From d3645d39ad0ed9f09535065676ea0ba114f93cdf Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Fri, 13 Apr 2012 06:34:27 -0600 Subject: ARM: OMAP1: OHCI: use platform_data fn ptr to enable OCPI bus The OMAP1 OHCI driver needs to enable the OCPI IP block before it can work. Previously, the driver was simply calling a symbol defined in the OMAP platform code, but this is incorrect: drivers should be fully decoupled from platform and architecture code. So instead, modify the driver to call through a platform_data function pointer instead. We skip any DT aspect, since OMAP1 is not scheduled to be converted to DT in the near future. This resolves the following sparse warning: It also gets rid of a cpu_is_omap16xx() call in a driver. In the long term, it probably makes sense to move the OCPI bus code to somewhere under drivers/. This should avoid the whole platform_data/DT issue with this function. Signed-off-by: Paul Walmsley Cc: Felipe Balbi Cc: Anand Gadiyar Acked-by: Felipe Balbi --- drivers/usb/host/ohci-omap.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index 96451e41ee8a..71229cb97e3e 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -205,8 +205,9 @@ static int ohci_omap_init(struct usb_hcd *hcd) need_transceiver = need_transceiver || machine_is_omap_h2() || machine_is_omap_h3(); - if (cpu_is_omap16xx()) - ocpi_enable(); + /* XXX OMAP16xx only */ + if (config->ocpi_enable) + config->ocpi_enable(); #ifdef CONFIG_USB_OTG if (need_transceiver) { -- cgit v1.2.3 From 938f970eb23d40dba49d7b14b774ed7ae7ec974a Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Thu, 15 Mar 2012 14:38:09 +0100 Subject: rtc: Kconfig: remove dependency for AT91 rtc driver This will allow to select this driver for newer SoCs. Keep dependency on AT91 because of the use of an header file located in include/mach directory. Signed-off-by: Nicolas Ferre --- drivers/rtc/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 8c8377d50c4c..4161bfe462cd 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -838,7 +838,7 @@ config RTC_DRV_AT32AP700X config RTC_DRV_AT91RM9200 tristate "AT91RM9200 or some AT91SAM9 RTC" - depends on ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 + depends on ARCH_AT91 help Driver for the internal RTC (Realtime Clock) module found on Atmel AT91RM9200's and some AT91SAM9 chips. On AT91SAM9 chips -- cgit v1.2.3 From 1fc4ec3791729db4e2602e9afb1045aef1bc3a58 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Thu, 15 Mar 2012 16:02:02 +0100 Subject: Input: Kconfig: remove dependency for atmel_tsadcc driver This will allow to select this driver for newer SoCs. Keep dependency on AT91 because of the use of an header file located in include/mach directory. Signed-off-by: Nicolas Ferre Acked-by: Dmitry Torokhov --- drivers/input/touchscreen/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 2a2141915aa0..75838d7710ce 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -489,10 +489,10 @@ config TOUCHSCREEN_TI_TSCADC config TOUCHSCREEN_ATMEL_TSADCC tristate "Atmel Touchscreen Interface" - depends on ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 + depends on ARCH_AT91 help Say Y here if you have a 4-wire touchscreen connected to the - ADC Controller on your Atmel SoC (such as the AT91SAM9RL). + ADC Controller on your Atmel SoC. If unsure, say N. -- cgit v1.2.3 From 1234f4bada54cfcd4dfeeebccf0295d49174da40 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Thu, 15 Mar 2012 16:10:59 +0100 Subject: hwrng: Kconfig: remove dependency for atmel-rng driver This will allow to select this driver for newer SoCs. Make sure to keep dependency on HAVE_CLK to avoid breaking other machines. Signed-off-by: Nicolas Ferre Acked-by: Herbert Xu --- drivers/char/hw_random/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig index 0689bf6b0183..b2402eb076c7 100644 --- a/drivers/char/hw_random/Kconfig +++ b/drivers/char/hw_random/Kconfig @@ -62,7 +62,7 @@ config HW_RANDOM_AMD config HW_RANDOM_ATMEL tristate "Atmel Random Number Generator support" - depends on HW_RANDOM && ARCH_AT91SAM9G45 + depends on HW_RANDOM && HAVE_CLK default HW_RANDOM ---help--- This driver provides kernel-side support for the Random Number -- cgit v1.2.3 From 29746f48d1b2e903b23daf8cc951fcb47ff0110e Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 13 Apr 2012 13:16:31 +0200 Subject: ARM: ux500: delete U5500 support This platform has been obsoleted and was only available inside of ST-Ericsson, no users of this code are left in the world. This deletes the core U5500 support entirely in the same manner as the obsoleted U8500 silicon was previously deleted. The cpu_is_u5500() macros that can read out the CPU ID is left until the next kernel cycle, this makes it possible to merge deletion of dependent drivers without breakage. This also has the upside of removing the mailbox driver which was our only driver that was outside the drivers/* hiearchy, now the machine directory only handles machines and nothing else. Cc: Srinidhi Kasagar Cc: Rabin Vincent Cc: Jonas Aberg Cc: Per Forlin Cc: Ulf Hansson Signed-off-by: Linus Walleij --- drivers/clocksource/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 5138927a416c..99c6b203e6cd 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -18,7 +18,7 @@ config DW_APB_TIMER config CLKSRC_DBX500_PRCMU bool "Clocksource PRCMU Timer" - depends on UX500_SOC_DB5500 || UX500_SOC_DB8500 + depends on UX500_SOC_DB8500 default y help Use the always on PRCMU Timer as clocksource -- cgit v1.2.3 From dece3709b71a704e810134056f1990922e574da1 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 13 Apr 2012 14:01:39 +0200 Subject: mfd/db5500-prcmu: delete DB5500 PRCMU support This platform has been obsoleted and was only available inside of ST-Ericsson, no users of this code are left in the world. This deletes the core U5500 support entirely in the same manner as the obsoleted U8500 silicon was previously deleted. Cc: Srinidhi Kasagar Cc: Rabin Vincent Cc: Jonas Aberg Cc: Per Forlin Cc: Ulf Hansson Acked-by: Samuel Ortiz Signed-off-by: Linus Walleij --- drivers/mfd/Kconfig | 10 - drivers/mfd/Makefile | 1 - drivers/mfd/db5500-prcmu.c | 451 --------------------------------------------- 3 files changed, 462 deletions(-) delete mode 100644 drivers/mfd/db5500-prcmu.c (limited to 'drivers') diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 11e44386fa9b..fcda9b6a9b28 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -711,16 +711,6 @@ config MFD_DB8500_PRCMU system controller running an XP70 microprocessor, which is accessed through a register map. -config MFD_DB5500_PRCMU - bool "ST-Ericsson DB5500 Power Reset Control Management Unit" - depends on UX500_SOC_DB5500 - select MFD_CORE - help - Select this option to enable support for the DB5500 Power Reset - and Control Management Unit. This is basically an autonomous - system controller running an XP70 microprocessor, which is accessed - through a register map. - config MFD_CS5535 tristate "Support for CS5535 and CS5536 southbridge core functions" select MFD_CORE diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 05fa538c5efe..2f53081216a8 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -95,7 +95,6 @@ obj-$(CONFIG_AB8500_GPADC) += ab8500-gpadc.o obj-$(CONFIG_MFD_DB8500_PRCMU) += db8500-prcmu.o # ab8500-i2c need to come after db8500-prcmu (which provides the channel) obj-$(CONFIG_AB8500_I2C_CORE) += ab8500-i2c.o -obj-$(CONFIG_MFD_DB5500_PRCMU) += db5500-prcmu.o obj-$(CONFIG_MFD_TIMBERDALE) += timberdale.o obj-$(CONFIG_PMIC_ADP5520) += adp5520.o obj-$(CONFIG_LPC_SCH) += lpc_sch.o diff --git a/drivers/mfd/db5500-prcmu.c b/drivers/mfd/db5500-prcmu.c deleted file mode 100644 index bb115b2f04e9..000000000000 --- a/drivers/mfd/db5500-prcmu.c +++ /dev/null @@ -1,451 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License Terms: GNU General Public License v2 - * Author: Mattias Nilsson - * - * U5500 PRCM Unit interface driver - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "dbx500-prcmu-regs.h" - -#define _PRCM_MB_HEADER (tcdm_base + 0xFE8) -#define PRCM_REQ_MB0_HEADER (_PRCM_MB_HEADER + 0x0) -#define PRCM_REQ_MB1_HEADER (_PRCM_MB_HEADER + 0x1) -#define PRCM_REQ_MB2_HEADER (_PRCM_MB_HEADER + 0x2) -#define PRCM_REQ_MB3_HEADER (_PRCM_MB_HEADER + 0x3) -#define PRCM_REQ_MB4_HEADER (_PRCM_MB_HEADER + 0x4) -#define PRCM_REQ_MB5_HEADER (_PRCM_MB_HEADER + 0x5) -#define PRCM_REQ_MB6_HEADER (_PRCM_MB_HEADER + 0x6) -#define PRCM_REQ_MB7_HEADER (_PRCM_MB_HEADER + 0x7) -#define PRCM_ACK_MB0_HEADER (_PRCM_MB_HEADER + 0x8) -#define PRCM_ACK_MB1_HEADER (_PRCM_MB_HEADER + 0x9) -#define PRCM_ACK_MB2_HEADER (_PRCM_MB_HEADER + 0xa) -#define PRCM_ACK_MB3_HEADER (_PRCM_MB_HEADER + 0xb) -#define PRCM_ACK_MB4_HEADER (_PRCM_MB_HEADER + 0xc) -#define PRCM_ACK_MB5_HEADER (_PRCM_MB_HEADER + 0xd) -#define PRCM_ACK_MB6_HEADER (_PRCM_MB_HEADER + 0xe) -#define PRCM_ACK_MB7_HEADER (_PRCM_MB_HEADER + 0xf) - -/* Req Mailboxes */ -#define PRCM_REQ_MB0 (tcdm_base + 0xFD8) -#define PRCM_REQ_MB1 (tcdm_base + 0xFCC) -#define PRCM_REQ_MB2 (tcdm_base + 0xFC4) -#define PRCM_REQ_MB3 (tcdm_base + 0xFC0) -#define PRCM_REQ_MB4 (tcdm_base + 0xF98) -#define PRCM_REQ_MB5 (tcdm_base + 0xF90) -#define PRCM_REQ_MB6 (tcdm_base + 0xF8C) -#define PRCM_REQ_MB7 (tcdm_base + 0xF84) - -/* Ack Mailboxes */ -#define PRCM_ACK_MB0 (tcdm_base + 0xF38) -#define PRCM_ACK_MB1 (tcdm_base + 0xF30) -#define PRCM_ACK_MB2 (tcdm_base + 0xF24) -#define PRCM_ACK_MB3 (tcdm_base + 0xF20) -#define PRCM_ACK_MB4 (tcdm_base + 0xF1C) -#define PRCM_ACK_MB5 (tcdm_base + 0xF14) -#define PRCM_ACK_MB6 (tcdm_base + 0xF0C) -#define PRCM_ACK_MB7 (tcdm_base + 0xF08) - -enum mb_return_code { - RC_SUCCESS, - RC_FAIL, -}; - -/* Mailbox 0 headers. */ -enum mb0_header { - /* request */ - RMB0H_PWR_STATE_TRANS = 1, - RMB0H_WAKE_UP_CFG, - RMB0H_RD_WAKE_UP_ACK, - /* acknowledge */ - AMB0H_WAKE_UP = 1, -}; - -/* Mailbox 5 headers. */ -enum mb5_header { - MB5H_I2C_WRITE = 1, - MB5H_I2C_READ, -}; - -/* Request mailbox 5 fields. */ -#define PRCM_REQ_MB5_I2C_SLAVE (PRCM_REQ_MB5 + 0) -#define PRCM_REQ_MB5_I2C_REG (PRCM_REQ_MB5 + 1) -#define PRCM_REQ_MB5_I2C_SIZE (PRCM_REQ_MB5 + 2) -#define PRCM_REQ_MB5_I2C_DATA (PRCM_REQ_MB5 + 4) - -/* Acknowledge mailbox 5 fields. */ -#define PRCM_ACK_MB5_RETURN_CODE (PRCM_ACK_MB5 + 0) -#define PRCM_ACK_MB5_I2C_DATA (PRCM_ACK_MB5 + 4) - -#define NUM_MB 8 -#define MBOX_BIT BIT -#define ALL_MBOX_BITS (MBOX_BIT(NUM_MB) - 1) - -/* -* Used by MCDE to setup all necessary PRCMU registers -*/ -#define PRCMU_RESET_DSIPLL 0x00004000 -#define PRCMU_UNCLAMP_DSIPLL 0x00400800 - -/* HDMI CLK MGT PLLSW=001 (PLLSOC0), PLLDIV=0x8, = 50 Mhz*/ -#define PRCMU_DSI_CLOCK_SETTING 0x00000128 -/* TVCLK_MGT PLLSW=001 (PLLSOC0) PLLDIV=0x13, = 19.05 MHZ */ -#define PRCMU_DSI_LP_CLOCK_SETTING 0x00000135 -#define PRCMU_PLLDSI_FREQ_SETTING 0x00020121 -#define PRCMU_DSI_PLLOUT_SEL_SETTING 0x00000002 -#define PRCMU_ENABLE_ESCAPE_CLOCK_DIV 0x03000201 -#define PRCMU_DISABLE_ESCAPE_CLOCK_DIV 0x00000101 - -#define PRCMU_ENABLE_PLLDSI 0x00000001 -#define PRCMU_DISABLE_PLLDSI 0x00000000 - -#define PRCMU_DSI_RESET_SW 0x00000003 -#define PRCMU_RESOUTN0_PIN 0x00000001 -#define PRCMU_RESOUTN1_PIN 0x00000002 -#define PRCMU_RESOUTN2_PIN 0x00000004 - -#define PRCMU_PLLDSI_LOCKP_LOCKED 0x3 - -/* - * mb0_transfer - state needed for mailbox 0 communication. - * @lock: The transaction lock. - */ -static struct { - spinlock_t lock; -} mb0_transfer; - -/* - * mb5_transfer - state needed for mailbox 5 communication. - * @lock: The transaction lock. - * @work: The transaction completion structure. - * @ack: Reply ("acknowledge") data. - */ -static struct { - struct mutex lock; - struct completion work; - struct { - u8 header; - u8 status; - u8 value[4]; - } ack; -} mb5_transfer; - -/* PRCMU TCDM base IO address. */ -static __iomem void *tcdm_base; - -/** - * db5500_prcmu_abb_read() - Read register value(s) from the ABB. - * @slave: The I2C slave address. - * @reg: The (start) register address. - * @value: The read out value(s). - * @size: The number of registers to read. - * - * Reads register value(s) from the ABB. - * @size has to be <= 4. - */ -int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size) -{ - int r; - - if ((size < 1) || (4 < size)) - return -EINVAL; - - mutex_lock(&mb5_transfer.lock); - - while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) - cpu_relax(); - writeb(slave, PRCM_REQ_MB5_I2C_SLAVE); - writeb(reg, PRCM_REQ_MB5_I2C_REG); - writeb(size, PRCM_REQ_MB5_I2C_SIZE); - writeb(MB5H_I2C_READ, PRCM_REQ_MB5_HEADER); - - writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET); - wait_for_completion(&mb5_transfer.work); - - r = 0; - if ((mb5_transfer.ack.header == MB5H_I2C_READ) && - (mb5_transfer.ack.status == RC_SUCCESS)) - memcpy(value, mb5_transfer.ack.value, (size_t)size); - else - r = -EIO; - - mutex_unlock(&mb5_transfer.lock); - - return r; -} - -/** - * db5500_prcmu_abb_write() - Write register value(s) to the ABB. - * @slave: The I2C slave address. - * @reg: The (start) register address. - * @value: The value(s) to write. - * @size: The number of registers to write. - * - * Writes register value(s) to the ABB. - * @size has to be <= 4. - */ -int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) -{ - int r; - - if ((size < 1) || (4 < size)) - return -EINVAL; - - mutex_lock(&mb5_transfer.lock); - - while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) - cpu_relax(); - writeb(slave, PRCM_REQ_MB5_I2C_SLAVE); - writeb(reg, PRCM_REQ_MB5_I2C_REG); - writeb(size, PRCM_REQ_MB5_I2C_SIZE); - memcpy_toio(PRCM_REQ_MB5_I2C_DATA, value, size); - writeb(MB5H_I2C_WRITE, PRCM_REQ_MB5_HEADER); - - writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET); - wait_for_completion(&mb5_transfer.work); - - if ((mb5_transfer.ack.header == MB5H_I2C_WRITE) && - (mb5_transfer.ack.status == RC_SUCCESS)) - r = 0; - else - r = -EIO; - - mutex_unlock(&mb5_transfer.lock); - - return r; -} - -int db5500_prcmu_enable_dsipll(void) -{ - int i; - - /* Enable DSIPLL_RESETN resets */ - writel(PRCMU_RESET_DSIPLL, PRCM_APE_RESETN_CLR); - /* Unclamp DSIPLL in/out */ - writel(PRCMU_UNCLAMP_DSIPLL, PRCM_MMIP_LS_CLAMP_CLR); - /* Set DSI PLL FREQ */ - writel(PRCMU_PLLDSI_FREQ_SETTING, PRCM_PLLDSI_FREQ); - writel(PRCMU_DSI_PLLOUT_SEL_SETTING, - PRCM_DSI_PLLOUT_SEL); - /* Enable Escape clocks */ - writel(PRCMU_ENABLE_ESCAPE_CLOCK_DIV, PRCM_DSITVCLK_DIV); - - /* Start DSI PLL */ - writel(PRCMU_ENABLE_PLLDSI, PRCM_PLLDSI_ENABLE); - /* Reset DSI PLL */ - writel(PRCMU_DSI_RESET_SW, PRCM_DSI_SW_RESET); - for (i = 0; i < 10; i++) { - if ((readl(PRCM_PLLDSI_LOCKP) & - PRCMU_PLLDSI_LOCKP_LOCKED) == PRCMU_PLLDSI_LOCKP_LOCKED) - break; - udelay(100); - } - /* Release DSIPLL_RESETN */ - writel(PRCMU_RESET_DSIPLL, PRCM_APE_RESETN_SET); - return 0; -} - -int db5500_prcmu_disable_dsipll(void) -{ - /* Disable dsi pll */ - writel(PRCMU_DISABLE_PLLDSI, PRCM_PLLDSI_ENABLE); - /* Disable escapeclock */ - writel(PRCMU_DISABLE_ESCAPE_CLOCK_DIV, PRCM_DSITVCLK_DIV); - return 0; -} - -int db5500_prcmu_set_display_clocks(void) -{ - /* HDMI and TVCLK Should be handled somewhere else */ - /* PLLDIV=8, PLLSW=2, CLKEN=1 */ - writel(PRCMU_DSI_CLOCK_SETTING, PRCM_HDMICLK_MGT); - /* PLLDIV=14, PLLSW=2, CLKEN=1 */ - writel(PRCMU_DSI_LP_CLOCK_SETTING, PRCM_TVCLK_MGT); - return 0; -} - -static void ack_dbb_wakeup(void) -{ - unsigned long flags; - - spin_lock_irqsave(&mb0_transfer.lock, flags); - - while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(0)) - cpu_relax(); - - writeb(RMB0H_RD_WAKE_UP_ACK, PRCM_REQ_MB0_HEADER); - writel(MBOX_BIT(0), PRCM_MBOX_CPU_SET); - - spin_unlock_irqrestore(&mb0_transfer.lock, flags); -} - -static inline void print_unknown_header_warning(u8 n, u8 header) -{ - pr_warning("prcmu: Unknown message header (%d) in mailbox %d.