From 33927f3d0ecdcff06326d6e4edb6166aed42811c Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 12 Jul 2025 06:02:31 +0100 Subject: habanalabs: fix UAF in export_dmabuf() As soon as we'd inserted a file reference into descriptor table, another thread could close it. That's fine for the case when all we are doing is returning that descriptor to userland (it's a race, but it's a userland race and there's nothing the kernel can do about it). However, if we follow fd_install() with any kind of access to objects that would be destroyed on close (be it the struct file itself or anything destroyed by its ->release()), we have a UAF. dma_buf_fd() is a combination of reserving a descriptor and fd_install(). habanalabs export_dmabuf() calls it and then proceeds to access the objects destroyed on close. In particular, it grabs an extra reference to another struct file that will be dropped as part of ->release() for ours; that "will be" is actually "might have already been". Fix that by reserving descriptor before anything else and do fd_install() only when everything had been set up. As a side benefit, we no longer have the failure exit with file already created, but reference to underlying file (as well as ->dmabuf_export_cnt, etc.) not grabbed yet; unlike dma_buf_fd(), fd_install() can't fail. Fixes: db1a8dd916aa ("habanalabs: add support for dma-buf exporter") Signed-off-by: Al Viro --- drivers/accel/habanalabs/common/memory.c | 23 +++++++---------------- 1 file changed, 7 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/accel/habanalabs/common/memory.c b/drivers/accel/habanalabs/common/memory.c index 601fdbe70179..61472a381904 100644 --- a/drivers/accel/habanalabs/common/memory.c +++ b/drivers/accel/habanalabs/common/memory.c @@ -1829,9 +1829,6 @@ static void hl_release_dmabuf(struct dma_buf *dmabuf) struct hl_dmabuf_priv *hl_dmabuf = dmabuf->priv; struct hl_ctx *ctx; - if (!hl_dmabuf) - return; - ctx = hl_dmabuf->ctx; if (hl_dmabuf->memhash_hnode) @@ -1859,7 +1856,12 @@ static int export_dmabuf(struct hl_ctx *ctx, { DEFINE_DMA_BUF_EXPORT_INFO(exp_info); struct hl_device *hdev = ctx->hdev; - int rc, fd; + CLASS(get_unused_fd, fd)(flags); + + if (fd < 0) { + dev_err(hdev->dev, "failed to get a file descriptor for a dma-buf, %d\n", fd); + return fd; + } exp_info.ops = &habanalabs_dmabuf_ops; exp_info.size = total_size; @@ -1872,13 +1874,6 @@ static int export_dmabuf(struct hl_ctx *ctx, return PTR_ERR(hl_dmabuf->dmabuf); } - fd = dma_buf_fd(hl_dmabuf->dmabuf, flags); - if (fd < 0) { - dev_err(hdev->dev, "failed to get a file descriptor for a dma-buf, %d\n", fd); - rc = fd; - goto err_dma_buf_put; - } - hl_dmabuf->ctx = ctx; hl_ctx_get(hl_dmabuf->ctx); atomic_inc(&ctx->hdev->dmabuf_export_cnt); @@ -1890,13 +1885,9 @@ static int export_dmabuf(struct hl_ctx *ctx, get_file(ctx->hpriv->file_priv->filp); *dmabuf_fd = fd; + fd_install(take_fd(fd), hl_dmabuf->dmabuf->file); return 0; - -err_dma_buf_put: - hl_dmabuf->dmabuf->priv = NULL; - dma_buf_put(hl_dmabuf->dmabuf); - return rc; } static int validate_export_params_common(struct hl_device *hdev, u64 addr, u64 size, u64 offset) -- cgit v1.2.3 From a2f54ff15c3bdc0132e20aae041607e2320dbd73 Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Mon, 28 Jul 2025 13:17:00 +0900 Subject: scsi: core: sysfs: Correct sysfs attributes access rights The SCSI sysfs attributes "supported_mode" and "active_mode" do not define a store method and thus cannot be modified. Correct the DEVICE_ATTR() call for these two attributes to not include S_IWUSR to allow write access as they are read-only. Signed-off-by: Damien Le Moal Link: https://lore.kernel.org/r/20250728041700.76660-1-dlemoal@kernel.org Reviewed-by: John Garry Reviewed-by: Johannes Thumshin Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_sysfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c index d772258e29ad..e6464b998960 100644 --- a/drivers/scsi/scsi_sysfs.c +++ b/drivers/scsi/scsi_sysfs.c @@ -265,7 +265,7 @@ show_shost_supported_mode(struct device *dev, struct device_attribute *attr, return show_shost_mode(supported_mode, buf); } -static DEVICE_ATTR(supported_mode, S_IRUGO | S_IWUSR, show_shost_supported_mode, NULL); +static DEVICE_ATTR(supported_mode, S_IRUGO, show_shost_supported_mode, NULL); static ssize_t show_shost_active_mode(struct device *dev, @@ -279,7 +279,7 @@ show_shost_active_mode(struct device *dev, return show_shost_mode(shost->active_mode, buf); } -static DEVICE_ATTR(active_mode, S_IRUGO | S_IWUSR, show_shost_active_mode, NULL); +static DEVICE_ATTR(active_mode, S_IRUGO, show_shost_active_mode, NULL); static int check_reset_type(const char *str) { -- cgit v1.2.3 From 383cd6d879a18acdaa84c29330b25c49cbc0b490 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Tue, 29 Jul 2025 07:49:30 +0100 Subject: scsi: scsi_debug: Make read-only arrays static const Don't populate the read-only arrays on the stack at run time, instead make them static const. Also reduces overall size. before: text data bss dec hex filename 367439 89582 5952 462973 7107d drivers/scsi/scsi_debug.o after: text data bss dec hex filename 365847 90702 5952 462501 70ea5 drivers/scsi/scsi_debug.o (gcc 14.2.0, x86-64) Signed-off-by: Colin Ian King Link: https://lore.kernel.org/r/20250729064930.1659007-1-colin.i.king@gmail.com Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_debug.c | 91 +++++++++++++++++++++++++++++------------------ 1 file changed, 57 insertions(+), 34 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c index 0847767d4d43..353cb60e1abe 100644 --- a/drivers/scsi/scsi_debug.c +++ b/drivers/scsi/scsi_debug.c @@ -2674,8 +2674,10 @@ static int resp_rsup_tmfs(struct scsi_cmnd *scp, static int resp_err_recov_pg(unsigned char *p, int pcontrol, int target) { /* Read-Write Error Recovery page for mode_sense */ - unsigned char err_recov_pg[] = {0x1, 0xa, 0xc0, 11, 240, 0, 0, 0, - 5, 0, 0xff, 0xff}; + static const unsigned char err_recov_pg[] = { + 0x1, 0xa, 0xc0, 11, 240, 0, 0, 0, + 5, 0, 0xff, 0xff + }; memcpy(p, err_recov_pg, sizeof(err_recov_pg)); if (1 == pcontrol) @@ -2685,8 +2687,10 @@ static int resp_err_recov_pg(unsigned char *p, int pcontrol, int target) static int resp_disconnect_pg(unsigned char *p, int pcontrol, int target) { /* Disconnect-Reconnect page for mode_sense */ - unsigned char disconnect_pg[] = {0x2, 0xe, 128, 128, 0, 10, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0}; + static const unsigned char disconnect_pg[] = { + 0x2, 0xe, 128, 128, 0, 10, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0 + }; memcpy(p, disconnect_pg, sizeof(disconnect_pg)); if (1 == pcontrol) @@ -2696,9 +2700,11 @@ static int resp_disconnect_pg(unsigned char *p, int pcontrol, int target) static int resp_format_pg(unsigned char *p, int pcontrol, int target) { /* Format device page for mode_sense */ - unsigned char format_pg[] = {0x3, 0x16, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0x40, 0, 0, 0}; + static const unsigned char format_pg[] = { + 0x3, 0x16, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0x40, 0, 0, 0 + }; memcpy(p, format_pg, sizeof(format_pg)); put_unaligned_be16(sdebug_sectors_per, p + 10); @@ -2716,10 +2722,14 @@ static unsigned char caching_pg[] = {0x8, 18, 0x14, 0, 0xff, 0xff, 0, 0, static int resp_caching_pg(unsigned char *p, int pcontrol, int target) { /* Caching page for mode_sense */ - unsigned char ch_caching_pg[] = {/* 0x8, 18, */ 0x4, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; - unsigned char d_caching_pg[] = {0x8, 18, 0x14, 0, 0xff, 0xff, 0, 0, - 0xff, 0xff, 0xff, 0xff, 0x80, 0x14, 0, 0, 0, 0, 0, 0}; + static const unsigned char ch_caching_pg[] = { + /* 0x8, 18, */ 0x4, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 + }; + static const unsigned char d_caching_pg[] = { + 0x8, 18, 0x14, 0, 0xff, 0xff, 0, 0, + 0xff, 0xff, 0xff, 0xff, 0x80, 0x14, 0, 0, 0, 0, 0, 0 + }; if (SDEBUG_OPT_N_WCE & sdebug_opts) caching_pg[2] &= ~0x4; /* set WCE=0 (default WCE=1) */ @@ -2738,8 +2748,10 @@ static int resp_ctrl_m_pg(unsigned char *p, int pcontrol, int target) { /* Control mode page for mode_sense */ unsigned char ch_ctrl_m_pg[] = {/* 0xa, 10, */ 0x6, 0, 0, 0, 0, 0, 0, 0, 0, 0}; - unsigned char d_ctrl_m_pg[] = {0xa, 10, 2, 0, 0, 0, 0, 0, - 0, 0, 0x2, 0x4b}; + static const unsigned char d_ctrl_m_pg[] = { + 0xa, 10, 2, 0, 0, 0, 0, 0, + 0, 0, 0x2, 0x4b + }; if (sdebug_dsense) ctrl_m_pg[2] |= 0x4; @@ -2794,10 +2806,14 @@ static int resp_grouping_m_pg(unsigned char *p, int pcontrol, int target) static int resp_iec_m_pg(unsigned char *p, int pcontrol, int target) { /* Informational Exceptions control mode page for mode_sense */ - unsigned char ch_iec_m_pg[] = {/* 0x1c, 0xa, */ 0x4, 0xf, 0, 0, 0, 0, - 0, 0, 0x0, 0x0}; - unsigned char d_iec_m_pg[] = {0x1c, 0xa, 0x08, 0, 0, 0, 0, 0, - 0, 0, 0x0, 0x0}; + static const unsigned char ch_iec_m_pg[] = { + /* 0x1c, 0xa, */ 0x4, 0xf, 0, 0, 0, 0, + 0, 0, 0x0, 0x0 + }; + static const unsigned char d_iec_m_pg[] = { + 0x1c, 0xa, 0x08, 0, 0, 0, 0, 0, + 0, 0, 0x0, 0x0 + }; memcpy(p, iec_m_pg, sizeof(iec_m_pg)); if (1 == pcontrol) @@ -2809,8 +2825,9 @@ static int resp_iec_m_pg(unsigned char *p, int pcontrol, int target) static int resp_sas_sf_m_pg(unsigned char *p, int pcontrol, int target) { /* SAS SSP mode page - short format for mode_sense */ - unsigned char sas_sf_m_pg[] = {0x19, 0x6, - 0x6, 0x0, 0x7, 0xd0, 0x0, 0x0}; + static const unsigned char sas_sf_m_pg[] = { + 0x19, 0x6, 0x6, 0x0, 0x7, 0xd0, 0x0, 0x0 + }; memcpy(p, sas_sf_m_pg, sizeof(sas_sf_m_pg)); if (1 == pcontrol) @@ -2854,9 +2871,10 @@ static int resp_sas_pcd_m_spg(unsigned char *p, int pcontrol, int target, static int resp_sas_sha_m_spg(unsigned char *p, int pcontrol) { /* SAS SSP shared protocol specific port mode subpage */ - unsigned char sas_sha_m_pg[] = {0x59, 0x2, 0, 0xc, 0, 0x6, 0x10, 0, - 0, 0, 0, 0, 0, 0, 0, 0, - }; + static const unsigned char sas_sha_m_pg[] = { + 0x59, 0x2, 0, 0xc, 0, 0x6, 0x10, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + }; memcpy(p, sas_sha_m_pg, sizeof(sas_sha_m_pg)); if (1 == pcontrol) @@ -2923,8 +2941,10 @@ static int process_medium_part_m_pg(struct sdebug_dev_info *devip, static int resp_compression_m_pg(unsigned char *p, int pcontrol, int target, unsigned char dce) { /* Compression page for mode_sense (tape) */ - unsigned char compression_pg[] = {0x0f, 14, 0x40, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 00, 00}; + static const unsigned char compression_pg[] = { + 0x0f, 14, 0x40, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0 + }; memcpy(p, compression_pg, sizeof(compression_pg)); if (dce) @@ -3282,9 +3302,10 @@ bad_pcode: static int resp_temp_l_pg(unsigned char *arr) { - unsigned char temp_l_pg[] = {0x0, 0x0, 0x3, 0x2, 0x0, 38, - 0x0, 0x1, 0x3, 0x2, 0x0, 65, - }; + static const unsigned char temp_l_pg[] = { + 0x0, 0x0, 0x3, 0x2, 0x0, 38, + 0x0, 0x1, 0x3, 0x2, 0x0, 65, + }; memcpy(arr, temp_l_pg, sizeof(temp_l_pg)); return sizeof(temp_l_pg); @@ -3292,8 +3313,9 @@ static int resp_temp_l_pg(unsigned char *arr) static int resp_ie_l_pg(unsigned char *arr) { - unsigned char ie_l_pg[] = {0x0, 0x0, 0x3, 0x3, 0x0, 0x0, 38, - }; + static const unsigned char ie_l_pg[] = { + 0x0, 0x0, 0x3, 0x3, 0x0, 0x0, 38, + }; memcpy(arr, ie_l_pg, sizeof(ie_l_pg)); if (iec_m_pg[2] & 0x4) { /* TEST bit set */ @@ -3305,11 +3327,12 @@ static int resp_ie_l_pg(unsigned char *arr) static int resp_env_rep_l_spg(unsigned char *arr) { - unsigned char env_rep_l_spg[] = {0x0, 0x0, 0x23, 0x8, - 0x0, 40, 72, 0xff, 45, 18, 0, 0, - 0x1, 0x0, 0x23, 0x8, - 0x0, 55, 72, 35, 55, 45, 0, 0, - }; + static const unsigned char env_rep_l_spg[] = { + 0x0, 0x0, 0x23, 0x8, + 0x0, 40, 72, 0xff, 45, 18, 0, 0, + 0x1, 0x0, 0x23, 0x8, + 0x0, 55, 72, 35, 55, 45, 0, 0, + }; memcpy(arr, env_rep_l_spg, sizeof(env_rep_l_spg)); return sizeof(env_rep_l_spg); -- cgit v1.2.3 From be71ce9796c36517c677ab1d3c6691423dd0bdec Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 8 Jul 2025 10:51:23 +0200 Subject: drm/bridge: fix OF node leak Make sure to drop the OF node reference taken when creating the aux bridge device when the device is later released. Fixes: 6914968a0b52 ("drm/bridge: properly refcount DT nodes in aux bridge drivers") Cc: Dmitry Baryshkov Signed-off-by: Johan Hovold Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20250708085124.15445-2-johan@kernel.org Signed-off-by: Dmitry Baryshkov --- drivers/gpu/drm/bridge/aux-bridge.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/bridge/aux-bridge.c b/drivers/gpu/drm/bridge/aux-bridge.c index b63304d3a80f..b3e4cdff61d6 100644 --- a/drivers/gpu/drm/bridge/aux-bridge.c +++ b/drivers/gpu/drm/bridge/aux-bridge.c @@ -18,6 +18,7 @@ static void drm_aux_bridge_release(struct device *dev) { struct auxiliary_device *adev = to_auxiliary_dev(dev); + of_node_put(dev->of_node); ida_free(&drm_aux_bridge_ida, adev->id); kfree(adev); @@ -65,6 +66,7 @@ int drm_aux_bridge_register(struct device *parent) ret = auxiliary_device_init(adev); if (ret) { + of_node_put(adev->dev.of_node); ida_free(&drm_aux_bridge_ida, adev->id); kfree(adev); return ret; -- cgit v1.2.3 From 7c527c15cdda2e0a26a05ac15a44d3e14738fc55 Mon Sep 17 00:00:00 2001 From: Takashi Sakamoto Date: Sun, 3 Aug 2025 21:20:12 +0900 Subject: firewire: core: use reference counting to invoke address handlers safely The lifetime of address handler has been managed by linked list and RCU. This approach was introduced in commit 35202f7d8420 ("firewire: remove global lock around address handlers, convert to RCU"). The invocations of address handler are performed within RCU read-side critical sections. In commit 57e6d9f85fff ("firewire: ohci: use workqueue to handle events of AR request/response contexts"), the invocations are in a workqueue context. The approach still imposes limitation that sleeping is not allowed within RCU read-side critical sections. However, since sleeping is not permitted within RCU read-side critical sections, this approach still has a limitation. This commit adds reference counting to decouple handler invocation from handler discovery. The linked list and RCU is used to discover the handlers, while the reference counting is used to invoke them safely. Link: https://lore.kernel.org/r/20250803122015.236493-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto --- drivers/firewire/core-transaction.c | 32 ++++++++++++++++++++++++++++++-- 1 file changed, 30 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/firewire/core-transaction.c b/drivers/firewire/core-transaction.c index d28477d84697..29ca9f3f14ce 100644 --- a/drivers/firewire/core-transaction.c +++ b/drivers/firewire/core-transaction.c @@ -550,6 +550,23 @@ const struct fw_address_region fw_unit_space_region = { .start = 0xfffff0000900ULL, .end = 0x1000000000000ULL, }; #endif /* 0 */ +static void complete_address_handler(struct kref *kref) +{ + struct fw_address_handler *handler = container_of(kref, struct fw_address_handler, kref); + + complete(&handler->done); +} + +static void get_address_handler(struct fw_address_handler *handler) +{ + kref_get(&handler->kref); +} + +static int put_address_handler(struct fw_address_handler *handler) +{ + return kref_put(&handler->kref, complete_address_handler); +} + /** * fw_core_add_address_handler() - register for incoming requests * @handler: callback @@ -596,6 +613,8 @@ int fw_core_add_address_handler(struct fw_address_handler *handler, if (other != NULL) { handler->offset += other->length; } else { + init_completion(&handler->done); + kref_init(&handler->kref); list_add_tail_rcu(&handler->link, &address_handler_list); ret = 0; break; @@ -621,6 +640,9 @@ void fw_core_remove_address_handler(struct fw_address_handler *handler) list_del_rcu(&handler->link); synchronize_rcu(); + + if (!put_address_handler(handler)) + wait_for_completion(&handler->done); } EXPORT_SYMBOL(fw_core_remove_address_handler); @@ -913,10 +935,13 @@ static void handle_exclusive_region_request(struct fw_card *card, scoped_guard(rcu) { handler = lookup_enclosing_address_handler(&address_handler_list, offset, request->length); - if (handler) + if (handler) { + get_address_handler(handler); handler->address_callback(card, request, tcode, destination, source, p->generation, offset, request->data, request->length, handler->callback_data); + put_address_handler(handler); + } } if (!handler) @@ -952,10 +977,13 @@ static void handle_fcp_region_request(struct fw_card *card, scoped_guard(rcu) { list_for_each_entry_rcu(handler, &address_handler_list, link) { - if (is_enclosing_handler(handler, offset, request->length)) + if (is_enclosing_handler(handler, offset, request->length)) { + get_address_handler(handler); handler->address_callback(card, request, tcode, destination, source, p->generation, offset, request->data, request->length, handler->callback_data); + put_address_handler(handler); + } } } -- cgit v1.2.3 From e8cf6875005b017c293bf1b9be707c43f3eff9f4 Mon Sep 17 00:00:00 2001 From: Takashi Sakamoto Date: Sun, 3 Aug 2025 21:20:13 +0900 Subject: firewire: core: call handler for exclusive regions outside RCU read-side critical section The previous commit added reference counting to ensure safe invocations of address handlers. This commit moves the invocation of handlers for exclusive regions outside of the RCU read-side critical section. The address handler for the requested region is selected within the critical section, then invoked outside of it. Link: https://lore.kernel.org/r/20250803122015.236493-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto --- drivers/firewire/core-transaction.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/firewire/core-transaction.c b/drivers/firewire/core-transaction.c index 29ca9f3f14ce..a742971c65fa 100644 --- a/drivers/firewire/core-transaction.c +++ b/drivers/firewire/core-transaction.c @@ -935,17 +935,19 @@ static void handle_exclusive_region_request(struct fw_card *card, scoped_guard(rcu) { handler = lookup_enclosing_address_handler(&address_handler_list, offset, request->length); - if (handler) { + if (handler) get_address_handler(handler); - handler->address_callback(card, request, tcode, destination, source, - p->generation, offset, request->data, - request->length, handler->callback_data); - put_address_handler(handler); - } } - if (!handler) + if (!handler) { fw_send_response(card, request, RCODE_ADDRESS_ERROR); + return; + } + + // Outside the RCU read-side critical section. Without spinlock. With reference count. + handler->address_callback(card, request, tcode, destination, source, p->generation, offset, + request->data, request->length, handler->callback_data); + put_address_handler(handler); } static void handle_fcp_region_request(struct fw_card *card, -- cgit v1.2.3 From e884a8a0c573ca5c191b269f31993733ecb6250e Mon Sep 17 00:00:00 2001 From: Takashi Sakamoto Date: Sun, 3 Aug 2025 21:20:14 +0900 Subject: firewire: core: call FCP address handlers outside RCU read-side critical section The former commit added reference counting to ensure safe invocations of address handlers. Unlike the exclusive-region address handlers, all FCP address handlers should be called on receiving an FCP request. This commit uses the part of kernel stack to collect address handlers up to 4 within the section, then invoke them outside of the section. Reference counting ensures that each handler remains valid and safe to call. Lifting the limitation of supporting only 4 handlers is left for next work. Link: https://lore.kernel.org/r/20250803122015.236493-4-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto --- drivers/firewire/core-transaction.c | 25 +++++++++++++++++++------ 1 file changed, 19 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/firewire/core-transaction.c b/drivers/firewire/core-transaction.c index a742971c65fa..7a62c660e912 100644 --- a/drivers/firewire/core-transaction.c +++ b/drivers/firewire/core-transaction.c @@ -950,13 +950,17 @@ static void handle_exclusive_region_request(struct fw_card *card, put_address_handler(handler); } +// To use kmalloc allocator efficiently, this should be power of two. +#define BUFFER_ON_KERNEL_STACK_SIZE 4 + static void handle_fcp_region_request(struct fw_card *card, struct fw_packet *p, struct fw_request *request, unsigned long long offset) { - struct fw_address_handler *handler; - int tcode, destination, source; + struct fw_address_handler *buffer_on_kernel_stack[BUFFER_ON_KERNEL_STACK_SIZE]; + struct fw_address_handler *handler, **handlers; + int tcode, destination, source, i, count; if ((offset != (CSR_REGISTER_BASE | CSR_FCP_COMMAND) && offset != (CSR_REGISTER_BASE | CSR_FCP_RESPONSE)) || @@ -977,18 +981,27 @@ static void handle_fcp_region_request(struct fw_card *card, return; } + count = 0; + handlers = buffer_on_kernel_stack; scoped_guard(rcu) { list_for_each_entry_rcu(handler, &address_handler_list, link) { if (is_enclosing_handler(handler, offset, request->length)) { get_address_handler(handler); - handler->address_callback(card, request, tcode, destination, source, - p->generation, offset, request->data, - request->length, handler->callback_data); - put_address_handler(handler); + handlers[count] = handler; + if (++count >= ARRAY_SIZE(buffer_on_kernel_stack)) + break; } } } + for (i = 0; i < count; ++i) { + handler = handlers[i]; + handler->address_callback(card, request, tcode, destination, source, + p->generation, offset, request->data, + request->length, handler->callback_data); + put_address_handler(handler); + } + fw_send_response(card, request, RCODE_COMPLETE); } -- cgit v1.2.3 From 0342273e14c25971f2916de2b598db2e9cfeec15 Mon Sep 17 00:00:00 2001 From: Takashi Sakamoto Date: Sun, 3 Aug 2025 21:20:15 +0900 Subject: firewire: core: reallocate buffer for FCP address handlers when more than 4 are registered The former commit has a limitation that only up to 4 FCP address handlers could be processed per request. Although it suffices for most use cases, it is technically a regression. This commit lifts the restriction by reallocating the buffer from kernel heap when more than 4 handlers are registered. The allocation is performed within RCU read-side critical section, thus it uses GCP_ATOMIC flag. The buffer size is rounded up to the next power of two to align with kmalloc allocation units. Link: https://lore.kernel.org/r/20250803122015.236493-5-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto --- drivers/firewire/core-transaction.c | 36 ++++++++++++++++++++++++++++++++---- 1 file changed, 32 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/firewire/core-transaction.c b/drivers/firewire/core-transaction.c index 7a62c660e912..1d1c2d8f85ae 100644 --- a/drivers/firewire/core-transaction.c +++ b/drivers/firewire/core-transaction.c @@ -960,7 +960,7 @@ static void handle_fcp_region_request(struct fw_card *card, { struct fw_address_handler *buffer_on_kernel_stack[BUFFER_ON_KERNEL_STACK_SIZE]; struct fw_address_handler *handler, **handlers; - int tcode, destination, source, i, count; + int tcode, destination, source, i, count, buffer_size; if ((offset != (CSR_REGISTER_BASE | CSR_FCP_COMMAND) && offset != (CSR_REGISTER_BASE | CSR_FCP_RESPONSE)) || @@ -983,13 +983,38 @@ static void handle_fcp_region_request(struct fw_card *card, count = 0; handlers = buffer_on_kernel_stack; + buffer_size = ARRAY_SIZE(buffer_on_kernel_stack); scoped_guard(rcu) { list_for_each_entry_rcu(handler, &address_handler_list, link) { if (is_enclosing_handler(handler, offset, request->length)) { + if (count >= buffer_size) { + int next_size = buffer_size * 2; + struct fw_address_handler **buffer_on_kernel_heap; + + if (handlers == buffer_on_kernel_stack) + buffer_on_kernel_heap = NULL; + else + buffer_on_kernel_heap = handlers; + + buffer_on_kernel_heap = + krealloc_array(buffer_on_kernel_heap, next_size, + sizeof(*buffer_on_kernel_heap), GFP_ATOMIC); + // FCP is used for purposes unrelated to significant system + // resources (e.g. storage or networking), so allocation + // failures are not considered so critical. + if (!buffer_on_kernel_heap) + break; + + if (handlers == buffer_on_kernel_stack) { + memcpy(buffer_on_kernel_heap, buffer_on_kernel_stack, + sizeof(buffer_on_kernel_stack)); + } + + handlers = buffer_on_kernel_heap; + buffer_size = next_size; + } get_address_handler(handler); - handlers[count] = handler; - if (++count >= ARRAY_SIZE(buffer_on_kernel_stack)) - break; + handlers[count++] = handler; } } } @@ -1002,6 +1027,9 @@ static void handle_fcp_region_request(struct fw_card *card, put_address_handler(handler); } + if (handlers != buffer_on_kernel_stack) + kfree(handlers); + fw_send_response(card, request, RCODE_COMPLETE); } -- cgit v1.2.3 From 584460393efbcccb6388b1cd5d37284b5326709c Mon Sep 17 00:00:00 2001 From: Andy Yan Date: Wed, 16 Jul 2025 20:55:55 +0800 Subject: drm/bridge: Describe the newly introduced drm_connector parameter for drm_bridge_detect This fix the make htmldocs warnings: drivers/gpu/drm/drm_bridge.c:1242: warning: Function parameter or struct member 'connector' not described in 'drm_bridge_detect' Fixes: 5d156a9c3d5e ("drm/bridge: Pass down connector to drm bridge detect hook") Signed-off-by: Andy Yan Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20250716125602.3166573-1-andyshrk@163.com Signed-off-by: Dmitry Baryshkov --- drivers/gpu/drm/drm_bridge.