From 89d1efc1fd0aceef8c668e8172aa470477b2784a Mon Sep 17 00:00:00 2001
From: Afzal Mohammed <afzal@ti.com>
Date: Sat, 29 Sep 2012 11:03:49 +0530
Subject: mtd: onenand: omap: cleanup gpmc dependency

requesting, freeing gpmc cs is now handled fully
by gpmc, remove left out gpmc dependency as well
as unnecessary include of gpmc.h

Signed-off-by: Afzal Mohammed <afzal@ti.com>
---
 drivers/mtd/onenand/omap2.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index 1961be985171..d7ef2c947daa 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -38,7 +38,6 @@
 #include <linux/regulator/consumer.h>
 
 #include <asm/mach/flash.h>
-#include <plat/gpmc.h>
 #include <linux/platform_data/mtd-onenand-omap2.h>
 #include <asm/gpio.h>
 
@@ -803,7 +802,6 @@ static int __devexit omap2_onenand_remove(struct platform_device *pdev)
 	}
 	iounmap(c->onenand.base);
 	release_mem_region(c->phys_base, c->mem_size);
-	gpmc_cs_free(c->gpmc_cs);
 	kfree(c);
 
 	return 0;
-- 
cgit v1.2.3


From 48b51d4dda3195320ec95b3393f44bfb060653c1 Mon Sep 17 00:00:00 2001
From: Afzal Mohammed <afzal@ti.com>
Date: Sat, 29 Sep 2012 11:14:47 +0530
Subject: mtd: nand: omap: free region as per resource size

memory as is now obtained via resource, upon freeing use
resource size. This also helps get rid of one macro.

Signed-off-by: Afzal Mohammed <afzal@ti.com>
---
 drivers/mtd/nand/omap2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 5b3138620646..4c331356a882 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -1513,7 +1513,7 @@ static int omap_nand_remove(struct platform_device *pdev)
 	/* Release NAND device, its internal structures and partitions */
 	nand_release(&info->mtd);
 	iounmap(info->nand.IO_ADDR_R);
-	release_mem_region(info->phys_base, NAND_IO_SIZE);
+	release_mem_region(info->phys_base, info->mem_size);
 	kfree(info);
 	return 0;
 }
-- 
cgit v1.2.3


From 4ea1e4ba7bec0a3d490a846376140643e4860536 Mon Sep 17 00:00:00 2001
From: Afzal Mohammed <afzal@ti.com>
Date: Sat, 29 Sep 2012 11:22:21 +0530
Subject: mtd: nand: omap: read nand using register address

Now that gpmc-nand registers are available in driver, use it
to read nand data.

"65b97cf  mtd: nand: omap2: handle nand on gpmc" modified all
other instances. After initial versions of that patch, a new
change added reading nand data using gpmc exposed function.
In the final version this change was not taken care.

Signed-off-by: Afzal Mohammed <afzal@ti.com>
---
 drivers/mtd/nand/omap2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 4c331356a882..abfc602c4cfc 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -996,7 +996,7 @@ static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip)
 		cond_resched();
 	}
 
-	status = gpmc_nand_read(info->gpmc_cs, GPMC_NAND_DATA);
+	status = readb(info->reg.gpmc_nand_data);
 	return status;
 }
 
-- 
cgit v1.2.3


From b7754452b3e27716347a528b47b0a1083af32520 Mon Sep 17 00:00:00 2001
From: Afzal Mohammed <afzal@ti.com>
Date: Fri, 5 Oct 2012 11:43:19 +0530
Subject: mtd: onenand: omap: use pdata info instead of cpu_is

platform data now contains a field to indicate whether
soc belongs to omap34xx family, use it instead of
cpu_is_* check.

This helps in removing dependency of platform specific
header file - cpu.h

Signed-off-by: Afzal Mohammed <afzal@ti.com>
---
 drivers/mtd/onenand/omap2.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index d7ef2c947daa..959f465a0aa1 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -42,7 +42,6 @@
 #include <asm/gpio.h>
 
 #include <plat/dma.h>
-#include <plat/cpu.h>
 
 #define DRIVER_NAME "omap2-onenand"
 
@@ -62,6 +61,7 @@ struct omap2_onenand {
 	int freq;
 	int (*setup)(void __iomem *base, int *freq_ptr);
 	struct regulator *regulator;
+	u8 flags;
 };
 
 static void omap2_onenand_dma_cb(int lch, u16 ch_status, void *data)
@@ -154,7 +154,7 @@ static int omap2_onenand_wait(struct mtd_info *mtd, int state)
 		if (!(syscfg & ONENAND_SYS_CFG1_IOBE)) {
 			syscfg |= ONENAND_SYS_CFG1_IOBE;
 			write_reg(c, syscfg, ONENAND_REG_SYS_CFG1);
-			if (cpu_is_omap34xx())
+			if (c->flags & ONENAND_IN_OMAP34XX)
 				/* Add a delay to let GPIO settle */
 				syscfg = read_reg(c, ONENAND_REG_SYS_CFG1);
 		}
@@ -638,6 +638,7 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev)
 
 	init_completion(&c->irq_done);
 	init_completion(&c->dma_done);
+	c->flags = pdata->flags;
 	c->gpmc_cs = pdata->cs;
 	c->gpio_irq = pdata->gpio_irq;
 	c->dma_channel = pdata->dma_channel;
@@ -728,7 +729,7 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev)
 	this = &c->onenand;
 	if (c->dma_channel >= 0) {
 		this->wait = omap2_onenand_wait;
-		if (cpu_is_omap34xx()) {
+		if (c->flags & ONENAND_IN_OMAP34XX) {
 			this->read_bufferram = omap3_onenand_read_bufferram;
 			this->write_bufferram = omap3_onenand_write_bufferram;
 		} else {
-- 
cgit v1.2.3


From 47f88af4ed80ac9ca593543e21ebf86a31d7e8ba Mon Sep 17 00:00:00 2001
From: Afzal Mohammed <afzal@ti.com>
Date: Sat, 29 Sep 2012 18:20:11 +0530
Subject: mtd: nand: omap: bring in gpmc nand macros

Bring onto driver the macros defined in gpmc.h that are
not necessary outside driver, helps in removing inclusion
of gpmc.h too. Also remove GPMC prefix on those macros to
make clear it's independence with gpmc header.

Signed-off-by: Afzal Mohammed <afzal@ti.com>
---
 drivers/mtd/nand/omap2.c | 21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index abfc602c4cfc..f0a1b1d69d32 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -110,6 +110,11 @@
 #define	ECC1RESULTSIZE			0x1
 #define	ECCCLEAR			0x100
 #define	ECC1				0x1
+#define	PREFETCH_FIFOTHRESHOLD_MAX	0x40
+#define	PREFETCH_FIFOTHRESHOLD(val)	((val) << 8)
+#define	PREFETCH_STATUS_COUNT(val)	(val & 0x00003fff)
+#define	PREFETCH_STATUS_FIFO_CNT(val)	((val >> 24) & 0x7F)
+#define	STATUS_BUFF_EMPTY		0x00000001
 
 /* oob info generated runtime depending on ecc algorithm and layout selected */
 static struct nand_ecclayout omap_oobinfo;
@@ -269,7 +274,7 @@ static void omap_write_buf8(struct mtd_info *mtd, const u_char *buf, int len)
 		/* wait until buffer is available for write */
 		do {
 			status = readl(info->reg.gpmc_status) &
-					GPMC_STATUS_BUFF_EMPTY;
+					STATUS_BUFF_EMPTY;
 		} while (!status);
 	}
 }
@@ -307,7 +312,7 @@ static void omap_write_buf16(struct mtd_info *mtd, const u_char * buf, int len)
 		/* wait until buffer is available for write */
 		do {
 			status = readl(info->reg.gpmc_status) &
-					GPMC_STATUS_BUFF_EMPTY;
+					STATUS_BUFF_EMPTY;
 		} while (!status);
 	}
 }
@@ -348,7 +353,7 @@ static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len)
 	} else {
 		do {
 			r_count = readl(info->reg.gpmc_prefetch_status);
-			r_count = GPMC_PREFETCH_STATUS_FIFO_CNT(r_count);
+			r_count = PREFETCH_STATUS_FIFO_CNT(r_count);
 			r_count = r_count >> 2;
 			ioread32_rep(info->nand.IO_ADDR_R, p, r_count);
 			p += r_count;
@@ -395,7 +400,7 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
 	} else {
 		while (len) {
 			w_count = readl(info->reg.gpmc_prefetch_status);
-			w_count = GPMC_PREFETCH_STATUS_FIFO_CNT(w_count);
+			w_count = PREFETCH_STATUS_FIFO_CNT(w_count);
 			w_count = w_count >> 1;
 			for (i = 0; (i < w_count) && len; i++, len -= 2)
 				iowrite16(*p++, info->nand.IO_ADDR_W);
@@ -407,7 +412,7 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
 		do {
 			cpu_relax();
 			val = readl(info->reg.gpmc_prefetch_status);
-			val = GPMC_PREFETCH_STATUS_COUNT(val);
+			val = PREFETCH_STATUS_COUNT(val);
 		} while (val && (tim++ < limit));
 
 		/* disable and stop the PFPW engine */
@@ -493,7 +498,7 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
 	do {
 		cpu_relax();
 		val = readl(info->reg.gpmc_prefetch_status);
-		val = GPMC_PREFETCH_STATUS_COUNT(val);
+		val = PREFETCH_STATUS_COUNT(val);
 	} while (val && (tim++ < limit));
 
 	/* disable and stop the PFPW engine */
@@ -556,7 +561,7 @@ static irqreturn_t omap_nand_irq(int this_irq, void *dev)
 	u32 bytes;
 
 	bytes = readl(info->reg.gpmc_prefetch_status);
-	bytes = GPMC_PREFETCH_STATUS_FIFO_CNT(bytes);
+	bytes = PREFETCH_STATUS_FIFO_CNT(bytes);
 	bytes = bytes  & 0xFFFC; /* io in multiple of 4 bytes */
 	if (info->iomode == OMAP_NAND_IO_WRITE) { /* checks for write io */
 		if (this_irq == info->gpmc_irq_count)
@@ -682,7 +687,7 @@ static void omap_write_buf_irq_pref(struct mtd_info *mtd,
 	limit = (loops_per_jiffy *  msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS));
 	do {
 		val = readl(info->reg.gpmc_prefetch_status);
-		val = GPMC_PREFETCH_STATUS_COUNT(val);
+		val = PREFETCH_STATUS_COUNT(val);
 		cpu_relax();
 	} while (val && (tim++ < limit));
 
-- 
cgit v1.2.3


From 2ef9f3ddec55f1b77615613d4aab418f073220bb Mon Sep 17 00:00:00 2001
From: Afzal Mohammed <afzal@ti.com>
Date: Thu, 4 Oct 2012 19:03:06 +0530
Subject: mtd: nand: omap: handle gpmc bch[48]

gpmc-nand bch registers are now available in driver,
make use of it to handle bch[48] instead of relying
on gpmc exported functions.

And so nand driver no longer needs gpmc header, remove it.

Signed-off-by: Afzal Mohammed <afzal@ti.com>
---
 drivers/mtd/nand/omap2.c | 100 +++++++++++++++++++++++++++++++++++++++++------
 1 file changed, 89 insertions(+), 11 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index f0a1b1d69d32..3282b151aa03 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -28,7 +28,6 @@
 #endif
 
 #include <plat/dma.h>
-#include <plat/gpmc.h>
 #include <linux/platform_data/mtd-nand-omap2.h>
 
 #define	DRIVER_NAME	"omap2-nand"
@@ -106,6 +105,7 @@
 #define	CS_MASK				0x7
 #define	ENABLE_PREFETCH			(0x1 << 7)
 #define	DMA_MPU_MODE_SHIFT		2
+#define	ECCSIZE0_SHIFT			12
 #define	ECCSIZE1_SHIFT			22
 #define	ECC1RESULTSIZE			0x1
 #define	ECCCLEAR			0x100
@@ -1034,19 +1034,45 @@ static int omap_dev_ready(struct mtd_info *mtd)
 static void omap3_enable_hwecc_bch(struct mtd_info *mtd, int mode)
 {
 	int nerrors;
-	unsigned int dev_width;
+	unsigned int dev_width, nsectors;
 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
 						   mtd);
 	struct nand_chip *chip = mtd->priv;
+	u32 val;
 
 	nerrors = (info->nand.ecc.bytes == 13) ? 8 : 4;
 	dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0;
+	nsectors = 1;
 	/*
 	 * Program GPMC to perform correction on one 512-byte sector at a time.
 	 * Using 4 sectors at a time (i.e. ecc.size = 2048) is also possible and
 	 * gives a slight (5%) performance gain (but requires additional code).
 	 */
-	(void)gpmc_enable_hwecc_bch(info->gpmc_cs, mode, dev_width, 1, nerrors);
+
+	writel(ECC1, info->reg.gpmc_ecc_control);
+
+	/*
+	 * When using BCH, sector size is hardcoded to 512 bytes.
+	 * Here we are using wrapping mode 6 both for reading and writing, with:
+	 *  size0 = 0  (no additional protected byte in spare area)
+	 *  size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area)
+	 */
+	val = (32 << ECCSIZE1_SHIFT) | (0 << ECCSIZE0_SHIFT);
+	writel(val, info->reg.gpmc_ecc_size_config);
+
+	/* BCH configuration */
+	val = ((1                        << 16) | /* enable BCH */
+	       (((nerrors == 8) ? 1 : 0) << 12) | /* 8 or 4 bits */
+	       (0x06                     <<  8) | /* wrap mode = 6 */
+	       (dev_width                <<  7) | /* bus width */
+	       (((nsectors-1) & 0x7)     <<  4) | /* number of sectors */
+	       (info->gpmc_cs            <<  1) | /* ECC CS */
+	       (0x1));                            /* enable ECC */
+
+	writel(val, info->reg.gpmc_ecc_config);
+
+	/* clear ecc and enable bits */
+	writel(ECCCLEAR | ECC1, info->reg.gpmc_ecc_control);
 }
 
 /**
@@ -1060,7 +1086,32 @@ static int omap3_calculate_ecc_bch4(struct mtd_info *mtd, const u_char *dat,
 {
 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
 						   mtd);
-	return gpmc_calculate_ecc_bch4(info->gpmc_cs, dat, ecc_code);
+	unsigned long nsectors, val1, val2;
+	int i;
+
+	nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1;
+
+	for (i = 0; i < nsectors; i++) {
+
+		/* Read hw-computed remainder */
+		val1 = readl(info->reg.gpmc_bch_result0[i]);
+		val2 = readl(info->reg.gpmc_bch_result1[i]);
+
+		/*
+		 * Add constant polynomial to remainder, in order to get an ecc
+		 * sequence of 0xFFs for a buffer filled with 0xFFs; and
+		 * left-justify the resulting polynomial.
+		 */
+		*ecc_code++ = 0x28 ^ ((val2 >> 12) & 0xFF);
+		*ecc_code++ = 0x13 ^ ((val2 >>  4) & 0xFF);
+		*ecc_code++ = 0xcc ^ (((val2 & 0xF) << 4)|((val1 >> 28) & 0xF));
+		*ecc_code++ = 0x39 ^ ((val1 >> 20) & 0xFF);
+		*ecc_code++ = 0x96 ^ ((val1 >> 12) & 0xFF);
+		*ecc_code++ = 0xac ^ ((val1 >> 4) & 0xFF);
+		*ecc_code++ = 0x7f ^ ((val1 & 0xF) << 4);
+	}
+
+	return 0;
 }
 
 /**
@@ -1074,7 +1125,39 @@ static int omap3_calculate_ecc_bch8(struct mtd_info *mtd, const u_char *dat,
 {
 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
 						   mtd);
-	return gpmc_calculate_ecc_bch8(info->gpmc_cs, dat, ecc_code);
+	unsigned long nsectors, val1, val2, val3, val4;
+	int i;
+
+	nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1;
+
+	for (i = 0; i < nsectors; i++) {
+
+		/* Read hw-computed remainder */
+		val1 = readl(info->reg.gpmc_bch_result0[i]);
+		val2 = readl(info->reg.gpmc_bch_result1[i]);
+		val3 = readl(info->reg.gpmc_bch_result2[i]);
+		val4 = readl(info->reg.gpmc_bch_result3[i]);
+
+		/*
+		 * Add constant polynomial to remainder, in order to get an ecc
+		 * sequence of 0xFFs for a buffer filled with 0xFFs.
+		 */
+		*ecc_code++ = 0xef ^ (val4 & 0xFF);
+		*ecc_code++ = 0x51 ^ ((val3 >> 24) & 0xFF);
+		*ecc_code++ = 0x2e ^ ((val3 >> 16) & 0xFF);
+		*ecc_code++ = 0x09 ^ ((val3 >> 8) & 0xFF);
+		*ecc_code++ = 0xed ^ (val3 & 0xFF);
+		*ecc_code++ = 0x93 ^ ((val2 >> 24) & 0xFF);
+		*ecc_code++ = 0x9a ^ ((val2 >> 16) & 0xFF);
+		*ecc_code++ = 0xc2 ^ ((val2 >> 8) & 0xFF);
+		*ecc_code++ = 0x97 ^ (val2 & 0xFF);
+		*ecc_code++ = 0x79 ^ ((val1 >> 24) & 0xFF);
+		*ecc_code++ = 0xe5 ^ ((val1 >> 16) & 0xFF);
+		*ecc_code++ = 0x24 ^ ((val1 >> 8) & 0xFF);
+		*ecc_code++ = 0xb5 ^ (val1 & 0xFF);
+	}
+
+	return 0;
 }
 
 /**
@@ -1130,7 +1213,7 @@ static void omap3_free_bch(struct mtd_info *mtd)
  */
 static int omap3_init_bch(struct mtd_info *mtd, int ecc_opt)
 {
-	int ret, max_errors;
+	int max_errors;
 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
 						   mtd);
 #ifdef CONFIG_MTD_NAND_OMAP_BCH8
@@ -1147,11 +1230,6 @@ static int omap3_init_bch(struct mtd_info *mtd, int ecc_opt)
 		goto fail;
 	}
 
-	/* initialize GPMC BCH engine */
-	ret = gpmc_init_hwecc_bch(info->gpmc_cs, 1, max_errors);
-	if (ret)
-		goto fail;
-
 	/* software bch library is only used to detect and locate errors */
 	info->bch = init_bch(13, max_errors, 0x201b /* hw polynomial */);
 	if (!info->bch)
-- 
cgit v1.2.3


From 68f39e74fbc3e58ad52d008072bddacc9eee1c7e Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 15 Oct 2012 12:09:43 -0700
Subject: ARM: OMAP: Split plat/mmc.h into local headers and platform_data

We need to remove this from plat for ARM common zImage
support.

Also remove includes not needed by the omap_hsmmc.c driver.

Cc: linux-mmc@vger.kernel.org
Acked-by: Chris Ball <cjb@laptop.org>
Acked-by: Venkatraman S <svenkatr@ti.com>
[tony@atomide.com: fold in removal of unused driver includes]
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/mmc/host/omap.c       | 3 ++-
 drivers/mmc/host/omap_hsmmc.c | 4 +---
 2 files changed, 3 insertions(+), 4 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index 48ad361613ef..e7c61b9b044c 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -28,8 +28,9 @@
 #include <linux/clk.h>
 #include <linux/scatterlist.h>
 #include <linux/slab.h>
+#include <linux/platform_data/mmc-omap.h>
 
-#include <plat/mmc.h>
+#include <plat/cpu.h>
 #include <plat/dma.h>
 
 #define	OMAP_MMC_REG_CMD	0x00
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 54bfd0cc106b..9b24bd46aad3 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -38,9 +38,7 @@
 #include <linux/gpio.h>
 #include <linux/regulator/consumer.h>
 #include <linux/pm_runtime.h>
-#include <mach/hardware.h>
-#include <plat/mmc.h>
-#include <plat/cpu.h>
+#include <linux/platform_data/mmc-omap.h>
 
 /* OMAP HSMMC Host Controller Registers */
 #define OMAP_HSMMC_SYSSTATUS	0x0014
-- 
cgit v1.2.3


From 53db20d123f7a1bf44e46b727775403672655fde Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 15 Oct 2012 12:10:33 -0700
Subject: mmc: omap: Remove cpu_is_omap usage from the driver

This is needed for the ARM common zImage support.

We can use the existing slot features to pass omap1
specific options to the driver. For omap2 we don't
want to pass anything new as that will be eventually
moved to use device tree based init.

Note that this patch depends on earlier patch that
moves plat/mmc.h into include/linux/platform_data.

Cc: linux-mmc@vger.kernel.org
Cc: Venkatraman S <svenkatr@ti.com>
Acked-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/mmc/host/omap.c | 23 +++++++++++++++--------
 1 file changed, 15 insertions(+), 8 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index e7c61b9b044c..9f0e26fffaea 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -30,7 +30,6 @@
 #include <linux/slab.h>
 #include <linux/platform_data/mmc-omap.h>
 
-#include <plat/cpu.h>
 #include <plat/dma.h>
 
 #define	OMAP_MMC_REG_CMD	0x00
@@ -73,6 +72,13 @@
 #define	OMAP_MMC_STAT_CARD_BUSY		(1 <<  2)
 #define	OMAP_MMC_STAT_END_OF_CMD	(1 <<  0)
 
+#define mmc_omap7xx()	(host->features & MMC_OMAP7XX)
+#define mmc_omap15xx()	(host->features & MMC_OMAP15XX)
+#define mmc_omap16xx()	(host->features & MMC_OMAP16XX)
+#define MMC_OMAP1_MASK	(MMC_OMAP7XX | MMC_OMAP15XX | MMC_OMAP16XX)
+#define mmc_omap1()	(host->features & MMC_OMAP1_MASK)
+#define mmc_omap2()	(!mmc_omap1())
+
 #define OMAP_MMC_REG(host, reg)		(OMAP_MMC_REG_##reg << (host)->reg_shift)
 #define OMAP_MMC_READ(host, reg)	__raw_readw((host)->virt_base + OMAP_MMC_REG(host, reg))
 #define OMAP_MMC_WRITE(host, reg, val)	__raw_writew((val), (host)->virt_base + OMAP_MMC_REG(host, reg))
@@ -148,6 +154,7 @@ struct mmc_omap_host {
 	u32			buffer_bytes_left;
 	u32			total_bytes_left;
 
+	unsigned		features;
 	unsigned		use_dma:1;
 	unsigned		brs_received:1, dma_done:1;
 	unsigned		dma_in_use:1;
@@ -989,7 +996,7 @@ mmc_omap_prepare_data(struct mmc_omap_host *host, struct mmc_request *req)
 		 * blocksize is at least that large. Blocksize is
 		 * usually 512 bytes; but not for some SD reads.
 		 */
-		burst = cpu_is_omap15xx() ? 32 : 64;
+		burst = mmc_omap15xx() ? 32 : 64;
 		if (burst > data->blksz)
 			burst = data->blksz;
 
@@ -1105,8 +1112,7 @@ static void mmc_omap_set_power(struct mmc_omap_slot *slot, int power_on,
 	if (slot->pdata->set_power != NULL)
 		slot->pdata->set_power(mmc_dev(slot->mmc), slot->id, power_on,
 					vdd);
-
-	if (cpu_is_omap24xx()) {
+	if (mmc_omap2()) {
 		u16 w;
 
 		if (power_on) {
@@ -1240,7 +1246,7 @@ static int __devinit mmc_omap_new_slot(struct mmc_omap_host *host, int id)
 	mmc->ops = &mmc_omap_ops;
 	mmc->f_min = 400000;
 
-	if (cpu_class_is_omap2())
+	if (mmc_omap2())
 		mmc->f_max = 48000000;
 	else
 		mmc->f_max = 24000000;
@@ -1360,6 +1366,7 @@ static int __devinit mmc_omap_probe(struct platform_device *pdev)
 	init_waitqueue_head(&host->slot_wq);
 
 	host->pdata = pdata;
+	host->features = host->pdata->slots[0].features;
 	host->dev = &pdev->dev;
 	platform_set_drvdata(pdev, host);
 
@@ -1392,7 +1399,7 @@ static int __devinit mmc_omap_probe(struct platform_device *pdev)
 	host->dma_tx_burst = -1;
 	host->dma_rx_burst = -1;
 
-	if (cpu_is_omap24xx())
+	if (mmc_omap2())
 		sig = host->id == 0 ? OMAP24XX_DMA_MMC1_TX : OMAP24XX_DMA_MMC2_TX;
 	else
 		sig = host->id == 0 ? OMAP_DMA_MMC_TX : OMAP_DMA_MMC2_TX;
@@ -1408,7 +1415,7 @@ static int __devinit mmc_omap_probe(struct platform_device *pdev)
 		dev_warn(host->dev, "unable to obtain TX DMA engine channel %u\n",
 			sig);
 #endif
-	if (cpu_is_omap24xx())
+	if (mmc_omap2())
 		sig = host->id == 0 ? OMAP24XX_DMA_MMC1_RX : OMAP24XX_DMA_MMC2_RX;
 	else
 		sig = host->id == 0 ? OMAP_DMA_MMC_RX : OMAP_DMA_MMC2_RX;
@@ -1436,7 +1443,7 @@ static int __devinit mmc_omap_probe(struct platform_device *pdev)
 	}
 
 	host->nr_slots = pdata->nr_slots;
-	host->reg_shift = (cpu_is_omap7xx() ? 1 : 2);
+	host->reg_shift = (mmc_omap7xx() ? 1 : 2);
 
 	host->mmc_omap_wq = alloc_workqueue("mmc_omap", 0, 0);
 	if (!host->mmc_omap_wq)
-- 
cgit v1.2.3


From 7bd3b61853da6d2fc579e27c7a1ac1e9fc968d1a Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 15 Oct 2012 13:53:41 -0700
Subject: ARM: OMAP2: Move plat/menelaus.h to linux/mfd/menelaus.h

We can move menelaus.h to live with other mfd headers to
get it out of plat for ARM common zImage support.

Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/mfd/menelaus.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/mfd/menelaus.c b/drivers/mfd/menelaus.c
index 55d589981412..998ce8cb3065 100644
--- a/drivers/mfd/menelaus.c
+++ b/drivers/mfd/menelaus.c
@@ -41,11 +41,11 @@
 #include <linux/rtc.h>
 #include <linux/bcd.h>
 #include <linux/slab.h>
+#include <linux/mfd/menelaus.h>
 
 #include <asm/mach/irq.h>
 
 #include <asm/gpio.h>
-#include <plat/menelaus.h>
 
 #define DRIVER_NAME			"menelaus"
 
-- 
cgit v1.2.3


From 8c4cc00552664d0be259388f2b1a49036c3757fa Mon Sep 17 00:00:00 2001
From: Lokesh Vutla <lokeshvutla@ti.com>
Date: Mon, 15 Oct 2012 14:01:01 -0700
Subject: ARM: OMAP1: DMA: Moving OMAP1 DMA channel definitions to mach-omap1

Some of the omap1 dma channel definitions are used by some drivers.
For moving omap1 dma channel definitions to mach-omap1/, the used
ones should be defined locally to driver. Driver can eliminate it
by using DT, platform data, or IORESOURCE_DMA.
And moving OMAP1 DMA channel definitions to mach-omap1

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/media/platform/omap/omap_vout_vrfb.c     | 2 ++
 drivers/media/platform/soc_camera/omap1_camera.c | 1 +
 drivers/mmc/host/omap.c                          | 4 ++++
 drivers/usb/gadget/omap_udc.c                    | 2 ++
 4 files changed, 9 insertions(+)

(limited to 'drivers')

diff --git a/drivers/media/platform/omap/omap_vout_vrfb.c b/drivers/media/platform/omap/omap_vout_vrfb.c
index 4be26abf6cea..11d7a29b9708 100644
--- a/drivers/media/platform/omap/omap_vout_vrfb.c
+++ b/drivers/media/platform/omap/omap_vout_vrfb.c
@@ -22,6 +22,8 @@
 #include "omap_voutdef.h"
 #include "omap_voutlib.h"
 
+#define OMAP_DMA_NO_DEVICE	0
+
 /*
  * Function for allocating video buffers
  */
diff --git a/drivers/media/platform/soc_camera/omap1_camera.c b/drivers/media/platform/soc_camera/omap1_camera.c
index fa08c7695ccb..3046dba91006 100644
--- a/drivers/media/platform/soc_camera/omap1_camera.c
+++ b/drivers/media/platform/soc_camera/omap1_camera.c
@@ -40,6 +40,7 @@
 #define DRIVER_NAME		"omap1-camera"
 #define DRIVER_VERSION		"0.0.2"
 
+#define OMAP_DMA_CAMERA_IF_RX		20
 
 /*
  * ---------------------------------------------------------------------------
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index 48ad361613ef..b2cf37b0ee30 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -84,6 +84,10 @@
 #define OMAP_MMC_CMDTYPE_AC	2
 #define OMAP_MMC_CMDTYPE_ADTC	3
 
+#define OMAP_DMA_MMC_TX		21
+#define OMAP_DMA_MMC_RX		22
+#define OMAP_DMA_MMC2_TX	54
+#define OMAP_DMA_MMC2_RX	55
 
 #define DRIVER_NAME "mmci-omap"
 
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 2a4749c3eb3f..024c0b9150bb 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -61,6 +61,8 @@
 #define	DRIVER_DESC	"OMAP UDC driver"
 #define	DRIVER_VERSION	"4 October 2004"
 
+#define OMAP_DMA_USB_W2FC_TX0		29
+
 /*
  * The OMAP UDC needs _very_ early endpoint setup:  before enabling the
  * D+ pullup to allow enumeration.  That's too early for the gadget
-- 
cgit v1.2.3


From d5e7c864f386306587f7f43ed22d48ef7e4050d6 Mon Sep 17 00:00:00 2001
From: Lokesh Vutla <lokeshvutla@ti.com>
Date: Mon, 15 Oct 2012 14:03:51 -0700
Subject: ARM: OMAP2+: DMA: Moving OMAP2+ DMA channel definitions to mach-omap2

Similar to omap1, some of the omap2+ dma channel definitions are
used by some drivers. For moving omap2+ dma channel definitions
to mach-omap2/, the used ones should be defined locally to driver.
Drivers can eliminate it using DT, platform data, or IORESOURCE_DMA
And moving omap2+ DMA channel definitions to mach-omap2

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/media/platform/omap3isp/isphist.c | 2 ++
 drivers/mmc/host/omap.c                   | 6 ++++++
 drivers/mtd/nand/omap2.c                  | 2 ++
 drivers/usb/musb/tusb6010_omap.c          | 7 +++++++
 4 files changed, 17 insertions(+)

(limited to 'drivers')

diff --git a/drivers/media/platform/omap3isp/isphist.c b/drivers/media/platform/omap3isp/isphist.c
index d1a8dee5e1ca..e7f9c4292cc6 100644
--- a/drivers/media/platform/omap3isp/isphist.c
+++ b/drivers/media/platform/omap3isp/isphist.c
@@ -34,6 +34,8 @@
 #include "ispreg.h"
 #include "isphist.h"
 
+#define OMAP24XX_DMA_NO_DEVICE		0
+
 #define HIST_CONFIG_DMA	1
 
 #define HIST_USING_DMA(hist) ((hist)->dma_ch >= 0)
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index b2cf37b0ee30..9664fa964760 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -89,6 +89,12 @@
 #define OMAP_DMA_MMC2_TX	54
 #define OMAP_DMA_MMC2_RX	55
 
+#define OMAP24XX_DMA_MMC2_TX	47
+#define OMAP24XX_DMA_MMC2_RX	48
+#define OMAP24XX_DMA_MMC1_TX	61
+#define OMAP24XX_DMA_MMC1_RX	62
+
+
 #define DRIVER_NAME "mmci-omap"
 
 /* Specifies how often in millisecs to poll for card status changes
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 5b3138620646..3105f22993cd 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -111,6 +111,8 @@
 #define	ECCCLEAR			0x100
 #define	ECC1				0x1
 
+#define OMAP24XX_DMA_GPMC		4
+
 /* oob info generated runtime depending on ecc algorithm and layout selected */
 static struct nand_ecclayout omap_oobinfo;
 /* Define some generic bad / good block scan pattern which are used
diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c
index 7a62b95dac24..c032fc2132d0 100644
--- a/drivers/usb/musb/tusb6010_omap.c
+++ b/drivers/usb/musb/tusb6010_omap.c
@@ -25,6 +25,13 @@
 
