From ef67f18dece707eb2fb1ef25ccca47062842dc4a Mon Sep 17 00:00:00 2001 From: Alexander Bondar Date: Sun, 30 Mar 2014 10:47:08 +0300 Subject: iwlwifi: mvm: several fixes in scan The firmware doesn't handle properly the fragmented scan. Stop using it. While at it change max_out_time and suspend_time units from usec to TUs as expected by firmware API. Signed-off-by: Alexander Bondar Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h | 8 ++-- drivers/net/wireless/iwlwifi/mvm/scan.c | 53 ++++++-------------------- 2 files changed, 16 insertions(+), 45 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h index 9426905de6b2..d73a89ecd78a 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h @@ -183,9 +183,9 @@ enum iwl_scan_type { * this number of packets were received (typically 1) * @passive2active: is auto switching from passive to active during scan allowed * @rxchain_sel_flags: RXON_RX_CHAIN_* - * @max_out_time: in usecs, max out of serving channel time + * @max_out_time: in TUs, max out of serving channel time * @suspend_time: how long to pause scan when returning to service channel: - * bits 0-19: beacon interal in usecs (suspend before executing) + * bits 0-19: beacon interal in TUs (suspend before executing) * bits 20-23: reserved * bits 24-31: number of beacons (suspend between channels) * @rxon_flags: RXON_FLG_* @@ -383,8 +383,8 @@ enum scan_framework_client { * @quiet_plcp_th: quiet channel num of packets threshold * @good_CRC_th: passive to active promotion threshold * @rx_chain: RXON rx chain. - * @max_out_time: max uSec to be out of assoceated channel - * @suspend_time: pause scan this long when returning to service channel + * @max_out_time: max TUs to be out of assoceated channel + * @suspend_time: pause scan this TUs when returning to service channel * @flags: RXON flags * @filter_flags: RXONfilter * @tx_cmd: tx command for active scan; for 2GHz and for 5GHz. diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c index c91dc8498852..cba88a379fc8 100644 --- a/drivers/net/wireless/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/iwlwifi/mvm/scan.c @@ -277,51 +277,22 @@ static void iwl_mvm_scan_calc_params(struct iwl_mvm *mvm, IEEE80211_IFACE_ITER_NORMAL, iwl_mvm_scan_condition_iterator, &global_bound); - /* - * Under low latency traffic passive scan is fragmented meaning - * that dwell on a particular channel will be fragmented. Each fragment - * dwell time is 20ms and fragments period is 105ms. Skipping to next - * channel will be delayed by the same period - 105ms. So suspend_time - * parameter describing both fragments and channels skipping periods is - * set to 105ms. This value is chosen so that overall passive scan - * duration will not be too long. Max_out_time in this case is set to - * 70ms, so for active scanning operating channel will be left for 70ms - * while for passive still for 20ms (fragment dwell). - */ - if (global_bound) { - if (!iwl_mvm_low_latency(mvm)) { - params->suspend_time = ieee80211_tu_to_usec(100); - params->max_out_time = ieee80211_tu_to_usec(600); - } else { - params->suspend_time = ieee80211_tu_to_usec(105); - /* P2P doesn't support fragmented passive scan, so - * configure max_out_time to be at least longest dwell - * time for passive scan. - */ - if (vif->type == NL80211_IFTYPE_STATION && !vif->p2p) { - params->max_out_time = ieee80211_tu_to_usec(70); - params->passive_fragmented = true; - } else { - u32 passive_dwell; - /* - * Use band G so that passive channel dwell time - * will be assigned with maximum value. - */ - band = IEEE80211_BAND_2GHZ; - passive_dwell = iwl_mvm_get_passive_dwell(band); - params->max_out_time = - ieee80211_tu_to_usec(passive_dwell); - } - } + if (!global_bound) + goto not_bound; + + params->suspend_time = 100; + params->max_out_time = 600; + + if (iwl_mvm_low_latency(mvm)) { + params->suspend_time = 250; + params->max_out_time = 250; } +not_bound: + for (band = IEEE80211_BAND_2GHZ; band < IEEE80211_NUM_BANDS; band++) { - if (params->passive_fragmented) - params->dwell[band].passive = 20; - else - params->dwell[band].passive = - iwl_mvm_get_passive_dwell(band); + params->dwell[band].passive = iwl_mvm_get_passive_dwell(band); params->dwell[band].active = iwl_mvm_get_active_dwell(band, n_ssids); } -- cgit v1.2.3 From 0fed2bcf17d2a049c079ffd2b7bc4caca4b7f906 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sun, 13 Apr 2014 22:55:27 +0300 Subject: iwlwifi: mvm: BT Coex - fix validity flags during init The commit below introduced a bug in the validity bits in init. Due to that, all the Coex mechanism stopped sending kills to the BT side. Fix that. Fixes: b9fae2d54c9f ("iwlwifi: mvm: BT Coex add support for Co-running block") Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/coex.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/mvm/coex.c b/drivers/net/wireless/iwlwifi/mvm/coex.c index fa858d548d13..0489314425cb 100644 --- a/drivers/net/wireless/iwlwifi/mvm/coex.c +++ b/drivers/net/wireless/iwlwifi/mvm/coex.c @@ -611,14 +611,14 @@ int iwl_send_bt_init_conf(struct iwl_mvm *mvm) bt_cmd->flags |= cpu_to_le32(BT_COEX_SYNC2SCO); if (IWL_MVM_BT_COEX_CORUNNING) { - bt_cmd->valid_bit_msk = cpu_to_le32(BT_VALID_CORUN_LUT_20 | - BT_VALID_CORUN_LUT_40); + bt_cmd->valid_bit_msk |= cpu_to_le32(BT_VALID_CORUN_LUT_20 | + BT_VALID_CORUN_LUT_40); bt_cmd->flags |= cpu_to_le32(BT_COEX_CORUNNING); } if (IWL_MVM_BT_COEX_MPLUT) { bt_cmd->flags |= cpu_to_le32(BT_COEX_MPLUT); - bt_cmd->valid_bit_msk = cpu_to_le32(BT_VALID_MULTI_PRIO_LUT); + bt_cmd->valid_bit_msk |= cpu_to_le32(BT_VALID_MULTI_PRIO_LUT); } if (mvm->cfg->bt_shared_single_ant) -- cgit v1.2.3 From 8e96440e8d42da0dab02cae125ea59e2b64c77fe Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Tue, 6 May 2014 20:35:10 +0300 Subject: iwlwifi: mvm: rs - s/CPTCFG/CONFIG My bad - I forgot to update this when sending the patch upstream. Fixes: 87d5e4155c00 ("iwlwifi: mvm: rs: reinit rs if no tx for a long time") Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/rs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c index 9f52c5b3f0ec..e1c838899363 100644 --- a/drivers/net/wireless/iwlwifi/mvm/rs.c +++ b/drivers/net/wireless/iwlwifi/mvm/rs.c @@ -1010,7 +1010,7 @@ static void rs_tx_status(void *mvm_r, struct ieee80211_supported_band *sband, return; } -#ifdef CPTCFG_MAC80211_DEBUGFS +#ifdef CONFIG_MAC80211_DEBUGFS /* Disable last tx check if we are debugging with fixed rate */ if (lq_sta->dbg_fixed_rate) { IWL_DEBUG_RATE(mvm, "Fixed rate. avoid rate scaling\n"); -- cgit v1.2.3 From bd5e4744a6ca64299b57a2682c720d00a475a734 Mon Sep 17 00:00:00 2001 From: David Spinadel Date: Thu, 24 Apr 2014 13:15:29 +0300 Subject: iwlwifi: mvm: do no sched scan while associated Currently the FW doesn't support sched scan while associated, Prevent it. Signed-off-by: David Spinadel Reviewed-by: Johannes Berg Reviewed-by: Luciano Coelho Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/mac80211.c | 5 +++++ drivers/net/wireless/iwlwifi/mvm/mvm.h | 3 +++ drivers/net/wireless/iwlwifi/mvm/utils.c | 19 +++++++++++++++++++ 3 files changed, 27 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index f0cebf12c7b8..593f723a74c4 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -1807,6 +1807,11 @@ static int iwl_mvm_mac_sched_scan_start(struct ieee80211_hw *hw, mutex_lock(&mvm->mutex); + if (iwl_mvm_is_associated(mvm)) { + ret = -EBUSY; + goto out; + } + switch (mvm->scan_status) { case IWL_MVM_SCAN_OS: IWL_DEBUG_SCAN(mvm, "Stopping previous scan for sched_scan\n"); diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h index d564233a65da..84c75a1b267e 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h @@ -1003,6 +1003,9 @@ static inline bool iwl_mvm_vif_low_latency(struct iwl_mvm_vif *mvmvif) return mvmvif->low_latency; } +/* Assoc status */ +bool iwl_mvm_is_associated(struct iwl_mvm *mvm); + /* Thermal management and CT-kill */ void iwl_mvm_tt_tx_backoff(struct iwl_mvm *mvm, u32 backoff); void iwl_mvm_tt_handler(struct iwl_mvm *mvm); diff --git a/drivers/net/wireless/iwlwifi/mvm/utils.c b/drivers/net/wireless/iwlwifi/mvm/utils.c index d619851745a1..6fdbef9696d8 100644 --- a/drivers/net/wireless/iwlwifi/mvm/utils.c +++ b/drivers/net/wireless/iwlwifi/mvm/utils.c @@ -644,3 +644,22 @@ bool iwl_mvm_low_latency(struct iwl_mvm *mvm) return result; } + +static void iwl_mvm_assoc_iter(void *_data, u8 *mac, struct ieee80211_vif *vif) +{ + bool *assoc = _data; + + if (vif->bss_conf.assoc) + *assoc = true; +} + +bool iwl_mvm_is_associated(struct iwl_mvm *mvm) +{ + bool assoc = false; + + ieee80211_iterate_active_interfaces_atomic( + mvm->hw, IEEE80211_IFACE_ITER_NORMAL, + iwl_mvm_assoc_iter, &assoc); + + return assoc; +} -- cgit v1.2.3 From 4f4178f3bb1f470d7fb863ec531e08e20a0fd51c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Sat, 3 May 2014 16:12:47 +0200 Subject: net: cdc_mbim: __vlan_find_dev_deep need rcu_read_lock MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixes this warning introduced by commit 5b8f15f78e6f ("net: cdc_mbim: handle IPv6 Neigbor Solicitations"): =============================== [ INFO: suspicious RCU usage. ] 3.15.0-rc3 #213 Tainted: G W O ------------------------------- net/8021q/vlan_core.c:69 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 1 no locks held by ksoftirqd/0/3. stack backtrace: CPU: 0 PID: 3 Comm: ksoftirqd/0 Tainted: G W O 3.15.0-rc3 #213 Hardware name: LENOVO 2776LEG/2776LEG, BIOS 6EET55WW (3.15 ) 12/19/2011 0000000000000001 ffff880232533bf0 ffffffff813a5ee6 0000000000000006 ffff880232530090 ffff880232533c20 ffffffff81076b94 0000000000000081 0000000000000000 ffff8802085ac000 ffff88007fc8ea00 ffff880232533c50 Call Trace: [] dump_stack+0x4e/0x68 [] lockdep_rcu_suspicious+0xfa/0x103 [] __vlan_find_dev_deep+0x54/0x94 [] cdc_mbim_rx_fixup+0x379/0x66a [cdc_mbim] [] ? _raw_spin_unlock_irqrestore+0x3a/0x49 [] ? trace_hardirqs_on_caller+0x192/0x1a1 [] usbnet_bh+0x59/0x287 [usbnet] [] tasklet_action+0xbb/0xcd [] __do_softirq+0x14c/0x30d [] run_ksoftirqd+0x1f/0x50 [] smpboot_thread_fn+0x172/0x18e [] ? SyS_setgroups+0xdf/0xdf [] kthread+0xb5/0xbd [] ? __wait_for_common+0x13b/0x170 [] ? __kthread_parkme+0x5c/0x5c [] ret_from_fork+0x7c/0xb0 [] ? __kthread_parkme+0x5c/0x5c Fixes: 5b8f15f78e6f ("net: cdc_mbim: handle IPv6 Neigbor Solicitations") Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/cdc_mbim.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/cdc_mbim.c b/drivers/net/usb/cdc_mbim.c index c9f3281506af..13f7705fd679 100644 --- a/drivers/net/usb/cdc_mbim.c +++ b/drivers/net/usb/cdc_mbim.c @@ -204,17 +204,23 @@ static void do_neigh_solicit(struct usbnet *dev, u8 *buf, u16 tci) return; /* need to send the NA on the VLAN dev, if any */ - if (tci) + rcu_read_lock(); + if (tci) { netdev = __vlan_find_dev_deep(dev->net, htons(ETH_P_8021Q), tci); - else + if (!netdev) { + rcu_read_unlock(); + return; + } + } else { netdev = dev->net; - if (!netdev) - return; + } + dev_hold(netdev); + rcu_read_unlock(); in6_dev = in6_dev_get(netdev); if (!in6_dev) - return; + goto out; is_router = !!in6_dev->cnf.forwarding; in6_dev_put(in6_dev); @@ -224,6 +230,8 @@ static void do_neigh_solicit(struct usbnet *dev, u8 *buf, u16 tci) true /* solicited */, false /* override */, true /* inc_opt */); +out: + dev_put(netdev); } static bool is_neigh_solicit(u8 *buf, size_t len) -- cgit v1.2.3 From 76a691d0ab71a244f7582a5b0387728befbdb52f Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Mon, 5 May 2014 14:51:47 -0400 Subject: jme: Fix DMA unmap warning The jme driver forgot to check the return status from pci_map_page in its tx path, causing a dma api warning on unmap. Easy fix, just do the check and augment the tx path to tell the stack that the driver is busy so we re-queue the frame. Signed-off-by: Neil Horman CC: Guo-Fu Tseng CC: "David S. Miller" Signed-off-by: David S. Miller --- drivers/net/ethernet/jme.c | 53 ++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 47 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/jme.c b/drivers/net/ethernet/jme.c index b0c6050479eb..6e664d9038d6 100644 --- a/drivers/net/ethernet/jme.c +++ b/drivers/net/ethernet/jme.c @@ -1988,7 +1988,7 @@ jme_alloc_txdesc(struct jme_adapter *jme, return idx; } -static void +static int jme_fill_tx_map(struct pci_dev *pdev, struct txdesc *txdesc, struct jme_buffer_info *txbi, @@ -2005,6 +2005,9 @@ jme_fill_tx_map(struct pci_dev *pdev, len, PCI_DMA_TODEVICE); + if (unlikely(pci_dma_mapping_error(pdev, dmaaddr))) + return -EINVAL; + pci_dma_sync_single_for_device(pdev, dmaaddr, len, @@ -2021,9 +2024,30 @@ jme_fill_tx_map(struct pci_dev *pdev, txbi->mapping = dmaaddr; txbi->len = len; + return 0; } -static void +static void jme_drop_tx_map(struct jme_adapter *jme, int startidx, int endidx) +{ + struct jme_ring *txring = &(jme->txring[0]); + struct jme_buffer_info *txbi = txring->bufinf, *ctxbi; + int mask = jme->tx_ring_mask; + int j; + + for (j = startidx ; j < endidx ; ++j) { + ctxbi = txbi + ((startidx + j + 2) & (mask)); + pci_unmap_page(jme->pdev, + ctxbi->mapping, + ctxbi->len, + PCI_DMA_TODEVICE); + + ctxbi->mapping = 0; + ctxbi->len = 0; + } + +} + +static int jme_map_tx_skb(struct jme_adapter *jme, struct sk_buff *skb, int idx) { struct jme_ring *txring = &(jme->txring[0]); @@ -2034,25 +2058,37 @@ jme_map_tx_skb(struct jme_adapter *jme, struct sk_buff *skb, int idx) int mask = jme->tx_ring_mask; const struct skb_frag_struct *frag; u32 len; + int ret = 0; for (i = 0 ; i < nr_frags ; ++i) { frag = &skb_shinfo(skb)->frags[i]; ctxdesc = txdesc + ((idx + i + 2) & (mask)); ctxbi = txbi + ((idx + i + 2) & (mask)); - jme_fill_tx_map(jme->pdev, ctxdesc, ctxbi, + ret = jme_fill_tx_map(jme->pdev, ctxdesc, ctxbi, skb_frag_page(frag), frag->page_offset, skb_frag_size(frag), hidma); + if (ret) { + jme_drop_tx_map(jme, idx, idx+i); + goto out; + } + } len = skb_is_nonlinear(skb) ? skb_headlen(skb) : skb->len; ctxdesc = txdesc + ((idx + 1) & (mask)); ctxbi = txbi + ((idx + 1) & (mask)); - jme_fill_tx_map(jme->pdev, ctxdesc, ctxbi, virt_to_page(skb->data), + ret = jme_fill_tx_map(jme->pdev, ctxdesc, ctxbi, virt_to_page(skb->data), offset_in_page(skb->data), len, hidma); + if (ret) + jme_drop_tx_map(jme, idx, idx+i); + +out: + return ret; } + static int jme_tx_tso(struct sk_buff *skb, __le16 *mss, u8 *flags) { @@ -2131,6 +2167,7 @@ jme_fill_tx_desc(struct jme_adapter *jme, struct sk_buff *skb, int idx) struct txdesc *txdesc; struct jme_buffer_info *txbi; u8 flags; + int ret = 0; txdesc = (struct txdesc *)txring->desc + idx; txbi = txring->bufinf + idx; @@ -2155,7 +2192,10 @@ jme_fill_tx_desc(struct jme_adapter *jme, struct sk_buff *skb, int idx) if (jme_tx_tso(skb, &txdesc->desc1.mss, &flags)) jme_tx_csum(jme, skb, &flags); jme_tx_vlan(skb, &txdesc->desc1.vlan, &flags); - jme_map_tx_skb(jme, skb, idx); + ret = jme_map_tx_skb(jme, skb, idx); + if (ret) + return ret; + txdesc->desc1.flags = flags; /* * Set tx buffer info after telling NIC to send @@ -2228,7 +2268,8 @@ jme_start_xmit(struct sk_buff *skb, struct net_device *netdev) return NETDEV_TX_BUSY; } - jme_fill_tx_desc(jme, skb, idx); + if (jme_fill_tx_desc(jme, skb, idx)) + return NETDEV_TX_BUSY; jwrite32(jme, JME_TXCS, jme->reg_txcs | TXCS_SELECT_QUEUE0 | -- cgit v1.2.3 From 83f7a85f1134c6e914453f5747435415a23d516b Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sun, 13 Apr 2014 16:03:11 +0300 Subject: iwlwifi: pcie: disable interrupts upon PCIe alloc In case RFKILL is in KILL position, the NIC will issue an interrupt straight away. This interrupt won't be sent because it is masked in the hardware. But if our interrupt service routine is called for another reason (SHARED_IRQ), then we'll look at the interrupt cause and service it. This can cause bad things if we are not ready yet. Explicitly clean the interrupt cause register to make sure we won't service anything before we are ready to. Cc: [3.14] Reported-and-tested-by: Alexander Monakov Reviewed-by: Johannes Berg Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/pcie/trans.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index dcfd6d866d09..2365553f1ef7 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -1749,6 +1749,10 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev, * PCI Tx retries from interfering with C3 CPU state */ pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00); + trans->dev = &pdev->dev; + trans_pcie->pci_dev = pdev; + iwl_disable_interrupts(trans); + err = pci_enable_msi(pdev); if (err) { dev_err(&pdev->dev, "pci_enable_msi failed(0X%x)\n", err); @@ -1760,8 +1764,6 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev, } } - trans->dev = &pdev->dev; - trans_pcie->pci_dev = pdev; trans->hw_rev = iwl_read32(trans, CSR_HW_REV); trans->hw_id = (pdev->device << 16) + pdev->subsystem_device; snprintf(trans->hw_id_str, sizeof(trans->hw_id_str), @@ -1787,8 +1789,6 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev, goto out_pci_disable_msi; } - trans_pcie->inta_mask = CSR_INI_SET_MASK; - if (iwl_pcie_alloc_ict(trans)) goto out_free_cmd_pool; @@ -1800,6 +1800,8 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev, goto out_free_ict; } + trans_pcie->inta_mask = CSR_INI_SET_MASK; + return trans; out_free_ict: -- cgit v1.2.3 From d5d2bf3eabb34cc8eaf54db37fdc43f04267985a Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Tue, 6 May 2014 03:46:48 -0400 Subject: qlcnic: Fix panic while dumping TX queues on TX timeout o In case of non-multi TX queue mode driver does not initialize "crb_intr_mask" pointer and driver was accessing that un-initialized pointer while dumping TX queue. So dump "crb_intr_mask" only when it is initilaized. Signed-off-by: Manish Chopra Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 0bc914859e38..be789513774c 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -2943,9 +2943,13 @@ static void qlcnic_dump_tx_rings(struct qlcnic_adapter *adapter) tx_ring->tx_stats.xmit_called, tx_ring->tx_stats.xmit_on, tx_ring->tx_stats.xmit_off); + + if (tx_ring->crb_intr_mask) + netdev_info(netdev, "crb_intr_mask=%d\n", + readl(tx_ring->crb_intr_mask)); + netdev_info(netdev, - "crb_intr_mask=%d, hw_producer=%d, sw_producer=%d sw_consumer=%d, hw_consumer=%d\n", - readl(tx_ring->crb_intr_mask), + "hw_producer=%d, sw_producer=%d sw_consumer=%d, hw_consumer=%d\n", readl(tx_ring->crb_cmd_producer), tx_ring->producer, tx_ring->sw_consumer, le32_to_cpu(*(tx_ring->hw_consumer))); -- cgit v1.2.3 From 84d7ad2c3b8a80888d9a483388ccbd5e5f07438f Mon Sep 17 00:00:00 2001 From: Shahed Shaikh Date: Tue, 6 May 2014 03:46:49 -0400 Subject: qlcnic: Set real_num_{tx|rx}_queues properly Do not set netdev->real_num_tx_queues directly, let netif_set_real_num_tx_queues() take care of it. Do not overwrite netdev->num_tx_queues everytime when driver changes its Tx ring size through ethtool -L and also notify stack to update number of Rx queues. Signed-off-by: Shahed Shaikh Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic.h | 16 -------- drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 49 +++++++++++++++++++++++- 2 files changed, 47 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index 7b52a88923ef..f785d01c7d12 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -1719,22 +1719,6 @@ static inline u32 qlcnic_tx_avail(struct qlcnic_host_tx_ring *tx_ring) tx_ring->producer; } -static inline int qlcnic_set_real_num_queues(struct qlcnic_adapter *adapter, - struct net_device *netdev) -{ - int err; - - netdev->num_tx_queues = adapter->drv_tx_rings; - netdev->real_num_tx_queues = adapter->drv_tx_rings; - - err = netif_set_real_num_tx_queues(netdev, adapter->drv_tx_rings); - if (err) - netdev_err(netdev, "failed to set %d Tx queues\n", - adapter->drv_tx_rings); - - return err; -} - struct qlcnic_nic_template { int (*config_bridged_mode) (struct qlcnic_adapter *, u32); int (*config_led) (struct qlcnic_adapter *, u32, u32); diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index be789513774c..7e55e88a81bf 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -2206,6 +2206,31 @@ static void qlcnic_82xx_set_mac_filter_count(struct qlcnic_adapter *adapter) ahw->max_uc_count = count; } +static int qlcnic_set_real_num_queues(struct qlcnic_adapter *adapter, + u8 tx_queues, u8 rx_queues) +{ + struct net_device *netdev = adapter->netdev; + int err = 0; + + if (tx_queues) { + err = netif_set_real_num_tx_queues(netdev, tx_queues); + if (err) { + netdev_err(netdev, "failed to set %d Tx queues\n", + tx_queues); + return err; + } + } + + if (rx_queues) { + err = netif_set_real_num_rx_queues(netdev, rx_queues); + if (err) + netdev_err(netdev, "failed to set %d Rx queues\n", + rx_queues); + } + + return err; +} + int qlcnic_setup_netdev(struct qlcnic_adapter *adapter, struct net_device *netdev, int pci_using_dac) @@ -2269,7 +2294,8 @@ qlcnic_setup_netdev(struct qlcnic_adapter *adapter, struct net_device *netdev, netdev->priv_flags |= IFF_UNICAST_FLT; netdev->irq = adapter->msix_entries[0].vector; - err = qlcnic_set_real_num_queues(adapter, netdev); + err = qlcnic_set_real_num_queues(adapter, adapter->drv_tx_rings, + adapter->drv_sds_rings); if (err) return err; @@ -3982,12 +4008,21 @@ int qlcnic_validate_rings(struct qlcnic_adapter *adapter, __u32 ring_cnt, int qlcnic_setup_rings(struct qlcnic_adapter *adapter) { struct net_device *netdev = adapter->netdev; + u8 tx_rings, rx_rings; int err; if (test_bit(__QLCNIC_RESETTING, &adapter->state)) return -EBUSY; + tx_rings = adapter->drv_tss_rings; + rx_rings = adapter->drv_rss_rings; + netif_device_detach(netdev); + + err = qlcnic_set_real_num_queues(adapter, tx_rings, rx_rings); + if (err) + goto done; + if (netif_running(netdev)) __qlcnic_down(adapter, netdev); @@ -4007,7 +4042,17 @@ int qlcnic_setup_rings(struct qlcnic_adapter *adapter) return err; } - netif_set_real_num_tx_queues(netdev, adapter->drv_tx_rings); + /* Check if we need to update real_num_{tx|rx}_queues because + * qlcnic_setup_intr() may change Tx/Rx rings size + */ + if ((tx_rings != adapter->drv_tx_rings) || + (rx_rings != adapter->drv_sds_rings)) { + err = qlcnic_set_real_num_queues(adapter, + adapter->drv_tx_rings, + adapter->drv_sds_rings); + if (err) + goto done; + } if (qlcnic_83xx_check(adapter)) { qlcnic_83xx_initialize_nic(adapter, 1); -- cgit v1.2.3 From 6af55ff52b02d492d45db88df3e461fa51a6f753 Mon Sep 17 00:00:00 2001 From: Darek Marcinkiewicz Date: Tue, 6 May 2014 22:24:50 +0200 Subject: Driver for Beckhoff CX5020 EtherCAT master module. This driver adds support for EtherCAT master module located on CCAT FPGA found on Beckhoff CX series industrial PCs. The driver exposes EtherCAT master as an