From 862f0982eadcea0e114576c57ea426d3d51a69a6 Mon Sep 17 00:00:00 2001
From: Shawn Guo <shawn.guo@freescale.com>
Date: Wed, 5 Jan 2011 21:13:09 +0000
Subject: net/fec: fix MMFR_OP type in fec_enet_mdio_write

FEC_MMFR_OP_WRITE should be used than FEC_MMFR_OP_READ in
a mdio write operation.

It's probably a typo introduced by commit:

e6b043d512fa8d9a3801bf5d72bfa3b8fc3b3cc8
netdev/fec.c: add phylib supporting to enable carrier detection (v2)

Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/fec.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index cce32d43175f..52e9ca8de4b2 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -651,8 +651,8 @@ static int fec_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
 	fep->mii_timeout = 0;
 	init_completion(&fep->mdio_done);
 
-	/* start a read op */
-	writel(FEC_MMFR_ST | FEC_MMFR_OP_READ |
+	/* start a write op */
+	writel(FEC_MMFR_ST | FEC_MMFR_OP_WRITE |
 		FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(regnum) |
 		FEC_MMFR_TA | FEC_MMFR_DATA(value),
 		fep->hwp + FEC_MII_DATA);
-- 
cgit v1.2.3


From 8649a230e33320b00f778a6f7c17a2764e844730 Mon Sep 17 00:00:00 2001
From: Shawn Guo <shawn.guo@freescale.com>
Date: Wed, 5 Jan 2011 21:13:10 +0000
Subject: net/fec: remove the use of "index" which is legacy

The "index" becomes legacy since fep->pdev->id starts working
to identify the instance.

Moreover, the call of fec_enet_init(ndev, 0) always passes 0
to fep->index. This makes the following code in fec_get_mac buggy.

	/* Adjust MAC if using default MAC address */
	if (iap == fec_mac_default)
		dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index;

It may be the time to remove "index" and use fep->pdev->id instead.

Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/fec.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index 52e9ca8de4b2..47f6b3b91423 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -186,7 +186,6 @@ struct fec_enet_private {
 	int     mii_timeout;
 	uint    phy_speed;
 	phy_interface_t	phy_interface;
-	int	index;
 	int	link;
 	int	full_duplex;
 	struct	completion mdio_done;
@@ -566,7 +565,7 @@ static void __inline__ fec_get_mac(struct net_device *dev)
 
 	/* Adjust MAC if using default MAC address */
 	if (iap == fec_mac_default)
-		 dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index;
+		 dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->pdev->id;
 }
 #endif
 
@@ -1067,9 +1066,8 @@ static const struct net_device_ops fec_netdev_ops = {
  /*
   * XXX:  We need to clean up on failure exits here.
   *
-  * index is only used in legacy code
   */
-static int fec_enet_init(struct net_device *dev, int index)
+static int fec_enet_init(struct net_device *dev)
 {
 	struct fec_enet_private *fep = netdev_priv(dev);
 	struct bufdesc *cbd_base;
@@ -1086,7 +1084,6 @@ static int fec_enet_init(struct net_device *dev, int index)
 
 	spin_lock_init(&fep->hw_lock);
 
-	fep->index = index;
 	fep->hwp = (void __iomem *)dev->base_addr;
 	fep->netdev = dev;
 
@@ -1316,7 +1313,7 @@ fec_probe(struct platform_device *pdev)
 	}
 	clk_enable(fep->clk);
 
-	ret = fec_enet_init(ndev, 0);
+	ret = fec_enet_init(ndev);
 	if (ret)
 		goto failed_init;
 
-- 
cgit v1.2.3


From 49da97dcb6b00a6869bbc3fa6ec7fdfd8a6e41a3 Mon Sep 17 00:00:00 2001
From: Shawn Guo <shawn.guo@freescale.com>
Date: Wed, 5 Jan 2011 21:13:11 +0000
Subject: net/fec: add mac field into platform data and consolidate fec_get_mac

Add mac field into fec_platform_data and consolidate function
fec_get_mac to get mac address in following order.

 1) module parameter via kernel command line fec.macaddr=0x00,0x04,...
 2) from flash in case of CONFIG_M5272 or fec_platform_data mac
    field for others, which typically have mac stored in fuse
 3) fec mac address registers set by bootloader

Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/fec.c | 81 ++++++++++++++++++++++++++-----------------------------
 1 file changed, 38 insertions(+), 43 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index 47f6b3b91423..47a3c7b499e9 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -59,15 +59,11 @@
 #define FEC_ALIGNMENT	0x3
 #endif
 
-/*
- * Define the fixed address of the FEC hardware.
- */
-#if defined(CONFIG_M5272)
-
-static unsigned char	fec_mac_default[] = {
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-};
+static unsigned char macaddr[ETH_ALEN];
+module_param_array(macaddr, byte, NULL, 0);
+MODULE_PARM_DESC(macaddr, "FEC Ethernet MAC address");
 
+#if defined(CONFIG_M5272)
 /*
  * Some hardware gets it MAC address out of local flash memory.
  * if this is non-zero then assume it is the address to get MAC from.
@@ -537,37 +533,50 @@ rx_processing_done:
 }
 
 /* ------------------------------------------------------------------------- */
-#ifdef CONFIG_M5272
 static void __inline__ fec_get_mac(struct net_device *dev)
 {
 	struct fec_enet_private *fep = netdev_priv(dev);
+	struct fec_platform_data *pdata = fep->pdev->dev.platform_data;
 	unsigned char *iap, tmpaddr[ETH_ALEN];
 
-	if (FEC_FLASHMAC) {
-		/*
-		 * Get MAC address from FLASH.
-		 * If it is all 1's or 0's, use the default.
-		 */
-		iap = (unsigned char *)FEC_FLASHMAC;
-		if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) &&
-		    (iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0))
-			iap = fec_mac_default;
-		if ((iap[0] == 0xff) && (iap[1] == 0xff) && (iap[2] == 0xff) &&
-		    (iap[3] == 0xff) && (iap[4] == 0xff) && (iap[5] == 0xff))
-			iap = fec_mac_default;
-	} else {
-		*((unsigned long *) &tmpaddr[0]) = readl(fep->hwp + FEC_ADDR_LOW);
-		*((unsigned short *) &tmpaddr[4]) = (readl(fep->hwp + FEC_ADDR_HIGH) >> 16);
+	/*
+	 * try to get mac address in following order:
+	 *
+	 * 1) module parameter via kernel command line in form
+	 *    fec.macaddr=0x00,0x04,0x9f,0x01,0x30,0xe0
+	 */
+	iap = macaddr;
+
+	/*
+	 * 2) from flash or fuse (via platform data)
+	 */
+	if (!is_valid_ether_addr(iap)) {
+#ifdef CONFIG_M5272
+		if (FEC_FLASHMAC)
+			iap = (unsigned char *)FEC_FLASHMAC;
+#else
+		if (pdata)
+			memcpy(iap, pdata->mac, ETH_ALEN);
+#endif
+	}
+
+	/*
+	 * 3) FEC mac registers set by bootloader
+	 */
+	if (!is_valid_ether_addr(iap)) {
+		*((unsigned long *) &tmpaddr[0]) =
+			be32_to_cpu(readl(fep->hwp + FEC_ADDR_LOW));
+		*((unsigned short *) &tmpaddr[4]) =
+			be16_to_cpu(readl(fep->hwp + FEC_ADDR_HIGH) >> 16);
 		iap = &tmpaddr[0];
 	}
 
 	memcpy(dev->dev_addr, iap, ETH_ALEN);
 
-	/* Adjust MAC if using default MAC address */
-	if (iap == fec_mac_default)
-		 dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->pdev->id;
+	/* Adjust MAC if using macaddr */
+	if (iap == macaddr)
+		 dev->dev_addr[ETH_ALEN-1] = macaddr[ETH_ALEN-1] + fep->pdev->id;
 }
-#endif
 
 /* ------------------------------------------------------------------------- */
 
@@ -1087,22 +1096,8 @@ static int fec_enet_init(struct net_device *dev)
 	fep->hwp = (void __iomem *)dev->base_addr;
 	fep->netdev = dev;
 
-	/* Set the Ethernet address */
-#ifdef CONFIG_M5272
+	/* Get the Ethernet address */
 	fec_get_mac(dev);
-#else
-	{
-		unsigned long l;
-		l = readl(fep->hwp + FEC_ADDR_LOW);
-		dev->dev_addr[0] = (unsigned char)((l & 0xFF000000) >> 24);
-		dev->dev_addr[1] = (unsigned char)((l & 0x00FF0000) >> 16);
-		dev->dev_addr[2] = (unsigned char)((l & 0x0000FF00) >> 8);
-		dev->dev_addr[3] = (unsigned char)((l & 0x000000FF) >> 0);
-		l = readl(fep->hwp + FEC_ADDR_HIGH);
-		dev->dev_addr[4] = (unsigned char)((l & 0xFF000000) >> 24);
-		dev->dev_addr[5] = (unsigned char)((l & 0x00FF0000) >> 16);
-	}
-#endif
 
 	/* Set receive and transmit descriptor base. */
 	fep->rx_bd_base = cbd_base;
-- 
cgit v1.2.3


From bcc67771ed8ee31cc1f2b1e033ae822b40c72ff9 Mon Sep 17 00:00:00 2001
From: Shawn Guo <shawn.guo@freescale.com>
Date: Wed, 5 Jan 2011 21:13:12 +0000
Subject: net/fec: improve pm for better suspend/resume

The following commit made a fix to use fec_enet_open/fec_enet_close
over fec_enet_init/fec_stop for suspend/resume, because fec_enet_init
does not allow to have a working network interface at resume.

  e3fe8558c7fc182972c3d947d88744482111f304
  net/fec: fix pm to survive to suspend/resume

This fix works for i.mx/mxc fec controller, but fails on mx28 fec
which gets a different interrupt logic design. On i.mx fec, interrupt
can be triggered even bit ETHER_EN of ECR register is not set. But
on mx28 fec, ETHER_EN must be set to get interrupt work. Meanwhile,
MII interrupt is mandatory to resume the driver, because MDIO
read/write changed to interrupt mode by commit below.

  97b72e4320a9aaa4a7f1592ee7d2da7e2c9bd349
  fec: use interrupt for MDIO completion indication

fec_restart/fec_stop comes out as the solution working for both
cases.

Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/fec.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index 47a3c7b499e9..8a1c51f86414 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -1372,8 +1372,10 @@ fec_suspend(struct device *dev)
 
 	if (ndev) {
 		fep = netdev_priv(ndev);
-		if (netif_running(ndev))
-			fec_enet_close(ndev);
+		if (netif_running(ndev)) {
+			fec_stop(ndev);
+			netif_device_detach(ndev);
+		}
 		clk_disable(fep->clk);
 	}
 	return 0;
@@ -1388,8 +1390,10 @@ fec_resume(struct device *dev)
 	if (ndev) {
 		fep = netdev_priv(ndev);
 		clk_enable(fep->clk);
-		if (netif_running(ndev))
-			fec_enet_open(ndev);
+		if (netif_running(ndev)) {
+			fec_restart(ndev, fep->full_duplex);
+			netif_device_attach(ndev);
+		}
 	}
 	return 0;
 }
-- 
cgit v1.2.3


From b5680e0b591f2701c5ba7d5fc8f96b55414073c8 Mon Sep 17 00:00:00 2001
From: Shawn Guo <shawn.guo@freescale.com>
Date: Wed, 5 Jan 2011 21:13:13 +0000
Subject: net/fec: add dual fec support for mx28

This patch is to add mx28 dual fec support. Here are some key notes
for mx28 fec controller.

 - The mx28 fec controller naming ENET-MAC is a different IP from FEC
   used on other i.mx variants.  But they are basically compatible
   on software interface, so it's possible to share the same driver.
 - ENET-MAC design on mx28 made an improper assumption that it runs
   on a big-endian system. As the result, driver has to swap every
   frame going to and coming from the controller.
 - The external phys can only be configured by fec0, which means fec1
   can not work independently and both phys need to be configured by
   mii_bus attached on fec0.
 - ENET-MAC reset will get mac address registers reset too.
 - ENET-MAC MII/RMII mode and 10M/100M speed are configured
   differently FEC.
 - ETHER_EN bit must be set to get ENET-MAC interrupt work.

Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/Kconfig |   7 +--
 drivers/net/fec.c   | 148 ++++++++++++++++++++++++++++++++++++++++++++++------
 drivers/net/fec.h   |   5 +-
 3 files changed, 139 insertions(+), 21 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 3fda24a28d2f..5780dad6a3cb 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1944,18 +1944,19 @@ config 68360_ENET
 config FEC
 	bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
 	depends on M523x || M527x || M5272 || M528x || M520x || M532x || \
-		MACH_MX27 || ARCH_MX35 || ARCH_MX25 || ARCH_MX5
+		MACH_MX27 || ARCH_MX35 || ARCH_MX25 || ARCH_MX5 || SOC_IMX28
 	select PHYLIB
 	help
 	  Say Y here if you want to use the built-in 10/100 Fast ethernet
 	  controller on some Motorola ColdFire and Freescale i.MX processors.
 
 config FEC2
-	bool "Second FEC ethernet controller (on some ColdFire CPUs)"
+	bool "Second FEC ethernet controller"
 	depends on FEC
 	help
 	  Say Y here if you want to use the second built-in 10/100 Fast
-	  ethernet controller on some Motorola ColdFire processors.
+	  ethernet controller on some Motorola ColdFire and Freescale
+	  i.MX processors.
 
 config FEC_MPC52xx
 	tristate "MPC52xx FEC driver"
diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index 8a1c51f86414..2a71373719ae 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -17,6 +17,8 @@
  *
  * Bug fixes and cleanup by Philippe De Muyter (phdm@macqel.be)
  * Copyright (c) 2004-2006 Macq Electronique SA.
+ *
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
  */
 
 #include <linux/module.h>
@@ -45,20 +47,36 @@
 
 #include <asm/cacheflush.h>
 
-#ifndef CONFIG_ARCH_MXC
+#ifndef CONFIG_ARM
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #endif
 
 #include "fec.h"
 
-#ifdef CONFIG_ARCH_MXC
-#include <mach/hardware.h>
+#if defined(CONFIG_ARCH_MXC) || defined(CONFIG_SOC_IMX28)
 #define FEC_ALIGNMENT	0xf
 #else
 #define FEC_ALIGNMENT	0x3
 #endif
 
+#define DRIVER_NAME	"fec"
+
+/* Controller is ENET-MAC */
+#define FEC_QUIRK_ENET_MAC		(1 << 0)
+/* Controller needs driver to swap frame */
+#define FEC_QUIRK_SWAP_FRAME		(1 << 1)
+
+static struct platform_device_id fec_devtype[] = {
+	{
+		.name = DRIVER_NAME,
+		.driver_data = 0,
+	}, {
+		.name = "imx28-fec",
+		.driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_SWAP_FRAME,
+	}
+};
+
 static unsigned char macaddr[ETH_ALEN];
 module_param_array(macaddr, byte, NULL, 0);
 MODULE_PARM_DESC(macaddr, "FEC Ethernet MAC address");
@@ -129,7 +147,8 @@ MODULE_PARM_DESC(macaddr, "FEC Ethernet MAC address");
  * account when setting it.
  */
 #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
-    defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_ARCH_MXC)
+    defined(CONFIG_M520x) || defined(CONFIG_M532x) || \
+    defined(CONFIG_ARCH_MXC) || defined(CONFIG_SOC_IMX28)
 #define	OPT_FRAME_SIZE	(PKT_MAXBUF_SIZE << 16)
 #else
 #define	OPT_FRAME_SIZE	0
@@ -208,10 +227,23 @@ static void fec_stop(struct net_device *dev);
 /* Transmitter timeout */
 #define TX_TIMEOUT (2 * HZ)
 
+static void *swap_buffer(void *bufaddr, int len)
+{
+	int i;
+	unsigned int *buf = bufaddr;
+
+	for (i = 0; i < (len + 3) / 4; i++, buf++)
+		*buf = cpu_to_be32(*buf);
+
+	return bufaddr;
+}
+
 static netdev_tx_t
 fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct fec_enet_private *fep = netdev_priv(dev);
+	const struct platform_device_id *id_entry =
+				platform_get_device_id(fep->pdev);
 	struct bufdesc *bdp;
 	void *bufaddr;
 	unsigned short	status;
@@ -256,6 +288,14 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		bufaddr = fep->tx_bounce[index];
 	}
 
+	/*
+	 * Some design made an incorrect assumption on endian mode of
+	 * the system that it's running on. As the result, driver has to
+	 * swap every frame going to and coming from the controller.
+	 */
+	if (id_entry->driver_data & FEC_QUIRK_SWAP_FRAME)
+		swap_buffer(bufaddr, skb->len);
+
 	/* Save skb pointer */
 	fep->tx_skbuff[fep->skb_cur] = skb;
 
@@ -424,6 +464,8 @@ static void
 fec_enet_rx(struct net_device *dev)
 {
 	struct	fec_enet_private *fep = netdev_priv(dev);
+	const struct platform_device_id *id_entry =
+				platform_get_device_id(fep->pdev);
 	struct bufdesc *bdp;
 	unsigned short status;
 	struct	sk_buff	*skb;
@@ -487,6 +529,9 @@ fec_enet_rx(struct net_device *dev)
 	        dma_unmap_single(NULL, bdp->cbd_bufaddr, bdp->cbd_datlen,
         			DMA_FROM_DEVICE);
 
+		if (id_entry->driver_data & FEC_QUIRK_SWAP_FRAME)
+			swap_buffer(data, pkt_len);
+
 		/* This does 16 byte alignment, exactly what we need.
 		 * The packet length includes FCS, but we don't want to
 		 * include that when passing upstream as it messes up
@@ -689,6 +734,7 @@ static int fec_enet_mii_probe(struct net_device *dev)
 	char mdio_bus_id[MII_BUS_ID_SIZE];
 	char phy_name[MII_BUS_ID_SIZE + 3];
 	int phy_id;
+	int dev_id = fep->pdev->id;
 
 	fep->phy_dev = NULL;
 
@@ -700,6 +746,8 @@ static int fec_enet_mii_probe(struct net_device *dev)
 			continue;
 		if (fep->mii_bus->phy_map[phy_id]->phy_id == 0)
 			continue;
+		if (dev_id--)
+			continue;
 		strncpy(mdio_bus_id, fep->mii_bus->id, MII_BUS_ID_SIZE);
 		break;
 	}
@@ -737,10 +785,35 @@ static int fec_enet_mii_probe(struct net_device *dev)
 
 static int fec_enet_mii_init(struct platform_device *pdev)
 {
+	static struct mii_bus *fec0_mii_bus;
 	struct net_device *dev = platform_get_drvdata(pdev);
 	struct fec_enet_private *fep = netdev_priv(dev);
+	const struct platform_device_id *id_entry =
+				platform_get_device_id(fep->pdev);
 	int err = -ENXIO, i;
 
+	/*
+	 * The dual fec interfaces are not equivalent with enet-mac.
+	 * Here are the differences:
+	 *
+	 *  - fec0 supports MII & RMII modes while fec1 only supports RMII
+	 *  - fec0 acts as the 1588 time master while fec1 is slave
+	 *  - external phys can only be configured by fec0
+	 *
+	 * That is to say fec1 can not work independently. It only works
+	 * when fec0 is working. The reason behind this design is that the
+	 * second interface is added primarily for Switch mode.
+	 *
+	 * Because of the last point above, both phys are attached on fec0
+	 * mdio interface in board design, and need to be configured by
+	 * fec0 mii_bus.
+	 */
+	if ((id_entry->driver_data & FEC_QUIRK_ENET_MAC) && pdev->id) {
+		/* fec1 uses fec0 mii_bus */
+		fep->mii_bus = fec0_mii_bus;
+		return 0;
+	}
+
 	fep->mii_timeout = 0;
 
 	/*
@@ -777,6 +850,10 @@ static int fec_enet_mii_init(struct platform_device *pdev)
 	if (mdiobus_register(fep->mii_bus))
 		goto err_out_free_mdio_irq;
 
+	/* save fec0 mii_bus */
+	if (id_entry->driver_data & FEC_QUIRK_ENET_MAC)
+		fec0_mii_bus = fep->mii_bus;
+
 	return 0;
 
 err_out_free_mdio_irq:
@@ -1148,12 +1225,25 @@ static void
 fec_restart(struct net_device *dev, int duplex)
 {
 	struct fec_enet_private *fep = netdev_priv(dev);
+	const struct platform_device_id *id_entry =
+				platform_get_device_id(fep->pdev);
 	int i;
+	u32 val, temp_mac[2];
 
 	/* Whack a reset.  We should wait for this. */
 	writel(1, fep->hwp + FEC_ECNTRL);
 	udelay(10);
 
+	/*
+	 * enet-mac reset will reset mac address registers too,
+	 * so need to reconfigure it.
+	 */
+	if (id_entry->driver_data & FEC_QUIRK_ENET_MAC) {
+		memcpy(&temp_mac, dev->dev_addr, ETH_ALEN);
+		writel(cpu_to_be32(temp_mac[0]), fep->hwp + FEC_ADDR_LOW);
+		writel(cpu_to_be32(temp_mac[1]), fep->hwp + FEC_ADDR_HIGH);
+	}
+
 	/* Clear any outstanding interrupt. */
 	writel(0xffc00000, fep->hwp + FEC_IEVENT);
 
@@ -1200,20 +1290,45 @@ fec_restart(struct net_device *dev, int duplex)
 	/* Set MII speed */
 	writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
 
-#ifdef FEC_MIIGSK_ENR
-	if (fep->phy_interface == PHY_INTERFACE_MODE_RMII) {
-		/* disable the gasket and wait */
-		writel(0, fep->hwp + FEC_MIIGSK_ENR);
-		while (readl(fep->hwp + FEC_MIIGSK_ENR) & 4)
-			udelay(1);
+	/*
+	 * The phy interface and speed need to get configured
+	 * differently on enet-mac.
+	 */
+	if (id_entry->driver_data & FEC_QUIRK_ENET_MAC) {
+		val = readl(fep->hwp + FEC_R_CNTRL);
 
-		/* configure the gasket: RMII, 50 MHz, no loopback, no echo */
-		writel(1, fep->hwp + FEC_MIIGSK_CFGR);
+		/* MII or RMII */
+		if (fep->phy_interface == PHY_INTERFACE_MODE_RMII)
+			val |= (1 << 8);
+		else
+			val &= ~(1 << 8);
 
-		/* re-enable the gasket */
-		writel(2, fep->hwp + FEC_MIIGSK_ENR);
-	}
+		/* 10M or 100M */
+		if (fep->phy_dev && fep->phy_dev->speed == SPEED_100)
+			val &= ~(1 << 9);
+		else
+			val |= (1 << 9);
+
+		writel(val, fep->hwp + FEC_R_CNTRL);
+	} else {
+#ifdef FEC_MIIGSK_ENR
+		if (fep->phy_interface == PHY_INTERFACE_MODE_RMII) {
+			/* disable the gasket and wait */
+			writel(0, fep->hwp + FEC_MIIGSK_ENR);
+			while (readl(fep->hwp + FEC_MIIGSK_ENR) & 4)
+				udelay(1);
+
+			/*
+			 * configure the gasket:
+			 *   RMII, 50 MHz, no loopback, no echo
+			 */
+			writel(1, fep->hwp + FEC_MIIGSK_CFGR);
+
+			/* re-enable the gasket */
+			writel(2, fep->hwp + FEC_MIIGSK_ENR);
+		}
 #endif
+	}
 
 	/* And last, enable the transmit and receive processing */
 	writel(2, fep->hwp + FEC_ECNTRL);
@@ -1410,12 +1525,13 @@ static const struct dev_pm_ops fec_pm_ops = {
 
 static struct platform_driver fec_driver = {
 	.driver	= {
-		.name	= "fec",
+		.name	= DRIVER_NAME,
 		.owner	= THIS_MODULE,
 #ifdef CONFIG_PM
 		.pm	= &fec_pm_ops,
 #endif
 	},
+	.id_table = fec_devtype,
 	.probe	= fec_probe,
 	.remove	= __devexit_p(fec_drv_remove),
 };
diff --git a/drivers/net/fec.h b/drivers/net/fec.h
index 2c48b25668d5..ace318df4c8d 100644
--- a/drivers/net/fec.h
+++ b/drivers/net/fec.h
@@ -14,7 +14,8 @@
 /****************************************************************************/
 
 #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
-    defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_ARCH_MXC)
+    defined(CONFIG_M520x) || defined(CONFIG_M532x) || \
+    defined(CONFIG_ARCH_MXC) || defined(CONFIG_SOC_IMX28)
 /*
  *	Just figures, Motorola would have to change the offsets for
  *	registers in the same peripheral device on different models
@@ -78,7 +79,7 @@
 /*
  *	Define the buffer descriptor structure.
  */
-#ifdef CONFIG_ARCH_MXC
+#if defined(CONFIG_ARCH_MXC) || defined(CONFIG_SOC_IMX28)
 struct bufdesc {
 	unsigned short cbd_datlen;	/* Data length */
 	unsigned short cbd_sc;	/* Control and status info */
-- 
cgit v1.2.3


From 26877c794407855f65c056d7914b2e72ae9b93b8 Mon Sep 17 00:00:00 2001
From: Jesper Juhl <jj@chaosbits.net>
Date: Thu, 6 Jan 2011 10:50:29 +0000
Subject: hamradio: Resolve memory leak due to missing firmware release in
 add_mcs()

Failure to release_firmware() in drivers/net/hamradio/yam.c::add_mcs()
causes memory leak.
This patch should fix it.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/hamradio/yam.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/hamradio/yam.c b/drivers/net/hamradio/yam.c
index 4e7d1d0a2340..7d9ced0738c5 100644
--- a/drivers/net/hamradio/yam.c
+++ b/drivers/net/hamradio/yam.c
@@ -396,7 +396,7 @@ static unsigned char *add_mcs(unsigned char *bits, int bitrate,
 	while (p) {
 		if (p->bitrate == bitrate) {
 			memcpy(p->bits, bits, YAM_FPGA_SIZE);
-			return p->bits;
+			goto out;
 		}
 		p = p->next;
 	}
@@ -411,7 +411,7 @@ static unsigned char *add_mcs(unsigned char *bits, int bitrate,
 	p->bitrate = bitrate;
 	p->next = yam_data;
 	yam_data = p;
-
+ out:
 	release_firmware(fw);
 	return p->bits;
 }
-- 
cgit v1.2.3


From 6a75da4a1a1d220fc3e32b816e83c258617505c5 Mon Sep 17 00:00:00 2001
From: Jesper Juhl <jj@chaosbits.net>
Date: Sun, 9 Jan 2011 11:32:38 +0000
Subject: Madge Ambassador ATM Adapter driver: Always release_firmware() in
 ucode_init() and don't leak memory.

Failure to call release_firmware() will result in memory leak in
drivers/atm/ambassador.c::ucode_init().
This patch makes sure we always call release_firmware() when needed,
thus removing the leak(s).

Yes, I know checkpatch complains about this patch, but it was either that
or completely mess up the existing style, so I opted to use the existing
style and live with the checkpatch related flak.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/atm/ambassador.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

(limited to 'drivers')

diff --git a/drivers/atm/ambassador.c b/drivers/atm/ambassador.c
index ffe9b655292e..9f47e8625266 100644
--- a/drivers/atm/ambassador.c
+++ b/drivers/atm/ambassador.c
@@ -1926,8 +1926,9 @@ static int __devinit ucode_init (loader_block * lb, amb_dev * dev) {
   const struct firmware *fw;
   unsigned long start_address;
   const struct ihex_binrec *rec;
+  const char *errmsg = 0;
   int res;
-  
+
   res = request_ihex_firmware(&fw, "atmsar11.fw", &dev->pci_dev->dev);
   if (res) {
     PRINTK (KERN_ERR, "Cannot load microcode data");
@@ -1937,8 +1938,8 @@ static int __devinit ucode_init (loader_block * lb, amb_dev * dev) {
   /* First record contains just the start address */
   rec = (const struct ihex_binrec *)fw->data;
   if (be16_to_cpu(rec->len) != sizeof(__be32) || be32_to_cpu(rec->addr)) {
-    PRINTK (KERN_ERR, "Bad microcode data (no start record)");
-    return -EINVAL;
+    errmsg = "no start record";
+    goto fail;
   }
   start_address = be32_to_cpup((__be32 *)rec->data);
 
@@ -1950,12 +1951,12 @@ static int __devinit ucode_init (loader_block * lb, amb_dev * dev) {
     PRINTD (DBG_LOAD, "starting region (%x, %u)", be32_to_cpu(rec->addr),
 	    be16_to_cpu(rec->len));
     if (be16_to_cpu(rec->len) > 4 * MAX_TRANSFER_DATA) {
-	    PRINTK (KERN_ERR, "Bad microcode data (record too long)");
-	    return -EINVAL;
+	    errmsg = "record too long";
+	    goto fail;
     }
     if (be16_to_cpu(rec->len) & 3) {
-	    PRINTK (KERN_ERR, "Bad microcode data (odd number of bytes)");
-	    return -EINVAL;
+	    errmsg = "odd number of bytes";
+	    goto fail;
     }
     res = loader_write(lb, dev, rec);
     if (res)
@@ -1970,6 +1971,10 @@ static int __devinit ucode_init (loader_block * lb, amb_dev * dev) {
     res = loader_start(lb, dev, start_address);
 
   return res;
+fail:
+  release_firmware(fw);
+  PRINTK(KERN_ERR, "Bad microcode data (%s)", errmsg);
+  return -EINVAL;
 }
 
 /********** give adapter parameters **********/
-- 
cgit v1.2.3


From 0744db2394ff1ee908169e38ab9308163c4cede5 Mon Sep 17 00:00:00 2001
From: Vladislav Zolotarov <vladz@broadcom.com>
Date: Sun, 9 Jan 2011 02:19:40 +0000
Subject: bnx2x: Don't prevent RSS configuration in INT#x and MSI interrupt
 modes.

Don't prevent RSS configuration in INT#x and MSI interrupt modes. Otherwise
Rx hash key won't be available.

Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x/bnx2x_main.c | 7 -------
 1 file changed, 7 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c
index 489a5512a04d..3866468aeb04 100644
--- a/drivers/net/bnx2x/bnx2x_main.c
+++ b/drivers/net/bnx2x/bnx2x_main.c
@@ -8751,13 +8751,6 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp)
 		dev_err(&bp->pdev->dev, "MCP disabled, "
 					"must load devices in order!\n");
 
-	/* Set multi queue mode */
-	if ((multi_mode != ETH_RSS_MODE_DISABLED) &&
-	    ((int_mode == INT_MODE_INTx) || (int_mode == INT_MODE_MSI))) {
-		dev_err(&bp->pdev->dev, "Multi disabled since int_mode "
-					"requested is not MSI-X\n");
-		multi_mode = ETH_RSS_MODE_DISABLED;
-	}
 	bp->multi_mode = multi_mode;
 	bp->int_mode = int_mode;
 
-- 
cgit v1.2.3


From 4a33bc03ab66631e844080bf1189d2afd7aae929 Mon Sep 17 00:00:00 2001
From: Vladislav Zolotarov <vladz@broadcom.com>
Date: Sun, 9 Jan 2011 02:20:04 +0000
Subject: bnx2x: registers dump fixes

Fixes in registers dump:
        - Properly calculate dump length for 57712.
        - Prevent HW blocks parity attentions when dumping registers in order to
prevent false parity errors handling.
        - Update the bnx2x_dump.h file: old one had a few bugs that could cause
fatal HW error as a result of a registers dump.

Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x/bnx2x.h         |   1 +
 drivers/net/bnx2x/bnx2x_dump.h    | 988 ++++++++++++++++++++++----------------
 drivers/net/bnx2x/bnx2x_ethtool.c |  22 +-
 drivers/net/bnx2x/bnx2x_init.h    | 220 +++++++++
 drivers/net/bnx2x/bnx2x_main.c    |  57 +--
 drivers/net/bnx2x/bnx2x_reg.h     |  74 +++
 6 files changed, 891 insertions(+), 471 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/bnx2x/bnx2x.h
index 77d6c8d6d86b..6a858a29db56 100644
--- a/drivers/net/bnx2x/bnx2x.h
+++ b/drivers/net/bnx2x/bnx2x.h
@@ -636,6 +636,7 @@ struct bnx2x_common {
 
 #define CHIP_METAL(bp)			(bp->common.chip_id & 0x00000ff0)
 #define CHIP_BOND_ID(bp)		(bp->common.chip_id & 0x0000000f)
+#define CHIP_PARITY_ENABLED(bp)	(CHIP_IS_E1(bp) || CHIP_IS_E1H(bp))
 
 	int			flash_size;
 #define NVRAM_1MB_SIZE			0x20000	/* 1M bit in bytes */
diff --git a/drivers/net/bnx2x/bnx2x_dump.h b/drivers/net/bnx2x/bnx2x_dump.h
index dc18c25ca9e5..fb3ff7c4d7ca 100644
--- a/drivers/net/bnx2x/bnx2x_dump.h
+++ b/drivers/net/bnx2x/bnx2x_dump.h
@@ -1,10 +1,16 @@
 /* bnx2x_dump.h: Broadcom Everest network driver.
  *
- * Copyright (c) 2009 Broadcom Corporation
+ * Copyright (c) 2011 Broadcom Corporation
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation.
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2, available
+ * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a
+ * license other than the GPL, without Broadcom's express prior written
+ * consent.
  */
 
 
@@ -17,53 +23,53 @@
 #define BNX2X_DUMP_H
 
 
-struct dump_sign {
-	u32 time_stamp;
-	u32 diag_ver;
-	u32 grc_dump_ver;
-};
 
-#define TSTORM_WAITP_ADDR		0x1b8a80
-#define CSTORM_WAITP_ADDR		0x238a80
-#define XSTORM_WAITP_ADDR		0x2b8a80
-#define USTORM_WAITP_ADDR		0x338a80
-#define TSTORM_CAM_MODE			0x1b1440
+/*definitions */
+#define XSTORM_WAITP_ADDR    0x2b8a80
+#define TSTORM_WAITP_ADDR    0x1b8a80
+#define USTORM_WAITP_ADDR    0x338a80
+#define CSTORM_WAITP_ADDR    0x238a80
+#define TSTORM_CAM_MODE         0x1B1440
 
-#define RI_E1				0x1
-#define RI_E1H				0x2
+#define MAX_TIMER_PENDING      200
+#define TIMER_SCAN_DONT_CARE   0xFF
+#define RI_E1			0x1
+#define RI_E1H			0x2
 #define RI_E2			0x4
-#define RI_ONLINE			0x100
+#define RI_ONLINE		0x100
 #define RI_PATH0_DUMP		0x200
 #define RI_PATH1_DUMP		0x400
-#define RI_E1_OFFLINE			(RI_E1)
-#define RI_E1_ONLINE			(RI_E1 | RI_ONLINE)
-#define RI_E1H_OFFLINE			(RI_E1H)
-#define RI_E1H_ONLINE			(RI_E1H | RI_ONLINE)
-#define RI_E2_OFFLINE			(RI_E2)
-#define RI_E2_ONLINE			(RI_E2 | RI_ONLINE)
-#define RI_E1E1H_OFFLINE		(RI_E1 | RI_E1H)
-#define RI_E1E1H_ONLINE			(RI_E1 | RI_E1H | RI_ONLINE)
-#define RI_E1HE2_OFFLINE		(RI_E2 | RI_E1H)
-#define RI_E1HE2_ONLINE			(RI_E2 | RI_E1H | RI_ONLINE)
-#define RI_E1E2_OFFLINE			(RI_E2 | RI_E1)
-#define RI_E1E2_ONLINE			(RI_E2 | RI_E1 | RI_ONLINE)
-#define RI_ALL_OFFLINE			(RI_E1 | RI_E1H | RI_E2)
-#define RI_ALL_ONLINE			(RI_E1 | RI_E1H | RI_E2 | RI_ONLINE)
-
-#define MAX_TIMER_PENDING		200
-#define TIMER_SCAN_DONT_CARE		0xFF
+#define RI_E1_OFFLINE		(RI_E1)
+#define RI_E1_ONLINE		(RI_E1 | RI_ONLINE)
+#define RI_E1H_OFFLINE		(RI_E1H)
+#define RI_E1H_ONLINE		(RI_E1H | RI_ONLINE)
+#define RI_E2_OFFLINE		(RI_E2)
+#define RI_E2_ONLINE		(RI_E2 | RI_ONLINE)
+#define RI_E1E1H_OFFLINE	(RI_E1 | RI_E1H)
+#define RI_E1E1H_ONLINE		(RI_E1 | RI_E1H | RI_ONLINE)
+#define RI_E1HE2_OFFLINE	(RI_E2 | RI_E1H)
+#define RI_E1HE2_ONLINE		(RI_E2 | RI_E1H | RI_ONLINE)
+#define RI_E1E2_OFFLINE		(RI_E2 | RI_E1)
+#define RI_E1E2_ONLINE		(RI_E2 | RI_E1 | RI_ONLINE)
+#define RI_ALL_OFFLINE         (RI_E1 | RI_E1H | RI_E2)
+#define RI_ALL_ONLINE          (RI_E1 | RI_E1H | RI_E2 | RI_ONLINE)
 
+struct dump_sign {
+	u32 time_stamp;
+	u32 diag_ver;
+	u32 grc_dump_ver;
+};
 
 struct dump_hdr {
-	u32		 hdr_size;	/* in dwords, excluding this field */
-	struct dump_sign dump_sign;
-	u32		 xstorm_waitp;
-	u32		 tstorm_waitp;
-	u32		 ustorm_waitp;
-	u32		 cstorm_waitp;
-	u16		 info;
-	u8		 idle_chk;
-	u8		 reserved;
+	u32  hdr_size;	/* in dwords, excluding this field */
+	struct dump_sign	dump_sign;
+	u32  xstorm_waitp;
+	u32  tstorm_waitp;
+	u32  ustorm_waitp;
+	u32  cstorm_waitp;
+	u16  info;
+	u8   idle_chk;
+	u8   reserved;
 };
 
 struct reg_addr {
@@ -80,202 +86,185 @@ struct wreg_addr {
 	u16 info;
 };
 