 #define MAX_DMAREQ		5	/* REVISIT: Really 6, but req5 not OK */
 
+#define OMAP24XX_DMA_EXT_DMAREQ0	2
+#define OMAP24XX_DMA_EXT_DMAREQ1	3
+#define OMAP242X_DMA_EXT_DMAREQ2	14
+#define OMAP242X_DMA_EXT_DMAREQ3	15
+#define OMAP242X_DMA_EXT_DMAREQ4	16
+#define OMAP242X_DMA_EXT_DMAREQ5	64
+
 struct tusb_omap_dma_ch {
 	struct musb		*musb;
 	void __iomem		*tbase;
-- 
cgit v1.2.3


From 2b6c4e73248758bac8e1ed81b0d0664da0fff6f8 Mon Sep 17 00:00:00 2001
From: Lokesh Vutla <lokeshvutla@ti.com>
Date: Mon, 15 Oct 2012 14:04:53 -0700
Subject: ARM: OMAP: DMA: Move plat/dma.h to plat-omap/dma-omap.h

Move plat/dma.h to plat-omap/dma-omap.h as part of single
zImage work

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/crypto/omap-aes.c                        | 2 +-
 drivers/crypto/omap-sham.c                       | 2 +-
 drivers/dma/omap-dma.c                           | 2 +-
 drivers/media/platform/omap/omap_vout.c          | 2 +-
 drivers/media/platform/omap/omap_vout_vrfb.c     | 2 +-
 drivers/media/platform/omap3isp/ispstat.h        | 2 +-
 drivers/media/platform/soc_camera/omap1_camera.c | 2 +-
 drivers/mmc/host/omap.c                          | 2 +-
 drivers/mtd/nand/omap2.c                         | 2 +-
 drivers/mtd/onenand/omap2.c                      | 2 +-
 drivers/usb/gadget/omap_udc.c                    | 2 +-
 drivers/usb/musb/tusb6010_omap.c                 | 2 +-
 drivers/video/omap/lcdc.c                        | 2 +-
 drivers/video/omap/omapfb_main.c                 | 2 +-
 drivers/video/omap/sossi.c                       | 2 +-
 15 files changed, 15 insertions(+), 15 deletions(-)

(limited to 'drivers')

diff --git a/drivers/crypto/omap-aes.c b/drivers/crypto/omap-aes.c
index 093a8af59cbe..3e61febb8bb6 100644
--- a/drivers/crypto/omap-aes.c
+++ b/drivers/crypto/omap-aes.c
@@ -30,7 +30,7 @@
 #include <crypto/aes.h>
 
 #include <plat/cpu.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 
 /* OMAP TRM gives bitfields as start:end, where start is the higher bit
    number. For example 7:0 */
diff --git a/drivers/crypto/omap-sham.c b/drivers/crypto/omap-sham.c
index a3fd6fc504b1..6d7969577143 100644
--- a/drivers/crypto/omap-sham.c
+++ b/drivers/crypto/omap-sham.c
@@ -38,7 +38,7 @@
 #include <crypto/internal/hash.h>
 
 #include <plat/cpu.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 #include <mach/irqs.h>
 
 #define SHA_REG_DIGEST(x)		(0x00 + ((x) * 0x04))
diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c
index bb2d8e7029eb..0b4fa50537e6 100644
--- a/drivers/dma/omap-dma.c
+++ b/drivers/dma/omap-dma.c
@@ -20,7 +20,7 @@
 #include "virt-dma.h"
 
 #include <plat/cpu.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 
 struct omap_dmadev {
 	struct dma_device ddev;
diff --git a/drivers/media/platform/omap/omap_vout.c b/drivers/media/platform/omap/omap_vout.c
index a3b1a34c896d..1bd6a2ec95a3 100644
--- a/drivers/media/platform/omap/omap_vout.c
+++ b/drivers/media/platform/omap/omap_vout.c
@@ -45,7 +45,7 @@
 #include <media/v4l2-ioctl.h>
 
 #include <plat/cpu.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 #include <plat/vrfb.h>
 #include <video/omapdss.h>
 
diff --git a/drivers/media/platform/omap/omap_vout_vrfb.c b/drivers/media/platform/omap/omap_vout_vrfb.c
index 11d7a29b9708..bed4cbb18ef5 100644
--- a/drivers/media/platform/omap/omap_vout_vrfb.c
+++ b/drivers/media/platform/omap/omap_vout_vrfb.c
@@ -16,7 +16,7 @@
 #include <media/videobuf-dma-contig.h>
 #include <media/v4l2-device.h>
 
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 #include <plat/vrfb.h>
 
 #include "omap_voutdef.h"
diff --git a/drivers/media/platform/omap3isp/ispstat.h b/drivers/media/platform/omap3isp/ispstat.h
index a6fe653eb237..40f87cdd7994 100644
--- a/drivers/media/platform/omap3isp/ispstat.h
+++ b/drivers/media/platform/omap3isp/ispstat.h
@@ -30,7 +30,7 @@
 
 #include <linux/types.h>
 #include <linux/omap3isp.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 #include <media/v4l2-event.h>
 
 #include "isp.h"
diff --git a/drivers/media/platform/soc_camera/omap1_camera.c b/drivers/media/platform/soc_camera/omap1_camera.c
index 3046dba91006..cae9ce6275e9 100644
--- a/drivers/media/platform/soc_camera/omap1_camera.c
+++ b/drivers/media/platform/soc_camera/omap1_camera.c
@@ -34,7 +34,7 @@
 #include <media/videobuf-dma-contig.h>
 #include <media/videobuf-dma-sg.h>
 
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 
 
 #define DRIVER_NAME		"omap1-camera"
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index 9664fa964760..c59c4d25165c 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -30,7 +30,7 @@
 #include <linux/slab.h>
 
 #include <plat/mmc.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 
 #define	OMAP_MMC_REG_CMD	0x00
 #define	OMAP_MMC_REG_ARGL	0x01
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 3105f22993cd..2cbdb8e17c74 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -27,7 +27,7 @@
 #include <linux/bch.h>
 #endif
 
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 #include <plat/gpmc.h>
 #include <linux/platform_data/mtd-nand-omap2.h>
 
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index 1961be985171..b846eafa2f09 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -42,7 +42,7 @@
 #include <linux/platform_data/mtd-onenand-omap2.h>
 #include <asm/gpio.h>
 
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 #include <plat/cpu.h>
 
 #define DRIVER_NAME "omap2-onenand"
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 024c0b9150bb..23afa06b65a4 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -44,7 +44,7 @@
 #include <asm/unaligned.h>
 #include <asm/mach-types.h>
 
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 
 #include <mach/usb.h>
 
diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c
index c032fc2132d0..bfca114f7c56 100644
--- a/drivers/usb/musb/tusb6010_omap.c
+++ b/drivers/usb/musb/tusb6010_omap.c
@@ -16,7 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/slab.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 
 #include "musb_core.h"
 #include "tusb6010.h"
diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c
index 7767338f8b14..c39d6e46f8c5 100644
--- a/drivers/video/omap/lcdc.c
+++ b/drivers/video/omap/lcdc.c
@@ -31,7 +31,7 @@
 #include <linux/gfp.h>
 
 #include <mach/lcdc.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 
 #include <asm/mach-types.h>
 
diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
index 4351c438b76f..1b5ee8ec192a 100644
--- a/drivers/video/omap/omapfb_main.c
+++ b/drivers/video/omap/omapfb_main.c
@@ -30,7 +30,7 @@
 #include <linux/uaccess.h>
 #include <linux/module.h>
 
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 
 #include "omapfb.h"
 #include "lcdc.h"
diff --git a/drivers/video/omap/sossi.c b/drivers/video/omap/sossi.c
index f79c137753d7..c510a4457398 100644
--- a/drivers/video/omap/sossi.c
+++ b/drivers/video/omap/sossi.c
@@ -25,7 +25,7 @@
 #include <linux/io.h>
 #include <linux/interrupt.h>
 
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 
 #include "omapfb.h"
 #include "lcdc.h"
-- 
cgit v1.2.3


From a656a06bbf01bca460764a5f9be860d2b29c4863 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Mon, 15 Oct 2012 16:24:12 -0700
Subject: staging: tidspbridge: remove unnecessary include of <plat/clock.h>

The DSPBridge driver includes arch/arm/plat-omap/include/plat/clock.h.
All of the <plat/ ...> includes are causing problems with the ARM
single image kernel effort.  Remove this one.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/staging/tidspbridge/include/dspbridge/host_os.h | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/staging/tidspbridge/include/dspbridge/host_os.h b/drivers/staging/tidspbridge/include/dspbridge/host_os.h
index ed00d3da3205..896f1579d5d7 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/host_os.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/host_os.h
@@ -40,7 +40,6 @@
 #include <linux/vmalloc.h>
 #include <linux/ioport.h>
 #include <linux/platform_device.h>
-#include <plat/clock.h>
 #include <linux/clk.h>
 #include <plat/mailbox.h>
 #include <linux/pagemap.h>
-- 
cgit v1.2.3


From 27615a97b2dc7e98b925973b78d1cdc3ee288ab0 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 15 Oct 2012 16:24:23 -0700
Subject: ARM: OMAP: Trivial driver changes to remove include plat/cpu.h

Drivers should not use cpu_is_omap or cpu_class_is_omap macros,
they should be private to the platform init code. And we'll be
removing plat/cpu.h and only have a private soc.h for the
arch/arm/*omap* code.

This patch is intended as preparation for the core omap changes
and removes the need to include plat/cpu.h from several drivers.
This is needed for the ARM common zImage support.

These changes are OK to do because:

- omap-rng.c does not need plat/cpu.h

- omap-aes.c and omap-sham.c get the proper platform_data
  passed to them so they don't need extra checks in the driver

- omap-dma.c and omap-pcm.c can test the arch locally as
  omap1 and omap2 cannot be compiled together because of
  conflicting compiler flags

Cc: Deepak Saxena <dsaxena@plexity.net>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David S. Miller <davem@davemloft.net>
Cc: Venkatraman S <svenkatr@ti.com>
Cc: Chris Ball <cjb@laptop.org>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <djbw@fb.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Cc: Liam Girdwood <lrg@ti.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Cc: linux-kernel@vger.kernel.org
[tony@atomide.com: mmc changes folded in to an earlier patch]
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/char/hw_random/omap-rng.c | 2 --
 drivers/crypto/omap-aes.c         | 6 ------
 drivers/crypto/omap-sham.c        | 8 --------
 drivers/dma/omap-dma.c            | 9 +++++++--
 4 files changed, 7 insertions(+), 18 deletions(-)

(limited to 'drivers')

diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c
index a5effd813abd..45e467dcc8c8 100644
--- a/drivers/char/hw_random/omap-rng.c
+++ b/drivers/char/hw_random/omap-rng.c
@@ -27,8 +27,6 @@
 
 #include <asm/io.h>
 
-#include <plat/cpu.h>
-
 #define RNG_OUT_REG		0x00		/* Output register */
 #define RNG_STAT_REG		0x04		/* Status register
 							[0] = STAT_BUSY */
diff --git a/drivers/crypto/omap-aes.c b/drivers/crypto/omap-aes.c
index 093a8af59cbe..db3115d16cde 100644
--- a/drivers/crypto/omap-aes.c
+++ b/drivers/crypto/omap-aes.c
@@ -29,7 +29,6 @@
 #include <crypto/scatterwalk.h>
 #include <crypto/aes.h>
 
-#include <plat/cpu.h>
 #include <plat/dma.h>
 
 /* OMAP TRM gives bitfields as start:end, where start is the higher bit
@@ -941,11 +940,6 @@ static int __init omap_aes_mod_init(void)
 {
 	pr_info("loading %s driver\n", "omap-aes");
 
-	if (!cpu_class_is_omap2() || omap_type() != OMAP2_DEVICE_TYPE_SEC) {
-		pr_err("Unsupported cpu\n");
-		return -ENODEV;
-	}
-
 	return  platform_driver_register(&omap_aes_driver);
 }
 
diff --git a/drivers/crypto/omap-sham.c b/drivers/crypto/omap-sham.c
index a3fd6fc504b1..f50387c4ef89 100644
--- a/drivers/crypto/omap-sham.c
+++ b/drivers/crypto/omap-sham.c
@@ -37,7 +37,6 @@
 #include <crypto/hash.h>
 #include <crypto/internal/hash.h>
 
-#include <plat/cpu.h>
 #include <plat/dma.h>
 #include <mach/irqs.h>
 
@@ -1289,13 +1288,6 @@ static int __init omap_sham_mod_init(void)
 {
 	pr_info("loading %s driver\n", "omap-sham");
 
-	if (!cpu_class_is_omap2() ||
-		(omap_type() != OMAP2_DEVICE_TYPE_SEC &&
-			omap_type() != OMAP2_DEVICE_TYPE_EMU)) {
-		pr_err("Unsupported cpu\n");
-		return -ENODEV;
-	}
-
 	return platform_driver_register(&omap_sham_driver);
 }
 
diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c
index bb2d8e7029eb..30abe7b36aaa 100644
--- a/drivers/dma/omap-dma.c
+++ b/drivers/dma/omap-dma.c
@@ -19,9 +19,14 @@
 
 #include "virt-dma.h"
 
-#include <plat/cpu.h>
 #include <plat/dma.h>
 
+#ifdef CONFIG_ARCH_OMAP2PLUS
+#define dma_omap2plus()	1
+#else
+#define dma_omap2plus()	0
+#endif
+
 struct omap_dmadev {
 	struct dma_device ddev;
 	spinlock_t lock;
@@ -438,7 +443,7 @@ static struct dma_async_tx_descriptor *omap_dma_prep_dma_cyclic(
 		omap_disable_dma_irq(c->dma_ch, OMAP_DMA_BLOCK_IRQ);
 	}
 
-	if (!cpu_class_is_omap1()) {
+	if (dma_omap2plus()) {
 		omap_set_dma_src_burst_mode(c->dma_ch, OMAP_DMA_DATA_BURST_16);
 		omap_set_dma_dest_burst_mode(c->dma_ch, OMAP_DMA_DATA_BURST_16);
 	}
-- 
cgit v1.2.3


From 649514c65cdca0102093a0e85b587b3f5a8d8c42 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Fri, 28 Sep 2012 12:46:49 +0300
Subject: OMAPDSS: use omapdss_version in dss_features.c

Pass the omapdss_version to dss_features.c and use it to select the
proper dss features.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/core.c         |  2 +-
 drivers/video/omap2/dss/dss_features.c | 49 ++++++++++++++++++++++------------
 drivers/video/omap2/dss/dss_features.h |  2 +-
 3 files changed, 34 insertions(+), 19 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c
index b2af72dc20bd..d94ef9e31a35 100644
--- a/drivers/video/omap2/dss/core.c
+++ b/drivers/video/omap2/dss/core.c
@@ -237,7 +237,7 @@ static int __init omap_dss_probe(struct platform_device *pdev)
 
 	core.pdev = pdev;
 
-	dss_features_init();
+	dss_features_init(pdata->version);
 
 	dss_apply_init();
 
diff --git a/drivers/video/omap2/dss/dss_features.c b/drivers/video/omap2/dss/dss_features.c
index acbc1e1efba3..5936ba78c14a 100644
--- a/drivers/video/omap2/dss/dss_features.c
+++ b/drivers/video/omap2/dss/dss_features.c
@@ -929,29 +929,44 @@ bool dss_feat_rotation_type_supported(enum omap_dss_rotation_type rot_type)
 	return omap_current_dss_features->supported_rotation_types & rot_type;
 }
 
-void dss_features_init(void)
+void dss_features_init(enum omapdss_version version)
 {
-	if (cpu_is_omap24xx())
+	switch (version) {
+	case OMAPDSS_VER_OMAP24xx:
 		omap_current_dss_features = &omap2_dss_features;
-	else if (cpu_is_omap3630())
+		break;
+
+	case OMAPDSS_VER_OMAP34xx_ES1:
+	case OMAPDSS_VER_OMAP34xx_ES3:
+		omap_current_dss_features = &omap3430_dss_features;
+		break;
+
+	case OMAPDSS_VER_OMAP3630:
 		omap_current_dss_features = &omap3630_dss_features;
-	else if (cpu_is_omap34xx()) {
-		if (soc_is_am35xx()) {
-			omap_current_dss_features = &am35xx_dss_features;
-		} else {
-			omap_current_dss_features = &omap3430_dss_features;
-		}
-	}
-	else if (omap_rev() == OMAP4430_REV_ES1_0)
+		break;
+
+	case OMAPDSS_VER_OMAP4430_ES1:
 		omap_current_dss_features = &omap4430_es1_0_dss_features;
-	else if (omap_rev() == OMAP4430_REV_ES2_0 ||
-		omap_rev() == OMAP4430_REV_ES2_1 ||
-		omap_rev() == OMAP4430_REV_ES2_2)
+		break;
+
+	case OMAPDSS_VER_OMAP4430_ES2:
 		omap_current_dss_features = &omap4430_es2_0_1_2_dss_features;
-	else if (cpu_is_omap44xx())
+		break;
+
+	case OMAPDSS_VER_OMAP4:
 		omap_current_dss_features = &omap4_dss_features;
-	else if (soc_is_omap54xx())
+		break;
+
+	case OMAPDSS_VER_OMAP5:
 		omap_current_dss_features = &omap5_dss_features;
-	else
+		break;
+
+	case OMAPDSS_VER_AM35xx:
+		omap_current_dss_features = &am35xx_dss_features;
+		break;
+
+	default:
 		DSSWARN("Unsupported OMAP version");
+		break;
+	}
 }
diff --git a/drivers/video/omap2/dss/dss_features.h b/drivers/video/omap2/dss/dss_features.h
index 9218113b5e88..14a412ea8dc6 100644
--- a/drivers/video/omap2/dss/dss_features.h
+++ b/drivers/video/omap2/dss/dss_features.h
@@ -123,7 +123,7 @@ bool dss_feat_rotation_type_supported(enum omap_dss_rotation_type rot_type);
 
 bool dss_has_feature(enum dss_feat_id id);
 void dss_feat_get_reg_field(enum dss_feat_reg_field id, u8 *start, u8 *end);
-void dss_features_init(void);
+void dss_features_init(enum omapdss_version version);
 #if defined(CONFIG_OMAP4_DSS_HDMI)
 void dss_init_hdmi_ip_ops(struct hdmi_ip_data *ip_data);
 #endif
-- 
cgit v1.2.3


From 84b4762302cda5c1b19a9628acc3ef90db948dff Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Fri, 28 Sep 2012 12:54:03 +0300
Subject: OMAPDSS: DISPC: use omapdss_version

Use omapdss_version in dispc.c to select the proper dispc features.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dispc.c | 41 ++++++++++++++++++++++++++++-------------
 1 file changed, 28 insertions(+), 13 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index b43477a5fae8..d30e5fa1864a 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -4042,29 +4042,44 @@ static const struct dispc_features omap44xx_dispc_feats __initconst = {
 	.gfx_fifo_workaround	=	true,
 };
 
-static int __init dispc_init_features(struct device *dev)
+static int __init dispc_init_features(struct platform_device *pdev)
 {
+	struct omap_dss_board_info *pdata = pdev->dev.platform_data;
 	const struct dispc_features *src;
 	struct dispc_features *dst;
 
-	dst = devm_kzalloc(dev, sizeof(*dst), GFP_KERNEL);
+	dst = devm_kzalloc(&pdev->dev, sizeof(*dst), GFP_KERNEL);
 	if (!dst) {
-		dev_err(dev, "Failed to allocate DISPC Features\n");
+		dev_err(&pdev->dev, "Failed to allocate DISPC Features\n");
 		return -ENOMEM;
 	}
 
-	if (cpu_is_omap24xx()) {
+	switch (pdata->version) {
+	case OMAPDSS_VER_OMAP24xx:
 		src = &omap24xx_dispc_feats;
-	} else if (cpu_is_omap34xx()) {
-		if (omap_rev() < OMAP3430_REV_ES3_0)
-			src = &omap34xx_rev1_0_dispc_feats;
-		else
-			src = &omap34xx_rev3_0_dispc_feats;
-	} else if (cpu_is_omap44xx()) {
+		break;
+
+	case OMAPDSS_VER_OMAP34xx_ES1:
+		src = &omap34xx_rev1_0_dispc_feats;
+		break;
+
+	case OMAPDSS_VER_OMAP34xx_ES3:
+	case OMAPDSS_VER_OMAP3630:
+	case OMAPDSS_VER_AM35xx:
+		src = &omap34xx_rev3_0_dispc_feats;
+		break;
+
+	case OMAPDSS_VER_OMAP4430_ES1:
+	case OMAPDSS_VER_OMAP4430_ES2:
+	case OMAPDSS_VER_OMAP4:
 		src = &omap44xx_dispc_feats;
-	} else if (soc_is_omap54xx()) {
+		break;
+
+	case OMAPDSS_VER_OMAP5:
 		src = &omap44xx_dispc_feats;
-	} else {
+		break;
+
+	default:
 		return -ENODEV;
 	}
 
@@ -4084,7 +4099,7 @@ static int __init omap_dispchw_probe(struct platform_device *pdev)
 
 	dispc.pdev = pdev;
 
-	r = dispc_init_features(&dispc.pdev->dev);
+	r = dispc_init_features(dispc.pdev);
 	if (r)
 		return r;
 
-- 
cgit v1.2.3


From bd81ed0818875e233a3d400cc3c70454a0a53c08 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Fri, 28 Sep 2012 12:56:00 +0300
Subject: OMAPDSS: DSS: use omapdss_version

Use omapdss_version in dss.c to select the proper dss features.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dss.c | 37 +++++++++++++++++++++++++++----------
 1 file changed, 27 insertions(+), 10 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 2ab1c3e96553..2e74eef92fad 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -792,29 +792,46 @@ static const struct dss_features omap54xx_dss_feats __initconst = {
 	.dpi_select_source	=	&dss_dpi_select_source_omap5,
 };
 
-static int __init dss_init_features(struct device *dev)
+static int __init dss_init_features(struct platform_device *pdev)
 {
+	struct omap_dss_board_info *pdata = pdev->dev.platform_data;
 	const struct dss_features *src;
 	struct dss_features *dst;
 
-	dst = devm_kzalloc(dev, sizeof(*dst), GFP_KERNEL);
+	dst = devm_kzalloc(&pdev->dev, sizeof(*dst), GFP_KERNEL);
 	if (!dst) {
-		dev_err(dev, "Failed to allocate local DSS Features\n");
+		dev_err(&pdev->dev, "Failed to allocate local DSS Features\n");
 		return -ENOMEM;
 	}
 
-	if (cpu_is_omap24xx())
+	switch (pdata->version) {
+	case OMAPDSS_VER_OMAP24xx:
 		src = &omap24xx_dss_feats;
-	else if (cpu_is_omap34xx())
+		break;
+
+	case OMAPDSS_VER_OMAP34xx_ES1:
+	case OMAPDSS_VER_OMAP34xx_ES3:
+	case OMAPDSS_VER_AM35xx:
 		src = &omap34xx_dss_feats;
-	else if (cpu_is_omap3630())
+		break;
+
+	case OMAPDSS_VER_OMAP3630:
 		src = &omap3630_dss_feats;
-	else if (cpu_is_omap44xx())
+		break;
+
+	case OMAPDSS_VER_OMAP4430_ES1:
+	case OMAPDSS_VER_OMAP4430_ES2:
+	case OMAPDSS_VER_OMAP4:
 		src = &omap44xx_dss_feats;
-	else if (soc_is_omap54xx())
+		break;
+
+	case OMAPDSS_VER_OMAP5:
 		src = &omap54xx_dss_feats;
-	else
+		break;
+
+	default:
 		return -ENODEV;
+	}
 
 	memcpy(dst, src, sizeof(*dst));
 	dss.feat = dst;
@@ -831,7 +848,7 @@ static int __init omap_dsshw_probe(struct platform_device *pdev)
 
 	dss.pdev = pdev;
 
-	r = dss_init_features(&dss.pdev->dev);
+	r = dss_init_features(dss.pdev);
 	if (r)
 		return r;
 
-- 
cgit v1.2.3


From 6fa44907eef4aed168413b6883ddc1fa2efff201 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Fri, 28 Sep 2012 13:00:33 +0300
Subject: OMAPDSS: HDMI: use omapdss_version

Use omapdss_version in hdmi.c to select the proper hdmi features.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dss_features.c | 14 ++++++++++++--
 drivers/video/omap2/dss/dss_features.h |  3 ++-
 drivers/video/omap2/dss/hdmi.c         |  3 ++-
 3 files changed, 16 insertions(+), 4 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/omap2/dss/dss_features.c b/drivers/video/omap2/dss/dss_features.c
index 5936ba78c14a..e2c2e2b8218a 100644
--- a/drivers/video/omap2/dss/dss_features.c
+++ b/drivers/video/omap2/dss/dss_features.c
@@ -825,10 +825,20 @@ static const struct ti_hdmi_ip_ops omap4_hdmi_functions = {
 
 };
 
-void dss_init_hdmi_ip_ops(struct hdmi_ip_data *ip_data)
+void dss_init_hdmi_ip_ops(struct hdmi_ip_data *ip_data,
+		enum omapdss_version version)
 {
-	if (cpu_is_omap44xx())
+	switch (version) {
+	case OMAPDSS_VER_OMAP4430_ES1:
+	case OMAPDSS_VER_OMAP4430_ES2:
+	case OMAPDSS_VER_OMAP4:
 		ip_data->ops = &omap4_hdmi_functions;
+		break;
+	default:
+		ip_data->ops = NULL;
+	}
+
+	WARN_ON(ip_data->ops == NULL);
 }
 #endif
 
diff --git a/drivers/video/omap2/dss/dss_features.h b/drivers/video/omap2/dss/dss_features.h
index 14a412ea8dc6..fc492ef72a51 100644
--- a/drivers/video/omap2/dss/dss_features.h
+++ b/drivers/video/omap2/dss/dss_features.h
@@ -125,6 +125,7 @@ bool dss_has_feature(enum dss_feat_id id);
 void dss_feat_get_reg_field(enum dss_feat_reg_field id, u8 *start, u8 *end);
 void dss_features_init(enum omapdss_version version);
 #if defined(CONFIG_OMAP4_DSS_HDMI)
-void dss_init_hdmi_ip_ops(struct hdmi_ip_data *ip_data);
+void dss_init_hdmi_ip_ops(struct hdmi_ip_data *ip_data,
+		enum omapdss_version version);
 #endif
 #endif
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index a48a7dd75b33..adcc906d12f8 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -323,6 +323,7 @@ static void hdmi_runtime_put(void)
 
 static int __init hdmi_init_display(struct omap_dss_device *dssdev)
 {
+	struct omap_dss_board_info *pdata = hdmi.pdev->dev.platform_data;
 	int r;
 
 	struct gpio gpios[] = {
@@ -333,7 +334,7 @@ static int __init hdmi_init_display(struct omap_dss_device *dssdev)
 
 	DSSDBG("init_display\n");
 
-	dss_init_hdmi_ip_ops(&hdmi.ip_data);
+	dss_init_hdmi_ip_ops(&hdmi.ip_data, pdata->version);
 
 	if (hdmi.vdda_hdmi_dac_reg == NULL) {
 		struct regulator *reg;
-- 
cgit v1.2.3


From 35f70935c64ae229ebd1fc65398ec68d4d803712 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Fri, 28 Sep 2012 13:02:06 +0300
Subject: OMAPDSS: remove <plat/cpu.h> includes

cpu_is_* calls are no longer used in omapdss, so the includes for
<plat/cpu.h> can be removed.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dispc.c        | 2 --
 drivers/video/omap2/dss/dss.c          | 2 --
 drivers/video/omap2/dss/dss_features.c | 1 -
 3 files changed, 5 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index d30e5fa1864a..a5ab354f267a 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -37,8 +37,6 @@
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 
-#include <plat/cpu.h>
-
 #include <video/omapdss.h>
 
 #include "dss.h"
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 2e74eef92fad..363852a0f764 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -35,8 +35,6 @@
 
 #include <video/omapdss.h>
 
-#include <plat/cpu.h>
-
 #include "dss.h"
 #include "dss_features.h"
 
diff --git a/drivers/video/omap2/dss/dss_features.c b/drivers/video/omap2/dss/dss_features.c
index e2c2e2b8218a..3e8287c8709d 100644
--- a/drivers/video/omap2/dss/dss_features.c
+++ b/drivers/video/omap2/dss/dss_features.c
@@ -23,7 +23,6 @@
 #include <linux/slab.h>
 
 #include <video/omapdss.h>
-#include <plat/cpu.h>
 
 #include "dss.h"
 #include "dss_features.h"
-- 
cgit v1.2.3


From 406c8563a7b07ce91b1310536948477c7a8755de Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Mon, 8 Oct 2012 14:35:44 +0300
Subject: OMAP: VRFB: convert vrfb to platform device

This patch converts vrfb library into a platform device, in an effort to
remove omap dependencies.

The platform device is registered in arch/arm/plat-omap/fb.c and
assigned resources depending on whether running on omap2 or omap3.

