From 7d7275b3e866cf8092bd12553ec53ba26864f7bb Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Thu, 28 Jan 2021 21:15:48 +0200 Subject: bus: omap_l3_noc: mark l3 irqs as IRQF_NO_THREAD The main purpose of l3 IRQs is to catch OCP bus access errors and identify corresponding code places by showing call stack, so it's important to handle L3 interconnect errors as fast as possible. On RT these IRQs will became threaded and will be scheduled much more late from the moment actual error occurred so showing completely useless information. Hence, mark l3 IRQs as IRQF_NO_THREAD so they will not be forced threaded on RT or if force_irqthreads = true. Fixes: 0ee7261c9212 ("drivers: bus: Move the OMAP interconnect driver to drivers/bus/") Signed-off-by: Grygorii Strashko Signed-off-by: Tony Lindgren --- drivers/bus/omap_l3_noc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/bus/omap_l3_noc.c b/drivers/bus/omap_l3_noc.c index b040447575ad..dcfb32ee5cb6 100644 --- a/drivers/bus/omap_l3_noc.c +++ b/drivers/bus/omap_l3_noc.c @@ -285,7 +285,7 @@ static int omap_l3_probe(struct platform_device *pdev) */ l3->debug_irq = platform_get_irq(pdev, 0); ret = devm_request_irq(l3->dev, l3->debug_irq, l3_interrupt_handler, - 0x0, "l3-dbg-irq", l3); + IRQF_NO_THREAD, "l3-dbg-irq", l3); if (ret) { dev_err(l3->dev, "request_irq failed for %d\n", l3->debug_irq); @@ -294,7 +294,7 @@ static int omap_l3_probe(struct platform_device *pdev) l3->app_irq = platform_get_irq(pdev, 1); ret = devm_request_irq(l3->dev, l3->app_irq, l3_interrupt_handler, - 0x0, "l3-app-irq", l3); + IRQF_NO_THREAD, "l3-app-irq", l3); if (ret) dev_err(l3->dev, "request_irq failed for %d\n", l3->app_irq); -- cgit v1.2.3 From a249ca66d15fa4b54dc6deaff4155df3db1308e1 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 10 Feb 2021 10:37:51 +0200 Subject: soc: ti: omap-prm: Fix reboot issue with invalid pcie reset map for dra7 Yongqin Liu reported an issue where reboot hangs on beagleboard-x15. This started happening after commit 7078a5ba7a58 ("soc: ti: omap-prm: Fix boot time errors for rst_map_012 bits 0 and 1"). We now assert any 012 type resets on init to prevent unconfigured accelerator MMUs getting enabled on init depending on the bootloader or kexec configured state. Turns out that we now also wrongly assert dra7 l3init domain PCIe reset bits causing a hang during reboot. Let's fix the l3init reset bits to use a 01 map instead of 012 map. There are only two rstctrl bits and not three. This is documented in TRM "Table 3-1647. RM_PCIESS_RSTCTRL". Fixes: 5a68c87afde0 ("soc: ti: omap-prm: dra7: add genpd support for remaining PRM instances") Fixes: 7078a5ba7a58 ("soc: ti: omap-prm: Fix boot time errors for rst_map_012 bits 0 and 1") Cc: Kishon Vijay Abraham I Reported-by: Yongqin Liu Signed-off-by: Tony Lindgren --- drivers/soc/ti/omap_prm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/soc/ti/omap_prm.c b/drivers/soc/ti/omap_prm.c index bf1468e5bccb..17ea6a74a988 100644 --- a/drivers/soc/ti/omap_prm.c +++ b/drivers/soc/ti/omap_prm.c @@ -332,7 +332,7 @@ static const struct omap_prm_data dra7_prm_data[] = { { .name = "l3init", .base = 0x4ae07300, .pwrstctrl = 0x0, .pwrstst = 0x4, .dmap = &omap_prm_alwon, - .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_012, + .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01, .clkdm_name = "pcie" }, { -- cgit v1.2.3 From a7b5d7c4969aba8d1f04c29048906abaa71fb6a9 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 18 Feb 2021 13:06:57 +0200 Subject: bus: ti-sysc: Fix warning on unbind if reset is not deasserted We currently get thefollowing on driver unbind if a reset is configured and asserted: WARNING: CPU: 0 PID: 993 at drivers/reset/core.c:432 reset_control_assert ... (reset_control_assert) from [] (sysc_remove+0x190/0x1e4) (sysc_remove) from [] (platform_remove+0x24/0x3c) (platform_remove) from [] (__device_release_driver+0x154/0x214) (__device_release_driver) from [] (device_driver_detach+0x3c/0x8c) (device_driver_detach) from [] (unbind_store+0x60/0xd4) (unbind_store) from [] (kernfs_fop_write_iter+0x10c/0x1cc) Let's fix it by checking the reset status. Signed-off-by: Tony Lindgren --- drivers/bus/ti-sysc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index a27d751cf219..3d74f237f005 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -3053,7 +3053,9 @@ static int sysc_remove(struct platform_device *pdev) pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); - reset_control_assert(ddata->rsts); + + if (!reset_control_status(ddata->rsts)) + reset_control_assert(ddata->rsts); unprepare: sysc_unprepare(ddata); -- cgit v1.2.3 From effe89e40037038db7711bdab5d3401fe297d72c Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 18 Feb 2021 13:46:33 +0200 Subject: soc: ti: omap-prm: Fix occasional abort on reset deassert for dra7 iva On reset deassert, we must wait a bit after the rstst bit change before we allow clockdomain autoidle again. Otherwise we get the following oops sometimes on dra7 with iva: Unhandled fault: imprecise external abort (0x1406) at 0x00000000 44000000.ocp:L3 Standard Error: MASTER MPU TARGET IVA_CONFIG (Read Link): At Address: 0x0005A410 : Data Access in User mode during Functional access Internal error: : 1406 [#1] SMP ARM ... (sysc_write_sysconfig) from [] (sysc_enable_module+0xcc/0x260) (sysc_enable_module) from [] (sysc_runtime_resume+0xc8/0x174) (sysc_runtime_resume) from [] (genpd_runtime_resume+0x94/0x224) (genpd_runtime_resume) from [] (__rpm_callback+0xd8/0x180) It is unclear what all devices this might affect, but presumably other devices with the rstst bit too can be affected. So let's just enable the delay for all the devices with rstst bit for now. Later on we may want to limit the list to the know affected devices if needed. Fixes: d30cd83f6853 ("soc: ti: omap-prm: add support for denying idle for reset clockdomain") Reported-by: Yongqin Liu Signed-off-by: Tony Lindgren --- drivers/soc/ti/omap_prm.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/soc/ti/omap_prm.c b/drivers/soc/ti/omap_prm.c index 17ea6a74a988..51143a68a889 100644 --- a/drivers/soc/ti/omap_prm.c +++ b/drivers/soc/ti/omap_prm.c @@ -830,8 +830,12 @@ static int omap_reset_deassert(struct reset_controller_dev *rcdev, reset->prm->data->name, id); exit: - if (reset->clkdm) + if (reset->clkdm) { + /* At least dra7 iva needs a delay before clkdm idle */ + if (has_rstst) + udelay(1); pdata->clkdm_allow_idle(reset->clkdm); + } return ret; } -- cgit v1.2.3 From 743c97ca9dc989b0b08ca1fbfd134a83b37fe9ec Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Thu, 11 Feb 2021 14:40:58 -0800 Subject: drm/msm/kms: Use nested locking for crtc lock instead of custom classes We don't need to make up custom lock classes here, we can simply use mutex_lock_nested() and pass in the index of the crtc to the locking APIs instead. This helps lockdep understand that these are really different locks while avoiding having to allocate custom lockdep classes. Cc: Krishna Manikandan Suggested-by: Daniel Vetter Fixes: b3d91800d9ac ("drm/msm: Fix race condition in msm driver with async layer updates") Signed-off-by: Stephen Boyd Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/msm_atomic.c | 7 +++++-- drivers/gpu/drm/msm/msm_kms.h | 8 ++------ 2 files changed, 7 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/msm_atomic.c b/drivers/gpu/drm/msm/msm_atomic.c index 6a326761dc4a..edcaccaa27e6 100644 --- a/drivers/gpu/drm/msm/msm_atomic.c +++ b/drivers/gpu/drm/msm/msm_atomic.c @@ -57,10 +57,13 @@ static void vblank_put(struct msm_kms *kms, unsigned crtc_mask) static void lock_crtcs(struct msm_kms *kms, unsigned int crtc_mask) { + int crtc_index; struct drm_crtc *crtc; - for_each_crtc_mask(kms->dev, crtc, crtc_mask) - mutex_lock(&kms->commit_lock[drm_crtc_index(crtc)]); + for_each_crtc_mask(kms->dev, crtc, crtc_mask) { + crtc_index = drm_crtc_index(crtc); + mutex_lock_nested(&kms->commit_lock[crtc_index], crtc_index); + } } static void unlock_crtcs(struct msm_kms *kms, unsigned int crtc_mask) diff --git a/drivers/gpu/drm/msm/msm_kms.h b/drivers/gpu/drm/msm/msm_kms.h index 4735251a394d..d8151a89e163 100644 --- a/drivers/gpu/drm/msm/msm_kms.h +++ b/drivers/gpu/drm/msm/msm_kms.h @@ -157,7 +157,6 @@ struct msm_kms { * from the crtc's pending_timer close to end of the frame: */ struct mutex commit_lock[MAX_CRTCS]; - struct lock_class_key commit_lock_keys[MAX_CRTCS]; unsigned pending_crtc_mask; struct msm_pending_timer pending_timers[MAX_CRTCS]; }; @@ -167,11 +166,8 @@ static inline int msm_kms_init(struct msm_kms *kms, { unsigned i, ret; - for (i = 0; i < ARRAY_SIZE(kms->commit_lock); i++) { - lockdep_register_key(&kms->commit_lock_keys[i]); - __mutex_init(&kms->commit_lock[i], "&kms->commit_lock[i]", - &kms->commit_lock_keys[i]); - } + for (i = 0; i < ARRAY_SIZE(kms->commit_lock); i++) + mutex_init(&kms->commit_lock[i]); kms->funcs = funcs; -- cgit v1.2.3 From 65aee407a0f5d0548c560e5fc3cad21e51b6f7fd Mon Sep 17 00:00:00 2001 From: Jonathan Marek Date: Mon, 8 Feb 2021 13:55:54 -0500 Subject: drm/msm: fix a6xx_gmu_clear_oob The cleanup patch broke a6xx_gmu_clear_oob, fix it by adding the missing bitshift operation. Fixes: 555c50a4a19b ("drm/msm: Clean up GMU OOB set/clear handling") Signed-off-by: Jonathan Marek Reviewed-by: Jordan Crouse Reviewed-by: Eric Anholt Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c index 9066e98eb8ef..863047b98bf3 100644 --- a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c +++ b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c @@ -339,7 +339,7 @@ void a6xx_gmu_clear_oob(struct a6xx_gmu *gmu, enum a6xx_gmu_oob_state state) else bit = a6xx_gmu_oob_bits[state].ack_new; - gmu_write(gmu, REG_A6XX_GMU_HOST2GMU_INTR_SET, bit); + gmu_write(gmu, REG_A6XX_GMU_HOST2GMU_INTR_SET, 1 << bit); } /* Enable CPU control of SPTP power power collapse */ -- cgit v1.2.3 From 8490f02a3ca45fd1bbcadc243b4db9b69d0e3450 Mon Sep 17 00:00:00 2001 From: Jordan Crouse Date: Tue, 9 Feb 2021 17:52:05 -0700 Subject: drm/msm: a6xx: Make sure the SQE microcode is safe Most a6xx targets have security issues that were fixed with new versions of the microcode(s). Make sure that we are booting with a safe version of the microcode for the target and print a message and error if not. v2: Add more informative error messages and fix typos Signed-off-by: Jordan Crouse Reviewed-by: Akhil P Oommen Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 77 +++++++++++++++++++++++++++++------ 1 file changed, 64 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c index ba8e9d3cf0fe..064b7face504 100644 --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c @@ -522,28 +522,73 @@ static int a6xx_cp_init(struct msm_gpu *gpu) return a6xx_idle(gpu, ring) ? 0 : -EINVAL; } -static void a6xx_ucode_check_version(struct a6xx_gpu *a6xx_gpu, +/* + * Check that the microcode version is new enough to include several key + * security fixes. Return true if the ucode is safe. + */ +static bool a6xx_ucode_check_version(struct a6xx_gpu *a6xx_gpu, struct drm_gem_object *obj) { + struct adreno_gpu *adreno_gpu = &a6xx_gpu->base; + struct msm_gpu *gpu = &adreno_gpu->base; u32 *buf = msm_gem_get_vaddr(obj); + bool ret = false; if (IS_ERR(buf)) - return; + return false; /* - * If the lowest nibble is 0xa that is an indication that this microcode - * has been patched. The actual version is in dword [3] but we only care - * about the patchlevel which is the lowest nibble of dword [3] - * - * Otherwise check that the firmware is greater than or equal to 1.90 - * which was the first version that had this fix built in + * Targets up to a640 (a618, a630 and a640) need to check for a + * microcode version that is patched to support the whereami opcode or + * one that is new enough to include it by default. */ - if (((buf[0] & 0xf) == 0xa) && (buf[2] & 0xf) >= 1) - a6xx_gpu->has_whereami = true; - else if ((buf[0] & 0xfff) > 0x190) - a6xx_gpu->has_whereami = true; + if (adreno_is_a618(adreno_gpu) || adreno_is_a630(adreno_gpu) || + adreno_is_a640(adreno_gpu)) { + /* + * If the lowest nibble is 0xa that is an indication that this + * microcode has been patched. The actual version is in dword + * [3] but we only care about the patchlevel which is the lowest + * nibble of dword [3] + * + * Otherwise check that the firmware is greater than or equal + * to 1.90 which was the first version that had this fix built + * in + */ + if ((((buf[0] & 0xf) == 0xa) && (buf[2] & 0xf) >= 1) || + (buf[0] & 0xfff) >= 0x190) { + a6xx_gpu->has_whereami = true; + ret = true; + goto out; + } + DRM_DEV_ERROR(&gpu->pdev->dev, + "a630 SQE ucode is too old. Have version %x need at least %x\n", + buf[0] & 0xfff, 0x190); + } else { + /* + * a650 tier targets don't need whereami but still need to be + * equal to or newer than 1.95 for other security fixes + */ + if (adreno_is_a650(adreno_gpu)) { + if ((buf[0] & 0xfff) >= 0x195) { + ret = true; + goto out; + } + + DRM_DEV_ERROR(&gpu->pdev->dev, + "a650 SQE ucode is too old. Have version %x need at least %x\n", + buf[0] & 0xfff, 0x195); + } + + /* + * When a660 is added those targets should return true here + * since those have all the critical security fixes built in + * from the start + */ + } +out: msm_gem_put_vaddr(obj); + return ret; } static int a6xx_ucode_init(struct msm_gpu *gpu) @@ -566,7 +611,13 @@ static int a6xx_ucode_init(struct msm_gpu *gpu) } msm_gem_object_set_name(a6xx_gpu->sqe_bo, "sqefw"); - a6xx_ucode_check_version(a6xx_gpu, a6xx_gpu->sqe_bo); + if (!a6xx_ucode_check_version(a6xx_gpu, a6xx_gpu->sqe_bo)) { + msm_gem_unpin_iova(a6xx_gpu->sqe_bo, gpu->aspace); + drm_gem_object_put(a6xx_gpu->sqe_bo); + + a6xx_gpu->sqe_bo = NULL; + return -EPERM; + } } gpu_write64(gpu, REG_A6XX_CP_SQE_INSTR_BASE_LO, -- cgit v1.2.3 From 7bf168c8fe8c6166b5dc10005fe7f250164da0ad Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Fri, 26 Feb 2021 16:26:01 -0800 Subject: drm/msm: Fix speed-bin support not to access outside valid memory When running the latest kernel on an sc7180 with KASAN I got this splat: BUG: KASAN: slab-out-of-bounds in a6xx_gpu_init+0x618/0x644 Read of size 4 at addr ffffff8088f36100 by task kworker/7:1/58 CPU: 7 PID: 58 Comm: kworker/7:1 Not tainted 5.11.0+ #3 Hardware name: Google Lazor (rev1 - 2) with LTE (DT) Workqueue: events deferred_probe_work_func Call trace: dump_backtrace+0x0/0x3a8 show_stack+0x24/0x30 dump_stack+0x174/0x1e0 print_address_description+0x70/0x2e4 kasan_report+0x178/0x1bc __asan_report_load4_noabort+0x44/0x50 a6xx_gpu_init+0x618/0x644 adreno_bind+0x26c/0x438 This is because the speed bin is defined like this: gpu_speed_bin: gpu_speed_bin@1d2 { reg = <0x1d2 0x2>; bits = <5 8>; }; As you can see the "length" is 2 bytes. That means that the nvmem subsystem allocates only 2 bytes. The GPU code, however, was casting the pointer allocated by nvmem to a (u32 *) and dereferencing. That's not so good. Let's fix this to just use the nvmem_cell_read_u16() accessor function which simplifies things and also gets rid of the splat. Let's also put an explicit conversion from little endian in place just to make things clear. The nvmem subsystem today is assuming little endian and this makes it clear. Specifically, the way the above sc7180 cell is interpreted: NVMEM: +--------+--------+--------+--------+--------+ | ...... | 0x1d3 | 0x1d2 | ...... | 0x000 | +--------+--------+--------+--------+--------+ ^ ^ msb lsb You can see that the least significant data is at the lower address which is little endian. NOTE: someone who is truly paying attention might wonder about me picking the "u16" version of this accessor instead of the "u8" (since the value is 8 bits big) or the u32 version (just for fun). At the moment you need to pick the accessor that exactly matches the length the cell was specified as in the device tree. Hopefully future patches to the nvmem subsystem will fix this. Fixes: fe7952c629da ("drm/msm: Add speed-bin support to a618 gpu") Signed-off-by: Douglas Anderson Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 31 ++++++++----------------------- 1 file changed, 8 insertions(+), 23 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c index 064b7face504..690409ca8a18 100644 --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c @@ -1401,35 +1401,20 @@ static int a6xx_set_supported_hw(struct device *dev, struct a6xx_gpu *a6xx_gpu, u32 revn) { struct opp_table *opp_table; - struct nvmem_cell *cell; u32 supp_hw = UINT_MAX; - void *buf; - - cell = nvmem_cell_get(dev, "speed_bin"); - /* - * -ENOENT means that the platform doesn't support speedbin which is - * fine - */ - if (PTR_ERR(cell) == -ENOENT) - return 0; - else if (IS_ERR(cell)) { - DRM_DEV_ERROR(dev, - "failed to read speed-bin. Some OPPs may not be supported by hardware"); - goto done; - } + u16 speedbin; + int ret; - buf = nvmem_cell_read(cell, NULL); - if (IS_ERR(buf)) { - nvmem_cell_put(cell); + ret = nvmem_cell_read_u16(dev, "speed_bin", &speedbin); + if (ret) { DRM_DEV_ERROR(dev, - "failed to read speed-bin. Some OPPs may not be supported by hardware"); + "failed to read speed-bin (%d). Some OPPs may not be supported by hardware", + ret); goto done; } + speedbin = le16_to_cpu(speedbin); - supp_hw = fuse_to_supp_hw(dev, revn, *((u32 *) buf)); - - kfree(buf); - nvmem_cell_put(cell); + supp_hw = fuse_to_supp_hw(dev, revn, speedbin); done: opp_table = dev_pm_opp_set_supported_hw(dev, &supp_hw, 1); -- cgit v1.2.3 From edbea922025169c0e5cdca5ebf7bf5374cc5566c Mon Sep 17 00:00:00 2001 From: Maciej Fijalkowski Date: Wed, 3 Mar 2021 16:29:03 +0100 Subject: veth: Store queue_mapping independently of XDP prog presence Currently, veth_xmit() would call the skb_record_rx_queue() only when there is XDP program loaded on peer interface in native mode. If peer has XDP prog in generic mode, then netif_receive_generic_xdp() has a call to netif_get_rxqueue(skb), so for multi-queue veth it will not be possible to grab a correct rxq. To fix that, store queue_mapping independently of XDP prog presence on peer interface. Fixes: 638264dc9022 ("veth: Support per queue XDP ring") Signed-off-by: Maciej Fijalkowski Signed-off-by: Daniel Borkmann Acked-by: Toshiaki Makita Link: https://lore.kernel.org/bpf/20210303152903.11172-1-maciej.fijalkowski@intel.com --- drivers/net/veth.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/veth.c b/drivers/net/veth.c index aa1a66ad2ce5..34e49c75db42 100644 --- a/drivers/net/veth.c +++ b/drivers/net/veth.c @@ -302,8 +302,7 @@ static netdev_tx_t veth_xmit(struct sk_buff *skb, struct net_device *dev) if (rxq < rcv->real_num_rx_queues) { rq = &rcv_priv->rq[rxq]; rcv_xdp = rcu_access_pointer(rq->xdp_prog); - if (rcv_xdp) - skb_record_rx_queue(skb, rxq); + skb_record_rx_queue(skb, rxq); } skb_tx_timestamp(skb); -- cgit v1.2.3 From 56678a5f44ef5f0ad9a67194bbee2280c6286534 Mon Sep 17 00:00:00 2001 From: Alban Bedel Date: Mon, 22 Feb 2021 15:15:59 +0100 Subject: platform/x86: intel-hid: Support Lenovo ThinkPad X1 Tablet Gen 2 Like a few other system the Lenovo ThinkPad X1 Tablet Gen 2 miss the HEBC method, which prevent the power button from working. Add a quirk to enable the button array on this system family and fix the power button. Signed-off-by: Alban Bedel Tested-by: Alexander Kobel Link: https://lore.kernel.org/r/20210222141559.3775-1-albeu@free.fr Signed-off-by: Hans de Goede --- drivers/platform/x86/intel-hid.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/platform/x86/intel-hid.c b/drivers/platform/x86/intel-hid.c index 2f5b8d09143e..57cc92891a57 100644 --- a/drivers/platform/x86/intel-hid.c +++ b/drivers/platform/x86/intel-hid.c @@ -90,6 +90,13 @@ static const struct dmi_system_id button_array_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "HP Spectre x2 Detachable"), }, }, + { + .ident = "Lenovo ThinkPad X1 Tablet Gen 2", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_FAMILY, "ThinkPad X1 Tablet Gen 2"), + }, + }, { } }; -- cgit v1.2.3 From 30b3f68715595dee7fe4d9bd91a2252c3becdf0a Mon Sep 17 00:00:00 2001 From: Caleb Connolly Date: Sun, 7 Mar 2021 15:12:22 -0800 Subject: Input: s6sy761 - fix coordinate read bit shift The touch coordinate register contains the following: byte 3 byte 2 byte 1 +--------+--------+ +-----------------+ +-----------------+ | | | | | | | | X[3:0] | Y[3:0] | | Y[11:4] | | X[11:4] | | | | | | | | +--------+--------+ +-----------------+ +-----------------+ Bytes 2 and 1 need to be shifted left by 4 bits, the least significant nibble of each is stored in byte 3. Currently they are only being shifted by 3 causing the reported coordinates to be incorrect. This matches downstream examples, and has been confirmed on my device (OnePlus 7 Pro). Fixes: 0145a7141e59 ("Input: add support for the Samsung S6SY761 touchscreen") Signed-off-by: Caleb Connolly Reviewed-by: Andi Shyti Link: https://lore.kernel.org/r/20210305185710.225168-1-caleb@connolly.tech Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/s6sy761.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/input/touchscreen/s6sy761.c b/drivers/input/touchscreen/s6sy761.c index b63d7fdf0cd2..85a1f465c097 100644 --- a/drivers/input/touchscreen/s6sy761.c +++ b/drivers/input/touchscreen/s6sy761.c @@ -145,8 +145,8 @@ static void s6sy761_report_coordinates(struct s6sy761_data *sdata, u8 major = event[4]; u8 minor = event[5]; u8 z = event[6] & S6SY761_MASK_Z; - u16 x = (event[1] << 3) | ((event[3] & S6SY761_MASK_X) >> 4); - u16 y = (event[2] << 3) | (event[3] & S6SY761_MASK_Y); + u16 x = (event[1] << 4) | ((event[3] & S6SY761_MASK_X) >> 4); + u16 y = (event[2] << 4) | (event[3] & S6SY761_MASK_Y); input_mt_slot(sdata->input, tid); -- cgit v1.2.3 From 36b87cf302a4f13f8b4344bcf98f67405a145e2f Mon Sep 17 00:00:00 2001 From: Shou-Chieh Hsu Date: Tue, 2 Mar 2021 11:58:01 +0800 Subject: HID: google: add don USB id Add 1 additional hammer-like device. Signed-off-by: Shou-Chieh Hsu Signed-off-by: Jiri Kosina --- drivers/hid/hid-google-hammer.c | 2 ++ drivers/hid/hid-ids.h | 1 + 2 files changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/hid/hid-google-hammer.c b/drivers/hid/hid-google-hammer.c index d9319622da44..e60c31dd05ff 100644 --- a/drivers/hid/hid-google-hammer.c +++ b/drivers/hid/hid-google-hammer.c @@ -573,6 +573,8 @@ static void hammer_remove(struct hid_device *hdev) } static const struct hid_device_id hammer_devices[] = { + { HID_DEVICE(BUS_USB, HID_GROUP_GENERIC, + USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_DON) }, { HID_DEVICE(BUS_USB, HID_GROUP_GENERIC, USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_HAMMER) }, { HID_DEVICE(BUS_USB, HID_GROUP_GENERIC, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index e42aaae3138f..0b4929258478 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -493,6 +493,7 @@ #define USB_DEVICE_ID_GOOGLE_MASTERBALL 0x503c #define USB_DEVICE_ID_GOOGLE_MAGNEMITE 0x503d #define USB_DEVICE_ID_GOOGLE_MOONBALL 0x5044 +#define USB_DEVICE_ID_GOOGLE_DON 0x5050 #define USB_VENDOR_ID_GOTOP 0x08f2 #define USB_DEVICE_ID_SUPER_Q2 0x007f -- cgit v1.2.3 From 9a0b44fbfea1932196a4879b44a37dd182e984c5 Mon Sep 17 00:00:00 2001 From: Luke D Jones Date: Fri, 19 Feb 2021 10:10:02 +1300 Subject: HID: asus: Add support for 2021 ASUS N-Key keyboard Some new 2021 version of ASUS gamer laptops are using an updated N-Key keyboard with the PID of 0x19b6. This version is using the same init sequence and brightness control as the 0x1866 keyboard. Signed-off-by: Luke D Jones Signed-off-by: Jiri Kosina --- drivers/hid/hid-asus.c | 3 +++ drivers/hid/hid-ids.h | 1 + 2 files changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/hid/hid-asus.c b/drivers/hid/hid-asus.c index 1dfe184ebf5a..2ab22b925941 100644 --- a/drivers/hid/hid-asus.c +++ b/drivers/hid/hid-asus.c @@ -1221,6 +1221,9 @@ static const struct hid_device_id asus_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_ROG_NKEY_KEYBOARD), QUIRK_USE_KBD_BACKLIGHT | QUIRK_ROG_NKEY_KEYBOARD }, + { HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, + USB_DEVICE_ID_ASUSTEK_ROG_NKEY_KEYBOARD2), + QUIRK_USE_KBD_BACKLIGHT | QUIRK_ROG_NKEY_KEYBOARD }, { HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_T100TA_KEYBOARD), QUIRK_T100_KEYBOARD | QUIRK_NO_CONSUMER_USAGES }, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 0b4929258478..67fd8a2f5aba 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -194,6 +194,7 @@ #define USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD2 0x1837 #define USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD3 0x1822 #define USB_DEVICE_ID_ASUSTEK_ROG_NKEY_KEYBOARD 0x1866 +#define USB_DEVICE_ID_ASUSTEK_ROG_NKEY_KEYBOARD2 0x19b6 #define USB_DEVICE_ID_ASUSTEK_FX503VD_KEYBOARD 0x1869 #define USB_VENDOR_ID_ATEN 0x0557 -- cgit v1.2.3 From fa8ba6e5dc0e78e409e503ddcfceef5dd96527f4 Mon Sep 17 00:00:00 2001 From: Jia-Ju Bai Date: Thu, 4 Mar 2021 05:19:57 -0800 Subject: HID: alps: fix error return code in alps_input_configured() When input_register_device() fails, no error return code is assigned. To fix this bug, ret is assigned with -ENOENT as error return code. Reported-by: TOTE Robot Signed-off-by: Jia-Ju Bai Signed-off-by: Jiri Kosina --- drivers/hid/hid-alps.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/hid/hid-alps.c b/drivers/hid/hid-alps.c index 3feaece13ade..6b665931147d 100644 --- a/drivers/hid/hid-alps.c +++ b/drivers/hid/hid-alps.c @@ -761,6 +761,7 @@ static int alps_input_configured(struct hid_device *hdev, struct hid_input *hi) if (input_register_device(data->input2)) { input_free_device(input2); + ret = -ENOENT; goto exit; } } -- cgit v1.2.3 From 7c911f9de7abb89f46254d2fecb11dcb4a7a6c30 Mon Sep 17 00:00:00 2001 From: Benjamin Li Date: Mon, 8 Mar 2021 15:09:15 +0200 Subject: interconnect: qcom: msm8939: remove rpm-ids from non-RPM nodes Some nodes are incorrectly marked as RPM-controlled (they have RPM master and slave ids assigned), but are actually controlled by the application CPU instead. The RPM complains when we send requests for resources that it can't control. Let's fix this by replacing the IDs, with the default "-1" in which case no requests are sent. See commit c497f9322af9 ("interconnect: qcom: msm8916: Remove rpm-ids from non-RPM nodes") where this was done for msm8916. Signed-off-by: Benjamin Li Reviewed-by: Jun Nie Link: https://lore.kernel.org/r/20210205015205.22947-3-benl@squareup.com Signed-off-by: Georgi Djakov --- drivers/interconnect/qcom/msm8939.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/interconnect/qcom/msm8939.c b/drivers/interconnect/qcom/msm8939.c index dfbec30ed149..20f31a1b4192 100644 --- a/drivers/interconnect/qcom/msm8939.c +++ b/drivers/interconnect/qcom/msm8939.c @@ -131,7 +131,7 @@ DEFINE_QNODE(mas_pcnoc_sdcc_1, MSM8939_MASTER_SDCC_1, 8, -1, -1, MSM8939_PNOC_IN DEFINE_QNODE(mas_pcnoc_sdcc_2, MSM8939_MASTER_SDCC_2, 8, -1, -1, MSM8939_PNOC_INT_1); DEFINE_QNODE(mas_qdss_bam, MSM8939_MASTER_QDSS_BAM, 8, -1, -1, MSM8939_SNOC_QDSS_INT); DEFINE_QNODE(mas_qdss_etr, MSM8939_MASTER_QDSS_ETR, 8, -1, -1, MSM8939_SNOC_QDSS_INT); -DEFINE_QNODE(mas_snoc_cfg, MSM8939_MASTER_SNOC_CFG, 4, 20, -1, MSM8939_SLAVE_SRVC_SNOC); +DEFINE_QNODE(mas_snoc_cfg, MSM8939_MASTER_SNOC_CFG, 4, -1, -1, MSM8939_SLAVE_SRVC_SNOC); DEFINE_QNODE(mas_spdm, MSM8939_MASTER_SPDM, 4, -1, -1, MSM8939_PNOC_MAS_0); DEFINE_QNODE(mas_tcu0, MSM8939_MASTER_TCU0, 16, -1, -1, MSM8939_SLAVE_EBI_CH0, MSM8939_BIMC_SNOC_MAS, MSM8939_SLAVE_AMPSS_L2); DEFINE_QNODE(mas_usb_hs1, MSM8939_MASTER_USB_HS1, 4, -1, -1, MSM8939_PNOC_MAS_1); @@ -156,14 +156,14 @@ DEFINE_QNODE(pcnoc_snoc_mas, MSM8939_PNOC_SNOC_MAS, 8, 29, -1, MSM8939_PNOC_SNOC DEFINE_QNODE(pcnoc_snoc_slv, MSM8939_PNOC_SNOC_SLV, 8, -1, 45, MSM8939_SNOC_INT_0, MSM8939_SNOC_INT_BIMC, MSM8939_SNOC_INT_1); DEFINE_QNODE(qdss_int, MSM8939_SNOC_QDSS_INT, 8, -1, -1, MSM8939_SNOC_INT_0, MSM8939_SNOC_INT_BIMC); DEFINE_QNODE(slv_apps_l2, MSM8939_SLAVE_AMPSS_L2, 16, -1, -1, 0); -DEFINE_QNODE(slv_apss, MSM8939_SLAVE_APSS, 4, -1, 20, 0); +DEFINE_QNODE(slv_apss, MSM8939_SLAVE_APSS, 4, -1, -1, 0); DEFINE_QNODE(slv_audio, MSM8939_SLAVE_LPASS, 4, -1, -1, 0); DEFINE_QNODE(slv_bimc_cfg, MSM8939_SLAVE_BIMC_CFG, 4, -1, -1, 0); DEFINE_QNODE(slv_blsp_1, MSM8939_SLAVE_BLSP_1, 4, -1, -1, 0); DEFINE_QNODE(slv_boot_rom, MSM8939_SLAVE_BOOT_ROM, 4, -1, -1, 0); DEFINE_QNODE(slv_camera_cfg, MSM8939_SLAVE_CAMERA_CFG, 4, -1, -1, 0); -DEFINE_QNODE(slv_cats_0, MSM8939_SLAVE_CATS_128, 16, -1, 106, 0); -DEFINE_QNODE(slv_cats_1, MSM8939_SLAVE_OCMEM_64, 8, -1, 107, 0); +DEFINE_QNODE(slv_cats_0, MSM8939_SLAVE_CATS_128, 16, -1, -1, 0); +DEFINE_QNODE(slv_cats_1, MSM8939_SLAVE_OCMEM_64, 8, -1, -1, 0); DEFINE_QNODE(slv_clk_ctl, MSM8939_SLAVE_CLK_CTL, 4, -1, -1, 0); DEFINE_QNODE(slv_crypto_0_cfg, MSM8939_SLAVE_CRYPTO_0_CFG, 4, -1, -1, 0); DEFINE_QNODE(slv_dehr_cfg, MSM8939_SLAVE_DEHR_CFG, 4, -1, -1, 0); @@ -187,20 +187,20 @@ DEFINE_QNODE(slv_sdcc_2, MSM8939_SLAVE_SDCC_2, 4, -1, -1, 0); DEFINE_QNODE(slv_security, MSM8939_SLAVE_SECURITY, 4, -1, -1, 0); DEFINE_QNODE(slv_snoc_cfg, MSM8939_SLAVE_SNOC_CFG, 4, -1, -1, 0); DEFINE_QNODE(slv_spdm, MSM8939_SLAVE_SPDM, 4, -1, -1, 0); -DEFINE_QNODE(slv_srvc_snoc, MSM8939_SLAVE_SRVC_SNOC, 8, -1, 29, 0); +DEFINE_QNODE(slv_srvc_snoc, MSM8939_SLAVE_SRVC_SNOC, 8, -1, -1, 0); DEFINE_QNODE(slv_tcsr, MSM8939_SLAVE_TCSR, 4, -1, -1, 0); DEFINE_QNODE(slv_tlmm, MSM8939_SLAVE_TLMM, 4, -1, -1, 0); DEFINE_QNODE(slv_usb_hs1, MSM8939_SLAVE_USB_HS1, 4, -1, -1, 0); DEFINE_QNODE(slv_usb_hs2, MSM8939_SLAVE_USB_HS2, 4, -1, -1, 0); DEFINE_QNODE(slv_venus_cfg, MSM8939_SLAVE_VENUS_CFG, 4, -1, -1, 0); -DEFINE_QNODE(snoc_bimc_0_mas, MSM8939_SNOC_BIMC_0_MAS, 16, 3, -1, MSM8939_SNOC_BIMC_0_SLV); -DEFINE_QNODE(snoc_bimc_0_slv, MSM8939_SNOC_BIMC_0_SLV, 16, -1, 24, MSM8939_SLAVE_EBI_CH0); +DEFINE_QNODE(snoc_bimc_0_mas, MSM8939_SNOC_BIMC_0_MAS, 16, -1, -1, MSM8939_SNOC_BIMC_0_SLV); +DEFINE_QNODE(snoc_bimc_0_slv, MSM8939_SNOC_BIMC_0_SLV, 16, -1, -1, MSM8939_SLAVE_EBI_CH0); DEFINE_QNODE(snoc_bimc_1_mas, MSM8939_SNOC_BIMC_1_MAS, 16, 76, -1, MSM8939_SNOC_BIMC_1_SLV); DEFINE_QNODE(snoc_bimc_1_slv, MSM8939_SNOC_BIMC_1_SLV, 16, -1, 104, MSM8939_SLAVE_EBI_CH0); DEFINE_QNODE(snoc_bimc_2_mas, MSM8939_SNOC_BIMC_2_MAS, 16, -1, -1, MSM8939_SNOC_BIMC_2_SLV); DEFINE_QNODE(snoc_bimc_2_slv, MSM8939_SNOC_BIMC_2_SLV, 16, -1, -1, MSM8939_SLAVE_EBI_CH0); DEFINE_QNODE(snoc_int_0, MSM8939_SNOC_INT_0, 8, 99, 130, MSM8939_SLAVE_QDSS_STM, MSM8939_SLAVE_IMEM, MSM8939_SNOC_PNOC_MAS); -DEFINE_QNODE(snoc_int_1, MSM8939_SNOC_INT_1, 8, 100, 131, MSM8939_SLAVE_APSS, MSM8939_SLAVE_CATS_128, MSM8939_SLAVE_OCMEM_64); +DEFINE_QNODE(snoc_int_1, MSM8939_SNOC_INT_1, 8, -1, -1, MSM8939_SLAVE_APSS, MSM8939_SLAVE_CATS_128, MSM8939_SLAVE_OCMEM_64); DEFINE_QNODE(snoc_int_bimc, MSM8939_SNOC_INT_BIMC, 8, 101, 132, MSM8939_SNOC_BIMC_1_MAS); DEFINE_QNODE(snoc_pcnoc_mas, MSM8939_SNOC_PNOC_MAS, 8, -1, -1, MSM8939_SNOC_PNOC_SLV); DEFINE_QNODE(snoc_pcnoc_slv, MSM8939_SNOC_PNOC_SLV, 8, -1, -1, MSM8939_PNOC_INT_0); -- cgit v1.2.3 From 715ea61532e731c62392221238906704e63d75b6 Mon Sep 17 00:00:00 2001 From: Jia-Ju Bai Date: Mon, 8 Mar 2021 15:09:15 +0200 Subject: interconnect: core: fix error return code of icc_link_destroy() When krealloc() fails and new is NULL, no error return code of icc_link_destroy() is assigned. To fix this bug, ret is assigned with -ENOMEM hen new is NULL. Reported-by: TOTE Robot Signed-off-by: Jia-Ju Bai Link: https://lore.kernel.org/r/20210306132857.17020-1-baijiaju1990@gmail.com Signed-off-by: Georgi Djakov --- drivers/interconnect/core.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/interconnect/core.c b/drivers/interconnect/core.c index 5ad519c9f239..8a1e70e00876 100644 --- a/drivers/interconnect/core.c +++ b/drivers/interconnect/core.c @@ -942,6 +942,8 @@ int icc_link_destroy(struct icc_node *src, struct icc_node *dst) GFP_KERNEL); if (new) src->links = new; + else + ret = -ENOMEM; out: mutex_unlock(&icc_lock); -- cgit v1.2.3 From 2a2b09c867fdac63f430a45051e7bd0c46edc381 Mon Sep 17 00:00:00 2001 From: Douglas Gilbert Date: Sat, 9 Jan 2021 17:36:58 -0500 Subject: HID cp2112: fix support for multiple gpiochips In lk 5.11.0-rc2 connecting a USB based Silicon Labs HID to I2C bridge evaluation board (CP2112EK) causes this warning: gpio gpiochip0: (cp2112_gpio): detected irqchip that is shared with multiple gpiochips: please fix the driver Simply copy what other gpio related drivers do to fix this particular warning: replicate the struct irq_chip object in each device instance rather than have a static object which makes that object (incorrectly) shared by each device. Signed-off-by: Douglas Gilbert Signed-off-by: Jiri Kosina --- drivers/hid/hid-cp2112.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-cp2112.c b/drivers/hid/hid-cp2112.c index 21e15627a461..477baa30889c 100644 --- a/drivers/hid/hid-cp2112.c +++ b/drivers/hid/hid-cp2112.c @@ -161,6 +161,7 @@ struct cp2112_device { atomic_t read_avail; atomic_t xfer_avail; struct gpio_chip gc; + struct irq_chip irq; u8 *in_out_buffer; struct mutex lock; @@ -1175,16 +1176,6 @@ static int cp2112_gpio_irq_type(struct irq_data *d, unsigned int type) return 0; } -static struct irq_chip cp2112_gpio_irqchip = { - .name = "cp2112-gpio", - .irq_startup = cp2112_gpio_irq_startup, - .irq_shutdown = cp2112_gpio_irq_shutdown, - .irq_ack = cp2112_gpio_irq_ack, - .irq_mask = cp2112_gpio_irq_mask, - .irq_unmask = cp2112_gpio_irq_unmask, - .irq_set_type = cp2112_gpio_irq_type, -}; - static int __maybe_unused cp2112_allocate_irq(struct cp2112_device *dev, int pin) { @@ -1339,8 +1330,17 @@ static int cp2112_probe(struct hid_device *hdev, const struct hid_device_id *id) dev->gc.can_sleep = 1; dev->gc.parent = &hdev->dev; + dev->irq.name = "cp2112-gpio"; + dev->irq.irq_startup = cp2112_gpio_irq_startup; + dev->irq.irq_shutdown = cp2112_gpio_irq_shutdown; + dev->irq.irq_ack = cp2112_gpio_irq_ack; + dev->irq.irq_mask = cp2112_gpio_irq_mask; + dev->irq.irq_unmask = cp2112_gpio_irq_unmask; + dev->irq.irq_set_type = cp2112_gpio_irq_type; + dev->irq.flags = IRQCHIP_MASK_ON_SUSPEND; + girq = &dev->gc.irq; - girq->chip = &cp2112_gpio_irqchip; + girq->chip = &dev->irq; /* The event comes from the outside so no parent handler */ girq->parent_handler = NULL; girq->num_parents = 0; -- cgit v1.2.3 From e29c62ffb008829dc8bcc0a2ec438adc25a8255e Mon Sep 17 00:00:00 2001 From: Jiapeng Zhong Date: Wed, 20 Jan 2021 15:34:30 +0800 Subject: HID: wacom: Assign boolean values to a bool variable Fix the following coccicheck warnings: ./drivers/hid/wacom_wac.c:2536:2-6: WARNING: Assignment of 0/1 to bool variable. Reported-by: Abaci Robot Signed-off-by: Jiapeng Zhong Signed-off-by: Jiri Kosina --- drivers/hid/wacom_wac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c index 44d715c12f6a..bdd9ba577150 100644 --- a/drivers/hid/wacom_wac.c +++ b/drivers/hid/wacom_wac.c @@ -2533,7 +2533,7 @@ static void wacom_wac_finger_slot(struct wacom_wac *wacom_wac, !wacom_wac->shared->is_touch_on) { if (!wacom_wac->shared->touch_down) return; - prox = 0; + prox = false; } wacom_wac->hid_data.num_received++; -- cgit v1.2.3 From a9e54f4b62dcfed4432a5a89b1cd5903737f6e83 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 28 Jan 2021 13:12:17 +0100 Subject: AMD_SFH: Removed unused activecontrolstatus member from the amd_mp2_dev struct This value is only used once inside amd_mp2_get_sensor_num(), so there is no need to store this in the amd_mp2_dev struct, amd_mp2_get_sensor_num() can simple use a local variable for this. Fixes: 4f567b9f8141 ("SFH: PCIe driver to add support of AMD sensor fusion hub") Signed-off-by: Hans de Goede Acked-by: Sandeep Singh --- drivers/hid/amd-sfh-hid/amd_sfh_pcie.c | 6 ++++-- drivers/hid/amd-sfh-hid/amd_sfh_pcie.h | 1 - 2 files changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c index dbac16641662..f3cdb4ea33da 100644 --- a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c +++ b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c @@ -76,9 +76,11 @@ void amd_stop_all_sensors(struct amd_mp2_dev *privdata) int amd_mp2_get_sensor_num(struct amd_mp2_dev *privdata, u8 *sensor_id) { int activestatus, num_of_sensors = 0; + u32 activecontrolstatus; + + activecontrolstatus = readl(privdata->mmio + AMD_P2C_MSG3); + activestatus = activecontrolstatus >> 4; - privdata->activecontrolstatus = readl(privdata->mmio + AMD_P2C_MSG3); - activestatus = privdata->activecontrolstatus >> 4; if (ACEL_EN & activestatus) sensor_id[num_of_sensors++] = accel_idx; diff --git a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.h b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.h index 8f8d19b2cfe5..489415f7c22c 100644 --- a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.h +++ b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.h @@ -61,7 +61,6 @@ struct amd_mp2_dev { struct pci_dev *pdev; struct amdtp_cl_data *cl_data; void __iomem *mmio; - u32 activecontrolstatus; }; struct amd_mp2_sensor_info { -- cgit v1.2.3 From 952f7d10c6b1685c6700fb24cf4ecbcf26ede77e Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 28 Jan 2021 13:12:18 +0100 Subject: AMD_SFH: Add sensor_mask module parameter Add a sensor_mask module parameter which can be used to override the sensor-mask read from the activestatus bits of the AMD_P2C_MSG3 registers. Some BIOS-es do not program the activestatus bits, leading to the AMD-SFH driver not registering any HID devices even though the laptop in question does actually have sensors. While at it also fix the wrong indentation of the MAGNO_EN define. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199715 BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1651886 Fixes: 4f567b9f8141 ("SFH: PCIe driver to add support of AMD sensor fusion hub") Suggested-by: Richard Neumann Signed-off-by: Hans de Goede Acked-by: Sandeep Singh --- drivers/hid/amd-sfh-hid/amd_sfh_pcie.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c index f3cdb4ea33da..ab0a9443e252 100644 --- a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c +++ b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c @@ -22,9 +22,13 @@ #define ACEL_EN BIT(0) #define GYRO_EN BIT(1) -#define MAGNO_EN BIT(2) +#define MAGNO_EN BIT(2) #define ALS_EN BIT(19) +static int sensor_mask_override = -1; +module_param_named(sensor_mask, sensor_mask_override, int, 0444); +MODULE_PARM_DESC(sensor_mask, "override the detected sensors mask"); + void amd_start_sensor(struct amd_mp2_dev *privdata, struct amd_mp2_sensor_info info) { union sfh_cmd_param cmd_param; @@ -78,8 +82,12 @@ int amd_mp2_get_sensor_num(struct amd_mp2_dev *privdata, u8 *sensor_id) int activestatus, num_of_sensors = 0; u32 activecontrolstatus; - activecontrolstatus = readl(privdata->mmio + AMD_P2C_MSG3); - activestatus = activecontrolstatus >> 4; + if (sensor_mask_override >= 0) { + activestatus = sensor_mask_override; + } else { + activecontrolstatus = readl(privdata->mmio + AMD_P2C_MSG3); + activestatus = activecontrolstatus >> 4; + } if (ACEL_EN & activestatus) sensor_id[num_of_sensors++] = accel_idx; -- cgit v1.2.3 From 25615e454a0ec198254f17d2ed79b607cb755d0e Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 28 Jan 2021 13:12:19 +0100 Subject: AMD_SFH: Add DMI quirk table for BIOS-es which don't set the activestatus bits Some BIOS-es do not initialize the activestatus bits of the AMD_P2C_MSG3 register. This cause the AMD_SFH driver to not register any sensors even though the laptops in question do have sensors. Add a DMI quirk-table for specifying sensor-mask overrides based on DMI match, to make the sensors work OOTB on these laptop models. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199715 BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1651886 Fixes: 4f567b9f8141 ("SFH: PCIe driver to add support of AMD sensor fusion hub") Signed-off-by: Hans de Goede Acked-by: Sandeep Singh --- drivers/hid/amd-sfh-hid/amd_sfh_pcie.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'drivers') diff --git a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c index ab0a9443e252..ddecc84fd6f0 100644 --- a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c +++ b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include @@ -77,11 +78,34 @@ void amd_stop_all_sensors(struct amd_mp2_dev *privdata) writel(cmd_base.ul, privdata->mmio + AMD_C2P_MSG0); } +static const struct dmi_system_id dmi_sensor_mask_overrides[] = { + { + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "HP ENVY x360 Convertible 13-ag0xxx"), + }, + .driver_data = (void *)(ACEL_EN | MAGNO_EN), + }, + { + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "HP ENVY x360 Convertible 15-cp0xxx"), + }, + .driver_data = (void *)(ACEL_EN | MAGNO_EN), + }, + { } +}; + int amd_mp2_get_sensor_num(struct amd_mp2_dev *privdata, u8 *sensor_id) { int activestatus, num_of_sensors = 0; + const struct dmi_system_id *dmi_id; u32 activecontrolstatus; + if (sensor_mask_override == -1) { + dmi_id = dmi_first_match(dmi_sensor_mask_overrides); + if (dmi_id) + sensor_mask_override = (long)dmi_id->driver_data; + } + if (sensor_mask_override >= 0) { activestatus = sensor_mask_override; } else { -- cgit v1.2.3 From 7029e783027706b427bbfbdf8558252c1dac6fa0 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sun, 3 Jan 2021 14:56:12 +0100 Subject: remoteproc: qcom: pil_info: avoid 64-bit division On 32-bit machines with 64-bit resource_size_t, the driver causes a link failure because of the 64-bit division: arm-linux-gnueabi-ld: drivers/remoteproc/qcom_pil_info.o: in function `qcom_pil_info_store': qcom_pil_info.c:(.text+0x1ec): undefined reference to `__aeabi_uldivmod' Add a cast to an u32 to avoid this. If the resource exceeds 4GB, there are bigger problems. Fixes: 549b67da660d ("remoteproc: qcom: Introduce helper to store pil info in IMEM") Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20210103135628.3702427-1-arnd@kernel.org Signed-off-by: Bjorn Andersson --- drivers/remoteproc/qcom_pil_info.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/remoteproc/qcom_pil_info.c b/drivers/remoteproc/qcom_pil_info.c index 5521c4437ffa..7c007dd7b200 100644 --- a/drivers/remoteproc/qcom_pil_info.c +++ b/drivers/remoteproc/qcom_pil_info.c @@ -56,7 +56,7 @@ static int qcom_pil_info_init(void) memset_io(base, 0, resource_size(&imem)); _reloc.base = base; - _reloc.num_entries = resource_size(&imem) / PIL_RELOC_ENTRY_SIZE; + _reloc.num_entries = (u32)resource_size(&imem) / PIL_RELOC_ENTRY_SIZE; return 0; } -- cgit v1.2.3 From e6d9423d31b2f9bdd0220fd0584e3bb6ed2c4e52 Mon Sep 17 00:00:00 2001 From: Dimitar Dimitrov Date: Wed, 30 Dec 2020 12:50:05 +0200 Subject: remoteproc: pru: Fix loading of GNU Binutils ELF PRU port of GNU Binutils lacks support for separate address spaces. PRU IRAM addresses are marked with artificial offset to differentiate them from DRAM addresses. Hence remoteproc must mask IRAM addresses coming from GNU ELF in order to get the true hardware address. PRU firmware used for testing was the example in: https://github.com/dinuxbg/pru-gcc-examples/tree/master/blinking-led/pru Signed-off-by: Dimitar Dimitrov Link: https://lore.kernel.org/r/20201230105005.30492-1-dimitar@dinux.eu Signed-off-by: Bjorn Andersson --- drivers/remoteproc/pru_rproc.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'drivers') diff --git a/drivers/remoteproc/pru_rproc.c b/drivers/remoteproc/pru_rproc.c index 2667919d76b3..5fad787ba012 100644 --- a/drivers/remoteproc/pru_rproc.c +++ b/drivers/remoteproc/pru_rproc.c @@ -450,6 +450,24 @@ static void *pru_i_da_to_va(struct pru_rproc *pru, u32 da, size_t len) if (len == 0) return NULL; + /* + * GNU binutils do not support multiple address spaces. The GNU + * linker's default linker script places IRAM at an arbitrary high + * offset, in order to differentiate it from DRAM. Hence we need to + * strip the artificial offset in the IRAM addresses coming from the + * ELF file. + * + * The TI proprietary linker would never set those higher IRAM address + * bits anyway. PRU architecture limits the program counter to 16-bit + * word-address range. This in turn corresponds to 18-bit IRAM + * byte-address range for ELF. + * + * Two more bits are added just in case to make the final 20-bit mask. + * Idea is to have a safeguard in case TI decides to add banking + * in future SoCs. + */ + da &= 0xfffff; + if (da >= PRU_IRAM_DA && da + len <= PRU_IRAM_DA + pru->mem_regions[PRU_IOMEM_IRAM].size) { offset = da - PRU_IRAM_DA; -- cgit v1.2.3 From 77e141266c8e72e4a586fe42eaab1b4b047655ed Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 8 Mar 2021 18:49:10 +0200 Subject: pinctrl: intel: Show the GPIO base calculation explicitly During the split of intel_pinctrl_add_padgroups(), the _by_size() variant missed the GPIO base calculations and hence made unable to retrieve proper GPIO number. Assign the gpio_base explicitly in _by_size() variant. While at it, differentiate NOMAP case with the rest in _by_gpps() variant. Fixes: 036e126c72eb ("pinctrl: intel: Split intel_pinctrl_add_padgroups() for better maintenance") Reported-and-tested-by: Maximilian Luz Signed-off-by: Andy Shevchenko Acked-by: Mika Westerberg --- drivers/pinctrl/intel/pinctrl-intel.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/pinctrl/intel/pinctrl-intel.c b/drivers/pinctrl/intel/pinctrl-intel.c index 8085782cd8f9..7283203861ae 100644 --- a/drivers/pinctrl/intel/pinctrl-intel.c +++ b/drivers/pinctrl/intel/pinctrl-intel.c @@ -1357,6 +1357,7 @@ static int intel_pinctrl_add_padgroups_by_gpps(struct intel_pinctrl *pctrl, gpps[i].gpio_base = 0; break; case INTEL_GPIO_BASE_NOMAP: + break; default: break; } @@ -1393,6 +1394,7 @@ static int intel_pinctrl_add_padgroups_by_size(struct intel_pinctrl *pctrl, gpps[i].size = min(gpp_size, npins); npins -= gpps[i].size; + gpps[i].gpio_base = gpps[i].base; gpps[i].padown_num = padown_num; /* -- cgit v1.2.3 From 2d8aaa1720c6128ce263a2afcd3f8ee2e5551af8 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 8 Mar 2021 11:40:30 -0800 Subject: Input: n64joy - fix return value check in n64joy_probe() In case of error, the function devm_platform_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: 3bdffa8ffb45 ("Input: Add N64 controller driver") Reported-by: Hulk Robot Signed-off-by: Wei Yongjun Reviewed-by: Lauri Kasanen Link: https://lore.kernel.org/r/20210308122856.2177071-1-weiyongjun1@huawei.com Signed-off-by: Dmitry Torokhov --- drivers/input/joystick/n64joy.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/input/joystick/n64joy.c b/drivers/input/joystick/n64joy.c index 8bcc529942bc..9dbca366613e 100644 --- a/drivers/input/joystick/n64joy.c +++ b/drivers/input/joystick/n64joy.c @@ -252,8 +252,8 @@ static int __init n64joy_probe(struct platform_device *pdev) mutex_init(&priv->n64joy_mutex); priv->reg_base = devm_platform_ioremap_resource(pdev, 0); - if (!priv->reg_base) { - err = -EINVAL; + if (IS_ERR(priv->reg_base)) { + err = PTR_ERR(priv->reg_base); goto fail; } -- cgit v1.2.3 From 5d5f2919273d1089a00556cad68e7f462f3dd2eb Mon Sep 17 00:00:00 2001 From: Lars Povlsen Date: Wed, 3 Feb 2021 13:38:25 +0100 Subject: pinctrl: microchip-sgpio: Fix wrong register offset for IRQ trigger This patch fixes using a wrong register offset when configuring an IRQ trigger type. Fixes: be2dc859abd4 ("pinctrl: pinctrl-microchip-sgpio: Add irq support (for sparx5)") Reported-by: Gustavo A. R. Silva Signed-off-by: Lars Povlsen Reviewed-by: Gustavo A. R. Silva Link: https://lore.kernel.org/r/20210203123825.611576-1-lars.povlsen@microchip.com Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-microchip-sgpio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pinctrl/pinctrl-microchip-sgpio.c b/drivers/pinctrl/pinctrl-microchip-sgpio.c index f35edb0eac40..c12fa57ebd12 100644 --- a/drivers/pinctrl/pinctrl-microchip-sgpio.c +++ b/drivers/pinctrl/pinctrl-microchip-sgpio.c @@ -572,7 +572,7 @@ static void microchip_sgpio_irq_settype(struct irq_data *data, /* Type value spread over 2 registers sets: low, high bit */ sgpio_clrsetbits(bank->priv, REG_INT_TRIGGER, addr.bit, BIT(addr.port), (!!(type & 0x1)) << addr.port); - sgpio_clrsetbits(bank->priv, REG_INT_TRIGGER + SGPIO_MAX_BITS, addr.bit, + sgpio_clrsetbits(bank->priv, REG_INT_TRIGGER, SGPIO_MAX_BITS + addr.bit, BIT(addr.port), (!!(type & 0x2)) << addr.port); if (type == SGPIO_INT_TRG_LEVEL) -- cgit v1.2.3 From c971af25cda94afe71617790826a86253e88eab0 Mon Sep 17 00:00:00 2001 From: Wang Panzhenzhuan Date: Tue, 23 Feb 2021 18:07:25 +0800 Subject: pinctrl: rockchip: fix restore error in resume The restore in resume should match to suspend which only set for RK3288 SoCs pinctrl. Fixes: 8dca933127024 ("pinctrl: rockchip: save and restore gpio6_c6 pinmux in suspend/resume") Reviewed-by: Jianqun Xu Reviewed-by: Heiko Stuebner Signed-off-by: Wang Panzhenzhuan Signed-off-by: Jianqun Xu Link: https://lore.kernel.org/r/20210223100725.269240-1-jay.xu@rock-chips.com Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-rockchip.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c index aa1a1c850d05..53a0badc6b03 100644 --- a/drivers/pinctrl/pinctrl-rockchip.c +++ b/drivers/pinctrl/pinctrl-rockchip.c @@ -3727,12 +3727,15 @@ static int __maybe_unused rockchip_pinctrl_suspend(struct device *dev) static int __maybe_unused rockchip_pinctrl_resume(struct device *dev) { struct rockchip_pinctrl *info = dev_get_drvdata(dev); - int ret = regmap_write(info->regmap_base, RK3288_GRF_GPIO6C_IOMUX, - rk3288_grf_gpio6c_iomux | - GPIO6C6_SEL_WRITE_ENABLE); + int ret; - if (ret) - return ret; + if (info->ctrl->type == RK3288) { + ret = regmap_write(info->regmap_base, RK3288_GRF_GPIO6C_IOMUX, + rk3288_grf_gpio6c_iomux | + GPIO6C6_SEL_WRITE_ENABLE); + if (ret) + return ret; + } return pinctrl_force_default(info->pctl_dev); } -- cgit v1.2.3 From 5115daa675ccf70497fe56e8916cf738d8212c10 Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Tue, 12 Jan 2021 13:29:14 +0200 Subject: net/mlx5e: Enforce minimum value check for ICOSQ size The ICOSQ size should not go below MLX5E_PARAMS_MINIMUM_LOG_SQ_SIZE. Enforce this where it's missing. Signed-off-by: Tariq Toukan Reviewed-by: Maxim Mikityanskiy Reviewed-by: Saeed Mahameed Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index ec2fcb2a2977..5c8ffa8da6f0 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -2368,8 +2368,9 @@ static u8 mlx5e_build_icosq_log_wq_sz(struct mlx5e_params *params, { switch (params->rq_wq_type) { case MLX5_WQ_TYPE_LINKED_LIST_STRIDING_RQ: - return order_base_2(MLX5E_UMR_WQEBBS) + - mlx5e_get_rq_log_wq_sz(rqp->rqc); + return max_t(u8, MLX5E_PARAMS_MINIMUM_LOG_SQ_SIZE, + order_base_2(MLX5E_UMR_WQEBBS) + + mlx5e_get_rq_log_wq_sz(rqp->rqc)); default: /* MLX5_WQ_TYPE_CYCLIC */ return MLX5E_PARAMS_MINIMUM_LOG_SQ_SIZE; } -- cgit v1.2.3 From d5dd03b26ba49c4ffe67ee1937add82293c19794 Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Tue, 12 Jan 2021 13:21:17 +0200 Subject: net/mlx5e: RX, Mind the MPWQE gaps when calculating offsets Since cited patch, MLX5E_REQUIRED_WQE_MTTS is not a power of two. Hence, usage of MLX5E_LOG_ALIGNED_MPWQE_PPW should be replaced, as it lost some accuracy. Use the designated macro to calculate the number of required MTTs. This makes sure the solution in cited patch works properly. While here, un-inline mlx5e_get_mpwqe_offset(), and remove the unused RQ parameter. Fixes: c3c9402373fe ("net/mlx5e: Add resiliency in Striding RQ mode for packets larger than MTU") Signed-off-by: Tariq Toukan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en.h | 7 ++++--- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 6 +++--- drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 4 ++-- 3 files changed, 9 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h index 7435fe6829b6..304b296fe8b9 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h @@ -92,14 +92,15 @@ struct page_pool; MLX5_MPWRQ_LOG_WQE_SZ - PAGE_SHIFT : 0) #define MLX5_MPWRQ_PAGES_PER_WQE BIT(MLX5_MPWRQ_WQE_PAGE_ORDER) -#define MLX5_MTT_OCTW(npages) (ALIGN(npages, 8) / 2) +#define MLX5_ALIGN_MTTS(mtts) (ALIGN(mtts, 8)) +#define MLX5_ALIGNED_MTTS_OCTW(mtts) ((mtts) / 2) +#define MLX5_MTT_OCTW(mtts) (MLX5_ALIGNED_MTTS_OCTW(MLX5_ALIGN_MTTS(mtts))) /* Add another page to MLX5E_REQUIRED_WQE_MTTS as a buffer between * WQEs, This page will absorb write overflow by the hardware, when * receiving packets larger than MTU. These oversize packets are * dropped by the driver at a later stage. */ -#define MLX5E_REQUIRED_WQE_MTTS (ALIGN(MLX5_MPWRQ_PAGES_PER_WQE + 1, 8)) -#define MLX5E_LOG_ALIGNED_MPWQE_PPW (ilog2(MLX5E_REQUIRED_WQE_MTTS)) +#define MLX5E_REQUIRED_WQE_MTTS (MLX5_ALIGN_MTTS(MLX5_MPWRQ_PAGES_PER_WQE + 1)) #define MLX5E_REQUIRED_MTTS(wqes) (wqes * MLX5E_REQUIRED_WQE_MTTS) #define MLX5E_MAX_RQ_NUM_MTTS \ ((1 << 16) * 2) /* So that MLX5_MTT_OCTW(num_mtts) fits into u16 */ diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 5c8ffa8da6f0..831f5495ff39 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -334,9 +334,9 @@ static int mlx5e_create_rq_umr_mkey(struct mlx5_core_dev *mdev, struct mlx5e_rq rq->wqe_overflow.addr); } -static inline u64 mlx5e_get_mpwqe_offset(struct mlx5e_rq *rq, u16 wqe_ix) +static u64 mlx5e_get_mpwqe_offset(u16 wqe_ix) { - return (wqe_ix << MLX5E_LOG_ALIGNED_MPWQE_PPW) << PAGE_SHIFT; + return MLX5E_REQUIRED_MTTS(wqe_ix) << PAGE_SHIFT; } static void mlx5e_init_frags_partition(struct mlx5e_rq *rq) @@ -577,7 +577,7 @@ static int mlx5e_alloc_rq(struct mlx5e_channel *c, mlx5_wq_ll_get_wqe(&rq->mpwqe.wq, i); u32 byte_count = rq->mpwqe.num_strides << rq->mpwqe.log_stride_sz; - u64 dma_offset = mlx5e_get_mpwqe_offset(rq, i); + u64 dma_offset = mlx5e_get_mpwqe_offset(i); wqe->data[0].addr = cpu_to_be64(dma_offset + rq->buff.headroom); wqe->data[0].byte_count = cpu_to_be32(byte_count); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c index 1b6ad94ebb10..249d8905e644 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c @@ -500,7 +500,6 @@ static int mlx5e_alloc_rx_mpwqe(struct mlx5e_rq *rq, u16 ix) struct mlx5e_icosq *sq = rq->icosq; struct mlx5_wq_cyc *wq = &sq->wq; struct mlx5e_umr_wqe *umr_wqe; - u16 xlt_offset = ix << (MLX5E_LOG_ALIGNED_MPWQE_PPW - 1); u16 pi; int err; int i; @@ -531,7 +530,8 @@ static int mlx5e_alloc_rx_mpwqe(struct mlx5e_rq *rq, u16 ix) umr_wqe->ctrl.opmod_idx_opcode = cpu_to_be32((sq->pc << MLX5_WQE_CTRL_WQE_INDEX_SHIFT) | MLX5_OPCODE_UMR); - umr_wqe->uctrl.xlt_offset = cpu_to_be16(xlt_offset); + umr_wqe->uctrl.xlt_offset = + cpu_to_be16(MLX5_ALIGNED_MTTS_OCTW(MLX5E_REQUIRED_MTTS(ix))); sq->db.wqe_info[pi] = (struct mlx5e_icosq_wqe_info) { .wqe_type = MLX5E_ICOSQ_WQE_UMR_RX, -- cgit v1.2.3 From 354521eebd02db45168b9c8c3795078f90c327b7 Mon Sep 17 00:00:00 2001 From: Aya Levin Date: Sun, 28 Feb 2021 18:40:18 +0200 Subject: net/mlx5e: Accumulate port PTP TX stats with other channels stats In addition to .get_ethtool_stats, add port PTP TX stats to .ndo_get_stats64. Fixes: 145e5637d941 ("net/mlx5e: Add TX PTP port object support") Signed-off-by: Aya Levin Reviewed-by: Tariq Toukan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 831f5495ff39..9e2a30dc5e4f 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -3811,6 +3811,15 @@ void mlx5e_fold_sw_stats64(struct mlx5e_priv *priv, struct rtnl_link_stats64 *s) for (j = 0; j < priv->max_opened_tc; j++) { struct mlx5e_sq_stats *sq_stats = &channel_stats->sq[j]; + s->tx_packets += sq_stats->packets; + s->tx_bytes += sq_stats->bytes; + s->tx_dropped += sq_stats->dropped; + } + } + if (priv->port_ptp_opened) { + for (i = 0; i < priv->max_opened_tc; i++) { + struct mlx5e_sq_stats *sq_stats = &priv->port_ptp_stats.sq[i]; + s->tx_packets += sq_stats->packets; s->tx_bytes += sq_stats->bytes; s->tx_dropped += sq_stats->dropped; -- cgit v1.2.3 From 1c2cdf0b603a3b0c763288ad92e9f3f1555925cf Mon Sep 17 00:00:00 2001 From: Aya Levin Date: Tue, 12 Jan 2021 13:34:29 +0200 Subject: net/mlx5e: Set PTP channel pointer explicitly to NULL When closing the PTP channel, set its pointer explicitly to NULL. PTP channel is opened on demand, the code verify the pointer validity before access. Nullify it when closing the PTP channel to avoid unexpected behavior. Fixes: 145e5637d941 ("net/mlx5e: Add TX PTP port object support") Signed-off-by: Aya Levin Reviewed-by: Tariq Toukan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 9e2a30dc5e4f..66d23cd275c1 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -2503,8 +2503,10 @@ void mlx5e_close_channels(struct mlx5e_channels *chs) { int i; - if (chs->port_ptp) + if (chs->port_ptp) { mlx5e_port_ptp_close(chs->port_ptp); + chs->port_ptp = NULL; + } for (i = 0; i < chs->num; i++) mlx5e_close_channel(chs->c[i]); -- cgit v1.2.3 From e5eb01344e9b09bb9d255b9727449186f7168df8 Mon Sep 17 00:00:00 2001 From: Maxim Mikityanskiy Date: Thu, 11 Feb 2021 15:51:11 +0200 Subject: net/mlx5e: When changing XDP program without reset, take refs for XSK RQs Each RQ (including XSK RQs) takes a reference to the XDP program. When an XDP program is attached or detached, the channels and queues are recreated, however, there is a special flow for changing an active XDP program to another one. In that flow, channels and queues stay alive, but the refcounts of the old and new XDP programs are adjusted. This flow didn't increment refcount by the number of active XSK RQs, and this commit fixes it. Fixes: db05815b36cb ("net/mlx5e: Add XSK zero-copy support") Signed-off-by: Maxim Mikityanskiy Reviewed-by: Tariq Toukan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 66d23cd275c1..6b761fb8d269 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -4695,8 +4695,10 @@ static int mlx5e_xdp_set(struct net_device *netdev, struct bpf_prog *prog) struct mlx5e_channel *c = priv->channels.c[i]; mlx5e_rq_replace_xdp_prog(&c->rq, prog); - if (test_bit(MLX5E_CHANNEL_STATE_XSK, c->state)) + if (test_bit(MLX5E_CHANNEL_STATE_XSK, c->state)) { + bpf_prog_inc(prog); mlx5e_rq_replace_xdp_prog(&c->xskrq, prog); + } } unlock: -- cgit v1.2.3 From 74640f09735f935437bd8df9fe61a66f03eabb34 Mon Sep 17 00:00:00 2001 From: Maxim Mikityanskiy Date: Fri, 29 Jan 2021 14:04:34 +0200 Subject: net/mlx5e: Revert parameters on errors when changing PTP state without reset Port timestamping for PTP can be enabled/disabled while the channels are closed. In that case mlx5e_safe_switch_channels is skipped, and the preactivate hook is called directly. However, if that hook returns an error, the channel parameters must be reverted back to their old values. This commit adds missing handling on this case. Fixes: 145e5637d941 ("net/mlx5e: Add TX PTP port object support") Signed-off-by: Maxim Mikityanskiy Reviewed-by: Tariq Toukan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index abdf721bb264..0e059d5c57ac 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -2014,8 +2014,13 @@ static int set_pflag_tx_port_ts(struct net_device *netdev, bool enable) */ if (!test_bit(MLX5E_STATE_OPENED, &priv->state)) { + struct mlx5e_params old_params; + + old_params = priv->channels.params; priv->channels.params = new_channels.params; err = mlx5e_num_channels_changed(priv); + if (err) + priv->channels.params = old_params; goto out; } -- cgit v1.2.3 From 385d40b042e60aa0b677d7b400a0fefb44bcbaf4 Mon Sep 17 00:00:00 2001 From: Maor Dickman Date: Tue, 16 Feb 2021 13:39:18 +0200 Subject: net/mlx5e: Don't match on Geneve options in case option masks are all zero The cited change added offload support for Geneve options without verifying the validity of the options masks, this caused offload of rules with match on Geneve options with class,type and data masks which are zero to fail. Fix by ignoring the match on Geneve options in case option masks are all zero. Fixes: 9272e3df3023 ("net/mlx5e: Geneve, Add support for encap/decap flows offload") Signed-off-by: Maor Dickman Reviewed-by: Roi Dayan Reviewed-by: Oz Shlomo Reviewed-by: Yevgeny Kliteynik Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_geneve.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_geneve.c b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_geneve.c index e472ed0eacfb..7ed3f9f79f11 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_geneve.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_geneve.c @@ -227,6 +227,10 @@ static int mlx5e_tc_tun_parse_geneve_options(struct mlx5e_priv *priv, option_key = (struct geneve_opt *)&enc_opts.key->data[0]; option_mask = (struct geneve_opt *)&enc_opts.mask->data[0]; + if (option_mask->opt_class == 0 && option_mask->type == 0 && + !memchr_inv(option_mask->opt_data, 0, option_mask->length * 4)) + return 0; + if (option_key->length > max_tlv_option_data_len) { NL_SET_ERR_MSG_MOD(extack, "Matching on GENEVE options: unsupported option len"); -- cgit v1.2.3 From 55affa97d6758b6aeab0bc68f4884c4b5a6828af Mon Sep 17 00:00:00 2001 From: Aya Levin Date: Mon, 1 Mar 2021 17:54:21 +0200 Subject: net/mlx5: Fix turn-off PPS command Fix a bug of uninitialized pin index when trying to turn off PPS out. Fixes: de19cd6cc977 ("net/mlx5: Move some PPS logic into helper functions") Signed-off-by: Aya Levin Reviewed-by: Eran Ben Elisha Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c index b0e129d0f6d8..1e7f26b240de 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c @@ -495,15 +495,15 @@ static int mlx5_perout_configure(struct ptp_clock_info *ptp, return -EINVAL; field_select = MLX5_MTPPS_FS_ENABLE; + pin = ptp_find_pin(clock->ptp, PTP_PF_PEROUT, rq->perout.index); + if (pin < 0) + return -EBUSY; + if (on) { bool rt_mode = mlx5_real_time_mode(mdev); u32 nsec; s64 sec; - pin = ptp_find_pin(clock->ptp, PTP_PF_PEROUT, rq->perout.index); - if (pin < 0) - return -EBUSY; - pin_mode = MLX5_PIN_MODE_OUT; pattern = MLX5_OUT_PATTERN_PERIODIC; ts.tv_sec = rq->perout.period.sec; -- cgit v1.2.3 From 1e74152ed065ef491c30ccbbe119992e3e5200be Mon Sep 17 00:00:00 2001 From: Roi Dayan Date: Tue, 2 Mar 2021 11:31:08 +0200 Subject: net/mlx5e: Check correct ip_version in decapsulation route resolution flow_attr->ip_version has the matching that should be done inner/outer. When working with chains, decapsulation is done on chain0 and next chain match on outer header which is the original inner which could be ipv4. So in tunnel route resolution we cannot use that to know which ip version we are at so save tun_ip_version when parsing the tunnel match and use that. Fixes: a508728a4c8b ("net/mlx5e: VF tunnel RX traffic offloading") Signed-off-by: Roi Dayan Reviewed-by: Dmytro Linkin Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c | 8 ++++---- drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c | 3 ++- drivers/net/ethernet/mellanox/mlx5/core/en_tc.h | 1 + 3 files changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c index f8075a604605..172e0474f2e6 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c @@ -685,14 +685,14 @@ int mlx5e_tc_tun_route_lookup(struct mlx5e_priv *priv, u16 vport_num; int err = 0; - if (flow_attr->ip_version == 4) { + if (flow_attr->tun_ip_version == 4) { /* Addresses are swapped for decap */ attr.fl.fl4.saddr = esw_attr->rx_tun_attr->dst_ip.v4; attr.fl.fl4.daddr = esw_attr->rx_tun_attr->src_ip.v4; err = mlx5e_route_lookup_ipv4_get(priv, priv->netdev, &attr); } #if IS_ENABLED(CONFIG_INET) && IS_ENABLED(CONFIG_IPV6) - else if (flow_attr->ip_version == 6) { + else if (flow_attr->tun_ip_version == 6) { /* Addresses are swapped for decap */ attr.fl.fl6.saddr = esw_attr->rx_tun_attr->dst_ip.v6; attr.fl.fl6.daddr = esw_attr->rx_tun_attr->src_ip.v6; @@ -718,10 +718,10 @@ int mlx5e_tc_tun_route_lookup(struct mlx5e_priv *priv, esw_attr->rx_tun_attr->decap_vport = vport_num; out: - if (flow_attr->ip_version == 4) + if (flow_attr->tun_ip_version == 4) mlx5e_route_lookup_ipv4_put(&attr); #if IS_ENABLED(CONFIG_INET) && IS_ENABLED(CONFIG_IPV6) - else if (flow_attr->ip_version == 6) + else if (flow_attr->tun_ip_version == 6) mlx5e_route_lookup_ipv6_put(&attr); #endif return err; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c index 6a116335bb21..7f7b0f6dcdf9 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c @@ -89,6 +89,7 @@ int mlx5e_tc_set_attr_rx_tun(struct mlx5e_tc_flow *flow, * required to establish routing. */ flow_flag_set(flow, TUN_RX); + flow->attr->tun_ip_version = ip_version; return 0; } @@ -1091,7 +1092,7 @@ int mlx5e_attach_decap_route(struct mlx5e_priv *priv, if (err || !esw_attr->rx_tun_attr->decap_vport) goto out; - key.ip_version = attr->ip_version; + key.ip_version = attr->tun_ip_version; if (key.ip_version == 4) key.endpoint_ip.v4 = esw_attr->rx_tun_attr->dst_ip.v4; else diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.h b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.h index 89003ae7775a..25c091795bcd 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.h @@ -79,6 +79,7 @@ struct mlx5_flow_attr { u8 inner_match_level; u8 outer_match_level; u8 ip_version; + u8 tun_ip_version; u32 flags; union { struct mlx5_esw_flow_attr esw_attr[0]; -- cgit v1.2.3 From f574531a0b77261478408e9c8f70d96dc701a35a Mon Sep 17 00:00:00 2001 From: Maor Dickman Date: Mon, 1 Mar 2021 13:07:08 +0200 Subject: net/mlx5: Disable VF tunnel TX offload if ignore_flow_level isn't supported VF tunnel TX traffic offload is adding flow which forward to flow tables with lower level, which isn't support on all FW versions and may cause firmware to fail with syndrome. Fixed by enabling VF tunnel TX offload only if flow table capability ignore_flow_level is enabled. Fixes: 10742efc20a4 ("net/mlx5e: VF tunnel TX traffic offloading") Signed-off-by: Maor Dickman Reviewed-by: Vlad Buslov Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c index 94cb0217b4f3..8694b83968b4 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c @@ -551,7 +551,8 @@ esw_setup_dests(struct mlx5_flow_destination *dest, if (!mlx5_eswitch_termtbl_required(esw, attr, flow_act, spec) && MLX5_CAP_GEN(esw_attr->in_mdev, reg_c_preserve) && - mlx5_eswitch_vport_match_metadata_enabled(esw)) + mlx5_eswitch_vport_match_metadata_enabled(esw) && + MLX5_CAP_ESW_FLOWTABLE_FDB(esw->dev, ignore_flow_level)) attr->flags |= MLX5_ESW_ATTR_FLAG_SRC_REWRITE; if (attr->dest_ft) { -- cgit v1.2.3 From 469549e4778a1e5ac4a7c6659c4b1a75a648bfdf Mon Sep 17 00:00:00 2001 From: Roi Dayan Date: Wed, 10 Feb 2021 10:33:13 +0200 Subject: net/mlx5e: Fix error flow in change profile Move priv memset from init to cleanup to avoid double priv cleanup that can happen on profile change if also roolback fails. Add missing cleanup flow in mlx5e_netdev_attach_profile(). Fixes: c4d7eb57687f ("net/mxl5e: Add change profile method") Signed-off-by: Roi Dayan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 41 +++++++++++++--------- .../net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c | 3 +- 2 files changed, 26 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 6b761fb8d269..33b418796e43 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -5488,8 +5488,6 @@ int mlx5e_priv_init(struct mlx5e_priv *priv, struct net_device *netdev, struct mlx5_core_dev *mdev) { - memset(priv, 0, sizeof(*priv)); - /* priv init */ priv->mdev = mdev; priv->netdev = netdev; @@ -5522,12 +5520,18 @@ void mlx5e_priv_cleanup(struct mlx5e_priv *priv) { int i; + /* bail if change profile failed and also rollback failed */ + if (!priv->mdev) + return; + destroy_workqueue(priv->wq); free_cpumask_var(priv->scratchpad.cpumask); for (i = 0; i < priv->htb.max_qos_sqs; i++) kfree(priv->htb.qos_sq_stats[i]); kvfree(priv->htb.qos_sq_stats); + + memset(priv, 0, sizeof(*priv)); } struct net_device * @@ -5644,11 +5648,10 @@ void mlx5e_detach_netdev(struct mlx5e_priv *priv) } static int -mlx5e_netdev_attach_profile(struct mlx5e_priv *priv, +mlx5e_netdev_attach_profile(struct net_device *netdev, struct mlx5_core_dev *mdev, const struct mlx5e_profile *new_profile, void *new_ppriv) { - struct net_device *netdev = priv->netdev; - struct mlx5_core_dev *mdev = priv->mdev; + struct mlx5e_priv *priv = netdev_priv(netdev); int err; err = mlx5e_priv_init(priv, netdev, mdev); @@ -5661,10 +5664,16 @@ mlx5e_netdev_attach_profile(struct mlx5e_priv *priv, priv->ppriv = new_ppriv; err = new_profile->init(priv->mdev, priv->netdev); if (err) - return err; + goto priv_cleanup; err = mlx5e_attach_netdev(priv); if (err) - new_profile->cleanup(priv); + goto profile_cleanup; + return err; + +profile_cleanup: + new_profile->cleanup(priv); +priv_cleanup: + mlx5e_priv_cleanup(priv); return err; } @@ -5673,13 +5682,14 @@ int mlx5e_netdev_change_profile(struct mlx5e_priv *priv, { unsigned int new_max_nch = mlx5e_calc_max_nch(priv, new_profile); const struct mlx5e_profile *orig_profile = priv->profile; + struct net_device *netdev = priv->netdev; + struct mlx5_core_dev *mdev = priv->mdev; void *orig_ppriv = priv->ppriv; int err, rollback_err; /* sanity */ if (new_max_nch != priv->max_nch) { - netdev_warn(priv->netdev, - "%s: Replacing profile with different max channels\n", + netdev_warn(netdev, "%s: Replacing profile with different max channels\n", __func__); return -EINVAL; } @@ -5689,22 +5699,19 @@ int mlx5e_netdev_change_profile(struct mlx5e_priv *priv, priv->profile->cleanup(priv); mlx5e_priv_cleanup(priv); - err = mlx5e_netdev_attach_profile(priv, new_profile, new_ppriv); + err = mlx5e_netdev_attach_profile(netdev, mdev, new_profile, new_ppriv); if (err) { /* roll back to original profile */ - netdev_warn(priv->netdev, "%s: new profile init failed, %d\n", - __func__, err); + netdev_warn(netdev, "%s: new profile init failed, %d\n", __func__, err); goto rollback; } return 0; rollback: - rollback_err = mlx5e_netdev_attach_profile(priv, orig_profile, orig_ppriv); - if (rollback_err) { - netdev_err(priv->netdev, - "%s: failed to rollback to orig profile, %d\n", + rollback_err = mlx5e_netdev_attach_profile(netdev, mdev, orig_profile, orig_ppriv); + if (rollback_err) + netdev_err(netdev, "%s: failed to rollback to orig profile, %d\n", __func__, rollback_err); - } return err; } diff --git a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c index 1eeca45cfcdf..756fa0401ab7 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c @@ -694,6 +694,7 @@ static int mlx5i_check_required_hca_cap(struct mlx5_core_dev *mdev) static void mlx5_rdma_netdev_free(struct net_device *netdev) { struct mlx5e_priv *priv = mlx5i_epriv(netdev); + struct mlx5_core_dev *mdev = priv->mdev; struct mlx5i_priv *ipriv = priv->ppriv; const struct mlx5e_profile *profile = priv->profile; @@ -702,7 +703,7 @@ static void mlx5_rdma_netdev_free(struct net_device *netdev) if (!ipriv->sub_interface) { mlx5i_pkey_qpn_ht_cleanup(netdev); - mlx5e_destroy_mdev_resources(priv->mdev); + mlx5e_destroy_mdev_resources(mdev); } } -- cgit v1.2.3 From 4806f1e2fee84c053cb68cd5be5817170bf0aab6 Mon Sep 17 00:00:00 2001 From: Maor Gottlieb Date: Wed, 3 Mar 2021 14:36:16 +0200 Subject: net/mlx5: Set QP timestamp mode to default QPs which don't care from timestamp mode, should set the ts_format to default, otherwise the QP creation could be failed if the timestamp mode is not supported. Fixes: 2fe8d4b87802 ("RDMA/mlx5: Fail QP creation if the device can not support the CQE TS") Signed-off-by: Maor Gottlieb Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/fpga/conn.c | 1 + drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c | 1 + drivers/net/ethernet/mellanox/mlx5/core/steering/dr_send.c | 1 + 3 files changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fpga/conn.c b/drivers/net/ethernet/mellanox/mlx5/core/fpga/conn.c index 80da50e12915..bd66ab2af5b5 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fpga/conn.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fpga/conn.c @@ -575,6 +575,7 @@ static int mlx5_fpga_conn_create_qp(struct mlx5_fpga_conn *conn, MLX5_SET(qpc, qpc, log_sq_size, ilog2(conn->qp.sq.size)); MLX5_SET(qpc, qpc, cqn_snd, conn->cq.mcq.cqn); MLX5_SET(qpc, qpc, cqn_rcv, conn->cq.mcq.cqn); + MLX5_SET(qpc, qpc, ts_format, mlx5_get_qp_default_ts(mdev)); MLX5_SET64(qpc, qpc, dbr_addr, conn->qp.wq_ctrl.db.dma); if (MLX5_CAP_GEN(mdev, cqe_version) == 1) MLX5_SET(qpc, qpc, user_index, 0xFFFFFF); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c index 756fa0401ab7..6f7cef47e04c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c @@ -233,6 +233,7 @@ int mlx5i_create_underlay_qp(struct mlx5e_priv *priv) } qpc = MLX5_ADDR_OF(create_qp_in, in, qpc); + MLX5_SET(qpc, qpc, ts_format, mlx5_get_qp_default_ts(priv->mdev)); MLX5_SET(qpc, qpc, st, MLX5_QP_ST_UD); MLX5_SET(qpc, qpc, pm_state, MLX5_QP_PM_MIGRATED); MLX5_SET(qpc, qpc, ulp_stateless_offload_mode, diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_send.c b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_send.c index 83c4c877d558..8a6a56f9dc4e 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_send.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_send.c @@ -169,6 +169,7 @@ static struct mlx5dr_qp *dr_create_rc_qp(struct mlx5_core_dev *mdev, MLX5_SET(qpc, qpc, log_rq_size, ilog2(dr_qp->rq.wqe_cnt)); MLX5_SET(qpc, qpc, rq_type, MLX5_NON_ZERO_RQ); MLX5_SET(qpc, qpc, log_sq_size, ilog2(dr_qp->sq.wqe_cnt)); + MLX5_SET(qpc, qpc, ts_format, mlx5_get_qp_default_ts(mdev)); MLX5_SET64(qpc, qpc, dbr_addr, dr_qp->wq_ctrl.db.dma); if (MLX5_CAP_GEN(mdev, cqe_version) == 1) MLX5_SET(qpc, qpc, user_index, 0xFFFFFF); -- cgit v1.2.3 From 8256c69b2d9c35e94d0e424184c0d27b59bdee12 Mon Sep 17 00:00:00 2001 From: Maor Gottlieb Date: Wed, 3 Mar 2021 14:39:20 +0200 Subject: RDMA/mlx5: Fix timestamp default mode 1. Don't set the ts_format bit to default when it reserved - device is running in the old mode (free running). 2. XRC doesn't have a CQ therefore the ts format in the QP context should be default / free running. 3. Set ts_format to WQ. Fixes: 2fe8d4b87802 ("RDMA/mlx5: Fail QP creation if the device can not support the CQE TS") Signed-off-by: Maor Gottlieb Signed-off-by: Saeed Mahameed --- drivers/infiniband/hw/mlx5/qp.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c index ec4b3f6a8222..f5a52a6fae43 100644 --- a/drivers/infiniband/hw/mlx5/qp.c +++ b/drivers/infiniband/hw/mlx5/qp.c @@ -1078,7 +1078,7 @@ static int _create_kernel_qp(struct mlx5_ib_dev *dev, qpc = MLX5_ADDR_OF(create_qp_in, *in, qpc); MLX5_SET(qpc, qpc, uar_page, uar_index); - MLX5_SET(qpc, qpc, ts_format, MLX5_QPC_TIMESTAMP_FORMAT_DEFAULT); + MLX5_SET(qpc, qpc, ts_format, mlx5_get_qp_default_ts(dev->mdev)); MLX5_SET(qpc, qpc, log_page_size, qp->buf.page_shift - MLX5_ADAPTER_PAGE_SHIFT); /* Set "fast registration enabled" for all kernel QPs */ @@ -1188,7 +1188,8 @@ static int get_rq_ts_format(struct mlx5_ib_dev *dev, struct mlx5_ib_cq *send_cq) } return MLX5_RQC_TIMESTAMP_FORMAT_FREE_RUNNING; } - return MLX5_RQC_TIMESTAMP_FORMAT_DEFAULT; + return fr_supported ? MLX5_RQC_TIMESTAMP_FORMAT_FREE_RUNNING : + MLX5_RQC_TIMESTAMP_FORMAT_DEFAULT; } static int get_sq_ts_format(struct mlx5_ib_dev *dev, struct mlx5_ib_cq *send_cq) @@ -1206,7 +1207,8 @@ static int get_sq_ts_format(struct mlx5_ib_dev *dev, struct mlx5_ib_cq *send_cq) } return MLX5_SQC_TIMESTAMP_FORMAT_FREE_RUNNING; } - return MLX5_SQC_TIMESTAMP_FORMAT_DEFAULT; + return fr_supported ? MLX5_SQC_TIMESTAMP_FORMAT_FREE_RUNNING : + MLX5_SQC_TIMESTAMP_FORMAT_DEFAULT; } static int get_qp_ts_format(struct mlx5_ib_dev *dev, struct mlx5_ib_cq *send_cq, @@ -1217,7 +1219,8 @@ static int get_qp_ts_format(struct mlx5_ib_dev *dev, struct mlx5_ib_cq *send_cq, MLX5_QP_TIMESTAMP_FORMAT_CAP_FREE_RUNNING || MLX5_CAP_ROCE(dev->mdev, qp_ts_format) == MLX5_QP_TIMESTAMP_FORMAT_CAP_FREE_RUNNING_AND_REAL_TIME; - int ts_format = MLX5_QPC_TIMESTAMP_FORMAT_DEFAULT; + int ts_format = fr_supported ? MLX5_QPC_TIMESTAMP_FORMAT_FREE_RUNNING : + MLX5_QPC_TIMESTAMP_FORMAT_DEFAULT; if (recv_cq && recv_cq->create_flags & IB_UVERBS_CQ_FLAGS_TIMESTAMP_COMPLETION) @@ -1930,6 +1933,7 @@ static int create_xrc_tgt_qp(struct mlx5_ib_dev *dev, struct mlx5_ib_qp *qp, if (qp->flags & IB_QP_CREATE_MANAGED_RECV) MLX5_SET(qpc, qpc, cd_slave_receive, 1); + MLX5_SET(qpc, qpc, ts_format, mlx5_get_qp_default_ts(dev->mdev)); MLX5_SET(qpc, qpc, rq_type, MLX5_SRQ_RQ); MLX5_SET(qpc, qpc, no_sq, 1); MLX5_SET(qpc, qpc, cqn_rcv, to_mcq(devr->c0)->mcq.cqn); @@ -4873,6 +4877,7 @@ static int create_rq(struct mlx5_ib_rwq *rwq, struct ib_pd *pd, struct mlx5_ib_dev *dev; int has_net_offloads; __be64 *rq_pas0; + int ts_format; void *in; void *rqc; void *wq; @@ -4881,6 +4886,10 @@ static int create_rq(struct mlx5_ib_rwq *rwq, struct ib_pd *pd, dev = to_mdev(pd->device); + ts_format = get_rq_ts_format(dev, to_mcq(init_attr->cq)); + if (ts_format < 0) + return ts_format; + inlen = MLX5_ST_SZ_BYTES(create_rq_in) + sizeof(u64) * rwq->rq_num_pas; in = kvzalloc(inlen, GFP_KERNEL); if (!in) @@ -4890,6 +4899,7 @@ static int create_rq(struct mlx5_ib_rwq *rwq, struct ib_pd *pd, rqc = MLX5_ADDR_OF(create_rq_in, in, ctx); MLX5_SET(rqc, rqc, mem_rq_type, MLX5_RQC_MEM_RQ_TYPE_MEMORY_RQ_INLINE); + MLX5_SET(rqc, rqc, ts_format, ts_format); MLX5_SET(rqc, rqc, user_index, rwq->user_index); MLX5_SET(rqc, rqc, cqn, to_mcq(init_attr->cq)->mcq.cqn); MLX5_SET(rqc, rqc, state, MLX5_RQC_STATE_RST); -- cgit v1.2.3 From 8b90d897823b28a51811931f3bdc79f8df79407e Mon Sep 17 00:00:00 2001 From: Parav Pandit Date: Wed, 17 Feb 2021 08:23:29 +0200 Subject: net/mlx5e: E-switch, Fix rate calculation division do_div() returns reminder, while cited patch wanted to use quotient. Fix it by using quotient. Fixes: 0e22bfb7c046 ("net/mlx5e: E-switch, Fix rate calculation for overflow") Signed-off-by: Parav Pandit Signed-off-by: Maor Dickman Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index 0da69b98f38f..0cacf46dc950 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -4445,7 +4445,8 @@ static int apply_police_params(struct mlx5e_priv *priv, u64 rate, */ if (rate) { rate = (rate * BITS_PER_BYTE) + 500000; - rate_mbps = max_t(u64, do_div(rate, 1000000), 1); + do_div(rate, 1000000); + rate_mbps = max_t(u32, rate, 1); } err = mlx5_esw_modify_vport_rate(esw, vport_num, rate_mbps); -- cgit v1.2.3 From 6a3717544ce9ee8a2058fbc75c67060515435937 Mon Sep 17 00:00:00 2001 From: Parav Pandit Date: Fri, 26 Feb 2021 10:15:16 +0200 Subject: net/mlx5: SF, Correct vhca context size Fix vhca context size as defined by device interface specification. Fixes: f3196bb0f14c ("net/mlx5: Introduce vhca state event notifier") Signed-off-by: Parav Pandit Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/sf/mlx5_ifc_vhca_event.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/sf/mlx5_ifc_vhca_event.h b/drivers/net/ethernet/mellanox/mlx5/core/sf/mlx5_ifc_vhca_event.h index 1daf5a122ba3..4fc870140d71 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/sf/mlx5_ifc_vhca_event.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/sf/mlx5_ifc_vhca_event.h @@ -20,7 +20,7 @@ struct mlx5_ifc_vhca_state_context_bits { u8 sw_function_id[0x20]; - u8 reserved_at_40[0x80]; + u8 reserved_at_40[0x40]; }; struct mlx5_ifc_query_vhca_state_out_bits { -- cgit v1.2.3 From 6fa37d66ef2dc850ff18b2a057a84cd7ca8499bb Mon Sep 17 00:00:00 2001 From: Shay Drory Date: Tue, 2 Feb 2021 12:21:04 +0200 Subject: net/mlx5: SF: Fix memory leak of work item Cited patch in the fixes tag missed to free the allocated work. Fix it by freeing the work after work execution. Fixes: f3196bb0f14c ("net/mlx5: Introduce vhca state event notifier") Signed-off-by: Shay Drory Reviewed-by: Parav Pandit Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/sf/vhca_event.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/sf/vhca_event.c b/drivers/net/ethernet/mellanox/mlx5/core/sf/vhca_event.c index af2f2dd9db25..f1c2068d4f2a 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/sf/vhca_event.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/sf/vhca_event.c @@ -94,6 +94,7 @@ static void mlx5_vhca_state_work_handler(struct work_struct *_work) struct mlx5_core_dev *dev = notifier->dev; mlx5_vhca_event_notify(dev, &work->event); + kfree(work); } static int -- cgit v1.2.3 From dc694f11a7593b7fd5aabe15a0e6c8fd2de24ebf Mon Sep 17 00:00:00 2001 From: Shay Drory Date: Thu, 11 Feb 2021 15:41:35 +0200 Subject: net/mlx5: SF: Fix error flow of SFs allocation flow When SF id is unavailable, code jumps to wrong label that accesses sw id array outside of its range. Hence, when SF id is not allocated, avoid accessing such array. Fixes: 8f0105418668 ("net/mlx5: SF, Add port add delete functionality") Signed-off-by: Shay Drory Reviewed-by: Parav Pandit Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/sf/hw_table.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/sf/hw_table.c b/drivers/net/ethernet/mellanox/mlx5/core/sf/hw_table.c index 58b6be0b03d7..0914909806cb 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/sf/hw_table.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/sf/hw_table.c @@ -64,7 +64,7 @@ int mlx5_sf_hw_table_sf_alloc(struct mlx5_core_dev *dev, u32 usr_sfnum) } if (sw_id == -ENOSPC) { err = -ENOSPC; - goto err; + goto exist_err; } hw_fn_id = mlx5_sf_sw_to_hw_id(table->dev, sw_id); -- cgit v1.2.3 From 84076c4c800d1be77199a139d65b8b136a61422e Mon Sep 17 00:00:00 2001 From: Yevgeny Kliteynik Date: Sat, 6 Feb 2021 22:11:52 +0200 Subject: net/mlx5: DR, Fix potential shift wrapping of 32-bit value in STEv1 getter Fix 32-bit variable shift wrapping in dr_ste_v1_get_miss_addr. Fixes: a6098129c781 ("net/mlx5: DR, Add STEv1 setters and getters") Reported-by: Dan Carpenter Signed-off-by: Yevgeny Kliteynik Reviewed-by: Alex Vesker Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste_v1.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste_v1.c b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste_v1.c index 4088d6e51508..9143ec326ebf 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste_v1.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste_v1.c @@ -264,8 +264,8 @@ static void dr_ste_v1_set_miss_addr(u8 *hw_ste_p, u64 miss_addr) static u64 dr_ste_v1_get_miss_addr(u8 *hw_ste_p) { u64 index = - (MLX5_GET(ste_match_bwc_v1, hw_ste_p, miss_address_31_6) | - MLX5_GET(ste_match_bwc_v1, hw_ste_p, miss_address_39_32) << 26); + ((u64)MLX5_GET(ste_match_bwc_v1, hw_ste_p, miss_address_31_6) | + ((u64)MLX5_GET(ste_match_bwc_v1, hw_ste_p, miss_address_39_32)) << 26); return index << 6; } -- cgit v1.2.3 From 2a9be38099e338f597c14d3cb851849b01db05f6 Mon Sep 17 00:00:00 2001 From: Jonathan Marek Date: Thu, 4 Mar 2021 14:48:16 -0500 Subject: pinctrl: qcom: lpass lpi: use default pullup/strength values If these fields are not set in dts, the driver will use these variables uninitialized to set the fields. Not only will it set garbage values for these fields, but it can overflow into other fields and break those. In the current sm8250 dts, the dmic01 entries do not have a pullup setting, and might not work without this change. Reported-by: kernel test robot Reported-by: Dan Carpenter Fixes: 6e261d1090d6 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver") Signed-off-by: Jonathan Marek Reviewed-by: Bjorn Andersson Reviewed-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20210304194816.3843-1-jonathan@marek.ca Signed-off-by: Linus Walleij --- drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c index 369ee20a7ea9..2f19ab4db720 100644 --- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c @@ -392,7 +392,7 @@ static int lpi_config_set(struct pinctrl_dev *pctldev, unsigned int group, unsigned long *configs, unsigned int nconfs) { struct lpi_pinctrl *pctrl = dev_get_drvdata(pctldev->dev); - unsigned int param, arg, pullup, strength; + unsigned int param, arg, pullup = LPI_GPIO_BIAS_DISABLE, strength = 2; bool value, output_enabled = false; const struct lpi_pingroup *g; unsigned long sval; -- cgit v1.2.3 From 0571a753cb07982cc82f4a5115e0b321da89e1f3 Mon Sep 17 00:00:00 2001 From: Pavel Andrianov Date: Wed, 10 Mar 2021 11:10:46 +0300 Subject: net: pxa168_eth: Fix a potential data race in pxa168_eth_remove pxa168_eth_remove() firstly calls unregister_netdev(), then cancels a timeout work. unregister_netdev() shuts down a device interface and removes it from the kernel tables. If the timeout occurs in parallel, the timeout work (pxa168_eth_tx_timeout_task) performs stop and open of the device. It may lead to an inconsistent state and memory leaks. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Pavel Andrianov Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/pxa168_eth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/pxa168_eth.c b/drivers/net/ethernet/marvell/pxa168_eth.c index d1e4d42e497d..3712e1786091 100644 --- a/drivers/net/ethernet/marvell/pxa168_eth.c +++ b/drivers/net/ethernet/marvell/pxa168_eth.c @@ -1544,8 +1544,8 @@ static int pxa168_eth_remove(struct platform_device *pdev) clk_disable_unprepare(pep->clk); mdiobus_unregister(pep->smi_bus); mdiobus_free(pep->smi_bus); - unregister_netdev(dev); cancel_work_sync(&pep->tx_timeout_task); + unregister_netdev(dev); free_netdev(dev); return 0; } -- cgit v1.2.3 From 8373a0fe9c7160a55482effa8a3f725efd3f8434 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Wed, 10 Mar 2021 13:51:59 +0100 Subject: net: dsa: bcm_sf2: use 2 Gbps IMP port link on BCM4908 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit BCM4908 uses 2 Gbps link between switch and the Ethernet interface. Without this BCM4908 devices were able to achieve only 2 x ~895 Mb/s. This allows handling e.g. NAT traffic with 940 Mb/s. Signed-off-by: Rafał Miłecki Acked-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/dsa/bcm_sf2.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index f277df922fcd..4dedd6e0b11b 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -114,7 +114,10 @@ static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port) /* Force link status for IMP port */ reg = core_readl(priv, offset); reg |= (MII_SW_OR | LINK_STS); - reg &= ~GMII_SPEED_UP_2G; + if (priv->type == BCM4908_DEVICE_ID) + reg |= GMII_SPEED_UP_2G; + else + reg &= ~GMII_SPEED_UP_2G; core_writel(priv, reg, offset); /* Enable Broadcast, Multicast, Unicast forwarding to IMP port */ -- cgit v1.2.3 From d45c36bafb94e72fdb6dee437279b61b6d97e706 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 10 Mar 2021 10:46:10 -0800 Subject: net: dsa: b53: VLAN filtering is global to all users The bcm_sf2 driver uses the b53 driver as a library but does not make usre of the b53_setup() function, this made it fail to inherit the vlan_filtering_is_global attribute. Fix this by moving the assignment to b53_switch_alloc() which is used by bcm_sf2. Fixes: 7228b23e68f7 ("net: dsa: b53: Let DSA handle mismatched VLAN filtering settings") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/dsa/b53/b53_common.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c index a162499bcafc..eb443721c58e 100644 --- a/drivers/net/dsa/b53/b53_common.c +++ b/drivers/net/dsa/b53/b53_common.c @@ -1105,13 +1105,6 @@ static int b53_setup(struct dsa_switch *ds) b53_disable_port(ds, port); } - /* Let DSA handle the case were multiple bridges span the same switch - * device and different VLAN awareness settings are requested, which - * would be breaking filtering semantics for any of the other bridge - * devices. (not hardware supported) - */ - ds->vlan_filtering_is_global = true; - return b53_setup_devlink_resources(ds); } @@ -2664,6 +2657,13 @@ struct b53_device *b53_switch_alloc(struct device *base, ds->ops = &b53_switch_ops; ds->untag_bridge_pvid = true; dev->vlan_enabled = true; + /* Let DSA handle the case were multiple bridges span the same switch + * device and different VLAN awareness settings are requested, which + * would be breaking filtering semantics for any of the other bridge + * devices. (not hardware supported) + */ + ds->vlan_filtering_is_global = true; + mutex_init(&dev->reg_mutex); mutex_init(&dev->stats_mutex); -- cgit v1.2.3 From 07abd8db9358751107cc46d1cdbd44a92c76a934 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Tue, 2 Mar 2021 10:51:50 +0530 Subject: pinctrl: qcom: sc7280: Fix SDC_QDSD_PINGROUP and UFS_RESET offsets The offsets for SDC_QDSD_PINGROUP and UFS_RESET were off by 0x100000 due to an issue in the scripts generating the data. Fixes: ecb454594c43: ("pinctrl: qcom: Add sc7280 pinctrl driver") Reported-by: Veerabhadrarao Badiganti Signed-off-by: Rajendra Nayak Reviewed-by: Bjorn Andersson Link: https://lore.kernel.org/r/1614662511-26519-1-git-send-email-rnayak@codeaurora.org Signed-off-by: Linus Walleij --- drivers/pinctrl/qcom/pinctrl-sc7280.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/pinctrl/qcom/pinctrl-sc7280.c b/drivers/pinctrl/qcom/pinctrl-sc7280.c index 8daccd530285..49c434788304 100644 --- a/drivers/pinctrl/qcom/pinctrl-sc7280.c +++ b/drivers/pinctrl/qcom/pinctrl-sc7280.c @@ -1439,14 +1439,14 @@ static const struct msm_pingroup sc7280_groups[] = { [172] = PINGROUP(172, qdss, _, _, _, _, _, _, _, _), [173] = PINGROUP(173, qdss, _, _, _, _, _, _, _, _), [174] = PINGROUP(174, qdss, _, _, _, _, _, _, _, _), - [175] = UFS_RESET(ufs_reset, 0x1be000), - [176] = SDC_QDSD_PINGROUP(sdc1_rclk, 0x1b3000, 15, 0), - [177] = SDC_QDSD_PINGROUP(sdc1_clk, 0x1b3000, 13, 6), - [178] = SDC_QDSD_PINGROUP(sdc1_cmd, 0x1b3000, 11, 3), - [179] = SDC_QDSD_PINGROUP(sdc1_data, 0x1b3000, 9, 0), - [180] = SDC_QDSD_PINGROUP(sdc2_clk, 0x1b4000, 14, 6), - [181] = SDC_QDSD_PINGROUP(sdc2_cmd, 0x1b4000, 11, 3), - [182] = SDC_QDSD_PINGROUP(sdc2_data, 0x1b4000, 9, 0), + [175] = UFS_RESET(ufs_reset, 0xbe000), + [176] = SDC_QDSD_PINGROUP(sdc1_rclk, 0xb3000, 15, 0), + [177] = SDC_QDSD_PINGROUP(sdc1_clk, 0xb3000, 13, 6), + [178] = SDC_QDSD_PINGROUP(sdc1_cmd, 0xb3000, 11, 3), + [179] = SDC_QDSD_PINGROUP(sdc1_data, 0xb3000, 9, 0), + [180] = SDC_QDSD_PINGROUP(sdc2_clk, 0xb4000, 14, 6), + [181] = SDC_QDSD_PINGROUP(sdc2_cmd, 0xb4000, 11, 3), + [182] = SDC_QDSD_PINGROUP(sdc2_data, 0xb4000, 9, 0), }; static const struct msm_pinctrl_soc_data sc7280_pinctrl = { -- cgit v1.2.3 From d0f9f47c07fe52b34e2ff8590cf09e0a9d8d6f99 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Tue, 2 Mar 2021 10:51:51 +0530 Subject: pinctrl: qcom: sc7280: Fix SDC1_RCLK configurations Fix SDC1_RCLK configurations which are in a different register so fix the offset from 0xb3000 to 0xb3004. Fixes: ecb454594c43: ("pinctrl: qcom: Add sc7280 pinctrl driver") Reported-by: Veerabhadrarao Badiganti Signed-off-by: Rajendra Nayak Acked-by: Bjorn Andersson Link: https://lore.kernel.org/r/1614662511-26519-2-git-send-email-rnayak@codeaurora.org Signed-off-by: Linus Walleij --- drivers/pinctrl/qcom/pinctrl-sc7280.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pinctrl/qcom/pinctrl-sc7280.c b/drivers/pinctrl/qcom/pinctrl-sc7280.c index 49c434788304..9d41abfca37e 100644 --- a/drivers/pinctrl/qcom/pinctrl-sc7280.c +++ b/drivers/pinctrl/qcom/pinctrl-sc7280.c @@ -1440,7 +1440,7 @@ static const struct msm_pingroup sc7280_groups[] = { [173] = PINGROUP(173, qdss, _, _, _, _, _, _, _, _), [174] = PINGROUP(174, qdss, _, _, _, _, _, _, _, _), [175] = UFS_RESET(ufs_reset, 0xbe000), - [176] = SDC_QDSD_PINGROUP(sdc1_rclk, 0xb3000, 15, 0), + [176] = SDC_QDSD_PINGROUP(sdc1_rclk, 0xb3004, 0, 6), [177] = SDC_QDSD_PINGROUP(sdc1_clk, 0xb3000, 13, 6), [178] = SDC_QDSD_PINGROUP(sdc1_cmd, 0xb3000, 11, 3), [179] = SDC_QDSD_PINGROUP(sdc1_data, 0xb3000, 9, 0), -- cgit v1.2.3 From 47142ed6c34d544ae9f0463e58d482289cbe0d46 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 10 Mar 2021 14:17:58 -0800 Subject: net: dsa: bcm_sf2: Qualify phydev->dev_flags based on port Similar to commit 92696286f3bb37ba50e4bd8d1beb24afb759a799 ("net: bcmgenet: Set phydev->dev_flags only for internal PHYs") we need to qualify the phydev->dev_flags based on whether the port is connected to an internal or external PHY otherwise we risk having a flags collision with a completely different interpretation depending on the driver. Fixes: aa9aef77c761 ("net: dsa: bcm_sf2: communicate integrated PHY revision to PHY driver") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/dsa/bcm_sf2.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index 4dedd6e0b11b..ba5d546d06aa 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -588,8 +588,10 @@ static u32 bcm_sf2_sw_get_phy_flags(struct dsa_switch *ds, int port) * in bits 15:8 and the patch level in bits 7:0 which is exactly what * the REG_PHY_REVISION register layout is. */ - - return priv->hw_params.gphy_rev; + if (priv->int_phy_mask & BIT(port)) + return priv->hw_params.gphy_rev; + else + return 0; } static void bcm_sf2_sw_validate(struct dsa_switch *ds, int port, -- cgit v1.2.3 From 2fb164f0ce95e504e2688b4f984893c29ebd19ab Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Tue, 9 Mar 2021 01:01:07 +0100 Subject: mtd: rawnand: mtk: Fix WAITRDY break condition and timeout This fixes NAND_OP_WAITRDY_INSTR operation in the driver. Without this change the driver waits till the system is busy, but we should wait till the busy flag is cleared. The readl_poll_timeout() function gets a break condition, not a wait condition. In addition fix the timeout. The timeout_ms is given in ms, but the readl_poll_timeout() function takes the timeout in us. Multiple the given timeout by 1000 to convert it. Without this change, the driver does not work at all, it doesn't even identify the NAND chip. Fixes: 5197360f9e09 ("mtd: rawnand: mtk: Convert the driver to exec_op()") Signed-off-by: Hauke Mehrtens Reviewed-by: Boris Brezillon Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20210309000107.1368404-1-hauke@hauke-m.de --- drivers/mtd/nand/raw/mtk_nand.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/raw/mtk_nand.c b/drivers/mtd/nand/raw/mtk_nand.c index 57f1f1708994..5c5c92132287 100644 --- a/drivers/mtd/nand/raw/mtk_nand.c +++ b/drivers/mtd/nand/raw/mtk_nand.c @@ -488,8 +488,8 @@ static int mtk_nfc_exec_instr(struct nand_chip *chip, return 0; case NAND_OP_WAITRDY_INSTR: return readl_poll_timeout(nfc->regs + NFI_STA, status, - status & STA_BUSY, 20, - instr->ctx.waitrdy.timeout_ms); + !(status & STA_BUSY), 20, + instr->ctx.waitrdy.timeout_ms * 1000); default: break; } -- cgit v1.2.3 From 22053df0a3647560e6aa11cb6ddcb0da04f505cc Mon Sep 17 00:00:00 2001 From: Mark Zhang Date: Thu, 11 Mar 2021 16:20:24 +0200 Subject: RDMA/mlx5: Fix typo in destroy_mkey inbox Set mkey_index to the correct place when preparing the destroy_mkey inbox, this will fix the following syndrome: mlx5_core 0000:08:00.0: mlx5_cmd_check:782:(pid 980716): DEALLOC_PD(0x801) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x31b635) Link: https://lore.kernel.org/r/20210311142024.1282004-1-leon@kernel.org Fixes: 1368ead04c36 ("RDMA/mlx5: Use strict get/set operations for obj_id") Reviewed-by: Ido Kalir Reviewed-by: Yishai Hadas Signed-off-by: Mark Zhang Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/mlx5/devx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx5/devx.c b/drivers/infiniband/hw/mlx5/devx.c index de3c2fc6f361..07b8350929cd 100644 --- a/drivers/infiniband/hw/mlx5/devx.c +++ b/drivers/infiniband/hw/mlx5/devx.c @@ -1116,7 +1116,7 @@ static void devx_obj_build_destroy_cmd(void *in, void *out, void *din, case MLX5_CMD_OP_CREATE_MKEY: MLX5_SET(destroy_mkey_in, din, opcode, MLX5_CMD_OP_DESTROY_MKEY); - MLX5_SET(destroy_mkey_in, in, mkey_index, *obj_id); + MLX5_SET(destroy_mkey_in, din, mkey_index, *obj_id); break; case MLX5_CMD_OP_CREATE_CQ: MLX5_SET(destroy_cq_in, din, opcode, MLX5_CMD_OP_DESTROY_CQ); -- cgit v1.2.3 From 6da262378c99b17b1a1ac2e42aa65acc1bd471c7 Mon Sep 17 00:00:00 2001 From: Sasha Neftin Date: Tue, 20 Oct 2020 16:34:00 +0300 Subject: igc: reinit_locked() should be called with rtnl_lock This commit applies to the igc_reset_task the same changes that were applied to the igb driver in commit 024a8168b749 ("igb: reinit_locked() should be called with rtnl_lock") and fix possible race in reset subtask. Fixes: 0507ef8a0372 ("igc: Add transmit and receive fastpath and interrupt handlers") Suggested-by: Jakub Kicinski Signed-off-by: Sasha Neftin Tested-by: Dvora Fuxbrumer Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/igc/igc_main.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c index 7ac9597ddb84..4d989ebc9713 100644 --- a/drivers/net/ethernet/intel/igc/igc_main.c +++ b/drivers/net/ethernet/intel/igc/igc_main.c @@ -3831,10 +3831,19 @@ static void igc_reset_task(struct work_struct *work) adapter = container_of(work, struct igc_adapter, reset_task); + rtnl_lock(); + /* If we're already down or resetting, just bail */ + if (test_bit(__IGC_DOWN, &adapter->state) || + test_bit(__IGC_RESETTING, &adapter->state)) { + rtnl_unlock(); + return; + } + igc_rings_dump(adapter); igc_regs_dump(adapter); netdev_err(adapter->netdev, "Reset adapter\n"); igc_reinit_locked(adapter); + rtnl_unlock(); } /** -- cgit v1.2.3 From 8876529465c368beafd51a70f79d7a738f2aadf4 Mon Sep 17 00:00:00 2001 From: Muhammad Husaini Zulkifli Date: Sat, 20 Feb 2021 00:36:47 +0800 Subject: igc: Fix Pause Frame Advertising Fix Pause Frame Advertising when getting the advertisement via ethtool. Remove setting the "advertising" bit in link_ksettings during default case when Tx and Rx are in off state with Auto Negotiate off. Below is the original output of advertisement link during Tx and Rx off: Advertised pause frame use: Symmetric Receive-only Expected output: Advertised pause frame use: No Fixes: 8c5ad0dae93c ("igc: Add ethtool support") Signed-off-by: Muhammad Husaini Zulkifli Reviewed-by: Malli C Acked-by: Sasha Neftin Tested-by: Dvora Fuxbrumer Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/igc/igc_ethtool.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/igc/igc_ethtool.c b/drivers/net/ethernet/intel/igc/igc_ethtool.c index 824a6c454bca..67a4aed45fc2 100644 --- a/drivers/net/ethernet/intel/igc/igc_ethtool.c +++ b/drivers/net/ethernet/intel/igc/igc_ethtool.c @@ -1725,9 +1725,7 @@ static int igc_ethtool_get_link_ksettings(struct net_device *netdev, Asym_Pause); break; default: - ethtool_link_ksettings_add_link_mode(cmd, advertising, Pause); - ethtool_link_ksettings_add_link_mode(cmd, advertising, - Asym_Pause); + break; } status = pm_runtime_suspended(&adapter->pdev->dev) ? -- cgit v1.2.3 From 9a4a1cdc5ab52118c1f2b216f4240830b6528d32 Mon Sep 17 00:00:00 2001 From: Muhammad Husaini Zulkifli Date: Sat, 20 Feb 2021 00:36:48 +0800 Subject: igc: Fix Supported Pause Frame Link Setting The Supported Pause Frame always display "No" even though the Advertised pause frame showing the correct setting based on the pause parameters via ethtool. Set bit in link_ksettings to "Supported" for Pause Frame. Before output: Supported pause frame use: No Expected output: Supported pause frame use: Symmetric Fixes: 8c5ad0dae93c ("igc: Add ethtool support") Signed-off-by: Muhammad Husaini Zulkifli Reviewed-by: Malli C Tested-by: Dvora Fuxbrumer Acked-by: Sasha Neftin Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/igc/igc_ethtool.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/igc/igc_ethtool.c b/drivers/net/ethernet/intel/igc/igc_ethtool.c index 67a4aed45fc2..8722294ab90c 100644 --- a/drivers/net/ethernet/intel/igc/igc_ethtool.c +++ b/drivers/net/ethernet/intel/igc/igc_ethtool.c @@ -1711,6 +1711,9 @@ static int igc_ethtool_get_link_ksettings(struct net_device *netdev, Autoneg); } + /* Set pause flow control settings */ + ethtool_link_ksettings_add_link_mode(cmd, supported, Pause); + switch (hw->fc.requested_mode) { case igc_fc_full: ethtool_link_ksettings_add_link_mode(cmd, advertising, Pause); -- cgit v1.2.3 From fc9e5020971d57d7d0b3fef9e2ab2108fcb5588b Mon Sep 17 00:00:00 2001 From: Andre Guedes Date: Tue, 9 Mar 2021 22:42:56 -0800 Subject: igc: Fix igc_ptp_rx_pktstamp() The comment describing the timestamps layout in the packet buffer is wrong and the code is actually retrieving the timestamp in Timer 1 reference instead of Timer 0. This hasn't been a big issue so far because hardware is configured to report both timestamps using Timer 0 (see IGC_SRRCTL register configuration in igc_ptp_enable_rx_timestamp() helper). This patch fixes the comment and the code so we retrieve the timestamp in Timer 0 reference as expected. This patch also takes the opportunity to get rid of the hw.mac.type check since it is not required. Fixes: 81b055205e8ba ("igc: Add support for RX timestamping") Signed-off-by: Andre Guedes Signed-off-by: Vedang Patel Signed-off-by: Jithu Joseph Reviewed-by: Maciej Fijalkowski Tested-by: Dvora Fuxbrumer Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/igc/igc.h | 2 +- drivers/net/ethernet/intel/igc/igc_ptp.c | 72 ++++++++++++++++++-------------- 2 files changed, 41 insertions(+), 33 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/igc/igc.h b/drivers/net/ethernet/intel/igc/igc.h index 5d2809dfd06a..1b08a7dc7bc4 100644 --- a/drivers/net/ethernet/intel/igc/igc.h +++ b/drivers/net/ethernet/intel/igc/igc.h @@ -547,7 +547,7 @@ void igc_ptp_init(struct igc_adapter *adapter); void igc_ptp_reset(struct igc_adapter *adapter); void igc_ptp_suspend(struct igc_adapter *adapter); void igc_ptp_stop(struct igc_adapter *adapter); -void igc_ptp_rx_pktstamp(struct igc_q_vector *q_vector, void *va, +void igc_ptp_rx_pktstamp(struct igc_q_vector *q_vector, __le32 *va, struct sk_buff *skb); int igc_ptp_set_ts_config(struct net_device *netdev, struct ifreq *ifr); int igc_ptp_get_ts_config(struct net_device *netdev, struct ifreq *ifr); diff --git a/drivers/net/ethernet/intel/igc/igc_ptp.c b/drivers/net/ethernet/intel/igc/igc_ptp.c index ac0b9c85da7c..545f4d0e67cf 100644 --- a/drivers/net/ethernet/intel/igc/igc_ptp.c +++ b/drivers/net/ethernet/intel/igc/igc_ptp.c @@ -152,46 +152,54 @@ static void igc_ptp_systim_to_hwtstamp(struct igc_adapter *adapter, } /** - * igc_ptp_rx_pktstamp - retrieve Rx per packet timestamp + * igc_ptp_rx_pktstamp - Retrieve timestamp from Rx packet buffer * @q_vector: Pointer to interrupt specific structure * @va: Pointer to address containing Rx buffer * @skb: Buffer containing timestamp and packet * - * This function is meant to retrieve the first timestamp from the - * first buffer of an incoming frame. The value is stored in little - * endian format starting on byte 0. There's a second timestamp - * starting on byte 8. - **/ -void igc_ptp_rx_pktstamp(struct igc_q_vector *q_vector, void *va, + * This function retrieves the timestamp saved in the beginning of packet + * buffer. While two timestamps are available, one in timer0 reference and the + * other in timer1 reference, this function considers only the timestamp in + * timer0 reference. + */ +void igc_ptp_rx_pktstamp(struct igc_q_vector *q_vector, __le32 *va, struct sk_buff *skb) { struct igc_adapter *adapter = q_vector->adapter; - __le64 *regval = (__le64 *)va; - int adjust = 0; - - /* The timestamp is recorded in little endian format. - * DWORD: | 0 | 1 | 2 | 3 - * Field: | Timer0 Low | Timer0 High | Timer1 Low | Timer1 High + u64 regval; + int adjust; + + /* Timestamps are saved in little endian at the beginning of the packet + * buffer following the layout: + * + * DWORD: | 0 | 1 | 2 | 3 | + * Field: | Timer1 SYSTIML | Timer1 SYSTIMH | Timer0 SYSTIML | Timer0 SYSTIMH | + * + * SYSTIML holds the nanoseconds part while SYSTIMH holds the seconds + * part of the timestamp. */ - igc_ptp_systim_to_hwtstamp(adapter, skb_hwtstamps(skb), - le64_to_cpu(regval[0])); - - /* adjust timestamp for the RX latency based on link speed */ - if (adapter->hw.mac.type == igc_i225) { - switch (adapter->link_speed) { - case SPEED_10: - adjust = IGC_I225_RX_LATENCY_10; - break; - case SPEED_100: - adjust = IGC_I225_RX_LATENCY_100; - break; - case SPEED_1000: - adjust = IGC_I225_RX_LATENCY_1000; - break; - case SPEED_2500: - adjust = IGC_I225_RX_LATENCY_2500; - break; - } + regval = le32_to_cpu(va[2]); + regval |= (u64)le32_to_cpu(va[3]) << 32; + igc_ptp_systim_to_hwtstamp(adapter, skb_hwtstamps(skb), regval); + + /* Adjust timestamp for the RX latency based on link speed */ + switch (adapter->link_speed) { + case SPEED_10: + adjust = IGC_I225_RX_LATENCY_10; + break; + case SPEED_100: + adjust = IGC_I225_RX_LATENCY_100; + break; + case SPEED_1000: + adjust = IGC_I225_RX_LATENCY_1000; + break; + case SPEED_2500: + adjust = IGC_I225_RX_LATENCY_2500; + break; + default: + adjust = 0; + netdev_warn_once(adapter->netdev, "Imprecise timestamp\n"); + break; } skb_hwtstamps(skb)->hwtstamp = ktime_sub_ns(skb_hwtstamps(skb)->hwtstamp, adjust); -- cgit v1.2.3 From 21f857f0321d0d0ea9b1a758bd55dc63d1cb2437 Mon Sep 17 00:00:00 2001 From: Vitaly Lifshits Date: Wed, 21 Oct 2020 14:59:37 +0300 Subject: e1000e: add rtnl_lock() to e1000_reset_task A possible race condition was found in e1000_reset_task, after discovering a similar issue in igb driver via commit 024a8168b749 ("igb: reinit_locked() should be called with rtnl_lock"). Added rtnl_lock() and rtnl_unlock() to avoid this. Fixes: bc7f75fa9788 ("[E1000E]: New pci-express e1000 driver (currently for ICH9 devices only)") Suggested-by: Jakub Kicinski Signed-off-by: Vitaly Lifshits Tested-by: Dvora Fuxbrumer Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/e1000e/netdev.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index e9b82c209c2d..a0948002ddf8 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -5974,15 +5974,19 @@ static void e1000_reset_task(struct work_struct *work) struct e1000_adapter *adapter; adapter = container_of(work, struct e1000_adapter, reset_task); + rtnl_lock(); /* don't run the task if already down */ - if (test_bit(__E1000_DOWN, &adapter->state)) + if (test_bit(__E1000_DOWN, &adapter->state)) { + rtnl_unlock(); return; + } if (!(adapter->flags & FLAG_RESTART_NOW)) { e1000e_dump(adapter); e_err("Reset adapter unexpectedly\n"); } e1000e_reinit_locked(adapter); + rtnl_unlock(); } /** -- cgit v1.2.3 From b52912b8293f2c496f42583e65599aee606a0c18 Mon Sep 17 00:00:00 2001 From: Dinghao Liu Date: Sun, 28 Feb 2021 17:44:23 +0800 Subject: e1000e: Fix error handling in e1000_set_d0_lplu_state_82571 There is one e1e_wphy() call in e1000_set_d0_lplu_state_82571 that we have caught its return value but lack further handling. Check and terminate the execution flow just like other e1e_wphy() in this function. Fixes: bc7f75fa9788 ("[E1000E]: New pci-express e1000 driver (currently for ICH9 devices only)") Signed-off-by: Dinghao Liu Acked-by: Sasha Neftin Tested-by: Dvora Fuxbrumer Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/e1000e/82571.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c index 88faf05e23ba..0b1e890dd583 100644 --- a/drivers/net/ethernet/intel/e1000e/82571.c +++ b/drivers/net/ethernet/intel/e1000e/82571.c @@ -899,6 +899,8 @@ static s32 e1000_set_d0_lplu_state_82571(struct e1000_hw *hw, bool active) } else { data &= ~IGP02E1000_PM_D0_LPLU; ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data); + if (ret_val) + return ret_val; /* LPLU and SmartSpeed are mutually exclusive. LPLU is used * during Dx states where the power conservation is most * important. During driver activity we should enable -- cgit v1.2.3 From db74623a3850db99cb9692fda9e836a56b74198d Mon Sep 17 00:00:00 2001 From: Lv Yunlong Date: Wed, 10 Mar 2021 20:01:40 -0800 Subject: net/qlcnic: Fix a use after free in qlcnic_83xx_get_minidump_template In qlcnic_83xx_get_minidump_template, fw_dump->tmpl_hdr was freed by vfree(). But unfortunately, it is used when extended is true. Fixes: 7061b2bdd620e ("qlogic: Deletion of unnecessary checks before two function calls") Signed-off-by: Lv Yunlong Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c index 7760a3394e93..7ecb3dfe30bd 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c @@ -1425,6 +1425,7 @@ void qlcnic_83xx_get_minidump_template(struct qlcnic_adapter *adapter) if (fw_dump->tmpl_hdr == NULL || current_version > prev_version) { vfree(fw_dump->tmpl_hdr); + fw_dump->tmpl_hdr = NULL; if (qlcnic_83xx_md_check_extended_dump_capability(adapter)) extended = !qlcnic_83xx_extend_md_capab(adapter); @@ -1443,6 +1444,8 @@ void qlcnic_83xx_get_minidump_template(struct qlcnic_adapter *adapter) struct qlcnic_83xx_dump_template_hdr *hdr; hdr = fw_dump->tmpl_hdr; + if (!hdr) + return; hdr->drv_cap_mask = 0x1f; fw_dump->cap_mask = 0x1f; dev_info(&pdev->dev, -- cgit v1.2.3 From 0c9fdcdba68208270ae85d39600ea97da1718344 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 14 Jan 2021 19:29:28 +0800 Subject: soc: qcom: geni: shield geni_icc_get() for ACPI boot Currently, GENI devices like i2c-qcom-geni fails to probe in ACPI boot, if interconnect support is enabled. That's because interconnect driver only supports DT right now. As interconnect is not necessarily required for basic function of GENI devices, let's shield geni_icc_get() call, and then all other ICC calls become nop due to NULL icc_path, so that GENI devices keep working for ACPI boot. Reviewed-by: Bjorn Andersson Signed-off-by: Shawn Guo Link: https://lore.kernel.org/r/20210114112928.11368-1-shawn.guo@linaro.org Signed-off-by: Bjorn Andersson --- drivers/soc/qcom/qcom-geni-se.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c index f42954e2c98e..c7c03ccfe888 100644 --- a/drivers/soc/qcom/qcom-geni-se.c +++ b/drivers/soc/qcom/qcom-geni-se.c @@ -760,6 +760,9 @@ int geni_icc_get(struct geni_se *se, const char *icc_ddr) int i, err; const char *icc_names[] = {"qup-core", "qup-config", icc_ddr}; + if (has_acpi_companion(se->dev)) + return 0; + for (i = 0; i < ARRAY_SIZE(se->icc_paths); i++) { if (!icc_names[i]) continue; -- cgit v1.2.3 From a9f81244d2e33e6dfcef120fefd30c96b3f7cdb0 Mon Sep 17 00:00:00 2001 From: Tong Zhang Date: Wed, 10 Mar 2021 23:27:35 -0500 Subject: mISDN: fix crash in fritzpci setup_fritz() in avmfritz.c might fail with -EIO and in this case the isac.type and isac.write_reg is not initialized and remains 0(NULL). A subsequent call to isac_release() will dereference isac->write_reg and crash. [ 1.737444] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 1.737809] #PF: supervisor instruction fetch in kernel mode [ 1.738106] #PF: error_code(0x0010) - not-present page [ 1.738378] PGD 0 P4D 0 [ 1.738515] Oops: 0010 [#1] SMP NOPTI [ 1.738711] CPU: 0 PID: 180 Comm: systemd-udevd Not tainted 5.12.0-rc2+ #78 [ 1.739077] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda519-p rebuilt.qemu.org 04/01/2014 [ 1.739664] RIP: 0010:0x0 [ 1.739807] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [ 1.740200] RSP: 0018:ffffc9000027ba10 EFLAGS: 00010202 [ 1.740478] RAX: 0000000000000000 RBX: ffff888102f41840 RCX: 0000000000000027 [ 1.740853] RDX: 00000000000000ff RSI: 0000000000000020 RDI: ffff888102f41800 [ 1.741226] RBP: ffffc9000027ba20 R08: ffff88817bc18440 R09: ffffc9000027b808 [ 1.741600] R10: 0000000000000001 R11: 0000000000000001 R12: ffff888102f41840 [ 1.741976] R13: 00000000fffffffb R14: ffff888102f41800 R15: ffff8881008b0000 [ 1.742351] FS: 00007fda3a38a8c0(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000 [ 1.742774] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.743076] CR2: ffffffffffffffd6 CR3: 00000001021ec000 CR4: 00000000000006f0 [ 1.743452] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1.743828] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1.744206] Call Trace: [ 1.744339] isac_release+0xcc/0xe0 [mISDNipac] [ 1.744582] fritzpci_probe.cold+0x282/0x739 [avmfritz] [ 1.744861] local_pci_probe+0x48/0x80 [ 1.745063] pci_device_probe+0x10f/0x1c0 [ 1.745278] really_probe+0xfb/0x420 [ 1.745471] driver_probe_device+0xe9/0x160 [ 1.745693] device_driver_attach+0x5d/0x70 [ 1.745917] __driver_attach+0x8f/0x150 [ 1.746123] ? device_driver_attach+0x70/0x70 [ 1.746354] bus_for_each_dev+0x7e/0xc0 [ 1.746560] driver_attach+0x1e/0x20 [ 1.746751] bus_add_driver+0x152/0x1f0 [ 1.746957] driver_register+0x74/0xd0 [ 1.747157] ? 0xffffffffc00d8000 [ 1.747334] __pci_register_driver+0x54/0x60 [ 1.747562] AVM_init+0x36/0x1000 [avmfritz] [ 1.747791] do_one_initcall+0x48/0x1d0 [ 1.747997] ? __cond_resched+0x19/0x30 [ 1.748206] ? kmem_cache_alloc_trace+0x390/0x440 [ 1.748458] ? do_init_module+0x28/0x250 [ 1.748669] do_init_module+0x62/0x250 [ 1.748870] load_module+0x23ee/0x26a0 [ 1.749073] __do_sys_finit_module+0xc2/0x120 [ 1.749307] ? __do_sys_finit_module+0xc2/0x120 [ 1.749549] __x64_sys_finit_module+0x1a/0x20 [ 1.749782] do_syscall_64+0x38/0x90 Signed-off-by: Tong Zhang Signed-off-by: David S. Miller --- drivers/isdn/hardware/mISDN/mISDNipac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/isdn/hardware/mISDN/mISDNipac.c b/drivers/isdn/hardware/mISDN/mISDNipac.c index ec475087fbf9..39f841b42488 100644 --- a/drivers/isdn/hardware/mISDN/mISDNipac.c +++ b/drivers/isdn/hardware/mISDN/mISDNipac.c @@ -694,7 +694,7 @@ isac_release(struct isac_hw *isac) { if (isac->type & IPAC_TYPE_ISACX) WriteISAC(isac, ISACX_MASK, 0xff); - else + else if (isac->type != 0) WriteISAC(isac, ISAC_MASK, 0xff); if (isac->dch.timer.function != NULL) { del_timer(&isac->dch.timer); -- cgit v1.2.3 From 7a1468ba0e02eee24ae1353e8933793a27198e20 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 10 Mar 2021 20:53:42 -0800 Subject: net: phy: broadcom: Add power down exit reset state delay Per the datasheet, when we clear the power down bit, the PHY remains in an internal reset state for 40us and then resume normal operation. Account for that delay to avoid any issues in the future if genphy_resume() changes. Fixes: fe26821fa614 ("net: phy: broadcom: Wire suspend/resume for BCM54810") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/broadcom.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c index fa0be591ae79..ad51f1889435 100644 --- a/drivers/net/phy/broadcom.c +++ b/drivers/net/phy/broadcom.c @@ -399,6 +399,11 @@ static int bcm54xx_resume(struct phy_device *phydev) if (ret < 0) return ret; + /* Upon exiting power down, the PHY remains in an internal reset state + * for 40us + */ + fsleep(40); + return bcm54xx_config_init(phydev); } -- cgit v1.2.3 From ed0907e3bdcfc7fe1c1756a480451e757b207a69 Mon Sep 17 00:00:00 2001 From: Magnus Karlsson Date: Fri, 5 Feb 2021 10:09:04 +0100 Subject: ice: fix napi work done reporting in xsk path Fix the wrong napi work done reporting in the xsk path of the ice driver. The code in the main Rx processing loop was written to assume that the buffer allocation code returns true if all allocations where successful and false if not. In contrast with all other Intel NIC xsk drivers, the ice_alloc_rx_bufs_zc() has the inverted logic messing up the work done reporting in the napi loop. This can be fixed either by inverting the return value from ice_alloc_rx_bufs_zc() in the function that uses this in an incorrect way, or by changing the return value of ice_alloc_rx_bufs_zc(). We chose the latter as it makes all the xsk allocation functions for Intel NICs behave in the same way. My guess is that it was this unexpected discrepancy that gave rise to this bug in the first place. Fixes: 5bb0c4b5eb61 ("ice, xsk: Move Rx allocation out of while-loop") Reported-by: Maciej Fijalkowski Signed-off-by: Magnus Karlsson Tested-by: Kiran Bhandare Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice_base.c | 6 ++++-- drivers/net/ethernet/intel/ice/ice_xsk.c | 10 +++++----- 2 files changed, 9 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ice/ice_base.c b/drivers/net/ethernet/intel/ice/ice_base.c index 3124a3bf519a..952e41a1e001 100644 --- a/drivers/net/ethernet/intel/ice/ice_base.c +++ b/drivers/net/ethernet/intel/ice/ice_base.c @@ -418,6 +418,8 @@ int ice_setup_rx_ctx(struct ice_ring *ring) writel(0, ring->tail); if (ring->xsk_pool) { + bool ok; + if (!xsk_buff_can_alloc(ring->xsk_pool, num_bufs)) { dev_warn(dev, "XSK buffer pool does not provide enough addresses to fill %d buffers on Rx ring %d\n", num_bufs, ring->q_index); @@ -426,8 +428,8 @@ int ice_setup_rx_ctx(struct ice_ring *ring) return 0; } - err = ice_alloc_rx_bufs_zc(ring, num_bufs); - if (err) + ok = ice_alloc_rx_bufs_zc(ring, num_bufs); + if (!ok) dev_info(dev, "Failed to allocate some buffers on XSK buffer pool enabled Rx ring %d (pf_q %d)\n", ring->q_index, pf_q); return 0; diff --git a/drivers/net/ethernet/intel/ice/ice_xsk.c b/drivers/net/ethernet/intel/ice/ice_xsk.c index 83f3c9574ed1..9f94d9159acd 100644 --- a/drivers/net/ethernet/intel/ice/ice_xsk.c +++ b/drivers/net/ethernet/intel/ice/ice_xsk.c @@ -358,18 +358,18 @@ xsk_pool_if_up: * This function allocates a number of Rx buffers from the fill ring * or the internal recycle mechanism and places them on the Rx ring. * - * Returns false if all allocations were successful, true if any fail. + * Returns true if all allocations were successful, false if any fail. */ bool ice_alloc_rx_bufs_zc(struct ice_ring *rx_ring, u16 count) { union ice_32b_rx_flex_desc *rx_desc; u16 ntu = rx_ring->next_to_use; struct ice_rx_buf *rx_buf; - bool ret = false; + bool ok = true; dma_addr_t dma; if (!count) - return false; + return true; rx_desc = ICE_RX_DESC(rx_ring, ntu); rx_buf = &rx_ring->rx_buf[ntu]; @@ -377,7 +377,7 @@ bool ice_alloc_rx_bufs_zc(struct ice_ring *rx_ring, u16 count) do { rx_buf->xdp = xsk_buff_alloc(rx_ring->xsk_pool); if (!rx_buf->xdp) { - ret = true; + ok = false; break; } @@ -402,7 +402,7 @@ bool ice_alloc_rx_bufs_zc(struct ice_ring *rx_ring, u16 count) ice_release_rx_desc(rx_ring, ntu); } - return ret; + return ok; } /** -- cgit v1.2.3 From a86606268ec0c809f341cda3771ae53460e064ab Mon Sep 17 00:00:00 2001 From: Maciej Fijalkowski Date: Wed, 3 Mar 2021 16:39:26 +0100 Subject: i40e: move headroom initialization to i40e_configure_rx_ring i40e_rx_offset(), that is supposed to initialize the Rx buffer headroom, relies on I40E_RXR_FLAGS_BUILD_SKB_ENABLED flag. Currently, the callsite of mentioned function is placed incorrectly within i40e_setup_rx_descriptors() where Rx ring's build skb flag is not set yet. This causes the XDP_REDIRECT to be partially broken due to inability to create xdp_frame in the headroom space, as the headroom is 0. For the record, below is the call graph: i40e_vsi_open i40e_vsi_setup_rx_resources i40e_setup_rx_descriptors i40e_rx_offset() <-- sets offset to 0 as build_skb flag is set below i40e_vsi_configure_rx i40e_configure_rx_ring set_ring_build_skb_enabled(ring) <-- set build_skb flag Fix this by moving i40e_rx_offset() to i40e_configure_rx_ring() after the flag setting. Fixes: f7bb0d71d658 ("i40e: store the result of i40e_rx_offset() onto i40e_ring") Reported-by: Jesper Dangaard Brouer Co-developed-by: Jesper Dangaard Brouer Signed-off-by: Jesper Dangaard Brouer Signed-off-by: Maciej Fijalkowski Acked-by: Jesper Dangaard Brouer Tested-by: Jesper Dangaard Brouer Tested-by: Kiran Bhandare Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/i40e/i40e_main.c | 13 +++++++++++++ drivers/net/ethernet/intel/i40e/i40e_txrx.c | 12 ------------ 2 files changed, 13 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 353deae139f9..17f3b800640e 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -3258,6 +3258,17 @@ static int i40e_configure_tx_ring(struct i40e_ring *ring) return 0; } +/** + * i40e_rx_offset - Return expected offset into page to access data + * @rx_ring: Ring we are requesting offset of + * + * Returns the offset value for ring into the data buffer. + */ +static unsigned int i40e_rx_offset(struct i40e_ring *rx_ring) +{ + return ring_uses_build_skb(rx_ring) ? I40E_SKB_PAD : 0; +} + /** * i40e_configure_rx_ring - Configure a receive ring context * @ring: The Rx ring to configure @@ -3369,6 +3380,8 @@ static int i40e_configure_rx_ring(struct i40e_ring *ring) else set_ring_build_skb_enabled(ring); + ring->rx_offset = i40e_rx_offset(ring); + /* cache tail for quicker writes, and clear the reg before use */ ring->tail = hw->hw_addr + I40E_QRX_TAIL(pf_q); writel(0, ring->tail); diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c index 627794b31e33..5747a99122fb 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c @@ -1569,17 +1569,6 @@ void i40e_free_rx_resources(struct i40e_ring *rx_ring) } } -/** - * i40e_rx_offset - Return expected offset into page to access data - * @rx_ring: Ring we are requesting offset of - * - * Returns the offset value for ring into the data buffer. - */ -static unsigned int i40e_rx_offset(struct i40e_ring *rx_ring) -{ - return ring_uses_build_skb(rx_ring) ? I40E_SKB_PAD : 0; -} - /** * i40e_setup_rx_descriptors - Allocate Rx descriptors * @rx_ring: Rx descriptor ring (for a specific queue) to setup @@ -1608,7 +1597,6 @@ int i40e_setup_rx_descriptors(struct i40e_ring *rx_ring) rx_ring->next_to_alloc = 0; rx_ring->next_to_clean = 0; rx_ring->next_to_use = 0; - rx_ring->rx_offset = i40e_rx_offset(rx_ring); /* XDP RX-queue info only needed for RX rings exposed to XDP */ if (rx_ring->vsi->type == I40E_VSI_MAIN) { -- cgit v1.2.3 From 89861c485c6a384e298fb78660d6a773339e42b1 Mon Sep 17 00:00:00 2001 From: Maciej Fijalkowski Date: Wed, 3 Mar 2021 16:39:27 +0100 Subject: ice: move headroom initialization to ice_setup_rx_ctx ice_rx_offset(), that is supposed to initialize the Rx buffer headroom, relies on ICE_RX_FLAGS_RING_BUILD_SKB flag as well as XDP prog presence. Currently, the callsite of mentioned function is placed incorrectly within ice_setup_rx_ring() where Rx ring's build skb flag is not set yet. This causes the XDP_REDIRECT to be partially broken due to inability to create xdp_frame in the headroom space, as the headroom is 0. Fix this by moving ice_rx_offset() to ice_setup_rx_ctx() after the flag setting. Fixes: f1b1f409bf79 ("ice: store the result of ice_rx_offset() onto ice_ring") Signed-off-by: Maciej Fijalkowski Tested-by: Kiran Bhandare Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice_base.c | 18 ++++++++++++++++++ drivers/net/ethernet/intel/ice/ice_txrx.c | 17 ----------------- 2 files changed, 18 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ice/ice_base.c b/drivers/net/ethernet/intel/ice/ice_base.c index 952e41a1e001..1148d768f8ed 100644 --- a/drivers/net/ethernet/intel/ice/ice_base.c +++ b/drivers/net/ethernet/intel/ice/ice_base.c @@ -274,6 +274,22 @@ ice_setup_tx_ctx(struct ice_ring *ring, struct ice_tlan_ctx *tlan_ctx, u16 pf_q) tlan_ctx->legacy_int = ICE_TX_LEGACY; } +/** + * ice_rx_offset - Return expected offset into page to access data + * @rx_ring: Ring we are requesting offset of + * + * Returns the offset value for ring into the data buffer. + */ +static unsigned int ice_rx_offset(struct ice_ring *rx_ring) +{ + if (ice_ring_uses_build_skb(rx_ring)) + return ICE_SKB_PAD; + else if (ice_is_xdp_ena_vsi(rx_ring->vsi)) + return XDP_PACKET_HEADROOM; + + return 0; +} + /** * ice_setup_rx_ctx - Configure a receive ring context * @ring: The Rx ring to configure @@ -413,6 +429,8 @@ int ice_setup_rx_ctx(struct ice_ring *ring) else ice_set_ring_build_skb_ena(ring); + ring->rx_offset = ice_rx_offset(ring); + /* init queue specific tail register */ ring->tail = hw->hw_addr + QRX_TAIL(pf_q); writel(0, ring->tail); diff --git a/drivers/net/ethernet/intel/ice/ice_txrx.c b/drivers/net/ethernet/intel/ice/ice_txrx.c index b7dc25da1202..b91dcfd12727 100644 --- a/drivers/net/ethernet/intel/ice/ice_txrx.c +++ b/drivers/net/ethernet/intel/ice/ice_txrx.c @@ -443,22 +443,6 @@ void ice_free_rx_ring(struct ice_ring *rx_ring) } } -/** - * ice_rx_offset - Return expected offset into page to access data - * @rx_ring: Ring we are requesting offset of - * - * Returns the offset value for ring into the data buffer. - */ -static unsigned int ice_rx_offset(struct ice_ring *rx_ring) -{ - if (ice_ring_uses_build_skb(rx_ring)) - return ICE_SKB_PAD; - else if (ice_is_xdp_ena_vsi(rx_ring->vsi)) - return XDP_PACKET_HEADROOM; - - return 0; -} - /** * ice_setup_rx_ring - Allocate the Rx descriptors * @rx_ring: the Rx ring to set up @@ -493,7 +477,6 @@ int ice_setup_rx_ring(struct ice_ring *rx_ring) rx_ring->next_to_use = 0; rx_ring->next_to_clean = 0; - rx_ring->rx_offset = ice_rx_offset(rx_ring); if (ice_is_xdp_ena_vsi(rx_ring->vsi)) WRITE_ONCE(rx_ring->xdp_prog, rx_ring->vsi->xdp_prog); -- cgit v1.2.3 From 76064573b121a376fe54a2799ee6b5bb91632a1f Mon Sep 17 00:00:00 2001 From: Maciej Fijalkowski Date: Wed, 3 Mar 2021 16:39:28 +0100 Subject: ixgbe: move headroom initialization to ixgbe_configure_rx_ring ixgbe_rx_offset(), that is supposed to initialize the Rx buffer headroom, relies on __IXGBE_RX_BUILD_SKB_ENABLED flag. Currently, the callsite of mentioned function is placed incorrectly within ixgbe_setup_rx_resources() where Rx ring's build skb flag is not set yet. This causes the XDP_REDIRECT to be partially broken due to inability to create xdp_frame in the headroom space, as the headroom is 0. Fix this by moving ixgbe_rx_offset() to ixgbe_configure_rx_ring() after the flag setting, which happens to be set in ixgbe_set_rx_buffer_len. Fixes: c0d4e9d223c5 ("ixgbe: store the result of ixgbe_rx_offset() onto ixgbe_ring") Signed-off-by: Maciej Fijalkowski Tested-by: Vishakha Jambekar Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 9f3f12e2ccf2..03d9aad516d4 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -4118,6 +4118,8 @@ void ixgbe_configure_rx_ring(struct ixgbe_adapter *adapter, #endif } + ring->rx_offset = ixgbe_rx_offset(ring); + if (ring->xsk_pool && hw->mac.type != ixgbe_mac_82599EB) { u32 xsk_buf_len = xsk_pool_get_rx_frame_size(ring->xsk_pool); @@ -6578,7 +6580,6 @@ int ixgbe_setup_rx_resources(struct ixgbe_adapter *adapter, rx_ring->next_to_clean = 0; rx_ring->next_to_use = 0; - rx_ring->rx_offset = ixgbe_rx_offset(rx_ring); /* XDP RX-queue info */ if (xdp_rxq_info_reg(&rx_ring->xdp_rxq, adapter->netdev, -- cgit v1.2.3 From 98dfb02aa22280bd8833836d1b00ab0488fa951f Mon Sep 17 00:00:00 2001 From: Li RongQing Date: Thu, 21 Jan 2021 13:54:23 -0800 Subject: igb: avoid premature Rx buffer reuse Igb needs a similar fix as commit 75aab4e10ae6a ("i40e: avoid premature Rx buffer reuse") The page recycle code, incorrectly, relied on that a page fragment could not be freed inside xdp_do_redirect(). This assumption leads to that page fragments that are used by the stack/XDP redirect can be reused and overwritten. To avoid this, store the page count prior invoking xdp_do_redirect(). Longer explanation: Intel NICs have a recycle mechanism. The main idea is that a page is split into two parts. One part is owned by the driver, one part might be owned by someone else, such as the stack. t0: Page is allocated, and put on the Rx ring +--------------- used by NIC ->| upper buffer (rx_buffer) +--------------- | lower buffer +--------------- page count == USHRT_MAX rx_buffer->pagecnt_bias == USHRT_MAX t1: Buffer is received, and passed to the stack (e.g.) +--------------- | upper buff (skb) +--------------- used by NIC ->| lower buffer (rx_buffer) +--------------- page count == USHRT_MAX rx_buffer->pagecnt_bias == USHRT_MAX - 1 t2: Buffer is received, and redirected +--------------- | upper buff (skb) +--------------- used by NIC ->| lower buffer (rx_buffer) +--------------- Now, prior calling xdp_do_redirect(): page count == USHRT_MAX rx_buffer->pagecnt_bias == USHRT_MAX - 2 This means that buffer *cannot* be flipped/reused, because the skb is still using it. The problem arises when xdp_do_redirect() actually frees the segment. Then we get: page count == USHRT_MAX - 1 rx_buffer->pagecnt_bias == USHRT_MAX - 2 From a recycle perspective, the buffer can be flipped and reused, which means that the skb data area is passed to the Rx HW ring! To work around this, the page count is stored prior calling xdp_do_redirect(). Fixes: 9cbc948b5a20 ("igb: add XDP support") Signed-off-by: Li RongQing Reviewed-by: Alexander Duyck Tested-by: Vishakha Jambekar Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/igb/igb_main.c | 22 +++++++++++++++------- 1 file changed, 15 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 878b31d534ec..d3b37761f637 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -8214,7 +8214,8 @@ static void igb_reuse_rx_page(struct igb_ring *rx_ring, new_buff->pagecnt_bias = old_buff->pagecnt_bias; } -static bool igb_can_reuse_rx_page(struct igb_rx_buffer *rx_buffer) +static bool igb_can_reuse_rx_page(struct igb_rx_buffer *rx_buffer, + int rx_buf_pgcnt) { unsigned int pagecnt_bias = rx_buffer->pagecnt_bias; struct page *page = rx_buffer->page; @@ -8225,7 +8226,7 @@ static bool igb_can_reuse_rx_page(struct igb_rx_buffer *rx_buffer) #if (PAGE_SIZE < 8192) /* if we are only owner of page we can reuse it */ - if (unlikely((page_ref_count(page) - pagecnt_bias) > 1)) + if (unlikely((rx_buf_pgcnt - pagecnt_bias) > 1)) return false; #else #define IGB_LAST_OFFSET \ @@ -8614,11 +8615,17 @@ static unsigned int igb_rx_offset(struct igb_ring *rx_ring) } static struct igb_rx_buffer *igb_get_rx_buffer(struct igb_ring *rx_ring, - const unsigned int size) + const unsigned int size, int *rx_buf_pgcnt) { struct igb_rx_buffer *rx_buffer; rx_buffer = &rx_ring->rx_buffer_info[rx_ring->next_to_clean]; + *rx_buf_pgcnt = +#if (PAGE_SIZE < 8192) + page_count(rx_buffer->page); +#else + 0; +#endif prefetchw(rx_buffer->page); /* we are reusing so sync this buffer for CPU use */ @@ -8634,9 +8641,9 @@ static struct igb_rx_buffer *igb_get_rx_buffer(struct igb_ring *rx_ring, } static void igb_put_rx_buffer(struct igb_ring *rx_ring, - struct igb_rx_buffer *rx_buffer) + struct igb_rx_buffer *rx_buffer, int rx_buf_pgcnt) { - if (igb_can_reuse_rx_page(rx_buffer)) { + if (igb_can_reuse_rx_page(rx_buffer, rx_buf_pgcnt)) { /* hand second half of page back to the ring */ igb_reuse_rx_page(rx_ring, rx_buffer); } else { @@ -8664,6 +8671,7 @@ static int igb_clean_rx_irq(struct igb_q_vector *q_vector, const int budget) unsigned int xdp_xmit = 0; struct xdp_buff xdp; u32 frame_sz = 0; + int rx_buf_pgcnt; /* Frame size depend on rx_ring setup when PAGE_SIZE=4K */ #if (PAGE_SIZE < 8192) @@ -8693,7 +8701,7 @@ static int igb_clean_rx_irq(struct igb_q_vector *q_vector, const int budget) */ dma_rmb(); - rx_buffer = igb_get_rx_buffer(rx_ring, size); + rx_buffer = igb_get_rx_buffer(rx_ring, size, &rx_buf_pgcnt); /* retrieve a buffer from the ring */ if (!skb) { @@ -8736,7 +8744,7 @@ static int igb_clean_rx_irq(struct igb_q_vector *q_vector, const int budget) break; } - igb_put_rx_buffer(rx_ring, rx_buffer); + igb_put_rx_buffer(rx_ring, rx_buffer, rx_buf_pgcnt); cleaned_count++; /* fetch next buffer in frame if non-eop */ -- cgit v1.2.3 From 080bfa1e6d928a5d1f185cc44e5f3c251df06df5 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 12 Mar 2021 12:15:03 -0800 Subject: Revert "net: bonding: fix error return code of bond_neigh_init()" This reverts commit 2055a99da8a253a357bdfd359b3338ef3375a26c. This change rejects legitimate configurations. A slave doesn't need to exist nor implement ndo_slave_setup. Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 456315bef3a8..74cbbb22470b 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -3978,15 +3978,11 @@ static int bond_neigh_init(struct neighbour *n) rcu_read_lock(); slave = bond_first_slave_rcu(bond); - if (!slave) { - ret = -EINVAL; + if (!slave) goto out; - } slave_ops = slave->dev->netdev_ops; - if (!slave_ops->ndo_neigh_setup) { - ret = -EINVAL; + if (!slave_ops->ndo_neigh_setup) goto out; - } /* TODO: find another way [1] to implement this. * Passing a zeroed structure is fragile, -- cgit v1.2.3 From 59cd4f19267a0aab87a8c07e4426eb7187ee548d Mon Sep 17 00:00:00 2001 From: Robert Hancock Date: Thu, 11 Mar 2021 14:05:18 -0600 Subject: net: axienet: Fix probe error cleanup The driver did not always clean up all allocated resources when probe failed. Fix the probe cleanup path to clean up everything that was allocated. Fixes: 57baf8cc70ea ("net: axienet: Handle deferred probe on clock properly") Signed-off-by: Robert Hancock Signed-off-by: David S. Miller --- drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 37 +++++++++++++++-------- 1 file changed, 25 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c index 3a8775e0ca55..5d677db0aee5 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -1880,7 +1880,7 @@ static int axienet_probe(struct platform_device *pdev) if (IS_ERR(lp->regs)) { dev_err(&pdev->dev, "could not map Axi Ethernet regs.\n"); ret = PTR_ERR(lp->regs); - goto free_netdev; + goto cleanup_clk; } lp->regs_start = ethres->start; @@ -1958,18 +1958,18 @@ static int axienet_probe(struct platform_device *pdev) break; default: ret = -EINVAL; - goto free_netdev; + goto cleanup_clk; } } else { ret = of_get_phy_mode(pdev->dev.of_node, &lp->phy_mode); if (ret) - goto free_netdev; + goto cleanup_clk; } if (lp->switch_x_sgmii && lp->phy_mode != PHY_INTERFACE_MODE_SGMII && lp->phy_mode != PHY_INTERFACE_MODE_1000BASEX) { dev_err(&pdev->dev, "xlnx,switch-x-sgmii only supported with SGMII or 1000BaseX\n"); ret = -EINVAL; - goto free_netdev; + goto cleanup_clk; } /* Find the DMA node, map the DMA registers, and decode the DMA IRQs */ @@ -1982,7 +1982,7 @@ static int axienet_probe(struct platform_device *pdev) dev_err(&pdev->dev, "unable to get DMA resource\n"); of_node_put(np); - goto free_netdev; + goto cleanup_clk; } lp->dma_regs = devm_ioremap_resource(&pdev->dev, &dmares); @@ -2002,12 +2002,12 @@ static int axienet_probe(struct platform_device *pdev) if (IS_ERR(lp->dma_regs)) { dev_err(&pdev->dev, "could not map DMA regs\n"); ret = PTR_ERR(lp->dma_regs); - goto free_netdev; + goto cleanup_clk; } if ((lp->rx_irq <= 0) || (lp->tx_irq <= 0)) { dev_err(&pdev->dev, "could not determine irqs\n"); ret = -ENOMEM; - goto free_netdev; + goto cleanup_clk; } /* Autodetect the need for 64-bit DMA pointers. @@ -2037,7 +2037,7 @@ static int axienet_probe(struct platform_device *pdev) ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(addr_width)); if (ret) { dev_err(&pdev->dev, "No suitable DMA available\n"); - goto free_netdev; + goto cleanup_clk; } /* Check for Ethernet core IRQ (optional) */ @@ -2068,12 +2068,12 @@ static int axienet_probe(struct platform_device *pdev) if (!lp->phy_node) { dev_err(&pdev->dev, "phy-handle required for 1000BaseX/SGMII\n"); ret = -EINVAL; - goto free_netdev; + goto cleanup_mdio; } lp->pcs_phy = of_mdio_find_device(lp->phy_node); if (!lp->pcs_phy) { ret = -EPROBE_DEFER; - goto free_netdev; + goto cleanup_mdio; } lp->phylink_config.pcs_poll = true; } @@ -2087,17 +2087,30 @@ static int axienet_probe(struct platform_device *pdev) if (IS_ERR(lp->phylink)) { ret = PTR_ERR(lp->phylink); dev_err(&pdev->dev, "phylink_create error (%i)\n", ret); - goto free_netdev; + goto cleanup_mdio; } ret = register_netdev(lp->ndev); if (ret) { dev_err(lp->dev, "register_netdev() error (%i)\n", ret); - goto free_netdev; + goto cleanup_phylink; } return 0; +cleanup_phylink: + phylink_destroy(lp->phylink); + +cleanup_mdio: + if (lp->pcs_phy) + put_device(&lp->pcs_phy->dev); + if (lp->mii_bus) + axienet_mdio_teardown(lp); + of_node_put(lp->phy_node); + +cleanup_clk: + clk_disable_unprepare(lp->clk); + free_netdev: free_netdev(ndev); -- cgit v1.2.3 From 6897087323a2fde46df32917462750c069668b2f Mon Sep 17 00:00:00 2001 From: Dylan Hung Date: Fri, 12 Mar 2021 11:04:05 +1030 Subject: ftgmac100: Restart MAC HW once The interrupt handler may set the flag to reset the mac in the future, but that flag is not cleared once the reset has occurred. Fixes: 10cbd6407609 ("ftgmac100: Rework NAPI & interrupts handling") Signed-off-by: Dylan Hung Acked-by: Benjamin Herrenschmidt Reviewed-by: Joel Stanley Signed-off-by: Joel Stanley Signed-off-by: David S. Miller --- drivers/net/ethernet/faraday/ftgmac100.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c index 88bfe2107938..04421aec2dfd 100644 --- a/drivers/net/ethernet/faraday/ftgmac100.c +++ b/drivers/net/ethernet/faraday/ftgmac100.c @@ -1337,6 +1337,7 @@ static int ftgmac100_poll(struct napi_struct *napi, int budget) */ if (unlikely(priv->need_mac_restart)) { ftgmac100_start_hw(priv); + priv->need_mac_restart = false; /* Re-enable "bad" interrupts */ iowrite32(FTGMAC100_INT_BAD, -- cgit v1.2.3 From b1dd9bf688b0dcc5a34dca660de46c7570bd9243 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 11 Mar 2021 16:52:50 -0800 Subject: net: phy: broadcom: Fix RGMII delays for BCM50160 and BCM50610M The PHY driver entry for BCM50160 and BCM50610M calls bcm54xx_config_init() but does not call bcm54xx_config_clock_delay() in order to configuration appropriate clock delays on the PHY, fix that. Fixes: 733336262b28 ("net: phy: Allow BCM5481x PHYs to setup internal TX/RX clock delay") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/broadcom.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c index ad51f1889435..82fe5f43f0e9 100644 --- a/drivers/net/phy/broadcom.c +++ b/drivers/net/phy/broadcom.c @@ -342,6 +342,10 @@ static int bcm54xx_config_init(struct phy_device *phydev) bcm54xx_adjust_rxrefclk(phydev); switch (BRCM_PHY_MODEL(phydev)) { + case PHY_ID_BCM50610: + case PHY_ID_BCM50610M: + err = bcm54xx_config_clock_delay(phydev); + break; case PHY_ID_BCM54210E: err = bcm54210e_config_init(phydev); break; -- cgit v1.2.3 From c3b8e07909dbe67b0d580416c1a5257643a73be7 Mon Sep 17 00:00:00 2001 From: Ilya Lipnitskiy Date: Fri, 12 Mar 2021 00:07:03 -0800 Subject: net: dsa: mt7530: setup core clock even in TRGMII mode A recent change to MIPS ralink reset logic made it so mt7530 actually resets the switch on platforms such as mt7621 (where bit 2 is the reset line for the switch). That exposed an issue where the switch would not function properly in TRGMII mode after a reset. Reconfigure core clock in TRGMII mode to fix the issue. Tested on Ubiquiti ER-X (MT7621) with TRGMII mode enabled. Fixes: 3f9ef7785a9c ("MIPS: ralink: manage low reset lines") Signed-off-by: Ilya Lipnitskiy Signed-off-by: David S. Miller --- drivers/net/dsa/mt7530.c | 52 +++++++++++++++++++++++------------------------- 1 file changed, 25 insertions(+), 27 deletions(-) (limited to 'drivers') diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index f06f5fa2f898..9871d7cff93a 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -436,34 +436,32 @@ mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface) TD_DM_DRVP(8) | TD_DM_DRVN(8)); /* Setup core clock for MT7530 */ - if (!trgint) { - /* Disable MT7530 core clock */ - core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN); - - /* Disable PLL, since phy_device has not yet been created - * provided for phy_[read,write]_mmd_indirect is called, we - * provide our own core_write_mmd_indirect to complete this - * function. - */ - core_write_mmd_indirect(priv, - CORE_GSWPLL_GRP1, - MDIO_MMD_VEND2, - 0); - - /* Set core clock into 500Mhz */ - core_write(priv, CORE_GSWPLL_GRP2, - RG_GSWPLL_POSDIV_500M(1) | - RG_GSWPLL_FBKDIV_500M(25)); + /* Disable MT7530 core clock */ + core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN); - /* Enable PLL */ - core_write(priv, CORE_GSWPLL_GRP1, - RG_GSWPLL_EN_PRE | - RG_GSWPLL_POSDIV_200M(2) | - RG_GSWPLL_FBKDIV_200M(32)); - - /* Enable MT7530 core clock */ - core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN); - } + /* Disable PLL, since phy_device has not yet been created + * provided for phy_[read,write]_mmd_indirect is called, we + * provide our own core_write_mmd_indirect to complete this + * function. + */ + core_write_mmd_indirect(priv, + CORE_GSWPLL_GRP1, + MDIO_MMD_VEND2, + 0); + + /* Set core clock into 500Mhz */ + core_write(priv, CORE_GSWPLL_GRP2, + RG_GSWPLL_POSDIV_500M(1) | + RG_GSWPLL_FBKDIV_500M(25)); + + /* Enable PLL */ + core_write(priv, CORE_GSWPLL_GRP1, + RG_GSWPLL_EN_PRE | + RG_GSWPLL_POSDIV_200M(2) | + RG_GSWPLL_FBKDIV_200M(32)); + + /* Enable MT7530 core clock */ + core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN); /* Setup the MT7530 TRGMII Tx Clock */ core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN); -- cgit v1.2.3 From c9b86db274d229a1ab47a4e8e11fa9775fd21cbb Mon Sep 17 00:00:00 2001 From: Taniya Das Date: Wed, 10 Mar 2021 23:48:03 +0530 Subject: clk: qcom: rpmh: Update the XO clock source for SC7280 The bi_tcxo clock source for SC7280 requires a div 4 to derive 19.2MHz from the xo_board. Thus update the same. Fixes: fff2b9a65162 ("clk: qcom: rpmh: Add support for RPMH clocks on SC7280") Signed-off-by: Taniya Das Link: https://lore.kernel.org/r/1615400283-20100-1-git-send-email-tdas@codeaurora.org Signed-off-by: Stephen Boyd --- drivers/clk/qcom/clk-rpmh.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/qcom/clk-rpmh.c b/drivers/clk/qcom/clk-rpmh.c index 91dc390a583b..c623ce900406 100644 --- a/drivers/clk/qcom/clk-rpmh.c +++ b/drivers/clk/qcom/clk-rpmh.c @@ -510,9 +510,12 @@ static const struct clk_rpmh_desc clk_rpmh_sm8350 = { .num_clks = ARRAY_SIZE(sm8350_rpmh_clocks), }; +/* Resource name must match resource id present in cmd-db */ +DEFINE_CLK_RPMH_ARC(sc7280, bi_tcxo, bi_tcxo_ao, "xo.lvl", 0x3, 4); + static struct clk_hw *sc7280_rpmh_clocks[] = { - [RPMH_CXO_CLK] = &sdm845_bi_tcxo.hw, - [RPMH_CXO_CLK_A] = &sdm845_bi_tcxo_ao.hw, + [RPMH_CXO_CLK] = &sc7280_bi_tcxo.hw, + [RPMH_CXO_CLK_A] = &sc7280_bi_tcxo_ao.hw, [RPMH_LN_BB_CLK2] = &sdm845_ln_bb_clk2.hw, [RPMH_LN_BB_CLK2_A] = &sdm845_ln_bb_clk2_ao.hw, [RPMH_RF_CLK1] = &sdm845_rf_clk1.hw, -- cgit v1.2.3 From 0ae67123eafd056cc0e27ab27b0d3c5e4bdaf916 Mon Sep 17 00:00:00 2001 From: Marijn Suijten Date: Wed, 3 Mar 2021 00:41:06 +0100 Subject: clk: qcom: rcg2: Rectify clk_gfx3d rate rounding without mux division In case the mux is not divided parent_req was mistakenly not assigned to leading __clk_determine_rate to determine the best frequency setting for a requested rate of 0, resulting in the msm8996 platform not booting. Rectify this by refactoring the logic to unconditionally assign to parent_req.rate with the clock rate the caller is expecting. Fixes: 7cbb78a99db6 ("clk: qcom: rcg2: Stop hardcoding gfx3d pingpong parent numbers") Reported-by: Konrad Dybcio Tested-by: Konrad Dybcio Reviewed-By: AngeloGioacchino Del Regno Signed-off-by: Marijn Suijten Link: https://lore.kernel.org/r/20210302234106.3418665-1-marijn.suijten@somainline.org Signed-off-by: Stephen Boyd --- drivers/clk/qcom/clk-rcg2.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/qcom/clk-rcg2.c b/drivers/clk/qcom/clk-rcg2.c index 42f13a2d1cc1..05ff3b0d233e 100644 --- a/drivers/clk/qcom/clk-rcg2.c +++ b/drivers/clk/qcom/clk-rcg2.c @@ -730,7 +730,8 @@ static int clk_gfx3d_determine_rate(struct clk_hw *hw, struct clk_rate_request parent_req = { }; struct clk_rcg2_gfx3d *cgfx = to_clk_rcg2_gfx3d(hw); struct clk_hw *xo, *p0, *p1, *p2; - unsigned long request, p0_rate; + unsigned long p0_rate; + u8 mux_div = cgfx->div; int ret; p0 = cgfx->hws[0]; @@ -750,14 +751,15 @@ static int clk_gfx3d_determine_rate(struct clk_hw *hw, return 0; } - request = req->rate; - if (cgfx->div > 1) - parent_req.rate = request = request * cgfx->div; + if (mux_div == 0) + mux_div = 1; + + parent_req.rate = req->rate * mux_div; /* This has to be a fixed rate PLL */ p0_rate = clk_hw_get_rate(p0); - if (request == p0_rate) { + if (parent_req.rate == p0_rate) { req->rate = req->best_parent_rate = p0_rate; req->best_parent_hw = p0; return 0; @@ -765,7 +767,7 @@ static int clk_gfx3d_determine_rate(struct clk_hw *hw, if (req->best_parent_hw == p0) { /* Are we going back to a previously used rate? */ - if (clk_hw_get_rate(p2) == request) + if (clk_hw_get_rate(p2) == parent_req.rate) req->best_parent_hw = p2; else req->best_parent_hw = p1; @@ -780,8 +782,7 @@ static int clk_gfx3d_determine_rate(struct clk_hw *hw, return ret; req->rate = req->best_parent_rate = parent_req.rate; - if (cgfx->div > 1) - req->rate /= cgfx->div; + req->rate /= mux_div; return 0; } -- cgit v1.2.3 From 148ddaa89d4a0a927c4353398096cc33687755c1 Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Wed, 24 Feb 2021 09:50:25 -0800 Subject: clk: qcom: gcc-sc7180: Use floor ops for the correct sdcc1 clk While picking commit a8cd989e1a57 ("mmc: sdhci-msm: Warn about overclocking SD/MMC") back to my tree I was surprised that it was reporting warnings. I thought I fixed those! Looking closer at the fix, I see that I totally bungled it (or at least I halfway bungled it). The SD card clock got fixed (and that was the one I was really focused on fixing), but I totally adjusted the wrong clock for eMMC. Sigh. Let's fix my dumb mistake. Now both SD and eMMC have floor for the "apps" clock. This doesn't matter a lot for the final clock rate for HS400 eMMC but could matter if someone happens to put some slower eMMC on a sc7180. We also transition through some of these lower rates sometimes and having them wrong could cause problems during these transitions. These were the messages I was seeing at boot: mmc1: Card appears overclocked; req 52000000 Hz, actual 100000000 Hz mmc1: Card appears overclocked; req 52000000 Hz, actual 100000000 Hz mmc1: Card appears overclocked; req 104000000 Hz, actual 192000000 Hz Fixes: 6d37a8d19283 ("clk: qcom: gcc-sc7180: Use floor ops for sdcc clks") Signed-off-by: Douglas Anderson Link: https://lore.kernel.org/r/20210224095013.1.I2e2ba4978cfca06520dfb5d757768f9c42140f7c@changeid Reviewed-by: Taniya Das Signed-off-by: Stephen Boyd --- drivers/clk/qcom/gcc-sc7180.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/qcom/gcc-sc7180.c b/drivers/clk/qcom/gcc-sc7180.c index 88e896abb663..da8b627ca156 100644 --- a/drivers/clk/qcom/gcc-sc7180.c +++ b/drivers/clk/qcom/gcc-sc7180.c @@ -620,7 +620,7 @@ static struct clk_rcg2 gcc_sdcc1_apps_clk_src = { .name = "gcc_sdcc1_apps_clk_src", .parent_data = gcc_parent_data_1, .num_parents = 5, - .ops = &clk_rcg2_ops, + .ops = &clk_rcg2_floor_ops, }, }; @@ -642,7 +642,7 @@ static struct clk_rcg2 gcc_sdcc1_ice_core_clk_src = { .name = "gcc_sdcc1_ice_core_clk_src", .parent_data = gcc_parent_data_0, .num_parents = 4, - .ops = &clk_rcg2_floor_ops, + .ops = &clk_rcg2_ops, }, }; -- cgit v1.2.3 From 3a9ef3e11c5d33e5cb355b4aad1a4caad2407541 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Fri, 12 Mar 2021 09:12:48 -0600 Subject: net: ipa: terminate message handler arrays When a QMI handle is initialized, an array of message handler structures is provided, defining how any received message should be handled based on its type and message ID. The QMI core code traverses this array when a message arrives and calls the function associated with the (type, msg_id) found in the array. The array is supposed to be terminated with an empty (all zero) entry though. Without it, an unsupported message will cause the QMI core code to go past the end of the array. Fix this bug, by properly terminating the message handler arrays provided when QMI handles are set up by the IPA driver. Fixes: 530f9216a9537 ("soc: qcom: ipa: AP/modem communications") Reported-by: Sujit Kautkar Signed-off-by: Alex Elder Reviewed-by: Bjorn Andersson Signed-off-by: David S. Miller --- drivers/net/ipa/ipa_qmi.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ipa/ipa_qmi.c b/drivers/net/ipa/ipa_qmi.c index 2fc64483f275..e594bf3b600f 100644 --- a/drivers/net/ipa/ipa_qmi.c +++ b/drivers/net/ipa/ipa_qmi.c @@ -249,6 +249,7 @@ static const struct qmi_msg_handler ipa_server_msg_handlers[] = { .decoded_size = IPA_QMI_DRIVER_INIT_COMPLETE_REQ_SZ, .fn = ipa_server_driver_init_complete, }, + { }, }; /* Handle an INIT_DRIVER response message from the modem. */ @@ -269,6 +270,7 @@ static const struct qmi_msg_handler ipa_client_msg_handlers[] = { .decoded_size = IPA_QMI_INIT_DRIVER_RSP_SZ, .fn = ipa_client_init_driver, }, + { }, }; /* Return a pointer to an init modem driver request structure, which contains -- cgit v1.2.3 From 6577b9a551aedb86bca6d4438c28386361845108 Mon Sep 17 00:00:00 2001 From: Tong Zhang Date: Sun, 14 Mar 2021 14:08:36 -0400 Subject: net: arcnet: com20020 fix error handling There are two issues when handling error case in com20020pci_probe() 1. priv might be not initialized yet when calling com20020pci_remove() from com20020pci_probe(), since the priv is set at the very last but it can jump to error handling in the middle and priv remains NULL. 2. memory leak - the net device is allocated in alloc_arcdev but not properly released if error happens in the middle of the big for loop [ 1.529110] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 1.531447] RIP: 0010:com20020pci_remove+0x15/0x60 [com20020_pci] [ 1.536805] Call Trace: [ 1.536939] com20020pci_probe+0x3f2/0x48c [com20020_pci] [ 1.537226] local_pci_probe+0x48/0x80 [ 1.539918] com20020pci_init+0x3f/0x1000 [com20020_pci] Signed-off-by: Tong Zhang Signed-off-by: David S. Miller --- drivers/net/arcnet/com20020-pci.c | 34 +++++++++++++++++++--------------- 1 file changed, 19 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/net/arcnet/com20020-pci.c b/drivers/net/arcnet/com20020-pci.c index 8bdc44b7e09a..3c8f665c1558 100644 --- a/drivers/net/arcnet/com20020-pci.c +++ b/drivers/net/arcnet/com20020-pci.c @@ -127,6 +127,8 @@ static int com20020pci_probe(struct pci_dev *pdev, int i, ioaddr, ret; struct resource *r; + ret = 0; + if (pci_enable_device(pdev)) return -EIO; @@ -139,6 +141,8 @@ static int com20020pci_probe(struct pci_dev *pdev, priv->ci = ci; mm = &ci->misc_map; + pci_set_drvdata(pdev, priv); + INIT_LIST_HEAD(&priv->list_dev); if (mm->size) { @@ -161,7 +165,7 @@ static int com20020pci_probe(struct pci_dev *pdev, dev = alloc_arcdev(device); if (!dev) { ret = -ENOMEM; - goto out_port; + break; } dev->dev_port = i; @@ -178,7 +182,7 @@ static int com20020pci_probe(struct pci_dev *pdev, pr_err("IO region %xh-%xh already allocated\n", ioaddr, ioaddr + cm->size - 1); ret = -EBUSY; - goto out_port; + goto err_free_arcdev; } /* Dummy access after Reset @@ -216,18 +220,18 @@ static int com20020pci_probe(struct pci_dev *pdev, if (arcnet_inb(ioaddr, COM20020_REG_R_STATUS) == 0xFF) { pr_err("IO address %Xh is empty!\n", ioaddr); ret = -EIO; - goto out_port; + goto err_free_arcdev; } if (com20020_check(dev)) { ret = -EIO; - goto out_port; + goto err_free_arcdev; } card = devm_kzalloc(&pdev->dev, sizeof(struct com20020_dev), GFP_KERNEL); if (!card) { ret = -ENOMEM; - goto out_port; + goto err_free_arcdev; } card->index = i; @@ -253,29 +257,29 @@ static int com20020pci_probe(struct pci_dev *pdev, ret = devm_led_classdev_register(&pdev->dev, &card->tx_led); if (ret) - goto out_port; + goto err_free_arcdev; ret = devm_led_classdev_register(&pdev->dev, &card->recon_led); if (ret) - goto out_port; + goto err_free_arcdev; dev_set_drvdata(&dev->dev, card); ret = com20020_found(dev, IRQF_SHARED); if (ret) - goto out_port; + goto err_free_arcdev; devm_arcnet_led_init(dev, dev->dev_id, i); list_add(&card->list, &priv->list_dev); - } + continue; - pci_set_drvdata(pdev, priv); - - return 0; - -out_port: - com20020pci_remove(pdev); +err_free_arcdev: + free_arcdev(dev); + break; + } + if (ret) + com20020pci_remove(pdev); return ret; } -- cgit v1.2.3 From d3bdd1c3140724967ca4136755538fa7c05c2b4e Mon Sep 17 00:00:00 2001 From: Dinghao Liu Date: Tue, 19 Jan 2021 16:10:55 +0800 Subject: extcon: Fix error handling in extcon_dev_register When devm_kcalloc() fails, we should execute device_unregister() to unregister edev->dev from system. Fixes: 046050f6e623e ("extcon: Update the prototype of extcon_register_notifier() with enum extcon") Signed-off-by: Dinghao Liu Signed-off-by: Chanwoo Choi --- drivers/extcon/extcon.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c index 0a6438cbb3f3..e7a9561a826d 100644 --- a/drivers/extcon/extcon.c +++ b/drivers/extcon/extcon.c @@ -1241,6 +1241,7 @@ int extcon_dev_register(struct extcon_dev *edev) sizeof(*edev->nh), GFP_KERNEL); if (!edev->nh) { ret = -ENOMEM; + device_unregister(&edev->dev); goto err_dev; } -- cgit v1.2.3 From 3b6e7088afc919f5b52e4d2de8501ad34d35b09b Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 12 Mar 2021 14:02:40 +0100 Subject: regulator: bd9571mwv: Fix AVS and DVFS voltage range According to Table 30 ("DVFS_MoniVDAC [6:0] Setting Table") in the BD9571MWV-M Datasheet Rev. 002, the valid voltage range is 600..1100 mV (settings 0x3c..0x6e). While the lower limit is taken into account (by setting regulator_desc.linear_min_sel to 0x3c), the upper limit is not. Fix this by reducing regulator_desc.n_voltages from 0x80 to 0x6f. Fixes: e85c5a153fe237f2 ("regulator: Add ROHM BD9571MWV-M PMIC regulator driver") Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20210312130242.3390038-2-geert+renesas@glider.be Signed-off-by: Mark Brown --- drivers/regulator/bd9571mwv-regulator.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/regulator/bd9571mwv-regulator.c b/drivers/regulator/bd9571mwv-regulator.c index 7b0cd08db446..13393cdc6be1 100644 --- a/drivers/regulator/bd9571mwv-regulator.c +++ b/drivers/regulator/bd9571mwv-regulator.c @@ -125,7 +125,7 @@ static const struct regulator_ops vid_ops = { static const struct regulator_desc regulators[] = { BD9571MWV_REG("VD09", "vd09", VD09, avs_ops, 0, 0x7f, - 0x80, 600000, 10000, 0x3c), + 0x6f, 600000, 10000, 0x3c), BD9571MWV_REG("VD18", "vd18", VD18, vid_ops, BD9571MWV_VD18_VID, 0xf, 16, 1625000, 25000, 0), BD9571MWV_REG("VD25", "vd25", VD25, vid_ops, BD9571MWV_VD25_VID, 0xf, @@ -134,7 +134,7 @@ static const struct regulator_desc regulators[] = { 11, 2800000, 100000, 0), BD9571MWV_REG("DVFS", "dvfs", DVFS, reg_ops, BD9571MWV_DVFS_MONIVDAC, 0x7f, - 0x80, 600000, 10000, 0x3c), + 0x6f, 600000, 10000, 0x3c), }; #ifdef CONFIG_PM_SLEEP -- cgit v1.2.3 From 9cbc23f7d51fb0b1363bdfdd0b770aa7b5982f2f Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 12 Mar 2021 14:02:41 +0100 Subject: regulator: bd9571mwv: Fix regulator name printed on registration failure If a regulator fails to register, the driver prints an error message like: bd9571mwv-regulator bd9571mwv-regulator.6.auto: failed to register bd9571mwv-regulator regulator However, the platform device's name is already printed as part of dev_err(), and does not allow the user to distinguish among the various regulators that are part of the PMIC. Fix this by printing regulator_desc.name instead, to change the message like: bd9571mwv-regulator bd9571mwv-regulator.6.auto: failed to register DVFS regulator Signed-off-by: Geert Uytterhoeven Reviewed-by: Matti Vaittinen Link: https://lore.kernel.org/r/20210312130242.3390038-3-geert+renesas@glider.be Signed-off-by: Mark Brown --- drivers/regulator/bd9571mwv-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/regulator/bd9571mwv-regulator.c b/drivers/regulator/bd9571mwv-regulator.c index 13393cdc6be1..a4d406022587 100644 --- a/drivers/regulator/bd9571mwv-regulator.c +++ b/drivers/regulator/bd9571mwv-regulator.c @@ -301,7 +301,7 @@ static int bd9571mwv_regulator_probe(struct platform_device *pdev) &config); if (IS_ERR(rdev)) { dev_err(&pdev->dev, "failed to register %s regulator\n", - pdev->name); + regulators[i].name); return PTR_ERR(rdev); } } -- cgit v1.2.3 From 1deceabbdc0dd3162def1e26acb2e57a93275909 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 12 Mar 2021 14:02:42 +0100 Subject: regulator: bd9571mwv: Convert device attribute to sysfs_emit() Convert the "backup_mode" device attribute from sprintf() to sysfs_emit(), as the latter is aware of the PAGE_SIZE buffer. Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20210312130242.3390038-4-geert+renesas@glider.be Signed-off-by: Mark Brown --- drivers/regulator/bd9571mwv-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/regulator/bd9571mwv-regulator.c b/drivers/regulator/bd9571mwv-regulator.c index a4d406022587..ba020a45f238 100644 --- a/drivers/regulator/bd9571mwv-regulator.c +++ b/drivers/regulator/bd9571mwv-regulator.c @@ -174,7 +174,7 @@ static ssize_t backup_mode_show(struct device *dev, { struct bd9571mwv_reg *bdreg = dev_get_drvdata(dev); - return sprintf(buf, "%s\n", bdreg->bkup_mode_enabled ? "on" : "off"); + return sysfs_emit(buf, "%s\n", bdreg->bkup_mode_enabled ? "on" : "off"); } static ssize_t backup_mode_store(struct device *dev, -- cgit v1.2.3 From bf0ffea336b493c0a8c8bc27b46683ecf1e8f294 Mon Sep 17 00:00:00 2001 From: Xie He Date: Sun, 14 Mar 2021 04:21:01 -0700 Subject: net: hdlc_x25: Prevent racing between "x25_close" and "x25_xmit"/"x25_rx" "x25_close" is called by "hdlc_close" in "hdlc.c", which is called by hardware drivers' "ndo_stop" function. "x25_xmit" is called by "hdlc_start_xmit" in "hdlc.c", which is hardware drivers' "ndo_start_xmit" function. "x25_rx" is called by "hdlc_rcv" in "hdlc.c", which receives HDLC frames from "net/core/dev.c". "x25_close" races with "x25_xmit" and "x25_rx" because their callers race. However, we need to ensure that the LAPB APIs called in "x25_xmit" and "x25_rx" are called before "lapb_unregister" is called in "x25_close". This patch adds locking to ensure when "x25_xmit" and "x25_rx" are doing their work, "lapb_unregister" is not yet called in "x25_close". Reasons for not solving the racing between "x25_close" and "x25_xmit" by calling "netif_tx_disable" in "x25_close": 1. We still need to solve the racing between "x25_close" and "x25_rx"; 2. The design of the HDLC subsystem assumes the HDLC hardware drivers have full control over the TX queue, and the HDLC protocol drivers (like this driver) have no control. Controlling the queue here in the protocol driver may interfere with hardware drivers' control of the queue. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Xie He Signed-off-by: David S. Miller --- drivers/net/wan/hdlc_x25.c | 42 +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 41 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wan/hdlc_x25.c b/drivers/net/wan/hdlc_x25.c index 4aaa6388b9ee..5a6a945f6c81 100644 --- a/drivers/net/wan/hdlc_x25.c +++ b/drivers/net/wan/hdlc_x25.c @@ -23,6 +23,8 @@ struct x25_state { x25_hdlc_proto settings; + bool up; + spinlock_t up_lock; /* Protects "up" */ }; static int x25_ioctl(struct net_device *dev, struct ifreq *ifr); @@ -104,6 +106,8 @@ static void x25_data_transmit(struct net_device *dev, struct sk_buff *skb) static netdev_tx_t x25_xmit(struct sk_buff *skb, struct net_device *dev) { + hdlc_device *hdlc = dev_to_hdlc(dev); + struct x25_state *x25st = state(hdlc); int result; /* There should be a pseudo header of 1 byte added by upper layers. @@ -114,11 +118,19 @@ static netdev_tx_t x25_xmit(struct sk_buff *skb, struct net_device *dev) return NETDEV_TX_OK; } + spin_lock_bh(&x25st->up_lock); + if (!x25st->up) { + spin_unlock_bh(&x25st->up_lock); + kfree_skb(skb); + return NETDEV_TX_OK; + } + switch (skb->data[0]) { case X25_IFACE_DATA: /* Data to be transmitted */ skb_pull(skb, 1); if ((result = lapb_data_request(dev, skb)) != LAPB_OK) dev_kfree_skb(skb); + spin_unlock_bh(&x25st->up_lock); return NETDEV_TX_OK; case X25_IFACE_CONNECT: @@ -147,6 +159,7 @@ static netdev_tx_t x25_xmit(struct sk_buff *skb, struct net_device *dev) break; } + spin_unlock_bh(&x25st->up_lock); dev_kfree_skb(skb); return NETDEV_TX_OK; } @@ -164,6 +177,7 @@ static int x25_open(struct net_device *dev) .data_transmit = x25_data_transmit, }; hdlc_device *hdlc = dev_to_hdlc(dev); + struct x25_state *x25st = state(hdlc); struct lapb_parms_struct params; int result; @@ -190,6 +204,10 @@ static int x25_open(struct net_device *dev) if (result != LAPB_OK) return -EINVAL; + spin_lock_bh(&x25st->up_lock); + x25st->up = true; + spin_unlock_bh(&x25st->up_lock); + return 0; } @@ -197,6 +215,13 @@ static int x25_open(struct net_device *dev) static void x25_close(struct net_device *dev) { + hdlc_device *hdlc = dev_to_hdlc(dev); + struct x25_state *x25st = state(hdlc); + + spin_lock_bh(&x25st->up_lock); + x25st->up = false; + spin_unlock_bh(&x25st->up_lock); + lapb_unregister(dev); } @@ -205,15 +230,28 @@ static void x25_close(struct net_device *dev) static int x25_rx(struct sk_buff *skb) { struct net_device *dev = skb->dev; + hdlc_device *hdlc = dev_to_hdlc(dev); + struct x25_state *x25st = state(hdlc); if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL) { dev->stats.rx_dropped++; return NET_RX_DROP; } - if (lapb_data_received(dev, skb) == LAPB_OK) + spin_lock_bh(&x25st->up_lock); + if (!x25st->up) { + spin_unlock_bh(&x25st->up_lock); + kfree_skb(skb); + dev->stats.rx_dropped++; + return NET_RX_DROP; + } + + if (lapb_data_received(dev, skb) == LAPB_OK) { + spin_unlock_bh(&x25st->up_lock); return NET_RX_SUCCESS; + } + spin_unlock_bh(&x25st->up_lock); dev->stats.rx_errors++; dev_kfree_skb_any(skb); return NET_RX_DROP; @@ -298,6 +336,8 @@ static int x25_ioctl(struct net_device *dev, struct ifreq *ifr) return result; memcpy(&state(hdlc)->settings, &new_settings, size); + state(hdlc)->up = false; + spin_lock_init(&state(hdlc)->up_lock); /* There's no header_ops so hard_header_len should be 0. */ dev->hard_header_len = 0; -- cgit v1.2.3 From d82c6c1aaccd2877b6082cebcb1746a13648a16d Mon Sep 17 00:00:00 2001 From: Ong Boon Leong Date: Mon, 15 Mar 2021 12:33:42 +0800 Subject: net: phylink: Fix phylink_err() function name error in phylink_major_config if pl->mac_ops->mac_finish() failed, phylink_err should use "mac_finish" instead of "mac_prepare". Fixes: b7ad14c2fe2d4 ("net: phylink: re-implement interface configuration with PCS") Signed-off-by: Ong Boon Leong Signed-off-by: David S. Miller --- drivers/net/phy/phylink.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c index 053c92e02cd8..dc2800beacc3 100644 --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -476,7 +476,7 @@ static void phylink_major_config(struct phylink *pl, bool restart, err = pl->mac_ops->mac_finish(pl->config, pl->cur_link_an_mode, state->interface); if (err < 0) - phylink_err(pl, "mac_prepare failed: %pe\n", + phylink_err(pl, "mac_finish failed: %pe\n", ERR_PTR(err)); } } -- cgit v1.2.3 From 7a1adbd2399023177508836c2b13a6c723035409 Mon Sep 17 00:00:00 2001 From: Kieran Bingham Date: Wed, 13 Jan 2021 17:02:53 +0000 Subject: drm: rcar-du: Use drmm_encoder_alloc() to manage encoder The encoder allocation was converted to a DRM managed resource at the same time as the addition of a new helper drmm_encoder_alloc() which simplifies the same process. Convert the custom drm managed resource allocation of the encoder with the helper to simplify the implementation, and prevent hitting a WARN_ON() due to the handling the drm_encoder_init() call directly without registering a .destroy() function op. Fixes: f5f16725edbc ("drm: rcar-du: Use DRM-managed allocation for encoders") Reported-by: Geert Uytterhoeven Signed-off-by: Kieran Bingham Tested-by: Geert Uytterhoeven Reviewed-by: Laurent Pinchart Signed-off-by: Laurent Pinchart --- drivers/gpu/drm/rcar-du/rcar_du_encoder.c | 31 ++++++------------------------- 1 file changed, 6 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/rcar-du/rcar_du_encoder.c b/drivers/gpu/drm/rcar-du/rcar_du_encoder.c index ba8c6038cd63..ca3761772211 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_encoder.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_encoder.c @@ -48,21 +48,12 @@ static unsigned int rcar_du_encoder_count_ports(struct device_node *node) static const struct drm_encoder_funcs rcar_du_encoder_funcs = { }; -static void rcar_du_encoder_release(struct drm_device *dev, void *res) -{ - struct rcar_du_encoder *renc = res; - - drm_encoder_cleanup(&renc->base); - kfree(renc); -} - int rcar_du_encoder_init(struct rcar_du_device *rcdu, enum rcar_du_output output, struct device_node *enc_node) { struct rcar_du_encoder *renc; struct drm_bridge *bridge; - int ret; /* * Locate the DRM bridge from the DT node. For the DPAD outputs, if the @@ -101,26 +92,16 @@ int rcar_du_encoder_init(struct rcar_du_device *rcdu, return -ENOLINK; } - renc = kzalloc(sizeof(*renc), GFP_KERNEL); - if (renc == NULL) - return -ENOMEM; - - renc->output = output; - dev_dbg(rcdu->dev, "initializing encoder %pOF for output %u\n", enc_node, output); - ret = drm_encoder_init(&rcdu->ddev, &renc->base, &rcar_du_encoder_funcs, - DRM_MODE_ENCODER_NONE, NULL); - if (ret < 0) { - kfree(renc); - return ret; - } + renc = drmm_encoder_alloc(&rcdu->ddev, struct rcar_du_encoder, base, + &rcar_du_encoder_funcs, DRM_MODE_ENCODER_NONE, + NULL); + if (!renc) + return -ENOMEM; - ret = drmm_add_action_or_reset(&rcdu->ddev, rcar_du_encoder_release, - renc); - if (ret) - return ret; + renc->output = output; /* * Attach the bridge to the encoder. The bridge will create the -- cgit v1.2.3 From 3a5ca857079ea022e0b1b17fc154f7ad7dbc150f Mon Sep 17 00:00:00 2001 From: Martin Willi Date: Tue, 2 Mar 2021 13:24:23 +0100 Subject: can: dev: Move device back to init netns on owning netns delete When a non-initial netns is destroyed, the usual policy is to delete all virtual network interfaces contained, but move physical interfaces back to the initial netns. This keeps the physical interface visible on the system. CAN devices are somewhat special, as they define rtnl_link_ops even if they are physical devices. If a CAN interface is moved into a non-initial netns, destroying that netns lets the interface vanish instead of moving it back to the initial netns. default_device_exit() skips CAN interfaces due to having rtnl_link_ops set. Reproducer: ip netns add foo ip link set can0 netns foo ip netns delete foo WARNING: CPU: 1 PID: 84 at net/core/dev.c:11030 ops_exit_list+0x38/0x60 CPU: 1 PID: 84 Comm: kworker/u4:2 Not tainted 5.10.19 #1 Workqueue: netns cleanup_net [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0x94/0xa8) [] (dump_stack) from [] (__warn+0xb8/0x114) [] (__warn) from [] (warn_slowpath_fmt+0x7c/0xac) [] (warn_slowpath_fmt) from [] (ops_exit_list+0x38/0x60) [] (ops_exit_list) from [] (cleanup_net+0x230/0x380) [] (cleanup_net) from [] (process_one_work+0x1d8/0x438) [] (process_one_work) from [] (worker_thread+0x64/0x5a8) [] (worker_thread) from [] (kthread+0x148/0x14c) [] (kthread) from [] (ret_from_fork+0x14/0x2c) To properly restore physical CAN devices to the initial netns on owning netns exit, introduce a flag on rtnl_link_ops that can be set by drivers. For CAN devices setting this flag, default_device_exit() considers them non-virtual, applying the usual namespace move. The issue was introduced in the commit mentioned below, as at that time CAN devices did not have a dellink() operation. Fixes: e008b5fc8dc7 ("net: Simplfy default_device_exit and improve batching.") Link: https://lore.kernel.org/r/20210302122423.872326-1-martin@strongswan.org Signed-off-by: Martin Willi Signed-off-by: Marc Kleine-Budde --- drivers/net/can/dev/netlink.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/can/dev/netlink.c b/drivers/net/can/dev/netlink.c index 867f6be31230..f5d79e6e5483 100644 --- a/drivers/net/can/dev/netlink.c +++ b/drivers/net/can/dev/netlink.c @@ -355,6 +355,7 @@ static void can_dellink(struct net_device *dev, struct list_head *head) struct rtnl_link_ops can_link_ops __read_mostly = { .kind = "can", + .netns_refund = true, .maxtype = IFLA_CAN_MAX, .policy = can_policy, .setup = can_setup, -- cgit v1.2.3 From 59ec7b89ed3e921cd0625a8c83f31a30d485fdf8 Mon Sep 17 00:00:00 2001 From: Stephane Grosjean Date: Tue, 9 Mar 2021 09:21:27 +0100 Subject: can: peak_usb: add forgotten supported devices Since the peak_usb driver also supports the CAN-USB interfaces "PCAN-USB X6" and "PCAN-Chip USB" from PEAK-System GmbH, this patch adds their names to the list of explicitly supported devices. Fixes: ea8b65b596d7 ("can: usb: Add support of PCAN-Chip USB stamp module") Fixes: f00b534ded60 ("can: peak: Add support for PCAN-USB X6 USB interface") Link: https://lore.kernel.org/r/20210309082128.23125-3-s.grosjean@peak-system.com Signed-off-by: Stephane Grosjean Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/peak_usb/pcan_usb_fd.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c index f347ecc79aef..f1d018218c93 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c @@ -18,6 +18,8 @@ MODULE_SUPPORTED_DEVICE("PEAK-System PCAN-USB FD adapter"); MODULE_SUPPORTED_DEVICE("PEAK-System PCAN-USB Pro FD adapter"); +MODULE_SUPPORTED_DEVICE("PEAK-System PCAN-Chip USB"); +MODULE_SUPPORTED_DEVICE("PEAK-System PCAN-USB X6 adapter"); #define PCAN_USBPROFD_CHANNEL_COUNT 2 #define PCAN_USBFD_CHANNEL_COUNT 1 -- cgit v1.2.3 From 47c5e474bc1e1061fb037d13b5000b38967eb070 Mon Sep 17 00:00:00 2001 From: Angelo Dureghello Date: Tue, 16 Mar 2021 00:15:10 +0100 Subject: can: flexcan: flexcan_chip_freeze(): fix chip freeze for missing bitrate For cases when flexcan is built-in, bitrate is still not set at registering. So flexcan_chip_freeze() generates: [ 1.860000] *** ZERO DIVIDE *** FORMAT=4 [ 1.860000] Current process id is 1 [ 1.860000] BAD KERNEL TRAP: 00000000 [ 1.860000] PC: [<402e70c8>] flexcan_chip_freeze+0x1a/0xa8 To allow chip freeze, using an hardcoded timeout when bitrate is still not set. Fixes: ec15e27cc890 ("can: flexcan: enable RX FIFO after FRZ/HALT valid") Link: https://lore.kernel.org/r/20210315231510.650593-1-angelo@kernel-space.org Signed-off-by: Angelo Dureghello [mkl: use if instead of ? operator] Signed-off-by: Marc Kleine-Budde --- drivers/net/can/flexcan.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index 134c05757a3b..57f3635ad8d7 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -697,9 +697,15 @@ static int flexcan_chip_disable(struct flexcan_priv *priv) static int flexcan_chip_freeze(struct flexcan_priv *priv) { struct flexcan_regs __iomem *regs = priv->regs; - unsigned int timeout = 1000 * 1000 * 10 / priv->can.bittiming.bitrate; + unsigned int timeout; + u32 bitrate = priv->can.bittiming.bitrate; u32 reg; + if (bitrate) + timeout = 1000 * 1000 * 10 / bitrate; + else + timeout = FLEXCAN_TIMEOUT_US / 10; + reg = priv->read(®s->mcr); reg |= FLEXCAN_MCR_FRZ | FLEXCAN_MCR_HALT; priv->write(reg, ®s->mcr); -- cgit v1.2.3 From 7c6e6bce08f918b64459415f58061d4d6df44994 Mon Sep 17 00:00:00 2001 From: Jimmy Assarsson Date: Tue, 9 Mar 2021 10:17:23 +0100 Subject: can: kvaser_pciefd: Always disable bus load reporting Under certain circumstances, when switching from Kvaser's linuxcan driver (kvpciefd) to the SocketCAN driver (kvaser_pciefd), the bus load reporting is not disabled. This is flooding the kernel log with prints like: [3485.574677] kvaser_pciefd 0000:02:00.0: Received unexpected packet type 0x00000009 Always put the controller in the expected state, instead of assuming that bus load reporting is inactive. Note: If bus load reporting is enabled when the driver is loaded, you will still get a number of bus load packages (and printouts), before it is disabled. Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Link: https://lore.kernel.org/r/20210309091724.31262-1-jimmyassarsson@gmail.com Signed-off-by: Jimmy Assarsson Signed-off-by: Marc Kleine-Budde --- drivers/net/can/kvaser_pciefd.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/can/kvaser_pciefd.c b/drivers/net/can/kvaser_pciefd.c index 37e05010ca91..74d9899fc904 100644 --- a/drivers/net/can/kvaser_pciefd.c +++ b/drivers/net/can/kvaser_pciefd.c @@ -57,6 +57,7 @@ MODULE_DESCRIPTION("CAN driver for Kvaser CAN/PCIe devices"); #define KVASER_PCIEFD_KCAN_STAT_REG 0x418 #define KVASER_PCIEFD_KCAN_MODE_REG 0x41c #define KVASER_PCIEFD_KCAN_BTRN_REG 0x420 +#define KVASER_PCIEFD_KCAN_BUS_LOAD_REG 0x424 #define KVASER_PCIEFD_KCAN_BTRD_REG 0x428 #define KVASER_PCIEFD_KCAN_PWM_REG 0x430 /* Loopback control register */ @@ -949,6 +950,9 @@ static int kvaser_pciefd_setup_can_ctrls(struct kvaser_pciefd *pcie) timer_setup(&can->bec_poll_timer, kvaser_pciefd_bec_poll_timer, 0); + /* Disable Bus load reporting */ + iowrite32(0, can->reg_base + KVASER_PCIEFD_KCAN_BUS_LOAD_REG); + tx_npackets = ioread32(can->reg_base + KVASER_PCIEFD_KCAN_TX_NPACKETS_REG); if (((tx_npackets >> KVASER_PCIEFD_KCAN_TX_NPACKETS_MAX_SHIFT) & -- cgit v1.2.3 From 7507479c46b120c37ef83e59be7683a526e98e1a Mon Sep 17 00:00:00 2001 From: Jimmy Assarsson Date: Tue, 9 Mar 2021 10:17:24 +0100 Subject: can: kvaser_usb: Add support for USBcan Pro 4xHS Add support for Kvaser USBcan Pro 4xHS. Link: https://lore.kernel.org/r/20210309091724.31262-2-jimmyassarsson@gmail.com Signed-off-by: Jimmy Assarsson Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/Kconfig | 1 + drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c | 4 +++- 2 files changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/can/usb/Kconfig b/drivers/net/can/usb/Kconfig index c1e5d5b570b6..538f4d9adb91 100644 --- a/drivers/net/can/usb/Kconfig +++ b/drivers/net/can/usb/Kconfig @@ -73,6 +73,7 @@ config CAN_KVASER_USB - Kvaser Memorator Pro 5xHS - Kvaser USBcan Light 4xHS - Kvaser USBcan Pro 2xHS v2 + - Kvaser USBcan Pro 4xHS - Kvaser USBcan Pro 5xHS - Kvaser U100 - Kvaser U100P diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c index 2b7efd296758..4e97da8434ab 100644 --- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c +++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c @@ -86,8 +86,9 @@ #define USB_U100_PRODUCT_ID 273 #define USB_U100P_PRODUCT_ID 274 #define USB_U100S_PRODUCT_ID 275 +#define USB_USBCAN_PRO_4HS_PRODUCT_ID 276 #define USB_HYDRA_PRODUCT_ID_END \ - USB_U100S_PRODUCT_ID + USB_USBCAN_PRO_4HS_PRODUCT_ID static inline bool kvaser_is_leaf(const struct usb_device_id *id) { @@ -193,6 +194,7 @@ static const struct usb_device_id kvaser_usb_table[] = { { USB_DEVICE(KVASER_VENDOR_ID, USB_U100_PRODUCT_ID) }, { USB_DEVICE(KVASER_VENDOR_ID, USB_U100P_PRODUCT_ID) }, { USB_DEVICE(KVASER_VENDOR_ID, USB_U100S_PRODUCT_ID) }, + { USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN_PRO_4HS_PRODUCT_ID) }, { } }; MODULE_DEVICE_TABLE(usb, kvaser_usb_table); -- cgit v1.2.3 From 0429d6d89f97ebff4f17f13f5b5069c66bde8138 Mon Sep 17 00:00:00 2001 From: Tong Zhang Date: Sun, 28 Feb 2021 21:45:11 -0500 Subject: can: c_can_pci: c_can_pci_remove(): fix use-after-free There is a UAF in c_can_pci_remove(). dev is released by free_c_can_dev() and is used by pci_iounmap(pdev, priv->base) later. To fix this issue, save the mmio address before releasing dev. Fixes: 5b92da0443c2 ("c_can_pci: generic module for C_CAN/D_CAN on PCI") Link: https://lore.kernel.org/r/20210301024512.539039-1-ztong0001@gmail.com Signed-off-by: Tong Zhang Signed-off-by: Marc Kleine-Budde --- drivers/net/can/c_can/c_can_pci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/can/c_can/c_can_pci.c b/drivers/net/can/c_can/c_can_pci.c index 406b4847e5dc..7efb60b50876 100644 --- a/drivers/net/can/c_can/c_can_pci.c +++ b/drivers/net/can/c_can/c_can_pci.c @@ -239,12 +239,13 @@ static void c_can_pci_remove(struct pci_dev *pdev) { struct net_device *dev = pci_get_drvdata(pdev); struct c_can_priv *priv = netdev_priv(dev); + void __iomem *addr = priv->base; unregister_c_can_dev(dev); free_c_can_dev(dev); - pci_iounmap(pdev, priv->base); + pci_iounmap(pdev, addr); pci_disable_msi(pdev); pci_clear_master(pdev); pci_release_regions(pdev); -- cgit v1.2.3 From 6e2fe01dd6f98da6cae8b07cd5cfa67abc70d97d Mon Sep 17 00:00:00 2001 From: Tong Zhang Date: Mon, 1 Mar 2021 21:55:40 -0500 Subject: can: c_can: move runtime PM enable/disable to c_can_platform MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently doing modprobe c_can_pci will make the kernel complain: Unbalanced pm_runtime_enable! this is caused by pm_runtime_enable() called before pm is initialized. This fix is similar to 227619c3ff7c, move those pm_enable/disable code to c_can_platform. Fixes: 4cdd34b26826 ("can: c_can: Add runtime PM support to Bosch C_CAN/D_CAN controller") Link: http://lore.kernel.org/r/20210302025542.987600-1-ztong0001@gmail.com Signed-off-by: Tong Zhang Tested-by: Uwe Kleine-König Signed-off-by: Marc Kleine-Budde --- drivers/net/can/c_can/c_can.c | 24 +----------------------- drivers/net/can/c_can/c_can_platform.c | 6 +++++- 2 files changed, 6 insertions(+), 24 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index ef474bae47a1..6958830cb983 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -212,18 +212,6 @@ static const struct can_bittiming_const c_can_bittiming_const = { .brp_inc = 1, }; -static inline void c_can_pm_runtime_enable(const struct c_can_priv *priv) -{ - if (priv->device) - pm_runtime_enable(priv->device); -} - -static inline void c_can_pm_runtime_disable(const struct c_can_priv *priv) -{ - if (priv->device) - pm_runtime_disable(priv->device); -} - static inline void c_can_pm_runtime_get_sync(const struct c_can_priv *priv) { if (priv->device) @@ -1335,7 +1323,6 @@ static const struct net_device_ops c_can_netdev_ops = { int register_c_can_dev(struct net_device *dev) { - struct c_can_priv *priv = netdev_priv(dev); int err; /* Deactivate pins to prevent DRA7 DCAN IP from being @@ -1345,28 +1332,19 @@ int register_c_can_dev(struct net_device *dev) */ pinctrl_pm_select_sleep_state(dev->dev.parent); - c_can_pm_runtime_enable(priv); - dev->flags |= IFF_ECHO; /* we support local echo */ dev->netdev_ops = &c_can_netdev_ops; err = register_candev(dev); - if (err) - c_can_pm_runtime_disable(priv); - else + if (!err) devm_can_led_init(dev); - return err; } EXPORT_SYMBOL_GPL(register_c_can_dev); void unregister_c_can_dev(struct net_device *dev) { - struct c_can_priv *priv = netdev_priv(dev); - unregister_candev(dev); - - c_can_pm_runtime_disable(priv); } EXPORT_SYMBOL_GPL(unregister_c_can_dev); diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c index 05f425ceb53a..47b251b1607c 100644 --- a/drivers/net/can/c_can/c_can_platform.c +++ b/drivers/net/can/c_can/c_can_platform.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include #include @@ -386,6 +387,7 @@ static int c_can_plat_probe(struct platform_device *pdev) platform_set_drvdata(pdev, dev); SET_NETDEV_DEV(dev, &pdev->dev); + pm_runtime_enable(priv->device); ret = register_c_can_dev(dev); if (ret) { dev_err(&pdev->dev, "registering %s failed (err=%d)\n", @@ -398,6 +400,7 @@ static int c_can_plat_probe(struct platform_device *pdev) return 0; exit_free_device: + pm_runtime_disable(priv->device); free_c_can_dev(dev); exit: dev_err(&pdev->dev, "probe failed\n"); @@ -408,9 +411,10 @@ exit: static int c_can_plat_remove(struct platform_device *pdev) { struct net_device *dev = platform_get_drvdata(pdev); + struct c_can_priv *priv = netdev_priv(dev); unregister_c_can_dev(dev); - + pm_runtime_disable(priv->device); free_c_can_dev(dev); return 0; -- cgit v1.2.3 From c0e399f3baf42279f48991554240af8c457535d1 Mon Sep 17 00:00:00 2001 From: Torin Cooper-Bennun Date: Wed, 3 Mar 2021 10:31:52 +0000 Subject: can: m_can: m_can_do_rx_poll(): fix extraneous msg loss warning Message loss from RX FIFO 0 is already handled in m_can_handle_lost_msg(), with netdev output included. Removing this warning also improves driver performance under heavy load, where m_can_do_rx_poll() may be called many times before this interrupt is cleared, causing this message to be output many times (thanks Mariusz Madej for this report). Fixes: e0d1f4816f2a ("can: m_can: add Bosch M_CAN controller support") Link: https://lore.kernel.org/r/20210303103151.3760532-1-torin@maxiluxsystems.com Reported-by: Mariusz Madej Signed-off-by: Torin Cooper-Bennun Signed-off-by: Marc Kleine-Budde --- drivers/net/can/m_can/m_can.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c index 3752520a7d4b..d783c46cac16 100644 --- a/drivers/net/can/m_can/m_can.c +++ b/drivers/net/can/m_can/m_can.c @@ -501,9 +501,6 @@ static int m_can_do_rx_poll(struct net_device *dev, int quota) } while ((rxfs & RXFS_FFL_MASK) && (quota > 0)) { - if (rxfs & RXFS_RFL) - netdev_warn(dev, "Rx FIFO 0 Message Lost\n"); - m_can_read_fifo(dev, rxfs); quota--; -- cgit v1.2.3 From e98d9ee64ee2cc9b1d1a8e26610ec4d0392ebe50 Mon Sep 17 00:00:00 2001 From: Torin Cooper-Bennun Date: Wed, 3 Mar 2021 14:43:51 +0000 Subject: can: m_can: m_can_rx_peripheral(): fix RX being blocked by errors For M_CAN peripherals, m_can_rx_handler() was called with quota = 1, which caused any error handling to block RX from taking place until the next time the IRQ handler is called. This had been observed to cause RX to be blocked indefinitely in some cases. This is fixed by calling m_can_rx_handler with a sensibly high quota. Fixes: f524f829b75a ("can: m_can: Create a m_can platform framework") Link: https://lore.kernel.org/r/20210303144350.4093750-1-torin@maxiluxsystems.com Suggested-by: Marc Kleine-Budde Signed-off-by: Torin Cooper-Bennun Signed-off-by: Marc Kleine-Budde --- drivers/net/can/m_can/m_can.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c index d783c46cac16..0c8d36bc668c 100644 --- a/drivers/net/can/m_can/m_can.c +++ b/drivers/net/can/m_can/m_can.c @@ -873,7 +873,7 @@ static int m_can_rx_peripheral(struct net_device *dev) { struct m_can_classdev *cdev = netdev_priv(dev); - m_can_rx_handler(dev, 1); + m_can_rx_handler(dev, M_CAN_NAPI_WEIGHT); m_can_enable_all_interrupts(cdev); -- cgit v1.2.3 From 1cbd44666216278bbb6a55bcb6b9283702171c77 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sun, 7 Mar 2021 06:06:28 +0200 Subject: dmaengine: xilinx: dpdma: Fix descriptor issuing on video group When multiple channels are part of a video group, the transfer is triggered only when all channels in the group are ready. The logic to do so is incorrect, as it causes the descriptors for all channels but the last one in a group to not being pushed to the hardware. Fix it. Signed-off-by: Laurent Pinchart Link: https://lore.kernel.org/r/20210307040629.29308-2-laurent.pinchart@ideasonboard.com Signed-off-by: Vinod Koul --- drivers/dma/xilinx/xilinx_dpdma.c | 28 +++++++++++++++++----------- 1 file changed, 17 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/xilinx/xilinx_dpdma.c b/drivers/dma/xilinx/xilinx_dpdma.c index 55df63dead8d..d504112c609e 100644 --- a/drivers/dma/xilinx/xilinx_dpdma.c +++ b/drivers/dma/xilinx/xilinx_dpdma.c @@ -839,6 +839,7 @@ static void xilinx_dpdma_chan_queue_transfer(struct xilinx_dpdma_chan *chan) struct xilinx_dpdma_tx_desc *desc; struct virt_dma_desc *vdesc; u32 reg, channels; + bool first_frame; lockdep_assert_held(&chan->lock); @@ -852,14 +853,6 @@ static void xilinx_dpdma_chan_queue_transfer(struct xilinx_dpdma_chan *chan) chan->running = true; } - if (chan->video_group) - channels = xilinx_dpdma_chan_video_group_ready(chan); - else - channels = BIT(chan->id); - - if (!channels) - return; - vdesc = vchan_next_desc(&chan->vchan); if (!vdesc) return; @@ -884,13 +877,26 @@ static void xilinx_dpdma_chan_queue_transfer(struct xilinx_dpdma_chan *chan) FIELD_PREP(XILINX_DPDMA_CH_DESC_START_ADDRE_MASK, upper_32_bits(sw_desc->dma_addr))); - if (chan->first_frame) + first_frame = chan->first_frame; + chan->first_frame = false; + + if (chan->video_group) { + channels = xilinx_dpdma_chan_video_group_ready(chan); + /* + * Trigger the transfer only when all channels in the group are + * ready. + */ + if (!channels) + return; + } else { + channels = BIT(chan->id); + } + + if (first_frame) reg = XILINX_DPDMA_GBL_TRIG_MASK(channels); else reg = XILINX_DPDMA_GBL_RETRIG_MASK(channels); - chan->first_frame = false; - dpdma_write(xdev->reg, XILINX_DPDMA_GBL, reg); } -- cgit v1.2.3 From 868833fbffbe51c487df4f95d4de9194264a4b30 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sun, 7 Mar 2021 06:06:29 +0200 Subject: dmaengine: xilinx: dpdma: Fix race condition in done IRQ The active descriptor pointer is accessed from different contexts, including different interrupt handlers, and its access must be protected by the channel's lock. This wasn't done in the done IRQ handler. Fix it. Signed-off-by: Laurent Pinchart Link: https://lore.kernel.org/r/20210307040629.29308-3-laurent.pinchart@ideasonboard.com Signed-off-by: Vinod Koul --- drivers/dma/xilinx/xilinx_dpdma.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/dma/xilinx/xilinx_dpdma.c b/drivers/dma/xilinx/xilinx_dpdma.c index d504112c609e..70b29bd079c9 100644 --- a/drivers/dma/xilinx/xilinx_dpdma.c +++ b/drivers/dma/xilinx/xilinx_dpdma.c @@ -1048,13 +1048,14 @@ static int xilinx_dpdma_chan_stop(struct xilinx_dpdma_chan *chan) */ static void xilinx_dpdma_chan_done_irq(struct xilinx_dpdma_chan *chan) { - struct xilinx_dpdma_tx_desc *active = chan->desc.active; + struct xilinx_dpdma_tx_desc *active; unsigned long flags; spin_lock_irqsave(&chan->lock, flags); xilinx_dpdma_debugfs_desc_done_irq(chan); + active = chan->desc.active; if (active) vchan_cyclic_callback(&active->vdesc); else -- cgit v1.2.3 From 276559d8d02c2709281578976ca2f53bc62063d4 Mon Sep 17 00:00:00 2001 From: Ping Cheng Date: Thu, 11 Mar 2021 11:30:09 -0800 Subject: HID: wacom: set EV_KEY and EV_ABS only for non-HID_GENERIC type of devices Valid HID_GENERIC type of devices set EV_KEY and EV_ABS by wacom_map_usage. When *_input_capabilities are reached, those devices should already have their proper EV_* set. EV_KEY and EV_ABS only need to be set for non-HID_GENERIC type of devices in *_input_capabilities. Devices that don't support HID descitoprs will pass back to hid-input for registration without being accidentally rejected by the introduction of patch: "Input: refuse to register absolute devices without absinfo" Fixes: 6ecfe51b4082 ("Input: refuse to register absolute devices without absinfo") Signed-off-by: Ping Cheng Reviewed-by: Jason Gerecke Tested-by: Juan Garrido CC: stable@vger.kernel.org Signed-off-by: Jiri Kosina --- drivers/hid/wacom_wac.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c index bdd9ba577150..2d70dc4bea65 100644 --- a/drivers/hid/wacom_wac.c +++ b/drivers/hid/wacom_wac.c @@ -3574,8 +3574,6 @@ int wacom_setup_pen_input_capabilities(struct input_dev *input_dev, { struct wacom_features *features = &wacom_wac->features; - input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); - if (!(features->device_type & WACOM_DEVICETYPE_PEN)) return -ENODEV; @@ -3590,6 +3588,7 @@ int wacom_setup_pen_input_capabilities(struct input_dev *input_dev, return 0; } + input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); __set_bit(BTN_TOUCH, input_dev->keybit); __set_bit(ABS_MISC, input_dev->absbit); @@ -3742,8 +3741,6 @@ int wacom_setup_touch_input_capabilities(struct input_dev *input_dev, { struct wacom_features *features = &wacom_wac->features; - input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); - if (!(features->device_type & WACOM_DEVICETYPE_TOUCH)) return -ENODEV; @@ -3756,6 +3753,7 @@ int wacom_setup_touch_input_capabilities(struct input_dev *input_dev, /* setup has already been done */ return 0; + input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); __set_bit(BTN_TOUCH, input_dev->keybit); if (features->touch_max == 1) { -- cgit v1.2.3 From 701454bce906241ba7f50e2773881560d6404d29 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 16 Feb 2021 19:27:14 +0100 Subject: auxdisplay: Remove in_interrupt() usage. charlcd_write() is invoked as a VFS->write() callback and as such it is always invoked from preemptible context and may sleep. charlcd_puts() is invoked from register/unregister callback which is preemptible. The reboot notifier callback is also invoked from preemptible context. Therefore there is no need to use in_interrupt() to figure out if it is safe to sleep because it always is. in_interrupt() and related context checks are being removed from non-core code. Using schedule() to schedule (and be friendly to others) is discouraged and cond_resched() should be used instead. Remove in_interrupt() and use cond_resched() to schedule every 32 iterations if needed. Link: https://lkml.kernel.org/r/20200914204209.256266093@linutronix.de Signed-off-by: Sebastian Andrzej Siewior [mo: fixed a couple typos in comment and commit message] Signed-off-by: Miguel Ojeda --- drivers/auxdisplay/charlcd.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/auxdisplay/charlcd.c b/drivers/auxdisplay/charlcd.c index f43430e9dcee..24fd6f369ebe 100644 --- a/drivers/auxdisplay/charlcd.c +++ b/drivers/auxdisplay/charlcd.c @@ -470,12 +470,14 @@ static ssize_t charlcd_write(struct file *file, const char __user *buf, char c; for (; count-- > 0; (*ppos)++, tmp++) { - if (!in_interrupt() && (((count + 1) & 0x1f) == 0)) + if (((count + 1) & 0x1f) == 0) { /* - * let's be a little nice with other processes - * that need some CPU + * charlcd_write() is invoked as a VFS->write() callback + * and as such it is always invoked from preemptible + * context and may sleep. */ - schedule(); + cond_resched(); + } if (get_user(c, tmp)) return -EFAULT; @@ -537,12 +539,8 @@ static void charlcd_puts(struct charlcd *lcd, const char *s) int count = strlen(s); for (; count-- > 0; tmp++) { - if (!in_interrupt() && (((count + 1) & 0x1f) == 0)) - /* - * let's be a little nice with other processes - * that need some CPU - */ - schedule(); + if (((count + 1) & 0x1f) == 0) + cond_resched(); charlcd_write_char(lcd, *tmp); } -- cgit v1.2.3 From a3bc483216650a7232559bf0a1debfbabff3e12c Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 16 Mar 2021 15:03:41 +0100 Subject: net: broadcom: BCM4908_ENET should not default to y, unconditionally MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Merely enabling compile-testing should not enable additional code. To fix this, restrict the automatic enabling of BCM4908_ENET to ARCH_BCM4908. Fixes: 4feffeadbcb2e5b1 ("net: broadcom: bcm4908enet: add BCM4908 controller driver") Signed-off-by: Geert Uytterhoeven Acked-by: Florian Fainelli Acked-by: Rafał Miłecki Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig index f8a168b73307..cb88ffb8f12f 100644 --- a/drivers/net/ethernet/broadcom/Kconfig +++ b/drivers/net/ethernet/broadcom/Kconfig @@ -54,7 +54,7 @@ config B44_PCI config BCM4908_ENET tristate "Broadcom BCM4908 internal mac support" depends on ARCH_BCM4908 || COMPILE_TEST - default y + default y if ARCH_BCM4908 help This driver supports Ethernet controller integrated into Broadcom BCM4908 family SoCs. -- cgit v1.2.3 From 982e5ee23d764fe6158f67a7813d416335e978b0 Mon Sep 17 00:00:00 2001 From: Louis Peens Date: Tue, 16 Mar 2021 19:13:08 +0100 Subject: nfp: flower: fix unsupported pre_tunnel flows There are some pre_tunnel flows combinations which are incorrectly being offloaded without proper support, fix these. - Matching on MPLS is not supported for pre_tun. - Match on IPv4/IPv6 layer must be present. - Destination MAC address must match pre_tun.dev MAC Fixes: 120ffd84a9ec ("nfp: flower: verify pre-tunnel rules") Signed-off-by: Louis Peens Signed-off-by: Simon Horman Signed-off-by: David S. Miller --- drivers/net/ethernet/netronome/nfp/flower/offload.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/netronome/nfp/flower/offload.c b/drivers/net/ethernet/netronome/nfp/flower/offload.c index 1c59aff2163c..d72225d64a75 100644 --- a/drivers/net/ethernet/netronome/nfp/flower/offload.c +++ b/drivers/net/ethernet/netronome/nfp/flower/offload.c @@ -1142,6 +1142,12 @@ nfp_flower_validate_pre_tun_rule(struct nfp_app *app, return -EOPNOTSUPP; } + if (!(key_layer & NFP_FLOWER_LAYER_IPV4) && + !(key_layer & NFP_FLOWER_LAYER_IPV6)) { + NL_SET_ERR_MSG_MOD(extack, "unsupported pre-tunnel rule: match on ipv4/ipv6 eth_type must be present"); + return -EOPNOTSUPP; + } + /* Skip fields known to exist. */ mask += sizeof(struct nfp_flower_meta_tci); ext += sizeof(struct nfp_flower_meta_tci); @@ -1152,6 +1158,13 @@ nfp_flower_validate_pre_tun_rule(struct nfp_app *app, mask += sizeof(struct nfp_flower_in_port); ext += sizeof(struct nfp_flower_in_port); + /* Ensure destination MAC address matches pre_tun_dev. */ + mac = (struct nfp_flower_mac_mpls *)ext; + if (memcmp(&mac->mac_dst[0], flow->pre_tun_rule.dev->dev_addr, 6)) { + NL_SET_ERR_MSG_MOD(extack, "unsupported pre-tunnel rule: dest MAC must match output dev MAC"); + return -EOPNOTSUPP; + } + /* Ensure destination MAC address is fully matched. */ mac = (struct nfp_flower_mac_mpls *)mask; if (!is_broadcast_ether_addr(&mac->mac_dst[0])) { @@ -1159,6 +1172,11 @@ nfp_flower_validate_pre_tun_rule(struct nfp_app *app, return -EOPNOTSUPP; } + if (mac->mpls_lse) { + NL_SET_ERR_MSG_MOD(extack, "unsupported pre-tunnel rule: MPLS not supported"); + return -EOPNOTSUPP; + } + mask += sizeof(struct nfp_flower_mac_mpls); ext += sizeof(struct nfp_flower_mac_mpls); if (key_layer & NFP_FLOWER_LAYER_IPV4 || -- cgit v1.2.3 From 5c4f5e19d6a8e159127b9d653bb67e0dc7a28047 Mon Sep 17 00:00:00 2001 From: Louis Peens Date: Tue, 16 Mar 2021 19:13:09 +0100 Subject: nfp: flower: add ipv6 bit to pre_tunnel control message Differentiate between ipv4 and ipv6 flows when configuring the pre_tunnel table to prevent them trampling each other in the table. Fixes: 783461604f7e ("nfp: flower: update flow merge code to support IPv6 tunnels") Signed-off-by: Louis Peens Signed-off-by: Simon Horman Signed-off-by: David S. Miller --- drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c b/drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c index 7248d248f604..d19c02e99114 100644 --- a/drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c +++ b/drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c @@ -16,8 +16,9 @@ #define NFP_FL_MAX_ROUTES 32 #define NFP_TUN_PRE_TUN_RULE_LIMIT 32 -#define NFP_TUN_PRE_TUN_RULE_DEL 0x1 -#define NFP_TUN_PRE_TUN_IDX_BIT 0x8 +#define NFP_TUN_PRE_TUN_RULE_DEL BIT(0) +#define NFP_TUN_PRE_TUN_IDX_BIT BIT(3) +#define NFP_TUN_PRE_TUN_IPV6_BIT BIT(7) /** * struct nfp_tun_pre_run_rule - rule matched before decap @@ -1268,6 +1269,7 @@ int nfp_flower_xmit_pre_tun_flow(struct nfp_app *app, { struct nfp_flower_priv *app_priv = app->priv; struct nfp_tun_offloaded_mac *mac_entry; + struct nfp_flower_meta_tci *key_meta; struct nfp_tun_pre_tun_rule payload; struct net_device *internal_dev; int err; @@ -1290,6 +1292,15 @@ int nfp_flower_xmit_pre_tun_flow(struct nfp_app *app, if (!mac_entry) return -ENOENT; + /* Set/clear IPV6 bit. cpu_to_be16() swap will lead to MSB being + * set/clear for port_idx. + */ + key_meta = (struct nfp_flower_meta_tci *)flow->unmasked_data; + if (key_meta->nfp_flow_key_layer & NFP_FLOWER_LAYER_IPV6) + mac_entry->index |= NFP_TUN_PRE_TUN_IPV6_BIT; + else + mac_entry->index &= ~NFP_TUN_PRE_TUN_IPV6_BIT; + payload.port_idx = cpu_to_be16(mac_entry->index); /* Copy mac id and vlan to flow - dev may not exist at delete time. */ -- cgit v1.2.3 From d8ce0275e45ec809a33f98fc080fe7921b720dfb Mon Sep 17 00:00:00 2001 From: Louis Peens Date: Tue, 16 Mar 2021 19:13:10 +0100 Subject: nfp: flower: fix pre_tun mask id allocation pre_tun_rule flows does not follow the usual add-flow path, instead they are used to update the pre_tun table on the firmware. This means that if the mask-id gets allocated here the firmware will never see the "NFP_FL_META_FLAG_MANAGE_MASK" flag for the specific mask id, which triggers the allocation on the firmware side. This leads to the firmware mask being corrupted and causing all sorts of strange behaviour. Fixes: f12725d98cbe ("nfp: flower: offload pre-tunnel rules") Signed-off-by: Louis Peens Signed-off-by: Simon Horman Signed-off-by: David S. Miller --- .../net/ethernet/netronome/nfp/flower/metadata.c | 24 +++++++++++++++------- 1 file changed, 17 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/netronome/nfp/flower/metadata.c b/drivers/net/ethernet/netronome/nfp/flower/metadata.c index 5defd31d481c..aa06fcb38f8b 100644 --- a/drivers/net/ethernet/netronome/nfp/flower/metadata.c +++ b/drivers/net/ethernet/netronome/nfp/flower/metadata.c @@ -327,8 +327,14 @@ int nfp_compile_flow_metadata(struct nfp_app *app, goto err_free_ctx_entry; } + /* Do net allocate a mask-id for pre_tun_rules. These flows are used to + * configure the pre_tun table and are never actually send to the + * firmware as an add-flow message. This causes the mask-id allocation + * on the firmware to get out of sync if allocated here. + */ new_mask_id = 0; - if (!nfp_check_mask_add(app, nfp_flow->mask_data, + if (!nfp_flow->pre_tun_rule.dev && + !nfp_check_mask_add(app, nfp_flow->mask_data, nfp_flow->meta.mask_len, &nfp_flow->meta.flags, &new_mask_id)) { NL_SET_ERR_MSG_MOD(extack, "invalid entry: cannot allocate a new mask id"); @@ -359,7 +365,8 @@ int nfp_compile_flow_metadata(struct nfp_app *app, goto err_remove_mask; } - if (!nfp_check_mask_remove(app, nfp_flow->mask_data, + if (!nfp_flow->pre_tun_rule.dev && + !nfp_check_mask_remove(app, nfp_flow->mask_data, nfp_flow->meta.mask_len, NULL, &new_mask_id)) { NL_SET_ERR_MSG_MOD(extack, "invalid entry: cannot release mask id"); @@ -374,8 +381,10 @@ int nfp_compile_flow_metadata(struct nfp_app *app, return 0; err_remove_mask: - nfp_check_mask_remove(app, nfp_flow->mask_data, nfp_flow->meta.mask_len, - NULL, &new_mask_id); + if (!nfp_flow->pre_tun_rule.dev) + nfp_check_mask_remove(app, nfp_flow->mask_data, + nfp_flow->meta.mask_len, + NULL, &new_mask_id); err_remove_rhash: WARN_ON_ONCE(rhashtable_remove_fast(&priv->stats_ctx_table, &ctx_entry->ht_node, @@ -406,9 +415,10 @@ int nfp_modify_flow_metadata(struct nfp_app *app, __nfp_modify_flow_metadata(priv, nfp_flow); - nfp_check_mask_remove(app, nfp_flow->mask_data, - nfp_flow->meta.mask_len, &nfp_flow->meta.flags, - &new_mask_id); + if (!nfp_flow->pre_tun_rule.dev) + nfp_check_mask_remove(app, nfp_flow->mask_data, + nfp_flow->meta.mask_len, &nfp_flow->meta.flags, + &new_mask_id); /* Update flow payload with mask ids. */ nfp_flow->unmasked_data[NFP_FL_MASK_ID_LOCATION] = new_mask_id; -- cgit v1.2.3 From 3b24cdfc721a5f1098da22f9f68ff5f4a5efccc9 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Thu, 25 Feb 2021 01:47:51 +0300 Subject: drm/msm/dsi: fix check-before-set in the 7nm dsi_pll code Fix setting min/max DSI PLL rate for the V4.1 7nm DSI PLL (used on sm8250). Current code checks for pll->type before it is set (as it is set in the msm_dsi_pll_init() after calling device-specific functions. Cc: Jonathan Marek Fixes: 1ef7c99d145c ("drm/msm/dsi: add support for 7nm DSI PHY/PLL") Signed-off-by: Dmitry Baryshkov Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/dsi/pll/dsi_pll.c | 2 +- drivers/gpu/drm/msm/dsi/pll/dsi_pll.h | 6 ++++-- drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c | 5 +++-- 3 files changed, 8 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll.c index a45fe95aff49..3dc65877fa10 100644 --- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll.c +++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll.c @@ -163,7 +163,7 @@ struct msm_dsi_pll *msm_dsi_pll_init(struct platform_device *pdev, break; case MSM_DSI_PHY_7NM: case MSM_DSI_PHY_7NM_V4_1: - pll = msm_dsi_pll_7nm_init(pdev, id); + pll = msm_dsi_pll_7nm_init(pdev, type, id); break; default: pll = ERR_PTR(-ENXIO); diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll.h b/drivers/gpu/drm/msm/dsi/pll/dsi_pll.h index 3405982a092c..bbecb1de5678 100644 --- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll.h +++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll.h @@ -117,10 +117,12 @@ msm_dsi_pll_10nm_init(struct platform_device *pdev, int id) } #endif #ifdef CONFIG_DRM_MSM_DSI_7NM_PHY -struct msm_dsi_pll *msm_dsi_pll_7nm_init(struct platform_device *pdev, int id); +struct msm_dsi_pll *msm_dsi_pll_7nm_init(struct platform_device *pdev, + enum msm_dsi_phy_type type, int id); #else static inline struct msm_dsi_pll * -msm_dsi_pll_7nm_init(struct platform_device *pdev, int id) +msm_dsi_pll_7nm_init(struct platform_device *pdev, + enum msm_dsi_phy_type type, int id) { return ERR_PTR(-ENODEV); } diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c index 93bf142e4a4e..c1f6708367ae 100644 --- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c +++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c @@ -852,7 +852,8 @@ err_base_clk_hw: return ret; } -struct msm_dsi_pll *msm_dsi_pll_7nm_init(struct platform_device *pdev, int id) +struct msm_dsi_pll *msm_dsi_pll_7nm_init(struct platform_device *pdev, + enum msm_dsi_phy_type type, int id) { struct dsi_pll_7nm *pll_7nm; struct msm_dsi_pll *pll; @@ -885,7 +886,7 @@ struct msm_dsi_pll *msm_dsi_pll_7nm_init(struct platform_device *pdev, int id) pll = &pll_7nm->base; pll->min_rate = 1000000000UL; pll->max_rate = 3500000000UL; - if (pll->type == MSM_DSI_PHY_7NM_V4_1) { + if (type == MSM_DSI_PHY_7NM_V4_1) { pll->min_rate = 600000000UL; pll->max_rate = (unsigned long)5000000000ULL; /* workaround for max rate overflowing on 32-bit builds: */ -- cgit v1.2.3 From 19f4a055abf2a69a1c0109456c3758b5697730c9 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Thu, 25 Feb 2021 02:01:43 +0300 Subject: drm/msm/dsi_pll_7nm: Solve TODO for multiplier frac_bits assignment The number of fractional registers bits is known and already set in the frac_bits variable of the dsi_pll_config struct here in 7nm: remove the TODO by simply using that variable. This is a copy of 196145eb1af1 ("drm/msm/dsi_pll_10nm: Solve TODO for multiplier frac_bits assignment"). Signed-off-by: Dmitry Baryshkov Reviewed-by: Abhinav Kumar Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c index c1f6708367ae..0458eda15114 100644 --- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c +++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c @@ -509,6 +509,7 @@ static unsigned long dsi_pll_7nm_vco_recalc_rate(struct clk_hw *hw, { struct msm_dsi_pll *pll = hw_clk_to_pll(hw); struct dsi_pll_7nm *pll_7nm = to_pll_7nm(pll); + struct dsi_pll_config *config = &pll_7nm->pll_configuration; void __iomem *base = pll_7nm->mmio; u64 ref_clk = pll_7nm->vco_ref_clk_rate; u64 vco_rate = 0x0; @@ -529,9 +530,8 @@ static unsigned long dsi_pll_7nm_vco_recalc_rate(struct clk_hw *hw, /* * TODO: * 1. Assumes prescaler is disabled - * 2. Multiplier is 2^18. it should be 2^(num_of_frac_bits) */ - multiplier = 1 << 18; + multiplier = 1 << config->frac_bits; pll_freq = dec * (ref_clk * 2); tmp64 = (ref_clk * 2 * frac); pll_freq += div_u64(tmp64, multiplier); -- cgit v1.2.3 From 9daaf31307856defb1070685418ce5a484ecda3a Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Thu, 25 Feb 2021 02:05:28 +0300 Subject: drm/msm/dsi_pll_7nm: Fix variable usage for pll_lockdet_rate The PLL_LOCKDET_RATE_1 was being programmed with a hardcoded value directly, but the same value was also being specified in the dsi_pll_regs struct pll_lockdet_rate variable: let's use it! Based on 362cadf34b9f ("drm/msm/dsi_pll_10nm: Fix variable usage for pll_lockdet_rate") Signed-off-by: Dmitry Baryshkov Reviewed-by: Abhinav Kumar Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c index 0458eda15114..e29b3bfd63d1 100644 --- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c +++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c @@ -325,7 +325,7 @@ static void dsi_pll_commit(struct dsi_pll_7nm *pll) pll_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_LOW_1, reg->frac_div_start_low); pll_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_MID_1, reg->frac_div_start_mid); pll_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_HIGH_1, reg->frac_div_start_high); - pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCKDET_RATE_1, 0x40); + pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCKDET_RATE_1, reg->pll_lockdet_rate); pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCK_DELAY, 0x06); pll_write(base + REG_DSI_7nm_PHY_PLL_CMODE_1, 0x10); /* TODO: 0x00 for CPHY */ pll_write(base + REG_DSI_7nm_PHY_PLL_CLOCK_INVERTERS, reg->pll_clock_inverters); -- cgit v1.2.3 From 413b7a320e238d1a79dfca24c35ce4e1a0e7a8d6 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Fri, 26 Feb 2021 13:08:21 -0800 Subject: drm/msm/dp: Restore aux retry tuning logic In commit 9fc418430c65 ("drm/msm/dp: unplug interrupt missed after irq_hpd handler") we dropped a reset of the aux phy during aux transfers because resetting the phy during active communication caused us to miss an hpd irq in some cases. Unfortunately, we also dropped the part of the code that changes the aux phy tuning when an aux transfer fails due to a timeout. That part of the code was calling into the phy driver to reconfigure the aux TX swing controls, working around poor channel quality. Let's restore this phy setting code so that aux channel communication is more reliable. Cc: Kuogee Hsieh Fixes: 9fc418430c65 ("drm/msm/dp: unplug interrupt missed after irq_hpd handler") Signed-off-by: Stephen Boyd Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/dp/dp_aux.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/dp/dp_aux.c b/drivers/gpu/drm/msm/dp/dp_aux.c index 1c6e1d2b947c..7c22bfe0fc7d 100644 --- a/drivers/gpu/drm/msm/dp/dp_aux.c +++ b/drivers/gpu/drm/msm/dp/dp_aux.c @@ -32,6 +32,8 @@ struct dp_aux_private { struct drm_dp_aux dp_aux; }; +#define MAX_AUX_RETRIES 5 + static const char *dp_aux_get_error(u32 aux_error) { switch (aux_error) { @@ -377,6 +379,11 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux *dp_aux, ret = dp_aux_cmd_fifo_tx(aux, msg); if (ret < 0) { + if (aux->native) { + aux->retry_cnt++; + if (!(aux->retry_cnt % MAX_AUX_RETRIES)) + dp_catalog_aux_update_cfg(aux->catalog); + } usleep_range(400, 500); /* at least 400us to next try */ goto unlock_exit; } -- cgit v1.2.3 From 4a9d36b0610aa7034340e976652e5b43320dd7c5 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Sun, 28 Feb 2021 13:36:51 +0100 Subject: drm/msm/adreno: a5xx_power: Don't apply A540 lm_setup to other GPUs While passing the A530-specific lm_setup func to A530 and A540 to !A530 was fine back when only these two were supported, it certainly is not a good idea to send A540 specifics to smaller GPUs like A508 and friends. Signed-off-by: Konrad Dybcio Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/adreno/a5xx_power.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/adreno/a5xx_power.c b/drivers/gpu/drm/msm/adreno/a5xx_power.c index 5ccc9da455a1..c35b06b46fcc 100644 --- a/drivers/gpu/drm/msm/adreno/a5xx_power.c +++ b/drivers/gpu/drm/msm/adreno/a5xx_power.c @@ -304,7 +304,7 @@ int a5xx_power_init(struct msm_gpu *gpu) /* Set up the limits management */ if (adreno_is_a530(adreno_gpu)) a530_lm_setup(gpu); - else + else if (adreno_is_a540(adreno_gpu)) a540_lm_setup(gpu); /* Set up SP/TP power collpase */ -- cgit v1.2.3 From d2c21422323b06938b3c070361dc544f047489d7 Mon Sep 17 00:00:00 2001 From: Shannon Nelson Date: Tue, 16 Mar 2021 17:07:47 -0700 Subject: ionic: linearize tso skb with too many frags We were linearizing non-TSO skbs that had too many frags, but we weren't checking number of frags on TSO skbs. This could lead to a bad page reference when we received a TSO skb with more frags than the Tx descriptor could support. v2: use gso_segs rather than yet another division don't rework the check on the nr_frags Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling") Signed-off-by: Shannon Nelson Signed-off-by: David S. Miller --- drivers/net/ethernet/pensando/ionic/ionic_txrx.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/pensando/ionic/ionic_txrx.c b/drivers/net/ethernet/pensando/ionic/ionic_txrx.c index 162a1ff1e9d2..4087311f7082 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_txrx.c +++ b/drivers/net/ethernet/pensando/ionic/ionic_txrx.c @@ -1079,15 +1079,17 @@ static int ionic_tx_descs_needed(struct ionic_queue *q, struct sk_buff *skb) { int sg_elems = q->lif->qtype_info[IONIC_QTYPE_TXQ].max_sg_elems; struct ionic_tx_stats *stats = q_to_tx_stats(q); + int ndescs; int err; - /* If TSO, need roundup(skb->len/mss) descs */ + /* Each desc is mss long max, so a descriptor for each gso_seg */ if (skb_is_gso(skb)) - return (skb->len / skb_shinfo(skb)->gso_size) + 1; + ndescs = skb_shinfo(skb)->gso_segs; + else + ndescs = 1; - /* If non-TSO, just need 1 desc and nr_frags sg elems */ if (skb_shinfo(skb)->nr_frags <= sg_elems) - return 1; + return ndescs; /* Too many frags, so linearize */ err = skb_linearize(skb); @@ -1096,8 +1098,7 @@ static int ionic_tx_descs_needed(struct ionic_queue *q, struct sk_buff *skb) stats->linearize++; - /* Need 1 desc and zero sg elems */ - return 1; + return ndescs; } static int ionic_maybe_stop_tx(struct ionic_queue *q, int ndescs) -- cgit v1.2.3 From 9afeefcf06fc7b4bdab06a6e2cb06745bded34dd Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Mon, 15 Mar 2021 15:58:59 -0500 Subject: remoteproc: pru: Fix firmware loading crashes on K3 SoCs The K3 PRUs are 32-bit processors and in general have some limitations in using the standard ARMv8 memcpy function for loading firmware segments, so the driver already uses a custom memcpy implementation. This added logic however is limited to only IRAMs at the moment, but the loading into Data RAMs is not completely ok either and does generate a kernel crash for unaligned accesses. Fix these crashes by removing the existing IRAM logic limitation and extending the custom memcpy usage to Data RAMs as well for all K3 SoCs. Fixes: 1d39f4d19921 ("remoteproc: pru: Add support for various PRU cores on K3 AM65x SoCs") Signed-off-by: Suman Anna Link: https://lore.kernel.org/r/20210315205859.19590-1-s-anna@ti.com Signed-off-by: Bjorn Andersson --- drivers/remoteproc/pru_rproc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/remoteproc/pru_rproc.c b/drivers/remoteproc/pru_rproc.c index 5fad787ba012..dcb380e868df 100644 --- a/drivers/remoteproc/pru_rproc.c +++ b/drivers/remoteproc/pru_rproc.c @@ -603,7 +603,7 @@ pru_rproc_load_elf_segments(struct rproc *rproc, const struct firmware *fw) break; } - if (pru->data->is_k3 && is_iram) { + if (pru->data->is_k3) { ret = pru_rproc_memcpy(ptr, elf_data + phdr->p_offset, filesz); if (ret) { -- cgit v1.2.3 From 7ad48d27a2846bfda29214fb454d001c3e02b9e7 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Wed, 17 Mar 2021 09:40:38 -0700 Subject: drm/msm: Ratelimit invalid-fence message We have seen a couple cases where low memory situations cause something bad to happen, followed by a flood of these messages obscuring the root cause. Lets ratelimit the dmesg spam so that next time it happens we don't lose the kernel traces leading up to this. Signed-off-by: Rob Clark Reviewed-by: Douglas Anderson --- drivers/gpu/drm/msm/msm_fence.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/msm_fence.c b/drivers/gpu/drm/msm/msm_fence.c index ad2703698b05..cd59a5918038 100644 --- a/drivers/gpu/drm/msm/msm_fence.c +++ b/drivers/gpu/drm/msm/msm_fence.c @@ -45,7 +45,7 @@ int msm_wait_fence(struct msm_fence_context *fctx, uint32_t fence, int ret; if (fence > fctx->last_fence) { - DRM_ERROR("%s: waiting on invalid fence: %u (of %u)\n", + DRM_ERROR_RATELIMITED("%s: waiting on invalid fence: %u (of %u)\n", fctx->name, fence, fctx->last_fence); return -EINVAL; } -- cgit v1.2.3 From e409a6a3e0690efdef9b8a96197bc61ff117cfaf Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 15 Mar 2021 12:50:08 +0100 Subject: i2c: turn recovery error on init to debug In some configurations, recovery is optional. So, don't throw an error when it is not used because e.g. pinctrl settings for recovery are not provided. Reword the message and make it debug output. Reported-by: Klaus Kudielka Tested-by: Klaus Kudielka Signed-off-by: Wolfram Sang Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/i2c-core-base.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c index 63ebf722a424..f21362355973 100644 --- a/drivers/i2c/i2c-core-base.c +++ b/drivers/i2c/i2c-core-base.c @@ -378,7 +378,7 @@ static int i2c_gpio_init_recovery(struct i2c_adapter *adap) static int i2c_init_recovery(struct i2c_adapter *adap) { struct i2c_bus_recovery_info *bri = adap->bus_recovery_info; - char *err_str; + char *err_str, *err_level = KERN_ERR; if (!bri) return 0; @@ -387,7 +387,8 @@ static int i2c_init_recovery(struct i2c_adapter *adap) return -EPROBE_DEFER; if (!bri->recover_bus) { - err_str = "no recover_bus() found"; + err_str = "no suitable method provided"; + err_level = KERN_DEBUG; goto err; } @@ -414,7 +415,7 @@ static int i2c_init_recovery(struct i2c_adapter *adap) return 0; err: - dev_err(&adap->dev, "Not using recovery: %s\n", err_str); + dev_printk(err_level, &adap->dev, "Not using recovery: %s\n", err_str); adap->bus_recovery_info = NULL; return -EINVAL; -- cgit v1.2.3 From 053191b6a4bc2d429e94e866e3b2bc611d5add31 Mon Sep 17 00:00:00 2001 From: Mark Pearson Date: Thu, 11 Mar 2021 12:48:43 -0500 Subject: platform/x86: thinkpad_acpi: check dytc version for lapmode sysfs Lenovo platforms with DYTC versions earlier than version 5 don't set the lapmode interface correctly, causing issues with thermald on older platforms. Add checking to only create the dytc_lapmode interface for version 5 and later. Fixes: 1ac09656bded ("platform/x86: thinkpad_acpi: Add palm sensor support") Signed-off-by: Mark Pearson Link: https://lore.kernel.org/r/20210311174843.3161-1-markpearson@lenovo.com Signed-off-by: Hans de Goede --- drivers/platform/x86/thinkpad_acpi.c | 91 +++++++++++++++++++++++++----------- 1 file changed, 65 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index b881044b31b0..f7de90a47e28 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -9845,6 +9845,11 @@ static struct ibm_struct lcdshadow_driver_data = { * Thinkpad sensor interfaces */ +#define DYTC_CMD_QUERY 0 /* To get DYTC status - enable/revision */ +#define DYTC_QUERY_ENABLE_BIT 8 /* Bit 8 - 0 = disabled, 1 = enabled */ +#define DYTC_QUERY_SUBREV_BIT 16 /* Bits 16 - 27 - sub revision */ +#define DYTC_QUERY_REV_BIT 28 /* Bits 28 - 31 - revision */ + #define DYTC_CMD_GET 2 /* To get current IC function and mode */ #define DYTC_GET_LAPMODE_BIT 17 /* Set when in lapmode */ @@ -9855,6 +9860,7 @@ static bool has_palmsensor; static bool has_lapsensor; static bool palm_state; static bool lap_state; +static int dytc_version; static int dytc_command(int command, int *output) { @@ -9869,6 +9875,33 @@ static int dytc_command(int command, int *output) return 0; } +static int dytc_get_version(void) +{ + int err, output; + + /* Check if we've been called before - and just return cached value */ + if (dytc_version) + return dytc_version; + + /* Otherwise query DYTC and extract version information */ + err = dytc_command(DYTC_CMD_QUERY, &output); + /* + * If support isn't available (ENODEV) then don't return an error + * and don't create the sysfs group + */ + if (err == -ENODEV) + return 0; + /* For all other errors we can flag the failure */ + if (err) + return err; + + /* Check DYTC is enabled and supports mode setting */ + if (output & BIT(DYTC_QUERY_ENABLE_BIT)) + dytc_version = (output >> DYTC_QUERY_REV_BIT) & 0xF; + + return 0; +} + static int lapsensor_get(bool *present, bool *state) { int output, err; @@ -9974,7 +10007,18 @@ static int tpacpi_proxsensor_init(struct ibm_init_struct *iibm) if (err) return err; } - if (has_lapsensor) { + + /* Check if we know the DYTC version, if we don't then get it */ + if (!dytc_version) { + err = dytc_get_version(); + if (err) + return err; + } + /* + * Platforms before DYTC version 5 claim to have a lap sensor, but it doesn't work, so we + * ignore them + */ + if (has_lapsensor && (dytc_version >= 5)) { err = sysfs_create_file(&tpacpi_pdev->dev.kobj, &dev_attr_dytc_lapmode.attr); if (err) return err; @@ -9999,14 +10043,9 @@ static struct ibm_struct proxsensor_driver_data = { * DYTC Platform Profile interface */ -#define DYTC_CMD_QUERY 0 /* To get DYTC status - enable/revision */ #define DYTC_CMD_SET 1 /* To enable/disable IC function mode */ #define DYTC_CMD_RESET 0x1ff /* To reset back to default */ -#define DYTC_QUERY_ENABLE_BIT 8 /* Bit 8 - 0 = disabled, 1 = enabled */ -#define DYTC_QUERY_SUBREV_BIT 16 /* Bits 16 - 27 - sub revision */ -#define DYTC_QUERY_REV_BIT 28 /* Bits 28 - 31 - revision */ - #define DYTC_GET_FUNCTION_BIT 8 /* Bits 8-11 - function setting */ #define DYTC_GET_MODE_BIT 12 /* Bits 12-15 - mode setting */ @@ -10211,28 +10250,28 @@ static int tpacpi_dytc_profile_init(struct ibm_init_struct *iibm) if (err) return err; + /* Check if we know the DYTC version, if we don't then get it */ + if (!dytc_version) { + err = dytc_get_version(); + if (err) + return err; + } /* Check DYTC is enabled and supports mode setting */ - if (output & BIT(DYTC_QUERY_ENABLE_BIT)) { - /* Only DYTC v5.0 and later has this feature. */ - int dytc_version; - - dytc_version = (output >> DYTC_QUERY_REV_BIT) & 0xF; - if (dytc_version >= 5) { - dbg_printk(TPACPI_DBG_INIT, - "DYTC version %d: thermal mode available\n", dytc_version); - /* Create platform_profile structure and register */ - err = platform_profile_register(&dytc_profile); - /* - * If for some reason platform_profiles aren't enabled - * don't quit terminally. - */ - if (err) - return 0; + if (dytc_version >= 5) { + dbg_printk(TPACPI_DBG_INIT, + "DYTC version %d: thermal mode available\n", dytc_version); + /* Create platform_profile structure and register */ + err = platform_profile_register(&dytc_profile); + /* + * If for some reason platform_profiles aren't enabled + * don't quit terminally. + */ + if (err) + return 0; - dytc_profile_available = true; - /* Ensure initial values are correct */ - dytc_profile_refresh(); - } + dytc_profile_available = true; + /* Ensure initial values are correct */ + dytc_profile_refresh(); } return 0; } -- cgit v1.2.3 From 804741ac7b9f2fdebe3740cb0579cb8d94d49e60 Mon Sep 17 00:00:00 2001 From: Mian Yousaf Kaukab Date: Thu, 18 Mar 2021 09:50:26 +0100 Subject: netsec: restore phy power state after controller reset Since commit 8e850f25b581 ("net: socionext: Stop PHY before resetting netsec") netsec_netdev_init() power downs phy before resetting the controller. However, the state is not restored once the reset is complete. As a result it is not possible to bring up network on a platform with Broadcom BCM5482 phy. Fix the issue by restoring phy power state after controller reset is complete. Fixes: 8e850f25b581 ("net: socionext: Stop PHY before resetting netsec") Cc: stable@vger.kernel.org Signed-off-by: Mian Yousaf Kaukab Signed-off-by: David S. Miller --- drivers/net/ethernet/socionext/netsec.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/socionext/netsec.c b/drivers/net/ethernet/socionext/netsec.c index 3c53051bdacf..200785e703c8 100644 --- a/drivers/net/ethernet/socionext/netsec.c +++ b/drivers/net/ethernet/socionext/netsec.c @@ -1715,14 +1715,17 @@ static int netsec_netdev_init(struct net_device *ndev) goto err1; /* set phy power down */ - data = netsec_phy_read(priv->mii_bus, priv->phy_addr, MII_BMCR) | - BMCR_PDOWN; - netsec_phy_write(priv->mii_bus, priv->phy_addr, MII_BMCR, data); + data = netsec_phy_read(priv->mii_bus, priv->phy_addr, MII_BMCR); + netsec_phy_write(priv->mii_bus, priv->phy_addr, MII_BMCR, + data | BMCR_PDOWN); ret = netsec_reset_hardware(priv, true); if (ret) goto err2; + /* Restore phy power state */ + netsec_phy_write(priv->mii_bus, priv->phy_addr, MII_BMCR, data); + spin_lock_init(&priv->desc_ring[NETSEC_RING_TX].lock); spin_lock_init(&priv->desc_ring[NETSEC_RING_RX].lock); -- cgit v1.2.3 From f41b2d67d767f34bcd29fab83efaddb7f1e54579 Mon Sep 17 00:00:00 2001 From: Subbaraya Sundeep Date: Thu, 18 Mar 2021 19:45:42 +0530 Subject: octeontx2-pf: Do not modify number of rules In the ETHTOOL_GRXCLSRLALL ioctl ethtool uses below structure to read number of rules from the driver. struct ethtool_rxnfc { __u32 cmd; __u32 flow_type; __u64 data; struct ethtool_rx_flow_spec fs; union { __u32 rule_cnt; __u32 rss_context; }; __u32 rule_locs[0]; }; Driver must not modify rule_cnt member. But currently driver modifies it by modifying rss_context. Hence fix it by using a local variable. Fixes: 81a4362016e7 ("octeontx2-pf: Add RSS multi group support") Signed-off-by: Subbaraya Sundeep Signed-off-by: Hariprasad Kelam Signed-off-by: Sunil Kovvuri Goutham Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c index 0dbbf38e0597..dc1778420978 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c @@ -257,17 +257,19 @@ int otx2_get_flow(struct otx2_nic *pfvf, struct ethtool_rxnfc *nfc, int otx2_get_all_flows(struct otx2_nic *pfvf, struct ethtool_rxnfc *nfc, u32 *rule_locs) { + u32 rule_cnt = nfc->rule_cnt; u32 location = 0; int idx = 0; int err = 0; nfc->data = pfvf->flow_cfg->ntuple_max_flows; - while ((!err || err == -ENOENT) && idx < nfc->rule_cnt) { + while ((!err || err == -ENOENT) && idx < rule_cnt) { err = otx2_get_flow(pfvf, nfc, location); if (!err) rule_locs[idx++] = location; location++; } + nfc->rule_cnt = rule_cnt; return err; } -- cgit v1.2.3 From f7884097141b615b6ce89c16f456a53902b4eec3 Mon Sep 17 00:00:00 2001 From: Rakesh Babu Date: Thu, 18 Mar 2021 19:45:43 +0530 Subject: octeontx2-af: Formatting debugfs entry rsrc_alloc. With the existing rsrc_alloc's format, there is misalignment for the pcifunc entries whose VF's index is a double digit. This patch fixes this. pcifunc NPA NIX0 NIX1 SSO GROUP SSOWS TIM CPT0 CPT1 REE0 REE1 PF0:VF0 8 5 PF0:VF1 9 3 PF0:VF10 18 10 PF0:VF11 19 8 PF0:VF12 20 11 PF0:VF13 21 9 PF0:VF14 22 12 PF0:VF15 23 10 PF1 0 0 Fixes: 23205e6d06d4 ("octeontx2-af: Dump current resource provisioning status") Signed-off-by: Rakesh Babu Signed-off-by: Hariprasad Kelam Signed-off-by: Sunil Kovvuri Goutham Signed-off-by: David S. Miller --- .../ethernet/marvell/octeontx2/af/rvu_debugfs.c | 46 ++++++++++++++-------- 1 file changed, 29 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c index aa2ca8780b9c..dc946953af06 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c @@ -234,12 +234,14 @@ static ssize_t rvu_dbg_rsrc_attach_status(struct file *filp, char __user *buffer, size_t count, loff_t *ppos) { - int index, off = 0, flag = 0, go_back = 0, off_prev; + int index, off = 0, flag = 0, go_back = 0, len = 0; struct rvu *rvu = filp->private_data; int lf, pf, vf, pcifunc; struct rvu_block block; int bytes_not_copied; + int lf_str_size = 12; int buf_size = 2048; + char *lfs; char *buf; /* don't allow partial reads */ @@ -249,12 +251,18 @@ static ssize_t rvu_dbg_rsrc_attach_status(struct file *filp, buf = kzalloc(buf_size, GFP_KERNEL); if (!buf) return -ENOSPC; - off += scnprintf(&buf[off], buf_size - 1 - off, "\npcifunc\t\t"); + + lfs = kzalloc(lf_str_size, GFP_KERNEL); + if (!lfs) + return -ENOMEM; + off += scnprintf(&buf[off], buf_size - 1 - off, "%-*s", lf_str_size, + "pcifunc"); for (index = 0; index < BLK_COUNT; index++) - if (strlen(rvu->hw->block[index].name)) - off += scnprintf(&buf[off], buf_size - 1 - off, - "%*s\t", (index - 1) * 2, - rvu->hw->block[index].name); + if (strlen(rvu->hw->block[index].name)) { + off += scnprintf(&buf[off], buf_size - 1 - off, + "%-*s", lf_str_size, + rvu->hw->block[index].name); + } off += scnprintf(&buf[off], buf_size - 1 - off, "\n"); for (pf = 0; pf < rvu->hw->total_pfs; pf++) { for (vf = 0; vf <= rvu->hw->total_vfs; vf++) { @@ -263,14 +271,15 @@ static ssize_t rvu_dbg_rsrc_attach_status(struct file *filp, continue; if (vf) { + sprintf(lfs, "PF%d:VF%d", pf, vf - 1); go_back = scnprintf(&buf[off], buf_size - 1 - off, - "PF%d:VF%d\t\t", pf, - vf - 1); + "%-*s", lf_str_size, lfs); } else { + sprintf(lfs, "PF%d", pf); go_back = scnprintf(&buf[off], buf_size - 1 - off, - "PF%d\t\t", pf); + "%-*s", lf_str_size, lfs); } off += go_back; @@ -278,20 +287,22 @@ static ssize_t rvu_dbg_rsrc_attach_status(struct file *filp, block = rvu->hw->block[index]; if (!strlen(block.name)) continue; - off_prev = off; + len = 0; + lfs[len] = '\0'; for (lf = 0; lf < block.lf.max; lf++) { if (block.fn_map[lf] != pcifunc) continue; flag = 1; - off += scnprintf(&buf[off], buf_size - 1 - - off, "%3d,", lf); + len += sprintf(&lfs[len], "%d,", lf); } - if (flag && off_prev != off) - off--; - else - go_back++; + + if (flag) + len--; + lfs[len] = '\0'; off += scnprintf(&buf[off], buf_size - 1 - off, - "\t"); + "%-*s", lf_str_size, lfs); + if (!strlen(lfs)) + go_back += lf_str_size; } if (!flag) off -= go_back; @@ -303,6 +314,7 @@ static ssize_t rvu_dbg_rsrc_attach_status(struct file *filp, } bytes_not_copied = copy_to_user(buffer, buf, off); + kfree(lfs); kfree(buf); if (bytes_not_copied) -- cgit v1.2.3 From ce86c2a531e2f2995ee55ea527c1f39ba1d95f73 Mon Sep 17 00:00:00 2001 From: Subbaraya Sundeep Date: Thu, 18 Mar 2021 19:45:44 +0530 Subject: octeontx2-af: Remove TOS field from MKEX TX The MKEX profile describes what packet fields need to be extracted from the input packet and how to place those packet fields in the output key for MCAM matching. The MKEX profile can be in a way where higher layer packet fields can overwrite lower layer packet fields in output MCAM Key. Hence MKEX profile is always ensured that there are no overlaps between any of the layers. But the commit 42006910b5ea ("octeontx2-af: cleanup KPU config data") introduced TX TOS field which overlaps with DMAC in MCAM key. This led to AF driver returning error when TX rule is installed with DMAC as match criteria since DMAC gets overwritten and cannot be supported. This patch fixes the issue by removing TOS field from MKEX TX profile. Fixes: 42006910b5ea ("octeontx2-af: cleanup KPU config data") Signed-off-by: Subbaraya Sundeep Signed-off-by: Hariprasad Kelam Signed-off-by: Sunil Kovvuri Goutham Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/octeontx2/af/npc_profile.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/octeontx2/af/npc_profile.h b/drivers/net/ethernet/marvell/octeontx2/af/npc_profile.h index b192692b4fc4..5c372d2c24a1 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/npc_profile.h +++ b/drivers/net/ethernet/marvell/octeontx2/af/npc_profile.h @@ -13499,8 +13499,6 @@ static struct npc_mcam_kex npc_mkex_default = { [NPC_LT_LC_IP] = { /* SIP+DIP: 8 bytes, KW2[63:0] */ KEX_LD_CFG(0x07, 0xc, 0x1, 0x0, 0x10), - /* TOS: 1 byte, KW1[63:56] */ - KEX_LD_CFG(0x0, 0x1, 0x1, 0x0, 0xf), }, /* Layer C: IPv6 */ [NPC_LT_LC_IP6] = { -- cgit v1.2.3 From 297887872973555cb9fb83fdd5a2748d6cd8fc1d Mon Sep 17 00:00:00 2001 From: Subbaraya Sundeep Date: Thu, 18 Mar 2021 19:45:45 +0530 Subject: octeontx2-af: Return correct CGX RX fifo size CGX receive buffer size is a constant value and cannot be read from CGX0 block always since CGX0 may not enabled everytime. Hence return CGX receive buffer size from first enabled CGX block instead of CGX0. Fixes: 6e54e1c5399a ("octeontx2-af: cn10K: MTU configuration") Signed-off-by: Subbaraya Sundeep Signed-off-by: Hariprasad Kelam Signed-off-by: Sunil Kovvuri Goutham Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/octeontx2/af/rvu.h | 1 + drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c | 18 ++++++++++++++++-- .../net/ethernet/marvell/octeontx2/af/rvu_debugfs.c | 9 +++++---- 3 files changed, 22 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h index fa6e46e36ae4..76f399229ddb 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h @@ -678,6 +678,7 @@ void npc_read_mcam_entry(struct rvu *rvu, struct npc_mcam *mcam, u8 *intf, u8 *ena); bool is_mac_feature_supported(struct rvu *rvu, int pf, int feature); u32 rvu_cgx_get_fifolen(struct rvu *rvu); +void *rvu_first_cgx_pdata(struct rvu *rvu); /* CPT APIs */ int rvu_cpt_lf_teardown(struct rvu *rvu, u16 pcifunc, int lf, int slot); diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c index e668e482383a..6e2bf4fcd29c 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c @@ -89,6 +89,21 @@ void *rvu_cgx_pdata(u8 cgx_id, struct rvu *rvu) return rvu->cgx_idmap[cgx_id]; } +/* Return first enabled CGX instance if none are enabled then return NULL */ +void *rvu_first_cgx_pdata(struct rvu *rvu) +{ + int first_enabled_cgx = 0; + void *cgxd = NULL; + + for (; first_enabled_cgx < rvu->cgx_cnt_max; first_enabled_cgx++) { + cgxd = rvu_cgx_pdata(first_enabled_cgx, rvu); + if (cgxd) + break; + } + + return cgxd; +} + /* Based on P2X connectivity find mapped NIX block for a PF */ static void rvu_map_cgx_nix_block(struct rvu *rvu, int pf, int cgx_id, int lmac_id) @@ -711,10 +726,9 @@ int rvu_mbox_handler_cgx_features_get(struct rvu *rvu, u32 rvu_cgx_get_fifolen(struct rvu *rvu) { struct mac_ops *mac_ops; - int rvu_def_cgx_id = 0; u32 fifo_len; - mac_ops = get_mac_ops(rvu_cgx_pdata(rvu_def_cgx_id, rvu)); + mac_ops = get_mac_ops(rvu_first_cgx_pdata(rvu)); fifo_len = mac_ops ? mac_ops->fifo_len : 0; return fifo_len; diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c index dc946953af06..b4c53b19f535 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c @@ -331,7 +331,6 @@ static int rvu_dbg_rvu_pf_cgx_map_display(struct seq_file *filp, void *unused) struct rvu *rvu = filp->private; struct pci_dev *pdev = NULL; struct mac_ops *mac_ops; - int rvu_def_cgx_id = 0; char cgx[10], lmac[10]; struct rvu_pfvf *pfvf; int pf, domain, blkid; @@ -339,7 +338,10 @@ static int rvu_dbg_rvu_pf_cgx_map_display(struct seq_file *filp, void *unused) u16 pcifunc; domain = 2; - mac_ops = get_mac_ops(rvu_cgx_pdata(rvu_def_cgx_id, rvu)); + mac_ops = get_mac_ops(rvu_first_cgx_pdata(rvu)); + /* There can be no CGX devices at all */ + if (!mac_ops) + return 0; seq_printf(filp, "PCI dev\t\tRVU PF Func\tNIX block\t%s\tLMAC\n", mac_ops->name); for (pf = 0; pf < rvu->hw->total_pfs; pf++) { @@ -1830,7 +1832,6 @@ static void rvu_dbg_cgx_init(struct rvu *rvu) { struct mac_ops *mac_ops; unsigned long lmac_bmap; - int rvu_def_cgx_id = 0; int i, lmac_id; char dname[20]; void *cgx; @@ -1838,7 +1839,7 @@ static void rvu_dbg_cgx_init(struct rvu *rvu) if (!cgx_get_cgxcnt_max()) return; - mac_ops = get_mac_ops(rvu_cgx_pdata(rvu_def_cgx_id, rvu)); + mac_ops = get_mac_ops(rvu_first_cgx_pdata(rvu)); if (!mac_ops) return; -- cgit v1.2.3 From ae2619dd4fccdad9876aa5f900bd85484179c50f Mon Sep 17 00:00:00 2001 From: Geetha sowjanya Date: Thu, 18 Mar 2021 19:45:46 +0530 Subject: octeontx2-af: Fix irq free in rvu teardown Current devlink code try to free already freed irqs as the irq_allocate flag is not cleared after free leading to kernel crash while removing rvu driver. The patch fixes the irq free sequence and clears the irq_allocate flag on free. Fixes: 7304ac4567bc ("octeontx2-af: Add mailbox IRQ and msg handlers") Signed-off-by: Geetha sowjanya Signed-off-by: Hariprasad Kelam Signed-off-by: Sunil Kovvuri Goutham Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/octeontx2/af/rvu.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu.c index d9a1a71c7ccc..ab24a5e8ee8a 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.c @@ -2462,8 +2462,10 @@ static void rvu_unregister_interrupts(struct rvu *rvu) INTR_MASK(rvu->hw->total_pfs) & ~1ULL); for (irq = 0; irq < rvu->num_vec; irq++) { - if (rvu->irq_allocated[irq]) + if (rvu->irq_allocated[irq]) { free_irq(pci_irq_vector(rvu->pdev, irq), rvu); + rvu->irq_allocated[irq] = false; + } } pci_free_irq_vectors(rvu->pdev); @@ -2975,8 +2977,8 @@ static void rvu_remove(struct pci_dev *pdev) struct rvu *rvu = pci_get_drvdata(pdev); rvu_dbg_exit(rvu); - rvu_unregister_interrupts(rvu); rvu_unregister_dl(rvu); + rvu_unregister_interrupts(rvu); rvu_flr_wq_destroy(rvu); rvu_cgx_exit(rvu); rvu_fwdata_exit(rvu); -- cgit v1.2.3 From f12098ce9b43e1a6fcaa524acbd90f9118a74c0a Mon Sep 17 00:00:00 2001 From: Geetha sowjanya Date: Thu, 18 Mar 2021 19:45:47 +0530 Subject: octeontx2-pf: Clear RSS enable flag on interace down RSS configuration can not be get/set when interface is in down state as they required mbox communication. RSS enable flag status is used for set/get configuration. Current code do not clear the RSS enable flag on interface down which lead to mbox error while trying to set/get RSS configuration. Fixes: 85069e95e531 ("octeontx2-pf: Receive side scaling support") Signed-off-by: Geetha sowjanya Signed-off-by: Hariprasad Kelam Signed-off-by: Sunil Kovvuri Goutham Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c index 53ab1814d74b..2fd3d235d292 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c @@ -1672,6 +1672,7 @@ int otx2_stop(struct net_device *netdev) struct otx2_nic *pf = netdev_priv(netdev); struct otx2_cq_poll *cq_poll = NULL; struct otx2_qset *qset = &pf->qset; + struct otx2_rss_info *rss; int qidx, vec, wrk; netif_carrier_off(netdev); @@ -1684,6 +1685,10 @@ int otx2_stop(struct net_device *netdev) /* First stop packet Rx/Tx */ otx2_rxtx_enable(pf, false); + /* Clear RSS enable flag */ + rss = &pf->hw.rss_info; + rss->enable = false; + /* Cleanup Queue IRQ */ vec = pci_irq_vector(pf->pdev, pf->hw.nix_msixoff + NIX_LF_QINT_VEC_START); -- cgit v1.2.3 From 64451b98306bf1334a62bcd020ec92bdb4cb68db Mon Sep 17 00:00:00 2001 From: Hariprasad Kelam Date: Thu, 18 Mar 2021 19:45:48 +0530 Subject: octeontx2-af: fix infinite loop in unmapping NPC counter unmapping npc counter works in a way by traversing all mcam entries to find which mcam rule is associated with counter. But loop cursor variable 'entry' is not incremented before checking next mcam entry which resulting in infinite loop. This in turn hogs the kworker thread forever and no other mbox message is processed by AF driver after that. Fix this by updating entry value before checking next mcam entry. Fixes: a958dd59f9ce ("octeontx2-af: Map or unmap NPC MCAM entry and counter") Signed-off-by: Hariprasad Kelam Signed-off-by: Sunil Kovvuri Goutham Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c index 04bb0803a5c5..0bd49c7080a6 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c @@ -2490,10 +2490,10 @@ int rvu_mbox_handler_npc_mcam_free_counter(struct rvu *rvu, index = find_next_bit(mcam->bmap, mcam->bmap_entries, entry); if (index >= mcam->bmap_entries) break; + entry = index + 1; if (mcam->entry2cntr_map[index] != req->cntr) continue; - entry = index + 1; npc_unmap_mcam_entry_and_cntr(rvu, mcam, blkaddr, index, req->cntr); } -- cgit v1.2.3 From 8c16cb0304cd582e83584b81813a3404e9c7db47 Mon Sep 17 00:00:00 2001 From: Subbaraya Sundeep Date: Thu, 18 Mar 2021 19:45:49 +0530 Subject: octeontx2-af: Fix uninitialized variable warning Initialize l4_key_offset variable to fix uninitialized variable compiler warning. Fixes: b9b7421a01d8 ("octeontx2-af: Support ESP/AH RSS hashing") Signed-off-by: Subbaraya Sundeep Signed-off-by: Hariprasad Kelam Signed-off-by: Sunil Kovvuri Goutham Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c index d3000194e2d3..3d068b7d46bd 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c @@ -2629,7 +2629,7 @@ static int set_flowkey_fields(struct nix_rx_flowkey_alg *alg, u32 flow_cfg) struct nix_rx_flowkey_alg *field; struct nix_rx_flowkey_alg tmp; u32 key_type, valid_key; - int l4_key_offset; + int l4_key_offset = 0; if (!alg) return -EINVAL; -- cgit v1.2.3 From 600cc3c9c62defd920da07bc585eb739247bb732 Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Thu, 18 Mar 2021 17:25:08 +0000 Subject: net: marvell: Remove reference to CONFIG_MV64X60 Commit 92c8c16f3457 ("powerpc/embedded6xx: Remove C2K board support") removed last selector of CONFIG_MV64X60. As it is not a user selectable config item, all references to it are stale. Remove them. Signed-off-by: Christophe Leroy Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/Kconfig | 4 ++-- drivers/net/ethernet/marvell/mv643xx_eth.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/Kconfig b/drivers/net/ethernet/marvell/Kconfig index 7fe15a3286f4..fe0989c0fc25 100644 --- a/drivers/net/ethernet/marvell/Kconfig +++ b/drivers/net/ethernet/marvell/Kconfig @@ -6,7 +6,7 @@ config NET_VENDOR_MARVELL bool "Marvell devices" default y - depends on PCI || CPU_PXA168 || MV64X60 || PPC32 || PLAT_ORION || INET || COMPILE_TEST + depends on PCI || CPU_PXA168 || PPC32 || PLAT_ORION || INET || COMPILE_TEST help If you have a network (Ethernet) card belonging to this class, say Y. @@ -19,7 +19,7 @@ if NET_VENDOR_MARVELL config MV643XX_ETH tristate "Marvell Discovery (643XX) and Orion ethernet support" - depends on MV64X60 || PPC32 || PLAT_ORION || COMPILE_TEST + depends on PPC32 || PLAT_ORION || COMPILE_TEST depends on INET select PHYLIB select MVMDIO diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c index 90e6111ce534..3bfb659b5c99 100644 --- a/drivers/net/ethernet/marvell/mv643xx_eth.c +++ b/drivers/net/ethernet/marvell/mv643xx_eth.c @@ -2684,7 +2684,7 @@ static const struct of_device_id mv643xx_eth_shared_ids[] = { MODULE_DEVICE_TABLE(of, mv643xx_eth_shared_ids); #endif -#if defined(CONFIG_OF_IRQ) && !defined(CONFIG_MV64X60) +#ifdef CONFIG_OF_IRQ #define mv643xx_eth_property(_np, _name, _v) \ do { \ u32 tmp; \ -- cgit v1.2.3 From 491aef7caeb345ccfd658a7fc8a42944a7f82494 Mon Sep 17 00:00:00 2001 From: Georgi Djakov Date: Thu, 18 Mar 2021 18:34:15 +0200 Subject: interconnect: Fix kerneldoc warning Fix the following warning: drivers/interconnect/bulk.c:63: warning: expecting prototype for icc_bulk_set(). Prototype was for icc_bulk_set_bw() instead Link: https://lore.kernel.org/r/20210318163415.30941-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov --- drivers/interconnect/bulk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/interconnect/bulk.c b/drivers/interconnect/bulk.c index 73e2c8d0a412..448cc536aa79 100644 --- a/drivers/interconnect/bulk.c +++ b/drivers/interconnect/bulk.c @@ -53,7 +53,7 @@ void icc_bulk_put(int num_paths, struct icc_bulk_data *paths) EXPORT_SYMBOL_GPL(icc_bulk_put); /** - * icc_bulk_set() - set bandwidth to a set of paths + * icc_bulk_set_bw() - set bandwidth to a set of paths * @num_paths: the number of icc_bulk_data * @paths: the icc_bulk_data table containing the paths and bandwidth * -- cgit v1.2.3 From c79a707072fe3fea0e3c92edee6ca85c1e53c29f Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 18 Mar 2021 16:57:49 +0100 Subject: net: cdc-phonet: fix data-interface release on probe failure Set the disconnected flag before releasing the data interface in case netdev registration fails to avoid having the disconnect callback try to deregister the never registered netdev (and trigger a WARN_ON()). Fixes: 87cf65601e17 ("USB host CDC Phonet network interface driver") Signed-off-by: Johan Hovold Signed-off-by: David S. Miller --- drivers/net/usb/cdc-phonet.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/usb/cdc-phonet.c b/drivers/net/usb/cdc-phonet.c index 02e6bbb17b15..8d1f69dad603 100644 --- a/drivers/net/usb/cdc-phonet.c +++ b/drivers/net/usb/cdc-phonet.c @@ -387,6 +387,8 @@ static int usbpn_probe(struct usb_interface *intf, const struct usb_device_id *i err = register_netdev(dev); if (err) { + /* Set disconnected flag so that disconnect() returns early. */ + pnd->disconnected = 1; usb_driver_release_interface(&usbpn_driver, data_intf); goto out; } -- cgit v1.2.3 From 896ea5dab25ef12f7d0988b8f0b053a287faf889 Mon Sep 17 00:00:00 2001 From: Tom Seewald Date: Sun, 21 Feb 2021 22:00:04 -0600 Subject: e1000e: Fix duplicate include guard The include guard "_E1000_HW_H_" is used by header files in three different drivers (e1000/e1000_hw.h, e1000e/hw.h, and igb/e1000_hw.h). Using the same include guard macro in more than one header file may cause unexpected behavior from the compiler. Fix the duplicate include guard in the e1000e driver by renaming it. Fixes: bc7f75fa9788 ("[E1000E]: New pci-express e1000 driver (currently for ICH9 devices only)") Signed-off-by: Tom Seewald Tested-by: Dvora Fuxbrumer Acked-by: Sasha Neftin Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/e1000e/hw.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h index 69a2329ea463..db79c4e6413e 100644 --- a/drivers/net/ethernet/intel/e1000e/hw.h +++ b/drivers/net/ethernet/intel/e1000e/hw.h @@ -1,8 +1,8 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* Copyright(c) 1999 - 2018 Intel Corporation. */ -#ifndef _E1000_HW_H_ -#define _E1000_HW_H_ +#ifndef _E1000E_HW_H_ +#define _E1000E_HW_H_ #include "regs.h" #include "defines.h" @@ -714,4 +714,4 @@ struct e1000_hw { #include "80003es2lan.h" #include "ich8lan.h" -#endif +#endif /* _E1000E_HW_H_ */ -- cgit v1.2.3 From a75519a84855bca029ce7d8a27de9409d9b84956 Mon Sep 17 00:00:00 2001 From: Tom Seewald Date: Sun, 21 Feb 2021 22:00:05 -0600 Subject: igb: Fix duplicate include guard The include guard "_E1000_HW_H_" is used by two separate header files in two different drivers (e1000/e1000_hw.h and igb/e1000_hw.h). Using the same include guard macro in more than one header file may cause unexpected behavior from the compiler. Fix this by renaming the duplicate guard in the igb driver. Fixes: 9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver") Signed-off-by: Tom Seewald Reviewed-by: Jesse Brandeburg Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/igb/e1000_hw.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/igb/e1000_hw.h b/drivers/net/ethernet/intel/igb/e1000_hw.h index 5d87957b2627..44111f65afc7 100644 --- a/drivers/net/ethernet/intel/igb/e1000_hw.h +++ b/drivers/net/ethernet/intel/igb/e1000_hw.h @@ -1,8 +1,8 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* Copyright(c) 2007 - 2018 Intel Corporation. */ -#ifndef _E1000_HW_H_ -#define _E1000_HW_H_ +#ifndef _E1000_IGB_HW_H_ +#define _E1000_IGB_HW_H_ #include #include @@ -551,4 +551,4 @@ s32 igb_write_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value); void igb_read_pci_cfg(struct e1000_hw *hw, u32 reg, u16 *value); void igb_write_pci_cfg(struct e1000_hw *hw, u32 reg, u16 *value); -#endif /* _E1000_HW_H_ */ +#endif /* _E1000_IGB_HW_H_ */ -- cgit v1.2.3 From f0a03a026857d6c7766eb7d5835edbf5523ca15c Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Wed, 3 Mar 2021 12:51:03 -0800 Subject: igb: check timestamp validity Add a couple of checks to make sure timestamping is on and that the timestamp value from DMA is valid. This avoids any functional issues that could come from a misinterpreted time stamp. One of the functions changed doesn't need a return value added because there was no value in checking from the calling locations. While here, fix a couple of reverse christmas tree issues next to the code being changed. Fixes: f56e7bba22fa ("igb: Pull timestamp from fragment before adding it to skb") Fixes: 9cbc948b5a20 ("igb: add XDP support") Signed-off-by: Jesse Brandeburg Tested-by: Dave Switzer Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/igb/igb.h | 4 ++-- drivers/net/ethernet/intel/igb/igb_main.c | 11 ++++++----- drivers/net/ethernet/intel/igb/igb_ptp.c | 31 ++++++++++++++++++++++++------- 3 files changed, 32 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h index aaa954aae574..7bda8c5edea5 100644 --- a/drivers/net/ethernet/intel/igb/igb.h +++ b/drivers/net/ethernet/intel/igb/igb.h @@ -748,8 +748,8 @@ void igb_ptp_suspend(struct igb_adapter *adapter); void igb_ptp_rx_hang(struct igb_adapter *adapter); void igb_ptp_tx_hang(struct igb_adapter *adapter); void igb_ptp_rx_rgtstamp(struct igb_q_vector *q_vector, struct sk_buff *skb); -void igb_ptp_rx_pktstamp(struct igb_q_vector *q_vector, void *va, - struct sk_buff *skb); +int igb_ptp_rx_pktstamp(struct igb_q_vector *q_vector, void *va, + struct sk_buff *skb); int igb_ptp_set_ts_config(struct net_device *netdev, struct ifreq *ifr); int igb_ptp_get_ts_config(struct net_device *netdev, struct ifreq *ifr); void igb_set_flag_queue_pairs(struct igb_adapter *, const u32); diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index d3b37761f637..a45cd2b416c8 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -8302,9 +8302,10 @@ static struct sk_buff *igb_construct_skb(struct igb_ring *rx_ring, return NULL; if (unlikely(igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TSIP))) { - igb_ptp_rx_pktstamp(rx_ring->q_vector, xdp->data, skb); - xdp->data += IGB_TS_HDR_LEN; - size -= IGB_TS_HDR_LEN; + if (!igb_ptp_rx_pktstamp(rx_ring->q_vector, xdp->data, skb)) { + xdp->data += IGB_TS_HDR_LEN; + size -= IGB_TS_HDR_LEN; + } } /* Determine available headroom for copy */ @@ -8365,8 +8366,8 @@ static struct sk_buff *igb_build_skb(struct igb_ring *rx_ring, /* pull timestamp out of packet data */ if (igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TSIP)) { - igb_ptp_rx_pktstamp(rx_ring->q_vector, skb->data, skb); - __skb_pull(skb, IGB_TS_HDR_LEN); + if (!igb_ptp_rx_pktstamp(rx_ring->q_vector, skb->data, skb)) + __skb_pull(skb, IGB_TS_HDR_LEN); } /* update buffer offset */ diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c b/drivers/net/ethernet/intel/igb/igb_ptp.c index 7cc5428c3b3d..86a576201f5f 100644 --- a/drivers/net/ethernet/intel/igb/igb_ptp.c +++ b/drivers/net/ethernet/intel/igb/igb_ptp.c @@ -856,6 +856,9 @@ static void igb_ptp_tx_hwtstamp(struct igb_adapter *adapter) dev_kfree_skb_any(skb); } +#define IGB_RET_PTP_DISABLED 1 +#define IGB_RET_PTP_INVALID 2 + /** * igb_ptp_rx_pktstamp - retrieve Rx per packet timestamp * @q_vector: Pointer to interrupt specific structure @@ -864,19 +867,29 @@ static void igb_ptp_tx_hwtstamp(struct igb_adapter *adapter) * * This function is meant to retrieve a timestamp from the first buffer of an * incoming frame. The value is stored in little endian format starting on - * byte 8. + * byte 8 + * + * Returns: 0 if success, nonzero if failure **/ -void igb_ptp_rx_pktstamp(struct igb_q_vector *q_vector, void *va, - struct sk_buff *skb) +int igb_ptp_rx_pktstamp(struct igb_q_vector *q_vector, void *va, + struct sk_buff *skb) { - __le64 *regval = (__le64 *)va; struct igb_adapter *adapter = q_vector->adapter; + __le64 *regval = (__le64 *)va; int adjust = 0; + if (!(adapter->ptp_flags & IGB_PTP_ENABLED)) + return IGB_RET_PTP_DISABLED; + /* The timestamp is recorded in little endian format. * DWORD: 0 1 2 3 * Field: Reserved Reserved SYSTIML SYSTIMH */ + + /* check reserved dwords are zero, be/le doesn't matter for zero */ + if (regval[0]) + return IGB_RET_PTP_INVALID; + igb_ptp_systim_to_hwtstamp(adapter, skb_hwtstamps(skb), le64_to_cpu(regval[1])); @@ -896,6 +909,8 @@ void igb_ptp_rx_pktstamp(struct igb_q_vector *q_vector, void *va, } skb_hwtstamps(skb)->hwtstamp = ktime_sub_ns(skb_hwtstamps(skb)->hwtstamp, adjust); + + return 0; } /** @@ -906,13 +921,15 @@ void igb_ptp_rx_pktstamp(struct igb_q_vector *q_vector, void *va, * This function is meant to retrieve a timestamp from the internal registers * of the adapter and store it in the skb. **/ -void igb_ptp_rx_rgtstamp(struct igb_q_vector *q_vector, - struct sk_buff *skb) +void igb_ptp_rx_rgtstamp(struct igb_q_vector *q_vector, struct sk_buff *skb) { struct igb_adapter *adapter = q_vector->adapter; struct e1000_hw *hw = &adapter->hw; - u64 regval; int adjust = 0; + u64 regval; + + if (!(adapter->ptp_flags & IGB_PTP_ENABLED)) + return; /* If this bit is set, then the RX registers contain the time stamp. No * other packet will be time stamped until we read these registers, so -- cgit v1.2.3 From c1d1e25a8c542816ae8dee41b81a18d30c7519a0 Mon Sep 17 00:00:00 2001 From: Chris Chiu Date: Fri, 12 Mar 2021 11:24:30 +0800 Subject: ACPI: video: Add missing callback back for Sony VPCEH3U1E The .callback of the quirk for Sony VPCEH3U1E was unintetionally removed by the commit 25417185e9b5 ("ACPI: video: Add DMI quirk for GIGABYTE GB-BXBT-2807"). Add it back to make sure the quirk for Sony VPCEH3U1E works as expected. Fixes: 25417185e9b5 ("ACPI: video: Add DMI quirk for GIGABYTE GB-BXBT-2807") Signed-off-by: Chris Chiu Reported-by: Pavel Machek Reviewed-by: Pavel Machek (CIP) Cc: 5.11+ # 5.11+ Signed-off-by: Rafael J. Wysocki --- drivers/acpi/video_detect.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c index 811d298637cb..83cd4c95faf0 100644 --- a/drivers/acpi/video_detect.c +++ b/drivers/acpi/video_detect.c @@ -147,6 +147,7 @@ static const struct dmi_system_id video_detect_dmi_table[] = { }, }, { + .callback = video_detect_force_vendor, .ident = "Sony VPCEH3U1E", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), -- cgit v1.2.3 From f91a50d8b51b5c8ef1cfb08115a005bba4250507 Mon Sep 17 00:00:00 2001 From: Hayes Wang Date: Fri, 19 Mar 2021 15:37:21 +0800 Subject: r8152: limit the RX buffer size of RTL8153A for USB 2.0 If the USB host controller is EHCI, the throughput is reduced from 300Mb/s to 60Mb/s, when the rx buffer size is modified from 16K to 32K. According to the EHCI spec, the maximum size of the qTD is 20K. Therefore, when the driver uses more than 20K buffer, the latency time of EHCI would be increased. And, it let the RTL8153A get worse throughput. However, the driver uses alloc_pages() for rx buffer, so I limit the rx buffer to 16K rather than 20K. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205923 Fixes: ec5791c202ac ("r8152: separate the rx buffer size") Reported-by: Robert Davies Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 90f1c0200042..20fb5638ac65 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -6553,7 +6553,10 @@ static int rtl_ops_init(struct r8152 *tp) ops->in_nway = rtl8153_in_nway; ops->hw_phy_cfg = r8153_hw_phy_cfg; ops->autosuspend_en = rtl8153_runtime_enable; - tp->rx_buf_sz = 32 * 1024; + if (tp->udev->speed < USB_SPEED_SUPER) + tp->rx_buf_sz = 16 * 1024; + else + tp->rx_buf_sz = 32 * 1024; tp->eee_en = true; tp->eee_adv = MDIO_EEE_1000T | MDIO_EEE_100TX; break; -- cgit v1.2.3 From cd5297b0855f17c8b4e3ef1d20c6a3656209c7b3 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Mon, 1 Mar 2021 10:52:53 +0100 Subject: drm/etnaviv: Use FOLL_FORCE for userptr Nothing checks userptr.ro except this call to pup_fast, which means there's nothing actually preventing userspace from writing to this. Which means you can just read-only mmap any file you want, userptr it and then write to it with the gpu. Not good. The right way to handle this is FOLL_WRITE | FOLL_FORCE, which will break any COW mappings and update tracking for MAY_WRITE mappings so there's no exploit and the vm isn't confused about what's going on. For any legit use case there's no difference from what userspace can observe and do. Reviewed-by: Lucas Stach Cc: stable@vger.kernel.org Cc: John Hubbard Signed-off-by: Daniel Vetter Cc: Lucas Stach Cc: Russell King Cc: Christian Gmeiner Cc: etnaviv@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20210301095254.1946084-1-daniel.vetter@ffwll.ch --- drivers/gpu/drm/etnaviv/etnaviv_gem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gem.c b/drivers/gpu/drm/etnaviv/etnaviv_gem.c index 6d38c5c17f23..a9e696d05b33 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_gem.c +++ b/drivers/gpu/drm/etnaviv/etnaviv_gem.c @@ -689,7 +689,7 @@ static int etnaviv_gem_userptr_get_pages(struct etnaviv_gem_object *etnaviv_obj) struct page **pages = pvec + pinned; ret = pin_user_pages_fast(ptr, num_pages, - !userptr->ro ? FOLL_WRITE : 0, pages); + FOLL_WRITE | FOLL_FORCE, pages); if (ret < 0) { unpin_user_pages(pvec, pinned); kvfree(pvec); -- cgit v1.2.3 From 50891bead80bc79871528c2962d65c781c02330b Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Mon, 1 Mar 2021 10:52:54 +0100 Subject: drm/etnaviv: User FOLL_LONGTERM in userptr There's no mmu notifier or anything like that, releasing this pin is entirely up to userspace. Hence FOLL_LONGTERM. No cc: stable for this patch since a lot of the infrastructure around FOLL_LONGETRM (like not allowing it for pages currently sitting in ZONE_MOVEABLE before they're migrated) is still being worked on. So not big benefits yet. Reviewed-by: John Hubbard Cc: John Hubbard Signed-off-by: Daniel Vetter Cc: Lucas Stach Cc: Russell King Cc: Christian Gmeiner Cc: etnaviv@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20210301095254.1946084-2-daniel.vetter@ffwll.ch --- drivers/gpu/drm/etnaviv/etnaviv_gem.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gem.c b/drivers/gpu/drm/etnaviv/etnaviv_gem.c index a9e696d05b33..db69f19ab5bc 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_gem.c +++ b/drivers/gpu/drm/etnaviv/etnaviv_gem.c @@ -689,7 +689,8 @@ static int etnaviv_gem_userptr_get_pages(struct etnaviv_gem_object *etnaviv_obj) struct page **pages = pvec + pinned; ret = pin_user_pages_fast(ptr, num_pages, - FOLL_WRITE | FOLL_FORCE, pages); + FOLL_WRITE | FOLL_FORCE | FOLL_LONGTERM, + pages); if (ret < 0) { unpin_user_pages(pvec, pinned); kvfree(pvec); -- cgit v1.2.3 From 014dfa26ce1c647af09bf506285ef67e0e3f0a6b Mon Sep 17 00:00:00 2001 From: Corentin Labbe Date: Fri, 19 Mar 2021 13:44:22 +0000 Subject: net: stmmac: dwmac-sun8i: Provide TX and RX fifo sizes MTU cannot be changed on dwmac-sun8i. (ip link set eth0 mtu xxx returning EINVAL) This is due to tx_fifo_size being 0, since this value is used to compute valid MTU range. Like dwmac-sunxi (with commit 806fd188ce2a ("net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizes")) dwmac-sun8i need to have tx and rx fifo sizes set. I have used values from datasheets. After this patch, setting a non-default MTU (like 1000) value works and network is still useable. Tested-on: sun8i-h3-orangepi-pc Tested-on: sun8i-r40-bananapi-m2-ultra Tested-on: sun50i-a64-bananapi-m64 Tested-on: sun50i-h5-nanopi-neo-plus2 Tested-on: sun50i-h6-pine-h64 Fixes: 9f93ac8d408 ("net-next: stmmac: Add dwmac-sun8i") Reported-by: Belisko Marek Signed-off-by: Corentin Labbe Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c index 6b75cf2603ff..e62efd166ec8 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c @@ -1214,6 +1214,8 @@ static int sun8i_dwmac_probe(struct platform_device *pdev) plat_dat->init = sun8i_dwmac_init; plat_dat->exit = sun8i_dwmac_exit; plat_dat->setup = sun8i_dwmac_setup; + plat_dat->tx_fifo_size = 4096; + plat_dat->rx_fifo_size = 16384; ret = sun8i_dwmac_set_syscon(&pdev->dev, plat_dat); if (ret) -- cgit v1.2.3 From 5d7047ed6b7214fbabc16d8712a822e256b1aa44 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Sat, 20 Mar 2021 20:21:54 +0100 Subject: can: peak_usb: Revert "can: peak_usb: add forgotten supported devices" In commit 6417f03132a6 ("module: remove never implemented MODULE_SUPPORTED_DEVICE") the MODULE_SUPPORTED_DEVICE macro was removed from the kerne entirely. Shortly before this patch was applied mainline the commit 59ec7b89ed3e ("can: peak_usb: add forgotten supported devices") was added to net/master. As this would result in a merge conflict, let's revert this patch. Fixes: 59ec7b89ed3e ("can: peak_usb: add forgotten supported devices") Link: https://lore.kernel.org/r/20210320192649.341832-1-mkl@pengutronix.de Suggested-by: Leon Romanovsky Cc: Stephane Grosjean Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/peak_usb/pcan_usb_fd.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c index f1d018218c93..f347ecc79aef 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c @@ -18,8 +18,6 @@ MODULE_SUPPORTED_DEVICE("PEAK-System PCAN-USB FD adapter"); MODULE_SUPPORTED_DEVICE("PEAK-System PCAN-USB Pro FD adapter"); -MODULE_SUPPORTED_DEVICE("PEAK-System PCAN-Chip USB"); -MODULE_SUPPORTED_DEVICE("PEAK-System PCAN-USB X6 adapter"); #define PCAN_USBPROFD_CHANNEL_COUNT 2 #define PCAN_USBFD_CHANNEL_COUNT 1 -- cgit v1.2.3 From b4afd4b90a7cfe54c7cd9db49e3c36d552325eac Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Sat, 20 Mar 2021 09:17:28 -0500 Subject: net: ipa: fix init header command validation We use ipa_cmd_header_valid() to ensure certain values we will program into hardware are within range, well in advance of when we actually program them. This way we avoid having to check for errors when we actually program the hardware. Unfortunately the dev_err() call for a bad offset value does not supply the arguments to match the format specifiers properly. Fix this. There was also supposed to be a check to ensure the size to be programmed fits in the field that holds it. Add this missing check. Rearrange the way we ensure the header table fits in overall IPA memory range. Finally, update ipa_cmd_table_valid() so the format of messages printed for errors matches what's done in ipa_cmd_header_valid(). Signed-off-by: Alex Elder Signed-off-by: David S. Miller --- drivers/net/ipa/ipa_cmd.c | 50 +++++++++++++++++++++++++++++++---------------- 1 file changed, 33 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ipa/ipa_cmd.c b/drivers/net/ipa/ipa_cmd.c index 35e35852c25c..d73b03a80ef8 100644 --- a/drivers/net/ipa/ipa_cmd.c +++ b/drivers/net/ipa/ipa_cmd.c @@ -175,21 +175,23 @@ bool ipa_cmd_table_valid(struct ipa *ipa, const struct ipa_mem *mem, : field_max(IP_FLTRT_FLAGS_NHASH_ADDR_FMASK); if (mem->offset > offset_max || ipa->mem_offset > offset_max - mem->offset) { - dev_err(dev, "IPv%c %s%s table region offset too large " - "(0x%04x + 0x%04x > 0x%04x)\n", - ipv6 ? '6' : '4', hashed ? "hashed " : "", - route ? "route" : "filter", - ipa->mem_offset, mem->offset, offset_max); + dev_err(dev, "IPv%c %s%s table region offset too large\n", + ipv6 ? '6' : '4', hashed ? "hashed " : "", + route ? "route" : "filter"); + dev_err(dev, " (0x%04x + 0x%04x > 0x%04x)\n", + ipa->mem_offset, mem->offset, offset_max); + return false; } if (mem->offset > ipa->mem_size || mem->size > ipa->mem_size - mem->offset) { - dev_err(dev, "IPv%c %s%s table region out of range " - "(0x%04x + 0x%04x > 0x%04x)\n", - ipv6 ? '6' : '4', hashed ? "hashed " : "", - route ? "route" : "filter", - mem->offset, mem->size, ipa->mem_size); + dev_err(dev, "IPv%c %s%s table region out of range\n", + ipv6 ? '6' : '4', hashed ? "hashed " : "", + route ? "route" : "filter"); + dev_err(dev, " (0x%04x + 0x%04x > 0x%04x)\n", + mem->offset, mem->size, ipa->mem_size); + return false; } @@ -205,22 +207,36 @@ static bool ipa_cmd_header_valid(struct ipa *ipa) u32 size_max; u32 size; + /* In ipa_cmd_hdr_init_local_add() we record the offset and size + * of the header table memory area. Make sure the offset and size + * fit in the fields that need to hold them, and that the entire + * range is within the overall IPA memory range. + */ offset_max = field_max(HDR_INIT_LOCAL_FLAGS_HDR_ADDR_FMASK); if (mem->offset > offset_max || ipa->mem_offset > offset_max - mem->offset) { - dev_err(dev, "header table region offset too large " - "(0x%04x + 0x%04x > 0x%04x)\n", - ipa->mem_offset + mem->offset, offset_max); + dev_err(dev, "header table region offset too large\n"); + dev_err(dev, " (0x%04x + 0x%04x > 0x%04x)\n", + ipa->mem_offset, mem->offset, offset_max); + return false; } size_max = field_max(HDR_INIT_LOCAL_FLAGS_TABLE_SIZE_FMASK); size = ipa->mem[IPA_MEM_MODEM_HEADER].size; size += ipa->mem[IPA_MEM_AP_HEADER].size; - if (mem->offset > ipa->mem_size || size > ipa->mem_size - mem->offset) { - dev_err(dev, "header table region out of range " - "(0x%04x + 0x%04x > 0x%04x)\n", - mem->offset, size, ipa->mem_size); + + if (size > size_max) { + dev_err(dev, "header table region size too large\n"); + dev_err(dev, " (0x%04x > 0x%08x)\n", size, size_max); + + return false; + } + if (size > ipa->mem_size || mem->offset > ipa->mem_size - size) { + dev_err(dev, "header table region out of range\n"); + dev_err(dev, " (0x%04x + 0x%04x > 0x%04x)\n", + mem->offset, size, ipa->mem_size); + return false; } -- cgit v1.2.3 From f658b90977d2e79822a558e48116e059a7e75dec Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Sat, 20 Mar 2021 21:40:08 +0100 Subject: r8169: fix DMA being used after buffer free if WoL is enabled IOMMU errors have been reported if WoL is enabled and interface is brought down. It turned out that the network chip triggers DMA transfers after the DMA buffers have been freed. For WoL to work we need to leave rx enabled, therefore simply stop the chip from being a DMA busmaster. Fixes: 567ca57faa62 ("r8169: add rtl8169_up") Tested-by: Paul Blazejowski Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169_main.