-
-#define REGS_COUNT			558
+#define REGS_COUNT			834
 static const struct reg_addr reg_addrs[REGS_COUNT] = {
 	{ 0x2000, 341, RI_ALL_ONLINE }, { 0x2800, 103, RI_ALL_ONLINE },
 	{ 0x3000, 287, RI_ALL_ONLINE }, { 0x3800, 331, RI_ALL_ONLINE },
-	{ 0x8800, 6, RI_E1_ONLINE }, { 0xa000, 223, RI_ALL_ONLINE },
-	{ 0xa388, 1, RI_ALL_ONLINE }, { 0xa398, 1, RI_ALL_ONLINE },
-	{ 0xa39c, 7, RI_E1H_ONLINE }, { 0xa3c0, 3, RI_E1H_ONLINE },
-	{ 0xa3d0, 1, RI_E1H_ONLINE }, { 0xa3d8, 1, RI_E1H_ONLINE },
-	{ 0xa3e0, 1, RI_E1H_ONLINE }, { 0xa3e8, 1, RI_E1H_ONLINE },
-	{ 0xa3f0, 1, RI_E1H_ONLINE }, { 0xa3f8, 1, RI_E1H_ONLINE },
-	{ 0xa400, 69, RI_ALL_ONLINE }, { 0xa518, 1, RI_ALL_ONLINE },
-	{ 0xa520, 1, RI_ALL_ONLINE }, { 0xa528, 1, RI_ALL_ONLINE },
-	{ 0xa530, 1, RI_ALL_ONLINE }, { 0xa538, 1, RI_ALL_ONLINE },
-	{ 0xa540, 1, RI_ALL_ONLINE }, { 0xa548, 1, RI_ALL_ONLINE },
-	{ 0xa550, 1, RI_ALL_ONLINE }, { 0xa558, 1, RI_ALL_ONLINE },
-	{ 0xa560, 1, RI_ALL_ONLINE }, { 0xa568, 1, RI_ALL_ONLINE },
-	{ 0xa570, 1, RI_ALL_ONLINE }, { 0xa580, 1, RI_ALL_ONLINE },
-	{ 0xa590, 1, RI_ALL_ONLINE }, { 0xa5a0, 1, RI_ALL_ONLINE },
-	{ 0xa5c0, 1, RI_ALL_ONLINE }, { 0xa5e0, 1, RI_E1H_ONLINE },
-	{ 0xa5e8, 1, RI_E1H_ONLINE }, { 0xa5f0, 1, RI_E1H_ONLINE },
-	{ 0xa5f8, 10, RI_E1H_ONLINE }, { 0x10000, 236, RI_ALL_ONLINE },
-	{ 0x103bc, 1, RI_ALL_ONLINE }, { 0x103cc, 1, RI_ALL_ONLINE },
-	{ 0x103dc, 1, RI_ALL_ONLINE }, { 0x10400, 57, RI_ALL_ONLINE },
-	{ 0x104e8, 2, RI_ALL_ONLINE }, { 0x104f4, 2, RI_ALL_ONLINE },
-	{ 0x10500, 146, RI_ALL_ONLINE }, { 0x10750, 2, RI_ALL_ONLINE },
-	{ 0x10760, 2, RI_ALL_ONLINE }, { 0x10770, 2, RI_ALL_ONLINE },
-	{ 0x10780, 2, RI_ALL_ONLINE }, { 0x10790, 2, RI_ALL_ONLINE },
-	{ 0x107a0, 2, RI_ALL_ONLINE }, { 0x107b0, 2, RI_ALL_ONLINE },
-	{ 0x107c0, 2, RI_ALL_ONLINE }, { 0x107d0, 2, RI_ALL_ONLINE },
-	{ 0x107e0, 2, RI_ALL_ONLINE }, { 0x10880, 2, RI_ALL_ONLINE },
-	{ 0x10900, 2, RI_ALL_ONLINE }, { 0x12000, 1, RI_ALL_ONLINE },
-	{ 0x14000, 1, RI_ALL_ONLINE }, { 0x16000, 26, RI_E1H_ONLINE },
-	{ 0x16070, 18, RI_E1H_ONLINE }, { 0x160c0, 27, RI_E1H_ONLINE },
-	{ 0x16140, 1, RI_E1H_ONLINE }, { 0x16160, 1, RI_E1H_ONLINE },
-	{ 0x16180, 2, RI_E1H_ONLINE }, { 0x161c0, 2, RI_E1H_ONLINE },
-	{ 0x16204, 5, RI_E1H_ONLINE }, { 0x18000, 1, RI_E1H_ONLINE },
-	{ 0x18008, 1, RI_E1H_ONLINE }, { 0x20000, 24, RI_ALL_ONLINE },
-	{ 0x20060, 8, RI_ALL_ONLINE }, { 0x20080, 138, RI_ALL_ONLINE },
-	{ 0x202b4, 1, RI_ALL_ONLINE }, { 0x202c4, 1, RI_ALL_ONLINE },
-	{ 0x20400, 2, RI_ALL_ONLINE }, { 0x2040c, 8, RI_ALL_ONLINE },
-	{ 0x2042c, 18, RI_E1H_ONLINE }, { 0x20480, 1, RI_ALL_ONLINE },
-	{ 0x20500, 1, RI_ALL_ONLINE }, { 0x20600, 1, RI_ALL_ONLINE },
-	{ 0x28000, 1, RI_ALL_ONLINE }, { 0x28004, 8191, RI_ALL_OFFLINE },
-	{ 0x30000, 1, RI_ALL_ONLINE }, { 0x30004, 16383, RI_ALL_OFFLINE },
-	{ 0x40000, 98, RI_ALL_ONLINE }, { 0x40194, 1, RI_ALL_ONLINE },
-	{ 0x401a4, 1, RI_ALL_ONLINE }, { 0x401a8, 11, RI_E1H_ONLINE },
-	{ 0x40200, 4, RI_ALL_ONLINE }, { 0x40400, 43, RI_ALL_ONLINE },
-	{ 0x404b8, 1, RI_ALL_ONLINE }, { 0x404c8, 1, RI_ALL_ONLINE },
-	{ 0x404cc, 3, RI_E1H_ONLINE }, { 0x40500, 2, RI_ALL_ONLINE },
+	{ 0x8800, 6, RI_ALL_ONLINE }, { 0x8818, 1, RI_E1HE2_ONLINE },
+	{ 0x9000, 164, RI_E2_ONLINE }, { 0x9400, 33, RI_E2_ONLINE },
+	{ 0xa000, 27, RI_ALL_ONLINE }, { 0xa06c, 1, RI_E1E1H_ONLINE },
+	{ 0xa070, 71, RI_ALL_ONLINE }, { 0xa18c, 4, RI_E1E1H_ONLINE },
+	{ 0xa19c, 62, RI_ALL_ONLINE }, { 0xa294, 2, RI_E1E1H_ONLINE },
+	{ 0xa29c, 56, RI_ALL_ONLINE }, { 0xa39c, 7, RI_E1HE2_ONLINE },
+	{ 0xa3c0, 3, RI_E1HE2_ONLINE }, { 0xa3d0, 1, RI_E1HE2_ONLINE },
+	{ 0xa3d8, 1, RI_E1HE2_ONLINE }, { 0xa3e0, 1, RI_E1HE2_ONLINE },
+	{ 0xa3e8, 1, RI_E1HE2_ONLINE }, { 0xa3f0, 1, RI_E1HE2_ONLINE },
+	{ 0xa3f8, 1, RI_E1HE2_ONLINE }, { 0xa400, 43, RI_ALL_ONLINE },
+	{ 0xa4ac, 2, RI_E1E1H_ONLINE }, { 0xa4b4, 1, RI_ALL_ONLINE },
+	{ 0xa4b8, 2, RI_E1E1H_ONLINE }, { 0xa4c0, 3, RI_ALL_ONLINE },
+	{ 0xa4cc, 5, RI_E1E1H_ONLINE }, { 0xa4e0, 9, RI_ALL_ONLINE },
+	{ 0xa504, 1, RI_E1E1H_ONLINE }, { 0xa508, 3, RI_ALL_ONLINE },
+	{ 0xa518, 1, RI_ALL_ONLINE }, { 0xa520, 1, RI_ALL_ONLINE },
+	{ 0xa528, 1, RI_ALL_ONLINE }, { 0xa530, 1, RI_ALL_ONLINE },
+	{ 0xa538, 1, RI_ALL_ONLINE }, { 0xa540, 1, RI_ALL_ONLINE },
+	{ 0xa548, 1, RI_E1E1H_ONLINE }, { 0xa550, 1, RI_E1E1H_ONLINE },
+	{ 0xa558, 1, RI_E1E1H_ONLINE }, { 0xa560, 1, RI_E1E1H_ONLINE },
+	{ 0xa568, 1, RI_E1E1H_ONLINE }, { 0xa570, 1, RI_ALL_ONLINE },
+	{ 0xa580, 1, RI_ALL_ONLINE }, { 0xa590, 1, RI_ALL_ONLINE },
+	{ 0xa5a0, 1, RI_ALL_ONLINE }, { 0xa5c0, 1, RI_ALL_ONLINE },
+	{ 0xa5e0, 1, RI_E1HE2_ONLINE }, { 0xa5e8, 1, RI_E1HE2_ONLINE },
+	{ 0xa5f0, 1, RI_E1HE2_ONLINE }, { 0xa5f8, 10, RI_E1HE2_ONLINE },
+	{ 0xa620, 111, RI_E2_ONLINE }, { 0xa800, 51, RI_E2_ONLINE },
+	{ 0xa8d4, 4, RI_E2_ONLINE }, { 0xa8e8, 1, RI_E2_ONLINE },
+	{ 0xa8f0, 1, RI_E2_ONLINE }, { 0x10000, 236, RI_ALL_ONLINE },
+	{ 0x10400, 57, RI_ALL_ONLINE }, { 0x104e8, 2, RI_ALL_ONLINE },
+	{ 0x104f4, 2, RI_ALL_ONLINE }, { 0x10500, 146, RI_ALL_ONLINE },
+	{ 0x10750, 2, RI_ALL_ONLINE }, { 0x10760, 2, RI_ALL_ONLINE },
+	{ 0x10770, 2, RI_ALL_ONLINE }, { 0x10780, 2, RI_ALL_ONLINE },
+	{ 0x10790, 2, RI_ALL_ONLINE }, { 0x107a0, 2, RI_ALL_ONLINE },
+	{ 0x107b0, 2, RI_ALL_ONLINE }, { 0x107c0, 2, RI_ALL_ONLINE },
+	{ 0x107d0, 2, RI_ALL_ONLINE }, { 0x107e0, 2, RI_ALL_ONLINE },
+	{ 0x10880, 2, RI_ALL_ONLINE }, { 0x10900, 2, RI_ALL_ONLINE },
+	{ 0x16000, 26, RI_E1HE2_ONLINE }, { 0x16070, 18, RI_E1HE2_ONLINE },
+	{ 0x160c0, 27, RI_E1HE2_ONLINE }, { 0x16140, 1, RI_E1HE2_ONLINE },
+	{ 0x16160, 1, RI_E1HE2_ONLINE }, { 0x16180, 2, RI_E1HE2_ONLINE },
+	{ 0x161c0, 2, RI_E1HE2_ONLINE }, { 0x16204, 5, RI_E1HE2_ONLINE },
+	{ 0x18000, 1, RI_E1HE2_ONLINE }, { 0x18008, 1, RI_E1HE2_ONLINE },
+	{ 0x18010, 35, RI_E2_ONLINE }, { 0x180a4, 2, RI_E2_ONLINE },
+	{ 0x180c0, 191, RI_E2_ONLINE }, { 0x18440, 1, RI_E2_ONLINE },
+	{ 0x18460, 1, RI_E2_ONLINE }, { 0x18480, 2, RI_E2_ONLINE },
+	{ 0x184c0, 2, RI_E2_ONLINE }, { 0x18500, 15, RI_E2_ONLINE },
+	{ 0x20000, 24, RI_ALL_ONLINE }, { 0x20060, 8, RI_ALL_ONLINE },
+	{ 0x20080, 94, RI_ALL_ONLINE }, { 0x201f8, 1, RI_E1E1H_ONLINE },
+	{ 0x201fc, 1, RI_ALL_ONLINE }, { 0x20200, 1, RI_E1E1H_ONLINE },
+	{ 0x20204, 1, RI_ALL_ONLINE }, { 0x20208, 1, RI_E1E1H_ONLINE },
+	{ 0x2020c, 39, RI_ALL_ONLINE }, { 0x202c8, 1, RI_E2_ONLINE },
+	{ 0x202d8, 4, RI_E2_ONLINE }, { 0x20400, 2, RI_ALL_ONLINE },
+	{ 0x2040c, 8, RI_ALL_ONLINE }, { 0x2042c, 18, RI_E1HE2_ONLINE },
+	{ 0x20480, 1, RI_ALL_ONLINE }, { 0x20500, 1, RI_ALL_ONLINE },
+	{ 0x20600, 1, RI_ALL_ONLINE }, { 0x28000, 1, RI_ALL_ONLINE },
+	{ 0x28004, 8191, RI_ALL_OFFLINE }, { 0x30000, 1, RI_ALL_ONLINE },
+	{ 0x30004, 16383, RI_ALL_OFFLINE }, { 0x40000, 98, RI_ALL_ONLINE },
+	{ 0x401a8, 8, RI_E1HE2_ONLINE }, { 0x401c8, 1, RI_E1H_ONLINE },
+	{ 0x401cc, 2, RI_E1HE2_ONLINE }, { 0x401d4, 2, RI_E2_ONLINE },
+	{ 0x40200, 4, RI_ALL_ONLINE }, { 0x40220, 18, RI_E2_ONLINE },
+	{ 0x40400, 43, RI_ALL_ONLINE }, { 0x404cc, 3, RI_E1HE2_ONLINE },
+	{ 0x404e0, 1, RI_E2_ONLINE }, { 0x40500, 2, RI_ALL_ONLINE },
 	{ 0x40510, 2, RI_ALL_ONLINE }, { 0x40520, 2, RI_ALL_ONLINE },
 	{ 0x40530, 2, RI_ALL_ONLINE }, { 0x40540, 2, RI_ALL_ONLINE },
-	{ 0x42000, 164, RI_ALL_ONLINE }, { 0x4229c, 1, RI_ALL_ONLINE },
-	{ 0x422ac, 1, RI_ALL_ONLINE }, { 0x422bc, 1, RI_ALL_ONLINE },
-	{ 0x422d4, 5, RI_E1H_ONLINE }, { 0x42400, 49, RI_ALL_ONLINE },
-	{ 0x424c8, 38, RI_ALL_ONLINE }, { 0x42568, 2, RI_ALL_ONLINE },
-	{ 0x42800, 1, RI_ALL_ONLINE }, { 0x50000, 20, RI_ALL_ONLINE },
-	{ 0x50050, 8, RI_ALL_ONLINE }, { 0x50070, 88, RI_ALL_ONLINE },
-	{ 0x501dc, 1, RI_ALL_ONLINE }, { 0x501ec, 1, RI_ALL_ONLINE },
-	{ 0x501f0, 4, RI_E1H_ONLINE }, { 0x50200, 2, RI_ALL_ONLINE },
-	{ 0x5020c, 7, RI_ALL_ONLINE }, { 0x50228, 6, RI_E1H_ONLINE },
-	{ 0x50240, 1, RI_ALL_ONLINE }, { 0x50280, 1, RI_ALL_ONLINE },
+	{ 0x40550, 10, RI_E2_ONLINE }, { 0x40610, 2, RI_E2_ONLINE },
+	{ 0x42000, 164, RI_ALL_ONLINE }, { 0x422c0, 4, RI_E2_ONLINE },
+	{ 0x422d4, 5, RI_E1HE2_ONLINE }, { 0x422e8, 1, RI_E2_ONLINE },
+	{ 0x42400, 49, RI_ALL_ONLINE }, { 0x424c8, 38, RI_ALL_ONLINE },
+	{ 0x42568, 2, RI_ALL_ONLINE }, { 0x42640, 5, RI_E2_ONLINE },
+	{ 0x42800, 1, RI_ALL_ONLINE }, { 0x50000, 1, RI_ALL_ONLINE },
+	{ 0x50004, 19, RI_ALL_ONLINE }, { 0x50050, 8, RI_ALL_ONLINE },
+	{ 0x50070, 88, RI_ALL_ONLINE }, { 0x501f0, 4, RI_E1HE2_ONLINE },
+	{ 0x50200, 2, RI_ALL_ONLINE }, { 0x5020c, 7, RI_ALL_ONLINE },
+	{ 0x50228, 6, RI_E1HE2_ONLINE }, { 0x50240, 1, RI_ALL_ONLINE },
+	{ 0x50280, 1, RI_ALL_ONLINE }, { 0x50300, 1, RI_E2_ONLINE },
+	{ 0x5030c, 1, RI_E2_ONLINE }, { 0x50318, 1, RI_E2_ONLINE },
+	{ 0x5031c, 1, RI_E2_ONLINE }, { 0x50320, 2, RI_E2_ONLINE },
 	{ 0x52000, 1, RI_ALL_ONLINE }, { 0x54000, 1, RI_ALL_ONLINE },
 	{ 0x54004, 3327, RI_ALL_OFFLINE }, { 0x58000, 1, RI_ALL_ONLINE },
-	{ 0x58004, 8191, RI_ALL_OFFLINE }, { 0x60000, 71, RI_ALL_ONLINE },
-	{ 0x60128, 1, RI_ALL_ONLINE }, { 0x60138, 1, RI_ALL_ONLINE },
-	{ 0x6013c, 24, RI_E1H_ONLINE }, { 0x60200, 1, RI_ALL_ONLINE },
+	{ 0x58004, 8191, RI_E1E1H_OFFLINE }, { 0x60000, 26, RI_ALL_ONLINE },
+	{ 0x60068, 8, RI_E1E1H_ONLINE }, { 0x60088, 12, RI_ALL_ONLINE },
+	{ 0x600b8, 9, RI_E1E1H_ONLINE }, { 0x600dc, 1, RI_ALL_ONLINE },
+	{ 0x600e0, 5, RI_E1E1H_ONLINE }, { 0x600f4, 1, RI_ALL_ONLINE },
+	{ 0x600f8, 1, RI_E1E1H_ONLINE }, { 0x600fc, 8, RI_ALL_ONLINE },
+	{ 0x6013c, 24, RI_E1H_ONLINE }, { 0x6019c, 2, RI_E2_ONLINE },
+	{ 0x601ac, 18, RI_E2_ONLINE }, { 0x60200, 1, RI_ALL_ONLINE },
+	{ 0x60204, 2, RI_ALL_OFFLINE }, { 0x60210, 13, RI_E2_ONLINE },
 	{ 0x61000, 1, RI_ALL_ONLINE }, { 0x61004, 511, RI_ALL_OFFLINE },
-	{ 0x70000, 8, RI_ALL_ONLINE }, { 0x70020, 21496, RI_ALL_OFFLINE },
-	{ 0x85000, 3, RI_ALL_ONLINE }, { 0x8500c, 4, RI_ALL_OFFLINE },
-	{ 0x8501c, 7, RI_ALL_ONLINE }, { 0x85038, 4, RI_ALL_OFFLINE },
-	{ 0x85048, 1, RI_ALL_ONLINE }, { 0x8504c, 109, RI_ALL_OFFLINE },
-	{ 0x85200, 32, RI_ALL_ONLINE }, { 0x85280, 11104, RI_ALL_OFFLINE },
-	{ 0xa0000, 16384, RI_ALL_ONLINE }, { 0xb0000, 16384, RI_E1H_ONLINE },
-	{ 0xc1000, 7, RI_ALL_ONLINE }, { 0xc1028, 1, RI_ALL_ONLINE },
-	{ 0xc1038, 1, RI_ALL_ONLINE }, { 0xc1800, 2, RI_ALL_ONLINE },
-	{ 0xc2000, 164, RI_ALL_ONLINE }, { 0xc229c, 1, RI_ALL_ONLINE },
-	{ 0xc22ac, 1, RI_ALL_ONLINE }, { 0xc22bc, 1, RI_ALL_ONLINE },
+	{ 0x70000, 8, RI_ALL_ONLINE }, { 0x70020, 8184, RI_ALL_OFFLINE },
+	{ 0x85000, 3, RI_ALL_ONLINE }, { 0x8501c, 7, RI_ALL_ONLINE },
+	{ 0x85048, 1, RI_ALL_ONLINE }, { 0x85200, 32, RI_ALL_ONLINE },
+	{ 0xc1000, 7, RI_ALL_ONLINE }, { 0xc103c, 2, RI_E2_ONLINE },
+	{ 0xc1800, 2, RI_ALL_ONLINE }, { 0xc2000, 164, RI_ALL_ONLINE },
+	{ 0xc22c0, 5, RI_E2_ONLINE }, { 0xc22d8, 4, RI_E2_ONLINE },
 	{ 0xc2400, 49, RI_ALL_ONLINE }, { 0xc24c8, 38, RI_ALL_ONLINE },
 	{ 0xc2568, 2, RI_ALL_ONLINE }, { 0xc2600, 1, RI_ALL_ONLINE },
-	{ 0xc4000, 165, RI_ALL_ONLINE }, { 0xc42a0, 1, RI_ALL_ONLINE },
-	{ 0xc42b0, 1, RI_ALL_ONLINE }, { 0xc42c0, 1, RI_ALL_ONLINE },
-	{ 0xc42e0, 7, RI_E1H_ONLINE }, { 0xc4400, 51, RI_ALL_ONLINE },
-	{ 0xc44d0, 38, RI_ALL_ONLINE }, { 0xc4570, 2, RI_ALL_ONLINE },
+	{ 0xc4000, 165, RI_ALL_ONLINE }, { 0xc42d8, 2, RI_E2_ONLINE },
+	{ 0xc42e0, 7, RI_E1HE2_ONLINE }, { 0xc42fc, 1, RI_E2_ONLINE },
+	{ 0xc4400, 51, RI_ALL_ONLINE }, { 0xc44d0, 38, RI_ALL_ONLINE },
+	{ 0xc4570, 2, RI_ALL_ONLINE }, { 0xc4578, 5, RI_E2_ONLINE },
 	{ 0xc4600, 1, RI_ALL_ONLINE }, { 0xd0000, 19, RI_ALL_ONLINE },
 	{ 0xd004c, 8, RI_ALL_ONLINE }, { 0xd006c, 91, RI_ALL_ONLINE },
-	{ 0xd01e4, 1, RI_ALL_ONLINE }, { 0xd01f4, 1, RI_ALL_ONLINE },
-	{ 0xd0200, 2, RI_ALL_ONLINE }, { 0xd020c, 7, RI_ALL_ONLINE },
-	{ 0xd0228, 18, RI_E1H_ONLINE }, { 0xd0280, 1, RI_ALL_ONLINE },
-	{ 0xd0300, 1, RI_ALL_ONLINE }, { 0xd0400, 1, RI_ALL_ONLINE },
-	{ 0xd4000, 1, RI_ALL_ONLINE }, { 0xd4004, 2559, RI_ALL_OFFLINE },
-	{ 0xd8000, 1, RI_ALL_ONLINE }, { 0xd8004, 8191, RI_ALL_OFFLINE },
-	{ 0xe0000, 21, RI_ALL_ONLINE }, { 0xe0054, 8, RI_ALL_ONLINE },
-	{ 0xe0074, 85, RI_ALL_ONLINE }, { 0xe01d4, 1, RI_ALL_ONLINE },
-	{ 0xe01e4, 1, RI_ALL_ONLINE }, { 0xe0200, 2, RI_ALL_ONLINE },
-	{ 0xe020c, 8, RI_ALL_ONLINE }, { 0xe022c, 18, RI_E1H_ONLINE },
+	{ 0xd01fc, 1, RI_E2_ONLINE }, { 0xd0200, 2, RI_ALL_ONLINE },
+	{ 0xd020c, 7, RI_ALL_ONLINE }, { 0xd0228, 18, RI_E1HE2_ONLINE },
+	{ 0xd0280, 1, RI_ALL_ONLINE }, { 0xd0300, 1, RI_ALL_ONLINE },
+	{ 0xd0400, 1, RI_ALL_ONLINE }, { 0xd4000, 1, RI_ALL_ONLINE },
+	{ 0xd4004, 2559, RI_ALL_OFFLINE }, { 0xd8000, 1, RI_ALL_ONLINE },
+	{ 0xd8004, 8191, RI_ALL_OFFLINE }, { 0xe0000, 21, RI_ALL_ONLINE },
+	{ 0xe0054, 8, RI_ALL_ONLINE }, { 0xe0074, 49, RI_ALL_ONLINE },
+	{ 0xe0138, 1, RI_E1E1H_ONLINE }, { 0xe013c, 35, RI_ALL_ONLINE },
+	{ 0xe01f4, 2, RI_E2_ONLINE }, { 0xe0200, 2, RI_ALL_ONLINE },
+	{ 0xe020c, 8, RI_ALL_ONLINE }, { 0xe022c, 18, RI_E1HE2_ONLINE },
 	{ 0xe0280, 1, RI_ALL_ONLINE }, { 0xe0300, 1, RI_ALL_ONLINE },
 	{ 0xe1000, 1, RI_ALL_ONLINE }, { 0xe2000, 1, RI_ALL_ONLINE },
 	{ 0xe2004, 2047, RI_ALL_OFFLINE }, { 0xf0000, 1, RI_ALL_ONLINE },
 	{ 0xf0004, 16383, RI_ALL_OFFLINE }, { 0x101000, 12, RI_ALL_ONLINE },
-	{ 0x10103c, 1, RI_ALL_ONLINE }, { 0x10104c, 1, RI_ALL_ONLINE },
-	{ 0x101050, 1, RI_E1H_ONLINE }, { 0x101100, 1, RI_ALL_ONLINE },
-	{ 0x101800, 8, RI_ALL_ONLINE }, { 0x102000, 18, RI_ALL_ONLINE },
-	{ 0x102054, 1, RI_ALL_ONLINE }, { 0x102064, 1, RI_ALL_ONLINE },
+	{ 0x101050, 1, RI_E1HE2_ONLINE }, { 0x101054, 3, RI_E2_ONLINE },
+	{ 0x101100, 1, RI_ALL_ONLINE }, { 0x101800, 8, RI_ALL_ONLINE },
+	{ 0x102000, 18, RI_ALL_ONLINE }, { 0x102068, 6, RI_E2_ONLINE },
 	{ 0x102080, 17, RI_ALL_ONLINE }, { 0x1020c8, 8, RI_E1H_ONLINE },
-	{ 0x102400, 1, RI_ALL_ONLINE }, { 0x103000, 26, RI_ALL_ONLINE },
-	{ 0x103074, 1, RI_ALL_ONLINE }, { 0x103084, 1, RI_ALL_ONLINE },
-	{ 0x103094, 1, RI_ALL_ONLINE }, { 0x103098, 5, RI_E1H_ONLINE },
+	{ 0x1020e8, 9, RI_E2_ONLINE }, { 0x102400, 1, RI_ALL_ONLINE },
+	{ 0x103000, 26, RI_ALL_ONLINE }, { 0x103098, 5, RI_E1HE2_ONLINE },
+	{ 0x1030ac, 10, RI_E2_ONLINE }, { 0x1030d8, 8, RI_E2_ONLINE },
+	{ 0x103400, 1, RI_E2_ONLINE }, { 0x103404, 135, RI_E2_OFFLINE },
 	{ 0x103800, 8, RI_ALL_ONLINE }, { 0x104000, 63, RI_ALL_ONLINE },
-	{ 0x104108, 1, RI_ALL_ONLINE }, { 0x104118, 1, RI_ALL_ONLINE },
-	{ 0x104200, 17, RI_ALL_ONLINE }, { 0x104400, 64, RI_ALL_ONLINE },
-	{ 0x104500, 192, RI_ALL_OFFLINE }, { 0x104800, 64, RI_ALL_ONLINE },
-	{ 0x104900, 192, RI_ALL_OFFLINE }, { 0x105000, 7, RI_ALL_ONLINE },
-	{ 0x10501c, 1, RI_ALL_OFFLINE }, { 0x105020, 3, RI_ALL_ONLINE },
-	{ 0x10502c, 1, RI_ALL_OFFLINE }, { 0x105030, 3, RI_ALL_ONLINE },
-	{ 0x10503c, 1, RI_ALL_OFFLINE }, { 0x105040, 3, RI_ALL_ONLINE },
-	{ 0x10504c, 1, RI_ALL_OFFLINE }, { 0x105050, 3, RI_ALL_ONLINE },
-	{ 0x10505c, 1, RI_ALL_OFFLINE }, { 0x105060, 3, RI_ALL_ONLINE },
-	{ 0x10506c, 1, RI_ALL_OFFLINE }, { 0x105070, 3, RI_ALL_ONLINE },
-	{ 0x10507c, 1, RI_ALL_OFFLINE }, { 0x105080, 3, RI_ALL_ONLINE },
-	{ 0x10508c, 1, RI_ALL_OFFLINE }, { 0x105090, 3, RI_ALL_ONLINE },
-	{ 0x10509c, 1, RI_ALL_OFFLINE }, { 0x1050a0, 3, RI_ALL_ONLINE },
-	{ 0x1050ac, 1, RI_ALL_OFFLINE }, { 0x1050b0, 3, RI_ALL_ONLINE },
-	{ 0x1050bc, 1, RI_ALL_OFFLINE }, { 0x1050c0, 3, RI_ALL_ONLINE },
-	{ 0x1050cc, 1, RI_ALL_OFFLINE }, { 0x1050d0, 3, RI_ALL_ONLINE },
-	{ 0x1050dc, 1, RI_ALL_OFFLINE }, { 0x1050e0, 3, RI_ALL_ONLINE },
-	{ 0x1050ec, 1, RI_ALL_OFFLINE }, { 0x1050f0, 3, RI_ALL_ONLINE },
-	{ 0x1050fc, 1, RI_ALL_OFFLINE }, { 0x105100, 3, RI_ALL_ONLINE },
-	{ 0x10510c, 1, RI_ALL_OFFLINE }, { 0x105110, 3, RI_ALL_ONLINE },
-	{ 0x10511c, 1, RI_ALL_OFFLINE }, { 0x105120, 3, RI_ALL_ONLINE },
-	{ 0x10512c, 1, RI_ALL_OFFLINE }, { 0x105130, 3, RI_ALL_ONLINE },
-	{ 0x10513c, 1, RI_ALL_OFFLINE }, { 0x105140, 3, RI_ALL_ONLINE },
-	{ 0x10514c, 1, RI_ALL_OFFLINE }, { 0x105150, 3, RI_ALL_ONLINE },
-	{ 0x10515c, 1, RI_ALL_OFFLINE }, { 0x105160, 3, RI_ALL_ONLINE },
-	{ 0x10516c, 1, RI_ALL_OFFLINE }, { 0x105170, 3, RI_ALL_ONLINE },
-	{ 0x10517c, 1, RI_ALL_OFFLINE }, { 0x105180, 3, RI_ALL_ONLINE },
-	{ 0x10518c, 1, RI_ALL_OFFLINE }, { 0x105190, 3, RI_ALL_ONLINE },
-	{ 0x10519c, 1, RI_ALL_OFFLINE }, { 0x1051a0, 3, RI_ALL_ONLINE },
-	{ 0x1051ac, 1, RI_ALL_OFFLINE }, { 0x1051b0, 3, RI_ALL_ONLINE },
-	{ 0x1051bc, 1, RI_ALL_OFFLINE }, { 0x1051c0, 3, RI_ALL_ONLINE },
-	{ 0x1051cc, 1, RI_ALL_OFFLINE }, { 0x1051d0, 3, RI_ALL_ONLINE },
-	{ 0x1051dc, 1, RI_ALL_OFFLINE }, { 0x1051e0, 3, RI_ALL_ONLINE },
-	{ 0x1051ec, 1, RI_ALL_OFFLINE }, { 0x1051f0, 3, RI_ALL_ONLINE },
-	{ 0x1051fc, 1, RI_ALL_OFFLINE }, { 0x105200, 3, RI_ALL_ONLINE },
-	{ 0x10520c, 1, RI_ALL_OFFLINE }, { 0x105210, 3, RI_ALL_ONLINE },
-	{ 0x10521c, 1, RI_ALL_OFFLINE }, { 0x105220, 3, RI_ALL_ONLINE },
-	{ 0x10522c, 1, RI_ALL_OFFLINE }, { 0x105230, 3, RI_ALL_ONLINE },
-	{ 0x10523c, 1, RI_ALL_OFFLINE }, { 0x105240, 3, RI_ALL_ONLINE },
-	{ 0x10524c, 1, RI_ALL_OFFLINE }, { 0x105250, 3, RI_ALL_ONLINE },
-	{ 0x10525c, 1, RI_ALL_OFFLINE }, { 0x105260, 3, RI_ALL_ONLINE },
-	{ 0x10526c, 1, RI_ALL_OFFLINE }, { 0x105270, 3, RI_ALL_ONLINE },
-	{ 0x10527c, 1, RI_ALL_OFFLINE }, { 0x105280, 3, RI_ALL_ONLINE },
-	{ 0x10528c, 1, RI_ALL_OFFLINE }, { 0x105290, 3, RI_ALL_ONLINE },
-	{ 0x10529c, 1, RI_ALL_OFFLINE }, { 0x1052a0, 3, RI_ALL_ONLINE },
-	{ 0x1052ac, 1, RI_ALL_OFFLINE }, { 0x1052b0, 3, RI_ALL_ONLINE },
-	{ 0x1052bc, 1, RI_ALL_OFFLINE }, { 0x1052c0, 3, RI_ALL_ONLINE },
-	{ 0x1052cc, 1, RI_ALL_OFFLINE }, { 0x1052d0, 3, RI_ALL_ONLINE },
-	{ 0x1052dc, 1, RI_ALL_OFFLINE }, { 0x1052e0, 3, RI_ALL_ONLINE },
-	{ 0x1052ec, 1, RI_ALL_OFFLINE }, { 0x1052f0, 3, RI_ALL_ONLINE },
-	{ 0x1052fc, 1, RI_ALL_OFFLINE }, { 0x105300, 3, RI_ALL_ONLINE },
-	{ 0x10530c, 1, RI_ALL_OFFLINE }, { 0x105310, 3, RI_ALL_ONLINE },
-	{ 0x10531c, 1, RI_ALL_OFFLINE }, { 0x105320, 3, RI_ALL_ONLINE },
-	{ 0x10532c, 1, RI_ALL_OFFLINE }, { 0x105330, 3, RI_ALL_ONLINE },
-	{ 0x10533c, 1, RI_ALL_OFFLINE }, { 0x105340, 3, RI_ALL_ONLINE },
-	{ 0x10534c, 1, RI_ALL_OFFLINE }, { 0x105350, 3, RI_ALL_ONLINE },
-	{ 0x10535c, 1, RI_ALL_OFFLINE }, { 0x105360, 3, RI_ALL_ONLINE },
-	{ 0x10536c, 1, RI_ALL_OFFLINE }, { 0x105370, 3, RI_ALL_ONLINE },
-	{ 0x10537c, 1, RI_ALL_OFFLINE }, { 0x105380, 3, RI_ALL_ONLINE },
-	{ 0x10538c, 1, RI_ALL_OFFLINE }, { 0x105390, 3, RI_ALL_ONLINE },
-	{ 0x10539c, 1, RI_ALL_OFFLINE }, { 0x1053a0, 3, RI_ALL_ONLINE },
-	{ 0x1053ac, 1, RI_ALL_OFFLINE }, { 0x1053b0, 3, RI_ALL_ONLINE },
-	{ 0x1053bc, 1, RI_ALL_OFFLINE }, { 0x1053c0, 3, RI_ALL_ONLINE },
-	{ 0x1053cc, 1, RI_ALL_OFFLINE }, { 0x1053d0, 3, RI_ALL_ONLINE },
-	{ 0x1053dc, 1, RI_ALL_OFFLINE }, { 0x1053e0, 3, RI_ALL_ONLINE },
-	{ 0x1053ec, 1, RI_ALL_OFFLINE }, { 0x1053f0, 3, RI_ALL_ONLINE },
-	{ 0x1053fc, 769, RI_ALL_OFFLINE }, { 0x108000, 33, RI_ALL_ONLINE },
-	{ 0x108090, 1, RI_ALL_ONLINE }, { 0x1080a0, 1, RI_ALL_ONLINE },
-	{ 0x1080ac, 5, RI_E1H_ONLINE }, { 0x108100, 5, RI_ALL_ONLINE },
-	{ 0x108120, 5, RI_ALL_ONLINE }, { 0x108200, 74, RI_ALL_ONLINE },
-	{ 0x108400, 74, RI_ALL_ONLINE }, { 0x108800, 152, RI_ALL_ONLINE },
-	{ 0x109000, 1, RI_ALL_ONLINE }, { 0x120000, 347, RI_ALL_ONLINE },
-	{ 0x120578, 1, RI_ALL_ONLINE }, { 0x120588, 1, RI_ALL_ONLINE },
-	{ 0x120598, 1, RI_ALL_ONLINE }, { 0x12059c, 23, RI_E1H_ONLINE },
-	{ 0x120614, 1, RI_E1H_ONLINE }, { 0x12061c, 30, RI_E1H_ONLINE },
-	{ 0x12080c, 65, RI_ALL_ONLINE }, { 0x120a00, 2, RI_ALL_ONLINE },
-	{ 0x122000, 2, RI_ALL_ONLINE }, { 0x128000, 2, RI_E1H_ONLINE },
-	{ 0x140000, 114, RI_ALL_ONLINE }, { 0x1401d4, 1, RI_ALL_ONLINE },
-	{ 0x1401e4, 1, RI_ALL_ONLINE }, { 0x140200, 6, RI_ALL_ONLINE },
-	{ 0x144000, 4, RI_ALL_ONLINE }, { 0x148000, 4, RI_ALL_ONLINE },
-	{ 0x14c000, 4, RI_ALL_ONLINE }, { 0x150000, 4, RI_ALL_ONLINE },
-	{ 0x154000, 4, RI_ALL_ONLINE }, { 0x158000, 4, RI_ALL_ONLINE },
-	{ 0x15c000, 7, RI_E1H_ONLINE }, { 0x161000, 7, RI_ALL_ONLINE },
-	{ 0x161028, 1, RI_ALL_ONLINE }, { 0x161038, 1, RI_ALL_ONLINE },
-	{ 0x161800, 2, RI_ALL_ONLINE }, { 0x164000, 60, RI_ALL_ONLINE },
-	{ 0x1640fc, 1, RI_ALL_ONLINE }, { 0x16410c, 1, RI_ALL_ONLINE },
-	{ 0x164110, 2, RI_E1H_ONLINE }, { 0x164200, 1, RI_ALL_ONLINE },
+	{ 0x10411c, 16, RI_E2_ONLINE }, { 0x104200, 17, RI_ALL_ONLINE },
+	{ 0x104400, 64, RI_ALL_ONLINE }, { 0x104500, 192, RI_ALL_OFFLINE },
+	{ 0x104800, 64, RI_ALL_ONLINE }, { 0x104900, 192, RI_ALL_OFFLINE },
+	{ 0x105000, 256, RI_ALL_ONLINE }, { 0x105400, 768, RI_ALL_OFFLINE },
+	{ 0x107000, 7, RI_E2_ONLINE }, { 0x108000, 33, RI_E1E1H_ONLINE },
+	{ 0x1080ac, 5, RI_E1H_ONLINE }, { 0x108100, 5, RI_E1E1H_ONLINE },
+	{ 0x108120, 5, RI_E1E1H_ONLINE }, { 0x108200, 74, RI_E1E1H_ONLINE },
+	{ 0x108400, 74, RI_E1E1H_ONLINE }, { 0x108800, 152, RI_E1E1H_ONLINE },
+	{ 0x110000, 111, RI_E2_ONLINE }, { 0x110200, 4, RI_E2_ONLINE },
+	{ 0x120000, 2, RI_ALL_ONLINE }, { 0x120008, 4, RI_ALL_ONLINE },
+	{ 0x120018, 3, RI_ALL_ONLINE }, { 0x120024, 4, RI_ALL_ONLINE },
+	{ 0x120034, 3, RI_ALL_ONLINE }, { 0x120040, 4, RI_ALL_ONLINE },
+	{ 0x120050, 3, RI_ALL_ONLINE }, { 0x12005c, 4, RI_ALL_ONLINE },
+	{ 0x12006c, 3, RI_ALL_ONLINE }, { 0x120078, 4, RI_ALL_ONLINE },
+	{ 0x120088, 3, RI_ALL_ONLINE }, { 0x120094, 4, RI_ALL_ONLINE },
+	{ 0x1200a4, 3, RI_ALL_ONLINE }, { 0x1200b0, 4, RI_ALL_ONLINE },
+	{ 0x1200c0, 3, RI_ALL_ONLINE }, { 0x1200cc, 4, RI_ALL_ONLINE },
+	{ 0x1200dc, 3, RI_ALL_ONLINE }, { 0x1200e8, 4, RI_ALL_ONLINE },
+	{ 0x1200f8, 3, RI_ALL_ONLINE }, { 0x120104, 4, RI_ALL_ONLINE },
+	{ 0x120114, 1, RI_ALL_ONLINE }, { 0x120118, 22, RI_ALL_ONLINE },
+	{ 0x120170, 2, RI_E1E1H_ONLINE }, { 0x120178, 243, RI_ALL_ONLINE },
+	{ 0x120544, 4, RI_E1E1H_ONLINE }, { 0x120554, 7, RI_ALL_ONLINE },
+	{ 0x12059c, 6, RI_E1HE2_ONLINE }, { 0x1205b4, 1, RI_E1HE2_ONLINE },
+	{ 0x1205b8, 16, RI_E1HE2_ONLINE }, { 0x1205f8, 4, RI_E2_ONLINE },
+	{ 0x120618, 1, RI_E2_ONLINE }, { 0x12061c, 20, RI_E1HE2_ONLINE },
+	{ 0x12066c, 11, RI_E1HE2_ONLINE }, { 0x120698, 5, RI_E2_ONLINE },
+	{ 0x1206b0, 76, RI_E2_ONLINE }, { 0x1207fc, 1, RI_E2_ONLINE },
+	{ 0x120808, 66, RI_ALL_ONLINE }, { 0x120910, 7, RI_E2_ONLINE },
+	{ 0x120930, 9, RI_E2_ONLINE }, { 0x120a00, 2, RI_ALL_ONLINE },
+	{ 0x122000, 2, RI_ALL_ONLINE }, { 0x122008, 2046, RI_E1_OFFLINE },
+	{ 0x128000, 2, RI_E1HE2_ONLINE }, { 0x128008, 6142, RI_E1HE2_OFFLINE },
+	{ 0x130000, 35, RI_E2_ONLINE }, { 0x130100, 29, RI_E2_ONLINE },
+	{ 0x130180, 1, RI_E2_ONLINE }, { 0x130200, 1, RI_E2_ONLINE },
+	{ 0x130280, 1, RI_E2_ONLINE }, { 0x130300, 5, RI_E2_ONLINE },
+	{ 0x130380, 1, RI_E2_ONLINE }, { 0x130400, 1, RI_E2_ONLINE },
+	{ 0x130480, 5, RI_E2_ONLINE }, { 0x130800, 72, RI_E2_ONLINE },
+	{ 0x131000, 136, RI_E2_ONLINE }, { 0x132000, 148, RI_E2_ONLINE },
+	{ 0x134000, 544, RI_E2_ONLINE }, { 0x140000, 64, RI_ALL_ONLINE },
+	{ 0x140100, 5, RI_E1E1H_ONLINE }, { 0x140114, 45, RI_ALL_ONLINE },
+	{ 0x140200, 6, RI_ALL_ONLINE }, { 0x140220, 4, RI_E2_ONLINE },
+	{ 0x140240, 4, RI_E2_ONLINE }, { 0x140260, 4, RI_E2_ONLINE },
+	{ 0x140280, 4, RI_E2_ONLINE }, { 0x1402a0, 4, RI_E2_ONLINE },
+	{ 0x1402c0, 4, RI_E2_ONLINE }, { 0x1402e0, 13, RI_E2_ONLINE },
+	{ 0x144000, 4, RI_E1E1H_ONLINE }, { 0x148000, 4, RI_E1E1H_ONLINE },
+	{ 0x14c000, 4, RI_E1E1H_ONLINE }, { 0x150000, 4, RI_E1E1H_ONLINE },
+	{ 0x154000, 4, RI_E1E1H_ONLINE }, { 0x158000, 4, RI_E1E1H_ONLINE },
+	{ 0x15c000, 2, RI_E1HE2_ONLINE }, { 0x15c008, 5, RI_E1H_ONLINE },
+	{ 0x15c020, 27, RI_E2_ONLINE }, { 0x15c090, 13, RI_E2_ONLINE },
+	{ 0x15c0c8, 34, RI_E2_ONLINE }, { 0x161000, 7, RI_ALL_ONLINE },
+	{ 0x16103c, 2, RI_E2_ONLINE }, { 0x161800, 2, RI_ALL_ONLINE },
+	{ 0x164000, 60, RI_ALL_ONLINE }, { 0x164110, 2, RI_E1HE2_ONLINE },
+	{ 0x164118, 15, RI_E2_ONLINE }, { 0x164200, 1, RI_ALL_ONLINE },
 	{ 0x164208, 1, RI_ALL_ONLINE }, { 0x164210, 1, RI_ALL_ONLINE },
 	{ 0x164218, 1, RI_ALL_ONLINE }, { 0x164220, 1, RI_ALL_ONLINE },
 	{ 0x164228, 1, RI_ALL_ONLINE }, { 0x164230, 1, RI_ALL_ONLINE },
@@ -284,169 +273,298 @@ static const struct reg_addr reg_addrs[REGS_COUNT] = {
 	{ 0x164258, 1, RI_ALL_ONLINE }, { 0x164260, 1, RI_ALL_ONLINE },
 	{ 0x164270, 2, RI_ALL_ONLINE }, { 0x164280, 2, RI_ALL_ONLINE },
 	{ 0x164800, 2, RI_ALL_ONLINE }, { 0x165000, 2, RI_ALL_ONLINE },
-	{ 0x166000, 164, RI_ALL_ONLINE }, { 0x16629c, 1, RI_ALL_ONLINE },
-	{ 0x1662ac, 1, RI_ALL_ONLINE }, { 0x1662bc, 1, RI_ALL_ONLINE },
+	{ 0x166000, 164, RI_ALL_ONLINE }, { 0x1662cc, 7, RI_E2_ONLINE },
 	{ 0x166400, 49, RI_ALL_ONLINE }, { 0x1664c8, 38, RI_ALL_ONLINE },
-	{ 0x166568, 2, RI_ALL_ONLINE }, { 0x166800, 1, RI_ALL_ONLINE },
-	{ 0x168000, 270, RI_ALL_ONLINE }, { 0x168444, 1, RI_ALL_ONLINE },
-	{ 0x168454, 1, RI_ALL_ONLINE }, { 0x168800, 19, RI_ALL_ONLINE },
-	{ 0x168900, 1, RI_ALL_ONLINE }, { 0x168a00, 128, RI_ALL_ONLINE },
-	{ 0x16a000, 1, RI_ALL_ONLINE }, { 0x16a004, 1535, RI_ALL_OFFLINE },
-	{ 0x16c000, 1, RI_ALL_ONLINE }, { 0x16c004, 1535, RI_ALL_OFFLINE },
-	{ 0x16e000, 16, RI_E1H_ONLINE }, { 0x16e100, 1, RI_E1H_ONLINE },
-	{ 0x16e200, 2, RI_E1H_ONLINE }, { 0x16e400, 183, RI_E1H_ONLINE },
-	{ 0x170000, 93, RI_ALL_ONLINE }, { 0x170180, 1, RI_ALL_ONLINE },
-	{ 0x170190, 1, RI_ALL_ONLINE }, { 0x170200, 4, RI_ALL_ONLINE },
-	{ 0x170214, 1, RI_ALL_ONLINE }, { 0x178000, 1, RI_ALL_ONLINE },
-	{ 0x180000, 61, RI_ALL_ONLINE }, { 0x180100, 1, RI_ALL_ONLINE },
-	{ 0x180110, 1, RI_ALL_ONLINE }, { 0x180120, 1, RI_ALL_ONLINE },
-	{ 0x180130, 1, RI_ALL_ONLINE }, { 0x18013c, 2, RI_E1H_ONLINE },
-	{ 0x180200, 58, RI_ALL_ONLINE }, { 0x180340, 4, RI_ALL_ONLINE },
-	{ 0x180400, 1, RI_ALL_ONLINE }, { 0x180404, 255, RI_ALL_OFFLINE },
+	{ 0x166568, 2, RI_ALL_ONLINE }, { 0x166570, 5, RI_E2_ONLINE },
+	{ 0x166800, 1, RI_ALL_ONLINE }, { 0x168000, 137, RI_ALL_ONLINE },
+	{ 0x168224, 2, RI_E1E1H_ONLINE }, { 0x16822c, 29, RI_ALL_ONLINE },
+	{ 0x1682a0, 12, RI_E1E1H_ONLINE }, { 0x1682d0, 12, RI_ALL_ONLINE },
+	{ 0x168300, 2, RI_E1E1H_ONLINE }, { 0x168308, 68, RI_ALL_ONLINE },
+	{ 0x168418, 2, RI_E1E1H_ONLINE }, { 0x168420, 6, RI_ALL_ONLINE },
+	{ 0x168800, 19, RI_ALL_ONLINE }, { 0x168900, 1, RI_ALL_ONLINE },
+	{ 0x168a00, 128, RI_ALL_ONLINE }, { 0x16a000, 1, RI_ALL_ONLINE },
+	{ 0x16a004, 1535, RI_ALL_OFFLINE }, { 0x16c000, 1, RI_ALL_ONLINE },
+	{ 0x16c004, 1535, RI_ALL_OFFLINE }, { 0x16e000, 16, RI_E1H_ONLINE },
+	{ 0x16e040, 8, RI_E2_ONLINE }, { 0x16e100, 1, RI_E1H_ONLINE },
+	{ 0x16e200, 2, RI_E1H_ONLINE }, { 0x16e400, 161, RI_E1H_ONLINE },
+	{ 0x16e684, 2, RI_E1HE2_ONLINE }, { 0x16e68c, 12, RI_E1H_ONLINE },
+	{ 0x16e6bc, 4, RI_E1HE2_ONLINE }, { 0x16e6cc, 4, RI_E1H_ONLINE },
+	{ 0x16e6e0, 12, RI_E2_ONLINE }, { 0x16e768, 17, RI_E2_ONLINE },
+	{ 0x170000, 24, RI_ALL_ONLINE }, { 0x170060, 4, RI_E1E1H_ONLINE },
+	{ 0x170070, 65, RI_ALL_ONLINE }, { 0x170194, 11, RI_E2_ONLINE },
+	{ 0x1701c4, 1, RI_E2_ONLINE }, { 0x1701cc, 7, RI_E2_ONLINE },
+	{ 0x1701ec, 1, RI_E2_ONLINE }, { 0x1701f4, 1, RI_E2_ONLINE },
+	{ 0x170200, 4, RI_ALL_ONLINE }, { 0x170214, 1, RI_ALL_ONLINE },
+	{ 0x170218, 77, RI_E2_ONLINE }, { 0x170400, 64, RI_E2_ONLINE },
+	{ 0x178000, 1, RI_ALL_ONLINE }, { 0x180000, 61, RI_ALL_ONLINE },
+	{ 0x18013c, 2, RI_E1HE2_ONLINE }, { 0x180200, 58, RI_ALL_ONLINE },
+	{ 0x180340, 4, RI_ALL_ONLINE }, { 0x180380, 1, RI_E2_ONLINE },
+	{ 0x180388, 1, RI_E2_ONLINE }, { 0x180390, 1, RI_E2_ONLINE },
+	{ 0x180398, 1, RI_E2_ONLINE }, { 0x1803a0, 5, RI_E2_ONLINE },
+	{ 0x180400, 1, RI_ALL_ONLINE }, { 0x180404, 255, RI_E1E1H_OFFLINE },
 	{ 0x181000, 4, RI_ALL_ONLINE }, { 0x181010, 1020, RI_ALL_OFFLINE },
-	{ 0x1a0000, 1, RI_ALL_ONLINE }, { 0x1a0004, 1023, RI_ALL_OFFLINE },
-	{ 0x1a1000, 1, RI_ALL_ONLINE }, { 0x1a1004, 4607, RI_ALL_OFFLINE },
-	{ 0x1a5800, 2560, RI_E1H_OFFLINE }, { 0x1a8000, 64, RI_ALL_OFFLINE },
-	{ 0x1a8100, 1984, RI_E1H_OFFLINE }, { 0x1aa000, 1, RI_E1H_ONLINE },
-	{ 0x1aa004, 6655, RI_E1H_OFFLINE }, { 0x1b1800, 128, RI_ALL_OFFLINE },
-	{ 0x1b1c00, 128, RI_ALL_OFFLINE }, { 0x1b2000, 1, RI_ALL_OFFLINE },
-	{ 0x1b2400, 64, RI_E1H_OFFLINE }, { 0x1b8200, 1, RI_ALL_ONLINE },
+	{ 0x1a0000, 1, RI_ALL_ONLINE }, { 0x1a0004, 5631, RI_ALL_OFFLINE },
+	{ 0x1a5800, 2560, RI_E1HE2_OFFLINE }, { 0x1a8000, 1, RI_ALL_ONLINE },
+	{ 0x1a8004, 8191, RI_E1HE2_OFFLINE }, { 0x1b0000, 1, RI_ALL_ONLINE },
+	{ 0x1b0004, 15, RI_E1H_OFFLINE }, { 0x1b0040, 1, RI_E1HE2_ONLINE },
+	{ 0x1b0044, 239, RI_E1H_OFFLINE }, { 0x1b0400, 1, RI_ALL_ONLINE },
+	{ 0x1b0404, 255, RI_E1H_OFFLINE }, { 0x1b0800, 1, RI_ALL_ONLINE },
+	{ 0x1b0840, 1, RI_E1HE2_ONLINE }, { 0x1b0c00, 1, RI_ALL_ONLINE },
+	{ 0x1b1000, 1, RI_ALL_ONLINE }, { 0x1b1040, 1, RI_E1HE2_ONLINE },
+	{ 0x1b1400, 1, RI_ALL_ONLINE }, { 0x1b1440, 1, RI_E1HE2_ONLINE },
+	{ 0x1b1480, 1, RI_E1HE2_ONLINE }, { 0x1b14c0, 1, RI_E1HE2_ONLINE },
+	{ 0x1b1800, 128, RI_ALL_OFFLINE }, { 0x1b1c00, 128, RI_ALL_OFFLINE },
+	{ 0x1b2000, 1, RI_ALL_ONLINE }, { 0x1b2400, 1, RI_E1HE2_ONLINE },
+	{ 0x1b2404, 5631, RI_E2_OFFLINE }, { 0x1b8000, 1, RI_ALL_ONLINE },
+	{ 0x1b8040, 1, RI_ALL_ONLINE }, { 0x1b8080, 1, RI_ALL_ONLINE },
+	{ 0x1b80c0, 1, RI_ALL_ONLINE }, { 0x1b8100, 1, RI_ALL_ONLINE },
+	{ 0x1b8140, 1, RI_ALL_ONLINE }, { 0x1b8180, 1, RI_ALL_ONLINE },
+	{ 0x1b81c0, 1, RI_ALL_ONLINE }, { 0x1b8200, 1, RI_ALL_ONLINE },
 	{ 0x1b8240, 1, RI_ALL_ONLINE }, { 0x1b8280, 1, RI_ALL_ONLINE },
-	{ 0x1b82c0, 1, RI_ALL_ONLINE }, { 0x1b8a00, 1, RI_ALL_ONLINE },
-	{ 0x1b8a80, 1, RI_ALL_ONLINE }, { 0x1c0000, 2, RI_ALL_ONLINE },
-	{ 0x200000, 65, RI_ALL_ONLINE }, { 0x200110, 1, RI_ALL_ONLINE },
-	{ 0x200120, 1, RI_ALL_ONLINE }, { 0x200130, 1, RI_ALL_ONLINE },
-	{ 0x200140, 1, RI_ALL_ONLINE }, { 0x20014c, 2, RI_E1H_ONLINE },
-	{ 0x200200, 58, RI_ALL_ONLINE }, { 0x200340, 4, RI_ALL_ONLINE },
-	{ 0x200400, 1, RI_ALL_ONLINE }, { 0x200404, 255, RI_ALL_OFFLINE },
-	{ 0x202000, 4, RI_ALL_ONLINE }, { 0x202010, 2044, RI_ALL_OFFLINE },
-	{ 0x220000, 1, RI_ALL_ONLINE }, { 0x220004, 1023, RI_ALL_OFFLINE },
-	{ 0x221000, 1, RI_ALL_ONLINE }, { 0x221004, 4607, RI_ALL_OFFLINE },
-	{ 0x225800, 1536, RI_E1H_OFFLINE }, { 0x227000, 1, RI_E1H_ONLINE },
-	{ 0x227004, 1023, RI_E1H_OFFLINE }, { 0x228000, 64, RI_ALL_OFFLINE },
-	{ 0x228100, 8640, RI_E1H_OFFLINE }, { 0x231800, 128, RI_ALL_OFFLINE },
-	{ 0x231c00, 128, RI_ALL_OFFLINE }, { 0x232000, 1, RI_ALL_OFFLINE },
-	{ 0x232400, 64, RI_E1H_OFFLINE }, { 0x238200, 1, RI_ALL_ONLINE },
-	{ 0x238240, 1, RI_ALL_ONLINE }, { 0x238280, 1, RI_ALL_ONLINE },
-	{ 0x2382c0, 1, RI_ALL_ONLINE }, { 0x238a00, 1, RI_ALL_ONLINE },
-	{ 0x238a80, 1, RI_ALL_ONLINE }, { 0x240000, 2, RI_ALL_ONLINE },
-	{ 0x280000, 65, RI_ALL_ONLINE }, { 0x280110, 1, RI_ALL_ONLINE },
-	{ 0x280120, 1, RI_ALL_ONLINE }, { 0x280130, 1, RI_ALL_ONLINE },
-	{ 0x280140, 1, RI_ALL_ONLINE }, { 0x28014c, 2, RI_E1H_ONLINE },
-	{ 0x280200, 58, RI_ALL_ONLINE }, { 0x280340, 4, RI_ALL_ONLINE },
-	{ 0x280400, 1, RI_ALL_ONLINE }, { 0x280404, 255, RI_ALL_OFFLINE },
-	{ 0x282000, 4, RI_ALL_ONLINE }, { 0x282010, 2044, RI_ALL_OFFLINE },
-	{ 0x2a0000, 1, RI_ALL_ONLINE }, { 0x2a0004, 1023, RI_ALL_OFFLINE },
-	{ 0x2a1000, 1, RI_ALL_ONLINE }, { 0x2a1004, 4607, RI_ALL_OFFLINE },
-	{ 0x2a5800, 2560, RI_E1H_OFFLINE }, { 0x2a8000, 64, RI_ALL_OFFLINE },
-	{ 0x2a8100, 960, RI_E1H_OFFLINE }, { 0x2a9000, 1, RI_E1H_ONLINE },
-	{ 0x2a9004, 7679, RI_E1H_OFFLINE }, { 0x2b1800, 128, RI_ALL_OFFLINE },
-	{ 0x2b1c00, 128, RI_ALL_OFFLINE }, { 0x2b2000, 1, RI_ALL_OFFLINE },
-	{ 0x2b2400, 64, RI_E1H_OFFLINE }, { 0x2b8200, 1, RI_ALL_ONLINE },
-	{ 0x2b8240, 1, RI_ALL_ONLINE }, { 0x2b8280, 1, RI_ALL_ONLINE },
-	{ 0x2b82c0, 1, RI_ALL_ONLINE }, { 0x2b8a00, 1, RI_ALL_ONLINE },
-	{ 0x2b8a80, 1, RI_ALL_ONLINE }, { 0x2c0000, 2, RI_ALL_ONLINE },
-	{ 0x300000, 65, RI_ALL_ONLINE }, { 0x300110, 1, RI_ALL_ONLINE },
-	{ 0x300120, 1, RI_ALL_ONLINE }, { 0x300130, 1, RI_ALL_ONLINE },
-	{ 0x300140, 1, RI_ALL_ONLINE }, { 0x30014c, 2, RI_E1H_ONLINE },
+	{ 0x1b82c0, 1, RI_ALL_ONLINE }, { 0x1b8300, 1, RI_ALL_ONLINE },
+	{ 0x1b8340, 1, RI_ALL_ONLINE }, { 0x1b8380, 1, RI_ALL_ONLINE },
+	{ 0x1b83c0, 1, RI_ALL_ONLINE }, { 0x1b8400, 1, RI_ALL_ONLINE },
+	{ 0x1b8440, 1, RI_ALL_ONLINE }, { 0x1b8480, 1, RI_ALL_ONLINE },
+	{ 0x1b84c0, 1, RI_ALL_ONLINE }, { 0x1b8500, 1, RI_ALL_ONLINE },
+	{ 0x1b8540, 1, RI_ALL_ONLINE }, { 0x1b8580, 1, RI_ALL_ONLINE },
+	{ 0x1b85c0, 19, RI_E2_ONLINE }, { 0x1b8800, 1, RI_ALL_ONLINE },
+	{ 0x1b8840, 1, RI_ALL_ONLINE }, { 0x1b8880, 1, RI_ALL_ONLINE },
+	{ 0x1b88c0, 1, RI_ALL_ONLINE }, { 0x1b8900, 1, RI_ALL_ONLINE },
+	{ 0x1b8940, 1, RI_ALL_ONLINE }, { 0x1b8980, 1, RI_ALL_ONLINE },
+	{ 0x1b89c0, 1, RI_ALL_ONLINE }, { 0x1b8a00, 1, RI_ALL_ONLINE },
+	{ 0x1b8a40, 1, RI_ALL_ONLINE }, { 0x1b8a80, 1, RI_ALL_ONLINE },
+	{ 0x1b8ac0, 1, RI_ALL_ONLINE }, { 0x1b8b00, 1, RI_ALL_ONLINE },
+	{ 0x1b8b40, 1, RI_ALL_ONLINE }, { 0x1b8b80, 1, RI_ALL_ONLINE },
+	{ 0x1b8bc0, 1, RI_ALL_ONLINE }, { 0x1b8c00, 1, RI_ALL_ONLINE },
+	{ 0x1b8c40, 1, RI_ALL_ONLINE }, { 0x1b8c80, 1, RI_ALL_ONLINE },
+	{ 0x1b8cc0, 1, RI_ALL_ONLINE }, { 0x1b8cc4, 1, RI_E2_ONLINE },
+	{ 0x1b8d00, 1, RI_ALL_ONLINE }, { 0x1b8d40, 1, RI_ALL_ONLINE },
+	{ 0x1b8d80, 1, RI_ALL_ONLINE }, { 0x1b8dc0, 1, RI_ALL_ONLINE },
+	{ 0x1b8e00, 1, RI_ALL_ONLINE }, { 0x1b8e40, 1, RI_ALL_ONLINE },
+	{ 0x1b8e80, 1, RI_ALL_ONLINE }, { 0x1b8e84, 1, RI_E2_ONLINE },
+	{ 0x1b8ec0, 1, RI_E1HE2_ONLINE }, { 0x1b8f00, 1, RI_E1HE2_ONLINE },
+	{ 0x1b8f40, 1, RI_E1HE2_ONLINE }, { 0x1b8f80, 1, RI_E1HE2_ONLINE },
+	{ 0x1b8fc0, 1, RI_E1HE2_ONLINE }, { 0x1b8fc4, 2, RI_E2_ONLINE },
+	{ 0x1b8fd0, 6, RI_E2_ONLINE }, { 0x1b9000, 1, RI_E2_ONLINE },
+	{ 0x1b9040, 3, RI_E2_ONLINE }, { 0x1b9400, 14, RI_E2_ONLINE },
+	{ 0x1b943c, 19, RI_E2_ONLINE }, { 0x1b9490, 10, RI_E2_ONLINE },
+	{ 0x1c0000, 2, RI_ALL_ONLINE }, { 0x200000, 65, RI_ALL_ONLINE },
+	{ 0x20014c, 2, RI_E1HE2_ONLINE }, { 0x200200, 58, RI_ALL_ONLINE },
+	{ 0x200340, 4, RI_ALL_ONLINE }, { 0x200380, 1, RI_E2_ONLINE },
+	{ 0x200388, 1, RI_E2_ONLINE }, { 0x200390, 1, RI_E2_ONLINE },
+	{ 0x200398, 1, RI_E2_ONLINE }, { 0x2003a0, 1, RI_E2_ONLINE },
+	{ 0x2003a8, 2, RI_E2_ONLINE }, { 0x200400, 1, RI_ALL_ONLINE },
+	{ 0x200404, 255, RI_E1E1H_OFFLINE }, { 0x202000, 4, RI_ALL_ONLINE },
+	{ 0x202010, 2044, RI_ALL_OFFLINE }, { 0x220000, 1, RI_ALL_ONLINE },
+	{ 0x220004, 5631, RI_ALL_OFFLINE }, { 0x225800, 2560, RI_E1HE2_OFFLINE},
+	{ 0x228000, 1, RI_ALL_ONLINE }, { 0x228004, 8191, RI_E1HE2_OFFLINE },
+	{ 0x230000, 1, RI_ALL_ONLINE }, { 0x230004, 15, RI_E1H_OFFLINE },
+	{ 0x230040, 1, RI_E1HE2_ONLINE }, { 0x230044, 239, RI_E1H_OFFLINE },
+	{ 0x230400, 1, RI_ALL_ONLINE }, { 0x230404, 255, RI_E1H_OFFLINE },
+	{ 0x230800, 1, RI_ALL_ONLINE }, { 0x230840, 1, RI_E1HE2_ONLINE },
+	{ 0x230c00, 1, RI_ALL_ONLINE }, { 0x231000, 1, RI_ALL_ONLINE },
+	{ 0x231040, 1, RI_E1HE2_ONLINE }, { 0x231400, 1, RI_ALL_ONLINE },
+	{ 0x231440, 1, RI_E1HE2_ONLINE }, { 0x231480, 1, RI_E1HE2_ONLINE },
+	{ 0x2314c0, 1, RI_E1HE2_ONLINE }, { 0x231800, 128, RI_ALL_OFFLINE },
+	{ 0x231c00, 128, RI_ALL_OFFLINE }, { 0x232000, 1, RI_ALL_ONLINE },
+	{ 0x232400, 1, RI_E1HE2_ONLINE }, { 0x232404, 5631, RI_E2_OFFLINE },
+	{ 0x238000, 1, RI_ALL_ONLINE }, { 0x238040, 1, RI_ALL_ONLINE },
+	{ 0x238080, 1, RI_ALL_ONLINE }, { 0x2380c0, 1, RI_ALL_ONLINE },
+	{ 0x238100, 1, RI_ALL_ONLINE }, { 0x238140, 1, RI_ALL_ONLINE },
+	{ 0x238180, 1, RI_ALL_ONLINE }, { 0x2381c0, 1, RI_ALL_ONLINE },
+	{ 0x238200, 1, RI_ALL_ONLINE }, { 0x238240, 1, RI_ALL_ONLINE },
+	{ 0x238280, 1, RI_ALL_ONLINE }, { 0x2382c0, 1, RI_ALL_ONLINE },
+	{ 0x238300, 1, RI_ALL_ONLINE }, { 0x238340, 1, RI_ALL_ONLINE },
+	{ 0x238380, 1, RI_ALL_ONLINE }, { 0x2383c0, 1, RI_ALL_ONLINE },
+	{ 0x238400, 1, RI_ALL_ONLINE }, { 0x238440, 1, RI_ALL_ONLINE },
+	{ 0x238480, 1, RI_ALL_ONLINE }, { 0x2384c0, 1, RI_ALL_ONLINE },
+	{ 0x238500, 1, RI_ALL_ONLINE }, { 0x238540, 1, RI_ALL_ONLINE },
+	{ 0x238580, 1, RI_ALL_ONLINE }, { 0x2385c0, 19, RI_E2_ONLINE },
+	{ 0x238800, 1, RI_ALL_ONLINE }, { 0x238840, 1, RI_ALL_ONLINE },
+	{ 0x238880, 1, RI_ALL_ONLINE }, { 0x2388c0, 1, RI_ALL_ONLINE },
+	{ 0x238900, 1, RI_ALL_ONLINE }, { 0x238940, 1, RI_ALL_ONLINE },
+	{ 0x238980, 1, RI_ALL_ONLINE }, { 0x2389c0, 1, RI_ALL_ONLINE },
+	{ 0x238a00, 1, RI_ALL_ONLINE }, { 0x238a40, 1, RI_ALL_ONLINE },
+	{ 0x238a80, 1, RI_ALL_ONLINE }, { 0x238ac0, 1, RI_ALL_ONLINE },
+	{ 0x238b00, 1, RI_ALL_ONLINE }, { 0x238b40, 1, RI_ALL_ONLINE },
+	{ 0x238b80, 1, RI_ALL_ONLINE }, { 0x238bc0, 1, RI_ALL_ONLINE },
+	{ 0x238c00, 1, RI_ALL_ONLINE }, { 0x238c40, 1, RI_ALL_ONLINE },
+	{ 0x238c80, 1, RI_ALL_ONLINE }, { 0x238cc0, 1, RI_ALL_ONLINE },
+	{ 0x238cc4, 1, RI_E2_ONLINE }, { 0x238d00, 1, RI_ALL_ONLINE },
+	{ 0x238d40, 1, RI_ALL_ONLINE }, { 0x238d80, 1, RI_ALL_ONLINE },
+	{ 0x238dc0, 1, RI_ALL_ONLINE }, { 0x238e00, 1, RI_ALL_ONLINE },
+	{ 0x238e40, 1, RI_ALL_ONLINE }, { 0x238e80, 1, RI_ALL_ONLINE },
+	{ 0x238e84, 1, RI_E2_ONLINE }, { 0x238ec0, 1, RI_E1HE2_ONLINE },
+	{ 0x238f00, 1, RI_E1HE2_ONLINE }, { 0x238f40, 1, RI_E1HE2_ONLINE },
+	{ 0x238f80, 1, RI_E1HE2_ONLINE }, { 0x238fc0, 1, RI_E1HE2_ONLINE },
+	{ 0x238fc4, 2, RI_E2_ONLINE }, { 0x238fd0, 6, RI_E2_ONLINE },
+	{ 0x239000, 1, RI_E2_ONLINE }, { 0x239040, 3, RI_E2_ONLINE },
+	{ 0x240000, 2, RI_ALL_ONLINE }, { 0x280000, 65, RI_ALL_ONLINE },
+	{ 0x28014c, 2, RI_E1HE2_ONLINE }, { 0x280200, 58, RI_ALL_ONLINE },
+	{ 0x280340, 4, RI_ALL_ONLINE }, { 0x280380, 1, RI_E2_ONLINE },
+	{ 0x280388, 1, RI_E2_ONLINE }, { 0x280390, 1, RI_E2_ONLINE },
+	{ 0x280398, 1, RI_E2_ONLINE }, { 0x2803a0, 1, RI_E2_ONLINE },
+	{ 0x2803a8, 2, RI_E2_ONLINE }, { 0x280400, 1, RI_ALL_ONLINE },
+	{ 0x280404, 255, RI_E1E1H_OFFLINE }, { 0x282000, 4, RI_ALL_ONLINE },
+	{ 0x282010, 2044, RI_ALL_OFFLINE }, { 0x2a0000, 1, RI_ALL_ONLINE },
+	{ 0x2a0004, 5631, RI_ALL_OFFLINE }, { 0x2a5800, 2560, RI_E1HE2_OFFLINE},
+	{ 0x2a8000, 1, RI_ALL_ONLINE }, { 0x2a8004, 8191, RI_E1HE2_OFFLINE },
+	{ 0x2b0000, 1, RI_ALL_ONLINE }, { 0x2b0004, 15, RI_E1H_OFFLINE },
+	{ 0x2b0040, 1, RI_E1HE2_ONLINE }, { 0x2b0044, 239, RI_E1H_OFFLINE },
+	{ 0x2b0400, 1, RI_ALL_ONLINE }, { 0x2b0404, 255, RI_E1H_OFFLINE },
+	{ 0x2b0800, 1, RI_ALL_ONLINE }, { 0x2b0840, 1, RI_E1HE2_ONLINE },
+	{ 0x2b0c00, 1, RI_ALL_ONLINE }, { 0x2b1000, 1, RI_ALL_ONLINE },
+	{ 0x2b1040, 1, RI_E1HE2_ONLINE }, { 0x2b1400, 1, RI_ALL_ONLINE },
+	{ 0x2b1440, 1, RI_E1HE2_ONLINE }, { 0x2b1480, 1, RI_E1HE2_ONLINE },
+	{ 0x2b14c0, 1, RI_E1HE2_ONLINE }, { 0x2b1800, 128, RI_ALL_OFFLINE },
+	{ 0x2b1c00, 128, RI_ALL_OFFLINE }, { 0x2b2000, 1, RI_ALL_ONLINE },
+	{ 0x2b2400, 1, RI_E1HE2_ONLINE }, { 0x2b2404, 5631, RI_E2_OFFLINE },
+	{ 0x2b8000, 1, RI_ALL_ONLINE }, { 0x2b8040, 1, RI_ALL_ONLINE },
+	{ 0x2b8080, 1, RI_ALL_ONLINE }, { 0x2b80c0, 1, RI_ALL_ONLINE },
+	{ 0x2b8100, 1, RI_ALL_ONLINE }, { 0x2b8140, 1, RI_ALL_ONLINE },
+	{ 0x2b8180, 1, RI_ALL_ONLINE }, { 0x2b81c0, 1, RI_ALL_ONLINE },
+	{ 0x2b8200, 1, RI_ALL_ONLINE }, { 0x2b8240, 1, RI_ALL_ONLINE },
+	{ 0x2b8280, 1, RI_ALL_ONLINE }, { 0x2b82c0, 1, RI_ALL_ONLINE },
+	{ 0x2b8300, 1, RI_ALL_ONLINE }, { 0x2b8340, 1, RI_ALL_ONLINE },
+	{ 0x2b8380, 1, RI_ALL_ONLINE }, { 0x2b83c0, 1, RI_ALL_ONLINE },
+	{ 0x2b8400, 1, RI_ALL_ONLINE }, { 0x2b8440, 1, RI_ALL_ONLINE },
+	{ 0x2b8480, 1, RI_ALL_ONLINE }, { 0x2b84c0, 1, RI_ALL_ONLINE },
+	{ 0x2b8500, 1, RI_ALL_ONLINE }, { 0x2b8540, 1, RI_ALL_ONLINE },
+	{ 0x2b8580, 1, RI_ALL_ONLINE }, { 0x2b85c0, 19, RI_E2_ONLINE },
+	{ 0x2b8800, 1, RI_ALL_ONLINE }, { 0x2b8840, 1, RI_ALL_ONLINE },
+	{ 0x2b8880, 1, RI_ALL_ONLINE }, { 0x2b88c0, 1, RI_ALL_ONLINE },
+	{ 0x2b8900, 1, RI_ALL_ONLINE }, { 0x2b8940, 1, RI_ALL_ONLINE },
+	{ 0x2b8980, 1, RI_ALL_ONLINE }, { 0x2b89c0, 1, RI_ALL_ONLINE },
+	{ 0x2b8a00, 1, RI_ALL_ONLINE }, { 0x2b8a40, 1, RI_ALL_ONLINE },
+	{ 0x2b8a80, 1, RI_ALL_ONLINE }, { 0x2b8ac0, 1, RI_ALL_ONLINE },
+	{ 0x2b8b00, 1, RI_ALL_ONLINE }, { 0x2b8b40, 1, RI_ALL_ONLINE },
+	{ 0x2b8b80, 1, RI_ALL_ONLINE }, { 0x2b8bc0, 1, RI_ALL_ONLINE },
+	{ 0x2b8c00, 1, RI_ALL_ONLINE }, { 0x2b8c40, 1, RI_ALL_ONLINE },
+	{ 0x2b8c80, 1, RI_ALL_ONLINE }, { 0x2b8cc0, 1, RI_ALL_ONLINE },
+	{ 0x2b8cc4, 1, RI_E2_ONLINE }, { 0x2b8d00, 1, RI_ALL_ONLINE },
+	{ 0x2b8d40, 1, RI_ALL_ONLINE }, { 0x2b8d80, 1, RI_ALL_ONLINE },
+	{ 0x2b8dc0, 1, RI_ALL_ONLINE }, { 0x2b8e00, 1, RI_ALL_ONLINE },
+	{ 0x2b8e40, 1, RI_ALL_ONLINE }, { 0x2b8e80, 1, RI_ALL_ONLINE },
+	{ 0x2b8e84, 1, RI_E2_ONLINE }, { 0x2b8ec0, 1, RI_E1HE2_ONLINE },
+	{ 0x2b8f00, 1, RI_E1HE2_ONLINE }, { 0x2b8f40, 1, RI_E1HE2_ONLINE },
+	{ 0x2b8f80, 1, RI_E1HE2_ONLINE }, { 0x2b8fc0, 1, RI_E1HE2_ONLINE },
+	{ 0x2b8fc4, 2, RI_E2_ONLINE }, { 0x2b8fd0, 6, RI_E2_ONLINE },
+	{ 0x2b9000, 1, RI_E2_ONLINE }, { 0x2b9040, 3, RI_E2_ONLINE },
+	{ 0x2b9400, 14, RI_E2_ONLINE }, { 0x2b943c, 19, RI_E2_ONLINE },
+	{ 0x2b9490, 10, RI_E2_ONLINE }, { 0x2c0000, 2, RI_ALL_ONLINE },
+	{ 0x300000, 65, RI_ALL_ONLINE }, { 0x30014c, 2, RI_E1HE2_ONLINE },
 	{ 0x300200, 58, RI_ALL_ONLINE }, { 0x300340, 4, RI_ALL_ONLINE },
-	{ 0x300400, 1, RI_ALL_ONLINE }, { 0x300404, 255, RI_ALL_OFFLINE },
+	{ 0x300380, 1, RI_E2_ONLINE }, { 0x300388, 1, RI_E2_ONLINE },
+	{ 0x300390, 1, RI_E2_ONLINE }, { 0x300398, 1, RI_E2_ONLINE },
+	{ 0x3003a0, 1, RI_E2_ONLINE }, { 0x3003a8, 2, RI_E2_ONLINE },
+	{ 0x300400, 1, RI_ALL_ONLINE }, { 0x300404, 255, RI_E1E1H_OFFLINE },
 	{ 0x302000, 4, RI_ALL_ONLINE }, { 0x302010, 2044, RI_ALL_OFFLINE },
-	{ 0x320000, 1, RI_ALL_ONLINE }, { 0x320004, 1023, RI_ALL_OFFLINE },
-	{ 0x321000, 1, RI_ALL_ONLINE }, { 0x321004, 4607, RI_ALL_OFFLINE },
-	{ 0x325800, 2560, RI_E1H_OFFLINE }, { 0x328000, 64, RI_ALL_OFFLINE },
-	{ 0x328100, 536, RI_E1H_OFFLINE }, { 0x328960, 1, RI_E1H_ONLINE },
-	{ 0x328964, 8103, RI_E1H_OFFLINE }, { 0x331800, 128, RI_ALL_OFFLINE },
-	{ 0x331c00, 128, RI_ALL_OFFLINE }, { 0x332000, 1, RI_ALL_OFFLINE },
-	{ 0x332400, 64, RI_E1H_OFFLINE }, { 0x338200, 1, RI_ALL_ONLINE },
+	{ 0x320000, 1, RI_ALL_ONLINE }, { 0x320004, 5631, RI_ALL_OFFLINE },
+	{ 0x325800, 2560, RI_E1HE2_OFFLINE }, { 0x328000, 1, RI_ALL_ONLINE },
+	{ 0x328004, 8191, RI_E1HE2_OFFLINE }, { 0x330000, 1, RI_ALL_ONLINE },
+	{ 0x330004, 15, RI_E1H_OFFLINE }, { 0x330040, 1, RI_E1HE2_ONLINE },
+	{ 0x330044, 239, RI_E1H_OFFLINE }, { 0x330400, 1, RI_ALL_ONLINE },
+	{ 0x330404, 255, RI_E1H_OFFLINE }, { 0x330800, 1, RI_ALL_ONLINE },
+	{ 0x330840, 1, RI_E1HE2_ONLINE }, { 0x330c00, 1, RI_ALL_ONLINE },
+	{ 0x331000, 1, RI_ALL_ONLINE }, { 0x331040, 1, RI_E1HE2_ONLINE },
+	{ 0x331400, 1, RI_ALL_ONLINE }, { 0x331440, 1, RI_E1HE2_ONLINE },
+	{ 0x331480, 1, RI_E1HE2_ONLINE }, { 0x3314c0, 1, RI_E1HE2_ONLINE },
+	{ 0x331800, 128, RI_ALL_OFFLINE }, { 0x331c00, 128, RI_ALL_OFFLINE },
+	{ 0x332000, 1, RI_ALL_ONLINE }, { 0x332400, 1, RI_E1HE2_ONLINE },
+	{ 0x332404, 5631, RI_E2_OFFLINE }, { 0x338000, 1, RI_ALL_ONLINE },
+	{ 0x338040, 1, RI_ALL_ONLINE }, { 0x338080, 1, RI_ALL_ONLINE },
+	{ 0x3380c0, 1, RI_ALL_ONLINE }, { 0x338100, 1, RI_ALL_ONLINE },
+	{ 0x338140, 1, RI_ALL_ONLINE }, { 0x338180, 1, RI_ALL_ONLINE },
+	{ 0x3381c0, 1, RI_ALL_ONLINE }, { 0x338200, 1, RI_ALL_ONLINE },
 	{ 0x338240, 1, RI_ALL_ONLINE }, { 0x338280, 1, RI_ALL_ONLINE },
-	{ 0x3382c0, 1, RI_ALL_ONLINE }, { 0x338a00, 1, RI_ALL_ONLINE },
-	{ 0x338a80, 1, RI_ALL_ONLINE }, { 0x340000, 2, RI_ALL_ONLINE }
+	{ 0x3382c0, 1, RI_ALL_ONLINE }, { 0x338300, 1, RI_ALL_ONLINE },
+	{ 0x338340, 1, RI_ALL_ONLINE }, { 0x338380, 1, RI_ALL_ONLINE },
+	{ 0x3383c0, 1, RI_ALL_ONLINE }, { 0x338400, 1, RI_ALL_ONLINE },
+	{ 0x338440, 1, RI_ALL_ONLINE }, { 0x338480, 1, RI_ALL_ONLINE },
+	{ 0x3384c0, 1, RI_ALL_ONLINE }, { 0x338500, 1, RI_ALL_ONLINE },
+	{ 0x338540, 1, RI_ALL_ONLINE }, { 0x338580, 1, RI_ALL_ONLINE },
+	{ 0x3385c0, 19, RI_E2_ONLINE }, { 0x338800, 1, RI_ALL_ONLINE },
+	{ 0x338840, 1, RI_ALL_ONLINE }, { 0x338880, 1, RI_ALL_ONLINE },
+	{ 0x3388c0, 1, RI_ALL_ONLINE }, { 0x338900, 1, RI_ALL_ONLINE },
+	{ 0x338940, 1, RI_ALL_ONLINE }, { 0x338980, 1, RI_ALL_ONLINE },
+	{ 0x3389c0, 1, RI_ALL_ONLINE }, { 0x338a00, 1, RI_ALL_ONLINE },
+	{ 0x338a40, 1, RI_ALL_ONLINE }, { 0x338a80, 1, RI_ALL_ONLINE },
+	{ 0x338ac0, 1, RI_ALL_ONLINE }, { 0x338b00, 1, RI_ALL_ONLINE },
+	{ 0x338b40, 1, RI_ALL_ONLINE }, { 0x338b80, 1, RI_ALL_ONLINE },
+	{ 0x338bc0, 1, RI_ALL_ONLINE }, { 0x338c00, 1, RI_ALL_ONLINE },
+	{ 0x338c40, 1, RI_ALL_ONLINE }, { 0x338c80, 1, RI_ALL_ONLINE },
+	{ 0x338cc0, 1, RI_ALL_ONLINE }, { 0x338cc4, 1, RI_E2_ONLINE },
+	{ 0x338d00, 1, RI_ALL_ONLINE }, { 0x338d40, 1, RI_ALL_ONLINE },
+	{ 0x338d80, 1, RI_ALL_ONLINE }, { 0x338dc0, 1, RI_ALL_ONLINE },
+	{ 0x338e00, 1, RI_ALL_ONLINE }, { 0x338e40, 1, RI_ALL_ONLINE },
+	{ 0x338e80, 1, RI_ALL_ONLINE }, { 0x338e84, 1, RI_E2_ONLINE },
+	{ 0x338ec0, 1, RI_E1HE2_ONLINE }, { 0x338f00, 1, RI_E1HE2_ONLINE },
+	{ 0x338f40, 1, RI_E1HE2_ONLINE }, { 0x338f80, 1, RI_E1HE2_ONLINE },
+	{ 0x338fc0, 1, RI_E1HE2_ONLINE }, { 0x338fc4, 2, RI_E2_ONLINE },
+	{ 0x338fd0, 6, RI_E2_ONLINE }, { 0x339000, 1, RI_E2_ONLINE },
+	{ 0x339040, 3, RI_E2_ONLINE }, { 0x340000, 2, RI_ALL_ONLINE },
 };
 