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_bridge.c b/drivers/gpu/drm/drm_bridge.c index dd45d9b504d8..4bde00083047 100644 --- a/drivers/gpu/drm/drm_bridge.c +++ b/drivers/gpu/drm/drm_bridge.c @@ -1227,6 +1227,7 @@ EXPORT_SYMBOL(drm_atomic_bridge_chain_check); /** * drm_bridge_detect - check if anything is attached to the bridge output * @bridge: bridge control structure + * @connector: attached connector * * If the bridge supports output detection, as reported by the * DRM_BRIDGE_OP_DETECT bridge ops flag, call &drm_bridge_funcs.detect for the -- cgit v1.2.3 From 034d319c8899e8c5c0a35c6692c7fc7e8c12c374 Mon Sep 17 00:00:00 2001 From: Nitin Rawat Date: Tue, 29 Jul 2025 04:27:11 +0530 Subject: scsi: ufs: core: Fix interrupt handling for MCQ Mode Commit 3c7ac40d7322 ("scsi: ufs: core: Delegate the interrupt service routine to a threaded IRQ handler") introduced a regression where the UFS interrupt status register (IS) was not cleared in ufshcd_intr() when operating in MCQ mode. As a result, the IS register remained uncleared. This led to a persistent issue during UIC interrupts: ufshcd_is_auto_hibern8_error() consistently returned true because the UFSHCD_UIC_HIBERN8_MASK bit was set, while the active command was neither UIC_CMD_DME_HIBER_ENTER nor UIC_CMD_DME_HIBER_EXIT. This caused continuous auto hibern8 enter errors and device failed to boot. To fix this, ensure that the interrupt status register is properly cleared in the ufshcd_intr() function for both MCQ mode with ESI enabled. [ 4.553226] ufshcd-qcom 1d84000.ufs: ufshcd_check_errors: Auto Hibern8 Enter failed - status: 0x00000040, upmcrs: 0x00000001 [ 4.553229] ufshcd-qcom 1d84000.ufs: ufshcd_check_errors: saved_err 0x40 saved_uic_err 0x0 [ 4.553311] host_regs: 00000000: d5c7033f 20e0071f 00000400 00000000 [ 4.553312] host_regs: 00000010: 01000000 00010217 00000c96 00000000 [ 4.553314] host_regs: 00000020: 00000440 00170ef5 00000000 00000000 [ 4.553316] host_regs: 00000030: 0000010f 00000001 00000000 00000000 [ 4.553317] host_regs: 00000040: 00000000 00000000 00000000 00000000 [ 4.553319] host_regs: 00000050: fffdf000 0000000f 00000000 00000000 [ 4.553320] host_regs: 00000060: 00000001 80000000 00000000 00000000 [ 4.553322] host_regs: 00000070: fffde000 0000000f 00000000 00000000 [ 4.553323] host_regs: 00000080: 00000001 00000000 00000000 00000000 [ 4.553325] host_regs: 00000090: 00000002 d0020000 00000000 01930200 Fixes: 3c7ac40d7322 ("scsi: ufs: core: Delegate the interrupt service routine to a threaded IRQ handler") Co-developed-by: Palash Kambar Signed-off-by: Palash Kambar Signed-off-by: Nitin Rawat Link: https://lore.kernel.org/r/20250728225711.29273-1-quic_nitirawa@quicinc.com Tested-by: Neil Armstrong # on SM8650-QRD Reviewed-by: Bart Van Assche Reviewed-by: Peter Wang Signed-off-by: Martin K. Petersen --- drivers/ufs/core/ufshcd.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c index 5442bb8540b5..baf28bd748cc 100644 --- a/drivers/ufs/core/ufshcd.c +++ b/drivers/ufs/core/ufshcd.c @@ -7133,14 +7133,19 @@ static irqreturn_t ufshcd_threaded_intr(int irq, void *__hba) static irqreturn_t ufshcd_intr(int irq, void *__hba) { struct ufs_hba *hba = __hba; + u32 intr_status, enabled_intr_status; /* Move interrupt handling to thread when MCQ & ESI are not enabled */ if (!hba->mcq_enabled || !hba->mcq_esi_enabled) return IRQ_WAKE_THREAD; + intr_status = ufshcd_readl(hba, REG_INTERRUPT_STATUS); + enabled_intr_status = intr_status & ufshcd_readl(hba, REG_INTERRUPT_ENABLE); + + ufshcd_writel(hba, intr_status, REG_INTERRUPT_STATUS); + /* Directly handle interrupts since MCQ ESI handlers does the hard job */ - return ufshcd_sl_intr(hba, ufshcd_readl(hba, REG_INTERRUPT_STATUS) & - ufshcd_readl(hba, REG_INTERRUPT_ENABLE)); + return ufshcd_sl_intr(hba, enabled_intr_status); } static int ufshcd_clear_tm_cmd(struct ufs_hba *hba, int tag) -- cgit v1.2.3 From a59976116a01dad1c72460f9ed700bf4b3fdbebd Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 31 Jul 2025 13:33:11 +0200 Subject: scsi: lpfc: Fix wrong function reference in a comment Function scsi_host_remove() doesn't exist, the actual function name is scsi_remove_host(). Signed-off-by: Jean Delvare Link: https://lore.kernel.org/r/20250731133311.52034cc4@endymion Reviewed-by: Justin Tee Signed-off-by: Martin K. Petersen --- drivers/scsi/lpfc/lpfc_vport.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c index 2797aa75a689..aff6c9d5e7c2 100644 --- a/drivers/scsi/lpfc/lpfc_vport.c +++ b/drivers/scsi/lpfc/lpfc_vport.c @@ -666,7 +666,7 @@ lpfc_vport_delete(struct fc_vport *fc_vport) * Take early refcount for outstanding I/O requests we schedule during * delete processing for unreg_vpi. Always keep this before * scsi_remove_host() as we can no longer obtain a reference through - * scsi_host_get() after scsi_host_remove as shost is set to SHOST_DEL. + * scsi_host_get() after scsi_remove_host as shost is set to SHOST_DEL. */ if (!scsi_host_get(shost)) return VPORT_INVAL; -- cgit v1.2.3 From eea6cafb5890db488fce1c69d05464214616d800 Mon Sep 17 00:00:00 2001 From: Jiasheng Jiang Date: Fri, 1 Aug 2025 18:52:02 +0000 Subject: scsi: lpfc: Remove redundant assignment to avoid memory leak Remove the redundant assignment if kzalloc() succeeds to avoid memory leak. Fixes: bd2cdd5e400f ("scsi: lpfc: NVME Initiator: Add debugfs support") Signed-off-by: Jiasheng Jiang Link: https://lore.kernel.org/r/20250801185202.42631-1-jiashengjiangcool@gmail.com Reviewed-by: Justin Tee Signed-off-by: Martin K. Petersen --- drivers/scsi/lpfc/lpfc_debugfs.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c index 2c7d876c64c7..47cffdf2a8ac 100644 --- a/drivers/scsi/lpfc/lpfc_debugfs.c +++ b/drivers/scsi/lpfc/lpfc_debugfs.c @@ -6289,7 +6289,6 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport) } phba->nvmeio_trc_on = 1; phba->nvmeio_trc_output_idx = 0; - phba->nvmeio_trc = NULL; } else { nvmeio_off: phba->nvmeio_trc_size = 0; -- cgit v1.2.3 From 7ec2bd6cd2d0ce6d6224519f895cb932ed5af667 Mon Sep 17 00:00:00 2001 From: Peter Wang Date: Mon, 4 Aug 2025 14:01:54 +0800 Subject: scsi: ufs: mediatek: Fix out-of-bounds access in MCQ IRQ mapping Address a potential out-of-bounds access issue when accessing 'host->mcq_intr_info[q_index]'. The value of 'q_index' might exceed the valid array bounds if 'q_index == nr'. Correct condition to 'q_index >= nr' to prevent accessing invalid memory. Fixes: 66e26a4b8a77 ("scsi: ufs: host: mediatek: Set IRQ affinity policy for MCQ mode") Cc: stable@vger.kernel.org Reported-by: Dan Carpenter Signed-off-by: Peter Wang Link: https://lore.kernel.org/r/20250804060249.1387057-1-peter.wang@mediatek.com Signed-off-by: Martin K. Petersen --- drivers/ufs/host/ufs-mediatek.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ufs/host/ufs-mediatek.c b/drivers/ufs/host/ufs-mediatek.c index 86ae73b89d4d..f902ce08c95a 100644 --- a/drivers/ufs/host/ufs-mediatek.c +++ b/drivers/ufs/host/ufs-mediatek.c @@ -818,7 +818,7 @@ static u32 ufs_mtk_mcq_get_irq(struct ufs_hba *hba, unsigned int cpu) unsigned int q_index; q_index = map->mq_map[cpu]; - if (q_index > nr) { + if (q_index >= nr) { dev_err(hba->dev, "hwq index %d exceed %d\n", q_index, nr); return MTK_MCQ_INVALID_IRQ; -- cgit v1.2.3 From 72fc388d8bc0b49fd038477b74618cc15ce18b56 Mon Sep 17 00:00:00 2001 From: Waqar Hameed Date: Tue, 5 Aug 2025 11:33:36 +0200 Subject: scsi: ufs: core: Remove error print for devm_add_action_or_reset() When devm_add_action_or_reset() fails, it is due to a failed memory allocation and will thus return -ENOMEM. dev_err_probe() doesn't do anything when error is -ENOMEM. Therefore, remove the useless call to dev_err_probe() when devm_add_action_or_reset() fails, and just return the value instead. Signed-off-by: Waqar Hameed Link: https://lore.kernel.org/r/pndtt2mkt8v.a.out@axis.com Signed-off-by: Martin K. Petersen --- drivers/ufs/core/ufshcd.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c index baf28bd748cc..2e1fa8cf83f5 100644 --- a/drivers/ufs/core/ufshcd.c +++ b/drivers/ufs/core/ufshcd.c @@ -10515,8 +10515,7 @@ int ufshcd_alloc_host(struct device *dev, struct ufs_hba **hba_handle) err = devm_add_action_or_reset(dev, ufshcd_devres_release, host); if (err) - return dev_err_probe(dev, err, - "failed to add ufshcd dealloc action\n"); + return err; host->nr_maps = HCTX_TYPE_POLL + 1; hba = shost_priv(host); -- cgit v1.2.3 From f8f6e72fe28595969829d63db93ecaa56a0c2811 Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Tue, 5 Aug 2025 20:57:50 +0300 Subject: drm/omap: Pass along the format info from .fb_create() to drm_helper_mode_fill_fb_struct() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plumb the format info from .fb_create() all the way to drm_helper_mode_fill_fb_struct() to avoid the redundant lookup. For the fbdev case a manual drm_get_format_info() lookup is needed. The patch is based on the driver parts of the patchset at Link: below, which missed converting the omap driver. Due to the absence of this change in the patchset at Link:, after the Fixed: commit below, omap_framebuffer_init() -> drm_helper_mode_fill_fb_struct() set drm_framebuffer::format incorrectly to NULL, which lead to the !fb->format WARN() in drm_framebuffer_init() and causing framebuffer creation to fail. This patch fixes both of these issues. v2: Amend the commit log mentioning the functional issues the patch fixes. (Tomi) Cc: Ville Syrjälä Cc: Tomi Valkeinen Cc: Thomas Zimmermann Cc: Maarten Lankhorst Cc: Maxime Ripard Fixes: 41ab92d35ccd ("drm: Make passing of format info to drm_helper_mode_fill_fb_struct() mandatory") Reported-by: Mark Brown Closes: https://lore.kernel.org/all/98b3a62c-91ff-4f91-a58b-e1265f84180b@sirena.org.uk Link: https://lore.kernel.org/all/20250701090722.13645-1-ville.syrjala@linux.intel.com Tested-by: Mark Brown Tested-by: Linux Kernel Functional Testing Acked-by: Alex Deucher Reviewed-by: Tomi Valkeinen Signed-off-by: Imre Deak Link: https://lore.kernel.org/r/20250805175752.690504-2-imre.deak@intel.com --- drivers/gpu/drm/omapdrm/omap_fb.c | 23 ++++++++++------------- drivers/gpu/drm/omapdrm/omap_fb.h | 2 ++ drivers/gpu/drm/omapdrm/omap_fbdev.c | 5 ++++- 3 files changed, 16 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/omapdrm/omap_fb.c b/drivers/gpu/drm/omapdrm/omap_fb.c index 30c81e2e5d6b..bb3105556f19 100644 --- a/drivers/gpu/drm/omapdrm/omap_fb.c +++ b/drivers/gpu/drm/omapdrm/omap_fb.c @@ -351,7 +351,7 @@ struct drm_framebuffer *omap_framebuffer_create(struct drm_device *dev, } } - fb = omap_framebuffer_init(dev, mode_cmd, bos); + fb = omap_framebuffer_init(dev, info, mode_cmd, bos); if (IS_ERR(fb)) goto error; @@ -365,9 +365,9 @@ error: } struct drm_framebuffer *omap_framebuffer_init(struct drm_device *dev, + const struct drm_format_info *info, const struct drm_mode_fb_cmd2 *mode_cmd, struct drm_gem_object **bos) { - const struct drm_format_info *format = NULL; struct omap_framebuffer *omap_fb = NULL; struct drm_framebuffer *fb = NULL; unsigned int pitch = mode_cmd->pitches[0]; @@ -377,15 +377,12 @@ struct drm_framebuffer *omap_framebuffer_init(struct drm_device *dev, dev, mode_cmd, mode_cmd->width, mode_cmd->height, (char *)&mode_cmd->pixel_format); - format = drm_get_format_info(dev, mode_cmd->pixel_format, - mode_cmd->modifier[0]); - for (i = 0; i < ARRAY_SIZE(formats); i++) { if (formats[i] == mode_cmd->pixel_format) break; } - if (!format || i == ARRAY_SIZE(formats)) { + if (i == ARRAY_SIZE(formats)) { dev_dbg(dev->dev, "unsupported pixel format: %4.4s\n", (char *)&mode_cmd->pixel_format); ret = -EINVAL; @@ -399,7 +396,7 @@ struct drm_framebuffer *omap_framebuffer_init(struct drm_device *dev, } fb = &omap_fb->base; - omap_fb->format = format; + omap_fb->format = info; mutex_init(&omap_fb->lock); /* @@ -407,23 +404,23 @@ struct drm_framebuffer *omap_framebuffer_init(struct drm_device *dev, * that the two planes of multiplane formats need the same number of * bytes per pixel. */ - if (format->num_planes == 2 && pitch != mode_cmd->pitches[1]) { + if (info->num_planes == 2 && pitch != mode_cmd->pitches[1]) { dev_dbg(dev->dev, "pitches differ between planes 0 and 1\n"); ret = -EINVAL; goto fail; } - if (pitch % format->cpp[0]) { + if (pitch % info->cpp[0]) { dev_dbg(dev->dev, "buffer pitch (%u bytes) is not a multiple of pixel size (%u bytes)\n", - pitch, format->cpp[0]); + pitch, info->cpp[0]); ret = -EINVAL; goto fail; } - for (i = 0; i < format->num_planes; i++) { + for (i = 0; i < info->num_planes; i++) { struct plane *plane = &omap_fb->planes[i]; - unsigned int vsub = i == 0 ? 1 : format->vsub; + unsigned int vsub = i == 0 ? 1 : info->vsub; unsigned int size; size = pitch * mode_cmd->height / vsub; @@ -440,7 +437,7 @@ struct drm_framebuffer *omap_framebuffer_init(struct drm_device *dev, plane->dma_addr = 0; } - drm_helper_mode_fill_fb_struct(dev, fb, NULL, mode_cmd); + drm_helper_mode_fill_fb_struct(dev, fb, info, mode_cmd); ret = drm_framebuffer_init(dev, fb, &omap_framebuffer_funcs); if (ret) { diff --git a/drivers/gpu/drm/omapdrm/omap_fb.h b/drivers/gpu/drm/omapdrm/omap_fb.h index 0873f953cf1d..e6010302a22b 100644 --- a/drivers/gpu/drm/omapdrm/omap_fb.h +++ b/drivers/gpu/drm/omapdrm/omap_fb.h @@ -13,6 +13,7 @@ struct drm_connector; struct drm_device; struct drm_file; struct drm_framebuffer; +struct drm_format_info; struct drm_gem_object; struct drm_mode_fb_cmd2; struct drm_plane_state; @@ -23,6 +24,7 @@ struct drm_framebuffer *omap_framebuffer_create(struct drm_device *dev, struct drm_file *file, const struct drm_format_info *info, const struct drm_mode_fb_cmd2 *mode_cmd); struct drm_framebuffer *omap_framebuffer_init(struct drm_device *dev, + const struct drm_format_info *info, const struct drm_mode_fb_cmd2 *mode_cmd, struct drm_gem_object **bos); int omap_framebuffer_pin(struct drm_framebuffer *fb); void omap_framebuffer_unpin(struct drm_framebuffer *fb); diff --git a/drivers/gpu/drm/omapdrm/omap_fbdev.c b/drivers/gpu/drm/omapdrm/omap_fbdev.c index 7b6396890681..948af7ec1130 100644 --- a/drivers/gpu/drm/omapdrm/omap_fbdev.c +++ b/drivers/gpu/drm/omapdrm/omap_fbdev.c @@ -197,7 +197,10 @@ int omap_fbdev_driver_fbdev_probe(struct drm_fb_helper *helper, goto fail; } - fb = omap_framebuffer_init(dev, &mode_cmd, &bo); + fb = omap_framebuffer_init(dev, + drm_get_format_info(dev, mode_cmd.pixel_format, + mode_cmd.modifier[0]), + &mode_cmd, &bo); if (IS_ERR(fb)) { dev_err(dev->dev, "failed to allocate fb\n"); /* note: if fb creation failed, we can't rely on fb destroy -- cgit v1.2.3 From d2b524c9064301471e8ffe4ffd85ab8870966aa4 Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Tue, 5 Aug 2025 20:57:51 +0300 Subject: drm/nouveau: Pass along the format info from .fb_create() to drm_helper_mode_fill_fb_struct() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plumb the format info from .fb_create() all the way to drm_helper_mode_fill_fb_struct() to avoid the redundant lookup. The patch is based on the driver parts of the patchset at Link: below, which missed converting the nouveau driver. Due to the absence of this change in the patchset at Link:, after the Fixed: commit below, nouveau_framebuffer_new() -> drm_helper_mode_fill_fb_struct() set drm_framebuffer::format incorrectly to NULL, which lead to the !fb->format WARN() in drm_framebuffer_init() and causing framebuffer creation to fail. This patch fixes both of these issues. v2: Amend the commit log mentioning the functional issues the patch fixes. (Tomi) Cc: Ville Syrjälä Cc: Lyude Paul Cc: Danilo Krummrich Cc: Thomas Zimmermann Cc: Maarten Lankhorst Cc: Maxime Ripard Cc: Tomi Valkeinen Cc: nouveau@lists.freedesktop.org Fixes: 41ab92d35ccd ("drm: Make passing of format info to drm_helper_mode_fill_fb_struct() mandatory") Link: https://lore.kernel.org/all/20250701090722.13645-1-ville.syrjala@linux.intel.com Acked-by: Alex Deucher Acked-by: Danilo Krummrich Reviewed-by: James Jones Tested-by: Linux Kernel Functional Testing Tested-by: James Jones Signed-off-by: Imre Deak Link: https://lore.kernel.org/r/20250805175752.690504-3-imre.deak@intel.com --- drivers/gpu/drm/nouveau/nouveau_display.c | 9 +++------ drivers/gpu/drm/nouveau/nouveau_display.h | 3 +++ 2 files changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c index e1e542126310..805d0a87aa54 100644 --- a/drivers/gpu/drm/nouveau/nouveau_display.c +++ b/drivers/gpu/drm/nouveau/nouveau_display.c @@ -253,6 +253,7 @@ nouveau_check_bl_size(struct nouveau_drm *drm, struct nouveau_bo *nvbo, int nouveau_framebuffer_new(struct drm_device *dev, + const struct drm_format_info *info, const struct drm_mode_fb_cmd2 *mode_cmd, struct drm_gem_object *gem, struct drm_framebuffer **pfb) @@ -260,7 +261,6 @@ nouveau_framebuffer_new(struct drm_device *dev, struct nouveau_drm *drm = nouveau_drm(dev); struct nouveau_bo *nvbo = nouveau_gem_object(gem); struct drm_framebuffer *fb; - const struct drm_format_info *info; unsigned int height, i; uint32_t tile_mode; uint8_t kind; @@ -295,9 +295,6 @@ nouveau_framebuffer_new(struct drm_device *dev, kind = nvbo->kind; } - info = drm_get_format_info(dev, mode_cmd->pixel_format, - mode_cmd->modifier[0]); - for (i = 0; i < info->num_planes; i++) { height = drm_format_info_plane_height(info, mode_cmd->height, @@ -321,7 +318,7 @@ nouveau_framebuffer_new(struct drm_device *dev, if (!(fb = *pfb = kzalloc(sizeof(*fb), GFP_KERNEL))) return -ENOMEM; - drm_helper_mode_fill_fb_struct(dev, fb, NULL, mode_cmd); + drm_helper_mode_fill_fb_struct(dev, fb, info, mode_cmd); fb->obj[0] = gem; ret = drm_framebuffer_init(dev, fb, &nouveau_framebuffer_funcs); @@ -344,7 +341,7 @@ nouveau_user_framebuffer_create(struct drm_device *dev, if (!gem) return ERR_PTR(-ENOENT); - ret = nouveau_framebuffer_new(dev, mode_cmd, gem, &fb); + ret = nouveau_framebuffer_new(dev, info, mode_cmd, gem, &fb); if (ret == 0) return fb; diff --git a/drivers/gpu/drm/nouveau/nouveau_display.h b/drivers/gpu/drm/nouveau/nouveau_display.h index e45f211501f6..470e0910d484 100644 --- a/drivers/gpu/drm/nouveau/nouveau_display.h +++ b/drivers/gpu/drm/nouveau/nouveau_display.h @@ -8,8 +8,11 @@ #include +struct drm_format_info; + int nouveau_framebuffer_new(struct drm_device *dev, + const struct drm_format_info *info, const struct drm_mode_fb_cmd2 *mode_cmd, struct drm_gem_object *gem, struct drm_framebuffer **pfb); -- cgit v1.2.3 From c0a8e4443d768e5c86ddb52a3a744a151e7b72b0 Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Tue, 5 Aug 2025 20:57:52 +0300 Subject: drm/radeon: Pass along the format info from .fb_create() to drm_helper_mode_fill_fb_struct() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plumb the format info from .fb_create() all the way to drm_helper_mode_fill_fb_struct() to avoid the redundant lookup. For the fbdev case a manual drm_get_format_info() lookup is needed. The patch is based on the driver parts of the patchset at Link: below, which missed converting the radeon driver. Due to the absence of this change in the patchset at Link:, after the Fixed: commit below, radeon_framebuffer_init() -> drm_helper_mode_fill_fb_struct() set drm_framebuffer::format incorrectly to NULL, which lead to the !fb->format WARN() in drm_framebuffer_init() and causing framebuffer creation to fail. This patch fixes both of these issues. v2: Amend the commit log mentioning the functional issues the patch fixes. (Tomi) Cc: Ville Syrjälä Cc: Alex Deucher Cc: Christian König Cc: Thomas Zimmermann Cc: Maarten Lankhorst Cc: Maxime Ripard Cc: amd-gfx@lists.freedesktop.org Cc: Tomi Valkeinen Fixes: 41ab92d35ccd ("drm: Make passing of format info to drm_helper_mode_fill_fb_struct() mandatory") Link: https://lore.kernel.org/all/20250701090722.13645-1-ville.syrjala@linux.intel.com Acked-by: Alex Deucher Tested-by: Linux Kernel Functional Testing Signed-off-by: Imre Deak Link: https://lore.kernel.org/r/20250805175752.690504-4-imre.deak@intel.com --- drivers/gpu/drm/radeon/radeon_display.c | 5 +++-- drivers/gpu/drm/radeon/radeon_fbdev.c | 11 ++++++----- drivers/gpu/drm/radeon/radeon_mode.h | 2 ++ 3 files changed, 11 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index b4bf5dfeea2d..4dc77c398617 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -1297,12 +1297,13 @@ static const struct drm_framebuffer_funcs radeon_fb_funcs = { int radeon_framebuffer_init(struct drm_device *dev, struct drm_framebuffer *fb, + const struct drm_format_info *info, const struct drm_mode_fb_cmd2 *mode_cmd, struct drm_gem_object *obj) { int ret; fb->obj[0] = obj; - drm_helper_mode_fill_fb_struct(dev, fb, NULL, mode_cmd); + drm_helper_mode_fill_fb_struct(dev, fb, info, mode_cmd); ret = drm_framebuffer_init(dev, fb, &radeon_fb_funcs); if (ret) { fb->obj[0] = NULL; @@ -1341,7 +1342,7 @@ radeon_user_framebuffer_create(struct drm_device *dev, return ERR_PTR(-ENOMEM); } - ret = radeon_framebuffer_init(dev, fb, mode_cmd, obj); + ret = radeon_framebuffer_init(dev, fb, info, mode_cmd, obj); if (ret) { kfree(fb); drm_gem_object_put(obj); diff --git a/drivers/gpu/drm/radeon/radeon_fbdev.c b/drivers/gpu/drm/radeon/radeon_fbdev.c index e3a481bbee7b..dc81b0c2dbff 100644 --- a/drivers/gpu/drm/radeon/radeon_fbdev.c +++ b/drivers/gpu/drm/radeon/radeon_fbdev.c @@ -53,10 +53,10 @@ static void radeon_fbdev_destroy_pinned_object(struct drm_gem_object *gobj) } static int radeon_fbdev_create_pinned_object(struct drm_fb_helper *fb_helper, + const struct drm_format_info *info, struct drm_mode_fb_cmd2 *mode_cmd, struct drm_gem_object **gobj_p) { - const struct drm_format_info *info; struct radeon_device *rdev = fb_helper->dev->dev_private; struct drm_gem_object *gobj = NULL; struct radeon_bo *rbo = NULL; @@ -67,8 +67,6 @@ static int radeon_fbdev_create_pinned_object(struct drm_fb_helper *fb_helper, int height = mode_cmd->height; u32 cpp; - info = drm_get_format_info(rdev_to_drm(rdev), mode_cmd->pixel_format, - mode_cmd->modifier[0]); cpp = info->cpp[0]; /* need to align pitch with crtc limits */ @@ -206,6 +204,7 @@ int radeon_fbdev_driver_fbdev_probe(struct drm_fb_helper *fb_helper, struct drm_fb_helper_surface_size *sizes) { struct radeon_device *rdev = fb_helper->dev->dev_private; + const struct drm_format_info *format_info; struct drm_mode_fb_cmd2 mode_cmd = { }; struct fb_info *info; struct drm_gem_object *gobj; @@ -224,7 +223,9 @@ int radeon_fbdev_driver_fbdev_probe(struct drm_fb_helper *fb_helper, mode_cmd.pixel_format = drm_mode_legacy_fb_format(sizes->surface_bpp, sizes->surface_depth); - ret = radeon_fbdev_create_pinned_object(fb_helper, &mode_cmd, &gobj); + format_info = drm_get_format_info(rdev_to_drm(rdev), mode_cmd.pixel_format, + mode_cmd.modifier[0]); + ret = radeon_fbdev_create_pinned_object(fb_helper, format_info, &mode_cmd, &gobj); if (ret) { DRM_ERROR("failed to create fbcon object %d\n", ret); return ret; @@ -236,7 +237,7 @@ int radeon_fbdev_driver_fbdev_probe(struct drm_fb_helper *fb_helper, ret = -ENOMEM; goto err_radeon_fbdev_destroy_pinned_object; } - ret = radeon_framebuffer_init(rdev_to_drm(rdev), fb, &mode_cmd, gobj); + ret = radeon_framebuffer_init(rdev_to_drm(rdev), fb, format_info, &mode_cmd, gobj); if (ret) { DRM_ERROR("failed to initialize framebuffer %d\n", ret); goto err_kfree; diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index 3102f6c2d055..9e34da2cacef 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -40,6 +40,7 @@ struct drm_fb_helper; struct drm_fb_helper_surface_size; +struct drm_format_info; struct edid; struct drm_edid; @@ -890,6 +891,7 @@ extern void radeon_combios_encoder_dpms_scratch_regs(struct drm_encoder *encoder, bool on); int radeon_framebuffer_init(struct drm_device *dev, struct drm_framebuffer *rfb, + const struct drm_format_info *info, const struct drm_mode_fb_cmd2 *mode_cmd, struct drm_gem_object *obj); -- cgit v1.2.3 From c875503a9b9082928d7d3fc60b5400d16fbfae4e Mon Sep 17 00:00:00 2001 From: Jijie Shao Date: Wed, 6 Aug 2025 18:27:56 +0800 Subject: net: hibmcge: fix rtnl deadlock issue Currently, the hibmcge netdev acquires the rtnl_lock in pci_error_handlers.reset_prepare() and releases it in pci_error_handlers.reset_done(). However, in the PCI framework: pci_reset_bus - __pci_reset_slot - pci_slot_save_and_disable_locked - pci_dev_save_and_disable - err_handler->reset_prepare(dev); In pci_slot_save_and_disable_locked(): list_for_each_entry(dev, &slot->bus->devices, bus_list) { if (!dev->slot || dev->slot!