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c index 7aad0ba53372..581a92fc3292 100644 --- a/drivers/net/ethernet/realtek/r8169_main.c +++ b/drivers/net/ethernet/realtek/r8169_main.c @@ -4646,6 +4646,9 @@ static void rtl8169_down(struct rtl8169_private *tp) rtl8169_update_counters(tp); + pci_clear_master(tp->pci_dev); + rtl_pci_commit(tp); + rtl8169_cleanup(tp, true); rtl_prepare_power_down(tp); @@ -4653,6 +4656,7 @@ static void rtl8169_down(struct rtl8169_private *tp) static void rtl8169_up(struct rtl8169_private *tp) { + pci_set_master(tp->pci_dev); phy_resume(tp->phydev); rtl8169_init_phy(tp); napi_enable(&tp->napi); @@ -5307,8 +5311,6 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) rtl_hw_reset(tp); - pci_set_master(pdev); - rc = rtl_alloc_irq(tp); if (rc < 0) { dev_err(&pdev->dev, "Can't allocate interrupt\n"); -- cgit v1.2.3 From 3d677f12ea3a2097a16ded570623567403dea959 Mon Sep 17 00:00:00 2001 From: Esteve Varela Colominas Date: Mon, 15 Mar 2021 20:58:24 +0100 Subject: platform/x86: thinkpad_acpi: Allow the FnLock LED to change state On many recent ThinkPad laptops, there's a new LED next to the ESC key, that indicates the FnLock status. When the Fn+ESC combo is pressed, FnLock is toggled, which causes the Media Key functionality to change, making it so that the media keys either perform their media key function, or function as an F-key by default. The Fn key can be used the access the alternate function at any time. With the current linux kernel, the LED doens't change state if you press the Fn+ESC key combo. However, the media key functionality *does* change. This is annoying, since the LED will stay on if it was on during bootup, and it makes it hard to keep track what the current state of the FnLock is. This patch calls an ACPI function, that gets the current media key state, when the Fn+ESC key combo is pressed. Through testing it was discovered that this function causes the LED to update correctly to reflect the current state when this function is called. The relevant ACPI calls are the following: \_SB_.PCI0.LPC0.EC0_.HKEY.GMKS: Get media key state, returns 0x603 if the FnLock mode is enabled, and 0x602 if it's disabled. \_SB_.PCI0.LPC0.EC0_.HKEY.SMKS: Set media key state, sending a 1 will enable FnLock mode, and a 0 will disable it. Relevant discussion: https://bugzilla.kernel.org/show_bug.cgi?id=207841 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1881015 Signed-off-by: Esteve Varela Colominas Link: https://lore.kernel.org/r/20210315195823.23212-1-esteve.varela@gmail.com Signed-off-by: Hans de Goede --- drivers/platform/x86/thinkpad_acpi.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index f7de90a47e28..8569c1d2a52c 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -4081,13 +4081,19 @@ static bool hotkey_notify_6xxx(const u32 hkey, case TP_HKEY_EV_KEY_NUMLOCK: case TP_HKEY_EV_KEY_FN: - case TP_HKEY_EV_KEY_FN_ESC: /* key press events, we just ignore them as long as the EC * is still reporting them in the normal keyboard stream */ *send_acpi_ev = false; *ignore_acpi_ev = true; return true; + case TP_HKEY_EV_KEY_FN_ESC: + /* Get the media key status to foce the status LED to update */ + acpi_evalf(hkey_handle, NULL, "GMKS", "v"); + *send_acpi_ev = false; + *ignore_acpi_ev = true; + return true; + case TP_HKEY_EV_TABLET_CHANGED: tpacpi_input_send_tabletsw(); hotkey_tablet_mode_notify_change(); -- cgit v1.2.3 From ec0e8fc416f70645608c146dcf90d264b2ad6e3c Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 21 Mar 2021 12:31:08 +0100 Subject: platform/x86: thinkpad_acpi: Disable DYTC CQL mode around switching to balanced mode Testing has shown that setting /sys/firmware/acpi/platform_profile to "balanced" when /sys/bus/platform/devices/thinkpad_acpi/dytc_lapmode reports 1, causes dytc_lapmode to get reset to 0 and then it becomes stuck at 0 for aprox. 30 minutes even if the laptop is used on a lap. Disabling CQL (when enabled) before issuing the DYTC_CMD_RESET to get back to balanced mode and re-enabling it afterwards again, like the code already does when switching to low-power / performance mode fixes this. Fixes: c3bfcd4c6762 ("platform/x86: thinkpad_acpi: Add platform profile support") Tested-by: Mark Pearson Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20210321113108.7069-1-hdegoede@redhat.com --- drivers/platform/x86/thinkpad_acpi.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 8569c1d2a52c..0d9e2ddbf904 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -10187,8 +10187,13 @@ static int dytc_profile_set(struct platform_profile_handler *pprof, return err; if (profile == PLATFORM_PROFILE_BALANCED) { - /* To get back to balanced mode we just issue a reset command */ - err = dytc_command(DYTC_CMD_RESET, &output); + /* + * To get back to balanced mode we need to issue a reset command. + * Note we still need to disable CQL mode before hand and re-enable + * it afterwards, otherwise dytc_lapmode gets reset to 0 and stays + * stuck at 0 for aprox. 30 minutes. + */ + err = dytc_cql_command(DYTC_CMD_RESET, &output); if (err) goto unlock; } else { -- cgit v1.2.3 From d939cd96b9df6dcde1605fab23bbd6307e11f930 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 21 Mar 2021 12:58:55 +0100 Subject: platform/x86: dell-wmi-sysman: Fix crash caused by calling kset_unregister twice On some system the WMI GUIDs used by dell-wmi-sysman are present but there are no enum type attributes, this causes init_bios_attributes() to return -ENODEV, after which sysman_init() does a "goto fail_create_group" and then calls release_attributes_data(). release_attributes_data() calls kset_unregister(wmi_priv.main_dir_kset); but before this commit it was missing a "wmi_priv.main_dir_kset = NULL;" statement; and after calling release_attributes_data() the sysman_init() error handling does this: if (wmi_priv.main_dir_kset) { kset_unregister(wmi_priv.main_dir_kset); wmi_priv.main_dir_kset = NULL; } Which causes a second kset_unregister(wmi_priv.main_dir_kset), leading to a double-free, which causes a crash. Add the missing "wmi_priv.main_dir_kset = NULL;" statement to release_attributes_data() to fix this double-free crash. Fixes: e8a60aa7404b ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems") Cc: Divya Bharathi Cc: Mario Limonciello Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20210321115901.35072-2-hdegoede@redhat.com --- drivers/platform/x86/dell/dell-wmi-sysman/sysman.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c b/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c index cb81010ba1a2..c1997db74cca 100644 --- a/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c +++ b/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c @@ -388,6 +388,7 @@ static void release_attributes_data(void) if (wmi_priv.main_dir_kset) { destroy_attribute_objs(wmi_priv.main_dir_kset); kset_unregister(wmi_priv.main_dir_kset); + wmi_priv.main_dir_kset = NULL; } mutex_unlock(&wmi_priv.mutex); -- cgit v1.2.3 From c59ab4cedab70a1a117a2dba3c48bb78e66c55ca Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 21 Mar 2021 12:58:56 +0100 Subject: platform/x86: dell-wmi-sysman: Fix possible NULL pointer deref on exit It is possible for release_attributes_data() to get called when the main_dir_kset has not been created yet, move the removal of the bios-reset sysfs attr to under a if (main_dir_kset) check to avoid a NULL pointer deref. Fixes: e8a60aa7404b ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems") Cc: Divya Bharathi Cc: Mario Limonciello Reported-by: Alexander Naumann Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20210321115901.35072-3-hdegoede@redhat.com --- drivers/platform/x86/dell/dell-wmi-sysman/sysman.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c b/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c index c1997db74cca..8b251b2c37a2 100644 --- a/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c +++ b/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c @@ -225,12 +225,6 @@ static int create_attributes_level_sysfs_files(void) return ret; } -static void release_reset_bios_data(void) -{ - sysfs_remove_file(&wmi_priv.main_dir_kset->kobj, &reset_bios.attr); - sysfs_remove_file(&wmi_priv.main_dir_kset->kobj, &pending_reboot.attr); -} - static ssize_t wmi_sysman_attr_show(struct kobject *kobj, struct attribute *attr, char *buf) { @@ -373,8 +367,6 @@ static void destroy_attribute_objs(struct kset *kset) */ static void release_attributes_data(void) { - release_reset_bios_data(); - mutex_lock(&wmi_priv.mutex); exit_enum_attributes(); exit_int_attributes(); @@ -386,12 +378,13 @@ static void release_attributes_data(void) wmi_priv.authentication_dir_kset = NULL; } if (wmi_priv.main_dir_kset) { + sysfs_remove_file(&wmi_priv.main_dir_kset->kobj, &reset_bios.attr); + sysfs_remove_file(&wmi_priv.main_dir_kset->kobj, &pending_reboot.attr); destroy_attribute_objs(wmi_priv.main_dir_kset); kset_unregister(wmi_priv.main_dir_kset); wmi_priv.main_dir_kset = NULL; } mutex_unlock(&wmi_priv.mutex); - } /** -- cgit v1.2.3 From 2d0c418c91d8c86a1b9fb254dda842ada9919513 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 21 Mar 2021 12:58:57 +0100 Subject: platform/x86: dell-wmi-sysman: Make it safe to call exit_foo_attributes() multiple times During some of the error-exit paths it is possible that release_attributes_data() will get called multiple times, which results in exit_foo_attributes() getting called multiple times. Make it safe to call exit_foo_attributes() multiple times, avoiding double-free()s in this case. Note that release_attributes_data() really should only be called once during error-exit paths. This will be fixed in a separate patch and it is good to have the exit_foo_attributes() functions modified this way regardless. Fixes: e8a60aa7404b ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems") Cc: Divya Bharathi Cc: Mario Limonciello Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20210321115901.35072-4-hdegoede@redhat.com --- drivers/platform/x86/dell/dell-wmi-sysman/enum-attributes.c | 3 +++ drivers/platform/x86/dell/dell-wmi-sysman/int-attributes.c | 3 +++ drivers/platform/x86/dell/dell-wmi-sysman/passobj-attributes.c | 3 +++ drivers/platform/x86/dell/dell-wmi-sysman/string-attributes.c | 3 +++ 4 files changed, 12 insertions(+) (limited to 'drivers') diff --git a/drivers/platform/x86/dell/dell-wmi-sysman/enum-attributes.c b/drivers/platform/x86/dell/dell-wmi-sysman/enum-attributes.c index 80f4b7785c6c..091e48c217ed 100644 --- a/drivers/platform/x86/dell/dell-wmi-sysman/enum-attributes.c +++ b/drivers/platform/x86/dell/dell-wmi-sysman/enum-attributes.c @@ -185,5 +185,8 @@ void exit_enum_attributes(void) sysfs_remove_group(wmi_priv.enumeration_data[instance_id].attr_name_kobj, &enumeration_attr_group); } + wmi_priv.enumeration_instances_count = 0; + kfree(wmi_priv.enumeration_data); + wmi_priv.enumeration_data = NULL; } diff --git a/drivers/platform/x86/dell/dell-wmi-sysman/int-attributes.c b/drivers/platform/x86/dell/dell-wmi-sysman/int-attributes.c index 75aedbb733be..8a49ba6e44f9 100644 --- a/drivers/platform/x86/dell/dell-wmi-sysman/int-attributes.c +++ b/drivers/platform/x86/dell/dell-wmi-sysman/int-attributes.c @@ -175,5 +175,8 @@ void exit_int_attributes(void) sysfs_remove_group(wmi_priv.integer_data[instance_id].attr_name_kobj, &integer_attr_group); } + wmi_priv.integer_instances_count = 0; + kfree(wmi_priv.integer_data); + wmi_priv.integer_data = NULL; } diff --git a/drivers/platform/x86/dell/dell-wmi-sysman/passobj-attributes.c b/drivers/platform/x86/dell/dell-wmi-sysman/passobj-attributes.c index 3abcd95477c0..834b3e82ad9f 100644 --- a/drivers/platform/x86/dell/dell-wmi-sysman/passobj-attributes.c +++ b/drivers/platform/x86/dell/dell-wmi-sysman/passobj-attributes.c @@ -183,5 +183,8 @@ void exit_po_attributes(void) sysfs_remove_group(wmi_priv.po_data[instance_id].attr_name_kobj, &po_attr_group); } + wmi_priv.po_instances_count = 0; + kfree(wmi_priv.po_data); + wmi_priv.po_data = NULL; } diff --git a/drivers/platform/x86/dell/dell-wmi-sysman/string-attributes.c b/drivers/platform/x86/dell/dell-wmi-sysman/string-attributes.c index ac75dce88a4c..552537852459 100644 --- a/drivers/platform/x86/dell/dell-wmi-sysman/string-attributes.c +++ b/drivers/platform/x86/dell/dell-wmi-sysman/string-attributes.c @@ -155,5 +155,8 @@ void exit_str_attributes(void) sysfs_remove_group(wmi_priv.str_data[instance_id].attr_name_kobj, &str_attr_group); } + wmi_priv.str_instances_count = 0; + kfree(wmi_priv.str_data); + wmi_priv.str_data = NULL; } -- cgit v1.2.3 From 59bbbeb9c22cc7c55965cd5ea8c16af7f16e61eb Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 21 Mar 2021 12:58:58 +0100 Subject: platform/x86: dell-wmi-sysman: Fix release_attributes_data() getting called twice on init_bios_attributes() failure All calls of init_bios_attributes() will result in a goto fail_create_group if they fail, which calls release_attributes_data(). So there is no need to call release_attributes_data() from init_bios_attributes() on failure itself. Fixes: e8a60aa7404b ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems") Cc: Divya Bharathi Cc: Mario Limonciello Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20210321115901.35072-5-hdegoede@redhat.com --- drivers/platform/x86/dell/dell-wmi-sysman/sysman.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c b/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c index 8b251b2c37a2..58dc4571f987 100644 --- a/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c +++ b/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c @@ -491,7 +491,6 @@ nextobj: err_attr_init: mutex_unlock(&wmi_priv.mutex); - release_attributes_data(); kfree(obj); return retval; } -- cgit v1.2.3 From 9c90cd869747e3492a9306dcd8123c17502ff1fc Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 21 Mar 2021 12:58:59 +0100 Subject: platform/x86: dell-wmi-sysman: Cleanup sysman_init() error-exit handling Cleanup sysman_init() error-exit handling: 1. There is no need for the fail_reset_bios and fail_authentication_kset eror-exit cases, these can be handled by release_attributes_data() 2. Rename all the labels from fail_what_failed, to err_what_to_cleanup this is the usual way to name these and avoids the need to rename them when extra steps are added. Fixes: e8a60aa7404b ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems") Cc: Divya Bharathi Cc: Mario Limonciello Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20210321115901.35072-6-hdegoede@redhat.com --- drivers/platform/x86/dell/dell-wmi-sysman/sysman.c | 45 ++++++++-------------- 1 file changed, 16 insertions(+), 29 deletions(-) (limited to 'drivers') diff --git a/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c b/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c index 58dc4571f987..99dc2f3bdf49 100644 --- a/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c +++ b/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c @@ -508,100 +508,87 @@ static int __init sysman_init(void) ret = init_bios_attr_set_interface(); if (ret || !wmi_priv.bios_attr_wdev) { pr_debug("failed to initialize set interface\n"); - goto fail_set_interface; + return ret; } ret = init_bios_attr_pass_interface(); if (ret || !wmi_priv.password_attr_wdev) { pr_debug("failed to initialize pass interface\n"); - goto fail_pass_interface; + goto err_exit_bios_attr_set_interface; } ret = class_register(&firmware_attributes_class); if (ret) - goto fail_class; + goto err_exit_bios_attr_pass_interface; wmi_priv.class_dev = device_create(&firmware_attributes_class, NULL, MKDEV(0, 0), NULL, "%s", DRIVER_NAME); if (IS_ERR(wmi_priv.class_dev)) { ret = PTR_ERR(wmi_priv.class_dev); - goto fail_classdev; + goto err_unregister_class; } wmi_priv.main_dir_kset = kset_create_and_add("attributes", NULL, &wmi_priv.class_dev->kobj); if (!wmi_priv.main_dir_kset) { ret = -ENOMEM; - goto fail_main_kset; + goto err_destroy_classdev; } wmi_priv.authentication_dir_kset = kset_create_and_add("authentication", NULL, &wmi_priv.class_dev->kobj); if (!wmi_priv.authentication_dir_kset) { ret = -ENOMEM; - goto fail_authentication_kset; + goto err_release_attributes_data; } ret = create_attributes_level_sysfs_files(); if (ret) { pr_debug("could not create reset BIOS attribute\n"); - goto fail_reset_bios; + goto err_release_attributes_data; } ret = init_bios_attributes(ENUM, DELL_WMI_BIOS_ENUMERATION_ATTRIBUTE_GUID); if (ret) { pr_debug("failed to populate enumeration type attributes\n"); - goto fail_create_group; + goto err_release_attributes_data; } ret = init_bios_attributes(INT, DELL_WMI_BIOS_INTEGER_ATTRIBUTE_GUID); if (ret) { pr_debug("failed to populate integer type attributes\n"); - goto fail_create_group; + goto err_release_attributes_data; } ret = init_bios_attributes(STR, DELL_WMI_BIOS_STRING_ATTRIBUTE_GUID); if (ret) { pr_debug("failed to populate string type attributes\n"); - goto fail_create_group; + goto err_release_attributes_data; } ret = init_bios_attributes(PO, DELL_WMI_BIOS_PASSOBJ_ATTRIBUTE_GUID); if (ret) { pr_debug("failed to populate pass object type attributes\n"); - goto fail_create_group; + goto err_release_attributes_data; } return 0; -fail_create_group: +err_release_attributes_data: release_attributes_data(); -fail_reset_bios: - if (wmi_priv.authentication_dir_kset) { - kset_unregister(wmi_priv.authentication_dir_kset); - wmi_priv.authentication_dir_kset = NULL; - } - -fail_authentication_kset: - if (wmi_priv.main_dir_kset) { - kset_unregister(wmi_priv.main_dir_kset); - wmi_priv.main_dir_kset = NULL; - } - -fail_main_kset: +err_destroy_classdev: device_destroy(&firmware_attributes_class, MKDEV(0, 0)); -fail_classdev: +err_unregister_class: class_unregister(&firmware_attributes_class); -fail_class: +err_exit_bios_attr_pass_interface: exit_bios_attr_pass_interface(); -fail_pass_interface: +err_exit_bios_attr_set_interface: exit_bios_attr_set_interface(); -fail_set_interface: return ret; } -- cgit v1.2.3 From 32418dd58c957f8fef25b97450d00275967604f1 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 21 Mar 2021 12:59:00 +0100 Subject: platform/x86: dell-wmi-sysman: Make sysman_init() return -ENODEV of the interfaces are not found When either the attributes or the password interface is not found, then unregister the 2 wmi drivers again and return -ENODEV from sysman_init(). Fixes: e8a60aa7404b ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems") Cc: Divya Bharathi Cc: Mario Limonciello Reported-by: Alexander Naumann Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20210321115901.35072-7-hdegoede@redhat.com --- drivers/platform/x86/dell/dell-wmi-sysman/sysman.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c b/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c index 99dc2f3bdf49..5dd9b29d939c 100644 --- a/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c +++ b/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c @@ -506,15 +506,17 @@ static int __init sysman_init(void) } ret = init_bios_attr_set_interface(); - if (ret || !wmi_priv.bios_attr_wdev) { - pr_debug("failed to initialize set interface\n"); + if (ret) return ret; - } ret = init_bios_attr_pass_interface(); - if (ret || !wmi_priv.password_attr_wdev) { - pr_debug("failed to initialize pass interface\n"); + if (ret) goto err_exit_bios_attr_set_interface; + + if (!wmi_priv.bios_attr_wdev || !wmi_priv.password_attr_wdev) { + pr_debug("failed to find set or pass interface\n"); + ret = -ENODEV; + goto err_exit_bios_attr_pass_interface; } ret = class_register(&firmware_attributes_class); -- cgit v1.2.3 From 35471138a9f7193482a2019e39643f575f8098dc Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 21 Mar 2021 12:59:01 +0100 Subject: platform/x86: dell-wmi-sysman: Cleanup create_attributes_level_sysfs_files() Cleanup create_attributes_level_sysfs_files(): 1. There is no need to call sysfs_remove_file() on error, sysman_init() will already call release_attributes_data() on failure which already does this. 2. There is no need for the pr_debug() calls sysfs_create_file() should never fail and if it does it will already complain about the problem itself. Fixes: e8a60aa7404b ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems") Cc: Divya Bharathi Cc: Mario Limonciello Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20210321115901.35072-8-hdegoede@redhat.com --- drivers/platform/x86/dell/dell-wmi-sysman/sysman.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c b/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c index 5dd9b29d939c..7410ccae650c 100644 --- a/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c +++ b/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c @@ -210,19 +210,17 @@ static struct kobj_attribute pending_reboot = __ATTR_RO(pending_reboot); */ static int create_attributes_level_sysfs_files(void) { - int ret = sysfs_create_file(&wmi_priv.main_dir_kset->kobj, &reset_bios.attr); + int ret; - if (ret) { - pr_debug("could not create reset_bios file\n"); + ret = sysfs_create_file(&wmi_priv.main_dir_kset->kobj, &reset_bios.attr); + if (ret) return ret; - } ret = sysfs_create_file(&wmi_priv.main_dir_kset->kobj, &pending_reboot.attr); - if (ret) { - pr_debug("could not create changing_pending_reboot file\n"); - sysfs_remove_file(&wmi_priv.main_dir_kset->kobj, &reset_bios.attr); - } - return ret; + if (ret) + return ret; + + return 0; } static ssize_t wmi_sysman_attr_show(struct kobject *kobj, struct attribute *attr, -- cgit v1.2.3 From 538d2dd0b9920334e6596977a664e9e7bac73703 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 21 Mar 2021 17:35:13 +0100 Subject: platform/x86: intel-vbtn: Stop reporting SW_DOCK events Stop reporting SW_DOCK events because this breaks suspend-on-lid-close. SW_DOCK should only be reported for docking stations, but all the DSDTs in my DSDT collection which use the intel-vbtn code, always seem to use this for 2-in-1s / convertibles and set SW_DOCK=1 when in laptop-mode (in tandem with setting SW_TABLET_MODE=0). This causes userspace to think the laptop is docked to a port-replicator and to disable suspend-on-lid-close, which is undesirable. Map the dock events to KEY_IGNORE to avoid this broken SW_DOCK reporting. Note this may theoretically cause us to stop reporting SW_DOCK on some device where the 0xCA and 0xCB intel-vbtn events are actually used for reporting docking to a classic docking-station / port-replicator but I'm not aware of any such devices. Also the most important thing is that we only report SW_DOCK when it reliably reports being docked to a classic docking-station without any false positives, which clearly is not the case here. If there is a chance of reporting false positives then it is better to not report SW_DOCK at all. Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20210321163513.72328-1-hdegoede@redhat.com --- drivers/platform/x86/intel-vbtn.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/platform/x86/intel-vbtn.c b/drivers/platform/x86/intel-vbtn.c index 8a8017f9ca91..3fdf4cbec9ad 100644 --- a/drivers/platform/x86/intel-vbtn.c +++ b/drivers/platform/x86/intel-vbtn.c @@ -48,8 +48,16 @@ static const struct key_entry intel_vbtn_keymap[] = { }; static const struct key_entry intel_vbtn_switchmap[] = { - { KE_SW, 0xCA, { .sw = { SW_DOCK, 1 } } }, /* Docked */ - { KE_SW, 0xCB, { .sw = { SW_DOCK, 0 } } }, /* Undocked */ + /* + * SW_DOCK should only be reported for docking stations, but DSDTs using the + * intel-vbtn code, always seem to use this for 2-in-1s / convertibles and set + * SW_DOCK=1 when in laptop-mode (in tandem with setting SW_TABLET_MODE=0). + * This causes userspace to think the laptop is docked to a port-replicator + * and to disable suspend-on-lid-close, which is undesirable. + * Map the dock events to KEY_IGNORE to avoid this broken SW_DOCK reporting. + */ + { KE_IGNORE, 0xCA, { .sw = { SW_DOCK, 1 } } }, /* Docked */ + { KE_IGNORE, 0xCB, { .sw = { SW_DOCK, 0 } } }, /* Undocked */ { KE_SW, 0xCC, { .sw = { SW_TABLET_MODE, 1 } } }, /* Tablet */ { KE_SW, 0xCD, { .sw = { SW_TABLET_MODE, 0 } } }, /* Laptop */ { KE_END } -- cgit v1.2.3 From 623f279c77811475ac8fd5635cc4e4451aa71291 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Sat, 20 Mar 2021 08:56:02 -0300 Subject: drm/msm: fix shutdown hook in case GPU components failed to bind If GPU components have failed to bind, shutdown callback would fail with the following backtrace. Add safeguard check to stop that oops from happening and allow the board to reboot. [ 66.617046] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 66.626066] Mem abort info: [ 66.628939] ESR = 0x96000006 [ 66.632088] EC = 0x25: DABT (current EL), IL = 32 bits [ 66.637542] SET = 0, FnV = 0 [ 66.640688] EA = 0, S1PTW = 0 [ 66.643924] Data abort info: [ 66.646889] ISV = 0, ISS = 0x00000006 [ 66.650832] CM = 0, WnR = 0 [ 66.653890] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000107f81000 [ 66.660505] [0000000000000000] pgd=0000000100bb2003, p4d=0000000100bb2003, pud=0000000100897003, pmd=0000000000000000 [ 66.671398] Internal error: Oops: 96000006 [#1] PREEMPT SMP [ 66.677115] Modules linked in: [ 66.680261] CPU: 6 PID: 352 Comm: reboot Not tainted 5.11.0-rc2-00309-g79e3faa756b2 #38 [ 66.688473] Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) [ 66.695347] pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--) [ 66.701507] pc : msm_atomic_commit_tail+0x78/0x4e0 [ 66.706437] lr : commit_tail+0xa4/0x184 [ 66.710381] sp : ffff8000108f3af0 [ 66.713791] x29: ffff8000108f3af0 x28: ffff418c44337000 [ 66.719242] x27: 0000000000000000 x26: ffff418c40a24490 [ 66.724693] x25: ffffd3a842a4f1a0 x24: 0000000000000008 [ 66.730146] x23: ffffd3a84313f030 x22: ffff418c444ce000 [ 66.735598] x21: ffff418c408a4980 x20: 0000000000000000 [ 66.741049] x19: 0000000000000000 x18: ffff800010710fbc [ 66.746500] x17: 000000000000000c x16: 0000000000000001 [ 66.751954] x15: 0000000000010008 x14: 0000000000000068 [ 66.757405] x13: 0000000000000001 x12: 0000000000000000 [ 66.762855] x11: 0000000000000001 x10: 00000000000009b0 [ 66.768306] x9 : ffffd3a843192000 x8 : ffff418c44337000 [ 66.773757] x7 : 0000000000000000 x6 : 00000000a401b34e [ 66.779210] x5 : 00ffffffffffffff x4 : 0000000000000000 [ 66.784660] x3 : 0000000000000000 x2 : ffff418c444ce000 [ 66.790111] x1 : ffffd3a841dce530 x0 : ffff418c444cf000 [ 66.795563] Call trace: [ 66.798075] msm_atomic_commit_tail+0x78/0x4e0 [ 66.802633] commit_tail+0xa4/0x184 [ 66.806217] drm_atomic_helper_commit+0x160/0x390 [ 66.811051] drm_atomic_commit+0x4c/0x60 [ 66.815082] drm_atomic_helper_disable_all+0x1f4/0x210 [ 66.820355] drm_atomic_helper_shutdown+0x80/0x130 [ 66.825276] msm_pdev_shutdown+0x14/0x20 [ 66.829303] platform_shutdown+0x28/0x40 [ 66.833330] device_shutdown+0x158/0x330 [ 66.837357] kernel_restart+0x40/0xa0 [ 66.841122] __do_sys_reboot+0x228/0x250 [ 66.845148] __arm64_sys_reboot+0x28/0x34 [ 66.849264] el0_svc_common.constprop.0+0x74/0x190 [ 66.854187] do_el0_svc+0x24/0x90 [ 66.857595] el0_svc+0x14/0x20 [ 66.860739] el0_sync_handler+0x1a4/0x1b0 [ 66.864858] el0_sync+0x174/0x180 [ 66.868269] Code: 1ac020a0 2a000273 eb02007f 54ffff01 (f9400285) [ 66.874525] ---[ end trace 20dedb2a3229fec8 ]--- Fixes: 9d5cbf5fe46e ("drm/msm: add shutdown support for display platform_driver") Signed-off-by: Dmitry Baryshkov Signed-off-by: Fabio Estevam Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/msm_drv.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c index 94525ac76d4e..fd2ac54caf9f 100644 --- a/drivers/gpu/drm/msm/msm_drv.c +++ b/drivers/gpu/drm/msm/msm_drv.c @@ -1311,6 +1311,10 @@ static int msm_pdev_remove(struct platform_device *pdev) static void msm_pdev_shutdown(struct platform_device *pdev) { struct drm_device *drm = platform_get_drvdata(pdev); + struct msm_drm_private *priv = drm ? drm->dev_private : NULL; + + if (!priv || !priv->kms) + return; drm_atomic_helper_shutdown(drm); } -- cgit v1.2.3 From a9748134ea4aad989e52a6a91479e0acfd306e5b Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 20 Mar 2021 08:56:03 -0300 Subject: drm/msm: Fix suspend/resume on i.MX5 When putting iMX5 into suspend, the following flow is observed: [ 70.023427] [] (msm_atomic_commit_tail) from [] (commit_tail+0x9c/0x18c) [ 70.031890] [] (commit_tail) from [] (drm_atomic_helper_commit+0x1a0/0x1d4) [ 70.040627] [] (drm_atomic_helper_commit) from [] (drm_atomic_helper_disable_all+0x1c4/0x1d4) [ 70.050913] [] (drm_atomic_helper_disable_all) from [] (drm_atomic_helper_suspend+0xb8/0x170) [ 70.061198] [] (drm_atomic_helper_suspend) from [] (drm_mode_config_helper_suspend+0x24/0x58) In the i.MX5 case, priv->kms is not populated (as i.MX5 does not use any of the Qualcomm display controllers), causing a NULL pointer dereference in msm_atomic_commit_tail(): [ 24.268964] 8<--- cut here --- [ 24.274602] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 24.283434] pgd = (ptrval) [ 24.286387] [00000000] *pgd=ca212831 [ 24.290788] Internal error: Oops: 17 [#1] SMP ARM [ 24.295609] Modules linked in: [ 24.298777] CPU: 0 PID: 197 Comm: init Not tainted 5.11.0-rc2-next-20210111 #333 [ 24.306276] Hardware name: Freescale i.MX53 (Device Tree Support) [ 24.312442] PC is at msm_atomic_commit_tail+0x54/0xb9c [ 24.317743] LR is at commit_tail+0xa4/0x1b0 Fix the problem by calling drm_mode_config_helper_suspend/resume() only when priv->kms is available. Fixes: ca8199f13498 ("drm/msm/dpu: ensure device suspend happens during PM sleep") Signed-off-by: Fabio Estevam Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/msm_drv.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c index fd2ac54caf9f..a5c6b8c23336 100644 --- a/drivers/gpu/drm/msm/msm_drv.c +++ b/drivers/gpu/drm/msm/msm_drv.c @@ -1072,6 +1072,10 @@ static int __maybe_unused msm_pm_resume(struct device *dev) static int __maybe_unused msm_pm_prepare(struct device *dev) { struct drm_device *ddev = dev_get_drvdata(dev); + struct msm_drm_private *priv = ddev ? ddev->dev_private : NULL; + + if (!priv || !priv->kms) + return 0; return drm_mode_config_helper_suspend(ddev); } @@ -1079,6 +1083,10 @@ static int __maybe_unused msm_pm_prepare(struct device *dev) static void __maybe_unused msm_pm_complete(struct device *dev) { struct drm_device *ddev = dev_get_drvdata(dev); + struct msm_drm_private *priv = ddev ? ddev->dev_private : NULL; + + if (!priv || !priv->kms) + return; drm_mode_config_helper_resume(ddev); } -- cgit v1.2.3 From af06b628a6bde8506bbad32dbf7cc641c0176ad7 Mon Sep 17 00:00:00 2001 From: Lang Cheng Date: Sat, 13 Mar 2021 10:30:11 +0800 Subject: RDMA/hns: Fix bug during CMDQ initialization When reloading driver, the head/tail pointer of CMDQ may be not at position 0. Then during initialization of CMDQ, if head is reset first, the firmware will start to handle CMDQ because the head is not equal to the tail. The driver can reset tail first since the firmware will be triggerred only by head. This bug is introduced by changing macros of head/tail register without changing the order of initialization. Fixes: 292b3352bd5b ("RDMA/hns: Adjust fields and variables about CMDQ tail/head") Link: https://lore.kernel.org/r/1615602611-7963-1-git-send-email-liweihang@huawei.com Signed-off-by: Lang Cheng Signed-off-by: Weihang Li Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c index c3934abeb260..ce26f97b2ca2 100644 --- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c +++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c @@ -1194,8 +1194,10 @@ static void hns_roce_cmq_init_regs(struct hns_roce_dev *hr_dev, bool ring_type) upper_32_bits(dma)); roce_write(hr_dev, ROCEE_TX_CMQ_DEPTH_REG, (u32)ring->desc_num >> HNS_ROCE_CMQ_DESC_NUM_S); - roce_write(hr_dev, ROCEE_TX_CMQ_HEAD_REG, 0); + + /* Make sure to write tail first and then head */ roce_write(hr_dev, ROCEE_TX_CMQ_TAIL_REG, 0); + roce_write(hr_dev, ROCEE_TX_CMQ_HEAD_REG, 0); } else { roce_write(hr_dev, ROCEE_RX_CMQ_BASEADDR_L_REG, (u32)dma); roce_write(hr_dev, ROCEE_RX_CMQ_BASEADDR_H_REG, -- cgit v1.2.3 From 5244f5e2d801259af877ee759e8c22364c607072 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 19 Mar 2021 15:47:31 +0100 Subject: PM: runtime: Defer suspending suppliers Because the PM-runtime status of the device is not updated in __rpm_callback(), attempts to suspend the suppliers of the given device triggered by the rpm_put_suppliers() call in there may cause a supplier to be suspended completely before the status of the consumer is updated to RPM_SUSPENDED, which is confusing. To avoid that (1) modify __rpm_callback() to only decrease the PM-runtime usage counter of each supplier and (2) make rpm_suspend() try to suspend the suppliers after changing the consumer's status to RPM_SUSPENDED, in analogy with the device's parent. Link: https://lore.kernel.org/linux-pm/CAPDyKFqm06KDw_p8WXsM4dijDbho4bb6T4k50UqqvR1_COsp8g@mail.gmail.com/ Fixes: 21d5c57b3726 ("PM / runtime: Use device links") Reported-by: elaine.zhang Diagnosed-by: Ulf Hansson Reviewed-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki --- drivers/base/power/runtime.c | 45 ++++++++++++++++++++++++++++++++++++++------ 1 file changed, 39 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index a46a7e30881b..d54e540067bf 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -305,7 +305,7 @@ static int rpm_get_suppliers(struct device *dev) return 0; } -static void rpm_put_suppliers(struct device *dev) +static void __rpm_put_suppliers(struct device *dev, bool try_to_suspend) { struct device_link *link; @@ -313,10 +313,30 @@ static void rpm_put_suppliers(struct device *dev) device_links_read_lock_held()) { while (refcount_dec_not_one(&link->rpm_active)) - pm_runtime_put(link->supplier); + pm_runtime_put_noidle(link->supplier); + + if (try_to_suspend) + pm_request_idle(link->supplier); } } +static void rpm_put_suppliers(struct device *dev) +{ + __rpm_put_suppliers(dev, true); +} + +static void rpm_suspend_suppliers(struct device *dev) +{ + struct device_link *link; + int idx = device_links_read_lock(); + + list_for_each_entry_rcu(link, &dev->links.suppliers, c_node, + device_links_read_lock_held()) + pm_request_idle(link->supplier); + + device_links_read_unlock(idx); +} + /** * __rpm_callback - Run a given runtime PM callback for a given device. * @cb: Runtime PM callback to run. @@ -344,8 +364,10 @@ static int __rpm_callback(int (*cb)(struct device *), struct device *dev) idx = device_links_read_lock(); retval = rpm_get_suppliers(dev); - if (retval) + if (retval) { + rpm_put_suppliers(dev); goto fail; + } device_links_read_unlock(idx); } @@ -368,9 +390,9 @@ static int __rpm_callback(int (*cb)(struct device *), struct device *dev) || (dev->power.runtime_status == RPM_RESUMING && retval))) { idx = device_links_read_lock(); - fail: - rpm_put_suppliers(dev); + __rpm_put_suppliers(dev, false); +fail: device_links_read_unlock(idx); } @@ -642,8 +664,11 @@ static int rpm_suspend(struct device *dev, int rpmflags) goto out; } + if (dev->power.irq_safe) + goto out; + /* Maybe the parent is now able to suspend. */ - if (parent && !parent->power.ignore_children && !dev->power.irq_safe) { + if (parent && !parent->power.ignore_children) { spin_unlock(&dev->power.lock); spin_lock(&parent->power.lock); @@ -652,6 +677,14 @@ static int rpm_suspend(struct device *dev, int rpmflags) spin_lock(&dev->power.lock); } + /* Maybe the suppliers are now able to suspend. */ + if (dev->power.links_count > 0) { + spin_unlock_irq(&dev->power.lock); + + rpm_suspend_suppliers(dev); + + spin_lock_irq(&dev->power.lock); + } out: trace_rpm_return_int_rcuidle(dev, _THIS_IP_, retval); -- cgit v1.2.3 From 9de82caad0282205d4c38a39456bce58e3219540 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 22 Mar 2021 12:44:58 +0100 Subject: dax: avoid -Wempty-body warnings gcc warns about an empty body in an else statement: drivers/dax/bus.c: In function 'do_id_store': drivers/dax/bus.c:94:48: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body] 94 | /* nothing to remove */; | ^ drivers/dax/bus.c:99:43: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body] 99 | /* dax_id already added */; | ^ In both of these cases, the 'else' exists only to have a place to add a comment, but that comment doesn't really explain that much either, so the easiest way to shut up that warning is to just remove the else. Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20210322114514.3490752-1-arnd@kernel.org Signed-off-by: Dan Williams --- drivers/dax/bus.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/dax/bus.c b/drivers/dax/bus.c index 452e85ae87a8..5aee26e1bbd6 100644 --- a/drivers/dax/bus.c +++ b/drivers/dax/bus.c @@ -90,13 +90,11 @@ static ssize_t do_id_store(struct device_driver *drv, const char *buf, list_add(&dax_id->list, &dax_drv->ids); } else rc = -ENOMEM; - } else - /* nothing to remove */; + } } else if (action == ID_REMOVE) { list_del(&dax_id->list); kfree(dax_id); - } else - /* dax_id already added */; + } mutex_unlock(&dax_bus_lock); if (rc < 0) -- cgit v1.2.3 From 160f99db943224e55906dd83880da1a704c6e6b9 Mon Sep 17 00:00:00 2001 From: JeongHyeon Lee Date: Thu, 11 Mar 2021 21:10:50 +0900 Subject: dm verity: fix DM_VERITY_OPTS_MAX value Three optional parameters must be accepted at once in a DM verity table, e.g.: (verity_error_handling_mode) (ignore_zero_block) (check_at_most_once) Fix this to be possible by incrementing DM_VERITY_OPTS_MAX. Signed-off-by: JeongHyeon Lee Fixes: 843f38d382b1 ("dm verity: add 'check_at_most_once' option to only validate hashes once") Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer --- drivers/md/dm-verity-target.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/dm-verity-target.c b/drivers/md/dm-verity-target.c index 6b8e5bdd8526..808a98ef624c 100644 --- a/drivers/md/dm-verity-target.c +++ b/drivers/md/dm-verity-target.c @@ -34,7 +34,7 @@ #define DM_VERITY_OPT_IGN_ZEROES "ignore_zero_blocks" #define DM_VERITY_OPT_AT_MOST_ONCE "check_at_most_once" -#define DM_VERITY_OPTS_MAX (2 + DM_VERITY_OPTS_FEC + \ +#define DM_VERITY_OPTS_MAX (3 + DM_VERITY_OPTS_FEC + \ DM_VERITY_ROOT_HASH_VERIFICATION_OPTS) static unsigned dm_verity_prefetch_cluster = DM_VERITY_DEFAULT_PREFETCH_SIZE; -- cgit v1.2.3 From 2d669ceb69c276f7637cf760287ca4187add082e Mon Sep 17 00:00:00 2001 From: Shin'ichiro Kawasaki Date: Tue, 16 Mar 2021 13:36:02 +0900 Subject: dm table: Fix zoned model check and zone sectors check Commit 24f6b6036c9e ("dm table: fix zoned iterate_devices based device capability checks") triggered dm table load failure when dm-zoned device is set up for zoned block devices and a regular device for cache. The commit inverted logic of two callback functions for iterate_devices: device_is_zoned_model() and device_matches_zone_sectors(). The logic of device_is_zoned_model() was inverted then all destination devices of all targets in dm table are required to have the expected zoned model. This is fine for dm-linear, dm-flakey and dm-crypt on zoned block devices since each target has only one destination device. However, this results in failure for dm-zoned with regular cache device since that target has both regular block device and zoned block devices. As for device_matches_zone_sectors(), the commit inverted the logic to require all zoned block devices in each target have the specified zone_sectors. This check also fails for regular block device which does not have zones. To avoid the check failures, fix the zone model check and the zone sectors check. For zone model check, introduce the new feature flag DM_TARGET_MIXED_ZONED_MODEL, and set it to dm-zoned target. When the target has this flag, allow it to have destination devices with any zoned model. For zone sectors check, skip the check if the destination device is not a zoned block device. Also add comments and improve an error message to clarify expectations to the two checks. Fixes: 24f6b6036c9e ("dm table: fix zoned iterate_devices based device capability checks") Signed-off-by: Shin'ichiro Kawasaki Signed-off-by: Damien Le Moal Signed-off-by: Mike Snitzer --- drivers/md/dm-table.c | 33 +++++++++++++++++++++++++-------- drivers/md/dm-zoned-target.c | 2 +- 2 files changed, 26 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index 95391f78b8d5..e5f0f1703c5d 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -1594,6 +1594,13 @@ static int device_not_zoned_model(struct dm_target *ti, struct dm_dev *dev, return blk_queue_zoned_model(q) != *zoned_model; } +/* + * Check the device zoned model based on the target feature flag. If the target + * has the DM_TARGET_ZONED_HM feature flag set, host-managed zoned devices are + * also accepted but all devices must have the same zoned model. If the target + * has the DM_TARGET_MIXED_ZONED_MODEL feature set, the devices can have any + * zoned model with all zoned devices having the same zone size. + */ static bool dm_table_supports_zoned_model(struct dm_table *t, enum blk_zoned_model zoned_model) { @@ -1603,13 +1610,15 @@ static bool dm_table_supports_zoned_model(struct dm_table *t, for (i = 0; i < dm_table_get_num_targets(t); i++) { ti = dm_table_get_target(t, i); - if (zoned_model == BLK_ZONED_HM && - !dm_target_supports_zoned_hm(ti->type)) - return false; - - if (!ti->type->iterate_devices || - ti->type->iterate_devices(ti, device_not_zoned_model, &zoned_model)) - return false; + if (dm_target_supports_zoned_hm(ti->type)) { + if (!ti->type->iterate_devices || + ti->type->iterate_devices(ti, device_not_zoned_model, + &zoned_model)) + return false; + } else if (!dm_target_supports_mixed_zoned_model(ti->type)) { + if (zoned_model == BLK_ZONED_HM) + return false; + } } return true; @@ -1621,9 +1630,17 @@ static int device_not_matches_zone_sectors(struct dm_target *ti, struct dm_dev * struct request_queue *q = bdev_get_queue(dev->bdev); unsigned int *zone_sectors = data; + if (!blk_queue_is_zoned(q)) + return 0; + return blk_queue_zone_sectors(q) != *zone_sectors; } +/* + * Check consistency of zoned model and zone sectors across all targets. For + * zone sectors, if the destination device is a zoned block device, it shall + * have the specified zone_sectors. + */ static int validate_hardware_zoned_model(struct dm_table *table, enum blk_zoned_model zoned_model, unsigned int zone_sectors) @@ -1642,7 +1659,7 @@ static int validate_hardware_zoned_model(struct dm_table *table, return -EINVAL; if (dm_table_any_dev_attr(table, device_not_matches_zone_sectors, &zone_sectors)) { - DMERR("%s: zone sectors is not consistent across all devices", + DMERR("%s: zone sectors is not consistent across all zoned devices", dm_device_name(table->md)); return -EINVAL; } diff --git a/drivers/md/dm-zoned-target.c b/drivers/md/dm-zoned-target.c index 697f9de37355..7e88df64d197 100644 --- a/drivers/md/dm-zoned-target.c +++ b/drivers/md/dm-zoned-target.c @@ -1143,7 +1143,7 @@ static int dmz_message(struct dm_target *ti, unsigned int argc, char **argv, static struct target_type dmz_type = { .name = "zoned", .version = {2, 0, 0}, - .features = DM_TARGET_SINGLETON | DM_TARGET_ZONED_HM, + .features = DM_TARGET_SINGLETON | DM_TARGET_MIXED_ZONED_MODEL, .module = THIS_MODULE, .ctr = dmz_ctr, .dtr = dmz_dtr, -- cgit v1.2.3 From 5424a0b867e65f1ecf34ffe88d091a4fcbb35bc1 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Mon, 22 Mar 2021 10:13:54 -0400 Subject: dm: don't report "detected capacity change" on device creation When a DM device is first created it doesn't yet have an established capacity, therefore the use of set_capacity_and_notify() should be conditional given the potential for needless pr_info "detected capacity change" noise even if capacity is 0. One could argue that the pr_info() in set_capacity_and_notify() is misplaced, but that position is not held uniformly. Signed-off-by: Mikulas Patocka Fixes: f64d9b2eacb9 ("dm: use set_capacity_and_notify") Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer --- drivers/md/dm.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 50b693d776d6..3f3be9408afa 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -2036,7 +2036,10 @@ static struct dm_table *__bind(struct mapped_device *md, struct dm_table *t, if (size != dm_get_size(md)) memset(&md->geometry, 0, sizeof(md->geometry)); - set_capacity_and_notify(md->disk, size); + if (!get_capacity(md->disk)) + set_capacity(md->disk, size); + else + set_capacity_and_notify(md->disk, size); dm_table_event_callback(t, event_callback, md); -- cgit v1.2.3 From eb50aaf960e3bedfef79063411ffd670da94b84b Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 22 Mar 2021 18:31:00 +0200 Subject: ACPI: scan: Use unique number for instance_no The decrementation of acpi_device_bus_id->instance_no in acpi_device_del() is incorrect, because it may cause a duplicate instance number to be allocated next time a device with the same acpi_device_bus_id is added. Replace above mentioned approach by using IDA framework. While at it, define the instance range to be [0, 4096). Fixes: e49bd2dd5a50 ("ACPI: use PNPID:instance_no as bus_id of ACPI device") Fixes: ca9dc8d42b30 ("ACPI / scan: Fix acpi_bus_id_list bookkeeping") Signed-off-by: Andy Shevchenko Cc: 4.10+ # 4.10+ Signed-off-by: Rafael J. Wysocki --- drivers/acpi/internal.h | 6 +++++- drivers/acpi/scan.c | 33 ++++++++++++++++++++++++++++----- 2 files changed, 33 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h index e6a5d997241c..cb8f70842249 100644 --- a/drivers/acpi/internal.h +++ b/drivers/acpi/internal.h @@ -9,6 +9,8 @@ #ifndef _ACPI_INTERNAL_H_ #define _ACPI_INTERNAL_H_ +#include + #define PREFIX "ACPI: " int early_acpi_osi_init(void); @@ -96,9 +98,11 @@ void acpi_scan_table_handler(u32 event, void *table, void *context); extern struct list_head acpi_bus_id_list; +#define ACPI_MAX_DEVICE_INSTANCES 4096 + struct acpi_device_bus_id { const char *bus_id; - unsigned int instance_no; + struct ida instance_ida; struct list_head node; }; diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index a184529d8fa4..84bb7c1929f1 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -479,9 +479,8 @@ static void acpi_device_del(struct acpi_device *device) list_for_each_entry(acpi_device_bus_id, &acpi_bus_id_list, node) if (!strcmp(acpi_device_bus_id->bus_id, acpi_device_hid(device))) { - if (acpi_device_bus_id->instance_no > 0) - acpi_device_bus_id->instance_no--; - else { + ida_simple_remove(&acpi_device_bus_id->instance_ida, device->pnp.instance_no); + if (ida_is_empty(&acpi_device_bus_id->instance_ida)) { list_del(&acpi_device_bus_id->node); kfree_const(acpi_device_bus_id->bus_id); kfree(acpi_device_bus_id); @@ -631,6 +630,21 @@ static struct acpi_device_bus_id *acpi_device_bus_id_match(const char *dev_id) return NULL; } +static int acpi_device_set_name(struct acpi_device *device, + struct acpi_device_bus_id *acpi_device_bus_id) +{ + struct ida *instance_ida = &acpi_device_bus_id->instance_ida; + int result; + + result = ida_simple_get(instance_ida, 0, ACPI_MAX_DEVICE_INSTANCES, GFP_KERNEL); + if (result < 0) + return result; + + device->pnp.instance_no = result; + dev_set_name(&device->dev, "%s:%02x", acpi_device_bus_id->bus_id, result); + return 0; +} + int acpi_device_add(struct acpi_device *device, void (*release)(struct device *)) { @@ -665,7 +679,9 @@ int acpi_device_add(struct acpi_device *device, acpi_device_bus_id = acpi_device_bus_id_match(acpi_device_hid(device)); if (acpi_device_bus_id) { - acpi_device_bus_id->instance_no++; + result = acpi_device_set_name(device, acpi_device_bus_id); + if (result) + goto err_unlock; } else { acpi_device_bus_id = kzalloc(sizeof(*acpi_device_bus_id), GFP_KERNEL); @@ -681,9 +697,16 @@ int acpi_device_add(struct acpi_device *device, goto err_unlock; } + ida_init(&acpi_device_bus_id->instance_ida); + + result = acpi_device_set_name(device, acpi_device_bus_id); + if (result) { + kfree(acpi_device_bus_id); + goto err_unlock; + } + list_add_tail(&acpi_device_bus_id->node, &acpi_bus_id_list); } - dev_set_name(&device->dev, "%s:%02x", acpi_device_bus_id->bus_id, acpi_device_bus_id->instance_no); if (device->parent) list_add_tail(&device->node, &device->parent->children); -- cgit v1.2.3 From 9aa26019c1a60013ea866d460de6392acb1712ee Mon Sep 17 00:00:00 2001 From: Prike Liang Date: Tue, 9 Mar 2021 09:34:00 +0800 Subject: drm/amdgpu: fix the hibernation suspend with s0ix During system hibernation suspend still need un-gate gfx CG/PG firstly to handle HW status check before HW resource destory. Signed-off-by: Prike Liang Acked-by: Alex Deucher Acked-by: Huang Rui Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index 6447cd6ca5a8..7ecc6e4b8456 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -2678,7 +2678,7 @@ static int amdgpu_device_ip_suspend_phase1(struct amdgpu_device *adev) { int i, r; - if (adev->in_poweroff_reboot_com || + if (adev->in_poweroff_reboot_com || adev->in_hibernate || !amdgpu_acpi_is_s0ix_supported(adev) || amdgpu_in_reset(adev)) { amdgpu_device_set_pg_state(adev, AMD_PG_STATE_UNGATE); amdgpu_device_set_cg_state(adev, AMD_CG_STATE_UNGATE); @@ -3742,7 +3742,11 @@ int amdgpu_device_suspend(struct drm_device *dev, bool fbcon) amdgpu_fence_driver_suspend(adev); - if (adev->in_poweroff_reboot_com || + /* + * TODO: Need figure out the each GNB IP idle off dependency and then + * improve the AMDGPU suspend/resume sequence for system-wide Sx entry/exit. + */ + if (adev->in_poweroff_reboot_com || adev->in_hibernate || !amdgpu_acpi_is_s0ix_supported(adev) || amdgpu_in_reset(adev)) r = amdgpu_device_ip_suspend_phase2(adev); else -- cgit v1.2.3 From 8914089a205be1042f99d49d2087663efc6fafa3 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 12 Mar 2021 15:22:36 -0500 Subject: drm/amdgpu: rework S3/S4/S0ix state handling Set flags at the top level pmops callbacks to track state. This cleans up the current set of flags and properly handles S4 on S0ix capable systems. Reviewed-by: Evan Quan Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu.h | 10 +++------- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 12 +++--------- drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 30 ++++++++++++++++++------------ drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c | 2 +- 4 files changed, 25 insertions(+), 29 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h index 49267eb64302..29885febc0b0 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h @@ -1007,13 +1007,9 @@ struct amdgpu_device { /* s3/s4 mask */ bool in_suspend; - bool in_hibernate; - - /* - * The combination flag in_poweroff_reboot_com used to identify the poweroff - * and reboot opt in the s0i3 system-wide suspend. - */ - bool in_poweroff_reboot_com; + bool in_s3; + bool in_s4; + bool in_s0ix; atomic_t in_gpu_reset; enum pp_mp1_state mp1_state; diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index 7ecc6e4b8456..53e60c4ef0d3 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -2678,8 +2678,7 @@ static int amdgpu_device_ip_suspend_phase1(struct amdgpu_device *adev) { int i, r; - if (adev->in_poweroff_reboot_com || adev->in_hibernate || - !amdgpu_acpi_is_s0ix_supported(adev) || amdgpu_in_reset(adev)) { + if (!adev->in_s0ix || amdgpu_in_reset(adev)) { amdgpu_device_set_pg_state(adev, AMD_PG_STATE_UNGATE); amdgpu_device_set_cg_state(adev, AMD_CG_STATE_UNGATE); } @@ -3742,12 +3741,7 @@ int amdgpu_device_suspend(struct drm_device *dev, bool fbcon) amdgpu_fence_driver_suspend(adev); - /* - * TODO: Need figure out the each GNB IP idle off dependency and then - * improve the AMDGPU suspend/resume sequence for system-wide Sx entry/exit. - */ - if (adev->in_poweroff_reboot_com || adev->in_hibernate || - !amdgpu_acpi_is_s0ix_supported(adev) || amdgpu_in_reset(adev)) + if (!adev->in_s0ix || amdgpu_in_reset(adev)) r = amdgpu_device_ip_suspend_phase2(adev); else amdgpu_gfx_state_change_set(adev, sGpuChangeState_D3Entry); @@ -3781,7 +3775,7 @@ int amdgpu_device_resume(struct drm_device *dev, bool fbcon) if (dev->switch_power_state == DRM_SWITCH_POWER_OFF) return 0; - if (amdgpu_acpi_is_s0ix_supported(adev)) + if (adev->in_s0ix) amdgpu_gfx_state_change_set(adev, sGpuChangeState_D0Entry); /* post card */ diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c index b26e2fd1c538..1b145a29803c 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c @@ -1274,24 +1274,35 @@ amdgpu_pci_shutdown(struct pci_dev *pdev) */ if (!amdgpu_passthrough(adev)) adev->mp1_state = PP_MP1_STATE_UNLOAD; - adev->in_poweroff_reboot_com = true; amdgpu_device_ip_suspend(adev); - adev->in_poweroff_reboot_com = false; adev->mp1_state = PP_MP1_STATE_NONE; } static int amdgpu_pmops_suspend(struct device *dev) { struct drm_device *drm_dev = dev_get_drvdata(dev); + struct amdgpu_device *adev = drm_to_adev(drm_dev); + int r; - return amdgpu_device_suspend(drm_dev, true); + if (amdgpu_acpi_is_s0ix_supported(adev)) + adev->in_s0ix = true; + adev->in_s3 = true; + r = amdgpu_device_suspend(drm_dev, true); + adev->in_s3 = false; + + return r; } static int amdgpu_pmops_resume(struct device *dev) { struct drm_device *drm_dev = dev_get_drvdata(dev); + struct amdgpu_device *adev = drm_to_adev(drm_dev); + int r; - return amdgpu_device_resume(drm_dev, true); + r = amdgpu_device_resume(drm_dev, true); + if (amdgpu_acpi_is_s0ix_supported(adev)) + adev->in_s0ix = false; + return r; } static int amdgpu_pmops_freeze(struct device *dev) @@ -1300,9 +1311,9 @@ static int amdgpu_pmops_freeze(struct device *dev) struct amdgpu_device *adev = drm_to_adev(drm_dev); int r; - adev->in_hibernate = true; + adev->in_s4 = true; r = amdgpu_device_suspend(drm_dev, true); - adev->in_hibernate = false; + adev->in_s4 = false; if (r) return r; return amdgpu_asic_reset(adev); @@ -1318,13 +1329,8 @@ static int amdgpu_pmops_thaw(struct device *dev) static int amdgpu_pmops_poweroff(struct device *dev) { struct drm_device *drm_dev = dev_get_drvdata(dev); - struct amdgpu_device *adev = drm_to_adev(drm_dev); - int r; - adev->in_poweroff_reboot_com = true; - r = amdgpu_device_suspend(drm_dev, true); - adev->in_poweroff_reboot_com = false; - return r; + return amdgpu_device_suspend(drm_dev, true); } static int amdgpu_pmops_restore(struct device *dev) diff --git a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c index d143ef1b460b..24b19ba7f784 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c +++ b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c @@ -1294,7 +1294,7 @@ static int smu_disable_dpms(struct smu_context *smu) bool use_baco = !smu->is_apu && ((amdgpu_in_reset(adev) && (amdgpu_asic_reset_method(adev) == AMD_RESET_METHOD_BACO)) || - ((adev->in_runpm || adev->in_hibernate) && amdgpu_asic_supports_baco(adev))); + ((adev->in_runpm || adev->in_s4) && amdgpu_asic_supports_baco(adev))); /* * For custom pptable uploading, skip the DPM features -- cgit v1.2.3 From e13d002bbf1d211cfe831ad2b2ae229a351eb196 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 9 Mar 2021 23:20:46 -0500 Subject: drm/amdgpu: don't evict vram on APUs for suspend to ram (v4) Vram is system memory, so no need to evict. v2: use PM_EVENT messages v3: use correct dev v4: use driver flags Reviewed-by: Evan Quan Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_object.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c index 4b29b8205442..072050429a2f 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c @@ -1028,13 +1028,10 @@ int amdgpu_bo_evict_vram(struct amdgpu_device *adev) { struct ttm_resource_manager *man; - /* late 2.6.33 fix IGP hibernate - we need pm ops to do this correct */ -#ifndef CONFIG_HIBERNATION - if (adev->flags & AMD_IS_APU) { - /* Useless to evict on IGP chips */ + if (adev->in_s3 && (adev->flags & AMD_IS_APU)) { + /* No need to evict vram on APUs for suspend to ram */ return 0; } -#endif man = ttm_manager_type(&adev->mman.bdev, TTM_PL_VRAM); return ttm_resource_manager_evict_all(&adev->mman.bdev, man); -- cgit v1.2.3 From ca8ee26d616b5e1818a0c69285d8f01feec35af9 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 19 Mar 2021 16:34:45 -0400 Subject: drm/amdgpu: clean up non-DC suspend/resume handling Move the non-DC specific code into the DCE IP blocks similar to how we handle DC. This cleans up the common suspend and resume pathes. Reviewed-by: Evan Quan Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 86 +--------------------------- drivers/gpu/drm/amd/amdgpu/amdgpu_display.c | 89 +++++++++++++++++++++++++++++ drivers/gpu/drm/amd/amdgpu/amdgpu_display.h | 3 + drivers/gpu/drm/amd/amdgpu/dce_v10_0.c | 9 ++- drivers/gpu/drm/amd/amdgpu/dce_v11_0.c | 9 ++- drivers/gpu/drm/amd/amdgpu/dce_v6_0.c | 8 ++- drivers/gpu/drm/amd/amdgpu/dce_v8_0.c | 9 ++- drivers/gpu/drm/amd/amdgpu/dce_virtual.c | 15 ++++- 8 files changed, 139 insertions(+), 89 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index 53e60c4ef0d3..d1028933f41b 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -3672,14 +3672,9 @@ void amdgpu_device_fini(struct amdgpu_device *adev) */ int amdgpu_device_suspend(struct drm_device *dev, bool fbcon) { - struct amdgpu_device *adev; - struct drm_crtc *crtc; - struct drm_connector *connector; - struct drm_connector_list_iter iter; + struct amdgpu_device *adev = drm_to_adev(dev); int r; - adev = drm_to_adev(dev); - if (dev->switch_power_state == DRM_SWITCH_POWER_OFF) return 0; @@ -3691,45 +3686,6 @@ int amdgpu_device_suspend(struct drm_device *dev, bool fbcon) cancel_delayed_work_sync(&adev->delayed_init_work); - if (!amdgpu_device_has_dc_support(adev)) { - /* turn off display hw */ - drm_modeset_lock_all(dev); - drm_connector_list_iter_begin(dev, &iter); - drm_for_each_connector_iter(connector, &iter) - drm_helper_connector_dpms(connector, - DRM_MODE_DPMS_OFF); - drm_connector_list_iter_end(&iter); - drm_modeset_unlock_all(dev); - /* unpin the front buffers and cursors */ - list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { - struct amdgpu_crtc *amdgpu_crtc = to_amdgpu_crtc(crtc); - struct drm_framebuffer *fb = crtc->primary->fb; - struct amdgpu_bo *robj; - - if (amdgpu_crtc->cursor_bo && !adev->enable_virtual_display) { - struct amdgpu_bo *aobj = gem_to_amdgpu_bo(amdgpu_crtc->cursor_bo); - r = amdgpu_bo_reserve(aobj, true); - if (r == 0) { - amdgpu_bo_unpin(aobj); - amdgpu_bo_unreserve(aobj); - } - } - - if (fb == NULL || fb->obj[0] == NULL) { - continue; - } - robj = gem_to_amdgpu_bo(fb->obj[0]); - /* don't unpin kernel fb objects */ - if (!amdgpu_fbdev_robj_is_fb(adev, robj)) { - r = amdgpu_bo_reserve(robj, true); - if (r == 0) { - amdgpu_bo_unpin(robj); - amdgpu_bo_unreserve(robj); - } - } - } - } - amdgpu_ras_suspend(adev); r = amdgpu_device_ip_suspend_phase1(adev); @@ -3766,10 +3722,7 @@ int amdgpu_device_suspend(struct drm_device *dev, bool fbcon) */ int amdgpu_device_resume(struct drm_device *dev, bool fbcon) { - struct drm_connector *connector; - struct drm_connector_list_iter iter; struct amdgpu_device *adev = drm_to_adev(dev); - struct drm_crtc *crtc; int r = 0; if (dev->switch_power_state == DRM_SWITCH_POWER_OFF) @@ -3800,24 +3753,6 @@ int amdgpu_device_resume(struct drm_device *dev, bool fbcon) queue_delayed_work(system_wq, &adev->delayed_init_work, msecs_to_jiffies(AMDGPU_RESUME_MS)); - if (!amdgpu_device_has_dc_support(adev)) { - /* pin cursors */ - list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { - struct amdgpu_crtc *amdgpu_crtc = to_amdgpu_crtc(crtc); - - if (amdgpu_crtc->cursor_bo && !adev->enable_virtual_display) { - struct amdgpu_bo *aobj = gem_to_amdgpu_bo(amdgpu_crtc->cursor_bo); - r = amdgpu_bo_reserve(aobj, true); - if (r == 0) { - r = amdgpu_bo_pin(aobj, AMDGPU_GEM_DOMAIN_VRAM); - if (r != 0) - dev_err(adev->dev, "Failed to pin cursor BO (%d)\n", r); - amdgpu_crtc->cursor_addr = amdgpu_bo_gpu_offset(aobj); - amdgpu_bo_unreserve(aobj); - } - } - } - } r = amdgpu_amdkfd_resume(adev, adev->in_runpm); if (r) return r; @@ -3825,25 +3760,8 @@ int amdgpu_device_resume(struct drm_device *dev, bool fbcon) /* Make sure IB tests flushed */ flush_delayed_work(&adev->delayed_init_work); - /* blat the mode back in */ - if (fbcon) { - if (!amdgpu_device_has_dc_support(adev)) { - /* pre DCE11 */ - drm_helper_resume_force_mode(dev); - - /* turn on display hw */ - drm_modeset_lock_all(dev); - - drm_connector_list_iter_begin(dev, &iter); - drm_for_each_connector_iter(connector, &iter) - drm_helper_connector_dpms(connector, - DRM_MODE_DPMS_ON); - drm_connector_list_iter_end(&iter); - - drm_modeset_unlock_all(dev); - } + if (fbcon) amdgpu_fbdev_set_suspend(adev, 0); - } drm_kms_helper_poll_enable(dev); diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c index 48cb33e5b382..f753e04fee99 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c @@ -1310,3 +1310,92 @@ bool amdgpu_crtc_get_scanout_position(struct drm_crtc *crtc, return amdgpu_display_get_crtc_scanoutpos(dev, pipe, 0, vpos, hpos, stime, etime, mode); } + +int amdgpu_display_suspend_helper(struct amdgpu_device *adev) +{ + struct drm_device *dev = adev_to_drm(adev); + struct drm_crtc *crtc; + struct drm_connector *connector; + struct drm_connector_list_iter iter; + int r; + + /* turn off display hw */ + drm_modeset_lock_all(dev); + drm_connector_list_iter_begin(dev, &iter); + drm_for_each_connector_iter(connector, &iter) + drm_helper_connector_dpms(connector, + DRM_MODE_DPMS_OFF); + drm_connector_list_iter_end(&iter); + drm_modeset_unlock_all(dev); + /* unpin the front buffers and cursors */ + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + struct amdgpu_crtc *amdgpu_crtc = to_amdgpu_crtc(crtc); + struct drm_framebuffer *fb = crtc->primary->fb; + struct amdgpu_bo *robj; + + if (amdgpu_crtc->cursor_bo && !adev->enable_virtual_display) { + struct amdgpu_bo *aobj = gem_to_amdgpu_bo(amdgpu_crtc->cursor_bo); + r = amdgpu_bo_reserve(aobj, true); + if (r == 0) { + amdgpu_bo_unpin(aobj); + amdgpu_bo_unreserve(aobj); + } + } + + if (fb == NULL || fb->obj[0] == NULL) { + continue; + } + robj = gem_to_amdgpu_bo(fb->obj[0]); + /* don't unpin kernel fb objects */ + if (!amdgpu_fbdev_robj_is_fb(adev, robj)) { + r = amdgpu_bo_reserve(robj, true); + if (r == 0) { + amdgpu_bo_unpin(robj); + amdgpu_bo_unreserve(robj); + } + } + } + return r; +} + +int amdgpu_display_resume_helper(struct amdgpu_device *adev) +{ + struct drm_device *dev = adev_to_drm(adev); + struct drm_connector *connector; + struct drm_connector_list_iter iter; + struct drm_crtc *crtc; + int r; + + /* pin cursors */ + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + struct amdgpu_crtc *amdgpu_crtc = to_amdgpu_crtc(crtc); + + if (amdgpu_crtc->cursor_bo && !adev->enable_virtual_display) { + struct amdgpu_bo *aobj = gem_to_amdgpu_bo(amdgpu_crtc->cursor_bo); + r = amdgpu_bo_reserve(aobj, true); + if (r == 0) { + r = amdgpu_bo_pin(aobj, AMDGPU_GEM_DOMAIN_VRAM); + if (r != 0) + dev_err(adev->dev, "Failed to pin cursor BO (%d)\n", r); + amdgpu_crtc->cursor_addr = amdgpu_bo_gpu_offset(aobj); + amdgpu_bo_unreserve(aobj); + } + } + } + + drm_helper_resume_force_mode(dev); + + /* turn on display hw */ + drm_modeset_lock_all(dev); + + drm_connector_list_iter_begin(dev, &iter); + drm_for_each_connector_iter(connector, &iter) + drm_helper_connector_dpms(connector, + DRM_MODE_DPMS_ON); + drm_connector_list_iter_end(&iter); + + drm_modeset_unlock_all(dev); + + return 0; +} + diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.h index dc7b7d116549..7b6d83e2b13c 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.h @@ -47,4 +47,7 @@ amdgpu_display_user_framebuffer_create(struct drm_device *dev, const struct drm_format_info * amdgpu_lookup_format_info(u32 format, uint64_t modifier); +int amdgpu_display_suspend_helper(struct amdgpu_device *adev); +int amdgpu_display_resume_helper(struct amdgpu_device *adev); + #endif diff --git a/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c b/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c index 7944781e1086..19abb740a169 100644 --- a/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c +++ b/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c @@ -2897,6 +2897,11 @@ static int dce_v10_0_hw_fini(void *handle) static int dce_v10_0_suspend(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; + int r; + + r = amdgpu_display_suspend_helper(adev); + if (r) + return r; adev->mode_info.bl_level = amdgpu_atombios_encoder_get_backlight_level_from_reg(adev); @@ -2921,8 +2926,10 @@ static int dce_v10_0_resume(void *handle) amdgpu_display_backlight_set_level(adev, adev->mode_info.bl_encoder, bl_level); } + if (ret) + return ret; - return ret; + return amdgpu_display_resume_helper(adev); } static bool dce_v10_0_is_idle(void *handle) diff --git a/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c b/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c index 1b6ff0470011..320ec35bfd37 100644 --- a/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c +++ b/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c @@ -3027,6 +3027,11 @@ static int dce_v11_0_hw_fini(void *handle) static int dce_v11_0_suspend(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; + int r; + + r = amdgpu_display_suspend_helper(adev); + if (r) + return r; adev->mode_info.bl_level = amdgpu_atombios_encoder_get_backlight_level_from_reg(adev); @@ -3051,8 +3056,10 @@ static int dce_v11_0_resume(void *handle) amdgpu_display_backlight_set_level(adev, adev->mode_info.bl_encoder, bl_level); } + if (ret) + return ret; - return ret; + return amdgpu_display_resume_helper(adev); } static bool dce_v11_0_is_idle(void *handle) diff --git a/drivers/gpu/drm/amd/amdgpu/dce_v6_0.c b/drivers/gpu/drm/amd/amdgpu/dce_v6_0.c index 83a88385b762..13322000ebd6 100644 --- a/drivers/gpu/drm/amd/amdgpu/dce_v6_0.c +++ b/drivers/gpu/drm/amd/amdgpu/dce_v6_0.c @@ -2770,7 +2770,11 @@ static int dce_v6_0_hw_fini(void *handle) static int dce_v6_0_suspend(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; + int r; + r = amdgpu_display_suspend_helper(adev); + if (r) + return r; adev->mode_info.bl_level = amdgpu_atombios_encoder_get_backlight_level_from_reg(adev); @@ -2794,8 +2798,10 @@ static int dce_v6_0_resume(void *handle) amdgpu_display_backlight_set_level(adev, adev->mode_info.bl_encoder, bl_level); } + if (ret) + return ret; - return ret; + return amdgpu_display_resume_helper(adev); } static bool dce_v6_0_is_idle(void *handle) diff --git a/drivers/gpu/drm/amd/amdgpu/dce_v8_0.c b/drivers/gpu/drm/amd/amdgpu/dce_v8_0.c index 224b30214427..04ebf02e5b8c 100644 --- a/drivers/gpu/drm/amd/amdgpu/dce_v8_0.c +++ b/drivers/gpu/drm/amd/amdgpu/dce_v8_0.c @@ -2796,6 +2796,11 @@ static int dce_v8_0_hw_fini(void *handle) static int dce_v8_0_suspend(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; + int r; + + r = amdgpu_display_suspend_helper(adev); + if (r) + return r; adev->mode_info.bl_level = amdgpu_atombios_encoder_get_backlight_level_from_reg(adev); @@ -2820,8 +2825,10 @@ static int dce_v8_0_resume(void *handle) amdgpu_display_backlight_set_level(adev, adev->mode_info.bl_encoder, bl_level); } + if (ret) + return ret; - return ret; + return amdgpu_display_resume_helper(adev); } static bool dce_v8_0_is_idle(void *handle) diff --git a/drivers/gpu/drm/amd/amdgpu/dce_virtual.c b/drivers/gpu/drm/amd/amdgpu/dce_virtual.c index 9810af712cc0..5c11144da051 100644 --- a/drivers/gpu/drm/amd/amdgpu/dce_virtual.c +++ b/drivers/gpu/drm/amd/amdgpu/dce_virtual.c @@ -39,6 +39,7 @@ #include "dce_v11_0.h" #include "dce_virtual.h" #include "ivsrcid/ivsrcid_vislands30.h" +#include "amdgpu_display.h" #define DCE_VIRTUAL_VBLANK_PERIOD 16666666 @@ -491,12 +492,24 @@ static int dce_virtual_hw_fini(void *handle) static int dce_virtual_suspend(void *handle) { + struct amdgpu_device *adev = (struct amdgpu_device *)handle; + int r; + + r = amdgpu_display_suspend_helper(adev); + if (r) + return r; return dce_virtual_hw_fini(handle); } static int dce_virtual_resume(void *handle) { - return dce_virtual_hw_init(handle); + struct amdgpu_device *adev = (struct amdgpu_device *)handle; + int r; + + r = dce_virtual_hw_init(handle); + if (r) + return r; + return amdgpu_display_resume_helper(adev); } static bool dce_virtual_is_idle(void *handle) -- cgit v1.2.3 From 3aa2cacf79b37f703d6b8f7bd0252c8fe8c3f420 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 12 Mar 2021 15:33:46 -0500 Subject: drm/amdgpu: move s0ix check into amdgpu_device_ip_suspend_phase2 (v3) No functional change. v2: use correct dev v3: rework Reviewed-by: Evan Quan Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index d1028933f41b..a2e15c65fc8f 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -2721,6 +2721,11 @@ static int amdgpu_device_ip_suspend_phase2(struct amdgpu_device *adev) { int i, r; + if (adev->in_s0ix) { + amdgpu_gfx_state_change_set(adev, sGpuChangeState_D3Entry); + return 0; + } + for (i = adev->num_ip_blocks - 1; i >= 0; i--) { if (!adev->ip_blocks[i].status.valid) continue; @@ -3697,10 +3702,7 @@ int amdgpu_device_suspend(struct drm_device *dev, bool fbcon) amdgpu_fence_driver_suspend(adev); - if (!adev->in_s0ix || amdgpu_in_reset(adev)) - r = amdgpu_device_ip_suspend_phase2(adev); - else - amdgpu_gfx_state_change_set(adev, sGpuChangeState_D3Entry); + r = amdgpu_device_ip_suspend_phase2(adev); /* evict remaining vram memory * This second call to evict vram is to evict the gart page table * using the CPU. -- cgit v1.2.3 From 9adb125dde699ffcf5d3e64d2c1476efce00a6f3 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 12 Mar 2021 15:36:04 -0500 Subject: drm/amdgpu: re-enable suspend phase 2 for S0ix This really needs to be done to properly tear down the device. SMC, PSP, and GFX are still problematic, need to dig deeper into what aspect of them that is problematic. Acked-by: Evan Quan Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index a2e15c65fc8f..7809bd6c50e0 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -2721,10 +2721,8 @@ static int amdgpu_device_ip_suspend_phase2(struct amdgpu_device *adev) { int i, r; - if (adev->in_s0ix) { + if (adev->in_s0ix) amdgpu_gfx_state_change_set(adev, sGpuChangeState_D3Entry); - return 0; - } for (i = adev->num_ip_blocks - 1; i >= 0; i--) { if (!adev->ip_blocks[i].status.valid) @@ -2738,6 +2736,14 @@ static int amdgpu_device_ip_suspend_phase2(struct amdgpu_device *adev) adev->ip_blocks[i].status.hw = false; continue; } + + /* XXX fix these remaining cases */ + if (adev->in_s0ix && + (adev->ip_blocks[i].version->type == AMD_IP_BLOCK_TYPE_SMC || /* breaks suspend */ + adev->ip_blocks[i].version->type == AMD_IP_BLOCK_TYPE_PSP || /* breaks resume */ + adev->ip_blocks[i].version->type == AMD_IP_BLOCK_TYPE_GFX)) /* breaks suspend */ + continue; + /* XXX handle errors */ r = adev->ip_blocks[i].version->funcs->suspend(adev); /* XXX handle errors */ -- cgit v1.2.3 From 4021229e32bd9e35f2813715e056f59bb3739e7d Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 12 Mar 2021 16:00:21 -0500 Subject: drm/amdgpu/swsmu: skip gfx cgpg on s0ix suspend The SMU expects CGPG to be enabled when entering S0ix. with this we can re-enable SMU suspend. Acked-by: Evan Quan Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 3 +-- drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c | 3 ++- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index 7809bd6c50e0..fa69ce49eac0 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -2739,8 +2739,7 @@ static int amdgpu_device_ip_suspend_phase2(struct amdgpu_device *adev) /* XXX fix these remaining cases */ if (adev->in_s0ix && - (adev->ip_blocks[i].version->type == AMD_IP_BLOCK_TYPE_SMC || /* breaks suspend */ - adev->ip_blocks[i].version->type == AMD_IP_BLOCK_TYPE_PSP || /* breaks resume */ + (adev->ip_blocks[i].version->type == AMD_IP_BLOCK_TYPE_PSP || /* breaks resume */ adev->ip_blocks[i].version->type == AMD_IP_BLOCK_TYPE_GFX)) /* breaks suspend */ continue; diff --git a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c index 24b19ba7f784..cd905e41080e 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c +++ b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c @@ -1431,7 +1431,8 @@ static int smu_suspend(void *handle) smu->watermarks_bitmap &= ~(WATERMARKS_LOADED); - if (smu->is_apu) + /* skip CGPG when in S0ix */ + if (smu->is_apu && !adev->in_s0ix) smu_set_gfx_cgpg(&adev->smu, false); return 0; -- cgit v1.2.3 From 9bb735abcbd83ec0b75cb2edf8885cff841fc096 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 16 Mar 2021 14:00:36 -0400 Subject: drm/amdgpu: update comments about s0ix suspend/resume Provide and explanation as to why we skip GFX and PSP for S0ix. GFX goes into gfxoff, same as runtime, so no need to tear down and re-init. PSP is part of the always on state, so no need to touch it. Acked-by: Evan Quan Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index fa69ce49eac0..a7ad4e3da218 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -2737,10 +2737,14 @@ static int amdgpu_device_ip_suspend_phase2(struct amdgpu_device *adev) continue; } - /* XXX fix these remaining cases */ + /* skip suspend of gfx and psp for S0ix + * gfx is in gfxoff state, so on resume it will exit gfxoff just + * like at runtime. PSP is also part of the always on hardware + * so no need to suspend it. + */ if (adev->in_s0ix && - (adev->ip_blocks[i].version->type == AMD_IP_BLOCK_TYPE_PSP || /* breaks resume */ - adev->ip_blocks[i].version->type == AMD_IP_BLOCK_TYPE_GFX)) /* breaks suspend */ + (adev->ip_blocks[i].version->type == AMD_IP_BLOCK_TYPE_PSP || + adev->ip_blocks[i].version->type == AMD_IP_BLOCK_TYPE_GFX)) continue; /* XXX handle errors */ -- cgit v1.2.3 From 10cb67eb8a1b21419a7cd8e12f002a36bfef12fd Mon Sep 17 00:00:00 2001 From: Pratik Vishwakarma Date: Tue, 16 Mar 2021 14:15:44 -0400 Subject: drm/amdgpu: skip CG/PG for gfx during S0ix Not needed as the device is in gfxoff state so the CG/PG state is handled just like it would be for gfxoff during runtime gfxoff. This should also prevent delays on resume. Reworked from Pratik's original patch (Alex) Acked-by: Evan Quan Signed-off-by: Alex Deucher Signed-off-by: Pratik Vishwakarma --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index a7ad4e3da218..eb61d5e5535b 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -2371,6 +2371,10 @@ static int amdgpu_device_set_cg_state(struct amdgpu_device *adev, i = state == AMD_CG_STATE_GATE ? j : adev->num_ip_blocks - j - 1; if (!adev->ip_blocks[i].status.late_initialized) continue; + /* skip CG for GFX on S0ix */ + if (adev->in_s0ix && + adev->ip_blocks[i].version->type == AMD_IP_BLOCK_TYPE_GFX) + continue; /* skip CG for VCE/UVD, it's handled specially */ if (adev->ip_blocks[i].version->type != AMD_IP_BLOCK_TYPE_UVD && adev->ip_blocks[i].version->type != AMD_IP_BLOCK_TYPE_VCE && @@ -2402,6 +2406,10 @@ static int amdgpu_device_set_pg_state(struct amdgpu_device *adev, enum amd_power i = state == AMD_PG_STATE_GATE ? j : adev->num_ip_blocks - j - 1; if (!adev->ip_blocks[i].status.late_initialized) continue; + /* skip PG for GFX on S0ix */ + if (adev->in_s0ix && + adev->ip_blocks[i].version->type == AMD_IP_BLOCK_TYPE_GFX) + continue; /* skip CG for VCE/UVD, it's handled specially */ if (adev->ip_blocks[i].version->type != AMD_IP_BLOCK_TYPE_UVD && adev->ip_blocks[i].version->type != AMD_IP_BLOCK_TYPE_VCE && -- cgit v1.2.3 From 264705005e6bc7f484652c1d7aee798034c82e12 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 16 Mar 2021 14:18:30 -0400 Subject: drm/amdgpu: drop S0ix checks around CG/PG in suspend We handle it properly within the CG/PG functions directly now. Acked-by: Evan Quan Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index eb61d5e5535b..de2cb3b1757c 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -2686,10 +2686,8 @@ static int amdgpu_device_ip_suspend_phase1(struct amdgpu_device *adev) { int i, r; - if (!adev->in_s0ix || amdgpu_in_reset(adev)) { - amdgpu_device_set_pg_state(adev, AMD_PG_STATE_UNGATE); - amdgpu_device_set_cg_state(adev, AMD_CG_STATE_UNGATE); - } + amdgpu_device_set_pg_state(adev, AMD_PG_STATE_UNGATE); + amdgpu_device_set_cg_state(adev, AMD_CG_STATE_UNGATE); for (i = adev->num_ip_blocks - 1; i >= 0; i--) { if (!adev->ip_blocks[i].status.valid) -- cgit v1.2.3 From ac5789ef927006a8449ea235a866922b2d8f8290 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 16 Mar 2021 22:02:14 -0400 Subject: drm/amdgpu: skip kfd suspend/resume for S0ix GFX is in gfxoff mode during s0ix so we shouldn't need to actually tear anything down and restore it. Acked-by: Evan Quan Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index de2cb3b1757c..8a5a8ff5d362 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -3710,7 +3710,8 @@ int amdgpu_device_suspend(struct drm_device *dev, bool fbcon) r = amdgpu_device_ip_suspend_phase1(adev); - amdgpu_amdkfd_suspend(adev, adev->in_runpm); + if (!adev->in_s0ix) + amdgpu_amdkfd_suspend(adev, adev->in_runpm); /* evict vram memory */ amdgpu_bo_evict_vram(adev); @@ -3770,9 +3771,11 @@ int amdgpu_device_resume(struct drm_device *dev, bool fbcon) queue_delayed_work(system_wq, &adev->delayed_init_work, msecs_to_jiffies(AMDGPU_RESUME_MS)); - r = amdgpu_amdkfd_resume(adev, adev->in_runpm); - if (r) - return r; + if (!adev->in_s0ix) { + r = amdgpu_amdkfd_resume(adev, adev->in_runpm); + if (r) + return r; + } /* Make sure IB tests flushed */ flush_delayed_work(&adev->delayed_init_work); -- cgit v1.2.3 From a07231084da2207629b42244380ae2f1e10bd9b4 Mon Sep 17 00:00:00 2001 From: Huy Nguyen Date: Thu, 18 Mar 2021 20:33:19 -0500 Subject: net/mlx5: Add back multicast stats for uplink representor The multicast counter got removed from uplink representor due to the cited patch. Fixes: 47c97e6b10a1 ("net/mlx5e: Fix multicast counter not up-to-date in "ip -s"") Signed-off-by: Huy Nguyen Reviewed-by: Daniel Jurgens Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 33b418796e43..c8b8249846a9 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -3846,10 +3846,17 @@ mlx5e_get_stats(struct net_device *dev, struct rtnl_link_stats64 *stats) } if (mlx5e_is_uplink_rep(priv)) { + struct mlx5e_vport_stats *vstats = &priv->stats.vport; + stats->rx_packets = PPORT_802_3_GET(pstats, a_frames_received_ok); stats->rx_bytes = PPORT_802_3_GET(pstats, a_octets_received_ok); stats->tx_packets = PPORT_802_3_GET(pstats, a_frames_transmitted_ok); stats->tx_bytes = PPORT_802_3_GET(pstats, a_octets_transmitted_ok); + + /* vport multicast also counts packets that are dropped due to steering + * or rx out of buffer + */ + stats->multicast = VPORT_COUNTER_GET(vstats, received_eth_multicast.packets); } else { mlx5e_fold_sw_stats64(priv, stats); } -- cgit v1.2.3 From 7d6c86e3ccb5ceea767df5c7a9a17cdfccd3df9a Mon Sep 17 00:00:00 2001 From: Alaa Hleihel Date: Wed, 10 Mar 2021 17:01:46 +0200 Subject: net/mlx5e: Allow to match on MPLS parameters only for MPLS over UDP Currently, we support hardware offload only for MPLS over UDP. However, rules matching on MPLS parameters are now wrongly offloaded for regular MPLS, without actually taking the parameters into consideration when doing the offload. Fix it by rejecting such unsupported rules. Fixes: 72046a91d134 ("net/mlx5e: Allow to match on mpls parameters") Signed-off-by: Alaa Hleihel Reviewed-by: Roi Dayan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index 0cacf46dc950..3359098c51d4 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -2296,6 +2296,16 @@ static int __parse_cls_flower(struct mlx5e_priv *priv, *match_level = MLX5_MATCH_L4; } + /* Currenlty supported only for MPLS over UDP */ + if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_MPLS) && + !netif_is_bareudp(filter_dev)) { + NL_SET_ERR_MSG_MOD(extack, + "Matching on MPLS is supported only for MPLS over UDP"); + netdev_err(priv->netdev, + "Matching on MPLS is supported only for MPLS over UDP\n"); + return -EOPNOTSUPP; + } + return 0; } -- cgit v1.2.3 From 96b5b4585843e3c83fb1930e5dfbefd0fb889c55 Mon Sep 17 00:00:00 2001 From: Dima Chumak Date: Thu, 4 Mar 2021 21:28:11 +0200 Subject: net/mlx5e: Offload tuple rewrite for non-CT flows Setting connection tracking OVS flows and then setting non-CT flows that use tuple rewrite action (e.g. mod_tp_dst), causes the latter flows not being offloaded. Fix by using a stricter condition in modify_header_match_supported() to check tuple rewrite support only for flows with CT action. The check is factored out into standalone modify_tuple_supported() function to aid readability. Fixes: 7e36feeb0467 ("net/mlx5e: CT: Don't offload tuple rewrites for established tuples") Signed-off-by: Dima Chumak Reviewed-by: Paul Blakey Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c | 3 +- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 44 ++++++++++++++++------ 2 files changed, 35 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c index f3f6eb081948..b2cd29847a37 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c @@ -1181,7 +1181,8 @@ int mlx5_tc_ct_add_no_trk_match(struct mlx5_flow_spec *spec) mlx5e_tc_match_to_reg_get_match(spec, CTSTATE_TO_REG, &ctstate, &ctstate_mask); - if (ctstate_mask) + + if ((ctstate & ctstate_mask) == MLX5_CT_STATE_TRK_BIT) return -EOPNOTSUPP; ctstate_mask |= MLX5_CT_STATE_TRK_BIT; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index 3359098c51d4..df2a0af854bb 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -2909,6 +2909,37 @@ static int is_action_keys_supported(const struct flow_action_entry *act, return 0; } +static bool modify_tuple_supported(bool modify_tuple, bool ct_clear, + bool ct_flow, struct netlink_ext_ack *extack, + struct mlx5e_priv *priv, + struct mlx5_flow_spec *spec) +{ + if (!modify_tuple || ct_clear) + return true; + + if (ct_flow) { + NL_SET_ERR_MSG_MOD(extack, + "can't offload tuple modification with non-clear ct()"); + netdev_info(priv->netdev, + "can't offload tuple modification with non-clear ct()"); + return false; + } + + /* Add ct_state=-trk match so it will be offloaded for non ct flows + * (or after clear action), as otherwise, since the tuple is changed, + * we can't restore ct state + */ + if (mlx5_tc_ct_add_no_trk_match(spec)) { + NL_SET_ERR_MSG_MOD(extack, + "can't offload tuple modification with ct matches and no ct(clear) action"); + netdev_info(priv->netdev, + "can't offload tuple modification with ct matches and no ct(clear) action"); + return false; + } + + return true; +} + static bool modify_header_match_supported(struct mlx5e_priv *priv, struct mlx5_flow_spec *spec, struct flow_action *flow_action, @@ -2947,18 +2978,9 @@ static bool modify_header_match_supported(struct mlx5e_priv *priv, return err; } - /* Add ct_state=-trk match so it will be offloaded for non ct flows - * (or after clear action), as otherwise, since the tuple is changed, - * we can't restore ct state - */ - if (!ct_clear && modify_tuple && - mlx5_tc_ct_add_no_trk_match(spec)) { - NL_SET_ERR_MSG_MOD(extack, - "can't offload tuple modify header with ct matches"); - netdev_info(priv->netdev, - "can't offload tuple modify header with ct matches"); + if (!modify_tuple_supported(modify_tuple, ct_clear, ct_flow, extack, + priv, spec)) return false; - } ip_proto = MLX5_GET(fte_match_set_lyr_2_4, headers_v, ip_protocol); if (modify_ip_header && ip_proto != IPPROTO_TCP && -- cgit v1.2.3 From 4eacfe72e3e037e3fc019113df32c39a705148c2 Mon Sep 17 00:00:00 2001 From: Aya Levin Date: Thu, 11 Mar 2021 17:46:35 +0200 Subject: net/mlx5e: Fix error path for ethtool set-priv-flag Expose error value when failing to comply to command: $ ethtool --set-priv-flags eth2 rx_cqe_compress [on/off] Fixes: be7e87f92b58 ("net/mlx5e: Fail safe cqe compressing/moderation mode setting") Signed-off-by: Aya Levin Reviewed-by: Tariq Toukan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index 0e059d5c57ac..f5f2a8fd0046 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -1887,6 +1887,7 @@ static int set_pflag_rx_cqe_compress(struct net_device *netdev, { struct mlx5e_priv *priv = netdev_priv(netdev); struct mlx5_core_dev *mdev = priv->mdev; + int err; if (!MLX5_CAP_GEN(mdev, cqe_compression)) return -EOPNOTSUPP; @@ -1896,7 +1897,10 @@ static int set_pflag_rx_cqe_compress(struct net_device *netdev, return -EINVAL; } - mlx5e_modify_rx_cqe_compression_locked(priv, enable); + err = mlx5e_modify_rx_cqe_compression_locked(priv, enable); + if (err) + return err; + priv->channels.params.rx_cqe_compress_def = enable; return 0; -- cgit v1.2.3 From 846d6da1fcdb14105f86b46b4345233550a79d55 Mon Sep 17 00:00:00 2001 From: Maxim Mikityanskiy Date: Mon, 1 Mar 2021 20:59:59 +0200 Subject: net/mlx5e: Fix division by 0 in mlx5e_select_queue mlx5e_select_queue compares num_tc_x_num_ch to real_num_tx_queues to determine if HTB and/or PTP offloads are active. If they are, it calculates netdev_pick_tx() % num_tc_x_num_ch to prevent it from selecting HTB and PTP queues for regular traffic. However, before the channels are first activated, num_tc_x_num_ch is zero. If ndo_select_queue gets called at this point, the HTB/PTP check will pass, and mlx5e_select_queue will attempt to take a modulo by num_tc_x_num_ch, which equals to zero. This commit fixes the bug by assigning num_tc_x_num_ch to a non-zero value before registering the netdev. Fixes: 214baf22870c ("net/mlx5e: Support HTB offload") Reported-by: Jesper Dangaard Brouer Signed-off-by: Maxim Mikityanskiy Reviewed-by: Tariq Toukan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index c8b8249846a9..158f947a8503 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -4979,6 +4979,11 @@ void mlx5e_build_nic_params(struct mlx5e_priv *priv, struct mlx5e_xsk *xsk, u16 priv->max_nch); params->num_tc = 1; + /* Set an initial non-zero value, so that mlx5e_select_queue won't + * divide by zero if called before first activating channels. + */ + priv->num_tc_x_num_ch = params->num_channels * params->num_tc; + /* SQ */ params->log_sq_size = is_kdump_kernel() ? MLX5E_PARAMS_MINIMUM_LOG_SQ_SIZE : -- cgit v1.2.3 From 7c1ef1959b6fefe616ef3e7df832bf63dfbab9cf Mon Sep 17 00:00:00 2001 From: Parav Pandit Date: Thu, 11 Mar 2021 20:19:25 +0200 Subject: net/mlx5: SF, do not use ecpu bit for vhca state processing Device firmware doesn't handle ecpu bit for vhca state processing events and commands. Instead device firmware refers to the unique function id to distinguish SF of different PCI functions. When ecpu bit is used, firmware returns a syndrome. mlx5_cmd_check:780:(pid 872): MODIFY_VHCA_STATE(0xb0e) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x263211) mlx5_sf_dev_table_create:248:(pid 872): SF DEV table create err = -22 Hence, avoid using ecpu bit. Fixes: 8f0105418668 ("net/mlx5: SF, Add port add delete functionality") Fixes: 90d010b8634b ("net/mlx5: SF, Add auxiliary device support") Signed-off-by: Parav Pandit Reviewed-by: Vu Pham Signed-off-by: Saeed Mahameed --- .../net/ethernet/mellanox/mlx5/core/sf/dev/dev.c | 4 +--- .../net/ethernet/mellanox/mlx5/core/sf/hw_table.c | 8 +++----- .../ethernet/mellanox/mlx5/core/sf/vhca_event.c | 22 ++++++++++------------ .../ethernet/mellanox/mlx5/core/sf/vhca_event.h | 7 +++---- 4 files changed, 17 insertions(+), 24 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/sf/dev/dev.c b/drivers/net/ethernet/mellanox/mlx5/core/sf/dev/dev.c index b265f27b2166..90b524c59f3c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/sf/dev/dev.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/sf/dev/dev.c @@ -181,15 +181,13 @@ static int mlx5_sf_dev_vhca_arm_all(struct mlx5_sf_dev_table *table) u16 max_functions; u16 function_id; int err = 0; - bool ecpu; int i; max_functions = mlx5_sf_max_functions(dev); function_id = MLX5_CAP_GEN(dev, sf_base_id); - ecpu = mlx5_read_embedded_cpu(dev); /* Arm the vhca context as the vhca event notifier */ for (i = 0; i < max_functions; i++) { - err = mlx5_vhca_event_arm(dev, function_id, ecpu); + err = mlx5_vhca_event_arm(dev, function_id); if (err) return err; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/sf/hw_table.c b/drivers/net/ethernet/mellanox/mlx5/core/sf/hw_table.c index 0914909806cb..a5a0f60bef66 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/sf/hw_table.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/sf/hw_table.c @@ -6,7 +6,7 @@ #include "sf.h" #include "mlx5_ifc_vhca_event.h" #include "vhca_event.h" -#include "ecpf.h" +#include "mlx5_core.h" struct mlx5_sf_hw { u32 usr_sfnum; @@ -18,7 +18,6 @@ struct mlx5_sf_hw_table { struct mlx5_core_dev *dev; struct mlx5_sf_hw *sfs; int max_local_functions; - u8 ecpu: 1; struct mutex table_lock; /* Serializes sf deletion and vhca state change handler. */ struct notifier_block vhca_nb; }; @@ -72,7 +71,7 @@ int mlx5_sf_hw_table_sf_alloc(struct mlx5_core_dev *dev, u32 usr_sfnum) if (err) goto err; - err = mlx5_modify_vhca_sw_id(dev, hw_fn_id, table->ecpu, usr_sfnum); + err = mlx5_modify_vhca_sw_id(dev, hw_fn_id, usr_sfnum); if (err) goto vhca_err; @@ -118,7 +117,7 @@ void mlx5_sf_hw_table_sf_deferred_free(struct mlx5_core_dev *dev, u16 id) hw_fn_id = mlx5_sf_sw_to_hw_id(dev, id); mutex_lock(&table->table_lock); - err = mlx5_cmd_query_vhca_state(dev, hw_fn_id, table->ecpu, out, sizeof(out)); + err = mlx5_cmd_query_vhca_state(dev, hw_fn_id, out, sizeof(out)); if (err) goto err; state = MLX5_GET(query_vhca_state_out, out, vhca_state_context.vhca_state); @@ -164,7 +163,6 @@ int mlx5_sf_hw_table_init(struct mlx5_core_dev *dev) table->dev = dev; table->sfs = sfs; table->max_local_functions = max_functions; - table->ecpu = mlx5_read_embedded_cpu(dev); dev->priv.sf_hw_table = table; mlx5_core_dbg(dev, "SF HW table: max sfs = %d\n", max_functions); return 0; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/sf/vhca_event.c b/drivers/net/ethernet/mellanox/mlx5/core/sf/vhca_event.c index f1c2068d4f2a..28b14b05086f 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/sf/vhca_event.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/sf/vhca_event.c @@ -19,52 +19,51 @@ struct mlx5_vhca_event_work { struct mlx5_vhca_state_event event; }; -int mlx5_cmd_query_vhca_state(struct mlx5_core_dev *dev, u16 function_id, - bool ecpu, u32 *out, u32 outlen) +int mlx5_cmd_query_vhca_state(struct mlx5_core_dev *dev, u16 function_id, u32 *out, u32 outlen) { u32 in[MLX5_ST_SZ_DW(query_vhca_state_in)] = {}; MLX5_SET(query_vhca_state_in, in, opcode, MLX5_CMD_OP_QUERY_VHCA_STATE); MLX5_SET(query_vhca_state_in, in, function_id, function_id); - MLX5_SET(query_vhca_state_in, in, embedded_cpu_function, ecpu); + MLX5_SET(query_vhca_state_in, in, embedded_cpu_function, 0); return mlx5_cmd_exec(dev, in, sizeof(in), out, outlen); } static int mlx5_cmd_modify_vhca_state(struct mlx5_core_dev *dev, u16 function_id, - bool ecpu, u32 *in, u32 inlen) + u32 *in, u32 inlen) { u32 out[MLX5_ST_SZ_DW(modify_vhca_state_out)] = {}; MLX5_SET(modify_vhca_state_in, in, opcode, MLX5_CMD_OP_MODIFY_VHCA_STATE); MLX5_SET(modify_vhca_state_in, in, function_id, function_id); - MLX5_SET(modify_vhca_state_in, in, embedded_cpu_function, ecpu); + MLX5_SET(modify_vhca_state_in, in, embedded_cpu_function, 0); return mlx5_cmd_exec(dev, in, inlen, out, sizeof(out)); } -int mlx5_modify_vhca_sw_id(struct mlx5_core_dev *dev, u16 function_id, bool ecpu, u32 sw_fn_id) +int mlx5_modify_vhca_sw_id(struct mlx5_core_dev *dev, u16 function_id, u32 sw_fn_id) { u32 out[MLX5_ST_SZ_DW(modify_vhca_state_out)] = {}; u32 in[MLX5_ST_SZ_DW(modify_vhca_state_in)] = {}; MLX5_SET(modify_vhca_state_in, in, opcode, MLX5_CMD_OP_MODIFY_VHCA_STATE); MLX5_SET(modify_vhca_state_in, in, function_id, function_id); - MLX5_SET(modify_vhca_state_in, in, embedded_cpu_function, ecpu); + MLX5_SET(modify_vhca_state_in, in, embedded_cpu_function, 0); MLX5_SET(modify_vhca_state_in, in, vhca_state_field_select.sw_function_id, 1); MLX5_SET(modify_vhca_state_in, in, vhca_state_context.sw_function_id, sw_fn_id); return mlx5_cmd_exec_inout(dev, modify_vhca_state, in, out); } -int mlx5_vhca_event_arm(struct mlx5_core_dev *dev, u16 function_id, bool ecpu) +int mlx5_vhca_event_arm(struct mlx5_core_dev *dev, u16 function_id) { u32 in[MLX5_ST_SZ_DW(modify_vhca_state_in)] = {}; MLX5_SET(modify_vhca_state_in, in, vhca_state_context.arm_change_event, 1); MLX5_SET(modify_vhca_state_in, in, vhca_state_field_select.arm_change_event, 1); - return mlx5_cmd_modify_vhca_state(dev, function_id, ecpu, in, sizeof(in)); + return mlx5_cmd_modify_vhca_state(dev, function_id, in, sizeof(in)); } static void @@ -73,7 +72,7 @@ mlx5_vhca_event_notify(struct mlx5_core_dev *dev, struct mlx5_vhca_state_event * u32 out[MLX5_ST_SZ_DW(query_vhca_state_out)] = {}; int err; - err = mlx5_cmd_query_vhca_state(dev, event->function_id, event->ecpu, out, sizeof(out)); + err = mlx5_cmd_query_vhca_state(dev, event->function_id, out, sizeof(out)); if (err) return; @@ -82,7 +81,7 @@ mlx5_vhca_event_notify(struct mlx5_core_dev *dev, struct mlx5_vhca_state_event * event->new_vhca_state = MLX5_GET(query_vhca_state_out, out, vhca_state_context.vhca_state); - mlx5_vhca_event_arm(dev, event->function_id, event->ecpu); + mlx5_vhca_event_arm(dev, event->function_id); blocking_notifier_call_chain(&dev->priv.vhca_state_notifier->n_head, 0, event); } @@ -111,7 +110,6 @@ mlx5_vhca_state_change_notifier(struct notifier_block *nb, unsigned long type, v INIT_WORK(&work->work, &mlx5_vhca_state_work_handler); work->notifier = notifier; work->event.function_id = be16_to_cpu(eqe->data.vhca_state.function_id); - work->event.ecpu = be16_to_cpu(eqe->data.vhca_state.ec_function); mlx5_events_work_enqueue(notifier->dev, &work->work); return NOTIFY_OK; } diff --git a/drivers/net/ethernet/mellanox/mlx5/core/sf/vhca_event.h b/drivers/net/ethernet/mellanox/mlx5/core/sf/vhca_event.h index 1fe1ec6f4d4b..013cdfe90616 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/sf/vhca_event.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/sf/vhca_event.h @@ -10,7 +10,6 @@ struct mlx5_vhca_state_event { u16 function_id; u16 sw_function_id; u8 new_vhca_state; - bool ecpu; }; static inline bool mlx5_vhca_event_supported(const struct mlx5_core_dev *dev) @@ -25,10 +24,10 @@ void mlx5_vhca_event_start(struct mlx5_core_dev *dev); void mlx5_vhca_event_stop(struct mlx5_core_dev *dev); int mlx5_vhca_event_notifier_register(struct mlx5_core_dev *dev, struct notifier_block *nb); void mlx5_vhca_event_notifier_unregister(struct mlx5_core_dev *dev, struct notifier_block *nb); -int mlx5_modify_vhca_sw_id(struct mlx5_core_dev *dev, u16 function_id, bool ecpu, u32 sw_fn_id); -int mlx5_vhca_event_arm(struct mlx5_core_dev *dev, u16 function_id, bool ecpu); +int mlx5_modify_vhca_sw_id(struct mlx5_core_dev *dev, u16 function_id, u32 sw_fn_id); +int mlx5_vhca_event_arm(struct mlx5_core_dev *dev, u16 function_id); int mlx5_cmd_query_vhca_state(struct mlx5_core_dev *dev, u16 function_id, - bool ecpu, u32 *out, u32 outlen); + u32 *out, u32 outlen); #else static inline void mlx5_vhca_state_cap_handle(struct mlx5_core_dev *dev, void *set_hca_cap) -- cgit v1.2.3 From 5ee7d4c7fbc9d3119a20b1c77d34003d1f82ac26 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 22 Mar 2021 17:44:29 +0100 Subject: isdn: capi: fix mismatched prototypes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit gcc-11 complains about a prototype declaration that is different from the function definition: drivers/isdn/capi/kcapi.c:724:44: error: argument 2 of type ‘u8 *’ {aka ‘unsigned char *’} declared as a pointer [-Werror=array-parameter=] 724 | u16 capi20_get_manufacturer(u32 contr, u8 *buf) | ~~~~^~~ In file included from drivers/isdn/capi/kcapi.c:13: drivers/isdn/capi/kcapi.h:62:43: note: previously declared as an array ‘u8[64]’ {aka ‘unsigned char[64]’} 62 | u16 capi20_get_manufacturer(u32 contr, u8 buf[CAPI_MANUFACTURER_LEN]); | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/isdn/capi/kcapi.c:790:38: error: argument 2 of type ‘u8 *’ {aka ‘unsigned char *’} declared as a pointer [-Werror=array-parameter=] 790 | u16 capi20_get_serial(u32 contr, u8 *serial) | ~~~~^~~~~~ In file included from drivers/isdn/capi/kcapi.c:13: drivers/isdn/capi/kcapi.h:64:37: note: previously declared as an array ‘u8[8]’ {aka ‘unsigned char[8]’} 64 | u16 capi20_get_serial(u32 contr, u8 serial[CAPI_SERIAL_LEN]); | ~~~^~~~~~~~~~~~~~~~~~~~~~~ Change the definition to make them match. Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- drivers/isdn/capi/kcapi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/isdn/capi/kcapi.c b/drivers/isdn/capi/kcapi.c index 7168778fbbe1..cb0afe897162 100644 --- a/drivers/isdn/capi/kcapi.c +++ b/drivers/isdn/capi/kcapi.c @@ -721,7 +721,7 @@ u16 capi20_put_message(struct capi20_appl *ap, struct sk_buff *skb) * Return value: CAPI result code */ -u16 capi20_get_manufacturer(u32 contr, u8 *buf) +u16 capi20_get_manufacturer(u32 contr, u8 buf[CAPI_MANUFACTURER_LEN]) { struct capi_ctr *ctr; u16 ret; @@ -787,7 +787,7 @@ u16 capi20_get_version(u32 contr, struct capi_version *verp) * Return value: CAPI result code */ -u16 capi20_get_serial(u32 contr, u8 *serial) +u16 capi20_get_serial(u32 contr, u8 serial[CAPI_SERIAL_LEN]) { struct capi_ctr *ctr; u16 ret; -- cgit v1.2.3 From 627dc55c273dab308303a5217bd3e767d7083ddb Mon Sep 17 00:00:00 2001 From: Kalyan Thota Date: Mon, 22 Mar 2021 02:17:12 -0700 Subject: drm/msm/disp/dpu1: icc path needs to be set before dpu runtime resume DPU runtime resume will request for a min vote on the AXI bus as it is a necessary step before turning ON the AXI clock. The change does below 1) Move the icc path set before requesting runtime get_sync. 2) remove the dependency of hw catalog for min ib vote as it is initialized at a later point. Signed-off-by: Kalyan Thota Tested-by: Matthias Kaehlcke Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c index 5a8e3e1fc48c..85f2c3564c96 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c @@ -43,6 +43,8 @@ #define DPU_DEBUGFS_DIR "msm_dpu" #define DPU_DEBUGFS_HWMASKNAME "hw_log_mask" +#define MIN_IB_BW 400000000ULL /* Min ib vote 400MB */ + static int dpu_kms_hw_init(struct msm_kms *kms); static void _dpu_kms_mmu_destroy(struct dpu_kms *dpu_kms); @@ -931,6 +933,9 @@ static int dpu_kms_hw_init(struct msm_kms *kms) DPU_DEBUG("REG_DMA is not defined"); } + if (of_device_is_compatible(dev->dev->of_node, "qcom,sc7180-mdss")) + dpu_kms_parse_data_bus_icc_path(dpu_kms); + pm_runtime_get_sync(&dpu_kms->pdev->dev); dpu_kms->core_rev = readl_relaxed(dpu_kms->mmio + 0x0); @@ -1032,9 +1037,6 @@ static int dpu_kms_hw_init(struct msm_kms *kms) dpu_vbif_init_memtypes(dpu_kms); - if (of_device_is_compatible(dev->dev->of_node, "qcom,sc7180-mdss")) - dpu_kms_parse_data_bus_icc_path(dpu_kms); - pm_runtime_put_sync(&dpu_kms->pdev->dev); return 0; @@ -1191,10 +1193,10 @@ static int __maybe_unused dpu_runtime_resume(struct device *dev) ddev = dpu_kms->dev; + WARN_ON(!(dpu_kms->num_paths)); /* Min vote of BW is required before turning on AXI clk */ for (i = 0; i < dpu_kms->num_paths; i++) - icc_set_bw(dpu_kms->path[i], 0, - dpu_kms->catalog->perf.min_dram_ib); + icc_set_bw(dpu_kms->path[i], 0, Bps_to_icc(MIN_IB_BW)); rc = msm_dss_enable_clk(mp->clk_config, mp->num_clk, true); if (rc) { -- cgit v1.2.3 From a61f4661fba404418a7c77e86586dc52a58a93c6 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 2 Mar 2021 15:56:16 +0200 Subject: mfd: intel_quark_i2c_gpio: Revert "Constify static struct resources" The structures are used as place holders, so they are modified at run-time. Obviously they may not be constants. BUG: unable to handle page fault for address: d0643220 ... CPU: 0 PID: 110 Comm: modprobe Not tainted 5.11.0+ #1 Hardware name: Intel Corp. QUARK/GalileoGen2, BIOS 0x01000200 01/01/2014 EIP: intel_quark_mfd_probe+0x93/0x1c0 [intel_quark_i2c_gpio] This partially reverts the commit c4a164f41554d2899bed94bdcc499263f41787b4. While at it, add a comment to avoid similar changes in the future. Fixes: c4a164f41554 ("mfd: Constify static struct resources") Signed-off-by: Andy Shevchenko Reviewed-by: Rikard Falkeborn Tested-by: Tong Zhang Signed-off-by: Lee Jones --- drivers/mfd/intel_quark_i2c_gpio.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/intel_quark_i2c_gpio.c b/drivers/mfd/intel_quark_i2c_gpio.c index fe8ca945f367..b67cb0a3ab05 100644 --- a/drivers/mfd/intel_quark_i2c_gpio.c +++ b/drivers/mfd/intel_quark_i2c_gpio.c @@ -72,7 +72,8 @@ static const struct dmi_system_id dmi_platform_info[] = { {} }; -static const struct resource intel_quark_i2c_res[] = { +/* This is used as a place holder and will be modified at run-time */ +static struct resource intel_quark_i2c_res[] = { [INTEL_QUARK_IORES_MEM] = { .flags = IORESOURCE_MEM, }, @@ -85,7 +86,8 @@ static struct mfd_cell_acpi_match intel_quark_acpi_match_i2c = { .adr = MFD_ACPI_MATCH_I2C, }; -static const struct resource intel_quark_gpio_res[] = { +/* This is used as a place holder and will be modified at run-time */ +static struct resource intel_quark_gpio_res[] = { [INTEL_QUARK_IORES_MEM] = { .flags = IORESOURCE_MEM, }, -- cgit v1.2.3 From 2800aadc18a64c96b051bcb7da8a7df7d505db3f Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Tue, 2 Mar 2021 11:26:55 +0100 Subject: iwlwifi: Fix softirq/hardirq disabling in iwl_pcie_enqueue_hcmd() It's possible for iwl_pcie_enqueue_hcmd() to be called with hard IRQs disabled (e.g. from LED core). We can't enable BHs in such a situation. Turn the unconditional BH-enable/BH-disable code into hardirq-disable/conditional-enable. This fixes the warning below. WARNING: CPU: 1 PID: 1139 at kernel/softirq.c:178 __local_bh_enable_ip+0xa5/0xf0 CPU: 1 PID: 1139 Comm: NetworkManager Not tainted 5.12.0-rc1-00004-gb4ded168af79 #7 Hardware name: LENOVO 20K5S22R00/20K5S22R00, BIOS R0IET38W (1.16 ) 05/31/2017 RIP: 0010:__local_bh_enable_ip+0xa5/0xf0 Code: f7 69 e8 ee 23 14 00 fb 66 0f 1f 44 00 00 65 8b 05 f0 f4 f7 69 85 c0 74 3f 48 83 c4 08 5b c3 65 8b 05 9b fe f7 69 85 c0 75 8e <0f> 0b eb 8a 48 89 3c 24 e8 4e 20 14 00 48 8b 3c 24 eb 91 e8 13 4e RSP: 0018:ffffafd580b13298 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000201 RCX: 0000000000000000 RDX: 0000000000000003 RSI: 0000000000000201 RDI: ffffffffc1272389 RBP: ffff96517ae4c018 R08: 0000000000000001 R09: 0000000000000000 R10: ffffafd580b13178 R11: 0000000000000001 R12: ffff96517b060000 R13: 0000000000000000 R14: ffffffff80000000 R15: 0000000000000001 FS: 00007fc604ebefc0(0000) GS:ffff965267480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055fb3fef13b2 CR3: 0000000109112004 CR4: 00000000003706e0 Call Trace: ? _raw_spin_unlock_bh+0x1f/0x30 iwl_pcie_enqueue_hcmd+0x5d9/0xa00 [iwlwifi] iwl_trans_txq_send_hcmd+0x6c/0x430 [iwlwifi] iwl_trans_send_cmd+0x88/0x170 [iwlwifi] ? lock_acquire+0x277/0x3d0 iwl_mvm_send_cmd+0x32/0x80 [iwlmvm] iwl_mvm_led_set+0xc2/0xe0 [iwlmvm] ? led_trigger_event+0x46/0x70 led_trigger_event+0x46/0x70 ieee80211_do_open+0x5c5/0xa20 [mac80211] ieee80211_open+0x67/0x90 [mac80211] __dev_open+0xd4/0x150 __dev_change_flags+0x19e/0x1f0 dev_change_flags+0x23/0x60 do_setlink+0x30d/0x1230 ? lock_is_held_type+0xb4/0x120 ? __nla_validate_parse.part.7+0x57/0xcb0 ? __lock_acquire+0x2e1/0x1a50 __rtnl_newlink+0x560/0x910 ? __lock_acquire+0x2e1/0x1a50 ? __lock_acquire+0x2e1/0x1a50 ? lock_acquire+0x277/0x3d0 ? sock_def_readable+0x5/0x290 ? lock_is_held_type+0xb4/0x120 ? find_held_lock+0x2d/0x90 ? sock_def_readable+0xb3/0x290 ? lock_release+0x166/0x2a0 ? lock_is_held_type+0x90/0x120 rtnl_newlink+0x47/0x70 rtnetlink_rcv_msg+0x25c/0x470 ? netlink_deliver_tap+0x97/0x3e0 ? validate_linkmsg+0x350/0x350 netlink_rcv_skb+0x50/0x100 netlink_unicast+0x1b2/0x280 netlink_sendmsg+0x336/0x450 sock_sendmsg+0x5b/0x60 ____sys_sendmsg+0x1ed/0x250 ? copy_msghdr_from_user+0x5c/0x90 ___sys_sendmsg+0x88/0xd0 ? lock_is_held_type+0xb4/0x120 ? find_held_lock+0x2d/0x90 ? lock_release+0x166/0x2a0 ? __fget_files+0xfe/0x1d0 ? __sys_sendmsg+0x5e/0xa0 __sys_sendmsg+0x5e/0xa0 ? lockdep_hardirqs_on_prepare+0xd9/0x170 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fc605c9572d Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 da ee ff ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 33 44 89 c7 48 89 44 24 08 e8 2e ef ff ff 48 RSP: 002b:00007fffc83789f0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 000055ef468570c0 RCX: 00007fc605c9572d RDX: 0000000000000000 RSI: 00007fffc8378a30 RDI: 000000000000000c RBP: 0000000000000010 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000 R13: 00007fffc8378b80 R14: 00007fffc8378b7c R15: 0000000000000000 irq event stamp: 170785 hardirqs last enabled at (170783): [] __local_bh_enable_ip+0x82/0xf0 hardirqs last disabled at (170784): [] _raw_read_lock_irqsave+0x8d/0x90 softirqs last enabled at (170782): [] iwl_pcie_enqueue_hcmd+0x5d9/0xa00 [iwlwifi] softirqs last disabled at (170785): [] iwl_pcie_enqueue_hcmd+0x116/0xa00 [iwlwifi] Signed-off-by: Jiri Kosina Tested-by: Sedat Dilek # LLVM/Clang v12.0.0-rc3 Acked-by: Luca Coelho Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2103021125430.12405@cbobk.fhfr.pm --- drivers/net/wireless/intel/iwlwifi/pcie/tx.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/tx.c b/drivers/net/wireless/intel/iwlwifi/pcie/tx.c index 381e8f90b6f2..7ae32491b5da 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/tx.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/tx.c @@ -928,6 +928,7 @@ int iwl_pcie_enqueue_hcmd(struct iwl_trans *trans, u32 cmd_pos; const u8 *cmddata[IWL_MAX_CMD_TBS_PER_TFD]; u16 cmdlen[IWL_MAX_CMD_TBS_PER_TFD]; + unsigned long flags; if (WARN(!trans->wide_cmd_header && group_id > IWL_ALWAYS_LONG_GROUP, @@ -1011,10 +1012,10 @@ int iwl_pcie_enqueue_hcmd(struct iwl_trans *trans, goto free_dup_buf; } - spin_lock_bh(&txq->lock); + spin_lock_irqsave(&txq->lock, flags); if (iwl_txq_space(trans, txq) < ((cmd->flags & CMD_ASYNC) ? 2 : 1)) { - spin_unlock_bh(&txq->lock); + spin_unlock_irqrestore(&txq->lock, flags); IWL_ERR(trans, "No space in command queue\n"); iwl_op_mode_cmd_queue_full(trans->op_mode); @@ -1174,7 +1175,7 @@ int iwl_pcie_enqueue_hcmd(struct iwl_trans *trans, unlock_reg: spin_unlock(&trans_pcie->reg_lock); out: - spin_unlock_bh(&txq->lock); + spin_unlock_irqrestore(&txq->lock, flags); free_dup_buf: if (idx < 0) kfree(dup_buf); -- cgit v1.2.3 From 8f6a70fd71a3d7a6b120f83681263fc370eb52ba Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Tue, 9 Mar 2021 11:09:03 +0100 Subject: mt76: mt7921: fix airtime reporting Fix {tx,rx}_airtime reporting for mt7921 driver. Wrong register definitions trigger a tx hangs before resetting airtime stats. Fixes: 163f4d22c118d ("mt76: mt7921: add MAC support") Tested-by: Leon Yen Signed-off-by: Lorenzo Bianconi Acked-by: Felix Fietkau Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/c05333be0e3e85a50a71bb2de81034fe425e3701.1615284335.git.lorenzo@kernel.org --- drivers/net/wireless/mediatek/mt76/mt7921/regs.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/regs.h b/drivers/net/wireless/mediatek/mt76/mt7921/regs.h index 18980bb32dee..6dad7f6ab09d 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7921/regs.h +++ b/drivers/net/wireless/mediatek/mt76/mt7921/regs.h @@ -135,10 +135,10 @@ #define MT_WTBLON_TOP_BASE 0x34000 #define MT_WTBLON_TOP(ofs) (MT_WTBLON_TOP_BASE + (ofs)) -#define MT_WTBLON_TOP_WDUCR MT_WTBLON_TOP(0x0) +#define MT_WTBLON_TOP_WDUCR MT_WTBLON_TOP(0x200) #define MT_WTBLON_TOP_WDUCR_GROUP GENMASK(2, 0) -#define MT_WTBL_UPDATE MT_WTBLON_TOP(0x030) +#define MT_WTBL_UPDATE MT_WTBLON_TOP(0x230) #define MT_WTBL_UPDATE_WLAN_IDX GENMASK(9, 0) #define MT_WTBL_UPDATE_ADM_COUNT_CLEAR BIT(12) #define MT_WTBL_UPDATE_BUSY BIT(31) -- cgit v1.2.3 From bd83a2fc05ed323d7ae38443a6d2e253ef1c4237 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 13 Mar 2021 15:36:35 +0100 Subject: brcmfmac: p2p: Fix recently introduced deadlock issue Commit a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver") replaced the rtnl_lock parameter passed to various brcmf functions with just lock, because since that commit it is not just about the rtnl_lock but also about the wiphy_lock . During this search/replace the "if (!rtnl_locked)" check in brcmfmac/p2p.c was accidentally replaced with "if (locked)", dropping the inversion of the check. This causes the code to now call rtnl_lock() while already holding the lock, causing a deadlock. Add back the "!" to the if-condition to fix this. Cc: Johannes Berg Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver") Signed-off-by: Hans de Goede Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20210313143635.109154-1-hdegoede@redhat.com --- drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c index 6d30a0fcecea..34cd8a7401fe 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c @@ -2439,7 +2439,7 @@ void brcmf_p2p_ifp_removed(struct brcmf_if *ifp, bool locked) vif = ifp->vif; cfg = wdev_to_cfg(&vif->wdev); cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL; - if (locked) { + if (!locked) { rtnl_lock(); wiphy_lock(cfg->wiphy); cfg80211_unregister_wdev(&vif->wdev); -- cgit v1.2.3 From 5e4010e36a58978e42b2ee13739ff9b50209c830 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 11 Mar 2021 14:03:18 +0800 Subject: usb: dwc3: qcom: skip interconnect init for ACPI probe The ACPI probe starts failing since commit bea46b981515 ("usb: dwc3: qcom: Add interconnect support in dwc3 driver"), because there is no interconnect support for ACPI, and of_icc_get() call in dwc3_qcom_interconnect_init() will just return -EINVAL. Fix the problem by skipping interconnect init for ACPI probe, and then the NULL icc_path_ddr will simply just scheild all ICC calls. Fixes: bea46b981515 ("usb: dwc3: qcom: Add interconnect support in dwc3 driver") Signed-off-by: Shawn Guo Cc: stable Link: https://lore.kernel.org/r/20210311060318.25418-1-shawn.guo@linaro.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/dwc3-qcom.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c index fcaf04483ad0..3de291ab951a 100644 --- a/drivers/usb/dwc3/dwc3-qcom.c +++ b/drivers/usb/dwc3/dwc3-qcom.c @@ -244,6 +244,9 @@ static int dwc3_qcom_interconnect_init(struct dwc3_qcom *qcom) struct device *dev = qcom->dev; int ret; + if (has_acpi_companion(dev)) + return 0; + qcom->icc_path_ddr = of_icc_get(dev, "usb-ddr"); if (IS_ERR(qcom->icc_path_ddr)) { dev_err(dev, "failed to get usb-ddr path: %ld\n", -- cgit v1.2.3 From cdb651b6021ee091abc24e9fbd9774d318ab96a6 Mon Sep 17 00:00:00 2001 From: Thinh Nguyen Date: Mon, 8 Mar 2021 18:16:44 -0800 Subject: usb: dwc3: gadget: Set gadget_max_speed when set ssp_rate Set the dwc->gadget_max_speed to SuperSpeed Plus if the user sets the ssp_rate. The udc_set_ssp_rate() is intended for setting the gadget's speed to SuperSpeed Plus at the specified rate. Fixes: 072cab8a0fe2 ("usb: dwc3: gadget: Implement setting of SSP rate") Cc: Signed-off-by: Thinh Nguyen Link: https://lore.kernel.org/r/0b2732e2f380d9912ee87f39dc82c2139223bad9.1615254129.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/gadget.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 4a337f348651..006476a4737b 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2523,6 +2523,7 @@ static void dwc3_gadget_set_ssp_rate(struct usb_gadget *g, unsigned long flags; spin_lock_irqsave(&dwc->lock, flags); + dwc->gadget_max_speed = USB_SPEED_SUPER_PLUS; dwc->gadget_ssp_rate = rate; spin_unlock_irqrestore(&dwc->lock, flags); } -- cgit v1.2.3 From 93f1d43c5767d70a1af89f54ef16a7d3e99af048 Mon Sep 17 00:00:00 2001 From: Thinh Nguyen Date: Mon, 8 Mar 2021 18:16:50 -0800 Subject: usb: dwc3: gadget: Use max speed if unspecified If the gadget driver doesn't specify a max_speed, then use the controller's maximum supported speed as default. For DWC_usb32 IP, the gadget's speed maybe limited to gen2x1 rate only if the driver's max_speed is unknown. This scenario should not occur with the current implementation since the default gadget driver's max_speed should always be specified. However, to make the driver more robust and help with readability, let's cover all the scenarios in __dwc3_gadget_set_speed(). Fixes: 450b9e9fabd8 ("usb: dwc3: gadget: Set speed only up to the max supported") Cc: Signed-off-by: Thinh Nguyen Link: https://lore.kernel.org/r/55ac7001af73bfe9bc750c6446ef4ac8cf6f9313.1615254129.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/gadget.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 006476a4737b..4c15c3fce303 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2083,7 +2083,7 @@ static void __dwc3_gadget_set_speed(struct dwc3 *dwc) u32 reg; speed = dwc->gadget_max_speed; - if (speed > dwc->maximum_speed) + if (speed == USB_SPEED_UNKNOWN || speed > dwc->maximum_speed) speed = dwc->maximum_speed; if (speed == USB_SPEED_SUPER_PLUS && -- cgit v1.2.3 From b522f830d35189e0283fa4d5b4b3ef8d7a78cfcb Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 22 Mar 2021 14:52:44 +0200 Subject: usb: dwc3: pci: Enable dis_uX_susphy_quirk for Intel Merrifield It seems that on Intel Merrifield platform the USB PHY shouldn't be suspended. Otherwise it can't be enabled by simply change the cable in the connector. Enable corresponding quirk for the platform in question. Fixes: e5f4ca3fce90 ("usb: dwc3: ulpi: Fix USB2.0 HS/FS/LS PHY suspend regression") Suggested-by: Serge Semin Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20210322125244.79407-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/dwc3-pci.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 3d3918a8d5fb..4c5c6972124a 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -120,6 +120,8 @@ static const struct property_entry dwc3_pci_intel_properties[] = { static const struct property_entry dwc3_pci_mrfld_properties[] = { PROPERTY_ENTRY_STRING("dr_mode", "otg"), PROPERTY_ENTRY_STRING("linux,extcon-name", "mrfld_bcove_pwrsrc"), + PROPERTY_ENTRY_BOOL("snps,dis_u3_susphy_quirk"), + PROPERTY_ENTRY_BOOL("snps,dis_u2_susphy_quirk"), PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"), {} }; -- cgit v1.2.3 From 72035f4954f0bca2d8c47cf31b3629c42116f5b7 Mon Sep 17 00:00:00 2001 From: Tong Zhang Date: Wed, 17 Mar 2021 19:04:00 -0400 Subject: usb: gadget: udc: amd5536udc_pci fix null-ptr-dereference init_dma_pools() calls dma_pool_create(...dev->dev) to create dma pool. however, dev->dev is actually set after calling init_dma_pools(), which effectively makes dma_pool_create(..NULL) and cause crash. To fix this issue, init dma only after dev->dev is set. [ 1.317993] RIP: 0010:dma_pool_create+0x83/0x290 [ 1.323257] Call Trace: [ 1.323390] ? pci_write_config_word+0x27/0x30 [ 1.323626] init_dma_pools+0x41/0x1a0 [snps_udc_core] [ 1.323899] udc_pci_probe+0x202/0x2b1 [amd5536udc_pci] Fixes: 7c51247a1f62 (usb: gadget: udc: Provide correct arguments for 'dma_pool_create') Cc: stable Signed-off-by: Tong Zhang Link: https://lore.kernel.org/r/20210317230400.357756-1-ztong0001@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/udc/amd5536udc_pci.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/udc/amd5536udc_pci.c b/drivers/usb/gadget/udc/amd5536udc_pci.c index 8d387e0e4d91..c80f9bd51b75 100644 --- a/drivers/usb/gadget/udc/amd5536udc_pci.c +++ b/drivers/usb/gadget/udc/amd5536udc_pci.c @@ -153,6 +153,11 @@ static int udc_pci_probe( pci_set_master(pdev); pci_try_set_mwi(pdev); + dev->phys_addr = resource; + dev->irq = pdev->irq; + dev->pdev = pdev; + dev->dev = &pdev->dev; + /* init dma pools */ if (use_dma) { retval = init_dma_pools(dev); @@ -160,11 +165,6 @@ static int udc_pci_probe( goto err_dma; } - dev->phys_addr = resource; - dev->irq = pdev->irq; - dev->pdev = pdev; - dev->dev = &pdev->dev; - /* general probing */ if (udc_probe(dev)) { retval = -ENODEV; -- cgit v1.2.3 From 08dff274edda54310d6f1cf27b62fddf0f8d146e Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 11 Mar 2021 14:37:14 +0100 Subject: cdc-acm: fix BREAK rx code path adding necessary calls Counting break events is nice but we should actually report them to the tty layer. Fixes: 5a6a62bdb9257 ("cdc-acm: add TIOCMIWAIT") Signed-off-by: Oliver Neukum Link: https://lore.kernel.org/r/20210311133714.31881-1-oneukum@suse.com Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 39ddb5585ded..b013671261a2 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -313,8 +313,10 @@ static void acm_process_notification(struct acm *acm, unsigned char *buf) acm->iocount.dsr++; if (difference & ACM_CTRL_DCD) acm->iocount.dcd++; - if (newctrl & ACM_CTRL_BRK) + if (newctrl & ACM_CTRL_BRK) { acm->iocount.brk++; + tty_insert_flip_char(&acm->port, 0, TTY_BREAK); + } if (newctrl & ACM_CTRL_RI) acm->iocount.rng++; if (newctrl & ACM_CTRL_FRAMING) -- cgit v1.2.3 From 6069e3e927c8fb3a1947b07d1a561644ea960248 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 11 Mar 2021 14:01:25 +0100 Subject: USB: cdc-acm: untangle a circular dependency between callback and softint We have a cycle of callbacks scheduling works which submit URBs with thos callbacks. This needs to be blocked, stopped and unblocked to untangle the circle. The issue leads to faults like: [ 55.068392] Unable to handle kernel paging request at virtual address 6b6b6c03 [ 55.075624] pgd = be866494 [ 55.078335] [6b6b6c03] *pgd=00000000 [ 55.081924] Internal error: Oops: 5 [#1] PREEMPT SMP ARM [ 55.087238] Modules linked in: ppp_async crc_ccitt ppp_generic slhc xt_TCPMSS xt_tcpmss xt_hl nf_log_ipv6 nf_log_ipv4 nf_log_common xt_policy xt_limit xt_conntrack xt_tcpudp xt_pkttype ip6table_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_mangle ip6table_filter ip6_tables iptable_filter ip_tables des_generic md5 sch_fq_codel cdc_mbim cdc_wdm cdc_ncm usbnet mii cdc_acm usb_storage ip_tunnel xfrm_user xfrm6_tunnel tunnel6 xfrm4_tunnel tunnel4 esp6 esp4 ah6 ah4 xfrm_algo xt_LOG xt_LED xt_comment x_tables ipv6 [ 55.134954] CPU: 0 PID: 82 Comm: kworker/0:2 Tainted: G T 5.8.17 #1 [ 55.142526] Hardware name: Freescale i.MX7 Dual (Device Tree) [ 55.148304] Workqueue: events acm_softint [cdc_acm] [ 55.153196] PC is at kobject_get+0x10/0xa4 [ 55.157302] LR is at usb_get_dev+0x14/0x1c [ 55.161402] pc : [<8047c06c>] lr : [<80560448>] psr: 20000193 [ 55.167671] sp : bca39ea8 ip : 00007374 fp : bf6cbd80 [ 55.172899] r10: 00000000 r9 : bdd92284 r8 : bdd92008 [ 55.178128] r7 : 6b6b6b6b r6 : fffffffe r5 : 60000113 r4 : 6b6b6be3 [ 55.184658] r3 : 6b6b6b6b r2 : 00000111 r1 : 00000000 r0 : 6b6b6be3 [ 55.191191] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 55.198417] Control: 10c5387d Table: bcf0c06a DAC: 00000051 [ 55.204168] Process kworker/0:2 (pid: 82, stack limit = 0x9bdd2a89) [ 55.210439] Stack: (0xbca39ea8 to 0xbca3a000) [ 55.214805] 9ea0: bf6cbd80 80769a50 6b6b6b6b 80560448 bdeb0500 8056bfe8 [ 55.222991] 9ec0: 00000002 b76da000 00000000 bdeb0500 bdd92448 bca38000 bdeb0510 8056d69c [ 55.231177] 9ee0: bca38000 00000000 80c050fc 00000000 bca39f44 09d42015 00000000 00000001 [ 55.239363] 9f00: bdd92448 bdd92438 bdd92000 7f1158c4 bdd92448 bca2ee00 bf6cbd80 bf6cef00 [ 55.247549] 9f20: 00000000 00000000 00000000 801412d8 bf6cbd98 80c03d00 bca2ee00 bf6cbd80 [ 55.255735] 9f40: bca2ee14 bf6cbd98 80c03d00 00000008 bca38000 80141568 00000000 80c446ae [ 55.263921] 9f60: 00000000 bc9ed880 bc9f0700 bca38000 bc117eb4 80141524 bca2ee00 bc9ed8a4 [ 55.272107] 9f80: 00000000 80147cc8 00000000 bc9f0700 80147b84 00000000 00000000 00000000 [ 55.280292] 9fa0: 00000000 00000000 00000000 80100148 00000000 00000000 00000000 00000000 [ 55.288477] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 55.296662] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [ 55.304860] [<8047c06c>] (kobject_get) from [<80560448>] (usb_get_dev+0x14/0x1c) [ 55.312271] [<80560448>] (usb_get_dev) from [<8056bfe8>] (usb_hcd_unlink_urb+0x50/0xd8) [ 55.320286] [<8056bfe8>] (usb_hcd_unlink_urb) from [<8056d69c>] (usb_kill_urb.part.0+0x44/0xd0) [ 55.329004] [<8056d69c>] (usb_kill_urb.part.0) from [<7f1158c4>] (acm_softint+0x4c/0x10c [cdc_acm]) [ 55.338082] [<7f1158c4>] (acm_softint [cdc_acm]) from [<801412d8>] (process_one_work+0x19c/0x3e8) [ 55.346969] [<801412d8>] (process_one_work) from [<80141568>] (worker_thread+0x44/0x4dc) [ 55.355072] [<80141568>] (worker_thread) from [<80147cc8>] (kthread+0x144/0x180) [ 55.362481] [<80147cc8>] (kthread) from [<80100148>] (ret_from_fork+0x14/0x2c) [ 55.369706] Exception stack(0xbca39fb0 to 0xbca39ff8) Tested-by: Bruno Thomsen Signed-off-by: Oliver Neukum Cc: stable Link: https://lore.kernel.org/r/20210311130126.15972-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 48 ++++++++++++++++++++++++++++++--------------- 1 file changed, 32 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index b013671261a2..d684cf94b1c0 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -147,17 +147,29 @@ static inline int acm_set_control(struct acm *acm, int control) #define acm_send_break(acm, ms) \ acm_ctrl_msg(acm, USB_CDC_REQ_SEND_BREAK, ms, NULL, 0) -static void acm_kill_urbs(struct acm *acm) +static void acm_poison_urbs(struct acm *acm) { int i; - usb_kill_urb(acm->ctrlurb); + usb_poison_urb(acm->ctrlurb); for (i = 0; i < ACM_NW; i++) - usb_kill_urb(acm->wb[i].urb); + usb_poison_urb(acm->wb[i].urb); for (i = 0; i < acm->rx_buflimit; i++) - usb_kill_urb(acm->read_urbs[i]); + usb_poison_urb(acm->read_urbs[i]); +} + +static void acm_unpoison_urbs(struct acm *acm) +{ + int i; + + for (i = 0; i < acm->rx_buflimit; i++) + usb_unpoison_urb(acm->read_urbs[i]); + for (i = 0; i < ACM_NW; i++) + usb_unpoison_urb(acm->wb[i].urb); + usb_unpoison_urb(acm->ctrlurb); } + /* * Write buffer management. * All of these assume proper locks taken by the caller. @@ -226,9 +238,10 @@ static int acm_start_wb(struct acm *acm, struct acm_wb *wb) rc = usb_submit_urb(wb->urb, GFP_ATOMIC); if (rc < 0) { - dev_err(&acm->data->dev, - "%s - usb_submit_urb(write bulk) failed: %d\n", - __func__, rc); + if (rc != -EPERM) + dev_err(&acm->data->dev, + "%s - usb_submit_urb(write bulk) failed: %d\n", + __func__, rc); acm_write_done(acm, wb); } return rc; @@ -482,11 +495,6 @@ static void acm_read_bulk_callback(struct urb *urb) dev_vdbg(&acm->data->dev, "got urb %d, len %d, status %d\n", rb->index, urb->actual_length, status); - if (!acm->dev) { - dev_dbg(&acm->data->dev, "%s - disconnected\n", __func__); - return; - } - switch (status) { case 0: usb_mark_last_busy(acm->dev); @@ -733,6 +741,7 @@ static void acm_port_shutdown(struct tty_port *port) * Need to grab write_lock to prevent race with resume, but no need to * hold it due to the tty-port initialised flag. */ + acm_poison_urbs(acm); spin_lock_irq(&acm->write_lock); spin_unlock_irq(&acm->write_lock); @@ -749,7 +758,8 @@ static void acm_port_shutdown(struct tty_port *port) usb_autopm_put_interface_async(acm->control); } - acm_kill_urbs(acm); + acm_unpoison_urbs(acm); + } static void acm_tty_cleanup(struct tty_struct *tty) @@ -1542,8 +1552,14 @@ static void acm_disconnect(struct usb_interface *intf) if (!acm) return; - mutex_lock(&acm->mutex); acm->disconnected = true; + /* + * there is a circular dependency. acm_softint() can resubmit + * the URBs in error handling so we need to block any + * submission right away + */ + acm_poison_urbs(acm); + mutex_lock(&acm->mutex); if (acm->country_codes) { device_remove_file(&acm->control->dev, &dev_attr_wCountryCodes); @@ -1562,7 +1578,6 @@ static void acm_disconnect(struct usb_interface *intf) tty_kref_put(tty); } - acm_kill_urbs(acm); cancel_delayed_work_sync(&acm->dwork); tty_unregister_device(acm_tty_driver, acm->minor); @@ -1604,7 +1619,7 @@ static int acm_suspend(struct usb_interface *intf, pm_message_t message) if (cnt) return 0; - acm_kill_urbs(acm); + acm_poison_urbs(acm); cancel_delayed_work_sync(&acm->dwork); acm->urbs_in_error_delay = 0; @@ -1617,6 +1632,7 @@ static int acm_resume(struct usb_interface *intf) struct urb *urb; int rv = 0; + acm_unpoison_urbs(acm); spin_lock_irq(&acm->write_lock); if (--acm->susp_count) -- cgit v1.2.3 From e4c77070ad45fc940af1d7fb1e637c349e848951 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 11 Mar 2021 14:01:26 +0100 Subject: USB: cdc-acm: downgrade message to debug This failure is so common that logging an error here amounts to spamming log files. Reviewed-by: Bruno Thomsen Signed-off-by: Oliver Neukum Cc: stable Link: https://lore.kernel.org/r/20210311130126.15972-2-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index d684cf94b1c0..fd2fce072985 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -659,7 +659,8 @@ static void acm_port_dtr_rts(struct tty_port *port, int raise) res = acm_set_control(acm, val); if (res && (acm->ctrl_caps & USB_CDC_CAP_LINE)) - dev_err(&acm->control->dev, "failed to set dtr/rts\n"); + /* This is broken in too many devices to spam the logs */ + dev_dbg(&acm->control->dev, "failed to set dtr/rts\n"); } static int acm_port_activate(struct tty_port *port, struct tty_struct *tty) -- cgit v1.2.3 From 3f3a9bc1f6df5a1a9ec39e3a5bee420328811be4 Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Wed, 17 Mar 2021 20:48:59 +0200 Subject: drm/i915/ilk-glk: Fix link training on links with LTTPRs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The spec requires to use at least 3.2ms for the AUX timeout period if there are LT-tunable PHY Repeaters on the link (2.11.2). An upcoming spec update makes this more specific, by requiring a 3.2ms minimum timeout period for the LTTPR detection reading the 0xF0000-0xF0007 range (3.6.5.1). Accordingly disable LTTPR detection until GLK, where the maximum timeout we can set is only 1.6ms. Link training in the non-transparent mode is known to fail at least on some SKL systems with a WD19 dock on the link, which exposes an LTTPR (see the References below). While this could have different reasons besides the too short AUX timeout used, not detecting LTTPRs (and so not using the non-transparent LT mode) fixes link training on these systems. While at it add a code comment about the platform specific maximum timeout values. v2: Add a comment about the g4x maximum timeout as well. (Ville) Reported-by: Takashi Iwai Reported-and-tested-by: Santiago Zarate Reported-and-tested-by: Bodo Graumann References: https://gitlab.freedesktop.org/drm/intel/-/issues/3166 Fixes: b30edfd8d0b4 ("drm/i915: Switch to LTTPR non-transparent mode link training") Cc: # v5.11 Cc: Takashi Iwai Cc: Ville Syrjälä Signed-off-by: Imre Deak Reviewed-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20210317184901.4029798-2-imre.deak@intel.com (cherry picked from commit 984982f3ef7b240cd24c2feb2762d81d9d8da3c2) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/display/intel_dp_aux.c | 7 +++++++ drivers/gpu/drm/i915/display/intel_dp_link_training.c | 15 ++++++++++++--- 2 files changed, 19 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/display/intel_dp_aux.c b/drivers/gpu/drm/i915/display/intel_dp_aux.c index eaebf123310a..10fe17b7280d 100644 --- a/drivers/gpu/drm/i915/display/intel_dp_aux.c +++ b/drivers/gpu/drm/i915/display/intel_dp_aux.c @@ -133,6 +133,7 @@ static u32 g4x_get_aux_send_ctl(struct intel_dp *intel_dp, else precharge = 5; + /* Max timeout value on G4x-BDW: 1.6ms */ if (IS_BROADWELL(dev_priv)) timeout = DP_AUX_CH_CTL_TIME_OUT_600us; else @@ -159,6 +160,12 @@ static u32 skl_get_aux_send_ctl(struct intel_dp *intel_dp, enum phy phy = intel_port_to_phy(i915, dig_port->base.port); u32 ret; + /* + * Max timeout values: + * SKL-GLK: 1.6ms + * CNL: 3.2ms + * ICL+: 4ms + */ ret = DP_AUX_CH_CTL_SEND_BUSY | DP_AUX_CH_CTL_DONE | DP_AUX_CH_CTL_INTERRUPT | diff --git a/drivers/gpu/drm/i915/display/intel_dp_link_training.c b/drivers/gpu/drm/i915/display/intel_dp_link_training.c index 892d7db7d94f..35cda72492d7 100644 --- a/drivers/gpu/drm/i915/display/intel_dp_link_training.c +++ b/drivers/gpu/drm/i915/display/intel_dp_link_training.c @@ -81,6 +81,18 @@ static void intel_dp_read_lttpr_phy_caps(struct intel_dp *intel_dp, static bool intel_dp_read_lttpr_common_caps(struct intel_dp *intel_dp) { + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + + if (intel_dp_is_edp(intel_dp)) + return false; + + /* + * Detecting LTTPRs must be avoided on platforms with an AUX timeout + * period < 3.2ms. (see DP Standard v2.0, 2.11.2, 3.6.6.1). + */ + if (INTEL_GEN(i915) < 10) + return false; + if (drm_dp_read_lttpr_common_caps(&intel_dp->aux, intel_dp->lttpr_common_caps) < 0) { memset(intel_dp->lttpr_common_caps, 0, @@ -126,9 +138,6 @@ int intel_dp_lttpr_init(struct intel_dp *intel_dp) bool ret; int i; - if (intel_dp_is_edp(intel_dp)) - return 0; - ret = intel_dp_read_lttpr_common_caps(intel_dp); if (!ret) return 0; -- cgit v1.2.3 From 7dffbdedb96a076843719d4ea5b2cd666481c416 Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Wed, 17 Mar 2021 21:01:49 +0200 Subject: drm/i915: Disable LTTPR support when the DPCD rev < 1.4 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit By the specification the 0xF0000-0xF02FF range is only valid when the DPCD revision is 1.4 or higher. Disable LTTPR support if this isn't so. Trying to detect LTTPRs returned corrupted values for the above DPCD range at least on a Skylake host with an LG 43UD79-B monitor with a DPCD revision 1.2 connected. v2: Add the actual version check. v3: Fix s/DRPX/DPRX/ typo. Fixes: 7b2a4ab8b0ef ("drm/i915: Switch to LTTPR transparent mode link training") Cc: # v5.11 Cc: Ville Syrjälä Signed-off-by: Imre Deak Reviewed-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20210317190149.4032966-1-imre.deak@intel.com (cherry picked from commit 264613b406eb0d74cd9ca582c717c5e2c5a975ea) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/display/intel_dp.c | 4 +- .../gpu/drm/i915/display/intel_dp_link_training.c | 48 +++++++++++++++++----- .../gpu/drm/i915/display/intel_dp_link_training.h | 2 +- 3 files changed, 39 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c index 8c12d5375607..775d89b6c3fc 100644 --- a/drivers/gpu/drm/i915/display/intel_dp.c +++ b/drivers/gpu/drm/i915/display/intel_dp.c @@ -3619,9 +3619,7 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp) { int ret; - intel_dp_lttpr_init(intel_dp); - - if (drm_dp_read_dpcd_caps(&intel_dp->aux, intel_dp->dpcd)) + if (intel_dp_init_lttpr_and_dprx_caps(intel_dp) < 0) return false; /* diff --git a/drivers/gpu/drm/i915/display/intel_dp_link_training.c b/drivers/gpu/drm/i915/display/intel_dp_link_training.c index 35cda72492d7..c10e81a3d64f 100644 --- a/drivers/gpu/drm/i915/display/intel_dp_link_training.c +++ b/drivers/gpu/drm/i915/display/intel_dp_link_training.c @@ -34,6 +34,11 @@ intel_dp_dump_link_status(const u8 link_status[DP_LINK_STATUS_SIZE]) link_status[3], link_status[4], link_status[5]); } +static void intel_dp_reset_lttpr_common_caps(struct intel_dp *intel_dp) +{ + memset(&intel_dp->lttpr_common_caps, 0, sizeof(intel_dp->lttpr_common_caps)); +} + static void intel_dp_reset_lttpr_count(struct intel_dp *intel_dp) { intel_dp->lttpr_common_caps[DP_PHY_REPEATER_CNT - @@ -95,8 +100,7 @@ static bool intel_dp_read_lttpr_common_caps(struct intel_dp *intel_dp) if (drm_dp_read_lttpr_common_caps(&intel_dp->aux, intel_dp->lttpr_common_caps) < 0) { - memset(intel_dp->lttpr_common_caps, 0, - sizeof(intel_dp->lttpr_common_caps)); + intel_dp_reset_lttpr_common_caps(intel_dp); return false; } @@ -118,30 +122,49 @@ intel_dp_set_lttpr_transparent_mode(struct intel_dp *intel_dp, bool enable) } /** - * intel_dp_lttpr_init - detect LTTPRs and init the LTTPR link training mode + * intel_dp_init_lttpr_and_dprx_caps - detect LTTPR and DPRX caps, init the LTTPR link training mode * @intel_dp: Intel DP struct * - * Read the LTTPR common capabilities, switch to non-transparent link training - * mode if any is detected and read the PHY capabilities for all detected - * LTTPRs. In case of an LTTPR detection error or if the number of + * Read the LTTPR common and DPRX capabilities and switch to non-transparent + * link training mode if any is detected and read the PHY capabilities for all + * detected LTTPRs. In case of an LTTPR detection error or if the number of * LTTPRs is more than is supported (8), fall back to the no-LTTPR, * transparent mode link training mode. * * Returns: - * >0 if LTTPRs were detected and the non-transparent LT mode was set + * >0 if LTTPRs were detected and the non-transparent LT mode was set. The + * DPRX capabilities are read out. * 0 if no LTTPRs or more than 8 LTTPRs were detected or in case of a - * detection failure and the transparent LT mode was set + * detection failure and the transparent LT mode was set. The DPRX + * capabilities are read out. + * <0 Reading out the DPRX capabilities failed. */ -int intel_dp_lttpr_init(struct intel_dp *intel_dp) +int intel_dp_init_lttpr_and_dprx_caps(struct intel_dp *intel_dp) { int lttpr_count; bool ret; int i; ret = intel_dp_read_lttpr_common_caps(intel_dp); + + /* The DPTX shall read the DPRX caps after LTTPR detection. */ + if (drm_dp_read_dpcd_caps(&intel_dp->aux, intel_dp->dpcd)) { + intel_dp_reset_lttpr_common_caps(intel_dp); + return -EIO; + } + if (!ret) return 0; + /* + * The 0xF0000-0xF02FF range is only valid if the DPCD revision is + * at least 1.4. + */ + if (intel_dp->dpcd[DP_DPCD_REV] < 0x14) { + intel_dp_reset_lttpr_common_caps(intel_dp); + return 0; + } + lttpr_count = drm_dp_lttpr_count(intel_dp->lttpr_common_caps); /* * Prevent setting LTTPR transparent mode explicitly if no LTTPRs are @@ -181,7 +204,7 @@ int intel_dp_lttpr_init(struct intel_dp *intel_dp) return lttpr_count; } -EXPORT_SYMBOL(intel_dp_lttpr_init); +EXPORT_SYMBOL(intel_dp_init_lttpr_and_dprx_caps); static u8 dp_voltage_max(u8 preemph) { @@ -816,7 +839,10 @@ void intel_dp_start_link_train(struct intel_dp *intel_dp, * TODO: Reiniting LTTPRs here won't be needed once proper connector * HW state readout is added. */ - int lttpr_count = intel_dp_lttpr_init(intel_dp); + int lttpr_count = intel_dp_init_lttpr_and_dprx_caps(intel_dp); + + if (lttpr_count < 0) + return; if (!intel_dp_link_train_all_phys(intel_dp, crtc_state, lttpr_count)) intel_dp_schedule_fallback_link_training(intel_dp, crtc_state); diff --git a/drivers/gpu/drm/i915/display/intel_dp_link_training.h b/drivers/gpu/drm/i915/display/intel_dp_link_training.h index 6a1f76bd8c75..9cb7c28027f0 100644 --- a/drivers/gpu/drm/i915/display/intel_dp_link_training.h +++ b/drivers/gpu/drm/i915/display/intel_dp_link_training.h @@ -11,7 +11,7 @@ struct intel_crtc_state; struct intel_dp; -int intel_dp_lttpr_init(struct intel_dp *intel_dp); +int intel_dp_init_lttpr_and_dprx_caps(struct intel_dp *intel_dp); void intel_dp_get_adjust_train(struct intel_dp *intel_dp, const struct intel_crtc_state *crtc_state, -- cgit v1.2.3 From ab03631087f5c296030dd86265ea02dcdacc6802 Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Wed, 17 Mar 2021 20:49:01 +0200 Subject: drm/i915: Disable LTTPR support when the LTTPR rev < 1.4 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit By the specification the 0xF0000 - 0xF02FF range is only valid if the LTTPR revision at 0xF0000 is at least 1.4. Disable the LTTPR support otherwise. Fixes: 7b2a4ab8b0ef ("drm/i915: Switch to LTTPR transparent mode link training") Cc: # v5.11 Cc: Ville Syrjälä Signed-off-by: Imre Deak Reviewed-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20210317184901.4029798-4-imre.deak@intel.com (cherry picked from commit 1663ad4936e0679443a315fe342f99636a2420dd) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/display/intel_dp_link_training.