-
-#define IDLE_REGS_COUNT			277
+#define IDLE_REGS_COUNT			237
 static const struct reg_addr idle_addrs[IDLE_REGS_COUNT] = {
-	{ 0x2114, 1, RI_ALL_ONLINE }, { 0x2120, 1, RI_ALL_ONLINE },
-	{ 0x212c, 4, RI_ALL_ONLINE }, { 0x2814, 1, RI_ALL_ONLINE },
-	{ 0x281c, 2, RI_ALL_ONLINE }, { 0xa38c, 1, RI_ALL_ONLINE },
+	{ 0x2104, 1, RI_ALL_ONLINE }, { 0x2110, 2, RI_ALL_ONLINE },
+	{ 0x211c, 8, RI_ALL_ONLINE }, { 0x2814, 1, RI_ALL_ONLINE },
+	{ 0x281c, 2, RI_ALL_ONLINE }, { 0x2854, 1, RI_ALL_ONLINE },
+	{ 0x285c, 1, RI_ALL_ONLINE }, { 0x9010, 7, RI_E2_ONLINE },
+	{ 0x9030, 1, RI_E2_ONLINE }, { 0x9068, 16, RI_E2_ONLINE },
+	{ 0x9230, 2, RI_E2_ONLINE }, { 0x9244, 1, RI_E2_ONLINE },
+	{ 0x9298, 1, RI_E2_ONLINE }, { 0x92a8, 1, RI_E2_ONLINE },
+	{ 0xa38c, 1, RI_ALL_ONLINE }, { 0xa3c4, 1, RI_E1HE2_ONLINE },
 	{ 0xa408, 1, RI_ALL_ONLINE }, { 0xa42c, 12, RI_ALL_ONLINE },
-	{ 0xa600, 5, RI_E1H_ONLINE }, { 0xa618, 1, RI_E1H_ONLINE },
-	{ 0xc09c, 1, RI_ALL_ONLINE }, { 0x103b0, 1, RI_ALL_ONLINE },
-	{ 0x103c0, 1, RI_ALL_ONLINE }, { 0x103d0, 1, RI_E1H_ONLINE },
-	{ 0x2021c, 11, RI_ALL_ONLINE }, { 0x202a8, 1, RI_ALL_ONLINE },
-	{ 0x202b8, 1, RI_ALL_ONLINE }, { 0x20404, 1, RI_ALL_ONLINE },
-	{ 0x2040c, 2, RI_ALL_ONLINE }, { 0x2041c, 2, RI_ALL_ONLINE },
-	{ 0x40154, 14, RI_ALL_ONLINE }, { 0x40198, 1, RI_ALL_ONLINE },
-	{ 0x404ac, 1, RI_ALL_ONLINE }, { 0x404bc, 1, RI_ALL_ONLINE },
-	{ 0x42290, 1, RI_ALL_ONLINE }, { 0x422a0, 1, RI_ALL_ONLINE },
-	{ 0x422b0, 1, RI_ALL_ONLINE }, { 0x42548, 1, RI_ALL_ONLINE },
-	{ 0x42550, 1, RI_ALL_ONLINE }, { 0x42558, 1, RI_ALL_ONLINE },
-	{ 0x50160, 8, RI_ALL_ONLINE }, { 0x501d0, 1, RI_ALL_ONLINE },
-	{ 0x501e0, 1, RI_ALL_ONLINE }, { 0x50204, 1, RI_ALL_ONLINE },
-	{ 0x5020c, 2, RI_ALL_ONLINE }, { 0x5021c, 1, RI_ALL_ONLINE },
-	{ 0x60090, 1, RI_ALL_ONLINE }, { 0x6011c, 1, RI_ALL_ONLINE },
-	{ 0x6012c, 1, RI_ALL_ONLINE }, { 0xc101c, 1, RI_ALL_ONLINE },
-	{ 0xc102c, 1, RI_ALL_ONLINE }, { 0xc2290, 1, RI_ALL_ONLINE },
-	{ 0xc22a0, 1, RI_ALL_ONLINE }, { 0xc22b0, 1, RI_ALL_ONLINE },
-	{ 0xc2548, 1, RI_ALL_ONLINE }, { 0xc2550, 1, RI_ALL_ONLINE },
-	{ 0xc2558, 1, RI_ALL_ONLINE }, { 0xc4294, 1, RI_ALL_ONLINE },
-	{ 0xc42a4, 1, RI_ALL_ONLINE }, { 0xc42b4, 1, RI_ALL_ONLINE },
-	{ 0xc4550, 1, RI_ALL_ONLINE }, { 0xc4558, 1, RI_ALL_ONLINE },
-	{ 0xc4560, 1, RI_ALL_ONLINE }, { 0xd016c, 8, RI_ALL_ONLINE },
-	{ 0xd01d8, 1, RI_ALL_ONLINE }, { 0xd01e8, 1, RI_ALL_ONLINE },
-	{ 0xd0204, 1, RI_ALL_ONLINE }, { 0xd020c, 3, RI_ALL_ONLINE },
-	{ 0xe0154, 8, RI_ALL_ONLINE }, { 0xe01c8, 1, RI_ALL_ONLINE },
-	{ 0xe01d8, 1, RI_ALL_ONLINE }, { 0xe0204, 1, RI_ALL_ONLINE },
-	{ 0xe020c, 2, RI_ALL_ONLINE }, { 0xe021c, 2, RI_ALL_ONLINE },
-	{ 0x101014, 1, RI_ALL_ONLINE }, { 0x101030, 1, RI_ALL_ONLINE },
-	{ 0x101040, 1, RI_ALL_ONLINE }, { 0x102058, 1, RI_ALL_ONLINE },
-	{ 0x102080, 16, RI_ALL_ONLINE }, { 0x103004, 2, RI_ALL_ONLINE },
-	{ 0x103068, 1, RI_ALL_ONLINE }, { 0x103078, 1, RI_ALL_ONLINE },
-	{ 0x103088, 1, RI_ALL_ONLINE }, { 0x10309c, 2, RI_E1H_ONLINE },
+	{ 0xa600, 5, RI_E1HE2_ONLINE }, { 0xa618, 1, RI_E1HE2_ONLINE },
+	{ 0xa714, 1, RI_E2_ONLINE }, { 0xa720, 1, RI_E2_ONLINE },
+	{ 0xa750, 1, RI_E2_ONLINE }, { 0xc09c, 1, RI_E1E1H_ONLINE },
+	{ 0x103b0, 1, RI_ALL_ONLINE }, { 0x103c0, 1, RI_ALL_ONLINE },
+	{ 0x103d0, 1, RI_E1H_ONLINE }, { 0x183bc, 1, RI_E2_ONLINE },
+	{ 0x183cc, 1, RI_E2_ONLINE }, { 0x2021c, 11, RI_ALL_ONLINE },
+	{ 0x202a8, 1, RI_ALL_ONLINE }, { 0x202b8, 1, RI_ALL_ONLINE },
+	{ 0x20404, 1, RI_ALL_ONLINE }, { 0x2040c, 2, RI_ALL_ONLINE },
+	{ 0x2041c, 2, RI_ALL_ONLINE }, { 0x40154, 14, RI_ALL_ONLINE },
+	{ 0x40198, 1, RI_ALL_ONLINE }, { 0x404ac, 1, RI_ALL_ONLINE },
+	{ 0x404bc, 1, RI_ALL_ONLINE }, { 0x42290, 1, RI_ALL_ONLINE },
+	{ 0x422a0, 1, RI_ALL_ONLINE }, { 0x422b0, 1, RI_ALL_ONLINE },
+	{ 0x42548, 1, RI_ALL_ONLINE }, { 0x42550, 1, RI_ALL_ONLINE },
+	{ 0x42558, 1, RI_ALL_ONLINE }, { 0x50160, 8, RI_ALL_ONLINE },
+	{ 0x501d0, 1, RI_ALL_ONLINE }, { 0x501e0, 1, RI_ALL_ONLINE },
+	{ 0x50204, 1, RI_ALL_ONLINE }, { 0x5020c, 2, RI_ALL_ONLINE },
+	{ 0x5021c, 1, RI_ALL_ONLINE }, { 0x60090, 1, RI_ALL_ONLINE },
+	{ 0x6011c, 1, RI_ALL_ONLINE }, { 0x6012c, 1, RI_ALL_ONLINE },
+	{ 0xc101c, 1, RI_ALL_ONLINE }, { 0xc102c, 1, RI_ALL_ONLINE },
+	{ 0xc2290, 1, RI_ALL_ONLINE }, { 0xc22a0, 1, RI_ALL_ONLINE },
+	{ 0xc22b0, 1, RI_ALL_ONLINE }, { 0xc2548, 1, RI_ALL_ONLINE },
+	{ 0xc2550, 1, RI_ALL_ONLINE }, { 0xc2558, 1, RI_ALL_ONLINE },
+	{ 0xc4294, 1, RI_ALL_ONLINE }, { 0xc42a4, 1, RI_ALL_ONLINE },
+	{ 0xc42b4, 1, RI_ALL_ONLINE }, { 0xc4550, 1, RI_ALL_ONLINE },
+	{ 0xc4558, 1, RI_ALL_ONLINE }, { 0xc4560, 1, RI_ALL_ONLINE },
+	{ 0xd016c, 8, RI_ALL_ONLINE }, { 0xd01d8, 1, RI_ALL_ONLINE },
+	{ 0xd01e8, 1, RI_ALL_ONLINE }, { 0xd0204, 1, RI_ALL_ONLINE },
+	{ 0xd020c, 3, RI_ALL_ONLINE }, { 0xe0154, 8, RI_ALL_ONLINE },
+	{ 0xe01c8, 1, RI_ALL_ONLINE }, { 0xe01d8, 1, RI_ALL_ONLINE },
+	{ 0xe0204, 1, RI_ALL_ONLINE }, { 0xe020c, 2, RI_ALL_ONLINE },
+	{ 0xe021c, 2, RI_ALL_ONLINE }, { 0x101014, 1, RI_ALL_ONLINE },
+	{ 0x101030, 1, RI_ALL_ONLINE }, { 0x101040, 1, RI_ALL_ONLINE },
+	{ 0x102058, 1, RI_ALL_ONLINE }, { 0x102080, 16, RI_ALL_ONLINE },
+	{ 0x103004, 2, RI_ALL_ONLINE }, { 0x103068, 1, RI_ALL_ONLINE },
+	{ 0x103078, 1, RI_ALL_ONLINE }, { 0x103088, 1, RI_ALL_ONLINE },
+	{ 0x10309c, 2, RI_E1HE2_ONLINE }, { 0x1030b8, 2, RI_E2_ONLINE },
+	{ 0x1030cc, 1, RI_E2_ONLINE }, { 0x1030e0, 1, RI_E2_ONLINE },
 	{ 0x104004, 1, RI_ALL_ONLINE }, { 0x104018, 1, RI_ALL_ONLINE },
 	{ 0x104020, 1, RI_ALL_ONLINE }, { 0x10403c, 1, RI_ALL_ONLINE },
 	{ 0x1040fc, 1, RI_ALL_ONLINE }, { 0x10410c, 1, RI_ALL_ONLINE },
 	{ 0x104400, 64, RI_ALL_ONLINE }, { 0x104800, 64, RI_ALL_ONLINE },
-	{ 0x105000, 3, RI_ALL_ONLINE }, { 0x105010, 3, RI_ALL_ONLINE },
-	{ 0x105020, 3, RI_ALL_ONLINE }, { 0x105030, 3, RI_ALL_ONLINE },
-	{ 0x105040, 3, RI_ALL_ONLINE }, { 0x105050, 3, RI_ALL_ONLINE },
-	{ 0x105060, 3, RI_ALL_ONLINE }, { 0x105070, 3, RI_ALL_ONLINE },
-	{ 0x105080, 3, RI_ALL_ONLINE }, { 0x105090, 3, RI_ALL_ONLINE },
-	{ 0x1050a0, 3, RI_ALL_ONLINE }, { 0x1050b0, 3, RI_ALL_ONLINE },
-	{ 0x1050c0, 3, RI_ALL_ONLINE }, { 0x1050d0, 3, RI_ALL_ONLINE },
-	{ 0x1050e0, 3, RI_ALL_ONLINE }, { 0x1050f0, 3, RI_ALL_ONLINE },
-	{ 0x105100, 3, RI_ALL_ONLINE }, { 0x105110, 3, RI_ALL_ONLINE },
-	{ 0x105120, 3, RI_ALL_ONLINE }, { 0x105130, 3, RI_ALL_ONLINE },
-	{ 0x105140, 3, RI_ALL_ONLINE }, { 0x105150, 3, RI_ALL_ONLINE },
-	{ 0x105160, 3, RI_ALL_ONLINE }, { 0x105170, 3, RI_ALL_ONLINE },
-	{ 0x105180, 3, RI_ALL_ONLINE }, { 0x105190, 3, RI_ALL_ONLINE },
-	{ 0x1051a0, 3, RI_ALL_ONLINE }, { 0x1051b0, 3, RI_ALL_ONLINE },
-	{ 0x1051c0, 3, RI_ALL_ONLINE }, { 0x1051d0, 3, RI_ALL_ONLINE },
-	{ 0x1051e0, 3, RI_ALL_ONLINE }, { 0x1051f0, 3, RI_ALL_ONLINE },
-	{ 0x105200, 3, RI_ALL_ONLINE }, { 0x105210, 3, RI_ALL_ONLINE },
-	{ 0x105220, 3, RI_ALL_ONLINE }, { 0x105230, 3, RI_ALL_ONLINE },
-	{ 0x105240, 3, RI_ALL_ONLINE }, { 0x105250, 3, RI_ALL_ONLINE },
-	{ 0x105260, 3, RI_ALL_ONLINE }, { 0x105270, 3, RI_ALL_ONLINE },
-	{ 0x105280, 3, RI_ALL_ONLINE }, { 0x105290, 3, RI_ALL_ONLINE },
-	{ 0x1052a0, 3, RI_ALL_ONLINE }, { 0x1052b0, 3, RI_ALL_ONLINE },
-	{ 0x1052c0, 3, RI_ALL_ONLINE }, { 0x1052d0, 3, RI_ALL_ONLINE },
-	{ 0x1052e0, 3, RI_ALL_ONLINE }, { 0x1052f0, 3, RI_ALL_ONLINE },
-	{ 0x105300, 3, RI_ALL_ONLINE }, { 0x105310, 3, RI_ALL_ONLINE },
-	{ 0x105320, 3, RI_ALL_ONLINE }, { 0x105330, 3, RI_ALL_ONLINE },
-	{ 0x105340, 3, RI_ALL_ONLINE }, { 0x105350, 3, RI_ALL_ONLINE },
-	{ 0x105360, 3, RI_ALL_ONLINE }, { 0x105370, 3, RI_ALL_ONLINE },
-	{ 0x105380, 3, RI_ALL_ONLINE }, { 0x105390, 3, RI_ALL_ONLINE },
-	{ 0x1053a0, 3, RI_ALL_ONLINE }, { 0x1053b0, 3, RI_ALL_ONLINE },
-	{ 0x1053c0, 3, RI_ALL_ONLINE }, { 0x1053d0, 3, RI_ALL_ONLINE },
-	{ 0x1053e0, 3, RI_ALL_ONLINE }, { 0x1053f0, 3, RI_ALL_ONLINE },
-	{ 0x108094, 1, RI_ALL_ONLINE }, { 0x1201b0, 2, RI_ALL_ONLINE },
-	{ 0x12032c, 1, RI_ALL_ONLINE }, { 0x12036c, 3, RI_ALL_ONLINE },
-	{ 0x120408, 2, RI_ALL_ONLINE }, { 0x120414, 15, RI_ALL_ONLINE },
-	{ 0x120478, 2, RI_ALL_ONLINE }, { 0x12052c, 1, RI_ALL_ONLINE },
-	{ 0x120564, 3, RI_ALL_ONLINE }, { 0x12057c, 1, RI_ALL_ONLINE },
-	{ 0x12058c, 1, RI_ALL_ONLINE }, { 0x120608, 1, RI_E1H_ONLINE },
-	{ 0x120808, 1, RI_E1_ONLINE }, { 0x12080c, 2, RI_ALL_ONLINE },
+	{ 0x105000, 256, RI_ALL_ONLINE }, { 0x108094, 1, RI_E1E1H_ONLINE },
+	{ 0x1201b0, 2, RI_ALL_ONLINE }, { 0x12032c, 1, RI_ALL_ONLINE },
+	{ 0x12036c, 3, RI_ALL_ONLINE }, { 0x120408, 2, RI_ALL_ONLINE },
+	{ 0x120414, 15, RI_ALL_ONLINE }, { 0x120478, 2, RI_ALL_ONLINE },
+	{ 0x12052c, 1, RI_ALL_ONLINE }, { 0x120564, 3, RI_ALL_ONLINE },
+	{ 0x12057c, 1, RI_ALL_ONLINE }, { 0x12058c, 1, RI_ALL_ONLINE },
+	{ 0x120608, 1, RI_E1HE2_ONLINE }, { 0x120738, 1, RI_E2_ONLINE },
+	{ 0x120778, 2, RI_E2_ONLINE }, { 0x120808, 3, RI_ALL_ONLINE },
 	{ 0x120818, 1, RI_ALL_ONLINE }, { 0x120820, 1, RI_ALL_ONLINE },
 	{ 0x120828, 1, RI_ALL_ONLINE }, { 0x120830, 1, RI_ALL_ONLINE },
 	{ 0x120838, 1, RI_ALL_ONLINE }, { 0x120840, 1, RI_ALL_ONLINE },
@@ -462,48 +580,50 @@ static const struct reg_addr idle_addrs[IDLE_REGS_COUNT] = {
 	{ 0x1208d8, 1, RI_ALL_ONLINE }, { 0x1208e0, 1, RI_ALL_ONLINE },
 	{ 0x1208e8, 1, RI_ALL_ONLINE }, { 0x1208f0, 1, RI_ALL_ONLINE },
 	{ 0x1208f8, 1, RI_ALL_ONLINE }, { 0x120900, 1, RI_ALL_ONLINE },
-	{ 0x120908, 1, RI_ALL_ONLINE }, { 0x14005c, 2, RI_ALL_ONLINE },
-	{ 0x1400d0, 2, RI_ALL_ONLINE }, { 0x1400e0, 1, RI_ALL_ONLINE },
-	{ 0x1401c8, 1, RI_ALL_ONLINE }, { 0x140200, 6, RI_ALL_ONLINE },
-	{ 0x16101c, 1, RI_ALL_ONLINE }, { 0x16102c, 1, RI_ALL_ONLINE },
-	{ 0x164014, 2, RI_ALL_ONLINE }, { 0x1640f0, 1, RI_ALL_ONLINE },
-	{ 0x166290, 1, RI_ALL_ONLINE }, { 0x1662a0, 1, RI_ALL_ONLINE },
-	{ 0x1662b0, 1, RI_ALL_ONLINE }, { 0x166548, 1, RI_ALL_ONLINE },
-	{ 0x166550, 1, RI_ALL_ONLINE }, { 0x166558, 1, RI_ALL_ONLINE },
-	{ 0x168000, 1, RI_ALL_ONLINE }, { 0x168008, 1, RI_ALL_ONLINE },
-	{ 0x168010, 1, RI_ALL_ONLINE }, { 0x168018, 1, RI_ALL_ONLINE },
-	{ 0x168028, 2, RI_ALL_ONLINE }, { 0x168058, 4, RI_ALL_ONLINE },
-	{ 0x168070, 1, RI_ALL_ONLINE }, { 0x168238, 1, RI_ALL_ONLINE },
-	{ 0x1682d0, 2, RI_ALL_ONLINE }, { 0x1682e0, 1, RI_ALL_ONLINE },
-	{ 0x168300, 67, RI_ALL_ONLINE }, { 0x168410, 2, RI_ALL_ONLINE },
+	{ 0x120908, 1, RI_ALL_ONLINE }, { 0x120940, 5, RI_E2_ONLINE },
+	{ 0x130030, 1, RI_E2_ONLINE }, { 0x13004c, 3, RI_E2_ONLINE },
+	{ 0x130064, 2, RI_E2_ONLINE }, { 0x13009c, 1, RI_E2_ONLINE },
+	{ 0x130130, 1, RI_E2_ONLINE }, { 0x13016c, 1, RI_E2_ONLINE },
+	{ 0x130300, 1, RI_E2_ONLINE }, { 0x130480, 1, RI_E2_ONLINE },
+	{ 0x14005c, 2, RI_ALL_ONLINE }, { 0x1400d0, 2, RI_ALL_ONLINE },
+	{ 0x1400e0, 1, RI_ALL_ONLINE }, { 0x1401c8, 1, RI_ALL_ONLINE },
+	{ 0x140200, 6, RI_ALL_ONLINE }, { 0x16101c, 1, RI_ALL_ONLINE },
+	{ 0x16102c, 1, RI_ALL_ONLINE }, { 0x164014, 2, RI_ALL_ONLINE },
+	{ 0x1640f0, 1, RI_ALL_ONLINE }, { 0x166290, 1, RI_ALL_ONLINE },
+	{ 0x1662a0, 1, RI_ALL_ONLINE }, { 0x1662b0, 1, RI_ALL_ONLINE },
+	{ 0x166548, 1, RI_ALL_ONLINE }, { 0x166550, 1, RI_ALL_ONLINE },
+	{ 0x166558, 1, RI_ALL_ONLINE }, { 0x168000, 1, RI_ALL_ONLINE },
+	{ 0x168008, 1, RI_ALL_ONLINE }, { 0x168010, 1, RI_ALL_ONLINE },
+	{ 0x168018, 1, RI_ALL_ONLINE }, { 0x168028, 2, RI_ALL_ONLINE },
+	{ 0x168058, 4, RI_ALL_ONLINE }, { 0x168070, 1, RI_ALL_ONLINE },
+	{ 0x168238, 1, RI_ALL_ONLINE }, { 0x1682d0, 2, RI_ALL_ONLINE },
+	{ 0x1682e0, 1, RI_ALL_ONLINE }, { 0x168300, 2, RI_E1E1H_ONLINE },
+	{ 0x168308, 65, RI_ALL_ONLINE }, { 0x168410, 2, RI_ALL_ONLINE },
 	{ 0x168438, 1, RI_ALL_ONLINE }, { 0x168448, 1, RI_ALL_ONLINE },
 	{ 0x168a00, 128, RI_ALL_ONLINE }, { 0x16e200, 128, RI_E1H_ONLINE },
-	{ 0x16e404, 2, RI_E1H_ONLINE }, { 0x16e584, 70, RI_E1H_ONLINE },
-	{ 0x1700a4, 1, RI_ALL_ONLINE }, { 0x1700ac, 2, RI_ALL_ONLINE },
-	{ 0x1700c0, 1, RI_ALL_ONLINE }, { 0x170174, 1, RI_ALL_ONLINE },
-	{ 0x170184, 1, RI_ALL_ONLINE }, { 0x1800f4, 1, RI_ALL_ONLINE },
-	{ 0x180104, 1, RI_ALL_ONLINE }, { 0x180114, 1, RI_ALL_ONLINE },
-	{ 0x180124, 1, RI_ALL_ONLINE }, { 0x18026c, 1, RI_ALL_ONLINE },
-	{ 0x1802a0, 1, RI_ALL_ONLINE }, { 0x1a1000, 1, RI_ALL_ONLINE },
-	{ 0x1aa000, 1, RI_E1H_ONLINE }, { 0x1b8000, 1, RI_ALL_ONLINE },
-	{ 0x1b8040, 1, RI_ALL_ONLINE }, { 0x1b8080, 1, RI_ALL_ONLINE },
-	{ 0x1b80c0, 1, RI_ALL_ONLINE }, { 0x200104, 1, RI_ALL_ONLINE },
-	{ 0x200114, 1, RI_ALL_ONLINE }, { 0x200124, 1, RI_ALL_ONLINE },
-	{ 0x200134, 1, RI_ALL_ONLINE }, { 0x20026c, 1, RI_ALL_ONLINE },
-	{ 0x2002a0, 1, RI_ALL_ONLINE }, { 0x221000, 1, RI_ALL_ONLINE },
-	{ 0x227000, 1, RI_E1H_ONLINE }, { 0x238000, 1, RI_ALL_ONLINE },
-	{ 0x238040, 1, RI_ALL_ONLINE }, { 0x238080, 1, RI_ALL_ONLINE },
-	{ 0x2380c0, 1, RI_ALL_ONLINE }, { 0x280104, 1, RI_ALL_ONLINE },
-	{ 0x280114, 1, RI_ALL_ONLINE }, { 0x280124, 1, RI_ALL_ONLINE },
-	{ 0x280134, 1, RI_ALL_ONLINE }, { 0x28026c, 1, RI_ALL_ONLINE },
-	{ 0x2802a0, 1, RI_ALL_ONLINE }, { 0x2a1000, 1, RI_ALL_ONLINE },
-	{ 0x2a9000, 1, RI_E1H_ONLINE }, { 0x2b8000, 1, RI_ALL_ONLINE },
-	{ 0x2b8040, 1, RI_ALL_ONLINE }, { 0x2b8080, 1, RI_ALL_ONLINE },
-	{ 0x2b80c0, 1, RI_ALL_ONLINE }, { 0x300104, 1, RI_ALL_ONLINE },
+	{ 0x16e404, 2, RI_E1H_ONLINE }, { 0x16e584, 64, RI_E1H_ONLINE },
+	{ 0x16e684, 2, RI_E1HE2_ONLINE }, { 0x16e68c, 4, RI_E1H_ONLINE },
+	{ 0x16e6fc, 4, RI_E2_ONLINE }, { 0x1700a4, 1, RI_ALL_ONLINE },
+	{ 0x1700ac, 2, RI_ALL_ONLINE }, { 0x1700c0, 1, RI_ALL_ONLINE },
+	{ 0x170174, 1, RI_ALL_ONLINE }, { 0x170184, 1, RI_ALL_ONLINE },
+	{ 0x1800f4, 1, RI_ALL_ONLINE }, { 0x180104, 1, RI_ALL_ONLINE },
+	{ 0x180114, 1, RI_ALL_ONLINE }, { 0x180124, 1, RI_ALL_ONLINE },
+	{ 0x18026c, 1, RI_ALL_ONLINE }, { 0x1802a0, 1, RI_ALL_ONLINE },
+	{ 0x1b8000, 1, RI_ALL_ONLINE }, { 0x1b8040, 1, RI_ALL_ONLINE },
+	{ 0x1b8080, 1, RI_ALL_ONLINE }, { 0x1b80c0, 1, RI_ALL_ONLINE },
+	{ 0x200104, 1, RI_ALL_ONLINE }, { 0x200114, 1, RI_ALL_ONLINE },
+	{ 0x200124, 1, RI_ALL_ONLINE }, { 0x200134, 1, RI_ALL_ONLINE },
+	{ 0x20026c, 1, RI_ALL_ONLINE }, { 0x2002a0, 1, RI_ALL_ONLINE },
+	{ 0x238000, 1, RI_ALL_ONLINE }, { 0x238040, 1, RI_ALL_ONLINE },
+	{ 0x238080, 1, RI_ALL_ONLINE }, { 0x2380c0, 1, RI_ALL_ONLINE },
+	{ 0x280104, 1, RI_ALL_ONLINE }, { 0x280114, 1, RI_ALL_ONLINE },
+	{ 0x280124, 1, RI_ALL_ONLINE }, { 0x280134, 1, RI_ALL_ONLINE },
+	{ 0x28026c, 1, RI_ALL_ONLINE }, { 0x2802a0, 1, RI_ALL_ONLINE },
+	{ 0x2b8000, 1, RI_ALL_ONLINE }, { 0x2b8040, 1, RI_ALL_ONLINE },
+	{ 0x2b8080, 1, RI_ALL_ONLINE }, { 0x300104, 1, RI_ALL_ONLINE },
 	{ 0x300114, 1, RI_ALL_ONLINE }, { 0x300124, 1, RI_ALL_ONLINE },
 	{ 0x300134, 1, RI_ALL_ONLINE }, { 0x30026c, 1, RI_ALL_ONLINE },
-	{ 0x3002a0, 1, RI_ALL_ONLINE }, { 0x321000, 1, RI_ALL_ONLINE },
-	{ 0x328960, 1, RI_E1H_ONLINE }, { 0x338000, 1, RI_ALL_ONLINE },
+	{ 0x3002a0, 1, RI_ALL_ONLINE }, { 0x338000, 1, RI_ALL_ONLINE },
 	{ 0x338040, 1, RI_ALL_ONLINE }, { 0x338080, 1, RI_ALL_ONLINE },
 	{ 0x3380c0, 1, RI_ALL_ONLINE }
 };
@@ -515,7 +635,6 @@ static const struct wreg_addr wreg_addrs_e1[WREGS_COUNT_E1] = {
 	{ 0x1b0c00, 192, 1, read_reg_e1_0, RI_E1_OFFLINE }
 };
 
-
 #define WREGS_COUNT_E1H			1
 static const u32 read_reg_e1h_0[] = { 0x1b1040, 0x1b1000 };
 
@@ -530,22 +649,53 @@ static const struct wreg_addr wreg_addrs_e2[WREGS_COUNT_E2] = {
 	{ 0x1b0c00, 128, 2, read_reg_e2_0, RI_E2_OFFLINE }
 };
 
-static const struct dump_sign dump_sign_all = { 0x49aa93ee, 0x40835, 0x22 };
-
+static const struct dump_sign dump_sign_all = { 0x4d18b0a4, 0x60010, 0x3a };
 
 #define TIMER_REGS_COUNT_E1		2
-static const u32 timer_status_regs_e1[TIMER_REGS_COUNT_E1] =
-	{ 0x164014, 0x164018 };
-static const u32 timer_scan_regs_e1[TIMER_REGS_COUNT_E1] =
-	{ 0x1640d0, 0x1640d4 };
 
+static const u32 timer_status_regs_e1[TIMER_REGS_COUNT_E1] = {
+	0x164014, 0x164018 };
+static const u32 timer_scan_regs_e1[TIMER_REGS_COUNT_E1] = {
+	0x1640d0, 0x1640d4 };
 
 #define TIMER_REGS_COUNT_E1H		2
-static const u32 timer_status_regs_e1h[TIMER_REGS_COUNT_E1H] =
-	{ 0x164014, 0x164018 };
-static const u32 timer_scan_regs_e1h[TIMER_REGS_COUNT_E1H] =
-	{ 0x1640d0, 0x1640d4 };
 
+static const u32 timer_status_regs_e1h[TIMER_REGS_COUNT_E1H] = {
+	0x164014, 0x164018 };
+static const u32 timer_scan_regs_e1h[TIMER_REGS_COUNT_E1H] = {
+	0x1640d0, 0x1640d4 };
+
+#define TIMER_REGS_COUNT_E2		2
+
+static const u32 timer_status_regs_e2[TIMER_REGS_COUNT_E2] = {
+	0x164014, 0x164018 };
+static const u32 timer_scan_regs_e2[TIMER_REGS_COUNT_E2] = {
+	0x1640d0, 0x1640d4 };
+
+#define PAGE_MODE_VALUES_E1 0
+
+#define PAGE_READ_REGS_E1 0
+
+#define PAGE_WRITE_REGS_E1 0
+
+static const u32 page_vals_e1[] = { 0 };
+
+static const u32 page_write_regs_e1[] = { 0 };
+
+static const struct reg_addr page_read_regs_e1[] = { { 0x0, 0, RI_E1_ONLINE } };
+
+#define PAGE_MODE_VALUES_E1H 0
+
+#define PAGE_READ_REGS_E1H 0
+
+#define PAGE_WRITE_REGS_E1H 0
+
+static const u32 page_vals_e1h[] = { 0 };
+
+static const u32 page_write_regs_e1h[] = { 0 };
+
+static const struct reg_addr page_read_regs_e1h[] = {
+	{ 0x0, 0, RI_E1H_ONLINE } };
 
 #define PAGE_MODE_VALUES_E2 2
 
diff --git a/drivers/net/bnx2x/bnx2x_ethtool.c b/drivers/net/bnx2x/bnx2x_ethtool.c
index 99c672d894ca..5b44a8b48509 100644
--- a/drivers/net/bnx2x/bnx2x_ethtool.c
+++ b/drivers/net/bnx2x/bnx2x_ethtool.c
@@ -24,6 +24,7 @@
 #include "bnx2x.h"
 #include "bnx2x_cmn.h"
 #include "bnx2x_dump.h"
+#include "bnx2x_init.h"
 
 /* Note: in the format strings below %s is replaced by the queue-name which is
  * either its index or 'fcoe' for the fcoe queue. Make sure the format string
@@ -472,7 +473,7 @@ static int bnx2x_get_regs_len(struct net_device *dev)
 {
 	struct bnx2x *bp = netdev_priv(dev);
 	int regdump_len = 0;
-	int i;
+	int i, j, k;
 
 	if (CHIP_IS_E1(bp)) {
 		for (i = 0; i < REGS_COUNT; i++)
@@ -502,6 +503,15 @@ static int bnx2x_get_regs_len(struct net_device *dev)
 			if (IS_E2_ONLINE(wreg_addrs_e2[i].info))
 				regdump_len += wreg_addrs_e2[i].size *
 					(1 + wreg_addrs_e2[i].read_regs_count);
+
+		for (i = 0; i < PAGE_MODE_VALUES_E2; i++)
+			for (j = 0; j < PAGE_WRITE_REGS_E2; j++) {
+				for (k = 0; k < PAGE_READ_REGS_E2; k++)
+					if (IS_E2_ONLINE(page_read_regs_e2[k].
+							 info))
+						regdump_len +=
+						page_read_regs_e2[k].size;
+			}
 	}
 	regdump_len *= 4;
 	regdump_len += sizeof(struct dump_hdr);
@@ -539,6 +549,12 @@ static void bnx2x_get_regs(struct net_device *dev,
 	if (!netif_running(bp->dev))
 		return;
 
+	/* Disable parity attentions as long as following dump may
+	 * cause false alarms by reading never written registers. We
+	 * will re-enable parity attentions right after the dump.
+	 */
+	bnx2x_disable_blocks_parity(bp);
+
 	dump_hdr.hdr_size = (sizeof(struct dump_hdr) / 4) - 1;
 	dump_hdr.dump_sign = dump_sign_all;
 	dump_hdr.xstorm_waitp = REG_RD(bp, XSTORM_WAITP_ADDR);
@@ -580,6 +596,10 @@ static void bnx2x_get_regs(struct net_device *dev,
 
 		bnx2x_read_pages_regs_e2(bp, p);
 	}
+	/* Re-enable parity attentions */
+	bnx2x_clear_blocks_parity(bp);
+	if (CHIP_PARITY_ENABLED(bp))
+		bnx2x_enable_blocks_parity(bp);
 }
 
 #define PHY_FW_VER_LEN			20
diff --git a/drivers/net/bnx2x/bnx2x_init.h b/drivers/net/bnx2x/bnx2x_init.h
index a9d54874a559..5a268e9a0895 100644
--- a/drivers/net/bnx2x/bnx2x_init.h
+++ b/drivers/net/bnx2x/bnx2x_init.h
@@ -192,5 +192,225 @@ struct src_ent {
 	u64 next;
 };
 
