From 68ed7e1c3d236e9e1e60ed6cae22f2c1c4ba2952 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Fri, 2 Jan 2015 10:05:13 -0800 Subject: serial: fix parisc boot hang This is a partial revert of 2f2dafe (serial: serial_core.c: printk replacement) which gets us booting again. The real problem seems to be the _emit path in early boot. However, until we can root cause it, we need at least to get boot working. Fixes: 2f2dafe77df2c78e189a9fa6b1879dffd06ae5a1 Cc: stable@vger.kernel.org Signed-off-by: James Bottomley Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/serial_core.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 57ca61b14670..984605bb5bf1 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -2164,7 +2164,9 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port) break; } - dev_info(port->dev, "%s%d at %s (irq = %d, base_baud = %d) is a %s\n", + printk(KERN_INFO "%s%s%s%d at %s (irq = %d, base_baud = %d) is a %s\n", + port->dev ? dev_name(port->dev) : "", + port->dev ? ": " : "", drv->dev_name, drv->tty_driver->name_base + port->line, address, port->irq, port->uartclk / 16, uart_type(port)); -- cgit v1.2.3 From 72a3c0e4e6624a77ee6eee0903f209185fe20647 Mon Sep 17 00:00:00 2001 From: Sergej Pupykin Date: Tue, 30 Dec 2014 16:16:50 +0300 Subject: tty: Add support for the WCH384 4S multi-IO card WCH384 4S board is a PCI-E card with 4 DB9 COM ports detected as Serial controller: Device 1c00:3470 (rev 10) (prog-if 05 [16850]) Signed-off-by: Sergej Pupykin Acked-by: Zany Yan Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_pci.c | 29 ++++++++++++++++++++++++++--- 1 file changed, 26 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 31feeb2d0a66..d1f8dc6aabcb 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1815,7 +1815,7 @@ pci_wch_ch353_setup(struct serial_private *priv, } static int -pci_wch_ch382_setup(struct serial_private *priv, +pci_wch_ch38x_setup(struct serial_private *priv, const struct pciserial_board *board, struct uart_8250_port *port, int idx) { @@ -1880,6 +1880,7 @@ pci_wch_ch382_setup(struct serial_private *priv, #define PCIE_VENDOR_ID_WCH 0x1c00 #define PCIE_DEVICE_ID_WCH_CH382_2S1P 0x3250 +#define PCIE_DEVICE_ID_WCH_CH384_4S 0x3470 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */ #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584 @@ -2571,13 +2572,21 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .setup = pci_wch_ch353_setup, }, - /* WCH CH382 2S1P card (16750 clone) */ + /* WCH CH382 2S1P card (16850 clone) */ { .vendor = PCIE_VENDOR_ID_WCH, .device = PCIE_DEVICE_ID_WCH_CH382_2S1P, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, - .setup = pci_wch_ch382_setup, + .setup = pci_wch_ch38x_setup, + }, + /* WCH CH384 4S card (16850 clone) */ + { + .vendor = PCIE_VENDOR_ID_WCH, + .device = PCIE_DEVICE_ID_WCH_CH384_4S, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_wch_ch38x_setup, }, /* * ASIX devices with FIFO bug @@ -2876,6 +2885,7 @@ enum pci_board_num_t { pbn_fintek_4, pbn_fintek_8, pbn_fintek_12, + pbn_wch384_4, }; /* @@ -3675,6 +3685,14 @@ static struct pciserial_board pci_boards[] = { .base_baud = 115200, .first_offset = 0x40, }, + + [pbn_wch384_4] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + .first_offset = 0xC0, + }, }; static const struct pci_device_id blacklist[] = { @@ -3687,6 +3705,7 @@ static const struct pci_device_id