The vrfb driver will parse those resources and use them to access vrfb
configuration registers and the vrfb virtual rotation areas.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
---
 drivers/video/omap2/vrfb.c | 124 +++++++++++++++++++++++++++++++++++++--------
 1 file changed, 104 insertions(+), 20 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/omap2/vrfb.c b/drivers/video/omap2/vrfb.c
index 7e990220ad2a..fda45cc10d48 100644
--- a/drivers/video/omap2/vrfb.c
+++ b/drivers/video/omap2/vrfb.c
@@ -26,9 +26,9 @@
 #include <linux/io.h>
 #include <linux/bitops.h>
 #include <linux/mutex.h>
+#include <linux/platform_device.h>
 
 #include <plat/vrfb.h>
-#include <plat/sdrc.h>
 
 #ifdef DEBUG
 #define DBG(format, ...) pr_debug("VRFB: " format, ## __VA_ARGS__)
@@ -36,10 +36,10 @@
 #define DBG(format, ...)
 #endif
 
-#define SMS_ROT_VIRT_BASE(context, rot) \
-	(((context >= 4) ? 0xD0000000 : 0x70000000) \
-	 + (0x4000000 * (context)) \
-	 + (0x1000000 * (rot)))
+#define SMS_ROT_CONTROL(context)	(0x0 + 0x10 * context)
+#define SMS_ROT_SIZE(context)		(0x4 + 0x10 * context)
+#define SMS_ROT_PHYSICAL_BA(context)	(0x8 + 0x10 * context)
+#define SMS_ROT_VIRT_BASE(rot)		(0x1000000 * (rot))
 
 #define OMAP_VRFB_SIZE			(2048 * 2048 * 4)
 
@@ -53,10 +53,16 @@
 #define SMS_PW_OFFSET		4
 #define SMS_PS_OFFSET		0
 
-#define VRFB_NUM_CTXS 12
 /* bitmap of reserved contexts */
 static unsigned long ctx_map;
 
+struct vrfb_ctx {
+	u32 base;
+	u32 physical_ba;
+	u32 control;
+	u32 size;
+};
+
 static DEFINE_MUTEX(ctx_lock);
 
 /*
@@ -65,17 +71,32 @@ static DEFINE_MUTEX(ctx_lock);
  * we don't need locking, since no drivers will run until after the wake-up
  * has finished.
  */
-static struct {
-	u32 physical_ba;
-	u32 control;
-	u32 size;
-} vrfb_hw_context[VRFB_NUM_CTXS];
+
+static void __iomem *vrfb_base;
+
+static int num_ctxs;
+static struct vrfb_ctx *ctxs;
+
+static void omap2_sms_write_rot_control(u32 val, unsigned ctx)
+{
+	__raw_writel(val, vrfb_base + SMS_ROT_CONTROL(ctx));
+}
+
+static void omap2_sms_write_rot_size(u32 val, unsigned ctx)
+{
+	__raw_writel(val, vrfb_base + SMS_ROT_SIZE(ctx));
+}
+
+static void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx)
+{
+	__raw_writel(val, vrfb_base + SMS_ROT_PHYSICAL_BA(ctx));
+}
 
 static inline void restore_hw_context(int ctx)
 {
-	omap2_sms_write_rot_control(vrfb_hw_context[ctx].control, ctx);
-	omap2_sms_write_rot_size(vrfb_hw_context[ctx].size, ctx);
-	omap2_sms_write_rot_physical_ba(vrfb_hw_context[ctx].physical_ba, ctx);
+	omap2_sms_write_rot_control(ctxs[ctx].control, ctx);
+	omap2_sms_write_rot_size(ctxs[ctx].size, ctx);
+	omap2_sms_write_rot_physical_ba(ctxs[ctx].physical_ba, ctx);
 }
 
 static u32 get_image_width_roundup(u16 width, u8 bytespp)
@@ -196,9 +217,9 @@ void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr,
 	control |= VRFB_PAGE_WIDTH_EXP  << SMS_PW_OFFSET;
 	control |= VRFB_PAGE_HEIGHT_EXP << SMS_PH_OFFSET;
 
-	vrfb_hw_context[ctx].physical_ba = paddr;
-	vrfb_hw_context[ctx].size = size;
-	vrfb_hw_context[ctx].control = control;
+	ctxs[ctx].physical_ba = paddr;
+	ctxs[ctx].size = size;
+	ctxs[ctx].control = control;
 
 	omap2_sms_write_rot_physical_ba(paddr, ctx);
 	omap2_sms_write_rot_size(size, ctx);
@@ -274,11 +295,11 @@ int omap_vrfb_request_ctx(struct vrfb *vrfb)
 
 	mutex_lock(&ctx_lock);
 
-	for (ctx = 0; ctx < VRFB_NUM_CTXS; ++ctx)
+	for (ctx = 0; ctx < num_ctxs; ++ctx)
 		if ((ctx_map & (1 << ctx)) == 0)
 			break;
 
-	if (ctx == VRFB_NUM_CTXS) {
+	if (ctx == num_ctxs) {
 		pr_err("vrfb: no free contexts\n");
 		r = -EBUSY;
 		goto out;
@@ -293,7 +314,7 @@ int omap_vrfb_request_ctx(struct vrfb *vrfb)
 	vrfb->context = ctx;
 
 	for (rot = 0; rot < 4; ++rot) {
-		paddr = SMS_ROT_VIRT_BASE(ctx, rot);
+		paddr = ctxs[ctx].base + SMS_ROT_VIRT_BASE(rot);
 		if (!request_mem_region(paddr, OMAP_VRFB_SIZE, "vrfb")) {
 			pr_err("vrfb: failed to reserve VRFB "
 					"area for ctx %d, rotation %d\n",
@@ -314,3 +335,66 @@ out:
 	return r;
 }
 EXPORT_SYMBOL(omap_vrfb_request_ctx);
+
+static int __init vrfb_probe(struct platform_device *pdev)
+{
+	struct resource *mem;
+	int i;
+
+	/* first resource is the register res, the rest are vrfb contexts */
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem) {
+		dev_err(&pdev->dev, "can't get vrfb base address\n");
+		return -EINVAL;
+	}
+
+	vrfb_base = devm_request_and_ioremap(&pdev->dev, mem);
+	if (!vrfb_base) {
+		dev_err(&pdev->dev, "can't ioremap vrfb memory\n");
+		return -ENOMEM;
+	}
+
+	num_ctxs = pdev->num_resources - 1;
+
+	ctxs = devm_kzalloc(&pdev->dev,
+			sizeof(struct vrfb_ctx) * num_ctxs,
+			GFP_KERNEL);
+
+	if (!ctxs)
+		return -ENOMEM;
+
+	for (i = 0; i < num_ctxs; ++i) {
+		mem = platform_get_resource(pdev, IORESOURCE_MEM, 1 + i);
+		if (!mem) {
+			dev_err(&pdev->dev, "can't get vrfb ctx %d address\n",
+					i);
+			return -EINVAL;
+		}
+
+		ctxs[i].base = mem->start;
+	}
+
+	return 0;
+}
+
+static struct platform_driver vrfb_driver = {
+	.driver.name	= "omapvrfb",
+};
+
+static int __init vrfb_init(void)
+{
+	return platform_driver_probe(&vrfb_driver, &vrfb_probe);
+}
+
+static void __exit vrfb_exit(void)
+{
+	platform_driver_unregister(&vrfb_driver);
+}
+
+module_init(vrfb_init);
+module_exit(vrfb_exit);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
+MODULE_DESCRIPTION("OMAP VRFB");
+MODULE_LICENSE("GPL v2");
-- 
cgit v1.2.3


From 6a1c9f6d19180cdbb603e5b77bd7b57d01260664 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Mon, 8 Oct 2012 14:52:24 +0300
Subject: OMAP: move arch/arm/plat-omap/include/plat/vrfb.h

Now that vrfb driver is not omap dependent anymore, we can move vrfb.h
from arch/arm/plat-omap/include/plat to include/video/omapvrfb.h.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Vaibhav Hiremath <hvaibhav@ti.com>
---
 drivers/media/platform/omap/omap_vout.c      | 2 +-
 drivers/media/platform/omap/omap_vout_vrfb.c | 2 +-
 drivers/media/platform/omap/omap_voutdef.h   | 2 +-
 drivers/video/omap2/omapfb/omapfb-ioctl.c    | 2 +-
 drivers/video/omap2/omapfb/omapfb-main.c     | 2 +-
 drivers/video/omap2/omapfb/omapfb-sysfs.c    | 2 +-
 drivers/video/omap2/vrfb.c                   | 2 +-
 7 files changed, 7 insertions(+), 7 deletions(-)

(limited to 'drivers')

diff --git a/drivers/media/platform/omap/omap_vout.c b/drivers/media/platform/omap/omap_vout.c
index a3b1a34c896d..3ff94a30fde4 100644
--- a/drivers/media/platform/omap/omap_vout.c
+++ b/drivers/media/platform/omap/omap_vout.c
@@ -46,7 +46,7 @@
 
 #include <plat/cpu.h>
 #include <plat/dma.h>
-#include <plat/vrfb.h>
+#include <video/omapvrfb.h>
 #include <video/omapdss.h>
 
 #include "omap_voutlib.h"
diff --git a/drivers/media/platform/omap/omap_vout_vrfb.c b/drivers/media/platform/omap/omap_vout_vrfb.c
index 4be26abf6cea..6c37f9240ddf 100644
--- a/drivers/media/platform/omap/omap_vout_vrfb.c
+++ b/drivers/media/platform/omap/omap_vout_vrfb.c
@@ -17,7 +17,7 @@
 #include <media/v4l2-device.h>
 
 #include <plat/dma.h>
-#include <plat/vrfb.h>
+#include <video/omapvrfb.h>
 
 #include "omap_voutdef.h"
 #include "omap_voutlib.h"
diff --git a/drivers/media/platform/omap/omap_voutdef.h b/drivers/media/platform/omap/omap_voutdef.h
index 27a95d23b913..9ccfe1f475a4 100644
--- a/drivers/media/platform/omap/omap_voutdef.h
+++ b/drivers/media/platform/omap/omap_voutdef.h
@@ -12,7 +12,7 @@
 #define OMAP_VOUTDEF_H
 
 #include <video/omapdss.h>
-#include <plat/vrfb.h>
+#include <video/omapvrfb.h>
 
 #define YUYV_BPP        2
 #define RGB565_BPP      2
diff --git a/drivers/video/omap2/omapfb/omapfb-ioctl.c b/drivers/video/omap2/omapfb/omapfb-ioctl.c
index 606b89f12351..55a39be694a5 100644
--- a/drivers/video/omap2/omapfb/omapfb-ioctl.c
+++ b/drivers/video/omap2/omapfb/omapfb-ioctl.c
@@ -30,7 +30,7 @@
 #include <linux/export.h>
 
 #include <video/omapdss.h>
-#include <plat/vrfb.h>
+#include <video/omapvrfb.h>
 #include <plat/vram.h>
 
 #include "omapfb.h"
diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
index 16db1589bd91..5943b3a5d55a 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -33,7 +33,7 @@
 #include <video/omapdss.h>
 #include <plat/cpu.h>
 #include <plat/vram.h>
-#include <plat/vrfb.h>
+#include <video/omapvrfb.h>
 
 #include "omapfb.h"
 
diff --git a/drivers/video/omap2/omapfb/omapfb-sysfs.c b/drivers/video/omap2/omapfb/omapfb-sysfs.c
index e8d8cc76a435..17aa174e187c 100644
--- a/drivers/video/omap2/omapfb/omapfb-sysfs.c
+++ b/drivers/video/omap2/omapfb/omapfb-sysfs.c
@@ -30,7 +30,7 @@
 #include <linux/omapfb.h>
 
 #include <video/omapdss.h>
-#include <plat/vrfb.h>
+#include <video/omapvrfb.h>
 
 #include "omapfb.h"
 
diff --git a/drivers/video/omap2/vrfb.c b/drivers/video/omap2/vrfb.c
index fda45cc10d48..e4a0450a39a1 100644
--- a/drivers/video/omap2/vrfb.c
+++ b/drivers/video/omap2/vrfb.c
@@ -28,7 +28,7 @@
 #include <linux/mutex.h>
 #include <linux/platform_device.h>
 
-#include <plat/vrfb.h>
+#include <video/omapvrfb.h>
 
 #ifdef DEBUG
 #define DBG(format, ...) pr_debug("VRFB: " format, ## __VA_ARGS__)
-- 
cgit v1.2.3


From aa1e49a3752f09b3d2ab706f6d48916a04acf557 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Wed, 17 Oct 2012 12:15:31 +0300
Subject: OMAPDSS: VRFB: add omap_vrfb_supported()

Add an exported function omap_vrfb_supported() which returns true if the
vrfb driver has been loaded succesfully. This can be used to decide if
VRFB can be used or not.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/vrfb.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

(limited to 'drivers')

diff --git a/drivers/video/omap2/vrfb.c b/drivers/video/omap2/vrfb.c
index e4a0450a39a1..5d8fdac3b800 100644
--- a/drivers/video/omap2/vrfb.c
+++ b/drivers/video/omap2/vrfb.c
@@ -77,6 +77,8 @@ static void __iomem *vrfb_base;
 static int num_ctxs;
 static struct vrfb_ctx *ctxs;
 
+static bool vrfb_loaded;
+
 static void omap2_sms_write_rot_control(u32 val, unsigned ctx)
 {
 	__raw_writel(val, vrfb_base + SMS_ROT_CONTROL(ctx));
@@ -336,6 +338,12 @@ out:
 }
 EXPORT_SYMBOL(omap_vrfb_request_ctx);
 
+bool omap_vrfb_supported(void)
+{
+	return vrfb_loaded;
+}
+EXPORT_SYMBOL(omap_vrfb_supported);
+
 static int __init vrfb_probe(struct platform_device *pdev)
 {
 	struct resource *mem;
@@ -375,11 +383,19 @@ static int __init vrfb_probe(struct platform_device *pdev)
 		ctxs[i].base = mem->start;
 	}
 
+	vrfb_loaded = true;
+
 	return 0;
 }
 
+static void __exit vrfb_remove(struct platform_device *pdev)
+{
+	vrfb_loaded = false;
+}
+
 static struct platform_driver vrfb_driver = {
 	.driver.name	= "omapvrfb",
+	.remove		= __exit_p(vrfb_remove),
 };
 
 static int __init vrfb_init(void)
-- 
cgit v1.2.3


From a89d1a87ad80277939c7fcfb8484f0b110d264ef Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Wed, 17 Oct 2012 12:16:50 +0300
Subject: OMAPFB: use omap_vrfb_supported()

Replace cpu_is_*() check with omap_vrfb_supported().

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/omapfb/omapfb-main.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
index 5943b3a5d55a..bc225e46fdd2 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -31,7 +31,6 @@
 #include <linux/omapfb.h>
 
 #include <video/omapdss.h>
-#include <plat/cpu.h>
 #include <plat/vram.h>
 #include <video/omapvrfb.h>
 
@@ -2396,10 +2395,7 @@ static int __init omapfb_probe(struct platform_device *pdev)
 		goto err0;
 	}
 
-	/* TODO : Replace cpu check with omap_has_vrfb once HAS_FEATURE
-	*	 available for OMAP2 and OMAP3
-	*/
-	if (def_vrfb && !cpu_is_omap24xx() && !cpu_is_omap34xx()) {
+	if (def_vrfb && !omap_vrfb_supported()) {
 		def_vrfb = 0;
 		dev_warn(&pdev->dev, "VRFB is not supported on this hardware, "
 				"ignoring the module parameter vrfb=y\n");
-- 
cgit v1.2.3


From 4c98dc6b8ef2f73bdbfa78186db9a76507ba9ea3 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Tue, 2 Oct 2012 12:39:09 -0700
Subject: ARM: OMAP: Make plat/fpga.h local to arch/arm/plat-omap

There's no need to have this file in plat/fpga.h. We can
make it local to plat-omap replacing fpga_read/write
functions directly with readb/writeb as that's how
they are already defined in fpga.h.

Note that 2420 based H4 is also using the fpga, so let's
keep the led support around in plat-omap until we flip
over mach-omap2 to device tree.

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: Felipe Balbi <balbi@ti.com>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/usb/host/ohci-omap.c     | 5 ++---
 drivers/video/omap/lcd_inn1510.c | 7 ++++---
 2 files changed, 6 insertions(+), 6 deletions(-)

(limited to 'drivers')

diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 4531d03503c3..439e6e4f2d6b 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -25,7 +25,6 @@
 #include <asm/mach-types.h>
 
 #include <mach/mux.h>
-#include <plat/fpga.h>
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
@@ -93,14 +92,14 @@ static int omap_ohci_transceiver_power(int on)
 {
 	if (on) {
 		if (machine_is_omap_innovator() && cpu_is_omap1510())
-			fpga_write(fpga_read(INNOVATOR_FPGA_CAM_USB_CONTROL)
+			__raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL)
 				| ((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
 			       INNOVATOR_FPGA_CAM_USB_CONTROL);
 		else if (machine_is_omap_osk())
 			tps65010_set_gpio_out_value(GPIO1, LOW);
 	} else {
 		if (machine_is_omap_innovator() && cpu_is_omap1510())
-			fpga_write(fpga_read(INNOVATOR_FPGA_CAM_USB_CONTROL)
+			__raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL)
 				& ~((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
 			       INNOVATOR_FPGA_CAM_USB_CONTROL);
 		else if (machine_is_omap_osk())
diff --git a/drivers/video/omap/lcd_inn1510.c b/drivers/video/omap/lcd_inn1510.c
index b38b1dd15ce3..2ee423279e35 100644
--- a/drivers/video/omap/lcd_inn1510.c
+++ b/drivers/video/omap/lcd_inn1510.c
@@ -23,7 +23,8 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
-#include <plat/fpga.h>
+#include <mach/hardware.h>
+
 #include "omapfb.h"
 
 static int innovator1510_panel_init(struct lcd_panel *panel,
@@ -38,13 +39,13 @@ static void innovator1510_panel_cleanup(struct lcd_panel *panel)
 
 static int innovator1510_panel_enable(struct lcd_panel *panel)
 {
-	fpga_write(0x7, OMAP1510_FPGA_LCD_PANEL_CONTROL);
+	__raw_writeb(0x7, OMAP1510_FPGA_LCD_PANEL_CONTROL);
 	return 0;
 }
 
 static void innovator1510_panel_disable(struct lcd_panel *panel)
 {
-	fpga_write(0x0, OMAP1510_FPGA_LCD_PANEL_CONTROL);
+	__raw_writeb(0x0, OMAP1510_FPGA_LCD_PANEL_CONTROL);
 }
 
 static unsigned long innovator1510_panel_get_caps(struct lcd_panel *panel)
-- 
cgit v1.2.3


From 54b693d46772f59fcfcb2cdd0f8b4bff2392b188 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Tue, 2 Oct 2012 13:39:28 -0700
Subject: ARM: OMAP1: Move plat/tc.h to mach/tc.h for omap1

We cannot keep this in plat as it causes problems
with the ARM single zImage support.

Cc: Felipe Balbi <balbi@ti.com>
Cc: linux-pcmcia@lists.infradead.org
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/pcmcia/omap_cf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c
index fa74efe82206..25c4b1993b3d 100644
--- a/drivers/pcmcia/omap_cf.c
+++ b/drivers/pcmcia/omap_cf.c
@@ -25,7 +25,7 @@
 #include <asm/sizes.h>
 
 #include <mach/mux.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 
 
 /* NOTE:  don't expect this to support many I/O cards.  The 16xx chips have
-- 
cgit v1.2.3


From 1d5aef4950717526d4827e97a916d38d0d73657e Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Wed, 3 Oct 2012 16:36:40 -0700
Subject: ARM: OMAP: Make plat/omap-pm.h local to mach-omap2

We must move this for ARM common zImage support.

Note that neither drivers/media/rc/ir-rx51.c or
drivers/media/platform/omap3isp/ispvideo.c need
to include omap-pm.h, so this patch removes the
include for those files.

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Timo Kokkonen <timo.t.kokkonen@iki.fi>
Cc: linux-media@vger.kernel.org
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/media/rc/ir-rx51.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/media/rc/ir-rx51.c b/drivers/media/rc/ir-rx51.c
index 546199e9ccc7..82e6c1e282d5 100644
--- a/drivers/media/rc/ir-rx51.c
+++ b/drivers/media/rc/ir-rx51.c
@@ -28,7 +28,6 @@
 
 #include <plat/dmtimer.h>
 #include <plat/clock.h>
-#include <plat/omap-pm.h>
 
 #include <media/lirc.h>
 #include <media/lirc_dev.h>
-- 
cgit v1.2.3


From cee4ad1ed90a0959fc29f9d30a2526e5e9522cfa Mon Sep 17 00:00:00 2001
From: Ivo Sieben <meltedpianoman@gmail.com>
Date: Thu, 27 Sep 2012 14:02:05 +0200
Subject: tty: prevent unnecessary work queue lock checking on flip buffer copy

When low_latency flag is set the TTY receive flip buffer is copied to the
line discipline directly instead of using a work queue in the background.
Therefor only in case a workqueue is actually used for copying data to the
line discipline we'll have to flush the workqueue.

This prevents unnecessary spin lock/unlock on the workqueue spin lock that
can cause additional scheduling overhead on a PREEMPT_RT system. On a 200
MHz AT91SAM9261 processor setup this fixes about 100us of scheduling
overhead on the TTY read call.

Signed-off-by: Ivo Sieben <meltedpianoman@gmail.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/tty_buffer.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 91e326ffe7db..8b00f6a34a7d 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -342,6 +342,8 @@ EXPORT_SYMBOL(tty_insert_flip_string_flags);
  *	Takes any pending buffers and transfers their ownership to the
  *	ldisc side of the queue. It then schedules those characters for
  *	processing by the line discipline.
+ *	Note that this function can only be used when the low_latency flag
+ *	is unset. Otherwise the workqueue won't be flushed.
  *
  *	Locking: Takes tty->buf.lock
  */
@@ -514,7 +516,8 @@ static void flush_to_ldisc(struct work_struct *work)
  */
 void tty_flush_to_ldisc(struct tty_struct *tty)
 {
-	flush_work(&tty->buf.work);
+	if (!tty->low_latency)
+		flush_work(&tty->buf.work);
 }
 
 /**
-- 
cgit v1.2.3


From 8fcbaa2b7f5b70dba9ed1c7f91d0a270ce752e2c Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Thu, 18 Oct 2012 22:26:27 +0200
Subject: TTY: devpts, don't care about TTY in devpts_get_tty

The goal is to stop setting and using tty->driver_data in devpts code.
It should be used solely by the driver's code, pty in this case.

First, here we remove TTY from devpts_get_tty and rename it to
devpts_get_priv. Note we do not remove type safety, we just shift the
[implicit] (void *) cast one layer up.

index was unused in devpts_get_tty, so remove that from the prototype
too.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/pty.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index a82b39939a9c..65f767154d12 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -547,7 +547,7 @@ static struct tty_struct *pts_unix98_lookup(struct tty_driver *driver,
 	struct tty_struct *tty;
 
 	mutex_lock(&devpts_mutex);
-	tty = devpts_get_tty(pts_inode, idx);
+	tty = devpts_get_priv(pts_inode);
 	mutex_unlock(&devpts_mutex);
 	/* Master must be open before slave */
 	if (!tty)
-- 
cgit v1.2.3


From 162b97cfa21f816f39ede1944f2a4220e3cf8969 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Thu, 18 Oct 2012 22:26:28 +0200
Subject: TTY: devpts, return created inode from devpts_pty_new

The goal is to stop setting and using tty->driver_data in devpts code.
It should be used solely by the driver's code, pty in this case.

For the cleanup of layering, we will need the inode created in
devpts_pty_new to be stored into slave's driver_data. So we convert
devpts_pty_new to return the inode or an ERR_PTR-encoded error in case
of failure.

The move of 'inode = new_inode(sb);' from declarators to the code is
only cosmetical, but it makes the code easier to read.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/pty.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index 65f767154d12..9985b451e937 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -614,6 +614,7 @@ static const struct tty_operations pty_unix98_ops = {
 static int ptmx_open(struct inode *inode, struct file *filp)
 {
 	struct tty_struct *tty;
+	struct inode *slave_inode;
 	int retval;
 	int index;
 
@@ -650,9 +651,11 @@ static int ptmx_open(struct inode *inode, struct file *filp)
 
 	tty_add_file(tty, filp);
 
-	retval = devpts_pty_new(inode, tty->link);
-	if (retval)
+	slave_inode = devpts_pty_new(inode, tty->link);
+	if (IS_ERR(slave_inode)) {
+		retval = PTR_ERR(slave_inode);
 		goto err_release;
+	}
 
 	retval = ptm_driver->ops->open(tty, filp);
 	if (retval)
-- 
cgit v1.2.3


From f11afb61247016162aa92225a337c1575556c9d9 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Thu, 18 Oct 2012 22:26:29 +0200
Subject: TTY: devpts, do not set driver_data

The goal is to stop setting and using tty->driver_data in devpts code.
It should be used solely by the driver's code, pty in this case.

Now driver_data are managed only in the pty driver. devpts_pty_new is
switched to accept what we used to dig out of tty_struct, i.e. device
node number and index.

This also removes a note about driver_data being set outside of the
driver.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/pty.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

(limited to 'drivers')

diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index 9985b451e937..559e5b27941a 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -4,9 +4,6 @@
  *  Added support for a Unix98-style ptmx device.
  *    -- C. Scott Ananian <cananian@alumni.princeton.edu>, 14-Jan-1998
  *
- *  When reading this code see also fs/devpts. In particular note that the
- *  driver_data field is used by the devpts side as a binding to the devpts
- *  inode.
  */
 
 #include <linux/module.h>
@@ -59,7 +56,7 @@ static void pty_close(struct tty_struct *tty, struct file *filp)
 #ifdef CONFIG_UNIX98_PTYS
 		if (tty->driver == ptm_driver) {
 		        mutex_lock(&devpts_mutex);
-			devpts_pty_kill(tty->link);
+			devpts_pty_kill(tty->link->driver_data);
 		        mutex_unlock(&devpts_mutex);
 		}
 #endif
@@ -651,7 +648,9 @@ static int ptmx_open(struct inode *inode, struct file *filp)
 
 	tty_add_file(tty, filp);
 
-	slave_inode = devpts_pty_new(inode, tty->link);
+	slave_inode = devpts_pty_new(inode,
+			MKDEV(UNIX98_PTY_SLAVE_MAJOR, index), index,
+			tty->link);
 	if (IS_ERR(slave_inode)) {
 		retval = PTR_ERR(slave_inode);
 		goto err_release;
@@ -662,6 +661,7 @@ static int ptmx_open(struct inode *inode, struct file *filp)
 		goto err_release;
 
 	tty_unlock(tty);
+	tty->link->driver_data = slave_inode;
 	return 0;
 err_release:
 	tty_unlock(tty);
-- 
cgit v1.2.3


From fa2ecfc5a68d85624bbd84f7d010860776b7e602 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Thu, 18 Oct 2012 22:26:31 +0200
Subject: TTY: move devpts kill to pty

Now that we have control over tty->driver_data in pty, we can just
kill the /dev/pts/ in pty code too. Namely, in ->shutdown hook of
tty. For pty, this is called only once, for whichever end is closed
last. But we don't care, both driver_data are the inode as it used to
be till now.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/pty.c    | 9 +++++++++
 drivers/tty/tty_io.c | 5 -----
 2 files changed, 9 insertions(+), 5 deletions(-)

(limited to 'drivers')

diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index 559e5b27941a..2728afe52eea 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -363,6 +363,12 @@ err:
 	return retval;
 }
 
+/* this is called once with whichever end is closed last */
+static void pty_unix98_shutdown(struct tty_struct *tty)
+{
+	devpts_kill_index(tty->driver_data, tty->index);
+}
+
 static void pty_cleanup(struct tty_struct *tty)
 {
 	kfree(tty->port);
@@ -578,6 +584,7 @@ static const struct tty_operations ptm_unix98_ops = {
 	.set_termios = pty_set_termios,
 	.ioctl = pty_unix98_ioctl,
 	.resize = pty_resize,
+	.shutdown = pty_unix98_shutdown,
 	.cleanup = pty_cleanup
 };
 
@@ -593,6 +600,7 @@ static const struct tty_operations pty_unix98_ops = {
 	.chars_in_buffer = pty_chars_in_buffer,
 	.unthrottle = pty_unthrottle,
 	.set_termios = pty_set_termios,
+	.shutdown = pty_unix98_shutdown,
 	.cleanup = pty_cleanup,
 };
 
@@ -661,6 +669,7 @@ static int ptmx_open(struct inode *inode, struct file *filp)
 		goto err_release;
 
 	tty_unlock(tty);
+	tty->driver_data = inode;
 	tty->link->driver_data = slave_inode;
 	return 0;
 err_release:
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 2ea176b2280e..e835a5b8d089 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -1625,7 +1625,6 @@ int tty_release(struct inode *inode, struct file *filp)
 	struct tty_struct *tty = file_tty(filp);
 	struct tty_struct *o_tty;
 	int	pty_master, tty_closing, o_tty_closing, do_sleep;
-	int	devpts;
 	int	idx;
 	char	buf[64];
 
@@ -1640,7 +1639,6 @@ int tty_release(struct inode *inode, struct file *filp)
 	idx = tty->index;
 	pty_master = (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
 		      tty->driver->subtype == PTY_TYPE_MASTER);
-	devpts = (tty->driver->flags & TTY_DRIVER_DEVPTS_MEM) != 0;
 	/* Review: parallel close */
 	o_tty = tty->link;
 
@@ -1799,9 +1797,6 @@ int tty_release(struct inode *inode, struct file *filp)
 	release_tty(tty, idx);
 	mutex_unlock(&tty_mutex);
 
-	/* Make this pty number available for reallocation */
-	if (devpts)
-		devpts_kill_index(inode, idx);
 	return 0;
 }
 
-- 
cgit v1.2.3


From 7ee00fdb16418dd5078ec73e4a631c278a366501 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Thu, 18 Oct 2012 22:26:32 +0200
Subject: TTY: vt, fix paste_selection ldisc handling

There used to be a single tty_ldisc_ref_wait. But then, when a
big-tty-mutex (BTM) was introduced, it has to be tty_ldisc_ref +
tty_unlock + tty_ldisc_ref_wait + tty_lock. Later, BTM was removed
from that path and tty_ldisc_ref + tty_ldisc_ref_wait remained there.
But it makes no sense now. So leave there only tty_ldisc_ref_wait.

And when we have a reference to an ldisc, actually use it in the loop.
Otherwise it may be racy.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/vt/selection.c | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

(limited to 'drivers')

diff --git a/drivers/tty/vt/selection.c b/drivers/tty/vt/selection.c
index 8e9b4be97a2d..60b7b6926059 100644
--- a/drivers/tty/vt/selection.c
+++ b/drivers/tty/vt/selection.c
@@ -341,15 +341,11 @@ int paste_selection(struct tty_struct *tty)
 	struct  tty_ldisc *ld;
 	DECLARE_WAITQUEUE(wait, current);
 
-
 	console_lock();
 	poke_blanked_console();
 	console_unlock();
 
-	/* FIXME: wtf is this supposed to achieve ? */
-	ld = tty_ldisc_ref(tty);
-	if (!ld)
-		ld = tty_ldisc_ref_wait(tty);
+	ld = tty_ldisc_ref_wait(tty);
 
 	/* FIXME: this is completely unsafe */
 	add_wait_queue(&vc->paste_wait, &wait);
@@ -361,8 +357,7 @@ int paste_selection(struct tty_struct *tty)
 		}
 		count = sel_buffer_lth - pasted;
 		count = min(count, tty->receive_room);
-		tty->ldisc->ops->receive_buf(tty, sel_buffer + pasted,
-								NULL, count);
+		ld->ops->receive_buf(tty, sel_buffer + pasted, NULL, count);
 		pasted += count;
 	}
 	remove_wait_queue(&vc->paste_wait, &wait);
-- 
cgit v1.2.3


From 31e121284f90bf559618330e230b286f969b6b7f Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Thu, 18 Oct 2012 22:26:33 +0200
Subject: TTY: ldisc, wait for idle ldisc in release

We reintroduced tty_ldisc_wait_idle in 100eeae2c5c (TTY: restore
tty_ldisc_wait_idle) and used in set_ldisc. Then we added it also to
the hangup path in 92f6fa09bd453 (TTY: ldisc, do not close until there
are readers). And we noted that there is one more path:
~   Before 65b770468e98 tty_ldisc_wait_idle was called also from
~   tty_ldisc_release. It is called from tty_release, so I don't think
~   we need to restore that one.

Well, I was wrong. There might still be holders of an ldisc
reference. Not from userspace, but drivers. If they take a reference
and a user closes the device immediately after that, we have a
problem. ldisc is halted and closed by TTY, but the driver still may
call some ldisc's operation and cause a crash.

So restore the tty_ldisc_wait_idle call also to the third location
where it was before 65b770468e98 (tty-ldisc: turn ldisc user count
into a proper refcount). Now we should be safe with respect to the
ldisc reference counting as all* tty_ldisc_close paths are safely
called with reference count of one.

* Not the one in tty_ldisc_setup's fail path. But that is called
  before the first open finishes. So userspace does not see it yet.
  Even thought the driver is given the TTY already via ->install, it
  should not take a reference to the ldisc yet. If some driver is to
  do this, we should put one tty_ldisc_wait_idle also in the setup.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/tty_ldisc.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'drivers')

diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 0f2a2c5e704c..47e3968df10b 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -897,6 +897,11 @@ int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty)
 
 static void tty_ldisc_kill(struct tty_struct *tty)
 {
+	/* There cannot be users from userspace now. But there still might be
+	 * drivers holding a reference via tty_ldisc_ref. Do not steal them the
+	 * ldisc until they are done. */
+	tty_ldisc_wait_idle(tty, MAX_SCHEDULE_TIMEOUT);
+
 	mutex_lock(&tty->ldisc_mutex);
 	/*
 	 * Now kill off the ldisc
-- 
cgit v1.2.3


From f327b340e35b210c936cd109544e672aa7a0e49d Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Thu, 18 Oct 2012 22:26:34 +0200
Subject: TTY: hci_ldisc, remove invalid check in open

hci_ldisc's open checks if tty_struct->disc_data is set. And if so it
returns with an error. But nothing ensures disc_data to be NULL. And
since ld->ops->open shall be called only once, we do not need the
check at all. So remove it.

Note that this is not an issue now, but n_tty will start using the
disc_data pointer and this invalid 'if' would trigger then rendering
TTYs over BT unusable.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: linux-bluetooth@vger.kernel.org
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/bluetooth/hci_ldisc.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

(limited to 'drivers')

diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index c8abce3d2d9c..ed0fade46aed 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -270,15 +270,10 @@ static int hci_uart_send_frame(struct sk_buff *skb)
  */
 static int hci_uart_tty_open(struct tty_struct *tty)
 {
-	struct hci_uart *hu = (void *) tty->disc_data;
+	struct hci_uart *hu;
 
 	BT_DBG("tty %p", tty);
 
-	/* FIXME: This btw is bogus, nothing requires the old ldisc to clear
-	   the pointer */
-	if (hu)
-		return -EEXIST;
-
 	/* Error if the tty has no write op instead of leaving an exploitable
 	   hole */
 	if (tty->ops->write == NULL)
-- 
cgit v1.2.3


From b91939f528fa80e95a7e9592425dd1026d159b2a Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Thu, 18 Oct 2012 22:26:35 +0200
Subject: TTY: n_tty, simplify read_buf+echo_buf allocation

ldisc->open and close are called only once and cannot cross. So the
tests in open and close are superfluous. Remove them. (But leave sets
to NULL to ensure there is not a bug somewhere.)