+/****************************************************************************
+* Parity configuration
+****************************************************************************/
+#define BLOCK_PRTY_INFO(block, en_mask, m1, m1h, m2) \
+{ \
+	block##_REG_##block##_PRTY_MASK, \
+	block##_REG_##block##_PRTY_STS_CLR, \
+	en_mask, {m1, m1h, m2}, #block \
+}
+
+#define BLOCK_PRTY_INFO_0(block, en_mask, m1, m1h, m2) \
+{ \
+	block##_REG_##block##_PRTY_MASK_0, \
+	block##_REG_##block##_PRTY_STS_CLR_0, \
+	en_mask, {m1, m1h, m2}, #block"_0" \
+}
+
+#define BLOCK_PRTY_INFO_1(block, en_mask, m1, m1h, m2) \
+{ \
+	block##_REG_##block##_PRTY_MASK_1, \
+	block##_REG_##block##_PRTY_STS_CLR_1, \
+	en_mask, {m1, m1h, m2}, #block"_1" \
+}
+
+static const struct {
+	u32 mask_addr;
+	u32 sts_clr_addr;
+	u32 en_mask;		/* Mask to enable parity attentions */
+	struct {
+		u32 e1;		/* 57710 */
+		u32 e1h;	/* 57711 */
+		u32 e2;		/* 57712 */
+	} reg_mask;		/* Register mask (all valid bits) */
+	char name[7];		/* Block's longest name is 6 characters long
+				 * (name + suffix)
+				 */
+} bnx2x_blocks_parity_data[] = {
+	/* bit 19 masked */
+	/* REG_WR(bp, PXP_REG_PXP_PRTY_MASK, 0x80000); */
+	/* bit 5,18,20-31 */
+	/* REG_WR(bp, PXP2_REG_PXP2_PRTY_MASK_0, 0xfff40020); */
+	/* bit 5 */
+	/* REG_WR(bp, PXP2_REG_PXP2_PRTY_MASK_1, 0x20);	*/
+	/* REG_WR(bp, HC_REG_HC_PRTY_MASK, 0x0); */
+	/* REG_WR(bp, MISC_REG_MISC_PRTY_MASK, 0x0); */
+
+	/* Block IGU, MISC, PXP and PXP2 parity errors as long as we don't
+	 * want to handle "system kill" flow at the moment.
+	 */
+	BLOCK_PRTY_INFO(PXP, 0x3ffffff, 0x3ffffff, 0x3ffffff, 0x3ffffff),
+	BLOCK_PRTY_INFO_0(PXP2,	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff),
+	BLOCK_PRTY_INFO_1(PXP2,	0x7ff, 0x7f, 0x7f, 0x7ff),
+	BLOCK_PRTY_INFO(HC, 0x7, 0x7, 0x7, 0),
+	BLOCK_PRTY_INFO(IGU, 0x7ff, 0, 0, 0x7ff),
+	BLOCK_PRTY_INFO(MISC, 0x1, 0x1, 0x1, 0x1),
+	BLOCK_PRTY_INFO(QM, 0, 0x1ff, 0xfff, 0xfff),
+	BLOCK_PRTY_INFO(DORQ, 0, 0x3, 0x3, 0x3),
+	{GRCBASE_UPB + PB_REG_PB_PRTY_MASK,
+		GRCBASE_UPB + PB_REG_PB_PRTY_STS_CLR, 0,
+		{0xf, 0xf, 0xf}, "UPB"},
+	{GRCBASE_XPB + PB_REG_PB_PRTY_MASK,
+		GRCBASE_XPB + PB_REG_PB_PRTY_STS_CLR, 0,
+		{0xf, 0xf, 0xf}, "XPB"},
+	BLOCK_PRTY_INFO(SRC, 0x4, 0x7, 0x7, 0x7),
+	BLOCK_PRTY_INFO(CDU, 0, 0x1f, 0x1f, 0x1f),
+	BLOCK_PRTY_INFO(CFC, 0, 0xf, 0xf, 0xf),
+	BLOCK_PRTY_INFO(DBG, 0, 0x1, 0x1, 0x1),
+	BLOCK_PRTY_INFO(DMAE, 0, 0xf, 0xf, 0xf),
+	BLOCK_PRTY_INFO(BRB1, 0, 0xf, 0xf, 0xf),
+	BLOCK_PRTY_INFO(PRS, (1<<6), 0xff, 0xff, 0xff),
+	BLOCK_PRTY_INFO(TSDM, 0x18, 0x7ff, 0x7ff, 0x7ff),
+	BLOCK_PRTY_INFO(CSDM, 0x8, 0x7ff, 0x7ff, 0x7ff),
+	BLOCK_PRTY_INFO(USDM, 0x38, 0x7ff, 0x7ff, 0x7ff),
+	BLOCK_PRTY_INFO(XSDM, 0x8, 0x7ff, 0x7ff, 0x7ff),
+	BLOCK_PRTY_INFO_0(TSEM, 0, 0xffffffff, 0xffffffff, 0xffffffff),
+	BLOCK_PRTY_INFO_1(TSEM, 0, 0x3, 0x1f, 0x3f),
+	BLOCK_PRTY_INFO_0(USEM, 0, 0xffffffff, 0xffffffff, 0xffffffff),
+	BLOCK_PRTY_INFO_1(USEM, 0, 0x3, 0x1f, 0x1f),
+	BLOCK_PRTY_INFO_0(CSEM, 0, 0xffffffff, 0xffffffff, 0xffffffff),
+	BLOCK_PRTY_INFO_1(CSEM, 0, 0x3, 0x1f, 0x1f),
+	BLOCK_PRTY_INFO_0(XSEM, 0, 0xffffffff, 0xffffffff, 0xffffffff),
+	BLOCK_PRTY_INFO_1(XSEM, 0, 0x3, 0x1f, 0x3f),
+};
+
+
+/* [28] MCP Latched rom_parity
+ * [29] MCP Latched ump_rx_parity
+ * [30] MCP Latched ump_tx_parity
+ * [31] MCP Latched scpad_parity
+ */
+#define MISC_AEU_ENABLE_MCP_PRTY_BITS	\
+	(AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY | \
+	 AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY | \
+	 AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY | \
+	 AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY)
+
+/* Below registers control the MCP parity attention output. When
+ * MISC_AEU_ENABLE_MCP_PRTY_BITS are set - attentions are
+ * enabled, when cleared - disabled.
+ */
+static const u32 mcp_attn_ctl_regs[] = {
+	MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0,
+	MISC_REG_AEU_ENABLE4_NIG_0,
+	MISC_REG_AEU_ENABLE4_PXP_0,
+	MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0,
+	MISC_REG_AEU_ENABLE4_NIG_1,
+	MISC_REG_AEU_ENABLE4_PXP_1
+};
+
+static inline void bnx2x_set_mcp_parity(struct bnx2x *bp, u8 enable)
+{
+	int i;
+	u32 reg_val;
+
+	for (i = 0; i < ARRAY_SIZE(mcp_attn_ctl_regs); i++) {
+		reg_val = REG_RD(bp, mcp_attn_ctl_regs[i]);
+
+		if (enable)
+			reg_val |= MISC_AEU_ENABLE_MCP_PRTY_BITS;
+		else
+			reg_val &= ~MISC_AEU_ENABLE_MCP_PRTY_BITS;
+
+		REG_WR(bp, mcp_attn_ctl_regs[i], reg_val);
+	}
+}
+
+static inline u32 bnx2x_parity_reg_mask(struct bnx2x *bp, int idx)
+{
+	if (CHIP_IS_E1(bp))
+		return bnx2x_blocks_parity_data[idx].reg_mask.e1;
+	else if (CHIP_IS_E1H(bp))
+		return bnx2x_blocks_parity_data[idx].reg_mask.e1h;
+	else
+		return bnx2x_blocks_parity_data[idx].reg_mask.e2;
+}
+
+static inline void bnx2x_disable_blocks_parity(struct bnx2x *bp)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(bnx2x_blocks_parity_data); i++) {
+		u32 dis_mask = bnx2x_parity_reg_mask(bp, i);
+
+		if (dis_mask) {
+			REG_WR(bp, bnx2x_blocks_parity_data[i].mask_addr,
+			       dis_mask);
+			DP(NETIF_MSG_HW, "Setting parity mask "
+						 "for %s to\t\t0x%x\n",
+				    bnx2x_blocks_parity_data[i].name, dis_mask);
+		}
+	}
+
+	/* Disable MCP parity attentions */
+	bnx2x_set_mcp_parity(bp, false);
+}
+
+/**
+ * Clear the parity error status registers.
+ */
+static inline void bnx2x_clear_blocks_parity(struct bnx2x *bp)
+{
+	int i;
+	u32 reg_val, mcp_aeu_bits =
+		AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY |
+		AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY |
+		AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY |
+		AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY;
+
+	/* Clear SEM_FAST parities */
+	REG_WR(bp, XSEM_REG_FAST_MEMORY + SEM_FAST_REG_PARITY_RST, 0x1);
+	REG_WR(bp, TSEM_REG_FAST_MEMORY + SEM_FAST_REG_PARITY_RST, 0x1);
+	REG_WR(bp, USEM_REG_FAST_MEMORY + SEM_FAST_REG_PARITY_RST, 0x1);
+	REG_WR(bp, CSEM_REG_FAST_MEMORY + SEM_FAST_REG_PARITY_RST, 0x1);
+
+	for (i = 0; i < ARRAY_SIZE(bnx2x_blocks_parity_data); i++) {
+		u32 reg_mask = bnx2x_parity_reg_mask(bp, i);
+
+		if (reg_mask) {
+			reg_val = REG_RD(bp, bnx2x_blocks_parity_data[i].
+					 sts_clr_addr);
+			if (reg_val & reg_mask)
+				DP(NETIF_MSG_HW,
+					    "Parity errors in %s: 0x%x\n",
+					    bnx2x_blocks_parity_data[i].name,
+					    reg_val & reg_mask);
+		}
+	}
+
+	/* Check if there were parity attentions in MCP */
+	reg_val = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_4_MCP);
+	if (reg_val & mcp_aeu_bits)
+		DP(NETIF_MSG_HW, "Parity error in MCP: 0x%x\n",
+		   reg_val & mcp_aeu_bits);
+
+	/* Clear parity attentions in MCP:
+	 * [7]  clears Latched rom_parity
+	 * [8]  clears Latched ump_rx_parity
+	 * [9]  clears Latched ump_tx_parity
+	 * [10] clears Latched scpad_parity (both ports)
+	 */
+	REG_WR(bp, MISC_REG_AEU_CLR_LATCH_SIGNAL, 0x780);
+}
+
+static inline void bnx2x_enable_blocks_parity(struct bnx2x *bp)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(bnx2x_blocks_parity_data); i++) {
+		u32 reg_mask = bnx2x_parity_reg_mask(bp, i);
+
+		if (reg_mask)
+			REG_WR(bp, bnx2x_blocks_parity_data[i].mask_addr,
+				bnx2x_blocks_parity_data[i].en_mask & reg_mask);
+	}
+
+	/* Enable MCP parity attentions */
+	bnx2x_set_mcp_parity(bp, true);
+}
+
+
 #endif /* BNX2X_INIT_H */
 
diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c
index 3866468aeb04..b5558bc7223d 100644
--- a/drivers/net/bnx2x/bnx2x_main.c
+++ b/drivers/net/bnx2x/bnx2x_main.c
@@ -3152,7 +3152,6 @@ static inline void bnx2x_attn_int_deasserted3(struct bnx2x *bp, u32 attn)
 #define LOAD_COUNTER_MASK	(((u32)0x1 << LOAD_COUNTER_BITS) - 1)
 #define RESET_DONE_FLAG_MASK	(~LOAD_COUNTER_MASK)
 #define RESET_DONE_FLAG_SHIFT	LOAD_COUNTER_BITS
-#define CHIP_PARITY_SUPPORTED(bp)   (CHIP_IS_E1(bp) || CHIP_IS_E1H(bp))
 
 /*
  * should be run under rtnl lock
@@ -3527,7 +3526,7 @@ static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted)
 	   try to handle this event */
 	bnx2x_acquire_alr(bp);
 
-	if (bnx2x_chk_parity_attn(bp)) {
+	if (CHIP_PARITY_ENABLED(bp) && bnx2x_chk_parity_attn(bp)) {
 		bp->recovery_state = BNX2X_RECOVERY_INIT;
 		bnx2x_set_reset_in_progress(bp);
 		schedule_delayed_work(&bp->reset_task, 0);
@@ -4754,7 +4753,7 @@ static int bnx2x_int_mem_test(struct bnx2x *bp)
 	return 0; /* OK */
 }
 
-static void enable_blocks_attention(struct bnx2x *bp)
+static void bnx2x_enable_blocks_attention(struct bnx2x *bp)
 {
 	REG_WR(bp, PXP_REG_PXP_INT_MASK_0, 0);
 	if (CHIP_IS_E2(bp))
@@ -4808,53 +4807,9 @@ static void enable_blocks_attention(struct bnx2x *bp)
 	REG_WR(bp, CDU_REG_CDU_INT_MASK, 0);
 	REG_WR(bp, DMAE_REG_DMAE_INT_MASK, 0);
 /*	REG_WR(bp, MISC_REG_MISC_INT_MASK, 0); */
-	REG_WR(bp, PBF_REG_PBF_INT_MASK, 0X18);		/* bit 3,4 masked */
+	REG_WR(bp, PBF_REG_PBF_INT_MASK, 0x18);		/* bit 3,4 masked */
 }
 
-static const struct {
-	u32 addr;
-	u32 mask;
-} bnx2x_parity_mask[] = {
-	{PXP_REG_PXP_PRTY_MASK,		0x3ffffff},
-	{PXP2_REG_PXP2_PRTY_MASK_0,	0xffffffff},
-	{PXP2_REG_PXP2_PRTY_MASK_1,	0x7f},
-	{HC_REG_HC_PRTY_MASK,		0x7},
-	{MISC_REG_MISC_PRTY_MASK,	0x1},
-	{QM_REG_QM_PRTY_MASK,		0x0},
-	{DORQ_REG_DORQ_PRTY_MASK,	0x0},
-	{GRCBASE_UPB + PB_REG_PB_PRTY_MASK, 0x0},
-	{GRCBASE_XPB + PB_REG_PB_PRTY_MASK, 0x0},
-	{SRC_REG_SRC_PRTY_MASK,		0x4}, /* bit 2 */
-	{CDU_REG_CDU_PRTY_MASK,		0x0},
-	{CFC_REG_CFC_PRTY_MASK,		0x0},
-	{DBG_REG_DBG_PRTY_MASK,		0x0},
-	{DMAE_REG_DMAE_PRTY_MASK,	0x0},
-	{BRB1_REG_BRB1_PRTY_MASK,	0x0},
-	{PRS_REG_PRS_PRTY_MASK,		(1<<6)},/* bit 6 */
-	{TSDM_REG_TSDM_PRTY_MASK,	0x18},	/* bit 3,4 */
-	{CSDM_REG_CSDM_PRTY_MASK,	0x8},	/* bit 3 */
-	{USDM_REG_USDM_PRTY_MASK,	0x38},  /* bit 3,4,5 */
-	{XSDM_REG_XSDM_PRTY_MASK,	0x8},	/* bit 3 */
-	{TSEM_REG_TSEM_PRTY_MASK_0,	0x0},
-	{TSEM_REG_TSEM_PRTY_MASK_1,	0x0},
-	{USEM_REG_USEM_PRTY_MASK_0,	0x0},
-	{USEM_REG_USEM_PRTY_MASK_1,	0x0},
-	{CSEM_REG_CSEM_PRTY_MASK_0,	0x0},
-	{CSEM_REG_CSEM_PRTY_MASK_1,	0x0},
-	{XSEM_REG_XSEM_PRTY_MASK_0,	0x0},
-	{XSEM_REG_XSEM_PRTY_MASK_1,	0x0}
-};
-
-static void enable_blocks_parity(struct bnx2x *bp)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(bnx2x_parity_mask); i++)
-		REG_WR(bp, bnx2x_parity_mask[i].addr,
-			bnx2x_parity_mask[i].mask);
-}
-
-
 static void bnx2x_reset_common(struct bnx2x *bp)
 {
 	/* reset_common */
@@ -5350,9 +5305,9 @@ static int bnx2x_init_hw_common(struct bnx2x *bp, u32 load_code)
 	/* clear PXP2 attentions */
 	REG_RD(bp, PXP2_REG_PXP2_INT_STS_CLR_0);
 
-	enable_blocks_attention(bp);
-	if (CHIP_PARITY_SUPPORTED(bp))
-		enable_blocks_parity(bp);
+	bnx2x_enable_blocks_attention(bp);
+	if (CHIP_PARITY_ENABLED(bp))
+		bnx2x_enable_blocks_parity(bp);
 
 	if (!BP_NOMCP(bp)) {
 		/* In E2 2-PORT mode, same ext phy is used for the two paths */
diff --git a/drivers/net/bnx2x/bnx2x_reg.h b/drivers/net/bnx2x/bnx2x_reg.h
index bfd875b72906..38ef7ca9f21d 100644
--- a/drivers/net/bnx2x/bnx2x_reg.h
+++ b/drivers/net/bnx2x/bnx2x_reg.h
@@ -18,6 +18,8 @@
  * WR - Write Clear (write 1 to clear the bit)
  *
  */
+#ifndef BNX2X_REG_H
+#define BNX2X_REG_H
 
 #define ATC_ATC_INT_STS_REG_ADDRESS_ERROR			 (0x1<<0)
 #define ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS		 (0x1<<2)
@@ -39,6 +41,8 @@
 #define BRB1_REG_BRB1_PRTY_MASK 				 0x60138
 /* [R 4] Parity register #0 read */
 #define BRB1_REG_BRB1_PRTY_STS					 0x6012c
+/* [RC 4] Parity register #0 read clear */
+#define BRB1_REG_BRB1_PRTY_STS_CLR				 0x60130
 /* [RW 10] At address BRB1_IND_FREE_LIST_PRS_CRDT initialize free head. At
  * address BRB1_IND_FREE_LIST_PRS_CRDT+1 initialize free tail. At address
  * BRB1_IND_FREE_LIST_PRS_CRDT+2 initialize parser initial credit. Warning -
@@ -132,8 +136,12 @@
 #define CCM_REG_CCM_INT_MASK					 0xd01e4
 /* [R 11] Interrupt register #0 read */
 #define CCM_REG_CCM_INT_STS					 0xd01d8
+/* [RW 27] Parity mask register #0 read/write */
+#define CCM_REG_CCM_PRTY_MASK					 0xd01f4
 /* [R 27] Parity register #0 read */
 #define CCM_REG_CCM_PRTY_STS					 0xd01e8
+/* [RC 27] Parity register #0 read clear */
+#define CCM_REG_CCM_PRTY_STS_CLR				 0xd01ec
 /* [RW 3] The size of AG context region 0 in REG-pairs. Designates the MS
    REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
    Is used to determine the number of the AG context REG-pairs written back;
@@ -350,6 +358,8 @@
 #define CDU_REG_CDU_PRTY_MASK					 0x10104c
 /* [R 5] Parity register #0 read */
 #define CDU_REG_CDU_PRTY_STS					 0x101040
+/* [RC 5] Parity register #0 read clear */
+#define CDU_REG_CDU_PRTY_STS_CLR				 0x101044
 /* [RC 32] logging of error data in case of a CDU load error:
    {expected_cid[15:0]; xpected_type[2:0]; xpected_region[2:0]; ctive_error;
    ype_error; ctual_active; ctual_compressed_context}; */
@@ -381,6 +391,8 @@
 #define CFC_REG_CFC_PRTY_MASK					 0x104118
 /* [R 4] Parity register #0 read */
 #define CFC_REG_CFC_PRTY_STS					 0x10410c
+/* [RC 4] Parity register #0 read clear */
+#define CFC_REG_CFC_PRTY_STS_CLR				 0x104110
 /* [RW 21] CID cam access (21:1 - Data; alid - 0) */
 #define CFC_REG_CID_CAM 					 0x104800
 #define CFC_REG_CONTROL0					 0x104028
@@ -466,6 +478,8 @@
 #define CSDM_REG_CSDM_PRTY_MASK 				 0xc22bc
 /* [R 11] Parity register #0 read */
 #define CSDM_REG_CSDM_PRTY_STS					 0xc22b0
+/* [RC 11] Parity register #0 read clear */
+#define CSDM_REG_CSDM_PRTY_STS_CLR				 0xc22b4
 #define CSDM_REG_ENABLE_IN1					 0xc2238
 #define CSDM_REG_ENABLE_IN2					 0xc223c
 #define CSDM_REG_ENABLE_OUT1					 0xc2240
@@ -556,6 +570,9 @@
 /* [R 32] Parity register #0 read */
 #define CSEM_REG_CSEM_PRTY_STS_0				 0x200124
 #define CSEM_REG_CSEM_PRTY_STS_1				 0x200134
+/* [RC 32] Parity register #0 read clear */
+#define CSEM_REG_CSEM_PRTY_STS_CLR_0				 0x200128
+#define CSEM_REG_CSEM_PRTY_STS_CLR_1				 0x200138
 #define CSEM_REG_ENABLE_IN					 0x2000a4
 #define CSEM_REG_ENABLE_OUT					 0x2000a8
 /* [RW 32] This address space contains all registers and memories that are
@@ -648,6 +665,8 @@
 #define DBG_REG_DBG_PRTY_MASK					 0xc0a8
 /* [R 1] Parity register #0 read */
 #define DBG_REG_DBG_PRTY_STS					 0xc09c
+/* [RC 1] Parity register #0 read clear */
+#define DBG_REG_DBG_PRTY_STS_CLR				 0xc0a0
 /* [RW 1] When set the DMAE will process the commands as in E1.5. 1.The
  * function that is used is always SRC-PCI; 2.VF_Valid = 0; 3.VFID=0;
  * 4.Completion function=0; 5.Error handling=0 */
@@ -668,6 +687,8 @@
 #define DMAE_REG_DMAE_PRTY_MASK 				 0x102064
 /* [R 4] Parity register #0 read */
 #define DMAE_REG_DMAE_PRTY_STS					 0x102058
+/* [RC 4] Parity register #0 read clear */
+#define DMAE_REG_DMAE_PRTY_STS_CLR				 0x10205c
 /* [RW 1] Command 0 go. */
 #define DMAE_REG_GO_C0						 0x102080
 /* [RW 1] Command 1 go. */
@@ -734,6 +755,8 @@
 #define DORQ_REG_DORQ_PRTY_MASK 				 0x170190
 /* [R 2] Parity register #0 read */
 #define DORQ_REG_DORQ_PRTY_STS					 0x170184
+/* [RC 2] Parity register #0 read clear */
+#define DORQ_REG_DORQ_PRTY_STS_CLR				 0x170188
 /* [RW 8] The address to write the DPM CID to STORM. */
 #define DORQ_REG_DPM_CID_ADDR					 0x170044
 /* [RW 5] The DPM mode CID extraction offset. */
@@ -842,8 +865,12 @@
 /* [R 1] data availble for error memory. If this bit is clear do not red
  * from error_handling_memory. */
 #define IGU_REG_ERROR_HANDLING_DATA_VALID			 0x130130
+/* [RW 11] Parity mask register #0 read/write */
+#define IGU_REG_IGU_PRTY_MASK					 0x1300a8
 /* [R 11] Parity register #0 read */
 #define IGU_REG_IGU_PRTY_STS					 0x13009c
+/* [RC 11] Parity register #0 read clear */
+#define IGU_REG_IGU_PRTY_STS_CLR				 0x1300a0
 /* [R 4] Debug: int_handle_fsm */
 #define IGU_REG_INT_HANDLE_FSM					 0x130050
 #define IGU_REG_LEADING_EDGE_LATCH				 0x130134
@@ -1501,6 +1528,8 @@
 #define MISC_REG_MISC_PRTY_MASK 				 0xa398
 /* [R 1] Parity register #0 read */
 #define MISC_REG_MISC_PRTY_STS					 0xa38c
+/* [RC 1] Parity register #0 read clear */
+#define MISC_REG_MISC_PRTY_STS_CLR				 0xa390
 #define MISC_REG_NIG_WOL_P0					 0xa270
 #define MISC_REG_NIG_WOL_P1					 0xa274
 /* [R 1] If set indicate that the pcie_rst_b was asserted without perst
@@ -2082,6 +2111,10 @@
 #define PBF_REG_PBF_INT_MASK					 0x1401d4
 /* [R 5] Interrupt register #0 read */
 #define PBF_REG_PBF_INT_STS					 0x1401c8
+/* [RW 20] Parity mask register #0 read/write */
+#define PBF_REG_PBF_PRTY_MASK					 0x1401e4
+/* [RC 20] Parity register #0 read clear */
+#define PBF_REG_PBF_PRTY_STS_CLR				 0x1401dc
 #define PB_REG_CONTROL						 0
 /* [RW 2] Interrupt mask register #0 read/write */
 #define PB_REG_PB_INT_MASK					 0x28
@@ -2091,6 +2124,8 @@
 #define PB_REG_PB_PRTY_MASK					 0x38
 /* [R 4] Parity register #0 read */
 #define PB_REG_PB_PRTY_STS					 0x2c
+/* [RC 4] Parity register #0 read clear */
+#define PB_REG_PB_PRTY_STS_CLR					 0x30
 #define PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR		 (0x1<<0)
 #define PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW	 (0x1<<8)
 #define PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR	 (0x1<<1)
@@ -2446,6 +2481,8 @@
 #define PRS_REG_PRS_PRTY_MASK					 0x401a4
 /* [R 8] Parity register #0 read */
 #define PRS_REG_PRS_PRTY_STS					 0x40198
+/* [RC 8] Parity register #0 read clear */
+#define PRS_REG_PRS_PRTY_STS_CLR				 0x4019c
 /* [RW 8] Context region for pure acknowledge packets. Used in CFC load
    request message */
 #define PRS_REG_PURE_REGIONS					 0x40024
@@ -2599,6 +2636,9 @@
 /* [R 32] Parity register #0 read */
 #define PXP2_REG_PXP2_PRTY_STS_0				 0x12057c
 #define PXP2_REG_PXP2_PRTY_STS_1				 0x12058c
+/* [RC 32] Parity register #0 read clear */
+#define PXP2_REG_PXP2_PRTY_STS_CLR_0				 0x120580
+#define PXP2_REG_PXP2_PRTY_STS_CLR_1				 0x120590
 /* [R 1] Debug only: The 'almost full' indication from each fifo (gives
    indication about backpressure) */
 #define PXP2_REG_RD_ALMOST_FULL_0				 0x120424
@@ -3001,6 +3041,8 @@
 #define PXP_REG_PXP_PRTY_MASK					 0x103094
 /* [R 26] Parity register #0 read */
 #define PXP_REG_PXP_PRTY_STS					 0x103088
+/* [RC 27] Parity register #0 read clear */
+#define PXP_REG_PXP_PRTY_STS_CLR				 0x10308c
 /* [RW 4] The activity counter initial increment value sent in the load
    request */
 #define QM_REG_ACTCTRINITVAL_0					 0x168040
@@ -3157,6 +3199,8 @@
 #define QM_REG_QM_PRTY_MASK					 0x168454
 /* [R 12] Parity register #0 read */
 #define QM_REG_QM_PRTY_STS					 0x168448
+/* [RC 12] Parity register #0 read clear */
+#define QM_REG_QM_PRTY_STS_CLR					 0x16844c
 /* [R 32] Current queues in pipeline: Queues from 32 to 63 */
 #define QM_REG_QSTATUS_HIGH					 0x16802c
 /* [R 32] Current queues in pipeline: Queues from 96 to 127 */
@@ -3442,6 +3486,8 @@
 #define QM_REG_WRRWEIGHTS_9					 0x168848
 /* [R 6] Keep the fill level of the fifo from write client 1 */
 #define QM_REG_XQM_WRC_FIFOLVL					 0x168000
+/* [W 1] reset to parity interrupt */
+#define SEM_FAST_REG_PARITY_RST					 0x18840
 #define SRC_REG_COUNTFREE0					 0x40500
 /* [RW 1] If clr the searcher is compatible to E1 A0 - support only two
    ports. If set the searcher support 8 functions. */
@@ -3470,6 +3516,8 @@
 #define SRC_REG_SRC_PRTY_MASK					 0x404c8
 /* [R 3] Parity register #0 read */
 #define SRC_REG_SRC_PRTY_STS					 0x404bc
+/* [RC 3] Parity register #0 read clear */
+#define SRC_REG_SRC_PRTY_STS_CLR				 0x404c0
 /* [R 4] Used to read the value of the XX protection CAM occupancy counter. */
 #define TCM_REG_CAM_OCCUP					 0x5017c
 /* [RW 1] CDU AG read Interface enable. If 0 - the request input is
@@ -3596,8 +3644,12 @@
 #define TCM_REG_TCM_INT_MASK					 0x501dc
 /* [R 11] Interrupt register #0 read */
 #define TCM_REG_TCM_INT_STS					 0x501d0
+/* [RW 27] Parity mask register #0 read/write */
+#define TCM_REG_TCM_PRTY_MASK					 0x501ec
 /* [R 27] Parity register #0 read */
 #define TCM_REG_TCM_PRTY_STS					 0x501e0
+/* [RC 27] Parity register #0 read clear */
+#define TCM_REG_TCM_PRTY_STS_CLR				 0x501e4
 /* [RW 3] The size of AG context region 0 in REG-pairs. Designates the MS
    REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
    Is used to determine the number of the AG context REG-pairs written back;
@@ -3755,6 +3807,10 @@
 #define TM_REG_TM_INT_MASK					 0x1640fc
 /* [R 1] Interrupt register #0 read */
 #define TM_REG_TM_INT_STS					 0x1640f0
+/* [RW 7] Parity mask register #0 read/write */
+#define TM_REG_TM_PRTY_MASK					 0x16410c
+/* [RC 7] Parity register #0 read clear */
+#define TM_REG_TM_PRTY_STS_CLR					 0x164104
 /* [RW 8] The event id for aggregated interrupt 0 */
 #define TSDM_REG_AGG_INT_EVENT_0				 0x42038
 #define TSDM_REG_AGG_INT_EVENT_1				 0x4203c
@@ -3835,6 +3891,8 @@
 #define TSDM_REG_TSDM_PRTY_MASK 				 0x422bc
 /* [R 11] Parity register #0 read */
 #define TSDM_REG_TSDM_PRTY_STS					 0x422b0
+/* [RC 11] Parity register #0 read clear */
+#define TSDM_REG_TSDM_PRTY_STS_CLR				 0x422b4
 /* [RW 5] The number of time_slots in the arbitration cycle */
 #define TSEM_REG_ARB_CYCLE_SIZE 				 0x180034
 /* [RW 3] The source that is associated with arbitration element 0. Source
@@ -3914,6 +3972,9 @@
 #define TSEM_REG_SLOW_EXT_STORE_EMPTY				 0x1802a0
 /* [RW 8] List of free threads . There is a bit per thread. */
 #define TSEM_REG_THREADS_LIST					 0x1802e4
+/* [RC 32] Parity register #0 read clear */
+#define TSEM_REG_TSEM_PRTY_STS_CLR_0				 0x180118
+#define TSEM_REG_TSEM_PRTY_STS_CLR_1				 0x180128
 /* [RW 3] The arbitration scheme of time_slot 0 */
 #define TSEM_REG_TS_0_AS					 0x180038
 /* [RW 3] The arbitration scheme of time_slot 10 */
@@ -4116,6 +4177,8 @@
 #define UCM_REG_UCM_INT_STS					 0xe01c8
 /* [R 27] Parity register #0 read */
 #define UCM_REG_UCM_PRTY_STS					 0xe01d8
+/* [RC 27] Parity register #0 read clear */
+#define UCM_REG_UCM_PRTY_STS_CLR				 0xe01dc
 /* [RW 2] The size of AG context region 0 in REG-pairs. Designates the MS
    REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
    Is used to determine the number of the AG context REG-pairs written back;
@@ -4292,6 +4355,8 @@
 #define USDM_REG_USDM_PRTY_MASK 				 0xc42c0
 /* [R 11] Parity register #0 read */
 #define USDM_REG_USDM_PRTY_STS					 0xc42b4
+/* [RC 11] Parity register #0 read clear */
+#define USDM_REG_USDM_PRTY_STS_CLR				 0xc42b8
 /* [RW 5] The number of time_slots in the arbitration cycle */
 #define USEM_REG_ARB_CYCLE_SIZE 				 0x300034
 /* [RW 3] The source that is associated with arbitration element 0. Source
@@ -4421,6 +4486,9 @@
 /* [R 32] Parity register #0 read */
 #define USEM_REG_USEM_PRTY_STS_0				 0x300124
 #define USEM_REG_USEM_PRTY_STS_1				 0x300134
+/* [RC 32] Parity register #0 read clear */
+#define USEM_REG_USEM_PRTY_STS_CLR_0				 0x300128
+#define USEM_REG_USEM_PRTY_STS_CLR_1				 0x300138
 /* [W 7] VF or PF ID for reset error bit. Values 0-63 reset error bit for 64
  * VF; values 64-67 reset error for 4 PF; values 68-127 are not valid. */
 #define USEM_REG_VFPF_ERR_NUM					 0x300380
@@ -4797,6 +4865,8 @@
 #define XSDM_REG_XSDM_PRTY_MASK 				 0x1662bc
 /* [R 11] Parity register #0 read */
 #define XSDM_REG_XSDM_PRTY_STS					 0x1662b0
+/* [RC 11] Parity register #0 read clear */
+#define XSDM_REG_XSDM_PRTY_STS_CLR				 0x1662b4
 /* [RW 5] The number of time_slots in the arbitration cycle */
 #define XSEM_REG_ARB_CYCLE_SIZE 				 0x280034
 /* [RW 3] The source that is associated with arbitration element 0. Source
@@ -4929,6 +4999,9 @@
 /* [R 32] Parity register #0 read */
 #define XSEM_REG_XSEM_PRTY_STS_0				 0x280124
 #define XSEM_REG_XSEM_PRTY_STS_1				 0x280134
+/* [RC 32] Parity register #0 read clear */
+#define XSEM_REG_XSEM_PRTY_STS_CLR_0				 0x280128
+#define XSEM_REG_XSEM_PRTY_STS_CLR_1				 0x280138
 #define MCPR_NVM_ACCESS_ENABLE_EN				 (1L<<0)
 #define MCPR_NVM_ACCESS_ENABLE_WR_EN				 (1L<<1)
 #define MCPR_NVM_ADDR_NVM_ADDR_VALUE				 (0xffffffL<<0)
@@ -6316,3 +6389,4 @@ static inline u8 calc_crc8(u32 data, u8 crc)
 }
 
 
+#endif /* BNX2X_REG_H */
-- 
cgit v1.2.3


From 084d6cbb13e351f48ecd87cc8718ace6b72845e8 Mon Sep 17 00:00:00 2001
From: Vladislav Zolotarov <vladz@broadcom.com>
Date: Sun, 9 Jan 2011 02:20:19 +0000
Subject: bnx2x: Move to D0 before clearing MSI/MSI-X configuration.

Move to D0 before clearing MSI/MSI-X configuration. Otherwise MSI/MSI-X
won't be cleared.

Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x/bnx2x_main.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'drivers')

diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c
index b5558bc7223d..84e1af4d65e1 100644
--- a/drivers/net/bnx2x/bnx2x_main.c
+++ b/drivers/net/bnx2x/bnx2x_main.c
@@ -9508,9 +9508,15 @@ static void __devexit bnx2x_remove_one(struct pci_dev *pdev)
 	/* Delete all NAPI objects */
 	bnx2x_del_all_napi(bp);
 
+	/* Power on: we can't let PCI layer write to us while we are in D3 */
+	bnx2x_set_power_state(bp, PCI_D0);
+
 	/* Disable MSI/MSI-X */
 	bnx2x_disable_msi(bp);
 
+	/* Power off */
+	bnx2x_set_power_state(bp, PCI_D3hot);
+
 	/* Make sure RESET task is not scheduled before continuing */
 	cancel_delayed_work_sync(&bp->reset_task);
 
-- 
cgit v1.2.3


From 9bcb8018cf7af1f00f35cad4b121897cac077269 Mon Sep 17 00:00:00 2001
From: Vladislav Zolotarov <vladz@broadcom.com>
Date: Sun, 9 Jan 2011 02:20:34 +0000
Subject: bnx2x: Fix the race on bp->stats_pending.

Fix the race on bp->stats_pending between the timer and a LINK_UP event
handler.

Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x/bnx2x_stats.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'drivers')

diff --git a/drivers/net/bnx2x/bnx2x_stats.c b/drivers/net/bnx2x/bnx2x_stats.c
index 6e4d9b144cc4..bda60d590fa8 100644
--- a/drivers/net/bnx2x/bnx2x_stats.c
+++ b/drivers/net/bnx2x/bnx2x_stats.c
@@ -158,6 +158,11 @@ static void bnx2x_storm_stats_post(struct bnx2x *bp)
 
 		spin_lock_bh(&bp->stats_lock);
 
+		if (bp->stats_pending) {
+			spin_unlock_bh(&bp->stats_lock);
+			return;
+		}
+
 		ramrod_data.drv_counter = bp->stats_counter++;
 		ramrod_data.collect_port = bp->port.pmf ? 1 : 0;
 		for_each_eth_queue(bp, i)
-- 
cgit v1.2.3


From 2aca31e765f756408ebc8408378afa5795d1ae49 Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@linux-foundation.org>
Date: Thu, 6 Jan 2011 18:40:36 +0000
Subject: sky2: fix limited auto negotiation

The sky2 driver would always try all possible supported speeds even
if the user only asked for a limited set of speed/duplex combinations.

Reported-by: Mohsen Hariri <m.hariri@gmail.com>
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sky2.c | 26 +++++++++++++++++---------
 1 file changed, 17 insertions(+), 9 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 39996bf3b247..b56109294758 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -3411,18 +3411,15 @@ static u32 sky2_supported_modes(const struct sky2_hw *hw)
 		u32 modes = SUPPORTED_10baseT_Half
 			| SUPPORTED_10baseT_Full
 			| SUPPORTED_100baseT_Half
-			| SUPPORTED_100baseT_Full
-			| SUPPORTED_Autoneg | SUPPORTED_TP;
+			| SUPPORTED_100baseT_Full;
 
 		if (hw->flags & SKY2_HW_GIGABIT)
 			modes |= SUPPORTED_1000baseT_Half
 				| SUPPORTED_1000baseT_Full;
 		return modes;
 	} else
-		return  SUPPORTED_1000baseT_Half
-			| SUPPORTED_1000baseT_Full
-			| SUPPORTED_Autoneg
-			| SUPPORTED_FIBRE;
+		return SUPPORTED_1000baseT_Half
+			| SUPPORTED_1000baseT_Full;
 }
 
 static int sky2_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
@@ -3436,9 +3433,11 @@ static int sky2_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 	if (sky2_is_copper(hw)) {
 		ecmd->port = PORT_TP;
 		ecmd->speed = sky2->speed;
+		ecmd->supported |=  SUPPORTED_Autoneg | SUPPORTED_TP;
 	} else {
 		ecmd->speed = SPEED_1000;
 		ecmd->port = PORT_FIBRE;
+		ecmd->supported |=  SUPPORTED_Autoneg | SUPPORTED_FIBRE;
 	}
 
 	ecmd->advertising = sky2->advertising;
@@ -3455,8 +3454,19 @@ static int sky2_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 	u32 supported = sky2_supported_modes(hw);
 
 	if (ecmd->autoneg == AUTONEG_ENABLE) {
+		if (ecmd->advertising & ~supported)
+			return -EINVAL;
+
+		if (sky2_is_copper(hw))
+			sky2->advertising = ecmd->advertising |
+					    ADVERTISED_TP |
+					    ADVERTISED_Autoneg;
+		else
+			sky2->advertising = ecmd->advertising |
+					    ADVERTISED_FIBRE |
+					    ADVERTISED_Autoneg;
+
 		sky2->flags |= SKY2_FLAG_AUTO_SPEED;
-		ecmd->advertising = supported;
 		sky2->duplex = -1;
 		sky2->speed = -1;
 	} else {
@@ -3500,8 +3510,6 @@ static int sky2_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 		sky2->flags &= ~SKY2_FLAG_AUTO_SPEED;
 	}
 
-	sky2->advertising = ecmd->advertising;
-
 	if (netif_running(dev)) {
 		sky2_phy_reinit(sky2);
 		sky2_set_multicast(dev);
-- 
cgit v1.2.3


From 86aa77854f47ab6f5f9c687507af1f57d2b89004 Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Sun, 9 Jan 2011 15:54:15 -0800
Subject: sky2: convert to new VLAN model (v0.2)

This converts sky2 to new VLAN offload flags control via ethtool.
It also allows for transmit offload of vlan tagged frames which
was not possible before.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Reviewed-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sky2.c | 117 +++++++++++++++++++++++------------------------------
 drivers/net/sky2.h |   6 +--
 2 files changed, 52 insertions(+), 71 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index b56109294758..7d85a38377a1 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -46,10 +46,6 @@
 
 #include <asm/irq.h>
 
-#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
-#define SKY2_VLAN_TAG_USED 1
-#endif
-
 #include "sky2.h"
 
 #define DRV_NAME		"sky2"
@@ -1326,39 +1322,34 @@ static int sky2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 	return err;
 }
 
-#ifdef SKY2_VLAN_TAG_USED
-static void sky2_set_vlan_mode(struct sky2_hw *hw, u16 port, bool onoff)
-{
-	if (onoff) {
-		sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
-			     RX_VLAN_STRIP_ON);
-		sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
-			     TX_VLAN_TAG_ON);
-	} else {
-		sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
-			     RX_VLAN_STRIP_OFF);
-		sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
-			     TX_VLAN_TAG_OFF);
-	}
-}
+#define NETIF_F_ALL_VLAN (NETIF_F_HW_VLAN_TX|NETIF_F_HW_VLAN_RX)
 
-static void sky2_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
+static void sky2_vlan_mode(struct net_device *dev)
 {
 	struct sky2_port *sky2 = netdev_priv(dev);
 	struct sky2_hw *hw = sky2->hw;
 	u16 port = sky2->port;
 
-	netif_tx_lock_bh(dev);
-	napi_disable(&hw->napi);
+	if (dev->features & NETIF_F_HW_VLAN_RX)
+		sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
+			     RX_VLAN_STRIP_ON);
+	else
+		sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
+			     RX_VLAN_STRIP_OFF);
 
-	sky2->vlgrp = grp;
-	sky2_set_vlan_mode(hw, port, grp != NULL);
+	dev->vlan_features = dev->features &~ NETIF_F_ALL_VLAN;
+	if (dev->features & NETIF_F_HW_VLAN_TX)
+		sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
+			     TX_VLAN_TAG_ON);
+	else {
+		sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
+			     TX_VLAN_TAG_OFF);
 
-	sky2_read32(hw, B0_Y2_SP_LISR);
-	napi_enable(&hw->napi);
-	netif_tx_unlock_bh(dev);
+		/* Can't do transmit offload of vlan without hw vlan */
+		dev->vlan_features &= ~(NETIF_F_TSO | NETIF_F_SG
+					| NETIF_F_ALL_CSUM);
+	}
 }
-#endif
 
 /* Amount of required worst case padding in rx buffer */
 static inline unsigned sky2_rx_pad(const struct sky2_hw *hw)
@@ -1635,9 +1626,7 @@ static void sky2_hw_up(struct sky2_port *sky2)
 	sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map,
 			   sky2->tx_ring_size - 1);
 
-#ifdef SKY2_VLAN_TAG_USED
-	sky2_set_vlan_mode(hw, port, sky2->vlgrp != NULL);
-#endif
+	sky2_vlan_mode(sky2->netdev);
 
 	sky2_rx_start(sky2);
 }
@@ -1780,7 +1769,7 @@ static netdev_tx_t sky2_xmit_frame(struct sk_buff *skb,
 	}
 
 	ctrl = 0;
-#ifdef SKY2_VLAN_TAG_USED
+
 	/* Add VLAN tag, can piggyback on LRGLEN or ADDR64 */
 	if (vlan_tx_tag_present(skb)) {
 		if (!le) {
@@ -1792,7 +1781,6 @@ static netdev_tx_t sky2_xmit_frame(struct sk_buff *skb,
 		le->length = cpu_to_be16(vlan_tx_tag_get(skb));
 		ctrl |= INS_VLAN;
 	}
-#endif
 
 	/* Handle TCP checksum offload */
 	if (skb->ip_summed == CHECKSUM_PARTIAL) {
@@ -2432,11 +2420,8 @@ static struct sk_buff *sky2_receive(struct net_device *dev,
 	struct sk_buff *skb = NULL;
 	u16 count = (status & GMR_FS_LEN) >> 16;
 
-#ifdef SKY2_VLAN_TAG_USED
-	/* Account for vlan tag */
-	if (sky2->vlgrp && (status & GMR_FS_VLAN))
-		count -= VLAN_HLEN;
-#endif
+	if (status & GMR_FS_VLAN)
+		count -= VLAN_HLEN;	/* Account for vlan tag */
 
 	netif_printk(sky2, rx_status, KERN_DEBUG, dev,
 		     "rx slot %u status 0x%x len %d\n",
@@ -2504,17 +2489,9 @@ static inline void sky2_tx_done(struct net_device *dev, u16 last)
 static inline void sky2_skb_rx(const struct sky2_port *sky2,
 			       u32 status, struct sk_buff *skb)
 {
-#ifdef SKY2_VLAN_TAG_USED
-	u16 vlan_tag = be16_to_cpu(sky2->rx_tag);
-	if (sky2->vlgrp && (status & GMR_FS_VLAN)) {
-		if (skb->ip_summed == CHECKSUM_NONE)
-			vlan_hwaccel_receive_skb(skb, sky2->vlgrp, vlan_tag);
-		else
-			vlan_gro_receive(&sky2->hw->napi, sky2->vlgrp,
-					 vlan_tag, skb);
-		return;
-	}
-#endif
+	if (status & GMR_FS_VLAN)
+		__vlan_hwaccel_put_tag(skb, be16_to_cpu(sky2->rx_tag));
+
 	if (skb->ip_summed == CHECKSUM_NONE)
 		netif_receive_skb(skb);
 	else
@@ -2631,7 +2608,6 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx)
 				goto exit_loop;
 			break;
 
-#ifdef SKY2_VLAN_TAG_USED
 		case OP_RXVLAN:
 			sky2->rx_tag = length;
 			break;
@@ -2639,7 +2615,6 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx)
 		case OP_RXCHKSVLAN:
 			sky2->rx_tag = length;
 			/* fall through */
-#endif
 		case OP_RXCHKS:
 			if (likely(sky2->flags & SKY2_FLAG_RX_CHECKSUM))
 				sky2_rx_checksum(sky2, status);
@@ -3042,6 +3017,10 @@ static int __devinit sky2_init(struct sky2_hw *hw)
 			| SKY2_HW_NEW_LE
 			| SKY2_HW_AUTO_TX_SUM
 			| SKY2_HW_ADV_POWER_CTL;
+
+		/* The workaround for status conflicts VLAN tag detection. */
+		if (hw->chip_rev == CHIP_REV_YU_FE2_A0)
+			hw->flags |= SKY2_HW_VLAN_BROKEN;
 		break;
 
 	case CHIP_ID_YUKON_SUPR:
@@ -4237,15 +4216,28 @@ static int sky2_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom
 static int sky2_set_flags(struct net_device *dev, u32 data)
 {
 	struct sky2_port *sky2 = netdev_priv(dev);
-	u32 supported =
-		(sky2->hw->flags & SKY2_HW_RSS_BROKEN) ? 0 : ETH_FLAG_RXHASH;
+	unsigned long old_feat = dev->features;
+	u32 supported = 0;
 	int rc;
 
+	if (!(sky2->hw->flags & SKY2_HW_RSS_BROKEN))
+		supported |= ETH_FLAG_RXHASH;
+
+	if (!(sky2->hw->flags & SKY2_HW_VLAN_BROKEN))
+		supported |= ETH_FLAG_RXVLAN | ETH_FLAG_TXVLAN;
+
+	printk(KERN_DEBUG "sky2 set_flags: supported %x data %x\n",
+	       supported, data);
+
 	rc = ethtool_op_set_flags(dev, data, supported);
 	if (rc)
 		return rc;
 
-	rx_set_rss(dev);
+	if ((old_feat ^ dev->features) & NETIF_F_RXHASH)
+		rx_set_rss(dev);
+
+	if ((old_feat ^ dev->features) & NETIF_F_ALL_VLAN)
+		sky2_vlan_mode(dev);
 
 	return 0;
 }
@@ -4281,6 +4273,7 @@ static const struct ethtool_ops sky2_ethtool_ops = {
 	.get_sset_count = sky2_get_sset_count,
 	.get_ethtool_stats = sky2_get_ethtool_stats,
 	.set_flags	= sky2_set_flags,
+	.get_flags	= ethtool_op_get_flags,
 };
 
 #ifdef CONFIG_SKY2_DEBUG
@@ -4562,9 +4555,6 @@ static const struct net_device_ops sky2_netdev_ops[2] = {
 	.ndo_change_mtu		= sky2_change_mtu,
 	.ndo_tx_timeout		= sky2_tx_timeout,
 	.ndo_get_stats64	= sky2_get_stats,
-#ifdef SKY2_VLAN_TAG_USED
-	.ndo_vlan_rx_register	= sky2_vlan_rx_register,
-#endif
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= sky2_netpoll,
 #endif
@@ -4580,9 +4570,6 @@ static const struct net_device_ops sky2_netdev_ops[2] = {
 	.ndo_change_mtu		= sky2_change_mtu,
 	.ndo_tx_timeout		= sky2_tx_timeout,
 	.ndo_get_stats64	= sky2_get_stats,
-#ifdef SKY2_VLAN_TAG_USED
-	.ndo_vlan_rx_register	= sky2_vlan_rx_register,
-#endif
   },
 };
 
@@ -4633,7 +4620,8 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
 	sky2->port = port;
 
 	dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG
-		| NETIF_F_TSO  | NETIF_F_GRO;
+		| NETIF_F_TSO | NETIF_F_GRO;
+
 	if (highmem)
 		dev->features |= NETIF_F_HIGHDMA;
 
@@ -4641,13 +4629,8 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
 	if (!(hw->flags & SKY2_HW_RSS_BROKEN))
 		dev->features |= NETIF_F_RXHASH;
 
-#ifdef SKY2_VLAN_TAG_USED
-	/* The workaround for FE+ status conflicts with VLAN tag detection. */
-	if (!(sky2->hw->chip_id == CHIP_ID_YUKON_FE_P &&
-	      sky2->hw->chip_rev == CHIP_REV_YU_FE2_A0)) {
+	if (!(hw->flags & SKY2_HW_VLAN_BROKEN))
 		dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
-	}
-#endif
 
 	/* read the mac address */
 	memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN);
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 80bdc404f1ea..6861b0e8db9a 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -2236,11 +2236,8 @@ struct sky2_port {
 	u16		     rx_pending;
 	u16		     rx_data_size;
 	u16		     rx_nfrags;
-
-#ifdef SKY2_VLAN_TAG_USED
 	u16		     rx_tag;
-	struct vlan_group    *vlgrp;
-#endif
+
 	struct {
 		unsigned long last;
 		u32	mac_rp;
@@ -2284,6 +2281,7 @@ struct sky2_hw {
 #define SKY2_HW_AUTO_TX_SUM	0x00000040	/* new IP decode for Tx */
 #define SKY2_HW_ADV_POWER_CTL	0x00000080	/* additional PHY power regs */
 #define SKY2_HW_RSS_BROKEN	0x00000100
+#define SKY2_HW_VLAN_BROKEN     0x00000200
 
 	u8	     	     chip_id;
 	u8		     chip_rev;
-- 
cgit v1.2.3


From dba5a68ae147d0672d4b9259f3ece37777f8b2fa Mon Sep 17 00:00:00 2001
From: "Rafael J. Wysocki" <rjw@sisk.pl>
Date: Fri, 7 Jan 2011 11:12:05 +0000
Subject: forcedeth: Do not use legacy PCI power management

The forcedeth driver uses the legacy PCI power management, so it has
to do PCI-specific things in its ->suspend() and ->resume() callbacks
and some of them are not done correctly.

Convert forcedeth to the new PCI power management framework and make
it let the PCI subsystem take care of all the PCI-specific aspects of
device handling during system power transitions.

Tested with nVidia Corporation MCP55 Ethernet (rev a2).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/forcedeth.c | 34 ++++++++++++----------------------
 1 file changed, 12 insertions(+), 22 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index cd2d72d825df..af09296ef0dd 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -3949,6 +3949,7 @@ static int nv_set_wol(struct net_device *dev, struct ethtool_wolinfo *wolinfo)
 		writel(flags, base + NvRegWakeUpFlags);
 		spin_unlock_irq(&np->lock);
 	}
+	device_set_wakeup_enable(&np->pci_dev->dev, np->wolenabled);
 	return 0;
 }
 
@@ -5488,14 +5489,10 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 	/* set mac address */
 	nv_copy_mac_to_hw(dev);
 
-	/* Workaround current PCI init glitch:  wakeup bits aren't
-	 * being set from PCI PM capability.
-	 */
-	device_init_wakeup(&pci_dev->dev, 1);
-
 	/* disable WOL */
 	writel(0, base + NvRegWakeUpFlags);
 	np->wolenabled = 0;
+	device_set_wakeup_enable(&pci_dev->dev, false);
 
 	if (id->driver_data & DEV_HAS_POWER_CNTRL) {
 
@@ -5746,8 +5743,9 @@ static void __devexit nv_remove(struct pci_dev *pci_dev)
 }
 
 #ifdef CONFIG_PM
-static int nv_suspend(struct pci_dev *pdev, pm_message_t state)
+static int nv_suspend(struct device *device)
 {
+	struct pci_dev *pdev = to_pci_dev(device);
 	struct net_device *dev = pci_get_drvdata(pdev);
 	struct fe_priv *np = netdev_priv(dev);
 	u8 __iomem *base = get_hwbase(dev);
@@ -5763,25 +5761,17 @@ static int nv_suspend(struct pci_dev *pdev, pm_message_t state)
 	for (i = 0; i <= np->register_size/sizeof(u32); i++)
 		np->saved_config_space[i] = readl(base + i*sizeof(u32));
 
-	pci_save_state(pdev);
-	pci_enable_wake(pdev, pci_choose_state(pdev, state), np->wolenabled);
-	pci_disable_device(pdev);
-	pci_set_power_state(pdev, pci_choose_state(pdev, state));
 	return 0;
 }
 
-static int nv_resume(struct pci_dev *pdev)
+static int nv_resume(struct device *device)
 {
+	struct pci_dev *pdev = to_pci_dev(device);
 	struct net_device *dev = pci_get_drvdata(pdev);
 	struct fe_priv *np = netdev_priv(dev);
 	u8 __iomem *base = get_hwbase(dev);
 	int i, rc = 0;
 
-	pci_set_power_state(pdev, PCI_D0);
-	pci_restore_state(pdev);
-	/* ack any pending wake events, disable PME */
-	pci_enable_wake(pdev, PCI_D0, 0);
-
 	/* restore non-pci configuration space */
 	for (i = 0; i <= np->register_size/sizeof(u32); i++)
 		writel(np->saved_config_space[i], base+i*sizeof(u32));
@@ -5800,6 +5790,9 @@ static int nv_resume(struct pci_dev *pdev)
 	return rc;
 }
 
+static SIMPLE_DEV_PM_OPS(nv_pm_ops, nv_suspend, nv_resume);
+#define NV_PM_OPS (&nv_pm_ops)
+
 static void nv_shutdown(struct pci_dev *pdev)
 {
 	struct net_device *dev = pci_get_drvdata(pdev);
@@ -5822,15 +5815,13 @@ static void nv_shutdown(struct pci_dev *pdev)
 	 * only put the device into D3 if we really go for poweroff.
 	 */
 	if (system_state == SYSTEM_POWER_OFF) {
-		if (pci_enable_wake(pdev, PCI_D3cold, np->wolenabled))
-			pci_enable_wake(pdev, PCI_D3hot, np->wolenabled);
+		pci_wake_from_d3(pdev, np->wolenabled);
 		pci_set_power_state(pdev, PCI_D3hot);
 	}
 }
 #else
-#define nv_suspend NULL
+#define NV_PM_OPS NULL
 #define nv_shutdown NULL
-#define nv_resume NULL
 #endif /* CONFIG_PM */
 
 static DEFINE_PCI_DEVICE_TABLE(pci_tbl) = {
@@ -6002,9 +5993,8 @@ static struct pci_driver driver = {
 	.id_table	= pci_tbl,
 	.probe		= nv_probe,
 	.remove		= __devexit_p(nv_remove),
-	.suspend	= nv_suspend,
-	.resume		= nv_resume,
 	.shutdown	= nv_shutdown,
+	.driver.pm	= NV_PM_OPS,
 };
 
 static int __init init_nic(void)
-- 
cgit v1.2.3


From eee3a96c6368f47df8df5bd4ed1843600652b337 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?fran=C3=A7ois=20romieu?= <romieu@fr.zoreil.com>
Date: Sat, 8 Jan 2011 02:17:26 +0000
Subject: r8169: delay phy init until device opens.