\n", - header, n); -} - -static bool read_mailbox_0(void) -{ - bool r; - u8 header; - - header = readb(PRCM_ACK_MB0_HEADER); - switch (header) { - case AMB0H_WAKE_UP: - r = true; - break; - default: - print_unknown_header_warning(0, header); - r = false; - break; - } - writel(MBOX_BIT(0), PRCM_ARM_IT1_CLR); - return r; -} - -static bool read_mailbox_1(void) -{ - writel(MBOX_BIT(1), PRCM_ARM_IT1_CLR); - return false; -} - -static bool read_mailbox_2(void) -{ - writel(MBOX_BIT(2), PRCM_ARM_IT1_CLR); - return false; -} - -static bool read_mailbox_3(void) -{ - writel(MBOX_BIT(3), PRCM_ARM_IT1_CLR); - return false; -} - -static bool read_mailbox_4(void) -{ - writel(MBOX_BIT(4), PRCM_ARM_IT1_CLR); - return false; -} - -static bool read_mailbox_5(void) -{ - u8 header; - - header = readb(PRCM_ACK_MB5_HEADER); - switch (header) { - case MB5H_I2C_READ: - memcpy_fromio(mb5_transfer.ack.value, PRCM_ACK_MB5_I2C_DATA, 4); - case MB5H_I2C_WRITE: - mb5_transfer.ack.header = header; - mb5_transfer.ack.status = readb(PRCM_ACK_MB5_RETURN_CODE); - complete(&mb5_transfer.work); - break; - default: - print_unknown_header_warning(5, header); - break; - } - writel(MBOX_BIT(5), PRCM_ARM_IT1_CLR); - return false; -} - -static bool read_mailbox_6(void) -{ - writel(MBOX_BIT(6), PRCM_ARM_IT1_CLR); - return false; -} - -static bool read_mailbox_7(void) -{ - writel(MBOX_BIT(7), PRCM_ARM_IT1_CLR); - return false; -} - -static bool (* const read_mailbox[NUM_MB])(void) = { - read_mailbox_0, - read_mailbox_1, - read_mailbox_2, - read_mailbox_3, - read_mailbox_4, - read_mailbox_5, - read_mailbox_6, - read_mailbox_7 -}; - -static irqreturn_t prcmu_irq_handler(int irq, void *data) -{ - u32 bits; - u8 n; - irqreturn_t r; - - bits = (readl(PRCM_ARM_IT1_VAL) & ALL_MBOX_BITS); - if (unlikely(!bits)) - return IRQ_NONE; - - r = IRQ_HANDLED; - for (n = 0; bits; n++) { - if (bits & MBOX_BIT(n)) { - bits -= MBOX_BIT(n); - if (read_mailbox[n]()) - r = IRQ_WAKE_THREAD; - } - } - return r; -} - -static irqreturn_t prcmu_irq_thread_fn(int irq, void *data) -{ - ack_dbb_wakeup(); - return IRQ_HANDLED; -} - -void __init db5500_prcmu_early_init(void) -{ - tcdm_base = __io_address(U5500_PRCMU_TCDM_BASE); - spin_lock_init(&mb0_transfer.lock); - mutex_init(&mb5_transfer.lock); - init_completion(&mb5_transfer.work); -} - -/** - * prcmu_fw_init - arch init call for the Linux PRCMU fw init logic - * - */ -int __init db5500_prcmu_init(void) -{ - int r = 0; - - if (ux500_is_svp() || !cpu_is_u5500()) - return -ENODEV; - - /* Clean up the mailbox interrupts after pre-kernel code. */ - writel(ALL_MBOX_BITS, PRCM_ARM_IT1_CLR); - - r = request_threaded_irq(IRQ_DB5500_PRCMU1, prcmu_irq_handler, - prcmu_irq_thread_fn, 0, "prcmu", NULL); - if (r < 0) { - pr_err("prcmu: Failed to allocate IRQ_DB5500_PRCMU1.\n"); - return -EBUSY; - } - return 0; -} - -arch_initcall(db5500_prcmu_init); -- cgit v1.2.3 From 72fb92200d6c31b9982c06784e4bcff2f5b7d8b6 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 13 Apr 2012 14:11:36 +0200 Subject: mfd/ab5500: delete AB5500 support This platform has been obsoleted and was only available inside of ST-Ericsson, no users of this code are left in the world. This deletes the core U5500 support entirely in the same manner as the obsoleted U8500 silicon was previously deleted. Cc: Srinidhi Kasagar Cc: Rabin Vincent Cc: Jonas Aberg Cc: Per Forlin Cc: Ulf Hansson Acked-by: Samuel Ortiz Signed-off-by: Linus Walleij --- drivers/mfd/Kconfig | 17 - drivers/mfd/Makefile | 2 - drivers/mfd/ab5500-core.c | 1439 ------------------------------------------ drivers/mfd/ab5500-debugfs.c | 807 ----------------------- drivers/mfd/ab5500-debugfs.h | 22 - 5 files changed, 2287 deletions(-) delete mode 100644 drivers/mfd/ab5500-core.c delete mode 100644 drivers/mfd/ab5500-debugfs.c delete mode 100644 drivers/mfd/ab5500-debugfs.h (limited to 'drivers') diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index fcda9b6a9b28..d875bfa56ad5 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -648,23 +648,6 @@ config EZX_PCAP This enables the PCAP ASIC present on EZX Phones. This is needed for MMC, TouchScreen, Sound, USB, etc.. -config AB5500_CORE - bool "ST-Ericsson AB5500 Mixed Signal Power Management chip" - depends on ABX500_CORE && MFD_DB5500_PRCMU - select MFD_CORE - help - Select this option to enable access to AB5500 power management - chip. This connects to the db5500 chip via the I2C bus via PRCMU. - This chip embeds various other multimedia funtionalities as well. - -config AB5500_DEBUG - bool "Enable debug info via debugfs" - depends on AB5500_CORE && DEBUG_FS - default y if DEBUG_FS - help - Select this option if you want debug information from the AB5500 - using the debug filesystem, debugfs. - config AB8500_CORE bool "ST-Ericsson AB8500 Mixed Signal Power Management chip" depends on GENERIC_HARDIRQS && ABX500_CORE diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 2f53081216a8..669ba7d85a36 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -87,8 +87,6 @@ obj-$(CONFIG_PCF50633_GPIO) += pcf50633-gpio.o obj-$(CONFIG_ABX500_CORE) += abx500-core.o obj-$(CONFIG_AB3100_CORE) += ab3100-core.o obj-$(CONFIG_AB3100_OTP) += ab3100-otp.o -obj-$(CONFIG_AB5500_CORE) += ab5500-core.o -obj-$(CONFIG_AB5500_DEBUG) += ab5500-debugfs.o obj-$(CONFIG_AB8500_CORE) += ab8500-core.o ab8500-sysctrl.o obj-$(CONFIG_AB8500_DEBUG) += ab8500-debugfs.o obj-$(CONFIG_AB8500_GPADC) += ab8500-gpadc.o diff --git a/drivers/mfd/ab5500-core.c b/drivers/mfd/ab5500-core.c deleted file mode 100644 index 54d0fe40845f..000000000000 --- a/drivers/mfd/ab5500-core.c +++ /dev/null @@ -1,1439 +0,0 @@ -/* - * Copyright (C) 2007-2011 ST-Ericsson - * License terms: GNU General Public License (GPL) version 2 - * Low-level core for exclusive access to the AB5500 IC on the I2C bus - * and some basic chip-configuration. - * Author: Bengt Jonsson - * Author: Mattias Nilsson - * Author: Mattias Wallin - * Author: Rickard Andersson - * Author: Karl Komierowski - * Author: Bibek Basu - * - * TODO: Event handling with irq_chip. Waiting for PRCMU fw support. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "ab5500-core.h" -#include "ab5500-debugfs.h" - -#define AB5500_NUM_EVENT_REG 23 -#define AB5500_IT_LATCH0_REG 0x40 -#define AB5500_IT_MASK0_REG 0x60 - -/* - * Permissible register ranges for reading and writing per device and bank. - * - * The ranges must be listed in increasing address order, and no overlaps are - * allowed. It is assumed that write permission implies read permission - * (i.e. only RO and RW permissions should be used). Ranges with write - * permission must not be split up. - */ - -#define NO_RANGE {.count = 0, .range = NULL,} -static struct ab5500_i2c_banks ab5500_bank_ranges[AB5500_NUM_DEVICES] = { - [AB5500_DEVID_USB] = { - .nbanks = 1, - .bank = (struct ab5500_i2c_ranges []) { - { - .bankid = AB5500_BANK_USB, - .nranges = 12, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x01, - .last = 0x01, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x80, - .last = 0x83, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x87, - .last = 0x8A, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x8B, - .last = 0x8B, - .perm = AB5500_PERM_RO, - }, - { - .first = 0x91, - .last = 0x92, - .perm = AB5500_PERM_RO, - }, - { - .first = 0x93, - .last = 0x93, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x94, - .last = 0x94, - .perm = AB5500_PERM_RO, - }, - { - .first = 0xA8, - .last = 0xB0, - .perm = AB5500_PERM_RO, - }, - { - .first = 0xB2, - .last = 0xB2, - .perm = AB5500_PERM_RO, - }, - { - .first = 0xB4, - .last = 0xBC, - .perm = AB5500_PERM_RO, - }, - { - .first = 0xBF, - .last = 0xBF, - .perm = AB5500_PERM_RO, - }, - { - .first = 0xC1, - .last = 0xC5, - .perm = AB5500_PERM_RO, - }, - }, - }, - }, - }, - [AB5500_DEVID_ADC] = { - .nbanks = 1, - .bank = (struct ab5500_i2c_ranges []) { - { - .bankid = AB5500_BANK_ADC, - .nranges = 6, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x1F, - .last = 0x22, - .perm = AB5500_PERM_RO, - }, - { - .first = 0x23, - .last = 0x24, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x26, - .last = 0x2D, - .perm = AB5500_PERM_RO, - }, - { - .first = 0x2F, - .last = 0x34, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x37, - .last = 0x57, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x58, - .last = 0x58, - .perm = AB5500_PERM_RO, - }, - }, - }, - }, - }, - [AB5500_DEVID_LEDS] = { - .nbanks = 1, - .bank = (struct ab5500_i2c_ranges []) { - { - .bankid = AB5500_BANK_LED, - .nranges = 1, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x00, - .last = 0x0C, - .perm = AB5500_PERM_RW, - }, - }, - }, - }, - }, - [AB5500_DEVID_VIDEO] = { - .nbanks = 1, - .bank = (struct ab5500_i2c_ranges []) { - { - .bankid = AB5500_BANK_VDENC, - .nranges = 12, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x00, - .last = 0x08, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x09, - .last = 0x09, - .perm = AB5500_PERM_RO, - }, - { - .first = 0x0A, - .last = 0x12, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x15, - .last = 0x19, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x1B, - .last = 0x21, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x27, - .last = 0x2C, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x41, - .last = 0x41, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x45, - .last = 0x5B, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x5D, - .last = 0x5D, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x69, - .last = 0x69, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x6C, - .last = 