And when the tests are gone, handle properly failures in open. We
leaked read_buf if allocation of echo_buf failed before. Now this is
not the case anymore.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/n_tty.c | 31 +++++++++++++------------------
 1 file changed, 13 insertions(+), 18 deletions(-)

(limited to 'drivers')

diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 8c0b7b42319c..f27289d910b2 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1561,14 +1561,10 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
 static void n_tty_close(struct tty_struct *tty)
 {
 	n_tty_flush_buffer(tty);
-	if (tty->read_buf) {
-		kfree(tty->read_buf);
-		tty->read_buf = NULL;
-	}
-	if (tty->echo_buf) {
-		kfree(tty->echo_buf);
-		tty->echo_buf = NULL;
-	}
+	kfree(tty->read_buf);
+	kfree(tty->echo_buf);
+	tty->read_buf = NULL;
+	tty->echo_buf = NULL;
 }
 
 /**
@@ -1587,17 +1583,11 @@ static int n_tty_open(struct tty_struct *tty)
 		return -EINVAL;
 
 	/* These are ugly. Currently a malloc failure here can panic */
-	if (!tty->read_buf) {
-		tty->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
-		if (!tty->read_buf)
-			return -ENOMEM;
-	}
-	if (!tty->echo_buf) {
-		tty->echo_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
+	tty->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
+	tty->echo_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
+	if (!tty->read_buf || !tty->echo_buf)
+		goto err_free_bufs;
 
-		if (!tty->echo_buf)
-			return -ENOMEM;
-	}
 	reset_buffer_flags(tty);
 	tty_unthrottle(tty);
 	tty->column = 0;
@@ -1605,6 +1595,11 @@ static int n_tty_open(struct tty_struct *tty)
 	tty->minimum_to_wake = 1;
 	tty->closing = 0;
 	return 0;
+err_free_bufs:
+	kfree(tty->read_buf);
+	kfree(tty->echo_buf);
+
+	return -ENOMEM;
 }
 
 static inline int input_available_p(struct tty_struct *tty, int amt)
-- 
cgit v1.2.3


From 3383427a7b325e50af03d6f42b9587ca66d941a6 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Thu, 18 Oct 2012 22:26:36 +0200
Subject: TTY: n_tty, remove bogus checks

* BUG_ON(!tty) in n_tty_set_termios -- it cannot be called with tty ==
  NULL. It is called from two call sites. First, from n_tty_open where
  we have a valid tty. Second, as ld->ops->set_termios from
  tty_set_termios. But there we have a valid tty too.
* if (!tty) in n_tty_open -- why would the TTY layer call ldisc's
  open with an invalid TTY? No it indeed does not. All call sites have
  a tty and dereference that.
* BUG_ON(!tty->read_buf) in n_tty_read -- this used to be a valid
  check. The ldisc handling was broken some time ago when I added the
  check to ensure everything is OK. It still can catch the case, but
  no later than we move the buffer to ldisc data. Then there will be
  no read_buf in tty_struct, i.e. nothing to check for.
* if (!tty->read_buf) in n_tty_receive_buf -- this should never
  happen. All callers of ldisc->ops->receive_ops should hold a
  reference to an ldisc and close (which frees read_buf) cannot be
  called until the reference is dropped.
* if (WARN_ON(!tty->read_buf)) in n_tty_read -- the same as in the
  previous case.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/n_tty.c | 12 ------------
 1 file changed, 12 deletions(-)

(limited to 'drivers')

diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index f27289d910b2..ceae0744cbb8 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1375,9 +1375,6 @@ static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
 	char	buf[64];
 	unsigned long cpuflags;
 
-	if (!tty->read_buf)
-		return;
-
 	if (tty->real_raw) {
 		spin_lock_irqsave(&tty->read_lock, cpuflags);
 		i = min(N_TTY_BUF_SIZE - tty->read_cnt,
@@ -1471,7 +1468,6 @@ int is_ignored(int sig)
 static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
 {
 	int canon_change = 1;
-	BUG_ON(!tty);
 
 	if (old)
 		canon_change = (old->c_lflag ^ tty->termios.c_lflag) & ICANON;
@@ -1579,9 +1575,6 @@ static void n_tty_close(struct tty_struct *tty)
 
 static int n_tty_open(struct tty_struct *tty)
 {
-	if (!tty)
-		return -EINVAL;
-
 	/* These are ugly. Currently a malloc failure here can panic */
 	tty->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
 	tty->echo_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
@@ -1736,10 +1729,6 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
 	int packet;
 
 do_it_again:
-
-	if (WARN_ON(!tty->read_buf))
-		return -EAGAIN;
-
 	c = job_control(tty, file);
 	if (c < 0)
 		return c;
@@ -1825,7 +1814,6 @@ do_it_again:
 			/* FIXME: does n_tty_set_room need locking ? */
 			n_tty_set_room(tty);
 			timeout = schedule_timeout(timeout);
-			BUG_ON(!tty->read_buf);
 			continue;
 		}
 		__set_current_state(TASK_RUNNING);
-- 
cgit v1.2.3


From 6c633f27ccf783e9a782b84e34aeaeb7949a3359 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Thu, 18 Oct 2012 22:26:37 +0200
Subject: TTY: audit, stop accessing tty->icount

This is a private member of n_tty. Stop accessing it. Instead, take is
as an argument.

This is needed to allow clean switch of the private members to a
separate private structure of n_tty.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/n_tty.c     |  5 +++--
 drivers/tty/tty_audit.c | 15 ++++++++-------
 2 files changed, 11 insertions(+), 9 deletions(-)

(limited to 'drivers')

diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index ceae0744cbb8..3ebab0cfceb2 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -76,7 +76,7 @@
 static inline int tty_put_user(struct tty_struct *tty, unsigned char x,
 			       unsigned char __user *ptr)
 {
-	tty_audit_add_data(tty, &x, 1);
+	tty_audit_add_data(tty, &x, 1, tty->icanon);
 	return put_user(x, ptr);
 }
 
@@ -1644,7 +1644,8 @@ static int copy_from_read_buf(struct tty_struct *tty,
 		n -= retval;
 		is_eof = n == 1 &&
 			tty->read_buf[tty->read_tail] == EOF_CHAR(tty);
-		tty_audit_add_data(tty, &tty->read_buf[tty->read_tail], n);
+		tty_audit_add_data(tty, &tty->read_buf[tty->read_tail], n,
+				tty->icanon);
 		spin_lock_irqsave(&tty->read_lock, flags);
 		tty->read_tail = (tty->read_tail + n) & (N_TTY_BUF_SIZE-1);
 		tty->read_cnt -= n;
diff --git a/drivers/tty/tty_audit.c b/drivers/tty/tty_audit.c
index b0b39b823ccf..6953dc82850c 100644
--- a/drivers/tty/tty_audit.c
+++ b/drivers/tty/tty_audit.c
@@ -23,7 +23,7 @@ struct tty_audit_buf {
 };
 
 static struct tty_audit_buf *tty_audit_buf_alloc(int major, int minor,
-						 int icanon)
+						 unsigned icanon)
 {
 	struct tty_audit_buf *buf;
 
@@ -239,7 +239,8 @@ int tty_audit_push_task(struct task_struct *tsk, kuid_t loginuid, u32 sessionid)
  *	if TTY auditing is disabled or out of memory.  Otherwise, return a new
  *	reference to the buffer.
  */
-static struct tty_audit_buf *tty_audit_buf_get(struct tty_struct *tty)
+static struct tty_audit_buf *tty_audit_buf_get(struct tty_struct *tty,
+		unsigned icanon)
 {
 	struct tty_audit_buf *buf, *buf2;
 
@@ -257,7 +258,7 @@ static struct tty_audit_buf *tty_audit_buf_get(struct tty_struct *tty)
 
 	buf2 = tty_audit_buf_alloc(tty->driver->major,
 				   tty->driver->minor_start + tty->index,
-				   tty->icanon);
+				   icanon);
 	if (buf2 == NULL) {
 		audit_log_lost("out of memory in TTY auditing");
 		return NULL;
@@ -287,7 +288,7 @@ static struct tty_audit_buf *tty_audit_buf_get(struct tty_struct *tty)
  *	Audit @data of @size from @tty, if necessary.
  */
 void tty_audit_add_data(struct tty_struct *tty, unsigned char *data,
-			size_t size)
+			size_t size, unsigned icanon)
 {
 	struct tty_audit_buf *buf;
 	int major, minor;
@@ -299,7 +300,7 @@ void tty_audit_add_data(struct tty_struct *tty, unsigned char *data,
 	    && tty->driver->subtype == PTY_TYPE_MASTER)
 		return;
 
-	buf = tty_audit_buf_get(tty);
+	buf = tty_audit_buf_get(tty, icanon);
 	if (!buf)
 		return;
 
@@ -307,11 +308,11 @@ void tty_audit_add_data(struct tty_struct *tty, unsigned char *data,
 	major = tty->driver->major;
 	minor = tty->driver->minor_start + tty->index;
 	if (buf->major != major || buf->minor != minor
-	    || buf->icanon != tty->icanon) {
+	    || buf->icanon != icanon) {
 		tty_audit_buf_push_current(buf);
 		buf->major = major;
 		buf->minor = minor;
-		buf->icanon = tty->icanon;
+		buf->icanon = icanon;
 	}
 	do {
 		size_t run;
-- 
cgit v1.2.3


From 70ece7a731598ac760c2a34421fcb2de18d2713f Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Thu, 18 Oct 2012 22:26:38 +0200
Subject: TTY: n_tty, add ldisc data to n_tty

All n_tty related members from tty_struct will be moved here.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/n_tty.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 3ebab0cfceb2..3d1594e10d00 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -73,6 +73,10 @@
 #define ECHO_OP_SET_CANON_COL 0x81
 #define ECHO_OP_ERASE_TAB 0x82
 
+struct n_tty_data {
+	char dummy;
+};
+
 static inline int tty_put_user(struct tty_struct *tty, unsigned char x,
 			       unsigned char __user *ptr)
 {
@@ -1556,11 +1560,15 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
 
 static void n_tty_close(struct tty_struct *tty)
 {
+	struct n_tty_data *ldata = tty->disc_data;
+
 	n_tty_flush_buffer(tty);
 	kfree(tty->read_buf);
 	kfree(tty->echo_buf);
+	kfree(ldata);
 	tty->read_buf = NULL;
 	tty->echo_buf = NULL;
+	tty->disc_data = NULL;
 }
 
 /**
@@ -1575,23 +1583,32 @@ static void n_tty_close(struct tty_struct *tty)
 
 static int n_tty_open(struct tty_struct *tty)
 {
+	struct n_tty_data *ldata;
+
+	ldata = kzalloc(sizeof(*ldata), GFP_KERNEL);
+	if (!ldata)
+		goto err;
+
 	/* These are ugly. Currently a malloc failure here can panic */
 	tty->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
 	tty->echo_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
 	if (!tty->read_buf || !tty->echo_buf)
 		goto err_free_bufs;
 
+	tty->disc_data = ldata;
 	reset_buffer_flags(tty);
 	tty_unthrottle(tty);
 	tty->column = 0;
 	n_tty_set_termios(tty, NULL);
 	tty->minimum_to_wake = 1;
 	tty->closing = 0;
+
 	return 0;
 err_free_bufs:
 	kfree(tty->read_buf);
 	kfree(tty->echo_buf);
-
+	kfree(ldata);
+err:
 	return -ENOMEM;
 }
 
-- 
cgit v1.2.3


From 53c5ee2cfb4dadc4f5c24fe671e2fbfc034c875e Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Thu, 18 Oct 2012 22:26:39 +0200
Subject: TTY: move ldisc data from tty_struct: simple members

Here we start moving all the n_tty related bits from tty_struct to
the newly defined n_tty_data struct in n_tty proper.

In this patch primitive members and bits are moved. The rest will be
done per-partes in the next patches.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/n_tty.c  | 160 ++++++++++++++++++++++++++++++---------------------
 drivers/tty/tty_io.c |   1 -
 2 files changed, 93 insertions(+), 68 deletions(-)

(limited to 'drivers')

diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 3d1594e10d00..bd775a7c0629 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -74,13 +74,20 @@
 #define ECHO_OP_ERASE_TAB 0x82
 
 struct n_tty_data {
-	char dummy;
+	unsigned int column;
+	unsigned long overrun_time;
+	int num_overrun;
+
+	unsigned char lnext:1, erasing:1, raw:1, real_raw:1, icanon:1;
+	unsigned char echo_overrun:1;
 };
 
 static inline int tty_put_user(struct tty_struct *tty, unsigned char x,
 			       unsigned char __user *ptr)
 {
-	tty_audit_add_data(tty, &x, 1, tty->icanon);
+	struct n_tty_data *ldata = tty->disc_data;
+
+	tty_audit_add_data(tty, &x, 1, ldata->icanon);
 	return put_user(x, ptr);
 }
 
@@ -96,6 +103,7 @@ static inline int tty_put_user(struct tty_struct *tty, unsigned char x,
 
 static void n_tty_set_room(struct tty_struct *tty)
 {
+	struct n_tty_data *ldata = tty->disc_data;
 	int left;
 	int old_left;
 
@@ -115,7 +123,7 @@ static void n_tty_set_room(struct tty_struct *tty)
 	 * characters will be beeped.
 	 */
 	if (left <= 0)
-		left = tty->icanon && !tty->canon_data;
+		left = ldata->icanon && !tty->canon_data;
 	old_left = tty->receive_room;
 	tty->receive_room = left;
 
@@ -183,6 +191,7 @@ static void check_unthrottle(struct tty_struct *tty)
 
 static void reset_buffer_flags(struct tty_struct *tty)
 {
+	struct n_tty_data *ldata = tty->disc_data;
 	unsigned long flags;
 
 	spin_lock_irqsave(&tty->read_lock, flags);
@@ -190,10 +199,10 @@ static void reset_buffer_flags(struct tty_struct *tty)
 	spin_unlock_irqrestore(&tty->read_lock, flags);
 
 	mutex_lock(&tty->echo_lock);
-	tty->echo_pos = tty->echo_cnt = tty->echo_overrun = 0;
+	tty->echo_pos = tty->echo_cnt = ldata->echo_overrun = 0;
 	mutex_unlock(&tty->echo_lock);
 
-	tty->canon_head = tty->canon_data = tty->erasing = 0;
+	tty->canon_head = tty->canon_data = ldata->erasing = 0;
 	memset(&tty->read_flags, 0, sizeof tty->read_flags);
 	n_tty_set_room(tty);
 }
@@ -239,11 +248,12 @@ static void n_tty_flush_buffer(struct tty_struct *tty)
 
 static ssize_t n_tty_chars_in_buffer(struct tty_struct *tty)
 {
+	struct n_tty_data *ldata = tty->disc_data;
 	unsigned long flags;
 	ssize_t n = 0;
 
 	spin_lock_irqsave(&tty->read_lock, flags);
-	if (!tty->icanon) {
+	if (!ldata->icanon) {
 		n = tty->read_cnt;
 	} else if (tty->canon_data) {
 		n = (tty->canon_head > tty->read_tail) ?
@@ -305,6 +315,7 @@ static inline int is_continuation(unsigned char c, struct tty_struct *tty)
 
 static int do_output_char(unsigned char c, struct tty_struct *tty, int space)
 {
+	struct n_tty_data *ldata = tty->disc_data;
 	int	spaces;
 
 	if (!space)
@@ -313,48 +324,48 @@ static int do_output_char(unsigned char c, struct tty_struct *tty, int space)
 	switch (c) {
 	case '\n':
 		if (O_ONLRET(tty))
-			tty->column = 0;
+			ldata->column = 0;
 		if (O_ONLCR(tty)) {
 			if (space < 2)
 				return -1;
-			tty->canon_column = tty->column = 0;
+			tty->canon_column = ldata->column = 0;
 			tty->ops->write(tty, "\r\n", 2);
 			return 2;
 		}
-		tty->canon_column = tty->column;
+		tty->canon_column = ldata->column;
 		break;
 	case '\r':
-		if (O_ONOCR(tty) && tty->column == 0)
+		if (O_ONOCR(tty) && ldata->column == 0)
 			return 0;
 		if (O_OCRNL(tty)) {
 			c = '\n';
 			if (O_ONLRET(tty))
-				tty->canon_column = tty->column = 0;
+				tty->canon_column = ldata->column = 0;
 			break;
 		}
-		tty->canon_column = tty->column = 0;
+		tty->canon_column = ldata->column = 0;
 		break;
 	case '\t':
-		spaces = 8 - (tty->column & 7);
+		spaces = 8 - (ldata->column & 7);
 		if (O_TABDLY(tty) == XTABS) {
 			if (space < spaces)
 				return -1;
-			tty->column += spaces;
+			ldata->column += spaces;
 			tty->ops->write(tty, "        ", spaces);
 			return spaces;
 		}
-		tty->column += spaces;
+		ldata->column += spaces;
 		break;
 	case '\b':
-		if (tty->column > 0)
-			tty->column--;
+		if (ldata->column > 0)
+			ldata->column--;
 		break;
 	default:
 		if (!iscntrl(c)) {
 			if (O_OLCUC(tty))
 				c = toupper(c);
 			if (!is_continuation(c, tty))
-				tty->column++;
+				ldata->column++;
 		}
 		break;
 	}
@@ -415,6 +426,7 @@ static int process_output(unsigned char c, struct tty_struct *tty)
 static ssize_t process_output_block(struct tty_struct *tty,
 				    const unsigned char *buf, unsigned int nr)
 {
+	struct n_tty_data *ldata = tty->disc_data;
 	int	space;
 	int	i;
 	const unsigned char *cp;
@@ -435,30 +447,30 @@ static ssize_t process_output_block(struct tty_struct *tty,
 		switch (c) {
 		case '\n':
 			if (O_ONLRET(tty))
-				tty->column = 0;
+				ldata->column = 0;
 			if (O_ONLCR(tty))
 				goto break_out;
-			tty->canon_column = tty->column;
+			tty->canon_column = ldata->column;
 			break;
 		case '\r':
-			if (O_ONOCR(tty) && tty->column == 0)
+			if (O_ONOCR(tty) && ldata->column == 0)
 				goto break_out;
 			if (O_OCRNL(tty))
 				goto break_out;
-			tty->canon_column = tty->column = 0;
+			tty->canon_column = ldata->column = 0;
 			break;
 		case '\t':
 			goto break_out;
 		case '\b':
-			if (tty->column > 0)
-				tty->column--;
+			if (ldata->column > 0)
+				ldata->column--;
 			break;
 		default:
 			if (!iscntrl(c)) {
 				if (O_OLCUC(tty))
 					goto break_out;
 				if (!is_continuation(c, tty))
-					tty->column++;
+					ldata->column++;
 			}
 			break;
 		}
@@ -498,6 +510,7 @@ break_out:
 
 static void process_echoes(struct tty_struct *tty)
 {
+	struct n_tty_data *ldata = tty->disc_data;
 	int	space, nr;
 	unsigned char c;
 	unsigned char *cp, *buf_end;
@@ -559,22 +572,22 @@ static void process_echoes(struct tty_struct *tty)
 				space -= num_bs;
 				while (num_bs--) {
 					tty_put_char(tty, '\b');
-					if (tty->column > 0)
-						tty->column--;
+					if (ldata->column > 0)
+						ldata->column--;
 				}
 				cp += 3;
 				nr -= 3;
 				break;
 
 			case ECHO_OP_SET_CANON_COL:
-				tty->canon_column = tty->column;
+				tty->canon_column = ldata->column;
 				cp += 2;
 				nr -= 2;
 				break;
 
 			case ECHO_OP_MOVE_BACK_COL:
-				if (tty->column > 0)
-					tty->column--;
+				if (ldata->column > 0)
+					ldata->column--;
 				cp += 2;
 				nr -= 2;
 				break;
@@ -586,7 +599,7 @@ static void process_echoes(struct tty_struct *tty)
 					break;
 				}
 				tty_put_char(tty, ECHO_OP_START);
-				tty->column++;
+				ldata->column++;
 				space--;
 				cp += 2;
 				nr -= 2;
@@ -608,7 +621,7 @@ static void process_echoes(struct tty_struct *tty)
 				}
 				tty_put_char(tty, '^');
 				tty_put_char(tty, op ^ 0100);
-				tty->column += 2;
+				ldata->column += 2;
 				space -= 2;
 				cp += 2;
 				nr -= 2;
@@ -641,14 +654,14 @@ static void process_echoes(struct tty_struct *tty)
 	if (nr == 0) {
 		tty->echo_pos = 0;
 		tty->echo_cnt = 0;
-		tty->echo_overrun = 0;
+		ldata->echo_overrun = 0;
 	} else {
 		int num_processed = tty->echo_cnt - nr;
 		tty->echo_pos += num_processed;
 		tty->echo_pos &= N_TTY_BUF_SIZE - 1;
 		tty->echo_cnt = nr;
 		if (num_processed > 0)
-			tty->echo_overrun = 0;
+			ldata->echo_overrun = 0;
 	}
 
 	mutex_unlock(&tty->echo_lock);
@@ -670,6 +683,7 @@ static void process_echoes(struct tty_struct *tty)
 
 static void add_echo_byte(unsigned char c, struct tty_struct *tty)
 {
+	struct n_tty_data *ldata = tty->disc_data;
 	int	new_byte_pos;
 
 	if (tty->echo_cnt == N_TTY_BUF_SIZE) {
@@ -695,7 +709,7 @@ static void add_echo_byte(unsigned char c, struct tty_struct *tty)
 		}
 		tty->echo_pos &= N_TTY_BUF_SIZE - 1;
 
-		tty->echo_overrun = 1;
+		ldata->echo_overrun = 1;
 	} else {
 		new_byte_pos = tty->echo_pos + tty->echo_cnt;
 		new_byte_pos &= N_TTY_BUF_SIZE - 1;
@@ -845,9 +859,10 @@ static void echo_char(unsigned char c, struct tty_struct *tty)
 
 static inline void finish_erasing(struct tty_struct *tty)
 {
-	if (tty->erasing) {
+	struct n_tty_data *ldata = tty->disc_data;
+	if (ldata->erasing) {
 		echo_char_raw('/', tty);
-		tty->erasing = 0;
+		ldata->erasing = 0;
 	}
 }
 
@@ -865,6 +880,7 @@ static inline void finish_erasing(struct tty_struct *tty)
 
 static void eraser(unsigned char c, struct tty_struct *tty)
 {
+	struct n_tty_data *ldata = tty->disc_data;
 	enum { ERASE, WERASE, KILL } kill_type;
 	int head, seen_alnums, cnt;
 	unsigned long flags;
@@ -932,9 +948,9 @@ static void eraser(unsigned char c, struct tty_struct *tty)
 		spin_unlock_irqrestore(&tty->read_lock, flags);
 		if (L_ECHO(tty)) {
 			if (L_ECHOPRT(tty)) {
-				if (!tty->erasing) {
+				if (!ldata->erasing) {
 					echo_char_raw('\\', tty);
-					tty->erasing = 1;
+					ldata->erasing = 1;
 				}
 				/* if cnt > 1, output a multi-byte character */
 				echo_char(c, tty);
@@ -1056,16 +1072,17 @@ static inline void n_tty_receive_break(struct tty_struct *tty)
 
 static inline void n_tty_receive_overrun(struct tty_struct *tty)
 {
+	struct n_tty_data *ldata = tty->disc_data;
 	char buf[64];
 
-	tty->num_overrun++;
-	if (time_before(tty->overrun_time, jiffies - HZ) ||
-			time_after(tty->overrun_time, jiffies)) {
+	ldata->num_overrun++;
+	if (time_after(jiffies, ldata->overrun_time + HZ) ||
+			time_after(ldata->overrun_time, jiffies)) {
 		printk(KERN_WARNING "%s: %d input overrun(s)\n",
 			tty_name(tty, buf),
-			tty->num_overrun);
-		tty->overrun_time = jiffies;
-		tty->num_overrun = 0;
+			ldata->num_overrun);
+		ldata->overrun_time = jiffies;
+		ldata->num_overrun = 0;
 	}
 }
 
@@ -1105,10 +1122,11 @@ static inline void n_tty_receive_parity_error(struct tty_struct *tty,
 
 static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
 {
+	struct n_tty_data *ldata = tty->disc_data;
 	unsigned long flags;
 	int parmrk;
 
-	if (tty->raw) {
+	if (ldata->raw) {
 		put_tty_queue(c, tty);
 		return;
 	}
@@ -1147,8 +1165,8 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
 	 * handle specially, do shortcut processing to speed things
 	 * up.
 	 */
-	if (!test_bit(c, tty->process_char_map) || tty->lnext) {
-		tty->lnext = 0;
+	if (!test_bit(c, tty->process_char_map) || ldata->lnext) {
+		ldata->lnext = 0;
 		parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
 		if (tty->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) {
 			/* beep if no space */
@@ -1222,7 +1240,7 @@ send_signal:
 	} else if (c == '\n' && I_INLCR(tty))
 		c = '\r';
 
-	if (tty->icanon) {
+	if (ldata->icanon) {
 		if (c == ERASE_CHAR(tty) || c == KILL_CHAR(tty) ||
 		    (c == WERASE_CHAR(tty) && L_IEXTEN(tty))) {
 			eraser(c, tty);
@@ -1230,7 +1248,7 @@ send_signal:
 			return;
 		}
 		if (c == LNEXT_CHAR(tty) && L_IEXTEN(tty)) {
-			tty->lnext = 1;
+			ldata->lnext = 1;
 			if (L_ECHO(tty)) {
 				finish_erasing(tty);
 				if (L_ECHOCTL(tty)) {
@@ -1373,13 +1391,14 @@ static void n_tty_write_wakeup(struct tty_struct *tty)
 static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
 			      char *fp, int count)
 {
+	struct n_tty_data *ldata = tty->disc_data;
 	const unsigned char *p;
 	char *f, flags = TTY_NORMAL;
 	int	i;
 	char	buf[64];
 	unsigned long cpuflags;
 
-	if (tty->real_raw) {
+	if (ldata->real_raw) {
 		spin_lock_irqsave(&tty->read_lock, cpuflags);
 		i = min(N_TTY_BUF_SIZE - tty->read_cnt,
 			N_TTY_BUF_SIZE - tty->read_head);
@@ -1427,7 +1446,7 @@ static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
 
 	n_tty_set_room(tty);
 
-	if ((!tty->icanon && (tty->read_cnt >= tty->minimum_to_wake)) ||
+	if ((!ldata->icanon && (tty->read_cnt >= tty->minimum_to_wake)) ||
 		L_EXTPROC(tty)) {
 		kill_fasync(&tty->fasync, SIGIO, POLL_IN);
 		if (waitqueue_active(&tty->read_wait))
@@ -1471,6 +1490,7 @@ int is_ignored(int sig)
 
 static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
 {
+	struct n_tty_data *ldata = tty->disc_data;
 	int canon_change = 1;
 
 	if (old)
@@ -1479,16 +1499,16 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
 		memset(&tty->read_flags, 0, sizeof tty->read_flags);
 		tty->canon_head = tty->read_tail;
 		tty->canon_data = 0;
-		tty->erasing = 0;
+		ldata->erasing = 0;
 	}
 
 	if (canon_change && !L_ICANON(tty) && tty->read_cnt)
 		wake_up_interruptible(&tty->read_wait);
 
-	tty->icanon = (L_ICANON(tty) != 0);
+	ldata->icanon = (L_ICANON(tty) != 0);
 	if (test_bit(TTY_HW_COOK_IN, &tty->flags)) {
-		tty->raw = 1;
-		tty->real_raw = 1;
+		ldata->raw = 1;
+		ldata->real_raw = 1;
 		n_tty_set_room(tty);
 		return;
 	}
@@ -1531,16 +1551,16 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
 			set_bit(SUSP_CHAR(tty), tty->process_char_map);
 		}
 		clear_bit(__DISABLED_CHAR, tty->process_char_map);
-		tty->raw = 0;
-		tty->real_raw = 0;
+		ldata->raw = 0;
+		ldata->real_raw = 0;
 	} else {
-		tty->raw = 1;
+		ldata->raw = 1;
 		if ((I_IGNBRK(tty) || (!I_BRKINT(tty) && !I_PARMRK(tty))) &&
 		    (I_IGNPAR(tty) || !I_INPCK(tty)) &&
 		    (tty->driver->flags & TTY_DRIVER_REAL_RAW))
-			tty->real_raw = 1;
+			ldata->real_raw = 1;
 		else
-			tty->real_raw = 0;
+			ldata->real_raw = 0;
 	}
 	n_tty_set_room(tty);
 	/* The termios change make the tty ready for I/O */
@@ -1589,6 +1609,8 @@ static int n_tty_open(struct tty_struct *tty)
 	if (!ldata)
 		goto err;
 
+	ldata->overrun_time = jiffies;
+
 	/* These are ugly. Currently a malloc failure here can panic */
 	tty->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
 	tty->echo_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
@@ -1598,7 +1620,7 @@ static int n_tty_open(struct tty_struct *tty)
 	tty->disc_data = ldata;
 	reset_buffer_flags(tty);
 	tty_unthrottle(tty);
-	tty->column = 0;
+	ldata->column = 0;
 	n_tty_set_termios(tty, NULL);
 	tty->minimum_to_wake = 1;
 	tty->closing = 0;
@@ -1614,8 +1636,10 @@ err:
 
 static inline int input_available_p(struct tty_struct *tty, int amt)
 {
+	struct n_tty_data *ldata = tty->disc_data;
+
 	tty_flush_to_ldisc(tty);
-	if (tty->icanon && !L_EXTPROC(tty)) {
+	if (ldata->icanon && !L_EXTPROC(tty)) {
 		if (tty->canon_data)
 			return 1;
 	} else if (tty->read_cnt >= (amt ? amt : 1))
@@ -1646,6 +1670,7 @@ static int copy_from_read_buf(struct tty_struct *tty,
 				      size_t *nr)
 
 {
+	struct n_tty_data *ldata = tty->disc_data;
 	int retval;
 	size_t n;
 	unsigned long flags;
@@ -1662,12 +1687,12 @@ static int copy_from_read_buf(struct tty_struct *tty,
 		is_eof = n == 1 &&
 			tty->read_buf[tty->read_tail] == EOF_CHAR(tty);
 		tty_audit_add_data(tty, &tty->read_buf[tty->read_tail], n,
-				tty->icanon);
+				ldata->icanon);
 		spin_lock_irqsave(&tty->read_lock, flags);
 		tty->read_tail = (tty->read_tail + n) & (N_TTY_BUF_SIZE-1);
 		tty->read_cnt -= n;
 		/* Turn single EOF into zero-length read */
-		if (L_EXTPROC(tty) && tty->icanon && is_eof && !tty->read_cnt)
+		if (L_EXTPROC(tty) && ldata->icanon && is_eof && !tty->read_cnt)
 			n = 0;
 		spin_unlock_irqrestore(&tty->read_lock, flags);
 		*b += n;
@@ -1736,6 +1761,7 @@ static int job_control(struct tty_struct *tty, struct file *file)
 static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
 			 unsigned char __user *buf, size_t nr)
 {
+	struct n_tty_data *ldata = tty->disc_data;
 	unsigned char __user *b = buf;
 	DECLARE_WAITQUEUE(wait, current);
 	int c;
@@ -1753,7 +1779,7 @@ do_it_again:
 
 	minimum = time = 0;
 	timeout = MAX_SCHEDULE_TIMEOUT;
-	if (!tty->icanon) {
+	if (!ldata->icanon) {
 		time = (HZ / 10) * TIME_CHAR(tty);
 		minimum = MIN_CHAR(tty);
 		if (minimum) {
@@ -1846,7 +1872,7 @@ do_it_again:
 			nr--;
 		}
 
-		if (tty->icanon && !L_EXTPROC(tty)) {
+		if (ldata->icanon && !L_EXTPROC(tty)) {
 			/* N.B. avoid overrun if nr == 0 */
 			spin_lock_irqsave(&tty->read_lock, flags);
 			while (nr && tty->read_cnt) {
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index e835a5b8d089..67b024ca16ec 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -2932,7 +2932,6 @@ void initialize_tty_struct(struct tty_struct *tty,
 	tty_ldisc_init(tty);
 	tty->session = NULL;
 	tty->pgrp = NULL;
-	tty->overrun_time = jiffies;
 	tty_buffer_init(tty);
 	mutex_init(&tty->legacy_mutex);
 	mutex_init(&tty->termios_mutex);
-- 
cgit v1.2.3


From 3fe780b379fac2e1eeb5907ee7c864756ce7ec83 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Thu, 18 Oct 2012 22:26:40 +0200
Subject: TTY: move ldisc data from tty_struct: bitmaps

Here we move bitmaps and use DECLARE_BITMAP to declare them in the new
structure. And instead of memset, we use bitmap_zero as it is more
appropriate.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/n_tty.c | 52 ++++++++++++++++++++++++++++------------------------
 1 file changed, 28 insertions(+), 24 deletions(-)

(limited to 'drivers')

diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index bd775a7c0629..702dd4adbdc9 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -80,6 +80,9 @@ struct n_tty_data {
 
 	unsigned char lnext:1, erasing:1, raw:1, real_raw:1, icanon:1;
 	unsigned char echo_overrun:1;
+
+	DECLARE_BITMAP(process_char_map, 256);
+	DECLARE_BITMAP(read_flags, N_TTY_BUF_SIZE);
 };
 
 static inline int tty_put_user(struct tty_struct *tty, unsigned char x,
@@ -203,7 +206,7 @@ static void reset_buffer_flags(struct tty_struct *tty)
 	mutex_unlock(&tty->echo_lock);
 
 	tty->canon_head = tty->canon_data = ldata->erasing = 0;
-	memset(&tty->read_flags, 0, sizeof tty->read_flags);
+	bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE);
 	n_tty_set_room(tty);
 }
 
