From 9e50bc14a7f58b5d8a55973b2d69355852ae2dae Mon Sep 17 00:00:00 2001 From: Lan Tianyu Date: Sun, 4 May 2014 14:07:06 +0800 Subject: ACPI / battery: Accelerate battery resume callback Most time of battery resume callback is spent on executing AML code _BTP, _BIF and _BIF to get battery info, status and set alarm. These AML methods may access EC operation regions several times and consumes time. These operations are not necessary during devices resume and can run during POST_SUSPEND/HIBERNATION event when all processes are thawed. This also can avoid removing and adding battery sysfs nodes every system resume even if the battery unit is not actually changed. The original code updates sysfs nodes without check and this seems not reasonable. Signed-off-by: Lan Tianyu Signed-off-by: Rafael J. Wysocki --- drivers/acpi/battery.c | 36 +++++++++++++++++++++++++++--------- 1 file changed, 27 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index 6e7b2a12860d..3b4921e4dc4e 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -696,7 +696,7 @@ static void acpi_battery_quirks(struct acpi_battery *battery) } } -static int acpi_battery_update(struct acpi_battery *battery) +static int acpi_battery_update(struct acpi_battery *battery, bool resume) { int result, old_present = acpi_battery_present(battery); result = acpi_battery_get_status(battery); @@ -707,6 +707,10 @@ static int acpi_battery_update(struct acpi_battery *battery) battery->update_time = 0; return 0; } + + if (resume) + return 0; + if (!battery->update_time || old_present != acpi_battery_present(battery)) { result = acpi_battery_get_info(battery); @@ -915,7 +919,7 @@ static print_func acpi_print_funcs[ACPI_BATTERY_NUMFILES] = { static int acpi_battery_read(int fid, struct seq_file *seq) { struct acpi_battery *battery = seq->private; - int result = acpi_battery_update(battery); + int result = acpi_battery_update(battery, false); return acpi_print_funcs[fid](seq, result); } @@ -1030,7 +1034,7 @@ static void acpi_battery_notify(struct acpi_device *device, u32 event) old = battery->bat.dev; if (event == ACPI_BATTERY_NOTIFY_INFO) acpi_battery_refresh(battery); - acpi_battery_update(battery); + acpi_battery_update(battery, false); acpi_bus_generate_netlink_event(device->pnp.device_class, dev_name(&device->dev), event, acpi_battery_present(battery)); @@ -1045,13 +1049,27 @@ static int battery_notify(struct notifier_block *nb, { struct acpi_battery *battery = container_of(nb, struct acpi_battery, pm_nb); + int result; + switch (mode) { case PM_POST_HIBERNATION: case PM_POST_SUSPEND: - if (battery->bat.dev) { - sysfs_remove_battery(battery); - sysfs_add_battery(battery); - } + if (!acpi_battery_present(battery)) + return 0; + + if (!battery->bat.dev) { + result = acpi_battery_get_info(battery); + if (result) + return result; + + result = sysfs_add_battery(battery); + if (result) + return result; + } else + acpi_battery_refresh(battery); + + acpi_battery_init_alarm(battery); + acpi_battery_get_state(battery); break; } @@ -1087,7 +1105,7 @@ static int acpi_battery_add(struct acpi_device *device) mutex_init(&battery->sysfs_lock); if (acpi_has_method(battery->device->handle, "_BIX")) set_bit(ACPI_BATTERY_XINFO_PRESENT, &battery->flags); - result = acpi_battery_update(battery); + result = acpi_battery_update(battery, false); if (result) goto fail; #ifdef CONFIG_ACPI_PROCFS_POWER @@ -1149,7 +1167,7 @@ static int acpi_battery_resume(struct device *dev) return -EINVAL; battery->update_time = 0; - acpi_battery_update(battery); + acpi_battery_update(battery, true); return 0; } #else -- cgit v1.2.3 From 1ac5aaa67290b397712e4410de7f067d5cd85871 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Wed, 28 May 2014 15:23:36 +0800 Subject: ACPI / battery: introduce support for POWER_SUPPLY_PROP_CAPACITY_LEVEL ACPI battery device receives notifications when 1. the