From 308fb39a860c816be8741fe783ae7c64e9c1af5d Mon Sep 17 00:00:00 2001 From: Joseph Gasparakis Date: Wed, 22 Sep 2010 17:56:44 +0000 Subject: igb: Add support for DH89xxCC This patch adds support for the Intel(r) DH89xxCC series. The new device will be using Intel(r) i347-AT4 and Marvell(r) M88E1322 and M88E1112 PHYs. Support for these devices has also been added here. Signed-off-by: Joseph Gasparakis Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/igb/e1000_82575.c | 18 +++- drivers/net/igb/e1000_defines.h | 31 ++++++ drivers/net/igb/e1000_hw.h | 2 + drivers/net/igb/e1000_phy.c | 206 +++++++++++++++++++++++++++++++++++++--- drivers/net/igb/e1000_phy.h | 2 + drivers/net/igb/igb_main.c | 2 + 6 files changed, 247 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c index 187622f1c816..bc183f5487cb 100644 --- a/drivers/net/igb/e1000_82575.c +++ b/drivers/net/igb/e1000_82575.c @@ -132,6 +132,8 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) case E1000_DEV_ID_82580_SERDES: case E1000_DEV_ID_82580_SGMII: case E1000_DEV_ID_82580_COPPER_DUAL: + case E1000_DEV_ID_DH89XXCC_SGMII: + case E1000_DEV_ID_DH89XXCC_SERDES: mac->type = e1000_82580; break; case E1000_DEV_ID_I350_COPPER: @@ -282,10 +284,18 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) /* Verify phy id and set remaining function pointers */ switch (phy->id) { + case I347AT4_E_PHY_ID: + case M88E1112_E_PHY_ID: case M88E1111_I_PHY_ID: phy->type = e1000_phy_m88; phy->ops.get_phy_info = igb_get_phy_info_m88; - phy->ops.get_cable_length = igb_get_cable_length_m88; + + if (phy->id == I347AT4_E_PHY_ID || + phy->id == M88E1112_E_PHY_ID) + phy->ops.get_cable_length = igb_get_cable_length_m88_gen2; + else + phy->ops.get_cable_length = igb_get_cable_length_m88; + phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_m88; break; case IGP03E1000_E_PHY_ID: @@ -1058,7 +1068,11 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw) } switch (hw->phy.type) { case e1000_phy_m88: - ret_val = igb_copper_link_setup_m88(hw); + if (hw->phy.id == I347AT4_E_PHY_ID || + hw->phy.id == M88E1112_E_PHY_ID) + ret_val = igb_copper_link_setup_m88_gen2(hw); + else + ret_val = igb_copper_link_setup_m88(hw); break; case e1000_phy_igp_3: ret_val = igb_copper_link_setup_igp(hw); diff --git a/drivers/net/igb/e1000_defines.h b/drivers/net/igb/e1000_defines.h index bbd2ec308eb0..62222796a8b3 100644 --- a/drivers/net/igb/e1000_defines.h +++ b/drivers/net/igb/e1000_defines.h @@ -634,6 +634,8 @@ * E = External */ #define M88E1111_I_PHY_ID 0x01410CC0 +#define M88E1112_E_PHY_ID 0x01410C90 +#define I347AT4_E_PHY_ID 0x01410DC0 #define IGP03E1000_E_PHY_ID 0x02A80390 #define I82580_I_PHY_ID 0x015403A0 #define I350_I_PHY_ID 0x015403B0 @@ -702,6 +704,35 @@ #define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X 0x0100 #define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */ +/* Intel i347-AT4 Registers */ + +#define I347AT4_PCDL 0x10 /* PHY Cable Diagnostics Length */ +#define I347AT4_PCDC 0x15 /* PHY Cable Diagnostics Control */ +#define I347AT4_PAGE_SELECT 0x16 + +/* i347-AT4 Extended PHY Specific Control Register */ + +/* + * Number of times we will attempt to autonegotiate before downshifting if we + * are the master + */ +#define I347AT4_PSCR_DOWNSHIFT_ENABLE 0x0800 +#define I347AT4_PSCR_DOWNSHIFT_MASK 0x7000 +#define I347AT4_PSCR_DOWNSHIFT_1X 0x0000 +#define I347AT4_PSCR_DOWNSHIFT_2X 0x1000 +#define I347AT4_PSCR_DOWNSHIFT_3X 0x2000 +#define I347AT4_PSCR_DOWNSHIFT_4X 0x3000 +#define I347AT4_PSCR_DOWNSHIFT_5X 0x4000 +#define I347AT4_PSCR_DOWNSHIFT_6X 0x5000 +#define I347AT4_PSCR_DOWNSHIFT_7X 0x6000 +#define I347AT4_PSCR_DOWNSHIFT_8X 0x7000 + +/* i347-AT4 PHY Cable Diagnostics Control */ +#define I347AT4_PCDC_CABLE_LENGTH_UNIT 0x0400 /* 0=cm 1=meters */ + +/* Marvell 1112 only registers */ +#define M88E1112_VCT_DSP_DISTANCE 0x001A + /* M88EC018 Rev 2 specific DownShift settings */ #define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK 0x0E00 #define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X 0x0800 diff --git a/drivers/net/igb/e1000_hw.h b/drivers/net/igb/e1000_hw.h index cb8db78b1a05..c0b017f8d782 100644 --- a/drivers/net/igb/e1000_hw.h +++ b/drivers/net/igb/e1000_hw.h @@ -54,6 +54,8 @@ struct e1000_hw; #define E1000_DEV_ID_82580_SERDES 0x1510 #define E1000_DEV_ID_82580_SGMII 0x1511 #define E1000_DEV_ID_82580_COPPER_DUAL 0x1516 +#define E1000_DEV_ID_DH89XXCC_SGMII 0x0436 +#define E1000_DEV_ID_DH89XXCC_SERDES 0x0438 #define E1000_DEV_ID_I350_COPPER 0x1521 #define E1000_DEV_ID_I350_FIBER 0x1522 #define E1000_DEV_ID_I350_SERDES 0x1523 diff --git a/drivers/net/igb/e1000_phy.c b/drivers/net/igb/e1000_phy.c index cf1f32300923..ddd036a78999 100644 --- a/drivers/net/igb/e1000_phy.c +++ b/drivers/net/igb/e1000_phy.c @@ -569,6 +569,89 @@ out: return ret_val; } +/** + * igb_copper_link_setup_m88_gen2 - Setup m88 PHY's for copper link + * @hw: pointer to the HW structure + * + * Sets up MDI/MDI-X and polarity for i347-AT4, m88e1322 and m88e1112 PHY's. + * Also enables and sets the downshift parameters. + **/ +s32 igb_copper_link_setup_m88_gen2(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data; + + if (phy->reset_disable) { + ret_val = 0; + goto out; + } + + /* Enable CRS on Tx. This must be set for half-duplex operation. */ + ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); + if (ret_val) + goto out; + + /* + * Options: + * MDI/MDI-X = 0 (default) + * 0 - Auto for all speeds + * 1 - MDI mode + * 2 - MDI-X mode + * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes) + */ + phy_data &= ~M88E1000_PSCR_AUTO_X_MODE; + + switch (phy->mdix) { + case 1: + phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE; + break; + case 2: + phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE; + break; + case 3: + /* M88E1112 does not support this mode) */ + if (phy->id != M88E1112_E_PHY_ID) { + phy_data |= M88E1000_PSCR_AUTO_X_1000T; + break; + } + case 0: + default: + phy_data |= M88E1000_PSCR_AUTO_X_MODE; + break; + } + + /* + * Options: + * disable_polarity_correction = 0 (default) + * Automatic Correction for Reversed Cable Polarity + * 0 - Disabled + * 1 - Enabled + */ + phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL; + if (phy->disable_polarity_correction == 1) + phy_data |= M88E1000_PSCR_POLARITY_REVERSAL; + + /* Enable downshift and setting it to X6 */ + phy_data &= ~I347AT4_PSCR_DOWNSHIFT_MASK; + phy_data |= I347AT4_PSCR_DOWNSHIFT_6X; + phy_data |= I347AT4_PSCR_DOWNSHIFT_ENABLE; + + ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); + if (ret_val) + goto out; + + /* Commit the changes. */ + ret_val = igb_phy_sw_reset(hw); + if (ret_val) { + hw_dbg("Error committing the PHY changes\n"); + goto out; + } + +out: + return ret_val; +} + /** * igb_copper_link_setup_igp - Setup igp PHY's for copper link * @hw: pointer to the HW structure @@ -1124,18 +1207,25 @@ s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw) goto out; if (!link) { - /* - * We didn't get link. - * Reset the DSP and cross our fingers. - */ - ret_val = phy->ops.write_reg(hw, - M88E1000_PHY_PAGE_SELECT, - 0x001d); - if (ret_val) - goto out; - ret_val = igb_phy_reset_dsp(hw); - if (ret_val) - goto out; + if (hw->phy.type != e1000_phy_m88 || + hw->phy.id == I347AT4_E_PHY_ID || + hw->phy.id == M88E1112_E_PHY_ID) { + hw_dbg("Link taking longer than expected.\n"); + } else { + + /* + * We didn't get link. + * Reset the DSP and cross our fingers. + */ + ret_val = phy->ops.write_reg(hw, + M88E1000_PHY_PAGE_SELECT, + 0x001d); + if (ret_val) + goto out; + ret_val = igb_phy_reset_dsp(hw); + if (ret_val) + goto out; + } } /* Try once more */ @@ -1145,6 +1235,11 @@ s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw) goto out; } + if (hw->phy.type != e1000_phy_m88 || + hw->phy.id == I347AT4_E_PHY_ID || + hw->phy.id == M88E1112_E_PHY_ID) + goto out; + ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data); if (ret_val) goto out; @@ -1557,6 +1652,93 @@ out: return ret_val; } +s32 igb_get_cable_length_m88_gen2(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data, phy_data2, index, default_page, is_cm; + + switch (hw->phy.id) { + case I347AT4_E_PHY_ID: + /* Remember the original page select and set it to 7 */ + ret_val = phy->ops.read_reg(hw, I347AT4_PAGE_SELECT, + &default_page); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, 0x07); + if (ret_val) + goto out; + + /* Get cable length from PHY Cable Diagnostics Control Reg */ + ret_val = phy->ops.read_reg(hw, (I347AT4_PCDL + phy->addr), + &phy_data); + if (ret_val) + goto out; + + /* Check if the unit of cable length is meters or cm */ + ret_val = phy->ops.read_reg(hw, I347AT4_PCDC, &phy_data2); + if (ret_val) + goto out; + + is_cm = !(phy_data & I347AT4_PCDC_CABLE_LENGTH_UNIT); + + /* Populate the phy structure with cable length in meters */ + phy->min_cable_length = phy_data / (is_cm ? 100 : 1); + phy->max_cable_length = phy_data / (is_cm ? 100 : 1); + phy->cable_length = phy_data / (is_cm ? 100 : 1); + + /* Reset the page selec to its original value */ + ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, + default_page); + if (ret_val) + goto out; + break; + case M88E1112_E_PHY_ID: + /* Remember the original page select and set it to 5 */ + ret_val = phy->ops.read_reg(hw, I347AT4_PAGE_SELECT, + &default_page); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, 0x05); + if (ret_val) + goto out; + + ret_val = phy->ops.read_reg(hw, M88E1112_VCT_DSP_DISTANCE, + &phy_data); + if (ret_val) + goto out; + + index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >> + M88E1000_PSSR_CABLE_LENGTH_SHIFT; + if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) { + ret_val = -E1000_ERR_PHY; + goto out; + } + + phy->min_cable_length = e1000_m88_cable_length_table[index]; + phy->max_cable_length = e1000_m88_cable_length_table[index + 1]; + + phy->cable_length = (phy->min_cable_length + + phy->max_cable_length) / 2; + + /* Reset the page select to its original value */ + ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, + default_page); + if (ret_val) + goto out; + + break; + default: + ret_val = -E1000_ERR_PHY; + goto out; + } + +out: + return ret_val; +} + /** * igb_get_cable_length_igp_2 - Determine cable length for igp2 PHY * @hw: pointer to the HW structure diff --git a/drivers/net/igb/e1000_phy.h b/drivers/net/igb/e1000_phy.h index 565a6dbb3714..2cc117705a31 100644 --- a/drivers/net/igb/e1000_phy.h +++ b/drivers/net/igb/e1000_phy.h @@ -45,9 +45,11 @@ s32 igb_check_downshift(struct e1000_hw *hw); s32 igb_check_reset_block(struct e1000_hw *hw); s32 igb_copper_link_setup_igp(struct e1000_hw *hw); s32 igb_copper_link_setup_m88(struct e1000_hw *hw); +s32 igb_copper_link_setup_m88_gen2(struct e1000_hw *hw); s32 igb_phy_force_speed_duplex_igp(struct e1000_hw *hw); s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw); s32 igb_get_cable_length_m88(struct e1000_hw *hw); +s32 igb_get_cable_length_m88_gen2(struct e1000_hw *hw); s32 igb_get_cable_length_igp_2(struct e1000_hw *hw); s32 igb_get_phy_id(struct e1000_hw *hw); s32 igb_get_phy_info_igp(struct e1000_hw *hw); diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index fd922e7db1d5..61892b80d7ad 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -71,6 +71,8 @@ static DEFINE_PCI_DEVICE_TABLE(igb_pci_tbl) = { { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_SERDES), board_82575 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_SGMII), board_82575 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_COPPER_DUAL), board_82575 }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SGMII), board_82575 }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SERDES), board_82575 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576), board_82575 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_NS), board_82575 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_NS_SERDES), board_82575 }, -- cgit v1.2.3