@@ -1165,7 +1168,7 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
 	 * handle specially, do shortcut processing to speed things
 	 * up.
 	 */
-	if (!test_bit(c, tty->process_char_map) || ldata->lnext) {
+	if (!test_bit(c, ldata->process_char_map) || ldata->lnext) {
 		ldata->lnext = 0;
 		parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
 		if (tty->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) {
@@ -1321,7 +1324,7 @@ send_signal:
 
 handle_newline:
 			spin_lock_irqsave(&tty->read_lock, flags);
-			set_bit(tty->read_head, tty->read_flags);
+			set_bit(tty->read_head, ldata->read_flags);
 			put_tty_queue_nolock(c, tty);
 			tty->canon_head = tty->read_head;
 			tty->canon_data++;
@@ -1496,7 +1499,7 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
 	if (old)
 		canon_change = (old->c_lflag ^ tty->termios.c_lflag) & ICANON;
 	if (canon_change) {
-		memset(&tty->read_flags, 0, sizeof tty->read_flags);
+		bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE);
 		tty->canon_head = tty->read_tail;
 		tty->canon_data = 0;
 		ldata->erasing = 0;
@@ -1516,41 +1519,41 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
 	    I_ICRNL(tty) || I_INLCR(tty) || L_ICANON(tty) ||
 	    I_IXON(tty) || L_ISIG(tty) || L_ECHO(tty) ||
 	    I_PARMRK(tty)) {
-		memset(tty->process_char_map, 0, 256/8);
+		bitmap_zero(ldata->process_char_map, 256);
 
 		if (I_IGNCR(tty) || I_ICRNL(tty))
-			set_bit('\r', tty->process_char_map);
+			set_bit('\r', ldata->process_char_map);
 		if (I_INLCR(tty))
-			set_bit('\n', tty->process_char_map);
+			set_bit('\n', ldata->process_char_map);
 
 		if (L_ICANON(tty)) {
-			set_bit(ERASE_CHAR(tty), tty->process_char_map);
-			set_bit(KILL_CHAR(tty), tty->process_char_map);
-			set_bit(EOF_CHAR(tty), tty->process_char_map);
-			set_bit('\n', tty->process_char_map);
-			set_bit(EOL_CHAR(tty), tty->process_char_map);
+			set_bit(ERASE_CHAR(tty), ldata->process_char_map);
+			set_bit(KILL_CHAR(tty), ldata->process_char_map);
+			set_bit(EOF_CHAR(tty), ldata->process_char_map);
+			set_bit('\n', ldata->process_char_map);
+			set_bit(EOL_CHAR(tty), ldata->process_char_map);
 			if (L_IEXTEN(tty)) {
 				set_bit(WERASE_CHAR(tty),
-					tty->process_char_map);
+					ldata->process_char_map);
 				set_bit(LNEXT_CHAR(tty),
-					tty->process_char_map);
+					ldata->process_char_map);
 				set_bit(EOL2_CHAR(tty),
-					tty->process_char_map);
+					ldata->process_char_map);
 				if (L_ECHO(tty))
 					set_bit(REPRINT_CHAR(tty),
-						tty->process_char_map);
+						ldata->process_char_map);
 			}
 		}
 		if (I_IXON(tty)) {
-			set_bit(START_CHAR(tty), tty->process_char_map);
-			set_bit(STOP_CHAR(tty), tty->process_char_map);
+			set_bit(START_CHAR(tty), ldata->process_char_map);
+			set_bit(STOP_CHAR(tty), ldata->process_char_map);
 		}
 		if (L_ISIG(tty)) {
-			set_bit(INTR_CHAR(tty), tty->process_char_map);
-			set_bit(QUIT_CHAR(tty), tty->process_char_map);
-			set_bit(SUSP_CHAR(tty), tty->process_char_map);
+			set_bit(INTR_CHAR(tty), ldata->process_char_map);
+			set_bit(QUIT_CHAR(tty), ldata->process_char_map);
+			set_bit(SUSP_CHAR(tty), ldata->process_char_map);
 		}
-		clear_bit(__DISABLED_CHAR, tty->process_char_map);
+		clear_bit(__DISABLED_CHAR, ldata->process_char_map);
 		ldata->raw = 0;
 		ldata->real_raw = 0;
 	} else {
@@ -1879,7 +1882,7 @@ do_it_again:
 				int eol;
 
 				eol = test_and_clear_bit(tty->read_tail,
-						tty->read_flags);
+						ldata->read_flags);
 				c = tty->read_buf[tty->read_tail];
 				tty->read_tail = ((tty->read_tail+1) &
 						  (N_TTY_BUF_SIZE-1));
@@ -2105,6 +2108,7 @@ static unsigned int n_tty_poll(struct tty_struct *tty, struct file *file,
 
 static unsigned long inq_canon(struct tty_struct *tty)
 {
+	struct n_tty_data *ldata = tty->disc_data;
 	int nr, head, tail;
 
 	if (!tty->canon_data)
@@ -2114,7 +2118,7 @@ static unsigned long inq_canon(struct tty_struct *tty)
 	nr = (head - tail) & (N_TTY_BUF_SIZE-1);
 	/* Skip EOF-chars.. */
 	while (head != tail) {
-		if (test_bit(tail, tty->read_flags) &&
+		if (test_bit(tail, ldata->read_flags) &&
 		    tty->read_buf[tail] == __DISABLED_CHAR)
 			nr--;
 		tail = (tail+1) & (N_TTY_BUF_SIZE-1);
-- 
cgit v1.2.3


From ba2e68ac6157004ee4922fb39ebd9459bbae883e Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Thu, 18 Oct 2012 22:26:41 +0200
Subject: TTY: move ldisc data from tty_struct: read_* and echo_* and canon_*
 stuff

All the ring-buffers...

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/n_tty.c | 260 +++++++++++++++++++++++++++-------------------------
 1 file changed, 137 insertions(+), 123 deletions(-)

(limited to 'drivers')

diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 702dd4adbdc9..4794537a50ff 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -83,6 +83,19 @@ struct n_tty_data {
 
 	DECLARE_BITMAP(process_char_map, 256);
 	DECLARE_BITMAP(read_flags, N_TTY_BUF_SIZE);
+
+	char *read_buf;
+	int read_head;
+	int read_tail;
+	int read_cnt;
+
+	unsigned char *echo_buf;
+	unsigned int echo_pos;
+	unsigned int echo_cnt;
+
+	int canon_data;
+	unsigned long canon_head;
+	unsigned int canon_column;
 };
 
 static inline int tty_put_user(struct tty_struct *tty, unsigned char x,
@@ -110,14 +123,14 @@ static void n_tty_set_room(struct tty_struct *tty)
 	int left;
 	int old_left;
 
-	/* tty->read_cnt is not read locked ? */
+	/* ldata->read_cnt is not read locked ? */
 	if (I_PARMRK(tty)) {
 		/* Multiply read_cnt by 3, since each byte might take up to
 		 * three times as many spaces when PARMRK is set (depending on
 		 * its flags, e.g. parity error). */
-		left = N_TTY_BUF_SIZE - tty->read_cnt * 3 - 1;
+		left = N_TTY_BUF_SIZE - ldata->read_cnt * 3 - 1;
 	} else
-		left = N_TTY_BUF_SIZE - tty->read_cnt - 1;
+		left = N_TTY_BUF_SIZE - ldata->read_cnt - 1;
 
 	/*
 	 * If we are doing input canonicalization, and there are no
@@ -126,7 +139,7 @@ static void n_tty_set_room(struct tty_struct *tty)
 	 * characters will be beeped.
 	 */
 	if (left <= 0)
-		left = ldata->icanon && !tty->canon_data;
+		left = ldata->icanon && !ldata->canon_data;
 	old_left = tty->receive_room;
 	tty->receive_room = left;
 
@@ -137,10 +150,12 @@ static void n_tty_set_room(struct tty_struct *tty)
 
 static void put_tty_queue_nolock(unsigned char c, struct tty_struct *tty)
 {
-	if (tty->read_cnt < N_TTY_BUF_SIZE) {
-		tty->read_buf[tty->read_head] = c;
-		tty->read_head = (tty->read_head + 1) & (N_TTY_BUF_SIZE-1);
-		tty->read_cnt++;
+	struct n_tty_data *ldata = tty->disc_data;
+
+	if (ldata->read_cnt < N_TTY_BUF_SIZE) {
+		ldata->read_buf[ldata->read_head] = c;
+		ldata->read_head = (ldata->read_head + 1) & (N_TTY_BUF_SIZE-1);
+		ldata->read_cnt++;
 	}
 }
 
@@ -198,14 +213,14 @@ static void reset_buffer_flags(struct tty_struct *tty)
 	unsigned long flags;
 
 	spin_lock_irqsave(&tty->read_lock, flags);
-	tty->read_head = tty->read_tail = tty->read_cnt = 0;
+	ldata->read_head = ldata->read_tail = ldata->read_cnt = 0;
 	spin_unlock_irqrestore(&tty->read_lock, flags);
 
 	mutex_lock(&tty->echo_lock);
-	tty->echo_pos = tty->echo_cnt = ldata->echo_overrun = 0;
+	ldata->echo_pos = ldata->echo_cnt = ldata->echo_overrun = 0;
 	mutex_unlock(&tty->echo_lock);
 
-	tty->canon_head = tty->canon_data = ldata->erasing = 0;
+	ldata->canon_head = ldata->canon_data = ldata->erasing = 0;
 	bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE);
 	n_tty_set_room(tty);
 }
@@ -257,11 +272,11 @@ static ssize_t n_tty_chars_in_buffer(struct tty_struct *tty)
 
 	spin_lock_irqsave(&tty->read_lock, flags);
 	if (!ldata->icanon) {
-		n = tty->read_cnt;
-	} else if (tty->canon_data) {
-		n = (tty->canon_head > tty->read_tail) ?
-			tty->canon_head - tty->read_tail :
-			tty->canon_head + (N_TTY_BUF_SIZE - tty->read_tail);
+		n = ldata->read_cnt;
+	} else if (ldata->canon_data) {
+		n = (ldata->canon_head > ldata->read_tail) ?
+			ldata->canon_head - ldata->read_tail :
+			ldata->canon_head + (N_TTY_BUF_SIZE - ldata->read_tail);
 	}
 	spin_unlock_irqrestore(&tty->read_lock, flags);
 	return n;
@@ -331,11 +346,11 @@ static int do_output_char(unsigned char c, struct tty_struct *tty, int space)
 		if (O_ONLCR(tty)) {
 			if (space < 2)
 				return -1;
-			tty->canon_column = ldata->column = 0;
+			ldata->canon_column = ldata->column = 0;
 			tty->ops->write(tty, "\r\n", 2);
 			return 2;
 		}
-		tty->canon_column = ldata->column;
+		ldata->canon_column = ldata->column;
 		break;
 	case '\r':
 		if (O_ONOCR(tty) && ldata->column == 0)
@@ -343,10 +358,10 @@ static int do_output_char(unsigned char c, struct tty_struct *tty, int space)
 		if (O_OCRNL(tty)) {
 			c = '\n';
 			if (O_ONLRET(tty))
-				tty->canon_column = ldata->column = 0;
+				ldata->canon_column = ldata->column = 0;
 			break;
 		}
-		tty->canon_column = ldata->column = 0;
+		ldata->canon_column = ldata->column = 0;
 		break;
 	case '\t':
 		spaces = 8 - (ldata->column & 7);
@@ -453,14 +468,14 @@ static ssize_t process_output_block(struct tty_struct *tty,
 				ldata->column = 0;
 			if (O_ONLCR(tty))
 				goto break_out;
-			tty->canon_column = ldata->column;
+			ldata->canon_column = ldata->column;
 			break;
 		case '\r':
 			if (O_ONOCR(tty) && ldata->column == 0)
 				goto break_out;
 			if (O_OCRNL(tty))
 				goto break_out;
-			tty->canon_column = ldata->column = 0;
+			ldata->canon_column = ldata->column = 0;
 			break;
 		case '\t':
 			goto break_out;
@@ -518,7 +533,7 @@ static void process_echoes(struct tty_struct *tty)
 	unsigned char c;
 	unsigned char *cp, *buf_end;
 
-	if (!tty->echo_cnt)
+	if (!ldata->echo_cnt)
 		return;
 
 	mutex_lock(&tty->output_lock);
@@ -526,9 +541,9 @@ static void process_echoes(struct tty_struct *tty)
 
 	space = tty_write_room(tty);
 
-	buf_end = tty->echo_buf + N_TTY_BUF_SIZE;
-	cp = tty->echo_buf + tty->echo_pos;
-	nr = tty->echo_cnt;
+	buf_end = ldata->echo_buf + N_TTY_BUF_SIZE;
+	cp = ldata->echo_buf + ldata->echo_pos;
+	nr = ldata->echo_cnt;
 	while (nr > 0) {
 		c = *cp;
 		if (c == ECHO_OP_START) {
@@ -565,7 +580,7 @@ static void process_echoes(struct tty_struct *tty)
 				 * Otherwise, tab spacing is normal.
 				 */
 				if (!(num_chars & 0x80))
-					num_chars += tty->canon_column;
+					num_chars += ldata->canon_column;
 				num_bs = 8 - (num_chars & 7);
 
 				if (num_bs > space) {
@@ -583,7 +598,7 @@ static void process_echoes(struct tty_struct *tty)
 				break;
 
 			case ECHO_OP_SET_CANON_COL:
-				tty->canon_column = ldata->column;
+				ldata->canon_column = ldata->column;
 				cp += 2;
 				nr -= 2;
 				break;
@@ -655,14 +670,14 @@ static void process_echoes(struct tty_struct *tty)
 	}
 
 	if (nr == 0) {
-		tty->echo_pos = 0;
-		tty->echo_cnt = 0;
+		ldata->echo_pos = 0;
+		ldata->echo_cnt = 0;
 		ldata->echo_overrun = 0;
 	} else {
-		int num_processed = tty->echo_cnt - nr;
-		tty->echo_pos += num_processed;
-		tty->echo_pos &= N_TTY_BUF_SIZE - 1;
-		tty->echo_cnt = nr;
+		int num_processed = ldata->echo_cnt - nr;
+		ldata->echo_pos += num_processed;
+		ldata->echo_pos &= N_TTY_BUF_SIZE - 1;
+		ldata->echo_cnt = nr;
 		if (num_processed > 0)
 			ldata->echo_overrun = 0;
 	}
@@ -689,37 +704,37 @@ static void add_echo_byte(unsigned char c, struct tty_struct *tty)
 	struct n_tty_data *ldata = tty->disc_data;
 	int	new_byte_pos;
 
-	if (tty->echo_cnt == N_TTY_BUF_SIZE) {
+	if (ldata->echo_cnt == N_TTY_BUF_SIZE) {
 		/* Circular buffer is already at capacity */
-		new_byte_pos = tty->echo_pos;
+		new_byte_pos = ldata->echo_pos;
 
 		/*
 		 * Since the buffer start position needs to be advanced,
 		 * be sure to step by a whole operation byte group.
 		 */
-		if (tty->echo_buf[tty->echo_pos] == ECHO_OP_START) {
-			if (tty->echo_buf[(tty->echo_pos + 1) &
+		if (ldata->echo_buf[ldata->echo_pos] == ECHO_OP_START) {
+			if (ldata->echo_buf[(ldata->echo_pos + 1) &
 					  (N_TTY_BUF_SIZE - 1)] ==
 						ECHO_OP_ERASE_TAB) {
-				tty->echo_pos += 3;
-				tty->echo_cnt -= 2;
+				ldata->echo_pos += 3;
+				ldata->echo_cnt -= 2;
 			} else {
-				tty->echo_pos += 2;
-				tty->echo_cnt -= 1;
+				ldata->echo_pos += 2;
+				ldata->echo_cnt -= 1;
 			}
 		} else {
-			tty->echo_pos++;
+			ldata->echo_pos++;
 		}
-		tty->echo_pos &= N_TTY_BUF_SIZE - 1;
+		ldata->echo_pos &= N_TTY_BUF_SIZE - 1;
 
 		ldata->echo_overrun = 1;
 	} else {
-		new_byte_pos = tty->echo_pos + tty->echo_cnt;
+		new_byte_pos = ldata->echo_pos + ldata->echo_cnt;
 		new_byte_pos &= N_TTY_BUF_SIZE - 1;
-		tty->echo_cnt++;
+		ldata->echo_cnt++;
 	}
 
-	tty->echo_buf[new_byte_pos] = c;
+	ldata->echo_buf[new_byte_pos] = c;
 }
 
 /**
@@ -889,7 +904,7 @@ static void eraser(unsigned char c, struct tty_struct *tty)
 	unsigned long flags;
 
 	/* FIXME: locking needed ? */
-	if (tty->read_head == tty->canon_head) {
+	if (ldata->read_head == ldata->canon_head) {
 		/* process_output('\a', tty); */ /* what do you think? */
 		return;
 	}
@@ -900,17 +915,17 @@ static void eraser(unsigned char c, struct tty_struct *tty)
 	else {
 		if (!L_ECHO(tty)) {
 			spin_lock_irqsave(&tty->read_lock, flags);
-			tty->read_cnt -= ((tty->read_head - tty->canon_head) &
+			ldata->read_cnt -= ((ldata->read_head - ldata->canon_head) &
 					  (N_TTY_BUF_SIZE - 1));
-			tty->read_head = tty->canon_head;
+			ldata->read_head = ldata->canon_head;
 			spin_unlock_irqrestore(&tty->read_lock, flags);
 			return;
 		}
 		if (!L_ECHOK(tty) || !L_ECHOKE(tty) || !L_ECHOE(tty)) {
 			spin_lock_irqsave(&tty->read_lock, flags);
-			tty->read_cnt -= ((tty->read_head - tty->canon_head) &
+			ldata->read_cnt -= ((ldata->read_head - ldata->canon_head) &
 					  (N_TTY_BUF_SIZE - 1));
-			tty->read_head = tty->canon_head;
+			ldata->read_head = ldata->canon_head;
 			spin_unlock_irqrestore(&tty->read_lock, flags);
 			finish_erasing(tty);
 			echo_char(KILL_CHAR(tty), tty);
@@ -924,14 +939,14 @@ static void eraser(unsigned char c, struct tty_struct *tty)
 
 	seen_alnums = 0;
 	/* FIXME: Locking ?? */
-	while (tty->read_head != tty->canon_head) {
-		head = tty->read_head;
+	while (ldata->read_head != ldata->canon_head) {
+		head = ldata->read_head;
 
 		/* erase a single possibly multibyte character */
 		do {
 			head = (head - 1) & (N_TTY_BUF_SIZE-1);
-			c = tty->read_buf[head];
-		} while (is_continuation(c, tty) && head != tty->canon_head);
+			c = ldata->read_buf[head];
+		} while (is_continuation(c, tty) && head != ldata->canon_head);
 
 		/* do not partially erase */
 		if (is_continuation(c, tty))
@@ -944,10 +959,10 @@ static void eraser(unsigned char c, struct tty_struct *tty)
 			else if (seen_alnums)
 				break;
 		}
-		cnt = (tty->read_head - head) & (N_TTY_BUF_SIZE-1);
+		cnt = (ldata->read_head - head) & (N_TTY_BUF_SIZE-1);
 		spin_lock_irqsave(&tty->read_lock, flags);
-		tty->read_head = head;
-		tty->read_cnt -= cnt;
+		ldata->read_head = head;
+		ldata->read_cnt -= cnt;
 		spin_unlock_irqrestore(&tty->read_lock, flags);
 		if (L_ECHO(tty)) {
 			if (L_ECHOPRT(tty)) {
@@ -959,7 +974,7 @@ static void eraser(unsigned char c, struct tty_struct *tty)
 				echo_char(c, tty);
 				while (--cnt > 0) {
 					head = (head+1) & (N_TTY_BUF_SIZE-1);
-					echo_char_raw(tty->read_buf[head], tty);
+					echo_char_raw(ldata->read_buf[head], tty);
 					echo_move_back_col(tty);
 				}
 			} else if (kill_type == ERASE && !L_ECHOE(tty)) {
@@ -967,7 +982,7 @@ static void eraser(unsigned char c, struct tty_struct *tty)
 			} else if (c == '\t') {
 				unsigned int num_chars = 0;
 				int after_tab = 0;
-				unsigned long tail = tty->read_head;
+				unsigned long tail = ldata->read_head;
 
 				/*
 				 * Count the columns used for characters
@@ -976,9 +991,9 @@ static void eraser(unsigned char c, struct tty_struct *tty)
 				 * This info is used to go back the correct
 				 * number of columns.
 				 */
-				while (tail != tty->canon_head) {
+				while (tail != ldata->canon_head) {
 					tail = (tail-1) & (N_TTY_BUF_SIZE-1);
-					c = tty->read_buf[tail];
+					c = ldata->read_buf[tail];
 					if (c == '\t') {
 						after_tab = 1;
 						break;
@@ -1006,7 +1021,7 @@ static void eraser(unsigned char c, struct tty_struct *tty)
 		if (kill_type == ERASE)
 			break;
 	}
-	if (tty->read_head == tty->canon_head && L_ECHO(tty))
+	if (ldata->read_head == ldata->canon_head && L_ECHO(tty))
 		finish_erasing(tty);
 }
 
@@ -1171,7 +1186,7 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
 	if (!test_bit(c, ldata->process_char_map) || ldata->lnext) {
 		ldata->lnext = 0;
 		parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
-		if (tty->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) {
+		if (ldata->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) {
 			/* beep if no space */
 			if (L_ECHO(tty))
 				process_output('\a', tty);
@@ -1180,7 +1195,7 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
 		if (L_ECHO(tty)) {
 			finish_erasing(tty);
 			/* Record the column of first canon char. */
-			if (tty->canon_head == tty->read_head)
+			if (ldata->canon_head == ldata->read_head)
 				echo_set_canon_col(tty);
 			echo_char(c, tty);
 			process_echoes(tty);
@@ -1264,20 +1279,20 @@ send_signal:
 		}
 		if (c == REPRINT_CHAR(tty) && L_ECHO(tty) &&
 		    L_IEXTEN(tty)) {
-			unsigned long tail = tty->canon_head;
+			unsigned long tail = ldata->canon_head;
 
 			finish_erasing(tty);
 			echo_char(c, tty);
 			echo_char_raw('\n', tty);
-			while (tail != tty->read_head) {
-				echo_char(tty->read_buf[tail], tty);
+			while (tail != ldata->read_head) {
+				echo_char(ldata->read_buf[tail], tty);
 				tail = (tail+1) & (N_TTY_BUF_SIZE-1);
 			}
 			process_echoes(tty);
 			return;
 		}
 		if (c == '\n') {
-			if (tty->read_cnt >= N_TTY_BUF_SIZE) {
+			if (ldata->read_cnt >= N_TTY_BUF_SIZE) {
 				if (L_ECHO(tty))
 					process_output('\a', tty);
 				return;
@@ -1289,9 +1304,9 @@ send_signal:
 			goto handle_newline;
 		}
 		if (c == EOF_CHAR(tty)) {
-			if (tty->read_cnt >= N_TTY_BUF_SIZE)
+			if (ldata->read_cnt >= N_TTY_BUF_SIZE)
 				return;
-			if (tty->canon_head != tty->read_head)
+			if (ldata->canon_head != ldata->read_head)
 				set_bit(TTY_PUSH, &tty->flags);
 			c = __DISABLED_CHAR;
 			goto handle_newline;
@@ -1300,7 +1315,7 @@ send_signal:
 		    (c == EOL2_CHAR(tty) && L_IEXTEN(tty))) {
 			parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty))
 				 ? 1 : 0;
-			if (tty->read_cnt >= (N_TTY_BUF_SIZE - parmrk)) {
+			if (ldata->read_cnt >= (N_TTY_BUF_SIZE - parmrk)) {
 				if (L_ECHO(tty))
 					process_output('\a', tty);
 				return;
@@ -1310,7 +1325,7 @@ send_signal:
 			 */
 			if (L_ECHO(tty)) {
 				/* Record the column of first canon char. */
-				if (tty->canon_head == tty->read_head)
+				if (ldata->canon_head == ldata->read_head)
 					echo_set_canon_col(tty);
 				echo_char(c, tty);
 				process_echoes(tty);
@@ -1324,10 +1339,10 @@ send_signal:
 
 handle_newline:
 			spin_lock_irqsave(&tty->read_lock, flags);
-			set_bit(tty->read_head, ldata->read_flags);
+			set_bit(ldata->read_head, ldata->read_flags);
 			put_tty_queue_nolock(c, tty);
-			tty->canon_head = tty->read_head;
-			tty->canon_data++;
+			ldata->canon_head = ldata->read_head;
+			ldata->canon_data++;
 			spin_unlock_irqrestore(&tty->read_lock, flags);
 			kill_fasync(&tty->fasync, SIGIO, POLL_IN);
 			if (waitqueue_active(&tty->read_wait))
@@ -1337,7 +1352,7 @@ handle_newline:
 	}
 
 	parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
-	if (tty->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) {
+	if (ldata->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) {
 		/* beep if no space */
 		if (L_ECHO(tty))
 			process_output('\a', tty);
@@ -1349,7 +1364,7 @@ handle_newline:
 			echo_char_raw('\n', tty);
 		else {
 			/* Record the column of first canon char. */
-			if (tty->canon_head == tty->read_head)
+			if (ldata->canon_head == ldata->read_head)
 				echo_set_canon_col(tty);
 			echo_char(c, tty);
 		}
@@ -1403,21 +1418,21 @@ static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
 
 	if (ldata->real_raw) {
 		spin_lock_irqsave(&tty->read_lock, cpuflags);
-		i = min(N_TTY_BUF_SIZE - tty->read_cnt,
-			N_TTY_BUF_SIZE - tty->read_head);
+		i = min(N_TTY_BUF_SIZE - ldata->read_cnt,
+			N_TTY_BUF_SIZE - ldata->read_head);
 		i = min(count, i);
-		memcpy(tty->read_buf + tty->read_head, cp, i);
-		tty->read_head = (tty->read_head + i) & (N_TTY_BUF_SIZE-1);
-		tty->read_cnt += i;
+		memcpy(ldata->read_buf + ldata->read_head, cp, i);
+		ldata->read_head = (ldata->read_head + i) & (N_TTY_BUF_SIZE-1);
+		ldata->read_cnt += i;
 		cp += i;
 		count -= i;
 
-		i = min(N_TTY_BUF_SIZE - tty->read_cnt,
-			N_TTY_BUF_SIZE - tty->read_head);
+		i = min(N_TTY_BUF_SIZE - ldata->read_cnt,
+			N_TTY_BUF_SIZE - ldata->read_head);
 		i = min(count, i);
-		memcpy(tty->read_buf + tty->read_head, cp, i);
-		tty->read_head = (tty->read_head + i) & (N_TTY_BUF_SIZE-1);
-		tty->read_cnt += i;
+		memcpy(ldata->read_buf + ldata->read_head, cp, i);
+		ldata->read_head = (ldata->read_head + i) & (N_TTY_BUF_SIZE-1);
+		ldata->read_cnt += i;
 		spin_unlock_irqrestore(&tty->read_lock, cpuflags);
 	} else {
 		for (i = count, p = cp, f = fp; i; i--, p++) {
@@ -1449,7 +1464,7 @@ static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
 
 	n_tty_set_room(tty);
 
-	if ((!ldata->icanon && (tty->read_cnt >= tty->minimum_to_wake)) ||
+	if ((!ldata->icanon && (ldata->read_cnt >= tty->minimum_to_wake)) ||
 		L_EXTPROC(tty)) {
 		kill_fasync(&tty->fasync, SIGIO, POLL_IN);
 		if (waitqueue_active(&tty->read_wait))
@@ -1500,12 +1515,12 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
 		canon_change = (old->c_lflag ^ tty->termios.c_lflag) & ICANON;
 	if (canon_change) {
 		bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE);
-		tty->canon_head = tty->read_tail;
-		tty->canon_data = 0;
+		ldata->canon_head = ldata->read_tail;
+		ldata->canon_data = 0;
 		ldata->erasing = 0;
 	}
 
-	if (canon_change && !L_ICANON(tty) && tty->read_cnt)
+	if (canon_change && !L_ICANON(tty) && ldata->read_cnt)
 		wake_up_interruptible(&tty->read_wait);
 
 	ldata->icanon = (L_ICANON(tty) != 0);
@@ -1586,11 +1601,9 @@ static void n_tty_close(struct tty_struct *tty)
 	struct n_tty_data *ldata = tty->disc_data;
 
 	n_tty_flush_buffer(tty);
-	kfree(tty->read_buf);
-	kfree(tty->echo_buf);
+	kfree(ldata->read_buf);
+	kfree(ldata->echo_buf);
 	kfree(ldata);
-	tty->read_buf = NULL;
-	tty->echo_buf = NULL;
 	tty->disc_data = NULL;
 }
 
@@ -1615,9 +1628,9 @@ static int n_tty_open(struct tty_struct *tty)
 	ldata->overrun_time = jiffies;
 
 	/* These are ugly. Currently a malloc failure here can panic */
-	tty->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
-	tty->echo_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
-	if (!tty->read_buf || !tty->echo_buf)
+	ldata->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
+	ldata->echo_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
+	if (!ldata->read_buf || !ldata->echo_buf)
 		goto err_free_bufs;
 
 	tty->disc_data = ldata;
@@ -1630,8 +1643,8 @@ static int n_tty_open(struct tty_struct *tty)
 
 	return 0;
 err_free_bufs:
-	kfree(tty->read_buf);
-	kfree(tty->echo_buf);
+	kfree(ldata->read_buf);
+	kfree(ldata->echo_buf);
 	kfree(ldata);
 err:
 	return -ENOMEM;
@@ -1643,9 +1656,9 @@ static inline int input_available_p(struct tty_struct *tty, int amt)
 
 	tty_flush_to_ldisc(tty);
 	if (ldata->icanon && !L_EXTPROC(tty)) {
-		if (tty->canon_data)
+		if (ldata->canon_data)
 			return 1;
-	} else if (tty->read_cnt >= (amt ? amt : 1))
+	} else if (ldata->read_cnt >= (amt ? amt : 1))
 		return 1;
 
 	return 0;
@@ -1681,21 +1694,21 @@ static int copy_from_read_buf(struct tty_struct *tty,
 
 	retval = 0;
 	spin_lock_irqsave(&tty->read_lock, flags);
-	n = min(tty->read_cnt, N_TTY_BUF_SIZE - tty->read_tail);
+	n = min(ldata->read_cnt, N_TTY_BUF_SIZE - ldata->read_tail);
 	n = min(*nr, n);
 	spin_unlock_irqrestore(&tty->read_lock, flags);
 	if (n) {
-		retval = copy_to_user(*b, &tty->read_buf[tty->read_tail], n);
+		retval = copy_to_user(*b, &ldata->read_buf[ldata->read_tail], n);
 		n -= retval;
 		is_eof = n == 1 &&
-			tty->read_buf[tty->read_tail] == EOF_CHAR(tty);
-		tty_audit_add_data(tty, &tty->read_buf[tty->read_tail], n,
+			ldata->read_buf[ldata->read_tail] == EOF_CHAR(tty);
+		tty_audit_add_data(tty, &ldata->read_buf[ldata->read_tail], n,
 				ldata->icanon);
 		spin_lock_irqsave(&tty->read_lock, flags);
-		tty->read_tail = (tty->read_tail + n) & (N_TTY_BUF_SIZE-1);
-		tty->read_cnt -= n;
+		ldata->read_tail = (ldata->read_tail + n) & (N_TTY_BUF_SIZE-1);
+		ldata->read_cnt -= n;
 		/* Turn single EOF into zero-length read */
-		if (L_EXTPROC(tty) && ldata->icanon && is_eof && !tty->read_cnt)
+		if (L_EXTPROC(tty) && ldata->icanon && is_eof && !ldata->read_cnt)
 			n = 0;
 		spin_unlock_irqrestore(&tty->read_lock, flags);
 		*b += n;
@@ -1878,22 +1891,22 @@ do_it_again:
 		if (ldata->icanon && !L_EXTPROC(tty)) {
 			/* N.B. avoid overrun if nr == 0 */
 			spin_lock_irqsave(&tty->read_lock, flags);
-			while (nr && tty->read_cnt) {
+			while (nr && ldata->read_cnt) {
 				int eol;
 
-				eol = test_and_clear_bit(tty->read_tail,
+				eol = test_and_clear_bit(ldata->read_tail,
 						ldata->read_flags);
-				c = tty->read_buf[tty->read_tail];
-				tty->read_tail = ((tty->read_tail+1) &
+				c = ldata->read_buf[ldata->read_tail];
+				ldata->read_tail = ((ldata->read_tail+1) &
 						  (N_TTY_BUF_SIZE-1));
-				tty->read_cnt--;
+				ldata->read_cnt--;
 				if (eol) {
 					/* this test should be redundant:
 					 * we shouldn't be reading data if
 					 * canon_data is 0
 					 */
-					if (--tty->canon_data < 0)
-						tty->canon_data = 0;
+					if (--ldata->canon_data < 0)
+						ldata->canon_data = 0;
 				}
 				spin_unlock_irqrestore(&tty->read_lock, flags);
 
@@ -2111,15 +2124,15 @@ static unsigned long inq_canon(struct tty_struct *tty)
 	struct n_tty_data *ldata = tty->disc_data;
 	int nr, head, tail;
 
-	if (!tty->canon_data)
+	if (!ldata->canon_data)
 		return 0;
-	head = tty->canon_head;
-	tail = tty->read_tail;
+	head = ldata->canon_head;
+	tail = ldata->read_tail;
 	nr = (head - tail) & (N_TTY_BUF_SIZE-1);
 	/* Skip EOF-chars.. */
 	while (head != tail) {
 		if (test_bit(tail, ldata->read_flags) &&
-		    tty->read_buf[tail] == __DISABLED_CHAR)
+		    ldata->read_buf[tail] == __DISABLED_CHAR)
 			nr--;
 		tail = (tail+1) & (N_TTY_BUF_SIZE-1);
 	}
@@ -2129,6 +2142,7 @@ static unsigned long inq_canon(struct tty_struct *tty)
 static int n_tty_ioctl(struct tty_struct *tty, struct file *file,
 		       unsigned int cmd, unsigned long arg)
 {
+	struct n_tty_data *ldata = tty->disc_data;
 	int retval;
 
 	switch (cmd) {
@@ -2136,7 +2150,7 @@ static int n_tty_ioctl(struct tty_struct *tty, struct file *file,
 		return put_user(tty_chars_in_buffer(tty), (int __user *) arg);
 	case TIOCINQ:
 		/* FIXME: Locking */
-		retval = tty->read_cnt;
+		retval = ldata->read_cnt;
 		if (L_ICANON(tty))
 			retval = inq_canon(tty);
 		return put_user(retval, (unsigned int __user *) arg);
-- 
cgit v1.2.3


From bddc7152f68bc1e0ee1f55a8055e33531f384101 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Thu, 18 Oct 2012 22:26:42 +0200
Subject: TTY: move ldisc data from tty_struct: locks

atomic_write_lock is not n_tty specific, so move it up in the
tty_struct.

