From c56c81abe7e684bc6203632d807303eb765690dc Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 8 Apr 2009 15:08:23 -0700 Subject: dmatest: fix max channels handling The check for reaching max_channels is short circuited by 'continuing' after successfully adding a channel. [ Impact: make the 'max_channels' module parameter actually have an effect ] Cc: Reported-by: Dan Carpenter Signed-off-by: Dan Williams --- drivers/dma/dmatest.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c index a27c0fb1bc11..fb7da5141e96 100644 --- a/drivers/dma/dmatest.c +++ b/drivers/dma/dmatest.c @@ -531,9 +531,7 @@ static int __init dmatest_init(void) chan = dma_request_channel(mask, filter, NULL); if (chan) { err = dmatest_add_channel(chan); - if (err == 0) - continue; - else { + if (err) { dma_release_channel(chan); break; /* add_channel failed, punt */ } -- cgit v1.2.3 From 295c01f90db2b8b8394e1f7cde59b96d71f98e07 Mon Sep 17 00:00:00 2001 From: Christian Hohnstaedt Date: Sun, 12 Apr 2009 13:01:44 +0800 Subject: crypto: ixp4xx - check firmware for crypto support - the loaded firmware may not support crypto at all or only support DES and 3DES but not AES or support DES, 3DES and AES. - in case of no crypto support of the firmware, the module load will fail. - in case of missing AES support, the AES algorithms are not registered and a warning is printed during module load. Signed-off-by: Christian Hohnstaedt Signed-off-by: Herbert Xu --- drivers/crypto/ixp4xx_crypto.c | 33 ++++++++++++++++++++++++++++++++- 1 file changed, 32 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/crypto/ixp4xx_crypto.c b/drivers/crypto/ixp4xx_crypto.c index af9761ccf9f1..9224c1f49311 100644 --- a/drivers/crypto/ixp4xx_crypto.c +++ b/drivers/crypto/ixp4xx_crypto.c @@ -415,6 +415,7 @@ static void crypto_done_action(unsigned long arg) static int init_ixp_crypto(void) { int ret = -ENODEV; + u32 msg[2] = { 0, 0 }; if (! ( ~(*IXP4XX_EXP_CFG2) & (IXP4XX_FEATURE_HASH | IXP4XX_FEATURE_AES | IXP4XX_FEATURE_DES))) { @@ -426,9 +427,35 @@ static int init_ixp_crypto(void) return ret; if (!npe_running(npe_c)) { - npe_load_firmware(npe_c, npe_name(npe_c), dev); + ret = npe_load_firmware(npe_c, npe_name(npe_c), dev); + if (ret) { + return ret; + } + if (npe_recv_message(npe_c, msg, "STATUS_MSG")) + goto npe_error; + } else { + if (npe_send_message(npe_c, msg, "STATUS_MSG")) + goto npe_error; + + if (npe_recv_message(npe_c, msg, "STATUS_MSG")) + goto npe_error; } + switch ((msg[1]>>16) & 0xff) { + case 3: + printk(KERN_WARNING "Firmware of %s lacks AES support\n", + npe_name(npe_c)); + support_aes = 0; + break; + case 4: + case 5: + support_aes = 1; + break; + default: + printk(KERN_ERR "Firmware of %s lacks crypto support\n", + npe_name(npe_c)); + return -ENODEV; + } /* buffer_pool will also be used to sometimes store the hmac, * so assure it is large enough */ @@ -459,6 +486,10 @@ static int init_ixp_crypto(void) qmgr_enable_irq(RECV_QID); return 0; + +npe_error: + printk(KERN_ERR "%s not responding\n", npe_name(npe_c)); + ret = -EIO; err: if (ctx_pool) dma_pool_destroy(ctx_pool); -- cgit v1.2.3 From acd246b7494c629aa617da49716409566cf52149 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 21 Apr 2009 13:55:20 +0800 Subject: crypto: padlock - Revert aes-all alias to aes Since the padlock-aes driver doesn't require a fallback (it's only padlock-sha that does), it should use the aes alias rather than aes-all so that ones that do need a fallback can use it. Signed-off-by: Herbert Xu --- drivers/crypto/padlock-aes.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/crypto/padlock-aes.c b/drivers/crypto/padlock-aes.c index 3f0fdd18255d..856b3cc25583 100644 --- a/drivers/crypto/padlock-aes.c +++ b/drivers/crypto/padlock-aes.c @@ -489,4 +489,4 @@ MODULE_DESCRIPTION("VIA PadLock AES algorithm support"); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Michal Ludvig"); -MODULE_ALIAS("aes-all"); +MODULE_ALIAS("aes"); -- cgit v1.2.3 From 45cb50e646d1560eff01c5ad0f0df3c7fd6148dd Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Fri, 24 Apr 2009 12:13:18 -0400 Subject: ACPI video: dmi check for broken _BQC on Acer Aspire 5720 On Acer Aspire 5720, _BQC always returns a value 9 smaller than the actual brightness level. Add dmi quirk for this laptop. http://bugzilla.kernel.org/show_bug.cgi?id=13121 Tested-by: Maxim Levitsky Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/video.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'drivers') diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index cd4fb7543a90..7e8ee49ebd40 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -538,6 +538,33 @@ acpi_video_device_lcd_set_level(struct acpi_video_device *device, int level) return -EINVAL; } +/* + * For some buggy _BQC methods, we need to add a constant value to + * the _BQC return value to get the actual current brightness level + */ + +static int bqc_offset_aml_bug_workaround; +static int __init video_set_bqc_offset(const struct dmi_system_id *d) +{ + bqc_offset_aml_bug_workaround = 9; + return 0; +} + +static struct dmi_system_id video_dmi_table[] __initdata = { + /* + * Broken _BQC workaround http://bugzilla.kernel.org/show_bug.cgi?id=13121 + */ + { + .callback = video_set_bqc_offset, + .ident = "Acer Aspire 5720", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5720"), + }, + }, + {} +}; + static int acpi_video_device_lcd_get_level_current(struct acpi_video_device *device, unsigned long long *level) @@ -557,6 +584,7 @@ acpi_video_device_lcd_get_level_current(struct acpi_video_device *device, *level = device->brightness->levels[*level + 2]; } + *level += bqc_offset_aml_bug_workaround; device->brightness->curr = *level; return 0; } else { @@ -2287,6 +2315,8 @@ EXPORT_SYMBOL(acpi_video_register); static int __init acpi_video_init(void) { + dmi_check_system(video_dmi_table); + if (intel_opregion_present()) return 0; -- cgit v1.2.3 From ec6995ddaa3db2c5f028184ed9b74c0c448c4947 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Wed, 29 Apr 2009 15:15:59 -0700 Subject: RDMA/cxgb3: Don't complete flushed send work requests twice When the SQ is flushed, mark the flushed entries as not signaled so the poll logic doesn't re-insert the CQ entry thinking its an out of order completion. The bug can cause the NFS/RDMA server to crash due to processing the same completed work request twice. Signed-off-by: Steve Wise Signed-off-by: Roland Dreier --- drivers/infiniband/hw/cxgb3/cxio_hal.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/infiniband/hw/cxgb3/cxio_hal.c b/drivers/infiniband/hw/cxgb3/cxio_hal.c index 8d71086f5a1c..62f9cf2f94ec 100644 --- a/drivers/infiniband/hw/cxgb3/cxio_hal.c +++ b/drivers/infiniband/hw/cxgb3/cxio_hal.c @@ -410,6 +410,7 @@ int cxio_flush_sq(struct t3_wq *wq, struct t3_cq *cq, int count) ptr = wq->sq_rptr + count; sqp = wq->sq + Q_PTR2IDX(ptr, wq->sq_size_log2); while (ptr != wq->sq_wptr) { + sqp->signaled = 0; insert_sq_cqe(wq, cq, sqp); ptr++; sqp = wq->sq + Q_PTR2IDX(ptr, wq->sq_size_log2); -- cgit v1.2.3 From 049ef7e40fc9959db480b2753a1dbe734d98e948 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Thu, 30 Apr 2009 14:43:43 -0700 Subject: drm/i915: x86 always has writeq. Add I915_READ64 for symmetry. i386 has inline code for writeq and readq, so just use those instead of ugly macros which evaluate arguments multiple times. Signed-off-by: Keith Packard Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_drv.h | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 25065923b8a8..df08eb4240b6 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -705,13 +705,8 @@ extern void intel_modeset_cleanup(struct drm_device *dev); #define I915_WRITE16(reg, val) writel(val, dev_priv->regs + (reg)) #define I915_READ8(reg) readb(dev_priv->regs + (reg)) #define I915_WRITE8(reg, val) writeb(val, dev_priv->regs + (reg)) -#ifdef writeq #define I915_WRITE64(reg, val) writeq(val, dev_priv->regs + (reg)) -#else -#define I915_WRITE64(reg, val) (writel(val, dev_priv->regs + (reg)), \ - writel(upper_32_bits(val), dev_priv->regs + \ - (reg) + 4)) -#endif +#define I915_READ64(reg) readq(dev_priv->regs + (reg)) #define POSTING_READ(reg) (void)I915_READ(reg) #define I915_VERBOSE 0 -- cgit v1.2.3 From 79f11c19a396e8cea7dad322dcfb46c0a8517fe6 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Thu, 30 Apr 2009 14:43:44 -0700 Subject: drm/i915: save/restore fence registers across suspend/resume This makes software fallbacks not do tiling wrong on i965 and later after resume. It also should fix 945 performance reduction after resume which would have disabled tiling without causing any visible effect. Signed-off-by: Keith Packard [anholt: Fixed up the 915 case to not save/restore the new regs] Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/i915_suspend.c | 24 ++++++++++++++++++++++++ 2 files changed, 25 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index df08eb4240b6..b47af07f3918 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -283,6 +283,7 @@ typedef struct drm_i915_private { u8 saveAR[21]; u8 saveDACMASK; u8 saveCR[37]; + uint64_t saveFENCE[16]; struct { struct drm_mm gtt_space; diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index d669cc2b42c0..ce8a21344a71 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -349,6 +349,18 @@ int i915_save_state(struct drm_device *dev) for (i = 0; i < 3; i++) dev_priv->saveSWF2[i] = I915_READ(SWF30 + (i << 2)); + /* Fences */ + if (IS_I965G(dev)) { + for (i = 0; i < 16; i++) + dev_priv->saveFENCE[i] = I915_READ64(FENCE_REG_965_0 + (i * 8)); + } else { + for (i = 0; i < 8; i++) + dev_priv->saveFENCE[i] = I915_READ(FENCE_REG_830_0 + (i * 4)); + + if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) + for (i = 0; i < 8; i++) + dev_priv->saveFENCE[i+8] = I915_READ(FENCE_REG_945_8 + (i * 4)); + } i915_save_vga(dev); return 0; @@ -371,6 +383,18 @@ int i915_restore_state(struct drm_device *dev) /* Display arbitration */ I915_WRITE(DSPARB, dev_priv->saveDSPARB); + /* Fences */ + if (IS_I965G(dev)) { + for (i = 0; i < 16; i++) + I915_WRITE64(FENCE_REG_965_0 + (i * 8), dev_priv->saveFENCE[i]); + } else { + for (i = 0; i < 8; i++) + I915_WRITE(FENCE_REG_830_0 + (i * 4), dev_priv->saveFENCE[i]); + if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) + for (i = 0; i < 8; i++) + I915_WRITE(FENCE_REG_945_8 + (i * 4), dev_priv->saveFENCE[i+8]); + } + /* Pipe & plane A info */ /* Prime the clock */ if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) { -- cgit v1.2.3 From d10db3a07e38bfb1bff92c790072d85b0bcc07eb Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Thu, 23 Apr 2009 16:27:39 +0200 Subject: i2c-pxa.c: timeouts off by 1 With `while (timeout--)' timeout reaches -1 after the loop, so the tests below are off by one. Signed-off-by: Roel Kluin Acked-by: Wolfram Sang Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-pxa.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index c1405c8f6ba5..acc7143d9655 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -265,10 +265,10 @@ static int i2c_pxa_wait_bus_not_busy(struct pxa_i2c *i2c) show_state(i2c); } - if (timeout <= 0) + if (timeout < 0) show_state(i2c); - return timeout <= 0 ? I2C_RETRY : 0; + return timeout < 0 ? I2C_RETRY : 0; } static int i2c_pxa_wait_master(struct pxa_i2c *i2c) @@ -612,7 +612,7 @@ static int i2c_pxa_pio_set_master(struct pxa_i2c *i2c) show_state(i2c); } - if (timeout <= 0) { + if (timeout < 0) { show_state(i2c); dev_err(&i2c->adap.dev, "i2c_pxa: timeout waiting for bus free\n"); -- cgit v1.2.3 From 3ee59f8d0dcab2e114546038b2b224776c82b7f7 Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Thu, 30 Apr 2009 09:58:50 +0200 Subject: iwlwifi: remove EXPORT_SYMBOL for static symbol It does not make sense to apply EXPORT_SYMBOL to a static symbol. Fixes this build error: drivers/net/wireless/iwlwifi/iwl3945-base.c:1697: error: __ksymtab_iwl3945_rx_queue_reset causes a section type conflict Signed-off-by: Andreas Schwab Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl3945-base.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 70a00c8ee42e..4cce66133500 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -1744,7 +1744,6 @@ static void iwl3945_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rx rxq->bd = NULL; rxq->rb_stts = NULL; } -EXPORT_SYMBOL(iwl3945_rx_queue_free); /* Convert linear signal-to-noise ratio into dB */ -- cgit v1.2.3 From 299f5462087f3bc2141e6bc83ba7e2b15d8a07d2 Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Thu, 30 Apr 2009 13:56:31 -0700 Subject: iwlwifi: update key flags at time key is set We need to be symmetrical in what is done when key is set and cleared. This is important wrt the key flags as they are used during key clearing and if they are not set when the key is set the key cannot be cleared completely. This addresses the many occurences of the WARN found in iwl_set_tkip_dynamic_key_info() and tracked in http://www.kerneloops.org/searchweek.php?search=iwl_set_dynamic_key If calling iwl_set_tkip_dynamic_key_info()/iwl_remove_dynamic_key() pair a few times in a row will cause that we run out of key space. This is because the index stored in the key flags is used by iwl_remove_dynamic_key() to decide if it should remove the key. Unfortunately the key flags, and hence the key index is currently only set at the time the key is written to the device (in iwl_update_tkip_key()) and _not_ in iwl_set_tkip_dynamic_key_info(). Fix this by setting flags in iwl_set_tkip_dynamic_key_info(). Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-sta.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index 5798fe49c771..44ab03a12e40 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -719,6 +719,14 @@ static int iwl_set_tkip_dynamic_key_info(struct iwl_priv *priv, { unsigned long flags; int ret = 0; + __le16 key_flags = 0; + + key_flags |= (STA_KEY_FLG_TKIP | STA_KEY_FLG_MAP_KEY_MSK); + key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); + key_flags &= ~STA_KEY_FLG_INVALID; + + if (sta_id == priv->hw_params.bcast_sta_id) + key_flags |= STA_KEY_MULTICAST_MSK; keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; @@ -738,6 +746,9 @@ static int iwl_set_tkip_dynamic_key_info(struct iwl_priv *priv, WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, "no space for a new key"); + priv->stations[sta_id].sta.key.key_flags = key_flags; + + /* This copy is acutally not needed: we get the key with each TX */ memcpy(priv->stations[sta_id].keyinfo.key, keyconf->key, 16); @@ -754,9 +765,7 @@ void iwl_update_tkip_key(struct iwl_priv *priv, { u8 sta_id = IWL_INVALID_STATION; unsigned long flags; - __le16 key_flags = 0; int i; - DECLARE_MAC_BUF(mac); sta_id = iwl_find_station(priv, addr); if (sta_id == IWL_INVALID_STATION) { @@ -771,16 +780,8 @@ void iwl_update_tkip_key(struct iwl_priv *priv, return; } - key_flags |= (STA_KEY_FLG_TKIP | STA_KEY_FLG_MAP_KEY_MSK); - key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); - key_flags &= ~STA_KEY_FLG_INVALID; - - if (sta_id == priv->hw_params.bcast_sta_id) - key_flags |= STA_KEY_MULTICAST_MSK; - spin_lock_irqsave(&priv->sta_lock, flags); - priv->stations[sta_id].sta.key.key_flags = key_flags; priv->stations[sta_id].sta.key.tkip_rx_tsc_byte2 = (u8) iv32; for (i = 0; i < 5; i++) -- cgit v1.2.3 From ca50a51e890b0a62b44b5642c1ba5049909e5a8b Mon Sep 17 00:00:00 2001 From: Ben Nizette Date: Thu, 16 Apr 2009 05:54:12 +1000 Subject: ipu_idmac: Use disable_irq_nosync() from within irq handlers. disable_irq() should wait for all running handlers to complete before returning. As such, if it's used to disable an interrupt from that interrupt's handler it will deadlock. This replaces the dangerous instances with the _nosync() variant which doesn't have this problem. Note the 2 handlers in question are only used #ifdef DEBUG so I imagine these code paths don't get hit often. Signed-off-by: Ben Nizette Acked-by: Guennadi Liakhovetski Signed-off-by: Dan Williams --- drivers/dma/ipu/ipu_idmac.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c index e202a6ce5573..3a4deea78a71 100644 --- a/drivers/dma/ipu/ipu_idmac.c +++ b/drivers/dma/ipu/ipu_idmac.c @@ -1547,7 +1547,7 @@ static irqreturn_t ic_sof_irq(int irq, void *dev_id) struct idmac_channel *ichan = dev_id; printk(KERN_DEBUG "Got SOF IRQ %d on Channel %d\n", irq, ichan->dma_chan.chan_id); - disable_irq(irq); + disable_irq_nosync(irq); return IRQ_HANDLED; } @@ -1556,7 +1556,7 @@ static irqreturn_t ic_eof_irq(int irq, void *dev_id) struct idmac_channel *ichan = dev_id; printk(KERN_DEBUG "Got EOF IRQ %d on Channel %d\n", irq, ichan->dma_chan.chan_id); - disable_irq(irq); + disable_irq_nosync(irq); return IRQ_HANDLED; } -- cgit v1.2.3 From 029091df01116aff8dea89ce96a0a2534401803a Mon Sep 17 00:00:00 2001 From: "Zhang, Yanmin" Date: Thu, 30 Apr 2009 14:48:29 +0800 Subject: PCI: Fix pci-e port driver slot_reset bad default return value When an upstream port reports an AER error to root port, kernel starts error recovery procedures. The default return value of function pcie_portdrv_slot_reset is PCI_ERS_RESULT_NONE. If all port service drivers of the downstream port under the upstream port have no slot_reset method in pci_error_handlers, AER recovery would stop without resume. Below patch against 2.6.30-rc3 fixes it. Signed-off-by: Zhang Yanmin Signed-off-by: Jesse Barnes --- drivers/pci/pcie/aer/aerdrv.h | 3 +++ drivers/pci/pcie/portdrv_pci.c | 2 +- 2 files changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/pcie/aer/aerdrv.h b/drivers/pci/pcie/aer/aerdrv.h index c7ad68b6c6d6..aa14482a4779 100644 --- a/drivers/pci/pcie/aer/aerdrv.h +++ b/drivers/pci/pcie/aer/aerdrv.h @@ -95,6 +95,9 @@ struct aer_broadcast_data { static inline pci_ers_result_t merge_result(enum pci_ers_result orig, enum pci_ers_result new) { + if (new == PCI_ERS_RESULT_NONE) + return orig; + switch (orig) { case PCI_ERS_RESULT_CAN_RECOVER: case PCI_ERS_RESULT_RECOVERED: diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index b924e2463f85..091ce70051e0 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -200,7 +200,7 @@ static int slot_reset_iter(struct device *device, void *data) static pci_ers_result_t pcie_portdrv_slot_reset(struct pci_dev *dev) { - pci_ers_result_t status = PCI_ERS_RESULT_NONE; + pci_ers_result_t status = PCI_ERS_RESULT_RECOVERED; int retval; /* If fatal, restore cfg space for possible link reset at upstream */ -- cgit v1.2.3 From 77a22941f9ed052a0fdaa92753b1a1ab8072ee76 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Wed, 6 May 2009 16:43:48 -0700 Subject: igb: resolve panic on shutdown when SR-IOV is enabled The setup_rctl call was making a call into the ring structure after it had been freed. This was causing a panic on shutdown. This call wasn't necessary since it is possible to get the needed index from adapter->vfs_allocated_count. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/igb/igb_main.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 08c801490c72..e25343588fc7 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -2006,7 +2006,7 @@ static void igb_setup_rctl(struct igb_adapter *adapter) struct e1000_hw *hw = &adapter->hw; u32 rctl; u32 srrctl = 0; - int i, j; + int i; rctl = rd32(E1000_RCTL); @@ -2071,8 +2071,6 @@ static void igb_setup_rctl(struct igb_adapter *adapter) if (adapter->vfs_allocated_count) { u32 vmolr; - j = adapter->rx_ring[0].reg_idx; - /* set all queue drop enable bits */ wr32(E1000_QDE, ALL_QUEUES); srrctl |= E1000_SRRCTL_DROP_EN; @@ -2080,16 +2078,16 @@ static void igb_setup_rctl(struct igb_adapter *adapter) /* disable queue 0 to prevent tail write w/o re-config */ wr32(E1000_RXDCTL(0), 0); - vmolr = rd32(E1000_VMOLR(j)); + vmolr = rd32(E1000_VMOLR(adapter->vfs_allocated_count)); if (rctl & E1000_RCTL_LPE) vmolr |= E1000_VMOLR_LPE; - if (adapter->num_rx_queues > 0) + if (adapter->num_rx_queues > 1) vmolr |= E1000_VMOLR_RSSE; - wr32(E1000_VMOLR(j), vmolr); + wr32(E1000_VMOLR(adapter->vfs_allocated_count), vmolr); } for (i = 0; i < adapter->num_rx_queues; i++) { - j = adapter->rx_ring[i].reg_idx; + int j = adapter->rx_ring[i].reg_idx; wr32(E1000_SRRCTL(j), srrctl); } -- cgit v1.2.3 From 581daf7e00c5e766f26aff80a61a860a17b0d75a Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Wed, 6 May 2009 16:46:47 -0700 Subject: bnx2: Fix panic in bnx2_poll_work(). Add barrier() to bnx2_get_hw_{tx|rx}_cons() to fix this issue: http://bugzilla.kernel.org/show_bug.cgi?id=12698 This issue was reported by multiple i386 users. Without barrier(), the compiled code looks like the following where %eax contains the address of the tx_cons or rx_cons in the DMA status block. The status block contents can change between the cmpb and the movzwl instruction. The driver would crash if the value was not 0xff during the cmpb instruction, but changed to 0xff during the movzwl instruction. 6828: 80 38 ff cmpb $0xff,(%eax) 682b: 0f b7 10 movzwl (%eax),%edx With the added barrier(), the compiled code now looks correct: 683d: 0f b7 10 movzwl (%eax),%edx 6840: 0f b6 c2 movzbl %dl,%eax 6843: 3d ff 00 00 00 cmp $0xff,%eax Thanks to Pascal de Bruijn for reporting the problem and Holger Noefer for patiently testing test patches for us. Also updated version to 2.0.1. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/bnx2.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index d47839184a06..b0cb29d4cc01 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -54,8 +54,8 @@ #define DRV_MODULE_NAME "bnx2" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "2.0.0" -#define DRV_MODULE_RELDATE "April 2, 2009" +#define DRV_MODULE_VERSION "2.0.1" +#define DRV_MODULE_RELDATE "May 6, 2009" #define FW_MIPS_FILE_06 "bnx2/bnx2-mips-06-4.6.16.fw" #define FW_RV2P_FILE_06 "bnx2/bnx2-rv2p-06-4.6.16.fw" #define FW_MIPS_FILE_09 "bnx2/bnx2-mips-09-4.6.17.fw" @@ -2600,6 +2600,7 @@ bnx2_get_hw_tx_cons(struct bnx2_napi *bnapi) /* Tell compiler that status block fields can change. */ barrier(); cons = *bnapi->hw_tx_cons_ptr; + barrier(); if (unlikely((cons & MAX_TX_DESC_CNT) == MAX_TX_DESC_CNT)) cons++; return cons; @@ -2879,6 +2880,7 @@ bnx2_get_hw_rx_cons(struct bnx2_napi *bnapi) /* Tell compiler that status block fields can change. */ barrier(); cons = *bnapi->hw_rx_cons_ptr; + barrier(); if (unlikely((cons & MAX_RX_DESC_CNT) == MAX_RX_DESC_CNT)) cons++; return cons; -- cgit v1.2.3 From 54f2c841fa0007e5fee3b7d01a911c774f0a6cda Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Thu, 7 May 2009 17:28:59 +0200 Subject: oprofile: fix cpu buffer size The unit of oprofile_cpu_buffer_size is in samples, but was allocated in bytes. This led to the allocation of too small cpu buffers. This patch recalculates the buffer size in bytes taking also the ring_buffer_event header size into account. Reported-by: Suravee Suthikulpanit Signed-off-by: Robert Richter --- drivers/oprofile/cpu_buffer.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/oprofile/cpu_buffer.c b/drivers/oprofile/cpu_buffer.c index f0e99d4c066b..242257b19441 100644 --- a/drivers/oprofile/cpu_buffer.c +++ b/drivers/oprofile/cpu_buffer.c @@ -78,16 +78,20 @@ void free_cpu_buffers(void) op_ring_buffer_write = NULL; } +#define RB_EVENT_HDR_SIZE 4 + int alloc_cpu_buffers(void) { int i; unsigned long buffer_size = oprofile_cpu_buffer_size; + unsigned long byte_size = buffer_size * (sizeof(struct op_sample) + + RB_EVENT_HDR_SIZE); - op_ring_buffer_read = ring_buffer_alloc(buffer_size, OP_BUFFER_FLAGS); + op_ring_buffer_read = ring_buffer_alloc(byte_size, OP_BUFFER_FLAGS); if (!op_ring_buffer_read) goto fail; - op_ring_buffer_write = ring_buffer_alloc(buffer_size, OP_BUFFER_FLAGS); + op_ring_buffer_write = ring_buffer_alloc(byte_size, OP_BUFFER_FLAGS); if (!op_ring_buffer_write) goto fail; -- cgit v1.2.3 From 51991763416251f259efbfe459c16f331f31d01f Mon Sep 17 00:00:00 2001 From: Len Brown Date: Thu, 7 May 2009 15:24:31 -0400 Subject: ACPICA: use acpi.* modparam namespace Add acpi/acpica/*.c to the acpi.* modparam namespace so that any modparams we stick into ACPICA do not expose ACPICA filenames to users. There are currently only two modparams in ACPICA, just recently added for http://bugzilla.kernel.org/show_bug.cgi?id=13041 With this change, they become acpi.gts=1 acpi.bfs=1 rather than hwsleep.gts=1 hwsleep.bfs=1 Signed-off-by: Len Brown --- drivers/acpi/acpica/Makefile | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile index 17e50824a6f1..72ac28da14e3 100644 --- a/drivers/acpi/acpica/Makefile +++ b/drivers/acpi/acpica/Makefile @@ -5,40 +5,43 @@ ccflags-y := -Os ccflags-$(CONFIG_ACPI_DEBUG) += -DACPI_DEBUG_OUTPUT -obj-y := dsfield.o dsmthdat.o dsopcode.o dswexec.o dswscope.o \ +# use acpi.o to put all files here into acpi.o modparam namespace +obj-y += acpi.o + +acpi-y := dsfield.o dsmthdat.o dsopcode.o dswexec.o dswscope.o \ dsmethod.o dsobject.o dsutils.o dswload.o dswstate.o \ dsinit.o -obj-y += evevent.o evregion.o evsci.o evxfevnt.o \ +acpi-y += evevent.o evregion.o evsci.o evxfevnt.o \ evmisc.o evrgnini.o evxface.o evxfregn.o \ evgpe.o evgpeblk.o -obj-y += exconfig.o exfield.o exnames.o exoparg6.o exresolv.o exstorob.o\ +acpi-y += exconfig.o exfield.o exnames.o exoparg6.o exresolv.o exstorob.o\ exconvrt.o exfldio.o exoparg1.o exprep.o exresop.o exsystem.o\ excreate.o exmisc.o exoparg2.o exregion.o exstore.o exutils.o \ exdump.o exmutex.o exoparg3.o exresnte.o exstoren.o -obj-y += hwacpi.o hwgpe.o hwregs.o hwsleep.o hwxface.o hwvalid.o +acpi-y += hwacpi.o hwgpe.o hwregs.o hwsleep.o hwxface.o hwvalid.o -obj-$(ACPI_FUTURE_USAGE) += hwtimer.o +acpi-$(ACPI_FUTURE_USAGE) += hwtimer.o -obj-y += nsaccess.o nsload.o nssearch.o nsxfeval.o \ +acpi-y += nsaccess.o nsload.o nssearch.o nsxfeval.o \ nsalloc.o nseval.o nsnames.o nsutils.o nsxfname.o \ nsdump.o nsinit.o nsobject.o nswalk.o nsxfobj.o \ nsparse.o nspredef.o -obj-$(ACPI_FUTURE_USAGE) += nsdumpdv.o +acpi-$(ACPI_FUTURE_USAGE) += nsdumpdv.o -obj-y += psargs.o psparse.o psloop.o pstree.o pswalk.o \ +acpi-y += psargs.o psparse.o psloop.o pstree.o pswalk.o \ psopcode.o psscope.o psutils.o psxface.o -obj-y += rsaddr.o rscreate.o rsinfo.o rsio.o rslist.o rsmisc.o rsxface.o \ +acpi-y += rsaddr.o rscreate.o rsinfo.o rsio.o rslist.o rsmisc.o rsxface.o \ rscalc.o rsirq.o rsmemory.o rsutils.o -obj-$(ACPI_FUTURE_USAGE) += rsdump.o +acpi-$(ACPI_FUTURE_USAGE) += rsdump.o -obj-y += tbxface.o tbinstal.o tbutils.o tbfind.o tbfadt.o tbxfroot.o +acpi-y += tbxface.o tbinstal.o tbutils.o tbfind.o tbfadt.o tbxfroot.o -obj-y += utalloc.o utdebug.o uteval.o utinit.o utmisc.o utxface.o \ +acpi-y += utalloc.o utdebug.o uteval.o utinit.o utmisc.o utxface.o \ utcopy.o utdelete.o utglobal.o utmath.o utobject.o \ utstate.o utmutex.o utobject.o utresrc.o utlock.o -- cgit v1.2.3 From 5afc4abe7902b8453c248321daa9b13b12d9c838 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Thu, 7 May 2009 21:11:56 -0400 Subject: ACPI: video: DMI workaround another broken Acer BIOS enabling display brightness http://bugzilla.kernel.org/show_bug.cgi?id=13121 Signed-off-by: Len Brown --- drivers/acpi/video.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 7e8ee49ebd40..3a3d1565a7dd 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -562,6 +562,14 @@ static struct dmi_system_id video_dmi_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5720"), }, }, + { + .callback = video_set_bqc_offset, + .ident = "Acer Aspire 5710Z", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5710Z"), + }, + }, {} }; -- cgit v1.2.3 From d07a9cba6be5c0e947afc1014b5a62182a86f1f1 Mon Sep 17 00:00:00 2001 From: Tim Cole Date: Thu, 7 May 2009 17:08:42 -0700 Subject: Input: joydev - blacklist digitizers BTN_TOUCH is not set by the wacom driver which causes it to be handled by the joydev driver while the resulting device is broken. This causes problems with applications that try to use a joystick device. Ubuntu BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/300143 Signed-off-by: Tim Cole Signed-off-by: Stefan Bader Acked-by: Tim Gardner Acked-by: Amit Kucheria Signed-off-by: Dmitry Torokhov --- drivers/input/joydev.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index 4224f0112849..012a5e753991 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -843,7 +843,13 @@ static const struct input_device_id joydev_blacklist[] = { INPUT_DEVICE_ID_MATCH_KEYBIT, .evbit = { BIT_MASK(EV_KEY) }, .keybit = { [BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH) }, - }, /* Avoid itouchpads, touchscreens and tablets */ + }, /* Avoid itouchpads and touchscreens */ + { + .flags = INPUT_DEVICE_ID_MATCH_EVBIT | + INPUT_DEVICE_ID_MATCH_KEYBIT, + .evbit = { BIT_MASK(EV_KEY) }, + .keybit = { [BIT_WORD(BTN_DIGI)] = BIT_MASK(BTN_DIGI) }, + }, /* Avoid tablets, digitisers and similar devices */ { } /* Terminating entry */ }; -- cgit v1.2.3 From 9e68177ef93b2f34eee5a1e1707bceef4b9ba69c Mon Sep 17 00:00:00 2001 From: Jussi Kivilinna Date: Thu, 7 May 2009 17:14:21 -0700 Subject: Input: ff-memless - fix signed to unsigned bit overflow When userspace sets effect->u.rumble.strong_magnitude to 0x8001 or larger, ml_combine_effects() would always return strong_magnitude 0xffff. Problem is that 'gain' is passed in as signed integer. Multiplying magnitude (__u16) with gain (int) causes magnitude read as signed and results negative value (with magnitude > 0x8000). This signed integer is then divided and value, still negative, converted to 32bit unsigned integer. Finally checking combine overflow min(new+old, 0xffff) gives out 0xffff. Fix is to simply change 'gain' to unsigned int. Signed-off-by: Jussi Kivilinna Acked-by: Anssi Hannula Signed-off-by: Dmitry Torokhov --- drivers/input/ff-memless.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/ff-memless.c b/drivers/input/ff-memless.c index bc4e40f3ede7..2d1415e16834 100644 --- a/drivers/input/ff-memless.c +++ b/drivers/input/ff-memless.c @@ -226,7 +226,7 @@ static int get_compatible_type(struct ff_device *ff, int effect_type) */ static void ml_combine_effects(struct ff_effect *effect, struct ml_effect_state *state, - int gain) + unsigned int gain) { struct ff_effect *new = state->effect; unsigned int strong, weak, i; -- cgit v1.2.3 From ddc50b6ad634d9ce2526a777d4b7da80effdfb60 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 8 May 2009 00:07:30 -0400 Subject: ACPI: power: update error message "Transitioning device [%s] to D%d" is not correct. We print this line when we attempted to transition the device, and it failed. So instead, print "Device [%s] failed to transition to D%d\n" This can happen under two conditions: 1. acpi_power_transition() fails when trying to handle the _ON/_OFF for associated power resource. 2. acpi_evaluate_object() on the explicit _PS0/_PS3 for that actual device could fail. this change clarifies, but doesn't fix http://bugzilla.kernel.org/show_bug.cgi?id=13243 Signed-off-by: Len Brown --- drivers/acpi/bus.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index e8f7b64e92da..ae862f1798dc 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -312,7 +312,7 @@ int acpi_bus_set_power(acpi_handle handle, int state) end: if (result) printk(KERN_WARNING PREFIX - "Transitioning device [%s] to D%d\n", + "Device [%s] failed to transition to D%d\n", device->pnp.bus_id, state); else { device->power.state = state; -- cgit v1.2.3 From 19bde778c1fd2574cc020a618d7d576f260271ca Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 8 May 2009 00:22:29 -0400 Subject: ACPI: suspend: don't let device _PS3 failure prevent suspend 6328a57401dc5f5cf9931738eb7268fcd8058c49 "Enable PNPACPI _PSx Support, v3" added a call to acpi_bus_set_power(handle, ACPI_STATE_D3) to pnpacpi_disable_resource() before the existing call to evaluate _DIS on the device. This caused suspend to fail on the system in http://bugzilla.kernel.org/show_bug.cgi?id=13243 because the sanity check to verify we entered _PS3 failed on the serial port. As a work-around, that sanity check can be disabled system-wide with "acpi.power_nocheck=1" Or perhaps we should just shrug off the _PS3 failure and carry on with _DIS like we used to -- which is what this patch does. Signed-off-by: Len Brown --- drivers/pnp/pnpacpi/core.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/pnp/pnpacpi/core.c b/drivers/pnp/pnpacpi/core.c index 9a3a682c6981..9496494f340e 100644 --- a/drivers/pnp/pnpacpi/core.c +++ b/drivers/pnp/pnpacpi/core.c @@ -110,11 +110,9 @@ static int pnpacpi_disable_resources(struct pnp_dev *dev) /* acpi_unregister_gsi(pnp_irq(dev, 0)); */ ret = 0; - if (acpi_bus_power_manageable(handle)) { - ret = acpi_bus_set_power(handle, ACPI_STATE_D3); - if (ret) - return ret; - } + if (acpi_bus_power_manageable(handle)) + acpi_bus_set_power(handle, ACPI_STATE_D3); + /* continue even if acpi_bus_set_power() fails */ if (ACPI_FAILURE(acpi_evaluate_object(handle, "_DIS", NULL, NULL))) ret = -ENODEV; return ret; -- cgit v1.2.3 From 2b6b7d4be487bada8c727df829c25068c7b5e5a3 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Thu, 7 May 2009 21:35:13 -0700 Subject: IB/mlx4: Don't overwrite fast registration page list when posting work request The low-level mlx4 driver modified the page-list addresses for fast register work requests post send to big-endian, and set a "present" bit. This caused problems later when the consumer attempted to unmap the pages using the page-list (using the list addresses which were assumed to be still in CPU-endian order). Fix the mlx4 driver to allocate two buffers and use a private buffer for the hardware-format bus addresses. This patch fixes , an NFS/RDMA server crash. The cause of the crash was found by Vu Pham of Mellanox. The fix is along the lines suggested by Steve Wise in comment #21 in bug 1571. Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx4/mlx4_ib.h | 1 + drivers/infiniband/hw/mlx4/mr.c | 10 ++++++++-- drivers/infiniband/hw/mlx4/qp.c | 2 +- 3 files changed, 10 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx4/mlx4_ib.h b/drivers/infiniband/hw/mlx4/mlx4_ib.h index 9974e886b8de..8a7dd6795fa0 100644 --- a/drivers/infiniband/hw/mlx4/mlx4_ib.h +++ b/drivers/infiniband/hw/mlx4/mlx4_ib.h @@ -86,6 +86,7 @@ struct mlx4_ib_mr { struct mlx4_ib_fast_reg_page_list { struct ib_fast_reg_page_list ibfrpl; + __be64 *mapped_page_list; dma_addr_t map; }; diff --git a/drivers/infiniband/hw/mlx4/mr.c b/drivers/infiniband/hw/mlx4/mr.c index 8e4d26d56a95..8f3666b20ea4 100644 --- a/drivers/infiniband/hw/mlx4/mr.c +++ b/drivers/infiniband/hw/mlx4/mr.c @@ -231,7 +231,11 @@ struct ib_fast_reg_page_list *mlx4_ib_alloc_fast_reg_page_list(struct ib_device if (!mfrpl) return ERR_PTR(-ENOMEM); - mfrpl->ibfrpl.page_list = dma_alloc_coherent(&dev->dev->pdev->dev, + mfrpl->ibfrpl.page_list = kmalloc(size, GFP_KERNEL); + if (!mfrpl->ibfrpl.page_list) + goto err_free; + + mfrpl->mapped_page_list = dma_alloc_coherent(&dev->dev->pdev->dev, size, &mfrpl->map, GFP_KERNEL); if (!mfrpl->ibfrpl.page_list) @@ -242,6 +246,7 @@ struct ib_fast_reg_page_list *mlx4_ib_alloc_fast_reg_page_list(struct ib_device return &mfrpl->ibfrpl; err_free: + kfree(mfrpl->ibfrpl.page_list); kfree(mfrpl); return ERR_PTR(-ENOMEM); } @@ -252,8 +257,9 @@ void mlx4_ib_free_fast_reg_page_list(struct ib_fast_reg_page_list *page_list) struct mlx4_ib_fast_reg_page_list *mfrpl = to_mfrpl(page_list); int size = page_list->max_page_list_len * sizeof (u64); - dma_free_coherent(&dev->dev->pdev->dev, size, page_list->page_list, + dma_free_coherent(&dev->dev->pdev->dev, size, mfrpl->mapped_page_list, mfrpl->map); + kfree(mfrpl->ibfrpl.page_list); kfree(mfrpl); } diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c index f385a24d31d2..20724aee76f4 100644 --- a/drivers/infiniband/hw/mlx4/qp.c +++ b/drivers/infiniband/hw/mlx4/qp.c @@ -1365,7 +1365,7 @@ static void set_fmr_seg(struct mlx4_wqe_fmr_seg *fseg, struct ib_send_wr *wr) int i; for (i = 0; i < wr->wr.fast_reg.page_list_len; ++i) - wr->wr.fast_reg.page_list->page_list[i] = + mfrpl->mapped_page_list[i] = cpu_to_be64(wr->wr.fast_reg.page_list->page_list[i] | MLX4_MTT_FLAG_PRESENT); -- cgit v1.2.3 From d86c1302c58e4d4ebd99d459c2daff13613ac7f4 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 21 Apr 2009 07:22:53 -0700 Subject: Driver core: platform: fix kernel-doc warnings Fix function parameter notation in platform.c; fixes kernel-doc warnings. Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- drivers/base/platform.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/base/platform.c b/drivers/base/platform.c index b5b6c973a2e0..ec5400c32021 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -1028,7 +1028,7 @@ static __initdata LIST_HEAD(early_platform_device_list); /** * early_platform_driver_register - * @edrv: early_platform driver structure + * @epdrv: early_platform driver structure * @buf: string passed from early_param() */ int __init early_platform_driver_register(struct early_platform_driver *epdrv, @@ -1112,7 +1112,7 @@ void __init early_platform_driver_register_all(char *class_str) /** * early_platform_match - * @edrv: early platform driver structure + * @epdrv: early platform driver structure * @id: id to match against */ static __init struct platform_device * @@ -1130,7 +1130,7 @@ early_platform_match(struct early_platform_driver *epdrv, int id) /** * early_platform_left - * @edrv: early platform driver structure + * @epdrv: early platform driver structure * @id: return true if id or above exists */ static __init int early_platform_left(struct early_platform_driver *epdrv, -- cgit v1.2.3 From bee86321b7b2312fbb62f4cb903eba1cca45e8ad Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Fri, 13 Mar 2009 23:06:59 +0800 Subject: Revert driver core: fix passing platform_data This reverts commit ce21c7bcd796fc4f45d48781b7e85f493cc55ee5: We will remove platform_data field from struct device until all platform devices pass its specific data from platfom_device and all platform drivers use platform specific data passed by platform_device->platform_data. This kind of conversion will need a long time, for thousands of files is affected. To make the conversion easily, we allow platform specific data passed by struct device or struct platform_device and platform driver may use it from struct device or struct platform_device. As we really don't want to do this at all. Cc: David Brownell Cc: Ming Lei Signed-off-by: Greg Kroah-Hartman --- drivers/base/platform.c | 15 +-------------- 1 file changed, 1 insertion(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/base/platform.c b/drivers/base/platform.c index ec5400c32021..d1d0ee431926 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -247,20 +247,7 @@ int platform_device_add(struct platform_device *pdev) else dev_set_name(&pdev->dev, pdev->name); - /* We will remove platform_data field from struct device - * if all platform devices pass its platform specific data - * from platform_device. The conversion is going to be a - * long time, so we allow the two cases coexist to make - * this kind of fix more easily*/ - if (pdev->platform_data && pdev->dev.platform_data) { - printk(KERN_ERR - "%s: use which platform_data?\n", - dev_name(&pdev->dev)); - } else if (pdev->platform_data) { - pdev->dev.platform_data = pdev->platform_data; - } else if (pdev->dev.platform_data) { - pdev->platform_data = pdev->dev.platform_data; - } + pdev->platform_data = pdev->dev.platform_data; for (i = 0; i < pdev->num_resources; i++) { struct resource *p, *r = &pdev->resource[i]; -- cgit v1.2.3 From e67c85626cd02e306da1b4195bfaf68d61050796 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Sun, 8 Mar 2009 23:13:32 +0800 Subject: Revert driver core: move platform_data into platform_device This reverts commit 006f4571a15fae3a0575f2a0f9e9b63b3d1012f8: This patch moves platform_data from struct device into struct platform_device, based on the two ideas: 1. Now all platform_driver is registered by platform_driver_register, which makes probe()/release()/... of platform_driver passed parameter of platform_device *, so platform driver can get platform_data from platform_device; 2. Other kind of devices do not need to use platform_data, we can decrease size of device if moving it to platform_device. Taking into consideration of thousands of files to be fixed and they can't be finished in one night(maybe it will take a long time), so we keep platform_data in device to allow two kind of cases coexist until all platform devices pass its platfrom data from platform_device->platform_data. All patches to do this kind of conversion are welcome. As we don't really want to do it, it was a bad idea. Cc: David Brownell Cc: Ming Lei Signed-off-by: Greg Kroah-Hartman --- drivers/base/platform.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/base/platform.c b/drivers/base/platform.c index d1d0ee431926..8b4708e06244 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -217,7 +217,6 @@ int platform_device_add_data(struct platform_device *pdev, const void *data, if (d) { memcpy(d, data, size); pdev->dev.platform_data = d; - pdev->platform_data = d; } return d ? 0 : -ENOMEM; } @@ -247,8 +246,6 @@ int platform_device_add(struct platform_device *pdev) else dev_set_name(&pdev->dev, pdev->name); - pdev->platform_data = pdev->dev.platform_data; - for (i = 0; i < pdev->num_resources; i++) { struct resource *p, *r = &pdev->resource[i]; -- cgit v1.2.3 From 10107bd04fc88657204ca40af2ace33626496fd3 Mon Sep 17 00:00:00 2001 From: Simon Arlott Date: Thu, 23 Apr 2009 18:19:02 +0100 Subject: USB: cxacru: Fix negative dB output Values of dB between -0.99 and -0.01 will be output with the wrong sign. This converts the negative value to positive and outputs it with a "-" prefix. Signed-off-by: Simon Arlott Signed-off-by: Greg Kroah-Hartman --- drivers/usb/atm/cxacru.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c index 6789089e2461..56802d2e994b 100644 --- a/drivers/usb/atm/cxacru.c +++ b/drivers/usb/atm/cxacru.c @@ -227,8 +227,14 @@ static ssize_t cxacru_sysfs_showattr_s8(s8 value, char *buf) static ssize_t cxacru_sysfs_showattr_dB(s16 value, char *buf) { - return snprintf(buf, PAGE_SIZE, "%d.%02u\n", - value / 100, abs(value) % 100); + if (likely(value >= 0)) { + return snprintf(buf, PAGE_SIZE, "%u.%02u\n", + value / 100, value % 100); + } else { + value = -value; + return snprintf(buf, PAGE_SIZE, "-%u.%02u\n", + value / 100, value % 100); + } } static ssize_t cxacru_sysfs_showattr_bool(u32 value, char *buf) -- cgit v1.2.3 From 1002bb77c0b7f1241a5108ffa04d836ddc5060c0 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Thu, 23 Apr 2009 22:38:12 -0400 Subject: USB: ftdi_sio: add vendor/product id for the Marvell SheevaPlug For reference: http://www.marvell.com/products/embedded_processors/developer/kirkwood/sheevaplug.jsp Signed-off-by: Nicolas Pitre Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 2 ++ drivers/usb/serial/ftdi_sio.h | 6 ++++++ 2 files changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 8100f1d25904..aab567644b99 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -669,6 +669,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(ADI_VID, ADI_GNICE_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(JETI_VID, JETI_SPC1201_PID) }, + { USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index c09f658a448b..12330fa1c095 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -919,6 +919,12 @@ #define JETI_VID 0x0c6c #define JETI_SPC1201_PID 0x04b2 +/* + * Marvell SheevaPlug + */ +#define MARVELL_VID 0x9e88 +#define MARVELL_SHEEVAPLUG_PID 0x9e8f + /* * BmRequestType: 1100 0000b * bRequest: FTDI_E2_READ -- cgit v1.2.3 From 72a772a9a3da47e1cdbe01c4aa1105aa8badfff2 Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Tue, 28 Apr 2009 15:53:02 -0400 Subject: USB: Fix makefile so that CONFIG_WDM and CONFIG_TMC work. If CONFIG_USB_ACM and CONFIG_USB_PRINTER are not set, then cdc-wdm and usbtmc won't get built. Signed-off-by: Andy Lutomirski Signed-off-by: Greg Kroah-Hartman --- drivers/usb/Makefile | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 89299a5ce168..0716cdb44cd8 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -27,6 +27,8 @@ obj-$(CONFIG_USB_WUSB) += wusbcore/ obj-$(CONFIG_USB_ACM) += class/ obj-$(CONFIG_USB_PRINTER) += class/ +obj-$(CONFIG_USB_WDM) += class/ +obj-$(CONFIG_USB_TMC) += class/ obj-$(CONFIG_USB_STORAGE) += storage/ obj-$(CONFIG_USB) += storage/ -- cgit v1.2.3 From 0f43158caddcbb110916212ebe4e39993ae70864 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 27 Apr 2009 13:22:40 -0400 Subject: USB: Gadget: fix UTF conversion in the usbstring library This patch (as1234) fixes a bug in the UTF8 -> UTF-16 conversion routine in the gadget/usbstring library. In a UTF-8 multi-byte sequence, all bytes after the first should have their high-order two bits set to 10, not 11. Signed-off-by: Alan Stern Acked-by: David Brownell Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/usbstring.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/usbstring.c b/drivers/usb/gadget/usbstring.c index 4154be375c7a..58c4d37d312a 100644 --- a/drivers/usb/gadget/usbstring.c +++ b/drivers/usb/gadget/usbstring.c @@ -38,7 +38,7 @@ static int utf8_to_utf16le(const char *s, __le16 *cp, unsigned len) uchar = (c & 0x1f) << 6; c = (u8) *s++; - if ((c & 0xc0) != 0xc0) + if ((c & 0xc0) != 0x80) goto fail; c &= 0x3f; uchar |= c; @@ -49,13 +49,13 @@ static int utf8_to_utf16le(const char *s, __le16 *cp, unsigned len) uchar = (c & 0x0f) << 12; c = (u8) *s++; - if ((c & 0xc0) != 0xc0) + if ((c & 0xc0) != 0x80) goto fail; c &= 0x3f; uchar |= c << 6; c = (u8) *s++; - if ((c & 0xc0) != 0xc0) + if ((c & 0xc0) != 0x80) goto fail; c &= 0x3f; uchar |= c; -- cgit v1.2.3 From 031defd11ee11753110098603236a4257b2cc03d Mon Sep 17 00:00:00 2001 From: Phil Dibowitz Date: Sun, 26 Apr 2009 12:47:51 +0200 Subject: USB: unusual_devs: extend nokia 6288 bcd range This patch was originaly submitted by Phillip Potter but was re-diffed to conform with SubmittingPatches and to rebase on a newer tree by me. Signed-off-by: Phil Dibowitz Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index fa65a3b08601..4b8b69045fe6 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -160,8 +160,9 @@ UNUSUAL_DEV( 0x0420, 0x0001, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), -/* Reported by Andrew Nayenko */ -UNUSUAL_DEV( 0x0421, 0x0019, 0x0592, 0x0592, +/* Reported by Andrew Nayenko + * Updated for new firmware by Phillip Potter */ +UNUSUAL_DEV( 0x0421, 0x0019, 0x0592, 0x0610, "Nokia", "Nokia 6288", US_SC_DEVICE, US_PR_DEVICE, NULL, -- cgit v1.2.3 From c45d63202fbaccef7ef7946c03f27f72c809b1cc Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 30 Apr 2009 10:06:19 -0400 Subject: usb-serial: ftdi_sio: fix reference counting of ftdi_private This patch (as1238) adds proper reference counting for ftdi_sio's private data structure. Without it, the driver will free the structure while it is still in use if the user unplugs the serial device before closing the device file. The patch also replaces a slightly dangerous cancel_delayed_work/flush_scheduled_work pair with cancel_delayed_work_sync, which is always safer. Signed-off-by: Alan Stern Reported-by: Daniel Mack Tested-by: Daniel Mack Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index aab567644b99..0ab8474b00cb 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -56,6 +56,7 @@ static __u16 vendor = FTDI_VID; static __u16 product; struct ftdi_private { + struct kref kref; ftdi_chip_type_t chip_type; /* type of device, either SIO or FT8U232AM */ int baud_base; /* baud base clock for divisor setting */ @@ -1354,6 +1355,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) return -ENOMEM; } + kref_init(&priv->kref); spin_lock_init(&priv->rx_lock); spin_lock_init(&priv->tx_lock); init_waitqueue_head(&priv->delta_msr_wait); @@ -1470,6 +1472,13 @@ static void ftdi_shutdown(struct usb_serial *serial) dbg("%s", __func__); } +static void ftdi_sio_priv_release(struct kref *k) +{ + struct ftdi_private *priv = container_of(k, struct ftdi_private, kref); + + kfree(priv); +} + static int ftdi_sio_port_remove(struct usb_serial_port *port) { struct ftdi_private *priv = usb_get_serial_port_data(port); @@ -1484,7 +1493,7 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port) if (priv) { usb_set_serial_port_data(port, NULL); - kfree(priv); + kref_put(&priv->kref, ftdi_sio_priv_release); } return 0; @@ -1549,7 +1558,8 @@ static int ftdi_open(struct tty_struct *tty, dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __func__, result); - + else + kref_get(&priv->kref); return result; } /* ftdi_open */ @@ -1591,11 +1601,11 @@ static void ftdi_close(struct tty_struct *tty, mutex_unlock(&port->serial->disc_mutex); /* cancel any scheduled reading */ - cancel_delayed_work(&priv->rx_work); - flush_scheduled_work(); + cancel_delayed_work_sync(&priv->rx_work); /* shutdown our bulk read */ usb_kill_urb(port->read_urb); + kref_put(&priv->kref, ftdi_sio_priv_release); } /* ftdi_close */ -- cgit v1.2.3 From 82fbb01cf3c2bd150262269bd017431d7dd74063 Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Thu, 16 Apr 2009 14:43:14 +0300 Subject: Staging: w35und: unregister device from the ieee80211 stack upon ->disconnect() Impact: fix module removal This patch fixes an oops when the w35und module is removed from the kernel and added back. Reported-by: luoyi Tested-by: Sandro Bonazzola Cc: Pavel Machek Signed-off-by: Pekka Enberg Signed-off-by: Greg Kroah-Hartman --- drivers/staging/winbond/wbusb.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c index 9c3f9439f35e..3b2d52819b4c 100644 --- a/drivers/staging/winbond/wbusb.c +++ b/drivers/staging/winbond/wbusb.c @@ -386,7 +386,7 @@ static int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id if (err) goto error_free_hw; - usb_set_intfdata(intf, priv); + usb_set_intfdata(intf, dev); return 0; @@ -415,10 +415,15 @@ static void wb35_hw_halt(struct wbsoft_priv *adapter) static void wb35_disconnect(struct usb_interface *intf) { - struct wbsoft_priv *priv = usb_get_intfdata(intf); + struct ieee80211_hw *hw = usb_get_intfdata(intf); + struct wbsoft_priv *priv = hw->priv; wb35_hw_halt(priv); + ieee80211_stop_queues(hw); + ieee80211_unregister_hw(hw); + ieee80211_free_hw(hw); + usb_set_intfdata(intf, NULL); usb_put_dev(interface_to_usbdev(intf)); } -- cgit v1.2.3 From a9ed12e5c149b05adf13bea5f1e96d68c2127faf Mon Sep 17 00:00:00 2001 From: Dave Hayes Date: Sat, 18 Apr 2009 02:18:37 -0500 Subject: Staging: rt2870: new device id Hey, I have an Edimax wireless USB adapter that uses the rt2870 chipset. lsusb shows it as follows: Bus 001 Device 002: ID 7392:7717 When I added that ID to rt2870.h, the device came up and worked as expected. From: Dave Hayes Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rt2870/rt2870.h | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/staging/rt2870/rt2870.h b/drivers/staging/rt2870/rt2870.h index a42caa370808..a69cf338e498 100644 --- a/drivers/staging/rt2870/rt2870.h +++ b/drivers/staging/rt2870/rt2870.h @@ -145,6 +145,7 @@ {USB_DEVICE(0x0789,0x0162)}, /* Logitec */ \ {USB_DEVICE(0x0789,0x0163)}, /* Logitec */ \ {USB_DEVICE(0x0789,0x0164)}, /* Logitec */ \ + {USB_DEVICE(0x7392,0x7717)}, /* Edimax */ \ { }/* Terminating entry */ \ } -- cgit v1.2.3 From be286fd229e95658516ddf880054ea3c9ad9bb34 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Sat, 18 Apr 2009 21:09:08 -0500 Subject: Staging: rtl8187se: Fix compilation warnings and procfs directory leak Fix some warnings during compilation and correct a programming error that was leaking a directory in /proc. Signed-off-by: Larry Finger Tested-by: Bernhard Schiffner Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8187se/r8180.h | 2 +- drivers/staging/rtl8187se/r8180_core.c | 46 ++++++---------------------------- 2 files changed, 9 insertions(+), 39 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/rtl8187se/r8180.h b/drivers/staging/rtl8187se/r8180.h index 12215fc61ddc..db446b7e2e08 100644 --- a/drivers/staging/rtl8187se/r8180.h +++ b/drivers/staging/rtl8187se/r8180.h @@ -19,7 +19,7 @@ #define R8180H -#define RTL8180_MODULE_NAME "rtl8180" +#define RTL8180_MODULE_NAME "r8180" #define DMESG(x,a...) printk(KERN_INFO RTL8180_MODULE_NAME ": " x "\n", ## a) #define DMESGW(x,a...) printk(KERN_WARNING RTL8180_MODULE_NAME ": WW:" x "\n", ## a) #define DMESGE(x,a...) printk(KERN_WARNING RTL8180_MODULE_NAME ": EE:" x "\n", ## a) diff --git a/drivers/staging/rtl8187se/r8180_core.c b/drivers/staging/rtl8187se/r8180_core.c index 6ecd12de4296..e10413cee0df 100644 --- a/drivers/staging/rtl8187se/r8180_core.c +++ b/drivers/staging/rtl8187se/r8180_core.c @@ -640,11 +640,9 @@ void rtl8180_proc_init_one(struct net_device *dev) { struct proc_dir_entry *e; struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); - priv->dir_dev = create_proc_entry(dev->name, - S_IFDIR | S_IRUGO | S_IXUGO, - rtl8180_proc); + priv->dir_dev = rtl8180_proc; if (!priv->dir_dev) { - DMESGE("Unable to initialize /proc/net/rtl8180/%s\n", + DMESGE("Unable to initialize /proc/net/r8180/%s\n", dev->name); return; } @@ -654,7 +652,7 @@ void rtl8180_proc_init_one(struct net_device *dev) if (!e) { DMESGE("Unable to initialize " - "/proc/net/rtl8180/%s/stats-hw\n", + "/proc/net/r8180/%s/stats-hw\n", dev->name); } @@ -663,7 +661,7 @@ void rtl8180_proc_init_one(struct net_device *dev) if (!e) { DMESGE("Unable to initialize " - "/proc/net/rtl8180/%s/stats-rx\n", + "/proc/net/r8180/%s/stats-rx\n", dev->name); } @@ -673,7 +671,7 @@ void rtl8180_proc_init_one(struct net_device *dev) if (!e) { DMESGE("Unable to initialize " - "/proc/net/rtl8180/%s/stats-tx\n", + "/proc/net/r8180/%s/stats-tx\n", dev->name); } #if 0 @@ -702,7 +700,7 @@ void rtl8180_proc_init_one(struct net_device *dev) if (!e) { DMESGE("Unable to initialize " - "/proc/net/rtl8180/%s/registers\n", + "/proc/net/r8180/%s/registers\n", dev->name); } } @@ -977,13 +975,6 @@ void check_tx_ring(struct net_device *dev, int pri) *tmp & (1<<15)? "ok": "err", *(tmp+4)); } - DMESG("nic at %d", - (nic-nicbegin) / 8 /4); - DMESG("tail at %d", ((int)tail - (int)begin) /8 /4); - DMESG("head at %d", ((int)head - (int)begin) /8 /4); - DMESG("check free desc returns %d", check_nic_enought_desc(dev,pri)); - DMESG("free desc is %d\n", get_curr_tx_free_desc(dev,pri)); - //rtl8180_reset(dev); return; } @@ -1736,17 +1727,7 @@ short alloc_tx_desc_ring(struct net_device *dev, int bufsize, int count, * descriptor's buffer must be 256 byte aligned * we shouldn't be here, since we set DMA mask ! */ - DMESGW("Fixing TX alignment"); - desc = (u32*)((u8*)desc + 256); -#if (defined(CONFIG_HIGHMEM64G) || defined(CONFIG_64BIT_PHYS_ADDR)) - desc = (u32*)((u64)desc &~ 0xff); - dma_desc = (dma_addr_t)((u8*)dma_desc + 256); - dma_desc = (dma_addr_t)((u64)dma_desc &~ 0xff); -#else - desc = (u32*)((u32)desc &~ 0xff); - dma_desc = (dma_addr_t)((u8*)dma_desc + 256); - dma_desc = (dma_addr_t)((u32)dma_desc &~ 0xff); -#endif + WARN(1, "DMA buffer is not aligned\n"); } tmp=desc; for (i=0;irxring=desc; -- cgit v1.2.3 From ca9fc928788a02a0fe975dc3334e6d7ec521b6af Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 24 Apr 2009 17:04:44 -0700 Subject: Staging: comedi: David doesn't want to get comedi patches He's long moved on from the project. Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/TODO | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/comedi/TODO b/drivers/staging/comedi/TODO index 557812958464..15c9348fb938 100644 --- a/drivers/staging/comedi/TODO +++ b/drivers/staging/comedi/TODO @@ -11,4 +11,3 @@ Please send patches to Greg Kroah-Hartman and copy: Ian Abbott Frank Mori Hess - David Schleef -- cgit v1.2.3 From 3ba8c7920552865a338e00512715786b54db4da0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= Date: Tue, 28 Apr 2009 14:54:07 +0200 Subject: IXP4xx: use "ENODEV" instead of "ENOSYS" in module initialization. ENOSYS makes modutils complain about missing kernel module support. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa --- drivers/net/arm/ixp4xx_eth.c | 6 +++--- drivers/net/wan/ixp4xx_hss.c | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c index 448487e22fa3..721b5421bf1a 100644 --- a/drivers/net/arm/ixp4xx_eth.c +++ b/drivers/net/arm/ixp4xx_eth.c @@ -338,12 +338,12 @@ static int ixp4xx_mdio_register(void) if (cpu_is_ixp43x()) { /* IXP43x lacks NPE-B and uses NPE-C for MII PHY access */ if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEC_ETH)) - return -ENOSYS; + return -ENODEV; mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthC_BASE_VIRT; } else { /* All MII PHY accesses use NPE-B Ethernet registers */ if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEB_ETH0)) - return -ENOSYS; + return -ENODEV; mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT; } @@ -1174,7 +1174,7 @@ static int __devinit eth_init_one(struct platform_device *pdev) regs_phys = IXP4XX_EthC_BASE_PHYS; break; default: - err = -ENOSYS; + err = -ENODEV; goto err_free; } diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c index 3bf7d3f447db..765a7f5d6aa4 100644 --- a/drivers/net/wan/ixp4xx_hss.c +++ b/drivers/net/wan/ixp4xx_hss.c @@ -1249,7 +1249,7 @@ static int __devinit hss_init_one(struct platform_device *pdev) return -ENOMEM; if ((port->npe = npe_request(0)) == NULL) { - err = -ENOSYS; + err = -ENODEV; goto err_free; } @@ -1311,7 +1311,7 @@ static int __init hss_init_module(void) if ((ixp4xx_read_feature_bits() & (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS)) != (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS)) - return -ENOSYS; + return -ENODEV; spin_lock_init(&npe_lock); -- cgit v1.2.3 From 7aa6a4786e70fe826b998d1f95ba911a28546844 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= Date: Mon, 4 May 2009 21:31:52 +0200 Subject: IXP4xx: complete Ethernet netdev setup before calling register_netdev(). MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa --- drivers/net/arm/ixp4xx_eth.c | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c index 721b5421bf1a..a740053d3af3 100644 --- a/drivers/net/arm/ixp4xx_eth.c +++ b/drivers/net/arm/ixp4xx_eth.c @@ -1189,15 +1189,10 @@ static int __devinit eth_init_one(struct platform_device *pdev) goto err_free; } - if (register_netdev(dev)) { - err = -EIO; - goto err_npe_rel; - } - port->mem_res = request_mem_region(regs_phys, REGS_SIZE, dev->name); if (!port->mem_res) { err = -EBUSY; - goto err_unreg; + goto err_npe_rel; } port->plat = plat; @@ -1215,20 +1210,25 @@ static int __devinit eth_init_one(struct platform_device *pdev) snprintf(phy_id, BUS_ID_SIZE, PHY_ID_FMT, "0", plat->phy); port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link, 0, PHY_INTERFACE_MODE_MII); - if (IS_ERR(port->phydev)) { - printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name); - return PTR_ERR(port->phydev); - } + if ((err = IS_ERR(port->phydev))) + goto err_free_mem; port->phydev->irq = PHY_POLL; + if ((err = register_netdev(dev))) + goto err_phy_dis; + printk(KERN_INFO "%s: MII PHY %i on %s\n", dev->name, plat->phy, npe_name(port->npe)); return 0; -err_unreg: - unregister_netdev(dev); +err_phy_dis: + phy_disconnect(port->phydev); +err_free_mem: + npe_port_tab[NPE_ID(port->id)] = NULL; + platform_set_drvdata(pdev, NULL); + release_resource(port->mem_res); err_npe_rel: npe_release(port->npe); err_free: @@ -1242,6 +1242,7 @@ static int __devexit eth_remove_one(struct platform_device *pdev) struct port *port = netdev_priv(dev); unregister_netdev(dev); + phy_disconnect(port->phydev); npe_port_tab[NPE_ID(port->id)] = NULL; platform_set_drvdata(pdev, NULL); npe_release(port->npe); -- cgit v1.2.3 From 6f5bbff9a1b7d6864a495763448a363bbfa96324 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 6 May 2009 01:34:22 -0400 Subject: Convert obvious places to deactivate_locked_super() Signed-off-by: Al Viro --- drivers/mtd/mtdsuper.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/mtdsuper.c b/drivers/mtd/mtdsuper.c index 92285d0089c2..af8b42e0a55b 100644 --- a/drivers/mtd/mtdsuper.c +++ b/drivers/mtd/mtdsuper.c @@ -74,8 +74,7 @@ static int get_sb_mtd_aux(struct file_system_type *fs_type, int flags, ret = fill_super(sb, data, flags & MS_SILENT ? 1 : 0); if (ret < 0) { - up_write(&sb->s_umount); - deactivate_super(sb); + deactivate_locked_super(sb); return ret; } -- cgit v1.2.3 From 265e771e8197cdb22a1e2556663173fb62c9cd91 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 6 May 2009 01:36:04 -0400 Subject: Fix deadlock in ipathfs ->get_sb() forgot to unlock superblock before calling deactivate_super()... Signed-off-by: Al Viro --- drivers/infiniband/hw/ipath/ipath_fs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/ipath/ipath_fs.c b/drivers/infiniband/hw/ipath/ipath_fs.c index 8dc2bb781605..b3684060465e 100644 --- a/drivers/infiniband/hw/ipath/ipath_fs.c +++ b/drivers/infiniband/hw/ipath/ipath_fs.c @@ -347,7 +347,7 @@ static int ipathfs_fill_super(struct super_block *sb, void *data, spin_unlock_irqrestore(&ipath_devs_lock, flags); ret = create_device_files(sb, dd); if (ret) { - deactivate_super(sb); + deactivate_locked_super(sb); goto bail; } spin_lock_irqsave(&ipath_devs_lock, flags); -- cgit v1.2.3 From e24977d45f45d1675e050dc1a0aaf4bfc4ca9866 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 2 Apr 2009 21:17:03 -0400 Subject: Reduce path_lookup() abuses ... use kern_path() where possible [folded a fix from rdd] Signed-off-by: Al Viro --- drivers/scsi/osd/osd_uld.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/osd/osd_uld.c b/drivers/scsi/osd/osd_uld.c index f644c9571eab..22b59e13ba83 100644 --- a/drivers/scsi/osd/osd_uld.c +++ b/drivers/scsi/osd/osd_uld.c @@ -173,26 +173,26 @@ static const struct file_operations osd_fops = { .unlocked_ioctl = osd_uld_ioctl, }; -struct osd_dev *osduld_path_lookup(const char *path) +struct osd_dev *osduld_path_lookup(const char *name) { - struct nameidata nd; + struct path path; struct inode *inode; struct cdev *cdev; struct osd_uld_device *uninitialized_var(oud); int error; - if (!path || !*path) { + if (!name || !*name) { OSD_ERR("Mount with !path || !*path\n"); return ERR_PTR(-EINVAL); } - error = path_lookup(path, LOOKUP_FOLLOW, &nd); + error = kern_path(name, LOOKUP_FOLLOW, &path); if (error) { - OSD_ERR("path_lookup of %s faild=>%d\n", path, error); + OSD_ERR("path_lookup of %s failed=>%d\n", name, error); return ERR_PTR(error); } - inode = nd.path.dentry->d_inode; + inode = path.dentry->d_inode; error = -EINVAL; /* Not the right device e.g osd_uld_device */ if (!S_ISCHR(inode->i_mode)) { OSD_DEBUG("!S_ISCHR()\n"); @@ -202,15 +202,15 @@ struct osd_dev *osduld_path_lookup(const char *path) cdev = inode->i_cdev; if (!cdev) { OSD_ERR("Before mounting an OSD Based filesystem\n"); - OSD_ERR(" user-mode must open+close the %s device\n", path); - OSD_ERR(" Example: bash: echo < %s\n", path); + OSD_ERR(" user-mode must open+close the %s device\n", name); + OSD_ERR(" Example: bash: echo < %s\n", name); goto out; } /* The Magic wand. Is it our char-dev */ /* TODO: Support sg devices */ if (cdev->owner != THIS_MODULE) { - OSD_ERR("Error mounting %s - is not an OSD device\n", path); + OSD_ERR("Error mounting %s - is not an OSD device\n", name); goto out; } @@ -220,7 +220,7 @@ struct osd_dev *osduld_path_lookup(const char *path) error = 0; out: - path_put(&nd.path); + path_put(&path); return error ? ERR_PTR(error) : &oud->od; } EXPORT_SYMBOL(osduld_path_lookup); -- cgit v1.2.3 From 2a32cebd6cbcc43996c3e2d114fa32ba1e71192a Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 8 May 2009 16:05:57 -0400 Subject: Fix races around the access to ->s_options Put generic_show_options read access to s_options under rcu_read_lock, split save_mount_options() into "we are setting it the first time" (uses in foo_fill_super()) and "we are relacing and freeing the old one", synchronize_rcu() before kfree() in the latter. Signed-off-by: Al Viro --- drivers/isdn/capi/capifs.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/isdn/capi/capifs.c b/drivers/isdn/capi/capifs.c index b129409925af..8f9f3b5a3e8c 100644 --- a/drivers/isdn/capi/capifs.c +++ b/drivers/isdn/capi/capifs.c @@ -75,8 +75,7 @@ static int capifs_remount(struct super_block *s, int *flags, char *data) } } - kfree(s->s_options); - s->s_options = new_opt; + replace_mount_options(s, new_opt); config.setuid = setuid; config.setgid = setgid; -- cgit v1.2.3 From b0c4f3222c7406f0aee9d52b7d604a1d36108463 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 8 May 2009 16:23:30 -0400 Subject: Fix the race between capifs remount and node creation we don't want to deal with half-updated config Signed-off-by: Al Viro --- drivers/isdn/capi/capifs.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/isdn/capi/capifs.c b/drivers/isdn/capi/capifs.c index 8f9f3b5a3e8c..bff72d81f263 100644 --- a/drivers/isdn/capi/capifs.c +++ b/drivers/isdn/capi/capifs.c @@ -75,14 +75,17 @@ static int capifs_remount(struct super_block *s, int *flags, char *data) } } - replace_mount_options(s, new_opt); + mutex_lock(&s->s_root->d_inode->i_mutex); + replace_mount_options(s, new_opt); config.setuid = setuid; config.setgid = setgid; config.uid = uid; config.gid = gid; config.mode = mode; + mutex_unlock(&s->s_root->d_inode->i_mutex); + return 0; } @@ -153,13 +156,16 @@ void capifs_new_ncci(unsigned int number, dev_t device) if (!inode) return; inode->i_ino = number+2; + + dentry = get_node(number); + + /* config contents is protected by root's i_mutex */ inode->i_uid = config.setuid ? config.uid : current_fsuid(); inode->i_gid = config.setgid ? config.gid : current_fsgid(); inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME; init_special_inode(inode, S_IFCHR|config.mode, device); //inode->i_op = &capifs_file_inode_operations; - dentry = get_node(number); if (!IS_ERR(dentry) && !dentry->d_inode) d_instantiate(dentry, inode); mutex_unlock(&capifs_root->d_inode->i_mutex); -- cgit v1.2.3 From 9d34d1a20e8171be819a6c8c4de4eea6104d174e Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Fri, 8 May 2009 11:49:11 +0000 Subject: bonding: fix panic if initialization fails If module initialisation failed (e.g. because the bonding sysfs entry cannot be created), kernel panics: IP: [] destroy_workqueue+0x2d/0x146 Call Trace: [] bond_destructor+0x28/0x78 [] netdev_run_todo+0x231/0x25a [] rtnl_unlock+0x9/0xb [] bonding_init+0x83e/0x84a Remove the calls to bond_work_cancel_all() and destroy_workqueue(); both are also called/scheduled via bond_free_all(). bond_destroy_sysfs is unecessary because the sysfs entry has not been created in the error case. Signed-off-by: Florian Westphal Signed-off-by: Jay Vosburgh Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 8 -------- 1 file changed, 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 2188a96fc090..74824028f85c 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -5181,7 +5181,6 @@ static int __init bonding_init(void) { int i; int res; - struct bonding *bond; printk(KERN_INFO "%s", version); @@ -5212,13 +5211,6 @@ static int __init bonding_init(void) goto out; err: - list_for_each_entry(bond, &bond_dev_list, bond_list) { - bond_work_cancel_all(bond); - destroy_workqueue(bond->wq); - } - - bond_destroy_sysfs(); - rtnl_lock(); bond_free_all(); rtnl_unlock(); -- cgit v1.2.3 From cb1287a82281ab3ddb0768250a46603977075b91 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Fri, 17 Apr 2009 20:50:30 -0300 Subject: V4L/DVB (11575): uvcvideo: fix uvc resume failed Now urb buffers is not freed before suspend, so uvc_alloc_urb_buffers should return packet counts allocated originally during uvc resume, instead of zero. This version uses round down to return packet counts on Linus' suggestions, or else may lead to buffer destructed if packet size is changed before calling uvc_alloc_urb_buffers() in this kind of case. Signed-off-by: Ming Lei Acked-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/uvc/uvc_video.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c index a95e17329c5b..6ce974d7362f 100644 --- a/drivers/media/video/uvc/uvc_video.c +++ b/drivers/media/video/uvc/uvc_video.c @@ -742,7 +742,7 @@ static int uvc_alloc_urb_buffers(struct uvc_video_device *video, /* Buffers are already allocated, bail out. */ if (video->urb_size) - return 0; + return video->urb_size / psize; /* Compute the number of packets. Bulk endpoints might transfer UVC * payloads accross multiple URBs. -- cgit v1.2.3 From 171f48e254339548a910867c7a77c4a4d16e7e16 Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Thu, 30 Apr 2009 21:03:34 -0300 Subject: V4L/DVB (11660): zoran: fix bug when enumerating format -1 If someone requests a format at fmt->index == (unsigned)-1 and the first format in the array doesn't have the requested type then num will still be -1 when it's compared to fmt->index and there will appear to be a match. Restructure the loop so this can't happen. It's simpler this way too. The unnecessary check for (unsigned)fmt->index < 0 found by Roel Kluin is removed this way too. Signed-off-by: Trent Piepho Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/zoran/zoran_driver.c | 28 +++++++++++++--------------- 1 file changed, 13 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c index 092333b1c34f..643cccaa1aab 100644 --- a/drivers/media/video/zoran/zoran_driver.c +++ b/drivers/media/video/zoran/zoran_driver.c @@ -1863,22 +1863,20 @@ static int zoran_querycap(struct file *file, void *__fh, struct v4l2_capability static int zoran_enum_fmt(struct zoran *zr, struct v4l2_fmtdesc *fmt, int flag) { - int num = -1, i; - - for (i = 0; i < NUM_FORMATS; i++) { - if (zoran_formats[i].flags & flag) - num++; - if (num == fmt->index) - break; + unsigned int num, i; + + for (num = i = 0; i < NUM_FORMATS; i++) { + if (zoran_formats[i].flags & flag && num++ == fmt->index) { + strncpy(fmt->description, zoran_formats[i].name, + sizeof(fmt->description) - 1); + /* fmt struct pre-zeroed, so adding '\0' not neeed */ + fmt->pixelformat = zoran_formats[i].fourcc; + if (zoran_formats[i].flags & ZORAN_FORMAT_COMPRESSED) + fmt->flags |= V4L2_FMT_FLAG_COMPRESSED; + return 0; + } } - if (fmt->index < 0 /* late, but not too late */ || i == NUM_FORMATS) - return -EINVAL; - - strncpy(fmt->description, zoran_formats[i].name, sizeof(fmt->description)-1); - fmt->pixelformat = zoran_formats[i].fourcc; - if (zoran_formats[i].flags & ZORAN_FORMAT_COMPRESSED) - fmt->flags |= V4L2_FMT_FLAG_COMPRESSED; - return 0; + return -EINVAL; } static int zoran_enum_fmt_vid_cap(struct file *file, void *__fh, -- cgit v1.2.3 From 1175d6131f7a89c163227169325ca77a22b18cb2 Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Thu, 30 Apr 2009 21:03:34 -0300 Subject: V4L/DVB (11661): v4l2-ioctl: Check buffer types using g_fmt instead of try_fmt For a number of different ioctls, the v4l2-ioctl code checks that the passed buffer type is supported by the driver. It did this by checking that the driver defined a method for the try_fmt handler for that buffer type. However, try_fmt is optional and a driver might not provide it even though it does support that type. So use g_fmt instead, since that isn't optional. This should fix a problem with VBI capture with saa7146. Signed-off-by: Trent Piepho Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-ioctl.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c index 88f10d6cbc92..feb420733027 100644 --- a/drivers/media/video/v4l2-ioctl.c +++ b/drivers/media/video/v4l2-ioctl.c @@ -544,39 +544,39 @@ static int check_fmt(const struct v4l2_ioctl_ops *ops, enum v4l2_buf_type type) switch (type) { case V4L2_BUF_TYPE_VIDEO_CAPTURE: - if (ops->vidioc_try_fmt_vid_cap) + if (ops->vidioc_g_fmt_vid_cap) return 0; break; case V4L2_BUF_TYPE_VIDEO_OVERLAY: - if (ops->vidioc_try_fmt_vid_overlay) + if (ops->vidioc_g_fmt_vid_overlay) return 0; break; case V4L2_BUF_TYPE_VIDEO_OUTPUT: - if (ops->vidioc_try_fmt_vid_out) + if (ops->vidioc_g_fmt_vid_out) return 0; break; case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY: - if (ops->vidioc_try_fmt_vid_out_overlay) + if (ops->vidioc_g_fmt_vid_out_overlay) return 0; break; case V4L2_BUF_TYPE_VBI_CAPTURE: - if (ops->vidioc_try_fmt_vbi_cap) + if (ops->vidioc_g_fmt_vbi_cap) return 0; break; case V4L2_BUF_TYPE_VBI_OUTPUT: - if (ops->vidioc_try_fmt_vbi_out) + if (ops->vidioc_g_fmt_vbi_out) return 0; break; case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE: - if (ops->vidioc_try_fmt_sliced_vbi_cap) + if (ops->vidioc_g_fmt_sliced_vbi_cap) return 0; break; case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT: - if (ops->vidioc_try_fmt_sliced_vbi_out) + if (ops->vidioc_g_fmt_sliced_vbi_out) return 0; break; case V4L2_BUF_TYPE_PRIVATE: - if (ops->vidioc_try_fmt_type_private) + if (ops->vidioc_g_fmt_type_private) return 0; break; } -- cgit v1.2.3 From 7ecc0cf937e97b6116db09cd13c32467b34c164a Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Thu, 30 Apr 2009 21:03:34 -0300 Subject: V4L/DVB (11662): v4l2-ioctl: Clear buffer type specific trailing fields/padding Some ioctls have structs that are a different size depending on what type of buffer is being used. If the buffer type leaves a field unused or has padding space at the end, this space should be zeroed out. The problems with S_FMT and REQBUFS were original identified and patched by Marton Nemeth . Signed-off-by: Trent Piepho Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-ioctl.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'drivers') diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c index feb420733027..be64a502ea27 100644 --- a/drivers/media/video/v4l2-ioctl.c +++ b/drivers/media/video/v4l2-ioctl.c @@ -42,6 +42,12 @@ printk(KERN_DEBUG "%s: " fmt, vfd->name, ## arg);\ } while (0) +/* Zero out the end of the struct pointed to by p. Everthing after, but + * not including, the specified field is cleared. */ +#define CLEAR_AFTER_FIELD(p, field) \ + memset((u8 *)(p) + offsetof(typeof(*(p)), field) + sizeof((p)->field), \ + 0, sizeof(*(p)) - offsetof(typeof(*(p)), field) - sizeof((p)->field)) + struct std_descr { v4l2_std_id std; const char *descr; @@ -782,44 +788,53 @@ static long __video_do_ioctl(struct file *file, switch (f->type) { case V4L2_BUF_TYPE_VIDEO_CAPTURE: + CLEAR_AFTER_FIELD(f, fmt.pix); v4l_print_pix_fmt(vfd, &f->fmt.pix); if (ops->vidioc_s_fmt_vid_cap) ret = ops->vidioc_s_fmt_vid_cap(file, fh, f); break; case V4L2_BUF_TYPE_VIDEO_OVERLAY: + CLEAR_AFTER_FIELD(f, fmt.win); if (ops->vidioc_s_fmt_vid_overlay) ret = ops->vidioc_s_fmt_vid_overlay(file, fh, f); break; case V4L2_BUF_TYPE_VIDEO_OUTPUT: + CLEAR_AFTER_FIELD(f, fmt.pix); v4l_print_pix_fmt(vfd, &f->fmt.pix); if (ops->vidioc_s_fmt_vid_out) ret = ops->vidioc_s_fmt_vid_out(file, fh, f); break; case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY: + CLEAR_AFTER_FIELD(f, fmt.win); if (ops->vidioc_s_fmt_vid_out_overlay) ret = ops->vidioc_s_fmt_vid_out_overlay(file, fh, f); break; case V4L2_BUF_TYPE_VBI_CAPTURE: + CLEAR_AFTER_FIELD(f, fmt.vbi); if (ops->vidioc_s_fmt_vbi_cap) ret = ops->vidioc_s_fmt_vbi_cap(file, fh, f); break; case V4L2_BUF_TYPE_VBI_OUTPUT: + CLEAR_AFTER_FIELD(f, fmt.vbi); if (ops->vidioc_s_fmt_vbi_out) ret = ops->vidioc_s_fmt_vbi_out(file, fh, f); break; case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE: + CLEAR_AFTER_FIELD(f, fmt.sliced); if (ops->vidioc_s_fmt_sliced_vbi_cap) ret = ops->vidioc_s_fmt_sliced_vbi_cap(file, fh, f); break; case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT: + CLEAR_AFTER_FIELD(f, fmt.sliced); if (ops->vidioc_s_fmt_sliced_vbi_out) ret = ops->vidioc_s_fmt_sliced_vbi_out(file, fh, f); break; case V4L2_BUF_TYPE_PRIVATE: + /* CLEAR_AFTER_FIELD(f, fmt.raw_data); <- does nothing */ if (ops->vidioc_s_fmt_type_private) ret = ops->vidioc_s_fmt_type_private(file, fh, f); @@ -836,46 +851,55 @@ static long __video_do_ioctl(struct file *file, v4l2_type_names)); switch (f->type) { case V4L2_BUF_TYPE_VIDEO_CAPTURE: + CLEAR_AFTER_FIELD(f, fmt.pix); if (ops->vidioc_try_fmt_vid_cap) ret = ops->vidioc_try_fmt_vid_cap(file, fh, f); if (!ret) v4l_print_pix_fmt(vfd, &f->fmt.pix); break; case V4L2_BUF_TYPE_VIDEO_OVERLAY: + CLEAR_AFTER_FIELD(f, fmt.win); if (ops->vidioc_try_fmt_vid_overlay) ret = ops->vidioc_try_fmt_vid_overlay(file, fh, f); break; case V4L2_BUF_TYPE_VIDEO_OUTPUT: + CLEAR_AFTER_FIELD(f, fmt.pix); if (ops->vidioc_try_fmt_vid_out) ret = ops->vidioc_try_fmt_vid_out(file, fh, f); if (!ret) v4l_print_pix_fmt(vfd, &f->fmt.pix); break; case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY: + CLEAR_AFTER_FIELD(f, fmt.win); if (ops->vidioc_try_fmt_vid_out_overlay) ret = ops->vidioc_try_fmt_vid_out_overlay(file, fh, f); break; case V4L2_BUF_TYPE_VBI_CAPTURE: + CLEAR_AFTER_FIELD(f, fmt.vbi); if (ops->vidioc_try_fmt_vbi_cap) ret = ops->vidioc_try_fmt_vbi_cap(file, fh, f); break; case V4L2_BUF_TYPE_VBI_OUTPUT: + CLEAR_AFTER_FIELD(f, fmt.vbi); if (ops->vidioc_try_fmt_vbi_out) ret = ops->vidioc_try_fmt_vbi_out(file, fh, f); break; case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE: + CLEAR_AFTER_FIELD(f, fmt.sliced); if (ops->vidioc_try_fmt_sliced_vbi_cap) ret = ops->vidioc_try_fmt_sliced_vbi_cap(file, fh, f); break; case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT: + CLEAR_AFTER_FIELD(f, fmt.sliced); if (ops->vidioc_try_fmt_sliced_vbi_out) ret = ops->vidioc_try_fmt_sliced_vbi_out(file, fh, f); break; case V4L2_BUF_TYPE_PRIVATE: + /* CLEAR_AFTER_FIELD(f, fmt.raw_data); <- does nothing */ if (ops->vidioc_try_fmt_type_private) ret = ops->vidioc_try_fmt_type_private(file, fh, f); @@ -898,6 +922,9 @@ static long __video_do_ioctl(struct file *file, if (ret) break; + if (p->type < V4L2_BUF_TYPE_PRIVATE) + CLEAR_AFTER_FIELD(p, memory); + ret = ops->vidioc_reqbufs(file, fh, p); dbgarg(cmd, "count=%d, type=%s, memory=%s\n", p->count, -- cgit v1.2.3 From 52c3d29cfa2fa02f525a01abf28abf48f49801bf Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Mon, 20 Apr 2009 22:42:00 -0300 Subject: V4L/DVB (11664): cx23885: Frontend wasn't locking on HVR-1500 The boards control struct wasn't updated when (presumably) all of the other drivers migrated from using scode_table to specifying the demod. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx23885/cx23885-dvb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 0c49a98213c4..1dc070da8652 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -472,7 +472,7 @@ static int dvb_register(struct cx23885_tsport *port) static struct xc2028_ctrl ctl = { .fname = XC2028_DEFAULT_FIRMWARE, .max_len = 64, - .scode_table = XC3028_FE_OREN538, + .demod = XC3028_FE_OREN538, }; fe = dvb_attach(xc2028_attach, -- cgit v1.2.3 From 34a7864db1bc6d9ceb466251957fccf90c7106f8 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 2 May 2009 07:56:46 -0300 Subject: V4L/DVB (11668): ivtv: fix compiler warning. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ivtv/ivtv-driver.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c index b0195e8ee4d1..db2ac9a99acd 100644 --- a/drivers/media/video/ivtv/ivtv-driver.c +++ b/drivers/media/video/ivtv/ivtv-driver.c @@ -305,14 +305,17 @@ int ivtv_waitq(wait_queue_head_t *waitq) /* Generic utility functions */ int ivtv_msleep_timeout(unsigned int msecs, int intr) { - int ret; int timeout = msecs_to_jiffies(msecs); do { set_current_state(intr ? TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE); timeout = schedule_timeout(timeout); - if (intr && (ret = signal_pending(current))) - return ret; + if (intr) { + int ret = signal_pending(current); + + if (ret) + return ret; + } } while (timeout); return 0; } -- cgit v1.2.3 From 7564f67d5b38eb814e67edd8ba0c70fd8eb475b6 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 2 May 2009 08:12:36 -0300 Subject: V4L/DVB (11669): uvc: fix compile warning The 2.6.30 kernel generates this warning: uvc_driver.c:1729: warning: 'ret' may be used uninitialized in this function I guess some new warning flag must have been turned on since this warning didn't appear with older kernels (gcc version 4.3.1). It's also a bogus warning, but since this code didn't comply to the coding standard anyway I've modified it to 1) remove the warning and 2) conform to the coding standard. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/uvc/uvc_driver.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c index 399412d7f020..507dc85646b2 100644 --- a/drivers/media/video/uvc/uvc_driver.c +++ b/drivers/media/video/uvc/uvc_driver.c @@ -1726,14 +1726,17 @@ static int uvc_suspend(struct usb_interface *intf, pm_message_t message) static int __uvc_resume(struct usb_interface *intf, int reset) { struct uvc_device *dev = usb_get_intfdata(intf); - int ret; uvc_trace(UVC_TRACE_SUSPEND, "Resuming interface %u\n", intf->cur_altsetting->desc.bInterfaceNumber); if (intf->cur_altsetting->desc.bInterfaceSubClass == SC_VIDEOCONTROL) { - if (reset && (ret = uvc_ctrl_resume_device(dev)) < 0) - return ret; + if (reset) { + int ret = uvc_ctrl_resume_device(dev); + + if (ret < 0) + return ret; + } return uvc_status_resume(dev); } -- cgit v1.2.3 From ec105a42ac397366e05888ea96503ab3b57f79ad Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 2 May 2009 11:10:23 -0300 Subject: V4L/DVB (11674): ivtv: fix incorrect bit tests Found the coccinelle tool. Thanks-to: Julia Lawall Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ivtv/ivtv-ioctl.c | 5 +++-- drivers/media/video/ivtv/ivtv-irq.c | 2 +- drivers/media/video/ivtv/ivtv-yuv.c | 3 ++- drivers/media/video/ivtv/ivtvfb.c | 3 ++- 4 files changed, 8 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c index 4a2d464f055e..c342a9fe983e 100644 --- a/drivers/media/video/ivtv/ivtv-ioctl.c +++ b/drivers/media/video/ivtv/ivtv-ioctl.c @@ -180,7 +180,7 @@ int ivtv_set_speed(struct ivtv *itv, int speed) /* Wait for any DMA to finish */ prepare_to_wait(&itv->dma_waitq, &wait, TASK_INTERRUPTIBLE); - while (itv->i_flags & IVTV_F_I_DMA) { + while (test_bit(IVTV_F_I_DMA, &itv->i_flags)) { got_sig = signal_pending(current); if (got_sig) break; @@ -1710,7 +1710,8 @@ static int ivtv_decoder_ioctls(struct file *filp, unsigned int cmd, void *arg) we are waiting unlock first and later lock again. */ mutex_unlock(&itv->serialize_lock); prepare_to_wait(&itv->event_waitq, &wait, TASK_INTERRUPTIBLE); - if ((itv->i_flags & (IVTV_F_I_EV_DEC_STOPPED|IVTV_F_I_EV_VSYNC)) == 0) + if (!test_bit(IVTV_F_I_EV_DEC_STOPPED, &itv->i_flags) && + !test_bit(IVTV_F_I_EV_VSYNC, &itv->i_flags)) schedule(); finish_wait(&itv->event_waitq, &wait); mutex_lock(&itv->serialize_lock); diff --git a/drivers/media/video/ivtv/ivtv-irq.c b/drivers/media/video/ivtv/ivtv-irq.c index 01c14d2b381a..cd9db0bf33bf 100644 --- a/drivers/media/video/ivtv/ivtv-irq.c +++ b/drivers/media/video/ivtv/ivtv-irq.c @@ -196,7 +196,7 @@ static int stream_enc_dma_append(struct ivtv_stream *s, u32 data[CX2341X_MBOX_MA bytes_needed, s->name); return -1; } - if (rc && !s->buffers_stolen && (s->s_flags & IVTV_F_S_APPL_IO)) { + if (rc && !s->buffers_stolen && test_bit(IVTV_F_S_APPL_IO, &s->s_flags)) { IVTV_WARN("All %s stream buffers are full. Dropping data.\n", s->name); IVTV_WARN("Cause: the application is not reading fast enough.\n"); } diff --git a/drivers/media/video/ivtv/ivtv-yuv.c b/drivers/media/video/ivtv/ivtv-yuv.c index 7912ed6b72ee..c0875378acc2 100644 --- a/drivers/media/video/ivtv/ivtv-yuv.c +++ b/drivers/media/video/ivtv/ivtv-yuv.c @@ -1063,7 +1063,8 @@ static int ivtv_yuv_udma_frame(struct ivtv *itv, struct ivtv_dma_frame *args) prepare_to_wait(&itv->dma_waitq, &wait, TASK_INTERRUPTIBLE); /* if no UDMA is pending and no UDMA is in progress, then the DMA is finished */ - while (itv->i_flags & (IVTV_F_I_UDMA_PENDING | IVTV_F_I_UDMA)) { + while (test_bit(IVTV_F_I_UDMA_PENDING, &itv->i_flags) || + test_bit(IVTV_F_I_UDMA, &itv->i_flags)) { /* don't interrupt if the DMA is in progress but break off a still pending DMA. */ got_sig = signal_pending(current); diff --git a/drivers/media/video/ivtv/ivtvfb.c b/drivers/media/video/ivtv/ivtvfb.c index 66e6eb513076..fa6bb85cb4b0 100644 --- a/drivers/media/video/ivtv/ivtvfb.c +++ b/drivers/media/video/ivtv/ivtvfb.c @@ -298,7 +298,8 @@ static int ivtvfb_prep_dec_dma_to_device(struct ivtv *itv, prepare_to_wait(&itv->dma_waitq, &wait, TASK_INTERRUPTIBLE); /* if no UDMA is pending and no UDMA is in progress, then the DMA is finished */ - while (itv->i_flags & (IVTV_F_I_UDMA_PENDING | IVTV_F_I_UDMA)) { + while (test_bit(IVTV_F_I_UDMA_PENDING, &itv->i_flags) || + test_bit(IVTV_F_I_UDMA, &itv->i_flags)) { /* don't interrupt if the DMA is in progress but break off a still pending DMA. */ got_sig = signal_pending(current); -- cgit v1.2.3 From dc47b77897b33fca328bd4cd487224808b740ce3 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 2 May 2009 11:52:35 -0300 Subject: V4L/DVB (11675): ivtv/radio: fix V4L2_TUNER_MODE/V4L2_TUNER_SUB confusion V4L2_TUNER_MODE_ was used in a few places where V4L2_TUNER_SUB_ should have been used. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/radio-sf16fmi.c | 2 +- drivers/media/radio/radio-sf16fmr2.c | 2 +- drivers/media/video/ivtv/ivtv-gpio.c | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/media/radio/radio-sf16fmi.c b/drivers/media/radio/radio-sf16fmi.c index 1dba8f0832a0..5cf6c45b91fe 100644 --- a/drivers/media/radio/radio-sf16fmi.c +++ b/drivers/media/radio/radio-sf16fmi.c @@ -153,7 +153,7 @@ static int vidioc_g_tuner(struct file *file, void *priv, mult = (fmi->flags & V4L2_TUNER_CAP_LOW) ? 1 : 1000; v->rangelow = RSF16_MINFREQ / mult; v->rangehigh = RSF16_MAXFREQ / mult; - v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_MODE_STEREO; + v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; v->capability = fmi->flags & V4L2_TUNER_CAP_LOW; v->audmode = V4L2_TUNER_MODE_STEREO; v->signal = fmi_getsigstr(fmi); diff --git a/drivers/media/radio/radio-sf16fmr2.c b/drivers/media/radio/radio-sf16fmr2.c index c09ca8600ea1..935ff9bcdfcc 100644 --- a/drivers/media/radio/radio-sf16fmr2.c +++ b/drivers/media/radio/radio-sf16fmr2.c @@ -233,7 +233,7 @@ static int vidioc_g_tuner(struct file *file, void *priv, mult = (fmr2->flags & V4L2_TUNER_CAP_LOW) ? 1 : 1000; v->rangelow = RSF16_MINFREQ / mult; v->rangehigh = RSF16_MAXFREQ / mult; - v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_MODE_STEREO; + v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; v->capability = fmr2->flags&V4L2_TUNER_CAP_LOW; v->audmode = fmr2->stereo ? V4L2_TUNER_MODE_STEREO: V4L2_TUNER_MODE_MONO; diff --git a/drivers/media/video/ivtv/ivtv-gpio.c b/drivers/media/video/ivtv/ivtv-gpio.c index ceb05bdcaf62..85ac707228e7 100644 --- a/drivers/media/video/ivtv/ivtv-gpio.c +++ b/drivers/media/video/ivtv/ivtv-gpio.c @@ -190,8 +190,8 @@ static int subdev_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) mask = itv->card->gpio_audio_detect.mask; if (mask == 0 || (read_reg(IVTV_REG_GPIO_IN) & mask)) - vt->rxsubchans = V4L2_TUNER_MODE_STEREO | - V4L2_TUNER_MODE_LANG1 | V4L2_TUNER_MODE_LANG2; + vt->rxsubchans = V4L2_TUNER_SUB_STEREO | + V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; else vt->rxsubchans = V4L2_TUNER_SUB_MONO; return 0; -- cgit v1.2.3 From e047a0f57dabd57957c9dab744a02da01d445b0a Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 3 May 2009 04:58:04 -0300 Subject: V4L/DVB (11679): cafe_ccic: fix sensor detection Due to an uninitialized chip.ident field the chip identification failed. Thanks-to: Saeed Bishara Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cafe_ccic.