= slot) continue; pci_dev_save_and_disable(dev); if (dev->subordinate) pci_bus_save_and_disable_locked(dev->subordinate); } This will iterate through all devices under the current bus and execute err_handler->reset_prepare(), causing two devices of the hibmcge driver to sequentially request the rtnl_lock, leading to a deadlock. Since the driver now executes netif_device_detach() before the reset process, it will not concurrently with other netdev APIs, so there is no need to hold the rtnl_lock now. Therefore, this patch removes the rtnl_lock during the reset process and adjusts the position of HBG_NIC_STATE_RESETTING to ensure that multiple resets are not executed concurrently. Fixes: 3f5a61f6d504f ("net: hibmcge: Add reset supported in this module") Signed-off-by: Jijie Shao Reviewed-by: Simon Horman Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/hisilicon/hibmcge/hbg_err.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/hisilicon/hibmcge/hbg_err.c b/drivers/net/ethernet/hisilicon/hibmcge/hbg_err.c index 503cfbfb4a8a..83cf75bf7a17 100644 --- a/drivers/net/ethernet/hisilicon/hibmcge/hbg_err.c +++ b/drivers/net/ethernet/hisilicon/hibmcge/hbg_err.c @@ -53,9 +53,11 @@ static int hbg_reset_prepare(struct hbg_priv *priv, enum hbg_reset_type type) { int ret; - ASSERT_RTNL(); + if (test_and_set_bit(HBG_NIC_STATE_RESETTING, &priv->state)) + return -EBUSY; if (netif_running(priv->netdev)) { + clear_bit(HBG_NIC_STATE_RESETTING, &priv->state); dev_warn(&priv->pdev->dev, "failed to reset because port is up\n"); return -EBUSY; @@ -64,7 +66,6 @@ static int hbg_reset_prepare(struct hbg_priv *priv, enum hbg_reset_type type) netif_device_detach(priv->netdev); priv->reset_type = type; - set_bit(HBG_NIC_STATE_RESETTING, &priv->state); clear_bit(HBG_NIC_STATE_RESET_FAIL, &priv->state); ret = hbg_hw_event_notify(priv, HBG_HW_EVENT_RESET); if (ret) { @@ -84,29 +85,26 @@ static int hbg_reset_done(struct hbg_priv *priv, enum hbg_reset_type type) type != priv->reset_type) return 0; - ASSERT_RTNL(); - - clear_bit(HBG_NIC_STATE_RESETTING, &priv->state); ret = hbg_rebuild(priv); if (ret) { priv->stats.reset_fail_cnt++; set_bit(HBG_NIC_STATE_RESET_FAIL, &priv->state); + clear_bit(HBG_NIC_STATE_RESETTING, &priv->state); dev_err(&priv->pdev->dev, "failed to rebuild after reset\n"); return ret; } netif_device_attach(priv->netdev); + clear_bit(HBG_NIC_STATE_RESETTING, &priv->state); dev_info(&priv->pdev->dev, "reset done\n"); return ret; } -/* must be protected by rtnl lock */ int hbg_reset(struct hbg_priv *priv) { int ret; - ASSERT_RTNL(); ret = hbg_reset_prepare(priv, HBG_RESET_TYPE_FUNCTION); if (ret) return ret; @@ -171,7 +169,6 @@ static void hbg_pci_err_reset_prepare(struct pci_dev *pdev) struct net_device *netdev = pci_get_drvdata(pdev); struct hbg_priv *priv = netdev_priv(netdev); - rtnl_lock(); hbg_reset_prepare(priv, HBG_RESET_TYPE_FLR); } @@ -181,7 +178,6 @@ static void hbg_pci_err_reset_done(struct pci_dev *pdev) struct hbg_priv *priv = netdev_priv(netdev); hbg_reset_done(priv, HBG_RESET_TYPE_FLR); - rtnl_unlock(); } static const struct pci_error_handlers hbg_pci_err_handler = { -- cgit v1.2.3 From 7004b26f0b64331143eb0b312e77a357a11427ce Mon Sep 17 00:00:00 2001 From: Jijie Shao Date: Wed, 6 Aug 2025 18:27:57 +0800 Subject: net: hibmcge: fix the division by zero issue When the network port is down, the queue is released, and ring->len is 0. In debugfs, hbg_get_queue_used_num() will be called, which may lead to a division by zero issue. This patch adds a check, if ring->len is 0, hbg_get_queue_used_num() directly returns 0. Fixes: 40735e7543f9 ("net: hibmcge: Implement .ndo_start_xmit function") Signed-off-by: Jijie Shao Reviewed-by: Simon Horman Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/hisilicon/hibmcge/hbg_txrx.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/hisilicon/hibmcge/hbg_txrx.h b/drivers/net/ethernet/hisilicon/hibmcge/hbg_txrx.h index 2883a5899ae2..8b6110599e10 100644 --- a/drivers/net/ethernet/hisilicon/hibmcge/hbg_txrx.h +++ b/drivers/net/ethernet/hisilicon/hibmcge/hbg_txrx.h @@ -29,7 +29,12 @@ static inline bool hbg_fifo_is_full(struct hbg_priv *priv, enum hbg_dir dir) static inline u32 hbg_get_queue_used_num(struct hbg_ring *ring) { - return (ring->ntu + ring->len - ring->ntc) % ring->len; + u32 len = READ_ONCE(ring->len); + + if (!len) + return 0; + + return (READ_ONCE(ring->ntu) + len - READ_ONCE(ring->ntc)) % len; } netdev_tx_t hbg_net_start_xmit(struct sk_buff *skb, struct net_device *netdev); -- cgit v1.2.3 From 62c50180ffda01468e640ac14925503796f255e2 Mon Sep 17 00:00:00 2001 From: Jijie Shao Date: Wed, 6 Aug 2025 18:27:58 +0800 Subject: net: hibmcge: fix the np_link_fail error reporting issue Currently, after modifying device port mode, the np_link_ok state is immediately checked. At this point, the device may not yet ready, leading to the querying of an intermediate state. This patch will poll to check if np_link is ok after modifying device port mode, and only report np_link_fail upon timeout. Fixes: e0306637e85d ("net: hibmcge: Add support for mac link exception handling feature") Signed-off-by: Jijie Shao Reviewed-by: Simon Horman Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/hisilicon/hibmcge/hbg_hw.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/hisilicon/hibmcge/hbg_hw.c b/drivers/net/ethernet/hisilicon/hibmcge/hbg_hw.c index 8cca8316ba40..d0aa0661ecd4 100644 --- a/drivers/net/ethernet/hisilicon/hibmcge/hbg_hw.c +++ b/drivers/net/ethernet/hisilicon/hibmcge/hbg_hw.c @@ -12,6 +12,8 @@ #define HBG_HW_EVENT_WAIT_TIMEOUT_US (2 * 1000 * 1000) #define HBG_HW_EVENT_WAIT_INTERVAL_US (10 * 1000) +#define HBG_MAC_LINK_WAIT_TIMEOUT_US (500 * 1000) +#define HBG_MAC_LINK_WAIT_INTERVAL_US (5 * 1000) /* little endian or big endian. * ctrl means packet description, data means skb packet data */ @@ -228,6 +230,9 @@ void hbg_hw_fill_buffer(struct hbg_priv *priv, u32 buffer_dma_addr) void hbg_hw_adjust_link(struct hbg_priv *priv, u32 speed, u32 duplex) { + u32 link_status; + int ret; + hbg_hw_mac_enable(priv, HBG_STATUS_DISABLE); hbg_reg_write_field(priv, HBG_REG_PORT_MODE_ADDR, @@ -239,8 +244,14 @@ void hbg_hw_adjust_link(struct hbg_priv *priv, u32 speed, u32 duplex) hbg_hw_mac_enable(priv, HBG_STATUS_ENABLE); - if (!hbg_reg_read_field(priv, HBG_REG_AN_NEG_STATE_ADDR, - HBG_REG_AN_NEG_STATE_NP_LINK_OK_B)) + /* wait MAC link up */ + ret = readl_poll_timeout(priv->io_base + HBG_REG_AN_NEG_STATE_ADDR, + link_status, + FIELD_GET(HBG_REG_AN_NEG_STATE_NP_LINK_OK_B, + link_status), + HBG_MAC_LINK_WAIT_INTERVAL_US, + HBG_MAC_LINK_WAIT_TIMEOUT_US); + if (ret) hbg_np_link_fail_task_schedule(priv); } -- cgit v1.2.3 From 06feac15406f4f66f4c0c6ea60b10d44775d4133 Mon Sep 17 00:00:00 2001 From: MD Danish Anwar Date: Tue, 5 Aug 2025 23:08:12 +0530 Subject: net: ti: icssg-prueth: Fix emac link speed handling When link settings are changed emac->speed is populated by emac_adjust_link(). The link speed and other settings are then written into the DRAM. However if both ports are brought down after this and brought up again or if the operating mode is changed and a firmware reload is needed, the DRAM is cleared by icssg_config(). As a result the link settings are lost. Fix this by calling emac_adjust_link() after icssg_config(). This re populates the settings in the DRAM after a new firmware load. Fixes: 9facce84f406 ("net: ti: icssg-prueth: Fix firmware load sequence.") Signed-off-by: MD Danish Anwar Reviewed-by: Andrew Lunn Message-ID: <20250805173812.2183161-1-danishanwar@ti.com> Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/ti/icssg/icssg_prueth.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.c b/drivers/net/ethernet/ti/icssg/icssg_prueth.c index 2b973d6e2341..6c7d776ae4ee 100644 --- a/drivers/net/ethernet/ti/icssg/icssg_prueth.c +++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.c @@ -50,6 +50,8 @@ /* CTRLMMR_ICSSG_RGMII_CTRL register bits */ #define ICSSG_CTRL_RGMII_ID_MODE BIT(24) +static void emac_adjust_link(struct net_device *ndev); + static int emac_get_tx_ts(struct prueth_emac *emac, struct emac_tx_ts_response *rsp) { @@ -229,6 +231,10 @@ static int prueth_emac_common_start(struct prueth *prueth) ret = icssg_config(prueth, emac, slice); if (ret) goto disable_class; + + mutex_lock(&emac->ndev->phydev->lock); + emac_adjust_link(emac->ndev); + mutex_unlock(&emac->ndev->phydev->lock); } ret = prueth_emac_start(prueth); -- cgit v1.2.3 From 64fdaa94bfe0cca3a0f4b2dd922486c5f59fe678 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Mon, 4 Aug 2025 17:36:54 -0700 Subject: net: page_pool: allow enabling recycling late, fix false positive warning Page pool can have pages "directly" (locklessly) recycled to it, if the NAPI that owns the page pool is scheduled to run on the same CPU. To make this safe we check that the NAPI is disabled while we destroy the page pool. In most cases NAPI and page pool lifetimes are tied together so this happens naturally. The queue API expects the following order of calls: -> mem_alloc alloc new pp -> stop napi_disable -> start napi_enable -> mem_free free old pp Here we allocate the page pool in ->mem_alloc and free in ->mem_free. But the NAPIs are only stopped between ->stop and ->start. We created page_pool_disable_direct_recycling() to safely shut down the recycling in ->stop. This way the page_pool_destroy() call in ->mem_free doesn't have to worry about recycling any more. Unfortunately, the page_pool_disable_direct_recycling() is not enough to deal with failures which necessitate freeing the _new_ page pool. If we hit a failure in ->mem_alloc or ->stop the new page pool has to be freed while the NAPI is active (assuming driver attaches the page pool to an existing NAPI instance and doesn't reallocate NAPIs). Freeing the new page pool is technically safe because it hasn't been used for any packets, yet, so there can be no recycling. But the check in napi_assert_will_not_race() has no way of knowing that. We could check if page pool is empty but that'd make the check much less likely to trigger during development. Add page_pool_enable_direct_recycling(), pairing with page_pool_disable_direct_recycling(). It will allow us to create the new page pools in "disabled" state and only enable recycling when we know the reconfig operation will not fail. Coincidentally it will also let us re-enable the recycling for the old pool, if the reconfig failed: -> mem_alloc (new) -> stop (old) # disables direct recycling for old -> start (new) # fail!! -> start (old) # go back to old pp but direct recycling is lost :( -> mem_free (new) The new helper is idempotent to make the life easier for drivers, which can operate in HDS mode and support zero-copy Rx. The driver can call the helper twice whether there are two pools or it has multiple references to a single pool. Fixes: 40eca00ae605 ("bnxt_en: unlink page pool when stopping Rx queue") Tested-by: David Wei Link: https://patch.msgid.link/20250805003654.2944974-1-kuba@kernel.org Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 5578ddcb465d..76a4c5ae8000 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -3819,7 +3819,6 @@ static int bnxt_alloc_rx_page_pool(struct bnxt *bp, if (BNXT_RX_PAGE_MODE(bp)) pp.pool_size += bp->rx_ring_size / rx_size_fac; pp.nid = numa_node; - pp.napi = &rxr->bnapi->napi; pp.netdev = bp->dev; pp.dev = &bp->pdev->dev; pp.dma_dir = bp->rx_dir; @@ -3851,6 +3850,12 @@ err_destroy_pp: return PTR_ERR(pool); } +static void bnxt_enable_rx_page_pool(struct bnxt_rx_ring_info *rxr) +{ + page_pool_enable_direct_recycling(rxr->head_pool, &rxr->bnapi->napi); + page_pool_enable_direct_recycling(rxr->page_pool, &rxr->bnapi->napi); +} + static int bnxt_alloc_rx_agg_bmap(struct bnxt *bp, struct bnxt_rx_ring_info *rxr) { u16 mem_size; @@ -3889,6 +3894,7 @@ static int bnxt_alloc_rx_rings(struct bnxt *bp) rc = bnxt_alloc_rx_page_pool(bp, rxr, cpu_node); if (rc) return rc; + bnxt_enable_rx_page_pool(rxr); rc = xdp_rxq_info_reg(&rxr->xdp_rxq, bp->dev, i, 0); if (rc < 0) @@ -16031,6 +16037,7 @@ static int bnxt_queue_start(struct net_device *dev, void *qmem, int idx) goto err_reset; } + bnxt_enable_rx_page_pool(rxr); napi_enable_locked(&bnapi->napi); bnxt_db_nq_arm(bp, &cpr->cp_db, cpr->cp_raw_cons); -- cgit v1.2.3 From 5f1d1d14db7dabce9c815e7d7cd351f8d58b8585 Mon Sep 17 00:00:00 2001 From: Alok Tiwari Date: Tue, 5 Aug 2025 07:23:18 -0700 Subject: net: ti: icss-iep: Fix incorrect type for return value in extts_enable() The variable ret in icss_iep_extts_enable() was incorrectly declared as u32, while the function returns int and may return negative error codes. This will cause sign extension issues and incorrect error propagation. Update ret to be int to fix error handling. This change corrects the declaration to avoid potential type mismatch. Fixes: c1e0230eeaab ("net: ti: icss-iep: Add IEP driver") Signed-off-by: Alok Tiwari Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/20250805142323.1949406-1-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/ti/icssg/icss_iep.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ti/icssg/icss_iep.c b/drivers/net/ethernet/ti/icssg/icss_iep.c index 50bfbc2779e4..d8c9fe1d98c4 100644 --- a/drivers/net/ethernet/ti/icssg/icss_iep.c +++ b/drivers/net/ethernet/ti/icssg/icss_iep.c @@ -621,7 +621,8 @@ exit: static int icss_iep_extts_enable(struct icss_iep *iep, u32 index, int on) { - u32 val, cap, ret = 0; + u32 val, cap; + int ret = 0; mutex_lock(&iep->ptp_clk_mutex); -- cgit v1.2.3 From 829f45f9d992019b49f08ab425ca11288b084aed Mon Sep 17 00:00:00 2001 From: Tristram Ha Date: Wed, 6 Aug 2025 17:54:53 -0700 Subject: net: dsa: microchip: Fix KSZ8863 reset problem ksz8873_valid_regs[] was added for register access for KSZ8863/KSZ8873 switches, but the reset register is not in the list so ksz8_reset_switch() does not take any effect. Replace regmap_update_bits() using ksz_regmap_8 with ksz_rmw8() so that an error message will be given if the register is not defined. A side effect of not resetting the switch is the static MAC table is not cleared. Further additions to the table will show write error as there are only 8 entries in the table. Fixes: d0dec3333040 ("net: dsa: microchip: Add register access control for KSZ8873 chip") Signed-off-by: Tristram Ha Reviewed-by: Oleksij Rempel Link: https://patch.msgid.link/20250807005453.8306-1-Tristram.Ha@microchip.com Signed-off-by: Jakub Kicinski --- drivers/net/dsa/microchip/ksz8.c | 20 +++++++++++--------- drivers/net/dsa/microchip/ksz_common.c | 1 + 2 files changed, 12 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/dsa/microchip/ksz8.c b/drivers/net/dsa/microchip/ksz8.c index 76e490070e9c..c354abdafc1b 100644 --- a/drivers/net/dsa/microchip/ksz8.c +++ b/drivers/net/dsa/microchip/ksz8.c @@ -36,15 +36,14 @@ static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set) { - regmap_update_bits(ksz_regmap_8(dev), addr, bits, set ? bits : 0); + ksz_rmw8(dev, addr, bits, set ? bits : 0); } static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits, bool set) { - regmap_update_bits(ksz_regmap_8(dev), - dev->dev_ops->get_port_addr(port, offset), - bits, set ? bits : 0); + ksz_rmw8(dev, dev->dev_ops->get_port_addr(port, offset), bits, + set ? bits : 0); } /** @@ -1955,16 +1954,19 @@ int ksz8_setup(struct dsa_switch *ds) ksz_cfg(dev, S_LINK_AGING_CTRL, SW_LINK_AUTO_AGING, true); /* Enable aggressive back off algorithm in half duplex mode. */ - regmap_update_bits(ksz_regmap_8(dev), REG_SW_CTRL_1, - SW_AGGR_BACKOFF, SW_AGGR_BACKOFF); + ret = ksz_rmw8(dev, REG_SW_CTRL_1, SW_AGGR_BACKOFF, SW_AGGR_BACKOFF); + if (ret) + return ret; /* * Make sure unicast VLAN boundary is set as default and * enable no excessive collision drop. */ - regmap_update_bits(ksz_regmap_8(dev), REG_SW_CTRL_2, - UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP, - UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP); + ret = ksz_rmw8(dev, REG_SW_CTRL_2, + UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP, + UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP); + if (ret) + return ret; ksz_cfg(dev, S_REPLACE_VID_CTRL, SW_REPLACE_VID, false); diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index 7292bfe2f7ca..4cb14288ff0f 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -1447,6 +1447,7 @@ static const struct regmap_range ksz8873_valid_regs[] = { regmap_reg_range(0x3f, 0x3f), /* advanced control registers */ + regmap_reg_range(0x43, 0x43), regmap_reg_range(0x60, 0x6f), regmap_reg_range(0x70, 0x75), regmap_reg_range(0x76, 0x78), -- cgit v1.2.3 From 53898ebabe843bfa7baea9dae152797d5d0563c9 Mon Sep 17 00:00:00 2001 From: Stanislav Fomichev Date: Wed, 6 Aug 2025 14:37:25 -0700 Subject: net: lapbether: ignore ops-locked netdevs Syzkaller managed to trigger lock dependency in xsk_notify via register_netdevice. As discussed in [0], using register_netdevice in the notifiers is problematic so skip adding lapbeth for ops-locked devices. xsk_notifier+0xa4/0x280 net/xdp/xsk.c:1645 notifier_call_chain+0xbc/0x410 kernel/notifier.c:85 call_netdevice_notifiers_info+0xbe/0x140 net/core/dev.c:2230 call_netdevice_notifiers_extack net/core/dev.c:2268 [inline] call_netdevice_notifiers net/core/dev.c:2282 [inline] unregister_netdevice_many_notify+0xf9d/0x2700 net/core/dev.c:12077 unregister_netdevice_many net/core/dev.c:12140 [inline] unregister_netdevice_queue+0x305/0x3f0 net/core/dev.c:11984 register_netdevice+0x18f1/0x2270 net/core/dev.c:11149 lapbeth_new_device drivers/net/wan/lapbether.c:420 [inline] lapbeth_device_event+0x5b1/0xbe0 drivers/net/wan/lapbether.c:462 notifier_call_chain+0xbc/0x410 kernel/notifier.c:85 call_netdevice_notifiers_info+0xbe/0x140 net/core/dev.c:2230 call_netdevice_notifiers_extack net/core/dev.c:2268 [inline] call_netdevice_notifiers net/core/dev.c:2282 [inline] __dev_notify_flags+0x12c/0x2e0 net/core/dev.c:9497 netif_change_flags+0x108/0x160 net/core/dev.c:9526 dev_change_flags+0xba/0x250 net/core/dev_api.c:68 devinet_ioctl+0x11d5/0x1f50 net/ipv4/devinet.c:1200 inet_ioctl+0x3a7/0x3f0 net/ipv4/af_inet.c:1001 0: https://lore.kernel.org/netdev/20250625140357.6203d0af@kernel.org/ Fixes: 4c975fd70002 ("net: hold instance lock during NETDEV_REGISTER/UP") Suggested-by: Jakub Kicinski Reported-by: syzbot+e67ea9c235b13b4f0020@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=e67ea9c235b13b4f0020 Signed-off-by: Stanislav Fomichev Link: https://patch.msgid.link/20250806213726.1383379-1-sdf@fomichev.me Signed-off-by: Jakub Kicinski --- drivers/net/wan/lapbether.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c index 995a7207bdf8..f357a7ac70ac 100644 --- a/drivers/net/wan/lapbether.c +++ b/drivers/net/wan/lapbether.c @@ -81,7 +81,7 @@ static struct lapbethdev *lapbeth_get_x25_dev(struct net_device *dev) static __inline__ int dev_is_ethdev(struct net_device *dev) { - return dev->type == ARPHRD_ETHER && strncmp(dev->name, "dummy", 5); + return dev->type == ARPHRD_ETHER && !netdev_need_ops_lock(dev); } /* ------------------------------------------------------------------------ */ -- cgit v1.2.3 From c64237960819aee1766d03f446ae6de94b1e3f73 Mon Sep 17 00:00:00 2001 From: Stanislav Fomichev Date: Wed, 6 Aug 2025 14:37:26 -0700 Subject: hamradio: ignore ops-locked netdevs Syzkaller managed to trigger lock dependency in xsk_notify via register_netdevice. As discussed in [0], using register_netdevice in the notifiers is problematic so skip adding hamradio for ops-locked devices. xsk_notifier+0x89/0x230 net/xdp/xsk.c:1664 notifier_call_chain+0x1b6/0x3e0 kernel/notifier.c:85 call_netdevice_notifiers_extack net/core/dev.c:2267 [inline] call_netdevice_notifiers net/core/dev.c:2281 [inline] unregister_netdevice_many_notify+0x14d7/0x1ff0 net/core/dev.c:12156 unregister_netdevice_many net/core/dev.c:12219 [inline] unregister_netdevice_queue+0x33c/0x380 net/core/dev.c:12063 register_netdevice+0x1689/0x1ae0 net/core/dev.c:11241 bpq_new_device drivers/net/hamradio/bpqether.c:481 [inline] bpq_device_event+0x491/0x600 drivers/net/hamradio/bpqether.c:523 notifier_call_chain+0x1b6/0x3e0 kernel/notifier.c:85 call_netdevice_notifiers_extack net/core/dev.c:2267 [inline] call_netdevice_notifiers net/core/dev.c:2281 [inline] __dev_notify_flags+0x18d/0x2e0 net/core/dev.c:-1 netif_change_flags+0xe8/0x1a0 net/core/dev.c:9608 dev_change_flags+0x130/0x260 net/core/dev_api.c:68 devinet_ioctl+0xbb4/0x1b50 net/ipv4/devinet.c:1200 inet_ioctl+0x3c0/0x4c0 net/ipv4/af_inet.c:1001 0: https://lore.kernel.org/netdev/20250625140357.6203d0af@kernel.org/ Fixes: 4c975fd70002 ("net: hold instance lock during NETDEV_REGISTER/UP") Suggested-by: Jakub Kicinski Reported-by: syzbot+e6300f66a999a6612477@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=e6300f66a999a6612477 Signed-off-by: Stanislav Fomichev Link: https://patch.msgid.link/20250806213726.1383379-2-sdf@fomichev.me Signed-off-by: Jakub Kicinski --- drivers/net/hamradio/bpqether.