And since these are the last ones to move, remove also the comment
saying there are some ldisc' members. There are none now.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/n_tty.c  | 123 ++++++++++++++++++++++++++++++---------------------
 drivers/tty/tty_io.c |   4 --
 2 files changed, 72 insertions(+), 55 deletions(-)

(limited to 'drivers')

diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 4794537a50ff..0a6fcda96152 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -96,6 +96,11 @@ struct n_tty_data {
 	int canon_data;
 	unsigned long canon_head;
 	unsigned int canon_column;
+
+	struct mutex atomic_read_lock;
+	struct mutex output_lock;
+	struct mutex echo_lock;
+	spinlock_t read_lock;
 };
 
 static inline int tty_put_user(struct tty_struct *tty, unsigned char x,
@@ -171,14 +176,15 @@ static void put_tty_queue_nolock(unsigned char c, struct tty_struct *tty)
 
 static void put_tty_queue(unsigned char c, struct tty_struct *tty)
 {
+	struct n_tty_data *ldata = tty->disc_data;
 	unsigned long flags;
 	/*
 	 *	The problem of stomping on the buffers ends here.
 	 *	Why didn't anyone see this one coming? --AJK
 	*/
-	spin_lock_irqsave(&tty->read_lock, flags);
+	spin_lock_irqsave(&ldata->read_lock, flags);
 	put_tty_queue_nolock(c, tty);
-	spin_unlock_irqrestore(&tty->read_lock, flags);
+	spin_unlock_irqrestore(&ldata->read_lock, flags);
 }
 
 /**
@@ -212,13 +218,13 @@ static void reset_buffer_flags(struct tty_struct *tty)
 	struct n_tty_data *ldata = tty->disc_data;
 	unsigned long flags;
 
-	spin_lock_irqsave(&tty->read_lock, flags);
+	spin_lock_irqsave(&ldata->read_lock, flags);
 	ldata->read_head = ldata->read_tail = ldata->read_cnt = 0;
-	spin_unlock_irqrestore(&tty->read_lock, flags);
+	spin_unlock_irqrestore(&ldata->read_lock, flags);
 
-	mutex_lock(&tty->echo_lock);
+	mutex_lock(&ldata->echo_lock);
 	ldata->echo_pos = ldata->echo_cnt = ldata->echo_overrun = 0;
-	mutex_unlock(&tty->echo_lock);
+	mutex_unlock(&ldata->echo_lock);
 
 	ldata->canon_head = ldata->canon_data = ldata->erasing = 0;
 	bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE);
@@ -270,7 +276,7 @@ static ssize_t n_tty_chars_in_buffer(struct tty_struct *tty)
 	unsigned long flags;
 	ssize_t n = 0;
 
-	spin_lock_irqsave(&tty->read_lock, flags);
+	spin_lock_irqsave(&ldata->read_lock, flags);
 	if (!ldata->icanon) {
 		n = ldata->read_cnt;
 	} else if (ldata->canon_data) {
@@ -278,7 +284,7 @@ static ssize_t n_tty_chars_in_buffer(struct tty_struct *tty)
 			ldata->canon_head - ldata->read_tail :
 			ldata->canon_head + (N_TTY_BUF_SIZE - ldata->read_tail);
 	}
-	spin_unlock_irqrestore(&tty->read_lock, flags);
+	spin_unlock_irqrestore(&ldata->read_lock, flags);
 	return n;
 }
 
@@ -408,14 +414,15 @@ static int do_output_char(unsigned char c, struct tty_struct *tty, int space)
 
 static int process_output(unsigned char c, struct tty_struct *tty)
 {
+	struct n_tty_data *ldata = tty->disc_data;
 	int	space, retval;
 
-	mutex_lock(&tty->output_lock);
+	mutex_lock(&ldata->output_lock);
 
 	space = tty_write_room(tty);
 	retval = do_output_char(c, tty, space);
 
-	mutex_unlock(&tty->output_lock);
+	mutex_unlock(&ldata->output_lock);
 	if (retval < 0)
 		return -1;
 	else
@@ -449,11 +456,11 @@ static ssize_t process_output_block(struct tty_struct *tty,
 	int	i;
 	const unsigned char *cp;
 
-	mutex_lock(&tty->output_lock);
+	mutex_lock(&ldata->output_lock);
 
 	space = tty_write_room(tty);
 	if (!space) {
-		mutex_unlock(&tty->output_lock);
+		mutex_unlock(&ldata->output_lock);
 		return 0;
 	}
 	if (nr > space)
@@ -496,7 +503,7 @@ static ssize_t process_output_block(struct tty_struct *tty,
 break_out:
 	i = tty->ops->write(tty, buf, i);
 
-	mutex_unlock(&tty->output_lock);
+	mutex_unlock(&ldata->output_lock);
 	return i;
 }
 
@@ -536,8 +543,8 @@ static void process_echoes(struct tty_struct *tty)
 	if (!ldata->echo_cnt)
 		return;
 
-	mutex_lock(&tty->output_lock);
-	mutex_lock(&tty->echo_lock);
+	mutex_lock(&ldata->output_lock);
+	mutex_lock(&ldata->echo_lock);
 
 	space = tty_write_room(tty);
 
@@ -682,8 +689,8 @@ static void process_echoes(struct tty_struct *tty)
 			ldata->echo_overrun = 0;
 	}
 
-	mutex_unlock(&tty->echo_lock);
-	mutex_unlock(&tty->output_lock);
+	mutex_unlock(&ldata->echo_lock);
+	mutex_unlock(&ldata->output_lock);
 
 	if (tty->ops->flush_chars)
 		tty->ops->flush_chars(tty);
@@ -748,12 +755,14 @@ static void add_echo_byte(unsigned char c, struct tty_struct *tty)
 
 static void echo_move_back_col(struct tty_struct *tty)
 {
-	mutex_lock(&tty->echo_lock);
+	struct n_tty_data *ldata = tty->disc_data;
+
+	mutex_lock(&ldata->echo_lock);
 
 	add_echo_byte(ECHO_OP_START, tty);
 	add_echo_byte(ECHO_OP_MOVE_BACK_COL, tty);
 
-	mutex_unlock(&tty->echo_lock);
+	mutex_unlock(&ldata->echo_lock);
 }
 
 /**
@@ -768,12 +777,14 @@ static void echo_move_back_col(struct tty_struct *tty)
 
 static void echo_set_canon_col(struct tty_struct *tty)
 {
-	mutex_lock(&tty->echo_lock);
+	struct n_tty_data *ldata = tty->disc_data;
+
+	mutex_lock(&ldata->echo_lock);
 
 	add_echo_byte(ECHO_OP_START, tty);
 	add_echo_byte(ECHO_OP_SET_CANON_COL, tty);
 
-	mutex_unlock(&tty->echo_lock);
+	mutex_unlock(&ldata->echo_lock);
 }
 
 /**
@@ -796,7 +807,9 @@ static void echo_set_canon_col(struct tty_struct *tty)
 static void echo_erase_tab(unsigned int num_chars, int after_tab,
 			   struct tty_struct *tty)
 {
-	mutex_lock(&tty->echo_lock);
+	struct n_tty_data *ldata = tty->disc_data;
+
+	mutex_lock(&ldata->echo_lock);
 
 	add_echo_byte(ECHO_OP_START, tty);
 	add_echo_byte(ECHO_OP_ERASE_TAB, tty);
@@ -810,7 +823,7 @@ static void echo_erase_tab(unsigned int num_chars, int after_tab,
 
 	add_echo_byte(num_chars, tty);
 
-	mutex_unlock(&tty->echo_lock);
+	mutex_unlock(&ldata->echo_lock);
 }
 
 /**
@@ -828,7 +841,9 @@ static void echo_erase_tab(unsigned int num_chars, int after_tab,
 
 static void echo_char_raw(unsigned char c, struct tty_struct *tty)
 {
-	mutex_lock(&tty->echo_lock);
+	struct n_tty_data *ldata = tty->disc_data;
+
+	mutex_lock(&ldata->echo_lock);
 
 	if (c == ECHO_OP_START) {
 		add_echo_byte(ECHO_OP_START, tty);
@@ -837,7 +852,7 @@ static void echo_char_raw(unsigned char c, struct tty_struct *tty)
 		add_echo_byte(c, tty);
 	}
 
-	mutex_unlock(&tty->echo_lock);
+	mutex_unlock(&ldata->echo_lock);
 }
 
 /**
@@ -856,7 +871,9 @@ static void echo_char_raw(unsigned char c, struct tty_struct *tty)
 
 static void echo_char(unsigned char c, struct tty_struct *tty)
 {
-	mutex_lock(&tty->echo_lock);
+	struct n_tty_data *ldata = tty->disc_data;
+
+	mutex_lock(&ldata->echo_lock);
 
 	if (c == ECHO_OP_START) {
 		add_echo_byte(ECHO_OP_START, tty);
@@ -867,7 +884,7 @@ static void echo_char(unsigned char c, struct tty_struct *tty)
 		add_echo_byte(c, tty);
 	}
 
-	mutex_unlock(&tty->echo_lock);
+	mutex_unlock(&ldata->echo_lock);
 }
 
 /**
@@ -914,19 +931,19 @@ static void eraser(unsigned char c, struct tty_struct *tty)
 		kill_type = WERASE;
 	else {
 		if (!L_ECHO(tty)) {
-			spin_lock_irqsave(&tty->read_lock, flags);
+			spin_lock_irqsave(&ldata->read_lock, flags);
 			ldata->read_cnt -= ((ldata->read_head - ldata->canon_head) &
 					  (N_TTY_BUF_SIZE - 1));
 			ldata->read_head = ldata->canon_head;
-			spin_unlock_irqrestore(&tty->read_lock, flags);
+			spin_unlock_irqrestore(&ldata->read_lock, flags);
 			return;
 		}
 		if (!L_ECHOK(tty) || !L_ECHOKE(tty) || !L_ECHOE(tty)) {
-			spin_lock_irqsave(&tty->read_lock, flags);
+			spin_lock_irqsave(&ldata->read_lock, flags);
 			ldata->read_cnt -= ((ldata->read_head - ldata->canon_head) &
 					  (N_TTY_BUF_SIZE - 1));
 			ldata->read_head = ldata->canon_head;
-			spin_unlock_irqrestore(&tty->read_lock, flags);
+			spin_unlock_irqrestore(&ldata->read_lock, flags);
 			finish_erasing(tty);
 			echo_char(KILL_CHAR(tty), tty);
 			/* Add a newline if ECHOK is on and ECHOKE is off. */
@@ -960,10 +977,10 @@ static void eraser(unsigned char c, struct tty_struct *tty)
 				break;
 		}
 		cnt = (ldata->read_head - head) & (N_TTY_BUF_SIZE-1);
-		spin_lock_irqsave(&tty->read_lock, flags);
+		spin_lock_irqsave(&ldata->read_lock, flags);
 		ldata->read_head = head;
 		ldata->read_cnt -= cnt;
-		spin_unlock_irqrestore(&tty->read_lock, flags);
+		spin_unlock_irqrestore(&ldata->read_lock, flags);
 		if (L_ECHO(tty)) {
 			if (L_ECHOPRT(tty)) {
 				if (!ldata->erasing) {
@@ -1338,12 +1355,12 @@ send_signal:
 				put_tty_queue(c, tty);
 
 handle_newline:
-			spin_lock_irqsave(&tty->read_lock, flags);
+			spin_lock_irqsave(&ldata->read_lock, flags);
 			set_bit(ldata->read_head, ldata->read_flags);
 			put_tty_queue_nolock(c, tty);
 			ldata->canon_head = ldata->read_head;
 			ldata->canon_data++;
-			spin_unlock_irqrestore(&tty->read_lock, flags);
+			spin_unlock_irqrestore(&ldata->read_lock, flags);
 			kill_fasync(&tty->fasync, SIGIO, POLL_IN);
 			if (waitqueue_active(&tty->read_wait))
 				wake_up_interruptible(&tty->read_wait);
@@ -1417,7 +1434,7 @@ static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
 	unsigned long cpuflags;
 
 	if (ldata->real_raw) {
-		spin_lock_irqsave(&tty->read_lock, cpuflags);
+		spin_lock_irqsave(&ldata->read_lock, cpuflags);
 		i = min(N_TTY_BUF_SIZE - ldata->read_cnt,
 			N_TTY_BUF_SIZE - ldata->read_head);
 		i = min(count, i);
@@ -1433,7 +1450,7 @@ static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
 		memcpy(ldata->read_buf + ldata->read_head, cp, i);
 		ldata->read_head = (ldata->read_head + i) & (N_TTY_BUF_SIZE-1);
 		ldata->read_cnt += i;
-		spin_unlock_irqrestore(&tty->read_lock, cpuflags);
+		spin_unlock_irqrestore(&ldata->read_lock, cpuflags);
 	} else {
 		for (i = count, p = cp, f = fp; i; i--, p++) {
 			if (f)
@@ -1626,6 +1643,10 @@ static int n_tty_open(struct tty_struct *tty)
 		goto err;
 
 	ldata->overrun_time = jiffies;
+	mutex_init(&ldata->atomic_read_lock);
+	mutex_init(&ldata->output_lock);
+	mutex_init(&ldata->echo_lock);
+	spin_lock_init(&ldata->read_lock);
 
 	/* These are ugly. Currently a malloc failure here can panic */
 	ldata->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
@@ -1677,7 +1698,7 @@ static inline int input_available_p(struct tty_struct *tty, int amt)
  *	buffer, and once to drain the space from the (physical) beginning of
  *	the buffer to head pointer.
  *
- *	Called under the tty->atomic_read_lock sem
+ *	Called under the ldata->atomic_read_lock sem
  *
  */
 
@@ -1693,10 +1714,10 @@ static int copy_from_read_buf(struct tty_struct *tty,
 	bool is_eof;
 
 	retval = 0;
-	spin_lock_irqsave(&tty->read_lock, flags);
+	spin_lock_irqsave(&ldata->read_lock, flags);
 	n = min(ldata->read_cnt, N_TTY_BUF_SIZE - ldata->read_tail);
 	n = min(*nr, n);
-	spin_unlock_irqrestore(&tty->read_lock, flags);
+	spin_unlock_irqrestore(&ldata->read_lock, flags);
 	if (n) {
 		retval = copy_to_user(*b, &ldata->read_buf[ldata->read_tail], n);
 		n -= retval;
@@ -1704,13 +1725,13 @@ static int copy_from_read_buf(struct tty_struct *tty,
 			ldata->read_buf[ldata->read_tail] == EOF_CHAR(tty);
 		tty_audit_add_data(tty, &ldata->read_buf[ldata->read_tail], n,
 				ldata->icanon);
-		spin_lock_irqsave(&tty->read_lock, flags);
+		spin_lock_irqsave(&ldata->read_lock, flags);
 		ldata->read_tail = (ldata->read_tail + n) & (N_TTY_BUF_SIZE-1);
 		ldata->read_cnt -= n;
 		/* Turn single EOF into zero-length read */
 		if (L_EXTPROC(tty) && ldata->icanon && is_eof && !ldata->read_cnt)
 			n = 0;
-		spin_unlock_irqrestore(&tty->read_lock, flags);
+		spin_unlock_irqrestore(&ldata->read_lock, flags);
 		*b += n;
 		*nr -= n;
 	}
@@ -1818,10 +1839,10 @@ do_it_again:
 	 *	Internal serialization of reads.
 	 */
 	if (file->f_flags & O_NONBLOCK) {
-		if (!mutex_trylock(&tty->atomic_read_lock))
+		if (!mutex_trylock(&ldata->atomic_read_lock))
 			return -EAGAIN;
 	} else {
-		if (mutex_lock_interruptible(&tty->atomic_read_lock))
+		if (mutex_lock_interruptible(&ldata->atomic_read_lock))
 			return -ERESTARTSYS;
 	}
 	packet = tty->packet;
@@ -1890,7 +1911,7 @@ do_it_again:
 
 		if (ldata->icanon && !L_EXTPROC(tty)) {
 			/* N.B. avoid overrun if nr == 0 */
-			spin_lock_irqsave(&tty->read_lock, flags);
+			spin_lock_irqsave(&ldata->read_lock, flags);
 			while (nr && ldata->read_cnt) {
 				int eol;
 
@@ -1908,25 +1929,25 @@ do_it_again:
 					if (--ldata->canon_data < 0)
 						ldata->canon_data = 0;
 				}
-				spin_unlock_irqrestore(&tty->read_lock, flags);
+				spin_unlock_irqrestore(&ldata->read_lock, flags);
 
 				if (!eol || (c != __DISABLED_CHAR)) {
 					if (tty_put_user(tty, c, b++)) {
 						retval = -EFAULT;
 						b--;
-						spin_lock_irqsave(&tty->read_lock, flags);
+						spin_lock_irqsave(&ldata->read_lock, flags);
 						break;
 					}
 					nr--;
 				}
 				if (eol) {
 					tty_audit_push(tty);
-					spin_lock_irqsave(&tty->read_lock, flags);
+					spin_lock_irqsave(&ldata->read_lock, flags);
 					break;
 				}
-				spin_lock_irqsave(&tty->read_lock, flags);
+				spin_lock_irqsave(&ldata->read_lock, flags);
 			}
-			spin_unlock_irqrestore(&tty->read_lock, flags);
+			spin_unlock_irqrestore(&ldata->read_lock, flags);
 			if (retval)
 				break;
 		} else {
@@ -1958,7 +1979,7 @@ do_it_again:
 		if (time)
 			timeout = time;
 	}
-	mutex_unlock(&tty->atomic_read_lock);
+	mutex_unlock(&ldata->atomic_read_lock);
 	remove_wait_queue(&tty->read_wait, &wait);
 
 	if (!waitqueue_active(&tty->read_wait))
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 67b024ca16ec..f90b6217b3ba 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -2939,11 +2939,7 @@ void initialize_tty_struct(struct tty_struct *tty,
 	init_waitqueue_head(&tty->write_wait);
 	init_waitqueue_head(&tty->read_wait);
 	INIT_WORK(&tty->hangup_work, do_tty_hangup);
-	mutex_init(&tty->atomic_read_lock);
 	mutex_init(&tty->atomic_write_lock);
-	mutex_init(&tty->output_lock);
-	mutex_init(&tty->echo_lock);
-	spin_lock_init(&tty->read_lock);
 	spin_lock_init(&tty->ctrl_lock);
 	INIT_LIST_HEAD(&tty->tty_files);
 	INIT_WORK(&tty->SAK_work, do_SAK_work);
-- 
cgit v1.2.3


From 57c941212d203979720081198ebda41f51812635 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Thu, 18 Oct 2012 22:26:43 +0200
Subject: TTY: n_tty, propagate n_tty_data

In some funtions we need only n_tty_data, so pass it down directly in
case tty is not needed there.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/n_tty.c | 171 ++++++++++++++++++++++++----------------------------
 1 file changed, 78 insertions(+), 93 deletions(-)

(limited to 'drivers')

diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 0a6fcda96152..531e539dbfcf 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -153,10 +153,8 @@ static void n_tty_set_room(struct tty_struct *tty)
 		schedule_work(&tty->buf.work);
 }
 
-static void put_tty_queue_nolock(unsigned char c, struct tty_struct *tty)
+static void put_tty_queue_nolock(unsigned char c, struct n_tty_data *ldata)
 {
-	struct n_tty_data *ldata = tty->disc_data;
-
 	if (ldata->read_cnt < N_TTY_BUF_SIZE) {
 		ldata->read_buf[ldata->read_head] = c;
 		ldata->read_head = (ldata->read_head + 1) & (N_TTY_BUF_SIZE-1);
@@ -167,23 +165,22 @@ static void put_tty_queue_nolock(unsigned char c, struct tty_struct *tty)
 /**
  *	put_tty_queue		-	add character to tty
  *	@c: character
- *	@tty: tty device
+ *	@ldata: n_tty data
  *
  *	Add a character to the tty read_buf queue. This is done under the
  *	read_lock to serialize character addition and also to protect us
  *	against parallel reads or flushes
  */
 
-static void put_tty_queue(unsigned char c, struct tty_struct *tty)
+static void put_tty_queue(unsigned char c, struct n_tty_data *ldata)
 {
-	struct n_tty_data *ldata = tty->disc_data;
 	unsigned long flags;
 	/*
 	 *	The problem of stomping on the buffers ends here.
 	 *	Why didn't anyone see this one coming? --AJK
 	*/
 	spin_lock_irqsave(&ldata->read_lock, flags);
-	put_tty_queue_nolock(c, tty);
+	put_tty_queue_nolock(c, ldata);
 	spin_unlock_irqrestore(&ldata->read_lock, flags);
 }
 
@@ -699,16 +696,15 @@ static void process_echoes(struct tty_struct *tty)
 /**
  *	add_echo_byte	-	add a byte to the echo buffer
  *	@c: unicode byte to echo
- *	@tty: terminal device
+ *	@ldata: n_tty data
  *
  *	Add a character or operation byte to the echo buffer.
  *
  *	Should be called under the echo lock to protect the echo buffer.
  */
 
-static void add_echo_byte(unsigned char c, struct tty_struct *tty)
+static void add_echo_byte(unsigned char c, struct n_tty_data *ldata)
 {
-	struct n_tty_data *ldata = tty->disc_data;
 	int	new_byte_pos;
 
 	if (ldata->echo_cnt == N_TTY_BUF_SIZE) {
@@ -746,28 +742,24 @@ static void add_echo_byte(unsigned char c, struct tty_struct *tty)
 
 /**
  *	echo_move_back_col	-	add operation to move back a column
- *	@tty: terminal device
+ *	@ldata: n_tty data
  *
  *	Add an operation to the echo buffer to move back one column.
  *
  *	Locking: echo_lock to protect the echo buffer
  */
 
-static void echo_move_back_col(struct tty_struct *tty)
+static void echo_move_back_col(struct n_tty_data *ldata)
 {
-	struct n_tty_data *ldata = tty->disc_data;
-
 	mutex_lock(&ldata->echo_lock);
-
-	add_echo_byte(ECHO_OP_START, tty);
-	add_echo_byte(ECHO_OP_MOVE_BACK_COL, tty);
-
+	add_echo_byte(ECHO_OP_START, ldata);
+	add_echo_byte(ECHO_OP_MOVE_BACK_COL, ldata);
 	mutex_unlock(&ldata->echo_lock);
 }
 
 /**
  *	echo_set_canon_col	-	add operation to set the canon column
- *	@tty: terminal device
+ *	@ldata: n_tty data
  *
  *	Add an operation to the echo buffer to set the canon column
  *	to the current column.
@@ -775,15 +767,11 @@ static void echo_move_back_col(struct tty_struct *tty)
  *	Locking: echo_lock to protect the echo buffer
  */
 
-static void echo_set_canon_col(struct tty_struct *tty)
+static void echo_set_canon_col(struct n_tty_data *ldata)
 {
-	struct n_tty_data *ldata = tty->disc_data;
-
 	mutex_lock(&ldata->echo_lock);
-
-	add_echo_byte(ECHO_OP_START, tty);
-	add_echo_byte(ECHO_OP_SET_CANON_COL, tty);
-
+	add_echo_byte(ECHO_OP_START, ldata);
+	add_echo_byte(ECHO_OP_SET_CANON_COL, ldata);
 	mutex_unlock(&ldata->echo_lock);
 }
 
@@ -791,7 +779,7 @@ static void echo_set_canon_col(struct tty_struct *tty)
  *	echo_erase_tab	-	add operation to erase a tab
  *	@num_chars: number of character columns already used
  *	@after_tab: true if num_chars starts after a previous tab
- *	@tty: terminal device
+ *	@ldata: n_tty data
  *
  *	Add an operation to the echo buffer to erase a tab.
  *
@@ -805,14 +793,12 @@ static void echo_set_canon_col(struct tty_struct *tty)
  */
 
 static void echo_erase_tab(unsigned int num_chars, int after_tab,
-			   struct tty_struct *tty)
+			   struct n_tty_data *ldata)
 {
-	struct n_tty_data *ldata = tty->disc_data;
-
 	mutex_lock(&ldata->echo_lock);
 
-	add_echo_byte(ECHO_OP_START, tty);
-	add_echo_byte(ECHO_OP_ERASE_TAB, tty);
+	add_echo_byte(ECHO_OP_START, ldata);
+	add_echo_byte(ECHO_OP_ERASE_TAB, ldata);
 
 	/* We only need to know this modulo 8 (tab spacing) */
 	num_chars &= 7;
@@ -821,7 +807,7 @@ static void echo_erase_tab(unsigned int num_chars, int after_tab,
 	if (after_tab)
 		num_chars |= 0x80;
 
-	add_echo_byte(num_chars, tty);
+	add_echo_byte(num_chars, ldata);
 
 	mutex_unlock(&ldata->echo_lock);
 }
@@ -839,19 +825,15 @@ static void echo_erase_tab(unsigned int num_chars, int after_tab,
  *	Locking: echo_lock to protect the echo buffer
  */
 
-static void echo_char_raw(unsigned char c, struct tty_struct *tty)
+static void echo_char_raw(unsigned char c, struct n_tty_data *ldata)
 {
-	struct n_tty_data *ldata = tty->disc_data;
-
 	mutex_lock(&ldata->echo_lock);
-
 	if (c == ECHO_OP_START) {
-		add_echo_byte(ECHO_OP_START, tty);
-		add_echo_byte(ECHO_OP_START, tty);
+		add_echo_byte(ECHO_OP_START, ldata);
+		add_echo_byte(ECHO_OP_START, ldata);
 	} else {
-		add_echo_byte(c, tty);
+		add_echo_byte(c, ldata);
 	}
-
 	mutex_unlock(&ldata->echo_lock);
 }
 
@@ -876,12 +858,12 @@ static void echo_char(unsigned char c, struct tty_struct *tty)
 	mutex_lock(&ldata->echo_lock);
 
 	if (c == ECHO_OP_START) {
-		add_echo_byte(ECHO_OP_START, tty);
-		add_echo_byte(ECHO_OP_START, tty);
+		add_echo_byte(ECHO_OP_START, ldata);
+		add_echo_byte(ECHO_OP_START, ldata);
 	} else {
 		if (L_ECHOCTL(tty) && iscntrl(c) && c != '\t')
-			add_echo_byte(ECHO_OP_START, tty);
-		add_echo_byte(c, tty);
+			add_echo_byte(ECHO_OP_START, ldata);
+		add_echo_byte(c, ldata);
 	}
 
 	mutex_unlock(&ldata->echo_lock);
@@ -889,14 +871,13 @@ static void echo_char(unsigned char c, struct tty_struct *tty)
 
 /**
  *	finish_erasing		-	complete erase
- *	@tty: tty doing the erase
+ *	@ldata: n_tty data
  */
 
-static inline void finish_erasing(struct tty_struct *tty)
+static inline void finish_erasing(struct n_tty_data *ldata)
 {
-	struct n_tty_data *ldata = tty->disc_data;
 	if (ldata->erasing) {
-		echo_char_raw('/', tty);
+		echo_char_raw('/', ldata);
 		ldata->erasing = 0;
 	}
 }
@@ -944,11 +925,11 @@ static void eraser(unsigned char c, struct tty_struct *tty)
 					  (N_TTY_BUF_SIZE - 1));
 			ldata->read_head = ldata->canon_head;
 			spin_unlock_irqrestore(&ldata->read_lock, flags);
-			finish_erasing(tty);
+			finish_erasing(ldata);
 			echo_char(KILL_CHAR(tty), tty);
 			/* Add a newline if ECHOK is on and ECHOKE is off. */
 			if (L_ECHOK(tty))
-				echo_char_raw('\n', tty);
+				echo_char_raw('\n', ldata);
 			return;
 		}
 		kill_type = KILL;
@@ -984,15 +965,16 @@ static void eraser(unsigned char c, struct tty_struct *tty)
 		if (L_ECHO(tty)) {
 			if (L_ECHOPRT(tty)) {
 				if (!ldata->erasing) {
-					echo_char_raw('\\', tty);
+					echo_char_raw('\\', ldata);
 					ldata->erasing = 1;
 				}
 				/* if cnt > 1, output a multi-byte character */
 				echo_char(c, tty);
 				while (--cnt > 0) {
 					head = (head+1) & (N_TTY_BUF_SIZE-1);
-					echo_char_raw(ldata->read_buf[head], tty);
-					echo_move_back_col(tty);
+					echo_char_raw(ldata->read_buf[head],
+							ldata);
+					echo_move_back_col(ldata);
 				}
 			} else if (kill_type == ERASE && !L_ECHOE(tty)) {
 				echo_char(ERASE_CHAR(tty), tty);
@@ -1021,17 +1003,17 @@ static void eraser(unsigned char c, struct tty_struct *tty)
 						num_chars++;
 					}
 				}
-				echo_erase_tab(num_chars, after_tab, tty);
+				echo_erase_tab(num_chars, after_tab, ldata);
 			} else {
 				if (iscntrl(c) && L_ECHOCTL(tty)) {
-					echo_char_raw('\b', tty);
-					echo_char_raw(' ', tty);
-					echo_char_raw('\b', tty);
+					echo_char_raw('\b', ldata);
+					echo_char_raw(' ', ldata);
+					echo_char_raw('\b', ldata);
 				}
 				if (!iscntrl(c) || L_ECHOCTL(tty)) {
-					echo_char_raw('\b', tty);
-					echo_char_raw(' ', tty);
-					echo_char_raw('\b', tty);
+					echo_char_raw('\b', ldata);
+					echo_char_raw(' ', ldata);
+					echo_char_raw('\b', ldata);
 				}
 			}
 		}
@@ -1039,7 +1021,7 @@ static void eraser(unsigned char c, struct tty_struct *tty)
 			break;
 	}
 	if (ldata->read_head == ldata->canon_head && L_ECHO(tty))
-		finish_erasing(tty);
+		finish_erasing(ldata);
 }
 