blacklist[] = { { PCI_DEVICE(0x4348, 0x7053), }, /* WCH CH353 2S1P */ { PCI_DEVICE(0x4348, 0x5053), }, /* WCH CH353 1S1P */ { PCI_DEVICE(0x1c00, 0x3250), }, /* WCH CH382 2S1P */ + { PCI_DEVICE(0x1c00, 0x3470), }, /* WCH CH384 4S */ }; /* @@ -5400,6 +5419,10 @@ static struct pci_device_id serial_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_bt_2_115200 }, + { PCIE_VENDOR_ID_WCH, PCIE_DEVICE_ID_WCH_CH384_4S, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, pbn_wch384_4 }, + /* * Commtech, Inc. Fastcom adapters */ -- cgit v1.2.3 From 86f2c00f1d8e344965cf8df8572ed5f682956995 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Tue, 30 Dec 2014 10:39:25 -0500 Subject: tty: Prevent hw state corruption in exclusive mode reopen Exclusive mode ttys (TTY_EXCLUSIVE) do not allow further reopens; fail the condition before associating the file pointer and calling the driver open() method. Prevents DTR programming when the tty is already in exclusive mode. Reported-by: Shreyas Bethur Signed-off-by: Peter Hurley Acked-by: Shreyas Bethur Signed-off-by: Greg Kroah-Hartman --- drivers/tty/tty_io.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 4f35b43e2475..51f066aa375e 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -1464,6 +1464,9 @@ static int tty_reopen(struct tty_struct *tty) driver->subtype == PTY_TYPE_MASTER) return -EIO; + if (test_bit(TTY_EXCLUSIVE, &tty->flags) && !capable(CAP_SYS_ADMIN)) + return -EBUSY; + tty->count++; WARN_ON(!tty->ldisc); @@ -2106,10 +2109,6 @@ retry_open: retval = -ENODEV; filp->f_flags = saved_flags; - if (!retval && test_bit(TTY_EXCLUSIVE, &tty->flags) && - !capable(CAP_SYS_ADMIN)) - retval = -EBUSY; - if (retval) { #ifdef TTY_DEBUG_HANGUP printk(KERN_DEBUG "%s: error %d in opening %s...\n", __func__, -- cgit v1.2.3 From 2ce3c10c0c3e0d418c1a7a4c838319ba42c75388 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Tue, 30 Dec 2014 07:17:09 -0500 Subject: Revert "tty: Fix pty master poll() after slave closes v2" This reverts commit c4dc304677e8d566572c4738d95c48be150c6606. This fix is superseded by commit 52bce7f8d4fc633c9a9d0646eef58ba6ae9a3b73, 'pty, n_tty: Simplify input processing on final close'. The final close now waits for input processing to complete before destroying the pty, so poll() does not need to special case this condition. Cc: Francesco Ruggeri Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_tty.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index d2b496750d59..4ddfa60c9222 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -2399,17 +2399,12 @@ static unsigned int n_tty_poll(struct tty_struct *tty, struct file *file, poll_wait(file, &tty->read_wait, wait); poll_wait(file, &tty->write_wait, wait); - if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) - mask |= POLLHUP; if (input_available_p(tty, 1)) mask |= POLLIN | POLLRDNORM; - else if (mask & POLLHUP) { - tty_flush_to_ldisc(tty); - if (input_available_p(tty, 1)) - mask |= POLLIN | POLLRDNORM; - } if (tty->packet && tty->link->ctrl_status) mask |= POLLPRI | POLLIN | POLLRDNORM; + if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) + mask |= POLLHUP; if (tty_hung_up_p(file)) mask |= POLLHUP; if (!