It workarounds the 60s firmware load failure timeout for the
non-modular case.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/r8169.c | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 27a7c20f64cd..dd758cdb55c4 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -3069,15 +3069,6 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		rtl8168_driver_start(tp);
 	}
 
-	rtl8169_init_phy(dev, tp);
-
-	/*
-	 * Pretend we are using VLANs; This bypasses a nasty bug where
-	 * Interrupts stop flowing on high load on 8110SCd controllers.
-	 */
-	if (tp->mac_version == RTL_GIGA_MAC_VER_05)
-		RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) | RxVlan);
-
 	device_set_wakeup_enable(&pdev->dev, tp->features & RTL_FEATURE_WOL);
 
 	if (pci_dev_run_wake(pdev))
@@ -3127,6 +3118,7 @@ static void __devexit rtl8169_remove_one(struct pci_dev *pdev)
 static int rtl8169_open(struct net_device *dev)
 {
 	struct rtl8169_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
 	struct pci_dev *pdev = tp->pci_dev;
 	int retval = -ENOMEM;
 
@@ -3162,6 +3154,15 @@ static int rtl8169_open(struct net_device *dev)
 
 	napi_enable(&tp->napi);
 
+	rtl8169_init_phy(dev, tp);
+
+	/*
+	 * Pretend we are using VLANs; This bypasses a nasty bug where
+	 * Interrupts stop flowing on high load on 8110SCd controllers.
+	 */
+	if (tp->mac_version == RTL_GIGA_MAC_VER_05)
+		RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) | RxVlan);
+
 	rtl_pll_power_up(tp);
 
 	rtl_hw_start(dev);
@@ -3171,7 +3172,7 @@ static int rtl8169_open(struct net_device *dev)
 	tp->saved_wolopts = 0;
 	pm_runtime_put_noidle(&pdev->dev);
 
-	rtl8169_check_link_status(dev, tp, tp->mmio_addr);
+	rtl8169_check_link_status(dev, tp, ioaddr);
 out:
 	return retval;
 
-- 
cgit v1.2.3


From fc741216db156994c554ac31c1151fe0e00d8f0e Mon Sep 17 00:00:00 2001
From: Jesse Gross <jesse@nicira.com>
Date: Sun, 9 Jan 2011 06:23:32 +0000
Subject: net offloading: Pass features into netif_needs_gso().

Now that there is a single function that can compute the device
features relevant to a packet, we don't want to run it for each
offload.  This converts netif_needs_gso() to take the features
of the device, rather than computing them itself.

Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/xen-netfront.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index cdbeec9f83ea..546de5749824 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -488,7 +488,7 @@ static int xennet_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	if (unlikely(!netif_carrier_ok(dev) ||
 		     (frags > 1 && !xennet_can_sg(dev)) ||
-		     netif_needs_gso(dev, skb))) {
+		     netif_needs_gso(skb, netif_skb_features(skb)))) {
 		spin_unlock_irq(&np->tx_lock);
 		goto drop;
 	}
-- 
cgit v1.2.3


From dd93f95e92283498f2497a632a81c167444668b5 Mon Sep 17 00:00:00 2001
From: Bruce Allan <bruce.w.allan@intel.com>
Date: Thu, 6 Jan 2011 14:29:48 +0000
Subject: e1000e: cleanup variables set but not used

The ICR register is clear on read and we don't care what the returned value
is when resetting the hardware so the icr variable(s) can be removed.  We
should not ignore the return from e1000_lv_jumbo_workaround_ich8lan() and
from e1000_get_phy_id_82571() (dump a debug message when it fails and when
an unknown Phy id is returned).

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/e1000e/82571.c   | 21 ++++++++++++++-------
 drivers/net/e1000e/es2lan.c  |  4 ++--
 drivers/net/e1000e/ich8lan.c |  4 ++--
 drivers/net/e1000e/netdev.c  |  3 +++
 4 files changed, 21 insertions(+), 11 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index e57e4097ef1b..11a273e4ba23 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -121,29 +121,36 @@ static s32 e1000_init_phy_params_82571(struct e1000_hw *hw)
 
 	/* This can only be done after all function pointers are setup. */
 	ret_val = e1000_get_phy_id_82571(hw);
+	if (ret_val) {
+		e_dbg("Error getting PHY ID\n");
+		return ret_val;
+	}
 
 	/* Verify phy id */
 	switch (hw->mac.type) {
 	case e1000_82571:
 	case e1000_82572:
 		if (phy->id != IGP01E1000_I_PHY_ID)
-			return -E1000_ERR_PHY;
+			ret_val = -E1000_ERR_PHY;
 		break;
 	case e1000_82573:
 		if (phy->id != M88E1111_I_PHY_ID)
-			return -E1000_ERR_PHY;
+			ret_val = -E1000_ERR_PHY;
 		break;
 	case e1000_82574:
 	case e1000_82583:
 		if (phy->id != BME1000_E_PHY_ID_R2)
-			return -E1000_ERR_PHY;
+			ret_val = -E1000_ERR_PHY;
 		break;
 	default:
-		return -E1000_ERR_PHY;
+		ret_val = -E1000_ERR_PHY;
 		break;
 	}
 
-	return 0;
+	if (ret_val)
+		e_dbg("PHY ID unknown: type = 0x%08x\n", phy->id);
+
+	return ret_val;
 }
 
 /**
@@ -956,7 +963,7 @@ static s32 e1000_set_d0_lplu_state_82571(struct e1000_hw *hw, bool active)
  **/
 static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
 {
-	u32 ctrl, ctrl_ext, icr;
+	u32 ctrl, ctrl_ext;
 	s32 ret_val;
 
 	/*
@@ -1040,7 +1047,7 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
 
 	/* Clear any pending interrupt events. */
 	ew32(IMC, 0xffffffff);
-	icr = er32(ICR);
+	er32(ICR);
 
 	if (hw->mac.type == e1000_82571) {
 		/* Install any alternate MAC address into RAR0 */
diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c
index b18c644e13d1..e45a61c8930a 100644
--- a/drivers/net/e1000e/es2lan.c
+++ b/drivers/net/e1000e/es2lan.c
@@ -784,7 +784,7 @@ static s32 e1000_get_link_up_info_80003es2lan(struct e1000_hw *hw, u16 *speed,
  **/
 static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw)
 {
-	u32 ctrl, icr;
+	u32 ctrl;
 	s32 ret_val;
 
 	/*
@@ -818,7 +818,7 @@ static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw)
 
 	/* Clear any pending interrupt events. */
 	ew32(IMC, 0xffffffff);
-	icr = er32(ICR);
+	er32(ICR);
 
 	ret_val = e1000_check_alt_mac_addr_generic(hw);
 
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index d86cc0832720..754590d79f6d 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -2977,7 +2977,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
 {
 	struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
 	u16 reg;
-	u32 ctrl, icr, kab;
+	u32 ctrl, kab;
 	s32 ret_val;
 
 	/*
@@ -3067,7 +3067,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
 		ew32(CRC_OFFSET, 0x65656565);
 
 	ew32(IMC, 0xffffffff);
-	icr = er32(ICR);
+	er32(ICR);
 
 	kab = er32(KABGTXD);
 	kab |= E1000_KABGTXD_BGSQLBIAS;
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index fe50242aa9e6..5498689ac20c 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -2734,6 +2734,9 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
 			ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, true);
 		else
 			ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, false);
+
+		if (ret_val)
+			e_dbg("failed to enable jumbo frame workaround mode\n");
 	}
 
 	/* Program MC offset vector base */
-- 
cgit v1.2.3


From 482fed85e64958f678a138a4b5f8891190d2b169 Mon Sep 17 00:00:00 2001
From: Bruce Allan <bruce.w.allan@intel.com>
Date: Thu, 6 Jan 2011 14:29:49 +0000
Subject: e1000e: convert calls of ops.[read|write]_reg to e1e_[r|w]phy

Cleans up the code a bit by using the driver-specific e1e_rphy and
e1e_wphy macros instead of the full function pointer variants.  Fix
a couple whitespace issue with two already existing calls to e1e_wphy.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/e1000e/ich8lan.c | 54 ++++++++++++++++++++------------------------
 drivers/net/e1000e/lib.c     |  3 ++-
 drivers/net/e1000e/phy.c     | 40 ++++++++++++++------------------
 3 files changed, 44 insertions(+), 53 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 754590d79f6d..902e4935f3ee 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -3118,7 +3118,7 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw)
 	 * Reset the phy after disabling host wakeup to reset the Rx buffer.
 	 */
 	if (hw->phy.type == e1000_phy_82578) {
-		hw->phy.ops.read_reg(hw, BM_WUC, &i);
+		e1e_rphy(hw, BM_WUC, &i);
 		ret_val = e1000_phy_hw_reset_ich8lan(hw);
 		if (ret_val)
 			return ret_val;
@@ -3276,9 +3276,8 @@ static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw)
 	    (hw->phy.type == e1000_phy_82577)) {
 		ew32(FCRTV_PCH, hw->fc.refresh_time);
 
-		ret_val = hw->phy.ops.write_reg(hw,
-		                             PHY_REG(BM_PORT_CTRL_PAGE, 27),
-		                             hw->fc.pause_time);
+		ret_val = e1e_wphy(hw, PHY_REG(BM_PORT_CTRL_PAGE, 27),
+				   hw->fc.pause_time);
 		if (ret_val)
 			return ret_val;
 	}
@@ -3342,8 +3341,7 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw)
 			return ret_val;
 		break;
 	case e1000_phy_ife:
-		ret_val = hw->phy.ops.read_reg(hw, IFE_PHY_MDIX_CONTROL,
-		                               &reg_data);
+		ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &reg_data);
 		if (ret_val)
 			return ret_val;
 
@@ -3361,8 +3359,7 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw)
 			reg_data |= IFE_PMC_AUTO_MDIX;
 			break;
 		}
-		ret_val = hw->phy.ops.write_reg(hw, IFE_PHY_MDIX_CONTROL,
-		                                reg_data);
+		ret_val = e1e_wphy(hw, IFE_PHY_MDIX_CONTROL, reg_data);
 		if (ret_val)
 			return ret_val;
 		break;
@@ -3646,7 +3643,8 @@ static s32 e1000_led_off_ich8lan(struct e1000_hw *hw)
 {
 	if (hw->phy.type == e1000_phy_ife)
 		return e1e_wphy(hw, IFE_PHY_SPECIAL_CONTROL_LED,
-			       (IFE_PSCL_PROBE_MODE | IFE_PSCL_PROBE_LEDS_OFF));
+				(IFE_PSCL_PROBE_MODE |
+				 IFE_PSCL_PROBE_LEDS_OFF));
 
 	ew32(LEDCTL, hw->mac.ledctl_mode1);
 	return 0;
@@ -3660,8 +3658,7 @@ static s32 e1000_led_off_ich8lan(struct e1000_hw *hw)
  **/
 static s32 e1000_setup_led_pchlan(struct e1000_hw *hw)
 {
-	return hw->phy.ops.write_reg(hw, HV_LED_CONFIG,
-					(u16)hw->mac.ledctl_mode1);
+	return e1e_wphy(hw, HV_LED_CONFIG, (u16)hw->mac.ledctl_mode1);
 }
 
 /**
@@ -3672,8 +3669,7 @@ static s32 e1000_setup_led_pchlan(struct e1000_hw *hw)
  **/
 static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw)
 {
-	return hw->phy.ops.write_reg(hw, HV_LED_CONFIG,
-					(u16)hw->mac.ledctl_default);
+	return e1e_wphy(hw, HV_LED_CONFIG, (u16)hw->mac.ledctl_default);
 }
 
 /**
@@ -3704,7 +3700,7 @@ static s32 e1000_led_on_pchlan(struct e1000_hw *hw)
 		}
 	}
 
-	return hw->phy.ops.write_reg(hw, HV_LED_CONFIG, data);
+	return e1e_wphy(hw, HV_LED_CONFIG, data);
 }
 
 /**
@@ -3735,7 +3731,7 @@ static s32 e1000_led_off_pchlan(struct e1000_hw *hw)
 		}
 	}
 
-	return hw->phy.ops.write_reg(hw, HV_LED_CONFIG, data);
+	return e1e_wphy(hw, HV_LED_CONFIG, data);
 }
 
 /**
@@ -3844,20 +3840,20 @@ static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw)
 	if ((hw->phy.type == e1000_phy_82578) ||
 	    (hw->phy.type == e1000_phy_82579) ||
 	    (hw->phy.type == e1000_phy_82577)) {
-		hw->phy.ops.read_reg(hw, HV_SCC_UPPER, &phy_data);
-		hw->phy.ops.read_reg(hw, HV_SCC_LOWER, &phy_data);
-		hw->phy.ops.read_reg(hw, HV_ECOL_UPPER, &phy_data);
-		hw->phy.ops.read_reg(hw, HV_ECOL_LOWER, &phy_data);
-		hw->phy.ops.read_reg(hw, HV_MCC_UPPER, &phy_data);
-		hw->phy.ops.read_reg(hw, HV_MCC_LOWER, &phy_data);
-		hw->phy.ops.read_reg(hw, HV_LATECOL_UPPER, &phy_data);
-		hw->phy.ops.read_reg(hw, HV_LATECOL_LOWER, &phy_data);
-		hw->phy.ops.read_reg(hw, HV_COLC_UPPER, &phy_data);
-		hw->phy.ops.read_reg(hw, HV_COLC_LOWER, &phy_data);
-		hw->phy.ops.read_reg(hw, HV_DC_UPPER, &phy_data);
-		hw->phy.ops.read_reg(hw, HV_DC_LOWER, &phy_data);
-		hw->phy.ops.read_reg(hw, HV_TNCRS_UPPER, &phy_data);
-		hw->phy.ops.read_reg(hw, HV_TNCRS_LOWER, &phy_data);
+		e1e_rphy(hw, HV_SCC_UPPER, &phy_data);
+		e1e_rphy(hw, HV_SCC_LOWER, &phy_data);
+		e1e_rphy(hw, HV_ECOL_UPPER, &phy_data);
+		e1e_rphy(hw, HV_ECOL_LOWER, &phy_data);
+		e1e_rphy(hw, HV_MCC_UPPER, &phy_data);
+		e1e_rphy(hw, HV_MCC_LOWER, &phy_data);
+		e1e_rphy(hw, HV_LATECOL_UPPER, &phy_data);
+		e1e_rphy(hw, HV_LATECOL_LOWER, &phy_data);
+		e1e_rphy(hw, HV_COLC_UPPER, &phy_data);
+		e1e_rphy(hw, HV_COLC_LOWER, &phy_data);
+		e1e_rphy(hw, HV_DC_UPPER, &phy_data);
+		e1e_rphy(hw, HV_DC_LOWER, &phy_data);
+		e1e_rphy(hw, HV_TNCRS_UPPER, &phy_data);
+		e1e_rphy(hw, HV_TNCRS_LOWER, &phy_data);
 	}
 }
 
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index 7e55170a601e..ff2872153b21 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -1135,7 +1135,8 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
 		ret_val = e1e_rphy(hw, PHY_AUTONEG_ADV, &mii_nway_adv_reg);
 		if (ret_val)
 			return ret_val;
-		ret_val = e1e_rphy(hw, PHY_LP_ABILITY, &mii_nway_lp_ability_reg);
+		ret_val =
+		    e1e_rphy(hw, PHY_LP_ABILITY, &mii_nway_lp_ability_reg);
 		if (ret_val)
 			return ret_val;
 
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index 1781efeb55e3..a640f1c369ae 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -637,12 +637,11 @@ s32 e1000e_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data)
  **/
 s32 e1000_copper_link_setup_82577(struct e1000_hw *hw)
 {
-	struct e1000_phy_info *phy = &hw->phy;
 	s32 ret_val;
 	u16 phy_data;
 
 	/* Enable CRS on TX. This must be set for half-duplex operation. */
-	ret_val = phy->ops.read_reg(hw, I82577_CFG_REG, &phy_data);
+	ret_val = e1e_rphy(hw, I82577_CFG_REG, &phy_data);
 	if (ret_val)
 		goto out;
 
@@ -651,7 +650,7 @@ s32 e1000_copper_link_setup_82577(struct e1000_hw *hw)
 	/* Enable downshift */
 	phy_data |= I82577_CFG_ENABLE_DOWNSHIFT;
 
-	ret_val = phy->ops.write_reg(hw, I82577_CFG_REG, phy_data);
+	ret_val = e1e_wphy(hw, I82577_CFG_REG, phy_data);
 
 out:
 	return ret_val;
@@ -774,16 +773,14 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
 	}
 
 	if (phy->type == e1000_phy_82578) {
-		ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
-		                            &phy_data);
+		ret_val = e1e_rphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
 		if (ret_val)
 			return ret_val;
 
 		/* 82578 PHY - set the downshift count to 1x. */
 		phy_data |= I82578_EPSCR_DOWNSHIFT_ENABLE;
 		phy_data &= ~I82578_EPSCR_DOWNSHIFT_COUNTER_MASK;
-		ret_val = phy->ops.write_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
-		                             phy_data);
+		ret_val = e1e_wphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
 		if (ret_val)
 			return ret_val;
 	}
@@ -1319,9 +1316,8 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
 				 * We didn't get link.
 				 * Reset the DSP and cross our fingers.
 				 */
-				ret_val = e1e_wphy(hw,
-						M88E1000_PHY_PAGE_SELECT,
-						0x001d);
+				ret_val = e1e_wphy(hw, M88E1000_PHY_PAGE_SELECT,
+						   0x001d);
 				if (ret_val)
 					return ret_val;
 				ret_val = e1000e_phy_reset_dsp(hw);
@@ -3071,12 +3067,12 @@ s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw)
 		goto out;
 
 	/* Do not apply workaround if in PHY loopback bit 14 set */
-	hw->phy.ops.read_reg(hw, PHY_CONTROL, &data);
+	e1e_rphy(hw, PHY_CONTROL, &data);
 	if (data & PHY_CONTROL_LB)
 		goto out;
 
 	/* check if link is up and at 1Gbps */
-	ret_val = hw->phy.ops.read_reg(hw, BM_CS_STATUS, &data);
+	ret_val = e1e_rphy(hw, BM_CS_STATUS, &data);
 	if (ret_val)
 		goto out;
 
@@ -3092,14 +3088,12 @@ s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw)
 	mdelay(200);
 
 	/* flush the packets in the fifo buffer */
-	ret_val = hw->phy.ops.write_reg(hw, HV_MUX_DATA_CTRL,
-	                                HV_MUX_DATA_CTRL_GEN_TO_MAC |
-	                                HV_MUX_DATA_CTRL_FORCE_SPEED);
+	ret_val = e1e_wphy(hw, HV_MUX_DATA_CTRL, HV_MUX_DATA_CTRL_GEN_TO_MAC |
+			   HV_MUX_DATA_CTRL_FORCE_SPEED);
 	if (ret_val)
 		goto out;
 
-	ret_val = hw->phy.ops.write_reg(hw, HV_MUX_DATA_CTRL,
-	                                HV_MUX_DATA_CTRL_GEN_TO_MAC);
+	ret_val = e1e_wphy(hw, HV_MUX_DATA_CTRL, HV_MUX_DATA_CTRL_GEN_TO_MAC);
 
 out:
 	return ret_val;
@@ -3119,7 +3113,7 @@ s32 e1000_check_polarity_82577(struct e1000_hw *hw)
 	s32 ret_val;
 	u16 data;
 
-	ret_val = phy->ops.read_reg(hw, I82577_PHY_STATUS_2, &data);
+	ret_val = e1e_rphy(hw, I82577_PHY_STATUS_2, &data);
 
 	if (!ret_val)
 		phy->cable_polarity = (data & I82577_PHY_STATUS2_REV_POLARITY)
@@ -3142,13 +3136,13 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw)
 	u16 phy_data;
 	bool link;
 
-	ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data);
+	ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data);
 	if (ret_val)
 		goto out;
 
 	e1000e_phy_force_speed_duplex_setup(hw, &phy_data);
 
-	ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data);
+	ret_val = e1e_wphy(hw, PHY_CONTROL, phy_data);
 	if (ret_val)
 		goto out;
 
@@ -3212,7 +3206,7 @@ s32 e1000_get_phy_info_82577(struct e1000_hw *hw)
 	if (ret_val)
 		goto out;
 
-	ret_val = phy->ops.read_reg(hw, I82577_PHY_STATUS_2, &data);
+	ret_val = e1e_rphy(hw, I82577_PHY_STATUS_2, &data);
 	if (ret_val)
 		goto out;
 
@@ -3224,7 +3218,7 @@ s32 e1000_get_phy_info_82577(struct e1000_hw *hw)
 		if (ret_val)
 			goto out;
 
-		ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &data);
+		ret_val = e1e_rphy(hw, PHY_1000T_STATUS, &data);
 		if (ret_val)
 			goto out;
 
@@ -3258,7 +3252,7 @@ s32 e1000_get_cable_length_82577(struct e1000_hw *hw)
 	s32 ret_val;
 	u16 phy_data, length;
 
-	ret_val = phy->ops.read_reg(hw, I82577_PHY_DIAG_STATUS, &phy_data);
+	ret_val = e1e_rphy(hw, I82577_PHY_DIAG_STATUS, &phy_data);
 	if (ret_val)
 		goto out;
 
-- 
cgit v1.2.3


From e0dc4f125456e57347a6d016bd7209f064135b1d Mon Sep 17 00:00:00 2001
From: Bruce Allan <bruce.w.allan@intel.com>
Date: Thu, 6 Jan 2011 14:29:50 +0000
Subject: e1000e: properly bounds-check string functions

Use string functions with bounds checking rather than their non-bounds
checking counterparts, and do not hard code these boundaries.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/e1000e/ethtool.c | 14 +++++++++-----
 drivers/net/e1000e/netdev.c  |  4 ++--
 2 files changed, 11 insertions(+), 7 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index affcacf6f5a9..c942ccab8bca 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -624,20 +624,24 @@ static void e1000_get_drvinfo(struct net_device *netdev,
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	char firmware_version[32];
 
-	strncpy(drvinfo->driver,  e1000e_driver_name, 32);
-	strncpy(drvinfo->version, e1000e_driver_version, 32);
+	strncpy(drvinfo->driver,  e1000e_driver_name,
+		sizeof(drvinfo->driver) - 1);
+	strncpy(drvinfo->version, e1000e_driver_version,
+		sizeof(drvinfo->version) - 1);
 
 	/*
 	 * EEPROM image version # is reported as firmware version # for
 	 * PCI-E controllers
 	 */
-	sprintf(firmware_version, "%d.%d-%d",
+	snprintf(firmware_version, sizeof(firmware_version), "%d.%d-%d",
 		(adapter->eeprom_vers & 0xF000) >> 12,
 		(adapter->eeprom_vers & 0x0FF0) >> 4,
 		(adapter->eeprom_vers & 0x000F));
 
-	strncpy(drvinfo->fw_version, firmware_version, 32);
-	strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
+	strncpy(drvinfo->fw_version, firmware_version,
+		sizeof(drvinfo->fw_version) - 1);
+	strncpy(drvinfo->bus_info, pci_name(adapter->pdev),
+		sizeof(drvinfo->bus_info) - 1);
 	drvinfo->regdump_len = e1000_get_regs_len(netdev);
 	drvinfo->eedump_len = e1000_get_eeprom_len(netdev);
 }
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 5498689ac20c..98729a6fb096 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -5639,7 +5639,7 @@ static void e1000_print_device_info(struct e1000_adapter *adapter)
 	ret_val = e1000_read_pba_string_generic(hw, pba_str,
 						E1000_PBANUM_LENGTH);
 	if (ret_val)
-		strcpy(pba_str, "Unknown");
+		strncpy((char *)pba_str, "Unknown", sizeof(pba_str) - 1);
 	e_info("MAC: %d, PHY: %d, PBA No: %s\n",
 	       hw->mac.type, hw->phy.type, pba_str);
 }
@@ -5968,7 +5968,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	if (!(adapter->flags & FLAG_HAS_AMT))
 		e1000_get_hw_control(adapter);
 
-	strcpy(netdev->name, "eth%d");
+	strncpy(netdev->name, "eth%d", sizeof(netdev->name) - 1);
 	err = register_netdev(netdev);
 	if (err)
 		goto err_register;
-- 
cgit v1.2.3


From fe46f58fa61f025564a3c1e80b789885cb4b0f30 Mon Sep 17 00:00:00 2001
From: Bruce Allan <bruce.w.allan@intel.com>
Date: Thu, 6 Jan 2011 14:29:51 +0000
Subject: e1000e: use either_crc_le() rather than re-write it

For the 82579 jumbo frame workaround, there is no need to re-write the CRC
calculation functionality already found in the kernel's ether_crc_le().

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/e1000e/e1000.h   |  1 +
 drivers/net/e1000e/ich8lan.c | 19 +------------------
 2 files changed, 2 insertions(+), 18 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 2c913b8e9116..4b3802ae1082 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -38,6 +38,7 @@
 #include <linux/netdevice.h>
 #include <linux/pci.h>
 #include <linux/pci-aspm.h>
+#include <linux/crc32.h>
 
 #include "hw.h"
 
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 902e4935f3ee..5328a2927731 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -1395,22 +1395,6 @@ void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw)
 	}
 }
 
-static u32 e1000_calc_rx_da_crc(u8 mac[])
-{
-	u32 poly = 0xEDB88320;	/* Polynomial for 802.3 CRC calculation */
-	u32 i, j, mask, crc;
-
-	crc = 0xffffffff;
-	for (i = 0; i < 6; i++) {
-		crc = crc ^ mac[i];
-		for (j = 8; j > 0; j--) {
-			mask = (crc & 1) * (-1);
-			crc = (crc >> 1) ^ (poly & mask);
-		}
-	}
-	return ~crc;
-}
-
 /**
  *  e1000_lv_jumbo_workaround_ich8lan - required for jumbo frame operation
  *  with 82579 PHY
@@ -1453,8 +1437,7 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable)
 			mac_addr[4] = (addr_high & 0xFF);
 			mac_addr[5] = ((addr_high >> 8) & 0xFF);
 
-			ew32(PCH_RAICC(i),
-					e1000_calc_rx_da_crc(mac_addr));
+			ew32(PCH_RAICC(i), ~ether_crc_le(ETH_ALEN, mac_addr));
 		}
 
 		/* Write Rx addresses to the PHY */
-- 
cgit v1.2.3


From 31dbe5b4ac6fca72dec946e4d0fa7f0913f1d9b1 Mon Sep 17 00:00:00 2001
From: Bruce Allan <bruce.w.allan@intel.com>
Date: Thu, 6 Jan 2011 14:29:52 +0000
Subject: e1000e: power off PHY after reset when interface is down

Some Phys supported by the driver do not remain powered off across a reset
of the device when the interface is down, e.g. on 82571, but not on 82574.
This patch powers down (only when WoL is disabled) the PHY after a reset if
the interface is down and the ethtool diagnostics are not currently running.

The ethtool diagnostic function required a minor re-factor as a result, and
the e1000_[get|put]_hw_control() functions are renamed since they are no
longer static to netdev.c as they are needed by the ethtool diagnostics.
A couple minor whitespace issues were cleaned up, too.

Reported-by: Arthur Jones <ajones@riverbed.com>
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/e1000e/e1000.h   |  2 ++
 drivers/net/e1000e/ethtool.c | 40 +++++++++++++++++++++++---------------
 drivers/net/e1000e/netdev.c  | 46 +++++++++++++++++++++++++-------------------
 3 files changed, 53 insertions(+), 35 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 4b3802ae1082..5255be753746 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -497,6 +497,8 @@ extern void e1000e_free_tx_resources(struct e1000_adapter *adapter);
 extern void e1000e_update_stats(struct e1000_adapter *adapter);
 extern void e1000e_set_interrupt_capability(struct e1000_adapter *adapter);
 extern void e1000e_reset_interrupt_capability(struct e1000_adapter *adapter);
+extern void e1000e_get_hw_control(struct e1000_adapter *adapter);
+extern void e1000e_release_hw_control(struct e1000_adapter *adapter);
 extern void e1000e_disable_aspm(struct pci_dev *pdev, u16 state);
 
 extern unsigned int copybreak;
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index c942ccab8bca..f8ed03dab9b1 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -1708,6 +1708,19 @@ static void e1000_diag_test(struct net_device *netdev,
 	bool if_running = netif_running(netdev);
 
 	set_bit(__E1000_TESTING, &adapter->state);
+
+	if (!if_running) {
+		/* Get control of and reset hardware */
+		if (adapter->flags & FLAG_HAS_AMT)
+			e1000e_get_hw_control(adapter);
+
+		e1000e_power_up_phy(adapter);
+
+		adapter->hw.phy.autoneg_wait_to_complete = 1;
+		e1000e_reset(adapter);
+		adapter->hw.phy.autoneg_wait_to_complete = 0;
+	}
+
 	if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
 		/* Offline tests */
 
@@ -1721,8 +1734,6 @@ static void e1000_diag_test(struct net_device *netdev,
 		if (if_running)
 			/* indicate we're in test mode */
 			dev_close(netdev);
-		else
-			e1000e_reset(adapter);
 
 		if (e1000_reg_test(adapter, &data[0]))
 			eth_test->flags |= ETH_TEST_FL_FAILED;
@@ -1736,8 +1747,6 @@ static void e1000_diag_test(struct net_device *netdev,
 			eth_test->flags |= ETH_TEST_FL_FAILED;
 
 		e1000e_reset(adapter);
-		/* make sure the phy is powered up */
-		e1000e_power_up_phy(adapter);
 		if (e1000_loopback_test(adapter, &data[3]))
 			eth_test->flags |= ETH_TEST_FL_FAILED;
 
@@ -1759,28 +1768,29 @@ static void e1000_diag_test(struct net_device *netdev,
 		if (if_running)
 			dev_open(netdev);
 	} else {
-		if (!if_running && (adapter->flags & FLAG_HAS_AMT)) {
-			clear_bit(__E1000_TESTING, &adapter->state);
-			dev_open(netdev);
-			set_bit(__E1000_TESTING, &adapter->state);
-		}
+		/* Online tests */
 
 		e_info("online testing starting\n");
-		/* Online tests */
-		if (e1000_link_test(adapter, &data[4]))
-			eth_test->flags |= ETH_TEST_FL_FAILED;
 
-		/* Online tests aren't run; pass by default */
+		/* register, eeprom, intr and loopback tests not run online */
 		data[0] = 0;
 		data[1] = 0;
 		data[2] = 0;
 		data[3] = 0;
 
-		if (!if_running && (adapter->flags & FLAG_HAS_AMT))
-			dev_close(netdev);
+		if (e1000_link_test(adapter, &data[4]))
+			eth_test->flags |= ETH_TEST_FL_FAILED;
 
 		clear_bit(__E1000_TESTING, &adapter->state);
 	}
+
+	if (!if_running) {
+		e1000e_reset(adapter);
+
+		if (adapter->flags & FLAG_HAS_AMT)
+			e1000e_release_hw_control(adapter);
+	}
+
 	msleep_interruptible(4 * 1000);
 }
 
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 98729a6fb096..fa5b60452547 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -1980,15 +1980,15 @@ static void e1000_irq_enable(struct e1000_adapter *adapter)
 }
 
 /**
- * e1000_get_hw_control - get control of the h/w from f/w
+ * e1000e_get_hw_control - get control of the h/w from f/w
  * @adapter: address of board private structure
  *
- * e1000_get_hw_control sets {CTRL_EXT|SWSM}:DRV_LOAD bit.
+ * e1000e_get_hw_control sets {CTRL_EXT|SWSM}:DRV_LOAD bit.
  * For ASF and Pass Through versions of f/w this means that
  * the driver is loaded. For AMT version (only with 82573)
  * of the f/w this means that the network i/f is open.
  **/
-static void e1000_get_hw_control(struct e1000_adapter *adapter)
+void e1000e_get_hw_control(struct e1000_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
 	u32 ctrl_ext;
@@ -2005,16 +2005,16 @@ static void e1000_get_hw_control(struct e1000_adapter *adapter)
 }
 
 /**
- * e1000_release_hw_control - release control of the h/w to f/w
+ * e1000e_release_hw_control - release control of the h/w to f/w
  * @adapter: address of board private structure
  *
- * e1000_release_hw_control resets {CTRL_EXT|SWSM}:DRV_LOAD bit.
+ * e1000e_release_hw_control resets {CTRL_EXT|SWSM}:DRV_LOAD bit.
  * For ASF and Pass Through versions of f/w this means that the
  * driver is no longer loaded. For AMT version (only with 82573) i
  * of the f/w this means that the network i/f is closed.
  *
  **/
-static void e1000_release_hw_control(struct e1000_adapter *adapter)
+void e1000e_release_hw_control(struct e1000_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
 	u32 ctrl_ext;
@@ -2445,7 +2445,7 @@ static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
 	     E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
 	    (vid == adapter->mng_vlan_id)) {
 		/* release control to f/w */
-		e1000_release_hw_control(adapter);
+		e1000e_release_hw_control(adapter);
 		return;
 	}
 
@@ -3187,7 +3187,6 @@ void e1000e_reset(struct e1000_adapter *adapter)
 		ew32(PBA, pba);
 	}
 
-
 	/*
 	 * flow control settings
 	 *
@@ -3275,7 +3274,7 @@ void e1000e_reset(struct e1000_adapter *adapter)
 	 * that the network interface is in control
 	 */
 	if (adapter->flags & FLAG_HAS_AMT)
-		e1000_get_hw_control(adapter);
+		e1000e_get_hw_control(adapter);
 
 	ew32(WUC, 0);
 
@@ -3288,6 +3287,13 @@ void e1000e_reset(struct e1000_adapter *adapter)
 	ew32(VET, ETH_P_8021Q);
 
 	e1000e_reset_adaptive(hw);
+
+	if (!netif_running(adapter->netdev) &&
+	    !test_bit(__E1000_TESTING, &adapter->state)) {
+		e1000_power_down_phy(adapter);
+		return;
+	}
+
 	e1000_get_phy_info(hw);
 
 	if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN) &&
@@ -3573,7 +3579,7 @@ static int e1000_open(struct net_device *netdev)
 	 * interface is now open and reset the part to a known state.
 	 */
 	if (adapter->flags & FLAG_HAS_AMT) {
-		e1000_get_hw_control(adapter);
+		e1000e_get_hw_control(adapter);
 		e1000e_reset(adapter);
 	}
 
@@ -3637,7 +3643,7 @@ static int e1000_open(struct net_device *netdev)
 	return 0;
 
 err_req_irq:
-	e1000_release_hw_control(adapter);
+	e1000e_release_hw_control(adapter);
 	e1000_power_down_phy(adapter);
 	e1000e_free_rx_resources(adapter);
 err_setup_rx:
@@ -3692,8 +3698,9 @@ static int e1000_close(struct net_device *netdev)
 	 * If AMT is enabled, let the firmware know that the network
 	 * interface is now closed
 	 */
-	if (adapter->flags & FLAG_HAS_AMT)
-		e1000_release_hw_control(adapter);
+	if ((adapter->flags & FLAG_HAS_AMT) &&
+	    !test_bit(__E1000_TESTING, &adapter->state))
+		e1000e_release_hw_control(adapter);
 
 	if ((adapter->flags & FLAG_HAS_ERT) ||
 	    (adapter->hw.mac.type == e1000_pch2lan))
@@ -5212,7 +5219,7 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake,
 	 * Release control of h/w to f/w.  If f/w is AMT enabled, this
 	 * would have already happened in close and is redundant.
 	 */
-	e1000_release_hw_control(adapter);
+	e1000e_release_hw_control(adapter);
 
 	pci_disable_device(pdev);
 
@@ -5369,7 +5376,7 @@ static int __e1000_resume(struct pci_dev *pdev)
 	 * under the control of the driver.
 	 */
 	if (!(adapter->flags & FLAG_HAS_AMT))
-		e1000_get_hw_control(adapter);
+		e1000e_get_hw_control(adapter);
 
 	return 0;
 }
@@ -5616,7 +5623,7 @@ static void e1000_io_resume(struct pci_dev *pdev)
 	 * under the control of the driver.
 	 */
 	if (!(adapter->flags & FLAG_HAS_AMT))
-		e1000_get_hw_control(adapter);
+		e1000e_get_hw_control(adapter);
 
 }
 
@@ -5966,7 +5973,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	 * under the control of the driver.
 	 */
 	if (!(adapter->flags & FLAG_HAS_AMT))
-		e1000_get_hw_control(adapter);
+		e1000e_get_hw_control(adapter);
 
 	strncpy(netdev->name, "eth%d", sizeof(netdev->name) - 1);
 	err = register_netdev(netdev);
@@ -5985,12 +5992,11 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 
 err_register:
 	if (!(adapter->flags & FLAG_HAS_AMT))
-		e1000_release_hw_control(adapter);
+		e1000e_release_hw_control(adapter);
 err_eeprom:
 	if (!e1000_check_reset_block(&adapter->hw))
 		e1000_phy_hw_reset(&adapter->hw);
 err_hw_init:
-
 	kfree(adapter->tx_ring);
 	kfree(adapter->rx_ring);
 err_sw_init:
@@ -6056,7 +6062,7 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
 	 * Release control of h/w to f/w.  If f/w is AMT enabled, this
 	 * would have already happened in close and is redundant.
 	 */
-	e1000_release_hw_control(adapter);
+	e1000e_release_hw_control(adapter);
 
 	e1000e_reset_interrupt_capability(adapter);
 	kfree(adapter->tx_ring);
-- 
cgit v1.2.3


From 77996d1d4c1cf0059f5c2d1cea9d5135ac1b8c91 Mon Sep 17 00:00:00 2001
From: Bruce Allan <bruce.w.allan@intel.com>
Date: Thu, 6 Jan 2011 14:29:53 +0000
Subject: e1000e: add custom set_d[0|3]_lplu_state function pointer for 82574

82574 needs to configure Low Power Link Up (or LPLU) differently than
the other parts in the 8257x family supported by the driver.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/e1000e/82571.c | 56 ++++++++++++++++++++++++++++++++++++++++++++++
 drivers/net/e1000e/hw.h    |  1 +
 2 files changed, 57 insertions(+)

(limited to 'drivers')

diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index 11a273e4ba23..cb6c7b1c1fb8 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -78,6 +78,8 @@ static void e1000_power_down_phy_copper_82571(struct e1000_hw *hw);
 static void e1000_put_hw_semaphore_82573(struct e1000_hw *hw);
 static s32 e1000_get_hw_semaphore_82574(struct e1000_hw *hw);
 static void e1000_put_hw_semaphore_82574(struct e1000_hw *hw);
+static s32 e1000_set_d0_lplu_state_82574(struct e1000_hw *hw, bool active);
+static s32 e1000_set_d3_lplu_state_82574(struct e1000_hw *hw, bool active);
 
 /**
  *  e1000_init_phy_params_82571 - Init PHY func ptrs.
@@ -113,6 +115,8 @@ static s32 e1000_init_phy_params_82571(struct e1000_hw *hw)
 		phy->type		 = e1000_phy_bm;
 		phy->ops.acquire = e1000_get_hw_semaphore_82574;
 		phy->ops.release = e1000_put_hw_semaphore_82574;
+		phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82574;
+		phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_82574;
 		break;
 	default:
 		return -E1000_ERR_PHY;
@@ -655,6 +659,58 @@ static void e1000_put_hw_semaphore_82574(struct e1000_hw *hw)
 	mutex_unlock(&swflag_mutex);
 }
 
+/**
+ *  e1000_set_d0_lplu_state_82574 - Set Low Power Linkup D0 state
+ *  @hw: pointer to the HW structure
+ *  @active: true to enable LPLU, false to disable
+ *
+ *  Sets the LPLU D0 state according to the active flag.
+ *  LPLU will not be activated unless the
+ *  device autonegotiation advertisement meets standards of
+ *  either 10 or 10/100 or 10/100/1000 at all duplexes.
+ *  This is a function pointer entry point only called by
+ *  PHY setup routines.
+ **/
+static s32 e1000_set_d0_lplu_state_82574(struct e1000_hw *hw, bool active)
+{
+	u16 data = er32(POEMB);
+
+	if (active)
+		data |= E1000_PHY_CTRL_D0A_LPLU;
+	else
+		data &= ~E1000_PHY_CTRL_D0A_LPLU;
+
+	ew32(POEMB, data);
+	return 0;
+}
+
+/**
+ *  e1000_set_d3_lplu_state_82574 - Sets low power link up state for D3
+ *  @hw: pointer to the HW structure
+ *  @active: boolean used to enable/disable lplu
+ *
+ *  The low power link up (lplu) state is set to the power management level D3
+ *  when active is true, else clear lplu for D3. LPLU
+ *  is used during Dx states where the power conservation is most important.
+ *  During driver activity, SmartSpeed should be enabled so performance is
+ *  maintained.
+ **/
+static s32 e1000_set_d3_lplu_state_82574(struct e1000_hw *hw, bool active)
+{
+	u16 data = er32(POEMB);
+
+	if (!active) {
+		data &= ~E1000_PHY_CTRL_NOND0A_LPLU;
+	} else if ((hw->phy.autoneg_advertised == E1000_ALL_SPEED_DUPLEX) ||
+		   (hw->phy.autoneg_advertised == E1000_ALL_NOT_GIG) ||
+		   (hw->phy.autoneg_advertised == E1000_ALL_10_SPEED)) {
+		data |= E1000_PHY_CTRL_NOND0A_LPLU;
+	}
+
+	ew32(POEMB, data);
+	return 0;
+}
+
 /**
  *  e1000_acquire_nvm_82571 - Request for access to the EEPROM
  *  @hw: pointer to the HW structure
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index ba302a5c2c30..e774380c7cec 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -83,6 +83,7 @@ enum e1e_registers {
 	E1000_EXTCNF_CTRL  = 0x00F00, /* Extended Configuration Control */
 	E1000_EXTCNF_SIZE  = 0x00F08, /* Extended Configuration Size */
 	E1000_PHY_CTRL     = 0x00F10, /* PHY Control Register in CSR */
+#define E1000_POEMB	E1000_PHY_CTRL	/* PHY OEM Bits */
 	E1000_PBA      = 0x01000, /* Packet Buffer Allocation - RW */
 	E1000_PBS      = 0x01008, /* Packet Buffer Size */
 	E1000_EEMNGCTL = 0x01010, /* MNG EEprom Control */
-- 
cgit v1.2.3


From 5377a4160bb65ee4dd11b4b1d081d86d56d92bff Mon Sep 17 00:00:00 2001
From: Dirk Brandewie <dirk.j.brandewie@intel.com>
Date: Thu, 6 Jan 2011 14:29:54 +0000
Subject: e1000: Add support for the CE4100 reference platform

This patch adds support for the gigabit phys present on the CE4100 reference
platforms.

Signed-off-by:  Dirk Brandewie <dirk.j.brandewie@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/e1000/e1000_hw.c    | 328 +++++++++++++++++++++++++++++++---------
 drivers/net/e1000/e1000_hw.h    |  59 +++++++-
 drivers/net/e1000/e1000_main.c  |  35 +++++
 drivers/net/e1000/e1000_osdep.h |  19 ++-
 4 files changed, 365 insertions(+), 76 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index 77d08e697b74..aed223b1b897 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -130,10 +130,15 @@ static s32 e1000_set_phy_type(struct e1000_hw *hw)
 		if (hw->mac_type == e1000_82541 ||
 		    hw->mac_type == e1000_82541_rev_2 ||
 		    hw->mac_type == e1000_82547 ||
-		    hw->mac_type == e1000_82547_rev_2) {
+		    hw->mac_type == e1000_82547_rev_2)
 			hw->phy_type = e1000_phy_igp;
-			break;
-		}
+		break;
+	case RTL8211B_PHY_ID:
+		hw->phy_type = e1000_phy_8211;
+		break;
+	case RTL8201N_PHY_ID:
+		hw->phy_type = e1000_phy_8201;
+		break;
 	default:
 		/* Should never have loaded on this device */
 		hw->phy_type = e1000_phy_undefined;
@@ -318,6 +323,9 @@ s32 e1000_set_mac_type(struct e1000_hw *hw)
 	case E1000_DEV_ID_82547GI:
 		hw->mac_type = e1000_82547_rev_2;
 		break;
+	case E1000_DEV_ID_INTEL_CE4100_GBE:
+		hw->mac_type = e1000_ce4100;
+		break;
 	default:
 		/* Should never have loaded on this device */
 		return -E1000_ERR_MAC_TYPE;
@@ -372,6 +380,9 @@ void e1000_set_media_type(struct e1000_hw *hw)
 		case e1000_82542_rev2_1:
 			hw->media_type = e1000_media_type_fiber;
 			break;
+		case e1000_ce4100:
+			hw->media_type = e1000_media_type_copper;
+			break;
 		default:
 			status = er32(STATUS);
 			if (status & E1000_STATUS_TBIMODE) {
@@ -460,6 +471,7 @@ s32 e1000_reset_hw(struct e1000_hw *hw)
 		/* Reset is performed on a shadow of the control register */
 		ew32(CTRL_DUP, (ctrl | E1000_CTRL_RST));
 		break;
+	case e1000_ce4100:
 	default:
 		ew32(CTRL, (ctrl | E1000_CTRL_RST));
 		break;
@@ -951,6 +963,67 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
 	return E1000_SUCCESS;
 }
 
+/**
+ * e1000_copper_link_rtl_setup - Copper link setup for e1000_phy_rtl series.
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Commits changes to PHY configuration by calling e1000_phy_reset().
+ */
+static s32 e1000_copper_link_rtl_setup(struct e1000_hw *hw)
+{
+	s32 ret_val;
+
+	/* SW reset the PHY so all changes take effect */
+	ret_val = e1000_phy_reset(hw);
+	if (ret_val) {
+		e_dbg("Error Resetting the PHY\n");
+		return ret_val;
+	}
+
+	return E1000_SUCCESS;
+}
+
+static s32 gbe_dhg_phy_setup(struct e1000_hw *hw)
+{
+	s32 ret_val;
+	u32 ctrl_aux;
+
+	switch (hw->phy_type) {
+	case e1000_phy_8211:
+		ret_val = e1000_copper_link_rtl_setup(hw);
+		if (ret_val) {
+			e_dbg("e1000_copper_link_rtl_setup failed!\n");
+			return ret_val;
+		}
+		break;
+	case e1000_phy_8201:
+		/* Set RMII mode */
+		ctrl_aux = er32(CTL_AUX);
+		ctrl_aux |= E1000_CTL_AUX_RMII;
+		ew32(CTL_AUX, ctrl_aux);
+		E1000_WRITE_FLUSH();
+
+		/* Disable the J/K bits required for receive */
+		ctrl_aux = er32(CTL_AUX);
+		ctrl_aux |= 0x4;
+		ctrl_aux &= ~0x2;
+		ew32(CTL_AUX, ctrl_aux);
+		E1000_WRITE_FLUSH();
+		ret_val = e1000_copper_link_rtl_setup(hw);
+
+		if (ret_val) {
+			e_dbg("e1000_copper_link_rtl_setup failed!\n");
+			return ret_val;
+		}
+		break;
+	default:
+		e_dbg("Error Resetting the PHY\n");
+		return E1000_ERR_PHY_TYPE;
+	}
+
+	return E1000_SUCCESS;
+}
+
 /**
  * e1000_copper_link_preconfig - early configuration for copper
  * @hw: Struct containing variables accessed by shared code
@@ -1286,6 +1359,10 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
 	if (hw->autoneg_advertised == 0)
 		hw->autoneg_advertised = AUTONEG_ADVERTISE_SPEED_DEFAULT;
 
+	/* IFE/RTL8201N PHY only supports 10/100 */
+	if (hw->phy_type == e1000_phy_8201)
+		hw->autoneg_advertised &= AUTONEG_ADVERTISE_10_100_ALL;
+
 	e_dbg("Reconfiguring auto-neg advertisement params\n");
 	ret_val = e1000_phy_setup_autoneg(hw);
 	if (ret_val) {
@@ -1341,7 +1418,7 @@ static s32 e1000_copper_link_postconfig(struct e1000_hw *hw)
 	s32 ret_val;
 	e_dbg("e1000_copper_link_postconfig");
 
-	if (hw->mac_type >= e1000_82544) {
+	if ((hw->mac_type >= e1000_82544) && (hw->mac_type != e1000_ce4100)) {
 		e1000_config_collision_dist(hw);
 	} else {
 		ret_val = e1000_config_mac_to_phy(hw);
@@ -1395,6 +1472,12 @@ static s32 e1000_setup_copper_link(struct e1000_hw *hw)
 		ret_val = e1000_copper_link_mgp_setup(hw);
 		if (ret_val)
 			return ret_val;
+	} else {
+		ret_val = gbe_dhg_phy_setup(hw);
+		if (ret_val) {
+			e_dbg("gbe_dhg_phy_setup failed!\n");
+			return ret_val;
+		}
 	}
 
 	if (hw->autoneg) {
@@ -1461,10 +1544,11 @@ s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
 		return ret_val;
 
 	/* Read the MII 1000Base-T Control Register (Address 9). */
-	ret_val =
-	    e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg);
+	ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg);
 	if (ret_val)
 		return ret_val;
+	else if (hw->phy_type == e1000_phy_8201)
+		mii_1000t_ctrl_reg &= ~REG9_SPEED_MASK;
 
 	/* Need to parse both autoneg_advertised and fc and set up
 	 * the appropriate PHY registers.  First we will parse for
@@ -1577,9 +1661,14 @@ s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
 
 	e_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
 
-	ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
-	if (ret_val)
-		return ret_val;
+	if (hw->phy_type == e1000_phy_8201) {
+		mii_1000t_ctrl_reg = 0;
+	} else {
+		ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL,
+		                              mii_1000t_ctrl_reg);
+		if (ret_val)
+			return ret_val;
+	}
 
 	return E1000_SUCCESS;
 }
@@ -1860,7 +1949,7 @@ static s32 e1000_config_mac_to_phy(struct e1000_hw *hw)
 
 	/* 82544 or newer MAC, Auto Speed Detection takes care of
 	 * MAC speed/duplex configuration.*/
-	if (hw->mac_type >= e1000_82544)
+	if ((hw->mac_type >= e1000_82544) && (hw->mac_type != e1000_ce4100))
 		return E1000_SUCCESS;
 
 	/* Read the Device Control Register and set the bits to Force Speed
@@ -1870,27 +1959,49 @@ static s32 e1000_config_mac_to_phy(struct e1000_hw *hw)
 	ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
 	ctrl &= ~(E1000_CTRL_SPD_SEL | E1000_CTRL_ILOS);
 
-	/* Set up duplex in the Device Control and Transmit Control
-	 * registers depending on negotiated values.
-	 */
-	ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
-	if (ret_val)
-		return ret_val;
+	switch (hw->phy_type) {
+	case e1000_phy_8201:
+		ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data);
+		if (ret_val)
+			return ret_val;
 
-	if (phy_data & M88E1000_PSSR_DPLX)
-		ctrl |= E1000_CTRL_FD;
-	else
-		ctrl &= ~E1000_CTRL_FD;
+		if (phy_data & RTL_PHY_CTRL_FD)
+			ctrl |= E1000_CTRL_FD;
+		else
+			ctrl &= ~E1000_CTRL_FD;
 
-	e1000_config_collision_dist(hw);
+		if (phy_data & RTL_PHY_CTRL_SPD_100)
+			ctrl |= E1000_CTRL_SPD_100;
+		else
+			ctrl |= E1000_CTRL_SPD_10;
 
-	/* Set up speed in the Device Control register depending on
-	 * negotiated values.
-	 */
-	if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS)
-		ctrl |= E1000_CTRL_SPD_1000;
-	else if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_100MBS)
-		ctrl |= E1000_CTRL_SPD_100;
+		e1000_config_collision_dist(hw);
+		break;
+	default:
+		/* Set up duplex in the Device Control and Transmit Control
+		 * registers depending on negotiated values.
+		 */
+		ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
+		                             &phy_data);
+		if (ret_val)
+			return ret_val;
+
+		if (phy_data & M88E1000_PSSR_DPLX)
+			ctrl |= E1000_CTRL_FD;
+		else
+			ctrl &= ~E1000_CTRL_FD;
+
+		e1000_config_collision_dist(hw);
+
+		/* Set up speed in the Device Control register depending on
+		 * negotiated values.
+		 */
+		if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS)
+			ctrl |= E1000_CTRL_SPD_1000;
+		else if ((phy_data & M88E1000_PSSR_SPEED) ==
+		         M88E1000_PSSR_100MBS)
+			ctrl |= E1000_CTRL_SPD_100;
+	}
 
 	/* Write the configured values back to the Device Control Reg. */
 	ew32(CTRL, ctrl);
@@ -2401,7 +2512,8 @@ s32 e1000_check_for_link(struct e1000_hw *hw)
 		 * speed/duplex on the MAC to the current PHY speed/duplex
 		 * settings.
 		 */
-		if (hw->mac_type >= e1000_82544)
+		if ((hw->mac_type >= e1000_82544) &&
+		    (hw->mac_type != e1000_ce4100))
 			e1000_config_collision_dist(hw);
 		else {
 			ret_val = e1000_config_mac_to_phy(hw);
@@ -2738,7 +2850,7 @@ static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
 {
 	u32 i;
 	u32 mdic = 0;
-	const u32 phy_addr = 1;
+	const u32 phy_addr = (hw->mac_type == e1000_ce4100) ? hw->phy_addr : 1;
 
 	e_dbg("e1000_read_phy_reg_ex");
 
@@ -2752,28 +2864,61 @@ static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
 		 * Control register.  The MAC will take care of interfacing with the
 		 * PHY to retrieve the desired data.
 		 */
-		mdic = ((reg_addr << E1000_MDIC_REG_SHIFT) |
-			(phy_addr << E1000_MDIC_PHY_SHIFT) |
-			(E1000_MDIC_OP_READ));
+		if (hw->mac_type == e1000_ce4100) {
+			mdic = ((reg_addr << E1000_MDIC_REG_SHIFT) |
+				(phy_addr << E1000_MDIC_PHY_SHIFT) |
+				(INTEL_CE_GBE_MDIC_OP_READ) |
+				(INTEL_CE_GBE_MDIC_GO));
 