ethernet interface. EtherCAT is a fieldbus protocol defined on top of ethernet and Beckhoff CX5020 PCs come with built-in EtherCAT master module located on a FPGA, which in turn is connected to a PCI bus. Signed-off-by: Dariusz Marcinkiewicz Signed-off-by: David S. Miller --- drivers/net/ethernet/Kconfig | 12 + drivers/net/ethernet/Makefile | 1 + drivers/net/ethernet/ec_bhf.c | 706 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 719 insertions(+) create mode 100644 drivers/net/ethernet/ec_bhf.c (limited to 'drivers') diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig index 39b26fe28d10..d7401017a3f1 100644 --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig @@ -35,6 +35,18 @@ source "drivers/net/ethernet/calxeda/Kconfig" source "drivers/net/ethernet/chelsio/Kconfig" source "drivers/net/ethernet/cirrus/Kconfig" source "drivers/net/ethernet/cisco/Kconfig" + +config CX_ECAT + tristate "Beckhoff CX5020 EtherCAT master support" + depends on PCI + ---help--- + Driver for EtherCAT master module located on CCAT FPGA + that can be found on Beckhoff CX5020, and possibly other of CX + Beckhoff CX series industrial PCs. + + To compile this driver as a module, choose M here. The module + will be called ec_bhf. + source "drivers/net/ethernet/davicom/Kconfig" config DNET diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile index 545d0b3b9cb4..35190e36c456 100644 --- a/drivers/net/ethernet/Makefile +++ b/drivers/net/ethernet/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_NET_CALXEDA_XGMAC) += calxeda/ obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/ obj-$(CONFIG_NET_VENDOR_CIRRUS) += cirrus/ obj-$(CONFIG_NET_VENDOR_CISCO) += cisco/ +obj-$(CONFIG_CX_ECAT) += ec_bhf.o obj-$(CONFIG_DM9000) += davicom/ obj-$(CONFIG_DNET) += dnet.o obj-$(CONFIG_NET_VENDOR_DEC) += dec/ diff --git a/drivers/net/ethernet/ec_bhf.c b/drivers/net/ethernet/ec_bhf.c new file mode 100644 index 000000000000..4884205e56ee --- /dev/null +++ b/drivers/net/ethernet/ec_bhf.c @@ -0,0 +1,706 @@ + /* + * drivers/net/ethernet/beckhoff/ec_bhf.c + * + * Copyright (C) 2014 Darek Marcinkiewicz + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +/* This is a driver for EtherCAT master module present on CCAT FPGA. + * Those can be found on Bechhoff CX50xx industrial PCs. + */ + +#if 0 +#define DEBUG +#endif +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#define TIMER_INTERVAL_NSEC 20000 + +#define INFO_BLOCK_SIZE 0x10 +#define INFO_BLOCK_TYPE 0x0 +#define INFO_BLOCK_REV 0x2 +#define INFO_BLOCK_BLK_CNT 0x4 +#define INFO_BLOCK_TX_CHAN 0x4 +#define INFO_BLOCK_RX_CHAN 0x5 +#define INFO_BLOCK_OFFSET 0x8 + +#define EC_MII_OFFSET 0x4 +#define EC_FIFO_OFFSET 0x8 +#define EC_MAC_OFFSET 0xc + +#define MAC_FRAME_ERR_CNT 0x0 +#define MAC_RX_ERR_CNT 0x1 +#define MAC_CRC_ERR_CNT 0x2 +#define MAC_LNK_LST_ERR_CNT 0x3 +#define MAC_TX_FRAME_CNT 0x10 +#define MAC_RX_FRAME_CNT 0x14 +#define MAC_TX_FIFO_LVL 0x20 +#define MAC_DROPPED_FRMS 0x28 +#define MAC_CONNECTED_CCAT_FLAG 0x78 + +#define MII_MAC_ADDR 0x8 +#define MII_MAC_FILT_FLAG 0xe +#define MII_LINK_STATUS 0xf + +#define FIFO_TX_REG 0x0 +#define FIFO_TX_RESET 0x8 +#define FIFO_RX_REG 0x10 +#define FIFO_RX_ADDR_VALID (1u << 31) +#define FIFO_RX_RESET 0x18 + +#define DMA_CHAN_OFFSET 0x1000 +#define DMA_CHAN_SIZE 0x8 + +#define DMA_WINDOW_SIZE_MASK 0xfffffffc + +static struct pci_device_id ids[] = { + { PCI_DEVICE(0x15ec, 0x5000), }, + { 0, } +}; +MODULE_DEVICE_TABLE(pci, ids); + +struct rx_header { +#define RXHDR_NEXT_ADDR_MASK 0xffffffu +#define RXHDR_NEXT_VALID (1u << 31) + __le32 next; +#define RXHDR_NEXT_RECV_FLAG 0x1 + __le32 recv; +#define RXHDR_LEN_MASK 0xfffu + __le16 len; + __le16 port; + __le32 reserved; + u8 timestamp[8]; +} __packed; + +#define PKT_PAYLOAD_SIZE 0x7e8 +struct rx_desc { + struct rx_header header; + u8 data[PKT_PAYLOAD_SIZE]; +} __packed; + +struct tx_header { + __le16 len; +#define TX_HDR_PORT_0 0x1 +#define TX_HDR_PORT_1 0x2 + u8 port; + u8 ts_enable; +#define TX_HDR_SENT 0x1 + __le32 sent; + u8 timestamp[8]; +} __packed; + +struct tx_desc { + struct tx_header header; + u8 data[PKT_PAYLOAD_SIZE]; +} __packed; + +#define FIFO_SIZE 64 + +static long polling_frequency = TIMER_INTERVAL_NSEC; + +struct bhf_dma { + u8 *buf; + size_t len; + dma_addr_t buf_phys; + + u8 *alloc; + size_t alloc_len; + dma_addr_t alloc_phys; +}; + +struct ec_bhf_priv { + struct net_device *net_dev; + + struct pci_dev *dev; + + void * __iomem io; + void * __iomem dma_io; + + struct hrtimer hrtimer; + + int tx_dma_chan; + int rx_dma_chan; + void * __iomem ec_io; + void * __iomem fifo_io; + void * __iomem mii_io; + void * __iomem mac_io; + + struct bhf_dma rx_buf; + struct rx_desc *rx_descs; + int rx_dnext; + int rx_dcount; + + struct bhf_dma tx_buf; + struct tx_desc *tx_descs; + int tx_dcount; + int tx_dnext; + + u64 stat_rx_bytes; + u64 stat_tx_bytes; +}; + +#define PRIV_TO_DEV(priv) (&(priv)->dev->dev) + +#define ETHERCAT_MASTER_ID 0x14 + +static void ec_bhf_print_status(struct ec_bhf_priv *priv) +{ + struct device *dev = PRIV_TO_DEV(priv); + + dev_dbg(dev, "Frame error counter: %d\n", + ioread8(priv->mac_io + MAC_FRAME_ERR_CNT)); + dev_dbg(dev, "RX error counter: %d\n", + ioread8(priv->mac_io + MAC_RX_ERR_CNT)); + dev_dbg(dev, "CRC error counter: %d\n", + ioread8(priv->mac_io + MAC_CRC_ERR_CNT)); + dev_dbg(dev, "TX frame counter: %d\n", + ioread32(priv->mac_io + MAC_TX_FRAME_CNT)); + dev_dbg(dev, "RX frame counter: %d\n", + ioread32(priv->mac_io + MAC_RX_FRAME_CNT)); + dev_dbg(dev, "TX fifo level: %d\n", + ioread8(priv->mac_io + MAC_TX_FIFO_LVL)); + dev_dbg(dev, "Dropped frames: %d\n", + ioread8(priv->mac_io + MAC_DROPPED_FRMS)); + dev_dbg(dev, "Connected with CCAT slot: %d\n", + ioread8(priv->mac_io + MAC_CONNECTED_CCAT_FLAG)); + dev_dbg(dev, "Link status: %d\n", + ioread8(priv->mii_io + MII_LINK_STATUS)); +} + +static void ec_bhf_reset(struct ec_bhf_priv *priv) +{ + iowrite8(0, priv->mac_io + MAC_FRAME_ERR_CNT); + iowrite8(0, priv->mac_io + MAC_RX_ERR_CNT); + iowrite8(0, priv->mac_io + MAC_CRC_ERR_CNT); + iowrite8(0, priv->mac_io + MAC_LNK_LST_ERR_CNT); + iowrite32(0, priv->mac_io + MAC_TX_FRAME_CNT); + iowrite32(0, priv->mac_io + MAC_RX_FRAME_CNT); + iowrite8(0, priv->mac_io + MAC_DROPPED_FRMS); + + iowrite8(0, priv->fifo_io + FIFO_TX_RESET); + iowrite8(0, priv->fifo_io + FIFO_RX_RESET); + + iowrite8(0, priv->mac_io + MAC_TX_FIFO_LVL); +} + +static void ec_bhf_send_packet(struct ec_bhf_priv *priv, struct tx_desc *desc) +{ + u32 len = le16_to_cpu(desc->header.len) + sizeof(desc->header); + u32 addr = (u8 *)desc - priv->tx_buf.buf; + + iowrite32((ALIGN(len, 8) << 24) | addr, priv->fifo_io + FIFO_TX_REG); + + dev_dbg(PRIV_TO_DEV(priv), "Done sending packet\n"); +} + +static int ec_bhf_desc_sent(struct tx_desc *desc) +{ + return le32_to_cpu(desc->header.sent) & TX_HDR_SENT; +} + +static void ec_bhf_process_tx(struct ec_bhf_priv *priv) +{ + if (unlikely(netif_queue_stopped(priv->net_dev))) { + /* Make sure that we perceive changes to tx_dnext. */ + smp_rmb(); + + if (ec_bhf_desc_sent(&priv->tx_descs[priv->tx_dnext])) + netif_wake_queue(priv->net_dev); + } +} + +static int ec_bhf_pkt_received(struct rx_desc *desc) +{ + return le32_to_cpu(desc->header.recv) & RXHDR_NEXT_RECV_FLAG; +} + +static void ec_bhf_add_rx_desc(struct ec_bhf_priv *priv, struct rx_desc *desc) +{ + iowrite32(FIFO_RX_ADDR_VALID | ((u8 *)(desc) - priv->rx_buf.buf), + priv->fifo_io + FIFO_RX_REG); +} + +static void ec_bhf_process_rx(struct ec_bhf_priv *priv) +{ + struct rx_desc *desc = &priv->rx_descs[priv->rx_dnext]; + struct device *dev = PRIV_TO_DEV(priv); + + while (ec_bhf_pkt_received(desc)) { + int pkt_size = (le16_to_cpu(desc->header.len) & + RXHDR_LEN_MASK) - sizeof(struct rx_header) - 4; + u8 *data = desc->data; + struct sk_buff *skb; + + skb = netdev_alloc_skb_ip_align(priv->net_dev, pkt_size); + dev_dbg(dev, "Received packet, size: %d\n", pkt_size); + + if (skb) { + memcpy(skb_put(skb, pkt_size), data, pkt_size); + skb->protocol = eth_type_trans(skb, priv->net_dev); + dev_dbg(dev, "Protocol type: %x\n", skb->protocol); + + priv->stat_rx_bytes += pkt_size; + + netif_rx(skb); + } else { + dev_err_ratelimited(dev, + "Couldn't allocate a skb_buff for a packet of size %u\n", + pkt_size); + } + + desc->header.recv = 0; + + ec_bhf_add_rx_desc(priv, desc); + + priv->rx_dnext = (priv->rx_dnext + 1) % priv->rx_dcount; + desc = &priv->rx_descs[priv->rx_dnext]; + } + +} + +static enum hrtimer_restart ec_bhf_timer_fun(struct hrtimer *timer) +{ + struct ec_bhf_priv *priv = container_of(timer, struct ec_bhf_priv, + hrtimer); + ec_bhf_process_rx(priv); + ec_bhf_process_tx(priv); + + if (!netif_running(priv->net_dev)) + return HRTIMER_NORESTART; + + hrtimer_forward_now(timer, ktime_set(0, polling_frequency)); + return HRTIMER_RESTART; +} + +static int ec_bhf_setup_offsets(struct ec_bhf_priv *priv) +{ + struct device *dev = PRIV_TO_DEV(priv); + unsigned block_count, i; + void * __iomem ec_info; + + dev_dbg(dev, "Info block:\n"); + dev_dbg(dev, "Type of function: %x\n", (unsigned)ioread16(priv->io)); + dev_dbg(dev, "Revision of function: %x\n", + (unsigned)ioread16(priv->io + INFO_BLOCK_REV)); + + block_count = ioread8(priv->io + INFO_BLOCK_BLK_CNT); + dev_dbg(dev, "Number of function blocks: %x\n", block_count); + + for (i = 0; i < block_count; i++) { + u16 type = ioread16(priv->io + i * INFO_BLOCK_SIZE + + INFO_BLOCK_TYPE); + if (type == ETHERCAT_MASTER_ID) + break; + } + if (i == block_count) { + dev_err(dev, "EtherCAT master with DMA block not found\n"); + return -ENODEV; + } + dev_dbg(dev, "EtherCAT master with DMA block found at pos: %d\n", i); + + ec_info = priv->io + i * INFO_BLOCK_SIZE; + dev_dbg(dev, "EtherCAT master revision: %d\n", + ioread16(ec_info + INFO_BLOCK_REV)); + + priv->tx_dma_chan = ioread8(ec_info + INFO_BLOCK_TX_CHAN); + dev_dbg(dev, "EtherCAT master tx dma channel: %d\n", + priv->tx_dma_chan); + + priv->rx_dma_chan = ioread8(ec_info + INFO_BLOCK_RX_CHAN); + dev_dbg(dev, "EtherCAT master rx dma channel: %d\n", + priv->rx_dma_chan); + + priv->ec_io = priv->io + ioread32(ec_info + INFO_BLOCK_OFFSET); + priv->mii_io = priv->ec_io + ioread32(priv->ec_io + EC_MII_OFFSET); + priv->fifo_io = priv->ec_io + ioread32(priv->ec_io + EC_FIFO_OFFSET); + priv->mac_io = priv->ec_io + ioread32(priv->ec_io + EC_MAC_OFFSET); + + dev_dbg(dev, + "EtherCAT block addres: %p, fifo address: %p, mii address: %p, mac address: %p\n", + priv->ec_io, priv->fifo_io, priv->mii_io, priv->mac_io); + + return 0; +} + +static netdev_tx_t ec_bhf_start_xmit(struct sk_buff *skb, + struct net_device *net_dev) +{ + struct ec_bhf_priv *priv = netdev_priv(net_dev); + struct tx_desc *desc; + unsigned len; + + dev_dbg(PRIV_TO_DEV(priv), "Starting xmit\n"); + + desc = &priv->tx_descs[priv->tx_dnext]; + + skb_copy_and_csum_dev(skb, desc->data); + len = skb->len; + + memset(&desc->header, 0, sizeof(desc->header)); + desc->header.len = cpu_to_le16(len); + desc->header.port = TX_HDR_PORT_0; + + ec_bhf_send_packet(priv, desc); + + priv->tx_dnext = (priv->tx_dnext + 1) % priv->tx_dcount; + + if (!ec_bhf_desc_sent(&priv->tx_descs[priv->tx_dnext])) { + /* Make sure that update updates to tx_dnext are perceived + * by timer routine. + */ + smp_wmb(); + + netif_stop_queue(net_dev); + + dev_dbg(PRIV_TO_DEV(priv), "Stopping netif queue\n"); + ec_bhf_print_status(priv); + } + + priv->stat_tx_bytes += len; + + dev_kfree_skb(skb); + + return NETDEV_TX_OK; +} + +static int ec_bhf_alloc_dma_mem(struct ec_bhf_priv *priv, + struct bhf_dma *buf, + int channel, + int size) +{ + int offset = channel * DMA_CHAN_SIZE + DMA_CHAN_OFFSET; + struct device *dev = PRIV_TO_DEV(priv); + u32 mask; + + iowrite32(0xffffffff, priv->dma_io + offset); + + mask = ioread32(priv->dma_io + offset); + mask &= DMA_WINDOW_SIZE_MASK; + dev_dbg(dev, "Read mask %x for channel %d\n", mask, channel); + + /* We want to allocate a chunk of memory that is: + * - aligned to the mask we just read + * - is of size 2^mask bytes (at most) + * In order to ensure that we will allocate buffer of + * 2 * 2^mask bytes. + */ + buf->len = min_t(int, ~mask + 1, size); + buf->alloc_len = 2 * buf->len; + + dev_dbg(dev, "Allocating %d bytes for channel %d", + (int)buf->alloc_len, channel); + buf->alloc = dma_alloc_coherent(dev, buf->alloc_len, &buf->alloc_phys, + GFP_KERNEL); + if (buf->alloc == NULL) { + dev_info(dev, "Failed to allocate buffer\n"); + return -ENOMEM; + } + + buf->buf_phys = (buf->alloc_phys + buf->len) & mask; + buf->buf = buf->alloc + (buf->buf_phys - buf->alloc_phys); + + iowrite32(0, priv->dma_io + offset + 4); + iowrite32(buf->buf_phys, priv->dma_io + offset); + dev_dbg(dev, "Buffer: %x and read from dev: %x", + (unsigned)buf->buf_phys, ioread32(priv->dma_io + offset)); + + return 0; +} + +static void ec_bhf_setup_tx_descs(struct ec_bhf_priv *priv) +{ + int i = 0; + + priv->tx_dcount = priv->tx_buf.len / sizeof(struct tx_desc); + priv->tx_descs = (struct tx_desc *) priv->tx_buf.buf; + priv->tx_dnext = 0; + + for (i = 0; i < priv->tx_dcount; i++) + priv->tx_descs[i].header.sent = cpu_to_le32(TX_HDR_SENT); +} + +static void ec_bhf_setup_rx_descs(struct ec_bhf_priv *priv) +{ + int i; + + priv->rx_dcount = priv->rx_buf.len / sizeof(struct rx_desc); + priv->rx_descs = (struct rx_desc *) priv->rx_buf.buf; + priv->rx_dnext = 0; + + for (i = 0; i < priv->rx_dcount; i++) { + struct rx_desc *desc = &priv->rx_descs[i]; + u32 next; + + if (i != priv->rx_dcount - 1) + next = (u8 *)(desc + 1) - priv->rx_buf.buf; + else + next = 0; + next |= RXHDR_NEXT_VALID; + desc->header.next = cpu_to_le32(next); + desc->header.recv = 0; + ec_bhf_add_rx_desc(priv, desc); + } +} + +static int ec_bhf_open(struct net_device *net_dev) +{ + struct ec_bhf_priv *priv = netdev_priv(net_dev); + struct device *dev = PRIV_TO_DEV(priv); + int err = 0; + + dev_info(dev, "Opening device\n"); + + ec_bhf_reset(priv); + + err = ec_bhf_alloc_dma_mem(priv, &priv->rx_buf, priv->rx_dma_chan, + FIFO_SIZE * sizeof(struct rx_desc)); + if (err) { + dev_err(dev, "Failed to allocate rx buffer\n"); + goto out; + } + ec_bhf_setup_rx_descs(priv); + + dev_info(dev, "RX buffer allocated, address: %x\n", + (unsigned)priv->rx_buf.buf_phys); + + err = ec_bhf_alloc_dma_mem(priv, &priv->tx_buf, priv->tx_dma_chan, + FIFO_SIZE * sizeof(struct tx_desc)); + if (err) { + dev_err(dev, "Failed to allocate tx buffer\n"); + goto error_rx_free; + } + dev_dbg(dev, "TX buffer allocated, addres: %x\n", + (unsigned)priv->tx_buf.buf_phys); + + iowrite8(0, priv->mii_io + MII_MAC_FILT_FLAG); + + ec_bhf_setup_tx_descs(priv); + + netif_start_queue(net_dev); + + hrtimer_init(&priv->hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); + priv->hrtimer.function = ec_bhf_timer_fun; + hrtimer_start(&priv->hrtimer, ktime_set(0, polling_frequency), + HRTIMER_MODE_REL); + + dev_info(PRIV_TO_DEV(priv), "Device open\n"); + + ec_bhf_print_status(priv); + + return 0; + +error_rx_free: + dma_free_coherent(dev, priv->rx_buf.alloc_len, priv->rx_buf.alloc, + priv->rx_buf.alloc_len); +out: + return err; +} + +static int ec_bhf_stop(struct net_device *net_dev) +{ + struct ec_bhf_priv *priv = netdev_priv(net_dev); + struct device *dev = PRIV_TO_DEV(priv); + + hrtimer_cancel(&priv->hrtimer); + + ec_bhf_reset(priv); + + netif_tx_disable(net_dev); + + dma_free_coherent(dev, priv->tx_buf.alloc_len, + priv->tx_buf.alloc, priv->tx_buf.alloc_phys); + dma_free_coherent(dev, priv->rx_buf.alloc_len, + priv->rx_buf.alloc, priv->rx_buf.alloc_phys); + + return 0; +} + +static struct rtnl_link_stats64 * +ec_bhf_get_stats(struct net_device *net_dev, + struct rtnl_link_stats64 *stats) +{ + struct ec_bhf_priv *priv = netdev_priv(net_dev); + + stats->rx_errors = ioread8(priv->mac_io + MAC_RX_ERR_CNT) + + ioread8(priv->mac_io + MAC_CRC_ERR_CNT) + + ioread8(priv->mac_io + MAC_FRAME_ERR_CNT); + stats->rx_packets = ioread32(priv->mac_io + MAC_RX_FRAME_CNT); + stats->tx_packets = ioread32(priv->mac_io + MAC_TX_FRAME_CNT); + stats->rx_dropped = ioread8(priv->mac_io + MAC_DROPPED_FRMS); + + stats->tx_bytes = priv->stat_tx_bytes; + stats->rx_bytes = priv->stat_rx_bytes; + + return stats; +} + +static const struct net_device_ops ec_bhf_netdev_ops = { + .ndo_start_xmit = ec_bhf_start_xmit, + .ndo_open = ec_bhf_open, + .ndo_stop = ec_bhf_stop, + .ndo_get_stats64 = ec_bhf_get_stats, + .ndo_change_mtu = eth_change_mtu, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr +}; + +static int ec_bhf_probe(struct pci_dev *dev, const struct pci_device_id *id) +{ + struct net_device *net_dev; + struct ec_bhf_priv *priv; + void * __iomem dma_io; + void * __iomem io; + int err = 0; + + err = pci_enable_device(dev); + if (err) + return err; + + pci_set_master(dev); + + err = pci_set_dma_mask(dev, DMA_BIT_MASK(32)); + if (err) { + dev_err(&dev->dev, + "Required dma mask not supported, failed to initialize device\n"); + err = -EIO; + goto err_disable_dev; + } + + err = pci_set_consistent_dma_mask(dev, DMA_BIT_MASK(32)); + if (err) { + dev_err(&dev->dev, + "Required dma mask not supported, failed to initialize device\n"); + goto err_disable_dev; + } + + err = pci_request_regions(dev, "ec_bhf"); + if (err) { + dev_err(&dev->dev, "Failed to request pci memory regions\n"); + goto err_disable_dev; + } + + io = pci_iomap(dev, 0, 0); + if (!io) { + dev_err(&dev->dev, "Failed to map pci card memory bar 0"); + err = -EIO; + goto err_release_regions; + } + + dma_io = pci_iomap(dev, 2, 0); + if (!dma_io) { + dev_err(&dev->dev, "Failed to map pci card memory bar 2"); + err = -EIO; + goto err_unmap; + } + + net_dev = alloc_etherdev(sizeof(struct ec_bhf_priv)); + if (net_dev == 0) { + err = -ENOMEM; + goto err_unmap_dma_io; + } + + pci_set_drvdata(dev, net_dev); + SET_NETDEV_DEV(net_dev, &dev->dev); + + net_dev->features = 0; + net_dev->flags |= IFF_NOARP; + + net_dev->netdev_ops = &ec_bhf_netdev_ops; + + priv = netdev_priv(net_dev); + priv->net_dev = net_dev; + priv->io = io; + priv->dma_io = dma_io; + priv->dev = dev; + + err = ec_bhf_setup_offsets(priv); + if (err < 0) + goto err_free_net_dev; + + memcpy_fromio(net_dev->dev_addr, priv->mii_io + MII_MAC_ADDR, 6); + + dev_dbg(&dev->dev, "CX5020 Ethercat master address: %pM\n", + net_dev->dev_addr); + + err = register_netdev(net_dev); + if (err < 0) + goto err_free_net_dev; + + return 0; + +err_free_net_dev: + free_netdev(net_dev); +err_unmap_dma_io: + pci_iounmap(dev, dma_io); +err_unmap: + pci_iounmap(dev, io); +err_release_regions: + pci_release_regions(dev); +err_disable_dev: + pci_clear_master(dev); + pci_disable_device(dev); + + return err; +} + +static void ec_bhf_remove(struct pci_dev *dev) +{ + struct net_device *net_dev = pci_get_drvdata(dev); + struct ec_bhf_priv *priv = netdev_priv(net_dev); + + unregister_netdev(net_dev); + free_netdev(net_dev); + + pci_iounmap(dev, priv->dma_io); + pci_iounmap(dev, priv->io); + pci_release_regions(dev); + pci_clear_master(dev); + pci_disable_device(dev); +} + +static struct pci_driver pci_driver = { + .name = "ec_bhf", + .id_table = ids, + .probe = ec_bhf_probe, + .remove = ec_bhf_remove, +}; + +static int __init ec_bhf_init(void) +{ + return pci_register_driver(&pci_driver); +} + +static void __exit ec_bhf_exit(void) +{ + pci_unregister_driver(&pci_driver); +} + +module_init(ec_bhf_init); +module_exit(ec_bhf_exit); + +module_param(polling_frequency, long, S_IRUGO); +MODULE_PARM_DESC(polling_frequency, "Polling timer frequency in ns"); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Dariusz Marcinkiewicz "); -- cgit v1.2.3 From 6b5eeb7f874b689403e52a646e485d0191ab9507 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Fri, 9 May 2014 14:45:00 +0200 Subject: net: cdc_mbim: handle unaccelerated VLAN tagged frames MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This driver maps 802.1q VLANs to MBIM sessions. The mapping is based on a bogus assumption that all tagged frames will use the acceleration API because we enable NETIF_F_HW_VLAN_CTAG_TX. This fails for e.g. frames tagged in userspace using packet sockets. Such frames will erroneously be considered as untagged and silently dropped based on not being IP. Fix by falling back to looking into the ethernet header for a tag if no accelerated tag was found. Fixes: a82c7ce5bc5b ("net: cdc_ncm: map MBIM IPS SessionID to VLAN ID") Cc: Greg Suarez Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/cdc_mbim.c | 39 ++++++++++++++++++++++++++++----------- 1 file changed, 28 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/cdc_mbim.c b/drivers/net/usb/cdc_mbim.c index 13f7705fd679..2e025ddcef21 100644 --- a/drivers/net/usb/cdc_mbim.c +++ b/drivers/net/usb/cdc_mbim.c @@ -120,6 +120,16 @@ static void cdc_mbim_unbind(struct usbnet *dev, struct usb_interface *intf) cdc_ncm_unbind(dev, intf); } +/* verify that the ethernet protocol is IPv4 or IPv6 */ +static bool is_ip_proto(__be16 proto) +{ + switch (proto) { + case htons(ETH_P_IP): + case htons(ETH_P_IPV6): + return true; + } + return false; +} static struct sk_buff *cdc_mbim_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags) { @@ -128,6 +138,7 @@ static struct sk_buff *cdc_mbim_tx_fixup(struct usbnet *dev, struct sk_buff *skb struct cdc_ncm_ctx *ctx = info->ctx; __le32 sign = cpu_to_le32(USB_CDC_MBIM_NDP16_IPS_SIGN); u16 tci = 0; + bool is_ip; u8 *c; if (!ctx) @@ -137,25 +148,32 @@ static struct sk_buff *cdc_mbim_tx_fixup(struct usbnet *dev, struct sk_buff *skb if (skb->len <= ETH_HLEN) goto error; + /* Some applications using e.g. packet sockets will + * bypass the VLAN acceleration and create tagged + * ethernet frames directly. We primarily look for + * the accelerated out-of-band tag, but fall back if + * required + */ + skb_reset_mac_header(skb); + if (vlan_get_tag(skb, &tci) < 0 && skb->len > VLAN_ETH_HLEN && + __vlan_get_tag(skb, &tci) == 0) { + is_ip = is_ip_proto(vlan_eth_hdr(skb)->h_vlan_encapsulated_proto); + skb_pull(skb, VLAN_ETH_HLEN); + } else { + is_ip = is_ip_proto(eth_hdr(skb)->h_proto); + skb_pull(skb, ETH_HLEN); + } + /* mapping VLANs to MBIM sessions: * no tag => IPS session <0> * 1 - 255 => IPS session * 256 - 511 => DSS session * 512 - 4095 => unsupported, drop */ - vlan_get_tag(skb, &tci); - switch (tci & 0x0f00) { case 0x0000: /* VLAN ID 0 - 255 */ - /* verify that datagram is IPv4 or IPv6 */ - skb_reset_mac_header(skb); - switch (eth_hdr(skb)->h_proto) { - case htons(ETH_P_IP): - case htons(ETH_P_IPV6): - break; - default: + if (!is_ip) goto error; - } c = (u8 *)&sign; c[3] = tci; break; @@ -169,7 +187,6 @@ static struct sk_buff *cdc_mbim_tx_fixup(struct usbnet *dev, struct sk_buff *skb "unsupported tci=0x%04x\n", tci); goto error; } - skb_pull(skb, ETH_HLEN); } spin_lock_bh(&ctx->mtx); -- cgit v1.2.3 From 7f52da56f76f61112a9c1db41975376764828e71 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 8 May 2014 10:09:21 +0200 Subject: net: mdio-gpio: warn about missing bus alias id Use a sane default bus id (rather than -ENODEV) and print a warning when the bus alias id is missing. Signed-off-by: Johan Hovold Signed-off-by: David S. Miller --- drivers/net/phy/mdio-gpio.