 /**
@@ -1078,6 +1060,8 @@ static inline void isig(int sig, struct tty_struct *tty, int flush)
 
 static inline void n_tty_receive_break(struct tty_struct *tty)
 {
+	struct n_tty_data *ldata = tty->disc_data;
+
 	if (I_IGNBRK(tty))
 		return;
 	if (I_BRKINT(tty)) {
@@ -1085,10 +1069,10 @@ static inline void n_tty_receive_break(struct tty_struct *tty)
 		return;
 	}
 	if (I_PARMRK(tty)) {
-		put_tty_queue('\377', tty);
-		put_tty_queue('\0', tty);
+		put_tty_queue('\377', ldata);
+		put_tty_queue('\0', ldata);
 	}
-	put_tty_queue('\0', tty);
+	put_tty_queue('\0', ldata);
 	wake_up_interruptible(&tty->read_wait);
 }
 
@@ -1132,16 +1116,18 @@ static inline void n_tty_receive_overrun(struct tty_struct *tty)
 static inline void n_tty_receive_parity_error(struct tty_struct *tty,
 					      unsigned char c)
 {
+	struct n_tty_data *ldata = tty->disc_data;
+
 	if (I_IGNPAR(tty))
 		return;
 	if (I_PARMRK(tty)) {
-		put_tty_queue('\377', tty);
-		put_tty_queue('\0', tty);
-		put_tty_queue(c, tty);
+		put_tty_queue('\377', ldata);
+		put_tty_queue('\0', ldata);
+		put_tty_queue(c, ldata);
 	} else	if (I_INPCK(tty))
-		put_tty_queue('\0', tty);
+		put_tty_queue('\0', ldata);
 	else
-		put_tty_queue(c, tty);
+		put_tty_queue(c, ldata);
 	wake_up_interruptible(&tty->read_wait);
 }
 
@@ -1162,7 +1148,7 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
 	int parmrk;
 
 	if (ldata->raw) {
-		put_tty_queue(c, tty);
+		put_tty_queue(c, ldata);
 		return;
 	}
 
@@ -1172,7 +1158,7 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
 		c = tolower(c);
 
 	if (L_EXTPROC(tty)) {
-		put_tty_queue(c, tty);
+		put_tty_queue(c, ldata);
 		return;
 	}
 
@@ -1210,16 +1196,16 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
 			return;
 		}
 		if (L_ECHO(tty)) {
-			finish_erasing(tty);
+			finish_erasing(ldata);
 			/* Record the column of first canon char. */
 			if (ldata->canon_head == ldata->read_head)
-				echo_set_canon_col(tty);
+				echo_set_canon_col(ldata);
 			echo_char(c, tty);
 			process_echoes(tty);
 		}
 		if (parmrk)
-			put_tty_queue(c, tty);
-		put_tty_queue(c, tty);
+			put_tty_queue(c, ldata);
+		put_tty_queue(c, ldata);
 		return;
 	}
 
@@ -1285,10 +1271,10 @@ send_signal:
 		if (c == LNEXT_CHAR(tty) && L_IEXTEN(tty)) {
 			ldata->lnext = 1;
 			if (L_ECHO(tty)) {
-				finish_erasing(tty);
+				finish_erasing(ldata);
 				if (L_ECHOCTL(tty)) {
-					echo_char_raw('^', tty);
-					echo_char_raw('\b', tty);
+					echo_char_raw('^', ldata);
+					echo_char_raw('\b', ldata);
 					process_echoes(tty);
 				}
 			}
@@ -1298,9 +1284,9 @@ send_signal:
 		    L_IEXTEN(tty)) {
 			unsigned long tail = ldata->canon_head;
 
-			finish_erasing(tty);
+			finish_erasing(ldata);
 			echo_char(c, tty);
-			echo_char_raw('\n', tty);
+			echo_char_raw('\n', ldata);
 			while (tail != ldata->read_head) {
 				echo_char(ldata->read_buf[tail], tty);
 				tail = (tail+1) & (N_TTY_BUF_SIZE-1);
@@ -1315,7 +1301,7 @@ send_signal:
 				return;
 			}
 			if (L_ECHO(tty) || L_ECHONL(tty)) {
-				echo_char_raw('\n', tty);
+				echo_char_raw('\n', ldata);
 				process_echoes(tty);
 			}
 			goto handle_newline;
@@ -1343,7 +1329,7 @@ send_signal:
 			if (L_ECHO(tty)) {
 				/* Record the column of first canon char. */
 				if (ldata->canon_head == ldata->read_head)
-					echo_set_canon_col(tty);
+					echo_set_canon_col(ldata);
 				echo_char(c, tty);
 				process_echoes(tty);
 			}
@@ -1352,12 +1338,12 @@ send_signal:
 			 * EOL_CHAR and EOL2_CHAR?
 			 */
 			if (parmrk)
-				put_tty_queue(c, tty);
+				put_tty_queue(c, ldata);
 
 handle_newline:
 			spin_lock_irqsave(&ldata->read_lock, flags);
 			set_bit(ldata->read_head, ldata->read_flags);
-			put_tty_queue_nolock(c, tty);
+			put_tty_queue_nolock(c, ldata);
 			ldata->canon_head = ldata->read_head;
 			ldata->canon_data++;
 			spin_unlock_irqrestore(&ldata->read_lock, flags);
@@ -1376,22 +1362,22 @@ handle_newline:
 		return;
 	}
 	if (L_ECHO(tty)) {
-		finish_erasing(tty);
+		finish_erasing(ldata);
 		if (c == '\n')
-			echo_char_raw('\n', tty);
+			echo_char_raw('\n', ldata);
 		else {
 			/* Record the column of first canon char. */
 			if (ldata->canon_head == ldata->read_head)
-				echo_set_canon_col(tty);
+				echo_set_canon_col(ldata);
 			echo_char(c, tty);
 		}
 		process_echoes(tty);
 	}
 
 	if (parmrk)
-		put_tty_queue(c, tty);
+		put_tty_queue(c, ldata);
 
-	put_tty_queue(c, tty);
+	put_tty_queue(c, ldata);
 }
 
 
@@ -2140,9 +2126,8 @@ static unsigned int n_tty_poll(struct tty_struct *tty, struct file *file,
 	return mask;
 }
 
-static unsigned long inq_canon(struct tty_struct *tty)
+static unsigned long inq_canon(struct n_tty_data *ldata)
 {
-	struct n_tty_data *ldata = tty->disc_data;
 	int nr, head, tail;
 
 	if (!ldata->canon_data)
@@ -2173,7 +2158,7 @@ static int n_tty_ioctl(struct tty_struct *tty, struct file *file,
 		/* FIXME: Locking */
 		retval = ldata->read_cnt;
 		if (L_ICANON(tty))
-			retval = inq_canon(tty);
+			retval = inq_canon(ldata);
 		return put_user(retval, (unsigned int __user *) arg);
 	default:
 		return n_tty_ioctl_helper(tty, file, cmd, arg);
-- 
cgit v1.2.3


From 2fc20661e3171d45e8e58a61eb5c6b7d8d614fde Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Thu, 18 Oct 2012 22:26:44 +0200
Subject: TTY: move TTY_FLUSH* flags to tty_port

They are only TTY buffers specific. And the buffers will go to
tty_port in the next patches. So to remove the need to have both
tty_port and tty_struct at some places, let us move the flags to
tty_port.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/tty_buffer.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

(limited to 'drivers')

diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 8b00f6a34a7d..6f366f257fba 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -134,17 +134,18 @@ static void __tty_buffer_flush(struct tty_struct *tty)
 
 void tty_buffer_flush(struct tty_struct *tty)
 {
+	struct tty_port *port = tty->port;
 	unsigned long flags;
 	spin_lock_irqsave(&tty->buf.lock, flags);
 
 	/* If the data is being pushed to the tty layer then we can't
 	   process it here. Instead set a flag and the flush_to_ldisc
 	   path will process the flush request before it exits */
-	if (test_bit(TTY_FLUSHING, &tty->flags)) {
-		set_bit(TTY_FLUSHPENDING, &tty->flags);
+	if (test_bit(TTYP_FLUSHING, &port->iflags)) {
+		set_bit(TTYP_FLUSHPENDING, &port->iflags);
 		spin_unlock_irqrestore(&tty->buf.lock, flags);
 		wait_event(tty->read_wait,
-				test_bit(TTY_FLUSHPENDING, &tty->flags) == 0);
+				test_bit(TTYP_FLUSHPENDING, &port->iflags) == 0);
 		return;
 	} else
 		__tty_buffer_flush(tty);
@@ -450,6 +451,7 @@ static void flush_to_ldisc(struct work_struct *work)
 {
 	struct tty_struct *tty =
 		container_of(work, struct tty_struct, buf.work);
+	struct tty_port *port = tty->port;
 	unsigned long 	flags;
 	struct tty_ldisc *disc;
 
@@ -459,7 +461,7 @@ static void flush_to_ldisc(struct work_struct *work)
 
 	spin_lock_irqsave(&tty->buf.lock, flags);
 
-	if (!test_and_set_bit(TTY_FLUSHING, &tty->flags)) {
+	if (!test_and_set_bit(TTYP_FLUSHING, &port->iflags)) {
 		struct tty_buffer *head;
 		while ((head = tty->buf.head) != NULL) {
 			int count;
@@ -477,7 +479,7 @@ static void flush_to_ldisc(struct work_struct *work)
 			/* Ldisc or user is trying to flush the buffers
 			   we are feeding to the ldisc, stop feeding the
 			   line discipline as we want to empty the queue */
-			if (test_bit(TTY_FLUSHPENDING, &tty->flags))
+			if (test_bit(TTYP_FLUSHPENDING, &port->iflags))
 				break;
 			if (!tty->receive_room)
 				break;
@@ -491,14 +493,14 @@ static void flush_to_ldisc(struct work_struct *work)
 							flag_buf, count);
 			spin_lock_irqsave(&tty->buf.lock, flags);
 		}
-		clear_bit(TTY_FLUSHING, &tty->flags);
+		clear_bit(TTYP_FLUSHING, &port->iflags);
 	}
 
 	/* We may have a deferred request to flush the input buffer,
 	   if so pull the chain under the lock and empty the queue */
-	if (test_bit(TTY_FLUSHPENDING, &tty->flags)) {
+	if (test_bit(TTYP_FLUSHPENDING, &port->iflags)) {
 		__tty_buffer_flush(tty);
-		clear_bit(TTY_FLUSHPENDING, &tty->flags);
+		clear_bit(TTYP_FLUSHPENDING, &port->iflags);
 		wake_up(&tty->read_wait);
 	}
 	spin_unlock_irqrestore(&tty->buf.lock, flags);
-- 
cgit v1.2.3


From 5cff39c69b57df6d7bf4e87f2963571aa4ea6336 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Thu, 18 Oct 2012 22:26:45 +0200
Subject: TTY: tty_buffer, cache pointer to tty->buf

During the move of tty buffers from tty_struct to tty_port, we will
need to switch all users of buf to tty->port->buf. There are many
functions where this is accessed directly in their code many times.
Cache the tty->buf pointer in such functions now and change only
single lines in each function in the next patch.

Not that it is convenient for the next patch, but the code is now also
more readable.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/tty_buffer.c | 132 +++++++++++++++++++++++++++--------------------
 1 file changed, 76 insertions(+), 56 deletions(-)

(limited to 'drivers')

diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 6f366f257fba..ddd74d41cbb2 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -29,17 +29,19 @@
 
 void tty_buffer_free_all(struct tty_struct *tty)
 {
+	struct tty_bufhead *buf = &tty->buf;
 	struct tty_buffer *thead;
-	while ((thead = tty->buf.head) != NULL) {
-		tty->buf.head = thead->next;
+
+	while ((thead = buf->head) != NULL) {
+		buf->head = thead->next;
 		kfree(thead);
 	}
-	while ((thead = tty->buf.free) != NULL) {
-		tty->buf.free = thead->next;
+	while ((thead = buf->free) != NULL) {
+		buf->free = thead->next;
 		kfree(thead);
 	}
-	tty->buf.tail = NULL;
-	tty->buf.memory_used = 0;
+	buf->tail = NULL;
+	buf->memory_used = 0;
 }
 
 /**
@@ -87,15 +89,17 @@ static struct tty_buffer *tty_buffer_alloc(struct tty_struct *tty, size_t size)
 
 static void tty_buffer_free(struct tty_struct *tty, struct tty_buffer *b)
 {
+	struct tty_bufhead *buf = &tty->buf;
+
 	/* Dumb strategy for now - should keep some stats */
-	tty->buf.memory_used -= b->size;
-	WARN_ON(tty->buf.memory_used < 0);
+	buf->memory_used -= b->size;
+	WARN_ON(buf->memory_used < 0);
 
 	if (b->size >= 512)
 		kfree(b);
 	else {
-		b->next = tty->buf.free;
-		tty->buf.free = b;
+		b->next = buf->free;
+		buf->free = b;
 	}
 }
 
@@ -112,13 +116,14 @@ static void tty_buffer_free(struct tty_struct *tty, struct tty_buffer *b)
 
 static void __tty_buffer_flush(struct tty_struct *tty)
 {
+	struct tty_bufhead *buf = &tty->buf;
 	struct tty_buffer *thead;
 
-	while ((thead = tty->buf.head) != NULL) {
-		tty->buf.head = thead->next;
+	while ((thead = buf->head) != NULL) {
+		buf->head = thead->next;
 		tty_buffer_free(tty, thead);
 	}
-	tty->buf.tail = NULL;
+	buf->tail = NULL;
 }
 
 /**
@@ -135,21 +140,23 @@ static void __tty_buffer_flush(struct tty_struct *tty)
 void tty_buffer_flush(struct tty_struct *tty)
 {
 	struct tty_port *port = tty->port;
+	struct tty_bufhead *buf = &tty->buf;
 	unsigned long flags;
-	spin_lock_irqsave(&tty->buf.lock, flags);
+
+	spin_lock_irqsave(&buf->lock, flags);
 
 	/* If the data is being pushed to the tty layer then we can't
 	   process it here. Instead set a flag and the flush_to_ldisc
 	   path will process the flush request before it exits */
 	if (test_bit(TTYP_FLUSHING, &port->iflags)) {
 		set_bit(TTYP_FLUSHPENDING, &port->iflags);
-		spin_unlock_irqrestore(&tty->buf.lock, flags);
+		spin_unlock_irqrestore(&buf->lock, flags);
 		wait_event(tty->read_wait,
 				test_bit(TTYP_FLUSHPENDING, &port->iflags) == 0);
 		return;
 	} else
 		__tty_buffer_flush(tty);
-	spin_unlock_irqrestore(&tty->buf.lock, flags);
+	spin_unlock_irqrestore(&buf->lock, flags);
 }
 
 /**
@@ -197,12 +204,14 @@ static struct tty_buffer *tty_buffer_find(struct tty_struct *tty, size_t size)
  */
 static int __tty_buffer_request_room(struct tty_struct *tty, size_t size)
 {
+	struct tty_bufhead *buf = &tty->buf;
 	struct tty_buffer *b, *n;
 	int left;
 	/* OPTIMISATION: We could keep a per tty "zero" sized buffer to
 	   remove this conditional if its worth it. This would be invisible
 	   to the callers */
-	if ((b = tty->buf.tail) != NULL)
+	b = buf->tail;
+	if (b != NULL)
 		left = b->size - b->used;
 	else
 		left = 0;
@@ -214,8 +223,8 @@ static int __tty_buffer_request_room(struct tty_struct *tty, size_t size)
 				b->next = n;
 				b->commit = b->used;
 			} else
-				tty->buf.head = n;
-			tty->buf.tail = n;
+				buf->head = n;
+			buf->tail = n;
 		} else
 			size = left;
 	}
@@ -262,6 +271,7 @@ EXPORT_SYMBOL_GPL(tty_buffer_request_room);
 int tty_insert_flip_string_fixed_flag(struct tty_struct *tty,
 		const unsigned char *chars, char flag, size_t size)
 {
+	struct tty_bufhead *buf = &tty->buf;
 	int copied = 0;
 	do {
 		int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE);
@@ -269,18 +279,18 @@ int tty_insert_flip_string_fixed_flag(struct tty_struct *tty,
 		unsigned long flags;
 		struct tty_buffer *tb;
 
-		spin_lock_irqsave(&tty->buf.lock, flags);
+		spin_lock_irqsave(&buf->lock, flags);
 		space = __tty_buffer_request_room(tty, goal);
-		tb = tty->buf.tail;
+		tb = buf->tail;
 		/* If there is no space then tb may be NULL */
 		if (unlikely(space == 0)) {
-			spin_unlock_irqrestore(&tty->buf.lock, flags);
+			spin_unlock_irqrestore(&buf->lock, flags);
 			break;
 		}
 		memcpy(tb->char_buf_ptr + tb->used, chars, space);
 		memset(tb->flag_buf_ptr + tb->used, flag, space);
 		tb->used += space;
-		spin_unlock_irqrestore(&tty->buf.lock, flags);
+		spin_unlock_irqrestore(&buf->lock, flags);
 		copied += space;
 		chars += space;
 		/* There is a small chance that we need to split the data over
@@ -307,6 +317,7 @@ EXPORT_SYMBOL(tty_insert_flip_string_fixed_flag);
 int tty_insert_flip_string_flags(struct tty_struct *tty,
 		const unsigned char *chars, const char *flags, size_t size)
 {
+	struct tty_bufhead *buf = &tty->buf;
 	int copied = 0;
 	do {
 		int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE);
@@ -314,18 +325,18 @@ int tty_insert_flip_string_flags(struct tty_struct *tty,
 		unsigned long __flags;
 		struct tty_buffer *tb;
 
-		spin_lock_irqsave(&tty->buf.lock, __flags);
+		spin_lock_irqsave(&buf->lock, __flags);
 		space = __tty_buffer_request_room(tty, goal);
-		tb = tty->buf.tail;
+		tb = buf->tail;
 		/* If there is no space then tb may be NULL */
 		if (unlikely(space == 0)) {
-			spin_unlock_irqrestore(&tty->buf.lock, __flags);
+			spin_unlock_irqrestore(&buf->lock, __flags);
 			break;
 		}
 		memcpy(tb->char_buf_ptr + tb->used, chars, space);
 		memcpy(tb->flag_buf_ptr + tb->used, flags, space);
 		tb->used += space;
-		spin_unlock_irqrestore(&tty->buf.lock, __flags);
+		spin_unlock_irqrestore(&buf->lock, __flags);
 		copied += space;
 		chars += space;
 		flags += space;
@@ -351,12 +362,14 @@ EXPORT_SYMBOL(tty_insert_flip_string_flags);
 
 void tty_schedule_flip(struct tty_struct *tty)
 {
+	struct tty_bufhead *buf = &tty->buf;
 	unsigned long flags;
-	spin_lock_irqsave(&tty->buf.lock, flags);
-	if (tty->buf.tail != NULL)
-		tty->buf.tail->commit = tty->buf.tail->used;
-	spin_unlock_irqrestore(&tty->buf.lock, flags);
-	schedule_work(&tty->buf.work);
+
+	spin_lock_irqsave(&buf->lock, flags);
+	if (buf->tail != NULL)
+		buf->tail->commit = buf->tail->used;
+	spin_unlock_irqrestore(&buf->lock, flags);
+	schedule_work(&buf->work);
 }
 EXPORT_SYMBOL(tty_schedule_flip);
 
@@ -378,20 +391,21 @@ EXPORT_SYMBOL(tty_schedule_flip);
 int tty_prepare_flip_string(struct tty_struct *tty, unsigned char **chars,
 								size_t size)
 {
+	struct tty_bufhead *buf = &tty->buf;
 	int space;
 	unsigned long flags;
 	struct tty_buffer *tb;
 
-	spin_lock_irqsave(&tty->buf.lock, flags);
+	spin_lock_irqsave(&buf->lock, flags);
 	space = __tty_buffer_request_room(tty, size);
 
-	tb = tty->buf.tail;
+	tb = buf->tail;
 	if (likely(space)) {
 		*chars = tb->char_buf_ptr + tb->used;
 		memset(tb->flag_buf_ptr + tb->used, TTY_NORMAL, space);
 		tb->used += space;
 	}
-	spin_unlock_irqrestore(&tty->buf.lock, flags);
+	spin_unlock_irqrestore(&buf->lock, flags);
 	return space;
 }
 EXPORT_SYMBOL_GPL(tty_prepare_flip_string);
@@ -415,20 +429,21 @@ EXPORT_SYMBOL_GPL(tty_prepare_flip_string);
 int tty_prepare_flip_string_flags(struct tty_struct *tty,
 			unsigned char **chars, char **flags, size_t size)
 {
+	struct tty_bufhead *buf = &tty->buf;
 	int space;
 	unsigned long __flags;
 	struct tty_buffer *tb;
 
-	spin_lock_irqsave(&tty->buf.lock, __flags);
+	spin_lock_irqsave(&buf->lock, __flags);
 	space = __tty_buffer_request_room(tty, size);
 
-	tb = tty->buf.tail;
+	tb = buf->tail;
 	if (likely(space)) {
 		*chars = tb->char_buf_ptr + tb->used;
 		*flags = tb->flag_buf_ptr + tb->used;
 		tb->used += space;
 	}
-	spin_unlock_irqrestore(&tty->buf.lock, __flags);
+	spin_unlock_irqrestore(&buf->lock, __flags);
 	return space;
 }
 EXPORT_SYMBOL_GPL(tty_prepare_flip_string_flags);
@@ -452,6 +467,7 @@ static void flush_to_ldisc(struct work_struct *work)
 	struct tty_struct *tty =
 		container_of(work, struct tty_struct, buf.work);
 	struct tty_port *port = tty->port;
+	struct tty_bufhead *buf = &tty->buf;
 	unsigned long 	flags;
 	struct tty_ldisc *disc;
 
@@ -459,11 +475,11 @@ static void flush_to_ldisc(struct work_struct *work)
 	if (disc == NULL)	/*  !TTY_LDISC */
 		return;
 
-	spin_lock_irqsave(&tty->buf.lock, flags);
+	spin_lock_irqsave(&buf->lock, flags);
 
 	if (!test_and_set_bit(TTYP_FLUSHING, &port->iflags)) {
 		struct tty_buffer *head;
-		while ((head = tty->buf.head) != NULL) {
+		while ((head = buf->head) != NULL) {
 			int count;
 			char *char_buf;
 			unsigned char *flag_buf;
@@ -472,7 +488,7 @@ static void flush_to_ldisc(struct work_struct *work)
 			if (!count) {
 				if (head->next == NULL)
 					break;
-				tty->buf.head = head->next;
+				buf->head = head->next;
 				tty_buffer_free(tty, head);
 				continue;
 			}
@@ -488,10 +504,10 @@ static void flush_to_ldisc(struct work_struct *work)
 			char_buf = head->char_buf_ptr + head->read;
 			flag_buf = head->flag_buf_ptr + head->read;
 			head->read += count;
-			spin_unlock_irqrestore(&tty->buf.lock, flags);
+			spin_unlock_irqrestore(&buf->lock, flags);
 			disc->ops->receive_buf(tty, char_buf,
 							flag_buf, count);
-			spin_lock_irqsave(&tty->buf.lock, flags);
+			spin_lock_irqsave(&buf->lock, flags);
 		}
 		clear_bit(TTYP_FLUSHING, &port->iflags);
 	}
@@ -503,7 +519,7 @@ static void flush_to_ldisc(struct work_struct *work)
 		clear_bit(TTYP_FLUSHPENDING, &port->iflags);
 		wake_up(&tty->read_wait);
 	}
-	spin_unlock_irqrestore(&tty->buf.lock, flags);
+	spin_unlock_irqrestore(&buf->lock, flags);
 
 	tty_ldisc_deref(disc);
 }
@@ -537,16 +553,18 @@ void tty_flush_to_ldisc(struct tty_struct *tty)
 
 void tty_flip_buffer_push(struct tty_struct *tty)
 {
+	struct tty_bufhead *buf = &tty->buf;
 	unsigned long flags;
-	spin_lock_irqsave(&tty->buf.lock, flags);
-	if (tty->buf.tail != NULL)
-		tty->buf.tail->commit = tty->buf.tail->used;
-	spin_unlock_irqrestore(&tty->buf.lock, flags);
+
+	spin_lock_irqsave(&buf->lock, flags);
+	if (buf->tail != NULL)
+		buf->tail->commit = buf->tail->used;
+	spin_unlock_irqrestore(&buf->lock, flags);
 
 	if (tty->low_latency)
-		flush_to_ldisc(&tty->buf.work);
+		flush_to_ldisc(&buf->work);
 	else
-		schedule_work(&tty->buf.work);
+		schedule_work(&buf->work);
 }
 EXPORT_SYMBOL(tty_flip_buffer_push);
 
@@ -562,11 +580,13 @@ EXPORT_SYMBOL(tty_flip_buffer_push);
 
 void tty_buffer_init(struct tty_struct *tty)
 {
-	spin_lock_init(&tty->buf.lock);
-	tty->buf.head = NULL;
-	tty->buf.tail = NULL;
-	tty->buf.free = NULL;
-	tty->buf.memory_used = 0;
-	INIT_WORK(&tty->buf.work, flush_to_ldisc);
+	struct tty_bufhead *buf = &tty->buf;
+
+	spin_lock_init(&buf->lock);
+	buf->head = NULL;
+	buf->tail = NULL;
+	buf->free = NULL;
+	buf->memory_used = 0;
+	INIT_WORK(&buf->work, flush_to_ldisc);
 }
 
-- 
cgit v1.2.3


From 967fab6916681e5ab131fdef1226327b02454f19 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Thu, 18 Oct 2012 22:26:46 +0200
Subject: TTY: add port -> tty link

For that purpose we have to temporarily introduce a second tty back
pointer into tty_port. It is because serial layer, and maybe others,
still do not use tty_port_tty_set/get. So that we cannot set the
tty_port->tty to NULL at will now.

Yes, the fix would be to convert whole serial layer and all its users
to tty_port_tty_set/get. However we are in the process of removing the
need of tty in most of the call sites, so this would lead to a
duplicated work.

Instead we have now tty_port->itty (internal tty) which will be used
only in flush_to_ldisc. For that one it is ensured that itty is valid
wherever the work is run. IOW, the work is synchronously cancelled
before we set itty to NULL and also before hangup is processed.

After we need only tty_port and not tty_struct in most code, this
shall be changed to tty_port_tty_set/get and itty removed completely.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/pty.c    | 2 ++
 drivers/tty/tty_io.c | 3 +++
 2 files changed, 5 insertions(+)

(limited to 'drivers')

diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index 2728afe52eea..c32690862671 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -345,6 +345,7 @@ static int pty_common_install(struct tty_driver *driver, struct tty_struct *tty,
 	tty_port_init(ports[1]);
 	o_tty->port = ports[0];
 	tty->port = ports[1];
+	o_tty->port->itty = o_tty;
 
 	tty_driver_kref_get(driver);
 	tty->count++;
@@ -371,6 +372,7 @@ static void pty_unix98_shutdown(struct tty_struct *tty)
 
 static void pty_cleanup(struct tty_struct *tty)
 {
+	tty->port->itty = NULL;
 	kfree(tty->port);
 }
 
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index f90b6217b3ba..202008f38ca3 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -1417,6 +1417,8 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx)
 			"%s: %s driver does not set tty->port. This will crash the kernel later. Fix the driver!\n",
 			__func__, tty->driver->name);
 
+	tty->port->itty = tty;
+
 	/*
 	 * Structures all installed ... call the ldisc open routines.
 	 * If we fail here just call release_tty to clean up.  No need
@@ -1552,6 +1554,7 @@ static void release_tty(struct tty_struct *tty, int idx)
 		tty->ops->shutdown(tty);
 	tty_free_termios(tty);
 	tty_driver_remove_tty(tty->driver, tty);
+	tty->port->itty = NULL;
 
 	if (tty->link)
 		tty_kref_put(tty->link);
-- 
cgit v1.2.3


From ecbbfd44a08fa80e0d664814efd4c187721b85f6 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Thu, 18 Oct 2012 22:26:47 +0200
Subject: TTY: move tty buffers to tty_port
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

So this is it. The big step why we did all the work over the past
kernel releases. Now everything is prepared, so nothing protects us
from doing that big step.

           |  |            \  \ nnnn/^l      |  |
           |  |             \  /     /       |  |
           |  '-,.__   =>    \/   ,-`    =>  |  '-,.__
           | O __.´´)        (  .`           | O __.´´)
            ~~~   ~~          ``              ~~~   ~~
The buffers are now in the tty_port structure and we can start
teaching the buffer helpers (insert char/string, flip etc.) to use
tty_port instead of tty_struct all around.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/n_tty.c      |   7 +++-
 drivers/tty/pty.c        |   2 +-
 drivers/tty/tty_buffer.c | 102 ++++++++++++++++++++++++-----------------------
 drivers/tty/tty_io.c     |   2 -
 drivers/tty/tty_ldisc.c  |  10 ++---
 drivers/tty/tty_port.c   |   2 +
 6 files changed, 66 insertions(+), 59 deletions(-)

(limited to 'drivers')

diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 531e539dbfcf..60b076cc4e20 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -149,8 +149,11 @@ static void n_tty_set_room(struct tty_struct *tty)
 	tty->receive_room = left;
 
 	/* Did this open up the receive buffer? We may need to flip */
-	if (left && !old_left)
-		schedule_work(&tty->buf.work);
+	if (left && !old_left) {
+		WARN_RATELIMIT(tty->port->itty == NULL,
+				"scheduling with invalid itty");
+		schedule_work(&tty->port->buf.work);
+	}
 }
 
 static void put_tty_queue_nolock(unsigned char c, struct n_tty_data *ldata)
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index c32690862671..4219f040adb8 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -93,7 +93,7 @@ static void pty_unthrottle(struct tty_struct *tty)
 
 static int pty_space(struct tty_struct *to)
 {
-	int n = 8192 - to->buf.memory_used;
+	int n = 8192 - to->port->buf.memory_used;
 	if (n < 0)
 		return 0;
 	return n;
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index ddd74d41cbb2..06725f5cc819 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -27,9 +27,9 @@
  *	Locking: none
  */
 
-void tty_buffer_free_all(struct tty_struct *tty)
+void tty_buffer_free_all(struct tty_port *port)
 {
-	struct tty_bufhead *buf = &tty->buf;
+	struct tty_bufhead *buf = &port->buf;
 	struct tty_buffer *thead;
 
 	while ((thead = buf->head) != NULL) {
@@ -56,11 +56,11 @@ void tty_buffer_free_all(struct tty_struct *tty)
  *	Locking: Caller must hold tty->buf.lock
  */
 
-static struct tty_buffer *tty_buffer_alloc(struct tty_struct *tty, size_t size)
+static struct tty_buffer *tty_buffer_alloc(struct tty_port *port, size_t size)
 {
 	struct tty_buffer *p;
 
-	if (tty->buf.memory_used + size > 65536)
+	if (port->buf.memory_used + size > 65536)
 		return NULL;
 	p = kmalloc(sizeof(struct tty_buffer) + 2 * size, GFP_ATOMIC);
 	if (p == NULL)
@@ -72,7 +72,7 @@ static struct tty_buffer *tty_buffer_alloc(struct tty_struct *tty, size_t size)
 	p->read = 0;
 	p->char_buf_ptr = (char *)(p->data);
 	p->flag_buf_ptr = (unsigned char *)p->char_buf_ptr + size;
-	tty->buf.memory_used += size;
+	port->buf.memory_used += size;
 	return p;
 }
 
@@ -87,9 +87,9 @@ static struct tty_buffer *tty_buffer_alloc(struct tty_struct *tty, size_t size)
  *	Locking: Caller must hold tty->buf.lock
  */
 
-static void tty_buffer_free(struct tty_struct *tty, struct tty_buffer *b)
+static void tty_buffer_free(struct tty_port *port, struct tty_buffer *b)
 {
-	struct tty_bufhead *buf = &tty->buf;
+	struct tty_bufhead *buf = &port->buf;
 
 	/* Dumb strategy for now - should keep some stats */
 	buf->memory_used -= b->size;
@@ -114,14 +114,14 @@ static void tty_buffer_free(struct tty_struct *tty, struct tty_buffer *b)
  *	Locking: Caller must hold tty->buf.lock
  */
 