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c index 5f582726985d..e2d49cdb9d77 100644 --- a/drivers/media/video/cafe_ccic.c +++ b/drivers/media/video/cafe_ccic.c @@ -774,6 +774,7 @@ static int cafe_cam_init(struct cafe_camera *cam) ret = __cafe_cam_reset(cam); if (ret) goto out; + chip.ident == V4L2_IDENT_NONE; chip.match.type = V4L2_CHIP_MATCH_I2C_ADDR; chip.match.addr = cam->sensor_addr; ret = sensor_call(cam, core, g_chip_ident, &chip); -- cgit v1.2.3 From 90c69f29cfc436b21a3181f8034f19f74543507a Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 5 May 2009 08:08:38 -0300 Subject: V4L/DVB (11680): cafe_ccic: use = instead of == for setting a value at a var /home/v4l/master/v4l/cafe_ccic.c: In function 'cafe_cam_init': /home/v4l/master/v4l/cafe_ccic.c:778: warning: statement with no effect Cc: Hans Verkuil Cc: saeed bishara Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cafe_ccic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c index e2d49cdb9d77..c4d181dde1ca 100644 --- a/drivers/media/video/cafe_ccic.c +++ b/drivers/media/video/cafe_ccic.c @@ -774,7 +774,7 @@ static int cafe_cam_init(struct cafe_camera *cam) ret = __cafe_cam_reset(cam); if (ret) goto out; - chip.ident == V4L2_IDENT_NONE; + chip.ident = V4L2_IDENT_NONE; chip.match.type = V4L2_CHIP_MATCH_I2C_ADDR; chip.match.addr = cam->sensor_addr; ret = sensor_call(cam, core, g_chip_ident, &chip); -- cgit v1.2.3 From fd18de50b9e7965f93d231e7390436fb8900c0e6 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sun, 10 May 2009 23:57:41 +0100 Subject: intel-iommu: PAE memory corruption fix PAGE_MASK is 0xFFFFF000 on i386 -- even with PAE. So it's not sufficient to ensure that you use phys_addr_t or uint64_t everywhere you handle physical addresses -- you also have to avoid using the construct 'addr & PAGE_MASK', because that will strip the high 32 bits of the address. This patch avoids that problem by using PHYSICAL_PAGE_MASK instead of PAGE_MASK where appropriate. It leaves '& PAGE_MASK' in a few instances that don't matter -- where it's being used on the virtual bus addresses we're dishing out, which are 32-bit anyway. Since PHYSICAL_PAGE_MASK is not present on other architectures, we have to define it (to PAGE_MASK) if it's not already defined. Maybe it would be better just to fix PAGE_MASK for i386/PAE? Signed-off-by: David Woodhouse Signed-off-by: Linus Torvalds --- drivers/pci/intel-iommu.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 001b328adf80..a563fbe559d0 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -59,6 +59,10 @@ #define DMA_32BIT_PFN IOVA_PFN(DMA_BIT_MASK(32)) #define DMA_64BIT_PFN IOVA_PFN(DMA_BIT_MASK(64)) +#ifndef PHYSICAL_PAGE_MASK +#define PHYSICAL_PAGE_MASK PAGE_MASK +#endif + /* global iommu list, set NULL for ignored DMAR units */ static struct intel_iommu **g_iommus; @@ -1216,7 +1220,7 @@ static void dmar_init_reserved_ranges(void) if (!r->flags || !(r->flags & IORESOURCE_MEM)) continue; addr = r->start; - addr &= PAGE_MASK; + addr &= PHYSICAL_PAGE_MASK; size = r->end - addr; size = PAGE_ALIGN(size); iova = reserve_iova(&reserved_iova_list, IOVA_PFN(addr), @@ -2173,7 +2177,8 @@ static dma_addr_t __intel_map_single(struct device *hwdev, phys_addr_t paddr, * is not a big problem */ ret = domain_page_mapping(domain, start_paddr, - ((u64)paddr) & PAGE_MASK, size, prot); + ((u64)paddr) & PHYSICAL_PAGE_MASK, + size, prot); if (ret) goto error; @@ -2463,8 +2468,8 @@ static int intel_map_sg(struct device *hwdev, struct scatterlist *sglist, int ne addr = page_to_phys(sg_page(sg)) + sg->offset; size = aligned_size((u64)addr, sg->length); ret = domain_page_mapping(domain, start_addr + offset, - ((u64)addr) & PAGE_MASK, - size, prot); + ((u64)addr) & PHYSICAL_PAGE_MASK, + size, prot); if (ret) { /* clear the page */ dma_pte_clear_range(domain, start_addr, -- cgit v1.2.3 From f5208997087e6eb2096532b5a313eeb236535bdc Mon Sep 17 00:00:00 2001 From: Zoltan Karcagi Date: Wed, 6 May 2009 16:30:21 +0200 Subject: HID: fix dropped device-specific quirks Device-specific quirks are set up correctly in their respective vendor-specific driver, then get overwritten in usbhid_parse(). This is only issue for device-specific NOGET quirks being set by driver for a few devices out there. Signed-off-by: Zoltan Karcagi Signed-off-by: Jiri Kosina --- drivers/hid/usbhid/hid-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index 900ce18dd549..ac8049b5f1e9 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -898,7 +898,7 @@ static int usbhid_parse(struct hid_device *hid) goto err; } - hid->quirks = quirks; + hid->quirks |= quirks; return 0; err: -- cgit v1.2.3 From b820aabf6cb987fd03d85b0b5f599685051e0426 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 6 May 2009 15:48:49 -0400 Subject: HID: add NOGET quirk for devices from CH Products This patch (as1240) adds the NOGET quirk for three devices from CH Products: the Pro pedals, the Combatstick joystick, and the Flight-Sim yoke. Without these quirks, the devices haven't worked for many kernel releases. Sometimes replugging them after boot-up would get them to work and sometimes they wouldn't work at all. Signed-off-by: Alan Stern Reported-by: Sean Hildebrand Reported-by: Sid Boyce Tested-by: Sean Hildebrand Tested-by: Sid Boyce Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 5 +++++ drivers/hid/usbhid/hid-quirks.c | 3 +++ 2 files changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index aa1b995dd033..4d5ee2bbc62b 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -113,6 +113,11 @@ #define USB_VENDOR_ID_BERKSHIRE 0x0c98 #define USB_DEVICE_ID_BERKSHIRE_PCWD 0x1140 +#define USB_VENDOR_ID_CH 0x068e +#define USB_DEVICE_ID_CH_PRO_PEDALS 0x00f2 +#define USB_DEVICE_ID_CH_COMBATSTICK 0x00f4 +#define USB_DEVICE_ID_CH_FLIGHT_SIM_YOKE 0x00ff + #define USB_VENDOR_ID_CHERRY 0x046a #define USB_DEVICE_ID_CHERRY_CYMOTION 0x0023 diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c index 4391717d2519..d8f7423f363e 100644 --- a/drivers/hid/usbhid/hid-quirks.c +++ b/drivers/hid/usbhid/hid-quirks.c @@ -50,6 +50,9 @@ static const struct hid_blacklist { { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_2PORTKVM, HID_QUIRK_NOGET }, { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVM, HID_QUIRK_NOGET }, { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET }, + { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_COMBATSTICK, HID_QUIRK_NOGET }, + { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FLIGHT_SIM_YOKE, HID_QUIRK_NOGET }, + { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_PRO_PEDALS, HID_QUIRK_NOGET }, { USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET }, { USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET }, { USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET }, -- cgit v1.2.3 From 842faa6c1a1d6faddf3377948e5cf214812c6c90 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 10 May 2009 01:06:54 +0900 Subject: libata: fix attach error handling New device attach path in ata_eh_revalidate_and_attach() is divided into two separate loops because ATA requires IDENTIFY to be issued to slave first while the user expects to see device probe messages from the master device. new_mask is used to track which devices are the new ones between the first loop and the second. This usually works well but if an error occurs during configuration stage, ata_dev_revalidate_and_attach() returns with error code and forgets new_mask. On the retry run, dev->class is set and new_mask for the device is clear, so the device just gets revalidated and thus ends up skipping post-configuration procedure including scheduling of SCSI_HOTPLUG for the device. When this occurs, ATA part of probing works fine but SCSI probing usually doesn't happen and makes the device unreachable. The behavior has been around for a very long time but it has been uncovered with the recent addition of 1_5_GBPS horkage which uses -EAGAIN return value from ata_dev_configure() to restart the probing sequence after forcing cable speed. This can be fixed by making sure dev->class is permanently set only after all configurations are successfully complete. Fix it. Signed-off-by: Tejun Heo Reported-by: Tim Connors Signed-off-by: Jeff Garzik --- drivers/ata/libata-eh.c | 21 +++++++++++++++++---- 1 file changed, 17 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 01831312c360..eb8b94016c01 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -2783,6 +2783,12 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link, } else if (dev->class == ATA_DEV_UNKNOWN && ehc->tries[dev->devno] && ata_class_enabled(ehc->classes[dev->devno])) { + /* Temporarily set dev->class, it will be + * permanently set once all configurations are + * complete. This is necessary because new + * device configuration is done in two + * separate loops. + */ dev->class = ehc->classes[dev->devno]; if (dev->class == ATA_DEV_PMP) @@ -2790,6 +2796,11 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link, else rc = ata_dev_read_id(dev, &dev->class, readid_flags, dev->id); + + /* read_id might have changed class, store and reset */ + ehc->classes[dev->devno] = dev->class; + dev->class = ATA_DEV_UNKNOWN; + switch (rc) { case 0: /* clear error info accumulated during probe */ @@ -2799,13 +2810,11 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link, case -ENOENT: /* IDENTIFY was issued to non-existent * device. No need to reset. Just - * thaw and kill the device. + * thaw and ignore the device. */ ata_eh_thaw_port(ap); - dev->class = ATA_DEV_UNKNOWN; break; default: - dev->class = ATA_DEV_UNKNOWN; goto err; } } @@ -2826,11 +2835,15 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link, dev->class == ATA_DEV_PMP) continue; + dev->class = ehc->classes[dev->devno]; + ehc->i.flags |= ATA_EHI_PRINTINFO; rc = ata_dev_configure(dev); ehc->i.flags &= ~ATA_EHI_PRINTINFO; - if (rc) + if (rc) { + dev->class = ATA_DEV_UNKNOWN; goto err; + } spin_lock_irqsave(ap->lock, flags); ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG; -- cgit v1.2.3 From 29b7e43c310bdc20d240c7674d9073f6c1c12a3f Mon Sep 17 00:00:00 2001 From: Martin Michlmayr Date: Mon, 4 May 2009 20:58:50 +0200 Subject: sata_mv: use new sata phy register settings for new devices Marvell's new SoC (65 nano) needs different settings for its SATA PHY registers. Tested-by: Martin Michlmayr Signed-off-by: Saeed Bishara Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 69 +++++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 67 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 870dcfd82357..23714aefb825 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -293,6 +293,10 @@ enum { FISCFG_WAIT_DEV_ERR = (1 << 8), /* wait for host on DevErr */ FISCFG_SINGLE_SYNC = (1 << 16), /* SYNC on DMA activation */ + PHY_MODE9_GEN2 = 0x398, + PHY_MODE9_GEN1 = 0x39c, + PHYCFG_OFS = 0x3a0, /* only in 65n devices */ + MV5_PHY_MODE = 0x74, MV5_LTMODE = 0x30, MV5_PHY_CTL = 0x0C, @@ -609,6 +613,8 @@ static int mv_soc_reset_hc(struct mv_host_priv *hpriv, static void mv_soc_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio); static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio); +static void mv_soc_65n_phy_errata(struct mv_host_priv *hpriv, + void __iomem *mmio, unsigned int port); static void mv_reset_pci_bus(struct ata_host *host, void __iomem *mmio); static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio, unsigned int port_no); @@ -807,6 +813,14 @@ static const struct mv_hw_ops mv_soc_ops = { .reset_bus = mv_soc_reset_bus, }; +static const struct mv_hw_ops mv_soc_65n_ops = { + .phy_errata = mv_soc_65n_phy_errata, + .enable_leds = mv_soc_enable_leds, + .reset_hc = mv_soc_reset_hc, + .reset_flash = mv_soc_reset_flash, + .reset_bus = mv_soc_reset_bus, +}; + /* * Functions */ @@ -3397,6 +3411,53 @@ static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio) return; } +static void mv_soc_65n_phy_errata(struct mv_host_priv *hpriv, + void __iomem *mmio, unsigned int port) +{ + void __iomem *port_mmio = mv_port_base(mmio, port); + u32 reg; + + reg = readl(port_mmio + PHY_MODE3); + reg &= ~(0x3 << 27); /* SELMUPF (bits 28:27) to 1 */ + reg |= (0x1 << 27); + reg &= ~(0x3 << 29); /* SELMUPI (bits 30:29) to 1 */ + reg |= (0x1 << 29); + writel(reg, port_mmio + PHY_MODE3); + + reg = readl(port_mmio + PHY_MODE4); + reg &= ~0x1; /* SATU_OD8 (bit 0) to 0, reserved bit 16 must be set */ + reg |= (0x1 << 16); + writel(reg, port_mmio + PHY_MODE4); + + reg = readl(port_mmio + PHY_MODE9_GEN2); + reg &= ~0xf; /* TXAMP[3:0] (bits 3:0) to 8 */ + reg |= 0x8; + reg &= ~(0x1 << 14); /* TXAMP[4] (bit 14) to 0 */ + writel(reg, port_mmio + PHY_MODE9_GEN2); + + reg = readl(port_mmio + PHY_MODE9_GEN1); + reg &= ~0xf; /* TXAMP[3:0] (bits 3:0) to 8 */ + reg |= 0x8; + reg &= ~(0x1 << 14); /* TXAMP[4] (bit 14) to 0 */ + writel(reg, port_mmio + PHY_MODE9_GEN1); +} + +/** + * soc_is_65 - check if the soc is 65 nano device + * + * Detect the type of the SoC, this is done by reading the PHYCFG_OFS + * register, this register should contain non-zero value and it exists only + * in the 65 nano devices, when reading it from older devices we get 0. + */ +static bool soc_is_65n(struct mv_host_priv *hpriv) +{ + void __iomem *port0_mmio = mv_port_base(hpriv->base, 0); + + if (readl(port0_mmio + PHYCFG_OFS)) + return true; + return false; +} + static void mv_setup_ifcfg(void __iomem *port_mmio, int want_gen2i) { u32 ifcfg = readl(port_mmio + SATA_IFCFG); @@ -3737,7 +3798,10 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx) } break; case chip_soc: - hpriv->ops = &mv_soc_ops; + if (soc_is_65n(hpriv)) + hpriv->ops = &mv_soc_65n_ops; + else + hpriv->ops = &mv_soc_ops; hp_flags |= MV_HP_FLAG_SOC | MV_HP_GEN_IIE | MV_HP_ERRATA_60X1C0; break; @@ -3800,7 +3864,8 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx) n_hc = mv_get_hc_count(host->ports[0]->flags); for (port = 0; port < host->n_ports; port++) - hpriv->ops->read_preamp(hpriv, port, mmio); + if (hpriv->ops->read_preamp) + hpriv->ops->read_preamp(hpriv, port, mmio); rc = hpriv->ops->reset_hc(hpriv, mmio, n_hc); if (rc) -- cgit v1.2.3 From 6ad58b245a543461bd55d51b8303f555419687b2 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 20 Apr 2009 22:31:25 +0200 Subject: pata_pdc202xx_old: fix UDMA33 handling The original driver doesn't use 66 MHz clock for UDMA33. [ The alternative solution would be to adjust UDMA33 timings for 66 MHz clock but I think that it is safer to stick with old & tested behavior for now. ] Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Jeff Garzik --- drivers/ata/pata_pdc202xx_old.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c index 5fedb3d4032b..2f3c9bed63d9 100644 --- a/drivers/ata/pata_pdc202xx_old.c +++ b/drivers/ata/pata_pdc202xx_old.c @@ -2,7 +2,7 @@ * pata_pdc202xx_old.c - Promise PDC202xx PATA for new ATA layer * (C) 2005 Red Hat Inc * Alan Cox - * (C) 2007 Bartlomiej Zolnierkiewicz + * (C) 2007,2009 Bartlomiej Zolnierkiewicz * * Based in part on linux/drivers/ide/pci/pdc202xx_old.c * @@ -158,7 +158,7 @@ static void pdc2026x_bmdma_start(struct ata_queued_cmd *qc) u32 len; /* Check we keep host level locking here */ - if (adev->dma_mode >= XFER_UDMA_2) + if (adev->dma_mode > XFER_UDMA_2) iowrite8(ioread8(clock) | sel66, clock); else iowrite8(ioread8(clock) & ~sel66, clock); @@ -212,7 +212,7 @@ static void pdc2026x_bmdma_stop(struct ata_queued_cmd *qc) iowrite8(ioread8(clock) & ~sel66, clock); } /* Flip back to 33Mhz for PIO */ - if (adev->dma_mode >= XFER_UDMA_2) + if (adev->dma_mode > XFER_UDMA_2) iowrite8(ioread8(clock) & ~sel66, clock); ata_bmdma_stop(qc); pdc202xx_set_piomode(ap, adev); -- cgit v1.2.3 From 6f9c1ea2c1cea2de3e5670a7cd98d9f7316b0952 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 23 Apr 2009 09:55:28 +0900 Subject: libata: clear ering on resume Error timestamps are in jiffies which doesn't run while suspended and PHY events during resume isn't too uncommon. When the two are combined, it can lead to unnecessary speed downs if the machine is suspended and resumed repeatedly. Clear error history on resume. This was reported and verified in bnc#486803 by Vladimir Botka. Signed-off-by: Tejun Heo Reported-by: Vladimir Botka Signed-off-by: Jeff Garzik --- drivers/ata/libata-eh.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index eb8b94016c01..94919ad03df1 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -3507,6 +3507,8 @@ static void ata_eh_handle_port_suspend(struct ata_port *ap) */ static void ata_eh_handle_port_resume(struct ata_port *ap) { + struct ata_link *link; + struct ata_device *dev; unsigned long flags; int rc = 0; @@ -3521,6 +3523,17 @@ static void ata_eh_handle_port_resume(struct ata_port *ap) WARN_ON(!(ap->pflags & ATA_PFLAG_SUSPENDED)); + /* + * Error timestamps are in jiffies which doesn't run while + * suspended and PHY events during resume isn't too uncommon. + * When the two are combined, it can lead to unnecessary speed + * downs if the machine is suspended and resumed repeatedly. + * Clear error history. + */ + ata_for_each_link(link, ap, HOST_FIRST) + ata_for_each_dev(dev, link, ALL) + ata_ering_clear(&dev->ering); + ata_acpi_set_state(ap, PMSG_ON); if (ap->ops->port_resume) -- cgit v1.2.3 From f0d0613dedda4891ecb1977e4d02bf9be93882a3 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sun, 26 Apr 2009 16:33:34 +0200 Subject: libata: fix suspend/resume for ATA SEMB devices 79b42babbac2a5a522b8e269fb2811b6e1063030 fixed identifying ATA devices reporting 3c/c3 signature which belongs to SEMB devices now. However, suspending the machine with such device (WDC WD2500AAJS-6 01.0) fails with the following: hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/100 mode selected hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hdb: UDMA/66 mode selected sd 1:0:0:0: [sda] Starting disk ata5: SATA link down (SStatus 0 SControl 300) ata1: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) ata2: softreset failed (device not ready) ata2: failed due to HW bug, retry pmp=0 ata4: softreset failed (device not ready) ata4: failed due to HW bug, retry pmp=0 ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: class mismatch 1 != 7 ata2.00: revalidation failed (errno=-19) ata2: limiting SATA link speed to 1.5 Gbps ata4.00: configured for UDMA/133 ata2: softreset failed (device not ready) ata2: failed due to HW bug, retry pmp=0 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata2.00: class mismatch 1 != 7 ata2.00: revalidation failed (errno=-19) ata2.00: disabled sd 1:0:0:0: rejecting I/O to offline device sd 1:0:0:0: [sda] START_STOP FAILED sd 1:0:0:0: [sda] Result: hostbyte=0x01 driverbyte=0x00 PM: Device 1:0:0:0 failed to thaw: error 65536 sd 3:0:0:0: [sdb] Starting disk due to a class mismatch in ata_dev_revalidate(). Fix it by adding the ATA_DEV_SEMB device class to the check. CC: Tejun Heo Signed-off-by: Borislav Petkov Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 17c5d48a75d2..c9242301cfa1 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4091,7 +4091,9 @@ int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class, /* fail early if !ATA && !ATAPI to avoid issuing [P]IDENTIFY to PMP */ if (ata_class_enabled(new_class) && - new_class != ATA_DEV_ATA && new_class != ATA_DEV_ATAPI) { + new_class != ATA_DEV_ATA && + new_class != ATA_DEV_ATAPI && + new_class != ATA_DEV_SEMB) { ata_dev_printk(dev, KERN_INFO, "class mismatch %u != %u\n", dev->class, new_class); rc = -ENODEV; -- cgit v1.2.3 From ea7a5ed58fa40c76ff87c0dd960f1d785009dd6d Mon Sep 17 00:00:00 2001 From: Vitaly Mayatskikh Date: Mon, 4 May 2009 15:48:45 +0200 Subject: Avoid world-writable sysfs files in libata driver. Signed-off-by: Vitaly Mayatskikh Signed-off-by: Jeff Garzik --- drivers/ata/libata-scsi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 2733b0c90b75..68d9132d8f6f 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -313,7 +313,7 @@ ata_scsi_em_message_show(struct device *dev, struct device_attribute *attr, return ap->ops->em_show(ap, buf); return -EINVAL; } -DEVICE_ATTR(em_message, S_IRUGO | S_IWUGO, +DEVICE_ATTR(em_message, S_IRUGO | S_IWUSR, ata_scsi_em_message_show, ata_scsi_em_message_store); EXPORT_SYMBOL_GPL(dev_attr_em_message); @@ -366,7 +366,7 @@ ata_scsi_activity_store(struct device *dev, struct device_attribute *attr, } return -EINVAL; } -DEVICE_ATTR(sw_activity, S_IWUGO | S_IRUGO, ata_scsi_activity_show, +DEVICE_ATTR(sw_activity, S_IWUSR | S_IRUGO, ata_scsi_activity_show, ata_scsi_activity_store); EXPORT_SYMBOL_GPL(dev_attr_sw_activity); -- cgit v1.2.3 From c611bed780a51222ece8eaf303c779ef82d9d253 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 6 May 2009 17:08:44 +0100 Subject: ata_piix: ICH7 does not support correct MWDMA timings See Errata documentation. The recommended workaround is to use PIO4 instead which will we automatically do by flagging this mode not available. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 942d14ac8792..2b5700a832a2 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -72,6 +72,7 @@ * ICH2 spec c #20 - IDE PRD must not cross a 64K boundary * and must be dword aligned * ICH2 spec c #24 - UDMA mode 4,5 t85/86 should be 6ns not 3.3 + * ICH7 errata #16 - MWDMA1 timings are incorrect * * Should have been BIOS fixed: * 450NX: errata #19 - DMA hangs on old 450NX @@ -94,7 +95,7 @@ #include #define DRV_NAME "ata_piix" -#define DRV_VERSION "2.12" +#define DRV_VERSION "2.13" enum { PIIX_IOCFG = 0x54, /* IDE I/O configuration register */ @@ -136,6 +137,7 @@ enum piix_controller_ids { ich_pata_33, /* ICH up to UDMA 33 only */ ich_pata_66, /* ICH up to 66 Mhz */ ich_pata_100, /* ICH up to UDMA 100 */ + ich_pata_100_nomwdma1, /* ICH up to UDMA 100 but with no MWDMA1*/ ich5_sata, ich6_sata, ich6m_sata, @@ -216,8 +218,8 @@ static const struct pci_device_id piix_pci_tbl[] = { /* ICH6 (and 6) (i915) UDMA 100 */ { 0x8086, 0x266F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, /* ICH7/7-R (i945, i975) UDMA 100*/ - { 0x8086, 0x27DF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, - { 0x8086, 0x269E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, + { 0x8086, 0x27DF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100_nomwdma1 }, + { 0x8086, 0x269E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100_nomwdma1 }, /* ICH8 Mobile PATA Controller */ { 0x8086, 0x2850, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, @@ -487,6 +489,15 @@ static struct ata_port_info piix_port_info[] = { .port_ops = &ich_pata_ops, }, + [ich_pata_100_nomwdma1] = + { + .flags = PIIX_PATA_FLAGS | PIIX_FLAG_CHECKINTR, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2_ONLY, + .udma_mask = ATA_UDMA5, + .port_ops = &ich_pata_ops, + }, + [ich5_sata] = { .flags = PIIX_SATA_FLAGS, -- cgit v1.2.3 From 124a6eece386226191ec79e279a5471bd2614f81 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 6 May 2009 17:09:41 +0100 Subject: ata_piix: The Sony TZ90 needs the cable type hardcoding The Sony TZ90 needs the cable type hardcoding. See bug #12734 Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 2b5700a832a2..d51a17c0f59b 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -605,6 +605,7 @@ static const struct ich_laptop ich_laptop[] = { { 0x24CA, 0x1025, 0x003d }, /* ICH4 on ACER TM290 */ { 0x266F, 0x1025, 0x0066 }, /* ICH6 on ACER Aspire 1694WLMi */ { 0x2653, 0x1043, 0x82D8 }, /* ICH6M on Asus Eee 701 */ + { 0x27df, 0x104d, 0x900e }, /* ICH7 on Sony TZ-90 */ /* end marker */ { 0, } }; -- cgit v1.2.3 From aedec9226809ae9d1972f8f8079fc70206ee7a88 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 4 May 2009 11:18:57 -0400 Subject: airo: airo_get_encode{,ext} potential buffer overflow Feeding the return code of get_wep_key directly to the length parameter of memcpy is a bad idea since it could be -1... Reported-by: Eugene Teo Signed-off-by: John W. Linville --- drivers/net/wireless/airo.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index c36d3a3d655f..d73475739127 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -6501,7 +6501,10 @@ static int airo_get_encode(struct net_device *dev, /* Copy the key to the user buffer */ dwrq->length = get_wep_key(local, index, &buf[0], sizeof(buf)); - memcpy(extra, buf, dwrq->length); + if (dwrq->length != -1) + memcpy(extra, buf, dwrq->length); + else + dwrq->length = 0; return 0; } @@ -6659,7 +6662,10 @@ static int airo_get_encodeext(struct net_device *dev, /* Copy the key to the user buffer */ ext->key_len = get_wep_key(local, idx, &buf[0], sizeof(buf)); - memcpy(extra, buf, ext->key_len); + if (ext->key_len != -1) + memcpy(extra, buf, ext->key_len); + else + ext->key_len = 0; return 0; } -- cgit v1.2.3 From 9be6f0d40d9191e6fe7e45551c7d1c1614472b53 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Wed, 6 May 2009 13:57:27 -0400 Subject: rtl8187: use DMA-aware buffers with usb_control_msg Signed-off-by: John W. Linville --- drivers/net/wireless/rtl818x/rtl8187.h | 57 +++++++++++++++++++------- drivers/net/wireless/rtl818x/rtl8187_dev.c | 13 +++++- drivers/net/wireless/rtl818x/rtl8187_rtl8225.c | 8 +++- 3 files changed, 62 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rtl818x/rtl8187.h b/drivers/net/wireless/rtl818x/rtl8187.h index 9718f61809cf..edeff82a4d06 100644 --- a/drivers/net/wireless/rtl818x/rtl8187.h +++ b/drivers/net/wireless/rtl818x/rtl8187.h @@ -120,6 +120,12 @@ struct rtl8187_priv { __le64 buf; struct sk_buff_head queue; } b_tx_status; /* This queue is used by both -b and non-b devices */ + struct mutex io_mutex; + union { + u8 bits8; + __le16 bits16; + __le32 bits32; + } *io_dmabuf; }; void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data); @@ -129,10 +135,14 @@ static inline u8 rtl818x_ioread8_idx(struct rtl8187_priv *priv, { u8 val; + mutex_lock(&priv->io_mutex); usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0), RTL8187_REQ_GET_REG, RTL8187_REQT_READ, - (unsigned long)addr, idx & 0x03, &val, - sizeof(val), HZ / 2); + (unsigned long)addr, idx & 0x03, + &priv->io_dmabuf->bits8, sizeof(val), HZ / 2); + + val = priv->io_dmabuf->bits8; + mutex_unlock(&priv->io_mutex); return val; } @@ -147,10 +157,14 @@ static inline u16 rtl818x_ioread16_idx(struct rtl8187_priv *priv, { __le16 val; + mutex_lock(&priv->io_mutex); usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0), RTL8187_REQ_GET_REG, RTL8187_REQT_READ, - (unsigned long)addr, idx & 0x03, &val, - sizeof(val), HZ / 2); + (unsigned long)addr, idx & 0x03, + &priv->io_dmabuf->bits16, sizeof(val), HZ / 2); + + val = priv->io_dmabuf->bits16; + mutex_unlock(&priv->io_mutex); return le16_to_cpu(val); } @@ -165,10 +179,14 @@ static inline u32 rtl818x_ioread32_idx(struct rtl8187_priv *priv, { __le32 val; + mutex_lock(&priv->io_mutex); usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0), RTL8187_REQ_GET_REG, RTL8187_REQT_READ, - (unsigned long)addr, idx & 0x03, &val, - sizeof(val), HZ / 2); + (unsigned long)addr, idx & 0x03, + &priv->io_dmabuf->bits32, sizeof(val), HZ / 2); + + val = priv->io_dmabuf->bits32; + mutex_unlock(&priv->io_mutex); return le32_to_cpu(val); } @@ -181,10 +199,15 @@ static inline u32 rtl818x_ioread32(struct rtl8187_priv *priv, __le32 *addr) static inline void rtl818x_iowrite8_idx(struct rtl8187_priv *priv, u8 *addr, u8 val, u8 idx) { + mutex_lock(&priv->io_mutex); + + priv->io_dmabuf->bits8 = val; usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0), RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE, - (unsigned long)addr, idx & 0x03, &val, - sizeof(val), HZ / 2); + (unsigned long)addr, idx & 0x03, + &priv->io_dmabuf->bits8, sizeof(val), HZ / 2); + + mutex_unlock(&priv->io_mutex); } static inline void rtl818x_iowrite8(struct rtl8187_priv *priv, u8 *addr, u8 val) @@ -195,12 +218,15 @@ static inline void rtl818x_iowrite8(struct rtl8187_priv *priv, u8 *addr, u8 val) static inline void rtl818x_iowrite16_idx(struct rtl8187_priv *priv, __le16 *addr, u16 val, u8 idx) { - __le16 buf = cpu_to_le16(val); + mutex_lock(&priv->io_mutex); + priv->io_dmabuf->bits16 = cpu_to_le16(val); usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0), RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE, - (unsigned long)addr, idx & 0x03, &buf, sizeof(buf), - HZ / 2); + (unsigned long)addr, idx & 0x03, + &priv->io_dmabuf->bits16, sizeof(val), HZ / 2); + + mutex_unlock(&priv->io_mutex); } static inline void rtl818x_iowrite16(struct rtl8187_priv *priv, __le16 *addr, @@ -212,12 +238,15 @@ static inline void rtl818x_iowrite16(struct rtl8187_priv *priv, __le16 *addr, static inline void rtl818x_iowrite32_idx(struct rtl8187_priv *priv, __le32 *addr, u32 val, u8 idx) { - __le32 buf = cpu_to_le32(val); + mutex_lock(&priv->io_mutex); + priv->io_dmabuf->bits32 = cpu_to_le32(val); usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0), RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE, - (unsigned long)addr, idx & 0x03, &buf, sizeof(buf), - HZ / 2); + (unsigned long)addr, idx & 0x03, + &priv->io_dmabuf->bits32, sizeof(val), HZ / 2); + + mutex_unlock(&priv->io_mutex); } static inline void rtl818x_iowrite32(struct rtl8187_priv *priv, __le32 *addr, diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c index fd81884b9c7d..bac6cfba6abd 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_dev.c +++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c @@ -1329,6 +1329,14 @@ static int __devinit rtl8187_probe(struct usb_interface *intf, priv = dev->priv; priv->is_rtl8187b = (id->driver_info == DEVICE_RTL8187B); + /* allocate "DMA aware" buffer for register accesses */ + priv->io_dmabuf = kmalloc(sizeof(*priv->io_dmabuf), GFP_KERNEL); + if (!priv->io_dmabuf) { + err = -ENOMEM; + goto err_free_dev; + } + mutex_init(&priv->io_mutex); + SET_IEEE80211_DEV(dev, &intf->dev); usb_set_intfdata(intf, dev); priv->udev = udev; @@ -1495,7 +1503,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf, err = ieee80211_register_hw(dev); if (err) { printk(KERN_ERR "rtl8187: Cannot register device\n"); - goto err_free_dev; + goto err_free_dmabuf; } mutex_init(&priv->conf_mutex); skb_queue_head_init(&priv->b_tx_status.queue); @@ -1506,6 +1514,8 @@ static int __devinit rtl8187_probe(struct usb_interface *intf, return 0; + err_free_dmabuf: + kfree(priv->io_dmabuf); err_free_dev: ieee80211_free_hw(dev); usb_set_intfdata(intf, NULL); @@ -1526,6 +1536,7 @@ static void __devexit rtl8187_disconnect(struct usb_interface *intf) priv = dev->priv; usb_reset_device(priv->udev); usb_put_dev(interface_to_usbdev(intf)); + kfree(priv->io_dmabuf); ieee80211_free_hw(dev); } diff --git a/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c b/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c index 78df281b297a..a09819386a1e 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c +++ b/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c @@ -88,9 +88,15 @@ static void rtl8225_write_8051(struct ieee80211_hw *dev, u8 addr, __le16 data) rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80); udelay(10); + mutex_lock(&priv->io_mutex); + + priv->io_dmabuf->bits16 = data; usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0), RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE, - addr, 0x8225, &data, sizeof(data), HZ / 2); + addr, 0x8225, &priv->io_dmabuf->bits16, sizeof(data), + HZ / 2); + + mutex_unlock(&priv->io_mutex); rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2)); udelay(10); -- cgit v1.2.3 From 209d889bab3d0812ee9cda4f6bbeb1af8bede9d4 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Thu, 7 May 2009 08:09:08 -0400 Subject: ath5k: update channel in sw state after stopping RX and TX This fixes a non-theoretical race condition when transmitting and receiving frames during a scan. If the channel or operating band changes while processing status descriptors in the tasklets, ath5k will incorrectly use the new channel and band when reporting the rates, even if the frame was actually sent on a previous channel. Typically this will manifest as a beacon found on an incorrect frequency and/or a warning in the driver while scanning: [ 4773.891944] cfg80211: Found new beacon on frequency: 5805 MHz (Ch 161) on phy0 [ 4785.461125] ------------[ cut here ]------------ [ 4785.461135] WARNING: at drivers/net/wireless/ath/ath5k/base.c:1141 ath5k_tasklet_rx+0x2ff/0x577 [ath5k]() [ 4785.461143] Hardware name: MacBook1,1 [ 4785.461148] invalid hw_rix: 1b [ 4785.461152] Modules linked in: fuse i915 drm af_packet acpi_cpufreq binfmt_misc dm_mirror dm_region_hash dm_log dm_multipath dm_mod arc4 ecb snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_seq_dummy snd_seq_oss snd_seq_midi_event ath5k snd_seq hid_apple usbhid snd_seq_device mac80211 appletouch snd_pcm_oss sky2 ohci1394 snd_mixer_oss ath ieee1394 snd_pcm bitrev snd_timer cfg80211 crc32 snd snd_page_alloc button processor ac ehci_hcd joydev uhci_hcd sg battery thermal sr_mod cdrom applesmc evdev input_polldev unix [last unloaded: microcode] [ 4785.461296] Pid: 0, comm: swapper Tainted: G W 2.6.30-rc3-wl #112 [ 4785.461302] Call Trace: [ 4785.461316] [] warn_slowpath+0x76/0xa5 [ 4785.461331] [] ? debug_dma_unmap_page+0x5a/0x62 [ 4785.461357] [] ath5k_tasklet_rx+0x2ff/0x577 [ath5k] [ 4785.461371] [] ? trace_hardirqs_off+0xb/0xd [ 4785.461381] [] ? __tasklet_schedule+0x6e/0x7c [ 4785.461392] [] tasklet_action+0x92/0xe5 [ 4785.461402] [] __do_softirq+0xb1/0x182 [ 4785.461411] [] do_softirq+0x30/0x48 [ 4785.461428] [] irq_exit+0x3d/0x74 [ 4785.461435] [] do_IRQ+0x76/0x8c [ 4785.461440] [] common_interrupt+0x2e/0x34 [ 4785.461445] [] ? timer_list_show+0x1ab/0x939 [ 4785.461457] [] ? acpi_idle_enter_bm+0x27c/0x2b9 [processor] [ 4785.461463] [] cpuidle_idle_call+0x6a/0x9c [ 4785.461468] [] cpu_idle+0x53/0x87 [ 4785.461473] [] rest_init+0x6c/0x6e [ 4785.461479] [] start_kernel+0x286/0x28b [ 4785.461484] [] __init_begin+0x37/0x3c [ 4785.461487] ---[ end trace aaf8496ba3679dfb ]--- Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/base.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index a08bc8a4fb69..32df27a9c7a2 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -214,7 +214,7 @@ static struct pci_driver ath5k_pci_driver = { * Prototypes - MAC 802.11 stack related functions */ static int ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb); -static int ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel); +static int ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan); static int ath5k_reset_wake(struct ath5k_softc *sc); static int ath5k_start(struct ieee80211_hw *hw); static void ath5k_stop(struct ieee80211_hw *hw); @@ -1038,16 +1038,13 @@ ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan) if (chan->center_freq != sc->curchan->center_freq || chan->hw_value != sc->curchan->hw_value) { - sc->curchan = chan; - sc->curband = &sc->sbands[chan->band]; - /* * To switch channels clear any pending DMA operations; * wait long enough for the RX fifo to drain, reset the * hardware at the new frequency, and then re-enable * the relevant bits of the h/w. */ - return ath5k_reset(sc, true, true); + return ath5k_reset(sc, chan); } return 0; @@ -2314,7 +2311,7 @@ ath5k_init(struct ath5k_softc *sc) sc->imask = AR5K_INT_RXOK | AR5K_INT_RXERR | AR5K_INT_RXEOL | AR5K_INT_RXORN | AR5K_INT_TXDESC | AR5K_INT_TXEOL | AR5K_INT_FATAL | AR5K_INT_GLOBAL; - ret = ath5k_reset(sc, false, false); + ret = ath5k_reset(sc, NULL); if (ret) goto done; @@ -2599,18 +2596,25 @@ drop_packet: return NETDEV_TX_OK; } +/* + * Reset the hardware. If chan is not NULL, then also pause rx/tx + * and change to the given channel. + */ static int -ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel) +ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan) { struct ath5k_hw *ah = sc->ah; int ret; ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n"); - if (stop) { + if (chan) { ath5k_hw_set_imr(ah, 0); ath5k_txq_cleanup(sc); ath5k_rx_stop(sc); + + sc->curchan = chan; + sc->curband = &sc->sbands[chan->band]; } ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, true); if (ret) { @@ -2648,7 +2652,7 @@ ath5k_reset_wake(struct ath5k_softc *sc) { int ret; - ret = ath5k_reset(sc, true, true); + ret = ath5k_reset(sc, sc->curchan); if (!ret) ieee80211_wake_queues(sc->hw); -- cgit v1.2.3 From 542cc7937e6af73cb2edc455a0e456d22e254abb Mon Sep 17 00:00:00 2001 From: Jay Sternberg Date: Fri, 8 May 2009 13:44:46 -0700 Subject: iwlwifi: fix device id registration for 6000 series 2x2 devices Add device ids for 2x2 devices. Also fix antenna usage because these devices use antennas A and B, not B and C. Signed-off-by: Jay Sternberg Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-6000.c | 8 ++++---- drivers/net/wireless/iwlwifi/iwl-agn.c | 2 ++ 2 files changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index edfa5e149f71..bd438d8acf55 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -101,8 +101,8 @@ struct iwl_cfg iwl6000_2agn_cfg = { .eeprom_ver = EEPROM_5000_EEPROM_VERSION, .eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION, .mod_params = &iwl50_mod_params, - .valid_tx_ant = ANT_BC, - .valid_rx_ant = ANT_BC, + .valid_tx_ant = ANT_AB, + .valid_rx_ant = ANT_AB, .need_pll_cfg = false, }; @@ -117,8 +117,8 @@ struct iwl_cfg iwl6050_2agn_cfg = { .eeprom_ver = EEPROM_5000_EEPROM_VERSION, .eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION, .mod_params = &iwl50_mod_params, - .valid_tx_ant = ANT_BC, - .valid_rx_ant = ANT_BC, + .valid_tx_ant = ANT_AB, + .valid_rx_ant = ANT_AB, .need_pll_cfg = false, }; diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 1ef4192207a5..3bb28db4a40f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -3636,7 +3636,9 @@ static struct pci_device_id iwl_hw_card_ids[] = { {IWL_PCI_DEVICE(0x0085, 0x1112, iwl6000_2ag_cfg)}, {IWL_PCI_DEVICE(0x0082, 0x1122, iwl6000_2ag_cfg)}, {IWL_PCI_DEVICE(0x422B, PCI_ANY_ID, iwl6000_3agn_cfg)}, + {IWL_PCI_DEVICE(0x422C, PCI_ANY_ID, iwl6000_2agn_cfg)}, {IWL_PCI_DEVICE(0x4238, PCI_ANY_ID, iwl6000_3agn_cfg)}, + {IWL_PCI_DEVICE(0x4239, PCI_ANY_ID, iwl6000_2agn_cfg)}, {IWL_PCI_DEVICE(0x0082, PCI_ANY_ID, iwl6000_2agn_cfg)}, {IWL_PCI_DEVICE(0x0085, PCI_ANY_ID, iwl6000_3agn_cfg)}, {IWL_PCI_DEVICE(0x0086, PCI_ANY_ID, iwl6050_3agn_cfg)}, -- cgit v1.2.3 From 9166d0f620d5dd4a128711bdeedb3e0f534d9d49 Mon Sep 17 00:00:00 2001 From: Adrian Batzill Date: Mon, 11 May 2009 15:22:16 -0700 Subject: Input: atkbd - add force release keys quirk for Amilo Xi 3650 Signed-off-by: Adrian Batzill Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/atkbd.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'drivers') diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index 444dec07e5d8..df3f8aa68115 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -894,6 +894,13 @@ static unsigned int atkbd_amilo_pa1510_forced_release_keys[] = { 0xb0, 0xae, -1U }; +/* + * Amilo Xi 3650 key release for light touch bar not working + */ +static unsigned int atkbd_amilo_xi3650_forced_release_keys[] = { + 0x67, 0xed, 0x90, 0xa2, 0x99, 0xa4, 0xae, 0xb0, -1U +}; + /* * atkbd_set_keycode_table() initializes keyboard's keycode table * according to the selected scancode set @@ -1560,6 +1567,15 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { .callback = atkbd_setup_forced_release, .driver_data = atkbd_amilo_pa1510_forced_release_keys, }, + { + .ident = "Fujitsu Amilo Xi 3650", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 3650"), + }, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_amilo_xi3650_forced_release_keys, + }, { } }; -- cgit v1.2.3 From 705a76d2d22a2824f45f07d023a380293554e989 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Mon, 11 May 2009 08:36:39 -0700 Subject: Input: tsc2007 - fix locking in hrtimer handler Now that hrtimers are always running in hard irq context we can't unconditionally enable interrupts at the end of the timer function. Signed-off-by: Thierry Reding Signed-off-by: Kwangwoo Lee Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/tsc2007.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c index 536668fbda22..948e167557f1 100644 --- a/drivers/input/touchscreen/tsc2007.c +++ b/drivers/input/touchscreen/tsc2007.c @@ -200,8 +200,9 @@ static int tsc2007_read_values(struct tsc2007 *tsc) static enum hrtimer_restart tsc2007_timer(struct hrtimer *handle) { struct tsc2007 *ts = container_of(handle, struct tsc2007, timer); + unsigned long flags; - spin_lock_irq(&ts->lock); + spin_lock_irqsave(&ts->lock, flags); if (unlikely(!ts->get_pendown_state() && ts->pendown)) { struct input_dev *input = ts->input; @@ -222,7 +223,7 @@ static enum hrtimer_restart tsc2007_timer(struct hrtimer *handle) tsc2007_send_event(ts); } - spin_unlock_irq(&ts->lock); + spin_unlock_irqrestore(&ts->lock, flags); return HRTIMER_NORESTART; } -- cgit v1.2.3 From 1904b03430ade1cd621bb8b6ca8e38819a2f9267 Mon Sep 17 00:00:00 2001 From: Wolfgang Grandegger Date: Thu, 9 Apr 2009 11:59:52 +0200 Subject: i2c-mpc: bug fix for MPC52xx clock setting and printout The clock setting did not work for the MPC52xx due to a stupid bug. Furthermore, the dev info output "clock=0" for old device trees was misleading. This patch fixes both issues. Signed-off-by: Wolfgang Grandegger Acked-by: Grant Likely Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-mpc.c | 34 ++++++++++++++++++++-------------- 1 file changed, 20 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index 4af5c09f0e8f..dd778d7ae047 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -164,7 +164,7 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing) return 0; } -#ifdef CONFIG_PPC_52xx +#ifdef CONFIG_PPC_MPC52xx static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = { {20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23}, {28, 0x24}, {30, 0x01}, {32, 0x25}, {34, 0x02}, @@ -188,7 +188,7 @@ static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = { int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock, int prescaler) { - const struct mpc52xx_i2c_divider *div = NULL; + const struct mpc_i2c_divider *div = NULL; unsigned int pvr = mfspr(SPRN_PVR); u32 divider; int i; @@ -203,7 +203,7 @@ int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock, int prescaler) * We want to choose an FDR/DFSR that generates an I2C bus speed that * is equal to or lower than the requested speed. */ - for (i = 0; i < ARRAY_SIZE(mpc52xx_i2c_dividers); i++) { + for (i = 0; i < ARRAY_SIZE(mpc_i2c_dividers_52xx); i++) { div = &mpc_i2c_dividers_52xx[i]; /* Old MPC5200 rev A CPUs do not support the high bits */ if (div->fdr & 0xc0 && pvr == 0x80822011) @@ -219,20 +219,23 @@ static void mpc_i2c_setclock_52xx(struct device_node *node, struct mpc_i2c *i2c, u32 clock, u32 prescaler) { - int fdr = mpc52xx_i2c_get_fdr(node, clock, prescaler); + int ret, fdr; + + ret = mpc_i2c_get_fdr_52xx(node, clock, prescaler); + fdr = (ret >= 0) ? ret : 0x3f; /* backward compatibility */ - if (fdr < 0) - fdr = 0x3f; /* backward compatibility */ writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR); - dev_info(i2c->dev, "clock %d Hz (fdr=%d)\n", clock, fdr); + + if (ret >= 0) + dev_info(i2c->dev, "clock %d Hz (fdr=%d)\n", clock, fdr); } -#else /* !CONFIG_PPC_52xx */ +#else /* !CONFIG_PPC_MPC52xx */ static void mpc_i2c_setclock_52xx(struct device_node *node, struct mpc_i2c *i2c, u32 clock, u32 prescaler) { } -#endif /* CONFIG_PPC_52xx*/ +#endif /* CONFIG_PPC_MPC52xx*/ #ifdef CONFIG_FSL_SOC static const struct mpc_i2c_divider mpc_i2c_dividers_8xxx[] = { @@ -321,14 +324,17 @@ static void mpc_i2c_setclock_8xxx(struct device_node *node, struct mpc_i2c *i2c, u32 clock, u32 prescaler) { - int fdr = mpc_i2c_get_fdr_8xxx(node, clock, prescaler); + int ret, fdr; + + ret = mpc_i2c_get_fdr_8xxx(node, clock, prescaler); + fdr = (ret >= 0) ? ret : 0x1031; /* backward compatibility */ - if (fdr < 0) - fdr = 0x1031; /* backward compatibility */ writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR); writeb((fdr >> 8) & 0xff, i2c->base + MPC_I2C_DFSRR); - dev_info(i2c->dev, "clock %d Hz (dfsrr=%d fdr=%d)\n", - clock, fdr >> 8, fdr & 0xff); + + if (ret >= 0) + dev_info(i2c->dev, "clock %d Hz (dfsrr=%d fdr=%d)\n", + clock, fdr >> 8, fdr & 0xff); } #else /* !CONFIG_FSL_SOC */ -- cgit v1.2.3 From 89bc5d4a915dc6675961f797de91748bda87efcc Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 9 Apr 2009 17:03:24 +0100 Subject: i2c: Enable i2c-s3c2410 for S3C64XX too This controller is also present on the S3C64xx series processors so enable the driver in Kconfig for those platforms. Signed-off-by: Mark Brown Signed-off-by: Ben Dooks --- drivers/i2c/busses/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index a48c8aee0218..f1c6ca7e2852 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -467,7 +467,7 @@ config I2C_PXA_SLAVE config I2C_S3C2410 tristate "S3C2410 I2C Driver" - depends on ARCH_S3C2410 + depends on ARCH_S3C2410 || ARCH_S3C64XX help Say Y here to include support for I2C controller in the Samsung S3C2410 based System-on-Chip devices. -- cgit v1.2.3 From 36521c271e5f93b249329ee7f321d27825970e31 Mon Sep 17 00:00:00 2001 From: Mark Ware Date: Tue, 21 Apr 2009 22:49:02 +1000 Subject: i2c-cpm: Pass dev ptr to dma_*_coherent rather than NULL Recent DMA changes result in a BUG() when NULL is passed to dma_alloc_coherent in place of a device. Signed-off-by: Mark Ware [ben-linux@fluff.org: fix patch moves] Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-cpm.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c index 3fcf78e906db..b5db8b883615 100644 --- a/drivers/i2c/busses/i2c-cpm.c +++ b/drivers/i2c/busses/i2c-cpm.c @@ -531,16 +531,16 @@ static int __devinit cpm_i2c_setup(struct cpm_i2c *cpm) rbdf = cpm->rbase; for (i = 0; i < CPM_MAXBD; i++) { - cpm->rxbuf[i] = dma_alloc_coherent( - NULL, CPM_MAX_READ + 1, &cpm->rxdma[i], GFP_KERNEL); + cpm->rxbuf[i] = dma_alloc_coherent(&cpm->ofdev->dev, + CPM_MAX_READ + 1, + &cpm->rxdma[i], GFP_KERNEL); if (!cpm->rxbuf[i]) { ret = -ENOMEM; goto out_muram; } out_be32(&rbdf[i].cbd_bufaddr, ((cpm->rxdma[i] + 1) & ~1)); - cpm->txbuf[i] = (unsigned char *)dma_alloc_coherent( - NULL, CPM_MAX_READ + 1, &cpm->txdma[i], GFP_KERNEL); + cpm->txbuf[i] = (unsigned char *)dma_alloc_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1, &cpm->txdma[i], GFP_KERNEL); if (!cpm->txbuf[i]) { ret = -ENOMEM; goto out_muram; @@ -585,10 +585,10 @@ static int __devinit cpm_i2c_setup(struct cpm_i2c *cpm) out_muram: for (i = 0; i < CPM_MAXBD; i++) { if (cpm->rxbuf[i]) - dma_free_coherent(NULL, CPM_MAX_READ + 1, + dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1, cpm->rxbuf[i], cpm->rxdma[i]); if (cpm->txbuf[i]) - dma_free_coherent(NULL, CPM_MAX_READ + 1, + dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1, cpm->txbuf[i], cpm->txdma[i]); } cpm_muram_free(cpm->dp_addr); @@ -619,9 +619,9 @@ static void cpm_i2c_shutdown(struct cpm_i2c *cpm) /* Free all memory */ for (i = 0; i < CPM_MAXBD; i++) { - dma_free_coherent(NULL, CPM_MAX_READ + 1, + dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1, cpm->rxbuf[i], cpm->rxdma[i]); - dma_free_coherent(NULL, CPM_MAX_READ + 1, + dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1, cpm->txbuf[i], cpm->txdma[i]); } -- cgit v1.2.3 From 8d181018532dd709ec1f789e374cda92d7b01ce1 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 8 May 2009 07:13:33 -0600 Subject: PCI MSI: Fix MSI-X with NIU cards The NIU device refuses to allow accesses to MSI-X registers before MSI-X is enabled. This patch fixes the problem by moving the read of the mask register to after MSI-X is enabled. Reported-by: David S. Miller Tested-by: David S. Miller Reviewed-by: David S. Miller Signed-off-by: Matthew Wilcox Signed-off-by: Jesse Barnes --- drivers/pci/msi.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index 6f2e6295e773..362773247fbf 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -455,8 +455,6 @@ static int msix_capability_init(struct pci_dev *dev, entry->msi_attrib.default_irq = dev->irq; entry->msi_attrib.pos = pos; entry->mask_base = base; - entry->masked = readl(base + j * PCI_MSIX_ENTRY_SIZE + - PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET); msix_mask_irq(entry, 1); list_add_tail(&entry->list, &dev->msi_list); @@ -493,6 +491,12 @@ static int msix_capability_init(struct pci_dev *dev, msix_set_enable(dev, 1); dev->msix_enabled = 1; + list_for_each_entry(entry, &dev->msi_list, list) { + int vector = entry->msi_attrib.entry_nr; + entry->masked = readl(base + vector * PCI_MSIX_ENTRY_SIZE + + PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET); + } + return 0; } -- cgit v1.2.3 From 34fd5dad46fc494c6ed3b174b2c991ea9961ebe9 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 12 May 2009 11:33:39 +0100 Subject: Remove unreached code in drivers/net/mlx4/en_rx.c Remove the return after the goto. We want the goto because it frees memory as well as returning err. Found by smatch (http://repo.or.cz/w/smatch.git). Signed-off-by: Dan Carpenter Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/net/mlx4/en_rx.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/mlx4/en_rx.c b/drivers/net/mlx4/en_rx.c index 7942c4d3cd88..9ee873e872b3 100644 --- a/drivers/net/mlx4/en_rx.c +++ b/drivers/net/mlx4/en_rx.c @@ -951,7 +951,6 @@ static int mlx4_en_config_rss_qp(struct mlx4_en_priv *priv, if (err) { mlx4_err(mdev, "Failed to allocate qp #%d\n", qpn); goto out; - return err; } qp->event = mlx4_en_sqp_event; -- cgit v1.2.3 From f29ce72795bf335553ab972606bc576b5473995e Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Tue, 12 May 2009 09:08:31 -0700 Subject: drm/i915: automatically select FRAMEBUFFER_CONSOLE if !EMBEDDED People keep getting bitten by this, so just auto-select it by default, assuming most configurations will actually want a console. Signed-off-by: Jesse Barnes --- drivers/gpu/drm/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 3a22eb9be378..17b24c580c09 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -71,6 +71,7 @@ config DRM_I915 select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select FB + select FRAMEBUFFER_CONSOLE if !EMBEDDED tristate "i915 driver" help Choose this option if you have a system that has Intel 830M, 845G, -- cgit v1.2.3 From 7348d82a67b3fe0363e7f0679b50ecbdc65116c7 Mon Sep 17 00:00:00 2001 From: Daniel Ribeiro Date: Tue, 12 May 2009 13:19:36 -0700 Subject: pxa2xx_spi: prevent panic case setup() fails setup() may fail before ctldata is set, causing a kernel panic on cleanup(). Signed-off-by: Daniel Ribeiro Signed-off-by: David Brownell Cc: Eric Miao Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/pxa2xx_spi.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c index 885194a07418..3f3c08c6ba4e 100644 --- a/drivers/spi/pxa2xx_spi.c +++ b/drivers/spi/pxa2xx_spi.c @@ -1373,6 +1373,9 @@ static void cleanup(struct spi_device *spi) { struct chip_data *chip = spi_get_ctldata(spi); + if (!chip) + return; + if (gpio_is_valid(chip->gpio_cs)) gpio_free(chip->gpio_cs); -- cgit v1.2.3 From f993004d73f266a02f3ac736fafb033c600972d9 Mon Sep 17 00:00:00 2001 From: Kim Kyuwon Date: Tue, 12 May 2009 13:19:38 -0700 Subject: rtc: rtc-twl4030 don't mask alarm interrupts on suspend This patch enables the alarm interrupt of TWL4030 RTC to wake up the system from suspend. You can test this patch with following command. # echo +10 > /sys/class/rtc/rtc0/wakealarm; echo mem > /sys/power/state; Signed-off-by: Kim Kyuwon Acked-by: David Brownell Cc: Kyungmin Park Cc: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-twl4030.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/rtc/rtc-twl4030.c b/drivers/rtc/rtc-twl4030.c index a6341e4f9a0f..9c8c70c497dc 100644 --- a/drivers/rtc/rtc-twl4030.c +++ b/drivers/rtc/rtc-twl4030.c @@ -495,9 +495,7 @@ static int twl4030_rtc_suspend(struct platform_device *pdev, pm_message_t state) { irqstat = rtc_irq_bits; - /* REVISIT alarm may need to wake us from sleep */ - mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M | - BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); + mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M); return 0; } -- cgit v1.2.3 From ee83126bb17f6216e8815a4146e80032b4d80ba4 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 12 May 2009 13:19:41 -0700 Subject: fbdev: remove outdated advice about I2C configuration The required I2C modules are now selected automatically by the means of select statements in Kconfig, so there is no point in confusing the users with options he/she would be supposed to enable manually. Signed-off-by: Jean Delvare Cc: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/Kconfig | 23 ++++------------------- 1 file changed, 4 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 7826bdce4bbe..0048f1185a60 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -1128,13 +1128,6 @@ config FB_INTEL 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets. Say Y if you have and plan to use such a board. - If you say Y here and want DDC/I2C support you must first say Y to - "I2C support" and "I2C bit-banging support" in the character devices - section. - - If you say M here then "I2C support" and "I2C bit-banging support" - can be build either as modules or built-in. - To compile this driver as a module, choose M here: the module will be called intelfb. @@ -1207,11 +1200,10 @@ config FB_MATROX_G pixel and 32 bpp packed pixel. You can also use font widths different from 8. - If you need support for G400 secondary head, you must first say Y to - "I2C support" in the character devices section, and then to - "Matrox I2C support" and "G400 second head support" here in the - framebuffer section. G450/G550 secondary head and digital output - are supported without additional modules. + If you need support for G400 secondary head, you must say Y to + "Matrox I2C support" and "G400 second head support" right below. + G450/G550 secondary head and digital output are supported without + additional modules. The driver starts in monitor mode. You must use the matroxset tool (available at ) to @@ -1310,13 +1302,6 @@ config FB_RADEON a framebuffer device. There are both PCI and AGP versions. You don't need to choose this to run the Radeon in plain VGA mode. - If you say Y here and want DDC/I2C support you must first say Y to - "I2C support" and "I2C bit-banging support" in the character devices - section. - - If you say M here then "I2C support" and "I2C bit-banging support" - can be build either as modules or built-in. - There is a product page at http://apps.ati.com/ATIcompare/ -- cgit v1.2.3 From ee1ef82c7e6d073f881952348960bbc639687482 Mon Sep 17 00:00:00 2001 From: Harald Welte Date: Tue, 12 May 2009 13:19:42 -0700 Subject: viafb: make it work on x86_64 Fix a bug in viafb on x86_64 builds (e.g. for VIA Nano CPU). You cannot make the assumption that sizeof(unsigned int) == sizeof(unsigned long), so the parsing of the default mode (640x480) fails, leading to a division by zero during insmod of the driver. Signed-off-by: Harald Welte Cc: Cc: Cc: Acked-by: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/via/viafbdev.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c index e327b84820d2..a0fec298216e 100644 --- a/drivers/video/via/viafbdev.c +++ b/drivers/video/via/viafbdev.c @@ -2103,7 +2103,7 @@ static void viafb_remove_proc(struct proc_dir_entry *viafb_entry) static int __devinit via_pci_probe(void) { - unsigned int default_xres, default_yres; + unsigned long default_xres, default_yres; char *tmpc, *tmpm; char *tmpc_sec, *tmpm_sec; int vmode_index; @@ -2196,8 +2196,8 @@ static int __devinit via_pci_probe(void) viafb_FB_MM = viaparinfo->fbmem_virt; tmpm = viafb_mode; tmpc = strsep(&tmpm, "x"); - strict_strtoul(tmpc, 0, (unsigned long *)&default_xres); - strict_strtoul(tmpm, 0, (unsigned long *)&default_yres); + strict_strtoul(tmpc, 0, &default_xres); + strict_strtoul(tmpm, 0, &default_yres); vmode_index = viafb_get_mode_index(default_xres, default_yres, 0); DEBUG_MSG(KERN_INFO "0->index=%d\n", vmode_index); -- cgit v1.2.3 From 4f005dbe5584fe54c9f6d6d4f0acd3fb29be84da Mon Sep 17 00:00:00 2001 From: Maciej Sosnowski Date: Thu, 23 Apr 2009 12:31:51 +0200 Subject: ioatdma: fix "ioatdma frees DMA memory with wrong function" as reported by Alexander Beregalov ioatdma 0000:00:08.0: DMA-API: device driver frees DMA memory with wrong function [device address=0x000000007f76f800] [size=2000 bytes] [map ped as single] [unmapped as page] The ioatdma driver was unmapping all regions (either allocated as page or single) using unmap_page. This patch lets dma driver recognize if unmap_single or unmap_page should be used. It introduces two new dma control flags: DMA_COMPL_SRC_UNMAP_SINGLE and DMA_COMPL_DEST_UNMAP_SINGLE. They should be set to indicate dma driver to do dma-unmapping as single (first one for the source, tha latter for the destination). If respective flag is not set, the driver assumes dma-unmapping as page. Signed-off-by: Maciej Sosnowski Reported-by: Alexander Beregalov Tested-by: Alexander Beregalov Signed-off-by: Dan Williams --- drivers/dma/dmaengine.c | 17 +++++++++++------ drivers/dma/ioat_dma.c | 45 ++++++++++++++++++++++++++++----------------- 2 files changed, 39 insertions(+), 23 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index 92438e9dacc3..5a87384ea4ff 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -804,11 +804,14 @@ dma_async_memcpy_buf_to_buf(struct dma_chan *chan, void *dest, dma_addr_t dma_dest, dma_src; dma_cookie_t cookie; int cpu; + unsigned long flags; dma_src = dma_map_single(dev->dev, src, len, DMA_TO_DEVICE); dma_dest = dma_map_single(dev->dev, dest, len, DMA_FROM_DEVICE); - tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len, - DMA_CTRL_ACK); + flags = DMA_CTRL_ACK | + DMA_COMPL_SRC_UNMAP_SINGLE | + DMA_COMPL_DEST_UNMAP_SINGLE; + tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len, flags); if (!tx) { dma_unmap_single(dev->dev, dma_src, len, DMA_TO_DEVICE); @@ -850,11 +853,12 @@ dma_async_memcpy_buf_to_pg(struct dma_chan *chan, struct page *page, dma_addr_t dma_dest, dma_src; dma_cookie_t cookie; int cpu; + unsigned long flags; dma_src = dma_map_single(dev->dev, kdata, len, DMA_TO_DEVICE); dma_dest = dma_map_page(dev->dev, page, offset, len, DMA_FROM_DEVICE); - tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len, - DMA_CTRL_ACK); + flags = DMA_CTRL_ACK | DMA_COMPL_SRC_UNMAP_SINGLE; + tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len, flags); if (!tx) { dma_unmap_single(dev->dev, dma_src, len, DMA_TO_DEVICE); @@ -898,12 +902,13 @@ dma_async_memcpy_pg_to_pg(struct dma_chan *chan, struct page *dest_pg, dma_addr_t dma_dest, dma_src; dma_cookie_t cookie; int cpu; + unsigned long flags; dma_src = dma_map_page(dev->dev, src_pg, src_off, len, DMA_TO_DEVICE); dma_dest = dma_map_page(dev->dev, dest_pg, dest_off, len, DMA_FROM_DEVICE); - tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len, - DMA_CTRL_ACK); + flags = DMA_CTRL_ACK; + tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len, flags); if (!tx) { dma_unmap_page(dev->dev, dma_src, len, DMA_TO_DEVICE); diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c index e4fc33c1c32f..1955ee8d6d20 100644 --- a/drivers/dma/ioat_dma.c +++ b/drivers/dma/ioat_dma.c @@ -1063,22 +1063,31 @@ static void ioat_dma_cleanup_tasklet(unsigned long data) static void ioat_dma_unmap(struct ioat_dma_chan *ioat_chan, struct ioat_desc_sw *desc) { - /* - * yes we are unmapping both _page and _single - * alloc'd regions with unmap_page. Is this - * *really* that bad? - */ - if (!(desc->async_tx.flags & DMA_COMPL_SKIP_DEST_UNMAP)) - pci_unmap_page(ioat_chan->device->pdev, - pci_unmap_addr(desc, dst), - pci_unmap_len(desc, len), - PCI_DMA_FROMDEVICE); - - if (!(desc->async_tx.flags & DMA_COMPL_SKIP_SRC_UNMAP)) - pci_unmap_page(ioat_chan->device->pdev, - pci_unmap_addr(desc, src), - pci_unmap_len(desc, len), - PCI_DMA_TODEVICE); + if (!(desc->async_tx.flags & DMA_COMPL_SKIP_DEST_UNMAP)) { + if (desc->async_tx.flags & DMA_COMPL_DEST_UNMAP_SINGLE) + pci_unmap_single(ioat_chan->device->pdev, + pci_unmap_addr(desc, dst), + pci_unmap_len(desc, len), + PCI_DMA_FROMDEVICE); + else + pci_unmap_page(ioat_chan->device->pdev, + pci_unmap_addr(desc, dst), + pci_unmap_len(desc, len), + PCI_DMA_FROMDEVICE); + } + + if (!(desc->async_tx.flags & DMA_COMPL_SKIP_SRC_UNMAP)) { + if (desc->async_tx.flags & DMA_COMPL_SRC_UNMAP_SINGLE) + pci_unmap_single(ioat_chan->device->pdev, + pci_unmap_addr(desc, src), + pci_unmap_len(desc, len), + PCI_DMA_TODEVICE); + else + pci_unmap_page(ioat_chan->device->pdev, + pci_unmap_addr(desc, src), + pci_unmap_len(desc, len), + PCI_DMA_TODEVICE); + } } /** @@ -1363,6 +1372,7 @@ static int ioat_dma_self_test(struct ioatdma_device *device) int err = 0; struct completion cmp; unsigned long tmo; + unsigned long flags; src = kzalloc(sizeof(u8) * IOAT_TEST_SIZE, GFP_KERNEL); if (!src) @@ -1392,8 +1402,9 @@ static int ioat_dma_self_test(struct ioatdma_device *device) DMA_TO_DEVICE); dma_dest = dma_map_single(dma_chan->device->dev, dest, IOAT_TEST_SIZE, DMA_FROM_DEVICE); + flags = DMA_COMPL_SRC_UNMAP_SINGLE | DMA_COMPL_DEST_UNMAP_SINGLE; tx = device->common.device_prep_dma_memcpy(dma_chan, dma_dest, dma_src, - IOAT_TEST_SIZE, 0); + IOAT_TEST_SIZE, flags); if (!tx) { dev_err(&device->pdev->dev, "Self-test prep failed, disabling\n"); -- cgit v1.2.3 From ad567ffb32f067b30606071eb568cf637fe42185 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 12 May 2009 09:16:29 +0200 Subject: dma: fix ipu_idmac.c to not discard the last queued buffer This also fixes the case of a single queued buffer, for example, when taking a single frame snapshot with the mx3_camera driver. Reported-by: Agustin Ferrin Pozuelo Tested-by: Agustin Ferrin Pozuelo Signed-off-by: Guennadi Liakhovetski Signed-off-by: Dan Williams --- drivers/dma/ipu/ipu_idmac.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c index 3a4deea78a71..9a5bc1a7389e 100644 --- a/drivers/dma/ipu/ipu_idmac.c +++ b/drivers/dma/ipu/ipu_idmac.c @@ -1272,7 +1272,8 @@ static irqreturn_t idmac_interrupt(int irq, void *dev_id) /* Other interrupts do not interfere with this channel */ spin_lock(&ichan->lock); if (unlikely(chan_id != IDMAC_SDC_0 && chan_id != IDMAC_SDC_1 && - ((curbuf >> chan_id) & 1) == ichan->active_buffer)) { + ((curbuf >> chan_id) & 1) == ichan->active_buffer && + !list_is_last(ichan->queue.next, &ichan->queue))) { int i = 100; /* This doesn't help. See comment in ipu_disable_channel() */ -- cgit v1.2.3 From 5df6d737dd4b0fe9eccf943abb3677cfea05a6c4 Mon Sep 17 00:00:00 2001 From: Abhijeet Joglekar Date: Fri, 17 Apr 2009 18:33:26 -0700 Subject: [SCSI] fnic: Add new Cisco PCI-Express FCoE HBA fnic is a driver for the Cisco PCI-Express FCoE HBA Signed-off-by: Abhijeet Joglekar Signed-off-by: Joe Eykholt Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/Kconfig | 11 + drivers/scsi/Makefile | 1 + drivers/scsi/fnic/Makefile | 15 + drivers/scsi/fnic/cq_desc.h | 78 ++ drivers/scsi/fnic/cq_enet_desc.h | 167 ++++ drivers/scsi/fnic/cq_exch_desc.h | 182 ++++ drivers/scsi/fnic/fcpio.h | 780 ++++++++++++++++ drivers/scsi/fnic/fnic.h | 265 ++++++ drivers/scsi/fnic/fnic_attrs.c | 56 ++ drivers/scsi/fnic/fnic_fcs.c | 742 +++++++++++++++ drivers/scsi/fnic/fnic_io.h | 67 ++ drivers/scsi/fnic/fnic_isr.c | 332 +++++++ drivers/scsi/fnic/fnic_main.c | 942 +++++++++++++++++++ drivers/scsi/fnic/fnic_res.c | 444 +++++++++ drivers/scsi/fnic/fnic_res.h | 197 ++++ drivers/scsi/fnic/fnic_scsi.c | 1850 +++++++++++++++++++++++++++++++++++++ drivers/scsi/fnic/rq_enet_desc.h | 58 ++ drivers/scsi/fnic/vnic_cq.c | 85 ++ drivers/scsi/fnic/vnic_cq.h | 121 +++ drivers/scsi/fnic/vnic_cq_copy.h | 62 ++ drivers/scsi/fnic/vnic_dev.c | 690 ++++++++++++++ drivers/scsi/fnic/vnic_dev.h | 161 ++++ drivers/scsi/fnic/vnic_devcmd.h | 281 ++++++ drivers/scsi/fnic/vnic_intr.c | 60 ++ drivers/scsi/fnic/vnic_intr.h | 118 +++ drivers/scsi/fnic/vnic_nic.h | 69 ++ drivers/scsi/fnic/vnic_resource.h | 61 ++ drivers/scsi/fnic/vnic_rq.c | 196 ++++ drivers/scsi/fnic/vnic_rq.h | 235 +++++ drivers/scsi/fnic/vnic_scsi.h | 99 ++ drivers/scsi/fnic/vnic_stats.h | 68 ++ drivers/scsi/fnic/vnic_wq.c | 182 ++++ drivers/scsi/fnic/vnic_wq.h | 175 ++++ drivers/scsi/fnic/vnic_wq_copy.c | 117 +++ drivers/scsi/fnic/vnic_wq_copy.h | 128 +++ drivers/scsi/fnic/wq_enet_desc.h | 96 ++ 36 files changed, 9191 insertions(+) create mode 100644 drivers/scsi/fnic/Makefile create mode 100644 drivers/scsi/fnic/cq_desc.h create mode 100644 drivers/scsi/fnic/cq_enet_desc.h create mode 100644 drivers/scsi/fnic/cq_exch_desc.h create mode 100644 drivers/scsi/fnic/fcpio.h create mode 100644 drivers/scsi/fnic/fnic.h create mode 100644 drivers/scsi/fnic/fnic_attrs.c create mode 100644 drivers/scsi/fnic/fnic_fcs.c create mode 100644 drivers/scsi/fnic/fnic_io.h create mode 100644 drivers/scsi/fnic/fnic_isr.c create mode 100644 drivers/scsi/fnic/fnic_main.c create mode 100644 drivers/scsi/fnic/fnic_res.c create mode 100644 drivers/scsi/fnic/fnic_res.h create mode 100644 drivers/scsi/fnic/fnic_scsi.c create mode 100644 drivers/scsi/fnic/rq_enet_desc.h create mode 100644 drivers/scsi/fnic/vnic_cq.c create mode 100644 drivers/scsi/fnic/vnic_cq.h create mode 100644 drivers/scsi/fnic/vnic_cq_copy.h create mode 100644 drivers/scsi/fnic/vnic_dev.c create mode 100644 drivers/scsi/fnic/vnic_dev.h create mode 100644 drivers/scsi/fnic/vnic_devcmd.h create mode 100644 drivers/scsi/fnic/vnic_intr.c create mode 100644 drivers/scsi/fnic/vnic_intr.h create mode 100644 drivers/scsi/fnic/vnic_nic.h create mode 100644 drivers/scsi/fnic/vnic_resource.h create mode 100644 drivers/scsi/fnic/vnic_rq.c create mode 100644 drivers/scsi/fnic/vnic_rq.h create mode 100644 drivers/scsi/fnic/vnic_scsi.h create mode 100644 drivers/scsi/fnic/vnic_stats.h create mode 100644 drivers/scsi/fnic/vnic_wq.c create mode 100644 drivers/scsi/fnic/vnic_wq.h create mode 100644 drivers/scsi/fnic/vnic_wq_copy.c create mode 100644 drivers/scsi/fnic/vnic_wq_copy.h create mode 100644 drivers/scsi/fnic/wq_enet_desc.h (limited to 'drivers') diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 8ed2990c826e..fb2740789b68 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -628,6 +628,17 @@ config FCOE ---help--- Fibre Channel over Ethernet module +config FCOE_FNIC + tristate "Cisco FNIC Driver" + depends on PCI && X86 + select LIBFC + help + This is support for the Cisco PCI-Express FCoE HBA. + + To compile this driver as a module, choose M here and read + . + The module will be called fnic. + config SCSI_DMX3191D tristate "DMX3191D SCSI support" depends on PCI && SCSI diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index e7c861ac417d..a5049cfb40ed 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -39,6 +39,7 @@ obj-$(CONFIG_SCSI_DH) += device_handler/ obj-$(CONFIG_LIBFC) += libfc/ obj-$(CONFIG_LIBFCOE) += fcoe/ obj-$(CONFIG_FCOE) += fcoe/ +obj-$(CONFIG_FCOE_FNIC) += fnic/ obj-$(CONFIG_ISCSI_TCP) += libiscsi.o libiscsi_tcp.o iscsi_tcp.o obj-$(CONFIG_INFINIBAND_ISER) += libiscsi.o obj-$(CONFIG_SCSI_A4000T) += 53c700.o a4000t.o diff --git a/drivers/scsi/fnic/Makefile b/drivers/scsi/fnic/Makefile new file mode 100644 index 000000000000..37c3440bc17c --- /dev/null +++ b/drivers/scsi/fnic/Makefile @@ -0,0 +1,15 @@ +obj-$(CONFIG_FCOE_FNIC) += fnic.o + +fnic-y := \ + fnic_attrs.o \ + fnic_isr.o \ + fnic_main.o \ + fnic_res.o \ + fnic_fcs.o \ + fnic_scsi.o \ + vnic_cq.o \ + vnic_dev.o \ + vnic_intr.o \ + vnic_rq.o \ + vnic_wq_copy.o \ + vnic_wq.o diff --git a/drivers/scsi/fnic/cq_desc.h b/drivers/scsi/fnic/cq_desc.h new file mode 100644 index 000000000000..d1225cf6320e --- /dev/null +++ b/drivers/scsi/fnic/cq_desc.h @@ -0,0 +1,78 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _CQ_DESC_H_ +#define _CQ_DESC_H_ + +/* + * Completion queue descriptor types + */ +enum cq_desc_types { + CQ_DESC_TYPE_WQ_ENET = 0, + CQ_DESC_TYPE_DESC_COPY = 1, + CQ_DESC_TYPE_WQ_EXCH = 2, + CQ_DESC_TYPE_RQ_ENET = 3, + CQ_DESC_TYPE_RQ_FCP = 4, +}; + +/* Completion queue descriptor: 16B + * + * All completion queues have this basic layout. The + * type_specfic area is unique for each completion + * queue type. + */ +struct cq_desc { + __le16 completed_index; + __le16 q_number; + u8 type_specfic[11]; + u8 type_color; +}; + +#define CQ_DESC_TYPE_BITS 4 +#define CQ_DESC_TYPE_MASK ((1 << CQ_DESC_TYPE_BITS) - 1) +#define CQ_DESC_COLOR_MASK 1 +#define CQ_DESC_COLOR_SHIFT 7 +#define CQ_DESC_Q_NUM_BITS 10 +#define CQ_DESC_Q_NUM_MASK ((1 << CQ_DESC_Q_NUM_BITS) - 1) +#define CQ_DESC_COMP_NDX_BITS 12 +#define CQ_DESC_COMP_NDX_MASK ((1 << CQ_DESC_COMP_NDX_BITS) - 1) + +static inline void cq_desc_dec(const struct cq_desc *desc_arg, + u8 *type, u8 *color, u16 *q_number, u16 *completed_index) +{ + const struct cq_desc *desc = desc_arg; + const u8 type_color = desc->type_color; + + *color = (type_color >> CQ_DESC_COLOR_SHIFT) & CQ_DESC_COLOR_MASK; + + /* + * Make sure color bit is read from desc *before* other fields + * are read from desc. Hardware guarantees color bit is last + * bit (byte) written. Adding the rmb() prevents the compiler + * and/or CPU from reordering the reads which would potentially + * result in reading stale values. + */ + + rmb(); + + *type = type_color & CQ_DESC_TYPE_MASK; + *q_number = le16_to_cpu(desc->q_number) & CQ_DESC_Q_NUM_MASK; + *completed_index = le16_to_cpu(desc->completed_index) & + CQ_DESC_COMP_NDX_MASK; +} + +#endif /* _CQ_DESC_H_ */ diff --git a/drivers/scsi/fnic/cq_enet_desc.h b/drivers/scsi/fnic/cq_enet_desc.h new file mode 100644 index 000000000000..a9fa26f82ddd --- /dev/null +++ b/drivers/scsi/fnic/cq_enet_desc.h @@ -0,0 +1,167 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _CQ_ENET_DESC_H_ +#define _CQ_ENET_DESC_H_ + +#include "cq_desc.h" + +/* Ethernet completion queue descriptor: 16B */ +struct cq_enet_wq_desc { + __le16 completed_index; + __le16 q_number; + u8 reserved[11]; + u8 type_color; +}; + +static inline void cq_enet_wq_desc_dec(struct cq_enet_wq_desc *desc, + u8 *type, u8 *color, u16 *q_number, u16 *completed_index) +{ + cq_desc_dec((struct cq_desc *)desc, type, + color, q_number, completed_index); +} + +/* Completion queue descriptor: Ethernet receive queue, 16B */ +struct cq_enet_rq_desc { + __le16 completed_index_flags; + __le16 q_number_rss_type_flags; + __le32 rss_hash; + __le16 bytes_written_flags; + __le16 vlan; + __le16 checksum_fcoe; + u8 flags; + u8 type_color; +}; + +#define CQ_ENET_RQ_DESC_FLAGS_INGRESS_PORT (0x1 << 12) +#define CQ_ENET_RQ_DESC_FLAGS_FCOE (0x1 << 13) +#define CQ_ENET_RQ_DESC_FLAGS_EOP (0x1 << 14) +#define CQ_ENET_RQ_DESC_FLAGS_SOP (0x1 << 15) + +#define CQ_ENET_RQ_DESC_RSS_TYPE_BITS 4 +#define CQ_ENET_RQ_DESC_RSS_TYPE_MASK \ + ((1 << CQ_ENET_RQ_DESC_RSS_TYPE_BITS) - 1) +#define CQ_ENET_RQ_DESC_RSS_TYPE_NONE 0 +#define CQ_ENET_RQ_DESC_RSS_TYPE_IPv4 1 +#define CQ_ENET_RQ_DESC_RSS_TYPE_TCP_IPv4 2 +#define CQ_ENET_RQ_DESC_RSS_TYPE_IPv6 3 +#define CQ_ENET_RQ_DESC_RSS_TYPE_TCP_IPv6 4 +#define CQ_ENET_RQ_DESC_RSS_TYPE_IPv6_EX 5 +#define CQ_ENET_RQ_DESC_RSS_TYPE_TCP_IPv6_EX 6 + +#define CQ_ENET_RQ_DESC_FLAGS_CSUM_NOT_CALC (0x1 << 14) + +#define CQ_ENET_RQ_DESC_BYTES_WRITTEN_BITS 14 +#define CQ_ENET_RQ_DESC_BYTES_WRITTEN_MASK \ + ((1 << CQ_ENET_RQ_DESC_BYTES_WRITTEN_BITS) - 1) +#define CQ_ENET_RQ_DESC_FLAGS_TRUNCATED (0x1 << 14) +#define CQ_ENET_RQ_DESC_FLAGS_VLAN_STRIPPED (0x1 << 15) + +#define CQ_ENET_RQ_DESC_FCOE_SOF_BITS 4 +#define CQ_ENET_RQ_DESC_FCOE_SOF_MASK \ + ((1 << CQ_ENET_RQ_DESC_FCOE_SOF_BITS) - 1) +#define CQ_ENET_RQ_DESC_FCOE_EOF_BITS 8 +#define CQ_ENET_RQ_DESC_FCOE_EOF_MASK \ + ((1 << CQ_ENET_RQ_DESC_FCOE_EOF_BITS) - 1) +#define CQ_ENET_RQ_DESC_FCOE_EOF_SHIFT 8 + +#define CQ_ENET_RQ_DESC_FLAGS_TCP_UDP_CSUM_OK (0x1 << 0) +#define CQ_ENET_RQ_DESC_FCOE_FC_CRC_OK (0x1 << 0) +#define CQ_ENET_RQ_DESC_FLAGS_UDP (0x1 << 1) +#define CQ_ENET_RQ_DESC_FCOE_ENC_ERROR (0x1 << 1) +#define CQ_ENET_RQ_DESC_FLAGS_TCP (0x1 << 2) +#define CQ_ENET_RQ_DESC_FLAGS_IPV4_CSUM_OK (0x1 << 3) +#define CQ_ENET_RQ_DESC_FLAGS_IPV6 (0x1 << 4) +#define CQ_ENET_RQ_DESC_FLAGS_IPV4 (0x1 << 5) +#define CQ_ENET_RQ_DESC_FLAGS_IPV4_FRAGMENT (0x1 << 6) +#define CQ_ENET_RQ_DESC_FLAGS_FCS_OK (0x1 << 7) + +static inline void cq_enet_rq_desc_dec(struct cq_enet_rq_desc *desc, + u8 *type, u8 *color, u16 *q_number, u16 *completed_index, + u8 *ingress_port, u8 *fcoe, u8 *eop, u8 *sop, u8 *rss_type, + u8 *csum_not_calc, u32 *rss_hash, u16 *bytes_written, u8 *packet_error, + u8 *vlan_stripped, u16 *vlan, u16 *checksum, u8 *fcoe_sof, + u8 *fcoe_fc_crc_ok, u8 *fcoe_enc_error, u8 *fcoe_eof, + u8 *tcp_udp_csum_ok, u8 *udp, u8 *tcp, u8 *ipv4_csum_ok, + u8 *ipv6, u8 *ipv4, u8 *ipv4_fragment, u8 *fcs_ok) +{ + u16 completed_index_flags = le16_to_cpu(desc->completed_index_flags); + u16 q_number_rss_type_flags = + le16_to_cpu(desc->q_number_rss_type_flags); + u16 bytes_written_flags = le16_to_cpu(desc->bytes_written_flags); + + cq_desc_dec((struct cq_desc *)desc, type, + color, q_number, completed_index); + + *ingress_port = (completed_index_flags & + CQ_ENET_RQ_DESC_FLAGS_INGRESS_PORT) ? 1 : 0; + *fcoe = (completed_index_flags & CQ_ENET_RQ_DESC_FLAGS_FCOE) ? + 1 : 0; + *eop = (completed_index_flags & CQ_ENET_RQ_DESC_FLAGS_EOP) ? + 1 : 0; + *sop = (completed_index_flags & CQ_ENET_RQ_DESC_FLAGS_SOP) ? + 1 : 0; + + *rss_type = (u8)((q_number_rss_type_flags >> CQ_DESC_Q_NUM_BITS) & + CQ_ENET_RQ_DESC_RSS_TYPE_MASK); + *csum_not_calc = (q_number_rss_type_flags & + CQ_ENET_RQ_DESC_FLAGS_CSUM_NOT_CALC) ? 1 : 0; + + *rss_hash = le32_to_cpu(desc->rss_hash); + + *bytes_written = bytes_written_flags & + CQ_ENET_RQ_DESC_BYTES_WRITTEN_MASK; + *packet_error = (bytes_written_flags & + CQ_ENET_RQ_DESC_FLAGS_TRUNCATED) ? 1 : 0; + *vlan_stripped = (bytes_written_flags & + CQ_ENET_RQ_DESC_FLAGS_VLAN_STRIPPED) ? 1 : 0; + + *vlan = le16_to_cpu(desc->vlan); + + if (*fcoe) { + *fcoe_sof = (u8)(le16_to_cpu(desc->checksum_fcoe) & + CQ_ENET_RQ_DESC_FCOE_SOF_MASK); + *fcoe_fc_crc_ok = (desc->flags & + CQ_ENET_RQ_DESC_FCOE_FC_CRC_OK) ? 1 : 0; + *fcoe_enc_error = (desc->flags & + CQ_ENET_RQ_DESC_FCOE_ENC_ERROR) ? 1 : 0; + *fcoe_eof = (u8)((desc->checksum_fcoe >> + CQ_ENET_RQ_DESC_FCOE_EOF_SHIFT) & + CQ_ENET_RQ_DESC_FCOE_EOF_MASK); + *checksum = 0; + } else { + *fcoe_sof = 0; + *fcoe_fc_crc_ok = 0; + *fcoe_enc_error = 0; + *fcoe_eof = 0; + *checksum = le16_to_cpu(desc->checksum_fcoe); + } + + *tcp_udp_csum_ok = + (desc->flags & CQ_ENET_RQ_DESC_FLAGS_TCP_UDP_CSUM_OK) ? 1 : 0; + *udp = (desc->flags & CQ_ENET_RQ_DESC_FLAGS_UDP) ? 1 : 0; + *tcp = (desc->flags & CQ_ENET_RQ_DESC_FLAGS_TCP) ? 1 : 0; + *ipv4_csum_ok = + (desc->flags & CQ_ENET_RQ_DESC_FLAGS_IPV4_CSUM_OK) ? 1 : 0; + *ipv6 = (desc->flags & CQ_ENET_RQ_DESC_FLAGS_IPV6) ? 1 : 0; + *ipv4 = (desc->flags & CQ_ENET_RQ_DESC_FLAGS_IPV4) ? 1 : 0; + *ipv4_fragment = + (desc->flags & CQ_ENET_RQ_DESC_FLAGS_IPV4_FRAGMENT) ? 1 : 0; + *fcs_ok = (desc->flags & CQ_ENET_RQ_DESC_FLAGS_FCS_OK) ? 1 : 0; +} + +#endif /* _CQ_ENET_DESC_H_ */ diff --git a/drivers/scsi/fnic/cq_exch_desc.h b/drivers/scsi/fnic/cq_exch_desc.h new file mode 100644 index 000000000000..501660cfe228 --- /dev/null +++ b/drivers/scsi/fnic/cq_exch_desc.h @@ -0,0 +1,182 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _CQ_EXCH_DESC_H_ +#define _CQ_EXCH_DESC_H_ + +#include "cq_desc.h" + +/* Exchange completion queue descriptor: 16B */ +struct cq_exch_wq_desc { + u16 completed_index; + u16 q_number; + u16 exchange_id; + u8 tmpl; + u8 reserved0; + u32 reserved1; + u8 exch_status; + u8 reserved2[2]; + u8 type_color; +}; + +#define CQ_EXCH_WQ_STATUS_BITS 2 +#define CQ_EXCH_WQ_STATUS_MASK ((1 << CQ_EXCH_WQ_STATUS_BITS) - 1) + +enum cq_exch_status_types { + CQ_EXCH_WQ_STATUS_TYPE_COMPLETE = 0, + CQ_EXCH_WQ_STATUS_TYPE_ABORT = 1, + CQ_EXCH_WQ_STATUS_TYPE_SGL_EOF = 2, + CQ_EXCH_WQ_STATUS_TYPE_TMPL_ERR = 3, +}; + +static inline void cq_exch_wq_desc_dec(struct cq_exch_wq_desc *desc_ptr, + u8 *type, + u8 *color, + u16 *q_number, + u16 *completed_index, + u8 *exch_status) +{ + cq_desc_dec((struct cq_desc *)desc_ptr, type, + color, q_number, completed_index); + *exch_status = desc_ptr->exch_status & CQ_EXCH_WQ_STATUS_MASK; +} + +struct cq_fcp_rq_desc { + u16 completed_index_eop_sop_prt; + u16 q_number; + u16 exchange_id; + u16 tmpl; + u16 bytes_written; + u16 vlan; + u8 sof; + u8 eof; + u8 fcs_fer_fck; + u8 type_color; +}; + +#define CQ_FCP_RQ_DESC_FLAGS_SOP (1 << 15) +#define CQ_FCP_RQ_DESC_FLAGS_EOP (1 << 14) +#define CQ_FCP_RQ_DESC_FLAGS_PRT (1 << 12) +#define CQ_FCP_RQ_DESC_TMPL_MASK 0x1f +#define CQ_FCP_RQ_DESC_BYTES_WRITTEN_MASK 0x3fff +#define CQ_FCP_RQ_DESC_PACKET_ERR_SHIFT 14 +#define CQ_FCP_RQ_DESC_PACKET_ERR_MASK (1 << CQ_FCP_RQ_DESC_PACKET_ERR_SHIFT) +#define CQ_FCP_RQ_DESC_VS_STRIPPED_SHIFT 15 +#define CQ_FCP_RQ_DESC_VS_STRIPPED_MASK (1 << CQ_FCP_RQ_DESC_VS_STRIPPED_SHIFT) +#define CQ_FCP_RQ_DESC_FC_CRC_OK_MASK 0x1 +#define CQ_FCP_RQ_DESC_FCOE_ERR_SHIFT 1 +#define CQ_FCP_RQ_DESC_FCOE_ERR_MASK (1 << CQ_FCP_RQ_DESC_FCOE_ERR_SHIFT) +#define CQ_FCP_RQ_DESC_FCS_OK_SHIFT 7 +#define CQ_FCP_RQ_DESC_FCS_OK_MASK (1 << CQ_FCP_RQ_DESC_FCS_OK_SHIFT) + +static inline void cq_fcp_rq_desc_dec(struct cq_fcp_rq_desc *desc_ptr, + u8 *type, + u8 *color, + u16 *q_number, + u16 *completed_index, + u8 *eop, + u8 *sop, + u8 *fck, + u16 *exchange_id, + u16 *tmpl, + u32 *bytes_written, + u8 *sof, + u8 *eof, + u8 *ingress_port, + u8 *packet_err, + u8 *fcoe_err, + u8 *fcs_ok, + u8 *vlan_stripped, + u16 *vlan) +{ + cq_desc_dec((struct cq_desc *)desc_ptr, type, + color, q_number, completed_index); + *eop = (desc_ptr->completed_index_eop_sop_prt & + CQ_FCP_RQ_DESC_FLAGS_EOP) ? 1 : 0; + *sop = (desc_ptr->completed_index_eop_sop_prt & + CQ_FCP_RQ_DESC_FLAGS_SOP) ? 1 : 0; + *ingress_port = + (desc_ptr->completed_index_eop_sop_prt & + CQ_FCP_RQ_DESC_FLAGS_PRT) ? 