From 863636828f1fcd9fdc15e24d620aa53cf18b432f Mon Sep 17 00:00:00 2001 From: Simon Guinot Date: Fri, 17 Sep 2010 23:33:51 +0200 Subject: dmaengine: fix interrupt clearing for mv_xor When using simultaneously the two DMA channels on a same engine, some transfers are never completed. For example, an endless lock can occur while writing heavily on a RAID5 array (with async-tx offload support enabled). Note that this issue can also be reproduced by using the DMA test client. On a same engine, the interrupt cause register is shared between two DMA channels. This patch make sure that the cause bit is only cleared for the requested channel. Signed-off-by: Simon Guinot Tested-by: Luc Saillard Acked-by: Saeed Bishara Signed-off-by: Nicolas Pitre --- drivers/dma/mv_xor.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c index 86c5ae9fde34..411d5bf50fc4 100644 --- a/drivers/dma/mv_xor.c +++ b/drivers/dma/mv_xor.c @@ -162,7 +162,7 @@ static int mv_is_err_intr(u32 intr_cause) static void mv_xor_device_clear_eoc_cause(struct mv_xor_chan *chan) { - u32 val = (1 << (1 + (chan->idx * 16))); + u32 val = ~(1 << (chan->idx * 16)); dev_dbg(chan->device->common.dev, "%s, val 0x%08x\n", __func__, val); __raw_writel(val, XOR_INTR_CAUSE(chan)); } -- cgit v1.2.3 From f539dfedbd169e5ed47912bb517c75976ab556f3 Mon Sep 17 00:00:00 2001 From: Simon Guinot Date: Sun, 19 Sep 2010 15:30:59 +0200 Subject: leds: leds-ns2: fix locking This patch replace all the lock functions with the irq safe variant. The ns2_led_{set,get}_mode() functions must be safe in all context. For example, the trigger timer call led_set_brightness() in a softirq context. Signed-off-by: Simon Guinot Signed-off-by: Nicolas Pitre --- drivers/leds/leds-ns2.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/leds/leds-ns2.c b/drivers/leds/leds-ns2.c index 74dce4ba0262..350eb34f049c 100644 --- a/drivers/leds/leds-ns2.c +++ b/drivers/leds/leds-ns2.c @@ -81,7 +81,7 @@ static int ns2_led_get_mode(struct ns2_led_data *led_dat, int cmd_level; int slow_level; - read_lock(&led_dat->rw_lock); + read_lock_irq(&led_dat->rw_lock); cmd_level = gpio_get_value(led_dat->cmd); slow_level = gpio_get_value(led_dat->slow); @@ -95,7 +95,7 @@ static int ns2_led_get_mode(struct ns2_led_data *led_dat, } } - read_unlock(&led_dat->rw_lock); + read_unlock_irq(&led_dat->rw_lock); return ret; } @@ -104,8 +104,9 @@ static void ns2_led_set_mode(struct ns2_led_data *led_dat, enum ns2_led_modes mode) { int i; + unsigned long flags; - write_lock(&led_dat->rw_lock); + write_lock_irqsave(&led_dat->rw_lock, flags); for (i = 0; i < ARRAY_SIZE(ns2_led_modval); i++) { if (mode == ns2_led_modval[i].mode) { @@ -116,7 +117,7 @@ static void ns2_led_set_mode(struct ns2_led_data *led_dat, } } - write_unlock(&led_dat->rw_lock); + write_unlock_irqrestore(&led_dat->rw_lock, flags); } static void ns2_led_set(struct led_classdev *led_cdev, -- cgit v1.2.3 From 07a5d146c80b7caa9e754b51f64d3fcbbc74e9c0 Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Wed, 8 Sep 2010 09:42:39 -0400 Subject: ARM: pxa168fb: clear enable bit when not active While fb isn't active, we should clear CFG_GRA_ENA bit. The existing code can't clear this bit. Signed-off-by: Haojian Zhuang Acked-by: Marek Vasut Signed-off-by: Eric Miao --- drivers/video/pxa168fb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/video/pxa168fb.c b/drivers/video/pxa168fb.c index 5d786bd3e304..a31a77ff6f3d 100644 --- a/drivers/video/pxa168fb.c +++ b/drivers/video/pxa168fb.c @@ -298,8 +298,8 @@ static void set_dma_control0(struct pxa168fb_info *fbi) * Set bit to enable graphics DMA. */ x = readl(fbi->reg_base + LCD_SPU_DMA_CTRL0); - x |= fbi->active ? 0x00000100 : 0; - fbi->active = 0; + x &= ~CFG_GRA_ENA_MASK; + x |= fbi->active ? CFG_GRA_ENA(1) : CFG_GRA_ENA(0); /* * If we are in a pseudo-color mode, we need to enable -- cgit v1.2.3