From 053bf34f5aff499d7b595c500bbab5cbab3636e7 Mon Sep 17 00:00:00 2001 From: Per Forlin Date: Mon, 7 Nov 2011 21:55:11 +0530 Subject: mmc: omap_hsmmc: DMA unmap only once in case of MMC error Reported by Russell King: mmcblk0: error -84 transferring data, sector 149201, nr 64, cmd response 0x900, card status 0xb00 mmcblk0: retrying using single block read WARNING: at lib/dma-debug.c:811 check_unmap omap_hsmmc omap_hsmmc.0: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x0000000080933000] [size=20480 bytes] In case of an error dma_unmap() is issued in omap_hsmmc_dma_cleanup() and then again in omap_hsmmc_post_req(). Resolve this by clearing the host_cookie to indicate there is no DMA mapped memory to unmap. Signed-off-by: Per Forlin Tested-by: Balaji T K Tested-by: Russell King Signed-off-by: Chris Ball --- drivers/mmc/host/omap_hsmmc.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 101cd31c8220..d5fe43d53c51 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -1010,6 +1010,7 @@ static void omap_hsmmc_dma_cleanup(struct omap_hsmmc_host *host, int errno) host->data->sg_len, omap_hsmmc_get_dma_dir(host, host->data)); omap_free_dma(dma_ch); + host->data->host_cookie = 0; } host->data = NULL; } @@ -1575,8 +1576,10 @@ static void omap_hsmmc_post_req(struct mmc_host *mmc, struct mmc_request *mrq, struct mmc_data *data = mrq->data; if (host->use_dma) { - dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len, - omap_hsmmc_get_dma_dir(host, data)); + if (data->host_cookie) + dma_unmap_sg(mmc_dev(host->mmc), data->sg, + data->sg_len, + omap_hsmmc_get_dma_dir(host, data)); data->host_cookie = 0; } } -- cgit v1.2.3 From e58f516ff4730c4047c3f104b061f7a03e9a263c Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 11 Nov 2011 16:28:05 +0100 Subject: mmc: mxcmmc: fix falling back to PIO When we can't configure the dma channel we want to fall back to PIO. We do this by setting host->do_dma to zero. This does not work as do_dma is used to see whether dma can be used for the current transfer. Instead, we have to set host->dma to NULL. Signed-off-by: Sascha Hauer Cc: Signed-off-by: Chris Ball --- drivers/mmc/host/mxcmmc.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c index 325ea61e12d3..8e0fbe994047 100644 --- a/drivers/mmc/host/mxcmmc.c +++ b/drivers/mmc/host/mxcmmc.c @@ -732,6 +732,7 @@ static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) "failed to config DMA channel. Falling back to PIO\n"); dma_release_channel(host->dma); host->do_dma = 0; + host->dma = NULL; } } -- cgit v1.2.3 From 7833c66b2d764a3c883c2f5cc60cd8a6266dae15 Mon Sep 17 00:00:00 2001 From: Chris Ball Date: Fri, 11 Nov 2011 19:54:53 -0500 Subject: mmc: Add module.h include to sdhci-cns3xxx.c Fixes: drivers/mmc/host/sdhci-cns3xxx.c:110: error: 'THIS_MODULE' undeclared here (not in a function) Reported-by: Al Viro Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-cns3xxx.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/mmc/host/sdhci-cns3xxx.c b/drivers/mmc/host/sdhci-cns3xxx.c index 4b920b7621cf..87b6f079b6e0 100644 --- a/drivers/mmc/host/sdhci-cns3xxx.c +++ b/drivers/mmc/host/sdhci-cns3xxx.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include "sdhci-pltfm.h" -- cgit v1.2.3 From 6de5fc9cf7de334912de4cfd2d06eb2d744d2afe Mon Sep 17 00:00:00 2001 From: Stefan Nilsson XK Date: Thu, 3 Nov 2011 09:44:12 +0100 Subject: mmc: core: Add quirk for long data read time Adds a quirk that sets the data read timeout to a fixed value instead of relying on the information in the CSD. The timeout value chosen is 300ms since that has proven enough for the problematic cards found, but could be increased if other cards require this. This patch also enables this quirk for certain Micron cards known to have this problem. Signed-off-by: Stefan Nilsson XK Signed-off-by: Ulf Hansson Acked-by: Linus Walleij Cc: Signed-off-by: Chris Ball --- drivers/mmc/card/block.c | 8 ++++++++ drivers/mmc/core/core.c | 12 ++++++++++++ 2 files changed, 20 insertions(+) (limited to 'drivers') diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index a1cb21f95302..1e0e27cbe987 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -1606,6 +1606,14 @@ static const struct mmc_fixup blk_fixups[] = MMC_QUIRK_BLK_NO_CMD23), MMC_FIXUP("MMC32G", 0x11, CID_OEMID_ANY, add_quirk_mmc, MMC_QUIRK_BLK_NO_CMD23), + + /* + * Some Micron MMC cards needs longer data read timeout than + * indicated in CSD. + */ + MMC_FIXUP(CID_NAME_ANY, 0x13, 0x200, add_quirk_mmc, + MMC_QUIRK_LONG_READ_TIME), + END_FIXUP }; diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 5278ffb20e74..74a012ad2bab 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -529,6 +529,18 @@ void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card) data->timeout_clks = 0; } } + + /* + * Some cards require longer data read timeout than indicated in CSD. + * Address this by setting the read timeout to a "reasonably high" + * value. For the cards tested, 300ms has proven enough. If necessary, + * this value can be increased if other problematic cards require this. + */ + if (mmc_card_long_read_time(card) && data->flags & MMC_DATA_READ) { + data->timeout_ns = 300000000; + data->timeout_clks = 0; + } + /* * Some cards need very high timeouts if driven in SPI mode. * The worst observed timeout was 900ms after writing a -- cgit v1.2.3 From 96a85d548bf960ec8e8a0c3bca2b2e88e41549db Mon Sep 17 00:00:00 2001 From: Girish K S Date: Fri, 4 Nov 2011 16:22:47 +0530 Subject: mmc: core: Fix setting power notify state variable for non-eMMC This patch skips the setting of the power notify state variable for non eMMC 4.5 devices. Also fixes the problem of omap_hsmmc noisy/broken for suspend resume reported by Kevin Hilman. Signed-off-by: Girish K S Acked-by: Ulf Hansson Signed-off-by: Chris Ball --- drivers/mmc/core/mmc.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index dbf421a6279c..90de9ba36d2f 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -883,10 +883,14 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, card->ext_csd.generic_cmd6_time); if (err && err != -EBADMSG) goto free_card; - } - if (!err) - card->poweroff_notify_state = MMC_POWERED_ON; + /* + * The err can be -EBADMSG or 0, + * so check for success and update the flag + */ + if (!err) + card->poweroff_notify_state = MMC_POWERED_ON; + } /* * Activate high speed (if supported) -- cgit v1.2.3 From a80f16276388a177199204aa5b60f328d4464110 Mon Sep 17 00:00:00 2001 From: Girish K S Date: Tue, 15 Nov 2011 11:55:46 +0530 Subject: mmc: core: Fix power_off_notify during suspend The eMMC 4.5 devices respond to only RESET and AWAKE command in the sleep state. Hence the mmc switch command to notify power off state should be sent before the device enters sleep state. This patch fixes the same. Signed-off-by: Girish K S Signed-off-by: Chris Ball --- drivers/mmc/core/core.c | 81 ++++++++++++++++++++++++++++++------------------- drivers/mmc/core/mmc.c | 2 +- 2 files changed, 50 insertions(+), 33 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 74a012ad2bab..7ee2e07f36f4 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -1225,6 +1225,46 @@ void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type) mmc_host_clk_release(host); } +static void mmc_poweroff_notify(struct mmc_host *host) +{ + struct mmc_card *card; + unsigned int timeout; + unsigned int notify_type = EXT_CSD_NO_POWER_NOTIFICATION; + int err = 0; + + card = host->card; + + /* + * Send power notify command only if card + * is mmc and notify state is powered ON + */ + if (card && mmc_card_mmc(card) && + (card->poweroff_notify_state == MMC_POWERED_ON)) { + + if (host->power_notify_type == MMC_HOST_PW_NOTIFY_SHORT) { + notify_type = EXT_CSD_POWER_OFF_SHORT; + timeout = card->ext_csd.generic_cmd6_time; + card->poweroff_notify_state = MMC_POWEROFF_SHORT; + } else { + notify_type = EXT_CSD_POWER_OFF_LONG; + timeout = card->ext_csd.power_off_longtime; + card->poweroff_notify_state = MMC_POWEROFF_LONG; + } + + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_POWER_OFF_NOTIFICATION, + notify_type, timeout); + + if (err && err != -EBADMSG) + pr_err("Device failed to respond within %d poweroff " + "time. Forcefully powering down the device\n", + timeout); + + /* Set the card state to no notification after the poweroff */ + card->poweroff_notify_state = MMC_NO_POWER_NOTIFICATION; + } +} + /* * Apply power to the MMC stack. This is a two-stage process. * First, we enable power to the card without the clock running. @@ -1281,42 +1321,12 @@ static void mmc_power_up(struct mmc_host *host) void mmc_power_off(struct mmc_host *host) { - struct mmc_card *card; - unsigned int notify_type; - unsigned int timeout; - int err; - mmc_host_clk_hold(host); - card = host->card; host->ios.clock = 0; host->ios.vdd = 0; - if (card && mmc_card_mmc(card) && - (card->poweroff_notify_state == MMC_POWERED_ON)) { - - if (host->power_notify_type == MMC_HOST_PW_NOTIFY_SHORT) { - notify_type = EXT_CSD_POWER_OFF_SHORT; - timeout = card->ext_csd.generic_cmd6_time; - card->poweroff_notify_state = MMC_POWEROFF_SHORT; - } else { - notify_type = EXT_CSD_POWER_OFF_LONG; - timeout = card->ext_csd.power_off_longtime; - card->poweroff_notify_state = MMC_POWEROFF_LONG; - } - - err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_POWER_OFF_NOTIFICATION, - notify_type, timeout); - - if (err && err != -EBADMSG) - pr_err("Device failed to respond within %d poweroff " - "time. Forcefully powering down the device\n", - timeout); - - /* Set the card state to no notification after the poweroff */ - card->poweroff_notify_state = MMC_NO_POWER_NOTIFICATION; - } + mmc_poweroff_notify(host); /* * Reset ocr mask to be the highest possible voltage supported for @@ -2314,8 +2324,15 @@ int mmc_suspend_host(struct mmc_host *host) * pre-claim the host. */ if (mmc_try_claim_host(host)) { - if (host->bus_ops->suspend) + if (host->bus_ops->suspend) { + /* + * For eMMC 4.5 device send notify command + * before sleep, because in sleep state eMMC 4.5 + * devices respond to only RESET and AWAKE cmd + */ + mmc_poweroff_notify(host); err = host->bus_ops->suspend(host); + } if (err == -ENOSYS || !host->bus_ops->resume) { /* * We simply "remove" the card in this case. diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 90de9ba36d2f..d240427c1246 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -876,7 +876,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, * set the notification byte in the ext_csd register of device */ if ((host->caps2 & MMC_CAP2_POWEROFF_NOTIFY) && - (card->poweroff_notify_state == MMC_NO_POWER_NOTIFICATION)) { + (card->ext_csd.rev >= 6)) { err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_POWER_OFF_NOTIFICATION, EXT_CSD_POWER_ON, -- cgit v1.2.3 From c99872a16fa7642987f30c750dc166674b0d8060 Mon Sep 17 00:00:00 2001 From: Kyungmin Park Date: Thu, 17 Nov 2011 13:34:33 +0900 Subject: mmc: core: Fix typo at mmc_card_sleep Fix wrong bus_ops->sleep check. (This isn't expected to have real-world consequences, because the mmc core always defines both 'awake' and 'sleep' ops.) Signed-off-by: Kyungmin Park Signed-off-by: Chris Ball --- drivers/mmc/core/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 7ee2e07f36f4..271efeac860b 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -2218,7 +2218,7 @@ int mmc_card_sleep(struct mmc_host *host) mmc_bus_get(host); - if (host->bus_ops && !host->bus_dead && host->bus_ops->awake) + if (host->bus_ops && !host->bus_dead && host->bus_ops->sleep) err = host->bus_ops->sleep(host); mmc_bus_put(host); -- cgit v1.2.3 From f6bc41fb08cbd6943df358437e0af90c91a3caa3 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 16 Nov 2011 10:10:41 +0100 Subject: mmc: sh_mmcif: fix clock gating on platforms with a .down_pwr() method Do not power down the card in .set_ios(), unless MMC_POWER_OFF is requested. This fixes the MMCIF interface functionality on ecovec boards. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Chris Ball --- drivers/mmc/host/sh_mmcif.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c index 369366c8e205..d5505f3fe2a1 100644 --- a/drivers/mmc/host/sh_mmcif.c +++ b/drivers/mmc/host/sh_mmcif.c @@ -908,7 +908,7 @@ static void sh_mmcif_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) if (host->power) { pm_runtime_put(&host->pd->dev); host->power = false; - if (p->down_pwr) + if (p->down_pwr && ios->power_mode == MMC_POWER_OFF) p->down_pwr(host->pd); } host->state = STATE_IDLE; -- cgit v1.2.3 From f6b8b52c68f6109db4be02b55660258ff503fc3b Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 16 Nov 2011 10:11:45 +0100 Subject: mmc: tmio: fix clock gating on platforms with a .set_pwr() method Do not power down the card in .set_ios(), unless MMC_POWER_OFF is requested. This fixes the SDHI functionality on ecovec. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Chris Ball --- drivers/mmc/host/tmio_mmc_pio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c index d85a60cda167..4208b3958069 100644 --- a/drivers/mmc/host/tmio_mmc_pio.c +++ b/drivers/mmc/host/tmio_mmc_pio.c @@ -798,7 +798,7 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) /* start bus clock */ tmio_mmc_clk_start(host); } else if (ios->power_mode != MMC_POWER_UP) { - if (host->set_pwr) + if (host->set_pwr && ios->power_mode == MMC_POWER_OFF) host->set_pwr(host->pdev, 0); if ((pdata->flags & TMIO_MMC_HAS_COLD_CD) && pdata->power) { -- cgit v1.2.3 From 524bfca2b42a7c9dc43af13e1592b21dd1ce3fcc Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 21 Nov 2011 18:00:51 +0000 Subject: mmc: sdhci-s3c: Remove old and misprototyped suspend operations Now that the driver is using dev_pm_ops the suspend operations in the platform_driver structure won't get called so don't need to be there, and certainly shouldn't be the same function as dev_pm_ops since the signatures are different. Signed-off-by: Mark Brown Acked-by: Jaehoon Chung Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-s3c.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c index 3d00e722efc9..cb60c4197e0a 100644 --- a/drivers/mmc/host/sdhci-s3c.c +++ b/drivers/mmc/host/sdhci-s3c.c @@ -644,8 +644,6 @@ static int sdhci_s3c_resume(struct platform_device *dev) static struct platform_driver sdhci_s3c_driver = { .probe = sdhci_s3c_probe, .remove = __devexit_p(sdhci_s3c_remove), - .suspend = sdhci_s3c_suspend, - .resume = sdhci_s3c_resume, .driver = { .owner = THIS_MODULE, .name = "s3c-sdhci", -- cgit v1.2.3 From 49df78074963c97e25debc3c67b72f059111607d Mon Sep 17 00:00:00 2001 From: Sujit Reddy Thumma Date: Wed, 23 Nov 2011 08:43:18 +0530 Subject: mmc: core: Fix deadlock when the CONFIG_MMC_UNSAFE_RESUME is not defined mmc_suspend_host() tries to claim host during suspend and release it only when the bus suspend operation is compeleted. If CONFIG_MMC_UNSAFE_RESUME is defined and the host is flagged as removable, mmc_suspend_host() tries to remove the card. In this process, the file system sync can get blocked trying to acquire host which is already claimed by mmc_suspend_host() causing deadlock. Fix this deadlock by releasing host before ->remove() is called. Signed-off-by: Sujit Reddy Thumma Acked-by: Ulf Hansson Acked-by: Linus Walleij Signed-off-by: Chris Ball --- drivers/mmc/core/core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 271efeac860b..950b97d7412a 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -2333,6 +2333,8 @@ int mmc_suspend_host(struct mmc_host *host) mmc_poweroff_notify(host); err = host->bus_ops->suspend(host); } + mmc_do_release_host(host); + if (err == -ENOSYS || !host->bus_ops->resume) { /* * We simply "remove" the card in this case. @@ -2347,7 +2349,6 @@ int mmc_suspend_host(struct mmc_host *host) host->pm_flags = 0; err = 0; } - mmc_do_release_host(host); } else { err = -EBUSY; } -- cgit v1.2.3