1 : 0; + *exchange_id = desc_ptr->exchange_id; + *tmpl = desc_ptr->tmpl & CQ_FCP_RQ_DESC_TMPL_MASK; + *bytes_written = + desc_ptr->bytes_written & CQ_FCP_RQ_DESC_BYTES_WRITTEN_MASK; + *packet_err = + (desc_ptr->bytes_written & CQ_FCP_RQ_DESC_PACKET_ERR_MASK) >> + CQ_FCP_RQ_DESC_PACKET_ERR_SHIFT; + *vlan_stripped = + (desc_ptr->bytes_written & CQ_FCP_RQ_DESC_VS_STRIPPED_MASK) >> + CQ_FCP_RQ_DESC_VS_STRIPPED_SHIFT; + *vlan = desc_ptr->vlan; + *sof = desc_ptr->sof; + *fck = desc_ptr->fcs_fer_fck & CQ_FCP_RQ_DESC_FC_CRC_OK_MASK; + *fcoe_err = (desc_ptr->fcs_fer_fck & CQ_FCP_RQ_DESC_FCOE_ERR_MASK) >> + CQ_FCP_RQ_DESC_FCOE_ERR_SHIFT; + *eof = desc_ptr->eof; + *fcs_ok = + (desc_ptr->fcs_fer_fck & CQ_FCP_RQ_DESC_FCS_OK_MASK) >> + CQ_FCP_RQ_DESC_FCS_OK_SHIFT; +} + +struct cq_sgl_desc { + u16 exchange_id; + u16 q_number; + u32 active_burst_offset; + u32 tot_data_bytes; + u16 tmpl; + u8 sgl_err; + u8 type_color; +}; + +enum cq_sgl_err_types { + CQ_SGL_ERR_NO_ERROR = 0, + CQ_SGL_ERR_OVERFLOW, /* data ran beyond end of SGL */ + CQ_SGL_ERR_SGL_LCL_ADDR_ERR, /* sgl access to local vnic addr illegal*/ + CQ_SGL_ERR_ADDR_RSP_ERR, /* sgl address error */ + CQ_SGL_ERR_DATA_RSP_ERR, /* sgl data rsp error */ + CQ_SGL_ERR_CNT_ZERO_ERR, /* SGL count is 0 */ + CQ_SGL_ERR_CNT_MAX_ERR, /* SGL count is larger than supported */ + CQ_SGL_ERR_ORDER_ERR, /* frames recv on both ports, order err */ + CQ_SGL_ERR_DATA_LCL_ADDR_ERR,/* sgl data buf to local vnic addr ill */ + CQ_SGL_ERR_HOST_CQ_ERR, /* host cq entry to local vnic addr ill */ +}; + +#define CQ_SGL_SGL_ERR_MASK 0x1f +#define CQ_SGL_TMPL_MASK 0x1f + +static inline void cq_sgl_desc_dec(struct cq_sgl_desc *desc_ptr, + u8 *type, + u8 *color, + u16 *q_number, + u16 *exchange_id, + u32 *active_burst_offset, + u32 *tot_data_bytes, + u16 *tmpl, + u8 *sgl_err) +{ + /* Cheat a little by assuming exchange_id is the same as completed + index */ + cq_desc_dec((struct cq_desc *)desc_ptr, type, color, q_number, + exchange_id); + *active_burst_offset = desc_ptr->active_burst_offset; + *tot_data_bytes = desc_ptr->tot_data_bytes; + *tmpl = desc_ptr->tmpl & CQ_SGL_TMPL_MASK; + *sgl_err = desc_ptr->sgl_err & CQ_SGL_SGL_ERR_MASK; +} + +#endif /* _CQ_EXCH_DESC_H_ */ diff --git a/drivers/scsi/fnic/fcpio.h b/drivers/scsi/fnic/fcpio.h new file mode 100644 index 000000000000..12d770d885c5 --- /dev/null +++ b/drivers/scsi/fnic/fcpio.h @@ -0,0 +1,780 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _FCPIO_H_ +#define _FCPIO_H_ + +#include + +/* + * This header file includes all of the data structures used for + * communication by the host driver to the fcp firmware. + */ + +/* + * Exchange and sequence id space allocated to the host driver + */ +#define FCPIO_HOST_EXCH_RANGE_START 0x1000 +#define FCPIO_HOST_EXCH_RANGE_END 0x1fff +#define FCPIO_HOST_SEQ_ID_RANGE_START 0x80 +#define FCPIO_HOST_SEQ_ID_RANGE_END 0xff + +/* + * Command entry type + */ +enum fcpio_type { + /* + * Initiator request types + */ + FCPIO_ICMND_16 = 0x1, + FCPIO_ICMND_32, + FCPIO_ICMND_CMPL, + FCPIO_ITMF, + FCPIO_ITMF_CMPL, + + /* + * Target request types + */ + FCPIO_TCMND_16 = 0x11, + FCPIO_TCMND_32, + FCPIO_TDATA, + FCPIO_TXRDY, + FCPIO_TRSP, + FCPIO_TDRSP_CMPL, + FCPIO_TTMF, + FCPIO_TTMF_ACK, + FCPIO_TABORT, + FCPIO_TABORT_CMPL, + + /* + * Misc request types + */ + FCPIO_ACK = 0x20, + FCPIO_RESET, + FCPIO_RESET_CMPL, + FCPIO_FLOGI_REG, + FCPIO_FLOGI_REG_CMPL, + FCPIO_ECHO, + FCPIO_ECHO_CMPL, + FCPIO_LUNMAP_CHNG, + FCPIO_LUNMAP_REQ, + FCPIO_LUNMAP_REQ_CMPL, + FCPIO_FLOGI_FIP_REG, + FCPIO_FLOGI_FIP_REG_CMPL, +}; + +/* + * Header status codes from the firmware + */ +enum fcpio_status { + FCPIO_SUCCESS = 0, /* request was successful */ + + /* + * If a request to the firmware is rejected, the original request + * header will be returned with the status set to one of the following: + */ + FCPIO_INVALID_HEADER, /* header contains invalid data */ + FCPIO_OUT_OF_RESOURCE, /* out of resources to complete request */ + FCPIO_INVALID_PARAM, /* some parameter in request is invalid */ + FCPIO_REQ_NOT_SUPPORTED, /* request type is not supported */ + FCPIO_IO_NOT_FOUND, /* requested I/O was not found */ + + /* + * Once a request is processed, the firmware will usually return + * a cmpl message type. In cases where errors occurred, + * the header status field would be filled in with one of the following: + */ + FCPIO_ABORTED = 0x41, /* request was aborted */ + FCPIO_TIMEOUT, /* request was timed out */ + FCPIO_SGL_INVALID, /* request was aborted due to sgl error */ + FCPIO_MSS_INVALID, /* request was aborted due to mss error */ + FCPIO_DATA_CNT_MISMATCH, /* recv/sent more/less data than exp. */ + FCPIO_FW_ERR, /* request was terminated due to fw error */ + FCPIO_ITMF_REJECTED, /* itmf req was rejected by remote node */ + FCPIO_ITMF_FAILED, /* itmf req was failed by remote node */ + FCPIO_ITMF_INCORRECT_LUN, /* itmf req targeted incorrect LUN */ + FCPIO_CMND_REJECTED, /* request was invalid and rejected */ + FCPIO_NO_PATH_AVAIL, /* no paths to the lun was available */ + FCPIO_PATH_FAILED, /* i/o sent to current path failed */ + FCPIO_LUNMAP_CHNG_PEND, /* i/o rejected due to lunmap change */ +}; + +/* + * The header command tag. All host requests will use the "tag" field + * to mark commands with a unique tag. When the firmware responds to + * a host request, it will copy the tag field into the response. + * + * The only firmware requests that will use the rx_id/ox_id fields instead + * of the tag field will be the target command and target task management + * requests. These two requests do not have corresponding host requests + * since they come directly from the FC initiator on the network. + */ +struct fcpio_tag { + union { + u32 req_id; + struct { + u16 rx_id; + u16 ox_id; + } ex_id; + } u; +}; + +static inline void +fcpio_tag_id_enc(struct fcpio_tag *tag, u32 id) +{ + tag->u.req_id = id; +} + +static inline void +fcpio_tag_id_dec(struct fcpio_tag *tag, u32 *id) +{ + *id = tag->u.req_id; +} + +static inline void +fcpio_tag_exid_enc(struct fcpio_tag *tag, u16 ox_id, u16 rx_id) +{ + tag->u.ex_id.rx_id = rx_id; + tag->u.ex_id.ox_id = ox_id; +} + +static inline void +fcpio_tag_exid_dec(struct fcpio_tag *tag, u16 *ox_id, u16 *rx_id) +{ + *rx_id = tag->u.ex_id.rx_id; + *ox_id = tag->u.ex_id.ox_id; +} + +/* + * The header for an fcpio request, whether from the firmware or from the + * host driver + */ +struct fcpio_header { + u8 type; /* enum fcpio_type */ + u8 status; /* header status entry */ + u16 _resvd; /* reserved */ + struct fcpio_tag tag; /* header tag */ +}; + +static inline void +fcpio_header_enc(struct fcpio_header *hdr, + u8 type, u8 status, + struct fcpio_tag tag) +{ + hdr->type = type; + hdr->status = status; + hdr->_resvd = 0; + hdr->tag = tag; +} + +static inline void +fcpio_header_dec(struct fcpio_header *hdr, + u8 *type, u8 *status, + struct fcpio_tag *tag) +{ + *type = hdr->type; + *status = hdr->status; + *tag = hdr->tag; +} + +#define CDB_16 16 +#define CDB_32 32 +#define LUN_ADDRESS 8 + +/* + * fcpio_icmnd_16: host -> firmware request + * + * used for sending out an initiator SCSI 16-byte command + */ +struct fcpio_icmnd_16 { + u32 lunmap_id; /* index into lunmap table */ + u8 special_req_flags; /* special exchange request flags */ + u8 _resvd0[3]; /* reserved */ + u32 sgl_cnt; /* scatter-gather list count */ + u32 sense_len; /* sense buffer length */ + u64 sgl_addr; /* scatter-gather list addr */ + u64 sense_addr; /* sense buffer address */ + u8 crn; /* SCSI Command Reference No. */ + u8 pri_ta; /* SCSI Priority and Task attribute */ + u8 _resvd1; /* reserved: should be 0 */ + u8 flags; /* command flags */ + u8 scsi_cdb[CDB_16]; /* SCSI Cmnd Descriptor Block */ + u32 data_len; /* length of data expected */ + u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */ + u8 _resvd2; /* reserved */ + u8 d_id[3]; /* FC vNIC only: Target D_ID */ + u16 mss; /* FC vNIC only: max burst */ + u16 _resvd3; /* reserved */ + u32 r_a_tov; /* FC vNIC only: Res. Alloc Timeout */ + u32 e_d_tov; /* FC vNIC only: Err Detect Timeout */ +}; + +/* + * Special request flags + */ +#define FCPIO_ICMND_SRFLAG_RETRY 0x01 /* Enable Retry handling on exchange */ + +/* + * Priority/Task Attribute settings + */ +#define FCPIO_ICMND_PTA_SIMPLE 0 /* simple task attribute */ +#define FCPIO_ICMND_PTA_HEADQ 1 /* head of queue task attribute */ +#define FCPIO_ICMND_PTA_ORDERED 2 /* ordered task attribute */ +#define FCPIO_ICMND_PTA_ACA 4 /* auto contingent allegiance */ +#define FCPIO_ICMND_PRI_SHIFT 3 /* priority field starts in bit 3 */ + +/* + * Command flags + */ +#define FCPIO_ICMND_RDDATA 0x02 /* read data */ +#define FCPIO_ICMND_WRDATA 0x01 /* write data */ + +/* + * fcpio_icmnd_32: host -> firmware request + * + * used for sending out an initiator SCSI 32-byte command + */ +struct fcpio_icmnd_32 { + u32 lunmap_id; /* index into lunmap table */ + u8 special_req_flags; /* special exchange request flags */ + u8 _resvd0[3]; /* reserved */ + u32 sgl_cnt; /* scatter-gather list count */ + u32 sense_len; /* sense buffer length */ + u64 sgl_addr; /* scatter-gather list addr */ + u64 sense_addr; /* sense buffer address */ + u8 crn; /* SCSI Command Reference No. */ + u8 pri_ta; /* SCSI Priority and Task attribute */ + u8 _resvd1; /* reserved: should be 0 */ + u8 flags; /* command flags */ + u8 scsi_cdb[CDB_32]; /* SCSI Cmnd Descriptor Block */ + u32 data_len; /* length of data expected */ + u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */ + u8 _resvd2; /* reserved */ + u8 d_id[3]; /* FC vNIC only: Target D_ID */ + u16 mss; /* FC vNIC only: max burst */ + u16 _resvd3; /* reserved */ + u32 r_a_tov; /* FC vNIC only: Res. Alloc Timeout */ + u32 e_d_tov; /* FC vNIC only: Error Detect Timeout */ +}; + +/* + * fcpio_itmf: host -> firmware request + * + * used for requesting the firmware to abort a request and/or send out + * a task management function + * + * The t_tag field is only needed when the request type is ABT_TASK. + */ +struct fcpio_itmf { + u32 lunmap_id; /* index into lunmap table */ + u32 tm_req; /* SCSI Task Management request */ + u32 t_tag; /* header tag of fcpio to be aborted */ + u32 _resvd; /* _reserved */ + u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */ + u8 _resvd1; /* reserved */ + u8 d_id[3]; /* FC vNIC only: Target D_ID */ + u32 r_a_tov; /* FC vNIC only: R_A_TOV in msec */ + u32 e_d_tov; /* FC vNIC only: E_D_TOV in msec */ +}; + +/* + * Task Management request + */ +enum fcpio_itmf_tm_req_type { + FCPIO_ITMF_ABT_TASK_TERM = 0x01, /* abort task and terminate */ + FCPIO_ITMF_ABT_TASK, /* abort task and issue abts */ + FCPIO_ITMF_ABT_TASK_SET, /* abort task set */ + FCPIO_ITMF_CLR_TASK_SET, /* clear task set */ + FCPIO_ITMF_LUN_RESET, /* logical unit reset task mgmt */ + FCPIO_ITMF_CLR_ACA, /* Clear ACA condition */ +}; + +/* + * fcpio_tdata: host -> firmware request + * + * used for requesting the firmware to send out a read data transfer for a + * target command + */ +struct fcpio_tdata { + u16 rx_id; /* FC rx_id of target command */ + u16 flags; /* command flags */ + u32 rel_offset; /* data sequence relative offset */ + u32 sgl_cnt; /* scatter-gather list count */ + u32 data_len; /* length of data expected to send */ + u64 sgl_addr; /* scatter-gather list address */ +}; + +/* + * Command flags + */ +#define FCPIO_TDATA_SCSI_RSP 0x01 /* send a scsi resp. after last frame */ + +/* + * fcpio_txrdy: host -> firmware request + * + * used for requesting the firmware to send out a write data transfer for a + * target command + */ +struct fcpio_txrdy { + u16 rx_id; /* FC rx_id of target command */ + u16 _resvd0; /* reserved */ + u32 rel_offset; /* data sequence relative offset */ + u32 sgl_cnt; /* scatter-gather list count */ + u32 data_len; /* length of data expected to send */ + u64 sgl_addr; /* scatter-gather list address */ +}; + +/* + * fcpio_trsp: host -> firmware request + * + * used for requesting the firmware to send out a response for a target + * command + */ +struct fcpio_trsp { + u16 rx_id; /* FC rx_id of target command */ + u16 _resvd0; /* reserved */ + u32 sense_len; /* sense data buffer length */ + u64 sense_addr; /* sense data buffer address */ + u16 _resvd1; /* reserved */ + u8 flags; /* response request flags */ + u8 scsi_status; /* SCSI status */ + u32 residual; /* SCSI data residual value of I/O */ +}; + +/* + * resposnse request flags + */ +#define FCPIO_TRSP_RESID_UNDER 0x08 /* residual is valid and is underflow */ +#define FCPIO_TRSP_RESID_OVER 0x04 /* residual is valid and is overflow */ + +/* + * fcpio_ttmf_ack: host -> firmware response + * + * used by the host to indicate to the firmware it has received and processed + * the target tmf request + */ +struct fcpio_ttmf_ack { + u16 rx_id; /* FC rx_id of target command */ + u16 _resvd0; /* reserved */ + u32 tmf_status; /* SCSI task management status */ +}; + +/* + * fcpio_tabort: host -> firmware request + * + * used by the host to request the firmware to abort a target request that was + * received by the firmware + */ +struct fcpio_tabort { + u16 rx_id; /* rx_id of the target request */ +}; + +/* + * fcpio_reset: host -> firmware request + * + * used by the host to signal a reset of the driver to the firmware + * and to request firmware to clean up all outstanding I/O + */ +struct fcpio_reset { + u32 _resvd; +}; + +enum fcpio_flogi_reg_format_type { + FCPIO_FLOGI_REG_DEF_DEST = 0, /* Use the oui | s_id mac format */ + FCPIO_FLOGI_REG_GW_DEST, /* Use the fixed gateway mac */ +}; + +/* + * fcpio_flogi_reg: host -> firmware request + * + * fc vnic only + * used by the host to notify the firmware of the lif's s_id + * and destination mac address format + */ +struct fcpio_flogi_reg { + u8 format; + u8 s_id[3]; /* FC vNIC only: Source S_ID */ + u8 gateway_mac[ETH_ALEN]; /* Destination gateway mac */ + u16 _resvd; + u32 r_a_tov; /* R_A_TOV in msec */ + u32 e_d_tov; /* E_D_TOV in msec */ +}; + +/* + * fcpio_echo: host -> firmware request + * + * sends a heartbeat echo request to the firmware + */ +struct fcpio_echo { + u32 _resvd; +}; + +/* + * fcpio_lunmap_req: host -> firmware request + * + * scsi vnic only + * sends a request to retrieve the lunmap table for scsi vnics + */ +struct fcpio_lunmap_req { + u64 addr; /* address of the buffer */ + u32 len; /* len of the buffer */ +}; + +/* + * fcpio_flogi_fip_reg: host -> firmware request + * + * fc vnic only + * used by the host to notify the firmware of the lif's s_id + * and destination mac address format + */ +struct fcpio_flogi_fip_reg { + u8 _resvd0; + u8 s_id[3]; /* FC vNIC only: Source S_ID */ + u8 fcf_mac[ETH_ALEN]; /* FCF Target destination mac */ + u16 _resvd1; + u32 r_a_tov; /* R_A_TOV in msec */ + u32 e_d_tov; /* E_D_TOV in msec */ + u8 ha_mac[ETH_ALEN]; /* Host adapter source mac */ + u16 _resvd2; +}; + +/* + * Basic structure for all fcpio structures that are sent from the host to the + * firmware. They are 128 bytes per structure. + */ +#define FCPIO_HOST_REQ_LEN 128 /* expected length of host requests */ + +struct fcpio_host_req { + struct fcpio_header hdr; + + union { + /* + * Defines space needed for request + */ + u8 buf[FCPIO_HOST_REQ_LEN - sizeof(struct fcpio_header)]; + + /* + * Initiator host requests + */ + struct fcpio_icmnd_16 icmnd_16; + struct fcpio_icmnd_32 icmnd_32; + struct fcpio_itmf itmf; + + /* + * Target host requests + */ + struct fcpio_tdata tdata; + struct fcpio_txrdy txrdy; + struct fcpio_trsp trsp; + struct fcpio_ttmf_ack ttmf_ack; + struct fcpio_tabort tabort; + + /* + * Misc requests + */ + struct fcpio_reset reset; + struct fcpio_flogi_reg flogi_reg; + struct fcpio_echo echo; + struct fcpio_lunmap_req lunmap_req; + struct fcpio_flogi_fip_reg flogi_fip_reg; + } u; +}; + +/* + * fcpio_icmnd_cmpl: firmware -> host response + * + * used for sending the host a response to an initiator command + */ +struct fcpio_icmnd_cmpl { + u8 _resvd0[6]; /* reserved */ + u8 flags; /* response flags */ + u8 scsi_status; /* SCSI status */ + u32 residual; /* SCSI data residual length */ + u32 sense_len; /* SCSI sense length */ +}; + +/* + * response flags + */ +#define FCPIO_ICMND_CMPL_RESID_UNDER 0x08 /* resid under and valid */ +#define FCPIO_ICMND_CMPL_RESID_OVER 0x04 /* resid over and valid */ + +/* + * fcpio_itmf_cmpl: firmware -> host response + * + * used for sending the host a response for a itmf request + */ +struct fcpio_itmf_cmpl { + u32 _resvd; /* reserved */ +}; + +/* + * fcpio_tcmnd_16: firmware -> host request + * + * used by the firmware to notify the host of an incoming target SCSI 16-Byte + * request + */ +struct fcpio_tcmnd_16 { + u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */ + u8 crn; /* SCSI Command Reference No. */ + u8 pri_ta; /* SCSI Priority and Task attribute */ + u8 _resvd2; /* reserved: should be 0 */ + u8 flags; /* command flags */ + u8 scsi_cdb[CDB_16]; /* SCSI Cmnd Descriptor Block */ + u32 data_len; /* length of data expected */ + u8 _resvd1; /* reserved */ + u8 s_id[3]; /* FC vNIC only: Source S_ID */ +}; + +/* + * Priority/Task Attribute settings + */ +#define FCPIO_TCMND_PTA_SIMPLE 0 /* simple task attribute */ +#define FCPIO_TCMND_PTA_HEADQ 1 /* head of queue task attribute */ +#define FCPIO_TCMND_PTA_ORDERED 2 /* ordered task attribute */ +#define FCPIO_TCMND_PTA_ACA 4 /* auto contingent allegiance */ +#define FCPIO_TCMND_PRI_SHIFT 3 /* priority field starts in bit 3 */ + +/* + * Command flags + */ +#define FCPIO_TCMND_RDDATA 0x02 /* read data */ +#define FCPIO_TCMND_WRDATA 0x01 /* write data */ + +/* + * fcpio_tcmnd_32: firmware -> host request + * + * used by the firmware to notify the host of an incoming target SCSI 32-Byte + * request + */ +struct fcpio_tcmnd_32 { + u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */ + u8 crn; /* SCSI Command Reference No. */ + u8 pri_ta; /* SCSI Priority and Task attribute */ + u8 _resvd2; /* reserved: should be 0 */ + u8 flags; /* command flags */ + u8 scsi_cdb[CDB_32]; /* SCSI Cmnd Descriptor Block */ + u32 data_len; /* length of data expected */ + u8 _resvd0; /* reserved */ + u8 s_id[3]; /* FC vNIC only: Source S_ID */ +}; + +/* + * fcpio_tdrsp_cmpl: firmware -> host response + * + * used by the firmware to notify the host of a response to a host target + * command + */ +struct fcpio_tdrsp_cmpl { + u16 rx_id; /* rx_id of the target request */ + u16 _resvd0; /* reserved */ +}; + +/* + * fcpio_ttmf: firmware -> host request + * + * used by the firmware to notify the host of an incoming task management + * function request + */ +struct fcpio_ttmf { + u8 _resvd0; /* reserved */ + u8 s_id[3]; /* FC vNIC only: Source S_ID */ + u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */ + u8 crn; /* SCSI Command Reference No. */ + u8 _resvd2[3]; /* reserved */ + u32 tmf_type; /* task management request type */ +}; + +/* + * Task Management request + */ +#define FCPIO_TTMF_CLR_ACA 0x40 /* Clear ACA condition */ +#define FCPIO_TTMF_LUN_RESET 0x10 /* logical unit reset task mgmt */ +#define FCPIO_TTMF_CLR_TASK_SET 0x04 /* clear task set */ +#define FCPIO_TTMF_ABT_TASK_SET 0x02 /* abort task set */ +#define FCPIO_TTMF_ABT_TASK 0x01 /* abort task */ + +/* + * fcpio_tabort_cmpl: firmware -> host response + * + * used by the firmware to respond to a host's tabort request + */ +struct fcpio_tabort_cmpl { + u16 rx_id; /* rx_id of the target request */ + u16 _resvd0; /* reserved */ +}; + +/* + * fcpio_ack: firmware -> host response + * + * used by firmware to notify the host of the last work request received + */ +struct fcpio_ack { + u16 request_out; /* last host entry received */ + u16 _resvd; +}; + +/* + * fcpio_reset_cmpl: firmware -> host response + * + * use by firmware to respond to the host's reset request + */ +struct fcpio_reset_cmpl { + u16 vnic_id; +}; + +/* + * fcpio_flogi_reg_cmpl: firmware -> host response + * + * fc vnic only + * response to the fcpio_flogi_reg request + */ +struct fcpio_flogi_reg_cmpl { + u32 _resvd; +}; + +/* + * fcpio_echo_cmpl: firmware -> host response + * + * response to the fcpio_echo request + */ +struct fcpio_echo_cmpl { + u32 _resvd; +}; + +/* + * fcpio_lunmap_chng: firmware -> host notification + * + * scsi vnic only + * notifies the host that the lunmap tables have changed + */ +struct fcpio_lunmap_chng { + u32 _resvd; +}; + +/* + * fcpio_lunmap_req_cmpl: firmware -> host response + * + * scsi vnic only + * response for lunmap table request from the host + */ +struct fcpio_lunmap_req_cmpl { + u32 _resvd; +}; + +/* + * Basic structure for all fcpio structures that are sent from the firmware to + * the host. They are 64 bytes per structure. + */ +#define FCPIO_FW_REQ_LEN 64 /* expected length of fw requests */ +struct fcpio_fw_req { + struct fcpio_header hdr; + + union { + /* + * Defines space needed for request + */ + u8 buf[FCPIO_FW_REQ_LEN - sizeof(struct fcpio_header)]; + + /* + * Initiator firmware responses + */ + struct fcpio_icmnd_cmpl icmnd_cmpl; + struct fcpio_itmf_cmpl itmf_cmpl; + + /* + * Target firmware new requests + */ + struct fcpio_tcmnd_16 tcmnd_16; + struct fcpio_tcmnd_32 tcmnd_32; + + /* + * Target firmware responses + */ + struct fcpio_tdrsp_cmpl tdrsp_cmpl; + struct fcpio_ttmf ttmf; + struct fcpio_tabort_cmpl tabort_cmpl; + + /* + * Firmware response to work received + */ + struct fcpio_ack ack; + + /* + * Misc requests + */ + struct fcpio_reset_cmpl reset_cmpl; + struct fcpio_flogi_reg_cmpl flogi_reg_cmpl; + struct fcpio_echo_cmpl echo_cmpl; + struct fcpio_lunmap_chng lunmap_chng; + struct fcpio_lunmap_req_cmpl lunmap_req_cmpl; + } u; +}; + +/* + * Access routines to encode and decode the color bit, which is the most + * significant bit of the MSB of the structure + */ +static inline void fcpio_color_enc(struct fcpio_fw_req *fw_req, u8 color) +{ + u8 *c = ((u8 *) fw_req) + sizeof(struct fcpio_fw_req) - 1; + + if (color) + *c |= 0x80; + else + *c &= ~0x80; +} + +static inline void fcpio_color_dec(struct fcpio_fw_req *fw_req, u8 *color) +{ + u8 *c = ((u8 *) fw_req) + sizeof(struct fcpio_fw_req) - 1; + + *color = *c >> 7; + + /* + * Make sure color bit is read from desc *before* other fields + * are read from desc. Hardware guarantees color bit is last + * bit (byte) written. Adding the rmb() prevents the compiler + * and/or CPU from reordering the reads which would potentially + * result in reading stale values. + */ + + rmb(); + +} + +/* + * Lunmap table entry for scsi vnics + */ +#define FCPIO_LUNMAP_TABLE_SIZE 256 +#define FCPIO_FLAGS_LUNMAP_VALID 0x80 +#define FCPIO_FLAGS_BOOT 0x01 +struct fcpio_lunmap_entry { + u8 bus; + u8 target; + u8 lun; + u8 path_cnt; + u16 flags; + u16 update_cnt; +}; + +struct fcpio_lunmap_tbl { + u32 update_cnt; + struct fcpio_lunmap_entry lunmaps[FCPIO_LUNMAP_TABLE_SIZE]; +}; + +#endif /* _FCPIO_H_ */ diff --git a/drivers/scsi/fnic/fnic.h b/drivers/scsi/fnic/fnic.h new file mode 100644 index 000000000000..e4c0a3d7d87b --- /dev/null +++ b/drivers/scsi/fnic/fnic.h @@ -0,0 +1,265 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _FNIC_H_ +#define _FNIC_H_ + +#include +#include +#include +#include +#include "fnic_io.h" +#include "fnic_res.h" +#include "vnic_dev.h" +#include "vnic_wq.h" +#include "vnic_rq.h" +#include "vnic_cq.h" +#include "vnic_wq_copy.h" +#include "vnic_intr.h" +#include "vnic_stats.h" +#include "vnic_scsi.h" + +#define DRV_NAME "fnic" +#define DRV_DESCRIPTION "Cisco FCoE HBA Driver" +#define DRV_VERSION "1.0.0.1121" +#define PFX DRV_NAME ": " +#define DFX DRV_NAME "%d: " + +#define DESC_CLEAN_LOW_WATERMARK 8 +#define FNIC_MAX_IO_REQ 2048 /* scsi_cmnd tag map entries */ +#define FNIC_IO_LOCKS 64 /* IO locks: power of 2 */ +#define FNIC_DFLT_QUEUE_DEPTH 32 +#define FNIC_STATS_RATE_LIMIT 4 /* limit rate at which stats are pulled up */ + +/* + * Tag bits used for special requests. + */ +#define BIT(nr) (1UL << (nr)) +#define FNIC_TAG_ABORT BIT(30) /* tag bit indicating abort */ +#define FNIC_TAG_DEV_RST BIT(29) /* indicates device reset */ +#define FNIC_TAG_MASK (BIT(24) - 1) /* mask for lookup */ +#define FNIC_NO_TAG -1 + +/* + * Usage of the scsi_cmnd scratchpad. + * These fields are locked by the hashed io_req_lock. + */ +#define CMD_SP(Cmnd) ((Cmnd)->SCp.ptr) +#define CMD_STATE(Cmnd) ((Cmnd)->SCp.phase) +#define CMD_ABTS_STATUS(Cmnd) ((Cmnd)->SCp.Message) +#define CMD_LR_STATUS(Cmnd) ((Cmnd)->SCp.have_data_in) +#define CMD_TAG(Cmnd) ((Cmnd)->SCp.sent_command) + +#define FCPIO_INVALID_CODE 0x100 /* hdr_status value unused by firmware */ + +#define FNIC_LUN_RESET_TIMEOUT 10000 /* mSec */ +#define FNIC_HOST_RESET_TIMEOUT 10000 /* mSec */ +#define FNIC_RMDEVICE_TIMEOUT 1000 /* mSec */ +#define FNIC_HOST_RESET_SETTLE_TIME 30 /* Sec */ + +#define FNIC_MAX_FCP_TARGET 256 + +extern unsigned int fnic_log_level; + +#define FNIC_MAIN_LOGGING 0x01 +#define FNIC_FCS_LOGGING 0x02 +#define FNIC_SCSI_LOGGING 0x04 +#define FNIC_ISR_LOGGING 0x08 + +#define FNIC_CHECK_LOGGING(LEVEL, CMD) \ +do { \ + if (unlikely(fnic_log_level & LEVEL)) \ + do { \ + CMD; \ + } while (0); \ +} while (0) + +#define FNIC_MAIN_DBG(kern_level, host, fmt, args...) \ + FNIC_CHECK_LOGGING(FNIC_MAIN_LOGGING, \ + shost_printk(kern_level, host, fmt, ##args);) + +#define FNIC_FCS_DBG(kern_level, host, fmt, args...) \ + FNIC_CHECK_LOGGING(FNIC_FCS_LOGGING, \ + shost_printk(kern_level, host, fmt, ##args);) + +#define FNIC_SCSI_DBG(kern_level, host, fmt, args...) \ + FNIC_CHECK_LOGGING(FNIC_SCSI_LOGGING, \ + shost_printk(kern_level, host, fmt, ##args);) + +#define FNIC_ISR_DBG(kern_level, host, fmt, args...) \ + FNIC_CHECK_LOGGING(FNIC_ISR_LOGGING, \ + shost_printk(kern_level, host, fmt, ##args);) + +extern const char *fnic_state_str[]; + +enum fnic_intx_intr_index { + FNIC_INTX_WQ_RQ_COPYWQ, + FNIC_INTX_ERR, + FNIC_INTX_NOTIFY, + FNIC_INTX_INTR_MAX, +}; + +enum fnic_msix_intr_index { + FNIC_MSIX_RQ, + FNIC_MSIX_WQ, + FNIC_MSIX_WQ_COPY, + FNIC_MSIX_ERR_NOTIFY, + FNIC_MSIX_INTR_MAX, +}; + +struct fnic_msix_entry { + int requested; + char devname[IFNAMSIZ]; + irqreturn_t (*isr)(int, void *); + void *devid; +}; + +enum fnic_state { + FNIC_IN_FC_MODE = 0, + FNIC_IN_FC_TRANS_ETH_MODE, + FNIC_IN_ETH_MODE, + FNIC_IN_ETH_TRANS_FC_MODE, +}; + +#define FNIC_WQ_COPY_MAX 1 +#define FNIC_WQ_MAX 1 +#define FNIC_RQ_MAX 1 +#define FNIC_CQ_MAX (FNIC_WQ_COPY_MAX + FNIC_WQ_MAX + FNIC_RQ_MAX) + +struct mempool; + +/* Per-instance private data structure */ +struct fnic { + struct fc_lport *lport; + struct vnic_dev_bar bar0; + + struct msix_entry msix_entry[FNIC_MSIX_INTR_MAX]; + struct fnic_msix_entry msix[FNIC_MSIX_INTR_MAX]; + + struct vnic_stats *stats; + unsigned long stats_time; /* time of stats update */ + struct vnic_nic_cfg *nic_cfg; + char name[IFNAMSIZ]; + struct timer_list notify_timer; /* used for MSI interrupts */ + + unsigned int err_intr_offset; + unsigned int link_intr_offset; + + unsigned int wq_count; + unsigned int cq_count; + + u32 fcoui_mode:1; /* use fcoui address*/ + u32 vlan_hw_insert:1; /* let hw insert the tag */ + u32 in_remove:1; /* fnic device in removal */ + u32 stop_rx_link_events:1; /* stop proc. rx frames, link events */ + + struct completion *remove_wait; /* device remove thread blocks */ + + struct fc_frame *flogi; + struct fc_frame *flogi_resp; + u16 flogi_oxid; + unsigned long s_id; + enum fnic_state state; + spinlock_t fnic_lock; + + u16 vlan_id; /* VLAN tag including priority */ + u8 mac_addr[ETH_ALEN]; + u8 dest_addr[ETH_ALEN]; + u8 data_src_addr[ETH_ALEN]; + u64 fcp_input_bytes; /* internal statistic */ + u64 fcp_output_bytes; /* internal statistic */ + u32 link_down_cnt; + int link_status; + + struct list_head list; + struct pci_dev *pdev; + struct vnic_fc_config config; + struct vnic_dev *vdev; + unsigned int raw_wq_count; + unsigned int wq_copy_count; + unsigned int rq_count; + int fw_ack_index[FNIC_WQ_COPY_MAX]; + unsigned short fw_ack_recd[FNIC_WQ_COPY_MAX]; + unsigned short wq_copy_desc_low[FNIC_WQ_COPY_MAX]; + unsigned int intr_count; + u32 __iomem *legacy_pba; + struct fnic_host_tag *tags; + mempool_t *io_req_pool; + mempool_t *io_sgl_pool[FNIC_SGL_NUM_CACHES]; + spinlock_t io_req_lock[FNIC_IO_LOCKS]; /* locks for scsi cmnds */ + + struct work_struct link_work; + struct work_struct frame_work; + struct sk_buff_head frame_queue; + + /* copy work queue cache line section */ + ____cacheline_aligned struct vnic_wq_copy wq_copy[FNIC_WQ_COPY_MAX]; + /* completion queue cache line section */ + ____cacheline_aligned struct vnic_cq cq[FNIC_CQ_MAX]; + + spinlock_t wq_copy_lock[FNIC_WQ_COPY_MAX]; + + /* work queue cache line section */ + ____cacheline_aligned struct vnic_wq wq[FNIC_WQ_MAX]; + spinlock_t wq_lock[FNIC_WQ_MAX]; + + /* receive queue cache line section */ + ____cacheline_aligned struct vnic_rq rq[FNIC_RQ_MAX]; + + /* interrupt resource cache line section */ + ____cacheline_aligned struct vnic_intr intr[FNIC_MSIX_INTR_MAX]; +}; + +extern struct workqueue_struct *fnic_event_queue; +extern struct device_attribute *fnic_attrs[]; + +void fnic_clear_intr_mode(struct fnic *fnic); +int fnic_set_intr_mode(struct fnic *fnic); +void fnic_free_intr(struct fnic *fnic); +int fnic_request_intr(struct fnic *fnic); + +int fnic_send(struct fc_lport *, struct fc_frame *); +void fnic_free_wq_buf(struct vnic_wq *wq, struct vnic_wq_buf *buf); +void fnic_handle_frame(struct work_struct *work); +void fnic_handle_link(struct work_struct *work); +int fnic_rq_cmpl_handler(struct fnic *fnic, int); +int fnic_alloc_rq_frame(struct vnic_rq *rq); +void fnic_free_rq_buf(struct vnic_rq *rq, struct vnic_rq_buf *buf); +int fnic_send_frame(struct fnic *fnic, struct fc_frame *fp); + +int fnic_queuecommand(struct scsi_cmnd *, void (*done)(struct scsi_cmnd *)); +int fnic_abort_cmd(struct scsi_cmnd *); +int fnic_device_reset(struct scsi_cmnd *); +int fnic_host_reset(struct scsi_cmnd *); +int fnic_reset(struct Scsi_Host *); +void fnic_scsi_cleanup(struct fc_lport *); +void fnic_scsi_abort_io(struct fc_lport *); +void fnic_empty_scsi_cleanup(struct fc_lport *); +void fnic_exch_mgr_reset(struct fc_lport *, u32, u32); +int fnic_wq_copy_cmpl_handler(struct fnic *fnic, int); +int fnic_wq_cmpl_handler(struct fnic *fnic, int); +int fnic_flogi_reg_handler(struct fnic *fnic); +void fnic_wq_copy_cleanup_handler(struct vnic_wq_copy *wq, + struct fcpio_host_req *desc); +int fnic_fw_reset_handler(struct fnic *fnic); +void fnic_terminate_rport_io(struct fc_rport *); +const char *fnic_state_to_str(unsigned int state); + +void fnic_log_q_error(struct fnic *fnic); +void fnic_handle_link_event(struct fnic *fnic); + +#endif /* _FNIC_H_ */ diff --git a/drivers/scsi/fnic/fnic_attrs.c b/drivers/scsi/fnic/fnic_attrs.c new file mode 100644 index 000000000000..aea0c3becfd4 --- /dev/null +++ b/drivers/scsi/fnic/fnic_attrs.c @@ -0,0 +1,56 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#include +#include +#include +#include "fnic.h" + +static ssize_t fnic_show_state(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct fc_lport *lp = shost_priv(class_to_shost(dev)); + struct fnic *fnic = lport_priv(lp); + + return snprintf(buf, PAGE_SIZE, "%s\n", fnic_state_str[fnic->state]); +} + +static ssize_t fnic_show_drv_version(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%s\n", DRV_VERSION); +} + +static ssize_t fnic_show_link_state(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct fc_lport *lp = shost_priv(class_to_shost(dev)); + + return snprintf(buf, PAGE_SIZE, "%s\n", (lp->link_up) + ? "Link Up" : "Link Down"); +} + +static DEVICE_ATTR(fnic_state, S_IRUGO, fnic_show_state, NULL); +static DEVICE_ATTR(drv_version, S_IRUGO, fnic_show_drv_version, NULL); +static DEVICE_ATTR(link_state, S_IRUGO, fnic_show_link_state, NULL); + +struct device_attribute *fnic_attrs[] = { + &dev_attr_fnic_state, + &dev_attr_drv_version, + &dev_attr_link_state, + NULL, +}; diff --git a/drivers/scsi/fnic/fnic_fcs.c b/drivers/scsi/fnic/fnic_fcs.c new file mode 100644 index 000000000000..07e6eedb83ce --- /dev/null +++ b/drivers/scsi/fnic/fnic_fcs.c @@ -0,0 +1,742 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "fnic_io.h" +#include "fnic.h" +#include "cq_enet_desc.h" +#include "cq_exch_desc.h" + +struct workqueue_struct *fnic_event_queue; + +void fnic_handle_link(struct work_struct *work) +{ + struct fnic *fnic = container_of(work, struct fnic, link_work); + unsigned long flags; + int old_link_status; + u32 old_link_down_cnt; + + spin_lock_irqsave(&fnic->fnic_lock, flags); + + if (fnic->stop_rx_link_events) { + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + return; + } + + old_link_down_cnt = fnic->link_down_cnt; + old_link_status = fnic->link_status; + fnic->link_status = vnic_dev_link_status(fnic->vdev); + fnic->link_down_cnt = vnic_dev_link_down_cnt(fnic->vdev); + + if (old_link_status == fnic->link_status) { + if (!fnic->link_status) + /* DOWN -> DOWN */ + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + else { + if (old_link_down_cnt != fnic->link_down_cnt) { + /* UP -> DOWN -> UP */ + fnic->lport->host_stats.link_failure_count++; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host, + "link down\n"); + fc_linkdown(fnic->lport); + FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host, + "link up\n"); + fc_linkup(fnic->lport); + } else + /* UP -> UP */ + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + } + } else if (fnic->link_status) { + /* DOWN -> UP */ + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host, "link up\n"); + fc_linkup(fnic->lport); + } else { + /* UP -> DOWN */ + fnic->lport->host_stats.link_failure_count++; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host, "link down\n"); + fc_linkdown(fnic->lport); + } + +} + +/* + * This function passes incoming fabric frames to libFC + */ +void fnic_handle_frame(struct work_struct *work) +{ + struct fnic *fnic = container_of(work, struct fnic, frame_work); + struct fc_lport *lp = fnic->lport; + unsigned long flags; + struct sk_buff *skb; + struct fc_frame *fp; + + while ((skb = skb_dequeue(&fnic->frame_queue))) { + + spin_lock_irqsave(&fnic->fnic_lock, flags); + if (fnic->stop_rx_link_events) { + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + dev_kfree_skb(skb); + return; + } + fp = (struct fc_frame *)skb; + /* if Flogi resp frame, register the address */ + if (fr_flags(fp)) { + vnic_dev_add_addr(fnic->vdev, + fnic->data_src_addr); + fr_flags(fp) = 0; + } + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + + fc_exch_recv(lp, lp->emp, fp); + } + +} + +static inline void fnic_import_rq_fc_frame(struct sk_buff *skb, + u32 len, u8 sof, u8 eof) +{ + struct fc_frame *fp = (struct fc_frame *)skb; + + skb_trim(skb, len); + fr_eof(fp) = eof; + fr_sof(fp) = sof; +} + + +static inline int fnic_import_rq_eth_pkt(struct sk_buff *skb, u32 len) +{ + struct fc_frame *fp; + struct ethhdr *eh; + struct vlan_ethhdr *vh; + struct fcoe_hdr *fcoe_hdr; + struct fcoe_crc_eof *ft; + u32 transport_len = 0; + + eh = (struct ethhdr *)skb->data; + vh = (struct vlan_ethhdr *)skb->data; + if (vh->h_vlan_proto == htons(ETH_P_8021Q) && + vh->h_vlan_encapsulated_proto == htons(ETH_P_FCOE)) { + skb_pull(skb, sizeof(struct vlan_ethhdr)); + transport_len += sizeof(struct vlan_ethhdr); + } else if (eh->h_proto == htons(ETH_P_FCOE)) { + transport_len += sizeof(struct ethhdr); + skb_pull(skb, sizeof(struct ethhdr)); + } else + return -1; + + fcoe_hdr = (struct fcoe_hdr *)skb->data; + if (FC_FCOE_DECAPS_VER(fcoe_hdr) != FC_FCOE_VER) + return -1; + + fp = (struct fc_frame *)skb; + fc_frame_init(fp); + fr_sof(fp) = fcoe_hdr->fcoe_sof; + skb_pull(skb, sizeof(struct fcoe_hdr)); + transport_len += sizeof(struct fcoe_hdr); + + ft = (struct fcoe_crc_eof *)(skb->data + len - + transport_len - sizeof(*ft)); + fr_eof(fp) = ft->fcoe_eof; + skb_trim(skb, len - transport_len - sizeof(*ft)); + return 0; +} + +static inline int fnic_handle_flogi_resp(struct fnic *fnic, + struct fc_frame *fp) +{ + u8 mac[ETH_ALEN] = FC_FCOE_FLOGI_MAC; + struct ethhdr *eth_hdr; + struct fc_frame_header *fh; + int ret = 0; + unsigned long flags; + struct fc_frame *old_flogi_resp = NULL; + + fh = (struct fc_frame_header *)fr_hdr(fp); + + spin_lock_irqsave(&fnic->fnic_lock, flags); + + if (fnic->state == FNIC_IN_ETH_MODE) { + + /* + * Check if oxid matches on taking the lock. A new Flogi + * issued by libFC might have changed the fnic cached oxid + */ + if (fnic->flogi_oxid != ntohs(fh->fh_ox_id)) { + FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host, + "Flogi response oxid not" + " matching cached oxid, dropping frame" + "\n"); + ret = -1; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + dev_kfree_skb_irq(fp_skb(fp)); + goto handle_flogi_resp_end; + } + + /* Drop older cached flogi response frame, cache this frame */ + old_flogi_resp = fnic->flogi_resp; + fnic->flogi_resp = fp; + fnic->flogi_oxid = FC_XID_UNKNOWN; + + /* + * this frame is part of flogi get the src mac addr from this + * frame if the src mac is fcoui based then we mark the + * address mode flag to use fcoui base for dst mac addr + * otherwise we have to store the fcoe gateway addr + */ + eth_hdr = (struct ethhdr *)skb_mac_header(fp_skb(fp)); + memcpy(mac, eth_hdr->h_source, ETH_ALEN); + + if (ntoh24(mac) == FC_FCOE_OUI) + fnic->fcoui_mode = 1; + else { + fnic->fcoui_mode = 0; + memcpy(fnic->dest_addr, mac, ETH_ALEN); + } + + /* + * Except for Flogi frame, all outbound frames from us have the + * Eth Src address as FC_FCOE_OUI"our_sid". Flogi frame uses + * the vnic MAC address as the Eth Src address + */ + fc_fcoe_set_mac(fnic->data_src_addr, fh->fh_d_id); + + /* We get our s_id from the d_id of the flogi resp frame */ + fnic->s_id = ntoh24(fh->fh_d_id); + + /* Change state to reflect transition from Eth to FC mode */ + fnic->state = FNIC_IN_ETH_TRANS_FC_MODE; + + } else { + FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host, + "Unexpected fnic state %s while" + " processing flogi resp\n", + fnic_state_to_str(fnic->state)); + ret = -1; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + dev_kfree_skb_irq(fp_skb(fp)); + goto handle_flogi_resp_end; + } + + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + + /* Drop older cached frame */ + if (old_flogi_resp) + dev_kfree_skb_irq(fp_skb(old_flogi_resp)); + + /* + * send flogi reg request to firmware, this will put the fnic in + * in FC mode + */ + ret = fnic_flogi_reg_handler(fnic); + + if (ret < 0) { + int free_fp = 1; + spin_lock_irqsave(&fnic->fnic_lock, flags); + /* + * free the frame is some other thread is not + * pointing to it + */ + if (fnic->flogi_resp != fp) + free_fp = 0; + else + fnic->flogi_resp = NULL; + + if (fnic->state == FNIC_IN_ETH_TRANS_FC_MODE) + fnic->state = FNIC_IN_ETH_MODE; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + if (free_fp) + dev_kfree_skb_irq(fp_skb(fp)); + } + + handle_flogi_resp_end: + return ret; +} + +/* Returns 1 for a response that matches cached flogi oxid */ +static inline int is_matching_flogi_resp_frame(struct fnic *fnic, + struct fc_frame *fp) +{ + struct fc_frame_header *fh; + int ret = 0; + u32 f_ctl; + + fh = fc_frame_header_get(fp); + f_ctl = ntoh24(fh->fh_f_ctl); + + if (fnic->flogi_oxid == ntohs(fh->fh_ox_id) && + fh->fh_r_ctl == FC_RCTL_ELS_REP && + (f_ctl & (FC_FC_EX_CTX | FC_FC_SEQ_CTX)) == FC_FC_EX_CTX && + fh->fh_type == FC_TYPE_ELS) + ret = 1; + + return ret; +} + +static void fnic_rq_cmpl_frame_recv(struct vnic_rq *rq, struct cq_desc + *cq_desc, struct vnic_rq_buf *buf, + int skipped __attribute__((unused)), + void *opaque) +{ + struct fnic *fnic = vnic_dev_priv(rq->vdev); + struct sk_buff *skb; + struct fc_frame *fp; + unsigned int eth_hdrs_stripped; + u8 type, color, eop, sop, ingress_port, vlan_stripped; + u8 fcoe = 0, fcoe_sof, fcoe_eof; + u8 fcoe_fc_crc_ok = 1, fcoe_enc_error = 0; + u8 tcp_udp_csum_ok, udp, tcp, ipv4_csum_ok; + u8 ipv6, ipv4, ipv4_fragment, rss_type, csum_not_calc; + u8 fcs_ok = 1, packet_error = 0; + u16 q_number, completed_index, bytes_written = 0, vlan, checksum; + u32 rss_hash; + u16 exchange_id, tmpl; + u8 sof = 0; + u8 eof = 0; + u32 fcp_bytes_written = 0; + unsigned long flags; + + pci_unmap_single(fnic->pdev, buf->dma_addr, buf->len, + PCI_DMA_FROMDEVICE); + skb = buf->os_buf; + buf->os_buf = NULL; + + cq_desc_dec(cq_desc, &type, &color, &q_number, &completed_index); + if (type == CQ_DESC_TYPE_RQ_FCP) { + cq_fcp_rq_desc_dec((struct cq_fcp_rq_desc *)cq_desc, + &type, &color, &q_number, &completed_index, + &eop, &sop, &fcoe_fc_crc_ok, &exchange_id, + &tmpl, &fcp_bytes_written, &sof, &eof, + &ingress_port, &packet_error, + &fcoe_enc_error, &fcs_ok, &vlan_stripped, + &vlan); + eth_hdrs_stripped = 1; + + } else if (type == CQ_DESC_TYPE_RQ_ENET) { + cq_enet_rq_desc_dec((struct cq_enet_rq_desc *)cq_desc, + &type, &color, &q_number, &completed_index, + &ingress_port, &fcoe, &eop, &sop, + &rss_type, &csum_not_calc, &rss_hash, + &bytes_written, &packet_error, + &vlan_stripped, &vlan, &checksum, + &fcoe_sof, &fcoe_fc_crc_ok, + &fcoe_enc_error, &fcoe_eof, + &tcp_udp_csum_ok, &udp, &tcp, + &ipv4_csum_ok, &ipv6, &ipv4, + &ipv4_fragment, &fcs_ok); + eth_hdrs_stripped = 0; + + } else { + /* wrong CQ type*/ + shost_printk(KERN_ERR, fnic->lport->host, + "fnic rq_cmpl wrong cq type x%x\n", type); + goto drop; + } + + if (!fcs_ok || packet_error || !fcoe_fc_crc_ok || fcoe_enc_error) { + FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host, + "fnic rq_cmpl fcoe x%x fcsok x%x" + " pkterr x%x fcoe_fc_crc_ok x%x, fcoe_enc_err" + " x%x\n", + fcoe, fcs_ok, packet_error, + fcoe_fc_crc_ok, fcoe_enc_error); + goto drop; + } + + if (eth_hdrs_stripped) + fnic_import_rq_fc_frame(skb, fcp_bytes_written, sof, eof); + else if (fnic_import_rq_eth_pkt(skb, bytes_written)) + goto drop; + + fp = (struct fc_frame *)skb; + + /* + * If frame is an ELS response that matches the cached FLOGI OX_ID, + * and is accept, issue flogi_reg_request copy wq request to firmware + * to register the S_ID and determine whether FC_OUI mode or GW mode. + */ + if (is_matching_flogi_resp_frame(fnic, fp)) { + if (!eth_hdrs_stripped) { + if (fc_frame_payload_op(fp) == ELS_LS_ACC) { + fnic_handle_flogi_resp(fnic, fp); + return; + } + /* + * Recd. Flogi reject. No point registering + * with fw, but forward to libFC + */ + goto forward; + } + goto drop; + } + if (!eth_hdrs_stripped) + goto drop; + +forward: + spin_lock_irqsave(&fnic->fnic_lock, flags); + if (fnic->stop_rx_link_events) { + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + goto drop; + } + /* Use fr_flags to indicate whether succ. flogi resp or not */ + fr_flags(fp) = 0; + fr_dev(fp) = fnic->lport; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + + skb_queue_tail(&fnic->frame_queue, skb); + queue_work(fnic_event_queue, &fnic->frame_work); + + return; +drop: + dev_kfree_skb_irq(skb); +} + +static int fnic_rq_cmpl_handler_cont(struct vnic_dev *vdev, + struct cq_desc *cq_desc, u8 type, + u16 q_number, u16 completed_index, + void *opaque) +{ + struct fnic *fnic = vnic_dev_priv(vdev); + + vnic_rq_service(&fnic->rq[q_number], cq_desc, completed_index, + VNIC_RQ_RETURN_DESC, fnic_rq_cmpl_frame_recv, + NULL); + return 0; +} + +int fnic_rq_cmpl_handler(struct fnic *fnic, int rq_work_to_do) +{ + unsigned int tot_rq_work_done = 0, cur_work_done; + unsigned int i; + int err; + + for (i = 0; i < fnic->rq_count; i++) { + cur_work_done = vnic_cq_service(&fnic->cq[i], rq_work_to_do, + fnic_rq_cmpl_handler_cont, + NULL); + if (cur_work_done) { + err = vnic_rq_fill(&fnic->rq[i], fnic_alloc_rq_frame); + if (err) + shost_printk(KERN_ERR, fnic->lport->host, + "fnic_alloc_rq_frame cant alloc" + " frame\n"); + } + tot_rq_work_done += cur_work_done; + } + + return tot_rq_work_done; +} + +/* + * This function is called once at init time to allocate and fill RQ + * buffers. Subsequently, it is called in the interrupt context after RQ + * buffer processing to replenish the buffers in the RQ + */ +int fnic_alloc_rq_frame(struct vnic_rq *rq) +{ + struct fnic *fnic = vnic_dev_priv(rq->vdev); + struct sk_buff *skb; + u16 len; + dma_addr_t pa; + + len = FC_FRAME_HEADROOM + FC_MAX_FRAME + FC_FRAME_TAILROOM; + skb = dev_alloc_skb(len); + if (!skb) { + FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host, + "Unable to allocate RQ sk_buff\n"); + return -ENOMEM; + } + skb_reset_mac_header(skb); + skb_reset_transport_header(skb); + skb_reset_network_header(skb); + skb_put(skb, len); + pa = pci_map_single(fnic->pdev, skb->data, len, PCI_DMA_FROMDEVICE); + fnic_queue_rq_desc(rq, skb, pa, len); + return 0; +} + +void fnic_free_rq_buf(struct vnic_rq *rq, struct vnic_rq_buf *buf) +{ + struct fc_frame *fp = buf->os_buf; + struct fnic *fnic = vnic_dev_priv(rq->vdev); + + pci_unmap_single(fnic->pdev, buf->dma_addr, buf->len, + PCI_DMA_FROMDEVICE); + + dev_kfree_skb(fp_skb(fp)); + buf->os_buf = NULL; +} + +static inline int is_flogi_frame(struct fc_frame_header *fh) +{ + return fh->fh_r_ctl == FC_RCTL_ELS_REQ && *(u8 *)(fh + 1) == ELS_FLOGI; +} + +int fnic_send_frame(struct fnic *fnic, struct fc_frame *fp) +{ + struct vnic_wq *wq = &fnic->wq[0]; + struct sk_buff *skb; + dma_addr_t pa; + struct ethhdr *eth_hdr; + struct vlan_ethhdr *vlan_hdr; + struct fcoe_hdr *fcoe_hdr; + struct fc_frame_header *fh; + u32 tot_len, eth_hdr_len; + int ret = 0; + unsigned long flags; + + fh = fc_frame_header_get(fp); + skb = fp_skb(fp); + + if (!fnic->vlan_hw_insert) { + eth_hdr_len = sizeof(*vlan_hdr) + sizeof(*fcoe_hdr); + vlan_hdr = (struct vlan_ethhdr *)skb_push(skb, eth_hdr_len); + eth_hdr = (struct ethhdr *)vlan_hdr; + vlan_hdr->h_vlan_proto = htons(ETH_P_8021Q); + vlan_hdr->h_vlan_encapsulated_proto = htons(ETH_P_FCOE); + vlan_hdr->h_vlan_TCI = htons(fnic->vlan_id); + fcoe_hdr = (struct fcoe_hdr *)(vlan_hdr + 1); + } else { + eth_hdr_len = sizeof(*eth_hdr) + sizeof(*fcoe_hdr); + eth_hdr = (struct ethhdr *)skb_push(skb, eth_hdr_len); + eth_hdr->h_proto = htons(ETH_P_FCOE); + fcoe_hdr = (struct fcoe_hdr *)(eth_hdr + 1); + } + + if (is_flogi_frame(fh)) { + fc_fcoe_set_mac(eth_hdr->h_dest, fh->fh_d_id); + memcpy(eth_hdr->h_source, fnic->mac_addr, ETH_ALEN); + } else { + if (fnic->fcoui_mode) + fc_fcoe_set_mac(eth_hdr->h_dest, fh->fh_d_id); + else + memcpy(eth_hdr->h_dest, fnic->dest_addr, ETH_ALEN); + memcpy(eth_hdr->h_source, fnic->data_src_addr, ETH_ALEN); + } + + tot_len = skb->len; + BUG_ON(tot_len % 4); + + memset(fcoe_hdr, 0, sizeof(*fcoe_hdr)); + fcoe_hdr->fcoe_sof = fr_sof(fp); + if (FC_FCOE_VER) + FC_FCOE_ENCAPS_VER(fcoe_hdr, FC_FCOE_VER); + + pa = pci_map_single(fnic->pdev, eth_hdr, tot_len, PCI_DMA_TODEVICE); + + spin_lock_irqsave(&fnic->wq_lock[0], flags); + + if (!vnic_wq_desc_avail(wq)) { + pci_unmap_single(fnic->pdev, pa, + tot_len, PCI_DMA_TODEVICE); + ret = -1; + goto fnic_send_frame_end; + } + + fnic_queue_wq_desc(wq, skb, pa, tot_len, fr_eof(fp), + fnic->vlan_hw_insert, fnic->vlan_id, 1, 1, 1); +fnic_send_frame_end: + spin_unlock_irqrestore(&fnic->wq_lock[0], flags); + + if (ret) + dev_kfree_skb_any(fp_skb(fp)); + + return ret; +} + +/* + * fnic_send + * Routine to send a raw frame + */ +int fnic_send(struct fc_lport *lp, struct fc_frame *fp) +{ + struct fnic *fnic = lport_priv(lp); + struct fc_frame_header *fh; + int ret = 0; + enum fnic_state old_state; + unsigned long flags; + struct fc_frame *old_flogi = NULL; + struct fc_frame *old_flogi_resp = NULL; + + if (fnic->in_remove) { + dev_kfree_skb(fp_skb(fp)); + ret = -1; + goto fnic_send_end; + } + + fh = fc_frame_header_get(fp); + /* if not an Flogi frame, send it out, this is the common case */ + if (!is_flogi_frame(fh)) + return fnic_send_frame(fnic, fp); + + /* Flogi frame, now enter the state machine */ + + spin_lock_irqsave(&fnic->fnic_lock, flags); +again: + /* Get any old cached frames, free them after dropping lock */ + old_flogi = fnic->flogi; + fnic->flogi = NULL; + old_flogi_resp = fnic->flogi_resp; + fnic->flogi_resp = NULL; + + fnic->flogi_oxid = FC_XID_UNKNOWN; + + old_state = fnic->state; + switch (old_state) { + case FNIC_IN_FC_MODE: + case FNIC_IN_ETH_TRANS_FC_MODE: + default: + fnic->state = FNIC_IN_FC_TRANS_ETH_MODE; + vnic_dev_del_addr(fnic->vdev, fnic->data_src_addr); + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + + if (old_flogi) { + dev_kfree_skb(fp_skb(old_flogi)); + old_flogi = NULL; + } + if (old_flogi_resp) { + dev_kfree_skb(fp_skb(old_flogi_resp)); + old_flogi_resp = NULL; + } + + ret = fnic_fw_reset_handler(fnic); + + spin_lock_irqsave(&fnic->fnic_lock, flags); + if (fnic->state != FNIC_IN_FC_TRANS_ETH_MODE) + goto again; + if (ret) { + fnic->state = old_state; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + dev_kfree_skb(fp_skb(fp)); + goto fnic_send_end; + } + old_flogi = fnic->flogi; + fnic->flogi = fp; + fnic->flogi_oxid = ntohs(fh->fh_ox_id); + old_flogi_resp = fnic->flogi_resp; + fnic->flogi_resp = NULL; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + break; + + case FNIC_IN_FC_TRANS_ETH_MODE: + /* + * A reset is pending with the firmware. Store the flogi + * and its oxid. The transition out of this state happens + * only when Firmware completes the reset, either with + * success or failed. If success, transition to + * FNIC_IN_ETH_MODE, if fail, then transition to + * FNIC_IN_FC_MODE + */ + fnic->flogi = fp; + fnic->flogi_oxid = ntohs(fh->fh_ox_id); + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + break; + + case FNIC_IN_ETH_MODE: + /* + * The fw/hw is already in eth mode. Store the oxid, + * and send the flogi frame out. The transition out of this + * state happens only we receive flogi response from the + * network, and the oxid matches the cached oxid when the + * flogi frame was sent out. If they match, then we issue + * a flogi_reg request and transition to state + * FNIC_IN_ETH_TRANS_FC_MODE + */ + fnic->flogi_oxid = ntohs(fh->fh_ox_id); + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + ret = fnic_send_frame(fnic, fp); + break; + } + +fnic_send_end: + if (old_flogi) + dev_kfree_skb(fp_skb(old_flogi)); + if (old_flogi_resp) + dev_kfree_skb(fp_skb(old_flogi_resp)); + return ret; +} + +static void fnic_wq_complete_frame_send(struct vnic_wq *wq, + struct cq_desc *cq_desc, + struct vnic_wq_buf *buf, void *opaque) +{ + struct sk_buff *skb = buf->os_buf; + struct fc_frame *fp = (struct fc_frame *)skb; + struct fnic *fnic = vnic_dev_priv(wq->vdev); + + pci_unmap_single(fnic->pdev, buf->dma_addr, + buf->len, PCI_DMA_TODEVICE); + dev_kfree_skb_irq(fp_skb(fp)); + buf->os_buf = NULL; +} + +static int fnic_wq_cmpl_handler_cont(struct vnic_dev *vdev, + struct cq_desc *cq_desc, u8 type, + u16 q_number, u16 completed_index, + void *opaque) +{ + struct fnic *fnic = vnic_dev_priv(vdev); + unsigned long flags; + + spin_lock_irqsave(&fnic->wq_lock[q_number], flags); + vnic_wq_service(&fnic->wq[q_number], cq_desc, completed_index, + fnic_wq_complete_frame_send, NULL); + spin_unlock_irqrestore(&fnic->wq_lock[q_number], flags); + + return 0; +} + +int fnic_wq_cmpl_handler(struct fnic *fnic, int work_to_do) +{ + unsigned int wq_work_done = 0; + unsigned int i; + + for (i = 0; i < fnic->raw_wq_count; i++) { + wq_work_done += vnic_cq_service(&fnic->cq[fnic->rq_count+i], + work_to_do, + fnic_wq_cmpl_handler_cont, + NULL); + } + + return wq_work_done; +} + + +void fnic_free_wq_buf(struct vnic_wq *wq, struct vnic_wq_buf *buf) +{ + struct fc_frame *fp = buf->os_buf; + struct fnic *fnic = vnic_dev_priv(wq->vdev); + + pci_unmap_single(fnic->pdev, buf->dma_addr, + buf->len, PCI_DMA_TODEVICE); + + dev_kfree_skb(fp_skb(fp)); + buf->os_buf = NULL; +} diff --git a/drivers/scsi/fnic/fnic_io.h b/drivers/scsi/fnic/fnic_io.h new file mode 100644 index 000000000000..f0b896988cd5 --- /dev/null +++ b/drivers/scsi/fnic/fnic_io.h @@ -0,0 +1,67 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _FNIC_IO_H_ +#define _FNIC_IO_H_ + +#include + +#define FNIC_DFLT_SG_DESC_CNT 32 +#define FNIC_MAX_SG_DESC_CNT 1024 /* Maximum descriptors per sgl */ +#define FNIC_SG_DESC_ALIGN 16 /* Descriptor address alignment */ + +struct host_sg_desc { + __le64 addr; + __le32 len; + u32 _resvd; +}; + +struct fnic_dflt_sgl_list { + struct host_sg_desc sg_desc[FNIC_DFLT_SG_DESC_CNT]; +}; + +struct fnic_sgl_list { + struct host_sg_desc sg_desc[FNIC_MAX_SG_DESC_CNT]; +}; + +enum fnic_sgl_list_type { + FNIC_SGL_CACHE_DFLT = 0, /* cache with default size sgl */ + FNIC_SGL_CACHE_MAX, /* cache with max size sgl */ + FNIC_SGL_NUM_CACHES /* number of sgl caches */ +}; + +enum fnic_ioreq_state { + FNIC_IOREQ_CMD_PENDING = 0, + FNIC_IOREQ_ABTS_PENDING, + FNIC_IOREQ_ABTS_COMPLETE, + FNIC_IOREQ_CMD_COMPLETE, +}; + +struct fnic_io_req { + struct host_sg_desc *sgl_list; /* sgl list */ + void *sgl_list_alloc; /* sgl list address used for free */ + dma_addr_t sense_buf_pa; /* dma address for sense buffer*/ + dma_addr_t sgl_list_pa; /* dma address for sgl list */ + u16 sgl_cnt; + u8 sgl_type; /* device DMA descriptor list type */ + u8 io_completed:1; /* set to 1 when fw completes IO */ + u32 port_id; /* remote port DID */ + struct completion *abts_done; /* completion for abts */ + struct completion *dr_done; /* completion for device reset */ +}; + +#endif /* _FNIC_IO_H_ */ diff --git a/drivers/scsi/fnic/fnic_isr.c b/drivers/scsi/fnic/fnic_isr.c new file mode 100644 index 000000000000..2b3064828aea --- /dev/null +++ b/drivers/scsi/fnic/fnic_isr.c @@ -0,0 +1,332 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#include +#include +#include +#include +#include +#include +#include "vnic_dev.h" +#include "vnic_intr.h" +#include "vnic_stats.h" +#include "fnic_io.h" +#include "fnic.h" + +static irqreturn_t fnic_isr_legacy(int irq, void *data) +{ + struct fnic *fnic = data; + u32 pba; + unsigned long work_done = 0; + + pba = vnic_intr_legacy_pba(fnic->legacy_pba); + if (!pba) + return IRQ_NONE; + + if (pba & (1 << FNIC_INTX_NOTIFY)) { + vnic_intr_return_all_credits(&fnic->intr[FNIC_INTX_NOTIFY]); + fnic_handle_link_event(fnic); + } + + if (pba & (1 << FNIC_INTX_ERR)) { + vnic_intr_return_all_credits(&fnic->intr[FNIC_INTX_ERR]); + fnic_log_q_error(fnic); + } + + if (pba & (1 << FNIC_INTX_WQ_RQ_COPYWQ)) { + work_done += fnic_wq_copy_cmpl_handler(fnic, 8); + work_done += fnic_wq_cmpl_handler(fnic, 4); + work_done += fnic_rq_cmpl_handler(fnic, 4); + + vnic_intr_return_credits(&fnic->intr[FNIC_INTX_WQ_RQ_COPYWQ], + work_done, + 1 /* unmask intr */, + 1 /* reset intr timer */); + } + + return IRQ_HANDLED; +} + +static irqreturn_t fnic_isr_msi(int irq, void *data) +{ + struct fnic *fnic = data; + unsigned long work_done = 0; + + work_done += fnic_wq_copy_cmpl_handler(fnic, 8); + work_done += fnic_wq_cmpl_handler(fnic, 4); + work_done += fnic_rq_cmpl_handler(fnic, 4); + + vnic_intr_return_credits(&fnic->intr[0], + work_done, + 1 /* unmask intr */, + 1 /* reset intr timer */); + + return IRQ_HANDLED; +} + +static irqreturn_t fnic_isr_msix_rq(int irq, void *data) +{ + struct fnic *fnic = data; + unsigned long rq_work_done = 0; + + rq_work_done = fnic_rq_cmpl_handler(fnic, 4); + vnic_intr_return_credits(&fnic->intr[FNIC_MSIX_RQ], + rq_work_done, + 1 /* unmask intr */, + 1 /* reset intr timer */); + + return IRQ_HANDLED; +} + +static irqreturn_t fnic_isr_msix_wq(int irq, void *data) +{ + struct fnic *fnic = data; + unsigned long wq_work_done = 0; + + wq_work_done = fnic_wq_cmpl_handler(fnic, 4); + vnic_intr_return_credits(&fnic->intr[FNIC_MSIX_WQ], + wq_work_done, + 1 /* unmask intr */, + 1 /* reset intr timer */); + return IRQ_HANDLED; +} + +static irqreturn_t fnic_isr_msix_wq_copy(int irq, void *data) +{ + struct fnic *fnic = data; + unsigned long wq_copy_work_done = 0; + + wq_copy_work_done = fnic_wq_copy_cmpl_handler(fnic, 8); + vnic_intr_return_credits(&fnic->intr[FNIC_MSIX_WQ_COPY], + wq_copy_work_done, + 1 /* unmask intr */, + 1 /* reset intr timer */); + return IRQ_HANDLED; +} + +static irqreturn_t fnic_isr_msix_err_notify(int irq, void *data) +{ + struct fnic *fnic = data; + + vnic_intr_return_all_credits(&fnic->intr[FNIC_MSIX_ERR_NOTIFY]); + fnic_log_q_error(fnic); + fnic_handle_link_event(fnic); + + return IRQ_HANDLED; +} + +void fnic_free_intr(struct fnic *fnic) +{ + int i; + + switch (vnic_dev_get_intr_mode(fnic->vdev)) { + case VNIC_DEV_INTR_MODE_INTX: + case VNIC_DEV_INTR_MODE_MSI: + free_irq(fnic->pdev->irq, fnic); + break; + + case VNIC_DEV_INTR_MODE_MSIX: + for (i = 0; i < ARRAY_SIZE(fnic->msix); i++) + if (fnic->msix[i].requested) + free_irq(fnic->msix_entry[i].vector, + fnic->msix[i].devid); + break; + + default: + break; + } +} + +int fnic_request_intr(struct fnic *fnic) +{ + int err = 0; + int i; + + switch (vnic_dev_get_intr_mode(fnic->vdev)) { + + case VNIC_DEV_INTR_MODE_INTX: + err = request_irq(fnic->pdev->irq, &fnic_isr_legacy, + IRQF_SHARED, DRV_NAME, fnic); + break; + + case VNIC_DEV_INTR_MODE_MSI: + err = request_irq(fnic->pdev->irq, &fnic_isr_msi, + 0, fnic->name, fnic); + break; + + case VNIC_DEV_INTR_MODE_MSIX: + + sprintf(fnic->msix[FNIC_MSIX_RQ].devname, + "%.11s-fcs-rq", fnic->name); + fnic->msix[FNIC_MSIX_RQ].isr = fnic_isr_msix_rq; + fnic->msix[FNIC_MSIX_RQ].devid = fnic; + + sprintf(fnic->msix[FNIC_MSIX_WQ].devname, + "%.11s-fcs-wq", fnic->name); + fnic->msix[FNIC_MSIX_WQ].isr = fnic_isr_msix_wq; + fnic->msix[FNIC_MSIX_WQ].devid = fnic; + + sprintf(fnic->msix[FNIC_MSIX_WQ_COPY].devname, + "%.11s-scsi-wq", fnic->name); + fnic->msix[FNIC_MSIX_WQ_COPY].isr = fnic_isr_msix_wq_copy; + fnic->msix[FNIC_MSIX_WQ_COPY].devid = fnic; + + sprintf(fnic->msix[FNIC_MSIX_ERR_NOTIFY].devname, + "%.11s-err-notify", fnic->name); + fnic->msix[FNIC_MSIX_ERR_NOTIFY].isr = + fnic_isr_msix_err_notify; + fnic->msix[FNIC_MSIX_ERR_NOTIFY].devid = fnic; + + for (i = 0; i < ARRAY_SIZE(fnic->msix); i++) { + err = request_irq(fnic->msix_entry[i].vector, + fnic->msix[i].isr, 0, + fnic->msix[i].devname, + fnic->msix[i].devid); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "MSIX: request_irq" + " failed %d\n", err); + fnic_free_intr(fnic); + break; + } + fnic->msix[i].requested = 1; + } + break; + + default: + break; + } + + return err; +} + +int fnic_set_intr_mode(struct fnic *fnic) +{ + unsigned int n = ARRAY_SIZE(fnic->rq); + unsigned int m = ARRAY_SIZE(fnic->wq); + unsigned int o = ARRAY_SIZE(fnic->wq_copy); + unsigned int i; + + /* + * Set interrupt mode (INTx, MSI, MSI-X) depending + * system capabilities. + * + * Try MSI-X first + * + * We need n RQs, m WQs, o Copy WQs, n+m+o CQs, and n+m+o+1 INTRs + * (last INTR is used for WQ/RQ errors and notification area) + */ + + BUG_ON(ARRAY_SIZE(fnic->msix_entry) < n + m + o + 1); + for (i = 0; i < n + m + o + 1; i++) + fnic->msix_entry[i].entry = i; + + if (fnic->rq_count >= n && + fnic->raw_wq_count >= m && + fnic->wq_copy_count >= o && + fnic->cq_count >= n + m + o) { + if (!pci_enable_msix(fnic->pdev, fnic->msix_entry, + n + m + o + 1)) { + fnic->rq_count = n; + fnic->raw_wq_count = m; + fnic->wq_copy_count = o; + fnic->wq_count = m + o; + fnic->cq_count = n + m + o; + fnic->intr_count = n + m + o + 1; + fnic->err_intr_offset = FNIC_MSIX_ERR_NOTIFY; + + FNIC_ISR_DBG(KERN_DEBUG, fnic->lport->host, + "Using MSI-X Interrupts\n"); + vnic_dev_set_intr_mode(fnic->vdev, + VNIC_DEV_INTR_MODE_MSIX); + return 0; + } + } + + /* + * Next try MSI + * We need 1 RQ, 1 WQ, 1 WQ_COPY, 3 CQs, and 1 INTR + */ + if (fnic->rq_count >= 1 && + fnic->raw_wq_count >= 1 && + fnic->wq_copy_count >= 1 && + fnic->cq_count >= 3 && + fnic->intr_count >= 1 && + !pci_enable_msi(fnic->pdev)) { + + fnic->rq_count = 1; + fnic->raw_wq_count = 1; + fnic->wq_copy_count = 1; + fnic->wq_count = 2; + fnic->cq_count = 3; + fnic->intr_count = 1; + fnic->err_intr_offset = 0; + + FNIC_ISR_DBG(KERN_DEBUG, fnic->lport->host, + "Using MSI Interrupts\n"); + vnic_dev_set_intr_mode(fnic->vdev, VNIC_DEV_INTR_MODE_MSI); + + return 0; + } + + /* + * Next try INTx + * We need 1 RQ, 1 WQ, 1 WQ_COPY, 3 CQs, and 3 INTRs + * 1 INTR is used for all 3 queues, 1 INTR for queue errors + * 1 INTR for notification area + */ + + if (fnic->rq_count >= 1 && + fnic->raw_wq_count >= 1 && + fnic->wq_copy_count >= 1 && + fnic->cq_count >= 3 && + fnic->intr_count >= 3) { + + fnic->rq_count = 1; + fnic->raw_wq_count = 1; + fnic->wq_copy_count = 1; + fnic->cq_count = 3; + fnic->intr_count = 3; + + FNIC_ISR_DBG(KERN_DEBUG, fnic->lport->host, + "Using Legacy Interrupts\n"); + vnic_dev_set_intr_mode(fnic->vdev, VNIC_DEV_INTR_MODE_INTX); + + return 0; + } + + vnic_dev_set_intr_mode(fnic->vdev, VNIC_DEV_INTR_MODE_UNKNOWN); + + return -EINVAL; +} + +void fnic_clear_intr_mode(struct fnic *fnic) +{ + switch (vnic_dev_get_intr_mode(fnic->vdev)) { + case VNIC_DEV_INTR_MODE_MSIX: + pci_disable_msix(fnic->pdev); + break; + case VNIC_DEV_INTR_MODE_MSI: + pci_disable_msi(fnic->pdev); + break; + default: + break; + } + + vnic_dev_set_intr_mode(fnic->vdev, VNIC_DEV_INTR_MODE_INTX); +} + diff --git a/drivers/scsi/fnic/fnic_main.c b/drivers/scsi/fnic/fnic_main.c new file mode 100644 index 000000000000..32ef6b87d895 --- /dev/null +++ b/drivers/scsi/fnic/fnic_main.c @@ -0,0 +1,942 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "vnic_dev.h" +#include "vnic_intr.h" +#include "vnic_stats.h" +#include "fnic_io.h" +#include "fnic.h" + +#define PCI_DEVICE_ID_CISCO_FNIC 0x0045 + +/* Timer to poll notification area for events. Used for MSI interrupts */ +#define FNIC_NOTIFY_TIMER_PERIOD (2 * HZ) + +static struct kmem_cache *fnic_sgl_cache[FNIC_SGL_NUM_CACHES]; +static struct kmem_cache *fnic_io_req_cache; +LIST_HEAD(fnic_list); +DEFINE_SPINLOCK(fnic_list_lock); + +/* Supported devices by fnic module */ +static struct pci_device_id fnic_id_table[] = { + { PCI_DEVICE(PCI_VENDOR_ID_CISCO, PCI_DEVICE_ID_CISCO_FNIC) }, + { 0, } +}; + +MODULE_DESCRIPTION(DRV_DESCRIPTION); +MODULE_AUTHOR("Abhijeet Joglekar , " + "Joseph R. Eykholt "); +MODULE_LICENSE("GPL v2"); +MODULE_VERSION(DRV_VERSION); +MODULE_DEVICE_TABLE(pci, fnic_id_table); + +unsigned int fnic_log_level; +module_param(fnic_log_level, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(fnic_log_level, "bit mask of fnic logging levels"); + + +static struct libfc_function_template fnic_transport_template = { + .frame_send = fnic_send, + .fcp_abort_io = fnic_empty_scsi_cleanup, + .fcp_cleanup = fnic_empty_scsi_cleanup, + .exch_mgr_reset = fnic_exch_mgr_reset +}; + +static int fnic_slave_alloc(struct scsi_device *sdev) +{ + struct fc_rport *rport = starget_to_rport(scsi_target(sdev)); + struct fc_lport *lp = shost_priv(sdev->host); + struct fnic *fnic = lport_priv(lp); + + sdev->tagged_supported = 1; + + if (!rport || fc_remote_port_chkready(rport)) + return -ENXIO; + + scsi_activate_tcq(sdev, FNIC_DFLT_QUEUE_DEPTH); + rport->dev_loss_tmo = fnic->config.port_down_timeout / 1000; + + return 0; +} + +static struct scsi_host_template fnic_host_template = { + .module = THIS_MODULE, + .name = DRV_NAME, + .queuecommand = fnic_queuecommand, + .eh_abort_handler = fnic_abort_cmd, + .eh_device_reset_handler = fnic_device_reset, + .eh_host_reset_handler = fnic_host_reset, + .slave_alloc = fnic_slave_alloc, + .change_queue_depth = fc_change_queue_depth, + .change_queue_type = fc_change_queue_type, + .this_id = -1, + .cmd_per_lun = 3, + .can_queue = FNIC_MAX_IO_REQ, + .use_clustering = ENABLE_CLUSTERING, + .sg_tablesize = FNIC_MAX_SG_DESC_CNT, + .max_sectors = 0xffff, + .shost_attrs = fnic_attrs, +}; + +static void fnic_get_host_speed(struct Scsi_Host *shost); +static struct scsi_transport_template *fnic_fc_transport; +static struct fc_host_statistics *fnic_get_stats(struct Scsi_Host *); + +static struct fc_function_template fnic_fc_functions = { + + .show_host_node_name = 1, + .show_host_port_name = 1, + .show_host_supported_classes = 1, + .show_host_supported_fc4s = 1, + .show_host_active_fc4s = 1, + .show_host_maxframe_size = 1, + .show_host_port_id = 1, + .show_host_supported_speeds = 1, + .get_host_speed = fnic_get_host_speed, + .show_host_speed = 1, + .show_host_port_type = 1, + .get_host_port_state = fc_get_host_port_state, + .show_host_port_state = 1, + .show_host_symbolic_name = 1, + .show_rport_maxframe_size = 1, + .show_rport_supported_classes = 1, + .show_host_fabric_name = 1, + .show_starget_node_name = 1, + .show_starget_port_name = 1, + .show_starget_port_id = 1, + .show_rport_dev_loss_tmo = 1, + .issue_fc_host_lip = fnic_reset, + .get_fc_host_stats = fnic_get_stats, + .dd_fcrport_size = sizeof(struct fc_rport_libfc_priv), + .terminate_rport_io = fnic_terminate_rport_io, +}; + +static void fnic_get_host_speed(struct Scsi_Host *shost) +{ + struct fc_lport *lp = shost_priv(shost); + struct fnic *fnic = lport_priv(lp); + u32 port_speed = vnic_dev_port_speed(fnic->vdev); + + /* Add in other values as they get defined in fw */ + switch (port_speed) { + case 10000: + fc_host_speed(shost) = FC_PORTSPEED_10GBIT; + break; + default: + fc_host_speed(shost) = FC_PORTSPEED_10GBIT; + break; + } +} + +static struct fc_host_statistics *fnic_get_stats(struct Scsi_Host *host) +{ + int ret; + struct fc_lport *lp = shost_priv(host); + struct fnic *fnic = lport_priv(lp); + struct fc_host_statistics *stats = &lp->host_stats; + struct vnic_stats *vs; + unsigned long flags; + + if (time_before(jiffies, fnic->stats_time + HZ / FNIC_STATS_RATE_LIMIT)) + return stats; + fnic->stats_time = jiffies; + + spin_lock_irqsave(&fnic->fnic_lock, flags); + ret = vnic_dev_stats_dump(fnic->vdev, &fnic->stats); + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + + if (ret) { + FNIC_MAIN_DBG(KERN_DEBUG, fnic->lport->host, + "fnic: Get vnic stats failed" + " 0x%x", ret); + return stats; + } + vs = fnic->stats; + stats->tx_frames = vs->tx.tx_unicast_frames_ok; + stats->tx_words = vs->tx.tx_unicast_bytes_ok / 4; + stats->rx_frames = vs->rx.rx_unicast_frames_ok; + stats->rx_words = vs->rx.rx_unicast_bytes_ok / 4; + stats->error_frames = vs->tx.tx_errors + vs->rx.rx_errors; + stats->dumped_frames = vs->tx.tx_drops + vs->rx.rx_drop; + stats->invalid_crc_count = vs->rx.rx_crc_errors; + stats->seconds_since_last_reset = (jiffies - lp->boot_time) / HZ; + stats->fcp_input_megabytes = div_u64(fnic->fcp_input_bytes, 1000000); + stats->fcp_output_megabytes = div_u64(fnic->fcp_output_bytes, 1000000); + + return stats; +} + +void fnic_log_q_error(struct fnic *fnic) +{ + unsigned int i; + u32 error_status; + + for (i = 0; i < fnic->raw_wq_count; i++) { + error_status = ioread32(&fnic->wq[i].ctrl->error_status); + if (error_status) + shost_printk(KERN_ERR, fnic->lport->host, + "WQ[%d] error_status" + " %d\n", i, error_status); + } + + for (i = 0; i < fnic->rq_count; i++) { + error_status = ioread32(&fnic->rq[i].ctrl->error_status); + if (error_status) + shost_printk(KERN_ERR, fnic->lport->host, + "RQ[%d] error_status" + " %d\n", i, error_status); + } + + for (i = 0; i < fnic->wq_copy_count; i++) { + error_status = ioread32(&fnic->wq_copy[i].ctrl->error_status); + if (error_status) + shost_printk(KERN_ERR, fnic->lport->host, + "CWQ[%d] error_status" + " %d\n", i, error_status); + } +} + +void fnic_handle_link_event(struct fnic *fnic) +{ + unsigned long flags; + + spin_lock_irqsave(&fnic->fnic_lock, flags); + if (fnic->stop_rx_link_events) { + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + return; + } + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + + queue_work(fnic_event_queue, &fnic->link_work); + +} + +static int fnic_notify_set(struct fnic *fnic) +{ + int err; + + switch (vnic_dev_get_intr_mode(fnic->vdev)) { + case VNIC_DEV_INTR_MODE_INTX: + err = vnic_dev_notify_set(fnic->vdev, FNIC_INTX_NOTIFY); + break; + case VNIC_DEV_INTR_MODE_MSI: + err = vnic_dev_notify_set(fnic->vdev, -1); + break; + case VNIC_DEV_INTR_MODE_MSIX: + err = vnic_dev_notify_set(fnic->vdev, FNIC_MSIX_ERR_NOTIFY); + break; + default: + shost_printk(KERN_ERR, fnic->lport->host, + "Interrupt mode should be set up" + " before devcmd notify set %d\n", + vnic_dev_get_intr_mode(fnic->vdev)); + err = -1; + break; + } + + return err; +} + +static void fnic_notify_timer(unsigned long data) +{ + struct fnic *fnic = (struct fnic *)data; + + fnic_handle_link_event(fnic); + mod_timer(&fnic->notify_timer, + round_jiffies(jiffies + FNIC_NOTIFY_TIMER_PERIOD)); +} + +static void fnic_notify_timer_start(struct fnic *fnic) +{ + switch (vnic_dev_get_intr_mode(fnic->vdev)) { + case VNIC_DEV_INTR_MODE_MSI: + /* + * Schedule first timeout immediately. The driver is + * initiatialized and ready to look for link up notification + */ + mod_timer(&fnic->notify_timer, jiffies); + break; + default: + /* Using intr for notification for INTx/MSI-X */ + break; + }; +} + +static int fnic_dev_wait(struct vnic_dev *vdev, + int (*start)(struct vnic_dev *, int), + int (*finished)(struct vnic_dev *, int *), + int arg) +{ + unsigned long time; + int done; + int err; + + err = start(vdev, arg); + if (err) + return err; + + /* Wait for func to complete...2 seconds max */ + time = jiffies + (HZ * 2); + do { + err = finished(vdev, &done); + if (err) + return err; + if (done) + return 0; + schedule_timeout_uninterruptible(HZ / 10); + } while (time_after(time, jiffies)); + + return -ETIMEDOUT; +} + +static int fnic_cleanup(struct fnic *fnic) +{ + unsigned int i; + int err; + unsigned long flags; + struct fc_frame *flogi = NULL; + struct fc_frame *flogi_resp = NULL; + + vnic_dev_disable(fnic->vdev); + for (i = 0; i < fnic->intr_count; i++) + vnic_intr_mask(&fnic->intr[i]); + + for (i = 0; i < fnic->rq_count; i++) { + err = vnic_rq_disable(&fnic->rq[i]); + if (err) + return err; + } + for (i = 0; i < fnic->raw_wq_count; i++) { + err = vnic_wq_disable(&fnic->wq[i]); + if (err) + return err; + } + for (i = 0; i < fnic->wq_copy_count; i++) { + err = vnic_wq_copy_disable(&fnic->wq_copy[i]); + if (err) + return err; + } + + /* Clean up completed IOs and FCS frames */ + fnic_wq_copy_cmpl_handler(fnic, -1); + fnic_wq_cmpl_handler(fnic, -1); + fnic_rq_cmpl_handler(fnic, -1); + + /* Clean up the IOs and FCS frames that have not completed */ + for (i = 0; i < fnic->raw_wq_count; i++) + vnic_wq_clean(&fnic->wq[i], fnic_free_wq_buf); + for (i = 0; i < fnic->rq_count; i++) + vnic_rq_clean(&fnic->rq[i], fnic_free_rq_buf); + for (i = 0; i < fnic->wq_copy_count; i++) + vnic_wq_copy_clean(&fnic->wq_copy[i], + fnic_wq_copy_cleanup_handler); + + for (i = 0; i < fnic->cq_count; i++) + vnic_cq_clean(&fnic->cq[i]); + for (i = 0; i < fnic->intr_count; i++) + vnic_intr_clean(&fnic->intr[i]); + + /* + * Remove cached flogi and flogi resp frames if any + * These frames are not in any queue, and therefore queue + * cleanup does not clean them. So clean them explicitly + */ + spin_lock_irqsave(&fnic->fnic_lock, flags); + flogi = fnic->flogi; + fnic->flogi = NULL; + flogi_resp = fnic->flogi_resp; + fnic->flogi_resp = NULL; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + + if (flogi) + dev_kfree_skb(fp_skb(flogi)); + + if (flogi_resp) + dev_kfree_skb(fp_skb(flogi_resp)); + + mempool_destroy(fnic->io_req_pool); + for (i = 0; i < FNIC_SGL_NUM_CACHES; i++) + mempool_destroy(fnic->io_sgl_pool[i]); + + return 0; +} + +static void fnic_iounmap(struct fnic *fnic) +{ + if (fnic->bar0.vaddr) + iounmap(fnic->bar0.vaddr); +} + +/* + * Allocate element for mempools requiring GFP_DMA flag. + * Otherwise, checks in kmem_flagcheck() hit BUG_ON(). + */ +static void *fnic_alloc_slab_dma(gfp_t gfp_mask, void *pool_data) +{ + struct kmem_cache *mem = pool_data; + + return kmem_cache_alloc(mem, gfp_mask | GFP_ATOMIC | GFP_DMA); +} + +static int __devinit fnic_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct Scsi_Host *host; + struct fc_lport *lp; + struct fnic *fnic; + mempool_t *pool; + int err; + int i; + unsigned long flags; + + /* + * Allocate SCSI Host and set up association between host, + * local port, and fnic + */ + host = scsi_host_alloc(&fnic_host_template, + sizeof(struct fc_lport) + sizeof(struct fnic)); + if (!host) { + printk(KERN_ERR PFX "Unable to alloc SCSI host\n"); + err = -ENOMEM; + goto err_out; + } + lp = shost_priv(host); + lp->host = host; + fnic = lport_priv(lp); + fnic->lport = lp; + + snprintf(fnic->name, sizeof(fnic->name) - 1, "%s%d", DRV_NAME, + host->host_no); + + host->transportt = fnic_fc_transport; + + err = scsi_init_shared_tag_map(host, FNIC_MAX_IO_REQ); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "Unable to alloc shared tag map\n"); + goto err_out_free_hba; + } + + /* Setup PCI resources */ + pci_set_drvdata(pdev, fnic); + + fnic->pdev = pdev; + + err = pci_enable_device(pdev); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "Cannot enable PCI device, aborting.\n"); + goto err_out_free_hba; + } + + err = pci_request_regions(pdev, DRV_NAME); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "Cannot enable PCI resources, aborting\n"); + goto err_out_disable_device; + } + + pci_set_master(pdev); + + /* Query PCI controller on system for DMA addressing + * limitation for the device. Try 40-bit first, and + * fail to 32-bit. + */ + err = pci_set_dma_mask(pdev, DMA_40BIT_MASK); + if (err) { + err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "No usable DMA configuration " + "aborting\n"); + goto err_out_release_regions; + } + err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "Unable to obtain 32-bit DMA " + "for consistent allocations, aborting.\n"); + goto err_out_release_regions; + } + } else { + err = pci_set_consistent_dma_mask(pdev, DMA_40BIT_MASK); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "Unable to obtain 40-bit DMA " + "for consistent allocations, aborting.\n"); + goto err_out_release_regions; + } + } + + /* Map vNIC resources from BAR0 */ + if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { + shost_printk(KERN_ERR, fnic->lport->host, + "BAR0 not memory-map'able, aborting.\n"); + err = -ENODEV; + goto err_out_release_regions; + } + + fnic->bar0.vaddr = pci_iomap(pdev, 0, 0); + fnic->bar0.bus_addr = pci_resource_start(pdev, 0); + fnic->bar0.len = pci_resource_len(pdev, 0); + + if (!fnic->bar0.vaddr) { + shost_printk(KERN_ERR, fnic->lport->host, + "Cannot memory-map BAR0 res hdr, " + "aborting.\n"); + err = -ENODEV; + goto err_out_release_regions; + } + + fnic->vdev = vnic_dev_register(NULL, fnic, pdev, &fnic->bar0); + if (!fnic->vdev) { + shost_printk(KERN_ERR, fnic->lport->host, + "vNIC registration failed, " + "aborting.\n"); + err = -ENODEV; + goto err_out_iounmap; + } + + err = fnic_dev_wait(fnic->vdev, vnic_dev_open, + vnic_dev_open_done, 0); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "vNIC dev open failed, aborting.\n"); + goto err_out_vnic_unregister; + } + + err = vnic_dev_init(fnic->vdev, 0); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "vNIC dev init failed, aborting.\n"); + goto err_out_dev_close; + } + + err = vnic_dev_mac_addr(fnic->vdev, fnic->mac_addr); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "vNIC get MAC addr failed \n"); + goto err_out_dev_close; + } + + /* Get vNIC configuration */ + err = fnic_get_vnic_config(fnic); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "Get vNIC configuration failed, " + "aborting.\n"); + goto err_out_dev_close; + } + host->max_lun = fnic->config.luns_per_tgt; + host->max_id = FNIC_MAX_FCP_TARGET; + + fnic_get_res_counts(fnic); + + err = fnic_set_intr_mode(fnic); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "Failed to set intr mode, " + "aborting.\n"); + goto err_out_dev_close; + } + + err = fnic_request_intr(fnic); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "Unable to request irq.\n"); + goto err_out_clear_intr; + } + + err = fnic_alloc_vnic_resources(fnic); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "Failed to alloc vNIC resources, " + "aborting.\n"); + goto err_out_free_intr; + } + + + /* initialize all fnic locks */ + spin_lock_init(&fnic->fnic_lock); + + for (i = 0; i < FNIC_WQ_MAX; i++) + spin_lock_init(&fnic->wq_lock[i]); + + for (i = 0; i < FNIC_WQ_COPY_MAX; i++) { + spin_lock_init(&fnic->wq_copy_lock[i]); + fnic->wq_copy_desc_low[i] = DESC_CLEAN_LOW_WATERMARK; + fnic->fw_ack_recd[i] = 0; + fnic->fw_ack_index[i] = -1; + } + + for (i = 0; i < FNIC_IO_LOCKS; i++) + spin_lock_init(&fnic->io_req_lock[i]); + + fnic->io_req_pool = mempool_create_slab_pool(2, fnic_io_req_cache); + if (!fnic->io_req_pool) + goto err_out_free_resources; + + pool = mempool_create(2, fnic_alloc_slab_dma, mempool_free_slab, + fnic_sgl_cache[FNIC_SGL_CACHE_DFLT]); + if (!pool) + goto err_out_free_ioreq_pool; + fnic->io_sgl_pool[FNIC_SGL_CACHE_DFLT] = pool; + + pool = mempool_create(2, fnic_alloc_slab_dma, mempool_free_slab, + fnic_sgl_cache[FNIC_SGL_CACHE_MAX]); + if (!pool) + goto err_out_free_dflt_pool; + fnic->io_sgl_pool[FNIC_SGL_CACHE_MAX] = pool; + + /* setup vlan config, hw inserts vlan header */ + fnic->vlan_hw_insert = 1; + fnic->vlan_id = 0; + + fnic->flogi_oxid = FC_XID_UNKNOWN; + fnic->flogi = NULL; + fnic->flogi_resp = NULL; + fnic->state = FNIC_IN_FC_MODE; + + /* Enable hardware stripping of vlan header on ingress */ + fnic_set_nic_config(fnic, 0, 0, 0, 0, 0, 0, 1); + + /* Setup notification buffer area */ + err = fnic_notify_set(fnic); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "Failed to alloc notify buffer, aborting.\n"); + goto err_out_free_max_pool; + } + + /* Setup notify timer when using MSI interrupts */ + if (vnic_dev_get_intr_mode(fnic->vdev) == VNIC_DEV_INTR_MODE_MSI) + setup_timer(&fnic->notify_timer, + fnic_notify_timer, (unsigned long)fnic); + + /* allocate RQ buffers and post them to RQ*/ + for (i = 0; i < fnic->rq_count; i++) { + err = vnic_rq_fill(&fnic->rq[i], fnic_alloc_rq_frame); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "fnic_alloc_rq_frame can't alloc " + "frame\n"); + goto err_out_free_rq_buf; + } + } + + /* + * Initialization done with PCI system, hardware, firmware. + * Add host to SCSI + */ + err = scsi_add_host(lp->host, &pdev->dev); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "fnic: scsi_add_host failed...exiting\n"); + goto err_out_free_rq_buf; + } + + /* Start local port initiatialization */ + + lp->link_up = 0; + lp->tt = fnic_transport_template; + + lp->emp = fc_exch_mgr_alloc(lp, FC_CLASS_3, + FCPIO_HOST_EXCH_RANGE_START, + FCPIO_HOST_EXCH_RANGE_END); + if (!lp->emp) { + err = -ENOMEM; + goto err_out_remove_scsi_host; + } + + lp->max_retry_count = fnic->config.flogi_retries; + lp->service_params = (FCP_SPPF_INIT_FCN | FCP_SPPF_RD_XRDY_DIS | + FCP_SPPF_CONF_COMPL); + if (fnic->config.flags & VFCF_FCP_SEQ_LVL_ERR) + lp->service_params |= FCP_SPPF_RETRY; + + lp->boot_time = jiffies; + lp->e_d_tov = fnic->config.ed_tov; + lp->r_a_tov = fnic->config.ra_tov; + lp->link_supported_speeds = FC_PORTSPEED_10GBIT; + fc_set_wwnn(lp, fnic->config.node_wwn); + fc_set_wwpn(lp, fnic->config.port_wwn); + + fc_exch_init(lp); + fc_lport_init(lp); + fc_elsct_init(lp); + fc_rport_init(lp); + fc_disc_init(lp); + + fc_lport_config(lp); + + if (fc_set_mfs(lp, fnic->config.maxdatafieldsize + + sizeof(struct fc_frame_header))) { + err = -EINVAL; + goto err_out_free_exch_mgr; + } + fc_host_maxframe_size(lp->host) = lp->mfs; + + sprintf(fc_host_symbolic_name(lp->host), + DRV_NAME " v" DRV_VERSION " over %s", fnic->name); + + spin_lock_irqsave(&fnic_list_lock, flags); + list_add_tail(&fnic->list, &fnic_list); + spin_unlock_irqrestore(&fnic_list_lock, flags); + + INIT_WORK(&fnic->link_work, fnic_handle_link); + INIT_WORK(&fnic->frame_work, fnic_handle_frame); + skb_queue_head_init(&fnic->frame_queue); + + /* Enable all queues */ + for (i = 0; i < fnic->raw_wq_count; i++) + vnic_wq_enable(&fnic->wq[i]); + for (i = 0; i < fnic->rq_count; i++) + vnic_rq_enable(&fnic->rq[i]); + for (i = 0; i < fnic->wq_copy_count; i++) + vnic_wq_copy_enable(&fnic->wq_copy[i]); + + fc_fabric_login(lp); + + vnic_dev_enable(fnic->vdev); + for (i = 0; i < fnic->intr_count; i++) + vnic_intr_unmask(&fnic->intr[i]); + + fnic_notify_timer_start(fnic); + + return 0; + +err_out_free_exch_mgr: + fc_exch_mgr_free(lp->emp); +err_out_remove_scsi_host: + fc_remove_host(fnic->lport->host); + scsi_remove_host(fnic->lport->host); +err_out_free_rq_buf: + for (i = 0; i < fnic->rq_count; i++) + vnic_rq_clean(&fnic->rq[i], fnic_free_rq_buf); + vnic_dev_notify_unset(fnic->vdev); +err_out_free_max_pool: + mempool_destroy(fnic->io_sgl_pool[FNIC_SGL_CACHE_MAX]); +err_out_free_dflt_pool: + mempool_destroy(fnic->io_sgl_pool[FNIC_SGL_CACHE_DFLT]); +err_out_free_ioreq_pool: + mempool_destroy(fnic->io_req_pool); +err_out_free_resources: + fnic_free_vnic_resources(fnic); +err_out_free_intr: + fnic_free_intr(fnic); +err_out_clear_intr: + fnic_clear_intr_mode(fnic); +err_out_dev_close: + vnic_dev_close(fnic->vdev); +err_out_vnic_unregister: + vnic_dev_unregister(fnic->vdev); +err_out_iounmap: + fnic_iounmap(fnic); +err_out_release_regions: + pci_release_regions(pdev); +err_out_disable_device: + pci_disable_device(pdev); +err_out_free_hba: + scsi_host_put(lp->host); +err_out: + return err; +} + +static void __devexit fnic_remove(struct pci_dev *pdev) +{ + struct fnic *fnic = pci_get_drvdata(pdev); + unsigned long flags; + + /* + * Mark state so that the workqueue thread stops forwarding + * received frames and link events to the local port. ISR and + * other threads that can queue work items will also stop + * creating work items on the fnic workqueue + */ + spin_lock_irqsave(&fnic->fnic_lock, flags); + fnic->stop_rx_link_events = 1; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + + if (vnic_dev_get_intr_mode(fnic->vdev) == VNIC_DEV_INTR_MODE_MSI) + del_timer_sync(&fnic->notify_timer); + + /* + * Flush the fnic event queue. After this call, there should + * be no event queued for this fnic device in the workqueue + */ + flush_workqueue(fnic_event_queue); + skb_queue_purge(&fnic->frame_queue); + + /* + * Log off the fabric. This stops all remote ports, dns port, + * logs off the fabric. This flushes all rport, disc, lport work + * before returning + */ + fc_fabric_logoff(fnic->lport); + + spin_lock_irqsave(&fnic->fnic_lock, flags); + fnic->in_remove = 1; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + + fc_lport_destroy(fnic->lport); + + /* + * This stops the fnic device, masks all interrupts. Completed + * CQ entries are drained. Posted WQ/RQ/Copy-WQ entries are + * cleaned up + */ + fnic_cleanup(fnic); + + BUG_ON(!skb_queue_empty(&fnic->frame_queue)); + + spin_lock_irqsave(&fnic_list_lock, flags); + list_del(&fnic->list); + spin_unlock_irqrestore(&fnic_list_lock, flags); + + fc_remove_host(fnic->lport->host); + scsi_remove_host(fnic->lport->host); + fc_exch_mgr_free(fnic->lport->emp); + vnic_dev_notify_unset(fnic->vdev); + fnic_free_vnic_resources(fnic); + fnic_free_intr(fnic); + fnic_clear_intr_mode(fnic); + vnic_dev_close(fnic->vdev); + vnic_dev_unregister(fnic->vdev); + fnic_iounmap(fnic); + pci_release_regions(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + scsi_host_put(fnic->lport->host); +} + +static struct pci_driver fnic_driver = { + .name = DRV_NAME, + .id_table = fnic_id_table, + .probe = fnic_probe, + .remove = __devexit_p(fnic_remove), +}; + +static int __init fnic_init_module(void) +{ + size_t len; + int err = 0; + + printk(KERN_INFO PFX "%s, ver %s\n", DRV_DESCRIPTION, DRV_VERSION); + + /* Create a cache for allocation of default size sgls */ + len = sizeof(struct fnic_dflt_sgl_list); + fnic_sgl_cache[FNIC_SGL_CACHE_DFLT] = kmem_cache_create + ("fnic_sgl_dflt", len + FNIC_SG_DESC_ALIGN, FNIC_SG_DESC_ALIGN, + SLAB_HWCACHE_ALIGN | SLAB_CACHE_DMA, + NULL); + if (!fnic_sgl_cache[FNIC_SGL_CACHE_DFLT]) { + printk(KERN_ERR PFX "failed to create fnic dflt sgl slab\n"); + err = -ENOMEM; + goto err_create_fnic_sgl_slab_dflt; + } + + /* Create a cache for allocation of max size sgls*/ + len = sizeof(struct fnic_sgl_list); + fnic_sgl_cache[FNIC_SGL_CACHE_MAX] = kmem_cache_create + ("fnic_sgl_max", len + FNIC_SG_DESC_ALIGN, FNIC_SG_DESC_ALIGN, + SLAB_HWCACHE_ALIGN | SLAB_CACHE_DMA, + NULL); + if (!fnic_sgl_cache[FNIC_SGL_CACHE_MAX]) { + printk(KERN_ERR PFX "failed to create fnic max sgl slab\n"); + err = -ENOMEM; + goto err_create_fnic_sgl_slab_max; + } + + /* Create a cache of io_req structs for use via mempool */ + fnic_io_req_cache = kmem_cache_create("fnic_io_req", + sizeof(struct fnic_io_req), + 0, SLAB_HWCACHE_ALIGN, NULL); + if (!fnic_io_req_cache) { + printk(KERN_ERR PFX "failed to create fnic io_req slab\n"); + err = -ENOMEM; + goto err_create_fnic_ioreq_slab; + } + + fnic_event_queue = create_singlethread_workqueue("fnic_event_wq"); + if (!fnic_event_queue) { + printk(KERN_ERR PFX "fnic work queue create failed\n"); + err = -ENOMEM; + goto err_create_fnic_workq; + } + + spin_lock_init(&fnic_list_lock); + INIT_LIST_HEAD(&fnic_list); + + fnic_fc_transport = fc_attach_transport(&fnic_fc_functions); + if (!fnic_fc_transport) { + printk(KERN_ERR PFX "fc_attach_transport error\n"); + err = -ENOMEM; + goto err_fc_transport; + } + + /* register the driver with PCI system */ + err = pci_register_driver(&fnic_driver); + if (err < 0) { + printk(KERN_ERR PFX "pci register error\n"); + goto err_pci_register; + } + return err; + +err_pci_register: + fc_release_transport(fnic_fc_transport); +err_fc_transport: + destroy_workqueue(fnic_event_queue); +err_create_fnic_workq: + kmem_cache_destroy(fnic_io_req_cache); +err_create_fnic_ioreq_slab: + kmem_cache_destroy(fnic_sgl_cache[FNIC_SGL_CACHE_MAX]); +err_create_fnic_sgl_slab_max: + kmem_cache_destroy(fnic_sgl_cache[FNIC_SGL_CACHE_DFLT]); +err_create_fnic_sgl_slab_dflt: + return err; +} + +static void __exit fnic_cleanup_module(void) +{ + pci_unregister_driver(&fnic_driver); + destroy_workqueue(fnic_event_queue); + kmem_cache_destroy(fnic_sgl_cache[FNIC_SGL_CACHE_MAX]); + kmem_cache_destroy(fnic_sgl_cache[FNIC_SGL_CACHE_DFLT]); + kmem_cache_destroy(fnic_io_req_cache); + fc_release_transport(fnic_fc_transport); +} + +module_init(fnic_init_module); +module_exit(fnic_cleanup_module); + diff --git a/drivers/scsi/fnic/fnic_res.c b/drivers/scsi/fnic/fnic_res.c new file mode 100644 index 000000000000..7ba61ec715d2 --- /dev/null +++ b/drivers/scsi/fnic/fnic_res.c @@ -0,0 +1,444 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#include +#include +#include +#include "wq_enet_desc.h" +#include "rq_enet_desc.h" +#include "cq_enet_desc.h" +#include "vnic_resource.h" +#include "vnic_dev.h" +#include "vnic_wq.h" +#include "vnic_rq.h" +#include "vnic_cq.h" +#include "vnic_intr.h" +#include "vnic_stats.h" +#include "vnic_nic.h" +#include "fnic.h" + +int fnic_get_vnic_config(struct fnic *fnic) +{ + struct vnic_fc_config *c = &fnic->config; + int err; + +#define GET_CONFIG(m) \ + do { \ + err = vnic_dev_spec(fnic->vdev, \ + offsetof(struct vnic_fc_config, m), \ + sizeof(c->m), &c->m); \ + if (err) { \ + shost_printk(KERN_ERR, fnic->lport->host, \ + "Error getting %s, %d\n", #m, \ + err); \ + return err; \ + } \ + } while (0); + + GET_CONFIG(node_wwn); + GET_CONFIG(port_wwn); + GET_CONFIG(wq_enet_desc_count); + GET_CONFIG(wq_copy_desc_count); + GET_CONFIG(rq_desc_count); + GET_CONFIG(maxdatafieldsize); + GET_CONFIG(ed_tov); + GET_CONFIG(ra_tov); + GET_CONFIG(intr_timer); + GET_CONFIG(intr_timer_type); + GET_CONFIG(flags); + GET_CONFIG(flogi_retries); + GET_CONFIG(flogi_timeout); + GET_CONFIG(plogi_retries); + GET_CONFIG(plogi_timeout); + GET_CONFIG(io_throttle_count); + GET_CONFIG(link_down_timeout); + GET_CONFIG(port_down_timeout); + GET_CONFIG(port_down_io_retries); + GET_CONFIG(luns_per_tgt); + + c->wq_enet_desc_count = + min_t(u32, VNIC_FNIC_WQ_DESCS_MAX, + max_t(u32, VNIC_FNIC_WQ_DESCS_MIN, + c->wq_enet_desc_count)); + c->wq_enet_desc_count = ALIGN(c->wq_enet_desc_count, 16); + + c->wq_copy_desc_count = + min_t(u32, VNIC_FNIC_WQ_COPY_DESCS_MAX, + max_t(u32, VNIC_FNIC_WQ_COPY_DESCS_MIN, + c->wq_copy_desc_count)); + c->wq_copy_desc_count = ALIGN(c->wq_copy_desc_count, 16); + + c->rq_desc_count = + min_t(u32, VNIC_FNIC_RQ_DESCS_MAX, + max_t(u32, VNIC_FNIC_RQ_DESCS_MIN, + c->rq_desc_count)); + c->rq_desc_count = ALIGN(c->rq_desc_count, 16); + + c->maxdatafieldsize = + min_t(u16, VNIC_FNIC_MAXDATAFIELDSIZE_MAX, + max_t(u16, VNIC_FNIC_MAXDATAFIELDSIZE_MIN, + c->maxdatafieldsize)); + c->ed_tov = + min_t(u32, VNIC_FNIC_EDTOV_MAX, + max_t(u32, VNIC_FNIC_EDTOV_MIN, + c->ed_tov)); + + c->ra_tov = + min_t(u32, VNIC_FNIC_RATOV_MAX, + max_t(u32, VNIC_FNIC_RATOV_MIN, + c->ra_tov)); + + c->flogi_retries = + min_t(u32, VNIC_FNIC_FLOGI_RETRIES_MAX, c->flogi_retries); + + c->flogi_timeout = + min_t(u32, VNIC_FNIC_FLOGI_TIMEOUT_MAX, + max_t(u32, VNIC_FNIC_FLOGI_TIMEOUT_MIN, + c->flogi_timeout)); + + c->plogi_retries = + min_t(u32, VNIC_FNIC_PLOGI_RETRIES_MAX, c->plogi_retries); + + c->plogi_timeout = + min_t(u32, VNIC_FNIC_PLOGI_TIMEOUT_MAX, + max_t(u32, VNIC_FNIC_PLOGI_TIMEOUT_MIN, + c->plogi_timeout)); + + c->io_throttle_count = + min_t(u32, VNIC_FNIC_IO_THROTTLE_COUNT_MAX, + max_t(u32, VNIC_FNIC_IO_THROTTLE_COUNT_MIN, + c->io_throttle_count)); + + c->link_down_timeout = + min_t(u32, VNIC_FNIC_LINK_DOWN_TIMEOUT_MAX, + c->link_down_timeout); + + c->port_down_timeout = + min_t(u32, VNIC_FNIC_PORT_DOWN_TIMEOUT_MAX, + c->port_down_timeout); + + c->port_down_io_retries = + min_t(u32, VNIC_FNIC_PORT_DOWN_IO_RETRIES_MAX, + c->port_down_io_retries); + + c->luns_per_tgt = + min_t(u32, VNIC_FNIC_LUNS_PER_TARGET_MAX, + max_t(u32, VNIC_FNIC_LUNS_PER_TARGET_MIN, + c->luns_per_tgt)); + + c->intr_timer = min_t(u16, VNIC_INTR_TIMER_MAX, c->intr_timer); + c->intr_timer_type = c->intr_timer_type; + + shost_printk(KERN_INFO, fnic->lport->host, + "vNIC MAC addr %02x:%02x:%02x:%02x:%02x:%02x " + "wq/wq_copy/rq %d/%d/%d\n", + fnic->mac_addr[0], fnic->mac_addr[1], fnic->mac_addr[2], + fnic->mac_addr[3], fnic->mac_addr[4], fnic->mac_addr[5], + c->wq_enet_desc_count, c->wq_copy_desc_count, + c->rq_desc_count); + shost_printk(KERN_INFO, fnic->lport->host, + "vNIC node wwn %llx port wwn %llx\n", + c->node_wwn, c->port_wwn); + shost_printk(KERN_INFO, fnic->lport->host, + "vNIC ed_tov %d ra_tov %d\n", + c->ed_tov, c->ra_tov); + shost_printk(KERN_INFO, fnic->lport->host, + "vNIC mtu %d intr timer %d\n", + c->maxdatafieldsize, c->intr_timer); + shost_printk(KERN_INFO, fnic->lport->host, + "vNIC flags 0x%x luns per tgt %d\n", + c->flags, c->luns_per_tgt); + shost_printk(KERN_INFO, fnic->lport->host, + "vNIC flogi_retries %d flogi timeout %d\n", + c->flogi_retries, c->flogi_timeout); + shost_printk(KERN_INFO, fnic->lport->host, + "vNIC plogi retries %d plogi timeout %d\n", + c->plogi_retries, c->plogi_timeout); + shost_printk(KERN_INFO, fnic->lport->host, + "vNIC io throttle count %d link dn timeout %d\n", + c->io_throttle_count, c->link_down_timeout); + shost_printk(KERN_INFO, fnic->lport->host, + "vNIC port dn io retries %d port dn timeout %d\n", + c->port_down_io_retries, c->port_down_timeout); + + return 0; +} + +int fnic_set_nic_config(struct fnic *fnic, u8 rss_default_cpu, + u8 rss_hash_type, + u8 rss_hash_bits, u8 rss_base_cpu, u8 rss_enable, + u8 tso_ipid_split_en, u8 ig_vlan_strip_en) +{ + u64 a0, a1; + u32 nic_cfg; + int wait = 1000; + + vnic_set_nic_cfg(&nic_cfg, rss_default_cpu, + rss_hash_type, rss_hash_bits, rss_base_cpu, + rss_enable, tso_ipid_split_en, ig_vlan_strip_en); + + a0 = nic_cfg; + a1 = 0; + + return vnic_dev_cmd(fnic->vdev, CMD_NIC_CFG, &a0, &a1, wait); +} + +void fnic_get_res_counts(struct fnic *fnic) +{ + fnic->wq_count = vnic_dev_get_res_count(fnic->vdev, RES_TYPE_WQ); + fnic->raw_wq_count = fnic->wq_count - 1; + fnic->wq_copy_count = fnic->wq_count - fnic->raw_wq_count; + fnic->rq_count = vnic_dev_get_res_count(fnic->vdev, RES_TYPE_RQ); + fnic->cq_count = vnic_dev_get_res_count(fnic->vdev, RES_TYPE_CQ); + fnic->intr_count = vnic_dev_get_res_count(fnic->vdev, + RES_TYPE_INTR_CTRL); +} + +void fnic_free_vnic_resources(struct fnic *fnic) +{ + unsigned int i; + + for (i = 0; i < fnic->raw_wq_count; i++) + vnic_wq_free(&fnic->wq[i]); + + for (i = 0; i < fnic->wq_copy_count; i++) + vnic_wq_copy_free(&fnic->wq_copy[i]); + + for (i = 0; i < fnic->rq_count; i++) + vnic_rq_free(&fnic->rq[i]); + + for (i = 0; i < fnic->cq_count; i++) + vnic_cq_free(&fnic->cq[i]); + + for (i = 0; i < fnic->intr_count; i++) + vnic_intr_free(&fnic->intr[i]); +} + +int fnic_alloc_vnic_resources(struct fnic *fnic) +{ + enum vnic_dev_intr_mode intr_mode; + unsigned int mask_on_assertion; + unsigned int interrupt_offset; + unsigned int error_interrupt_enable; + unsigned int error_interrupt_offset; + unsigned int i, cq_index; + unsigned int wq_copy_cq_desc_count; + int err; + + intr_mode = vnic_dev_get_intr_mode(fnic->vdev); + + shost_printk(KERN_INFO, fnic->lport->host, "vNIC interrupt mode: %s\n", + intr_mode == VNIC_DEV_INTR_MODE_INTX ? "legacy PCI INTx" : + intr_mode == VNIC_DEV_INTR_MODE_MSI ? "MSI" : + intr_mode == VNIC_DEV_INTR_MODE_MSIX ? + "MSI-X" : "unknown"); + + shost_printk(KERN_INFO, fnic->lport->host, "vNIC resources avail: " + "wq %d cp_wq %d raw_wq %d rq %d cq %d intr %d\n", + fnic->wq_count, fnic->wq_copy_count, fnic->raw_wq_count, + fnic->rq_count, fnic->cq_count, fnic->intr_count); + + /* Allocate Raw WQ used for FCS frames */ + for (i = 0; i < fnic->raw_wq_count; i++) { + err = vnic_wq_alloc(fnic->vdev, &fnic->wq[i], i, + fnic->config.wq_enet_desc_count, + sizeof(struct wq_enet_desc)); + if (err) + goto err_out_cleanup; + } + + /* Allocate Copy WQs used for SCSI IOs */ + for (i = 0; i < fnic->wq_copy_count; i++) { + err = vnic_wq_copy_alloc(fnic->vdev, &fnic->wq_copy[i], + (fnic->raw_wq_count + i), + fnic->config.wq_copy_desc_count, + sizeof(struct fcpio_host_req)); + if (err) + goto err_out_cleanup; + } + + /* RQ for receiving FCS frames */ + for (i = 0; i < fnic->rq_count; i++) { + err = vnic_rq_alloc(fnic->vdev, &fnic->rq[i], i, + fnic->config.rq_desc_count, + sizeof(struct rq_enet_desc)); + if (err) + goto err_out_cleanup; + } + + /* CQ for each RQ */ + for (i = 0; i < fnic->rq_count; i++) { + cq_index = i; + err = vnic_cq_alloc(fnic->vdev, + &fnic->cq[cq_index], cq_index, + fnic->config.rq_desc_count, + sizeof(struct cq_enet_rq_desc)); + if (err) + goto err_out_cleanup; + } + + /* CQ for each WQ */ + for (i = 0; i < fnic->raw_wq_count; i++) { + cq_index = fnic->rq_count + i; + err = vnic_cq_alloc(fnic->vdev, &fnic->cq[cq_index], cq_index, + fnic->config.wq_enet_desc_count, + sizeof(struct cq_enet_wq_desc)); + if (err) + goto err_out_cleanup; + } + + /* CQ for each COPY WQ */ + wq_copy_cq_desc_count = (fnic->config.wq_copy_desc_count * 3); + for (i = 0; i < fnic->wq_copy_count; i++) { + cq_index = fnic->raw_wq_count + fnic->rq_count + i; + err = vnic_cq_alloc(fnic->vdev, &fnic->cq[cq_index], + cq_index, + wq_copy_cq_desc_count, + sizeof(struct fcpio_fw_req)); + if (err) + goto err_out_cleanup; + } + + for (i = 0; i < fnic->intr_count; i++) { + err = vnic_intr_alloc(fnic->vdev, &fnic->intr[i], i); + if (err) + goto err_out_cleanup; + } + + fnic->legacy_pba = vnic_dev_get_res(fnic->vdev, + RES_TYPE_INTR_PBA_LEGACY, 0); + + if (!fnic->legacy_pba && intr_mode == VNIC_DEV_INTR_MODE_INTX) { + shost_printk(KERN_ERR, fnic->lport->host, + "Failed to hook legacy pba resource\n"); + err = -ENODEV; + goto err_out_cleanup; + } + + /* + * Init RQ/WQ resources. + * + * RQ[0 to n-1] point to CQ[0 to n-1] + * WQ[0 to m-1] point to CQ[n to n+m-1] + * WQ_COPY[0 to k-1] points to CQ[n+m to n+m+k-1] + * + * Note for copy wq we always initialize with cq_index = 0 + * + * Error interrupt is not enabled for MSI. + */ + + switch (intr_mode) { + case VNIC_DEV_INTR_MODE_INTX: + case VNIC_DEV_INTR_MODE_MSIX: + error_interrupt_enable = 1; + error_interrupt_offset = fnic->err_intr_offset; + break; + default: + error_interrupt_enable = 0; + error_interrupt_offset = 0; + break; + } + + for (i = 0; i < fnic->rq_count; i++) { + cq_index = i; + vnic_rq_init(&fnic->rq[i], + cq_index, + error_interrupt_enable, + error_interrupt_offset); + } + + for (i = 0; i < fnic->raw_wq_count; i++) { + cq_index = i + fnic->rq_count; + vnic_wq_init(&fnic->wq[i], + cq_index, + error_interrupt_enable, + error_interrupt_offset); + } + + for (i = 0; i < fnic->wq_copy_count; i++) { + vnic_wq_copy_init(&fnic->wq_copy[i], + 0 /* cq_index 0 - always */, + error_interrupt_enable, + error_interrupt_offset); + } + + for (i = 0; i < fnic->cq_count; i++) { + + switch (intr_mode) { + case VNIC_DEV_INTR_MODE_MSIX: + interrupt_offset = i; + break; + default: + interrupt_offset = 0; + break; + } + + vnic_cq_init(&fnic->cq[i], + 0 /* flow_control_enable */, + 1 /* color_enable */, + 0 /* cq_head */, + 0 /* cq_tail */, + 1 /* cq_tail_color */, + 1 /* interrupt_enable */, + 1 /* cq_entry_enable */, + 0 /* cq_message_enable */, + interrupt_offset, + 0 /* cq_message_addr */); + } + + /* + * Init INTR resources + * + * mask_on_assertion is not used for INTx due to the level- + * triggered nature of INTx + */ + + switch (intr_mode) { + case VNIC_DEV_INTR_MODE_MSI: + case VNIC_DEV_INTR_MODE_MSIX: + mask_on_assertion = 1; + break; + default: + mask_on_assertion = 0; + break; + } + + for (i = 0; i < fnic->intr_count; i++) { + vnic_intr_init(&fnic->intr[i], + fnic->config.intr_timer, + fnic->config.intr_timer_type, + mask_on_assertion); + } + + /* init the stats memory by making the first call here */ + err = vnic_dev_stats_dump(fnic->vdev, &fnic->stats); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "vnic_dev_stats_dump failed - x%x\n", err); + goto err_out_cleanup; + } + + /* Clear LIF stats */ + vnic_dev_stats_clear(fnic->vdev); + + return 0; + +err_out_cleanup: + fnic_free_vnic_resources(fnic); + + return err; +} diff --git a/drivers/scsi/fnic/fnic_res.h b/drivers/scsi/fnic/fnic_res.h new file mode 100644 index 000000000000..b6f310262534 --- /dev/null +++ b/drivers/scsi/fnic/fnic_res.h @@ -0,0 +1,197 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _FNIC_RES_H_ +#define _FNIC_RES_H_ + +#include "wq_enet_desc.h" +#include "rq_enet_desc.h" +#include "vnic_wq.h" +#include "vnic_rq.h" +#include "fnic_io.h" +#include "fcpio.h" +#include "vnic_wq_copy.h" +#include "vnic_cq_copy.h" + +static inline void fnic_queue_wq_desc(struct vnic_wq *wq, + void *os_buf, dma_addr_t dma_addr, + unsigned int len, unsigned int fc_eof, + int vlan_tag_insert, + unsigned int vlan_tag, + int cq_entry, int sop, int eop) +{ + struct wq_enet_desc *desc = vnic_wq_next_desc(wq); + + wq_enet_desc_enc(desc, + (u64)dma_addr | VNIC_PADDR_TARGET, + (u16)len, + 0, /* mss_or_csum_offset */ + (u16)fc_eof, + 0, /* offload_mode */ + (u8)eop, (u8)cq_entry, + 1, /* fcoe_encap */ + (u8)vlan_tag_insert, + (u16)vlan_tag, + 0 /* loopback */); + + vnic_wq_post(wq, os_buf, dma_addr, len, sop, eop); +} + +static inline void fnic_queue_wq_copy_desc_icmnd_16(struct vnic_wq_copy *wq, + u32 req_id, + u32 lunmap_id, u8 spl_flags, + u32 sgl_cnt, u32 sense_len, + u64 sgl_addr, u64 sns_addr, + u8 crn, u8 pri_ta, + u8 flags, u8 *scsi_cdb, + u32 data_len, u8 *lun, + u32 d_id, u16 mss, + u32 ratov, u32 edtov) +{ + struct fcpio_host_req *desc = vnic_wq_copy_next_desc(wq); + + desc->hdr.type = FCPIO_ICMND_16; /* enum fcpio_type */ + desc->hdr.status = 0; /* header status entry */ + desc->hdr._resvd = 0; /* reserved */ + desc->hdr.tag.u.req_id = req_id; /* id for this request */ + + desc->u.icmnd_16.lunmap_id = lunmap_id; /* index into lunmap table */ + desc->u.icmnd_16.special_req_flags = spl_flags; /* exch req flags */ + desc->u.icmnd_16._resvd0[0] = 0; /* reserved */ + desc->u.icmnd_16._resvd0[1] = 0; /* reserved */ + desc->u.icmnd_16._resvd0[2] = 0; /* reserved */ + desc->u.icmnd_16.sgl_cnt = sgl_cnt; /* scatter-gather list count */ + desc->u.icmnd_16.sense_len = sense_len; /* sense buffer length */ + desc->u.icmnd_16.sgl_addr = sgl_addr; /* scatter-gather list addr */ + desc->u.icmnd_16.sense_addr = sns_addr; /* sense buffer address */ + desc->u.icmnd_16.crn = crn; /* SCSI Command Reference No.