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/hamradio/bpqether.c b/drivers/net/hamradio/bpqether.c index 0e0fe32d2da4..045c5177262e 100644 --- a/drivers/net/hamradio/bpqether.c +++ b/drivers/net/hamradio/bpqether.c @@ -138,7 +138,7 @@ static inline struct net_device *bpq_get_ax25_dev(struct net_device *dev) static inline int dev_is_ethdev(struct net_device *dev) { - return dev->type == ARPHRD_ETHER && strncmp(dev->name, "dummy", 5); + return dev->type == ARPHRD_ETHER && !netdev_need_ops_lock(dev); } /* ------------------------------------------------------------------------ */ -- cgit v1.2.3 From 33caa208dba6fa639e8a92fd0c8320b652e5550c Mon Sep 17 00:00:00 2001 From: Haiyang Zhang Date: Wed, 6 Aug 2025 13:21:51 -0700 Subject: hv_netvsc: Fix panic during namespace deletion with VF The existing code move the VF NIC to new namespace when NETDEV_REGISTER is received on netvsc NIC. During deletion of the namespace, default_device_exit_batch() >> default_device_exit_net() is called. When netvsc NIC is moved back and registered to the default namespace, it automatically brings VF NIC back to the default namespace. This will cause the default_device_exit_net() >> for_each_netdev_safe loop unable to detect the list end, and hit NULL ptr: [ 231.449420] mana 7870:00:00.0 enP30832s1: Moved VF to namespace with: eth0 [ 231.449656] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ 231.450246] #PF: supervisor read access in kernel mode [ 231.450579] #PF: error_code(0x0000) - not-present page [ 231.450916] PGD 17b8a8067 P4D 0 [ 231.451163] Oops: Oops: 0000 [#1] SMP NOPTI [ 231.451450] CPU: 82 UID: 0 PID: 1394 Comm: kworker/u768:1 Not tainted 6.16.0-rc4+ #3 VOLUNTARY [ 231.452042] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 11/21/2024 [ 231.452692] Workqueue: netns cleanup_net [ 231.452947] RIP: 0010:default_device_exit_batch+0x16c/0x3f0 [ 231.453326] Code: c0 0c f5 b3 e8 d5 db fe ff 48 85 c0 74 15 48 c7 c2 f8 fd ca b2 be 10 00 00 00 48 8d 7d c0 e8 7b 77 25 00 49 8b 86 28 01 00 00 <48> 8b 50 10 4c 8b 2a 4c 8d 62 f0 49 83 ed 10 4c 39 e0 0f 84 d6 00 [ 231.454294] RSP: 0018:ff75fc7c9bf9fd00 EFLAGS: 00010246 [ 231.454610] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 61c8864680b583eb [ 231.455094] RDX: ff1fa9f71462d800 RSI: ff75fc7c9bf9fd38 RDI: 0000000030766564 [ 231.455686] RBP: ff75fc7c9bf9fd78 R08: 0000000000000000 R09: 0000000000000000 [ 231.456126] R10: 0000000000000001 R11: 0000000000000004 R12: ff1fa9f70088e340 [ 231.456621] R13: ff1fa9f70088e340 R14: ffffffffb3f50c20 R15: ff1fa9f7103e6340 [ 231.457161] FS: 0000000000000000(0000) GS:ff1faa6783a08000(0000) knlGS:0000000000000000 [ 231.457707] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 231.458031] CR2: 0000000000000010 CR3: 0000000179ab2006 CR4: 0000000000b73ef0 [ 231.458434] Call Trace: [ 231.458600] [ 231.458777] ops_undo_list+0x100/0x220 [ 231.459015] cleanup_net+0x1b8/0x300 [ 231.459285] process_one_work+0x184/0x340 To fix it, move the ns change to a workqueue, and take rtnl_lock to avoid changing the netdev list when default_device_exit_net() is using it. Cc: stable@vger.kernel.org Fixes: 4c262801ea60 ("hv_netvsc: Fix VF namespace also in synthetic NIC NETDEV_REGISTER event") Signed-off-by: Haiyang Zhang Link: https://patch.msgid.link/1754511711-11188-1-git-send-email-haiyangz@linux.microsoft.com Signed-off-by: Jakub Kicinski --- drivers/net/hyperv/hyperv_net.h | 3 +++ drivers/net/hyperv/netvsc_drv.c | 29 ++++++++++++++++++++++++++++- 2 files changed, 31 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/hyperv/hyperv_net.h b/drivers/net/hyperv/hyperv_net.h index cb6f5482d203..7397c693f984 100644 --- a/drivers/net/hyperv/hyperv_net.h +++ b/drivers/net/hyperv/hyperv_net.h @@ -1061,6 +1061,7 @@ struct net_device_context { struct net_device __rcu *vf_netdev; struct netvsc_vf_pcpu_stats __percpu *vf_stats; struct delayed_work vf_takeover; + struct delayed_work vfns_work; /* 1: allocated, serial number is valid. 0: not allocated */ u32 vf_alloc; @@ -1075,6 +1076,8 @@ struct net_device_context { struct netvsc_device_info *saved_netvsc_dev_info; }; +void netvsc_vfns_work(struct work_struct *w); + /* Azure hosts don't support non-TCP port numbers in hashing for fragmented * packets. We can use ethtool to change UDP hash level when necessary. */ diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c index f44753756358..39c892e46cb0 100644 --- a/drivers/net/hyperv/netvsc_drv.c +++ b/drivers/net/hyperv/netvsc_drv.c @@ -2522,6 +2522,7 @@ static int netvsc_probe(struct hv_device *dev, spin_lock_init(&net_device_ctx->lock); INIT_LIST_HEAD(&net_device_ctx->reconfig_events); INIT_DELAYED_WORK(&net_device_ctx->vf_takeover, netvsc_vf_setup); + INIT_DELAYED_WORK(&net_device_ctx->vfns_work, netvsc_vfns_work); net_device_ctx->vf_stats = netdev_alloc_pcpu_stats(struct netvsc_vf_pcpu_stats); @@ -2666,6 +2667,8 @@ static void netvsc_remove(struct hv_device *dev) cancel_delayed_work_sync(&ndev_ctx->dwork); rtnl_lock(); + cancel_delayed_work_sync(&ndev_ctx->vfns_work); + nvdev = rtnl_dereference(ndev_ctx->nvdev); if (nvdev) { cancel_work_sync(&nvdev->subchan_work); @@ -2707,6 +2710,7 @@ static int netvsc_suspend(struct hv_device *dev) cancel_delayed_work_sync(&ndev_ctx->dwork); rtnl_lock(); + cancel_delayed_work_sync(&ndev_ctx->vfns_work); nvdev = rtnl_dereference(ndev_ctx->nvdev); if (nvdev == NULL) { @@ -2800,6 +2804,27 @@ static void netvsc_event_set_vf_ns(struct net_device *ndev) } } +void netvsc_vfns_work(struct work_struct *w) +{ + struct net_device_context *ndev_ctx = + container_of(w, struct net_device_context, vfns_work.work); + struct net_device *ndev; + + if (!rtnl_trylock()) { + schedule_delayed_work(&ndev_ctx->vfns_work, 1); + return; + } + + ndev = hv_get_drvdata(ndev_ctx->device_ctx); + if (!ndev) + goto out; + + netvsc_event_set_vf_ns(ndev); + +out: + rtnl_unlock(); +} + /* * On Hyper-V, every VF interface is matched with a corresponding * synthetic interface. The synthetic interface is presented first @@ -2810,10 +2835,12 @@ static int netvsc_netdev_event(struct notifier_block *this, unsigned long event, void *ptr) { struct net_device *event_dev = netdev_notifier_info_to_dev(ptr); + struct net_device_context *ndev_ctx; int ret = 0; if (event_dev->netdev_ops == &device_ops && event == NETDEV_REGISTER) { - netvsc_event_set_vf_ns(event_dev); + ndev_ctx = netdev_priv(event_dev); + schedule_delayed_work(&ndev_ctx->vfns_work, 0); return NOTIFY_DONE; } -- cgit v1.2.3 From b6bcbce3359619d05bf387d4f5cc3af63668dbaa Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Thu, 31 Jul 2025 13:18:32 +0100 Subject: soc/tegra: pmc: Ensure power-domains are in a known state After commit 13a4b7fb6260 ("pmdomain: core: Leave powered-on genpds on until late_initcall_sync") was applied, the Tegra210 Jetson TX1 board failed to boot. Looking into this issue, before this commit was applied, if any of the Tegra power-domains were in 'on' state when the kernel booted, they were being turned off by the genpd core before any driver had chance to request them. This was purely by luck and a consequence of the power-domains being turned off earlier during boot. After this commit was applied, any power-domains in the 'on' state are kept on for longer during boot and therefore, may never transitioned to the off state before they are requested/used. The hang on the Tegra210 Jetson TX1 is caused because devices in some power-domains are accessed without the power-domain being turned off and on, indicating that the power-domain is not in a completely on state. >From reviewing the Tegra PMC driver code, if a power-domain is in the 'on' state there is no guarantee that all the necessary clocks associated with the power-domain are on and even if they are they would not have been requested via the clock framework and so could be turned off later. Some power-domains also have a 'clamping' register that needs to be configured as well. In short, if a power-domain is already 'on' it is difficult to know if it has been configured correctly. Given that the power-domains happened to be switched off during boot previously, to ensure that they are in a good known state on boot, fix this by switching off any power-domains that are on initially when registering the power-domains with the genpd framework. Note that commit 05cfb988a4d0 ("soc/tegra: pmc: Initialise resets associated with a power partition") updated the tegra_powergate_of_get_resets() function to pass the 'off' to ensure that the resets for the power-domain are in the correct state on boot. However, now that we may power off a domain on boot, if it is on, it is better to move this logic into the tegra_powergate_add() function so that there is a single place where we are handling the initial state of the power-domain. Fixes: a38045121bf4 ("soc/tegra: pmc: Add generic PM domain support") Signed-off-by: Jon Hunter Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250731121832.213671-1-jonathanh@nvidia.com Signed-off-by: Ulf Hansson --- drivers/soc/tegra/pmc.c | 51 ++++++++++++++++++++++++++++--------------------- 1 file changed, 29 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c index 2a5f24ee858c..034a2a535a1e 100644 --- a/drivers/soc/tegra/pmc.c +++ b/drivers/soc/tegra/pmc.c @@ -1232,7 +1232,7 @@ err: } static int tegra_powergate_of_get_resets(struct tegra_powergate *pg, - struct device_node *np, bool off) + struct device_node *np) { struct device *dev = pg->pmc->dev; int err; @@ -1247,22 +1247,6 @@ static int tegra_powergate_of_get_resets(struct tegra_powergate *pg, err = reset_control_acquire(pg->reset); if (err < 0) { pr_err("failed to acquire resets: %d\n", err); - goto out; - } - - if (off) { - err = reset_control_assert(pg->reset); - } else { - err = reset_control_deassert(pg->reset); - if (err < 0) - goto out; - - reset_control_release(pg->reset); - } - -out: - if (err) { - reset_control_release(pg->reset); reset_control_put(pg->reset); } @@ -1308,20 +1292,43 @@ static int tegra_powergate_add(struct tegra_pmc *pmc, struct device_node *np) goto set_available; } - err = tegra_powergate_of_get_resets(pg, np, off); + err = tegra_powergate_of_get_resets(pg, np); if (err < 0) { dev_err(dev, "failed to get resets for %pOFn: %d\n", np, err); goto remove_clks; } - if (!IS_ENABLED(CONFIG_PM_GENERIC_DOMAINS)) { - if (off) - WARN_ON(tegra_powergate_power_up(pg, true)); + /* + * If the power-domain is off, then ensure the resets are asserted. + * If the power-domain is on, then power down to ensure that when is + * it turned on the power-domain, clocks and resets are all in the + * expected state. + */ + if (off) { + err = reset_control_assert(pg->reset); + if (err) { + pr_err("failed to assert resets: %d\n", err); + goto remove_resets; + } + } else { + err = tegra_powergate_power_down(pg); + if (err) { + dev_err(dev, "failed to turn off PM domain %s: %d\n", + pg->genpd.name, err); + goto remove_resets; + } + } + /* + * If PM_GENERIC_DOMAINS is not enabled, power-on + * the domain and skip the genpd registration. + */ + if (!IS_ENABLED(CONFIG_PM_GENERIC_DOMAINS)) { + WARN_ON(tegra_powergate_power_up(pg, true)); goto remove_resets; } - err = pm_genpd_init(&pg->genpd, NULL, off); + err = pm_genpd_init(&pg->genpd, NULL, true); if (err < 0) { dev_err(dev, "failed to initialise PM domain %pOFn: %d\n", np, err); -- cgit v1.2.3 From d5dd409812eca084e68208926bb629c8f708651f Mon Sep 17 00:00:00 2001 From: Philipp Reisner Date: Thu, 5 Jun 2025 12:38:52 +0200 Subject: drbd: Remove the open-coded page pool MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If the network stack keeps a reference for too long, DRBD keeps references on a higher number of pages as a consequence. Fix all that by no longer relying on page reference counts dropping to an expected value. Instead, DRBD gives up its reference and lets the system handle everything else. While at it, remove the open-coded custom page pool mechanism and use the page_pool included in the kernel. Signed-off-by: Philipp Reisner Signed-off-by: Christoph Böhmwalder Tested-by: Eric Hagberg Link: https://lore.kernel.org/r/20250605103852.23029-1-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe --- drivers/block/drbd/drbd_int.h | 39 +----- drivers/block/drbd/drbd_main.c | 59 +++------ drivers/block/drbd/drbd_receiver.c | 264 +++++-------------------------------- drivers/block/drbd/drbd_worker.c | 56 +++----- 4 files changed, 71 insertions(+), 347 deletions(-) (limited to 'drivers') diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h index e21492981f7d..f6d6276974ee 100644 --- a/drivers/block/drbd/drbd_int.h +++ b/drivers/block/drbd/drbd_int.h @@ -380,6 +380,9 @@ enum { /* this is/was a write request */ __EE_WRITE, + /* hand back using mempool_free(e, drbd_buffer_page_pool) */ + __EE_RELEASE_TO_MEMPOOL, + /* this is/was a write same request */ __EE_WRITE_SAME, @@ -402,6 +405,7 @@ enum { #define EE_IN_INTERVAL_TREE (1<<__EE_IN_INTERVAL_TREE) #define EE_SUBMITTED (1<<__EE_SUBMITTED) #define EE_WRITE (1<<__EE_WRITE) +#define EE_RELEASE_TO_MEMPOOL (1<<__EE_RELEASE_TO_MEMPOOL) #define EE_WRITE_SAME (1<<__EE_WRITE_SAME) #define EE_APPLICATION (1<<__EE_APPLICATION) #define EE_RS_THIN_REQ (1<<__EE_RS_THIN_REQ) @@ -858,7 +862,6 @@ struct drbd_device { struct list_head sync_ee; /* IO in progress (P_RS_DATA_REPLY gets written to disk) */ struct list_head done_ee; /* need to send P_WRITE_ACK */ struct list_head read_ee; /* [RS]P_DATA_REQUEST being read */ - struct list_head net_ee; /* zero-copy network send in progress */ struct list_head resync_reads; atomic_t pp_in_use; /* allocated from page pool */ @@ -1329,24 +1332,6 @@ extern struct kmem_cache *drbd_al_ext_cache; /* activity log extents */ extern mempool_t drbd_request_mempool; extern mempool_t drbd_ee_mempool; -/* drbd's page pool, used to buffer data received from the peer, - * or data requested by the peer. - * - * This does not have an emergency reserve. - * - * When allocating from this pool, it first takes pages from the pool. - * Only if the pool is depleted will try to allocate from the system. - * - * The assumption is that pages taken from this pool will be processed, - * and given back, "quickly", and then can be recycled, so we can avoid - * frequent calls to alloc_page(), and still will be able to make progress even - * under memory pressure. - */ -extern struct page *drbd_pp_pool; -extern spinlock_t drbd_pp_lock; -extern int drbd_pp_vacant; -extern wait_queue_head_t drbd_pp_wait; - /* We also need a standard (emergency-reserve backed) page pool * for meta data IO (activity log, bitmap). * We can keep it global, as long as it is used as "N pages at a time". @@ -1354,6 +1339,7 @@ extern wait_queue_head_t drbd_pp_wait; */ #define DRBD_MIN_POOL_PAGES 128 extern mempool_t drbd_md_io_page_pool; +extern mempool_t drbd_buffer_page_pool; /* We also need to make sure we get a bio * when we need it for housekeeping purposes */ @@ -1488,10 +1474,7 @@ extern struct drbd_peer_request *drbd_alloc_peer_req(struct drbd_peer_device *, sector_t, unsigned int, unsigned int, gfp_t) __must_hold(local); -extern void __drbd_free_peer_req(struct drbd_device *, struct drbd_peer_request *, - int); -#define drbd_free_peer_req(m,e) __drbd_free_peer_req(m, e, 0) -#define drbd_free_net_peer_req(m,e) __drbd_free_peer_req(m, e, 1) +extern void drbd_free_peer_req(struct drbd_device *device, struct drbd_peer_request *req); extern struct page *drbd_alloc_pages(struct drbd_peer_device *, unsigned int, bool); extern void _drbd_clear_done_ee(struct drbd_device *device, struct list_head *to_be_freed); extern int drbd_connected(struct drbd_peer_device *); @@ -1610,16 +1593,6 @@ static inline struct page *page_chain_next(struct page *page) for (; page && ({ n = page_chain_next(page); 1; }); page = n) -static inline int drbd_peer_req_has_active_page(struct drbd_peer_request *peer_req) -{ - struct page *page = peer_req->pages; - page_chain_for_each(page) { - if (page_count(page) > 1) - return 1; - } - return 0; -} - static inline union drbd_state drbd_read_state(struct drbd_device *device) { struct drbd_resource *resource = device->resource; diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c index 52724b79be30..c73376886e7a 100644 --- a/drivers/block/drbd/drbd_main.c +++ b/drivers/block/drbd/drbd_main.c @@ -114,20 +114,10 @@ struct kmem_cache *drbd_al_ext_cache; /* activity log extents */ mempool_t drbd_request_mempool; mempool_t drbd_ee_mempool; mempool_t drbd_md_io_page_pool; +mempool_t drbd_buffer_page_pool; struct bio_set drbd_md_io_bio_set; struct bio_set drbd_io_bio_set; -/* I do not use a standard mempool, because: - 1) I want to hand out the pre-allocated objects first. - 2) I want to be able to interrupt sleeping allocation with a signal. - Note: This is a single linked list, the next pointer is the private - member of struct page. - */ -struct page *drbd_pp_pool; -DEFINE_SPINLOCK(drbd_pp_lock); -int drbd_pp_vacant; -wait_queue_head_t drbd_pp_wait; - DEFINE_RATELIMIT_STATE(drbd_ratelimit_state, 5 * HZ, 5); static const struct block_device_operations drbd_ops = { @@ -1611,6 +1601,7 @@ static int _drbd_send_zc_bio(struct drbd_peer_device *peer_device, struct bio *b static int _drbd_send_zc_ee(struct drbd_peer_device *peer_device, struct drbd_peer_request *peer_req) { + bool use_sendpage = !(peer_req->flags & EE_RELEASE_TO_MEMPOOL); struct page *page = peer_req->pages; unsigned len = peer_req->i.size; int err; @@ -1619,8 +1610,13 @@ static int _drbd_send_zc_ee(struct drbd_peer_device *peer_device, page_chain_for_each(page) { unsigned l = min_t(unsigned, len, PAGE_SIZE); - err = _drbd_send_page(peer_device, page, 0, l, - page_chain_next(page) ? MSG_MORE : 0); + if (likely(use_sendpage)) + err = _drbd_send_page(peer_device, page, 0, l, + page_chain_next(page) ? MSG_MORE : 0); + else + err = _drbd_no_send_page(peer_device, page, 0, l, + page_chain_next(page) ? MSG_MORE : 0); + if (err) return err; len -= l; @@ -1962,7 +1958,6 @@ void drbd_init_set_defaults(struct drbd_device *device) INIT_LIST_HEAD(&device->sync_ee); INIT_LIST_HEAD(&device->done_ee); INIT_LIST_HEAD(&device->read_ee); - INIT_LIST_HEAD(&device->net_ee); INIT_LIST_HEAD(&device->resync_reads); INIT_LIST_HEAD(&device->resync_work.list); INIT_LIST_HEAD(&device->unplug_work.list); @@ -2043,7 +2038,6 @@ void drbd_device_cleanup(struct drbd_device *device) D_ASSERT(device, list_empty(&device->sync_ee)); D_ASSERT(device, list_empty(&device->done_ee)); D_ASSERT(device, list_empty(&device->read_ee)); - D_ASSERT(device, list_empty(&device->net_ee)); D_ASSERT(device, list_empty(&device->resync_reads)); D_ASSERT(device, list_empty(&first_peer_device(device)->connection->sender_work.q)); D_ASSERT(device, list_empty(&device->resync_work.list)); @@ -2055,19 +2049,11 @@ void drbd_device_cleanup(struct drbd_device *device) static void drbd_destroy_mempools(void) { - struct page *page; - - while (drbd_pp_pool) { - page = drbd_pp_pool; - drbd_pp_pool = (struct page *)page_private(page); - __free_page(page); - drbd_pp_vacant--; - } - /* D_ASSERT(device, atomic_read(&drbd_pp_vacant)==0); */ bioset_exit(&drbd_io_bio_set); bioset_exit(&drbd_md_io_bio_set); + mempool_exit(&drbd_buffer_page_pool); mempool_exit(&drbd_md_io_page_pool); mempool_exit(&drbd_ee_mempool); mempool_exit(&drbd_request_mempool); @@ -2086,9 +2072,8 @@ static void drbd_destroy_mempools(void) static int drbd_create_mempools(void) { - struct page *page; const int number = (DRBD_MAX_BIO_SIZE/PAGE_SIZE) * drbd_minor_count; - int i, ret; + int ret; /* caches */ drbd_request_cache = kmem_cache_create( @@ -2125,6 +2110,10 @@ static int drbd_create_mempools(void) if (ret) goto Enomem; + ret = mempool_init_page_pool(&drbd_buffer_page_pool, number, 0); + if (ret) + goto Enomem; + ret = mempool_init_slab_pool(&drbd_request_mempool, number, drbd_request_cache); if (ret) @@ -2134,15 +2123,6 @@ static int drbd_create_mempools(void) if (ret) goto Enomem; - for (i = 0; i < number; i++) { - page = alloc_page(GFP_HIGHUSER); - if (!page) - goto Enomem; - set_page_private(page, (unsigned long)drbd_pp_pool); - drbd_pp_pool = page; - } - drbd_pp_vacant = number; - return 0; Enomem: @@ -2169,10 +2149,6 @@ static void drbd_release_all_peer_reqs(struct drbd_device *device) rr = drbd_free_peer_reqs(device, &device->done_ee); if (rr) drbd_err(device, "%d EEs in done list found!\n", rr); - - rr = drbd_free_peer_reqs(device, &device->net_ee); - if (rr) - drbd_err(device, "%d EEs in net list found!