remaining battery capacity becomes critical low 2. the trip point set by the _BTP (Design capacity of Warning by default) is reached or crossed. So it is able to support POWER_SUPPLY_PROP_CAPACITY_LEVEL to report POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL, POWER_SUPPLY_CAPACITY_LEVEL_LOW, POWER_SUPPLY_CAPACITY_LEVEL_NORMAL, POWER_SUPPLY_CAPACITY_LEVEL_FULL, capacity levels to power supply core and user space. Introduce support for POWER_SUPPLY_PROP_CAPACITY_LEVEL in this patch. Signed-off-by: Zhang Rui Signed-off-by: Rafael J. Wysocki --- drivers/acpi/battery.c | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index 3b4921e4dc4e..11285e7df278 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -56,6 +56,10 @@ /* Battery power unit: 0 means mW, 1 means mA */ #define ACPI_BATTERY_POWER_UNIT_MA 1 +#define ACPI_BATTERY_STATE_DISCHARGING 0x1 +#define ACPI_BATTERY_STATE_CHARGING 0x2 +#define ACPI_BATTERY_STATE_CRITICAL 0x4 + #define _COMPONENT ACPI_BATTERY_COMPONENT ACPI_MODULE_NAME("battery"); @@ -169,7 +173,7 @@ static int acpi_battery_get_state(struct acpi_battery *battery); static int acpi_battery_is_charged(struct acpi_battery *battery) { - /* either charging or discharging */ + /* charging, discharging or critical low */ if (battery->state != 0) return 0; @@ -204,9 +208,9 @@ static int acpi_battery_get_property(struct power_supply *psy, return -ENODEV; switch (psp) { case POWER_SUPPLY_PROP_STATUS: - if (battery->state & 0x01) + if (battery->state & ACPI_BATTERY_STATE_DISCHARGING) val->intval = POWER_SUPPLY_STATUS_DISCHARGING; - else if (battery->state & 0x02) + else if (battery->state & ACPI_BATTERY_STATE_CHARGING) val->intval = POWER_SUPPLY_STATUS_CHARGING; else if (acpi_battery_is_charged(battery)) val->intval = POWER_SUPPLY_STATUS_FULL; @@ -269,6 +273,17 @@ static int acpi_battery_get_property(struct power_supply *psy, else val->intval = 0; break; + case POWER_SUPPLY_PROP_CAPACITY_LEVEL: + if (battery->state & ACPI_BATTERY_STATE_CRITICAL) + val->intval = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL; + else if (test_bit(ACPI_BATTERY_ALARM_PRESENT, &battery->flags) && + (battery->capacity_now <= battery->alarm)) + val->intval = POWER_SUPPLY_CAPACITY_LEVEL_LOW; + else if (acpi_battery_is_charged(battery)) + val->intval = POWER_SUPPLY_CAPACITY_LEVEL_FULL; + else + val->intval = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL; + break; case POWER_SUPPLY_PROP_MODEL_NAME: val->strval = battery->model_number; break; @@ -296,6 +311,7 @@ static enum power_supply_property charge_battery_props[] = { POWER_SUPPLY_PROP_CHARGE_FULL, POWER_SUPPLY_PROP_CHARGE_NOW, POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_CAPACITY_LEVEL, POWER_SUPPLY_PROP_MODEL_NAME, POWER_SUPPLY_PROP_MANUFACTURER, POWER_SUPPLY_PROP_SERIAL_NUMBER, @@ -313,6 +329,7 @@ static enum power_supply_property energy_battery_props[] = { POWER_SUPPLY_PROP_ENERGY_FULL, POWER_SUPPLY_PROP_ENERGY_NOW, POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_CAPACITY_LEVEL, POWER_SUPPLY_PROP_MODEL_NAME, POWER_SUPPLY_PROP_MANUFACTURER, POWER_SUPPLY_PROP_SERIAL_NUMBER, -- cgit v1.2.3 From 9113e260767b1cb44f8da0e5922e1a9a5417c4b8 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Wed, 28 May 2014 15:23:37 +0800 Subject: power_supply: allow power supply devices registered w/o wakeup source Currently, all the power supply devices are registered with wakeup source, this results in that every power_supply_changed() invocation brings the system out of suspend-to-freeze state. This is overkill as some device drivers, e.g. ACPI battery driver, have the ability to check the device status and wake up the system from sleeping only when necessary. Thus introduce a new API which allows device to be registered w/o wakeup source. Signed-off-by: Zhang Rui Signed-off-by: Rafael J. Wysocki --- drivers/power/power_supply_core.