-		ew32(MDIC, mdic);
+			writel(mdic, E1000_MDIO_CMD);
 
-		/* Poll the ready bit to see if the MDI read completed */
-		for (i = 0; i < 64; i++) {
-			udelay(50);
-			mdic = er32(MDIC);
-			if (mdic & E1000_MDIC_READY)
-				break;
-		}
-		if (!(mdic & E1000_MDIC_READY)) {
-			e_dbg("MDI Read did not complete\n");
-			return -E1000_ERR_PHY;
-		}
-		if (mdic & E1000_MDIC_ERROR) {
-			e_dbg("MDI Error\n");
-			return -E1000_ERR_PHY;
+			/* Poll the ready bit to see if the MDI read
+			 * completed
+			 */
+			for (i = 0; i < 64; i++) {
+				udelay(50);
+				mdic = readl(E1000_MDIO_CMD);
+				if (!(mdic & INTEL_CE_GBE_MDIC_GO))
+					break;
+			}
+
+			if (mdic & INTEL_CE_GBE_MDIC_GO) {
+				e_dbg("MDI Read did not complete\n");
+				return -E1000_ERR_PHY;
+			}
+
+			mdic = readl(E1000_MDIO_STS);
+			if (mdic & INTEL_CE_GBE_MDIC_READ_ERROR) {
+				e_dbg("MDI Read Error\n");
+				return -E1000_ERR_PHY;
+			}
+			*phy_data = (u16) mdic;
+		} else {
+			mdic = ((reg_addr << E1000_MDIC_REG_SHIFT) |
+				(phy_addr << E1000_MDIC_PHY_SHIFT) |
+				(E1000_MDIC_OP_READ));
+
+			ew32(MDIC, mdic);
+
+			/* Poll the ready bit to see if the MDI read
+			 * completed
+			 */
+			for (i = 0; i < 64; i++) {
+				udelay(50);
+				mdic = er32(MDIC);
+				if (mdic & E1000_MDIC_READY)
+					break;
+			}
+			if (!(mdic & E1000_MDIC_READY)) {
+				e_dbg("MDI Read did not complete\n");
+				return -E1000_ERR_PHY;
+			}
+			if (mdic & E1000_MDIC_ERROR) {
+				e_dbg("MDI Error\n");
+				return -E1000_ERR_PHY;
+			}
+			*phy_data = (u16) mdic;
 		}
-		*phy_data = (u16) mdic;
 	} else {
 		/* We must first send a preamble through the MDIO pin to signal the
 		 * beginning of an MII instruction.  This is done by sending 32
@@ -2840,7 +2985,7 @@ static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
 {
 	u32 i;
 	u32 mdic = 0;
-	const u32 phy_addr = 1;
+	const u32 phy_addr = (hw->mac_type == e1000_ce4100) ? hw->phy_addr : 1;
 
 	e_dbg("e1000_write_phy_reg_ex");
 
@@ -2850,27 +2995,54 @@ static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
 	}
 
 	if (hw->mac_type > e1000_82543) {
-		/* Set up Op-code, Phy Address, register address, and data intended
-		 * for the PHY register in the MDI Control register.  The MAC will take
-		 * care of interfacing with the PHY to send the desired data.
+		/* Set up Op-code, Phy Address, register address, and data
+		 * intended for the PHY register in the MDI Control register.
+		 * The MAC will take care of interfacing with the PHY to send
+		 * the desired data.
 		 */
-		mdic = (((u32) phy_data) |
-			(reg_addr << E1000_MDIC_REG_SHIFT) |
-			(phy_addr << E1000_MDIC_PHY_SHIFT) |
-			(E1000_MDIC_OP_WRITE));
+		if (hw->mac_type == e1000_ce4100) {
+			mdic = (((u32) phy_data) |
+				(reg_addr << E1000_MDIC_REG_SHIFT) |
+				(phy_addr << E1000_MDIC_PHY_SHIFT) |
+				(INTEL_CE_GBE_MDIC_OP_WRITE) |
+				(INTEL_CE_GBE_MDIC_GO));
 
-		ew32(MDIC, mdic);
+			writel(mdic, E1000_MDIO_CMD);
 
-		/* Poll the ready bit to see if the MDI read completed */
-		for (i = 0; i < 641; i++) {
-			udelay(5);
-			mdic = er32(MDIC);
-			if (mdic & E1000_MDIC_READY)
-				break;
-		}
-		if (!(mdic & E1000_MDIC_READY)) {
-			e_dbg("MDI Write did not complete\n");
-			return -E1000_ERR_PHY;
+			/* Poll the ready bit to see if the MDI read
+			 * completed
+			 */
+			for (i = 0; i < 640; i++) {
+				udelay(5);
+				mdic = readl(E1000_MDIO_CMD);
+				if (!(mdic & INTEL_CE_GBE_MDIC_GO))
+					break;
+			}
+			if (mdic & INTEL_CE_GBE_MDIC_GO) {
+				e_dbg("MDI Write did not complete\n");
+				return -E1000_ERR_PHY;
+			}
+		} else {
+			mdic = (((u32) phy_data) |
+				(reg_addr << E1000_MDIC_REG_SHIFT) |
+				(phy_addr << E1000_MDIC_PHY_SHIFT) |
+				(E1000_MDIC_OP_WRITE));
+
+			ew32(MDIC, mdic);
+
+			/* Poll the ready bit to see if the MDI read
+			 * completed
+			 */
+			for (i = 0; i < 641; i++) {
+				udelay(5);
+				mdic = er32(MDIC);
+				if (mdic & E1000_MDIC_READY)
+					break;
+			}
+			if (!(mdic & E1000_MDIC_READY)) {
+				e_dbg("MDI Write did not complete\n");
+				return -E1000_ERR_PHY;
+			}
 		}
 	} else {
 		/* We'll need to use the SW defined pins to shift the write command
@@ -3048,6 +3220,11 @@ static s32 e1000_detect_gig_phy(struct e1000_hw *hw)
 		if (hw->phy_id == M88E1011_I_PHY_ID)
 			match = true;
 		break;
+	case e1000_ce4100:
+		if ((hw->phy_id == RTL8211B_PHY_ID) ||
+		    (hw->phy_id == RTL8201N_PHY_ID))
+			match = true;
+		break;
 	case e1000_82541:
 	case e1000_82541_rev_2:
 	case e1000_82547:
@@ -3291,6 +3468,9 @@ s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info)
 
 	if (hw->phy_type == e1000_phy_igp)
 		return e1000_phy_igp_get_info(hw, phy_info);
+	else if ((hw->phy_type == e1000_phy_8211) ||
+	         (hw->phy_type == e1000_phy_8201))
+		return E1000_SUCCESS;
 	else
 		return e1000_phy_m88_get_info(hw, phy_info);
 }
@@ -3742,6 +3922,12 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
 
 	e_dbg("e1000_read_eeprom");
 
+	if (hw->mac_type == e1000_ce4100) {
+		GBE_CONFIG_FLASH_READ(GBE_CONFIG_BASE_VIRT, offset, words,
+		                      data);
+		return E1000_SUCCESS;
+	}
+
 	/* If eeprom is not yet detected, do so now */
 	if (eeprom->word_size == 0)
 		e1000_init_eeprom_params(hw);
@@ -3904,6 +4090,12 @@ static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
 
 	e_dbg("e1000_write_eeprom");
 
+	if (hw->mac_type == e1000_ce4100) {
+		GBE_CONFIG_FLASH_WRITE(GBE_CONFIG_BASE_VIRT, offset, words,
+		                       data);
+		return E1000_SUCCESS;
+	}
+
 	/* If eeprom is not yet detected, do so now */
 	if (eeprom->word_size == 0)
 		e1000_init_eeprom_params(hw);
diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h
index ecd9f6c6bcd5..f5514a0d5be6 100644
--- a/drivers/net/e1000/e1000_hw.h
+++ b/drivers/net/e1000/e1000_hw.h
@@ -52,6 +52,7 @@ typedef enum {
 	e1000_82545,
 	e1000_82545_rev_3,
 	e1000_82546,
+	e1000_ce4100,
 	e1000_82546_rev_3,
 	e1000_82541,
 	e1000_82541_rev_2,
@@ -209,9 +210,11 @@ typedef enum {
 } e1000_1000t_rx_status;
 
 typedef enum {
-    e1000_phy_m88 = 0,
-    e1000_phy_igp,
-    e1000_phy_undefined = 0xFF
+	e1000_phy_m88 = 0,
+	e1000_phy_igp,
+	e1000_phy_8211,
+	e1000_phy_8201,
+	e1000_phy_undefined = 0xFF
 } e1000_phy_type;
 
 typedef enum {
@@ -442,6 +445,7 @@ void e1000_io_write(struct e1000_hw *hw, unsigned long port, u32 value);
 #define E1000_DEV_ID_82547EI             0x1019
 #define E1000_DEV_ID_82547EI_MOBILE      0x101A
 #define E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 0x10B5
+#define E1000_DEV_ID_INTEL_CE4100_GBE    0x2E6E
 
 #define NODE_ADDRESS_SIZE 6
 #define ETH_LENGTH_OF_ADDRESS 6
@@ -808,6 +812,16 @@ struct e1000_ffvt_entry {
 #define E1000_CTRL_EXT 0x00018	/* Extended Device Control - RW */
 #define E1000_FLA      0x0001C	/* Flash Access - RW */
 #define E1000_MDIC     0x00020	/* MDI Control - RW */
+
+extern void __iomem *ce4100_gbe_mdio_base_virt;
+#define INTEL_CE_GBE_MDIO_RCOMP_BASE    (ce4100_gbe_mdio_base_virt)
+#define E1000_MDIO_STS  (INTEL_CE_GBE_MDIO_RCOMP_BASE + 0)
+#define E1000_MDIO_CMD  (INTEL_CE_GBE_MDIO_RCOMP_BASE + 4)
+#define E1000_MDIO_DRV  (INTEL_CE_GBE_MDIO_RCOMP_BASE + 8)
+#define E1000_MDC_CMD   (INTEL_CE_GBE_MDIO_RCOMP_BASE + 0xC)
+#define E1000_RCOMP_CTL (INTEL_CE_GBE_MDIO_RCOMP_BASE + 0x20)
+#define E1000_RCOMP_STS (INTEL_CE_GBE_MDIO_RCOMP_BASE + 0x24)
+
 #define E1000_SCTL     0x00024	/* SerDes Control - RW */
 #define E1000_FEXTNVM  0x00028	/* Future Extended NVM register */
 #define E1000_FCAL     0x00028	/* Flow Control Address Low - RW */
@@ -820,6 +834,34 @@ struct e1000_ffvt_entry {
 #define E1000_IMS      0x000D0	/* Interrupt Mask Set - RW */
 #define E1000_IMC      0x000D8	/* Interrupt Mask Clear - WO */
 #define E1000_IAM      0x000E0	/* Interrupt Acknowledge Auto Mask */
+
+/* Auxiliary Control Register. This register is CE4100 specific,
+ * RMII/RGMII function is switched by this register - RW
+ * Following are bits definitions of the Auxiliary Control Register
+ */
+#define E1000_CTL_AUX  0x000E0
+#define E1000_CTL_AUX_END_SEL_SHIFT     10
+#define E1000_CTL_AUX_ENDIANESS_SHIFT   8
+#define E1000_CTL_AUX_RGMII_RMII_SHIFT  0
+
+/* descriptor and packet transfer use CTL_AUX.ENDIANESS */
+#define E1000_CTL_AUX_DES_PKT   (0x0 << E1000_CTL_AUX_END_SEL_SHIFT)
+/* descriptor use CTL_AUX.ENDIANESS, packet use default */
+#define E1000_CTL_AUX_DES       (0x1 << E1000_CTL_AUX_END_SEL_SHIFT)
+/* descriptor use default, packet use CTL_AUX.ENDIANESS */
+#define E1000_CTL_AUX_PKT       (0x2 << E1000_CTL_AUX_END_SEL_SHIFT)
+/* all use CTL_AUX.ENDIANESS */
+#define E1000_CTL_AUX_ALL       (0x3 << E1000_CTL_AUX_END_SEL_SHIFT)
+
+#define E1000_CTL_AUX_RGMII     (0x0 << E1000_CTL_AUX_RGMII_RMII_SHIFT)
+#define E1000_CTL_AUX_RMII      (0x1 << E1000_CTL_AUX_RGMII_RMII_SHIFT)
+
+/* LW little endian, Byte big endian */
+#define E1000_CTL_AUX_LWLE_BBE  (0x0 << E1000_CTL_AUX_ENDIANESS_SHIFT)
+#define E1000_CTL_AUX_LWLE_BLE  (0x1 << E1000_CTL_AUX_ENDIANESS_SHIFT)
+#define E1000_CTL_AUX_LWBE_BBE  (0x2 << E1000_CTL_AUX_ENDIANESS_SHIFT)
+#define E1000_CTL_AUX_LWBE_BLE  (0x3 << E1000_CTL_AUX_ENDIANESS_SHIFT)
+
 #define E1000_RCTL     0x00100	/* RX Control - RW */
 #define E1000_RDTR1    0x02820	/* RX Delay Timer (1) - RW */
 #define E1000_RDBAL1   0x02900	/* RX Descriptor Base Address Low (1) - RW */
@@ -1011,6 +1053,7 @@ struct e1000_ffvt_entry {
  * in more current versions of the 8254x. Despite the difference in location,
  * the registers function in the same manner.
  */
+#define E1000_82542_CTL_AUX  E1000_CTL_AUX
 #define E1000_82542_CTRL     E1000_CTRL
 #define E1000_82542_CTRL_DUP E1000_CTRL_DUP
 #define E1000_82542_STATUS   E1000_STATUS
@@ -1571,6 +1614,11 @@ struct e1000_hw {
 #define E1000_MDIC_INT_EN    0x20000000
 #define E1000_MDIC_ERROR     0x40000000
 
+#define INTEL_CE_GBE_MDIC_OP_WRITE      0x04000000
+#define INTEL_CE_GBE_MDIC_OP_READ       0x00000000
+#define INTEL_CE_GBE_MDIC_GO            0x80000000
+#define INTEL_CE_GBE_MDIC_READ_ERROR    0x80000000
+
 #define E1000_KUMCTRLSTA_MASK           0x0000FFFF
 #define E1000_KUMCTRLSTA_OFFSET         0x001F0000
 #define E1000_KUMCTRLSTA_OFFSET_SHIFT   16
@@ -2871,6 +2919,11 @@ struct e1000_host_command_info {
 #define M88E1111_I_PHY_ID  0x01410CC0
 #define L1LXT971A_PHY_ID   0x001378E0
 
+#define RTL8211B_PHY_ID    0x001CC910
+#define RTL8201N_PHY_ID    0x8200
+#define RTL_PHY_CTRL_FD    0x0100 /* Full duplex.0=half; 1=full */
+#define RTL_PHY_CTRL_SPD_100    0x200000 /* Force 100Mb */
+
 /* Bits...
  * 15-5: page
  * 4-0: register offset
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 340e12d2e4a9..4ff88a683f61 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -28,6 +28,12 @@
 
 #include "e1000.h"
 #include <net/ip6_checksum.h>
+#include <linux/io.h>
+
+/* Intel Media SOC GbE MDIO physical base address */
+static unsigned long ce4100_gbe_mdio_base_phy;
+/* Intel Media SOC GbE MDIO virtual base address */
+void __iomem *ce4100_gbe_mdio_base_virt;
 
 char e1000_driver_name[] = "e1000";
 static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
@@ -79,6 +85,7 @@ static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl) = {
 	INTEL_E1000_ETHERNET_DEVICE(0x108A),
 	INTEL_E1000_ETHERNET_DEVICE(0x1099),
 	INTEL_E1000_ETHERNET_DEVICE(0x10B5),
+	INTEL_E1000_ETHERNET_DEVICE(0x2E6E),
 	/* required last entry */
 	{0,}
 };
@@ -459,6 +466,7 @@ static void e1000_power_down_phy(struct e1000_adapter *adapter)
 		case e1000_82545:
 		case e1000_82545_rev_3:
 		case e1000_82546:
+		case e1000_ce4100:
 		case e1000_82546_rev_3:
 		case e1000_82541:
 		case e1000_82541_rev_2:
@@ -573,6 +581,7 @@ void e1000_reset(struct e1000_adapter *adapter)
 	case e1000_82545:
 	case e1000_82545_rev_3:
 	case e1000_82546:
+	case e1000_ce4100:
 	case e1000_82546_rev_3:
 		pba = E1000_PBA_48K;
 		break;
@@ -894,6 +903,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	static int global_quad_port_a = 0; /* global ksp3 port a indication */
 	int i, err, pci_using_dac;
 	u16 eeprom_data = 0;
+	u16 tmp = 0;
 	u16 eeprom_apme_mask = E1000_EEPROM_APME;
 	int bars, need_ioport;
 
@@ -996,6 +1006,14 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 		goto err_sw_init;
 
 	err = -EIO;
+	if (hw->mac_type == e1000_ce4100) {
+		ce4100_gbe_mdio_base_phy = pci_resource_start(pdev, BAR_1);
+		ce4100_gbe_mdio_base_virt = ioremap(ce4100_gbe_mdio_base_phy,
+		                                pci_resource_len(pdev, BAR_1));
+
+		if (!ce4100_gbe_mdio_base_virt)
+			goto err_mdio_ioremap;
+	}
 
 	if (hw->mac_type >= e1000_82543) {
 		netdev->features = NETIF_F_SG |
@@ -1135,6 +1153,20 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	adapter->wol = adapter->eeprom_wol;
 	device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
 
+	/* Auto detect PHY address */
+	if (hw->mac_type == e1000_ce4100) {
+		for (i = 0; i < 32; i++) {
+			hw->phy_addr = i;
+			e1000_read_phy_reg(hw, PHY_ID2, &tmp);
+			if (tmp == 0 || tmp == 0xFF) {
+				if (i == 31)
+					goto err_eeprom;
+				continue;
+			} else
+				break;
+		}
+	}
+
 	/* reset the hardware with the new settings */
 	e1000_reset(adapter);
 
@@ -1171,6 +1203,8 @@ err_eeprom:
 	kfree(adapter->rx_ring);
 err_dma:
 err_sw_init:
+err_mdio_ioremap:
+	iounmap(ce4100_gbe_mdio_base_virt);
 	iounmap(hw->hw_addr);
 err_ioremap:
 	free_netdev(netdev);
@@ -1409,6 +1443,7 @@ static bool e1000_check_64k_bound(struct e1000_adapter *adapter, void *start,
 	/* First rev 82545 and 82546 need to not allow any memory
 	 * write location to cross 64k boundary due to errata 23 */
 	if (hw->mac_type == e1000_82545 ||
+	    hw->mac_type == e1000_ce4100 ||
 	    hw->mac_type == e1000_82546) {
 		return ((begin ^ (end - 1)) >> 16) != 0 ? false : true;
 	}
diff --git a/drivers/net/e1000/e1000_osdep.h b/drivers/net/e1000/e1000_osdep.h
index edd1c75aa895..55c1711f1688 100644
--- a/drivers/net/e1000/e1000_osdep.h
+++ b/drivers/net/e1000/e1000_osdep.h
@@ -34,12 +34,21 @@
 #ifndef _E1000_OSDEP_H_
 #define _E1000_OSDEP_H_
 
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
 #include <asm/io.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
+
+#define CONFIG_RAM_BASE         0x60000
+#define GBE_CONFIG_OFFSET       0x0
+
+#define GBE_CONFIG_RAM_BASE \
+	((unsigned int)(CONFIG_RAM_BASE + GBE_CONFIG_OFFSET))
+
+#define GBE_CONFIG_BASE_VIRT    phys_to_virt(GBE_CONFIG_RAM_BASE)
+
+#define GBE_CONFIG_FLASH_WRITE(base, offset, count, data) \
+	(iowrite16_rep(base + offset, data, count))
+
+#define GBE_CONFIG_FLASH_READ(base, offset, count, data) \
+	(ioread16_rep(base + (offset << 1), data, count))
 
 #define er32(reg)							\
 	(readl(hw->hw_addr + ((hw->mac_type >= e1000_82543)		\
-- 
cgit v1.2.3


From 2d39d576fad0fd4bb79a0de26fca50a4be1ffdc1 Mon Sep 17 00:00:00 2001
From: Yi Zou <yi.zou@intel.com>
Date: Thu, 6 Jan 2011 14:29:56 +0000
Subject: ixgbe: make sure per Rx queue is disabled before unmapping the
 receive buffer

When disable the Rx logic globally, we would also want to disable the per Rx
queue receive logic by per queue Rx control register RXDCTL so no more DMA is
happening from the packet buffer to the receive buffer associated with the Rx
ring, before we start unmapping Rx ring receive buffer. The hardware may take
max of 100us before the corresponding Rx queue is really disabled. Added
ixgbe_disable_rx_queue() for this purpose.

Signed-off-by: Yi Zou <yi.zou@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbe/ixgbe.h         |  2 ++
 drivers/net/ixgbe/ixgbe_ethtool.c |  4 +---
 drivers/net/ixgbe/ixgbe_main.c    | 40 +++++++++++++++++++++++++++++++++++----
 3 files changed, 39 insertions(+), 7 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h
index 3ae30b8cb7d6..bdeaa9e06c00 100644
--- a/drivers/net/ixgbe/ixgbe.h
+++ b/drivers/net/ixgbe/ixgbe.h
@@ -508,6 +508,8 @@ extern void ixgbe_free_rx_resources(struct ixgbe_ring *);
 extern void ixgbe_free_tx_resources(struct ixgbe_ring *);
 extern void ixgbe_configure_rx_ring(struct ixgbe_adapter *,struct ixgbe_ring *);
 extern void ixgbe_configure_tx_ring(struct ixgbe_adapter *,struct ixgbe_ring *);
+extern void ixgbe_disable_rx_queue(struct ixgbe_adapter *adapter,
+				   struct ixgbe_ring *);
 extern void ixgbe_update_stats(struct ixgbe_adapter *adapter);
 extern int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter);
 extern void ixgbe_clear_interrupt_scheme(struct ixgbe_adapter *adapter);
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index 23ff23e8b393..a8bab1564d07 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -1477,9 +1477,7 @@ static void ixgbe_free_desc_rings(struct ixgbe_adapter *adapter)
 	reg_ctl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
 	reg_ctl &= ~IXGBE_RXCTRL_RXEN;
 	IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, reg_ctl);
-	reg_ctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(rx_ring->reg_idx));
-	reg_ctl &= ~IXGBE_RXDCTL_ENABLE;
-	IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(rx_ring->reg_idx), reg_ctl);
+	ixgbe_disable_rx_queue(adapter, rx_ring);
 
 	/* now Tx */
 	reg_ctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(tx_ring->reg_idx));
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 38ab4f3f8197..e8ae311bbbe5 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -3024,6 +3024,36 @@ static void ixgbe_rx_desc_queue_enable(struct ixgbe_adapter *adapter,
 	}
 }
 
+void ixgbe_disable_rx_queue(struct ixgbe_adapter *adapter,
+			    struct ixgbe_ring *ring)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	int wait_loop = IXGBE_MAX_RX_DESC_POLL;
+	u32 rxdctl;
+	u8 reg_idx = ring->reg_idx;
+
+	rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(reg_idx));
+	rxdctl &= ~IXGBE_RXDCTL_ENABLE;
+
+	/* write value back with RXDCTL.ENABLE bit cleared */
+	IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(reg_idx), rxdctl);
+
+	if (hw->mac.type == ixgbe_mac_82598EB &&
+	    !(IXGBE_READ_REG(hw, IXGBE_LINKS) & IXGBE_LINKS_UP))
+		return;
+
+	/* the hardware may take up to 100us to really disable the rx queue */
+	do {
+		udelay(10);
+		rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(reg_idx));
+	} while (--wait_loop && (rxdctl & IXGBE_RXDCTL_ENABLE));
+
+	if (!wait_loop) {
+		e_err(drv, "RXDCTL.ENABLE on Rx queue %d not cleared within "
+		      "the polling period\n", reg_idx);
+	}
+}
+
 void ixgbe_configure_rx_ring(struct ixgbe_adapter *adapter,
 			     struct ixgbe_ring *ring)
 {
@@ -3034,9 +3064,7 @@ void ixgbe_configure_rx_ring(struct ixgbe_adapter *adapter,
 
 	/* disable queue to avoid issues while updating state */
 	rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(reg_idx));
-	IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(reg_idx),
-			rxdctl & ~IXGBE_RXDCTL_ENABLE);
-	IXGBE_WRITE_FLUSH(hw);
+	ixgbe_disable_rx_queue(adapter, ring);
 
 	IXGBE_WRITE_REG(hw, IXGBE_RDBAL(reg_idx), (rdba & DMA_BIT_MASK(32)));
 	IXGBE_WRITE_REG(hw, IXGBE_RDBAH(reg_idx), (rdba >> 32));
@@ -4064,7 +4092,11 @@ void ixgbe_down(struct ixgbe_adapter *adapter)
 	rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
 	IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl & ~IXGBE_RXCTRL_RXEN);
 
-	IXGBE_WRITE_FLUSH(hw);
+	/* disable all enabled rx queues */
+	for (i = 0; i < adapter->num_rx_queues; i++)
+		/* this call also flushes the previous write */
+		ixgbe_disable_rx_queue(adapter, adapter->rx_ring[i]);
+
 	msleep(10);
 
 	netif_tx_stop_all_queues(netdev);
-- 
cgit v1.2.3


From 905e4a4163c4e807daf1f1f6b8f958e762a834a8 Mon Sep 17 00:00:00 2001
From: Alexander Duyck <alexander.h.duyck@intel.com>
Date: Thu, 6 Jan 2011 14:29:57 +0000
Subject: ixgbe: cleanup flow director hash computation to improve performance

This change cleans up the layout of the flow director data, and the
algorithm used to calculate the hash resulting in a 35x / 3500% performance
increase versus the old flow director hash computation.  The overall effect
is only a 1% increase in transactions per second though due to the fact
that only 1 packet in 20 are actually hashed upon.

TCP_RR before:
Socket Size   Request  Resp.   Elapsed  Trans.
Send   Recv   Size     Size    Time     Rate
bytes  Bytes  bytes    bytes   secs.    per sec

16384  87380  1        1       60.00    23059.27
16384  87380

TCP_RR after:
Socket Size   Request  Resp.   Elapsed  Trans.
Send   Recv   Size     Size    Time     Rate
bytes  Bytes  bytes    bytes   secs.    per sec

16384  87380  1        1       60.00    23239.98
16384  87380

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbe/ixgbe.h         |  18 +-
 drivers/net/ixgbe/ixgbe_82599.c   | 335 ++++++++++++++------------------------
 drivers/net/ixgbe/ixgbe_ethtool.c |   4 +-
 drivers/net/ixgbe/ixgbe_main.c    |  11 +-
 drivers/net/ixgbe/ixgbe_type.h    |  67 +++++---
 5 files changed, 182 insertions(+), 253 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h
index bdeaa9e06c00..2666e69d328c 100644
--- a/drivers/net/ixgbe/ixgbe.h
+++ b/drivers/net/ixgbe/ixgbe.h
@@ -526,25 +526,25 @@ extern s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw);
 extern s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 pballoc);
 extern s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 pballoc);
 extern s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw,
-                                                 struct ixgbe_atr_input *input,
+                                                 union ixgbe_atr_input *input,
                                                  u8 queue);
 extern s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw,
-                                      struct ixgbe_atr_input *input,
+                                      union ixgbe_atr_input *input,
                                       struct ixgbe_atr_input_masks *input_masks,
                                       u16 soft_id, u8 queue);
-extern s32 ixgbe_atr_set_vlan_id_82599(struct ixgbe_atr_input *input,
+extern s32 ixgbe_atr_set_vlan_id_82599(union ixgbe_atr_input *input,
                                        u16 vlan_id);
-extern s32 ixgbe_atr_set_src_ipv4_82599(struct ixgbe_atr_input *input,
+extern s32 ixgbe_atr_set_src_ipv4_82599(union ixgbe_atr_input *input,
                                         u32 src_addr);
-extern s32 ixgbe_atr_set_dst_ipv4_82599(struct ixgbe_atr_input *input,
+extern s32 ixgbe_atr_set_dst_ipv4_82599(union ixgbe_atr_input *input,
                                         u32 dst_addr);
-extern s32 ixgbe_atr_set_src_port_82599(struct ixgbe_atr_input *input,
+extern s32 ixgbe_atr_set_src_port_82599(union ixgbe_atr_input *input,
                                         u16 src_port);
-extern s32 ixgbe_atr_set_dst_port_82599(struct ixgbe_atr_input *input,
+extern s32 ixgbe_atr_set_dst_port_82599(union ixgbe_atr_input *input,
                                         u16 dst_port);
-extern s32 ixgbe_atr_set_flex_byte_82599(struct ixgbe_atr_input *input,
+extern s32 ixgbe_atr_set_flex_byte_82599(union ixgbe_atr_input *input,
                                          u16 flex_byte);
-extern s32 ixgbe_atr_set_l4type_82599(struct ixgbe_atr_input *input,
+extern s32 ixgbe_atr_set_l4type_82599(union ixgbe_atr_input *input,
                                       u8 l4type);
 extern void ixgbe_configure_rscctl(struct ixgbe_adapter *adapter,
                                    struct ixgbe_ring *ring);
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index bfd3c227cd4a..40aa3c29dc1d 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -1003,7 +1003,7 @@ s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw)
 		udelay(10);
 	}
 	if (i >= IXGBE_FDIRCMD_CMD_POLL) {
-		hw_dbg(hw ,"Flow Director previous command isn't complete, "
+		hw_dbg(hw, "Flow Director previous command isn't complete, "
 		       "aborting table re-initialization.\n");
 		return IXGBE_ERR_FDIR_REINIT_FAILED;
 	}
@@ -1113,13 +1113,10 @@ s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 pballoc)
 	/* Move the flexible bytes to use the ethertype - shift 6 words */
 	fdirctrl |= (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT);
 
-	fdirctrl |= IXGBE_FDIRCTRL_REPORT_STATUS;
 
 	/* Prime the keys for hashing */
-	IXGBE_WRITE_REG(hw, IXGBE_FDIRHKEY,
-	                htonl(IXGBE_ATR_BUCKET_HASH_KEY));
-	IXGBE_WRITE_REG(hw, IXGBE_FDIRSKEY,
-	                htonl(IXGBE_ATR_SIGNATURE_HASH_KEY));
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRHKEY, IXGBE_ATR_BUCKET_HASH_KEY);
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRSKEY, IXGBE_ATR_SIGNATURE_HASH_KEY);
 
 	/*
 	 * Poll init-done after we write the register.  Estimated times:
@@ -1209,10 +1206,8 @@ s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 pballoc)
 	fdirctrl |= (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT);
 
 	/* Prime the keys for hashing */
-	IXGBE_WRITE_REG(hw, IXGBE_FDIRHKEY,
-	                htonl(IXGBE_ATR_BUCKET_HASH_KEY));
-	IXGBE_WRITE_REG(hw, IXGBE_FDIRSKEY,
-	                htonl(IXGBE_ATR_SIGNATURE_HASH_KEY));
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRHKEY, IXGBE_ATR_BUCKET_HASH_KEY);
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRSKEY, IXGBE_ATR_SIGNATURE_HASH_KEY);
 
 	/*
 	 * Poll init-done after we write the register.  Estimated times:
@@ -1251,8 +1246,8 @@ s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 pballoc)
  *  @stream: input bitstream to compute the hash on
  *  @key: 32-bit hash key
  **/
-static u16 ixgbe_atr_compute_hash_82599(struct ixgbe_atr_input *atr_input,
-                                        u32 key)
+static u32 ixgbe_atr_compute_hash_82599(union ixgbe_atr_input *atr_input,
+					u32 key)
 {
 	/*
 	 * The algorithm is as follows:
@@ -1272,100 +1267,68 @@ static u16 ixgbe_atr_compute_hash_82599(struct ixgbe_atr_input *atr_input,
 	 *    To simplify for programming, the algorithm is implemented
 	 *    in software this way:
 	 *
-	 *    Key[31:0], Stream[335:0]
+	 *    key[31:0], hi_hash_dword[31:0], lo_hash_dword[31:0], hash[15:0]
+	 *
+	 *    for (i = 0; i < 352; i+=32)
+	 *        hi_hash_dword[31:0] ^= Stream[(i+31):i];
+	 *
+	 *    lo_hash_dword[15:0]  ^= Stream[15:0];
+	 *    lo_hash_dword[15:0]  ^= hi_hash_dword[31:16];
+	 *    lo_hash_dword[31:16] ^= hi_hash_dword[15:0];
+	 *
+	 *    hi_hash_dword[31:0]  ^= Stream[351:320];
 	 *
-	 *    tmp_key[11 * 32 - 1:0] = 11{Key[31:0] = key concatenated 11 times
-	 *    int_key[350:0] = tmp_key[351:1]
-	 *    int_stream[365:0] = Stream[14:0] | Stream[335:0] | Stream[335:321]
+	 *    if(key[0])
+	 *        hash[15:0] ^= Stream[15:0];
 	 *
-	 *    hash[15:0] = 0;
-	 *    for (i = 0; i < 351; i++) {
-	 *        if (int_key[i])
-	 *            hash ^= int_stream[(i + 15):i];
+	 *    for (i = 0; i < 16; i++) {
+	 *        if (key[i])
+	 *            hash[15:0] ^= lo_hash_dword[(i+15):i];
+	 *        if (key[i + 16])
+	 *            hash[15:0] ^= hi_hash_dword[(i+15):i];
 	 *    }
+	 *
 	 */
+	__be32 common_hash_dword = 0;
+	u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan;
+	u32 hash_result = 0;
+	u8 i;
 
-	union {
-		u64    fill[6];
-		u32    key[11];
-		u8     key_stream[44];
-	} tmp_key;
+	/* record the flow_vm_vlan bits as they are a key part to the hash */
+	flow_vm_vlan = ntohl(atr_input->dword_stream[0]);
 
-	u8   *stream = (u8 *)atr_input;
-	u8   int_key[44];      /* upper-most bit unused */
-	u8   hash_str[46];     /* upper-most 2 bits unused */
-	u16  hash_result = 0;
-	int  i, j, k, h;
+	/* generate common hash dword */
+	for (i = 10; i; i -= 2)
+		common_hash_dword ^= atr_input->dword_stream[i] ^
+				     atr_input->dword_stream[i - 1];
 
-	/*
-	 * Initialize the fill member to prevent warnings
-	 * on some compilers
-	 */
-	 tmp_key.fill[0] = 0;
+	hi_hash_dword = ntohl(common_hash_dword);
 
-	/* First load the temporary key stream */
-	for (i = 0; i < 6; i++) {
-		u64 fillkey = ((u64)key << 32) | key;
-		tmp_key.fill[i] = fillkey;
-	}
+	/* low dword is word swapped version of common */
+	lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16);
 
-	/*
-	 * Set the interim key for the hashing.  Bit 352 is unused, so we must
-	 * shift and compensate when building the key.
-	 */
+	/* apply flow ID/VM pool/VLAN ID bits to hash words */
+	hi_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan >> 16);
 
-	int_key[0] = tmp_key.key_stream[0] >> 1;
-	for (i = 1, j = 0; i < 44; i++) {
-		unsigned int this_key = tmp_key.key_stream[j] << 7;
-		j++;
-		int_key[i] = (u8)(this_key | (tmp_key.key_stream[j] >> 1));
-	}
+	/* Process bits 0 and 16 */
+	if (key & 0x0001) hash_result ^= lo_hash_dword;
+	if (key & 0x00010000) hash_result ^= hi_hash_dword;
 
 	/*
-	 * Set the interim bit string for the hashing.  Bits 368 and 367 are
-	 * unused, so shift and compensate when building the string.
+	 * apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to
+	 * delay this because bit 0 of the stream should not be processed
+	 * so we do not add the vlan until after bit 0 was processed
 	 */
-	hash_str[0] = (stream[40] & 0x7f) >> 1;
-	for (i = 1, j = 40; i < 46; i++) {
-		unsigned int this_str = stream[j] << 7;
-		j++;
-		if (j > 41)
-			j = 0;
-		hash_str[i] = (u8)(this_str | (stream[j] >> 1));
-	}
+	lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16);
 
-	/*
-	 * Now compute the hash.  i is the index into hash_str, j is into our
-	 * key stream, k is counting the number of bits, and h interates within
-	 * each byte.
-	 */
-	for (i = 45, j = 43, k = 0; k < 351 && i >= 2 && j >= 0; i--, j--) {
-		for (h = 0; h < 8 && k < 351; h++, k++) {
-			if (int_key[j] & (1 << h)) {
-				/*
-				 * Key bit is set, XOR in the current 16-bit
-				 * string.  Example of processing:
-				 *    h = 0,
-				 *      tmp = (hash_str[i - 2] & 0 << 16) |
-				 *            (hash_str[i - 1] & 0xff << 8) |
-				 *            (hash_str[i] & 0xff >> 0)
-				 *      So tmp = hash_str[15 + k:k], since the
-				 *      i + 2 clause rolls off the 16-bit value
-				 *    h = 7,
-				 *      tmp = (hash_str[i - 2] & 0x7f << 9) |
-				 *            (hash_str[i - 1] & 0xff << 1) |
-				 *            (hash_str[i] & 0x80 >> 7)
-				 */
-				int tmp = (hash_str[i] >> h);
-				tmp |= (hash_str[i - 1] << (8 - h));
-				tmp |= (int)(hash_str[i - 2] & ((1 << h) - 1))
-				             << (16 - h);
-				hash_result ^= (u16)tmp;
-			}
-		}
+
+	/* process the remaining 30 bits in the key 2 bits at a time */
+	for (i = 15; i; i-- ) {
+		if (key & (0x0001 << i)) hash_result ^= lo_hash_dword >> i;
+		if (key & (0x00010000 << i)) hash_result ^= hi_hash_dword >> i;
 	}
 
-	return hash_result;
+	return hash_result & IXGBE_ATR_HASH_MASK;
 }
 
 /**
@@ -1373,10 +1336,9 @@ static u16 ixgbe_atr_compute_hash_82599(struct ixgbe_atr_input *atr_input,
  *  @input: input stream to modify
  *  @vlan: the VLAN id to load
  **/
-s32 ixgbe_atr_set_vlan_id_82599(struct ixgbe_atr_input *input, u16 vlan)
+s32 ixgbe_atr_set_vlan_id_82599(union ixgbe_atr_input *input, __be16 vlan)
 {
-	input->byte_stream[IXGBE_ATR_VLAN_OFFSET + 1] = vlan >> 8;
-	input->byte_stream[IXGBE_ATR_VLAN_OFFSET] = vlan & 0xff;
+	input->formatted.vlan_id = vlan;
 
 	return 0;
 }
@@ -1386,14 +1348,9 @@ s32 ixgbe_atr_set_vlan_id_82599(struct ixgbe_atr_input *input, u16 vlan)
  *  @input: input stream to modify
  *  @src_addr: the IP address to load
  **/
-s32 ixgbe_atr_set_src_ipv4_82599(struct ixgbe_atr_input *input, u32 src_addr)
+s32 ixgbe_atr_set_src_ipv4_82599(union ixgbe_atr_input *input, __be32 src_addr)
 {
-	input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 3] = src_addr >> 24;
-	input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 2] =
-	                                               (src_addr >> 16) & 0xff;
-	input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 1] =
-	                                                (src_addr >> 8) & 0xff;
-	input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET] = src_addr & 0xff;
+	input->formatted.src_ip[0] = src_addr;
 
 	return 0;
 }
@@ -1403,14 +1360,9 @@ s32 ixgbe_atr_set_src_ipv4_82599(struct ixgbe_atr_input *input, u32 src_addr)
  *  @input: input stream to modify
  *  @dst_addr: the IP address to load
  **/
-s32 ixgbe_atr_set_dst_ipv4_82599(struct ixgbe_atr_input *input, u32 dst_addr)
+s32 ixgbe_atr_set_dst_ipv4_82599(union ixgbe_atr_input *input, __be32 dst_addr)
 {
-	input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 3] = dst_addr >> 24;
-	input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 2] =
-	                                               (dst_addr >> 16) & 0xff;
-	input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 1] =
-	                                                (dst_addr >> 8) & 0xff;
-	input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET] = dst_addr & 0xff;
+	input->formatted.dst_ip[0] = dst_addr;
 
 	return 0;
 }
@@ -1420,10 +1372,9 @@ s32 ixgbe_atr_set_dst_ipv4_82599(struct ixgbe_atr_input *input, u32 dst_addr)
  *  @input: input stream to modify
  *  @src_port: the source port to load
  **/
-s32 ixgbe_atr_set_src_port_82599(struct ixgbe_atr_input *input, u16 src_port)
+s32 ixgbe_atr_set_src_port_82599(union ixgbe_atr_input *input, __be16 src_port)
 {
-	input->byte_stream[IXGBE_ATR_SRC_PORT_OFFSET + 1] = src_port >> 8;
-	input->byte_stream[IXGBE_ATR_SRC_PORT_OFFSET] = src_port & 0xff;
+	input->formatted.src_port = src_port;
 
 	return 0;
 }
@@ -1433,10 +1384,9 @@ s32 ixgbe_atr_set_src_port_82599(struct ixgbe_atr_input *input, u16 src_port)
  *  @input: input stream to modify
  *  @dst_port: the destination port to load
  **/
-s32 ixgbe_atr_set_dst_port_82599(struct ixgbe_atr_input *input, u16 dst_port)
+s32 ixgbe_atr_set_dst_port_82599(union ixgbe_atr_input *input, __be16 dst_port)
 {
-	input->byte_stream[IXGBE_ATR_DST_PORT_OFFSET + 1] = dst_port >> 8;
-	input->byte_stream[IXGBE_ATR_DST_PORT_OFFSET] = dst_port & 0xff;
+	input->formatted.dst_port = dst_port;
 
 	return 0;
 }
@@ -1446,10 +1396,10 @@ s32 ixgbe_atr_set_dst_port_82599(struct ixgbe_atr_input *input, u16 dst_port)
  *  @input: input stream to modify
  *  @flex_bytes: the flexible bytes to load
  **/
-s32 ixgbe_atr_set_flex_byte_82599(struct ixgbe_atr_input *input, u16 flex_byte)
+s32 ixgbe_atr_set_flex_byte_82599(union ixgbe_atr_input *input,
+				  __be16 flex_bytes)
 {
-	input->byte_stream[IXGBE_ATR_FLEX_BYTE_OFFSET + 1] = flex_byte >> 8;
-	input->byte_stream[IXGBE_ATR_FLEX_BYTE_OFFSET] = flex_byte & 0xff;
+	input->formatted.flex_bytes = flex_bytes;
 
 	return 0;
 }
@@ -1459,9 +1409,9 @@ s32 ixgbe_atr_set_flex_byte_82599(struct ixgbe_atr_input *input, u16 flex_byte)
  *  @input: input stream to modify
  *  @l4type: the layer 4 type value to load
  **/
-s32 ixgbe_atr_set_l4type_82599(struct ixgbe_atr_input *input, u8 l4type)
+s32 ixgbe_atr_set_l4type_82599(union ixgbe_atr_input *input, u8 l4type)
 {
-	input->byte_stream[IXGBE_ATR_L4TYPE_OFFSET] = l4type;
+	input->formatted.flow_type = l4type;
 
 	return 0;
 }
@@ -1471,10 +1421,9 @@ s32 ixgbe_atr_set_l4type_82599(struct ixgbe_atr_input *input, u8 l4type)
  *  @input: input stream to search
  *  @vlan: the VLAN id to load
  **/
-static s32 ixgbe_atr_get_vlan_id_82599(struct ixgbe_atr_input *input, u16 *vlan)
+static s32 ixgbe_atr_get_vlan_id_82599(union ixgbe_atr_input *input, __be16 *vlan)
 {
-	*vlan = input->byte_stream[IXGBE_ATR_VLAN_OFFSET];
-	*vlan |= input->byte_stream[IXGBE_ATR_VLAN_OFFSET + 1] << 8;
+	*vlan = input->formatted.vlan_id;
 
 	return 0;
 }
@@ -1484,13 +1433,10 @@ static s32 ixgbe_atr_get_vlan_id_82599(struct ixgbe_atr_input *input, u16 *vlan)
  *  @input: input stream to search
  *  @src_addr: the IP address to load
  **/
-static s32 ixgbe_atr_get_src_ipv4_82599(struct ixgbe_atr_input *input,
-                                        u32 *src_addr)
+static s32 ixgbe_atr_get_src_ipv4_82599(union ixgbe_atr_input *input,
+                                        __be32 *src_addr)
 {
-	*src_addr = input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET];
-	*src_addr |= input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 1] << 8;
-	*src_addr |= input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 2] << 16;
-	*src_addr |= input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 3] << 24;
+	*src_addr = input->formatted.src_ip[0];
 
 	return 0;
 }
@@ -1500,13 +1446,10 @@ static s32 ixgbe_atr_get_src_ipv4_82599(struct ixgbe_atr_input *input,
  *  @input: input stream to search
  *  @dst_addr: the IP address to load
  **/
-static s32 ixgbe_atr_get_dst_ipv4_82599(struct ixgbe_atr_input *input,
-                                        u32 *dst_addr)
+static s32 ixgbe_atr_get_dst_ipv4_82599(union ixgbe_atr_input *input,
+                                        __be32 *dst_addr)
 {
-	*dst_addr = input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET];
-	*dst_addr |= input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 1] << 8;
-	*dst_addr |= input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 2] << 16;
-	*dst_addr |= input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 3] << 24;
+	*dst_addr = input->formatted.dst_ip[0];
 
 	return 0;
 }
@@ -1519,29 +1462,14 @@ static s32 ixgbe_atr_get_dst_ipv4_82599(struct ixgbe_atr_input *input,
  *  @src_addr_3: the third 4 bytes of the IP address to load
  *  @src_addr_4: the fourth 4 bytes of the IP address to load
  **/
-static s32 ixgbe_atr_get_src_ipv6_82599(struct ixgbe_atr_input *input,
-                                        u32 *src_addr_1, u32 *src_addr_2,
-                                        u32 *src_addr_3, u32 *src_addr_4)
+static s32 ixgbe_atr_get_src_ipv6_82599(union ixgbe_atr_input *input,
+                                        __be32 *src_addr_0, __be32 *src_addr_1,
+                                        __be32 *src_addr_2, __be32 *src_addr_3)
 {
-	*src_addr_1 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 12];
-	*src_addr_1 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 13] << 8;
-	*src_addr_1 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 14] << 16;
-	*src_addr_1 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 15] << 24;
-
-	*src_addr_2 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 8];
-	*src_addr_2 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 9] << 8;
-	*src_addr_2 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 10] << 16;
-	*src_addr_2 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 11] << 24;
-
-	*src_addr_3 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 4];
-	*src_addr_3 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 5] << 8;
-	*src_addr_3 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 6] << 16;
-	*src_addr_3 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 7] << 24;
-
-	*src_addr_4 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET];
-	*src_addr_4 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 1] << 8;
-	*src_addr_4 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 2] << 16;
-	*src_addr_4 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 3] << 24;
+	*src_addr_0 = input->formatted.src_ip[0];
+	*src_addr_1 = input->formatted.src_ip[1];
+	*src_addr_2 = input->formatted.src_ip[2];
+	*src_addr_3 = input->formatted.src_ip[3];
 
 	return 0;
 }
@@ -1556,11 +1484,10 @@ static s32 ixgbe_atr_get_src_ipv6_82599(struct ixgbe_atr_input *input,
  *  endianness when retrieving the data.  This can be confusing since the
  *  internal hash engine expects it to be big-endian.
  **/
-static s32 ixgbe_atr_get_src_port_82599(struct ixgbe_atr_input *input,
-                                        u16 *src_port)
+static s32 ixgbe_atr_get_src_port_82599(union ixgbe_atr_input *input,
+                                        __be16 *src_port)
 {
-	*src_port = input->byte_stream[IXGBE_ATR_SRC_PORT_OFFSET] << 8;
-	*src_port |= input->byte_stream[IXGBE_ATR_SRC_PORT_OFFSET + 1];
+	*src_port = input->formatted.src_port;
 
 	return 0;
 }
@@ -1575,11 +1502,10 @@ static s32 ixgbe_atr_get_src_port_82599(struct ixgbe_atr_input *input,
  *  endianness when retrieving the data.  This can be confusing since the
  *  internal hash engine expects it to be big-endian.
  **/
-static s32 ixgbe_atr_get_dst_port_82599(struct ixgbe_atr_input *input,
-                                        u16 *dst_port)
+static s32 ixgbe_atr_get_dst_port_82599(union ixgbe_atr_input *input,
+                                        __be16 *dst_port)
 {
-	*dst_port = input->byte_stream[IXGBE_ATR_DST_PORT_OFFSET] << 8;
-	*dst_port |= input->byte_stream[IXGBE_ATR_DST_PORT_OFFSET + 1];
+	*dst_port = input->formatted.dst_port;
 
 	return 0;
 }
@@ -1589,11 +1515,10 @@ static s32 ixgbe_atr_get_dst_port_82599(struct ixgbe_atr_input *input,
  *  @input: input stream to modify
  *  @flex_bytes: the flexible bytes to load
  **/
-static s32 ixgbe_atr_get_flex_byte_82599(struct ixgbe_atr_input *input,
-                                         u16 *flex_byte)
+static s32 ixgbe_atr_get_flex_byte_82599(union ixgbe_atr_input *input,
+                                         __be16 *flex_bytes)
 {
-	*flex_byte = input->byte_stream[IXGBE_ATR_FLEX_BYTE_OFFSET];
-	*flex_byte |= input->byte_stream[IXGBE_ATR_FLEX_BYTE_OFFSET + 1] << 8;
+	*flex_bytes = input->formatted.flex_bytes;
 
 	return 0;
 }
@@ -1603,10 +1528,10 @@ static s32 ixgbe_atr_get_flex_byte_82599(struct ixgbe_atr_input *input,
  *  @input: input stream to modify
  *  @l4type: the layer 4 type value to load
  **/
-static s32 ixgbe_atr_get_l4type_82599(struct ixgbe_atr_input *input,
+static s32 ixgbe_atr_get_l4type_82599(union ixgbe_atr_input *input,
                                       u8 *l4type)
 {
-	*l4type = input->byte_stream[IXGBE_ATR_L4TYPE_OFFSET];
+	*l4type = input->formatted.flow_type;
 
 	return 0;
 }
@@ -1618,57 +1543,49 @@ static s32 ixgbe_atr_get_l4type_82599(struct ixgbe_atr_input *input,
  *  @queue: queue index to direct traffic to
  **/
 s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw,
-                                          struct ixgbe_atr_input *input,
+                                          union ixgbe_atr_input *input,
                                           u8 queue)
 {
 	u64  fdirhashcmd;
-	u64  fdircmd;
-	u32  fdirhash;
-	u16  bucket_hash, sig_hash;
-	u8   l4type;
-
-	bucket_hash = ixgbe_atr_compute_hash_82599(input,
-	                                           IXGBE_ATR_BUCKET_HASH_KEY);
-
-	/* bucket_hash is only 15 bits */
-	bucket_hash &= IXGBE_ATR_HASH_MASK;
-
-	sig_hash = ixgbe_atr_compute_hash_82599(input,
-	                                        IXGBE_ATR_SIGNATURE_HASH_KEY);
-
-	/* Get the l4type in order to program FDIRCMD properly */
-	/* lowest 2 bits are FDIRCMD.L4TYPE, third lowest bit is FDIRCMD.IPV6 */
-	ixgbe_atr_get_l4type_82599(input, &l4type);
+	u32  fdircmd;
+	u32  bucket_hash, sig_hash;
 
 	/*
-	 * The lower 32-bits of fdirhashcmd is for FDIRHASH, the upper 32-bits
-	 * is for FDIRCMD.  Then do a 64-bit register write from FDIRHASH.
+	 * Get the flow_type in order to program FDIRCMD properly
+	 * lowest 2 bits are FDIRCMD.L4TYPE, third lowest bit is FDIRCMD.IPV6
 	 */
-	fdirhash = sig_hash << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT | bucket_hash;
-
-	fdircmd = (IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE |
-	           IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN);
-
-	switch (l4type & IXGBE_ATR_L4TYPE_MASK) {
-	case IXGBE_ATR_L4TYPE_TCP:
-		fdircmd |= IXGBE_FDIRCMD_L4TYPE_TCP;
-		break;
-	case IXGBE_ATR_L4TYPE_UDP:
-		fdircmd |= IXGBE_FDIRCMD_L4TYPE_UDP;
-		break;
-	case IXGBE_ATR_L4TYPE_SCTP:
-		fdircmd |= IXGBE_FDIRCMD_L4TYPE_SCTP;
+	switch (input->formatted.flow_type) {
+	case IXGBE_ATR_FLOW_TYPE_TCPV4:
+	case IXGBE_ATR_FLOW_TYPE_UDPV4:
+	case IXGBE_ATR_FLOW_TYPE_SCTPV4:
+	case IXGBE_ATR_FLOW_TYPE_TCPV6:
+	case IXGBE_ATR_FLOW_TYPE_UDPV6:
+	case IXGBE_ATR_FLOW_TYPE_SCTPV6:
 		break;
 	default:
-		hw_dbg(hw, "Error on l4type input\n");
+		hw_dbg(hw, " Error on flow type input\n");
 		return IXGBE_ERR_CONFIG;
 	}
 
-	if (l4type & IXGBE_ATR_L4TYPE_IPV6_MASK)
-		fdircmd |= IXGBE_FDIRCMD_IPV6;
+	/* configure FDIRCMD register */
+	fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE |
+	          IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN;
+	fdircmd |= input->formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT;
+	fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT;
 