*/ + desc->u.icmnd_16.pri_ta = pri_ta; /* SCSI Pri & Task attribute */ + desc->u.icmnd_16._resvd1 = 0; /* reserved: should be 0 */ + desc->u.icmnd_16.flags = flags; /* command flags */ + memcpy(desc->u.icmnd_16.scsi_cdb, scsi_cdb, CDB_16); /* SCSI CDB */ + desc->u.icmnd_16.data_len = data_len; /* length of data expected */ + memcpy(desc->u.icmnd_16.lun, lun, LUN_ADDRESS); /* LUN address */ + desc->u.icmnd_16._resvd2 = 0; /* reserved */ + hton24(desc->u.icmnd_16.d_id, d_id); /* FC vNIC only: Target D_ID */ + desc->u.icmnd_16.mss = mss; /* FC vNIC only: max burst */ + desc->u.icmnd_16.r_a_tov = ratov; /*FC vNIC only: Res. Alloc Timeout */ + desc->u.icmnd_16.e_d_tov = edtov; /*FC vNIC only: Err Detect Timeout */ + + vnic_wq_copy_post(wq); +} + +static inline void fnic_queue_wq_copy_desc_itmf(struct vnic_wq_copy *wq, + u32 req_id, u32 lunmap_id, + u32 tm_req, u32 tm_id, u8 *lun, + u32 d_id, u32 r_a_tov, + u32 e_d_tov) +{ + struct fcpio_host_req *desc = vnic_wq_copy_next_desc(wq); + + desc->hdr.type = FCPIO_ITMF; /* enum fcpio_type */ + desc->hdr.status = 0; /* header status entry */ + desc->hdr._resvd = 0; /* reserved */ + desc->hdr.tag.u.req_id = req_id; /* id for this request */ + + desc->u.itmf.lunmap_id = lunmap_id; /* index into lunmap table */ + desc->u.itmf.tm_req = tm_req; /* SCSI Task Management request */ + desc->u.itmf.t_tag = tm_id; /* tag of fcpio to be aborted */ + desc->u.itmf._resvd = 0; + memcpy(desc->u.itmf.lun, lun, LUN_ADDRESS); /* LUN address */ + desc->u.itmf._resvd1 = 0; + hton24(desc->u.itmf.d_id, d_id); /* FC vNIC only: Target D_ID */ + desc->u.itmf.r_a_tov = r_a_tov; /* FC vNIC only: R_A_TOV in msec */ + desc->u.itmf.e_d_tov = e_d_tov; /* FC vNIC only: E_D_TOV in msec */ + + vnic_wq_copy_post(wq); +} + +static inline void fnic_queue_wq_copy_desc_flogi_reg(struct vnic_wq_copy *wq, + u32 req_id, u8 format, + u32 s_id, u8 *gw_mac) +{ + struct fcpio_host_req *desc = vnic_wq_copy_next_desc(wq); + + desc->hdr.type = FCPIO_FLOGI_REG; /* enum fcpio_type */ + desc->hdr.status = 0; /* header status entry */ + desc->hdr._resvd = 0; /* reserved */ + desc->hdr.tag.u.req_id = req_id; /* id for this request */ + + desc->u.flogi_reg.format = format; + hton24(desc->u.flogi_reg.s_id, s_id); + memcpy(desc->u.flogi_reg.gateway_mac, gw_mac, ETH_ALEN); + + vnic_wq_copy_post(wq); +} + +static inline void fnic_queue_wq_copy_desc_fw_reset(struct vnic_wq_copy *wq, + u32 req_id) +{ + struct fcpio_host_req *desc = vnic_wq_copy_next_desc(wq); + + desc->hdr.type = FCPIO_RESET; /* enum fcpio_type */ + desc->hdr.status = 0; /* header status entry */ + desc->hdr._resvd = 0; /* reserved */ + desc->hdr.tag.u.req_id = req_id; /* id for this request */ + + vnic_wq_copy_post(wq); +} + +static inline void fnic_queue_wq_copy_desc_lunmap(struct vnic_wq_copy *wq, + u32 req_id, u64 lunmap_addr, + u32 lunmap_len) +{ + struct fcpio_host_req *desc = vnic_wq_copy_next_desc(wq); + + desc->hdr.type = FCPIO_LUNMAP_REQ; /* enum fcpio_type */ + desc->hdr.status = 0; /* header status entry */ + desc->hdr._resvd = 0; /* reserved */ + desc->hdr.tag.u.req_id = req_id; /* id for this request */ + + desc->u.lunmap_req.addr = lunmap_addr; /* address of the buffer */ + desc->u.lunmap_req.len = lunmap_len; /* len of the buffer */ + + vnic_wq_copy_post(wq); +} + +static inline void fnic_queue_rq_desc(struct vnic_rq *rq, + void *os_buf, dma_addr_t dma_addr, + u16 len) +{ + struct rq_enet_desc *desc = vnic_rq_next_desc(rq); + + rq_enet_desc_enc(desc, + (u64)dma_addr | VNIC_PADDR_TARGET, + RQ_ENET_TYPE_ONLY_SOP, + (u16)len); + + vnic_rq_post(rq, os_buf, 0, dma_addr, len); +} + + +struct fnic; + +int fnic_get_vnic_config(struct fnic *); +int fnic_alloc_vnic_resources(struct fnic *); +void fnic_free_vnic_resources(struct fnic *); +void fnic_get_res_counts(struct fnic *); +int fnic_set_nic_config(struct fnic *fnic, u8 rss_default_cpu, + u8 rss_hash_type, u8 rss_hash_bits, u8 rss_base_cpu, + u8 rss_enable, u8 tso_ipid_split_en, + u8 ig_vlan_strip_en); + +#endif /* _FNIC_RES_H_ */ diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c new file mode 100644 index 000000000000..eabf36502856 --- /dev/null +++ b/drivers/scsi/fnic/fnic_scsi.c @@ -0,0 +1,1850 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "fnic_io.h" +#include "fnic.h" + +const char *fnic_state_str[] = { + [FNIC_IN_FC_MODE] = "FNIC_IN_FC_MODE", + [FNIC_IN_FC_TRANS_ETH_MODE] = "FNIC_IN_FC_TRANS_ETH_MODE", + [FNIC_IN_ETH_MODE] = "FNIC_IN_ETH_MODE", + [FNIC_IN_ETH_TRANS_FC_MODE] = "FNIC_IN_ETH_TRANS_FC_MODE", +}; + +static const char *fnic_ioreq_state_str[] = { + [FNIC_IOREQ_CMD_PENDING] = "FNIC_IOREQ_CMD_PENDING", + [FNIC_IOREQ_ABTS_PENDING] = "FNIC_IOREQ_ABTS_PENDING", + [FNIC_IOREQ_ABTS_COMPLETE] = "FNIC_IOREQ_ABTS_COMPLETE", + [FNIC_IOREQ_CMD_COMPLETE] = "FNIC_IOREQ_CMD_COMPLETE", +}; + +static const char *fcpio_status_str[] = { + [FCPIO_SUCCESS] = "FCPIO_SUCCESS", /*0x0*/ + [FCPIO_INVALID_HEADER] = "FCPIO_INVALID_HEADER", + [FCPIO_OUT_OF_RESOURCE] = "FCPIO_OUT_OF_RESOURCE", + [FCPIO_INVALID_PARAM] = "FCPIO_INVALID_PARAM]", + [FCPIO_REQ_NOT_SUPPORTED] = "FCPIO_REQ_NOT_SUPPORTED", + [FCPIO_IO_NOT_FOUND] = "FCPIO_IO_NOT_FOUND", + [FCPIO_ABORTED] = "FCPIO_ABORTED", /*0x41*/ + [FCPIO_TIMEOUT] = "FCPIO_TIMEOUT", + [FCPIO_SGL_INVALID] = "FCPIO_SGL_INVALID", + [FCPIO_MSS_INVALID] = "FCPIO_MSS_INVALID", + [FCPIO_DATA_CNT_MISMATCH] = "FCPIO_DATA_CNT_MISMATCH", + [FCPIO_FW_ERR] = "FCPIO_FW_ERR", + [FCPIO_ITMF_REJECTED] = "FCPIO_ITMF_REJECTED", + [FCPIO_ITMF_FAILED] = "FCPIO_ITMF_FAILED", + [FCPIO_ITMF_INCORRECT_LUN] = "FCPIO_ITMF_INCORRECT_LUN", + [FCPIO_CMND_REJECTED] = "FCPIO_CMND_REJECTED", + [FCPIO_NO_PATH_AVAIL] = "FCPIO_NO_PATH_AVAIL", + [FCPIO_PATH_FAILED] = "FCPIO_PATH_FAILED", + [FCPIO_LUNMAP_CHNG_PEND] = "FCPIO_LUNHMAP_CHNG_PEND", +}; + +const char *fnic_state_to_str(unsigned int state) +{ + if (state >= ARRAY_SIZE(fnic_state_str) || !fnic_state_str[state]) + return "unknown"; + + return fnic_state_str[state]; +} + +static const char *fnic_ioreq_state_to_str(unsigned int state) +{ + if (state >= ARRAY_SIZE(fnic_ioreq_state_str) || + !fnic_ioreq_state_str[state]) + return "unknown"; + + return fnic_ioreq_state_str[state]; +} + +static const char *fnic_fcpio_status_to_str(unsigned int status) +{ + if (status >= ARRAY_SIZE(fcpio_status_str) || !fcpio_status_str[status]) + return "unknown"; + + return fcpio_status_str[status]; +} + +static void fnic_cleanup_io(struct fnic *fnic, int exclude_id); + +static inline spinlock_t *fnic_io_lock_hash(struct fnic *fnic, + struct scsi_cmnd *sc) +{ + u32 hash = sc->request->tag & (FNIC_IO_LOCKS - 1); + + return &fnic->io_req_lock[hash]; +} + +/* + * Unmap the data buffer and sense buffer for an io_req, + * also unmap and free the device-private scatter/gather list. + */ +static void fnic_release_ioreq_buf(struct fnic *fnic, + struct fnic_io_req *io_req, + struct scsi_cmnd *sc) +{ + if (io_req->sgl_list_pa) + pci_unmap_single(fnic->pdev, io_req->sgl_list_pa, + sizeof(io_req->sgl_list[0]) * io_req->sgl_cnt, + PCI_DMA_TODEVICE); + scsi_dma_unmap(sc); + + if (io_req->sgl_cnt) + mempool_free(io_req->sgl_list_alloc, + fnic->io_sgl_pool[io_req->sgl_type]); + if (io_req->sense_buf_pa) + pci_unmap_single(fnic->pdev, io_req->sense_buf_pa, + SCSI_SENSE_BUFFERSIZE, PCI_DMA_FROMDEVICE); +} + +/* Free up Copy Wq descriptors. Called with copy_wq lock held */ +static int free_wq_copy_descs(struct fnic *fnic, struct vnic_wq_copy *wq) +{ + /* if no Ack received from firmware, then nothing to clean */ + if (!fnic->fw_ack_recd[0]) + return 1; + + /* + * Update desc_available count based on number of freed descriptors + * Account for wraparound + */ + if (wq->to_clean_index <= fnic->fw_ack_index[0]) + wq->ring.desc_avail += (fnic->fw_ack_index[0] + - wq->to_clean_index + 1); + else + wq->ring.desc_avail += (wq->ring.desc_count + - wq->to_clean_index + + fnic->fw_ack_index[0] + 1); + + /* + * just bump clean index to ack_index+1 accounting for wraparound + * this will essentially free up all descriptors between + * to_clean_index and fw_ack_index, both inclusive + */ + wq->to_clean_index = + (fnic->fw_ack_index[0] + 1) % wq->ring.desc_count; + + /* we have processed the acks received so far */ + fnic->fw_ack_recd[0] = 0; + return 0; +} + + +/* + * fnic_fw_reset_handler + * Routine to send reset msg to fw + */ +int fnic_fw_reset_handler(struct fnic *fnic) +{ + struct vnic_wq_copy *wq = &fnic->wq_copy[0]; + int ret = 0; + unsigned long flags; + + spin_lock_irqsave(&fnic->wq_copy_lock[0], flags); + + if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0]) + free_wq_copy_descs(fnic, wq); + + if (!vnic_wq_copy_desc_avail(wq)) + ret = -EAGAIN; + else + fnic_queue_wq_copy_desc_fw_reset(wq, SCSI_NO_TAG); + + spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags); + + if (!ret) + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "Issued fw reset\n"); + else + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "Failed to issue fw reset\n"); + return ret; +} + + +/* + * fnic_flogi_reg_handler + * Routine to send flogi register msg to fw + */ +int fnic_flogi_reg_handler(struct fnic *fnic) +{ + struct vnic_wq_copy *wq = &fnic->wq_copy[0]; + u8 gw_mac[ETH_ALEN]; + int ret = 0; + unsigned long flags; + + spin_lock_irqsave(&fnic->wq_copy_lock[0], flags); + + if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0]) + free_wq_copy_descs(fnic, wq); + + if (!vnic_wq_copy_desc_avail(wq)) { + ret = -EAGAIN; + goto flogi_reg_ioreq_end; + } + + if (fnic->fcoui_mode) + memset(gw_mac, 0xff, ETH_ALEN); + else + memcpy(gw_mac, fnic->dest_addr, ETH_ALEN); + + fnic_queue_wq_copy_desc_flogi_reg(wq, SCSI_NO_TAG, + FCPIO_FLOGI_REG_GW_DEST, + fnic->s_id, + gw_mac); + +flogi_reg_ioreq_end: + spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags); + + if (!ret) + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "flog reg issued\n"); + + return ret; +} + +/* + * fnic_queue_wq_copy_desc + * Routine to enqueue a wq copy desc + */ +static inline int fnic_queue_wq_copy_desc(struct fnic *fnic, + struct vnic_wq_copy *wq, + struct fnic_io_req *io_req, + struct scsi_cmnd *sc, + u32 sg_count) +{ + struct scatterlist *sg; + struct fc_rport *rport = starget_to_rport(scsi_target(sc->device)); + struct fc_rport_libfc_priv *rp = rport->dd_data; + struct host_sg_desc *desc; + u8 pri_tag = 0; + unsigned int i; + unsigned long intr_flags; + int flags; + u8 exch_flags; + struct scsi_lun fc_lun; + char msg[2]; + + if (sg_count) { + BUG_ON(sg_count < 0); + BUG_ON(sg_count > FNIC_MAX_SG_DESC_CNT); + + /* For each SGE, create a device desc entry */ + desc = io_req->sgl_list; + for_each_sg(scsi_sglist(sc), sg, sg_count, i) { + desc->addr = cpu_to_le64(sg_dma_address(sg)); + desc->len = cpu_to_le32(sg_dma_len(sg)); + desc->_resvd = 0; + desc++; + } + + io_req->sgl_list_pa = pci_map_single + (fnic->pdev, + io_req->sgl_list, + sizeof(io_req->sgl_list[0]) * sg_count, + PCI_DMA_TODEVICE); + } + + io_req->sense_buf_pa = pci_map_single(fnic->pdev, + sc->sense_buffer, + SCSI_SENSE_BUFFERSIZE, + PCI_DMA_FROMDEVICE); + + int_to_scsilun(sc->device->lun, &fc_lun); + + pri_tag = FCPIO_ICMND_PTA_SIMPLE; + msg[0] = MSG_SIMPLE_TAG; + scsi_populate_tag_msg(sc, msg); + if (msg[0] == MSG_ORDERED_TAG) + pri_tag = FCPIO_ICMND_PTA_ORDERED; + + /* Enqueue the descriptor in the Copy WQ */ + spin_lock_irqsave(&fnic->wq_copy_lock[0], intr_flags); + + if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0]) + free_wq_copy_descs(fnic, wq); + + if (unlikely(!vnic_wq_copy_desc_avail(wq))) { + spin_unlock_irqrestore(&fnic->wq_copy_lock[0], intr_flags); + return SCSI_MLQUEUE_HOST_BUSY; + } + + flags = 0; + if (sc->sc_data_direction == DMA_FROM_DEVICE) + flags = FCPIO_ICMND_RDDATA; + else if (sc->sc_data_direction == DMA_TO_DEVICE) + flags = FCPIO_ICMND_WRDATA; + + exch_flags = 0; + if ((fnic->config.flags & VFCF_FCP_SEQ_LVL_ERR) && + (rp->flags & FC_RP_FLAGS_RETRY)) + exch_flags |= FCPIO_ICMND_SRFLAG_RETRY; + + fnic_queue_wq_copy_desc_icmnd_16(wq, sc->request->tag, + 0, exch_flags, io_req->sgl_cnt, + SCSI_SENSE_BUFFERSIZE, + io_req->sgl_list_pa, + io_req->sense_buf_pa, + 0, /* scsi cmd ref, always 0 */ + pri_tag, /* scsi pri and tag */ + flags, /* command flags */ + sc->cmnd, scsi_bufflen(sc), + fc_lun.scsi_lun, io_req->port_id, + rport->maxframe_size, rp->r_a_tov, + rp->e_d_tov); + + spin_unlock_irqrestore(&fnic->wq_copy_lock[0], intr_flags); + return 0; +} + +/* + * fnic_queuecommand + * Routine to send a scsi cdb + * Called with host_lock held and interrupts disabled. + */ +int fnic_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)) +{ + struct fc_lport *lp; + struct fc_rport *rport; + struct fnic_io_req *io_req; + struct fnic *fnic; + struct vnic_wq_copy *wq; + int ret; + u32 sg_count; + unsigned long flags; + unsigned long ptr; + + rport = starget_to_rport(scsi_target(sc->device)); + ret = fc_remote_port_chkready(rport); + if (ret) { + sc->result = ret; + done(sc); + return 0; + } + + lp = shost_priv(sc->device->host); + if (lp->state != LPORT_ST_READY || !(lp->link_up)) + return SCSI_MLQUEUE_HOST_BUSY; + + /* + * Release host lock, use driver resource specific locks from here. + * Don't re-enable interrupts in case they were disabled prior to the + * caller disabling them. + */ + spin_unlock(lp->host->host_lock); + + /* Get a new io_req for this SCSI IO */ + fnic = lport_priv(lp); + + io_req = mempool_alloc(fnic->io_req_pool, GFP_ATOMIC); + if (!io_req) { + ret = SCSI_MLQUEUE_HOST_BUSY; + goto out; + } + memset(io_req, 0, sizeof(*io_req)); + + /* Map the data buffer */ + sg_count = scsi_dma_map(sc); + if (sg_count < 0) { + mempool_free(io_req, fnic->io_req_pool); + goto out; + } + + /* Determine the type of scatter/gather list we need */ + io_req->sgl_cnt = sg_count; + io_req->sgl_type = FNIC_SGL_CACHE_DFLT; + if (sg_count > FNIC_DFLT_SG_DESC_CNT) + io_req->sgl_type = FNIC_SGL_CACHE_MAX; + + if (sg_count) { + io_req->sgl_list = + mempool_alloc(fnic->io_sgl_pool[io_req->sgl_type], + GFP_ATOMIC | GFP_DMA); + if (!io_req->sgl_list) { + ret = SCSI_MLQUEUE_HOST_BUSY; + scsi_dma_unmap(sc); + mempool_free(io_req, fnic->io_req_pool); + goto out; + } + + /* Cache sgl list allocated address before alignment */ + io_req->sgl_list_alloc = io_req->sgl_list; + ptr = (unsigned long) io_req->sgl_list; + if (ptr % FNIC_SG_DESC_ALIGN) { + io_req->sgl_list = (struct host_sg_desc *) + (((unsigned long) ptr + + FNIC_SG_DESC_ALIGN - 1) + & ~(FNIC_SG_DESC_ALIGN - 1)); + } + } + + /* initialize rest of io_req */ + io_req->port_id = rport->port_id; + CMD_STATE(sc) = FNIC_IOREQ_CMD_PENDING; + CMD_SP(sc) = (char *)io_req; + sc->scsi_done = done; + + /* create copy wq desc and enqueue it */ + wq = &fnic->wq_copy[0]; + ret = fnic_queue_wq_copy_desc(fnic, wq, io_req, sc, sg_count); + if (ret) { + /* + * In case another thread cancelled the request, + * refetch the pointer under the lock. + */ + spinlock_t *io_lock = fnic_io_lock_hash(fnic, sc); + + spin_lock_irqsave(io_lock, flags); + io_req = (struct fnic_io_req *)CMD_SP(sc); + CMD_SP(sc) = NULL; + CMD_STATE(sc) = FNIC_IOREQ_CMD_COMPLETE; + spin_unlock_irqrestore(io_lock, flags); + if (io_req) { + fnic_release_ioreq_buf(fnic, io_req, sc); + mempool_free(io_req, fnic->io_req_pool); + } + } +out: + /* acquire host lock before returning to SCSI */ + spin_lock(lp->host->host_lock); + return ret; +} + +/* + * fnic_fcpio_fw_reset_cmpl_handler + * Routine to handle fw reset completion + */ +static int fnic_fcpio_fw_reset_cmpl_handler(struct fnic *fnic, + struct fcpio_fw_req *desc) +{ + u8 type; + u8 hdr_status; + struct fcpio_tag tag; + int ret = 0; + struct fc_frame *flogi; + unsigned long flags; + + fcpio_header_dec(&desc->hdr, &type, &hdr_status, &tag); + + /* Clean up all outstanding io requests */ + fnic_cleanup_io(fnic, SCSI_NO_TAG); + + spin_lock_irqsave(&fnic->fnic_lock, flags); + + flogi = fnic->flogi; + fnic->flogi = NULL; + + /* fnic should be in FC_TRANS_ETH_MODE */ + if (fnic->state == FNIC_IN_FC_TRANS_ETH_MODE) { + /* Check status of reset completion */ + if (!hdr_status) { + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "reset cmpl success\n"); + /* Ready to send flogi out */ + fnic->state = FNIC_IN_ETH_MODE; + } else { + FNIC_SCSI_DBG(KERN_DEBUG, + fnic->lport->host, + "fnic fw_reset : failed %s\n", + fnic_fcpio_status_to_str(hdr_status)); + + /* + * Unable to change to eth mode, cannot send out flogi + * Change state to fc mode, so that subsequent Flogi + * requests from libFC will cause more attempts to + * reset the firmware. Free the cached flogi + */ + fnic->state = FNIC_IN_FC_MODE; + ret = -1; + } + } else { + FNIC_SCSI_DBG(KERN_DEBUG, + fnic->lport->host, + "Unexpected state %s while processing" + " reset cmpl\n", fnic_state_to_str(fnic->state)); + ret = -1; + } + + /* Thread removing device blocks till firmware reset is complete */ + if (fnic->remove_wait) + complete(fnic->remove_wait); + + /* + * If fnic is being removed, or fw reset failed + * free the flogi frame. Else, send it out + */ + if (fnic->remove_wait || ret) { + fnic->flogi_oxid = FC_XID_UNKNOWN; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + if (flogi) + dev_kfree_skb_irq(fp_skb(flogi)); + goto reset_cmpl_handler_end; + } + + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + + if (flogi) + ret = fnic_send_frame(fnic, flogi); + + reset_cmpl_handler_end: + return ret; +} + +/* + * fnic_fcpio_flogi_reg_cmpl_handler + * Routine to handle flogi register completion + */ +static int fnic_fcpio_flogi_reg_cmpl_handler(struct fnic *fnic, + struct fcpio_fw_req *desc) +{ + u8 type; + u8 hdr_status; + struct fcpio_tag tag; + int ret = 0; + struct fc_frame *flogi_resp = NULL; + unsigned long flags; + struct sk_buff *skb; + + fcpio_header_dec(&desc->hdr, &type, &hdr_status, &tag); + + /* Update fnic state based on status of flogi reg completion */ + spin_lock_irqsave(&fnic->fnic_lock, flags); + + flogi_resp = fnic->flogi_resp; + fnic->flogi_resp = NULL; + + if (fnic->state == FNIC_IN_ETH_TRANS_FC_MODE) { + + /* Check flogi registration completion status */ + if (!hdr_status) { + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "flog reg succeeded\n"); + fnic->state = FNIC_IN_FC_MODE; + } else { + FNIC_SCSI_DBG(KERN_DEBUG, + fnic->lport->host, + "fnic flogi reg :failed %s\n", + fnic_fcpio_status_to_str(hdr_status)); + fnic->state = FNIC_IN_ETH_MODE; + ret = -1; + } + } else { + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "Unexpected fnic state %s while" + " processing flogi reg completion\n", + fnic_state_to_str(fnic->state)); + ret = -1; + } + + /* Successful flogi reg cmpl, pass frame to LibFC */ + if (!ret && flogi_resp) { + if (fnic->stop_rx_link_events) { + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + goto reg_cmpl_handler_end; + } + skb = (struct sk_buff *)flogi_resp; + /* Use fr_flags to indicate whether flogi resp or not */ + fr_flags(flogi_resp) = 1; + fr_dev(flogi_resp) = fnic->lport; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + + skb_queue_tail(&fnic->frame_queue, skb); + queue_work(fnic_event_queue, &fnic->frame_work); + + } else { + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + if (flogi_resp) + dev_kfree_skb_irq(fp_skb(flogi_resp)); + } + +reg_cmpl_handler_end: + return ret; +} + +static inline int is_ack_index_in_range(struct vnic_wq_copy *wq, + u16 request_out) +{ + if (wq->to_clean_index <= wq->to_use_index) { + /* out of range, stale request_out index */ + if (request_out < wq->to_clean_index || + request_out >= wq->to_use_index) + return 0; + } else { + /* out of range, stale request_out index */ + if (request_out < wq->to_clean_index && + request_out >= wq->to_use_index) + return 0; + } + /* request_out index is in range */ + return 1; +} + + +/* + * Mark that ack received and store the Ack index. If there are multiple + * acks received before Tx thread cleans it up, the latest value will be + * used which is correct behavior. This state should be in the copy Wq + * instead of in the fnic + */ +static inline void fnic_fcpio_ack_handler(struct fnic *fnic, + unsigned int cq_index, + struct fcpio_fw_req *desc) +{ + struct vnic_wq_copy *wq; + u16 request_out = desc->u.ack.request_out; + unsigned long flags; + + /* mark the ack state */ + wq = &fnic->wq_copy[cq_index - fnic->raw_wq_count - fnic->rq_count]; + spin_lock_irqsave(&fnic->wq_copy_lock[0], flags); + + if (is_ack_index_in_range(wq, request_out)) { + fnic->fw_ack_index[0] = request_out; + fnic->fw_ack_recd[0] = 1; + } + spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags); +} + +/* + * fnic_fcpio_icmnd_cmpl_handler + * Routine to handle icmnd completions + */ +static void fnic_fcpio_icmnd_cmpl_handler(struct fnic *fnic, + struct fcpio_fw_req *desc) +{ + u8 type; + u8 hdr_status; + struct fcpio_tag tag; + u32 id; + u64 xfer_len = 0; + struct fcpio_icmnd_cmpl *icmnd_cmpl; + struct fnic_io_req *io_req; + struct scsi_cmnd *sc; + unsigned long flags; + spinlock_t *io_lock; + + /* Decode the cmpl description to get the io_req id */ + fcpio_header_dec(&desc->hdr, &type, &hdr_status, &tag); + fcpio_tag_id_dec(&tag, &id); + + if (id >= FNIC_MAX_IO_REQ) + return; + + sc = scsi_host_find_tag(fnic->lport->host, id); + WARN_ON_ONCE(!sc); + if (!sc) + return; + + io_lock = fnic_io_lock_hash(fnic, sc); + spin_lock_irqsave(io_lock, flags); + io_req = (struct fnic_io_req *)CMD_SP(sc); + WARN_ON_ONCE(!io_req); + if (!io_req) { + spin_unlock_irqrestore(io_lock, flags); + return; + } + + /* firmware completed the io */ + io_req->io_completed = 1; + + /* + * if SCSI-ML has already issued abort on this command, + * ignore completion of the IO. The abts path will clean it up + */ + if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) { + spin_unlock_irqrestore(io_lock, flags); + return; + } + + /* Mark the IO as complete */ + CMD_STATE(sc) = FNIC_IOREQ_CMD_COMPLETE; + + icmnd_cmpl = &desc->u.icmnd_cmpl; + + switch (hdr_status) { + case FCPIO_SUCCESS: + sc->result = (DID_OK << 16) | icmnd_cmpl->scsi_status; + xfer_len = scsi_bufflen(sc); + scsi_set_resid(sc, icmnd_cmpl->residual); + + if (icmnd_cmpl->flags & FCPIO_ICMND_CMPL_RESID_UNDER) + xfer_len -= icmnd_cmpl->residual; + + /* + * If queue_full, then try to reduce queue depth for all + * LUNS on the target. Todo: this should be accompanied + * by a periodic queue_depth rampup based on successful + * IO completion. + */ + if (icmnd_cmpl->scsi_status == QUEUE_FULL) { + struct scsi_device *t_sdev; + int qd = 0; + + shost_for_each_device(t_sdev, sc->device->host) { + if (t_sdev->id != sc->device->id) + continue; + + if (t_sdev->queue_depth > 1) { + qd = scsi_track_queue_full + (t_sdev, + t_sdev->queue_depth - 1); + if (qd == -1) + qd = t_sdev->host->cmd_per_lun; + shost_printk(KERN_INFO, + fnic->lport->host, + "scsi[%d:%d:%d:%d" + "] queue full detected," + "new depth = %d\n", + t_sdev->host->host_no, + t_sdev->channel, + t_sdev->id, t_sdev->lun, + t_sdev->queue_depth); + } + } + } + break; + + case FCPIO_TIMEOUT: /* request was timed out */ + sc->result = (DID_TIME_OUT << 16) | icmnd_cmpl->scsi_status; + break; + + case FCPIO_ABORTED: /* request was aborted */ + sc->result = (DID_ERROR << 16) | icmnd_cmpl->scsi_status; + break; + + case FCPIO_DATA_CNT_MISMATCH: /* recv/sent more/less data than exp. */ + scsi_set_resid(sc, icmnd_cmpl->residual); + sc->result = (DID_ERROR << 16) | icmnd_cmpl->scsi_status; + break; + + case FCPIO_OUT_OF_RESOURCE: /* out of resources to complete request */ + sc->result = (DID_REQUEUE << 16) | icmnd_cmpl->scsi_status; + break; + case FCPIO_INVALID_HEADER: /* header contains invalid data */ + case FCPIO_INVALID_PARAM: /* some parameter in request invalid */ + case FCPIO_REQ_NOT_SUPPORTED:/* request type is not supported */ + case FCPIO_IO_NOT_FOUND: /* requested I/O was not found */ + case FCPIO_SGL_INVALID: /* request was aborted due to sgl error */ + case FCPIO_MSS_INVALID: /* request was aborted due to mss error */ + case FCPIO_FW_ERR: /* request was terminated due fw error */ + default: + shost_printk(KERN_ERR, fnic->lport->host, "hdr status = %s\n", + fnic_fcpio_status_to_str(hdr_status)); + sc->result = (DID_ERROR << 16) | icmnd_cmpl->scsi_status; + break; + } + + /* Break link with the SCSI command */ + CMD_SP(sc) = NULL; + + spin_unlock_irqrestore(io_lock, flags); + + fnic_release_ioreq_buf(fnic, io_req, sc); + + mempool_free(io_req, fnic->io_req_pool); + + if (sc->sc_data_direction == DMA_FROM_DEVICE) { + fnic->lport->host_stats.fcp_input_requests++; + fnic->fcp_input_bytes += xfer_len; + } else if (sc->sc_data_direction == DMA_TO_DEVICE) { + fnic->lport->host_stats.fcp_output_requests++; + fnic->fcp_output_bytes += xfer_len; + } else + fnic->lport->host_stats.fcp_control_requests++; + + /* Call SCSI completion function to complete the IO */ + if (sc->scsi_done) + sc->scsi_done(sc); + +} + +/* fnic_fcpio_itmf_cmpl_handler + * Routine to handle itmf completions + */ +static void fnic_fcpio_itmf_cmpl_handler(struct fnic *fnic, + struct fcpio_fw_req *desc) +{ + u8 type; + u8 hdr_status; + struct fcpio_tag tag; + u32 id; + struct scsi_cmnd *sc; + struct fnic_io_req *io_req; + unsigned long flags; + spinlock_t *io_lock; + + fcpio_header_dec(&desc->hdr, &type, &hdr_status, &tag); + fcpio_tag_id_dec(&tag, &id); + + if ((id & FNIC_TAG_MASK) >= FNIC_MAX_IO_REQ) + return; + + sc = scsi_host_find_tag(fnic->lport->host, id & FNIC_TAG_MASK); + WARN_ON_ONCE(!sc); + if (!sc) + return; + + io_lock = fnic_io_lock_hash(fnic, sc); + spin_lock_irqsave(io_lock, flags); + io_req = (struct fnic_io_req *)CMD_SP(sc); + WARN_ON_ONCE(!io_req); + if (!io_req) { + spin_unlock_irqrestore(io_lock, flags); + return; + } + + if (id & FNIC_TAG_ABORT) { + /* Completion of abort cmd */ + if (CMD_STATE(sc) != FNIC_IOREQ_ABTS_PENDING) { + /* This is a late completion. Ignore it */ + spin_unlock_irqrestore(io_lock, flags); + return; + } + CMD_STATE(sc) = FNIC_IOREQ_ABTS_COMPLETE; + CMD_ABTS_STATUS(sc) = hdr_status; + + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "abts cmpl recd. id %d status %s\n", + (int)(id & FNIC_TAG_MASK), + fnic_fcpio_status_to_str(hdr_status)); + + /* + * If scsi_eh thread is blocked waiting for abts to complete, + * signal completion to it. IO will be cleaned in the thread + * else clean it in this context + */ + if (io_req->abts_done) { + complete(io_req->abts_done); + spin_unlock_irqrestore(io_lock, flags); + } else { + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "abts cmpl, completing IO\n"); + CMD_SP(sc) = NULL; + sc->result = (DID_ERROR << 16); + + spin_unlock_irqrestore(io_lock, flags); + + fnic_release_ioreq_buf(fnic, io_req, sc); + mempool_free(io_req, fnic->io_req_pool); + if (sc->scsi_done) + sc->scsi_done(sc); + } + + } else if (id & FNIC_TAG_DEV_RST) { + /* Completion of device reset */ + CMD_LR_STATUS(sc) = hdr_status; + CMD_STATE(sc) = FNIC_IOREQ_CMD_COMPLETE; + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "dev reset cmpl recd. id %d status %s\n", + (int)(id & FNIC_TAG_MASK), + fnic_fcpio_status_to_str(hdr_status)); + if (io_req->dr_done) + complete(io_req->dr_done); + spin_unlock_irqrestore(io_lock, flags); + + } else { + shost_printk(KERN_ERR, fnic->lport->host, + "Unexpected itmf io state %s tag %x\n", + fnic_ioreq_state_to_str(CMD_STATE(sc)), id); + spin_unlock_irqrestore(io_lock, flags); + } + +} + +/* + * fnic_fcpio_cmpl_handler + * Routine to service the cq for wq_copy + */ +static int fnic_fcpio_cmpl_handler(struct vnic_dev *vdev, + unsigned int cq_index, + struct fcpio_fw_req *desc) +{ + struct fnic *fnic = vnic_dev_priv(vdev); + int ret = 0; + + switch (desc->hdr.type) { + case FCPIO_ACK: /* fw copied copy wq desc to its queue */ + fnic_fcpio_ack_handler(fnic, cq_index, desc); + break; + + case FCPIO_ICMND_CMPL: /* fw completed a command */ + fnic_fcpio_icmnd_cmpl_handler(fnic, desc); + break; + + case FCPIO_ITMF_CMPL: /* fw completed itmf (abort cmd, lun reset)*/ + fnic_fcpio_itmf_cmpl_handler(fnic, desc); + break; + + case FCPIO_FLOGI_REG_CMPL: /* fw completed flogi_reg */ + ret = fnic_fcpio_flogi_reg_cmpl_handler(fnic, desc); + break; + + case FCPIO_RESET_CMPL: /* fw completed reset */ + ret = fnic_fcpio_fw_reset_cmpl_handler(fnic, desc); + break; + + default: + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "firmware completion type %d\n", + desc->hdr.type); + break; + } + + return ret; +} + +/* + * fnic_wq_copy_cmpl_handler + * Routine to process wq copy + */ +int fnic_wq_copy_cmpl_handler(struct fnic *fnic, int copy_work_to_do) +{ + unsigned int wq_work_done = 0; + unsigned int i, cq_index; + unsigned int cur_work_done; + + for (i = 0; i < fnic->wq_copy_count; i++) { + cq_index = i + fnic->raw_wq_count + fnic->rq_count; + cur_work_done = vnic_cq_copy_service(&fnic->cq[cq_index], + fnic_fcpio_cmpl_handler, + copy_work_to_do); + wq_work_done += cur_work_done; + } + return wq_work_done; +} + +static void fnic_cleanup_io(struct fnic *fnic, int exclude_id) +{ + unsigned int i; + struct fnic_io_req *io_req; + unsigned long flags = 0; + struct scsi_cmnd *sc; + spinlock_t *io_lock; + + for (i = 0; i < FNIC_MAX_IO_REQ; i++) { + if (i == exclude_id) + continue; + + sc = scsi_host_find_tag(fnic->lport->host, i); + if (!sc) + continue; + + io_lock = fnic_io_lock_hash(fnic, sc); + spin_lock_irqsave(io_lock, flags); + io_req = (struct fnic_io_req *)CMD_SP(sc); + if (!io_req) { + spin_unlock_irqrestore(io_lock, flags); + goto cleanup_scsi_cmd; + } + + CMD_SP(sc) = NULL; + + spin_unlock_irqrestore(io_lock, flags); + + /* + * If there is a scsi_cmnd associated with this io_req, then + * free the corresponding state + */ + fnic_release_ioreq_buf(fnic, io_req, sc); + mempool_free(io_req, fnic->io_req_pool); + +cleanup_scsi_cmd: + sc->result = DID_TRANSPORT_DISRUPTED << 16; + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, "fnic_cleanup_io:" + " DID_TRANSPORT_DISRUPTED\n"); + + /* Complete the command to SCSI */ + if (sc->scsi_done) + sc->scsi_done(sc); + } +} + +void fnic_wq_copy_cleanup_handler(struct vnic_wq_copy *wq, + struct fcpio_host_req *desc) +{ + u32 id; + struct fnic *fnic = vnic_dev_priv(wq->vdev); + struct fnic_io_req *io_req; + struct scsi_cmnd *sc; + unsigned long flags; + spinlock_t *io_lock; + + /* get the tag reference */ + fcpio_tag_id_dec(&desc->hdr.tag, &id); + id &= FNIC_TAG_MASK; + + if (id >= FNIC_MAX_IO_REQ) + return; + + sc = scsi_host_find_tag(fnic->lport->host, id); + if (!sc) + return; + + io_lock = fnic_io_lock_hash(fnic, sc); + spin_lock_irqsave(io_lock, flags); + + /* Get the IO context which this desc refers to */ + io_req = (struct fnic_io_req *)CMD_SP(sc); + + /* fnic interrupts are turned off by now */ + + if (!io_req) { + spin_unlock_irqrestore(io_lock, flags); + goto wq_copy_cleanup_scsi_cmd; + } + + CMD_SP(sc) = NULL; + + spin_unlock_irqrestore(io_lock, flags); + + fnic_release_ioreq_buf(fnic, io_req, sc); + mempool_free(io_req, fnic->io_req_pool); + +wq_copy_cleanup_scsi_cmd: + sc->result = DID_NO_CONNECT << 16; + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, "wq_copy_cleanup_handler:" + " DID_NO_CONNECT\n"); + + if (sc->scsi_done) + sc->scsi_done(sc); +} + +static inline int fnic_queue_abort_io_req(struct fnic *fnic, int tag, + u32 task_req, u8 *fc_lun, + struct fnic_io_req *io_req) +{ + struct vnic_wq_copy *wq = &fnic->wq_copy[0]; + unsigned long flags; + + spin_lock_irqsave(&fnic->wq_copy_lock[0], flags); + + if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0]) + free_wq_copy_descs(fnic, wq); + + if (!vnic_wq_copy_desc_avail(wq)) { + spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags); + return 1; + } + fnic_queue_wq_copy_desc_itmf(wq, tag | FNIC_TAG_ABORT, + 0, task_req, tag, fc_lun, io_req->port_id, + fnic->config.ra_tov, fnic->config.ed_tov); + + spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags); + return 0; +} + +void fnic_rport_exch_reset(struct fnic *fnic, u32 port_id) +{ + int tag; + struct fnic_io_req *io_req; + spinlock_t *io_lock; + unsigned long flags; + struct scsi_cmnd *sc; + struct scsi_lun fc_lun; + enum fnic_ioreq_state old_ioreq_state; + + FNIC_SCSI_DBG(KERN_DEBUG, + fnic->lport->host, + "fnic_rport_reset_exch called portid 0x%06x\n", + port_id); + + if (fnic->in_remove) + return; + + for (tag = 0; tag < FNIC_MAX_IO_REQ; tag++) { + sc = scsi_host_find_tag(fnic->lport->host, tag); + if (!sc) + continue; + + io_lock = fnic_io_lock_hash(fnic, sc); + spin_lock_irqsave(io_lock, flags); + + io_req = (struct fnic_io_req *)CMD_SP(sc); + + if (!io_req || io_req->port_id != port_id) { + spin_unlock_irqrestore(io_lock, flags); + continue; + } + + /* + * Found IO that is still pending with firmware and + * belongs to rport that went away + */ + if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) { + spin_unlock_irqrestore(io_lock, flags); + continue; + } + old_ioreq_state = CMD_STATE(sc); + CMD_STATE(sc) = FNIC_IOREQ_ABTS_PENDING; + CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE; + + BUG_ON(io_req->abts_done); + + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "fnic_rport_reset_exch: Issuing abts\n"); + + spin_unlock_irqrestore(io_lock, flags); + + /* Now queue the abort command to firmware */ + int_to_scsilun(sc->device->lun, &fc_lun); + + if (fnic_queue_abort_io_req(fnic, tag, + FCPIO_ITMF_ABT_TASK_TERM, + fc_lun.scsi_lun, io_req)) { + /* + * Revert the cmd state back to old state, if + * it hasnt changed in between. This cmd will get + * aborted later by scsi_eh, or cleaned up during + * lun reset + */ + io_lock = fnic_io_lock_hash(fnic, sc); + + spin_lock_irqsave(io_lock, flags); + if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) + CMD_STATE(sc) = old_ioreq_state; + spin_unlock_irqrestore(io_lock, flags); + } + } + +} + +void fnic_terminate_rport_io(struct fc_rport *rport) +{ + int tag; + struct fnic_io_req *io_req; + spinlock_t *io_lock; + unsigned long flags; + struct scsi_cmnd *sc; + struct scsi_lun fc_lun; + struct fc_rport_libfc_priv *rdata = rport->dd_data; + struct fc_lport *lport = rdata->local_port; + struct fnic *fnic = lport_priv(lport); + struct fc_rport *cmd_rport; + enum fnic_ioreq_state old_ioreq_state; + + FNIC_SCSI_DBG(KERN_DEBUG, + fnic->lport->host, "fnic_terminate_rport_io called" + " wwpn 0x%llx, wwnn0x%llx, portid 0x%06x\n", + rport->port_name, rport->node_name, + rport->port_id); + + if (fnic->in_remove) + return; + + for (tag = 0; tag < FNIC_MAX_IO_REQ; tag++) { + sc = scsi_host_find_tag(fnic->lport->host, tag); + if (!sc) + continue; + + cmd_rport = starget_to_rport(scsi_target(sc->device)); + if (rport != cmd_rport) + continue; + + io_lock = fnic_io_lock_hash(fnic, sc); + spin_lock_irqsave(io_lock, flags); + + io_req = (struct fnic_io_req *)CMD_SP(sc); + + if (!io_req || rport != cmd_rport) { + spin_unlock_irqrestore(io_lock, flags); + continue; + } + + /* + * Found IO that is still pending with firmware and + * belongs to rport that went away + */ + if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) { + spin_unlock_irqrestore(io_lock, flags); + continue; + } + old_ioreq_state = CMD_STATE(sc); + CMD_STATE(sc) = FNIC_IOREQ_ABTS_PENDING; + CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE; + + BUG_ON(io_req->abts_done); + + FNIC_SCSI_DBG(KERN_DEBUG, + fnic->lport->host, + "fnic_terminate_rport_io: Issuing abts\n"); + + spin_unlock_irqrestore(io_lock, flags); + + /* Now queue the abort command to firmware */ + int_to_scsilun(sc->device->lun, &fc_lun); + + if (fnic_queue_abort_io_req(fnic, tag, + FCPIO_ITMF_ABT_TASK_TERM, + fc_lun.scsi_lun, io_req)) { + /* + * Revert the cmd state back to old state, if + * it hasnt changed in between. This cmd will get + * aborted later by scsi_eh, or cleaned up during + * lun reset + */ + io_lock = fnic_io_lock_hash(fnic, sc); + + spin_lock_irqsave(io_lock, flags); + if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) + CMD_STATE(sc) = old_ioreq_state; + spin_unlock_irqrestore(io_lock, flags); + } + } + +} + +static void fnic_block_error_handler(struct scsi_cmnd *sc) +{ + struct Scsi_Host *shost = sc->device->host; + struct fc_rport *rport = starget_to_rport(scsi_target(sc->device)); + unsigned long flags; + + spin_lock_irqsave(shost->host_lock, flags); + while (rport->port_state == FC_PORTSTATE_BLOCKED) { + spin_unlock_irqrestore(shost->host_lock, flags); + msleep(1000); + spin_lock_irqsave(shost->host_lock, flags); + } + spin_unlock_irqrestore(shost->host_lock, flags); + +} + +/* + * This function is exported to SCSI for sending abort cmnds. + * A SCSI IO is represented by a io_req in the driver. + * The ioreq is linked to the SCSI Cmd, thus a link with the ULP's IO. + */ +int fnic_abort_cmd(struct scsi_cmnd *sc) +{ + struct fc_lport *lp; + struct fnic *fnic; + struct fnic_io_req *io_req; + struct fc_rport *rport; + spinlock_t *io_lock; + unsigned long flags; + int ret = SUCCESS; + u32 task_req; + struct scsi_lun fc_lun; + DECLARE_COMPLETION_ONSTACK(tm_done); + + /* Wait for rport to unblock */ + fnic_block_error_handler(sc); + + /* Get local-port, check ready and link up */ + lp = shost_priv(sc->device->host); + + fnic = lport_priv(lp); + FNIC_SCSI_DBG(KERN_DEBUG, + fnic->lport->host, + "Abort Cmd called FCID 0x%x, LUN 0x%x TAG %d\n", + (starget_to_rport(scsi_target(sc->device)))->port_id, + sc->device->lun, sc->request->tag); + + if (lp->state != LPORT_ST_READY || !(lp->link_up)) { + ret = FAILED; + goto fnic_abort_cmd_end; + } + + /* + * Avoid a race between SCSI issuing the abort and the device + * completing the command. + * + * If the command is already completed by the fw cmpl code, + * we just return SUCCESS from here. This means that the abort + * succeeded. In the SCSI ML, since the timeout for command has + * happened, the completion wont actually complete the command + * and it will be considered as an aborted command + * + * The CMD_SP will not be cleared except while holding io_req_lock. + */ + io_lock = fnic_io_lock_hash(fnic, sc); + spin_lock_irqsave(io_lock, flags); + io_req = (struct fnic_io_req *)CMD_SP(sc); + if (!io_req) { + spin_unlock_irqrestore(io_lock, flags); + goto fnic_abort_cmd_end; + } + + io_req->abts_done = &tm_done; + + if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) { + spin_unlock_irqrestore(io_lock, flags); + goto wait_pending; + } + /* + * Command is still pending, need to abort it + * If the firmware completes the command after this point, + * the completion wont be done till mid-layer, since abort + * has already started. + */ + CMD_STATE(sc) = FNIC_IOREQ_ABTS_PENDING; + CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE; + + spin_unlock_irqrestore(io_lock, flags); + + /* + * Check readiness of the remote port. If the path to remote + * port is up, then send abts to the remote port to terminate + * the IO. Else, just locally terminate the IO in the firmware + */ + rport = starget_to_rport(scsi_target(sc->device)); + if (fc_remote_port_chkready(rport) == 0) + task_req = FCPIO_ITMF_ABT_TASK; + else + task_req = FCPIO_ITMF_ABT_TASK_TERM; + + /* Now queue the abort command to firmware */ + int_to_scsilun(sc->device->lun, &fc_lun); + + if (fnic_queue_abort_io_req(fnic, sc->request->tag, task_req, + fc_lun.scsi_lun, io_req)) { + spin_lock_irqsave(io_lock, flags); + io_req = (struct fnic_io_req *)CMD_SP(sc); + if (io_req) + io_req->abts_done = NULL; + spin_unlock_irqrestore(io_lock, flags); + ret = FAILED; + goto fnic_abort_cmd_end; + } + + /* + * We queued an abort IO, wait for its completion. + * Once the firmware completes the abort command, it will + * wake up this thread. + */ + wait_pending: + wait_for_completion_timeout(&tm_done, + msecs_to_jiffies + (2 * fnic->config.ra_tov + + fnic->config.ed_tov)); + + /* Check the abort status */ + spin_lock_irqsave(io_lock, flags); + + io_req = (struct fnic_io_req *)CMD_SP(sc); + if (!io_req) { + spin_unlock_irqrestore(io_lock, flags); + ret = FAILED; + goto fnic_abort_cmd_end; + } + io_req->abts_done = NULL; + + /* fw did not complete abort, timed out */ + if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) { + spin_unlock_irqrestore(io_lock, flags); + ret = FAILED; + goto fnic_abort_cmd_end; + } + + /* + * firmware completed the abort, check the status, + * free the io_req irrespective of failure or success + */ + if (CMD_ABTS_STATUS(sc) != FCPIO_SUCCESS) + ret = FAILED; + + CMD_SP(sc) = NULL; + + spin_unlock_irqrestore(io_lock, flags); + + fnic_release_ioreq_buf(fnic, io_req, sc); + mempool_free(io_req, fnic->io_req_pool); + +fnic_abort_cmd_end: + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "Returning from abort cmd %s\n", + (ret == SUCCESS) ? + "SUCCESS" : "FAILED"); + return ret; +} + +static inline int fnic_queue_dr_io_req(struct fnic *fnic, + struct scsi_cmnd *sc, + struct fnic_io_req *io_req) +{ + struct vnic_wq_copy *wq = &fnic->wq_copy[0]; + struct scsi_lun fc_lun; + int ret = 0; + unsigned long intr_flags; + + spin_lock_irqsave(&fnic->wq_copy_lock[0], intr_flags); + + if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0]) + free_wq_copy_descs(fnic, wq); + + if (!vnic_wq_copy_desc_avail(wq)) { + ret = -EAGAIN; + goto lr_io_req_end; + } + + /* fill in the lun info */ + int_to_scsilun(sc->device->lun, &fc_lun); + + fnic_queue_wq_copy_desc_itmf(wq, sc->request->tag | FNIC_TAG_DEV_RST, + 0, FCPIO_ITMF_LUN_RESET, SCSI_NO_TAG, + fc_lun.scsi_lun, io_req->port_id, + fnic->config.ra_tov, fnic->config.ed_tov); + +lr_io_req_end: + spin_unlock_irqrestore(&fnic->wq_copy_lock[0], intr_flags); + + return ret; +} + +/* + * Clean up any pending aborts on the lun + * For each outstanding IO on this lun, whose abort is not completed by fw, + * issue a local abort. Wait for abort to complete. Return 0 if all commands + * successfully aborted, 1 otherwise + */ +static int fnic_clean_pending_aborts(struct fnic *fnic, + struct scsi_cmnd *lr_sc) +{ + int tag; + struct fnic_io_req *io_req; + spinlock_t *io_lock; + unsigned long flags; + int ret = 0; + struct scsi_cmnd *sc; + struct fc_rport *rport; + struct scsi_lun fc_lun; + struct scsi_device *lun_dev = lr_sc->device; + DECLARE_COMPLETION_ONSTACK(tm_done); + + for (tag = 0; tag < FNIC_MAX_IO_REQ; tag++) { + sc = scsi_host_find_tag(fnic->lport->host, tag); + /* + * ignore this lun reset cmd or cmds that do not belong to + * this lun + */ + if (!sc || sc == lr_sc || sc->device != lun_dev) + continue; + + io_lock = fnic_io_lock_hash(fnic, sc); + spin_lock_irqsave(io_lock, flags); + + io_req = (struct fnic_io_req *)CMD_SP(sc); + + if (!io_req || sc->device != lun_dev) { + spin_unlock_irqrestore(io_lock, flags); + continue; + } + + /* + * Found IO that is still pending with firmware and + * belongs to the LUN that we are resetting + */ + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "Found IO in %s on lun\n", + fnic_ioreq_state_to_str(CMD_STATE(sc))); + + BUG_ON(CMD_STATE(sc) != FNIC_IOREQ_ABTS_PENDING); + + CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE; + io_req->abts_done = &tm_done; + spin_unlock_irqrestore(io_lock, flags); + + /* Now queue the abort command to firmware */ + int_to_scsilun(sc->device->lun, &fc_lun); + rport = starget_to_rport(scsi_target(sc->device)); + + if (fnic_queue_abort_io_req(fnic, tag, + FCPIO_ITMF_ABT_TASK_TERM, + fc_lun.scsi_lun, io_req)) { + spin_lock_irqsave(io_lock, flags); + io_req = (struct fnic_io_req *)CMD_SP(sc); + if (io_req) + io_req->abts_done = NULL; + spin_unlock_irqrestore(io_lock, flags); + ret = 1; + goto clean_pending_aborts_end; + } + + wait_for_completion_timeout(&tm_done, + msecs_to_jiffies + (fnic->config.ed_tov)); + + /* Recheck cmd state to check if it is now aborted */ + spin_lock_irqsave(io_lock, flags); + io_req = (struct fnic_io_req *)CMD_SP(sc); + if (!io_req) { + spin_unlock_irqrestore(io_lock, flags); + ret = 1; + goto clean_pending_aborts_end; + } + + io_req->abts_done = NULL; + + /* if abort is still pending with fw, fail */ + if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) { + spin_unlock_irqrestore(io_lock, flags); + ret = 1; + goto clean_pending_aborts_end; + } + CMD_SP(sc) = NULL; + spin_unlock_irqrestore(io_lock, flags); + + fnic_release_ioreq_buf(fnic, io_req, sc); + mempool_free(io_req, fnic->io_req_pool); + } + +clean_pending_aborts_end: + return ret; +} + +/* + * SCSI Eh thread issues a Lun Reset when one or more commands on a LUN + * fail to get aborted. It calls driver's eh_device_reset with a SCSI command + * on the LUN. + */ +int fnic_device_reset(struct scsi_cmnd *sc) +{ + struct fc_lport *lp; + struct fnic *fnic; + struct fnic_io_req *io_req; + struct fc_rport *rport; + int status; + int ret = FAILED; + spinlock_t *io_lock; + unsigned long flags; + DECLARE_COMPLETION_ONSTACK(tm_done); + + /* Wait for rport to unblock */ + fnic_block_error_handler(sc); + + /* Get local-port, check ready and link up */ + lp = shost_priv(sc->device->host); + + fnic = lport_priv(lp); + FNIC_SCSI_DBG(KERN_DEBUG, + fnic->lport->host, + "Device reset called FCID 0x%x, LUN 0x%x\n", + (starget_to_rport(scsi_target(sc->device)))->port_id, + sc->device->lun); + + + if (lp->state != LPORT_ST_READY || !(lp->link_up)) + goto fnic_device_reset_end; + + /* Check if remote port up */ + rport = starget_to_rport(scsi_target(sc->device)); + if (fc_remote_port_chkready(rport)) + goto fnic_device_reset_end; + + io_lock = fnic_io_lock_hash(fnic, sc); + spin_lock_irqsave(io_lock, flags); + io_req = (struct fnic_io_req *)CMD_SP(sc); + + /* + * If there is a io_req attached to this command, then use it, + * else allocate a new one. + */ + if (!io_req) { + io_req = mempool_alloc(fnic->io_req_pool, GFP_ATOMIC); + if (!io_req) { + spin_unlock_irqrestore(io_lock, flags); + goto fnic_device_reset_end; + } + memset(io_req, 0, sizeof(*io_req)); + io_req->port_id = rport->port_id; + CMD_SP(sc) = (char *)io_req; + } + io_req->dr_done = &tm_done; + CMD_STATE(sc) = FNIC_IOREQ_CMD_PENDING; + CMD_LR_STATUS(sc) = FCPIO_INVALID_CODE; + spin_unlock_irqrestore(io_lock, flags); + + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, "TAG %d\n", + sc->request->tag); + + /* + * issue the device reset, if enqueue failed, clean up the ioreq + * and break assoc with scsi cmd + */ + if (fnic_queue_dr_io_req(fnic, sc, io_req)) { + spin_lock_irqsave(io_lock, flags); + io_req = (struct fnic_io_req *)CMD_SP(sc); + if (io_req) + io_req->dr_done = NULL; + goto fnic_device_reset_clean; + } + + /* + * Wait on the local completion for LUN reset. The io_req may be + * freed while we wait since we hold no lock. + */ + wait_for_completion_timeout(&tm_done, + msecs_to_jiffies(FNIC_LUN_RESET_TIMEOUT)); + + spin_lock_irqsave(io_lock, flags); + io_req = (struct fnic_io_req *)CMD_SP(sc); + if (!io_req) { + spin_unlock_irqrestore(io_lock, flags); + goto fnic_device_reset_end; + } + io_req->dr_done = NULL; + + status = CMD_LR_STATUS(sc); + spin_unlock_irqrestore(io_lock, flags); + + /* + * If lun reset not completed, bail out with failed. io_req + * gets cleaned up during higher levels of EH + */ + if (status == FCPIO_INVALID_CODE) { + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "Device reset timed out\n"); + goto fnic_device_reset_end; + } + + /* Completed, but not successful, clean up the io_req, return fail */ + if (status != FCPIO_SUCCESS) { + spin_lock_irqsave(io_lock, flags); + FNIC_SCSI_DBG(KERN_DEBUG, + fnic->lport->host, + "Device reset completed - failed\n"); + io_req = (struct fnic_io_req *)CMD_SP(sc); + goto fnic_device_reset_clean; + } + + /* + * Clean up any aborts on this lun that have still not + * completed. If any of these fail, then LUN reset fails. + * clean_pending_aborts cleans all cmds on this lun except + * the lun reset cmd. If all cmds get cleaned, the lun reset + * succeeds + */ + if (fnic_clean_pending_aborts(fnic, sc)) { + spin_lock_irqsave(io_lock, flags); + io_req = (struct fnic_io_req *)CMD_SP(sc); + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "Device reset failed" + " since could not abort all IOs\n"); + goto fnic_device_reset_clean; + } + + /* Clean lun reset command */ + spin_lock_irqsave(io_lock, flags); + io_req = (struct fnic_io_req *)CMD_SP(sc); + if (io_req) + /* Completed, and successful */ + ret = SUCCESS; + +fnic_device_reset_clean: + if (io_req) + CMD_SP(sc) = NULL; + + spin_unlock_irqrestore(io_lock, flags); + + if (io_req) { + fnic_release_ioreq_buf(fnic, io_req, sc); + mempool_free(io_req, fnic->io_req_pool); + } + +fnic_device_reset_end: + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "Returning from device reset %s\n", + (ret == SUCCESS) ? + "SUCCESS" : "FAILED"); + return ret; +} + +/* Clean up all IOs, clean up libFC local port */ +int fnic_reset(struct Scsi_Host *shost) +{ + struct fc_lport *lp; + struct fnic *fnic; + int ret = SUCCESS; + + lp = shost_priv(shost); + fnic = lport_priv(lp); + + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "fnic_reset called\n"); + + /* + * Reset local port, this will clean up libFC exchanges, + * reset remote port sessions, and if link is up, begin flogi + */ + if (lp->tt.lport_reset(lp)) + ret = FAILED; + + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "Returning from fnic reset %s\n", + (ret == SUCCESS) ? + "SUCCESS" : "FAILED"); + + return ret; +} + +/* + * SCSI Error handling calls driver's eh_host_reset if all prior + * error handling levels return FAILED. If host reset completes + * successfully, and if link is up, then Fabric login begins. + * + * Host Reset is the highest level of error recovery. If this fails, then + * host is offlined by SCSI. + * + */ +int fnic_host_reset(struct scsi_cmnd *sc) +{ + int ret; + unsigned long wait_host_tmo; + struct Scsi_Host *shost = sc->device->host; + struct fc_lport *lp = shost_priv(shost); + + /* + * If fnic_reset is successful, wait for fabric login to complete + * scsi-ml tries to send a TUR to every device if host reset is + * successful, so before returning to scsi, fabric should be up + */ + ret = fnic_reset(shost); + if (ret == SUCCESS) { + wait_host_tmo = jiffies + FNIC_HOST_RESET_SETTLE_TIME * HZ; + ret = FAILED; + while (time_before(jiffies, wait_host_tmo)) { + if ((lp->state == LPORT_ST_READY) && + (lp->link_up)) { + ret = SUCCESS; + break; + } + ssleep(1); + } + } + + return ret; +} + +/* + * This fxn is called from libFC when host is removed + */ +void fnic_scsi_abort_io(struct fc_lport *lp) +{ + int err = 0; + unsigned long flags; + enum fnic_state old_state; + struct fnic *fnic = lport_priv(lp); + DECLARE_COMPLETION_ONSTACK(remove_wait); + + /* Issue firmware reset for fnic, wait for reset to complete */ + spin_lock_irqsave(&fnic->fnic_lock, flags); + fnic->remove_wait = &remove_wait; + old_state = fnic->state; + fnic->state = FNIC_IN_FC_TRANS_ETH_MODE; + vnic_dev_del_addr(fnic->vdev, fnic->data_src_addr); + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + + err = fnic_fw_reset_handler(fnic); + if (err) { + spin_lock_irqsave(&fnic->fnic_lock, flags); + if (fnic->state == FNIC_IN_FC_TRANS_ETH_MODE) + fnic->state = old_state; + fnic->remove_wait = NULL; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + return; + } + + /* Wait for firmware reset to complete */ + wait_for_completion_timeout(&remove_wait, + msecs_to_jiffies(FNIC_RMDEVICE_TIMEOUT)); + + spin_lock_irqsave(&fnic->fnic_lock, flags); + fnic->remove_wait = NULL; + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "fnic_scsi_abort_io %s\n", + (fnic->state == FNIC_IN_ETH_MODE) ? + "SUCCESS" : "FAILED"); + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + +} + +/* + * This fxn called from libFC to clean up driver IO state on link down + */ +void fnic_scsi_cleanup(struct fc_lport *lp) +{ + unsigned long flags; + enum fnic_state old_state; + struct fnic *fnic = lport_priv(lp); + + /* issue fw reset */ + spin_lock_irqsave(&fnic->fnic_lock, flags); + old_state = fnic->state; + fnic->state = FNIC_IN_FC_TRANS_ETH_MODE; + vnic_dev_del_addr(fnic->vdev, fnic->data_src_addr); + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + + if (fnic_fw_reset_handler(fnic)) { + spin_lock_irqsave(&fnic->fnic_lock, flags); + if (fnic->state == FNIC_IN_FC_TRANS_ETH_MODE) + fnic->state = old_state; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + } + +} + +void fnic_empty_scsi_cleanup(struct fc_lport *lp) +{ +} + +void fnic_exch_mgr_reset(struct fc_lport *lp, u32 sid, u32 did) +{ + struct fnic *fnic = lport_priv(lp); + + /* Non-zero sid, nothing to do */ + if (sid) + goto call_fc_exch_mgr_reset; + + if (did) { + fnic_rport_exch_reset(fnic, did); + goto call_fc_exch_mgr_reset; + } + + /* + * sid = 0, did = 0 + * link down or device being removed + */ + if (!fnic->in_remove) + fnic_scsi_cleanup(lp); + else + fnic_scsi_abort_io(lp); + + /* call libFC exch mgr reset to reset its exchanges */ +call_fc_exch_mgr_reset: + fc_exch_mgr_reset(lp, sid, did); + +} diff --git a/drivers/scsi/fnic/rq_enet_desc.h b/drivers/scsi/fnic/rq_enet_desc.h new file mode 100644 index 000000000000..92e80ae6b725 --- /dev/null +++ b/drivers/scsi/fnic/rq_enet_desc.h @@ -0,0 +1,58 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _RQ_ENET_DESC_H_ +#define _RQ_ENET_DESC_H_ + +/* Ethernet receive queue descriptor: 16B */ +struct rq_enet_desc { + __le64 address; + __le16 length_type; + u8 reserved[6]; +}; + +enum rq_enet_type_types { + RQ_ENET_TYPE_ONLY_SOP = 0, + RQ_ENET_TYPE_NOT_SOP = 1, + RQ_ENET_TYPE_RESV2 = 2, + RQ_ENET_TYPE_RESV3 = 3, +}; + +#define RQ_ENET_ADDR_BITS 64 +#define RQ_ENET_LEN_BITS 14 +#define RQ_ENET_LEN_MASK ((1 << RQ_ENET_LEN_BITS) - 1) +#define RQ_ENET_TYPE_BITS 2 +#define RQ_ENET_TYPE_MASK ((1 << RQ_ENET_TYPE_BITS) - 1) + +static inline void rq_enet_desc_enc(struct rq_enet_desc *desc, + u64 address, u8 type, u16 length) +{ + desc->address = cpu_to_le64(address); + desc->length_type = cpu_to_le16((length & RQ_ENET_LEN_MASK) | + ((type & RQ_ENET_TYPE_MASK) << RQ_ENET_LEN_BITS)); +} + +static inline void rq_enet_desc_dec(struct rq_enet_desc *desc, + u64 *address, u8 *type, u16 *length) +{ + *address = le64_to_cpu(desc->address); + *length = le16_to_cpu(desc->length_type) & RQ_ENET_LEN_MASK; + *type = (u8)((le16_to_cpu(desc->length_type) >> RQ_ENET_LEN_BITS) & + RQ_ENET_TYPE_MASK); +} + +#endif /* _RQ_ENET_DESC_H_ */ diff --git a/drivers/scsi/fnic/vnic_cq.c b/drivers/scsi/fnic/vnic_cq.c new file mode 100644 index 000000000000..c5db32eda5ef --- /dev/null +++ b/drivers/scsi/fnic/vnic_cq.c @@ -0,0 +1,85 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#include +#include +#include +#include "vnic_dev.h" +#include "vnic_cq.h" + +void vnic_cq_free(struct vnic_cq *cq) +{ + vnic_dev_free_desc_ring(cq->vdev, &cq->ring); + + cq->ctrl = NULL; +} + +int vnic_cq_alloc(struct vnic_dev *vdev, struct vnic_cq *cq, unsigned int index, + unsigned int desc_count, unsigned int desc_size) +{ + int err; + + cq->index = index; + cq->vdev = vdev; + + cq->ctrl = vnic_dev_get_res(vdev, RES_TYPE_CQ, index); + if (!cq->ctrl) { + printk(KERN_ERR "Failed to hook CQ[%d] resource\n", index); + return -EINVAL; + } + + err = vnic_dev_alloc_desc_ring(vdev, &cq->ring, desc_count, desc_size); + if (err) + return err; + + return 0; +} + +void vnic_cq_init(struct vnic_cq *cq, unsigned int flow_control_enable, + unsigned int color_enable, unsigned int cq_head, unsigned int cq_tail, + unsigned int cq_tail_color, unsigned int interrupt_enable, + unsigned int cq_entry_enable, unsigned int cq_message_enable, + unsigned int interrupt_offset, u64 cq_message_addr) +{ + u64 paddr; + + paddr = (u64)cq->ring.base_addr | VNIC_PADDR_TARGET; + writeq(paddr, &cq->ctrl->ring_base); + iowrite32(cq->ring.desc_count, &cq->ctrl->ring_size); + iowrite32(flow_control_enable, &cq->ctrl->flow_control_enable); + iowrite32(color_enable, &cq->ctrl->color_enable); + iowrite32(cq_head, &cq->ctrl->cq_head); + iowrite32(cq_tail, &cq->ctrl->cq_tail); + iowrite32(cq_tail_color, &cq->ctrl->cq_tail_color); + iowrite32(interrupt_enable, &cq->ctrl->interrupt_enable); + iowrite32(cq_entry_enable, &cq->ctrl->cq_entry_enable); + iowrite32(cq_message_enable, &cq->ctrl->cq_message_enable); + iowrite32(interrupt_offset, &cq->ctrl->interrupt_offset); + writeq(cq_message_addr, &cq->ctrl->cq_message_addr); +} + +void vnic_cq_clean(struct vnic_cq *cq) +{ + cq->to_clean = 0; + cq->last_color = 0; + + iowrite32(0, &cq->ctrl->cq_head); + iowrite32(0, &cq->ctrl->cq_tail); + iowrite32(1, &cq->ctrl->cq_tail_color); + + vnic_dev_clear_desc_ring(&cq->ring); +} diff --git a/drivers/scsi/fnic/vnic_cq.h b/drivers/scsi/fnic/vnic_cq.h new file mode 100644 index 000000000000..4ede6809fb1e --- /dev/null +++ b/drivers/scsi/fnic/vnic_cq.h @@ -0,0 +1,121 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _VNIC_CQ_H_ +#define _VNIC_CQ_H_ + +#include "cq_desc.h" +#include "vnic_dev.h" + +/* + * These defines avoid symbol clash between fnic and enic (Cisco 10G Eth + * Driver) when both are built with CONFIG options =y + */ +#define vnic_cq_service fnic_cq_service +#define vnic_cq_free fnic_cq_free +#define vnic_cq_alloc fnic_cq_alloc +#define vnic_cq_init fnic_cq_init +#define vnic_cq_clean fnic_cq_clean + +/* Completion queue control */ +struct vnic_cq_ctrl { + u64 ring_base; /* 0x00 */ + u32 ring_size; /* 0x08 */ + u32 pad0; + u32 flow_control_enable; /* 0x10 */ + u32 pad1; + u32 color_enable; /* 0x18 */ + u32 pad2; + u32 cq_head; /* 0x20 */ + u32 pad3; + u32 cq_tail; /* 0x28 */ + u32 pad4; + u32 cq_tail_color; /* 0x30 */ + u32 pad5; + u32 interrupt_enable; /* 0x38 */ + u32 pad6; + u32 cq_entry_enable; /* 0x40 */ + u32 pad7; + u32 cq_message_enable; /* 0x48 */ + u32 pad8; + u32 interrupt_offset; /* 0x50 */ + u32 pad9; + u64 cq_message_addr; /* 0x58 */ + u32 pad10; +}; + +struct vnic_cq { + unsigned int index; + struct vnic_dev *vdev; + struct vnic_cq_ctrl __iomem *ctrl; /* memory-mapped */ + struct vnic_dev_ring ring; + unsigned int to_clean; + unsigned int last_color; +}; + +static inline unsigned int vnic_cq_service(struct vnic_cq *cq, + unsigned int work_to_do, + int (*q_service)(struct vnic_dev *vdev, struct cq_desc *cq_desc, + u8 type, u16 q_number, u16 completed_index, void *opaque), + void *opaque) +{ + struct cq_desc *cq_desc; + unsigned int work_done = 0; + u16 q_number, completed_index; + u8 type, color; + + cq_desc = (struct cq_desc *)((u8 *)cq->ring.descs + + cq->ring.desc_size * cq->to_clean); + cq_desc_dec(cq_desc, &type, &color, + &q_number, &completed_index); + + while (color != cq->last_color) { + + if ((*q_service)(cq->vdev, cq_desc, type, + q_number, completed_index, opaque)) + break; + + cq->to_clean++; + if (cq->to_clean == cq->ring.desc_count) { + cq->to_clean = 0; + cq->last_color = cq->last_color ? 0 : 1; + } + + cq_desc = (struct cq_desc *)((u8 *)cq->ring.descs + + cq->ring.desc_size * cq->to_clean); + cq_desc_dec(cq_desc, &type, &color, + &q_number, &completed_index); + + work_done++; + if (work_done >= work_to_do) + break; + } + + return work_done; +} + +void vnic_cq_free(struct vnic_cq *cq); +int vnic_cq_alloc(struct vnic_dev *vdev, struct vnic_cq *cq, unsigned int index, + unsigned int desc_count, unsigned int desc_size); +void vnic_cq_init(struct vnic_cq *cq, unsigned int flow_control_enable, + unsigned int color_enable, unsigned int cq_head, unsigned int cq_tail, + unsigned int cq_tail_color, unsigned int interrupt_enable, + unsigned int cq_entry_enable, unsigned int message_enable, + unsigned int interrupt_offset, u64 message_addr); +void vnic_cq_clean(struct vnic_cq *cq); + +#endif /* _VNIC_CQ_H_ */ diff --git a/drivers/scsi/fnic/vnic_cq_copy.h b/drivers/scsi/fnic/vnic_cq_copy.h new file mode 100644 index 000000000000..7901ce255a81 --- /dev/null +++ b/drivers/scsi/fnic/vnic_cq_copy.h @@ -0,0 +1,62 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _VNIC_CQ_COPY_H_ +#define _VNIC_CQ_COPY_H_ + +#include "fcpio.h" + +static inline unsigned int vnic_cq_copy_service( + struct vnic_cq *cq, + int (*q_service)(struct vnic_dev *vdev, + unsigned int index, + struct fcpio_fw_req *desc), + unsigned int work_to_do) + +{ + struct fcpio_fw_req *desc; + unsigned int work_done = 0; + u8 color; + + desc = (struct fcpio_fw_req *)((u8 *)cq->ring.descs + + cq->ring.desc_size * cq->to_clean); + fcpio_color_dec(desc, &color); + + while (color != cq->last_color) { + + if ((*q_service)(cq->vdev, cq->index, desc)) + break; + + cq->to_clean++; + if (cq->to_clean == cq->ring.desc_count) { + cq->to_clean = 0; + cq->last_color = cq->last_color ? 0 : 1; + } + + desc = (struct fcpio_fw_req *)((u8 *)cq->ring.descs + + cq->ring.desc_size * cq->to_clean); + fcpio_color_dec(desc, &color); + + work_done++; + if (work_done >= work_to_do) + break; + } + + return work_done; +} + +#endif /* _VNIC_CQ_COPY_H_ */ diff --git a/drivers/scsi/fnic/vnic_dev.c b/drivers/scsi/fnic/vnic_dev.c new file mode 100644 index 000000000000..566770645086 --- /dev/null +++ b/drivers/scsi/fnic/vnic_dev.c @@ -0,0 +1,690 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include +#include +#include +#include +#include +#include +#include "vnic_resource.h" +#include "vnic_devcmd.h" +#include "vnic_dev.h" +#include "vnic_stats.h" + +struct vnic_res { + void __iomem *vaddr; + unsigned int count; +}; + +struct vnic_dev { + void *priv; + struct pci_dev *pdev; + struct vnic_res res[RES_TYPE_MAX]; + enum vnic_dev_intr_mode intr_mode; + struct vnic_devcmd __iomem *devcmd; + struct vnic_devcmd_notify *notify; + struct vnic_devcmd_notify notify_copy; + dma_addr_t notify_pa; + u32 *linkstatus; + dma_addr_t linkstatus_pa; + struct vnic_stats *stats; + dma_addr_t stats_pa; + struct vnic_devcmd_fw_info *fw_info; + dma_addr_t fw_info_pa; +}; + +#define VNIC_MAX_RES_HDR_SIZE \ + (sizeof(struct vnic_resource_header) + \ + sizeof(struct vnic_resource) * RES_TYPE_MAX) +#define VNIC_RES_STRIDE 128 + +void *vnic_dev_priv(struct vnic_dev *vdev) +{ + return vdev->priv; +} + +static int vnic_dev_discover_res(struct vnic_dev *vdev, + struct vnic_dev_bar *bar) +{ + struct vnic_resource_header __iomem *rh; + struct vnic_resource __iomem *r; + u8 type; + + if (bar->len < VNIC_MAX_RES_HDR_SIZE) { + printk(KERN_ERR "vNIC BAR0 res hdr length error\n"); + return -EINVAL; + } + + rh = bar->vaddr; + if (!rh) { + printk(KERN_ERR "vNIC BAR0 res hdr not mem-mapped\n"); + return -EINVAL; + } + + if (ioread32(&rh->magic) != VNIC_RES_MAGIC || + ioread32(&rh->version) != VNIC_RES_VERSION) { + printk(KERN_ERR "vNIC BAR0 res magic/version error " + "exp (%lx/%lx) curr (%x/%x)\n", + VNIC_RES_MAGIC, VNIC_RES_VERSION, + ioread32(&rh->magic), ioread32(&rh->version)); + return -EINVAL; + } + + r = (struct vnic_resource __iomem *)(rh + 1); + + while ((type = ioread8(&r->type)) != RES_TYPE_EOL) { + + u8 bar_num = ioread8(&r->bar); + u32 bar_offset = ioread32(&r->bar_offset); + u32 count = ioread32(&r->count); + u32 len; + + r++; + + if (bar_num != 0) /* only mapping in BAR0 resources */ + continue; + + switch (type) { + case RES_TYPE_WQ: + case RES_TYPE_RQ: + case RES_TYPE_CQ: + case RES_TYPE_INTR_CTRL: + /* each count is stride bytes long */ + len = count * VNIC_RES_STRIDE; + if (len + bar_offset > bar->len) { + printk(KERN_ERR "vNIC BAR0 resource %d " + "out-of-bounds, offset 0x%x + " + "size 0x%x > bar len 0x%lx\n", + type, bar_offset, + len, + bar->len); + return -EINVAL; + } + break; + case RES_TYPE_INTR_PBA_LEGACY: + case RES_TYPE_DEVCMD: + len = count; + break; + default: + continue; + } + + vdev->res[type].count = count; + vdev->res[type].vaddr = (char __iomem *)bar->vaddr + bar_offset; + } + + return 0; +} + +unsigned int vnic_dev_get_res_count(struct vnic_dev *vdev, + enum vnic_res_type type) +{ + return vdev->res[type].count; +} + +void __iomem *vnic_dev_get_res(struct vnic_dev *vdev, enum vnic_res_type type, + unsigned int index) +{ + if (!vdev->res[type].vaddr) + return NULL; + + switch (type) { + case RES_TYPE_WQ: + case RES_TYPE_RQ: + case RES_TYPE_CQ: + case RES_TYPE_INTR_CTRL: + return (char __iomem *)vdev->res[type].vaddr + + index * VNIC_RES_STRIDE; + default: + return (char __iomem *)vdev->res[type].vaddr; + } +} + +unsigned int vnic_dev_desc_ring_size(struct vnic_dev_ring *ring, + unsigned int desc_count, + unsigned int desc_size) +{ + /* The base address of the desc rings must be 512 byte aligned. + * Descriptor count is aligned to groups of 32 descriptors. A + * count of 0 means the maximum 4096 descriptors. Descriptor + * size is aligned to 16 bytes. + */ + + unsigned int count_align = 32; + unsigned int desc_align = 16; + + ring->base_align = 512; + + if (desc_count == 0) + desc_count = 4096; + + ring->desc_count = ALIGN(desc_count, count_align); + + ring->desc_size = ALIGN(desc_size, desc_align); + + ring->size = ring->desc_count * ring->desc_size; + ring->size_unaligned = ring->size + ring->base_align; + + return ring->size_unaligned; +} + +void vnic_dev_clear_desc_ring(struct vnic_dev_ring *ring) +{ + memset(ring->descs, 0, ring->size); +} + +int vnic_dev_alloc_desc_ring(struct vnic_dev *vdev, struct vnic_dev_ring *ring, + unsigned int desc_count, unsigned int desc_size) +{ + vnic_dev_desc_ring_size(ring, desc_count, desc_size); + + ring->descs_unaligned = pci_alloc_consistent(vdev->pdev, + ring->size_unaligned, + &ring->base_addr_unaligned); + + if (!ring->descs_unaligned) { + printk(KERN_ERR + "Failed to allocate ring (size=%d), aborting\n", + (int)ring->size); + return -ENOMEM; + } + + ring->base_addr = ALIGN(ring->base_addr_unaligned, + ring->base_align); + ring->descs = (u8 *)ring->descs_unaligned + + (ring->base_addr - ring->base_addr_unaligned); + + vnic_dev_clear_desc_ring(ring); + + ring->desc_avail = ring->desc_count - 1; + + return 0; +} + +void vnic_dev_free_desc_ring(struct vnic_dev *vdev, struct vnic_dev_ring *ring) +{ + if (ring->descs) { + pci_free_consistent(vdev->pdev, + ring->size_unaligned, + ring->descs_unaligned, + ring->base_addr_unaligned); + ring->descs = NULL; + } +} + +int vnic_dev_cmd(struct vnic_dev *vdev, enum vnic_devcmd_cmd cmd, + u64 *a0, u64 *a1, int wait) +{ + struct vnic_devcmd __iomem *devcmd = vdev->devcmd; + int delay; + u32 status; + int dev_cmd_err[] = { + /* convert from fw's version of error.h to host's version */ + 0, /* ERR_SUCCESS */ + EINVAL, /* ERR_EINVAL */ + EFAULT, /* ERR_EFAULT */ + EPERM, /* ERR_EPERM */ + EBUSY, /* ERR_EBUSY */ + }; + int err; + + status = ioread32(&devcmd->status); + if (status & STAT_BUSY) { + printk(KERN_ERR "Busy devcmd %d\n", _CMD_N(cmd)); + return -EBUSY; + } + + if (_CMD_DIR(cmd) & _CMD_DIR_WRITE) { + writeq(*a0, &devcmd->args[0]); + writeq(*a1, &devcmd->args[1]); + wmb(); + } + + iowrite32(cmd, &devcmd->cmd); + + if ((_CMD_FLAGS(cmd) & _CMD_FLAGS_NOWAIT)) + return 0; + + for (delay = 0; delay < wait; delay++) { + + udelay(100); + + status = ioread32(&devcmd->status); + if (!(status & STAT_BUSY)) { + + if (status & STAT_ERROR) { + err = dev_cmd_err[(int)readq(&devcmd->args[0])]; + printk(KERN_ERR "Error %d devcmd %d\n", + err, _CMD_N(cmd)); + return -err; + } + + if (_CMD_DIR(cmd) & _CMD_DIR_READ) { + rmb(); + *a0 = readq(&devcmd->args[0]); + *a1 = readq(&devcmd->args[1]); + } + + return 0; + } + } + + printk(KERN_ERR "Timedout devcmd %d\n", _CMD_N(cmd)); + return -ETIMEDOUT; +} + +int vnic_dev_fw_info(struct vnic_dev *vdev, + struct vnic_devcmd_fw_info **fw_info) +{ + u64 a0, a1 = 0; + int wait = 1000; + int err = 0; + + if (!vdev->fw_info) { + vdev->fw_info = pci_alloc_consistent(vdev->pdev, + sizeof(struct vnic_devcmd_fw_info), + &vdev->fw_info_pa); + if (!vdev->fw_info) + return -ENOMEM; + + a0 = vdev->fw_info_pa; + + /* only get fw_info once and cache it */ + err = vnic_dev_cmd(vdev, CMD_MCPU_FW_INFO, &a0, &a1, wait); + } + + *fw_info = vdev->fw_info; + + return err; +} + +int vnic_dev_spec(struct vnic_dev *vdev, unsigned int offset, unsigned int size, + void *value) +{ + u64 a0, a1; + int wait = 1000; + int err; + + a0 = offset; + a1 = size; + + err = vnic_dev_cmd(vdev, CMD_DEV_SPEC, &a0, &a1, wait); + + switch (size) { + case 1: + *(u8 *)value = (u8)a0; + break; + case 2: + *(u16 *)value = (u16)a0; + break; + case 4: + *(u32 *)value = (u32)a0; + break; + case 8: + *(u64 *)value = a0; + break; + default: + BUG(); + break; + } + + return err; +} + +int vnic_dev_stats_clear(struct vnic_dev *vdev) +{ + u64 a0 = 0, a1 = 0; + int wait = 1000; + return vnic_dev_cmd(vdev, CMD_STATS_CLEAR, &a0, &a1, wait); +} + +int vnic_dev_stats_dump(struct vnic_dev *vdev, struct vnic_stats **stats) +{ + u64 a0, a1; + int wait = 1000; + + if (!vdev->stats) { + vdev->stats = pci_alloc_consistent(vdev->pdev, + sizeof(struct vnic_stats), &vdev->stats_pa); + if (!vdev->stats) + return -ENOMEM; + } + + *stats = vdev->stats; + a0 = vdev->stats_pa; + a1 = sizeof(struct vnic_stats); + + return vnic_dev_cmd(vdev, CMD_STATS_DUMP, &a0, &a1, wait); +} + +int vnic_dev_close(struct vnic_dev *vdev) +{ + u64 a0 = 0, a1 = 0; + int wait = 1000; + return vnic_dev_cmd(vdev, CMD_CLOSE, &a0, &a1, wait); +} + +int vnic_dev_enable(struct vnic_dev *vdev) +{ + u64 a0 = 0, a1 = 0; + int wait = 1000; + return vnic_dev_cmd(vdev, CMD_ENABLE, &a0, &a1, wait); +} + +int vnic_dev_disable(struct vnic_dev *vdev) +{ + u64 a0 = 0, a1 = 0; + int wait = 1000; + return vnic_dev_cmd(vdev, CMD_DISABLE, &a0, &a1, wait); +} + +int vnic_dev_open(struct vnic_dev *vdev, int arg) +{ + u64 a0 = (u32)arg, a1 = 0; + int wait = 1000; + return vnic_dev_cmd(vdev, CMD_OPEN, &a0, &a1, wait); +} + +int vnic_dev_open_done(struct vnic_dev *vdev, int *done) +{ + u64 a0 = 0, a1 = 0; + int wait = 1000; + int err; + + *done = 0; + + err = vnic_dev_cmd(vdev, CMD_OPEN_STATUS, &a0, &a1, wait); + if (err) + return err; + + *done = (a0 == 0); + + return 0; +} + +int vnic_dev_soft_reset(struct vnic_dev *vdev, int arg) +{ + u64 a0 = (u32)arg, a1 = 0; + int wait = 1000; + return vnic_dev_cmd(vdev, CMD_SOFT_RESET, &a0, &a1, wait); +} + +int vnic_dev_soft_reset_done(struct vnic_dev *vdev, int *done) +{ + u64 a0 = 0, a1 = 0; + int wait = 1000; + int err; + + *done = 0; + + err = vnic_dev_cmd(vdev, CMD_SOFT_RESET_STATUS, &a0, &a1, wait); + if (err) + return err; + + *done = (a0 == 0); + + return 0; +} + +int vnic_dev_hang_notify(struct vnic_dev *vdev) +{ + u64 a0, a1; + int wait = 1000; + return vnic_dev_cmd(vdev, CMD_HANG_NOTIFY, &a0, &a1, wait); +} + +int vnic_dev_mac_addr(struct vnic_dev *vdev, u8 *mac_addr) +{ + u64 a0, a1; + int wait = 1000; + int err, i; + + for (i = 0; i < ETH_ALEN; i++) + mac_addr[i] = 0; + + err = vnic_dev_cmd(vdev, CMD_MAC_ADDR, &a0, &a1, wait); + if (err) + return err; + + for (i = 0; i < ETH_ALEN; i++) + mac_addr[i] = ((u8 *)&a0)[i]; + + return 0; +} + +void vnic_dev_packet_filter(struct vnic_dev *vdev, int directed, int multicast, + int broadcast, int promisc, int allmulti) +{ + u64 a0, a1 = 0; + int wait = 1000; + int err; + + a0 = (directed ? CMD_PFILTER_DIRECTED : 0) | + (multicast ? CMD_PFILTER_MULTICAST : 0) | + (broadcast ? CMD_PFILTER_BROADCAST : 0) | + (promisc ? CMD_PFILTER_PROMISCUOUS : 0) | + (allmulti ? CMD_PFILTER_ALL_MULTICAST : 0); + + err = vnic_dev_cmd(vdev, CMD_PACKET_FILTER, &a0, &a1, wait); + if (err) + printk(KERN_ERR "Can't set packet filter\n"); +} + +void vnic_dev_add_addr(struct vnic_dev *vdev, u8 *addr) +{ + u64 a0 = 0, a1 = 0; + int wait = 1000; + int err; + int i; + + for (i = 0; i < ETH_ALEN; i++) + ((u8 *)&a0)[i] = addr[i]; + + err = vnic_dev_cmd(vdev, CMD_ADDR_ADD, &a0, &a1, wait); + if (err) + printk(KERN_ERR + "Can't add addr [%02x:%02x:%02x:%02x:%02x:%02x], %d\n", + addr[0], addr[1], addr[2], addr[3], addr[4], addr[5], + err); +} + +void vnic_dev_del_addr(struct vnic_dev *vdev, u8 *addr) +{ + u64 a0 = 0, a1 = 0; + int wait = 1000; + int err; + int i; + + for (i = 0; i < ETH_ALEN; i++) + ((u8 *)&a0)[i] = addr[i]; + + err = vnic_dev_cmd(vdev, CMD_ADDR_DEL, &a0, &a1, wait); + if (err) + printk(KERN_ERR + "Can't del addr [%02x:%02x:%02x:%02x:%02x:%02x], %d\n", + addr[0], addr[1], addr[2], addr[3], addr[4], addr[5], + err); +} + +int vnic_dev_notify_set(struct vnic_dev *vdev, u16 intr) +{ + u64 a0, a1; + int wait = 1000; + + if (!vdev->notify) { + vdev->notify = pci_alloc_consistent(vdev->pdev, + sizeof(struct vnic_devcmd_notify), + &vdev->notify_pa); + if (!vdev->notify) + return -ENOMEM; + } + + a0 = vdev->notify_pa; + a1 = ((u64)intr << 32) & 0x0000ffff00000000ULL; + a1 += sizeof(struct vnic_devcmd_notify); + + return vnic_dev_cmd(vdev, CMD_NOTIFY, &a0, &a1, wait); +} + +void vnic_dev_notify_unset(struct vnic_dev *vdev) +{ + u64 a0, a1; + int wait = 1000; + + a0 = 0; /* paddr = 0 to unset notify buffer */ + a1 = 0x0000ffff00000000ULL; /* intr num = -1 to unreg for intr */ + a1 += sizeof(struct vnic_devcmd_notify); + + vnic_dev_cmd(vdev, CMD_NOTIFY, &a0, &a1, wait); +} + +static int vnic_dev_notify_ready(struct vnic_dev *vdev) +{ + u32 *words; + unsigned int nwords = sizeof(struct vnic_devcmd_notify) / 4; + unsigned int i; + u32 csum; + + if (!vdev->notify) + return 0; + + do { + csum = 0; + memcpy(&vdev->notify_copy, vdev->notify, + sizeof(struct vnic_devcmd_notify)); + words = (u32 *)&vdev->notify_copy; + for (i = 1; i < nwords; i++) + csum += words[i]; + } while (csum != words[0]); + + return 1; +} + +int vnic_dev_init(struct vnic_dev *vdev, int arg) +{ + u64 a0 = (u32)arg, a1 = 0; + int wait = 1000; + return vnic_dev_cmd(vdev, CMD_INIT, &a0, &a1, wait); +} + +int vnic_dev_link_status(struct vnic_dev *vdev) +{ + if (vdev->linkstatus) + return *vdev->linkstatus; + + if (!vnic_dev_notify_ready(vdev)) + return 0; + + return vdev->notify_copy.link_state; +} + +u32 vnic_dev_port_speed(struct vnic_dev *vdev) +{ + if (!vnic_dev_notify_ready(vdev)) + return 0; + + return vdev->notify_copy.port_speed; +} + +u32 vnic_dev_msg_lvl(struct vnic_dev *vdev) +{ + if (!vnic_dev_notify_ready(vdev)) + return 0; + + return vdev->notify_copy.msglvl; +} + +u32 vnic_dev_mtu(struct vnic_dev *vdev) +{ + if (!vnic_dev_notify_ready(vdev)) + return 0; + + return vdev->notify_copy.mtu; +} + +u32 vnic_dev_link_down_cnt(struct vnic_dev *vdev) +{ + if (!vnic_dev_notify_ready(vdev)) + return 0; + + return vdev->notify_copy.link_down_cnt; +} + +void vnic_dev_set_intr_mode(struct vnic_dev *vdev, + enum vnic_dev_intr_mode intr_mode) +{ + vdev->intr_mode = intr_mode; +} + +enum vnic_dev_intr_mode vnic_dev_get_intr_mode( + struct vnic_dev *vdev) +{ + return vdev->intr_mode; +} + +void vnic_dev_unregister(struct vnic_dev *vdev) +{ + if (vdev) { + if (vdev->notify) + pci_free_consistent(vdev->pdev, + sizeof(struct vnic_devcmd_notify), + vdev->notify, + vdev->notify_pa); + if (vdev->linkstatus) + pci_free_consistent(vdev->pdev, + sizeof(u32), + vdev->linkstatus, + vdev->linkstatus_pa); + if (vdev->stats) + pci_free_consistent(vdev->pdev, + sizeof(struct vnic_dev), + vdev->stats, vdev->stats_pa); + if (vdev->fw_info) + pci_free_consistent(vdev->pdev, + sizeof(struct vnic_devcmd_fw_info), + vdev->fw_info, vdev->fw_info_pa); + kfree(vdev); + } +} + +struct vnic_dev *vnic_dev_register(struct vnic_dev *vdev, + void *priv, struct pci_dev *pdev, struct vnic_dev_bar *bar) +{ + if (!vdev) { + vdev = kzalloc(sizeof(struct vnic_dev), GFP_KERNEL); + if (!vdev) + return NULL; + } + + vdev->priv = priv; + vdev->pdev = pdev; + + if (vnic_dev_discover_res(vdev, bar)) + goto err_out; + + vdev->devcmd = vnic_dev_get_res(vdev, RES_TYPE_DEVCMD, 0); + if (!vdev->devcmd) + goto err_out; + + return vdev; + +err_out: + vnic_dev_unregister(vdev); + return NULL; +} diff --git a/drivers/scsi/fnic/vnic_dev.h b/drivers/scsi/fnic/vnic_dev.h new file mode 100644 index 000000000000..f9935a8a5a09 --- /dev/null +++ b/drivers/scsi/fnic/vnic_dev.h @@ -0,0 +1,161 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _VNIC_DEV_H_ +#define _VNIC_DEV_H_ + +#include "vnic_resource.h" +#include "vnic_devcmd.h" + +/* + * These defines avoid symbol clash between fnic and enic (Cisco 10G Eth + * Driver) when both are built with CONFIG options =y + */ +#define vnic_dev_priv fnic_dev_priv +#define vnic_dev_get_res_count fnic_dev_get_res_count +#define vnic_dev_get_res fnic_dev_get_res +#define vnic_dev_desc_ring_size fnic_dev_desc_ring_siz +#define vnic_dev_clear_desc_ring fnic_dev_clear_desc_ring +#define vnic_dev_alloc_desc_ring fnic_dev_alloc_desc_ring +#define vnic_dev_free_desc_ring fnic_dev_free_desc_ring +#define vnic_dev_cmd fnic_dev_cmd +#define vnic_dev_fw_info fnic_dev_fw_info +#define vnic_dev_spec fnic_dev_spec +#define vnic_dev_stats_clear fnic_dev_stats_clear +#define vnic_dev_stats_dump fnic_dev_stats_dump +#define vnic_dev_hang_notify fnic_dev_hang_notify +#define vnic_dev_packet_filter fnic_dev_packet_filter +#define vnic_dev_add_addr fnic_dev_add_addr +#define vnic_dev_del_addr fnic_dev_del_addr +#define vnic_dev_mac_addr fnic_dev_mac_addr +#define vnic_dev_notify_set fnic_dev_notify_set +#define vnic_dev_notify_unset fnic_dev_notify_unset +#define vnic_dev_link_status fnic_dev_link_status +#define vnic_dev_port_speed fnic_dev_port_speed +#define vnic_dev_msg_lvl fnic_dev_msg_lvl +#define vnic_dev_mtu fnic_dev_mtu +#define vnic_dev_link_down_cnt fnic_dev_link_down_cnt +#define vnic_dev_close fnic_dev_close +#define vnic_dev_enable fnic_dev_enable +#define vnic_dev_disable fnic_dev_disable +#define vnic_dev_open fnic_dev_open +#define vnic_dev_open_done fnic_dev_open_done +#define vnic_dev_init fnic_dev_init +#define vnic_dev_soft_reset fnic_dev_soft_reset +#define vnic_dev_soft_reset_done fnic_dev_soft_reset_done +#define vnic_dev_set_intr_mode fnic_dev_set_intr_mode +#define vnic_dev_get_intr_mode fnic_dev_get_intr_mode +#define vnic_dev_unregister fnic_dev_unregister +#define vnic_dev_register fnic_dev_register + +#ifndef VNIC_PADDR_TARGET +#define VNIC_PADDR_TARGET 0x0000000000000000ULL +#endif + +#ifndef readq +static inline u64 readq(void __iomem *reg) +{ + return ((u64)readl(reg + 0x4UL) << 32) | (u64)readl(reg); +} + +static inline void writeq(u64 val, void __iomem *reg) +{ + writel(val & 0xffffffff, reg); + writel(val >> 32, reg + 0x4UL); +} +#endif + +enum vnic_dev_intr_mode { + VNIC_DEV_INTR_MODE_UNKNOWN, + VNIC_DEV_INTR_MODE_INTX, + VNIC_DEV_INTR_MODE_MSI, + VNIC_DEV_INTR_MODE_MSIX, +}; + +struct vnic_dev_bar { + void __iomem *vaddr; + dma_addr_t bus_addr; + unsigned long len; +}; + +struct vnic_dev_ring { + void *descs; + size_t size; + dma_addr_t base_addr; + size_t base_align; + void *descs_unaligned; + size_t size_unaligned; + dma_addr_t base_addr_unaligned; + unsigned int desc_size; + unsigned int desc_count; + unsigned int desc_avail; +}; + +struct vnic_dev; +struct vnic_stats; + +void *vnic_dev_priv(struct vnic_dev *vdev); +unsigned int vnic_dev_get_res_count(struct vnic_dev *vdev, + enum vnic_res_type type); +void __iomem *vnic_dev_get_res(struct vnic_dev *vdev, enum vnic_res_type type, + unsigned int index); +unsigned int vnic_dev_desc_ring_size(struct vnic_dev_ring *ring, + unsigned int desc_count, + unsigned int desc_size); +void vnic_dev_clear_desc_ring(struct vnic_dev_ring *ring); +int vnic_dev_alloc_desc_ring(struct vnic_dev *vdev, struct vnic_dev_ring *ring, + unsigned int desc_count, unsigned int desc_size); +void vnic_dev_free_desc_ring(struct vnic_dev *vdev, + struct vnic_dev_ring *ring); +int vnic_dev_cmd(struct vnic_dev *vdev, enum vnic_devcmd_cmd cmd, + u64 *a0, u64 *a1, int wait); +int vnic_dev_fw_info(struct vnic_dev *vdev, + struct vnic_devcmd_fw_info **fw_info); +int vnic_dev_spec(struct vnic_dev *vdev, unsigned int offset, + unsigned int size, void *value); +int vnic_dev_stats_clear(struct vnic_dev *vdev); +int vnic_dev_stats_dump(struct vnic_dev *vdev, struct vnic_stats **stats); +int vnic_dev_hang_notify(struct vnic_dev *vdev); +void vnic_dev_packet_filter(struct vnic_dev *vdev, int directed, int multicast, + int broadcast, int promisc, int allmulti); +void vnic_dev_add_addr(struct vnic_dev *vdev, u8 *addr); +void vnic_dev_del_addr(struct vnic_dev *vdev, u8 *addr); +int vnic_dev_mac_addr(struct vnic_dev *vdev, u8 *mac_addr); +int vnic_dev_notify_set(struct vnic_dev *vdev, u16 intr); +void vnic_dev_notify_unset(struct vnic_dev *vdev); +int vnic_dev_link_status(struct vnic_dev *vdev); +u32 vnic_dev_port_speed(struct vnic_dev *vdev); +u32 vnic_dev_msg_lvl(struct vnic_dev *vdev); +u32 vnic_dev_mtu(struct vnic_dev *vdev); +u32 vnic_dev_link_down_cnt(struct vnic_dev *vdev); +int vnic_dev_close(struct vnic_dev *vdev); +int vnic_dev_enable(struct vnic_dev *vdev); +int vnic_dev_disable(struct vnic_dev *vdev); +int vnic_dev_open(struct vnic_dev *vdev, int arg); +int vnic_dev_open_done(struct vnic_dev *vdev, int *done); +int vnic_dev_init(struct vnic_dev *vdev, int arg); +int vnic_dev_soft_reset(struct vnic_dev *vdev, int arg); +int vnic_dev_soft_reset_done(struct vnic_dev *vdev, int *done); +void vnic_dev_set_intr_mode(struct vnic_dev *vdev, + enum vnic_dev_intr_mode intr_mode); +enum vnic_dev_intr_mode vnic_dev_get_intr_mode(struct vnic_dev *vdev); +void vnic_dev_unregister(struct vnic_dev *vdev); +struct vnic_dev *vnic_dev_register(struct vnic_dev *vdev, + void *priv, struct pci_dev *pdev, + struct vnic_dev_bar *bar); + +#endif /* _VNIC_DEV_H_ */ diff --git a/drivers/scsi/fnic/vnic_devcmd.h b/drivers/scsi/fnic/vnic_devcmd.h new file mode 100644 index 000000000000..d62b9061bf12 --- /dev/null +++ b/drivers/scsi/fnic/vnic_devcmd.h @@ -0,0 +1,281 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _VNIC_DEVCMD_H_ +#define _VNIC_DEVCMD_H_ + +#define _CMD_NBITS 14 +#define _CMD_VTYPEBITS 10 +#define _CMD_FLAGSBITS 6 +#define _CMD_DIRBITS 2 + +#define _CMD_NMASK ((1 << _CMD_NBITS)-1) +#define _CMD_VTYPEMASK ((1 << _CMD_VTYPEBITS)-1) +#define _CMD_FLAGSMASK ((1 << _CMD_FLAGSBITS)-1) +#define _CMD_DIRMASK ((1 << _CMD_DIRBITS)-1) + +#define _CMD_NSHIFT 0 +#define _CMD_VTYPESHIFT (_CMD_NSHIFT+_CMD_NBITS) +#define _CMD_FLAGSSHIFT (_CMD_VTYPESHIFT+_CMD_VTYPEBITS) +#define _CMD_DIRSHIFT (_CMD_FLAGSSHIFT+_CMD_FLAGSBITS) + +/* + * Direction bits (from host perspective). + */ +#define _CMD_DIR_NONE 0U +#define _CMD_DIR_WRITE 1U +#define _CMD_DIR_READ 2U +#define _CMD_DIR_RW (_CMD_DIR_WRITE | _CMD_DIR_READ) + +/* + * Flag bits. + */ +#define _CMD_FLAGS_NONE 0U +#define _CMD_FLAGS_NOWAIT 1U + +/* + * vNIC type bits. + */ +#define _CMD_VTYPE_NONE 0U +#define _CMD_VTYPE_ENET 1U +#define _CMD_VTYPE_FC 2U +#define _CMD_VTYPE_SCSI 4U +#define _CMD_VTYPE_ALL (_CMD_VTYPE_ENET | _CMD_VTYPE_FC | _CMD_VTYPE_SCSI) + +/* + * Used to create cmds.. +*/ +#define _CMDCF(dir, flags, vtype, nr) \ + (((dir) << _CMD_DIRSHIFT) | \ + ((flags) << _CMD_FLAGSSHIFT) | \ + ((vtype) << _CMD_VTYPESHIFT) | \ + ((nr) << _CMD_NSHIFT)) +#define _CMDC(dir, vtype, nr) _CMDCF(dir, 0, vtype, nr) +#define _CMDCNW(dir, vtype, nr) _CMDCF(dir, _CMD_FLAGS_NOWAIT, vtype, nr) + +/* + * Used to decode cmds.. +*/ +#define _CMD_DIR(cmd) (((cmd) >> _CMD_DIRSHIFT) & _CMD_DIRMASK) +#define _CMD_FLAGS(cmd) (((cmd) >> _CMD_FLAGSSHIFT) & _CMD_FLAGSMASK) +#define _CMD_VTYPE(cmd) (((cmd) >> _CMD_VTYPESHIFT) & _CMD_VTYPEMASK) +#define _CMD_N(cmd) (((cmd) >> _CMD_NSHIFT) & _CMD_NMASK) + +enum vnic_devcmd_cmd { + CMD_NONE = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_NONE, 0), + + /* mcpu fw info in mem: (u64)a0=paddr to struct vnic_devcmd_fw_info */ + CMD_MCPU_FW_INFO = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 1), + + /* dev-specific block member: + * in: (u16)a0=offset,(u8)a1=size + * out: a0=value */ + CMD_DEV_SPEC = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 2), + + /* stats clear */ + CMD_STATS_CLEAR = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 3), + + /* stats dump in mem: (u64)a0=paddr to stats area, + * (u16)a1=sizeof stats area */ + CMD_STATS_DUMP = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 4), + + /* set Rx packet filter: (u32)a0=filters (see CMD_PFILTER_*) */ + CMD_PACKET_FILTER = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 7), + + /* hang detection notification */ + CMD_HANG_NOTIFY = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 8), + + /* MAC address in (u48)a0 */ + CMD_MAC_ADDR = _CMDC(_CMD_DIR_READ, + _CMD_VTYPE_ENET | _CMD_VTYPE_FC, 9), + + /* disable/enable promisc mode: (u8)a0=0/1 */ +/***** XXX DEPRECATED *****/ + CMD_PROMISC_MODE = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 10), + + /* disable/enable all-multi mode: (u8)a0=0/1 */ +/***** XXX DEPRECATED *****/ + CMD_ALLMULTI_MODE = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 11), + + /* add addr from (u48)a0 */ + CMD_ADDR_ADD = _CMDCNW(_CMD_DIR_WRITE, + _CMD_VTYPE_ENET | _CMD_VTYPE_FC, 12), + + /* del addr from (u48)a0 */ + CMD_ADDR_DEL = _CMDCNW(_CMD_DIR_WRITE, + _CMD_VTYPE_ENET | _CMD_VTYPE_FC, 13), + + /* add VLAN id in (u16)a0 */ + CMD_VLAN_ADD = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 14), + + /* del VLAN id in (u16)a0 */ + CMD_VLAN_DEL = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 15), + + /* nic_cfg in (u32)a0 */ + CMD_NIC_CFG = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 16), + + /* union vnic_rss_key in mem: (u64)a0=paddr, (u16)a1=len */ + CMD_RSS_KEY = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 17), + + /* union vnic_rss_cpu in mem: (u64)a0=paddr, (u16)a1=len */ + CMD_RSS_CPU = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 18), + + /* initiate softreset */ + CMD_SOFT_RESET = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 19), + + /* softreset status: + * out: a0=0 reset complete, a0=1 reset in progress */ + CMD_SOFT_RESET_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 20), + + /* set struct vnic_devcmd_notify buffer in mem: + * in: + * (u64)a0=paddr to notify (set paddr=0 to unset) + * (u32)a1 & 0x00000000ffffffff=sizeof(struct vnic_devcmd_notify) + * (u16)a1 & 0x0000ffff00000000=intr num (-1 for no intr) + * out: + * (u32)a1 = effective size + */ + CMD_NOTIFY = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 21), + + /* UNDI API: (u64)a0=paddr to s_PXENV_UNDI_ struct, + * (u8)a1=PXENV_UNDI_xxx */ + CMD_UNDI = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 22), + + /* initiate open sequence (u32)a0=flags (see CMD_OPENF_*) */ + CMD_OPEN = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 23), + + /* open status: + * out: a0=0 open complete, a0=1 open in progress */ + CMD_OPEN_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 24), + + /* close vnic */ + CMD_CLOSE = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 25), + + /* initialize virtual link: (u32)a0=flags (see CMD_INITF_*) */ + CMD_INIT = _CMDCNW(_CMD_DIR_READ, _CMD_VTYPE_ALL, 26), + + /* variant of CMD_INIT, with provisioning info + * (u64)a0=paddr of vnic_devcmd_provinfo + * (u32)a1=sizeof provision info */ + CMD_INIT_PROV_INFO = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 27), + + /* enable virtual link */ + CMD_ENABLE = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 28), + + /* disable virtual link */ + CMD_DISABLE = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 29), + + /* stats dump all vnics on uplink in mem: (u64)a0=paddr (u32)a1=uif */ + CMD_STATS_DUMP_ALL = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 30), + + /* init status: + * out: a0=0 init complete, a0=1 init in progress + * if a0=0, a1=errno */ + CMD_INIT_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 31), + + /* INT13 API: (u64)a0=paddr to vnic_int13_params struct + * (u8)a1=INT13_CMD_xxx */ + CMD_INT13 = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_FC, 32), + + /* logical uplink enable/disable: (u64)a0: 0/1=disable/enable */ + CMD_LOGICAL_UPLINK = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 33), + + /* undo initialize of virtual link */ + CMD_DEINIT = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 34), +}; + +/* flags for CMD_OPEN */ +#define CMD_OPENF_OPROM 0x1 /* open coming from option rom */ + +/* flags for CMD_INIT */ +#define CMD_INITF_DEFAULT_MAC 0x1 /* init with default mac addr */ + +/* flags for CMD_PACKET_FILTER */ +#define CMD_PFILTER_DIRECTED 0x01 +#define CMD_PFILTER_MULTICAST 0x02 +#define CMD_PFILTER_BROADCAST 0x04 +#define CMD_PFILTER_PROMISCUOUS 0x08 +#define CMD_PFILTER_ALL_MULTICAST 0x10 + +enum vnic_devcmd_status { + STAT_NONE = 0, + STAT_BUSY = 1 << 0, /* cmd in progress */ + STAT_ERROR = 1 << 1, /* last cmd caused error (code in a0) */ +}; + +enum vnic_devcmd_error { + ERR_SUCCESS = 0, + ERR_EINVAL = 1, + ERR_EFAULT = 2, + ERR_EPERM = 3, + ERR_EBUSY = 4, + ERR_ECMDUNKNOWN = 5, + ERR_EBADSTATE = 6, + ERR_ENOMEM = 7, + ERR_ETIMEDOUT = 8, + ERR_ELINKDOWN = 9, +}; + +struct vnic_devcmd_fw_info { + char fw_version[32]; + char fw_build[32]; + char hw_version[32]; + char hw_serial_number[32]; +}; + +struct vnic_devcmd_notify { + u32 csum; /* checksum over following words */ + + u32 link_state; /* link up == 1 */ + u32 port_speed; /* effective port speed (rate limit) */ + u32 mtu; /* MTU */ + u32 msglvl; /* requested driver msg lvl */ + u32 uif; /* uplink interface */ + u32 status; /* status bits (see VNIC_STF_*) */ + u32 error; /* error code (see ERR_*) for first ERR */ + u32 link_down_cnt; /* running count of link down transitions */ +}; +#define VNIC_STF_FATAL_ERR 0x0001 /* fatal fw error */ + +struct vnic_devcmd_provinfo { + u8 oui[3]; + u8 type; + u8 data[0]; +}; + +/* + * Writing cmd register causes STAT_BUSY to get set in status register. + * When cmd completes, STAT_BUSY will be cleared. + * + * If cmd completed successfully STAT_ERROR will be clear + * and args registers contain cmd-specific results. + * + * If cmd error, STAT_ERROR will be set and args[0] contains error code. + * + * status register is read-only. While STAT_BUSY is set, + * all other register contents are read-only. + */ + +/* Make sizeof(vnic_devcmd) a power-of-2 for I/O BAR. */ +#define VNIC_DEVCMD_NARGS 15 +struct vnic_devcmd { + u32 status; /* RO */ + u32 cmd; /* RW */ + u64 args[VNIC_DEVCMD_NARGS]; /* RW cmd args (little-endian) */ +}; + +#endif /* _VNIC_DEVCMD_H_ */ diff --git a/drivers/scsi/fnic/vnic_intr.c b/drivers/scsi/fnic/vnic_intr.c new file mode 100644 index 000000000000..4f4dc8793d23 --- /dev/null +++ b/drivers/scsi/fnic/vnic_intr.c @@ -0,0 +1,60 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include +#include +#include +#include +#include +#include "vnic_dev.h" +#include "vnic_intr.h" + +void vnic_intr_free(struct vnic_intr *intr) +{ + intr->ctrl = NULL; +} + +int vnic_intr_alloc(struct vnic_dev *vdev, struct vnic_intr *intr, + unsigned int index) +{ + intr->index = index; + intr->vdev = vdev; + + intr->ctrl = vnic_dev_get_res(vdev, RES_TYPE_INTR_CTRL, index); + if (!intr->ctrl) { + printk(KERN_ERR "Failed to hook INTR[%d].ctrl resource\n", + index); + return -EINVAL; + } + + return 0; +} + +void vnic_intr_init(struct vnic_intr *intr, unsigned int coalescing_timer, + unsigned int coalescing_type, unsigned int mask_on_assertion) +{ + iowrite32(coalescing_timer, &intr->ctrl->coalescing_timer); + iowrite32(coalescing_type, &intr->ctrl->coalescing_type); + iowrite32(mask_on_assertion, &intr->ctrl->mask_on_assertion); + iowrite32(0, &intr->ctrl->int_credits); +} + +void vnic_intr_clean(struct vnic_intr *intr) +{ + iowrite32(0, &intr->ctrl->int_credits); +} diff --git a/drivers/scsi/fnic/vnic_intr.h b/drivers/scsi/fnic/vnic_intr.h new file mode 100644 index 000000000000..d5fb40e7c98e --- /dev/null +++ b/drivers/scsi/fnic/vnic_intr.h @@ -0,0 +1,118 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _VNIC_INTR_H_ +#define _VNIC_INTR_H_ + +#include +#include "vnic_dev.h" + +/* + * These defines avoid symbol clash between fnic and enic (Cisco 10G Eth + * Driver) when both are built with CONFIG options =y + */ +#define vnic_intr_unmask fnic_intr_unmask +#define vnic_intr_mask fnic_intr_mask +#define vnic_intr_return_credits fnic_intr_return_credits +#define vnic_intr_credits fnic_intr_credits +#define vnic_intr_return_all_credits fnic_intr_return_all_credits +#define vnic_intr_legacy_pba fnic_intr_legacy_pba +#define vnic_intr_free fnic_intr_free +#define vnic_intr_alloc fnic_intr_alloc +#define vnic_intr_init fnic_intr_init +#define vnic_intr_clean fnic_intr_clean + +#define VNIC_INTR_TIMER_MAX 0xffff + +#define VNIC_INTR_TIMER_TYPE_ABS 0 +#define VNIC_INTR_TIMER_TYPE_QUIET 1 + +/* Interrupt control */ +struct vnic_intr_ctrl { + u32 coalescing_timer; /* 0x00 */ + u32 pad0; + u32 coalescing_value; /* 0x08 */ + u32 pad1; + u32 coalescing_type; /* 0x10 */ + u32 pad2; + u32 mask_on_assertion; /* 0x18 */ + u32 pad3; + u32 mask; /* 0x20 */ + u32 pad4; + u32 int_credits; /* 0x28 */ + u32 pad5; + u32 int_credit_return; /* 0x30 */ + u32 pad6; +}; + +struct vnic_intr { + unsigned int index; + struct vnic_dev *vdev; + struct vnic_intr_ctrl __iomem *ctrl; /* memory-mapped */ +}; + +static inline void vnic_intr_unmask(struct vnic_intr *intr) +{ + iowrite32(0, &intr->ctrl->mask); +} + +static inline void vnic_intr_mask(struct vnic_intr *intr) +{ + iowrite32(1, &intr->ctrl->mask); +} + +static inline void vnic_intr_return_credits(struct vnic_intr *intr, + unsigned int credits, int unmask, int reset_timer) +{ +#define VNIC_INTR_UNMASK_SHIFT 16 +#define VNIC_INTR_RESET_TIMER_SHIFT 17 + + u32 int_credit_return = (credits & 0xffff) | + (unmask ? (1 << VNIC_INTR_UNMASK_SHIFT) : 0) | + (reset_timer ? (1 << VNIC_INTR_RESET_TIMER_SHIFT) : 0); + + iowrite32(int_credit_return, &intr->ctrl->int_credit_return); +} + +static inline unsigned int vnic_intr_credits(struct vnic_intr *intr) +{ + return ioread32(&intr->ctrl->int_credits); +} + +static inline void vnic_intr_return_all_credits(struct vnic_intr *intr) +{ + unsigned int credits = vnic_intr_credits(intr); + int unmask = 1; + int reset_timer = 1; + + vnic_intr_return_credits(intr, credits, unmask, reset_timer); +} + +static inline u32 vnic_intr_legacy_pba(u32 __iomem *legacy_pba) +{ + /* read PBA without clearing */ + return ioread32(legacy_pba); +} + +void vnic_intr_free(struct vnic_intr *intr); +int vnic_intr_alloc(struct vnic_dev *vdev, struct vnic_intr *intr, + unsigned int index); +void vnic_intr_init(struct vnic_intr *intr, unsigned int coalescing_timer, + unsigned int coalescing_type, unsigned int mask_on_assertion); +void vnic_intr_clean(struct vnic_intr *intr); + +#endif /* _VNIC_INTR_H_ */ diff --git a/drivers/scsi/fnic/vnic_nic.h b/drivers/scsi/fnic/vnic_nic.h new file mode 100644 index 000000000000..f15b83eeaced --- /dev/null +++ b/drivers/scsi/fnic/vnic_nic.h @@ -0,0 +1,69 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _VNIC_NIC_H_ +#define _VNIC_NIC_H_ + +/* + * These defines avoid symbol clash between fnic and enic (Cisco 10G Eth + * Driver) when both are built with CONFIG options =y + */ +#define vnic_set_nic_cfg fnic_set_nic_cfg + +#define NIC_CFG_RSS_DEFAULT_CPU_MASK_FIELD 0xffUL +#define NIC_CFG_RSS_DEFAULT_CPU_SHIFT 0 +#define NIC_CFG_RSS_HASH_TYPE (0xffUL << 8) +#define NIC_CFG_RSS_HASH_TYPE_MASK_FIELD 0xffUL +#define NIC_CFG_RSS_HASH_TYPE_SHIFT 8 +#define NIC_CFG_RSS_HASH_BITS (7UL << 16) +#define NIC_CFG_RSS_HASH_BITS_MASK_FIELD 7UL +#define NIC_CFG_RSS_HASH_BITS_SHIFT 16 +#define NIC_CFG_RSS_BASE_CPU (7UL << 19) +#define NIC_CFG_RSS_BASE_CPU_MASK_FIELD 7UL +#define NIC_CFG_RSS_BASE_CPU_SHIFT 19 +#define NIC_CFG_RSS_ENABLE (1UL << 22) +#define NIC_CFG_RSS_ENABLE_MASK_FIELD 1UL +#define NIC_CFG_RSS_ENABLE_SHIFT 22 +#define NIC_CFG_TSO_IPID_SPLIT_EN (1UL << 23) +#define NIC_CFG_TSO_IPID_SPLIT_EN_MASK_FIELD 1UL +#define NIC_CFG_TSO_IPID_SPLIT_EN_SHIFT 23 +#define NIC_CFG_IG_VLAN_STRIP_EN (1UL << 24) +#define NIC_CFG_IG_VLAN_STRIP_EN_MASK_FIELD 1UL +#define NIC_CFG_IG_VLAN_STRIP_EN_SHIFT 24 + +static inline void vnic_set_nic_cfg(u32 *nic_cfg, + u8 rss_default_cpu, u8 rss_hash_type, + u8 rss_hash_bits, u8 rss_base_cpu, + u8 rss_enable, u8 tso_ipid_split_en, + u8 ig_vlan_strip_en) +{ + *nic_cfg = (rss_default_cpu & NIC_CFG_RSS_DEFAULT_CPU_MASK_FIELD) | + ((rss_hash_type & NIC_CFG_RSS_HASH_TYPE_MASK_FIELD) + << NIC_CFG_RSS_HASH_TYPE_SHIFT) | + ((rss_hash_bits & NIC_CFG_RSS_HASH_BITS_MASK_FIELD) + << NIC_CFG_RSS_HASH_BITS_SHIFT) | + ((rss_base_cpu & NIC_CFG_RSS_BASE_CPU_MASK_FIELD) + << NIC_CFG_RSS_BASE_CPU_SHIFT) | + ((rss_enable & NIC_CFG_RSS_ENABLE_MASK_FIELD) + << NIC_CFG_RSS_ENABLE_SHIFT) | + ((tso_ipid_split_en & NIC_CFG_TSO_IPID_SPLIT_EN_MASK_FIELD) + << NIC_CFG_TSO_IPID_SPLIT_EN_SHIFT) | + ((ig_vlan_strip_en & NIC_CFG_IG_VLAN_STRIP_EN_MASK_FIELD) + << NIC_CFG_IG_VLAN_STRIP_EN_SHIFT); +} + +#endif /* _VNIC_NIC_H_ */ diff --git a/drivers/scsi/fnic/vnic_resource.h b/drivers/scsi/fnic/vnic_resource.h new file mode 100644 index 000000000000..2d842f79d41a --- /dev/null +++ b/drivers/scsi/fnic/vnic_resource.h @@ -0,0 +1,61 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _VNIC_RESOURCE_H_ +#define _VNIC_RESOURCE_H_ + +#define VNIC_RES_MAGIC 0x766E6963L /* 'vnic' */ +#define VNIC_RES_VERSION 0x00000000L + +/* vNIC resource types */ +enum vnic_res_type { + RES_TYPE_EOL, /* End-of-list */ + RES_TYPE_WQ, /* Work queues */ + RES_TYPE_RQ, /* Receive queues */ + RES_TYPE_CQ, /* Completion queues */ + RES_TYPE_RSVD1, + RES_TYPE_NIC_CFG, /* Enet NIC config registers */ + RES_TYPE_RSVD2, + RES_TYPE_RSVD3, + RES_TYPE_RSVD4, + RES_TYPE_RSVD5, + RES_TYPE_INTR_CTRL, /* Interrupt ctrl table */ + RES_TYPE_INTR_TABLE, /* MSI/MSI-X Interrupt table */ + RES_TYPE_INTR_PBA, /* MSI/MSI-X PBA table */ + RES_TYPE_INTR_PBA_LEGACY, /* Legacy intr status */ + RES_TYPE_RSVD6, + RES_TYPE_RSVD7, + RES_TYPE_DEVCMD, /* Device command region */ + RES_TYPE_PASS_THRU_PAGE, /* Pass-thru page */ + + RES_TYPE_MAX, /* Count of resource types */ +}; + +struct vnic_resource_header { + u32 magic; + u32 version; +}; + +struct vnic_resource { + u8 type; + u8 bar; + u8 pad[2]; + u32 bar_offset; + u32 count; +}; + +#endif /* _VNIC_RESOURCE_H_ */ diff --git a/drivers/scsi/fnic/vnic_rq.c b/drivers/scsi/fnic/vnic_rq.c new file mode 100644 index 000000000000..bedd0d285630 --- /dev/null +++ b/drivers/scsi/fnic/vnic_rq.c @@ -0,0 +1,196 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include +#include +#include +#include +#include "vnic_dev.h" +#include "vnic_rq.h" + +static int vnic_rq_alloc_bufs(struct vnic_rq *rq) +{ + struct vnic_rq_buf *buf; + struct vnic_dev *vdev; + unsigned int i, j, count = rq->ring.desc_count; + unsigned int blks = VNIC_RQ_BUF_BLKS_NEEDED(count); + + vdev = rq->vdev; + + for (i = 0; i < blks; i++) { + rq->bufs[i] = kzalloc(VNIC_RQ_BUF_BLK_SZ, GFP_ATOMIC); + if (!rq->bufs[i]) { + printk(KERN_ERR "Failed to alloc rq_bufs\n"); + return -ENOMEM; + } + } + + for (i = 0; i < blks; i++) { + buf = rq->bufs[i]; + for (j = 0; j < VNIC_RQ_BUF_BLK_ENTRIES; j++) { + buf->index = i * VNIC_RQ_BUF_BLK_ENTRIES + j; + buf->desc = (u8 *)rq->ring.descs + + rq->ring.desc_size * buf->index; + if (buf->index + 1 == count) { + buf->next = rq->bufs[0]; + break; + } else if (j + 1 == VNIC_RQ_BUF_BLK_ENTRIES) { + buf->next = rq->bufs[i + 1]; + } else { + buf->next = buf + 1; + buf++; + } + } + } + + rq->to_use = rq->to_clean = rq->bufs[0]; + rq->buf_index = 0; + + return 0; +} + +void vnic_rq_free(struct vnic_rq *rq) +{ + struct vnic_dev *vdev; + unsigned int i; + + vdev = rq->vdev; + + vnic_dev_free_desc_ring(vdev, &rq->ring); + + for (i = 0; i < VNIC_RQ_BUF_BLKS_MAX; i++) { + kfree(rq->bufs[i]); + rq->bufs[i] = NULL; + } + + rq->ctrl = NULL; +} + +int vnic_rq_alloc(struct vnic_dev *vdev, struct vnic_rq *rq, unsigned int index, + unsigned int desc_count, unsigned int desc_size) +{ + int err; + + rq->index = index; + rq->vdev = vdev; + + rq->ctrl = vnic_dev_get_res(vdev, RES_TYPE_RQ, index); + if (!rq->ctrl) { + printk(KERN_ERR "Failed to hook RQ[%d] resource\n", index); + return -EINVAL; + } + + vnic_rq_disable(rq); + + err = vnic_dev_alloc_desc_ring(vdev, &rq->ring, desc_count, desc_size); + if (err) + return err; + + err = vnic_rq_alloc_bufs(rq); + if (err) { + vnic_rq_free(rq); + return err; + } + + return 0; +} + +void vnic_rq_init(struct vnic_rq *rq, unsigned int cq_index, + unsigned int error_interrupt_enable, + unsigned int error_interrupt_offset) +{ + u64 paddr; + u32 fetch_index; + + paddr = (u64)rq->ring.base_addr | VNIC_PADDR_TARGET; + writeq(paddr, &rq->ctrl->ring_base); + iowrite32(rq->ring.desc_count, &rq->ctrl->ring_size); + iowrite32(cq_index, &rq->ctrl->cq_index); + iowrite32(error_interrupt_enable, &rq->ctrl->error_interrupt_enable); + iowrite32(error_interrupt_offset, &rq->ctrl->error_interrupt_offset); + iowrite32(0, &rq->ctrl->dropped_packet_count); + iowrite32(0, &rq->ctrl->error_status); + + /* Use current fetch_index as the ring starting point */ + fetch_index = ioread32(&rq->ctrl->fetch_index); + rq->to_use = rq->to_clean = + &rq->bufs[fetch_index / VNIC_RQ_BUF_BLK_ENTRIES] + [fetch_index % VNIC_RQ_BUF_BLK_ENTRIES]; + iowrite32(fetch_index, &rq->ctrl->posted_index); + + rq->buf_index = 0; +} + +unsigned int vnic_rq_error_status(struct vnic_rq *rq) +{ + return ioread32(&rq->ctrl->error_status); +} + +void vnic_rq_enable(struct vnic_rq *rq) +{ + iowrite32(1, &rq->ctrl->enable); +} + +int vnic_rq_disable(struct vnic_rq *rq) +{ + unsigned int wait; + + iowrite32(0, &rq->ctrl->enable); + + /* Wait for HW to ACK disable request */ + for (wait = 0; wait < 100; wait++) { + if (!(ioread32(&rq->ctrl->running))) + return 0; + udelay(1); + } + + printk(KERN_ERR "Failed to disable RQ[%d]\n", rq->index); + + return -ETIMEDOUT; +} + +void vnic_rq_clean(struct vnic_rq *rq, + void (*buf_clean)(struct vnic_rq *rq, struct vnic_rq_buf *buf)) +{ + struct vnic_rq_buf *buf; + u32 fetch_index; + + BUG_ON(ioread32(&rq->ctrl->enable)); + + buf = rq->to_clean; + + while (vnic_rq_desc_used(rq) > 0) { + + (*buf_clean)(rq, buf); + + buf = rq->to_clean = buf->next; + rq->ring.desc_avail++; + } + + /* Use current fetch_index as the ring starting point */ + fetch_index = ioread32(&rq->ctrl->fetch_index); + rq->to_use = rq->to_clean = + &rq->bufs[fetch_index / VNIC_RQ_BUF_BLK_ENTRIES] + [fetch_index % VNIC_RQ_BUF_BLK_ENTRIES]; + iowrite32(fetch_index, &rq->ctrl->posted_index); + + rq->buf_index = 0; + + vnic_dev_clear_desc_ring(&rq->ring); +} + diff --git a/drivers/scsi/fnic/vnic_rq.h b/drivers/scsi/fnic/vnic_rq.h new file mode 100644 index 000000000000..aebdfbd6ad3c --- /dev/null +++ b/drivers/scsi/fnic/vnic_rq.h @@ -0,0 +1,235 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _VNIC_RQ_H_ +#define _VNIC_RQ_H_ + +#include +#include "vnic_dev.h" +#include "vnic_cq.h" + +/* + * These defines avoid symbol clash between fnic and enic (Cisco 10G Eth + * Driver) when both are built with CONFIG options =y + */ +#define vnic_rq_desc_avail fnic_rq_desc_avail +#define vnic_rq_desc_used fnic_rq_desc_used +#define vnic_rq_next_desc fnic_rq_next_desc +#define vnic_rq_next_index fnic_rq_next_index +#define vnic_rq_next_buf_index fnic_rq_next_buf_index +#define vnic_rq_post fnic_rq_post +#define vnic_rq_posting_soon fnic_rq_posting_soon +#define vnic_rq_return_descs fnic_rq_return_descs +#define vnic_rq_service fnic_rq_service +#define vnic_rq_fill fnic_rq_fill +#define vnic_rq_free fnic_rq_free +#define vnic_rq_alloc fnic_rq_alloc +#define vnic_rq_init fnic_rq_init +#define vnic_rq_error_status fnic_rq_error_status +#define vnic_rq_enable fnic_rq_enable +#define vnic_rq_disable fnic_rq_disable +#define vnic_rq_clean fnic_rq_clean + +/* Receive queue control */ +struct vnic_rq_ctrl { + u64 ring_base; /* 0x00 */ + u32 ring_size; /* 0x08 */ + u32 pad0; + u32 posted_index; /* 0x10 */ + u32 pad1; + u32 cq_index; /* 0x18 */ + u32 pad2; + u32 enable; /* 0x20 */ + u32 pad3; + u32 running; /* 0x28 */ + u32 pad4; + u32 fetch_index; /* 0x30 */ + u32 pad5; + u32 error_interrupt_enable; /* 0x38 */ + u32 pad6; + u32 error_interrupt_offset; /* 0x40 */ + u32 pad7; + u32 error_status; /* 0x48 */ + u32 pad8; + u32 dropped_packet_count; /* 0x50 */ + u32 pad9; + u32 dropped_packet_count_rc; /* 0x58 */ + u32 pad10; +}; + +/* Break the vnic_rq_buf allocations into blocks of 64 entries */ +#define VNIC_RQ_BUF_BLK_ENTRIES 64 +#define VNIC_RQ_BUF_BLK_SZ \ + (VNIC_RQ_BUF_BLK_ENTRIES * sizeof(struct vnic_rq_buf)) +#define VNIC_RQ_BUF_BLKS_NEEDED(entries) \ + DIV_ROUND_UP(entries, VNIC_RQ_BUF_BLK_ENTRIES) +#define VNIC_RQ_BUF_BLKS_MAX VNIC_RQ_BUF_BLKS_NEEDED(4096) + +struct vnic_rq_buf { + struct vnic_rq_buf *next; + dma_addr_t dma_addr; + void *os_buf; + unsigned int os_buf_index; + unsigned int len; + unsigned int index; + void *desc; +}; + +struct vnic_rq { + unsigned int index; + struct vnic_dev *vdev; + struct vnic_rq_ctrl __iomem *ctrl; /* memory-mapped */ + struct vnic_dev_ring ring; + struct vnic_rq_buf *bufs[VNIC_RQ_BUF_BLKS_MAX]; + struct vnic_rq_buf *to_use; + struct vnic_rq_buf *to_clean; + void *os_buf_head; + unsigned int buf_index; + unsigned int pkts_outstanding; +}; + +static inline unsigned int vnic_rq_desc_avail(struct vnic_rq *rq) +{ + /* how many does SW own? */ + return rq->ring.desc_avail; +} + +static inline unsigned int vnic_rq_desc_used(struct vnic_rq *rq) +{ + /* how many does HW own? */ + return rq->ring.desc_count - rq->ring.desc_avail - 1; +} + +static inline void *vnic_rq_next_desc(struct vnic_rq *rq) +{ + return rq->to_use->desc; +} + +static inline unsigned int vnic_rq_next_index(struct vnic_rq *rq) +{ + return rq->to_use->index; +} + +static inline unsigned int vnic_rq_next_buf_index(struct vnic_rq *rq) +{ + return rq->buf_index++; +} + +static inline void vnic_rq_post(struct vnic_rq *rq, + void *os_buf, unsigned int os_buf_index, + dma_addr_t dma_addr, unsigned int len) +{ + struct vnic_rq_buf *buf = rq->to_use; + + buf->os_buf = os_buf; + buf->os_buf_index = os_buf_index; + buf->dma_addr = dma_addr; + buf->len = len; + + buf = buf->next; + rq->to_use = buf; + rq->ring.desc_avail--; + + /* Move the posted_index every nth descriptor + */ + +#ifndef VNIC_RQ_RETURN_RATE +#define VNIC_RQ_RETURN_RATE 0xf /* keep 2^n - 1 */ +#endif + + if ((buf->index & VNIC_RQ_RETURN_RATE) == 0) { + /* Adding write memory barrier prevents compiler and/or CPU + * reordering, thus avoiding descriptor posting before + * descriptor is initialized. Otherwise, hardware can read + * stale descriptor fields. + */ + wmb(); + iowrite32(buf->index, &rq->ctrl->posted_index); + } +} + +static inline int vnic_rq_posting_soon(struct vnic_rq *rq) +{ + return (rq->to_use->index & VNIC_RQ_RETURN_RATE) == 0; +} + +static inline void vnic_rq_return_descs(struct vnic_rq *rq, unsigned int count) +{ + rq->ring.desc_avail += count; +} + +enum desc_return_options { + VNIC_RQ_RETURN_DESC, + VNIC_RQ_DEFER_RETURN_DESC, +}; + +static inline void vnic_rq_service(struct vnic_rq *rq, + struct cq_desc *cq_desc, u16 completed_index, + int desc_return, void (*buf_service)(struct vnic_rq *rq, + struct cq_desc *cq_desc, struct vnic_rq_buf *buf, + int skipped, void *opaque), void *opaque) +{ + struct vnic_rq_buf *buf; + int skipped; + + buf = rq->to_clean; + while (1) { + + skipped = (buf->index != completed_index); + + (*buf_service)(rq, cq_desc, buf, skipped, opaque); + + if (desc_return == VNIC_RQ_RETURN_DESC) + rq->ring.desc_avail++; + + rq->to_clean = buf->next; + + if (!skipped) + break; + + buf = rq->to_clean; + } +} + +static inline int vnic_rq_fill(struct vnic_rq *rq, + int (*buf_fill)(struct vnic_rq *rq)) +{ + int err; + + while (vnic_rq_desc_avail(rq) > 1) { + + err = (*buf_fill)(rq); + if (err) + return err; + } + + return 0; +} + +void vnic_rq_free(struct vnic_rq *rq); +int vnic_rq_alloc(struct vnic_dev *vdev, struct vnic_rq *rq, unsigned int index, + unsigned int desc_count, unsigned int desc_size); +void vnic_rq_init(struct vnic_rq *rq, unsigned int cq_index, + unsigned int error_interrupt_enable, + unsigned int error_interrupt_offset); +unsigned int vnic_rq_error_status(struct vnic_rq *rq); +void vnic_rq_enable(struct vnic_rq *rq); +int vnic_rq_disable(struct vnic_rq *rq); +void vnic_rq_clean(struct vnic_rq *rq, + void (*buf_clean)(struct vnic_rq *rq, struct vnic_rq_buf *buf)); + +#endif /* _VNIC_RQ_H_ */ diff --git a/drivers/scsi/fnic/vnic_scsi.h b/drivers/scsi/fnic/vnic_scsi.h new file mode 100644 index 000000000000..46baa5254001 --- /dev/null +++ b/drivers/scsi/fnic/vnic_scsi.h @@ -0,0 +1,99 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _VNIC_SCSI_H_ +#define _VNIC_SCSI_H_ + +#define VNIC_FNIC_WQ_COPY_COUNT_MIN 1 +#define VNIC_FNIC_WQ_COPY_COUNT_MAX 1 + +#define VNIC_FNIC_WQ_DESCS_MIN 64 +#define VNIC_FNIC_WQ_DESCS_MAX 128 + +#define VNIC_FNIC_WQ_COPY_DESCS_MIN 64 +#define VNIC_FNIC_WQ_COPY_DESCS_MAX 512 + +#define VNIC_FNIC_RQ_DESCS_MIN 64 +#define VNIC_FNIC_RQ_DESCS_MAX 128 + +#define VNIC_FNIC_EDTOV_MIN 1000 +#define VNIC_FNIC_EDTOV_MAX 255000 +#define VNIC_FNIC_EDTOV_DEF 2000 + +#define VNIC_FNIC_RATOV_MIN 1000 +#define VNIC_FNIC_RATOV_MAX 255000 + +#define VNIC_FNIC_MAXDATAFIELDSIZE_MIN 256 +#define VNIC_FNIC_MAXDATAFIELDSIZE_MAX 2112 + +#define VNIC_FNIC_FLOGI_RETRIES_MIN 0 +#define VNIC_FNIC_FLOGI_RETRIES_MAX 0xffffffff +#define VNIC_FNIC_FLOGI_RETRIES_DEF 0xffffffff + +#define VNIC_FNIC_FLOGI_TIMEOUT_MIN 1000 +#define VNIC_FNIC_FLOGI_TIMEOUT_MAX 255000 + +#define VNIC_FNIC_PLOGI_RETRIES_MIN 0 +#define VNIC_FNIC_PLOGI_RETRIES_MAX 255 +#define VNIC_FNIC_PLOGI_RETRIES_DEF 8 + +#define VNIC_FNIC_PLOGI_TIMEOUT_MIN 1000 +#define VNIC_FNIC_PLOGI_TIMEOUT_MAX 255000 + +#define VNIC_FNIC_IO_THROTTLE_COUNT_MIN 256 +#define VNIC_FNIC_IO_THROTTLE_COUNT_MAX 4096 + +#define VNIC_FNIC_LINK_DOWN_TIMEOUT_MIN 0 +#define VNIC_FNIC_LINK_DOWN_TIMEOUT_MAX 240000 + +#define VNIC_FNIC_PORT_DOWN_TIMEOUT_MIN 0 +#define VNIC_FNIC_PORT_DOWN_TIMEOUT_MAX 240000 + +#define VNIC_FNIC_PORT_DOWN_IO_RETRIES_MIN 0 +#define VNIC_FNIC_PORT_DOWN_IO_RETRIES_MAX 255 + +#define VNIC_FNIC_LUNS_PER_TARGET_MIN 1 +#define VNIC_FNIC_LUNS_PER_TARGET_MAX 1024 + +/* Device-specific region: scsi configuration */ +struct vnic_fc_config { + u64 node_wwn; + u64 port_wwn; + u32 flags; + u32 wq_enet_desc_count; + u32 wq_copy_desc_count; + u32 rq_desc_count; + u32 flogi_retries; + u32 flogi_timeout; + u32 plogi_retries; + u32 plogi_timeout; + u32 io_throttle_count; + u32 link_down_timeout; + u32 port_down_timeout; + u32 port_down_io_retries; + u32 luns_per_tgt; + u16 maxdatafieldsize; + u16 ed_tov; + u16 ra_tov; + u16 intr_timer; + u8 intr_timer_type; +}; + +#define VFCF_FCP_SEQ_LVL_ERR 0x1 /* Enable FCP-2 Error Recovery */ +#define VFCF_PERBI 0x2 /* persistent binding info available */ + +#endif /* _VNIC_SCSI_H_ */ diff --git a/drivers/scsi/fnic/vnic_stats.h b/drivers/scsi/fnic/vnic_stats.h new file mode 100644 index 000000000000..5372e23c1cb3 --- /dev/null +++ b/drivers/scsi/fnic/vnic_stats.h @@ -0,0 +1,68 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _VNIC_STATS_H_ +#define _VNIC_STATS_H_ + +/* Tx statistics */ +struct vnic_tx_stats { + u64 tx_frames_ok; + u64 tx_unicast_frames_ok; + u64 tx_multicast_frames_ok; + u64 tx_broadcast_frames_ok; + u64 tx_bytes_ok; + u64 tx_unicast_bytes_ok; + u64 tx_multicast_bytes_ok; + u64 tx_broadcast_bytes_ok; + u64 tx_drops; + u64 tx_errors; + u64 tx_tso; + u64 rsvd[16]; +}; + +/* Rx statistics */ +struct vnic_rx_stats { + u64 rx_frames_ok; + u64 rx_frames_total; + u64 rx_unicast_frames_ok; + u64 rx_multicast_frames_ok; + u64 rx_broadcast_frames_ok; + u64 rx_bytes_ok; + u64 rx_unicast_bytes_ok; + u64 rx_multicast_bytes_ok; + u64 rx_broadcast_bytes_ok; + u64 rx_drop; + u64 rx_no_bufs; + u64 rx_errors; + u64 rx_rss; + u64 rx_crc_errors; + u64 rx_frames_64; + u64 rx_frames_127; + u64 rx_frames_255; + u64 rx_frames_511; + u64 rx_frames_1023; + u64 rx_frames_1518; + u64 rx_frames_to_max; + u64 rsvd[16]; +}; + +struct vnic_stats { + struct vnic_tx_stats tx; + struct vnic_rx_stats rx; +}; + +#endif /* _VNIC_STATS_H_ */ diff --git a/drivers/scsi/fnic/vnic_wq.c b/drivers/scsi/fnic/vnic_wq.c new file mode 100644 index 000000000000..1f9ea790d130 --- /dev/null +++ b/drivers/scsi/fnic/vnic_wq.c @@ -0,0 +1,182 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include +#include +#include +#include +#include "vnic_dev.h" +#include "vnic_wq.h" + +static int vnic_wq_alloc_bufs(struct vnic_wq *wq) +{ + struct vnic_wq_buf *buf; + struct vnic_dev *vdev; + unsigned int i, j, count = wq->ring.desc_count; + unsigned int blks = VNIC_WQ_BUF_BLKS_NEEDED(count); + + vdev = wq->vdev; + + for (i = 0; i < blks; i++) { + wq->bufs[i] = kzalloc(VNIC_WQ_BUF_BLK_SZ, GFP_ATOMIC); + if (!wq->bufs[i]) { + printk(KERN_ERR "Failed to alloc wq_bufs\n"); + return -ENOMEM; + } + } + + for (i = 0; i < blks; i++) { + buf = wq->bufs[i]; + for (j = 0; j < VNIC_WQ_BUF_BLK_ENTRIES; j++) { + buf->index = i * VNIC_WQ_BUF_BLK_ENTRIES + j; + buf->desc = (u8 *)wq->ring.descs + + wq->ring.desc_size * buf->index; + if (buf->index + 1 == count) { + buf->next = wq->bufs[0]; + break; + } else if (j + 1 == VNIC_WQ_BUF_BLK_ENTRIES) { + buf->next = wq->bufs[i + 1]; + } else { + buf->next = buf + 1; + buf++; + } + } + } + + wq->to_use = wq->to_clean = wq->bufs[0]; + + return 0; +} + +void vnic_wq_free(struct vnic_wq *wq) +{ + struct vnic_dev *vdev; + unsigned int i; + + vdev = wq->vdev; + + vnic_dev_free_desc_ring(vdev, &wq->ring); + + for (i = 0; i < VNIC_WQ_BUF_BLKS_MAX; i++) { + kfree(wq->bufs[i]); + wq->bufs[i] = NULL; + } + + wq->ctrl = NULL; + +} + +int vnic_wq_alloc(struct vnic_dev *vdev, struct vnic_wq *wq, unsigned int index, + unsigned int desc_count, unsigned int desc_size) +{ + int err; + + wq->index = index; + wq->vdev = vdev; + + wq->ctrl = vnic_dev_get_res(vdev, RES_TYPE_WQ, index); + if (!wq->ctrl) { + printk(KERN_ERR "Failed to hook WQ[%d] resource\n", index); + return -EINVAL; + } + + vnic_wq_disable(wq); + + err = vnic_dev_alloc_desc_ring(vdev, &wq->ring, desc_count, desc_size); + if (err) + return err; + + err = vnic_wq_alloc_bufs(wq); + if (err) { + vnic_wq_free(wq); + return err; + } + + return 0; +} + +void vnic_wq_init(struct vnic_wq *wq, unsigned int cq_index, + unsigned int error_interrupt_enable, + unsigned int error_interrupt_offset) +{ + u64 paddr; + + paddr = (u64)wq->ring.base_addr | VNIC_PADDR_TARGET; + writeq(paddr, &wq->ctrl->ring_base); + iowrite32(wq->ring.desc_count, &wq->ctrl->ring_size); + iowrite32(0, &wq->ctrl->fetch_index); + iowrite32(0, &wq->ctrl->posted_index); + iowrite32(cq_index, &wq->ctrl->cq_index); + iowrite32(error_interrupt_enable, &wq->ctrl->error_interrupt_enable); + iowrite32(error_interrupt_offset, &wq->ctrl->error_interrupt_offset); + iowrite32(0, &wq->ctrl->error_status); +} + +unsigned int vnic_wq_error_status(struct vnic_wq *wq) +{ + return ioread32(&wq->ctrl->error_status); +} + +void vnic_wq_enable(struct vnic_wq *wq) +{ + iowrite32(1, &wq->ctrl->enable); +} + +int vnic_wq_disable(struct vnic_wq *wq) +{ + unsigned int wait; + + iowrite32(0, &wq->ctrl->enable); + + /* Wait for HW to ACK disable request */ + for (wait = 0; wait < 100; wait++) { + if (!(ioread32(&wq->ctrl->running))) + return 0; + udelay(1); + } + + printk(KERN_ERR "Failed to disable WQ[%d]\n", wq->index); + + return -ETIMEDOUT; +} + +void vnic_wq_clean(struct vnic_wq *wq, + void (*buf_clean)(struct vnic_wq *wq, struct vnic_wq_buf *buf)) +{ + struct vnic_wq_buf *buf; + + BUG_ON(ioread32(&wq->ctrl->enable)); + + buf = wq->to_clean; + + while (vnic_wq_desc_used(wq) > 0) { + + (*buf_clean)(wq, buf); + + buf = wq->to_clean = buf->next; + wq->ring.desc_avail++; + } + + wq->to_use = wq->to_clean = wq->bufs[0]; + + iowrite32(0, &wq->ctrl->fetch_index); + iowrite32(0, &wq->ctrl->posted_index); + iowrite32(0, &wq->ctrl->error_status); + + vnic_dev_clear_desc_ring(&wq->ring); +} diff --git a/drivers/scsi/fnic/vnic_wq.h b/drivers/scsi/fnic/vnic_wq.h new file mode 100644 index 000000000000..5cd094f79281 --- /dev/null +++ b/drivers/scsi/fnic/vnic_wq.h @@ -0,0 +1,175 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _VNIC_WQ_H_ +#define _VNIC_WQ_H_ + +#include +#include "vnic_dev.h" +#include "vnic_cq.h" + +/* + * These defines avoid symbol clash between fnic and enic (Cisco 10G Eth + * Driver) when both are built with CONFIG options =y + */ +#define vnic_wq_desc_avail fnic_wq_desc_avail +#define vnic_wq_desc_used fnic_wq_desc_used +#define vnic_wq_next_desc fni_cwq_next_desc +#define vnic_wq_post fnic_wq_post +#define vnic_wq_service fnic_wq_service +#define vnic_wq_free fnic_wq_free +#define vnic_wq_alloc fnic_wq_alloc +#define vnic_wq_init fnic_wq_init +#define vnic_wq_error_status fnic_wq_error_status +#define vnic_wq_enable fnic_wq_enable +#define vnic_wq_disable fnic_wq_disable +#define vnic_wq_clean fnic_wq_clean + +/* Work queue control */ +struct vnic_wq_ctrl { + u64 ring_base; /* 0x00 */ + u32 ring_size; /* 0x08 */ + u32 pad0; + u32 posted_index; /* 0x10 */ + u32 pad1; + u32 cq_index; /* 0x18 */ + u32 pad2; + u32 enable; /* 0x20 */ + u32 pad3; + u32 running; /* 0x28 */ + u32 pad4; + u32 fetch_index; /* 0x30 */ + u32 pad5; + u32 dca_value; /* 0x38 */ + u32 pad6; + u32 error_interrupt_enable; /* 0x40 */ + u32 pad7; + u32 error_interrupt_offset; /* 0x48 */ + u32 pad8; + u32 error_status; /* 0x50 */ + u32 pad9; +}; + +struct vnic_wq_buf { + struct vnic_wq_buf *next; + dma_addr_t dma_addr; + void *os_buf; + unsigned int len; + unsigned int index; + int sop; + void *desc; +}; + +/* Break the vnic_wq_buf allocations into blocks of 64 entries */ +#define VNIC_WQ_BUF_BLK_ENTRIES 64 +#define VNIC_WQ_BUF_BLK_SZ \ + (VNIC_WQ_BUF_BLK_ENTRIES * sizeof(struct vnic_wq_buf)) +#define VNIC_WQ_BUF_BLKS_NEEDED(entries) \ + DIV_ROUND_UP(entries, VNIC_WQ_BUF_BLK_ENTRIES) +#define VNIC_WQ_BUF_BLKS_MAX VNIC_WQ_BUF_BLKS_NEEDED(4096) + +struct vnic_wq { + unsigned int index; + struct vnic_dev *vdev; + struct vnic_wq_ctrl __iomem *ctrl; /* memory-mapped */ + struct vnic_dev_ring ring; + struct vnic_wq_buf *bufs[VNIC_WQ_BUF_BLKS_MAX]; + struct vnic_wq_buf *to_use; + struct vnic_wq_buf *to_clean; + unsigned int pkts_outstanding; +}; + +static inline unsigned int vnic_wq_desc_avail(struct vnic_wq *wq) +{ + /* how many does SW own? */ + return wq->ring.desc_avail; +} + +static inline unsigned int vnic_wq_desc_used(struct vnic_wq *wq) +{ + /* how many does HW own? */ + return wq->ring.desc_count - wq->ring.desc_avail - 1; +} + +static inline void *vnic_wq_next_desc(struct vnic_wq *wq) +{ + return wq->to_use->desc; +} + +static inline void vnic_wq_post(struct vnic_wq *wq, + void *os_buf, dma_addr_t dma_addr, + unsigned int len, int sop, int eop) +{ + struct vnic_wq_buf *buf = wq->to_use; + + buf->sop = sop; + buf->os_buf = eop ? os_buf : NULL; + buf->dma_addr = dma_addr; + buf->len = len; + + buf = buf->next; + if (eop) { + /* Adding write memory barrier prevents compiler and/or CPU + * reordering, thus avoiding descriptor posting before + * descriptor is initialized. Otherwise, hardware can read + * stale descriptor fields. + */ + wmb(); + iowrite32(buf->index, &wq->ctrl->posted_index); + } + wq->to_use = buf; + + wq->ring.desc_avail--; +} + +static inline void vnic_wq_service(struct vnic_wq *wq, + struct cq_desc *cq_desc, u16 completed_index, + void (*buf_service)(struct vnic_wq *wq, + struct cq_desc *cq_desc, struct vnic_wq_buf *buf, void *opaque), + void *opaque) +{ + struct vnic_wq_buf *buf; + + buf = wq->to_clean; + while (1) { + + (*buf_service)(wq, cq_desc, buf, opaque); + + wq->ring.desc_avail++; + + wq->to_clean = buf->next; + + if (buf->index == completed_index) + break; + + buf = wq->to_clean; + } +} + +void vnic_wq_free(struct vnic_wq *wq); +int vnic_wq_alloc(struct vnic_dev *vdev, struct vnic_wq *wq, unsigned int index, + unsigned int desc_count, unsigned int desc_size); +void vnic_wq_init(struct vnic_wq *wq, unsigned int cq_index, + unsigned int error_interrupt_enable, + unsigned int error_interrupt_offset); +unsigned int vnic_wq_error_status(struct vnic_wq *wq); +void vnic_wq_enable(struct vnic_wq *wq); +int vnic_wq_disable(struct vnic_wq *wq); +void vnic_wq_clean(struct vnic_wq *wq, + void (*buf_clean)(struct vnic_wq *wq, struct vnic_wq_buf *buf)); + +#endif /* _VNIC_WQ_H_ */ diff --git a/drivers/scsi/fnic/vnic_wq_copy.c b/drivers/scsi/fnic/vnic_wq_copy.c new file mode 100644 index 000000000000..9eab7e7caf38 --- /dev/null +++ b/drivers/scsi/fnic/vnic_wq_copy.c @@ -0,0 +1,117 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include +#include +#include +#include +#include "vnic_wq_copy.h" + +void vnic_wq_copy_enable(struct vnic_wq_copy *wq) +{ + iowrite32(1, &wq->ctrl->enable); +} + +int vnic_wq_copy_disable(struct vnic_wq_copy *wq) +{ + unsigned int wait; + + iowrite32(0, &wq->ctrl->enable); + + /* Wait for HW to ACK disable request */ + for (wait = 0; wait < 100; wait++) { + if (!(ioread32(&wq->ctrl->running))) + return 0; + udelay(1); + } + + printk(KERN_ERR "Failed to disable Copy WQ[%d]," + " fetch index=%d, posted_index=%d\n", + wq->index, ioread32(&wq->ctrl->fetch_index), + ioread32(&wq->ctrl->posted_index)); + + return -ENODEV; +} + +void vnic_wq_copy_clean(struct vnic_wq_copy *wq, + void (*q_clean)(struct vnic_wq_copy *wq, + struct fcpio_host_req *wq_desc)) +{ + BUG_ON(ioread32(&wq->ctrl->enable)); + + if (vnic_wq_copy_desc_in_use(wq)) + vnic_wq_copy_service(wq, -1, q_clean); + + wq->to_use_index = wq->to_clean_index = 0; + + iowrite32(0, &wq->ctrl->fetch_index); + iowrite32(0, &wq->ctrl->posted_index); + iowrite32(0, &wq->ctrl->error_status); + + vnic_dev_clear_desc_ring(&wq->ring); +} + +void vnic_wq_copy_free(struct vnic_wq_copy *wq) +{ + struct vnic_dev *vdev; + + vdev = wq->vdev; + vnic_dev_free_desc_ring(vdev, &wq->ring); + wq->ctrl = NULL; +} + +int vnic_wq_copy_alloc(struct vnic_dev *vdev, struct vnic_wq_copy *wq, + unsigned int index, unsigned int desc_count, + unsigned int desc_size) +{ + int err; + + wq->index = index; + wq->vdev = vdev; + wq->to_use_index = wq->to_clean_index = 0; + wq->ctrl = vnic_dev_get_res(vdev, RES_TYPE_WQ, index); + if (!wq->ctrl) { + printk(KERN_ERR "Failed to hook COPY WQ[%d] resource\n", index); + return -EINVAL; + } + + vnic_wq_copy_disable(wq); + + err = vnic_dev_alloc_desc_ring(vdev, &wq->ring, desc_count, desc_size); + if (err) + return err; + + return 0; +} + +void vnic_wq_copy_init(struct vnic_wq_copy *wq, unsigned int cq_index, + unsigned int error_interrupt_enable, + unsigned int error_interrupt_offset) +{ + u64 paddr; + + paddr = (u64)wq->ring.base_addr | VNIC_PADDR_TARGET; + writeq(paddr, &wq->ctrl->ring_base); + iowrite32(wq->ring.desc_count, &wq->ctrl->ring_size); + iowrite32(0, &wq->ctrl->fetch_index); + iowrite32(0, &wq->ctrl->posted_index); + iowrite32(cq_index, &wq->ctrl->cq_index); + iowrite32(error_interrupt_enable, &wq->ctrl->error_interrupt_enable); + iowrite32(error_interrupt_offset, &wq->ctrl->error_interrupt_offset); +} + diff --git a/drivers/scsi/fnic/vnic_wq_copy.h b/drivers/scsi/fnic/vnic_wq_copy.h new file mode 100644 index 000000000000..6aff9740c3df --- /dev/null +++ b/drivers/scsi/fnic/vnic_wq_copy.h @@ -0,0 +1,128 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _VNIC_WQ_COPY_H_ +#define _VNIC_WQ_COPY_H_ + +#include +#include "vnic_wq.h" +#include "fcpio.h" + +#define VNIC_WQ_COPY_MAX 1 + +struct vnic_wq_copy { + unsigned int index; + struct vnic_dev *vdev; + struct vnic_wq_ctrl __iomem *ctrl; /* memory-mapped */ + struct vnic_dev_ring ring; + unsigned to_use_index; + unsigned to_clean_index; +}; + +static inline unsigned int vnic_wq_copy_desc_avail(struct vnic_wq_copy *wq) +{ + return wq->ring.desc_avail; +} + +static inline unsigned int vnic_wq_copy_desc_in_use(struct vnic_wq_copy *wq) +{ + return wq->ring.desc_count - 1 - wq->ring.desc_avail; +} + +static inline void *vnic_wq_copy_next_desc(struct vnic_wq_copy *wq) +{ + struct fcpio_host_req *desc = wq->ring.descs; + return &desc[wq->to_use_index]; +} + +static inline void vnic_wq_copy_post(struct vnic_wq_copy *wq) +{ + + ((wq->to_use_index + 1) == wq->ring.desc_count) ? + (wq->to_use_index = 0) : (wq->to_use_index++); + wq->ring.desc_avail--; + + /* Adding write memory barrier prevents compiler and/or CPU + * reordering, thus avoiding descriptor posting before + * descriptor is initialized. Otherwise, hardware can read + * stale descriptor fields. + */ + wmb(); + + iowrite32(wq->to_use_index, &wq->ctrl->posted_index); +} + +static inline void vnic_wq_copy_desc_process(struct vnic_wq_copy *wq, u16 index) +{ + unsigned int cnt; + + if (wq->to_clean_index <= index) + cnt = (index - wq->to_clean_index) + 1; + else + cnt = wq->ring.desc_count - wq->to_clean_index + index + 1; + + wq->to_clean_index = ((index + 1) % wq->ring.desc_count); + wq->ring.desc_avail += cnt; + +} + +static inline void vnic_wq_copy_service(struct vnic_wq_copy *wq, + u16 completed_index, + void (*q_service)(struct vnic_wq_copy *wq, + struct fcpio_host_req *wq_desc)) +{ + struct fcpio_host_req *wq_desc = wq->ring.descs; + unsigned int curr_index; + + while (1) { + + if (q_service) + (*q_service)(wq, &wq_desc[wq->to_clean_index]); + + wq->ring.desc_avail++; + + curr_index = wq->to_clean_index; + + /* increment the to-clean index so that we start + * with an unprocessed index next time we enter the loop + */ + ((wq->to_clean_index + 1) == wq->ring.desc_count) ? + (wq->to_clean_index = 0) : (wq->to_clean_index++); + + if (curr_index == completed_index) + break; + + /* we have cleaned all the entries */ + if ((completed_index == (u16)-1) && + (wq->to_clean_index == wq->to_use_index)) + break; + } +} + +void vnic_wq_copy_enable(struct vnic_wq_copy *wq); +int vnic_wq_copy_disable(struct vnic_wq_copy *wq); +void vnic_wq_copy_free(struct vnic_wq_copy *wq); +int vnic_wq_copy_alloc(struct vnic_dev *vdev, struct vnic_wq_copy *wq, + unsigned int index, unsigned int desc_count, unsigned int desc_size); +void vnic_wq_copy_init(struct vnic_wq_copy *wq, unsigned int cq_index, + unsigned int error_interrupt_enable, + unsigned int error_interrupt_offset); +void vnic_wq_copy_clean(struct vnic_wq_copy *wq, + void (*q_clean)(struct vnic_wq_copy *wq, + struct fcpio_host_req *wq_desc)); + +#endif /* _VNIC_WQ_COPY_H_ */ diff --git a/drivers/scsi/fnic/wq_enet_desc.h b/drivers/scsi/fnic/wq_enet_desc.h new file mode 100644 index 000000000000..b121cbad18b8 --- /dev/null +++ b/drivers/scsi/fnic/wq_enet_desc.h @@ -0,0 +1,96 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _WQ_ENET_DESC_H_ +#define _WQ_ENET_DESC_H_ + +/* Ethernet work queue descriptor: 16B */ +struct wq_enet_desc { + __le64 address; + __le16 length; + __le16 mss_loopback; + __le16 header_length_flags; + __le16 vlan_tag; +}; + +#define WQ_ENET_ADDR_BITS 64 +#define WQ_ENET_LEN_BITS 14 +#define WQ_ENET_LEN_MASK ((1 << WQ_ENET_LEN_BITS) - 1) +#define WQ_ENET_MSS_BITS 14 +#define WQ_ENET_MSS_MASK ((1 << WQ_ENET_MSS_BITS) - 1) +#define WQ_ENET_MSS_SHIFT 2 +#define WQ_ENET_LOOPBACK_SHIFT 1 +#define WQ_ENET_HDRLEN_BITS 10 +#define WQ_ENET_HDRLEN_MASK ((1 << WQ_ENET_HDRLEN_BITS) - 1) +#define WQ_ENET_FLAGS_OM_BITS 2 +#define WQ_ENET_FLAGS_OM_MASK ((1 << WQ_ENET_FLAGS_OM_BITS) - 1) +#define WQ_ENET_FLAGS_EOP_SHIFT 12 +#define WQ_ENET_FLAGS_CQ_ENTRY_SHIFT 13 +#define WQ_ENET_FLAGS_FCOE_ENCAP_SHIFT 14 +#define WQ_ENET_FLAGS_VLAN_TAG_INSERT_SHIFT 15 + +#define WQ_ENET_OFFLOAD_MODE_CSUM 0 +#define WQ_ENET_OFFLOAD_MODE_RESERVED 1 +#define WQ_ENET_OFFLOAD_MODE_CSUM_L4 2 +#define WQ_ENET_OFFLOAD_MODE_TSO 3 + +static inline void wq_enet_desc_enc(struct wq_enet_desc *desc, + u64 address, u16 length, u16 mss, u16 header_length, + u8 offload_mode, u8 eop, u8 cq_entry, u8 fcoe_encap, + u8 vlan_tag_insert, u16 vlan_tag, u8 loopback) +{ + desc->address = cpu_to_le64(address); + desc->length = cpu_to_le16(length & WQ_ENET_LEN_MASK); + desc->mss_loopback = cpu_to_le16((mss & WQ_ENET_MSS_MASK) << + WQ_ENET_MSS_SHIFT | (loopback & 1) << WQ_ENET_LOOPBACK_SHIFT); + desc->header_length_flags = cpu_to_le16( + (header_length & WQ_ENET_HDRLEN_MASK) | + (offload_mode & WQ_ENET_FLAGS_OM_MASK) << WQ_ENET_HDRLEN_BITS | + (eop & 1) << WQ_ENET_FLAGS_EOP_SHIFT | + (cq_entry & 1) << WQ_ENET_FLAGS_CQ_ENTRY_SHIFT | + (fcoe_encap & 1) << WQ_ENET_FLAGS_FCOE_ENCAP_SHIFT | + (vlan_tag_insert & 1) << WQ_ENET_FLAGS_VLAN_TAG_INSERT_SHIFT); + desc->vlan_tag = cpu_to_le16(vlan_tag); +} + +static inline void wq_enet_desc_dec(struct wq_enet_desc *desc, + u64 *address, u16 *length, u16 *mss, u16 *header_length, + u8 *offload_mode, u8 *eop, u8 *cq_entry, u8 *fcoe_encap, + u8 *vlan_tag_insert, u16 *vlan_tag, u8 *loopback) +{ + *address = le64_to_cpu(desc->address); + *length = le16_to_cpu(desc->length) & WQ_ENET_LEN_MASK; + *mss = (le16_to_cpu(desc->mss_loopback) >> WQ_ENET_MSS_SHIFT) & + WQ_ENET_MSS_MASK; + *loopback = (u8)((le16_to_cpu(desc->mss_loopback) >> + WQ_ENET_LOOPBACK_SHIFT) & 1); + *header_length = le16_to_cpu(desc->header_length_flags) & + WQ_ENET_HDRLEN_MASK; + *offload_mode = (u8)((le16_to_cpu(desc->header_length_flags) >> + WQ_ENET_HDRLEN_BITS) & WQ_ENET_FLAGS_OM_MASK); + *eop = (u8)((le16_to_cpu(desc->header_length_flags) >> + WQ_ENET_FLAGS_EOP_SHIFT) & 1); + *cq_entry = (u8)((le16_to_cpu(desc->header_length_flags) >> + WQ_ENET_FLAGS_CQ_ENTRY_SHIFT) & 1); + *fcoe_encap = (u8)((le16_to_cpu(desc->header_length_flags) >> + WQ_ENET_FLAGS_FCOE_ENCAP_SHIFT) & 1); + *vlan_tag_insert = (u8)((le16_to_cpu(desc->header_length_flags) >> + WQ_ENET_FLAGS_VLAN_TAG_INSERT_SHIFT) & 1); + *vlan_tag = le16_to_cpu(desc->vlan_tag); +} + +#endif /* _WQ_ENET_DESC_H_ */ -- cgit v1.2.3 From b6d57ae97af3c38d28f066b5e47b7d58e468728a Mon Sep 17 00:00:00 2001 From: Dmitri Vorobiev Date: Mon, 30 Mar 2009 22:53:26 +0300 Subject: MIPS: gbe: Make needlessly global symbols static in drivers/video/gbefb.c The following symbols are needlessly defined global: default_mode default_var gbe_mem_phys gbe_turn_off gbefb_exit gbefb_init gbefb_setup This error was noticed by namespacecheck when compiling ip32_defconfig. This patch makes the symbols static. Signed-off-by: Dmitri Vorobiev Signed-off-by: Ralf Baechle --- drivers/video/gbefb.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c index fe5b519860b1..1a83709f9611 100644 --- a/drivers/video/gbefb.c +++ b/drivers/video/gbefb.c @@ -75,7 +75,7 @@ struct gbefb_par { static unsigned int gbe_mem_size = CONFIG_FB_GBE_MEM * 1024*1024; static void *gbe_mem; static dma_addr_t gbe_dma_addr; -unsigned long gbe_mem_phys; +static unsigned long gbe_mem_phys; static struct { uint16_t *cpu; @@ -185,8 +185,8 @@ static struct fb_videomode default_mode_LCD __initdata = { .vmode = FB_VMODE_NONINTERLACED, }; -struct fb_videomode *default_mode __initdata = &default_mode_CRT; -struct fb_var_screeninfo *default_var __initdata = &default_var_CRT; +static struct fb_videomode *default_mode __initdata = &default_mode_CRT; +static struct fb_var_screeninfo *default_var __initdata = &default_var_CRT; static int flat_panel_enabled = 0; @@ -205,7 +205,7 @@ static void gbe_reset(void) * console. */ -void gbe_turn_off(void) +static void gbe_turn_off(void) { int i; unsigned int val, x, y, vpixen_off; @@ -1097,7 +1097,7 @@ static void gbefb_create_sysfs(struct device *dev) * Initialization */ -int __init gbefb_setup(char *options) +static int __init gbefb_setup(char *options) { char *this_opt; @@ -1283,7 +1283,7 @@ static struct platform_driver gbefb_driver = { static struct platform_device *gbefb_device; -int __init gbefb_init(void) +static int __init gbefb_init(void) { int ret = platform_driver_register(&gbefb_driver); if (!ret) { @@ -1301,7 +1301,7 @@ int __init gbefb_init(void) return ret; } -void __exit gbefb_exit(void) +static void __exit gbefb_exit(void) { platform_device_unregister(gbefb_device); platform_driver_unregister(&gbefb_driver); -- cgit v1.2.3 From fbc97e4c5c31ea198f912196b1379d7493362800 Mon Sep 17 00:00:00 2001 From: Alan Jenkins Date: Mon, 27 Apr 2009 09:23:37 +0200 Subject: eeepc-laptop: fix wlan rfkill state change during init When an rfkill device is registered, the rfkill core will change its state to the system default. So we need to prepare for state changes *before* we register it. That means installing the eeepc-specific ACPI callback which handles the hotplug of the wireless network adaptor. This problem doesn't occur during normal operation. You have to 1) Boot with wireless enabled. eeepc-laptop should load automatically. 2) modprobe -r eeepc-laptop 3) modprobe eeepc-laptop On boot, the default rfkill state will be set to enabled. With the current core code, step 2) will disable the wireless. Therefore in step 3), the wireless will change state during registration, from disabled to enabled. But without this fix, the PCI device for the wireless adaptor will not appear. Signed-off-by: Alan Jenkins Acked-by: Matthew Garrett Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/eeepc-laptop.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index 6f54fd1757cd..e21f7cd72e4e 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -649,6 +649,9 @@ static int eeepc_hotk_add(struct acpi_device *device) if (ACPI_FAILURE(status)) printk(EEEPC_ERR "Error installing notify handler\n"); + eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6"); + eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7"); + if (get_acpi(CM_ASL_WLAN) != -1) { ehotk->eeepc_wlan_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WLAN); @@ -704,9 +707,6 @@ static int eeepc_hotk_add(struct acpi_device *device) goto bluetooth_fail; } - eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6"); - eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7"); - return 0; bluetooth_fail: -- cgit v1.2.3 From 64b86b6583db832b28bb54575e32b9e2a1a7d84f Mon Sep 17 00:00:00 2001 From: Darren Salt Date: Mon, 27 Apr 2009 09:23:38 +0200 Subject: eeepc-laptop: report brightness control events via the input layer This maps the brightness control events to one of two keys, either KEY_BRIGHTNESSDOWN or KEY_BRIGHTNESSUP, as needed. Some mapping has to be done due to the fact that the BIOS reports them as + ; the selection is done according to the sign of the change in brightness (if this is 0, no keypress is reported). (Ref. http://lists.alioth.debian.org/pipermail/debian-eeepc-devel/2009-April/002001.html) Signed-off-by: Darren Salt Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/eeepc-laptop.c | 29 ++++++++++++++++++++++++++--- 1 file changed, 26 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index e21f7cd72e4e..f54cfeac5221 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -166,6 +166,8 @@ static struct key_entry eeepc_keymap[] = { {KE_KEY, 0x1b, KEY_ZOOM }, {KE_KEY, 0x1c, KEY_PROG2 }, {KE_KEY, 0x1d, KEY_PROG3 }, + {KE_KEY, NOTIFY_BRN_MIN, KEY_BRIGHTNESSDOWN }, + {KE_KEY, NOTIFY_BRN_MIN + 2, KEY_BRIGHTNESSUP }, {KE_KEY, 0x30, KEY_SWITCHVIDEOMODE }, {KE_KEY, 0x31, KEY_SWITCHVIDEOMODE }, {KE_KEY, 0x32, KEY_SWITCHVIDEOMODE }, @@ -512,11 +514,16 @@ static int eeepc_hotk_check(void) return 0; } -static void notify_brn(void) +static int notify_brn(void) { + /* returns the *previous* brightness, or -1 */ struct backlight_device *bd = eeepc_backlight_device; - if (bd) + if (bd) { + int old = bd->props.brightness; bd->props.brightness = read_brightness(bd); + return old; + } + return -1; } static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data) @@ -558,17 +565,33 @@ static void eeepc_hotk_notify(acpi_handle handle, u32 event, void *data) { static struct key_entry *key; u16 count; + int brn = -ENODEV; if (!ehotk) return; if (event >= NOTIFY_BRN_MIN && event <= NOTIFY_BRN_MAX) - notify_brn(); + brn = notify_brn(); count = ehotk->event_count[event % 128]++; acpi_bus_generate_proc_event(ehotk->device, event, count); acpi_bus_generate_netlink_event(ehotk->device->pnp.device_class, dev_name(&ehotk->device->dev), event, count); if (ehotk->inputdev) { + if (brn != -ENODEV) { + /* brightness-change events need special + * handling for conversion to key events + */ + if (brn < 0) + brn = event; + else + brn += NOTIFY_BRN_MIN; + if (event < brn) + event = NOTIFY_BRN_MIN; /* brightness down */ + else if (event > brn) + event = NOTIFY_BRN_MIN + 2; /* ... up */ + else + event = NOTIFY_BRN_MIN + 1; /* ... unchanged */ + } key = eepc_get_entry_by_scancode(event); if (key) { switch (key->type) { -- cgit v1.2.3 From 978605c4fd8e7470f225eec7b5aab69d8796afcc Mon Sep 17 00:00:00 2001 From: Alan Jenkins Date: Mon, 27 Apr 2009 09:23:39 +0200 Subject: eeepc-laptop: Work around rfkill firmware bug 1) Buggy firmware can change the RFKILL state by itself. This is easily detected. The RFKILL API states that in such cases, we should call rfkill_force_state() to notify the core. I have reported the bug to Asus. I believe this is the right thing to do for robustness, even if this particular firmware bug is fixed. 2) The same bug causes the wireless toggle key to be reported as 0x11 instead of 0x10. 0x11 is otherwise unused, so it should be safe to add this as a new keycode. The bug is triggered by removing the laptop battery while hibernated. On resume, the wireless toggle key causes the firmware to toggle the wireless state itself. (Also, the key is reported as 0x11 when the current wireless state is OFF). This is very poor behaviour because the OS can't predict whether the firmware is controlling the RFKILL state. Without this workaround, the bug means users have to press the wireless toggle key twice to enable, due to the OS/firmware conflict. (Assuming rfkill-input or equivalent is being used). The workaround avoids this. I believe that acpid scripts which toggle the value of the sysfs state file when the toggle key is pressed will be rendered ineffective by the bug, regardless of this workaround. If they simply toggle the state, when the firmware has already toggled it, then you will never see a state change. Tested on "EEEPC 4G" only. Signed-off-by: Alan Jenkins Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/eeepc-laptop.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index f54cfeac5221..57f21f0a5655 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -158,6 +158,7 @@ enum { KE_KEY, KE_END }; static struct key_entry eeepc_keymap[] = { /* Sleep already handled via generic ACPI code */ {KE_KEY, 0x10, KEY_WLAN }, + {KE_KEY, 0x11, KEY_WLAN }, {KE_KEY, 0x12, KEY_PROG1 }, {KE_KEY, 0x13, KEY_MUTE }, {KE_KEY, 0x14, KEY_VOLUMEDOWN }, @@ -528,6 +529,7 @@ static int notify_brn(void) static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data) { + enum rfkill_state state; struct pci_dev *dev; struct pci_bus *bus = pci_find_bus(0, 1); @@ -539,7 +541,9 @@ static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data) return; } - if (get_acpi(CM_ASL_WLAN) == 1) { + eeepc_wlan_rfkill_state(ehotk->eeepc_wlan_rfkill, &state); + + if (state == RFKILL_STATE_UNBLOCKED) { dev = pci_get_slot(bus, 0); if (dev) { /* Device already present */ @@ -559,6 +563,8 @@ static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data) pci_dev_put(dev); } } + + rfkill_force_state(ehotk->eeepc_wlan_rfkill, state); } static void eeepc_hotk_notify(acpi_handle handle, u32 event, void *data) -- cgit v1.2.3 From 158ca1d75dd0d6223f3b1dd741d30777da62ab80 Mon Sep 17 00:00:00 2001 From: Grigori Goronzy Date: Mon, 27 Apr 2009 09:23:40 +0200 Subject: eeepc-laptop: support for super hybrid engine (SHE) The older eeepc-acpi driver allowed to control the SHE performance preset through a ACPI function for just this purpose. SHE underclocks and undervolts the FSB and undervolts the CPU (at preset 2, "powersave"), or slightly overclocks the CPU (at preset 0, "performance"). Preset 1 is the default setting with default clocks and voltage. The new eeepc-laptop driver doesn't support it anymore. The attached patch adds support for it to eeepc-laptop. It's very straight-forward and almost trivial. Signed-off-by: Grigori Goronzy Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/eeepc-laptop.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index 57f21f0a5655..7aaf5879f666 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -384,11 +384,13 @@ static ssize_t show_sys_acpi(int cm, char *buf) EEEPC_CREATE_DEVICE_ATTR(camera, CM_ASL_CAMERA); EEEPC_CREATE_DEVICE_ATTR(cardr, CM_ASL_CARDREADER); EEEPC_CREATE_DEVICE_ATTR(disp, CM_ASL_DISPLAYSWITCH); +EEEPC_CREATE_DEVICE_ATTR(cpufv, CM_ASL_CPUFV); static struct attribute *platform_attributes[] = { &dev_attr_camera.attr, &dev_attr_cardr.attr, &dev_attr_disp.attr, + &dev_attr_cpufv.attr, NULL }; -- cgit v1.2.3 From 309f5fbda37d5e8f1233e8b80b8e9de77262e864 Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Mon, 27 Apr 2009 09:23:42 +0200 Subject: asus-laptop: fix input keycode KEY_STOP is now KEY_STOPCD It's the correct key to stop a media BTN_EXTRA is now KEY_SCREENLOCK: The laptop manual tells us that this key is for screenlock KEY_TV is now KEY_PROG1 So it can be reported to X server Ref: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/361505 Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/asus-laptop.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c index eeafc6c0160d..bfc1a8892a32 100644 --- a/drivers/platform/x86/asus-laptop.c +++ b/drivers/platform/x86/asus-laptop.c @@ -269,16 +269,16 @@ static struct key_entry asus_keymap[] = { {KE_KEY, 0x34, KEY_SWITCHVIDEOMODE}, {KE_KEY, 0x40, KEY_PREVIOUSSONG}, {KE_KEY, 0x41, KEY_NEXTSONG}, - {KE_KEY, 0x43, KEY_STOP}, + {KE_KEY, 0x43, KEY_STOPCD}, {KE_KEY, 0x45, KEY_PLAYPAUSE}, {KE_KEY, 0x50, KEY_EMAIL}, {KE_KEY, 0x51, KEY_WWW}, - {KE_KEY, 0x5C, BTN_EXTRA}, /* Performance */ + {KE_KEY, 0x5C, KEY_SCREENLOCK}, /* Screenlock */ {KE_KEY, 0x5D, KEY_WLAN}, {KE_KEY, 0x61, KEY_SWITCHVIDEOMODE}, {KE_KEY, 0x6B, BTN_TOUCH}, /* Lock Mouse */ {KE_KEY, 0x82, KEY_CAMERA}, - {KE_KEY, 0x8A, KEY_TV}, + {KE_KEY, 0x8A, KEY_PROG1}, {KE_KEY, 0x95, KEY_MEDIA}, {KE_KEY, 0x99, KEY_PHONE}, {KE_END, 0}, -- cgit v1.2.3 From bd32005e126a465deda5d046a62f6bb842f4d9cf Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Mon, 27 Apr 2009 09:23:43 +0200 Subject: eeepc-laptop: unregister_rfkill_notifier on failure If there is a failure during eeepc_hotk_add() we need to remove the acpi_notify_handler. Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/eeepc-laptop.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index 7aaf5879f666..353a898c3693 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -748,6 +748,8 @@ static int eeepc_hotk_add(struct acpi_device *device) wlan_fail: if (ehotk->eeepc_wlan_rfkill) rfkill_free(ehotk->eeepc_wlan_rfkill); + eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6"); + eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7"); ehotk_fail: kfree(ehotk); ehotk = NULL; -- cgit v1.2.3 From 29321357ac6db54eeb8574da1f6c3e0ce8cfbb60 Mon Sep 17 00:00:00 2001 From: Vladimir Zajac Date: Wed, 6 May 2009 19:34:21 +0200 Subject: thermal: fix off-by-1 error in trip point trigger condition This patch fixes a regression caused by commit b1569e99c795bf83b4ddf41c4f1c42761ab7f75e "ACPI: move thermal trip handling to generic thermal layer" which accidentally changed trip point trigger condition to temp > trip_temp This patch changes the trigger condition back to temp >= trip_temp Signed-off-by: Vladimir Zajac Acked-by: Zhang Rui Acked-by: Matthew Garrett Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/thermal/thermal_sys.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index d0b093b66adc..5e38ba10a3a9 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -961,7 +961,7 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) switch (trip_type) { case THERMAL_TRIP_CRITICAL: - if (temp > trip_temp) { + if (temp >= trip_temp) { if (tz->ops->notify) ret = tz->ops->notify(tz, count, trip_type); @@ -974,7 +974,7 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) } break; case THERMAL_TRIP_HOT: - if (temp > trip_temp) + if (temp >= trip_temp) if (tz->ops->notify) tz->ops->notify(tz, count, trip_type); break; @@ -986,14 +986,14 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) cdev = instance->cdev; - if (temp > trip_temp) + if (temp >= trip_temp) cdev->ops->set_cur_state(cdev, 1); else cdev->ops->set_cur_state(cdev, 0); } break; case THERMAL_TRIP_PASSIVE: - if (temp > trip_temp || tz->passive) + if (temp >= trip_temp || tz->passive) thermal_zone_device_passive(tz, temp, trip_temp, count); break; -- cgit v1.2.3 From c53a284f8be23735dc6b53929640a987055f2933 Mon Sep 17 00:00:00 2001 From: Edward Goggin Date: Thu, 9 Apr 2009 10:02:22 -0700 Subject: [SCSI] initialize max_target_blocked in scsi_alloc_target This patch initializes the max_target_blocked field of a scsi target structure so that a queuecommand return value of SCSI_MLQUEUE_TARGET_BUSY will actually result in having the scsi_queue_insert blocking the device queue before requeuing the command and running the queue. Otherwise, can and does cause livelock on single CPU configurations if/when open-iSCSI software initiator's command PDU window fills. Signed-off-by: Ed Goggin Signed-off-by: James Bottomley --- drivers/scsi/scsi_scan.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 6f51ca485f35..e2b50d8f57a8 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -425,6 +425,7 @@ static struct scsi_target *scsi_alloc_target(struct device *parent, INIT_LIST_HEAD(&starget->devices); starget->state = STARGET_CREATED; starget->scsi_level = SCSI_2; + starget->max_target_blocked = SCSI_DEFAULT_TARGET_BLOCKED; retry: spin_lock_irqsave(shost->host_lock, flags); -- cgit v1.2.3 From 13f4c435ebf2a7c150ffa714f3b23b8e4e8cb42f Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Tue, 12 May 2009 15:27:36 -0700 Subject: drm/i915: Don't allow binding objects into the last page of the aperture. This should avoid a class of bugs where the hardware prefetches past the end of the object, and walks into unallocated memory when the object is bound to the last page of the aperture. fd.o bug #21488 Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_dma.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 051134c56aef..3133f991968d 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1011,8 +1011,16 @@ static int i915_load_modeset_init(struct drm_device *dev) /* Basic memrange allocator for stolen space (aka vram) */ drm_mm_init(&dev_priv->vram, 0, prealloc_size); - /* Let GEM Manage from end of prealloc space to end of aperture */ - i915_gem_do_init(dev, prealloc_size, agp_size); + /* Let GEM Manage from end of prealloc space to end of aperture. + * + * However, leave one page at the end still bound to the scratch page. + * There are a number of places where the hardware apparently + * prefetches past the end of the object, and we've seen multiple + * hangs with the GPU head pointer stuck in a batchbuffer bound + * at the last page of the aperture. One page should be enough to + * keep any prefetching inside of the aperture. + */ + i915_gem_do_init(dev, prealloc_size, agp_size - 4096); ret = i915_gem_init_ringbuffer(dev); if (ret) -- cgit v1.2.3 From 0ba0e9e1f173a59ba402a253d356612c821b7a14 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Tue, 7 Apr 2009 11:02:28 +0800 Subject: drm/i915: workaround IGD i2c bus issue in kernel side (v2) In IGD, DPCUNIT_CLOCK_GATE_DISABLE bit should be set, otherwise i2c access will be wrong. v2: Disable CLOCK_GATE_DISABLE bit after bit bashing as suggested by Eric. Signed-off-by: Shaohua Li Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_reg.h | 1 + drivers/gpu/drm/i915/intel_drv.h | 2 +- drivers/gpu/drm/i915/intel_i2c.c | 17 +++++++++++++++++ drivers/gpu/drm/i915/intel_modes.c | 6 ++++++ 4 files changed, 25 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 521194732266..15da44cf21b1 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -526,6 +526,7 @@ #define DPLLA_INPUT_BUFFER_ENABLE (1 << 0) #define D_STATE 0x6104 #define CG_2D_DIS 0x6200 +#define DPCUNIT_CLOCK_GATE_DISABLE (1 << 24) #define CG_3D_DIS 0x6204 /* diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 957daef8edff..cf2943028936 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -109,7 +109,7 @@ struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg, void intel_i2c_destroy(struct intel_i2c_chan *chan); int intel_ddc_get_modes(struct intel_output *intel_output); extern bool intel_ddc_probe(struct intel_output *intel_output); - +void intel_i2c_quirk_set(struct drm_device *dev, bool enable); extern void intel_crt_init(struct drm_device *dev); extern void intel_hdmi_init(struct drm_device *dev, int sdvox_reg); extern bool intel_sdvo_init(struct drm_device *dev, int output_device); diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c index 5ee9d4c25753..f7061f68d050 100644 --- a/drivers/gpu/drm/i915/intel_i2c.c +++ b/drivers/gpu/drm/i915/intel_i2c.c @@ -34,6 +34,21 @@ #include "i915_drm.h" #include "i915_drv.h" +void intel_i2c_quirk_set(struct drm_device *dev, bool enable) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + /* When using bit bashing for I2C, this bit needs to be set to 1 */ + if (!IS_IGD(dev)) + return; + if (enable) + I915_WRITE(CG_2D_DIS, + I915_READ(CG_2D_DIS) | DPCUNIT_CLOCK_GATE_DISABLE); + else + I915_WRITE(CG_2D_DIS, + I915_READ(CG_2D_DIS) & (~DPCUNIT_CLOCK_GATE_DISABLE)); +} + /* * Intel GPIO access functions */ @@ -153,8 +168,10 @@ struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg, goto out_free; /* JJJ: raise SCL and SDA? */ + intel_i2c_quirk_set(dev, true); set_data(chan, 1); set_clock(chan, 1); + intel_i2c_quirk_set(dev, false); udelay(20); return chan; diff --git a/drivers/gpu/drm/i915/intel_modes.c b/drivers/gpu/drm/i915/intel_modes.c index 07d7ec976168..e0910fefce87 100644 --- a/drivers/gpu/drm/i915/intel_modes.c +++ b/drivers/gpu/drm/i915/intel_modes.c @@ -27,6 +27,7 @@ #include #include "drmP.h" #include "intel_drv.h" +#include "i915_drv.h" /** * intel_ddc_probe @@ -52,7 +53,10 @@ bool intel_ddc_probe(struct intel_output *intel_output) } }; + intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, true); ret = i2c_transfer(&intel_output->ddc_bus->adapter, msgs, 2); + intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, false); + if (ret == 2) return true; @@ -70,8 +74,10 @@ int intel_ddc_get_modes(struct intel_output *intel_output) struct edid *edid; int ret = 0; + intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, true); edid = drm_get_edid(&intel_output->base, &intel_output->ddc_bus->adapter); + intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, false); if (edid) { drm_mode_connector_update_edid_property(&intel_output->base, edid); -- cgit v1.2.3 From 802c7eb646848d769a07704c16f7a3bbec9e5829 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Tue, 5 May 2009 16:03:48 -0700 Subject: drm/i915: sanity check IER at wait_request time We might sleep here anyway so I hope an extra uncached read is ok to add. In #20896 we found that vbetool clobbers the IER. In KMS mode this is particularly bad since we don't set the interrupt regs late (in EnterVT), so we'd fail to get *any* interrupts at all after X started (since some distros have scripts that call vbetool at X startup apparently). So this patch checks IER at wait_request time, and re-enables interrupts if it's been clobbered. In a proper config this check should never be triggered. This is really a distro issue, but having a sanity check is nice, as long as it doesn't have a real performance hit. Tested-by: Mateusz Kaduk Signed-off-by: Jesse Barnes [anholt: Moved the check inside of the sleeping case to avoid perf cost] Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_gem.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index ee896d91c5bc..b189b49c7602 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1691,11 +1691,20 @@ static int i915_wait_request(struct drm_device *dev, uint32_t seqno) { drm_i915_private_t *dev_priv = dev->dev_private; + u32 ier; int ret = 0; BUG_ON(seqno == 0); if (!i915_seqno_passed(i915_get_gem_seqno(dev), seqno)) { + ier = I915_READ(IER); + if (!ier) { + DRM_ERROR("something (likely vbetool) disabled " + "interrupts, re-enabling\n"); + i915_driver_irq_preinstall(dev); + i915_driver_irq_postinstall(dev); + } + dev_priv->mm.waiting_gem_seqno = seqno; i915_user_irq_get(dev); ret = wait_event_interruptible(dev_priv->irq_queue, -- cgit v1.2.3 From 425d244c86700bdbc68d096c812336b6a5b9b4e9 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Tue, 5 May 2009 10:00:25 -0400 Subject: drm/i915: ignore LVDS on intel graphics systems that lie about having it There are a number of small form factor desktop systems with Intel mobile graphics chips that lie and say they have an LVDS. With kernel mode-setting, this becomes a problem, and makes native resolution boot go haywire -- for example, my Dell Studio Hybrid, hooked to a 1920x1080 display claims to have a 1024x768 LVDS, and the resulting graphical boot on the 1920x1080 display uses only the top left 1024x768, and auto-configured X will end up only 1024x768 as well. With this change, graphical boot and X both do 1920x1080 as expected. Note that we're simply embracing and extending the early bail-out code in place for the Mac Mini here. The xorg intel driver uses pci subsystem device and vendor id for matching, while we're using dmi lookups here. The MSI addition is courtesy of and tested by Bill Nottingham. Signed-off-by: Jarod Wilson Tested-by: Bill Nottingham Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_lvds.c | 54 +++++++++++++++++++++++++++++++++------ 1 file changed, 46 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 6619f26e46a5..439a86514993 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -384,7 +384,51 @@ static const struct drm_encoder_funcs intel_lvds_enc_funcs = { .destroy = intel_lvds_enc_destroy, }; +static int __init intel_no_lvds_dmi_callback(const struct dmi_system_id *id) +{ + DRM_DEBUG("Skipping LVDS initialization for %s\n", id->ident); + return 1; +} +/* These systems claim to have LVDS, but really don't */ +static const struct dmi_system_id __initdata intel_no_lvds[] = { + { + .callback = intel_no_lvds_dmi_callback, + .ident = "Apple Mac Mini (Core series)", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"), + }, + }, + { + .callback = intel_no_lvds_dmi_callback, + .ident = "Apple Mac Mini (Core 2 series)", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Macmini2,1"), + }, + }, + { + .callback = intel_no_lvds_dmi_callback, + .ident = "MSI IM-945GSE-A", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "MSI"), + DMI_MATCH(DMI_PRODUCT_NAME, "A9830IMS"), + }, + }, + { + .callback = intel_no_lvds_dmi_callback, + .ident = "Dell Studio Hybrid", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Studio Hybrid 140g"), + }, + }, + + /* FIXME: add a check for the Aopen Mini PC */ + + { } /* terminating entry */ +}; /** * intel_lvds_init - setup LVDS connectors on this device @@ -404,15 +448,9 @@ void intel_lvds_init(struct drm_device *dev) u32 lvds; int pipe; - /* Blacklist machines that we know falsely report LVDS. */ - /* FIXME: add a check for the Aopen Mini PC */ - - /* Apple Mac Mini Core Duo and Mac Mini Core 2 Duo */ - if(dmi_match(DMI_PRODUCT_NAME, "Macmini1,1") || - dmi_match(DMI_PRODUCT_NAME, "Macmini2,1")) { - DRM_DEBUG("Skipping LVDS initialization for Apple Mac Mini\n"); + /* Skip init on machines we know falsely report LVDS */ + if (dmi_check_system(intel_no_lvds)) return; - } intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL); if (!intel_output) { -- cgit v1.2.3 From e92597cffffabe9a9a85db462045330970c498d0 Mon Sep 17 00:00:00 2001 From: Ma Ling Date: Wed, 13 May 2009 14:46:12 +0800 Subject: drm/i915: Use the GM45 VGA hotplug workaround on G45 as well. Although spec say CRT_HOTPLUG_ACTIVATION_PERIOD_64 is only useful for mobile platform, it is also required to detect vga on G4x desktops correctly. Tested on G45/G43/Q45 platforms with no regressions. It fixed freedesktop.org bug #21120 and part of bug #21210 Signed-off-by: Ma Ling Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_crt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index 9bdd959260a5..19148c3df637 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -161,7 +161,7 @@ static bool intel_crt_detect_hotplug(struct drm_connector *connector) hotplug_en &= CRT_FORCE_HOTPLUG_MASK; hotplug_en |= CRT_HOTPLUG_FORCE_DETECT; - if (IS_GM45(dev)) + if (IS_G4X(dev)) hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64; hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50; -- cgit v1.2.3 From c9ed4486bdee3b54cb544fc181057bc6bf1ae45c Mon Sep 17 00:00:00 2001 From: Ma Ling Date: Wed, 13 May 2009 15:08:27 +0800 Subject: drm/i915: Include 965GME pci ID in IS_I965GM(dev) to match UMS. It fixed bug #21659 Signed-off-by: Ma Ling [anholt: hand-applied because git-am is too picky] Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_drv.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index b47af07f3918..9b149fe824c3 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -786,7 +786,8 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); (dev)->pci_device == 0x2E22 || \ (dev)->pci_device == 0x2E32) -#define IS_I965GM(dev) ((dev)->pci_device == 0x2A02) +#define IS_I965GM(dev) ((dev)->pci_device == 0x2A02 || \ + (dev)->pci_device == 0x2A12) #define IS_GM45(dev) ((dev)->pci_device == 0x2A42) -- cgit v1.2.3 From 9d2949a4cdb77b9b5c243c79be6489d34d770c7c Mon Sep 17 00:00:00 2001 From: Ma Ling Date: Mon, 11 May 2009 11:33:22 +0800 Subject: drm/i915: Set HDMI hot plug interrupt enable for only the output in question. We detect HDMI output connection status by writing to HOT Plug Interrupt Detect Enable bit in PORT_HOTPLUG_EN. The behavior will generate a specified interrupt, which is caught by audio driver, but during one detection driver set all Detect Enable bits of HDMIB, HDMIC HDMID, and generate wrong interrupt signals for current output, according to the signals audio driver misunderstand device status. The patch intends to handle corresponding output precisely. It fixed freedesktop.org bug #21371 Signed-off-by: Ma Ling Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_hdmi.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index 550374225388..d0983bb93a18 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -155,11 +155,18 @@ intel_hdmi_detect(struct drm_connector *connector) temp = I915_READ(PORT_HOTPLUG_EN); - I915_WRITE(PORT_HOTPLUG_EN, - temp | - HDMIB_HOTPLUG_INT_EN | - HDMIC_HOTPLUG_INT_EN | - HDMID_HOTPLUG_INT_EN); + switch (hdmi_priv->sdvox_reg) { + case SDVOB: + temp |= HDMIB_HOTPLUG_INT_EN; + break; + case SDVOC: + temp |= HDMIC_HOTPLUG_INT_EN; + break; + default: + return connector_status_unknown; + } + + I915_WRITE(PORT_HOTPLUG_EN, temp); POSTING_READ(PORT_HOTPLUG_EN); -- cgit v1.2.3 From 08d7b3d1edff84bd673d9e9ab36b5aa62e1ba903 Mon Sep 17 00:00:00 2001 From: Carl Worth Date: Wed, 29 Apr 2009 14:43:54 -0700 Subject: drm/i915: Add new GET_PIPE_FROM_CRTC_ID ioctl. This allows userlevel code to discover the pipe number corresponding to a given CRTC ID. This is necessary for doing pipe-specific operations such as waiting for vblank on a given CRTC. Failure to use the right pipe mapping can result in GPU hangs, or at least failure to actually sync to vblank. Signed-off-by: Carl Worth [anholt: Style touchups from review] Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_dma.c | 1 + drivers/gpu/drm/i915/intel_display.c | 31 +++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_drv.h | 2 ++ 3 files changed, 34 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 3133f991968d..53d544552625 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1358,6 +1358,7 @@ struct drm_ioctl_desc i915_ioctls[] = { DRM_IOCTL_DEF(DRM_I915_GEM_SET_TILING, i915_gem_set_tiling, 0), DRM_IOCTL_DEF(DRM_I915_GEM_GET_TILING, i915_gem_get_tiling, 0), DRM_IOCTL_DEF(DRM_I915_GEM_GET_APERTURE, i915_gem_get_aperture_ioctl, 0), + DRM_IOCTL_DEF(DRM_I915_GET_PIPE_FROM_CRTC_ID, intel_get_pipe_from_crtc_id, 0), }; int i915_max_ioctl = DRM_ARRAY_SIZE(i915_ioctls); diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index bdcda36953b0..3387cf32f385 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1804,6 +1804,37 @@ static void intel_crtc_init(struct drm_device *dev, int pipe) } } +int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_get_pipe_from_crtc_id *pipe_from_crtc_id = data; + struct drm_crtc *crtc = NULL; + int pipe = -1; + + if (!dev_priv) { + DRM_ERROR("called with no initialization\n"); + return -EINVAL; + } + + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + if (crtc->base.id == pipe_from_crtc_id->crtc_id) { + pipe = intel_crtc->pipe; + break; + } + } + + if (pipe == -1) { + DRM_ERROR("no such CRTC id\n"); + return -EINVAL; + } + + pipe_from_crtc_id->pipe = pipe; + + return 0; +} + struct drm_crtc *intel_get_crtc_from_pipe(struct drm_device *dev, int pipe) { struct drm_crtc *crtc = NULL; diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index cf2943028936..cd4b9c5f715e 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -125,6 +125,8 @@ extern struct drm_encoder *intel_best_encoder(struct drm_connector *connector); extern struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev, struct drm_crtc *crtc); +int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data, + struct drm_file *file_priv); extern void intel_wait_for_vblank(struct drm_device *dev); extern struct drm_crtc *intel_get_crtc_from_pipe(struct drm_device *dev, int pipe); extern struct drm_crtc *intel_get_load_detect_pipe(struct intel_output *intel_output, -- cgit v1.2.3 From 4e5b6d006b61b6b998e15da850d959520f811b4c Mon Sep 17 00:00:00 2001 From: Inaky Perez-Gonzalez Date: Fri, 8 May 2009 14:02:32 -0700 Subject: wimax/i2400m: fix device crash: fix optimization in _roq_queue_update_ws When the i2400m receives data and the device indicates there has to be reordering, we keep an sliding window implementation to sort the packets before sending them to the network stack. One of the "operations" that the device indicates is "queue a packet and update the window start". When the queue is empty, this is equivalent to "deliver the packet and update the window start". That case was optimized in i2400m_roq_queue_update_ws() so that we would not pointlessly queue and dequeue a packet. However, when the optimization was active, it wasn't updating the window start. That caused the reorder management code to get confused later on with what seemed to be wrong reorder requests from the device. Thus the fix implemented is to do the right thing and update the window start in both cases, when the queue is empty (and the optimization is done) and when not. Signed-off-by: Inaky Perez-Gonzalez --- drivers/net/wimax/i2400m/rx.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c index 02419bfd64b5..f9fc38902322 100644 --- a/drivers/net/wimax/i2400m/rx.c +++ b/drivers/net/wimax/i2400m/rx.c @@ -819,10 +819,9 @@ void i2400m_roq_queue_update_ws(struct i2400m *i2400m, struct i2400m_roq *roq, roq_data = (struct i2400m_roq_data *) &skb->cb; i2400m_net_erx(i2400m, skb, roq_data->cs); } - else { + else __i2400m_roq_queue(i2400m, roq, skb, sn, nsn); - __i2400m_roq_update_ws(i2400m, roq, sn + 1); - } + __i2400m_roq_update_ws(i2400m, roq, sn + 1); i2400m_roq_log_add(i2400m, roq, I2400M_RO_TYPE_PACKET_WS, old_ws, len, sn, nsn, roq->ws); } -- cgit v1.2.3 From 951c4df5b7703137bf4eee002d98d083fbc890cc Mon Sep 17 00:00:00 2001 From: Benjamin Krill Date: Wed, 13 May 2009 05:56:54 +0000 Subject: serial/nwpserial: Fix wrong register read address and add interrupt acknowledge. The receive interrupt routine checks the wrong register if the receive fifo is empty. Further an explicit interrupt acknowledge write is introduced. In some circumstances another interrupt was issued. Signed-off-by: Benjamin Krill Signed-off-by: Arnd Bergmann Signed-off-by: Benjamin Herrenschmidt --- drivers/serial/nwpserial.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/serial/nwpserial.c b/drivers/serial/nwpserial.c index 32f3eaf0d262..9e150b19d726 100644 --- a/drivers/serial/nwpserial.c +++ b/drivers/serial/nwpserial.c @@ -145,11 +145,13 @@ static irqreturn_t nwpserial_interrupt(int irq, void *dev_id) ch = dcr_read(up->dcr_host, UART_RX); if (up->port.ignore_status_mask != NWPSERIAL_STATUS_RXVALID) tty_insert_flip_char(tty, ch, TTY_NORMAL); - } while (dcr_read(up->dcr_host, UART_RX) & UART_LSR_DR); + } while (dcr_read(up->dcr_host, UART_LSR) & UART_LSR_DR); tty_flip_buffer_push(tty); ret = IRQ_HANDLED; + /* clear interrupt */ + dcr_write(up->dcr_host, UART_IIR, 1); out: spin_unlock(&up->port.lock); return ret; -- cgit v1.2.3 From 364b5b7b1d793a7f98be55b6b154716dcae78dfc Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Wed, 13 May 2009 21:56:59 -0500 Subject: sysrq, intel_fb: fix sysrq g collision Commit 79e539453b34e35f39299a899d263b0a1f1670bd introduced a regression where you cannot use sysrq 'g' to enter kgdb. The solution is to move the intel fb sysrq over to V for video instead of G for graphics. The SMP VOYAGER code to register for the sysrq-v is not anywhere to be found in the mainline kernel, so the comments in the code were cleaned up as well. This patch also cleans up the sysrq definitions for kgdb to make it generic for the kernel debugger, such that the sysrq 'g' can be used in the future to enter a gdbstub or another kernel debugger. Signed-off-by: Jason Wessel Acked-by: Jesse Barnes Acked-by: Randy Dunlap Signed-off-by: Andrew Morton --- drivers/char/sysrq.c | 4 ++-- drivers/gpu/drm/i915/intel_fb.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c index b0a6a3e51924..d6a807f4077d 100644 --- a/drivers/char/sysrq.c +++ b/drivers/char/sysrq.c @@ -406,7 +406,7 @@ static struct sysrq_key_op *sysrq_key_table[36] = { &sysrq_showlocks_op, /* d */ &sysrq_term_op, /* e */ &sysrq_moom_op, /* f */ - /* g: May be registered by ppc for kgdb */ + /* g: May be registered for the kernel debugger */ NULL, /* g */ NULL, /* h - reserved for help */ &sysrq_kill_op, /* i */ @@ -431,7 +431,7 @@ static struct sysrq_key_op *sysrq_key_table[36] = { &sysrq_sync_op, /* s */ &sysrq_showstate_op, /* t */ &sysrq_mountro_op, /* u */ - /* v: May be registered at init time by SMP VOYAGER */ + /* v: May be registered for frame buffer console restore */ NULL, /* v */ &sysrq_showstate_blocked_op, /* w */ /* x: May be registered on ppc/powerpc for xmon */ diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c index 3e094beecb99..e4652dcdd9bb 100644 --- a/drivers/gpu/drm/i915/intel_fb.c +++ b/drivers/gpu/drm/i915/intel_fb.c @@ -864,7 +864,7 @@ static void intelfb_sysrq(int dummy1, struct tty_struct *dummy3) static struct sysrq_key_op sysrq_intelfb_restore_op = { .handler = intelfb_sysrq, - .help_msg = "force-fb(G)", + .help_msg = "force-fb(V)", .action_msg = "Restore framebuffer console", }; @@ -898,7 +898,7 @@ int intelfb_probe(struct drm_device *dev) ret = intelfb_single_fb_probe(dev); } - register_sysrq_key('g', &sysrq_intelfb_restore_op); + register_sysrq_key('v', &sysrq_intelfb_restore_op); return ret; } -- cgit v1.2.3 From 9a1a69a1f41cbefebf3172761f197db6aba71e68 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Wed, 29 Apr 2009 13:12:39 -0500 Subject: [SCSI] fc-transport: Close state transition-window during rport deletion. Andrew Vasquez wrote: > fc-transport: Close state transition-window during rport deletion. > > After an rport's state has transitioned to FC_PORTSTATE_BLOCKED, > but, prior to making the upcall to 'block' the scsi-target > associated with an rport, queued commands can recycle and > ultimately run out of retries causing failures to propagate to > upper-level drivers. Close this transition-window by returning > the non-'retries' modifying DID_IMM_RETRY status for submitted > I/Os. The same can happen for iscsi when transitioning from logged in to failed and blocking the sdevs. This patch converts iscsi and fc's transitions back to use DID_IMM_RETRY instead of DID_TRANSPORT_DISRUPTED which has a limited number of retries that we do not want to use for handling this race. Signed-off-by: Andrew Vasquez [Addition of iscsi and fc port online devloss case conversion by Mike Christie] Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/scsi_transport_iscsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index 094795455293..0a2ce7b6325c 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -357,7 +357,7 @@ int iscsi_session_chkready(struct iscsi_cls_session *session) err = 0; break; case ISCSI_SESSION_FAILED: - err = DID_TRANSPORT_DISRUPTED << 16; + err = DID_IMM_RETRY << 16; break; case ISCSI_SESSION_FREE: err = DID_TRANSPORT_FAILFAST << 16; -- cgit v1.2.3 From 5e43754fd949193252ecb470d7fb08b547a1e310 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 30 Apr 2009 19:13:41 -0700 Subject: [SCSI] ses: fix problems caused by empty SES provided name We use the name provided by SES to name objects. An empty name is legal in SES but causes problems in our generic device hierarchy. Fix this by falling back to a number if the name is either NULL or empty. Also fix a secondary bug spotted in that dev_set_name(dev, name) uses a string format and so would go wrong if name contained a '%'. Signed-off-by: Yinghai Lu Signed-off-by: James Bottomley --- drivers/misc/enclosure.