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/power/power_supply_core.c b/drivers/power/power_supply_core.c index 26606641fe44..5a5a24e7d43c 100644 --- a/drivers/power/power_supply_core.c +++ b/drivers/power/power_supply_core.c @@ -537,7 +537,7 @@ static void psy_unregister_cooler(struct power_supply *psy) } #endif -int power_supply_register(struct device *parent, struct power_supply *psy) +int __power_supply_register(struct device *parent, struct power_supply *psy, bool ws) { struct device *dev; int rc; @@ -568,7 +568,7 @@ int power_supply_register(struct device *parent, struct power_supply *psy) } spin_lock_init(&psy->changed_lock); - rc = device_init_wakeup(dev, true); + rc = device_init_wakeup(dev, ws); if (rc) goto wakeup_init_failed; @@ -606,8 +606,19 @@ dev_set_name_failed: success: return rc; } + +int power_supply_register(struct device *parent, struct power_supply *psy) +{ + return __power_supply_register(parent, psy, true); +} EXPORT_SYMBOL_GPL(power_supply_register); +int power_supply_register_no_ws(struct device *parent, struct power_supply *psy) +{ + return __power_supply_register(parent, psy, false); +} +EXPORT_SYMBOL_GPL(power_supply_register_no_ws); + void power_supply_unregister(struct power_supply *psy) { cancel_work_sync(&psy->changed_work); -- cgit v1.2.3 From e0d1f09e311fafa33b4bfd942c852671ce25ae58 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Wed, 28 May 2014 15:23:38 +0800 Subject: ACPI / battery: wakeup the system only when necessary ACPI Battery device receives notifications from firmware frequently, and most of these notifications are some general events, like battery remaining capacity change, etc, which should not wake the system up if the system is in suspend/hibernate state. This causes a problem that the system wakes up from suspend to freeze shortly, because there is an ACPI battery notification every 10 seconds. Fix the problem in this patch by registering ACPI battery device' own wakeup source, and waking up the system only when the battery remaining capacity is critical low, or lower than the alarm capacity set via _BTP. Link: https://bugzilla.kernel.org/show_bug.cgi?id=76221 Signed-off-by: Zhang Rui Signed-off-by: Rafael J. Wysocki --- drivers/acpi/battery.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index 11285e7df278..e48fc98e71c4 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -622,7 +622,8 @@ static int sysfs_add_battery(struct acpi_battery *battery) battery->bat.type = POWER_SUPPLY_TYPE_BATTERY; battery->bat.get_property = acpi_battery_get_property; - result = power_supply_register(&battery->device->dev, &battery->bat); + result = power_supply_register_no_ws(&battery->device->dev, &battery->bat); + if (result) return result; return device_create_file(battery->bat.dev, &alarm_attr); @@ -741,7 +742,19 @@ static int acpi_battery_update(struct acpi_battery *battery, bool resume) return result; } result = acpi_battery_get_state(battery); + if (result) + return result; acpi_battery_quirks(battery); + + /* + * Wakeup the system if battery is critical low + * or lower than the alarm level + */ + if ((battery->state & ACPI_BATTERY_STATE_CRITICAL) || + (test_bit(ACPI_BATTERY_ALARM_PRESENT, &battery->flags) && + (battery->capacity_now <= battery->alarm))) + pm_wakeup_event(&battery->device->dev, 0); + return result; } @@ -1142,6 +1155,8 @@ static int acpi_battery_add(struct acpi_device *device) battery->pm_nb.notifier_call = battery_notify; register_pm_notifier(&battery->pm_nb); + device_init_wakeup(&device->dev, 1); + return result; fail: @@ -1158,6 +1173,7 @@ static int acpi_battery_remove(struct acpi_device *device) if (!device || !acpi_driver_data(device)) return -EINVAL; + device_init_wakeup(&device->dev, 0); battery = acpi_driver_data(device); unregister_pm_notifier(&battery->pm_nb); #ifdef CONFIG_ACPI_PROCFS_POWER -- cgit v1.2.3