0x6D, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x80, - .last = 0x81, - .perm = AB5500_PERM_RW, - }, - }, - }, - }, - }, - [AB5500_DEVID_REGULATORS] = { - .nbanks = 2, - .bank = (struct ab5500_i2c_ranges []) { - { - .bankid = AB5500_BANK_STARTUP, - .nranges = 12, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x00, - .last = 0x01, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x1F, - .last = 0x1F, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x2E, - .last = 0x2E, - .perm = AB5500_PERM_RO, - }, - { - .first = 0x2F, - .last = 0x30, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x50, - .last = 0x51, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x60, - .last = 0x61, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x66, - .last = 0x8A, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x8C, - .last = 0x96, - .perm = AB5500_PERM_RW, - }, - { - .first = 0xAA, - .last = 0xB4, - .perm = AB5500_PERM_RW, - }, - { - .first = 0xB7, - .last = 0xBF, - .perm = AB5500_PERM_RW, - }, - { - .first = 0xC1, - .last = 0xCA, - .perm = AB5500_PERM_RW, - }, - { - .first = 0xD3, - .last = 0xE0, - .perm = AB5500_PERM_RW, - }, - }, - }, - { - .bankid = AB5500_BANK_SIM_USBSIM, - .nranges = 1, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x13, - .last = 0x19, - .perm = AB5500_PERM_RW, - }, - }, - }, - }, - }, - [AB5500_DEVID_SIM] = { - .nbanks = 1, - .bank = (struct ab5500_i2c_ranges []) { - { - .bankid = AB5500_BANK_SIM_USBSIM, - .nranges = 1, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x13, - .last = 0x19, - .perm = AB5500_PERM_RW, - }, - }, - }, - }, - }, - [AB5500_DEVID_RTC] = { - .nbanks = 1, - .bank = (struct ab5500_i2c_ranges []) { - { - .bankid = AB5500_BANK_RTC, - .nranges = 2, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x00, - .last = 0x04, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x06, - .last = 0x0C, - .perm = AB5500_PERM_RW, - }, - }, - }, - }, - }, - [AB5500_DEVID_CHARGER] = { - .nbanks = 1, - .bank = (struct ab5500_i2c_ranges []) { - { - .bankid = AB5500_BANK_CHG, - .nranges = 2, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x11, - .last = 0x11, - .perm = AB5500_PERM_RO, - }, - { - .first = 0x12, - .last = 0x1B, - .perm = AB5500_PERM_RW, - }, - }, - }, - }, - }, - [AB5500_DEVID_FUELGAUGE] = { - .nbanks = 1, - .bank = (struct ab5500_i2c_ranges []) { - { - .bankid = AB5500_BANK_FG_BATTCOM_ACC, - .nranges = 2, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x00, - .last = 0x0B, - .perm = AB5500_PERM_RO, - }, - { - .first = 0x0C, - .last = 0x10, - .perm = AB5500_PERM_RW, - }, - }, - }, - }, - }, - [AB5500_DEVID_VIBRATOR] = { - .nbanks = 1, - .bank = (struct ab5500_i2c_ranges []) { - { - .bankid = AB5500_BANK_VIBRA, - .nranges = 2, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x10, - .last = 0x13, - .perm = AB5500_PERM_RW, - }, - { - .first = 0xFE, - .last = 0xFE, - .perm = AB5500_PERM_RW, - }, - }, - }, - }, - }, - [AB5500_DEVID_CODEC] = { - .nbanks = 1, - .bank = (struct ab5500_i2c_ranges []) { - { - .bankid = AB5500_BANK_AUDIO_HEADSETUSB, - .nranges = 2, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x00, - .last = 0x48, - .perm = AB5500_PERM_RW, - }, - { - .first = 0xEB, - .last = 0xFB, - .perm = AB5500_PERM_RW, - }, - }, - }, - }, - }, - [AB5500_DEVID_POWER] = { - .nbanks = 2, - .bank = (struct ab5500_i2c_ranges []) { - { - .bankid = AB5500_BANK_STARTUP, - .nranges = 1, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x30, - .last = 0x30, - .perm = AB5500_PERM_RW, - }, - }, - }, - { - .bankid = AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP, - .nranges = 1, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x01, - .last = 0x01, - .perm = AB5500_PERM_RW, - }, - }, - }, - }, - }, -}; - -#define AB5500_IRQ(bank, bit) ((bank) * 8 + (bit)) - -/* I appologize for the resource names beeing a mix of upper case - * and lower case but I want them to be exact as the documentation */ -static struct mfd_cell ab5500_devs[AB5500_NUM_DEVICES] = { - [AB5500_DEVID_LEDS] = { - .name = "ab5500-leds", - .id = AB5500_DEVID_LEDS, - }, - [AB5500_DEVID_POWER] = { - .name = "ab5500-power", - .id = AB5500_DEVID_POWER, - }, - [AB5500_DEVID_REGULATORS] = { - .name = "ab5500-regulator", - .id = AB5500_DEVID_REGULATORS, - }, - [AB5500_DEVID_SIM] = { - .name = "ab5500-sim", - .id = AB5500_DEVID_SIM, - .num_resources = 1, - .resources = (struct resource[]) { - { - .name = "SIMOFF", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(2, 0), /*rising*/ - .end = AB5500_IRQ(2, 1), /*falling*/ - }, - }, - }, - [AB5500_DEVID_RTC] = { - .name = "ab5500-rtc", - .id = AB5500_DEVID_RTC, - .num_resources = 1, - .resources = (struct resource[]) { - { - .name = "RTC_Alarm", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(1, 7), - .end = AB5500_IRQ(1, 7), - } - }, - }, - [AB5500_DEVID_CHARGER] = { - .name = "ab5500-charger", - .id = AB5500_DEVID_CHARGER, - }, - [AB5500_DEVID_ADC] = { - .name = "ab5500-adc", - .id = AB5500_DEVID_ADC, - .num_resources = 10, - .resources = (struct resource[]) { - { - .name = "TRIGGER-0", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(0, 0), - .end = AB5500_IRQ(0, 0), - }, - { - .name = "TRIGGER-1", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(0, 1), - .end = AB5500_IRQ(0, 1), - }, - { - .name = "TRIGGER-2", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(0, 2), - .end = AB5500_IRQ(0, 2), - }, - { - .name = "TRIGGER-3", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(0, 3), - .end = AB5500_IRQ(0, 3), - }, - { - .name = "TRIGGER-4", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(0, 4), - .end = AB5500_IRQ(0, 4), - }, - { - .name = "TRIGGER-5", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(0, 5), - .end = AB5500_IRQ(0, 5), - }, - { - .name = "TRIGGER-6", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(0, 6), - .end = AB5500_IRQ(0, 6), - }, - { - .name = "TRIGGER-7", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(0, 7), - .end = AB5500_IRQ(0, 7), - }, - { - .name = "TRIGGER-VBAT", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(0, 8), - .end = AB5500_IRQ(0, 8), - }, - { - .name = "TRIGGER-VBAT-TXON", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(0, 9), - .end = AB5500_IRQ(0, 9), - }, - }, - }, - [AB5500_DEVID_FUELGAUGE] = { - .name = "ab5500-fuelgauge", - .id = AB5500_DEVID_FUELGAUGE, - .num_resources = 6, - .resources = (struct resource[]) { - { - .name = "Batt_attach", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(7, 5), - .end = AB5500_IRQ(7, 5), - }, - { - .name = "Batt_removal", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(7, 6), - .end = AB5500_IRQ(7, 6), - }, - { - .name = "UART_framing", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(7, 7), - .end = AB5500_IRQ(7, 7), - }, - { - .name = "UART_overrun", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(8, 0), - .end = AB5500_IRQ(8, 0), - }, - { - .name = "UART_Rdy_RX", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(8, 1), - .end = AB5500_IRQ(8, 1), - }, - { - .name = "UART_Rdy_TX", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(8, 2), - .end = AB5500_IRQ(8, 2), - }, - }, - }, - [AB5500_DEVID_VIBRATOR] = { - .name = "ab5500-vibrator", - .id = AB5500_DEVID_VIBRATOR, - }, - [AB5500_DEVID_CODEC] = { - .name = "ab5500-codec", - .id = AB5500_DEVID_CODEC, - .num_resources = 3, - .resources = (struct resource[]) { - { - .name = "audio_spkr1_ovc", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(9, 5), - .end = AB5500_IRQ(9, 5), - }, - { - .name = "audio_plllocked", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(9, 6), - .end = AB5500_IRQ(9, 6), - }, - { - .name = "audio_spkr2_ovc", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(17, 4), - .end = AB5500_IRQ(17, 4), - }, - }, - }, - [AB5500_DEVID_USB] = { - .name = "ab5500-usb", - .id = AB5500_DEVID_USB, - .num_resources = 36, - .resources = (struct resource[]) { - { - .name = "Link_Update", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(22, 1), - .end = AB5500_IRQ(22, 1), - }, - { - .name = "DCIO", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(8, 3), - .end = AB5500_IRQ(8, 4), - }, - { - .name = "VBUS_R", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(8, 5), - .end = AB5500_IRQ(8, 5), - }, - { - .name = "VBUS_F", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(8, 6), - .end = AB5500_IRQ(8, 6), - }, - { - .name = "CHGstate_10_PCVBUSchg", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(8, 