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/display/intel_dp_link_training.c b/drivers/gpu/drm/i915/display/intel_dp_link_training.c index c10e81a3d64f..be6ac0dd846e 100644 --- a/drivers/gpu/drm/i915/display/intel_dp_link_training.c +++ b/drivers/gpu/drm/i915/display/intel_dp_link_training.c @@ -99,17 +99,23 @@ static bool intel_dp_read_lttpr_common_caps(struct intel_dp *intel_dp) return false; if (drm_dp_read_lttpr_common_caps(&intel_dp->aux, - intel_dp->lttpr_common_caps) < 0) { - intel_dp_reset_lttpr_common_caps(intel_dp); - return false; - } + intel_dp->lttpr_common_caps) < 0) + goto reset_caps; drm_dbg_kms(&dp_to_i915(intel_dp)->drm, "LTTPR common capabilities: %*ph\n", (int)sizeof(intel_dp->lttpr_common_caps), intel_dp->lttpr_common_caps); + /* The minimum value of LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV is 1.4 */ + if (intel_dp->lttpr_common_caps[0] < 0x14) + goto reset_caps; + return true; + +reset_caps: + intel_dp_reset_lttpr_common_caps(intel_dp); + return false; } static bool -- cgit v1.2.3 From ff2628ed95e42d5245119eed3c1f669db9222285 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Fri, 5 Mar 2021 17:36:05 +0200 Subject: drm/i915: Fix enabled_planes bitmask MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The enabled_planes bitmask was supposed to track logically enabled planes (ie. fb!=NULL and crtc!=NULL), but instead we end up putting even disabled planes into the bitmask since intel_plane_atomic_check_with_state() only takes the early exit if the plane was disabled and stays disabled. I think I misread the early said codepath to exit whenever the plane is logically disabled, which is not true. So let's fix this up properly and set the bit only when the plane actually is logically enabled. Cc: Manasi Navare Fixes: ee42ec19ca2e ("drm/i915: Track logically enabled planes for hw state") Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20210305153610.12177-2-ville.syrjala@linux.intel.com Reviewed-by: Manasi Navare (cherry picked from commit 97bc7ffa1b1e9a8672e0a8e9a96680b0c3717427) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/display/intel_atomic_plane.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/display/intel_atomic_plane.c b/drivers/gpu/drm/i915/display/intel_atomic_plane.c index 4683f98f7e54..c3f2962aa1eb 100644 --- a/drivers/gpu/drm/i915/display/intel_atomic_plane.c +++ b/drivers/gpu/drm/i915/display/intel_atomic_plane.c @@ -317,12 +317,13 @@ int intel_plane_atomic_check_with_state(const struct intel_crtc_state *old_crtc_ if (!new_plane_state->hw.crtc && !old_plane_state->hw.crtc) return 0; - new_crtc_state->enabled_planes |= BIT(plane->id); - ret = plane->check_plane(new_crtc_state, new_plane_state); if (ret) return ret; + if (fb) + new_crtc_state->enabled_planes |= BIT(plane->id); + /* FIXME pre-g4x don't work like this */ if (new_plane_state->uapi.visible) new_crtc_state->active_planes |= BIT(plane->id); -- cgit v1.2.3 From b61fde1beb6b1847f1743e75f4d9839acebad76a Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Fri, 19 Mar 2021 13:53:33 +0200 Subject: drm/i915/dsc: fix DSS CTL register usage for ICL DSI transcoders Use the correct DSS CTL registers for ICL DSI transcoders. As a side effect, this also brings back the sanity check for trying to use pipe DSC registers on pipe A on ICL. Fixes: 8a029c113b17 ("drm/i915/dp: Modify VDSC helpers to configure DSC for Bigjoiner slave") References: http://lore.kernel.org/r/87eegxq2lq.fsf@intel.com Cc: Manasi Navare Cc: Animesh Manna Cc: Vandita Kulkarni Cc: # v5.11+ Reviewed-by: Manasi Navare Signed-off-by: Jani Nikula Link: https://patchwork.freedesktop.org/patch/msgid/20210319115333.8330-1-jani.nikula@intel.com (cherry picked from commit 5706d02871240fdba7ddd6ab1cc31672fc95a90f) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/display/intel_vdsc.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/display/intel_vdsc.c b/drivers/gpu/drm/i915/display/intel_vdsc.c index f58cc5700784..a86c57d117f2 100644 --- a/drivers/gpu/drm/i915/display/intel_vdsc.c +++ b/drivers/gpu/drm/i915/display/intel_vdsc.c @@ -1014,20 +1014,14 @@ static i915_reg_t dss_ctl1_reg(const struct intel_crtc_state *crtc_state) { enum pipe pipe = to_intel_crtc(crtc_state->uapi.crtc)->pipe; - if (crtc_state->cpu_transcoder == TRANSCODER_EDP) - return DSS_CTL1; - - return ICL_PIPE_DSS_CTL1(pipe); + return is_pipe_dsc(crtc_state) ? ICL_PIPE_DSS_CTL1(pipe) : DSS_CTL1; } static i915_reg_t dss_ctl2_reg(const struct intel_crtc_state *crtc_state) { enum pipe pipe = to_intel_crtc(crtc_state->uapi.crtc)->pipe; - if (crtc_state->cpu_transcoder == TRANSCODER_EDP) - return DSS_CTL2; - - return ICL_PIPE_DSS_CTL2(pipe); + return is_pipe_dsc(crtc_state) ? ICL_PIPE_DSS_CTL2(pipe) : DSS_CTL2; } void intel_dsc_enable(struct intel_encoder *encoder, -- cgit v1.2.3 From 7180495cb3d0e2a2860d282a468b4146c21da78f Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 22 Mar 2021 16:53:11 +0100 Subject: USB: cdc-acm: fix double free on probe failure If tty-device registration fails the driver copy of any Country Selection functional descriptor would end up being freed twice; first explicitly in the error path and then again in the tty-port destructor. Drop the first erroneous free that was left when fixing a tty-port resource leak. Fixes: cae2bc768d17 ("usb: cdc-acm: Decrement tty port's refcount if probe() fail") Cc: stable@vger.kernel.org # 4.19 Cc: Jaejoong Kim Acked-by: Oliver Neukum Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210322155318.9837-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index fd2fce072985..d5fbb943c4c1 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1521,7 +1521,6 @@ alloc_fail6: &dev_attr_wCountryCodes); device_remove_file(&acm->control->dev, &dev_attr_iCountryCodeRelDate); - kfree(acm->country_codes); } device_remove_file(&acm->control->dev, &dev_attr_bmCapabilities); alloc_fail5: -- cgit v1.2.3 From 4e49bf376c0451ad2eae2592e093659cde12be9a Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 22 Mar 2021 16:53:12 +0100 Subject: USB: cdc-acm: fix use-after-free after probe failure If tty-device registration fails the driver would fail to release the data interface. When the device is later disconnected, the disconnect callback would still be called for the data interface and would go about releasing already freed resources. Fixes: c93d81955005 ("usb: cdc-acm: fix error handling in acm_probe()") Cc: stable@vger.kernel.org # 3.9 Cc: Alexey Khoroshilov Acked-by: Oliver Neukum Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210322155318.9837-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index d5fbb943c4c1..6decf8f2b9ae 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1516,6 +1516,11 @@ skip_countries: return 0; alloc_fail6: + if (!acm->combined_interfaces) { + /* Clear driver data so that disconnect() returns early. */ + usb_set_intfdata(data_interface, NULL); + usb_driver_release_interface(&acm_driver, data_interface); + } if (acm->country_codes) { device_remove_file(&acm->control->dev, &dev_attr_wCountryCodes); -- cgit v1.2.3 From 8111a8cbd5dde0b6ea8c388ff4840d4e465b5edd Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 22 Mar 2021 16:53:13 +0100 Subject: USB: cdc-acm: drop redundant driver-data assignment The interface driver data has already been set by usb_driver_claim_interface() so drop the redundant subsequent assignment. Acked-by: Oliver Neukum Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210322155318.9837-4-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 6decf8f2b9ae..d73570d31ed8 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1500,7 +1500,6 @@ skip_countries: acm_set_line(acm, &acm->line); usb_driver_claim_interface(&acm_driver, data_interface, acm); - usb_set_intfdata(data_interface, acm); tty_dev = tty_port_register_device(&acm->port, acm_tty_driver, minor, &control_interface->dev); -- cgit v1.2.3 From dda6faaa2bdadc56b9ad034602307a51d11e26a7 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 22 Mar 2021 16:53:14 +0100 Subject: USB: cdc-acm: drop redundant driver-data reset There's no need to clear the interface driver data on failed probe (and driver core will clear it anyway). Acked-by: Oliver Neukum Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210322155318.9837-5-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index d73570d31ed8..104e10b4ebfa 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1528,7 +1528,6 @@ alloc_fail6: } device_remove_file(&acm->control->dev, &dev_attr_bmCapabilities); alloc_fail5: - usb_set_intfdata(intf, NULL); for (i = 0; i < ACM_NW; i++) usb_free_urb(acm->wb[i].urb); alloc_fail4: -- cgit v1.2.3 From 4cde059acd11e79b205525e5fd66175d8576ec88 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 22 Mar 2021 16:53:15 +0100 Subject: USB: cdc-acm: clean up probe error labels Name the probe error labels after what they do rather than using sequence numbers which is harder to review and maintain (e.g. may require renaming unrelated labels when a label is added or removed). Acked-by: Oliver Neukum Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210322155318.9837-6-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 35 ++++++++++++++++++----------------- 1 file changed, 18 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 104e10b4ebfa..4844f50e54de 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1337,7 +1337,7 @@ made_compressed_probe: acm = kzalloc(sizeof(struct acm), GFP_KERNEL); if (acm == NULL) - goto alloc_fail; + return -ENOMEM; tty_port_init(&acm->port); acm->port.ops = &acm_port_ops; @@ -1354,7 +1354,7 @@ made_compressed_probe: minor = acm_alloc_minor(acm); if (minor < 0) - goto alloc_fail1; + goto err_put_port; acm->minor = minor; acm->dev = usb_dev; @@ -1385,15 +1385,15 @@ made_compressed_probe: buf = usb_alloc_coherent(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma); if (!buf) - goto alloc_fail1; + goto err_put_port; acm->ctrl_buffer = buf; if (acm_write_buffers_alloc(acm) < 0) - goto alloc_fail2; + goto err_free_ctrl_buffer; acm->ctrlurb = usb_alloc_urb(0, GFP_KERNEL); if (!acm->ctrlurb) - goto alloc_fail3; + goto err_free_write_buffers; for (i = 0; i < num_rx_buf; i++) { struct acm_rb *rb = &(acm->read_buffers[i]); @@ -1402,13 +1402,13 @@ made_compressed_probe: rb->base = usb_alloc_coherent(acm->dev, readsize, GFP_KERNEL, &rb->dma); if (!rb->base) - goto alloc_fail4; + goto err_free_read_urbs; rb->index = i; rb->instance = acm; urb = usb_alloc_urb(0, GFP_KERNEL); if (!urb) - goto alloc_fail4; + goto err_free_read_urbs; urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; urb->transfer_dma = rb->dma; @@ -1430,7 +1430,7 @@ made_compressed_probe: snd->urb = usb_alloc_urb(0, GFP_KERNEL); if (snd->urb == NULL) - goto alloc_fail5; + goto err_free_write_urbs; if (usb_endpoint_xfer_int(epwrite)) usb_fill_int_urb(snd->urb, usb_dev, acm->out, @@ -1448,7 +1448,7 @@ made_compressed_probe: i = device_create_file(&intf->dev, &dev_attr_bmCapabilities); if (i < 0) - goto alloc_fail5; + goto err_free_write_urbs; if (h.usb_cdc_country_functional_desc) { /* export the country data */ struct usb_cdc_country_functional_desc * cfd = @@ -1505,7 +1505,7 @@ skip_countries: &control_interface->dev); if (IS_ERR(tty_dev)) { rv = PTR_ERR(tty_dev); - goto alloc_fail6; + goto err_release_data_interface; } if (quirks & CLEAR_HALT_CONDITIONS) { @@ -1514,7 +1514,8 @@ skip_countries: } return 0; -alloc_fail6: + +err_release_data_interface: if (!acm->combined_interfaces) { /* Clear driver data so that disconnect() returns early. */ usb_set_intfdata(data_interface, NULL); @@ -1527,21 +1528,21 @@ alloc_fail6: &dev_attr_iCountryCodeRelDate); } device_remove_file(&acm->control->dev, &dev_attr_bmCapabilities); -alloc_fail5: +err_free_write_urbs: for (i = 0; i < ACM_NW; i++) usb_free_urb(acm->wb[i].urb); -alloc_fail4: +err_free_read_urbs: for (i = 0; i < num_rx_buf; i++) usb_free_urb(acm->read_urbs[i]); acm_read_buffers_free(acm); usb_free_urb(acm->ctrlurb); -alloc_fail3: +err_free_write_buffers: acm_write_buffers_free(acm); -alloc_fail2: +err_free_ctrl_buffer: usb_free_coherent(usb_dev, ctrlsize, acm->ctrl_buffer, acm->ctrl_dma); -alloc_fail1: +err_put_port: tty_port_put(&acm->port); -alloc_fail: + return rv; } -- cgit v1.2.3 From f8255ee192e92fdb885a9ff6bc90d74f5bfb7cd6 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 22 Mar 2021 16:53:16 +0100 Subject: USB: cdc-acm: use negation for NULL checks Use negation consistently throughout the driver for NULL checks. Acked-by: Oliver Neukum Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210322155318.9837-7-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 4844f50e54de..1f0fcabef5d2 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1336,7 +1336,7 @@ made_compressed_probe: dev_dbg(&intf->dev, "interfaces are valid\n"); acm = kzalloc(sizeof(struct acm), GFP_KERNEL); - if (acm == NULL) + if (!acm) return -ENOMEM; tty_port_init(&acm->port); @@ -1429,7 +1429,7 @@ made_compressed_probe: struct acm_wb *snd = &(acm->wb[i]); snd->urb = usb_alloc_urb(0, GFP_KERNEL); - if (snd->urb == NULL) + if (!snd->urb) goto err_free_write_urbs; if (usb_endpoint_xfer_int(epwrite)) -- cgit v1.2.3 From 0b2b23ca20ac9329d91bdba713028cf279423383 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 22 Mar 2021 16:53:17 +0100 Subject: USB: cdc-acm: always claim data interface Make sure to always claim the data interface and bail out if binding fails. Note that the driver had a check to verify that the data interface was not already bound to a driver but would not detect other failures (e.g. if the interface was not authorised). Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210322155318.9837-8-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 1f0fcabef5d2..5ce525d22425 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1309,13 +1309,6 @@ skip_normal_probe: if (!combined_interfaces && intf != control_interface) return -ENODEV; - if (!combined_interfaces && usb_interface_claimed(data_interface)) { - /* valid in this context */ - dev_dbg(&intf->dev, "The data interface isn't available\n"); - return -EBUSY; - } - - if (data_interface->cur_altsetting->desc.bNumEndpoints < 2 || control_interface->cur_altsetting->desc.bNumEndpoints == 0) return -EINVAL; @@ -1499,7 +1492,11 @@ skip_countries: acm->line.bDataBits = 8; acm_set_line(acm, &acm->line); - usb_driver_claim_interface(&acm_driver, data_interface, acm); + if (!acm->combined_interfaces) { + rv = usb_driver_claim_interface(&acm_driver, data_interface, acm); + if (rv) + goto err_remove_files; + } tty_dev = tty_port_register_device(&acm->port, acm_tty_driver, minor, &control_interface->dev); @@ -1521,6 +1518,7 @@ err_release_data_interface: usb_set_intfdata(data_interface, NULL); usb_driver_release_interface(&acm_driver, data_interface); } +err_remove_files: if (acm->country_codes) { device_remove_file(&acm->control->dev, &dev_attr_wCountryCodes); -- cgit v1.2.3 From 79579411826647fd573dbe301c4d933bc90e4be7 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 22 Mar 2021 16:53:18 +0100 Subject: USB: cdc-acm: do not log successful probe on later errors Do not log the successful-probe message until the tty device has been registered. Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210322155318.9837-9-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 5ce525d22425..3fda1ec961d7 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1486,8 +1486,6 @@ skip_countries: acm->nb_index = 0; acm->nb_size = 0; - dev_info(&intf->dev, "ttyACM%d: USB ACM device\n", minor); - acm->line.dwDTERate = cpu_to_le32(9600); acm->line.bDataBits = 8; acm_set_line(acm, &acm->line); @@ -1510,6 +1508,8 @@ skip_countries: usb_clear_halt(usb_dev, acm->out); } + dev_info(&intf->dev, "ttyACM%d: USB ACM device\n", minor); + return 0; err_release_data_interface: -- cgit v1.2.3 From 0bd860493f81eb2a46173f6f5e44cc38331c8dbd Mon Sep 17 00:00:00 2001 From: Vincent Palatin Date: Fri, 19 Mar 2021 13:48:02 +0100 Subject: USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem This LTE modem (M.2 card) has a bug in its power management: there is some kind of race condition for U3 wake-up between the host and the device. The modem firmware sometimes crashes/locks when both events happen at the same time and the modem fully drops off the USB bus (and sometimes re-enumerates, sometimes just gets stuck until the next reboot). Tested with the modem wired to the XHCI controller on an AMD 3015Ce platform. Without the patch, the modem dropped of the USB bus 5 times in 3 days. With the quirk, it stayed connected for a week while the 'runtime_suspended_time' counter incremented as excepted. Signed-off-by: Vincent Palatin Link: https://lore.kernel.org/r/20210319124802.2315195-1-vpalatin@chromium.org Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 6ade3daf7858..76ac5d6555ae 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -498,6 +498,10 @@ static const struct usb_device_id usb_quirk_list[] = { /* DJI CineSSD */ { USB_DEVICE(0x2ca3, 0x0031), .driver_info = USB_QUIRK_NO_LPM }, + /* Fibocom L850-GL LTE Modem */ + { USB_DEVICE(0x2cb7, 0x0007), .driver_info = + USB_QUIRK_IGNORE_REMOTE_WAKEUP }, + /* INTEL VALUE SSD */ { USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME }, -- cgit v1.2.3 From 72ad25fbbb78930f892b191637359ab5b94b3190 Mon Sep 17 00:00:00 2001 From: Atul Gopinathan Date: Tue, 23 Mar 2021 17:04:12 +0530 Subject: staging: rtl8192e: Fix incorrect source in memcpy() The variable "info_element" is of the following type: struct rtllib_info_element *info_element defined in drivers/staging/rtl8192e/rtllib.h: struct rtllib_info_element { u8 id; u8 len; u8 data[]; } __packed; The "len" field defines the size of the "data[]" array. The code is supposed to check if "info_element->len" is greater than 4 and later equal to 6. If this is satisfied then, the last two bytes (the 4th and 5th element of u8 "data[]" array) are copied into "network->CcxRmState". Right now the code uses "memcpy()" with the source as "&info_element[4]" which would copy in wrong and unintended information. The struct "rtllib_info_element" has a size of 2 bytes for "id" and "len", therefore indexing will be done in interval of 2 bytes. So, "info_element[4]" would point to data which is beyond the memory allocated for this pointer (that is, at x+8, while "info_element" has been allocated only from x to x+7 (2 + 6 => 8 bytes)). This patch rectifies this error by using "&info_element->data[4]" which correctly copies the last two bytes of "data[]". NOTE: The faulty line of code came from the following commit: commit ecdfa44610fa ("Staging: add Realtek 8192 PCI wireless driver") The above commit created the file `rtl8192e/ieee80211/ieee80211_rx.c` which had the faulty line of code. This file has been deleted (or possibly renamed) with the contents copied in to a new file `rtl8192e/rtllib_rx.c` along with additional code in the commit 94a799425eee (tagged in Fixes). Fixes: 94a799425eee ("From: wlanfae [PATCH 1/8] rtl8192e: Import new version of driver from realtek") Cc: stable@vger.kernel.org Signed-off-by: Atul Gopinathan Link: https://lore.kernel.org/r/20210323113413.29179-1-atulgopinathan@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8192e/rtllib_rx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/rtl8192e/rtllib_rx.c b/drivers/staging/rtl8192e/rtllib_rx.c index 66c135321da4..15bbb63ca130 100644 --- a/drivers/staging/rtl8192e/rtllib_rx.c +++ b/drivers/staging/rtl8192e/rtllib_rx.c @@ -1967,7 +1967,7 @@ static void rtllib_parse_mife_generic(struct rtllib_device *ieee, info_element->data[2] == 0x96 && info_element->data[3] == 0x01) { if (info_element->len == 6) { - memcpy(network->CcxRmState, &info_element[4], 2); + memcpy(network->CcxRmState, &info_element->data[4], 2); if (network->CcxRmState[0] != 0) network->bCcxRmEnable = true; else -- cgit v1.2.3 From e78836ae76d20f38eed8c8c67f21db97529949da Mon Sep 17 00:00:00 2001 From: Atul Gopinathan Date: Tue, 23 Mar 2021 17:04:14 +0530 Subject: staging: rtl8192e: Change state information from u16 to u8 The "u16 CcxRmState[2];" array field in struct "rtllib_network" has 4 bytes in total while the operations performed on this array through-out the code base are only 2 bytes. The "CcxRmState" field is fed only 2 bytes of data using memcpy(): (In rtllib_rx.c:1972) memcpy(network->CcxRmState, &info_element->data[4], 2) With "info_element->data[]" being a u8 array, if 2 bytes are written into "CcxRmState" (whose one element is u16 size), then the 2 u8 elements from "data[]" gets squashed and written into the first element ("CcxRmState[0]") while the second element ("CcxRmState[1]") is never fed with any data. Same in file rtllib_rx.c:2522: memcpy(dst->CcxRmState, src->CcxRmState, 2); The above line duplicates "src" data to "dst" but only writes 2 bytes (and not 4, which is the actual size). Again, only 1st element gets the value while the 2nd element remains uninitialized. This later makes operations done with CcxRmState unpredictable in the following lines as the 1st element is having a squashed number while the 2nd element is having an uninitialized random number. rtllib_rx.c:1973: if (network->CcxRmState[0] != 0) rtllib_rx.c:1977: network->MBssidMask = network->CcxRmState[1] & 0x07; network->MBssidMask is also of type u8 and not u16. Fix this by changing the type of "CcxRmState" from u16 to u8 so that the data written into this array and read from it make sense and are not random values. NOTE: The wrong initialization of "CcxRmState" can be seen in the following commit: commit ecdfa44610fa ("Staging: add Realtek 8192 PCI wireless driver") The above commit created a file `rtl8192e/ieee80211.h` which used to have the faulty line. The file has been deleted (or possibly renamed) with the contents copied in to a new file `rtl8192e/rtllib.h` along with additional code in the commit 94a799425eee (tagged in Fixes). Fixes: 94a799425eee ("From: wlanfae [PATCH 1/8] rtl8192e: Import new version of driver from realtek") Cc: stable@vger.kernel.org Signed-off-by: Atul Gopinathan Link: https://lore.kernel.org/r/20210323113413.29179-2-atulgopinathan@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8192e/rtllib.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/rtl8192e/rtllib.h b/drivers/staging/rtl8192e/rtllib.h index b84f00b8d18b..4cabaf21c1ca 100644 --- a/drivers/staging/rtl8192e/rtllib.h +++ b/drivers/staging/rtl8192e/rtllib.h @@ -1105,7 +1105,7 @@ struct rtllib_network { bool bWithAironetIE; bool bCkipSupported; bool bCcxRmEnable; - u16 CcxRmState[2]; + u8 CcxRmState[2]; bool bMBssidValid; u8 MBssidMask; u8 MBssid[ETH_ALEN]; -- cgit v1.2.3 From 9d03730ecbc5afabfda26d4dbb014310bc4ea4d9 Mon Sep 17 00:00:00 2001 From: Kenneth Feng Date: Thu, 11 Mar 2021 12:19:57 +0800 Subject: drm/amd/pm: workaround for audio noise issue On some Intel platforms, audio noise can be detected due to high pcie speed switch latency. This patch leaverages ppfeaturemask to fix to the highest pcie speed then disable pcie switching. v2: coding style fix Signed-off-by: Kenneth Feng Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- .../gpu/drm/amd/pm/powerplay/hwmgr/smu7_hwmgr.c | 54 ++++++++++++++++ .../gpu/drm/amd/pm/powerplay/hwmgr/vega10_hwmgr.c | 74 ++++++++++++++++++---- .../gpu/drm/amd/pm/powerplay/hwmgr/vega12_hwmgr.c | 24 +++++++ .../gpu/drm/amd/pm/powerplay/hwmgr/vega20_hwmgr.c | 25 ++++++++ 4 files changed, 166 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_hwmgr.c index a2681fe875ed..22b6a8e8bd21 100644 --- a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_hwmgr.c +++ b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_hwmgr.c @@ -587,6 +587,48 @@ static int smu7_force_switch_to_arbf0(struct pp_hwmgr *hwmgr) tmp, MC_CG_ARB_FREQ_F0); } +static uint16_t smu7_override_pcie_speed(struct pp_hwmgr *hwmgr) +{ + struct amdgpu_device *adev = (struct amdgpu_device *)(hwmgr->adev); + uint16_t pcie_gen = 0; + + if (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_GEN4 && + adev->pm.pcie_gen_mask & CAIL_ASIC_PCIE_LINK_SPEED_SUPPORT_GEN4) + pcie_gen = 3; + else if (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_GEN3 && + adev->pm.pcie_gen_mask & CAIL_ASIC_PCIE_LINK_SPEED_SUPPORT_GEN3) + pcie_gen = 2; + else if (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_GEN2 && + adev->pm.pcie_gen_mask & CAIL_ASIC_PCIE_LINK_SPEED_SUPPORT_GEN2) + pcie_gen = 1; + else if (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_GEN1 && + adev->pm.pcie_gen_mask & CAIL_ASIC_PCIE_LINK_SPEED_SUPPORT_GEN1) + pcie_gen = 0; + + return pcie_gen; +} + +static uint16_t smu7_override_pcie_width(struct pp_hwmgr *hwmgr) +{ + struct amdgpu_device *adev = (struct amdgpu_device *)(hwmgr->adev); + uint16_t pcie_width = 0; + + if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X16) + pcie_width = 16; + else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X12) + pcie_width = 12; + else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X8) + pcie_width = 8; + else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X4) + pcie_width = 4; + else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X2) + pcie_width = 2; + else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X1) + pcie_width = 1; + + return pcie_width; +} + static int smu7_setup_default_pcie_table(struct pp_hwmgr *hwmgr) { struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend); @@ -683,6 +725,11 @@ static int smu7_setup_default_pcie_table(struct pp_hwmgr *hwmgr) PP_Min_PCIEGen), get_pcie_lane_support(data->pcie_lane_cap, PP_Max_PCIELane)); + + if (data->pcie_dpm_key_disabled) + phm_setup_pcie_table_entry(&data->dpm_table.pcie_speed_table, + data->dpm_table.pcie_speed_table.count, + smu7_override_pcie_speed(hwmgr), smu7_override_pcie_width(hwmgr)); } return 0; } @@ -1248,6 +1295,13 @@ static int smu7_start_dpm(struct pp_hwmgr *hwmgr) NULL)), "Failed to enable pcie DPM during DPM Start Function!", return -EINVAL); + } else { + PP_ASSERT_WITH_CODE( + (0 == smum_send_msg_to_smc(hwmgr, + PPSMC_MSG_PCIeDPM_Disable, + NULL)), + "Failed to disble pcie DPM during DPM Start Function!", + return -EINVAL); } if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps, diff --git a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega10_hwmgr.c b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega10_hwmgr.c index 22b636e2b89b..599ec9726601 100644 --- a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega10_hwmgr.c +++ b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega10_hwmgr.c @@ -54,6 +54,9 @@ #include "smuio/smuio_9_0_offset.h" #include "smuio/smuio_9_0_sh_mask.h" +#define smnPCIE_LC_SPEED_CNTL 0x11140290 +#define smnPCIE_LC_LINK_WIDTH_CNTL 0x11140288 + #define HBM_MEMORY_CHANNEL_WIDTH 128 static const uint32_t channel_number[] = {1, 2, 0, 4, 0, 8, 0, 16, 2}; @@ -443,8 +446,7 @@ static void vega10_init_dpm_defaults(struct pp_hwmgr *hwmgr) if (PP_CAP(PHM_PlatformCaps_VCEDPM)) data->smu_features[GNLD_DPM_VCE].supported = true; - if (!data->registry_data.pcie_dpm_key_disabled) - data->smu_features[GNLD_DPM_LINK].supported = true; + data->smu_features[GNLD_DPM_LINK].supported = true; if (!data->registry_data.dcefclk_dpm_key_disabled) data->smu_features[GNLD_DPM_DCEFCLK].supported = true; @@ -1544,6 +1546,13 @@ static int vega10_override_pcie_parameters(struct pp_hwmgr *hwmgr) pp_table->PcieLaneCount[i] = pcie_width; } + if (data->registry_data.pcie_dpm_key_disabled) { + for (i = 0; i < NUM_LINK_LEVELS; i++) { + pp_table->PcieGenSpeed[i] = pcie_gen; + pp_table->PcieLaneCount[i] = pcie_width; + } + } + return 0; } @@ -2966,6 +2975,14 @@ static int vega10_start_dpm(struct pp_hwmgr *hwmgr, uint32_t bitmap) } } + if (data->registry_data.pcie_dpm_key_disabled) { + PP_ASSERT_WITH_CODE(!vega10_enable_smc_features(hwmgr, + false, data->smu_features[GNLD_DPM_LINK].smu_feature_bitmap), + "Attempt to Disable Link DPM feature Failed!", return -EINVAL); + data->smu_features[GNLD_DPM_LINK].enabled = false; + data->smu_features[GNLD_DPM_LINK].supported = false; + } + return 0; } @@ -4584,6 +4601,24 @@ static int vega10_set_ppfeature_status(struct pp_hwmgr *hwmgr, uint64_t new_ppfe return 0; } +static int vega10_get_current_pcie_link_width_level(struct pp_hwmgr *hwmgr) +{ + struct amdgpu_device *adev = hwmgr->adev; + + return (RREG32_PCIE(smnPCIE_LC_LINK_WIDTH_CNTL) & + PCIE_LC_LINK_WIDTH_CNTL__LC_LINK_WIDTH_RD_MASK) + >> PCIE_LC_LINK_WIDTH_CNTL__LC_LINK_WIDTH_RD__SHIFT; +} + +static int vega10_get_current_pcie_link_speed_level(struct pp_hwmgr *hwmgr) +{ + struct amdgpu_device *adev = hwmgr->adev; + + return (RREG32_PCIE(smnPCIE_LC_SPEED_CNTL) & + PSWUSP0_PCIE_LC_SPEED_CNTL__LC_CURRENT_DATA_RATE_MASK) + >> PSWUSP0_PCIE_LC_SPEED_CNTL__LC_CURRENT_DATA_RATE__SHIFT; +} + static int vega10_print_clock_levels(struct pp_hwmgr *hwmgr, enum pp_clock_type type, char *buf) { @@ -4592,8 +4627,9 @@ static int vega10_print_clock_levels(struct pp_hwmgr *hwmgr, struct vega10_single_dpm_table *mclk_table = &(data->dpm_table.mem_table); struct vega10_single_dpm_table *soc_table = &(data->dpm_table.soc_table); struct vega10_single_dpm_table *dcef_table = &(data->dpm_table.dcef_table); - struct vega10_pcie_table *pcie_table = &(data->dpm_table.pcie_table); struct vega10_odn_clock_voltage_dependency_table *podn_vdd_dep = NULL; + uint32_t gen_speed, lane_width, current_gen_speed, current_lane_width; + PPTable_t *pptable = &(data->smc_state_table.pp_table); int i, now, size = 0, count = 0; @@ -4650,15 +4686,31 @@ static int vega10_print_clock_levels(struct pp_hwmgr *hwmgr, "*" : ""); break; case PP_PCIE: - smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetCurrentLinkIndex, &now); - - for (i = 0; i < pcie_table->count; i++) - size += sprintf(buf + size, "%d: %s %s\n", i, - (pcie_table->pcie_gen[i] == 0) ? "2.5GT/s, x1" : - (pcie_table->pcie_gen[i] == 1) ? "5.0GT/s, x16" : - (pcie_table->pcie_gen[i] == 2) ? "8.0GT/s, x16" : "", - (i == now) ? "*" : ""); + current_gen_speed = + vega10_get_current_pcie_link_speed_level(hwmgr); + current_lane_width = + vega10_get_current_pcie_link_width_level(hwmgr); + for (i = 0; i < NUM_LINK_LEVELS; i++) { + gen_speed = pptable->PcieGenSpeed[i]; + lane_width = pptable->PcieLaneCount[i]; + + size += sprintf(buf + size, "%d: %s %s %s\n", i, + (gen_speed == 0) ? "2.5GT/s," : + (gen_speed == 1) ? "5.0GT/s," : + (gen_speed == 2) ? "8.0GT/s," : + (gen_speed == 3) ? "16.0GT/s," : "", + (lane_width == 1) ? "x1" : + (lane_width == 2) ? "x2" : + (lane_width == 3) ? "x4" : + (lane_width == 4) ? "x8" : + (lane_width == 5) ? "x12" : + (lane_width == 6) ? "x16" : "", + (current_gen_speed == gen_speed) && + (current_lane_width == lane_width) ? + "*" : ""); + } break; + case OD_SCLK: if (hwmgr->od_enabled) { size = sprintf(buf, "%s:\n", "OD_SCLK"); diff --git a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega12_hwmgr.c b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega12_hwmgr.c index 43e01d880f7c..4f6da11e8f10 100644 --- a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega12_hwmgr.c +++ b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega12_hwmgr.c @@ -133,6 +133,7 @@ static void vega12_set_default_registry_data(struct pp_hwmgr *hwmgr) data->registry_data.auto_wattman_debug = 0; data->registry_data.auto_wattman_sample_period = 100; data->registry_data.auto_wattman_threshold = 50; + data->registry_data.pcie_dpm_key_disabled = !(hwmgr->feature_mask & PP_PCIE_DPM_MASK); } static int vega12_set_features_platform_caps(struct pp_hwmgr *hwmgr) @@ -539,6 +540,29 @@ static int vega12_override_pcie_parameters(struct pp_hwmgr *hwmgr) pp_table->PcieLaneCount[i] = pcie_width_arg; } + /* override to the highest if it's disabled from ppfeaturmask */ + if (data->registry_data.pcie_dpm_key_disabled) { + for (i = 0; i < NUM_LINK_LEVELS; i++) { + smu_pcie_arg = (i << 16) | (pcie_gen << 8) | pcie_width; + ret = smum_send_msg_to_smc_with_parameter(hwmgr, + PPSMC_MSG_OverridePcieParameters, smu_pcie_arg, + NULL); + PP_ASSERT_WITH_CODE(!ret, + "[OverridePcieParameters] Attempt to override pcie params failed!", + return ret); + + pp_table->PcieGenSpeed[i] = pcie_gen; + pp_table->PcieLaneCount[i] = pcie_width; + } + ret = vega12_enable_smc_features(hwmgr, + false, + data->smu_features[GNLD_DPM_LINK].smu_feature_bitmap); + PP_ASSERT_WITH_CODE(!ret, + "Attempt to Disable DPM LINK Failed!", + return ret); + data->smu_features[GNLD_DPM_LINK].enabled = false; + data->smu_features[GNLD_DPM_LINK].supported = false; + } return 0; } diff --git a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega20_hwmgr.c b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega20_hwmgr.c index f19964c69a00..b6ee3a285c9d 100644 --- a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega20_hwmgr.c +++ b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega20_hwmgr.c @@ -171,6 +171,7 @@ static void vega20_set_default_registry_data(struct pp_hwmgr *hwmgr) data->registry_data.gfxoff_controlled_by_driver = 1; data->gfxoff_allowed = false; data->counter_gfxoff = 0; + data->registry_data.pcie_dpm_key_disabled = !(hwmgr->feature_mask & PP_PCIE_DPM_MASK); } static int vega20_set_features_platform_caps(struct pp_hwmgr *hwmgr) @@ -884,6 +885,30 @@ static int vega20_override_pcie_parameters(struct pp_hwmgr *hwmgr) pp_table->PcieLaneCount[i] = pcie_width_arg; } + /* override to the highest if it's disabled from ppfeaturmask */ + if (data->registry_data.pcie_dpm_key_disabled) { + for (i = 0; i < NUM_LINK_LEVELS; i++) { + smu_pcie_arg = (i << 16) | (pcie_gen << 8) | pcie_width; + ret = smum_send_msg_to_smc_with_parameter(hwmgr, + PPSMC_MSG_OverridePcieParameters, smu_pcie_arg, + NULL); + PP_ASSERT_WITH_CODE(!ret, + "[OverridePcieParameters] Attempt to override pcie params failed!", + return ret); + + pp_table->PcieGenSpeed[i] = pcie_gen; + pp_table->PcieLaneCount[i] = pcie_width; + } + ret = vega20_enable_smc_features(hwmgr, + false, + data->smu_features[GNLD_DPM_LINK].smu_feature_bitmap); + PP_ASSERT_WITH_CODE(!ret, + "Attempt to Disable DPM LINK Failed!", + return ret); + data->smu_features[GNLD_DPM_LINK].enabled = false; + data->smu_features[GNLD_DPM_LINK].supported = false; + } + return 0; } -- cgit v1.2.3 From f0acf637d60ffcef3ccb6e279f743e587b3c7359 Mon Sep 17 00:00:00 2001 From: Ahmad Fatoum Date: Fri, 19 Mar 2021 12:04:57 +0100 Subject: driver core: clear deferred probe reason on probe retry When retrying a deferred probe, any old defer reason string should be discarded. Otherwise, if the probe is deferred again at a different spot, but without setting a message, the now incorrect probe reason will remain. This was observed with the i.MX I2C driver, which ultimately failed to probe due to lack of the GPIO driver. The probe defer for GPIO doesn't record a message, but a previous probe defer to clock_get did. This had the effect that /sys/kernel/debug/devices_deferred listed a misleading probe deferral reason. Cc: stable Fixes: d090b70ede02 ("driver core: add deferring probe reason to devices_deferred property") Reviewed-by: Andy Shevchenko Reviewed-by: Andrzej Hajda Signed-off-by: Ahmad Fatoum Link: https://lore.kernel.org/r/20210319110459.19966-1-a.fatoum@pengutronix.de Signed-off-by: Greg Kroah-Hartman --- drivers/base/dd.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/base/dd.c b/drivers/base/dd.c index 9179825ff646..e2cf3b29123e 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -97,6 +97,9 @@ static void deferred_probe_work_func(struct work_struct *work) get_device(dev); + kfree(dev->p->deferred_probe_reason); + dev->p->deferred_probe_reason = NULL; + /* * Drop the mutex while probing each device; the probe path may * manipulate the deferred list -- cgit v1.2.3 From ce068bc7da473e39b64d130101e178406023df0c Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Thu, 18 Mar 2021 07:59:59 +0200 Subject: mei: allow map and unmap of client dma buffer only for disconnected client Allow map and unmap of the client dma buffer only when the client is not connected. The functions return -EPROTO if the client is already connected. This is to fix the race when traffic may start or stop when buffer is not available. Cc: #v5.11+ Signed-off-by: Tomas Winkler Link: https://lore.kernel.org/r/20210318055959.305627-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/client.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/mei/client.c b/drivers/misc/mei/client.c index 4378a9b25848..2cc370adb238 100644 --- a/drivers/misc/mei/client.c +++ b/drivers/misc/mei/client.c @@ -2286,8 +2286,8 @@ int mei_cl_dma_alloc_and_map(struct mei_cl *cl, const struct file *fp, if (buffer_id == 0) return -EINVAL; - if (!mei_cl_is_connected(cl)) - return -ENODEV; + if (mei_cl_is_connected(cl)) + return -EPROTO; if (cl->dma_mapped) return -EPROTO; @@ -2327,9 +2327,7 @@ int mei_cl_dma_alloc_and_map(struct mei_cl *cl, const struct file *fp, mutex_unlock(&dev->device_lock); wait_event_timeout(cl->wait, - cl->dma_mapped || - cl->status || - !mei_cl_is_connected(cl), + cl->dma_mapped || cl->status, mei_secs_to_jiffies(MEI_CL_CONNECT_TIMEOUT)); mutex_lock(&dev->device_lock); @@ -2376,8 +2374,9 @@ int mei_cl_dma_unmap(struct mei_cl *cl, const struct file *fp) return -EOPNOTSUPP; } - if (!mei_cl_is_connected(cl)) - return -ENODEV; + /* do not allow unmap for connected client */ + if (mei_cl_is_connected(cl)) + return -EPROTO; if (!cl->dma_mapped) return -EPROTO; @@ -2405,9 +2404,7 @@ int mei_cl_dma_unmap(struct mei_cl *cl, const struct file *fp) mutex_unlock(&dev->device_lock); wait_event_timeout(cl->wait, - !cl->dma_mapped || - cl->status || - !mei_cl_is_connected(cl), + !cl->dma_mapped || cl->status, mei_secs_to_jiffies(MEI_CL_CONNECT_TIMEOUT)); mutex_lock(&dev->device_lock); -- cgit v1.2.3 From 01faae5193d6190b7b3aa93dae43f514e866d652 Mon Sep 17 00:00:00 2001 From: Du Cheng Date: Fri, 12 Mar 2021 16:14:21 +0800 Subject: drivers: video: fbcon: fix NULL dereference in fbcon_cursor() add null-check on function pointer before dereference on ops->cursor Reported-by: syzbot+b67aaae8d3a927f68d20@syzkaller.appspotmail.com Cc: stable Signed-off-by: Du Cheng Link: https://lore.kernel.org/r/20210312081421.452405-1-ducheng2@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/video/fbdev/core/fbcon.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c index 44a5cd2f54cc..3406067985b1 100644 --- a/drivers/video/fbdev/core/fbcon.c +++ b/drivers/video/fbdev/core/fbcon.c @@ -1333,6 +1333,9 @@ static void fbcon_cursor(struct vc_data *vc, int mode) ops->cursor_flash = (mode == CM_ERASE) ? 0 : 1; + if (!ops->cursor) + return; + ops->cursor(vc, info, mode, get_color(vc, info, c, 1), get_color(vc, info, c, 0)); } -- cgit v1.2.3 From daa58c8eec0a65ac8e2e77ff3ea8a233d8eec954 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 23 Mar 2021 09:56:34 -0700 Subject: Input: i8042 - fix Pegatron C15B ID entry The Zenbook Flip entry that was added overwrites a previous one because of a typo: In file included from drivers/input/serio/i8042.h:23, from drivers/input/serio/i8042.c:131: drivers/input/serio/i8042-x86ia64io.h:591:28: error: initialized field overwritten [-Werror=override-init] 591 | .matches = { | ^ drivers/input/serio/i8042-x86ia64io.h:591:28: note: (near initialization for 'i8042_dmi_noselftest_table[0].matches') Add the missing separator between the two. Fixes: b5d6e7ab7fe7 ("Input: i8042 - add ASUS Zenbook Flip to noselftest list") Signed-off-by: Arnd Bergmann Reviewed-by: Hans de Goede Reviewed-by: Marcos Paulo de Souza Link: https://lore.kernel.org/r/20210323130623.2302402-1-arnd@kernel.org Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042-x86ia64io.h | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 9119e12a5778..a5a003553646 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -588,6 +588,7 @@ static const struct dmi_system_id i8042_dmi_noselftest_table[] = { DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), DMI_MATCH(DMI_CHASSIS_TYPE, "10"), /* Notebook */ }, + }, { .matches = { DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), DMI_MATCH(DMI_CHASSIS_TYPE, "31"), /* Convertible Notebook */ -- cgit v1.2.3 From 69d5ff3e9e51e23d5d81bf48480aa5671be67a71 Mon Sep 17 00:00:00 2001 From: Fabian Vogt Date: Tue, 23 Mar 2021 10:45:55 -0700 Subject: Input: nspire-keypad - enable interrupts only when opened The driver registers an interrupt handler in _probe, but didn't configure them until later when the _open function is called. In between, the keypad can fire an IRQ due to touchpad activity, which the handler ignores. This causes the kernel to disable the interrupt, blocking the keypad from working. Fix this by disabling interrupts before registering the handler. Additionally, disable them in _close, so that they're only enabled while open. Fixes: fc4f31461892 ("Input: add TI-Nspire keypad support") Signed-off-by: Fabian Vogt Link: https://lore.kernel.org/r/3383725.iizBOSrK1V@linux-e202.suse.de Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/nspire-keypad.c | 56 +++++++++++++++++++--------------- 1 file changed, 31 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/input/keyboard/nspire-keypad.c b/drivers/input/keyboard/nspire-keypad.c index 63d5e488137d..e9fa1423f136 100644 --- a/drivers/input/keyboard/nspire-keypad.c +++ b/drivers/input/keyboard/nspire-keypad.c @@ -93,9 +93,15 @@ static irqreturn_t nspire_keypad_irq(int irq, void *dev_id) return IRQ_HANDLED; } -static int nspire_keypad_chip_init(struct nspire_keypad *keypad) +static int nspire_keypad_open(struct input_dev *input) { + struct nspire_keypad *keypad = input_get_drvdata(input); unsigned long val = 0, cycles_per_us, delay_cycles, row_delay_cycles; + int error; + + error = clk_prepare_enable(keypad->clk); + if (error) + return error; cycles_per_us = (clk_get_rate(keypad->clk) / 1000000); if (cycles_per_us == 0) @@ -121,30 +127,6 @@ static int nspire_keypad_chip_init(struct nspire_keypad *keypad) keypad->int_mask = 1 << 1; writel(keypad->int_mask, keypad->reg_base + KEYPAD_INTMSK); - /* Disable GPIO interrupts to prevent hanging on touchpad */ - /* Possibly used to detect touchpad events */ - writel(0, keypad->reg_base + KEYPAD_UNKNOWN_INT); - /* Acknowledge existing interrupts */ - writel(~0, keypad->reg_base + KEYPAD_UNKNOWN_INT_STS); - - return 0; -} - -static int nspire_keypad_open(struct input_dev *input) -{ - struct nspire_keypad *keypad = input_get_drvdata(input); - int error; - - error = clk_prepare_enable(keypad->clk); - if (error) - return error; - - error = nspire_keypad_chip_init(keypad); - if (error) { - clk_disable_unprepare(keypad->clk); - return error; - } - return 0; } @@ -152,6 +134,11 @@ static void nspire_keypad_close(struct input_dev *input) { struct nspire_keypad *keypad = input_get_drvdata(input); + /* Disable interrupts */ + writel(0, keypad->reg_base + KEYPAD_INTMSK); + /* Acknowledge existing interrupts */ + writel(~0, keypad->reg_base + KEYPAD_INT); + clk_disable_unprepare(keypad->clk); } @@ -210,6 +197,25 @@ static int nspire_keypad_probe(struct platform_device *pdev) return -ENOMEM; } + error = clk_prepare_enable(keypad->clk); + if (error) { + dev_err(&pdev->dev, "failed to enable clock\n"); + return error; + } + + /* Disable interrupts */ + writel(0, keypad->reg_base + KEYPAD_INTMSK); + /* Acknowledge existing interrupts */ + writel(~0, keypad->reg_base + KEYPAD_INT); + + /* Disable GPIO interrupts to prevent hanging on touchpad */ + /* Possibly used to detect touchpad events */ + writel(0, keypad->reg_base + KEYPAD_UNKNOWN_INT); + /* Acknowledge existing GPIO interrupts */ + writel(~0, keypad->reg_base + KEYPAD_UNKNOWN_INT_STS); + + clk_disable_unprepare(keypad->clk); + input_set_drvdata(input, keypad); input->id.bustype = BUS_HOST; -- cgit v1.2.3 From 7547deff8a221e6bf1e563cf1b636844a8e5378a Mon Sep 17 00:00:00 2001 From: "David E. Box" Date: Tue, 16 Mar 2021 19:44:54 -0700 Subject: platform/x86: intel_pmt_class: Initial resource to 0 Initialize the struct resource in intel_pmt_dev_register to zero to avoid a fault should the char *name field be non-zero. Signed-off-by: David E. Box Link: https://lore.kernel.org/r/20210317024455.3071477-1-david.e.box@linux.intel.com Signed-off-by: Hans de Goede --- drivers/platform/x86/intel_pmt_class.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/platform/x86/intel_pmt_class.c b/drivers/platform/x86/intel_pmt_class.c index c8939fba4509..ee2b3bbeb83d 100644 --- a/drivers/platform/x86/intel_pmt_class.c +++ b/drivers/platform/x86/intel_pmt_class.c @@ -173,7 +173,7 @@ static int intel_pmt_dev_register(struct intel_pmt_entry *entry, struct intel_pmt_namespace *ns, struct device *parent) { - struct resource res; + struct resource res = {0}; struct device *dev; int ret; -- cgit v1.2.3 From 10c931cdfe64ebc38a15a485dd794915044f2111 Mon Sep 17 00:00:00 2001 From: "David E. Box" Date: Tue, 16 Mar 2021 19:44:55 -0700 Subject: platform/x86: intel_pmt_crashlog: Fix incorrect macros Fixes off-by-one bugs in the macro assignments for the crashlog control bits. Was initially tested on emulation but bug revealed after testing on silicon. Fixes: 5ef9998c96b0 ("platform/x86: Intel PMT Crashlog capability driver") Signed-off-by: David E. Box Link: https://lore.kernel.org/r/20210317024455.3071477-2-david.e.box@linux.intel.com Signed-off-by: Hans de Goede --- drivers/platform/x86/intel_pmt_crashlog.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/platform/x86/intel_pmt_crashlog.c b/drivers/platform/x86/intel_pmt_crashlog.c index 97dd749c8290..92d315a16cfd 100644 --- a/drivers/platform/x86/intel_pmt_crashlog.c +++ b/drivers/platform/x86/intel_pmt_crashlog.c @@ -23,18 +23,17 @@ #define CRASH_TYPE_OOBMSM 1 /* Control Flags */ -#define CRASHLOG_FLAG_DISABLE BIT(27) +#define CRASHLOG_FLAG_DISABLE BIT(28) /* - * Bits 28 and 29 control the state of bit 31. + * Bits 29 and 30 control the state of bit 31. * - * Bit 28 will clear bit 31, if set, allowing a new crashlog to be captured. - * Bit 29 will immediately trigger a crashlog to be generated, setting bit 31. - * Bit 30 is read-only and reserved as 0. + * Bit 29 will clear bit 31, if set, allowing a new crashlog to be captured. + * Bit 30 will immediately trigger a crashlog to be generated, setting bit 31. * Bit 31 is the read-only status with a 1 indicating log is complete. */ -#define CRASHLOG_FLAG_TRIGGER_CLEAR BIT(28) -#define CRASHLOG_FLAG_TRIGGER_EXECUTE BIT(29) +#define CRASHLOG_FLAG_TRIGGER_CLEAR BIT(29) +#define CRASHLOG_FLAG_TRIGGER_EXECUTE BIT(30) #define CRASHLOG_FLAG_TRIGGER_COMPLETE BIT(31) #define CRASHLOG_FLAG_TRIGGER_MASK GENMASK(31, 28) -- cgit v1.2.3 From 269b04a50992d8defab869079049ecfc60b6b3e5 Mon Sep 17 00:00:00 2001 From: "David E. Box" Date: Fri, 19 Mar 2021 13:18:43 -0700 Subject: platform/x86: intel_pmc_core: Update Kconfig The intel_pmc_core driver is mostly used as a debugging driver for Intel platforms that support SLPS0 (S0ix). But the driver may also be used to communicate actions to the PMC in order to ensure transition to SLPS0 on some systems and architectures. As such the driver should be built on all platforms it supports. Indicate this in the Kconfig. Also update the list of supported features. Signed-off-by: David E. Box Suggested-by: Mario Limonciello Link: https://lore.kernel.org/r/20210319201844.3305399-1-david.e.box@linux.intel.com Signed-off-by: Hans de Goede --- drivers/platform/x86/Kconfig | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index ad4e630e73e2..461ec61530eb 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -1173,15 +1173,20 @@ config INTEL_PMC_CORE depends on PCI help The Intel Platform Controller Hub for Intel Core SoCs provides access - to Power Management Controller registers via a PCI interface. This + to Power Management Controller registers via various interfaces. This driver can utilize debugging capabilities and supported features as - exposed by the Power Management Controller. + exposed by the Power Management Controller. It also may perform some + tasks in the PMC in order to enable transition into the SLPS0 state. + It should be selected on all Intel platforms supported by the driver. Supported features: - SLP_S0_RESIDENCY counter - PCH IP Power Gating status - - LTR Ignore + - LTR Ignore / LTR Show - MPHY/PLL gating status (Sunrisepoint PCH only) + - SLPS0 Debug registers (Cannonlake/Icelake PCH) + - Low Power Mode registers (Tigerlake and beyond) + - PMC quirks as needed to enable SLPS0/S0ix config INTEL_PMT_CLASS tristate -- cgit v1.2.3 From d1635448f1105e549b4041aab930dbc6945fc635 Mon Sep 17 00:00:00 2001 From: "David E. Box" Date: Fri, 19 Mar 2021 13:18:44 -0700 Subject: platform/x86: intel_pmc_core: Ignore GBE LTR on Tiger Lake platforms Due to a HW limitation, the Latency Tolerance Reporting (LTR) value programmed in the Tiger Lake GBE controller is not large enough to allow the platform to enter Package C10, which in turn prevents the platform from achieving its low power target during suspend-to-idle. Ignore the GBE LTR value on Tiger Lake. LTR ignore functionality is currently performed solely by a debugfs write call. Split out the LTR code into its own function that can be called by both the debugfs writer and by this work around. Signed-off-by: David E. Box Reviewed-by: Sasha Neftin Cc: intel-wired-lan@lists.osuosl.org Reviewed-by: Rajneesh Bhardwaj Link: https://lore.kernel.org/r/20210319201844.3305399-2-david.e.box@linux.intel.com Signed-off-by: Hans de Goede --- drivers/platform/x86/intel_pmc_core.c | 50 ++++++++++++++++++++++++----------- 1 file changed, 35 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/platform/x86/intel_pmc_core.c b/drivers/platform/x86/intel_pmc_core.c index ee2f757515b0..b5888aeb4bcf 100644 --- a/drivers/platform/x86/intel_pmc_core.c +++ b/drivers/platform/x86/intel_pmc_core.c @@ -863,34 +863,45 @@ out_unlock: } DEFINE_SHOW_ATTRIBUTE(pmc_core_pll); -static ssize_t pmc_core_ltr_ignore_write(struct file *file, - const char __user *userbuf, - size_t count, loff_t *ppos) +static int pmc_core_send_ltr_ignore(u32 value) { struct pmc_dev *pmcdev = &pmc; const struct pmc_reg_map *map = pmcdev->map; - u32 val, buf_size, fd; - int err; - - buf_size = count < 64 ? count : 64; - - err = kstrtou32_from_user(userbuf, buf_size, 10, &val); - if (err) - return err; + u32 reg; + int err = 0; mutex_lock(&pmcdev->lock); - if (val > map->ltr_ignore_max) { + if (value > map->ltr_ignore_max) { err = -EINVAL; goto out_unlock; } - fd = pmc_core_reg_read(pmcdev, map->ltr_ignore_offset); - fd |= (1U << val); - pmc_core_reg_write(pmcdev, map->ltr_ignore_offset, fd); + reg = pmc_core_reg_read(pmcdev, map->ltr_ignore_offset); + reg |= BIT(value); + pmc_core_reg_write(pmcdev, map->ltr_ignore_offset, reg); out_unlock: mutex_unlock(&pmcdev->lock); + + return err; +} + +static ssize_t pmc_core_ltr_ignore_write(struct file *file, + const char __user *userbuf, + size_t count, loff_t *ppos) +{ + u32 buf_size, value; + int err; + + buf_size = min_t(u32, count, 64); + + err = kstrtou32_from_user(userbuf, buf_size, 10, &value); + if (err) + return err; + + err = pmc_core_send_ltr_ignore(value); + return err == 0 ? count : err; } @@ -1244,6 +1255,15 @@ static int pmc_core_probe(struct platform_device *pdev) pmcdev->pmc_xram_read_bit = pmc_core_check_read_lock_bit(); dmi_check_system(pmc_core_dmi_table); + /* + * On TGL, due to a hardware limitation, the GBE LTR blocks PC10 when + * a cable is attached. Tell the PMC to ignore it. + */ + if (pmcdev->map == &tgl_reg_map) { + dev_dbg(&pdev->dev, "ignoring GBE LTR\n"); + pmc_core_send_ltr_ignore(3); + } + pmc_core_dbgfs_register(pmcdev); device_initialized = true; -- cgit v1.2.3 From c933b111094f2818571fc51b81b98ee0d370c035 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 18 Mar 2021 16:44:10 -0400 Subject: drm/amdgpu: Add additional Sienna Cichlid PCI ID Add new DID. Reviewed-by: Guchun Chen Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c index 1b145a29803c..e92e7dea71da 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c @@ -1107,6 +1107,7 @@ static const struct pci_device_id pciidlist[] = { {0x1002, 0x73A3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SIENNA_CICHLID}, {0x1002, 0x73AB, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SIENNA_CICHLID}, {0x1002, 0x73AE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SIENNA_CICHLID}, + {0x1002, 0x73AF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SIENNA_CICHLID}, {0x1002, 0x73BF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SIENNA_CICHLID}, /* Van Gogh */ -- cgit v1.2.3 From 5c458585c0141754cdcbf25feebb547dd671b559 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 16 Feb 2021 12:22:40 -0500 Subject: drm/amdgpu/display: restore AUX_DPHY_TX_CONTROL for DCN2.x Commit 098214999c8f added fetching of the AUX_DPHY register values from the vbios, but it also changed the default values in the case when there are no values in the vbios. This causes problems with displays with high refresh rates. To fix this, switch back to the original default value for AUX_DPHY_TX_CONTROL. Fixes: 098214999c8f ("drm/amd/display: Read VBIOS Golden Settings Tbl") Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1426 Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher Cc: Igor Kravchenko Cc: Aric Cyr Cc: Aurabindo Pillai Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/dc/dcn20/dcn20_link_encoder.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_link_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_link_encoder.c index fa013496e26b..2f9bfaeaba8d 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_link_encoder.c +++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_link_encoder.c @@ -341,8 +341,7 @@ void enc2_hw_init(struct link_encoder *enc) } else { AUX_REG_WRITE(AUX_DPHY_RX_CONTROL0, 0x103d1110); - AUX_REG_WRITE(AUX_DPHY_TX_CONTROL, 0x21c4d); - + AUX_REG_WRITE(AUX_DPHY_TX_CONTROL, 0x21c7a); } //AUX_DPHY_TX_REF_CONTROL'AUX_TX_REF_DIV HW default is 0x32; -- cgit v1.2.3 From 8840e3bd981f128846b01c12d3966d115e8617c9 Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Mon, 22 Mar 2021 22:28:17 +0200 Subject: drm/i915: Fix the GT fence revocation runtime PM logic To optimize some task deferring it until runtime resume unless someone holds a runtime PM reference (because in this case the task can be done w/o the overhead of runtime resume), we have to use the runtime PM get-if-active logic: If the runtime PM usage count is 0 (and so get-if-in-use would return false) the runtime suspend handler is not necessarily called yet (it could be just pending), so the device is not necessarily powered down, and so the runtime resume handler is not guaranteed to be called. The fence revocation depends on the above deferral, so add a get-if-active helper and use it during fence revocation. v2: - Add code comment explaining the fence reg programming deferral logic to i915_vma_revoke_fence(). (Chris) - Add Cc: stable and Fixes: tags. (Chris) - Fix the function docbook comment. Cc: Chris Wilson Cc: # v4.12+ Fixes: 181df2d458f3 ("drm/i915: Take rpm wakelock for releasing the fence on unbind") Reviewed-by: Chris Wilson Signed-off-by: Imre Deak Link: https://patchwork.freedesktop.org/patch/msgid/20210322204223.919936-1-imre.deak@intel.com (cherry picked from commit 9d58aa46291d4d696bb1eac3436d3118f7bf2573) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/gt/intel_ggtt_fencing.c | 13 ++++++++++++- drivers/gpu/drm/i915/intel_runtime_pm.c | 29 +++++++++++++++++++++++----- drivers/gpu/drm/i915/intel_runtime_pm.h | 5 +++++ 3 files changed, 41 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/gt/intel_ggtt_fencing.c b/drivers/gpu/drm/i915/gt/intel_ggtt_fencing.c index a357bb431815..67de2b189598 100644 --- a/drivers/gpu/drm/i915/gt/intel_ggtt_fencing.c +++ b/drivers/gpu/drm/i915/gt/intel_ggtt_fencing.c @@ -316,7 +316,18 @@ void i915_vma_revoke_fence(struct i915_vma *vma) WRITE_ONCE(fence->vma, NULL); vma->fence = NULL; - with_intel_runtime_pm_if_in_use(fence_to_uncore(fence)->rpm, wakeref) + /* + * Skip the write to HW if and only if the device is currently + * suspended. + * + * If the driver does not currently hold a wakeref (if_in_use == 0), + * the device may currently be runtime suspended, or it may be woken + * up before the suspend takes place. If the device is not suspended + * (powered down) and we skip clearing the fence register, the HW is + * left in an undefined state where we may end up with multiple + * registers overlapping. + */ + with_intel_runtime_pm_if_active(fence_to_uncore(fence)->rpm, wakeref) fence_write(fence); } diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c index 153ca9e65382..8b725efb2254 100644 --- a/drivers/gpu/drm/i915/intel_runtime_pm.c +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c @@ -412,12 +412,20 @@ intel_wakeref_t intel_runtime_pm_get(struct intel_runtime_pm *rpm) } /** - * intel_runtime_pm_get_if_in_use - grab a runtime pm reference if device in use + * __intel_runtime_pm_get_if_active - grab a runtime pm reference if device is active * @rpm: the intel_runtime_pm structure + * @ignore_usecount: get a ref even if dev->power.usage_count is 0 * * This function grabs a device-level runtime pm reference if the device is - * already in use and ensures that it is powered up. It is illegal to try - * and access the HW should intel_runtime_pm_get_if_in_use() report failure. + * already active and ensures that it is powered up. It is illegal to try + * and access the HW should intel_runtime_pm_get_if_active() report failure. + * + * If @ignore_usecount=true, a reference will be acquired even if there is no + * user requiring the device to be powered up (dev->power.usage_count == 0). + * If the function returns false in this case then it's guaranteed that the + * device's runtime suspend hook has been called already or that it will be + * called (and hence it's also guaranteed that the device's runtime resume + * hook will be called eventually). * * Any runtime pm reference obtained by this function must have a symmetric * call to intel_runtime_pm_put() to release the reference again. @@ -425,7 +433,8 @@ intel_wakeref_t intel_runtime_pm_get(struct intel_runtime_pm *rpm) * Returns: the wakeref cookie to pass to intel_runtime_pm_put(), evaluates * as True if the wakeref was acquired, or False otherwise. */ -intel_wakeref_t intel_runtime_pm_get_if_in_use(struct intel_runtime_pm *rpm) +static intel_wakeref_t __intel_runtime_pm_get_if_active(struct intel_runtime_pm *rpm, + bool ignore_usecount) { if (IS_ENABLED(CONFIG_PM)) { /* @@ -434,7 +443,7 @@ intel_wakeref_t intel_runtime_pm_get_if_in_use(struct intel_runtime_pm *rpm) * function, since the power state is undefined. This applies * atm to the late/early system suspend/resume handlers. */ - if (pm_runtime_get_if_in_use(rpm->kdev) <= 0) + if (pm_runtime_get_if_active(rpm->kdev, ignore_usecount) <= 0) return 0; } @@ -443,6 +452,16 @@ intel_wakeref_t intel_runtime_pm_get_if_in_use(struct intel_runtime_pm *rpm) return track_intel_runtime_pm_wakeref(rpm); } +intel_wakeref_t intel_runtime_pm_get_if_in_use(struct intel_runtime_pm *rpm) +{ + return __intel_runtime_pm_get_if_active(rpm, false); +} + +intel_wakeref_t intel_runtime_pm_get_if_active(struct intel_runtime_pm *rpm) +{ + return __intel_runtime_pm_get_if_active(rpm, true); +} + /** * intel_runtime_pm_get_noresume - grab a runtime pm reference * @rpm: the intel_runtime_pm structure diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.h b/drivers/gpu/drm/i915/intel_runtime_pm.h index ae64ff14c642..1e4ddd11c12b 100644 --- a/drivers/gpu/drm/i915/intel_runtime_pm.h +++ b/drivers/gpu/drm/i915/intel_runtime_pm.h @@ -177,6 +177,7 @@ void intel_runtime_pm_driver_release(struct intel_runtime_pm *rpm); intel_wakeref_t intel_runtime_pm_get(struct intel_runtime_pm *rpm); intel_wakeref_t intel_runtime_pm_get_if_in_use(struct intel_runtime_pm *rpm); +intel_wakeref_t intel_runtime_pm_get_if_active(struct intel_runtime_pm *rpm); intel_wakeref_t intel_runtime_pm_get_noresume(struct intel_runtime_pm *rpm); intel_wakeref_t intel_runtime_pm_get_raw(struct intel_runtime_pm *rpm); @@ -188,6 +189,10 @@ intel_wakeref_t intel_runtime_pm_get_raw(struct intel_runtime_pm *rpm); for ((wf) = intel_runtime_pm_get_if_in_use(rpm); (wf); \ intel_runtime_pm_put((rpm), (wf)), (wf) = 0) +#define with_intel_runtime_pm_if_active(rpm, wf) \ + for ((wf) = intel_runtime_pm_get_if_active(rpm); (wf); \ + intel_runtime_pm_put((rpm), (wf)), (wf) = 0) + void intel_runtime_pm_put_unchecked(struct intel_runtime_pm *rpm); #if IS_ENABLED(CONFIG_DRM_I915_DEBUG_RUNTIME_PM) void intel_runtime_pm_put(struct intel_runtime_pm *rpm, intel_wakeref_t wref); -- cgit v1.2.3 From 25928deeb1e4e2cdae1dccff349320c6841eb5f8 Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Tue, 23 Mar 2021 14:20:33 -0700 Subject: ACPICA: Always create namespace nodes using acpi_ns_create_node() ACPICA commit 29da9a2a3f5b2c60420893e5c6309a0586d7a329 ACPI is allocating an object using kmalloc(), but then frees it using kmem_cache_free(<"Acpi-Namespace" kmem_cache>). This is wrong and can lead to boot failures manifesting like this: hpet0: 3 comparators, 64-bit 100.000000 MHz counter clocksource: Switched to clocksource tsc-early BUG: unable to handle page fault for address: 000000003ffe0018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.6.0+ #211 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 RIP: 0010:kmem_cache_alloc+0x70/0x1d0 Code: 00 00 4c 8b 45 00 65 49 8b 50 08 65 4c 03 05 6f cc e7 7e 4d 8b 20 4d 85 e4 0f 84 3d 01 00 00 8b 45 20 48 8b 7d 00 48 8d 4a 01 <49> 8b 1c 04 4c 89 e0 65 48 0f c7 0f 0f 94 c0 84 c0 74 c5 8b 45 20 RSP: 0000:ffffc90000013df8 EFLAGS: 00010206 RAX: 0000000000000018 RBX: ffffffff81c49200 RCX: 0000000000000002 RDX: 0000000000000001 RSI: 0000000000000dc0 RDI: 000000000002b300 RBP: ffff88803e403d00 R08: ffff88803ec2b300 R09: 0000000000000001 R10: 0000000000000dc0 R11: 0000000000000006 R12: 000000003ffe0000 R13: ffffffff8110a583 R14: 0000000000000dc0 R15: ffffffff81c49a80 FS: 0000000000000000(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000003ffe0018 CR3: 0000000001c0a001 CR4: 00000000003606f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __trace_define_field+0x33/0xa0 event_trace_init+0xeb/0x2b4 tracer_init_tracefs+0x60/0x195 ? register_tracer+0x1e7/0x1e7 do_one_initcall+0x74/0x160 kernel_init_freeable+0x190/0x1f0 ? rest_init+0x9a/0x9a kernel_init+0x5/0xf6 ret_from_fork+0x35/0x40 CR2: 000000003ffe0018 ---[ end trace 707efa023f2ee960 ]--- RIP: 0010:kmem_cache_alloc+0x70/0x1d0 Bisection leads to unrelated changes in slab; Vlastimil Babka suggests an unrelated layout or slab merge change merely exposed the underlying bug. Link: https://lore.kernel.org/lkml/4dc93ff8-f86e-f4c9-ebeb-6d3153a78d03@oracle.com/ Link: https://lore.kernel.org/r/a1461e21-c744-767d-6dfc-6641fd3e3ce2@siemens.com Link: https://github.com/acpica/acpica/commit/29da9a2a Fixes: f79c8e4136ea ("ACPICA: Namespace: simplify creation of the initial/default namespace") Reported-by: Jan Kiszka Diagnosed-by: Vlastimil Babka Diagnosed-by: Kees Cook Signed-off-by: Vegard Nossum Signed-off-by: Bob Moore Signed-off-by: Erik Kaneda Cc: 5.10+ # 5.10+ Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpica/nsaccess.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/acpica/nsaccess.c b/drivers/acpi/acpica/nsaccess.c index 3f045b5953b2..a0c1a665dfc1 100644 --- a/drivers/acpi/acpica/nsaccess.c +++ b/drivers/acpi/acpica/nsaccess.c @@ -99,13 +99,12 @@ acpi_status acpi_ns_root_initialize(void) * just create and link the new node(s) here. */ new_node = - ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_namespace_node)); + acpi_ns_create_node(*ACPI_CAST_PTR(u32, init_val->name)); if (!new_node) { status = AE_NO_MEMORY; goto unlock_and_exit; } - ACPI_COPY_NAMESEG(new_node->name.ascii, init_val->name); new_node->descriptor_type = ACPI_DESC_TYPE_NAMED; new_node->type = init_val->type; -- cgit v1.2.3 From f51d7bf1dbe5522c51c93fe8faa5f4abbdf339cd Mon Sep 17 00:00:00 2001 From: Yangbo Lu Date: Tue, 23 Mar 2021 16:02:29 +0800 Subject: ptp_qoriq: fix overflow in ptp_qoriq_adjfine() u64 calcalation Current calculation for diff of TMR_ADD register value may have 64-bit overflow in this code line, when long type scaled_ppm is large. adj *= scaled_ppm; This patch is to resolve it by using mul_u64_u64_div_u64(). Signed-off-by: Yangbo Lu Signed-off-by: David S. Miller --- drivers/ptp/ptp_qoriq.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/ptp/ptp_qoriq.c b/drivers/ptp/ptp_qoriq.c index beb5f74944cd..08f4cf0ad9e3 100644 --- a/drivers/ptp/ptp_qoriq.c +++ b/drivers/ptp/ptp_qoriq.c @@ -189,15 +189,16 @@ int ptp_qoriq_adjfine(struct ptp_clock_info *ptp, long scaled_ppm) tmr_add = ptp_qoriq->tmr_add; adj = tmr_add; - /* calculate diff as adj*(scaled_ppm/65536)/1000000 - * and round() to the nearest integer + /* + * Calculate diff and round() to the nearest integer + * + * diff = adj * (ppb / 1000000000) + * = adj * scaled_ppm / 65536000000 */ - adj *= scaled_ppm; - diff = div_u64(adj, 8000000); - diff = (diff >> 13) + ((diff >> 12) & 1); + diff = mul_u64_u64_div_u64(adj, scaled_ppm, 32768000000); + diff = DIV64_U64_ROUND_UP(diff, 2); tmr_add = neg_adj ? tmr_add - diff : tmr_add + diff; - ptp_qoriq->write(®s->ctrl_regs->tmr_add, tmr_add); return 0; -- cgit v1.2.3 From 9e0a537d06fc36861e4f78d0a7df1fe2b3592714 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Tue, 23 Mar 2021 12:32:45 +0000 Subject: octeontx2-af: Fix memory leak of object buf Currently the error return path when lfs fails to allocate is not free'ing the memory allocated to buf. Fix this by adding the missing kfree. Addresses-Coverity: ("Resource leak") Fixes: f7884097141b ("octeontx2-af: Formatting debugfs entry rsrc_alloc.") Signed-off-by: Colin Ian King Acked-by: Sunil Goutham Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c index b4c53b19f535..de3968d2e5ce 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c @@ -253,8 +253,10 @@ static ssize_t rvu_dbg_rsrc_attach_status(struct file *filp, return -ENOSPC; lfs = kzalloc(lf_str_size, GFP_KERNEL); - if (!lfs) + if (!lfs) { + kfree(buf); return -ENOMEM; + } off += scnprintf(&buf[off], buf_size - 1 - off, "%-*s", lf_str_size, "pcifunc"); for (index = 0; index < BLK_COUNT; index++) -- cgit v1.2.3 From 6f235a69e59484e382dc31952025b0308efedc17 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 23 Mar 2021 22:52:50 +0100 Subject: ch_ktls: fix enum-conversion warning gcc points out an incorrect enum assignment: drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c: In function 'chcr_ktls_cpl_set_tcb_rpl': drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c:684:22: warning: implicit conversion from 'enum ' to 'enum ch_ktls_open_state' [-Wenum-conversion] This appears harmless, and should apparently use 'CH_KTLS_OPEN_SUCCESS' instead of 'false', with the same value '0'. Fixes: efca3878a5fb ("ch_ktls: Issue if connection offload fails") Reviewed-by: Andrew Lunn Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c b/drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c index 169e10c91378..1115b8f9ea4e 100644 --- a/drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c +++ b/drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c @@ -722,7 +722,7 @@ static int chcr_ktls_cpl_set_tcb_rpl(struct adapter *adap, unsigned char *input) kvfree(tx_info); return 0; } - tx_info->open_state = false; + tx_info->open_state = CH_KTLS_OPEN_SUCCESS; spin_unlock(&tx_info->lock); complete(&tx_info->completion); -- cgit v1.2.3 From 2b514ec72706a31bea0c3b97e622b81535b5323a Mon Sep 17 00:00:00 2001 From: Roger Pau Monne Date: Wed, 24 Mar 2021 13:24:23 +0100 Subject: xen/x86: make XEN_BALLOON_MEMORY_HOTPLUG_LIMIT depend on MEMORY_HOTPLUG MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Xen memory hotplug limit should depend on the memory hotplug generic option, rather than the Xen balloon configuration. It's possible to have a kernel with generic memory hotplug enabled, but without Xen balloon enabled, at which point memory hotplug won't work correctly due to the size limitation of the p2m. Rename the option to XEN_MEMORY_HOTPLUG_LIMIT since it's no longer tied to ballooning. Fixes: 9e2369c06c8a18 ("xen: add helpers to allocate unpopulated memory") Signed-off-by: Roger Pau Monné Reviewed-by: Boris Ostrovsky Link: https://lore.kernel.org/r/20210324122424.58685-2-roger.pau@citrix.com Signed-off-by: Boris Ostrovsky --- drivers/xen/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig index 41645fe6ad48..ea0efd290c37 100644 --- a/drivers/xen/Kconfig +++ b/drivers/xen/Kconfig @@ -50,11 +50,11 @@ config XEN_BALLOON_MEMORY_HOTPLUG SUBSYSTEM=="memory", ACTION=="add", RUN+="/bin/sh -c '[ -f /sys$devpath/state ] && echo online > /sys$devpath/state'" -config XEN_BALLOON_MEMORY_HOTPLUG_LIMIT +config XEN_MEMORY_HOTPLUG_LIMIT int "Hotplugged memory limit (in GiB) for a PV guest" default 512 depends on XEN_HAVE_PVMMU - depends on XEN_BALLOON_MEMORY_HOTPLUG + depends on MEMORY_HOTPLUG help Maxmium amount of memory (in GiB) that a PV guest can be expanded to when using memory hotplug. -- cgit v1.2.3 From d3999c1f7bbbc100c167d7ad3cd79c1d10446ba2 Mon Sep 17 00:00:00 2001 From: Lyude Paul Date: Thu, 4 Mar 2021 20:52:41 -0500 Subject: drm/nouveau/kms/nve4-nv108: Limit cursors to 128x128 While Kepler does technically support 256x256 cursors, it turns out that Kepler actually has some additional requirements for scanout surfaces that we're not enforcing correctly, which aren't present on Maxwell and later. Cursor surfaces must always use small pages (4K), and overlay surfaces must always use large pages (128K). Fixing this correctly though will take a bit more work: as we'll need to add some code in prepare_fb() to move cursor FBs in large pages to small pages, and vice-versa for overlay FBs. So until we have the time to do that, just limit cursor surfaces to 128x128 - a size small enough to always default to small pages. This means small ovlys are still broken on Kepler, but it is extremely unlikely anyone cares about those anyway :). Signed-off-by: Lyude Paul Fixes: d3b2f0f7921c ("drm/nouveau/kms/nv50-: Report max cursor size to userspace") Cc: # v5.11+ Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/dispnv50/disp.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/dispnv50/disp.c b/drivers/gpu/drm/nouveau/dispnv50/disp.c index 196612addfd6..1c9c0cdf85db 100644 --- a/drivers/gpu/drm/nouveau/dispnv50/disp.c +++ b/drivers/gpu/drm/nouveau/dispnv50/disp.c @@ -2693,9 +2693,20 @@ nv50_display_create(struct drm_device *dev) else nouveau_display(dev)->format_modifiers = disp50xx_modifiers; - if (disp->disp->object.oclass >= GK104_DISP) { + /* FIXME: 256x256 cursors are supported on Kepler, however unlike Maxwell and later + * generations Kepler requires that we use small pages (4K) for cursor scanout surfaces. The + * proper fix for this is to teach nouveau to migrate fbs being used for the cursor plane to + * small page allocations in prepare_fb(). When this is implemented, we should also force + * large pages (128K) for ovly fbs in order to fix Kepler ovlys. + * But until then, just limit cursors to 128x128 - which is small enough to avoid ever using + * large pages. + */ + if (disp->disp->object.oclass >= GM107_DISP) { dev->mode_config.cursor_width = 256; dev->mode_config.cursor_height = 256; + } else if (disp->disp->object.oclass >= GK104_DISP) { + dev->mode_config.cursor_width = 128; + dev->mode_config.cursor_height = 128; } else { dev->mode_config.cursor_width = 64; dev->mode_config.cursor_height = 64; -- cgit v1.2.3 From 8b1c9b2025491d7c86255fb773b00ecf94b53acc Mon Sep 17 00:00:00 2001 From: Tyrel Datwyler Date: Fri, 19 Mar 2021 14:50:28 -0600 Subject: scsi: ibmvfc: Fix potential race in ibmvfc_wait_for_ops() For various EH activities the ibmvfc driver uses ibmvfc_wait_for_ops() to wait for the completion of commands that match a given criteria be it cancel key, or specific LUN. With recent changes commands are completed outside the lock in bulk by removing them from the sent list and adding them to a private completion list. This introduces a potential race in ibmvfc_wait_for_ops() since the criteria for a command to be outstanding is no longer simply being on the sent list, but instead not being on the free list. Avoid this race by scanning the entire command event pool and checking that any matching command that ibmvfc needs to wait on is not already on the free list. Link: https://lore.kernel.org/r/20210319205029.312969-2-tyreld@linux.ibm.com Fixes: 1f4a4a19508d ("scsi: ibmvfc: Complete commands outside the host/queue lock") Reviewed-by: Brian King Signed-off-by: Tyrel Datwyler Signed-off-by: Martin K. Petersen --- drivers/scsi/ibmvscsi/ibmvfc.c | 42 +++++++++++++++++++++++++++++++++--------- 1 file changed, 33 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c index 6a92891ac488..94c07cc82563 100644 --- a/drivers/scsi/ibmvscsi/ibmvfc.c +++ b/drivers/scsi/ibmvscsi/ibmvfc.c @@ -2371,6 +2371,24 @@ static int ibmvfc_match_lun(struct ibmvfc_event *evt, void *device) return 0; } +/** + * ibmvfc_event_is_free - Check if event is free or not + * @evt: ibmvfc event struct + * + * Returns: + * true / false + **/ +static bool ibmvfc_event_is_free(struct ibmvfc_event *evt) +{ + struct ibmvfc_event *loop_evt; + + list_for_each_entry(loop_evt, &evt->queue->free, queue_list) + if (loop_evt == evt) + return true; + + return false; +} + /** * ibmvfc_wait_for_ops - Wait for ops to complete * @vhost: ibmvfc host struct @@ -2385,7 +2403,7 @@ static int ibmvfc_wait_for_ops(struct ibmvfc_host *vhost, void *device, { struct ibmvfc_event *evt; DECLARE_COMPLETION_ONSTACK(comp); - int wait; + int wait, i; unsigned long flags; signed long timeout = IBMVFC_ABORT_WAIT_TIMEOUT * HZ; @@ -2393,10 +2411,13 @@ static int ibmvfc_wait_for_ops(struct ibmvfc_host *vhost, void *device, do { wait = 0; spin_lock_irqsave(&vhost->crq.l_lock, flags); - list_for_each_entry(evt, &vhost->crq.sent, queue_list) { - if (match(evt, device)) { - evt->eh_comp = ∁ - wait++; + for (i = 0; i < vhost->crq.evt_pool.size; i++) { + evt = &vhost->crq.evt_pool.events[i]; + if (!ibmvfc_event_is_free(evt)) { + if (match(evt, device)) { + evt->eh_comp = ∁ + wait++; + } } } spin_unlock_irqrestore(&vhost->crq.l_lock, flags); @@ -2407,10 +2428,13 @@ static int ibmvfc_wait_for_ops(struct ibmvfc_host *vhost, void *device, if (!timeout) { wait = 0; spin_lock_irqsave(&vhost->crq.l_lock, flags); - list_for_each_entry(evt, &vhost->crq.sent, queue_list) { - if (match(evt, device)) { - evt->eh_comp = NULL; - wait++; + for (i = 0; i < vhost->crq.evt_pool.size; i++) { + evt = &vhost->crq.evt_pool.events[i]; + if (!ibmvfc_event_is_free(evt)) { + if (match(evt, device)) { + evt->eh_comp = NULL; + wait++; + } } } spin_unlock_irqrestore(&vhost->crq.l_lock, flags); -- cgit v1.2.3 From 62fc2661482b6beccfab8a5987419e96a9499fb4 Mon Sep 17 00:00:00 2001 From: Tyrel Datwyler Date: Fri, 19 Mar 2021 14:50:29 -0600 Subject: scsi: ibmvfc: Make ibmvfc_wait_for_ops() MQ aware During MQ enablement of the ibmvfc driver ibmvfc_wait_for_ops() was missed. This function is responsible for waiting on commands to complete that match a certain criteria such as LUN or cancel key. The implementation as is only scans the CRQ for events ignoring any sub-queues and as a result will exit successfully without doing anything when operating in MQ channelized mode. Check the MQ and channel use flags to determine which queues are applicable, and scan each queue accordingly. Note in MQ mode SCSI commands are only issued down sub-queues and the CRQ is only used for driver specific management commands. As such the CRQ events are ignored when operating in MQ mode with channels. Link: https://lore.kernel.org/r/20210319205029.312969-3-tyreld@linux.ibm.com Fixes: 9000cb998bcf ("scsi: ibmvfc: Enable MQ and set reasonable defaults") Reviewed-by: Brian King Signed-off-by: Tyrel Datwyler Signed-off-by: Martin K. Petersen --- drivers/scsi/ibmvscsi/ibmvfc.c | 51 ++++++++++++++++++++++++++++-------------- 1 file changed, 34 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c index 94c07cc82563..bb64e3247a6c 100644 --- a/drivers/scsi/ibmvscsi/ibmvfc.c +++ b/drivers/scsi/ibmvscsi/ibmvfc.c @@ -2403,41 +2403,58 @@ static int ibmvfc_wait_for_ops(struct ibmvfc_host *vhost, void *device, { struct ibmvfc_event *evt; DECLARE_COMPLETION_ONSTACK(comp); - int wait, i; + int wait, i, q_index, q_size; unsigned long flags; signed long timeout = IBMVFC_ABORT_WAIT_TIMEOUT * HZ; + struct ibmvfc_queue *queues; ENTER; + if (vhost->mq_enabled && vhost->using_channels) { + queues = vhost->scsi_scrqs.scrqs; + q_size = vhost->scsi_scrqs.active_queues; + } else { + queues = &vhost->crq; + q_size = 1; + } + do { wait = 0; - spin_lock_irqsave(&vhost->crq.l_lock, flags); - for (i = 0; i < vhost->crq.evt_pool.size; i++) { - evt = &vhost->crq.evt_pool.events[i]; - if (!ibmvfc_event_is_free(evt)) { - if (match(evt, device)) { - evt->eh_comp = ∁ - wait++; + spin_lock_irqsave(vhost->host->host_lock, flags); + for (q_index = 0; q_index < q_size; q_index++) { + spin_lock(&queues[q_index].l_lock); + for (i = 0; i < queues[q_index].evt_pool.size; i++) { + evt = &queues[q_index].evt_pool.events[i]; + if (!ibmvfc_event_is_free(evt)) { + if (match(evt, device)) { + evt->eh_comp = ∁ + wait++; + } } } + spin_unlock(&queues[q_index].l_lock); } - spin_unlock_irqrestore(&vhost->crq.l_lock, flags); + spin_unlock_irqrestore(vhost->host->host_lock, flags); if (wait) { timeout = wait_for_completion_timeout(&comp, timeout); if (!timeout) { wait = 0; - spin_lock_irqsave(&vhost->crq.l_lock, flags); - for (i = 0; i < vhost->crq.evt_pool.size; i++) { - evt = &vhost->crq.evt_pool.events[i]; - if (!ibmvfc_event_is_free(evt)) { - if (match(evt, device)) { - evt->eh_comp = NULL; - wait++; + spin_lock_irqsave(vhost->host->host_lock, flags); + for (q_index = 0; q_index < q_size; q_index++) { + spin_lock(&queues[q_index].l_lock); + for (i = 0; i < queues[q_index].evt_pool.size; i++) { + evt = &queues[q_index].evt_pool.events[i]; + if (!ibmvfc_event_is_free(evt)) { + if (match(evt, device)) { + evt->eh_comp = NULL; + wait++; + } } } + spin_unlock(&queues[q_index].l_lock); } - spin_unlock_irqrestore(&vhost->crq.l_lock, flags); + spin_unlock_irqrestore(vhost->host->host_lock, flags); if (wait) dev_err(vhost->dev, "Timed out waiting for aborted commands\n"); LEAVE; -- cgit v1.2.3 From 39c0c8553bfb5a3d108aa47f1256076d507605e3 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Sat, 20 Mar 2021 16:23:53 -0700 Subject: scsi: Revert "qla2xxx: Make sure that aborted commands are freed" Calling vha->hw->tgt.tgt_ops->free_cmd() from qlt_xmit_response() is wrong since the command for which a response is sent must remain valid until the SCSI target core calls .release_cmd(). It has been observed that the following scenario triggers a kernel crash: - qlt_xmit_response() calls qlt_check_reserve_free_req() - qlt_check_reserve_free_req() returns -EAGAIN - qlt_xmit_response() calls vha->hw->tgt.tgt_ops->free_cmd(cmd) - transport_handle_queue_full() tries to retransmit the response Fix this crash by reverting the patch that introduced it. Link: https://lore.kernel.org/r/20210320232359.941-2-bvanassche@acm.org Fixes: 0dcec41acb85 ("scsi: qla2xxx: Make sure that aborted commands are freed") Cc: Quinn Tran Cc: Mike Christie Reviewed-by: Daniel Wagner Reviewed-by: Himanshu Madhani Signed-off-by: Bart Van Assche Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_target.c | 13 +++++-------- drivers/scsi/qla2xxx/tcm_qla2xxx.c | 4 ---- 2 files changed, 5 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c index c48daf52725d..480e7d2dcf3e 100644 --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -3222,8 +3222,7 @@ int qlt_xmit_response(struct qla_tgt_cmd *cmd, int xmit_type, if (!qpair->fw_started || (cmd->reset_count != qpair->chip_reset) || (cmd->sess && cmd->sess->deleted)) { cmd->state = QLA_TGT_STATE_PROCESSED; - res = 0; - goto free; + return 0; } ql_dbg_qp(ql_dbg_tgt, qpair, 0xe018, @@ -3234,8 +3233,9 @@ int qlt_xmit_response(struct qla_tgt_cmd *cmd, int xmit_type, res = qlt_pre_xmit_response(cmd, &prm, xmit_type, scsi_status, &full_req_cnt); - if (unlikely(res != 0)) - goto free; + if (unlikely(res != 0)) { + return res; + } spin_lock_irqsave(qpair->qp_lock_ptr, flags); @@ -3255,8 +3255,7 @@ int qlt_xmit_response(struct qla_tgt_cmd *cmd, int xmit_type, vha->flags.online, qla2x00_reset_active(vha), cmd->reset_count, qpair->chip_reset); spin_unlock_irqrestore(qpair->qp_lock_ptr, flags); - res = 0; - goto free; + return 0; } /* Does F/W have an IOCBs for this request */ @@ -3359,8 +3358,6 @@ out_unmap_unlock: qlt_unmap_sg(vha, cmd); spin_unlock_irqrestore(qpair->qp_lock_ptr, flags); -free: - vha->hw->tgt.tgt_ops->free_cmd(cmd); return res; } EXPORT_SYMBOL(qlt_xmit_response); diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c index b55fc768a2a7..8b4890cdd4ca 100644 --- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c +++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c @@ -644,7 +644,6 @@ static int tcm_qla2xxx_queue_data_in(struct se_cmd *se_cmd) { struct qla_tgt_cmd *cmd = container_of(se_cmd, struct qla_tgt_cmd, se_cmd); - struct scsi_qla_host *vha = cmd->vha; if (cmd->aborted) { /* Cmd can loop during Q-full. tcm_qla2xxx_aborted_task @@ -657,7 +656,6 @@ static int tcm_qla2xxx_queue_data_in(struct se_cmd *se_cmd) cmd->se_cmd.transport_state, cmd->se_cmd.t_state, cmd->se_cmd.se_cmd_flags); - vha->hw->tgt.tgt_ops->free_cmd(cmd); return 0; } @@ -685,7 +683,6 @@ static int tcm_qla2xxx_queue_status(struct se_cmd *se_cmd) { struct qla_tgt_cmd *cmd = container_of(se_cmd, struct qla_tgt_cmd, se_cmd); - struct scsi_qla_host *vha = cmd->vha; int xmit_type = QLA_TGT_XMIT_STATUS; if (cmd->aborted) { @@ -699,7 +696,6 @@ static int tcm_qla2xxx_queue_status(struct se_cmd *se_cmd) cmd, kref_read(&cmd->se_cmd.cmd_kref), cmd->se_cmd.transport_state, cmd->se_cmd.t_state, cmd->se_cmd.se_cmd_flags); - vha->hw->tgt.tgt_ops->free_cmd(cmd); return 0; } cmd->bufflen = se_cmd->data_length; -- cgit v1.2.3 From f69953837ca5d98aa983a138dc0b90a411e9c763 Mon Sep 17 00:00:00 2001 From: Jia-Ju Bai Date: Sun, 7 Mar 2021 19:30:24 -0800 Subject: scsi: qedi: Fix error return code of qedi_alloc_global_queues() When kzalloc() returns NULL to qedi->global_queues[i], no error return code of qedi_alloc_global_queues() is assigned. To fix this bug, status is assigned with -ENOMEM in this case. Link: https://lore.kernel.org/r/20210308033024.27147-1-baijiaju1990@gmail.com Fixes: ace7f46ba5fd ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.") Reported-by: TOTE Robot Acked-by: Manish Rangankar Signed-off-by: Jia-Ju Bai Signed-off-by: Martin K. Petersen --- drivers/scsi/qedi/qedi_main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/scsi/qedi/qedi_main.c b/drivers/scsi/qedi/qedi_main.c index 47ad64b06623..69c5b5ee2169 100644 --- a/drivers/scsi/qedi/qedi_main.c +++ b/drivers/scsi/qedi/qedi_main.c @@ -1675,6 +1675,7 @@ static int qedi_alloc_global_queues(struct qedi_ctx *qedi) if (!qedi->global_queues[i]) { QEDI_ERR(&qedi->dbg_ctx, "Unable to allocation global queue %d.\n", i); + status = -ENOMEM; goto mem_alloc_failure; } -- cgit v1.2.3 From 3401ecf7fc1b9458a19d42c0e26a228f18ac7dda Mon Sep 17 00:00:00 2001 From: Jia-Ju Bai Date: Sun, 7 Mar 2021 19:52:41 -0800 Subject: scsi: mpt3sas: Fix error return code of mpt3sas_base_attach() When kzalloc() returns NULL, no error return code of mpt3sas_base_attach() is assigned. To fix this bug, r is assigned with -ENOMEM in this case. Link: https://lore.kernel.org/r/20210308035241.3288-1-baijiaju1990@gmail.com Fixes: c696f7b83ede ("scsi: mpt3sas: Implement device_remove_in_progress check in IOCTL path") Reported-by: TOTE Robot Signed-off-by: Jia-Ju Bai Signed-off-by: Martin K. Petersen --- drivers/scsi/mpt3sas/mpt3sas_base.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index ac066f86bb14..ac0eef975f17 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -7806,14 +7806,18 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc) ioc->pend_os_device_add_sz++; ioc->pend_os_device_add = kzalloc(ioc->pend_os_device_add_sz, GFP_KERNEL); - if (!ioc->pend_os_device_add) + if (!ioc->pend_os_device_add) { + r = -ENOMEM; goto out_free_resources; + } ioc->device_remove_in_progress_sz = ioc->pend_os_device_add_sz; ioc->device_remove_in_progress = kzalloc(ioc->device_remove_in_progress_sz, GFP_KERNEL); - if (!ioc->device_remove_in_progress) + if (!ioc->device_remove_in_progress) { + r = -ENOMEM; goto out_free_resources; + } ioc->fwfault_debug = mpt3sas_fwfault_debug; -- cgit v1.2.3 From 077ce028b8e0684d5ee7da573bd835b14b591546 Mon Sep 17 00:00:00 2001 From: Martin Wilck Date: Tue, 23 Mar 2021 22:24:30 +0100 Subject: scsi: target: pscsi: Avoid OOM in pscsi_map_sg() pscsi_map_sg() uses the variable nr_pages as a hint for bio_kmalloc() how many vector elements to allocate. If nr_pages is < BIO_MAX_PAGES, it will be reset to 0 after successful allocation of the bio. If bio_add_pc_page() fails later for whatever reason, pscsi_map_sg() tries to allocate another bio, passing nr_vecs = 0. This causes bio_add_pc_page() to fail immediately in the next call. pci_map_sg() continues to allocate zero-length bios until memory is exhausted and the kernel crashes with OOM. This can be easily observed by exporting a SATA DVD drive via pscsi. The target crashes as soon as the client tries to access the DVD LUN. In the case I analyzed, bio_add_pc_page() would fail because the DVD device's max_sectors_kb (128) was exceeded. Avoid this by simply not resetting nr_pages to 0 after allocating the bio. This way, the client receives an I/O error when it tries to send requests exceeding the devices max_sectors_kb, and eventually gets it right. The client must still limit max_sectors_kb e.g. by an udev rule if (like in my case) the driver doesn't report valid block limits, otherwise it encounters I/O errors. Link: https://lore.kernel.org/r/20210323212431.15306-1-mwilck@suse.com Reviewed-by: Christoph Hellwig Reviewed-by: Lee Duncan Signed-off-by: Martin Wilck Signed-off-by: Martin K. Petersen --- drivers/target/target_core_pscsi.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c index 3cbc074992bc..6fa9fddc2e1e 100644 --- a/drivers/target/target_core_pscsi.c +++ b/drivers/target/target_core_pscsi.c @@ -882,7 +882,6 @@ pscsi_map_sg(struct se_cmd *cmd, struct scatterlist *sgl, u32 sgl_nents, if (!bio) { new_bio: nr_vecs = bio_max_segs(nr_pages); - nr_pages -= nr_vecs; /* * Calls bio_kmalloc() and sets bio->bi_end_io() */ -- cgit v1.2.3 From 36fa766faa0c822c860e636fe82b1affcd022974 Mon Sep 17 00:00:00 2001 From: Martin Wilck Date: Tue, 23 Mar 2021 22:24:31 +0100 Subject: scsi: target: pscsi: Clean up after failure in pscsi_map_sg() If pscsi_map_sg() fails, make sure to drop references to already allocated bios. Link: https://lore.kernel.org/r/20210323212431.15306-2-mwilck@suse.com Reviewed-by: Christoph Hellwig Reviewed-by: Lee Duncan Signed-off-by: Martin Wilck Signed-off-by: Martin K. Petersen --- drivers/target/target_core_pscsi.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c index 6fa9fddc2e1e..9ee797b8cb7e 100644 --- a/drivers/target/target_core_pscsi.c +++ b/drivers/target/target_core_pscsi.c @@ -938,6 +938,14 @@ new_bio: return 0; fail: + if (bio) + bio_put(bio); + while (req->bio) { + bio = req->bio; + req->bio = bio->bi_next; + bio_put(bio); + } + req->biotail = NULL; return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; } -- cgit v1.2.3 From 69c3ed7282a143439bbc2d03dc00d49c68fcb629 Mon Sep 17 00:00:00 2001 From: Pan Bian Date: Wed, 20 Jan 2021 01:16:08 -0800 Subject: drm/imx: fix memory leak when fails to init Put DRM device on initialization failure path rather than directly return error code. Fixes: a67d5088ceb8 ("drm/imx: drop explicit drm_mode_config_cleanup") Signed-off-by: Pan Bian Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/imx-drm-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/imx/imx-drm-core.c b/drivers/gpu/drm/imx/imx-drm-core.c index d1a9841adeed..e6a88c8cbd69 100644 --- a/drivers/gpu/drm/imx/imx-drm-core.c +++ b/drivers/gpu/drm/imx/imx-drm-core.c @@ -215,7 +215,7 @@ static int imx_drm_bind(struct device *dev) ret = drmm_mode_config_init(drm); if (ret) - return ret; + goto err_kms; ret = drm_vblank_init(drm, MAX_CRTC); if (ret) -- cgit v1.2.3 From 12d0ca80bffdad9e9b2a7a68784bfca54c8cf1a1 Mon Sep 17 00:00:00 2001 From: Liu Ying Date: Mon, 22 Mar 2021 10:56:40 +0800 Subject: drm/imx: imx-ldb: Register LDB channel1 when it is the only channel to be used LDB channel1 should be registered if it is the only channel to be used. Without this patch, imx_ldb_bind() would skip registering LDB channel1 if LDB channel0 is not used, no matter LDB channel1 needs to be used or not. Fixes: 8767f4711b2b (drm/imx: imx-ldb: move initialization into probe) Signed-off-by: Liu Ying Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/imx-ldb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/imx/imx-ldb.c b/drivers/gpu/drm/imx/imx-ldb.c index dbfe39e2f7f6..b794ed448ea3 100644 --- a/drivers/gpu/drm/imx/imx-ldb.c +++ b/drivers/gpu/drm/imx/imx-ldb.c @@ -583,7 +583,7 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data) struct imx_ldb_channel *channel = &imx_ldb->channel[i]; if (!channel->ldb) - break; + continue; ret = imx_ldb_register(drm, channel); if (ret) -- cgit v1.2.3 From 33ce7f2f95cabb5834cf0906308a5cb6103976da Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 24 Mar 2021 17:47:41 +0100 Subject: drm/imx: imx-ldb: fix out of bounds array access warning When CONFIG_OF is disabled, building with 'make W=1' produces warnings about out of bounds array access: drivers/gpu/drm/imx/imx-ldb.c: In function 'imx_ldb_set_clock.constprop': drivers/gpu/drm/imx/imx-ldb.c:186:8: error: array subscript -22 is below array bounds of 'struct clk *[4]' [-Werror=array-bounds] Add an error check before the index is used, which helps with the warning, as well as any possible other error condition that may be triggered at runtime. The warning could be fixed by adding a Kconfig depedency on CONFIG_OF, but Liu Ying points out that the driver may hit the out-of-bounds problem at runtime anyway. Signed-off-by: Arnd Bergmann Reviewed-by: Liu Ying Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/imx-ldb.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/imx/imx-ldb.c b/drivers/gpu/drm/imx/imx-ldb.c index b794ed448ea3..ffdc492c5bc5 100644 --- a/drivers/gpu/drm/imx/imx-ldb.c +++ b/drivers/gpu/drm/imx/imx-ldb.c @@ -197,6 +197,11 @@ static void imx_ldb_encoder_enable(struct drm_encoder *encoder) int dual = ldb->ldb_ctrl & LDB_SPLIT_MODE_EN; int mux = drm_of_encoder_active_port_id(imx_ldb_ch->child, encoder); + if (mux < 0 || mux >= ARRAY_SIZE(ldb->clk_sel)) { + dev_warn(ldb->dev, "%s: invalid mux %d\n", __func__, mux); + return; + } + drm_panel_prepare(imx_ldb_ch->panel); if (dual) { @@ -255,6 +260,11 @@ imx_ldb_encoder_atomic_mode_set(struct drm_encoder *encoder, int mux = drm_of_encoder_active_port_id(imx_ldb_ch->child, encoder); u32 bus_format = imx_ldb_ch->bus_format; + if (mux < 0 || mux >= ARRAY_SIZE(ldb->clk_sel)) { + dev_warn(ldb->dev, "%s: invalid mux %d\n", __func__, mux); + return; + } + if (mode->clock > 170000) { dev_warn(ldb->dev, "%s: mode exceeds 170 MHz pixel clock\n", __func__); -- cgit v1.2.3 From 58b5ada8c465b5f1300bc021ebd3d3b8149124b4 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 23 Mar 2021 14:17:13 +0100 Subject: pinctrl: qcom: fix unintentional string concatenation clang is clearly correct to point out a typo in a silly array of strings: drivers/pinctrl/qcom/pinctrl-sdx55.c:426:61: error: suspicious concatenation of string literals in an array initialization; did you mean to separate the elements with a comma? [-Werror,-Wstring-concatenation] "gpio14", "gpio15", "gpio16", "gpio17", "gpio18", "gpio19" "gpio20", "gpio21", "gpio22", ^ Add the missing comma that must have accidentally been removed. Fixes: ac43c44a7a37 ("pinctrl: qcom: Add SDX55 pincontrol driver") Signed-off-by: Arnd Bergmann Reviewed-by: Bjorn Andersson Reviewed-by: Nathan Chancellor Link: https://lore.kernel.org/r/20210323131728.2702789-1-arnd@kernel.org Signed-off-by: Linus Walleij --- drivers/pinctrl/qcom/pinctrl-sdx55.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pinctrl/qcom/pinctrl-sdx55.c b/drivers/pinctrl/qcom/pinctrl-sdx55.c index 2b5b0e2b03ad..5aaf57b40407 100644 --- a/drivers/pinctrl/qcom/pinctrl-sdx55.c +++ b/drivers/pinctrl/qcom/pinctrl-sdx55.c @@ -423,7 +423,7 @@ static const char * const gpio_groups[] = { static const char * const qdss_stm_groups[] = { "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7", "gpio12", "gpio13", - "gpio14", "gpio15", "gpio16", "gpio17", "gpio18", "gpio19" "gpio20", "gpio21", "gpio22", + "gpio14", "gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21", "gpio22", "gpio23", "gpio44", "gpio45", "gpio52", "gpio53", "gpio56", "gpio57", "gpio61", "gpio62", "gpio63", "gpio64", "gpio65", "gpio66", }; -- cgit v1.2.3 From 39c1f1bd8adf29840ef52225ce95f390e3d7b2cf Mon Sep 17 00:00:00 2001 From: Roger Pau Monne Date: Thu, 25 Mar 2021 10:09:47 +0100 Subject: pinctrl: intel: check REVID register value for device presence MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Use the value read from the REVID register in order to check for the presence of the device. A read of all ones is treated as if the device is not present, and hence probing is ended. This fixes an issue when running as a Xen PVH dom0, where the ACPI DSDT table is provided unmodified to dom0 and hence contains the pinctrl devices, but the MMIO region(s) containing the device registers might not be mapped in the guest physical memory map if such region(s) are not exposed on a PCI device BAR or marked as reserved in the host memory map. Fixes: 91d898e51e60 ("pinctrl: intel: Convert capability list to features") Suggested-by: Andy Shevchenko Signed-off-by: Roger Pau Monné Signed-off-by: Andy Shevchenko --- drivers/pinctrl/intel/pinctrl-intel.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pinctrl/intel/pinctrl-intel.c b/drivers/pinctrl/intel/pinctrl-intel.c index 7283203861ae..9f3361c13ded 100644 --- a/drivers/pinctrl/intel/pinctrl-intel.c +++ b/drivers/pinctrl/intel/pinctrl-intel.c @@ -1493,8 +1493,13 @@ static int intel_pinctrl_probe(struct platform_device *pdev, if (IS_ERR(regs)) return PTR_ERR(regs); - /* Determine community features based on the revision */ + /* + * Determine community features based on the revision. + * A value of all ones means the device is not present. + */ value = readl(regs + REVID); + if (value == ~0u) + return -ENODEV; if (((value & REVID_MASK) >> REVID_SHIFT) >= 0x94) { community->features |= PINCTRL_FEATURE_DEBOUNCE; community->features |= PINCTRL_FEATURE_1K_PD; -- cgit v1.2.3 From 3408be145a5d6418ff955fe5badde652be90e700 Mon Sep 17 00:00:00 2001 From: Potnuri Bharat Teja Date: Thu, 25 Mar 2021 00:34:53 +0530 Subject: RDMA/cxgb4: Fix adapter LE hash errors while destroying ipv6 listening server Not setting the ipv6 bit while destroying ipv6 listening servers may result in potential fatal adapter errors due to lookup engine memory hash errors. Therefore always set ipv6 field while destroying ipv6 listening servers. Fixes: 830662f6f032 ("RDMA/cxgb4: Add support for active and passive open connection with IPv6 address") Link: https://lore.kernel.org/r/20210324190453.8171-1-bharat@chelsio.com Signed-off-by: Potnuri Bharat Teja Reviewed-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/cxgb4/cm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c index 8769e7aa097f..81903749d241 100644 --- a/drivers/infiniband/hw/cxgb4/cm.c +++ b/drivers/infiniband/hw/cxgb4/cm.c @@ -3610,13 +3610,13 @@ int c4iw_destroy_listen(struct iw_cm_id *cm_id) ep->com.local_addr.ss_family == AF_INET) { err = cxgb4_remove_server_filter( ep->com.dev->rdev.lldi.ports[0], ep->stid, - ep->com.dev->rdev.lldi.rxq_ids[0], 0); + ep->com.dev->rdev.lldi.rxq_ids[0], false); } else { struct sockaddr_in6 *sin6; c4iw_init_wr_wait(ep->com.wr_waitp); err = cxgb4_remove_server( ep->com.dev->rdev.lldi.ports[0], ep->stid, - ep->com.dev->rdev.lldi.rxq_ids[0], 0); + ep->com.dev->rdev.lldi.rxq_ids[0], true); if (err) goto done; err = c4iw_wait_for_reply(&ep->com.dev->rdev, ep->com.wr_waitp, -- cgit v1.2.3 From 37df9f3fedb6aeaff5564145e8162aab912c9284 Mon Sep 17 00:00:00 2001 From: Lv Yunlong Date: Wed, 24 Mar 2021 03:37:24 -0700 Subject: video: hyperv_fb: Fix a double free in hvfb_probe Function hvfb_probe() calls hvfb_getmem(), expecting upon return that info->apertures is either NULL or points to memory that should be freed by framebuffer_release(). But hvfb_getmem() is freeing the memory and leaving the pointer non-NULL, resulting in a double free if an error occurs or later if hvfb_remove() is called. Fix this by removing all kfree(info->apertures) calls in hvfb_getmem(). This will allow framebuffer_release() to free the memory, which follows the pattern of other fbdev drivers. Fixes: 3a6fb6c4255c ("video: hyperv: hyperv_fb: Use physical memory for fb on HyperV Gen 1 VMs.") Signed-off-by: Lv Yunlong Reviewed-by: Michael Kelley Link: https://lore.kernel.org/r/20210324103724.4189-1-lyl2019@mail.ustc.edu.cn Signed-off-by: Wei Liu --- drivers/video/fbdev/hyperv_fb.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/video/fbdev/hyperv_fb.c b/drivers/video/fbdev/hyperv_fb.c index c8b0ae676809..4dc9077dd2ac 100644 --- a/drivers/video/fbdev/hyperv_fb.c +++ b/drivers/video/fbdev/hyperv_fb.c @@ -1031,7 +1031,6 @@ static int hvfb_getmem(struct hv_device *hdev, struct fb_info *info) PCI_DEVICE_ID_HYPERV_VIDEO, NULL); if (!pdev) { pr_err("Unable to find PCI Hyper-V video\n"); - kfree(info->apertures); return -ENODEV; } @@ -1129,7 +1128,6 @@ getmem_done: } else { pci_dev_put(pdev); } - kfree(info->apertures); return 0; @@ -1141,7 +1139,6 @@ err2: err1: if (!gen2vm) pci_dev_put(pdev); - kfree(info->apertures); return -ENOMEM; } -- cgit v1.2.3 From 90449e98c265296329446c7abcd2aae3b20c0bc9 Mon Sep 17 00:00:00 2001 From: Mateusz Palczewski Date: Mon, 4 Jan 2021 15:00:02 +0000 Subject: i40e: Added Asym_Pause to supported link modes Add Asym_Pause to supported link modes (it is supported by HW). Lack of Asym_Pause in supported modes can cause several problems, i.e. it won't be possible to turn the autonegotiation on with asymmetric pause settings (i.e. Tx on, Rx off). Fixes: 4e91bcd5d47a ("i40e: Finish implementation of ethtool get settings") Signed-off-by: Dawid Lukwinski Signed-off-by: Mateusz Palczewski Reviewed-by: Aleksandr Loktionov Reviewed-by: Przemyslaw Patynowski Tested-by: Tony Brelinski Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c index c70dec65a572..2c637a5678b3 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c +++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c @@ -1101,6 +1101,7 @@ static int i40e_get_link_ksettings(struct net_device *netdev, /* Set flow control settings */ ethtool_link_ksettings_add_link_mode(ks, supported, Pause); + ethtool_link_ksettings_add_link_mode(ks, supported, Asym_Pause); switch (hw->fc.requested_mode) { case I40E_FC_FULL: -- cgit v1.2.3 From 60c988bc154108bd522a21289e389143006a1ff0 Mon Sep 17 00:00:00 2001 From: Daniel Jordan Date: Wed, 24 Mar 2021 21:05:52 -0400 Subject: vfio/type1: Empty batch for pfnmap pages When vfio_pin_pages_remote() returns with a partial batch consisting of a single VM_PFNMAP pfn, a subsequent call will unfortunately try restoring it from batch->pages, resulting in vfio mapping the wrong page and unbalancing the page refcount. Prevent the function from returning with this kind of partial batch to avoid the issue. There's no explicit check for a VM_PFNMAP pfn because it's awkward to do so, so infer it from characteristics of the batch instead. This may result in occasional false positives but keeps the code simpler. Fixes: 4d83de6da265 ("vfio/type1: Batch page pinning") Link: https://lkml.kernel.org/r/20210323133254.33ed9161@omen.home.shazbot.org/ Reported-by: Alex Williamson Suggested-by: Alex Williamson Signed-off-by: Daniel Jordan Message-Id: <20210325010552.185481-1-daniel.m.jordan@oracle.com> Signed-off-by: Alex Williamson --- drivers/vfio/vfio_iommu_type1.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/vfio/vfio_iommu_type1.c b/drivers/vfio/vfio_iommu_type1.c index be444407664a..45cbfd4879a5 100644 --- a/drivers/vfio/vfio_iommu_type1.c +++ b/drivers/vfio/vfio_iommu_type1.c @@ -739,6 +739,12 @@ out: ret = vfio_lock_acct(dma, lock_acct, false); unpin_out: + if (batch->size == 1 && !batch->offset) { + /* May be a VM_PFNMAP pfn, which the batch can't remember. */ + put_pfn(pfn, dma->prot); + batch->size = 0; + } + if (ret < 0) { if (pinned && !rsvd) { for (pfn = *pfn_base ; pinned ; pfn++, pinned--) -- cgit v1.2.3 From 347b5650cd158d1d953487cc2bec567af5c5bf96 Mon Sep 17 00:00:00 2001 From: Eryk Rybak Date: Thu, 18 Feb 2021 11:15:26 +0000 Subject: i40e: Fix kernel oops when i40e driver removes VF's Fix the reason of kernel oops when i40e driver removed VFs. Added new __I40E_VFS_RELEASING state to signalize releasing process by PF, that it makes possible to exit of reset VF procedure. Without this patch, it is possible to suspend the VFs reset by releasing VFs resources procedure. Retrying the reset after the timeout works on the freed VF memory causing a kernel oops. Fixes: d43d60e5eb95 ("i40e: ensure reset occurs when disabling VF") Signed-off-by: Eryk Rybak Signed-off-by: Grzegorz Szczurek Reviewed-by: Aleksandr Loktionov Tested-by: Konrad Jankowski Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/i40e/i40e.h | 1 + drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 9 +++++++++ 2 files changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h index cd53981fa5e0..15f93b355099 100644 --- a/drivers/net/ethernet/intel/i40e/i40e.h +++ b/drivers/net/ethernet/intel/i40e/i40e.h @@ -142,6 +142,7 @@ enum i40e_state_t { __I40E_VIRTCHNL_OP_PENDING, __I40E_RECOVERY_MODE, __I40E_VF_RESETS_DISABLED, /* disable resets during i40e_remove */ + __I40E_VFS_RELEASING, /* This must be last as it determines the size of the BITMAP */ __I40E_STATE_SIZE__, }; diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c index 1b6ec9be155a..5d301a466f5c 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c +++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c @@ -137,6 +137,7 @@ void i40e_vc_notify_vf_reset(struct i40e_vf *vf) **/ static inline void i40e_vc_disable_vf(struct i40e_vf *vf) { + struct i40e_pf *pf = vf->pf; int i; i40e_vc_notify_vf_reset(vf); @@ -147,6 +148,11 @@ static inline void i40e_vc_disable_vf(struct i40e_vf *vf) * ensure a reset. */ for (i = 0; i < 20; i++) { + /* If PF is in VFs releasing state reset VF is impossible, + * so leave it. + */ + if (test_bit(__I40E_VFS_RELEASING, pf->state)) + return; if (i40e_reset_vf(vf, false)) return; usleep_range(10000, 20000); @@ -1574,6 +1580,8 @@ void i40e_free_vfs(struct i40e_pf *pf) if (!pf->vf) return; + + set_bit(__I40E_VFS_RELEASING, pf->state); while (test_and_set_bit(__I40E_VF_DISABLE, pf->state)) usleep_range(1000, 2000); @@ -1631,6 +1639,7 @@ void i40e_free_vfs(struct i40e_pf *pf) } } clear_bit(__I40E_VF_DISABLE, pf->state); + clear_bit(__I40E_VFS_RELEASING, pf->state); } #ifdef CONFIG_PCI_IOV -- cgit v1.2.3 From f2916ae9a1bc80aa8e9e8a00b75682f5df6fd59c Mon Sep 17 00:00:00 2001 From: Arkadiusz Kubalewski Date: Thu, 18 Feb 2021 21:55:35 +0000 Subject: i40e: Fix oops at i40e_rebuild() Setup TC before the i40e_setup_pf_switch() call. Memory must be initialized for all the queues before using its resources. Previously it could be possible that a call: xdp_rxq_info_reg(&rx_ring->xdp_rxq, rx_ring->netdev, rx_ring->queue_index, rx_ring->q_vector->napi.napi_id); was made with q_vector being null. Oops could show up with the following sequence: - no driver loaded - FW LLDP agent is on (flag disable-fw-lldp:off) - link is up - DCB configured with number of Traffic Classes that will not divide completely the default number of queues (usually cpu cores) - driver load - set private flag: disable-fw-lldp:on Fixes: 4b208eaa8078 ("i40e: Add init and default config of software based DCB") Fixes: b02e5a0ebb17 ("xsk: Propagate napi_id to XDP socket Rx path") Signed-off-by: Aleksandr Loktionov Signed-off-by: Arkadiusz Kubalewski Tested-by: Tony Brelinski Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/i40e/i40e_main.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 17f3b800640e..f67f0cc9dadf 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -10573,12 +10573,6 @@ static void i40e_rebuild(struct i40e_pf *pf, bool reinit, bool lock_acquired) goto end_core_reset; } - if (!lock_acquired) - rtnl_lock(); - ret = i40e_setup_pf_switch(pf, reinit); - if (ret) - goto end_unlock; - #ifdef CONFIG_I40E_DCB /* Enable FW to write a default DCB config on link-up * unless I40E_FLAG_TC_MQPRIO was enabled or DCB @@ -10607,6 +10601,11 @@ static void i40e_rebuild(struct i40e_pf *pf, bool reinit, bool lock_acquired) } #endif /* CONFIG_I40E_DCB */ + if (!lock_acquired) + rtnl_lock(); + ret = i40e_setup_pf_switch(pf, reinit); + if (ret) + goto end_unlock; /* The driver only wants link up/down and module qualification * reports from firmware. Note the negative logic. -- cgit v1.2.3 From de9c7854e6e1589f639c6352112956d08243b659 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 24 Mar 2021 14:05:36 +0100 Subject: net: axienet: allow setups without MDIO In setups with fixed-link settings there is no mdio node in DTS. axienet_probe() already handles that gracefully but lp->mii_bus is then NULL. Fix code that tries to blindly grab the MDIO lock by introducing two helper functions that make the locking conditional. Signed-off-by: Daniel Mack Reviewed-by: Radhey Shyam Pandey Signed-off-by: David S. Miller --- drivers/net/ethernet/xilinx/xilinx_axienet.h | 12 ++++++++++++ drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 12 ++++++------ 2 files changed, 18 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/ethernet/xilinx/xilinx_axienet.h index 1e966a39967e..aca7f82f6791 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet.h +++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h @@ -504,6 +504,18 @@ static inline u32 axinet_ior_read_mcr(struct axienet_local *lp) return axienet_ior(lp, XAE_MDIO_MCR_OFFSET); } +static inline void axienet_lock_mii(struct axienet_local *lp) +{ + if (lp->mii_bus) + mutex_lock(&lp->mii_bus->mdio_lock); +} + +static inline void axienet_unlock_mii(struct axienet_local *lp) +{ + if (lp->mii_bus) + mutex_unlock(&lp->mii_bus->mdio_lock); +} + /** * axienet_iow - Memory mapped Axi Ethernet register write * @lp: Pointer to axienet local structure diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c index 5d677db0aee5..f8f8654ea728 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -1053,9 +1053,9 @@ static int axienet_open(struct net_device *ndev) * including the MDIO. MDIO must be disabled before resetting. * Hold MDIO bus lock to avoid MDIO accesses during the reset. */ - mutex_lock(&lp->mii_bus->mdio_lock); + axienet_lock_mii(lp); ret = axienet_device_reset(ndev); - mutex_unlock(&lp->mii_bus->mdio_lock); + axienet_unlock_mii(lp); ret = phylink_of_phy_connect(lp->phylink, lp->dev->of_node, 0); if (ret) { @@ -1148,9 +1148,9 @@ static int axienet_stop(struct net_device *ndev) } /* Do a reset to ensure DMA is really stopped */ - mutex_lock(&lp->mii_bus->mdio_lock); + axienet_lock_mii(lp); __axienet_device_reset(lp); - mutex_unlock(&lp->mii_bus->mdio_lock); + axienet_unlock_mii(lp); cancel_work_sync(&lp->dma_err_task); @@ -1709,9 +1709,9 @@ static void axienet_dma_err_handler(struct work_struct *work) * including the MDIO. MDIO must be disabled before resetting. * Hold MDIO bus lock to avoid MDIO accesses during the reset. */ - mutex_lock(&lp->mii_bus->mdio_lock); + axienet_lock_mii(lp); __axienet_device_reset(lp); - mutex_unlock(&lp->mii_bus->mdio_lock); + axienet_unlock_mii(lp); for (i = 0; i < lp->tx_bd_num; i++) { cur_p = &lp->tx_bd_v[i]; -- cgit v1.2.3 From 3e6fdeb28f4c331acbd27bdb0effc4befd4ef8e8 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Wed, 24 Mar 2021 20:36:04 +0100 Subject: net: dsa: lantiq_gswip: Let GSWIP automatically set the xMII clock The xMII interface clock depends on the PHY interface (MII, RMII, RGMII) as well as the current link speed. Explicitly configure the GSWIP to automatically select the appropriate xMII interface clock. This fixes an issue seen by some users where ports using an external RMII or RGMII PHY were deaf (no RX or TX traffic could be seen). Most likely this is due to an "invalid" xMII clock being selected either by the bootloader or hardware-defaults. Fixes: 14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Signed-off-by: Martin Blumenstingl Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/dsa/lantiq_gswip.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c index 52e865a3912c..809dfa3be6bb 100644 --- a/drivers/net/dsa/lantiq_gswip.c +++ b/drivers/net/dsa/lantiq_gswip.c @@ -799,10 +799,15 @@ static int gswip_setup(struct dsa_switch *ds) /* Configure the MDIO Clock 2.5 MHz */ gswip_mdio_mask(priv, 0xff, 0x09, GSWIP_MDIO_MDC_CFG1); - /* Disable the xMII link */ - for (i = 0; i < priv->hw_info->max_ports; i++) + for (i = 0; i < priv->hw_info->max_ports; i++) { + /* Disable the xMII link */ gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_EN, 0, i); + /* Automatically select the xMII interface clock */ + gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_RATE_MASK, + GSWIP_MII_CFG_RATE_AUTO, i); + } + /* enable special tag insertion on cpu port */ gswip_switch_mask(priv, 0, GSWIP_FDMA_PCTRL_STEN, GSWIP_FDMA_PCTRLp(cpu_port)); -- cgit v1.2.3 From d75135082698140a26a56defe1bbc1b06f26a41f Mon Sep 17 00:00:00 2001 From: Shyam Sundar S K Date: Thu, 25 Mar 2021 08:39:12 +0530 Subject: amd-xgbe: Update DMA coherency values Based on the IOMMU configuration, the current cache control settings can result in possible coherency issues. The hardware team has recommended new settings for the PCI device path to eliminate the issue. Fixes: 6f595959c095 ("amd-xgbe: Adjust register settings to improve performance") Signed-off-by: Shyam Sundar S K Acked-by: Tom Lendacky Signed-off-by: David S. Miller --- drivers/net/ethernet/amd/xgbe/xgbe.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/amd/xgbe/xgbe.h b/drivers/net/ethernet/amd/xgbe/xgbe.h index ba8321ec1ee7..3305979a9f7c 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe.h +++ b/drivers/net/ethernet/amd/xgbe/xgbe.h @@ -180,9 +180,9 @@ #define XGBE_DMA_SYS_AWCR 0x30303030 /* DMA cache settings - PCI device */ -#define XGBE_DMA_PCI_ARCR 0x00000003 -#define XGBE_DMA_PCI_AWCR 0x13131313 -#define XGBE_DMA_PCI_AWARCR 0x00000313 +#define XGBE_DMA_PCI_ARCR 0x000f0f0f +#define XGBE_DMA_PCI_AWCR 0x0f0f0f0f +#define XGBE_DMA_PCI_AWARCR 0x00000f0f /* DMA channel interrupt modes */ #define XGBE_IRQ_MODE_EDGE 0 -- cgit v1.2.3 From 30a93d2b7d5a7cbb53ac19c9364a256d1aa6c08a Mon Sep 17 00:00:00 2001 From: Antoine Tenart Date: Thu, 25 Mar 2021 16:35:32 +0100 Subject: vxlan: do not modify the shared tunnel info when PMTU triggers an ICMP reply When the interface is part of a bridge or an Open vSwitch port and a packet exceed a PMTU estimate, an ICMP reply is sent to the sender. When using the external mode (collect metadata) the source and destination addresses are reversed, so that Open vSwitch can match the packet against an existing (reverse) flow. But inverting the source and destination addresses in the shared ip_tunnel_info will make following packets of the flow to use a wrong destination address (packets will be tunnelled to itself), if the flow isn't updated. Which happens with Open vSwitch, until the flow times out. Fixes this by uncloning the skb's ip_tunnel_info before inverting its source and destination addresses, so that the modification will only be made for the PTMU packet, not the following ones. Fixes: fc68c99577cc ("vxlan: Support for PMTU discovery on directly bridged links") Tested-by: Eelco Chaudron Reviewed-by: Eelco Chaudron Signed-off-by: Antoine Tenart Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index 666dd201c3d5..53dbc67e8a34 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -2725,12 +2725,17 @@ static void vxlan_xmit_one(struct sk_buff *skb, struct net_device *dev, goto tx_error; } else if (err) { if (info) { + struct ip_tunnel_info *unclone; struct in_addr src, dst; + unclone = skb_tunnel_info_unclone(skb); + if (unlikely(!unclone)) + goto tx_error; + src = remote_ip.sin.sin_addr; dst = local_ip.sin.sin_addr; - info->key.u.ipv4.src = src.s_addr; - info->key.u.ipv4.dst = dst.s_addr; + unclone->key.u.ipv4.src = src.s_addr; + unclone->key.u.ipv4.dst = dst.s_addr; } vxlan_encap_bypass(skb, vxlan, vxlan, vni, false); dst_release(ndst); @@ -2781,12 +2786,17 @@ static void vxlan_xmit_one(struct sk_buff *skb, struct net_device *dev, goto tx_error; } else if (err) { if (info) { + struct ip_tunnel_info *unclone; struct in6_addr src, dst; + unclone = skb_tunnel_info_unclone(skb); + if (unlikely(!unclone)) + goto tx_error; + src = remote_ip.sin6.sin6_addr; dst = local_ip.sin6.sin6_addr; - info->key.u.ipv6.src = src; - info->key.u.ipv6.dst = dst; + unclone->key.u.ipv6.src = src; + unclone->key.u.ipv6.dst = dst; } vxlan_encap_bypass(skb, vxlan, vxlan, vni, false); -- cgit v1.2.3 From 68c1a943ef37bafde5ea2383e8ca224c7169ee31 Mon Sep 17 00:00:00 2001 From: Antoine Tenart Date: Thu, 25 Mar 2021 16:35:33 +0100 Subject: geneve: do not modify the shared tunnel info when PMTU triggers an ICMP reply When the interface is part of a bridge or an Open vSwitch port and a packet exceed a PMTU estimate, an ICMP reply is sent to the sender. When using the external mode (collect metadata) the source and destination addresses are reversed, so that Open vSwitch can match the packet against an existing (reverse) flow. But inverting the source and destination addresses in the shared ip_tunnel_info will make following packets of the flow to use a wrong destination address (packets will be tunnelled to itself), if the flow isn't updated. Which happens with Open vSwitch, until the flow times out. Fixes this by uncloning the skb's ip_tunnel_info before inverting its source and destination addresses, so that the modification will only be made for the PTMU packet, not the following ones. Fixes: c1a800e88dbf ("geneve: Support for PMTU discovery on directly bridged links") Tested-by: Eelco Chaudron Reviewed-by: Eelco Chaudron Signed-off-by: Antoine Tenart Signed-off-by: David S. Miller --- drivers/net/geneve.c | 24 ++++++++++++++++++++---- 1 file changed, 20 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c index 4ac0373326ef..d5b1e48e0c09 100644 --- a/drivers/net/geneve.c +++ b/drivers/net/geneve.c @@ -908,8 +908,16 @@ static int geneve_xmit_skb(struct sk_buff *skb, struct net_device *dev, info = skb_tunnel_info(skb); if (info) { - info->key.u.ipv4.dst = fl4.saddr; - info->key.u.ipv4.src = fl4.daddr; + struct ip_tunnel_info *unclone; + + unclone = skb_tunnel_info_unclone(skb); + if (unlikely(!unclone)) { + dst_release(&rt->dst); + return -ENOMEM; + } + + unclone->key.u.ipv4.dst = fl4.saddr; + unclone->key.u.ipv4.src = fl4.daddr; } if (!pskb_may_pull(skb, ETH_HLEN)) { @@ -993,8 +1001,16 @@ static int geneve6_xmit_skb(struct sk_buff *skb, struct net_device *dev, struct ip_tunnel_info *info = skb_tunnel_info(skb); if (info) { - info->key.u.ipv6.dst = fl6.saddr; - info->key.u.ipv6.src = fl6.daddr; + struct ip_tunnel_info *unclone; + + unclone = skb_tunnel_info_unclone(skb); + if (unlikely(!unclone)) { + dst_release(dst); + return -ENOMEM; + } + + unclone->key.u.ipv6.dst = fl6.saddr; + unclone->key.u.ipv6.src = fl6.daddr; } if (!pskb_may_pull(skb, ETH_HLEN)) { -- cgit v1.2.3 From 52762efa2b256ed1c5274e5177cbd52ee11a2f6a Mon Sep 17 00:00:00 2001 From: Lv Yunlong Date: Mon, 22 Mar 2021 18:46:56 -0700 Subject: gpu/xen: Fix a use after free in xen_drm_drv_init In function displback_changed, has the call chain displback_connect(front_info)->xen_drm_drv_init(front_info). We can see that drm_info is assigned to front_info->drm_info and drm_info is freed in fail branch in xen_drm_drv_init(). Later displback_disconnect(front_info) is called and it calls xen_drm_drv_fini(front_info) cause a use after free by drm_info = front_info->drm_info statement. My patch has done two things. First fixes the fail label which drm_info = kzalloc() failed and still free the drm_info. Second sets front_info->drm_info to NULL to avoid uaf. Signed-off-by: Lv Yunlong Reviewed-by: Oleksandr Andrushchenko Signed-off-by: Oleksandr Andrushchenko Link: https://patchwork.freedesktop.org/patch/msgid/20210323014656.10068-1-lyl2019@mail.ustc.edu.cn --- drivers/gpu/drm/xen/xen_drm_front.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/xen/xen_drm_front.c b/drivers/gpu/drm/xen/xen_drm_front.c index 30d9adf31c84..9f14d99c763c 100644 --- a/drivers/gpu/drm/xen/xen_drm_front.c +++ b/drivers/gpu/drm/xen/xen_drm_front.c @@ -521,7 +521,7 @@ static int xen_drm_drv_init(struct xen_drm_front_info *front_info) drm_dev = drm_dev_alloc(&xen_drm_driver, dev); if (IS_ERR(drm_dev)) { ret = PTR_ERR(drm_dev); - goto fail; + goto fail_dev; } drm_info->drm_dev = drm_dev; @@ -551,8 +551,10 @@ fail_modeset: drm_kms_helper_poll_fini(drm_dev); drm_mode_config_cleanup(drm_dev); drm_dev_put(drm_dev); -fail: +fail_dev: kfree(drm_info); + front_info->drm_info = NULL; +fail: return ret; } -- cgit v1.2.3 From 014305d001987a0eeada6bac610a8665f92aae24 Mon Sep 17 00:00:00 2001 From: Wan Jiabing Date: Thu, 25 Mar 2021 14:19:01 +0800 Subject: drivers: gpu: drm: xen_drm_front_drm_info is declared twice struct xen_drm_front_drm_info has been declared. Remove the duplicate. Signed-off-by: Wan Jiabing Reviewed-by: Oleksandr Andrushchenko Signed-off-by: Oleksandr Andrushchenko Link: https://patchwork.freedesktop.org/patch/msgid/20210325061901.851273-1-wanjiabing@vivo.com --- drivers/gpu/drm/xen/xen_drm_front_conn.h | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/xen/xen_drm_front_conn.h b/drivers/gpu/drm/xen/xen_drm_front_conn.h index 3adacba9a23b..e5f4314899ee 100644 --- a/drivers/gpu/drm/xen/xen_drm_front_conn.h +++ b/drivers/gpu/drm/xen/xen_drm_front_conn.h @@ -16,7 +16,6 @@ struct drm_connector; struct xen_drm_front_drm_info; -struct xen_drm_front_drm_info; int xen_drm_front_conn_init(struct xen_drm_front_drm_info *drm_info, struct drm_connector *connector); -- cgit v1.2.3 From 1cc5ed25bdade86de2650a82b2730108a76de20c Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Wed, 24 Mar 2021 17:06:54 -0600 Subject: usbip: vhci_hcd fix shift out-of-bounds in vhci_hub_control() Fix shift out-of-bounds in vhci_hub_control() SetPortFeature handling. UBSAN: shift-out-of-bounds in drivers/usb/usbip/vhci_hcd.c:605:42 shift exponent 768 is too large for 32-bit type 'int' Reported-by: syzbot+3dea30b047f41084de66@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by: Shuah Khan Link: https://lore.kernel.org/r/20210324230654.34798-1-skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/usbip/vhci_hcd.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c index 3209b5ddd30c..a20a8380ca0c 100644 --- a/drivers/usb/usbip/vhci_hcd.c +++ b/drivers/usb/usbip/vhci_hcd.c @@ -594,6 +594,8 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, pr_err("invalid port number %d\n", wIndex); goto error; } + if (wValue >= 32) + goto error; if (hcd->speed == HCD_USB3) { if ((vhci_hcd->port_status[rhport] & USB_SS_PORT_STAT_POWER) != 0) { -- cgit v1.2.3 From 5aef629704ad4d983ecf5c8a25840f16e45b6d59 Mon Sep 17 00:00:00 2001 From: Wesley Cheng Date: Wed, 24 Mar 2021 11:31:04 -0700 Subject: usb: dwc3: gadget: Clear DEP flags after stop transfers in ep disable Ensure that dep->flags are cleared until after stop active transfers is completed. Otherwise, the ENDXFER command will not be executed during ep disable. Fixes: f09ddcfcb8c5 ("usb: dwc3: gadget: Prevent EP queuing while stopping transfers") Cc: stable Reported-and-tested-by: Andy Shevchenko Tested-by: Marek Szyprowski Signed-off-by: Wesley Cheng Link: https://lore.kernel.org/r/1616610664-16495-1-git-send-email-wcheng@codeaurora.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/gadget.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 4c15c3fce303..c7ef218e7a8c 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -791,10 +791,6 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep) reg &= ~DWC3_DALEPENA_EP(dep->number); dwc3_writel(dwc->regs, DWC3_DALEPENA, reg); - dep->stream_capable = false; - dep->type = 0; - dep->flags = 0; - /* Clear out the ep descriptors for non-ep0 */ if (dep->number > 1) { dep->endpoint.comp_desc = NULL; @@ -803,6 +799,10 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep) dwc3_remove_requests(dwc, dep); + dep->stream_capable = false; + dep->type = 0; + dep->flags = 0; + return 0; } -- cgit v1.2.3 From 6f978a30c9bb12dab1302d0f06951ee290f5e600 Mon Sep 17 00:00:00 2001 From: Chunfeng Yun Date: Tue, 23 Mar 2021 15:02:46 +0800 Subject: usb: xhci-mtk: fix broken streams issue on 0.96 xHCI The MediaTek 0.96 xHCI controller on some platforms does not support bulk stream even HCCPARAMS says supporting, due to MaxPSASize is set a default value 1 by mistake, here use XHCI_BROKEN_STREAMS quirk to fix it. Fixes: 94a631d91ad3 ("usb: xhci-mtk: check hcc_params after adding primary hcd") Cc: stable Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/1616482975-17841-4-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-mtk.