-	fdircmd |= ((u64)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT);
-	fdirhashcmd = ((fdircmd << 32) | fdirhash);
+	/*
+	 * The lower 32-bits of fdirhashcmd is for FDIRHASH, the upper 32-bits
+	 * is for FDIRCMD.  Then do a 64-bit register write from FDIRHASH.
+	 */
+	fdirhashcmd = (u64)fdircmd << 32;
+
+	sig_hash = ixgbe_atr_compute_hash_82599(input,
+	                                        IXGBE_ATR_SIGNATURE_HASH_KEY);
+	fdirhashcmd |= sig_hash << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT;
+
+	bucket_hash = ixgbe_atr_compute_hash_82599(input,
+	                                           IXGBE_ATR_BUCKET_HASH_KEY);
+	fdirhashcmd |= bucket_hash;
 
 	IXGBE_WRITE_REG64(hw, IXGBE_FDIRHASH, fdirhashcmd);
 
@@ -1687,7 +1604,7 @@ s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw,
  *  hardware writes must be protected from one another.
  **/
 s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw,
-                                      struct ixgbe_atr_input *input,
+                                      union ixgbe_atr_input *input,
                                       struct ixgbe_atr_input_masks *input_masks,
                                       u16 soft_id, u8 queue)
 {
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index a8bab1564d07..76e40e2b37e5 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -2278,7 +2278,7 @@ static int ixgbe_set_rx_ntuple(struct net_device *dev,
 {
 	struct ixgbe_adapter *adapter = netdev_priv(dev);
 	struct ethtool_rx_ntuple_flow_spec fs = cmd->fs;
-	struct ixgbe_atr_input input_struct;
+	union ixgbe_atr_input input_struct;
 	struct ixgbe_atr_input_masks input_masks;
 	int target_queue;
 
@@ -2293,7 +2293,7 @@ static int ixgbe_set_rx_ntuple(struct net_device *dev,
 	    (fs.action < ETHTOOL_RXNTUPLE_ACTION_DROP))
 		return -EINVAL;
 
-	memset(&input_struct, 0, sizeof(struct ixgbe_atr_input));
+	memset(&input_struct, 0, sizeof(union ixgbe_atr_input));
 	memset(&input_masks, 0, sizeof(struct ixgbe_atr_input_masks));
 
 	input_masks.src_ip_mask = fs.m_u.tcp_ip4_spec.ip4src;
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index e8ae311bbbe5..26718abd5ce4 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -6509,21 +6509,20 @@ static void ixgbe_tx_queue(struct ixgbe_ring *tx_ring,
 static void ixgbe_atr(struct ixgbe_adapter *adapter, struct sk_buff *skb,
 		      u8 queue, u32 tx_flags, __be16 protocol)
 {
-	struct ixgbe_atr_input atr_input;
+	union ixgbe_atr_input atr_input;
 	struct iphdr *iph = ip_hdr(skb);
 	struct ethhdr *eth = (struct ethhdr *)skb->data;
 	struct tcphdr *th;
-	u16 vlan_id;
+	__be16 vlan_id;
 
 	/* Right now, we support IPv4 w/ TCP only */
 	if (protocol != htons(ETH_P_IP) ||
 	    iph->protocol != IPPROTO_TCP)
 		return;
 
-	memset(&atr_input, 0, sizeof(struct ixgbe_atr_input));
+	memset(&atr_input, 0, sizeof(union ixgbe_atr_input));
 
-	vlan_id = (tx_flags & IXGBE_TX_FLAGS_VLAN_MASK) >>
-		   IXGBE_TX_FLAGS_VLAN_SHIFT;
+	vlan_id = htons(tx_flags >> IXGBE_TX_FLAGS_VLAN_SHIFT);
 
 	th = tcp_hdr(skb);
 
@@ -6531,7 +6530,7 @@ static void ixgbe_atr(struct ixgbe_adapter *adapter, struct sk_buff *skb,
 	ixgbe_atr_set_src_port_82599(&atr_input, th->dest);
 	ixgbe_atr_set_dst_port_82599(&atr_input, th->source);
 	ixgbe_atr_set_flex_byte_82599(&atr_input, eth->h_proto);
-	ixgbe_atr_set_l4type_82599(&atr_input, IXGBE_ATR_L4TYPE_TCP);
+	ixgbe_atr_set_l4type_82599(&atr_input, IXGBE_ATR_FLOW_TYPE_TCPV4);
 	/* src and dst are inverted, think how the receiver sees them */
 	ixgbe_atr_set_src_ipv4_82599(&atr_input, iph->daddr);
 	ixgbe_atr_set_dst_ipv4_82599(&atr_input, iph->saddr);
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index 446f3467d3c7..c56a7128e452 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -1990,6 +1990,7 @@ enum ixgbe_fdir_pballoc_type {
 #define IXGBE_FDIRCMD_LAST                      0x00000800
 #define IXGBE_FDIRCMD_COLLISION                 0x00001000
 #define IXGBE_FDIRCMD_QUEUE_EN                  0x00008000
+#define IXGBE_FDIRCMD_FLOW_TYPE_SHIFT           5
 #define IXGBE_FDIRCMD_RX_QUEUE_SHIFT            16
 #define IXGBE_FDIRCMD_VT_POOL_SHIFT             24
 #define IXGBE_FDIR_INIT_DONE_POLL               10
@@ -2147,51 +2148,63 @@ typedef u32 ixgbe_physical_layer;
 #define FC_LOW_WATER(MTU)  (2 * (2 * PAUSE_MTU(MTU) + PAUSE_RTT))
 
 /* Software ATR hash keys */
-#define IXGBE_ATR_BUCKET_HASH_KEY    0xE214AD3D
-#define IXGBE_ATR_SIGNATURE_HASH_KEY 0x14364D17
-
-/* Software ATR input stream offsets and masks */
-#define IXGBE_ATR_VLAN_OFFSET       0
-#define IXGBE_ATR_SRC_IPV6_OFFSET   2
-#define IXGBE_ATR_SRC_IPV4_OFFSET  14
-#define IXGBE_ATR_DST_IPV6_OFFSET  18
-#define IXGBE_ATR_DST_IPV4_OFFSET  30
-#define IXGBE_ATR_SRC_PORT_OFFSET  34
-#define IXGBE_ATR_DST_PORT_OFFSET  36
-#define IXGBE_ATR_FLEX_BYTE_OFFSET 38
-#define IXGBE_ATR_VM_POOL_OFFSET   40
-#define IXGBE_ATR_L4TYPE_OFFSET    41
+#define IXGBE_ATR_BUCKET_HASH_KEY    0x3DAD14E2
+#define IXGBE_ATR_SIGNATURE_HASH_KEY 0x174D3614
 
+/* Software ATR input stream values and masks */
+#define IXGBE_ATR_HASH_MASK     0x7fff
 #define IXGBE_ATR_L4TYPE_MASK      0x3
-#define IXGBE_ATR_L4TYPE_IPV6_MASK 0x4
 #define IXGBE_ATR_L4TYPE_UDP       0x1
 #define IXGBE_ATR_L4TYPE_TCP       0x2
 #define IXGBE_ATR_L4TYPE_SCTP      0x3
-#define IXGBE_ATR_HASH_MASK     0x7fff
+#define IXGBE_ATR_L4TYPE_IPV6_MASK 0x4
+enum ixgbe_atr_flow_type {
+	IXGBE_ATR_FLOW_TYPE_IPV4   = 0x0,
+	IXGBE_ATR_FLOW_TYPE_UDPV4  = 0x1,
+	IXGBE_ATR_FLOW_TYPE_TCPV4  = 0x2,
+	IXGBE_ATR_FLOW_TYPE_SCTPV4 = 0x3,
+	IXGBE_ATR_FLOW_TYPE_IPV6   = 0x4,
+	IXGBE_ATR_FLOW_TYPE_UDPV6  = 0x5,
+	IXGBE_ATR_FLOW_TYPE_TCPV6  = 0x6,
+	IXGBE_ATR_FLOW_TYPE_SCTPV6 = 0x7,
+};
 
 /* Flow Director ATR input struct. */
-struct ixgbe_atr_input {
-	/* Byte layout in order, all values with MSB first:
+union ixgbe_atr_input {
+	/*
+	 * Byte layout in order, all values with MSB first:
 	 *
+	 * vm_pool    - 1 byte
+	 * flow_type  - 1 byte
 	 * vlan_id    - 2 bytes
 	 * src_ip     - 16 bytes
 	 * dst_ip     - 16 bytes
 	 * src_port   - 2 bytes
 	 * dst_port   - 2 bytes
 	 * flex_bytes - 2 bytes
-	 * vm_pool    - 1 byte
-	 * l4type     - 1 byte
+	 * rsvd0      - 2 bytes - space reserved must be 0.
 	 */
-	u8 byte_stream[42];
+	struct {
+		u8     vm_pool;
+		u8     flow_type;
+		__be16 vlan_id;
+		__be32 dst_ip[4];
+		__be32 src_ip[4];
+		__be16 src_port;
+		__be16 dst_port;
+		__be16 flex_bytes;
+		__be16 rsvd0;
+	} formatted;
+	__be32 dword_stream[11];
 };
 
 struct ixgbe_atr_input_masks {
-	u32 src_ip_mask;
-	u32 dst_ip_mask;
-	u16 src_port_mask;
-	u16 dst_port_mask;
-	u16 vlan_id_mask;
-	u16 data_mask;
+	__be32 src_ip_mask;
+	__be32 dst_ip_mask;
+	__be16 src_port_mask;
+	__be16 dst_port_mask;
+	__be16 vlan_id_mask;
+	__be16 data_mask;
 };
 
 enum ixgbe_eeprom_type {
-- 
cgit v1.2.3


From 69830529b26e6dc9582a4b65ab88f40f050cf94e Mon Sep 17 00:00:00 2001
From: Alexander Duyck <alexander.h.duyck@intel.com>
Date: Thu, 6 Jan 2011 14:29:58 +0000
Subject: ixgbe: further flow director performance optimizations

This change adds a compressed input type for atr signature hash
computation.  It also drops the use of the set functions when setting up
the ATR input since we can then directly setup the hash input as two dwords
that can be stored and passed as registers.

With these changes the cost of computing the has is low enough that we can
perform a hash computation on each TCP SYN flagged packet allowing us to
drop the number of flow director misses considerably in tests such as
netperf TCP_CRR.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbe/ixgbe.h       |   3 +-
 drivers/net/ixgbe/ixgbe_82599.c | 112 +++++++++++++++++++++++++++++++++++-----
 drivers/net/ixgbe/ixgbe_main.c  | 107 +++++++++++++++++++++++++++-----------
 drivers/net/ixgbe/ixgbe_type.h  |  16 ++++++
 4 files changed, 194 insertions(+), 44 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h
index 2666e69d328c..341b3db2e7db 100644
--- a/drivers/net/ixgbe/ixgbe.h
+++ b/drivers/net/ixgbe/ixgbe.h
@@ -526,7 +526,8 @@ extern s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw);
 extern s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 pballoc);
 extern s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 pballoc);
 extern s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw,
-                                                 union ixgbe_atr_input *input,
+						 union ixgbe_atr_hash_dword input,
+						 union ixgbe_atr_hash_dword common,
                                                  u8 queue);
 extern s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw,
                                       union ixgbe_atr_input *input,
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index 40aa3c29dc1d..d41931f5c3d3 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -1331,6 +1331,96 @@ static u32 ixgbe_atr_compute_hash_82599(union ixgbe_atr_input *atr_input,
 	return hash_result & IXGBE_ATR_HASH_MASK;
 }
 
+/*
+ * These defines allow us to quickly generate all of the necessary instructions
+ * in the function below by simply calling out IXGBE_COMPUTE_SIG_HASH_ITERATION
+ * for values 0 through 15
+ */
+#define IXGBE_ATR_COMMON_HASH_KEY \
+		(IXGBE_ATR_BUCKET_HASH_KEY & IXGBE_ATR_SIGNATURE_HASH_KEY)
+#define IXGBE_COMPUTE_SIG_HASH_ITERATION(_n) \
+do { \
+	u32 n = (_n); \
+	if (IXGBE_ATR_COMMON_HASH_KEY & (0x01 << n)) \
+		common_hash ^= lo_hash_dword >> n; \
+	else if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << n)) \
+		bucket_hash ^= lo_hash_dword >> n; \
+	else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << n)) \
+		sig_hash ^= lo_hash_dword << (16 - n); \
+	if (IXGBE_ATR_COMMON_HASH_KEY & (0x01 << (n + 16))) \
+		common_hash ^= hi_hash_dword >> n; \
+	else if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << (n + 16))) \
+		bucket_hash ^= hi_hash_dword >> n; \
+	else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << (n + 16))) \
+		sig_hash ^= hi_hash_dword << (16 - n); \
+} while (0);
+
+/**
+ *  ixgbe_atr_compute_sig_hash_82599 - Compute the signature hash
+ *  @stream: input bitstream to compute the hash on
+ *
+ *  This function is almost identical to the function above but contains
+ *  several optomizations such as unwinding all of the loops, letting the
+ *  compiler work out all of the conditional ifs since the keys are static
+ *  defines, and computing two keys at once since the hashed dword stream
+ *  will be the same for both keys.
+ **/
+static u32 ixgbe_atr_compute_sig_hash_82599(union ixgbe_atr_hash_dword input,
+					    union ixgbe_atr_hash_dword common)
+{
+	u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan;
+	u32 sig_hash = 0, bucket_hash = 0, common_hash = 0;
+
+	/* record the flow_vm_vlan bits as they are a key part to the hash */
+	flow_vm_vlan = ntohl(input.dword);
+
+	/* generate common hash dword */
+	hi_hash_dword = ntohl(common.dword);
+
+	/* low dword is word swapped version of common */
+	lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16);
+
+	/* apply flow ID/VM pool/VLAN ID bits to hash words */
+	hi_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan >> 16);
+
+	/* Process bits 0 and 16 */
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(0);
+
+	/*
+	 * apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to
+	 * delay this because bit 0 of the stream should not be processed
+	 * so we do not add the vlan until after bit 0 was processed
+	 */
+	lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16);
+
+	/* Process remaining 30 bit of the key */
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(1);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(2);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(3);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(4);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(5);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(6);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(7);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(8);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(9);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(10);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(11);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(12);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(13);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(14);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(15);
+
+	/* combine common_hash result with signature and bucket hashes */
+	bucket_hash ^= common_hash;
+	bucket_hash &= IXGBE_ATR_HASH_MASK;
+
+	sig_hash ^= common_hash << 16;
+	sig_hash &= IXGBE_ATR_HASH_MASK << 16;
+
+	/* return completed signature hash */
+	return sig_hash ^ bucket_hash;
+}
+
 /**
  *  ixgbe_atr_set_vlan_id_82599 - Sets the VLAN id in the ATR input stream
  *  @input: input stream to modify
@@ -1539,22 +1629,23 @@ static s32 ixgbe_atr_get_l4type_82599(union ixgbe_atr_input *input,
 /**
  *  ixgbe_atr_add_signature_filter_82599 - Adds a signature hash filter
  *  @hw: pointer to hardware structure
- *  @stream: input bitstream
+ *  @input: unique input dword
+ *  @common: compressed common input dword
  *  @queue: queue index to direct traffic to
  **/
 s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw,
-                                          union ixgbe_atr_input *input,
+                                          union ixgbe_atr_hash_dword input,
+                                          union ixgbe_atr_hash_dword common,
                                           u8 queue)
 {
 	u64  fdirhashcmd;
 	u32  fdircmd;
-	u32  bucket_hash, sig_hash;
 
 	/*
 	 * Get the flow_type in order to program FDIRCMD properly
 	 * lowest 2 bits are FDIRCMD.L4TYPE, third lowest bit is FDIRCMD.IPV6
 	 */
-	switch (input->formatted.flow_type) {
+	switch (input.formatted.flow_type) {
 	case IXGBE_ATR_FLOW_TYPE_TCPV4:
 	case IXGBE_ATR_FLOW_TYPE_UDPV4:
 	case IXGBE_ATR_FLOW_TYPE_SCTPV4:
@@ -1570,7 +1661,7 @@ s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw,
 	/* configure FDIRCMD register */
 	fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE |
 	          IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN;
-	fdircmd |= input->formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT;
+	fdircmd |= input.formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT;
 	fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT;
 
 	/*
@@ -1578,17 +1669,12 @@ s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw,
 	 * is for FDIRCMD.  Then do a 64-bit register write from FDIRHASH.
 	 */
 	fdirhashcmd = (u64)fdircmd << 32;
-
-	sig_hash = ixgbe_atr_compute_hash_82599(input,
-	                                        IXGBE_ATR_SIGNATURE_HASH_KEY);
-	fdirhashcmd |= sig_hash << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT;
-
-	bucket_hash = ixgbe_atr_compute_hash_82599(input,
-	                                           IXGBE_ATR_BUCKET_HASH_KEY);
-	fdirhashcmd |= bucket_hash;
+	fdirhashcmd |= ixgbe_atr_compute_sig_hash_82599(input, common);
 
 	IXGBE_WRITE_REG64(hw, IXGBE_FDIRHASH, fdirhashcmd);
 
+	hw_dbg(hw, "Tx Queue=%x hash=%x\n", queue, (u32)fdirhashcmd);
+
 	return 0;
 }
 
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 26718abd5ce4..490818c46d74 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -6506,37 +6506,92 @@ static void ixgbe_tx_queue(struct ixgbe_ring *tx_ring,
 	writel(i, tx_ring->tail);
 }
 
-static void ixgbe_atr(struct ixgbe_adapter *adapter, struct sk_buff *skb,
-		      u8 queue, u32 tx_flags, __be16 protocol)
-{
-	union ixgbe_atr_input atr_input;
-	struct iphdr *iph = ip_hdr(skb);
-	struct ethhdr *eth = (struct ethhdr *)skb->data;
+static void ixgbe_atr(struct ixgbe_ring *ring, struct sk_buff *skb,
+		      u32 tx_flags, __be16 protocol)
+{
+	struct ixgbe_q_vector *q_vector = ring->q_vector;
+	union ixgbe_atr_hash_dword input = { .dword = 0 };
+	union ixgbe_atr_hash_dword common = { .dword = 0 };
+	union {
+		unsigned char *network;
+		struct iphdr *ipv4;
+		struct ipv6hdr *ipv6;
+	} hdr;
 	struct tcphdr *th;
 	__be16 vlan_id;
 
-	/* Right now, we support IPv4 w/ TCP only */
-	if (protocol != htons(ETH_P_IP) ||
-	    iph->protocol != IPPROTO_TCP)
+	/* if ring doesn't have a interrupt vector, cannot perform ATR */
+	if (!q_vector)
+		return;
+
+	/* do nothing if sampling is disabled */
+	if (!ring->atr_sample_rate)
 		return;
 
-	memset(&atr_input, 0, sizeof(union ixgbe_atr_input));
+	ring->atr_count++;
 
-	vlan_id = htons(tx_flags >> IXGBE_TX_FLAGS_VLAN_SHIFT);
+	/* snag network header to get L4 type and address */
+	hdr.network = skb_network_header(skb);
+
+	/* Currently only IPv4/IPv6 with TCP is supported */
+	if ((protocol != __constant_htons(ETH_P_IPV6) ||
+	     hdr.ipv6->nexthdr != IPPROTO_TCP) &&
+	    (protocol != __constant_htons(ETH_P_IP) ||
+	     hdr.ipv4->protocol != IPPROTO_TCP))
+		return;
 
 	th = tcp_hdr(skb);
 
-	ixgbe_atr_set_vlan_id_82599(&atr_input, vlan_id);
-	ixgbe_atr_set_src_port_82599(&atr_input, th->dest);
-	ixgbe_atr_set_dst_port_82599(&atr_input, th->source);
-	ixgbe_atr_set_flex_byte_82599(&atr_input, eth->h_proto);
-	ixgbe_atr_set_l4type_82599(&atr_input, IXGBE_ATR_FLOW_TYPE_TCPV4);
-	/* src and dst are inverted, think how the receiver sees them */
-	ixgbe_atr_set_src_ipv4_82599(&atr_input, iph->daddr);
-	ixgbe_atr_set_dst_ipv4_82599(&atr_input, iph->saddr);
+	/* skip this packet since the socket is closing */
+	if (th->fin)
+		return;
+
+	/* sample on all syn packets or once every atr sample count */
+	if (!th->syn && (ring->atr_count < ring->atr_sample_rate))
+		return;
+
+	/* reset sample count */
+	ring->atr_count = 0;
+
+	vlan_id = htons(tx_flags >> IXGBE_TX_FLAGS_VLAN_SHIFT);
+
+	/*
+	 * src and dst are inverted, think how the receiver sees them
+	 *
+	 * The input is broken into two sections, a non-compressed section
+	 * containing vm_pool, vlan_id, and flow_type.  The rest of the data
+	 * is XORed together and stored in the compressed dword.
+	 */
+	input.formatted.vlan_id = vlan_id;
+
+	/*
+	 * since src port and flex bytes occupy the same word XOR them together
+	 * and write the value to source port portion of compressed dword
+	 */
+	if (vlan_id)
+		common.port.src ^= th->dest ^ __constant_htons(ETH_P_8021Q);
+	else
+		common.port.src ^= th->dest ^ protocol;
+	common.port.dst ^= th->source;
+
+	if (protocol == __constant_htons(ETH_P_IP)) {
+		input.formatted.flow_type = IXGBE_ATR_FLOW_TYPE_TCPV4;
+		common.ip ^= hdr.ipv4->saddr ^ hdr.ipv4->daddr;
+	} else {
+		input.formatted.flow_type = IXGBE_ATR_FLOW_TYPE_TCPV6;
+		common.ip ^= hdr.ipv6->saddr.s6_addr32[0] ^
+			     hdr.ipv6->saddr.s6_addr32[1] ^
+			     hdr.ipv6->saddr.s6_addr32[2] ^
+			     hdr.ipv6->saddr.s6_addr32[3] ^
+			     hdr.ipv6->daddr.s6_addr32[0] ^
+			     hdr.ipv6->daddr.s6_addr32[1] ^
+			     hdr.ipv6->daddr.s6_addr32[2] ^
+			     hdr.ipv6->daddr.s6_addr32[3];
+	}
 
 	/* This assumes the Rx queue and Tx queue are bound to the same CPU */
-	ixgbe_fdir_add_signature_filter_82599(&adapter->hw, &atr_input, queue);
+	ixgbe_fdir_add_signature_filter_82599(&q_vector->adapter->hw,
+					      input, common, ring->queue_index);
 }
 
 static int __ixgbe_maybe_stop_tx(struct ixgbe_ring *tx_ring, int size)
@@ -6707,16 +6762,8 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb,
 	count = ixgbe_tx_map(adapter, tx_ring, skb, tx_flags, first, hdr_len);
 	if (count) {
 		/* add the ATR filter if ATR is on */
-		if (tx_ring->atr_sample_rate) {
-			++tx_ring->atr_count;
-			if ((tx_ring->atr_count >= tx_ring->atr_sample_rate) &&
-			     test_bit(__IXGBE_TX_FDIR_INIT_DONE,
-				      &tx_ring->state)) {
-				ixgbe_atr(adapter, skb, tx_ring->queue_index,
-					  tx_flags, protocol);
-				tx_ring->atr_count = 0;
-			}
-		}
+		if (test_bit(__IXGBE_TX_FDIR_INIT_DONE, &tx_ring->state))
+			ixgbe_atr(tx_ring, skb, tx_flags, protocol);
 		txq = netdev_get_tx_queue(netdev, tx_ring->queue_index);
 		txq->tx_bytes += skb->len;
 		txq->tx_packets++;
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index c56a7128e452..0d9392d92a0f 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -2198,6 +2198,22 @@ union ixgbe_atr_input {
 	__be32 dword_stream[11];
 };
 
+/* Flow Director compressed ATR hash input struct */
+union ixgbe_atr_hash_dword {
+	struct {
+		u8 vm_pool;
+		u8 flow_type;
+		__be16 vlan_id;
+	} formatted;
+	__be32 ip;
+	struct {
+		__be16 src;
+		__be16 dst;
+	} port;
+	__be16 flex_bytes;
+	__be32 dword;
+};
+
 struct ixgbe_atr_input_masks {
 	__be32 src_ip_mask;
 	__be32 dst_ip_mask;
-- 
cgit v1.2.3


From 45b9f509b7f5d2d792b3c03b78ddc8ec543e921b Mon Sep 17 00:00:00 2001
From: Alexander Duyck <alexander.h.duyck@intel.com>
Date: Thu, 6 Jan 2011 14:29:59 +0000
Subject: ixgbe: update ntuple filter configuration

This change fixes several issues found in ntuple filtering while I was
doing the ATR refactor.

Specifically I updated the masks to work correctly with the latest version
of ethtool, I cleaned up the exception handling and added detailed error
output when a filter is rejected, and corrected several bits that were set
incorrectly in ixgbe_type.h.

The previous version of this patch included a printk that was left over from
me fixing the filter setup.  This patch does not include that printk.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ixgbe/ixgbe.h         |  14 --
 drivers/net/ixgbe/ixgbe_82599.c   | 436 ++++++++++++--------------------------
 drivers/net/ixgbe/ixgbe_ethtool.c | 134 ++++++++----
 drivers/net/ixgbe/ixgbe_main.c    |  21 +-
 drivers/net/ixgbe/ixgbe_type.h    |  16 +-
 5 files changed, 250 insertions(+), 371 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h
index 341b3db2e7db..3b8c92463617 100644
--- a/drivers/net/ixgbe/ixgbe.h
+++ b/drivers/net/ixgbe/ixgbe.h
@@ -533,20 +533,6 @@ extern s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw,
                                       union ixgbe_atr_input *input,
                                       struct ixgbe_atr_input_masks *input_masks,
                                       u16 soft_id, u8 queue);
-extern s32 ixgbe_atr_set_vlan_id_82599(union ixgbe_atr_input *input,
-                                       u16 vlan_id);
-extern s32 ixgbe_atr_set_src_ipv4_82599(union ixgbe_atr_input *input,
-                                        u32 src_addr);
-extern s32 ixgbe_atr_set_dst_ipv4_82599(union ixgbe_atr_input *input,
-                                        u32 dst_addr);
-extern s32 ixgbe_atr_set_src_port_82599(union ixgbe_atr_input *input,
-                                        u16 src_port);
-extern s32 ixgbe_atr_set_dst_port_82599(union ixgbe_atr_input *input,
-                                        u16 dst_port);
-extern s32 ixgbe_atr_set_flex_byte_82599(union ixgbe_atr_input *input,
-                                         u16 flex_byte);
-extern s32 ixgbe_atr_set_l4type_82599(union ixgbe_atr_input *input,
-                                      u8 l4type);
 extern void ixgbe_configure_rscctl(struct ixgbe_adapter *adapter,
                                    struct ixgbe_ring *ring);
 extern void ixgbe_clear_rscctl(struct ixgbe_adapter *adapter,
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index d41931f5c3d3..8d316d9cd29d 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -1421,211 +1421,6 @@ static u32 ixgbe_atr_compute_sig_hash_82599(union ixgbe_atr_hash_dword input,
 	return sig_hash ^ bucket_hash;
 }
 
-/**
- *  ixgbe_atr_set_vlan_id_82599 - Sets the VLAN id in the ATR input stream
- *  @input: input stream to modify
- *  @vlan: the VLAN id to load
- **/
-s32 ixgbe_atr_set_vlan_id_82599(union ixgbe_atr_input *input, __be16 vlan)
-{
-	input->formatted.vlan_id = vlan;
-
-	return 0;
-}
-
-/**
- *  ixgbe_atr_set_src_ipv4_82599 - Sets the source IPv4 address
- *  @input: input stream to modify
- *  @src_addr: the IP address to load
- **/
-s32 ixgbe_atr_set_src_ipv4_82599(union ixgbe_atr_input *input, __be32 src_addr)
-{
-	input->formatted.src_ip[0] = src_addr;
-
-	return 0;
-}
-
-/**
- *  ixgbe_atr_set_dst_ipv4_82599 - Sets the destination IPv4 address
- *  @input: input stream to modify
- *  @dst_addr: the IP address to load
- **/
-s32 ixgbe_atr_set_dst_ipv4_82599(union ixgbe_atr_input *input, __be32 dst_addr)
-{
-	input->formatted.dst_ip[0] = dst_addr;
-
-	return 0;
-}
-
-/**
- *  ixgbe_atr_set_src_port_82599 - Sets the source port
- *  @input: input stream to modify
- *  @src_port: the source port to load
- **/
-s32 ixgbe_atr_set_src_port_82599(union ixgbe_atr_input *input, __be16 src_port)
-{
-	input->formatted.src_port = src_port;
-
-	return 0;
-}
-
-/**
- *  ixgbe_atr_set_dst_port_82599 - Sets the destination port
- *  @input: input stream to modify
- *  @dst_port: the destination port to load
- **/
-s32 ixgbe_atr_set_dst_port_82599(union ixgbe_atr_input *input, __be16 dst_port)
-{
-	input->formatted.dst_port = dst_port;
-
-	return 0;
-}
-
-/**
- *  ixgbe_atr_set_flex_byte_82599 - Sets the flexible bytes
- *  @input: input stream to modify
- *  @flex_bytes: the flexible bytes to load
- **/
-s32 ixgbe_atr_set_flex_byte_82599(union ixgbe_atr_input *input,
-				  __be16 flex_bytes)
-{
-	input->formatted.flex_bytes = flex_bytes;
-
-	return 0;
-}
-
-/**
- *  ixgbe_atr_set_l4type_82599 - Sets the layer 4 packet type
- *  @input: input stream to modify
- *  @l4type: the layer 4 type value to load
- **/
-s32 ixgbe_atr_set_l4type_82599(union ixgbe_atr_input *input, u8 l4type)
-{
-	input->formatted.flow_type = l4type;
-
-	return 0;
-}
-
-/**
- *  ixgbe_atr_get_vlan_id_82599 - Gets the VLAN id from the ATR input stream
- *  @input: input stream to search
- *  @vlan: the VLAN id to load
- **/
-static s32 ixgbe_atr_get_vlan_id_82599(union ixgbe_atr_input *input, __be16 *vlan)
-{
-	*vlan = input->formatted.vlan_id;
-
-	return 0;
-}
-
-/**
- *  ixgbe_atr_get_src_ipv4_82599 - Gets the source IPv4 address
- *  @input: input stream to search
- *  @src_addr: the IP address to load
- **/
-static s32 ixgbe_atr_get_src_ipv4_82599(union ixgbe_atr_input *input,
-                                        __be32 *src_addr)
-{
-	*src_addr = input->formatted.src_ip[0];
-
-	return 0;
-}
-
-/**
- *  ixgbe_atr_get_dst_ipv4_82599 - Gets the destination IPv4 address
- *  @input: input stream to search
- *  @dst_addr: the IP address to load
- **/
-static s32 ixgbe_atr_get_dst_ipv4_82599(union ixgbe_atr_input *input,
-                                        __be32 *dst_addr)
-{
-	*dst_addr = input->formatted.dst_ip[0];
-
-	return 0;
-}
-
-/**
- *  ixgbe_atr_get_src_ipv6_82599 - Gets the source IPv6 address
- *  @input: input stream to search
- *  @src_addr_1: the first 4 bytes of the IP address to load
- *  @src_addr_2: the second 4 bytes of the IP address to load
- *  @src_addr_3: the third 4 bytes of the IP address to load
- *  @src_addr_4: the fourth 4 bytes of the IP address to load
- **/
-static s32 ixgbe_atr_get_src_ipv6_82599(union ixgbe_atr_input *input,
-                                        __be32 *src_addr_0, __be32 *src_addr_1,
-                                        __be32 *src_addr_2, __be32 *src_addr_3)
-{
-	*src_addr_0 = input->formatted.src_ip[0];
-	*src_addr_1 = input->formatted.src_ip[1];
-	*src_addr_2 = input->formatted.src_ip[2];
-	*src_addr_3 = input->formatted.src_ip[3];
-
-	return 0;
-}
-
-/**
- *  ixgbe_atr_get_src_port_82599 - Gets the source port
- *  @input: input stream to modify
- *  @src_port: the source port to load
- *
- *  Even though the input is given in big-endian, the FDIRPORT registers
- *  expect the ports to be programmed in little-endian.  Hence the need to swap
- *  endianness when retrieving the data.  This can be confusing since the
- *  internal hash engine expects it to be big-endian.
- **/
-static s32 ixgbe_atr_get_src_port_82599(union ixgbe_atr_input *input,
-                                        __be16 *src_port)
-{
-	*src_port = input->formatted.src_port;
-
-	return 0;
-}
-
-/**
- *  ixgbe_atr_get_dst_port_82599 - Gets the destination port
- *  @input: input stream to modify
- *  @dst_port: the destination port to load
- *
- *  Even though the input is given in big-endian, the FDIRPORT registers
- *  expect the ports to be programmed in little-endian.  Hence the need to swap
- *  endianness when retrieving the data.  This can be confusing since the
- *  internal hash engine expects it to be big-endian.
- **/
-static s32 ixgbe_atr_get_dst_port_82599(union ixgbe_atr_input *input,
-                                        __be16 *dst_port)
-{
-	*dst_port = input->formatted.dst_port;
-
-	return 0;
-}
-
-/**
- *  ixgbe_atr_get_flex_byte_82599 - Gets the flexible bytes
- *  @input: input stream to modify
- *  @flex_bytes: the flexible bytes to load
- **/
-static s32 ixgbe_atr_get_flex_byte_82599(union ixgbe_atr_input *input,
-                                         __be16 *flex_bytes)
-{
-	*flex_bytes = input->formatted.flex_bytes;
-
-	return 0;
-}
-
-/**
- *  ixgbe_atr_get_l4type_82599 - Gets the layer 4 packet type
- *  @input: input stream to modify
- *  @l4type: the layer 4 type value to load
- **/
-static s32 ixgbe_atr_get_l4type_82599(union ixgbe_atr_input *input,
-                                      u8 *l4type)
-{
-	*l4type = input->formatted.flow_type;
-
-	return 0;
-}
-
 /**
  *  ixgbe_atr_add_signature_filter_82599 - Adds a signature hash filter
  *  @hw: pointer to hardware structure
@@ -1678,6 +1473,43 @@ s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw,
 	return 0;
 }
 
+/**
+ *  ixgbe_get_fdirtcpm_82599 - generate a tcp port from atr_input_masks
+ *  @input_mask: mask to be bit swapped
+ *
+ *  The source and destination port masks for flow director are bit swapped
+ *  in that bit 15 effects bit 0, 14 effects 1, 13, 2 etc.  In order to
+ *  generate a correctly swapped value we need to bit swap the mask and that
+ *  is what is accomplished by this function.
+ **/
+static u32 ixgbe_get_fdirtcpm_82599(struct ixgbe_atr_input_masks *input_masks)
+{
+	u32 mask = ntohs(input_masks->dst_port_mask);
+	mask <<= IXGBE_FDIRTCPM_DPORTM_SHIFT;
+	mask |= ntohs(input_masks->src_port_mask);
+	mask = ((mask & 0x55555555) << 1) | ((mask & 0xAAAAAAAA) >> 1);
+	mask = ((mask & 0x33333333) << 2) | ((mask & 0xCCCCCCCC) >> 2);
+	mask = ((mask & 0x0F0F0F0F) << 4) | ((mask & 0xF0F0F0F0) >> 4);
+	return ((mask & 0x00FF00FF) << 8) | ((mask & 0xFF00FF00) >> 8);
+}
+
+/*
+ * These two macros are meant to address the fact that we have registers
+ * that are either all or in part big-endian.  As a result on big-endian
+ * systems we will end up byte swapping the value to little-endian before
+ * it is byte swapped again and written to the hardware in the original
+ * big-endian format.
+ */
+#define IXGBE_STORE_AS_BE32(_value) \
+	(((u32)(_value) >> 24) | (((u32)(_value) & 0x00FF0000) >> 8) | \
+	 (((u32)(_value) & 0x0000FF00) << 8) | ((u32)(_value) << 24))
+
+#define IXGBE_WRITE_REG_BE32(a, reg, value) \
+	IXGBE_WRITE_REG((a), (reg), IXGBE_STORE_AS_BE32(ntohl(value)))
+
+#define IXGBE_STORE_AS_BE16(_value) \
+	(((u16)(_value) >> 8) | ((u16)(_value) << 8))
+
 /**
  *  ixgbe_fdir_add_perfect_filter_82599 - Adds a perfect filter
  *  @hw: pointer to hardware structure
@@ -1694,131 +1526,135 @@ s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw,
                                       struct ixgbe_atr_input_masks *input_masks,
                                       u16 soft_id, u8 queue)
 {
-	u32 fdircmd = 0;
 	u32 fdirhash;
-	u32 src_ipv4 = 0, dst_ipv4 = 0;
-	u32 src_ipv6_1, src_ipv6_2, src_ipv6_3, src_ipv6_4;
-	u16 src_port, dst_port, vlan_id, flex_bytes;
-	u16 bucket_hash;
-	u8  l4type;
-	u8  fdirm = 0;
-
-	/* Get our input values */
-	ixgbe_atr_get_l4type_82599(input, &l4type);
+	u32 fdircmd;
+	u32 fdirport, fdirtcpm;
+	u32 fdirvlan;
+	/* start with VLAN, flex bytes, VM pool, and IPv6 destination masked */
+	u32 fdirm = IXGBE_FDIRM_VLANID | IXGBE_FDIRM_VLANP | IXGBE_FDIRM_FLEX |
+		    IXGBE_FDIRM_POOL | IXGBE_FDIRM_DIPv6;
 
 	/*
-	 * Check l4type formatting, and bail out before we touch the hardware
+	 * Check flow_type formatting, and bail out before we touch the hardware
 	 * if there's a configuration issue
 	 */
-	switch (l4type & IXGBE_ATR_L4TYPE_MASK) {
-	case IXGBE_ATR_L4TYPE_TCP:
-		fdircmd |= IXGBE_FDIRCMD_L4TYPE_TCP;
-		break;
-	case IXGBE_ATR_L4TYPE_UDP:
-		fdircmd |= IXGBE_FDIRCMD_L4TYPE_UDP;
-		break;
-	case IXGBE_ATR_L4TYPE_SCTP:
-		fdircmd |= IXGBE_FDIRCMD_L4TYPE_SCTP;
+	switch (input->formatted.flow_type) {
+	case IXGBE_ATR_FLOW_TYPE_IPV4:
+		/* use the L4 protocol mask for raw IPv4/IPv6 traffic */
+		fdirm |= IXGBE_FDIRM_L4P;
+	case IXGBE_ATR_FLOW_TYPE_SCTPV4:
+		if (input_masks->dst_port_mask || input_masks->src_port_mask) {
+			hw_dbg(hw, " Error on src/dst port mask\n");
+			return IXGBE_ERR_CONFIG;
+		}
+	case IXGBE_ATR_FLOW_TYPE_TCPV4:
+	case IXGBE_ATR_FLOW_TYPE_UDPV4:
 		break;
 	default:
-		hw_dbg(hw, "Error on l4type input\n");
+		hw_dbg(hw, " Error on flow type input\n");
 		return IXGBE_ERR_CONFIG;
 	}
 
-	bucket_hash = ixgbe_atr_compute_hash_82599(input,
-	                                           IXGBE_ATR_BUCKET_HASH_KEY);
-
-	/* bucket_hash is only 15 bits */
-	bucket_hash &= IXGBE_ATR_HASH_MASK;
-
-	ixgbe_atr_get_vlan_id_82599(input, &vlan_id);
-	ixgbe_atr_get_src_port_82599(input, &src_port);
-	ixgbe_atr_get_dst_port_82599(input, &dst_port);
-	ixgbe_atr_get_flex_byte_82599(input, &flex_bytes);
-
-	fdirhash = soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT | bucket_hash;
-
-	/* Now figure out if we're IPv4 or IPv6 */
-	if (l4type & IXGBE_ATR_L4TYPE_IPV6_MASK) {
-		/* IPv6 */
-		ixgbe_atr_get_src_ipv6_82599(input, &src_ipv6_1, &src_ipv6_2,
-	                                     &src_ipv6_3, &src_ipv6_4);
-
-		IXGBE_WRITE_REG(hw, IXGBE_FDIRSIPv6(0), src_ipv6_1);
-		IXGBE_WRITE_REG(hw, IXGBE_FDIRSIPv6(1), src_ipv6_2);
-		IXGBE_WRITE_REG(hw, IXGBE_FDIRSIPv6(2), src_ipv6_3);
-		/* The last 4 bytes is the same register as IPv4 */
-		IXGBE_WRITE_REG(hw, IXGBE_FDIRIPSA, src_ipv6_4);
-
-		fdircmd |= IXGBE_FDIRCMD_IPV6;
-		fdircmd |= IXGBE_FDIRCMD_IPv6DMATCH;
-	} else {
-		/* IPv4 */
-		ixgbe_atr_get_src_ipv4_82599(input, &src_ipv4);
-		IXGBE_WRITE_REG(hw, IXGBE_FDIRIPSA, src_ipv4);
-	}
-
-	ixgbe_atr_get_dst_ipv4_82599(input, &dst_ipv4);
-	IXGBE_WRITE_REG(hw, IXGBE_FDIRIPDA, dst_ipv4);
-
-	IXGBE_WRITE_REG(hw, IXGBE_FDIRVLAN, (vlan_id |
-	                            (flex_bytes << IXGBE_FDIRVLAN_FLEX_SHIFT)));
-	IXGBE_WRITE_REG(hw, IXGBE_FDIRPORT, (src_port |
-	              (dst_port << IXGBE_FDIRPORT_DESTINATION_SHIFT)));
-
 	/*
-	 * Program the relevant mask registers.  L4type cannot be
-	 * masked out in this implementation.
+	 * Program the relevant mask registers.  If src/dst_port or src/dst_addr
+	 * are zero, then assume a full mask for that field.  Also assume that
+	 * a VLAN of 0 is unspecified, so mask that out as well.  L4type
+	 * cannot be masked out in this implementation.
 	 *
 	 * This also assumes IPv4 only.  IPv6 masking isn't supported at this
 	 * point in time.
 	 */
-	IXGBE_WRITE_REG(hw, IXGBE_FDIRSIP4M, input_masks->src_ip_mask);
-	IXGBE_WRITE_REG(hw, IXGBE_FDIRDIP4M, input_masks->dst_ip_mask);
-
-	switch (l4type & IXGBE_ATR_L4TYPE_MASK) {
-	case IXGBE_ATR_L4TYPE_TCP:
-		IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM, input_masks->src_port_mask);
-		IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM,
-				(IXGBE_READ_REG(hw, IXGBE_FDIRTCPM) |
-				 (input_masks->dst_port_mask << 16)));
+
+	/* Program FDIRM */
+	switch (ntohs(input_masks->vlan_id_mask) & 0xEFFF) {
+	case 0xEFFF:
+		/* Unmask VLAN ID - bit 0 and fall through to unmask prio */
+		fdirm &= ~IXGBE_FDIRM_VLANID;
+	case 0xE000:
+		/* Unmask VLAN prio - bit 1 */
+		fdirm &= ~IXGBE_FDIRM_VLANP;
 		break;
-	case IXGBE_ATR_L4TYPE_UDP:
-		IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM, input_masks->src_port_mask);
-		IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM,
-				(IXGBE_READ_REG(hw, IXGBE_FDIRUDPM) |
-				 (input_masks->src_port_mask << 16)));
+	case 0x0FFF:
+		/* Unmask VLAN ID - bit 0 */
+		fdirm &= ~IXGBE_FDIRM_VLANID;
 		break;
-	default:
-		/* this already would have failed above */
+	case 0x0000:
+		/* do nothing, vlans already masked */
 		break;
+	default:
+		hw_dbg(hw, " Error on VLAN mask\n");
+		return IXGBE_ERR_CONFIG;
 	}
 
-	/* Program the last mask register, FDIRM */
-	if (input_masks->vlan_id_mask)
-		/* Mask both VLAN and VLANP - bits 0 and 1 */
-		fdirm |= 0x3;
-
-	if (input_masks->data_mask)
-		/* Flex bytes need masking, so mask the whole thing - bit 4 */
-		fdirm |= 0x10;
+	if (input_masks->flex_mask & 0xFFFF) {
+		if ((input_masks->flex_mask & 0xFFFF) != 0xFFFF) {
+			hw_dbg(hw, " Error on flexible byte mask\n");
+			return IXGBE_ERR_CONFIG;
+		}
+		/* Unmask Flex Bytes - bit 4 */
+		fdirm &= ~IXGBE_FDIRM_FLEX;
+	}
 
 	/* Now mask VM pool and destination IPv6 - bits 5 and 2 */
-	fdirm |= 0x24;
-
 	IXGBE_WRITE_REG(hw, IXGBE_FDIRM, fdirm);
 
-	fdircmd |= IXGBE_FDIRCMD_CMD_ADD_FLOW;
-	fdircmd |= IXGBE_FDIRCMD_FILTER_UPDATE;
-	fdircmd |= IXGBE_FDIRCMD_LAST;
-	fdircmd |= IXGBE_FDIRCMD_QUEUE_EN;
-	fdircmd |= queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT;
+	/* store the TCP/UDP port masks, bit reversed from port layout */
+	fdirtcpm = ixgbe_get_fdirtcpm_82599(input_masks);
+
+	/* write both the same so that UDP and TCP use the same mask */
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM, ~fdirtcpm);
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM, ~fdirtcpm);
+
+	/* store source and destination IP masks (big-enian) */
+	IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIP4M,
+			     ~input_masks->src_ip_mask[0]);
+	IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRDIP4M,
+			     ~input_masks->dst_ip_mask[0]);
+
+	/* Apply masks to input data */
+	input->formatted.vlan_id &= input_masks->vlan_id_mask;
+	input->formatted.flex_bytes &= input_masks->flex_mask;
+	input->formatted.src_port &= input_masks->src_port_mask;
+	input->formatted.dst_port &= input_masks->dst_port_mask;
+	input->formatted.src_ip[0] &= input_masks->src_ip_mask[0];
+	input->formatted.dst_ip[0] &= input_masks->dst_ip_mask[0];
+
+	/* record vlan (little-endian) and flex_bytes(big-endian) */
+	fdirvlan =
+		IXGBE_STORE_AS_BE16(ntohs(input->formatted.flex_bytes));
+	fdirvlan <<= IXGBE_FDIRVLAN_FLEX_SHIFT;
+	fdirvlan |= ntohs(input->formatted.vlan_id);
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRVLAN, fdirvlan);
+
+	/* record source and destination port (little-endian)*/
+	fdirport = ntohs(input->formatted.dst_port);
+	fdirport <<= IXGBE_FDIRPORT_DESTINATION_SHIFT;
+	fdirport |= ntohs(input->formatted.src_port);
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRPORT, fdirport);
+
+	/* record the first 32 bits of the destination address (big-endian) */
+	IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPDA, input->formatted.dst_ip[0]);
+
+	/* record the source address (big-endian) */
+	IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPSA, input->formatted.src_ip[0]);
+
+	/* configure FDIRCMD register */
+	fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE |
+		  IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN;
+	fdircmd |= input->formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT;
+	fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT;
+
+	/* we only want the bucket hash so drop the upper 16 bits */
+	fdirhash = ixgbe_atr_compute_hash_82599(input,
+						IXGBE_ATR_BUCKET_HASH_KEY);
+	fdirhash |= soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT;
 
 	IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash);
 	IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, fdircmd);
 
 	return 0;
 }
+
 /**
  *  ixgbe_read_analog_reg8_82599 - Reads 8 bit Omer analog register
  *  @hw: pointer to hardware structure
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index 76e40e2b37e5..2002ea88ca2a 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -2277,10 +2277,11 @@ static int ixgbe_set_rx_ntuple(struct net_device *dev,
                                struct ethtool_rx_ntuple *cmd)
 {
 	struct ixgbe_adapter *adapter = netdev_priv(dev);
-	struct ethtool_rx_ntuple_flow_spec fs = cmd->fs;
+	struct ethtool_rx_ntuple_flow_spec *fs = &cmd->fs;
 	union ixgbe_atr_input input_struct;
 	struct ixgbe_atr_input_masks input_masks;
 	int target_queue;
+	int err;
 
 	if (adapter->hw.mac.type == ixgbe_mac_82598EB)
 		return -EOPNOTSUPP;
@@ -2289,67 +2290,122 @@ static int ixgbe_set_rx_ntuple(struct net_device *dev,
 	 * Don't allow programming if the action is a queue greater than
 	 * the number of online Tx queues.
 	 */
-	if ((fs.action >= adapter->num_tx_queues) ||
-	    (fs.action < ETHTOOL_RXNTUPLE_ACTION_DROP))
+	if ((fs->action >= adapter->num_tx_queues) ||
+	    (fs->action < ETHTOOL_RXNTUPLE_ACTION_DROP))
 		return -EINVAL;
 
 	memset(&input_struct, 0, sizeof(union ixgbe_atr_input));
 	memset(&input_masks, 0, sizeof(struct ixgbe_atr_input_masks));
 
-	input_masks.src_ip_mask = fs.m_u.tcp_ip4_spec.ip4src;
-	input_masks.dst_ip_mask = fs.m_u.tcp_ip4_spec.ip4dst;
-	input_masks.src_port_mask = fs.m_u.tcp_ip4_spec.psrc;
-	input_masks.dst_port_mask = fs.m_u.tcp_ip4_spec.pdst;
-	input_masks.vlan_id_mask = fs.vlan_tag_mask;
-	/* only use the lowest 2 bytes for flex bytes */
-	input_masks.data_mask = (fs.data_mask & 0xffff);
-
-	switch (fs.flow_type) {
+	/* record flow type */
+	switch (fs->flow_type) {
+	case IPV4_FLOW:
+		input_struct.formatted.flow_type = IXGBE_ATR_FLOW_TYPE_IPV4;
+		break;
 	case TCP_V4_FLOW:
-		ixgbe_atr_set_l4type_82599(&input_struct, IXGBE_ATR_L4TYPE_TCP);
+		input_struct.formatted.flow_type = IXGBE_ATR_FLOW_TYPE_TCPV4;
 		break;
 	case UDP_V4_FLOW:
-		ixgbe_atr_set_l4type_82599(&input_struct, IXGBE_ATR_L4TYPE_UDP);
+		input_struct.formatted.flow_type = IXGBE_ATR_FLOW_TYPE_UDPV4;
 		break;
 	case SCTP_V4_FLOW:
-		ixgbe_atr_set_l4type_82599(&input_struct, IXGBE_ATR_L4TYPE_SCTP);
+		input_struct.formatted.flow_type = IXGBE_ATR_FLOW_TYPE_SCTPV4;
 		break;
 	default:
 		return -1;
 	}
 
-	/* Mask bits from the inputs based on user-supplied mask */
-	ixgbe_atr_set_src_ipv4_82599(&input_struct,
-	            (fs.h_u.tcp_ip4_spec.ip4src & ~fs.m_u.tcp_ip4_spec.ip4src));
-	ixgbe_atr_set_dst_ipv4_82599(&input_struct,
-	            (fs.h_u.tcp_ip4_spec.ip4dst & ~fs.m_u.tcp_ip4_spec.ip4dst));
-	/* 82599 expects these to be byte-swapped for perfect filtering */
-	ixgbe_atr_set_src_port_82599(&input_struct,
-	       ((ntohs(fs.h_u.tcp_ip4_spec.psrc)) & ~fs.m_u.tcp_ip4_spec.psrc));
-	ixgbe_atr_set_dst_port_82599(&input_struct,
-	       ((ntohs(fs.h_u.tcp_ip4_spec.pdst)) & ~fs.m_u.tcp_ip4_spec.pdst));
-
-	/* VLAN and Flex bytes are either completely masked or not */
-	if (!fs.vlan_tag_mask)
-		ixgbe_atr_set_vlan_id_82599(&input_struct, fs.vlan_tag);
-
-	if (!input_masks.data_mask)
-		/* make sure we only use the first 2 bytes of user data */
-		ixgbe_atr_set_flex_byte_82599(&input_struct,
-		                              (fs.data & 0xffff));
+	/* copy vlan tag minus the CFI bit */
+	if ((fs->vlan_tag & 0xEFFF) || (~fs->vlan_tag_mask & 0xEFFF)) {
+		input_struct.formatted.vlan_id = htons(fs->vlan_tag & 0xEFFF);
+		if (!fs->vlan_tag_mask) {
+			input_masks.vlan_id_mask = htons(0xEFFF);
+		} else {
+			switch (~fs->vlan_tag_mask & 0xEFFF) {
+			/* all of these are valid vlan-mask values */
+			case 0xEFFF:
+			case 0xE000:
+			case 0x0FFF:
+			case 0x0000:
+				input_masks.vlan_id_mask =
+					htons(~fs->vlan_tag_mask);
+				break;
+			/* exit with error if vlan-mask is invalid */
+			default:
+				e_err(drv, "Partial VLAN ID or "
+				      "priority mask in vlan-mask is not "
+				      "supported by hardware\n");
+				return -1;
+			}
+		}
+	}
+
+	/* make sure we only use the first 2 bytes of user data */
+	if ((fs->data & 0xFFFF) || (~fs->data_mask & 0xFFFF)) {
+		input_struct.formatted.flex_bytes = htons(fs->data & 0xFFFF);
+		if (!(fs->data_mask & 0xFFFF)) {
+			input_masks.flex_mask = 0xFFFF;
+		} else if (~fs->data_mask & 0xFFFF) {
+			e_err(drv, "Partial user-def-mask is not "
+			      "supported by hardware\n");
+			return -1;
+		}
+	}
+
+	/*
+	 * Copy input into formatted structures
+	 *
+	 * These assignments are based on the following logic
+	 * If neither input or mask are set assume value is masked out.
+	 * If input is set, but mask is not mask should default to accept all.
+	 * If input is not set, but mask is set then mask likely results in 0.
+	 * If input is set and mask is set then assign both.
+	 */
+	if (fs->h_u.tcp_ip4_spec.ip4src || ~fs->m_u.tcp_ip4_spec.ip4src) {
+		input_struct.formatted.src_ip[0] = fs->h_u.tcp_ip4_spec.ip4src;
+		if (!fs->m_u.tcp_ip4_spec.ip4src)
+			input_masks.src_ip_mask[0] = 0xFFFFFFFF;
+		else
+			input_masks.src_ip_mask[0] =
+				~fs->m_u.tcp_ip4_spec.ip4src;
+	}
+	if (fs->h_u.tcp_ip4_spec.ip4dst || ~fs->m_u.tcp_ip4_spec.ip4dst) {
+		input_struct.formatted.dst_ip[0] = fs->h_u.tcp_ip4_spec.ip4dst;
+		if (!fs->m_u.tcp_ip4_spec.ip4dst)
+			input_masks.dst_ip_mask[0] = 0xFFFFFFFF;
+		else
+			input_masks.dst_ip_mask[0] =
+				~fs->m_u.tcp_ip4_spec.ip4dst;
+	}
+	if (fs->h_u.tcp_ip4_spec.psrc || ~fs->m_u.tcp_ip4_spec.psrc) {
+		input_struct.formatted.src_port = fs->h_u.tcp_ip4_spec.psrc;
+		if (!fs->m_u.tcp_ip4_spec.psrc)
+			input_masks.src_port_mask = 0xFFFF;
+		else
+			input_masks.src_port_mask = ~fs->m_u.tcp_ip4_spec.psrc;
+	}
+	if (fs->h_u.tcp_ip4_spec.pdst || ~fs->m_u.tcp_ip4_spec.pdst) {
+		input_struct.formatted.dst_port = fs->h_u.tcp_ip4_spec.pdst;
+		if (!fs->m_u.tcp_ip4_spec.pdst)
+			input_masks.dst_port_mask = 0xFFFF;
+		else
+			input_masks.dst_port_mask = ~fs->m_u.tcp_ip4_spec.pdst;
+	}
 
