From 891f3ac4478238d6ff890a3bd5c8536e7ef91d5e Mon Sep 17 00:00:00 2001 From: Chanho Min Date: Sat, 30 Aug 2014 12:40:40 +0900 Subject: mmc: sdhci: handle busy-end interrupt during command It is fully legal for a controller to start handling busy-end interrupt before it has signaled that the command has completed. So make sure we do things in the proper order, Or it results that command interrupt is ignored so it can cause unexpected operations. This is founded at some toshiba emmc with the bellow warning. "mmc0: Got command interrupt 0x00000001 even though no command operation was in progress." This issue has been also reported by Youssef TRIKI: It is not specific to Toshiba devices, and happens with eMMC devices as well as SD card which support Auto-CMD12 rather than CMD23. Also, similar patch is submitted by: Gwendal Grignou Changes since v1: Fixed conflict with the next of git.linaro.org/people/ulf.hansson/mmc.git and Tested if issue is fixed again. Signed-off-by: Hankyung Yu Signed-off-by: Chanho Min Tested-by: Youssef TRIKI Signed-off-by: Ulf Hansson (cherry picked from commit e99783a45220a2c5f5a598e0e81213ecf2dbcf2f) --- drivers/mmc/host/sdhci.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 59d6b719b0aa..1aed27869b3c 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -989,6 +989,7 @@ static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) mod_timer(&host->timer, jiffies + 10 * HZ); host->cmd = cmd; + host->busy_handle = 0; sdhci_prepare_data(host, cmd); @@ -2150,8 +2151,12 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask) if (host->cmd->data) DBG("Cannot wait for busy signal when also " "doing a data transfer"); - else if (!(host->quirks & SDHCI_QUIRK_NO_BUSY_IRQ)) + else if (!(host->quirks & SDHCI_QUIRK_NO_BUSY_IRQ) + && !host->busy_handle) { + /* Mark that command complete before busy is ended */ + host->busy_handle = 1; return; + } /* The controller does not support the end-of-busy IRQ, * fall through and take the SDHCI_INT_RESPONSE */ @@ -2217,7 +2222,15 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask) return; } if (intmask & SDHCI_INT_DATA_END) { - sdhci_finish_command(host); + /* + * Some cards handle busy-end interrupt + * before the command completed, so make + * sure we do things in the proper order. + */ + if (host->busy_handle) + sdhci_finish_command(host); + else + host->busy_handle = 1; return; } } -- cgit v1.2.3