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c index fe010cc61f19..2f27dc0d9c6b 100644 --- a/drivers/usb/host/xhci-mtk.c +++ b/drivers/usb/host/xhci-mtk.c @@ -397,6 +397,13 @@ static void xhci_mtk_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_SPURIOUS_SUCCESS; if (mtk->lpm_support) xhci->quirks |= XHCI_LPM_SUPPORT; + + /* + * MTK xHCI 0.96: PSA is 1 by default even if doesn't support stream, + * and it's 3 when support it. + */ + if (xhci->hci_version < 0x100 && HCC_MAX_PSA(xhci->hcc_params) == 4) + xhci->quirks |= XHCI_BROKEN_STREAMS; } /* called during probe() after chip reset completes */ @@ -548,7 +555,8 @@ static int xhci_mtk_probe(struct platform_device *pdev) if (ret) goto put_usb3_hcd; - if (HCC_MAX_PSA(xhci->hcc_params) >= 4) + if (HCC_MAX_PSA(xhci->hcc_params) >= 4 && + !(xhci->quirks & XHCI_BROKEN_STREAMS)) xhci->shared_hcd->can_do_streams = 1; ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED); -- cgit v1.2.3 From 92af4fc6ec331228aca322ca37c8aea7b150a151 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 24 Mar 2021 09:11:41 +0200 Subject: usb: musb: Fix suspend with devices connected for a64 Pinephone running on Allwinner A64 fails to suspend with USB devices connected as reported by Bhushan Shah . Reverting commit 5fbf7a253470 ("usb: musb: fix idling for suspend after disconnect interrupt") fixes the issue. Let's add suspend checks also for suspend after disconnect interrupt quirk handling like we already do elsewhere. Fixes: 5fbf7a253470 ("usb: musb: fix idling for suspend after disconnect interrupt") Reported-by: Bhushan Shah Tested-by: Bhushan Shah Signed-off-by: Tony Lindgren Link: https://lore.kernel.org/r/20210324071142.42264-1-tony@atomide.com Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 1cd87729ba60..fc0457db62e1 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -2004,10 +2004,14 @@ static void musb_pm_runtime_check_session(struct musb *musb) MUSB_DEVCTL_HR; switch (devctl & ~s) { case MUSB_QUIRK_B_DISCONNECT_99: - musb_dbg(musb, "Poll devctl in case of suspend after disconnect\n"); - schedule_delayed_work(&musb->irq_work, - msecs_to_jiffies(1000)); - break; + if (musb->quirk_retries && !musb->flush_irq_work) { + musb_dbg(musb, "Poll devctl in case of suspend after disconnect\n"); + schedule_delayed_work(&musb->irq_work, + msecs_to_jiffies(1000)); + musb->quirk_retries--; + break; + } + fallthrough; case MUSB_QUIRK_B_INVALID_VBUS_91: if (musb->quirk_retries && !musb->flush_irq_work) { musb_dbg(musb, -- cgit v1.2.3 From 5e3bbae8ee3d677a0aa2919dc62b5c60ea01ba61 Mon Sep 17 00:00:00 2001 From: Artur Petrosyan Date: Fri, 26 Mar 2021 14:24:46 +0400 Subject: usb: dwc2: Fix HPRT0.PrtSusp bit setting for HiKey 960 board. Increased the waiting timeout for HPRT0.PrtSusp register field to be set, because on HiKey 960 board HPRT0.PrtSusp wasn't generated with the existing timeout. Cc: # 4.18 Fixes: 22bb5cfdf13a ("usb: dwc2: Fix host exit from hibernation flow.") Signed-off-by: Artur Petrosyan Acked-by: Minas Harutyunyan Link: https://lore.kernel.org/r/20210326102447.8F7FEA005D@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc2/hcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index fc3269f5faf1..40e5655921bf 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -5398,7 +5398,7 @@ int dwc2_host_enter_hibernation(struct dwc2_hsotg *hsotg) dwc2_writel(hsotg, hprt0, HPRT0); /* Wait for the HPRT0.PrtSusp register field to be set */ - if (dwc2_hsotg_wait_bit_set(hsotg, HPRT0, HPRT0_SUSP, 3000)) + if (dwc2_hsotg_wait_bit_set(hsotg, HPRT0, HPRT0_SUSP, 5000)) dev_warn(hsotg->dev, "Suspend wasn't generated\n"); /* -- cgit v1.2.3 From 93f672804bf2d7a49ef3fd96827ea6290ca1841e Mon Sep 17 00:00:00 2001 From: Artur Petrosyan Date: Fri, 26 Mar 2021 14:25:09 +0400 Subject: usb: dwc2: Prevent core suspend when port connection flag is 0 In host mode port connection status flag is "0" when loading the driver. After loading the driver system asserts suspend which is handled by "_dwc2_hcd_suspend()" function. Before the system suspend the port connection status is "0". As result need to check the "port_connect_status" if it is "0", then skipping entering to suspend. Cc: # 5.2 Fixes: 6f6d70597c15 ("usb: dwc2: bus suspend/resume for hosts with DWC2_POWER_DOWN_PARAM_NONE") Signed-off-by: Artur Petrosyan Link: https://lore.kernel.org/r/20210326102510.BDEDEA005D@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc2/hcd.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index 40e5655921bf..1a9789ec5847 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -4322,7 +4322,8 @@ static int _dwc2_hcd_suspend(struct usb_hcd *hcd) if (hsotg->op_state == OTG_STATE_B_PERIPHERAL) goto unlock; - if (hsotg->params.power_down > DWC2_POWER_DOWN_PARAM_PARTIAL) + if (hsotg->params.power_down != DWC2_POWER_DOWN_PARAM_PARTIAL || + hsotg->flags.b.port_connect_status == 0) goto skip_power_saving; /* -- cgit v1.2.3 From 29d96eb261345c8d888e248ae79484e681be2faa Mon Sep 17 00:00:00 2001 From: Roja Rani Yarubandi Date: Wed, 24 Mar 2021 15:48:35 +0530 Subject: soc: qcom-geni-se: Cleanup the code to remove proxy votes This reverts commit 048eb908a1f2 ("soc: qcom-geni-se: Add interconnect support to fix earlycon crash") ICC core and platforms drivers supports sync_state feature, which ensures that the default ICC BW votes from the bootloader is not removed until all it's consumers are probes. The proxy votes were needed in case other QUP child drivers I2C, SPI probes before UART, they can turn off the QUP-CORE clock which is shared resources for all QUP driver, this causes unclocked access to HW from earlycon. Given above support from ICC there is no longer need to maintain proxy votes on QUP-CORE ICC node from QUP wrapper driver for early console usecase, the default votes won't be removed until real console is probed. Cc: stable@vger.kernel.org Fixes: 266cd33b5913 ("interconnect: qcom: Ensure that the floor bandwidth value is enforced") Fixes: 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state") Signed-off-by: Roja Rani Yarubandi Signed-off-by: Akash Asthana Reviewed-by: Matthias Kaehlcke Link: https://lore.kernel.org/r/20210324101836.25272-2-rojay@codeaurora.org Signed-off-by: Greg Kroah-Hartman --- drivers/soc/qcom/qcom-geni-se.c | 74 ----------------------------------- drivers/tty/serial/qcom_geni_serial.c | 7 ---- 2 files changed, 81 deletions(-) (limited to 'drivers') diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c index f42954e2c98e..1fd29f93ff6d 100644 --- a/drivers/soc/qcom/qcom-geni-se.c +++ b/drivers/soc/qcom/qcom-geni-se.c @@ -3,7 +3,6 @@ #include #include -#include #include #include #include @@ -92,14 +91,11 @@ struct geni_wrapper { struct device *dev; void __iomem *base; struct clk_bulk_data ahb_clks[NUM_AHB_CLKS]; - struct geni_icc_path to_core; }; static const char * const icc_path_names[] = {"qup-core", "qup-config", "qup-memory"}; -static struct geni_wrapper *earlycon_wrapper; - #define QUP_HW_VER_REG 0x4 /* Common SE registers */ @@ -843,44 +839,11 @@ int geni_icc_disable(struct geni_se *se) } EXPORT_SYMBOL(geni_icc_disable); -void geni_remove_earlycon_icc_vote(void) -{ - struct platform_device *pdev; - struct geni_wrapper *wrapper; - struct device_node *parent; - struct device_node *child; - - if (!earlycon_wrapper) - return; - - wrapper = earlycon_wrapper; - parent = of_get_next_parent(wrapper->dev->of_node); - for_each_child_of_node(parent, child) { - if (!of_device_is_compatible(child, "qcom,geni-se-qup")) - continue; - - pdev = of_find_device_by_node(child); - if (!pdev) - continue; - - wrapper = platform_get_drvdata(pdev); - icc_put(wrapper->to_core.path); - wrapper->to_core.path = NULL; - - } - of_node_put(parent); - - earlycon_wrapper = NULL; -} -EXPORT_SYMBOL(geni_remove_earlycon_icc_vote); - static int geni_se_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct resource *res; struct geni_wrapper *wrapper; - struct console __maybe_unused *bcon; - bool __maybe_unused has_earlycon = false; int ret; wrapper = devm_kzalloc(dev, sizeof(*wrapper), GFP_KERNEL); @@ -903,43 +866,6 @@ static int geni_se_probe(struct platform_device *pdev) } } -#ifdef CONFIG_SERIAL_EARLYCON - for_each_console(bcon) { - if (!strcmp(bcon->name, "qcom_geni")) { - has_earlycon = true; - break; - } - } - if (!has_earlycon) - goto exit; - - wrapper->to_core.path = devm_of_icc_get(dev, "qup-core"); - if (IS_ERR(wrapper->to_core.path)) - return PTR_ERR(wrapper->to_core.path); - /* - * Put minmal BW request on core clocks on behalf of early console. - * The vote will be removed earlycon exit function. - * - * Note: We are putting vote on each QUP wrapper instead only to which - * earlycon is connected because QUP core clock of different wrapper - * share same voltage domain. If core1 is put to 0, then core2 will - * also run at 0, if not voted. Default ICC vote will be removed ASA - * we touch any of the core clock. - * core1 = core2 = max(core1, core2) - */ - ret = icc_set_bw(wrapper->to_core.path, GENI_DEFAULT_BW, - GENI_DEFAULT_BW); - if (ret) { - dev_err(&pdev->dev, "%s: ICC BW voting failed for core: %d\n", - __func__, ret); - return ret; - } - - if (of_get_compatible_child(pdev->dev.of_node, "qcom,geni-debug-uart")) - earlycon_wrapper = wrapper; - of_node_put(pdev->dev.of_node); -exit: -#endif dev_set_drvdata(dev, wrapper); dev_dbg(dev, "GENI SE Driver probed\n"); return devm_of_platform_populate(dev); diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 291649f02821..0d85b55ea823 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -1177,12 +1177,6 @@ static inline void qcom_geni_serial_enable_early_read(struct geni_se *se, struct console *con) { } #endif -static int qcom_geni_serial_earlycon_exit(struct console *con) -{ - geni_remove_earlycon_icc_vote(); - return 0; -} - static struct qcom_geni_private_data earlycon_private_data; static int __init qcom_geni_serial_earlycon_setup(struct earlycon_device *dev, @@ -1233,7 +1227,6 @@ static int __init qcom_geni_serial_earlycon_setup(struct earlycon_device *dev, writel(stop_bit_len, uport->membase + SE_UART_TX_STOP_BIT_LEN); dev->con->write = qcom_geni_serial_earlycon_write; - dev->con->exit = qcom_geni_serial_earlycon_exit; dev->con->setup = NULL; qcom_geni_serial_enable_early_read(&se, dev->con); -- cgit v1.2.3 From a846738f8c3788d846ed1f587270d2f2e3d32432 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Fri, 26 Mar 2021 16:33:53 +0100 Subject: xen-blkback: don't leak persistent grants from xen_blkbk_map() The fix for XSA-365 zapped too many of the ->persistent_gnt[] entries. Ones successfully obtained should not be overwritten, but instead left for xen_blkbk_unmap_prepare() to pick up and put. This is XSA-371. Signed-off-by: Jan Beulich Cc: stable@vger.kernel.org Reviewed-by: Juergen Gross Reviewed-by: Wei Liu Signed-off-by: Juergen Gross --- drivers/block/xen-blkback/blkback.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/block/xen-blkback/blkback.c b/drivers/block/xen-blkback/blkback.c index da16121140ca..3874233f7194 100644 --- a/drivers/block/xen-blkback/blkback.c +++ b/drivers/block/xen-blkback/blkback.c @@ -891,7 +891,7 @@ next: out: for (i = last_map; i < num; i++) { /* Don't zap current batch's valid persistent grants. */ - if(i >= last_map + segs_to_map) + if(i >= map_until) pages[i]->persistent_gnt = NULL; pages[i]->handle = BLKBACK_INVALID_HANDLE; } -- cgit v1.2.3 From a95d8f581901c560ff1b63bc02107eb34a6efb1b Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 26 Mar 2021 13:07:21 +0100 Subject: cpufreq: Fix scaling_{available,boost}_frequencies_show() comments The function names in the comment blocks for the functions scaling_available_frequencies_show() and scaling_boost_frequencies_show() do not match the actual names. Fixes: 6f19efc0a1ca08bc ("cpufreq: Add boost frequency support in core") Signed-off-by: Geert Uytterhoeven Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/freq_table.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/freq_table.c b/drivers/cpufreq/freq_table.c index d3f756f7b5a0..67e56cf638ef 100644 --- a/drivers/cpufreq/freq_table.c +++ b/drivers/cpufreq/freq_table.c @@ -267,7 +267,7 @@ struct freq_attr cpufreq_freq_attr_##_name##_freqs = \ __ATTR_RO(_name##_frequencies) /* - * show_scaling_available_frequencies - show available normal frequencies for + * scaling_available_frequencies_show - show available normal frequencies for * the specified CPU */ static ssize_t scaling_available_frequencies_show(struct cpufreq_policy *policy, @@ -279,7 +279,7 @@ cpufreq_attr_available_freq(scaling_available); EXPORT_SYMBOL_GPL(cpufreq_freq_attr_scaling_available_freqs); /* - * show_available_boost_freqs - show available boost frequencies for + * scaling_boost_frequencies_show - show available boost frequencies for * the specified CPU */ static ssize_t scaling_boost_frequencies_show(struct cpufreq_policy *policy, -- cgit v1.2.3 From 4edbe1d7bcffcd6269f3b5eb63f710393ff2ec7a Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Fri, 26 Mar 2021 14:32:32 -0400 Subject: dm ioctl: fix out of bounds array access when no devices If there are not any dm devices, we need to zero the "dev" argument in the first structure dm_name_list. However, this can cause out of bounds write, because the "needed" variable is zero and len may be less than eight. Fix this bug by reporting DM_BUFFER_FULL_FLAG if the result buffer is too small to hold the "nl->dev" value. Signed-off-by: Mikulas Patocka Reported-by: Dan Carpenter Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer --- drivers/md/dm-ioctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/dm-ioctl.c b/drivers/md/dm-ioctl.c index 5e306bba4375..1ca65b434f1f 100644 --- a/drivers/md/dm-ioctl.c +++ b/drivers/md/dm-ioctl.c @@ -529,7 +529,7 @@ static int list_devices(struct file *filp, struct dm_ioctl *param, size_t param_ * Grab our output buffer. */ nl = orig_nl = get_result_buffer(param, param_size, &len); - if (len < needed) { + if (len < needed || len < sizeof(nl->dev)) { param->flags |= DM_BUFFER_FULL_FLAG; goto out; } -- cgit v1.2.3 From cf97d7af246831ea23c216f17205f91319afc85f Mon Sep 17 00:00:00 2001 From: Pawel Laszczak Date: Mon, 22 Mar 2021 06:47:14 +0100 Subject: usb: cdnsp: Fixes issue with dequeuing requests after disabling endpoint Patch fixes the bug: BUG: kernel NULL pointer dereference, address: 0000000000000050 PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 0 PID: 4137 Comm: uvc-gadget Tainted: G OE 5.10.0-next-20201214+ #3 Hardware name: ASUS All Series/Q87T, BIOS 0908 07/22/2014 RIP: 0010:cdnsp_remove_request+0xe9/0x530 [cdnsp_udc_pci] Code: 01 00 00 31 f6 48 89 df e8 64 d4 ff ff 48 8b 43 08 48 8b 13 45 31 f6 48 89 42 08 48 89 10 b8 98 ff ff ff 48 89 1b 48 89 5b 08 <41> 83 6d 50 01 41 83 af d0 00 00 00 01 41 f6 84 24 78 20 00 00 08 RSP: 0018:ffffb68d00d07b60 EFLAGS: 00010046 RAX: 00000000ffffff98 RBX: ffff9d29c57fbf00 RCX: 0000000000001400 RDX: ffff9d29c57fbf00 RSI: 0000000000000000 RDI: ffff9d29c57fbf00 RBP: ffffb68d00d07bb0 R08: ffff9d2ad9510a00 R09: ffff9d2ac011c000 R10: ffff9d2a12b6e760 R11: 0000000000000000 R12: ffff9d29d3fb8000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff9d29d3fb88c0 FS: 0000000000000000(0000) GS:ffff9d2adba00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000050 CR3: 0000000102164005 CR4: 00000000001706f0 Call Trace: cdnsp_ep_dequeue+0x3c/0x90 [cdnsp_udc_pci] cdnsp_gadget_ep_dequeue+0x3f/0x80 [cdnsp_udc_pci] usb_ep_dequeue+0x21/0x70 [udc_core] uvcg_video_enable+0x19d/0x220 [usb_f_uvc] uvc_v4l2_release+0x49/0x90 [usb_f_uvc] v4l2_release+0xa5/0x100 [videodev] __fput+0x99/0x250 ____fput+0xe/0x10 task_work_run+0x75/0xb0 do_exit+0x370/0xb80 do_group_exit+0x43/0xa0 get_signal+0x12d/0x820 arch_do_signal_or_restart+0xb2/0x870 ? __switch_to_asm+0x36/0x70 ? kern_select+0xc6/0x100 exit_to_user_mode_prepare+0xfc/0x170 syscall_exit_to_user_mode+0x2a/0x40 do_syscall_64+0x43/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fe969cf5dd7 Code: Unable to access opcode bytes at RIP 0x7fe969cf5dad. Problem occurs for UVC class. During disconnecting the UVC class disable endpoints and then start dequeuing all requests. This leads to situation where requests are removed twice. The first one in cdnsp_gadget_ep_disable and the second in cdnsp_gadget_ep_dequeue function. Patch adds condition in cdnsp_gadget_ep_dequeue function which allows dequeue requests only from enabled endpoint. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Signed-off-by: Pawel Laszczak Signed-off-by: Peter Chen --- drivers/usb/cdns3/cdnsp-gadget.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/cdns3/cdnsp-gadget.c b/drivers/usb/cdns3/cdnsp-gadget.c index f2ebbacd932e..d7d4bdd57f46 100644 --- a/drivers/usb/cdns3/cdnsp-gadget.c +++ b/drivers/usb/cdns3/cdnsp-gadget.c @@ -1128,6 +1128,10 @@ static int cdnsp_gadget_ep_dequeue(struct usb_ep *ep, return -ESHUTDOWN; } + /* Requests has been dequeued during disabling endpoint. */ + if (!(pep->ep_state & EP_ENABLED)) + return 0; + spin_lock_irqsave(&pdev->lock, flags); ret = cdnsp_ep_dequeue(pep, to_cdnsp_request(request)); spin_unlock_irqrestore(&pdev->lock, flags); -- cgit v1.2.3 From 781bab3238c21c8cc6d1999a6ee43de76252fdfd Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Fri, 26 Mar 2021 15:19:27 -0700 Subject: Input: elants_i2c - fix division by zero if firmware reports zero phys size Touchscreen firmware of ASUS Transformer TF700T reports zeros for the phys size. Hence check whether the size is zero and don't set the resolution in this case. Reported-by: Jasper Korten Signed-off-by: Dmitry Osipenko Link: https://lore.kernel.org/r/20210302100824.3423-1-digetx@gmail.com Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/elants_i2c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c index 4c2b579f6c8b..78172c31529a 100644 --- a/drivers/input/touchscreen/elants_i2c.c +++ b/drivers/input/touchscreen/elants_i2c.c @@ -1441,7 +1441,7 @@ static int elants_i2c_probe(struct i2c_client *client, touchscreen_parse_properties(ts->input, true, &ts->prop); - if (ts->chip_id == EKTF3624) { + if (ts->chip_id == EKTF3624 && ts->phy_x && ts->phy_y) { /* calculate resolution from size */ ts->x_res = DIV_ROUND_CLOSEST(ts->prop.max_x, ts->phy_x); ts->y_res = DIV_ROUND_CLOSEST(ts->prop.max_y, ts->phy_y); -- cgit v1.2.3 From 1b479fb801602b22512f53c19b1f93a4fc5d5d9d Mon Sep 17 00:00:00 2001 From: Lv Yunlong Date: Sun, 28 Mar 2021 00:50:08 -0700 Subject: drivers/net/wan/hdlc_fr: Fix a double free in pvc_xmit In pvc_xmit, if __skb_pad(skb, pad, false) failed, it will free the skb in the first time and goto drop. But the same skb is freed by kfree_skb(skb) in the second time in drop. Maintaining the original function unchanged, my patch adds a new label out to avoid the double free if __skb_pad() failed. Fixes: f5083d0cee08a ("drivers/net/wan/hdlc_fr: Improvements to the code of pvc_xmit") Signed-off-by: Lv Yunlong Signed-off-by: David S. Miller --- drivers/net/wan/hdlc_fr.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c index 0720f5f92caa..4d9dc7d15908 100644 --- a/drivers/net/wan/hdlc_fr.c +++ b/drivers/net/wan/hdlc_fr.c @@ -415,7 +415,7 @@ static netdev_tx_t pvc_xmit(struct sk_buff *skb, struct net_device *dev) if (pad > 0) { /* Pad the frame with zeros */ if (__skb_pad(skb, pad, false)) - goto drop; + goto out; skb_put(skb, pad); } } @@ -448,8 +448,9 @@ static netdev_tx_t pvc_xmit(struct sk_buff *skb, struct net_device *dev) return NETDEV_TX_OK; drop: - dev->stats.tx_dropped++; kfree_skb(skb); +out: + dev->stats.tx_dropped++; return NETDEV_TX_OK; } -- cgit v1.2.3 From 56cfe6f820a6315291eb5a1b82bb49633b993d3b Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Sun, 28 Mar 2021 22:57:48 -0700 Subject: Input: elants_i2c - drop zero-checking of ABS_MT_TOUCH_MAJOR resolution Drop unnecessary zero-checking of ABS_MT_TOUCH_MAJOR resolution since there is no difference between setting resolution to 0 vs not setting it at all. This change makes code cleaner a tad. Suggested-by: Dmitry Torokhov Signed-off-by: Dmitry Osipenko Link: https://lore.kernel.org/r/20210328235507.19240-1-digetx@gmail.com Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/elants_i2c.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c index 78172c31529a..5f7706febcb0 100644 --- a/drivers/input/touchscreen/elants_i2c.c +++ b/drivers/input/touchscreen/elants_i2c.c @@ -1449,8 +1449,7 @@ static int elants_i2c_probe(struct i2c_client *client, input_abs_set_res(ts->input, ABS_MT_POSITION_X, ts->x_res); input_abs_set_res(ts->input, ABS_MT_POSITION_Y, ts->y_res); - if (ts->major_res > 0) - input_abs_set_res(ts->input, ABS_MT_TOUCH_MAJOR, ts->major_res); + input_abs_set_res(ts->input, ABS_MT_TOUCH_MAJOR, ts->major_res); error = input_mt_init_slots(ts->input, MAX_CONTACT_NUM, INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); -- cgit v1.2.3 From 6161a435c1910d07ee00cc25af010889010e1f08 Mon Sep 17 00:00:00 2001 From: Tian Tao Date: Mon, 15 Mar 2021 14:41:26 +0800 Subject: drm/exynos/decon5433: Remove the unused include statements This driver doesn't reference of_gpio.h, so drop it. Signed-off-by: Tian Tao Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos5433_drm_decon.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c index 1f79bc2a881e..1510e4e2973c 100644 --- a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c +++ b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include #include -- cgit v1.2.3 From 08771bce330036d473be6ce851cd00bcd351ebf6 Mon Sep 17 00:00:00 2001 From: Anirudh Venkataramanan Date: Fri, 26 Feb 2021 13:19:22 -0800 Subject: ice: Continue probe on link/PHY errors An incorrect NVM update procedure can result in the driver failing probe. In this case, the recommended resolution method is to update the NVM using the right procedure. However, if the driver fails probe, the user will not be able to update the NVM. So do not fail probe on link/PHY errors. Fixes: 1a3571b5938c ("ice: restore PHY settings on media insertion") Signed-off-by: Anirudh Venkataramanan Tested-by: Tony Brelinski Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice_main.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c index 2c23c8f468a5..53e053c997eb 100644 --- a/drivers/net/ethernet/intel/ice/ice_main.c +++ b/drivers/net/ethernet/intel/ice/ice_main.c @@ -4192,28 +4192,25 @@ ice_probe(struct pci_dev *pdev, const struct pci_device_id __always_unused *ent) goto err_send_version_unroll; } + /* not a fatal error if this fails */ err = ice_init_nvm_phy_type(pf->hw.port_info); - if (err) { + if (err) dev_err(dev, "ice_init_nvm_phy_type failed: %d\n", err); - goto err_send_version_unroll; - } + /* not a fatal error if this fails */ err = ice_update_link_info(pf->hw.port_info); - if (err) { + if (err) dev_err(dev, "ice_update_link_info failed: %d\n", err); - goto err_send_version_unroll; - } ice_init_link_dflt_override(pf->hw.port_info); /* if media available, initialize PHY settings */ if (pf->hw.port_info->phy.link_info.link_info & ICE_AQ_MEDIA_AVAILABLE) { + /* not a fatal error if this fails */ err = ice_init_phy_user_cfg(pf->hw.port_info); - if (err) { + if (err) dev_err(dev, "ice_init_phy_user_cfg failed: %d\n", err); - goto err_send_version_unroll; - } if (!test_bit(ICE_FLAG_LINK_DOWN_ON_CLOSE_ENA, pf->flags)) { struct ice_vsi *vsi = ice_get_main_vsi(pf); -- cgit v1.2.3 From f88c529ac77b3c21819d2cf1dfcfae1937849743 Mon Sep 17 00:00:00 2001 From: Fabio Pricoco Date: Fri, 26 Feb 2021 13:19:24 -0800 Subject: ice: Increase control queue timeout 250 msec timeout is insufficient for some AQ commands. Advice from FW team was to increase the timeout. Increase to 1 second. Fixes: 7ec59eeac804 ("ice: Add support for control queues") Signed-off-by: Fabio Pricoco Tested-by: Tony Brelinski Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice_controlq.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ice/ice_controlq.h b/drivers/net/ethernet/intel/ice/ice_controlq.h index faaa08e8171b..68866f4f0eb0 100644 --- a/drivers/net/ethernet/intel/ice/ice_controlq.h +++ b/drivers/net/ethernet/intel/ice/ice_controlq.h @@ -31,8 +31,8 @@ enum ice_ctl_q { ICE_CTL_Q_MAILBOX, }; -/* Control Queue timeout settings - max delay 250ms */ -#define ICE_CTL_Q_SQ_CMD_TIMEOUT 2500 /* Count 2500 times */ +/* Control Queue timeout settings - max delay 1s */ +#define ICE_CTL_Q_SQ_CMD_TIMEOUT 10000 /* Count 10000 times */ #define ICE_CTL_Q_SQ_CMD_USEC 100 /* Check every 100usec */ #define ICE_CTL_Q_ADMIN_INIT_TIMEOUT 10 /* Count 10 times */ #define ICE_CTL_Q_ADMIN_INIT_MSEC 100 /* Check every 100msec */ -- cgit v1.2.3 From aeac8ce864d9c0836e12ed5b5cc80f62f3cccb7c Mon Sep 17 00:00:00 2001 From: Chinh T Cao Date: Fri, 26 Feb 2021 13:19:25 -0800 Subject: ice: Recognize 860 as iSCSI port in CEE mode iSCSI can use both TCP ports 860 and 3260. However, in our current implementation, the ice_aqc_opc_get_cee_dcb_cfg (0x0A07) AQ command doesn't provide a way to communicate the protocol port number to the AQ's caller. Thus, we assume that 3260 is the iSCSI port number at the AQ's caller layer. Rely on the dcbx-willing mode, desired QoS and remote QoS configuration to determine which port number that iSCSI will use. Fixes: 0ebd3ff13cca ("ice: Add code for DCB initialization part 2/4") Signed-off-by: Chinh T Cao Tested-by: Tony Brelinski Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice_dcb.c | 38 +++++++++++++++++++++++-------- drivers/net/ethernet/intel/ice/ice_type.h | 1 + 2 files changed, 30 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ice/ice_dcb.c b/drivers/net/ethernet/intel/ice/ice_dcb.c index e42727941ef5..211ac6f907ad 100644 --- a/drivers/net/ethernet/intel/ice/ice_dcb.c +++ b/drivers/net/ethernet/intel/ice/ice_dcb.c @@ -738,22 +738,27 @@ ice_aq_get_cee_dcb_cfg(struct ice_hw *hw, /** * ice_cee_to_dcb_cfg * @cee_cfg: pointer to CEE configuration struct - * @dcbcfg: DCB configuration struct + * @pi: port information structure * * Convert CEE configuration from firmware to DCB configuration */ static void ice_cee_to_dcb_cfg(struct ice_aqc_get_cee_dcb_cfg_resp *cee_cfg, - struct ice_dcbx_cfg *dcbcfg) + struct ice_port_info *pi) { u32 status, tlv_status = le32_to_cpu(cee_cfg->tlv_status); u32 ice_aqc_cee_status_mask, ice_aqc_cee_status_shift; + u8 i, j, err, sync, oper, app_index, ice_app_sel_type; u16 app_prio = le16_to_cpu(cee_cfg->oper_app_prio); - u8 i, err, sync, oper, app_index, ice_app_sel_type; u16 ice_aqc_cee_app_mask, ice_aqc_cee_app_shift; + struct ice_dcbx_cfg *cmp_dcbcfg, *dcbcfg; u16 ice_app_prot_id_type; - /* CEE PG data to ETS config */ + dcbcfg = &pi->qos_cfg.local_dcbx_cfg; + dcbcfg->dcbx_mode = ICE_DCBX_MODE_CEE; + dcbcfg->tlv_status = tlv_status; + + /* CEE PG data */ dcbcfg->etscfg.maxtcs = cee_cfg->oper_num_tc; /* Note that the FW creates the oper_prio_tc nibbles reversed @@ -780,10 +785,16 @@ ice_cee_to_dcb_cfg(struct ice_aqc_get_cee_dcb_cfg_resp *cee_cfg, } } - /* CEE PFC data to ETS config */ + /* CEE PFC data */ dcbcfg->pfc.pfcena = cee_cfg->oper_pfc_en; dcbcfg->pfc.pfccap = ICE_MAX_TRAFFIC_CLASS; + /* CEE APP TLV data */ + if (dcbcfg->app_mode == ICE_DCBX_APPS_NON_WILLING) + cmp_dcbcfg = &pi->qos_cfg.desired_dcbx_cfg; + else + cmp_dcbcfg = &pi->qos_cfg.remote_dcbx_cfg; + app_index = 0; for (i = 0; i < 3; i++) { if (i == 0) { @@ -802,6 +813,18 @@ ice_cee_to_dcb_cfg(struct ice_aqc_get_cee_dcb_cfg_resp *cee_cfg, ice_aqc_cee_app_shift = ICE_AQC_CEE_APP_ISCSI_S; ice_app_sel_type = ICE_APP_SEL_TCPIP; ice_app_prot_id_type = ICE_APP_PROT_ID_ISCSI; + + for (j = 0; j < cmp_dcbcfg->numapps; j++) { + u16 prot_id = cmp_dcbcfg->app[j].prot_id; + u8 sel = cmp_dcbcfg->app[j].selector; + + if (sel == ICE_APP_SEL_TCPIP && + (prot_id == ICE_APP_PROT_ID_ISCSI || + prot_id == ICE_APP_PROT_ID_ISCSI_860)) { + ice_app_prot_id_type = prot_id; + break; + } + } } else { /* FIP APP */ ice_aqc_cee_status_mask = ICE_AQC_CEE_FIP_STATUS_M; @@ -892,11 +915,8 @@ enum ice_status ice_get_dcb_cfg(struct ice_port_info *pi) ret = ice_aq_get_cee_dcb_cfg(pi->hw, &cee_cfg, NULL); if (!ret) { /* CEE mode */ - dcbx_cfg = &pi->qos_cfg.local_dcbx_cfg; - dcbx_cfg->dcbx_mode = ICE_DCBX_MODE_CEE; - dcbx_cfg->tlv_status = le32_to_cpu(cee_cfg.tlv_status); - ice_cee_to_dcb_cfg(&cee_cfg, dcbx_cfg); ret = ice_get_ieee_or_cee_dcb_cfg(pi, ICE_DCBX_MODE_CEE); + ice_cee_to_dcb_cfg(&cee_cfg, pi); } else if (pi->hw->adminq.sq_last_status == ICE_AQ_RC_ENOENT) { /* CEE mode not enabled try querying IEEE data */ dcbx_cfg = &pi->qos_cfg.local_dcbx_cfg; diff --git a/drivers/net/ethernet/intel/ice/ice_type.h b/drivers/net/ethernet/intel/ice/ice_type.h index a6cb0c35748c..266036b7a49a 100644 --- a/drivers/net/ethernet/intel/ice/ice_type.h +++ b/drivers/net/ethernet/intel/ice/ice_type.h @@ -535,6 +535,7 @@ struct ice_dcb_app_priority_table { #define ICE_TLV_STATUS_ERR 0x4 #define ICE_APP_PROT_ID_FCOE 0x8906 #define ICE_APP_PROT_ID_ISCSI 0x0cbc +#define ICE_APP_PROT_ID_ISCSI_860 0x035c #define ICE_APP_PROT_ID_FIP 0x8914 #define ICE_APP_SEL_ETHTYPE 0x1 #define ICE_APP_SEL_TCPIP 0x2 -- cgit v1.2.3 From e95fc8573e07c5e4825df4650fd8b8c93fad27a7 Mon Sep 17 00:00:00 2001 From: Krzysztof Goreczny Date: Fri, 26 Feb 2021 13:19:26 -0800 Subject: ice: prevent ice_open and ice_stop during reset There is a possibility of race between ice_open or ice_stop calls performed by OS and reset handling routine both trying to modify VSI resources. Observed scenarios: - reset handler deallocates memory in ice_vsi_free_arrays and ice_open tries to access it in ice_vsi_cfg_txq leading to driver crash - reset handler deallocates memory in ice_vsi_free_arrays and ice_close tries to access it in ice_down leading to driver crash - reset handler clears port scheduler topology and sets port state to ICE_SCHED_PORT_STATE_INIT leading to ice_ena_vsi_txq fail in ice_open To prevent this additional checks in ice_open and ice_stop are introduced to make sure that OS is not allowed to alter VSI config while reset is in progress. Fixes: cdedef59deb0 ("ice: Configure VSIs for Tx/Rx") Signed-off-by: Krzysztof Goreczny Tested-by: Tony Brelinski Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice.h | 1 + drivers/net/ethernet/intel/ice/ice_lib.c | 4 ++-- drivers/net/ethernet/intel/ice/ice_main.c | 28 ++++++++++++++++++++++++++++ 3 files changed, 31 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ice/ice.h b/drivers/net/ethernet/intel/ice/ice.h index 357706444dd5..1d4518638215 100644 --- a/drivers/net/ethernet/intel/ice/ice.h +++ b/drivers/net/ethernet/intel/ice/ice.h @@ -642,6 +642,7 @@ int ice_fdir_create_dflt_rules(struct ice_pf *pf); int ice_aq_wait_for_event(struct ice_pf *pf, u16 opcode, unsigned long timeout, struct ice_rq_event_info *event); int ice_open(struct net_device *netdev); +int ice_open_internal(struct net_device *netdev); int ice_stop(struct net_device *netdev); void ice_service_task_schedule(struct ice_pf *pf); diff --git a/drivers/net/ethernet/intel/ice/ice_lib.c b/drivers/net/ethernet/intel/ice/ice_lib.c index 8d4e2ad4328d..7ac2beaed95c 100644 --- a/drivers/net/ethernet/intel/ice/ice_lib.c +++ b/drivers/net/ethernet/intel/ice/ice_lib.c @@ -2620,7 +2620,7 @@ int ice_ena_vsi(struct ice_vsi *vsi, bool locked) if (!locked) rtnl_lock(); - err = ice_open(vsi->netdev); + err = ice_open_internal(vsi->netdev); if (!locked) rtnl_unlock(); @@ -2649,7 +2649,7 @@ void ice_dis_vsi(struct ice_vsi *vsi, bool locked) if (!locked) rtnl_lock(); - ice_stop(vsi->netdev); + ice_vsi_close(vsi); if (!locked) rtnl_unlock(); diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c index 53e053c997eb..255a07c1e33a 100644 --- a/drivers/net/ethernet/intel/ice/ice_main.c +++ b/drivers/net/ethernet/intel/ice/ice_main.c @@ -6632,6 +6632,28 @@ static void ice_tx_timeout(struct net_device *netdev, unsigned int txqueue) * Returns 0 on success, negative value on failure */ int ice_open(struct net_device *netdev) +{ + struct ice_netdev_priv *np = netdev_priv(netdev); + struct ice_pf *pf = np->vsi->back; + + if (ice_is_reset_in_progress(pf->state)) { + netdev_err(netdev, "can't open net device while reset is in progress"); + return -EBUSY; + } + + return ice_open_internal(netdev); +} + +/** + * ice_open_internal - Called when a network interface becomes active + * @netdev: network interface device structure + * + * Internal ice_open implementation. Should not be used directly except for ice_open and reset + * handling routine + * + * Returns 0 on success, negative value on failure + */ +int ice_open_internal(struct net_device *netdev) { struct ice_netdev_priv *np = netdev_priv(netdev); struct ice_vsi *vsi = np->vsi; @@ -6712,6 +6734,12 @@ int ice_stop(struct net_device *netdev) { struct ice_netdev_priv *np = netdev_priv(netdev); struct ice_vsi *vsi = np->vsi; + struct ice_pf *pf = vsi->back; + + if (ice_is_reset_in_progress(pf->state)) { + netdev_err(netdev, "can't stop net device while reset is in progress"); + return -EBUSY; + } ice_vsi_close(vsi); -- cgit v1.2.3 From 59df14f9cc2326bd6432d60eca0df8201d9d3d4b Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Fri, 26 Feb 2021 13:19:27 -0800 Subject: ice: fix memory allocation call Fix the order of number of array members and member size parameters in a *calloc() call. Fixes: b3c3890489f6 ("ice: avoid unnecessary single-member variable-length structs") Signed-off-by: Bruce Allan Tested-by: Tony Brelinski Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice_common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ice/ice_common.c b/drivers/net/ethernet/intel/ice/ice_common.c index 3d9475e222cd..a20edf1538a0 100644 --- a/drivers/net/ethernet/intel/ice/ice_common.c +++ b/drivers/net/ethernet/intel/ice/ice_common.c @@ -717,8 +717,8 @@ static enum ice_status ice_cfg_fw_log(struct ice_hw *hw, bool enable) if (!data) { data = devm_kcalloc(ice_hw_to_dev(hw), - sizeof(*data), ICE_AQC_FW_LOG_ID_MAX, + sizeof(*data), GFP_KERNEL); if (!data) return ICE_ERR_NO_MEMORY; -- cgit v1.2.3 From 1a1c130ab7575498eed5bcf7220037ae09cd1f8a Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 23 Mar 2021 20:26:52 +0100 Subject: ACPI: tables: x86: Reserve memory occupied by ACPI tables The following problem has been reported by George Kennedy: Since commit 7fef431be9c9 ("mm/page_alloc: place pages to tail in __free_pages_core()") the following use after free occurs intermittently when ACPI tables are accessed. BUG: KASAN: use-after-free in ibft_init+0x134/0xc49 Read of size 4 at addr ffff8880be453004 by task swapper/0/1 CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc1-7a7fd0d #1 Call Trace: dump_stack+0xf6/0x158 print_address_description.constprop.9+0x41/0x60 kasan_report.cold.14+0x7b/0xd4 __asan_report_load_n_noabort+0xf/0x20 ibft_init+0x134/0xc49 do_one_initcall+0xc4/0x3e0 kernel_init_freeable+0x5af/0x66b kernel_init+0x16/0x1d0 ret_from_fork+0x22/0x30 ACPI tables mapped via kmap() do not have their mapped pages reserved and the pages can be "stolen" by the buddy allocator. Apparently, on the affected system, the ACPI table in question is not located in "reserved" memory, like ACPI NVS or ACPI Data, that will not be used by the buddy allocator, so the memory occupied by that table has to be explicitly reserved to prevent the buddy allocator from using it. In order to address this problem, rearrange the initialization of the ACPI tables on x86 to locate the initial tables earlier and reserve the memory occupied by them. The other architectures using ACPI should not be affected by this change. Link: https://lore.kernel.org/linux-acpi/1614802160-29362-1-git-send-email-george.kennedy@oracle.com/ Reported-by: George Kennedy Tested-by: George Kennedy Signed-off-by: Rafael J. Wysocki Reviewed-by: Mike Rapoport Cc: 5.10+ # 5.10+ --- drivers/acpi/tables.c | 42 +++++++++++++++++++++++++++++++++++++++--- 1 file changed, 39 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c index e48690a006a4..9d581045acff 100644 --- a/drivers/acpi/tables.c +++ b/drivers/acpi/tables.c @@ -780,7 +780,7 @@ acpi_status acpi_os_table_override(struct acpi_table_header *existing_table, } /* - * acpi_table_init() + * acpi_locate_initial_tables() * * find RSDP, find and checksum SDT/XSDT. * checksum all tables, print SDT/XSDT @@ -788,7 +788,7 @@ acpi_status acpi_os_table_override(struct acpi_table_header *existing_table, * result: sdt_entry[] is initialized */ -int __init acpi_table_init(void) +int __init acpi_locate_initial_tables(void) { acpi_status status; @@ -803,9 +803,45 @@ int __init acpi_table_init(void) status = acpi_initialize_tables(initial_tables, ACPI_MAX_TABLES, 0); if (ACPI_FAILURE(status)) return -EINVAL; - acpi_table_initrd_scan(); + return 0; +} + +void __init acpi_reserve_initial_tables(void) +{ + int i; + + for (i = 0; i < ACPI_MAX_TABLES; i++) { + struct acpi_table_desc *table_desc = &initial_tables[i]; + u64 start = table_desc->address; + u64 size = table_desc->length; + + if (!start || !size) + break; + + pr_info("Reserving %4s table memory at [mem 0x%llx-0x%llx]\n", + table_desc->signature.ascii, start, start + size - 1); + + memblock_reserve(start, size); + } +} + +void __init acpi_table_init_complete(void) +{ + acpi_table_initrd_scan(); check_multiple_madt(); +} + +int __init acpi_table_init(void) +{ + int ret; + + ret = acpi_locate_initial_tables(); + if (ret) + return ret; + + acpi_table_init_complete(); + return 0; } -- cgit v1.2.3 From c0c33442f7203704aef345647e14c2fb86071001 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Fri, 26 Mar 2021 12:56:18 +0200 Subject: PM: runtime: Fix ordering in pm_runtime_get_suppliers() rpm_active indicates how many times the supplier usage_count has been incremented. Consequently it must be updated after pm_runtime_get_sync() of the supplier, not before. Fixes: 4c06c4e6cf63 ("driver core: Fix possible supplier PM-usage counter imbalance") Signed-off-by: Adrian Hunter Cc: 5.1+ # 5.1+ Signed-off-by: Rafael J. Wysocki --- drivers/base/power/runtime.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index d54e540067bf..4fde37713c58 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -1690,8 +1690,8 @@ void pm_runtime_get_suppliers(struct device *dev) device_links_read_lock_held()) if (link->flags & DL_FLAG_PM_RUNTIME) { link->supplier_preactivated = true; - refcount_inc(&link->rpm_active); pm_runtime_get_sync(link->supplier); + refcount_inc(&link->rpm_active); } device_links_read_unlock(idx); -- cgit v1.2.3 From 9dfacc54a8661bc8be6e08cffee59596ec59f263 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Fri, 26 Mar 2021 12:56:19 +0200 Subject: PM: runtime: Fix race getting/putting suppliers at probe pm_runtime_put_suppliers() must not decrement rpm_active unless the consumer is suspended. That is because, otherwise, it could suspend suppliers for an active consumer. That can happen as follows: static int driver_probe_device(struct device_driver *drv, struct device *dev) { int ret = 0; if (!device_is_registered(dev)) return -ENODEV; dev->can_match = true; pr_debug("bus: '%s': %s: matched device %s with driver %s\n", drv->bus->name, __func__, dev_name(dev), drv->name); pm_runtime_get_suppliers(dev); if (dev->parent) pm_runtime_get_sync(dev->parent); At this point, dev can runtime suspend so rpm_put_suppliers() can run, rpm_active becomes 1 (the lowest value). pm_runtime_barrier(dev); if (initcall_debug) ret = really_probe_debug(dev, drv); else ret = really_probe(dev, drv); Probe callback can have runtime resumed dev, and then runtime put so dev is awaiting autosuspend, but rpm_active is 2. pm_request_idle(dev); if (dev->parent) pm_runtime_put(dev->parent); pm_runtime_put_suppliers(dev); Now pm_runtime_put_suppliers() will put the supplier i.e. rpm_active 2 -> 1, but consumer can still be active. return ret; } Fix by checking the runtime status. For any status other than RPM_SUSPENDED, rpm_active can be considered to be "owned" by rpm_[get/put]_suppliers() and pm_runtime_put_suppliers() need do nothing. Reported-by: Asutosh Das Fixes: 4c06c4e6cf63 ("driver core: Fix possible supplier PM-usage counter imbalance") Signed-off-by: Adrian Hunter Cc: 5.1+ # 5.1+ Signed-off-by: Rafael J. Wysocki --- drivers/base/power/runtime.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index 4fde37713c58..fe1dad68aee4 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -1704,6 +1704,8 @@ void pm_runtime_get_suppliers(struct device *dev) void pm_runtime_put_suppliers(struct device *dev) { struct device_link *link; + unsigned long flags; + bool put; int idx; idx = device_links_read_lock(); @@ -1712,7 +1714,11 @@ void pm_runtime_put_suppliers(struct device *dev) device_links_read_lock_held()) if (link->supplier_preactivated) { link->supplier_preactivated = false; - if (refcount_dec_not_one(&link->rpm_active)) + spin_lock_irqsave(&dev->power.lock, flags); + put = pm_runtime_status_suspended(dev) && + refcount_dec_not_one(&link->rpm_active); + spin_unlock_irqrestore(&dev->power.lock, flags); + if (put) pm_runtime_put(link->supplier); } -- cgit v1.2.3 From 741b7b743bbcb5a3848e4e55982064214f900d2f Mon Sep 17 00:00:00 2001 From: Dave Ertman Date: Fri, 26 Feb 2021 13:19:28 -0800 Subject: ice: remove DCBNL_DEVRESET bit from PF state The original purpose of the ICE_DCBNL_DEVRESET was to protect the driver during DCBNL device resets. But, the flow for DCBNL device resets now consists of only calls up the stack such as dev_close() and dev_open() that will result in NDO calls to the driver. These will be handled with state changes from the stack. Also, there is a problem of the dev_close and dev_open being blocked by checks for reset in progress also using the ICE_DCBNL_DEVRESET bit. Since the ICE_DCBNL_DEVRESET bit is not necessary for protecting the driver from DCBNL device resets and it is actually blocking changes coming from the DCBNL interface, remove the bit from the PF state and don't block driver function based on DCBNL reset in progress. Fixes: b94b013eb626 ("ice: Implement DCBNL support") Signed-off-by: Dave Ertman Tested-by: Tony Brelinski Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice.h | 1 - drivers/net/ethernet/intel/ice/ice_dcb_nl.c | 2 -- drivers/net/ethernet/intel/ice/ice_lib.c | 1 - 3 files changed, 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ice/ice.h b/drivers/net/ethernet/intel/ice/ice.h index 1d4518638215..7934f0d17277 100644 --- a/drivers/net/ethernet/intel/ice/ice.h +++ b/drivers/net/ethernet/intel/ice/ice.h @@ -196,7 +196,6 @@ enum ice_state { __ICE_NEEDS_RESTART, __ICE_PREPARED_FOR_RESET, /* set by driver when prepared */ __ICE_RESET_OICR_RECV, /* set by driver after rcv reset OICR */ - __ICE_DCBNL_DEVRESET, /* set by dcbnl devreset */ __ICE_PFR_REQ, /* set by driver and peers */ __ICE_CORER_REQ, /* set by driver and peers */ __ICE_GLOBR_REQ, /* set by driver and peers */ diff --git a/drivers/net/ethernet/intel/ice/ice_dcb_nl.c b/drivers/net/ethernet/intel/ice/ice_dcb_nl.c index 468a63f7eff9..4180f1f35fb8 100644 --- a/drivers/net/ethernet/intel/ice/ice_dcb_nl.c +++ b/drivers/net/ethernet/intel/ice/ice_dcb_nl.c @@ -18,12 +18,10 @@ static void ice_dcbnl_devreset(struct net_device *netdev) while (ice_is_reset_in_progress(pf->state)) usleep_range(1000, 2000); - set_bit(__ICE_DCBNL_DEVRESET, pf->state); dev_close(netdev); netdev_state_change(netdev); dev_open(netdev, NULL); netdev_state_change(netdev); - clear_bit(__ICE_DCBNL_DEVRESET, pf->state); } /** diff --git a/drivers/net/ethernet/intel/ice/ice_lib.c b/drivers/net/ethernet/intel/ice/ice_lib.c index 7ac2beaed95c..d13c7fc8fb0a 100644 --- a/drivers/net/ethernet/intel/ice/ice_lib.c +++ b/drivers/net/ethernet/intel/ice/ice_lib.c @@ -3078,7 +3078,6 @@ err_vsi: bool ice_is_reset_in_progress(unsigned long *state) { return test_bit(__ICE_RESET_OICR_RECV, state) || - test_bit(__ICE_DCBNL_DEVRESET, state) || test_bit(__ICE_PFR_REQ, state) || test_bit(__ICE_CORER_REQ, state) || test_bit(__ICE_GLOBR_REQ, state); -- cgit v1.2.3 From 7a91d3f02b04b2fb18c2dfa8b6c4e5a40a2753f5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jacek=20Bu=C5=82atek?= Date: Fri, 26 Feb 2021 13:19:29 -0800 Subject: ice: Fix for dereference of NULL pointer MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add handling of allocation fault for ice_vsi_list_map_info. Also *fi should not be NULL pointer, it is a reference to raw data field, so remove this variable and use the reference directly. Fixes: 9daf8208dd4d ("ice: Add support for switch filter programming") Signed-off-by: Jacek Bułatek Co-developed-by: Haiyue Wang Signed-off-by: Haiyue Wang Tested-by: Tony Brelinski Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice_switch.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ice/ice_switch.c b/drivers/net/ethernet/intel/ice/ice_switch.c index 67c965a3f5d2..387d3f6cd71e 100644 --- a/drivers/net/ethernet/intel/ice/ice_switch.c +++ b/drivers/net/ethernet/intel/ice/ice_switch.c @@ -1238,6 +1238,9 @@ ice_add_update_vsi_list(struct ice_hw *hw, ice_create_vsi_list_map(hw, &vsi_handle_arr[0], 2, vsi_list_id); + if (!m_entry->vsi_list_info) + return ICE_ERR_NO_MEMORY; + /* If this entry was large action then the large action needs * to be updated to point to FWD to VSI list */ @@ -2220,6 +2223,7 @@ ice_vsi_uses_fltr(struct ice_fltr_mgmt_list_entry *fm_entry, u16 vsi_handle) return ((fm_entry->fltr_info.fltr_act == ICE_FWD_TO_VSI && fm_entry->fltr_info.vsi_handle == vsi_handle) || (fm_entry->fltr_info.fltr_act == ICE_FWD_TO_VSI_LIST && + fm_entry->vsi_list_info && (test_bit(vsi_handle, fm_entry->vsi_list_info->vsi_map)))); } @@ -2292,14 +2296,12 @@ ice_add_to_vsi_fltr_list(struct ice_hw *hw, u16 vsi_handle, return ICE_ERR_PARAM; list_for_each_entry(fm_entry, lkup_list_head, list_entry) { - struct ice_fltr_info *fi; - - fi = &fm_entry->fltr_info; - if (!fi || !ice_vsi_uses_fltr(fm_entry, vsi_handle)) + if (!ice_vsi_uses_fltr(fm_entry, vsi_handle)) continue; status = ice_add_entry_to_vsi_fltr_list(hw, vsi_handle, - vsi_list_head, fi); + vsi_list_head, + &fm_entry->fltr_info); if (status) return status; } -- cgit v1.2.3 From 3176551979b92b02756979c0f1e2d03d1fc82b1e Mon Sep 17 00:00:00 2001 From: Anirudh Venkataramanan Date: Fri, 26 Feb 2021 13:19:30 -0800 Subject: ice: Use port number instead of PF ID for WoL As per the spec, the WoL control word read from the NVM should be interpreted as port numbers, and not PF numbers. So when checking if WoL supported, use the port number instead of the PF ID. Also, ice_is_wol_supported doesn't really need a pointer to the pf struct, but just needs a pointer to the hw instance. Fixes: 769c500dcc1e ("ice: Add advanced power mgmt for WoL") Signed-off-by: Anirudh Venkataramanan Tested-by: Tony Brelinski Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice.h | 2 +- drivers/net/ethernet/intel/ice/ice_ethtool.c | 4 ++-- drivers/net/ethernet/intel/ice/ice_main.c | 9 ++++----- 3 files changed, 7 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ice/ice.h b/drivers/net/ethernet/intel/ice/ice.h index 7934f0d17277..17101c45cbcd 100644 --- a/drivers/net/ethernet/intel/ice/ice.h +++ b/drivers/net/ethernet/intel/ice/ice.h @@ -623,7 +623,7 @@ int ice_schedule_reset(struct ice_pf *pf, enum ice_reset_req reset); void ice_print_link_msg(struct ice_vsi *vsi, bool isup); const char *ice_stat_str(enum ice_status stat_err); const char *ice_aq_str(enum ice_aq_err aq_err); -bool ice_is_wol_supported(struct ice_pf *pf); +bool ice_is_wol_supported(struct ice_hw *hw); int ice_fdir_write_fltr(struct ice_pf *pf, struct ice_fdir_fltr *input, bool add, bool is_tun); diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool.c b/drivers/net/ethernet/intel/ice/ice_ethtool.c index 2dcfa685b763..32ba71a16165 100644 --- a/drivers/net/ethernet/intel/ice/ice_ethtool.c +++ b/drivers/net/ethernet/intel/ice/ice_ethtool.c @@ -3472,7 +3472,7 @@ static void ice_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) netdev_warn(netdev, "Wake on LAN is not supported on this interface!\n"); /* Get WoL settings based on the HW capability */ - if (ice_is_wol_supported(pf)) { + if (ice_is_wol_supported(&pf->hw)) { wol->supported = WAKE_MAGIC; wol->wolopts = pf->wol_ena ? WAKE_MAGIC : 0; } else { @@ -3492,7 +3492,7 @@ static int ice_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) struct ice_vsi *vsi = np->vsi; struct ice_pf *pf = vsi->back; - if (vsi->type != ICE_VSI_PF || !ice_is_wol_supported(pf)) + if (vsi->type != ICE_VSI_PF || !ice_is_wol_supported(&pf->hw)) return -EOPNOTSUPP; /* only magic packet is supported */ diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c index 255a07c1e33a..9f1adff85be7 100644 --- a/drivers/net/ethernet/intel/ice/ice_main.c +++ b/drivers/net/ethernet/intel/ice/ice_main.c @@ -3537,15 +3537,14 @@ static int ice_init_interrupt_scheme(struct ice_pf *pf) } /** - * ice_is_wol_supported - get NVM state of WoL - * @pf: board private structure + * ice_is_wol_supported - check if WoL is supported + * @hw: pointer to hardware info * * Check if WoL is supported based on the HW configuration. * Returns true if NVM supports and enables WoL for this port, false otherwise */ -bool ice_is_wol_supported(struct ice_pf *pf) +bool ice_is_wol_supported(struct ice_hw *hw) { - struct ice_hw *hw = &pf->hw; u16 wol_ctrl; /* A bit set to 1 in the NVM Software Reserved Word 2 (WoL control @@ -3554,7 +3553,7 @@ bool ice_is_wol_supported(struct ice_pf *pf) if (ice_read_sr_word(hw, ICE_SR_NVM_WOL_CFG, &wol_ctrl)) return false; - return !(BIT(hw->pf_id) & wol_ctrl); + return !(BIT(hw->port_info->lport) & wol_ctrl); } /** -- cgit v1.2.3 From b7eeb52721fe417730fc5adc5cbeeb5fe349ab26 Mon Sep 17 00:00:00 2001 From: Robert Malz Date: Fri, 26 Feb 2021 13:19:32 -0800 Subject: ice: Cleanup fltr list in case of allocation issues When ice_remove_vsi_lkup_fltr is called, by calling ice_add_to_vsi_fltr_list local copy of vsi filter list is created. If any issues during creation of vsi filter list occurs it up for the caller to free already allocated memory. This patch ensures proper memory deallocation in these cases. Fixes: 80d144c9ac82 ("ice: Refactor switch rule management structures and functions") Signed-off-by: Robert Malz Tested-by: Tony Brelinski Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice_switch.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ice/ice_switch.c b/drivers/net/ethernet/intel/ice/ice_switch.c index 387d3f6cd71e..834cbd3f7b31 100644 --- a/drivers/net/ethernet/intel/ice/ice_switch.c +++ b/drivers/net/ethernet/intel/ice/ice_switch.c @@ -2624,7 +2624,7 @@ ice_remove_vsi_lkup_fltr(struct ice_hw *hw, u16 vsi_handle, &remove_list_head); mutex_unlock(rule_lock); if (status) - return; + goto free_fltr_list; switch (lkup) { case ICE_SW_LKUP_MAC: @@ -2647,6 +2647,7 @@ ice_remove_vsi_lkup_fltr(struct ice_hw *hw, u16 vsi_handle, break; } +free_fltr_list: list_for_each_entry_safe(fm_entry, tmp, &remove_list_head, list_entry) { list_del(&fm_entry->list_entry); devm_kfree(ice_hw_to_dev(hw), fm_entry); -- cgit v1.2.3 From acc7baafeb0b52a5b91be64c4776f827a163dda1 Mon Sep 17 00:00:00 2001 From: Evan Quan Date: Tue, 23 Mar 2021 16:30:38 +0800 Subject: drm/amd/pm: no need to force MCLK to highest when no display connected Correct the check for vblank short. Signed-off-by: Evan Quan Reviewed-by: Alex Deucher Tested-by: Alex Deucher Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_hwmgr.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_hwmgr.c index 22b6a8e8bd21..d0ec83881fc5 100644 --- a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_hwmgr.c +++ b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_hwmgr.c @@ -3330,7 +3330,8 @@ static int smu7_apply_state_adjust_rules(struct pp_hwmgr *hwmgr, disable_mclk_switching_for_display = ((1 < hwmgr->display_config->num_display) && !hwmgr->display_config->multi_monitor_in_sync) || - smu7_vblank_too_short(hwmgr, hwmgr->display_config->min_vblank_time); + (hwmgr->display_config->num_display && + smu7_vblank_too_short(hwmgr, hwmgr->display_config->min_vblank_time)); disable_mclk_switching = disable_mclk_switching_for_frame_lock || disable_mclk_switching_for_display; -- cgit v1.2.3 From 5e61b84f9d3ddfba73091f9fbc940caae1c9eb22 Mon Sep 17 00:00:00 2001 From: Nirmoy Das Date: Fri, 26 Mar 2021 16:08:10 +0100 Subject: drm/amdgpu: fix offset calculation in amdgpu_vm_bo_clear_mappings() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Offset calculation wasn't correct as start addresses are in pfn not in bytes. CC: stable@vger.kernel.org Signed-off-by: Nirmoy Das Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c index ad91c0c3c423..10de2cf344d5 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c @@ -2409,7 +2409,7 @@ int amdgpu_vm_bo_clear_mappings(struct amdgpu_device *adev, after->start = eaddr + 1; after->last = tmp->last; after->offset = tmp->offset; - after->offset += after->start - tmp->start; + after->offset += (after->start - tmp->start) << PAGE_SHIFT; after->flags = tmp->flags; after->bo_va = tmp->bo_va; list_add(&after->list, &tmp->bo_va->invalids); -- cgit v1.2.3 From 2867b9746cef78745c594894aece6f8ef826e0b4 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Sun, 14 Mar 2021 12:07:09 +0100 Subject: clk: socfpga: fix iomem pointer cast on 64-bit MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Pointers should be cast with uintptr_t instead of integer. This fixes warning when compile testing on ARM64: drivers/clk/socfpga/clk-gate.c: In function ‘socfpga_clk_recalc_rate’: drivers/clk/socfpga/clk-gate.c:102:7: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] Fixes: b7cec13f082f ("clk: socfpga: Look for the GPIO_DB_CLK by its offset") Signed-off-by: Krzysztof Kozlowski Acked-by: Dinh Nguyen Link: https://lore.kernel.org/r/20210314110709.32599-1-krzysztof.kozlowski@canonical.com Signed-off-by: Stephen Boyd --- drivers/clk/socfpga/clk-gate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/clk/socfpga/clk-gate.c b/drivers/clk/socfpga/clk-gate.c index 43ecd507bf83..cf94a12459ea 100644 --- a/drivers/clk/socfpga/clk-gate.c +++ b/drivers/clk/socfpga/clk-gate.c @@ -99,7 +99,7 @@ static unsigned long socfpga_clk_recalc_rate(struct clk_hw *hwclk, val = readl(socfpgaclk->div_reg) >> socfpgaclk->shift; val &= GENMASK(socfpgaclk->width - 1, 0); /* Check for GPIO_DB_CLK by its offset */ - if ((int) socfpgaclk->div_reg & SOCFPGA_GPIO_DB_CLK_OFFSET) + if ((uintptr_t) socfpgaclk->div_reg & SOCFPGA_GPIO_DB_CLK_OFFSET) div = val + 1; else div = (1 << val); -- cgit v1.2.3 From 66167c310deb4ac1725f81004fb4b504676ad0bf Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Mon, 29 Mar 2021 11:29:23 +0300 Subject: mlxsw: spectrum: Fix ECN marking in tunnel decapsulation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Cited commit changed the behavior of the software data path with regards to the ECN marking of decapsulated packets. However, the commit did not change other callers of __INET_ECN_decapsulate(), namely mlxsw. The driver is using the function in order to ensure that the hardware and software data paths act the same with regards to the ECN marking of decapsulated packets. The discrepancy was uncovered by commit 5aa3c334a449 ("selftests: forwarding: vxlan_bridge_1d: Fix vxlan ecn decapsulate value") that aligned the selftest to the new behavior. Without this patch the selftest passes when used with veth pairs, but fails when used with mlxsw netdevs. Fix this by instructing the device to propagate the ECT(1) mark from the outer header to the inner header when the inner header is ECT(0), for both NVE and IP-in-IP tunnels. A helper is added in order not to duplicate the code between both tunnel types. Fixes: b723748750ec ("tunnel: Propagate ECT(1) when decapsulating as recommended by RFC6040") Signed-off-by: Ido Schimmel Reviewed-by: Petr Machata Acked-by: Toke Høiland-Jørgensen Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum.h | 15 +++++++++++++++ drivers/net/ethernet/mellanox/mlxsw/spectrum_ipip.c | 7 +++---- drivers/net/ethernet/mellanox/mlxsw/spectrum_nve.c | 7 +++---- 3 files changed, 21 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h index d9d9e1f488f9..ba28ac7e79bc 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h @@ -21,6 +21,7 @@ #include #include #include +#include #include "port.h" #include "core.h" @@ -347,6 +348,20 @@ struct mlxsw_sp_port_type_speed_ops { u32 (*ptys_proto_cap_masked_get)(u32 eth_proto_cap); }; +static inline u8 mlxsw_sp_tunnel_ecn_decap(u8 outer_ecn, u8 inner_ecn, + bool *trap_en) +{ + bool set_ce = false; + + *trap_en = !!__INET_ECN_decapsulate(outer_ecn, inner_ecn, &set_ce); + if (set_ce) + return INET_ECN_CE; + else if (outer_ecn == INET_ECN_ECT_1 && inner_ecn == INET_ECN_ECT_0) + return INET_ECN_ECT_1; + else + return inner_ecn; +} + static inline struct net_device * mlxsw_sp_bridge_vxlan_dev_find(struct net_device *br_dev) { diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_ipip.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_ipip.c index 6ccca39bae84..64a8f838eb53 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_ipip.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_ipip.c @@ -335,12 +335,11 @@ static int mlxsw_sp_ipip_ecn_decap_init_one(struct mlxsw_sp *mlxsw_sp, u8 inner_ecn, u8 outer_ecn) { char tidem_pl[MLXSW_REG_TIDEM_LEN]; - bool trap_en, set_ce = false; u8 new_inner_ecn; + bool trap_en; - trap_en = __INET_ECN_decapsulate(outer_ecn, inner_ecn, &set_ce); - new_inner_ecn = set_ce ? INET_ECN_CE : inner_ecn; - + new_inner_ecn = mlxsw_sp_tunnel_ecn_decap(outer_ecn, inner_ecn, + &trap_en); mlxsw_reg_tidem_pack(tidem_pl, outer_ecn, inner_ecn, new_inner_ecn, trap_en, trap_en ? MLXSW_TRAP_ID_DECAP_ECN0 : 0); return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(tidem), tidem_pl); diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_nve.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_nve.c index e5ec595593f4..9eba8fa684ae 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_nve.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_nve.c @@ -909,12 +909,11 @@ static int __mlxsw_sp_nve_ecn_decap_init(struct mlxsw_sp *mlxsw_sp, u8 inner_ecn, u8 outer_ecn) { char tndem_pl[MLXSW_REG_TNDEM_LEN]; - bool trap_en, set_ce = false; u8 new_inner_ecn; + bool trap_en; - trap_en = !!__INET_ECN_decapsulate(outer_ecn, inner_ecn, &set_ce); - new_inner_ecn = set_ce ? INET_ECN_CE : inner_ecn; - + new_inner_ecn = mlxsw_sp_tunnel_ecn_decap(outer_ecn, inner_ecn, + &trap_en); mlxsw_reg_tndem_pack(tndem_pl, outer_ecn, inner_ecn, new_inner_ecn, trap_en, trap_en ? MLXSW_TRAP_ID_DECAP_ECN0 : 0); return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(tndem), tndem_pl); -- cgit v1.2.3 From 63415767a2446136372e777cde5bb351f21ec21d Mon Sep 17 00:00:00 2001 From: Lv Yunlong Date: Mon, 29 Mar 2021 05:36:48 -0700 Subject: ethernet: myri10ge: Fix a use after free in myri10ge_sw_tso In myri10ge_sw_tso, the skb_list_walk_safe macro will set (curr) = (segs) and (next) = (curr)->next. If status!=0 is true, the memory pointed by curr and segs will be free by dev_kfree_skb_any(curr). But later, the segs is used by segs = segs->next and causes a uaf. As (next) = (curr)->next, my patch replaces seg->next to next. Fixes: 536577f36ff7a ("net: myri10ge: use skb_list_walk_safe helper for gso segments") Signed-off-by: Lv Yunlong Signed-off-by: David S. Miller --- drivers/net/ethernet/myricom/myri10ge/myri10ge.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/myricom/myri10ge/myri10ge.c b/drivers/net/ethernet/myricom/myri10ge/myri10ge.c index 1634ca6d4a8f..c84c8bf2bc20 100644 --- a/drivers/net/ethernet/myricom/myri10ge/myri10ge.c +++ b/drivers/net/ethernet/myricom/myri10ge/myri10ge.c @@ -2897,7 +2897,7 @@ static netdev_tx_t myri10ge_sw_tso(struct sk_buff *skb, dev_kfree_skb_any(curr); if (segs != NULL) { curr = segs; - segs = segs->next; + segs = next; curr->next = NULL; dev_kfree_skb_any(segs); } -- cgit v1.2.3 From bff5b62585123823842833ab20b1c0a7fa437f8c Mon Sep 17 00:00:00 2001 From: Claudiu Manoil Date: Mon, 29 Mar 2021 17:08:47 +0300 Subject: gianfar: Handle error code at MAC address change Handle return error code of eth_mac_addr(); Fixes: 3d23a05c75c7 ("gianfar: Enable changing mac addr when if up") Signed-off-by: Claudiu Manoil Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/gianfar.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index 1cf8ef717453..3ec4d9fddd52 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -363,7 +363,11 @@ static void gfar_set_mac_for_addr(struct net_device *dev, int num, static int gfar_set_mac_addr(struct net_device *dev, void *p) { - eth_mac_addr(dev, p); + int ret; + + ret = eth_mac_addr(dev, p); + if (ret) + return ret; gfar_set_mac_for_addr(dev, 0, dev->dev_addr); -- cgit v1.2.3 From e0146a108ce4d2c22b9510fd12268e3ee72a0161 Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Mon, 29 Mar 2021 16:00:16 -0300 Subject: vfio/nvlink: Add missing SPAPR_TCE_IOMMU depends Compiling the nvlink stuff relies on the SPAPR_TCE_IOMMU otherwise there are compile errors: drivers/vfio/pci/vfio_pci_nvlink2.c:101:10: error: implicit declaration of function 'mm_iommu_put' [-Werror,-Wimplicit-function-declaration] ret = mm_iommu_put(data->mm, data->mem); As PPC only defines these functions when the config is set. Previously this wasn't a problem by chance as SPAPR_TCE_IOMMU was the only IOMMU that could have satisfied IOMMU_API on POWERNV. Fixes: 179209fa1270 ("vfio: IOMMU_API should be selected") Reported-by: kernel test robot Signed-off-by: Jason Gunthorpe Message-Id: <0-v1-83dba9768fc3+419-vfio_nvlink2_kconfig_jgg@nvidia.com> Signed-off-by: Alex Williamson --- drivers/vfio/pci/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/vfio/pci/Kconfig b/drivers/vfio/pci/Kconfig index ac3c1dd3edef..4abddbebd4b2 100644 --- a/drivers/vfio/pci/Kconfig +++ b/drivers/vfio/pci/Kconfig @@ -42,6 +42,6 @@ config VFIO_PCI_IGD config VFIO_PCI_NVLINK2 def_bool y - depends on VFIO_PCI && PPC_POWERNV + depends on VFIO_PCI && PPC_POWERNV && SPAPR_TCE_IOMMU help VFIO PCI support for P9 Witherspoon machine with NVIDIA V100 GPUs -- cgit v1.2.3 From e5c359f70e4b5e7b6c2bf4b0ca2d2686d543a37b Mon Sep 17 00:00:00 2001 From: Taniya Das Date: Sat, 27 Mar 2021 07:11:05 +0530 Subject: clk: qcom: camcc: Update the clock ops for the SC7180 Some of the RCGs could be always ON from the XO source and could be used as the clock on signal for the GDSC to be operational. In the cases where the GDSCs are parked at different source with the source clock disabled, it could lead to the GDSC to be stuck at ON/OFF during gdsc disable/enable. Thus park the RCGs at XO during clock disable and update the rcg_ops to use the shared_ops. Fixes: 15d09e830bbc ("clk: qcom: camcc: Add camera clock controller driver for SC7180") Signed-off-by: Taniya Das Link: https://lore.kernel.org/r/1616809265-11912-1-git-send-email-tdas@codeaurora.org Signed-off-by: Stephen Boyd --- drivers/clk/qcom/camcc-sc7180.c | 50 ++++++++++++++++++++--------------------- 1 file changed, 25 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/qcom/camcc-sc7180.c b/drivers/clk/qcom/camcc-sc7180.c index dbac5651ab85..9bcf2f8ed4de 100644 --- a/drivers/clk/qcom/camcc-sc7180.c +++ b/drivers/clk/qcom/camcc-sc7180.c @@ -304,7 +304,7 @@ static struct clk_rcg2 cam_cc_bps_clk_src = { .name = "cam_cc_bps_clk_src", .parent_data = cam_cc_parent_data_2, .num_parents = 5, - .ops = &clk_rcg2_ops, + .ops = &clk_rcg2_shared_ops, }, }; @@ -325,7 +325,7 @@ static struct clk_rcg2 cam_cc_cci_0_clk_src = { .name = "cam_cc_cci_0_clk_src", .parent_data = cam_cc_parent_data_5, .num_parents = 3, - .ops = &clk_rcg2_ops, + .ops = &clk_rcg2_shared_ops, }, }; @@ -339,7 +339,7 @@ static struct clk_rcg2 cam_cc_cci_1_clk_src = { .name = "cam_cc_cci_1_clk_src", .parent_data = cam_cc_parent_data_5, .num_parents = 3, - .ops = &clk_rcg2_ops, + .ops = &clk_rcg2_shared_ops, }, }; @@ -360,7 +360,7 @@ static struct clk_rcg2 cam_cc_cphy_rx_clk_src = { .name = "cam_cc_cphy_rx_clk_src", .parent_data = cam_cc_parent_data_3, .num_parents = 6, - .ops = &clk_rcg2_ops, + .ops = &clk_rcg2_shared_ops, }, }; @@ -379,7 +379,7 @@ static struct clk_rcg2 cam_cc_csi0phytimer_clk_src = { .name = "cam_cc_csi0phytimer_clk_src", .parent_data = cam_cc_parent_data_0, .num_parents = 4, - .ops = &clk_rcg2_ops, + .ops = &clk_rcg2_shared_ops, }, }; @@ -393,7 +393,7 @@ static struct clk_rcg2 cam_cc_csi1phytimer_clk_src = { .name = "cam_cc_csi1phytimer_clk_src", .parent_data = cam_cc_parent_data_0, .num_parents = 4, - .ops = &clk_rcg2_ops, + .ops = &clk_rcg2_shared_ops, }, }; @@ -407,7 +407,7 @@ static struct clk_rcg2 cam_cc_csi2phytimer_clk_src = { .name = "cam_cc_csi2phytimer_clk_src", .parent_data = cam_cc_parent_data_0, .num_parents = 4, - .ops = &clk_rcg2_ops, + .ops = &clk_rcg2_shared_ops, }, }; @@ -421,7 +421,7 @@ static struct clk_rcg2 cam_cc_csi3phytimer_clk_src = { .name = "cam_cc_csi3phytimer_clk_src", .parent_data = cam_cc_parent_data_0, .num_parents = 4, - .ops = &clk_rcg2_ops, + .ops = &clk_rcg2_shared_ops, }, }; @@ -443,7 +443,7 @@ static struct clk_rcg2 cam_cc_fast_ahb_clk_src = { .name = "cam_cc_fast_ahb_clk_src", .parent_data = cam_cc_parent_data_0, .num_parents = 4, - .ops = &clk_rcg2_ops, + .ops = &clk_rcg2_shared_ops, }, }; @@ -466,7 +466,7 @@ static struct clk_rcg2 cam_cc_icp_clk_src = { .name = "cam_cc_icp_clk_src", .parent_data = cam_cc_parent_data_2, .num_parents = 5, - .ops = &clk_rcg2_ops, + .ops = &clk_rcg2_shared_ops, }, }; @@ -488,7 +488,7 @@ static struct clk_rcg2 cam_cc_ife_0_clk_src = { .name = "cam_cc_ife_0_clk_src", .parent_data = cam_cc_parent_data_4, .num_parents = 4, - .ops = &clk_rcg2_ops, + .ops = &clk_rcg2_shared_ops, }, }; @@ -510,7 +510,7 @@ static struct clk_rcg2 cam_cc_ife_0_csid_clk_src = { .name = "cam_cc_ife_0_csid_clk_src", .parent_data = cam_cc_parent_data_3, .num_parents = 6, - .ops = &clk_rcg2_ops, + .ops = &clk_rcg2_shared_ops, }, }; @@ -524,7 +524,7 @@ static struct clk_rcg2 cam_cc_ife_1_clk_src = { .name = "cam_cc_ife_1_clk_src", .parent_data = cam_cc_parent_data_4, .num_parents = 4, - .ops = &clk_rcg2_ops, + .ops = &clk_rcg2_shared_ops, }, }; @@ -538,7 +538,7 @@ static struct clk_rcg2 cam_cc_ife_1_csid_clk_src = { .name = "cam_cc_ife_1_csid_clk_src", .parent_data = cam_cc_parent_data_3, .num_parents = 6, - .ops = &clk_rcg2_ops, + .ops = &clk_rcg2_shared_ops, }, }; @@ -553,7 +553,7 @@ static struct clk_rcg2 cam_cc_ife_lite_clk_src = { .parent_data = cam_cc_parent_data_4, .num_parents = 4, .flags = CLK_SET_RATE_PARENT, - .ops = &clk_rcg2_ops, + .ops = &clk_rcg2_shared_ops, }, }; @@ -567,7 +567,7 @@ static struct clk_rcg2 cam_cc_ife_lite_csid_clk_src = { .name = "cam_cc_ife_lite_csid_clk_src", .parent_data = cam_cc_parent_data_3, .num_parents = 6, - .ops = &clk_rcg2_ops, + .ops = &clk_rcg2_shared_ops, }, }; @@ -590,7 +590,7 @@ static struct clk_rcg2 cam_cc_ipe_0_clk_src = { .name = "cam_cc_ipe_0_clk_src", .parent_data = cam_cc_parent_data_2, .num_parents = 5, - .ops = &clk_rcg2_ops, + .ops = &clk_rcg2_shared_ops, }, }; @@ -613,7 +613,7 @@ static struct clk_rcg2 cam_cc_jpeg_clk_src = { .name = "cam_cc_jpeg_clk_src", .parent_data = cam_cc_parent_data_2, .num_parents = 5, - .ops = &clk_rcg2_ops, + .ops = &clk_rcg2_shared_ops, }, }; @@ -635,7 +635,7 @@ static struct clk_rcg2 cam_cc_lrme_clk_src = { .name = "cam_cc_lrme_clk_src", .parent_data = cam_cc_parent_data_6, .num_parents = 5, - .ops = &clk_rcg2_ops, + .ops = &clk_rcg2_shared_ops, }, }; @@ -656,7 +656,7 @@ static struct clk_rcg2 cam_cc_mclk0_clk_src = { .name = "cam_cc_mclk0_clk_src", .parent_data = cam_cc_parent_data_1, .num_parents = 3, - .ops = &clk_rcg2_ops, + .ops = &clk_rcg2_shared_ops, }, }; @@ -670,7 +670,7 @@ static struct clk_rcg2 cam_cc_mclk1_clk_src = { .name = "cam_cc_mclk1_clk_src", .parent_data = cam_cc_parent_data_1, .num_parents = 3, - .ops = &clk_rcg2_ops, + .ops = &clk_rcg2_shared_ops, }, }; @@ -684,7 +684,7 @@ static struct clk_rcg2 cam_cc_mclk2_clk_src = { .name = "cam_cc_mclk2_clk_src", .parent_data = cam_cc_parent_data_1, .num_parents = 3, - .ops = &clk_rcg2_ops, + .ops = &clk_rcg2_shared_ops, }, }; @@ -698,7 +698,7 @@ static struct clk_rcg2 cam_cc_mclk3_clk_src = { .name = "cam_cc_mclk3_clk_src", .parent_data = cam_cc_parent_data_1, .num_parents = 3, - .ops = &clk_rcg2_ops, + .ops = &clk_rcg2_shared_ops, }, }; @@ -712,7 +712,7 @@ static struct clk_rcg2 cam_cc_mclk4_clk_src = { .name = "cam_cc_mclk4_clk_src", .parent_data = cam_cc_parent_data_1, .num_parents = 3, - .ops = &clk_rcg2_ops, + .ops = &clk_rcg2_shared_ops, }, }; @@ -732,7 +732,7 @@ static struct clk_rcg2 cam_cc_slow_ahb_clk_src = { .parent_data = cam_cc_parent_data_0, .num_parents = 4, .flags = CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE, - .ops = &clk_rcg2_ops, + .ops = &clk_rcg2_shared_ops, }, }; -- cgit v1.2.3 From 1bfb3dea965ff9f6226fd1709338f227363b6061 Mon Sep 17 00:00:00 2001 From: Rahul Lakkireddy Date: Sat, 27 Mar 2021 23:49:08 +0530 Subject: cxgb4: avoid collecting SGE_QBASE regs during traffic Accessing SGE_QBASE_MAP[0-3] and SGE_QBASE_INDEX registers can lead to SGE missing doorbells under heavy traffic. So, only collect them when adapter is idle. Also update the regdump range to skip collecting these registers. Fixes: 80a95a80d358 ("cxgb4: collect SGE PF/VF queue map") Signed-off-by: Rahul Lakkireddy Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/cudbg_lib.c | 23 +++++++++++++++++++---- drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 3 ++- 2 files changed, 21 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/chelsio/cxgb4/cudbg_lib.c b/drivers/net/ethernet/chelsio/cxgb4/cudbg_lib.c index 6c85a10f465c..23a2ebdfd503 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cudbg_lib.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cudbg_lib.c @@ -1794,11 +1794,25 @@ int cudbg_collect_sge_indirect(struct cudbg_init *pdbg_init, struct cudbg_buffer temp_buff = { 0 }; struct sge_qbase_reg_field *sge_qbase; struct ireg_buf *ch_sge_dbg; + u8 padap_running = 0; int i, rc; + u32 size; - rc = cudbg_get_buff(pdbg_init, dbg_buff, - sizeof(*ch_sge_dbg) * 2 + sizeof(*sge_qbase), - &temp_buff); + /* Accessing SGE_QBASE_MAP[0-3] and SGE_QBASE_INDEX regs can + * lead to SGE missing doorbells under heavy traffic. So, only + * collect them when adapter is idle. + */ + for_each_port(padap, i) { + padap_running = netif_running(padap->port[i]); + if (padap_running) + break; + } + + size = sizeof(*ch_sge_dbg) * 2; + if (!padap_running) + size += sizeof(*sge_qbase); + + rc = cudbg_get_buff(pdbg_init, dbg_buff, size, &temp_buff); if (rc) return rc; @@ -1820,7 +1834,8 @@ int cudbg_collect_sge_indirect(struct cudbg_init *pdbg_init, ch_sge_dbg++; } - if (CHELSIO_CHIP_VERSION(padap->params.chip) > CHELSIO_T5) { + if (CHELSIO_CHIP_VERSION(padap->params.chip) > CHELSIO_T5 && + !padap_running) { sge_qbase = (struct sge_qbase_reg_field *)ch_sge_dbg; /* 1 addr reg SGE_QBASE_INDEX and 4 data reg * SGE_QBASE_MAP[0-3] diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c index 98829e482bfa..80882cfc370f 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -2090,7 +2090,8 @@ void t4_get_regs(struct adapter *adap, void *buf, size_t buf_size) 0x1190, 0x1194, 0x11a0, 0x11a4, 0x11b0, 0x11b4, - 0x11fc, 0x1274, + 0x11fc, 0x123c, + 0x1254, 0x1274, 0x1280, 0x133c, 0x1800, 0x18fc, 0x3000, 0x302c, -- cgit v1.2.3 From 6e5a03bcba44e080a6bf300194a68ce9bb1e5184 Mon Sep 17 00:00:00 2001 From: Lv Yunlong Date: Mon, 29 Mar 2021 04:50:02 -0700 Subject: ethernet/netronome/nfp: Fix a use after free in nfp_bpf_ctrl_msg_rx In nfp_bpf_ctrl_msg_rx, if nfp_ccm_get_type(skb) == NFP_CCM_TYPE_BPF_BPF_EVENT is true, the skb will be freed. But the skb is still used by nfp_ccm_rx(&bpf->ccm, skb). My patch adds a return when the skb was freed. Fixes: bcf0cafab44fd ("nfp: split out common control message handling code") Signed-off-by: Lv Yunlong Reviewed-by: Jakub Kicinski Signed-off-by: David S. Miller --- drivers/net/ethernet/netronome/nfp/bpf/cmsg.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/netronome/nfp/bpf/cmsg.c b/drivers/net/ethernet/netronome/nfp/bpf/cmsg.c index 0e2db6ea79e9..2ec62c8d86e1 100644 --- a/drivers/net/ethernet/netronome/nfp/bpf/cmsg.c +++ b/drivers/net/ethernet/netronome/nfp/bpf/cmsg.c @@ -454,6 +454,7 @@ void nfp_bpf_ctrl_msg_rx(struct nfp_app *app, struct sk_buff *skb) dev_consume_skb_any(skb); else dev_kfree_skb_any(skb); + return; } nfp_ccm_rx(&bpf->ccm, skb); -- cgit v1.2.3 From 9e67600ed6b8565da4b85698ec659b5879a6c1c6 Mon Sep 17 00:00:00 2001 From: Gulam Mohamed Date: Thu, 25 Mar 2021 09:32:48 +0000 Subject: scsi: iscsi: Fix race condition between login and sync thread A kernel panic was observed due to a timing issue between the sync thread and the initiator processing a login response from the target. The session reopen can be invoked both from the session sync thread when iscsid restarts and from iscsid through the error handler. Before the initiator receives the response to a login, another reopen request can be sent from the error handler/sync session. When the initial login response is subsequently processed, the connection has been closed and the socket has been released. To fix this a new connection state, ISCSI_CONN_BOUND, is added: - Set the connection state value to ISCSI_CONN_DOWN upon iscsi_if_ep_disconnect() and iscsi_if_stop_conn() - Set the connection state to the newly created value ISCSI_CONN_BOUND after bind connection (transport->bind_conn()) - In iscsi_set_param(), return -ENOTCONN if the connection state is not either ISCSI_CONN_BOUND or ISCSI_CONN_UP Link: https://lore.kernel.org/r/20210325093248.284678-1-gulam.mohamed@oracle.com Reviewed-by: Mike Christie Signed-off-by: Gulam Mohamed Signed-off-by: Martin K. Petersen index 91074fd97f64..f4bf62b007a0 100644 --- drivers/scsi/scsi_transport_iscsi.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index 969d24d580e2..bebfb355abdf 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -2471,6 +2471,7 @@ static void iscsi_if_stop_conn(struct iscsi_cls_conn *conn, int flag) */ mutex_lock(&conn_mutex); conn->transport->stop_conn(conn, flag); + conn->state = ISCSI_CONN_DOWN; mutex_unlock(&conn_mutex); } @@ -2894,6 +2895,13 @@ iscsi_set_param(struct iscsi_transport *transport, struct iscsi_uevent *ev) default: err = transport->set_param(conn, ev->u.set_param.param, data, ev->u.set_param.len); + if ((conn->state == ISCSI_CONN_BOUND) || + (conn->state == ISCSI_CONN_UP)) { + err = transport->set_param(conn, ev->u.set_param.param, + data, ev->u.set_param.len); + } else { + return -ENOTCONN; + } } return err; @@ -2953,6 +2961,7 @@ static int iscsi_if_ep_disconnect(struct iscsi_transport *transport, mutex_lock(&conn->ep_mutex); conn->ep = NULL; mutex_unlock(&conn->ep_mutex); + conn->state = ISCSI_CONN_DOWN; } transport->ep_disconnect(ep); @@ -3713,6 +3722,8 @@ iscsi_if_recv_msg(struct sk_buff *skb, struct nlmsghdr *nlh, uint32_t *group) ev->r.retcode = transport->bind_conn(session, conn, ev->u.b_conn.transport_eph, ev->u.b_conn.is_leading); + if (!ev->r.retcode) + conn->state = ISCSI_CONN_BOUND; mutex_unlock(&conn_mutex); if (ev->r.retcode || !transport->ep_connect) @@ -3944,7 +3955,8 @@ iscsi_conn_attr(local_ipaddr, ISCSI_PARAM_LOCAL_IPADDR); static const char *const connection_state_names[] = { [ISCSI_CONN_UP] = "up", [ISCSI_CONN_DOWN] = "down", - [ISCSI_CONN_FAILED] = "failed" + [ISCSI_CONN_FAILED] = "failed", + [ISCSI_CONN_BOUND] = "bound" }; static ssize_t show_conn_state(struct device *dev, -- cgit v1.2.3 From bec4d7c93afc07dd0454ae41c559513f858cfb83 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 29 Mar 2021 09:07:18 +0300 Subject: thunderbolt: Fix a leak in tb_retimer_add() After the device_register() succeeds, then the correct way to clean up is to call device_unregister(). The unregister calls both device_del() and device_put(). Since this code was only device_del() it results in a memory leak. Fixes: dacb12877d92 ("thunderbolt: Add support for on-board retimers") Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter Reviewed-by: Jason Gunthorpe Signed-off-by: Mika Westerberg --- drivers/thunderbolt/retimer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/thunderbolt/retimer.c b/drivers/thunderbolt/retimer.c index 620bcf586ee2..7a5d61604c8b 100644 --- a/drivers/thunderbolt/retimer.c +++ b/drivers/thunderbolt/retimer.c @@ -347,7 +347,7 @@ static int tb_retimer_add(struct tb_port *port, u8 index, u32 auth_status) ret = tb_retimer_nvm_add(rt); if (ret) { dev_err(&rt->dev, "failed to add NVM devices: %d\n", ret); - device_del(&rt->dev); + device_unregister(&rt->dev); return ret; } -- cgit v1.2.3 From 08fe7ae1857080f5075df5ac7fef2ecd4e289117 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 29 Mar 2021 09:08:01 +0300 Subject: thunderbolt: Fix off by one in tb_port_find_retimer() This array uses 1-based indexing so it corrupts memory one element beyond of the array. Fix it by making the array one element larger. Fixes: dacb12877d92 ("thunderbolt: Add support for on-board retimers") Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter Signed-off-by: Mika Westerberg --- drivers/thunderbolt/retimer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/thunderbolt/retimer.c b/drivers/thunderbolt/retimer.c index 7a5d61604c8b..c44fad2b9fbb 100644 --- a/drivers/thunderbolt/retimer.c +++ b/drivers/thunderbolt/retimer.c @@ -406,7 +406,7 @@ static struct tb_retimer *tb_port_find_retimer(struct tb_port *port, u8 index) */ int tb_retimer_scan(struct tb_port *port) { - u32 status[TB_MAX_RETIMER_INDEX] = {}; + u32 status[TB_MAX_RETIMER_INDEX + 1] = {}; int ret, i, last_idx = 0; if (!port->cap_usb4) -- cgit v1.2.3 From f8fb97c915954fc6de6513cdf277103b5c6df7b3 Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Tue, 2 Mar 2021 16:15:06 +0300 Subject: drm/tegra: dc: Don't set PLL clock to 0Hz RGB output doesn't allow to change parent clock rate of the display and PCLK rate is set to 0Hz in this case. The tegra_dc_commit_state() shall not set the display clock to 0Hz since this change propagates to the parent clock. The DISP clock is defined as a NODIV clock by the tegra-clk driver and all NODIV clocks use the CLK_SET_RATE_PARENT flag. This bug stayed unnoticed because by default PLLP is used as the parent clock for the display controller and PLLP silently skips the erroneous 0Hz rate changes because it always has active child clocks that don't permit rate changes. The PLLP isn't acceptable for some devices that we want to upstream (like Samsung Galaxy Tab and ASUS TF700T) due to a display panel clock rate requirements that can't be fulfilled by using PLLP and then the bug pops up in this case since parent clock is set to 0Hz, killing the display output. Don't touch DC clock if pclk=0 in order to fix the problem. Signed-off-by: Dmitry Osipenko Signed-off-by: Thierry Reding --- drivers/gpu/drm/tegra/dc.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/tegra/dc.c b/drivers/gpu/drm/tegra/dc.c index 0ae3a025efe9..24362533e14c 100644 --- a/drivers/gpu/drm/tegra/dc.c +++ b/drivers/gpu/drm/tegra/dc.c @@ -1688,6 +1688,11 @@ static void tegra_dc_commit_state(struct tegra_dc *dc, dev_err(dc->dev, "failed to set clock rate to %lu Hz\n", state->pclk); + + err = clk_set_rate(dc->clk, state->pclk); + if (err < 0) + dev_err(dc->dev, "failed to set clock %pC to %lu Hz: %d\n", + dc->clk, state->pclk, err); } DRM_DEBUG_KMS("rate: %lu, div: %u\n", clk_get_rate(dc->clk), @@ -1698,11 +1703,6 @@ static void tegra_dc_commit_state(struct tegra_dc *dc, value = SHIFT_CLK_DIVIDER(state->div) | PIXEL_CLK_DIVIDER_PCD1; tegra_dc_writel(dc, value, DC_DISP_DISP_CLOCK_CONTROL); } - - err = clk_set_rate(dc->clk, state->pclk); - if (err < 0) - dev_err(dc->dev, "failed to set clock %pC to %lu Hz: %d\n", - dc->clk, state->pclk, err); } static void tegra_dc_stop(struct tegra_dc *dc) -- cgit v1.2.3 From a24f98176d1efae2c37d3438c57a624d530d9c33 Mon Sep 17 00:00:00 2001 From: Mikko Perttunen Date: Mon, 29 Mar 2021 16:38:27 +0300 Subject: gpu: host1x: Use different lock classes for each client To avoid false lockdep warnings, give each client lock a different lock class, passed from the initialization site by macro. Signed-off-by: Mikko Perttunen Signed-off-by: Thierry Reding --- drivers/gpu/host1x/bus.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/host1x/bus.c b/drivers/gpu/host1x/bus.c index 347fb962b6c9..68a766ff0e9d 100644 --- a/drivers/gpu/host1x/bus.c +++ b/drivers/gpu/host1x/bus.c @@ -705,8 +705,9 @@ void host1x_driver_unregister(struct host1x_driver *driver) EXPORT_SYMBOL(host1x_driver_unregister); /** - * host1x_client_register() - register a host1x client + * __host1x_client_register() - register a host1x client * @client: host1x client + * @key: lock class key for the client-specific mutex * * Registers a host1x client with each host1x controller instance. Note that * each client will only match their parent host1x controller and will only be @@ -715,13 +716,14 @@ EXPORT_SYMBOL(host1x_driver_unregister); * device and call host1x_device_init(), which will in turn call each client's * &host1x_client_ops.init implementation. */ -int host1x_client_register(struct host1x_client *client) +int __host1x_client_register(struct host1x_client *client, + struct lock_class_key *key) { struct host1x *host1x; int err; INIT_LIST_HEAD(&client->list); - mutex_init(&client->lock); + __mutex_init(&client->lock, "host1x client lock", key); client->usecount = 0; mutex_lock(&devices_lock); @@ -742,7 +744,7 @@ int host1x_client_register(struct host1x_client *client) return 0; } -EXPORT_SYMBOL(host1x_client_register); +EXPORT_SYMBOL(__host1x_client_register); /** * host1x_client_unregister() - unregister a host1x client -- cgit v1.2.3 From a31500fe7055451ed9043c8fff938dfa6f70ee37 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 19 Mar 2021 08:06:37 +0100 Subject: drm/tegra: dc: Restore coupling of display controllers Coupling of display controllers used to rely on runtime PM to take the companion controller out of reset. Commit fd67e9c6ed5a ("drm/tegra: Do not implement runtime PM") accidentally broke this when runtime PM was removed. Restore this functionality by reusing the hierarchical host1x client suspend/resume infrastructure that's similar to runtime PM and which perfectly fits this use-case. Fixes: fd67e9c6ed5a ("drm/tegra: Do not implement runtime PM") Reported-by: Dmitry Osipenko Reported-by: Paul Fertser Tested-by: Dmitry Osipenko Signed-off-by: Thierry Reding --- drivers/gpu/drm/tegra/dc.c | 20 ++++++++------------ 1 file changed, 8 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/tegra/dc.c b/drivers/gpu/drm/tegra/dc.c index 24362533e14c..134986dc2783 100644 --- a/drivers/gpu/drm/tegra/dc.c +++ b/drivers/gpu/drm/tegra/dc.c @@ -2501,22 +2501,18 @@ static int tegra_dc_couple(struct tegra_dc *dc) * POWER_CONTROL registers during CRTC enabling. */ if (dc->soc->coupled_pm && dc->pipe == 1) { - u32 flags = DL_FLAG_PM_RUNTIME | DL_FLAG_AUTOREMOVE_CONSUMER; - struct device_link *link; - struct device *partner; + struct device *companion; + struct tegra_dc *parent; - partner = driver_find_device(dc->dev->driver, NULL, NULL, - tegra_dc_match_by_pipe); - if (!partner) + companion = driver_find_device(dc->dev->driver, NULL, (const void *)0, + tegra_dc_match_by_pipe); + if (!companion) return -EPROBE_DEFER; - link = device_link_add(dc->dev, partner, flags); - if (!link) { - dev_err(dc->dev, "failed to link controllers\n"); - return -EINVAL; - } + parent = dev_get_drvdata(companion); + dc->client.parent = &parent->client; - dev_dbg(dc->dev, "coupled to %s\n", dev_name(partner)); + dev_dbg(dc->dev, "coupled to %s\n", dev_name(companion)); } return 0; -- cgit v1.2.3 From ac097aecfef0bb289ca53d2fe0b73fc7e1612a05 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 19 Mar 2021 14:17:22 +0100 Subject: drm/tegra: sor: Grab runtime PM reference across reset The SOR resets are exclusively shared with the SOR power domain. This means that exclusive access can only be granted temporarily and in order for that to work, a rigorous sequence must be observed. To ensure that a single consumer gets exclusive access to a reset, each consumer must implement a rigorous protocol using the reset_control_acquire() and reset_control_release() functions. However, these functions alone don't provide any guarantees at the system level. Drivers need to ensure that the only a single consumer has access to the reset at the same time. In order for the SOR to be able to exclusively access its reset, it must therefore ensure that the SOR power domain is not powered off by holding on to a runtime PM reference to that power domain across the reset assert/deassert operation. This used to work fine by accident, but was revealed when recently more devices started to rely on the SOR power domain. Fixes: 11c632e1cfd3 ("drm/tegra: sor: Implement acquire/release for reset") Reported-by: Jonathan Hunter Signed-off-by: Thierry Reding --- drivers/gpu/drm/tegra/sor.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/tegra/sor.c b/drivers/gpu/drm/tegra/sor.c index f02a035dda45..7b88261f57bb 100644 --- a/drivers/gpu/drm/tegra/sor.c +++ b/drivers/gpu/drm/tegra/sor.c @@ -3115,6 +3115,12 @@ static int tegra_sor_init(struct host1x_client *client) * kernel is possible. */ if (sor->rst) { + err = pm_runtime_resume_and_get(sor->dev); + if (err < 0) { + dev_err(sor->dev, "failed to get runtime PM: %d\n", err); + return err; + } + err = reset_control_acquire(sor->rst); if (err < 0) { dev_err(sor->dev, "failed to acquire SOR reset: %d\n", @@ -3148,6 +3154,7 @@ static int tegra_sor_init(struct host1x_client *client) } reset_control_release(sor->rst); + pm_runtime_put(sor->dev); } err = clk_prepare_enable(sor->clk_safe); -- cgit v1.2.3 From 3e759425cc3cf9a43392309819d34c65a3644c59 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 30 Mar 2021 20:49:32 +0200 Subject: ACPI: scan: Fix _STA getting called on devices with unmet dependencies Commit 71da201f38df ("ACPI: scan: Defer enumeration of devices with _DEP lists") dropped the following 2 lines from acpi_init_device_object(): /* Assume there are unmet deps until acpi_device_dep_initialize() runs */ device->dep_unmet = 1; Leaving the initial value of dep_unmet at the 0 from the kzalloc(). This causes the acpi_bus_get_status() call in acpi_add_single_object() to actually call _STA, even though there maybe unmet deps, leading to errors like these: [ 0.123579] ACPI Error: No handler for Region [ECRM] (00000000ba9edc4c) [GenericSerialBus] (20170831/evregion-166) [ 0.123601] ACPI Error: Region GenericSerialBus (ID=9) has no handler (20170831/exfldio-299) [ 0.123618] ACPI Error: Method parse/execution failed \_SB.I2C1.BAT1._STA, AE_NOT_EXIST (20170831/psparse-550) Fix this by re-adding the dep_unmet = 1 initialization to acpi_init_device_object() and modifying acpi_bus_check_add() to make sure that dep_unmet always gets setup there, overriding the initial 1 value. This re-fixes the issue initially fixed by commit 63347db0affa ("ACPI / scan: Use acpi_bus_get_status() to initialize ACPI_TYPE_DEVICE devs"), which introduced the removed "device->dep_unmet = 1;" statement. This issue was noticed; and the fix tested on a Dell Venue 10 Pro 5055. Fixes: 71da201f38df ("ACPI: scan: Defer enumeration of devices with _DEP lists") Suggested-by: Rafael J. Wysocki Signed-off-by: Hans de Goede Cc: 5.11+ # 5.11+ Signed-off-by: Rafael J. Wysocki --- drivers/acpi/scan.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 84bb7c1929f1..6efe7edd7b1e 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -1670,6 +1670,8 @@ void acpi_init_device_object(struct acpi_device *device, acpi_handle handle, device_initialize(&device->dev); dev_set_uevent_suppress(&device->dev, true); acpi_init_coherency(device); + /* Assume there are unmet deps to start with. */ + device->dep_unmet = 1; } void acpi_device_add_finalize(struct acpi_device *device) @@ -1933,6 +1935,8 @@ static void acpi_scan_dep_init(struct acpi_device *adev) { struct acpi_dep_data *dep; + adev->dep_unmet = 0; + mutex_lock(&acpi_dep_list_lock); list_for_each_entry(dep, &acpi_dep_list, node) { @@ -1980,7 +1984,13 @@ static acpi_status acpi_bus_check_add(acpi_handle handle, bool check_dep, return AE_CTRL_DEPTH; acpi_scan_init_hotplug(device); - if (!check_dep) + /* + * If check_dep is true at this point, the device has no dependencies, + * or the creation of the device object would have been postponed above. + */ + if (check_dep) + device->dep_unmet = 0; + else acpi_scan_dep_init(device); out: -- cgit v1.2.3 From 2ea538dbee1c79f6f6c24a6f2f82986e4b7ccb78 Mon Sep 17 00:00:00 2001 From: Yinjun Zhang Date: Tue, 30 Mar 2021 10:30:23 +0200 Subject: nfp: flower: ignore duplicate merge hints from FW A merge hint message needs some time to process before the merged flow actually reaches the firmware, during which we may get duplicate merge hints if there're more than one packet that hit the pre-merged flow. And processing duplicate merge hints will cost extra host_ctx's which are a limited resource. Avoid the duplicate merge by using hash table to store the sub_flows to be merged. Fixes: 8af56f40e53b ("nfp: flower: offload merge flows") Signed-off-by: Yinjun Zhang Signed-off-by: Louis Peens Signed-off-by: Simon Horman Signed-off-by: David S. Miller --- drivers/net/ethernet/netronome/nfp/flower/main.h | 8 ++++ .../net/ethernet/netronome/nfp/flower/metadata.c | 16 +++++++- .../net/ethernet/netronome/nfp/flower/offload.c | 48 +++++++++++++++++++++- 3 files changed, 69 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/netronome/nfp/flower/main.h b/drivers/net/ethernet/netronome/nfp/flower/main.h index caf12eec9945..56833a41f3d2 100644 --- a/drivers/net/ethernet/netronome/nfp/flower/main.h +++ b/drivers/net/ethernet/netronome/nfp/flower/main.h @@ -190,6 +190,7 @@ struct nfp_fl_internal_ports { * @qos_rate_limiters: Current active qos rate limiters * @qos_stats_lock: Lock on qos stats updates * @pre_tun_rule_cnt: Number of pre-tunnel rules offloaded + * @merge_table: Hash table to store merged flows */ struct nfp_flower_priv { struct nfp_app *app; @@ -223,6 +224,7 @@ struct nfp_flower_priv { unsigned int qos_rate_limiters; spinlock_t qos_stats_lock; /* Protect the qos stats */ int pre_tun_rule_cnt; + struct rhashtable merge_table; }; /** @@ -350,6 +352,12 @@ struct nfp_fl_payload_link { }; extern const struct rhashtable_params nfp_flower_table_params; +extern const struct rhashtable_params merge_table_params; + +struct nfp_merge_info { + u64 parent_ctx; + struct rhash_head ht_node; +}; struct nfp_fl_stats_frame { __be32 stats_con_id; diff --git a/drivers/net/ethernet/netronome/nfp/flower/metadata.c b/drivers/net/ethernet/netronome/nfp/flower/metadata.c index aa06fcb38f8b..327bb56b3ef5 100644 --- a/drivers/net/ethernet/netronome/nfp/flower/metadata.c +++ b/drivers/net/ethernet/netronome/nfp/flower/metadata.c @@ -490,6 +490,12 @@ const struct rhashtable_params nfp_flower_table_params = { .automatic_shrinking = true, }; +const struct rhashtable_params merge_table_params = { + .key_offset = offsetof(struct nfp_merge_info, parent_ctx), + .head_offset = offsetof(struct nfp_merge_info, ht_node), + .key_len = sizeof(u64), +}; + int nfp_flower_metadata_init(struct nfp_app *app, u64 host_ctx_count, unsigned int host_num_mems) { @@ -506,6 +512,10 @@ int nfp_flower_metadata_init(struct nfp_app *app, u64 host_ctx_count, if (err) goto err_free_flow_table; + err = rhashtable_init(&priv->merge_table, &merge_table_params); + if (err) + goto err_free_stats_ctx_table; + get_random_bytes(&priv->mask_id_seed, sizeof(priv->mask_id_seed)); /* Init ring buffer and unallocated mask_ids. */ @@ -513,7 +523,7 @@ int nfp_flower_metadata_init(struct nfp_app *app, u64 host_ctx_count, kmalloc_array(NFP_FLOWER_MASK_ENTRY_RS, NFP_FLOWER_MASK_ELEMENT_RS, GFP_KERNEL); if (!priv->mask_ids.mask_id_free_list.buf) - goto err_free_stats_ctx_table; + goto err_free_merge_table; priv->mask_ids.init_unallocated = NFP_FLOWER_MASK_ENTRY_RS - 1; @@ -550,6 +560,8 @@ err_free_last_used: kfree(priv->mask_ids.last_used); err_free_mask_id: kfree(priv->mask_ids.mask_id_free_list.buf); +err_free_merge_table: + rhashtable_destroy(&priv->merge_table); err_free_stats_ctx_table: rhashtable_destroy(&priv->stats_ctx_table); err_free_flow_table: @@ -568,6 +580,8 @@ void nfp_flower_metadata_cleanup(struct nfp_app *app) nfp_check_rhashtable_empty, NULL); rhashtable_free_and_destroy(&priv->stats_ctx_table, nfp_check_rhashtable_empty, NULL); + rhashtable_free_and_destroy(&priv->merge_table, + nfp_check_rhashtable_empty, NULL); kvfree(priv->stats); kfree(priv->mask_ids.mask_id_free_list.buf); kfree(priv->mask_ids.last_used); diff --git a/drivers/net/ethernet/netronome/nfp/flower/offload.c b/drivers/net/ethernet/netronome/nfp/flower/offload.c index d72225d64a75..e95969c462e4 100644 --- a/drivers/net/ethernet/netronome/nfp/flower/offload.c +++ b/drivers/net/ethernet/netronome/nfp/flower/offload.c @@ -1009,6 +1009,8 @@ int nfp_flower_merge_offloaded_flows(struct nfp_app *app, struct netlink_ext_ack *extack = NULL; struct nfp_fl_payload *merge_flow; struct nfp_fl_key_ls merge_key_ls; + struct nfp_merge_info *merge_info; + u64 parent_ctx = 0; int err; ASSERT_RTNL(); @@ -1019,6 +1021,15 @@ int nfp_flower_merge_offloaded_flows(struct nfp_app *app, nfp_flower_is_merge_flow(sub_flow2)) return -EINVAL; + /* check if the two flows are already merged */ + parent_ctx = (u64)(be32_to_cpu(sub_flow1->meta.host_ctx_id)) << 32; + parent_ctx |= (u64)(be32_to_cpu(sub_flow2->meta.host_ctx_id)); + if (rhashtable_lookup_fast(&priv->merge_table, + &parent_ctx, merge_table_params)) { + nfp_flower_cmsg_warn(app, "The two flows are already merged.\n"); + return 0; + } + err = nfp_flower_can_merge(sub_flow1, sub_flow2); if (err) return err; @@ -1060,16 +1071,33 @@ int nfp_flower_merge_offloaded_flows(struct nfp_app *app, if (err) goto err_release_metadata; + merge_info = kmalloc(sizeof(*merge_info), GFP_KERNEL); + if (!merge_info) { + err = -ENOMEM; + goto err_remove_rhash; + } + merge_info->parent_ctx = parent_ctx; + err = rhashtable_insert_fast(&priv->merge_table, &merge_info->ht_node, + merge_table_params); + if (err) + goto err_destroy_merge_info; + err = nfp_flower_xmit_flow(app, merge_flow, NFP_FLOWER_CMSG_TYPE_FLOW_MOD); if (err) - goto err_remove_rhash; + goto err_remove_merge_info; merge_flow->in_hw = true; sub_flow1->in_hw = false; return 0; +err_remove_merge_info: + WARN_ON_ONCE(rhashtable_remove_fast(&priv->merge_table, + &merge_info->ht_node, + merge_table_params)); +err_destroy_merge_info: + kfree(merge_info); err_remove_rhash: WARN_ON_ONCE(rhashtable_remove_fast(&priv->flow_table, &merge_flow->fl_node, @@ -1359,7 +1387,9 @@ nfp_flower_remove_merge_flow(struct nfp_app *app, { struct nfp_flower_priv *priv = app->priv; struct nfp_fl_payload_link *link, *temp; + struct nfp_merge_info *merge_info; struct nfp_fl_payload *origin; + u64 parent_ctx = 0; bool mod = false; int err; @@ -1396,8 +1426,22 @@ nfp_flower_remove_merge_flow(struct nfp_app *app, err_free_links: /* Clean any links connected with the merged flow. */ list_for_each_entry_safe(link, temp, &merge_flow->linked_flows, - merge_flow.list) + merge_flow.list) { + u32 ctx_id = be32_to_cpu(link->sub_flow.flow->meta.host_ctx_id); + + parent_ctx = (parent_ctx << 32) | (u64)(ctx_id); nfp_flower_unlink_flow(link); + } + + merge_info = rhashtable_lookup_fast(&priv->merge_table, + &parent_ctx, + merge_table_params); + if (merge_info) { + WARN_ON_ONCE(rhashtable_remove_fast(&priv->merge_table, + &merge_info->ht_node, + merge_table_params)); + kfree(merge_info); + } kfree(merge_flow->action_data); kfree(merge_flow->mask_data); -- cgit v1.2.3 From c056d480b40a68f2520ccc156c7fae672d69d57d Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Tue, 30 Mar 2021 15:00:24 -0700 Subject: net: phy: broadcom: Only advertise EEE for supported modes We should not be advertising EEE for modes that we do not support, correct that oversight by looking at the PHY device supported linkmodes. Fixes: 99cec8a4dda2 ("net: phy: broadcom: Allow enabling or disabling of EEE") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/bcm-phy-lib.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/bcm-phy-lib.c b/drivers/net/phy/bcm-phy-lib.c index 53282a6d5928..287cccf8f7f4 100644 --- a/drivers/net/phy/bcm-phy-lib.c +++ b/drivers/net/phy/bcm-phy-lib.c @@ -369,7 +369,7 @@ EXPORT_SYMBOL_GPL(bcm_phy_enable_apd); int bcm_phy_set_eee(struct phy_device *phydev, bool enable) { - int val; + int val, mask = 0; /* Enable EEE at PHY level */ val = phy_read_mmd(phydev, MDIO_MMD_AN, BRCM_CL45VEN_EEE_CONTROL); @@ -388,10 +388,17 @@ int bcm_phy_set_eee(struct phy_device *phydev, bool enable) if (val < 0) return val; + if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, + phydev->supported)) + mask |= MDIO_EEE_1000T; + if (linkmode_test_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, + phydev->supported)) + mask |= MDIO_EEE_100TX; + if (enable) - val |= (MDIO_EEE_100TX | MDIO_EEE_1000T); + val |= mask; else - val &= ~(MDIO_EEE_100TX | MDIO_EEE_1000T); + val &= ~mask; phy_write_mmd(phydev, MDIO_MMD_AN, BCM_CL45VEN_EEE_ADV, (u32)val); -- cgit v1.2.3 From 942bfbecc0281c75db84f744b9b77b0f2396f484 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=E5=91=A8=E7=90=B0=E6=9D=B0=20=28Zhou=20Yanjie=29?= Date: Fri, 19 Mar 2021 18:12:13 +0800 Subject: I2C: JZ4780: Fix bug for Ingenic X1000. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Only send "X1000_I2C_DC_STOP" when last byte, or it will cause error when I2C write operation which should look like this: device_addr + w, reg_addr, data; But without this patch, it looks like this: device_addr + w, reg_addr, device_addr + w, data; Fixes: 21575a7a8d4c ("I2C: JZ4780: Add support for the X1000.") Reported-by: 杨文龙 (Yang Wenlong) Tested-by: 杨文龙 (Yang Wenlong) Signed-off-by: 周琰杰 (Zhou Yanjie) Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-jz4780.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-jz4780.c b/drivers/i2c/busses/i2c-jz4780.c index 8509c5f11356..55177eb21d7b 100644 --- a/drivers/i2c/busses/i2c-jz4780.c +++ b/drivers/i2c/busses/i2c-jz4780.c @@ -525,8 +525,8 @@ static irqreturn_t jz4780_i2c_irq(int irqno, void *dev_id) i2c_sta = jz4780_i2c_readw(i2c, JZ4780_I2C_STA); data = *i2c->wbuf; data &= ~JZ4780_I2C_DC_READ; - if ((!i2c->stop_hold) && (i2c->cdata->version >= - ID_X1000)) + if ((i2c->wt_len == 1) && (!i2c->stop_hold) && + (i2c->cdata->version >= ID_X1000)) data |= X1000_I2C_DC_STOP; jz4780_i2c_writew(i2c, JZ4780_I2C_DC, data); i2c->wbuf++; -- cgit v1.2.3 From 67ff1d98652ac141f46b3871ebc34350ddffa2ef Mon Sep 17 00:00:00 2001 From: Bhaskar Chowdhury Date: Wed, 24 Mar 2021 19:36:10 +0530 Subject: i2c: stm32f4: Mundane typo fix s/postion/position/ Signed-off-by: Bhaskar Chowdhury Acked-by: Randy Dunlap Reviewed-by: Alain Volmat Reviewed-by: Pierre-Yves MORDRET Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-stm32f4.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-stm32f4.c b/drivers/i2c/busses/i2c-stm32f4.c index 937c2c8fd349..4933fc8ce3fd 100644 --- a/drivers/i2c/busses/i2c-stm32f4.c +++ b/drivers/i2c/busses/i2c-stm32f4.c @@ -534,7 +534,7 @@ static void stm32f4_i2c_handle_rx_addr(struct stm32f4_i2c_dev *i2c_dev) default: /* * N-byte reception: - * Enable ACK, reset POS (ACK postion) and clear ADDR flag. + * Enable ACK, reset POS (ACK position) and clear ADDR flag. * In that way, ACK will be sent as soon as the current byte * will be received in the shift register */ -- cgit v1.2.3 From 629a411f7e71afeee34edd4c1418c4e7f7d5575a Mon Sep 17 00:00:00 2001 From: Hao Fang Date: Tue, 30 Mar 2021 14:37:14 +0800 Subject: i2c: hix5hd2: use the correct HiSilicon copyright s/Hisilicon/HiSilicon/g. It should use capital S, according to https://www.hisilicon.com/en/terms-of-use. Signed-off-by: Hao Fang Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-hix5hd2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-hix5hd2.c b/drivers/i2c/busses/i2c-hix5hd2.c index c45f226c2b85..aa00ba8bcb70 100644 --- a/drivers/i2c/busses/i2c-hix5hd2.c +++ b/drivers/i2c/busses/i2c-hix5hd2.c @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (c) 2014 Linaro Ltd. - * Copyright (c) 2014 Hisilicon Limited. + * Copyright (c) 2014 HiSilicon Limited. * * Now only support 7 bit address. */ -- cgit v1.2.3 From 23cf00ddd2e1aacf1873e43f5e0c519c120daf7a Mon Sep 17 00:00:00 2001 From: Matti Vaittinen Date: Mon, 29 Mar 2021 14:41:12 +0300 Subject: gpio: sysfs: Obey valid_mask Do not allow exporting GPIOs which are set invalid by the driver's valid mask. Fixes: 726cb3ba4969 ("gpiolib: Support 'gpio-reserved-ranges' property") Signed-off-by: Matti Vaittinen Reviewed-by: Andy Shevchenko Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpiolib-sysfs.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/gpio/gpiolib-sysfs.c b/drivers/gpio/gpiolib-sysfs.c index 26c5466b8179..ae49bb23c6ed 100644 --- a/drivers/gpio/gpiolib-sysfs.c +++ b/drivers/gpio/gpiolib-sysfs.c @@ -458,6 +458,8 @@ static ssize_t export_store(struct class *class, long gpio; struct gpio_desc *desc; int status; + struct gpio_chip *gc; + int offset; status = kstrtol(buf, 0, &gpio); if (status < 0) @@ -469,6 +471,12 @@ static ssize_t export_store(struct class *class, pr_warn("%s: invalid GPIO %ld\n", __func__, gpio); return -EINVAL; } + gc = desc->gdev->chip; + offset = gpio_chip_hwgpio(desc); + if (!gpiochip_line_is_valid(gc, offset)) { + pr_warn("%s: GPIO %ld masked\n", __func__, gpio); + return -EINVAL; + } /* No extra locking here; FLAG_SYSFS just signifies that the * request and export were done by on behalf of userspace, so -- cgit v1.2.3 From d24f847e54214049814b9515771622eaab3f42ab Mon Sep 17 00:00:00 2001 From: Ariel Levkovich Date: Tue, 9 Mar 2021 01:29:01 +0200 Subject: net/mlx5e: Fix mapping of ct_label zero ct_label 0 is a default label each flow has and therefore there can be rules that match on ct_label=0 without a prior rule that set the ct_label to this value. The ct_label value is not used directly in the HW rules and instead it is mapped to some id within a defined range and this id is used to set and match the metadata register which carries the ct_label. If we have a rule that matches on ct_label=0, the hw rule will perform matching on a value that is != 0 because of the mapping from label to id. Since the metadata register default value is 0 and it was never set before to anything else by an action that sets the ct_label, there will always be a mismatch between that register and the value in the rule. To support such rule, a forced mapping of ct_label 0 to id=0 is done so that it will match the metadata register default value of 0. Fixes: 54b154ecfb8c ("net/mlx5e: CT: Map 128 bits labels to 32 bit map ID") Signed-off-by: Ariel Levkovich Reviewed-by: Roi Dayan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c | 36 +++++++++++++++++----- 1 file changed, 29 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c index b2cd29847a37..68e54cc1cd16 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c @@ -185,6 +185,28 @@ mlx5_tc_ct_entry_has_nat(struct mlx5_ct_entry *entry) return !!(entry->tuple_nat_node.next); } +static int +mlx5_get_label_mapping(struct mlx5_tc_ct_priv *ct_priv, + u32 *labels, u32 *id) +{ + if (!memchr_inv(labels, 0, sizeof(u32) * 4)) { + *id = 0; + return 0; + } + + if (mapping_add(ct_priv->labels_mapping, labels, id)) + return -EOPNOTSUPP; + + return 0; +} + +static void +mlx5_put_label_mapping(struct mlx5_tc_ct_priv *ct_priv, u32 id) +{ + if (id) + mapping_remove(ct_priv->labels_mapping, id); +} + static int mlx5_tc_ct_rule_to_tuple(struct mlx5_ct_tuple *tuple, struct flow_rule *rule) { @@ -436,7 +458,7 @@ mlx5_tc_ct_entry_del_rule(struct mlx5_tc_ct_priv *ct_priv, mlx5_tc_rule_delete(netdev_priv(ct_priv->netdev), zone_rule->rule, attr); mlx5e_mod_hdr_detach(ct_priv->dev, ct_priv->mod_hdr_tbl, zone_rule->mh); - mapping_remove(ct_priv->labels_mapping, attr->ct_attr.ct_labels_id); + mlx5_put_label_mapping(ct_priv, attr->ct_attr.ct_labels_id); kfree(attr); } @@ -639,8 +661,8 @@ mlx5_tc_ct_entry_create_mod_hdr(struct mlx5_tc_ct_priv *ct_priv, if (!meta) return -EOPNOTSUPP; - err = mapping_add(ct_priv->labels_mapping, meta->ct_metadata.labels, - &attr->ct_attr.ct_labels_id); + err = mlx5_get_label_mapping(ct_priv, meta->ct_metadata.labels, + &attr->ct_attr.ct_labels_id); if (err) return -EOPNOTSUPP; if (nat) { @@ -677,7 +699,7 @@ mlx5_tc_ct_entry_create_mod_hdr(struct mlx5_tc_ct_priv *ct_priv, err_mapping: dealloc_mod_hdr_actions(&mod_acts); - mapping_remove(ct_priv->labels_mapping, attr->ct_attr.ct_labels_id); + mlx5_put_label_mapping(ct_priv, attr->ct_attr.ct_labels_id); return err; } @@ -745,7 +767,7 @@ mlx5_tc_ct_entry_add_rule(struct mlx5_tc_ct_priv *ct_priv, err_rule: mlx5e_mod_hdr_detach(ct_priv->dev, ct_priv->mod_hdr_tbl, zone_rule->mh); - mapping_remove(ct_priv->labels_mapping, attr->ct_attr.ct_labels_id); + mlx5_put_label_mapping(ct_priv, attr->ct_attr.ct_labels_id); err_mod_hdr: kfree(attr); err_attr: @@ -1197,7 +1219,7 @@ void mlx5_tc_ct_match_del(struct mlx5_tc_ct_priv *priv, struct mlx5_ct_attr *ct_ if (!priv || !ct_attr->ct_labels_id) return; - mapping_remove(priv->labels_mapping, ct_attr->ct_labels_id); + mlx5_put_label_mapping(priv, ct_attr->ct_labels_id); } int @@ -1280,7 +1302,7 @@ mlx5_tc_ct_match_add(struct mlx5_tc_ct_priv *priv, ct_labels[1] = key->ct_labels[1] & mask->ct_labels[1]; ct_labels[2] = key->ct_labels[2] & mask->ct_labels[2]; ct_labels[3] = key->ct_labels[3] & mask->ct_labels[3]; - if (mapping_add(priv->labels_mapping, ct_labels, &ct_attr->ct_labels_id)) + if (mlx5_get_label_mapping(priv, ct_labels, &ct_attr->ct_labels_id)) return -EOPNOTSUPP; mlx5e_tc_match_to_reg_match(spec, LABELS_TO_REG, ct_attr->ct_labels_id, MLX5_CT_LABELS_MASK); -- cgit v1.2.3 From 1f90aedfb496ccccf862c7b7c0889af20c2fc61a Mon Sep 17 00:00:00 2001 From: Maor Dickman Date: Mon, 22 Mar 2021 17:22:03 +0200 Subject: net/mlx5: Delete auxiliary bus driver eth-rep first Delete auxiliary bus drivers flow deletes the eth driver first and then the eth-reps driver but eth-reps devices resources are depend on eth device. Fixed by changing the delete order of auxiliary bus drivers to delete the eth-rep driver first and after it the eth driver. Fixes: 601c10c89cbb ("net/mlx5: Delete custom device management logic") Signed-off-by: Maor Dickman Reviewed-by: Leon Romanovsky Reviewed-by: Roi Dayan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/dev.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/dev.c b/drivers/net/ethernet/mellanox/mlx5/core/dev.c index b051417ede67..9153c9bda96f 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/dev.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/dev.c @@ -191,12 +191,12 @@ static bool is_ib_supported(struct mlx5_core_dev *dev) } enum { - MLX5_INTERFACE_PROTOCOL_ETH_REP, MLX5_INTERFACE_PROTOCOL_ETH, + MLX5_INTERFACE_PROTOCOL_ETH_REP, + MLX5_INTERFACE_PROTOCOL_IB, MLX5_INTERFACE_PROTOCOL_IB_REP, MLX5_INTERFACE_PROTOCOL_MPIB, - MLX5_INTERFACE_PROTOCOL_IB, MLX5_INTERFACE_PROTOCOL_VNET, }; -- cgit v1.2.3 From 3211434dfe7a66fcf55e43961ea524b78336c04c Mon Sep 17 00:00:00 2001 From: Aya Levin Date: Wed, 24 Mar 2021 12:25:06 +0200 Subject: net/mlx5e: Fix ethtool indication of connector type Use connector_type read from PTYS register when it's valid, based on corresponding capability bit. Fixes: 5b4793f81745 ("net/mlx5e: Add support for reading connector type from PTYS") Signed-off-by: Aya Levin Reviewed-by: Eran Ben Elisha Signed-off-by: Saeed Mahameed --- .../net/ethernet/mellanox/mlx5/core/en_ethtool.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index f5f2a8fd0046..53802e18af90 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -758,11 +758,11 @@ static int get_fec_supported_advertised(struct mlx5_core_dev *dev, return 0; } -static void ptys2ethtool_supported_advertised_port(struct ethtool_link_ksettings *link_ksettings, - u32 eth_proto_cap, - u8 connector_type, bool ext) +static void ptys2ethtool_supported_advertised_port(struct mlx5_core_dev *mdev, + struct ethtool_link_ksettings *link_ksettings, + u32 eth_proto_cap, u8 connector_type) { - if ((!connector_type && !ext) || connector_type >= MLX5E_CONNECTOR_TYPE_NUMBER) { + if (!MLX5_CAP_PCAM_FEATURE(mdev, ptys_connector_type)) { if (eth_proto_cap & (MLX5E_PROT_MASK(MLX5E_10GBASE_CR) | MLX5E_PROT_MASK(MLX5E_10GBASE_SR) | MLX5E_PROT_MASK(MLX5E_40GBASE_CR4) @@ -898,9 +898,9 @@ static int ptys2connector_type[MLX5E_CONNECTOR_TYPE_NUMBER] = { [MLX5E_PORT_OTHER] = PORT_OTHER, }; -static u8 get_connector_port(u32 eth_proto, u8 connector_type, bool ext) +static u8 get_connector_port(struct mlx5_core_dev *mdev, u32 eth_proto, u8 connector_type) { - if ((connector_type || ext) && connector_type < MLX5E_CONNECTOR_TYPE_NUMBER) + if (MLX5_CAP_PCAM_FEATURE(mdev, ptys_connector_type)) return ptys2connector_type[connector_type]; if (eth_proto & @@ -1001,11 +1001,11 @@ int mlx5e_ethtool_get_link_ksettings(struct mlx5e_priv *priv, data_rate_oper, link_ksettings); eth_proto_oper = eth_proto_oper ? eth_proto_oper : eth_proto_cap; - - link_ksettings->base.port = get_connector_port(eth_proto_oper, - connector_type, ext); - ptys2ethtool_supported_advertised_port(link_ksettings, eth_proto_admin, - connector_type, ext); + connector_type = connector_type < MLX5E_CONNECTOR_TYPE_NUMBER ? + connector_type : MLX5E_PORT_UNKNOWN; + link_ksettings->base.port = get_connector_port(mdev, eth_proto_oper, connector_type); + ptys2ethtool_supported_advertised_port(mdev, link_ksettings, eth_proto_admin, + connector_type); get_lp_advertising(mdev, eth_proto_lp, link_ksettings); if (an_status == MLX5_AN_COMPLETE) -- cgit v1.2.3 From e929e3da537e3c2d97aabbd00530040997dde9ce Mon Sep 17 00:00:00 2001 From: Maor Dickman Date: Mon, 15 Mar 2021 15:20:29 +0200 Subject: net/mlx5: E-switch, Create vport miss group only if src rewrite is supported Create send to vport miss group was added in order to support traffic recirculation to root table with metadata source rewrite. This group is created also in case source rewrite isn't supported. Fixed by creating send to vport miss group only if source rewrite is supported by FW. Fixes: 8e404fefa58b ("net/mlx5e: Match recirculated packet miss in slow table using reg_c1") Signed-off-by: Maor Dickman Reviewed-by: Vlad Buslov Reviewed-by: Roi Dayan Signed-off-by: Saeed Mahameed --- .../ethernet/mellanox/mlx5/core/eswitch_offloads.c | 68 +++++++++++++--------- 1 file changed, 39 insertions(+), 29 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c index 8694b83968b4..d4a2f8d1ee9f 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c @@ -537,6 +537,14 @@ esw_setup_vport_dests(struct mlx5_flow_destination *dest, struct mlx5_flow_act * return i; } +static bool +esw_src_port_rewrite_supported(struct mlx5_eswitch *esw) +{ + return MLX5_CAP_GEN(esw->dev, reg_c_preserve) && + mlx5_eswitch_vport_match_metadata_enabled(esw) && + MLX5_CAP_ESW_FLOWTABLE_FDB(esw->dev, ignore_flow_level); +} + static int esw_setup_dests(struct mlx5_flow_destination *dest, struct mlx5_flow_act *flow_act, @@ -550,9 +558,7 @@ esw_setup_dests(struct mlx5_flow_destination *dest, int err = 0; if (!mlx5_eswitch_termtbl_required(esw, attr, flow_act, spec) && - MLX5_CAP_GEN(esw_attr->in_mdev, reg_c_preserve) && - mlx5_eswitch_vport_match_metadata_enabled(esw) && - MLX5_CAP_ESW_FLOWTABLE_FDB(esw->dev, ignore_flow_level)) + esw_src_port_rewrite_supported(esw)) attr->flags |= MLX5_ESW_ATTR_FLAG_SRC_REWRITE; if (attr->dest_ft) { @@ -1716,36 +1722,40 @@ static int esw_create_offloads_fdb_tables(struct mlx5_eswitch *esw) } esw->fdb_table.offloads.send_to_vport_grp = g; - /* meta send to vport */ - memset(flow_group_in, 0, inlen); - MLX5_SET(create_flow_group_in, flow_group_in, match_criteria_enable, - MLX5_MATCH_MISC_PARAMETERS_2); - - match_criteria = MLX5_ADDR_OF(create_flow_group_in, flow_group_in, match_criteria); + if (esw_src_port_rewrite_supported(esw)) { + /* meta send to vport */ + memset(flow_group_in, 0, inlen); + MLX5_SET(create_flow_group_in, flow_group_in, match_criteria_enable, + MLX5_MATCH_MISC_PARAMETERS_2); - MLX5_SET(fte_match_param, match_criteria, - misc_parameters_2.metadata_reg_c_0, mlx5_eswitch_get_vport_metadata_mask()); - MLX5_SET(fte_match_param, match_criteria, - misc_parameters_2.metadata_reg_c_1, ESW_TUN_MASK); + match_criteria = MLX5_ADDR_OF(create_flow_group_in, flow_group_in, match_criteria); - num_vfs = esw->esw_funcs.num_vfs; - if (num_vfs) { - MLX5_SET(create_flow_group_in, flow_group_in, start_flow_index, ix); - MLX5_SET(create_flow_group_in, flow_group_in, end_flow_index, ix + num_vfs - 1); - ix += num_vfs; + MLX5_SET(fte_match_param, match_criteria, + misc_parameters_2.metadata_reg_c_0, + mlx5_eswitch_get_vport_metadata_mask()); + MLX5_SET(fte_match_param, match_criteria, + misc_parameters_2.metadata_reg_c_1, ESW_TUN_MASK); - g = mlx5_create_flow_group(fdb, flow_group_in); - if (IS_ERR(g)) { - err = PTR_ERR(g); - esw_warn(dev, "Failed to create send-to-vport meta flow group err(%d)\n", - err); - goto send_vport_meta_err; + num_vfs = esw->esw_funcs.num_vfs; + if (num_vfs) { + MLX5_SET(create_flow_group_in, flow_group_in, start_flow_index, ix); + MLX5_SET(create_flow_group_in, flow_group_in, + end_flow_index, ix + num_vfs - 1); + ix += num_vfs; + + g = mlx5_create_flow_group(fdb, flow_group_in); + if (IS_ERR(g)) { + err = PTR_ERR(g); + esw_warn(dev, "Failed to create send-to-vport meta flow group err(%d)\n", + err); + goto send_vport_meta_err; + } + esw->fdb_table.offloads.send_to_vport_meta_grp = g; + + err = mlx5_eswitch_add_send_to_vport_meta_rules(esw); + if (err) + goto meta_rule_err; } - esw->fdb_table.offloads.send_to_vport_meta_grp = g; - - err = mlx5_eswitch_add_send_to_vport_meta_rules(esw); - if (err) - goto meta_rule_err; } if (MLX5_CAP_ESW(esw->dev, merged_eswitch)) { -- cgit v1.2.3 From a51bce9698e951fec3fc0624060f124794ec3558 Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Sun, 28 Feb 2021 13:50:17 +0200 Subject: net/mlx5e: kTLS, Fix TX counters atomicity Some TLS TX counters increment per socket/connection, and are not protected against parallel modifications from several cores. Switch them to atomic counters by taking them out of the SQ stats into the global atomic TLS stats. In this patch, we touch a single counter 'tx_tls_ctx' that counts the number of device-offloaded TX TLS connections added. Now that this counter can be increased without the for having the SQ context in hand, move it to the mlx5e_ktls_add_tx() callback where it really belongs, out of the fast data-path. This change is not needed for counters that increment only in NAPI context or under the TX lock, as they are already protected. Keep them as tls_* counters under 'struct mlx5e_sq_stats'. Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support") Signed-off-by: Tariq Toukan Reviewed-by: Maxim Mikityanskiy Signed-off-by: Saeed Mahameed --- .../ethernet/mellanox/mlx5/core/en_accel/ktls_tx.c | 5 ++- .../net/ethernet/mellanox/mlx5/core/en_accel/tls.h | 1 + .../mellanox/mlx5/core/en_accel/tls_stats.c | 47 +++++++++++++--------- drivers/net/ethernet/mellanox/mlx5/core/en_stats.c | 4 -- drivers/net/ethernet/mellanox/mlx5/core/en_stats.h | 2 - 5 files changed, 33 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_tx.c index d16def68ecff..51bdf71073f3 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_tx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_tx.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB // Copyright (c) 2019 Mellanox Technologies. +#include "en_accel/tls.h" #include "en_accel/ktls_txrx.h" #include "en_accel/ktls_utils.h" @@ -50,6 +51,7 @@ static int mlx5e_ktls_create_tis(struct mlx5_core_dev *mdev, u32 *tisn) struct mlx5e_ktls_offload_context_tx { struct tls_offload_context_tx *tx_ctx; struct tls12_crypto_info_aes_gcm_128 crypto_info; + struct mlx5e_tls_sw_stats *sw_stats; u32 expected_seq; u32 tisn; u32 key_id; @@ -99,6 +101,7 @@ int mlx5e_ktls_add_tx(struct net_device *netdev, struct sock *sk, if (err) goto err_create_key; + priv_tx->sw_stats = &priv->tls->sw_stats; priv_tx->expected_seq = start_offload_tcp_sn; priv_tx->crypto_info = *(struct tls12_crypto_info_aes_gcm_128 *)crypto_info; @@ -111,6 +114,7 @@ int mlx5e_ktls_add_tx(struct net_device *netdev, struct sock *sk, goto err_create_tis; priv_tx->ctx_post_pending = true; + atomic64_inc(&priv_tx->sw_stats->tx_tls_ctx); return 0; @@ -452,7 +456,6 @@ bool mlx5e_ktls_handle_tx_skb(struct tls_context *tls_ctx, struct mlx5e_txqsq *s if (unlikely(mlx5e_ktls_tx_offload_test_and_clear_pending(priv_tx))) { mlx5e_ktls_tx_post_param_wqes(sq, priv_tx, false, false); - stats->tls_ctx++; } seq = ntohl(tcp_hdr(skb)->seq); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls.h b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls.h index bd270a85c804..5b408904df14 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls.h @@ -41,6 +41,7 @@ #include "en.h" struct mlx5e_tls_sw_stats { + atomic64_t tx_tls_ctx; atomic64_t tx_tls_drop_metadata; atomic64_t tx_tls_drop_resync_alloc; atomic64_t tx_tls_drop_no_sync_data; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls_stats.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls_stats.c index b949b9a7538b..a5aabc5c5236 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls_stats.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls_stats.c @@ -45,49 +45,58 @@ static const struct counter_desc mlx5e_tls_sw_stats_desc[] = { { MLX5E_DECLARE_STAT(struct mlx5e_tls_sw_stats, tx_tls_drop_bypass_required) }, }; +static const struct counter_desc mlx5e_ktls_sw_stats_desc[] = { + { MLX5E_DECLARE_STAT(struct mlx5e_tls_sw_stats, tx_tls_ctx) }, +}; + #define MLX5E_READ_CTR_ATOMIC64(ptr, dsc, i) \ atomic64_read((atomic64_t *)((char *)(ptr) + (dsc)[i].offset)) -#define NUM_TLS_SW_COUNTERS ARRAY_SIZE(mlx5e_tls_sw_stats_desc) - -static bool is_tls_atomic_stats(struct mlx5e_priv *priv) +static const struct counter_desc *get_tls_atomic_stats(struct mlx5e_priv *priv) { - return priv->tls && !mlx5_accel_is_ktls_device(priv->mdev); + if (!priv->tls) + return NULL; + if (mlx5_accel_is_ktls_device(priv->mdev)) + return mlx5e_ktls_sw_stats_desc; + return mlx5e_tls_sw_stats_desc; } int mlx5e_tls_get_count(struct mlx5e_priv *priv) { - if (!is_tls_atomic_stats(priv)) + if (!priv->tls) return 0; - - return NUM_TLS_SW_COUNTERS; + if (mlx5_accel_is_ktls_device(priv->mdev)) + return ARRAY_SIZE(mlx5e_ktls_sw_stats_desc); + return ARRAY_SIZE(mlx5e_tls_sw_stats_desc); } int mlx5e_tls_get_strings(struct mlx5e_priv *priv, uint8_t *data) { - unsigned int i, idx = 0; + const struct counter_desc *stats_desc; + unsigned int i, n, idx = 0; - if (!is_tls_atomic_stats(priv)) - return 0; + stats_desc = get_tls_atomic_stats(priv); + n = mlx5e_tls_get_count(priv); - for (i = 0; i < NUM_TLS_SW_COUNTERS; i++) + for (i = 0; i < n; i++) strcpy(data + (idx++) * ETH_GSTRING_LEN, - mlx5e_tls_sw_stats_desc[i].format); + stats_desc[i].format); - return NUM_TLS_SW_COUNTERS; + return n; } int mlx5e_tls_get_stats(struct mlx5e_priv *priv, u64 *data) { - int i, idx = 0; + const struct counter_desc *stats_desc; + unsigned int i, n, idx = 0; - if (!is_tls_atomic_stats(priv)) - return 0; + stats_desc = get_tls_atomic_stats(priv); + n = mlx5e_tls_get_count(priv); - for (i = 0; i < NUM_TLS_SW_COUNTERS; i++) + for (i = 0; i < n; i++) data[idx++] = MLX5E_READ_CTR_ATOMIC64(&priv->tls->sw_stats, - mlx5e_tls_sw_stats_desc, i); + stats_desc, i); - return NUM_TLS_SW_COUNTERS; + return n; } diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c index 92c5b81427b9..74adaa58189a 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c @@ -116,7 +116,6 @@ static const struct counter_desc sw_stats_desc[] = { #ifdef CONFIG_MLX5_EN_TLS { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_tls_encrypted_packets) }, { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_tls_encrypted_bytes) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_tls_ctx) }, { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_tls_ooo) }, { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_tls_dump_packets) }, { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_tls_dump_bytes) }, @@ -390,7 +389,6 @@ static void mlx5e_stats_grp_sw_update_stats_sq(struct mlx5e_sw_stats *s, #ifdef CONFIG_MLX5_EN_TLS s->tx_tls_encrypted_packets += sq_stats->tls_encrypted_packets; s->tx_tls_encrypted_bytes += sq_stats->tls_encrypted_bytes; - s->tx_tls_ctx += sq_stats->tls_ctx; s->tx_tls_ooo += sq_stats->tls_ooo; s->tx_tls_dump_bytes += sq_stats->tls_dump_bytes; s->tx_tls_dump_packets += sq_stats->tls_dump_packets; @@ -1650,7 +1648,6 @@ static const struct counter_desc sq_stats_desc[] = { #ifdef CONFIG_MLX5_EN_TLS { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, tls_encrypted_packets) }, { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, tls_encrypted_bytes) }, - { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, tls_ctx) }, { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, tls_ooo) }, { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, tls_dump_packets) }, { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, tls_dump_bytes) }, @@ -1776,7 +1773,6 @@ static const struct counter_desc qos_sq_stats_desc[] = { #ifdef CONFIG_MLX5_EN_TLS { MLX5E_DECLARE_QOS_TX_STAT(struct mlx5e_sq_stats, tls_encrypted_packets) }, { MLX5E_DECLARE_QOS_TX_STAT(struct mlx5e_sq_stats, tls_encrypted_bytes) }, - { MLX5E_DECLARE_QOS_TX_STAT(struct mlx5e_sq_stats, tls_ctx) }, { MLX5E_DECLARE_QOS_TX_STAT(struct mlx5e_sq_stats, tls_ooo) }, { MLX5E_DECLARE_QOS_TX_STAT(struct mlx5e_sq_stats, tls_dump_packets) }, { MLX5E_DECLARE_QOS_TX_STAT(struct mlx5e_sq_stats, tls_dump_bytes) }, diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h index 93c41312fb03..8eb056af79ba 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h @@ -191,7 +191,6 @@ struct mlx5e_sw_stats { #ifdef CONFIG_MLX5_EN_TLS u64 tx_tls_encrypted_packets; u64 tx_tls_encrypted_bytes; - u64 tx_tls_ctx; u64 tx_tls_ooo; u64 tx_tls_dump_packets; u64 tx_tls_dump_bytes; @@ -364,7 +363,6 @@ struct mlx5e_sq_stats { #ifdef CONFIG_MLX5_EN_TLS u64 tls_encrypted_packets; u64 tls_encrypted_bytes; - u64 tls_ctx; u64 tls_ooo; u64 tls_dump_packets; u64 tls_dump_bytes; -- cgit v1.2.3 From 6f4fdd530a09c8e2c7368ba5a5b1711e6e5ced10 Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Sun, 28 Feb 2021 15:00:45 +0200 Subject: net/mlx5e: kTLS, Fix RX counters atomicity Some TLS RX counters increment per socket/connection, and are not protected against parallel modifications from several cores. Switch them to atomic counters by taking them out of the RQ stats into the global atomic TLS stats. In this patch, we touch 'rx_tls_ctx/del' that count the number of device-offloaded RX TLS connections added/deleted. These counters are updated in the add/del callbacks, out of the fast data-path. This change is not needed for counters that increment only in NAPI context, as they are protected by the NAPI mechanism. Keep them as tls_* counters under 'struct mlx5e_rq_stats'. Fixes: 76c1e1ac2aae ("net/mlx5e: kTLS, Add kTLS RX stats") Signed-off-by: Tariq Toukan Reviewed-by: Maxim Mikityanskiy Signed-off-by: Saeed Mahameed --- .../ethernet/mellanox/mlx5/core/en_accel/ktls_rx.c | 22 ++++++++++++---------- .../net/ethernet/mellanox/mlx5/core/en_accel/tls.h | 2 ++ .../mellanox/mlx5/core/en_accel/tls_stats.c | 2 ++ drivers/net/ethernet/mellanox/mlx5/core/en_stats.c | 6 ------ drivers/net/ethernet/mellanox/mlx5/core/en_stats.h | 4 ---- 5 files changed, 16 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_rx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_rx.c index d06532d0baa4..57c5ebd597a7 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_rx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_rx.c @@ -46,7 +46,8 @@ struct mlx5e_ktls_offload_context_rx { struct tls12_crypto_info_aes_gcm_128 crypto_info; struct accel_rule rule; struct sock *sk; - struct mlx5e_rq_stats *stats; + struct mlx5e_rq_stats *rq_stats; + struct mlx5e_tls_sw_stats *sw_stats; struct completion add_ctx; u32 tirn; u32 key_id; @@ -218,7 +219,7 @@ unlock: return err; err_out: - priv_rx->stats->tls_resync_req_skip++; + priv_rx->rq_stats->tls_resync_req_skip++; err = PTR_ERR(cseg); complete(&priv_rx->add_ctx); goto unlock; @@ -322,7 +323,7 @@ err_dma_unmap: err_free: kfree(buf); err_out: - priv_rx->stats->tls_resync_req_skip++; + priv_rx->rq_stats->tls_resync_req_skip++; return err; } @@ -378,13 +379,13 @@ static int resync_handle_seq_match(struct mlx5e_ktls_offload_context_rx *priv_rx cseg = post_static_params(sq, priv_rx); if (IS_ERR(cseg)) { - priv_rx->stats->tls_resync_res_skip++; + priv_rx->rq_stats->tls_resync_res_skip++; err = PTR_ERR(cseg); goto unlock; } /* Do not increment priv_rx refcnt, CQE handling is empty */ mlx5e_notify_hw(&sq->wq, sq->pc, sq->uar_map, cseg); - priv_rx->stats->tls_resync_res_ok++; + priv_rx->rq_stats->tls_resync_res_ok++; unlock: spin_unlock_bh(&c->async_icosq_lock); @@ -420,13 +421,13 @@ void mlx5e_ktls_handle_get_psv_completion(struct mlx5e_icosq_wqe_info *wi, auth_state = MLX5_GET(tls_progress_params, ctx, auth_state); if (tracker_state != MLX5E_TLS_PROGRESS_PARAMS_RECORD_TRACKER_STATE_TRACKING || auth_state != MLX5E_TLS_PROGRESS_PARAMS_AUTH_STATE_NO_OFFLOAD) { - priv_rx->stats->tls_resync_req_skip++; + priv_rx->rq_stats->tls_resync_req_skip++; goto out; } hw_seq = MLX5_GET(tls_progress_params, ctx, hw_resync_tcp_sn); tls_offload_rx_resync_async_request_end(priv_rx->sk, cpu_to_be32(hw_seq)); - priv_rx->stats->tls_resync_req_end++; + priv_rx->rq_stats->tls_resync_req_end++; out: mlx5e_ktls_priv_rx_put(priv_rx); dma_unmap_single(dev, buf->dma_addr, PROGRESS_PARAMS_PADDED_SIZE, DMA_FROM_DEVICE); @@ -609,7 +610,8 @@ int mlx5e_ktls_add_rx(struct net_device *netdev, struct sock *sk, priv_rx->rxq = rxq; priv_rx->sk = sk; - priv_rx->stats = &priv->channel_stats[rxq].rq; + priv_rx->rq_stats = &priv->channel_stats[rxq].rq; + priv_rx->sw_stats = &priv->tls->sw_stats; mlx5e_set_ktls_rx_priv_ctx(tls_ctx, priv_rx); rqtn = priv->direct_tir[rxq].rqt.rqtn; @@ -630,7 +632,7 @@ int mlx5e_ktls_add_rx(struct net_device *netdev, struct sock *sk, if (err) goto err_post_wqes; - priv_rx->stats->tls_ctx++; + atomic64_inc(&priv_rx->sw_stats->rx_tls_ctx); return 0; @@ -666,7 +668,7 @@ void mlx5e_ktls_del_rx(struct net_device *netdev, struct tls_context *tls_ctx) if (cancel_work_sync(&resync->work)) mlx5e_ktls_priv_rx_put(priv_rx); - priv_rx->stats->tls_del++; + atomic64_inc(&priv_rx->sw_stats->rx_tls_del); if (priv_rx->rule.rule) mlx5e_accel_fs_del_sk(priv_rx->rule.rule); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls.h b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls.h index 5b408904df14..4c9274d390da 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls.h @@ -46,6 +46,8 @@ struct mlx5e_tls_sw_stats { atomic64_t tx_tls_drop_resync_alloc; atomic64_t tx_tls_drop_no_sync_data; atomic64_t tx_tls_drop_bypass_required; + atomic64_t rx_tls_ctx; + atomic64_t rx_tls_del; atomic64_t rx_tls_drop_resync_request; atomic64_t rx_tls_resync_request; atomic64_t rx_tls_resync_reply; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls_stats.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls_stats.c index a5aabc5c5236..29463bdb7715 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls_stats.