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c index 9c4defdec67b..5f1a2250018f 100644 --- a/drivers/net/phy/mdio-gpio.c +++ b/drivers/net/phy/mdio-gpio.c @@ -215,6 +215,10 @@ static int mdio_gpio_probe(struct platform_device *pdev) if (pdev->dev.of_node) { pdata = mdio_gpio_of_get_data(pdev); bus_id = of_alias_get_id(pdev->dev.of_node, "mdio-gpio"); + if (bus_id < 0) { + dev_warn(&pdev->dev, "failed to get alias id\n"); + bus_id = 0; + } } else { pdata = dev_get_platdata(&pdev->dev); bus_id = pdev->id; -- cgit v1.2.3 From 59993f48b38fd46863b23bb1bb1dc3291e7278fb Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 8 May 2014 10:09:22 +0200 Subject: Revert "net: eth: cpsw: Correctly attach to GPIO bitbang MDIO driver" This reverts commit f8d56d8f892be43a2404356073e16401eb5a42e6 ("net: eth: cpsw: Correctly attach to GPIO bitbang MDIO driver"). Fix potential null-pointer dereference at probe if the mdio-gpio device has not been successfully probed yet. The offending commit is plain wrong for a number of reasons. First of all it accesses internal driver data of an unrelated device. Neither does it check that the data is non-null (which it is in case the device has not been probed yet). Furthermore, the decision on whether to treat any driver data according to the mdio-gpio driver's internals is made based on the node name. But the name is not compared against "mdio" which is the normal name for the node, but rather against "gpio" which the node does not have to be named (and shouldn't be according to the binding documentation). [ If this hack is to be kept out-of-tree it should at least be matching against the compatible property. ] Cc: Stefan Roese Cc: stable # v3.14 Signed-off-by: Johan Hovold Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw.c | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 36aa109416c4..18d83d8d7f74 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -1871,18 +1871,8 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data, mdio_node = of_find_node_by_phandle(be32_to_cpup(parp)); phyid = be32_to_cpup(parp+1); mdio = of_find_device_by_node(mdio_node); - - if (strncmp(mdio->name, "gpio", 4) == 0) { - /* GPIO bitbang MDIO driver attached */ - struct mii_bus *bus = dev_get_drvdata(&mdio->dev); - - snprintf(slave_data->phy_id, sizeof(slave_data->phy_id), - PHY_ID_FMT, bus->id, phyid); - } else { - /* davinci MDIO driver attached */ - snprintf(slave_data->phy_id, sizeof(slave_data->phy_id), - PHY_ID_FMT, mdio->name, phyid); - } + snprintf(slave_data->phy_id, sizeof(slave_data->phy_id), + PHY_ID_FMT, mdio->name, phyid); mac_addr = of_get_mac_address(slave_node); if (mac_addr) -- cgit v1.2.3 From 6954cc1f238199e971ec905c5cc87120806ac981 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 8 May 2014 10:09:23 +0200 Subject: net: cpsw: fix null dereference at probe Fix null-pointer dereference at probe when the mdio platform device is missing (e.g. when it has been disabled in DT). Cc: stable # v3.8 Signed-off-by: Johan Hovold Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 18d83d8d7f74..db9360cd861c 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -1871,6 +1871,10 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data, mdio_node = of_find_node_by_phandle(be32_to_cpup(parp)); phyid = be32_to_cpup(parp+1); mdio = of_find_device_by_node(mdio_node); + if (!mdio) { + pr_err("Missing mdio platform device\n"); + return -EINVAL; + } snprintf(slave_data->phy_id, sizeof(slave_data->phy_id), PHY_ID_FMT, mdio->name, phyid); -- cgit v1.2.3 From 60e71ab56b5fbd839aaef4f4af7778d86e0206f0 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 8 May 2014 10:09:24 +0200 Subject: net: cpsw: add missing of_node_put Add missing of_node_put to avoid kref leak. Signed-off-by: Johan Hovold Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index db9360cd861c..c331b7ebc812 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -1871,6 +1871,7 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data, mdio_node = of_find_node_by_phandle(be32_to_cpup(parp)); phyid = be32_to_cpup(parp+1); mdio = of_find_device_by_node(mdio_node); + of_node_put(mdio_node); if (!mdio) { pr_err("Missing mdio platform device\n"); return -EINVAL; -- cgit v1.2.3 From de682941eef3e5f6d1b653a6c214bc8a288f17c1 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Thu, 8 May 2014 12:34:31 +0300 Subject: bnx2x: Fix UNDI driver unload Commit 91ebb928b "bnx2x: Add support for Multi-Function UNDI" contains a bug which prevent the emptying of the device's Rx buffers before reset. As a result, on new boards it is likely HW will reach some fatal assertion once its interfaces load after UNDI was previously loaded. Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index b260913db236..3b0d43154e67 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -10051,8 +10051,8 @@ static void bnx2x_prev_unload_close_mac(struct bnx2x *bp, #define BCM_5710_UNDI_FW_MF_MAJOR (0x07) #define BCM_5710_UNDI_FW_MF_MINOR (0x08) #define BCM_5710_UNDI_FW_MF_VERS (0x05) -#define BNX2X_PREV_UNDI_MF_PORT(p) (0x1a150c + ((p) << 4)) -#define BNX2X_PREV_UNDI_MF_FUNC(f) (0x1a184c + ((f) << 4)) +#define BNX2X_PREV_UNDI_MF_PORT(p) (BAR_TSTRORM_INTMEM + 0x150c + ((p) << 4)) +#define BNX2X_PREV_UNDI_MF_FUNC(f) (BAR_TSTRORM_INTMEM + 0x184c + ((f) << 4)) static bool bnx2x_prev_unload_undi_fw_supports_mf(struct bnx2x *bp) { u8 major, minor, version; @@ -10352,6 +10352,7 @@ static int bnx2x_prev_unload_common(struct bnx2x *bp) /* Reset should be performed after BRB is emptied */ if (reset_reg & MISC_REGISTERS_RESET_REG_1_RST_BRB1) { u32 timer_count = 1000; + bool need_write = true; /* Close the MAC Rx to prevent BRB from filling up */ bnx2x_prev_unload_close_mac(bp, &mac_vals); @@ -10398,7 +10399,10 @@ static int bnx2x_prev_unload_common(struct bnx2x *bp) * cleaning methods - might be redundant but harmless. */ if (bnx2x_prev_unload_undi_fw_supports_mf(bp)) { - bnx2x_prev_unload_undi_mf(bp); + if (need_write) { + bnx2x_prev_unload_undi_mf(bp); + need_write = false; + } } else if (prev_undi) { /* If UNDI resides in memory, * manually increment it -- cgit v1.2.3 From a9de0500083c18589ba2ea4543135c1bea8419ec Mon Sep 17 00:00:00 2001 From: Emil Goode Date: Fri, 9 May 2014 01:07:17 +0200 Subject: net: cassini: use nested lock annotation In the cas_lock_tx function we acquire multiple locks in a loop and need to use nested lock annotation to prevent lockdep warnings. Reported-by: Meelis Roos Signed-off-by: Emil Goode Signed-off-by: David S. Miller --- drivers/net/ethernet/sun/cassini.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/sun/cassini.c b/drivers/net/ethernet/sun/cassini.c index df8d383acf48..b9ac20f42651 100644 --- a/drivers/net/ethernet/sun/cassini.c +++ b/drivers/net/ethernet/sun/cassini.c @@ -246,7 +246,7 @@ static inline void cas_lock_tx(struct cas *cp) int i; for (i = 0; i < N_TX_RINGS; i++) - spin_lock(&cp->tx_lock[i]); + spin_lock_nested(&cp->tx_lock[i], i); } static inline void cas_lock_all(struct cas *cp) -- cgit v1.2.3 From 1c4abec0baf25ffb92a28cc99d4231feeaa4d3f3 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 8 May 2014 09:48:10 +0300 Subject: iwlwifi: mvm: fix setting channel in monitor mode There was a deadlock in monitor mode when we were setting the channel if the channel was not 1. ====================================================== [ INFO: possible circular locking dependency detected ] 3.14.3 #4 Not tainted ------------------------------------------------------- iw/3323 is trying to acquire lock: (&local->chanctx_mtx){+.+.+.}, at: [] ieee80211_vif_release_channel+0x42/0xb0 [mac80211] but task is already holding lock: (&local->iflist_mtx){+.+...}, at: [] ieee80211_set_monitor_channel+0x5a/0x1b0 [mac80211] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&local->iflist_mtx){+.+...}: [] __lock_acquire+0xb3b/0x13b0 [] lock_acquire+0xb0/0x1f0 [] mutex_lock_nested+0x78/0x4f0 [] ieee80211_iterate_active_interfaces+0x2f/0x60 [mac80211] [] iwl_mvm_recalc_multicast+0x49/0xa0 [iwlmvm] [] iwl_mvm_configure_filter+0x4e/0x70 [iwlmvm] [] ieee80211_configure_filter+0x153/0x5f0 [mac80211] [] ieee80211_reconfig_filter+0x15/0x20 [mac80211] [snip] -> #1 (&mvm->mutex){+.+.+.}: [] __lock_acquire+0xb3b/0x13b0 [] lock_acquire+0xb0/0x1f0 [] mutex_lock_nested+0x78/0x4f0 [] iwl_mvm_add_chanctx+0x56/0xe0 [iwlmvm] [] ieee80211_new_chanctx+0x13e/0x410 [mac80211] [] ieee80211_vif_use_channel+0x1c3/0x5a0 [mac80211] [] ieee80211_add_virtual_monitor+0x1ab/0x6b0 [mac80211] [] ieee80211_do_open+0xe6a/0x15a0 [mac80211] [] ieee80211_open+0x59/0x60 [mac80211] [snip] -> #0 (&local->chanctx_mtx){+.+.+.}: [] check_prevs_add+0x977/0x980 [] __lock_acquire+0xb3b/0x13b0 [] lock_acquire+0xb0/0x1f0 [] mutex_lock_nested+0x78/0x4f0 [] ieee80211_vif_release_channel+0x42/0xb0 [mac80211] [] ieee80211_set_monitor_channel+0x113/0x1b0 [mac80211] [] cfg80211_set_monitor_channel+0x77/0x2b0 [cfg80211] [] __nl80211_set_channel+0x122/0x140 [cfg80211] [] nl80211_set_wiphy+0x284/0xaf0 [cfg80211] [snip] other info that might help us debug this: Chain exists of: &local->chanctx_mtx --> &mvm->mutex --> &local->iflist_mtx Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&local->iflist_mtx); lock(&mvm->mutex); lock(&local->iflist_mtx); lock(&local->chanctx_mtx); *** DEADLOCK *** This deadlock actually occurs: INFO: task iw:3323 blocked for more than 120 seconds. Not tainted 3.14.3 #4 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. iw D ffff8800c8afcd80 4192 3323 3322 0x00000000 ffff880078fdb7e0 0000000000000046 ffff8800c8afcd80 ffff880078fdbfd8 00000000001d5540 00000000001d5540 ffff8801141b0000 ffff8800c8afcd80 ffff880078ff9e38 ffff880078ff9e38 ffff880078ff9e40 0000000000000246 Call Trace: [] schedule_preempt_disabled+0x31/0x80 [] mutex_lock_nested+0x19d/0x4f0 [] ? ieee80211_iterate_active_interfaces+0x2f/0x60 [mac80211] [] ? ieee80211_iterate_active_interfaces+0x2f/0x60 [mac80211] [] ? iwl_mvm_power_mac_update_mode+0xc0/0xc0 [iwlmvm] [] ieee80211_iterate_active_interfaces+0x2f/0x60 [mac80211] [] _iwl_mvm_power_update_binding+0x27/0x80 [iwlmvm] [] iwl_mvm_unassign_vif_chanctx+0x81/0xc0 [iwlmvm] [] __ieee80211_vif_release_channel+0xdf/0x470 [mac80211] [] ieee80211_vif_release_channel+0x4a/0xb0 [mac80211] [] ieee80211_set_monitor_channel+0x113/0x1b0 [mac80211] [] cfg80211_set_monitor_channel+0x77/0x2b0 [cfg80211] [] __nl80211_set_channel+0x122/0x140 [cfg80211] [] nl80211_set_wiphy+0x284/0xaf0 [cfg80211] This fixes https://bugzilla.kernel.org/show_bug.cgi?id=75541 Cc: [3.13+] Reviewed-by: Johannes Berg Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/mac80211.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index 593f723a74c4..4b0b8b6571ee 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -1007,7 +1007,7 @@ static void iwl_mvm_mc_iface_iterator(void *_data, u8 *mac, memcpy(cmd->bssid, vif->bss_conf.bssid, ETH_ALEN); len = roundup(sizeof(*cmd) + cmd->count * ETH_ALEN, 4); - ret = iwl_mvm_send_cmd_pdu(mvm, MCAST_FILTER_CMD, CMD_SYNC, len, cmd); + ret = iwl_mvm_send_cmd_pdu(mvm, MCAST_FILTER_CMD, CMD_ASYNC, len, cmd); if (ret) IWL_ERR(mvm, "mcast filter cmd error. ret=%d\n", ret); } @@ -1023,7 +1023,7 @@ static void iwl_mvm_recalc_multicast(struct iwl_mvm *mvm) if (WARN_ON_ONCE(!mvm->mcast_filter_cmd)) return; - ieee80211_iterate_active_interfaces( + ieee80211_iterate_active_interfaces_atomic( mvm->hw, IEEE80211_IFACE_ITER_NORMAL, iwl_mvm_mc_iface_iterator, &iter_data); } -- cgit v1.2.3 From 1a466ae96e9f749d02a73315a3e66375e61a61dd Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 8 May 2014 14:54:42 -0700 Subject: ptp: fix kconfig dependency warnings Fix kconfig warnings: PTP_1588_CLOCK selects NET_PTP_CLASSIFY, which depends on NET, so PTP_1588_CLOCK should also depend on NET. PTP_1588_CLOCK_PCH selects PTP_1588_CLOCK so the former should depend on NET. warning: (IXP4XX_ETH && PTP_1588_CLOCK) selects NET_PTP_CLASSIFY which has unmet direct dependencies (NET) warning: (SFC && TILE_NET && BFIN_MAC_USE_HWSTAMP && TIGON3 && FEC && E1000E && IGB && IXGBE && I40E && MLX4_EN && SXGBE_ETH && STMMAC_ETH && TI_CPTS && PTP_1588_CLOCK_GIANFAR && PTP_1588_CLOCK_IXP46X && DP83640_PHY && PTP_1588_CLOCK_PCH) selects PTP_1588_CLOCK which has unmet direct dependencies (NET) [This warning is caused by the new 'depends on NET' in PTP_1588_CLOCK.] Signed-off-by: Randy Dunlap Acked-by: Richard Cochran Signed-off-by: David S. Miller --- drivers/ptp/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ptp/Kconfig b/drivers/ptp/Kconfig index 6963bdf54175..6aea373547f6 100644 --- a/drivers/ptp/Kconfig +++ b/drivers/ptp/Kconfig @@ -6,6 +6,7 @@ menu "PTP clock support" config PTP_1588_CLOCK tristate "PTP clock support" + depends on NET select PPS select NET_PTP_CLASSIFY help @@ -74,7 +75,7 @@ config DP83640_PHY config PTP_1588_CLOCK_PCH tristate "Intel PCH EG20T as PTP clock" depends on X86 || COMPILE_TEST - depends on HAS_IOMEM + depends on HAS_IOMEM && NET select PTP_1588_CLOCK help This driver adds support for using the PCH EG20T as a PTP -- cgit v1.2.3 From 03e5da151b8e390f2e28c4edf8fbbb6ca6d7a7ed Mon Sep 17 00:00:00 2001 From: Daniel Kim Date: Fri, 9 May 2014 12:37:05 +0200 Subject: brcmfmac: Fix iovar 'bw_cap' set command failure Fix iovar 'bw_cap' set command failure introduced by commit ff3b0fba6f25555ef59c55d138a467d0f81d82d7 Author: Arend van Spriel Date: Sat Mar 15 12:00:57 2014 +0100 brcmfmac: fallback to mimo_bw_cap for older firmwares This resulted in disabling 20MHz operation in the firmware. Reviewed-by: Arend Van Spriel Signed-off-by: Daniel Kim Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index afb3d15e38ff..be1985296bdc 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -4948,7 +4948,7 @@ static int brcmf_enable_bw40_2g(struct brcmf_if *ifp) if (!err) { /* only set 2G bandwidth using bw_cap command */ band_bwcap.band = cpu_to_le32(WLC_BAND_2G); - band_bwcap.bw_cap = cpu_to_le32(WLC_BW_40MHZ_BIT); + band_bwcap.bw_cap = cpu_to_le32(WLC_BW_CAP_40MHZ); err = brcmf_fil_iovar_data_set(ifp, "bw_cap", &band_bwcap, sizeof(band_bwcap)); } else { -- cgit v1.2.3 From bbeb0eadcf9fe74fb2b9b1a6fea82cd538b1e556 Mon Sep 17 00:00:00 2001 From: Peter Christensen Date: Thu, 8 May 2014 11:15:37 +0200 Subject: macvlan: Don't propagate IFF_ALLMULTI changes on down interfaces. Clearing the IFF_ALLMULTI flag on a down interface could cause an allmulti overflow on the underlying interface. Attempting the set IFF_ALLMULTI on the underlying interface would cause an error and the log message: "allmulti touches root, set allmulti failed." Signed-off-by: Peter Christensen Signed-off-by: David S. Miller --- drivers/net/macvlan.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index b0e2865a6810..c5fb9cf95c12 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -458,8 +458,10 @@ static void macvlan_change_rx_flags(struct net_device *dev, int change) struct macvlan_dev *vlan = netdev_priv(dev); struct net_device *lowerdev = vlan->lowerdev; - if (change & IFF_ALLMULTI) - dev_set_allmulti(lowerdev, dev->flags & IFF_ALLMULTI ? 1 : -1); + if (dev->flags & IFF_UP) { + if (change & IFF_ALLMULTI) + dev_set_allmulti(lowerdev, dev->flags & IFF_ALLMULTI ? 1 : -1); + } } static void macvlan_set_mac_lists(struct net_device *dev) -- cgit v1.2.3 From 1c3639005f48492e5f2d965779efd814e80f8b15 Mon Sep 17 00:00:00 2001 From: Nikolay Aleksandrov Date: Fri, 9 May 2014 11:11:39 +0200 Subject: sfc: fix calling of free_irq with already free vector If the sfc driver is in legacy interrupt mode (either explicitly by using interrupt_mode module param or by falling back to it) it will hit a warning at kernel/irq/manage.c because it will try to free an irq which wasn't allocated by it in the first place because the MSI(X) irqs are zero and it'll try to free them unconditionally. So fix it by checking if we're in legacy mode and freeing the appropriate irqs. CC: Zenghui Shi CC: Ben Hutchings CC: CC: Shradha Shah CC: David S. Miller Fixes: 1899c111a535 ("sfc: Fix IRQ cleanup in case of a probe failure") Reported-by: Zenghui Shi Signed-off-by: Nikolay Aleksandrov Acked-by: Shradha Shah Signed-off-by: David S. Miller --- drivers/net/ethernet/sfc/nic.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/sfc/nic.c b/drivers/net/ethernet/sfc/nic.c index 32d969e857f7..89b83e59e1dc 100644 --- a/drivers/net/ethernet/sfc/nic.c +++ b/drivers/net/ethernet/sfc/nic.c @@ -156,13 +156,15 @@ void efx_nic_fini_interrupt(struct efx_nic *efx) efx->net_dev->rx_cpu_rmap = NULL; #endif - /* Disable MSI/MSI-X interrupts */ - efx_for_each_channel(channel, efx) - free_irq(channel->irq, &efx->msi_context[channel->channel]); - - /* Disable legacy interrupt */ - if (efx->legacy_irq) + if (EFX_INT_MODE_USE_MSI(efx)) { + /* Disable MSI/MSI-X interrupts */ + efx_for_each_channel(channel, efx) + free_irq(channel->irq, + &efx->msi_context[channel->channel]); + } else { + /* Disable legacy interrupt */ free_irq(efx->legacy_irq, efx); + } } /* Register dump */ -- cgit v1.2.3 From 64793110ad4d82e18d88a33307749c6562a6dd04 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Sun, 11 May 2014 19:59:43 +0300 Subject: iwlwifi: mvm: fix off-by-one in scan channels configuration tail should be equal to the last valid index, so decrease it by one. This error causes in "a gap" in some cases (as well as some possible out-of-bound write), finally resulting in ucode assertion. Signed-off-by: Eliad Peller Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/scan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c index cba88a379fc8..c28de54c75d4 100644 --- a/drivers/net/wireless/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/iwlwifi/mvm/scan.c @@ -732,7 +732,7 @@ int iwl_mvm_config_sched_scan(struct iwl_mvm *mvm, int band_2ghz = mvm->nvm_data->bands[IEEE80211_BAND_2GHZ].n_channels; int band_5ghz = mvm->nvm_data->bands[IEEE80211_BAND_5GHZ].n_channels; int head = 0; - int tail = band_2ghz + band_5ghz; + int tail = band_2ghz + band_5ghz - 1; u32 ssid_bitmap; int cmd_len; int ret; -- cgit v1.2.3 From b538b8ce76f69f7fa225bc0817bbb361b877ea23 Mon Sep 17 00:00:00 2001 From: David Spinadel Date: Tue, 13 May 2014 14:29:36 +0300 Subject: iwlwifi: mvm: prevent sched scan while not idle Prevent sched scan while not idle (including during association or in AP mode) instead of while associated only. This fixes my previous commit which was incomplete: commit bd5e4744a6ca64299b57a2682c720d00a475a734 Author: David Spinadel Date: Thu Apr 24 13:15:29 2014 +0300 iwlwifi: mvm: do no sched scan while associated Currently the FW doesn't support sched scan while associated, Prevent it. Signed-off-by: David Spinadel Reviewed-by: Johannes Berg Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/mac80211.c | 2 +- drivers/net/wireless/iwlwifi/mvm/mvm.h | 2 +- drivers/net/wireless/iwlwifi/mvm/utils.c | 16 ++++++++-------- 3 files changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index 4b0b8b6571ee..b41dc84e9431 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -1807,7 +1807,7 @@ static int iwl_mvm_mac_sched_scan_start(struct ieee80211_hw *hw, mutex_lock(&mvm->mutex); - if (iwl_mvm_is_associated(mvm)) { + if (!iwl_mvm_is_idle(mvm)) { ret = -EBUSY; goto out; } diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h index 84c75a1b267e..f1ec0986c3c9 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h @@ -1004,7 +1004,7 @@ static inline bool iwl_mvm_vif_low_latency(struct iwl_mvm_vif *mvmvif) } /* Assoc status */ -bool iwl_mvm_is_associated(struct iwl_mvm *mvm); +bool iwl_mvm_is_idle(struct iwl_mvm *mvm); /* Thermal management and CT-kill */ void iwl_mvm_tt_tx_backoff(struct iwl_mvm *mvm, u32 backoff); diff --git a/drivers/net/wireless/iwlwifi/mvm/utils.c b/drivers/net/wireless/iwlwifi/mvm/utils.c index 6fdbef9696d8..2180902266ae 100644 --- a/drivers/net/wireless/iwlwifi/mvm/utils.c +++ b/drivers/net/wireless/iwlwifi/mvm/utils.c @@ -645,21 +645,21 @@ bool iwl_mvm_low_latency(struct iwl_mvm *mvm) return result; } -static void iwl_mvm_assoc_iter(void *_data, u8 *mac, struct ieee80211_vif *vif) +static void iwl_mvm_idle_iter(void *_data, u8 *mac, struct ieee80211_vif *vif) { - bool *assoc = _data; + bool *idle = _data; - if (vif->bss_conf.assoc) - *assoc = true; + if (!vif->bss_conf.idle) + *idle = false; } -bool iwl_mvm_is_associated(struct iwl_mvm *mvm) +bool iwl_mvm_is_idle(struct iwl_mvm *mvm) { - bool assoc = false; + bool idle = true; ieee80211_iterate_active_interfaces_atomic( mvm->hw, IEEE80211_IFACE_ITER_NORMAL, - iwl_mvm_assoc_iter, &assoc); + iwl_mvm_idle_iter, &idle); - return assoc; + return idle; } -- cgit v1.2.3 From c4b160685fc85e41fe8c08478cc61f4877d26973 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Mon, 12 May 2014 10:38:18 -0400 Subject: jme: Fix unmap loop counting error: In my recent fix (76a691d0a: fix dma unmap warning), Ben Hutchings noted that my loop count was incorrect. Where j started at startidx, it should have started at zero, and gone on for count entries, not to endidx. Additionally, a DMA resource exhaustion should drop the frame and (for now), return NETDEV_TX_OK, not NETEV_TX_BUSY. This patch fixes both of those issues: Signed-off-by: Neil Horman CC: Ben Hutchings CC: "David S. Miller" CC: Guo-Fu Tseng Signed-off-by: David S. Miller --- drivers/net/ethernet/jme.