7), - .end = AB5500_IRQ(8, 7), - }, - { - .name = "DCIOreverse_ovc", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(9, 0), - .end = AB5500_IRQ(9, 0), - }, - { - .name = "USBCharDetDone", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(9, 1), - .end = AB5500_IRQ(9, 1), - }, - { - .name = "DCIO_no_limit", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(9, 2), - .end = AB5500_IRQ(9, 2), - }, - { - .name = "USB_suspend", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(9, 3), - .end = AB5500_IRQ(9, 3), - }, - { - .name = "DCIOreverse_fwdcurrent", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(9, 4), - .end = AB5500_IRQ(9, 4), - }, - { - .name = "Vbus_Imeasmax_change", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(9, 5), - .end = AB5500_IRQ(9, 6), - }, - { - .name = "OVV", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(14, 5), - .end = AB5500_IRQ(14, 5), - }, - { - .name = "USBcharging_NOTok", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(15, 3), - .end = AB5500_IRQ(15, 3), - }, - { - .name = "usb_adp_sensoroff", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(15, 6), - .end = AB5500_IRQ(15, 6), - }, - { - .name = "usb_adp_probeplug", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(15, 7), - .end = AB5500_IRQ(15, 7), - }, - { - .name = "usb_adp_sinkerror", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(16, 0), - .end = AB5500_IRQ(16, 6), - }, - { - .name = "usb_adp_sourceerror", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(16, 1), - .end = AB5500_IRQ(16, 1), - }, - { - .name = "usb_idgnd_r", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(16, 2), - .end = AB5500_IRQ(16, 2), - }, - { - .name = "usb_idgnd_f", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(16, 3), - .end = AB5500_IRQ(16, 3), - }, - { - .name = "usb_iddetR1", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(16, 4), - .end = AB5500_IRQ(16, 5), - }, - { - .name = "usb_iddetR2", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(16, 6), - .end = AB5500_IRQ(16, 7), - }, - { - .name = "usb_iddetR3", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(17, 0), - .end = AB5500_IRQ(17, 1), - }, - { - .name = "usb_iddetR4", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(17, 2), - .end = AB5500_IRQ(17, 3), - }, - { - .name = "CharTempWindowOk", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(17, 7), - .end = AB5500_IRQ(18, 0), - }, - { - .name = "USB_SprDetect", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(18, 1), - .end = AB5500_IRQ(18, 1), - }, - { - .name = "usb_adp_probe_unplug", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(18, 2), - .end = AB5500_IRQ(18, 2), - }, - { - .name = "VBUSChDrop", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(18, 3), - .end = AB5500_IRQ(18, 4), - }, - { - .name = "dcio_char_rec_done", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(18, 5), - .end = AB5500_IRQ(18, 5), - }, - { - .name = "Charging_stopped_by_temp", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(18, 6), - .end = AB5500_IRQ(18, 6), - }, - { - .name = "CHGstate_11_SafeModeVBUS", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(21, 1), - .end = AB5500_IRQ(21, 2), - }, - { - .name = "CHGstate_12_comletedVBUS", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(21, 2), - .end = AB5500_IRQ(21, 2), - }, - { - .name = "CHGstate_13_completedVBUS", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(21, 3), - .end = AB5500_IRQ(21, 3), - }, - { - .name = "CHGstate_14_FullChgDCIO", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(21, 4), - .end = AB5500_IRQ(21, 4), - }, - { - .name = "CHGstate_15_SafeModeDCIO", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(21, 5), - .end = AB5500_IRQ(21, 5), - }, - { - .name = "CHGstate_16_OFFsuspendDCIO", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(21, 6), - .end = AB5500_IRQ(21, 6), - }, - { - .name = "CHGstate_17_completedDCIO", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(21, 7), - .end = AB5500_IRQ(21, 7), - }, - }, - }, - [AB5500_DEVID_OTP] = { - .name = "ab5500-otp", - .id = AB5500_DEVID_OTP, - }, - [AB5500_DEVID_VIDEO] = { - .name = "ab5500-video", - .id = AB5500_DEVID_VIDEO, - .num_resources = 1, - .resources = (struct resource[]) { - { - .name = "plugTVdet", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(22, 2), - .end = AB5500_IRQ(22, 2), - }, - }, - }, - [AB5500_DEVID_DBIECI] = { - .name = "ab5500-dbieci", - .id = AB5500_DEVID_DBIECI, - .num_resources = 10, - .resources = (struct resource[]) { - { - .name = "COLL", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(14, 0), - .end = AB5500_IRQ(14, 0), - }, - { - .name = "RESERR", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(14, 1), - .end = AB5500_IRQ(14, 1), - }, - { - .name = "FRAERR", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(14, 2), - .end = AB5500_IRQ(14, 2), - }, - { - .name = "COMERR", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(14, 3), - .end = AB5500_IRQ(14, 3), - }, - { - .name = "BSI_indicator", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(14, 4), - .end = AB5500_IRQ(14, 4), - }, - { - .name = "SPDSET", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(14, 6), - .end = AB5500_IRQ(14, 6), - }, - { - .name = "DSENT", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(14, 7), - .end = AB5500_IRQ(14, 7), - }, - { - .name = "DREC", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(15, 0), - .end = AB5500_IRQ(15, 0), - }, - { - .name = "ACCINT", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(15, 1), - .end = AB5500_IRQ(15, 1), - }, - { - .name = "NOPINT", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(15, 2), - .end = AB5500_IRQ(15, 2), - }, - }, - }, - [AB5500_DEVID_ONSWA] = { - .name = "ab5500-onswa", - .id = AB5500_DEVID_ONSWA, - .num_resources = 2, - .resources = (struct resource[]) { - { - .name = "ONSWAn_rising", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(1, 3), - .end = AB5500_IRQ(1, 3), - }, - { - .name = "ONSWAn_falling", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(1, 4), - .end = AB5500_IRQ(1, 4), - }, - }, - }, -}; - -/* - * Functionality for getting/setting register values. - */ -int ab5500_get_register_interruptible_raw(struct ab5500 *ab, - u8 bank, u8 reg, - u8 *value) -{ - int err; - - if (bank >= AB5500_NUM_BANKS) - return -EINVAL; - - err = mutex_lock_interruptible(&ab->access_mutex); - if (err) - return err; - err = db5500_prcmu_abb_read(bankinfo[bank].slave_addr, reg, value, 1); - - mutex_unlock(&ab->access_mutex); - return err; -} - -static int get_register_page_interruptible(struct ab5500 *ab, u8 bank, - u8 first_reg, u8 *regvals, u8 numregs) -{ - int err; - - if (bank >= AB5500_NUM_BANKS) - return -EINVAL; - - err = mutex_lock_interruptible(&ab->access_mutex); - if (err) - return err; - - while (numregs) { - /* The hardware limit for get page is 4 */ - u8 curnum = min_t(u8, numregs, 4u); - - err = db5500_prcmu_abb_read(bankinfo[bank].slave_addr, - first_reg, regvals, curnum); - if (err) - goto out; - - numregs -= curnum; - first_reg += curnum; - regvals += curnum; - } - -out: - mutex_unlock(&ab->access_mutex); - return err; -} - -int ab5500_mask_and_set_register_interruptible_raw(struct ab5500 *ab, u8 bank, - u8 reg, u8 bitmask, u8 bitvalues) -{ - int err = 0; - - if (bank >= AB5500_NUM_BANKS) - return -EINVAL; - - if (bitmask) { - u8 buf; - - err = mutex_lock_interruptible(&ab->access_mutex); - if (err) - return err; - - if (bitmask == 0xFF) /* No need to read in this case. */ - buf = bitvalues; - else { /* Read and modify the register value. */ - err = db5500_prcmu_abb_read(bankinfo[bank].slave_addr, - reg, &buf, 1); - if (err) - return err; - - buf = ((~bitmask & buf) | (bitmask & bitvalues)); - } - /* Write the new value. */ - err = db5500_prcmu_abb_write(bankinfo[bank].slave_addr, reg, - &buf, 1); - - mutex_unlock(&ab->access_mutex); - } - return err; -} - -static int -set_register_interruptible(struct ab5500 *ab, u8 bank, u8 reg, u8 value) -{ - return ab5500_mask_and_set_register_interruptible_raw(ab, bank, reg, - 0xff, value); -} - -/* - * Read/write permission checking functions. - */ -static const struct ab5500_i2c_ranges *get_bankref(u8 devid, u8 bank) -{ - u8 i; - - if (devid < AB5500_NUM_DEVICES) { - for (i = 0; i < ab5500_bank_ranges[devid].nbanks; i++) { - if (ab5500_bank_ranges[devid].bank[i].bankid == bank) - return &ab5500_bank_ranges[devid].bank[i]; - } - } - return