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls_stats.c @@ -47,6 +47,8 @@ static const struct counter_desc mlx5e_tls_sw_stats_desc[] = { static const struct counter_desc mlx5e_ktls_sw_stats_desc[] = { { MLX5E_DECLARE_STAT(struct mlx5e_tls_sw_stats, tx_tls_ctx) }, + { MLX5E_DECLARE_STAT(struct mlx5e_tls_sw_stats, rx_tls_ctx) }, + { MLX5E_DECLARE_STAT(struct mlx5e_tls_sw_stats, rx_tls_del) }, }; #define MLX5E_READ_CTR_ATOMIC64(ptr, dsc, i) \ diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c index 74adaa58189a..88a01c59ce61 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c @@ -179,8 +179,6 @@ static const struct counter_desc sw_stats_desc[] = { #ifdef CONFIG_MLX5_EN_TLS { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_tls_decrypted_packets) }, { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_tls_decrypted_bytes) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_tls_ctx) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_tls_del) }, { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_tls_resync_req_pkt) }, { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_tls_resync_req_start) }, { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_tls_resync_req_end) }, @@ -341,8 +339,6 @@ static void mlx5e_stats_grp_sw_update_stats_rq_stats(struct mlx5e_sw_stats *s, #ifdef CONFIG_MLX5_EN_TLS s->rx_tls_decrypted_packets += rq_stats->tls_decrypted_packets; s->rx_tls_decrypted_bytes += rq_stats->tls_decrypted_bytes; - s->rx_tls_ctx += rq_stats->tls_ctx; - s->rx_tls_del += rq_stats->tls_del; s->rx_tls_resync_req_pkt += rq_stats->tls_resync_req_pkt; s->rx_tls_resync_req_start += rq_stats->tls_resync_req_start; s->rx_tls_resync_req_end += rq_stats->tls_resync_req_end; @@ -1620,8 +1616,6 @@ static const struct counter_desc rq_stats_desc[] = { #ifdef CONFIG_MLX5_EN_TLS { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, tls_decrypted_packets) }, { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, tls_decrypted_bytes) }, - { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, tls_ctx) }, - { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, tls_del) }, { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, tls_resync_req_pkt) }, { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, tls_resync_req_start) }, { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, tls_resync_req_end) }, diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h index 8eb056af79ba..adf9b7b8b712 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h @@ -201,8 +201,6 @@ struct mlx5e_sw_stats { u64 rx_tls_decrypted_packets; u64 rx_tls_decrypted_bytes; - u64 rx_tls_ctx; - u64 rx_tls_del; u64 rx_tls_resync_req_pkt; u64 rx_tls_resync_req_start; u64 rx_tls_resync_req_end; @@ -333,8 +331,6 @@ struct mlx5e_rq_stats { #ifdef CONFIG_MLX5_EN_TLS u64 tls_decrypted_packets; u64 tls_decrypted_bytes; - u64 tls_ctx; - u64 tls_del; u64 tls_resync_req_pkt; u64 tls_resync_req_start; u64 tls_resync_req_end; -- cgit v1.2.3 From a7b76002ae78cd230ee652ccdfedf21aa94fcecc Mon Sep 17 00:00:00 2001 From: Daniel Jurgens Date: Thu, 5 Dec 2019 16:58:10 -0600 Subject: net/mlx5: Don't request more than supported EQs Calculating the number of compeltion EQs based on the number of available IRQ vectors doesn't work now that all async EQs share one IRQ. Thus the max number of EQs can be exceeded on systems with more than approximately 256 CPUs. Take this into account when calculating the number of available completion EQs. Fixes: 81bfa206032a ("net/mlx5: Use a single IRQ for all async EQs") Signed-off-by: Daniel Jurgens Reviewed-by: Parav Pandit Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/eq.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eq.c b/drivers/net/ethernet/mellanox/mlx5/core/eq.c index 174dfbc996c6..1fa9c18563da 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eq.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eq.c @@ -931,13 +931,24 @@ void mlx5_core_eq_free_irqs(struct mlx5_core_dev *dev) mutex_unlock(&table->lock); } +#ifdef CONFIG_INFINIBAND_ON_DEMAND_PAGING +#define MLX5_MAX_ASYNC_EQS 4 +#else +#define MLX5_MAX_ASYNC_EQS 3 +#endif + int mlx5_eq_table_create(struct mlx5_core_dev *dev) { struct mlx5_eq_table *eq_table = dev->priv.eq_table; + int num_eqs = MLX5_CAP_GEN(dev, max_num_eqs) ? + MLX5_CAP_GEN(dev, max_num_eqs) : + 1 << MLX5_CAP_GEN(dev, log_max_eq); int err; eq_table->num_comp_eqs = - mlx5_irq_get_num_comp(eq_table->irq_table); + min_t(int, + mlx5_irq_get_num_comp(eq_table->irq_table), + num_eqs - MLX5_MAX_ASYNC_EQS); err = create_async_eqs(dev); if (err) { -- cgit v1.2.3 From 929a2faddd55290fbb0b73f453b200ed1b2b2947 Mon Sep 17 00:00:00 2001 From: Dima Chumak Date: Thu, 11 Feb 2021 09:36:33 +0200 Subject: net/mlx5e: Consider geneve_opts for encap contexts Current algorithm for encap keys is legacy from initial vxlan implementation and doesn't take into account all possible fields of a tunnel. For example, for a Geneve tunnel, which may have additional TLV options, they are ignored when comparing encap keys and a rule can be attached to an incorrect encap entry. Fix that by introducing encap_info_equal() operation in struct mlx5e_tc_tunnel. Geneve tunnel type uses custom implementation, which extends generic algorithm and considers options if they are set. Fixes: 7f1a546e3222 ("net/mlx5e: Consider tunnel type for encap contexts") Signed-off-by: Dima Chumak Reviewed-by: Vlad Buslov Signed-off-by: Saeed Mahameed --- .../net/ethernet/mellanox/mlx5/core/en/tc_tun.h | 10 ++++++++ .../ethernet/mellanox/mlx5/core/en/tc_tun_encap.c | 23 +++++++---------- .../ethernet/mellanox/mlx5/core/en/tc_tun_geneve.c | 29 ++++++++++++++++++++++ .../ethernet/mellanox/mlx5/core/en/tc_tun_gre.c | 1 + .../mellanox/mlx5/core/en/tc_tun_mplsoudp.c | 1 + .../ethernet/mellanox/mlx5/core/en/tc_tun_vxlan.c | 1 + 6 files changed, 51 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.h b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.h index 67de2bf36861..e1271998b937 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.h @@ -21,6 +21,11 @@ enum { MLX5E_TC_TUNNEL_TYPE_MPLSOUDP, }; +struct mlx5e_encap_key { + const struct ip_tunnel_key *ip_tun_key; + struct mlx5e_tc_tunnel *tc_tunnel; +}; + struct mlx5e_tc_tunnel { int tunnel_type; enum mlx5_flow_match_level match_level; @@ -44,6 +49,8 @@ struct mlx5e_tc_tunnel { struct flow_cls_offload *f, void *headers_c, void *headers_v); + bool (*encap_info_equal)(struct mlx5e_encap_key *a, + struct mlx5e_encap_key *b); }; extern struct mlx5e_tc_tunnel vxlan_tunnel; @@ -101,6 +108,9 @@ int mlx5e_tc_tun_parse_udp_ports(struct mlx5e_priv *priv, void *headers_c, void *headers_v); +bool mlx5e_tc_tun_encap_info_equal_generic(struct mlx5e_encap_key *a, + struct mlx5e_encap_key *b); + #endif /* CONFIG_MLX5_ESWITCH */ #endif //__MLX5_EN_TC_TUNNEL_H__ diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c index 7f7b0f6dcdf9..9f16ad2c0710 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c @@ -476,16 +476,11 @@ void mlx5e_detach_decap(struct mlx5e_priv *priv, mlx5e_decap_dealloc(priv, d); } -struct encap_key { - const struct ip_tunnel_key *ip_tun_key; - struct mlx5e_tc_tunnel *tc_tunnel; -}; - -static int cmp_encap_info(struct encap_key *a, - struct encap_key *b) +bool mlx5e_tc_tun_encap_info_equal_generic(struct mlx5e_encap_key *a, + struct mlx5e_encap_key *b) { - return memcmp(a->ip_tun_key, b->ip_tun_key, sizeof(*a->ip_tun_key)) || - a->tc_tunnel->tunnel_type != b->tc_tunnel->tunnel_type; + return memcmp(a->ip_tun_key, b->ip_tun_key, sizeof(*a->ip_tun_key)) == 0 && + a->tc_tunnel->tunnel_type == b->tc_tunnel->tunnel_type; } static int cmp_decap_info(struct mlx5e_decap_key *a, @@ -494,7 +489,7 @@ static int cmp_decap_info(struct mlx5e_decap_key *a, return memcmp(&a->key, &b->key, sizeof(b->key)); } -static int hash_encap_info(struct encap_key *key) +static int hash_encap_info(struct mlx5e_encap_key *key) { return jhash(key->ip_tun_key, sizeof(*key->ip_tun_key), key->tc_tunnel->tunnel_type); @@ -516,18 +511,18 @@ static bool mlx5e_decap_take(struct mlx5e_decap_entry *e) } static struct mlx5e_encap_entry * -mlx5e_encap_get(struct mlx5e_priv *priv, struct encap_key *key, +mlx5e_encap_get(struct mlx5e_priv *priv, struct mlx5e_encap_key *key, uintptr_t hash_key) { struct mlx5_eswitch *esw = priv->mdev->priv.eswitch; + struct mlx5e_encap_key e_key; struct mlx5e_encap_entry *e; - struct encap_key e_key; hash_for_each_possible_rcu(esw->offloads.encap_tbl, e, encap_hlist, hash_key) { e_key.ip_tun_key = &e->tun_info->key; e_key.tc_tunnel = e->tunnel; - if (!cmp_encap_info(&e_key, key) && + if (e->tunnel->encap_info_equal(&e_key, key) && mlx5e_encap_take(e)) return e; } @@ -694,8 +689,8 @@ int mlx5e_attach_encap(struct mlx5e_priv *priv, struct mlx5_flow_attr *attr = flow->attr; const struct ip_tunnel_info *tun_info; unsigned long tbl_time_before = 0; - struct encap_key key; struct mlx5e_encap_entry *e; + struct mlx5e_encap_key key; bool entry_created = false; unsigned short family; uintptr_t hash_key; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_geneve.c b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_geneve.c index 7ed3f9f79f11..f5b26f5a7de4 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_geneve.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_geneve.c @@ -329,6 +329,34 @@ static int mlx5e_tc_tun_parse_geneve(struct mlx5e_priv *priv, return mlx5e_tc_tun_parse_geneve_options(priv, spec, f); } +static bool mlx5e_tc_tun_encap_info_equal_geneve(struct mlx5e_encap_key *a, + struct mlx5e_encap_key *b) +{ + struct ip_tunnel_info *a_info; + struct ip_tunnel_info *b_info; + bool a_has_opts, b_has_opts; + + if (!mlx5e_tc_tun_encap_info_equal_generic(a, b)) + return false; + + a_has_opts = !!(a->ip_tun_key->tun_flags & TUNNEL_GENEVE_OPT); + b_has_opts = !!(b->ip_tun_key->tun_flags & TUNNEL_GENEVE_OPT); + + /* keys are equal when both don't have any options attached */ + if (!a_has_opts && !b_has_opts) + return true; + + if (a_has_opts != b_has_opts) + return false; + + /* geneve options stored in memory next to ip_tunnel_info struct */ + a_info = container_of(a->ip_tun_key, struct ip_tunnel_info, key); + b_info = container_of(b->ip_tun_key, struct ip_tunnel_info, key); + + return a_info->options_len == b_info->options_len && + memcmp(a_info + 1, b_info + 1, a_info->options_len) == 0; +} + struct mlx5e_tc_tunnel geneve_tunnel = { .tunnel_type = MLX5E_TC_TUNNEL_TYPE_GENEVE, .match_level = MLX5_MATCH_L4, @@ -338,4 +366,5 @@ struct mlx5e_tc_tunnel geneve_tunnel = { .generate_ip_tun_hdr = mlx5e_gen_ip_tunnel_header_geneve, .parse_udp_ports = mlx5e_tc_tun_parse_udp_ports_geneve, .parse_tunnel = mlx5e_tc_tun_parse_geneve, + .encap_info_equal = mlx5e_tc_tun_encap_info_equal_geneve, }; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_gre.c b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_gre.c index 2805416c32a3..ada14f0574dc 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_gre.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_gre.c @@ -94,4 +94,5 @@ struct mlx5e_tc_tunnel gre_tunnel = { .generate_ip_tun_hdr = mlx5e_gen_ip_tunnel_header_gretap, .parse_udp_ports = NULL, .parse_tunnel = mlx5e_tc_tun_parse_gretap, + .encap_info_equal = mlx5e_tc_tun_encap_info_equal_generic, }; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_mplsoudp.c b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_mplsoudp.c index 3479672e84cf..60952b33b568 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_mplsoudp.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_mplsoudp.c @@ -131,4 +131,5 @@ struct mlx5e_tc_tunnel mplsoudp_tunnel = { .generate_ip_tun_hdr = generate_ip_tun_hdr, .parse_udp_ports = parse_udp_ports, .parse_tunnel = parse_tunnel, + .encap_info_equal = mlx5e_tc_tun_encap_info_equal_generic, }; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_vxlan.c b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_vxlan.c index 038a0f1cecec..4267f3a1059e 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_vxlan.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_vxlan.c @@ -150,4 +150,5 @@ struct mlx5e_tc_tunnel vxlan_tunnel = { .generate_ip_tun_hdr = mlx5e_gen_ip_tunnel_header_vxlan, .parse_udp_ports = mlx5e_tc_tun_parse_udp_ports_vxlan, .parse_tunnel = mlx5e_tc_tun_parse_vxlan, + .encap_info_equal = mlx5e_tc_tun_encap_info_equal_generic, }; -- cgit v1.2.3 From 3ff3874fa0b261ef74f2bfb008a82ab1601c11eb Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Wed, 10 Feb 2021 14:58:01 +0200 Subject: net/mlx5e: Guarantee room for XSK wakeup NOP on async ICOSQ XSK wakeup flow triggers an IRQ by posting a NOP WQE and hitting the doorbell on the async ICOSQ. It maintains its state so that it doesn't issue another NOP WQE if it has an outstanding one already. For this flow to work properly, the NOP post must not fail. Make sure to reserve room for the NOP WQE in all WQE posts to the async ICOSQ. Fixes: 8d94b590f1e4 ("net/mlx5e: Turn XSK ICOSQ into a general asynchronous one") Fixes: 1182f3659357 ("net/mlx5e: kTLS, Add kTLS RX HW offload support") Fixes: 0419d8c9d8f8 ("net/mlx5e: kTLS, Add kTLS RX resync support") Signed-off-by: Tariq Toukan Reviewed-by: Maxim Mikityanskiy Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en.h | 1 + drivers/net/ethernet/mellanox/mlx5/core/en/txrx.h | 6 ++++++ .../ethernet/mellanox/mlx5/core/en_accel/ktls_rx.c | 18 +++++++----------- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 21 ++++++++++++++++++++- 4 files changed, 34 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h index 304b296fe8b9..bc6f77ea0a31 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h @@ -516,6 +516,7 @@ struct mlx5e_icosq { struct mlx5_wq_cyc wq; void __iomem *uar_map; u32 sqn; + u16 reserved_room; unsigned long state; /* control path */ diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/txrx.h b/drivers/net/ethernet/mellanox/mlx5/core/en/txrx.h index 2371b83dad9c..055c3bc23733 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/txrx.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/txrx.h @@ -441,4 +441,10 @@ static inline u16 mlx5e_stop_room_for_wqe(u16 wqe_size) return wqe_size * 2 - 1; } +static inline bool mlx5e_icosq_can_post_wqe(struct mlx5e_icosq *sq, u16 wqe_size) +{ + u16 room = sq->reserved_room + mlx5e_stop_room_for_wqe(wqe_size); + + return mlx5e_wqc_has_room_for(&sq->wq, sq->cc, sq->pc, room); +} #endif diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_rx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_rx.c index 57c5ebd597a7..19d22a63313f 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_rx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_rx.c @@ -138,11 +138,10 @@ post_static_params(struct mlx5e_icosq *sq, { struct mlx5e_set_tls_static_params_wqe *wqe; struct mlx5e_icosq_wqe_info wi; - u16 pi, num_wqebbs, room; + u16 pi, num_wqebbs; num_wqebbs = MLX5E_TLS_SET_STATIC_PARAMS_WQEBBS; - room = mlx5e_stop_room_for_wqe(num_wqebbs); - if (unlikely(!mlx5e_wqc_has_room_for(&sq->wq, sq->cc, sq->pc, room))) + if (unlikely(!mlx5e_icosq_can_post_wqe(sq, num_wqebbs))) return ERR_PTR(-ENOSPC); pi = mlx5e_icosq_get_next_pi(sq, num_wqebbs); @@ -169,11 +168,10 @@ post_progress_params(struct mlx5e_icosq *sq, { struct mlx5e_set_tls_progress_params_wqe *wqe; struct mlx5e_icosq_wqe_info wi; - u16 pi, num_wqebbs, room; + u16 pi, num_wqebbs; num_wqebbs = MLX5E_TLS_SET_PROGRESS_PARAMS_WQEBBS; - room = mlx5e_stop_room_for_wqe(num_wqebbs); - if (unlikely(!mlx5e_wqc_has_room_for(&sq->wq, sq->cc, sq->pc, room))) + if (unlikely(!mlx5e_icosq_can_post_wqe(sq, num_wqebbs))) return ERR_PTR(-ENOSPC); pi = mlx5e_icosq_get_next_pi(sq, num_wqebbs); @@ -278,17 +276,15 @@ resync_post_get_progress_params(struct mlx5e_icosq *sq, buf->priv_rx = priv_rx; - BUILD_BUG_ON(MLX5E_KTLS_GET_PROGRESS_WQEBBS != 1); - spin_lock_bh(&sq->channel->async_icosq_lock); - if (unlikely(!mlx5e_wqc_has_room_for(&sq->wq, sq->cc, sq->pc, 1))) { + if (unlikely(!mlx5e_icosq_can_post_wqe(sq, MLX5E_KTLS_GET_PROGRESS_WQEBBS))) { spin_unlock_bh(&sq->channel->async_icosq_lock); err = -ENOSPC; goto err_dma_unmap; } - pi = mlx5e_icosq_get_next_pi(sq, 1); + pi = mlx5e_icosq_get_next_pi(sq, MLX5E_KTLS_GET_PROGRESS_WQEBBS); wqe = MLX5E_TLS_FETCH_GET_PROGRESS_PARAMS_WQE(sq, pi); #define GET_PSV_DS_CNT (DIV_ROUND_UP(sizeof(*wqe), MLX5_SEND_WQE_DS)) @@ -308,7 +304,7 @@ resync_post_get_progress_params(struct mlx5e_icosq *sq, wi = (struct mlx5e_icosq_wqe_info) { .wqe_type = MLX5E_ICOSQ_WQE_GET_PSV_TLS, - .num_wqebbs = 1, + .num_wqebbs = MLX5E_KTLS_GET_PROGRESS_WQEBBS, .tls_get_params.buf = buf, }; icosq_fill_wi(sq, pi, &wi); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 158f947a8503..5db63b9f3b70 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -1091,6 +1091,7 @@ static int mlx5e_alloc_icosq(struct mlx5e_channel *c, sq->channel = c; sq->uar_map = mdev->mlx5e_res.bfreg.map; + sq->reserved_room = param->stop_room; param->wq.db_numa_node = cpu_to_node(c->cpu); err = mlx5_wq_cyc_create(mdev, ¶m->wq, sqc_wq, wq, &sq->wq_ctrl); @@ -2350,6 +2351,24 @@ void mlx5e_build_icosq_param(struct mlx5e_priv *priv, mlx5e_build_ico_cq_param(priv, log_wq_size, ¶m->cqp); } +static void mlx5e_build_async_icosq_param(struct mlx5e_priv *priv, + struct mlx5e_params *params, + u8 log_wq_size, + struct mlx5e_sq_param *param) +{ + void *sqc = param->sqc; + void *wq = MLX5_ADDR_OF(sqc, sqc, wq); + + mlx5e_build_sq_param_common(priv, param); + + /* async_icosq is used by XSK only if xdp_prog is active */ + if (params->xdp_prog) + param->stop_room = mlx5e_stop_room_for_wqe(1); /* for XSK NOP */ + MLX5_SET(sqc, sqc, reg_umr, MLX5_CAP_ETH(priv->mdev, reg_umr_sq)); + MLX5_SET(wq, wq, log_wq_sz, log_wq_size); + mlx5e_build_ico_cq_param(priv, log_wq_size, ¶m->cqp); +} + void mlx5e_build_xdpsq_param(struct mlx5e_priv *priv, struct mlx5e_params *params, struct mlx5e_sq_param *param) @@ -2398,7 +2417,7 @@ static void mlx5e_build_channel_param(struct mlx5e_priv *priv, mlx5e_build_sq_param(priv, params, &cparam->txq_sq); mlx5e_build_xdpsq_param(priv, params, &cparam->xdp_sq); mlx5e_build_icosq_param(priv, icosq_log_wq_sz, &cparam->icosq); - mlx5e_build_icosq_param(priv, async_icosq_log_wq_sz, &cparam->async_icosq); + mlx5e_build_async_icosq_param(priv, params, async_icosq_log_wq_sz, &cparam->async_icosq); } int mlx5e_open_channels(struct mlx5e_priv *priv, -- cgit v1.2.3 From e92049ae4548ba09e53eaa9c8f6964b07ea274c9 Mon Sep 17 00:00:00 2001 From: Qu Huang Date: Thu, 28 Jan 2021 20:14:25 +0800 Subject: drm/amdkfd: dqm fence memory corruption Amdgpu driver uses 4-byte data type as DQM fence memory, and transmits GPU address of fence memory to microcode through query status PM4 message. However, query status PM4 message definition and microcode processing are all processed according to 8 bytes. Fence memory only allocates 4 bytes of memory, but microcode does write 8 bytes of memory, so there is a memory corruption. Changes since v1: * Change dqm->fence_addr as a u64 pointer to fix this issue, also fix up query_status and amdkfd_fence_wait_timeout function uses 64 bit fence value to make them consistent. Signed-off-by: Qu Huang Reviewed-by: Felix Kuehling Signed-off-by: Felix Kuehling Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdkfd/kfd_dbgdev.c | 2 +- drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c | 6 +++--- drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h | 2 +- drivers/gpu/drm/amd/amdkfd/kfd_packet_manager.c | 2 +- drivers/gpu/drm/amd/amdkfd/kfd_packet_manager_v9.c | 2 +- drivers/gpu/drm/amd/amdkfd/kfd_packet_manager_vi.c | 2 +- drivers/gpu/drm/amd/amdkfd/kfd_priv.h | 8 ++++---- 7 files changed, 12 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_dbgdev.c b/drivers/gpu/drm/amd/amdkfd/kfd_dbgdev.c index b258a3dae767..159add0f5aaa 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_dbgdev.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_dbgdev.c @@ -155,7 +155,7 @@ static int dbgdev_diq_submit_ib(struct kfd_dbgdev *dbgdev, /* Wait till CP writes sync code: */ status = amdkfd_fence_wait_timeout( - (unsigned int *) rm_state, + rm_state, QUEUESTATE__ACTIVE, 1500); kfd_gtt_sa_free(dbgdev->dev, mem_obj); diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c index e686ce2bf3b3..4598a9a58125 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c @@ -1167,7 +1167,7 @@ static int start_cpsch(struct device_queue_manager *dqm) if (retval) goto fail_allocate_vidmem; - dqm->fence_addr = dqm->fence_mem->cpu_ptr; + dqm->fence_addr = (uint64_t *)dqm->fence_mem->cpu_ptr; dqm->fence_gpu_addr = dqm->fence_mem->gpu_addr; init_interrupts(dqm); @@ -1340,8 +1340,8 @@ out: return retval; } -int amdkfd_fence_wait_timeout(unsigned int *fence_addr, - unsigned int fence_value, +int amdkfd_fence_wait_timeout(uint64_t *fence_addr, + uint64_t fence_value, unsigned int timeout_ms) { unsigned long end_jiffies = msecs_to_jiffies(timeout_ms) + jiffies; diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h index 7351dd195274..45f815946554 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h +++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h @@ -192,7 +192,7 @@ struct device_queue_manager { uint16_t vmid_pasid[VMID_NUM]; uint64_t pipelines_addr; uint64_t fence_gpu_addr; - unsigned int *fence_addr; + uint64_t *fence_addr; struct kfd_mem_obj *fence_mem; bool active_runlist; int sched_policy; diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_packet_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_packet_manager.c index 5d541e0cc8ca..f71a7fa6680c 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_packet_manager.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_packet_manager.c @@ -347,7 +347,7 @@ fail_create_runlist_ib: } int pm_send_query_status(struct packet_manager *pm, uint64_t fence_address, - uint32_t fence_value) + uint64_t fence_value) { uint32_t *buffer, size; int retval = 0; diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_packet_manager_v9.c b/drivers/gpu/drm/amd/amdkfd/kfd_packet_manager_v9.c index dfaf771a42e6..e3ba0cd3b6fa 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_packet_manager_v9.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_packet_manager_v9.c @@ -283,7 +283,7 @@ static int pm_unmap_queues_v9(struct packet_manager *pm, uint32_t *buffer, } static int pm_query_status_v9(struct packet_manager *pm, uint32_t *buffer, - uint64_t fence_address, uint32_t fence_value) + uint64_t fence_address, uint64_t fence_value) { struct pm4_mes_query_status *packet; diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_packet_manager_vi.c b/drivers/gpu/drm/amd/amdkfd/kfd_packet_manager_vi.c index a852e0d7d804..08442e7d9944 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_packet_manager_vi.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_packet_manager_vi.c @@ -263,7 +263,7 @@ static int pm_unmap_queues_vi(struct packet_manager *pm, uint32_t *buffer, } static int pm_query_status_vi(struct packet_manager *pm, uint32_t *buffer, - uint64_t fence_address, uint32_t fence_value) + uint64_t fence_address, uint64_t fence_value) { struct pm4_mes_query_status *packet; diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_priv.h b/drivers/gpu/drm/amd/amdkfd/kfd_priv.h index 09599efa41fc..f304d1f8df5f 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_priv.h +++ b/drivers/gpu/drm/amd/amdkfd/kfd_priv.h @@ -1003,8 +1003,8 @@ int pqm_get_wave_state(struct process_queue_manager *pqm, u32 *ctl_stack_used_size, u32 *save_area_used_size); -int amdkfd_fence_wait_timeout(unsigned int *fence_addr, - unsigned int fence_value, +int amdkfd_fence_wait_timeout(uint64_t *fence_addr, + uint64_t fence_value, unsigned int timeout_ms); /* Packet Manager */ @@ -1040,7 +1040,7 @@ struct packet_manager_funcs { uint32_t filter_param, bool reset, unsigned int sdma_engine); int (*query_status)(struct packet_manager *pm, uint32_t *buffer, - uint64_t fence_address, uint32_t fence_value); + uint64_t fence_address, uint64_t fence_value); int (*release_mem)(uint64_t gpu_addr, uint32_t *buffer); /* Packet sizes */ @@ -1062,7 +1062,7 @@ int pm_send_set_resources(struct packet_manager *pm, struct scheduling_resources *res); int pm_send_runlist(struct packet_manager *pm, struct list_head *dqm_queues); int pm_send_query_status(struct packet_manager *pm, uint64_t fence_address, - uint32_t fence_value); + uint64_t fence_value); int pm_send_unmap_queue(struct packet_manager *pm, enum kfd_queue_type type, enum kfd_unmap_queues_filter mode, -- cgit v1.2.3 From 6951c3e4a260f65a16433833d2511e8796dc8625 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 26 Mar 2021 16:56:07 -0400 Subject: drm/amdgpu/vangogh: don't check for dpm in is_dpm_running when in suspend Do the same thing we do for Renoir. We can check, but since the sbios has started DPM, it will always return true which causes the driver to skip some of the SMU init when it shouldn't. Reviewed-by: Zhan Liu Acked-by: Evan Quan Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c index 7ddbaecb11c2..101eaa20db9b 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c @@ -384,10 +384,15 @@ static int vangogh_dpm_set_jpeg_enable(struct smu_context *smu, bool enable) static bool vangogh_is_dpm_running(struct smu_context *smu) { + struct amdgpu_device *adev = smu->adev; int ret = 0; uint32_t feature_mask[2]; uint64_t feature_enabled; + /* we need to re-init after suspend so return false */ + if (adev->in_suspend) + return false; + ret = smu_cmn_get_enabled_32_bits_mask(smu, feature_mask, 2); if (ret) -- cgit v1.2.3 From 566c6e25f957ebdb0b6e8073ee291049118f47fb Mon Sep 17 00:00:00 2001 From: Huacai Chen Date: Tue, 30 Mar 2021 23:33:33 +0800 Subject: drm/amdgpu: Set a suitable dev_info.gart_page_size MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In Mesa, dev_info.gart_page_size is used for alignment and it was set to AMDGPU_GPU_PAGE_SIZE(4KB). However, the page table of AMDGPU driver requires an alignment on CPU pages. So, for non-4KB page system, gart_page_size should be max_t(u32, PAGE_SIZE, AMDGPU_GPU_PAGE_SIZE). Signed-off-by: Rui Wang Signed-off-by: Huacai Chen Link: https://github.com/loongson-community/linux-stable/commit/caa9c0a1 [Xi: rebased for drm-next, use max_t for checkpatch, and reworded commit message.] Signed-off-by: Xi Ruoyao BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1549 Tested-by: Dan Horák Reviewed-by: Christian König Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c index 64beb3399604..a4e2cf7cada1 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c @@ -778,9 +778,9 @@ int amdgpu_info_ioctl(struct drm_device *dev, void *data, struct drm_file *filp) dev_info->high_va_offset = AMDGPU_GMC_HOLE_END; dev_info->high_va_max = AMDGPU_GMC_HOLE_END | vm_size; } - dev_info->virtual_address_alignment = max((int)PAGE_SIZE, AMDGPU_GPU_PAGE_SIZE); + dev_info->virtual_address_alignment = max_t(u32, PAGE_SIZE, AMDGPU_GPU_PAGE_SIZE); dev_info->pte_fragment_size = (1 << adev->vm_manager.fragment_size) * AMDGPU_GPU_PAGE_SIZE; - dev_info->gart_page_size = AMDGPU_GPU_PAGE_SIZE; + dev_info->gart_page_size = max_t(u32, PAGE_SIZE, AMDGPU_GPU_PAGE_SIZE); dev_info->cu_active_number = adev->gfx.cu_info.number; dev_info->cu_ao_mask = adev->gfx.cu_info.ao_cu_mask; dev_info->ce_ram_size = adev->gfx.ce_ram_size; -- cgit v1.2.3 From e3512fb67093fabdf27af303066627b921ee9bd8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?X=E2=84=B9=20Ruoyao?= Date: Tue, 30 Mar 2021 23:33:34 +0800 Subject: drm/amdgpu: check alignment on CPU page for bo map MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The page table of AMDGPU requires an alignment to CPU page so we should check ioctl parameters for it. Return -EINVAL if some parameter is unaligned to CPU page, instead of corrupt the page table sliently. Reviewed-by: Christian König Signed-off-by: Xi Ruoyao Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c index 10de2cf344d5..7d2c8b169827 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c @@ -2197,8 +2197,8 @@ int amdgpu_vm_bo_map(struct amdgpu_device *adev, uint64_t eaddr; /* validate the parameters */ - if (saddr & AMDGPU_GPU_PAGE_MASK || offset & AMDGPU_GPU_PAGE_MASK || - size == 0 || size & AMDGPU_GPU_PAGE_MASK) + if (saddr & ~PAGE_MASK || offset & ~PAGE_MASK || + size == 0 || size & ~PAGE_MASK) return -EINVAL; /* make sure object fit at this offset */ @@ -2263,8 +2263,8 @@ int amdgpu_vm_bo_replace_map(struct amdgpu_device *adev, int r; /* validate the parameters */ - if (saddr & AMDGPU_GPU_PAGE_MASK || offset & AMDGPU_GPU_PAGE_MASK || - size == 0 || size & AMDGPU_GPU_PAGE_MASK) + if (saddr & ~PAGE_MASK || offset & ~PAGE_MASK || + size == 0 || size & ~PAGE_MASK) return -EINVAL; /* make sure object fit at this offset */ -- cgit v1.2.3 From 8cdddd182bd7befae6af49c5fd612893f55d6ccb Mon Sep 17 00:00:00 2001 From: Vitaly Kuznetsov Date: Wed, 24 Mar 2021 16:22:19 +0100 Subject: ACPI: processor: Fix CPU0 wakeup in acpi_idle_play_dead() Commit 496121c02127 ("ACPI: processor: idle: Allow probing on platforms with one ACPI C-state") broke CPU0 hotplug on certain systems, e.g. I'm observing the following on AWS Nitro (e.g r5b.xlarge but other instance types are affected as well): # echo 0 > /sys/devices/system/cpu/cpu0/online # echo 1 > /sys/devices/system/cpu/cpu0/online <10 seconds delay> -bash: echo: write error: Input/output error In fact, the above mentioned commit only revealed the problem and did not introduce it. On x86, to wakeup CPU an NMI is being used and hlt_play_dead()/mwait_play_dead() loops are prepared to handle it: /* * If NMI wants to wake up CPU0, start CPU0. */ if (wakeup_cpu0()) start_cpu0(); cpuidle_play_dead() -> acpi_idle_play_dead() (which is now being called on systems where it wasn't called before the above mentioned commit) serves the same purpose but it doesn't have a path for CPU0. What happens now on wakeup is: - NMI is sent to CPU0 - wakeup_cpu0_nmi() works as expected - we get back to while (1) loop in acpi_idle_play_dead() - safe_halt() puts CPU0 to sleep again. The straightforward/minimal fix is add the special handling for CPU0 on x86 and that's what the patch is doing. Fixes: 496121c02127 ("ACPI: processor: idle: Allow probing on platforms with one ACPI C-state") Signed-off-by: Vitaly Kuznetsov Cc: 5.10+ # 5.10+ Signed-off-by: Rafael J. Wysocki --- drivers/acpi/processor_idle.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index d93e400940a3..768a6b4d2368 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -29,6 +29,7 @@ */ #ifdef CONFIG_X86 #include +#include #endif #define _COMPONENT ACPI_PROCESSOR_COMPONENT @@ -541,6 +542,12 @@ static int acpi_idle_play_dead(struct cpuidle_device *dev, int index) wait_for_freeze(); } else return -ENODEV; + +#if defined(CONFIG_X86) && defined(CONFIG_HOTPLUG_CPU) + /* If NMI wants to wake up CPU0, start CPU0. */ + if (wakeup_cpu0()) + start_cpu0(); +#endif } /* Never reached */ -- cgit v1.2.3 From de3510e52b0a398261271455562458003b8eea62 Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Thu, 1 Apr 2021 07:52:44 +0900 Subject: null_blk: fix command timeout completion handling Memory backed or zoned null block devices may generate actual request timeout errors due to the submission path being blocked on memory allocation or zone locking. Unlike fake timeouts or injected timeouts, the request submission path will call blk_mq_complete_request() or blk_mq_end_request() for these real timeout errors, causing a double completion and use after free situation as the block layer timeout handler executes blk_mq_rq_timed_out() and __blk_mq_free_request() in blk_mq_check_expired(). This problem often triggers a NULL pointer dereference such as: BUG: kernel NULL pointer dereference, address: 0000000000000050 RIP: 0010:blk_mq_sched_mark_restart_hctx+0x5/0x20 ... Call Trace: dd_finish_request+0x56/0x80 blk_mq_free_request+0x37/0x130 null_handle_cmd+0xbf/0x250 [null_blk] ? null_queue_rq+0x67/0xd0 [null_blk] blk_mq_dispatch_rq_list+0x122/0x850 __blk_mq_do_dispatch_sched+0xbb/0x2c0 __blk_mq_sched_dispatch_requests+0x13d/0x190 blk_mq_sched_dispatch_requests+0x30/0x60 __blk_mq_run_hw_queue+0x49/0x90 process_one_work+0x26c/0x580 worker_thread+0x55/0x3c0 ? process_one_work+0x580/0x580 kthread+0x134/0x150 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x1f/0x30 This problem very often triggers when running the full btrfs xfstests on a memory-backed zoned null block device in a VM with limited amount of memory. Avoid this by executing blk_mq_complete_request() in null_timeout_rq() only for commands that are marked for a fake timeout completion using the fake_timeout boolean in struct null_cmd. For timeout errors injected through debugfs, the timeout handler will execute blk_mq_complete_request()i as before. This is safe as the submission path does not execute complete requests in this case. In null_timeout_rq(), also make sure to set the command error field to BLK_STS_TIMEOUT and to propagate this error through to the request completion. Reported-by: Johannes Thumshirn Signed-off-by: Damien Le Moal Tested-by: Johannes Thumshirn Reviewed-by: Johannes Thumshirn Link: https://lore.kernel.org/r/20210331225244.126426-1-damien.lemoal@wdc.com Signed-off-by: Jens Axboe --- drivers/block/null_blk/main.c | 26 +++++++++++++++++++++----- drivers/block/null_blk/null_blk.h | 1 + 2 files changed, 22 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/block/null_blk/main.c b/drivers/block/null_blk/main.c index d6c821d48090..51bfd7737552 100644 --- a/drivers/block/null_blk/main.c +++ b/drivers/block/null_blk/main.c @@ -1369,10 +1369,13 @@ static blk_status_t null_handle_cmd(struct nullb_cmd *cmd, sector_t sector, } if (dev->zoned) - cmd->error = null_process_zoned_cmd(cmd, op, - sector, nr_sectors); + sts = null_process_zoned_cmd(cmd, op, sector, nr_sectors); else - cmd->error = null_process_cmd(cmd, op, sector, nr_sectors); + sts = null_process_cmd(cmd, op, sector, nr_sectors); + + /* Do not overwrite errors (e.g. timeout errors) */ + if (cmd->error == BLK_STS_OK) + cmd->error = sts; out: nullb_complete_cmd(cmd); @@ -1451,8 +1454,20 @@ static bool should_requeue_request(struct request *rq) static enum blk_eh_timer_return null_timeout_rq(struct request *rq, bool res) { + struct nullb_cmd *cmd = blk_mq_rq_to_pdu(rq); + pr_info("rq %p timed out\n", rq); - blk_mq_complete_request(rq); + + /* + * If the device is marked as blocking (i.e. memory backed or zoned + * device), the submission path may be blocked waiting for resources + * and cause real timeouts. For these real timeouts, the submission + * path will complete the request using blk_mq_complete_request(). + * Only fake timeouts need to execute blk_mq_complete_request() here. + */ + cmd->error = BLK_STS_TIMEOUT; + if (cmd->fake_timeout) + blk_mq_complete_request(rq); return BLK_EH_DONE; } @@ -1473,6 +1488,7 @@ static blk_status_t null_queue_rq(struct blk_mq_hw_ctx *hctx, cmd->rq = bd->rq; cmd->error = BLK_STS_OK; cmd->nq = nq; + cmd->fake_timeout = should_timeout_request(bd->rq); blk_mq_start_request(bd->rq); @@ -1489,7 +1505,7 @@ static blk_status_t null_queue_rq(struct blk_mq_hw_ctx *hctx, return BLK_STS_OK; } } - if (should_timeout_request(bd->rq)) + if (cmd->fake_timeout) return BLK_STS_OK; return null_handle_cmd(cmd, sector, nr_sectors, req_op(bd->rq)); diff --git a/drivers/block/null_blk/null_blk.h b/drivers/block/null_blk/null_blk.h index 83504f3cc9d6..4876d5adb12d 100644 --- a/drivers/block/null_blk/null_blk.h +++ b/drivers/block/null_blk/null_blk.h @@ -22,6 +22,7 @@ struct nullb_cmd { blk_status_t error; struct nullb_queue *nq; struct hrtimer timer; + bool fake_timeout; }; struct nullb_queue { -- cgit v1.2.3 From 040f31196e8b2609613f399793b9225271b79471 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 23 Mar 2021 14:15:23 +0100 Subject: soc/fsl: qbman: fix conflicting alignment attributes When building with W=1, gcc points out that the __packed attribute on struct qm_eqcr_entry conflicts with the 8-byte alignment attribute on struct qm_fd inside it: drivers/soc/fsl/qbman/qman.c:189:1: error: alignment 1 of 'struct qm_eqcr_entry' is less than 8 [-Werror=packed-not-aligned] I assume that the alignment attribute is the correct one, and that qm_eqcr_entry cannot actually be unaligned in memory, so add the same alignment on the outer struct. Fixes: c535e923bb97 ("soc/fsl: Introduce DPAA 1.x QMan device driver") Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20210323131530.2619900-1-arnd@kernel.org' Signed-off-by: Arnd Bergmann --- drivers/soc/fsl/qbman/qman.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/soc/fsl/qbman/qman.c b/drivers/soc/fsl/qbman/qman.c index a1b9be1d105a..fde4edd83c14 100644 --- a/drivers/soc/fsl/qbman/qman.c +++ b/drivers/soc/fsl/qbman/qman.c @@ -186,7 +186,7 @@ struct qm_eqcr_entry { __be32 tag; struct qm_fd fd; u8 __reserved3[32]; -} __packed; +} __packed __aligned(8); #define QM_EQCR_VERB_VBIT 0x80 #define QM_EQCR_VERB_CMD_MASK 0x61 /* but only one value; */ #define QM_EQCR_VERB_CMD_ENQUEUE 0x01 -- cgit v1.2.3 From a2fa9e57a68cd108777ded8f0443483a5fa179ed Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 23 Mar 2021 14:19:42 +0100 Subject: ARM: mvebu: avoid clang -Wtautological-constant warning Clang warns about the comparison when using a 32-bit phys_addr_t: drivers/bus/mvebu-mbus.c:621:17: error: result of comparison of constant 4294967296 with expression of type 'phys_addr_t' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare] if (reg_start >= 0x100000000ULL) Add a cast to shut up the warning. Signed-off-by: Arnd Bergmann Reviewed-by: Nathan Chancellor Link: https://lore.kernel.org/r/20210323131952.2835509-1-arnd@kernel.org' Signed-off-by: Arnd Bergmann --- drivers/bus/mvebu-mbus.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/bus/mvebu-mbus.c b/drivers/bus/mvebu-mbus.c index dd9e7343a5e3..ea0424922de7 100644 --- a/drivers/bus/mvebu-mbus.c +++ b/drivers/bus/mvebu-mbus.c @@ -618,7 +618,7 @@ mvebu_mbus_find_bridge_hole(uint64_t *start, uint64_t *end) * This part of the memory is above 4 GB, so we don't * care for the MBus bridge hole. */ - if (reg_start >= 0x100000000ULL) + if ((u64)reg_start >= 0x100000000ULL) continue; /* -- cgit v1.2.3 From 7a75a8412fdd52a64ee860bd9708d16b1b2aa77a Mon Sep 17 00:00:00 2001 From: Arkadiusz Kubalewski Date: Wed, 17 Feb 2021 20:21:19 +0000 Subject: i40e: Fix inconsistent indenting Fixed new static analysis findings: "warn: inconsistent indenting" - introduced lately, reported with lkp and smatch build. Fixes: 4b208eaa8078 ("i40e: Add init and default config of software based DCB") Reported-by: kernel test robot Signed-off-by: Aleksandr Loktionov Signed-off-by: Arkadiusz Kubalewski Tested-by: Dave Switzer Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/i40e/i40e_main.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index f67f0cc9dadf..af6c25fa493c 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -6738,9 +6738,9 @@ out: set_bit(__I40E_CLIENT_SERVICE_REQUESTED, pf->state); set_bit(__I40E_CLIENT_L2_CHANGE, pf->state); } - /* registers are set, lets apply */ - if (pf->hw_features & I40E_HW_USE_SET_LLDP_MIB) - ret = i40e_hw_set_dcb_config(pf, new_cfg); + /* registers are set, lets apply */ + if (pf->hw_features & I40E_HW_USE_SET_LLDP_MIB) + ret = i40e_hw_set_dcb_config(pf, new_cfg); } err: @@ -10587,7 +10587,7 @@ static void i40e_rebuild(struct i40e_pf *pf, bool reinit, bool lock_acquired) i40e_aq_set_dcb_parameters(hw, false, NULL); dev_warn(&pf->pdev->dev, "DCB is not supported for X710-T*L 2.5/5G speeds\n"); - pf->flags &= ~I40E_FLAG_DCB_CAPABLE; + pf->flags &= ~I40E_FLAG_DCB_CAPABLE; } else { i40e_aq_set_dcb_parameters(hw, true, NULL); ret = i40e_init_pf_dcb(pf); -- cgit v1.2.3 From 528060ef3e1105c5c3eba66ffbfc80e0825e2cce Mon Sep 17 00:00:00 2001 From: Magnus Karlsson Date: Fri, 19 Mar 2021 10:44:10 +0100 Subject: i40e: fix receiving of single packets in xsk zero-copy mode Fix so that single packets are received immediately instead of in batches of 8. If you sent 1 pps to a system, you received 8 packets every 8 seconds instead of 1 packet every second. The problem behind this was that the work_done reporting from the Tx part of the driver was broken. The work_done reporting in i40e controls not only the reporting back to the napi logic but also the setting of the interrupt throttling logic. When Tx or Rx reports that it has more to do, interrupts are throttled or coalesced and when they both report that they are done, interrupts are armed right away. If the wrong work_done value is returned, the logic will start to throttle interrupts in a situation where it should have just enabled them. This leads to the undesired batching behavior seen in user-space. Fix this by returning the correct boolean value from the Tx xsk zero-copy path. Return true if there is nothing to do or if we got fewer packets to process than we asked for. Return false if we got as many packets as the budget since there might be more packets we can process. Fixes: 3106c580fb7c ("i40e: Use batched xsk Tx interfaces to increase performance") Reported-by: Sreedevi Joshi Signed-off-by: Magnus Karlsson Acked-by: Maciej Fijalkowski Tested-by: Kiran Bhandare Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/i40e/i40e_xsk.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/i40e/i40e_xsk.c b/drivers/net/ethernet/intel/i40e/i40e_xsk.c index fc32c5019b0f..12ca84113587 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_xsk.c +++ b/drivers/net/ethernet/intel/i40e/i40e_xsk.c @@ -471,7 +471,7 @@ static bool i40e_xmit_zc(struct i40e_ring *xdp_ring, unsigned int budget) nb_pkts = xsk_tx_peek_release_desc_batch(xdp_ring->xsk_pool, descs, budget); if (!nb_pkts) - return false; + return true; if (xdp_ring->next_to_use + nb_pkts >= xdp_ring->count) { nb_processed = xdp_ring->count - xdp_ring->next_to_use; @@ -488,7 +488,7 @@ static bool i40e_xmit_zc(struct i40e_ring *xdp_ring, unsigned int budget) i40e_update_tx_stats(xdp_ring, nb_pkts, total_bytes); - return true; + return nb_pkts < budget; } /** -- cgit v1.2.3 From c3214de929dbf1b7374add8bbed30ce82b197bbb Mon Sep 17 00:00:00 2001 From: Eryk Rybak Date: Tue, 2 Mar 2021 08:46:27 +0100 Subject: i40e: Fix display statistics for veb_tc If veb-stats was enabled, the ethtool stats triggered a warning due to invalid size: 'unexpected stat size for veb.tc_%u_tx_packets'. This was due to an incorrect structure definition for the statistics. Structures and functions have been improved in line with requirements for the presentation of statistics, in particular for the functions: 'i40e_add_ethtool_stats' and 'i40e_add_stat_strings'. Fixes: 1510ae0be2a4 ("i40e: convert VEB TC stats to use an i40e_stats array") Signed-off-by: Eryk Rybak Signed-off-by: Grzegorz Szczurek Reviewed-by: Aleksandr Loktionov Tested-by: Dave Switzer Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 52 +++++++++++++++++++++++--- 1 file changed, 46 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c index 2c637a5678b3..96d5202a73e8 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c +++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c @@ -232,6 +232,8 @@ static void __i40e_add_stat_strings(u8 **p, const struct i40e_stats stats[], I40E_STAT(struct i40e_vsi, _name, _stat) #define I40E_VEB_STAT(_name, _stat) \ I40E_STAT(struct i40e_veb, _name, _stat) +#define I40E_VEB_TC_STAT(_name, _stat) \ + I40E_STAT(struct i40e_cp_veb_tc_stats, _name, _stat) #define I40E_PFC_STAT(_name, _stat) \ I40E_STAT(struct i40e_pfc_stats, _name, _stat) #define I40E_QUEUE_STAT(_name, _stat) \ @@ -266,11 +268,18 @@ static const struct i40e_stats i40e_gstrings_veb_stats[] = { I40E_VEB_STAT("veb.rx_unknown_protocol", stats.rx_unknown_protocol), }; +struct i40e_cp_veb_tc_stats { + u64 tc_rx_packets; + u64 tc_rx_bytes; + u64 tc_tx_packets; + u64 tc_tx_bytes; +}; + static const struct i40e_stats i40e_gstrings_veb_tc_stats[] = { - I40E_VEB_STAT("veb.tc_%u_tx_packets", tc_stats.tc_tx_packets), - I40E_VEB_STAT("veb.tc_%u_tx_bytes", tc_stats.tc_tx_bytes), - I40E_VEB_STAT("veb.tc_%u_rx_packets", tc_stats.tc_rx_packets), - I40E_VEB_STAT("veb.tc_%u_rx_bytes", tc_stats.tc_rx_bytes), + I40E_VEB_TC_STAT("veb.tc_%u_tx_packets", tc_tx_packets), + I40E_VEB_TC_STAT("veb.tc_%u_tx_bytes", tc_tx_bytes), + I40E_VEB_TC_STAT("veb.tc_%u_rx_packets", tc_rx_packets), + I40E_VEB_TC_STAT("veb.tc_%u_rx_bytes", tc_rx_bytes), }; static const struct i40e_stats i40e_gstrings_misc_stats[] = { @@ -2217,6 +2226,29 @@ static int i40e_get_sset_count(struct net_device *netdev, int sset) } } +/** + * i40e_get_veb_tc_stats - copy VEB TC statistics to formatted structure + * @tc: the TC statistics in VEB structure (veb->tc_stats) + * @i: the index of traffic class in (veb->tc_stats) structure to copy + * + * Copy VEB TC statistics from structure of arrays (veb->tc_stats) to + * one dimensional structure i40e_cp_veb_tc_stats. + * Produce formatted i40e_cp_veb_tc_stats structure of the VEB TC + * statistics for the given TC. + **/ +static struct i40e_cp_veb_tc_stats +i40e_get_veb_tc_stats(struct i40e_veb_tc_stats *tc, unsigned int i) +{ + struct i40e_cp_veb_tc_stats veb_tc = { + .tc_rx_packets = tc->tc_rx_packets[i], + .tc_rx_bytes = tc->tc_rx_bytes[i], + .tc_tx_packets = tc->tc_tx_packets[i], + .tc_tx_bytes = tc->tc_tx_bytes[i], + }; + + return veb_tc; +} + /** * i40e_get_pfc_stats - copy HW PFC statistics to formatted structure * @pf: the PF device structure @@ -2301,8 +2333,16 @@ static void i40e_get_ethtool_stats(struct net_device *netdev, i40e_gstrings_veb_stats); for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) - i40e_add_ethtool_stats(&data, veb_stats ? veb : NULL, - i40e_gstrings_veb_tc_stats); + if (veb_stats) { + struct i40e_cp_veb_tc_stats veb_tc = + i40e_get_veb_tc_stats(&veb->tc_stats, i); + + i40e_add_ethtool_stats(&data, &veb_tc, + i40e_gstrings_veb_tc_stats); + } else { + i40e_add_ethtool_stats(&data, NULL, + i40e_gstrings_veb_tc_stats); + } i40e_add_ethtool_stats(&data, pf, i40e_gstrings_stats); -- cgit v1.2.3 From 7582207b1059129e59eb92026fca2cfc088a74fc Mon Sep 17 00:00:00 2001 From: Md Haris Iqbal Date: Thu, 25 Mar 2021 16:32:57 +0100 Subject: RDMA/rtrs-clt: Close rtrs client conn before destroying rtrs clt session files KASAN detected the following BUG: BUG: KASAN: use-after-free in rtrs_clt_update_wc_stats+0x41/0x100 [rtrs_client] Read of size 8 at addr ffff88bf2fb4adc0 by task swapper/0/0 CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 5.4.84-pserver #5.4.84-1+feature+linux+5.4.y+dbg+20201216.1319+b6b887b~deb10 Hardware name: Supermicro H8QG6/H8QG6, BIOS 3.00 09/04/2012 Call Trace: dump_stack+0x96/0xe0 print_address_description.constprop.4+0x1f/0x300 ? irq_work_claim+0x2e/0x50 __kasan_report.cold.8+0x78/0x92 ? rtrs_clt_update_wc_stats+0x41/0x100 [rtrs_client] kasan_report+0x10/0x20 rtrs_clt_update_wc_stats+0x41/0x100 [rtrs_client] rtrs_clt_rdma_done+0xb1/0x760 [rtrs_client] ? lockdep_hardirqs_on+0x1a8/0x290 ? process_io_rsp+0xb0/0xb0 [rtrs_client] ? mlx4_ib_destroy_cq+0x100/0x100 [mlx4_ib] ? add_interrupt_randomness+0x1a2/0x340 __ib_process_cq+0x97/0x100 [ib_core] ib_poll_handler+0x41/0xb0 [ib_core] irq_poll_softirq+0xe0/0x260 __do_softirq+0x127/0x672 irq_exit+0xd1/0xe0 do_IRQ+0xa3/0x1d0 common_interrupt+0xf/0xf RIP: 0010:cpuidle_enter_state+0xea/0x780 Code: 31 ff e8 99 48 47 ff 80 7c 24 08 00 74 12 9c 58 f6 c4 02 0f 85 53 05 00 00 31 ff e8 b0 6f 53 ff e8 ab 4f 5e ff fb 8b 44 24 04 <85> c0 0f 89 f3 01 00 00 48 8d 7b 14 e8 65 1e 77 ff c7 43 14 00 00 RSP: 0018:ffffffffab007d58 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffca RAX: 0000000000000002 RBX: ffff88b803d69800 RCX: ffffffffa91a8298 RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffffffffab021414 RBP: ffffffffab6329e0 R08: 0000000000000002 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000002 R13: 000000bf39d82466 R14: ffffffffab632aa0 R15: ffffffffab632ae0 ? lockdep_hardirqs_on+0x1a8/0x290 ? cpuidle_enter_state+0xe5/0x780 cpuidle_enter+0x3c/0x60 do_idle+0x2fb/0x390 ? arch_cpu_idle_exit+0x40/0x40 ? schedule+0x94/0x120 cpu_startup_entry+0x19/0x1b start_kernel+0x5da/0x61b ? thread_stack_cache_init+0x6/0x6 ? load_ucode_amd_bsp+0x6f/0xc4 ? init_amd_microcode+0xa6/0xa6 ? x86_family+0x5/0x20 ? load_ucode_bsp+0x182/0x1fd secondary_startup_64+0xa4/0xb0 Allocated by task 5730: save_stack+0x19/0x80 __kasan_kmalloc.constprop.9+0xc1/0xd0 kmem_cache_alloc_trace+0x15b/0x350 alloc_sess+0xf4/0x570 [rtrs_client] rtrs_clt_open+0x3b4/0x780 [rtrs_client] find_and_get_or_create_sess+0x649/0x9d0 [rnbd_client] rnbd_clt_map_device+0xd7/0xf50 [rnbd_client] rnbd_clt_map_device_store+0x4ee/0x970 [rnbd_client] kernfs_fop_write+0x141/0x240 vfs_write+0xf3/0x280 ksys_write+0xba/0x150 do_syscall_64+0x68/0x270 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 5822: save_stack+0x19/0x80 __kasan_slab_free+0x125/0x170 kfree+0xe7/0x3f0 kobject_put+0xd3/0x240 rtrs_clt_destroy_sess_files+0x3f/0x60 [rtrs_client] rtrs_clt_close+0x3c/0x80 [rtrs_client] close_rtrs+0x45/0x80 [rnbd_client] rnbd_client_exit+0x10f/0x2bd [rnbd_client] __x64_sys_delete_module+0x27b/0x340 do_syscall_64+0x68/0x270 entry_SYSCALL_64_after_hwframe+0x49/0xbe When rtrs_clt_close is triggered, it iterates over all the present rtrs_clt_sess and triggers close on them. However, the call to rtrs_clt_destroy_sess_files is done before the rtrs_clt_close_conns. This is incorrect since during the initialization phase we allocate rtrs_clt_sess first, and then we go ahead and create rtrs_clt_con for it. If we free the rtrs_clt_sess structure before closing the rtrs_clt_con, it may so happen that an inflight IO completion would trigger the function rtrs_clt_rdma_done, which would lead to the above UAF case. Hence close the rtrs_clt_con connections first, and then trigger the destruction of session files. Fixes: 6a98d71daea1 ("RDMA/rtrs: client: main functionality") Link: https://lore.kernel.org/r/20210325153308.1214057-12-gi-oh.kim@ionos.com Signed-off-by: Md Haris Iqbal Signed-off-by: Jack Wang Signed-off-by: Gioh Kim Signed-off-by: Jason Gunthorpe --- drivers/infiniband/ulp/rtrs/rtrs-clt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/rtrs/rtrs-clt.c b/drivers/infiniband/ulp/rtrs/rtrs-clt.c index 0a08b4b742a3..6734329cca33 100644 --- a/drivers/infiniband/ulp/rtrs/rtrs-clt.c +++ b/drivers/infiniband/ulp/rtrs/rtrs-clt.c @@ -2720,8 +2720,8 @@ void rtrs_clt_close(struct rtrs_clt *clt) /* Now it is safe to iterate over all paths without locks */ list_for_each_entry_safe(sess, tmp, &clt->paths_list, s.entry) { - rtrs_clt_destroy_sess_files(sess, NULL); rtrs_clt_close_conns(sess, true); + rtrs_clt_destroy_sess_files(sess, NULL); kobject_put(&sess->kobj); } free_clt(clt); -- cgit v1.2.3 From 5620b135aea49a8f41c86aaecfcb1598a7774121 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Thu, 25 Mar 2021 14:28:22 -0700 Subject: drm/msm: Set drvdata to NULL when msm_drm_init() fails We should set the platform device's driver data to NULL here so that code doesn't assume the struct drm_device pointer is valid when it could have been destroyed. The lifetime of this pointer is managed by a kref but when msm_drm_init() fails we call drm_dev_put() on the pointer which will free the pointer's memory. This driver uses the component model, so there's sort of two "probes" in this file, one for the platform device i.e. msm_pdev_probe() and one for the component i.e. msm_drm_bind(). The msm_drm_bind() code is using the platform device's driver data to store struct drm_device so the two functions are intertwined. This relationship becomes a problem for msm_pdev_shutdown() when it tests the NULL-ness of the pointer to see if it should call drm_atomic_helper_shutdown(). The NULL test is a proxy check for if the pointer has been freed by kref_put(). If the drm_device has been destroyed, then we shouldn't call the shutdown helper, and we know that is the case if msm_drm_init() failed, therefore set the driver data to NULL so that this pointer liveness is tracked properly. Fixes: 9d5cbf5fe46e ("drm/msm: add shutdown support for display platform_driver") Cc: Dmitry Baryshkov Cc: Fabio Estevam Cc: Krishna Manikandan Signed-off-by: Stephen Boyd Message-Id: <20210325212822.3663144-1-swboyd@chromium.org> Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/msm_drv.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c index a5c6b8c23336..196907689c82 100644 --- a/drivers/gpu/drm/msm/msm_drv.c +++ b/drivers/gpu/drm/msm/msm_drv.c @@ -570,6 +570,7 @@ err_free_priv: kfree(priv); err_put_drm_dev: drm_dev_put(ddev); + platform_set_drvdata(pdev, NULL); return ret; } -- cgit v1.2.3 From 2b0b219e5ff8bcc673d3a2cb6f327b3c62c5637d Mon Sep 17 00:00:00 2001 From: John Stultz Date: Tue, 30 Mar 2021 01:34:08 +0000 Subject: drm/msm: Fix removal of valid error case when checking speed_bin Commit 7bf168c8fe8c ("drm/msm: Fix speed-bin support not to access outside valid memory"), reworked the nvmem reading of "speed_bin", but in doing so dropped handling of the -ENOENT case which was previously documented as "fine". That change resulted in the db845c board display to fail to start, with the following error: adreno 5000000.gpu: [drm:a6xx_gpu_init] *ERROR* failed to read speed-bin (-2). Some OPPs may not be supported by hardware Thus, this patch simply re-adds the ENOENT handling so the lack of the speed_bin entry isn't fatal for display, and gets things working on db845c. Cc: Rob Clark Cc: Sean Paul Cc: Jordan Crouse Cc: Eric Anholt Cc: Douglas Anderson Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: Bjorn Andersson Cc: YongQin Liu Reported-by: YongQin Liu Fixes: 7bf168c8fe8c ("drm/msm: Fix speed-bin support not to access outside valid memory") Signed-off-by: John Stultz Reviewed-by: Akhil P Oommen Reviewed-by: Douglas Anderson Message-Id: <20210330013408.2532048-1-john.stultz@linaro.org> Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c index 690409ca8a18..cb2df8736ca8 100644 --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c @@ -1406,7 +1406,13 @@ static int a6xx_set_supported_hw(struct device *dev, struct a6xx_gpu *a6xx_gpu, int ret; ret = nvmem_cell_read_u16(dev, "speed_bin", &speedbin); - if (ret) { + /* + * -ENOENT means that the platform doesn't support speedbin which is + * fine + */ + if (ret == -ENOENT) { + return 0; + } else if (ret) { DRM_DEV_ERROR(dev, "failed to read speed-bin (%d). Some OPPs may not be supported by hardware", ret); -- cgit v1.2.3 From 6b9fbe16955152626557ec6f439f3407b7769941 Mon Sep 17 00:00:00 2001 From: Pavel Skripkin Date: Thu, 1 Apr 2021 07:46:24 +0300 Subject: drivers: net: fix memory leak in atusb_probe syzbot reported memory leak in atusb_probe()[1]. The problem was in atusb_alloc_urbs(). Since urb is anchored, we need to release the reference to correctly free the urb backtrace: [] kmalloc include/linux/slab.h:559 [inline] [] usb_alloc_urb+0x66/0xe0 drivers/usb/core/urb.c:74 [] atusb_alloc_urbs drivers/net/ieee802154/atusb.c:362 [inline][2] [] atusb_probe+0x158/0x820 drivers/net/ieee802154/atusb.c:1038 [1] Reported-by: syzbot+28a246747e0a465127f3@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin Signed-off-by: David S. Miller --- drivers/net/ieee802154/atusb.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ieee802154/atusb.c b/drivers/net/ieee802154/atusb.c index 0dd0ba915ab9..23ee0b14cbfa 100644 --- a/drivers/net/ieee802154/atusb.c +++ b/drivers/net/ieee802154/atusb.c @@ -365,6 +365,7 @@ static int atusb_alloc_urbs(struct atusb *atusb, int n) return -ENOMEM; } usb_anchor_urb(urb, &atusb->idle_urbs); + usb_free_urb(urb); n--; } return 0; -- cgit v1.2.3 From a0b96b4a62745397aee662670cfc2157bac03f55 Mon Sep 17 00:00:00 2001 From: Pavel Skripkin Date: Thu, 1 Apr 2021 16:27:52 +0300 Subject: drivers: net: fix memory leak in peak_usb_create_dev syzbot reported memory leak in peak_usb. The problem was in case of failure after calling ->dev_init()[2] in peak_usb_create_dev()[1]. The data allocated int dev_init() wasn't freed, so simple ->dev_free() call fix this problem. backtrace: [<0000000079d6542a>] kmalloc include/linux/slab.h:552 [inline] [<0000000079d6542a>] kzalloc include/linux/slab.h:682 [inline] [<0000000079d6542a>] pcan_usb_fd_init+0x156/0x210 drivers/net/can/usb/peak_usb/pcan_usb_fd.c:868 [2] [<00000000c09f9057>] peak_usb_create_dev drivers/net/can/usb/peak_usb/pcan_usb_core.c:851 [inline] [1] [<00000000c09f9057>] peak_usb_probe+0x389/0x490 drivers/net/can/usb/peak_usb/pcan_usb_core.c:949 Reported-by: syzbot+91adee8d9ebb9193d22d@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin Signed-off-by: David S. Miller --- drivers/net/can/usb/peak_usb/pcan_usb_core.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_core.c b/drivers/net/can/usb/peak_usb/pcan_usb_core.c index 573b11559d73..28e916a04047 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_core.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb_core.c @@ -857,7 +857,7 @@ static int peak_usb_create_dev(const struct peak_usb_adapter *peak_usb_adapter, if (dev->adapter->dev_set_bus) { err = dev->adapter->dev_set_bus(dev, 0); if (err) - goto lbl_unregister_candev; + goto adap_dev_free; } /* get device number early */ @@ -869,6 +869,10 @@ static int peak_usb_create_dev(const struct peak_usb_adapter *peak_usb_adapter, return 0; +adap_dev_free: + if (dev->adapter->dev_free) + dev->adapter->dev_free(dev); + lbl_unregister_candev: unregister_candev(netdev); -- cgit v1.2.3 From 5482a9a1a8fd23fbb57afc6d409e12713aa93fa5 Mon Sep 17 00:00:00 2001 From: Sergei Trofimovich Date: Tue, 30 Mar 2021 08:19:56 +0100 Subject: scsi: hpsa: Use __packed on individual structs, not header-wide The hpsa driver uses data structures which contain a combination of driver internals and commands sent directly to the hardware. To manage alignment for the hardware portions the driver used #pragma pack(1). Commit f749d8b7a989 ("scsi: hpsa: Correct dev cmds outstanding for retried cmds") switched an existing variable from int to bool. Due to the pragma an atomic_t in the same data structure ended up being misaligned and broke boot on ia64. Add __packed to every struct and union in the header file. Subsequent commits will address the actual atomic_t misalignment regression. The commit is a no-op at least on ia64: $ diff -u <(objdump -d -r old.o) <(objdump -d -r new.o) Link: https://lore.kernel.org/r/20210330071958.3788214-1-slyfox@gentoo.org Fixes: f749d8b7a989 ("scsi: hpsa: Correct dev cmds outstanding for retried cmds") CC: linux-ia64@vger.kernel.org CC: storagedev@microchip.com CC: linux-scsi@vger.kernel.org CC: Joe Szczypek CC: Scott Benesh CC: Scott Teel CC: Tomas Henzl CC: "Martin K. Petersen" CC: Don Brace Reported-by: John Paul Adrian Glaubitz Suggested-by: Don Brace Reviewed-by: Arnd Bergmann Signed-off-by: Sergei Trofimovich Signed-off-by: Martin K. Petersen --- drivers/scsi/hpsa_cmd.h | 68 ++++++++++++++++++++++++------------------------- 1 file changed, 34 insertions(+), 34 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h index d126bb877250..280e933d27e7 100644 --- a/drivers/scsi/hpsa_cmd.h +++ b/drivers/scsi/hpsa_cmd.h @@ -20,6 +20,8 @@ #ifndef HPSA_CMD_H #define HPSA_CMD_H +#include + /* general boundary defintions */ #define SENSEINFOBYTES 32 /* may vary between hbas */ #define SG_ENTRIES_IN_CMD 32 /* Max SG entries excluding chain blocks */ @@ -200,12 +202,10 @@ union u64bit { MAX_EXT_TARGETS + 1) /* + 1 is for the controller itself */ /* SCSI-3 Commands */ -#pragma pack(1) - #define HPSA_INQUIRY 0x12 struct InquiryData { u8 data_byte[36]; -}; +} __packed; #define HPSA_REPORT_LOG 0xc2 /* Report Logical LUNs */ #define HPSA_REPORT_PHYS 0xc3 /* Report Physical LUNs */ @@ -221,7 +221,7 @@ struct raid_map_disk_data { u8 xor_mult[2]; /**< XOR multipliers for this position, * valid for data disks only */ u8 reserved[2]; -}; +} __packed; struct raid_map_data { __le32 structure_size; /* Size of entire structure in bytes */ @@ -247,14 +247,14 @@ struct raid_map_data { __le16 dekindex; /* Data encryption key index. */ u8 reserved[16]; struct raid_map_disk_data data[RAID_MAP_MAX_ENTRIES]; -}; +} __packed; struct ReportLUNdata { u8 LUNListLength[4]; u8 extended_response_flag; u8 reserved[3]; u8 LUN[HPSA_MAX_LUN][8]; -}; +} __packed; struct ext_report_lun_entry { u8 lunid[8]; @@ -269,20 +269,20 @@ struct ext_report_lun_entry { u8 lun_count; /* multi-lun device, how many luns */ u8 redundant_paths; u32 ioaccel_handle; /* ioaccel1 only uses lower 16 bits */ -}; +} __packed; struct ReportExtendedLUNdata { u8 LUNListLength[4]; u8 extended_response_flag; u8 reserved[3]; struct ext_report_lun_entry LUN[HPSA_MAX_PHYS_LUN]; -}; +} __packed; struct SenseSubsystem_info { u8 reserved[36]; u8 portname[8]; u8 reserved1[1108]; -}; +} __packed; /* BMIC commands */ #define BMIC_READ 0x26 @@ -317,7 +317,7 @@ union SCSI3Addr { u8 Targ:6; u8 Mode:2; /* b10 */ } LogUnit; -}; +} __packed; struct PhysDevAddr { u32 TargetId:24; @@ -325,20 +325,20 @@ struct PhysDevAddr { u32 Mode:2; /* 2 level target device addr */ union SCSI3Addr Target[2]; -}; +} __packed; struct LogDevAddr { u32 VolId:30; u32 Mode:2; u8 reserved[4]; -}; +} __packed; union LUNAddr { u8 LunAddrBytes[8]; union SCSI3Addr SCSI3Lun[4]; struct PhysDevAddr PhysDev; struct LogDevAddr LogDev; -}; +} __packed; struct CommandListHeader { u8 ReplyQueue; @@ -346,7 +346,7 @@ struct CommandListHeader { __le16 SGTotal; __le64 tag; union LUNAddr LUN; -}; +} __packed; struct RequestBlock { u8 CDBLen; @@ -365,18 +365,18 @@ struct RequestBlock { #define GET_DIR(tad) (((tad) >> 6) & 0x03) u16 Timeout; u8 CDB[16]; -}; +} __packed; struct ErrDescriptor { __le64 Addr; __le32 Len; -}; +} __packed; struct SGDescriptor { __le64 Addr; __le32 Len; __le32 Ext; -}; +} __packed; union MoreErrInfo { struct { @@ -390,7 +390,8 @@ union MoreErrInfo { u8 offense_num; /* byte # of offense 0-base */ u32 offense_value; } Invalid_Cmd; -}; +} __packed; + struct ErrorInfo { u8 ScsiStatus; u8 SenseLen; @@ -398,7 +399,7 @@ struct ErrorInfo { u32 ResidualCnt; union MoreErrInfo MoreErrInfo; u8 SenseInfo[SENSEINFOBYTES]; -}; +} __packed; /* Command types */ #define CMD_IOCTL_PEND 0x01 #define CMD_SCSI 0x03 @@ -451,7 +452,7 @@ struct CommandList { bool retry_pending; struct hpsa_scsi_dev_t *device; atomic_t refcount; /* Must be last to avoid memset in hpsa_cmd_init() */ -} __aligned(COMMANDLIST_ALIGNMENT); +} __packed __aligned(COMMANDLIST_ALIGNMENT); /* Max S/G elements in I/O accelerator command */ #define IOACCEL1_MAXSGENTRIES 24 @@ -489,7 +490,7 @@ struct io_accel1_cmd { __le64 host_addr; /* 0x70 - 0x77 */ u8 CISS_LUN[8]; /* 0x78 - 0x7F */ struct SGDescriptor SG[IOACCEL1_MAXSGENTRIES]; -} __aligned(IOACCEL1_COMMANDLIST_ALIGNMENT); +} __packed __aligned(IOACCEL1_COMMANDLIST_ALIGNMENT); #define IOACCEL1_FUNCTION_SCSIIO 0x00 #define IOACCEL1_SGLOFFSET 32 @@ -519,7 +520,7 @@ struct ioaccel2_sg_element { u8 chain_indicator; #define IOACCEL2_CHAIN 0x80 #define IOACCEL2_LAST_SG 0x40 -}; +} __packed; /* * SCSI Response Format structure for IO Accelerator Mode 2 @@ -559,7 +560,7 @@ struct io_accel2_scsi_response { u8 sense_data_len; /* sense/response data length */ u8 resid_cnt[4]; /* residual count */ u8 sense_data_buff[32]; /* sense/response data buffer */ -}; +} __packed; /* * Structure for I/O accelerator (mode 2 or m2) commands. @@ -592,7 +593,7 @@ struct io_accel2_cmd { __le32 tweak_upper; /* Encryption tweak, upper 4 bytes */ struct ioaccel2_sg_element sg[IOACCEL2_MAXSGENTRIES]; struct io_accel2_scsi_response error_data; -} __aligned(IOACCEL2_COMMANDLIST_ALIGNMENT); +} __packed __aligned(IOACCEL2_COMMANDLIST_ALIGNMENT); /* * defines for Mode 2 command struct @@ -618,7 +619,7 @@ struct hpsa_tmf_struct { __le64 abort_tag; /* cciss tag of SCSI cmd or TMF to abort */ __le64 error_ptr; /* Error Pointer */ __le32 error_len; /* Error Length */ -} __aligned(IOACCEL2_COMMANDLIST_ALIGNMENT); +} __packed __aligned(IOACCEL2_COMMANDLIST_ALIGNMENT); /* Configuration Table Structure */ struct HostWrite { @@ -626,7 +627,7 @@ struct HostWrite { __le32 command_pool_addr_hi; __le32 CoalIntDelay; __le32 CoalIntCount; -}; +} __packed; #define SIMPLE_MODE 0x02 #define PERFORMANT_MODE 0x04 @@ -675,7 +676,7 @@ struct CfgTable { #define HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_STATE_CHANGE (1 << 30) #define HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_CONFIG_CHANGE (1 << 31) __le32 clear_event_notify; -}; +} __packed; #define NUM_BLOCKFETCH_ENTRIES 8 struct TransTable_struct { @@ -686,14 +687,14 @@ struct TransTable_struct { __le32 RepQCtrAddrHigh32; #define MAX_REPLY_QUEUES 64 struct vals32 RepQAddr[MAX_REPLY_QUEUES]; -}; +} __packed; struct hpsa_pci_info { unsigned char bus; unsigned char dev_fn; unsigned short domain; u32 board_id; -}; +} __packed; struct bmic_identify_controller { u8 configured_logical_drive_count; /* offset 0 */ @@ -702,7 +703,7 @@ struct bmic_identify_controller { u8 pad2[136]; u8 controller_mode; /* offset 292 */ u8 pad3[32]; -}; +} __packed; struct bmic_identify_physical_device { @@ -845,7 +846,7 @@ struct bmic_identify_physical_device { u8 max_link_rate[256]; u8 neg_phys_link_rate[256]; u8 box_conn_name[8]; -} __attribute((aligned(512))); +} __packed __attribute((aligned(512))); struct bmic_sense_subsystem_info { u8 primary_slot_number; @@ -858,7 +859,7 @@ struct bmic_sense_subsystem_info { u8 secondary_array_serial_number[32]; u8 secondary_cache_serial_number[32]; u8 pad[332]; -}; +} __packed; struct bmic_sense_storage_box_params { u8 reserved[36]; @@ -870,7 +871,6 @@ struct bmic_sense_storage_box_params { u8 reserver_3[84]; u8 phys_connector[2]; u8 reserved_4[296]; -}; +} __packed; -#pragma pack() #endif /* HPSA_CMD_H */ -- cgit v1.2.3 From 02ec144292bc424a5800d45d4cb472c66e97c520 Mon Sep 17 00:00:00 2001 From: Sergei Trofimovich Date: Tue, 30 Mar 2021 08:19:57 +0100 Subject: scsi: hpsa: Fix boot on ia64 (atomic_t alignment) Boot failure was observed on an HP rx3600 ia64 machine with RAID bus controller: Hewlett-Packard Company Smart Array P600: kernel unaligned access to 0xe000000105dd8b95, ip=0xa000000100b87551 kernel unaligned access to 0xe000000105dd8e95, ip=0xa000000100b87551 hpsa 0000:14:01.0: Controller reports max supported commands of 0 Using 16 instead. Ensure that firmware is up to date. swapper/0[1]: error during unaligned kernel access The unaligned access comes from 'struct CommandList' that happens to be packed. Commit f749d8b7a989 ("scsi: hpsa: Correct dev cmds outstanding for retried cmds") introduced unexpected padding and unaligned atomic_t from natural alignment to something else. This change removes packing annotation from a struct not intended to be sent to controller as is. This restores natural `atomic_t` alignment. The change was tested on the same rx3600 machine. Link: https://lore.kernel.org/r/20210330071958.3788214-2-slyfox@gentoo.org Fixes: f749d8b7a989 ("scsi: hpsa: Correct dev cmds outstanding for retried cmds") CC: linux-ia64@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: storagedev@microchip.com CC: linux-scsi@vger.kernel.org CC: Joe Szczypek CC: Scott Benesh CC: Scott Teel CC: Tomas Henzl CC: "Martin K. Petersen" CC: Don Brace Reported-by: John Paul Adrian Glaubitz Suggested-by: Don Brace Reviewed-by: Arnd Bergmann Signed-off-by: Sergei Trofimovich Signed-off-by: Martin K. Petersen --- drivers/scsi/hpsa_cmd.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h index 280e933d27e7..885b1f1fb20a 100644 --- a/drivers/scsi/hpsa_cmd.h +++ b/drivers/scsi/hpsa_cmd.h @@ -452,7 +452,7 @@ struct CommandList { bool retry_pending; struct hpsa_scsi_dev_t *device; atomic_t refcount; /* Must be last to avoid memset in hpsa_cmd_init() */ -} __packed __aligned(COMMANDLIST_ALIGNMENT); +} __aligned(COMMANDLIST_ALIGNMENT); /* Max S/G elements in I/O accelerator command */ #define IOACCEL1_MAXSGENTRIES 24 -- cgit v1.2.3 From e01a00ff62adca8ec464f3c8d82cfa0e8d8728dd Mon Sep 17 00:00:00 2001 From: Sergei Trofimovich Date: Tue, 30 Mar 2021 08:19:58 +0100 Subject: scsi: hpsa: Add an assert to prevent __packed reintroduction Link: https://lore.kernel.org/r/20210330071958.3788214-3-slyfox@gentoo.org Fixes: f749d8b7a989 ("scsi: hpsa: Correct dev cmds outstanding for retried cmds") CC: linux-ia64@vger.kernel.org CC: storagedev@microchip.com CC: linux-scsi@vger.kernel.org CC: Joe Szczypek CC: Scott Benesh CC: Scott Teel CC: Tomas Henzl CC: "Martin K. Petersen" CC: Don Brace Reported-by: John Paul Adrian Glaubitz Suggested-by: Don Brace Reviewed-by: Arnd Bergmann Signed-off-by: Sergei Trofimovich Signed-off-by: Martin K. Petersen --- drivers/scsi/hpsa_cmd.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h index 885b1f1fb20a..ba6a3aa8d954 100644 --- a/drivers/scsi/hpsa_cmd.h +++ b/drivers/scsi/hpsa_cmd.h @@ -22,6 +22,9 @@ #include +#include /* static_assert */ +#include /* offsetof */ + /* general boundary defintions */ #define SENSEINFOBYTES 32 /* may vary between hbas */ #define SG_ENTRIES_IN_CMD 32 /* Max SG entries excluding chain blocks */ @@ -454,6 +457,15 @@ struct CommandList { atomic_t refcount; /* Must be last to avoid memset in hpsa_cmd_init() */ } __aligned(COMMANDLIST_ALIGNMENT); +/* + * Make sure our embedded atomic variable is aligned. Otherwise we break atomic + * operations on architectures that don't support unaligned atomics like IA64. + * + * The assert guards against reintroductin against unwanted __packed to + * the struct CommandList. + */ +static_assert(offsetof(struct CommandList, refcount) % __alignof__(atomic_t) == 0); + /* Max S/G elements in I/O accelerator command */ #define IOACCEL1_MAXSGENTRIES 24 #define IOACCEL2_MAXSGENTRIES 28 -- cgit v1.2.3 From 1235fc569e0bf541ddda0a1224d4c6fa6d914890 Mon Sep 17 00:00:00 2001 From: Can Guo Date: Thu, 1 Apr 2021 00:39:08 -0700 Subject: scsi: ufs: core: Fix task management request completion timeout ufshcd_tmc_handler() calls blk_mq_tagset_busy_iter(fn = ufshcd_compl_tm()), but since blk_mq_tagset_busy_iter() only iterates over all reserved tags and requests which are not in IDLE state, ufshcd_compl_tm() never gets a chance to run. Thus, TMR always ends up with completion timeout. Fix it by calling blk_mq_start_request() in __ufshcd_issue_tm_cmd(). Link: https://lore.kernel.org/r/1617262750-4864-2-git-send-email-cang@codeaurora.org Fixes: 69a6c269c097 ("scsi: ufs: Use blk_{get,put}_request() to allocate and free TMFs") Reviewed-by: Bart Van Assche Signed-off-by: Can Guo Signed-off-by: Martin K. Petersen --- drivers/scsi/ufs/ufshcd.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index c86760788c72..564918ffc026 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -6404,6 +6404,7 @@ static int __ufshcd_issue_tm_cmd(struct ufs_hba *hba, spin_lock_irqsave(host->host_lock, flags); task_tag = hba->nutrs + free_slot; + blk_mq_start_request(req); treq->req_header.dword_0 |= cpu_to_be32(task_tag); -- cgit v1.2.3 From 4b42d557a8add52b9a9924fb31e40a218aab7801 Mon Sep 17 00:00:00 2001 From: Can Guo Date: Thu, 1 Apr 2021 00:39:09 -0700 Subject: scsi: ufs: core: Fix wrong Task Tag used in task management request UPIUs In __ufshcd_issue_tm_cmd(), it is not correct to use hba->nutrs + req->tag as the Task Tag in a TMR UPIU. Directly use req->tag as the Task Tag. Fixes: e293313262d3 ("scsi: ufs: Fix broken task management command implementation") Link: https://lore.kernel.org/r/1617262750-4864-3-git-send-email-cang@codeaurora.org Reviewed-by: Bart Van Assche Signed-off-by: Can Guo Signed-off-by: Martin K. Petersen --- drivers/scsi/ufs/ufshcd.c | 30 +++++++++++++----------------- 1 file changed, 13 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 564918ffc026..d3d05e997c13 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -6386,38 +6386,34 @@ static int __ufshcd_issue_tm_cmd(struct ufs_hba *hba, DECLARE_COMPLETION_ONSTACK(wait); struct request *req; unsigned long flags; - int free_slot, task_tag, err; + int task_tag, err; /* - * Get free slot, sleep if slots are unavailable. - * Even though we use wait_event() which sleeps indefinitely, - * the maximum wait time is bounded by %TM_CMD_TIMEOUT. + * blk_get_request() is used here only to get a free tag. */ req = blk_get_request(q, REQ_OP_DRV_OUT, 0); if (IS_ERR(req)) return PTR_ERR(req); req->end_io_data = &wait; - free_slot = req->tag; - WARN_ON_ONCE(free_slot < 0 || free_slot >= hba->nutmrs); ufshcd_hold(hba, false); spin_lock_irqsave(host->host_lock, flags); - task_tag = hba->nutrs + free_slot; blk_mq_start_request(req); + task_tag = req->tag; treq->req_header.dword_0 |= cpu_to_be32(task_tag); - memcpy(hba->utmrdl_base_addr + free_slot, treq, sizeof(*treq)); - ufshcd_vops_setup_task_mgmt(hba, free_slot, tm_function); + memcpy(hba->utmrdl_base_addr + task_tag, treq, sizeof(*treq)); + ufshcd_vops_setup_task_mgmt(hba, task_tag, tm_function); /* send command to the controller */ - __set_bit(free_slot, &hba->outstanding_tasks); + __set_bit(task_tag, &hba->outstanding_tasks); /* Make sure descriptors are ready before ringing the task doorbell */ wmb(); - ufshcd_writel(hba, 1 << free_slot, REG_UTP_TASK_REQ_DOOR_BELL); + ufshcd_writel(hba, 1 << task_tag, REG_UTP_TASK_REQ_DOOR_BELL); /* Make sure that doorbell is committed immediately */ wmb(); @@ -6437,24 +6433,24 @@ static int __ufshcd_issue_tm_cmd(struct ufs_hba *hba, ufshcd_add_tm_upiu_trace(hba, task_tag, UFS_TM_ERR); dev_err(hba->dev, "%s: task management cmd 0x%.2x timed-out\n", __func__, tm_function); - if (ufshcd_clear_tm_cmd(hba, free_slot)) - dev_WARN(hba->dev, "%s: unable clear tm cmd (slot %d) after timeout\n", - __func__, free_slot); + if (ufshcd_clear_tm_cmd(hba, task_tag)) + dev_WARN(hba->dev, "%s: unable to clear tm cmd (slot %d) after timeout\n", + __func__, task_tag); err = -ETIMEDOUT; } else { err = 0; - memcpy(treq, hba->utmrdl_base_addr + free_slot, sizeof(*treq)); + memcpy(treq, hba->utmrdl_base_addr + task_tag, sizeof(*treq)); ufshcd_add_tm_upiu_trace(hba, task_tag, UFS_TM_COMP); } spin_lock_irqsave(hba->host->host_lock, flags); - __clear_bit(free_slot, &hba->outstanding_tasks); + __clear_bit(task_tag, &hba->outstanding_tasks); spin_unlock_irqrestore(hba->host->host_lock, flags); + ufshcd_release(hba); blk_put_request(req); - ufshcd_release(hba); return err; } -- cgit v1.2.3 From 9fbd3088351b92e8c2cef6e37a39decb12a8d5bb Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Wed, 24 Mar 2021 18:23:52 -0700 Subject: drm/msm: Fix a5xx/a6xx timestamps They were reading a counter that was configured to ALWAYS_COUNT (ie. cycles that the GPU is doing something) rather than ALWAYS_ON. This isn't the thing that userspace is looking for. Signed-off-by: Rob Clark Acked-by: Jordan Crouse Message-Id: <20210325012358.1759770-2-robdclark@gmail.com> Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/adreno/a5xx_gpu.c | 4 ++-- drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c index 7e553d3efeb2..ce13d49e615b 100644 --- a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c +++ b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c @@ -1386,8 +1386,8 @@ static int a5xx_pm_suspend(struct msm_gpu *gpu) static int a5xx_get_timestamp(struct msm_gpu *gpu, uint64_t *value) { - *value = gpu_read64(gpu, REG_A5XX_RBBM_PERFCTR_CP_0_LO, - REG_A5XX_RBBM_PERFCTR_CP_0_HI); + *value = gpu_read64(gpu, REG_A5XX_RBBM_ALWAYSON_COUNTER_LO, + REG_A5XX_RBBM_ALWAYSON_COUNTER_HI); return 0; } diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c index cb2df8736ca8..5b438f3e4bf9 100644 --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c @@ -1228,8 +1228,8 @@ static int a6xx_get_timestamp(struct msm_gpu *gpu, uint64_t *value) /* Force the GPU power on so we can read this register */ a6xx_gmu_set_oob(&a6xx_gpu->gmu, GMU_OOB_PERFCOUNTER_SET); - *value = gpu_read64(gpu, REG_A6XX_RBBM_PERFCTR_CP_0_LO, - REG_A6XX_RBBM_PERFCTR_CP_0_HI); + *value = gpu_read64(gpu, REG_A6XX_CP_ALWAYS_ON_COUNTER_LO, + REG_A6XX_CP_ALWAYS_ON_COUNTER_HI); a6xx_gmu_clear_oob(&a6xx_gpu->gmu, GMU_OOB_PERFCOUNTER_SET); mutex_unlock(&perfcounter_oob); -- cgit v1.2.3 From 6ddbfa1f5adbd5dea14ff66778ca58257f09f17d Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Wed, 31 Mar 2021 17:02:23 +0300 Subject: drm/msm: a6xx: fix version check for the A650 SQE microcode I suppose the microcode version check for a650 is incorrect. It checks for the version 1.95, while the firmware released have major version of 0: 0.91 (vulnerable), 0.99 (fixing the issue). Lower version requirements to accept firmware 0.99. Fixes: 8490f02a3ca4 ("drm/msm: a6xx: Make sure the SQE microcode is safe") Cc: Akhil P Oommen Cc: Jordan Crouse Signed-off-by: Dmitry Baryshkov Acked-by: Jordan Crouse Message-Id: <20210331140223.3771449-1-dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c index 5b438f3e4bf9..d553f62f4eeb 100644 --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c @@ -567,17 +567,17 @@ static bool a6xx_ucode_check_version(struct a6xx_gpu *a6xx_gpu, } else { /* * a650 tier targets don't need whereami but still need to be - * equal to or newer than 1.95 for other security fixes + * equal to or newer than 0.95 for other security fixes */ if (adreno_is_a650(adreno_gpu)) { - if ((buf[0] & 0xfff) >= 0x195) { + if ((buf[0] & 0xfff) >= 0x095) { ret = true; goto out; } DRM_DEV_ERROR(&gpu->pdev->dev, "a650 SQE ucode is too old. Have version %x need at least %x\n", - buf[0] & 0xfff, 0x195); + buf[0] & 0xfff, 0x095); } /* -- cgit v1.2.3 From 12aca1ce9ee33af3751aec5e55a5900747cbdd4b Mon Sep 17 00:00:00 2001 From: Kalyan Thota Date: Fri, 2 Apr 2021 04:54:53 -0700 Subject: drm/msm/disp/dpu1: program 3d_merge only if block is attached Update the 3d merge as active in the data path only if the hw block is selected in the configuration. Reported-by: Stephen Boyd Fixes: 73bfb790ac78 ("msm:disp:dpu1: setup display datapath for SC7180 target") Signed-off-by: Kalyan Thota Message-Id: <1617364493-13518-1-git-send-email-kalyan_t@codeaurora.org> Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c index 8981cfa9dbc3..92e6f1b94738 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c @@ -496,7 +496,9 @@ static void dpu_hw_ctl_intf_cfg_v1(struct dpu_hw_ctl *ctx, DPU_REG_WRITE(c, CTL_TOP, mode_sel); DPU_REG_WRITE(c, CTL_INTF_ACTIVE, intf_active); - DPU_REG_WRITE(c, CTL_MERGE_3D_ACTIVE, BIT(cfg->merge_3d - MERGE_3D_0)); + if (cfg->merge_3d) + DPU_REG_WRITE(c, CTL_MERGE_3D_ACTIVE, + BIT(cfg->merge_3d - MERGE_3D_0)); } static void dpu_hw_ctl_intf_cfg(struct dpu_hw_ctl *ctx, -- cgit v1.2.3 From a14d273ba15968495896a38b7b3399dba66d0270 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Fri, 2 Apr 2021 15:42:53 +0300 Subject: net: macb: restore cmp registers on resume path Restore CMP screener registers on resume path. Fixes: c1e85c6ce57ef ("net: macb: save/restore the remaining registers and features") Signed-off-by: Claudiu Beznea Acked-by: Nicolas Ferre Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb_main.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c index 15362d016a87..6e5cf490c01d 100644 --- a/drivers/net/ethernet/cadence/macb_main.c +++ b/drivers/net/ethernet/cadence/macb_main.c @@ -3239,6 +3239,9 @@ static void gem_prog_cmp_regs(struct macb *bp, struct ethtool_rx_flow_spec *fs) bool cmp_b = false; bool cmp_c = false; + if (!macb_is_gem(bp)) + return; + tp4sp_v = &(fs->h_u.tcp_ip4_spec); tp4sp_m = &(fs->m_u.tcp_ip4_spec); @@ -3607,6 +3610,7 @@ static void macb_restore_features(struct macb *bp) { struct net_device *netdev = bp->dev; netdev_features_t features = netdev->features; + struct ethtool_rx_fs_item *item; /* TX checksum offload */ macb_set_txcsum_feature(bp, features); @@ -3615,6 +3619,9 @@ static void macb_restore_features(struct macb *bp) macb_set_rxcsum_feature(bp, features); /* RX Flow Filters */ + list_for_each_entry(item, &bp->rx_fs_list.list, list) + gem_prog_cmp_regs(bp, &item->fs); + macb_set_rxflow_feature(bp, features); } -- cgit v1.2.3 From 8d3c0c01cb2e36b2bf3c06a82b18b228d0c8f5d0 Mon Sep 17 00:00:00 2001 From: Lukasz Bartosik Date: Fri, 2 Apr 2021 00:51:48 +0200 Subject: clk: fix invalid usage of list cursor in register Fix invalid usage of a list_for_each_entry cursor in clk_notifier_register(). When list is empty or if the list is completely traversed (without breaking from the loop on one of the entries) then the list cursor does not point to a valid entry and therefore should not be used. The issue was dicovered when running 5.12-rc1 kernel on x86_64 with KASAN enabled: BUG: KASAN: global-out-of-bounds in clk_notifier_register+0xab/0x230 Read of size 8 at addr ffffffffa0d10588 by task swapper/0/1 CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc1 #1 Hardware name: Google Caroline/Caroline, BIOS Google_Caroline.7820.430.0 07/20/2018 Call Trace: dump_stack+0xee/0x15c print_address_description+0x1e/0x2dc kasan_report+0x188/0x1ce ? clk_notifier_register+0xab/0x230 ? clk_prepare_lock+0x15/0x7b ? clk_notifier_register+0xab/0x230 clk_notifier_register+0xab/0x230 dw8250_probe+0xc01/0x10d4 ... Memory state around the buggy address: ffffffffa0d10480: 00 00 00 00 00 03 f9 f9 f9 f9 f9 f9 00 00 00 00 ffffffffa0d10500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f9 f9 >ffffffffa0d10580: f9 f9 f9 f9 00 00 00 00 00 00 00 00 00 00 00 00 ^ ffffffffa0d10600: 00 00 00 00 00 00 f9 f9 f9 f9 f9 f9 00 00 00 00 ffffffffa0d10680: 00 00 00 00 00 00 00 00 f9 f9 f9 f9 00 00 00 00 ================================================================== Fixes: b2476490ef11 ("clk: introduce the common clock framework") Reported-by: Lukasz Majczak Signed-off-by: Lukasz Bartosik Link: https://lore.kernel.org/r/20210401225149.18826-1-lb@semihalf.com Signed-off-by: Stephen Boyd --- drivers/clk/clk.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 5052541a0986..16634d5912be 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -4357,20 +4357,19 @@ int clk_notifier_register(struct clk *clk, struct notifier_block *nb) /* search the list of notifiers for this clk */ list_for_each_entry(cn, &clk_notifier_list, node) if (cn->clk == clk) - break; + goto found; /* if clk wasn't in the notifier list, allocate new clk_notifier */ - if (cn->clk != clk) { - cn = kzalloc(sizeof(*cn), GFP_KERNEL); - if (!cn) - goto out; + cn = kzalloc(sizeof(*cn), GFP_KERNEL); + if (!cn) + goto out; - cn->clk = clk; - srcu_init_notifier_head(&cn->notifier_head); + cn->clk = clk; + srcu_init_notifier_head(&cn->notifier_head); - list_add(&cn->node, &clk_notifier_list); - } + list_add(&cn->node, &clk_notifier_list); +found: ret = srcu_notifier_chain_register(&cn->notifier_head, nb); clk->core->notifier_count++; -- cgit v1.2.3 From 7045465500e465b09f09d6e5bdc260a9f1aab97b Mon Sep 17 00:00:00 2001 From: Lukasz Bartosik Date: Fri, 2 Apr 2021 00:51:49 +0200 Subject: clk: fix invalid usage of list cursor in unregister Fix invalid usage of a list_for_each_entry cursor in clk_notifier_unregister(). When list is empty or if the list is completely traversed (without breaking from the loop on one of the entries) then the list cursor does not point to a valid entry and therefore should not be used. The patch fixes a logical bug that hasn't been seen in pratice however it is analogus to the bug fixed in clk_notifier_register(). The issue was dicovered when running 5.12-rc1 kernel on x86_64 with KASAN enabled: BUG: KASAN: global-out-of-bounds in clk_notifier_register+0xab/0x230 Read of size 8 at addr ffffffffa0d10588 by task swapper/0/1 CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc1 #1 Hardware name: Google Caroline/Caroline, BIOS Google_Caroline.7820.430.0 07/20/2018 Call Trace: dump_stack+0xee/0x15c print_address_description+0x1e/0x2dc kasan_report+0x188/0x1ce ? clk_notifier_register+0xab/0x230 ? clk_prepare_lock+0x15/0x7b ? clk_notifier_register+0xab/0x230 clk_notifier_register+0xab/0x230 dw8250_probe+0xc01/0x10d4 ... Memory state around the buggy address: ffffffffa0d10480: 00 00 00 00 00 03 f9 f9 f9 f9 f9 f9 00 00 00 00 ffffffffa0d10500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f9 f9 >ffffffffa0d10580: f9 f9 f9 f9 00 00 00 00 00 00 00 00 00 00 00 00 ^ ffffffffa0d10600: 00 00 00 00 00 00 f9 f9 f9 f9 f9 f9 00 00 00 00 ffffffffa0d10680: 00 00 00 00 00 00 00 00 f9 f9 f9 f9 00 00 00 00 ================================================================== Fixes: b2476490ef11 ("clk: introduce the common clock framework") Reported-by: Lukasz Majczak Signed-off-by: Lukasz Bartosik Link: https://lore.kernel.org/r/20210401225149.18826-2-lb@semihalf.com Signed-off-by: Stephen Boyd --- drivers/clk/clk.c | 30 +++++++++++++----------------- 1 file changed, 13 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 16634d5912be..39cfc6c6a8d2 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -4394,32 +4394,28 @@ EXPORT_SYMBOL_GPL(clk_notifier_register); */ int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb) { - struct clk_notifier *cn = NULL; - int ret = -EINVAL; + struct clk_notifier *cn; + int ret = -ENOENT; if (!clk || !nb) return -EINVAL; clk_prepare_lock(); - list_for_each_entry(cn, &clk_notifier_list, node) - if (cn->clk == clk) - break; - - if (cn->clk == clk) { - ret = srcu_notifier_chain_unregister(&cn->notifier_head, nb); + list_for_each_entry(cn, &clk_notifier_list, node) { + if (cn->clk == clk) { + ret = srcu_notifier_chain_unregister(&cn->notifier_head, nb); - clk->core->notifier_count--; + clk->core->notifier_count--; - /* XXX the notifier code should handle this better */ - if (!cn->notifier_head.head) { - srcu_cleanup_notifier_head(&cn->notifier_head); - list_del(&cn->node); - kfree(cn); + /* XXX the notifier code should handle this better */ + if (!cn->notifier_head.head) { + srcu_cleanup_notifier_head(&cn->notifier_head); + list_del(&cn->node); + kfree(cn); + } + break; } - - } else { - ret = -ENOENT; } clk_prepare_unlock(); -- cgit v1.2.3 From 1683f7de65dbf0a2c6a7d639173fe92430a28930 Mon Sep 17 00:00:00 2001 From: Zhen Lei Date: Wed, 31 Mar 2021 15:06:43 +0200 Subject: soc: litex: Remove duplicated header file inclusion The header file is already included above and can be removed here. Signed-off-by: Zhen Lei Signed-off-by: Mateusz Holenko Signed-off-by: Stafford Horne --- drivers/soc/litex/litex_soc_ctrl.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/soc/litex/litex_soc_ctrl.c b/drivers/soc/litex/litex_soc_ctrl.c index 6268bfa7f0d6..c3e379a990f2 100644 --- a/drivers/soc/litex/litex_soc_ctrl.c +++ b/drivers/soc/litex/litex_soc_ctrl.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include -- cgit v1.2.3 From 829933ef05a951c8ff140e814656d73e74915faf Mon Sep 17 00:00:00 2001 From: Zheyu Ma Date: Sat, 3 Apr 2021 06:58:36 +0000 Subject: firewire: nosy: Fix a use-after-free bug in nosy_ioctl() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit For each device, the nosy driver allocates a pcilynx structure. A use-after-free might happen in the following scenario: 1. Open nosy device for the first time and call ioctl with command NOSY_IOC_START, then a new client A will be malloced and added to doubly linked list. 2. Open nosy device for the second time and call ioctl with command NOSY_IOC_START, then a new client B will be malloced and added to doubly linked list. 3. Call ioctl with command NOSY_IOC_START for client A, then client A will be readded to the doubly linked list. Now the doubly linked list is messed up. 4. Close the first nosy device and nosy_release will be called. In nosy_release, client A will be unlinked and freed. 5. Close the second nosy device, and client A will be referenced, resulting in UAF. The root cause of this bug is that the element in the doubly linked list is reentered into the list. Fix this bug by adding a check before inserting a client. If a client is already in the linked list, don't insert it. The following KASAN report reveals it: BUG: KASAN: use-after-free in nosy_release+0x1ea/0x210 Write of size 8 at addr ffff888102ad7360 by task poc CPU: 3 PID: 337 Comm: poc Not tainted 5.12.0-rc5+ #6 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 Call Trace: nosy_release+0x1ea/0x210 __fput+0x1e2/0x840 task_work_run+0xe8/0x180 exit_to_user_mode_prepare+0x114/0x120 syscall_exit_to_user_mode+0x1d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae Allocated by task 337: nosy_open+0x154/0x4d0 misc_open+0x2ec/0x410 chrdev_open+0x20d/0x5a0 do_dentry_open+0x40f/0xe80 path_openat+0x1cf9/0x37b0 do_filp_open+0x16d/0x390 do_sys_openat2+0x11d/0x360 __x64_sys_open+0xfd/0x1a0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae Freed by task 337: kfree+0x8f/0x210 nosy_release+0x158/0x210 __fput+0x1e2/0x840 task_work_run+0xe8/0x180 exit_to_user_mode_prepare+0x114/0x120 syscall_exit_to_user_mode+0x1d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff888102ad7300 which belongs to the cache kmalloc-128 of size 128 The buggy address is located 96 bytes inside of 128-byte region [ffff888102ad7300, ffff888102ad7380) [ Modified to use 'list_empty()' inside proper lock - Linus ] Link: https://lore.kernel.org/lkml/1617433116-5930-1-git-send-email-zheyuma97@gmail.com/ Reported-and-tested-by: 马哲宇 (Zheyu Ma) Signed-off-by: Zheyu Ma Cc: Greg Kroah-Hartman Cc: Stefan Richter Signed-off-by: Linus Torvalds --- drivers/firewire/nosy.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/firewire/nosy.c b/drivers/firewire/nosy.c index 5fd6a60b6741..88ed971e32c0 100644 --- a/drivers/firewire/nosy.c +++ b/drivers/firewire/nosy.c @@ -346,6 +346,7 @@ nosy_ioctl(struct file *file, unsigned int cmd, unsigned long arg) struct client *client = file->private_data; spinlock_t *client_list_lock = &client->lynx->client_list_lock; struct nosy_stats stats; + int ret; switch (cmd) { case NOSY_IOC_GET_STATS: @@ -360,11 +361,15 @@ nosy_ioctl(struct file *file, unsigned int cmd, unsigned long arg) return 0; case NOSY_IOC_START: + ret = -EBUSY; spin_lock_irq(client_list_lock); - list_add_tail(&client->link, &client->lynx->client_list); + if (list_empty(&client->link)) { + list_add_tail(&client->link, &client->lynx->client_list); + ret = 0; + } spin_unlock_irq(client_list_lock); - return 0; + return ret; case NOSY_IOC_STOP: spin_lock_irq(client_list_lock); -- cgit v1.2.3 From 4e9c93af7279b059faf5bb1897ee90512b258a12 Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Mon, 29 Mar 2021 19:36:48 -0600 Subject: usbip: add sysfs_lock to synchronize sysfs code paths Fuzzing uncovered race condition between sysfs code paths in usbip drivers. Device connect/disconnect code paths initiated through sysfs interface are prone to races if disconnect happens during connect and vice versa. This problem is common to all drivers while it can be reproduced easily in vhci_hcd. Add a sysfs_lock to usbip_device struct to protect the paths. Use this in vhci_hcd to protect sysfs paths. For a complete fix, usip_host and usip-vudc drivers and the event handler will have to use this lock to protect the paths. These changes will be done in subsequent patches. Cc: stable@vger.kernel.org Reported-and-tested-by: syzbot+a93fba6d384346a761e3@syzkaller.appspotmail.com Signed-off-by: Shuah Khan Link: https://lore.kernel.org/r/b6568f7beae702bbc236a545d3c020106ca75eac.1616807117.git.skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/usbip/usbip_common.h | 3 +++ drivers/usb/usbip/vhci_hcd.c | 1 + drivers/usb/usbip/vhci_sysfs.c | 30 +++++++++++++++++++++++++----- 3 files changed, 29 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/usbip/usbip_common.h b/drivers/usb/usbip/usbip_common.h index d60ce17d3dd2..ea2a20e6d27d 100644 --- a/drivers/usb/usbip/usbip_common.h +++ b/drivers/usb/usbip/usbip_common.h @@ -263,6 +263,9 @@ struct usbip_device { /* lock for status */ spinlock_t lock; + /* mutex for synchronizing sysfs store paths */ + struct mutex sysfs_lock; + int sockfd; struct socket *tcp_socket; diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c index a20a8380ca0c..4ba6bcdaa8e9 100644 --- a/drivers/usb/usbip/vhci_hcd.c +++ b/drivers/usb/usbip/vhci_hcd.c @@ -1101,6 +1101,7 @@ static void vhci_device_init(struct vhci_device *vdev) vdev->ud.side = USBIP_VHCI; vdev->ud.status = VDEV_ST_NULL; spin_lock_init(&vdev->ud.lock); + mutex_init(&vdev->ud.sysfs_lock); INIT_LIST_HEAD(&vdev->priv_rx); INIT_LIST_HEAD(&vdev->priv_tx); diff --git a/drivers/usb/usbip/vhci_sysfs.c b/drivers/usb/usbip/vhci_sysfs.c index c4b4256e5dad..e2847cd3e6e3 100644 --- a/drivers/usb/usbip/vhci_sysfs.c +++ b/drivers/usb/usbip/vhci_sysfs.c @@ -185,6 +185,8 @@ static int vhci_port_disconnect(struct vhci_hcd *vhci_hcd, __u32 rhport) usbip_dbg_vhci_sysfs("enter\n"); + mutex_lock(&vdev->ud.sysfs_lock); + /* lock */ spin_lock_irqsave(&vhci->lock, flags); spin_lock(&vdev->ud.lock); @@ -195,6 +197,7 @@ static int vhci_port_disconnect(struct vhci_hcd *vhci_hcd, __u32 rhport) /* unlock */ spin_unlock(&vdev->ud.lock); spin_unlock_irqrestore(&vhci->lock, flags); + mutex_unlock(&vdev->ud.sysfs_lock); return -EINVAL; } @@ -205,6 +208,8 @@ static int vhci_port_disconnect(struct vhci_hcd *vhci_hcd, __u32 rhport) usbip_event_add(&vdev->ud, VDEV_EVENT_DOWN); + mutex_unlock(&vdev->ud.sysfs_lock); + return 0; } @@ -349,30 +354,36 @@ static ssize_t attach_store(struct device *dev, struct device_attribute *attr, else vdev = &vhci->vhci_hcd_hs->vdev[rhport]; + mutex_lock(&vdev->ud.sysfs_lock); + /* Extract socket from fd. */ socket = sockfd_lookup(sockfd, &err); if (!socket) { dev_err(dev, "failed to lookup sock"); - return -EINVAL; + err = -EINVAL; + goto unlock_mutex; } if (socket->type != SOCK_STREAM) { dev_err(dev, "Expecting SOCK_STREAM - found %d", socket->type); sockfd_put(socket); - return -EINVAL; + err = -EINVAL; + goto unlock_mutex; } /* create threads before locking */ tcp_rx = kthread_create(vhci_rx_loop, &vdev->ud, "vhci_rx"); if (IS_ERR(tcp_rx)) { sockfd_put(socket); - return -EINVAL; + err = -EINVAL; + goto unlock_mutex; } tcp_tx = kthread_create(vhci_tx_loop, &vdev->ud, "vhci_tx"); if (IS_ERR(tcp_tx)) { kthread_stop(tcp_rx); sockfd_put(socket); - return -EINVAL; + err = -EINVAL; + goto unlock_mutex; } /* get task structs now */ @@ -397,7 +408,8 @@ static ssize_t attach_store(struct device *dev, struct device_attribute *attr, * Will be retried from userspace * if there's another free port. */ - return -EBUSY; + err = -EBUSY; + goto unlock_mutex; } dev_info(dev, "pdev(%u) rhport(%u) sockfd(%d)\n", @@ -423,7 +435,15 @@ static ssize_t attach_store(struct device *dev, struct device_attribute *attr, rh_port_connect(vdev, speed); + dev_info(dev, "Device attached\n"); + + mutex_unlock(&vdev->ud.sysfs_lock); + return count; + +unlock_mutex: + mutex_unlock(&vdev->ud.sysfs_lock); + return err; } static DEVICE_ATTR_WO(attach); -- cgit v1.2.3 From 9dbf34a834563dada91366c2ac266f32ff34641a Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Mon, 29 Mar 2021 19:36:49 -0600 Subject: usbip: stub-dev synchronize sysfs code paths Fuzzing uncovered race condition between sysfs code paths in usbip drivers. Device connect/disconnect code paths initiated through sysfs interface are prone to races if disconnect happens during connect and vice versa. Use sysfs_lock to protect sysfs paths in stub-dev. Cc: stable@vger.kernel.org Reported-and-tested-by: syzbot+a93fba6d384346a761e3@syzkaller.appspotmail.com Signed-off-by: Shuah Khan Link: https://lore.kernel.org/r/2b182f3561b4a065bf3bf6dce3b0e9944ba17b3f.1616807117.git.skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/usbip/stub_dev.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/usbip/stub_dev.c b/drivers/usb/usbip/stub_dev.c index 8f1de1fbbeed..d8d3892e5a69 100644 --- a/drivers/usb/usbip/stub_dev.c +++ b/drivers/usb/usbip/stub_dev.c @@ -63,6 +63,7 @@ static ssize_t usbip_sockfd_store(struct device *dev, struct device_attribute *a dev_info(dev, "stub up\n"); + mutex_lock(&sdev->ud.sysfs_lock); spin_lock_irq(&sdev->ud.lock); if (sdev->ud.status != SDEV_ST_AVAILABLE) { @@ -87,13 +88,13 @@ static ssize_t usbip_sockfd_store(struct device *dev, struct device_attribute *a tcp_rx = kthread_create(stub_rx_loop, &sdev->ud, "stub_rx"); if (IS_ERR(tcp_rx)) { sockfd_put(socket); - return -EINVAL; + goto unlock_mutex; } tcp_tx = kthread_create(stub_tx_loop, &sdev->ud, "stub_tx"); if (IS_ERR(tcp_tx)) { kthread_stop(tcp_rx); sockfd_put(socket); - return -EINVAL; + goto unlock_mutex; } /* get task structs now */ @@ -112,6 +113,8 @@ static ssize_t usbip_sockfd_store(struct device *dev, struct device_attribute *a wake_up_process(sdev->ud.tcp_rx); wake_up_process(sdev->ud.tcp_tx); + mutex_unlock(&sdev->ud.sysfs_lock); + } else { dev_info(dev, "stub down\n"); @@ -122,6 +125,7 @@ static ssize_t usbip_sockfd_store(struct device *dev, struct device_attribute *a spin_unlock_irq(&sdev->ud.lock); usbip_event_add(&sdev->ud, SDEV_EVENT_DOWN); + mutex_unlock(&sdev->ud.sysfs_lock); } return count; @@ -130,6 +134,8 @@ sock_err: sockfd_put(socket); err: spin_unlock_irq(&sdev->ud.lock); +unlock_mutex: + mutex_unlock(&sdev->ud.sysfs_lock); return -EINVAL; } static DEVICE_ATTR_WO(usbip_sockfd); @@ -270,6 +276,7 @@ static struct stub_device *stub_device_alloc(struct usb_device *udev) sdev->ud.side = USBIP_STUB; sdev->ud.status = SDEV_ST_AVAILABLE; spin_lock_init(&sdev->ud.lock); + mutex_init(&sdev->ud.sysfs_lock); sdev->ud.tcp_socket = NULL; sdev->ud.sockfd = -1; -- cgit v1.2.3 From bd8b82042269a95db48074b8bb400678dbac1815 Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Mon, 29 Mar 2021 19:36:50 -0600 Subject: usbip: vudc synchronize sysfs code paths Fuzzing uncovered race condition between sysfs code paths in usbip drivers. Device connect/disconnect code paths initiated through sysfs interface are prone to races if disconnect happens during connect and vice versa. Use sysfs_lock to protect sysfs paths in vudc. Cc: stable@vger.kernel.org Reported-and-tested-by: syzbot+a93fba6d384346a761e3@syzkaller.appspotmail.com Signed-off-by: Shuah Khan Link: https://lore.kernel.org/r/caabcf3fc87bdae970509b5ff32d05bb7ce2fb15.1616807117.git.skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/usbip/vudc_dev.c | 1 + drivers/usb/usbip/vudc_sysfs.c | 5 +++++ 2 files changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/usbip/vudc_dev.c b/drivers/usb/usbip/vudc_dev.c index c8eeabdd9b56..2bc428f2e261 100644 --- a/drivers/usb/usbip/vudc_dev.c +++ b/drivers/usb/usbip/vudc_dev.c @@ -572,6 +572,7 @@ static int init_vudc_hw(struct vudc *udc) init_waitqueue_head(&udc->tx_waitq); spin_lock_init(&ud->lock); + mutex_init(&ud->sysfs_lock); ud->status = SDEV_ST_AVAILABLE; ud->side = USBIP_VUDC; diff --git a/drivers/usb/usbip/vudc_sysfs.c b/drivers/usb/usbip/vudc_sysfs.c index 7383a543c6d1..f7633ee655a1 100644 --- a/drivers/usb/usbip/vudc_sysfs.c +++ b/drivers/usb/usbip/vudc_sysfs.c @@ -112,6 +112,7 @@ static ssize_t usbip_sockfd_store(struct device *dev, dev_err(dev, "no device"); return -ENODEV; } + mutex_lock(&udc->ud.sysfs_lock); spin_lock_irqsave(&udc->lock, flags); /* Don't export what we don't have */ if (!udc->driver || !udc->pullup) { @@ -187,6 +188,8 @@ static ssize_t usbip_sockfd_store(struct device *dev, wake_up_process(udc->ud.tcp_rx); wake_up_process(udc->ud.tcp_tx); + + mutex_unlock(&udc->ud.sysfs_lock); return count; } else { @@ -207,6 +210,7 @@ static ssize_t usbip_sockfd_store(struct device *dev, } spin_unlock_irqrestore(&udc->lock, flags); + mutex_unlock(&udc->ud.sysfs_lock); return count; @@ -216,6 +220,7 @@ unlock_ud: spin_unlock_irq(&udc->ud.lock); unlock: spin_unlock_irqrestore(&udc->lock, flags); + mutex_unlock(&udc->ud.sysfs_lock); return ret; } -- cgit v1.2.3 From 363eaa3a450abb4e63bd6e3ad79d1f7a0f717814 Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Mon, 29 Mar 2021 19:36:51 -0600 Subject: usbip: synchronize event handler with sysfs code paths Fuzzing uncovered race condition between sysfs code paths in usbip drivers. Device connect/disconnect code paths initiated through sysfs interface are prone to races if disconnect happens during connect and vice versa. Use sysfs_lock to synchronize event handler with sysfs paths in usbip drivers. Cc: stable@vger.kernel.org Reported-and-tested-by: syzbot+a93fba6d384346a761e3@syzkaller.appspotmail.com Signed-off-by: Shuah Khan Link: https://lore.kernel.org/r/c5c8723d3f29dfe3d759cfaafa7dd16b0dfe2918.1616807117.git.skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/usbip/usbip_event.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/usbip/usbip_event.c b/drivers/usb/usbip/usbip_event.c index 5d88917c9631..086ca76dd053 100644 --- a/drivers/usb/usbip/usbip_event.c +++ b/drivers/usb/usbip/usbip_event.c @@ -70,6 +70,7 @@ static void event_handler(struct work_struct *work) while ((ud = get_event()) != NULL) { usbip_dbg_eh("pending event %lx\n", ud->event); + mutex_lock(&ud->sysfs_lock); /* * NOTE: shutdown must come first. * Shutdown the device. @@ -90,6 +91,7 @@ static void event_handler(struct work_struct *work) ud->eh_ops.unusable(ud); unset_event(ud, USBIP_EH_UNUSABLE); } + mutex_unlock(&ud->sysfs_lock); wake_up(&ud->eh_waitq); } -- cgit v1.2.3 From eed6e41813deb9ee622cd9242341f21430d7789f Mon Sep 17 00:00:00 2001 From: Saravana Kannan Date: Thu, 1 Apr 2021 21:03:40 -0700 Subject: driver core: Fix locking bug in deferred_probe_timeout_work_func() list_for_each_entry_safe() is only useful if we are deleting nodes in a linked list within the loop. It doesn't protect against other threads adding/deleting nodes to the list in parallel. We need to grab deferred_probe_mutex when traversing the deferred_probe_pending_list. Cc: stable@vger.kernel.org Fixes: 25b4e70dcce9 ("driver core: allow stopping deferred probe after init") Signed-off-by: Saravana Kannan Link: https://lore.kernel.org/r/20210402040342.2944858-2-saravanak@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/base/dd.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/base/dd.c b/drivers/base/dd.c index e2cf3b29123e..37a5e5f8b221 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -292,14 +292,16 @@ int driver_deferred_probe_check_state(struct device *dev) static void deferred_probe_timeout_work_func(struct work_struct *work) { - struct device_private *private, *p; + struct device_private *p; driver_deferred_probe_timeout = 0; driver_deferred_probe_trigger(); flush_work(&deferred_probe_work); - list_for_each_entry_safe(private, p, &deferred_probe_pending_list, deferred_probe) - dev_info(private->device, "deferred probe pending\n"); + mutex_lock(&deferred_probe_mutex); + list_for_each_entry(p, &deferred_probe_pending_list, deferred_probe) + dev_info(p->device, "deferred probe pending\n"); + mutex_unlock(&deferred_probe_mutex); wake_up_all(&probe_timeout_waitqueue); } static DECLARE_DELAYED_WORK(deferred_probe_timeout_work, deferred_probe_timeout_work_func); -- cgit v1.2.3 From 5e729bc54bda705f64941008b018b4e41a4322bf Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Wed, 31 Mar 2021 14:05:10 +0300 Subject: i2c: designware: Adjust bus_freq_hz when refuse high speed mode set When hardware doesn't support High Speed Mode, we forget bus_freq_hz timing adjustment. This makes the timings and real registers being unsynchronized. Adjust bus_freq_hz when refuse high speed mode set. Fixes: b6e67145f149 ("i2c: designware: Enable high speed mode") Reported-by: "Song Bao Hua (Barry Song)" Signed-off-by: Andy Shevchenko Reviewed-by: Barry Song Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-designware-master.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c index dd27b9dbe931..873ef38eb1c8 100644 --- a/drivers/i2c/busses/i2c-designware-master.c +++ b/drivers/i2c/busses/i2c-designware-master.c @@ -129,6 +129,7 @@ static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev) if ((comp_param1 & DW_IC_COMP_PARAM_1_SPEED_MODE_MASK) != DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH) { dev_err(dev->dev, "High Speed not supported!\n"); + t->bus_freq_hz = I2C_MAX_FAST_MODE_FREQ; dev->master_cfg &= ~DW_IC_CON_SPEED_MASK; dev->master_cfg |= DW_IC_CON_SPEED_FAST; dev->hs_hcnt = 0; -- cgit v1.2.3 From 9a6aaf61487e6d96ce0bf9b84a784c528dbf6e5e Mon Sep 17 00:00:00 2001 From: Salil Mehta Date: Mon, 5 Apr 2021 18:06:44 +0100 Subject: net: hns3: Remove the left over redundant check & assignment This removes the left over check and assignment which is no longer used anywhere in the function and should have been removed as part of the below mentioned patch. Fixes: 012fcb52f67c ("net: hns3: activate reset timer when calling reset_event") Signed-off-by: Salil Mehta Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index e3f81c7e0ce7..58d210bbb311 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -3966,7 +3966,6 @@ static void hclge_reset_event(struct pci_dev *pdev, struct hnae3_handle *handle) * normalcy is to reset. * 2. A new reset request from the stack due to timeout * - * For the first case,error event might not have ae handle available. * check if this is a new reset request and we are not here just because * last reset attempt did not succeed and watchdog hit us again. We will * know this if last reset request did not occur very recently (watchdog @@ -3976,8 +3975,6 @@ static void hclge_reset_event(struct pci_dev *pdev, struct hnae3_handle *handle) * want to make sure we throttle the reset request. Therefore, we will * not allow it again before 3*HZ times. */ - if (!handle) - handle = &hdev->vport[0].nic; if (time_before(jiffies, (hdev->last_reset_time + HCLGE_RESET_INTERVAL))) { -- cgit v1.2.3 From 0600771fa6b231e801ba1ff5d7adfcf7659dbbf3 Mon Sep 17 00:00:00 2001 From: Salil Mehta Date: Mon, 5 Apr 2021 18:06:45 +0100 Subject: net: hns3: Remove un-necessary 'else-if' in the hclge_reset_event() Code to defer the reset(which caps the frequency of the reset) schedules the timer and returns. Hence, following 'else-if' looks un-necessary. Fixes: 9de0b86f6444 ("net: hns3: Prevent to request reset frequently") Signed-off-by: Salil Mehta Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index 58d210bbb311..2dd2af269b46 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -3980,7 +3980,9 @@ static void hclge_reset_event(struct pci_dev *pdev, struct hnae3_handle *handle) HCLGE_RESET_INTERVAL))) { mod_timer(&hdev->reset_timer, jiffies + HCLGE_RESET_INTERVAL); return; - } else if (hdev->default_reset_request) { + } + + if (hdev->default_reset_request) { hdev->reset_level = hclge_get_reset_level(ae_dev, &hdev->default_reset_request); -- cgit v1.2.3 From 65df7d1986a1909a0869419919e7d9c78d70407e Mon Sep 17 00:00:00 2001 From: Viswas G Date: Fri, 2 Apr 2021 11:12:12 +0530 Subject: scsi: pm80xx: Fix chip initialization failure Inbound and outbound queues were not properly configured and that lead to MPI configuration failure. Fixes: 05c6c029a44d ("scsi: pm80xx: Increase number of supported queues") Cc: stable@vger.kernel.org # 5.10+ Link: https://lore.kernel.org/r/20210402054212.17834-1-Viswas.G@microchip.com.com Reported-and-tested-by: Ash Izat Signed-off-by: Viswas G Signed-off-by: Martin K. Petersen --- drivers/scsi/pm8001/pm8001_hwi.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index 49bf2f70a470..31e5455d280c 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -223,7 +223,7 @@ static void init_default_table_values(struct pm8001_hba_info *pm8001_ha) PM8001_EVENT_LOG_SIZE; pm8001_ha->main_cfg_tbl.pm8001_tbl.iop_event_log_option = 0x01; pm8001_ha->main_cfg_tbl.pm8001_tbl.fatal_err_interrupt = 0x01; - for (i = 0; i < PM8001_MAX_INB_NUM; i++) { + for (i = 0; i < pm8001_ha->max_q_num; i++) { pm8001_ha->inbnd_q_tbl[i].element_pri_size_cnt = PM8001_MPI_QUEUE | (pm8001_ha->iomb_size << 16) | (0x00<<30); pm8001_ha->inbnd_q_tbl[i].upper_base_addr = @@ -249,7 +249,7 @@ static void init_default_table_values(struct pm8001_hba_info *pm8001_ha) pm8001_ha->inbnd_q_tbl[i].producer_idx = 0; pm8001_ha->inbnd_q_tbl[i].consumer_index = 0; } - for (i = 0; i < PM8001_MAX_OUTB_NUM; i++) { + for (i = 0; i < pm8001_ha->max_q_num; i++) { pm8001_ha->outbnd_q_tbl[i].element_size_cnt = PM8001_MPI_QUEUE | (pm8001_ha->iomb_size << 16) | (0x01<<30); pm8001_ha->outbnd_q_tbl[i].upper_base_addr = @@ -671,9 +671,9 @@ static int pm8001_chip_init(struct pm8001_hba_info *pm8001_ha) read_outbnd_queue_table(pm8001_ha); /* update main config table ,inbound table and outbound table */ update_main_config_table(pm8001_ha); - for (i = 0; i < PM8001_MAX_INB_NUM; i++) + for (i = 0; i < pm8001_ha->max_q_num; i++) update_inbnd_queue_table(pm8001_ha, i); - for (i = 0; i < PM8001_MAX_OUTB_NUM; i++) + for (i = 0; i < pm8001_ha->max_q_num; i++) update_outbnd_queue_table(pm8001_ha, i); /* 8081 controller donot require these operations */ if (deviceid != 0x8081 && deviceid != 0x0042) { -- cgit v1.2.3 From 0352c3d3959a6cf543075b88c7e662fd3546f12e Mon Sep 17 00:00:00 2001 From: Roman Bolshakov Date: Sun, 4 Apr 2021 00:54:15 +0300 Subject: scsi: target: iscsi: Fix zero tag inside a trace event target_sequencer_start event is triggered inside target_cmd_init_cdb(). se_cmd.tag is not initialized with ITT at the moment so the event always prints zero tag. Link: https://lore.kernel.org/r/20210403215415.95077-1-r.bolshakov@yadro.com Cc: stable@vger.kernel.org # 5.10+ Reviewed-by: Mike Christie Signed-off-by: Roman Bolshakov Signed-off-by: Martin K. Petersen --- drivers/target/iscsi/iscsi_target.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index d0e7ed8f28cc..e5c443bfbdf9 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -1166,6 +1166,7 @@ int iscsit_setup_scsi_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd, target_get_sess_cmd(&cmd->se_cmd, true); + cmd->se_cmd.tag = (__force u32)cmd->init_task_tag; cmd->sense_reason = target_cmd_init_cdb(&cmd->se_cmd, hdr->cdb); if (cmd->sense_reason) { if (cmd->sense_reason == TCM_OUT_OF_RESOURCES) { @@ -1180,8 +1181,6 @@ int iscsit_setup_scsi_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd, if (cmd->sense_reason) goto attach_cmd; - /* only used for printks or comparing with ->ref_task_tag */ - cmd->se_cmd.tag = (__force u32)cmd->init_task_tag; cmd->sense_reason = target_cmd_parse_cdb(&cmd->se_cmd); if (cmd->sense_reason) goto attach_cmd; -- cgit v1.2.3 From 5cd0f6f57639c5afbb36100c69281fee82c95ee7 Mon Sep 17 00:00:00 2001 From: Martin Wilck Date: Thu, 1 Apr 2021 11:11:05 +0200 Subject: scsi: scsi_transport_srp: Don't block target in SRP_PORT_LOST state rport_dev_loss_timedout() sets the rport state to SRP_PORT_LOST and the SCSI target state to SDEV_TRANSPORT_OFFLINE. If this races with srp_reconnect_work(), a warning is printed: Mar 27 18:48:07 ictm1604s01h4 kernel: dev_loss_tmo expired for SRP port-18:1 / host18. Mar 27 18:48:07 ictm1604s01h4 kernel: ------------[ cut here ]------------ Mar 27 18:48:07 ictm1604s01h4 kernel: scsi_internal_device_block(18:0:0:100) failed: ret = -22 Mar 27 18:48:07 ictm1604s01h4 kernel: Call Trace: Mar 27 18:48:07 ictm1604s01h4 kernel: ? scsi_target_unblock+0x50/0x50 [scsi_mod] Mar 27 18:48:07 ictm1604s01h4 kernel: starget_for_each_device+0x80/0xb0 [scsi_mod] Mar 27 18:48:07 ictm1604s01h4 kernel: target_block+0x24/0x30 [scsi_mod] Mar 27 18:48:07 ictm1604s01h4 kernel: device_for_each_child+0x57/0x90 Mar 27 18:48:07 ictm1604s01h4 kernel: srp_reconnect_rport+0xe4/0x230 [scsi_transport_srp] Mar 27 18:48:07 ictm1604s01h4 kernel: srp_reconnect_work+0x40/0xc0 [scsi_transport_srp] Avoid this by not trying to block targets for rports in SRP_PORT_LOST state. Link: https://lore.kernel.org/r/20210401091105.8046-1-mwilck@suse.com Reviewed-by: Bart Van Assche Signed-off-by: Martin Wilck Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_transport_srp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_transport_srp.c b/drivers/scsi/scsi_transport_srp.c index 1e939a2a387f..98a34ed10f1a 100644 --- a/drivers/scsi/scsi_transport_srp.c +++ b/drivers/scsi/scsi_transport_srp.c @@ -541,7 +541,7 @@ int srp_reconnect_rport(struct srp_rport *rport) res = mutex_lock_interruptible(&rport->mutex); if (res) goto out; - if (rport->state != SRP_RPORT_FAIL_FAST) + if (rport->state != SRP_RPORT_FAIL_FAST && rport->state != SRP_RPORT_LOST) /* * sdev state must be SDEV_TRANSPORT_OFFLINE, transition * to SDEV_BLOCK is illegal. Calling scsi_target_unblock() -- cgit v1.2.3 From 9054284e8846b0105aad43a4e7174ca29fffbc44 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Tue, 6 Apr 2021 11:32:52 +0200 Subject: parisc: parisc-agp requires SBA IOMMU driver Add a dependency to the SBA IOMMU driver to avoid: ERROR: modpost: "sba_list" [drivers/char/agp/parisc-agp.ko] undefined! Reported-by: kernel test robot Cc: stable@vger.kernel.org Signed-off-by: Helge Deller --- drivers/char/agp/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/agp/Kconfig b/drivers/char/agp/Kconfig index a086dd34f932..4f501e4842ab 100644 --- a/drivers/char/agp/Kconfig +++ b/drivers/char/agp/Kconfig @@ -125,7 +125,7 @@ config AGP_HP_ZX1 config AGP_PARISC tristate "HP Quicksilver AGP support" - depends on AGP && PARISC && 64BIT + depends on AGP && PARISC && 64BIT && IOMMU_SBA help This option gives you AGP GART support for the HP Quicksilver AGP bus adapter on HP PA-RISC machines (Ok, just on the C8000 -- cgit v1.2.3 From 07cc40fec9a85e669ea12e161a438d2cbd76f1ed Mon Sep 17 00:00:00 2001 From: Luca Coelho Date: Fri, 26 Mar 2021 12:57:17 +0200 Subject: iwlwifi: fix 11ax disabled bit in the regulatory capability flags When version 2 of the regulatory capability flags API was implemented, the flag to disable 11ax was defined as bit 13, but this was later changed and the bit remained as bit 10, like in version 1. This was never changed in the driver, so we were checking for the wrong bit in newer devices. Fix it. Signed-off-by: Luca Coelho Fixes: e27c506a985c ("iwlwifi: regulatory: regulatory capabilities api change") Signed-off-by: Luca Coelho Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/iwlwifi.20210326125611.6d28516b59cd.Id0248d5e4662695254f49ce37b0268834ed52918@changeid --- drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c b/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c index af684f80b0cc..c5a1e84dc1ab 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c @@ -232,7 +232,7 @@ enum iwl_reg_capa_flags_v2 { REG_CAPA_V2_MCS_9_ALLOWED = BIT(6), REG_CAPA_V2_WEATHER_DISABLED = BIT(7), REG_CAPA_V2_40MHZ_ALLOWED = BIT(8), - REG_CAPA_V2_11AX_DISABLED = BIT(13), + REG_CAPA_V2_11AX_DISABLED = BIT(10), }; /* -- cgit v1.2.3 From 25628bc08d4526d3673ca7d039eb636aa9006076 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 26 Mar 2021 12:57:18 +0200 Subject: iwlwifi: pcie: properly set LTR workarounds on 22000 devices As the context info gen3 code is only called for >=AX210 devices (from iwl_trans_pcie_gen2_start_fw()) the code there to set LTR on 22000 devices cannot actually do anything (22000 < AX210). Fix this by moving the LTR code to iwl_trans_pcie_gen2_start_fw() where it can handle both devices. This then requires that we kick the firmware only after that rather than doing it from the context info code. Note that this again had a dead branch in gen3 code, which I've removed here. Signed-off-by: Johannes Berg Fixes: ed0022da8bd9 ("iwlwifi: pcie: set LTR on more devices") Signed-off-by: Luca Coelho Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/iwlwifi.20210326125611.675486178ed1.Ib61463aba6920645059e366dcdca4c4c77f0ff58@changeid --- .../wireless/intel/iwlwifi/pcie/ctxt-info-gen3.c | 31 +------------------ .../net/wireless/intel/iwlwifi/pcie/ctxt-info.c | 3 +- .../net/wireless/intel/iwlwifi/pcie/trans-gen2.c | 35 ++++++++++++++++++++++ 3 files changed, 37 insertions(+), 32 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/ctxt-info-gen3.c b/drivers/net/wireless/intel/iwlwifi/pcie/ctxt-info-gen3.c index 8fba190e84cf..cecc32e7dbe8 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/ctxt-info-gen3.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/ctxt-info-gen3.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause /* - * Copyright (C) 2018-2020 Intel Corporation + * Copyright (C) 2018-2021 Intel Corporation */ #include "iwl-trans.h" #include "iwl-fh.h" @@ -75,15 +75,6 @@ int iwl_pcie_ctxt_info_gen3_init(struct iwl_trans *trans, const struct fw_img *fw) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - u32 ltr_val = CSR_LTR_LONG_VAL_AD_NO_SNOOP_REQ | - u32_encode_bits(CSR_LTR_LONG_VAL_AD_SCALE_USEC, - CSR_LTR_LONG_VAL_AD_NO_SNOOP_SCALE) | - u32_encode_bits(250, - CSR_LTR_LONG_VAL_AD_NO_SNOOP_VAL) | - CSR_LTR_LONG_VAL_AD_SNOOP_REQ | - u32_encode_bits(CSR_LTR_LONG_VAL_AD_SCALE_USEC, - CSR_LTR_LONG_VAL_AD_SNOOP_SCALE) | - u32_encode_bits(250, CSR_LTR_LONG_VAL_AD_SNOOP_VAL); struct iwl_context_info_gen3 *ctxt_info_gen3; struct iwl_prph_scratch *prph_scratch; struct iwl_prph_scratch_ctrl_cfg *prph_sc_ctrl; @@ -217,26 +208,6 @@ int iwl_pcie_ctxt_info_gen3_init(struct iwl_trans *trans, iwl_set_bit(trans, CSR_CTXT_INFO_BOOT_CTRL, CSR_AUTO_FUNC_BOOT_ENA); - /* - * To workaround hardware latency issues during the boot process, - * initialize the LTR to ~250 usec (see ltr_val above). - * The firmware initializes this again later (to a smaller value). - */ - if ((trans->trans_cfg->device_family == IWL_DEVICE_FAMILY_AX210 || - trans->trans_cfg->device_family == IWL_DEVICE_FAMILY_22000) && - !trans->trans_cfg->integrated) { - iwl_write32(trans, CSR_LTR_LONG_VAL_AD, ltr_val); - } else if (trans->trans_cfg->integrated && - trans->trans_cfg->device_family == IWL_DEVICE_FAMILY_22000) { - iwl_write_prph(trans, HPM_MAC_LTR_CSR, HPM_MAC_LRT_ENABLE_ALL); - iwl_write_prph(trans, HPM_UMAC_LTR, ltr_val); - } - - if (trans->trans_cfg->device_family >= IWL_DEVICE_FAMILY_AX210) - iwl_write_umac_prph(trans, UREG_CPU_INIT_RUN, 1); - else - iwl_set_bit(trans, CSR_GP_CNTRL, CSR_AUTO_FUNC_INIT); - return 0; err_free_ctxt_info: diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/ctxt-info.c b/drivers/net/wireless/intel/iwlwifi/pcie/ctxt-info.c index d1bb273d6b6d..74ce31fdf45e 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/ctxt-info.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/ctxt-info.c @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause /* * Copyright (C) 2017 Intel Deutschland GmbH - * Copyright (C) 2018-2020 Intel Corporation + * Copyright (C) 2018-2021 Intel Corporation */ #include "iwl-trans.h" #include "iwl-fh.h" @@ -240,7 +240,6 @@ int iwl_pcie_ctxt_info_init(struct iwl_trans *trans, /* kick FW self load */ iwl_write64(trans, CSR_CTXT_INFO_BA, trans_pcie->ctxt_info_dma_addr); - iwl_write_prph(trans, UREG_CPU_INIT_RUN, 1); /* Context info will be released upon alive or failure to get one */ diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c index 497ef3405da3..94ffc1ae484d 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c @@ -266,6 +266,34 @@ void iwl_trans_pcie_gen2_fw_alive(struct iwl_trans *trans, u32 scd_addr) mutex_unlock(&trans_pcie->mutex); } +static void iwl_pcie_set_ltr(struct iwl_trans *trans) +{ + u32 ltr_val = CSR_LTR_LONG_VAL_AD_NO_SNOOP_REQ | + u32_encode_bits(CSR_LTR_LONG_VAL_AD_SCALE_USEC, + CSR_LTR_LONG_VAL_AD_NO_SNOOP_SCALE) | + u32_encode_bits(250, + CSR_LTR_LONG_VAL_AD_NO_SNOOP_VAL) | + CSR_LTR_LONG_VAL_AD_SNOOP_REQ | + u32_encode_bits(CSR_LTR_LONG_VAL_AD_SCALE_USEC, + CSR_LTR_LONG_VAL_AD_SNOOP_SCALE) | + u32_encode_bits(250, CSR_LTR_LONG_VAL_AD_SNOOP_VAL); + + /* + * To workaround hardware latency issues during the boot process, + * initialize the LTR to ~250 usec (see ltr_val above). + * The firmware initializes this again later (to a smaller value). + */ + if ((trans->trans_cfg->device_family == IWL_DEVICE_FAMILY_AX210 || + trans->trans_cfg->device_family == IWL_DEVICE_FAMILY_22000) && + !trans->trans_cfg->integrated) { + iwl_write32(trans, CSR_LTR_LONG_VAL_AD, ltr_val); + } else if (trans->trans_cfg->integrated && + trans->trans_cfg->device_family == IWL_DEVICE_FAMILY_22000) { + iwl_write_prph(trans, HPM_MAC_LTR_CSR, HPM_MAC_LRT_ENABLE_ALL); + iwl_write_prph(trans, HPM_UMAC_LTR, ltr_val); + } +} + int iwl_trans_pcie_gen2_start_fw(struct iwl_trans *trans, const struct fw_img *fw, bool run_in_rfkill) { @@ -332,6 +360,13 @@ int iwl_trans_pcie_gen2_start_fw(struct iwl_trans *trans, if (ret) goto out; + iwl_pcie_set_ltr(trans); + + if (trans->trans_cfg->device_family >= IWL_DEVICE_FAMILY_AX210) + iwl_write_umac_prph(trans, UREG_CPU_INIT_RUN, 1); + else + iwl_write_prph(trans, UREG_CPU_INIT_RUN, 1); + /* re-check RF-Kill state since we may have missed the interrupt */ hw_rfkill = iwl_pcie_check_hw_rf_kill(trans); if (hw_rfkill && !run_in_rfkill) -- cgit v1.2.3 From 97195d3cad852063208a1cd4f4d073459547a415 Mon Sep 17 00:00:00 2001 From: Matt Chen Date: Fri, 26 Mar 2021 12:57:19 +0200 Subject: iwlwifi: add support for Qu with AX201 device Add this specific Samsung AX201 sku to driver so it can be detected and initialized successfully. Signed-off-by: Matt Chen Signed-off-by: Luca Coelho Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/iwlwifi.20210326125611.30b622037714.Id9fd709cf1c8261c097bbfd7453f6476077dcafc@changeid --- drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c index ffaf973dae94..4e2219b46db2 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c @@ -592,6 +592,7 @@ static const struct iwl_dev_info iwl_dev_info_table[] = { IWL_DEV_INFO(0x4DF0, 0x1652, killer1650i_2ax_cfg_qu_b0_hr_b0, NULL), IWL_DEV_INFO(0x4DF0, 0x2074, iwl_ax201_cfg_qu_hr, NULL), IWL_DEV_INFO(0x4DF0, 0x4070, iwl_ax201_cfg_qu_hr, NULL), + IWL_DEV_INFO(0x4DF0, 0x6074, iwl_ax201_cfg_qu_hr, NULL), /* So with HR */ IWL_DEV_INFO(0x2725, 0x0090, iwlax211_2ax_cfg_so_gf_a0, NULL), -- cgit v1.2.3 From 9c04fd95fa830d60e5bdb08bcd7ff68d7e120e5b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 26 Mar 2021 12:57:20 +0200 Subject: iwlwifi: fw: fix notification wait locking Since we now call iwl_notification_wait_notify() from the NAPI poll in soft-IRQ, we get a (valid) lockdep complaint that we could get a deadlock by taking the spinlock from sleeping context and then getting the soft-IRQ that also tries to take it (in NAPI polling). Fix this by disabling soft-IRQs for this lock. Signed-off-by: Johannes Berg Fixes: 25edc8f259c7 ("iwlwifi: pcie: properly implement NAPI") Signed-off-by: Luca Coelho Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/iwlwifi.20210326125611.c3b2e3d6b58b.Ic56f351d04674df70567bab0269cba91bdbc853c@changeid --- drivers/net/wireless/intel/iwlwifi/fw/notif-wait.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/fw/notif-wait.c b/drivers/net/wireless/intel/iwlwifi/fw/notif-wait.c index 3dbc6f3f92cc..231d2517f398 100644 --- a/drivers/net/wireless/intel/iwlwifi/fw/notif-wait.c +++ b/drivers/net/wireless/intel/iwlwifi/fw/notif-wait.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause /* - * Copyright (C) 2005-2014 Intel Corporation + * Copyright (C) 2005-2014, 2021 Intel Corporation * Copyright (C) 2015-2017 Intel Deutschland GmbH */ #include @@ -26,7 +26,7 @@ bool iwl_notification_wait(struct iwl_notif_wait_data *notif_wait, if (!list_empty(¬if_wait->notif_waits)) { struct iwl_notification_wait *w; - spin_lock(¬if_wait->notif_wait_lock); + spin_lock_bh(¬if_wait->notif_wait_lock); list_for_each_entry(w, ¬if_wait->notif_waits, list) { int i; bool found = false; @@ -59,7 +59,7 @@ bool iwl_notification_wait(struct iwl_notif_wait_data *notif_wait, triggered = true; } } - spin_unlock(¬if_wait->notif_wait_lock); + spin_unlock_bh(¬if_wait->notif_wait_lock); } return triggered; @@ -70,10 +70,10 @@ void iwl_abort_notification_waits(struct iwl_notif_wait_data *notif_wait) { struct iwl_notification_wait *wait_entry; - spin_lock(¬if_wait->notif_wait_lock); + spin_lock_bh(¬if_wait->notif_wait_lock); list_for_each_entry(wait_entry, ¬if_wait->notif_waits, list) wait_entry->aborted = true; - spin_unlock(¬if_wait->notif_wait_lock); + spin_unlock_bh(¬if_wait->notif_wait_lock); wake_up_all(¬if_wait->notif_waitq); } -- cgit v1.2.3 From 08f4b0b1c07bcb70247931d81233fb9c59f50c35 Mon Sep 17 00:00:00 2001 From: Luca Coelho Date: Fri, 26 Mar 2021 12:57:21 +0200 Subject: iwlwifi: pcie: add support for So-F devices We have a new type of device that has a different MAC ID, but is otherwise identical to So devices. Add rules to match this new ID accordingly. Signed-off-by: Luca Coelho Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/iwlwifi.20210326125611.4feea3560def.I2b6ef794c2073a18779dd40fb53f8c942d1ab42d@changeid --- drivers/net/wireless/intel/iwlwifi/iwl-config.h | 1 + drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 26 ++++++++++++++++++++++++- 2 files changed, 26 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-config.h b/drivers/net/wireless/intel/iwlwifi/iwl-config.h index 75f99ff7f908..c4f5da76f1c0 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-config.h +++ b/drivers/net/wireless/intel/iwlwifi/iwl-config.h @@ -414,6 +414,7 @@ struct iwl_cfg { #define IWL_CFG_MAC_TYPE_QNJ 0x36 #define IWL_CFG_MAC_TYPE_SO 0x37 #define IWL_CFG_MAC_TYPE_SNJ 0x42 +#define IWL_CFG_MAC_TYPE_SOF 0x43 #define IWL_CFG_MAC_TYPE_MA 0x44 #define IWL_CFG_RF_TYPE_TH 0x105 diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c index 4e2219b46db2..558a0b2ef0fc 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c @@ -1041,7 +1041,31 @@ static const struct iwl_dev_info iwl_dev_info_table[] = { IWL_CFG_MAC_TYPE_SO, IWL_CFG_ANY, IWL_CFG_RF_TYPE_HR2, IWL_CFG_ANY, IWL_CFG_160, IWL_CFG_ANY, IWL_CFG_NO_CDB, - iwl_cfg_so_a0_hr_a0, iwl_ax201_name) + iwl_cfg_so_a0_hr_a0, iwl_ax201_name), + +/* So-F with Hr */ + _IWL_DEV_INFO(IWL_CFG_ANY, IWL_CFG_ANY, + IWL_CFG_MAC_TYPE_SOF, IWL_CFG_ANY, + IWL_CFG_RF_TYPE_HR2, IWL_CFG_ANY, + IWL_CFG_NO_160, IWL_CFG_ANY, IWL_CFG_NO_CDB, + iwl_cfg_so_a0_hr_a0, iwl_ax203_name), + _IWL_DEV_INFO(IWL_CFG_ANY, IWL_CFG_ANY, + IWL_CFG_MAC_TYPE_SOF, IWL_CFG_ANY, + IWL_CFG_RF_TYPE_HR1, IWL_CFG_ANY, + IWL_CFG_160, IWL_CFG_ANY, IWL_CFG_NO_CDB, + iwl_cfg_so_a0_hr_a0, iwl_ax101_name), + _IWL_DEV_INFO(IWL_CFG_ANY, IWL_CFG_ANY, + IWL_CFG_MAC_TYPE_SOF, IWL_CFG_ANY, + IWL_CFG_RF_TYPE_HR2, IWL_CFG_ANY, + IWL_CFG_160, IWL_CFG_ANY, IWL_CFG_NO_CDB, + iwl_cfg_so_a0_hr_a0, iwl_ax201_name), + +/* So-F with Gf */ + _IWL_DEV_INFO(IWL_CFG_ANY, IWL_CFG_ANY, + IWL_CFG_MAC_TYPE_SOF, IWL_CFG_ANY, + IWL_CFG_RF_TYPE_GF, IWL_CFG_ANY, + IWL_CFG_160, IWL_CFG_ANY, IWL_CFG_NO_CDB, + iwlax211_2ax_cfg_so_gf_a0, iwl_ax211_name), #endif /* CONFIG_IWLMVM */ }; -- cgit v1.2.3 From 39fb06f791429eaee8374ef12634c0fbf68a5a9f Mon Sep 17 00:00:00 2001 From: Gregory Greenman Date: Fri, 26 Mar 2021 12:57:22 +0200 Subject: iwlwifi: mvm: rfi: don't lock mvm->mutex when sending config command The mutex is already locked in iwl_mvm_mac_start. Signed-off-by: Gregory Greenman Fixes: 21254908cbe9 ("iwlwifi: mvm: add RFI-M support") Signed-off-by: Luca Coelho Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/iwlwifi.20210326125611.703288ea058d.I82a0312389032d07c3b478bef3e938e06bfa7df6@changeid --- drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c | 7 +++++-- drivers/net/wireless/intel/iwlwifi/mvm/rfi.c | 6 +++--- 2 files changed, 8 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c b/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c index 130760572262..34ddef97b099 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c @@ -1786,10 +1786,13 @@ static ssize_t iwl_dbgfs_rfi_freq_table_write(struct iwl_mvm *mvm, char *buf, return -EINVAL; /* value zero triggers re-sending the default table to the device */ - if (!op_id) + if (!op_id) { + mutex_lock(&mvm->mutex); ret = iwl_rfi_send_config_cmd(mvm, NULL); - else + mutex_unlock(&mvm->mutex); + } else { ret = -EOPNOTSUPP; /* in the future a new table will be added */ + } return ret ?: count; } diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rfi.c b/drivers/net/wireless/intel/iwlwifi/mvm/rfi.c index 873919048143..0b818067067c 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/rfi.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/rfi.