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/jme.c b/drivers/net/ethernet/jme.c index 6e664d9038d6..b78378cea5e3 100644 --- a/drivers/net/ethernet/jme.c +++ b/drivers/net/ethernet/jme.c @@ -2027,14 +2027,14 @@ jme_fill_tx_map(struct pci_dev *pdev, return 0; } -static void jme_drop_tx_map(struct jme_adapter *jme, int startidx, int endidx) +static void jme_drop_tx_map(struct jme_adapter *jme, int startidx, int count) { struct jme_ring *txring = &(jme->txring[0]); struct jme_buffer_info *txbi = txring->bufinf, *ctxbi; int mask = jme->tx_ring_mask; int j; - for (j = startidx ; j < endidx ; ++j) { + for (j = 0 ; j < count ; j++) { ctxbi = txbi + ((startidx + j + 2) & (mask)); pci_unmap_page(jme->pdev, ctxbi->mapping, @@ -2069,7 +2069,7 @@ jme_map_tx_skb(struct jme_adapter *jme, struct sk_buff *skb, int idx) skb_frag_page(frag), frag->page_offset, skb_frag_size(frag), hidma); if (ret) { - jme_drop_tx_map(jme, idx, idx+i); + jme_drop_tx_map(jme, idx, i); goto out; } @@ -2081,7 +2081,7 @@ jme_map_tx_skb(struct jme_adapter *jme, struct sk_buff *skb, int idx) ret = jme_fill_tx_map(jme->pdev, ctxdesc, ctxbi, virt_to_page(skb->data), offset_in_page(skb->data), len, hidma); if (ret) - jme_drop_tx_map(jme, idx, idx+i); + jme_drop_tx_map(jme, idx, i); out: return ret; @@ -2269,7 +2269,7 @@ jme_start_xmit(struct sk_buff *skb, struct net_device *netdev) } if (jme_fill_tx_desc(jme, skb, idx)) - return NETDEV_TX_BUSY; + return NETDEV_TX_OK; jwrite32(jme, JME_TXCS, jme->reg_txcs | TXCS_SELECT_QUEUE0 | -- cgit v1.2.3 From 03a58baa785f48a85126ab043a14cb80b7e670e0 Mon Sep 17 00:00:00 2001 From: Kalesh AP Date: Tue, 13 May 2014 14:03:11 +0530 Subject: be2net: enable interrupts in EEH resume On some BE3 FW versions, after a HW reset, interrupts will remain disabled for each function. So, explicitly enable the interrupts in the eeh_resume handler, else after an eeh recovery interrupts wouldn't work. Signed-off-by: Kalesh AP Signed-off-by: Sathya Perla Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_main.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index a18645407d21..dc19bc5dec77 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -4949,6 +4949,12 @@ static void be_eeh_resume(struct pci_dev *pdev) if (status) goto err; + /* On some BE3 FW versions, after a HW reset, + * interrupts will remain disabled for each function. + * So, explicitly enable interrupts + */ + be_intr_set(adapter, true); + /* tell fw we're ready to fire cmds */ status = be_cmd_fw_init(adapter); if (status) -- cgit v1.2.3 From faf1dc64e345ac4de5c4429df6ed492255ae2248 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Wed, 14 May 2014 14:39:21 +0530 Subject: ath9k_htc: Stop ANI before doing hw_reset During remain on channel request, ANI worker thread is not stopped before doing hw reset. This is causing kernel crash in hw_per_calibration. This change ensures that ANI is stopped before doing chip reset and it will be rescheduled later when the chip is configured back to home channel and having valid bss. Reported-by: David Herrmann Tested-by: David Herrmann Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/htc_drv_main.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c index f46cd0250e48..5627917c5ff7 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c @@ -95,8 +95,10 @@ static void ath9k_htc_vif_iter(void *data, u8 *mac, struct ieee80211_vif *vif) if ((vif->type == NL80211_IFTYPE_AP || vif->type == NL80211_IFTYPE_MESH_POINT) && - bss_conf->enable_beacon) + bss_conf->enable_beacon) { priv->reconfig_beacon = true; + priv->rearm_ani = true; + } if (bss_conf->assoc) { priv->rearm_ani = true; @@ -257,6 +259,7 @@ static int ath9k_htc_set_channel(struct ath9k_htc_priv *priv, ath9k_htc_ps_wakeup(priv); + ath9k_htc_stop_ani(priv); del_timer_sync(&priv->tx.cleanup_timer); ath9k_htc_tx_drain(priv); -- cgit v1.2.3 From 898305806ad56ae11dc2c80931062e6a2c7bba48 Mon Sep 17 00:00:00 2001 From: Vince Bridgers Date: Wed, 14 May 2014 14:38:36 -0500 Subject: Altera TSE: Fix sparse errors and warnings This patch fixes the many sparse errors and warnings contained in the initial submission of the Altera Triple Speed Ethernet driver, and a few minor cppcheck warnings. Changes are tested on ARM and NIOS2 example designs, and compile tested against multiple architectures. Typical issues addressed were as follows: altera_tse_ethtool.c:136:19: warning: incorrect type in argument 1 (different address spaces) altera_tse_ethtool.c:136:19: expected void const volatile [noderef] *addr altera_tse_ethtool.c:136:19: got unsigned int * ... altera_sgdma.c:129:31: warning: cast removes address space of expression Signed-off-by: Vince Bridgers Signed-off-by: David S. Miller --- drivers/net/ethernet/altera/Makefile | 1 + drivers/net/ethernet/altera/altera_msgdma.c | 110 +++++++------- drivers/net/ethernet/altera/altera_msgdmahw.h | 13 +- drivers/net/ethernet/altera/altera_sgdma.c | 181 +++++++++++------------ drivers/net/ethernet/altera/altera_sgdmahw.h | 26 ++-- drivers/net/ethernet/altera/altera_tse.h | 47 ++++++ drivers/net/ethernet/altera/altera_tse_ethtool.c | 108 +++++++++----- drivers/net/ethernet/altera/altera_tse_main.c | 128 +++++++++------- drivers/net/ethernet/altera/altera_utils.c | 20 +-- drivers/net/ethernet/altera/altera_utils.h | 8 +- 10 files changed, 367 insertions(+), 275 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/altera/Makefile b/drivers/net/ethernet/altera/Makefile index d4a187e45369..3eff2fd3997e 100644 --- a/drivers/net/ethernet/altera/Makefile +++ b/drivers/net/ethernet/altera/Makefile @@ -5,3 +5,4 @@ obj-$(CONFIG_ALTERA_TSE) += altera_tse.o altera_tse-objs := altera_tse_main.o altera_tse_ethtool.o \ altera_msgdma.o altera_sgdma.o altera_utils.o +ccflags-y += -D__CHECK_ENDIAN__ diff --git a/drivers/net/ethernet/altera/altera_msgdma.c b/drivers/net/ethernet/altera/altera_msgdma.c index 4d1f2fdd5c32..0fb986ba3290 100644 --- a/drivers/net/ethernet/altera/altera_msgdma.c +++ b/drivers/net/ethernet/altera/altera_msgdma.c @@ -37,18 +37,16 @@ void msgdma_start_rxdma(struct altera_tse_private *priv) void msgdma_reset(struct altera_tse_private *priv) { int counter; - struct msgdma_csr *txcsr = - (struct msgdma_csr *)priv->tx_dma_csr; - struct msgdma_csr *rxcsr = - (struct msgdma_csr *)priv->rx_dma_csr; /* Reset Rx mSGDMA */ - iowrite32(MSGDMA_CSR_STAT_MASK, &rxcsr->status); - iowrite32(MSGDMA_CSR_CTL_RESET, &rxcsr->control); + csrwr32(MSGDMA_CSR_STAT_MASK, priv->rx_dma_csr, + msgdma_csroffs(status)); + csrwr32(MSGDMA_CSR_CTL_RESET, priv->rx_dma_csr, + msgdma_csroffs(control)); counter = 0; while (counter++ < ALTERA_TSE_SW_RESET_WATCHDOG_CNTR) { - if (tse_bit_is_clear(&rxcsr->status, + if (tse_bit_is_clear(priv->rx_dma_csr, msgdma_csroffs(status), MSGDMA_CSR_STAT_RESETTING)) break; udelay(1); @@ -59,15 +57,18 @@ void msgdma_reset(struct altera_tse_private *priv) "TSE Rx mSGDMA resetting bit never cleared!\n"); /* clear all status bits */ - iowrite32(MSGDMA_CSR_STAT_MASK, &rxcsr->status); + csrwr32(MSGDMA_CSR_STAT_MASK, priv->rx_dma_csr, msgdma_csroffs(status)); /* Reset Tx mSGDMA */ - iowrite32(MSGDMA_CSR_STAT_MASK, &txcsr->status); - iowrite32(MSGDMA_CSR_CTL_RESET, &txcsr->control); + csrwr32(MSGDMA_CSR_STAT_MASK, priv->tx_dma_csr, + msgdma_csroffs(status)); + + csrwr32(MSGDMA_CSR_CTL_RESET, priv->tx_dma_csr, + msgdma_csroffs(control)); counter = 0; while (counter++ < ALTERA_TSE_SW_RESET_WATCHDOG_CNTR) { - if (tse_bit_is_clear(&txcsr->status, + if (tse_bit_is_clear(priv->tx_dma_csr, msgdma_csroffs(status), MSGDMA_CSR_STAT_RESETTING)) break; udelay(1); @@ -78,58 +79,58 @@ void msgdma_reset(struct altera_tse_private *priv) "TSE Tx mSGDMA resetting bit never cleared!\n"); /* clear all status bits */ - iowrite32(MSGDMA_CSR_STAT_MASK, &txcsr->status); + csrwr32(MSGDMA_CSR_STAT_MASK, priv->tx_dma_csr, msgdma_csroffs(status)); } void msgdma_disable_rxirq(struct altera_tse_private *priv) { - struct msgdma_csr *csr = priv->rx_dma_csr; - tse_clear_bit(&csr->control, MSGDMA_CSR_CTL_GLOBAL_INTR); + tse_clear_bit(priv->rx_dma_csr, msgdma_csroffs(control), + MSGDMA_CSR_CTL_GLOBAL_INTR); } void msgdma_enable_rxirq(struct altera_tse_private *priv) { - struct msgdma_csr *csr = priv->rx_dma_csr; - tse_set_bit(&csr->control, MSGDMA_CSR_CTL_GLOBAL_INTR); + tse_set_bit(priv->rx_dma_csr, msgdma_csroffs(control), + MSGDMA_CSR_CTL_GLOBAL_INTR); } void msgdma_disable_txirq(struct altera_tse_private *priv) { - struct msgdma_csr *csr = priv->tx_dma_csr; - tse_clear_bit(&csr->control, MSGDMA_CSR_CTL_GLOBAL_INTR); + tse_clear_bit(priv->tx_dma_csr, msgdma_csroffs(control), + MSGDMA_CSR_CTL_GLOBAL_INTR); } void msgdma_enable_txirq(struct altera_tse_private *priv) { - struct msgdma_csr *csr = priv->tx_dma_csr; - tse_set_bit(&csr->control, MSGDMA_CSR_CTL_GLOBAL_INTR); + tse_set_bit(priv->tx_dma_csr, msgdma_csroffs(control), + MSGDMA_CSR_CTL_GLOBAL_INTR); } void msgdma_clear_rxirq(struct altera_tse_private *priv) { - struct msgdma_csr *csr = priv->rx_dma_csr; - iowrite32(MSGDMA_CSR_STAT_IRQ, &csr->status); + csrwr32(MSGDMA_CSR_STAT_IRQ, priv->rx_dma_csr, msgdma_csroffs(status)); } void msgdma_clear_txirq(struct altera_tse_private *priv) { - struct msgdma_csr *csr = priv->tx_dma_csr; - iowrite32(MSGDMA_CSR_STAT_IRQ, &csr->status); + csrwr32(MSGDMA_CSR_STAT_IRQ, priv->tx_dma_csr, msgdma_csroffs(status)); } /* return 0 to indicate transmit is pending */ int msgdma_tx_buffer(struct altera_tse_private *priv, struct tse_buffer *buffer) { - struct msgdma_extended_desc *desc = priv->tx_dma_desc; - - iowrite32(lower_32_bits(buffer->dma_addr), &desc->read_addr_lo); - iowrite32(upper_32_bits(buffer->dma_addr), &desc->read_addr_hi); - iowrite32(0, &desc->write_addr_lo); - iowrite32(0, &desc->write_addr_hi); - iowrite32(buffer->len, &desc->len); - iowrite32(0, &desc->burst_seq_num); - iowrite32(MSGDMA_DESC_TX_STRIDE, &desc->stride); - iowrite32(MSGDMA_DESC_CTL_TX_SINGLE, &desc->control); + csrwr32(lower_32_bits(buffer->dma_addr), priv->tx_dma_desc, + msgdma_descroffs(read_addr_lo)); + csrwr32(upper_32_bits(buffer->dma_addr), priv->tx_dma_desc, + msgdma_descroffs(read_addr_hi)); + csrwr32(0, priv->tx_dma_desc, msgdma_descroffs(write_addr_lo)); + csrwr32(0, priv->tx_dma_desc, msgdma_descroffs(write_addr_hi)); + csrwr32(buffer->len, priv->tx_dma_desc, msgdma_descroffs(len)); + csrwr32(0, priv->tx_dma_desc, msgdma_descroffs(burst_seq_num)); + csrwr32(MSGDMA_DESC_TX_STRIDE, priv->tx_dma_desc, + msgdma_descroffs(stride)); + csrwr32(MSGDMA_DESC_CTL_TX_SINGLE, priv->tx_dma_desc, + msgdma_descroffs(control)); return 0; } @@ -138,17 +139,16 @@ u32 msgdma_tx_completions(struct altera_tse_private *priv) u32 ready = 0; u32 inuse; u32 status; - struct msgdma_csr *txcsr = - (struct msgdma_csr *)priv->tx_dma_csr; /* Get number of sent descriptors */ - inuse = ioread32(&txcsr->rw_fill_level) & 0xffff; + inuse = csrrd32(priv->tx_dma_csr, msgdma_csroffs(rw_fill_level)) + & 0xffff; if (inuse) { /* Tx FIFO is not empty */ ready = priv->tx_prod - priv->tx_cons - inuse - 1; } else { /* Check for buffered last packet */ - status = ioread32(&txcsr->status); + status = csrrd32(priv->tx_dma_csr, msgdma_csroffs(status)); if (status & MSGDMA_CSR_STAT_BUSY) ready = priv->tx_prod - priv->tx_cons - 1; else @@ -162,7 +162,6 @@ u32 msgdma_tx_completions(struct altera_tse_private *priv) void msgdma_add_rx_desc(struct altera_tse_private *priv, struct tse_buffer *rxbuffer) { - struct msgdma_extended_desc *desc = priv->rx_dma_desc; u32 len = priv->rx_dma_buf_sz; dma_addr_t dma_addr = rxbuffer->dma_addr; u32 control = (MSGDMA_DESC_CTL_END_ON_EOP @@ -172,14 +171,16 @@ void msgdma_add_rx_desc(struct altera_tse_private *priv, | MSGDMA_DESC_CTL_TR_ERR_IRQ | MSGDMA_DESC_CTL_GO); - iowrite32(0, &desc->read_addr_lo); - iowrite32(0, &desc->read_addr_hi); - iowrite32(lower_32_bits(dma_addr), &desc->write_addr_lo); - iowrite32(upper_32_bits(dma_addr), &desc->write_addr_hi); - iowrite32(len, &desc->len); - iowrite32(0, &desc->burst_seq_num); - iowrite32(0x00010001, &desc->stride); - iowrite32(control, &desc->control); + csrwr32(0, priv->rx_dma_desc, msgdma_descroffs(read_addr_lo)); + csrwr32(0, priv->rx_dma_desc, msgdma_descroffs(read_addr_hi)); + csrwr32(lower_32_bits(dma_addr), priv->rx_dma_desc, + msgdma_descroffs(write_addr_lo)); + csrwr32(upper_32_bits(dma_addr), priv->rx_dma_desc, + msgdma_descroffs(write_addr_hi)); + csrwr32(len, priv->rx_dma_desc, msgdma_descroffs(len)); + csrwr32(0, priv->rx_dma_desc, msgdma_descroffs(burst_seq_num)); + csrwr32(0x00010001, priv->rx_dma_desc, msgdma_descroffs(stride)); + csrwr32(control, priv->rx_dma_desc, msgdma_descroffs(control)); } /* status is returned on upper 16 bits, @@ -190,14 +191,13 @@ u32 msgdma_rx_status(struct altera_tse_private *priv) u32 rxstatus = 0; u32 pktlength; u32 pktstatus; - struct msgdma_csr *rxcsr = - (struct msgdma_csr *)priv->rx_dma_csr; - struct msgdma_response *rxresp = - (struct msgdma_response *)priv->rx_dma_resp; - - if (ioread32(&rxcsr->resp_fill_level) & 0xffff) { - pktlength = ioread32(&rxresp->bytes_transferred); - pktstatus = ioread32(&rxresp->status); + + if (csrrd32(priv->rx_dma_csr, msgdma_csroffs(resp_fill_level)) + & 0xffff) { + pktlength = csrrd32(priv->rx_dma_resp, + msgdma_respoffs(bytes_transferred)); + pktstatus = csrrd32(priv->rx_dma_resp, + msgdma_respoffs(status)); rxstatus = pktstatus; rxstatus = rxstatus << 16; rxstatus |= (pktlength & 0xffff); diff --git a/drivers/net/ethernet/altera/altera_msgdmahw.h b/drivers/net/ethernet/altera/altera_msgdmahw.h index d7b59ba4019c..e335626e1b6b 100644 --- a/drivers/net/ethernet/altera/altera_msgdmahw.h +++ b/drivers/net/ethernet/altera/altera_msgdmahw.h @@ -17,15 +17,6 @@ #ifndef __ALTERA_MSGDMAHW_H__ #define __ALTERA_MSGDMAHW_H__ -/* mSGDMA standard descriptor format - */ -struct msgdma_desc { - u32 read_addr; /* data buffer source address */ - u32 write_addr; /* data buffer destination address */ - u32 len; /* the number of bytes to transfer per descriptor */ - u32 control; /* characteristics of the transfer */ -}; - /* mSGDMA extended descriptor format */ struct msgdma_extended_desc { @@ -159,6 +150,10 @@ struct msgdma_response { u32 status; }; +#define msgdma_respoffs(a) (offsetof(struct msgdma_response, a)) +#define msgdma_csroffs(a) (offsetof(struct msgdma_csr, a)) +#define msgdma_descroffs(a) (offsetof(struct msgdma_extended_desc, a)) + /* mSGDMA response register bit definitions */ #define MSGDMA_RESP_EARLY_TERM BIT(8) diff --git a/drivers/net/ethernet/altera/altera_sgdma.c b/drivers/net/ethernet/altera/altera_sgdma.c index 9ce8630692b6..99cc56f451cf 100644 --- a/drivers/net/ethernet/altera/altera_sgdma.c +++ b/drivers/net/ethernet/altera/altera_sgdma.c @@ -20,8 +20,8 @@ #include "altera_sgdmahw.h" #include "altera_sgdma.h" -static void sgdma_setup_descrip(struct sgdma_descrip *desc, - struct sgdma_descrip *ndesc, +static void sgdma_setup_descrip(struct sgdma_descrip __iomem *desc, + struct sgdma_descrip __iomem *ndesc, dma_addr_t ndesc_phys, dma_addr_t raddr, dma_addr_t waddr, @@ -31,17 +31,17 @@ static void sgdma_setup_descrip(struct sgdma_descrip *desc, int wfixed); static int sgdma_async_write(struct altera_tse_private *priv, - struct sgdma_descrip *desc); + struct sgdma_descrip __iomem *desc); static int sgdma_async_read(struct altera_tse_private *priv); static dma_addr_t sgdma_txphysaddr(struct altera_tse_private *priv, - struct sgdma_descrip *desc); + struct sgdma_descrip __iomem *desc); static dma_addr_t sgdma_rxphysaddr(struct altera_tse_private *priv, - struct sgdma_descrip *desc); + struct sgdma_descrip __iomem *desc); static int sgdma_txbusy(struct altera_tse_private *priv); @@ -79,7 +79,8 @@ int sgdma_initialize(struct altera_tse_private *priv) priv->rxdescphys = (dma_addr_t) 0; priv->txdescphys = (dma_addr_t) 0; - priv->rxdescphys = dma_map_single(priv->device, priv->rx_dma_desc, + priv->rxdescphys = dma_map_single(priv->device, + (void __force *)priv->rx_dma_desc, priv->rxdescmem, DMA_BIDIRECTIONAL); if (dma_mapping_error(priv->device, priv->rxdescphys)) { @@ -88,7 +89,8 @@ int sgdma_initialize(struct altera_tse_private *priv) return -EINVAL; } - priv->txdescphys = dma_map_single(priv->device, priv->tx_dma_desc, + priv->txdescphys = dma_map_single(priv->device, + (void __force *)priv->tx_dma_desc, priv->txdescmem, DMA_TO_DEVICE); if (dma_mapping_error(priv->device, priv->txdescphys)) { @@ -98,8 +100,8 @@ int sgdma_initialize(struct altera_tse_private *priv) } /* Initialize descriptor memory to all 0's, sync memory to cache */ - memset(priv->tx_dma_desc, 0, priv->txdescmem); - memset(priv->rx_dma_desc, 0, priv->rxdescmem); + memset_io(priv->tx_dma_desc, 0, priv->txdescmem); + memset_io(priv->rx_dma_desc, 0, priv->rxdescmem); dma_sync_single_for_device(priv->device, priv->txdescphys, priv->txdescmem, DMA_TO_DEVICE); @@ -126,22 +128,15 @@ void sgdma_uninitialize(struct altera_tse_private *priv) */ void sgdma_reset(struct altera_tse_private *priv) { - u32 *ptxdescripmem = (u32 *)priv->tx_dma_desc; - u32 txdescriplen = priv->txdescmem; - u32 *prxdescripmem = (u32 *)priv->rx_dma_desc; - u32 rxdescriplen = priv->rxdescmem; - struct sgdma_csr *ptxsgdma = (struct sgdma_csr *)priv->tx_dma_csr; - struct sgdma_csr *prxsgdma = (struct sgdma_csr *)priv->rx_dma_csr; - /* Initialize descriptor memory to 0 */ - memset(ptxdescripmem, 0, txdescriplen); - memset(prxdescripmem, 0, rxdescriplen); + memset_io(priv->tx_dma_desc, 0, priv->txdescmem); + memset_io(priv->rx_dma_desc, 0, priv->rxdescmem); - iowrite32(SGDMA_CTRLREG_RESET, &ptxsgdma->control); - iowrite32(0, &ptxsgdma->control); + csrwr32(SGDMA_CTRLREG_RESET, priv->tx_dma_csr, sgdma_csroffs(control)); + csrwr32(0, priv->tx_dma_csr, sgdma_csroffs(control)); - iowrite32(SGDMA_CTRLREG_RESET, &prxsgdma->control); - iowrite32(0, &prxsgdma->control); + csrwr32(SGDMA_CTRLREG_RESET, priv->rx_dma_csr, sgdma_csroffs(control)); + csrwr32(0, priv->rx_dma_csr, sgdma_csroffs(control)); } /* For SGDMA, interrupts remain enabled after initially enabling, @@ -167,14 +162,14 @@ void sgdma_disable_txirq(struct altera_tse_private *priv) void sgdma_clear_rxirq(struct altera_tse_private *priv) { - struct sgdma_csr *csr = (struct sgdma_csr *)priv->rx_dma_csr; - tse_set_bit(&csr->control, SGDMA_CTRLREG_CLRINT); + tse_set_bit(priv->rx_dma_csr, sgdma_csroffs(control), + SGDMA_CTRLREG_CLRINT); } void sgdma_clear_txirq(struct altera_tse_private *priv) { - struct sgdma_csr *csr = (struct sgdma_csr *)priv->tx_dma_csr; - tse_set_bit(&csr->control, SGDMA_CTRLREG_CLRINT); + tse_set_bit(priv->tx_dma_csr, sgdma_csroffs(control), + SGDMA_CTRLREG_CLRINT); } /* transmits buffer through SGDMA. Returns number of buffers @@ -184,12 +179,11 @@ void sgdma_clear_txirq(struct altera_tse_private *priv) */ int sgdma_tx_buffer(struct altera_tse_private *priv, struct tse_buffer *buffer) { - int pktstx = 0; - struct sgdma_descrip *descbase = - (struct sgdma_descrip *)priv->tx_dma_desc; + struct sgdma_descrip __iomem *descbase = + (struct sgdma_descrip __iomem *)priv->tx_dma_desc; - struct sgdma_descrip *cdesc = &descbase[0]; - struct sgdma_descrip *ndesc = &descbase[1]; + struct sgdma_descrip __iomem *cdesc = &descbase[0]; + struct sgdma_descrip __iomem *ndesc = &descbase[1]; /* wait 'til the tx sgdma is ready for the next transmit request */ if (sgdma_txbusy(priv)) @@ -205,7 +199,7 @@ int sgdma_tx_buffer(struct altera_tse_private *priv, struct tse_buffer *buffer) 0, /* read fixed */ SGDMA_CONTROL_WR_FIXED); /* Generate SOP */ - pktstx = sgdma_async_write(priv, cdesc); + sgdma_async_write(priv, cdesc); /* enqueue the request to the pending transmit queue */ queue_tx(priv, buffer); @@ -219,10 +213,10 @@ int sgdma_tx_buffer(struct altera_tse_private *priv, struct tse_buffer *buffer) u32 sgdma_tx_completions(struct altera_tse_private *priv) { u32 ready = 0; - struct sgdma_descrip *desc = (struct sgdma_descrip *)priv->tx_dma_desc; if (!sgdma_txbusy(priv) && - ((desc->control & SGDMA_CONTROL_HW_OWNED) == 0) && + ((csrrd8(priv->tx_dma_desc, sgdma_descroffs(control)) + & SGDMA_CONTROL_HW_OWNED) == 0) && (dequeue_tx(priv))) { ready = 1; } @@ -246,32 +240,31 @@ void sgdma_add_rx_desc(struct altera_tse_private *priv, */ u32 sgdma_rx_status(struct altera_tse_private *priv) { - struct sgdma_csr *csr = (struct sgdma_csr *)priv->rx_dma_csr; - struct sgdma_descrip *base = (struct sgdma_descrip *)priv->rx_dma_desc; - struct sgdma_descrip *desc = NULL; - int pktsrx; - unsigned int rxstatus = 0; - unsigned int pktlength = 0; - unsigned int pktstatus = 0; + struct sgdma_descrip __iomem *base = + (struct sgdma_descrip __iomem *)priv->rx_dma_desc; + struct sgdma_descrip __iomem *desc = NULL; struct tse_buffer *rxbuffer = NULL; + unsigned int rxstatus = 0; - u32 sts = ioread32(&csr->status); + u32 sts = csrrd32(priv->rx_dma_csr, sgdma_csroffs(status)); desc = &base[0]; if (sts & SGDMA_STSREG_EOP) { + unsigned int pktlength = 0; + unsigned int pktstatus = 0; dma_sync_single_for_cpu(priv->device, priv->rxdescphys, priv->sgdmadesclen, DMA_FROM_DEVICE); - pktlength = desc->bytes_xferred; - pktstatus = desc->status & 0x3f; - rxstatus = pktstatus; + pktlength = csrrd16(desc, sgdma_descroffs(bytes_xferred)); + pktstatus = csrrd8(desc, sgdma_descroffs(status)); + rxstatus = pktstatus & ~SGDMA_STATUS_EOP; rxstatus = rxstatus << 16; rxstatus |= (pktlength & 0xffff); if (rxstatus) { - desc->status = 0; + csrwr8(0, desc, sgdma_descroffs(status)); rxbuffer = dequeue_rx(priv); if (rxbuffer == NULL) @@ -279,12 +272,12 @@ u32 sgdma_rx_status(struct altera_tse_private *priv) "sgdma rx and rx queue empty!