\n", rr); } /* caution. no locking. */ @@ -2863,11 +2839,6 @@ static int __init drbd_init(void) return err; } - /* - * allocate all necessary structs - */ - init_waitqueue_head(&drbd_pp_wait); - drbd_proc = NULL; /* play safe for drbd_cleanup */ idr_init(&drbd_devices); diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c index 975024cf03c5..caaf2781136d 100644 --- a/drivers/block/drbd/drbd_receiver.c +++ b/drivers/block/drbd/drbd_receiver.c @@ -33,6 +33,7 @@ #include #include #include +#include #include "drbd_int.h" #include "drbd_protocol.h" #include "drbd_req.h" @@ -63,182 +64,31 @@ static int e_end_block(struct drbd_work *, int); #define GFP_TRY (__GFP_HIGHMEM | __GFP_NOWARN) -/* - * some helper functions to deal with single linked page lists, - * page->private being our "next" pointer. - */ - -/* If at least n pages are linked at head, get n pages off. - * Otherwise, don't modify head, and return NULL. - * Locking is the responsibility of the caller. - */ -static struct page *page_chain_del(struct page **head, int n) -{ - struct page *page; - struct page *tmp; - - BUG_ON(!n); - BUG_ON(!head); - - page = *head; - - if (!page) - return NULL; - - while (page) { - tmp = page_chain_next(page); - if (--n == 0) - break; /* found sufficient pages */ - if (tmp == NULL) - /* insufficient pages, don't use any of them. */ - return NULL; - page = tmp; - } - - /* add end of list marker for the returned list */ - set_page_private(page, 0); - /* actual return value, and adjustment of head */ - page = *head; - *head = tmp; - return page; -} - -/* may be used outside of locks to find the tail of a (usually short) - * "private" page chain, before adding it back to a global chain head - * with page_chain_add() under a spinlock. */ -static struct page *page_chain_tail(struct page *page, int *len) -{ - struct page *tmp; - int i = 1; - while ((tmp = page_chain_next(page))) { - ++i; - page = tmp; - } - if (len) - *len = i; - return page; -} - -static int page_chain_free(struct page *page) -{ - struct page *tmp; - int i = 0; - page_chain_for_each_safe(page, tmp) { - put_page(page); - ++i; - } - return i; -} - -static void page_chain_add(struct page **head, - struct page *chain_first, struct page *chain_last) -{ -#if 1 - struct page *tmp; - tmp = page_chain_tail(chain_first, NULL); - BUG_ON(tmp != chain_last); -#endif - - /* add chain to head */ - set_page_private(chain_last, (unsigned long)*head); - *head = chain_first; -} - -static struct page *__drbd_alloc_pages(struct drbd_device *device, - unsigned int number) +static struct page *__drbd_alloc_pages(unsigned int number) { struct page *page = NULL; struct page *tmp = NULL; unsigned int i = 0; - /* Yes, testing drbd_pp_vacant outside the lock is racy. - * So what. It saves a spin_lock. */ - if (drbd_pp_vacant >= number) { - spin_lock(&drbd_pp_lock); - page = page_chain_del(&drbd_pp_pool, number); - if (page) - drbd_pp_vacant -= number; - spin_unlock(&drbd_pp_lock); - if (page) - return page; - } - /* GFP_TRY, because we must not cause arbitrary write-out: in a DRBD * "criss-cross" setup, that might cause write-out on some other DRBD, * which in turn might block on the other node at this very place. */ for (i = 0; i < number; i++) { - tmp = alloc_page(GFP_TRY); + tmp = mempool_alloc(&drbd_buffer_page_pool, GFP_TRY); if (!tmp) - break; + goto fail; set_page_private(tmp, (unsigned long)page); page = tmp; } - - if (i == number) - return page; - - /* Not enough pages immediately available this time. - * No need to jump around here, drbd_alloc_pages will retry this - * function "soon". */ - if (page) { - tmp = page_chain_tail(page, NULL); - spin_lock(&drbd_pp_lock); - page_chain_add(&drbd_pp_pool, page, tmp); - drbd_pp_vacant += i; - spin_unlock(&drbd_pp_lock); + return page; +fail: + page_chain_for_each_safe(page, tmp) { + set_page_private(page, 0); + mempool_free(page, &drbd_buffer_page_pool); } return NULL; } -static void reclaim_finished_net_peer_reqs(struct drbd_device *device, - struct list_head *to_be_freed) -{ - struct drbd_peer_request *peer_req, *tmp; - - /* The EEs are always appended to the end of the list. Since - they are sent in order over the wire, they have to finish - in order. As soon as we see the first not finished we can - stop to examine the list... */ - - list_for_each_entry_safe(peer_req, tmp, &device->net_ee, w.list) { - if (drbd_peer_req_has_active_page(peer_req)) - break; - list_move(&peer_req->w.list, to_be_freed); - } -} - -static void drbd_reclaim_net_peer_reqs(struct drbd_device *device) -{ - LIST_HEAD(reclaimed); - struct drbd_peer_request *peer_req, *t; - - spin_lock_irq(&device->resource->req_lock); - reclaim_finished_net_peer_reqs(device, &reclaimed); - spin_unlock_irq(&device->resource->req_lock); - list_for_each_entry_safe(peer_req, t, &reclaimed, w.list) - drbd_free_net_peer_req(device, peer_req); -} - -static void conn_reclaim_net_peer_reqs(struct drbd_connection *connection) -{ - struct drbd_peer_device *peer_device; - int vnr; - - rcu_read_lock(); - idr_for_each_entry(&connection->peer_devices, peer_device, vnr) { - struct drbd_device *device = peer_device->device; - if (!atomic_read(&device->pp_in_use_by_net)) - continue; - - kref_get(&device->kref); - rcu_read_unlock(); - drbd_reclaim_net_peer_reqs(device); - kref_put(&device->kref, drbd_destroy_device); - rcu_read_lock(); - } - rcu_read_unlock(); -} - /** * drbd_alloc_pages() - Returns @number pages, retries forever (or until signalled) * @peer_device: DRBD device. @@ -263,9 +113,8 @@ struct page *drbd_alloc_pages(struct drbd_peer_device *peer_device, unsigned int bool retry) { struct drbd_device *device = peer_device->device; - struct page *page = NULL; + struct page *page; struct net_conf *nc; - DEFINE_WAIT(wait); unsigned int mxb; rcu_read_lock(); @@ -273,37 +122,9 @@ struct page *drbd_alloc_pages(struct drbd_peer_device *peer_device, unsigned int mxb = nc ? nc->max_buffers : 1000000; rcu_read_unlock(); - if (atomic_read(&device->pp_in_use) < mxb) - page = __drbd_alloc_pages(device, number); - - /* Try to keep the fast path fast, but occasionally we need - * to reclaim the pages we lended to the network stack. */ - if (page && atomic_read(&device->pp_in_use_by_net) > 512) - drbd_reclaim_net_peer_reqs(device); - - while (page == NULL) { - prepare_to_wait(&drbd_pp_wait, &wait, TASK_INTERRUPTIBLE); - - drbd_reclaim_net_peer_reqs(device); - - if (atomic_read(&device->pp_in_use) < mxb) { - page = __drbd_alloc_pages(device, number); - if (page) - break; - } - - if (!retry) - break; - - if (signal_pending(current)) { - drbd_warn(device, "drbd_alloc_pages interrupted!\n"); - break; - } - - if (schedule_timeout(HZ/10) == 0) - mxb = UINT_MAX; - } - finish_wait(&drbd_pp_wait, &wait); + if (atomic_read(&device->pp_in_use) >= mxb) + schedule_timeout_interruptible(HZ / 10); + page = __drbd_alloc_pages(number); if (page) atomic_add(number, &device->pp_in_use); @@ -314,29 +135,25 @@ struct page *drbd_alloc_pages(struct drbd_peer_device *peer_device, unsigned int * Is also used from inside an other spin_lock_irq(&resource->req_lock); * Either links the page chain back to the global pool, * or returns all pages to the system. */ -static void drbd_free_pages(struct drbd_device *device, struct page *page, int is_net) +static void drbd_free_pages(struct drbd_device *device, struct page *page) { - atomic_t *a = is_net ? &device->pp_in_use_by_net : &device->pp_in_use; - int i; + struct page *tmp; + int i = 0; if (page == NULL) return; - if (drbd_pp_vacant > (DRBD_MAX_BIO_SIZE/PAGE_SIZE) * drbd_minor_count) - i = page_chain_free(page); - else { - struct page *tmp; - tmp = page_chain_tail(page, &i); - spin_lock(&drbd_pp_lock); - page_chain_add(&drbd_pp_pool, page, tmp); - drbd_pp_vacant += i; - spin_unlock(&drbd_pp_lock); - } - i = atomic_sub_return(i, a); + page_chain_for_each_safe(page, tmp) { + set_page_private(page, 0); + if (page_count(page) == 1) + mempool_free(page, &drbd_buffer_page_pool); + else + put_page(page); + i++; + } + i = atomic_sub_return(i, &device->pp_in_use); if (i < 0) - drbd_warn(device, "ASSERTION FAILED: %s: %d < 0\n", - is_net ? "pp_in_use_by_net" : "pp_in_use", i); - wake_up(&drbd_pp_wait); + drbd_warn(device, "ASSERTION FAILED: pp_in_use: %d < 0\n", i); } /* @@ -380,6 +197,8 @@ drbd_alloc_peer_req(struct drbd_peer_device *peer_device, u64 id, sector_t secto gfpflags_allow_blocking(gfp_mask)); if (!page) goto fail; + if (!mempool_is_saturated(&drbd_buffer_page_pool)) + peer_req->flags |= EE_RELEASE_TO_MEMPOOL; } memset(peer_req, 0, sizeof(*peer_req)); @@ -403,13 +222,12 @@ drbd_alloc_peer_req(struct drbd_peer_device *peer_device, u64 id, sector_t secto return NULL; } -void __drbd_free_peer_req(struct drbd_device *device, struct drbd_peer_request *peer_req, - int is_net) +void drbd_free_peer_req(struct drbd_device *device, struct drbd_peer_request *peer_req) { might_sleep(); if (peer_req->flags & EE_HAS_DIGEST) kfree(peer_req->digest); - drbd_free_pages(device, peer_req->pages, is_net); + drbd_free_pages(device, peer_req->pages); D_ASSERT(device, atomic_read(&peer_req->pending_bios) == 0); D_ASSERT(device, drbd_interval_empty(&peer_req->i)); if (!expect(device, !(peer_req->flags & EE_CALL_AL_COMPLETE_IO))) { @@ -424,14 +242,13 @@ int drbd_free_peer_reqs(struct drbd_device *device, struct list_head *list) LIST_HEAD(work_list); struct drbd_peer_request *peer_req, *t; int count = 0; - int is_net = list == &device->net_ee; spin_lock_irq(&device->resource->req_lock); list_splice_init(list, &work_list); spin_unlock_irq(&device->resource->req_lock); list_for_each_entry_safe(peer_req, t, &work_list, w.list) { - __drbd_free_peer_req(device, peer_req, is_net); + drbd_free_peer_req(device, peer_req); count++; } return count; @@ -443,18 +260,13 @@ int drbd_free_peer_reqs(struct drbd_device *device, struct list_head *list) static int drbd_finish_peer_reqs(struct drbd_device *device) { LIST_HEAD(work_list); - LIST_HEAD(reclaimed); struct drbd_peer_request *peer_req, *t; int err = 0; spin_lock_irq(&device->resource->req_lock); - reclaim_finished_net_peer_reqs(device, &reclaimed); list_splice_init(&device->done_ee, &work_list); spin_unlock_irq(&device->resource->req_lock); - list_for_each_entry_safe(peer_req, t, &reclaimed, w.list) - drbd_free_net_peer_req(device, peer_req); - /* possible callbacks here: * e_end_block, and e_end_resync_block, e_send_superseded. * all ignore the last argument. @@ -1975,7 +1787,7 @@ static int drbd_drain_block(struct drbd_peer_device *peer_device, int data_size) data_size -= len; } kunmap(page); - drbd_free_pages(peer_device->device, page, 0); + drbd_free_pages(peer_device->device, page); return err; } @@ -5224,16 +5036,6 @@ static int drbd_disconnected(struct drbd_peer_device *peer_device) put_ldev(device); } - /* tcp_close and release of sendpage pages can be deferred. I don't - * want to use SO_LINGER, because apparently it can be deferred for - * more than 20 seconds (longest time I checked). - * - * Actually we don't care for exactly when the network stack does its - * put_page(), but release our reference on these pages right here. - */ - i = drbd_free_peer_reqs(device, &device->net_ee); - if (i) - drbd_info(device, "net_ee not empty, killed %u entries\n", i); i = atomic_read(&device->pp_in_use_by_net); if (i) drbd_info(device, "pp_in_use_by_net = %d, expected 0\n", i); @@ -5980,8 +5782,6 @@ int drbd_ack_receiver(struct drbd_thread *thi) while (get_t_state(thi) == RUNNING) { drbd_thread_current_set_cpu(thi); - conn_reclaim_net_peer_reqs(connection); - if (test_and_clear_bit(SEND_PING, &connection->flags)) { if (drbd_send_ping(connection)) { drbd_err(connection, "drbd_send_ping has failed\n"); diff --git a/drivers/block/drbd/drbd_worker.c b/drivers/block/drbd/drbd_worker.c index a6ea737b3b71..dea3e79d044f 100644 --- a/drivers/block/drbd/drbd_worker.c +++ b/drivers/block/drbd/drbd_worker.c @@ -1030,22 +1030,6 @@ out: return 1; } -/* helper */ -static void move_to_net_ee_or_free(struct drbd_device *device, struct drbd_peer_request *peer_req) -{ - if (drbd_peer_req_has_active_page(peer_req)) { - /* This might happen if sendpage() has not finished */ - int i = PFN_UP(peer_req->i.size); - atomic_add(i, &device->pp_in_use_by_net); - atomic_sub(i, &device->pp_in_use); - spin_lock_irq(&device->resource->req_lock); - list_add_tail(&peer_req->w.list, &device->net_ee); - spin_unlock_irq(&device->resource->req_lock); - wake_up(&drbd_pp_wait); - } else - drbd_free_peer_req(device, peer_req); -} - /** * w_e_end_data_req() - Worker callback, to send a P_DATA_REPLY packet in response to a P_DATA_REQUEST * @w: work object. @@ -1059,9 +1043,8 @@ int w_e_end_data_req(struct drbd_work *w, int cancel) int err; if (unlikely(cancel)) { - drbd_free_peer_req(device, peer_req); - dec_unacked(device); - return 0; + err = 0; + goto out; } if (likely((peer_req->flags & EE_WAS_ERROR) == 0)) { @@ -1074,12 +1057,12 @@ int w_e_end_data_req(struct drbd_work *w, int cancel) err = drbd_send_ack(peer_device, P_NEG_DREPLY, peer_req); } - dec_unacked(device); - - move_to_net_ee_or_free(device, peer_req); - if (unlikely(err)) drbd_err(device, "drbd_send_block() failed\n"); +out: + dec_unacked(device); + drbd_free_peer_req(device, peer_req); + return err; } @@ -1120,9 +1103,8 @@ int w_e_end_rsdata_req(struct drbd_work *w, int cancel) int err; if (unlikely(cancel)) { - drbd_free_peer_req(device, peer_req); - dec_unacked(device); - return 0; + err = 0; + goto out; } if (get_ldev_if_state(device, D_FAILED)) { @@ -1155,13 +1137,12 @@ int w_e_end_rsdata_req(struct drbd_work *w, int cancel) /* update resync data with failure */ drbd_rs_failed_io(peer_device, peer_req->i.sector, peer_req->i.size); } - - dec_unacked(device); - - move_to_net_ee_or_free(device, peer_req); - if (unlikely(err)) drbd_err(device, "drbd_send_block() failed\n"); +out: + dec_unacked(device); + drbd_free_peer_req(device, peer_req); + return err; } @@ -1176,9 +1157,8 @@ int w_e_end_csum_rs_req(struct drbd_work *w, int cancel) int err, eq = 0; if (unlikely(cancel)) { - drbd_free_peer_req(device, peer_req); - dec_unacked(device); - return 0; + err = 0; + goto out; } if (get_ldev(device)) { @@ -1220,12 +1200,12 @@ int w_e_end_csum_rs_req(struct drbd_work *w, int cancel) if (drbd_ratelimit()) drbd_err(device, "Sending NegDReply. I guess it gets messy.\n"); } - - dec_unacked(device); - move_to_net_ee_or_free(device, peer_req); - if (unlikely(err)) drbd_err(device, "drbd_send_block/ack() failed\n"); +out: + dec_unacked(device); + drbd_free_peer_req(device, peer_req); + return err; } -- cgit v1.2.3 From 212c928d01e9ea1d1c46a114650b551da8ca823e Mon Sep 17 00:00:00 2001 From: Uday Shankar Date: Fri, 8 Aug 2025 15:44:43 -0600 Subject: ublk: don't quiesce in ublk_ch_release ublk_ch_release currently quiesces the device's request_queue while setting force_abort/fail_io. This avoids data races by preventing concurrent reads from the I/O path, but is not strictly needed - at this point, canceling is already set and guaranteed to be observed by any concurrently executing I/Os, so they will be handled properly even if the changes to force_abort/fail_io propagate to the I/O path later. Remove the quiesce/unquiesce calls from ublk_ch_release. This makes the writes to force_abort/fail_io concurrent with the reads in the I/O path, so make the accesses atomic. Before this change, the call to blk_mq_quiesce_queue was responsible for most (90%) of the runtime of ublk_ch_release. With that call eliminated, ublk_ch_release runs much faster. Here is a comparison of the total time spent in calls to ublk_ch_release when a server handling 128 devices exits, before and after this change: before: 1.11s after: 0.09s Signed-off-by: Uday Shankar Reviewed-by: Ming Lei Link: https://lore.kernel.org/r/20250808-ublk_quiesce2-v1-1-f87ade33fa3d@purestorage.com Signed-off-by: Jens Axboe --- drivers/block/ublk_drv.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c index 6561d2a561fa..6b95cf48ae77 100644 --- a/drivers/block/ublk_drv.c +++ b/drivers/block/ublk_drv.c @@ -1389,7 +1389,7 @@ static blk_status_t ublk_prep_req(struct ublk_queue *ubq, struct request *rq, { blk_status_t res; - if (unlikely(ubq->fail_io)) + if (unlikely(READ_ONCE(ubq->fail_io))) return BLK_STS_TARGET; /* With recovery feature enabled, force_abort is set in @@ -1401,7 +1401,8 @@ static blk_status_t ublk_prep_req(struct ublk_queue *ubq, struct request *rq, * Note: force_abort is guaranteed to be seen because it is set * before request queue is unqiuesced. */ - if (ublk_nosrv_should_queue_io(ubq) && unlikely(ubq->force_abort)) + if (ublk_nosrv_should_queue_io(ubq) && + unlikely(READ_ONCE(ubq->force_abort))) return BLK_STS_IOERR; if (check_cancel && unlikely(ubq->canceling)) @@ -1644,7 +1645,6 @@ static int ublk_ch_release(struct inode *inode, struct file *filp) * Transition the device to the nosrv state. What exactly this * means depends on the recovery flags */ - blk_mq_quiesce_queue(disk->queue); if (ublk_nosrv_should_stop_dev(ub)) { /* * Allow any pending/future I/O to pass through quickly @@ -1652,8 +1652,7 @@ static int ublk_ch_release(struct inode *inode, struct file *filp) * waits for all pending I/O to complete */ for (i = 0; i < ub->dev_info.nr_hw_queues; i++) - ublk_get_queue(ub, i)->force_abort = true; - blk_mq_unquiesce_queue(disk->queue); + WRITE_ONCE(ublk_get_queue(ub, i)->force_abort, true); ublk_stop_dev_unlocked(ub); } else { @@ -1663,9 +1662,8 @@ static int ublk_ch_release(struct inode *inode, struct file *filp) } else { ub->dev_info.state = UBLK_S_DEV_FAIL_IO; for (i = 0; i < ub->dev_info.nr_hw_queues; i++) - ublk_get_queue(ub, i)->fail_io = true; + WRITE_ONCE(ublk_get_queue(ub, i)->fail_io, true); } - blk_mq_unquiesce_queue(disk->queue); } unlock: mutex_unlock(&ub->mutex); -- cgit v1.2.3 From 5058a62875e1916e5133a1639f0207ea2148c0bc Mon Sep 17 00:00:00 2001 From: Caleb Sander Mateos Date: Fri, 8 Aug 2025 09:52:15 -0600 Subject: ublk: check for unprivileged daemon on each I/O fetch Commit ab03a61c6614 ("ublk: have a per-io daemon instead of a per-queue daemon") allowed each ublk I/O to have an independent daemon task. However, nr_privileged_daemon is only computed based on whether the last I/O fetched in each ublk queue has an unprivileged daemon task. Fix this by checking whether every fetched I/O's daemon is privileged. Change nr_privileged_daemon from a count of queues to a boolean indicating whether any I/Os have an unprivileged daemon. Signed-off-by: Caleb Sander Mateos Fixes: ab03a61c6614 ("ublk: have a per-io daemon instead of a per-queue daemon") Reviewed-by: Ming Lei Link: https://lore.kernel.org/r/20250808155216.296170-1-csander@purestorage.com Signed-off-by: Jens Axboe --- drivers/block/ublk_drv.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c index 6b95cf48ae77..99abd67b708b 100644 --- a/drivers/block/ublk_drv.c +++ b/drivers/block/ublk_drv.c @@ -235,7 +235,7 @@ struct ublk_device { struct completion completion; unsigned int nr_queues_ready; - unsigned int nr_privileged_daemon; + bool unprivileged_daemons; struct mutex cancel_mutex; bool canceling; pid_t ublksrv_tgid; @@ -1551,7 +1551,7 @@ static void ublk_reset_ch_dev(struct ublk_device *ub) /* set to NULL, otherwise new tasks cannot mmap io_cmd_buf */ ub->mm = NULL; ub->nr_queues_ready = 0; - ub->nr_privileged_daemon = 0; + ub->unprivileged_daemons = false; ub->ublksrv_tgid = -1; } @@ -1978,12 +1978,10 @@ static void ublk_mark_io_ready(struct ublk_device *ub, struct ublk_queue *ubq) __must_hold(&ub->mutex) { ubq->nr_io_ready++; - if (ublk_queue_ready(ubq)) { + if (ublk_queue_ready(ubq)) ub->nr_queues_ready++; - - if (capable(CAP_SYS_ADMIN)) - ub->nr_privileged_daemon++; - } + if (!ub->unprivileged_daemons && !capable(CAP_SYS_ADMIN)) + ub->unprivileged_daemons = true; if (ub->nr_queues_ready == ub->dev_info.nr_hw_queues) { /* now we are ready for handling ublk io request */ @@ -2878,8 +2876,8 @@ static int ublk_ctrl_start_dev(struct ublk_device *ub, ublk_apply_params(ub); - /* don't probe partitions if any one ubq daemon is un-trusted */ - if (ub->nr_privileged_daemon != ub->nr_queues_ready) + /* don't probe partitions if any daemon task is un-trusted */ + if (ub->unprivileged_daemons) set_bit(GD_SUPPRESS_PART_SCAN, &disk->state); ublk_get_device(ub); -- cgit v1.2.3 From e91a158b694d7f4bd937763dde79ed0afa472d8a Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 8 Aug 2025 15:37:14 -0400 Subject: intel_idle: Allow loading ACPI tables for any family There is no reason to limit intel_idle's loading of ACPI tables to family 6. Upcoming Intel processors are not in family 6. Below "Fixes" really means "applies cleanly until". That syntax commit didn't change the previous logic, but shows this patch applies back 5-years. Fixes: 4a9f45a0533f ("intel_idle: Convert to new X86 CPU match macros") Signed-off-by: Len Brown Link: https://patch.msgid.link/06101aa4fe784e5b0be1cb2c0bdd9afcf16bd9d4.1754681697.git.len.brown@intel.com Signed-off-by: Rafael J. Wysocki --- drivers/idle/intel_idle.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c index 73747d20df85..91a7b7e7c0c8 100644 --- a/drivers/idle/intel_idle.c +++ b/drivers/idle/intel_idle.c @@ -1679,7 +1679,7 @@ static const struct x86_cpu_id intel_idle_ids[] __initconst = { }; static const struct x86_cpu_id intel_mwait_ids[] __initconst = { - X86_MATCH_VENDOR_FAM_FEATURE(INTEL, 6, X86_FEATURE_MWAIT, NULL), + X86_MATCH_VENDOR_FAM_FEATURE(INTEL, X86_FAMILY_ANY, X86_FEATURE_MWAIT, NULL), {} }; -- cgit v1.2.3 From fa3fa55de0d6177fdcaf6fc254f13cc8f33c3eed Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 11 Aug 2025 17:03:11 +0200 Subject: cpuidle: governors: menu: Avoid using invalid recent intervals data Marc has reported that commit 85975daeaa4d ("cpuidle: menu: Avoid discarding useful information") caused the number of wakeup interrupts to increase on an idle system [1], which was not expected to happen after merely allowing shallower idle states to be selected by the governor in some cases. However, on the system in question, all of the idle states deeper than WFI are rejected by the driver due to a firmware issue [2]. This causes the governor to only consider the recent interval duriation data corresponding to attempts to enter WFI that are successful and the recent invervals table is filled with values lower than the scheduler tick period. Consequently, the governor predicts an idle duration below the scheduler tick period length and avoids stopping the tick more often which leads to the observed symptom. Address it by modifying the governor to update the recent intervals table also when entering the previously selected idle state fails, so it knows that the short idle intervals might have been the minority had the selected idle states been actually entered every time. Fixes: 85975daeaa4d ("cpuidle: menu: Avoid discarding useful information") Link: https://lore.kernel.org/linux-pm/86o6sv6n94.wl-maz@kernel.org/ [1] Link: https://lore.kernel.org/linux-pm/7ffcb716-9a1b-48c2-aaa4-469d0df7c792@arm.com/ [2] Signed-off-by: Rafael J. Wysocki Tested-by: Christian Loehle Tested-by: Marc Zyngier Reviewed-by: Christian Loehle Link: https://patch.msgid.link/2793874.mvXUDI8C0e@rafael.j.wysocki --- drivers/cpuidle/governors/menu.c | 21 +++++++++++++++++---- 1 file changed, 17 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/cpuidle/governors/menu.c b/drivers/cpuidle/governors/menu.c index 52d5d26fc7c6..81306612a5c6 100644 --- a/drivers/cpuidle/governors/menu.c +++ b/drivers/cpuidle/governors/menu.c @@ -97,6 +97,14 @@ static inline int which_bucket(u64 duration_ns) static DEFINE_PER_CPU(struct menu_device, menu_devices); +static void menu_update_intervals(struct menu_device *data, unsigned int interval_us) +{ + /* Update the repeating-pattern data. */ + data->intervals[data->interval_ptr++] = interval_us; + if (data->interval_ptr >= INTERVALS) + data->interval_ptr = 0; +} + static void menu_update(struct cpuidle_driver *drv, struct cpuidle_device *dev); /* @@ -222,6 +230,14 @@ static int menu_select(struct cpuidle_driver *drv, struct cpuidle_device *dev, if (data->needs_update) { menu_update(drv, dev); data->needs_update = 0; + } else if (!dev->last_residency_ns) { + /* + * This happens when the driver rejects the previously selected + * idle state and returns an error, so update the recent + * intervals table to prevent invalid information from being + * used going forward. + */ + menu_update_intervals(data, UINT_MAX); } /* Find the shortest expected idle interval. */ @@ -482,10 +498,7 @@ static void menu_update(struct cpuidle_driver *drv, struct cpuidle_device *dev) data->correction_factor[data->bucket] = new_factor; - /* update the repeating-pattern data */ - data->intervals[data->interval_ptr++] = ktime_to_us(measured_ns); - if (data->interval_ptr >= INTERVALS) - data->interval_ptr = 0; + menu_update_intervals(data, ktime_to_us(measured_ns)); } /** -- cgit v1.2.3 From 3ead77989c20cb2d774a3b6045d7a928b6fb53ed Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Fri, 8 Aug 2025 07:51:22 -0700 Subject: cpufreq: intel_pstate: Support Clearwater Forest OOB mode Prevent intel_pstate from loading when OOB (Out Of Band) P-states mode is enabled. Signed-off-by: Srinivas Pandruvada Link: https://patch.msgid.link/20250808145122.4057208-1-srinivas.pandruvada@linux.intel.com Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 06a1c7dd081f..f366d35c5840 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -2793,6 +2793,7 @@ static const struct x86_cpu_id intel_pstate_cpu_oob_ids[] __initconst = { X86_MATCH(INTEL_GRANITERAPIDS_X, core_funcs), X86_MATCH(INTEL_ATOM_CRESTMONT, core_funcs), X86_MATCH(INTEL_ATOM_CRESTMONT_X, core_funcs), + X86_MATCH(INTEL_ATOM_DARKMONT_X, core_funcs), {} }; #endif -- cgit v1.2.3 From 61aaca8b89fb98be58b8df19f01181bb983cccff Mon Sep 17 00:00:00 2001 From: Fabio Porcedda Date: Fri, 8 Aug 2025 15:31:08 +0200 Subject: net: usb: qmi_wwan: add Telit Cinterion FN990A w/audio composition MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add the following Telit Cinterion FN990A w/audio composition: 0x1077: tty (diag) + adb + rmnet + audio + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) T: Bus=01 Lev=01 Prnt=01 Port=09 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=1077 Rev=05.04 S: Manufacturer=Telit Wireless Solutions S: Product=FN990 S: SerialNumber=67e04c35 C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=20 Driver=snd-usb-audio I: If#= 4 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=20 Driver=snd-usb-audio E: Ad=03(O) Atr=0d(Isoc) MxPS= 68 Ivl=1ms I: If#= 5 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=20 Driver=snd-usb-audio E: Ad=84(I) Atr=0d(Isoc) MxPS= 68 Ivl=1ms I: If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 