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause /* - * Copyright (C) 2020 Intel Corporation + * Copyright (C) 2020 - 2021 Intel Corporation */ #include "mvm.h" @@ -66,6 +66,8 @@ int iwl_rfi_send_config_cmd(struct iwl_mvm *mvm, struct iwl_rfi_lut_entry *rfi_t if (!fw_has_capa(&mvm->fw->ucode_capa, IWL_UCODE_TLV_CAPA_RFIM_SUPPORT)) return -EOPNOTSUPP; + lockdep_assert_held(&mvm->mutex); + /* in case no table is passed, use the default one */ if (!rfi_table) { memcpy(cmd.table, iwl_rfi_table, sizeof(cmd.table)); @@ -75,9 +77,7 @@ int iwl_rfi_send_config_cmd(struct iwl_mvm *mvm, struct iwl_rfi_lut_entry *rfi_t cmd.oem = 1; } - mutex_lock(&mvm->mutex); ret = iwl_mvm_send_cmd(mvm, &hcmd); - mutex_unlock(&mvm->mutex); if (ret) IWL_ERR(mvm, "Failed to send RFI config cmd %d\n", ret); -- cgit v1.2.3 From 65db391dd874db42279713405f29f4ac93682d13 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 26 Mar 2021 12:57:23 +0200 Subject: iwlwifi: mvm: fix beacon protection checks Unfortunately, since beacon protection isn't fully available yet, we didn't notice that there are problems with it and that the replay detection isn't working correctly. We were relying only on mac80211, since iwl_mvm_rx_crypto() exits when !ieee80211_has_protected(), which is of course true for protected (but not encrypted) management frames. Fix this to properly detect protected (but not encrypted) management frames and handle them - we continue to only care about beacons since for others everything can and will be checked in mac80211. Signed-off-by: Johannes Berg Fixes: b1fdc2505abc ("iwlwifi: mvm: advertise BIGTK client support if available") Signed-off-by: Luca Coelho Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/iwlwifi.20210326125611.23c990843369.I09c262a8f6f9852cc8f513cdcb31a7f8f87dd8af@changeid --- drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c index c21736f80c29..af5a6dd81c41 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c @@ -272,10 +272,10 @@ static void iwl_mvm_get_signal_strength(struct iwl_mvm *mvm, rx_status->chain_signal[2] = S8_MIN; } -static int iwl_mvm_rx_mgmt_crypto(struct ieee80211_sta *sta, - struct ieee80211_hdr *hdr, - struct iwl_rx_mpdu_desc *desc, - u32 status) +static int iwl_mvm_rx_mgmt_prot(struct ieee80211_sta *sta, + struct ieee80211_hdr *hdr, + struct iwl_rx_mpdu_desc *desc, + u32 status) { struct iwl_mvm_sta *mvmsta; struct iwl_mvm_vif *mvmvif; @@ -285,6 +285,9 @@ static int iwl_mvm_rx_mgmt_crypto(struct ieee80211_sta *sta, u32 len = le16_to_cpu(desc->mpdu_len); const u8 *frame = (void *)hdr; + if ((status & IWL_RX_MPDU_STATUS_SEC_MASK) == IWL_RX_MPDU_STATUS_SEC_NONE) + return 0; + /* * For non-beacon, we don't really care. But beacons may * be filtered out, and we thus need the firmware's replay @@ -356,6 +359,10 @@ static int iwl_mvm_rx_crypto(struct iwl_mvm *mvm, struct ieee80211_sta *sta, IWL_RX_MPDU_STATUS_SEC_UNKNOWN && !mvm->monitor_on) return -1; + if (unlikely(ieee80211_is_mgmt(hdr->frame_control) && + !ieee80211_has_protected(hdr->frame_control))) + return iwl_mvm_rx_mgmt_prot(sta, hdr, desc, status); + if (!ieee80211_has_protected(hdr->frame_control) || (status & IWL_RX_MPDU_STATUS_SEC_MASK) == IWL_RX_MPDU_STATUS_SEC_NONE) @@ -411,7 +418,7 @@ static int iwl_mvm_rx_crypto(struct iwl_mvm *mvm, struct ieee80211_sta *sta, stats->flag |= RX_FLAG_DECRYPTED; return 0; case RX_MPDU_RES_STATUS_SEC_CMAC_GMAC_ENC: - return iwl_mvm_rx_mgmt_crypto(sta, hdr, desc, status); + break; default: /* * Sometimes we can get frames that were not decrypted -- cgit v1.2.3 From 617085fca6375e2c1667d1fbfc6adc4034c85f04 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Tue, 30 Mar 2021 11:46:07 +0200 Subject: can: mcp251x: fix support for half duplex SPI host controllers Some SPI host controllers do not support full-duplex SPI transfers. The function mcp251x_spi_trans() does a full duplex transfer. It is used in several places in the driver, where a TX half duplex transfer is sufficient. To fix support for half duplex SPI host controllers, this patch introduces a new function mcp251x_spi_write() and changes all callers that do a TX half duplex transfer to use mcp251x_spi_write(). Fixes: e0e25001d088 ("can: mcp251x: add support for half duplex controllers") Link: https://lore.kernel.org/r/20210330100246.1074375-1-mkl@pengutronix.de Cc: Tim Harvey Tested-By: Tim Harvey Reported-by: Gerhard Bertelsmann Signed-off-by: Marc Kleine-Budde --- drivers/net/can/spi/mcp251x.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/spi/mcp251x.c b/drivers/net/can/spi/mcp251x.c index f69fb4238a65..a57da43680d8 100644 --- a/drivers/net/can/spi/mcp251x.c +++ b/drivers/net/can/spi/mcp251x.c @@ -314,6 +314,18 @@ static int mcp251x_spi_trans(struct spi_device *spi, int len) return ret; } +static int mcp251x_spi_write(struct spi_device *spi, int len) +{ + struct mcp251x_priv *priv = spi_get_drvdata(spi); + int ret; + + ret = spi_write(spi, priv->spi_tx_buf, len); + if (ret) + dev_err(&spi->dev, "spi write failed: ret = %d\n", ret); + + return ret; +} + static u8 mcp251x_read_reg(struct spi_device *spi, u8 reg) { struct mcp251x_priv *priv = spi_get_drvdata(spi); @@ -361,7 +373,7 @@ static void mcp251x_write_reg(struct spi_device *spi, u8 reg, u8 val) priv->spi_tx_buf[1] = reg; priv->spi_tx_buf[2] = val; - mcp251x_spi_trans(spi, 3); + mcp251x_spi_write(spi, 3); } static void mcp251x_write_2regs(struct spi_device *spi, u8 reg, u8 v1, u8 v2) @@ -373,7 +385,7 @@ static void mcp251x_write_2regs(struct spi_device *spi, u8 reg, u8 v1, u8 v2) priv->spi_tx_buf[2] = v1; priv->spi_tx_buf[3] = v2; - mcp251x_spi_trans(spi, 4); + mcp251x_spi_write(spi, 4); } static void mcp251x_write_bits(struct spi_device *spi, u8 reg, @@ -386,7 +398,7 @@ static void mcp251x_write_bits(struct spi_device *spi, u8 reg, priv->spi_tx_buf[2] = mask; priv->spi_tx_buf[3] = val; - mcp251x_spi_trans(spi, 4); + mcp251x_spi_write(spi, 4); } static u8 mcp251x_read_stat(struct spi_device *spi) @@ -618,7 +630,7 @@ static void mcp251x_hw_tx_frame(struct spi_device *spi, u8 *buf, buf[i]); } else { memcpy(priv->spi_tx_buf, buf, TXBDAT_OFF + len); - mcp251x_spi_trans(spi, TXBDAT_OFF + len); + mcp251x_spi_write(spi, TXBDAT_OFF + len); } } @@ -650,7 +662,7 @@ static void mcp251x_hw_tx(struct spi_device *spi, struct can_frame *frame, /* use INSTRUCTION_RTS, to avoid "repeated frame problem" */ priv->spi_tx_buf[0] = INSTRUCTION_RTS(1 << tx_buf_idx); - mcp251x_spi_trans(priv->spi, 1); + mcp251x_spi_write(priv->spi, 1); } static void mcp251x_hw_rx_frame(struct spi_device *spi, u8 *buf, @@ -888,7 +900,7 @@ static int mcp251x_hw_reset(struct spi_device *spi) mdelay(MCP251X_OST_DELAY_MS); priv->spi_tx_buf[0] = INSTRUCTION_RESET; - ret = mcp251x_spi_trans(spi, 1); + ret = mcp251x_spi_write(spi, 1); if (ret) return ret; -- cgit v1.2.3 From 3b943360a20f3e4b2e0133c7cd7138b51fd93de6 Mon Sep 17 00:00:00 2001 From: Sebastian Reichel Date: Sat, 27 Feb 2021 22:45:42 +0100 Subject: drm/panel: panel-dsi-cm: disable TE for now Disable TE for Droid 4 panel, since implementation is currently broken. Also disable it for N950 panel, which is untested. Reported-by: Tony Lindgren Reported-by: Tomi Valkeinen Fixes: 4c1b935fea54 ("drm/omap: dsi: move TE GPIO handling into core") Signed-off-by: Sebastian Reichel Tested-by: Tony Lindgren Acked-by: Thierry Reding Signed-off-by: Tomi Valkeinen Link: https://patchwork.freedesktop.org/patch/msgid/20210227214542.99961-1-sebastian.reichel@collabora.com --- drivers/gpu/drm/panel/panel-dsi-cm.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/panel/panel-dsi-cm.c b/drivers/gpu/drm/panel/panel-dsi-cm.c index af381d756ac1..5fbfb71ca3d9 100644 --- a/drivers/gpu/drm/panel/panel-dsi-cm.c +++ b/drivers/gpu/drm/panel/panel-dsi-cm.c @@ -37,6 +37,7 @@ struct dsic_panel_data { u32 height_mm; u32 max_hs_rate; u32 max_lp_rate; + bool te_support; }; struct panel_drv_data { @@ -334,9 +335,11 @@ static int dsicm_power_on(struct panel_drv_data *ddata) if (r) goto err; - r = mipi_dsi_dcs_set_tear_on(ddata->dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK); - if (r) - goto err; + if (ddata->panel_data->te_support) { + r = mipi_dsi_dcs_set_tear_on(ddata->dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK); + if (r) + goto err; + } /* possible panel bug */ msleep(100); @@ -619,6 +622,7 @@ static const struct dsic_panel_data taal_data = { .height_mm = 0, .max_hs_rate = 300000000, .max_lp_rate = 10000000, + .te_support = true, }; static const struct dsic_panel_data himalaya_data = { @@ -629,6 +633,7 @@ static const struct dsic_panel_data himalaya_data = { .height_mm = 88, .max_hs_rate = 300000000, .max_lp_rate = 10000000, + .te_support = false, }; static const struct dsic_panel_data droid4_data = { @@ -639,6 +644,7 @@ static const struct dsic_panel_data droid4_data = { .height_mm = 89, .max_hs_rate = 300000000, .max_lp_rate = 10000000, + .te_support = false, }; static const struct of_device_id dsicm_of_match[] = { -- cgit v1.2.3 From 6eff5721933c08c3b76d6126aee24d8f134518ef Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 1 Apr 2021 07:33:14 -0700 Subject: cxl/mem: Use sysfs_emit() for attribute show routines While none the CXL sysfs attributes are threatening to overrun a PAGE_SIZE of output, it is good form to use the recommended helpers. Fixes: b39cb1052a5c ("cxl/mem: Register CXL memX devices") Reported-by: Jason Gunthorpe Reviewed-by: Ben Widawsky Reviewed-by: Jason Gunthorpe Link: https://lore.kernel.org/r/161728759424.2474381.11231441014951343463.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams --- drivers/cxl/mem.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/cxl/mem.c b/drivers/cxl/mem.c index 244cb7d89678..832582033683 100644 --- a/drivers/cxl/mem.c +++ b/drivers/cxl/mem.c @@ -1066,7 +1066,7 @@ static ssize_t firmware_version_show(struct device *dev, struct cxl_memdev *cxlmd = to_cxl_memdev(dev); struct cxl_mem *cxlm = cxlmd->cxlm; - return sprintf(buf, "%.16s\n", cxlm->firmware_version); + return sysfs_emit(buf, "%.16s\n", cxlm->firmware_version); } static DEVICE_ATTR_RO(firmware_version); @@ -1076,7 +1076,7 @@ static ssize_t payload_max_show(struct device *dev, struct cxl_memdev *cxlmd = to_cxl_memdev(dev); struct cxl_mem *cxlm = cxlmd->cxlm; - return sprintf(buf, "%zu\n", cxlm->payload_size); + return sysfs_emit(buf, "%zu\n", cxlm->payload_size); } static DEVICE_ATTR_RO(payload_max); @@ -1087,7 +1087,7 @@ static ssize_t ram_size_show(struct device *dev, struct device_attribute *attr, struct cxl_mem *cxlm = cxlmd->cxlm; unsigned long long len = range_len(&cxlm->ram_range); - return sprintf(buf, "%#llx\n", len); + return sysfs_emit(buf, "%#llx\n", len); } static struct device_attribute dev_attr_ram_size = @@ -1100,7 +1100,7 @@ static ssize_t pmem_size_show(struct device *dev, struct device_attribute *attr, struct cxl_mem *cxlm = cxlmd->cxlm; unsigned long long len = range_len(&cxlm->pmem_range); - return sprintf(buf, "%#llx\n", len); + return sysfs_emit(buf, "%#llx\n", len); } static struct device_attribute dev_attr_pmem_size = -- cgit v1.2.3 From 5877515912cc4f0d67071b7cee15076ebef24708 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 1 Apr 2021 07:33:19 -0700 Subject: cxl/mem: Fix synchronization mechanism for device removal vs ioctl operations The percpu_ref to gate whether cxl_memdev_ioctl() is free to use the driver context (@cxlm) to issue I/O is overkill, implemented incorrectly (missing a device reference before accessing the percpu_ref), and the complexities of shutting down a percpu_ref contributed to a bug in the error unwind in cxl_mem_add_memdev() (missing put_device() to be fixed separately). Use an rwsem to explicitly synchronize the usage of cxlmd->cxlm, and add the missing reference counting for cxlmd in cxl_memdev_open() and cxl_memdev_release_file(). Fixes: b39cb1052a5c ("cxl/mem: Register CXL memX devices") Reported-by: Jason Gunthorpe Reviewed-by: Jason Gunthorpe Link: https://lore.kernel.org/r/161728759948.2474381.17481500816783671817.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams --- drivers/cxl/mem.c | 97 ++++++++++++++++++++++++++++--------------------------- 1 file changed, 50 insertions(+), 47 deletions(-) (limited to 'drivers') diff --git a/drivers/cxl/mem.c b/drivers/cxl/mem.c index 832582033683..438f0861c46c 100644 --- a/drivers/cxl/mem.c +++ b/drivers/cxl/mem.c @@ -96,21 +96,18 @@ struct mbox_cmd { * @dev: driver core device object * @cdev: char dev core object for ioctl operations * @cxlm: pointer to the parent device driver data - * @ops_active: active user of @cxlm in ops handlers - * @ops_dead: completion when all @cxlm ops users have exited * @id: id number of this memdev instance. */ struct cxl_memdev { struct device dev; struct cdev cdev; struct cxl_mem *cxlm; - struct percpu_ref ops_active; - struct completion ops_dead; int id; }; static int cxl_mem_major; static DEFINE_IDA(cxl_memdev_ida); +static DECLARE_RWSEM(cxl_memdev_rwsem); static struct dentry *cxl_debugfs; static bool cxl_raw_allow_all; @@ -776,26 +773,43 @@ static long __cxl_memdev_ioctl(struct cxl_memdev *cxlmd, unsigned int cmd, static long cxl_memdev_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { - struct cxl_memdev *cxlmd; - struct inode *inode; - int rc = -ENOTTY; + struct cxl_memdev *cxlmd = file->private_data; + int rc = -ENXIO; - inode = file_inode(file); - cxlmd = container_of(inode->i_cdev, typeof(*cxlmd), cdev); + down_read(&cxl_memdev_rwsem); + if (cxlmd->cxlm) + rc = __cxl_memdev_ioctl(cxlmd, cmd, arg); + up_read(&cxl_memdev_rwsem); - if (!percpu_ref_tryget_live(&cxlmd->ops_active)) - return -ENXIO; + return rc; +} - rc = __cxl_memdev_ioctl(cxlmd, cmd, arg); +static int cxl_memdev_open(struct inode *inode, struct file *file) +{ + struct cxl_memdev *cxlmd = + container_of(inode->i_cdev, typeof(*cxlmd), cdev); - percpu_ref_put(&cxlmd->ops_active); + get_device(&cxlmd->dev); + file->private_data = cxlmd; - return rc; + return 0; +} + +static int cxl_memdev_release_file(struct inode *inode, struct file *file) +{ + struct cxl_memdev *cxlmd = + container_of(inode->i_cdev, typeof(*cxlmd), cdev); + + put_device(&cxlmd->dev); + + return 0; } static const struct file_operations cxl_memdev_fops = { .owner = THIS_MODULE, .unlocked_ioctl = cxl_memdev_ioctl, + .open = cxl_memdev_open, + .release = cxl_memdev_release_file, .compat_ioctl = compat_ptr_ioctl, .llseek = noop_llseek, }; @@ -1049,7 +1063,6 @@ static void cxl_memdev_release(struct device *dev) { struct cxl_memdev *cxlmd = to_cxl_memdev(dev); - percpu_ref_exit(&cxlmd->ops_active); ida_free(&cxl_memdev_ida, cxlmd->id); kfree(cxlmd); } @@ -1150,24 +1163,21 @@ static const struct device_type cxl_memdev_type = { .groups = cxl_memdev_attribute_groups, }; -static void cxlmdev_unregister(void *_cxlmd) +static void cxl_memdev_shutdown(struct cxl_memdev *cxlmd) { - struct cxl_memdev *cxlmd = _cxlmd; - struct device *dev = &cxlmd->dev; - - percpu_ref_kill(&cxlmd->ops_active); - cdev_device_del(&cxlmd->cdev, dev); - wait_for_completion(&cxlmd->ops_dead); + down_write(&cxl_memdev_rwsem); cxlmd->cxlm = NULL; - put_device(dev); + up_write(&cxl_memdev_rwsem); } -static void cxlmdev_ops_active_release(struct percpu_ref *ref) +static void cxl_memdev_unregister(void *_cxlmd) { - struct cxl_memdev *cxlmd = - container_of(ref, typeof(*cxlmd), ops_active); + struct cxl_memdev *cxlmd = _cxlmd; + struct device *dev = &cxlmd->dev; - complete(&cxlmd->ops_dead); + cdev_device_del(&cxlmd->cdev, dev); + cxl_memdev_shutdown(cxlmd); + put_device(dev); } static int cxl_mem_add_memdev(struct cxl_mem *cxlm) @@ -1181,17 +1191,6 @@ static int cxl_mem_add_memdev(struct cxl_mem *cxlm) cxlmd = kzalloc(sizeof(*cxlmd), GFP_KERNEL); if (!cxlmd) return -ENOMEM; - init_completion(&cxlmd->ops_dead); - - /* - * @cxlm is deallocated when the driver unbinds so operations - * that are using it need to hold a live reference. - */ - cxlmd->cxlm = cxlm; - rc = percpu_ref_init(&cxlmd->ops_active, cxlmdev_ops_active_release, 0, - GFP_KERNEL); - if (rc) - goto err_ref; rc = ida_alloc_range(&cxl_memdev_ida, 0, CXL_MEM_MAX_DEVS, GFP_KERNEL); if (rc < 0) @@ -1209,23 +1208,27 @@ static int cxl_mem_add_memdev(struct cxl_mem *cxlm) cdev = &cxlmd->cdev; cdev_init(cdev, &cxl_memdev_fops); + /* + * Activate ioctl operations, no cxl_memdev_rwsem manipulation + * needed as this is ordered with cdev_add() publishing the device. + */ + cxlmd->cxlm = cxlm; + rc = cdev_device_add(cdev, dev); if (rc) goto err_add; - return devm_add_action_or_reset(dev->parent, cxlmdev_unregister, cxlmd); + return devm_add_action_or_reset(dev->parent, cxl_memdev_unregister, + cxlmd); err_add: - ida_free(&cxl_memdev_ida, cxlmd->id); -err_id: /* - * Theoretically userspace could have already entered the fops, - * so flush ops_active. + * The cdev was briefly live, shutdown any ioctl operations that + * saw that state. */ - percpu_ref_kill(&cxlmd->ops_active); - wait_for_completion(&cxlmd->ops_dead); - percpu_ref_exit(&cxlmd->ops_active); -err_ref: + cxl_memdev_shutdown(cxlmd); + ida_free(&cxl_memdev_ida, cxlmd->id); +err_id: kfree(cxlmd); return rc; -- cgit v1.2.3 From 1c3333a28d4532cfc37d4d25bfc76654a0c76643 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 1 Apr 2021 07:33:25 -0700 Subject: cxl/mem: Do not rely on device_add() side effects for dev_set_name() failures While device_add() will happen to catch dev_set_name() failures it is a broken pattern to follow given that the core may try to fall back to a different name. Add explicit checking for dev_set_name() failures to be cleaned up by put_device(). Skip cdev_device_add() and proceed directly to put_device() if the name set fails. This type of bug is easier to see if 'alloc' is split from 'add' operations that require put_device() on failure. So cxl_memdev_alloc() is split out as a result. Fixes: b39cb1052a5c ("cxl/mem: Register CXL memX devices") Reported-by: Jason Gunthorpe Reviewed-by: Jason Gunthorpe Link: https://lore.kernel.org/r/161728760514.2474381.1163928273337158134.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams --- drivers/cxl/mem.c | 39 +++++++++++++++++++++++++++++---------- 1 file changed, 29 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/cxl/mem.c b/drivers/cxl/mem.c index 438f0861c46c..da93b633531f 100644 --- a/drivers/cxl/mem.c +++ b/drivers/cxl/mem.c @@ -1180,7 +1180,7 @@ static void cxl_memdev_unregister(void *_cxlmd) put_device(dev); } -static int cxl_mem_add_memdev(struct cxl_mem *cxlm) +static struct cxl_memdev *cxl_memdev_alloc(struct cxl_mem *cxlm) { struct pci_dev *pdev = cxlm->pdev; struct cxl_memdev *cxlmd; @@ -1190,11 +1190,11 @@ static int cxl_mem_add_memdev(struct cxl_mem *cxlm) cxlmd = kzalloc(sizeof(*cxlmd), GFP_KERNEL); if (!cxlmd) - return -ENOMEM; + return ERR_PTR(-ENOMEM); rc = ida_alloc_range(&cxl_memdev_ida, 0, CXL_MEM_MAX_DEVS, GFP_KERNEL); if (rc < 0) - goto err_id; + goto err; cxlmd->id = rc; dev = &cxlmd->dev; @@ -1203,10 +1203,31 @@ static int cxl_mem_add_memdev(struct cxl_mem *cxlm) dev->bus = &cxl_bus_type; dev->devt = MKDEV(cxl_mem_major, cxlmd->id); dev->type = &cxl_memdev_type; - dev_set_name(dev, "mem%d", cxlmd->id); cdev = &cxlmd->cdev; cdev_init(cdev, &cxl_memdev_fops); + return cxlmd; + +err: + kfree(cxlmd); + return ERR_PTR(rc); +} + +static int cxl_mem_add_memdev(struct cxl_mem *cxlm) +{ + struct cxl_memdev *cxlmd; + struct device *dev; + struct cdev *cdev; + int rc; + + cxlmd = cxl_memdev_alloc(cxlm); + if (IS_ERR(cxlmd)) + return PTR_ERR(cxlmd); + + dev = &cxlmd->dev; + rc = dev_set_name(dev, "mem%d", cxlmd->id); + if (rc) + goto err; /* * Activate ioctl operations, no cxl_memdev_rwsem manipulation @@ -1214,23 +1235,21 @@ static int cxl_mem_add_memdev(struct cxl_mem *cxlm) */ cxlmd->cxlm = cxlm; + cdev = &cxlmd->cdev; rc = cdev_device_add(cdev, dev); if (rc) - goto err_add; + goto err; return devm_add_action_or_reset(dev->parent, cxl_memdev_unregister, cxlmd); -err_add: +err: /* * The cdev was briefly live, shutdown any ioctl operations that * saw that state. */ cxl_memdev_shutdown(cxlmd); - ida_free(&cxl_memdev_ida, cxlmd->id); -err_id: - kfree(cxlmd); - + put_device(dev); return rc; } -- cgit v1.2.3 From 7eda6457a9ca4dc9754e1158c3794e4487ea4392 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 1 Apr 2021 07:33:30 -0700 Subject: cxl/mem: Disable cxl device power management There is no power management of cxl virtual devices, disable device-power-management and runtime-power-management to prevent userspace from growing expectations of those attributes appearing. They can be added back in the future if needed. Reviewed-by: Ben Widawsky Link: https://lore.kernel.org/r/161728761025.2474381.808344500111924819.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams --- drivers/cxl/mem.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/cxl/mem.c b/drivers/cxl/mem.c index da93b633531f..52f7da49c560 100644 --- a/drivers/cxl/mem.c +++ b/drivers/cxl/mem.c @@ -1203,6 +1203,7 @@ static struct cxl_memdev *cxl_memdev_alloc(struct cxl_mem *cxlm) dev->bus = &cxl_bus_type; dev->devt = MKDEV(cxl_mem_major, cxlmd->id); dev->type = &cxl_memdev_type; + device_set_pm_not_required(dev); cdev = &cxlmd->cdev; cdev_init(cdev, &cxl_memdev_fops); -- cgit v1.2.3 From 392be0bda730df3c71241b2a16bbecac78ee627d Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Wed, 24 Mar 2021 15:16:35 +0100 Subject: cxl/mem: Force array size of mem_commands[] to CXL_MEM_COMMAND_ID_MAX Typically the mem_commands[] array is in sync with 'enum { CXL_CMDS }'. Current code works well. However, the array size of mem_commands[] may not strictly be the same as CXL_MEM_COMMAND_ID_MAX. E.g. if a new CXL_CMD() is added that is guarded by #ifdefs, the array could be shorter. This could lead then further to an out-of-bounds array access in cxl_validate_cmd_from_user(). Fix this by forcing the array size to CXL_MEM_COMMAND_ID_MAX. This also adds range checks for array items in mem_commands[] at compile time. Signed-off-by: Robert Richter Link: https://lore.kernel.org/r/20210324141635.22335-1-rrichter@amd.com Signed-off-by: Dan Williams --- drivers/cxl/mem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/cxl/mem.c b/drivers/cxl/mem.c index 52f7da49c560..e3003f49b329 100644 --- a/drivers/cxl/mem.c +++ b/drivers/cxl/mem.c @@ -166,7 +166,7 @@ struct cxl_mem_command { * table will be validated against the user's input. For example, if size_in is * 0, and the user passed in 1, it is an error. */ -static struct cxl_mem_command mem_commands[] = { +static struct cxl_mem_command mem_commands[CXL_MEM_COMMAND_ID_MAX] = { CXL_CMD(IDENTIFY, 0, 0x43, CXL_CMD_FLAG_FORCE_ENABLE), #ifdef CONFIG_CXL_MEM_RAW_COMMANDS CXL_CMD(RAW, ~0, ~0, 0), -- cgit v1.2.3 From a3790a8a94fc0234c5d38013b48e74ef221ec84c Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 4 Apr 2021 16:38:31 +0200 Subject: platform/x86: intel-hid: Fix spurious wakeups caused by tablet-mode events during suspend Some devices send (duplicate) tablet-mode events when moved around even though the mode has not changed; and they do this even when suspended. Change the tablet-mode event handling when priv->wakeup_mode is set to update the switch state in case it changed and then return immediately (without calling pm_wakeup_hard_event()) to avoid spurious wakeups. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212537 Fixes: 537b0dd4729e ("platform/x86: intel-hid: Add support for SW_TABLET_MODE") Signed-off-by: Hans de Goede Reviewed-by: Elia Devito Link: https://lore.kernel.org/r/20210404143831.25173-1-hdegoede@redhat.com --- drivers/platform/x86/intel-hid.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/platform/x86/intel-hid.c b/drivers/platform/x86/intel-hid.c index 57cc92891a57..078648a9201b 100644 --- a/drivers/platform/x86/intel-hid.c +++ b/drivers/platform/x86/intel-hid.c @@ -483,11 +483,16 @@ static void notify_handler(acpi_handle handle, u32 event, void *context) goto wakeup; /* - * Switch events will wake the device and report the new switch - * position to the input subsystem. + * Some devices send (duplicate) tablet-mode events when moved + * around even though the mode has not changed; and they do this + * even when suspended. + * Update the switch state in case it changed and then return + * without waking up to avoid spurious wakeups. */ - if (priv->switches && (event == 0xcc || event == 0xcd)) - goto wakeup; + if (event == 0xcc || event == 0xcd) { + report_tablet_mode_event(priv->switches, event); + return; + } /* Wake up on 5-button array events only. */ if (event == 0xc0 || !priv->array) @@ -501,9 +506,6 @@ static void notify_handler(acpi_handle handle, u32 event, void *context) wakeup: pm_wakeup_hard_event(&device->dev); - if (report_tablet_mode_event(priv->switches, event)) - return; - return; } -- cgit v1.2.3 From 56b4c6515a367718ced8595debf1567c052ea0b2 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 5 Apr 2021 20:14:05 +0200 Subject: i2c: exynos5: correct top kerneldoc The top comment is not a kerneldoc, as W=1 build reports: drivers/i2c/busses/i2c-exynos5.c:39: warning: expecting prototype for i2c(). Prototype was for HSI2C_CTL() instead Signed-off-by: Krzysztof Kozlowski Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-exynos5.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c index 5ac30d95650c..97d4f3ac0abd 100644 --- a/drivers/i2c/busses/i2c-exynos5.c +++ b/drivers/i2c/busses/i2c-exynos5.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0-only -/** +/* * i2c-exynos5.c - Samsung Exynos5 I2C Controller Driver * * Copyright (C) 2013 Samsung Electronics Co., Ltd. -- cgit v1.2.3 From b25b343db0526669947a427e9a31bac91d29bb06 Mon Sep 17 00:00:00 2001 From: Lv Yunlong Date: Fri, 2 Apr 2021 10:40:19 -0700 Subject: net: broadcom: bcm4908enet: Fix a double free in bcm4908_enet_dma_alloc In bcm4908_enet_dma_alloc, if callee bcm4908_dma_alloc_buf_descs() failed, it will free the ring->cpu_addr by dma_free_coherent() and return error. Then bcm4908_enet_dma_free() will be called, and free the same cpu_addr by dma_free_coherent() again. My patch set ring->cpu_addr to NULL after it is freed in bcm4908_dma_alloc_buf_descs() to avoid the double free. Fixes: 4feffeadbcb2e ("net: broadcom: bcm4908enet: add BCM4908 controller driver") Signed-off-by: Lv Yunlong Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bcm4908_enet.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bcm4908_enet.c b/drivers/net/ethernet/broadcom/bcm4908_enet.c index 98cf82dea3e4..65981931a798 100644 --- a/drivers/net/ethernet/broadcom/bcm4908_enet.c +++ b/drivers/net/ethernet/broadcom/bcm4908_enet.c @@ -172,6 +172,7 @@ static int bcm4908_dma_alloc_buf_descs(struct bcm4908_enet *enet, err_free_buf_descs: dma_free_coherent(dev, size, ring->cpu_addr, ring->dma_addr); + ring->cpu_addr = NULL; return -ENOMEM; } -- cgit v1.2.3 From 0f6925b3e8da0dbbb52447ca8a8b42b371aac7db Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 2 Apr 2021 06:26:02 -0700 Subject: virtio_net: Do not pull payload in skb->head Xuan Zhuo reported that commit 3226b158e67c ("net: avoid 32 x truesize under-estimation for tiny skbs") brought a ~10% performance drop. The reason for the performance drop was that GRO was forced to chain sk_buff (using skb_shinfo(skb)->frag_list), which uses more memory but also cause packet consumers to go over a lot of overhead handling all the tiny skbs. It turns out that virtio_net page_to_skb() has a wrong strategy : It allocates skbs with GOOD_COPY_LEN (128) bytes in skb->head, then copies 128 bytes from the page, before feeding the packet to GRO stack. This was suboptimal before commit 3226b158e67c ("net: avoid 32 x truesize under-estimation for tiny skbs") because GRO was using 2 frags per MSS, meaning we were not packing MSS with 100% efficiency. Fix is to pull only the ethernet header in page_to_skb() Then, we change virtio_net_hdr_to_skb() to pull the missing headers, instead of assuming they were already pulled by callers. This fixes the performance regression, but could also allow virtio_net to accept packets with more than 128bytes of headers. Many thanks to Xuan Zhuo for his report, and his tests/help. Fixes: 3226b158e67c ("net: avoid 32 x truesize under-estimation for tiny skbs") Reported-by: Xuan Zhuo Link: https://www.spinics.net/lists/netdev/msg731397.html Co-Developed-by: Xuan Zhuo Signed-off-by: Xuan Zhuo Signed-off-by: Eric Dumazet Cc: "Michael S. Tsirkin" Cc: Jason Wang Cc: virtualization@lists.linux-foundation.org Acked-by: Jason Wang Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 82e520d2cb12..0824e6999e49 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -406,9 +406,13 @@ static struct sk_buff *page_to_skb(struct virtnet_info *vi, offset += hdr_padded_len; p += hdr_padded_len; - copy = len; - if (copy > skb_tailroom(skb)) - copy = skb_tailroom(skb); + /* Copy all frame if it fits skb->head, otherwise + * we let virtio_net_hdr_to_skb() and GRO pull headers as needed. + */ + if (len <= skb_tailroom(skb)) + copy = len; + else + copy = ETH_HLEN + metasize; skb_put_data(skb, p, copy); if (metasize) { -- cgit v1.2.3 From 66c3f05ddc538ee796321210c906b6ae6fc0792a Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 5 Apr 2021 21:29:22 -0700 Subject: pcnet32: Use pci_resource_len to validate PCI resource pci_resource_start() is not a good indicator to determine if a PCI resource exists or not, since the resource may start at address 0. This is seen when trying to instantiate the driver in qemu for riscv32 or riscv64. pci 0000:00:01.0: reg 0x10: [io 0x0000-0x001f] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x0000001f] ... pcnet32: card has no PCI IO resources, aborting Use pci_resouce_len() instead. Signed-off-by: Guenter Roeck Signed-off-by: David S. Miller --- drivers/net/ethernet/amd/pcnet32.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/amd/pcnet32.c b/drivers/net/ethernet/amd/pcnet32.c index 187b0b9a6e1d..f78daba60b35 100644 --- a/drivers/net/ethernet/amd/pcnet32.c +++ b/drivers/net/ethernet/amd/pcnet32.c @@ -1534,8 +1534,7 @@ pcnet32_probe_pci(struct pci_dev *pdev, const struct pci_device_id *ent) } pci_set_master(pdev); - ioaddr = pci_resource_start(pdev, 0); - if (!ioaddr) { + if (!pci_resource_len(pdev, 0)) { if (pcnet32_debug & NETIF_MSG_PROBE) pr_err("card has no PCI IO resources, aborting\n"); err = -ENODEV; @@ -1548,6 +1547,8 @@ pcnet32_probe_pci(struct pci_dev *pdev, const struct pci_device_id *ent) pr_err("architecture does not support 32bit PCI busmaster DMA\n"); goto err_disable_dev; } + + ioaddr = pci_resource_start(pdev, 0); if (!request_region(ioaddr, PCNET32_TOTAL_SIZE, "pcnet32_probe_pci")) { if (pcnet32_debug & NETIF_MSG_PROBE) pr_err("io address range already allocated\n"); -- cgit v1.2.3 From ed7bedd2c3ca040f1e8ea02c6590a93116b1ec78 Mon Sep 17 00:00:00 2001 From: Guangbin Huang Date: Tue, 6 Apr 2021 21:10:43 +0800 Subject: net: hns3: clear VF down state bit before request link status Currently, the VF down state bit is cleared after VF sending link status request command. There is problem that when VF gets link status replied from PF, the down state bit may still set as 1. In this case, the link status replied from PF will be ignored and always set VF link status to down. To fix this problem, clear VF down state bit before VF requests link status. Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: Guangbin Huang Signed-off-by: Huazhong Tan Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c index 700e068764c8..14b83eca0a5e 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c @@ -2624,14 +2624,14 @@ static int hclgevf_ae_start(struct hnae3_handle *handle) { struct hclgevf_dev *hdev = hclgevf_ae_get_hdev(handle); + clear_bit(HCLGEVF_STATE_DOWN, &hdev->state); + hclgevf_reset_tqp_stats(handle); hclgevf_request_link_info(hdev); hclgevf_update_link_mode(hdev); - clear_bit(HCLGEVF_STATE_DOWN, &hdev->state); - return 0; } -- cgit v1.2.3 From cca8ea3b05c972ffb5295367e6c544369b45fbdd Mon Sep 17 00:00:00 2001 From: Phillip Potter Date: Tue, 6 Apr 2021 18:45:54 +0100 Subject: net: tun: set tun->dev->addr_len during TUNSETLINK processing When changing type with TUNSETLINK ioctl command, set tun->dev->addr_len to match the appropriate type, using new tun_get_addr_len utility function which returns appropriate address length for given type. Fixes a KMSAN-found uninit-value bug reported by syzbot at: https://syzkaller.appspot.com/bug?id=0766d38c656abeace60621896d705743aeefed51 Reported-by: syzbot+001516d86dbe88862cec@syzkaller.appspotmail.com Diagnosed-by: Eric Dumazet Signed-off-by: Phillip Potter Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/tun.c | 48 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) (limited to 'drivers') diff --git a/drivers/net/tun.c b/drivers/net/tun.c index fc86da7f1628..4cf38be26dc9 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -69,6 +69,14 @@ #include #include #include +#include +#include +#include +#include +#include +#include +#include +#include #include #include @@ -2919,6 +2927,45 @@ static int tun_set_ebpf(struct tun_struct *tun, struct tun_prog __rcu **prog_p, return __tun_set_ebpf(tun, prog_p, prog); } +/* Return correct value for tun->dev->addr_len based on tun->dev->type. */ +static unsigned char tun_get_addr_len(unsigned short type) +{ + switch (type) { + case ARPHRD_IP6GRE: + case ARPHRD_TUNNEL6: + return sizeof(struct in6_addr); + case ARPHRD_IPGRE: + case ARPHRD_TUNNEL: + case ARPHRD_SIT: + return 4; + case ARPHRD_ETHER: + return ETH_ALEN; + case ARPHRD_IEEE802154: + case ARPHRD_IEEE802154_MONITOR: + return IEEE802154_EXTENDED_ADDR_LEN; + case ARPHRD_PHONET_PIPE: + case ARPHRD_PPP: + case ARPHRD_NONE: + return 0; + case ARPHRD_6LOWPAN: + return EUI64_ADDR_LEN; + case ARPHRD_FDDI: + return FDDI_K_ALEN; + case ARPHRD_HIPPI: + return HIPPI_ALEN; + case ARPHRD_IEEE802: + return FC_ALEN; + case ARPHRD_ROSE: + return ROSE_ADDR_LEN; + case ARPHRD_NETROM: + return AX25_ADDR_LEN; + case ARPHRD_LOCALTLK: + return LTALK_ALEN; + default: + return 0; + } +} + static long __tun_chr_ioctl(struct file *file, unsigned int cmd, unsigned long arg, int ifreq_len) { @@ -3082,6 +3129,7 @@ static long __tun_chr_ioctl(struct file *file, unsigned int cmd, break; } tun->dev->type = (int) arg; + tun->dev->addr_len = tun_get_addr_len(tun->dev->type); netif_info(tun, drv, tun->dev, "linktype set to %d\n", tun->dev->type); call_netdevice_notifiers(NETDEV_POST_TYPE_CHANGE, -- cgit v1.2.3 From 1a73704c82ed4ee95532ac04645d02075bd1ce3d Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Wed, 24 Mar 2021 09:46:09 +0200 Subject: net/mlx5: Fix HW spec violation configuring uplink Make sure to modify uplink port to follow only if the uplink_follow capability is set as required by the HW spec. Failure to do so causes traffic to the uplink representor net device to cease after switching to switchdev mode. Fixes: 7d0314b11cdd ("net/mlx5e: Modify uplink state on interface up/down") Signed-off-by: Eli Cohen Reviewed-by: Roi Dayan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c index a132fff7a980..8d39bfee84a9 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c @@ -1107,8 +1107,9 @@ static void mlx5e_uplink_rep_enable(struct mlx5e_priv *priv) mlx5e_rep_tc_enable(priv); - mlx5_modify_vport_admin_state(mdev, MLX5_VPORT_STATE_OP_MOD_UPLINK, - 0, 0, MLX5_VPORT_ADMIN_STATE_AUTO); + if (MLX5_CAP_GEN(mdev, uplink_follow)) + mlx5_modify_vport_admin_state(mdev, MLX5_VPORT_STATE_OP_MOD_UPLINK, + 0, 0, MLX5_VPORT_ADMIN_STATE_AUTO); mlx5_lag_add(mdev, netdev); priv->events_nb.notifier_call = uplink_rep_async_event; mlx5_notifier_register(mdev, &priv->events_nb); -- cgit v1.2.3 From d5f9b005c3062d6d96872896b695e5116b921f52 Mon Sep 17 00:00:00 2001 From: Xiaoming Ni Date: Mon, 5 Apr 2021 10:53:39 +0800 Subject: net/mlx5: fix kfree mismatch in indir_table.c Memory allocated by kvzalloc() should be freed by kvfree(). Fixes: 34ca65352ddf2 ("net/mlx5: E-Switch, Indirect table infrastructur") Signed-off-by: Xiaoming Ni Reviewed-by: Leon Romanovsky Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/esw/indir_table.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/esw/indir_table.c b/drivers/net/ethernet/mellanox/mlx5/core/esw/indir_table.c index 6f6772bf61a2..3da7becc1069 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/esw/indir_table.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/esw/indir_table.c @@ -248,7 +248,7 @@ err_mod_hdr_regc0: err_ethertype: kfree(rule); out: - kfree(rule_spec); + kvfree(rule_spec); return err; } @@ -328,7 +328,7 @@ static int mlx5_create_indir_recirc_group(struct mlx5_eswitch *esw, e->recirc_cnt = 0; out: - kfree(in); + kvfree(in); return err; } @@ -347,7 +347,7 @@ static int mlx5_create_indir_fwd_group(struct mlx5_eswitch *esw, spec = kvzalloc(sizeof(*spec), GFP_KERNEL); if (!spec) { - kfree(in); + kvfree(in); return -ENOMEM; } @@ -371,8 +371,8 @@ static int mlx5_create_indir_fwd_group(struct mlx5_eswitch *esw, } err_out: - kfree(spec); - kfree(in); + kvfree(spec); + kvfree(in); return err; } -- cgit v1.2.3 From 3a62583c2853b0ab37a57dde79decea210b5fb89 Mon Sep 17 00:00:00 2001 From: William Roche Date: Tue, 6 Apr 2021 11:28:59 -0400 Subject: RAS/CEC: Correct ce_add_elem()'s returned values ce_add_elem() uses different return values to signal a result from adding an element to the collector. Commit in Fixes: broke the case where the element being added is not found in the array. Correct that. [ bp: Rewrite commit message, add kernel-doc comments. ] Fixes: de0e0624d86f ("RAS/CEC: Check count_threshold unconditionally") Signed-off-by: William Roche Signed-off-by: Borislav Petkov Cc: Link: https://lkml.kernel.org/r/1617722939-29670-1-git-send-email-william.roche@oracle.com --- drivers/ras/cec.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/ras/cec.c b/drivers/ras/cec.c index ddecf25b5dd4..d7894f178bd4 100644 --- a/drivers/ras/cec.c +++ b/drivers/ras/cec.c @@ -309,11 +309,20 @@ static bool sanity_check(struct ce_array *ca) return ret; } +/** + * cec_add_elem - Add an element to the CEC array. + * @pfn: page frame number to insert + * + * Return values: + * - <0: on error + * - 0: on success + * - >0: when the inserted pfn was offlined + */ static int cec_add_elem(u64 pfn) { struct ce_array *ca = &ce_arr; + int count, err, ret = 0; unsigned int to = 0; - int count, ret = 0; /* * We can be called very early on the identify_cpu() path where we are @@ -330,8 +339,8 @@ static int cec_add_elem(u64 pfn) if (ca->n == MAX_ELEMS) WARN_ON(!del_lru_elem_unlocked(ca)); - ret = find_elem(ca, pfn, &to); - if (ret < 0) { + err = find_elem(ca, pfn, &to); + if (err < 0) { /* * Shift range [to-end] to make room for one more element. */ -- cgit v1.2.3 From d120198bd5ff1d41808b6914e1eb89aff937415c Mon Sep 17 00:00:00 2001 From: Luca Fancellu Date: Tue, 6 Apr 2021 11:51:04 +0100 Subject: xen/evtchn: Change irq_info lock to raw_spinlock_t Unmask operation must be called with interrupt disabled, on preempt_rt spin_lock_irqsave/spin_unlock_irqrestore don't disable/enable interrupts, so use raw_* implementation and change lock variable in struct irq_info from spinlock_t to raw_spinlock_t Cc: stable@vger.kernel.org Fixes: 25da4618af24 ("xen/events: don't unmask an event channel when an eoi is pending") Signed-off-by: Luca Fancellu Reviewed-by: Julien Grall Reviewed-by: Wei Liu Link: https://lore.kernel.org/r/20210406105105.10141-1-luca.fancellu@arm.com Signed-off-by: Boris Ostrovsky --- drivers/xen/events/events_base.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/xen/events/events_base.c b/drivers/xen/events/events_base.c index 8236e2364eeb..7bbfd58958bc 100644 --- a/drivers/xen/events/events_base.c +++ b/drivers/xen/events/events_base.c @@ -110,7 +110,7 @@ struct irq_info { unsigned short eoi_cpu; /* EOI must happen on this cpu-1 */ unsigned int irq_epoch; /* If eoi_cpu valid: irq_epoch of event */ u64 eoi_time; /* Time in jiffies when to EOI. */ - spinlock_t lock; + raw_spinlock_t lock; union { unsigned short virq; @@ -312,7 +312,7 @@ static int xen_irq_info_common_setup(struct irq_info *info, info->evtchn = evtchn; info->cpu = cpu; info->mask_reason = EVT_MASK_REASON_EXPLICIT; - spin_lock_init(&info->lock); + raw_spin_lock_init(&info->lock); ret = set_evtchn_to_irq(evtchn, irq); if (ret < 0) @@ -472,28 +472,28 @@ static void do_mask(struct irq_info *info, u8 reason) { unsigned long flags; - spin_lock_irqsave(&info->lock, flags); + raw_spin_lock_irqsave(&info->lock, flags); if (!info->mask_reason) mask_evtchn(info->evtchn); info->mask_reason |= reason; - spin_unlock_irqrestore(&info->lock, flags); + raw_spin_unlock_irqrestore(&info->lock, flags); } static void do_unmask(struct irq_info *info, u8 reason) { unsigned long flags; - spin_lock_irqsave(&info->lock, flags); + raw_spin_lock_irqsave(&info->lock, flags); info->mask_reason &= ~reason; if (!info->mask_reason) unmask_evtchn(info->evtchn); - spin_unlock_irqrestore(&info->lock, flags); + raw_spin_unlock_irqrestore(&info->lock, flags); } #ifdef CONFIG_X86 -- cgit v1.2.3 From fa26d0c778b432d3d9814ea82552e813b33eeb5c Mon Sep 17 00:00:00 2001 From: Vitaly Kuznetsov Date: Tue, 6 Apr 2021 17:56:40 +0200 Subject: ACPI: processor: Fix build when CONFIG_ACPI_PROCESSOR=m Commit 8cdddd182bd7 ("ACPI: processor: Fix CPU0 wakeup in acpi_idle_play_dead()") tried to fix CPU0 hotplug breakage by copying wakeup_cpu0() + start_cpu0() logic from hlt_play_dead()//mwait_play_dead() into acpi_idle_play_dead(). The problem is that these functions are not exported to modules so when CONFIG_ACPI_PROCESSOR=m build fails. The issue could've been fixed by exporting both wakeup_cpu0()/start_cpu0() (the later from assembly) but it seems putting the whole pattern into a new function and exporting it instead is better. Reported-by: kernel test robot Fixes: 8cdddd182bd7 ("CPI: processor: Fix CPU0 wakeup in acpi_idle_play_dead()") Cc: # 5.10+ Signed-off-by: Vitaly Kuznetsov Signed-off-by: Rafael J. Wysocki --- drivers/acpi/processor_idle.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 768a6b4d2368..4e2d76b8b697 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -544,9 +544,7 @@ static int acpi_idle_play_dead(struct cpuidle_device *dev, int index) return -ENODEV; #if defined(CONFIG_X86) && defined(CONFIG_HOTPLUG_CPU) - /* If NMI wants to wake up CPU0, start CPU0. */ - if (wakeup_cpu0()) - start_cpu0(); + cond_wakeup_cpu0(); #endif } -- cgit v1.2.3 From 649cab56de8eb2952498de9b752761ca980cb88a Mon Sep 17 00:00:00 2001 From: Frank Rowand Date: Sun, 4 Apr 2021 22:28:45 -0500 Subject: of: properly check for error returned by fdt_get_name() fdt_get_name() returns error values via a parameter pointer instead of in function return. Fix check for this error value in populate_node() and callers of populate_node(). Chasing up the caller tree showed callers of various functions failing to initialize the value of pointer parameters that can return error values. Initialize those values to NULL. The bug was introduced by commit e6a6928c3ea1 ("of/fdt: Convert FDT functions to use libfdt") but this patch can not be backported directly to that commit because the relevant code has further been restructured by commit dfbd4c6eff35 ("drivers/of: Split unflatten_dt_node()") The bug became visible by triggering a crash on openrisc with: commit 79edff12060f ("scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9") as reported in: https://lore.kernel.org/lkml/20210327224116.69309-1-linux@roeck-us.net/ Fixes: 79edff12060f ("scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9") Reported-by: Guenter Roeck Signed-off-by: Frank Rowand Tested-by: Guenter Roeck Link: https://lore.kernel.org/r/20210405032845.1942533-1-frowand.list@gmail.com Signed-off-by: Rob Herring --- drivers/of/fdt.c | 36 +++++++++++++++++++++++------------- drivers/of/overlay.c | 2 +- drivers/of/unittest.c | 15 ++++++++++----- 3 files changed, 34 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c index dcc1dd96911a..adb26aff481d 100644 --- a/drivers/of/fdt.c +++ b/drivers/of/fdt.c @@ -205,7 +205,7 @@ static void populate_properties(const void *blob, *pprev = NULL; } -static bool populate_node(const void *blob, +static int populate_node(const void *blob, int offset, void **mem, struct device_node *dad, @@ -214,24 +214,24 @@ static bool populate_node(const void *blob, { struct device_node *np; const char *pathp; - unsigned int l, allocl; + int len; - pathp = fdt_get_name(blob, offset, &l); + pathp = fdt_get_name(blob, offset, &len); if (!pathp) { *pnp = NULL; - return false; + return len; } - allocl = ++l; + len++; - np = unflatten_dt_alloc(mem, sizeof(struct device_node) + allocl, + np = unflatten_dt_alloc(mem, sizeof(struct device_node) + len, __alignof__(struct device_node)); if (!dryrun) { char *fn; of_node_init(np); np->full_name = fn = ((char *)np) + sizeof(*np); - memcpy(fn, pathp, l); + memcpy(fn, pathp, len); if (dad != NULL) { np->parent = dad; @@ -295,6 +295,7 @@ static int unflatten_dt_nodes(const void *blob, struct device_node *nps[FDT_MAX_DEPTH]; void *base = mem; bool dryrun = !base; + int ret; if (nodepp) *nodepp = NULL; @@ -322,9 +323,10 @@ static int unflatten_dt_nodes(const void *blob, !of_fdt_device_is_available(blob, offset)) continue; - if (!populate_node(blob, offset, &mem, nps[depth], - &nps[depth+1], dryrun)) - return mem - base; + ret = populate_node(blob, offset, &mem, nps[depth], + &nps[depth+1], dryrun); + if (ret < 0) + return ret; if (!dryrun && nodepp && !*nodepp) *nodepp = nps[depth+1]; @@ -372,6 +374,10 @@ void *__unflatten_device_tree(const void *blob, { int size; void *mem; + int ret; + + if (mynodes) + *mynodes = NULL; pr_debug(" -> unflatten_device_tree()\n"); @@ -392,7 +398,7 @@ void *__unflatten_device_tree(const void *blob, /* First pass, scan for size */ size = unflatten_dt_nodes(blob, NULL, dad, NULL); - if (size < 0) + if (size <= 0) return NULL; size = ALIGN(size, 4); @@ -410,12 +416,16 @@ void *__unflatten_device_tree(const void *blob, pr_debug(" unflattening %p...\n", mem); /* Second pass, do actual unflattening */ - unflatten_dt_nodes(blob, mem, dad, mynodes); + ret = unflatten_dt_nodes(blob, mem, dad, mynodes); + if (be32_to_cpup(mem + size) != 0xdeadbeef) pr_warn("End of tree marker overwritten: %08x\n", be32_to_cpup(mem + size)); - if (detached && mynodes) { + if (ret <= 0) + return NULL; + + if (detached && mynodes && *mynodes) { of_node_set_flag(*mynodes, OF_DETACHED); pr_debug("unflattened tree is detached\n"); } diff --git a/drivers/of/overlay.c b/drivers/of/overlay.c index 50bbe0edf538..e12c643b6ba8 100644 --- a/drivers/of/overlay.c +++ b/drivers/of/overlay.c @@ -1017,7 +1017,7 @@ int of_overlay_fdt_apply(const void *overlay_fdt, u32 overlay_fdt_size, const void *new_fdt; int ret; u32 size; - struct device_node *overlay_root; + struct device_node *overlay_root = NULL; *ovcs_id = 0; ret = 0; diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c index eb100627c186..f9b5b698249f 100644 --- a/drivers/of/unittest.c +++ b/drivers/of/unittest.c @@ -1408,7 +1408,7 @@ static void attach_node_and_children(struct device_node *np) static int __init unittest_data_add(void) { void *unittest_data; - struct device_node *unittest_data_node, *np; + struct device_node *unittest_data_node = NULL, *np; /* * __dtb_testcases_begin[] and __dtb_testcases_end[] are magically * created by cmd_dt_S_dtb in scripts/Makefile.lib @@ -1417,10 +1417,10 @@ static int __init unittest_data_add(void) extern uint8_t __dtb_testcases_end[]; const int size = __dtb_testcases_end - __dtb_testcases_begin; int rc; + void *ret; if (!size) { - pr_warn("%s: No testcase data to attach; not running tests\n", - __func__); + pr_warn("%s: testcases is empty\n", __func__); return -ENODATA; } @@ -1429,9 +1429,14 @@ static int __init unittest_data_add(void) if (!unittest_data) return -ENOMEM; - of_fdt_unflatten_tree(unittest_data, NULL, &unittest_data_node); + ret = of_fdt_unflatten_tree(unittest_data, NULL, &unittest_data_node); + if (!ret) { + pr_warn("%s: unflatten testcases tree failed\n", __func__); + kfree(unittest_data); + return -ENODATA; + } if (!unittest_data_node) { - pr_warn("%s: No tree to attach; not running tests\n", __func__); + pr_warn("%s: testcases tree is empty\n", __func__); kfree(unittest_data); return -ENODATA; } -- cgit v1.2.3 From 603c4690b01aaffe3a6c3605a429f6dac39852ae Mon Sep 17 00:00:00 2001 From: Potnuri Bharat Teja Date: Wed, 31 Mar 2021 19:27:15 +0530 Subject: RDMA/cxgb4: check for ipv6 address properly while destroying listener ipv6 bit is wrongly set by the below which causes fatal adapter lookup engine errors for ipv4 connections while destroying a listener. Fix it to properly check the local address for ipv6. Fixes: 3408be145a5d ("RDMA/cxgb4: Fix adapter LE hash errors while destroying ipv6 listening server") Link: https://lore.kernel.org/r/20210331135715.30072-1-bharat@chelsio.com Signed-off-by: Potnuri Bharat Teja Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/cxgb4/cm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c index 81903749d241..e42c812e74c3 100644 --- a/drivers/infiniband/hw/cxgb4/cm.c +++ b/drivers/infiniband/hw/cxgb4/cm.c @@ -3616,7 +3616,8 @@ int c4iw_destroy_listen(struct iw_cm_id *cm_id) c4iw_init_wr_wait(ep->com.wr_waitp); err = cxgb4_remove_server( ep->com.dev->rdev.lldi.ports[0], ep->stid, - ep->com.dev->rdev.lldi.rxq_ids[0], true); + ep->com.dev->rdev.lldi.rxq_ids[0], + ep->com.local_addr.ss_family == AF_INET6); if (err) goto done; err = c4iw_wait_for_reply(&ep->com.dev->rdev, ep->com.wr_waitp, -- cgit v1.2.3 From 5de61a47eb9064cbbc5f3360d639e8e34a690a54 Mon Sep 17 00:00:00 2001 From: Mike Marciniszyn Date: Mon, 29 Mar 2021 09:48:19 -0400 Subject: IB/hfi1: Fix probe time panic when AIP is enabled with a buggy BIOS A panic can result when AIP is enabled: BUG: unable to handle kernel NULL pointer dereference at 000000000000000 PGD 0 P4D 0 Oops: 0000 1 SMP PTI CPU: 70 PID: 981 Comm: systemd-udevd Tainted: G OE --------- - - 4.18.0-240.el8.x86_64 #1 Hardware name: Intel Corporation S2600KP/S2600KP, BIOS SE5C610.86B.01.01.0005.101720141054 10/17/2014 RIP: 0010:__bitmap_and+0x1b/0x70 RSP: 0018:ffff99aa0845f9f0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8d5a6fc18000 RCX: 0000000000000048 RDX: 0000000000000000 RSI: ffffffffc06336f0 RDI: ffff8d5a8fa67750 RBP: 0000000000000079 R08: 0000000fffffffff R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: ffffffffc06336f0 R13: 00000000000000a0 R14: ffff8d5a6fc18000 R15: 0000000000000003 FS: 00007fec137a5980(0000) GS:ffff8d5a9fa80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000a04b48002 CR4: 00000000001606e0 Call Trace: hfi1_num_netdev_contexts+0x7c/0x110 [hfi1] hfi1_init_dd+0xd7f/0x1a90 [hfi1] ? pci_bus_read_config_dword+0x49/0x70 ? pci_mmcfg_read+0x3e/0xe0 do_init_one.isra.18+0x336/0x640 [hfi1] local_pci_probe+0x41/0x90 pci_device_probe+0x105/0x1c0 really_probe+0x212/0x440 driver_probe_device+0x49/0xc0 device_driver_attach+0x50/0x60 __driver_attach+0x61/0x130 ? device_driver_attach+0x60/0x60 bus_for_each_dev+0x77/0xc0 ? klist_add_tail+0x3b/0x70 bus_add_driver+0x14d/0x1e0 ? dev_init+0x10b/0x10b [hfi1] driver_register+0x6b/0xb0 ? dev_init+0x10b/0x10b [hfi1] hfi1_mod_init+0x1e6/0x20a [hfi1] do_one_initcall+0x46/0x1c3 ? free_unref_page_commit+0x91/0x100 ? _cond_resched+0x15/0x30 ? kmem_cache_alloc_trace+0x140/0x1c0 do_init_module+0x5a/0x220 load_module+0x14b4/0x17e0 ? __do_sys_finit_module+0xa8/0x110 __do_sys_finit_module+0xa8/0x110 do_syscall_64+0x5b/0x1a0 The issue happens when pcibus_to_node() returns NO_NUMA_NODE. Fix this issue by moving the initialization of dd->node to hfi1_devdata allocation and remove the other pcibus_to_node() calls in the probe path and use dd->node instead. Affinity logic is adjusted to use a new field dd->affinity_entry as a guard instead of dd->node. Fixes: 4730f4a6c6b2 ("IB/hfi1: Activate the dummy netdev") Link: https://lore.kernel.org/r/1617025700-31865-4-git-send-email-dennis.dalessandro@cornelisnetworks.com Cc: stable@vger.kernel.org Signed-off-by: Mike Marciniszyn Signed-off-by: Dennis Dalessandro Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/hfi1/affinity.c | 21 +++++---------------- drivers/infiniband/hw/hfi1/hfi.h | 1 + drivers/infiniband/hw/hfi1/init.c | 10 +++++++++- drivers/infiniband/hw/hfi1/netdev_rx.c | 3 +-- 4 files changed, 16 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hfi1/affinity.c b/drivers/infiniband/hw/hfi1/affinity.c index 2a91b8d95e12..04b1e8f021f6 100644 --- a/drivers/infiniband/hw/hfi1/affinity.c +++ b/drivers/infiniband/hw/hfi1/affinity.c @@ -632,22 +632,11 @@ static void _dev_comp_vect_cpu_mask_clean_up(struct hfi1_devdata *dd, */ int hfi1_dev_affinity_init(struct hfi1_devdata *dd) { - int node = pcibus_to_node(dd->pcidev->bus); struct hfi1_affinity_node *entry; const struct cpumask *local_mask; int curr_cpu, possible, i, ret; bool new_entry = false; - /* - * If the BIOS does not have the NUMA node information set, select - * NUMA 0 so we get consistent performance. - */ - if (node < 0) { - dd_dev_err(dd, "Invalid PCI NUMA node. Performance may be affected\n"); - node = 0; - } - dd->node = node; - local_mask = cpumask_of_node(dd->node); if (cpumask_first(local_mask) >= nr_cpu_ids) local_mask = topology_core_cpumask(0); @@ -660,7 +649,7 @@ int hfi1_dev_affinity_init(struct hfi1_devdata *dd) * create an entry in the global affinity structure and initialize it. */ if (!entry) { - entry = node_affinity_allocate(node); + entry = node_affinity_allocate(dd->node); if (!entry) { dd_dev_err(dd, "Unable to allocate global affinity node\n"); @@ -751,6 +740,7 @@ int hfi1_dev_affinity_init(struct hfi1_devdata *dd) if (new_entry) node_affinity_add_tail(entry); + dd->affinity_entry = entry; mutex_unlock(&node_affinity.lock); return 0; @@ -766,10 +756,9 @@ void hfi1_dev_affinity_clean_up(struct hfi1_devdata *dd) { struct hfi1_affinity_node *entry; - if (dd->node < 0) - return; - mutex_lock(&node_affinity.lock); + if (!dd->affinity_entry) + goto unlock; entry = node_affinity_lookup(dd->node); if (!entry) goto unlock; @@ -780,8 +769,8 @@ void hfi1_dev_affinity_clean_up(struct hfi1_devdata *dd) */ _dev_comp_vect_cpu_mask_clean_up(dd, entry); unlock: + dd->affinity_entry = NULL; mutex_unlock(&node_affinity.lock); - dd->node = NUMA_NO_NODE; } /* diff --git a/drivers/infiniband/hw/hfi1/hfi.h b/drivers/infiniband/hw/hfi1/hfi.h index e09e8244a94c..2a9a040569eb 100644 --- a/drivers/infiniband/hw/hfi1/hfi.h +++ b/drivers/infiniband/hw/hfi1/hfi.h @@ -1409,6 +1409,7 @@ struct hfi1_devdata { spinlock_t irq_src_lock; int vnic_num_vports; struct net_device *dummy_netdev; + struct hfi1_affinity_node *affinity_entry; /* Keeps track of IPoIB RSM rule users */ atomic_t ipoib_rsm_usr_num; diff --git a/drivers/infiniband/hw/hfi1/init.c b/drivers/infiniband/hw/hfi1/init.c index cb7ad1288821..786c6316273f 100644 --- a/drivers/infiniband/hw/hfi1/init.c +++ b/drivers/infiniband/hw/hfi1/init.c @@ -1277,7 +1277,6 @@ static struct hfi1_devdata *hfi1_alloc_devdata(struct pci_dev *pdev, dd->pport = (struct hfi1_pportdata *)(dd + 1); dd->pcidev = pdev; pci_set_drvdata(pdev, dd); - dd->node = NUMA_NO_NODE; ret = xa_alloc_irq(&hfi1_dev_table, &dd->unit, dd, xa_limit_32b, GFP_KERNEL); @@ -1287,6 +1286,15 @@ static struct hfi1_devdata *hfi1_alloc_devdata(struct pci_dev *pdev, goto bail; } rvt_set_ibdev_name(&dd->verbs_dev.rdi, "%s_%d", class_name(), dd->unit); + /* + * If the BIOS does not have the NUMA node information set, select + * NUMA 0 so we get consistent performance. + */ + dd->node = pcibus_to_node(pdev->bus); + if (dd->node == NUMA_NO_NODE) { + dd_dev_err(dd, "Invalid PCI NUMA node. Performance may be affected\n"); + dd->node = 0; + } /* * Initialize all locks for the device. This needs to be as early as diff --git a/drivers/infiniband/hw/hfi1/netdev_rx.c b/drivers/infiniband/hw/hfi1/netdev_rx.c index 1fb6e1a0e4e1..1bcab992ac26 100644 --- a/drivers/infiniband/hw/hfi1/netdev_rx.c +++ b/drivers/infiniband/hw/hfi1/netdev_rx.c @@ -173,8 +173,7 @@ u32 hfi1_num_netdev_contexts(struct hfi1_devdata *dd, u32 available_contexts, return 0; } - cpumask_and(node_cpu_mask, cpu_mask, - cpumask_of_node(pcibus_to_node(dd->pcidev->bus))); + cpumask_and(node_cpu_mask, cpu_mask, cpumask_of_node(dd->node)); available_cpus = cpumask_weight(node_cpu_mask); -- cgit v1.2.3 From df7232c4c676be29f1cf45058ec156c1183539ff Mon Sep 17 00:00:00 2001 From: Qingqing Zhuo Date: Thu, 25 Mar 2021 03:44:11 -0400 Subject: drm/amd/display: Add missing mask for DCN3 [Why] DCN3 is not reusing DCN1 mask_sh_list, causing SURFACE_FLIP_INT_MASK missing in the mapping. [How] Add the corresponding entry to DCN3 list. Signed-off-by: Qingqing Zhuo Reviewed-by: Nicholas Kazlauskas Acked-by: Qingqing Zhuo Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hubp.h | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hubp.h b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hubp.h index 705fbfc37502..8a32772d4e91 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hubp.h +++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hubp.h @@ -134,6 +134,7 @@ HUBP_SF(HUBPREQ0_DCSURF_SURFACE_CONTROL, SECONDARY_SURFACE_DCC_EN, mask_sh),\ HUBP_SF(HUBPREQ0_DCSURF_SURFACE_CONTROL, SECONDARY_SURFACE_DCC_IND_BLK, mask_sh),\ HUBP_SF(HUBPREQ0_DCSURF_SURFACE_CONTROL, SECONDARY_SURFACE_DCC_IND_BLK_C, mask_sh),\ + HUBP_SF(HUBPREQ0_DCSURF_SURFACE_FLIP_INTERRUPT, SURFACE_FLIP_INT_MASK, mask_sh),\ HUBP_SF(HUBPRET0_HUBPRET_CONTROL, DET_BUF_PLANE1_BASE_ADDRESS, mask_sh),\ HUBP_SF(HUBPRET0_HUBPRET_CONTROL, CROSSBAR_SRC_CB_B, mask_sh),\ HUBP_SF(HUBPRET0_HUBPRET_CONTROL, CROSSBAR_SRC_CR_R, mask_sh),\ -- cgit v1.2.3 From a975d7d8a356ce92872af0b007b101183f0224e2 Mon Sep 17 00:00:00 2001 From: Danielle Ratson Date: Wed, 7 Apr 2021 13:06:51 +0300 Subject: ethtool: Remove link_mode param and derive link params from driver Some drivers clear the 'ethtool_link_ksettings' struct in their get_link_ksettings() callback, before populating it with actual values. Such drivers will set the new 'link_mode' field to zero, resulting in user space receiving wrong link mode information given that zero is a valid value for the field. Another problem is that some drivers (notably tun) can report random values in the 'link_mode' field. This can result in a general protection fault when the field is used as an index to the 'link_mode_params' array [1]. This happens because such drivers implement their set_link_ksettings() callback by simply overwriting their private copy of 'ethtool_link_ksettings' struct with the one they get from the stack, which is not always properly initialized. Fix these problems by removing 'link_mode' from 'ethtool_link_ksettings' and instead have drivers call ethtool_params_from_link_mode() with the current link mode. The function will derive the link parameters (e.g., speed) from the link mode and fill them in the 'ethtool_link_ksettings' struct. v3: * Remove link_mode parameter and derive the link parameters in the driver instead of passing link_mode parameter to ethtool and derive it there. v2: * Introduce 'cap_link_mode_supported' instead of adding a validity field to 'ethtool_link_ksettings' struct. [1] general protection fault, probably for non-canonical address 0xdffffc00f14cc32c: 0000 [#1] PREEMPT SMP KASAN KASAN: probably user-memory-access in range [0x000000078a661960-0x000000078a661967] CPU: 0 PID: 8452 Comm: syz-executor360 Not tainted 5.11.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__ethtool_get_link_ksettings+0x1a3/0x3a0 net/ethtool/ioctl.c:446 Code: b7 3e fa 83 fd ff 0f 84 30 01 00 00 e8 16 b0 3e fa 48 8d 3c ed 60 d5 69 8a 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 +38 d0 7c 08 84 d2 0f 85 b9 RSP: 0018:ffffc900019df7a0 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff888026136008 RCX: 0000000000000000 RDX: 00000000f14cc32c RSI: ffffffff873439ca RDI: 000000078a661960 RBP: 00000000ffff8880 R08: 00000000ffffffff R09: ffff88802613606f R10: ffffffff873439bc R11: 0000000000000000 R12: 0000000000000000 R13: ffff88802613606c R14: ffff888011d0c210 R15: ffff888011d0c210 FS: 0000000000749300(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004b60f0 CR3: 00000000185c2000 CR4: 00000000001506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: linkinfo_prepare_data+0xfd/0x280 net/ethtool/linkinfo.c:37 ethnl_default_notify+0x1dc/0x630 net/ethtool/netlink.c:586 ethtool_notify+0xbd/0x1f0 net/ethtool/netlink.c:656 ethtool_set_link_ksettings+0x277/0x330 net/ethtool/ioctl.c:620 dev_ethtool+0x2b35/0x45d0 net/ethtool/ioctl.c:2842 dev_ioctl+0x463/0xb70 net/core/dev_ioctl.c:440 sock_do_ioctl+0x148/0x2d0 net/socket.c:1060 sock_ioctl+0x477/0x6a0 net/socket.c:1177 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: c8907043c6ac9 ("ethtool: Get link mode in use instead of speed and duplex parameters") Signed-off-by: Danielle Ratson Reported-by: Eric Dumazet Reviewed-by: Ido Schimmel Signed-off-by: David S. Miller --- .../net/ethernet/mellanox/mlxsw/spectrum_ethtool.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c index 0bd64169bf81..078601d31cde 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c @@ -1230,16 +1230,22 @@ mlxsw_sp1_from_ptys_link_mode(struct mlxsw_sp *mlxsw_sp, bool carrier_ok, u32 ptys_eth_proto, struct ethtool_link_ksettings *cmd) { + struct mlxsw_sp1_port_link_mode link; int i; - cmd->link_mode = -1; + cmd->base.speed = SPEED_UNKNOWN; + cmd->base.duplex = DUPLEX_UNKNOWN; + cmd->lanes = 0; if (!carrier_ok) return; for (i = 0; i < MLXSW_SP1_PORT_LINK_MODE_LEN; i++) { - if (ptys_eth_proto & mlxsw_sp1_port_link_mode[i].mask) - cmd->link_mode = mlxsw_sp1_port_link_mode[i].mask_ethtool; + if (ptys_eth_proto & mlxsw_sp1_port_link_mode[i].mask) { + link = mlxsw_sp1_port_link_mode[i]; + ethtool_params_from_link_mode(cmd, + link.mask_ethtool); + } } } @@ -1672,7 +1678,9 @@ mlxsw_sp2_from_ptys_link_mode(struct mlxsw_sp *mlxsw_sp, bool carrier_ok, struct mlxsw_sp2_port_link_mode link; int i; - cmd->link_mode = -1; + cmd->base.speed = SPEED_UNKNOWN; + cmd->base.duplex = DUPLEX_UNKNOWN; + cmd->lanes = 0; if (!carrier_ok) return; @@ -1680,7 +1688,8 @@ mlxsw_sp2_from_ptys_link_mode(struct mlxsw_sp *mlxsw_sp, bool carrier_ok, for (i = 0; i < MLXSW_SP2_PORT_LINK_MODE_LEN; i++) { if (ptys_eth_proto & mlxsw_sp2_port_link_mode[i].mask) { link = mlxsw_sp2_port_link_mode[i]; - cmd->link_mode = link.mask_ethtool[1]; + ethtool_params_from_link_mode(cmd, + link.mask_ethtool[1]); } } } -- cgit v1.2.3 From 8a12f8836145ffe37e9c8733dce18c22fb668b66 Mon Sep 17 00:00:00 2001 From: Anirudh Rayabharam Date: Wed, 7 Apr 2021 22:57:22 +0530 Subject: net: hso: fix null-ptr-deref during tty device unregistration Multiple ttys try to claim the same the minor number causing a double unregistration of the same device. The first unregistration succeeds but the next one results in a null-ptr-deref. The get_free_serial_index() function returns an available minor number but doesn't assign it immediately. The assignment is done by the caller later. But before this assignment, calls to get_free_serial_index() would return the same minor number. Fix this by modifying get_free_serial_index to assign the minor number immediately after one is found to be and rename it to obtain_minor() to better reflect what it does. Similary, rename set_serial_by_index() to release_minor() and modify it to free up the minor number of the given hso_serial. Every obtain_minor() should have corresponding release_minor() call. Fixes: 72dc1c096c705 ("HSO: add option hso driver") Reported-by: syzbot+c49fe6089f295a05e6f8@syzkaller.appspotmail.com Tested-by: syzbot+c49fe6089f295a05e6f8@syzkaller.appspotmail.com Reviewed-by: Greg Kroah-Hartman Signed-off-by: Anirudh Rayabharam Signed-off-by: David S. Miller --- drivers/net/usb/hso.c | 33 ++++++++++++--------------------- 1 file changed, 12 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index 31d51346786a..9bc58e64b5b7 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -611,7 +611,7 @@ static struct hso_serial *get_serial_by_index(unsigned index) return serial; } -static int get_free_serial_index(void) +static int obtain_minor(struct hso_serial *serial) { int index; unsigned long flags; @@ -619,8 +619,10 @@ static int get_free_serial_index(void) spin_lock_irqsave(&serial_table_lock, flags); for (index = 0; index < HSO_SERIAL_TTY_MINORS; index++) { if (serial_table[index] == NULL) { + serial_table[index] = serial->parent; + serial->minor = index; spin_unlock_irqrestore(&serial_table_lock, flags); - return index; + return 0; } } spin_unlock_irqrestore(&serial_table_lock, flags); @@ -629,15 +631,12 @@ static int get_free_serial_index(void) return -1; } -static void set_serial_by_index(unsigned index, struct hso_serial *serial) +static void release_minor(struct hso_serial *serial) { unsigned long flags; spin_lock_irqsave(&serial_table_lock, flags); - if (serial) - serial_table[index] = serial->parent; - else - serial_table[index] = NULL; + serial_table[serial->minor] = NULL; spin_unlock_irqrestore(&serial_table_lock, flags); } @@ -2230,6 +2229,7 @@ static int hso_stop_serial_device(struct hso_device *hso_dev) static void hso_serial_tty_unregister(struct hso_serial *serial) { tty_unregister_device(tty_drv, serial->minor); + release_minor(serial); } static void hso_serial_common_free(struct hso_serial *serial) @@ -2253,24 +2253,22 @@ static void hso_serial_common_free(struct hso_serial *serial) static int hso_serial_common_create(struct hso_serial *serial, int num_urbs, int rx_size, int tx_size) { - int minor; int i; tty_port_init(&serial->port); - minor = get_free_serial_index(); - if (minor < 0) + if (obtain_minor(serial)) goto exit2; /* register our minor number */ serial->parent->dev = tty_port_register_device_attr(&serial->port, - tty_drv, minor, &serial->parent->interface->dev, + tty_drv, serial->minor, &serial->parent->interface->dev, serial->parent, hso_serial_dev_groups); - if (IS_ERR(serial->parent->dev)) + if (IS_ERR(serial->parent->dev)) { + release_minor(serial); goto exit2; + } - /* fill in specific data for later use */ - serial->minor = minor; serial->magic = HSO_SERIAL_MAGIC; spin_lock_init(&serial->serial_lock); serial->num_rx_urbs = num_urbs; @@ -2667,9 +2665,6 @@ static struct hso_device *hso_create_bulk_serial_device( serial->write_data = hso_std_serial_write_data; - /* and record this serial */ - set_serial_by_index(serial->minor, serial); - /* setup the proc dirs and files if needed */ hso_log_port(hso_dev); @@ -2726,9 +2721,6 @@ struct hso_device *hso_create_mux_serial_device(struct usb_interface *interface, serial->shared_int->ref_count++; mutex_unlock(&serial->shared_int->shared_int_lock); - /* and record this serial */ - set_serial_by_index(serial->minor, serial); - /* setup the proc dirs and files if needed */ hso_log_port(hso_dev); @@ -3113,7 +3105,6 @@ static void hso_free_interface(struct usb_interface *interface) cancel_work_sync(&serial_table[i]->async_get_intf); hso_serial_tty_unregister(serial); kref_put(&serial_table[i]->ref, hso_serial_ref_free); - set_serial_by_index(i, NULL); } } -- cgit v1.2.3 From 50ce6826a48f119baf2794fa384a64efe9bd84a5 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Wed, 7 Apr 2021 02:06:06 +0300 Subject: clk: fixed: fix double free in resource managed fixed-factor clock devm_clk_hw_register_fixed_factor_release(), the release function for the devm_clk_hw_register_fixed_factor(), calls clk_hw_unregister_fixed_factor(), which will kfree() the clock. However after that the devres functions will also kfree the allocated data, resulting in double free/memory corruption. Just call clk_hw_unregister() instead, leaving kfree() to devres code. Reported-by: Rob Clark Cc: Daniel Palmer Signed-off-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20210406230606.3007138-1-dmitry.baryshkov@linaro.org Fixes: 0b9266d295ce ("clk: fixed: add devm helper for clk_hw_register_fixed_factor()") [sboyd@kernel.org: Remove ugly cast] Signed-off-by: Stephen Boyd --- drivers/clk/clk-fixed-factor.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/clk/clk-fixed-factor.c b/drivers/clk/clk-fixed-factor.c index 4f7bf3929d6d..4e4b6d367612 100644 --- a/drivers/clk/clk-fixed-factor.c +++ b/drivers/clk/clk-fixed-factor.c @@ -66,7 +66,14 @@ EXPORT_SYMBOL_GPL(clk_fixed_factor_ops); static void devm_clk_hw_register_fixed_factor_release(struct device *dev, void *res) { - clk_hw_unregister_fixed_factor(&((struct clk_fixed_factor *)res)->hw); + struct clk_fixed_factor *fix = res; + + /* + * We can not use clk_hw_unregister_fixed_factor, since it will kfree() + * the hw, resulting in double free. Just unregister the hw and let + * devres code kfree() it. + */ + clk_hw_unregister(&fix->hw); } static struct clk_hw * -- cgit v1.2.3 From b6a37a93c9ac3900987c79b726d0bb3699d8db4e Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 2 Apr 2021 10:23:17 +0200 Subject: drm/i915: Fix invalid access to ACPI _DSM objects MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit intel_dsm_platform_mux_info() tries to parse the ACPI package data from _DSM for the debug information, but it assumes the fixed format without checking what values are stored in the elements actually. When an unexpected value is returned from BIOS, it may lead to GPF or NULL dereference, as reported recently. Add the checks of the contents in the returned values and skip the values for invalid cases. v1->v2: Check the info contents before dereferencing, too BugLink: http://bugzilla.opensuse.org/show_bug.cgi?id=1184074 Cc: Signed-off-by: Takashi Iwai Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20210402082317.871-1-tiwai@suse.de (cherry picked from commit 337d7a1621c7f02af867229990ac67c97da1b53a) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/display/intel_acpi.c | 22 ++++++++++++++++++++-- 1 file changed, 20 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/display/intel_acpi.c b/drivers/gpu/drm/i915/display/intel_acpi.c index e21fb14d5e07..833d0c1be4f1 100644 --- a/drivers/gpu/drm/i915/display/intel_acpi.c +++ b/drivers/gpu/drm/i915/display/intel_acpi.c @@ -84,13 +84,31 @@ static void intel_dsm_platform_mux_info(acpi_handle dhandle) return; } + if (!pkg->package.count) { + DRM_DEBUG_DRIVER("no connection in _DSM\n"); + return; + } + connector_count = &pkg->package.elements[0]; DRM_DEBUG_DRIVER("MUX info connectors: %lld\n", (unsigned long long)connector_count->integer.value); for (i = 1; i < pkg->package.count; i++) { union acpi_object *obj = &pkg->package.elements[i]; - union acpi_object *connector_id = &obj->package.elements[0]; - union acpi_object *info = &obj->package.elements[1]; + union acpi_object *connector_id; + union acpi_object *info; + + if (obj->type != ACPI_TYPE_PACKAGE || obj->package.count < 2) { + DRM_DEBUG_DRIVER("Invalid object for MUX #%d\n", i); + continue; + } + + connector_id = &obj->package.elements[0]; + info = &obj->package.elements[1]; + if (info->type != ACPI_TYPE_BUFFER || info->buffer.length < 4) { + DRM_DEBUG_DRIVER("Invalid info for MUX obj #%d\n", i); + continue; + } + DRM_DEBUG_DRIVER("Connector id: 0x%016llx\n", (unsigned long long)connector_id->integer.value); DRM_DEBUG_DRIVER(" port id: %s\n", -- cgit v1.2.3 From e1ad897b9c738d5550be6762bf3a6ef1672259a4 Mon Sep 17 00:00:00 2001 From: Kamal Heib Date: Sun, 4 Apr 2021 15:55:01 +0300 Subject: RDMA/qedr: Fix kernel panic when trying to access recv_cq As INI QP does not require a recv_cq, avoid the following null pointer dereference by checking if the qp_type is not INI before trying to extract the recv_cq. BUG: kernel NULL pointer dereference, address: 00000000000000e0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 54250 Comm: mpitests-IMB-MP Not tainted 5.12.0-rc5 #1 Hardware name: Dell Inc. PowerEdge R320/0KM5PX, BIOS 2.7.0 08/19/2019 RIP: 0010:qedr_create_qp+0x378/0x820 [qedr] Code: 02 00 00 50 e8 29 d4 a9 d1 48 83 c4 18 e9 65 fe ff ff 48 8b 53 10 48 8b 43 18 44 8b 82 e0 00 00 00 45 85 c0 0f 84 10 74 00 00 <8b> b8 e0 00 00 00 85 ff 0f 85 50 fd ff ff e9 fd 73 00 00 48 8d bd RSP: 0018:ffff9c8f056f7a70 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff9c8f056f7b58 RCX: 0000000000000009 RDX: ffff8c41a9744c00 RSI: ffff9c8f056f7b58 RDI: ffff8c41c0dfa280 RBP: ffff8c41c0dfa280 R08: 0000000000000002 R09: 0000000000000001 R10: 0000000000000000 R11: ffff8c41e06fc608 R12: ffff8c4194052000 R13: 0000000000000000 R14: ffff8c4191546070 R15: ffff8c41c0dfa280 FS: 00007f78b2787b80(0000) GS:ffff8c43a3200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000e0 CR3: 00000001011d6002 CR4: 00000000001706f0 Call Trace: ib_uverbs_handler_UVERBS_METHOD_QP_CREATE+0x4e4/0xb90 [ib_uverbs] ? ib_uverbs_cq_event_handler+0x30/0x30 [ib_uverbs] ib_uverbs_run_method+0x6f6/0x7a0 [ib_uverbs] ? ib_uverbs_handler_UVERBS_METHOD_QP_DESTROY+0x70/0x70 [ib_uverbs] ? __cond_resched+0x15/0x30 ? __kmalloc+0x5a/0x440 ib_uverbs_cmd_verbs+0x195/0x360 [ib_uverbs] ? xa_load+0x6e/0x90 ? cred_has_capability+0x7c/0x130 ? avc_has_extended_perms+0x17f/0x440 ? vma_link+0xae/0xb0 ? vma_set_page_prot+0x2a/0x60 ? mmap_region+0x298/0x6c0 ? do_mmap+0x373/0x520 ? selinux_file_ioctl+0x17f/0x220 ib_uverbs_ioctl+0xa7/0x110 [ib_uverbs] __x64_sys_ioctl+0x84/0xc0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f78b120262b Fixes: 06e8d1df46ed ("RDMA/qedr: Add support for user mode XRC-SRQ's") Link: https://lore.kernel.org/r/20210404125501.154789-1-kamalheib1@gmail.com Signed-off-by: Kamal Heib Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/qedr/verbs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/qedr/verbs.c b/drivers/infiniband/hw/qedr/verbs.c index 0eb6a7a618e0..9ea542270ed4 100644 --- a/drivers/infiniband/hw/qedr/verbs.c +++ b/drivers/infiniband/hw/qedr/verbs.c @@ -1244,7 +1244,8 @@ static int qedr_check_qp_attrs(struct ib_pd *ibpd, struct qedr_dev *dev, * TGT QP isn't associated with RQ/SQ */ if ((attrs->qp_type != IB_QPT_GSI) && (dev->gsi_qp_created) && - (attrs->qp_type != IB_QPT_XRC_TGT)) { + (attrs->qp_type != IB_QPT_XRC_TGT) && + (attrs->qp_type != IB_QPT_XRC_INI)) { struct qedr_cq *send_cq = get_qedr_cq(attrs->send_cq); struct qedr_cq *recv_cq = get_qedr_cq(attrs->recv_cq); -- cgit v1.2.3 From 0dcf8febcb7b9d42bec98bc068e01d1a6ea578b8 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Tue, 6 Apr 2021 12:17:46 -0500 Subject: scsi: iscsi: Fix iSCSI cls conn state In commit 9e67600ed6b8 ("scsi: iscsi: Fix race condition between login and sync thread") I missed that libiscsi was now setting the iSCSI class state, and that patch ended up resetting the state during conn stoppage and using the wrong state value during ep_disconnect. This patch moves the setting of the class state to the class module and then fixes the two issues above. Link: https://lore.kernel.org/r/20210406171746.5016-1-michael.christie@oracle.com Fixes: 9e67600ed6b8 ("scsi: iscsi: Fix race condition between login and sync thread") Cc: Gulam Mohamed Signed-off-by: Mike Christie Signed-off-by: Martin K. Petersen --- drivers/scsi/libiscsi.c | 26 +++----------------------- drivers/scsi/scsi_transport_iscsi.c | 18 +++++++++++++++--- 2 files changed, 18 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 7ad11e42306d..bfd2aaa9b66b 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -3179,9 +3179,10 @@ fail_mgmt_tasks(struct iscsi_session *session, struct iscsi_conn *conn) } } -static void iscsi_start_session_recovery(struct iscsi_session *session, - struct iscsi_conn *conn, int flag) +void iscsi_conn_stop(struct iscsi_cls_conn *cls_conn, int flag) { + struct iscsi_conn *conn = cls_conn->dd_data; + struct iscsi_session *session = conn->session; int old_stop_stage; mutex_lock(&session->eh_mutex); @@ -3239,27 +3240,6 @@ static void iscsi_start_session_recovery(struct iscsi_session *session, spin_unlock_bh(&session->frwd_lock); mutex_unlock(&session->eh_mutex); } - -void iscsi_conn_stop(struct iscsi_cls_conn *cls_conn, int flag) -{ - struct iscsi_conn *conn = cls_conn->dd_data; - struct iscsi_session *session = conn->session; - - switch (flag) { - case STOP_CONN_RECOVER: - cls_conn->state = ISCSI_CONN_FAILED; - break; - case STOP_CONN_TERM: - cls_conn->state = ISCSI_CONN_DOWN; - break; - default: - iscsi_conn_printk(KERN_ERR, conn, - "invalid stop flag %d\n", flag); - return; - } - - iscsi_start_session_recovery(session, conn, flag); -} EXPORT_SYMBOL_GPL(iscsi_conn_stop); int iscsi_conn_bind(struct iscsi_cls_session *cls_session, diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index bebfb355abdf..21a2d997a72e 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -2470,10 +2470,22 @@ static void iscsi_if_stop_conn(struct iscsi_cls_conn *conn, int flag) * it works. */ mutex_lock(&conn_mutex); + switch (flag) { + case STOP_CONN_RECOVER: + conn->state = ISCSI_CONN_FAILED; + break; + case STOP_CONN_TERM: + conn->state = ISCSI_CONN_DOWN; + break; + default: + iscsi_cls_conn_printk(KERN_ERR, conn, + "invalid stop flag %d\n", flag); + goto unlock; + } + conn->transport->stop_conn(conn, flag); - conn->state = ISCSI_CONN_DOWN; +unlock: mutex_unlock(&conn_mutex); - } static void stop_conn_work_fn(struct work_struct *work) @@ -2961,7 +2973,7 @@ static int iscsi_if_ep_disconnect(struct iscsi_transport *transport, mutex_lock(&conn->ep_mutex); conn->ep = NULL; mutex_unlock(&conn->ep_mutex); - conn->state = ISCSI_CONN_DOWN; + conn->state = ISCSI_CONN_FAILED; } transport->ep_disconnect(ep); -- cgit v1.2.3 From 176ddd89171ddcf661862d90c5d257877f7326d6 Mon Sep 17 00:00:00 2001 From: Jolly Shah Date: Thu, 18 Mar 2021 15:56:32 -0700 Subject: scsi: libsas: Reset num_scatter if libata marks qc as NODATA When the cache_type for the SCSI device is changed, the SCSI layer issues a MODE_SELECT command. The caching mode details are communicated via a request buffer associated with the SCSI command with data direction set as DMA_TO_DEVICE (scsi_mode_select()). When this command reaches the libata layer, as a part of generic initial setup, libata layer sets up the scatterlist for the command using the SCSI command (ata_scsi_qc_new()). This command is then translated by the libata layer into ATA_CMD_SET_FEATURES (ata_scsi_mode_select_xlat()). The libata layer treats this as a non-data command (ata_mselect_caching()), since it only needs an ATA taskfile to pass the caching on/off information to the device. It does not need the scatterlist that has been setup, so it does not perform dma_map_sg() on the scatterlist (ata_qc_issue()). Unfortunately, when this command reaches the libsas layer (sas_ata_qc_issue()), libsas layer sees it as a non-data command with a scatterlist. It cannot extract the correct DMA length since the scatterlist has not been mapped with dma_map_sg() for a DMA operation. When this partially constructed SAS task reaches pm80xx LLDD, it results in the following warning: "pm80xx_chip_sata_req 6058: The sg list address start_addr=0x0000000000000000 data_len=0x0end_addr_high=0xffffffff end_addr_low=0xffffffff has crossed 4G boundary" Update libsas to handle ATA non-data commands separately so num_scatter and total_xfer_len remain 0. Link: https://lore.kernel.org/r/20210318225632.2481291-1-jollys@google.com Fixes: 53de092f47ff ("scsi: libsas: Set data_dir as DMA_NONE if libata marks qc as NODATA") Tested-by: Luo Jiaxing Reviewed-by: John Garry Signed-off-by: Jolly Shah Signed-off-by: Martin K. Petersen --- drivers/scsi/libsas/sas_ata.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index 024e5a550759..8b9a39077dba 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -201,18 +201,17 @@ static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc) memcpy(task->ata_task.atapi_packet, qc->cdb, qc->dev->cdb_len); task->total_xfer_len = qc->nbytes; task->num_scatter = qc->n_elem; + task->data_dir = qc->dma_dir; + } else if (qc->tf.protocol == ATA_PROT_NODATA) { + task->data_dir = DMA_NONE; } else { for_each_sg(qc->sg, sg, qc->n_elem, si) xfer += sg_dma_len(sg); task->total_xfer_len = xfer; task->num_scatter = si; - } - - if (qc->tf.protocol == ATA_PROT_NODATA) - task->data_dir = DMA_NONE; - else task->data_dir = qc->dma_dir; + } task->scatter = qc->sg; task->ata_task.retry_count = 1; task->task_state_flags = SAS_TASK_STATE_PENDING; -- cgit v1.2.3 From 1b0b6e939f112949089e32ec89fd27796677263a Mon Sep 17 00:00:00 2001 From: xinhui pan Date: Wed, 7 Apr 2021 19:29:39 +0800 Subject: drm/amdgpu: Fix size overflow MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit ttm->num_pages is uint32. Hit overflow when << PAGE_SHIFT directly Fixes: 230c079fdcf4 ("drm/ttm: make num_pages uint32_t") Signed-off-by: xinhui pan Reviewed-by: Christian König Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c index 9fd2157b133a..5efa331e3ee8 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c @@ -906,7 +906,7 @@ static int amdgpu_ttm_tt_pin_userptr(struct ttm_bo_device *bdev, /* Allocate an SG array and squash pages into it */ r = sg_alloc_table_from_pages(ttm->sg, ttm->pages, ttm->num_pages, 0, - ttm->num_pages << PAGE_SHIFT, + (u64)ttm->num_pages << PAGE_SHIFT, GFP_KERNEL); if (r) goto release_sg; -- cgit v1.2.3 From 2efc021060c2aa55e1e8f7b98249d3ea63232fc7 Mon Sep 17 00:00:00 2001 From: xinhui pan Date: Wed, 7 Apr 2021 20:57:50 +0800 Subject: drm/radeon: Fix size overflow MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit ttm->num_pages is uint32. Hit overflow when << PAGE_SHIFT directly Fixes: 230c079fdcf4 ("drm/ttm: make num_pages uint32_t") Signed-off-by: xinhui pan Reviewed-by: Christian König Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_ttm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c index e8c66d10478f..78893bea85ae 100644 --- a/drivers/gpu/drm/radeon/radeon_ttm.c +++ b/drivers/gpu/drm/radeon/radeon_ttm.c @@ -364,7 +364,7 @@ static int radeon_ttm_tt_pin_userptr(struct ttm_bo_device *bdev, struct ttm_tt * if (gtt->userflags & RADEON_GEM_USERPTR_ANONONLY) { /* check that we only pin down anonymous memory to prevent problems with writeback */ - unsigned long end = gtt->userptr + ttm->num_pages * PAGE_SIZE; + unsigned long end = gtt->userptr + (u64)ttm->num_pages * PAGE_SIZE; struct vm_area_struct *vma; vma = find_vma(gtt->usermm, gtt->userptr); if (!vma || vma->vm_file || vma->vm_end < end) @@ -386,7 +386,7 @@ static int radeon_ttm_tt_pin_userptr(struct ttm_bo_device *bdev, struct ttm_tt * } while (pinned < ttm->num_pages); r = sg_alloc_table_from_pages(ttm->sg, ttm->pages, ttm->num_pages, 0, - ttm->num_pages << PAGE_SHIFT, + (u64)ttm->num_pages << PAGE_SHIFT, GFP_KERNEL); if (r) goto release_sg; -- cgit v1.2.3 From cdcc108a2aced5f9cbc45920e29bf49819e5477f Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 7 Apr 2021 09:28:23 -0400 Subject: drm/amdgpu/smu7: fix CAC setting on TOPAZ We need to enable MC CAC for mclk switching to work. Fixes: d765129a719f ("drm/amd/pm: correct sclk/mclk dpm enablement") Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1561 Tested-by: Konstantin Kharlamov Reviewed-by: Evan Quan Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_hwmgr.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_hwmgr.c index d0ec83881fc5..c0565a932a12 100644 --- a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_hwmgr.c +++ b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_hwmgr.c @@ -1224,7 +1224,8 @@ static int smu7_enable_sclk_mclk_dpm(struct pp_hwmgr *hwmgr) (hwmgr->chip_id == CHIP_POLARIS10) || (hwmgr->chip_id == CHIP_POLARIS11) || (hwmgr->chip_id == CHIP_POLARIS12) || - (hwmgr->chip_id == CHIP_TONGA)) + (hwmgr->chip_id == CHIP_TONGA) || + (hwmgr->chip_id == CHIP_TOPAZ)) PHM_WRITE_FIELD(hwmgr->device, MC_SEQ_CNTL_3, CAC_EN, 0x1); -- cgit v1.2.3 From b57aa17f07c9270e576ef7df09f142978b5a75f0 Mon Sep 17 00:00:00 2001 From: "A. Cody Schuffelen" Date: Thu, 18 Mar 2021 13:04:19 -0700 Subject: virt_wifi: Return micros for BSS TSF values cfg80211_inform_bss expects to receive a TSF value, but is given the time since boot in nanoseconds. TSF values are expected to be at microsecond scale rather than nanosecond scale. Signed-off-by: A. Cody Schuffelen Link: https://lore.kernel.org/r/20210318200419.1421034-1-schuffelen@google.com Signed-off-by: Johannes Berg --- drivers/net/wireless/virt_wifi.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/virt_wifi.c b/drivers/net/wireless/virt_wifi.c index c878097f0dda..1df959532c7d 100644 --- a/drivers/net/wireless/virt_wifi.c +++ b/drivers/net/wireless/virt_wifi.c @@ -12,6 +12,7 @@ #include #include #include +#include #include static struct wiphy *common_wiphy; @@ -168,11 +169,11 @@ static void virt_wifi_scan_result(struct work_struct *work) scan_result.work); struct wiphy *wiphy = priv_to_wiphy(priv); struct cfg80211_scan_info scan_info = { .aborted = false }; + u64 tsf = div_u64(ktime_get_boottime_ns(), 1000); informed_bss = cfg80211_inform_bss(wiphy, &channel_5ghz, CFG80211_BSS_FTYPE_PRESP, - fake_router_bssid, - ktime_get_boottime_ns(), + fake_router_bssid, tsf, WLAN_CAPABILITY_ESS, 0, (void *)&ssid, sizeof(ssid), DBM_TO_MBM(-50), GFP_KERNEL); -- cgit v1.2.3 From 35d65ab3fdba1bdecde9ac3424d6d634ea038729 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Thu, 18 Mar 2021 17:13:27 +0100 Subject: drm/vc4: plane: Remove redundant assignment The vc4_plane_atomic_async_update function assigns twice in a row the src_h field in the drm_plane_state structure to the same value. Remove the second one. Reviewed-by: Dave Stevenson Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20210318161328.1471556-2-maxime@cerno.tech --- drivers/gpu/drm/vc4/vc4_plane.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/vc4/vc4_plane.c b/drivers/gpu/drm/vc4/vc4_plane.c index 7322169c0682..1e9c84cf614a 100644 --- a/drivers/gpu/drm/vc4/vc4_plane.c +++ b/drivers/gpu/drm/vc4/vc4_plane.c @@ -1146,7 +1146,6 @@ static void vc4_plane_atomic_async_update(struct drm_plane *plane, plane->state->src_y = state->src_y; plane->state->src_w = state->src_w; plane->state->src_h = state->src_h; - plane->state->src_h = state->src_h; plane->state->alpha = state->alpha; plane->state->pixel_blend_mode = state->pixel_blend_mode; plane->state->rotation = state->rotation; -- cgit v1.2.3 From eb9dfdd1ed40357b99a4201c8534c58c562e48c9 Mon Sep 17 00:00:00 2001 From: Dom Cobley Date: Thu, 18 Mar 2021 17:13:28 +0100 Subject: drm/vc4: crtc: Reduce PV fifo threshold on hvs4 Experimentally have found PV on hvs4 reports fifo full error with expected settings and does not with one less This appears as: [drm:drm_atomic_helper_wait_for_flip_done] *ERROR* [CRTC:82:crtc-3] flip_done timed out with bit 10 of PV_STAT set "HVS driving pixels when the PV FIFO is full" Fixes: c8b75bca92cb ("drm/vc4: Add KMS support for Raspberry Pi.") Signed-off-by: Dom Cobley Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20210318161328.1471556-3-maxime@cerno.tech --- drivers/gpu/drm/vc4/vc4_crtc.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c index 269390bc586e..76657dcdf9b0 100644 --- a/drivers/gpu/drm/vc4/vc4_crtc.c +++ b/drivers/gpu/drm/vc4/vc4_crtc.c @@ -210,6 +210,7 @@ static u32 vc4_get_fifo_full_level(struct vc4_crtc *vc4_crtc, u32 format) { const struct vc4_crtc_data *crtc_data = vc4_crtc_to_vc4_crtc_data(vc4_crtc); const struct vc4_pv_data *pv_data = vc4_crtc_to_vc4_pv_data(vc4_crtc); + struct vc4_dev *vc4 = to_vc4_dev(vc4_crtc->base.dev); u32 fifo_len_bytes = pv_data->fifo_depth; /* @@ -238,6 +239,22 @@ static u32 vc4_get_fifo_full_level(struct vc4_crtc *vc4_crtc, u32 format) if (crtc_data->hvs_output == 5) return 32; + /* + * It looks like in some situations, we will overflow + * the PixelValve FIFO (with the bit 10 of PV stat being + * set) and stall the HVS / PV, eventually resulting in + * a page flip timeout. + * + * Displaying the video overlay during a playback with + * Kodi on an RPi3 seems to be a great solution with a + * failure rate around 50%. + * + * Removing 1 from the FIFO full level however + * seems to completely remove that issue. + */ + if (!vc4->hvs->hvs5) + return fifo_len_bytes - 3 * HVS_FIFO_LATENCY_PIX - 1; + return fifo_len_bytes - 3 * HVS_FIFO_LATENCY_PIX; } } -- cgit v1.2.3 From b2d0efc4be7ed320e33eaa9b6dd6f3f6011ffb8e Mon Sep 17 00:00:00 2001 From: Grzegorz Siwik Date: Wed, 24 Mar 2021 09:58:27 +0100 Subject: i40e: Fix parameters in aq_get_phy_register() Change parameters order in aq_get_phy_register() due to wrong statistics in PHY reported by ethtool. Previously all PHY statistics were exactly the same for all interfaces Now statistics are reported correctly - different for different interfaces Fixes: 0514db37dd78 ("i40e: Extend PHY access with page change flag") Signed-off-by: Grzegorz Siwik Tested-by: Dave Switzer Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c index 96d5202a73e8..0e92668012e3 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c +++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c @@ -5480,7 +5480,7 @@ static int i40e_get_module_eeprom(struct net_device *netdev, status = i40e_aq_get_phy_register(hw, I40E_AQ_PHY_REG_ACCESS_EXTERNAL_MODULE, - true, addr, offset, &value, NULL); + addr, true, offset, &value, NULL); if (status) return -EIO; data[i] = value; -- cgit v1.2.3 From 12738ac4754ec92a6a45bf3677d8da780a1412b3 Mon Sep 17 00:00:00 2001 From: Arkadiusz Kubalewski Date: Fri, 26 Mar 2021 19:43:40 +0100 Subject: i40e: Fix sparse errors in i40e_txrx.c Remove error handling through pointers. Instead use plain int to return value from i40e_run_xdp(...). Previously: - sparse errors were produced during compilation: i40e_txrx.c:2338 i40e_run_xdp() error: (-2147483647) too low for ERR_PTR i40e_txrx.c:2558 i40e_clean_rx_irq() error: 'skb' dereferencing possible ERR_PTR() - sk_buff* was used to return value, but it has never had valid pointer to sk_buff. Returned value was always int handled as a pointer. Fixes: 0c8493d90b6b ("i40e: add XDP support for pass and drop actions") Fixes: 2e6893123830 ("i40e: split XDP_TX tail and XDP_REDIRECT map flushing") Signed-off-by: Aleksandr Loktionov Signed-off-by: Arkadiusz Kubalewski Tested-by: Dave Switzer Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/i40e/i40e_txrx.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c index 5747a99122fb..06b4271219b1 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c @@ -2295,8 +2295,7 @@ int i40e_xmit_xdp_tx_ring(struct xdp_buff *xdp, struct i40e_ring *xdp_ring) * @rx_ring: Rx ring being processed * @xdp: XDP buffer containing the frame **/ -static struct sk_buff *i40e_run_xdp(struct i40e_ring *rx_ring, - struct xdp_buff *xdp) +static int i40e_run_xdp(struct i40e_ring *rx_ring, struct xdp_buff *xdp) { int err, result = I40E_XDP_PASS; struct i40e_ring *xdp_ring; @@ -2335,7 +2334,7 @@ static struct sk_buff *i40e_run_xdp(struct i40e_ring *rx_ring, } xdp_out: rcu_read_unlock(); - return ERR_PTR(-result); + return result; } /** @@ -2448,6 +2447,7 @@ static int i40e_clean_rx_irq(struct i40e_ring *rx_ring, int budget) unsigned int xdp_xmit = 0; bool failure = false; struct xdp_buff xdp; + int xdp_res = 0; #if (PAGE_SIZE < 8192) frame_sz = i40e_rx_frame_truesize(rx_ring, 0); @@ -2513,12 +2513,10 @@ static int i40e_clean_rx_irq(struct i40e_ring *rx_ring, int budget) /* At larger PAGE_SIZE, frame_sz depend on len size */ xdp.frame_sz = i40e_rx_frame_truesize(rx_ring, size); #endif - skb = i40e_run_xdp(rx_ring, &xdp); + xdp_res = i40e_run_xdp(rx_ring, &xdp); } - if (IS_ERR(skb)) { - unsigned int xdp_res = -PTR_ERR(skb); - + if (xdp_res) { if (xdp_res & (I40E_XDP_TX | I40E_XDP_REDIR)) { xdp_xmit |= xdp_res; i40e_rx_buffer_flip(rx_ring, rx_buffer, size); -- cgit v1.2.3 From d6d04ee6d2c9bb5084c8f6074195d6aa0024e825 Mon Sep 17 00:00:00 2001 From: Arkadiusz Kubalewski Date: Fri, 26 Mar 2021 19:43:41 +0100 Subject: i40e: Fix sparse error: uninitialized symbol 'ring' Init pointer with NULL in default switch case statement. Previously the error was produced when compiling against sparse. i40e_debugfs.c:582 i40e_dbg_dump_desc() error: uninitialized symbol 'ring'. Fixes: 44ea803e2fa7 ("i40e: introduce new dump desc XDP command") Signed-off-by: Aleksandr Loktionov Signed-off-by: Arkadiusz Kubalewski Tested-by: Dave Switzer Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/i40e/i40e_debugfs.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c index d7c13ca9be7d..d627b59ad446 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c +++ b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c @@ -578,6 +578,9 @@ static void i40e_dbg_dump_desc(int cnt, int vsi_seid, int ring_id, int desc_n, case RING_TYPE_XDP: ring = kmemdup(vsi->xdp_rings[ring_id], sizeof(*ring), GFP_KERNEL); break; + default: + ring = NULL; + break; } if (!ring) return; -- cgit v1.2.3 From 6b5674fe6b9bf05394886ebcec62b2d7dae88c42 Mon Sep 17 00:00:00 2001 From: Arkadiusz Kubalewski Date: Fri, 26 Mar 2021 19:43:42 +0100 Subject: i40e: Fix sparse error: 'vsi->netdev' could be null Remove vsi->netdev->name from the trace. This is redundant information. With the devinfo trace, the adapter is already identifiable. Previously following error was produced when compiling against sparse. i40e_main.c:2571 i40e_sync_vsi_filters() error: we previously assumed 'vsi->netdev' could be null (see line 2323) Fixes: b603f9dc20af ("i40e: Log info when PF is entering and leaving Allmulti mode.") Signed-off-by: Aleksandr Loktionov Signed-off-by: Arkadiusz Kubalewski Tested-by: Dave Switzer Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/i40e/i40e_main.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index af6c25fa493c..c0a4bc2caae9 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -2560,8 +2560,7 @@ int i40e_sync_vsi_filters(struct i40e_vsi *vsi) i40e_stat_str(hw, aq_ret), i40e_aq_str(hw, hw->aq.asq_last_status)); } else { - dev_info(&pf->pdev->dev, "%s is %s allmulti mode.\n", - vsi->netdev->name, + dev_info(&pf->pdev->dev, "%s allmulti mode.\n", cur_multipromisc ? "entering" : "leaving"); } } -- cgit v1.2.3 From 8a1e918d833ca5c391c4ded5dc006e2d1ce6d37c Mon Sep 17 00:00:00 2001 From: Arkadiusz Kubalewski Date: Fri, 26 Mar 2021 19:43:43 +0100 Subject: i40e: Fix sparse warning: missing error code 'err' Set proper return values inside error checking if-statements. Previously following warning was produced when compiling against sparse. i40e_main.c:15162 i40e_init_recovery_mode() warn: missing error code 'err' Fixes: 4ff0ee1af0169 ("i40e: Introduce recovery mode support") Signed-off-by: Aleksandr Loktionov Signed-off-by: Arkadiusz Kubalewski Tested-by: Dave Switzer Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/i40e/i40e_main.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index c0a4bc2caae9..30ad7c08d0fb 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -15138,12 +15138,16 @@ static int i40e_init_recovery_mode(struct i40e_pf *pf, struct i40e_hw *hw) * in order to register the netdev */ v_idx = i40e_vsi_mem_alloc(pf, I40E_VSI_MAIN); - if (v_idx < 0) + if (v_idx < 0) { + err = v_idx; goto err_switch_setup; + } pf->lan_vsi = v_idx; vsi = pf->vsi[v_idx]; - if (!vsi) + if (!vsi) { + err = -EFAULT; goto err_switch_setup; + } vsi->alloc_queue_pairs = 1; err = i40e_config_netdev(vsi); if (err) -- cgit v1.2.3 From 1831da7ea5bdf5531d78bcf81f526faa4c4375fa Mon Sep 17 00:00:00 2001 From: Yongxin Liu Date: Thu, 1 Apr 2021 11:59:15 -0700 Subject: ice: fix memory leak of aRFS after resuming from suspend In ice_suspend(), ice_clear_interrupt_scheme() is called, and then irq_free_descs() will be eventually called to free irq and its descriptor. In ice_resume(), ice_init_interrupt_scheme() is called to allocate new irqs. However, in ice_rebuild_arfs(), struct irq_glue and struct cpu_rmap maybe cannot be freed, if the irqs that released in ice_suspend() were reassigned to other devices, which makes irq descriptor's affinity_notify lost. So call ice_free_cpu_rx_rmap() before ice_clear_interrupt_scheme(), which can make sure all irq_glue and cpu_rmap can be correctly released before corresponding irq and descriptor are released. Fix the following memory leak. unreferenced object 0xffff95bd951afc00 (size 512): comm "kworker/0:1", pid 134, jiffies 4294684283 (age 13051.958s) hex dump (first 32 bytes): 18 00 00 00 18 00 18 00 70 fc 1a 95 bd 95 ff ff ........p....... 00 00 ff ff 01 00 ff ff 02 00 ff ff 03 00 ff ff ................ backtrace: [<0000000072e4b914>] __kmalloc+0x336/0x540 [<0000000054642a87>] alloc_cpu_rmap+0x3b/0xb0 [<00000000f220deec>] ice_set_cpu_rx_rmap+0x6a/0x110 [ice] [<000000002370a632>] ice_probe+0x941/0x1180 [ice] [<00000000d692edba>] local_pci_probe+0x47/0xa0 [<00000000503934f0>] work_for_cpu_fn+0x1a/0x30 [<00000000555a9e4a>] process_one_work+0x1dd/0x410 [<000000002c4b414a>] worker_thread+0x221/0x3f0 [<00000000bb2b556b>] kthread+0x14c/0x170 [<00000000ad2cf1cd>] ret_from_fork+0x1f/0x30 unreferenced object 0xffff95bd81b0a2a0 (size 96): comm "kworker/0:1", pid 134, jiffies 4294684283 (age 13051.958s) hex dump (first 32 bytes): 38 00 00 00 01 00 00 00 e0 ff ff ff 0f 00 00 00 8............... b0 a2 b0 81 bd 95 ff ff b0 a2 b0 81 bd 95 ff ff ................ backtrace: [<00000000582dd5c5>] kmem_cache_alloc_trace+0x31f/0x4c0 [<000000002659850d>] irq_cpu_rmap_add+0x25/0xe0 [<00000000495a3055>] ice_set_cpu_rx_rmap+0xb4/0x110 [ice] [<000000002370a632>] ice_probe+0x941/0x1180 [ice] [<00000000d692edba>] local_pci_probe+0x47/0xa0 [<00000000503934f0>] work_for_cpu_fn+0x1a/0x30 [<00000000555a9e4a>] process_one_work+0x1dd/0x410 [<000000002c4b414a>] worker_thread+0x221/0x3f0 [<00000000bb2b556b>] kthread+0x14c/0x170 [<00000000ad2cf1cd>] ret_from_fork+0x1f/0x30 Fixes: 769c500dcc1e ("ice: Add advanced power mgmt for WoL") Signed-off-by: Yongxin Liu Tested-by: Tony Brelinski Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice_main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c index 9f1adff85be7..d821c687f239 100644 --- a/drivers/net/ethernet/intel/ice/ice_main.c +++ b/drivers/net/ethernet/intel/ice/ice_main.c @@ -4564,6 +4564,7 @@ static int __maybe_unused ice_suspend(struct device *dev) continue; ice_vsi_free_q_vectors(pf->vsi[v]); } + ice_free_cpu_rx_rmap(ice_get_main_vsi(pf)); ice_clear_interrupt_scheme(pf); pci_save_state(pdev); -- cgit v1.2.3 From d1c803a9ccd7bd3aff5e989ccfb39ed3b799b975 Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Mon, 5 Apr 2021 10:44:34 +0300 Subject: RDMA/addr: Be strict with gid size The nla_len() is less than or equal to 16. If it's less than 16 then end of the "gid" buffer is uninitialized. Fixes: ae43f8286730 ("IB/core: Add IP to GID netlink offload") Link: https://lore.kernel.org/r/20210405074434.264221-1-leon@kernel.org Reported-by: Dan Carpenter Signed-off-by: Mark Bloch Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/addr.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/addr.c b/drivers/infiniband/core/addr.c index 0abce004a959..65e3e7df8a4b 100644 --- a/drivers/infiniband/core/addr.c +++ b/drivers/infiniband/core/addr.c @@ -76,7 +76,9 @@ static struct workqueue_struct *addr_wq; static const struct nla_policy ib_nl_addr_policy[LS_NLA_TYPE_MAX] = { [LS_NLA_TYPE_DGID] = {.type = NLA_BINARY, - .len = sizeof(struct rdma_nla_ls_gid)}, + .len = sizeof(struct rdma_nla_ls_gid), + .validation_type = NLA_VALIDATE_MIN, + .min = sizeof(struct rdma_nla_ls_gid)}, }; static inline bool ib_nl_is_good_ip_resp(const struct nlmsghdr *nlh) -- cgit v1.2.3 From 48d499bd89191b359a6dbe44d32107e3021571c2 Mon Sep 17 00:00:00 2001 From: Frank Rowand Date: Thu, 8 Apr 2021 15:45:08 -0500 Subject: of: unittest: overlay: ensure proper alignment of copied FDT The Devicetree standard specifies an 8 byte alignment of the FDT. Code in libfdt expects this alignment for an FDT image in memory. kmemdup() returns 4 byte alignment on openrisc. Replace kmemdup() with kmalloc(), align pointer, memcpy() to get proper alignment. The 4 byte alignment exposed a related bug which triggered a crash on openrisc with: commit 79edff12060f ("scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9") as reported in: https://lore.kernel.org/lkml/20210327224116.69309-1-linux@roeck-us.net/ Reported-by: Guenter Roeck Signed-off-by: Frank Rowand Link: https://lore.kernel.org/r/20210408204508.2276230-1-frowand.list@gmail.com Signed-off-by: Rob Herring --- drivers/of/of_private.h | 2 ++ drivers/of/overlay.c | 22 ++++++++++++++-------- drivers/of/unittest.c | 9 +++++++-- 3 files changed, 23 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/of/of_private.h b/drivers/of/of_private.h index d9e6a324de0a..d717efbd637d 100644 --- a/drivers/of/of_private.h +++ b/drivers/of/of_private.h @@ -8,6 +8,8 @@ * Copyright (C) 1996-2005 Paul Mackerras. */ +#define FDT_ALIGN_SIZE 8 + /** * struct alias_prop - Alias property in 'aliases' node * @link: List node to link the structure in aliases_lookup list diff --git a/drivers/of/overlay.c b/drivers/of/overlay.c index e12c643b6ba8..23effe5e50ec 100644 --- a/drivers/of/overlay.c +++ b/drivers/of/overlay.c @@ -57,7 +57,7 @@ struct fragment { * struct overlay_changeset * @id: changeset identifier * @ovcs_list: list on which we are located - * @fdt: FDT that was unflattened to create @overlay_tree + * @fdt: base of memory allocated to hold aligned FDT that was unflattened to create @overlay_tree * @overlay_tree: expanded device tree that contains the fragment nodes * @count: count of fragment structures * @fragments: fragment nodes in the overlay expanded device tree @@ -719,8 +719,8 @@ static struct device_node *find_target(struct device_node *info_node) /** * init_overlay_changeset() - initialize overlay changeset from overlay tree * @ovcs: Overlay changeset to build - * @fdt: the FDT that was unflattened to create @tree - * @tree: Contains all the overlay fragments and overlay fixup nodes + * @fdt: base of memory allocated to hold aligned FDT that was unflattened to create @tree + * @tree: Contains the overlay fragments and overlay fixup nodes * * Initialize @ovcs. Populate @ovcs->fragments with node information from * the top level of @tree. The relevant top level nodes are the fragment @@ -873,7 +873,7 @@ static void free_overlay_changeset(struct overlay_changeset *ovcs) * internal documentation * * of_overlay_apply() - Create and apply an overlay changeset - * @fdt: the FDT that was unflattened to create @tree + * @fdt: base of memory allocated to hold the aligned FDT * @tree: Expanded overlay device tree * @ovcs_id: Pointer to overlay changeset id * @@ -953,7 +953,9 @@ static int of_overlay_apply(const void *fdt, struct device_node *tree, /* * after overlay_notify(), ovcs->overlay_tree related pointers may have * leaked to drivers, so can not kfree() tree, aka ovcs->overlay_tree; - * and can not free fdt, aka ovcs->fdt + * and can not free memory containing aligned fdt. The aligned fdt + * is contained within the memory at ovcs->fdt, possibly at an offset + * from ovcs->fdt. */ ret = overlay_notify(ovcs, OF_OVERLAY_PRE_APPLY); if (ret) { @@ -1014,7 +1016,8 @@ out: int of_overlay_fdt_apply(const void *overlay_fdt, u32 overlay_fdt_size, int *ovcs_id) { - const void *new_fdt; + void *new_fdt; + void *new_fdt_align; int ret; u32 size; struct device_node *overlay_root = NULL; @@ -1036,11 +1039,14 @@ int of_overlay_fdt_apply(const void *overlay_fdt, u32 overlay_fdt_size, * Must create permanent copy of FDT because of_fdt_unflatten_tree() * will create pointers to the passed in FDT in the unflattened tree. */ - new_fdt = kmemdup(overlay_fdt, size, GFP_KERNEL); + new_fdt = kmalloc(size + FDT_ALIGN_SIZE, GFP_KERNEL); if (!new_fdt) return -ENOMEM; - of_fdt_unflatten_tree(new_fdt, NULL, &overlay_root); + new_fdt_align = PTR_ALIGN(new_fdt, FDT_ALIGN_SIZE); + memcpy(new_fdt_align, overlay_fdt, size); + + of_fdt_unflatten_tree(new_fdt_align, NULL, &overlay_root); if (!overlay_root) { pr_err("unable to unflatten overlay_fdt\n"); ret = -EINVAL; diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c index f9b5b698249f..819a20acaa93 100644 --- a/drivers/of/unittest.c +++ b/drivers/of/unittest.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -1408,6 +1409,7 @@ static void attach_node_and_children(struct device_node *np) static int __init unittest_data_add(void) { void *unittest_data; + void *unittest_data_align; struct device_node *unittest_data_node = NULL, *np; /* * __dtb_testcases_begin[] and __dtb_testcases_end[] are magically @@ -1425,11 +1427,14 @@ static int __init unittest_data_add(void) } /* creating copy */ - unittest_data = kmemdup(__dtb_testcases_begin, size, GFP_KERNEL); + unittest_data = kmalloc(size + FDT_ALIGN_SIZE, GFP_KERNEL); if (!unittest_data) return -ENOMEM; - ret = of_fdt_unflatten_tree(unittest_data, NULL, &unittest_data_node); + unittest_data_align = PTR_ALIGN(unittest_data, FDT_ALIGN_SIZE); + memcpy(unittest_data_align, __dtb_testcases_begin, size); + + ret = of_fdt_unflatten_tree(unittest_data_align, NULL, &unittest_data_node); if (!ret) { pr_warn("%s: unflatten testcases tree failed\n", __func__); kfree(unittest_data); -- cgit v1.2.3 From 3e9005be87777afc902b9f5497495898202d335d Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Thu, 8 Apr 2021 20:38:27 +0200 Subject: net: dsa: lantiq_gswip: Don't use PHY auto polling PHY auto polling on the GSWIP hardware can be used so link changes (speed, link up/down, etc.) can be detected automatically. Internally GSWIP reads the PHY's registers for this functionality. Based on this automatic detection GSWIP can also automatically re-configure it's port settings. Unfortunately this auto polling (and configuration) mechanism seems to cause various issues observed by different people on different devices: - FritzBox 7360v2: the two Gbit/s ports (connected to the two internal PHY11G instances) are working fine but the two Fast Ethernet ports (using an AR8030 RMII PHY) are completely dead (neither RX nor TX are received). It turns out that the AR8030 PHY sets the BMSR_ESTATEN bit as well as the ESTATUS_1000_TFULL and ESTATUS_1000_XFULL bits. This makes the PHY auto polling state machine (rightfully?) think that the established link speed (when the other side is Gbit/s capable) is 1Gbit/s. - None of the Ethernet ports on the Zyxel P-2812HNU-F1 (two are connected to the internal PHY11G GPHYs while the other three are external RGMII PHYs) are working. Neither RX nor TX traffic was observed. It is not clear which part of the PHY auto polling state- machine caused this. - FritzBox 7412 (only one LAN port which is connected to one of the internal GPHYs running in PHY22F / Fast Ethernet mode) was seeing random disconnects (link down events could be seen). Sometimes all traffic would stop after such disconnect. It is not clear which part of the PHY auto polling state-machine cauased this. - TP-Link TD-W9980 (two ports are connected to the internal GPHYs running in PHY11G / Gbit/s mode, the other two are external RGMII PHYs) was affected by similar issues as the FritzBox 7412 just without the "link down" events Switch to software based configuration instead of PHY auto polling (and letting the GSWIP hardware configure the ports automatically) for the following link parameters: - link up/down - link speed - full/half duplex - flow control (RX / TX pause) After a big round of manual testing by various people (who helped test this on OpenWrt) it turns out that this fixes all reported issues. Additionally it can be considered more future proof because any "quirk" which is implemented for a PHY on the driver side can now be used with the GSWIP hardware as well because Linux is in control of the link parameters. As a nice side-effect this also solves a problem where fixed-links were not supported previously because we were relying on the PHY auto polling mechanism, which cannot work for fixed-links as there's no PHY from where it can read the registers. Configuring the link settings on the GSWIP ports means that we now use the settings from device-tree also for ports with fixed-links. Fixes: 14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Fixes: 3e6fdeb28f4c33 ("net: dsa: lantiq_gswip: Let GSWIP automatically set the xMII clock") Cc: stable@vger.kernel.org Acked-by: Hauke Mehrtens Reviewed-by: Andrew Lunn Signed-off-by: Martin Blumenstingl Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/dsa/lantiq_gswip.c | 185 +++++++++++++++++++++++++++++++++++------ 1 file changed, 159 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c index 809dfa3be6bb..126d4ea868ba 100644 --- a/drivers/net/dsa/lantiq_gswip.c +++ b/drivers/net/dsa/lantiq_gswip.c @@ -190,6 +190,23 @@ #define GSWIP_PCE_DEFPVID(p) (0x486 + ((p) * 0xA)) #define GSWIP_MAC_FLEN 0x8C5 +#define GSWIP_MAC_CTRL_0p(p) (0x903 + ((p) * 0xC)) +#define GSWIP_MAC_CTRL_0_PADEN BIT(8) +#define GSWIP_MAC_CTRL_0_FCS_EN BIT(7) +#define GSWIP_MAC_CTRL_0_FCON_MASK 0x0070 +#define GSWIP_MAC_CTRL_0_FCON_AUTO 0x0000 +#define GSWIP_MAC_CTRL_0_FCON_RX 0x0010 +#define GSWIP_MAC_CTRL_0_FCON_TX 0x0020 +#define GSWIP_MAC_CTRL_0_FCON_RXTX 0x0030 +#define GSWIP_MAC_CTRL_0_FCON_NONE 0x0040 +#define GSWIP_MAC_CTRL_0_FDUP_MASK 0x000C +#define GSWIP_MAC_CTRL_0_FDUP_AUTO 0x0000 +#define GSWIP_MAC_CTRL_0_FDUP_EN 0x0004 +#define GSWIP_MAC_CTRL_0_FDUP_DIS 0x000C +#define GSWIP_MAC_CTRL_0_GMII_MASK 0x0003 +#define GSWIP_MAC_CTRL_0_GMII_AUTO 0x0000 +#define GSWIP_MAC_CTRL_0_GMII_MII 0x0001 +#define GSWIP_MAC_CTRL_0_GMII_RGMII 0x0002 #define GSWIP_MAC_CTRL_2p(p) (0x905 + ((p) * 0xC)) #define GSWIP_MAC_CTRL_2_MLEN BIT(3) /* Maximum Untagged Frame Lnegth */ @@ -653,16 +670,13 @@ static int gswip_port_enable(struct dsa_switch *ds, int port, GSWIP_SDMA_PCTRLp(port)); if (!dsa_is_cpu_port(ds, port)) { - u32 macconf = GSWIP_MDIO_PHY_LINK_AUTO | - GSWIP_MDIO_PHY_SPEED_AUTO | - GSWIP_MDIO_PHY_FDUP_AUTO | - GSWIP_MDIO_PHY_FCONTX_AUTO | - GSWIP_MDIO_PHY_FCONRX_AUTO | - (phydev->mdio.addr & GSWIP_MDIO_PHY_ADDR_MASK); - - gswip_mdio_w(priv, macconf, GSWIP_MDIO_PHYp(port)); - /* Activate MDIO auto polling */ - gswip_mdio_mask(priv, 0, BIT(port), GSWIP_MDIO_MDC_CFG0); + u32 mdio_phy = 0; + + if (phydev) + mdio_phy = phydev->mdio.addr & GSWIP_MDIO_PHY_ADDR_MASK; + + gswip_mdio_mask(priv, GSWIP_MDIO_PHY_ADDR_MASK, mdio_phy, + GSWIP_MDIO_PHYp(port)); } return 0; @@ -675,14 +689,6 @@ static void gswip_port_disable(struct dsa_switch *ds, int port) if (!dsa_is_user_port(ds, port)) return; - if (!dsa_is_cpu_port(ds, port)) { - gswip_mdio_mask(priv, GSWIP_MDIO_PHY_LINK_DOWN, - GSWIP_MDIO_PHY_LINK_MASK, - GSWIP_MDIO_PHYp(port)); - /* Deactivate MDIO auto polling */ - gswip_mdio_mask(priv, BIT(port), 0, GSWIP_MDIO_MDC_CFG0); - } - gswip_switch_mask(priv, GSWIP_FDMA_PCTRL_EN, 0, GSWIP_FDMA_PCTRLp(port)); gswip_switch_mask(priv, GSWIP_SDMA_PCTRL_EN, 0, @@ -794,20 +800,31 @@ static int gswip_setup(struct dsa_switch *ds) gswip_switch_w(priv, BIT(cpu_port), GSWIP_PCE_PMAP2); gswip_switch_w(priv, BIT(cpu_port), GSWIP_PCE_PMAP3); - /* disable PHY auto polling */ + /* Deactivate MDIO PHY auto polling. Some PHYs as the AR8030 have an + * interoperability problem with this auto polling mechanism because + * their status registers think that the link is in a different state + * than it actually is. For the AR8030 it has the BMSR_ESTATEN bit set + * as well as ESTATUS_1000_TFULL and ESTATUS_1000_XFULL. This makes the + * auto polling state machine consider the link being negotiated with + * 1Gbit/s. Since the PHY itself is a Fast Ethernet RMII PHY this leads + * to the switch port being completely dead (RX and TX are both not + * working). + * Also with various other PHY / port combinations (PHY11G GPHY, PHY22F + * GPHY, external RGMII PEF7071/7072) any traffic would stop. Sometimes + * it would work fine for a few minutes to hours and then stop, on + * other device it would no traffic could be sent or received at all. + * Testing shows that when PHY auto polling is disabled these problems + * go away. + */ gswip_mdio_w(priv, 0x0, GSWIP_MDIO_MDC_CFG0); + /* Configure the MDIO Clock 2.5 MHz */ gswip_mdio_mask(priv, 0xff, 0x09, GSWIP_MDIO_MDC_CFG1); - for (i = 0; i < priv->hw_info->max_ports; i++) { - /* Disable the xMII link */ + /* Disable the xMII link */ + for (i = 0; i < priv->hw_info->max_ports; i++) gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_EN, 0, i); - /* Automatically select the xMII interface clock */ - gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_RATE_MASK, - GSWIP_MII_CFG_RATE_AUTO, i); - } - /* enable special tag insertion on cpu port */ gswip_switch_mask(priv, 0, GSWIP_FDMA_PCTRL_STEN, GSWIP_FDMA_PCTRLp(cpu_port)); @@ -1455,6 +1472,112 @@ unsupported: return; } +static void gswip_port_set_link(struct gswip_priv *priv, int port, bool link) +{ + u32 mdio_phy; + + if (link) + mdio_phy = GSWIP_MDIO_PHY_LINK_UP; + else + mdio_phy = GSWIP_MDIO_PHY_LINK_DOWN; + + gswip_mdio_mask(priv, GSWIP_MDIO_PHY_LINK_MASK, mdio_phy, + GSWIP_MDIO_PHYp(port)); +} + +static void gswip_port_set_speed(struct gswip_priv *priv, int port, int speed, + phy_interface_t interface) +{ + u32 mdio_phy = 0, mii_cfg = 0, mac_ctrl_0 = 0; + + switch (speed) { + case SPEED_10: + mdio_phy = GSWIP_MDIO_PHY_SPEED_M10; + + if (interface == PHY_INTERFACE_MODE_RMII) + mii_cfg = GSWIP_MII_CFG_RATE_M50; + else + mii_cfg = GSWIP_MII_CFG_RATE_M2P5; + + mac_ctrl_0 = GSWIP_MAC_CTRL_0_GMII_MII; + break; + + case SPEED_100: + mdio_phy = GSWIP_MDIO_PHY_SPEED_M100; + + if (interface == PHY_INTERFACE_MODE_RMII) + mii_cfg = GSWIP_MII_CFG_RATE_M50; + else + mii_cfg = GSWIP_MII_CFG_RATE_M25; + + mac_ctrl_0 = GSWIP_MAC_CTRL_0_GMII_MII; + break; + + case SPEED_1000: + mdio_phy = GSWIP_MDIO_PHY_SPEED_G1; + + mii_cfg = GSWIP_MII_CFG_RATE_M125; + + mac_ctrl_0 = GSWIP_MAC_CTRL_0_GMII_RGMII; + break; + } + + gswip_mdio_mask(priv, GSWIP_MDIO_PHY_SPEED_MASK, mdio_phy, + GSWIP_MDIO_PHYp(port)); + gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_RATE_MASK, mii_cfg, port); + gswip_switch_mask(priv, GSWIP_MAC_CTRL_0_GMII_MASK, mac_ctrl_0, + GSWIP_MAC_CTRL_0p(port)); +} + +static void gswip_port_set_duplex(struct gswip_priv *priv, int port, int duplex) +{ + u32 mac_ctrl_0, mdio_phy; + + if (duplex == DUPLEX_FULL) { + mac_ctrl_0 = GSWIP_MAC_CTRL_0_FDUP_EN; + mdio_phy = GSWIP_MDIO_PHY_FDUP_EN; + } else { + mac_ctrl_0 = GSWIP_MAC_CTRL_0_FDUP_DIS; + mdio_phy = GSWIP_MDIO_PHY_FDUP_DIS; + } + + gswip_switch_mask(priv, GSWIP_MAC_CTRL_0_FDUP_MASK, mac_ctrl_0, + GSWIP_MAC_CTRL_0p(port)); + gswip_mdio_mask(priv, GSWIP_MDIO_PHY_FDUP_MASK, mdio_phy, + GSWIP_MDIO_PHYp(port)); +} + +static void gswip_port_set_pause(struct gswip_priv *priv, int port, + bool tx_pause, bool rx_pause) +{ + u32 mac_ctrl_0, mdio_phy; + + if (tx_pause && rx_pause) { + mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_RXTX; + mdio_phy = GSWIP_MDIO_PHY_FCONTX_EN | + GSWIP_MDIO_PHY_FCONRX_EN; + } else if (tx_pause) { + mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_TX; + mdio_phy = GSWIP_MDIO_PHY_FCONTX_EN | + GSWIP_MDIO_PHY_FCONRX_DIS; + } else if (rx_pause) { + mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_RX; + mdio_phy = GSWIP_MDIO_PHY_FCONTX_DIS | + GSWIP_MDIO_PHY_FCONRX_EN; + } else { + mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_NONE; + mdio_phy = GSWIP_MDIO_PHY_FCONTX_DIS | + GSWIP_MDIO_PHY_FCONRX_DIS; + } + + gswip_switch_mask(priv, GSWIP_MAC_CTRL_0_FCON_MASK, + mac_ctrl_0, GSWIP_MAC_CTRL_0p(port)); + gswip_mdio_mask(priv, + GSWIP_MDIO_PHY_FCONTX_MASK | + GSWIP_MDIO_PHY_FCONRX_MASK, + mdio_phy, GSWIP_MDIO_PHYp(port)); +} + static void gswip_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode, const struct phylink_link_state *state) @@ -1511,6 +1634,9 @@ static void gswip_phylink_mac_link_down(struct dsa_switch *ds, int port, struct gswip_priv *priv = ds->priv; gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_EN, 0, port); + + if (!dsa_is_cpu_port(ds, port)) + gswip_port_set_link(priv, port, false); } static void gswip_phylink_mac_link_up(struct dsa_switch *ds, int port, @@ -1522,6 +1648,13 @@ static void gswip_phylink_mac_link_up(struct dsa_switch *ds, int port, { struct gswip_priv *priv = ds->priv; + if (!dsa_is_cpu_port(ds, port)) { + gswip_port_set_link(priv, port, true); + gswip_port_set_speed(priv, port, speed, interface); + gswip_port_set_duplex(priv, port, duplex); + gswip_port_set_pause(priv, port, tx_pause, rx_pause); + } + gswip_mii_mask_cfg(priv, 0, GSWIP_MII_CFG_EN, port); } -- cgit v1.2.3 From 4b5923249b8fa427943b50b8f35265176472be38 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Thu, 8 Apr 2021 20:38:28 +0200 Subject: net: dsa: lantiq_gswip: Configure all remaining GSWIP_MII_CFG bits There are a few more bits in the GSWIP_MII_CFG register for which we did rely on the boot-loader (or the hardware defaults) to set them up properly. For some external RMII PHYs we need to select the GSWIP_MII_CFG_RMII_CLK bit and also we should un-set it for non-RMII PHYs. The GSWIP_MII_CFG_RMII_CLK bit is ignored for other PHY connection modes. The GSWIP IP also supports in-band auto-negotiation for RGMII PHYs when the GSWIP_MII_CFG_RGMII_IBS bit is set. Clear this bit always as there's no known hardware which uses this (so it is not tested yet). Clear the xMII isolation bit when set at initialization time if it was previously set by the bootloader. Not doing so could lead to no traffic (neither RX nor TX) on a port with this bit set. While here, also add the GSWIP_MII_CFG_RESET bit. We don't need to manage it because this bit is self-clearning when set. We still add it here to get a better overview of the GSWIP_MII_CFG register. Fixes: 14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Cc: stable@vger.kernel.org Suggested-by: Hauke Mehrtens Acked-by: Hauke Mehrtens Signed-off-by: Martin Blumenstingl Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/dsa/lantiq_gswip.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c index 126d4ea868ba..bf5c62e5c0b0 100644 --- a/drivers/net/dsa/lantiq_gswip.c +++ b/drivers/net/dsa/lantiq_gswip.c @@ -93,8 +93,12 @@ /* GSWIP MII Registers */ #define GSWIP_MII_CFGp(p) (0x2 * (p)) +#define GSWIP_MII_CFG_RESET BIT(15) #define GSWIP_MII_CFG_EN BIT(14) +#define GSWIP_MII_CFG_ISOLATE BIT(13) #define GSWIP_MII_CFG_LDCLKDIS BIT(12) +#define GSWIP_MII_CFG_RGMII_IBS BIT(8) +#define GSWIP_MII_CFG_RMII_CLK BIT(7) #define GSWIP_MII_CFG_MODE_MIIP 0x0 #define GSWIP_MII_CFG_MODE_MIIM 0x1 #define GSWIP_MII_CFG_MODE_RMIIP 0x2 @@ -821,9 +825,11 @@ static int gswip_setup(struct dsa_switch *ds) /* Configure the MDIO Clock 2.5 MHz */ gswip_mdio_mask(priv, 0xff, 0x09, GSWIP_MDIO_MDC_CFG1); - /* Disable the xMII link */ + /* Disable the xMII interface and clear it's isolation bit */ for (i = 0; i < priv->hw_info->max_ports; i++) - gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_EN, 0, i); + gswip_mii_mask_cfg(priv, + GSWIP_MII_CFG_EN | GSWIP_MII_CFG_ISOLATE, + 0, i); /* enable special tag insertion on cpu port */ gswip_switch_mask(priv, 0, GSWIP_FDMA_PCTRL_STEN, @@ -1597,6 +1603,9 @@ static void gswip_phylink_mac_config(struct dsa_switch *ds, int port, break; case PHY_INTERFACE_MODE_RMII: miicfg |= GSWIP_MII_CFG_MODE_RMIIM; + + /* Configure the RMII clock as output: */ + miicfg |= GSWIP_MII_CFG_RMII_CLK; break; case PHY_INTERFACE_MODE_RGMII: case PHY_INTERFACE_MODE_RGMII_ID: @@ -1609,7 +1618,11 @@ static void gswip_phylink_mac_config(struct dsa_switch *ds, int port, "Unsupported interface: %d\n", state->interface); return; } - gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_MODE_MASK, miicfg, port); + + gswip_mii_mask_cfg(priv, + GSWIP_MII_CFG_MODE_MASK | GSWIP_MII_CFG_RMII_CLK | + GSWIP_MII_CFG_RGMII_IBS | GSWIP_MII_CFG_LDCLKDIS, + miicfg, port); switch (state->interface) { case PHY_INTERFACE_MODE_RGMII_ID: -- cgit v1.2.3 From 2361db89aaadfb671db6911b0063e01ec8922c28 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 9 Mar 2021 17:43:38 -0800 Subject: libnvdimm: Notify disk drivers to revalidate region read-only Previous kernels allowed the BLKROSET to override the disk's read-only status. With that situation fixed the pmem driver needs to rely on notification events to reevaluate the disk read-only status after the host region has been marked read-write. Recall that when libnvdimm determines that the persistent memory has lost persistence (for example lack of energy to flush from DRAM to FLASH on an NVDIMM-N device) it marks the region read-only, but that state can be overridden by the user via: echo 0 > /sys/bus/nd/devices/regionX/read_only ...to date there is no notification that the region has restored persistence, so the user override is the only recovery. Fixes: 52f019d43c22 ("block: add a hard-readonly flag to struct gendisk") Reported-by: kernel test robot Reported-by: Vishal Verma Tested-by: Vishal Verma Reviewed-by: Christoph Hellwig Cc: Christoph Hellwig Cc: Ming Lei Cc: Martin K. Petersen Cc: Hannes Reinecke Cc: Jens Axboe Link: https://lore.kernel.org/r/161534060720.528671.2341213328968989192.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams --- drivers/nvdimm/bus.c | 14 ++++++-------- drivers/nvdimm/pmem.c | 37 +++++++++++++++++++++++++++++++++---- drivers/nvdimm/region_devs.c | 7 +++++++ 3 files changed, 46 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/nvdimm/bus.c b/drivers/nvdimm/bus.c index 48f0985ca8a0..3a777d0073b7 100644 --- a/drivers/nvdimm/bus.c +++ b/drivers/nvdimm/bus.c @@ -631,16 +631,14 @@ void nvdimm_check_and_set_ro(struct gendisk *disk) struct nd_region *nd_region = to_nd_region(dev->parent); int disk_ro = get_disk_ro(disk); - /* - * Upgrade to read-only if the region is read-only preserve as - * read-only if the disk is already read-only. - */ - if (disk_ro || nd_region->ro == disk_ro) + /* catch the disk up with the region ro state */ + if (disk_ro == nd_region->ro) return; - dev_info(dev, "%s read-only, marking %s read-only\n", - dev_name(&nd_region->dev), disk->disk_name); - set_disk_ro(disk, 1); + dev_info(dev, "%s read-%s, marking %s read-%s\n", + dev_name(&nd_region->dev), nd_region->ro ? "only" : "write", + disk->disk_name, nd_region->ro ? "only" : "write"); + set_disk_ro(disk, nd_region->ro); } EXPORT_SYMBOL(nvdimm_check_and_set_ro); diff --git a/drivers/nvdimm/pmem.c b/drivers/nvdimm/pmem.c index b8a85bfb2e95..7daac795db39 100644 --- a/drivers/nvdimm/pmem.c +++ b/drivers/nvdimm/pmem.c @@ -26,6 +26,7 @@ #include #include #include "pmem.h" +#include "btt.h" #include "pfn.h" #include "nd.h" @@ -585,7 +586,7 @@ static void nd_pmem_shutdown(struct device *dev) nvdimm_flush(to_nd_region(dev->parent), NULL); } -static void nd_pmem_notify(struct device *dev, enum nvdimm_event event) +static void pmem_revalidate_poison(struct device *dev) { struct nd_region *nd_region; resource_size_t offset = 0, end_trunc = 0; @@ -595,9 +596,6 @@ static void nd_pmem_notify(struct device *dev, enum nvdimm_event event) struct range range; struct kernfs_node *bb_state; - if (event != NVDIMM_REVALIDATE_POISON) - return; - if (is_nd_btt(dev)) { struct nd_btt *nd_btt = to_nd_btt(dev); @@ -635,6 +633,37 @@ static void nd_pmem_notify(struct device *dev, enum nvdimm_event event) sysfs_notify_dirent(bb_state); } +static void pmem_revalidate_region(struct device *dev) +{ + struct pmem_device *pmem; + + if (is_nd_btt(dev)) { + struct nd_btt *nd_btt = to_nd_btt(dev); + struct btt *btt = nd_btt->btt; + + nvdimm_check_and_set_ro(btt->btt_disk); + return; + } + + pmem = dev_get_drvdata(dev); + nvdimm_check_and_set_ro(pmem->disk); +} + +static void nd_pmem_notify(struct device *dev, enum nvdimm_event event) +{ + switch (event) { + case NVDIMM_REVALIDATE_POISON: + pmem_revalidate_poison(dev); + break; + case NVDIMM_REVALIDATE_REGION: + pmem_revalidate_region(dev); + break; + default: + dev_WARN_ONCE(dev, 1, "notify: unknown event: %d\n", event); + break; + } +} + MODULE_ALIAS("pmem"); MODULE_ALIAS_ND_DEVICE(ND_DEVICE_NAMESPACE_IO); MODULE_ALIAS_ND_DEVICE(ND_DEVICE_NAMESPACE_PMEM); diff --git a/drivers/nvdimm/region_devs.c b/drivers/nvdimm/region_devs.c index ef23119db574..51870eb51da6 100644 --- a/drivers/nvdimm/region_devs.c +++ b/drivers/nvdimm/region_devs.c @@ -518,6 +518,12 @@ static ssize_t read_only_show(struct device *dev, return sprintf(buf, "%d\n", nd_region->ro); } +static int revalidate_read_only(struct device *dev, void *data) +{ + nd_device_notify(dev, NVDIMM_REVALIDATE_REGION); + return 0; +} + static ssize_t read_only_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t len) { @@ -529,6 +535,7 @@ static ssize_t read_only_store(struct device *dev, return rc; nd_region->ro = ro; + device_for_each_child(dev, NULL, revalidate_read_only); return len; } static DEVICE_ATTR_RW(read_only); -- cgit v1.2.3 From 895915226a598394fe9bf57fe97612bdfcb2fb86 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 9 Apr 2021 15:58:50 +0200 Subject: Bluetooth: btusb: Revert Fix the autosuspend enable and disable drivers/usb/core/hub.c: usb_new_device() contains the following: /* By default, forbid autosuspend for all devices. It will be * allowed for hubs during binding. */ usb_disable_autosuspend(udev); So for anything which is not a hub, such as btusb devices, autosuspend is disabled by default and we must call usb_enable_autosuspend(udev) to enable it. This means that the "Fix the autosuspend enable and disable" commit, which drops the usb_enable_autosuspend() call when the enable_autosuspend module option is true, is completely wrong, revert it. This reverts commit 7bd9fb058d77213130e4b3e594115c028b708e7e. Cc: Hui Wang Fixes: 7bd9fb058d77 ("Bluetooth: btusb: Fix the autosuspend enable and disable") Acked-by: Hui Wang Acked-by: Marcel Holtmann Signed-off-by: Hans de Goede Signed-off-by: Linus Torvalds --- drivers/bluetooth/btusb.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 52683fd22e05..5cbfbd948f67 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -4849,8 +4849,8 @@ static int btusb_probe(struct usb_interface *intf, data->diag = NULL; } - if (!enable_autosuspend) - usb_disable_autosuspend(data->udev); + if (enable_autosuspend) + usb_enable_autosuspend(data->udev); err = hci_register_dev(hdev); if (err < 0) @@ -4910,9 +4910,6 @@ static void btusb_disconnect(struct usb_interface *intf) gpiod_put(data->reset_gpio); hci_free_dev(hdev); - - if (!enable_autosuspend) - usb_enable_autosuspend(data->udev); } #ifdef CONFIG_PM -- cgit v1.2.3 From d084d996aaf53c0cc583dc75a4fc2a67fe485846 Mon Sep 17 00:00:00 2001 From: Si-Wei Liu Date: Thu, 8 Apr 2021 12:10:43 +0300 Subject: vdpa/mlx5: should exclude header length and fcs from mtu When feature VIRTIO_NET_F_MTU is negotiated on mlx5_vdpa, 22 extra bytes worth of MTU length is shown in guest. This is because the mlx5_query_port_max_mtu API returns the "hardware" MTU value, which does not just contain the Ethernet payload, but includes extra lengths starting from the Ethernet header up to the FCS altogether. Fix the MTU so packets won't get dropped silently. Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") Signed-off-by: Si-Wei Liu Acked-by: Jason Wang Acked-by: Eli Cohen Link: https://lore.kernel.org/r/20210408091047.4269-2-elic@nvidia.com Signed-off-by: Michael S. Tsirkin --- drivers/vdpa/mlx5/core/mlx5_vdpa.h | 4 ++++ drivers/vdpa/mlx5/net/mlx5_vnet.c | 15 ++++++++++++++- 2 files changed, 18 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/vdpa/mlx5/core/mlx5_vdpa.h b/drivers/vdpa/mlx5/core/mlx5_vdpa.h index 08f742fd2409..b6cc53ba980c 100644 --- a/drivers/vdpa/mlx5/core/mlx5_vdpa.h +++ b/drivers/vdpa/mlx5/core/mlx5_vdpa.h @@ -4,9 +4,13 @@ #ifndef __MLX5_VDPA_H__ #define __MLX5_VDPA_H__ +#include +#include #include #include +#define MLX5V_ETH_HARD_MTU (ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN) + struct mlx5_vdpa_direct_mr { u64 start; u64 end; diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c index 71397fdafa6a..a49ebb250253 100644 --- a/drivers/vdpa/mlx5/net/mlx5_vnet.c +++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c @@ -1907,6 +1907,19 @@ static const struct vdpa_config_ops mlx5_vdpa_ops = { .free = mlx5_vdpa_free, }; +static int query_mtu(struct mlx5_core_dev *mdev, u16 *mtu) +{ + u16 hw_mtu; + int err; + + err = mlx5_query_nic_vport_mtu(mdev, &hw_mtu); + if (err) + return err; + + *mtu = hw_mtu - MLX5V_ETH_HARD_MTU; + return 0; +} + static int alloc_resources(struct mlx5_vdpa_net *ndev) { struct mlx5_vdpa_net_resources *res = &ndev->res; @@ -1992,7 +2005,7 @@ static int mlx5v_probe(struct auxiliary_device *adev, init_mvqs(ndev); mutex_init(&ndev->reslock); config = &ndev->config; - err = mlx5_query_nic_vport_mtu(mdev, &ndev->mtu); + err = query_mtu(mdev, &ndev->mtu); if (err) goto err_mtu; -- cgit v1.2.3 From d13a15d544ce51c0d83744ccb638c954e645feea Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Thu, 8 Apr 2021 12:10:44 +0300 Subject: vdpa/mlx5: Use the correct dma device when registering memory In cases where the vdpa instance uses a SF (sub function), the DMA device is the parent device. Use a function to retrieve the correct DMA device. Fixes: 1958fc2f0712 ("net/mlx5: SF, Add auxiliary device driver") Signed-off-by: Eli Cohen Reviewed-by: Parav Pandit Link: https://lore.kernel.org/r/20210408091047.4269-3-elic@nvidia.com Signed-off-by: Michael S. Tsirkin Acked-by: Jason Wang --- drivers/vdpa/mlx5/core/mr.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/vdpa/mlx5/core/mr.c b/drivers/vdpa/mlx5/core/mr.c index d300f799efcd..3908ff28eec0 100644 --- a/drivers/vdpa/mlx5/core/mr.c +++ b/drivers/vdpa/mlx5/core/mr.c @@ -219,6 +219,11 @@ static void destroy_indirect_key(struct mlx5_vdpa_dev *mvdev, struct mlx5_vdpa_m mlx5_vdpa_destroy_mkey(mvdev, &mkey->mkey); } +static struct device *get_dma_device(struct mlx5_vdpa_dev *mvdev) +{ + return &mvdev->mdev->pdev->dev; +} + static int map_direct_mr(struct mlx5_vdpa_dev *mvdev, struct mlx5_vdpa_direct_mr *mr, struct vhost_iotlb *iotlb) { @@ -234,7 +239,7 @@ static int map_direct_mr(struct mlx5_vdpa_dev *mvdev, struct mlx5_vdpa_direct_mr u64 pa; u64 paend; struct scatterlist *sg; - struct device *dma = mvdev->mdev->device; + struct device *dma = get_dma_device(mvdev); for (map = vhost_iotlb_itree_first(iotlb, mr->start, mr->end - 1); map; map = vhost_iotlb_itree_next(map, start, mr->end - 1)) { @@ -291,7 +296,7 @@ err_map: static void unmap_direct_mr(struct mlx5_vdpa_dev *mvdev, struct mlx5_vdpa_direct_mr *mr) { - struct device *dma = mvdev->mdev->device; + struct device *dma = get_dma_device(mvdev); destroy_direct_mr(mvdev, mr); dma_unmap_sg_attrs(dma, mr->sg_head.sgl, mr->nsg, DMA_BIDIRECTIONAL, 0); -- cgit v1.2.3 From b2ae0a2db8a2d42a643590c4935faf61fedf553b Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Thu, 8 Apr 2021 12:10:45 +0300 Subject: vdpa/mlx5: Retrieve BAR address suitable any function struct mlx5_core_dev has a bar_addr field that contains the correct bar address for the function regardless of whether it is pci function or sub function. Use it. Fixes: 1958fc2f0712 ("net/mlx5: SF, Add auxiliary device driver") Signed-off-by: Eli Cohen Reviewed-by: Parav Pandit Link: https://lore.kernel.org/r/20210408091047.4269-4-elic@nvidia.com Signed-off-by: Michael S. Tsirkin Acked-by: Jason Wang --- drivers/vdpa/mlx5/core/resources.