\n"); /* Clear control */ - iowrite32(0, &csr->control); + csrwr32(0, priv->rx_dma_csr, sgdma_csroffs(control)); /* clear status */ - iowrite32(0xf, &csr->status); + csrwr32(0xf, priv->rx_dma_csr, sgdma_csroffs(status)); /* kick the rx sgdma after reaping this descriptor */ - pktsrx = sgdma_async_read(priv); + sgdma_async_read(priv); } else { /* If the SGDMA indicated an end of packet on recv, @@ -298,10 +291,11 @@ u32 sgdma_rx_status(struct altera_tse_private *priv) */ netdev_err(priv->dev, "SGDMA RX Error Info: %x, %x, %x\n", - sts, desc->status, rxstatus); + sts, csrrd8(desc, sgdma_descroffs(status)), + rxstatus); } } else if (sts == 0) { - pktsrx = sgdma_async_read(priv); + sgdma_async_read(priv); } return rxstatus; @@ -309,8 +303,8 @@ u32 sgdma_rx_status(struct altera_tse_private *priv) /* Private functions */ -static void sgdma_setup_descrip(struct sgdma_descrip *desc, - struct sgdma_descrip *ndesc, +static void sgdma_setup_descrip(struct sgdma_descrip __iomem *desc, + struct sgdma_descrip __iomem *ndesc, dma_addr_t ndesc_phys, dma_addr_t raddr, dma_addr_t waddr, @@ -320,27 +314,30 @@ static void sgdma_setup_descrip(struct sgdma_descrip *desc, int wfixed) { /* Clear the next descriptor as not owned by hardware */ - u32 ctrl = ndesc->control; + + u32 ctrl = csrrd8(ndesc, sgdma_descroffs(control)); ctrl &= ~SGDMA_CONTROL_HW_OWNED; - ndesc->control = ctrl; + csrwr8(ctrl, ndesc, sgdma_descroffs(control)); - ctrl = 0; ctrl = SGDMA_CONTROL_HW_OWNED; ctrl |= generate_eop; ctrl |= rfixed; ctrl |= wfixed; /* Channel is implicitly zero, initialized to 0 by default */ - - desc->raddr = raddr; - desc->waddr = waddr; - desc->next = lower_32_bits(ndesc_phys); - desc->control = ctrl; - desc->status = 0; - desc->rburst = 0; - desc->wburst = 0; - desc->bytes = length; - desc->bytes_xferred = 0; + csrwr32(lower_32_bits(raddr), desc, sgdma_descroffs(raddr)); + csrwr32(lower_32_bits(waddr), desc, sgdma_descroffs(waddr)); + + csrwr32(0, desc, sgdma_descroffs(pad1)); + csrwr32(0, desc, sgdma_descroffs(pad2)); + csrwr32(lower_32_bits(ndesc_phys), desc, sgdma_descroffs(next)); + + csrwr8(ctrl, desc, sgdma_descroffs(control)); + csrwr8(0, desc, sgdma_descroffs(status)); + csrwr8(0, desc, sgdma_descroffs(wburst)); + csrwr8(0, desc, sgdma_descroffs(rburst)); + csrwr16(length, desc, sgdma_descroffs(bytes)); + csrwr16(0, desc, sgdma_descroffs(bytes_xferred)); } /* If hardware is busy, don't restart async read. @@ -351,12 +348,11 @@ static void sgdma_setup_descrip(struct sgdma_descrip *desc, */ static int sgdma_async_read(struct altera_tse_private *priv) { - struct sgdma_csr *csr = (struct sgdma_csr *)priv->rx_dma_csr; - struct sgdma_descrip *descbase = - (struct sgdma_descrip *)priv->rx_dma_desc; + struct sgdma_descrip __iomem *descbase = + (struct sgdma_descrip __iomem *)priv->rx_dma_desc; - struct sgdma_descrip *cdesc = &descbase[0]; - struct sgdma_descrip *ndesc = &descbase[1]; + struct sgdma_descrip __iomem *cdesc = &descbase[0]; + struct sgdma_descrip __iomem *ndesc = &descbase[1]; struct tse_buffer *rxbuffer = NULL; @@ -382,11 +378,13 @@ static int sgdma_async_read(struct altera_tse_private *priv) priv->sgdmadesclen, DMA_TO_DEVICE); - iowrite32(lower_32_bits(sgdma_rxphysaddr(priv, cdesc)), - &csr->next_descrip); + csrwr32(lower_32_bits(sgdma_rxphysaddr(priv, cdesc)), + priv->rx_dma_csr, + sgdma_csroffs(next_descrip)); - iowrite32((priv->rxctrlreg | SGDMA_CTRLREG_START), - &csr->control); + csrwr32((priv->rxctrlreg | SGDMA_CTRLREG_START), + priv->rx_dma_csr, + sgdma_csroffs(control)); return 1; } @@ -395,32 +393,32 @@ static int sgdma_async_read(struct altera_tse_private *priv) } static int sgdma_async_write(struct altera_tse_private *priv, - struct sgdma_descrip *desc) + struct sgdma_descrip __iomem *desc) { - struct sgdma_csr *csr = (struct sgdma_csr *)priv->tx_dma_csr; - if (sgdma_txbusy(priv)) return 0; /* clear control and status */ - iowrite32(0, &csr->control); - iowrite32(0x1f, &csr->status); + csrwr32(0, priv->tx_dma_csr, sgdma_csroffs(control)); + csrwr32(0x1f, priv->tx_dma_csr, sgdma_csroffs(status)); dma_sync_single_for_device(priv->device, priv->txdescphys, priv->sgdmadesclen, DMA_TO_DEVICE); - iowrite32(lower_32_bits(sgdma_txphysaddr(priv, desc)), - &csr->next_descrip); + csrwr32(lower_32_bits(sgdma_txphysaddr(priv, desc)), + priv->tx_dma_csr, + sgdma_csroffs(next_descrip)); - iowrite32((priv->txctrlreg | SGDMA_CTRLREG_START), - &csr->control); + csrwr32((priv->txctrlreg | SGDMA_CTRLREG_START), + priv->tx_dma_csr, + sgdma_csroffs(control)); return 1; } static dma_addr_t sgdma_txphysaddr(struct altera_tse_private *priv, - struct sgdma_descrip *desc) + struct sgdma_descrip __iomem *desc) { dma_addr_t paddr = priv->txdescmem_busaddr; uintptr_t offs = (uintptr_t)desc - (uintptr_t)priv->tx_dma_desc; @@ -429,7 +427,7 @@ sgdma_txphysaddr(struct altera_tse_private *priv, static dma_addr_t sgdma_rxphysaddr(struct altera_tse_private *priv, - struct sgdma_descrip *desc) + struct sgdma_descrip __iomem *desc) { dma_addr_t paddr = priv->rxdescmem_busaddr; uintptr_t offs = (uintptr_t)desc - (uintptr_t)priv->rx_dma_desc; @@ -518,8 +516,8 @@ queue_rx_peekhead(struct altera_tse_private *priv) */ static int sgdma_rxbusy(struct altera_tse_private *priv) { - struct sgdma_csr *csr = (struct sgdma_csr *)priv->rx_dma_csr; - return ioread32(&csr->status) & SGDMA_STSREG_BUSY; + return csrrd32(priv->rx_dma_csr, sgdma_csroffs(status)) + & SGDMA_STSREG_BUSY; } /* waits for the tx sgdma to finish it's current operation, returns 0 @@ -528,13 +526,14 @@ static int sgdma_rxbusy(struct altera_tse_private *priv) static int sgdma_txbusy(struct altera_tse_private *priv) { int delay = 0; - struct sgdma_csr *csr = (struct sgdma_csr *)priv->tx_dma_csr; /* if DMA is busy, wait for current transactino to finish */ - while ((ioread32(&csr->status) & SGDMA_STSREG_BUSY) && (delay++ < 100)) + while ((csrrd32(priv->tx_dma_csr, sgdma_csroffs(status)) + & SGDMA_STSREG_BUSY) && (delay++ < 100)) udelay(1); - if (ioread32(&csr->status) & SGDMA_STSREG_BUSY) { + if (csrrd32(priv->tx_dma_csr, sgdma_csroffs(status)) + & SGDMA_STSREG_BUSY) { netdev_err(priv->dev, "timeout waiting for tx dma\n"); return 1; } diff --git a/drivers/net/ethernet/altera/altera_sgdmahw.h b/drivers/net/ethernet/altera/altera_sgdmahw.h index ba3334f35383..85bc33b218d9 100644 --- a/drivers/net/ethernet/altera/altera_sgdmahw.h +++ b/drivers/net/ethernet/altera/altera_sgdmahw.h @@ -19,16 +19,16 @@ /* SGDMA descriptor structure */ struct sgdma_descrip { - unsigned int raddr; /* address of data to be read */ - unsigned int pad1; - unsigned int waddr; - unsigned int pad2; - unsigned int next; - unsigned int pad3; - unsigned short bytes; - unsigned char rburst; - unsigned char wburst; - unsigned short bytes_xferred; /* 16 bits, bytes xferred */ + u32 raddr; /* address of data to be read */ + u32 pad1; + u32 waddr; + u32 pad2; + u32 next; + u32 pad3; + u16 bytes; + u8 rburst; + u8 wburst; + u16 bytes_xferred; /* 16 bits, bytes xferred */ /* bit 0: error * bit 1: length error @@ -39,7 +39,7 @@ struct sgdma_descrip { * bit 6: reserved * bit 7: status eop for recv case */ - unsigned char status; + u8 status; /* bit 0: eop * bit 1: read_fixed @@ -47,7 +47,7 @@ struct sgdma_descrip { * bits 3,4,5,6: Channel (always 0) * bit 7: hardware owned */ - unsigned char control; + u8 control; } __packed; @@ -101,6 +101,8 @@ struct sgdma_csr { u32 pad3[3]; }; +#define sgdma_csroffs(a) (offsetof(struct sgdma_csr, a)) +#define sgdma_descroffs(a) (offsetof(struct sgdma_descrip, a)) #define SGDMA_STSREG_ERR BIT(0) /* Error */ #define SGDMA_STSREG_EOP BIT(1) /* EOP */ diff --git a/drivers/net/ethernet/altera/altera_tse.h b/drivers/net/ethernet/altera/altera_tse.h index 465c4aabebbd..2adb24d4523c 100644 --- a/drivers/net/ethernet/altera/altera_tse.h +++ b/drivers/net/ethernet/altera/altera_tse.h @@ -357,6 +357,8 @@ struct altera_tse_mac { u32 reserved5[42]; }; +#define tse_csroffs(a) (offsetof(struct altera_tse_mac, a)) + /* Transmit and Receive Command Registers Bit Definitions */ #define ALTERA_TSE_TX_CMD_STAT_OMIT_CRC BIT(17) @@ -487,4 +489,49 @@ struct altera_tse_private { */ void altera_tse_set_ethtool_ops(struct net_device *); +static inline +u32 csrrd32(void __iomem *mac, size_t offs) +{ + void __iomem *paddr = (void __iomem *)((uintptr_t)mac + offs); + return readl(paddr); +} + +static inline +u16 csrrd16(void __iomem *mac, size_t offs) +{ + void __iomem *paddr = (void __iomem *)((uintptr_t)mac + offs); + return readw(paddr); +} + +static inline +u8 csrrd8(void __iomem *mac, size_t offs) +{ + void __iomem *paddr = (void __iomem *)((uintptr_t)mac + offs); + return readb(paddr); +} + +static inline +void csrwr32(u32 val, void __iomem *mac, size_t offs) +{ + void __iomem *paddr = (void __iomem *)((uintptr_t)mac + offs); + + writel(val, paddr); +} + +static inline +void csrwr16(u16 val, void __iomem *mac, size_t offs) +{ + void __iomem *paddr = (void __iomem *)((uintptr_t)mac + offs); + + writew(val, paddr); +} + +static inline +void csrwr8(u8 val, void __iomem *mac, size_t offs) +{ + void __iomem *paddr = (void __iomem *)((uintptr_t)mac + offs); + + writeb(val, paddr); +} + #endif /* __ALTERA_TSE_H__ */ diff --git a/drivers/net/ethernet/altera/altera_tse_ethtool.c b/drivers/net/ethernet/altera/altera_tse_ethtool.c index 76133caffa78..54c25eff7952 100644 --- a/drivers/net/ethernet/altera/altera_tse_ethtool.c +++ b/drivers/net/ethernet/altera/altera_tse_ethtool.c @@ -96,54 +96,89 @@ static void tse_fill_stats(struct net_device *dev, struct ethtool_stats *dummy, u64 *buf) { struct altera_tse_private *priv = netdev_priv(dev); - struct altera_tse_mac *mac = priv->mac_dev; u64 ext; - buf[0] = ioread32(&mac->frames_transmitted_ok); - buf[1] = ioread32(&mac->frames_received_ok); - buf[2] = ioread32(&mac->frames_check_sequence_errors); - buf[3] = ioread32(&mac->alignment_errors); + buf[0] = csrrd32(priv->mac_dev, + tse_csroffs(frames_transmitted_ok)); + buf[1] = csrrd32(priv->mac_dev, + tse_csroffs(frames_received_ok)); + buf[2] = csrrd32(priv->mac_dev, + tse_csroffs(frames_check_sequence_errors)); + buf[3] = csrrd32(priv->mac_dev, + tse_csroffs(alignment_errors)); /* Extended aOctetsTransmittedOK counter */ - ext = (u64) ioread32(&mac->msb_octets_transmitted_ok) << 32; - ext |= ioread32(&mac->octets_transmitted_ok); + ext = (u64) csrrd32(priv->mac_dev, + tse_csroffs(msb_octets_transmitted_ok)) << 32; + + ext |= csrrd32(priv->mac_dev, + tse_csroffs(octets_transmitted_ok)); buf[4] = ext; /* Extended aOctetsReceivedOK counter */ - ext = (u64) ioread32(&mac->msb_octets_received_ok) << 32; - ext |= ioread32(&mac->octets_received_ok); + ext = (u64) csrrd32(priv->mac_dev, + tse_csroffs(msb_octets_received_ok)) << 32; + + ext |= csrrd32(priv->mac_dev, + tse_csroffs(octets_received_ok)); buf[5] = ext; - buf[6] = ioread32(&mac->tx_pause_mac_ctrl_frames); - buf[7] = ioread32(&mac->rx_pause_mac_ctrl_frames); - buf[8] = ioread32(&mac->if_in_errors); - buf[9] = ioread32(&mac->if_out_errors); - buf[10] = ioread32(&mac->if_in_ucast_pkts); - buf[11] = ioread32(&mac->if_in_multicast_pkts); - buf[12] = ioread32(&mac->if_in_broadcast_pkts); - buf[13] = ioread32(&mac->if_out_discards); - buf[14] = ioread32(&mac->if_out_ucast_pkts); - buf[15] = ioread32(&mac->if_out_multicast_pkts); - buf[16] = ioread32(&mac->if_out_broadcast_pkts); - buf[17] = ioread32(&mac->ether_stats_drop_events); + buf[6] = csrrd32(priv->mac_dev, + tse_csroffs(tx_pause_mac_ctrl_frames)); + buf[7] = csrrd32(priv->mac_dev, + tse_csroffs(rx_pause_mac_ctrl_frames)); + buf[8] = csrrd32(priv->mac_dev, + tse_csroffs(if_in_errors)); + buf[9] = csrrd32(priv->mac_dev, + tse_csroffs(if_out_errors)); + buf[10] = csrrd32(priv->mac_dev, + tse_csroffs(if_in_ucast_pkts)); + buf[11] = csrrd32(priv->mac_dev, + tse_csroffs(if_in_multicast_pkts)); + buf[12] = csrrd32(priv->mac_dev, + tse_csroffs(if_in_broadcast_pkts)); + buf[13] = csrrd32(priv->mac_dev, + tse_csroffs(if_out_discards)); + buf[14] = csrrd32(priv->mac_dev, + tse_csroffs(if_out_ucast_pkts)); + buf[15] = csrrd32(priv->mac_dev, + tse_csroffs(if_out_multicast_pkts)); + buf[16] = csrrd32(priv->mac_dev, + tse_csroffs(if_out_broadcast_pkts)); + buf[17] = csrrd32(priv->mac_dev, + tse_csroffs(ether_stats_drop_events)); /* Extended etherStatsOctets counter */ - ext = (u64) ioread32(&mac->msb_ether_stats_octets) << 32; - ext |= ioread32(&mac->ether_stats_octets); + ext = (u64) csrrd32(priv->mac_dev, + tse_csroffs(msb_ether_stats_octets)) << 32; + ext |= csrrd32(priv->mac_dev, + tse_csroffs(ether_stats_octets)); buf[18] = ext; - buf[19] = ioread32(&mac->ether_stats_pkts); - buf[20] = ioread32(&mac->ether_stats_undersize_pkts); - buf[21] = ioread32(&mac->ether_stats_oversize_pkts); - buf[22] = ioread32(&mac->ether_stats_pkts_64_octets); - buf[23] = ioread32(&mac->ether_stats_pkts_65to127_octets); - buf[24] = ioread32(&mac->ether_stats_pkts_128to255_octets); - buf[25] = ioread32(&mac->ether_stats_pkts_256to511_octets); - buf[26] = ioread32(&mac->ether_stats_pkts_512to1023_octets); - buf[27] = ioread32(&mac->ether_stats_pkts_1024to1518_octets); - buf[28] = ioread32(&mac->ether_stats_pkts_1519tox_octets); - buf[29] = ioread32(&mac->ether_stats_jabbers); - buf[30] = ioread32(&mac->ether_stats_fragments); + buf[19] = csrrd32(priv->mac_dev, + tse_csroffs(ether_stats_pkts)); + buf[20] = csrrd32(priv->mac_dev, + tse_csroffs(ether_stats_undersize_pkts)); + buf[21] = csrrd32(priv->mac_dev, + tse_csroffs(ether_stats_oversize_pkts)); + buf[22] = csrrd32(priv->mac_dev, + tse_csroffs(ether_stats_pkts_64_octets)); + buf[23] = csrrd32(priv->mac_dev, + tse_csroffs(ether_stats_pkts_65to127_octets)); + buf[24] = csrrd32(priv->mac_dev, + tse_csroffs(ether_stats_pkts_128to255_octets)); + buf[25] = csrrd32(priv->mac_dev, + tse_csroffs(ether_stats_pkts_256to511_octets)); + buf[26] = csrrd32(priv->mac_dev, + tse_csroffs(ether_stats_pkts_512to1023_octets)); + buf[27] = csrrd32(priv->mac_dev, + tse_csroffs(ether_stats_pkts_1024to1518_octets)); + buf[28] = csrrd32(priv->mac_dev, + tse_csroffs(ether_stats_pkts_1519tox_octets)); + buf[29] = csrrd32(priv->mac_dev, + tse_csroffs(ether_stats_jabbers)); + buf[30] = csrrd32(priv->mac_dev, + tse_csroffs(ether_stats_fragments)); } static int tse_sset_count(struct net_device *dev, int sset) @@ -178,7 +213,6 @@ static void tse_get_regs(struct net_device *dev, struct ethtool_regs *regs, { int i; struct altera_tse_private *priv = netdev_priv(dev); - u32 *tse_mac_regs = (u32 *)priv->mac_dev; u32 *buf = regbuf; /* Set version to a known value, so ethtool knows @@ -196,7 +230,7 @@ static void tse_get_regs(struct net_device *dev, struct ethtool_regs *regs, regs->version = 1; for (i = 0; i < TSE_NUM_REGS; i++) - buf[i] = ioread32(&tse_mac_regs[i]); + buf[i] = csrrd32(priv->mac_dev, i * 4); } static int tse_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) diff --git a/drivers/net/ethernet/altera/altera_tse_main.c b/drivers/net/ethernet/altera/altera_tse_main.c index e44a4aeb9701..ecc3b4e4588b 100644 --- a/drivers/net/ethernet/altera/altera_tse_main.c +++ b/drivers/net/ethernet/altera/altera_tse_main.c @@ -100,29 +100,30 @@ static inline u32 tse_tx_avail(struct altera_tse_private *priv) */ static int altera_tse_mdio_read(struct mii_bus *bus, int mii_id, int regnum) { - struct altera_tse_mac *mac = (struct altera_tse_mac *)bus->priv; - unsigned int *mdio_regs = (unsigned int *)&mac->mdio_phy0; - u32 data; + struct net_device *ndev = bus->priv; + struct altera_tse_private *priv = netdev_priv(ndev); /* set MDIO address */ - iowrite32((mii_id & 0x1f), &mac->mdio_phy0_addr); + csrwr32((mii_id & 0x1f), priv->mac_dev, + tse_csroffs(mdio_phy0_addr)); /* get the data */ - data = ioread32(&mdio_regs[regnum]) & 0xffff; - return data; + return csrrd32(priv->mac_dev, + tse_csroffs(mdio_phy0) + regnum * 4) & 0xffff; } static int altera_tse_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value) { - struct altera_tse_mac *mac = (struct altera_tse_mac *)bus->priv; - unsigned int *mdio_regs = (unsigned int *)&mac->mdio_phy0; + struct net_device *ndev = bus->priv; + struct altera_tse_private *priv = netdev_priv(ndev); /* set MDIO address */ - iowrite32((mii_id & 0x1f), &mac->mdio_phy0_addr); + csrwr32((mii_id & 0x1f), priv->mac_dev, + tse_csroffs(mdio_phy0_addr)); /* write the data */ - iowrite32((u32) value, &mdio_regs[regnum]); + csrwr32(value, priv->mac_dev, tse_csroffs(mdio_phy0) + regnum * 4); return 0; } @@ -168,7 +169,7 @@ static int altera_tse_mdio_create(struct net_device *dev, unsigned int id) for (i = 0; i < PHY_MAX_ADDR; i++) mdio->irq[i] = PHY_POLL; - mdio->priv = priv->mac_dev; + mdio->priv = dev; mdio->parent = priv->device; ret = of_mdiobus_register(mdio, mdio_node); @@ -563,7 +564,6 @@ static int tse_start_xmit(struct sk_buff *skb, struct net_device *dev) unsigned int nopaged_len = skb_headlen(skb); enum netdev_tx ret = NETDEV_TX_OK; dma_addr_t dma_addr; - int txcomplete = 0; spin_lock_bh(&priv->tx_lock); @@ -599,7 +599,7 @@ static int tse_start_xmit(struct sk_buff *skb, struct net_device *dev) dma_sync_single_for_device(priv->device, buffer->dma_addr, buffer->len, DMA_TO_DEVICE); - txcomplete = priv->dmaops->tx_buffer(priv, buffer); + priv->dmaops->tx_buffer(priv, buffer); skb_tx_timestamp(skb); @@ -698,7 +698,6 @@ static struct phy_device *connect_local_phy(struct net_device *dev) struct altera_tse_private *priv = netdev_priv(dev); struct phy_device *phydev = NULL; char phy_id_fmt[MII_BUS_ID_SIZE + 3]; - int ret; if (priv->phy_addr != POLL_PHY) { snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, @@ -712,6 +711,7 @@ static struct phy_device *connect_local_phy(struct net_device *dev) netdev_err(dev, "Could not attach to PHY\n"); } else { + int ret; phydev = phy_find_first(priv->mdio); if (phydev == NULL) { netdev_err(dev, "No PHY found\n"); @@ -791,7 +791,6 @@ static int init_phy(struct net_device *dev) static void tse_update_mac_addr(struct altera_tse_private *priv, u8 *addr) { - struct altera_tse_mac *mac = priv->mac_dev; u32 msb; u32 lsb; @@ -799,8 +798,8 @@ static void tse_update_mac_addr(struct altera_tse_private *priv, u8 *addr) lsb = ((addr[5] << 8) | addr[4]) & 0xffff; /* Set primary MAC address */ - iowrite32(msb, &mac->mac_addr_0); - iowrite32(lsb, &mac->mac_addr_1); + csrwr32(msb, priv->mac_dev, tse_csroffs(mac_addr_0)); + csrwr32(lsb, priv->mac_dev, tse_csroffs(mac_addr_1)); } /* MAC software reset. @@ -811,26 +810,26 @@ static void tse_update_mac_addr(struct altera_tse_private *priv, u8 *addr) */ static int reset_mac(struct altera_tse_private *priv) { - void __iomem *cmd_cfg_reg = &priv->mac_dev->command_config; int counter; u32 dat; - dat = ioread32(cmd_cfg_reg); + dat = csrrd32(priv->mac_dev, tse_csroffs(command_config)); dat &= ~(MAC_CMDCFG_TX_ENA | MAC_CMDCFG_RX_ENA); dat |= MAC_CMDCFG_SW_RESET | MAC_CMDCFG_CNT_RESET; - iowrite32(dat, cmd_cfg_reg); + csrwr32(dat, priv->mac_dev, tse_csroffs(command_config)); counter = 0; while (counter++ < ALTERA_TSE_SW_RESET_WATCHDOG_CNTR) { - if (tse_bit_is_clear(cmd_cfg_reg, MAC_CMDCFG_SW_RESET)) + if (tse_bit_is_clear(priv->mac_dev, tse_csroffs(command_config), + MAC_CMDCFG_SW_RESET)) break; udelay(1); } if (counter >= ALTERA_TSE_SW_RESET_WATCHDOG_CNTR) { - dat = ioread32(cmd_cfg_reg); + dat = csrrd32(priv->mac_dev, tse_csroffs(command_config)); dat &= ~MAC_CMDCFG_SW_RESET; - iowrite32(dat, cmd_cfg_reg); + csrwr32(dat, priv->mac_dev, tse_csroffs(command_config)); return -1; } return 0; @@ -840,41 +839,57 @@ static int reset_mac(struct altera_tse_private *priv) */ static int init_mac(struct altera_tse_private *priv) { - struct altera_tse_mac *mac = priv->mac_dev; unsigned int cmd = 0; u32 frm_length; /* Setup Rx FIFO */ - iowrite32(priv->rx_fifo_depth - ALTERA_TSE_RX_SECTION_EMPTY, - &mac->rx_section_empty); - iowrite32(ALTERA_TSE_RX_SECTION_FULL, &mac->rx_section_full); - iowrite32(ALTERA_TSE_RX_ALMOST_EMPTY, &mac->rx_almost_empty); - iowrite32(ALTERA_TSE_RX_ALMOST_FULL, &mac->rx_almost_full); + csrwr32(priv->rx_fifo_depth - ALTERA_TSE_RX_SECTION_EMPTY, + priv->mac_dev, tse_csroffs(rx_section_empty)); + + csrwr32(ALTERA_TSE_RX_SECTION_FULL, priv->mac_dev, + tse_csroffs(rx_section_full)); + + csrwr32(ALTERA_TSE_RX_ALMOST_EMPTY, priv->mac_dev, + tse_csroffs(rx_almost_empty)); + + csrwr32(ALTERA_TSE_RX_ALMOST_FULL, priv->mac_dev, + tse_csroffs(rx_almost_full)); /* Setup Tx FIFO */ - iowrite32(priv->tx_fifo_depth - ALTERA_TSE_TX_SECTION_EMPTY, - &mac->tx_section_empty); - iowrite32(ALTERA_TSE_TX_SECTION_FULL, &mac->tx_section_full); - iowrite32(ALTERA_TSE_TX_ALMOST_EMPTY, &mac->tx_almost_empty); - iowrite32(ALTERA_TSE_TX_ALMOST_FULL, &mac->tx_almost_full); + csrwr32(priv->tx_fifo_depth - ALTERA_TSE_TX_SECTION_EMPTY, + priv->mac_dev, tse_csroffs(tx_section_empty)); + + csrwr32(ALTERA_TSE_TX_SECTION_FULL, priv->mac_dev, + tse_csroffs(tx_section_full)); + + csrwr32(ALTERA_TSE_TX_ALMOST_EMPTY, priv->mac_dev, + tse_csroffs(tx_almost_empty)); + + csrwr32(ALTERA_TSE_TX_ALMOST_FULL, priv->mac_dev, + tse_csroffs(tx_almost_full)); /* MAC Address Configuration */ tse_update_mac_addr(priv, priv->dev->dev_addr); /* MAC Function Configuration */ frm_length = ETH_HLEN + priv->dev->mtu + ETH_FCS_LEN; - iowrite32(frm_length, &mac->frm_length); - iowrite32(ALTERA_TSE_TX_IPG_LENGTH, &mac->tx_ipg_length); + csrwr32(frm_length, priv->mac_dev, tse_csroffs(frm_length)); + + csrwr32(ALTERA_TSE_TX_IPG_LENGTH, priv->mac_dev, + tse_csroffs(tx_ipg_length)); /* Disable RX/TX shift 16 for alignment of all received frames on 16-bit * start address */ - tse_set_bit(&mac->rx_cmd_stat, ALTERA_TSE_RX_CMD_STAT_RX_SHIFT16); - tse_clear_bit(&mac->tx_cmd_stat, ALTERA_TSE_TX_CMD_STAT_TX_SHIFT16 | - ALTERA_TSE_TX_CMD_STAT_OMIT_CRC); + tse_set_bit(priv->mac_dev, tse_csroffs(rx_cmd_stat), + ALTERA_TSE_RX_CMD_STAT_RX_SHIFT16); + + tse_clear_bit(priv->mac_dev, tse_csroffs(tx_cmd_stat), + ALTERA_TSE_TX_CMD_STAT_TX_SHIFT16 | + ALTERA_TSE_TX_CMD_STAT_OMIT_CRC); /* Set the MAC options */ - cmd = ioread32(&mac->command_config); + cmd = csrrd32(priv->mac_dev, tse_csroffs(command_config)); cmd &= ~MAC_CMDCFG_PAD_EN; /* No padding Removal on Receive */ cmd &= ~MAC_CMDCFG_CRC_FWD; /* CRC Removal */ cmd |= MAC_CMDCFG_RX_ERR_DISC; /* Automatically discard frames @@ -889,9 +904,10 @@ static int init_mac(struct altera_tse_private *priv) cmd &= ~MAC_CMDCFG_ETH_SPEED; cmd &= ~MAC_CMDCFG_ENA_10; - iowrite32(cmd, &mac->command_config); + csrwr32(cmd, priv->mac_dev, tse_csroffs(command_config)); - iowrite32(ALTERA_TSE_PAUSE_QUANTA, &mac->pause_quanta); + csrwr32(ALTERA_TSE_PAUSE_QUANTA, priv->mac_dev, + tse_csroffs(pause_quanta)); if (netif_msg_hw(priv)) dev_dbg(priv->device, @@ -904,15 +920,14 @@ static int init_mac(struct altera_tse_private *priv) */ static void tse_set_mac(struct altera_tse_private *priv, bool enable) { - struct altera_tse_mac *mac = priv->mac_dev; - u32 value = ioread32(&mac->command_config); + u32 value = csrrd32(priv->mac_dev, tse_csroffs(command_config)); if (enable) value |= MAC_CMDCFG_TX_ENA | MAC_CMDCFG_RX_ENA; else value &= ~(MAC_CMDCFG_TX_ENA | MAC_CMDCFG_RX_ENA); - iowrite32(value, &mac->command_config); + csrwr32(value, priv->mac_dev, tse_csroffs(command_config)); } /* Change the MTU @@ -942,13 +957,12 @@ static int tse_change_mtu(struct net_device *dev, int new_mtu) static void altera_tse_set_mcfilter(struct net_device *dev) { struct altera_tse_private *priv = netdev_priv(dev); - struct altera_tse_mac *mac = priv->mac_dev; int i; struct netdev_hw_addr *ha; /* clear the hash filter */ for (i = 0; i < 64; i++) - iowrite32(0, &(mac->hash_table[i])); + csrwr32(0, priv->mac_dev, tse_csroffs(hash_table) + i * 4); netdev_for_each_mc_addr(ha, dev) { unsigned int hash = 0; @@ -964,7 +978,7 @@ static void altera_tse_set_mcfilter(struct net_device *dev) hash = (hash << 1) | xor_bit; } - iowrite32(1, &(mac->hash_table[hash])); + csrwr32(1, priv->mac_dev, tse_csroffs(hash_table) + hash * 4); } } @@ -972,12 +986,11 @@ static void altera_tse_set_mcfilter(struct net_device *dev) static void altera_tse_set_mcfilterall(struct net_device *dev) { struct altera_tse_private *priv = netdev_priv(dev); - struct altera_tse_mac *mac = priv->mac_dev; int i; /* set the hash filter */ for (i = 0; i < 64; i++) - iowrite32(1, &(mac->hash_table[i])); + csrwr32(1, priv->mac_dev, tse_csroffs(hash_table) + i * 4); } /* Set or clear the multicast filter for this adaptor @@ -985,12 +998,12 @@ static void altera_tse_set_mcfilterall(struct net_device *dev) static void tse_set_rx_mode_hashfilter(struct net_device *dev) { struct altera_tse_private *priv = netdev_priv(dev); - struct altera_tse_mac *mac = priv->mac_dev; spin_lock(&priv->mac_cfg_lock); if (dev->flags & IFF_PROMISC) - tse_set_bit(&mac->command_config, MAC_CMDCFG_PROMIS_EN); + tse_set_bit(priv->mac_dev, tse_csroffs(command_config), + MAC_CMDCFG_PROMIS_EN); if (dev->flags & IFF_ALLMULTI) altera_tse_set_mcfilterall(dev); @@ -1005,15 +1018,16 @@ static void tse_set_rx_mode_hashfilter(struct net_device *dev) static void tse_set_rx_mode(struct net_device *dev) { struct altera_tse_private *priv = netdev_priv(dev); - struct altera_tse_mac *mac = priv->mac_dev; spin_lock(&priv->mac_cfg_lock); if ((dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI) || !netdev_mc_empty(dev) || !netdev_uc_empty(dev)) - tse_set_bit(&mac->command_config, MAC_CMDCFG_PROMIS_EN); + tse_set_bit(priv->mac_dev, tse_csroffs(command_config), + MAC_CMDCFG_PROMIS_EN); else - tse_clear_bit(&mac->command_config, MAC_CMDCFG_PROMIS_EN); + tse_clear_bit(priv->mac_dev, tse_csroffs(command_config), + MAC_CMDCFG_PROMIS_EN); spin_unlock(&priv->mac_cfg_lock); } @@ -1493,7 +1507,7 @@ static int altera_tse_remove(struct platform_device *pdev) return 0; } -struct altera_dmaops altera_dtype_sgdma = { +static const struct altera_dmaops altera_dtype_sgdma = { .altera_dtype = ALTERA_DTYPE_SGDMA, .dmamask = 32, .reset_dma = sgdma_reset, @@ -1512,7 +1526,7 @@ struct altera_dmaops altera_dtype_sgdma = { .start_rxdma = sgdma_start_rxdma, }; -struct altera_dmaops altera_dtype_msgdma = { +static const struct altera_dmaops altera_dtype_msgdma = { .altera_dtype = ALTERA_DTYPE_MSGDMA, .dmamask = 64, .reset_dma = msgdma_reset, diff --git a/drivers/net/ethernet/altera/altera_utils.c b/drivers/net/ethernet/altera/altera_utils.c index 70fa13f486b2..d7eeb1713ad2 100644 --- a/drivers/net/ethernet/altera/altera_utils.c +++ b/drivers/net/ethernet/altera/altera_utils.c @@ -17,28 +17,28 @@ #include "altera_tse.h" #include "altera_utils.h" -void tse_set_bit(void __iomem *ioaddr, u32 bit_mask) +void tse_set_bit(void __iomem *ioaddr, size_t offs, u32 bit_mask) { - u32 value = ioread32(ioaddr); + u32 value = csrrd32(ioaddr, offs); value |= bit_mask; - iowrite32(value, ioaddr); + csrwr32(value, ioaddr, offs); } -void tse_clear_bit(void __iomem *ioaddr, u32 bit_mask) +void tse_clear_bit(void __iomem *ioaddr, size_t offs, u32 bit_mask) { - u32 value = ioread32(ioaddr); + u32 value = csrrd32(ioaddr, offs); value &= ~bit_mask; - iowrite32(value, ioaddr); + csrwr32(value, ioaddr, offs); } -int tse_bit_is_set(void __iomem *ioaddr, u32 bit_mask) +int tse_bit_is_set(void __iomem *ioaddr, size_t offs, u32 bit_mask) { - u32 value = ioread32(ioaddr); + u32 value = csrrd32(ioaddr, offs); return (value & bit_mask) ? 