NULL; -} - -static bool page_write_allowed(u8 devid, u8 bank, u8 first_reg, u8 last_reg) -{ - u8 i; /* range loop index */ - const struct ab5500_i2c_ranges *bankref; - - bankref = get_bankref(devid, bank); - if (bankref == NULL || last_reg < first_reg) - return false; - - for (i = 0; i < bankref->nranges; i++) { - if (first_reg < bankref->range[i].first) - break; - if ((last_reg <= bankref->range[i].last) && - (bankref->range[i].perm & AB5500_PERM_WR)) - return true; - } - return false; -} - -static bool reg_write_allowed(u8 devid, u8 bank, u8 reg) -{ - return page_write_allowed(devid, bank, reg, reg); -} - -static bool page_read_allowed(u8 devid, u8 bank, u8 first_reg, u8 last_reg) -{ - u8 i; - const struct ab5500_i2c_ranges *bankref; - - bankref = get_bankref(devid, bank); - if (bankref == NULL || last_reg < first_reg) - return false; - - - /* Find the range (if it exists in the list) that includes first_reg. */ - for (i = 0; i < bankref->nranges; i++) { - if (first_reg < bankref->range[i].first) - return false; - if (first_reg <= bankref->range[i].last) - break; - } - /* Make sure that the entire range up to and including last_reg is - * readable. This may span several of the ranges in the list. - */ - while ((i < bankref->nranges) && - (bankref->range[i].perm & AB5500_PERM_RD)) { - if (last_reg <= bankref->range[i].last) - return true; - if ((++i >= bankref->nranges) || - (bankref->range[i].first != - (bankref->range[i - 1].last + 1))) { - break; - } - } - return false; -} - -static bool reg_read_allowed(u8 devid, u8 bank, u8 reg) -{ - return page_read_allowed(devid, bank, reg, reg); -} - - -/* - * The exported register access functionality. - */ -static int ab5500_get_chip_id(struct device *dev) -{ - struct ab5500 *ab = dev_get_drvdata(dev->parent); - - return (int)ab->chip_id; -} - -static int ab5500_mask_and_set_register_interruptible(struct device *dev, - u8 bank, u8 reg, u8 bitmask, u8 bitvalues) -{ - struct ab5500 *ab; - struct platform_device *pdev = to_platform_device(dev); - - if ((AB5500_NUM_BANKS <= bank) || - !reg_write_allowed(pdev->id, bank, reg)) - return -EINVAL; - - ab = dev_get_drvdata(dev->parent); - return ab5500_mask_and_set_register_interruptible_raw(ab, bank, reg, - bitmask, bitvalues); -} - -static int ab5500_set_register_interruptible(struct device *dev, u8 bank, - u8 reg, u8 value) -{ - return ab5500_mask_and_set_register_interruptible(dev, bank, reg, 0xFF, - value); -} - -static int ab5500_get_register_interruptible(struct device *dev, u8 bank, - u8 reg, u8 *value) -{ - struct ab5500 *ab; - struct platform_device *pdev = to_platform_device(dev); - - if ((AB5500_NUM_BANKS <= bank) || - !reg_read_allowed(pdev->id, bank, reg)) - return -EINVAL; - - ab = dev_get_drvdata(dev->parent); - return ab5500_get_register_interruptible_raw(ab, bank, reg, value); -} - -static int ab5500_get_register_page_interruptible(struct device *dev, u8 bank, - u8 first_reg, u8 *regvals, u8 numregs) -{ - struct ab5500 *ab; - struct platform_device *pdev = to_platform_device(dev); - - if ((AB5500_NUM_BANKS <= bank) || - !page_read_allowed(pdev->id, bank, - first_reg, (first_reg + numregs - 1))) - return -EINVAL; - - ab = dev_get_drvdata(dev->parent); - return get_register_page_interruptible(ab, bank, first_reg, regvals, - numregs); -} - -static int -ab5500_event_registers_startup_state_get(struct device *dev, u8 *event) -{ - struct ab5500 *ab; - - ab = dev_get_drvdata(dev->parent); - if (!ab->startup_events_read) - return -EAGAIN; /* Try again later */ - - memcpy(event, ab->startup_events, AB5500_NUM_EVENT_REG); - return 0; -} - -static struct abx500_ops ab5500_ops = { - .get_chip_id = ab5500_get_chip_id, - .get_register = ab5500_get_register_interruptible, - .set_register = ab5500_set_register_interruptible, - .get_register_page = ab5500_get_register_page_interruptible, - .set_register_page = NULL, - .mask_and_set_register = ab5500_mask_and_set_register_interruptible, - .event_registers_startup_state_get = - ab5500_event_registers_startup_state_get, - .startup_irq_enabled = NULL, -}; - -/* - * ab5500_setup : Basic set-up, datastructure creation/destruction - * and I2C interface.This sets up a default config - * in the AB5500 chip so that it will work as expected. - * @ab : Pointer to ab5500 structure - * @settings : Pointer to struct abx500_init_settings - * @size : Size of init data - */ -static int __init ab5500_setup(struct ab5500 *ab, - struct abx500_init_settings *settings, unsigned int size) -{ - int err = 0; - int i; - - for (i = 0; i < size; i++) { - err = ab5500_mask_and_set_register_interruptible_raw(ab, - settings[i].bank, - settings[i].reg, - 0xFF, settings[i].setting); - if (err) - goto exit_no_setup; - - /* If event mask register update the event mask in ab5500 */ - if ((settings[i].bank == AB5500_BANK_IT) && - (AB5500_MASK_BASE <= settings[i].reg) && - (settings[i].reg <= AB5500_MASK_END)) { - ab->mask[settings[i].reg - AB5500_MASK_BASE] = - settings[i].setting; - } - } -exit_no_setup: - return err; -} - -struct ab_family_id { - u8 id; - char *name; -}; - -static const struct ab_family_id ids[] __initdata = { - /* AB5500 */ - { - .id = AB5500_1_0, - .name = "1.0" - }, - { - .id = AB5500_1_1, - .name = "1.1" - }, - /* Terminator */ - { - .id = 0x00, - } -}; - -static int __init ab5500_probe(struct platform_device *pdev) -{ - struct ab5500 *ab; - struct ab5500_platform_data *ab5500_plf_data = - pdev->dev.platform_data; - int err; - int i; - - ab = kzalloc(sizeof(struct ab5500), GFP_KERNEL); - if (!ab) { - dev_err(&pdev->dev, - "could not allocate ab5500 device\n"); - return -ENOMEM; - } - - /* Initialize data structure */ - mutex_init(&ab->access_mutex); - mutex_init(&ab->irq_lock); - ab->dev = &pdev->dev; - - platform_set_drvdata(pdev, ab); - - /* Read chip ID register */ - err = ab5500_get_register_interruptible_raw(ab, - AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP, - AB5500_CHIP_ID, &ab->chip_id); - if (err) { - dev_err(&pdev->dev, "could not communicate with the analog " - "baseband chip\n"); - goto exit_no_detect; - } - - for (i = 0; ids[i].id != 0x0; i++) { - if (ids[i].id == ab->chip_id) { - snprintf(&ab->chip_name[0], sizeof(ab->chip_name) - 1, - "AB5500 %s", ids[i].name); - break; - } - } - if (ids[i].id == 0x0) { - dev_err(&pdev->dev, "unknown analog baseband chip id: 0x%x\n", - ab->chip_id); - dev_err(&pdev->dev, "driver not started!\n"); - goto exit_no_detect; - } - - /* Clear and mask all interrupts */ - for (i = 0; i < AB5500_NUM_IRQ_REGS; i++) { - u8 latchreg = AB5500_IT_LATCH0_REG + i; - u8 maskreg = AB5500_IT_MASK0_REG + i; - u8 val; - - ab5500_get_register_interruptible_raw(ab, AB5500_BANK_IT, - latchreg, &val); - set_register_interruptible(ab, AB5500_BANK_IT, maskreg, 0xff); - ab->mask[i] = ab->oldmask[i] = 0xff; - } - - err = abx500_register_ops(&pdev->dev, &ab5500_ops); - if (err) { - dev_err(&pdev->dev, "ab5500_register ops error\n"); - goto exit_no_detect; - } - - /* Set up and register the platform devices. */ - for (i = 0; i < AB5500_NUM_DEVICES; i++) { - ab5500_devs[i].platform_data = ab5500_plf_data->dev_data[i]; - ab5500_devs[i].pdata_size = - sizeof(ab5500_plf_data->dev_data[i]); - } - - err = mfd_add_devices(&pdev->dev, 0, ab5500_devs, - ARRAY_SIZE(ab5500_devs), NULL, - ab5500_plf_data->irq.base); - if (err) { - dev_err(&pdev->dev, "ab5500_mfd_add_device error\n"); - goto exit_no_detect; - } - - err = ab5500_setup(ab, ab5500_plf_data->init_settings, - ab5500_plf_data->init_settings_sz); - if (err) { - dev_err(&pdev->dev, "ab5500_setup error\n"); - goto exit_no_detect; - } - - ab5500_setup_debugfs(ab); - - dev_info(&pdev->dev, "detected AB chip: %s\n", &ab->chip_name[0]); - return 0; - -exit_no_detect: - kfree(ab); - return err; -} - -static int __exit ab5500_remove(struct platform_device *pdev) -{ - struct ab5500 *ab = platform_get_drvdata(pdev); - - ab5500_remove_debugfs(); - mfd_remove_devices(&pdev->dev); - kfree(ab); - return 0; -} - -static struct platform_driver ab5500_driver = { - .driver = { - .name = "ab5500-core", - .owner = THIS_MODULE, - }, - .remove = __exit_p(ab5500_remove), -}; - -static int __init ab5500_core_init(void) -{ - return platform_driver_probe(&ab5500_driver, ab5500_probe); -} - -static void __exit ab5500_core_exit(void) -{ - platform_driver_unregister(&ab5500_driver); -} - -subsys_initcall(ab5500_core_init); -module_exit(ab5500_core_exit); - -MODULE_AUTHOR("Mattias Wallin "); -MODULE_DESCRIPTION("AB5500 core driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/ab5500-debugfs.c b/drivers/mfd/ab5500-debugfs.c deleted file mode 100644 index 72006940937a..000000000000 --- a/drivers/mfd/ab5500-debugfs.c +++ /dev/null @@ -1,807 +0,0 @@ -/* - * Copyright (C) 2011 ST-Ericsson - * License terms: GNU General Public License (GPL) version 2 - * Debugfs support for the AB5500 MFD driver - */ - -#include -#include -#include -#include -#include -#include - -#include "ab5500-core.h" -#include "ab5500-debugfs.h" - -static struct ab5500_i2c_ranges ab5500_reg_ranges[AB5500_NUM_BANKS] = { - [AB5500_BANK_LED] = { - .bankid = AB5500_BANK_LED, - .nranges = 1, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x00, - .last = 0x0C, - .perm = AB5500_PERM_RW, - }, - }, - }, - [AB5500_BANK_ADC] = { - .bankid = AB5500_BANK_ADC, - .nranges = 6, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x1F, - .last = 0x22, - .perm = AB5500_PERM_RO, - }, - { - .first = 0x23, - .last = 0x24, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x26, - .last = 0x2D, - .perm = AB5500_PERM_RO, - }, - { - .first = 0x2F, - .last = 0x34, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x37, - .last = 0x57, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x58, - .last = 0x58, - .perm = AB5500_PERM_RO, - }, - }, - }, - [AB5500_BANK_RTC] = { - .bankid = AB5500_BANK_RTC, - .nranges = 2, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x00, - .last = 0x04, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x06, - .last = 0x0C, - .perm = AB5500_PERM_RW, - }, - }, - }, - [AB5500_BANK_STARTUP] = { - .bankid = AB5500_BANK_STARTUP, - .nranges = 12, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x00, - .last = 0x01, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x1F, - .last = 0x1F, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x2E, - .last = 0x2E, - .perm = AB5500_PERM_RO, - }, - { - .first = 0x2F, - .last = 0x30, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x50, - .last = 0x51, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x60, - .last = 0x61, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x66, - .last = 0x8A, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x8C, - .last = 0x96, - .perm = AB5500_PERM_RW, - }, - { - .first = 0xAA, - .last = 0xB4, - .perm = AB5500_PERM_RW, - }, - { - .first = 0xB7, - .last = 0xBF, - .perm = AB5500_PERM_RW, - }, - { - .first = 0xC1, - .last = 0xCA, - .perm = AB5500_PERM_RW, - }, - { - .first = 0xD3, - .last = 0xE0, - .perm = AB5500_PERM_RW, - }, - }, - }, - [AB5500_BANK_DBI_ECI] = { - .bankid = AB5500_BANK_DBI_ECI, - .nranges = 3, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x00, - .last = 0x07, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x10, - .last = 0x10, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x13, - .last = 0x13, - .perm = AB5500_PERM_RW, - }, - }, - }, - [AB5500_BANK_CHG] = { - .bankid = AB5500_BANK_CHG, - .nranges = 2, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x11, - .last = 0x11, - .perm = AB5500_PERM_RO, - }, - { - .first = 0x12, - .last = 0x1B, - .perm = AB5500_PERM_RW, - }, - }, - }, - [AB5500_BANK_FG_BATTCOM_ACC] = { - .bankid = AB5500_BANK_FG_BATTCOM_ACC, - .nranges = 2, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x00, - .last = 0x0B, - .perm = AB5500_PERM_RO, - }, - { - .first = 0x0C, - .last = 0x10, - .perm = AB5500_PERM_RW, - }, - }, - }, - [AB5500_BANK_USB] = { - .bankid = AB5500_BANK_USB, - .nranges = 12, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x01, - .last = 0x01, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x80, - .last = 0x83, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x87, - .last = 0x8A, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x8B, - .last = 0x8B, - .perm = AB5500_PERM_RO, - }, - { - .first = 0x91, - .last = 0x92, - .perm = AB5500_PERM_RO, - }, - { - .first = 0x93, - .last = 0x93, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x94, - .last = 0x94, - .perm = AB5500_PERM_RO, - }, - { - .first = 0xA8, - .last = 0xB0, - .perm = AB5500_PERM_RO, - }, - { - .first = 0xB2, - .last = 0xB2, - .perm = AB5500_PERM_RO, - }, - { - .first = 0xB4, - .last = 0xBC, - .perm = AB5500_PERM_RO, - }, - { - .first = 0xBF, - .last = 0xBF, - .perm = AB5500_PERM_RO, - }, - { - .first = 0xC1, - .last = 0xC5, - .perm = AB5500_PERM_RO, - }, - }, - }, - [AB5500_BANK_IT] = { - .bankid = AB5500_BANK_IT, - .nranges = 4, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x00, - .last = 0x02, - .perm = AB5500_PERM_RO, - }, - { - .first = 0x20, - .last = 0x36, - .perm = AB5500_PERM_RO, - }, - { - .first = 0x40, - .last = 0x56, - .perm = AB5500_PERM_RO, - }, - { - .first = 0x60, - .last = 0x76, - .perm = AB5500_PERM_RO, - }, - }, - }, - [AB5500_BANK_VDDDIG_IO_I2C_CLK_TST] = { - .bankid = AB5500_BANK_VDDDIG_IO_I2C_CLK_TST, - .nranges = 7, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x02, - .last = 0x02, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x12, - .last = 0x12, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x30, - .last = 0x34, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x40, - .last = 0x44, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x50, - .last = 0x54, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x60, - .last = 0x64, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x70, - .last = 0x74, - .perm = AB5500_PERM_RW, - }, - }, - }, - [AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP] = { - .bankid = AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP, - .nranges = 13, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x01, - .last = 0x01, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x02, - .last = 0x02, - .perm = AB5500_PERM_RO, - }, - { - .first = 0x0D, - .last = 0x0F, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x1C, - .last = 0x1C, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x1E, - .last = 0x1E, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x20, - .last = 0x21, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x25, - .last = 0x25, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x28, - .last = 0x2A, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x30, - .last = 0x33, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x40, - .last = 0x43, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x50, - .last = 0x53, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x60, - .last = 0x63, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x70, - .last = 0x73, - .perm = AB5500_PERM_RW, - }, - }, - }, - [AB5500_BANK_VIBRA] = { - .bankid = AB5500_BANK_VIBRA, - .nranges = 2, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x10, - .last = 0x13, - .perm = AB5500_PERM_RW, - }, - { - .first = 0xFE, - .last = 0xFE, - .perm = AB5500_PERM_RW, - }, - }, - }, - [AB5500_BANK_AUDIO_HEADSETUSB] = { - .bankid = AB5500_BANK_AUDIO_HEADSETUSB, - .nranges = 2, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x00, - .last = 0x48, - .perm = AB5500_PERM_RW, - }, - { - .first = 0xEB, - .last = 0xFB, - .perm = AB5500_PERM_RW, - }, - }, - }, - [AB5500_BANK_SIM_USBSIM] = { - .bankid = AB5500_BANK_SIM_USBSIM, - .nranges = 1, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x13, - .last = 0x19, - .perm = AB5500_PERM_RW, - }, - }, - }, - [AB5500_BANK_VDENC] = { - .bankid = AB5500_BANK_VDENC, - .nranges = 12, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x00, - .last = 0x08, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x09, - .last = 0x09, - .perm = AB5500_PERM_RO, - }, - { - .first = 0x0A, - .last = 0x12, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x15, - .last = 0x19, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x1B, - .last = 0x21, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x27, - .last = 0x2C, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x41, - .last = 0x41, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x45, - .last = 0x5B, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x5D, - .last = 0x5D, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x69, - .last = 0x69, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x6C, - .last = 0x6D, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x80, - .last = 0x81, - .perm = AB5500_PERM_RW, - }, - }, - }, -}; - -static int ab5500_registers_print(struct seq_file *s, void *p) -{ - struct ab5500 *ab = s->private; - unsigned int i; - u8 bank = (u8)ab->debug_bank; - - seq_printf(s, "ab5500 register