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/vdpa/mlx5/core/resources.c b/drivers/vdpa/mlx5/core/resources.c index 96e6421c5d1c..6521cbd0f5c2 100644 --- a/drivers/vdpa/mlx5/core/resources.c +++ b/drivers/vdpa/mlx5/core/resources.c @@ -246,7 +246,8 @@ int mlx5_vdpa_alloc_resources(struct mlx5_vdpa_dev *mvdev) if (err) goto err_key; - kick_addr = pci_resource_start(mdev->pdev, 0) + offset; + kick_addr = mdev->bar_addr + offset; + res->kick_addr = ioremap(kick_addr, PAGE_SIZE); if (!res->kick_addr) { err = -ENOMEM; -- cgit v1.2.3 From 4b454a82418dd76d8c0590bb3f7a99a63ea57dc5 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Thu, 8 Apr 2021 12:10:46 +0300 Subject: vdpa/mlx5: Fix wrong use of bit numbers VIRTIO_F_VERSION_1 is a bit number. Use BIT_ULL() with mask conditionals. Also, in mlx5_vdpa_is_little_endian() use BIT_ULL for consistency with the rest of the code. Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") Signed-off-by: Eli Cohen Link: https://lore.kernel.org/r/20210408091047.4269-5-elic@nvidia.com Signed-off-by: Michael S. Tsirkin Acked-by: Jason Wang --- drivers/vdpa/mlx5/net/mlx5_vnet.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c index a49ebb250253..6fe61fc57790 100644 --- a/drivers/vdpa/mlx5/net/mlx5_vnet.c +++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c @@ -820,7 +820,7 @@ static int create_virtqueue(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtque MLX5_SET(virtio_q, vq_ctx, event_qpn_or_msix, mvq->fwqp.mqp.qpn); MLX5_SET(virtio_q, vq_ctx, queue_size, mvq->num_ent); MLX5_SET(virtio_q, vq_ctx, virtio_version_1_0, - !!(ndev->mvdev.actual_features & VIRTIO_F_VERSION_1)); + !!(ndev->mvdev.actual_features & BIT_ULL(VIRTIO_F_VERSION_1))); MLX5_SET64(virtio_q, vq_ctx, desc_addr, mvq->desc_addr); MLX5_SET64(virtio_q, vq_ctx, used_addr, mvq->device_addr); MLX5_SET64(virtio_q, vq_ctx, available_addr, mvq->driver_addr); @@ -1554,7 +1554,7 @@ static void clear_virtqueues(struct mlx5_vdpa_net *ndev) static inline bool mlx5_vdpa_is_little_endian(struct mlx5_vdpa_dev *mvdev) { return virtio_legacy_is_little_endian() || - (mvdev->actual_features & (1ULL << VIRTIO_F_VERSION_1)); + (mvdev->actual_features & BIT_ULL(VIRTIO_F_VERSION_1)); } static __virtio16 cpu_to_mlx5vdpa16(struct mlx5_vdpa_dev *mvdev, u16 val) -- cgit v1.2.3 From bc04d93ea30a0a8eb2a2648b848cef35d1f6f798 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Thu, 8 Apr 2021 12:10:47 +0300 Subject: vdpa/mlx5: Fix suspend/resume index restoration When we suspend the VM, the VDPA interface will be reset. When the VM is resumed again, clear_virtqueues() will clear the available and used indices resulting in hardware virqtqueue objects becoming out of sync. We can avoid this function alltogether since qemu will clear them if required, e.g. when the VM went through a reboot. Moreover, since the hw available and used indices should always be identical on query and should be restored to the same value same value for virtqueues that complete in order, we set the single value provided by set_vq_state(). In get_vq_state() we return the value of hardware used index. Fixes: b35ccebe3ef7 ("vdpa/mlx5: Restore the hardware used index after change map") Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") Signed-off-by: Eli Cohen Link: https://lore.kernel.org/r/20210408091047.4269-6-elic@nvidia.com Signed-off-by: Michael S. Tsirkin Acked-by: Jason Wang --- drivers/vdpa/mlx5/net/mlx5_vnet.c | 21 ++++++++------------- 1 file changed, 8 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c index 6fe61fc57790..4d2809c7d4e3 100644 --- a/drivers/vdpa/mlx5/net/mlx5_vnet.c +++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c @@ -1169,6 +1169,7 @@ static void suspend_vq(struct mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqueue *m return; } mvq->avail_idx = attr.available_index; + mvq->used_idx = attr.used_index; } static void suspend_vqs(struct mlx5_vdpa_net *ndev) @@ -1426,6 +1427,7 @@ static int mlx5_vdpa_set_vq_state(struct vdpa_device *vdev, u16 idx, return -EINVAL; } + mvq->used_idx = state->avail_index; mvq->avail_idx = state->avail_index; return 0; } @@ -1443,7 +1445,11 @@ static int mlx5_vdpa_get_vq_state(struct vdpa_device *vdev, u16 idx, struct vdpa * that cares about emulating the index after vq is stopped. */ if (!mvq->initialized) { - state->avail_index = mvq->avail_idx; + /* Firmware returns a wrong value for the available index. + * Since both values should be identical, we take the value of + * used_idx which is reported correctly. + */ + state->avail_index = mvq->used_idx; return 0; } @@ -1452,7 +1458,7 @@ static int mlx5_vdpa_get_vq_state(struct vdpa_device *vdev, u16 idx, struct vdpa mlx5_vdpa_warn(mvdev, "failed to query virtqueue\n"); return err; } - state->avail_index = attr.available_index; + state->avail_index = attr.used_index; return 0; } @@ -1540,16 +1546,6 @@ static void teardown_virtqueues(struct mlx5_vdpa_net *ndev) } } -static void clear_virtqueues(struct mlx5_vdpa_net *ndev) -{ - int i; - - for (i = ndev->mvdev.max_vqs - 1; i >= 0; i--) { - ndev->vqs[i].avail_idx = 0; - ndev->vqs[i].used_idx = 0; - } -} - /* TODO: cross-endian support */ static inline bool mlx5_vdpa_is_little_endian(struct mlx5_vdpa_dev *mvdev) { @@ -1785,7 +1781,6 @@ static void mlx5_vdpa_set_status(struct vdpa_device *vdev, u8 status) if (!status) { mlx5_vdpa_info(mvdev, "performing device reset\n"); teardown_driver(ndev); - clear_virtqueues(ndev); mlx5_vdpa_destroy_mr(&ndev->mvdev); ndev->mvdev.status = 0; ndev->mvdev.mlx_features = 0; -- cgit v1.2.3 From d473d32c2fbac2d1d7082c61899cfebd34eb267a Mon Sep 17 00:00:00 2001 From: Ilya Lipnitskiy Date: Mon, 5 Apr 2021 15:25:40 -0700 Subject: of: property: fw_devlink: do not link ".*,nr-gpios" [,]nr-gpios property is used by some GPIO drivers[0] to indicate the number of GPIOs present on a system, not define a GPIO. nr-gpios is not configured by #gpio-cells and can't be parsed along with other "*-gpios" properties. nr-gpios without the "," prefix is not allowed by the DT spec[1], so only add exception for the ",nr-gpios" suffix and let the error message continue being printed for non-compliant implementations. [0] nr-gpios is referenced in Documentation/devicetree/bindings/gpio: - gpio-adnp.txt - gpio-xgene-sb.txt - gpio-xlp.txt - snps,dw-apb-gpio.yaml [1] Link: https://github.com/devicetree-org/dt-schema/blob/cb53a16a1eb3e2169ce170c071e47940845ec26e/schemas/gpio/gpio-consumer.yaml#L20 Fixes errors such as: OF: /palmbus@300000/gpio@600: could not find phandle Fixes: 7f00be96f125 ("of: property: Add device link support for interrupt-parent, dmas and -gpio(s)") Signed-off-by: Ilya Lipnitskiy Cc: Saravana Kannan Cc: stable@vger.kernel.org # v5.5+ Link: https://lore.kernel.org/r/20210405222540.18145-1-ilya.lipnitskiy@gmail.com Signed-off-by: Rob Herring --- drivers/of/property.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/of/property.c b/drivers/of/property.c index 5f9eed79a8aa..6d8368bf88ca 100644 --- a/drivers/of/property.c +++ b/drivers/of/property.c @@ -1260,7 +1260,16 @@ DEFINE_SIMPLE_PROP(pinctrl7, "pinctrl-7", NULL) DEFINE_SIMPLE_PROP(pinctrl8, "pinctrl-8", NULL) DEFINE_SUFFIX_PROP(regulators, "-supply", NULL) DEFINE_SUFFIX_PROP(gpio, "-gpio", "#gpio-cells") -DEFINE_SUFFIX_PROP(gpios, "-gpios", "#gpio-cells") + +static struct device_node *parse_gpios(struct device_node *np, + const char *prop_name, int index) +{ + if (!strcmp_suffix(prop_name, ",nr-gpios")) + return NULL; + + return parse_suffix_prop_cells(np, prop_name, index, "-gpios", + "#gpio-cells"); +} static struct device_node *parse_iommu_maps(struct device_node *np, const char *prop_name, int index) -- cgit v1.2.3 From 3bc41d6d2721d5168a8f7fea34028a5332068f5e Mon Sep 17 00:00:00 2001 From: Sven Van Asbroeck Date: Thu, 8 Apr 2021 20:39:04 -0400 Subject: lan743x: fix ethernet frame cutoff issue The ethernet frame length is calculated incorrectly. Depending on the value of RX_HEAD_PADDING, this may result in ethernet frames that are too short (cut off at the end), or too long (garbage added to the end). Fix by calculating the ethernet frame length correctly. For added clarity, use the ETH_FCS_LEN constant in the calculation. Many thanks to Heiner Kallweit for suggesting this solution. Suggested-by: Heiner Kallweit Fixes: 3e21a10fdea3 ("lan743x: trim all 4 bytes of the FCS; not just 2") Link: https://lore.kernel.org/lkml/20210408172353.21143-1-TheSven73@gmail.com/ Signed-off-by: Sven Van Asbroeck Reviewed-by: George McCollister Tested-by: George McCollister Link: https://lore.kernel.org/r/20210409003904.8957-1-TheSven73@gmail.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/microchip/lan743x_main.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/microchip/lan743x_main.c b/drivers/net/ethernet/microchip/lan743x_main.c index 1c3e204d727c..7b6794aa8ea9 100644 --- a/drivers/net/ethernet/microchip/lan743x_main.c +++ b/drivers/net/ethernet/microchip/lan743x_main.c @@ -885,8 +885,8 @@ static int lan743x_mac_set_mtu(struct lan743x_adapter *adapter, int new_mtu) } mac_rx &= ~(MAC_RX_MAX_SIZE_MASK_); - mac_rx |= (((new_mtu + ETH_HLEN + 4) << MAC_RX_MAX_SIZE_SHIFT_) & - MAC_RX_MAX_SIZE_MASK_); + mac_rx |= (((new_mtu + ETH_HLEN + ETH_FCS_LEN) + << MAC_RX_MAX_SIZE_SHIFT_) & MAC_RX_MAX_SIZE_MASK_); lan743x_csr_write(adapter, MAC_RX, mac_rx); if (enabled) { @@ -1944,7 +1944,7 @@ static int lan743x_rx_init_ring_element(struct lan743x_rx *rx, int index) struct sk_buff *skb; dma_addr_t dma_ptr; - buffer_length = netdev->mtu + ETH_HLEN + 4 + RX_HEAD_PADDING; + buffer_length = netdev->mtu + ETH_HLEN + ETH_FCS_LEN + RX_HEAD_PADDING; descriptor = &rx->ring_cpu_ptr[index]; buffer_info = &rx->buffer_info[index]; @@ -2040,7 +2040,7 @@ lan743x_rx_trim_skb(struct sk_buff *skb, int frame_length) dev_kfree_skb_irq(skb); return NULL; } - frame_length = max_t(int, 0, frame_length - RX_HEAD_PADDING - 4); + frame_length = max_t(int, 0, frame_length - ETH_FCS_LEN); if (skb->len > frame_length) { skb->tail -= skb->len - frame_length; skb->len = frame_length; -- cgit v1.2.3 From cd7e963d2f0875789ddb5c3746b628716bd0a8c9 Mon Sep 17 00:00:00 2001 From: Salil Mehta Date: Fri, 9 Apr 2021 08:42:23 +0100 Subject: net: hns3: Trivial spell fix in hns3 driver Some trivial spelling mistakes which caught my eye during the review of the code. Signed-off-by: Salil Mehta Link: https://lore.kernel.org/r/20210409074223.32480-1-salil.mehta@huawei.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 2 +- drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index 2dd2af269b46..b0dbe6dcaa7b 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -11210,7 +11210,7 @@ static int hclge_set_channels(struct hnae3_handle *handle, u32 new_tqps_num, if (ret) return ret; - /* RSS indirection table has been configuared by user */ + /* RSS indirection table has been configured by user */ if (rxfh_configured) goto out; diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c index 14b83eca0a5e..e295d359e912 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c @@ -2193,7 +2193,7 @@ static void hclgevf_reset_service_task(struct hclgevf_dev *hdev) if (test_and_clear_bit(HCLGEVF_RESET_PENDING, &hdev->reset_state)) { - /* PF has initmated that it is about to reset the hardware. + /* PF has intimated that it is about to reset the hardware. * We now have to poll & check if hardware has actually * completed the reset sequence. On hardware reset completion, * VF needs to reset the client and ae device. @@ -3497,7 +3497,7 @@ static int hclgevf_set_channels(struct hnae3_handle *handle, u32 new_tqps_num, if (ret) return ret; - /* RSS indirection table has been configuared by user */ + /* RSS indirection table has been configured by user */ if (rxfh_configured) goto out; -- cgit v1.2.3 From b37c38484375f5a204500e0b10b40da268090995 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marek=20Beh=C3=BAn?= Date: Fri, 9 Apr 2021 13:27:04 -0700 Subject: treewide: change my e-mail address, fix my name MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Change my e-mail address to kabel@kernel.org, and fix my name in non-code parts (add diacritical mark). Link: https://lkml.kernel.org/r/20210325171123.28093-2-kabel@kernel.org Signed-off-by: Marek Behún Cc: Bartosz Golaszewski Cc: Greg Kroah-Hartman Cc: Jassi Brar Cc: Linus Walleij Cc: Pavel Machek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/bus/moxtet.c | 4 ++-- drivers/firmware/turris-mox-rwtm.c | 4 ++-- drivers/gpio/gpio-moxtet.c | 4 ++-- drivers/leds/leds-turris-omnia.c | 4 ++-- drivers/mailbox/armada-37xx-rwtm-mailbox.c | 4 ++-- drivers/watchdog/armada_37xx_wdt.c | 4 ++-- 6 files changed, 12 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/bus/moxtet.c b/drivers/bus/moxtet.c index b20fdcbd035b..fd87a59837fa 100644 --- a/drivers/bus/moxtet.c +++ b/drivers/bus/moxtet.c @@ -2,7 +2,7 @@ /* * Turris Mox module configuration bus driver * - * Copyright (C) 2019 Marek Behun + * Copyright (C) 2019 Marek Behún */ #include @@ -879,6 +879,6 @@ static void __exit moxtet_exit(void) } module_exit(moxtet_exit); -MODULE_AUTHOR("Marek Behun "); +MODULE_AUTHOR("Marek Behun "); MODULE_DESCRIPTION("CZ.NIC's Turris Mox module configuration bus"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/firmware/turris-mox-rwtm.c b/drivers/firmware/turris-mox-rwtm.c index 50bb2a6d6ccf..62f0d1a5dd32 100644 --- a/drivers/firmware/turris-mox-rwtm.c +++ b/drivers/firmware/turris-mox-rwtm.c @@ -2,7 +2,7 @@ /* * Turris Mox rWTM firmware driver * - * Copyright (C) 2019 Marek Behun + * Copyright (C) 2019 Marek Behún */ #include @@ -547,4 +547,4 @@ module_platform_driver(turris_mox_rwtm_driver); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("Turris Mox rWTM firmware driver"); -MODULE_AUTHOR("Marek Behun "); +MODULE_AUTHOR("Marek Behun "); diff --git a/drivers/gpio/gpio-moxtet.c b/drivers/gpio/gpio-moxtet.c index 8299909318f4..61f9efd6c64f 100644 --- a/drivers/gpio/gpio-moxtet.c +++ b/drivers/gpio/gpio-moxtet.c @@ -2,7 +2,7 @@ /* * Turris Mox Moxtet GPIO expander * - * Copyright (C) 2018 Marek Behun + * Copyright (C) 2018 Marek Behún */ #include @@ -174,6 +174,6 @@ static struct moxtet_driver moxtet_gpio_driver = { }; module_moxtet_driver(moxtet_gpio_driver); -MODULE_AUTHOR("Marek Behun "); +MODULE_AUTHOR("Marek Behun "); MODULE_DESCRIPTION("Turris Mox Moxtet GPIO expander"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/leds/leds-turris-omnia.c b/drivers/leds/leds-turris-omnia.c index 7b2f4d0ae3fe..2f9a289ab245 100644 --- a/drivers/leds/leds-turris-omnia.c +++ b/drivers/leds/leds-turris-omnia.c @@ -2,7 +2,7 @@ /* * CZ.NIC's Turris Omnia LEDs driver * - * 2020 by Marek Behun + * 2020 by Marek Behún */ #include @@ -287,6 +287,6 @@ static struct i2c_driver omnia_leds_driver = { module_i2c_driver(omnia_leds_driver); -MODULE_AUTHOR("Marek Behun "); +MODULE_AUTHOR("Marek Behun "); MODULE_DESCRIPTION("CZ.NIC's Turris Omnia LEDs"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/mailbox/armada-37xx-rwtm-mailbox.c b/drivers/mailbox/armada-37xx-rwtm-mailbox.c index 9f2ce7f03c67..456a117a65fd 100644 --- a/drivers/mailbox/armada-37xx-rwtm-mailbox.c +++ b/drivers/mailbox/armada-37xx-rwtm-mailbox.c @@ -2,7 +2,7 @@ /* * rWTM BIU Mailbox driver for Armada 37xx * - * Author: Marek Behun + * Author: Marek Behún */ #include @@ -203,4 +203,4 @@ module_platform_driver(armada_37xx_mbox_driver); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("rWTM BIU Mailbox driver for Armada 37xx"); -MODULE_AUTHOR("Marek Behun "); +MODULE_AUTHOR("Marek Behun "); diff --git a/drivers/watchdog/armada_37xx_wdt.c b/drivers/watchdog/armada_37xx_wdt.c index e5dcb26d85f0..1635f421ef2c 100644 --- a/drivers/watchdog/armada_37xx_wdt.c +++ b/drivers/watchdog/armada_37xx_wdt.c @@ -2,7 +2,7 @@ /* * Watchdog driver for Marvell Armada 37xx SoCs * - * Author: Marek Behun + * Author: Marek Behún */ #include @@ -366,7 +366,7 @@ static struct platform_driver armada_37xx_wdt_driver = { module_platform_driver(armada_37xx_wdt_driver); -MODULE_AUTHOR("Marek Behun "); +MODULE_AUTHOR("Marek Behun "); MODULE_DESCRIPTION("Armada 37xx CPU Watchdog"); MODULE_LICENSE("GPL v2"); -- cgit v1.2.3 From a2948b17f6b936fc52f86c0f92c46d2f91928b79 Mon Sep 17 00:00:00 2001 From: Vaibhav Jain Date: Fri, 2 Apr 2021 14:55:55 +0530 Subject: libnvdimm/region: Fix nvdimm_has_flush() to handle ND_REGION_ASYNC In case a platform doesn't provide explicit flush-hints but provides an explicit flush callback via ND_REGION_ASYNC region flag, then nvdimm_has_flush() still returns '0' indicating that writes do not require flushing. This happens on PPC64 with patch at [1] applied, where 'deep_flush' of a region was denied even though an explicit flush function was provided. Fix this by adding a condition to nvdimm_has_flush() to test for the ND_REGION_ASYNC flag on the region and see if a 'region->flush' callback is assigned. Link: http://lore.kernel.org/r/161703936121.36.7260632399582101498.stgit@e1fbed493c87 [1] Fixes: c5d4355d10d4 ("libnvdimm: nd_region flush callback support") Reported-by: Shivaprasad G Bhat Signed-off-by: Vaibhav Jain Link: https://lore.kernel.org/r/20210402092555.208590-1-vaibhav@linux.ibm.com Signed-off-by: Dan Williams --- drivers/nvdimm/region_devs.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/nvdimm/region_devs.c b/drivers/nvdimm/region_devs.c index 51870eb51da6..9ccf3d608799 100644 --- a/drivers/nvdimm/region_devs.c +++ b/drivers/nvdimm/region_devs.c @@ -1246,6 +1246,11 @@ int nvdimm_has_flush(struct nd_region *nd_region) || !IS_ENABLED(CONFIG_ARCH_HAS_PMEM_API)) return -ENXIO; + /* Test if an explicit flush function is defined */ + if (test_bit(ND_REGION_ASYNC, &nd_region->flags) && nd_region->flush) + return 1; + + /* Test if any flush hints for the region are available */ for (i = 0; i < nd_region->ndr_mappings; i++) { struct nd_mapping *nd_mapping = &nd_region->mapping[i]; struct nvdimm *nvdimm = nd_mapping->nvdimm; @@ -1256,8 +1261,8 @@ int nvdimm_has_flush(struct nd_region *nd_region) } /* - * The platform defines dimm devices without hints, assume - * platform persistence mechanism like ADR + * The platform defines dimm devices without hints nor explicit flush, + * assume platform persistence mechanism like ADR */ return 0; } -- cgit v1.2.3 From 31457db3750c0b0ed229d836f2609fdb8a5b790e Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Sun, 11 Apr 2021 11:02:08 +0200 Subject: net: davicom: Fix regulator not turned off on failed probe When the probe fails, we must disable the regulator that was previously enabled. This patch is a follow-up to commit ac88c531a5b3 ("net: davicom: Fix regulator not turned off on failed probe") which missed one case. Fixes: 7994fe55a4a2 ("dm9000: Add regulator and reset support to dm9000") Signed-off-by: Christophe JAILLET Signed-off-by: David S. Miller --- drivers/net/ethernet/davicom/dm9000.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c index 252adfa5d837..8a9096aa85cd 100644 --- a/drivers/net/ethernet/davicom/dm9000.c +++ b/drivers/net/ethernet/davicom/dm9000.c @@ -1471,8 +1471,10 @@ dm9000_probe(struct platform_device *pdev) /* Init network device */ ndev = alloc_etherdev(sizeof(struct board_info)); - if (!ndev) - return -ENOMEM; + if (!ndev) { + ret = -ENOMEM; + goto out_regulator_disable; + } SET_NETDEV_DEV(ndev, &pdev->dev); -- cgit v1.2.3 From 6628ddfec7580882f11fdc5c194a8ea781fdadfa Mon Sep 17 00:00:00 2001 From: Phillip Potter Date: Sun, 11 Apr 2021 12:28:24 +0100 Subject: net: geneve: check skb is large enough for IPv4/IPv6 header Check within geneve_xmit_skb/geneve6_xmit_skb that sk_buff structure is large enough to include IPv4 or IPv6 header, and reject if not. The geneve_xmit_skb portion and overall idea was contributed by Eric Dumazet. Fixes a KMSAN-found uninit-value bug reported by syzbot at: https://syzkaller.appspot.com/bug?id=abe95dc3e3e9667fc23b8d81f29ecad95c6f106f Suggested-by: Eric Dumazet Reported-by: syzbot+2e406a9ac75bb71d4b7a@syzkaller.appspotmail.com Signed-off-by: Phillip Potter Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/geneve.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c index d5b1e48e0c09..42f31c681846 100644 --- a/drivers/net/geneve.c +++ b/drivers/net/geneve.c @@ -891,6 +891,9 @@ static int geneve_xmit_skb(struct sk_buff *skb, struct net_device *dev, __be16 sport; int err; + if (!pskb_network_may_pull(skb, sizeof(struct iphdr))) + return -EINVAL; + sport = udp_flow_src_port(geneve->net, skb, 1, USHRT_MAX, true); rt = geneve_get_v4_rt(skb, dev, gs4, &fl4, info, geneve->cfg.info.key.tp_dst, sport); @@ -985,6 +988,9 @@ static int geneve6_xmit_skb(struct sk_buff *skb, struct net_device *dev, __be16 sport; int err; + if (!pskb_network_may_pull(skb, sizeof(struct ipv6hdr))) + return -EINVAL; + sport = udp_flow_src_port(geneve->net, skb, 1, USHRT_MAX, true); dst = geneve_get_v6_dst(skb, dev, gs6, &fl6, info, geneve->cfg.info.key.tp_dst, sport); -- cgit v1.2.3 From ea941ac294d75d0ace50797aebf0056f6f8f7a7f Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Tue, 16 Feb 2021 17:13:42 -0700 Subject: dmaengine: idxd: Fix clobbering of SWERR overflow bit on writeback Current code blindly writes over the SWERR and the OVERFLOW bits. Write back the bits actually read instead so the driver avoids clobbering the OVERFLOW bit that comes after the register is read. Fixes: bfe1d56091c1 ("dmaengine: idxd: Init and probe for Intel data accelerators") Reported-by: Sanjay Kumar Signed-off-by: Dave Jiang Link: https://lore.kernel.org/r/161352082229.3511254.1002151220537623503.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul --- drivers/dma/idxd/irq.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/dma/idxd/irq.c b/drivers/dma/idxd/irq.c index a60ca11a5784..f1463fc58112 100644 --- a/drivers/dma/idxd/irq.c +++ b/drivers/dma/idxd/irq.c @@ -124,7 +124,9 @@ static int process_misc_interrupts(struct idxd_device *idxd, u32 cause) for (i = 0; i < 4; i++) idxd->sw_err.bits[i] = ioread64(idxd->reg_base + IDXD_SWERR_OFFSET + i * sizeof(u64)); - iowrite64(IDXD_SWERR_ACK, idxd->reg_base + IDXD_SWERR_OFFSET); + + iowrite64(idxd->sw_err.bits[0] & IDXD_SWERR_ACK, + idxd->reg_base + IDXD_SWERR_OFFSET); if (idxd->sw_err.valid && idxd->sw_err.wq_idx_valid) { int id = idxd->sw_err.wq_idx; -- cgit v1.2.3 From ea6a5735d2a61b938a302eb3629272342a9e7c46 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Mon, 22 Mar 2021 16:37:29 -0700 Subject: dmaengine: idxd: fix opcap sysfs attribute output The operation capability register is 256bits. The current output only prints out the first 64bits. Fix to output the entire 256bits. The current code omits operation caps from IAX devices. Fixes: c52ca478233c ("dmaengine: idxd: add configuration component of driver") Reported-by: Lucas Van Signed-off-by: Dave Jiang Link: https://lore.kernel.org/r/161645624963.2003736.829798666998490151.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul --- drivers/dma/idxd/sysfs.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/dma/idxd/sysfs.c b/drivers/dma/idxd/sysfs.c index 4dbb03c545e4..c27ca01cf8b2 100644 --- a/drivers/dma/idxd/sysfs.c +++ b/drivers/dma/idxd/sysfs.c @@ -1449,8 +1449,14 @@ static ssize_t op_cap_show(struct device *dev, { struct idxd_device *idxd = container_of(dev, struct idxd_device, conf_dev); + int i, rc = 0; + + for (i = 0; i < 4; i++) + rc += sysfs_emit_at(buf, rc, "%#llx ", idxd->hw.opcap.bits[i]); - return sprintf(buf, "%#llx\n", idxd->hw.opcap.bits[0]); + rc--; + rc += sysfs_emit_at(buf, rc, "\n"); + return rc; } static DEVICE_ATTR_RO(op_cap); -- cgit v1.2.3 From 0fff71c5a311e1264988179f7dcc217fda15fadd Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Wed, 7 Apr 2021 12:59:47 -0700 Subject: dmaengine: idxd: fix wq size store permission state WQ size can only be changed when the device is disabled. Current code allows change when device is enabled but wq is disabled. Change the check to detect device state. Fixes: c52ca478233c ("dmaengine: idxd: add configuration component of driver") Signed-off-by: Dave Jiang Link: https://lore.kernel.org/r/161782558755.107710.18138252584838406025.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul --- drivers/dma/idxd/sysfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/dma/idxd/sysfs.c b/drivers/dma/idxd/sysfs.c index c27ca01cf8b2..5f7bc4b1621a 100644 --- a/drivers/dma/idxd/sysfs.c +++ b/drivers/dma/idxd/sysfs.c @@ -989,7 +989,7 @@ static ssize_t wq_size_store(struct device *dev, if (!test_bit(IDXD_FLAG_CONFIGURABLE, &idxd->flags)) return -EPERM; - if (wq->state != IDXD_WQ_DISABLED) + if (idxd->state == IDXD_DEV_ENABLED) return -EPERM; if (size + total_claimed_wq_size(idxd) - wq->size > idxd->max_wq_size) -- cgit v1.2.3 From 88cd1d6191b13689094310c2405394e4ce36d061 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Wed, 24 Mar 2021 16:17:57 +0200 Subject: dmaengine: dw: Make it dependent to HAS_IOMEM Some architectures do not provide devm_*() APIs. Hence make the driver dependent on HAVE_IOMEM. Fixes: dbde5c2934d1 ("dw_dmac: use devm_* functions to simplify code") Reported-by: kernel test robot Signed-off-by: Andy Shevchenko Acked-by: Viresh Kumar Link: https://lore.kernel.org/r/20210324141757.24710-1-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul --- drivers/dma/dw/Kconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/dma/dw/Kconfig b/drivers/dma/dw/Kconfig index e5162690de8f..db25f9b7778c 100644 --- a/drivers/dma/dw/Kconfig +++ b/drivers/dma/dw/Kconfig @@ -10,6 +10,7 @@ config DW_DMAC_CORE config DW_DMAC tristate "Synopsys DesignWare AHB DMA platform driver" + depends on HAS_IOMEM select DW_DMAC_CORE help Support the Synopsys DesignWare AHB DMA controller. This @@ -18,6 +19,7 @@ config DW_DMAC config DW_DMAC_PCI tristate "Synopsys DesignWare AHB DMA PCI driver" depends on PCI + depends on HAS_IOMEM select DW_DMAC_CORE help Support the Synopsys DesignWare AHB DMA controller on the -- cgit v1.2.3 From ea45b6008f8095db0cc09ad6e03c7785c2986197 Mon Sep 17 00:00:00 2001 From: Lv Yunlong Date: Tue, 30 Mar 2021 18:44:58 -0700 Subject: dmaengine: Fix a double free in dma_async_device_register In the first list_for_each_entry() macro of dma_async_device_register, it gets the chan from list and calls __dma_async_device_channel_register (..,chan). We can see that chan->local is allocated by alloc_percpu() and it is freed chan->local by free_percpu(chan->local) when __dma_async_device_channel_register() failed. But after __dma_async_device_channel_register() failed, the caller will goto err_out and freed the chan->local in the second time by free_percpu(). The cause of this problem is forget to set chan->local to NULL when chan->local was freed in __dma_async_device_channel_register(). My patch sets chan->local to NULL when the callee failed to avoid double free. Fixes: d2fb0a0438384 ("dmaengine: break out channel registration") Signed-off-by: Lv Yunlong Reviewed-by: Dave Jiang Link: https://lore.kernel.org/r/20210331014458.3944-1-lyl2019@mail.ustc.edu.cn Signed-off-by: Vinod Koul --- drivers/dma/dmaengine.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index fe6a460c4373..af3ee288bc11 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -1086,6 +1086,7 @@ static int __dma_async_device_channel_register(struct dma_device *device, kfree(chan->dev); err_free_local: free_percpu(chan->local); + chan->local = NULL; return rc; } -- cgit v1.2.3 From 917a3200b9f467a154999c7572af345f2470aaf4 Mon Sep 17 00:00:00 2001 From: Dinghao Liu Date: Fri, 9 Apr 2021 16:28:05 +0800 Subject: dmaengine: tegra20: Fix runtime PM imbalance on error pm_runtime_get_sync() will increase the runtime PM counter even it returns an error. Thus a pairing decrement is needed to prevent refcount leak. Fix this by replacing this API with pm_runtime_resume_and_get(), which will not change the runtime PM counter on error. Signed-off-by: Dinghao Liu Acked-by: Thierry Reding Link: https://lore.kernel.org/r/20210409082805.23643-1-dinghao.liu@zju.edu.cn Signed-off-by: Vinod Koul --- drivers/dma/tegra20-apb-dma.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c index 71827d9b0aa1..b7260749e8ee 100644 --- a/drivers/dma/tegra20-apb-dma.c +++ b/drivers/dma/tegra20-apb-dma.c @@ -723,7 +723,7 @@ static void tegra_dma_issue_pending(struct dma_chan *dc) goto end; } if (!tdc->busy) { - err = pm_runtime_get_sync(tdc->tdma->dev); + err = pm_runtime_resume_and_get(tdc->tdma->dev); if (err < 0) { dev_err(tdc2dev(tdc), "Failed to enable DMA\n"); goto end; @@ -818,7 +818,7 @@ static void tegra_dma_synchronize(struct dma_chan *dc) struct tegra_dma_channel *tdc = to_tegra_dma_chan(dc); int err; - err = pm_runtime_get_sync(tdc->tdma->dev); + err = pm_runtime_resume_and_get(tdc->tdma->dev); if (err < 0) { dev_err(tdc2dev(tdc), "Failed to synchronize DMA: %d\n", err); return; -- cgit v1.2.3 From 07503e6aefe4a6efd777062191944a14f03b3a18 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 23 Mar 2021 16:19:59 +0300 Subject: dmaengine: plx_dma: add a missing put_device() on error path Add a missing put_device(&pdev->dev) if the call to dma_async_device_register(dma); fails. Fixes: 905ca51e63be ("dmaengine: plx-dma: Introduce PLX DMA engine PCI driver skeleton") Signed-off-by: Dan Carpenter Reviewed-by: Logan Gunthorpe Link: https://lore.kernel.org/r/YFnq/0IQzixtAbC1@mwanda Signed-off-by: Vinod Koul --- drivers/dma/plx_dma.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/plx_dma.c b/drivers/dma/plx_dma.c index f387c5bbc170..166934544161 100644 --- a/drivers/dma/plx_dma.c +++ b/drivers/dma/plx_dma.c @@ -507,10 +507,8 @@ static int plx_dma_create(struct pci_dev *pdev) rc = request_irq(pci_irq_vector(pdev, 0), plx_dma_isr, 0, KBUILD_MODNAME, plxdev); - if (rc) { - kfree(plxdev); - return rc; - } + if (rc) + goto free_plx; spin_lock_init(&plxdev->ring_lock); tasklet_setup(&plxdev->desc_task, plx_dma_desc_task); @@ -540,14 +538,20 @@ static int plx_dma_create(struct pci_dev *pdev) rc = dma_async_device_register(dma); if (rc) { pci_err(pdev, "Failed to register dma device: %d\n", rc); - free_irq(pci_irq_vector(pdev, 0), plxdev); - kfree(plxdev); - return rc; + goto put_device; } pci_set_drvdata(pdev, plxdev); return 0; + +put_device: + put_device(&pdev->dev); + free_irq(pci_irq_vector(pdev, 0), plxdev); +free_plx: + kfree(plxdev); + + return rc; } static int plx_dma_probe(struct pci_dev *pdev, -- cgit v1.2.3 From 11664169981a025b7f6072d136ac724294b7b65c Mon Sep 17 00:00:00 2001 From: Lyude Paul Date: Thu, 18 Mar 2021 13:02:02 -0400 Subject: drm/i915/dpcd_bl: Don't try vesa interface unless specified by VBT Looks like that there actually are another subset of laptops on the market that don't support the Intel HDR backlight interface, but do advertise support for the VESA DPCD backlight interface despite the fact it doesn't seem to work. Note though I'm not entirely clear on this - on one of the machines where this issue was observed, I also noticed that we appeared to be rejecting the VBT defined backlight frequency in intel_dp_aux_vesa_calc_max_backlight(). It's noted in this function that: /* Use highest possible value of Pn for more granularity of brightness * adjustment while satifying the conditions below. * ... * - FxP is within 25% of desired value. * Note: 25% is arbitrary value and may need some tweak. */ So it's possible that this value might just need to be tweaked, but for now let's just disable the VESA backlight interface unless it's specified in the VBT just to be safe. We might be able to try enabling this again by default in the future. Fixes: 2227816e647a ("drm/i915/dp: Allow forcing specific interfaces through enable_dpcd_backlight") Cc: Jani Nikula Cc: Rodrigo Vivi Bugzilla: https://gitlab.freedesktop.org/drm/intel/-/issues/3169 Signed-off-by: Lyude Paul Reviewed-by: Jani Nikula Link: https://patchwork.freedesktop.org/patch/msgid/20210318170204.513000-1-lyude@redhat.com (cherry picked from commit 9e2eb6d5380e9dadcd2baecb51f238e5eba94bee) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c index 651884390137..4f8337c7fd2e 100644 --- a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c +++ b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c @@ -646,7 +646,6 @@ int intel_dp_aux_init_backlight_funcs(struct intel_connector *connector) break; case INTEL_BACKLIGHT_DISPLAY_DDI: try_intel_interface = true; - try_vesa_interface = true; break; default: return -ENODEV; -- cgit v1.2.3 From bf52dc49ba0101f648b4c3ea26b812061406b0d4 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Sat, 27 Mar 2021 02:59:45 +0200 Subject: drm/i915: Don't zero out the Y plane's watermarks MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Don't zero out the watermarks for the Y plane since we've already computed them when computing the UV plane's watermarks (since the UV plane always appears before ethe Y plane when iterating through the planes). This leads to allocating no DDB for the Y plane since .min_ddb_alloc also gets zeroed. And that of course leads to underruns when scanning out planar formats. Cc: stable@vger.kernel.org Cc: Stanislav Lisovskiy Fixes: dbf71381d733 ("drm/i915: Nuke intel_atomic_crtc_state_for_each_plane_state() from skl+ wm code") Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20210327005945.4929-1-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy (cherry picked from commit f99b805fb9413ff007ca0b6add871737664117dd) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/intel_pm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 97b57acc02e2..4b4d8d034782 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -5471,12 +5471,12 @@ static int icl_build_plane_wm(struct intel_crtc_state *crtc_state, struct skl_plane_wm *wm = &crtc_state->wm.skl.raw.planes[plane_id]; int ret; - memset(wm, 0, sizeof(*wm)); - /* Watermarks calculated in master */ if (plane_state->planar_slave) return 0; + memset(wm, 0, sizeof(*wm)); + if (plane_state->planar_linked_plane) { const struct drm_framebuffer *fb = plane_state->hw.fb; enum plane_id y_plane_id = plane_state->planar_linked_plane->id; -- cgit v1.2.3 From aee6f25e9c911323aa89a200e1bb160c1613ed3d Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 25 Mar 2021 12:48:22 +0100 Subject: drm/i915/display/vlv_dsi: Do not skip panel_pwr_cycle_delay when disabling the panel MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit After the recently added commit fe0f1e3bfdfe ("drm/i915: Shut down displays gracefully on reboot"), the DSI panel on a Cherry Trail based Predia Basic tablet would no longer properly light up after reboot. I've managed to reproduce this without rebooting by doing: chvt 3; echo 1 > /sys/class/graphics/fb0/blank;\ echo 0 > /sys/class/graphics/fb0/blank Which rapidly turns the panel off and back on again. The vlv_dsi.c code uses an intel_dsi_msleep() helper for the various delays used for panel on/off, since starting with MIPI-sequences version >= 3 the delays are already included inside the MIPI-sequences. The problems exposed by the "Shut down displays gracefully on reboot" change, show that using this helper for the panel_pwr_cycle_delay is not the right thing to do. This has not been noticed until now because normally the panel never is cycled off and directly on again in quick succession. Change the msleep for the panel_pwr_cycle_delay to a normal msleep() call to avoid the panel staying black after a quick off + on cycle. Cc: Ville Syrjälä Fixes: fe0f1e3bfdfe ("drm/i915: Shut down displays gracefully on reboot") Signed-off-by: Hans de Goede Reviewed-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20210325114823.44922-1-hdegoede@redhat.com (cherry picked from commit 2878b29fc25a0dac0e1c6c94177f07c7f94240f0) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/display/vlv_dsi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/display/vlv_dsi.c b/drivers/gpu/drm/i915/display/vlv_dsi.c index f94025ec603a..a9a8ba1d3aba 100644 --- a/drivers/gpu/drm/i915/display/vlv_dsi.c +++ b/drivers/gpu/drm/i915/display/vlv_dsi.c @@ -992,14 +992,14 @@ static void intel_dsi_post_disable(struct intel_atomic_state *state, * FIXME As we do with eDP, just make a note of the time here * and perform the wait before the next panel power on. */ - intel_dsi_msleep(intel_dsi, intel_dsi->panel_pwr_cycle_delay); + msleep(intel_dsi->panel_pwr_cycle_delay); } static void intel_dsi_shutdown(struct intel_encoder *encoder) { struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder); - intel_dsi_msleep(intel_dsi, intel_dsi->panel_pwr_cycle_delay); + msleep(intel_dsi->panel_pwr_cycle_delay); } static bool intel_dsi_get_hw_state(struct intel_encoder *encoder, -- cgit v1.2.3 From 6df0e6c57dfc064af330071f372f11aa8c584997 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Mon, 12 Apr 2021 09:23:27 -0700 Subject: dmaengine: idxd: clear MSIX permission entry on shutdown Add disabling/clearing of MSIX permission entries on device shutdown to mirror the enabling of the MSIX entries on probe. Current code left the MSIX enabled and the pasid entries still programmed at device shutdown. Fixes: 8e50d392652f ("dmaengine: idxd: Add shared workqueue support") Signed-off-by: Dave Jiang Link: https://lore.kernel.org/r/161824457969.882533.6020239898682672311.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul --- drivers/dma/idxd/device.c | 30 ++++++++++++++++++++++++++++++ drivers/dma/idxd/idxd.h | 2 ++ drivers/dma/idxd/init.c | 11 ++--------- 3 files changed, 34 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/idxd/device.c b/drivers/dma/idxd/device.c index 84a6ea60ecf0..c09687013d29 100644 --- a/drivers/dma/idxd/device.c +++ b/drivers/dma/idxd/device.c @@ -574,6 +574,36 @@ void idxd_device_drain_pasid(struct idxd_device *idxd, int pasid) } /* Device configuration bits */ +void idxd_msix_perm_setup(struct idxd_device *idxd) +{ + union msix_perm mperm; + int i, msixcnt; + + msixcnt = pci_msix_vec_count(idxd->pdev); + if (msixcnt < 0) + return; + + mperm.bits = 0; + mperm.pasid = idxd->pasid; + mperm.pasid_en = device_pasid_enabled(idxd); + for (i = 1; i < msixcnt; i++) + iowrite32(mperm.bits, idxd->reg_base + idxd->msix_perm_offset + i * 8); +} + +void idxd_msix_perm_clear(struct idxd_device *idxd) +{ + union msix_perm mperm; + int i, msixcnt; + + msixcnt = pci_msix_vec_count(idxd->pdev); + if (msixcnt < 0) + return; + + mperm.bits = 0; + for (i = 1; i < msixcnt; i++) + iowrite32(mperm.bits, idxd->reg_base + idxd->msix_perm_offset + i * 8); +} + static void idxd_group_config_write(struct idxd_group *group) { struct idxd_device *idxd = group->idxd; diff --git a/drivers/dma/idxd/idxd.h b/drivers/dma/idxd/idxd.h index 81a0e65fd316..eda2ee10501f 100644 --- a/drivers/dma/idxd/idxd.h +++ b/drivers/dma/idxd/idxd.h @@ -316,6 +316,8 @@ void idxd_unregister_driver(void); struct bus_type *idxd_get_bus_type(struct idxd_device *idxd); /* device interrupt control */ +void idxd_msix_perm_setup(struct idxd_device *idxd); +void idxd_msix_perm_clear(struct idxd_device *idxd); irqreturn_t idxd_irq_handler(int vec, void *data); irqreturn_t idxd_misc_thread(int vec, void *data); irqreturn_t idxd_wq_thread(int irq, void *data); diff --git a/drivers/dma/idxd/init.c b/drivers/dma/idxd/init.c index 085a0c3b62c6..6584b0ec07d5 100644 --- a/drivers/dma/idxd/init.c +++ b/drivers/dma/idxd/init.c @@ -65,7 +65,6 @@ static int idxd_setup_interrupts(struct idxd_device *idxd) struct idxd_irq_entry *irq_entry; int i, msixcnt; int rc = 0; - union msix_perm mperm; msixcnt = pci_msix_vec_count(pdev); if (msixcnt < 0) { @@ -144,14 +143,7 @@ static int idxd_setup_interrupts(struct idxd_device *idxd) } idxd_unmask_error_interrupts(idxd); - - /* Setup MSIX permission table */ - mperm.bits = 0; - mperm.pasid = idxd->pasid; - mperm.pasid_en = device_pasid_enabled(idxd); - for (i = 1; i < msixcnt; i++) - iowrite32(mperm.bits, idxd->reg_base + idxd->msix_perm_offset + i * 8); - + idxd_msix_perm_setup(idxd); return 0; err_no_irq: @@ -510,6 +502,7 @@ static void idxd_shutdown(struct pci_dev *pdev) idxd_flush_work_list(irq_entry); } + idxd_msix_perm_clear(idxd); destroy_workqueue(idxd->wq); } -- cgit v1.2.3 From ea9aadc06a9f10ad20a90edc0a484f1147d88a7a Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Mon, 12 Apr 2021 09:02:36 -0700 Subject: dmaengine: idxd: fix wq cleanup of WQCFG registers A pre-release silicon erratum workaround where wq reset does not clear WQCFG registers was leaked into upstream code. Use wq reset command instead of blasting the MMIO region. This also address an issue where we clobber registers in future devices. Fixes: da32b28c95a7 ("dmaengine: idxd: cleanup workqueue config after disabling") Reported-by: Shreenivaas Devarajan Signed-off-by: Dave Jiang Link: https://lore.kernel.org/r/161824330020.881560.16375921906426627033.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul --- drivers/dma/idxd/device.c | 35 ++++++++++++++++++++++++----------- drivers/dma/idxd/idxd.h | 1 + drivers/dma/idxd/sysfs.c | 9 ++------- 3 files changed, 27 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/idxd/device.c b/drivers/dma/idxd/device.c index c09687013d29..31c819544a22 100644 --- a/drivers/dma/idxd/device.c +++ b/drivers/dma/idxd/device.c @@ -282,6 +282,22 @@ void idxd_wq_drain(struct idxd_wq *wq) idxd_cmd_exec(idxd, IDXD_CMD_DRAIN_WQ, operand, NULL); } +void idxd_wq_reset(struct idxd_wq *wq) +{ + struct idxd_device *idxd = wq->idxd; + struct device *dev = &idxd->pdev->dev; + u32 operand; + + if (wq->state != IDXD_WQ_ENABLED) { + dev_dbg(dev, "WQ %d in wrong state: %d\n", wq->id, wq->state); + return; + } + + operand = BIT(wq->id % 16) | ((wq->id / 16) << 16); + idxd_cmd_exec(idxd, IDXD_CMD_RESET_WQ, operand, NULL); + wq->state = IDXD_WQ_DISABLED; +} + int idxd_wq_map_portal(struct idxd_wq *wq) { struct idxd_device *idxd = wq->idxd; @@ -363,8 +379,6 @@ int idxd_wq_disable_pasid(struct idxd_wq *wq) void idxd_wq_disable_cleanup(struct idxd_wq *wq) { struct idxd_device *idxd = wq->idxd; - struct device *dev = &idxd->pdev->dev; - int i, wq_offset; lockdep_assert_held(&idxd->dev_lock); memset(wq->wqcfg, 0, idxd->wqcfg_size); @@ -376,14 +390,6 @@ void idxd_wq_disable_cleanup(struct idxd_wq *wq) wq->ats_dis = 0; clear_bit(WQ_FLAG_DEDICATED, &wq->flags); memset(wq->name, 0, WQ_NAME_SIZE); - - for (i = 0; i < WQCFG_STRIDES(idxd); i++) { - wq_offset = WQCFG_OFFSET(idxd, wq->id, i); - iowrite32(0, idxd->reg_base + wq_offset); - dev_dbg(dev, "WQ[%d][%d][%#x]: %#x\n", - wq->id, i, wq_offset, - ioread32(idxd->reg_base + wq_offset)); - } } /* Device control bits */ @@ -672,7 +678,14 @@ static int idxd_wq_config_write(struct idxd_wq *wq) if (!wq->group) return 0; - memset(wq->wqcfg, 0, idxd->wqcfg_size); + /* + * Instead of memset the entire shadow copy of WQCFG, copy from the hardware after + * wq reset. This will copy back the sticky values that are present on some devices. + */ + for (i = 0; i < WQCFG_STRIDES(idxd); i++) { + wq_offset = WQCFG_OFFSET(idxd, wq->id, i); + wq->wqcfg->bits[i] = ioread32(idxd->reg_base + wq_offset); + } /* byte 0-3 */ wq->wqcfg->wq_size = wq->size; diff --git a/drivers/dma/idxd/idxd.h b/drivers/dma/idxd/idxd.h index eda2ee10501f..76014c14f473 100644 --- a/drivers/dma/idxd/idxd.h +++ b/drivers/dma/idxd/idxd.h @@ -343,6 +343,7 @@ void idxd_wq_free_resources(struct idxd_wq *wq); int idxd_wq_enable(struct idxd_wq *wq); int idxd_wq_disable(struct idxd_wq *wq); void idxd_wq_drain(struct idxd_wq *wq); +void idxd_wq_reset(struct idxd_wq *wq); int idxd_wq_map_portal(struct idxd_wq *wq); void idxd_wq_unmap_portal(struct idxd_wq *wq); void idxd_wq_disable_cleanup(struct idxd_wq *wq); diff --git a/drivers/dma/idxd/sysfs.c b/drivers/dma/idxd/sysfs.c index 5f7bc4b1621a..18bf4d148989 100644 --- a/drivers/dma/idxd/sysfs.c +++ b/drivers/dma/idxd/sysfs.c @@ -275,7 +275,6 @@ static void disable_wq(struct idxd_wq *wq) { struct idxd_device *idxd = wq->idxd; struct device *dev = &idxd->pdev->dev; - int rc; mutex_lock(&wq->wq_lock); dev_dbg(dev, "%s removing WQ %s\n", __func__, dev_name(&wq->conf_dev)); @@ -296,17 +295,13 @@ static void disable_wq(struct idxd_wq *wq) idxd_wq_unmap_portal(wq); idxd_wq_drain(wq); - rc = idxd_wq_disable(wq); + idxd_wq_reset(wq); idxd_wq_free_resources(wq); wq->client_count = 0; mutex_unlock(&wq->wq_lock); - if (rc < 0) - dev_warn(dev, "Failed to disable %s: %d\n", - dev_name(&wq->conf_dev), rc); - else - dev_info(dev, "wq %s disabled\n", dev_name(&wq->conf_dev)); + dev_info(dev, "wq %s disabled\n", dev_name(&wq->conf_dev)); } static int idxd_config_bus_remove(struct device *dev) -- cgit v1.2.3 From 1fe976d308acb6374c899a4ee8025a0a016e453e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Pali=20Roh=C3=A1r?= Date: Mon, 12 Apr 2021 18:57:39 +0200 Subject: net: phy: marvell: fix detection of PHY on Topaz switches MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since commit fee2d546414d ("net: phy: marvell: mv88e6390 temperature sensor reading"), Linux reports the temperature of Topaz hwmon as constant -75°C. This is because switches from the Topaz family (88E6141 / 88E6341) have the address of the temperature sensor register different from Peridot. This address is instead compatible with 88E1510 PHYs, as was used for Topaz before the above mentioned commit. Create a new mapping table between switch family and PHY ID for families which don't have a model number. And define PHY IDs for Topaz and Peridot families. Create a new PHY ID and a new PHY driver for Topaz's internal PHY. The only difference from Peridot's PHY driver is the HWMON probing method. Prior this change Topaz's internal PHY is detected by kernel as: PHY [...] driver [Marvell 88E6390] (irq=63) And afterwards as: PHY [...] driver [Marvell 88E6341 Family] (irq=63) Signed-off-by: Pali Rohár BugLink: https://github.com/globalscaletechnologies/linux/issues/1 Fixes: fee2d546414d ("net: phy: marvell: mv88e6390 temperature sensor reading") Reviewed-by: Marek Behún Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/chip.c | 30 +++++++++++++----------------- drivers/net/phy/marvell.c | 32 +++++++++++++++++++++++++++++--- 2 files changed, 42 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index 903d619e08ed..e08bf9377140 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -3026,10 +3026,17 @@ out_resources: return err; } +/* prod_id for switch families which do not have a PHY model number */ +static const u16 family_prod_id_table[] = { + [MV88E6XXX_FAMILY_6341] = MV88E6XXX_PORT_SWITCH_ID_PROD_6341, + [MV88E6XXX_FAMILY_6390] = MV88E6XXX_PORT_SWITCH_ID_PROD_6390, +}; + static int mv88e6xxx_mdio_read(struct mii_bus *bus, int phy, int reg) { struct mv88e6xxx_mdio_bus *mdio_bus = bus->priv; struct mv88e6xxx_chip *chip = mdio_bus->chip; + u16 prod_id; u16 val; int err; @@ -3040,23 +3047,12 @@ static int mv88e6xxx_mdio_read(struct mii_bus *bus, int phy, int reg) err = chip->info->ops->phy_read(chip, bus, phy, reg, &val); mv88e6xxx_reg_unlock(chip); - if (reg == MII_PHYSID2) { - /* Some internal PHYs don't have a model number. */ - if (chip->info->family != MV88E6XXX_FAMILY_6165) - /* Then there is the 6165 family. It gets is - * PHYs correct. But it can also have two - * SERDES interfaces in the PHY address - * space. And these don't have a model - * number. But they are not PHYs, so we don't - * want to give them something a PHY driver - * will recognise. - * - * Use the mv88e6390 family model number - * instead, for anything which really could be - * a PHY, - */ - if (!(val & 0x3f0)) - val |= MV88E6XXX_PORT_SWITCH_ID_PROD_6390 >> 4; + /* Some internal PHYs don't have a model number. */ + if (reg == MII_PHYSID2 && !(val & 0x3f0) && + chip->info->family < ARRAY_SIZE(family_prod_id_table)) { + prod_id = family_prod_id_table[chip->info->family]; + if (prod_id) + val |= prod_id >> 4; } return err ? err : val; diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index e26a5d663f8a..8018ddf7f316 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -3021,9 +3021,34 @@ static struct phy_driver marvell_drivers[] = { .get_stats = marvell_get_stats, }, { - .phy_id = MARVELL_PHY_ID_88E6390, + .phy_id = MARVELL_PHY_ID_88E6341_FAMILY, .phy_id_mask = MARVELL_PHY_ID_MASK, - .name = "Marvell 88E6390", + .name = "Marvell 88E6341 Family", + /* PHY_GBIT_FEATURES */ + .flags = PHY_POLL_CABLE_TEST, + .probe = m88e1510_probe, + .config_init = marvell_config_init, + .config_aneg = m88e6390_config_aneg, + .read_status = marvell_read_status, + .config_intr = marvell_config_intr, + .handle_interrupt = marvell_handle_interrupt, + .resume = genphy_resume, + .suspend = genphy_suspend, + .read_page = marvell_read_page, + .write_page = marvell_write_page, + .get_sset_count = marvell_get_sset_count, + .get_strings = marvell_get_strings, + .get_stats = marvell_get_stats, + .get_tunable = m88e1540_get_tunable, + .set_tunable = m88e1540_set_tunable, + .cable_test_start = marvell_vct7_cable_test_start, + .cable_test_tdr_start = marvell_vct5_cable_test_tdr_start, + .cable_test_get_status = marvell_vct7_cable_test_get_status, + }, + { + .phy_id = MARVELL_PHY_ID_88E6390_FAMILY, + .phy_id_mask = MARVELL_PHY_ID_MASK, + .name = "Marvell 88E6390 Family", /* PHY_GBIT_FEATURES */ .flags = PHY_POLL_CABLE_TEST, .probe = m88e6390_probe, @@ -3107,7 +3132,8 @@ static struct mdio_device_id __maybe_unused marvell_tbl[] = { { MARVELL_PHY_ID_88E1540, MARVELL_PHY_ID_MASK }, { MARVELL_PHY_ID_88E1545, MARVELL_PHY_ID_MASK }, { MARVELL_PHY_ID_88E3016, MARVELL_PHY_ID_MASK }, - { MARVELL_PHY_ID_88E6390, MARVELL_PHY_ID_MASK }, + { MARVELL_PHY_ID_88E6341_FAMILY, MARVELL_PHY_ID_MASK }, + { MARVELL_PHY_ID_88E6390_FAMILY, MARVELL_PHY_ID_MASK }, { MARVELL_PHY_ID_88E1340S, MARVELL_PHY_ID_MASK }, { MARVELL_PHY_ID_88E1548P, MARVELL_PHY_ID_MASK }, { } -- cgit v1.2.3 From 196d941753297d0ca73c563ccd7d00be049ec226 Mon Sep 17 00:00:00 2001 From: Yuanyuan Zhong Date: Mon, 12 Apr 2021 17:17:59 -0600 Subject: pinctrl: lewisburg: Update number of pins in community When updating pin names for Intel Lewisburg, the numbers of pins were left behind. Update them accordingly. Fixes: e66ff71fd0db ("pinctrl: lewisburg: Update pin list according to v1.1v6") Signed-off-by: Yuanyuan Zhong Signed-off-by: Andy Shevchenko --- drivers/pinctrl/intel/pinctrl-lewisburg.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/pinctrl/intel/pinctrl-lewisburg.c b/drivers/pinctrl/intel/pinctrl-lewisburg.c index 7fdf4257df1e..ad4b446d588e 100644 --- a/drivers/pinctrl/intel/pinctrl-lewisburg.c +++ b/drivers/pinctrl/intel/pinctrl-lewisburg.c @@ -299,9 +299,9 @@ static const struct pinctrl_pin_desc lbg_pins[] = { static const struct intel_community lbg_communities[] = { LBG_COMMUNITY(0, 0, 71), LBG_COMMUNITY(1, 72, 132), - LBG_COMMUNITY(3, 133, 144), - LBG_COMMUNITY(4, 145, 180), - LBG_COMMUNITY(5, 181, 246), + LBG_COMMUNITY(3, 133, 143), + LBG_COMMUNITY(4, 144, 178), + LBG_COMMUNITY(5, 179, 246), }; static const struct intel_pinctrl_soc_data lbg_soc_data = { -- cgit v1.2.3 From 909290786ea335366e21d7f1ed5812b90f2f0a92 Mon Sep 17 00:00:00 2001 From: "Christian A. Ehrhardt" Date: Mon, 12 Apr 2021 23:41:24 +0200 Subject: vfio/pci: Add missing range check in vfio_pci_mmap When mmaping an extra device region verify that the region index derived from the mmap offset is valid. Fixes: a15b1883fee1 ("vfio_pci: Allow mapping extra regions") Cc: stable@vger.kernel.org Signed-off-by: Christian A. Ehrhardt Message-Id: <20210412214124.GA241759@lisa.in-ulm.de> Reviewed-by: David Gibson Reviewed-by: Cornelia Huck Signed-off-by: Alex Williamson --- drivers/vfio/pci/vfio_pci.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c index 65e7e6b44578..5023e23db3bc 100644 --- a/drivers/vfio/pci/vfio_pci.c +++ b/drivers/vfio/pci/vfio_pci.c @@ -1656,6 +1656,8 @@ static int vfio_pci_mmap(void *device_data, struct vm_area_struct *vma) index = vma->vm_pgoff >> (VFIO_PCI_OFFSET_SHIFT - PAGE_SHIFT); + if (index >= VFIO_PCI_NUM_REGIONS + vdev->num_regions) + return -EINVAL; if (vma->vm_end < vma->vm_start) return -EINVAL; if ((vma->vm_flags & VM_SHARED) == 0) @@ -1664,7 +1666,7 @@ static int vfio_pci_mmap(void *device_data, struct vm_area_struct *vma) int regnum = index - VFIO_PCI_NUM_REGIONS; struct vfio_pci_region *region = vdev->region + regnum; - if (region && region->ops && region->ops->mmap && + if (region->ops && region->ops->mmap && (region->flags & VFIO_REGION_INFO_FLAG_MMAP)) return region->ops->mmap(vdev, region, vma); return -EINVAL; -- cgit v1.2.3 From 31166efb1cee348eb6314e9c0095d84cbeb66b9d Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Mon, 8 Mar 2021 12:41:56 -0800 Subject: ixgbe: Fix NULL pointer dereference in ethtool loopback test MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The ixgbe driver currently generates a NULL pointer dereference when performing the ethtool loopback test. This is due to the fact that there isn't a q_vector associated with the test ring when it is setup as interrupts are not normally added to the test rings. To address this I have added code that will check for a q_vector before returning a napi_id value. If a q_vector is not present it will return a value of 0. Fixes: b02e5a0ebb17 ("xsk: Propagate napi_id to XDP socket Rx path") Signed-off-by: Alexander Duyck Acked-by: Björn Töpel Tested-by: Dave Switzer Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 03d9aad516d4..45d2c8f37c01 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -6536,6 +6536,13 @@ err_setup_tx: return err; } +static int ixgbe_rx_napi_id(struct ixgbe_ring *rx_ring) +{ + struct ixgbe_q_vector *q_vector = rx_ring->q_vector; + + return q_vector ? q_vector->napi.napi_id : 0; +} + /** * ixgbe_setup_rx_resources - allocate Rx resources (Descriptors) * @adapter: pointer to ixgbe_adapter @@ -6583,7 +6590,7 @@ int ixgbe_setup_rx_resources(struct ixgbe_adapter *adapter, /* XDP RX-queue info */ if (xdp_rxq_info_reg(&rx_ring->xdp_rxq, adapter->netdev, - rx_ring->queue_index, rx_ring->q_vector->napi.napi_id) < 0) + rx_ring->queue_index, ixgbe_rx_napi_id(rx_ring)) < 0) goto err; rx_ring->xdp_prog = adapter->xdp_prog; -- cgit v1.2.3 From debb9df311582c83fe369baa35fa4b92e8a9c58a Mon Sep 17 00:00:00 2001 From: Yongxin Liu Date: Mon, 22 Mar 2021 15:14:48 +0800 Subject: ixgbe: fix unbalanced device enable/disable in suspend/resume pci_disable_device() called in __ixgbe_shutdown() decreases dev->enable_cnt by 1. pci_enable_device_mem() which increases dev->enable_cnt by 1, was removed from ixgbe_resume() in commit 6f82b2558735 ("ixgbe: use generic power management"). This caused unbalanced increase/decrease. So add pci_enable_device_mem() back. Fix the following call trace. ixgbe 0000:17:00.1: disabling already-disabled device Call Trace: __ixgbe_shutdown+0x10a/0x1e0 [ixgbe] ixgbe_suspend+0x32/0x70 [ixgbe] pci_pm_suspend+0x87/0x160 ? pci_pm_freeze+0xd0/0xd0 dpm_run_callback+0x42/0x170 __device_suspend+0x114/0x460 async_suspend+0x1f/0xa0 async_run_entry_fn+0x3c/0xf0 process_one_work+0x1dd/0x410 worker_thread+0x34/0x3f0 ? cancel_delayed_work+0x90/0x90 kthread+0x14c/0x170 ? kthread_park+0x90/0x90 ret_from_fork+0x1f/0x30 Fixes: 6f82b2558735 ("ixgbe: use generic power management") Signed-off-by: Yongxin Liu Tested-by: Dave Switzer Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 45d2c8f37c01..cffb95f8f632 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -6899,6 +6899,11 @@ static int __maybe_unused ixgbe_resume(struct device *dev_d) adapter->hw.hw_addr = adapter->io_addr; + err = pci_enable_device_mem(pdev); + if (err) { + e_dev_err("Cannot enable PCI device from suspend\n"); + return err; + } smp_mb__before_atomic(); clear_bit(__IXGBE_DISABLED, &adapter->state); pci_set_master(pdev); -- cgit v1.2.3 From ef963ae427aa4669905e0a96b3bd9d44dc85db32 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Wed, 31 Mar 2021 15:46:28 +0100 Subject: ice: Fix potential infinite loop when using u8 loop counter A for-loop is using a u8 loop counter that is being compared to a u32 cmp_dcbcfg->numapp to check for the end of the loop. If cmp_dcbcfg->numapp is larger than 255 then the counter j will wrap around to zero and hence an infinite loop occurs. Fix this by making counter j the same type as cmp_dcbcfg->numapp. Addresses-Coverity: ("Infinite loop") Fixes: aeac8ce864d9 ("ice: Recognize 860 as iSCSI port in CEE mode") Signed-off-by: Colin Ian King Tested-by: Tony Brelinski Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice_dcb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ice/ice_dcb.c b/drivers/net/ethernet/intel/ice/ice_dcb.c index 211ac6f907ad..28e834a128c0 100644 --- a/drivers/net/ethernet/intel/ice/ice_dcb.c +++ b/drivers/net/ethernet/intel/ice/ice_dcb.c @@ -747,8 +747,8 @@ ice_cee_to_dcb_cfg(struct ice_aqc_get_cee_dcb_cfg_resp *cee_cfg, struct ice_port_info *pi) { u32 status, tlv_status = le32_to_cpu(cee_cfg->tlv_status); - u32 ice_aqc_cee_status_mask, ice_aqc_cee_status_shift; - u8 i, j, err, sync, oper, app_index, ice_app_sel_type; + u32 ice_aqc_cee_status_mask, ice_aqc_cee_status_shift, j; + u8 i, err, sync, oper, app_index, ice_app_sel_type; u16 app_prio = le16_to_cpu(cee_cfg->oper_app_prio); u16 ice_aqc_cee_app_mask, ice_aqc_cee_app_shift; struct ice_dcbx_cfg *cmp_dcbcfg, *dcbcfg; -- cgit v1.2.3 From ca09bf7bb109a37a7ff05f230bb3fa3627e6625f Mon Sep 17 00:00:00 2001 From: Lijun Pan Date: Tue, 13 Apr 2021 03:33:25 -0500 Subject: ibmvnic: correctly use dev_consume/free_skb_irq It is more correct to use dev_kfree_skb_irq when packets are dropped, and to use dev_consume_skb_irq when packets are consumed. Fixes: 0d973388185d ("ibmvnic: Introduce xmit_more support using batched subCRQ hcalls") Suggested-by: Thomas Falcon Signed-off-by: Lijun Pan Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index 9c6438d3b3a5..110a0d0eaabb 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -3204,9 +3204,6 @@ restart_loop: next = ibmvnic_next_scrq(adapter, scrq); for (i = 0; i < next->tx_comp.num_comps; i++) { - if (next->tx_comp.rcs[i]) - dev_err(dev, "tx error %x\n", - next->tx_comp.rcs[i]); index = be32_to_cpu(next->tx_comp.correlators[i]); if (index & IBMVNIC_TSO_POOL_MASK) { tx_pool = &adapter->tso_pool[pool]; @@ -3220,7 +3217,13 @@ restart_loop: num_entries += txbuff->num_entries; if (txbuff->skb) { total_bytes += txbuff->skb->len; - dev_consume_skb_irq(txbuff->skb); + if (next->tx_comp.rcs[i]) { + dev_err(dev, "tx error %x\n", + next->tx_comp.rcs[i]); + dev_kfree_skb_irq(txbuff->skb); + } else { + dev_consume_skb_irq(txbuff->skb); + } txbuff->skb = NULL; } else { netdev_warn(adapter->netdev, -- cgit v1.2.3 From 2afeec08ab5c86ae21952151f726bfe184f6b23d Mon Sep 17 00:00:00 2001 From: Michael Brown Date: Tue, 13 Apr 2021 16:25:12 +0100 Subject: xen-netback: Check for hotplug-status existence before watching The logic in connect() is currently written with the assumption that xenbus_watch_pathfmt() will return an error for a node that does not exist. This assumption is incorrect: xenstore does allow a watch to be registered for a nonexistent node (and will send notifications should the node be subsequently created). As of commit 1f2565780 ("xen-netback: remove 'hotplug-status' once it has served its purpose"), this leads to a failure when a domU transitions into XenbusStateConnected more than once. On the first domU transition into Connected state, the "hotplug-status" node will be deleted by the hotplug_status_changed() callback in dom0. On the second or subsequent domU transition into Connected state, the hotplug_status_changed() callback will therefore never be invoked, and so the backend will remain stuck in InitWait. This failure prevents scenarios such as reloading the xen-netfront module within a domU, or booting a domU via iPXE. There is unfortunately no way for the domU to work around this dom0 bug. Fix by explicitly checking for existence of the "hotplug-status" node, thereby creating the behaviour that was previously assumed to exist. Signed-off-by: Michael Brown Reviewed-by: Paul Durrant Signed-off-by: David S. Miller --- drivers/net/xen-netback/xenbus.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/xen-netback/xenbus.c b/drivers/net/xen-netback/xenbus.c index a5439c130130..d24b7a7993aa 100644 --- a/drivers/net/xen-netback/xenbus.c +++ b/drivers/net/xen-netback/xenbus.c @@ -824,11 +824,15 @@ static void connect(struct backend_info *be) xenvif_carrier_on(be->vif); unregister_hotplug_status_watch(be); - err = xenbus_watch_pathfmt(dev, &be->hotplug_status_watch, NULL, - hotplug_status_changed, - "%s/%s", dev->nodename, "hotplug-status"); - if (!err) + if (xenbus_exists(XBT_NIL, dev->nodename, "hotplug-status")) { + err = xenbus_watch_pathfmt(dev, &be->hotplug_status_watch, + NULL, hotplug_status_changed, + "%s/%s", dev->nodename, + "hotplug-status"); + if (err) + goto err; be->have_hotplug_status_watch = 1; + } netif_tx_wake_all_queues(be->vif->dev); -- cgit v1.2.3 From 8ca7cab82bda4eb0b8064befeeeaa38106cac637 Mon Sep 17 00:00:00 2001 From: Jaegeuk Kim Date: Wed, 14 Apr 2021 08:28:28 -0700 Subject: dm verity fec: fix misaligned RS roots IO commit df7b59ba9245 ("dm verity: fix FEC for RS roots unaligned to block size") introduced the possibility for misaligned roots IO relative to the underlying device's logical block size. E.g. Android's default RS roots=2 results in dm_bufio->block_size=1024, which causes the following EIO if the logical block size of the device is 4096, given v->data_dev_block_bits=12: E sd 0 : 0:0:0: [sda] tag#30 request not aligned to the logical block size E blk_update_request: I/O error, dev sda, sector 10368424 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 E device-mapper: verity-fec: 254:8: FEC 9244672: parity read failed (block 18056): -5 Fix this by onlu using f->roots for dm_bufio blocksize IFF it is aligned to v->data_dev_block_bits. Fixes: df7b59ba9245 ("dm verity: fix FEC for RS roots unaligned to block size") Cc: stable@vger.kernel.org Signed-off-by: Jaegeuk Kim Signed-off-by: Mike Snitzer --- drivers/md/dm-verity-fec.c | 11 ++++++++--- drivers/md/dm-verity-fec.h | 1 + 2 files changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-verity-fec.c b/drivers/md/dm-verity-fec.c index 66f4c6398f67..cea2b3789736 100644 --- a/drivers/md/dm-verity-fec.c +++ b/drivers/md/dm-verity-fec.c @@ -65,7 +65,7 @@ static u8 *fec_read_parity(struct dm_verity *v, u64 rsb, int index, u8 *res; position = (index + rsb) * v->fec->roots; - block = div64_u64_rem(position, v->fec->roots << SECTOR_SHIFT, &rem); + block = div64_u64_rem(position, v->fec->io_size, &rem); *offset = (unsigned)rem; res = dm_bufio_read(v->fec->bufio, block, buf); @@ -154,7 +154,7 @@ static int fec_decode_bufs(struct dm_verity *v, struct dm_verity_fec_io *fio, /* read the next block when we run out of parity bytes */ offset += v->fec->roots; - if (offset >= v->fec->roots << SECTOR_SHIFT) { + if (offset >= v->fec->io_size) { dm_bufio_release(buf); par = fec_read_parity(v, rsb, block_offset, &offset, &buf); @@ -742,8 +742,13 @@ int verity_fec_ctr(struct dm_verity *v) return -E2BIG; } + if ((f->roots << SECTOR_SHIFT) & ((1 << v->data_dev_block_bits) - 1)) + f->io_size = 1 << v->data_dev_block_bits; + else + f->io_size = v->fec->roots << SECTOR_SHIFT; + f->bufio = dm_bufio_client_create(f->dev->bdev, - f->roots << SECTOR_SHIFT, + f->io_size, 1, 0, NULL, NULL); if (IS_ERR(f->bufio)) { ti->error = "Cannot initialize FEC bufio client"; diff --git a/drivers/md/dm-verity-fec.h b/drivers/md/dm-verity-fec.h index 42fbd3a7fc9f..3c46c8d61883 100644 --- a/drivers/md/dm-verity-fec.h +++ b/drivers/md/dm-verity-fec.h @@ -36,6 +36,7 @@ struct dm_verity_fec { struct dm_dev *dev; /* parity data device */ struct dm_bufio_client *data_bufio; /* for data dev access */ struct dm_bufio_client *bufio; /* for parity data access */ + size_t io_size; /* IO size for roots */ sector_t start; /* parity data start in blocks */ sector_t blocks; /* number of blocks covered */ sector_t rounds; /* number of interleaving rounds */ -- cgit v1.2.3 From 453a77894efa4d9b6ef9644d74b9419c47ac427c Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Wed, 14 Apr 2021 10:47:10 +0200 Subject: r8169: don't advertise pause in jumbo mode It has been reported [0] that using pause frames in jumbo mode impacts performance. There's no available chip documentation, but vendor drivers r8168 and r8125 don't advertise pause in jumbo mode. So let's do the same, according to Roman it fixes the issue. [0] https://bugzilla.kernel.org/show_bug.cgi?id=212617 Fixes: 9cf9b84cc701 ("r8169: make use of phy_set_asym_pause") Reported-by: Roman Mamedov Tested-by: Roman Mamedov Signed-off-by: Heiner Kallweit Cc: stable@vger.kernel.org Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169_main.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c index 581a92fc3292..1df2c002c9f6 100644 --- a/drivers/net/ethernet/realtek/r8169_main.c +++ b/drivers/net/ethernet/realtek/r8169_main.c @@ -2350,6 +2350,13 @@ static void rtl_jumbo_config(struct rtl8169_private *tp) if (pci_is_pcie(tp->pci_dev) && tp->supports_gmii) pcie_set_readrq(tp->pci_dev, readrq); + + /* Chip doesn't support pause in jumbo mode */ + linkmode_mod_bit(ETHTOOL_LINK_MODE_Pause_BIT, + tp->phydev->advertising, !jumbo); + linkmode_mod_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, + tp->phydev->advertising, !jumbo); + phy_start_aneg(tp->phydev); } DECLARE_RTL_COND(rtl_chipcmd_cond) @@ -4630,8 +4637,6 @@ static int r8169_phy_connect(struct rtl8169_private *tp) if (!tp->supports_gmii) phy_set_max_speed(phydev, SPEED_100); - phy_support_asym_pause(phydev); - phy_attached_info(phydev); return 0; -- cgit v1.2.3 From 0775ebc4cf8554bdcd2c212669a0868ab68df5c0 Mon Sep 17 00:00:00 2001 From: Lijun Pan Date: Wed, 14 Apr 2021 02:46:14 -0500 Subject: ibmvnic: avoid calling napi_disable() twice __ibmvnic_open calls napi_disable without checking whether NAPI polling has already been disabled or not. This could cause napi_disable being called twice, which could generate deadlock. For example, the first napi_disable will spin until NAPI_STATE_SCHED is cleared by napi_complete_done, then set it again. When napi_disable is called the second time, it will loop infinitely because no dev->poll will be running to clear NAPI_STATE_SCHED. To prevent above scenario from happening, call ibmvnic_napi_disable() which checks if napi is disabled or not before calling napi_disable. Fixes: bfc32f297337 ("ibmvnic: Move resource initialization to its own routine") Suggested-by: Thomas Falcon Signed-off-by: Lijun Pan Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index 110a0d0eaabb..2d27f8aa0d4b 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -1149,8 +1149,7 @@ static int __ibmvnic_open(struct net_device *netdev) rc = set_link_state(adapter, IBMVNIC_LOGICAL_LNK_UP); if (rc) { - for (i = 0; i < adapter->req_rx_queues; i++) - napi_disable(&adapter->napi[i]); + ibmvnic_napi_disable(adapter); release_resources(adapter); return rc; } -- cgit v1.2.3 From d3a6abccbd272aea7dc2c6f984bb5a2c11278e44 Mon Sep 17 00:00:00 2001 From: Lijun Pan Date: Wed, 14 Apr 2021 02:46:15 -0500 Subject: ibmvnic: remove duplicate napi_schedule call in do_reset function During adapter reset, do_reset/do_hard_reset calls ibmvnic_open(), which will calls napi_schedule if previous state is VNIC_CLOSED (i.e, the reset case, and "ifconfig down" case). So there is no need for do_reset to call napi_schedule again at the end of the function though napi_schedule will neglect the request if napi is already scheduled. Fixes: ed651a10875f ("ibmvnic: Updated reset handling") Signed-off-by: Lijun Pan Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index 2d27f8aa0d4b..f4bd63216672 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -1921,7 +1921,7 @@ static int do_reset(struct ibmvnic_adapter *adapter, u64 old_num_rx_queues, old_num_tx_queues; u64 old_num_rx_slots, old_num_tx_slots; struct net_device *netdev = adapter->netdev; - int i, rc; + int rc; netdev_dbg(adapter->netdev, "[S:%d FOP:%d] Reset reason %d, reset_state %d\n", @@ -2110,10 +2110,6 @@ static int do_reset(struct ibmvnic_adapter *adapter, /* refresh device's multicast list */ ibmvnic_set_multi(netdev); - /* kick napi */ - for (i = 0; i < adapter->req_rx_queues; i++) - napi_schedule(&adapter->napi[i]); - if (adapter->reset_reason == VNIC_RESET_FAILOVER || adapter->reset_reason == VNIC_RESET_MOBILITY) __netdev_notify_peers(netdev); -- cgit v1.2.3 From 7c451f3ef676c805a4b77a743a01a5c21a250a73 Mon Sep 17 00:00:00 2001 From: Lijun Pan Date: Wed, 14 Apr 2021 02:46:16 -0500 Subject: ibmvnic: remove duplicate napi_schedule call in open function Remove the unnecessary napi_schedule() call in __ibmvnic_open() since interrupt_rx() calls napi_schedule_prep/__napi_schedule during every receive interrupt. Fixes: ed651a10875f ("ibmvnic: Updated reset handling") Signed-off-by: Lijun Pan Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index f4bd63216672..ffb2a91750c7 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -1156,11 +1156,6 @@ static int __ibmvnic_open(struct net_device *netdev) netif_tx_start_all_queues(netdev); - if (prev_state == VNIC_CLOSED) { - for (i = 0; i < adapter->req_rx_queues; i++) - napi_schedule(&adapter->napi[i]); - } - adapter->state = VNIC_OPEN; return rc; } -- cgit v1.2.3 From 2e1534f395e73152e2051332034bff61a56a8368 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Wed, 14 Apr 2021 12:03:25 +0200 Subject: vrf: fix a comment about loopback device This is a leftover of the below commit. Fixes: 4f04256c983a ("net: vrf: Drop local rtable and rt6_info") Signed-off-by: Nicolas Dichtel Acked-by: David Ahern Signed-off-by: David S. Miller --- drivers/net/vrf.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/vrf.c b/drivers/net/vrf.c index 6d9130859c55..503e2fd7ce51 100644 --- a/drivers/net/vrf.c +++ b/drivers/net/vrf.c @@ -471,9 +471,8 @@ static netdev_tx_t vrf_process_v6_outbound(struct sk_buff *skb, skb_dst_drop(skb); - /* if dst.dev is loopback or the VRF device again this is locally - * originated traffic destined to a local address. Short circuit - * to Rx path + /* if dst.dev is the VRF device again this is locally originated traffic + * destined to a local address. Short circuit to Rx path. */ if (dst->dev == dev) return vrf_local_xmit(skb, dev, dst); @@ -547,9 +546,8 @@ static netdev_tx_t vrf_process_v4_outbound(struct sk_buff *skb, skb_dst_drop(skb); - /* if dst.dev is loopback or the VRF device again this is locally - * originated traffic destined to a local address. Short circuit - * to Rx path + /* if dst.dev is the VRF device again this is locally originated traffic + * destined to a local address. Short circuit to Rx path. */ if (rt->dst.dev == vrf_dev) return vrf_local_xmit(skb, vrf_dev, &rt->dst); -- cgit v1.2.3 From ab4d9913632b1e5ffcf3365783e98718b3c83c7f Mon Sep 17 00:00:00 2001 From: Zack Rusin Date: Thu, 14 Jan 2021 18:38:16 -0500 Subject: drm/vmwgfx: Make sure we unpin no longer needed buffers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We were not correctly unpinning no longer needed buffers. In particular vmw_buffer_object, which is internally often pinned on creation wasn't unpinned on destruction and none of the internal MOB buffers were unpinned before being put back. Technically this existed for a long time but commit 57fcd550eb15 ("drm/ttm: Warn on pinning without holding a reference") introduced a WARN_ON which was filling up the kernel logs rather quickly. Quite frankly internal usage of vmw_buffer_object and in general pinning needs to be refactored in vmwgfx but for now this makes it work. Signed-off-by: Zack Rusin Reviewed-by: Martin Krastev Reviewed-by: Roland Scheidegger Fixes: 57fcd550eb15 ("drm/ttm: Warn on pinning without holding a reference") Link: https://patchwork.freedesktop.org/patch/414984/?series=86052&rev=1 Cc: Huang Rui Cc: Christian König Cc: Daniel Vetter Cc: Christian Koenig Cc: dri-devel@lists.freedesktop.org --- drivers/gpu/drm/vmwgfx/vmwgfx_drv.h | 2 ++ drivers/gpu/drm/vmwgfx/vmwgfx_mob.c | 4 ++++ 2 files changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h index 5fa5bcd20cc5..336f5086ca26 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h @@ -1525,6 +1525,8 @@ static inline void vmw_bo_unreference(struct vmw_buffer_object **buf) *buf = NULL; if (tmp_buf != NULL) { + if (tmp_buf->base.pin_count > 0) + ttm_bo_unpin(&tmp_buf->base); ttm_bo_put(&tmp_buf->base); } } diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_mob.c b/drivers/gpu/drm/vmwgfx/vmwgfx_mob.c index a372980fe6a5..a0b53141dded 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_mob.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_mob.c @@ -277,6 +277,7 @@ out_no_setup: &batch->otables[i]); } + ttm_bo_unpin(batch->otable_bo); ttm_bo_put(batch->otable_bo); batch->otable_bo = NULL; return ret; @@ -342,6 +343,7 @@ static void vmw_otable_batch_takedown(struct vmw_private *dev_priv, vmw_bo_fence_single(bo, NULL); ttm_bo_unreserve(bo); + ttm_bo_unpin(batch->otable_bo); ttm_bo_put(batch->otable_bo); batch->otable_bo = NULL; } @@ -528,6 +530,7 @@ static void vmw_mob_pt_setup(struct vmw_mob *mob, void vmw_mob_destroy(struct vmw_mob *mob) { if (mob->pt_bo) { + ttm_bo_unpin(mob->pt_bo); ttm_bo_put(mob->pt_bo); mob->pt_bo = NULL; } @@ -643,6 +646,7 @@ int vmw_mob_bind(struct vmw_private *dev_priv, out_no_cmd_space: vmw_fifo_resource_dec(dev_priv); if (pt_set_up) { + ttm_bo_unpin(mob->pt_bo); ttm_bo_put(mob->pt_bo); mob->pt_bo = NULL; } -- cgit v1.2.3 From 68ce556bd1643498080af310d4544f46f3c4f3df Mon Sep 17 00:00:00 2001 From: Zack Rusin Date: Mon, 22 Mar 2021 12:54:57 -0400 Subject: drm/vmwgfx: Fix the lockdep breakage Thomas has noticed that the lockdep was broken in vmwgfx. It was broken during the pci initialization rework. This fixes the breakage by making sure we initialize the locking code before doing anything else. This was independently spotted and fixed by Tetsuo Handa as well. Reviewed-by: Martin Krastev Reviewed-by: Roland Scheidegger Cc: Tetsuo Handa Cc: dri-devel@lists.freedesktop.org Signed-off-by: Zack Rusin Fixes: 8772c0bb58bbf98a ("drm/vmwgfx: Cleanup pci resource allocation") Link: https://patchwork.freedesktop.org/patch/msgid/20210408172245.673785-1-zackr@vmware.com --- drivers/gpu/drm/vmwgfx/vmwgfx_drv.c | 17 ++++++++--------- drivers/gpu/drm/vmwgfx/vmwgfx_drv.h | 2 -- 2 files changed, 8 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c index dd69b51c40e4..6fa24645fbbf 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c @@ -712,17 +712,8 @@ static int vmw_driver_load(struct vmw_private *dev_priv, u32 pci_id) dev_priv->last_read_seqno = (uint32_t) -100; dev_priv->drm.dev_private = dev_priv; - ret = vmw_setup_pci_resources(dev_priv, pci_id); - if (ret) - return ret; - ret = vmw_detect_version(dev_priv); - if (ret) - goto out_no_pci_or_version; - mutex_init(&dev_priv->cmdbuf_mutex); - mutex_init(&dev_priv->release_mutex); mutex_init(&dev_priv->binding_mutex); - mutex_init(&dev_priv->global_kms_state_mutex); ttm_lock_init(&dev_priv->reservation_sem); spin_lock_init(&dev_priv->resource_lock); spin_lock_init(&dev_priv->hw_lock); @@ -730,6 +721,14 @@ static int vmw_driver_load(struct vmw_private *dev_priv, u32 pci_id) spin_lock_init(&dev_priv->cap_lock); spin_lock_init(&dev_priv->cursor_lock); + ret = vmw_setup_pci_resources(dev_priv, pci_id); + if (ret) + return ret; + ret = vmw_detect_version(dev_priv); + if (ret) + goto out_no_pci_or_version; + + for (i = vmw_res_context; i < vmw_res_max; ++i) { idr_init(&dev_priv->res_idr[i]); INIT_LIST_HEAD(&dev_priv->res_lru[i]); diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h index 336f5086ca26..8087a9013455 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h @@ -529,7 +529,6 @@ struct vmw_private { struct vmw_overlay *overlay_priv; struct drm_property *hotplug_mode_update_property; struct drm_property *implicit_placement_property; - struct mutex global_kms_state_mutex; spinlock_t cursor_lock; struct drm_atomic_state *suspend_state; @@ -592,7 +591,6 @@ struct vmw_private { bool refuse_hibernation; bool suspend_locked; - struct mutex release_mutex; atomic_t num_fifo_resources; /* -- cgit v1.2.3 From 2ef4fb92363c44e8a6f93fd0877b6a7dee6f874d Mon Sep 17 00:00:00 2001 From: Zack Rusin Date: Mon, 22 Mar 2021 13:04:11 -0400 Subject: drm/vmwgfx: Make sure bo's are unpinned before putting them back MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit During cotable resize we pin the backup buffer to make sure the trylock doesn't fail. We were never unpinning the backup buffer resulting in every subsequent cotable resize trying to release a pinned bo. After we copy the old backup to the new we can release the pin. Mob's are always pinned so we just have to make sure we unpin them before releasing them. Reviewed-by: Thomas Hellström (Intel) Fixes: d1a73c641afd ("drm/vmwgfx: Make sure we unpin no longer needed buffers") Link: https://patchwork.freedesktop.org/patch/msgid/20210413205938.788366-1-zackr@vmware.com Signed-off-by: Zack Rusin --- drivers/gpu/drm/vmwgfx/vmwgfx_cotable.c | 4 ++++ drivers/gpu/drm/vmwgfx/vmwgfx_drv.h | 5 +---- drivers/gpu/drm/vmwgfx/vmwgfx_mob.c | 18 ++++++++++++++---- 3 files changed, 19 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_cotable.c b/drivers/gpu/drm/vmwgfx/vmwgfx_cotable.c index ba658fa9cf6c..183571c387b7 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_cotable.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_cotable.c @@ -481,11 +481,15 @@ static int vmw_cotable_resize(struct vmw_resource *res, size_t new_size) vmw_bo_unreference(&old_buf); res->id = vcotbl->type; + /* Release the pin acquired in vmw_bo_init */ + ttm_bo_unpin(bo); + return 0; out_map_new: ttm_bo_kunmap(&old_map); out_wait: + ttm_bo_unpin(bo); ttm_bo_unreserve(bo); vmw_bo_unreference(&buf); diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h index 8087a9013455..eb76a6b9ebca 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h @@ -1522,11 +1522,8 @@ static inline void vmw_bo_unreference(struct vmw_buffer_object **buf) struct vmw_buffer_object *tmp_buf = *buf; *buf = NULL; - if (tmp_buf != NULL) { - if (tmp_buf->base.pin_count > 0) - ttm_bo_unpin(&tmp_buf->base); + if (tmp_buf != NULL) ttm_bo_put(&tmp_buf->base); - } } static inline struct vmw_buffer_object * diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_mob.c b/drivers/gpu/drm/vmwgfx/vmwgfx_mob.c index a0b53141dded..f2d625415458 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_mob.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_mob.c @@ -94,6 +94,16 @@ static void vmw_mob_pt_setup(struct vmw_mob *mob, struct vmw_piter data_iter, unsigned long num_data_pages); + +static inline void vmw_bo_unpin_unlocked(struct ttm_buffer_object *bo) +{ + int ret = ttm_bo_reserve(bo, false, true, NULL); + BUG_ON(ret != 0); + ttm_bo_unpin(bo); + ttm_bo_unreserve(bo); +} + + /* * vmw_setup_otable_base - Issue an object table base setup command to * the device @@ -277,7 +287,7 @@ out_no_setup: &batch->otables[i]); } - ttm_bo_unpin(batch->otable_bo); + vmw_bo_unpin_unlocked(batch->otable_bo); ttm_bo_put(batch->otable_bo); batch->otable_bo = NULL; return ret; @@ -341,9 +351,9 @@ static void vmw_otable_batch_takedown(struct vmw_private *dev_priv, BUG_ON(ret != 0); vmw_bo_fence_single(bo, NULL); + ttm_bo_unpin(bo); ttm_bo_unreserve(bo); - ttm_bo_unpin(batch->otable_bo); ttm_bo_put(batch->otable_bo); batch->otable_bo = NULL; } @@ -530,7 +540,7 @@ static void vmw_mob_pt_setup(struct vmw_mob *mob, void vmw_mob_destroy(struct vmw_mob *mob) { if (mob->pt_bo) { - ttm_bo_unpin(mob->pt_bo); + vmw_bo_unpin_unlocked(mob->pt_bo); ttm_bo_put(mob->pt_bo); mob->pt_bo = NULL; } @@ -646,7 +656,7 @@ int vmw_mob_bind(struct vmw_private *dev_priv, out_no_cmd_space: vmw_fifo_resource_dec(dev_priv); if (pt_set_up) { - ttm_bo_unpin(mob->pt_bo); + vmw_bo_unpin_unlocked(mob->pt_bo); ttm_bo_put(mob->pt_bo); mob->pt_bo = NULL; } -- cgit v1.2.3 From a714e27ea8bdee2b238748029d31472d0a65b611 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Wed, 14 Apr 2021 14:20:29 +0300 Subject: net: macb: fix the restore of cmp registers Commit a14d273ba159 ("net: macb: restore cmp registers on resume path") introduces the restore of CMP registers on resume path. In case the IP doesn't support type 2 screeners (zero on DCFG8 register) the struct macb::rx_fs_list::list is not initialized and thus the list_for_each_entry(item, &bp->rx_fs_list.list, list) loop introduced in commit a14d273ba159 ("net: macb: restore cmp registers on resume path") will access an uninitialized list leading to crash. Thus, initialize the struct macb::rx_fs_list::list without taking into account if the IP supports type 2 screeners or not. Fixes: a14d273ba159 ("net: macb: restore cmp registers on resume path") Signed-off-by: Claudiu Beznea Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c index 6e5cf490c01d..0f6a6cb7e98d 100644 --- a/drivers/net/ethernet/cadence/macb_main.c +++ b/drivers/net/ethernet/cadence/macb_main.c @@ -3918,6 +3918,7 @@ static int macb_init(struct platform_device *pdev) reg = gem_readl(bp, DCFG8); bp->max_tuples = min((GEM_BFEXT(SCR2CMP, reg) / 3), GEM_BFEXT(T2SCR, reg)); + INIT_LIST_HEAD(&bp->rx_fs_list.list); if (bp->max_tuples > 0) { /* also needs one ethtype match to check IPv4 */ if (GEM_BFEXT(SCR2ETH, reg) > 0) { @@ -3928,7 +3929,6 @@ static int macb_init(struct platform_device *pdev) /* Filtering is supported in hw but don't enable it in kernel now */ dev->hw_features |= NETIF_F_NTUPLE; /* init Rx flow definitions */ - INIT_LIST_HEAD(&bp->rx_fs_list.list); bp->rx_fs_list.count = 0; spin_lock_init(&bp->rx_fs_lock); } else -- cgit v1.2.3 From 416dcc5ce9d2a810477171c62ffa061a98f87367 Mon Sep 17 00:00:00 2001 From: Wan Jiabing Date: Wed, 14 Apr 2021 19:31:48 +0800 Subject: cavium/liquidio: Fix duplicate argument Fix the following coccicheck warning: ./drivers/net/ethernet/cavium/liquidio/cn66xx_regs.h:413:6-28: duplicated argument to & or | The CN6XXX_INTR_M1UPB0_ERR here is duplicate. Here should be CN6XXX_INTR_M1UNB0_ERR. Signed-off-by: Wan Jiabing Signed-off-by: David S. Miller --- drivers/net/ethernet/cavium/liquidio/cn66xx_regs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/cavium/liquidio/cn66xx_regs.h b/drivers/net/ethernet/cavium/liquidio/cn66xx_regs.h index b248966837b4..7aad40b2aa73 100644 --- a/drivers/net/ethernet/cavium/liquidio/cn66xx_regs.h +++ b/drivers/net/ethernet/cavium/liquidio/cn66xx_regs.h @@ -412,7 +412,7 @@ | CN6XXX_INTR_M0UNWI_ERR \ | CN6XXX_INTR_M1UPB0_ERR \ | CN6XXX_INTR_M1UPWI_ERR \ - | CN6XXX_INTR_M1UPB0_ERR \ + | CN6XXX_INTR_M1UNB0_ERR \ | CN6XXX_INTR_M1UNWI_ERR \ | CN6XXX_INTR_INSTR_DB_OF_ERR \ | CN6XXX_INTR_SLIST_DB_OF_ERR \ -- cgit v1.2.3 From 00423969d806d7169d16fa6314c570a472ca26c9 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Wed, 14 Apr 2021 17:10:07 +0200 Subject: Revert "net: stmmac: re-init rx buffers when mac resume back" This reverts commit 9c63faaa931e443e7abbbee9de0169f1d4710546, which introduces a suspend/resume regression on Jetson TX2 boards that can be reproduced every time. Given that the issue that this was supposed to fix only occurs very sporadically the safest course of action is to revert before v5.12 and then we can have another go at fixing the more rare issue in the next release (and perhaps backport it if necessary). The root cause of the observed problem seems to be that when the system is suspended, some packets are still in transit. When the descriptors for these buffers are cleared on resume, the descriptors become invalid and cause a fatal bus error. Link: https://lore.kernel.org/r/708edb92-a5df-ecc4-3126-5ab36707e275@nvidia.com/ Reported-by: Jonathan Hunter Signed-off-by: Thierry Reding Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 84 +---------------------- 1 file changed, 1 insertion(+), 83 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 208cae344ffa..4749bd0af160 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -1379,88 +1379,6 @@ static void stmmac_free_tx_buffer(struct stmmac_priv *priv, u32 queue, int i) } } -/** - * stmmac_reinit_rx_buffers - reinit the RX descriptor buffer. - * @priv: driver private structure - * Description: this function is called to re-allocate a receive buffer, perform - * the DMA mapping and init the descriptor. - */ -static void stmmac_reinit_rx_buffers(struct stmmac_priv *priv) -{ - u32 rx_count = priv->plat->rx_queues_to_use; - u32 queue; - int i; - - for (queue = 0; queue < rx_count; queue++) { - struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue]; - - for (i = 0; i < priv->dma_rx_size; i++) { - struct stmmac_rx_buffer *buf = &rx_q->buf_pool[i]; - - if (buf->page) { - page_pool_recycle_direct(rx_q->page_pool, buf->page); - buf->page = NULL; - } - - if (priv->sph && buf->sec_page) { - page_pool_recycle_direct(rx_q->page_pool, buf->sec_page); - buf->sec_page = NULL; - } - } - } - - for (queue = 0; queue < rx_count; queue++) { - struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue]; - - for (i = 0; i < priv->dma_rx_size; i++) { - struct stmmac_rx_buffer *buf = &rx_q->buf_pool[i]; - struct dma_desc *p; - - if (priv->extend_desc) - p = &((rx_q->dma_erx + i)->basic); - else - p = rx_q->dma_rx + i; - - if (!buf->page) { - buf->page = page_pool_dev_alloc_pages(rx_q->page_pool); - if (!buf->page) - goto err_reinit_rx_buffers; - - buf->addr = page_pool_get_dma_addr(buf->page); - } - - if (priv->sph && !buf->sec_page) { - buf->sec_page = page_pool_dev_alloc_pages(rx_q->page_pool); - if (!buf->sec_page) - goto err_reinit_rx_buffers; - - buf->sec_addr = page_pool_get_dma_addr(buf->sec_page); - } - - stmmac_set_desc_addr(priv, p, buf->addr); - if (priv->sph) - stmmac_set_desc_sec_addr(priv, p, buf->sec_addr, true); - else - stmmac_set_desc_sec_addr(priv, p, buf->sec_addr, false); - if (priv->dma_buf_sz == BUF_SIZE_16KiB) - stmmac_init_desc3(priv, p); - } - } - - return; - -err_reinit_rx_buffers: - do { - while (--i >= 0) - stmmac_free_rx_buffer(priv, queue, i); - - if (queue == 0) - break; - - i = priv->dma_rx_size; - } while (queue-- > 0); -} - /** * init_dma_rx_desc_rings - init the RX descriptor rings * @dev: net device structure @@ -5428,7 +5346,7 @@ int stmmac_resume(struct device *dev) mutex_lock(&priv->lock); stmmac_reset_queues_param(priv); - stmmac_reinit_rx_buffers(priv); + stmmac_free_tx_skbufs(priv); stmmac_clear_descriptors(priv); -- cgit v1.2.3 From 41bafb31dcd58d834bdffa5db703f94fd2cec727 Mon Sep 17 00:00:00 2001 From: Aya Levin Date: Mon, 12 Apr 2021 17:50:08 +0300 Subject: net/mlx5: Fix setting of devlink traps in switchdev mode Prevent setting of devlink traps on the uplink while in switchdev mode. In this mode, it is the SW switch responsibility to handle both packets with a mismatch in destination MAC or VLAN ID. Therefore, there are no flow steering tables to trap undesirable packets and driver crashes upon setting a trap. Fixes: 241dc159391f ("net/mlx5: Notify on trap action by blocking event") Signed-off-by: Aya Levin Reviewed-by: Moshe Shemesh Reviewed-by: Roi Dayan Reviewed-by: Tariq Toukan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/devlink.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/devlink.c b/drivers/net/ethernet/mellanox/mlx5/core/devlink.c index d7d8a68ef23d..d0f9d3cee97d 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/devlink.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/devlink.c @@ -246,6 +246,11 @@ static int mlx5_devlink_trap_action_set(struct devlink *devlink, struct mlx5_devlink_trap *dl_trap; int err = 0; + if (is_mdev_switchdev_mode(dev)) { + NL_SET_ERR_MSG_MOD(extack, "Devlink traps can't be set in switchdev mode"); + return -EOPNOTSUPP; + } + dl_trap = mlx5_find_trap_by_id(dev, trap->id); if (!dl_trap) { mlx5_core_err(dev, "Devlink trap: Set action on invalid trap id 0x%x", trap->id); -- cgit v1.2.3 From 7a320c9db3e73fb6c4f9a331087df9df18767221 Mon Sep 17 00:00:00 2001 From: Aya Levin Date: Sun, 11 Apr 2021 09:33:12 +0300 Subject: net/mlx5e: Fix setting of RS FEC mode Change register setting from bit number to bit mask. Fixes: b5ede32d3329 ("net/mlx5e: Add support for FEC modes based on 50G per lane links") Signed-off-by: Aya Levin Reviewed-by: Eran Ben Elisha Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en/port.c | 23 ++++------------------- 1 file changed, 4 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/port.c b/drivers/net/ethernet/mellanox/mlx5/core/en/port.c index 308fd279669e..89510cac46c2 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/port.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/port.c @@ -387,21 +387,6 @@ enum mlx5e_fec_supported_link_mode { *_policy = MLX5_GET(pplm_reg, _buf, fec_override_admin_##link); \ } while (0) -#define MLX5E_FEC_OVERRIDE_ADMIN_50G_POLICY(buf, policy, write, link) \ - do { \ - unsigned long policy_long; \ - u16 *__policy = &(policy); \ - bool _write = (write); \ - \ - policy_long = *__policy; \ - if (_write && *__policy) \ - *__policy = find_first_bit(&policy_long, \ - sizeof(policy_long) * BITS_PER_BYTE);\ - MLX5E_FEC_OVERRIDE_ADMIN_POLICY(buf, *__policy, _write, link); \ - if (!_write && *__policy) \ - *__policy = 1 << *__policy; \ - } while (0) - /* get/set FEC admin field for a given speed */ static int mlx5e_fec_admin_field(u32 *pplm, u16 *fec_policy, bool write, enum mlx5e_fec_supported_link_mode link_mode) @@ -423,16 +408,16 @@ static int mlx5e_fec_admin_field(u32 *pplm, u16 *fec_policy, bool write, MLX5E_FEC_OVERRIDE_ADMIN_POLICY(pplm, *fec_policy, write, 100g); break; case MLX5E_FEC_SUPPORTED_LINK_MODE_50G_1X: - MLX5E_FEC_OVERRIDE_ADMIN_50G_POLICY(pplm, *fec_policy, write, 50g_1x); + MLX5E_FEC_OVERRIDE_ADMIN_POLICY(pplm, *fec_policy, write, 50g_1x); break; case MLX5E_FEC_SUPPORTED_LINK_MODE_100G_2X: - MLX5E_FEC_OVERRIDE_ADMIN_50G_POLICY(pplm, *fec_policy, write, 100g_2x); + MLX5E_FEC_OVERRIDE_ADMIN_POLICY(pplm, *fec_policy, write, 100g_2x); break; case MLX5E_FEC_SUPPORTED_LINK_MODE_200G_4X: - MLX5E_FEC_OVERRIDE_ADMIN_50G_POLICY(pplm, *fec_policy, write, 200g_4x); + MLX5E_FEC_OVERRIDE_ADMIN_POLICY(pplm, *fec_policy, write, 200g_4x); break; case MLX5E_FEC_SUPPORTED_LINK_MODE_400G_8X: - MLX5E_FEC_OVERRIDE_ADMIN_50G_POLICY(pplm, *fec_policy, write, 400g_8x); + MLX5E_FEC_OVERRIDE_ADMIN_POLICY(pplm, *fec_policy, write, 400g_8x); break; default: return -EINVAL; -- cgit v1.2.3 From e3e0f9b279705154b951d579dc3d8b7041710e24 Mon Sep 17 00:00:00 2001 From: wenxu Date: Fri, 9 Apr 2021 13:33:48 +0800 Subject: net/mlx5e: fix ingress_ifindex check in mlx5e_flower_parse_meta In the nft_offload there is the mate flow_dissector with no ingress_ifindex but with ingress_iftype that only be used in the software. So if the mask of ingress_ifindex in meta is 0, this meta check should be bypass. Fixes: 6d65bc64e232 ("net/mlx5e: Add mlx5e_flower_parse_meta support") Signed-off-by: wenxu Acked-by: Pablo Neira Ayuso Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index df2a0af854bb..d675107d9eca 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -1895,6 +1895,9 @@ static int mlx5e_flower_parse_meta(struct net_device *filter_dev, return 0; flow_rule_match_meta(rule, &match); + if (!match.mask->ingress_ifindex) + return 0; + if (match.mask->ingress_ifindex != 0xFFFFFFFF) { NL_SET_ERR_MSG_MOD(extack, "Unsupported ingress ifindex mask"); return -EOPNOTSUPP; -- cgit v1.2.3 From 39930213e7779b9c4257499972b8afb8858f1a2d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marek=20Beh=C3=BAn?= Date: Thu, 8 Apr 2021 04:00:00 +0200 Subject: i2c: mv64xxx: Fix random system lock caused by runtime PM MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit I noticed a weird bug with this driver on Marvell CN9130 Customer Reference Board. Sometime after boot, the system locks with the following message: [104.071363] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 The system does not respond afterwards, only warns about RCU stalls. This first appeared with commit e5c02cf54154 ("i2c: mv64xxx: Add runtime PM support"). With further experimentation I discovered that adding a delay into mv64xxx_i2c_hw_init() fixes this issue. This function is called before every xfer, due to how runtime PM works in this driver. It seems that in order to work correctly, a delay is needed after the bus is reset in this function. Since there already is a known erratum with this controller needing a delay, I assume that this is just another place this needs to be applied. Therefore I apply the delay only if errata_delay is true. Signed-off-by: Marek Behún Acked-by: Gregory CLEMENT Reviewed-by: Samuel Holland Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-mv64xxx.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c index c590d36b5fd1..5c8e94b6cdb5 100644 --- a/drivers/i2c/busses/i2c-mv64xxx.c +++ b/drivers/i2c/busses/i2c-mv64xxx.c @@ -221,6 +221,10 @@ mv64xxx_i2c_hw_init(struct mv64xxx_i2c_data *drv_data) writel(0, drv_data->reg_base + drv_data->reg_offsets.ext_addr); writel(MV64XXX_I2C_REG_CONTROL_TWSIEN | MV64XXX_I2C_REG_CONTROL_STOP, drv_data->reg_base + drv_data->reg_offsets.control); + + if (drv_data->errata_delay) + udelay(5); + drv_data->state = MV64XXX_I2C_STATE_IDLE; } -- cgit v1.2.3 From 4e39a072a6a0fc422ba7da5e4336bdc295d70211 Mon Sep 17 00:00:00 2001 From: Jason Xing Date: Wed, 14 Apr 2021 10:34:28 +0800 Subject: i40e: fix the panic when running bpf in xdpdrv mode Fix this panic by adding more rules to calculate the value of @rss_size_max which could be used in allocating the queues when bpf is loaded, which, however, could cause the failure and then trigger the NULL pointer of vsi->rx_rings. Prio to this fix, the machine doesn't care about how many cpus are online and then allocates 256 queues on the machine with 32 cpus online actually. Once the load of bpf begins, the log will go like this "failed to get tracking for 256 queues for VSI 0 err -12" and this "setup of MAIN VSI failed". Thus, I attach the key information of the crash-log here. BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 RIP: 0010:i40e_xdp+0xdd/0x1b0 [i40e] Call Trace: [2160294.717292] ? i40e_reconfig_rss_queues+0x170/0x170 [i40e] [2160294.717666] dev_xdp_install+0x4f/0x70 [2160294.718036] dev_change_xdp_fd+0x11f/0x230 [2160294.718380] ? dev_disable_lro+0xe0/0xe0 [2160294.718705] do_setlink+0xac7/0xe70 [2160294.719035] ? __nla_parse+0xed/0x120 [2160294.719365] rtnl_newlink+0x73b/0x860 Fixes: 41c445ff0f48 ("i40e: main driver core") Co-developed-by: Shujin Li Signed-off-by: Shujin Li Signed-off-by: Jason Xing Reviewed-by: Jesse Brandeburg Acked-by: Jesper Dangaard Brouer Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/i40e/i40e_main.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 30ad7c08d0fb..527023ee4c07 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -12357,6 +12357,7 @@ static int i40e_sw_init(struct i40e_pf *pf) { int err = 0; int size; + u16 pow; /* Set default capability flags */ pf->flags = I40E_FLAG_RX_CSUM_ENABLED | @@ -12375,6 +12376,11 @@ static int i40e_sw_init(struct i40e_pf *pf) pf->rss_table_size = pf->hw.func_caps.rss_table_size; pf->rss_size_max = min_t(int, pf->rss_size_max, pf->hw.func_caps.num_tx_qp); + + /* find the next higher power-of-2 of num cpus */ + pow = roundup_pow_of_two(num_online_cpus()); + pf->rss_size_max = min_t(int, pf->rss_size_max, pow); + if (pf->hw.func_caps.rss) { pf->flags |= I40E_FLAG_RSS_ENABLED; pf->alloc_rss_size = min_t(int, pf->rss_size_max, -- cgit v1.2.3 From 1a73e427b824133940c2dd95ebe26b6dce1cbf10 Mon Sep 17 00:00:00 2001 From: Vinay Kumar Yadav Date: Thu, 15 Apr 2021 13:17:45 +0530 Subject: ch_ktls: Fix kernel panic Taking page refcount is not ideal and causes kernel panic sometimes. It's better to take tx_ctx lock for the complete skb transmit, to avoid page cleanup if ACK received in middle. Fixes: 5a4b9fe7fece ("cxgb4/chcr: complete record tx handling") Signed-off-by: Vinay Kumar Yadav Signed-off-by: Rohit Maheshwari Signed-off-by: David S. Miller --- .../chelsio/inline_crypto/ch_ktls/chcr_ktls.c | 24 +++++----------------- 1 file changed, 5 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c b/drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c index 1115b8f9ea4e..e39fa0940367 100644 --- a/drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c +++ b/drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c @@ -2010,12 +2010,11 @@ static int chcr_ktls_xmit(struct sk_buff *skb, struct net_device *dev) * we will send the complete record again. */ + spin_lock_irqsave(&tx_ctx->base.lock, flags); + do { - int i; cxgb4_reclaim_completed_tx(adap, &q->q, true); - /* lock taken */ - spin_lock_irqsave(&tx_ctx->base.lock, flags); /* fetch the tls record */ record = tls_get_record(&tx_ctx->base, tcp_seq, &tx_info->record_no); @@ -2074,11 +2073,11 @@ static int chcr_ktls_xmit(struct sk_buff *skb, struct net_device *dev) tls_end_offset, skb_offset, 0); - spin_unlock_irqrestore(&tx_ctx->base.lock, flags); if (ret) { /* free the refcount taken earlier */ if (tls_end_offset < data_len) dev_kfree_skb_any(skb); + spin_unlock_irqrestore(&tx_ctx->base.lock, flags); goto out; } @@ -2088,16 +2087,6 @@ static int chcr_ktls_xmit(struct sk_buff *skb, struct net_device *dev) continue; } - /* increase page reference count of the record, so that there - * won't be any chance of page free in middle if in case stack - * receives ACK and try to delete the record. - */ - for (i = 0; i < record->num_frags; i++) - __skb_frag_ref(&record->frags[i]); - /* lock cleared */ - spin_unlock_irqrestore(&tx_ctx->base.lock, flags); - - /* if a tls record is finishing in this SKB */ if (tls_end_offset <= data_len) { ret = chcr_end_part_handler(tx_info, skb, record, @@ -2122,13 +2111,9 @@ static int chcr_ktls_xmit(struct sk_buff *skb, struct net_device *dev) data_len = 0; } - /* clear the frag ref count which increased locally before */ - for (i = 0; i < record->num_frags; i++) { - /* clear the frag ref count */ - __skb_frag_unref(&record->frags[i]); - } /* if any failure, come out from the loop. */ if (ret) { + spin_unlock_irqrestore(&tx_ctx->base.lock, flags); if (th->fin) dev_kfree_skb_any(skb); @@ -2143,6 +2128,7 @@ static int chcr_ktls_xmit(struct sk_buff *skb, struct net_device *dev) } while (data_len > 0); + spin_unlock_irqrestore(&tx_ctx->base.lock, flags); atomic64_inc(&port_stats->ktls_tx_encrypted_packets); atomic64_add(skb_data_len, &port_stats->ktls_tx_encrypted_bytes); -- cgit v1.2.3 From bc16efd2430652f894ae34b1de5eccc3bf0d2810 Mon Sep 17 00:00:00 2001 From: Vinay Kumar Yadav Date: Thu, 15 Apr 2021 13:17:46 +0530 Subject: ch_ktls: fix device connection close When sge queue is full and chcr_ktls_xmit_wr_complete() returns failure, skb is not freed if it is not the last tls record in this skb, causes refcount never gets freed and tls_dev_del() never gets called on this connection. Fixes: 5a4b9fe7fece ("cxgb4/chcr: complete record tx handling") Signed-off-by: Vinay Kumar Yadav Signed-off-by: Rohit Maheshwari Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c b/drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c index e39fa0940367..a626560f8365 100644 --- a/drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c +++ b/drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c @@ -1735,7 +1735,9 @@ static int chcr_end_part_handler(struct chcr_ktls_info *tx_info, struct sge_eth_txq *q, u32 skb_offset, u32 tls_end_offset, bool last_wr) { + bool free_skb_if_tx_fails = false; struct sk_buff *nskb = NULL; + /* check if it is a complete record */ if (tls_end_offset == record->len) { nskb = skb; @@ -1758,6 +1760,8 @@ static int chcr_end_part_handler(struct chcr_ktls_info *tx_info, if (last_wr) dev_kfree_skb_any(skb); + else + free_skb_if_tx_fails = true; last_wr = true; @@ -1769,6 +1773,8 @@ static int chcr_end_part_handler(struct chcr_ktls_info *tx_info, record->num_frags, (last_wr && tcp_push_no_fin), mss)) { + if (free_skb_if_tx_fails) + dev_kfree_skb_any(skb); goto out; } tx_info->prev_seq = record->end_seq; -- cgit v1.2.3 From 21d8c25e3f4b9052a471ced8f47b531956eb9963 Mon Sep 17 00:00:00 2001 From: Vinay Kumar Yadav Date: Thu, 15 Apr 2021 13:17:47 +0530 Subject: ch_ktls: tcb close causes tls connection failure HW doesn't need marking TCB closed. This TCB state change sometimes causes problem to the new connection which gets the same tid. Fixes: 34aba2c45024 ("cxgb4/chcr : Register to tls add and del callback") Signed-off-by: Vinay Kumar Yadav Signed-off-by: Rohit Maheshwari Signed-off-by: David S. Miller --- .../chelsio/inline_crypto/ch_ktls/chcr_ktls.c | 19 ------------------- 1 file changed, 19 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c b/drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c index a626560f8365..8559eec161f0 100644 --- a/drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c +++ b/drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c @@ -349,18 +349,6 @@ static int chcr_set_tcb_field(struct chcr_ktls_info *tx_info, u16 word, return cxgb4_ofld_send(tx_info->netdev, skb); } -/* - * chcr_ktls_mark_tcb_close: mark tcb state to CLOSE - * @tx_info - driver specific tls info. - * return: NET_TX_OK/NET_XMIT_DROP. - */ -static int chcr_ktls_mark_tcb_close(struct chcr_ktls_info *tx_info) -{ - return chcr_set_tcb_field(tx_info, TCB_T_STATE_W, - TCB_T_STATE_V(TCB_T_STATE_M), - CHCR_TCB_STATE_CLOSED, 1); -} - /* * chcr_ktls_dev_del: call back for tls_dev_del. * Remove the tid and l2t entry and close the connection. @@ -395,8 +383,6 @@ static void chcr_ktls_dev_del(struct net_device *netdev, /* clear tid */ if (tx_info->tid != -1) { - /* clear tcb state and then release tid */ - chcr_ktls_mark_tcb_close(tx_info); cxgb4_remove_tid(&tx_info->adap->tids, tx_info->tx_chan, tx_info->tid, tx_info->ip_family); } @@ -574,7 +560,6 @@ static int chcr_ktls_dev_add(struct net_device *netdev, struct sock *sk, return 0; free_tid: - chcr_ktls_mark_tcb_close(tx_info); #if IS_ENABLED(CONFIG_IPV6) /* clear clip entry */ if (tx_info->ip_family == AF_INET6) @@ -672,10 +657,6 @@ static int chcr_ktls_cpl_act_open_rpl(struct adapter *adap, if (tx_info->pending_close) { spin_unlock(&tx_info->lock); if (!status) { - /* it's a late success, tcb status is established, - * mark it close. - */ - chcr_ktls_mark_tcb_close(tx_info); cxgb4_remove_tid(&tx_info->adap->tids, tx_info->tx_chan, tid, tx_info->ip_family); } -- cgit v1.2.3 From e8a4155567b3c903f49cbf89b8017e9cc22c4fe4 Mon Sep 17 00:00:00 2001 From: Vinay Kumar Yadav Date: Thu, 15 Apr 2021 13:17:48 +0530 Subject: ch_ktls: do not send snd_una update to TCB in middle snd_una update should not be done when the same skb is being sent out.chcr_short_record_handler() sends it again even though SND_UNA update is already sent for the skb in chcr_ktls_xmit(), which causes mismatch in un-acked TCP seq number, later causes problem in sending out complete record. Fixes: 429765a149f1 ("chcr: handle partial end part of a record") Signed-off-by: Vinay Kumar Yadav Signed-off-by: Rohit Maheshwari Signed-off-by: David S. Miller --- .../chelsio/inline_crypto/ch_ktls/chcr_ktls.c | 53 ---------------------- 1 file changed, 53 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c b/drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c index 8559eec161f0..a3f5b80888e5 100644 --- a/drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c +++ b/drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c @@ -1644,54 +1644,6 @@ static void chcr_ktls_copy_record_in_skb(struct sk_buff *nskb, refcount_add(nskb->truesize, &nskb->sk->sk_wmem_alloc); } -/* - * chcr_ktls_update_snd_una: Reset the SEND_UNA. It will be done to avoid - * sending the same segment again. It will discard the segment which is before - * the current tx max. - * @tx_info - driver specific tls info. - * @q - TX queue. - * return: NET_TX_OK/NET_XMIT_DROP. - */ -static int chcr_ktls_update_snd_una(struct chcr_ktls_info *tx_info, - struct sge_eth_txq *q) -{ - struct fw_ulptx_wr *wr; - unsigned int ndesc; - int credits; - void *pos; - u32 len; - - len = sizeof(*wr) + roundup(CHCR_SET_TCB_FIELD_LEN, 16); - ndesc = DIV_ROUND_UP(len, 64); - - credits = chcr_txq_avail(&q->q) - ndesc; - if (unlikely(credits < 0)) { - chcr_eth_txq_stop(q); - return NETDEV_TX_BUSY; - } - - pos = &q->q.desc[q->q.pidx]; - - wr = pos; - /* ULPTX wr */ - wr->op_to_compl = htonl(FW_WR_OP_V(FW_ULPTX_WR)); - wr->cookie = 0; - /* fill len in wr field */ - wr->flowid_len16 = htonl(FW_WR_LEN16_V(DIV_ROUND_UP(len, 16))); - - pos += sizeof(*wr); - - pos = chcr_write_cpl_set_tcb_ulp(tx_info, q, tx_info->tid, pos, - TCB_SND_UNA_RAW_W, - TCB_SND_UNA_RAW_V(TCB_SND_UNA_RAW_M), - TCB_SND_UNA_RAW_V(0), 0); - - chcr_txq_advance(&q->q, ndesc); - cxgb4_ring_tx_db(tx_info->adap, &q->q, ndesc); - - return 0; -} - /* * chcr_end_part_handler: This handler will handle the record which * is complete or if record's end part is received. T6 adapter has a issue that @@ -1892,11 +1844,6 @@ static int chcr_short_record_handler(struct chcr_ktls_info *tx_info, /* reset tcp_seq as per the prior_data_required len */ tcp_seq -= prior_data_len; } - /* reset snd una, so the middle record won't send the already - * sent part. - */ - if (chcr_ktls_update_snd_una(tx_info, q)) - goto out; atomic64_inc(&tx_info->adap->ch_ktls_stats.ktls_tx_middle_pkts); } else { atomic64_inc(&tx_info->adap->ch_ktls_stats.ktls_tx_start_pkts); -- cgit v1.2.3 From b21bb4cd1102dd9e24a169d09cf4e6f3c8a46bcf Mon Sep 17 00:00:00 2001 From: Ben Widawsky Date: Thu, 15 Apr 2021 16:26:08 -0700 Subject: cxl/mem: Fix register block offset calculation The "Register Offset Low" register of a "DVSEC Register Locator" contains the 64K aligned offset for the registers along with the BAR indicator and an id. The implementation was treating the "Register Block Offset Low" field a value rather than as a pre-aligned component of the 64-bit offset. So, just mask, don't mask and shift (FIELD_GET). The user visible result of this bug is that the driver fails to bind to the device after none of the required blocks are found. This was missed earlier because the primary development done in the QEMU environment only uses 0 offsets, i.e. 0 shifted is still 0. Fixes: 8adaf747c9f0 ("cxl/mem: Find device capabilities") Reported-by: Vishal Verma Signed-off-by: Ben Widawsky Link: https://lore.kernel.org/r/20210415232610.603273-1-ben.widawsky@intel.com Signed-off-by: Dan Williams --- drivers/cxl/mem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/cxl/mem.c b/drivers/cxl/mem.c index e3003f49b329..1b5078311f7d 100644 --- a/drivers/cxl/mem.c +++ b/drivers/cxl/mem.c @@ -998,7 +998,7 @@ static struct cxl_mem *cxl_mem_create(struct pci_dev *pdev, u32 reg_lo, return NULL; } - offset = ((u64)reg_hi << 32) | FIELD_GET(CXL_REGLOC_ADDR_MASK, reg_lo); + offset = ((u64)reg_hi << 32) | (reg_lo & CXL_REGLOC_ADDR_MASK); bar = FIELD_GET(CXL_REGLOC_BIR_MASK, reg_lo); /* Basic sanity check that BAR is big enough */ -- cgit v1.2.3 From 6b5b2a5bcfe9a250da19bac4ef7cabdc81d154ec Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Wed, 14 Apr 2021 16:48:12 +0800 Subject: drm/i915/gvt: Fix BDW command parser regression On BDW new Windows driver has brought extra registers to handle for LRM/LRR command in WA ctx. Add allowed registers in cmd parser for BDW. Cc: Alex Williamson Cc: Yan Zhao Cc: stable@vger.kernel.org Tested-by: Alex Williamson Reviewed-by: Colin Xu Fixes: 73a37a43d1b0 ("drm/i915/gvt: filter cmds "lrr-src" and "lrr-dst" in cmd_handler") Signed-off-by: Zhenyu Wang Link: http://patchwork.freedesktop.org/patch/msgid/20210414084813.3763353-1-zhenyuw@linux.intel.com --- drivers/gpu/drm/i915/gvt/cmd_parser.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/gvt/cmd_parser.c b/drivers/gpu/drm/i915/gvt/cmd_parser.c index fef1e857cefc..01c1d1b36acd 100644 --- a/drivers/gpu/drm/i915/gvt/cmd_parser.c +++ b/drivers/gpu/drm/i915/gvt/cmd_parser.c @@ -916,19 +916,26 @@ static int cmd_reg_handler(struct parser_exec_state *s, if (!strncmp(cmd, "srm", 3) || !strncmp(cmd, "lrm", 3)) { - if (offset != i915_mmio_reg_offset(GEN8_L3SQCREG4) && - offset != 0x21f0) { + if (offset == i915_mmio_reg_offset(GEN8_L3SQCREG4) || + offset == 0x21f0 || + (IS_BROADWELL(gvt->gt->i915) && + offset == i915_mmio_reg_offset(INSTPM))) + return 0; + else { gvt_vgpu_err("%s access to register (%x)\n", cmd, offset); return -EPERM; - } else - return 0; + } } if (!strncmp(cmd, "lrr-src", 7) || !strncmp(cmd, "lrr-dst", 7)) { - gvt_vgpu_err("not allowed cmd %s\n", cmd); - return -EPERM; + if (IS_BROADWELL(gvt->gt->i915) && offset == 0x215c) + return 0; + else { + gvt_vgpu_err("not allowed cmd %s reg (%x)\n", cmd, offset); + return -EPERM; + } } if (!strncmp(cmd, "pipe_ctrl", 9)) { -- cgit v1.2.3 From fae8817ae804a682c6823ad1672438f39fc46c28 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 16 Apr 2021 17:43:30 -0700 Subject: cxl/mem: Fix memory device capacity probing The CXL Identify Memory Device output payload emits capacity in 256MB units. The driver is treating the capacity field as bytes. This was missed because QEMU reports bytes when it should report bytes / 256MB. Fixes: 8adaf747c9f0 ("cxl/mem: Find device capabilities") Reviewed-by: Vishal Verma Cc: Ben Widawsky Link: https://lore.kernel.org/r/161862021044.3259705.7008520073059739760.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams --- drivers/cxl/mem.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/cxl/mem.c b/drivers/cxl/mem.c index 1b5078311f7d..2acc6173da36 100644 --- a/drivers/cxl/mem.c +++ b/drivers/cxl/mem.c @@ -4,6 +4,7 @@ #include #include #include +#include #include #include #include @@ -1419,6 +1420,7 @@ out: */ static int cxl_mem_identify(struct cxl_mem *cxlm) { + /* See CXL 2.0 Table 175 Identify Memory Device Output Payload */ struct cxl_mbox_identify { char fw_revision[0x10]; __le64 total_capacity; @@ -1447,10 +1449,11 @@ static int cxl_mem_identify(struct cxl_mem *cxlm) * For now, only the capacity is exported in sysfs */ cxlm->ram_range.start = 0; - cxlm->ram_range.end = le64_to_cpu(id.volatile_capacity) - 1; + cxlm->ram_range.end = le64_to_cpu(id.volatile_capacity) * SZ_256M - 1; cxlm->pmem_range.start = 0; - cxlm->pmem_range.end = le64_to_cpu(id.persistent_capacity) - 1; + cxlm->pmem_range.end = + le64_to_cpu(id.persistent_capacity) * SZ_256M - 1; memcpy(cxlm->firmware_version, id.fw_revision, sizeof(id.fw_revision)); -- cgit v1.2.3 From 7412dee9f1fd3e224202b633fdfa6eeaebe0307e Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Fri, 16 Apr 2021 11:43:47 +0200 Subject: mmc: meson-gx: replace WARN_ONCE with dev_warn_once about scatterlist size alignment in block mode Since commit e085b51c74cc ("mmc: meson-gx: check for scatterlist size alignment in block mode"), support for SDIO SD_IO_RW_EXTENDED transferts are properly filtered but some driver like brcmfmac still gives a block sg buffer size not aligned with SDIO block, triggerring a WARN_ONCE() with scary stacktrace even if the transfer works fine but with possible degraded performances. Simply replace with dev_warn_once() to inform user this should be fixed to avoid degraded performance. This should be ultimately fixed in brcmfmac, but since it's only a performance issue the warning should be removed. Fixes: e085b51c74cc ("mmc: meson-gx: check for scatterlist size alignment in block mode") Reported-by: Marek Szyprowski Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20210416094347.2015896-1-narmstrong@baylibre.com Signed-off-by: Ulf Hansson --- drivers/mmc/host/meson-gx-mmc.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c index eb6c02bc4a02..b8b771b643cc 100644 --- a/drivers/mmc/host/meson-gx-mmc.c +++ b/drivers/mmc/host/meson-gx-mmc.c @@ -247,8 +247,9 @@ static void meson_mmc_get_transfer_mode(struct mmc_host *mmc, */ for_each_sg(data->sg, sg, data->sg_len, i) { if (sg->length % data->blksz) { - WARN_ONCE(1, "unaligned sg len %u blksize %u\n", - sg->length, data->blksz); + dev_warn_once(mmc_dev(mmc), + "unaligned sg len %u blksize %u, disabling descriptor DMA for transfer\n", + sg->length, data->blksz); return; } } -- cgit v1.2.3 From d2b9935d65dab6e92beb33c150c1a6ded14ab670 Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Tue, 13 Apr 2021 02:24:12 +0300 Subject: drm/i915: Fix modesetting in case of unexpected AUX timeouts MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In case AUX failures happen unexpectedly during a modeset, the driver should still complete the modeset. In particular the driver should perform the link training sequence steps even in case of an AUX failure, as this sequence also includes port initialization steps. Not doing that can leave the port/pipe in a broken state and lead for instance to a flip done timeout. Fix this by continuing with link training (in a no-LTTPR mode) if the DPRX DPCD readout failed for some reason at the beginning of link training. After a successful connector detection we already have the DPCD read out and cached, so the failed repeated read for it should not cause a problem. Note that a partial AUX read could in theory partly overwrite the cached DPCD (and return error) but this overwrite should not happen if the returned values are corrupted (due to a timeout or some other IO error). Kudos to Ville to root cause the problem. Fixes: 7dffbdedb96a ("drm/i915: Disable LTTPR support when the DPCD rev < 1.4") References: https://gitlab.freedesktop.org/drm/intel/-/issues/3308 Cc: stable@vger.kernel.org # 5.11 Cc: Ville Syrjälä Signed-off-by: Imre Deak Reviewed-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20210412232413.2755054-1-imre.deak@intel.com (cherry picked from commit e42e7e585984b85b0fb9dd1fefc85ee4800ca629) Signed-off-by: Rodrigo Vivi [adjusted Fixes: tag] --- drivers/gpu/drm/i915/display/intel_dp_link_training.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/display/intel_dp_link_training.c b/drivers/gpu/drm/i915/display/intel_dp_link_training.c index be6ac0dd846e..2ed309534e97 100644 --- a/drivers/gpu/drm/i915/display/intel_dp_link_training.c +++ b/drivers/gpu/drm/i915/display/intel_dp_link_training.c @@ -848,7 +848,8 @@ void intel_dp_start_link_train(struct intel_dp *intel_dp, int lttpr_count = intel_dp_init_lttpr_and_dprx_caps(intel_dp); if (lttpr_count < 0) - return; + /* Still continue with enabling the port and link training. */ + lttpr_count = 0; if (!intel_dp_link_train_all_phys(intel_dp, crtc_state, lttpr_count)) intel_dp_schedule_fallback_link_training(intel_dp, crtc_state); -- cgit v1.2.3 From ddd8d94ca31e768c76cf8bfe34ba7b10136b3694 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Sat, 17 Apr 2021 11:38:39 +0300 Subject: gpio: omap: Save and restore sysconfig As we are using cpu_pm to save and restore context, we must also save and restore the GPIO sysconfig register. This is needed because we are not calling PM runtime functions at all with cpu_pm. We need to save the sysconfig on idle as it's value can get reconfigured by PM runtime and can be different from the init time value. Device specific flags like "ti,no-idle-on-init" can affect the init value. Fixes: b764a5863fd8 ("gpio: omap: Remove custom PM calls and use cpu_pm instead") Cc: Aaro Koskinen Cc: Adam Ford Cc: Andreas Kemnade Cc: Grygorii Strashko Cc: Peter Ujfalusi Signed-off-by: Tony Lindgren Acked-by: Grygorii Strashko Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-omap.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index 41952bb818ad..56152263ab38 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -29,6 +29,7 @@ #define OMAP4_GPIO_DEBOUNCINGTIME_MASK 0xFF struct gpio_regs { + u32 sysconfig; u32 irqenable1; u32 irqenable2; u32 wake_en; @@ -1069,6 +1070,7 @@ static void omap_gpio_init_context(struct gpio_bank *p) const struct omap_gpio_reg_offs *regs = p->regs; void __iomem *base = p->base; + p->context.sysconfig = readl_relaxed(base + regs->sysconfig); p->context.ctrl = readl_relaxed(base + regs->ctrl); p->context.oe = readl_relaxed(base + regs->direction); p->context.wake_en = readl_relaxed(base + regs->wkup_en); @@ -1088,6 +1090,7 @@ static void omap_gpio_restore_context(struct gpio_bank *bank) const struct omap_gpio_reg_offs *regs = bank->regs; void __iomem *base = bank->base; + writel_relaxed(bank->context.sysconfig, base + regs->sysconfig); writel_relaxed(bank->context.wake_en, base + regs->wkup_en); writel_relaxed(bank->context.ctrl, base + regs->ctrl); writel_relaxed(bank->context.leveldetect0, base + regs->leveldetect0); @@ -1115,6 +1118,10 @@ static void omap_gpio_idle(struct gpio_bank *bank, bool may_lose_context) bank->saved_datain = readl_relaxed(base + bank->regs->datain); + /* Save syconfig, it's runtime value can be different from init value */ + if (bank->loses_context) + bank->context.sysconfig = readl_relaxed(base + bank->regs->sysconfig); + if (!bank->enabled_non_wakeup_gpios) goto update_gpio_context_count; @@ -1279,6 +1286,7 @@ out_unlock: static const struct omap_gpio_reg_offs omap2_gpio_regs = { .revision = OMAP24XX_GPIO_REVISION, + .sysconfig = OMAP24XX_GPIO_SYSCONFIG, .direction = OMAP24XX_GPIO_OE, .datain = OMAP24XX_GPIO_DATAIN, .dataout = OMAP24XX_GPIO_DATAOUT, @@ -1302,6 +1310,7 @@ static const struct omap_gpio_reg_offs omap2_gpio_regs = { static const struct omap_gpio_reg_offs omap4_gpio_regs = { .revision = OMAP4_GPIO_REVISION, + .sysconfig = OMAP4_GPIO_SYSCONFIG, .direction = OMAP4_GPIO_OE, .datain = OMAP4_GPIO_DATAIN, .dataout = OMAP4_GPIO_DATAOUT, -- cgit v1.2.3 From d42a5b639d15622ece5b9dd12dafd9776efa2593 Mon Sep 17 00:00:00 2001 From: Philip Yang Date: Thu, 1 Apr 2021 00:22:23 -0400 Subject: drm/amdgpu: reserve fence slot to update page table MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Forgot to reserve a fence slot to use sdma to update page table, cause below kernel BUG backtrace to handle vm retry fault while application is exiting. [ 133.048143] kernel BUG at /home/yangp/git/compute_staging/kernel/drivers/dma-buf/dma-resv.c:281! [ 133.048487] Workqueue: events amdgpu_irq_handle_ih1 [amdgpu] [ 133.048506] RIP: 0010:dma_resv_add_shared_fence+0x204/0x280 [ 133.048672] amdgpu_vm_sdma_commit+0x134/0x220 [amdgpu] [ 133.048788] amdgpu_vm_bo_update_range+0x220/0x250 [amdgpu] [ 133.048905] amdgpu_vm_handle_fault+0x202/0x370 [amdgpu] [ 133.049031] gmc_v9_0_process_interrupt+0x1ab/0x310 [amdgpu] [ 133.049165] ? kgd2kfd_interrupt+0x9a/0x180 [amdgpu] [ 133.049289] ? amdgpu_irq_dispatch+0xb6/0x240 [amdgpu] [ 133.049408] amdgpu_irq_dispatch+0xb6/0x240 [amdgpu] [ 133.049534] amdgpu_ih_process+0x9b/0x1c0 [amdgpu] [ 133.049657] amdgpu_irq_handle_ih1+0x21/0x60 [amdgpu] [ 133.049669] process_one_work+0x29f/0x640 [ 133.049678] worker_thread+0x39/0x3f0 [ 133.049685] ? process_one_work+0x640/0x640 Signed-off-by: Philip Yang Signed-off-by: Felix Kuehling Reviewed-by: Christian König Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org # 5.11.x --- drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c index 7d2c8b169827..326dae31b675 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c @@ -3300,7 +3300,7 @@ bool amdgpu_vm_handle_fault(struct amdgpu_device *adev, u32 pasid, struct amdgpu_bo *root; uint64_t value, flags; struct amdgpu_vm *vm; - long r; + int r; spin_lock(&adev->vm_manager.pasid_lock); vm = idr_find(&adev->vm_manager.pasid_idr, pasid); @@ -3349,6 +3349,12 @@ bool amdgpu_vm_handle_fault(struct amdgpu_device *adev, u32 pasid, value = 0; } + r = dma_resv_reserve_shared(root->tbo.base.resv, 1); + if (r) { + pr_debug("failed %d to reserve fence slot\n", r); + goto error_unlock; + } + r = amdgpu_vm_bo_update_mapping(adev, adev, vm, true, false, NULL, addr, addr, flags, value, NULL, NULL, NULL); @@ -3360,7 +3366,7 @@ bool amdgpu_vm_handle_fault(struct amdgpu_device *adev, u32 pasid, error_unlock: amdgpu_bo_unreserve(root); if (r < 0) - DRM_ERROR("Can't handle page fault (%ld)\n", r); + DRM_ERROR("Can't handle page fault (%d)\n", r); error_unref: amdgpu_bo_unref(&root); -- cgit v1.2.3 From 6d638b3ffd27036c062d32cb4efd4be172c2a65e Mon Sep 17 00:00:00 2001 From: Qingqing Zhuo Date: Wed, 14 Apr 2021 19:00:01 -0400 Subject: drm/amd/display: Update modifier list for gfx10_3 [Why] Current list supports modifiers that have DCC_MAX_COMPRESSED_BLOCK set to AMD_FMT_MOD_DCC_BLOCK_128B, while AMD_FMT_MOD_DCC_BLOCK_64B is used instead by userspace. [How] Replace AMD_FMT_MOD_DCC_BLOCK_128B with AMD_FMT_MOD_DCC_BLOCK_64B for modifiers with DCC supported. Fixes: faa37f54ce0462 ("drm/amd/display: Expose modifiers") Signed-off-by: Qingqing Zhuo Reviewed-by: Bas Nieuwenhuizen Tested-by: Bas Nieuwenhuizen Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 573cf17262da..57e5900059ed 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -4296,7 +4296,7 @@ add_gfx10_3_modifiers(const struct amdgpu_device *adev, AMD_FMT_MOD_SET(DCC_CONSTANT_ENCODE, 1) | AMD_FMT_MOD_SET(DCC_INDEPENDENT_64B, 1) | AMD_FMT_MOD_SET(DCC_INDEPENDENT_128B, 1) | - AMD_FMT_MOD_SET(DCC_MAX_COMPRESSED_BLOCK, AMD_FMT_MOD_DCC_BLOCK_128B)); + AMD_FMT_MOD_SET(DCC_MAX_COMPRESSED_BLOCK, AMD_FMT_MOD_DCC_BLOCK_64B)); add_modifier(mods, size, capacity, AMD_FMT_MOD | AMD_FMT_MOD_SET(TILE, AMD_FMT_MOD_TILE_GFX9_64K_R_X) | @@ -4308,7 +4308,7 @@ add_gfx10_3_modifiers(const struct amdgpu_device *adev, AMD_FMT_MOD_SET(DCC_CONSTANT_ENCODE, 1) | AMD_FMT_MOD_SET(DCC_INDEPENDENT_64B, 1) | AMD_FMT_MOD_SET(DCC_INDEPENDENT_128B, 1) | - AMD_FMT_MOD_SET(DCC_MAX_COMPRESSED_BLOCK, AMD_FMT_MOD_DCC_BLOCK_128B)); + AMD_FMT_MOD_SET(DCC_MAX_COMPRESSED_BLOCK, AMD_FMT_MOD_DCC_BLOCK_64B)); add_modifier(mods, size, capacity, AMD_FMT_MOD | AMD_FMT_MOD_SET(TILE, AMD_FMT_MOD_TILE_GFX9_64K_R_X) | -- cgit v1.2.3 From 9ebb6bc0125dfb1e65a53eea4aeecc63d4d6ec2d Mon Sep 17 00:00:00 2001 From: Simon Ser Date: Fri, 26 Mar 2021 17:59:44 +0100 Subject: amd/display: allow non-linear multi-planar formats Accept non-linear buffers which use a multi-planar format, as long as they don't use DCC. Tested on GFX9 with NV12. Signed-off-by: Simon Ser Cc: Alex Deucher Cc: Harry Wentland Cc: Nicholas Kazlauskas Cc: Bas Nieuwenhuizen Reviewed-by: Bas Nieuwenhuizen Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 57e5900059ed..d699a5cf6c11 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -4071,13 +4071,6 @@ static bool dm_plane_format_mod_supported(struct drm_plane *plane, if (modifier == DRM_FORMAT_MOD_LINEAR) return true; - /* - * The arbitrary tiling support for multiplane formats has not been hooked - * up. - */ - if (info->num_planes > 1) - return false; - /* * For D swizzle the canonical modifier depends on the bpp, so check * it here. @@ -4096,6 +4089,10 @@ static bool dm_plane_format_mod_supported(struct drm_plane *plane, /* Per radeonsi comments 16/64 bpp are more complicated. */ if (info->cpp[0] != 4) return false; + /* We support multi-planar formats, but not when combined with + * additional DCC metadata planes. */ + if (info->num_planes > 1) + return false; } return true; -- cgit v1.2.3 From 24d034528ef06ad94cfcf4394beac0443ab1b16d Mon Sep 17 00:00:00 2001 From: Jiansong Chen Date: Mon, 19 Apr 2021 16:33:22 +0800 Subject: drm/amdgpu: fix GCR_GENERAL_CNTL offset for dimgrey_cavefish dimgrey_cavefish has similar gc_10_3 ip with sienna_cichlid, so follow its registers offset setting. Signed-off-by: Jiansong Chen Reviewed-by: Tao Zhou Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c index 45d1172b7bff..63691deb7df3 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c @@ -3280,7 +3280,7 @@ static const struct soc15_reg_golden golden_settings_gc_10_3_4[] = SOC15_REG_GOLDEN_VALUE(GC, 0, mmCPF_GCR_CNTL, 0x0007ffff, 0x0000c000), SOC15_REG_GOLDEN_VALUE(GC, 0, mmDB_DEBUG3, 0x00000280, 0x00000280), SOC15_REG_GOLDEN_VALUE(GC, 0, mmDB_DEBUG4, 0x07800000, 0x00800000), - SOC15_REG_GOLDEN_VALUE(GC, 0, mmGCR_GENERAL_CNTL, 0x00001d00, 0x00000500), + SOC15_REG_GOLDEN_VALUE(GC, 0, mmGCR_GENERAL_CNTL_Sienna_Cichlid, 0x00001d00, 0x00000500), SOC15_REG_GOLDEN_VALUE(GC, 0, mmGE_PC_CNTL, 0x003c0000, 0x00280400), SOC15_REG_GOLDEN_VALUE(GC, 0, mmGL2A_ADDR_MATCH_MASK, 0xffffffff, 0xffffffcf), SOC15_REG_GOLDEN_VALUE(GC, 0, mmGL2C_ADDR_MATCH_MASK, 0xffffffff, 0xffffffcf), -- cgit v1.2.3 From 482715ff0601c836152b792f06c353464d826b9b Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Thu, 15 Apr 2021 16:03:56 +0300 Subject: pinctrl: core: Show pin numbers for the controllers with base = 0 The commit f1b206cf7c57 ("pinctrl: core: print gpio in pins debugfs file") enabled GPIO pin number and label in debugfs for pin controller. However, it limited that feature to the chips where base is positive number. This, in particular, excluded chips where base is 0 for the historical or backward compatibility reasons. Refactor the code to include the latter as well. Fixes: f1b206cf7c57 ("pinctrl: core: print gpio in pins debugfs file") Cc: Drew Fustini Signed-off-by: Andy Shevchenko Tested-by: Drew Fustini Reviewed-by: Drew Fustini Link: https://lore.kernel.org/r/20210415130356.15885-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij --- drivers/pinctrl/core.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c index 7d3370289938..6e6825d17a1d 100644 --- a/drivers/pinctrl/core.c +++ b/drivers/pinctrl/core.c @@ -1604,8 +1604,8 @@ static int pinctrl_pins_show(struct seq_file *s, void *what) unsigned i, pin; #ifdef CONFIG_GPIOLIB struct pinctrl_gpio_range *range; - unsigned int gpio_num; struct gpio_chip *chip; + int gpio_num; #endif seq_printf(s, "registered pins: %d\n", pctldev->desc->npins); @@ -1625,7 +1625,7 @@ static int pinctrl_pins_show(struct seq_file *s, void *what) seq_printf(s, "pin %d (%s) ", pin, desc->name); #ifdef CONFIG_GPIOLIB - gpio_num = 0; + gpio_num = -1; list_for_each_entry(range, &pctldev->gpio_ranges, node) { if ((pin >= range->pin_base) && (pin < (range->pin_base + range->npins))) { @@ -1633,10 +1633,12 @@ static int pinctrl_pins_show(struct seq_file *s, void *what) break; } } - chip = gpio_to_chip(gpio_num); - if (chip && chip->gpiodev && chip->gpiodev->base) - seq_printf(s, "%u:%s ", gpio_num - - chip->gpiodev->base, chip->label); + if (gpio_num >= 0) + chip = gpio_to_chip(gpio_num); + else + chip = NULL; + if (chip) + seq_printf(s, "%u:%s ", gpio_num - chip->gpiodev->base, chip->label); else seq_puts(s, "0:? "); #endif -- cgit v1.2.3 From a9d064524fc3cf463b3bb14fa63de78aafb40dab Mon Sep 17 00:00:00 2001 From: Xie Yongji Date: Mon, 12 Apr 2021 17:55:12 +0800 Subject: vhost-vdpa: protect concurrent access to vhost device iotlb Protect vhost device iotlb by vhost_dev->mutex. Otherwise, it might cause corruption of the list and interval tree in struct vhost_iotlb if userspace sends the VHOST_IOTLB_MSG_V2 message concurrently. Fixes: 4c8cf318("vhost: introduce vDPA-based backend") Cc: stable@vger.kernel.org Signed-off-by: Xie Yongji Acked-by: Jason Wang Reviewed-by: Stefano Garzarella Link: https://lore.kernel.org/r/20210412095512.178-1-xieyongji@bytedance.com Signed-off-by: Michael S. Tsirkin --- drivers/vhost/vdpa.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/vhost/vdpa.c b/drivers/vhost/vdpa.c index e0a27e336293..bfa4c6ef554e 100644 --- a/drivers/vhost/vdpa.c +++ b/drivers/vhost/vdpa.c @@ -745,9 +745,11 @@ static int vhost_vdpa_process_iotlb_msg(struct vhost_dev *dev, const struct vdpa_config_ops *ops = vdpa->config; int r = 0; + mutex_lock(&dev->mutex); + r = vhost_dev_check_owner(dev); if (r) - return r; + goto unlock; switch (msg->type) { case VHOST_IOTLB_UPDATE: @@ -768,6 +770,8 @@ static int vhost_vdpa_process_iotlb_msg(struct vhost_dev *dev, r = -EINVAL; break; } +unlock: + mutex_unlock(&dev->mutex); return r; } -- cgit v1.2.3 From be286f84e33da1a7f83142b64dbd86f600e73363 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Sun, 11 Apr 2021 11:36:46 +0300 Subject: vdpa/mlx5: Set err = -ENOMEM in case dma_map_sg_attrs fails Set err = -ENOMEM if dma_map_sg_attrs() fails so the function reutrns error. Fixes: 94abbccdf291 ("vdpa/mlx5: Add shared memory registration code") Signed-off-by: Eli Cohen Reported-by: kernel test robot Reported-by: Dan Carpenter Link: https://lore.kernel.org/r/20210411083646.910546-1-elic@nvidia.com Signed-off-by: Michael S. Tsirkin Acked-by: Jason Wang Reviewed-by: Stefano Garzarella --- drivers/vdpa/mlx5/core/mr.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/vdpa/mlx5/core/mr.c b/drivers/vdpa/mlx5/core/mr.c index 3908ff28eec0..800cfd1967ad 100644 --- a/drivers/vdpa/mlx5/core/mr.c +++ b/drivers/vdpa/mlx5/core/mr.c @@ -278,8 +278,10 @@ done: mr->log_size = log_entity_size; mr->nsg = nsg; mr->nent = dma_map_sg_attrs(dma, mr->sg_head.sgl, mr->nsg, DMA_BIDIRECTIONAL, 0); - if (!mr->nent) + if (!mr->nent) { + err = -ENOMEM; goto err_map; + } err = create_direct_mr(mvdev, mr); if (err) -- cgit v1.2.3