1 : 0; } -int tse_bit_is_clear(void __iomem *ioaddr, u32 bit_mask) +int tse_bit_is_clear(void __iomem *ioaddr, size_t offs, u32 bit_mask) { - u32 value = ioread32(ioaddr); + u32 value = csrrd32(ioaddr, offs); return (value & bit_mask) ? 0 : 1; } diff --git a/drivers/net/ethernet/altera/altera_utils.h b/drivers/net/ethernet/altera/altera_utils.h index ce1db36d3583..baf100ccf587 100644 --- a/drivers/net/ethernet/altera/altera_utils.h +++ b/drivers/net/ethernet/altera/altera_utils.h @@ -19,9 +19,9 @@ #ifndef __ALTERA_UTILS_H__ #define __ALTERA_UTILS_H__ -void tse_set_bit(void __iomem *ioaddr, u32 bit_mask); -void tse_clear_bit(void __iomem *ioaddr, u32 bit_mask); -int tse_bit_is_set(void __iomem *ioaddr, u32 bit_mask); -int tse_bit_is_clear(void __iomem *ioaddr, u32 bit_mask); +void tse_set_bit(void __iomem *ioaddr, size_t offs, u32 bit_mask); +void tse_clear_bit(void __iomem *ioaddr, size_t offs, u32 bit_mask); +int tse_bit_is_set(void __iomem *ioaddr, size_t offs, u32 bit_mask); +int tse_bit_is_clear(void __iomem *ioaddr, size_t offs, u32 bit_mask); #endif /* __ALTERA_UTILS_H__*/ -- cgit v1.2.3 From d91e5c02555ae838e9d783b9e83e125fd10dca73 Mon Sep 17 00:00:00 2001 From: Vince Bridgers Date: Wed, 14 May 2014 14:38:37 -0500 Subject: Altera TSE: Disable Multicast filtering to workaround problem This patch disables multicast hash filtering if present in the hardware and uses promiscuous mode instead until the problem with multicast filtering has been debugged, integrated and tested. Signed-off-by: Vince Bridgers Signed-off-by: David S. Miller --- drivers/net/ethernet/altera/altera_tse_main.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/altera/altera_tse_main.c b/drivers/net/ethernet/altera/altera_tse_main.c index ecc3b4e4588b..7330681574d2 100644 --- a/drivers/net/ethernet/altera/altera_tse_main.c +++ b/drivers/net/ethernet/altera/altera_tse_main.c @@ -1376,6 +1376,11 @@ static int altera_tse_probe(struct platform_device *pdev) of_property_read_bool(pdev->dev.of_node, "altr,has-hash-multicast-filter"); + /* Set hash filter to not set for now until the + * multicast filter receive issue is debugged + */ + priv->hash_filter = 0; + /* get supplemental address settings for this instance */ priv->added_unicast = of_property_read_bool(pdev->dev.of_node, -- cgit v1.2.3 From b394745df2d9d4c30bf1bcc55773bec6f3bc7c67 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 14 May 2014 13:12:49 -0700 Subject: net: phy: Don't call phy_resume if phy_init_hw failed After the call to phy_init_hw failed in phy_attach_direct, phy_detach is called to detach the phy device from its network device. If the attached driver is a generic phy driver, this also detaches the driver. Subsequently phy_resume is called, which assumes without checking that a driver is attached to the device. This will result in a crash such as Unable to handle kernel paging request for data at address 0xffffffffffffff90 Faulting instruction address: 0xc0000000003a0e18 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c0000000003a0e18] .phy_attach_direct+0x68/0x17c LR [c0000000003a0e6c] .phy_attach_direct+0xbc/0x17c Call Trace: [c0000003fc0475d0] [c0000000003a0e6c] .phy_attach_direct+0xbc/0x17c (unreliable) [c0000003fc047670] [c0000000003a0ff8] .phy_connect_direct+0x28/0x98 [c0000003fc047700] [c0000000003f0074] .of_phy_connect+0x4c/0xa4 Only call phy_resume if phy_init_hw was successful. Signed-off-by: Guenter Roeck Acked-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/phy_device.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 0ce606624296..4987a1c6dc52 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -614,8 +614,8 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, err = phy_init_hw(phydev); if (err) phy_detach(phydev); - - phy_resume(phydev); + else + phy_resume(phydev); return err; } -- cgit v1.2.3 From 583757446ba6850eff96cef6565d729266da9c5b Mon Sep 17 00:00:00 2001 From: Zoltan Kiss Date: Thu, 15 May 2014 11:08:34 +0100 Subject: xen-netback: Fix grant ref resolution in RX path The original series for reintroducing grant mapping for netback had a patch [1] to handle receiving of packets from an another VIF. Grant copy on the receiving side needs the grant ref of the page to set up the op. The original patch assumed (wrongly) that the frags array haven't changed. In the case reported by Sander, the sending guest sent a packet where the linear buffer and the first frag were under PKT_PROT_LEN (=128) bytes. xenvif_tx_submit() then pulled up the linear area to 128 bytes, and ditched the first frag. The receiving side had an off-by-one problem when gathered the grant refs. This patch fixes that by checking whether the actual frag's page pointer is the same as the page in the original frag list. It can handle any kind of changes on the original frags array, like: - removing granted frags from the array at any point - adding local pages to the frags list anywhere - reordering the frags It's optimized to the most common case, when there is 1:1 relation between the frags and the list, plus works optimal when frags are removed from the end or the beginning. [1]: 3e2234: xen-netback: Handle foreign mapped pages on the guest RX path Reported-by: Sander Eikelenboom Signed-off-by: Zoltan Kiss Acked-by: Ian Campbell Signed-off-by: David S. Miller --- drivers/net/xen-netback/netback.c | 98 ++++++++++++++++++++++++++++++++------- 1 file changed, 80 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c index 76665405c5aa..64ab1d141f1c 100644 --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -104,7 +104,7 @@ static inline unsigned long idx_to_kaddr(struct xenvif *vif, /* Find the containing VIF's structure from a pointer in pending_tx_info array */ -static inline struct xenvif* ubuf_to_vif(struct ubuf_info *ubuf) +static inline struct xenvif *ubuf_to_vif(const struct ubuf_info *ubuf) { u16 pending_idx = ubuf->desc; struct pending_tx_info *temp = @@ -322,6 +322,35 @@ static void xenvif_gop_frag_copy(struct xenvif *vif, struct sk_buff *skb, } } +/* + * Find the grant ref for a given frag in a chain of struct ubuf_info's + * skb: the skb itself + * i: the frag's number + * ubuf: a pointer to an element in the chain. It should not be NULL + * + * Returns a pointer to the element in the chain where the page were found. If + * not found, returns NULL. + * See the definition of callback_struct in common.h for more details about + * the chain. + */ +static const struct ubuf_info *xenvif_find_gref(const struct sk_buff *const skb, + const int i, + const struct ubuf_info *ubuf) +{ + struct xenvif *foreign_vif = ubuf_to_vif(ubuf); + + do { + u16 pending_idx = ubuf->desc; + + if (skb_shinfo(skb)->frags[i].page.p == + foreign_vif->mmap_pages[pending_idx]) + break; + ubuf = (struct ubuf_info *) ubuf->ctx; + } while (ubuf); + + return ubuf; +} + /* * Prepare an SKB to be transmitted to the frontend. * @@ -346,9 +375,8 @@ static int xenvif_gop_skb(struct sk_buff *skb, int head = 1; int old_meta_prod; int gso_type; - struct ubuf_info *ubuf = skb_shinfo(skb)->destructor_arg; - grant_ref_t foreign_grefs[MAX_SKB_FRAGS]; - struct xenvif *foreign_vif = NULL; + const struct ubuf_info *ubuf = skb_shinfo(skb)->destructor_arg; + const struct ubuf_info *const head_ubuf = ubuf; old_meta_prod = npo->meta_prod; @@ -386,19 +414,6 @@ static int xenvif_gop_skb(struct sk_buff *skb, npo->copy_off = 0; npo->copy_gref = req->gref; - if ((skb_shinfo(skb)->tx_flags & SKBTX_DEV_ZEROCOPY) && - (ubuf->callback == &xenvif_zerocopy_callback)) { - int i = 0; - foreign_vif = ubuf_to_vif(ubuf); - - do { - u16 pending_idx = ubuf->desc; - foreign_grefs[i++] = - foreign_vif->pending_tx_info[pending_idx].req.gref; - ubuf = (struct ubuf_info *) ubuf->ctx; - } while (ubuf); - } - data = skb->data; while (data < skb_tail_pointer(skb)) { unsigned int offset = offset_in_page(data); @@ -415,13 +430,60 @@ static int xenvif_gop_skb(struct sk_buff *skb, } for (i = 0; i < nr_frags; i++) { + /* This variable also signals whether foreign_gref has a real + * value or not. + */ + struct xenvif *foreign_vif = NULL; + grant_ref_t foreign_gref; + + if ((skb_shinfo(skb)->tx_flags & SKBTX_DEV_ZEROCOPY) && + (ubuf->callback == &xenvif_zerocopy_callback)) { + const struct ubuf_info *const startpoint = ubuf; + + /* Ideally ubuf points to the chain element which + * belongs to this frag. Or if frags were removed from + * the beginning, then shortly before it. + */ + ubuf = xenvif_find_gref(skb, i, ubuf); + + /* Try again from the beginning of the list, if we + * haven't tried from there. This only makes sense in + * the unlikely event of reordering the original frags. + * For injected local pages it's an unnecessary second + * run. + */ + if (unlikely(!ubuf) && startpoint != head_ubuf) + ubuf = xenvif_find_gref(skb, i, head_ubuf); + + if (likely(ubuf)) { + u16 pending_idx = ubuf->desc; + + foreign_vif = ubuf_to_vif(ubuf); + foreign_gref = foreign_vif->pending_tx_info[pending_idx].req.gref; + /* Just a safety measure. If this was the last + * element on the list, the for loop will + * iterate again if a local page were added to + * the end. Using head_ubuf here prevents the + * second search on the chain. Or the original + * frags changed order, but that's less likely. + * In any way, ubuf shouldn't be NULL. + */ + ubuf = ubuf->ctx ? + (struct ubuf_info *) ubuf->ctx : + head_ubuf; + } else + /* This frag was a local page, added to the + * array after the skb left netback. + */ + ubuf = head_ubuf; + } xenvif_gop_frag_copy(vif, skb, npo, skb_frag_page(&skb_shinfo(skb)->frags[i]), skb_frag_size(&skb_shinfo(skb)->frags[i]), skb_shinfo(skb)->frags[i].page_offset, &head, foreign_vif, - foreign_grefs[i]); + foreign_vif ? foreign_gref : UINT_MAX); } return npo->meta_prod - old_meta_prod; -- cgit v1.2.3 From 81c708068dfedece038e07d818ba68333d8d885d Mon Sep 17 00:00:00 2001 From: Nikolay Aleksandrov Date: Thu, 15 May 2014 13:35:23 +0200 Subject: bonding: fix out of range parameters for bond_intmax_tbl I've missed to add a NULL entry to the bond_intmax_tbl when I introduced it with the conversion of arp_interval so add it now. CC: Jay Vosburgh CC: Veaceslav Falico CC: Andy Gospodarek Fixes: 7bdb04ed0dbf ("bonding: convert arp_interval to use the new option API") Signed-off-by: Nikolay Aleksandrov Acked-by: Veaceslav Falico Signed-off-by: David S. Miller --- drivers/net/bonding/bond_options.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_options.c b/drivers/net/bonding/bond_options.c index 724e30fa20b9..832070298446 100644 --- a/drivers/net/bonding/bond_options.c +++ b/drivers/net/bonding/bond_options.c @@ -125,6 +125,7 @@ static const struct bond_opt_value bond_fail_over_mac_tbl[] = { static const struct bond_opt_value bond_intmax_tbl[] = { { "off", 0, BOND_VALFLAG_DEFAULT}, { "maxval", INT_MAX, BOND_VALFLAG_MAX}, + { NULL, -1, 0} }; static const struct bond_opt_value bond_lacp_rate_tbl[] = { -- cgit v1.2.3 From ce8d9e0d6746ff67c1870386b7121a4448f21130 Mon Sep 17 00:00:00 2001 From: Matan Barak Date: Thu, 15 May 2014 15:29:27 +0300 Subject: net/mlx4_core: Add UPDATE_QP SRIOV wrapper support This patch adds UPDATE_QP SRIOV wrapper support. The mechanism is a general one, but currently only source MAC index changes are allowed for VFs. Signed-off-by: Matan Barak Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/cmd.c | 4 +- drivers/net/ethernet/mellanox/mlx4/mlx4.h | 6 +++ drivers/net/ethernet/mellanox/mlx4/qp.c | 35 ++++++++++++++ .../net/ethernet/mellanox/mlx4/resource_tracker.c | 54 ++++++++++++++++++++++ 4 files changed, 97 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/cmd.c b/drivers/net/ethernet/mellanox/mlx4/cmd.c index 78099eab7673..92d3249f63f1 100644 --- a/drivers/net/ethernet/mellanox/mlx4/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c @@ -1253,12 +1253,12 @@ static struct mlx4_cmd_info cmd_info[] = { }, { .opcode = MLX4_CMD_UPDATE_QP, - .has_inbox = false, + .has_inbox = true, .has_outbox = false, .out_is_imm = false, .encode_slave_id = false, .verify = NULL, - .wrapper = mlx4_CMD_EPERM_wrapper + .wrapper = mlx4_UPDATE_QP_wrapper }, { .opcode = MLX4_CMD_GET_OP_REQ, diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4.h b/drivers/net/ethernet/mellanox/mlx4/mlx4.h index f9c465101963..212cea440f90 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4.h @@ -1195,6 +1195,12 @@ int mlx4_QP_ATTACH_wrapper(struct mlx4_dev *dev, int slave, struct mlx4_cmd_mailbox *outbox, struct mlx4_cmd_info *cmd); +int mlx4_UPDATE_QP_wrapper(struct mlx4_dev *dev, int slave, + struct mlx4_vhcr *vhcr, + struct mlx4_cmd_mailbox *inbox, + struct mlx4_cmd_mailbox *outbox, + struct mlx4_cmd_info *cmd); + int mlx4_PROMISC_wrapper(struct mlx4_dev *dev, int slave, struct mlx4_vhcr *vhcr, struct mlx4_cmd_mailbox *inbox, diff --git a/drivers/net/ethernet/mellanox/mlx4/qp.c b/drivers/net/ethernet/mellanox/mlx4/qp.c index 61d64ebffd56..fbd32af89c7c 100644 --- a/drivers/net/ethernet/mellanox/mlx4/qp.c +++ b/drivers/net/ethernet/mellanox/mlx4/qp.c @@ -389,6 +389,41 @@ err_icm: EXPORT_SYMBOL_GPL(mlx4_qp_alloc); +#define MLX4_UPDATE_QP_SUPPORTED_ATTRS MLX4_UPDATE_QP_SMAC +int mlx4_update_qp(struct mlx4_dev *dev, struct mlx4_qp *qp, + enum mlx4_update_qp_attr attr, + struct mlx4_update_qp_params *params) +{ + struct mlx4_cmd_mailbox *mailbox; + struct mlx4_update_qp_context *cmd; + u64 pri_addr_path_mask = 0; + int err = 0; + + mailbox = mlx4_alloc_cmd_mailbox(dev); + if (IS_ERR(mailbox)) + return PTR_ERR(mailbox); + + cmd = (struct mlx4_update_qp_context *)mailbox->buf; + + if (!attr || (attr & ~MLX4_UPDATE_QP_SUPPORTED_ATTRS)) + return -EINVAL; + + if (attr & MLX4_UPDATE_QP_SMAC) { + pri_addr_path_mask |= 1ULL << MLX4_UPD_QP_PATH_MASK_MAC_INDEX; + cmd->qp_context.pri_path.grh_mylmc = params->smac_index; + } + + cmd->primary_addr_path_mask = cpu_to_be64(pri_addr_path_mask); + + err = mlx4_cmd(dev, mailbox->dma, qp->qpn & 0xffffff, 0, + MLX4_CMD_UPDATE_QP, MLX4_CMD_TIME_CLASS_A, + MLX4_CMD_NATIVE); + + mlx4_free_cmd_mailbox(dev, mailbox); + return err; +} +EXPORT_SYMBOL_GPL(mlx4_update_qp); + void mlx4_qp_remove(struct mlx4_dev *dev, struct mlx4_qp *qp) { struct mlx4_qp_table *qp_table = &mlx4_priv(dev)->qp_table; diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c index 1c3fdd4a1f7d..8f1254a79832 100644 --- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c +++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c @@ -3895,6 +3895,60 @@ static int add_eth_header(struct mlx4_dev *dev, int slave, } +#define MLX4_UPD_QP_PATH_MASK_SUPPORTED (1ULL << MLX4_UPD_QP_PATH_MASK_MAC_INDEX) +int mlx4_UPDATE_QP_wrapper(struct mlx4_dev *dev, int slave, + struct mlx4_vhcr *vhcr, + struct mlx4_cmd_mailbox *inbox, + struct mlx4_cmd_mailbox *outbox, + struct mlx4_cmd_info *cmd_info) +{ + int err; + u32 qpn = vhcr->in_modifier & 0xffffff; + struct res_qp *rqp; + u64 mac; + unsigned port; + u64 pri_addr_path_mask; + struct mlx4_update_qp_context *cmd; + int smac_index; + + cmd = (struct mlx4_update_qp_context *)inbox->buf; + + pri_addr_path_mask = be64_to_cpu(cmd->primary_addr_path_mask); + if (cmd->qp_mask || cmd->secondary_addr_path_mask || + (pri_addr_path_mask & ~MLX4_UPD_QP_PATH_MASK_SUPPORTED)) + return -EPERM; + + /* Just change the smac for the QP */ + err = get_res(dev, slave, qpn, RES_QP, &rqp); + if (err) { + mlx4_err(dev, "Updating qpn 0x%x for slave %d rejected\n", qpn, slave); + return err; + } + + port = (rqp->sched_queue >> 6 & 1) + 1; + smac_index = cmd->qp_context.pri_path.grh_mylmc; + err = mac_find_smac_ix_in_slave(dev, slave, port, + smac_index, &mac); + if (err) { + mlx4_err(dev, "Failed to update qpn 0x%x, MAC is invalid. smac_ix: %d\n", + qpn, smac_index); + goto err_mac; + } + + err = mlx4_cmd(dev, inbox->dma, + vhcr->in_modifier, 0, + MLX4_CMD_UPDATE_QP, MLX4_CMD_TIME_CLASS_A, + MLX4_CMD_NATIVE); + if (err) { + mlx4_err(dev, "Failed to update qpn on qpn 0x%x, command failed\n", qpn); + goto err_mac; + } + +err_mac: + put_res(dev, slave, qpn, RES_QP); + return err; +} + int mlx4_QP_FLOW_STEERING_ATTACH_wrapper(struct mlx4_dev *dev, int slave, struct mlx4_vhcr *vhcr, struct mlx4_cmd_mailbox *inbox, -- cgit v1.2.3 From 9433c188915c1383ee36259119bc3a9c6f98cfc3 Mon Sep 17 00:00:00 2001 From: Matan Barak Date: Thu, 15 May 2014 15:29:28 +0300 Subject: IB/mlx4: Invoke UPDATE_QP for proxy QP1 on MAC changes When we receive a netdev event indicating a netdev change and/or a netdev address change, we must change the MAC index used by the proxy QP1 (in the QP context), otherwise RoCE CM packets sent by the VF will not carry the same source MAC address as the non-CM packets. We use the UPDATE_QP command to perform this change. In order to avoid modifying a QP context based on netdev event, while the driver attempts to destroy this QP (e.g either the mlx4_ib or ib_mad modules are unloaded), we use mutex locking in both flows. Since the relevant mlx4 proxy GSI QP is created indirectly by the mad module when they create their GSI QP, the mlx4 didn't need to keep track on that QP prior to this change. Now, when QP modifications are needed to this QP from within the driver, we added refernece to it. Signed-off-by: Matan Barak Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/infiniband/hw/mlx4/main.c | 67 ++++++++++++++++++++++++++++++++++-- drivers/infiniband/hw/mlx4/mlx4_ib.h | 3 ++ drivers/infiniband/hw/mlx4/qp.c | 8 +++++ 3 files changed, 75 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c index 1b6dbe156a37..199c7896f081 100644 --- a/drivers/infiniband/hw/mlx4/main.c +++ b/drivers/infiniband/hw/mlx4/main.c @@ -48,6 +48,7 @@ #include #include +#include #include "mlx4_ib.h" #include "user.h" @@ -1614,6 +1615,53 @@ static int mlx4_ib_inet6_event(struct notifier_block *this, unsigned long event, } #endif +#define MLX4_IB_INVALID_MAC ((u64)-1) +static void mlx4_ib_update_qps(struct mlx4_ib_dev *ibdev, + struct net_device *dev, + int port) +{ + u64 new_smac = 0; + u64 release_mac = MLX4_IB_INVALID_MAC; + struct mlx4_ib_qp *qp; + + read_lock(&dev_base_lock); + new_smac = mlx4_mac_to_u64(dev->dev_addr); + read_unlock(&dev_base_lock); + + mutex_lock(&ibdev->qp1_proxy_lock[port - 1]); + qp = ibdev->qp1_proxy[port - 1]; + if (qp) { + int new_smac_index; + u64 old_smac = qp->pri.smac; + struct mlx4_update_qp_params update_params; + + if (new_smac == old_smac) + goto unlock; + + new_smac_index = mlx4_register_mac(ibdev->dev, port, new_smac); + + if (new_smac_index < 0) + goto unlock; + + update_params.smac_index = new_smac_index; + if (mlx4_update_qp(ibdev->dev, &qp->mqp, MLX4_UPDATE_QP_SMAC, + &update_params)) { + release_mac = new_smac; + goto unlock; + } + + qp->pri.smac = new_smac; + qp->pri.smac_index = new_smac_index; + + release_mac = old_smac; + } + +unlock: + mutex_unlock(&ibdev->qp1_proxy_lock[port - 1]); + if (release_mac != MLX4_IB_INVALID_MAC) + mlx4_unregister_mac(ibdev->dev, port, release_mac); +} + static void mlx4_ib_get_dev_addr(struct net_device *dev, struct mlx4_ib_dev *ibdev, u8 port) { @@ -1689,9 +1737,13 @@ static int mlx4_ib_init_gid_table(struct mlx4_ib_dev *ibdev) return 0; } -static void mlx4_ib_scan_netdevs(struct mlx4_ib_dev *ibdev) +static void mlx4_ib_scan_netdevs(struct mlx4_ib_dev *ibdev, + struct net_device *dev, + unsigned long event) + { struct mlx4_ib_iboe *iboe; + int update_qps_port = -1; int port; iboe = &ibdev->iboe; @@ -1719,6 +1771,11 @@ static void mlx4_ib_scan_netdevs(struct mlx4_ib_dev *ibdev) } curr_master = iboe->masters[port - 1]; + if (dev == iboe->netdevs[port - 1] && + (event == NETDEV_CHANGEADDR || event == NETDEV_REGISTER || + event == NETDEV_UP || event == NETDEV_CHANGE)) + update_qps_port = port; + if (curr_netdev) { port_state = (netif_running(curr_netdev) && netif_carrier_ok(curr_netdev)) ? IB_PORT_ACTIVE : IB_PORT_DOWN; @@ -1752,6 +1809,9 @@ static void mlx4_ib_scan_netdevs(struct mlx4_ib_dev *ibdev) } spin_unlock(&iboe->lock); + + if (update_qps_port > 0) + mlx4_ib_update_qps(ibdev, dev, update_qps_port); } static int mlx4_ib_netdev_event(struct notifier_block *this, @@ -1764,7 +1824,7 @@ static int mlx4_ib_netdev_event(struct notifier_block *this, return NOTIFY_DONE; ibdev = container_of(this, struct mlx4_ib_dev, iboe.nb); - mlx4_ib_scan_netdevs(ibdev); + mlx4_ib_scan_netdevs(ibdev, dev, event); return NOTIFY_DONE; } @@ -2043,6 +2103,7 @@ static void *mlx4_ib_add(struct mlx4_dev *dev) goto err_map; for (i = 0; i < ibdev->num_ports; ++i) { + mutex_init(&ibdev->qp1_proxy_lock[i]); if (mlx4_ib_port_link_layer(&ibdev->ib_dev, i + 1) == IB_LINK_LAYER_ETHERNET) { err = mlx4_counter_alloc(ibdev->dev, &ibdev->counters[i]); @@ -2126,7 +2187,7 @@ static void *mlx4_ib_add(struct mlx4_dev *dev) for (i = 1 ; i <= ibdev->num_ports ; ++i) reset_gid_table(ibdev, i); rtnl_lock(); - mlx4_ib_scan_netdevs(ibdev); + mlx4_ib_scan_netdevs(ibdev, NULL, 0); rtnl_unlock(); mlx4_ib_init_gid_table(ibdev); } diff --git a/drivers/infiniband/hw/mlx4/mlx4_ib.h b/drivers/infiniband/hw/mlx4/mlx4_ib.h index f589522fddfd..66b0b7dbd9f4 100644 --- a/drivers/infiniband/hw/mlx4/mlx4_ib.h +++ b/drivers/infiniband/hw/mlx4/mlx4_ib.h @@ -522,6 +522,9 @@ struct mlx4_ib_dev { int steer_qpn_count; int steer_qpn_base; int steering_support; + struct mlx4_ib_qp *qp1_proxy[MLX4_MAX_PORTS]; + /* lock when destroying qp1_proxy and getting netdev events */ + struct mutex qp1_proxy_lock[MLX4_MAX_PORTS]; }; struct ib_event_work { diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c index 41308af4163c..dc57482ae7af 100644 --- a/drivers/infiniband/hw/mlx4/qp.c +++ b/drivers/infiniband/hw/mlx4/qp.c @@ -1132,6 +1132,12 @@ int mlx4_ib_destroy_qp(struct ib_qp *qp) if (is_qp0(dev, mqp)) mlx4_CLOSE_PORT(dev->dev, mqp->port); + if (dev->qp1_proxy[mqp->port - 1] == mqp) { + mutex_lock(&dev->qp1_proxy_lock[mqp->port - 1]); + dev->qp1_proxy[mqp->port - 1] = NULL; + mutex_unlock(&dev->qp1_proxy_lock[mqp->port - 1]); + } + pd = get_pd(mqp); destroy_qp_common(dev, mqp, !!pd->ibpd.uobject); @@ -1646,6 +1652,8 @@ static int __mlx4_ib_modify_qp(struct ib_qp *ibqp, err = handle_eth_ud_smac_index(dev, qp, (u8 *)attr->smac, context); if (err) return -EINVAL; + if (qp->mlx4_ib_qp_type == MLX4_IB_QPT_PROXY_GSI) + dev->qp1_proxy[qp->port - 1] = qp; } } } -- cgit v1.2.3 From 6e14a5eeb158215881ef4507833a3574d0dbad19 Mon Sep 17 00:00:00 2001 From: Zhangfei Gao Date: Thu, 15 May 2014 13:35:34 +0800 Subject: net: phy: resume phydev when going to RESUMING With commit be9dad1f9f26604fb ("net: phy: suspend phydev when going to HALTED"), an unused PHY device will be put in a low-power mode using BMCR_PDOWN. Some Ethernet drivers might be calling phy_start() and phy_stop() from ndo_open and ndo_close() respectively, while calling phy_connect() and phy_disconnect() from probe and remove. In such a case, the PHY will be powered down during the phy_stop() call, but will fail to be powered up in phy_start(). This patch fixes this scenario. Signed-off-by: Jiancheng Xue Signed-off-by: Zhangfei Gao Signed-off-by: David S. Miller --- drivers/net/phy/phy.