 	/* determine if we need to drop or route the packet */
-	if (fs.action == ETHTOOL_RXNTUPLE_ACTION_DROP)
+	if (fs->action == ETHTOOL_RXNTUPLE_ACTION_DROP)
 		target_queue = MAX_RX_QUEUES - 1;
 	else
-		target_queue = fs.action;
+		target_queue = fs->action;
 
 	spin_lock(&adapter->fdir_perfect_lock);
-	ixgbe_fdir_add_perfect_filter_82599(&adapter->hw, &input_struct,
-	                                    &input_masks, 0, target_queue);
+	err = ixgbe_fdir_add_perfect_filter_82599(&adapter->hw,
+						  &input_struct,
+						  &input_masks, 0,
+						  target_queue);
 	spin_unlock(&adapter->fdir_perfect_lock);
 
-	return 0;
+	return err ? -1 : 0;
 }
 
 static const struct ethtool_ops ixgbe_ethtool_ops = {
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 490818c46d74..a060610a42db 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -4821,6 +4821,12 @@ static int ixgbe_set_interrupt_capability(struct ixgbe_adapter *adapter)
 
 	adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED;
 	adapter->flags &= ~IXGBE_FLAG_RSS_ENABLED;
+	if (adapter->flags & (IXGBE_FLAG_FDIR_HASH_CAPABLE |
+			      IXGBE_FLAG_FDIR_PERFECT_CAPABLE)) {
+		e_err(probe,
+		      "Flow Director is not supported while multiple "
+		      "queues are disabled.  Disabling Flow Director\n");
+	}
 	adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
 	adapter->flags &= ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
 	adapter->atr_sample_rate = 0;
@@ -5126,16 +5132,11 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
 		adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED;
 		if (hw->device_id == IXGBE_DEV_ID_82599_T3_LOM)
 			adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_CAPABLE;
-		if (dev->features & NETIF_F_NTUPLE) {
-			/* Flow Director perfect filter enabled */
-			adapter->flags |= IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
-			adapter->atr_sample_rate = 0;
-			spin_lock_init(&adapter->fdir_perfect_lock);
-		} else {
-			/* Flow Director hash filters enabled */
-			adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
-			adapter->atr_sample_rate = 20;
-		}
+		/* n-tuple support exists, always init our spinlock */
+		spin_lock_init(&adapter->fdir_perfect_lock);
+		/* Flow Director hash filters enabled */
+		adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
+		adapter->atr_sample_rate = 20;
 		adapter->ring_feature[RING_F_FDIR].indices =
 							 IXGBE_MAX_FDIR_INDICES;
 		adapter->fdir_pballoc = 0;
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index 0d9392d92a0f..fd3358f54139 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -1947,10 +1947,9 @@ enum ixgbe_fdir_pballoc_type {
 #define IXGBE_FDIRM_VLANID                      0x00000001
 #define IXGBE_FDIRM_VLANP                       0x00000002
 #define IXGBE_FDIRM_POOL                        0x00000004
-#define IXGBE_FDIRM_L3P                         0x00000008
-#define IXGBE_FDIRM_L4P                         0x00000010
-#define IXGBE_FDIRM_FLEX                        0x00000020
-#define IXGBE_FDIRM_DIPv6                       0x00000040
+#define IXGBE_FDIRM_L4P                         0x00000008
+#define IXGBE_FDIRM_FLEX                        0x00000010
+#define IXGBE_FDIRM_DIPv6                       0x00000020
 
 #define IXGBE_FDIRFREE_FREE_MASK                0xFFFF
 #define IXGBE_FDIRFREE_FREE_SHIFT               0
@@ -2215,12 +2214,13 @@ union ixgbe_atr_hash_dword {
 };
 
 struct ixgbe_atr_input_masks {
-	__be32 src_ip_mask;
-	__be32 dst_ip_mask;
+	__be16 rsvd0;
+	__be16 vlan_id_mask;
+	__be32 dst_ip_mask[4];
+	__be32 src_ip_mask[4];
 	__be16 src_port_mask;
 	__be16 dst_port_mask;
-	__be16 vlan_id_mask;
-	__be16 data_mask;
+	__be16 flex_mask;
 };
 
 enum ixgbe_eeprom_type {
-- 
cgit v1.2.3


From c6dd5098f47268976f7d0af3dad29084fd8b6b98 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier@gentoo.org>
Date: Mon, 10 Jan 2011 02:54:29 +0000
Subject: netdev: bfin_mac: clean up printk messages

Use netdev_* and pr_* helper funcs for output rather than printk.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bfin_mac.c | 65 ++++++++++++++++++++++----------------------------
 1 file changed, 29 insertions(+), 36 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index ce1e5e9d06f6..a572bcb92d98 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -8,6 +8,11 @@
  * Licensed under the GPL-2 or later.
  */
 
+#define DRV_VERSION	"1.1"
+#define DRV_DESC	"Blackfin on-chip Ethernet MAC driver"
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
@@ -41,12 +46,7 @@
 
 #include "bfin_mac.h"
 
-#define DRV_NAME	"bfin_mac"
-#define DRV_VERSION	"1.1"
-#define DRV_AUTHOR	"Bryan Wu, Luke Yang"
-#define DRV_DESC	"Blackfin on-chip Ethernet MAC driver"
-
-MODULE_AUTHOR(DRV_AUTHOR);
+MODULE_AUTHOR("Bryan Wu, Luke Yang");
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION(DRV_DESC);
 MODULE_ALIAS("platform:bfin_mac");
@@ -189,8 +189,7 @@ static int desc_list_init(void)
 		/* allocate a new skb for next time receive */
 		new_skb = dev_alloc_skb(PKT_BUF_SZ + NET_IP_ALIGN);
 		if (!new_skb) {
-			printk(KERN_NOTICE DRV_NAME
-			       ": init: low on mem - packet dropped\n");
+			pr_notice("init: low on mem - packet dropped\n");
 			goto init_error;
 		}
 		skb_reserve(new_skb, NET_IP_ALIGN);
@@ -240,7 +239,7 @@ static int desc_list_init(void)
 
 init_error:
 	desc_list_free();
-	printk(KERN_ERR DRV_NAME ": kmalloc failed\n");
+	pr_err("kmalloc failed\n");
 	return -ENOMEM;
 }
 
@@ -259,8 +258,7 @@ static int bfin_mdio_poll(void)
 	while ((bfin_read_EMAC_STAADD()) & STABUSY) {
 		udelay(1);
 		if (timeout_cnt-- < 0) {
-			printk(KERN_ERR DRV_NAME
-			": wait MDC/MDIO transaction to complete timeout\n");
+			pr_err("wait MDC/MDIO transaction to complete timeout\n");
 			return -ETIMEDOUT;
 		}
 	}
@@ -350,9 +348,9 @@ static void bfin_mac_adjust_link(struct net_device *dev)
 					opmode &= ~RMII_10;
 					break;
 				default:
-					printk(KERN_WARNING
-						"%s: Ack!  Speed (%d) is not 10/100!\n",
-						DRV_NAME, phydev->speed);
+					netdev_warn(dev,
+						"Ack! Speed (%d) is not 10/100!\n",
+						phydev->speed);
 					break;
 				}
 				bfin_write_EMAC_OPMODE(opmode);
@@ -417,14 +415,13 @@ static int mii_probe(struct net_device *dev, int phy_mode)
 
 	/* now we are supposed to have a proper phydev, to attach to... */
 	if (!phydev) {
-		printk(KERN_INFO "%s: Don't found any phy device at all\n",
-			dev->name);
+		netdev_err(dev, "no phy device found\n");
 		return -ENODEV;
 	}
 
 	if (phy_mode != PHY_INTERFACE_MODE_RMII &&
 		phy_mode != PHY_INTERFACE_MODE_MII) {
-		printk(KERN_INFO "%s: Invalid phy interface mode\n", dev->name);
+		netdev_err(dev, "invalid phy interface mode\n");
 		return -EINVAL;
 	}
 
@@ -432,7 +429,7 @@ static int mii_probe(struct net_device *dev, int phy_mode)
 			0, phy_mode);
 
 	if (IS_ERR(phydev)) {
-		printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
+		netdev_err(dev, "could not attach PHY\n");
 		return PTR_ERR(phydev);
 	}
 
@@ -453,11 +450,10 @@ static int mii_probe(struct net_device *dev, int phy_mode)
 	lp->old_duplex = -1;
 	lp->phydev = phydev;
 
-	printk(KERN_INFO "%s: attached PHY driver [%s] "
-	       "(mii_bus:phy_addr=%s, irq=%d, mdc_clk=%dHz(mdc_div=%d)"
-	       "@sclk=%dMHz)\n",
-	       DRV_NAME, phydev->drv->name, dev_name(&phydev->dev), phydev->irq,
-	       MDC_CLK, mdc_div, sclk/1000000);
+	pr_info("attached PHY driver [%s] "
+	        "(mii_bus:phy_addr=%s, irq=%d, mdc_clk=%dHz(mdc_div=%d)@sclk=%dMHz)\n",
+	        phydev->drv->name, dev_name(&phydev->dev), phydev->irq,
+	        MDC_CLK, mdc_div, sclk/1000000);
 
 	return 0;
 }
@@ -502,7 +498,7 @@ bfin_mac_ethtool_setsettings(struct net_device *dev, struct ethtool_cmd *cmd)
 static void bfin_mac_ethtool_getdrvinfo(struct net_device *dev,
 					struct ethtool_drvinfo *info)
 {
-	strcpy(info->driver, DRV_NAME);
+	strcpy(info->driver, KBUILD_MODNAME);
 	strcpy(info->version, DRV_VERSION);
 	strcpy(info->fw_version, "N/A");
 	strcpy(info->bus_info, dev_name(&dev->dev));
@@ -827,8 +823,7 @@ static void bfin_tx_hwtstamp(struct net_device *netdev, struct sk_buff *skb)
 		while ((!(bfin_read_EMAC_PTP_ISTAT() & TXTL)) && (--timeout_cnt))
 			udelay(1);
 		if (timeout_cnt == 0)
-			printk(KERN_ERR DRV_NAME
-					": fails to timestamp the TX packet\n");
+			netdev_err(netdev, "timestamp the TX packet failed\n");
 		else {
 			struct skb_shared_hwtstamps shhwtstamps;
 			u64 ns;
@@ -1083,8 +1078,7 @@ static void bfin_mac_rx(struct net_device *dev)
 	 * we which case we simply drop the packet
 	 */
 	if (current_rx_ptr->status.status_word & RX_ERROR_MASK) {
-		printk(KERN_NOTICE DRV_NAME
-		       ": rx: receive error - packet dropped\n");
+		netdev_notice(dev, "rx: receive error - packet dropped\n");
 		dev->stats.rx_dropped++;
 		goto out;
 	}
@@ -1094,8 +1088,7 @@ static void bfin_mac_rx(struct net_device *dev)
 
 	new_skb = dev_alloc_skb(PKT_BUF_SZ + NET_IP_ALIGN);
 	if (!new_skb) {
-		printk(KERN_NOTICE DRV_NAME
-		       ": rx: low on mem - packet dropped\n");
+		netdev_notice(dev, "rx: low on mem - packet dropped\n");
 		dev->stats.rx_dropped++;
 		goto out;
 	}
@@ -1213,7 +1206,7 @@ static int bfin_mac_enable(struct phy_device *phydev)
 	int ret;
 	u32 opmode;
 
-	pr_debug("%s: %s\n", DRV_NAME, __func__);
+	pr_debug("%s\n", __func__);
 
 	/* Set RX DMA */
 	bfin_write_DMA1_NEXT_DESC_PTR(&(rx_list_head->desc_a));
@@ -1323,7 +1316,7 @@ static void bfin_mac_set_multicast_list(struct net_device *dev)
 	u32 sysctl;
 
 	if (dev->flags & IFF_PROMISC) {
-		printk(KERN_INFO "%s: set to promisc mode\n", dev->name);
+		netdev_info(dev, "set promisc mode\n");
 		sysctl = bfin_read_EMAC_OPMODE();
 		sysctl |= PR;
 		bfin_write_EMAC_OPMODE(sysctl);
@@ -1393,7 +1386,7 @@ static int bfin_mac_open(struct net_device *dev)
 	 * address using ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx
 	 */
 	if (!is_valid_ether_addr(dev->dev_addr)) {
-		printk(KERN_WARNING DRV_NAME ": no valid ethernet hw addr\n");
+		netdev_warn(dev, "no valid ethernet hw addr\n");
 		return -EINVAL;
 	}
 
@@ -1558,7 +1551,7 @@ static int __devinit bfin_mac_probe(struct platform_device *pdev)
 	bfin_mac_hwtstamp_init(ndev);
 
 	/* now, print out the card info, in a short format.. */
-	dev_info(&pdev->dev, "%s, Version %s\n", DRV_DESC, DRV_VERSION);
+	netdev_info(ndev, "%s, Version %s\n", DRV_DESC, DRV_VERSION);
 
 	return 0;
 
@@ -1650,7 +1643,7 @@ static int __devinit bfin_mii_bus_probe(struct platform_device *pdev)
 	 * so set the GPIO pins to Ethernet mode
 	 */
 	pin_req = mii_bus_pd->mac_peripherals;
-	rc = peripheral_request_list(pin_req, DRV_NAME);
+	rc = peripheral_request_list(pin_req, KBUILD_MODNAME);
 	if (rc) {
 		dev_err(&pdev->dev, "Requesting peripherals failed!\n");
 		return rc;
@@ -1739,7 +1732,7 @@ static struct platform_driver bfin_mac_driver = {
 	.resume = bfin_mac_resume,
 	.suspend = bfin_mac_suspend,
 	.driver = {
-		.name = DRV_NAME,
+		.name = KBUILD_MODNAME,
 		.owner	= THIS_MODULE,
 	},
 };
-- 
cgit v1.2.3


From 5ca1bb5aceb0bccf532ffc21588585a925cdee20 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier@gentoo.org>
Date: Mon, 10 Jan 2011 02:54:30 +0000
Subject: netdev: bfin_mac: mark setup_system_regs as static

No need for this to be exported since it is only used in this driver.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bfin_mac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index a572bcb92d98..e712be4a6433 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -558,7 +558,7 @@ static const struct ethtool_ops bfin_mac_ethtool_ops = {
 };
 
 /**************************************************************************/
-void setup_system_regs(struct net_device *dev)
+static void setup_system_regs(struct net_device *dev)
 {
 	struct bfin_mac_local *lp = netdev_priv(dev);
 	int i;
-- 
cgit v1.2.3


From 53ed29841dfffa71c68e5cd3e601da195235ff5b Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier@gentoo.org>
Date: Mon, 10 Jan 2011 02:54:31 +0000
Subject: netdev: bfin_mac: drop unused Mac data

We don't use this local "Mac" data anywhere (since we rely on the
netdev's storage), so punt it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bfin_mac.h | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/bfin_mac.h b/drivers/net/bfin_mac.h
index aed68bed2365..4827f6b8238e 100644
--- a/drivers/net/bfin_mac.h
+++ b/drivers/net/bfin_mac.h
@@ -68,7 +68,6 @@ struct bfin_mac_local {
 	 */
 	struct net_device_stats stats;
 
-	unsigned char Mac[6];	/* MAC address of the board */
 	spinlock_t lock;
 
 	int wol;		/* Wake On Lan */
-- 
cgit v1.2.3


From 2d70a3d42de642e1d78355338b63cf064dc0f345 Mon Sep 17 00:00:00 2001
From: Sonic Zhang <sonic.zhang@analog.com>
Date: Mon, 10 Jan 2011 02:54:33 +0000
Subject: netdev: bfin_mac: disable hardware checksum if writeback cache is
 enabled

With writeback caches, corrupted RX packets will be sent up the stack
without any error markings.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bfin_mac.h | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'drivers')

diff --git a/drivers/net/bfin_mac.h b/drivers/net/bfin_mac.h
index 4827f6b8238e..692187da99f0 100644
--- a/drivers/net/bfin_mac.h
+++ b/drivers/net/bfin_mac.h
@@ -17,7 +17,14 @@
 #include <linux/etherdevice.h>
 #include <linux/bfin_mac.h>
 
+/*
+ * Disable hardware checksum for bug #5600 if writeback cache is
+ * enabled. Otherwize, corrupted RX packet will be sent up stack
+ * without error mark.
+ */
+#ifndef CONFIG_BFIN_EXTMEM_WRITEBACK
 #define BFIN_MAC_CSUM_OFFLOAD
+#endif
 
 #define TX_RECLAIM_JIFFIES (HZ / 5)
 
-- 
cgit v1.2.3


From c599bd6b9ac8926b03e6bf332a8c14ae2ffb43a3 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier@gentoo.org>
Date: Mon, 10 Jan 2011 02:54:32 +0000
Subject: netdev: bfin_mac: let boards set vlan masks

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bfin_mac.c | 7 +++++++
 drivers/net/bfin_mac.h | 3 +++
 2 files changed, 10 insertions(+)

(limited to 'drivers')

diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index e712be4a6433..0b9fc5173aef 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -588,6 +588,10 @@ static void setup_system_regs(struct net_device *dev)
 
 	bfin_write_EMAC_MMC_CTL(RSTC | CROLL);
 
+	/* Set vlan regs to let 1522 bytes long packets pass through */
+	bfin_write_EMAC_VLAN1(lp->vlan1_mask);
+	bfin_write_EMAC_VLAN2(lp->vlan2_mask);
+
 	/* Initialize the TX DMA channel registers */
 	bfin_write_DMA2_X_COUNT(0);
 	bfin_write_DMA2_X_MODIFY(4);
@@ -1520,6 +1524,9 @@ static int __devinit bfin_mac_probe(struct platform_device *pdev)
 		goto out_err_mii_probe;
 	}
 
+	lp->vlan1_mask = ETH_P_8021Q | mii_bus_data->vlan1_mask;
+	lp->vlan2_mask = ETH_P_8021Q | mii_bus_data->vlan2_mask;
+
 	/* Fill in the fields of the device structure with ethernet values. */
 	ether_setup(ndev);
 
diff --git a/drivers/net/bfin_mac.h b/drivers/net/bfin_mac.h
index 692187da99f0..f8559ac9a403 100644
--- a/drivers/net/bfin_mac.h
+++ b/drivers/net/bfin_mac.h
@@ -82,6 +82,9 @@ struct bfin_mac_local {
 	struct timer_list tx_reclaim_timer;
 	struct net_device *ndev;
 
+	/* Data for EMAC_VLAN1 regs */
+	u16 vlan1_mask, vlan2_mask;
+
 	/* MII and PHY stuffs */
 	int old_link;          /* used by bf537_adjust_link */
 	int old_speed;
-- 
cgit v1.2.3


From 0e5f20b656c14d91efe61240d44b6f4b53ea939e Mon Sep 17 00:00:00 2001
From: amit salecha <amit.salecha@qlogic.com>
Date: Mon, 10 Jan 2011 00:15:21 +0000
Subject: qlcnic: fix flash fw version read

Driver is reading flash fw version from defined address, this address
may be invalid. Indeed Driver should read address for fw version through
flash layout table. Flash layout table has defined region and address for
fw version address should be read from fw image region.

Driver has check for old firmware, this bug can cause driver load fail.
This patch will try to read fw version from flash image region, if that fails,
read from defined address.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlcnic/qlcnic.h      | 20 +++++++++++++
 drivers/net/qlcnic/qlcnic_init.c | 63 +++++++++++++++++++++++++++++++++++++++-
 2 files changed, 82 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/qlcnic/qlcnic.h b/drivers/net/qlcnic/qlcnic.h
index 9c2a02d204dc..14b6322aeee1 100644
--- a/drivers/net/qlcnic/qlcnic.h
+++ b/drivers/net/qlcnic/qlcnic.h
@@ -289,6 +289,26 @@ struct uni_data_desc{
 	u32	reserved[5];
 };
 
+/* Flash Defines and Structures */
+#define QLCNIC_FLT_LOCATION	0x3F1000
+#define QLCNIC_FW_IMAGE_REGION	0x74
+struct qlcnic_flt_header {
+	u16 version;
+	u16 len;
+	u16 checksum;
+	u16 reserved;
+};
+
+struct qlcnic_flt_entry {
+	u8 region;
+	u8 reserved0;
+	u8 attrib;
+	u8 reserved1;
+	u32 size;
+	u32 start_addr;
+	u32 end_add;
+};
+
 /* Magic number to let user know flash is programmed */
 #define	QLCNIC_BDINFO_MAGIC 0x12345678
 
diff --git a/drivers/net/qlcnic/qlcnic_init.c b/drivers/net/qlcnic/qlcnic_init.c
index 9b9c7c39d3ee..a7f1d5b7e811 100644
--- a/drivers/net/qlcnic/qlcnic_init.c
+++ b/drivers/net/qlcnic/qlcnic_init.c
@@ -627,12 +627,73 @@ qlcnic_setup_idc_param(struct qlcnic_adapter *adapter) {
 	return 0;
 }
 
+static int qlcnic_get_flt_entry(struct qlcnic_adapter *adapter, u8 region,
+				struct qlcnic_flt_entry *region_entry)
+{
+	struct qlcnic_flt_header flt_hdr;
+	struct qlcnic_flt_entry *flt_entry;
+	int i = 0, ret;
+	u32 entry_size;
+
+	memset(region_entry, 0, sizeof(struct qlcnic_flt_entry));
+	ret = qlcnic_rom_fast_read_words(adapter, QLCNIC_FLT_LOCATION,
+					 (u8 *)&flt_hdr,
+					 sizeof(struct qlcnic_flt_header));
+	if (ret) {
+		dev_warn(&adapter->pdev->dev,
+			 "error reading flash layout header\n");
+		return -EIO;
+	}
+
+	entry_size = flt_hdr.len - sizeof(struct qlcnic_flt_header);
+	flt_entry = (struct qlcnic_flt_entry *)vzalloc(entry_size);
+	if (flt_entry == NULL) {
+		dev_warn(&adapter->pdev->dev, "error allocating memory\n");
+		return -EIO;
+	}
+
+	ret = qlcnic_rom_fast_read_words(adapter, QLCNIC_FLT_LOCATION +
+					 sizeof(struct qlcnic_flt_header),
+					 (u8 *)flt_entry, entry_size);
+	if (ret) {
+		dev_warn(&adapter->pdev->dev,
+			 "error reading flash layout entries\n");
+		goto err_out;
+	}
+
+	while (i < (entry_size/sizeof(struct qlcnic_flt_entry))) {
+		if (flt_entry[i].region == region)
+			break;
+		i++;
+	}
+	if (i >= (entry_size/sizeof(struct qlcnic_flt_entry))) {
+		dev_warn(&adapter->pdev->dev,
+			 "region=%x not found in %d regions\n", region, i);
+		ret = -EIO;
+		goto err_out;
+	}
+	memcpy(region_entry, &flt_entry[i], sizeof(struct qlcnic_flt_entry));
+
+err_out:
+	vfree(flt_entry);
+	return ret;
+}
+
 int
 qlcnic_check_flash_fw_ver(struct qlcnic_adapter *adapter)
 {
+	struct qlcnic_flt_entry fw_entry;
 	u32 ver = -1, min_ver;
+	int ret;
 
-	qlcnic_rom_fast_read(adapter, QLCNIC_FW_VERSION_OFFSET, (int *)&ver);
+	ret = qlcnic_get_flt_entry(adapter, QLCNIC_FW_IMAGE_REGION, &fw_entry);
+	if (!ret)
+		/* 0-4:-signature,  4-8:-fw version */
+		qlcnic_rom_fast_read(adapter, fw_entry.start_addr + 4,
+				     (int *)&ver);
+	else
+		qlcnic_rom_fast_read(adapter, QLCNIC_FW_VERSION_OFFSET,
+				     (int *)&ver);
 
 	ver = QLCNIC_DECODE_VERSION(ver);
 	min_ver = QLCNIC_MIN_FW_VERSION;
-- 
cgit v1.2.3


From 13b93ed924a82affd1e3a48f631cbb12c552199d Mon Sep 17 00:00:00 2001
From: Sony Chacko <sony.chacko@qlogic.com>
Date: Mon, 10 Jan 2011 00:15:22 +0000
Subject: qlcnic: fix ethtool diagnostics test

IRQ diag test was getting executed only when both register test
and link test passed. The test should get executed if ETH_TEST_FL_OFFLINE
flag is set.

Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlcnic/qlcnic_ethtool.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/qlcnic/qlcnic_ethtool.c b/drivers/net/qlcnic/qlcnic_ethtool.c
index 1e7af709d395..4c14510e2a87 100644
--- a/drivers/net/qlcnic/qlcnic_ethtool.c
+++ b/drivers/net/qlcnic/qlcnic_ethtool.c
@@ -672,7 +672,7 @@ qlcnic_diag_test(struct net_device *dev, struct ethtool_test *eth_test,
 	if (data[1])
 		eth_test->flags |= ETH_TEST_FL_FAILED;
 
-	if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
+	if (eth_test->flags & ETH_TEST_FL_OFFLINE) {
 		data[2] = qlcnic_irq_test(dev);
 		if (data[2])
 			eth_test->flags |= ETH_TEST_FL_FAILED;
-- 
cgit v1.2.3


From b11a25aaeccc29d5090d1ce9776af20e3ee99ab9 Mon Sep 17 00:00:00 2001
From: amit salecha <amit.salecha@qlogic.com>
Date: Mon, 10 Jan 2011 00:15:23 +0000
Subject: qlcnic: change module parameter permissions

o Updating module parameter after driver load is not supported
  except auto_fw_reset parameter. Changing these parameter after
  driver load, can have weird result.

o Update driver version to 5.0.15.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlcnic/qlcnic.h      |  4 ++--
 drivers/net/qlcnic/qlcnic_main.c | 10 +++++-----
 2 files changed, 7 insertions(+), 7 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/qlcnic/qlcnic.h b/drivers/net/qlcnic/qlcnic.h
index 14b6322aeee1..44e316fd67b8 100644
--- a/drivers/net/qlcnic/qlcnic.h
+++ b/drivers/net/qlcnic/qlcnic.h
@@ -34,8 +34,8 @@
 
 #define _QLCNIC_LINUX_MAJOR 5
 #define _QLCNIC_LINUX_MINOR 0
-#define _QLCNIC_LINUX_SUBVERSION 14
-#define QLCNIC_LINUX_VERSIONID  "5.0.14"
+#define _QLCNIC_LINUX_SUBVERSION 15
+#define QLCNIC_LINUX_VERSIONID  "5.0.15"
 #define QLCNIC_DRV_IDC_VER  0x01
 #define QLCNIC_DRIVER_VERSION  ((_QLCNIC_LINUX_MAJOR << 16) |\
 		 (_QLCNIC_LINUX_MINOR << 8) | (_QLCNIC_LINUX_SUBVERSION))
diff --git a/drivers/net/qlcnic/qlcnic_main.c b/drivers/net/qlcnic/qlcnic_main.c
index 11e3a46c0911..37c04b4fade3 100644
--- a/drivers/net/qlcnic/qlcnic_main.c
+++ b/drivers/net/qlcnic/qlcnic_main.c
@@ -31,15 +31,15 @@ static const char qlcnic_driver_string[] = "QLogic 1/10 GbE "
 
 static struct workqueue_struct *qlcnic_wq;
 static int qlcnic_mac_learn;
-module_param(qlcnic_mac_learn, int, 0644);
+module_param(qlcnic_mac_learn, int, 0444);
 MODULE_PARM_DESC(qlcnic_mac_learn, "Mac Filter (0=disabled, 1=enabled)");
 
 static int use_msi = 1;
-module_param(use_msi, int, 0644);
+module_param(use_msi, int, 0444);
 MODULE_PARM_DESC(use_msi, "MSI interrupt (0=disabled, 1=enabled");
 
 static int use_msi_x = 1;
-module_param(use_msi_x, int, 0644);
+module_param(use_msi_x, int, 0444);
 MODULE_PARM_DESC(use_msi_x, "MSI-X interrupt (0=disabled, 1=enabled");
 
 static int auto_fw_reset = AUTO_FW_RESET_ENABLED;
@@ -47,11 +47,11 @@ module_param(auto_fw_reset, int, 0644);
 MODULE_PARM_DESC(auto_fw_reset, "Auto firmware reset (0=disabled, 1=enabled");
 
 static int load_fw_file;
-module_param(load_fw_file, int, 0644);
+module_param(load_fw_file, int, 0444);
 MODULE_PARM_DESC(load_fw_file, "Load firmware from (0=flash, 1=file");
 
 static int qlcnic_config_npars;
-module_param(qlcnic_config_npars, int, 0644);
+module_param(qlcnic_config_npars, int, 0444);
 MODULE_PARM_DESC(qlcnic_config_npars, "Configure NPARs (0=disabled, 1=enabled");
 
 static int __devinit qlcnic_probe(struct pci_dev *pdev,
-- 
cgit v1.2.3


From 80ce3f67e75ffa14ad99b26457a7e9558b8b001a Mon Sep 17 00:00:00 2001
From: Casey Leedom <leedom@chelsio.com>
Date: Mon, 10 Jan 2011 13:53:43 -0800
Subject: cxgb4vf: fix mailbox data/control coherency domain race

For the VFs, the Mailbox Data "registers" are actually backed by
T4's "MA" interface rather than PL Registers (as is the case for
the PFs).  Because these are in different coherency domains, the
write to the VF's PL-register-backed Mailbox Control can race in
front of the writes to the MA-backed VF Mailbox Data "registers".
So we need to do a read-back on at least one byte of the VF Mailbox
Data registers before doing the write to the VF Mailbox Control
register.

Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/cxgb4vf/t4vf_hw.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

(limited to 'drivers')

diff --git a/drivers/net/cxgb4vf/t4vf_hw.c b/drivers/net/cxgb4vf/t4vf_hw.c
index e4bec78c8e3f..0f51c80475ce 100644
--- a/drivers/net/cxgb4vf/t4vf_hw.c
+++ b/drivers/net/cxgb4vf/t4vf_hw.c
@@ -147,9 +147,20 @@ int t4vf_wr_mbox_core(struct adapter *adapter, const void *cmd, int size,
 	/*
 	 * Write the command array into the Mailbox Data register array and
 	 * transfer ownership of the mailbox to the firmware.
+	 *
+	 * For the VFs, the Mailbox Data "registers" are actually backed by
+	 * T4's "MA" interface rather than PL Registers (as is the case for
+	 * the PFs).  Because these are in different coherency domains, the
+	 * write to the VF's PL-register-backed Mailbox Control can race in
+	 * front of the writes to the MA-backed VF Mailbox Data "registers".
+	 * So we need to do a read-back on at least one byte of the VF Mailbox
+	 * Data registers before doing the write to the VF Mailbox Control
+	 * register.
 	 */
 	for (i = 0, p = cmd; i < size; i += 8)
 		t4_write_reg64(adapter, mbox_data + i, be64_to_cpu(*p++));
+	t4_read_reg(adapter, mbox_data);         /* flush write */
+
 	t4_write_reg(adapter, mbox_ctl,
 		     MBMSGVALID | MBOWNER(MBOX_OWNER_FW));
 	t4_read_reg(adapter, mbox_ctl);          /* flush write */
-- 
cgit v1.2.3


From f1593d2298acca8b6680100d622911827edb8b0a Mon Sep 17 00:00:00 2001
From: Tom Herbert <therbert@google.com>
Date: Sun, 9 Jan 2011 19:36:36 +0000
Subject: mlx4: Call alloc_etherdev to allocate RX and TX queues

Changed driver to call alloc_etherdev_mqs so that the number of TX
and RX queues can be set to correct values in the netdev device.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/mlx4/en_netdev.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c
index 6d6806b361e3..897f576b8b17 100644
--- a/drivers/net/mlx4/en_netdev.c
+++ b/drivers/net/mlx4/en_netdev.c
@@ -972,7 +972,8 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 	int i;
 	int err;
 
-	dev = alloc_etherdev_mq(sizeof(struct mlx4_en_priv), prof->tx_ring_num);
+	dev = alloc_etherdev_mqs(sizeof(struct mlx4_en_priv),
+	    prof->tx_ring_num, prof->rx_ring_num);
 	if (dev == NULL) {
 		mlx4_err(mdev, "Net device allocation failed\n");
 		return -ENOMEM;
-- 
cgit v1.2.3


From 96545aeb7b4457594d764af4d689a738e97f14b8 Mon Sep 17 00:00:00 2001
From: Changli Gao <xiaosuo@gmail.com>
Date: Thu, 6 Jan 2011 13:37:36 +0000
Subject: net: ppp: use {get,put}_unaligned_be{16,32}

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Reviewed-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ppp_async.c   | 10 +++++-----
 drivers/net/ppp_deflate.c |  9 ++++-----
 drivers/net/ppp_generic.c |  9 ++++-----
 drivers/net/ppp_mppe.c    |  7 +++----
 drivers/net/ppp_synctty.c |  3 ++-
 5 files changed, 18 insertions(+), 20 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/ppp_async.c b/drivers/net/ppp_async.c
index 78d70a6481bf..a1b82c9c67d2 100644
--- a/drivers/net/ppp_async.c
+++ b/drivers/net/ppp_async.c
@@ -32,6 +32,7 @@
 #include <linux/init.h>
 #include <linux/jiffies.h>
 #include <linux/slab.h>
+#include <asm/unaligned.h>
 #include <asm/uaccess.h>
 #include <asm/string.h>
 
@@ -542,7 +543,7 @@ ppp_async_encode(struct asyncppp *ap)
 	data = ap->tpkt->data;
 	count = ap->tpkt->len;
 	fcs = ap->tfcs;
-	proto = (data[0] << 8) + data[1];
+	proto = get_unaligned_be16(data);
 
 	/*
 	 * LCP packets with code values between 1 (configure-reqest)
@@ -963,7 +964,7 @@ static void async_lcp_peek(struct asyncppp *ap, unsigned char *data,
 	code = data[0];
 	if (code != CONFACK && code != CONFREQ)
 		return;
-	dlen = (data[2] << 8) + data[3];
+	dlen = get_unaligned_be16(data + 2);
 	if (len < dlen)
 		return;		/* packet got truncated or length is bogus */
 
@@ -997,15 +998,14 @@ static void async_lcp_peek(struct asyncppp *ap, unsigned char *data,
 	while (dlen >= 2 && dlen >= data[1] && data[1] >= 2) {
 		switch (data[0]) {
 		case LCP_MRU:
-			val = (data[2] << 8) + data[3];
+			val = get_unaligned_be16(data + 2);
 			if (inbound)
 				ap->mru = val;
 			else
 				ap->chan.mtu = val;
 			break;
 		case LCP_ASYNCMAP:
-			val = (data[2] << 24) + (data[3] << 16)
-				+ (data[4] << 8) + data[5];
+			val = get_unaligned_be32(data + 2);
 			if (inbound)
 				ap->raccm = val;
 			else
diff --git a/drivers/net/ppp_deflate.c b/drivers/net/ppp_deflate.c
index 695bc83e0cfd..43583309a65d 100644
--- a/drivers/net/ppp_deflate.c
+++ b/drivers/net/ppp_deflate.c
@@ -41,6 +41,7 @@
 #include <linux/ppp-comp.h>
 
 #include <linux/zlib.h>
+#include <asm/unaligned.h>
 
 /*
  * State for a Deflate (de)compressor.
@@ -232,11 +233,9 @@ static int z_compress(void *arg, unsigned char *rptr, unsigned char *obuf,
 	 */
 	wptr[0] = PPP_ADDRESS(rptr);
 	wptr[1] = PPP_CONTROL(rptr);
-	wptr[2] = PPP_COMP >> 8;
-	wptr[3] = PPP_COMP;
+	put_unaligned_be16(PPP_COMP, wptr + 2);
 	wptr += PPP_HDRLEN;
-	wptr[0] = state->seqno >> 8;
-	wptr[1] = state->seqno;
+	put_unaligned_be16(state->seqno, wptr);
 	wptr += DEFLATE_OVHD;
 	olen = PPP_HDRLEN + DEFLATE_OVHD;
 	state->strm.next_out = wptr;
@@ -451,7 +450,7 @@ static int z_decompress(void *arg, unsigned char *ibuf, int isize,
 	}
 
 	/* Check the sequence number. */
-	seq = (ibuf[PPP_HDRLEN] << 8) + ibuf[PPP_HDRLEN+1];
+	seq = get_unaligned_be16(ibuf + PPP_HDRLEN);
 	if (seq != (state->seqno & 0xffff)) {
 		if (state->debug)
 			printk(KERN_DEBUG "z_decompress%d: bad seq # %d, expected %d\n",
diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index 6456484c0299..c7a6c4466978 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -46,6 +46,7 @@
 #include <linux/device.h>
 #include <linux/mutex.h>
 #include <linux/slab.h>
+#include <asm/unaligned.h>
 #include <net/slhc_vj.h>
 #include <asm/atomic.h>
 
@@ -210,7 +211,7 @@ struct ppp_net {
 };
 
 /* Get the PPP protocol number from a skb */
-#define PPP_PROTO(skb)	(((skb)->data[0] << 8) + (skb)->data[1])
+#define PPP_PROTO(skb)	get_unaligned_be16((skb)->data)
 
 /* We limit the length of ppp->file.rq to this (arbitrary) value */
 #define PPP_MAX_RQLEN	32
@@ -964,8 +965,7 @@ ppp_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	pp = skb_push(skb, 2);
 	proto = npindex_to_proto[npi];
-	pp[0] = proto >> 8;
-	pp[1] = proto;
+	put_unaligned_be16(proto, pp);
 
 	netif_stop_queue(dev);
 	skb_queue_tail(&ppp->file.xq, skb);
@@ -1473,8 +1473,7 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb)
 		q = skb_put(frag, flen + hdrlen);
 
 		/* make the MP header */
-		q[0] = PPP_MP >> 8;
-		q[1] = PPP_MP;
+		put_unaligned_be16(PPP_MP, q);
 		if (ppp->flags & SC_MP_XSHORTSEQ) {
 			q[2] = bits + ((ppp->nxseq >> 8) & 0xf);
 			q[3] = ppp->nxseq;
diff --git a/drivers/net/ppp_mppe.c b/drivers/net/ppp_mppe.c
index 6d1a1b80cc3e..9a1849a83e2a 100644
--- a/drivers/net/ppp_mppe.c
+++ b/drivers/net/ppp_mppe.c
@@ -55,6 +55,7 @@
 #include <linux/ppp_defs.h>
 #include <linux/ppp-comp.h>
 #include <linux/scatterlist.h>
+#include <asm/unaligned.h>
 
 #include "ppp_mppe.h"
 
@@ -395,16 +396,14 @@ mppe_compress(void *arg, unsigned char *ibuf, unsigned char *obuf,
 	 */
 	obuf[0] = PPP_ADDRESS(ibuf);
 	obuf[1] = PPP_CONTROL(ibuf);
-	obuf[2] = PPP_COMP >> 8;	/* isize + MPPE_OVHD + 1 */
-	obuf[3] = PPP_COMP;	/* isize + MPPE_OVHD + 2 */
+	put_unaligned_be16(PPP_COMP, obuf + 2);
 	obuf += PPP_HDRLEN;
 
 	state->ccount = (state->ccount + 1) % MPPE_CCOUNT_SPACE;
 	if (state->debug >= 7)
 		printk(KERN_DEBUG "mppe_compress[%d]: ccount %d\n", state->unit,
 		       state->ccount);
-	obuf[0] = state->ccount >> 8;
-	obuf[1] = state->ccount & 0xff;
+	put_unaligned_be16(state->ccount, obuf);
 
 	if (!state->stateful ||	/* stateless mode     */
 	    ((state->ccount & 0xff) == 0xff) ||	/* "flag" packet      */
diff --git a/drivers/net/ppp_synctty.c b/drivers/net/ppp_synctty.c
index 4c95ec3fb8d4..4e6b72f57de8 100644
--- a/drivers/net/ppp_synctty.c
+++ b/drivers/net/ppp_synctty.c
@@ -45,6 +45,7 @@
 #include <linux/completion.h>
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <asm/unaligned.h>
 #include <asm/uaccess.h>
 
 #define PPP_VERSION	"2.4.2"
@@ -563,7 +564,7 @@ ppp_sync_txmunge(struct syncppp *ap, struct sk_buff *skb)
 	int islcp;
 
 	data  = skb->data;
-	proto = (data[0] << 8) + data[1];
+	proto = get_unaligned_be16(data);
 
 	/* LCP packets with codes between 1 (configure-request)
 	 * and 7 (code-reject) must be sent as though no options
-- 
cgit v1.2.3


From 42b82dc19dfdcab931fb67175996a881ce254145 Mon Sep 17 00:00:00 2001
From: hayeswang <hayeswang@realtek.com>
Date: Mon, 10 Jan 2011 02:07:25 +0000
Subject: net/r8169: Update the function of parsing firmware

Update rtl_phy_write_fw function. The new function could
parse the complex firmware which is used by RTL8111E and later.
The new firmware may read data and do some operations, not just
do writing only.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/r8169.c | 122 ++++++++++++++++++++++++++++++++++++++++++++++------
 1 file changed, 110 insertions(+), 12 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index dd758cdb55c4..bb8645ab247c 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -1632,36 +1632,134 @@ rtl_phy_write_fw(struct rtl8169_private *tp, const struct firmware *fw)
 {
 	__le32 *phytable = (__le32 *)fw->data;
 	struct net_device *dev = tp->dev;
-	size_t i;
+	size_t index, fw_size = fw->size / sizeof(*phytable);
+	u32 predata, count;
 
 	if (fw->size % sizeof(*phytable)) {
 		netif_err(tp, probe, dev, "odd sized firmware %zd\n", fw->size);
 		return;
 	}
 
-	for (i = 0; i < fw->size / sizeof(*phytable); i++) {
-		u32 action = le32_to_cpu(phytable[i]);
+	for (index = 0; index < fw_size; index++) {
+		u32 action = le32_to_cpu(phytable[index]);
+		u32 regno = (action & 0x0fff0000) >> 16;
 
-		if (!action)
+		switch(action & 0xf0000000) {
+		case PHY_READ:
+		case PHY_DATA_OR:
+		case PHY_DATA_AND:
+		case PHY_READ_EFUSE:
+		case PHY_CLEAR_READCOUNT:
+		case PHY_WRITE:
+		case PHY_WRITE_PREVIOUS:
+		case PHY_DELAY_MS:
 			break;
 
-		if ((action & 0xf0000000) != PHY_WRITE) {
-			netif_err(tp, probe, dev,
-				  "unknown action 0x%08x\n", action);
+		case PHY_BJMPN:
+			if (regno > index) {
+				netif_err(tp, probe, tp->dev,
+					"Out of range of firmware\n");
+				return;
+			}
+			break;
+		case PHY_READCOUNT_EQ_SKIP:
+			if (index + 2 >= fw_size) {
+				netif_err(tp, probe, tp->dev,
+					"Out of range of firmware\n");
+				return;
+			}
+			break;
+		case PHY_COMP_EQ_SKIPN:
+		case PHY_COMP_NEQ_SKIPN:
+		case PHY_SKIPN:
+			if (index + 1 + regno >= fw_size) {
+				netif_err(tp, probe, tp->dev,
+					"Out of range of firmware\n");
+				return;
+			}
+			break;
+
+		case PHY_READ_MAC_BYTE:
+		case PHY_WRITE_MAC_BYTE:
+		case PHY_WRITE_ERI_WORD:
+		default:
+			netif_err(tp, probe, tp->dev,
+				  "Invalid action 0x%08x\n", action);
 			return;
 		}
 	}
 
-	while (i-- != 0) {
-		u32 action = le32_to_cpu(*phytable);
+	predata = 0;
+	count = 0;
+
+	for (index = 0; index < fw_size; ) {
+		u32 action = le32_to_cpu(phytable[index]);
 		u32 data = action & 0x0000ffff;
-		u32 reg = (action & 0x0fff0000) >> 16;
+		u32 regno = (action & 0x0fff0000) >> 16;
+
+		if (!action)
+			break;
 
 		switch(action & 0xf0000000) {
+		case PHY_READ:
+			predata = rtl_readphy(tp, regno);
+			count++;
+			index++;
+			break;
+		case PHY_DATA_OR:
+			predata |= data;
+			index++;
+			break;
+		case PHY_DATA_AND:
+			predata &= data;
+			index++;
+			break;
+		case PHY_BJMPN:
+			index -= regno;
+			break;
+		case PHY_READ_EFUSE:
+			predata = rtl8168d_efuse_read(tp->mmio_addr, regno);
+			index++;
+			break;
+		case PHY_CLEAR_READCOUNT:
+			count = 0;
+			index++;
+			break;
 		case PHY_WRITE:
-			rtl_writephy(tp, reg, data);
-			phytable++;
+			rtl_writephy(tp, regno, data);
+			index++;
+			break;
+		case PHY_READCOUNT_EQ_SKIP:
+			if (count == data)
+				index += 2;
+			else
+				index += 1;
+			break;
+		case PHY_COMP_EQ_SKIPN:
+			if (predata == data)
+				index += regno;
+			index++;
+			break;
+		case PHY_COMP_NEQ_SKIPN:
+			if (predata != data)
+				index += regno;
+			index++;
+			break;
+		case PHY_WRITE_PREVIOUS:
+			rtl_writephy(tp, regno, predata);
+			index++;
 			break;
+		case PHY_SKIPN:
+			index += regno + 1;
+			break;
+		case PHY_DELAY_MS:
+			mdelay(data);
+			index++;
+			break;
+
+		case PHY_READ_MAC_BYTE:
+		case PHY_WRITE_MAC_BYTE:
+		case PHY_WRITE_ERI_WORD:
 		default:
 			BUG();
 		}
-- 
cgit v1.2.3


From 0c302f57aba3ed638d71b66767e145ea5c14a353 Mon Sep 17 00:00:00 2001
From: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Date: Tue, 11 Jan 2011 01:55:58 +0000
Subject: pcnet_cs: add new_id

pcnet_cs:
     add another ID of "corega Ether CF-TD" 10Base-T PCMCIA card.

Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/pcmcia/pcnet_cs.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers')

diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 2c158910f7ea..e953793a33ff 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -1536,6 +1536,7 @@ static struct pcmcia_device_id pcnet_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("CONTEC", "C-NET(PC)C-10L", 0x21cab552, 0xf6f90722),
 	PCMCIA_DEVICE_PROD_ID12("corega", "FEther PCC-TXF", 0x0a21501a, 0xa51564a2),
 	PCMCIA_DEVICE_PROD_ID12("corega", "Ether CF-TD", 0x0a21501a, 0x6589340a),
+	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether CF-TD LAN Card", 0x5261440f, 0x8797663b),
 	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega EtherII PCC-T", 0x5261440f, 0xfa9d85bd),
 	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega EtherII PCC-TD", 0x5261440f, 0xc49bd73d),
 	PCMCIA_DEVICE_PROD_ID12("Corega K.K.", "corega EtherII PCC-TD", 0xd4fdcbd8, 0xc49bd73d),
-- 
cgit v1.2.3


From b5074087add883d015827e3792e4e388cc2d40c3 Mon Sep 17 00:00:00 2001
From: Shawn Guo <shawn.guo@freescale.com>
Date: Tue, 11 Jan 2011 02:07:52 +0000
Subject: net/fec: remove config FEC2 as it's used nowhere

Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/Kconfig | 8 --------
 1 file changed, 8 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 5780dad6a3cb..ff652c77a0a5 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1950,14 +1950,6 @@ config FEC
 	  Say Y here if you want to use the built-in 10/100 Fast ethernet
 	  controller on some Motorola ColdFire and Freescale i.MX processors.
 
-config FEC2
-	bool "Second FEC ethernet controller"
-	depends on FEC
-	help
-	  Say Y here if you want to use the second built-in 10/100 Fast
-	  ethernet controller on some Motorola ColdFire and Freescale
-	  i.MX processors.
-
 config FEC_MPC52xx
 	tristate "MPC52xx FEC driver"
 	depends on PPC_MPC52xx && PPC_BESTCOMM
-- 
cgit v1.2.3


From f76957fc8fc4fa9735f01e59653b2792b077de06 Mon Sep 17 00:00:00 2001
From: Breno Leitao <leitao@linux.vnet.ibm.com>
Date: Tue, 11 Jan 2011 07:45:57 +0000
Subject: ehea: Increase the skb array usage

Currently the skb array is not fully allocated, and the allocation
is done as it's requested, which is not the expected way.

This patch just allocate the full skb array at driver initialization.
Also, this patch increases ehea version to 107.

Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ehea/ehea.h      | 2 +-
 drivers/net/ehea/ehea_main.c | 6 ++----
 2 files changed, 3 insertions(+), 5 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h
index a724a2d14506..6c7257bd73fc 100644
--- a/drivers/net/ehea/ehea.h
+++ b/drivers/net/ehea/ehea.h
@@ -40,7 +40,7 @@
 #include <asm/io.h>
 
 #define DRV_NAME	"ehea"
-#define DRV_VERSION	"EHEA_0106"
+#define DRV_VERSION	"EHEA_0107"
 
 /* eHEA capability flags */
 #define DLPAR_PORT_ADD_REM 1
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index 1032b5bbe238..f75d3144b8a5 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -437,7 +437,7 @@ static void ehea_init_fill_rq1(struct ehea_port_res *pr, int nr_rq1a)
 		}
 	}
 	/* Ring doorbell */
-	ehea_update_rq1a(pr->qp, i);
+	ehea_update_rq1a(pr->qp, i - 1);
 }
 
 static int ehea_refill_rq_def(struct ehea_port_res *pr,
@@ -1329,9 +1329,7 @@ static int ehea_fill_port_res(struct ehea_port_res *pr)
 	int ret;
 	struct ehea_qp_init_attr *init_attr = &pr->qp->init_attr;
 
-	ehea_init_fill_rq1(pr, init_attr->act_nr_rwqes_rq1
-			       - init_attr->act_nr_rwqes_rq2
-			       - init_attr->act_nr_rwqes_rq3 - 1);
+	ehea_init_fill_rq1(pr, pr->rq1_skba.len);
 
 	ret = ehea_refill_rq2(pr, init_attr->act_nr_rwqes_rq2 - 1);
 
-- 
cgit v1.2.3


From 343a8d13aae58dec562dbb5c7d48a53e9b847871 Mon Sep 17 00:00:00 2001
From: Casey Leedom <leedom@chelsio.com>
Date: Tue, 11 Jan 2011 15:44:40 -0800
Subject: cxgb4vf: recover from failure in cxgb4vf_open()

If the Link Start fails in cxgb4vf_open(), we need to back out any state
that we've built up ...

Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/cxgb4vf/cxgb4vf_main.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

(limited to 'drivers')

diff --git a/drivers/net/cxgb4vf/cxgb4vf_main.c b/drivers/net/cxgb4vf/cxgb4vf_main.c
index 3c403f895750..56166ae2059f 100644
--- a/drivers/net/cxgb4vf/cxgb4vf_main.c
+++ b/drivers/net/cxgb4vf/cxgb4vf_main.c
@@ -749,13 +749,19 @@ static int cxgb4vf_open(struct net_device *dev)
 	netif_set_real_num_tx_queues(dev, pi->nqsets);
 	err = netif_set_real_num_rx_queues(dev, pi->nqsets);
 	if (err)
-		return err;
-	set_bit(pi->port_id, &adapter->open_device_map);
+		goto err_unwind;
 	err = link_start(dev);
 	if (err)
-		return err;
+		goto err_unwind;
+
 	netif_tx_start_all_queues(dev);
+	set_bit(pi->port_id, &adapter->open_device_map);
 	return 0;
+
+err_unwind:
+	if (adapter->open_device_map == 0)
+		adapter_down(adapter);
+	return err;
 }
 
 /*
@@ -764,13 +770,12 @@ static int cxgb4vf_open(struct net_device *dev)
  */
 static int cxgb4vf_stop(struct net_device *dev)
 {
-	int ret;
 	struct port_info *pi = netdev_priv(dev);
 	struct adapter *adapter = pi->adapter;
 
 	netif_tx_stop_all_queues(dev);
 	netif_carrier_off(dev);
-	ret = t4vf_enable_vi(adapter, pi->viid, false, false);
+	t4vf_enable_vi(adapter, pi->viid, false, false);
 	pi->link_cfg.link_ok = 0;
 
 	clear_bit(pi->port_id, &adapter->open_device_map);
-- 
cgit v1.2.3