-static void __tty_buffer_flush(struct tty_struct *tty)
+static void __tty_buffer_flush(struct tty_port *port)
 {
-	struct tty_bufhead *buf = &tty->buf;
+	struct tty_bufhead *buf = &port->buf;
 	struct tty_buffer *thead;
 
 	while ((thead = buf->head) != NULL) {
 		buf->head = thead->next;
-		tty_buffer_free(tty, thead);
+		tty_buffer_free(port, thead);
 	}
 	buf->tail = NULL;
 }
@@ -140,7 +140,7 @@ static void __tty_buffer_flush(struct tty_struct *tty)
 void tty_buffer_flush(struct tty_struct *tty)
 {
 	struct tty_port *port = tty->port;
-	struct tty_bufhead *buf = &tty->buf;
+	struct tty_bufhead *buf = &port->buf;
 	unsigned long flags;
 
 	spin_lock_irqsave(&buf->lock, flags);
@@ -155,7 +155,7 @@ void tty_buffer_flush(struct tty_struct *tty)
 				test_bit(TTYP_FLUSHPENDING, &port->iflags) == 0);
 		return;
 	} else
-		__tty_buffer_flush(tty);
+		__tty_buffer_flush(port);
 	spin_unlock_irqrestore(&buf->lock, flags);
 }
 
@@ -171,9 +171,9 @@ void tty_buffer_flush(struct tty_struct *tty)
  *	Locking: Caller must hold tty->buf.lock
  */
 
-static struct tty_buffer *tty_buffer_find(struct tty_struct *tty, size_t size)
+static struct tty_buffer *tty_buffer_find(struct tty_port *port, size_t size)
 {
-	struct tty_buffer **tbh = &tty->buf.free;
+	struct tty_buffer **tbh = &port->buf.free;
 	while ((*tbh) != NULL) {
 		struct tty_buffer *t = *tbh;
 		if (t->size >= size) {
@@ -182,14 +182,14 @@ static struct tty_buffer *tty_buffer_find(struct tty_struct *tty, size_t size)
 			t->used = 0;
 			t->commit = 0;
 			t->read = 0;
-			tty->buf.memory_used += t->size;
+			port->buf.memory_used += t->size;
 			return t;
 		}
 		tbh = &((*tbh)->next);
 	}
 	/* Round the buffer size out */
 	size = (size + 0xFF) & ~0xFF;
-	return tty_buffer_alloc(tty, size);
+	return tty_buffer_alloc(port, size);
 	/* Should possibly check if this fails for the largest buffer we
 	   have queued and recycle that ? */
 }
@@ -200,11 +200,11 @@ static struct tty_buffer *tty_buffer_find(struct tty_struct *tty, size_t size)
  *
  *	Make at least size bytes of linear space available for the tty
  *	buffer. If we fail return the size we managed to find.
- *      Locking: Caller must hold tty->buf.lock
+ *      Locking: Caller must hold port->buf.lock
  */
-static int __tty_buffer_request_room(struct tty_struct *tty, size_t size)
+static int __tty_buffer_request_room(struct tty_port *port, size_t size)
 {
-	struct tty_bufhead *buf = &tty->buf;
+	struct tty_bufhead *buf = &port->buf;
 	struct tty_buffer *b, *n;
 	int left;
 	/* OPTIMISATION: We could keep a per tty "zero" sized buffer to
@@ -218,7 +218,7 @@ static int __tty_buffer_request_room(struct tty_struct *tty, size_t size)
 
 	if (left < size) {
 		/* This is the slow path - looking for new buffers to use */
-		if ((n = tty_buffer_find(tty, size)) != NULL) {
+		if ((n = tty_buffer_find(port, size)) != NULL) {
 			if (b != NULL) {
 				b->next = n;
 				b->commit = b->used;
@@ -241,16 +241,17 @@ static int __tty_buffer_request_room(struct tty_struct *tty, size_t size)
  *	Make at least size bytes of linear space available for the tty
  *	buffer. If we fail return the size we managed to find.
  *
- *	Locking: Takes tty->buf.lock
+ *	Locking: Takes port->buf.lock
  */
 int tty_buffer_request_room(struct tty_struct *tty, size_t size)
 {
+	struct tty_port *port = tty->port;
 	unsigned long flags;
 	int length;
 
-	spin_lock_irqsave(&tty->buf.lock, flags);
-	length = __tty_buffer_request_room(tty, size);
-	spin_unlock_irqrestore(&tty->buf.lock, flags);
+	spin_lock_irqsave(&port->buf.lock, flags);
+	length = __tty_buffer_request_room(port, size);
+	spin_unlock_irqrestore(&port->buf.lock, flags);
 	return length;
 }
 EXPORT_SYMBOL_GPL(tty_buffer_request_room);
@@ -265,13 +266,13 @@ EXPORT_SYMBOL_GPL(tty_buffer_request_room);
  *	Queue a series of bytes to the tty buffering. All the characters
  *	passed are marked with the supplied flag. Returns the number added.
  *
- *	Locking: Called functions may take tty->buf.lock
+ *	Locking: Called functions may take port->buf.lock
  */
 
 int tty_insert_flip_string_fixed_flag(struct tty_struct *tty,
 		const unsigned char *chars, char flag, size_t size)
 {
-	struct tty_bufhead *buf = &tty->buf;
+	struct tty_bufhead *buf = &tty->port->buf;
 	int copied = 0;
 	do {
 		int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE);
@@ -280,7 +281,7 @@ int tty_insert_flip_string_fixed_flag(struct tty_struct *tty,
 		struct tty_buffer *tb;
 
 		spin_lock_irqsave(&buf->lock, flags);
-		space = __tty_buffer_request_room(tty, goal);
+		space = __tty_buffer_request_room(tty->port, goal);
 		tb = buf->tail;
 		/* If there is no space then tb may be NULL */
 		if (unlikely(space == 0)) {
@@ -311,13 +312,13 @@ EXPORT_SYMBOL(tty_insert_flip_string_fixed_flag);
  *	the flags array indicates the status of the character. Returns the
  *	number added.
  *
- *	Locking: Called functions may take tty->buf.lock
+ *	Locking: Called functions may take port->buf.lock
  */
 
 int tty_insert_flip_string_flags(struct tty_struct *tty,
 		const unsigned char *chars, const char *flags, size_t size)
 {
-	struct tty_bufhead *buf = &tty->buf;
+	struct tty_bufhead *buf = &tty->port->buf;
 	int copied = 0;
 	do {
 		int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE);
@@ -326,7 +327,7 @@ int tty_insert_flip_string_flags(struct tty_struct *tty,
 		struct tty_buffer *tb;
 
 		spin_lock_irqsave(&buf->lock, __flags);
-		space = __tty_buffer_request_room(tty, goal);
+		space = __tty_buffer_request_room(tty->port, goal);
 		tb = buf->tail;
 		/* If there is no space then tb may be NULL */
 		if (unlikely(space == 0)) {
@@ -357,12 +358,12 @@ EXPORT_SYMBOL(tty_insert_flip_string_flags);
  *	Note that this function can only be used when the low_latency flag
  *	is unset. Otherwise the workqueue won't be flushed.
  *
- *	Locking: Takes tty->buf.lock
+ *	Locking: Takes port->buf.lock
  */
 
 void tty_schedule_flip(struct tty_struct *tty)
 {
-	struct tty_bufhead *buf = &tty->buf;
+	struct tty_bufhead *buf = &tty->port->buf;
 	unsigned long flags;
 
 	spin_lock_irqsave(&buf->lock, flags);
@@ -385,19 +386,19 @@ EXPORT_SYMBOL(tty_schedule_flip);
  *	that need their own block copy routines into the buffer. There is no
  *	guarantee the buffer is a DMA target!
  *
- *	Locking: May call functions taking tty->buf.lock
+ *	Locking: May call functions taking port->buf.lock
  */
 
 int tty_prepare_flip_string(struct tty_struct *tty, unsigned char **chars,
-								size_t size)
+		size_t size)
 {
-	struct tty_bufhead *buf = &tty->buf;
+	struct tty_bufhead *buf = &tty->port->buf;
 	int space;
 	unsigned long flags;
 	struct tty_buffer *tb;
 
 	spin_lock_irqsave(&buf->lock, flags);
-	space = __tty_buffer_request_room(tty, size);
+	space = __tty_buffer_request_room(tty->port, size);
 
 	tb = buf->tail;
 	if (likely(space)) {
@@ -423,19 +424,19 @@ EXPORT_SYMBOL_GPL(tty_prepare_flip_string);
  *	that need their own block copy routines into the buffer. There is no
  *	guarantee the buffer is a DMA target!
  *
- *	Locking: May call functions taking tty->buf.lock
+ *	Locking: May call functions taking port->buf.lock
  */
 
 int tty_prepare_flip_string_flags(struct tty_struct *tty,
 			unsigned char **chars, char **flags, size_t size)
 {
-	struct tty_bufhead *buf = &tty->buf;
+	struct tty_bufhead *buf = &tty->port->buf;
 	int space;
 	unsigned long __flags;
 	struct tty_buffer *tb;
 
 	spin_lock_irqsave(&buf->lock, __flags);
-	space = __tty_buffer_request_room(tty, size);
+	space = __tty_buffer_request_room(tty->port, size);
 
 	tb = buf->tail;
 	if (likely(space)) {
@@ -464,13 +465,16 @@ EXPORT_SYMBOL_GPL(tty_prepare_flip_string_flags);
 
 static void flush_to_ldisc(struct work_struct *work)
 {
-	struct tty_struct *tty =
-		container_of(work, struct tty_struct, buf.work);
-	struct tty_port *port = tty->port;
-	struct tty_bufhead *buf = &tty->buf;
+	struct tty_port *port = container_of(work, struct tty_port, buf.work);
+	struct tty_bufhead *buf = &port->buf;
+	struct tty_struct *tty;
 	unsigned long 	flags;
 	struct tty_ldisc *disc;
 
+	tty = port->itty;
+	if (WARN_RATELIMIT(tty == NULL, "tty is NULL"))
+		return;
+
 	disc = tty_ldisc_ref(tty);
 	if (disc == NULL)	/*  !TTY_LDISC */
 		return;
@@ -489,7 +493,7 @@ static void flush_to_ldisc(struct work_struct *work)
 				if (head->next == NULL)
 					break;
 				buf->head = head->next;
-				tty_buffer_free(tty, head);
+				tty_buffer_free(port, head);
 				continue;
 			}
 			/* Ldisc or user is trying to flush the buffers
@@ -515,7 +519,7 @@ static void flush_to_ldisc(struct work_struct *work)
 	/* We may have a deferred request to flush the input buffer,
 	   if so pull the chain under the lock and empty the queue */
 	if (test_bit(TTYP_FLUSHPENDING, &port->iflags)) {
-		__tty_buffer_flush(tty);
+		__tty_buffer_flush(port);
 		clear_bit(TTYP_FLUSHPENDING, &port->iflags);
 		wake_up(&tty->read_wait);
 	}
@@ -535,7 +539,7 @@ static void flush_to_ldisc(struct work_struct *work)
 void tty_flush_to_ldisc(struct tty_struct *tty)
 {
 	if (!tty->low_latency)
-		flush_work(&tty->buf.work);
+		flush_work(&tty->port->buf.work);
 }
 
 /**
@@ -553,7 +557,7 @@ void tty_flush_to_ldisc(struct tty_struct *tty)
 
 void tty_flip_buffer_push(struct tty_struct *tty)
 {
-	struct tty_bufhead *buf = &tty->buf;
+	struct tty_bufhead *buf = &tty->port->buf;
 	unsigned long flags;
 
 	spin_lock_irqsave(&buf->lock, flags);
@@ -578,9 +582,9 @@ EXPORT_SYMBOL(tty_flip_buffer_push);
  *	Locking: none
  */
 
-void tty_buffer_init(struct tty_struct *tty)
+void tty_buffer_init(struct tty_port *port)
 {
-	struct tty_bufhead *buf = &tty->buf;
+	struct tty_bufhead *buf = &port->buf;
 
 	spin_lock_init(&buf->lock);
 	buf->head = NULL;
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 202008f38ca3..a3eba7f359ed 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -186,7 +186,6 @@ void free_tty_struct(struct tty_struct *tty)
 	if (tty->dev)
 		put_device(tty->dev);
 	kfree(tty->write_buf);
-	tty_buffer_free_all(tty);
 	tty->magic = 0xDEADDEAD;
 	kfree(tty);
 }
@@ -2935,7 +2934,6 @@ void initialize_tty_struct(struct tty_struct *tty,
 	tty_ldisc_init(tty);
 	tty->session = NULL;
 	tty->pgrp = NULL;
-	tty_buffer_init(tty);
 	mutex_init(&tty->legacy_mutex);
 	mutex_init(&tty->termios_mutex);
 	mutex_init(&tty->ldisc_mutex);
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 47e3968df10b..f4e6754525dc 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -512,7 +512,7 @@ static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old)
 static int tty_ldisc_halt(struct tty_struct *tty)
 {
 	clear_bit(TTY_LDISC, &tty->flags);
-	return cancel_work_sync(&tty->buf.work);
+	return cancel_work_sync(&tty->port->buf.work);
 }
 
 /**
@@ -525,7 +525,7 @@ static void tty_ldisc_flush_works(struct tty_struct *tty)
 {
 	flush_work(&tty->hangup_work);
 	flush_work(&tty->SAK_work);
-	flush_work(&tty->buf.work);
+	flush_work(&tty->port->buf.work);
 }
 
 /**
@@ -704,9 +704,9 @@ enable:
 	/* Restart the work queue in case no characters kick it off. Safe if
 	   already running */
 	if (work)
-		schedule_work(&tty->buf.work);
+		schedule_work(&tty->port->buf.work);
 	if (o_work)
-		schedule_work(&o_tty->buf.work);
+		schedule_work(&o_tty->port->buf.work);
 	mutex_unlock(&tty->ldisc_mutex);
 	tty_unlock(tty);
 	return retval;
@@ -817,7 +817,7 @@ void tty_ldisc_hangup(struct tty_struct *tty)
 	 */
 	clear_bit(TTY_LDISC, &tty->flags);
 	tty_unlock(tty);
-	cancel_work_sync(&tty->buf.work);
+	cancel_work_sync(&tty->port->buf.work);
 	mutex_unlock(&tty->ldisc_mutex);
 retry:
 	tty_lock(tty);
diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c
index d7bdd8d0c23f..416b42f7c346 100644
--- a/drivers/tty/tty_port.c
+++ b/drivers/tty/tty_port.c
@@ -21,6 +21,7 @@
 void tty_port_init(struct tty_port *port)
 {
 	memset(port, 0, sizeof(*port));
+	tty_buffer_init(port);
 	init_waitqueue_head(&port->open_wait);
 	init_waitqueue_head(&port->close_wait);
 	init_waitqueue_head(&port->delta_msr_wait);
@@ -126,6 +127,7 @@ static void tty_port_destructor(struct kref *kref)
 	struct tty_port *port = container_of(kref, struct tty_port, kref);
 	if (port->xmit_buf)
 		free_page((unsigned long)port->xmit_buf);
+	tty_buffer_free_all(port);
 	if (port->ops->destruct)
 		port->ops->destruct(port);
 	else
-- 
cgit v1.2.3


From b8b345bae8cb6745f2afdd28bb2d93f9cf0d7f2c Mon Sep 17 00:00:00 2001
From: Ivo Sieben <meltedpianoman@gmail.com>
Date: Wed, 24 Oct 2012 14:35:42 +0200
Subject: TTY: Report warning when low_latency flag is wrongly used

When a driver has the low_latency flag set and uses the schedule_flip()
function to initiate copying data to the line discipline, a workqueue is
scheduled in but never actually flushed. This is incorrect use of the
low_latency flag (driver should not support the low_latency flag, or use
the tty_flip_buffer_push() function instead). Make sure a warning is
reported to catch incorrect use of the low_latency flag.

This patch goes with: cee4ad1ed90a0959fc29f9d30a2526e5e9522cfa

Signed-off-by: Ivo Sieben <meltedpianoman@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/tty_buffer.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers')

diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 06725f5cc819..6cf87d7afb7e 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -365,6 +365,7 @@ void tty_schedule_flip(struct tty_struct *tty)
 {
 	struct tty_bufhead *buf = &tty->port->buf;
 	unsigned long flags;
+	WARN_ON(tty->low_latency);
 
 	spin_lock_irqsave(&buf->lock, flags);
 	if (buf->tail != NULL)
-- 
cgit v1.2.3


From 9484b009b57b6523a5c7477a899f4438942febde Mon Sep 17 00:00:00 2001
From: Thomas Abraham <thomas.abraham@linaro.org>
Date: Wed, 3 Oct 2012 07:40:04 +0900
Subject: serial: samsung: use clk_prepare_enable and clk_disable_unprepare

Convert clk_enable/clk_disable to clk_prepare_enable/clk_disable_unprepare
calls as required by common clock framework.

Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/samsung.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

(limited to 'drivers')

diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 7f04717176aa..740458ca62cc 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -530,16 +530,16 @@ static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
 	switch (level) {
 	case 3:
 		if (!IS_ERR(ourport->baudclk))
-			clk_disable(ourport->baudclk);
+			clk_disable_unprepare(ourport->baudclk);
 
-		clk_disable(ourport->clk);
+		clk_disable_unprepare(ourport->clk);
 		break;
 
 	case 0:
-		clk_enable(ourport->clk);
+		clk_prepare_enable(ourport->clk);
 
 		if (!IS_ERR(ourport->baudclk))
-			clk_enable(ourport->baudclk);
+			clk_prepare_enable(ourport->baudclk);
 
 		break;
 	default:
@@ -713,11 +713,11 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
 		s3c24xx_serial_setsource(port, clk_sel);
 
 		if (!IS_ERR(ourport->baudclk)) {
-			clk_disable(ourport->baudclk);
+			clk_disable_unprepare(ourport->baudclk);
 			ourport->baudclk = ERR_PTR(-EINVAL);
 		}
 
-		clk_enable(clk);
+		clk_prepare_enable(clk);
 
 		ourport->baudclk = clk;
 		ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0;
@@ -1287,9 +1287,9 @@ static int s3c24xx_serial_resume(struct device *dev)
 	struct s3c24xx_uart_port *ourport = to_ourport(port);
 
 	if (port) {
-		clk_enable(ourport->clk);
+		clk_prepare_enable(ourport->clk);
 		s3c24xx_serial_resetport(port, s3c24xx_port_to_cfg(port));
-		clk_disable(ourport->clk);
+		clk_disable_unprepare(ourport->clk);
 
 		uart_resume_port(&s3c24xx_uart_drv, port);
 	}
-- 
cgit v1.2.3


From b15d5380e471f9ce27180b14d5080abc2e2f30ec Mon Sep 17 00:00:00 2001
From: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Date: Wed, 3 Oct 2012 16:27:43 +0400
Subject: serial/8250/8250_early: Prevent rounding error in uartclk

Modify divisor to select the nearest baud rate divider rather than the
lowest. It minimizes baud rate errors especially on low UART clock
frequencies.

For example, if uartclk is 33000000 and baud is 115200 the ratio is
about 17.9 The current code selects 17 (5% error) but should select 18
(0.5% error).

This 5% error in baud rate leads to garbage on receiving end, while 0.5%
doesn't.

The issue showed up when using the stock 8250 driver for
Synopsys DW UART. This was on a FPGA with ~12MHz UART clock.
When we enabled early serial, we saw garbage which was narrowed down
to the rounding error.

So the bug had been latent and it only showed up with such low clock rates.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250_early.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index eaafb98debed..843a150ba105 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -140,7 +140,7 @@ static void __init init_port(struct early_serial8250_device *device)
 	serial_out(port, UART_FCR, 0);		/* no fifo */
 	serial_out(port, UART_MCR, 0x3);	/* DTR + RTS */
 
-	divisor = port->uartclk / (16 * device->baud);
+	divisor = DIV_ROUND_CLOSEST(port->uartclk, 16 * device->baud);
 	c = serial_in(port, UART_LCR);
 	serial_out(port, UART_LCR, c | UART_LCR_DLAB);
 	serial_out(port, UART_DLL, divisor & 0xff);
-- 
cgit v1.2.3


From 54ec52b6dd3b0ba4bc4eb97e7e1b2534705b326c Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Wed, 3 Oct 2012 15:31:58 -0700
Subject: tty/serial/8250: Make omap hardware workarounds local to 8250.h

This allows us to get rid of the ifdefs in 8250.c.

Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250.c |  9 +++------
 drivers/tty/serial/8250/8250.h | 36 ++++++++++++++++++++++++++++++++++++
 2 files changed, 39 insertions(+), 6 deletions(-)

(limited to 'drivers')

diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c
index 3ba4234592bc..5ccbd90540cf 100644
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250.c
@@ -2349,16 +2349,14 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
 			serial_port_out(port, UART_EFR, efr);
 	}
 
-#ifdef CONFIG_ARCH_OMAP1
 	/* Workaround to enable 115200 baud on OMAP1510 internal ports */
-	if (cpu_is_omap1510() && is_omap_port(up)) {
+	if (is_omap1510_8250(up)) {
 		if (baud == 115200) {
 			quot = 1;
 			serial_port_out(port, UART_OMAP_OSC_12M_SEL, 1);
 		} else
 			serial_port_out(port, UART_OMAP_OSC_12M_SEL, 0);
 	}
-#endif
 
 	/*
 	 * For NatSemi, switch to bank 2 not bank 1, to avoid resetting EXCR2,
@@ -2439,10 +2437,9 @@ static unsigned int serial8250_port_size(struct uart_8250_port *pt)
 {
 	if (pt->port.iotype == UPIO_AU)
 		return 0x1000;
-#ifdef CONFIG_ARCH_OMAP1
-	if (is_omap_port(pt))
+	if (is_omap1_8250(pt))
 		return 0x16 << pt->port.regshift;
-#endif
+
 	return 8 << pt->port.regshift;
 }
 
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index 5a76f9c8d36b..3b4ea84898c2 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -106,3 +106,39 @@ static inline int serial8250_pnp_init(void) { return 0; }
 static inline void serial8250_pnp_exit(void) { }
 #endif
 
+#ifdef CONFIG_ARCH_OMAP1
+static inline int is_omap1_8250(struct uart_8250_port *pt)
+{
+	int res;
+
+	switch (pt->port.mapbase) {
+	case OMAP1_UART1_BASE:
+	case OMAP1_UART2_BASE:
+	case OMAP1_UART3_BASE:
+		res = 1;
+		break;
+	default:
+		res = 0;
+		break;
+	}
+
+	return res;
+}
+
+static inline int is_omap1510_8250(struct uart_8250_port *pt)
+{
+	if (!cpu_is_omap1510())
+		return 0;
+
+	return is_omap1_8250(pt);
+}
+#else
+static inline int is_omap1_8250(struct uart_8250_port *pt)
+{
+	return 0;
+}
+static inline int is_omap1510_8250(struct uart_8250_port *pt)
+{
+	return 0;
+}
+#endif
-- 
cgit v1.2.3


From e8c4a7acc9ec0ee82feedcdc3c6d0ee44d67918a Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Wed, 24 Oct 2012 14:26:19 -0700
Subject: ARM: OMAP: move OMAP USB platform data to
 <linux/platform_data/omap-usb.h>

In order to make single zImage work for ARM architecture,
we need to make sure we don't depend on private headers.

Move USB platform_data to <linux/platform_data/omap-usb.h>
and add a minimal drivers/mfd/usb-omap.h.

Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Partha Basak <parthab@india.ti.com>
Cc: Keshava Munegowda <keshava_mgowda@ti.com>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Felipe Balbi <balbi@ti.com>
[tony@atomide.com: updated for local mfd/usb-omap.h]
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/mfd/omap-usb-host.c   | 5 ++++-
 drivers/mfd/omap-usb-tll.c    | 2 +-
 drivers/mfd/omap-usb.h        | 2 ++
 drivers/usb/host/ehci-omap.c  | 3 ++-
 drivers/usb/host/ohci-omap3.c | 1 -
 drivers/usb/musb/am35x.c      | 3 +--
 drivers/usb/musb/musb_dsps.c  | 3 +--
 drivers/usb/musb/omap2430.h   | 2 +-
 8 files changed, 12 insertions(+), 9 deletions(-)
 create mode 100644 drivers/mfd/omap-usb.h

(limited to 'drivers')

diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 23cec57c02ba..cebfe0a68aa7 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -26,9 +26,12 @@
 #include <linux/spinlock.h>
 #include <linux/gpio.h>
 #include <plat/cpu.h>
-#include <plat/usb.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/usb-omap.h>
 #include <linux/pm_runtime.h>
 
+#include "omap-usb.h"
+
 #define USBHS_DRIVER_NAME	"usbhs_omap"
 #define OMAP_EHCI_DEVICE	"ehci-omap"
 #define OMAP_OHCI_DEVICE	"ohci-omap3"
diff --git a/drivers/mfd/omap-usb-tll.c b/drivers/mfd/omap-usb-tll.c
index 4b7757b84301..0db0dfa3d08c 100644
--- a/drivers/mfd/omap-usb-tll.c
+++ b/drivers/mfd/omap-usb-tll.c
@@ -25,8 +25,8 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/err.h>
-#include <plat/usb.h>
 #include <linux/pm_runtime.h>
+#include <linux/platform_data/usb-omap.h>
 
 #define USBTLL_DRIVER_NAME	"usbhs_tll"
 
diff --git a/drivers/mfd/omap-usb.h b/drivers/mfd/omap-usb.h
new file mode 100644
index 000000000000..972aa961b064
--- /dev/null
+++ b/drivers/mfd/omap-usb.h
@@ -0,0 +1,2 @@
+extern int omap_tll_enable(void);
+extern int omap_tll_disable(void);
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index d7fe287d0678..0d5ac36fdf47 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -39,12 +39,13 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/usb/ulpi.h>
-#include <plat/usb.h>
 #include <linux/regulator/consumer.h>
 #include <linux/pm_runtime.h>
 #include <linux/gpio.h>
 #include <linux/clk.h>
 
+#include <linux/platform_data/usb-omap.h>
+
 /* EHCI Register Set */
 #define EHCI_INSNREG04					(0xA0)
 #define EHCI_INSNREG04_DISABLE_UNSUSPEND		(1 << 5)
diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c
index 1b8133b6e451..bd7803dce9be 100644
--- a/drivers/usb/host/ohci-omap3.c
+++ b/drivers/usb/host/ohci-omap3.c
@@ -30,7 +30,6 @@
  */
 
 #include <linux/platform_device.h>
-#include <plat/usb.h>
 #include <linux/pm_runtime.h>
 
 /*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
index c964d6af178b..a87cdd2387cf 100644
--- a/drivers/usb/musb/am35x.c
+++ b/drivers/usb/musb/am35x.c
@@ -34,8 +34,7 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/usb/nop-usb-xceiv.h>
-
-#include <plat/usb.h>
+#include <linux/platform_data/usb-omap.h>
 
 #include "musb_core.h"
 
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 444346e1e10d..a67af21c1460 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -38,13 +38,12 @@
 #include <linux/pm_runtime.h>
 #include <linux/module.h>
 #include <linux/usb/nop-usb-xceiv.h>
+#include <linux/platform_data/usb-omap.h>
 
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_address.h>
 
-#include <plat/usb.h>
-
 #include "musb_core.h"
 
 #ifdef CONFIG_OF
diff --git a/drivers/usb/musb/omap2430.h b/drivers/usb/musb/omap2430.h
index b85f3973e78c..8ef656659fcb 100644
--- a/drivers/usb/musb/omap2430.h
+++ b/drivers/usb/musb/omap2430.h
@@ -10,7 +10,7 @@
 #ifndef __MUSB_OMAP243X_H__
 #define __MUSB_OMAP243X_H__
 
-#include <plat/usb.h>
+#include <linux/platform_data/usb-omap.h>
 
 /*
  * OMAP2430-specific definitions
-- 
cgit v1.2.3


From ea5d8f42a3ae7fd7a78369970772021a6d68ae15 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Fri, 26 Oct 2012 13:16:30 -0600
Subject: ARM: OMAP2+: fix build breakage introduced by commit
 b7754452b3e27716347a528b47b0a1083af32520

Commit b7754452b3e27716347a528b47b0a1083af32520 ("mtd: onenand: omap:
use pdata info instead of cpu_is") broke an OMAP3+4 build and an N800
multi-OMAP2xxx build here:

drivers/built-in.o: In function `omap2_onenand_probe':
drivers/mtd/onenand/omap2.c:742: undefined reference to `omap2_onenand_read_bufferram'
drivers/mtd/onenand/omap2.c:743: undefined reference to `omap2_onenand_write_bufferram'
drivers/mtd/onenand/omap2.c:742: undefined reference to `omap2_onenand_read_bufferram'
drivers/mtd/onenand/omap2.c:743: undefined reference to `omap2_onenand_write_bufferram'

...

drivers/built-in.o: In function `omap2_onenand_probe':
drivers/mtd/onenand/omap2.c:788: undefined reference to `omap3_onenand_read_bufferram'
drivers/mtd/onenand/omap2.c:788: undefined reference to `omap3_onenand_write_bufferram'

Fix by declaring static functions for the missing symbols, rather than
just prototypes.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Afzal Mohammed <afzal@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
---
 drivers/mtd/onenand/omap2.c | 36 ++++++++++++++++++++++++------------
 1 file changed, 24 insertions(+), 12 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index 53069aef1f48..99f96e19ebea 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -445,13 +445,19 @@ out_copy:
 
 #else
 
-int omap3_onenand_read_bufferram(struct mtd_info *mtd, int area,
-				 unsigned char *buffer, int offset,
-				 size_t count);
+static int omap3_onenand_read_bufferram(struct mtd_info *mtd, int area,
+					unsigned char *buffer, int offset,
+					size_t count)
+{
+	return -ENOSYS;
+}
 
-int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area,
-				  const unsigned char *buffer,
-				  int offset, size_t count);
+static int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area,
+					 const unsigned char *buffer,
+					 int offset, size_t count)
+{
+	return -ENOSYS;
+}
 
 #endif
 
@@ -549,13 +555,19 @@ static int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area,
 
 #else
 
-int omap2_onenand_read_bufferram(struct mtd_info *mtd, int area,
-				 unsigned char *buffer, int offset,
-				 size_t count);
+static int omap2_onenand_read_bufferram(struct mtd_info *mtd, int area,
+					unsigned char *buffer, int offset,
+					size_t count)
+{
+	return -ENOSYS;
+}
 
-int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area,
-				  const unsigned char *buffer,
-				  int offset, size_t count);
+static int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area,
+					 const unsigned char *buffer,
+					 int offset, size_t count)
+{
+	return -ENOSYS;
+}
 
 #endif
 
-- 
cgit v1.2.3


From 6e740f9a85339c295af8deb5376511fcb2a268ad Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 29 Oct 2012 15:20:45 -0700
Subject: ARM: OMAP: Move omap-pm-noop.c local to mach-omap2

This code should be private to mach-omap2.

The only use for it in for omap1 has been in dmtimer.c
to check for context loss. However, omap1 does not
lose context during idle, so the code is not needed.
Further, omap1 timer has OMAP_TIMER_ALWON set, so omap1
was not hitting omap_pm_get_dev_context_loss_count()
test.

Cc: Jon Hunter <jon-hunter@ti.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/media/platform/omap3isp/ispvideo.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/media/platform/omap3isp/ispvideo.c b/drivers/media/platform/omap3isp/ispvideo.c
index a0b737fecf13..5bd40e6870cc 100644
--- a/drivers/media/platform/omap3isp/ispvideo.c
+++ b/drivers/media/platform/omap3isp/ispvideo.c
@@ -36,7 +36,6 @@
 #include <media/v4l2-ioctl.h>
 #include <plat/iommu.h>
 #include <plat/iovmm.h>
-#include <plat/omap-pm.h>
 
 #include "ispvideo.h"
 #include "isp.h"
-- 
cgit v1.2.3


From 8280960181eae6e4039957044577b6ef7154220f Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Tue, 30 Oct 2012 11:03:22 -0700
Subject: ARM: OMAP: Remove cpu_is_omap usage from plat-omap/dma.c

This code will be eventually in drivers, and for the
code in the drivers we don't want to have any cpu_is_omap
usage. Those macros should be private to arch/arm/mach-omap1
and arch/arm/mach-omap2.

To fix this, let's move the define for dma_omap2plus()
to dma-omap.h, and use the existing dma_attr passed in
the platform_data as the revision registers are what they
are.

Note that we can now also remove the relative includes
introduced by the recent clean-up patches.

Cc: Russell King <linux@arm.linux.org.uk>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/dma/omap-dma.c | 6 ------
 1 file changed, 6 deletions(-)

(limited to 'drivers')

diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c
index 56d925312a5c..7d35c237fbf1 100644
--- a/drivers/dma/omap-dma.c
+++ b/drivers/dma/omap-dma.c
@@ -21,12 +21,6 @@
 
 #include <plat-omap/dma-omap.h>
 
-#ifdef CONFIG_ARCH_OMAP2PLUS
-#define dma_omap2plus()	1
-#else
-#define dma_omap2plus()	0
-#endif
-
 struct omap_dmadev {
 	struct dma_device ddev;
 	spinlock_t lock;
-- 
cgit v1.2.3