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/enclosure.c b/drivers/misc/enclosure.c index 3cf61ece71d7..348443bdb23b 100644 --- a/drivers/misc/enclosure.c +++ b/drivers/misc/enclosure.c @@ -119,7 +119,7 @@ enclosure_register(struct device *dev, const char *name, int components, edev->edev.class = &enclosure_class; edev->edev.parent = get_device(dev); edev->cb = cb; - dev_set_name(&edev->edev, name); + dev_set_name(&edev->edev, "%s", name); err = device_register(&edev->edev); if (err) goto err; @@ -255,8 +255,8 @@ enclosure_component_register(struct enclosure_device *edev, ecomp->number = number; cdev = &ecomp->cdev; cdev->parent = get_device(&edev->edev); - if (name) - dev_set_name(cdev, name); + if (name && name[0]) + dev_set_name(cdev, "%s", name); else dev_set_name(cdev, "%u", number); -- cgit v1.2.3 From 8454e9888cb0316dd296fd5d47c612248ed5e1d1 Mon Sep 17 00:00:00 2001 From: adam radford Date: Tue, 5 May 2009 11:45:37 -0700 Subject: [SCSI] 3w-9xxx: scsi_dma_unmap fix This patch fixes the following regression the occurred during the scsi_dma_map()/unmap() changes: 3w-9xxx 0001:45:00.0: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x0000000000000000] [size=36 bytes] Signed-off-by: Adam Radford Signed-off-by: James Bottomley --- drivers/scsi/3w-9xxx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c index 8b7983aba8f7..36c21b19e5d7 100644 --- a/drivers/scsi/3w-9xxx.c +++ b/drivers/scsi/3w-9xxx.c @@ -1978,7 +1978,8 @@ static void twa_unmap_scsi_data(TW_Device_Extension *tw_dev, int request_id) { struct scsi_cmnd *cmd = tw_dev->srb[request_id]; - scsi_dma_unmap(cmd); + if (cmd->SCp.phase == TW_PHASE_SGLIST) + scsi_dma_unmap(cmd); } /* End twa_unmap_scsi_data() */ /* scsi_host_template initializer */ -- cgit v1.2.3 From 7b14f58ad65f9d74e4273fb45360cfea824495aa Mon Sep 17 00:00:00 2001 From: adam radford Date: Mon, 11 May 2009 14:55:55 -0700 Subject: [SCSI] 3w-xxxx: scsi_dma_unmap fix This patch fixes the following regression that occurred during the scsi_dma_map()/unmap() changes when compiling with CONFIG_DMA_API_DEBUG=y : WARNING: at lib/dma-debug.c:496 check_unmap+0x142/0x542() Hardware name: 3w-xxxx 0000:02:02.0: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x0000000000000000] [size=36 bytes] Signed-off-by: Adam Radford Signed-off-by: James Bottomley --- drivers/scsi/3w-xxxx.c | 5 +++-- drivers/scsi/3w-xxxx.h | 2 +- 2 files changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/3w-xxxx.c b/drivers/scsi/3w-xxxx.c index c03f1d2c9e2e..faa0fcfed71e 100644 --- a/drivers/scsi/3w-xxxx.c +++ b/drivers/scsi/3w-xxxx.c @@ -6,7 +6,7 @@ Arnaldo Carvalho de Melo Brad Strand - Copyright (C) 1999-2007 3ware Inc. + Copyright (C) 1999-2009 3ware Inc. Kernel compatiblity By: Andre Hedrick Non-Copyright (C) 2000 Andre Hedrick @@ -1294,7 +1294,8 @@ static void tw_unmap_scsi_data(struct pci_dev *pdev, struct scsi_cmnd *cmd) { dprintk(KERN_WARNING "3w-xxxx: tw_unmap_scsi_data()\n"); - scsi_dma_unmap(cmd); + if (cmd->SCp.phase == TW_PHASE_SGLIST) + scsi_dma_unmap(cmd); } /* End tw_unmap_scsi_data() */ /* This function will reset a device extension */ diff --git a/drivers/scsi/3w-xxxx.h b/drivers/scsi/3w-xxxx.h index 8e71e5e122b3..a5a2ba2561d9 100644 --- a/drivers/scsi/3w-xxxx.h +++ b/drivers/scsi/3w-xxxx.h @@ -6,7 +6,7 @@ Arnaldo Carvalho de Melo Brad Strand - Copyright (C) 1999-2007 3ware Inc. + Copyright (C) 1999-2009 3ware Inc. Kernel compatiblity By: Andre Hedrick Non-Copyright (C) 2000 Andre Hedrick -- cgit v1.2.3 From 67651ee5710c45ea62fae68b768d65395ccf47c2 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 8 Apr 2009 16:02:18 -0400 Subject: [libata] sata_sx4: convert to new exception handling methods Signed-off-by: Jeff Garzik --- drivers/ata/sata_sx4.c | 166 +++++++++++++++++++++++++++++++++++-------------- 1 file changed, 121 insertions(+), 45 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c index dce3dccced3f..1ce98afa69b6 100644 --- a/drivers/ata/sata_sx4.c +++ b/drivers/ata/sata_sx4.c @@ -213,8 +213,9 @@ struct pdc_host_priv { static int pdc_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); -static void pdc_eng_timeout(struct ata_port *ap); -static void pdc_20621_phy_reset(struct ata_port *ap); +static void pdc_error_handler(struct ata_port *ap); +static void pdc_freeze(struct ata_port *ap); +static void pdc_thaw(struct ata_port *ap); static int pdc_port_start(struct ata_port *ap); static void pdc20621_qc_prep(struct ata_queued_cmd *qc); static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf); @@ -233,6 +234,10 @@ static void pdc20621_put_to_dimm(struct ata_host *host, void *psource, u32 offset, u32 size); static void pdc20621_irq_clear(struct ata_port *ap); static unsigned int pdc20621_qc_issue(struct ata_queued_cmd *qc); +static int pdc_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); +static void pdc_post_internal_cmd(struct ata_queued_cmd *qc); +static int pdc_check_atapi_dma(struct ata_queued_cmd *qc); static struct scsi_host_template pdc_sata_sht = { @@ -243,20 +248,24 @@ static struct scsi_host_template pdc_sata_sht = { /* TODO: inherit from base port_ops after converting to new EH */ static struct ata_port_operations pdc_20621_ops = { - .sff_tf_load = pdc_tf_load_mmio, - .sff_tf_read = ata_sff_tf_read, - .sff_check_status = ata_sff_check_status, - .sff_exec_command = pdc_exec_command_mmio, - .sff_dev_select = ata_sff_dev_select, - .phy_reset = pdc_20621_phy_reset, + .inherits = &ata_sff_port_ops, + + .check_atapi_dma = pdc_check_atapi_dma, .qc_prep = pdc20621_qc_prep, .qc_issue = pdc20621_qc_issue, - .qc_fill_rtf = ata_sff_qc_fill_rtf, - .sff_data_xfer = ata_sff_data_xfer, - .eng_timeout = pdc_eng_timeout, - .sff_irq_clear = pdc20621_irq_clear, - .sff_irq_on = ata_sff_irq_on, + + .freeze = pdc_freeze, + .thaw = pdc_thaw, + .softreset = pdc_softreset, + .error_handler = pdc_error_handler, + .lost_interrupt = ATA_OP_NULL, + .post_internal_cmd = pdc_post_internal_cmd, + .port_start = pdc_port_start, + + .sff_tf_load = pdc_tf_load_mmio, + .sff_exec_command = pdc_exec_command_mmio, + .sff_irq_clear = pdc20621_irq_clear, }; static const struct ata_port_info pdc_port_info[] = { @@ -310,14 +319,6 @@ static int pdc_port_start(struct ata_port *ap) return 0; } -static void pdc_20621_phy_reset(struct ata_port *ap) -{ - VPRINTK("ENTER\n"); - ap->cbl = ATA_CBL_SATA; - ata_port_probe(ap); - ata_bus_reset(ap); -} - static inline void pdc20621_ata_sg(struct ata_taskfile *tf, u8 *buf, unsigned int portno, unsigned int total_len) @@ -859,40 +860,115 @@ static irqreturn_t pdc20621_interrupt(int irq, void *dev_instance) return IRQ_RETVAL(handled); } -static void pdc_eng_timeout(struct ata_port *ap) +static void pdc_freeze(struct ata_port *ap) { - u8 drv_stat; - struct ata_host *host = ap->host; - struct ata_queued_cmd *qc; - unsigned long flags; + void __iomem *mmio = ap->ioaddr.cmd_addr; + u32 tmp; - DPRINTK("ENTER\n"); + /* FIXME: if all 4 ATA engines are stopped, also stop HDMA engine */ - spin_lock_irqsave(&host->lock, flags); + tmp = readl(mmio + PDC_CTLSTAT); + tmp |= PDC_MASK_INT; + tmp &= ~PDC_DMA_ENABLE; + writel(tmp, mmio + PDC_CTLSTAT); + readl(mmio + PDC_CTLSTAT); /* flush */ +} - qc = ata_qc_from_tag(ap, ap->link.active_tag); +static void pdc_thaw(struct ata_port *ap) +{ + void __iomem *mmio = ap->ioaddr.cmd_addr; + void __iomem *mmio_base; + u32 tmp; - switch (qc->tf.protocol) { - case ATA_PROT_DMA: - case ATA_PROT_NODATA: - ata_port_printk(ap, KERN_ERR, "command timeout\n"); - qc->err_mask |= __ac_err_mask(ata_wait_idle(ap)); - break; + /* FIXME: start HDMA engine, if zero ATA engines running */ - default: - drv_stat = ata_sff_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000); + /* reading SEQ mask register clears IRQ */ + mmio_base = ap->host->iomap[PDC_MMIO_BAR] + PDC_CHIP0_OFS; + readl(mmio_base + PDC_20621_SEQMASK); - ata_port_printk(ap, KERN_ERR, - "unknown timeout, cmd 0x%x stat 0x%x\n", - qc->tf.command, drv_stat); + /* turn IRQ back on */ + tmp = readl(mmio + PDC_CTLSTAT); + tmp &= ~PDC_MASK_INT; + writel(tmp, mmio + PDC_CTLSTAT); + readl(mmio + PDC_CTLSTAT); /* flush */ +} - qc->err_mask |= ac_err_mask(drv_stat); - break; +static void pdc_reset_port(struct ata_port *ap) +{ + void __iomem *mmio = ap->ioaddr.cmd_addr + PDC_CTLSTAT; + unsigned int i; + u32 tmp; + + /* FIXME: handle HDMA copy engine */ + + for (i = 11; i > 0; i--) { + tmp = readl(mmio); + if (tmp & PDC_RESET) + break; + + udelay(100); + + tmp |= PDC_RESET; + writel(tmp, mmio); } - spin_unlock_irqrestore(&host->lock, flags); - ata_eh_qc_complete(qc); - DPRINTK("EXIT\n"); + tmp &= ~PDC_RESET; + writel(tmp, mmio); + readl(mmio); /* flush */ +} + +static int pdc_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + pdc_reset_port(link->ap); + return ata_sff_softreset(link, class, deadline); +} + +static void pdc_error_handler(struct ata_port *ap) +{ + if (!(ap->pflags & ATA_PFLAG_FROZEN)) + pdc_reset_port(ap); + + ata_std_error_handler(ap); +} + +static void pdc_post_internal_cmd(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + /* make DMA engine forget about the failed command */ + if (qc->flags & ATA_QCFLAG_FAILED) + pdc_reset_port(ap); +} + +static int pdc_check_atapi_dma(struct ata_queued_cmd *qc) +{ + u8 *scsicmd = qc->scsicmd->cmnd; + int pio = 1; /* atapi dma off by default */ + + /* Whitelist commands that may use DMA. */ + switch (scsicmd[0]) { + case WRITE_12: + case WRITE_10: + case WRITE_6: + case READ_12: + case READ_10: + case READ_6: + case 0xad: /* READ_DVD_STRUCTURE */ + case 0xbe: /* READ_CD */ + pio = 0; + } + /* -45150 (FFFF4FA2) to -1 (FFFFFFFF) shall use PIO mode */ + if (scsicmd[0] == WRITE_10) { + unsigned int lba = + (scsicmd[2] << 24) | + (scsicmd[3] << 16) | + (scsicmd[4] << 8) | + scsicmd[5]; + if (lba >= 0xFFFF4FA2) + pio = 1; + } + return pio; } static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf) -- cgit v1.2.3 From 19799bfc5da476ad72eecc5f0f9018c5d351cbd5 Mon Sep 17 00:00:00 2001 From: David Milburn Date: Wed, 13 May 2009 18:02:21 -0500 Subject: [libata] sata_sx4: fixup interrupt handling Issuing ATA_CMD_SET_FEATURES (0xef) times out because pdc20621_interrupt ignores command completion since ATA_TFLAG_POLLING flag is set. This has already been fixed for sata_promise: commit 51b94d2a5a90d4800e74d7348bcde098a28f4fb3 Author: Tejun Heo Date: Fri Jun 8 13:46:55 2007 -0700 sata_promise: use TF interface for polling NODATA commands Also, this patch includes Mikael's original patches: http://marc.info/?l=linux-ide&m=121135828227724&w=2 http://marc.info/?l=linux-ide&m=121144512109826&w=2 Signed-off-by: Mikael Pettersson Signed-off-by: David Milburn Signed-off-by: Jeff Garzik --- drivers/ata/sata_sx4.c | 22 +++++++++------------- 1 file changed, 9 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c index 1ce98afa69b6..eb05a3c82a9e 100644 --- a/drivers/ata/sata_sx4.c +++ b/drivers/ata/sata_sx4.c @@ -687,8 +687,11 @@ static void pdc20621_packet_start(struct ata_queued_cmd *qc) static unsigned int pdc20621_qc_issue(struct ata_queued_cmd *qc) { switch (qc->tf.protocol) { - case ATA_PROT_DMA: case ATA_PROT_NODATA: + if (qc->tf.flags & ATA_TFLAG_POLLING) + break; + /*FALLTHROUGH*/ + case ATA_PROT_DMA: pdc20621_packet_start(qc); return 0; @@ -787,12 +790,7 @@ static inline unsigned int pdc20621_host_intr(struct ata_port *ap, static void pdc20621_irq_clear(struct ata_port *ap) { - struct ata_host *host = ap->host; - void __iomem *mmio = host->iomap[PDC_MMIO_BAR]; - - mmio += PDC_CHIP0_OFS; - - readl(mmio + PDC_20621_SEQMASK); + ioread8(ap->ioaddr.status_addr); } static irqreturn_t pdc20621_interrupt(int irq, void *dev_instance) @@ -877,14 +875,12 @@ static void pdc_freeze(struct ata_port *ap) static void pdc_thaw(struct ata_port *ap) { void __iomem *mmio = ap->ioaddr.cmd_addr; - void __iomem *mmio_base; u32 tmp; /* FIXME: start HDMA engine, if zero ATA engines running */ - /* reading SEQ mask register clears IRQ */ - mmio_base = ap->host->iomap[PDC_MMIO_BAR] + PDC_CHIP0_OFS; - readl(mmio_base + PDC_20621_SEQMASK); + /* clear IRQ */ + ioread8(ap->ioaddr.status_addr); /* turn IRQ back on */ tmp = readl(mmio + PDC_CTLSTAT); @@ -974,7 +970,7 @@ static int pdc_check_atapi_dma(struct ata_queued_cmd *qc) static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf) { WARN_ON(tf->protocol == ATA_PROT_DMA || - tf->protocol == ATA_PROT_NODATA); + tf->protocol == ATAPI_PROT_DMA); ata_sff_tf_load(ap, tf); } @@ -982,7 +978,7 @@ static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf) static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf) { WARN_ON(tf->protocol == ATA_PROT_DMA || - tf->protocol == ATA_PROT_NODATA); + tf->protocol == ATAPI_PROT_DMA); ata_sff_exec_command(ap, tf); } -- cgit v1.2.3 From f48c019f1550aea7a3a1227efb9901916f5cd30d Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 13 May 2009 22:10:50 -0500 Subject: sata_fsl: Fix compile warnings We we build with dma_addr_t as a 64-bit quantity we get: drivers/ata/sata_fsl.c: In function 'sata_fsl_fill_sg': drivers/ata/sata_fsl.c:340: warning: format '%x' expects type 'unsigned int', but argument 4 has type 'dma_addr_t' Signed-off-by: Kumar Gala Signed-off-by: Jeff Garzik --- drivers/ata/sata_fsl.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index c2e90e1fece0..5edd6549876d 100644 --- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c @@ -332,13 +332,14 @@ static unsigned int sata_fsl_fill_sg(struct ata_queued_cmd *qc, void *cmd_desc, dma_addr_t sg_addr = sg_dma_address(sg); u32 sg_len = sg_dma_len(sg); - VPRINTK("SATA FSL : fill_sg, sg_addr = 0x%x, sg_len = %d\n", - sg_addr, sg_len); + VPRINTK("SATA FSL : fill_sg, sg_addr = 0x%llx, sg_len = %d\n", + (unsigned long long)sg_addr, sg_len); /* warn if each s/g element is not dword aligned */ if (sg_addr & 0x03) ata_port_printk(qc->ap, KERN_ERR, - "s/g addr unaligned : 0x%x\n", sg_addr); + "s/g addr unaligned : 0x%llx\n", + (unsigned long long)sg_addr); if (sg_len & 0x03) ata_port_printk(qc->ap, KERN_ERR, "s/g len unaligned : 0x%x\n", sg_len); -- cgit v1.2.3 From d358724385d9bb3e360f5b95c17ec4f77c913460 Mon Sep 17 00:00:00 2001 From: Dave Liu Date: Thu, 14 May 2009 09:47:07 -0500 Subject: sata_fsl: Fix the command description of FSL SATA controller The bit 11 of command description is reserved bit in Freescale SATA controller and needs to be set to '1'. This is needed to make sure the last write from the controller to the buffer descriptor is seen before an interrupt is raised. Signed-off-by: Dave Liu Signed-off-by: Kumar Gala Signed-off-by: Jeff Garzik --- drivers/ata/sata_fsl.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index 5edd6549876d..36b8629203be 100644 --- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c @@ -205,6 +205,7 @@ struct cmdhdr_tbl_entry { * Description information bitdefs */ enum { + CMD_DESC_RES = (1 << 11), VENDOR_SPECIFIC_BIST = (1 << 10), CMD_DESC_SNOOP_ENABLE = (1 << 9), FPDMA_QUEUED_CMD = (1 << 8), @@ -388,7 +389,7 @@ static void sata_fsl_qc_prep(struct ata_queued_cmd *qc) void __iomem *hcr_base = host_priv->hcr_base; unsigned int tag = sata_fsl_tag(qc->tag, hcr_base); struct command_desc *cd; - u32 desc_info = CMD_DESC_SNOOP_ENABLE; + u32 desc_info = CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE; u32 num_prde = 0; u32 ttl_dwords = 0; dma_addr_t cd_paddr; @@ -841,7 +842,7 @@ issue_srst: /* device reset/SRST is a control register update FIS, uses tag0 */ sata_fsl_setup_cmd_hdr_entry(pp, 0, - SRST_CMD | CMD_DESC_SNOOP_ENABLE, 0, 0, 5); + SRST_CMD | CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE, 0, 0, 5); tf.ctl |= ATA_SRST; /* setup SRST bit in taskfile control reg */ ata_tf_to_fis(&tf, pmp, 0, cfis); @@ -887,7 +888,8 @@ issue_srst: * using ATA signature D2H register FIS to the host controller. */ - sata_fsl_setup_cmd_hdr_entry(pp, 0, CMD_DESC_SNOOP_ENABLE, 0, 0, 5); + sata_fsl_setup_cmd_hdr_entry(pp, 0, CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE, + 0, 0, 5); tf.ctl &= ~ATA_SRST; /* 2nd H2D Ctl. register FIS */ ata_tf_to_fis(&tf, pmp, 0, cfis); -- cgit v1.2.3 From 61d79a8eb362f826a002d3d14c4f9a070a818542 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Fri, 15 May 2009 00:40:34 -0400 Subject: libata: Report disk alignment and physical block size For disks with 4KB sectors, report the correct block size and alignment when filling out the READ CAPACITY(16) response. This patch is based upon code from Matthew Wilcox' 4KB ATA tree. I fixed the bug I reported a while back caused by ATA and SCSI using different approaches to describing the alignment. Signed-off-by: Martin K. Petersen Signed-off-by: Jeff Garzik --- drivers/ata/libata-scsi.c | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 68d9132d8f6f..d1718a1f278a 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -2376,7 +2376,23 @@ saving_not_supp: */ static unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf) { - u64 last_lba = args->dev->n_sectors - 1; /* LBA of the last block */ + struct ata_device *dev = args->dev; + u64 last_lba = dev->n_sectors - 1; /* LBA of the last block */ + u8 log_per_phys = 0; + u16 lowest_aligned = 0; + u16 word_106 = dev->id[106]; + u16 word_209 = dev->id[209]; + + if ((word_106 & 0xc000) == 0x4000) { + /* Number and offset of logical sectors per physical sector */ + if (word_106 & (1 << 13)) + log_per_phys = word_106 & 0xf; + if ((word_209 & 0xc000) == 0x4000) { + u16 first = dev->id[209] & 0x3fff; + if (first > 0) + lowest_aligned = (1 << log_per_phys) - first; + } + } VPRINTK("ENTER\n"); @@ -2407,6 +2423,11 @@ static unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf) /* sector size */ rbuf[10] = ATA_SECT_SIZE >> 8; rbuf[11] = ATA_SECT_SIZE & 0xff; + + rbuf[12] = 0; + rbuf[13] = log_per_phys; + rbuf[14] = (lowest_aligned >> 8) & 0x3f; + rbuf[15] = lowest_aligned; } return 0; -- cgit v1.2.3 From 4bca3286433585b5f1c3e7d8ac37a2f4b3def9ca Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Fri, 15 May 2009 00:40:35 -0400 Subject: libata: Media rotation rate and form factor heuristics This patch provides new heuristics for parsing both the form factor and media rotation rate ATA IDENFITY words. The reported ATA version must be 7 or greater and the device must return values defined as valid in the standard. Only then are the characteristics reported to SCSI via the VPD B1 page. This seems like a reasonable compromise to me considering that we have been shipping several kernel releases that key off the rotation rate bit without any version checking whatsoever. With no complaints so far. Signed-off-by: Martin K. Petersen Signed-off-by: Jeff Garzik --- drivers/ata/libata-scsi.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index d1718a1f278a..342316064e9f 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -2142,13 +2142,14 @@ static unsigned int ata_scsiop_inq_89(struct ata_scsi_args *args, u8 *rbuf) static unsigned int ata_scsiop_inq_b1(struct ata_scsi_args *args, u8 *rbuf) { + int form_factor = ata_id_form_factor(args->id); + int media_rotation_rate = ata_id_rotation_rate(args->id); + rbuf[1] = 0xb1; rbuf[3] = 0x3c; - if (ata_id_major_version(args->id) > 7) { - rbuf[4] = args->id[217] >> 8; - rbuf[5] = args->id[217]; - rbuf[7] = args->id[168] & 0xf; - } + rbuf[4] = media_rotation_rate >> 8; + rbuf[5] = media_rotation_rate; + rbuf[7] = form_factor; return 0; } -- cgit v1.2.3 From 975b3c474c13d29337eaf7da8f5f5c0299e4943f Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Fri, 15 May 2009 22:27:49 -0400 Subject: ACPI: resume: re-enable SCI-enable workaround The BIOS bug workaround mistakenly got disabled when we followed the ACPI specification more closely by ignoring OS updates to that bit. (The BIOS is supposed to update SCI_EN, not the OS) http://bugzilla.kernel.org/show_bug.cgi?id=13289 Signed-off-by: Lin Ming Signed-off-by: Len Brown --- drivers/acpi/acpica/aclocal.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h index 772ee5c4ccca..2ec394a328e9 100644 --- a/drivers/acpi/acpica/aclocal.h +++ b/drivers/acpi/acpica/aclocal.h @@ -787,7 +787,12 @@ struct acpi_bit_register_info { /* For control registers, both ignored and reserved bits must be preserved */ -#define ACPI_PM1_CONTROL_IGNORED_BITS 0x0201 /* Bits 9, 0(SCI_EN) */ +/* + * The ACPI spec says to ignore PM1_CTL.SCI_EN (bit 0) + * but we need to be able to write ACPI_BITREG_SCI_ENABLE directly + * as a BIOS workaround on some machines. + */ +#define ACPI_PM1_CONTROL_IGNORED_BITS 0x0200 /* Bits 9 */ #define ACPI_PM1_CONTROL_RESERVED_BITS 0xC1F8 /* Bits 14-15, 3-8 */ #define ACPI_PM1_CONTROL_PRESERVED_BITS \ (ACPI_PM1_CONTROL_IGNORED_BITS | ACPI_PM1_CONTROL_RESERVED_BITS) -- cgit v1.2.3 From 815ab0fd40579ad2aa42058298073503648762b9 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Thu, 7 May 2009 22:19:45 -0400 Subject: ACPI: suspend: restore BM_RLD on resume In 2.6.29, 31878dd86b7df9a147f5e6cc6e07092b4308782b "ACPI: remove BM_RLD access from idle entry path" moved BM_RLD initialization to init-time from run time. But we discovered that some BIOS do not restore BM_RLD after suspend, causing device errors on C3 and C4 after resume. So now the kernel restores BM_RLD. http://bugzilla.kernel.org/show_bug.cgi?id=13032 Signed-off-by: Len Brown --- drivers/acpi/processor_idle.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'drivers') diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index f7ca8c55956b..c1d59cfdb5fb 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -202,15 +202,38 @@ static void acpi_state_timer_broadcast(struct acpi_processor *pr, * Suspend / resume control */ static int acpi_idle_suspend; +static u32 saved_bm_rld; + +static void acpi_idle_bm_rld_save(void) +{ + acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &saved_bm_rld); +} +static void acpi_idle_bm_rld_restore(void) +{ + u32 resumed_bm_rld; + + acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &resumed_bm_rld); + + if (resumed_bm_rld != saved_bm_rld) + acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, saved_bm_rld); +} int acpi_processor_suspend(struct acpi_device * device, pm_message_t state) { + if (acpi_idle_suspend == 1) + return 0; + + acpi_idle_bm_rld_save(); acpi_idle_suspend = 1; return 0; } int acpi_processor_resume(struct acpi_device * device) { + if (acpi_idle_suspend == 0) + return 0; + + acpi_idle_bm_rld_restore(); acpi_idle_suspend = 0; return 0; } -- cgit v1.2.3 From ecb4aed78dcf09e48c8c34c8c2fa7f5c69344be6 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 24 Apr 2009 11:33:47 -0400 Subject: ACPI, i915: build fix drivers/built-in.o: In function `intel_opregion_init': (.text+0x9d540): undefined reference to `acpi_video_register' http://bugzilla.kernel.org/show_bug.cgi?id=13165 Signed-off-by: Len Brown --- drivers/gpu/drm/Kconfig | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 3a22eb9be378..f33d25279912 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -83,6 +83,12 @@ config DRM_I915 config DRM_I915_KMS bool "Enable modesetting on intel by default" depends on DRM_I915 + # i915 KMS depends on ACPI_VIDEO when ACPI is enabled + # but for select to work, need to select ACPI_VIDEO's dependencies, ick + select VIDEO_OUTPUT_CONTROL if ACPI + select BACKLIGHT_CLASS_DEVICE if ACPI + select INPUT if ACPI + select ACPI_VIDEO if ACPI help Choose this option if you want kernel modesetting enabled by default, and you have a new enough userspace to support this. Running old -- cgit v1.2.3 From 56c213fa012f2bad9eff908292ff2500f840b020 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Mon, 11 May 2009 09:35:57 +0800 Subject: ACPI processor: introduce module parameter processor.ignore_tpc Introduce module parameter processor.ignore_tpc. Some laptops are shipped with buggy _TPC, this module parameter is used to to disable the buggy support. http://bugzilla.kernel.org/show_bug.cgi?id=13259 Signed-off-by: Zhang Rui Tested-by: James Ettle Signed-off-by: Len Brown --- drivers/acpi/processor_throttling.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'drivers') diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index d0d1f4d50434..5f09fb8c0e05 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -45,6 +45,14 @@ #define _COMPONENT ACPI_PROCESSOR_COMPONENT ACPI_MODULE_NAME("processor_throttling"); +/* ignore_tpc: + * 0 -> acpi processor driver doesn't ignore _TPC values + * 1 -> acpi processor driver ignores _TPC values + */ +static int ignore_tpc; +module_param(ignore_tpc, int, 0644); +MODULE_PARM_DESC(ignore_tpc, "Disable broken BIOS _TPC throttling support"); + struct throttling_tstate { unsigned int cpu; /* cpu nr */ int target_state; /* target T-state */ @@ -283,6 +291,10 @@ static int acpi_processor_get_platform_limit(struct acpi_processor *pr) if (!pr) return -EINVAL; + + if (ignore_tpc) + goto end; + status = acpi_evaluate_integer(pr->handle, "_TPC", NULL, &tpc); if (ACPI_FAILURE(status)) { if (status != AE_NOT_FOUND) { @@ -290,6 +302,8 @@ static int acpi_processor_get_platform_limit(struct acpi_processor *pr) } return -ENODEV; } + +end: pr->throttling_platform_limit = (int)tpc; return 0; } @@ -302,6 +316,9 @@ int acpi_processor_tstate_has_changed(struct acpi_processor *pr) struct acpi_processor_limit *limit; int target_state; + if (ignore_tpc) + return 0; + result = acpi_processor_get_platform_limit(pr); if (result) { /* Throttling Limit is unsupported */ -- cgit v1.2.3 From 4973b22aa8c70fe036e3e0039f104cf5bb7fe2b1 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Mon, 11 May 2009 09:36:01 +0800 Subject: ACPI processor: reset the throttling state once it's invalid If the BIOS hands us an invalid throttling state, write a valid state. http://bugzilla.kernel.org/show_bug.cgi?id=13259 Signed-off-by: Zhang Rui Tested-by: James Ettle Signed-off-by: Len Brown --- drivers/acpi/processor_throttling.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index 5f09fb8c0e05..7f16f5f8e7d3 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -838,6 +838,14 @@ static int acpi_processor_get_throttling_ptc(struct acpi_processor *pr) ret = acpi_read_throttling_status(pr, &value); if (ret >= 0) { state = acpi_get_throttling_state(pr, value); + if (state == -1) { + ACPI_WARNING((AE_INFO, + "Invalid throttling state, reset\n")); + state = 0; + ret = acpi_processor_set_throttling(pr, state); + if (ret) + return ret; + } pr->throttling.state = state; } -- cgit v1.2.3 From 520daf7217bc1806c02eb4cfa7805447a3da2f66 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Thu, 14 May 2009 17:27:38 -0400 Subject: ACPI: idle: fix init-time TSC check regression A previous 2.6.30 patch, a71e4917dc0ebbcb5a0ecb7ca3486643c1c9a6e2, (ACPI: idle: mark_tsc_unstable() at init-time, not run-time) erroneously disabled the TSC on systems that did not actually have valid deep C-states. Move the check after the deep-C-states are validated, via new helper, tsc_check_state(), hich replaces tsc_halts_in_c(). Signed-off-by: Len Brown Acked-by: Venkatesh Pallipadi Acked-by: Thomas Gleixner Tested-by: Frans Pop --- drivers/acpi/processor_idle.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index f7ca8c55956b..e39a40a2ceae 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -216,7 +216,7 @@ int acpi_processor_resume(struct acpi_device * device) } #if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86) -static int tsc_halts_in_c(int state) +static void tsc_check_state(int state) { switch (boot_cpu_data.x86_vendor) { case X86_VENDOR_AMD: @@ -226,13 +226,17 @@ static int tsc_halts_in_c(int state) * C/P/S0/S1 states when this bit is set. */ if (boot_cpu_has(X86_FEATURE_NONSTOP_TSC)) - return 0; + return; /*FALL THROUGH*/ default: - return state > ACPI_STATE_C1; + /* TSC could halt in idle, so notify users */ + if (state > ACPI_STATE_C1) + mark_tsc_unstable("TSC halts in idle"); } } +#else +static void tsc_check_state(int state) { return; } #endif static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr) @@ -581,11 +585,6 @@ static int acpi_processor_power_verify(struct acpi_processor *pr) for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) { struct acpi_processor_cx *cx = &pr->power.states[i]; -#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86) - /* TSC could halt in idle, so notify users */ - if (tsc_halts_in_c(cx->type)) - mark_tsc_unstable("TSC halts in idle");; -#endif switch (cx->type) { case ACPI_STATE_C1: cx->valid = 1; @@ -603,6 +602,8 @@ static int acpi_processor_power_verify(struct acpi_processor *pr) acpi_timer_check_state(i, pr, cx); break; } + if (cx->valid) + tsc_check_state(cx->type); if (cx->valid) working++; -- cgit v1.2.3 From a0bf284bfedd6dc95bbee7ebf5ccf3b5f753a008 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 15 May 2009 01:29:31 -0400 Subject: ACPI: Idle C-states disabled by max_cstate should not disable the TSC Processor idle power states C2 and C3 stop the TSC on many machines. Linux recognizes this situation and marks the TSC as unstable: Marking TSC unstable due to TSC halts in idle But if those same machines are booted with "processor.max_cstate=1", then there is no need to validate C2 and C3, and no need to disable the TSC, which can be reliably used as a clocksource. Signed-off-by: Len Brown Acked-by: Thomas Gleixner --- drivers/acpi/processor_idle.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index e39a40a2ceae..e65476fdf40d 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -582,7 +582,7 @@ static int acpi_processor_power_verify(struct acpi_processor *pr) pr->power.timer_broadcast_on_state = INT_MAX; - for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) { + for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) { struct acpi_processor_cx *cx = &pr->power.states[i]; switch (cx->type) { -- cgit v1.2.3 From 005187eecaa400b4b43d9f640fbde9fcc50f37c1 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Sat, 16 May 2009 08:28:17 -0700 Subject: ARM: OMAP2/3: Change omapfb to use clkdev for dispc and rfbi, v2 This makes the framebuffer work on omap3. Also fix the clk_get usage for checkpatch.pl "ERROR: do not use assignment in if condition". Cc: Imre Deak Cc: linux-fbdev-devel@lists.sourceforge.net Acked-by: Krzysztof Helt Signed-off-by: Tony Lindgren --- drivers/video/omap/dispc.c | 14 ++++++++------ drivers/video/omap/rfbi.c | 8 +++++--- 2 files changed, 13 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c index dfb72f5e4c96..148cbcc39602 100644 --- a/drivers/video/omap/dispc.c +++ b/drivers/video/omap/dispc.c @@ -880,20 +880,22 @@ static irqreturn_t omap_dispc_irq_handler(int irq, void *dev) static int get_dss_clocks(void) { - if (IS_ERR((dispc.dss_ick = clk_get(dispc.fbdev->dev, "dss_ick")))) { - dev_err(dispc.fbdev->dev, "can't get dss_ick\n"); + dispc.dss_ick = clk_get(dispc.fbdev->dev, "ick"); + if (IS_ERR(dispc.dss_ick)) { + dev_err(dispc.fbdev->dev, "can't get ick\n"); return PTR_ERR(dispc.dss_ick); } - if (IS_ERR((dispc.dss1_fck = clk_get(dispc.fbdev->dev, "dss1_fck")))) { + dispc.dss1_fck = clk_get(dispc.fbdev->dev, "dss1_fck"); + if (IS_ERR(dispc.dss1_fck)) { dev_err(dispc.fbdev->dev, "can't get dss1_fck\n"); clk_put(dispc.dss_ick); return PTR_ERR(dispc.dss1_fck); } - if (IS_ERR((dispc.dss_54m_fck = - clk_get(dispc.fbdev->dev, "dss_54m_fck")))) { - dev_err(dispc.fbdev->dev, "can't get dss_54m_fck\n"); + dispc.dss_54m_fck = clk_get(dispc.fbdev->dev, "tv_fck"); + if (IS_ERR(dispc.dss_54m_fck)) { + dev_err(dispc.fbdev->dev, "can't get tv_fck\n"); clk_put(dispc.dss_ick); clk_put(dispc.dss1_fck); return PTR_ERR(dispc.dss_54m_fck); diff --git a/drivers/video/omap/rfbi.c b/drivers/video/omap/rfbi.c index a13c8dcad2a8..9332d6ca6456 100644 --- a/drivers/video/omap/rfbi.c +++ b/drivers/video/omap/rfbi.c @@ -83,12 +83,14 @@ static inline u32 rfbi_read_reg(int idx) static int rfbi_get_clocks(void) { - if (IS_ERR((rfbi.dss_ick = clk_get(rfbi.fbdev->dev, "dss_ick")))) { - dev_err(rfbi.fbdev->dev, "can't get dss_ick\n"); + rfbi.dss_ick = clk_get(rfbi.fbdev->dev, "ick"); + if (IS_ERR(rfbi.dss_ick)) { + dev_err(rfbi.fbdev->dev, "can't get ick\n"); return PTR_ERR(rfbi.dss_ick); } - if (IS_ERR((rfbi.dss1_fck = clk_get(rfbi.fbdev->dev, "dss1_fck")))) { + rfbi.dss1_fck = clk_get(rfbi.fbdev->dev, "dss1_fck"); + if (IS_ERR(rfbi.dss1_fck)) { dev_err(rfbi.fbdev->dev, "can't get dss1_fck\n"); clk_put(rfbi.dss_ick); return PTR_ERR(rfbi.dss1_fck); -- cgit v1.2.3 From 36999a5af1b6c5379e59f0ddf434db08d03c19e4 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:41 +0900 Subject: ide-tape: remove back-to-back REQUEST_SENSE detection Impact: fix an oops which always triggers ide_tape_issue_pc() assumed drive->pc isn't NULL on invocation when checking for back-to-back request sense issues but drive->pc can be NULL and even when it's not NULL, it's not safe to dereference it once the previous command is complete because pc could have been freed or was on stack. Kill back-to-back REQUEST_SENSE detection. Signed-off-by: Tejun Heo Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index cb942a9b580f..3a53e0834cf7 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -614,12 +614,6 @@ static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive, { idetape_tape_t *tape = drive->driver_data; - if (drive->pc->c[0] == REQUEST_SENSE && - pc->c[0] == REQUEST_SENSE) { - printk(KERN_ERR "ide-tape: possible ide-tape.c bug - " - "Two request sense in serial were issued\n"); - } - if (drive->failed_pc == NULL && pc->c[0] != REQUEST_SENSE) drive->failed_pc = pc; -- cgit v1.2.3 From b019447ce73513432af052f30fa239d6dc93e111 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 16 May 2009 19:03:36 +0200 Subject: icside: register second channel of version 6 PCB The second IDE channel of version 6 PCB is not being registered anymore since the commit 48c3c1072651922ed153bcf0a33ea82cf20df390 (ide: add struct ide_host (take 3)). Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/icside.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c index 4e16ce68b063..36da913cc553 100644 --- a/drivers/ide/icside.c +++ b/drivers/ide/icside.c @@ -466,7 +466,7 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec) struct ide_host *host; unsigned int sel = 0; int ret; - hw_regs_t hw[2], *hws[] = { &hw[0], NULL, NULL, NULL }; + hw_regs_t hw[2], *hws[] = { &hw[0], &hw[1], NULL, NULL }; struct ide_port_info d = icside_v6_port_info; ioc_base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0); -- cgit v1.2.3 From d8788298d491ee5026981eb751b0341a996b22e4 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Sat, 16 May 2009 19:03:36 +0200 Subject: piix: The Sony TZ90 needs the cable type hardcoding The Sony TZ90 needs the cable type hardcoding. See bug #12734 Signed-off-by: Alan Cox Reported-by: Jonathan E. Snow [bart: port it from ata_piix to piix and give reporter the proper credit] Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/piix.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/ide/piix.c b/drivers/ide/piix.c index 2aa699933064..69860dea3820 100644 --- a/drivers/ide/piix.c +++ b/drivers/ide/piix.c @@ -263,6 +263,7 @@ static const struct ich_laptop ich_laptop[] = { { 0x24CA, 0x1025, 0x003d }, /* ICH4 on ACER TM290 */ { 0x266F, 0x1025, 0x0066 }, /* ICH6 on ACER Aspire 1694WLMi */ { 0x2653, 0x1043, 0x82D8 }, /* ICH6M on Asus Eee 701 */ + { 0x27df, 0x104d, 0x900e }, /* ICH7 on Sony TZ-90 */ /* end marker */ { 0, } }; -- cgit v1.2.3 From 72876a603422d3767273ffb3918033fa1bfda0f3 Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Sun, 17 May 2009 20:48:59 -0700 Subject: mlx4_en: Fix not deleted napi structures Napi structures are being created each time we open a port, but when the port is closed the napi structure is only disabled but not removed. This bug caused hang while removing the driver. Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller --- drivers/net/mlx4/en_cq.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/mlx4/en_cq.c b/drivers/net/mlx4/en_cq.c index 91f50de84be9..a276125b709b 100644 --- a/drivers/net/mlx4/en_cq.c +++ b/drivers/net/mlx4/en_cq.c @@ -125,8 +125,10 @@ void mlx4_en_deactivate_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq) if (cq->is_tx) del_timer(&cq->timer); - else + else { napi_disable(&cq->napi); + netif_napi_del(&cq->napi); + } mlx4_cq_free(mdev->dev, &cq->mcq); } -- cgit v1.2.3 From a8f492c6ac6072d6c5bce4b2f13dc44612991051 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 16 May 2009 01:21:58 +0000 Subject: NET: Meth: Fix unsafe mix of irq and non-irq spinlocks. Mixing of normal and irq spinlocks results in the following lockdep messages on bootup on IP32: [...] Sending DHCP requests . ====================================================== [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] 2.6.30-rc5-00164-g41baeef #30 ------------------------------------------------------ swapper/1 [HC0[0]:SC0[1]:HE0:SE0] is trying to acquire: (&priv->meth_lock){+.+...}, at: [] meth_tx+0x48/0x43c and this task is already holding: (_xmit_ETHER#2){+.-...}, at: [] __qdisc_run+0x118/0x30c which would create a new lock dependency: (_xmit_ETHER#2){+.-...} -> (&priv->meth_lock){+.+...} but this new dependency connects a SOFTIRQ-irq-safe lock: (_xmit_ETHER#2){+.-...} ... which became SOFTIRQ-irq-safe at: [] __lock_acquire+0x784/0x1a14 [] lock_acquire+0xf8/0x150 [] _spin_lock+0x30/0x44 [] dev_watchdog+0x70/0x398 [] run_timer_softirq+0x1a8/0x248 [] __do_softirq+0xec/0x208 [] do_softirq+0x60/0xe4 [] irq_exit+0x54/0x9c [] ret_from_irq+0x0/0x4 [] r4k_wait+0x20/0x40 [] cpu_idle+0x30/0x60 [] start_kernel+0x3ec/0x404 to a SOFTIRQ-irq-unsafe lock: (&priv->meth_lock){+.+...} ... which became SOFTIRQ-irq-unsafe at: ... [] __lock_acquire+0x824/0x1a14 [] lock_acquire+0xf8/0x150 [] _spin_lock+0x30/0x44 [] meth_reset+0x118/0x2d8 [] meth_open+0x28/0x140 [] dev_open+0xe0/0x18c [] dev_change_flags+0xd8/0x1d4 [] ip_auto_config+0x1d4/0xf28 [] do_one_initcall+0x58/0x170 [] kernel_init+0x98/0x104 [] kernel_thread_helper+0x10/0x18 other info that might help us debug this: 2 locks held by swapper/1: #0: (rcu_read_lock){.+.+..}, at: [] dev_queue_xmit+0x1e0/0x4b0 #1: (_xmit_ETHER#2){+.-...}, at: [] __qdisc_run+0x118/0x30c the SOFTIRQ-irq-safe lock's dependencies: -> (_xmit_ETHER#2){+.-...} ops: 0 { HARDIRQ-ON-W at: [] __lock_acquire+0x7fc/0x1a14 [] lock_acquire+0xf8/0x150 [] _spin_lock+0x30/0x44 [] dev_watchdog+0x70/0x398 [] run_timer_softirq+0x1a8/0x248 [] __do_softirq+0xec/0x208 [] do_softirq+0x60/0xe4 [] irq_exit+0x54/0x9c [] ret_from_irq+0x0/0x4 [] r4k_wait+0x20/0x40 [] cpu_idle+0x30/0x60 [] start_kernel+0x3ec/0x404 IN-SOFTIRQ-W at: [] __lock_acquire+0x784/0x1a14 [] lock_acquire+0xf8/0x150 [] _spin_lock+0x30/0x44 [] dev_watchdog+0x70/0x398 [] run_timer_softirq+0x1a8/0x248 [] __do_softirq+0xec/0x208 [] do_softirq+0x60/0xe4 [] irq_exit+0x54/0x9c [] ret_from_irq+0x0/0x4 [] r4k_wait+0x20/0x40 [] cpu_idle+0x30/0x60 [] start_kernel+0x3ec/0x404 INITIAL USE at: [] __lock_acquire+0x89c/0x1a14 [] lock_acquire+0xf8/0x150 [] _spin_lock+0x30/0x44 [] dev_watchdog+0x70/0x398 [] run_timer_softirq+0x1a8/0x248 [] __do_softirq+0xec/0x208 [] do_softirq+0x60/0xe4 [] irq_exit+0x54/0x9c [] ret_from_irq+0x0/0x4 [] r4k_wait+0x20/0x40 [] cpu_idle+0x30/0x60 [] start_kernel+0x3ec/0x404 } ... key at: [] netdev_xmit_lock_key+0x8/0x1c8 the SOFTIRQ-irq-unsafe lock's dependencies: -> (&priv->meth_lock){+.+...} ops: 0 { HARDIRQ-ON-W at: [] __lock_acquire+0x7fc/0x1a14 [] lock_acquire+0xf8/0x150 [] _spin_lock+0x30/0x44 [] meth_reset+0x118/0x2d8 [] meth_open+0x28/0x140 [] dev_open+0xe0/0x18c [] dev_change_flags+0xd8/0x1d4 [] ip_auto_config+0x1d4/0xf28 [] do_one_initcall+0x58/0x170 [] kernel_init+0x98/0x104 [] kernel_thread_helper+0x10/0x18 SOFTIRQ-ON-W at: [] __lock_acquire+0x824/0x1a14 [] lock_acquire+0xf8/0x150 [] _spin_lock+0x30/0x44 [] meth_reset+0x118/0x2d8 [] meth_open+0x28/0x140 [] dev_open+0xe0/0x18c [] dev_change_flags+0xd8/0x1d4 [] ip_auto_config+0x1d4/0xf28 [] do_one_initcall+0x58/0x170 [] kernel_init+0x98/0x104 [] kernel_thread_helper+0x10/0x18 INITIAL USE at: [] __lock_acquire+0x89c/0x1a14 [] lock_acquire+0xf8/0x150 [] _spin_lock+0x30/0x44 [] meth_reset+0x118/0x2d8 [] meth_open+0x28/0x140 [] dev_open+0xe0/0x18c [] dev_change_flags+0xd8/0x1d4 [] ip_auto_config+0x1d4/0xf28 [] do_one_initcall+0x58/0x170 [] kernel_init+0x98/0x104 [] kernel_thread_helper+0x10/0x18 } ... key at: [] __key.32424+0x0/0x8 stack backtrace: Call Trace: [] dump_stack+0x8/0x34 [] check_usage+0x470/0x4a0 [] check_irq_usage+0x90/0x130 [] __lock_acquire+0x12a4/0x1a14 [] lock_acquire+0xf8/0x150 [] _spin_lock_irqsave+0x60/0x84 [] meth_tx+0x48/0x43c [] __qdisc_run+0x150/0x30c [] dev_queue_xmit+0x334/0x4b0 [] ip_auto_config+0x8d0/0xf28 [] do_one_initcall+0x58/0x170 [] kernel_init+0x98/0x104 [] kernel_thread_helper+0x10/0x18 ..... timed out! IP-Config: Retrying forever (NFS root)... Sending DHCP requests ., OK [...] Fixed by converting all locks to irq locks. Signed-off-by: Ralf Baechle Tested-by: Andrew Randrianasulu Signed-off-by: David S. Miller --- drivers/net/meth.c | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/net/meth.c b/drivers/net/meth.c index aa08987f6e81..dbd3436912b8 100644 --- a/drivers/net/meth.c +++ b/drivers/net/meth.c @@ -127,11 +127,11 @@ static unsigned long mdio_read(struct meth_private *priv, unsigned long phyreg) static int mdio_probe(struct meth_private *priv) { int i; - unsigned long p2, p3; + unsigned long p2, p3, flags; /* check if phy is detected already */ if(priv->phy_addr>=0&&priv->phy_addr<32) return 0; - spin_lock(&priv->meth_lock); + spin_lock_irqsave(&priv->meth_lock, flags); for (i=0;i<32;++i){ priv->phy_addr=i; p2=mdio_read(priv,2); @@ -157,7 +157,7 @@ static int mdio_probe(struct meth_private *priv) break; } } - spin_unlock(&priv->meth_lock); + spin_unlock_irqrestore(&priv->meth_lock, flags); if(priv->phy_addr<32) { return 0; } @@ -373,14 +373,14 @@ static int meth_release(struct net_device *dev) static void meth_rx(struct net_device* dev, unsigned long int_status) { struct sk_buff *skb; - unsigned long status; + unsigned long status, flags; struct meth_private *priv = netdev_priv(dev); unsigned long fifo_rptr = (int_status & METH_INT_RX_RPTR_MASK) >> 8; - spin_lock(&priv->meth_lock); + spin_lock_irqsave(&priv->meth_lock, flags); priv->dma_ctrl &= ~METH_DMA_RX_INT_EN; mace->eth.dma_ctrl = priv->dma_ctrl; - spin_unlock(&priv->meth_lock); + spin_unlock_irqrestore(&priv->meth_lock, flags); if (int_status & METH_INT_RX_UNDERFLOW) { fifo_rptr = (fifo_rptr - 1) & 0x0f; @@ -452,12 +452,12 @@ static void meth_rx(struct net_device* dev, unsigned long int_status) mace->eth.rx_fifo = priv->rx_ring_dmas[priv->rx_write]; ADVANCE_RX_PTR(priv->rx_write); } - spin_lock(&priv->meth_lock); + spin_lock_irqsave(&priv->meth_lock, flags); /* In case there was underflow, and Rx DMA was disabled */ priv->dma_ctrl |= METH_DMA_RX_INT_EN | METH_DMA_RX_EN; mace->eth.dma_ctrl = priv->dma_ctrl; mace->eth.int_stat = METH_INT_RX_THRESHOLD; - spin_unlock(&priv->meth_lock); + spin_unlock_irqrestore(&priv->meth_lock, flags); } static int meth_tx_full(struct net_device *dev) @@ -470,11 +470,11 @@ static int meth_tx_full(struct net_device *dev) static void meth_tx_cleanup(struct net_device* dev, unsigned long int_status) { struct meth_private *priv = netdev_priv(dev); - unsigned long status; + unsigned long status, flags; struct sk_buff *skb; unsigned long rptr = (int_status&TX_INFO_RPTR) >> 16; - spin_lock(&priv->meth_lock); + spin_lock_irqsave(&priv->meth_lock, flags); /* Stop DMA notification */ priv->dma_ctrl &= ~(METH_DMA_TX_INT_EN); @@ -527,12 +527,13 @@ static void meth_tx_cleanup(struct net_device* dev, unsigned long int_status) } mace->eth.int_stat = METH_INT_TX_EMPTY | METH_INT_TX_PKT; - spin_unlock(&priv->meth_lock); + spin_unlock_irqrestore(&priv->meth_lock, flags); } static void meth_error(struct net_device* dev, unsigned status) { struct meth_private *priv = netdev_priv(dev); + unsigned long flags; printk(KERN_WARNING "meth: error status: 0x%08x\n",status); /* check for errors too... */ @@ -547,7 +548,7 @@ static void meth_error(struct net_device* dev, unsigned status) printk(KERN_WARNING "meth: Rx overflow\n"); if (status & (METH_INT_RX_UNDERFLOW)) { printk(KERN_WARNING "meth: Rx underflow\n"); - spin_lock(&priv->meth_lock); + spin_lock_irqsave(&priv->meth_lock, flags); mace->eth.int_stat = METH_INT_RX_UNDERFLOW; /* more underflow interrupts will be delivered, * effectively throwing us into an infinite loop. @@ -555,7 +556,7 @@ static void meth_error(struct net_device* dev, unsigned status) priv->dma_ctrl &= ~METH_DMA_RX_EN; mace->eth.dma_ctrl = priv->dma_ctrl; DPRINTK("Disabled meth Rx DMA temporarily\n"); - spin_unlock(&priv->meth_lock); + spin_unlock_irqrestore(&priv->meth_lock, flags); } mace->eth.int_stat = METH_INT_ERROR; } -- cgit v1.2.3 From 4cd6fe1c6483cde93e2ec91f58b7af9c9eea51ad Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 15 May 2009 08:44:32 +0000 Subject: bonding: fix link down handling in 802.3ad mode One of the purposes of bonding is to allow for redundant links, and failover correctly if the cable is pulled. If all the members of a bonded device have no carrier present, the bonded device itself needs to report no carrier present to user space so management tools (like routing daemons) can respond. Bonding in 802.3ad mode does not work correctly for this because it incorrectly chooses a link that is down as a possible aggregator. Signed-off-by: Stephen Hemminger Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller --- drivers/net/bonding/bond_3ad.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index 8c2e5ab51f08..faf094abef7f 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -1465,6 +1465,12 @@ static struct aggregator *ad_agg_selection_test(struct aggregator *best, return best; } +static int agg_device_up(const struct aggregator *agg) +{ + return (netif_running(agg->slave->dev) && + netif_carrier_ok(agg->slave->dev)); +} + /** * ad_agg_selection_logic - select an aggregation group for a team * @aggregator: the aggregator we're looking at @@ -1496,14 +1502,13 @@ static void ad_agg_selection_logic(struct aggregator *agg) struct port *port; origin = agg; - active = __get_active_agg(agg); - best = active; + best = (active && agg_device_up(active)) ? active : NULL; do { agg->is_active = 0; - if (agg->num_of_ports) + if (agg->num_of_ports && agg_device_up(agg)) best = ad_agg_selection_test(best, agg); } while ((agg = __get_next_agg(agg))); -- cgit v1.2.3 From eb0519b5a1cf07d5a1b919cffa0304cdaaa97a7e Mon Sep 17 00:00:00 2001 From: Gabriel Paubert Date: Sun, 17 May 2009 21:16:47 -0700 Subject: mv643xx_eth: fix PPC DMA breakage After 2.6.29, PPC no more admits passing NULL to the dev parameter of the DMA API. The result is a BUG followed by solid lock-up when the mv643xx_eth driver brings an interface up. The following patch makes the driver work on my Pegasos again; it is mostly a search and replace of NULL by mp->dev->dev.parent in dma allocation/freeing/mapping/unmapping functions. Signed-off-by: Gabriel Paubert Acked-by: Lennert Buytenhek Signed-off-by: David S. Miller --- drivers/net/mv643xx_eth.c | 41 ++++++++++++++++++++++------------------- 1 file changed, 22 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index a400d7115f78..6bb5af35eda6 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -569,7 +569,7 @@ static int rxq_process(struct rx_queue *rxq, int budget) if (rxq->rx_curr_desc == rxq->rx_ring_size) rxq->rx_curr_desc = 0; - dma_unmap_single(NULL, rx_desc->buf_ptr, + dma_unmap_single(mp->dev->dev.parent, rx_desc->buf_ptr, rx_desc->buf_size, DMA_FROM_DEVICE); rxq->rx_desc_count--; rx++; @@ -678,8 +678,9 @@ static int rxq_refill(struct rx_queue *rxq, int budget) rx_desc = rxq->rx_desc_area + rx; - rx_desc->buf_ptr = dma_map_single(NULL, skb->data, - mp->skb_size, DMA_FROM_DEVICE); + rx_desc->buf_ptr = dma_map_single(mp->dev->dev.parent, + skb->data, mp->skb_size, + DMA_FROM_DEVICE); rx_desc->buf_size = mp->skb_size; rxq->rx_skb[rx] = skb; wmb(); @@ -718,6 +719,7 @@ static inline unsigned int has_tiny_unaligned_frags(struct sk_buff *skb) static void txq_submit_frag_skb(struct tx_queue *txq, struct sk_buff *skb) { + struct mv643xx_eth_private *mp = txq_to_mp(txq); int nr_frags = skb_shinfo(skb)->nr_frags; int frag; @@ -746,10 +748,10 @@ static void txq_submit_frag_skb(struct tx_queue *txq, struct sk_buff *skb) desc->l4i_chk = 0; desc->byte_cnt = this_frag->size; - desc->buf_ptr = dma_map_page(NULL, this_frag->page, - this_frag->page_offset, - this_frag->size, - DMA_TO_DEVICE); + desc->buf_ptr = dma_map_page(mp->dev->dev.parent, + this_frag->page, + this_frag->page_offset, + this_frag->size, DMA_TO_DEVICE); } } @@ -826,7 +828,8 @@ no_csum: desc->l4i_chk = l4i_chk; desc->byte_cnt = length; - desc->buf_ptr = dma_map_single(NULL, skb->data, length, DMA_TO_DEVICE); + desc->buf_ptr = dma_map_single(mp->dev->dev.parent, skb->data, + length, DMA_TO_DEVICE); __skb_queue_tail(&txq->tx_skb, skb); @@ -956,10 +959,10 @@ static int txq_reclaim(struct tx_queue *txq, int budget, int force) } if (cmd_sts & TX_FIRST_DESC) { - dma_unmap_single(NULL, desc->buf_ptr, + dma_unmap_single(mp->dev->dev.parent, desc->buf_ptr, desc->byte_cnt, DMA_TO_DEVICE); } else { - dma_unmap_page(NULL, desc->buf_ptr, + dma_unmap_page(mp->dev->dev.parent, desc->buf_ptr, desc->byte_cnt, DMA_TO_DEVICE); } @@ -1894,9 +1897,9 @@ static int rxq_init(struct mv643xx_eth_private *mp, int index) mp->rx_desc_sram_size); rxq->rx_desc_dma = mp->rx_desc_sram_addr; } else { - rxq->rx_desc_area = dma_alloc_coherent(NULL, size, - &rxq->rx_desc_dma, - GFP_KERNEL); + rxq->rx_desc_area = dma_alloc_coherent(mp->dev->dev.parent, + size, &rxq->rx_desc_dma, + GFP_KERNEL); } if (rxq->rx_desc_area == NULL) { @@ -1947,7 +1950,7 @@ out_free: if (index == 0 && size <= mp->rx_desc_sram_size) iounmap(rxq->rx_desc_area); else - dma_free_coherent(NULL, size, + dma_free_coherent(mp->dev->dev.parent, size, rxq->rx_desc_area, rxq->rx_desc_dma); @@ -1979,7 +1982,7 @@ static void rxq_deinit(struct rx_queue *rxq) rxq->rx_desc_area_size <= mp->rx_desc_sram_size) iounmap(rxq->rx_desc_area); else - dma_free_coherent(NULL, rxq->rx_desc_area_size, + dma_free_coherent(mp->dev->dev.parent, rxq->rx_desc_area_size, rxq->rx_desc_area, rxq->rx_desc_dma); kfree(rxq->rx_skb); @@ -2007,9 +2010,9 @@ static int txq_init(struct mv643xx_eth_private *mp, int index) mp->tx_desc_sram_size); txq->tx_desc_dma = mp->tx_desc_sram_addr; } else { - txq->tx_desc_area = dma_alloc_coherent(NULL, size, - &txq->tx_desc_dma, - GFP_KERNEL); + txq->tx_desc_area = dma_alloc_coherent(mp->dev->dev.parent, + size, &txq->tx_desc_dma, + GFP_KERNEL); } if (txq->tx_desc_area == NULL) { @@ -2053,7 +2056,7 @@ static void txq_deinit(struct tx_queue *txq) txq->tx_desc_area_size <= mp->tx_desc_sram_size) iounmap(txq->tx_desc_area); else - dma_free_coherent(NULL, txq->tx_desc_area_size, + dma_free_coherent(mp->dev->dev.parent, txq->tx_desc_area_size, txq->tx_desc_area, txq->tx_desc_dma); } -- cgit v1.2.3 From d77dd8d27e73a9277096453eb901aae0bfd4ca3c Mon Sep 17 00:00:00 2001 From: roel kluin Date: Fri, 15 May 2009 10:19:51 +0000 Subject: Neterion: *FIFO1_DMA_ERR set twice, should 2nd be *FIFO2_DMA_ERR? FIFO1_DMA_ERR is set twice, the second should be FIFO2_DMA_ERR. Signed-off-by: Roel Kluin Acked-by: Ram Vepa Signed-off-by: David S. Miller --- drivers/net/vxge/vxge-traffic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/vxge/vxge-traffic.c b/drivers/net/vxge/vxge-traffic.c index 7be0ae10d69b..c2eeac4125f3 100644 --- a/drivers/net/vxge/vxge-traffic.c +++ b/drivers/net/vxge/vxge-traffic.c @@ -115,7 +115,7 @@ enum vxge_hw_status vxge_hw_vpath_intr_enable(struct __vxge_hw_vpath_handle *vp) VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO1_POISON| VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO2_POISON| VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO1_DMA_ERR| - VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO1_DMA_ERR), 0, 32), + VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO2_DMA_ERR), 0, 32), &vp_reg->kdfcctl_errors_mask); __vxge_hw_pio_mem_write32_upper(0, &vp_reg->vpath_ppif_int_mask); -- cgit v1.2.3 From 5b4662f098b47f68d7fcea9b065d1513547fef12 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 15 May 2009 14:50:33 -0400 Subject: regulator: da903x: add missing __devexit_p() The remove function uses __devexit, so the .remove assignment needs __devexit_p() to fix a build error with hotplug disabled. Signed-off-by: Mike Frysinger CC: Liam Girdwood CC: Mike Rapoport CC: Eric Miao Acked-by: Eric Miao Signed-off-by: Liam Girdwood --- drivers/regulator/da903x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/regulator/da903x.c b/drivers/regulator/da903x.c index 72b15495183c..c6628f5a0af7 100644 --- a/drivers/regulator/da903x.c +++ b/drivers/regulator/da903x.c @@ -497,7 +497,7 @@ static struct platform_driver da903x_regulator_driver = { .owner = THIS_MODULE, }, .probe = da903x_regulator_probe, - .remove = da903x_regulator_remove, + .remove = __devexit_p(da903x_regulator_remove), }; static int __init da903x_regulator_init(void) -- cgit v1.2.3 From dbf8c11f821b6ff83302c34f2403b4f7231f50ae Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Mon, 18 May 2009 11:13:54 +0100 Subject: mtd_dataflash: unbreak erase support Commit 5b7f3a50 (fix dataflash 64-bit divisions) unfortunately introduced a typo. Erase addr and len were swapped in the pageaddr calculation, causing the wrong sectors to get erased. Signed-off-by: Peter Korsgaard Acked-by: Artem Bityutskiy Signed-off-by: David Woodhouse Signed-off-by: Linus Torvalds --- drivers/mtd/devices/mtd_dataflash.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c index 62dee54af0a5..43976aa4dbb1 100644 --- a/drivers/mtd/devices/mtd_dataflash.c +++ b/drivers/mtd/devices/mtd_dataflash.c @@ -178,7 +178,7 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr) /* Calculate flash page address; use block erase (for speed) if * we're at a block boundary and need to erase the whole block. */ - pageaddr = div_u64(instr->len, priv->page_size); + pageaddr = div_u64(instr->addr, priv->page_size); do_block = (pageaddr & 0x7) == 0 && instr->len >= blocksize; pageaddr = pageaddr << priv->page_offset; -- cgit v1.2.3 From 80193195f87ebca6d7417516d6edeb3969631c15 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 18 May 2009 13:07:35 +0100 Subject: Fix oops on close of hot-unplugged FTDI serial converter Commit c45d6320 ("fix reference counting of ftdi_private") stopped ftdi_sio_port_remove() from directly freeing the port-private data, with the intention if the port was still open, it would be freed when ftdi_close() is eventually called and releases the last refcount on the structure. That's all very well, but ftdi_sio_port_remove() still contains a call to usb_set_serial_port_data(port, NULL) -- so by the time we get to ftdi_close() for the port which was unplugged, it _still_ oopses on dereferencing that NULL pointer, as it did before (and does in 2.6.29). The fix is just not to clear the private data in ftdi_sio_port_remove(). Then the refcount is properly reduced to zero when the final kref_put() happens in ftdi_close(). Remove a bogus comment too, while we're at it. And stop doing things inside "if (priv)" -- it must _always_ be there. Based loosely on an earlier patch by Daniel Mack, and suggestions by Alan Stern. Signed-off-by: David Woodhouse Tested-by: Daniel Mack Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- drivers/usb/serial/ftdi_sio.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 0ab8474b00cb..d9fcdaedf389 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1487,14 +1487,7 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port) remove_sysfs_attrs(port); - /* all open ports are closed at this point - * (by usbserial.c:__serial_close, which calls ftdi_close) - */ - - if (priv) { - usb_set_serial_port_data(port, NULL); - kref_put(&priv->kref, ftdi_sio_priv_release); - } + kref_put(&priv->kref, ftdi_sio_priv_release); return 0; } -- cgit v1.2.3 From 2b69a8a2b6e5f5d26a038a6494a88a1a776ac88f Mon Sep 17 00:00:00 2001 From: Eric Moore Date: Mon, 18 May 2009 12:57:24 -0600 Subject: [SCSI] mpt2sas: fix driver version inconsistency In Commit commit 3b8b5c9b1f08660583e5dfe095c24170df62f1d2 Author: Eric Moore Date: Tue Apr 21 15:44:27 2009 -0600 [SCSI] mpt2sas : bump driver version to 01.100.02.00 The MPT2SAS_MAJOR_VERSION didn't get bumped from 00 to 01 so applications will see it incorrectly as 00.100.02.00 driver instead of 01.100.02.00. Fix by making MPT2SAS_MAJOR_VERSION match the major number in MPT2SAS_DRIVER_VERSION Signed-off-by: Eric Moore Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_base.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h index babd4cc0cb25..36b1d1052ba1 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.h +++ b/drivers/scsi/mpt2sas/mpt2sas_base.h @@ -69,7 +69,7 @@ #define MPT2SAS_AUTHOR "LSI Corporation " #define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver" #define MPT2SAS_DRIVER_VERSION "01.100.02.00" -#define MPT2SAS_MAJOR_VERSION 00 +#define MPT2SAS_MAJOR_VERSION 01 #define MPT2SAS_MINOR_VERSION 100 #define MPT2SAS_BUILD_VERSION 02 #define MPT2SAS_RELEASE_VERSION 00 -- cgit v1.2.3 From c4ca2374312b4de819dd700e72a68395eddb5fcb Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Mon, 18 May 2009 15:38:55 -0700 Subject: be2net: add two new pci device ids to pci device table Signed-off-by: Ajit Khaparde Signed-off-by: David S. Miller --- drivers/net/benet/be.h | 14 ++++++++++++++ drivers/net/benet/be_main.c | 10 +++++----- 2 files changed, 19 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h index c49ddd08b2aa..b4bb06fdf307 100644 --- a/drivers/net/benet/be.h +++ b/drivers/net/benet/be.h @@ -35,8 +35,22 @@ #define DRV_VER "2.0.348" #define DRV_NAME "be2net" #define BE_NAME "ServerEngines BladeEngine2 10Gbps NIC" +#define OC_NAME "Emulex OneConnect 10Gbps NIC" #define DRV_DESC BE_NAME "Driver" +#define BE_VENDOR_ID 0x19a2 +#define BE_DEVICE_ID1 0x211 +#define OC_DEVICE_ID1 0x700 +#define OC_DEVICE_ID2 0x701 + +static inline char *nic_name(struct pci_dev *pdev) +{ + if (pdev->device == OC_DEVICE_ID1 || pdev->device == OC_DEVICE_ID2) + return OC_NAME; + else + return BE_NAME; +} + /* Number of bytes of an RX frame that are copied to skb->data */ #define BE_HDR_LEN 64 #define BE_MAX_JUMBO_FRAME_SIZE 9018 diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index 30d0c81c989e..5c378b5e8e41 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -28,10 +28,10 @@ static unsigned int rx_frag_size = 2048; module_param(rx_frag_size, uint, S_IRUGO); MODULE_PARM_DESC(rx_frag_size, "Size of a fragment that holds rcvd data."); -#define BE_VENDOR_ID 0x19a2 -#define BE2_DEVICE_ID_1 0x0211 static DEFINE_PCI_DEVICE_TABLE(be_dev_ids) = { - { PCI_DEVICE(BE_VENDOR_ID, BE2_DEVICE_ID_1) }, + { PCI_DEVICE(BE_VENDOR_ID, BE_DEVICE_ID1) }, + { PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID1) }, + { PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID2) }, { 0 } }; MODULE_DEVICE_TABLE(pci, be_dev_ids); @@ -1859,7 +1859,7 @@ static int __devinit be_probe(struct pci_dev *pdev, if (status != 0) goto stats_clean; - dev_info(&pdev->dev, BE_NAME " port %d\n", adapter->port_num); + dev_info(&pdev->dev, "%s port %d\n", nic_name(pdev), adapter->port_num); return 0; stats_clean: @@ -1873,7 +1873,7 @@ rel_reg: disable_dev: pci_disable_device(pdev); do_none: - dev_warn(&pdev->dev, BE_NAME " initialization failed\n"); + dev_err(&pdev->dev, "%s initialization failed\n", nic_name(pdev)); return status; } -- cgit v1.2.3 From 28afea5b2ffaa48f4f43d22ae8edcc384c05df80 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Tue, 19 May 2009 08:25:48 +0200 Subject: xen/blkfront: allow xenbus state transition to Closing->Closed when not Connected This situation can occur when attempting to attach a block device whose backend is an empty physical CD-ROM driver. The backend in this case will go directly from the Initialising state to Closing->Closed. Previously this would result in a NULL pointer deref on info->gd (xenbus_dev_fatal does not return as a1a15ac5 seems to expect) Cc: stable@kernel.org Signed-off-by: Ian Campbell Acked-by: Jeremy Fitzhardinge Signed-off-by: Jens Axboe --- drivers/block/xen-blkfront.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 8f905089b72b..6971a12e8b9b 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -977,8 +977,10 @@ static void backend_changed(struct xenbus_device *dev, break; case XenbusStateClosing: - if (info->gd == NULL) - xenbus_dev_fatal(dev, -ENODEV, "gd is NULL"); + if (info->gd == NULL) { + xenbus_frontend_closed(dev); + break; + } bd = bdget_disk(info->gd, 0); if (bd == NULL) xenbus_dev_fatal(dev, -ENODEV, "bdget failed"); -- cgit v1.2.3 From 31a14400e8f365e5d4d1a0b2a1ef4d5405d6091e Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Tue, 19 May 2009 08:27:42 +0200 Subject: xen/blkfront: fix warning when deleting gendisk on unplug/shutdown Currently blkfront gives a warning when hot unplugging due to calling del_gendisk() with interrupts disabled (due to blkif_io_lock). WARNING: at kernel/softirq.c:124 local_bh_enable+0x36/0x84() Modules linked in: xenfs xen_netfront ext3 jbd mbcache xen_blkfront Pid: 13, comm: xenwatch Not tainted 2.6.29-xs5.5.0.13 #3 Call Trace: [] warn_slowpath+0x80/0xb6 [] xen_sched_clock+0x16/0x63 [] xen_force_evtchn_callback+0xc/0x10 [] check_events+0x8/0xe [] xen_restore_fl_direct_end+0x0/0x1 [] xen_mc_flush+0x10a/0x13f [] __switch_to+0x114/0x14e [] dequeue_task+0x62/0x70 [] finish_task_switch+0x2b/0x84 [] schedule+0x66d/0x6e7 [] xen_force_evtchn_callback+0xc/0x10 [] xen_force_evtchn_callback+0xc/0x10 [] local_bh_enable+0x36/0x84 [] sk_filter+0x57/0x5c [] netlink_broadcast+0x1d5/0x315 [] kobject_uevent_env+0x28d/0x331 [] device_del+0x10f/0x120 [] device_unregister+0x8/0x10 [] bdi_unregister+0x2d/0x39 [] unlink_gendisk+0x23/0x3e [] del_gendisk+0x7b/0xe7 [] blkfront_closing+0x28/0x6e [xen_blkfront] [] backend_changed+0x3ad/0x41d [xen_blkfront] We can fix this by calling del_gendisk() later in blkfront_closing, after releasing blkif_io_lock. Since the queue is stopped during the interrupts disabled phase I don't think there is any danger of an event occuring between releasing the blkif_io_lock and deleting the disk. Signed-off-by: Ian Campbell Cc: Jeremy Fitzhardinge Signed-off-by: Jens Axboe --- drivers/block/xen-blkfront.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 6971a12e8b9b..a6cbf7b808e6 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -934,8 +934,6 @@ static void blkfront_closing(struct xenbus_device *dev) spin_lock_irqsave(&blkif_io_lock, flags); - del_gendisk(info->gd); - /* No more blkif_request(). */ blk_stop_queue(info->rq); @@ -949,6 +947,8 @@ static void blkfront_closing(struct xenbus_device *dev) blk_cleanup_queue(info->rq); info->rq = NULL; + del_gendisk(info->gd); + out: xenbus_frontend_closed(dev); } -- cgit v1.2.3 From 8e7d2b2c6ecd3c21a54b877eae3d5be48292e6b5 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Fri, 8 May 2009 16:13:25 -0700 Subject: drm/i915: allocate large pointer arrays with vmalloc For awhile now, many of the GEM code paths have allocated page or object arrays with the slab allocator. This is nice and fast, but won't work well if memory is fragmented, since the slab allocator works with physically contiguous memory (i.e. order > 2 allocations are likely to fail fairly early after booting and doing some work). This patch works around the issue by falling back to vmalloc for >PAGE_SIZE allocations. This is ugly, but much less work than chaining a bunch of pages together by hand (suprisingly there's not a bunch of generic kernel helpers for this yet afaik). vmalloc space is somewhat precious on 32 bit kernels, but our allocations shouldn't be big enough to cause problems, though they're routinely more than a page. Note that this patch doesn't address the unchecked alloc-based-on-ioctl-args in GEM; that needs to be fixed in a separate patch. Also, I've deliberately ignored the DRM's "area" junk. I don't think anyone actually uses it anymore and I'm hoping it gets ripped out soon. [Updated: removed size arg to new free function. We could unify the free functions as well once the DRM mem tracking is ripped out.] fd.o bug #20152 (part 1/3) Signed-off-by: Jesse Barnes Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_gem.c | 38 +++++++++++++++----------------------- 1 file changed, 15 insertions(+), 23 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index b189b49c7602..4a24c90fb940 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -349,7 +349,7 @@ i915_gem_shmem_pread_slow(struct drm_device *dev, struct drm_gem_object *obj, last_data_page = (data_ptr + args->size - 1) / PAGE_SIZE; num_pages = last_data_page - first_data_page + 1; - user_pages = kcalloc(num_pages, sizeof(struct page *), GFP_KERNEL); + user_pages = drm_calloc_large(num_pages, sizeof(struct page *)); if (user_pages == NULL) return -ENOMEM; @@ -429,7 +429,7 @@ fail_put_user_pages: SetPageDirty(user_pages[i]); page_cache_release(user_pages[i]); } - kfree(user_pages); + drm_free_large(user_pages); return ret; } @@ -649,7 +649,7 @@ i915_gem_gtt_pwrite_slow(struct drm_device *dev, struct drm_gem_object *obj, last_data_page = (data_ptr + args->size - 1) / PAGE_SIZE; num_pages = last_data_page - first_data_page + 1; - user_pages = kcalloc(num_pages, sizeof(struct page *), GFP_KERNEL); + user_pages = drm_calloc_large(num_pages, sizeof(struct page *)); if (user_pages == NULL) return -ENOMEM; @@ -719,7 +719,7 @@ out_unlock: out_unpin_pages: for (i = 0; i < pinned_pages; i++) page_cache_release(user_pages[i]); - kfree(user_pages); + drm_free_large(user_pages); return ret; } @@ -824,7 +824,7 @@ i915_gem_shmem_pwrite_slow(struct drm_device *dev, struct drm_gem_object *obj, last_data_page = (data_ptr + args->size - 1) / PAGE_SIZE; num_pages = last_data_page - first_data_page + 1; - user_pages = kcalloc(num_pages, sizeof(struct page *), GFP_KERNEL); + user_pages = drm_calloc_large(num_pages, sizeof(struct page *)); if (user_pages == NULL) return -ENOMEM; @@ -902,7 +902,7 @@ fail_unlock: fail_put_user_pages: for (i = 0; i < pinned_pages; i++) page_cache_release(user_pages[i]); - kfree(user_pages); + drm_free_large(user_pages); return ret; } @@ -1408,9 +1408,7 @@ i915_gem_object_put_pages(struct drm_gem_object *obj) } obj_priv->dirty = 0; - drm_free(obj_priv->pages, - page_count * sizeof(struct page *), - DRM_MEM_DRIVER); + drm_free_large(obj_priv->pages); obj_priv->pages = NULL; } @@ -2024,8 +2022,7 @@ i915_gem_object_get_pages(struct drm_gem_object *obj) */ page_count = obj->size / PAGE_SIZE; BUG_ON(obj_priv->pages != NULL); - obj_priv->pages = drm_calloc(page_count, sizeof(struct page *), - DRM_MEM_DRIVER); + obj_priv->pages = drm_calloc_large(page_count, sizeof(struct page *)); if (obj_priv->pages == NULL) { DRM_ERROR("Faled to allocate page list\n"); obj_priv->pages_refcount--; @@ -3111,7 +3108,7 @@ i915_gem_get_relocs_from_user(struct drm_i915_gem_exec_object *exec_list, reloc_count += exec_list[i].relocation_count; } - *relocs = drm_calloc(reloc_count, sizeof(**relocs), DRM_MEM_DRIVER); + *relocs = drm_calloc_large(reloc_count, sizeof(**relocs)); if (*relocs == NULL) return -ENOMEM; @@ -3125,8 +3122,7 @@ i915_gem_get_relocs_from_user(struct drm_i915_gem_exec_object *exec_list, exec_list[i].relocation_count * sizeof(**relocs)); if (ret != 0) { - drm_free(*relocs, reloc_count * sizeof(**relocs), - DRM_MEM_DRIVER); + drm_free_large(*relocs); *relocs = NULL; return -EFAULT; } @@ -3165,7 +3161,7 @@ i915_gem_put_relocs_to_user(struct drm_i915_gem_exec_object *exec_list, } err: - drm_free(relocs, reloc_count * sizeof(*relocs), DRM_MEM_DRIVER); + drm_free_large(relocs); return ret; } @@ -3198,10 +3194,8 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, return -EINVAL; } /* Copy in the exec list from userland */ - exec_list = drm_calloc(sizeof(*exec_list), args->buffer_count, - DRM_MEM_DRIVER); - object_list = drm_calloc(sizeof(*object_list), args->buffer_count, - DRM_MEM_DRIVER); + exec_list = drm_calloc_large(sizeof(*exec_list), args->buffer_count); + object_list = drm_calloc_large(sizeof(*object_list), args->buffer_count); if (exec_list == NULL || object_list == NULL) { DRM_ERROR("Failed to allocate exec or object list " "for %d buffers\n", @@ -3462,10 +3456,8 @@ err: } pre_mutex_err: - drm_free(object_list, sizeof(*object_list) * args->buffer_count, - DRM_MEM_DRIVER); - drm_free(exec_list, sizeof(*exec_list) * args->buffer_count, - DRM_MEM_DRIVER); + drm_free_large(object_list); + drm_free_large(exec_list); drm_free(cliprects, sizeof(*cliprects) * args->num_cliprects, DRM_MEM_DRIVER); -- cgit v1.2.3 From 26a9a418237c0b06528941bca693c49c8d97edbe Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 19 May 2009 11:25:35 -0700 Subject: Avoid ICE in get_random_int() with gcc-3.4.5 Martin Knoblauch reports that trying to build 2.6.30-rc6-git3 with RHEL4.3 userspace (gcc (GCC) 3.4.5 20051201 (Red Hat 3.4.5-2)) causes an internal compiler error (ICE): drivers/char/random.c: In function `get_random_int': drivers/char/random.c:1672: error: unrecognizable insn: (insn 202 148 150 0 /scratch/build/linux-2.6.30-rc6-git3/arch/x86/include/asm/tsc.h:23 (set (reg:SI 0 ax [91]) (subreg:SI (plus:DI (plus:DI (reg:DI 0 ax [88]) (subreg:DI (reg:SI 6 bp) 0)) (const_int -4 [0xfffffffffffffffc])) 0)) -1 (nil) (nil)) drivers/char/random.c:1672: internal compiler error: in extract_insn, at recog.c:2083 and after some debugging it turns out that it's due to the code trying to figure out the rough value of the current stack pointer by taking an address of an uninitialized variable and casting that to an integer. This is clearly a compiler bug, but it's not worth fighting - while the current stack kernel pointer might be somewhat hard to predict in user space, it's also not generally going to change for a lot of the call chains for a particular process. So just drop it, and mumble some incoherent curses at the compiler. Tested-by: Martin Knoblauch Cc: Matt Mackall Cc: Ingo Molnar Signed-off-by: Linus Torvalds --- drivers/char/random.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/random.c b/drivers/char/random.c index b2ced39d76b2..8c7444857a4b 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -1673,7 +1673,7 @@ unsigned int get_random_int(void) int ret; keyptr = get_keyptr(); - hash[0] += current->pid + jiffies + get_cycles() + (int)(long)&ret; + hash[0] += current->pid + jiffies + get_cycles(); ret = half_md4_transform(hash, keyptr->secret); put_cpu_var(get_random_int_hash); -- cgit v1.2.3 From b126d113484886d900179b4ae55ea7fabe15f936 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 30 Apr 2009 14:48:36 +0100 Subject: mfd: Keep a cache of WM8350 volatile values Due to the way that the WM8350 audio driver handles CODEC_ENA many of the WM8350 audio registers are marked as volatile when they aren't actually so. Allow the audio driver to see a cache of these values for inspection during interrupt context. To do this we need to stop satisfying any bits from volatile registers from cache - there's no real benefit from doing so anyway, we did the read already. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm8350-core.c | 8 -------- 1 file changed, 8 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c index c2be3088e2e1..fe24079387c5 100644 --- a/drivers/mfd/wm8350-core.c +++ b/drivers/mfd/wm8350-core.c @@ -79,10 +79,6 @@ static int wm8350_phys_read(struct wm8350 *wm8350, u8 reg, int num_regs, /* Cache is CPU endian */ dest[i - reg] = be16_to_cpu(dest[i - reg]); - /* Satisfy non-volatile bits from cache */ - dest[i - reg] &= wm8350_reg_io_map[i].vol; - dest[i - reg] |= wm8350->reg_cache[i]; - /* Mask out non-readable bits */ dest[i - reg] &= wm8350_reg_io_map[i].readable; } @@ -182,9 +178,6 @@ static int wm8350_write(struct wm8350 *wm8350, u8 reg, int num_regs, u16 *src) (wm8350->reg_cache[i] & ~wm8350_reg_io_map[i].writable) | src[i - reg]; - /* Don't store volatile bits */ - wm8350->reg_cache[i] &= ~wm8350_reg_io_map[i].vol; - src[i - reg] = cpu_to_be16(src[i - reg]); } @@ -1261,7 +1254,6 @@ static int wm8350_create_cache(struct wm8350 *wm8350, int type, int mode) (i < WM8350_CLOCK_CONTROL_1 || i > WM8350_AIF_TEST)) { value = be16_to_cpu(wm8350->reg_cache[i]); value &= wm8350_reg_io_map[i].readable; - value &= ~wm8350_reg_io_map[i].vol; wm8350->reg_cache[i] = value; } else wm8350->reg_cache[i] = reg_map[i]; -- cgit v1.2.3 From f43ab901005c2bb3c5440e91b6efae9f5db02e7c Mon Sep 17 00:00:00 2001 From: Nelson Castillo Date: Tue, 12 May 2009 13:26:47 -0700 Subject: mfd: pcf50633: fix unsafe disable_irq() Without this change Openmoko Freerunner (GTA02) bootstrap will deadlock. As pointed out in other patches this issue is in the wild since the merge of: : commit 3aa551c9b4c40018f0e261a178e3d25478dc04a9 : Author: Thomas Gleixner : Date: Mon Mar 23 18:28:15 2009 +0100 : : genirq: add threaded interrupt handler support : : Add support for threaded interrupt handlers Signed-off-by: Nelson Castillo Cc: Ingo Molnar Cc: Cc: Thomas Gleixner Signed-off-by: Andrew Morton Signed-off-by: Samuel Ortiz --- drivers/mfd/pcf50633-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c index 7793932a513b..11a6248cc1c1 100644 --- a/drivers/mfd/pcf50633-core.c +++ b/drivers/mfd/pcf50633-core.c @@ -443,7 +443,7 @@ static irqreturn_t pcf50633_irq(int irq, void *data) dev_dbg(pcf->dev, "pcf50633_irq\n"); get_device(pcf->dev); - disable_irq(pcf->irq); + disable_irq_nosync(pcf->irq); schedule_work(&pcf->irq_work); return IRQ_HANDLED; -- cgit v1.2.3 From b3bad72e494fb2ff0c81be4ca2ddb94adf6a47c2 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 17 May 2009 20:17:06 +0200 Subject: PCI PM: Fix initialization and kexec breakage for some devices Recent PCI PM changes introduced a bug that causes some devices to be mishandled after kexec and during early initialization. The failure scenario in the kexec case is the following: * Assume a PCI device is not power-manageable by the platform and has PCI_PM_CTRL_NO_SOFT_RESET set in PMCSR. * The device is put into D3 before kexec (using the native PCI PM). * After kexec, pci_setup_device() sets the device's power state to PCI_UNKNOWN. * pci_set_power_state(dev, PCI_D0) is called by the device's driver. * __pci_start_power_transition(dev, PCI_D0) is called and since the device is not power-manageable by the platform, it causes pci_update_current_state(dev, PCI_D0) to be called. As a result the device's current_state field is updated to PCI_D3, in accordance with the contents of its PCI PM registers. * pci_raw_set_power_state() is called and it changes the device power state to D0. *However*, it should also call pci_restore_bars() to reinitialize the device, but it doesn't, because the device's current_state field has been modified earlier. To prevent this from happening, modify pci_platform_power_transition() so that it doesn't use pci_update_current_state() to update the current_state field for devices that aren't power-manageable by the platform. Instead, this field should be updated directly for devices that don't support the native PCI PM. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/pci/pci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 34bf0fdf5047..1a91bf9687af 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -557,7 +557,8 @@ static int pci_platform_power_transition(struct pci_dev *dev, pci_power_t state) } else { error = -ENODEV; /* Fall back to PCI_D0 if native PM is not supported */ - pci_update_current_state(dev, PCI_D0); + if (!dev->pm_cap) + dev->current_state = PCI_D0; } return error; -- cgit v1.2.3 From fbaa58696cef848de818768783ef185bd3f05158 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Wed, 13 May 2009 12:50:40 -0400 Subject: TPM: get_event_name stack corruption get_event_name uses sprintf to fill a buffer declared on the stack. It fills the buffer 2 bytes at a time. What the code doesn't take into account is that sprintf(buf, "%02x", data) actually writes 3 bytes. 2 bytes for the data and then it nul terminates the string. Since we declare buf to be 40 characters long and then we write 40 bytes of data into buf sprintf is going to write 41 characters. The fix is to leave room in buf for the nul terminator. Signed-off-by: Eric Paris Signed-off-by: James Morris --- drivers/char/tpm/tpm_bios.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/tpm/tpm_bios.c b/drivers/char/tpm/tpm_bios.c index ed306eb1057f..0c2f55a38b95 100644 --- a/drivers/char/tpm/tpm_bios.c +++ b/drivers/char/tpm/tpm_bios.c @@ -212,7 +212,8 @@ static int get_event_name(char *dest, struct tcpa_event *event, unsigned char * event_entry) { const char *name = ""; - char data[40] = ""; + /* 41 so there is room for 40 data and 1 nul */ + char data[41] = ""; int i, n_len = 0, d_len = 0; struct tcpa_pc_event *pc_event; -- cgit v1.2.3 From b674137755bbe2750f997a2a1264db3cdf8abcb3 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 18 May 2009 11:56:16 +1000 Subject: drm: Round size of SHM maps to PAGE_SIZE Currently, userspace can fail to obtain the SAREA mapping (among other reasons) if it passes SAREA_MAX to drmAddMap without aligning it to the page size. This breaks for example on PowerPC with 64K pages and radeon despite the kernel radeon actually doing the right rouding in the first place. The way SAREA_MAX is defined with a bunch of ifdef's and duplicated between libdrm and the X server is gross, ultimately it should be retrieved by userspace from the kernel, but in the meantime, we have plenty of existing userspace built with bad values that need to work. This patch works around broken userspace by rounding the requested size in drm_addmap_core() of any SHM map to the page size. Since the backing memory for SHM maps is also allocated within addmap_core, there is no danger of adjacent memory being exposed due to the increased map size. The only side effect is that drivers that previously tried to create or access SHM maps using a size < PAGE_SIZE and failed (getting -EINVAL), will now succeed at the cost of a little bit more memory used if that happens to be when the map is created. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Jesse Barnes --- drivers/gpu/drm/drm_bufs.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_bufs.c b/drivers/gpu/drm/drm_bufs.c index 6d80d17f1e96..0411d912d82a 100644 --- a/drivers/gpu/drm/drm_bufs.c +++ b/drivers/gpu/drm/drm_bufs.c @@ -170,6 +170,14 @@ static int drm_addmap_core(struct drm_device * dev, resource_size_t offset, } DRM_DEBUG("offset = 0x%08llx, size = 0x%08lx, type = %d\n", (unsigned long long)map->offset, map->size, map->type); + + /* page-align _DRM_SHM maps. They are allocated here so there is no security + * hole created by that and it works around various broken drivers that use + * a non-aligned quantity to map the SAREA. --BenH + */ + if (map->type == _DRM_SHM) + map->size = PAGE_ALIGN(map->size); + if ((map->offset & (~(resource_size_t)PAGE_MASK)) || (map->size & (~PAGE_MASK))) { drm_free(map, sizeof(*map), DRM_MEM_MAPS); return -EINVAL; -- cgit v1.2.3 From d3375ea7213d09284ee3683d8bc075b9d3786a03 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 20 May 2009 08:42:06 +0200 Subject: cdrom: beyond ARRAY_SIZE of viocd_diskinfo Do not go beyond ARRAY_SIZE of viocd_diskinfo Signed-off-by: Roel Kluin Signed-off-by: Jens Axboe --- drivers/cdrom/viocd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c index 13929356135c..9b1624e0ddeb 100644 --- a/drivers/cdrom/viocd.c +++ b/drivers/cdrom/viocd.c @@ -587,7 +587,7 @@ static int viocd_probe(struct vio_dev *vdev, const struct vio_device_id *id) struct device_node *node = vdev->dev.archdata.of_node; deviceno = vdev->unit_address; - if (deviceno > VIOCD_MAX_CD) + if (deviceno >= VIOCD_MAX_CD) return -ENODEV; if (!node) return -ENODEV; -- cgit v1.2.3 From 2b611cb6eed04062d0a9861c82248e02c844ba3f Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Fri, 27 Mar 2009 17:47:27 -0400 Subject: ath5k: fix scanning in AR2424 AR5K_PHY_PLL_40MHZ_5413 should not be ORed with AR5K_PHY_MODE_RAD_RF5112 for 5 GHz channels. The incorrect PLL value breaks scanning in the countries where 5 GHz channels are allowed. Signed-off-by: Pavel Roskin Acked-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/reset.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath5k/reset.c b/drivers/net/wireless/ath5k/reset.c index 7a17d31b2fd9..faede828c8ff 100644 --- a/drivers/net/wireless/ath5k/reset.c +++ b/drivers/net/wireless/ath5k/reset.c @@ -359,7 +359,7 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial) mode |= AR5K_PHY_MODE_FREQ_5GHZ; if (ah->ah_radio == AR5K_RF5413) - clock |= AR5K_PHY_PLL_40MHZ_5413; + clock = AR5K_PHY_PLL_40MHZ_5413; else clock |= AR5K_PHY_PLL_40MHZ; -- cgit v1.2.3 From a54be5d43aa2d6febc5a4f8dd3b87b9429b60437 Mon Sep 17 00:00:00 2001 From: Forrest Zhang Date: Wed, 13 May 2009 11:14:39 -0400 Subject: ath5k: fix exp off-by-one when computing OFDM delta slope Commit e8f055f0c3b ("ath5k: Update reset code") subtly changed the code that computes floating point values for the PHY3_TIMING register such that the exponent is off by a decimal point, which can cause problems with OFDM channel operation. get_bitmask_order() actually returns the highest bit set plus one, whereas the previous code wanted the highest bit set. Instead, use ilog2 which is what this code is really calculating. Also check coef_scaled to handle the (invalid) case where we need log2(0). Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/reset.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath5k/reset.c b/drivers/net/wireless/ath5k/reset.c index faede828c8ff..5f72c111c2e8 100644 --- a/drivers/net/wireless/ath5k/reset.c +++ b/drivers/net/wireless/ath5k/reset.c @@ -26,7 +26,7 @@ \*****************************/ #include /* To determine if a card is pci-e */ -#include /* For get_bitmask_order */ +#include #include "ath5k.h" #include "reg.h" #include "base.h" @@ -69,10 +69,10 @@ static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah, /* Get exponent * ALGO: coef_exp = 14 - highest set bit position */ - coef_exp = get_bitmask_order(coef_scaled); + coef_exp = ilog2(coef_scaled); /* Doesn't make sense if it's zero*/ - if (!coef_exp) + if (!coef_scaled || !coef_exp) return -EINVAL; /* Note: we've shifted coef_scaled by 24 */ -- cgit v1.2.3 From fbc9f97bbf5e1eaee562eba93dc60faaff3f3bfa Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Fri, 15 May 2009 16:13:46 -0700 Subject: iwlwifi: do not cancel delayed work inside spin_lock_irqsave Calling cancel_delayed_work() from inside spin_lock_irqsave, introduces a potential deadlock. As explained by Johannes Berg A - lock T - timer phase CPU 1 CPU 2 --------------------------------------------- some place that calls cancel_timer_sync() (which is the | code) lock-irq(A) | "lock-irq"(T) | "unlock"(T) | wait(T) unlock(A) timer softirq "lock"(T) run(T) "unlock"(T) irq handler lock(A) unlock(A) Now all that again, interleaved, leading to deadlock: lock-irq(A) "lock"(T) run(T) IRQ during or maybe before run(T) --> lock(A) "lock-irq"(T) wait(T) We fix this by moving the call to cancel_delayed_work() into workqueue. There are cases where the work may not actually be queued or running at the time we are trying to cancel it, but cancel_delayed_work() is able to deal with this. Also cleanup iwl_set_mode related to this call. This function (iwl_set_mode) is only called when bringing interface up and there will thus not be any scanning done. No need to try to cancel scanning. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=13224, which was also reported at http://marc.info/?l=linux-wireless&m=124081921903223&w=2 . Tested-by: Miles Lane Signed-off-by: Reinette Chatre Acked-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn.c | 7 ------- drivers/net/wireless/iwlwifi/iwl-scan.c | 7 ++++--- drivers/net/wireless/iwlwifi/iwl3945-base.c | 9 ++------- 3 files changed, 6 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 3bb28db4a40f..f46ba2475776 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -669,13 +669,6 @@ static int iwl_set_mode(struct iwl_priv *priv, int mode) if (!iwl_is_ready_rf(priv)) return -EAGAIN; - cancel_delayed_work(&priv->scan_check); - if (iwl_scan_cancel_timeout(priv, 100)) { - IWL_WARN(priv, "Aborted scan still in progress after 100ms\n"); - IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n"); - return -EAGAIN; - } - iwl_commit_rxon(priv); return 0; diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c index e7c65c4f741b..6330b91e37ce 100644 --- a/drivers/net/wireless/iwlwifi/iwl-scan.c +++ b/drivers/net/wireless/iwlwifi/iwl-scan.c @@ -227,9 +227,6 @@ static void iwl_rx_scan_complete_notif(struct iwl_priv *priv, /* The HW is no longer scanning */ clear_bit(STATUS_SCAN_HW, &priv->status); - /* The scan completion notification came in, so kill that timer... */ - cancel_delayed_work(&priv->scan_check); - IWL_DEBUG_INFO(priv, "Scan pass on %sGHz took %dms\n", (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) ? "2.4" : "5.2", @@ -712,6 +709,8 @@ static void iwl_bg_request_scan(struct work_struct *data) mutex_lock(&priv->mutex); + cancel_delayed_work(&priv->scan_check); + if (!iwl_is_ready(priv)) { IWL_WARN(priv, "request scan called when driver not ready.\n"); goto done; @@ -925,6 +924,8 @@ void iwl_bg_scan_completed(struct work_struct *work) IWL_DEBUG_SCAN(priv, "SCAN complete scan\n"); + cancel_delayed_work(&priv->scan_check); + ieee80211_scan_completed(priv->hw, false); if (test_bit(STATUS_EXIT_PENDING, &priv->status)) diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 4cce66133500..ff4d0e41d7c4 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -782,13 +782,6 @@ static int iwl3945_set_mode(struct iwl_priv *priv, int mode) if (!iwl_is_ready_rf(priv)) return -EAGAIN; - cancel_delayed_work(&priv->scan_check); - if (iwl_scan_cancel_timeout(priv, 100)) { - IWL_WARN(priv, "Aborted scan still in progress after 100ms\n"); - IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n"); - return -EAGAIN; - } - iwl3945_commit_rxon(priv); return 0; @@ -3298,6 +3291,8 @@ static void iwl3945_bg_request_scan(struct work_struct *data) mutex_lock(&priv->mutex); + cancel_delayed_work(&priv->scan_check); + if (!iwl_is_ready(priv)) { IWL_WARN(priv, "request scan called when driver not ready.\n"); goto done; -- cgit v1.2.3 From 875690c378d64d9ee2de15cad8206d3f11ae5096 Mon Sep 17 00:00:00 2001 From: Fabio Rossi Date: Wed, 1 Apr 2009 20:37:50 +0200 Subject: ath5k: fix interpolation with equal power levels When the EEPROM contains weird values for the power levels we have to fix the interpolation process. Signed-off-by: Fabio Rossi Acked-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/phy.c | 49 +++++++++++++++++++++++----------------- 1 file changed, 28 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath5k/phy.c b/drivers/net/wireless/ath5k/phy.c index 9e2faae5ae94..b48b29dca3d2 100644 --- a/drivers/net/wireless/ath5k/phy.c +++ b/drivers/net/wireless/ath5k/phy.c @@ -1487,28 +1487,35 @@ ath5k_get_linear_pcdac_min(const u8 *stepL, const u8 *stepR, { s8 tmp; s16 min_pwrL, min_pwrR; - s16 pwr_i = pwrL[0]; - - do { - pwr_i--; - tmp = (s8) ath5k_get_interpolated_value(pwr_i, - pwrL[0], pwrL[1], - stepL[0], stepL[1]); - - } while (tmp > 1); - - min_pwrL = pwr_i; - - pwr_i = pwrR[0]; - do { - pwr_i--; - tmp = (s8) ath5k_get_interpolated_value(pwr_i, - pwrR[0], pwrR[1], - stepR[0], stepR[1]); - - } while (tmp > 1); + s16 pwr_i; + + if (pwrL[0] == pwrL[1]) + min_pwrL = pwrL[0]; + else { + pwr_i = pwrL[0]; + do { + pwr_i--; + tmp = (s8) ath5k_get_interpolated_value(pwr_i, + pwrL[0], pwrL[1], + stepL[0], stepL[1]); + } while (tmp > 1); + + min_pwrL = pwr_i; + } - min_pwrR = pwr_i; + if (pwrR[0] == pwrR[1]) + min_pwrR = pwrR[0]; + else { + pwr_i = pwrR[0]; + do { + pwr_i--; + tmp = (s8) ath5k_get_interpolated_value(pwr_i, + pwrR[0], pwrR[1], + stepR[0], stepR[1]); + } while (tmp > 1); + + min_pwrR = pwr_i; + } /* Keep the right boundary so that it works for both curves */ return max(min_pwrL, min_pwrR); -- cgit v1.2.3 From 267d493b322b05984048aef8ea9b5b213490bbe0 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Wed, 20 May 2009 10:51:41 -0400 Subject: airo: fix airo_get_encode{,ext} buffer overflow like I mean it... "airo: airo_get_encode{,ext} potential buffer overflow" was actually a no-op, due to an unrecognized type overflow in an assignment. Oddly, gcc only seems to tell me about it when using -Wextra...grrr... Signed-off-by: John W. Linville --- drivers/net/wireless/airo.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index d73475739127..9eabf4d1f2e7 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -6467,6 +6467,7 @@ static int airo_get_encode(struct net_device *dev, { struct airo_info *local = dev->ml_priv; int index = (dwrq->flags & IW_ENCODE_INDEX) - 1; + int wep_key_len; u8 buf[16]; if (!local->wep_capable) @@ -6500,11 +6501,13 @@ static int airo_get_encode(struct net_device *dev, dwrq->flags |= index + 1; /* Copy the key to the user buffer */ - dwrq->length = get_wep_key(local, index, &buf[0], sizeof(buf)); - if (dwrq->length != -1) - memcpy(extra, buf, dwrq->length); - else + wep_key_len = get_wep_key(local, index, &buf[0], sizeof(buf)); + if (wep_key_len < 0) { dwrq->length = 0; + } else { + dwrq->length = wep_key_len; + memcpy(extra, buf, dwrq->length); + } return 0; } @@ -6617,7 +6620,7 @@ static int airo_get_encodeext(struct net_device *dev, struct airo_info *local = dev->ml_priv; struct iw_point *encoding = &wrqu->encoding; struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; - int idx, max_key_len; + int idx, max_key_len, wep_key_len; u8 buf[16]; if (!local->wep_capable) @@ -6661,11 +6664,13 @@ static int airo_get_encodeext(struct net_device *dev, memset(extra, 0, 16); /* Copy the key to the user buffer */ - ext->key_len = get_wep_key(local, idx, &buf[0], sizeof(buf)); - if (ext->key_len != -1) - memcpy(extra, buf, ext->key_len); - else + wep_key_len = get_wep_key(local, idx, &buf[0], sizeof(buf)); + if (wep_key_len < 0) { ext->key_len = 0; + } else { + ext->key_len = wep_key_len; + memcpy(extra, buf, ext->key_len); + } return 0; } -- cgit v1.2.3 From c9d2fbf36df5e04efa226614093bb1bacc6fe131 Mon Sep 17 00:00:00 2001 From: Jay Sternberg Date: Tue, 19 May 2009 14:56:36 -0700 Subject: iwlwifi: update 5000 ucode support to version 2 of API enable iwl driver to support 5000 ucode having version 2 of API Signed-off-by: Jay Sternberg Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-5000.