7 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 9 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8c(I) Atr=03(Int.) MxPS= 10 Ivl=32ms Cc: stable@vger.kernel.org Signed-off-by: Fabio Porcedda Acked-by: Bjørn Mork Signed-off-by: Jakub Kicinski --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index f5647ee0adde..e56901bb6ebc 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1361,6 +1361,7 @@ static const struct usb_device_id products[] = { {QMI_QUIRK_SET_DTR(0x1bc7, 0x1057, 2)}, /* Telit FN980 */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1060, 2)}, /* Telit LN920 */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1070, 2)}, /* Telit FN990A */ + {QMI_QUIRK_SET_DTR(0x1bc7, 0x1077, 2)}, /* Telit FN990A w/audio */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1080, 2)}, /* Telit FE990A */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x10a0, 0)}, /* Telit FN920C04 */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x10a4, 0)}, /* Telit FN920C04 */ -- cgit v1.2.3 From de1e963ad064caf73ee2c7485b925f381a3aefbf Mon Sep 17 00:00:00 2001 From: "Russell King (Oracle)" Date: Fri, 8 Aug 2025 13:16:34 +0100 Subject: net: stmmac: rk: put the PHY clock on remove The PHY clock (bsp_priv->clk_phy) is obtained using of_clk_get(), which doesn't take part in the devm release. Therefore, when a device is unbound, this clock needs to be explicitly put. Fix this. Signed-off-by: Russell King (Oracle) Reviewed-by: Simon Horman Fixes: fecd4d7eef8b ("net: stmmac: dwmac-rk: Add integrated PHY support") Link: https://patch.msgid.link/E1ukM1S-0086qo-PC@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c index 79b92130a03f..f6687c2f30f6 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c @@ -1765,11 +1765,15 @@ err_gmac_powerdown: static void rk_gmac_remove(struct platform_device *pdev) { - struct rk_priv_data *bsp_priv = get_stmmac_bsp_priv(&pdev->dev); + struct stmmac_priv *priv = netdev_priv(platform_get_drvdata(pdev)); + struct rk_priv_data *bsp_priv = priv->plat->bsp_priv; stmmac_dvr_remove(&pdev->dev); rk_gmac_powerdown(bsp_priv); + + if (priv->plat->phy_node && bsp_priv->integrated_phy) + clk_put(bsp_priv->clk_phy); } #ifdef CONFIG_PM_SLEEP -- cgit v1.2.3 From 89886abd073489e26614e4d80fb8eb70d3938a0b Mon Sep 17 00:00:00 2001 From: "Russell King (Oracle)" Date: Fri, 8 Aug 2025 13:16:39 +0100 Subject: net: stmmac: dwc-qos: fix clk prepare/enable leak on probe failure dwc_eth_dwmac_probe() gets bulk clocks, and then prepares and enables them. Unfortunately, if dwc_eth_dwmac_config_dt() or stmmac_dvr_probe() fail, we leave the clocks prepared and enabled. Fix this by using devm_clk_bulk_get_all_enabled() to combine the steps and provide devm based release of the prepare and enable state. This also fixes a similar leakin dwc_eth_dwmac_remove() which wasn't correctly retrieving the struct plat_stmmacenet_data. This becomes unnecessary. Signed-off-by: Russell King (Oracle) Reviewed-by: Simon Horman Fixes: a045e40645df ("net: stmmac: refactor clock management in EQoS driver") Link: https://patch.msgid.link/E1ukM1X-0086qu-Td@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c | 13 ++----------- 1 file changed, 2 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c index 09ae16e026eb..6c363f9b0ce2 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c @@ -330,15 +330,11 @@ static int dwc_eth_dwmac_probe(struct platform_device *pdev) if (IS_ERR(plat_dat)) return PTR_ERR(plat_dat); - ret = devm_clk_bulk_get_all(&pdev->dev, &plat_dat->clks); + ret = devm_clk_bulk_get_all_enabled(&pdev->dev, &plat_dat->clks); if (ret < 0) - return dev_err_probe(&pdev->dev, ret, "Failed to retrieve all required clocks\n"); + return dev_err_probe(&pdev->dev, ret, "Failed to retrieve and enable all required clocks\n"); plat_dat->num_clks = ret; - ret = clk_bulk_prepare_enable(plat_dat->num_clks, plat_dat->clks); - if (ret) - return dev_err_probe(&pdev->dev, ret, "Failed to enable clocks\n"); - plat_dat->stmmac_clk = stmmac_pltfr_find_clk(plat_dat, data->stmmac_clk_name); @@ -346,7 +342,6 @@ static int dwc_eth_dwmac_probe(struct platform_device *pdev) ret = data->probe(pdev, plat_dat, &stmmac_res); if (ret < 0) { dev_err_probe(&pdev->dev, ret, "failed to probe subdriver\n"); - clk_bulk_disable_unprepare(plat_dat->num_clks, plat_dat->clks); return ret; } @@ -370,15 +365,11 @@ remove: static void dwc_eth_dwmac_remove(struct platform_device *pdev) { const struct dwc_eth_dwmac_data *data = device_get_match_data(&pdev->dev); - struct plat_stmmacenet_data *plat_dat = dev_get_platdata(&pdev->dev); stmmac_dvr_remove(&pdev->dev); if (data->remove) data->remove(pdev); - - if (plat_dat) - clk_bulk_disable_unprepare(plat_dat->num_clks, plat_dat->clks); } static const struct of_device_id dwc_eth_dwmac_match[] = { -- cgit v1.2.3 From 54d4f445517fe8350d735624d7f4225e7511d9eb Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Adri=C3=A1n=20Larumbe?= Date: Fri, 8 Aug 2025 02:02:34 +0100 Subject: drm/panfrost: Print RSS for tiler heap BO's in debugfs GEMS file MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Otherwise it would display the virtual allocation size, which is often much bigger than the RSS. Signed-off-by: Adrián Larumbe Fixes: e48ade5e23ba ("drm/panfrost: show device-wide list of DRM GEM objects over DebugFS") Tested-by: Christopher Healy Reviewed-by: Daniel Stone Signed-off-by: Thomas Zimmermann Link: https://lore.kernel.org/r/20250808010235.2831853-1-adrian.larumbe@collabora.com --- drivers/gpu/drm/panfrost/panfrost_gem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/panfrost/panfrost_gem.c b/drivers/gpu/drm/panfrost/panfrost_gem.c index bb73f2a68a12..85d6289a6eda 100644 --- a/drivers/gpu/drm/panfrost/panfrost_gem.c +++ b/drivers/gpu/drm/panfrost/panfrost_gem.c @@ -432,7 +432,7 @@ static void panfrost_gem_debugfs_bo_print(struct panfrost_gem_object *bo, if (!refcount) return; - resident_size = bo->base.pages ? bo->base.base.size : 0; + resident_size = panfrost_gem_rss(&bo->base.base); snprintf(creator_info, sizeof(creator_info), "%s/%d", bo->debugfs.creator.process_name, bo->debugfs.creator.tgid); -- cgit v1.2.3 From fd56b9c9507f32b16159f9a922e1af5628254567 Mon Sep 17 00:00:00 2001 From: Vinod Govindapillai Date: Tue, 29 Jul 2025 15:46:48 +0300 Subject: drm/i915/fbc: fix the implementation of wa_18038517565 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As per the wa_18038517565, we need to disable FBC compressor clock gating before enabling FBC and enable after disabling FBC. Placing the enabling of clock gating in the fbc deactivate function can make the above wa logic go wrong in case of frontbuffer rendering FBC mechanism. FBC deactivate can get called during fb invalidate and then the corresponding FBC activate can get called without properly disabling the clock gating and can result in compression stalled. So move the enable clock gating at the end of one FBC session after FBC is completely disabled for a pipe. Bspec: 74212, 72197, 69741, 65555 Fixes: 010363c46189 ("drm/i915/display: implement wa_18038517565") Signed-off-by: Vinod Govindapillai Reviewed-by: Jouni Högander Link: https://lore.kernel.org/r/20250729124648.288497-1-vinod.govindapillai@intel.com (cherry picked from commit 82dde0407ab126f8413fd6c51429e5057ced5ba2) Signed-off-by: Tvrtko Ursulin --- drivers/gpu/drm/i915/display/intel_fbc.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/display/intel_fbc.c b/drivers/gpu/drm/i915/display/intel_fbc.c index 6e26cb4c5724..685ac98bd001 100644 --- a/drivers/gpu/drm/i915/display/intel_fbc.c +++ b/drivers/gpu/drm/i915/display/intel_fbc.c @@ -552,10 +552,6 @@ static void ilk_fbc_deactivate(struct intel_fbc *fbc) if (dpfc_ctl & DPFC_CTL_EN) { dpfc_ctl &= ~DPFC_CTL_EN; intel_de_write(display, ILK_DPFC_CONTROL(fbc->id), dpfc_ctl); - - /* wa_18038517565 Enable DPFC clock gating after FBC disable */ - if (display->platform.dg2 || DISPLAY_VER(display) >= 14) - fbc_compressor_clkgate_disable_wa(fbc, false); } } @@ -1710,6 +1706,10 @@ static void __intel_fbc_disable(struct intel_fbc *fbc) __intel_fbc_cleanup_cfb(fbc); + /* wa_18038517565 Enable DPFC clock gating after FBC disable */ + if (display->platform.dg2 || DISPLAY_VER(display) >= 14) + fbc_compressor_clkgate_disable_wa(fbc, false); + fbc->state.plane = NULL; fbc->flip_pending = false; fbc->busy_bits = 0; -- cgit v1.2.3 From 184889dfe0568528fd6d14bba864dd57ed45bbf2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jouni=20H=C3=B6gander?= Date: Fri, 1 Aug 2025 09:29:05 +0300 Subject: drm/i915/psr: Do not trigger Frame Change events from frontbuffer flush MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We want to get rid of triggering "Frame Change" events from frontbuffer flush calls. We are about to move using TRANS_PUSH register for this on LunarLake and onwards. Touching TRANS_PUSH register from fronbuffer flush would be problematic as it's written by DSB as well. Fix this by using intel_psr_exit when flush or invalidate is done on LunarLake and onwards. This is not possible on AlderLake and MeteorLake due to HW bug in PSR2 disable. This patch is also fixing problems with cursor plane where cursor is disappearing or duplicate cursor is seen on the screen. v2: Commit message updated Bspec: 68927, 68934, 66624 Reported-by: Janna Martl Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/5522 Fixes: 411ad63877bb ("drm/i915/psr: Use SFF_CTL on invalidate/flush for LunarLake onwards") Tested-by: Janna Martl Signed-off-by: Jouni Högander Reviewed-by: Suraj Kandpal Link: https://lore.kernel.org/r/20250801062905.564453-1-jouni.hogander@intel.com (cherry picked from commit 46fb38cb20c0d185a6391ab524b23e0e0219c41f) Signed-off-by: Tvrtko Ursulin --- drivers/gpu/drm/i915/display/intel_psr.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/display/intel_psr.c b/drivers/gpu/drm/i915/display/intel_psr.c index ae9053919211..41988e193a41 100644 --- a/drivers/gpu/drm/i915/display/intel_psr.c +++ b/drivers/gpu/drm/i915/display/intel_psr.c @@ -3275,7 +3275,9 @@ static void intel_psr_configure_full_frame_update(struct intel_dp *intel_dp) static void _psr_invalidate_handle(struct intel_dp *intel_dp) { - if (intel_dp->psr.psr2_sel_fetch_enabled) { + struct intel_display *display = to_intel_display(intel_dp); + + if (DISPLAY_VER(display) < 20 && intel_dp->psr.psr2_sel_fetch_enabled) { if (!intel_dp->psr.psr2_sel_fetch_cff_enabled) { intel_dp->psr.psr2_sel_fetch_cff_enabled = true; intel_psr_configure_full_frame_update(intel_dp); @@ -3361,7 +3363,7 @@ static void _psr_flush_handle(struct intel_dp *intel_dp) { struct intel_display *display = to_intel_display(intel_dp); - if (intel_dp->psr.psr2_sel_fetch_enabled) { + if (DISPLAY_VER(display) < 20 && intel_dp->psr.psr2_sel_fetch_enabled) { if (intel_dp->psr.psr2_sel_fetch_cff_enabled) { /* can we turn CFF off? */ if (intel_dp->psr.busy_frontbuffer_bits == 0) @@ -3378,11 +3380,13 @@ static void _psr_flush_handle(struct intel_dp *intel_dp) * existing SU configuration */ intel_psr_configure_full_frame_update(intel_dp); - } - intel_psr_force_update(intel_dp); + intel_psr_force_update(intel_dp); + } else { + intel_psr_exit(intel_dp); + } - if (!intel_dp->psr.psr2_sel_fetch_enabled && !intel_dp->psr.active && + if ((!intel_dp->psr.psr2_sel_fetch_enabled || DISPLAY_VER(display) >= 20) && !intel_dp->psr.busy_frontbuffer_bits) queue_work(display->wq.unordered, &intel_dp->psr.work); } -- cgit v1.2.3 From 8ee90742cf29427683294a6a80f1e2b7f4af1cff Mon Sep 17 00:00:00 2001 From: Clark Wang Date: Thu, 7 Aug 2025 12:08:32 +0800 Subject: net: phy: nxp-c45-tja11xx: fix the PHY ID mismatch issue when using C45 TJA1103/04/20/21 support both C22 and C45 accessing methods. The TJA11xx driver has implemented the match_phy_device() API. However, it does not handle the C45 ID. If C45 was used to access TJA11xx, match_phy_device() would always return false due to phydev->phy_id only used by C22 being empty, resulting in the generic phy driver being used for TJA11xx PHYs. Therefore, check phydev->c45_ids.device_ids[MDIO_MMD_PMAPMD] when using C45. Fixes: 1b76b2497aba ("net: phy: nxp-c45-tja11xx: simplify .match_phy_device OP") Signed-off-by: Clark Wang Link: https://patch.msgid.link/20250807040832.2455306-1-xiaoning.wang@nxp.com Signed-off-by: Paolo Abeni --- drivers/net/phy/nxp-c45-tja11xx.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/nxp-c45-tja11xx.c b/drivers/net/phy/nxp-c45-tja11xx.c index 4c6d905f0a9f..87adb6508017 100644 --- a/drivers/net/phy/nxp-c45-tja11xx.c +++ b/drivers/net/phy/nxp-c45-tja11xx.c @@ -1965,24 +1965,27 @@ static int nxp_c45_macsec_ability(struct phy_device *phydev) return macsec_ability; } +static bool tja11xx_phy_id_compare(struct phy_device *phydev, + const struct phy_driver *phydrv) +{ + u32 id = phydev->is_c45 ? phydev->c45_ids.device_ids[MDIO_MMD_PMAPMD] : + phydev->phy_id; + + return phy_id_compare(id, phydrv->phy_id, phydrv->phy_id_mask); +} + static int tja11xx_no_macsec_match_phy_device(struct phy_device *phydev, const struct phy_driver *phydrv) { - if (!phy_id_compare(phydev->phy_id, phydrv->phy_id, - phydrv->phy_id_mask)) - return 0; - - return !nxp_c45_macsec_ability(phydev); + return tja11xx_phy_id_compare(phydev, phydrv) && + !nxp_c45_macsec_ability(phydev); } static int tja11xx_macsec_match_phy_device(struct phy_device *phydev, const struct phy_driver *phydrv) { - if (!phy_id_compare(phydev->phy_id, phydrv->phy_id, - phydrv->phy_id_mask)) - return 0; - - return nxp_c45_macsec_ability(phydev); + return tja11xx_phy_id_compare(phydev, phydrv) && + nxp_c45_macsec_ability(phydev); } static const struct nxp_c45_regmap tja1120_regmap = { -- cgit v1.2.3 From 8ea25274ebaf2f6be8be374633b2ed8348ec0e70 Mon Sep 17 00:00:00 2001 From: Buday Csaba Date: Thu, 7 Aug 2025 15:54:49 +0200 Subject: net: mdiobus: release reset_gpio in mdiobus_unregister_device() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit reset_gpio is claimed in mdiobus_register_device(), but it is not released in mdiobus_unregister_device(). It is instead only released when the whole MDIO bus is unregistered. When a device uses the reset_gpio property, it becomes impossible to unregister it and register it again, because the GPIO remains claimed. This patch resolves that issue. Fixes: bafbdd527d56 ("phylib: Add device reset GPIO support") # see notes Reviewed-by: Andrew Lunn Cc: Csókás Bence [ csokas.bence: Resolve rebase conflict and clarify msg ] Signed-off-by: Buday Csaba Link: https://patch.msgid.link/20250807135449.254254-2-csokas.bence@prolan.hu Signed-off-by: Paolo Abeni --- drivers/net/phy/mdio_bus.c | 1 + drivers/net/phy/mdio_bus_provider.c | 3 --- 2 files changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index fda2e27c1810..cad6ed3aa10b 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -91,6 +91,7 @@ int mdiobus_unregister_device(struct mdio_device *mdiodev) if (mdiodev->bus->mdio_map[mdiodev->addr] != mdiodev) return -EINVAL; + gpiod_put(mdiodev->reset_gpio); reset_control_put(mdiodev->reset_ctrl); mdiodev->bus->mdio_map[mdiodev->addr] = NULL; diff --git a/drivers/net/phy/mdio_bus_provider.c b/drivers/net/phy/mdio_bus_provider.c index 48dc4bf85125..f43973e73ea3 100644 --- a/drivers/net/phy/mdio_bus_provider.c +++ b/drivers/net/phy/mdio_bus_provider.c @@ -443,9 +443,6 @@ void mdiobus_unregister(struct mii_bus *bus) if (!mdiodev) continue; - if (mdiodev->reset_gpio) - gpiod_put(mdiodev->reset_gpio); - mdiodev->device_remove(mdiodev); mdiodev->device_free(mdiodev); } -- cgit v1.2.3 From 4cc339ce482ba78589a2d5cbe1c84b735d263383 Mon Sep 17 00:00:00 2001 From: Yao Zi Date: Fri, 8 Aug 2025 09:36:55 +0000 Subject: net: stmmac: thead: Get and enable APB clock on initialization It's necessary to adjust the MAC TX clock when the linkspeed changes, but it's noted such adjustment always fails on TH1520 SoC, and reading back from APB glue registers that control clock generation results in garbage, causing broken link. With some testing, it's found a clock must be ungated for access to APB glue registers. Without any consumer, the clock is automatically disabled during late kernel startup. Let's get and enable it if it's described in devicetree. For backward compatibility with older devicetrees, probing won't fail if the APB clock isn't found. In this case, we emit a warning since the link will break if the speed changes. Fixes: 33a1a01e3afa ("net: stmmac: Add glue layer for T-HEAD TH1520 SoC") Signed-off-by: Yao Zi Tested-by: Drew Fustini Reviewed-by: Drew Fustini Link: https://patch.msgid.link/20250808093655.48074-4-ziyao@disroot.org Signed-off-by: Paolo Abeni --- drivers/net/ethernet/stmicro/stmmac/dwmac-thead.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-thead.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-thead.c index c72ee759aae5..f2946bea0bc2 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-thead.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-thead.c @@ -211,6 +211,7 @@ static int thead_dwmac_probe(struct platform_device *pdev) struct stmmac_resources stmmac_res; struct plat_stmmacenet_data *plat; struct thead_dwmac *dwmac; + struct clk *apb_clk; void __iomem *apb; int ret; @@ -224,6 +225,19 @@ static int thead_dwmac_probe(struct platform_device *pdev) return dev_err_probe(&pdev->dev, PTR_ERR(plat), "dt configuration failed\n"); + /* + * The APB clock is essential for accessing glue registers. However, + * old devicetrees don't describe it correctly. We continue to probe + * and emit a warning if it isn't present. + */ + apb_clk = devm_clk_get_enabled(&pdev->dev, "apb"); + if (PTR_ERR(apb_clk) == -ENOENT) + dev_warn(&pdev->dev, + "cannot get apb clock, link may break after speed changes\n"); + else if (IS_ERR(apb_clk)) + return dev_err_probe(&pdev->dev, PTR_ERR(apb_clk), + "failed to get apb clock\n"); + dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL); if (!dwmac) return -ENOMEM; -- cgit v1.2.3 From d405ec23df13e6df599f5bd965a55d13420366b8 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 12 Aug 2025 14:57:06 +0200 Subject: ACPI: processor: perflib: Move problematic pr->performance check Commit d33bd88ac0eb ("ACPI: processor: perflib: Fix initial _PPC limit application") added a pr->performance check that prevents the frequency QoS request from being added when the given processor has no performance object. Unfortunately, this causes a WARN() in freq_qos_remove_request() to trigger on an attempt to take the given CPU offline later because the frequency QoS object has not been added for it due to the missing performance object. Address this by moving the pr->performance check before calling acpi_processor_get_platform_limit() so it only prevents a limit from being set for the CPU if the performance object is not present. This way, the frequency QoS request is added as it was before the above commit and it is present all the time along with the CPU's cpufreq policy regardless of whether or not the CPU is online. Fixes: d33bd88ac0eb ("ACPI: processor: perflib: Fix initial _PPC limit application") Tested-by: Rafael J. Wysocki Cc: 5.4+ # 5.4+ Signed-off-by: Rafael J. Wysocki Link: https://patch.msgid.link/2801421.mvXUDI8C0e@rafael.j.wysocki --- drivers/acpi/processor_perflib.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c index 755003bf3a45..8972446b7162 100644 --- a/drivers/acpi/processor_perflib.c +++ b/drivers/acpi/processor_perflib.c @@ -180,7 +180,7 @@ void acpi_processor_ppc_init(struct cpufreq_policy *policy) struct acpi_processor *pr = per_cpu(processors, cpu); int ret; - if (!pr || !pr->performance) + if (!pr) continue; /* @@ -197,6 +197,9 @@ void acpi_processor_ppc_init(struct cpufreq_policy *policy) pr_err("Failed to add freq constraint for CPU%d (%d)\n", cpu, ret); + if (!pr->performance) + continue; + ret = acpi_processor_get_platform_limit(pr); if (ret) pr_err("Failed to update freq constraint for CPU%d (%d)\n", -- cgit v1.2.3 From 56bdf7270ff4f870e2d4bfacdc00161e766dba2d Mon Sep 17 00:00:00 2001 From: David Thompson Date: Mon, 11 Aug 2025 13:50:44 -0400 Subject: Revert "gpio: mlxbf3: only get IRQ for device instance 0" This reverts commit 10af0273a35ab4513ca1546644b8c853044da134. While this change was merged, it is not the preferred solution. During review of a similar change to the gpio-mlxbf2 driver, the use of "platform_get_irq_optional" was identified as the preferred solution, so let's use it for gpio-mlxbf3 driver as well. Cc: stable@vger.kernel.org Fixes: 10af0273a35a ("gpio: mlxbf3: only get IRQ for device instance 0") Signed-off-by: David Thompson Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/8d2b630c71b3742f2c74242cf7d602706a6108e6.1754928650.git.davthompson@nvidia.com Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-mlxbf3.c | 54 ++++++++++++++++------------------------------ 1 file changed, 19 insertions(+), 35 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-mlxbf3.c b/drivers/gpio/gpio-mlxbf3.c index 9875e34bde72..10ea71273c89 100644 --- a/drivers/gpio/gpio-mlxbf3.c +++ b/drivers/gpio/gpio-mlxbf3.c @@ -190,9 +190,7 @@ static int mlxbf3_gpio_probe(struct platform_device *pdev) struct mlxbf3_gpio_context *gs; struct gpio_irq_chip *girq; struct gpio_chip *gc; - char *colon_ptr; int ret, irq; - long num; gs = devm_kzalloc(dev, sizeof(*gs), GFP_KERNEL); if (!gs) @@ -229,39 +227,25 @@ static int mlxbf3_gpio_probe(struct platform_device *pdev) gc->owner = THIS_MODULE; gc->add_pin_ranges = mlxbf3_gpio_add_pin_ranges; - colon_ptr = strchr(dev_name(dev), ':'); - if (!colon_ptr) { - dev_err(dev, "invalid device name format\n"); - return -EINVAL; - } - - ret = kstrtol(++colon_ptr, 16, &num); - if (ret) { - dev_err(dev, "invalid device instance\n"); - return ret; - } - - if (!num) { - irq = platform_get_irq(pdev, 0); - if (irq >= 0) { - girq = &gs->gc.irq; - gpio_irq_chip_set_chip(girq, &gpio_mlxbf3_irqchip); - girq->default_type = IRQ_TYPE_NONE; - /* This will let us handle the parent IRQ in the driver */ - girq->num_parents = 0; - girq->parents = NULL; - girq->parent_handler = NULL; - girq->handler = handle_bad_irq; - - /* - * Directly request the irq here instead of passing - * a flow-handler because the irq is shared. - */ - ret = devm_request_irq(dev, irq, mlxbf3_gpio_irq_handler, - IRQF_SHARED, dev_name(dev), gs); - if (ret) - return dev_err_probe(dev, ret, "failed to request IRQ"); - } + irq = platform_get_irq(pdev, 0); + if (irq >= 0) { + girq = &gs->gc.irq; + gpio_irq_chip_set_chip(girq, &gpio_mlxbf3_irqchip); + girq->default_type = IRQ_TYPE_NONE; + /* This will let us handle the parent IRQ in the driver */ + girq->num_parents = 0; + girq->parents = NULL; + girq->parent_handler = NULL; + girq->handler = handle_bad_irq; + + /* + * Directly request the irq here instead of passing + * a flow-handler because the irq is shared. + */ + ret = devm_request_irq(dev, irq, mlxbf3_gpio_irq_handler, + IRQF_SHARED, dev_name(dev), gs); + if (ret) + return dev_err_probe(dev, ret, "failed to request IRQ"); } platform_set_drvdata(pdev, gs); -- cgit v1.2.3 From 810bd9066fb1871b8a9528f31f2fdbf2a8b73bf2 Mon Sep 17 00:00:00 2001 From: David Thompson Date: Mon, 11 Aug 2025 13:50:45 -0400 Subject: gpio: mlxbf3: use platform_get_irq_optional() The gpio-mlxbf3 driver interfaces with two GPIO controllers, device instance 0 and 1. There is a single IRQ resource shared between the two controllers, and it is found in the ACPI table for device instance 0. The driver should not use platform_get_irq(), otherwise this error is logged when probing instance 1: mlxbf3_gpio MLNXBF33:01: error -ENXIO: IRQ index 0 not found Cc: stable@vger.kernel.org Fixes: cd33f216d241 ("gpio: mlxbf3: Add gpio driver support") Signed-off-by: David Thompson Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/ce70b98a201ce82b9df9aa80ac7a5eeaa2268e52.1754928650.git.davthompson@nvidia.com Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-mlxbf3.