(mask & (POLLHUP | POLLIN | POLLRDNORM))) { -- cgit v1.2.3 From 31ec77aca72ee5920ed3ec3d047734dc0bc43342 Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Tue, 2 Dec 2014 17:49:54 +0900 Subject: serial: samsung: Add the support for Exynos5433 SoC This patch adds new s3c24xx_serial_drv_data structure for Exynos5433 SoC because Exynos5433 has different fifo size from existing Exynos4 SoC. Cc: Greg Kroah-Hartman Cc: Jiri Slaby Cc: linux-serial@vger.kernel.org Signed-off-by: Chanwoo Choi Acked-by: Inki Dae Acked-by: Geunsik Lim Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/samsung.c | 56 ++++++++++++++++++++++++++++---------------- 1 file changed, 36 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index 19273e31d224..107e80722575 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -1757,32 +1757,43 @@ static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = { #endif #if defined(CONFIG_ARCH_EXYNOS) +#define EXYNOS_COMMON_SERIAL_DRV_DATA \ + .info = &(struct s3c24xx_uart_info) { \ + .name = "Samsung Exynos UART", \ + .type = PORT_S3C6400, \ + .has_divslot = 1, \ + .rx_fifomask = S5PV210_UFSTAT_RXMASK, \ + .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, \ + .rx_fifofull = S5PV210_UFSTAT_RXFULL, \ + .tx_fifofull = S5PV210_UFSTAT_TXFULL, \ + .tx_fifomask = S5PV210_UFSTAT_TXMASK, \ + .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, \ + .def_clk_sel = S3C2410_UCON_CLKSEL0, \ + .num_clks = 1, \ + .clksel_mask = 0, \ + .clksel_shift = 0, \ + }, \ + .def_cfg = &(struct s3c2410_uartcfg) { \ + .ucon = S5PV210_UCON_DEFAULT, \ + .ufcon = S5PV210_UFCON_DEFAULT, \ + .has_fracval = 1, \ + } \ + static struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = { - .info = &(struct s3c24xx_uart_info) { - .name = "Samsung Exynos4 UART", - .type = PORT_S3C6400, - .has_divslot = 1, - .rx_fifomask = S5PV210_UFSTAT_RXMASK, - .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, - .rx_fifofull = S5PV210_UFSTAT_RXFULL, - .tx_fifofull = S5PV210_UFSTAT_TXFULL, - .tx_fifomask = S5PV210_UFSTAT_TXMASK, - .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, - .def_clk_sel = S3C2410_UCON_CLKSEL0, - .num_clks = 1, - .clksel_mask = 0, - .clksel_shift = 0, - }, - .def_cfg = &(struct s3c2410_uartcfg) { - .ucon = S5PV210_UCON_DEFAULT, - .ufcon = S5PV210_UFCON_DEFAULT, - .has_fracval = 1, - }, + EXYNOS_COMMON_SERIAL_DRV_DATA, .fifosize = { 256, 64, 16, 16 }, }; + +static struct s3c24xx_serial_drv_data exynos5433_serial_drv_data = { + EXYNOS_COMMON_SERIAL_DRV_DATA, + .fifosize = { 64, 256, 16, 256 }, +}; + #define EXYNOS4210_SERIAL_DRV_DATA ((kernel_ulong_t)&exynos4210_serial_drv_data) +#define EXYNOS5433_SERIAL_DRV_DATA ((kernel_ulong_t)&exynos5433_serial_drv_data) #else #define EXYNOS4210_SERIAL_DRV_DATA (kernel_ulong_t)NULL +#define EXYNOS5433_SERIAL_DRV_DATA (kernel_ulong_t)NULL #endif static struct platform_device_id s3c24xx_serial_driver_ids[] = { @@ -1804,6 +1815,9 @@ static struct platform_device_id s3c24xx_serial_driver_ids[] = { }, { .name = "exynos4210-uart", .driver_data = EXYNOS4210_SERIAL_DRV_DATA, + }, { + .name = "exynos5433-uart", + .driver_data = EXYNOS5433_SERIAL_DRV_DATA, }, { }, }; @@ -1823,6 +1837,8 @@ static const struct of_device_id s3c24xx_uart_dt_match[] = { .data = (void *)S5PV210_SERIAL_DRV_DATA }, { .compatible = "samsung,exynos4210-uart", .data = (void *)EXYNOS4210_SERIAL_DRV_DATA }, + { .compatible = "samsung,exynos5433-uart", + .data = (void *)EXYNOS5433_SERIAL_DRV_DATA }, {}, }; MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match); -- cgit v1.2.3