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index e5ca2511a81a..9452461ce864 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -46,7 +46,7 @@ #include "iwl-6000-hw.h" /* Highest firmware API version supported */ -#define IWL5000_UCODE_API_MAX 1 +#define IWL5000_UCODE_API_MAX 2 #define IWL5150_UCODE_API_MAX 2 /* Lowest firmware API version supported */ -- cgit v1.2.3 From a6c67339784db5763d6f20ae1881aeebe8c5a9f4 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 20 May 2009 02:12:56 +0200 Subject: wireless: beyond ARRAY_SIZE of intf->crypto_stats Do not go beyond ARRAY_SIZE of intf->crypto_stats Signed-off-by: Roel Kluin Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00debug.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c index 07d378ef0b46..7b3ee8c2eaef 100644 --- a/drivers/net/wireless/rt2x00/rt2x00debug.c +++ b/drivers/net/wireless/rt2x00/rt2x00debug.c @@ -138,7 +138,7 @@ void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev, if (cipher == CIPHER_TKIP_NO_MIC) cipher = CIPHER_TKIP; - if (cipher == CIPHER_NONE || cipher > CIPHER_MAX) + if (cipher == CIPHER_NONE || cipher >= CIPHER_MAX) return; /* Remove CIPHER_NONE index */ -- cgit v1.2.3 From 9b6fe313bfce27d4a261257da70196be0ac2bef5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michel=20D=C3=A4nzer?= Date: Wed, 20 May 2009 13:32:00 +0200 Subject: drm: Copy back ioctl data to userspace regardless of return code. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixes a regression from commit 9d5b3ffc42f7820e8ee07705496955e4c2c38dd9 ('drm: fixup some of the ioctl function exit paths'): The vblank ioctl needs to update the userspace parameters when interrupted by a signal, which was prevented by the return code check. This could cause the X server to hang in drmWaitVBlank(). Signed-off-by: Michel Dänzer Signed-off-by: Jesse Barnes --- drivers/gpu/drm/drm_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c index f01def16a669..019b7c578236 100644 --- a/drivers/gpu/drm/drm_drv.c +++ b/drivers/gpu/drm/drm_drv.c @@ -481,7 +481,7 @@ int drm_ioctl(struct inode *inode, struct file *filp, } retcode = func(dev, kdata, file_priv); - if ((retcode == 0) && (cmd & IOC_OUT)) { + if (cmd & IOC_OUT) { if (copy_to_user((void __user *)arg, kdata, _IOC_SIZE(cmd)) != 0) retcode = -EFAULT; -- cgit v1.2.3 From 03fbdb15c14e9746c63168e3ff2c64b9c8336d33 Mon Sep 17 00:00:00 2001 From: Alessandro Rubini Date: Wed, 20 May 2009 22:39:08 +0100 Subject: [ARM] 5519/1: amba probe: pass "struct amba_id *" instead of void * The second argument of the probe method points to the amba_id structure, so it's better passed with the correct type. None of the current in-tree drivers uses the pointer, so they have only been checked for a clean compile. Change suggested by Russell King. Signed-off-by: Alessandro Rubini Signed-off-by: Russell King --- drivers/input/serio/ambakmi.c | 2 +- drivers/mmc/host/mmci.c | 2 +- drivers/rtc/rtc-pl030.c | 2 +- drivers/rtc/rtc-pl031.c | 2 +- drivers/serial/amba-pl010.c | 2 +- drivers/serial/amba-pl011.c | 2 +- drivers/video/amba-clcd.c | 2 +- 7 files changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/input/serio/ambakmi.c b/drivers/input/serio/ambakmi.c index e29cdc13a199..a28c06d686e1 100644 --- a/drivers/input/serio/ambakmi.c +++ b/drivers/input/serio/ambakmi.c @@ -107,7 +107,7 @@ static void amba_kmi_close(struct serio *io) clk_disable(kmi->clk); } -static int amba_kmi_probe(struct amba_device *dev, void *id) +static int amba_kmi_probe(struct amba_device *dev, struct amba_id *id) { struct amba_kmi_port *kmi; struct serio *io; diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 36875dcfa492..7d4febdab286 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -490,7 +490,7 @@ static void mmci_check_status(unsigned long data) mod_timer(&host->timer, jiffies + HZ); } -static int __devinit mmci_probe(struct amba_device *dev, void *id) +static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) { struct mmc_platform_data *plat = dev->dev.platform_data; struct mmci_host *host; diff --git a/drivers/rtc/rtc-pl030.c b/drivers/rtc/rtc-pl030.c index 826153552157..aaf1f75fa293 100644 --- a/drivers/rtc/rtc-pl030.c +++ b/drivers/rtc/rtc-pl030.c @@ -102,7 +102,7 @@ static const struct rtc_class_ops pl030_ops = { .set_alarm = pl030_set_alarm, }; -static int pl030_probe(struct amba_device *dev, void *id) +static int pl030_probe(struct amba_device *dev, struct amba_id *id) { struct pl030_rtc *rtc; int ret; diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c index 333eec689d2f..451fc13784d1 100644 --- a/drivers/rtc/rtc-pl031.c +++ b/drivers/rtc/rtc-pl031.c @@ -127,7 +127,7 @@ static int pl031_remove(struct amba_device *adev) return 0; } -static int pl031_probe(struct amba_device *adev, void *id) +static int pl031_probe(struct amba_device *adev, struct amba_id *id) { int ret; struct pl031_local *ldata; diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c index e3a5ad5ef1d6..cdc049d4350f 100644 --- a/drivers/serial/amba-pl010.c +++ b/drivers/serial/amba-pl010.c @@ -665,7 +665,7 @@ static struct uart_driver amba_reg = { .cons = AMBA_CONSOLE, }; -static int pl010_probe(struct amba_device *dev, void *id) +static int pl010_probe(struct amba_device *dev, struct amba_id *id) { struct uart_amba_port *uap; void __iomem *base; diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c index 8b2b9700f3e4..88fdac51b6c5 100644 --- a/drivers/serial/amba-pl011.c +++ b/drivers/serial/amba-pl011.c @@ -729,7 +729,7 @@ static struct uart_driver amba_reg = { .cons = AMBA_CONSOLE, }; -static int pl011_probe(struct amba_device *dev, void *id) +static int pl011_probe(struct amba_device *dev, struct amba_id *id) { struct uart_amba_port *uap; void __iomem *base; diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c index 61050ab14128..d1f80bac54f0 100644 --- a/drivers/video/amba-clcd.c +++ b/drivers/video/amba-clcd.c @@ -437,7 +437,7 @@ static int clcdfb_register(struct clcd_fb *fb) return ret; } -static int clcdfb_probe(struct amba_device *dev, void *id) +static int clcdfb_probe(struct amba_device *dev, struct amba_id *id) { struct clcd_board *board = dev->dev.platform_data; struct clcd_fb *fb; -- cgit v1.2.3 From c40499e04b2005e61f989824251f9343b55f96bb Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Thu, 21 May 2009 15:04:15 -0700 Subject: gigaset: beyond ARRAY_SIZE of iwb->data Signed-off-by: Roel Kluin Signed-off-by: David S. Miller --- drivers/isdn/gigaset/isocdata.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/isdn/gigaset/isocdata.c b/drivers/isdn/gigaset/isocdata.c index b171e75cb52e..29808c4fb1cb 100644 --- a/drivers/isdn/gigaset/isocdata.c +++ b/drivers/isdn/gigaset/isocdata.c @@ -175,7 +175,7 @@ int gigaset_isowbuf_getbytes(struct isowbuf_t *iwb, int size) return -EINVAL; } src = iwb->read; - if (unlikely(limit > BAS_OUTBUFSIZE + BAS_OUTBUFPAD || + if (unlikely(limit >= BAS_OUTBUFSIZE + BAS_OUTBUFPAD || (read < src && limit >= src))) { pr_err("isoc write buffer frame reservation violated\n"); return -EFAULT; -- cgit v1.2.3 From 8e9bb19ef97d6594e735bee64b6d72103e350854 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 20 May 2009 14:34:43 +0000 Subject: video: stop sh_mobile_lcdcfb only if started This patch fixes the LCDC driver to avoid calling the function sh_mobile_lcdc_start_stop(priv, 0) unless the same function has been called before to start the LCDC hardware. Triggered when sh_mobile_lcdcfb.c failed to probe() due to missing MSTP clocks. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/video/sh_mobile_lcdcfb.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c index 92ea0ab44ce2..f10d2fbeda06 100644 --- a/drivers/video/sh_mobile_lcdcfb.c +++ b/drivers/video/sh_mobile_lcdcfb.c @@ -47,6 +47,7 @@ struct sh_mobile_lcdc_priv { #endif unsigned long lddckr; struct sh_mobile_lcdc_chan ch[2]; + int started; }; /* shared registers */ @@ -451,6 +452,7 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv) /* start the lcdc */ sh_mobile_lcdc_start_stop(priv, 1); + priv->started = 1; /* tell the board code to enable the panel */ for (k = 0; k < ARRAY_SIZE(priv->ch); k++) { @@ -493,7 +495,10 @@ static void sh_mobile_lcdc_stop(struct sh_mobile_lcdc_priv *priv) } /* stop the lcdc */ - sh_mobile_lcdc_start_stop(priv, 0); + if (priv->started) { + sh_mobile_lcdc_start_stop(priv, 0); + priv->started = 0; + } /* stop clocks */ for (k = 0; k < ARRAY_SIZE(priv->ch); k++) -- cgit v1.2.3 From e069c0cf7c169ae5a8bfdc8d083a5d66fbef73d8 Mon Sep 17 00:00:00 2001 From: Inaky Perez-Gonzalez Date: Fri, 8 May 2009 15:51:44 -0700 Subject: wimax/i2400m: usb: fix device reset on autosuspend while not yet idle When the i2400m is connected to a network, the host interface (USB) cannot be suspended. For that to happen, the device has to have negotiated with the basestation to put the link on IDLE state. If the host tries to put the device in standby while it is connected but not idle, the device resets, as the driver should not do that. To avoid triggering that, when the USB susbsytem requires the driver to autosuspend the device, the driver checks if the device is not yet idle. If it is not, the request is rejected (will be retried again later on after the autosuspend timeout). At some point the device will enter idle and the request will succeed (unless of course, there is network traffic, but at that point, there is no idle neither in the link or the host interface). Signed-off-by: Inaky Perez-Gonzalez --- drivers/net/wimax/i2400m/usb.c | 35 ++++++++++++++++++++++++++++++----- 1 file changed, 30 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wimax/i2400m/usb.c b/drivers/net/wimax/i2400m/usb.c index ca4151a9e222..17851321b7fd 100644 --- a/drivers/net/wimax/i2400m/usb.c +++ b/drivers/net/wimax/i2400m/usb.c @@ -505,27 +505,52 @@ int i2400mu_suspend(struct usb_interface *iface, pm_message_t pm_msg) #ifdef CONFIG_PM struct usb_device *usb_dev = i2400mu->usb_dev; #endif + unsigned is_autosuspend = 0; struct i2400m *i2400m = &i2400mu->i2400m; +#ifdef CONFIG_PM + if (usb_dev->auto_pm > 0) + is_autosuspend = 1; +#endif + d_fnstart(3, dev, "(iface %p pm_msg %u)\n", iface, pm_msg.event); if (i2400m->updown == 0) goto no_firmware; - d_printf(1, dev, "fw up, requesting standby\n"); + if (i2400m->state == I2400M_SS_DATA_PATH_CONNECTED && is_autosuspend) { + /* ugh -- the device is connected and this suspend + * request is an autosuspend one (not a system standby + * / hibernate). + * + * The only way the device can go to standby is if the + * link with the base station is in IDLE mode; that + * were the case, we'd be in status + * I2400M_SS_CONNECTED_IDLE. But we are not. + * + * If we *tell* him to go power save now, it'll reset + * as a precautionary measure, so if this is an + * autosuspend thing, say no and it'll come back + * later, when the link is IDLE + */ + result = -EBADF; + d_printf(1, dev, "fw up, link up, not-idle, autosuspend: " + "not entering powersave\n"); + goto error_not_now; + } + d_printf(1, dev, "fw up: entering powersave\n"); atomic_dec(&i2400mu->do_autopm); result = i2400m_cmd_enter_powersave(i2400m); atomic_inc(&i2400mu->do_autopm); -#ifdef CONFIG_PM - if (result < 0 && usb_dev->auto_pm == 0) { + if (result < 0 && !is_autosuspend) { /* System suspend, can't fail */ dev_err(dev, "failed to suspend, will reset on resume\n"); result = 0; } -#endif if (result < 0) goto error_enter_powersave; i2400mu_notification_release(i2400mu); - d_printf(1, dev, "fw up, got standby\n"); + d_printf(1, dev, "powersave requested\n"); error_enter_powersave: +error_not_now: no_firmware: d_fnend(3, dev, "(iface %p pm_msg %u) = %d\n", iface, pm_msg.event, result); -- cgit v1.2.3 From f47edc6dab11801c2e97088ba7bbce042ded867c Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Fri, 22 May 2009 16:46:52 +0800 Subject: fsldma: fix check on potential fdev->chan[] overflow Fix the check of potential array overflow when using corrupted channel device tree nodes. Signed-off-by: Roel Kluin Signed-off-by: Li Yang --- drivers/dma/fsldma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index da8a8ed9e411..391b1bd7098b 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -830,7 +830,7 @@ static int __devinit fsl_dma_chan_probe(struct fsl_dma_device *fdev, new_fsl_chan->reg.end - new_fsl_chan->reg.start + 1); new_fsl_chan->id = ((new_fsl_chan->reg.start - 0x100) & 0xfff) >> 7; - if (new_fsl_chan->id > FSL_DMA_MAX_CHANS_PER_DEVICE) { + if (new_fsl_chan->id >= FSL_DMA_MAX_CHANS_PER_DEVICE) { dev_err(fdev->dev, "There is no %d channel!\n", new_fsl_chan->id); err = -EINVAL; -- cgit v1.2.3 From 138ef0185177a6d221d24b6aa8f12d867fbbef90 Mon Sep 17 00:00:00 2001 From: Ira Snyder Date: Tue, 19 May 2009 15:42:13 -0700 Subject: fsldma: fix "DMA halt timeout!" errors When using the DMA controller from multiple threads at the same time, it is possible to get lots of "DMA halt timeout!" errors printed to the kernel log. This occurs due to a race between fsl_dma_memcpy_issue_pending() and the interrupt handler, fsl_dma_chan_do_interrupt(). Both call the fsl_chan_xfer_ld_queue() function, which does not protect against concurrent accesses to dma_halt() and dma_start(). The existing spinlock is moved to cover the dma_halt() and dma_start() functions. Testing shows that the "DMA halt timeout!" errors disappear. Signed-off-by: Ira W. Snyder Signed-off-by: Li Yang --- drivers/dma/fsldma.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index 391b1bd7098b..a4151c3bb78b 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -598,15 +598,16 @@ static void fsl_chan_xfer_ld_queue(struct fsl_dma_chan *fsl_chan) dma_addr_t next_dest_addr; unsigned long flags; + spin_lock_irqsave(&fsl_chan->desc_lock, flags); + if (!dma_is_idle(fsl_chan)) - return; + goto out_unlock; dma_halt(fsl_chan); /* If there are some link descriptors * not transfered in queue. We need to start it. */ - spin_lock_irqsave(&fsl_chan->desc_lock, flags); /* Find the first un-transfer desciptor */ for (ld_node = fsl_chan->ld_queue.next; @@ -617,8 +618,6 @@ static void fsl_chan_xfer_ld_queue(struct fsl_dma_chan *fsl_chan) fsl_chan->common.cookie) == DMA_SUCCESS); ld_node = ld_node->next); - spin_unlock_irqrestore(&fsl_chan->desc_lock, flags); - if (ld_node != &fsl_chan->ld_queue) { /* Get the ld start address from ld_queue */ next_dest_addr = to_fsl_desc(ld_node)->async_tx.phys; @@ -630,6 +629,9 @@ static void fsl_chan_xfer_ld_queue(struct fsl_dma_chan *fsl_chan) set_cdar(fsl_chan, 0); set_ndar(fsl_chan, 0); } + +out_unlock: + spin_unlock_irqrestore(&fsl_chan->desc_lock, flags); } /** -- cgit v1.2.3 From bcfb7465c03a8c62c89da374677df56f6b894d44 Mon Sep 17 00:00:00 2001 From: Ira Snyder Date: Fri, 15 May 2009 14:27:16 -0700 Subject: fsldma: fix infinite loop on multi-descriptor DMA chain completion When creating a DMA transaction with multiple descriptors, the async_tx cookie is set to 0 for each descriptor in the chain, excluding the last descriptor, whose cookie is set to -EBUSY. When fsl_dma_tx_submit() is run, it only assigns a cookie to the first descriptor. All of the remaining descriptors keep their original value, including the last descriptor, which is set to -EBUSY. After the DMA completes, the driver will update the last completed cookie to be -EBUSY, which is an error code instead of a valid cookie. This causes dma_async_is_complete() to always return DMA_IN_PROGRESS. This causes the fsldma driver to never cleanup the queue of link descriptors, and the driver will re-run the DMA transaction on the hardware each time it receives the End-of-Chain interrupt. This causes an infinite loop. With this patch, fsl_dma_tx_submit() is changed to assign a cookie to every descriptor in the chain. The rest of the code then works without problems. Signed-off-by: Ira W. Snyder Signed-off-by: Li Yang --- drivers/dma/fsldma.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index a4151c3bb78b..7313a1ae5f83 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -313,8 +313,8 @@ static void fsl_chan_toggle_ext_start(struct fsl_dma_chan *fsl_chan, int enable) static dma_cookie_t fsl_dma_tx_submit(struct dma_async_tx_descriptor *tx) { - struct fsl_desc_sw *desc = tx_to_fsl_desc(tx); struct fsl_dma_chan *fsl_chan = to_fsl_chan(tx->chan); + struct fsl_desc_sw *desc; unsigned long flags; dma_cookie_t cookie; @@ -322,14 +322,17 @@ static dma_cookie_t fsl_dma_tx_submit(struct dma_async_tx_descriptor *tx) spin_lock_irqsave(&fsl_chan->desc_lock, flags); cookie = fsl_chan->common.cookie; - cookie++; - if (cookie < 0) - cookie = 1; - desc->async_tx.cookie = cookie; - fsl_chan->common.cookie = desc->async_tx.cookie; - - append_ld_queue(fsl_chan, desc); - list_splice_init(&desc->async_tx.tx_list, fsl_chan->ld_queue.prev); + list_for_each_entry(desc, &tx->tx_list, node) { + cookie++; + if (cookie < 0) + cookie = 1; + + desc->async_tx.cookie = cookie; + } + + fsl_chan->common.cookie = cookie; + append_ld_queue(fsl_chan, tx_to_fsl_desc(tx)); + list_splice_init(&tx->tx_list, fsl_chan->ld_queue.prev); spin_unlock_irqrestore(&fsl_chan->desc_lock, flags); -- cgit v1.2.3 From 776c8943f2766f2819fafd88fdfbaf418ecd6e41 Mon Sep 17 00:00:00 2001 From: Ira Snyder Date: Fri, 15 May 2009 11:33:20 -0700 Subject: fsldma: snooping is not enabled for last entry in descriptor chain On the 83xx controller, snooping is necessary for the DMA controller to ensure cache coherence with the CPU when transferring to/from RAM. The last descriptor in a chain will always have the End-of-Chain interrupt bit set, so we can set the snoop bit while adding the End-of-Chain interrupt bit. Signed-off-by: Ira W. Snyder Signed-off-by: Li Yang --- drivers/dma/fsldma.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index 7313a1ae5f83..ff9194d7ebb7 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -179,9 +179,14 @@ static void dma_halt(struct fsl_dma_chan *fsl_chan) static void set_ld_eol(struct fsl_dma_chan *fsl_chan, struct fsl_desc_sw *desc) { + u64 snoop_bits; + + snoop_bits = ((fsl_chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_83XX) + ? FSL_DMA_SNEN : 0; + desc->hw.next_ln_addr = CPU_TO_DMA(fsl_chan, - DMA_TO_CPU(fsl_chan, desc->hw.next_ln_addr, 64) | FSL_DMA_EOL, - 64); + DMA_TO_CPU(fsl_chan, desc->hw.next_ln_addr, 64) | FSL_DMA_EOL + | snoop_bits, 64); } static void append_ld_queue(struct fsl_dma_chan *fsl_chan, -- cgit v1.2.3 From 2e077f8e8337e52eef3c39c24c31e103b11a0326 Mon Sep 17 00:00:00 2001 From: Ira Snyder Date: Fri, 15 May 2009 09:59:46 -0700 Subject: fsldma: fix memory leak on error path in fsl_dma_prep_memcpy() When preparing a memcpy operation, if the kernel fails to allocate memory for a link descriptor after the first link descriptor has already been allocated, then some memory will never be released. Fix the problem by walking the list of allocated descriptors backwards, and freeing the allocated descriptors back into the DMA pool. Signed-off-by: Ira W. Snyder Signed-off-by: Li Yang --- drivers/dma/fsldma.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index ff9194d7ebb7..15783102bf17 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -462,8 +462,8 @@ static struct dma_async_tx_descriptor *fsl_dma_prep_memcpy( { struct fsl_dma_chan *fsl_chan; struct fsl_desc_sw *first = NULL, *prev = NULL, *new; + struct list_head *list; size_t copy; - LIST_HEAD(link_chain); if (!chan) return NULL; @@ -480,7 +480,7 @@ static struct dma_async_tx_descriptor *fsl_dma_prep_memcpy( if (!new) { dev_err(fsl_chan->dev, "No free memory for link descriptor\n"); - return NULL; + goto fail; } #ifdef FSL_DMA_LD_DEBUG dev_dbg(fsl_chan->dev, "new link desc alloc %p\n", new); @@ -515,7 +515,19 @@ static struct dma_async_tx_descriptor *fsl_dma_prep_memcpy( /* Set End-of-link to the last link descriptor of new list*/ set_ld_eol(fsl_chan, new); - return first ? &first->async_tx : NULL; + return &first->async_tx; + +fail: + if (!first) + return NULL; + + list = &first->async_tx.tx_list; + list_for_each_entry_safe_reverse(new, prev, list, node) { + list_del(&new->node); + dma_pool_free(fsl_chan->desc_pool, new, new->async_tx.phys); + } + + return NULL; } /** -- cgit v1.2.3 From 8369d5fa63260cc54464b4687aa6a0f78402d98e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 22 May 2009 16:23:36 +0200 Subject: ide: fix 40-wire cable detection for TSST SH-S202* ATAPI devices (v2) Since 2.6.26 we support UDMA66 on ATAPI devices requiring IVB quirk: commit 8588a2b732928b343233af9b1855705b8286bed4 ("ide: add SH-S202J to ivb_list[]") We also later added support for more such devices in: commit e97564f362a93f8c248246c19828895950341252 ("ide: More TSST drives with broken cable detection") and in: commit 3ced5c49bd2d1f2c7f769e3a54385883de63a652 ("ide: add TSSTcorp CDDVDW SH-S202H to ivb_list[]") It turns out that such devices lack cable detection altogether (which in turn results in incorrect detection of 40-wire cables by our current cable detection strategy) so always handle them by trusting host-side cable detection only. v2: Model detection fixup from Martin. Reported-and-tested-by: Martin Lottermoser Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-iops.c | 21 +++++++++++++++++---- 1 file changed, 17 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index c19a221b1e18..06fe002116ec 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -206,8 +206,6 @@ EXPORT_SYMBOL_GPL(ide_in_drive_list); /* * Early UDMA66 devices don't set bit14 to 1, only bit13 is valid. - * We list them here and depend on the device side cable detection for them. - * * Some optical devices with the buggy firmwares have the same problem. */ static const struct drive_list_entry ivb_list[] = { @@ -251,10 +249,25 @@ u8 eighty_ninty_three(ide_drive_t *drive) * - force bit13 (80c cable present) check also for !ivb devices * (unless the slave device is pre-ATA3) */ - if ((id[ATA_ID_HW_CONFIG] & 0x4000) || - (ivb && (id[ATA_ID_HW_CONFIG] & 0x2000))) + if (id[ATA_ID_HW_CONFIG] & 0x4000) return 1; + if (ivb) { + const char *model = (char *)&id[ATA_ID_PROD]; + + if (strstr(model, "TSSTcorp CDDVDW SH-S202")) { + /* + * These ATAPI devices always report 80c cable + * so we have to depend on the host in this case. + */ + if (hwif->cbl == ATA_CBL_PATA80) + return 1; + } else { + /* Depend on the device side cable detection. */ + if (id[ATA_ID_HW_CONFIG] & 0x2000) + return 1; + } + } no_80w: if (drive->dev_flags & IDE_DFLAG_UDMA33_WARNED) return 0; -- cgit v1.2.3 From e3b29f05124b07303088795396ff858811d2acb8 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 22 May 2009 16:23:37 +0200 Subject: ide: fix OOPS during ide-cd error recovery On Tuesday 19 May 2009 20:29:28 Martin Lottermoser wrote: > hdc: cdrom_decode_status: error=0x40 <3>{ LastFailedSense=0x04 } > ide: failed opcode was: unknown > hdc: DMA disabled > ------------[ cut here ]------------ > kernel BUG at drivers/ide/ide-io.c:872! It is possible for ide-cd to ignore ide_error()'s return value under some circumstances. Workaround it in ide_intr() and ide_timer_expiry() by checking if there is a device/port reset pending currently. Fixes bug #13345: http://bugzilla.kernel.org/show_bug.cgi?id=13345 Reported-by: Martin Lottermoser Reported-and-tested-by: Modestas Vainius Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-io.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 35dc38d3b2c5..6415a2e2ba87 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -696,7 +696,7 @@ void ide_timer_expiry (unsigned long data) } spin_lock_irq(&hwif->lock); enable_irq(hwif->irq); - if (startstop == ide_stopped) { + if (startstop == ide_stopped && hwif->polling == 0) { ide_unlock_port(hwif); plug_device = 1; } @@ -868,7 +868,7 @@ irqreturn_t ide_intr (int irq, void *dev_id) * same irq as is currently being serviced here, and Linux * won't allow another of the same (on any CPU) until we return. */ - if (startstop == ide_stopped) { + if (startstop == ide_stopped && hwif->polling == 0) { BUG_ON(hwif->handler); ide_unlock_port(hwif); plug_device = 1; -- cgit v1.2.3 From 26bfcf21e25fa090f099fa0ccf201424989cbd7b Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 22 May 2009 16:23:37 +0200 Subject: ide: fix printk() levels in ide_dump_ata[pi]_error() Fixes "<3>" in error messages like this one: hdc: cdrom_decode_status: error=0x40 <3>{ LastFailedSense=0x04 } Reported-by: Martin Lottermoser Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-lib.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 56ff8c46c7d1..85b9bae111f6 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -91,7 +91,7 @@ static void ide_dump_sector(ide_drive_t *drive) static void ide_dump_ata_error(ide_drive_t *drive, u8 err) { - printk(KERN_ERR "{ "); + printk(KERN_CONT "{ "); if (err & ATA_ABORTED) printk(KERN_CONT "DriveStatusError "); if (err & ATA_ICRC) @@ -121,7 +121,7 @@ static void ide_dump_ata_error(ide_drive_t *drive, u8 err) static void ide_dump_atapi_error(ide_drive_t *drive, u8 err) { - printk(KERN_ERR "{ "); + printk(KERN_CONT "{ "); if (err & ATAPI_ILI) printk(KERN_CONT "IllegalLengthIndication "); if (err & ATAPI_EOM) -- cgit v1.2.3 From cc30137a221372c67a943ad9ea68121a2bd57a6e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 22 May 2009 16:23:38 +0200 Subject: ide: improve failed opcode reporting Nowadays we (almost) always store the currently executing command in hwif->cmd so we can use it for the failed opcode reporting. Cc: Martin Lottermoser Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-lib.c | 23 ++++------------------- 1 file changed, 4 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 85b9bae111f6..2148df836ce7 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -31,24 +31,6 @@ void ide_toggle_bounce(ide_drive_t *drive, int on) blk_queue_bounce_limit(drive->queue, addr); } -static void ide_dump_opcode(ide_drive_t *drive) -{ - struct request *rq = drive->hwif->rq; - struct ide_cmd *cmd = NULL; - - if (!rq) - return; - - if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) - cmd = rq->special; - - printk(KERN_ERR "ide: failed opcode was: "); - if (cmd == NULL) - printk(KERN_CONT "unknown\n"); - else - printk(KERN_CONT "0x%02x\n", cmd->tf.command); -} - u64 ide_get_lba_addr(struct ide_cmd *cmd, int lba48) { struct ide_taskfile *tf = &cmd->tf; @@ -179,7 +161,10 @@ u8 ide_dump_status(ide_drive_t *drive, const char *msg, u8 stat) else ide_dump_atapi_error(drive, err); } - ide_dump_opcode(drive); + + printk(KERN_ERR "%s: possibly failed opcode: 0x%02x\n", + drive->name, drive->hwif->cmd.tf.command); + return err; } EXPORT_SYMBOL(ide_dump_status); -- cgit v1.2.3 From 28ee9bc5cc42776e0364399b401a64906ac1ac8e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 22 May 2009 16:23:38 +0200 Subject: ide: report timeouts in ide_busy_sleep() * change 'hwif' argument to 'drive' * report an error on timeout Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 7f264ed1141b..c895ed52b2e8 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -295,7 +295,7 @@ int ide_dev_read_id(ide_drive_t *drive, u8 cmd, u16 *id) timeout = ((cmd == ATA_CMD_ID_ATA) ? WAIT_WORSTCASE : WAIT_PIDENTIFY) / 2; - if (ide_busy_sleep(hwif, timeout, use_altstatus)) + if (ide_busy_sleep(drive, timeout, use_altstatus)) return 1; /* wait for IRQ and ATA_DRQ */ @@ -316,8 +316,9 @@ int ide_dev_read_id(ide_drive_t *drive, u8 cmd, u16 *id) return rc; } -int ide_busy_sleep(ide_hwif_t *hwif, unsigned long timeout, int altstatus) +int ide_busy_sleep(ide_drive_t *drive, unsigned long timeout, int altstatus) { + ide_hwif_t *hwif = drive->hwif; u8 stat; timeout += jiffies; @@ -330,6 +331,8 @@ int ide_busy_sleep(ide_hwif_t *hwif, unsigned long timeout, int altstatus) return 0; } while (time_before(jiffies, timeout)); + printk(KERN_ERR "%s: timeout in %s\n", drive->name, __func__); + return 1; /* drive timed-out */ } @@ -420,7 +423,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd) tp_ops->dev_select(drive); msleep(50); tp_ops->exec_command(hwif, ATA_CMD_DEV_RESET); - (void)ide_busy_sleep(hwif, WAIT_WORSTCASE, 0); + (void)ide_busy_sleep(drive, WAIT_WORSTCASE, 0); rc = ide_dev_read_id(drive, cmd, id); } -- cgit v1.2.3 From 5993856e53fbc4b4f28e2d481deaebeb715b1267 Mon Sep 17 00:00:00 2001 From: Harald Welte Date: Fri, 22 May 2009 16:23:39 +0200 Subject: via82cxxx: Add VIA VX855 PCI Device ID This patch adds the PCI Device ID 0xc409 to the PCI ID table of via82cxxx.c, as well as the 0x8409 south bridge ID. This is required to make the IDE driver work on the VX855/VX875 integrated chipset. Signed-off-by: Harald Welte Cc: Joseph Chan Cc: Bruce Chang Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/via82cxxx.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c index 3ff7231e4858..028de26a25fe 100644 --- a/drivers/ide/via82cxxx.c +++ b/drivers/ide/via82cxxx.c @@ -67,6 +67,7 @@ static struct via_isa_bridge { u8 udma_mask; u8 flags; } via_isa_bridges[] = { + { "vx855", PCI_DEVICE_ID_VIA_VX855, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, @@ -474,6 +475,7 @@ static const struct pci_device_id via_pci_tbl[] = { { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C576_1), 0 }, { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C586_1), 0 }, { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_CX700_IDE), 0 }, + { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_VX855_IDE), 0 }, { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_6410), 1 }, { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_SATA_EIDE), 1 }, { 0, }, -- cgit v1.2.3 From 9a2845c453d170e4e9b1437fa671dbf39b0e7bd8 Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Wed, 20 May 2009 13:36:17 -0500 Subject: ipmi: fix ipmi_si modprobe hang Instead of queuing IPMB messages before channel initialization, just throw them away. Nobody will be listening for them at this point, anyway, and they will clog up the queue and nothing will be delivered if we queue them. Also set the current channel to the number of channels, as this value is used to tell if the channel information has been initialized. Signed-off-by: Corey Minyard Cc: Ferenc Wagner Cc: Dan Frazier Signed-off-by: Linus Torvalds --- drivers/char/ipmi/ipmi_msghandler.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c index aa83a0865ec1..09050797c76a 100644 --- a/drivers/char/ipmi/ipmi_msghandler.c +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -2856,6 +2856,7 @@ int ipmi_register_smi(struct ipmi_smi_handlers *handlers, /* Assume a single IPMB channel at zero. */ intf->channels[0].medium = IPMI_CHANNEL_MEDIUM_IPMB; intf->channels[0].protocol = IPMI_CHANNEL_PROTOCOL_IPMB; + intf->curr_channel = IPMI_MAX_CHANNELS; } if (rv == 0) @@ -3648,13 +3649,13 @@ static int handle_new_recv_msg(ipmi_smi_t intf, } /* - ** We need to make sure the channels have been initialized. - ** The channel_handler routine will set the "curr_channel" - ** equal to or greater than IPMI_MAX_CHANNELS when all the - ** channels for this interface have been initialized. - */ + * We need to make sure the channels have been initialized. + * The channel_handler routine will set the "curr_channel" + * equal to or greater than IPMI_MAX_CHANNELS when all the + * channels for this interface have been initialized. + */ if (intf->curr_channel < IPMI_MAX_CHANNELS) { - requeue = 1; /* Just put the message back for now */ + requeue = 0; /* Throw the message away */ goto out; } -- cgit v1.2.3 From 14b60391587ab9b2207c4fb6281763a93ae85e0f Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Wed, 20 May 2009 16:47:08 -0400 Subject: i915: support 8xx desktop cursors MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit For some reason we never added 8xx desktop cursor support to the kernel. This patch fixes that. [krh: Also set the size on pre-i915 hw.] Tested-by: Kristian Høgsberg Signed-off-by: Jesse Barnes Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_gem.c | 4 ++-- drivers/gpu/drm/i915/i915_reg.h | 17 +++++++++++++++++ drivers/gpu/drm/i915/intel_display.c | 26 ++++++++++++++++++++------ 3 files changed, 39 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 4a24c90fb940..717b6a854bcd 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1145,7 +1145,7 @@ int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf) mutex_unlock(&dev->struct_mutex); return VM_FAULT_SIGBUS; } - list_add(&obj_priv->list, &dev_priv->mm.inactive_list); + list_add_tail(&obj_priv->list, &dev_priv->mm.inactive_list); } /* Need a new fence register? */ @@ -1375,7 +1375,7 @@ i915_gem_mmap_gtt_ioctl(struct drm_device *dev, void *data, mutex_unlock(&dev->struct_mutex); return ret; } - list_add(&obj_priv->list, &dev_priv->mm.inactive_list); + list_add_tail(&obj_priv->list, &dev_priv->mm.inactive_list); } drm_gem_object_unreference(obj); diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 15da44cf21b1..9668cc0d7f4e 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1410,9 +1410,25 @@ /* Cursor A & B regs */ #define CURACNTR 0x70080 +/* Old style CUR*CNTR flags (desktop 8xx) */ +#define CURSOR_ENABLE 0x80000000 +#define CURSOR_GAMMA_ENABLE 0x40000000 +#define CURSOR_STRIDE_MASK 0x30000000 +#define CURSOR_FORMAT_SHIFT 24 +#define CURSOR_FORMAT_MASK (0x07 << CURSOR_FORMAT_SHIFT) +#define CURSOR_FORMAT_2C (0x00 << CURSOR_FORMAT_SHIFT) +#define CURSOR_FORMAT_3C (0x01 << CURSOR_FORMAT_SHIFT) +#define CURSOR_FORMAT_4C (0x02 << CURSOR_FORMAT_SHIFT) +#define CURSOR_FORMAT_ARGB (0x04 << CURSOR_FORMAT_SHIFT) +#define CURSOR_FORMAT_XRGB (0x05 << CURSOR_FORMAT_SHIFT) +/* New style CUR*CNTR flags */ +#define CURSOR_MODE 0x27 #define CURSOR_MODE_DISABLE 0x00 #define CURSOR_MODE_64_32B_AX 0x07 #define CURSOR_MODE_64_ARGB_AX ((1 << 5) | CURSOR_MODE_64_32B_AX) +#define MCURSOR_PIPE_SELECT (1 << 28) +#define MCURSOR_PIPE_A 0x00 +#define MCURSOR_PIPE_B (1 << 28) #define MCURSOR_GAMMA_ENABLE (1 << 26) #define CURABASE 0x70084 #define CURAPOS 0x70088 @@ -1420,6 +1436,7 @@ #define CURSOR_POS_SIGN 0x8000 #define CURSOR_X_SHIFT 0 #define CURSOR_Y_SHIFT 16 +#define CURSIZE 0x700a0 #define CURBCNTR 0x700c0 #define CURBBASE 0x700c4 #define CURBPOS 0x700c8 diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 3387cf32f385..c9d6f10ba92e 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1357,7 +1357,7 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc, int pipe = intel_crtc->pipe; uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR; uint32_t base = (pipe == 0) ? CURABASE : CURBBASE; - uint32_t temp; + uint32_t temp = I915_READ(control); size_t addr; int ret; @@ -1366,7 +1366,12 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc, /* if we want to turn off the cursor ignore width and height */ if (!handle) { DRM_DEBUG("cursor off\n"); - temp = CURSOR_MODE_DISABLE; + if (IS_MOBILE(dev) || IS_I9XX(dev)) { + temp &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE); + temp |= CURSOR_MODE_DISABLE; + } else { + temp &= ~(CURSOR_ENABLE | CURSOR_GAMMA_ENABLE); + } addr = 0; bo = NULL; mutex_lock(&dev->struct_mutex); @@ -1409,10 +1414,19 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc, addr = obj_priv->phys_obj->handle->busaddr; } - temp = 0; - /* set the pipe for the cursor */ - temp |= (pipe << 28); - temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE; + if (!IS_I9XX(dev)) + I915_WRITE(CURSIZE, (height << 12) | width); + + /* Hooray for CUR*CNTR differences */ + if (IS_MOBILE(dev) || IS_I9XX(dev)) { + temp &= ~(CURSOR_MODE | MCURSOR_PIPE_SELECT); + temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE; + temp |= (pipe << 28); /* Connect to correct pipe */ + } else { + temp &= ~(CURSOR_FORMAT_MASK); + temp |= CURSOR_ENABLE; + temp |= CURSOR_FORMAT_ARGB | CURSOR_GAMMA_ENABLE; + } finish: I915_WRITE(control, temp); -- cgit v1.2.3 From 8863170628da4b0b461eb96bf797df1dca0bd03e Mon Sep 17 00:00:00 2001 From: Ma Ling Date: Wed, 13 May 2009 11:19:55 +0800 Subject: drm/i915: Fetch SDVO LVDS mode lines from VBT, then reserve them Signed-off-by: Ma Ling Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_drv.h | 3 +- drivers/gpu/drm/i915/intel_bios.c | 102 +++++++++++++++++++++++++++----------- drivers/gpu/drm/i915/intel_bios.h | 17 +++++++ drivers/gpu/drm/i915/intel_lvds.c | 4 +- 4 files changed, 93 insertions(+), 33 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 9b149fe824c3..c431fa54bbb5 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -180,7 +180,8 @@ typedef struct drm_i915_private { int backlight_duty_cycle; /* restore backlight to this value */ bool panel_wants_dither; struct drm_display_mode *panel_fixed_mode; - struct drm_display_mode *vbt_mode; /* if any */ + struct drm_display_mode *lfp_lvds_vbt_mode; /* if any */ + struct drm_display_mode *sdvo_lvds_vbt_mode; /* if any */ /* Feature bits from the VBIOS */ unsigned int int_tv_support:1; diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index fc28e2bbd542..9d78cff33b24 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -57,9 +57,43 @@ find_section(struct bdb_header *bdb, int section_id) return NULL; } -/* Try to find panel data */ static void -parse_panel_data(struct drm_i915_private *dev_priv, struct bdb_header *bdb) +fill_detail_timing_data(struct drm_display_mode *panel_fixed_mode, + struct lvds_dvo_timing *dvo_timing) +{ + panel_fixed_mode->hdisplay = (dvo_timing->hactive_hi << 8) | + dvo_timing->hactive_lo; + panel_fixed_mode->hsync_start = panel_fixed_mode->hdisplay + + ((dvo_timing->hsync_off_hi << 8) | dvo_timing->hsync_off_lo); + panel_fixed_mode->hsync_end = panel_fixed_mode->hsync_start + + dvo_timing->hsync_pulse_width; + panel_fixed_mode->htotal = panel_fixed_mode->hdisplay + + ((dvo_timing->hblank_hi << 8) | dvo_timing->hblank_lo); + + panel_fixed_mode->vdisplay = (dvo_timing->vactive_hi << 8) | + dvo_timing->vactive_lo; + panel_fixed_mode->vsync_start = panel_fixed_mode->vdisplay + + dvo_timing->vsync_off; + panel_fixed_mode->vsync_end = panel_fixed_mode->vsync_start + + dvo_timing->vsync_pulse_width; + panel_fixed_mode->vtotal = panel_fixed_mode->vdisplay + + ((dvo_timing->vblank_hi << 8) | dvo_timing->vblank_lo); + panel_fixed_mode->clock = dvo_timing->clock * 10; + panel_fixed_mode->type = DRM_MODE_TYPE_PREFERRED; + + /* Some VBTs have bogus h/vtotal values */ + if (panel_fixed_mode->hsync_end > panel_fixed_mode->htotal) + panel_fixed_mode->htotal = panel_fixed_mode->hsync_end + 1; + if (panel_fixed_mode->vsync_end > panel_fixed_mode->vtotal) + panel_fixed_mode->vtotal = panel_fixed_mode->vsync_end + 1; + + drm_mode_set_name(panel_fixed_mode); +} + +/* Try to find integrated panel data */ +static void +parse_lfp_panel_data(struct drm_i915_private *dev_priv, + struct bdb_header *bdb) { struct bdb_lvds_options *lvds_options; struct bdb_lvds_lfp_data *lvds_lfp_data; @@ -91,38 +125,45 @@ parse_panel_data(struct drm_i915_private *dev_priv, struct bdb_header *bdb) panel_fixed_mode = drm_calloc(1, sizeof(*panel_fixed_mode), DRM_MEM_DRIVER); - panel_fixed_mode->hdisplay = (dvo_timing->hactive_hi << 8) | - dvo_timing->hactive_lo; - panel_fixed_mode->hsync_start = panel_fixed_mode->hdisplay + - ((dvo_timing->hsync_off_hi << 8) | dvo_timing->hsync_off_lo); - panel_fixed_mode->hsync_end = panel_fixed_mode->hsync_start + - dvo_timing->hsync_pulse_width; - panel_fixed_mode->htotal = panel_fixed_mode->hdisplay + - ((dvo_timing->hblank_hi << 8) | dvo_timing->hblank_lo); + fill_detail_timing_data(panel_fixed_mode, dvo_timing); - panel_fixed_mode->vdisplay = (dvo_timing->vactive_hi << 8) | - dvo_timing->vactive_lo; - panel_fixed_mode->vsync_start = panel_fixed_mode->vdisplay + - dvo_timing->vsync_off; - panel_fixed_mode->vsync_end = panel_fixed_mode->vsync_start + - dvo_timing->vsync_pulse_width; - panel_fixed_mode->vtotal = panel_fixed_mode->vdisplay + - ((dvo_timing->vblank_hi << 8) | dvo_timing->vblank_lo); - panel_fixed_mode->clock = dvo_timing->clock * 10; - panel_fixed_mode->type = DRM_MODE_TYPE_PREFERRED; + dev_priv->lfp_lvds_vbt_mode = panel_fixed_mode; - /* Some VBTs have bogus h/vtotal values */ - if (panel_fixed_mode->hsync_end > panel_fixed_mode->htotal) - panel_fixed_mode->htotal = panel_fixed_mode->hsync_end + 1; - if (panel_fixed_mode->vsync_end > panel_fixed_mode->vtotal) - panel_fixed_mode->vtotal = panel_fixed_mode->vsync_end + 1; + DRM_DEBUG("Found panel mode in BIOS VBT tables:\n"); + drm_mode_debug_printmodeline(panel_fixed_mode); - drm_mode_set_name(panel_fixed_mode); + return; +} + +/* Try to find sdvo panel data */ +static void +parse_sdvo_panel_data(struct drm_i915_private *dev_priv, + struct bdb_header *bdb) +{ + struct bdb_sdvo_lvds_options *sdvo_lvds_options; + struct lvds_dvo_timing *dvo_timing; + struct drm_display_mode *panel_fixed_mode; - dev_priv->vbt_mode = panel_fixed_mode; + dev_priv->sdvo_lvds_vbt_mode = NULL; - DRM_DEBUG("Found panel mode in BIOS VBT tables:\n"); - drm_mode_debug_printmodeline(panel_fixed_mode); + sdvo_lvds_options = find_section(bdb, BDB_SDVO_LVDS_OPTIONS); + if (!sdvo_lvds_options) + return; + + dvo_timing = find_section(bdb, BDB_SDVO_PANEL_DTDS); + if (!dvo_timing) + return; + + panel_fixed_mode = drm_calloc(1, sizeof(*panel_fixed_mode), + DRM_MEM_DRIVER); + + if (!panel_fixed_mode) + return; + + fill_detail_timing_data(panel_fixed_mode, + dvo_timing + sdvo_lvds_options->panel_type); + + dev_priv->sdvo_lvds_vbt_mode = panel_fixed_mode; return; } @@ -199,7 +240,8 @@ intel_init_bios(struct drm_device *dev) /* Grab useful general definitions */ parse_general_features(dev_priv, bdb); - parse_panel_data(dev_priv, bdb); + parse_lfp_panel_data(dev_priv, bdb); + parse_sdvo_panel_data(dev_priv, bdb); pci_unmap_rom(pdev, bios); diff --git a/drivers/gpu/drm/i915/intel_bios.h b/drivers/gpu/drm/i915/intel_bios.h index de621aad85b5..8ca2cde15804 100644 --- a/drivers/gpu/drm/i915/intel_bios.h +++ b/drivers/gpu/drm/i915/intel_bios.h @@ -279,6 +279,23 @@ struct vch_bdb_22 { struct vch_panel_data panels[16]; } __attribute__((packed)); +struct bdb_sdvo_lvds_options { + u8 panel_backlight; + u8 h40_set_panel_type; + u8 panel_type; + u8 ssc_clk_freq; + u16 als_low_trip; + u16 als_high_trip; + u8 sclalarcoeff_tab_row_num; + u8 sclalarcoeff_tab_row_size; + u8 coefficient[8]; + u8 panel_misc_bits_1; + u8 panel_misc_bits_2; + u8 panel_misc_bits_3; + u8 panel_misc_bits_4; +} __attribute__((packed)); + + bool intel_init_bios(struct drm_device *dev); /* diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 439a86514993..53731f0ffcb5 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -511,10 +511,10 @@ void intel_lvds_init(struct drm_device *dev) } /* Failed to get EDID, what about VBT? */ - if (dev_priv->vbt_mode) { + if (dev_priv->lfp_lvds_vbt_mode) { mutex_lock(&dev->mode_config.mutex); dev_priv->panel_fixed_mode = - drm_mode_duplicate(dev, dev_priv->vbt_mode); + drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode); mutex_unlock(&dev->mode_config.mutex); if (dev_priv->panel_fixed_mode) { dev_priv->panel_fixed_mode->type |= -- cgit v1.2.3 From 7086c87fb1446ceb37918ffa0941359a7c2ec6cf Mon Sep 17 00:00:00 2001 From: Ma Ling Date: Wed, 13 May 2009 11:20:06 +0800 Subject: drm/i915: Return SDVO LVDS VBT mode if no EDID modes are detected. Some new SDVO LVDS hardware doesn't have DDC available, and this should fix the display on it. Signed-off-by: Ma Ling Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_sdvo.c | 41 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 9913651c1e17..f79ebf4de63c 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -69,6 +69,10 @@ struct intel_sdvo_priv { * This is set if we treat the device as HDMI, instead of DVI. */ bool is_hdmi; + /** + * This is set if we detect output of sdvo device as LVDS. + */ + bool is_lvds; /** * Returned SDTV resolutions allowed for the current format, if the @@ -1543,6 +1547,37 @@ static void intel_sdvo_get_tv_modes(struct drm_connector *connector) } } +static void intel_sdvo_get_lvds_modes(struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; + struct drm_i915_private *dev_priv = connector->dev->dev_private; + + /* + * Attempt to get the mode list from DDC. + * Assume that the preferred modes are + * arranged in priority order. + */ + /* set the bus switch and get the modes */ + intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus); + intel_ddc_get_modes(intel_output); + if (list_empty(&connector->probed_modes) == false) + return; + + /* Fetch modes from VBT */ + if (dev_priv->sdvo_lvds_vbt_mode != NULL) { + struct drm_display_mode *newmode; + newmode = drm_mode_duplicate(connector->dev, + dev_priv->sdvo_lvds_vbt_mode); + if (newmode != NULL) { + /* Guarantee the mode is preferred */ + newmode->type = (DRM_MODE_TYPE_PREFERRED | + DRM_MODE_TYPE_DRIVER); + drm_mode_probed_add(connector, newmode); + } + } +} + static int intel_sdvo_get_modes(struct drm_connector *connector) { struct intel_output *output = to_intel_output(connector); @@ -1550,6 +1585,8 @@ static int intel_sdvo_get_modes(struct drm_connector *connector) if (sdvo_priv->is_tv) intel_sdvo_get_tv_modes(connector); + else if (sdvo_priv->is_lvds == true) + intel_sdvo_get_lvds_modes(connector); else intel_sdvo_get_ddc_modes(connector); @@ -1720,6 +1757,8 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) } } + /* In defaut case sdvo lvds is false */ + sdvo_priv->is_lvds = false; intel_sdvo_get_capabilities(intel_output, &sdvo_priv->caps); if (sdvo_priv->caps.output_flags & @@ -1773,6 +1812,7 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) connector->display_info.subpixel_order = SubPixelHorizontalRGB; encoder_type = DRM_MODE_ENCODER_LVDS; connector_type = DRM_MODE_CONNECTOR_LVDS; + sdvo_priv->is_lvds = true; } else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_LVDS1) { @@ -1780,6 +1820,7 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) connector->display_info.subpixel_order = SubPixelHorizontalRGB; encoder_type = DRM_MODE_ENCODER_LVDS; connector_type = DRM_MODE_CONNECTOR_LVDS; + sdvo_priv->is_lvds = true; } else { -- cgit v1.2.3 From ad5b2a6db3eddc41358d8a73f5cfe1c38e7e3a19 Mon Sep 17 00:00:00 2001 From: Jonas Bonn Date: Fri, 15 May 2009 09:10:41 +0200 Subject: drm/i915: Determine type before initialising connector drm_connector_init sets both the connector type and the connector type_id on the newly initialised connector. As the connector type_id is coupled to the connector type, the connector type cannot simply be modified on an initialised connector. This patch changes the order of operations on intel_sdvo_init so that the type is determined before the connector is intialised. This fixes a bug whereby the name card0-VGA-1 would be allocted to both a CRT and an SDVO connector since the SDVO connector would be initialised with type 'unknown' and hence have its type_id assigned from the wrong pool. Signed-off-by: Jonas Bonn Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_sdvo.c | 29 ++++++++++------------------- 1 file changed, 10 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index f79ebf4de63c..ded122c1ae2d 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -1713,17 +1713,9 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) return false; } - connector = &intel_output->base; - - drm_connector_init(dev, connector, &intel_sdvo_connector_funcs, - DRM_MODE_CONNECTOR_Unknown); - drm_connector_helper_add(connector, &intel_sdvo_connector_helper_funcs); sdvo_priv = (struct intel_sdvo_priv *)(intel_output + 1); intel_output->type = INTEL_OUTPUT_SDVO; - connector->interlace_allowed = 0; - connector->doublescan_allowed = 0; - /* setup the DDC bus. */ if (output_device == SDVOB) i2cbus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOB"); @@ -1731,7 +1723,7 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) i2cbus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOC"); if (!i2cbus) - goto err_connector; + goto err_inteloutput; sdvo_priv->i2c_bus = i2cbus; @@ -1747,7 +1739,6 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) intel_output->i2c_bus = i2cbus; intel_output->dev_priv = sdvo_priv; - /* Read the regs to test if we can talk to the device */ for (i = 0; i < 0x40; i++) { if (!intel_sdvo_read_byte(intel_output, i, &ch[i])) { @@ -1768,7 +1759,6 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) else sdvo_priv->controlled_output = SDVO_OUTPUT_TMDS1; - connector->display_info.subpixel_order = SubPixelHorizontalRGB; encoder_type = DRM_MODE_ENCODER_TMDS; connector_type = DRM_MODE_CONNECTOR_DVID; @@ -1786,7 +1776,6 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_SVID0) { sdvo_priv->controlled_output = SDVO_OUTPUT_SVID0; - connector->display_info.subpixel_order = SubPixelHorizontalRGB; encoder_type = DRM_MODE_ENCODER_TVDAC; connector_type = DRM_MODE_CONNECTOR_SVIDEO; sdvo_priv->is_tv = true; @@ -1795,21 +1784,18 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB0) { sdvo_priv->controlled_output = SDVO_OUTPUT_RGB0; - connector->display_info.subpixel_order = SubPixelHorizontalRGB; encoder_type = DRM_MODE_ENCODER_DAC; connector_type = DRM_MODE_CONNECTOR_VGA; } else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB1) { sdvo_priv->controlled_output = SDVO_OUTPUT_RGB1; - connector->display_info.subpixel_order = SubPixelHorizontalRGB; encoder_type = DRM_MODE_ENCODER_DAC; connector_type = DRM_MODE_CONNECTOR_VGA; } else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_LVDS0) { sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS0; - connector->display_info.subpixel_order = SubPixelHorizontalRGB; encoder_type = DRM_MODE_ENCODER_LVDS; connector_type = DRM_MODE_CONNECTOR_LVDS; sdvo_priv->is_lvds = true; @@ -1817,7 +1803,6 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_LVDS1) { sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS1; - connector->display_info.subpixel_order = SubPixelHorizontalRGB; encoder_type = DRM_MODE_ENCODER_LVDS; connector_type = DRM_MODE_CONNECTOR_LVDS; sdvo_priv->is_lvds = true; @@ -1836,9 +1821,16 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) goto err_i2c; } + connector = &intel_output->base; + drm_connector_init(dev, connector, &intel_sdvo_connector_funcs, + connector_type); + drm_connector_helper_add(connector, &intel_sdvo_connector_helper_funcs); + connector->interlace_allowed = 0; + connector->doublescan_allowed = 0; + connector->display_info.subpixel_order = SubPixelHorizontalRGB; + drm_encoder_init(dev, &intel_output->enc, &intel_sdvo_enc_funcs, encoder_type); drm_encoder_helper_add(&intel_output->enc, &intel_sdvo_helper_funcs); - connector->connector_type = connector_type; drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc); drm_sysfs_connector_add(connector); @@ -1876,8 +1868,7 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) err_i2c: intel_i2c_destroy(intel_output->i2c_bus); -err_connector: - drm_connector_cleanup(connector); +err_inteloutput: kfree(intel_output); return false; -- cgit v1.2.3 From 619ac3b75a1e9b2df66857f6a0fb466f1da5fa9e Mon Sep 17 00:00:00 2001 From: Ma Ling Date: Mon, 18 May 2009 16:12:46 +0800 Subject: drm/i915: Use an I2C algo to do the flip to SDVO DDC bus. Previously, we would set the control bus switch before calls were made to request EDID information over DDC. But recently the DDC code started doing multiple I2C transfers to get the EDID extensions as well. This tripped up SDVO, because the control bus switch is only in effect until the next STOP after a START. By doing our own algo, we can wrap each i2c transaction on the DDC I2C bus with the control bus switch it requires. freedesktop.org bug #21042 Signed-off-by: Ma Ling [anholt: Hand application for conflict, fixed error path] Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_sdvo.c | 67 ++++++++++++++++++++++++++++++++++++--- 1 file changed, 63 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index ded122c1ae2d..f3ef6bfd8ffc 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -1402,10 +1402,8 @@ static enum drm_connector_status intel_sdvo_detect(struct drm_connector *connect static void intel_sdvo_get_ddc_modes(struct drm_connector *connector) { struct intel_output *intel_output = to_intel_output(connector); - struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; /* set the bus switch and get the modes */ - intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus); intel_ddc_get_modes(intel_output); #if 0 @@ -1601,6 +1599,9 @@ static void intel_sdvo_destroy(struct drm_connector *connector) if (intel_output->i2c_bus) intel_i2c_destroy(intel_output->i2c_bus); + if (intel_output->ddc_bus) + intel_i2c_destroy(intel_output->ddc_bus); + drm_sysfs_connector_remove(connector); drm_connector_cleanup(connector); kfree(intel_output); @@ -1697,12 +1698,56 @@ intel_sdvo_get_digital_encoding_mode(struct intel_output *output) return true; } +static struct intel_output * +intel_sdvo_chan_to_intel_output(struct intel_i2c_chan *chan) +{ + struct drm_device *dev = chan->drm_dev; + struct drm_connector *connector; + struct intel_output *intel_output = NULL; + + list_for_each_entry(connector, + &dev->mode_config.connector_list, head) { + if (to_intel_output(connector)->ddc_bus == chan) { + intel_output = to_intel_output(connector); + break; + } + } + return intel_output; +} + +static int intel_sdvo_master_xfer(struct i2c_adapter *i2c_adap, + struct i2c_msg msgs[], int num) +{ + struct intel_output *intel_output; + struct intel_sdvo_priv *sdvo_priv; + struct i2c_algo_bit_data *algo_data; + struct i2c_algorithm *algo; + + algo_data = (struct i2c_algo_bit_data *)i2c_adap->algo_data; + intel_output = + intel_sdvo_chan_to_intel_output( + (struct intel_i2c_chan *)(algo_data->data)); + if (intel_output == NULL) + return -EINVAL; + + sdvo_priv = intel_output->dev_priv; + algo = (struct i2c_algorithm *)intel_output->i2c_bus->adapter.algo; + + intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus); + return algo->master_xfer(i2c_adap, msgs, num); +} + +static struct i2c_algorithm intel_sdvo_i2c_bit_algo = { + .master_xfer = intel_sdvo_master_xfer, +}; + bool intel_sdvo_init(struct drm_device *dev, int output_device) { struct drm_connector *connector; struct intel_output *intel_output; struct intel_sdvo_priv *sdvo_priv; struct intel_i2c_chan *i2cbus = NULL; + struct intel_i2c_chan *ddcbus = NULL; int connector_type; u8 ch[0x40]; int i; @@ -1748,6 +1793,20 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) } } + /* setup the DDC bus. */ + if (output_device == SDVOB) + ddcbus = intel_i2c_create(dev, GPIOE, "SDVOB DDC BUS"); + else + ddcbus = intel_i2c_create(dev, GPIOE, "SDVOC DDC BUS"); + + if (ddcbus == NULL) + goto err_i2c; + + intel_sdvo_i2c_bit_algo.functionality = + intel_output->i2c_bus->adapter.algo->functionality; + ddcbus->adapter.algo = &intel_sdvo_i2c_bit_algo; + intel_output->ddc_bus = ddcbus; + /* In defaut case sdvo lvds is false */ sdvo_priv->is_lvds = false; intel_sdvo_get_capabilities(intel_output, &sdvo_priv->caps); @@ -1862,11 +1921,11 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) sdvo_priv->caps.output_flags & (SDVO_OUTPUT_TMDS1 | SDVO_OUTPUT_RGB1) ? 'Y' : 'N'); - intel_output->ddc_bus = i2cbus; - return true; err_i2c: + if (ddcbus != NULL) + intel_i2c_destroy(intel_output->ddc_bus); intel_i2c_destroy(intel_output->i2c_bus); err_inteloutput: kfree(intel_output); -- cgit v1.2.3 From 95caa0a9bdaf93607bd0cc8932f53112496f2f22 Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Fri, 22 May 2009 21:30:39 -0300 Subject: icom: fix rmmod crash Actually the icom driver is crashing when is being removed because the driver is kfreeing the adapter structure before calling pci_release_regions(), which result in the following error: Unable to handle kernel paging request for data at address 0x6b6b6b6b6b6b6d33 Faulting instruction address: 0xc000000000246b80 Oops: Kernel access of bad area, sig: 11 [#1] .... [c000000012d436a0] [c0000000001002d0] .kfree+0x120/0x34c (unreliable) [c000000012d43730] [c000000000246d60] .pci_release_selected_regions+0x3c/0x68 [c000000012d437c0] [d000000002d54700] .icom_kref_release+0xf4/0x118 [icom] [c000000012d43850] [c000000000232e50] .kref_put+0x74/0x94 [c000000012d438d0] [d000000002d56c58] .icom_remove+0x40/0xa4 [icom] [c000000012d43960] [c000000000249e48] .pci_device_remove+0x50/0x90 [c000000012d439e0] [c0000000002d68d8] .__device_release_driver+0x94/0xd4 [c000000012d43a70] [c0000000002d7104] .driver_detach+0xf8/0x12c [c000000012d43b00] [c0000000002d549c] .bus_remove_driver+0xbc/0x11c [c000000012d43b90] [c0000000002d71dc] .driver_unregister+0x60/0x80 [c000000012d43c20] [c00000000024a07c] .pci_unregister_driver+0x44/0xe8 [c000000012d43cb0] [d000000002d56bf4] .icom_exit+0x1c/0x40 [icom] [c000000012d43d30] [c000000000095fa8] .SyS_delete_module+0x214/0x2a8 [c000000012d43e30] [c00000000000852c] syscall_exit+0x0/0x40 Signed-off-by: Breno Leitao Cc: stable@kernel.org Cc: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/icom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c index 6579e2be1dd1..a461b3b2c72d 100644 --- a/drivers/serial/icom.c +++ b/drivers/serial/icom.c @@ -1472,8 +1472,8 @@ static void icom_remove_adapter(struct icom_adapter *icom_adapter) free_irq(icom_adapter->pci_dev->irq, (void *) icom_adapter); iounmap(icom_adapter->base_addr); - icom_free_adapter(icom_adapter); pci_release_regions(icom_adapter->pci_dev); + icom_free_adapter(icom_adapter); } static void icom_kref_release(struct kref *kref) -- cgit v1.2.3 From df391e0eda1e678add56a8e34226edf05d89af6a Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Sat, 23 May 2009 09:51:20 -0700 Subject: Input: multitouch - add tracking ID to the protocol MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There are a few multi-touch devices that support finger tracking well in hardware, Stantum being the prime example. By exposing the tracking ID in the MT protocol, evdev bandwidth and cpu usage in user space can be reduced. This patch adds the ABS_MT_TRACKING_ID to the MT protocol. Signed-off-by: Henrik Rydberg Tested-by: Stéphane Chatty Signed-off-by: Dmitry Torokhov --- drivers/input/input.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/input/input.c b/drivers/input/input.c index e54e002665b0..5d445f48789b 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -42,6 +42,7 @@ static unsigned int input_abs_bypass_init_data[] __initdata = { ABS_MT_POSITION_Y, ABS_MT_TOOL_TYPE, ABS_MT_BLOB_ID, + ABS_MT_TRACKING_ID, 0 }; static unsigned long input_abs_bypass[BITS_TO_LONGS(ABS_CNT)]; -- cgit v1.2.3 From 32bdfac5462d777f35b00838893c4f87baf23efe Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 24 May 2009 21:15:07 +0200 Subject: PM: Do not hold dpm_list_mtx while disabling/enabling nonboot CPUs We shouldn't hold dpm_list_mtx while executing [disable|enable]_nonboot_cpus(), because theoretically this may lead to a deadlock as shown by the following example (provided by Johannes Berg): CPU 3 CPU 2 CPU 1 suspend/hibernate something: rtnl_lock() device_pm_lock() -> mutex_lock(&dpm_list_mtx) mutex_lock(&dpm_list_mtx) linkwatch_work -> rtnl_lock() disable_nonboot_cpus() -> flush CPU 3 workqueue Fortunately, device drivers are supposed to stop any activities that might lead to the registration of new device objects way before disable_nonboot_cpus() is called, so it shouldn't be necessary to hold dpm_list_mtx over the entire late part of device suspend and early part of device resume. Thus, during the late suspend and the early resume of devices acquire dpm_list_mtx only when dpm_list is going to be traversed and release it right after that. This patch is reported to fix the regressions tracked as http://bugzilla.kernel.org/show_bug.cgi?id=13245. Signed-off-by: Rafael J. Wysocki Acked-by: Alan Stern Reported-by: Miles Lane Tested-by: Ming Lei --- drivers/base/power/main.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index 69b4ddb7de3b..3e4bc699bc0f 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -357,6 +357,7 @@ static void dpm_power_up(pm_message_t state) { struct device *dev; + mutex_lock(&dpm_list_mtx); list_for_each_entry(dev, &dpm_list, power.entry) if (dev->power.status > DPM_OFF) { int error; @@ -366,6 +367,7 @@ static void dpm_power_up(pm_message_t state) if (error) pm_dev_err(dev, state, " early", error); } + mutex_unlock(&dpm_list_mtx); } /** @@ -614,6 +616,7 @@ int device_power_down(pm_message_t state) int error = 0; suspend_device_irqs(); + mutex_lock(&dpm_list_mtx); list_for_each_entry_reverse(dev, &dpm_list, power.entry) { error = suspend_device_noirq(dev, state); if (error) { @@ -622,6 +625,7 @@ int device_power_down(pm_message_t state) } dev->power.status = DPM_OFF_IRQ; } + mutex_unlock(&dpm_list_mtx); if (error) device_power_up(resume_event(state)); return error; -- cgit v1.2.3 From 4e2fd555199977c5994d1a4d2d3b8761b20ca4c7 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 25 May 2009 00:42:34 -0700 Subject: gianfar: fix BUG under load after introduction of skb recycling Since commit 0fd56bb5be6455d0d42241e65aed057244665e5e ("gianfar: Add support for skb recycling"), gianfar puts skbuffs that are in the rx ring back onto the recycle list as-is in case there was a receive error, but this breaks the following invariant: that all skbuffs on the recycle list have skb->data = skb->head + NET_SKB_PAD. The RXBUF_ALIGNMENT realignment done in gfar_new_skb() will be done twice on skbuffs recycled in this way, causing there not to be enough room in the skb anymore to receive a full packet, eventually leading to an skb_over_panic from gfar_clean_rx_ring() -> skb_put(). Resetting the skb->data pointer to skb->head + NET_SKB_PAD before putting the skb back onto the recycle list restores the mentioned invariant, and should fix this issue. Reported-by: Michael Guntsche Tested-by: Michael Guntsche Signed-off-by: Lennert Buytenhek Signed-off-by: David S. Miller --- drivers/net/gianfar.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index b2c49679bba7..a0519184e54e 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -1885,8 +1885,17 @@ int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit) if (unlikely(!newskb)) newskb = skb; - else if (skb) + else if (skb) { + /* + * We need to reset ->data to what it + * was before gfar_new_skb() re-aligned + * it to an RXBUF_ALIGNMENT boundary + * before we put the skb back on the + * recycle list. + */ + skb->data = skb->head + NET_SKB_PAD; __skb_queue_head(&priv->rx_recycle, skb); + } } else { /* Increment the number of packets */ dev->stats.rx_packets++; -- cgit v1.2.3 From 62e1e389f87a8839ad83b08c44691d1df8320846 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 26 May 2009 09:40:59 +1000 Subject: md: always update level / chunk_size / layout when writing v1.x metadata. We previously didn't update these fields when writing the metadata because they could never change. They can now, so we better write them. v0.90 metadata always updated these fields. Signed-off-by: NeilBrown --- drivers/md/md.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index fccc8343a250..aa79d55875f0 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -1375,6 +1375,9 @@ static void super_1_sync(mddev_t *mddev, mdk_rdev_t *rdev) sb->raid_disks = cpu_to_le32(mddev->raid_disks); sb->size = cpu_to_le64(mddev->dev_sectors); + sb->chunksize = cpu_to_le32(mddev->chunk_size >> 9); + sb->level = cpu_to_le32(mddev->level); + sb->layout = cpu_to_le32(mddev->layout); if (mddev->bitmap && mddev->bitmap_file == NULL) { sb->bitmap_offset = cpu_to_le32((__u32)mddev->bitmap_offset); -- cgit v1.2.3 From 2b69c83924396ad1eda36fdd267c9d2f360f5555 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 26 May 2009 09:41:17 +1000 Subject: md: improve errno return when setting array_size Instead of always returns EINVAL if anything goes wrong when setting the array size, add the option of E2BIG if the size requested is too large. This makes it easier for user-space to be sure what went wrong. Signed-off-by: NeilBrown --- drivers/md/md.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index aa79d55875f0..58e0b02a74c2 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3683,7 +3683,7 @@ array_size_store(mddev_t *mddev, const char *buf, size_t len) if (strict_blocks_to_sectors(buf, §ors) < 0) return -EINVAL; if (mddev->pers && mddev->pers->size(mddev, 0, 0) < sectors) - return -EINVAL; + return -E2BIG; mddev->external_size = 1; } -- cgit v1.2.3 From be512691036cc989c11d0f418187efbbf14468e6 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 26 May 2009 09:41:17 +1000 Subject: md: bitmap: improve bitmap maintenance code. The code for checking which bits in the bitmap can be cleared has 2 problems: 1/ it repeatedly takes and drops a spinlock, where it would make more sense to just hold on to it most of the time. 2/ it doesn't make use of some opportunities to skip large sections of the bitmap This patch fixes those. It will only affect CPU consumption, not correctness. Signed-off-by: NeilBrown --- drivers/md/bitmap.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index 47c68bc75a17..56df1cee8fb3 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -1097,14 +1097,12 @@ void bitmap_daemon_work(struct bitmap *bitmap) } bitmap->allclean = 1; + spin_lock_irqsave(&bitmap->lock, flags); for (j = 0; j < bitmap->chunks; j++) { bitmap_counter_t *bmc; - spin_lock_irqsave(&bitmap->lock, flags); - if (!bitmap->filemap) { + if (!bitmap->filemap) /* error or shutdown */ - spin_unlock_irqrestore(&bitmap->lock, flags); break; - } page = filemap_get_page(bitmap, j); @@ -1121,6 +1119,8 @@ void bitmap_daemon_work(struct bitmap *bitmap) write_page(bitmap, page, 0); bitmap->allclean = 0; } + spin_lock_irqsave(&bitmap->lock, flags); + j |= (PAGE_BITS - 1); continue; } @@ -1181,9 +1181,10 @@ void bitmap_daemon_work(struct bitmap *bitmap) ext2_clear_bit(file_page_offset(j), paddr); kunmap_atomic(paddr, KM_USER0); } - } - spin_unlock_irqrestore(&bitmap->lock, flags); + } else + j |= PAGE_COUNTER_MASK; } + spin_unlock_irqrestore(&bitmap->lock, flags); /* now sync the final page */ if (lastpage != NULL) { -- cgit v1.2.3 From b6a9ce688f613e2ee5f15e6720e0bb8520efc36e Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 26 May 2009 09:41:17 +1000 Subject: md: export 'frozen' resync state through sysfs The md resync engine has a 'frozen' state which ensures that no resync/recovery. This is used to avoid races. Export this state through the 'sync_action' sysfs attribute so that user-space can benefit and also avoid some races. Signed-off-by: NeilBrown --- drivers/md/md.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index 58e0b02a74c2..384e4f0904c8 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3306,7 +3306,9 @@ static ssize_t action_show(mddev_t *mddev, char *page) { char *type = "idle"; - if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) || + if (test_bit(MD_RECOVERY_FROZEN, &mddev->recovery)) + type = "frozen"; + else if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) || (!mddev->ro && test_bit(MD_RECOVERY_NEEDED, &mddev->recovery))) { if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery)) type = "reshape"; @@ -3329,7 +3331,12 @@ action_store(mddev_t *mddev, const char *page, size_t len) if (!mddev->pers || !mddev->pers->sync_request) return -EINVAL; - if (cmd_match(page, "idle")) { + if (cmd_match(page, "frozen")) + set_bit(MD_RECOVERY_FROZEN, &mddev->recovery); + else + clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery); + + if (cmd_match(page, "idle") || cmd_match(page, "frozen")) { if (mddev->sync_thread) { set_bit(MD_RECOVERY_INTR, &mddev->recovery); md_unregister_thread(mddev->sync_thread); -- cgit v1.2.3 From 848b3182365fdf5a05bcd5ed949071cac2c894b3 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 26 May 2009 12:41:08 +1000 Subject: md: raid5: avoid sector values going negative when testing reshape progress. As sector_t in unsigned, we cannot afford to let 'safepos' etc go negative. So replace a -= b; by a -= min(b,a); Signed-off-by: NeilBrown --- drivers/md/raid5.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 4616bc3a6e71..3c3626d2a1f9 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3811,13 +3811,13 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped safepos = conf->reshape_safe; sector_div(safepos, data_disks); if (mddev->delta_disks < 0) { - writepos -= reshape_sectors; + writepos -= min(reshape_sectors, writepos); readpos += reshape_sectors; safepos += reshape_sectors; } else { writepos += reshape_sectors; - readpos -= reshape_sectors; - safepos -= reshape_sectors; + readpos -= min(reshape_sectors, readpos); + safepos -= min(reshape_sectors, safepos); } /* 'writepos' is the most advanced device address we might write. -- cgit v1.2.3 From 7a91ee1f628ef6bfe3f13067c0ddf9db520cb86b Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 26 May 2009 12:57:21 +1000 Subject: md: don't update curr_resync_completed without also updating reshape_position. In order for the metadata to always be consistent, we mustn't updated curr_resync_completed without also updating reshape_position. The reshape code updates both at the same time. However since commit 97e4f42d62badb0f9fbc27c013e89bc1336a03bc the common md_do_sync will sometimes update curr_resync_completed but is not in a position to update reshape_position. So if MD_RECOVERY_RESHAPE is set (indicating that a reshape is happening, so reshape_position might change), don't update curr_resync_completed in md_do_sync, leave it to the per-personality reshape code. Signed-off-by: NeilBrown --- drivers/md/md.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index 384e4f0904c8..954456532acc 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -6362,12 +6362,13 @@ void md_do_sync(mddev_t *mddev) skipped = 0; - if ((mddev->curr_resync > mddev->curr_resync_completed && - (mddev->curr_resync - mddev->curr_resync_completed) - > (max_sectors >> 4)) || - (j - mddev->curr_resync_completed)*2 - >= mddev->resync_max - mddev->curr_resync_completed - ) { + if (!test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery) && + ((mddev->curr_resync > mddev->curr_resync_completed && + (mddev->curr_resync - mddev->curr_resync_completed) + > (max_sectors >> 4)) || + (j - mddev->curr_resync_completed)*2 + >= mddev->resync_max - mddev->curr_resync_completed + )) { /* time to update curr_resync_completed */ blk_unplug(mddev->queue); wait_event(mddev->recovery_wait, -- cgit v1.2.3 From b492b852cd8c99505708152c29a5e09a787af9de Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 26 May 2009 12:57:36 +1000 Subject: md: don't use locked_ioctl. md has no need for the BKL - it does its own locking. So md_ioctl doesn't need to be a locked_ioctl. Signed-off-by: NeilBrown --- drivers/md/md.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index 954456532acc..641b211fe3fe 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -5567,7 +5567,7 @@ static struct block_device_operations md_fops = .owner = THIS_MODULE, .open = md_open, .release = md_release, - .locked_ioctl = md_ioctl, + .ioctl = md_ioctl, .getgeo = md_getgeo, .media_changed = md_media_changed, .revalidate_disk= md_revalidate, -- cgit v1.2.3 From 217cbfa856dc1cbc2890781626c4032d9e3ec59f Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Mon, 25 May 2009 22:43:49 -0700 Subject: mac8390: fix regression caused during net_device_ops conversion Changeset ca17584bf2ad1b1e37a5c0e4386728cc5fc9dabc ("mac8390: update to net_device_ops") broke mac8390 by adding 8390.o to the link. That meant that lib8390.c was included twice, once in mac8390.c and once in 8390.c, subject to different macros. This patch reverts that by avoiding the wrappers in 8390.c. They seem to be of no value since COMPAT_NET_DEV_OPS is going away soon. Tested with a Kinetics EtherPort card. Signed-off-by: Finn Thain Signed-off-by: David S. Miller --- drivers/net/Makefile | 2 +- drivers/net/mac8390.c | 10 +++++----- 2 files changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 1fc4602a6ff2..a1c25cb4669f 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -102,7 +102,7 @@ obj-$(CONFIG_HAMACHI) += hamachi.o obj-$(CONFIG_NET) += Space.o loopback.o obj-$(CONFIG_SEEQ8005) += seeq8005.o obj-$(CONFIG_NET_SB1000) += sb1000.o -obj-$(CONFIG_MAC8390) += mac8390.o 8390.o +obj-$(CONFIG_MAC8390) += mac8390.o obj-$(CONFIG_APNE) += apne.o 8390.o obj-$(CONFIG_PCMCIA_PCNET) += 8390.o obj-$(CONFIG_HP100) += hp100.o diff --git a/drivers/net/mac8390.c b/drivers/net/mac8390.c index 8e884869a05b..f26667d5eaae 100644 --- a/drivers/net/mac8390.c +++ b/drivers/net/mac8390.c @@ -304,7 +304,7 @@ struct net_device * __init mac8390_probe(int unit) if (!MACH_IS_MAC) return ERR_PTR(-ENODEV); - dev = alloc_ei_netdev(); + dev = ____alloc_ei_netdev(0); if (!dev) return ERR_PTR(-ENOMEM); @@ -481,10 +481,10 @@ void cleanup_module(void) static const struct net_device_ops mac8390_netdev_ops = { .ndo_open = mac8390_open, .ndo_stop = mac8390_close, - .ndo_start_xmit = ei_start_xmit, - .ndo_tx_timeout = ei_tx_timeout, - .ndo_get_stats = ei_get_stats, - .ndo_set_multicast_list = ei_set_multicast_list, + .ndo_start_xmit = __ei_start_xmit, + .ndo_tx_timeout = __ei_tx_timeout, + .ndo_get_stats = __ei_get_stats, + .ndo_set_multicast_list = __ei_set_multicast_list, .ndo_validate_addr = eth_validate_addr, .ndo_set_mac_address = eth_mac_addr, .ndo_change_mtu = eth_change_mtu, -- cgit v1.2.3 From f11a377b3f4e897d11f0e8d1fc688667e2f19708 Mon Sep 17 00:00:00 2001 From: David Dillow Date: Fri, 22 May 2009 15:29:34 +0000 Subject: r8169: avoid losing MSI interrupts The 8169 chip only generates MSI interrupts when all enabled event sources are quiescent and one or more sources transition to active. If not all of the active events are acknowledged, or a new event becomes active while the existing ones are cleared in the handler, we will not see a new interrupt. The current interrupt handler masks off the Rx and Tx events once the NAPI handler has been scheduled, which opens a race window in which we can get another Rx or Tx event and never ACK'ing it, stopping all activity until the link is reset (ifconfig down/up). Fix this by always ACK'ing all event sources, and loop in the handler until we have all sources quiescent. Signed-off-by: David Dillow Tested-by: Michael Buesch Signed-off-by: David S. Miller --- drivers/net/r8169.c | 102 +++++++++++++++++++++++++++++----------------------- 1 file changed, 57 insertions(+), 45 deletions(-) (limited to 'drivers') diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 0b6e8c896835..8247a945a1d9 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -3554,54 +3554,64 @@ static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance) int handled = 0; int status; + /* loop handling interrupts until we have no new ones or + * we hit a invalid/hotplug case. + */ status = RTL_R16(IntrStatus); + while (status && status != 0xffff) { + handled = 1; - /* hotplug/major error/no more work/shared irq */ - if ((status == 0xffff) || !status) - goto out; - - handled = 1; + /* Handle all of the error cases first. These will reset + * the chip, so just exit the loop. + */ + if (unlikely(!netif_running(dev))) { + rtl8169_asic_down(ioaddr); + break; + } - if (unlikely(!netif_running(dev))) { - rtl8169_asic_down(ioaddr); - goto out; - } + /* Work around for rx fifo overflow */ + if (unlikely(status & RxFIFOOver) && + (tp->mac_version == RTL_GIGA_MAC_VER_11)) { + netif_stop_queue(dev); + rtl8169_tx_timeout(dev); + break; + } - status &= tp->intr_mask; - RTL_W16(IntrStatus, - (status & RxFIFOOver) ? (status | RxOverflow) : status); + if (unlikely(status & SYSErr)) { + rtl8169_pcierr_interrupt(dev); + break; + } - if (!(status & tp->intr_event)) - goto out; + if (status & LinkChg) + rtl8169_check_link_status(dev, tp, ioaddr); - /* Work around for rx fifo overflow */ - if (unlikely(status & RxFIFOOver) && - (tp->mac_version == RTL_GIGA_MAC_VER_11)) { - netif_stop_queue(dev); - rtl8169_tx_timeout(dev); - goto out; - } + /* We need to see the lastest version of tp->intr_mask to + * avoid ignoring an MSI interrupt and having to wait for + * another event which may never come. + */ + smp_rmb(); + if (status & tp->intr_mask & tp->napi_event) { + RTL_W16(IntrMask, tp->intr_event & ~tp->napi_event); + tp->intr_mask = ~tp->napi_event; + + if (likely(napi_schedule_prep(&tp->napi))) + __napi_schedule(&tp->napi); + else if (netif_msg_intr(tp)) { + printk(KERN_INFO "%s: interrupt %04x in poll\n", + dev->name, status); + } + } - if (unlikely(status & SYSErr)) { - rtl8169_pcierr_interrupt(dev); - goto out; + /* We only get a new MSI interrupt when all active irq + * sources on the chip have been acknowledged. So, ack + * everything we've seen and check if new sources have become + * active to avoid blocking all interrupts from the chip. + */ + RTL_W16(IntrStatus, + (status & RxFIFOOver) ? (status | RxOverflow) : status); + status = RTL_R16(IntrStatus); } - if (status & LinkChg) - rtl8169_check_link_status(dev, tp, ioaddr); - - if (status & tp->napi_event) { - RTL_W16(IntrMask, tp->intr_event & ~tp->napi_event); - tp->intr_mask = ~tp->napi_event; - - if (likely(napi_schedule_prep(&tp->napi))) - __napi_schedule(&tp->napi); - else if (netif_msg_intr(tp)) { - printk(KERN_INFO "%s: interrupt %04x in poll\n", - dev->name, status); - } - } -out: return IRQ_RETVAL(handled); } @@ -3617,13 +3627,15 @@ static int rtl8169_poll(struct napi_struct *napi, int budget) if (work_done < budget) { napi_complete(napi); - tp->intr_mask = 0xffff; - /* - * 20040426: the barrier is not strictly required but the - * behavior of the irq handler could be less predictable - * without it. Btw, the lack of flush for the posted pci - * write is safe - FR + + /* We need for force the visibility of tp->intr_mask + * for other CPUs, as we can loose an MSI interrupt + * and potentially wait for a retransmit timeout if we don't. + * The posted write to IntrMask is safe, as it will + * eventually make it to the chip and we won't loose anything + * until it does. */ + tp->intr_mask = 0xffff; smp_wmb(); RTL_W16(IntrMask, tp->intr_event); } -- cgit v1.2.3 From 42a06f2166f2f6f7bf04f32b4e823eacdceafdc9 Mon Sep 17 00:00:00 2001 From: Mathieu Desnoyers Date: Sun, 17 May 2009 10:23:52 -0400 Subject: [CPUFREQ] remove rwsem lock from CPUFREQ_GOV_STOP call * Rafael J. Wysocki (rjw@sisk.pl) wrote: > This message has been generated automatically as a part of a report > of regressions introduced between 2.6.28 and 2.6.29. > > The following bug entry is on the current list of known regressions > introduced between 2.6.28 and 2.6.29. Please verify if it still should > be listed and let me know (either way). > > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13186 > Subject : cpufreq timer teardown problem > Submitter : Mathieu Desnoyers > Date : 2009-04-23 14:00 (24 days old) > References : http://marc.info/?l=linux-kernel&m=124049523515036&w=4 > Handled-By : Mathieu Desnoyers > Patch : http://patchwork.kernel.org/patch/19754/ > http://patchwork.kernel.org/patch/19753/ The patches linked above depend on the following patch to remove circular locking dependency : cpufreq: remove rwsem lock from CPUFREQ_GOV_STOP call (the following issue was faced when using cancel_delayed_work_sync() in the timer teardown (which fixes a race). * KOSAKI Motohiro (kosaki.motohiro@jp.fujitsu.com) wrote: > Hi > > my box output following warnings. > it seems regression by commit 7ccc7608b836e58fbacf65ee4f8eefa288e86fac. > > A: work -> do_dbs_timer() -> cpu_policy_rwsem > B: store() -> cpu_policy_rwsem -> cpufreq_governor_dbs() -> work > > Hrm, I think it must be due to my attempt to fix the timer teardown race in ondemand governor mixed with new locking behavior in 2.6.30-rc. The rwlock seems to be taken around the whole call to cpufreq_governor_dbs(), when it should be only taken around accesses to the locked data, and especially *not* around the call to dbs_timer_exit(). Reverting my fix attempt would put the teardown race back in place (replacing the cancel_delayed_work_sync by cancel_delayed_work). Instead, a proper fix would imply modifying this critical section : cpufreq.c: __cpufreq_remove_dev() ... if (cpufreq_driver->target) __cpufreq_governor(data, CPUFREQ_GOV_STOP); unlock_policy_rwsem_write(cpu); To make sure the __cpufreq_governor() callback is not called with rwsem held. This would allow execution of cancel_delayed_work_sync() without being nested within the rwsem. Applies on top of the 2.6.30-rc5 tree. Required to remove circular dep in teardown of both conservative and ondemande governors so they can use cancel_delayed_work_sync(). CPUFREQ_GOV_STOP does not modify the policy, therefore this locking seemed unneeded. Signed-off-by: Mathieu Desnoyers CC: KOSAKI Motohiro Cc: Greg KH CC: Ingo Molnar CC: "Rafael J. Wysocki" CC: Ben Slusky CC: Chris Wright CC: Andrew Morton Signed-off-by: Dave Jones --- drivers/cpufreq/cpufreq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index d270e8eb3e67..47d2ad0ae079 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -1070,11 +1070,11 @@ static int __cpufreq_remove_dev(struct sys_device *sys_dev) spin_unlock_irqrestore(&cpufreq_driver_lock, flags); #endif + unlock_policy_rwsem_write(cpu); + if (cpufreq_driver->target) __cpufreq_governor(data, CPUFREQ_GOV_STOP); - unlock_policy_rwsem_write(cpu); - kobject_put(&data->kobj); /* we need to make sure that the underlying kobj is actually -- cgit v1.2.3 From b253d2b2d28ead6fed012feb54694b3d0562839a Mon Sep 17 00:00:00 2001 From: Mathieu Desnoyers Date: Sun, 17 May 2009 10:29:33 -0400 Subject: [CPUFREQ] fix timer teardown in conservative governor * Rafael J. Wysocki (rjw@sisk.pl) wrote: > This message has been generated automatically as a part of a report > of regressions introduced between 2.6.28 and 2.6.29. > > The following bug entry is on the current list of known regressions > introduced between 2.6.28 and 2.6.29. Please verify if it still should > be listed and let me know (either way). > > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13186 > Subject : cpufreq timer teardown problem > Submitter : Mathieu Desnoyers > Date : 2009-04-23 14:00 (24 days old) > References : http://marc.info/?l=linux-kernel&m=124049523515036&w=4 > Handled-By : Mathieu Desnoyers > Patch : http://patchwork.kernel.org/patch/19754/ > http://patchwork.kernel.org/patch/19753/ > (re-send with updated changelog) cpufreq fix timer teardown in conservative governor The problem is that dbs_timer_exit() uses cancel_delayed_work() when it should use cancel_delayed_work_sync(). cancel_delayed_work() does not wait for the workqueue handler to exit. The ondemand governor does not seem to be affected because the "if (!dbs_info->enable)" check at the beginning of the workqueue handler returns immediately without rescheduling the work. The conservative governor in 2.6.30-rc has the same check as the ondemand governor, which makes things usually run smoothly. However, if the governor is quickly stopped and then started, this could lead to the following race : dbs_enable could be reenabled and multiple do_dbs_timer handlers would run. This is why a synchronized teardown is required. Depends on patch cpufreq: remove rwsem lock from CPUFREQ_GOV_STOP call The following patch applies to 2.6.30-rc2. Stable kernels have a similar issue which should also be fixed, but the code changed between 2.6.29 and 2.6.30, so this patch only applies to 2.6.30-rc. Signed-off-by: Mathieu Desnoyers CC: Andrew Morton CC: gregkh@suse.de CC: stable@kernel.org CC: cpufreq@vger.kernel.org CC: Ingo Molnar CC: rjw@sisk.pl CC: Ben Slusky Signed-off-by: Dave Jones --- drivers/cpufreq/cpufreq_conservative.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c index 2ecd95e4ab1a..7a74d175287b 100644 --- a/drivers/cpufreq/cpufreq_conservative.c +++ b/drivers/cpufreq/cpufreq_conservative.c @@ -91,6 +91,9 @@ static unsigned int dbs_enable; /* number of CPUs using this policy */ * (like __cpufreq_driver_target()) is being called with dbs_mutex taken, then * cpu_hotplug lock should be taken before that. Note that cpu_hotplug lock * is recursive for the same process. -Venki + * DEADLOCK ALERT! (2) : do_dbs_timer() must not take the dbs_mutex, because it + * would deadlock with cancel_delayed_work_sync(), which is needed for proper + * raceless workqueue teardown. */ static DEFINE_MUTEX(dbs_mutex); @@ -542,7 +545,7 @@ static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info) static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info) { dbs_info->enable = 0; - cancel_delayed_work(&dbs_info->work); + cancel_delayed_work_sync(&dbs_info->work); } static int cpufreq_governor_dbs(struct cpufreq_policy *policy, -- cgit v1.2.3 From b14893a62c73af0eca414cfed505b8c09efc613c Mon Sep 17 00:00:00 2001 From: Mathieu Desnoyers Date: Sun, 17 May 2009 10:30:45 -0400 Subject: [CPUFREQ] fix timer teardown in ondemand governor * Rafael J. Wysocki (rjw@sisk.pl) wrote: > This message has been generated automatically as a part of a report > of regressions introduced between 2.6.28 and 2.6.29. > > The following bug entry is on the current list of known regressions > introduced between 2.6.28 and 2.6.29. Please verify if it still should > be listed and let me know (either way). > > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13186 > Subject : cpufreq timer teardown problem > Submitter : Mathieu Desnoyers > Date : 2009-04-23 14:00 (24 days old) > References : http://marc.info/?l=linux-kernel&m=124049523515036&w=4 > Handled-By : Mathieu Desnoyers > Patch : http://patchwork.kernel.org/patch/19754/ > http://patchwork.kernel.org/patch/19753/ > (updated changelog) cpufreq fix timer teardown in ondemand governor The problem is that dbs_timer_exit() uses cancel_delayed_work() when it should use cancel_delayed_work_sync(). cancel_delayed_work() does not wait for the workqueue handler to exit. The ondemand governor does not seem to be affected because the "if (!dbs_info->enable)" check at the beginning of the workqueue handler returns immediately without rescheduling the work. The conservative governor in 2.6.30-rc has the same check as the ondemand governor, which makes things usually run smoothly. However, if the governor is quickly stopped and then started, this could lead to the following race : dbs_enable could be reenabled and multiple do_dbs_timer handlers would run. This is why a synchronized teardown is required. The following patch applies to, at least, 2.6.28.x, 2.6.29.1, 2.6.30-rc2. Depends on patch cpufreq: remove rwsem lock from CPUFREQ_GOV_STOP call Signed-off-by: Mathieu Desnoyers CC: Andrew Morton CC: gregkh@suse.de CC: stable@kernel.org CC: cpufreq@vger.kernel.org CC: Ingo Molnar CC: rjw@sisk.pl CC: Ben Slusky Signed-off-by: Dave Jones --- drivers/cpufreq/cpufreq_ondemand.