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-mlxbf3.c b/drivers/gpio/gpio-mlxbf3.c index 10ea71273c89..ed29b07d16c1 100644 --- a/drivers/gpio/gpio-mlxbf3.c +++ b/drivers/gpio/gpio-mlxbf3.c @@ -227,7 +227,7 @@ static int mlxbf3_gpio_probe(struct platform_device *pdev) gc->owner = THIS_MODULE; gc->add_pin_ranges = mlxbf3_gpio_add_pin_ranges; - irq = platform_get_irq(pdev, 0); + irq = platform_get_irq_optional(pdev, 0); if (irq >= 0) { girq = &gs->gc.irq; gpio_irq_chip_set_chip(girq, &gpio_mlxbf3_irqchip); -- cgit v1.2.3 From 9d7a1cbebbb691891671def57407ba2f8ee914e8 Mon Sep 17 00:00:00 2001 From: Matthew Auld Date: Thu, 31 Jul 2025 10:38:09 +0100 Subject: drm/xe/migrate: prevent infinite recursion If the buf + offset is not aligned to XE_CAHELINE_BYTES we fallback to using a bounce buffer. However the bounce buffer here is allocated on the stack, and the only alignment requirement here is that it's naturally aligned to u8, and not XE_CACHELINE_BYTES. If the bounce buffer is also misaligned we then recurse back into the function again, however the new bounce buffer might also not be aligned, and might never be until we eventually blow through the stack, as we keep recursing. Instead of using the stack use kmalloc, which should respect the power-of-two alignment request here. Fixes a kernel panic when triggering this path through eudebug. v2 (Stuart): - Add build bug check for power-of-two restriction - s/EINVAL/ENOMEM/ Fixes: 270172f64b11 ("drm/xe: Update xe_ttm_access_memory to use GPU for non-visible access") Signed-off-by: Matthew Auld Cc: Maciej Patelczyk Cc: Stuart Summers Cc: Matthew Brost Reviewed-by: Stuart Summers Link: https://lore.kernel.org/r/20250731093807.207572-6-matthew.auld@intel.com (cherry picked from commit 38b34e928a08ba594c4bbf7118aa3aadacd62fff) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/xe/xe_migrate.c | 29 +++++++++++++++++------------ 1 file changed, 17 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/xe/xe_migrate.c b/drivers/gpu/drm/xe/xe_migrate.c index ba1cff2e4cda..6193e2ca3741 100644 --- a/drivers/gpu/drm/xe/xe_migrate.c +++ b/drivers/gpu/drm/xe/xe_migrate.c @@ -1820,15 +1820,19 @@ int xe_migrate_access_memory(struct xe_migrate *m, struct xe_bo *bo, if (!IS_ALIGNED(len, XE_CACHELINE_BYTES) || !IS_ALIGNED((unsigned long)buf + offset, XE_CACHELINE_BYTES)) { int buf_offset = 0; + void *bounce; + int err; + + BUILD_BUG_ON(!is_power_of_2(XE_CACHELINE_BYTES)); + bounce = kmalloc(XE_CACHELINE_BYTES, GFP_KERNEL); + if (!bounce) + return -ENOMEM; /* * Less than ideal for large unaligned access but this should be * fairly rare, can fixup if this becomes common. */ do { - u8 bounce[XE_CACHELINE_BYTES]; - void *ptr = (void *)bounce; - int err; int copy_bytes = min_t(int, bytes_left, XE_CACHELINE_BYTES - (offset & XE_CACHELINE_MASK)); @@ -1837,22 +1841,22 @@ int xe_migrate_access_memory(struct xe_migrate *m, struct xe_bo *bo, err = xe_migrate_access_memory(m, bo, offset & ~XE_CACHELINE_MASK, - (void *)ptr, - sizeof(bounce), 0); + bounce, + XE_CACHELINE_BYTES, 0); if (err) - return err; + break; if (write) { - memcpy(ptr + ptr_offset, buf + buf_offset, copy_bytes); + memcpy(bounce + ptr_offset, buf + buf_offset, copy_bytes); err = xe_migrate_access_memory(m, bo, offset & ~XE_CACHELINE_MASK, - (void *)ptr, - sizeof(bounce), write); + bounce, + XE_CACHELINE_BYTES, write); if (err) - return err; + break; } else { - memcpy(buf + buf_offset, ptr + ptr_offset, + memcpy(buf + buf_offset, bounce + ptr_offset, copy_bytes); } @@ -1861,7 +1865,8 @@ int xe_migrate_access_memory(struct xe_migrate *m, struct xe_bo *bo, offset += copy_bytes; } while (bytes_left); - return 0; + kfree(bounce); + return err; } dma_addr = xe_migrate_dma_map(xe, buf, len + page_offset, write); -- cgit v1.2.3 From 4126cb327a2e3273c81fcef1c594c5b7b645c44c Mon Sep 17 00:00:00 2001 From: Matthew Auld Date: Thu, 31 Jul 2025 10:38:10 +0100 Subject: drm/xe/migrate: don't overflow max copy size With non-page aligned copy, we need to use 4 byte aligned pitch, however the size itself might still be close to our maximum of ~8M, and so the dimensions of the copy can easily exceed the S16_MAX limit of the copy command leading to the following assert: xe 0000:03:00.0: [drm] Assertion `size / pitch <= ((s16)(((u16)~0U) >> 1))` failed! platform: BATTLEMAGE subplatform: 1 graphics: Xe2_HPG 20.01 step A0 media: Xe2_HPM 13.01 step A1 tile: 0 VRAM 10.0 GiB GT: 0 type 1 WARNING: CPU: 23 PID: 10605 at drivers/gpu/drm/xe/xe_migrate.c:673 emit_copy+0x4b5/0x4e0 [xe] To fix this account for the pitch when calculating the number of current bytes to copy. Fixes: 270172f64b11 ("drm/xe: Update xe_ttm_access_memory to use GPU for non-visible access") Signed-off-by: Matthew Auld Cc: Maciej Patelczyk Cc: Matthew Brost Reviewed-by: Stuart Summers Link: https://lore.kernel.org/r/20250731093807.207572-7-matthew.auld@intel.com (cherry picked from commit 8c2d61e0e916e077fda7e7b8e67f25ffe0f361fc) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/xe/xe_migrate.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/xe/xe_migrate.c b/drivers/gpu/drm/xe/xe_migrate.c index 6193e2ca3741..95bcaa427d26 100644 --- a/drivers/gpu/drm/xe/xe_migrate.c +++ b/drivers/gpu/drm/xe/xe_migrate.c @@ -1887,6 +1887,12 @@ int xe_migrate_access_memory(struct xe_migrate *m, struct xe_bo *bo, else current_bytes = min_t(int, bytes_left, cursor.size); + if (current_bytes & ~PAGE_MASK) { + int pitch = 4; + + current_bytes = min_t(int, current_bytes, S16_MAX * pitch); + } + if (fence) dma_fence_put(fence); -- cgit v1.2.3 From 145832fbdd17b1d77ffd6cdd1642259e101d1b7e Mon Sep 17 00:00:00 2001 From: Matthew Auld Date: Thu, 31 Jul 2025 10:38:11 +0100 Subject: drm/xe/migrate: prevent potential UAF If we hit the error path, the previous fence (if there is one) has already been put() prior to this, so doing a fence_wait could lead to UAF. Tweak the flow to do to the put() until after we do the wait. Fixes: 270172f64b11 ("drm/xe: Update xe_ttm_access_memory to use GPU for non-visible access") Signed-off-by: Matthew Auld Cc: Maciej Patelczyk Cc: Matthew Brost Reviewed-by: Stuart Summers Link: https://lore.kernel.org/r/20250731093807.207572-8-matthew.auld@intel.com (cherry picked from commit 9b7ca35ed28fe5fad86e9d9c24ebd1271e4c9c3e) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/xe/xe_migrate.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/xe/xe_migrate.c b/drivers/gpu/drm/xe/xe_migrate.c index 95bcaa427d26..7d20ac4bb633 100644 --- a/drivers/gpu/drm/xe/xe_migrate.c +++ b/drivers/gpu/drm/xe/xe_migrate.c @@ -1893,9 +1893,6 @@ int xe_migrate_access_memory(struct xe_migrate *m, struct xe_bo *bo, current_bytes = min_t(int, current_bytes, S16_MAX * pitch); } - if (fence) - dma_fence_put(fence); - __fence = xe_migrate_vram(m, current_bytes, (unsigned long)buf & ~PAGE_MASK, dma_addr + current_page, @@ -1903,11 +1900,15 @@ int xe_migrate_access_memory(struct xe_migrate *m, struct xe_bo *bo, XE_MIGRATE_COPY_TO_VRAM : XE_MIGRATE_COPY_TO_SRAM); if (IS_ERR(__fence)) { - if (fence) + if (fence) { dma_fence_wait(fence, false); + dma_fence_put(fence); + } fence = __fence; goto out_err; } + + dma_fence_put(fence); fence = __fence; buf += current_bytes; -- cgit v1.2.3 From 2dd7a47669ae6c1da18c55f8e89c4a44418c7006 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Thomas=20Hellstr=C3=B6m?= Date: Tue, 5 Aug 2025 09:48:42 +0200 Subject: drm/xe: Defer buffer object shrinker write-backs and GPU waits MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When the xe buffer-object shrinker allows GPU waits and write-back, (typically from kswapd), perform multiple passes, skipping subsequent passes if the shrinker number of scanned objects target is reached. 1) Without GPU waits and write-back 2) Without write-back 3) With both GPU-waits and write-back This is to avoid stalls and costly write- and readbacks unless they are really necessary. v2: - Don't test for scan completion twice. (Stuart Summers) - Update tags. Reported-by: melvyn Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/5557 Cc: Summers Stuart Fixes: 00c8efc3180f ("drm/xe: Add a shrinker for xe bos") Cc: # v6.15+ Signed-off-by: Thomas Hellström Reviewed-by: Stuart Summers Link: https://lore.kernel.org/r/20250805074842.11359-1-thomas.hellstrom@linux.intel.com (cherry picked from commit 80944d334182ce5eb27d00e2bf20a88bfc32dea1) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/xe/xe_shrinker.c | 51 ++++++++++++++++++++++++++++++++++++---- 1 file changed, 47 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/xe/xe_shrinker.c b/drivers/gpu/drm/xe/xe_shrinker.c index 1c3c04d52f55..90244fe59b59 100644 --- a/drivers/gpu/drm/xe/xe_shrinker.c +++ b/drivers/gpu/drm/xe/xe_shrinker.c @@ -54,10 +54,10 @@ xe_shrinker_mod_pages(struct xe_shrinker *shrinker, long shrinkable, long purgea write_unlock(&shrinker->lock); } -static s64 xe_shrinker_walk(struct xe_device *xe, - struct ttm_operation_ctx *ctx, - const struct xe_bo_shrink_flags flags, - unsigned long to_scan, unsigned long *scanned) +static s64 __xe_shrinker_walk(struct xe_device *xe, + struct ttm_operation_ctx *ctx, + const struct xe_bo_shrink_flags flags, + unsigned long to_scan, unsigned long *scanned) { unsigned int mem_type; s64 freed = 0, lret; @@ -93,6 +93,48 @@ static s64 xe_shrinker_walk(struct xe_device *xe, return freed; } +/* + * Try shrinking idle objects without writeback first, then if not sufficient, + * try also non-idle objects and finally if that's not sufficient either, + * add writeback. This avoids stalls and explicit writebacks with light or + * moderate memory pressure. + */ +static s64 xe_shrinker_walk(struct xe_device *xe, + struct ttm_operation_ctx *ctx, + const struct xe_bo_shrink_flags flags, + unsigned long to_scan, unsigned long *scanned) +{ + bool no_wait_gpu = true; + struct xe_bo_shrink_flags save_flags = flags; + s64 lret, freed; + + swap(no_wait_gpu, ctx->no_wait_gpu); + save_flags.writeback = false; + lret = __xe_shrinker_walk(xe, ctx, save_flags, to_scan, scanned); + swap(no_wait_gpu, ctx->no_wait_gpu); + if (lret < 0 || *scanned >= to_scan) + return lret; + + freed = lret; + if (!ctx->no_wait_gpu) { + lret = __xe_shrinker_walk(xe, ctx, save_flags, to_scan, scanned); + if (lret < 0) + return lret; + freed += lret; + if (*scanned >= to_scan) + return freed; + } + + if (flags.writeback) { + lret = __xe_shrinker_walk(xe, ctx, flags, to_scan, scanned); + if (lret < 0) + return lret; + freed += lret; + } + + return freed; +} + static unsigned long xe_shrinker_count(struct shrinker *shrink, struct shrink_control *sc) { @@ -199,6 +241,7 @@ static unsigned long xe_shrinker_scan(struct shrinker *shrink, struct shrink_con runtime_pm = xe_shrinker_runtime_pm_get(shrinker, true, 0, can_backup); shrink_flags.purge = false; + lret = xe_shrinker_walk(shrinker->xe, &ctx, shrink_flags, nr_to_scan, &nr_scanned); if (lret >= 0) -- cgit v1.2.3 From 55d49f06162e45686399df4ae6292167f0deab7c Mon Sep 17 00:00:00 2001 From: Karthik Poosa Date: Sat, 9 Aug 2025 00:23:10 +0530 Subject: drm/xe/hwmon: Add SW clamp for power limits writes Clamp writes to power limits powerX_crit/currX_crit, powerX_cap, powerX_max, to the maximum supported by the pcode mailbox when sysfs-provided values exceed this limit. Although the pcode already performs clamping, values beyond the pcode mailbox's supported range get truncated, leading to incorrect critical power settings. This patch ensures proper clamping to prevent such truncation. v2: - Address below review comments. (Riana) - Split comments into multiple sentences. - Use local variables for readability. - Add a debug log. - Use u64 instead of unsigned long. v3: - Change drm_dbg logs to drm_info. (Badal) v4: - Rephrase the drm_info log. (Rodrigo, Riana) - Rename variable max_mbx_power_limit to max_supp_power_limit, as limit is same for platforms with and without mailbox power limit support. Signed-off-by: Karthik Poosa Fixes: 92d44a422d0d ("drm/xe/hwmon: Expose card reactive critical power") Fixes: fb1b70607f73 ("drm/xe/hwmon: Expose power attributes") Reviewed-by: Riana Tauro Link: https://lore.kernel.org/r/20250808185310.3466529-1-karthik.poosa@intel.com Signed-off-by: Rodrigo Vivi (cherry picked from commit d301eb950da59f962bafe874cf5eb6d61a85b2c2) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/xe/xe_hwmon.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/xe/xe_hwmon.c b/drivers/gpu/drm/xe/xe_hwmon.c index f08fc4377d25..c17ed1ae8649 100644 --- a/drivers/gpu/drm/xe/xe_hwmon.c +++ b/drivers/gpu/drm/xe/xe_hwmon.c @@ -332,6 +332,7 @@ static int xe_hwmon_power_max_write(struct xe_hwmon *hwmon, u32 attr, int channe int ret = 0; u32 reg_val, max; struct xe_reg rapl_limit; + u64 max_supp_power_limit = 0; mutex_lock(&hwmon->hwmon_lock); @@ -356,6 +357,20 @@ static int xe_hwmon_power_max_write(struct xe_hwmon *hwmon, u32 attr, int channe goto unlock; } + /* + * If the sysfs value exceeds the maximum pcode supported power limit value, clamp it to + * the supported maximum (U12.3 format). + * This is to avoid truncation during reg_val calculation below and ensure the valid + * power limit is sent for pcode which would clamp it to card-supported value. + */ + max_supp_power_limit = ((PWR_LIM_VAL) >> hwmon->scl_shift_power) * SF_POWER; + if (value > max_supp_power_limit) { + value = max_supp_power_limit; + drm_info(&hwmon->xe->drm, + "Power limit clamped as selected %s exceeds channel %d limit\n", + PWR_ATTR_TO_STR(attr), channel); + } + /* Computation in 64-bits to avoid overflow. Round to nearest. */ reg_val = DIV_ROUND_CLOSEST_ULL((u64)value << hwmon->scl_shift_power, SF_POWER); @@ -739,9 +754,23 @@ static int xe_hwmon_power_curr_crit_write(struct xe_hwmon *hwmon, int channel, { int ret; u32 uval; + u64 max_crit_power_curr = 0; mutex_lock(&hwmon->hwmon_lock); + /* + * If the sysfs value exceeds the pcode mailbox cmd POWER_SETUP_SUBCOMMAND_WRITE_I1 + * max supported value, clamp it to the command's max (U10.6 format). + * This is to avoid truncation during uval calculation below and ensure the valid power + * limit is sent for pcode which would clamp it to card-supported value. + */ + max_crit_power_curr = (POWER_SETUP_I1_DATA_MASK >> POWER_SETUP_I1_SHIFT) * scale_factor; + if (value > max_crit_power_curr) { + value = max_crit_power_curr; + drm_info(&hwmon->xe->drm, + "Power limit clamped as selected exceeds channel %d limit\n", + channel); + } uval = DIV_ROUND_CLOSEST_ULL(value << POWER_SETUP_I1_SHIFT, scale_factor); ret = xe_hwmon_pcode_write_i1(hwmon, uval); -- cgit v1.2.3 From 963e22c084c2b6097e1e635d29c6336881f67708 Mon Sep 17 00:00:00 2001 From: Armin Wolf Date: Tue, 29 Jul 2025 08:20:38 +0200 Subject: ACPI: EC: Relax sanity check of the ECDT ID string It turns out that the ECDT table inside the ThinkBook 14 G7 IML contains a valid EC description but an invalid ID string ("_SB.PC00.LPCB.EC0"). Ignoring this ECDT based on the invalid ID string prevents the kernel from detecting the built-in touchpad, so relax the sanity check of the ID string and only reject ECDTs with empty ID strings. Reported-by: Ilya K Fixes: 7a0d59f6a913 ("ACPI: EC: Ignore ECDT tables with an invalid ID string") Signed-off-by: Armin Wolf Tested-by: Ilya K Link: https://patch.msgid.link/20250729062038.303734-1-W_Armin@gmx.de Cc: 6.16+ # 6.16+ Signed-off-by: Rafael J. Wysocki --- drivers/acpi/ec.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 75c7db8b156a..7855bbf752b1 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -2033,7 +2033,7 @@ void __init acpi_ec_ecdt_probe(void) goto out; } - if (!strstarts(ecdt_ptr->id, "\\")) { + if (!strlen(ecdt_ptr->id)) { /* * The ECDT table on some MSI notebooks contains invalid data, together * with an empty ID string (""). @@ -2042,9 +2042,13 @@ void __init acpi_ec_ecdt_probe(void) * a "fully qualified reference to the (...) embedded controller device", * so this string always has to start with a backslash. * - * By verifying this we can avoid such faulty ECDT tables in a safe way. + * However some ThinkBook machines have a ECDT table with a valid EC + * description but an invalid ID string ("_SB.PC00.LPCB.EC0"). + * + * Because of this we only check if the ID string is empty in order to + * avoid the obvious cases. */ - pr_err(FW_BUG "Ignoring ECDT due to invalid ID string \"%s\"\n", ecdt_ptr->id); + pr_err(FW_BUG "Ignoring ECDT due to empty ID string\n"); goto out; } -- cgit v1.2.3 From e67b8afcb6d86f1bc6a69e4e52cf9dcfe636f995 Mon Sep 17 00:00:00 2001 From: Frank Min Date: Tue, 5 Aug 2025 22:30:54 +0800 Subject: drm/amdgpu: Add PSP fw version check for fw reserve GFX command The fw reserved GFX command is only supported starting from PSP fw version 0x3a0e14 and 0x3b0e0d. Older versions do not support this command. Add a version guard to ensure the command is only used when the running PSP fw meets the minimum version requirement. This ensures backward compatibility and safe operation across fw revisions. Fixes: a3b7f9c306e1 ("drm/amdgpu: reclaim psp fw reservation memory region") Signed-off-by: Frank Min Reviewed-by: Hawking Zhang Signed-off-by: Alex Deucher (cherry picked from commit 065e23170a1e09bc9104b761183e59562a029619) --- drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c index 0bd51a04be79..23484317a5fa 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c @@ -1039,15 +1039,28 @@ int psp_update_fw_reservation(struct psp_context *psp) { int ret; uint64_t reserv_addr, reserv_addr_ext; - uint32_t reserv_size, reserv_size_ext; + uint32_t reserv_size, reserv_size_ext, mp0_ip_ver; struct amdgpu_device *adev = psp->adev; + mp0_ip_ver = amdgpu_ip_version(adev, MP0_HWIP, 0); + if (amdgpu_sriov_vf(psp->adev)) return 0; - if ((amdgpu_ip_version(adev, MP0_HWIP, 0) != IP_VERSION(14, 0, 2)) && - (amdgpu_ip_version(adev, MP0_HWIP, 0) != IP_VERSION(14, 0, 3))) + switch (mp0_ip_ver) { + case IP_VERSION(14, 0, 2): + if (adev->psp.sos.fw_version < 0x3b0e0d) + return 0; + break; + + case IP_VERSION(14, 0, 3): + if (adev->psp.sos.fw_version < 0x3a0e14) + return 0; + break; + + default: return 0; + } ret = psp_get_fw_reservation_info(psp, GFX_CMD_ID_FB_FW_RESERV_ADDR, &reserv_addr, &reserv_size); if (ret) -- cgit v1.2.3 From 10ef476aad1c848449934e7bec2ab2374333c7b6 Mon Sep 17 00:00:00 2001 From: YiPeng Chai Date: Tue, 12 Aug 2025 09:17:58 +0800 Subject: drm/amdgpu: fix vram reservation issue The vram block allocation flag must be cleared before making vram reservation, otherwise reserving addresses within the currently freed memory range will always fail. Fixes: c9cad937c0c5 ("drm/amdgpu: add drm buddy support to amdgpu") Signed-off-by: YiPeng Chai Reviewed-by: Hawking Zhang Signed-off-by: Alex Deucher (cherry picked from commit d38eaf27de1b8584f42d6fb3f717b7ec44b3a7a1) --- drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c index 07c936e90d8e..78f9e86ccc09 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c @@ -648,9 +648,8 @@ static void amdgpu_vram_mgr_del(struct ttm_resource_manager *man, list_for_each_entry(block, &vres->blocks, link) vis_usage += amdgpu_vram_mgr_vis_size(adev, block); - amdgpu_vram_mgr_do_reserve(man); - drm_buddy_free_list(mm, &vres->blocks, vres->flags); + amdgpu_vram_mgr_do_reserve(man); mutex_unlock(&mgr->lock); atomic64_sub(vis_usage, &mgr->vis_usage); -- cgit v1.2.3 From 040bc6d0e0e9c814c9c663f6f1544ebaff6824a8 Mon Sep 17 00:00:00 2001 From: Jack Xiao Date: Mon, 11 Aug 2025 15:20:55 +0800 Subject: drm/amdgpu: fix incorrect vm flags to map bo It should use vm flags instead of pte flags to specify bo vm attributes. Fixes: 7946340fa389 ("drm/amdgpu: Move csa related code to separate file") Signed-off-by: Jack Xiao Reviewed-by: Likun Gao Signed-off-by: Alex Deucher (cherry picked from commit b08425fa77ad2f305fe57a33dceb456be03b653f) --- drivers/gpu/drm/amd/amdgpu/amdgpu_csa.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_csa.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_csa.c index 02138aa55793..dfb6cfd83760 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_csa.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_csa.c @@ -88,8 +88,8 @@ int amdgpu_map_static_csa(struct amdgpu_device *adev, struct amdgpu_vm *vm, } r = amdgpu_vm_bo_map(adev, *bo_va, csa_addr, 0, size, - AMDGPU_PTE_READABLE | AMDGPU_PTE_WRITEABLE | - AMDGPU_PTE_EXECUTABLE); + AMDGPU_VM_PAGE_READABLE | AMDGPU_VM_PAGE_WRITEABLE | + AMDGPU_VM_PAGE_EXECUTABLE); if (r) { DRM_ERROR("failed to do bo_map on static CSA, err=%d\n", r); -- cgit v1.2.3 From aa5fc4362fac9351557eb27c745579159a2e4520 Mon Sep 17 00:00:00 2001 From: Liu01 Tong Date: Mon, 11 Aug 2025 14:52:37 +0800 Subject: drm/amdgpu: fix task hang from failed job submission during process kill MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit During process kill, drm_sched_entity_flush() will kill the vm entities. The following job submissions of this process will fail, and the resources of these jobs have not been released, nor have the fences been signalled, causing tasks to hang and timeout. Fix by check entity status in amdgpu_vm_ready() and avoid submit jobs to stopped entity. v2: add amdgpu_vm_ready() check before amdgpu_vm_clear_freed() in function amdgpu_cs_vm_handling(). Fixes: 1f02f2044bda ("drm/amdgpu: Avoid extra evict-restore process.") Signed-off-by: Liu01 Tong Signed-off-by: Lin.Cao Reviewed-by: Christian König Signed-off-by: Alex Deucher (cherry picked from commit f101c13a8720c73e67f8f9d511fbbeda95bcedb1) --- drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c | 3 +++ drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 15 +++++++++++---- 2 files changed, 14 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c index a2adaacf6adb..d3f220be2ef9 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c @@ -1139,6 +1139,9 @@ static int amdgpu_cs_vm_handling(struct amdgpu_cs_parser *p) } } + if (!amdgpu_vm_ready(vm)) + return -EINVAL; + r = amdgpu_vm_clear_freed(adev, vm, NULL); if (r) return r; diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c index 5cacf5717016..0b87798daebd 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c @@ -654,11 +654,10 @@ int amdgpu_vm_validate(struct amdgpu_device *adev, struct amdgpu_vm *vm, * Check if all VM PDs/PTs are ready for updates * * Returns: - * True if VM is not evicting. + * True if VM is not evicting and all VM entities are not stopped */ bool amdgpu_vm_ready(struct amdgpu_vm *vm) { - bool empty; bool ret; amdgpu_vm_eviction_lock(vm); @@ -666,10 +665,18 @@ bool amdgpu_vm_ready(struct amdgpu_vm *vm) amdgpu_vm_eviction_unlock(vm); spin_lock(&vm->status_lock); - empty = list_empty(&vm->evicted); + ret &= list_empty(&vm->evicted); spin_unlock(&vm->status_lock); - return ret && empty; + spin_lock(&vm->immediate.lock); + ret &= !vm->immediate.stopped; + spin_unlock(&vm->immediate.lock); + + spin_lock(&vm->delayed.lock); + ret &= !vm->delayed.stopped; + spin_unlock(&vm->delayed.lock); + + return ret; } /** -- cgit v1.2.3 From e67a0bc3ed4fd8ee1697cb6d937e2b294ec13b5e Mon Sep 17 00:00:00 2001 From: Jedrzej Jagielski Date: Thu, 3 Jul 2025 12:41:15 +0200 Subject: ixgbe: prevent from unwanted interface name changes Users of the ixgbe driver report that after adding devlink support by the commit a0285236ab93 ("ixgbe: add initial devlink support") their configs got broken due to unwanted changes of interface names. It's caused by automatic phys_port_name generation during devlink port initialization flow. To prevent from that set no_phys_port_name flag for ixgbe devlink ports. Reported-by: David Howells Closes: https://lore.kernel.org/netdev/3452224.1745518016@warthog.procyon.org.uk/ Reported-by: David Kaplan Closes: https://lore.kernel.org/netdev/LV3PR12MB92658474624CCF60220157199470A@LV3PR12MB9265.namprd12.prod.outlook.com/ Fixes: a0285236ab93 ("ixgbe: add initial devlink support") Signed-off-by: Jedrzej Jagielski Tested-by: Rinitha S (A Contingent worker at Intel) Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ixgbe/devlink/devlink.