values:\n"); - for (bank = 0; bank < AB5500_NUM_BANKS; bank++) { - seq_printf(s, " bank %u, %s (0x%x):\n", bank, - bankinfo[bank].name, - bankinfo[bank].slave_addr); - for (i = 0; i < ab5500_reg_ranges[bank].nranges; i++) { - u8 reg; - int err; - - for (reg = ab5500_reg_ranges[bank].range[i].first; - reg <= ab5500_reg_ranges[bank].range[i].last; - reg++) { - u8 value; - - err = ab5500_get_register_interruptible_raw(ab, - bank, reg, - &value); - if (err < 0) { - dev_err(ab->dev, "get_reg failed %d" - "bank 0x%x reg 0x%x\n", - err, bank, reg); - return err; - } - - err = seq_printf(s, "[%d/0x%02X]: 0x%02X\n", - bank, reg, value); - if (err < 0) { - dev_err(ab->dev, - "seq_printf overflow\n"); - /* - * Error is not returned here since - * the output is wanted in any case - */ - return 0; - } - } - } - } - return 0; -} - -static int ab5500_registers_open(struct inode *inode, struct file *file) -{ - return single_open(file, ab5500_registers_print, inode->i_private); -} - -static const struct file_operations ab5500_registers_fops = { - .open = ab5500_registers_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .owner = THIS_MODULE, -}; - -static int ab5500_bank_print(struct seq_file *s, void *p) -{ - struct ab5500 *ab = s->private; - - seq_printf(s, "%d\n", ab->debug_bank); - return 0; -} - -static int ab5500_bank_open(struct inode *inode, struct file *file) -{ - return single_open(file, ab5500_bank_print, inode->i_private); -} - -static ssize_t ab5500_bank_write(struct file *file, - const char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct ab5500 *ab = ((struct seq_file *)(file->private_data))->private; - char buf[32]; - int buf_size; - unsigned long user_bank; - int err; - - /* Get userspace string and assure termination */ - buf_size = min(count, (sizeof(buf) - 1)); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - buf[buf_size] = 0; - - err = strict_strtoul(buf, 0, &user_bank); - if (err) - return -EINVAL; - - if (user_bank >= AB5500_NUM_BANKS) { - dev_err(ab->dev, - "debugfs error input > number of banks\n"); - return -EINVAL; - } - - ab->debug_bank = user_bank; - - return buf_size; -} - -static int ab5500_address_print(struct seq_file *s, void *p) -{ - struct ab5500 *ab = s->private; - - seq_printf(s, "0x%02X\n", ab->debug_address); - return 0; -} - -static int ab5500_address_open(struct inode *inode, struct file *file) -{ - return single_open(file, ab5500_address_print, inode->i_private); -} - -static ssize_t ab5500_address_write(struct file *file, - const char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct ab5500 *ab = ((struct seq_file *)(file->private_data))->private; - char buf[32]; - int buf_size; - unsigned long user_address; - int err; - - /* Get userspace string and assure termination */ - buf_size = min(count, (sizeof(buf) - 1)); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - buf[buf_size] = 0; - - err = strict_strtoul(buf, 0, &user_address); - if (err) - return -EINVAL; - if (user_address > 0xff) { - dev_err(ab->dev, - "debugfs error input > 0xff\n"); - return -EINVAL; - } - ab->debug_address = user_address; - return buf_size; -} - -static int ab5500_val_print(struct seq_file *s, void *p) -{ - struct ab5500 *ab = s->private; - int err; - u8 regvalue; - - err = ab5500_get_register_interruptible_raw(ab, (u8)ab->debug_bank, - (u8)ab->debug_address, ®value); - if (err) { - dev_err(ab->dev, "get_reg failed %d, bank 0x%x" - ", reg 0x%x\n", err, ab->debug_bank, - ab->debug_address); - return -EINVAL; - } - seq_printf(s, "0x%02X\n", regvalue); - - return 0; -} - -static int ab5500_val_open(struct inode *inode, struct file *file) -{ - return single_open(file, ab5500_val_print, inode->i_private); -} - -static ssize_t ab5500_val_write(struct file *file, - const char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct ab5500 *ab = ((struct seq_file *)(file->private_data))->private; - char buf[32]; - int buf_size; - unsigned long user_val; - int err; - u8 regvalue; - - /* Get userspace string and assure termination */ - buf_size = min(count, (sizeof(buf)-1)); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - buf[buf_size] = 0; - - err = strict_strtoul(buf, 0, &user_val); - if (err) - return -EINVAL; - if (user_val > 0xff) { - dev_err(ab->dev, - "debugfs error input > 0xff\n"); - return -EINVAL; - } - err = ab5500_mask_and_set_register_interruptible_raw( - ab, (u8)ab->debug_bank, - (u8)ab->debug_address, 0xFF, (u8)user_val); - if (err) - return -EINVAL; - - ab5500_get_register_interruptible_raw(ab, (u8)ab->debug_bank, - (u8)ab->debug_address, ®value); - if (err) - return -EINVAL; - - return buf_size; -} - -static const struct file_operations ab5500_bank_fops = { - .open = ab5500_bank_open, - .write = ab5500_bank_write, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .owner = THIS_MODULE, -}; - -static const struct file_operations ab5500_address_fops = { - .open = ab5500_address_open, - .write = ab5500_address_write, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .owner = THIS_MODULE, -}; - -static const struct file_operations ab5500_val_fops = { - .open = ab5500_val_open, - .write = ab5500_val_write, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .owner = THIS_MODULE, -}; - -static struct dentry *ab5500_dir; -static struct dentry *ab5500_reg_file; -static struct dentry *ab5500_bank_file; -static struct dentry *ab5500_address_file; -static struct dentry *ab5500_val_file; - -void __init ab5500_setup_debugfs(struct ab5500 *ab) -{ - ab->debug_bank = AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP; - ab->debug_address = AB5500_CHIP_ID; - - ab5500_dir = debugfs_create_dir("ab5500", NULL); - if (!ab5500_dir) - goto exit_no_debugfs; - - ab5500_reg_file = debugfs_create_file("all-bank-registers", - S_IRUGO, ab5500_dir, ab, &ab5500_registers_fops); - if (!ab5500_reg_file) - goto exit_destroy_dir; - - ab5500_bank_file = debugfs_create_file("register-bank", - (S_IRUGO | S_IWUGO), ab5500_dir, ab, &ab5500_bank_fops); - if (!ab5500_bank_file) - goto exit_destroy_reg; - - ab5500_address_file = debugfs_create_file("register-address", - (S_IRUGO | S_IWUGO), ab5500_dir, ab, &ab5500_address_fops); - if (!ab5500_address_file) - goto exit_destroy_bank; - - ab5500_val_file = debugfs_create_file("register-value", - (S_IRUGO | S_IWUGO), ab5500_dir, ab, &ab5500_val_fops); - if (!ab5500_val_file) - goto exit_destroy_address; - - return; - -exit_destroy_address: - debugfs_remove(ab5500_address_file); -exit_destroy_bank: - debugfs_remove(ab5500_bank_file); -exit_destroy_reg: - debugfs_remove(ab5500_reg_file); -exit_destroy_dir: - debugfs_remove(ab5500_dir); -exit_no_debugfs: - dev_err(ab->dev, "failed to create debugfs entries.\n"); - return; -} - -void __exit ab5500_remove_debugfs(void) -{ - debugfs_remove(ab5500_val_file); - debugfs_remove(ab5500_address_file); - debugfs_remove(ab5500_bank_file); - debugfs_remove(ab5500_reg_file); - debugfs_remove(ab5500_dir); -} diff --git a/drivers/mfd/ab5500-debugfs.h b/drivers/mfd/ab5500-debugfs.h deleted file mode 100644 index 7330a9b6afa6..000000000000 --- a/drivers/mfd/ab5500-debugfs.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright (C) 2011 ST-Ericsson - * License terms: GNU General Public License (GPL) version 2 - * Debugfs interface to the AB5500 core driver - */ - -#ifdef CONFIG_DEBUG_FS - -void ab5500_setup_debugfs(struct ab5500 *ab); -void ab5500_remove_debugfs(void); - -#else /* !CONFIG_DEBUG_FS */ - -static inline void ab5500_setup_debugfs(struct ab5500 *ab) -{ -} - -static inline void ab5500_remove_debugfs(void) -{ -} - -#endif -- cgit v1.2.3 From 2da35193dc81b574001a47347f41c4922b1266d3 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 22 Dec 2011 10:37:33 +0200 Subject: OMAPDSS: panel-dvi: add PD gpio handling The driver for the TFP410 chip should handle the power-down signal of the chip, instead of the current way of handling it in the board files. This patch adds power_down_gpio into the device's platform data, and adds the necessary code in the driver to request and handle the GPIO. Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/displays/panel-dvi.c | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) (limited to 'drivers') diff --git a/drivers/video/omap2/displays/panel-dvi.c b/drivers/video/omap2/displays/panel-dvi.c index 03eb14af33e0..876b7989ecb4 100644 --- a/drivers/video/omap2/displays/panel-dvi.c +++ b/drivers/video/omap2/displays/panel-dvi.c @@ -21,6 +21,7 @@ #include #include