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c index 338f428a15b7..e741c339df76 100644 --- a/drivers/cpufreq/cpufreq_ondemand.c +++ b/drivers/cpufreq/cpufreq_ondemand.c @@ -98,6 +98,9 @@ static unsigned int dbs_enable; /* number of CPUs using this policy */ * (like __cpufreq_driver_target()) is being called with dbs_mutex taken, then * cpu_hotplug lock should be taken before that. Note that cpu_hotplug lock * is recursive for the same process. -Venki + * DEADLOCK ALERT! (2) : do_dbs_timer() must not take the dbs_mutex, because it + * would deadlock with cancel_delayed_work_sync(), which is needed for proper + * raceless workqueue teardown. */ static DEFINE_MUTEX(dbs_mutex); @@ -562,7 +565,7 @@ static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info) static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info) { dbs_info->enable = 0; - cancel_delayed_work(&dbs_info->work); + cancel_delayed_work_sync(&dbs_info->work); } static int cpufreq_governor_dbs(struct cpufreq_policy *policy, -- cgit v1.2.3 From e4a5d54f924ea5ce2913d9d0687d034004816465 Mon Sep 17 00:00:00 2001 From: Ma Ling Date: Tue, 26 May 2009 11:31:00 +0800 Subject: drm/i915: Add support for VGA load detection (pre-945). Two approaches for VGA detections: hot plug detection for 945G onwards and load pipe detection for Pre-945G. Load pipe detection will get one free pipe, set border color as red and blue, then check CRT status by swf register. This is a sync-up with the 2D driver. Signed-off-by: Ma Ling Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_crt.c | 149 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 147 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index 19148c3df637..640f5158effc 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -198,9 +198,142 @@ static bool intel_crt_detect_ddc(struct drm_connector *connector) return intel_ddc_probe(intel_output); } +static enum drm_connector_status +intel_crt_load_detect(struct drm_crtc *crtc, struct intel_output *intel_output) +{ + struct drm_encoder *encoder = &intel_output->enc; + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + uint32_t pipe = intel_crtc->pipe; + uint32_t save_bclrpat; + uint32_t save_vtotal; + uint32_t vtotal, vactive; + uint32_t vsample; + uint32_t vblank, vblank_start, vblank_end; + uint32_t dsl; + uint32_t bclrpat_reg; + uint32_t vtotal_reg; + uint32_t vblank_reg; + uint32_t vsync_reg; + uint32_t pipeconf_reg; + uint32_t pipe_dsl_reg; + uint8_t st00; + enum drm_connector_status status; + + if (pipe == 0) { + bclrpat_reg = BCLRPAT_A; + vtotal_reg = VTOTAL_A; + vblank_reg = VBLANK_A; + vsync_reg = VSYNC_A; + pipeconf_reg = PIPEACONF; + pipe_dsl_reg = PIPEADSL; + } else { + bclrpat_reg = BCLRPAT_B; + vtotal_reg = VTOTAL_B; + vblank_reg = VBLANK_B; + vsync_reg = VSYNC_B; + pipeconf_reg = PIPEBCONF; + pipe_dsl_reg = PIPEBDSL; + } + + save_bclrpat = I915_READ(bclrpat_reg); + save_vtotal = I915_READ(vtotal_reg); + vblank = I915_READ(vblank_reg); + + vtotal = ((save_vtotal >> 16) & 0xfff) + 1; + vactive = (save_vtotal & 0x7ff) + 1; + + vblank_start = (vblank & 0xfff) + 1; + vblank_end = ((vblank >> 16) & 0xfff) + 1; + + /* Set the border color to purple. */ + I915_WRITE(bclrpat_reg, 0x500050); + + if (IS_I9XX(dev)) { + uint32_t pipeconf = I915_READ(pipeconf_reg); + I915_WRITE(pipeconf_reg, pipeconf | PIPECONF_FORCE_BORDER); + /* Wait for next Vblank to substitue + * border color for Color info */ + intel_wait_for_vblank(dev); + st00 = I915_READ8(VGA_MSR_WRITE); + status = ((st00 & (1 << 4)) != 0) ? + connector_status_connected : + connector_status_disconnected; + + I915_WRITE(pipeconf_reg, pipeconf); + } else { + bool restore_vblank = false; + int count, detect; + + /* + * If there isn't any border, add some. + * Yes, this will flicker + */ + if (vblank_start <= vactive && vblank_end >= vtotal) { + uint32_t vsync = I915_READ(vsync_reg); + uint32_t vsync_start = (vsync & 0xffff) + 1; + + vblank_start = vsync_start; + I915_WRITE(vblank_reg, + (vblank_start - 1) | + ((vblank_end - 1) << 16)); + restore_vblank = true; + } + /* sample in the vertical border, selecting the larger one */ + if (vblank_start - vactive >= vtotal - vblank_end) + vsample = (vblank_start + vactive) >> 1; + else + vsample = (vtotal + vblank_end) >> 1; + + /* + * Wait for the border to be displayed + */ + while (I915_READ(pipe_dsl_reg) >= vactive) + ; + while ((dsl = I915_READ(pipe_dsl_reg)) <= vsample) + ; + /* + * Watch ST00 for an entire scanline + */ + detect = 0; + count = 0; + do { + count++; + /* Read the ST00 VGA status register */ + st00 = I915_READ8(VGA_MSR_WRITE); + if (st00 & (1 << 4)) + detect++; + } while ((I915_READ(pipe_dsl_reg) == dsl)); + + /* restore vblank if necessary */ + if (restore_vblank) + I915_WRITE(vblank_reg, vblank); + /* + * If more than 3/4 of the scanline detected a monitor, + * then it is assumed to be present. This works even on i830, + * where there isn't any way to force the border color across + * the screen + */ + status = detect * 4 > count * 3 ? + connector_status_connected : + connector_status_disconnected; + } + + /* Restore previous settings */ + I915_WRITE(bclrpat_reg, save_bclrpat); + + return status; +} + static enum drm_connector_status intel_crt_detect(struct drm_connector *connector) { struct drm_device *dev = connector->dev; + struct intel_output *intel_output = to_intel_output(connector); + struct drm_encoder *encoder = &intel_output->enc; + struct drm_crtc *crtc; + int dpms_mode; + enum drm_connector_status status; if (IS_I9XX(dev) && !IS_I915G(dev) && !IS_I915GM(dev)) { if (intel_crt_detect_hotplug(connector)) @@ -212,8 +345,20 @@ static enum drm_connector_status intel_crt_detect(struct drm_connector *connecto if (intel_crt_detect_ddc(connector)) return connector_status_connected; - /* TODO use load detect */ - return connector_status_unknown; + /* for pre-945g platforms use load detect */ + if (encoder->crtc && encoder->crtc->enabled) { + status = intel_crt_load_detect(encoder->crtc, intel_output); + } else { + crtc = intel_get_load_detect_pipe(intel_output, + NULL, &dpms_mode); + if (crtc) { + status = intel_crt_load_detect(crtc, intel_output); + intel_release_load_detect_pipe(intel_output, dpms_mode); + } else + status = connector_status_unknown; + } + + return status; } static void intel_crt_destroy(struct drm_connector *connector) -- cgit v1.2.3 From 564346224daaa8f7222d7a92cdbb7bafde59ae6e Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Tue, 26 May 2009 20:54:41 +0930 Subject: lguest: fix on Intel when KVM loaded (unhandled trap 13) When KVM is loaded, and hence VT set up, the vmcall instruction in an lguest guest causes a #GP, not #UD. Signed-off-by: Rusty Russell Signed-off-by: Linus Torvalds --- drivers/lguest/x86/core.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/lguest/x86/core.c b/drivers/lguest/x86/core.c index 1a83910f674f..eaf722fe309a 100644 --- a/drivers/lguest/x86/core.c +++ b/drivers/lguest/x86/core.c @@ -358,6 +358,16 @@ void lguest_arch_handle_trap(struct lg_cpu *cpu) if (emulate_insn(cpu)) return; } + /* If KVM is active, the vmcall instruction triggers a + * General Protection Fault. Normally it triggers an + * invalid opcode fault (6): */ + case 6: + /* We need to check if ring == GUEST_PL and + * faulting instruction == vmcall. */ + if (is_hypercall(cpu)) { + rewrite_hypercall(cpu); + return; + } break; case 14: /* We've intercepted a Page Fault. */ /* The Guest accessed a virtual address that wasn't mapped. @@ -403,15 +413,6 @@ void lguest_arch_handle_trap(struct lg_cpu *cpu) * up the pointer now to indicate a hypercall is pending. */ cpu->hcall = (struct hcall_args *)cpu->regs; return; - case 6: - /* kvm hypercalls trigger an invalid opcode fault (6). - * We need to check if ring == GUEST_PL and - * faulting instruction == vmcall. */ - if (is_hypercall(cpu)) { - rewrite_hypercall(cpu); - return; - } - break; } /* We didn't handle the trap, so it needs to go to the Guest. */ -- cgit v1.2.3 From e76a16deb8785317a23cca7204331af053e0fb4e Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Tue, 26 May 2009 17:44:56 -0700 Subject: drm/i915: Fix tiling pitch handling on 8xx. The pitch field is an exponent on pre-965, so we were rejecting buffers on 8xx that we shouldn't have. 915 got lucky in that the largest legal value happened to match (8KB / 512 = 0x10), but 8xx has a smaller tile width. Additionally, we programmed that bad value into the register on 8xx, so the only pitch that would work correctly was 4096 (512-1023 pixels), while others would probably give bad rendering or hangs. Signed-off-by: Eric Anholt fd.o bug #20473. --- drivers/gpu/drm/i915/i915_gem.c | 6 ++++-- drivers/gpu/drm/i915/i915_gem_tiling.c | 14 +++++++++++--- drivers/gpu/drm/i915/i915_reg.h | 3 ++- 3 files changed, 17 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 717b6a854bcd..e4408daf8cef 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2128,8 +2128,10 @@ static void i830_write_fence_reg(struct drm_i915_fence_reg *reg) return; } - pitch_val = (obj_priv->stride / 128) - 1; - WARN_ON(pitch_val & ~0x0000000f); + pitch_val = obj_priv->stride / 128; + pitch_val = ffs(pitch_val) - 1; + WARN_ON(pitch_val > I830_FENCE_MAX_PITCH_VAL); + val = obj_priv->gtt_offset; if (obj_priv->tiling_mode == I915_TILING_Y) val |= 1 << I830_FENCE_TILING_Y_SHIFT; diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c index 52a059354e83..540dd336e6ec 100644 --- a/drivers/gpu/drm/i915/i915_gem_tiling.c +++ b/drivers/gpu/drm/i915/i915_gem_tiling.c @@ -213,7 +213,8 @@ i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode) if (tiling_mode == I915_TILING_NONE) return true; - if (tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev)) + if (!IS_I9XX(dev) || + (tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev))) tile_width = 128; else tile_width = 512; @@ -225,11 +226,18 @@ i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode) if (stride / 128 > I965_FENCE_MAX_PITCH_VAL) return false; } else if (IS_I9XX(dev)) { - if (stride / tile_width > I830_FENCE_MAX_PITCH_VAL || + uint32_t pitch_val = ffs(stride / tile_width) - 1; + + /* XXX: For Y tiling, FENCE_MAX_PITCH_VAL is actually 6 (8KB) + * instead of 4 (2KB) on 945s. + */ + if (pitch_val > I915_FENCE_MAX_PITCH_VAL || size > (I830_FENCE_MAX_SIZE_VAL << 20)) return false; } else { - if (stride / 128 > I830_FENCE_MAX_PITCH_VAL || + uint32_t pitch_val = ffs(stride / tile_width) - 1; + + if (pitch_val > I830_FENCE_MAX_PITCH_VAL || size > (I830_FENCE_MAX_SIZE_VAL << 19)) return false; } diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 9668cc0d7f4e..375569d01d01 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -190,7 +190,8 @@ #define I830_FENCE_SIZE_BITS(size) ((ffs((size) >> 19) - 1) << 8) #define I830_FENCE_PITCH_SHIFT 4 #define I830_FENCE_REG_VALID (1<<0) -#define I830_FENCE_MAX_PITCH_VAL 0x10 +#define I915_FENCE_MAX_PITCH_VAL 0x10 +#define I830_FENCE_MAX_PITCH_VAL 6 #define I830_FENCE_MAX_SIZE_VAL (1<<8) #define I915_FENCE_START_MASK 0x0ff00000 -- cgit v1.2.3 From cfa16a0de5392c54db553ec2233a7110e4b4da7a Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Tue, 26 May 2009 18:46:16 -0700 Subject: drm/i915: Apply a big hammer to 865 GEM object CPU cache flushing. On the 865, but not the 855, the clflush we do appears to not actually make it out to the hardware all the time. An easy way to safely reproduce was X -retro, which would show that some of the blits involved in drawing the lovely root weave didn't make it out to the hardware. Those blits are 32 bytes each, and 1-2 would be missing at various points around the screen. Other experimentation (doing more clflush, doing more AGP chipset flush, poking at some more device registers to maybe trigger more flushing) didn't help. krh came up with the wbinvd as a way to successfully get all those blits to appear. Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_gem.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index e4408daf8cef..e2421869a40c 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2423,6 +2423,16 @@ i915_gem_clflush_object(struct drm_gem_object *obj) if (obj_priv->pages == NULL) return; + /* XXX: The 865 in particular appears to be weird in how it handles + * cache flushing. We haven't figured it out, but the + * clflush+agp_chipset_flush doesn't appear to successfully get the + * data visible to the PGU, while wbinvd + agp_chipset_flush does. + */ + if (IS_I865G(obj->dev)) { + wbinvd(); + return; + } + drm_clflush_pages(obj_priv->pages, obj->size / PAGE_SIZE); } -- cgit v1.2.3 From 87ad57bacb25c3f24c54f142ef445f68277705f0 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Tue, 19 May 2009 16:09:42 +0800 Subject: cpuidle: makes AMD C1E work in acpi_idle When AMD C1E is enabled, local APIC timer will stop even in C1. This patch uses broadcast IPI to replace local APIC timer in C1. http://bugzilla.kernel.org/show_bug.cgi?id=13233 [ impact: avoid boot hang in AMD CPU with C1E enabled ] Tested-by: Dmitry Lyzhyn Signed-off-by: Shaohua Li Signed-off-by: Len Brown --- drivers/acpi/processor_idle.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 72069ba5f1ed..6b7bcc7e3e1d 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -148,6 +148,9 @@ static void acpi_timer_check_state(int state, struct acpi_processor *pr, if (cpu_has(&cpu_data(pr->id), X86_FEATURE_ARAT)) return; + if (boot_cpu_has(X86_FEATURE_AMDC1E)) + type = ACPI_STATE_C1; + /* * Check, if one of the previous states already marked the lapic * unstable @@ -611,6 +614,7 @@ static int acpi_processor_power_verify(struct acpi_processor *pr) switch (cx->type) { case ACPI_STATE_C1: cx->valid = 1; + acpi_timer_check_state(i, pr, cx); break; case ACPI_STATE_C2: @@ -835,6 +839,7 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev, return 0; } + acpi_state_timer_broadcast(pr, cx, 1); kt1 = ktime_get_real(); acpi_idle_do_entry(cx); kt2 = ktime_get_real(); @@ -842,6 +847,7 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev, local_irq_enable(); cx->usage++; + acpi_state_timer_broadcast(pr, cx, 0); return idle_time; } -- cgit v1.2.3 From 7d60e8ab0d5507229dfbdf456501cc378610fa01 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Tue, 19 May 2009 16:09:54 +0800 Subject: cpuidle: fix AMD C1E suspend hang When AMD C1E is enabled, local APIC timer will stop even in C1. To avoid suspend/resume hang, this patch removes C1 and replace it with a cpu_relax() in suspend/resume path. This hasn't any impact in runtime path. http://bugzilla.kernel.org/show_bug.cgi?id=13233 [ impact: avoid suspend/resume hang in AMD CPU with C1E enabled ] Tested-by: Dmitry Lyzhyn Signed-off-by: Shaohua Li Signed-off-by: Len Brown --- drivers/acpi/processor_idle.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 6b7bcc7e3e1d..10a2d913635a 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -834,8 +834,8 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev, /* Do not access any ACPI IO ports in suspend path */ if (acpi_idle_suspend) { - acpi_safe_halt(); local_irq_enable(); + cpu_relax(); return 0; } -- cgit v1.2.3 From 18a36c1a398055e87a3646738abf3c1b0e98e7e2 Mon Sep 17 00:00:00 2001 From: Xiaotian Feng Date: Tue, 26 May 2009 20:48:04 -0700 Subject: gianfar: fix babbling rx error event bug Gianfar interrupt handler uses IEVENT_ERR_MASK to check and handle errors. Babbling RX error (IEVENT_BABR) should be included in IEVENT_ERROR_MASK. Otherwise if BABR is raised, it never gets handled nor cleared, and an interrupt storm results. This has been observed to happen on sending a burst of ethernet frames to a gianfar based board. Signed-off-by: Xiaotian Feng Signed-off-by: David S. Miller --- drivers/net/gianfar.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h index 0642d52aef5c..cf352961ae9b 100644 --- a/drivers/net/gianfar.h +++ b/drivers/net/gianfar.h @@ -259,7 +259,7 @@ extern const char gfar_driver_version[]; (IEVENT_RXC | IEVENT_BSY | IEVENT_EBERR | IEVENT_MSRO | \ IEVENT_BABT | IEVENT_TXC | IEVENT_TXE | IEVENT_LC \ | IEVENT_CRL | IEVENT_XFUN | IEVENT_DPE | IEVENT_PERR \ - | IEVENT_MAG) + | IEVENT_MAG | IEVENT_BABR) #define IMASK_INIT_CLEAR 0x00000000 #define IMASK_BABR 0x80000000 -- cgit v1.2.3 From 5ad18900355743757e7f415bcb850ea8406a13e2 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Tue, 26 May 2009 20:50:12 -0700 Subject: atlx: move modinfo data from atlx.h to atl1.c Both atl1.c and atl2.c include atlx.h, which defines some modinfo stuff. But atl2.c seems like it doesn't want the modinfo data from atlx.h, as it defines its own. Running modinfo on atl2.ko, we get conflicting information: $ /sbin/modinfo drivers/net/atlx/atl2.ko | egrep "version|description|author" version: 2.2.3 description: Atheros Fast Ethernet Network Driver author: Atheros Corporation , Chris Snook version: 2.1.3 author: Xiong Huang , Chris Snook , Jay Cliburn Move the modinfo data out of atlx.h and into atl1.c to eliminate the confusion: $ /sbin/modinfo drivers/net/atlx/atl1.ko | egrep "version|description|author" version: 2.1.3 author: Xiong Huang , Chris Snook , Jay Cliburn description: Atheros L1 Gigabit Ethernet Driver $ /sbin/modinfo drivers/net/atlx/atl2.ko | egrep "version|description|author" version: 2.2.3 description: Atheros Fast Ethernet Network Driver author: Atheros Corporation , Chris Snook Reported-by: Scott Scriven Signed-off-by: Alex Chiang Acked-by: Jay Cliburn Signed-off-by: David S. Miller --- drivers/net/atlx/atl1.c | 6 ++++++ drivers/net/atlx/atlx.h | 6 ------ 2 files changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index 0ab22540bf59..4e817126e280 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -82,6 +82,12 @@ #include "atl1.h" +#define ATLX_DRIVER_VERSION "2.1.3" +MODULE_AUTHOR("Xiong Huang , \ + Chris Snook , Jay Cliburn "); +MODULE_LICENSE("GPL"); +MODULE_VERSION(ATLX_DRIVER_VERSION); + /* Temporary hack for merging atl1 and atl2 */ #include "atlx.c" diff --git a/drivers/net/atlx/atlx.h b/drivers/net/atlx/atlx.h index 297a03da6b7f..14054b75aa62 100644 --- a/drivers/net/atlx/atlx.h +++ b/drivers/net/atlx/atlx.h @@ -29,12 +29,6 @@ #include #include -#define ATLX_DRIVER_VERSION "2.1.3" -MODULE_AUTHOR("Xiong Huang , \ - Chris Snook , Jay Cliburn "); -MODULE_LICENSE("GPL"); -MODULE_VERSION(ATLX_DRIVER_VERSION); - #define ATLX_ERR_PHY 2 #define ATLX_ERR_PHY_SPEED 7 #define ATLX_ERR_PHY_RES 8 -- cgit v1.2.3 From b63dc8fef7ca5c51d163295d824e78c770d48ccf Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 26 May 2009 20:55:33 -0700 Subject: bfin_mac: fix build error due to net_device_ops convert MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The previous commit "convert to net_device_ops" broke the Blackfin MAC driver as it declared the new structure before the function it used: CC drivers/net/bfin_mac.o drivers/net/bfin_mac.c:984: error: ‘bfin_mac_close’ undeclared here (not in a function) make[1]: *** [drivers/net/bfin_mac.o] Error 1 Signed-off-by: Mike Frysinger Signed-off-by: David S. Miller --- drivers/net/bfin_mac.c | 29 ++++++++++++++--------------- 1 file changed, 14 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c index 9f971ed6b58d..b4da18213324 100644 --- a/drivers/net/bfin_mac.c +++ b/drivers/net/bfin_mac.c @@ -979,22 +979,7 @@ static int bfin_mac_open(struct net_device *dev) return 0; } -static const struct net_device_ops bfin_mac_netdev_ops = { - .ndo_open = bfin_mac_open, - .ndo_stop = bfin_mac_close, - .ndo_start_xmit = bfin_mac_hard_start_xmit, - .ndo_set_mac_address = bfin_mac_set_mac_address, - .ndo_tx_timeout = bfin_mac_timeout, - .ndo_set_multicast_list = bfin_mac_set_multicast_list, - .ndo_validate_addr = eth_validate_addr, - .ndo_change_mtu = eth_change_mtu, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = bfin_mac_poll, -#endif -}; - /* - * * this makes the board clean up everything that it can * and not talk to the outside world. Caused by * an 'ifconfig ethX down' @@ -1019,6 +1004,20 @@ static int bfin_mac_close(struct net_device *dev) return 0; } +static const struct net_device_ops bfin_mac_netdev_ops = { + .ndo_open = bfin_mac_open, + .ndo_stop = bfin_mac_close, + .ndo_start_xmit = bfin_mac_hard_start_xmit, + .ndo_set_mac_address = bfin_mac_set_mac_address, + .ndo_tx_timeout = bfin_mac_timeout, + .ndo_set_multicast_list = bfin_mac_set_multicast_list, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = bfin_mac_poll, +#endif +}; + static int __devinit bfin_mac_probe(struct platform_device *pdev) { struct net_device *ndev; -- cgit v1.2.3 From 9d911d7903926a65ef49ec671bacd86bcee5eb51 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Thu, 21 May 2009 16:21:15 -0600 Subject: PCI Hotplug: acpiphp: don't store a pci_dev in acpiphp_func An oops can occur if a user attempts to use both PCI logical hotplug and the ACPI physical hotplug driver (acpiphp) in this sequence, where $slot/address == $device. In other words, if acpiphp has claimed a PCI device, and that device is logically removed, then acpiphp may oops when it attempts to access it again. # echo 1 > /sys/bus/pci/devices/$device/remove # echo 0 > /sys/bus/pci/slots/$slot/power Unable to handle kernel NULL pointer dereference (address 0000000000000000) Call Trace: [] show_stack+0x50/0xa0 [] show_regs+0x820/0x860 [] die+0x190/0x2a0 [] ia64_do_page_fault+0x8e0/0xa40 [] ia64_native_leave_kernel+0x0/0x270 [] pci_remove_bus_device+0x120/0x260 [] acpiphp_disable_slot+0x410/0x540 [acpiphp] [] disable_slot+0xc0/0x120 [acpiphp] [] power_write_file+0x1e0/0x2a0 [pci_hotplug] [] pci_slot_attr_store+0x60/0xa0 [] sysfs_write_file+0x230/0x2c0 [] vfs_write+0x190/0x2e0 [] sys_write+0x80/0x100 [] ia64_ret_from_syscall+0x0/0x20 [] __kernel_syscall_via_break+0x0/0x20 The root cause of this oops is that the logical remove ("echo 1 > /sys/bus/pci/devices/$device/remove") destroyed the pci_dev. The pci_dev struct itself wasn't deallocated because acpiphp kept a reference, but some of its fields became invalid. acpiphp doesn't have any real reason to keep a pointer to a pci_dev around. It can always derive it using pci_get_slot(). If a logical remove destroys the pci_dev, acpiphp won't find it and is thus prevented from causing mischief. Reviewed-by: Matthew Wilcox Reviewed-by: Kenji Kaneshige Tested-by: Kenji Kaneshige Reported-by: Kenji Kaneshige Acked-by: Bjorn Helgaas Signed-off-by: Alex Chiang Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/acpiphp.h | 1 - drivers/pci/hotplug/acpiphp_glue.c | 63 ++++++++++++++++---------------------- 2 files changed, 26 insertions(+), 38 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/acpiphp.h b/drivers/pci/hotplug/acpiphp.h index 4fc168b70095..e68d5f20ffb3 100644 --- a/drivers/pci/hotplug/acpiphp.h +++ b/drivers/pci/hotplug/acpiphp.h @@ -129,7 +129,6 @@ struct acpiphp_func { struct acpiphp_bridge *bridge; /* Ejectable PCI-to-PCI bridge */ struct list_head sibling; - struct pci_dev *pci_dev; struct notifier_block nb; acpi_handle handle; diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index a33794d9e0dc..3a6064bce561 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -32,9 +32,6 @@ /* * Lifetime rules for pci_dev: - * - The one in acpiphp_func has its refcount elevated by pci_get_slot() - * when the driver is loaded or when an insertion event occurs. It loses - * a refcount when its ejected or the driver unloads. * - The one in acpiphp_bridge has its refcount elevated by pci_get_slot() * when the bridge is scanned and it loses a refcount when the bridge * is removed. @@ -130,6 +127,7 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv) unsigned long long adr, sun; int device, function, retval; struct pci_bus *pbus = bridge->pci_bus; + struct pci_dev *pdev; if (!acpi_pci_check_ejectable(pbus, handle) && !is_dock_device(handle)) return AE_OK; @@ -213,10 +211,10 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv) newfunc->slot = slot; list_add_tail(&newfunc->sibling, &slot->funcs); - /* associate corresponding pci_dev */ - newfunc->pci_dev = pci_get_slot(pbus, PCI_DEVFN(device, function)); - if (newfunc->pci_dev) { + pdev = pci_get_slot(pbus, PCI_DEVFN(device, function)); + if (pdev) { slot->flags |= (SLOT_ENABLED | SLOT_POWEREDON); + pci_dev_put(pdev); } if (is_dock_device(handle)) { @@ -617,7 +615,6 @@ static void cleanup_bridge(struct acpiphp_bridge *bridge) if (ACPI_FAILURE(status)) err("failed to remove notify handler\n"); } - pci_dev_put(func->pci_dev); list_del(list); kfree(func); } @@ -1101,22 +1098,24 @@ static int __ref enable_device(struct acpiphp_slot *slot) pci_enable_bridges(bus); pci_bus_add_devices(bus); - /* associate pci_dev to our representation */ list_for_each (l, &slot->funcs) { func = list_entry(l, struct acpiphp_func, sibling); - func->pci_dev = pci_get_slot(bus, PCI_DEVFN(slot->device, - func->function)); - if (!func->pci_dev) + dev = pci_get_slot(bus, PCI_DEVFN(slot->device, + func->function)); + if (!dev) continue; - if (func->pci_dev->hdr_type != PCI_HEADER_TYPE_BRIDGE && - func->pci_dev->hdr_type != PCI_HEADER_TYPE_CARDBUS) + if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE && + dev->hdr_type != PCI_HEADER_TYPE_CARDBUS) { + pci_dev_put(dev); continue; + } status = find_p2p_bridge(func->handle, (u32)1, bus, NULL); if (ACPI_FAILURE(status)) warn("find_p2p_bridge failed (error code = 0x%x)\n", status); + pci_dev_put(dev); } slot->flags |= SLOT_ENABLED; @@ -1142,17 +1141,14 @@ static void disable_bridges(struct pci_bus *bus) */ static int disable_device(struct acpiphp_slot *slot) { - int retval = 0; struct acpiphp_func *func; - struct list_head *l; + struct pci_dev *pdev; /* is this slot already disabled? */ if (!(slot->flags & SLOT_ENABLED)) goto err_exit; - list_for_each (l, &slot->funcs) { - func = list_entry(l, struct acpiphp_func, sibling); - + list_for_each_entry(func, &slot->funcs, sibling) { if (func->bridge) { /* cleanup p2p bridges under this P2P bridge */ cleanup_p2p_bridge(func->bridge->handle, @@ -1160,35 +1156,28 @@ static int disable_device(struct acpiphp_slot *slot) func->bridge = NULL; } - if (func->pci_dev) { - pci_stop_bus_device(func->pci_dev); - if (func->pci_dev->subordinate) { - disable_bridges(func->pci_dev->subordinate); - pci_disable_device(func->pci_dev); + pdev = pci_get_slot(slot->bridge->pci_bus, + PCI_DEVFN(slot->device, func->function)); + if (pdev) { + pci_stop_bus_device(pdev); + if (pdev->subordinate) { + disable_bridges(pdev->subordinate); + pci_disable_device(pdev); } + pci_remove_bus_device(pdev); + pci_dev_put(pdev); } } - list_for_each (l, &slot->funcs) { - func = list_entry(l, struct acpiphp_func, sibling); - + list_for_each_entry(func, &slot->funcs, sibling) { acpiphp_unconfigure_ioapics(func->handle); acpiphp_bus_trim(func->handle); - /* try to remove anyway. - * acpiphp_bus_add might have been failed */ - - if (!func->pci_dev) - continue; - - pci_remove_bus_device(func->pci_dev); - pci_dev_put(func->pci_dev); - func->pci_dev = NULL; } slot->flags &= (~SLOT_ENABLED); - err_exit: - return retval; +err_exit: + return 0; } -- cgit v1.2.3 From ed37d83e6aa218192fb28bb6b82498d2a8c74070 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 27 May 2009 21:39:05 +1000 Subject: md: raid5: change incorrect usage of 'min' macro to 'min_t' A recent patch to raid5.c use min on an int and a sector_t. This isn't allowed. So change it to min_t(sector_t,x,y). Signed-off-by: NeilBrown --- drivers/md/raid5.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 3c3626d2a1f9..5d400aef8d9b 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3811,13 +3811,13 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped safepos = conf->reshape_safe; sector_div(safepos, data_disks); if (mddev->delta_disks < 0) { - writepos -= min(reshape_sectors, writepos); + writepos -= min_t(sector_t, reshape_sectors, writepos); readpos += reshape_sectors; safepos += reshape_sectors; } else { writepos += reshape_sectors; - readpos -= min(reshape_sectors, readpos); - safepos -= min(reshape_sectors, safepos); + readpos -= min_t(sector_t, reshape_sectors, readpos); + safepos -= min_t(sector_t, reshape_sectors, safepos); } /* 'writepos' is the most advanced device address we might write. -- cgit v1.2.3 From 346a850e3c3a20159cef2b79235e6d34aa497c65 Mon Sep 17 00:00:00 2001 From: Manuel Traut Date: Wed, 27 May 2009 06:20:05 -0700 Subject: Input: usb1400_ts - fix access to "device data" in resume function platform_data != driver_data driver data is actually the "correct" place of the struct however it is not placed there due to the need of the ac97 struct. This is broken since d9105c2b01 aka "[ARM] 5184/1: Split ucb1400_ts into core and touchscreen" Signed-off-by: Manuel Traut Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/ucb1400_ts.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c index f100c7f4c1db..6954f5500108 100644 --- a/drivers/input/touchscreen/ucb1400_ts.c +++ b/drivers/input/touchscreen/ucb1400_ts.c @@ -419,7 +419,7 @@ static int ucb1400_ts_remove(struct platform_device *dev) #ifdef CONFIG_PM static int ucb1400_ts_resume(struct platform_device *dev) { - struct ucb1400_ts *ucb = platform_get_drvdata(dev); + struct ucb1400_ts *ucb = dev->dev.platform_data; if (ucb->ts_task) { /* -- cgit v1.2.3 From 07f4f3e8a24138ca2f3650723d670df25687cd05 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Kristian=20H=C3=B8gsberg?= Date: Wed, 27 May 2009 14:37:28 -0400 Subject: i915: Set object to gtt domain when faulting it back in MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When a GEM object is evicted from the GTT we set it to the CPU domain, as it might get swapped in and out or ever mmapped regularly. If the object is mmapped through the GTT it can still get evicted in this way by other objects requiring GTT space. When the GTT mapping is touched again we fault it back into the GTT, but fail to set it back to the GTT domain. This means we fail to flush any cached CPU writes to the pages backing the object which will then happen "eventually", typically after we write to the page through the uncached GTT mapping. [anholt: Note that userland does do a set_domain(GTT, GTT) when starting to access the GTT mapping. That covers getting the existing mapping of the object synchronized if it's bound to the GTT. But set_domain(GTT, GTT) doesn't do anything if the object is currently unbound. This fix covers the transition to being bound for GTT mapping.] Fixes glyph and other pixmap corruption during swapping. fd.o bug #21790 Signed-off-by: Kristian Høgsberg Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_gem.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index e2421869a40c..670d12881468 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1145,6 +1145,13 @@ int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf) mutex_unlock(&dev->struct_mutex); return VM_FAULT_SIGBUS; } + + ret = i915_gem_object_set_to_gtt_domain(obj, write); + if (ret) { + mutex_unlock(&dev->struct_mutex); + return VM_FAULT_SIGBUS; + } + list_add_tail(&obj_priv->list, &dev_priv->mm.inactive_list); } -- cgit v1.2.3 From b787f2e2a37a373a045f4d9b9bed941ccff01663 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 13 May 2009 16:25:57 -0500 Subject: fsldma: Fix compile warnings We we build with dma_addr_t as a 64-bit quantity we get: drivers/dma/fsldma.c: In function 'fsl_chan_xfer_ld_queue': drivers/dma/fsldma.c:625: warning: cast to pointer from integer of different size drivers/dma/fsldma.c: In function 'fsl_dma_chan_do_interrupt': drivers/dma/fsldma.c:737: warning: cast to pointer from integer of different size drivers/dma/fsldma.c:737: warning: cast to pointer from integer of different size drivers/dma/fsldma.c: In function 'of_fsl_dma_probe': drivers/dma/fsldma.c:927: warning: cast to pointer from integer of different Signed-off-by: Kumar Gala Signed-off-by: Dan Williams --- drivers/dma/fsldma.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index 15783102bf17..f18d1bde0439 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -641,8 +641,8 @@ static void fsl_chan_xfer_ld_queue(struct fsl_dma_chan *fsl_chan) if (ld_node != &fsl_chan->ld_queue) { /* Get the ld start address from ld_queue */ next_dest_addr = to_fsl_desc(ld_node)->async_tx.phys; - dev_dbg(fsl_chan->dev, "xfer LDs staring from %p\n", - (void *)next_dest_addr); + dev_dbg(fsl_chan->dev, "xfer LDs staring from 0x%llx\n", + (unsigned long long)next_dest_addr); set_cdar(fsl_chan, next_dest_addr); dma_start(fsl_chan); } else { @@ -756,8 +756,9 @@ static irqreturn_t fsl_dma_chan_do_interrupt(int irq, void *data) */ if (stat & FSL_DMA_SR_EOSI) { dev_dbg(fsl_chan->dev, "event: End-of-segments INT\n"); - dev_dbg(fsl_chan->dev, "event: clndar %p, nlndar %p\n", - (void *)get_cdar(fsl_chan), (void *)get_ndar(fsl_chan)); + dev_dbg(fsl_chan->dev, "event: clndar 0x%llx, nlndar 0x%llx\n", + (unsigned long long)get_cdar(fsl_chan), + (unsigned long long)get_ndar(fsl_chan)); stat &= ~FSL_DMA_SR_EOSI; update_cookie = 1; } @@ -947,8 +948,8 @@ static int __devinit of_fsl_dma_probe(struct of_device *dev, } dev_info(&dev->dev, "Probe the Freescale DMA driver for %s " - "controller at %p...\n", - match->compatible, (void *)fdev->reg.start); + "controller at 0x%llx...\n", + match->compatible, (unsigned long long)fdev->reg.start); fdev->reg_base = ioremap(fdev->reg.start, fdev->reg.end - fdev->reg.start + 1); -- cgit v1.2.3 From dacd2549ca61ddbdd1ed62a76ca95dea3f0e02c6 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Tue, 26 May 2009 09:08:03 +0900 Subject: PCI/ACPI: fix wrong ref count handling in acpi_pci_bind() The 'dev' field of struct acpi_pci_data is having a pointer to struct pci_dev without incrementing the reference counter. Because of this, I got the following kernel oops when I was doing some pci hotplug operations. This patch fixes this bug by replacing wrong hand-made pci_find_slot() with pci_get_slot() in acpi_pci_bind(). BUG: unable to handle kernel NULL pointer dereference at 00000000000000e8 IP: [] acpi_pci_unbind+0xb1/0xdd Call Trace: [] acpi_bus_remove+0x54/0x68 [] acpi_bus_trim+0x75/0xe3 [] acpiphp_disable_slot+0x16d/0x1e0 [acpiphp] [] disable_slot+0x20/0x60 [acpiphp] [] power_write_file+0xc8/0x110 [] pci_slot_attr_store+0x24/0x30 [] sysfs_write_file+0xce/0x140 [] vfs_write+0xc7/0x170 [] sys_write+0x50/0x90 [] system_call_fastpath+0x16/0x1b Signed-off-by: Kenji Kaneshige Reviewed-by: Bjorn Helgaas Reviewed-by: Alex Chiang Tested-by: Alex Chiang Signed-off-by: Len Brown --- drivers/acpi/pci_bind.c | 24 ++++++------------------ 1 file changed, 6 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/pci_bind.c b/drivers/acpi/pci_bind.c index 95650f83ce2e..bc46de3d967f 100644 --- a/drivers/acpi/pci_bind.c +++ b/drivers/acpi/pci_bind.c @@ -116,9 +116,6 @@ int acpi_pci_bind(struct acpi_device *device) struct acpi_pci_data *pdata; struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; acpi_handle handle; - struct pci_dev *dev; - struct pci_bus *bus; - if (!device || !device->parent) return -EINVAL; @@ -176,20 +173,9 @@ int acpi_pci_bind(struct acpi_device *device) * Locate matching device in PCI namespace. If it doesn't exist * this typically means that the device isn't currently inserted * (e.g. docking station, port replicator, etc.). - * We cannot simply search the global pci device list, since - * PCI devices are added to the global pci list when the root - * bridge start ops are run, which may not have happened yet. */ - bus = pci_find_bus(data->id.segment, data->id.bus); - if (bus) { - list_for_each_entry(dev, &bus->devices, bus_list) { - if (dev->devfn == PCI_DEVFN(data->id.device, - data->id.function)) { - data->dev = dev; - break; - } - } - } + data->dev = pci_get_slot(pdata->bus, + PCI_DEVFN(data->id.device, data->id.function)); if (!data->dev) { ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device %04x:%02x:%02x.%d not present in PCI namespace\n", @@ -259,9 +245,10 @@ int acpi_pci_bind(struct acpi_device *device) end: kfree(buffer.pointer); - if (result) + if (result) { + pci_dev_put(data->dev); kfree(data); - + } return result; } @@ -303,6 +290,7 @@ static int acpi_pci_unbind(struct acpi_device *device) if (data->dev->subordinate) { acpi_pci_irq_del_prt(data->id.segment, data->bus->number); } + pci_dev_put(data->dev); kfree(data); end: -- cgit v1.2.3 From a3ce6ea46cc0d6397d1b92b1a5983bb2935306ed Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 28 May 2009 09:51:31 -0700 Subject: Input: libps2 - better handle bad scheduler decisions Sometimes devices send us their responses in time but due to unfortunate scheduling decisions the receiving thread does not get scheduled till much later and we erroneously decide that device timed out. Work around this problem by checking whether we received the data we needed instead of checking timeout condition. Tested-by: Sitsofe Wheeler Signed-off-by: Dmitry Torokhov --- drivers/input/serio/libps2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/serio/libps2.c b/drivers/input/serio/libps2.c index 67248c31e19a..be5bbbb8ae4e 100644 --- a/drivers/input/serio/libps2.c +++ b/drivers/input/serio/libps2.c @@ -210,7 +210,7 @@ int ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command) timeout = wait_event_timeout(ps2dev->wait, !(ps2dev->flags & PS2_FLAG_CMD1), timeout); - if (ps2dev->cmdcnt && timeout > 0) { + if (ps2dev->cmdcnt && !(ps2dev->flags & PS2_FLAG_CMD1)) { timeout = ps2_adjust_timeout(ps2dev, command, timeout); wait_event_timeout(ps2dev->wait, -- cgit v1.2.3 From f42706c90470851fd2e97eda7a4109e8949bde8a Mon Sep 17 00:00:00 2001 From: Martin Fuzzey Date: Fri, 1 May 2009 17:21:11 +0200 Subject: USB: atmel-usba-udc : fix control out requests. usbtest #14 was failing with "udc: ep0: TXCOMP: Invalid endpoint state 2, halting endpoint..." This occured since ep0 is bidirectional and ep->is_in is not valid (must always use ep->state) Signed-off-by: Martin Fuzzey Acked-by: David Brownell Acked-by: Haavard Skinnemoen Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/atmel_usba_udc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index 563d57275448..5644897c1c5d 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -794,7 +794,8 @@ usba_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) if (ep->desc) { list_add_tail(&req->queue, &ep->queue); - if (ep->is_in || (ep_is_control(ep) + if ((!ep_is_control(ep) && ep->is_in) || + (ep_is_control(ep) && (ep->state == DATA_STAGE_IN || ep->state == STATUS_STAGE_IN))) usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY); -- cgit v1.2.3 From fe92c9e481a147a9e1e14f55870f32903b967777 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Mon, 4 May 2009 17:22:43 -0700 Subject: USB: atmel_usb_udc: Use kzalloc() to allocate ep structures This ensures that all fields are properly initialized. Signed-off-by: Haavard Skinnemoen Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/atmel_usba_udc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index 5644897c1c5d..05c913cc3658 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -1941,7 +1941,7 @@ static int __init usba_udc_probe(struct platform_device *pdev) usba_writel(udc, CTRL, USBA_DISABLE_MASK); clk_disable(pclk); - usba_ep = kmalloc(sizeof(struct usba_ep) * pdata->num_ep, + usba_ep = kzalloc(sizeof(struct usba_ep) * pdata->num_ep, GFP_KERNEL); if (!usba_ep) goto err_alloc_ep; -- cgit v1.2.3 From cab98a0a349829b145d924c0649a2d30cd6a9e3d Mon Sep 17 00:00:00 2001 From: Xiao Kaijian Date: Fri, 8 May 2009 00:48:23 +0800 Subject: USB: Yet another Conexant Clone to add to cdc-acm.c This patch adds another quirky Conexant USB Modem Clone to usb cdc-acm.c Signed-off-by: Xiao Kaijian Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 0a69c0977e3f..7a1164dd1d37 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1375,6 +1375,9 @@ static struct usb_device_id acm_ids[] = { { USB_DEVICE(0x0572, 0x1324), /* Conexant USB MODEM RD02-D400 */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, + { USB_DEVICE(0x0572, 0x1328), /* Shiro / Aztech USB MODEM UM-3100 */ + .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ + }, { USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */ }, { USB_DEVICE(0x0572, 0x1329), /* Hummingbird huc56s (Conexant) */ -- cgit v1.2.3 From 0afb20e00b5053170c85298fed842b32d20b4ea9 Mon Sep 17 00:00:00 2001 From: Warren Free Date: Fri, 8 May 2009 10:27:08 +0200 Subject: USB: isp1760: urb_dequeue doesn't always find the urbs The option driver (and presumably others) allocates several URBs when it opens and tries to free them when it closes. The isp1760_urb_dequeue function gets called, but the packet being dequeued is not necessarily at the front of one of the 32 queues. If not, the isp1760_urb_done function doesn't get called for the URB and the process trying to free it hangs forever on a wait_queue. This patch does two things. If the URB being dequeued has others queued behind it, it re-queues them. And it searches the queues looking for the URB being dequeued rather than just looking at the one at the front of the queue. [bigeasy@linutronix] whitespace fixes, reformating Cc: stable Signed-off-by: Warren Free Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/isp1760-hcd.c | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index cd07ea3f0c63..15438469f21a 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -1658,6 +1658,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, u32 reg_base, or_reg, skip_reg; unsigned long flags; struct ptd ptd; + packet_enqueue *pe; switch (usb_pipetype(urb->pipe)) { case PIPE_ISOCHRONOUS: @@ -1669,6 +1670,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, reg_base = INT_REGS_OFFSET; or_reg = HC_INT_IRQ_MASK_OR_REG; skip_reg = HC_INT_PTD_SKIPMAP_REG; + pe = enqueue_an_INT_packet; break; default: @@ -1676,6 +1678,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, reg_base = ATL_REGS_OFFSET; or_reg = HC_ATL_IRQ_MASK_OR_REG; skip_reg = HC_ATL_PTD_SKIPMAP_REG; + pe = enqueue_an_ATL_packet; break; } @@ -1687,6 +1690,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, u32 skip_map; u32 or_map; struct isp1760_qtd *qtd; + struct isp1760_qh *qh = ints->qh; skip_map = isp1760_readl(hcd->regs + skip_reg); skip_map |= 1 << i; @@ -1699,8 +1703,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, priv_write_copy(priv, (u32 *)&ptd, hcd->regs + reg_base + i * sizeof(ptd), sizeof(ptd)); qtd = ints->qtd; - - clean_up_qtdlist(qtd); + qtd = clean_up_qtdlist(qtd); free_mem(priv, ints->payload); @@ -1711,7 +1714,24 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, ints->payload = 0; isp1760_urb_done(priv, urb, status); + if (qtd) + pe(hcd, qh, qtd); break; + + } else if (ints->qtd) { + struct isp1760_qtd *qtd, *prev_qtd = ints->qtd; + + for (qtd = ints->qtd->hw_next; qtd; qtd = qtd->hw_next) { + if (qtd->urb == urb) { + prev_qtd->hw_next = clean_up_qtdlist(qtd); + isp1760_urb_done(priv, urb, status); + break; + } + prev_qtd = qtd; + } + /* we found the urb before the end of the list */ + if (qtd) + break; } ints++; } -- cgit v1.2.3 From 0a3c8549ea7e94d74a41096d42bc6cdf43d183bf Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 27 May 2009 11:25:52 -0400 Subject: usb-serial: fix crash when sub-driver updates firmware This patch (as1244) fixes a crash in usb-serial that occurs when a sub-driver returns a positive value from its attach method, indicating that new firmware was loaded and the device will disconnect and reconnect. The usb-serial core then skips the step of registering the port devices; when the disconnect occurs, the attempt to unregister the ports fails dramatically. This problem shows up with Keyspan devices and it might affect others as well. When the attach method returns a positive value, the patch sets num_ports to 0. This tells usb_serial_disconnect() not to try unregistering any of the ports; instead they are cleaned up by destroy_serial(). Signed-off-by: Alan Stern Tested-by: Benjamin Herrenschmidt Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb-serial.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 0a566eea49c0..f331e2bde88a 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -974,6 +974,7 @@ int usb_serial_probe(struct usb_interface *interface, if (retval > 0) { /* quietly accept this device, but don't bind to a serial port as it's about to disappear */ + serial->num_ports = 0; goto exit; } } -- cgit v1.2.3 From 29868b281f6d057b4cbe348f4483f1717c021c5c Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 20 May 2009 08:49:48 -0400 Subject: Revert "USB: Correct Makefile to make isp1760 buildable" This reverts commit 26e1287594864169577327fef233befc9739be3b. A larger patch (f7e7aa585) a few days after this one added the same line to the Makefile, but in a different place. While it'd be more correct to revert that one, it's easier to revert this one because this is a one-liner. Signed-off-by: Mike Frysinger CC: Greg Kroah-Hartman CC: linux-usb@vger.kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/Makefile | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 0716cdb44cd8..0a3dc5ece634 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -11,7 +11,6 @@ obj-$(CONFIG_USB_MON) += mon/ obj-$(CONFIG_PCI) += host/ obj-$(CONFIG_USB_EHCI_HCD) += host/ obj-$(CONFIG_USB_ISP116X_HCD) += host/ -obj-$(CONFIG_USB_ISP1760_HCD) += host/ obj-$(CONFIG_USB_OHCI_HCD) += host/ obj-$(CONFIG_USB_UHCI_HCD) += host/ obj-$(CONFIG_USB_FHCI_HCD) += host/ -- cgit v1.2.3 From 5c8563d773c0e9f0ac2a552e84806decd98ce732 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Thu, 28 May 2009 14:24:07 -0700 Subject: Driver Core: do not oops when driver_unregister() is called for unregistered drivers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We also fix a problem with cleaning up properly when initializing drivers and devices, so checks like this will work successfully. Portions of the patch by Linus and Greg and Ingo. Reported-by: Ozan Çağlayan Signed-off-by: Kay Sievers Cc: Linus Torvalds Cc: Ingo Molnar Signed-off-by: Greg Kroah-Hartman --- drivers/base/bus.c | 4 +++- drivers/base/core.c | 5 ++++- drivers/base/driver.c | 4 ++++ 3 files changed, 11 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/base/bus.c b/drivers/base/bus.c index dc030f1f00f1..c6599618523e 100644 --- a/drivers/base/bus.c +++ b/drivers/base/bus.c @@ -700,8 +700,10 @@ int bus_add_driver(struct device_driver *drv) } kobject_uevent(&priv->kobj, KOBJ_ADD); - return error; + return 0; out_unregister: + kfree(drv->p); + drv->p = NULL; kobject_put(&priv->kobj); out_put_bus: bus_put(bus); diff --git a/drivers/base/core.c b/drivers/base/core.c index 4aa527b8a913..1977d4beb89e 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -879,7 +879,7 @@ int device_add(struct device *dev) } if (!dev_name(dev)) - goto done; + goto name_error; pr_debug("device: '%s': %s\n", dev_name(dev), __func__); @@ -978,6 +978,9 @@ done: cleanup_device_parent(dev); if (parent) put_device(parent); +name_error: + kfree(dev->p); + dev->p = NULL; goto done; } diff --git a/drivers/base/driver.c b/drivers/base/driver.c index c51f11bb29ae..8ae0f63602e0 100644 --- a/drivers/base/driver.c +++ b/drivers/base/driver.c @@ -257,6 +257,10 @@ EXPORT_SYMBOL_GPL(driver_register); */ void driver_unregister(struct device_driver *drv) { + if (!drv || !drv->p) { + WARN(1, "Unexpected driver unregister!\n"); + return; + } driver_remove_groups(drv, drv->groups); bus_remove_driver(drv); } -- cgit v1.2.3 From 2f102607ac77354b02a76cf2748598ce9f270f08 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Wed, 27 May 2009 23:59:58 -0400 Subject: i7300_idle: allow testing on i5000-series hardware w/o re-compile Testing the i7300_idle driver on i5000-series hardware required an edit to i7300_idle.h to "#define SUPPORT_I5000 1" and a re-build of both i7300_idle and ioat_dma. Replace that build-time scheme with a load-time module parameter: "7300_idle.forceload=1" to make it easier to test the driver on hardware that while not officially validated, works fine and is much more commonly available. By default (no modparam) the driver will continue to load only on the i7300. Note that ioat_dma runs a copy of i7300_idle's probe routine to know to reserve an IOAT channel for i7300_idle. This change makes ioat_dma do that always on the i5000, just like it does on the i7300. Signed-off-by: Len Brown Acked-by: Andrew Henroid --- drivers/dma/ioat_dma.c | 2 +- drivers/idle/i7300_idle.c | 6 +++++- 2 files changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c index 1955ee8d6d20..a600fc0f7962 100644 --- a/drivers/dma/ioat_dma.c +++ b/drivers/dma/ioat_dma.c @@ -173,7 +173,7 @@ static int ioat_dma_enumerate_channels(struct ioatdma_device *device) xfercap = (xfercap_scale == 0 ? -1 : (1UL << xfercap_scale)); #ifdef CONFIG_I7300_IDLE_IOAT_CHANNEL - if (i7300_idle_platform_probe(NULL, NULL) == 0) { + if (i7300_idle_platform_probe(NULL, NULL, 1) == 0) { device->common.chancnt--; } #endif diff --git a/drivers/idle/i7300_idle.c b/drivers/idle/i7300_idle.c index bf740394d704..949c97ff57e3 100644 --- a/drivers/idle/i7300_idle.c +++ b/drivers/idle/i7300_idle.c @@ -41,6 +41,10 @@ static int debug; module_param_named(debug, debug, uint, 0644); MODULE_PARM_DESC(debug, "Enable debug printks in this driver"); +static int forceload; +module_param_named(forceload, forceload, uint, 0644); +MODULE_PARM_DESC(debug, "Enable driver testing on unvalidated i5000"); + #define dprintk(fmt, arg...) \ do { if (debug) printk(KERN_INFO I7300_PRINT fmt, ##arg); } while (0) @@ -552,7 +556,7 @@ static int __init i7300_idle_init(void) cpus_clear(idle_cpumask); total_us = 0; - if (i7300_idle_platform_probe(&fbd_dev, &ioat_dev)) + if (i7300_idle_platform_probe(&fbd_dev, &ioat_dev, forceload)) return -ENODEV; if (i7300_idle_thrt_save()) -- cgit v1.2.3 From 10b6d95612672f89deb39b5a60fb677c78ba4844 Mon Sep 17 00:00:00 2001 From: Divy Le Ray Date: Thu, 28 May 2009 11:23:02 +0000 Subject: cxgb3: fix dma mapping regression Commit 5e68b772e6efd189d6aca76f6872fb75d51ace60 cxgb3: map entire Rx page, feed map+offset to Rx ring. introduced a regression on platforms defining DECLARE_PCI_UNMAP_ADDR() and related macros as no-ops. Rx descriptors are fed with the a page buffer bus address + page chunk offset. The page buffer bus address is set and retrieved through pci_unamp_addr_set(), pci_unmap_addr(). These functions being meaningless on x86 (if CONFIG_DMA_API_DEBUG is not set). The HW ends up with a bogus bus address. This patch saves the page buffer bus address for all plaftorms. Signed-off-by: Divy Le Ray Signed-off-by: David S. Miller --- drivers/net/cxgb3/adapter.h | 4 ++-- drivers/net/cxgb3/sge.c | 11 +++++------ 2 files changed, 7 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/cxgb3/adapter.h b/drivers/net/cxgb3/adapter.h index 714df2b675e6..c888e97c9671 100644 --- a/drivers/net/cxgb3/adapter.h +++ b/drivers/net/cxgb3/adapter.h @@ -85,8 +85,8 @@ struct fl_pg_chunk { struct page *page; void *va; unsigned int offset; - u64 *p_cnt; - DECLARE_PCI_UNMAP_ADDR(mapping); + unsigned long *p_cnt; + dma_addr_t mapping; }; struct rx_desc; diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c index 26d3587f3399..b3ee2bc1a005 100644 --- a/drivers/net/cxgb3/sge.c +++ b/drivers/net/cxgb3/sge.c @@ -355,7 +355,7 @@ static void clear_rx_desc(struct pci_dev *pdev, const struct sge_fl *q, (*d->pg_chunk.p_cnt)--; if (!*d->pg_chunk.p_cnt) pci_unmap_page(pdev, - pci_unmap_addr(&d->pg_chunk, mapping), + d->pg_chunk.mapping, q->alloc_size, PCI_DMA_FROMDEVICE); put_page(d->pg_chunk.page); @@ -454,7 +454,7 @@ static int alloc_pg_chunk(struct adapter *adapter, struct sge_fl *q, q->pg_chunk.offset = 0; mapping = pci_map_page(adapter->pdev, q->pg_chunk.page, 0, q->alloc_size, PCI_DMA_FROMDEVICE); - pci_unmap_addr_set(&q->pg_chunk, mapping, mapping); + q->pg_chunk.mapping = mapping; } sd->pg_chunk = q->pg_chunk; @@ -511,8 +511,7 @@ static int refill_fl(struct adapter *adap, struct sge_fl *q, int n, gfp_t gfp) nomem: q->alloc_failed++; break; } - mapping = pci_unmap_addr(&sd->pg_chunk, mapping) + - sd->pg_chunk.offset; + mapping = sd->pg_chunk.mapping + sd->pg_chunk.offset; pci_unmap_addr_set(sd, dma_addr, mapping); add_one_rx_chunk(mapping, d, q->gen); @@ -881,7 +880,7 @@ recycle: (*sd->pg_chunk.p_cnt)--; if (!*sd->pg_chunk.p_cnt) pci_unmap_page(adap->pdev, - pci_unmap_addr(&sd->pg_chunk, mapping), + sd->pg_chunk.mapping, fl->alloc_size, PCI_DMA_FROMDEVICE); if (!skb) { @@ -2096,7 +2095,7 @@ static void lro_add_page(struct adapter *adap, struct sge_qset *qs, (*sd->pg_chunk.p_cnt)--; if (!*sd->pg_chunk.p_cnt) pci_unmap_page(adap->pdev, - pci_unmap_addr(&sd->pg_chunk, mapping), + sd->pg_chunk.mapping, fl->alloc_size, PCI_DMA_FROMDEVICE); -- cgit v1.2.3 From c22c8149313ee85c912e7b77a7afd04be8b8cba8 Mon Sep 17 00:00:00 2001 From: Divy Le Ray Date: Thu, 28 May 2009 11:23:08 +0000 Subject: cxgb3: link fault fixes Do not call t3_link_fault() under spinlock, as it calls msleep(). Besides, only the access to pi->link_fault needs to be serialized. Also initialize local variables before checking the link status, link state fields might otherwise end up containing garbage. Signed-off-by: Divy Le Ray Signed-off-by: David S. Miller --- drivers/net/cxgb3/cxgb3_main.c | 8 +++++--- drivers/net/cxgb3/t3_hw.c | 5 +++++ 2 files changed, 10 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c index 7ea48414c6cb..17858b9a5830 100644 --- a/drivers/net/cxgb3/cxgb3_main.c +++ b/drivers/net/cxgb3/cxgb3_main.c @@ -2496,14 +2496,16 @@ static void check_link_status(struct adapter *adapter) for_each_port(adapter, i) { struct net_device *dev = adapter->port[i]; struct port_info *p = netdev_priv(dev); + int link_fault; spin_lock_irq(&adapter->work_lock); - if (p->link_fault) { + link_fault = p->link_fault; + spin_unlock_irq(&adapter->work_lock); + + if (link_fault) { t3_link_fault(adapter, i); - spin_unlock_irq(&adapter->work_lock); continue; } - spin_unlock_irq(&adapter->work_lock); if (!(p->phy.caps & SUPPORTED_IRQ) && netif_running(dev)) { t3_xgm_intr_disable(adapter, i); diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c index 4f68aeb2679a..4950d5d789ae 100644 --- a/drivers/net/cxgb3/t3_hw.c +++ b/drivers/net/cxgb3/t3_hw.c @@ -1274,6 +1274,11 @@ void t3_link_fault(struct adapter *adapter, int port_id) A_XGM_INT_STATUS + mac->offset); link_fault &= F_LINKFAULTCHANGE; + link_ok = lc->link_ok; + speed = lc->speed; + duplex = lc->duplex; + fc = lc->fc; + phy->ops->get_link_status(phy, &link_ok, &speed, &duplex, &fc); if (link_fault) { -- cgit v1.2.3 From 4e0168fa4842e27795a75b205a510f25b62181d9 Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Thu, 28 May 2009 02:05:53 +0000 Subject: mac8390: fix build with NET_POLL_CONTROLLER Fix the build for CONFIG_NET_POLL_CONTROLLER that I broke with 217cbfa856dc1cbc2890781626c4032d9e3ec59f ("mac8390: fix regression caused during net_device_ops conversion"). Signed-off-by: Finn Thain Signed-off-by: David S. Miller --- drivers/net/mac8390.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/mac8390.c b/drivers/net/mac8390.c index f26667d5eaae..22e74a0e0361 100644 --- a/drivers/net/mac8390.c +++ b/drivers/net/mac8390.c @@ -489,7 +489,7 @@ static const struct net_device_ops mac8390_netdev_ops = { .ndo_set_mac_address = eth_mac_addr, .ndo_change_mtu = eth_change_mtu, #ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = ei_poll, + .ndo_poll_controller = __ei_poll, #endif }; -- cgit v1.2.3 From 8541c1180a355c4da283fc6b03a92c0233823c1b Mon Sep 17 00:00:00 2001 From: Vladimir Barinov Date: Thu, 23 Apr 2009 15:47:22 +0400 Subject: mtd: MXC NAND driver fixes (v5) The following patch fixes: - re-initialization of host->col_addr which is used as byte index between the successive READID flash commands. - compile error when CONFIG_PM is enabled - pass on the error code from clk_get() - return -ENOMEM in case of failed ioremap() - pass on the return value of platform_driver_probe() directly - remove excessive printk - let command line partition table parsing with mxc_nand name. The cmd_line parsing is done via name that differs from mxc_nand by default and looks like "NAND 256MiB 1,8V 8-bit" Signed-off-by: Vladimir Barinov Signed-off-by: Lothar Wassmann Acked-by: Sascha Hauer Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/mxc_nand.c | 43 +++++++++++++++++++++++-------------------- 1 file changed, 23 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index f3548d048014..40c26080ecda 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -831,6 +831,7 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command, break; case NAND_CMD_READID: + host->col_addr = 0; send_read_id(host); break; @@ -867,6 +868,7 @@ static int __init mxcnd_probe(struct platform_device *pdev) mtd->priv = this; mtd->owner = THIS_MODULE; mtd->dev.parent = &pdev->dev; + mtd->name = "mxc_nand"; /* 50 us command delay time */ this->chip_delay = 5; @@ -882,8 +884,10 @@ static int __init mxcnd_probe(struct platform_device *pdev) this->verify_buf = mxc_nand_verify_buf; host->clk = clk_get(&pdev->dev, "nfc"); - if (IS_ERR(host->clk)) + if (IS_ERR(host->clk)) { + err = PTR_ERR(host->clk); goto eclk; + } clk_enable(host->clk); host->clk_act = 1; @@ -896,7 +900,7 @@ static int __init mxcnd_probe(struct platform_device *pdev) host->regs = ioremap(res->start, res->end - res->start + 1); if (!host->regs) { - err = -EIO; + err = -ENOMEM; goto eres; } @@ -1011,30 +1015,35 @@ static int __devexit mxcnd_remove(struct platform_device *pdev) #ifdef CONFIG_PM static int mxcnd_suspend(struct platform_device *pdev, pm_message_t state) { - struct mtd_info *info = platform_get_drvdata(pdev); + struct mtd_info *mtd = platform_get_drvdata(pdev); + struct nand_chip *nand_chip = mtd->priv; + struct mxc_nand_host *host = nand_chip->priv; int ret = 0; DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND suspend\n"); - if (info) - ret = info->suspend(info); - - /* Disable the NFC clock */ - clk_disable(nfc_clk); /* FIXME */ + if (mtd) { + ret = mtd->suspend(mtd); + /* Disable the NFC clock */ + clk_disable(host->clk); + } return ret; } static int mxcnd_resume(struct platform_device *pdev) { - struct mtd_info *info = platform_get_drvdata(pdev); + struct mtd_info *mtd = platform_get_drvdata(pdev); + struct nand_chip *nand_chip = mtd->priv; + struct mxc_nand_host *host = nand_chip->priv; int ret = 0; DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND resume\n"); - /* Enable the NFC clock */ - clk_enable(nfc_clk); /* FIXME */ - if (info) - info->resume(info); + if (mtd) { + /* Enable the NFC clock */ + clk_enable(host->clk); + mtd->resume(mtd); + } return ret; } @@ -1055,13 +1064,7 @@ static struct platform_driver mxcnd_driver = { static int __init mxc_nd_init(void) { - /* Register the device driver structure. */ - pr_info("MXC MTD nand Driver\n"); - if (platform_driver_probe(&mxcnd_driver, mxcnd_probe) != 0) { - printk(KERN_ERR "Driver register failed for mxcnd_driver\n"); - return -ENODEV; - } - return 0; + return platform_driver_probe(&mxcnd_driver, mxcnd_probe); } static void __exit mxc_nd_cleanup(void) -- cgit v1.2.3 From 21a4cc00e8e67edcfc1bdb9af6d370ed1226eb86 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Thu, 28 May 2009 11:39:02 +0200 Subject: at76c50x-usb: avoid mutex deadlock in at76_dwork_hw_scan http://bugzilla.kernel.org/show_bug.cgi?id=13312 at76_dwork_hw_scan holds a mutex while calling ieee80211_scan_completed, which then calls at76_config which needs the same mutex. This reworks the ordering to not hold the lock while calling ieee80211_scan_completed. Signed-off-by: John W. Linville --- drivers/net/wireless/at76c50x-usb.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/at76c50x-usb.c index 744f4f4dd3d1..8d93ca4651b9 100644 --- a/drivers/net/wireless/at76c50x-usb.c +++ b/drivers/net/wireless/at76c50x-usb.c @@ -1873,18 +1873,18 @@ static void at76_dwork_hw_scan(struct work_struct *work) if (ret != CMD_STATUS_COMPLETE) { queue_delayed_work(priv->hw->workqueue, &priv->dwork_hw_scan, SCAN_POLL_INTERVAL); - goto exit; + mutex_unlock(&priv->mtx); + return; } - ieee80211_scan_completed(priv->hw, false); - if (is_valid_ether_addr(priv->bssid)) at76_join(priv); - ieee80211_wake_queues(priv->hw); - -exit: mutex_unlock(&priv->mtx); + + ieee80211_scan_completed(priv->hw, false); + + ieee80211_wake_queues(priv->hw); } static int at76_hw_scan(struct ieee80211_hw *hw, -- cgit v1.2.3 From aeeab4ff06b8e29cfe2fe730ba626f7e2487ba03 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Wed, 27 May 2009 09:21:57 +0200 Subject: rtl8187: add USB ID for Linksys WUSB54GC-EU v2 USB wifi dongle http://bugzilla.kernel.org/show_bug.cgi?id=13383 Reported-by: Przemyslaw Kulczycki Signed-off-by: John W. Linville --- drivers/net/wireless/Kconfig | 1 + drivers/net/wireless/rtl818x/rtl8187_dev.c | 2 ++ 2 files changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 8a0823588c51..3d94e7dfea69 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -430,6 +430,7 @@ config RTL8187 ASUS P5B Deluxe Toshiba Satellite Pro series of laptops Asus Wireless Link + Linksys WUSB54GC-EU Thanks to Realtek for their support! diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c index bac6cfba6abd..d51ba0a88c23 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_dev.c +++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c @@ -71,6 +71,8 @@ static struct usb_device_id rtl8187_table[] __devinitdata = { {USB_DEVICE(0x18E8, 0x6232), .driver_info = DEVICE_RTL8187}, /* AirLive */ {USB_DEVICE(0x1b75, 0x8187), .driver_info = DEVICE_RTL8187}, + /* Linksys */ + {USB_DEVICE(0x1737, 0x0073), .driver_info = DEVICE_RTL8187B}, {} }; -- cgit v1.2.3 From b898f4f869da5b9d41f297fff87aca4cd42d80b3 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Thu, 28 May 2009 14:34:29 -0700 Subject: drivers/serial/mpc52xx_uart.c: fix array overindexing check The check for an overindexing of mpc52xx_uart_{ports,nodes} has an off-by-one. Signed-off-by: Roel Kluin Acked-by: Wolfram Sang Acked-by: Grant Likely Cc: Benjamin Herrenschmidt Cc: Alan Cox Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/mpc52xx_uart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c index 7f72f8ceaa6f..b3feb6198d57 100644 --- a/drivers/serial/mpc52xx_uart.c +++ b/drivers/serial/mpc52xx_uart.c @@ -988,7 +988,7 @@ mpc52xx_console_setup(struct console *co, char *options) pr_debug("mpc52xx_console_setup co=%p, co->index=%i, options=%s\n", co, co->index, options); - if ((co->index < 0) || (co->index > MPC52xx_PSC_MAXNUM)) { + if ((co->index < 0) || (co->index >= MPC52xx_PSC_MAXNUM)) { pr_debug("PSC%x out of range\n", co->index); return -EINVAL; } -- cgit v1.2.3 From b5d598b41aebee67bf95802b68b888e98a449687 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Thu, 28 May 2009 14:34:33 -0700 Subject: parport_gsc: fix printk format error drivers/parport/parport_gsc.c:356: warning: format '%lx' expects type 'long unsigned int', but argument 2 has type 'resource_size_t' [akpm@linux-foundation.org: fix it to handle u64's] Signed-off-by: Alexander Beregalov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/parport/parport_gsc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/parport/parport_gsc.c b/drivers/parport/parport_gsc.c index e6a7e847ee80..ea31a452b153 100644 --- a/drivers/parport/parport_gsc.c +++ b/drivers/parport/parport_gsc.c @@ -352,8 +352,8 @@ static int __devinit parport_init_chip(struct parisc_device *dev) unsigned long port; if (!dev->irq) { - printk(KERN_WARNING "IRQ not found for parallel device at 0x%lx\n", - dev->hpa.start); + printk(KERN_WARNING "IRQ not found for parallel device at 0x%llx\n", + (unsigned long long)dev->hpa.start); return -ENODEV; } -- cgit v1.2.3 From 8e8e8267f0a08c2415d5f51bc9a9fde6d5400619 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Thu, 28 May 2009 14:34:34 -0700 Subject: serial: 8250_gsc: fix printk format error drivers/serial/8250_gsc.c:44: warning: format '%lx' expects type 'long unsigned int', but argument 2 has type 'resource_size_t' [akpm@linux-foundation.org: fix it to handle u64's] Signed-off-by: Alexander Beregalov Cc: Alan Cox Cc: Kyle McMartin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/8250_gsc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/8250_gsc.c b/drivers/serial/8250_gsc.c index 418b4fe9a0a1..33149d982e82 100644 --- a/drivers/serial/8250_gsc.c +++ b/drivers/serial/8250_gsc.c @@ -39,9 +39,9 @@ static int __init serial_init_chip(struct parisc_device *dev) */ if (parisc_parent(dev)->id.hw_type != HPHW_IOA) printk(KERN_INFO - "Serial: device 0x%lx not configured.\n" + "Serial: device 0x%llx not configured.\n" "Enable support for Wax, Lasi, Asp or Dino.\n", - dev->hpa.start); + (unsigned long long)dev->hpa.start); return -ENODEV; } -- cgit v1.2.3 From 17663e59704bea838a9236f299104e30909a43b1 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Thu, 28 May 2009 14:34:35 -0700 Subject: S3C-fb: PM fix Correctly restore the FrameBuffer register state in the resume function. Reviewed-by: Kyungmin Park Signed-off-by: Marek Szyprowski Cc: Ben Dooks Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/s3c-fb.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c index 5e9c6302433b..d3a568e6b169 100644 --- a/drivers/video/s3c-fb.c +++ b/drivers/video/s3c-fb.c @@ -947,7 +947,8 @@ static int __devexit s3c_fb_remove(struct platform_device *pdev) int win; for (win = 0; win <= S3C_FB_MAX_WIN; win++) - s3c_fb_release_win(sfb, sfb->windows[win]); + if (sfb->windows[win]) + s3c_fb_release_win(sfb, sfb->windows[win]); iounmap(sfb->regs); @@ -985,11 +986,20 @@ static int s3c_fb_suspend(struct platform_device *pdev, pm_message_t state) static int s3c_fb_resume(struct platform_device *pdev) { struct s3c_fb *sfb = platform_get_drvdata(pdev); + struct s3c_fb_platdata *pd = sfb->pdata; struct s3c_fb_win *win; int win_no; clk_enable(sfb->bus_clk); + /* setup registers */ + writel(pd->vidcon1, sfb->regs + VIDCON1); + + /* zero all windows before we do anything */ + for (win_no = 0; win_no < S3C_FB_MAX_WIN; win_no++) + s3c_fb_clear_win(sfb, win_no); + + /* restore framebuffers */ for (win_no = 0; win_no < S3C_FB_MAX_WIN; win_no++) { win = sfb->windows[win_no]; if (!win) -- cgit v1.2.3 From 53b7479bbdaedcc7846c66fd608fe66f1b5aa35b Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Thu, 28 May 2009 14:34:36 -0700 Subject: atmel_lcdfb: correct fifo size for some products Remove wrong fifo size definition for some AT91 products. Due to a misunderstanding of some AT91 datasheets, a fifo size of 2048 (words) has been introduced by mistake. In fact, all products (AT91/AT32) are sharing the same fifo size of 512 words. Signed-off-by: Nicolas Ferre Cc: Andrew Victor Acked-by: Haavard Skinnemoen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/atmel_lcdfb.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index 9a577a800db5..2fb63f6ea2f1 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -29,14 +29,8 @@ /* configurable parameters */ #define ATMEL_LCDC_CVAL_DEFAULT 0xc8 -#define ATMEL_LCDC_DMA_BURST_LEN 8 - -#if defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91CAP9) || \ - defined(CONFIG_ARCH_AT91SAM9RL) -#define ATMEL_LCDC_FIFO_SIZE 2048 -#else -#define ATMEL_LCDC_FIFO_SIZE 512 -#endif +#define ATMEL_LCDC_DMA_BURST_LEN 8 /* words */ +#define ATMEL_LCDC_FIFO_SIZE 512 /* words */ #if defined(CONFIG_ARCH_AT91) #define ATMEL_LCDFB_FBINFO_DEFAULT (FBINFO_DEFAULT \ -- cgit v1.2.3 From 56ec0c7b88c6eb17733e5015f31302f6312511ed Mon Sep 17 00:00:00 2001 From: Harry Ciao Date: Thu, 28 May 2009 14:34:42 -0700 Subject: edac: AMD8111 & AMD8131 use dev_name() The "bus_id" member in the device structure has been obsolete, use dev_name() instead. Signed-off-by: Harry Ciao Cc: Doug Thompson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/edac/amd8111_edac.c | 4 ++-- drivers/edac/amd8131_edac.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/edac/amd8111_edac.c b/drivers/edac/amd8111_edac.c index 614692181120..2cb58ef743e0 100644 --- a/drivers/edac/amd8111_edac.c +++ b/drivers/edac/amd8111_edac.c @@ -389,7 +389,7 @@ static int amd8111_dev_probe(struct pci_dev *dev, dev_info->edac_dev->dev = &dev_info->dev->dev; dev_info->edac_dev->mod_name = AMD8111_EDAC_MOD_STR; dev_info->edac_dev->ctl_name = dev_info->ctl_name; - dev_info->edac_dev->dev_name = dev_info->dev->dev.bus_id; + dev_info->edac_dev->dev_name = dev_name(&dev_info->dev->dev); if (edac_op_state == EDAC_OPSTATE_POLL) dev_info->edac_dev->edac_check = dev_info->check; @@ -473,7 +473,7 @@ static int amd8111_pci_probe(struct pci_dev *dev, pci_info->edac_dev->dev = &pci_info->dev->dev; pci_info->edac_dev->mod_name = AMD8111_EDAC_MOD_STR; pci_info->edac_dev->ctl_name = pci_info->ctl_name; - pci_info->edac_dev->dev_name = pci_info->dev->dev.bus_id; + pci_info->edac_dev->dev_name = dev_name(&pci_info->dev->dev); if (edac_op_state == EDAC_OPSTATE_POLL) pci_info->edac_dev->edac_check = pci_info->check; diff --git a/drivers/edac/amd8131_edac.c b/drivers/edac/amd8131_edac.c index c083b31cac5a..b432d60c622a 100644 --- a/drivers/edac/amd8131_edac.c +++ b/drivers/edac/amd8131_edac.c @@ -287,7 +287,7 @@ static int amd8131_probe(struct pci_dev *dev, const struct pci_device_id *id) dev_info->edac_dev->dev = &dev_info->dev->dev; dev_info->edac_dev->mod_name = AMD8131_EDAC_MOD_STR; dev_info->edac_dev->ctl_name = dev_info->ctl_name; - dev_info->edac_dev->dev_name = dev_info->dev->dev.bus_id; + dev_info->edac_dev->dev_name = dev_name(&dev_info->dev->dev); if (edac_op_state == EDAC_OPSTATE_POLL) dev_info->edac_dev->edac_check = amd8131_chipset.check; -- cgit v1.2.3 From 715fe7af9fd7328af661742bfadc195e665a837f Mon Sep 17 00:00:00 2001 From: Harry Ciao Date: Thu, 28 May 2009 14:34:43 -0700 Subject: edac: AMD8111 & AMD8131 Kconfig fixup The amd8111_edac.c driver will fail allmodconfig on architectures other than PPC, introduce Kconfig dependency to avoid this, since both AMD8111 and AMD8131 chips are only adopted on Maple so far. Signed-off-by: Harry Ciao Cc: Doug Thompson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/edac/Kconfig | 8 ++++++-- drivers/edac/Makefile | 2 ++ 2 files changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig index e5f5c5a8ba6c..956982f8739b 100644 --- a/drivers/edac/Kconfig +++ b/drivers/edac/Kconfig @@ -192,16 +192,20 @@ config EDAC_PPC4XX config EDAC_AMD8131 tristate "AMD8131 HyperTransport PCI-X Tunnel" - depends on EDAC_MM_EDAC && PCI + depends on EDAC_MM_EDAC && PCI && PPC_MAPLE help Support for error detection and correction on the AMD8131 HyperTransport PCI-X Tunnel chip. + Note, add more Kconfig dependency if it's adopted + on some machine other than Maple. config EDAC_AMD8111 tristate "AMD8111 HyperTransport I/O Hub" - depends on EDAC_MM_EDAC && PCI + depends on EDAC_MM_EDAC && PCI && PPC_MAPLE help Support for error detection and correction on the AMD8111 HyperTransport I/O Hub chip. + Note, add more Kconfig dependency if it's adopted + on some machine other than Maple. endif # EDAC diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile index a5fdcf02f591..59076819135d 100644 --- a/drivers/edac/Makefile +++ b/drivers/edac/Makefile @@ -35,3 +35,5 @@ obj-$(CONFIG_EDAC_MPC85XX) += mpc85xx_edac.o obj-$(CONFIG_EDAC_MV64X60) += mv64x60_edac.o obj-$(CONFIG_EDAC_CELL) += cell_edac.o obj-$(CONFIG_EDAC_PPC4XX) += ppc4xx_edac.o +obj-$(CONFIG_EDAC_AMD8111) += amd8111_edac.o +obj-$(CONFIG_EDAC_AMD8131) += amd8131_edac.o -- cgit v1.2.3 From b8e7e40abeac49644fec4a4f52ffe74c7b05eca0 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 28 May 2009 14:01:35 +0100 Subject: 8250: Fix oops from setserial If you setserial a port which has never been initialised we change the type but don't update the I/O method pointers. The same problem is true if you change the io type of a port - but nobody ever does that so nobody noticed! Remember the old type and when attaching if the type has changed reload the port accessor pointers. We can't do it blindly as some 8250 drivers load custom accessors and we must not stomp those. Tested-by: Victor Seryodkin Closes-bug: #13367 Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/8250.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'drivers') diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index b4b39811b445..a0127e93ade0 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -137,6 +137,7 @@ struct uart_8250_port { unsigned char mcr; unsigned char mcr_mask; /* mask of user bits */ unsigned char mcr_force; /* mask of forced bits */ + unsigned char cur_iotype; /* Running I/O type */ /* * Some bits in registers are cleared on a read, so they must @@ -471,6 +472,7 @@ static void io_serial_out(struct uart_port *p, int offset, int value) static void set_io_from_upio(struct uart_port *p) { + struct uart_8250_port *up = (struct uart_8250_port *)p; switch (p->iotype) { case UPIO_HUB6: p->serial_in = hub6_serial_in; @@ -509,6 +511,8 @@ static void set_io_from_upio(struct uart_port *p) p->serial_out = io_serial_out; break; } + /* Remember loaded iotype */ + up->cur_iotype = p->iotype; } static void @@ -1937,6 +1941,9 @@ static int serial8250_startup(struct uart_port *port) up->capabilities = uart_config[up->port.type].flags; up->mcr = 0; + if (up->port.iotype != up->cur_iotype) + set_io_from_upio(port); + if (up->port.type == PORT_16C950) { /* Wake up and initialize UART */ up->acr = 0; @@ -2563,6 +2570,9 @@ static void serial8250_config_port(struct uart_port *port, int flags) if (ret < 0) probeflags &= ~PROBE_RSA; + if (up->port.iotype != up->cur_iotype) + set_io_from_upio(port); + if (flags & UART_CONFIG_TYPE) autoconfig(up, probeflags); if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ) @@ -2671,6 +2681,11 @@ serial8250_register_ports(struct uart_driver *drv, struct device *dev) { int i; + for (i = 0; i < nr_uarts; i++) { + struct uart_8250_port *up = &serial8250_ports[i]; + up->cur_iotype = 0xFF; + } + serial8250_isa_init_ports(); for (i = 0; i < nr_uarts; i++) { -- cgit v1.2.3 From 34d531e640cb805973cf656b15c716b961565cea Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 26 May 2009 15:11:06 -0400 Subject: ACPI: sanity check _PSS frequency to prevent cpufreq crash When BIOS SETUP is changed to disable EIST, some BIOS hand the OS an un-initialized _PSS: Name (_PSS, Package (0x06) { Package (0x06) { 0x80000000, // frequency [MHz] 0x80000000, // power [mW] 0x80000000, // latency [us] 0x80000000, // BM latency [us] 0x80000000, // control 0x80000000 // status }, ... These are outrageous values for frequency, power and latency, raising the question where to draw the line between legal and illegal. We tend to survive garbage in the power and latency fields, but we can BUG_ON when garbage is in the frequency field. Cpufreq multiplies the frequency by 1000 and stores it in a u32 KHz. So disregard a _PSS with a frequency so large that it can't be represented by cpufreq. https://bugzilla.redhat.com/show_bug.cgi?id=500311 Signed-off-by: Len Brown --- drivers/acpi/processor_perflib.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c index cafb41000f6b..60e543d3234e 100644 --- a/drivers/acpi/processor_perflib.c +++ b/drivers/acpi/processor_perflib.c @@ -309,9 +309,15 @@ static int acpi_processor_get_performance_states(struct acpi_processor *pr) (u32) px->bus_master_latency, (u32) px->control, (u32) px->status)); - if (!px->core_frequency) { - printk(KERN_ERR PREFIX - "Invalid _PSS data: freq is zero\n"); + /* + * Check that ACPI's u64 MHz will be valid as u32 KHz in cpufreq + */ + if (!px->core_frequency || + ((u32)(px->core_frequency * 1000) != + (px->core_frequency * 1000))) { + printk(KERN_ERR FW_BUG PREFIX + "Invalid BIOS _PSS frequency: 0x%llx MHz\n", + px->core_frequency); result = -EFAULT; kfree(pr->performance->states); goto end; -- cgit v1.2.3 From 34ac272b3aaef11a91e19a72f3ac5772a96ffbc5 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Tue, 26 May 2009 23:35:34 -0400 Subject: ACPI: video: DMI workaround broken eMachines E510 BIOS enabling display brightness http://bugzilla.kernel.org/show_bug.cgi?id=13376 Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/video.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 810cca90ca7f..ee45e7604221 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -570,6 +570,14 @@ static struct dmi_system_id video_dmi_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5710Z"), }, }, + { + .callback = video_set_bqc_offset, + .ident = "eMachines E510", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "EMACHINES"), + DMI_MATCH(DMI_PRODUCT_NAME, "eMachines E510"), + }, + }, {} }; -- cgit v1.2.3 From 93bcece20ef87c29548ec7e66532f1018572cea0 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Tue, 19 May 2009 15:08:41 -0400 Subject: ACPI: video: DMI workaround broken Acer 5315 BIOS enabling display brightness http://bugzilla.kernel.org/show_bug.cgi?id=13121 Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/video.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index ee45e7604221..6d897bbd3bd0 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -578,6 +578,14 @@ static struct dmi_system_id video_dmi_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_NAME, "eMachines E510"), }, }, + { + .callback = video_set_bqc_offset, + .ident = "Acer Aspire 5315", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5315"), + }, + }, {} }; -- cgit v1.2.3 From 1fc8d33acafe68bdcc21b327d22ef3820b819727 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Wed, 20 May 2009 11:56:08 +0530 Subject: drm/i915: acpi/video.c fix section mismatch warning Currently acpi_video_exit() is exported as well as using __exit which causes: WARNING: drivers/acpi/video.o(__ksymtab+0x0): Section mismatch in reference from the variable __ksymtab_acpi_video_exit to the function .exit.text:acpi_video_exit() The symbol acpi_video_exit is exported and annotated __exit Fix this by removing the __exit annotation of acpi_video_exit or drop the export. Signed-off-by: Jaswinder Singh Rajput Signed-off-by: Len Brown --- drivers/acpi/video.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 810cca90ca7f..a79b88535266 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -2334,7 +2334,7 @@ static int __init acpi_video_init(void) return acpi_video_register(); } -void __exit acpi_video_exit(void) +void acpi_video_exit(void) { acpi_bus_unregister_driver(&acpi_video_bus); -- cgit v1.2.3 From 21671b88be331fb9c95891d5ee7d2e940e6b024c Mon Sep 17 00:00:00 2001 From: Frans Pop Date: Fri, 22 May 2009 10:23:40 +0200 Subject: ACPI processor: remove spurious newline from warning message Commit 4973b22a ("ACPI processor: reset the throttling state once it's invalid") introduced a new warning which prints a spurious newline. The ACPI_WARNING macro that is used already takes care of adding a newline, after adding ACPI_CA_VERSION to the message. Remove the newline to avoid the message getting split into two lines. Signed-off-by: Frans Pop Signed-off-by: Len Brown --- drivers/acpi/processor_throttling.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index 7f16f5f8e7d3..227543789ba9 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -840,7 +840,7 @@ static int acpi_processor_get_throttling_ptc(struct acpi_processor *pr) state = acpi_get_throttling_state(pr, value); if (state == -1) { ACPI_WARNING((AE_INFO, - "Invalid throttling state, reset\n")); + "Invalid throttling state, reset")); state = 0; ret = acpi_processor_set_throttling(pr, state); if (ret) -- cgit v1.2.3 From 31db5645bda24682dadbc97d5e8a7918ade2a298 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 29 May 2009 21:11:27 -0400 Subject: ACPI, i915: build fix (v2) drivers/built-in.o: In function `intel_opregion_init': (.text+0x9d540): undefined reference to `acpi_video_register' v2: move under DRM_I915 from DRM_I915_KMS Signed-off-by: Len Brown Signed-off-by: Randy Dunlap --- drivers/gpu/drm/Kconfig | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 4cd35d8fd799..f5d46e7199d4 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -67,12 +67,18 @@ config DRM_I830 will load the correct one. config DRM_I915 + tristate "i915 driver" select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select FB select FRAMEBUFFER_CONSOLE if !EMBEDDED - tristate "i915 driver" + # i915 depends on ACPI_VIDEO when ACPI is enabled + # but for select to work, need to select ACPI_VIDEO's dependencies, ick + select VIDEO_OUTPUT_CONTROL if ACPI + select BACKLIGHT_CLASS_DEVICE if ACPI + select INPUT if ACPI + select ACPI_VIDEO if ACPI help Choose this option if you have a system that has Intel 830M, 845G, 852GM, 855GM 865G or 915G integrated graphics. If M is selected, the @@ -84,12 +90,6 @@ config DRM_I915 config DRM_I915_KMS bool "Enable modesetting on intel by default" depends on DRM_I915 - # i915 KMS depends on ACPI_VIDEO when ACPI is enabled - # but for select to work, need to select ACPI_VIDEO's dependencies, ick - select VIDEO_OUTPUT_CONTROL if ACPI - select BACKLIGHT_CLASS_DEVICE if ACPI - select INPUT if ACPI - select ACPI_VIDEO if ACPI help Choose this option if you want kernel modesetting enabled by default, and you have a new enough userspace to support this. Running old -- cgit v1.2.3 From 465440d2720543669841db5b0691ba41892ed0ae Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Mon, 25 May 2009 20:57:21 +0000 Subject: mlx4_en: Fix a kernel panic when waking tx queue When the transmit queue gets full we enable interrupts for TX completions There was a race that we handled the TX queue both from the interrupt context and from the transmit function. Using "spin_trylock_irq()" ensures this doesn't happen. Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller --- drivers/net/mlx4/en_tx.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/mlx4/en_tx.c b/drivers/net/mlx4/en_tx.c index ac6fc499b280..e5c98a98ad37 100644 --- a/drivers/net/mlx4/en_tx.c +++ b/drivers/net/mlx4/en_tx.c @@ -426,7 +426,7 @@ void mlx4_en_poll_tx_cq(unsigned long data) INC_PERF_COUNTER(priv->pstats.tx_poll); - if (!spin_trylock(&ring->comp_lock)) { + if (!spin_trylock_irq(&ring->comp_lock)) { mod_timer(&cq->timer, jiffies + MLX4_EN_TX_POLL_TIMEOUT); return; } @@ -439,7 +439,7 @@ void mlx4_en_poll_tx_cq(unsigned long data) if (inflight && priv->port_up) mod_timer(&cq->timer, jiffies + MLX4_EN_TX_POLL_TIMEOUT); - spin_unlock(&ring->comp_lock); + spin_unlock_irq(&ring->comp_lock); } static struct mlx4_en_tx_desc *mlx4_en_bounce_to_desc(struct mlx4_en_priv *priv, @@ -482,9 +482,9 @@ static inline void mlx4_en_xmit_poll(struct mlx4_en_priv *priv, int tx_ind) /* Poll the CQ every mlx4_en_TX_MODER_POLL packets */ if ((++ring->poll_cnt & (MLX4_EN_TX_POLL_MODER - 1)) == 0) - if (spin_trylock(&ring->comp_lock)) { + if (spin_trylock_irq(&ring->comp_lock)) { mlx4_en_process_tx_cq(priv->dev, cq); - spin_unlock(&ring->comp_lock); + spin_unlock_irq(&ring->comp_lock); } } -- cgit v1.2.3 From bdb0e010bf0061a73027cc84dd7ad192c663eca3 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 29 May 2009 22:04:54 -0700 Subject: ath1e: add new device id for asus hardware Gary Lin reports that a new device id needs to be added to the atl1e in order to get some new Asus hardware to work properly. Signed-off-by: Greg Kroah-Hartman Signed-off-by: David S. Miller --- drivers/net/atl1e/atl1e_main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/atl1e/atl1e_main.c b/drivers/net/atl1e/atl1e_main.c index fb57b750866b..1342418fb209 100644 --- a/drivers/net/atl1e/atl1e_main.c +++ b/drivers/net/atl1e/atl1e_main.c @@ -37,6 +37,7 @@ char atl1e_driver_version[] = DRV_VERSION; */ static struct pci_device_id atl1e_pci_tbl[] = { {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1E)}, + {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, 0x1066)}, /* required last entry */ { 0 } }; -- cgit v1.2.3 From c339dfdd65b52bfd947ab29d1210314a2f6d622d Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 30 May 2009 20:06:54 +0200 Subject: ide_pci_generic: add quirk for Netcell ATA RAID We need to explicitly mark words 85-87 as valid ones since firmware doesn't do it. This should fix support for LBA48 and FLUSH CACHE [EXT] command which stopped working after we applied more strict checking of identify words in: commit 942dcd85bf8edf38cdc3745306ca250684d99a61 ("ide: idedisk_supports_lba48() -> ata_id_lba48_enabled()") and commit 4b58f17d7c45a8e5f4acda641bec388398b9c0fa ("ide: ide_id_has_flush_cache() -> ata_id_flush_enabled()") Reported-and-tested-by: "Trevor Hemsley" Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-pci-generic.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers') diff --git a/drivers/ide/ide-pci-generic.c b/drivers/ide/ide-pci-generic.c index 61111fd27130..39d4e01f5c9c 100644 --- a/drivers/ide/ide-pci-generic.c +++ b/drivers/ide/ide-pci-generic.c @@ -33,6 +33,16 @@ static int ide_generic_all; /* Set to claim all devices */ module_param_named(all_generic_ide, ide_generic_all, bool, 0444); MODULE_PARM_DESC(all_generic_ide, "IDE generic will claim all unknown PCI IDE storage controllers."); +static void netcell_quirkproc(ide_drive_t *drive) +{ + /* mark words 85-87 as valid */ + drive->id[ATA_ID_CSF_DEFAULT] |= 0x4000; +} + +static const struct ide_port_ops netcell_port_ops = { + .quirkproc = netcell_quirkproc, +}; + #define DECLARE_GENERIC_PCI_DEV(extra_flags) \ { \ .name = DRV_NAME, \ @@ -74,6 +84,7 @@ static const struct ide_port_info generic_chipsets[] __devinitdata = { { /* 6: Revolution */ .name = DRV_NAME, + .port_ops = &netcell_port_ops, .host_flags = IDE_HFLAG_CLEAR_SIMPLEX | IDE_HFLAG_TRUST_BIOS_FOR_DMA | IDE_HFLAG_OFF_BOARD, -- cgit v1.2.3 From cf9f6e21c155d5add733b969c695837ead79eeab Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Mon, 1 Jun 2009 03:12:04 -0700 Subject: 3c509: Add missing EISA IDs Several EISA device IDs for 3c509 family network cards are missing from the driver, making the cards unusable in their EISA mode. Here's a fix to add them based on the EISA configuration files distributed by 3Com and our eisa.ids database. Signed-off-by: Maciej W. Rozycki Signed-off-by: David S. Miller --- drivers/net/3c509.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c index fbb371921991..682aad897081 100644 --- a/drivers/net/3c509.c +++ b/drivers/net/3c509.c @@ -480,9 +480,13 @@ static int pnp_registered; #ifdef CONFIG_EISA static struct eisa_device_id el3_eisa_ids[] = { + { "TCM5090" }, + { "TCM5091" }, { "TCM5092" }, { "TCM5093" }, + { "TCM5094" }, { "TCM5095" }, + { "TCM5098" }, { "" } }; MODULE_DEVICE_TABLE(eisa, el3_eisa_ids); -- cgit v1.2.3 From 39d8bbedb9571a89d638f5b05358f26ab503d7a6 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 1 Jun 2009 13:46:49 +0200 Subject: hwmon: (lm78) Add missing __devexit_p() The remove function uses __devexit, so the .remove assignment needs __devexit_p() to fix a build error with hotplug disabled. Signed-off-by: Mike Frysinger Signed-off-by: Jean Delvare --- drivers/hwmon/lm78.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c index b5e3b2851698..a1787fdf5b9f 100644 --- a/drivers/hwmon/lm78.c +++ b/drivers/hwmon/lm78.c @@ -182,7 +182,7 @@ static struct platform_driver lm78_isa_driver = { .name = "lm78", }, .probe = lm78_isa_probe, - .remove = lm78_isa_remove, + .remove = __devexit_p(lm78_isa_remove), }; -- cgit v1.2.3