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ixgbe/devlink/devlink.c b/drivers/net/ethernet/intel/ixgbe/devlink/devlink.c index 54f1b83dfe42..d227f4d2a2d1 100644 --- a/drivers/net/ethernet/intel/ixgbe/devlink/devlink.c +++ b/drivers/net/ethernet/intel/ixgbe/devlink/devlink.c @@ -543,6 +543,7 @@ int ixgbe_devlink_register_port(struct ixgbe_adapter *adapter) attrs.flavour = DEVLINK_PORT_FLAVOUR_PHYSICAL; attrs.phys.port_number = adapter->hw.bus.func; + attrs.no_phys_port_name = 1; ixgbe_devlink_set_switch_id(adapter, &attrs.switch_id); devlink_port_attrs_set(devlink_port, &attrs); -- cgit v1.2.3 From 2efe41234dbd0a83fdb7cd38226c2f70039a2cd3 Mon Sep 17 00:00:00 2001 From: Jeongjun Park Date: Mon, 28 Jul 2025 15:26:49 +0900 Subject: ptp: prevent possible ABBA deadlock in ptp_clock_freerun() syzbot reported the following ABBA deadlock: CPU0 CPU1 ---- ---- n_vclocks_store() lock(&ptp->n_vclocks_mux) [1] (physical clock) pc_clock_adjtime() lock(&clk->rwsem) [2] (physical clock) ... ptp_clock_freerun() ptp_vclock_in_use() lock(&ptp->n_vclocks_mux) [3] (physical clock) ptp_clock_unregister() posix_clock_unregister() lock(&clk->rwsem) [4] (virtual clock) Since ptp virtual clock is registered only under ptp physical clock, both ptp_clock and posix_clock must be physical clocks for ptp_vclock_in_use() to lock &ptp->n_vclocks_mux and check ptp->n_vclocks. However, when unregistering vclocks in n_vclocks_store(), the locking ptp->n_vclocks_mux is a physical clock lock, but clk->rwsem of ptp_clock_unregister() called through device_for_each_child_reverse() is a virtual clock lock. Therefore, clk->rwsem used in CPU0 and clk->rwsem used in CPU1 are different locks, but in lockdep, a false positive occurs because the possibility of deadlock is determined through lock-class. To solve this, lock subclass annotation must be added to the posix_clock rwsem of the vclock. Reported-by: syzbot+7cfb66a237c4a5fb22ad@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=7cfb66a237c4a5fb22ad Fixes: 73f37068d540 ("ptp: support ptp physical/virtual clocks conversion") Signed-off-by: Jeongjun Park Acked-by: Richard Cochran Reviewed-by: Vladimir Oltean Link: https://patch.msgid.link/20250728062649.469882-1-aha310510@gmail.com Signed-off-by: Jakub Kicinski --- drivers/ptp/ptp_private.h | 5 +++++ drivers/ptp/ptp_vclock.c | 7 +++++++ 2 files changed, 12 insertions(+) (limited to 'drivers') diff --git a/drivers/ptp/ptp_private.h b/drivers/ptp/ptp_private.h index a6aad743c282..b352df4cd3f9 100644 --- a/drivers/ptp/ptp_private.h +++ b/drivers/ptp/ptp_private.h @@ -24,6 +24,11 @@ #define PTP_DEFAULT_MAX_VCLOCKS 20 #define PTP_MAX_CHANNELS 2048 +enum { + PTP_LOCK_PHYSICAL = 0, + PTP_LOCK_VIRTUAL, +}; + struct timestamp_event_queue { struct ptp_extts_event buf[PTP_MAX_TIMESTAMPS]; int head; diff --git a/drivers/ptp/ptp_vclock.c b/drivers/ptp/ptp_vclock.c index 2fdeedd60e21..64c950456517 100644 --- a/drivers/ptp/ptp_vclock.c +++ b/drivers/ptp/ptp_vclock.c @@ -154,6 +154,11 @@ static long ptp_vclock_refresh(struct ptp_clock_info *ptp) return PTP_VCLOCK_REFRESH_INTERVAL; } +static void ptp_vclock_set_subclass(struct ptp_clock *ptp) +{ + lockdep_set_subclass(&ptp->clock.rwsem, PTP_LOCK_VIRTUAL); +} + static const struct ptp_clock_info ptp_vclock_info = { .owner = THIS_MODULE, .name = "ptp virtual clock", @@ -213,6 +218,8 @@ struct ptp_vclock *ptp_vclock_register(struct ptp_clock *pclock) return NULL; } + ptp_vclock_set_subclass(vclock->clock); + timecounter_init(&vclock->tc, &vclock->cc, 0); ptp_schedule_worker(vclock->clock, PTP_VCLOCK_REFRESH_INTERVAL); -- cgit v1.2.3 From b2cafefaf0473bafb0c3502a8530167d35e06113 Mon Sep 17 00:00:00 2001 From: Kuniyuki Iwashima Date: Tue, 12 Aug 2025 16:21:26 +0000 Subject: netdevsim: Fix wild pointer access in nsim_queue_free(). syzbot reported the splat below. [0] When nsim_queue_uninit() is called from nsim_init_netdevsim(), register_netdevice() has not been called, thus dev->dstats has not been allocated. Let's not call dev_dstats_rx_dropped_add() in such a case. [0] BUG: unable to handle page fault for address: ffff88809782c020 PF: supervisor write access in kernel mode PF: error_code(0x0002) - not-present page PGD 1b401067 P4D 1b401067 PUD 0 Oops: Oops: 0002 [#1] SMP KASAN NOPTI CPU: 3 UID: 0 PID: 8476 Comm: syz.1.251 Not tainted 6.16.0-syzkaller-06699-ge8d780dcd957 #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:local_add arch/x86/include/asm/local.h:33 [inline] RIP: 0010:u64_stats_add include/linux/u64_stats_sync.h:89 [inline] RIP: 0010:dev_dstats_rx_dropped_add include/linux/netdevice.h:3027 [inline] RIP: 0010:nsim_queue_free+0xba/0x120 drivers/net/netdevsim/netdev.c:714 Code: 07 77 6c 4a 8d 3c ed 20 7e f1 8d 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 75 46 4a 03 1c ed 20 7e f1 8d <4c> 01 63 20 be 00 02 00 00 48 8d 3d 00 00 00 00 e8 61 2f 58 fa 48 RSP: 0018:ffffc900044af150 EFLAGS: 00010286 RAX: dffffc0000000000 RBX: ffff88809782c000 RCX: 00000000000079c3 RDX: 1ffffffff1be2fc7 RSI: ffffffff8c15f380 RDI: ffffffff8df17e38 RBP: ffff88805f59d000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000 R13: 0000000000000003 R14: ffff88806ceb3d00 R15: ffffed100dfd308e FS: 0000000000000000(0000) GS:ffff88809782c000(0063) knlGS:00000000f505db40 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: ffff88809782c020 CR3: 000000006fc6a000 CR4: 0000000000352ef0 Call Trace: nsim_queue_uninit drivers/net/netdevsim/netdev.c:993 [inline] nsim_init_netdevsim drivers/net/netdevsim/netdev.c:1049 [inline] nsim_create+0xd0a/0x1260 drivers/net/netdevsim/netdev.c:1101 __nsim_dev_port_add+0x435/0x7d0 drivers/net/netdevsim/dev.c:1438 nsim_dev_port_add_all drivers/net/netdevsim/dev.c:1494 [inline] nsim_dev_reload_create drivers/net/netdevsim/dev.c:1546 [inline] nsim_dev_reload_up+0x5b8/0x860 drivers/net/netdevsim/dev.c:1003 devlink_reload+0x322/0x7c0 net/devlink/dev.c:474 devlink_nl_reload_doit+0xe31/0x1410 net/devlink/dev.c:584 genl_family_rcv_msg_doit+0x206/0x2f0 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x55c/0x800 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x155/0x420 net/netlink/af_netlink.c:2552 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1320 [inline] netlink_unicast+0x5aa/0x870 net/netlink/af_netlink.c:1346 netlink_sendmsg+0x8d1/0xdd0 net/netlink/af_netlink.c:1896 sock_sendmsg_nosec net/socket.c:714 [inline] __sock_sendmsg net/socket.c:729 [inline] ____sys_sendmsg+0xa95/0xc70 net/socket.c:2614 ___sys_sendmsg+0x134/0x1d0 net/socket.c:2668 __sys_sendmsg+0x16d/0x220 net/socket.c:2700 do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline] __do_fast_syscall_32+0x7c/0x3a0 arch/x86/entry/syscall_32.c:306 do_fast_syscall_32+0x32/0x80 arch/x86/entry/syscall_32.c:331 entry_SYSENTER_compat_after_hwframe+0x84/0x8e RIP: 0023:0xf708e579 Code: b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d b4 26 00 00 00 00 8d b4 26 00 00 00 00 RSP: 002b:00000000f505d55c EFLAGS: 00000296 ORIG_RAX: 0000000000000172 RAX: ffffffffffffffda RBX: 0000000000000007 RCX: 0000000080000080 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000296 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Modules linked in: CR2: ffff88809782c020 Fixes: 2a68a22304f9 ("netdevsim: account dropped packet length in stats on queue free") Reported-by: syzbot+8aa80c6232008f7b957d@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/688bb9ca.a00a0220.26d0e1.0050.GAE@google.com/ Suggested-by: Jakub Kicinski Signed-off-by: Kuniyuki Iwashima Link: https://patch.msgid.link/20250812162130.4129322-1-kuniyu@google.com Signed-off-by: Jakub Kicinski --- drivers/net/netdevsim/netdev.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/netdevsim/netdev.c b/drivers/net/netdevsim/netdev.c index 39fe28af48b9..0178219f0db5 100644 --- a/drivers/net/netdevsim/netdev.c +++ b/drivers/net/netdevsim/netdev.c @@ -710,9 +710,13 @@ static struct nsim_rq *nsim_queue_alloc(void) static void nsim_queue_free(struct net_device *dev, struct nsim_rq *rq) { hrtimer_cancel(&rq->napi_timer); - local_bh_disable(); - dev_dstats_rx_dropped_add(dev, rq->skb_queue.qlen); - local_bh_enable(); + + if (rq->skb_queue.qlen) { + local_bh_disable(); + dev_dstats_rx_dropped_add(dev, rq->skb_queue.qlen); + local_bh_enable(); + } + skb_queue_purge_reason(&rq->skb_queue, SKB_DROP_REASON_QUEUE_PURGE); kfree(rq); } -- cgit v1.2.3 From 39f8fcda2088382a4aa70b258d6f7225aa386f11 Mon Sep 17 00:00:00 2001 From: David Wei Date: Tue, 12 Aug 2025 11:29:07 -0700 Subject: bnxt: fill data page pool with frags if PAGE_SIZE > BNXT_RX_PAGE_SIZE The data page pool always fills the HW rx ring with pages. On arm64 with 64K pages, this will waste _at least_ 32K of memory per entry in the rx ring. Fix by fragmenting the pages if PAGE_SIZE > BNXT_RX_PAGE_SIZE. This makes the data page pool the same as the header pool. Tested with iperf3 with a small (64 entries) rx ring to encourage buffer circulation. Fixes: cd1fafe7da1f ("eth: bnxt: add support rx side device memory TCP") Reviewed-by: Michael Chan Signed-off-by: David Wei Link: https://patch.msgid.link/20250812182907.1540755-1-dw@davidwei.uk Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 76a4c5ae8000..2800a90fba1f 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -926,15 +926,21 @@ static struct page *__bnxt_alloc_rx_page(struct bnxt *bp, dma_addr_t *mapping, static netmem_ref __bnxt_alloc_rx_netmem(struct bnxt *bp, dma_addr_t *mapping, struct bnxt_rx_ring_info *rxr, + unsigned int *offset, gfp_t gfp) { netmem_ref netmem; - netmem = page_pool_alloc_netmems(rxr->page_pool, gfp); + if (PAGE_SIZE > BNXT_RX_PAGE_SIZE) { + netmem = page_pool_alloc_frag_netmem(rxr->page_pool, offset, BNXT_RX_PAGE_SIZE, gfp); + } else { + netmem = page_pool_alloc_netmems(rxr->page_pool, gfp); + *offset = 0; + } if (!netmem) return 0; - *mapping = page_pool_get_dma_addr_netmem(netmem); + *mapping = page_pool_get_dma_addr_netmem(netmem) + *offset; return netmem; } @@ -1029,7 +1035,7 @@ static int bnxt_alloc_rx_netmem(struct bnxt *bp, struct bnxt_rx_ring_info *rxr, dma_addr_t mapping; netmem_ref netmem; - netmem = __bnxt_alloc_rx_netmem(bp, &mapping, rxr, gfp); + netmem = __bnxt_alloc_rx_netmem(bp, &mapping, rxr, &offset, gfp); if (!netmem) return -ENOMEM; -- cgit v1.2.3 From 4faff70959d51078f9ee8372f8cff0d7045e4114 Mon Sep 17 00:00:00 2001 From: Xu Yang Date: Mon, 11 Aug 2025 17:29:31 +0800 Subject: net: usb: asix_devices: add phy_mask for ax88772 mdio bus Without setting phy_mask for ax88772 mdio bus, current driver may create at most 32 mdio phy devices with phy address range from 0x00 ~ 0x1f. DLink DUB-E100 H/W Ver B1 is such a device. However, only one main phy device will bind to net phy driver. This is creating issue during system suspend/resume since phy_polling_mode() in phy_state_machine() will directly deference member of phydev->drv for non-main phy devices. Then NULL pointer dereference issue will occur. Due to only external phy or internal phy is necessary, add phy_mask for ax88772 mdio bus to workarnoud the issue. Closes: https://lore.kernel.org/netdev/20250806082931.3289134-1-xu.yang_2@nxp.com Fixes: e532a096be0e ("net: usb: asix: ax88772: add phylib support") Cc: stable@vger.kernel.org Signed-off-by: Xu Yang Tested-by: Oleksij Rempel Reviewed-by: Oleksij Rempel Link: https://patch.msgid.link/20250811092931.860333-1-xu.yang_2@nxp.com Signed-off-by: Paolo Abeni --- drivers/net/usb/asix_devices.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c index 9b0318fb50b5..d9f5942ccc44 100644 --- a/drivers/net/usb/asix_devices.c +++ b/drivers/net/usb/asix_devices.c @@ -676,6 +676,7 @@ static int ax88772_init_mdio(struct usbnet *dev) priv->mdio->read = &asix_mdio_bus_read; priv->mdio->write = &asix_mdio_bus_write; priv->mdio->name = "Asix MDIO Bus"; + priv->mdio->phy_mask = ~(BIT(priv->phy_addr) | BIT(AX_EMBD_PHY_ADDR)); /* mii bus name is usb-- */ snprintf(priv->mdio->id, MII_BUS_ID_SIZE, "usb-%03d:%03d", dev->udev->bus->busnum, dev->udev->devnum); -- cgit v1.2.3 From 35f6bedccf4c4280f02d48e4f7d194e64e9a62d8 Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Wed, 13 Aug 2025 18:08:53 +0900 Subject: ata: libata-eh: Fix link state check for IDE/PATA ports Commit 4371fe1ba400 ("ata: libata-eh: Avoid unnecessary resets when revalidating devices") replaced the call to ata_phys_link_offline() in ata_eh_revalidate_and_attach() with the new function ata_eh_link_established() which relaxes the checks on a device link state to account for low power mode transitions. However, this change assumed that the device port has a valid scr_read method to obtain the SStatus register for the port. This is not always the case, especially with older IDE/PATA adapters (e.g. PATA/IDE devices emulated with QEMU). For such adapter, ata_eh_link_established() will always return false, causing ata_eh_revalidate_and_attach() to go into its error path and ultimately to the device being disabled. Avoid this by restoring the previous behavior, which is to assume that the link is online if reading the port SStatus register fails. While at it, also fix the spelling of SStatus in the comment describing the function ata_eh_link_established(). Reported-by: Shin'ichiro Kawasaki Fixes: 4371fe1ba400 ("ata: libata-eh: Avoid unnecessary resets when revalidating devices") Signed-off-by: Damien Le Moal Tested-by: Shin'ichiro Kawasaki Reviewed-by: Niklas Cassel --- drivers/ata/libata-eh.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 2946ae6d4b2c..2586e77ebf45 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -2075,7 +2075,7 @@ out: * Check if a link is established. This is a relaxed version of * ata_phys_link_online() which accounts for the fact that this is potentially * called after changing the link power management policy, which may not be - * reflected immediately in the SSTAUS register (e.g., we may still be seeing + * reflected immediately in the SStatus register (e.g., we may still be seeing * the PHY in partial, slumber or devsleep Partial power management state. * So check that: * - A device is still present, that is, DET is 1h (Device presence detected @@ -2089,8 +2089,13 @@ static bool ata_eh_link_established(struct ata_link *link) u32 sstatus; u8 det, ipm; + /* + * For old IDE/PATA adapters that do not have a valid scr_read method, + * or if reading the SStatus register fails, assume that the device is + * present. Device probe will determine if that is really the case. + */ if (sata_scr_read(link, SCR_STATUS, &sstatus)) - return false; + return true; det = sstatus & 0x0f; ipm = (sstatus >> 8) & 0x0f; -- cgit v1.2.3 From 58768b0563916ddcb73d8ed26ede664915f8df31 Mon Sep 17 00:00:00 2001 From: Igor Pylypiv Date: Wed, 13 Aug 2025 19:22:56 -0700 Subject: ata: libata-scsi: Fix CDL control Delete extra checks for the ATA_DFLAG_CDL_ENABLED flag that prevent SET FEATURES command from being issued to a drive when NCQ commands are active. ata_mselect_control_ata_feature() sets / clears the ATA_DFLAG_CDL_ENABLED flag during the translation of MODE SELECT to SET FEATURES. If SET FEATURES gets deferred due to outstanding NCQ commands, the original MODE SELECT command will be re-queued. When the re-queued MODE SELECT goes through the ata_mselect_control_ata_feature() translation again, SET FEATURES will not be issued because ATA_DFLAG_CDL_ENABLED has been already set or cleared by the initial translation of MODE SELECT. The ATA_DFLAG_CDL_ENABLED checks in ata_mselect_control_ata_feature() are safe to remove because scsi_cdl_enable() implements a similar logic that avoids enabling CDL if it has been enabled already. Fixes: 17e897a45675 ("ata: libata-scsi: Improve CDL control") Cc: stable@vger.kernel.org Signed-off-by: Igor Pylypiv Reviewed-by: Niklas Cassel Signed-off-by: Damien Le Moal --- drivers/ata/libata-scsi.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 57f674f51b0c..2ded5e476d6e 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -3904,21 +3904,16 @@ static int ata_mselect_control_ata_feature(struct ata_queued_cmd *qc, /* Check cdl_ctrl */ switch (buf[0] & 0x03) { case 0: - /* Disable CDL if it is enabled */ - if (!(dev->flags & ATA_DFLAG_CDL_ENABLED)) - return 0; + /* Disable CDL */ ata_dev_dbg(dev, "Disabling CDL\n"); cdl_action = 0; dev->flags &= ~ATA_DFLAG_CDL_ENABLED; break; case 0x02: /* - * Enable CDL if not already enabled. Since this is mutually - * exclusive with NCQ priority, allow this only if NCQ priority - * is disabled. + * Enable CDL. Since CDL is mutually exclusive with NCQ + * priority, allow this only if NCQ priority is disabled. */ - if (dev->flags & ATA_DFLAG_CDL_ENABLED) - return 0; if (dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLED) { ata_dev_err(dev, "NCQ priority must be disabled to enable CDL\n"); -- cgit v1.2.3 From 94eae6ee4c2df2031bca586405e9ec36e0b9ccf8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Micha=C5=82=20Winiarski?= Date: Tue, 27 May 2025 14:06:37 +0200 Subject: drm/xe/pf: Set VF LMEM BAR size MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit LMEM is partitioned between multiple VFs and we expect that the more VFs we have, the less LMEM is assigned to each VF. This means that we can achieve full LMEM BAR access without the need to attempt full VF LMEM BAR resize via pci_resize_resource(). Always try to set the largest possible BAR size that allows to fit the number of enabled VFs and inform the user in case the resize attempt is not successful. Signed-off-by: Michał Winiarski Reviewed-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20250527120637.665506-7-michal.winiarski@intel.com Signed-off-by: Lucas De Marchi (cherry picked from commit 32a4d1b98e6663101fd0abfaf151c48feea7abb1) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/xe/regs/xe_bars.h | 1 + drivers/gpu/drm/xe/xe_pci_sriov.c | 22 ++++++++++++++++++++++ 2 files changed, 23 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/xe/regs/xe_bars.h b/drivers/gpu/drm/xe/regs/xe_bars.h index ce05b6ae832f..880140d6ccdc 100644 --- a/drivers/gpu/drm/xe/regs/xe_bars.h +++ b/drivers/gpu/drm/xe/regs/xe_bars.h @@ -7,5 +7,6 @@ #define GTTMMADR_BAR 0 /* MMIO + GTT */ #define LMEM_BAR 2 /* VRAM */ +#define VF_LMEM_BAR 9 /* VF VRAM */ #endif diff --git a/drivers/gpu/drm/xe/xe_pci_sriov.c b/drivers/gpu/drm/xe/xe_pci_sriov.c index 447a7867eecb..af05db07162e 100644 --- a/drivers/gpu/drm/xe/xe_pci_sriov.c +++ b/drivers/gpu/drm/xe/xe_pci_sriov.c @@ -3,6 +3,10 @@ * Copyright © 2023-2024 Intel Corporation */ +#include +#include + +#include "regs/xe_bars.h" #include "xe_assert.h" #include "xe_device.h" #include "xe_gt_sriov_pf_config.h" @@ -128,6 +132,18 @@ static void pf_engine_activity_stats(struct xe_device *xe, unsigned int num_vfs, } } +static int resize_vf_vram_bar(struct xe_device *xe, int num_vfs) +{ + struct pci_dev *pdev = to_pci_dev(xe->drm.dev); + u32 sizes; + + sizes = pci_iov_vf_bar_get_sizes(pdev, VF_LMEM_BAR, num_vfs); + if (!sizes) + return 0; + + return pci_iov_vf_bar_set_size(pdev, VF_LMEM_BAR, __fls(sizes)); +} + static int pf_enable_vfs(struct xe_device *xe, int num_vfs) { struct pci_dev *pdev = to_pci_dev(xe->drm.dev); @@ -158,6 +174,12 @@ static int pf_enable_vfs(struct xe_device *xe, int num_vfs) if (err < 0) goto failed; + if (IS_DGFX(xe)) { + err = resize_vf_vram_bar(xe, num_vfs); + if (err) + xe_sriov_info(xe, "Failed to set VF LMEM BAR size: %d\n", err); + } + err = pci_enable_sriov(pdev, num_vfs); if (err < 0) goto failed; -- cgit v1.2.3 From c08ba63078dd6046c279df37795cb77e784e1ec9 Mon Sep 17 00:00:00 2001 From: Tom Lendacky Date: Wed, 16 Jul 2025 15:41:35 -0500 Subject: virt: sev-guest: Satisfy linear mapping requirement in get_derived_key() Commit 7ffeb2fc2670 ("x86/sev: Document requirement for linear mapping of guest request buffers") added a check that requires the guest request buffers to be in the linear mapping. The get_derived_key() function was passing a buffer that was allocated on the stack, resulting in the call to snp_send_guest_request() returning an error. Update the get_derived_key() function to use an allocated buffer instead of a stack buffer. Fixes: 7ffeb2fc2670 ("x86/sev: Document requirement for linear mapping of guest request buffers") Signed-off-by: Tom Lendacky Signed-off-by: Borislav Petkov (AMD) Cc: Link: https://lore.kernel.org/9b764ca9fc79199a091aac684c4926e2080ca7a8.1752698495.git.thomas.lendacky@amd.com --- drivers/virt/coco/sev-guest/sev-guest.c | 27 ++++++++++++--------------- 1 file changed, 12 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/virt/coco/sev-guest/sev-guest.c b/drivers/virt/coco/sev-guest/sev-guest.c index d2b3ae7113ab..b01ec99106cd 100644 --- a/drivers/virt/coco/sev-guest/sev-guest.c +++ b/drivers/virt/coco/sev-guest/sev-guest.c @@ -116,13 +116,11 @@ e_free: static int get_derived_key(struct snp_guest_dev *snp_dev, struct snp_guest_request_ioctl *arg) { + struct snp_derived_key_resp *derived_key_resp __free(kfree) = NULL; struct snp_derived_key_req *derived_key_req __free(kfree) = NULL; - struct snp_derived_key_resp derived_key_resp = {0}; struct snp_msg_desc *mdesc = snp_dev->msg_desc; struct snp_guest_req req = {}; int rc, resp_len; - /* Response data is 64 bytes and max authsize for GCM is 16 bytes. */ - u8 buf[64 + 16]; if (!arg->req_data || !arg->resp_data) return -EINVAL; @@ -132,8 +130,9 @@ static int get_derived_key(struct snp_guest_dev *snp_dev, struct snp_guest_reque * response payload. Make sure that it has enough space to cover the * authtag. */ - resp_len = sizeof(derived_key_resp.data) + mdesc->ctx->authsize; - if (sizeof(buf) < resp_len) + resp_len = sizeof(derived_key_resp->data) + mdesc->ctx->authsize; + derived_key_resp = kzalloc(resp_len, GFP_KERNEL_ACCOUNT); + if (!derived_key_resp) return -ENOMEM; derived_key_req = kzalloc(sizeof(*derived_key_req), GFP_KERNEL_ACCOUNT); @@ -149,23 +148,21 @@ static int get_derived_key(struct snp_guest_dev *snp_dev, struct snp_guest_reque req.vmpck_id = mdesc->vmpck_id; req.req_buf = derived_key_req; req.req_sz = sizeof(*derived_key_req); - req.resp_buf = buf; + req.resp_buf = derived_key_resp; req.resp_sz = resp_len; req.exit_code = SVM_VMGEXIT_GUEST_REQUEST; rc = snp_send_guest_request(mdesc, &req); arg->exitinfo2 = req.exitinfo2; - if (rc) - return rc; - - memcpy(derived_key_resp.data, buf, sizeof(derived_key_resp.data)); - if (copy_to_user((void __user *)arg->resp_data, &derived_key_resp, - sizeof(derived_key_resp))) - rc = -EFAULT; + if (!rc) { + if (copy_to_user((void __user *)arg->resp_data, derived_key_resp, + sizeof(derived_key_resp->data))) + rc = -EFAULT; + } /* The response buffer contains the sensitive data, explicitly clear it. */ - memzero_explicit(buf, sizeof(buf)); - memzero_explicit(&derived_key_resp, sizeof(derived_key_resp)); + memzero_explicit(derived_key_resp, sizeof(*derived_key_resp)); + return rc; } -- cgit v1.2.3