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index a972056b2249..3bc079a67a3d 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -715,7 +715,7 @@ void phy_state_machine(struct work_struct *work) struct delayed_work *dwork = to_delayed_work(work); struct phy_device *phydev = container_of(dwork, struct phy_device, state_queue); - int needs_aneg = 0, do_suspend = 0; + bool needs_aneg = false, do_suspend = false, do_resume = false; int err = 0; mutex_lock(&phydev->lock); @@ -727,7 +727,7 @@ void phy_state_machine(struct work_struct *work) case PHY_PENDING: break; case PHY_UP: - needs_aneg = 1; + needs_aneg = true; phydev->link_timeout = PHY_AN_TIMEOUT; @@ -757,7 +757,7 @@ void phy_state_machine(struct work_struct *work) phydev->adjust_link(phydev->attached_dev); } else if (0 == phydev->link_timeout--) - needs_aneg = 1; + needs_aneg = true; break; case PHY_NOLINK: err = phy_read_status(phydev); @@ -791,7 +791,7 @@ void phy_state_machine(struct work_struct *work) netif_carrier_on(phydev->attached_dev); } else { if (0 == phydev->link_timeout--) - needs_aneg = 1; + needs_aneg = true; } phydev->adjust_link(phydev->attached_dev); @@ -827,7 +827,7 @@ void phy_state_machine(struct work_struct *work) phydev->link = 0; netif_carrier_off(phydev->attached_dev); phydev->adjust_link(phydev->attached_dev); - do_suspend = 1; + do_suspend = true; } break; case PHY_RESUMING: @@ -876,6 +876,7 @@ void phy_state_machine(struct work_struct *work) } phydev->adjust_link(phydev->attached_dev); } + do_resume = true; break; } @@ -883,9 +884,10 @@ void phy_state_machine(struct work_struct *work) if (needs_aneg) err = phy_start_aneg(phydev); - - if (do_suspend) + else if (do_suspend) phy_suspend(phydev); + else if (do_resume) + phy_resume(phydev); if (err < 0) phy_error(phydev); -- cgit v1.2.3 From 0d08fceb2e21c30ca3e1e462e678723f806acf18 Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Fri, 16 May 2014 12:26:04 +0100 Subject: xen-netback: fix race between napi_complete() and interrupt handler When the NAPI budget was not all used, xenvif_poll() would call napi_complete() /after/ enabling the interrupt. This resulted in a race between the napi_complete() and the napi_schedule() in the interrupt handler. The use of local_irq_save/restore() avoided by race iff the handler is running on the same CPU but not if it was running on a different CPU. Fix this properly by calling napi_complete() before reenabling interrupts (in the xenvif_napi_schedule_or_enable_irq() call). Signed-off-by: David Vrabel Acked-by: Wei Liu Acked-by: Ian Campbell Signed-off-by: David S. Miller --- drivers/net/xen-netback/common.h | 2 +- drivers/net/xen-netback/interface.c | 30 +++--------------------------- drivers/net/xen-netback/netback.c | 4 ++-- 3 files changed, 6 insertions(+), 30 deletions(-) (limited to 'drivers') diff --git a/drivers/net/xen-netback/common.h b/drivers/net/xen-netback/common.h index 630a3fcf65bc..0d4a285cbd7e 100644 --- a/drivers/net/xen-netback/common.h +++ b/drivers/net/xen-netback/common.h @@ -226,7 +226,7 @@ int xenvif_map_frontend_rings(struct xenvif *vif, grant_ref_t rx_ring_ref); /* Check for SKBs from frontend and schedule backend processing */ -void xenvif_check_rx_xenvif(struct xenvif *vif); +void xenvif_napi_schedule_or_enable_events(struct xenvif *vif); /* Prevent the device from generating any further traffic. */ void xenvif_carrier_off(struct xenvif *vif); diff --git a/drivers/net/xen-netback/interface.c b/drivers/net/xen-netback/interface.c index ef05c5c49d41..20e9defa1060 100644 --- a/drivers/net/xen-netback/interface.c +++ b/drivers/net/xen-netback/interface.c @@ -75,32 +75,8 @@ static int xenvif_poll(struct napi_struct *napi, int budget) work_done = xenvif_tx_action(vif, budget); if (work_done < budget) { - int more_to_do = 0; - unsigned long flags; - - /* It is necessary to disable IRQ before calling - * RING_HAS_UNCONSUMED_REQUESTS. Otherwise we might - * lose event from the frontend. - * - * Consider: - * RING_HAS_UNCONSUMED_REQUESTS - * - * __napi_complete - * - * This handler is still in scheduled state so the - * event has no effect at all. After __napi_complete - * this handler is descheduled and cannot get - * scheduled again. We lose event in this case and the ring - * will be completely stalled. - */ - - local_irq_save(flags); - - RING_FINAL_CHECK_FOR_REQUESTS(&vif->tx, more_to_do); - if (!more_to_do) - __napi_complete(napi); - - local_irq_restore(flags); + napi_complete(napi); + xenvif_napi_schedule_or_enable_events(vif); } return work_done; @@ -194,7 +170,7 @@ static void xenvif_up(struct xenvif *vif) enable_irq(vif->tx_irq); if (vif->tx_irq != vif->rx_irq) enable_irq(vif->rx_irq); - xenvif_check_rx_xenvif(vif); + xenvif_napi_schedule_or_enable_events(vif); } static void xenvif_down(struct xenvif *vif) diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c index 64ab1d141f1c..7367208ee8cd 100644 --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -716,7 +716,7 @@ done: notify_remote_via_irq(vif->rx_irq); } -void xenvif_check_rx_xenvif(struct xenvif *vif) +void xenvif_napi_schedule_or_enable_events(struct xenvif *vif) { int more_to_do; @@ -750,7 +750,7 @@ static void tx_credit_callback(unsigned long data) { struct xenvif *vif = (struct xenvif *)data; tx_add_credit(vif); - xenvif_check_rx_xenvif(vif); + xenvif_napi_schedule_or_enable_events(vif); } static void xenvif_tx_err(struct xenvif *vif, -- cgit v1.2.3 From c674ac30c549596295eb0a5af7f4714c0b905b6f Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Fri, 16 May 2014 17:04:56 -0400 Subject: macvlan: Fix lockdep warnings with stacked macvlan devices Macvlan devices try to avoid stacking, but that's not always successfull or even desired. As an example, the following configuration is perefectly legal and valid: eth0 <--- macvlan0 <---- vlan0.10 <--- macvlan1 However, this configuration produces the following lockdep trace: [ 115.620418] ====================================================== [ 115.620477] [ INFO: possible circular locking dependency detected ] [ 115.620516] 3.15.0-rc1+ #24 Not tainted [ 115.620540] ------------------------------------------------------- [ 115.620577] ip/1704 is trying to acquire lock: [ 115.620604] (&vlan_netdev_addr_lock_key/1){+.....}, at: [] dev_uc_sync+0x3c/0x80 [ 115.620686] but task is already holding lock: [ 115.620723] (&macvlan_netdev_addr_lock_key){+.....}, at: [] dev_set_rx_mode+0x1e/0x40 [ 115.620795] which lock already depends on the new lock. [ 115.620853] the existing dependency chain (in reverse order) is: [ 115.620894] -> #1 (&macvlan_netdev_addr_lock_key){+.....}: [ 115.620935] [] lock_acquire+0xa2/0x130 [ 115.620974] [] _raw_spin_lock_nested+0x37/0x50 [ 115.621019] [] vlan_dev_set_rx_mode+0x53/0x110 [8021q] [ 115.621066] [] __dev_set_rx_mode+0x57/0xa0 [ 115.621105] [] dev_set_rx_mode+0x26/0x40 [ 115.621143] [] __dev_open+0xde/0x140 [ 115.621174] [] __dev_change_flags+0x9d/0x170 [ 115.621174] [] dev_change_flags+0x29/0x60 [ 115.621174] [] do_setlink+0x321/0x9a0 [ 115.621174] [] rtnl_newlink+0x51f/0x730 [ 115.621174] [] rtnetlink_rcv_msg+0x95/0x250 [ 115.621174] [] netlink_rcv_skb+0xa9/0xc0 [ 115.621174] [] rtnetlink_rcv+0x2a/0x40 [ 115.621174] [] netlink_unicast+0xf0/0x1c0 [ 115.621174] [] netlink_sendmsg+0x2ff/0x740 [ 115.621174] [] sock_sendmsg+0x8b/0xc0 [ 115.621174] [] ___sys_sendmsg+0x369/0x380 [ 115.621174] [] __sys_sendmsg+0x42/0x80 [ 115.621174] [] SyS_sendmsg+0x12/0x20 [ 115.621174] [] system_call_fastpath+0x16/0x1b [ 115.621174] -> #0 (&vlan_netdev_addr_lock_key/1){+.....}: [ 115.621174] [] __lock_acquire+0x1773/0x1a60 [ 115.621174] [] lock_acquire+0xa2/0x130 [ 115.621174] [] _raw_spin_lock_nested+0x37/0x50 [ 115.621174] [] dev_uc_sync+0x3c/0x80 [ 115.621174] [] macvlan_set_mac_lists+0xca/0x110 [macvlan] [ 115.621174] [] __dev_set_rx_mode+0x57/0xa0 [ 115.621174] [] dev_set_rx_mode+0x26/0x40 [ 115.621174] [] __dev_open+0xde/0x140 [ 115.621174] [] __dev_change_flags+0x9d/0x170 [ 115.621174] [] dev_change_flags+0x29/0x60 [ 115.621174] [] do_setlink+0x321/0x9a0 [ 115.621174] [] rtnl_newlink+0x51f/0x730 [ 115.621174] [] rtnetlink_rcv_msg+0x95/0x250 [ 115.621174] [] netlink_rcv_skb+0xa9/0xc0 [ 115.621174] [] rtnetlink_rcv+0x2a/0x40 [ 115.621174] [] netlink_unicast+0xf0/0x1c0 [ 115.621174] [] netlink_sendmsg+0x2ff/0x740 [ 115.621174] [] sock_sendmsg+0x8b/0xc0 [ 115.621174] [] ___sys_sendmsg+0x369/0x380 [ 115.621174] [] __sys_sendmsg+0x42/0x80 [ 115.621174] [] SyS_sendmsg+0x12/0x20 [ 115.621174] [] system_call_fastpath+0x16/0x1b [ 115.621174] other info that might help us debug this: [ 115.621174] Possible unsafe locking scenario: [ 115.621174] CPU0 CPU1 [ 115.621174] ---- ---- [ 115.621174] lock(&macvlan_netdev_addr_lock_key); [ 115.621174] lock(&vlan_netdev_addr_lock_key/1); [ 115.621174] lock(&macvlan_netdev_addr_lock_key); [ 115.621174] lock(&vlan_netdev_addr_lock_key/1); [ 115.621174] *** DEADLOCK *** [ 115.621174] 2 locks held by ip/1704: [ 115.621174] #0: (rtnl_mutex){+.+.+.}, at: [] rtnetlink_rcv+0x1b/0x40 [ 115.621174] #1: (&macvlan_netdev_addr_lock_key){+.....}, at: [] dev_set_rx_mode+0x1e/0x40 [ 115.621174] stack backtrace: [ 115.621174] CPU: 3 PID: 1704 Comm: ip Not tainted 3.15.0-rc1+ #24 [ 115.621174] Hardware name: Hewlett-Packard HP xw8400 Workstation/0A08h, BIOS 786D5 v02.38 10/25/2010 [ 115.621174] ffffffff82339ae0 ffff880465f79568 ffffffff816ee20c ffffffff82339ae0 [ 115.621174] ffff880465f795a8 ffffffff816e9e1b ffff880465f79600 ffff880465b019c8 [ 115.621174] 0000000000000001 0000000000000002 ffff880465b019c8 ffff880465b01230 [ 115.621174] Call Trace: [ 115.621174] [] dump_stack+0x4d/0x66 [ 115.621174] [] print_circular_bug+0x200/0x20e [ 115.621174] [] __lock_acquire+0x1773/0x1a60 [ 115.621174] [] ? trace_hardirqs_on_caller+0xb2/0x1d0 [ 115.621174] [] lock_acquire+0xa2/0x130 [ 115.621174] [] ? dev_uc_sync+0x3c/0x80 [ 115.621174] [] _raw_spin_lock_nested+0x37/0x50 [ 115.621174] [] ? dev_uc_sync+0x3c/0x80 [ 115.621174] [] dev_uc_sync+0x3c/0x80 [ 115.621174] [] macvlan_set_mac_lists+0xca/0x110 [macvlan] [ 115.621174] [] __dev_set_rx_mode+0x57/0xa0 [ 115.621174] [] dev_set_rx_mode+0x26/0x40 [ 115.621174] [] __dev_open+0xde/0x140 [ 115.621174] [] __dev_change_flags+0x9d/0x170 [ 115.621174] [] dev_change_flags+0x29/0x60 [ 115.621174] [] ? mem_cgroup_bad_page_check+0x21/0x30 [ 115.621174] [] do_setlink+0x321/0x9a0 [ 115.621174] [] ? __lock_acquire+0x37c/0x1a60 [ 115.621174] [] rtnl_newlink+0x51f/0x730 [ 115.621174] [] ? rtnl_newlink+0xe9/0x730 [ 115.621174] [] rtnetlink_rcv_msg+0x95/0x250 [ 115.621174] [] ? trace_hardirqs_on+0xd/0x10 [ 115.621174] [] ? rtnetlink_rcv+0x1b/0x40 [ 115.621174] [] ? rtnetlink_rcv+0x40/0x40 [ 115.621174] [] netlink_rcv_skb+0xa9/0xc0 [ 115.621174] [] rtnetlink_rcv+0x2a/0x40 [ 115.621174] [] netlink_unicast+0xf0/0x1c0 [ 115.621174] [] netlink_sendmsg+0x2ff/0x740 [ 115.621174] [] sock_sendmsg+0x8b/0xc0 [ 115.621174] [] ? might_fault+0x5f/0xb0 [ 115.621174] [] ? might_fault+0xa8/0xb0 [ 115.621174] [] ? might_fault+0x5f/0xb0 [ 115.621174] [] ? verify_iovec+0x5e/0xe0 [ 115.621174] [] ___sys_sendmsg+0x369/0x380 [ 115.621174] [] ? __do_page_fault+0x11d/0x570 [ 115.621174] [] ? up_read+0x1f/0x40 [ 115.621174] [] ? __do_page_fault+0x214/0x570 [ 115.621174] [] ? mntput_no_expire+0x6b/0x1c0 [ 115.621174] [] ? mntput_no_expire+0x17/0x1c0 [ 115.621174] [] ? mntput+0x24/0x40 [ 115.621174] [] __sys_sendmsg+0x42/0x80 [ 115.621174] [] SyS_sendmsg+0x12/0x20 [ 115.621174] [] system_call_fastpath+0x16/0x1b Fix this by correctly providing macvlan lockdep class. Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller --- drivers/net/macvlan.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index c5fb9cf95c12..d53e299ae1d9 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -517,6 +517,11 @@ static struct lock_class_key macvlan_netdev_addr_lock_key; #define MACVLAN_STATE_MASK \ ((1<<__LINK_STATE_NOCARRIER) | (1<<__LINK_STATE_DORMANT)) +static int macvlan_get_nest_level(struct net_device *dev) +{ + return ((struct macvlan_dev *)netdev_priv(dev))->nest_level; +} + static void macvlan_set_lockdep_class_one(struct net_device *dev, struct netdev_queue *txq, void *_unused) @@ -527,8 +532,9 @@ static void macvlan_set_lockdep_class_one(struct net_device *dev, static void macvlan_set_lockdep_class(struct net_device *dev) { - lockdep_set_class(&dev->addr_list_lock, - &macvlan_netdev_addr_lock_key); + lockdep_set_class_and_subclass(&dev->addr_list_lock, + &macvlan_netdev_addr_lock_key, + macvlan_get_nest_level(dev)); netdev_for_each_tx_queue(dev, macvlan_set_lockdep_class_one, NULL); } @@ -723,6 +729,7 @@ static const struct net_device_ops macvlan_netdev_ops = { .ndo_fdb_add = macvlan_fdb_add, .ndo_fdb_del = macvlan_fdb_del, .ndo_fdb_dump = ndo_dflt_fdb_dump, + .ndo_get_lock_subclass = macvlan_get_nest_level, }; void macvlan_common_setup(struct net_device *dev) @@ -851,6 +858,7 @@ int macvlan_common_newlink(struct net *src_net, struct net_device *dev, vlan->dev = dev; vlan->port = port; vlan->set_features = MACVLAN_FEATURES; + vlan->nest_level = dev_get_nest_level(lowerdev, netif_is_macvlan) + 1; vlan->mode = MACVLAN_MODE_VEPA; if (data && data[IFLA_MACVLAN_MODE]) -- cgit v1.2.3 From 44a4085538c844e79d6ee6bcf46fabf7c57a9a38 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Fri, 16 May 2014 17:20:38 -0400 Subject: bonding: Fix stacked device detection in arp monitoring Prior to commit fbd929f2dce460456807a51e18d623db3db9f077 bonding: support QinQ for bond arp interval the arp monitoring code allowed for proper detection of devices stacked on top of vlans. Since the above commit, the code can still detect a device stacked on top of single vlan, but not a device stacked on top of Q-in-Q configuration. The search will only set the inner vlan tag if the route device is the vlan device. However, this is not always the case, as it is possible to extend the stacked configuration. With this patch it is possible to provision devices on top Q-in-Q vlan configuration that should be used as a source of ARP monitoring information. For example: ip link add link bond0 vlan10 type vlan proto 802.1q id 10 ip link add link vlan10 vlan100 type vlan proto 802.1q id 100 ip link add link vlan100 type macvlan Note: This patch limites the number of stacked VLANs to 2, just like before. The original, however had another issue in that if we had more then 2 levels of VLANs, we would end up generating incorrectly tagged traffic. This is no longer possible. Fixes: fbd929f2dce460456807a51e18d623db3db9f077 (bonding: support QinQ for bond arp interval) CC: Jay Vosburgh CC: Veaceslav Falico CC: Andy Gospodarek CC: Ding Tianhong CC: Patric McHardy Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 134 +++++++++++++++++++--------------------- drivers/net/bonding/bonding.h | 1 + 2 files changed, 66 insertions(+), 69 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 69aff72c8957..d3a67896d435 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -2126,10 +2126,10 @@ static bool bond_has_this_ip(struct bonding *bond, __be32 ip) */ static void bond_arp_send(struct net_device *slave_dev, int arp_op, __be32 dest_ip, __be32 src_ip, - struct bond_vlan_tag *inner, - struct bond_vlan_tag *outer) + struct bond_vlan_tag *tags) { struct sk_buff *skb; + int i; pr_debug("arp %d on slave %s: dst %pI4 src %pI4\n", arp_op, slave_dev->name, &dest_ip, &src_ip); @@ -2141,21 +2141,26 @@ static void bond_arp_send(struct net_device *slave_dev, int arp_op, net_err_ratelimited("ARP packet allocation failed\n"); return; } - if (outer->vlan_id) { - if (inner->vlan_id) { - pr_debug("inner tag: proto %X vid %X\n", - ntohs(inner->vlan_proto), inner->vlan_id); - skb = __vlan_put_tag(skb, inner->vlan_proto, - inner->vlan_id); - if (!skb) { - net_err_ratelimited("failed to insert inner VLAN tag\n"); - return; - } - } - pr_debug("outer reg: proto %X vid %X\n", - ntohs(outer->vlan_proto), outer->vlan_id); - skb = vlan_put_tag(skb, outer->vlan_proto, outer->vlan_id); + /* Go through all the tags backwards and add them to the packet */ + for (i = BOND_MAX_VLAN_ENCAP - 1; i > 0; i--) { + if (!tags[i].vlan_id) + continue; + + pr_debug("inner tag: proto %X vid %X\n", + ntohs(tags[i].vlan_proto), tags[i].vlan_id); + skb = __vlan_put_tag(skb, tags[i].vlan_proto, + tags[i].vlan_id); + if (!skb) { + net_err_ratelimited("failed to insert inner VLAN tag\n"); + return; + } + } + /* Set the outer tag */ + if (tags[0].vlan_id) { + pr_debug("outer tag: proto %X vid %X\n", + ntohs(tags[0].vlan_proto), tags[0].vlan_id); + skb = vlan_put_tag(skb, tags[0].vlan_proto, tags[0].vlan_id); if (!skb) { net_err_ratelimited("failed to insert outer VLAN tag\n"); return; @@ -2164,22 +2169,52 @@ static void bond_arp_send(struct net_device *slave_dev, int arp_op, arp_xmit(skb); } +/* Validate the device path between the @start_dev and the @end_dev. + * The path is valid if the @end_dev is reachable through device + * stacking. + * When the path is validated, collect any vlan information in the + * path. + */ +static bool bond_verify_device_path(struct net_device *start_dev, + struct net_device *end_dev, + struct bond_vlan_tag *tags) +{ + struct net_device *upper; + struct list_head *iter; + int idx; + + if (start_dev == end_dev) + return true; + + netdev_for_each_upper_dev_rcu(start_dev, upper, iter) { + if (bond_verify_device_path(upper, end_dev, tags)) { + if (is_vlan_dev(upper)) { + idx = vlan_get_encap_level(upper); + if (idx >= BOND_MAX_VLAN_ENCAP) + return false; + + tags[idx].vlan_proto = + vlan_dev_vlan_proto(upper); + tags[idx].vlan_id = vlan_dev_vlan_id(upper); + } + return true; + } + } + + return false; +} static void bond_arp_send_all(struct bonding *bond, struct slave *slave) { - struct net_device *upper, *vlan_upper; - struct list_head *iter, *vlan_iter; struct rtable *rt; - struct bond_vlan_tag inner, outer; + struct bond_vlan_tag tags[BOND_MAX_VLAN_ENCAP]; __be32 *targets = bond->params.arp_targets, addr; int i; + bool ret; for (i = 0; i < BOND_MAX_ARP_TARGETS && targets[i]; i++) { pr_debug("basa: target %pI4\n", &targets[i]); - inner.vlan_proto = 0; - inner.vlan_id = 0; - outer.vlan_proto = 0; - outer.vlan_id = 0; + memset(tags, 0, sizeof(tags)); /* Find out through which dev should the packet go */ rt = ip_route_output(dev_net(bond->dev), targets[i], 0, @@ -2192,7 +2227,8 @@ static void bond_arp_send_all(struct bonding *bond, struct slave *slave) net_warn_ratelimited("%s: no route to arp_ip_target %pI4 and arp_validate is set\n", bond->dev->name, &targets[i]); - bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i], 0, &inner, &outer); + bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i], + 0, tags); continue; } @@ -2201,52 +2237,12 @@ static void bond_arp_send_all(struct bonding *bond, struct slave *slave) goto found; rcu_read_lock(); - /* first we search only for vlan devices. for every vlan - * found we verify its upper dev list, searching for the - * rt->dst.dev. If found we save the tag of the vlan and - * proceed to send the packet. - */ - netdev_for_each_all_upper_dev_rcu(bond->dev, vlan_upper, - vlan_iter) { - if (!is_vlan_dev(vlan_upper)) - continue; - - if (vlan_upper == rt->dst.dev) { - outer.vlan_proto = vlan_dev_vlan_proto(vlan_upper); - outer.vlan_id = vlan_dev_vlan_id(vlan_upper); - rcu_read_unlock(); - goto found; - } - netdev_for_each_all_upper_dev_rcu(vlan_upper, upper, - iter) { - if (upper == rt->dst.dev) { - /* If the upper dev is a vlan dev too, - * set the vlan tag to inner tag. - */ - if (is_vlan_dev(upper)) { - inner.vlan_proto = vlan_dev_vlan_proto(upper); - inner.vlan_id = vlan_dev_vlan_id(upper); - } - outer.vlan_proto = vlan_dev_vlan_proto(vlan_upper); - outer.vlan_id = vlan_dev_vlan_id(vlan_upper); - rcu_read_unlock(); - goto found; - } - } - } - - /* if the device we're looking for is not on top of any of - * our upper vlans, then just search for any dev that - * matches, and in case it's a vlan - save the id - */ - netdev_for_each_all_upper_dev_rcu(bond->dev, upper, iter) { - if (upper == rt->dst.dev) { - rcu_read_unlock(); - goto found; - } - } + ret = bond_verify_device_path(bond->dev, rt->dst.dev, tags); rcu_read_unlock(); + if (ret) + goto found; + /* Not our device - skip */ pr_debug("%s: no path to arp_ip_target %pI4 via rt.dev %s\n", bond->dev->name, &targets[i], @@ -2259,7 +2255,7 @@ found: addr = bond_confirm_addr(rt->dst.dev, targets[i], 0); ip_rt_put(rt); bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i], - addr, &inner, &outer); + addr, tags); } } diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h index b8bdd0acc8f3..00bea320e3b5 100644 --- a/drivers/net/bonding/bonding.h +++ b/drivers/net/bonding/bonding.h @@ -36,6 +36,7 @@ #define bond_version DRV_DESCRIPTION ": v" DRV_VERSION " (" DRV_RELDATE ")\n" +#define BOND_MAX_VLAN_ENCAP 2 #define BOND_MAX_ARP_TARGETS 16 #define BOND_DEFAULT_MIIMON 100 -- cgit v1.2.3 From f60c3704e87d39356d00c71bf51e55c2c55ad4f5 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Fri, 16 May 2014 17:20:39 -0400 Subject: bonding: Fix alb mode to only use first level vlans. ALB/TLB learning packets use all vlans configured on top of the bond. This ends up being incorrect if we have a stack of vlans on top of the bond. ALB/TLB should only use first level/outer most vlans in its announcements. Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller --- drivers/net/bonding/bond_alb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c index 9f69e818b000..e53847884319 100644 --- a/drivers/net/bonding/bond_alb.c +++ b/drivers/net/bonding/bond_alb.c @@ -1045,7 +1045,7 @@ static void alb_send_learning_packets(struct slave *slave, u8 mac_addr[]) /* loop through vlans and send one packet for each */ rcu_read_lock(); netdev_for_each_all_upper_dev_rcu(bond->dev, upper, iter) { - if (upper->priv_flags & IFF_802_1Q_VLAN) + if (is_vlan_dev(upper) && vlan_get_encap_level(upper) == 0) alb_send_lp_vid(slave, mac_addr, vlan_dev_vlan_id(upper)); } -- cgit v1.2.3 From 02948344fbf511c6eec28687dc76bb64b758ff93 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Thu, 15 May 2014 23:51:43 -0700 Subject: bnx2x: Convert return 0 to return rc These "return 0;" uses seem wrong as there are rc variables where error return values are set but unused. Signed-off-by: Joe Perches Acked-by: Dmitry Kravkov Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 2 +- drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index 81cc2d9831c2..b8078d50261b 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -2695,7 +2695,7 @@ out: bnx2x_unlock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_MAC); } - return 0; + return rc; } int bnx2x_set_vf_vlan(struct net_device *dev, int vfidx, u16 vlan, u8 qos) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c index 0c067e8564dd..784c7155b98a 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c @@ -747,7 +747,7 @@ int bnx2x_vfpf_config_mac(struct bnx2x *bp, u8 *addr, u8 vf_qid, bool set) out: bnx2x_vfpf_finalize(bp, &req->first_tlv); - return 0; + return rc; } /* request pf to config rss table for vf queues*/ -- cgit v1.2.3 From 524369e2391f4b422d0efdd11d526a373a11a43a Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Tue, 6 May 2014 19:45:38 +0200 Subject: can: c_can: remove obsolete STRICT_FRAME_ORDERING Kconfig option MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In 2b9aecdce2 ("can: c_can: Disable rx split as workaround") a new Kconfig option was introduced as a workaround. The tests performed by Alexander Stein confirmed this option to be obsolete with all the other cleanups and fixes that had been discussed that time: http://marc.info/?l=linux-can&m=139746476821294&w=2 Both (author and tester) agreed to remove this Kconfig option again: http://marc.info/?l=linux-can&m=139883820714229&w=2 As some more cleanups took place since then a simple revert is not possible. This patch removes the entire option as it would behave when disabled. Further beautification’s can be done later. Signed-off-by: Oliver Hartkopp Tested-by: Alexander Stein Signed-off-by: Marc Kleine-Budde --- drivers/net/can/c_can/Kconfig | 7 ------- drivers/net/can/c_can/c_can.c | 36 ------------------------------------ 2 files changed, 43 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/c_can/Kconfig b/drivers/net/can/c_can/Kconfig index 8ab7103d4f44..61ffc12d8fd8 100644 --- a/drivers/net/can/c_can/Kconfig +++ b/drivers/net/can/c_can/Kconfig @@ -14,13 +14,6 @@ config CAN_C_CAN_PLATFORM SPEAr1310 and SPEAr320 evaluation boards & TI (www.ti.com) boards like am335x, dm814x, dm813x and dm811x. -config CAN_C_CAN_STRICT_FRAME_ORDERING - bool "Force a strict RX CAN frame order (may cause frame loss)" - ---help--- - The RX split buffer prevents packet reordering but can cause packet - loss. Only enable this option when you accept to lose CAN frames - in favour of getting the received CAN frames in the correct order. - config CAN_C_CAN_PCI tristate "Generic PCI Bus based C_CAN/D_CAN driver" depends on PCI diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index a2ca820b5373..95e04e2002da 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -732,26 +732,12 @@ static u32 c_can_adjust_pending(u32 pend) static inline void c_can_rx_object_get(struct net_device *dev, struct c_can_priv *priv, u32 obj) { -#ifdef CONFIG_CAN_C_CAN_STRICT_FRAME_ORDERING - if (obj < C_CAN_MSG_RX_LOW_LAST) - c_can_object_get(dev, IF_RX, obj, IF_COMM_RCV_LOW); - else -#endif c_can_object_get(dev, IF_RX, obj, priv->comm_rcv_high); } static inline void c_can_rx_finalize(struct net_device *dev, struct c_can_priv *priv, u32 obj) { -#ifdef CONFIG_CAN_C_CAN_STRICT_FRAME_ORDERING - if (obj < C_CAN_MSG_RX_LOW_LAST) - priv->rxmasked |= BIT(obj - 1); - else if (obj == C_CAN_MSG_RX_LOW_LAST) { - priv->rxmasked = 0; - /* activate all lower message objects */ - c_can_activate_all_lower_rx_msg_obj(dev, IF_RX); - } -#endif if (priv->type != BOSCH_D_CAN) c_can_object_get(dev, IF_RX, obj, IF_COMM_CLR_NEWDAT); } @@ -799,9 +785,6 @@ static inline u32 c_can_get_pending(struct c_can_priv *priv) { u32 pend = priv->read_reg(priv, C_CAN_NEWDAT1_REG); -#ifdef CONFIG_CAN_C_CAN_STRICT_FRAME_ORDERING - pend &= ~priv->rxmasked; -#endif return pend; } @@ -814,25 +797,6 @@ static inline u32 c_can_get_pending(struct c_can_priv *priv) * has arrived. To work-around this issue, we keep two groups of message * objects whose partitioning is defined by C_CAN_MSG_OBJ_RX_SPLIT. * - * If CONFIG_CAN_C_CAN_STRICT_FRAME_ORDERING = y - * - * To ensure in-order frame reception we use the following - * approach while re-activating a message object to receive further - * frames: - * - if the current message object number is lower than - * C_CAN_MSG_RX_LOW_LAST, do not clear the NEWDAT bit while clearing - * the INTPND bit. - * - if the current message object number is equal to - * C_CAN_MSG_RX_LOW_LAST then clear the NEWDAT bit of all lower - * receive message objects. - * - if the current message object number is greater than - * C_CAN_MSG_RX_LOW_LAST then clear the NEWDAT bit of - * only this message object. - * - * This can cause packet loss! - * - * If CONFIG_CAN_C_CAN_STRICT_FRAME_ORDERING = n - * * We clear the newdat bit right away. * * This can result in packet reordering when the readout is slow. -- cgit v1.2.3 From 6679b2ccc914e84384b1acf0de4423e3738cce9f Mon Sep 17 00:00:00 2001 From: Martin Peres Date: Mon, 12 May 2014 15:05:01 +0200 Subject: drm/nvd9/therm: handle another kind of PWM fan Signed-off-by: Martin Peres Tested-by: SaveTheRobots Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/subdev/therm/nvd0.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/core/subdev/therm/nvd0.c b/drivers/gpu/drm/nouveau/core/subdev/therm/nvd0.c index 43fec17ea540..bbf117be572f 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/therm/nvd0.c +++ b/drivers/gpu/drm/nouveau/core/subdev/therm/nvd0.c @@ -40,6 +40,7 @@ pwm_info(struct nouveau_therm *therm, int line) case 0x00: return 2; case 0x19: return 1; case 0x1c: return 0; + case 0x1e: return 2; default: break; } -- cgit v1.2.3 From 0f1d360b2ee3a2a0f510d3f1bcd3f5ebe5d41265 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 20 May 2014 16:13:54 +1000 Subject: drm/gf119-/disp: fix nasty bug which can clobber SOR0's clock setup Fixes a LVDS bleed issue on Lenovo W530 that can occur under a number of circumstances. Cc: # v3.9+ Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/engine/disp/nvd0.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/core/engine/disp/nvd0.c b/drivers/gpu/drm/nouveau/core/engine/disp/nvd0.c index 7762665ad8fd..876de9ac3793 100644 --- a/drivers/gpu/drm/nouveau/core/engine/disp/nvd0.c +++ b/drivers/gpu/drm/nouveau/core/engine/disp/nvd0.c @@ -1009,7 +1009,7 @@ exec_clkcmp(struct nv50_disp_priv *priv, int head, int id, } if (outp == 8) - return false; + return conf; data = exec_lookup(priv, head, outp, ctrl, dcb, &ver, &hdr, &cnt, &len, &info1); if (data == 0x0000) -- cgit v1.2.3 From 544092596e8ac269f70e70961b5e9381909c9b1e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Mon, 5 May 2014 18:40:12 +0200 Subject: drm/radeon: also try GART for CPU accessed buffers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Placing them exclusively into VRAM might not work all the time. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=78297 Signed-off-by: Christian König Reviewed-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_object.c | 38 ++++++++++++++++++++-------------- 1 file changed, 23 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c index 19bec0dbfa38..72705fb40d55 100644 --- a/drivers/gpu/drm/radeon/radeon_object.c +++ b/drivers/gpu/drm/radeon/radeon_object.c @@ -699,22 +699,30 @@ int radeon_bo_fault_reserve_notify(struct ttm_buffer_object *bo) rbo = container_of(bo, struct radeon_bo, tbo); radeon_bo_check_tiling(rbo, 0, 0); rdev = rbo->rdev; - if (bo->mem.mem_type == TTM_PL_VRAM) { - size = bo->mem.num_pages << PAGE_SHIFT; - offset = bo->mem.start << PAGE_SHIFT; - if ((offset + size) > rdev->mc.visible_vram_size) { - /* hurrah the memory is not visible ! */ - radeon_ttm_placement_from_domain(rbo, RADEON_GEM_DOMAIN_VRAM); - rbo->placement.lpfn = rdev->mc.visible_vram_size >> PAGE_SHIFT; - r = ttm_bo_validate(bo, &rbo->placement, false, false); - if (unlikely(r != 0)) - return r; - offset = bo->mem.start << PAGE_SHIFT; - /* this should not happen */ - if ((offset + size) > rdev->mc.visible_vram_size) - return -EINVAL; - } + if (bo->mem.mem_type != TTM_PL_VRAM) + return 0; + + size = bo->mem.num_pages << PAGE_SHIFT; + offset = bo->mem.start << PAGE_SHIFT; + if ((offset + size) <= rdev->mc.visible_vram_size) + return 0; + + /* hurrah the memory is not visible ! */ + radeon_ttm_placement_from_domain(rbo, RADEON_GEM_DOMAIN_VRAM); + rbo->placement.lpfn = rdev->mc.visible_vram_size >> PAGE_SHIFT; + r = ttm_bo_validate(bo, &rbo->placement, false, false); + if (unlikely(r == -ENOMEM)) { + radeon_ttm_placement_from_domain(rbo, RADEON_GEM_DOMAIN_GTT); + return ttm_bo_validate(bo, &rbo->placement, false, false); + } else if (unlikely(r != 0)) { + return r; } + + offset = bo->mem.start << PAGE_SHIFT; + /* this should never happen */ + if ((offset + size) > rdev->mc.visible_vram_size) + return -EINVAL; + return 0; } -- cgit v1.2.3 From 2fc5703abda201f138faf63bdca743d04dbf4b1a Mon Sep 17 00:00:00 2001 From: Leo Liu Date: Mon, 5 May 2014 15:42:18 -0400 Subject: drm/radeon: check VCE relocation buffer range v3 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit v2 (chk): fix image size storage v3 (chk): fix UV size calculation Signed-off-by: Leo Liu Signed-off-by: Christian König --- drivers/gpu/drm/radeon/radeon.h | 3 +- drivers/gpu/drm/radeon/radeon_vce.c | 130 +++++++++++++++++++++++++++--------- 2 files changed, 102 insertions(+), 31 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 68528619834a..91be3d6eb845 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -1642,6 +1642,7 @@ struct radeon_vce { unsigned fb_version; atomic_t handles[RADEON_MAX_VCE_HANDLES]; struct drm_file *filp[RADEON_MAX_VCE_HANDLES]; + unsigned img_size[RADEON_MAX_VCE_HANDLES]; struct delayed_work idle_work; }; @@ -1655,7 +1656,7 @@ int radeon_vce_get_destroy_msg(struct radeon_device *rdev, int ring, uint32_t handle, struct radeon_fence **fence); void radeon_vce_free_handles(struct radeon_device *rdev, struct drm_file *filp); void radeon_vce_note_usage(struct radeon_device *rdev); -int radeon_vce_cs_reloc(struct radeon_cs_parser *p, int lo, int hi); +int radeon_vce_cs_reloc(struct radeon_cs_parser *p, int lo, int hi, unsigned size); int radeon_vce_cs_parse(struct radeon_cs_parser *p); bool radeon_vce_semaphore_emit(struct radeon_device *rdev, struct radeon_ring *ring, diff --git a/drivers/gpu/drm/radeon/radeon_vce.c b/drivers/gpu/drm/radeon/radeon_vce.c index f73324c81491..3971d968af6c 100644 --- a/drivers/gpu/drm/radeon/radeon_vce.c +++ b/drivers/gpu/drm/radeon/radeon_vce.c @@ -443,13 +443,16 @@ int radeon_vce_get_destroy_msg(struct radeon_device *rdev, int ring, * @p: parser context * @lo: address of lower dword * @hi: address of higher dword + * @size: size of checker for relocation buffer * * Patch relocation inside command stream with real buffer address */ -int radeon_vce_cs_reloc(struct radeon_cs_parser *p, int lo, int hi) +int radeon_vce_cs_reloc(struct radeon_cs_parser *p, int lo, int hi, + unsigned size) { struct radeon_cs_chunk *relocs_chunk; - uint64_t offset; + struct radeon_cs_reloc *reloc; + uint64_t start, end, offset; unsigned idx; relocs_chunk = &p->chunks[p->chunk_relocs_idx]; @@ -462,14 +465,59 @@ int radeon_vce_cs_reloc(struct radeon_cs_parser *p, int lo, int hi) return -EINVAL; } - offset += p->relocs_ptr[(idx / 4)]->gpu_offset; + reloc = p->relocs_ptr[(idx / 4)]; + start = reloc->gpu_offset; + end = start + radeon_bo_size(reloc->robj); + start += offset; - p->ib.ptr[lo] = offset & 0xFFFFFFFF; - p->ib.ptr[hi] = offset >> 32; + p->ib.ptr[lo] = start & 0xFFFFFFFF; + p->ib.ptr[hi] = start >> 32; + + if (end <= start) { + DRM_ERROR("invalid reloc offset %llX!\n", offset); + return -EINVAL; + } + if ((end - start) < size) { + DRM_ERROR("buffer to small (%d / %d)!\n", + (unsigned)(end - start), size); + return -EINVAL; + } return 0; } +/** + * radeon_vce_validate_handle - validate stream handle + * + * @p: parser context + * @handle: handle to validate + * + * Validates the handle and return the found session index or -EINVAL + * we we don't have another free session index. + */ +int radeon_vce_validate_handle(struct radeon_cs_parser *p, uint32_t handle) +{ + unsigned i; + + /* validate the handle */ + for (i = 0; i < RADEON_MAX_VCE_HANDLES; ++i) { + if (atomic_read(&p->rdev->vce.handles[i]) == handle) + return i; + } + + /* handle not found try to alloc a new one */ + for (i = 0; i < RADEON_MAX_VCE_HANDLES; ++i) { + if (!atomic_cmpxchg(&p->rdev->vce.handles[i], 0, handle)) { + p->rdev->vce.filp[i] = p->filp; + p->rdev->vce.img_size[i] = 0; + return i; + } + } + + DRM_ERROR("No more free VCE handles!\n"); + return -EINVAL; +} + /** * radeon_vce_cs_parse - parse and validate the command stream * @@ -478,8 +526,10 @@ int radeon_vce_cs_reloc(struct radeon_cs_parser *p, int lo, int hi) */ int radeon_vce_cs_parse(struct radeon_cs_parser *p) { - uint32_t handle = 0; - bool destroy = false; + int session_idx = -1; + bool destroyed = false; + uint32_t tmp, handle = 0; + uint32_t *size = &tmp; int i, r; while (p->idx < p->chunks[p->chunk_ib_idx].length_dw) { @@ -491,13 +541,29 @@ int radeon_vce_cs_parse(struct radeon_cs_parser *p) return -EINVAL; } + if (destroyed) { + DRM_ERROR("No other command allowed after destroy!\n"); + return -EINVAL; + } + switch (cmd) { case 0x00000001: // session handle = radeon_get_ib_value(p, p->idx + 2); + session_idx = radeon_vce_validate_handle(p, handle); + if (session_idx < 0) + return session_idx; + size = &p->rdev->vce.img_size[session_idx]; break; case 0x00000002: // task info + break; + case 0x01000001: // create + *size = radeon_get_ib_value(p, p->idx + 8) * + radeon_get_ib_value(p, p->idx + 10) * + 8 * 3 / 2; + break; + case 0x04000001: // config extension case 0x04000002: // pic control case 0x04000005: // rate control @@ -506,23 +572,39 @@ int radeon_vce_cs_parse(struct radeon_cs_parser *p) break; case 0x03000001: // encode - r = radeon_vce_cs_reloc(p, p->idx + 10, p->idx + 9); + r = radeon_vce_cs_reloc(p, p->idx + 10, p->idx + 9, + *size); if (r) return r; - r = radeon_vce_cs_reloc(p, p->idx + 12, p->idx + 11); + r = radeon_vce_cs_reloc(p, p->idx + 12, p->idx + 11, + *size / 3); if (r) return r; break; case 0x02000001: // destroy - destroy = true; + destroyed = true; break; case 0x05000001: // context buffer + r = radeon_vce_cs_reloc(p, p->idx + 3, p->idx + 2, + *size * 2); + if (r) + return r; + break; + case 0x05000004: // video bitstream buffer + tmp = radeon_get_ib_value(p, p->idx + 4); + r = radeon_vce_cs_reloc(p, p->idx + 3, p->idx + 2, + tmp); + if (r) + return r; + break; + case 0x05000005: // feedback buffer - r = radeon_vce_cs_reloc(p, p->idx + 3, p->idx + 2); + r = radeon_vce_cs_reloc(p, p->idx + 3, p->idx + 2, + 4096); if (r) return r; break; @@ -532,33 +614,21 @@ int radeon_vce_cs_parse(struct radeon_cs_parser *p) return -EINVAL; } + if (session_idx == -1) { + DRM_ERROR("no session command at start of IB\n"); + return -EINVAL; + } + p->idx += len / 4; } - if (destroy) { + if (destroyed) { /* IB contains a destroy msg, free the handle */ for (i = 0; i < RADEON_MAX_VCE_HANDLES; ++i) atomic_cmpxchg(&p->rdev->vce.handles[i], handle, 0); - - return 0; - } - - /* create or encode, validate the handle */ - for (i = 0; i < RADEON_MAX_VCE_HANDLES; ++i) { - if (atomic_read(&p->rdev->vce.handles[i]) == handle) - return 0; } - /* handle not found try to alloc a new one */ - for (i = 0; i < RADEON_MAX_VCE_HANDLES; ++i) { - if (!atomic_cmpxchg(&p->rdev->vce.handles[i], 0, handle)) { - p->rdev->vce.filp[i] = p->filp; - return 0; - } - } - - DRM_ERROR("No more free VCE handles!\n"); - return -EINVAL; + return 0; } /** -- cgit v1.2.3 From 89d2618dbd114e679b860c3de1df3fe43ee40f6e Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 8 May 2014 18:26:23 -0400 Subject: drm/radeon: fix DCE83 check for mullins MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Mullins is DCE83 just like Kabini. Set the proper number of endpoints on mullins. Signed-off-by: Alex Deucher Signed-off-by: Christian König --- drivers/gpu/drm/radeon/radeon.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 91be3d6eb845..8149e7cf4303 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -2641,7 +2641,8 @@ void r100_pll_errata_after_index(struct radeon_device *rdev); #define ASIC_IS_DCE8(rdev) ((rdev->family >= CHIP_BONAIRE)) #define ASIC_IS_DCE81(rdev) ((rdev->family == CHIP_KAVERI)) #define ASIC_IS_DCE82(rdev) ((rdev->family == CHIP_BONAIRE)) -#define ASIC_IS_DCE83(rdev) ((rdev->family == CHIP_KABINI)) +#define ASIC_IS_DCE83(rdev) ((rdev->family == CHIP_KABINI) || \ + (rdev->family == CHIP_MULLINS)) #define ASIC_IS_LOMBOK(rdev) ((rdev->ddev->pdev->device == 0x6849) || \ (rdev->ddev->pdev->device == 0x6850) || \ -- cgit v1.2.3 From d8ade3526b2aa0505132c404c05a38b73ea15490 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 8 May 2014 20:04:03 -0400 Subject: drm/radeon: handle non-VGA class pci devices with ATRM MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Newer PX systems have non-VGA pci class dGPUs. Update the ATRM fetch method to handle those cases. bug: https://bugzilla.kernel.org/show_bug.cgi?id=75401 Signed-off-by: Alex Deucher Signed-off-by: Christian König Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_bios.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c index b3633d9a5317..9ab30976287d 100644 --- a/drivers/gpu/drm/radeon/radeon_bios.c +++ b/drivers/gpu/drm/radeon/radeon_bios.c @@ -196,6 +196,20 @@ static bool radeon_atrm_get_bios(struct radeon_device *rdev) } } + if (!found) { + while ((pdev = pci_get_class(PCI_CLASS_DISPLAY_OTHER << 8, pdev)) != NULL) { + dhandle = ACPI_HANDLE(&pdev->dev); + if (!dhandle) + continue; + + status = acpi_get_handle(dhandle, "ATRM", &atrm_handle); + if (!ACPI_FAILURE(status)) { + found = true; + break; + } + } + } + if (!found) return false; -- cgit v1.2.3 From 4906f6891ef987637b766dfaef1c6fc95804253a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Mon, 12 May 2014 14:46:11 +0200 Subject: drm/radeon: fix page directory update size estimation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Take padding into account as well. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=75651 Signed-off-by: Christian König Reviewed-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_vm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_vm.c b/drivers/gpu/drm/radeon/radeon_vm.c index 2aae6ce49d32..d9ab99f47612 100644 --- a/drivers/gpu/drm/radeon/radeon_vm.c +++ b/drivers/gpu/drm/radeon/radeon_vm.c @@ -595,7 +595,7 @@ int radeon_vm_update_page_directory(struct radeon_device *rdev, ndw = 64; /* assume the worst case */ - ndw += vm->max_pde_used * 12; + ndw += vm->max_pde_used * 16; /* update too big for an IB */ if (ndw > 0xfffff) -- cgit v1.2.3 From 4b09556660bfe1b43d72ca858524c6baf2c6cb1d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Sat, 10 May 2014 18:17:09 +0200 Subject: drm/radeon: fix buffer placement under memory pressure v2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some buffers (UVD/VM page tables) must be placed in VRAM, but the byte restriction for moving buffers didn't took this into account. v2: keep closer to the original code Signed-off-by: Christian König Reviewed-by: Alex Deucher Reviewed-by: Marek Olšák --- drivers/gpu/drm/radeon/radeon_object.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c index 72705fb40d55..4faa4d6f9bb4 100644 --- a/drivers/gpu/drm/radeon/radeon_object.c +++ b/drivers/gpu/drm/radeon/radeon_object.c @@ -458,7 +458,7 @@ int radeon_bo_list_validate(struct radeon_device *rdev, * into account. We don't want to disallow buffer moves * completely. */ - if (current_domain != RADEON_GEM_DOMAIN_CPU && + if ((lobj->alt_domain & current_domain) != 0 && (domain & current_domain) == 0 && /* will be moved */ bytes_moved > bytes_moved_threshold) { /* don't move it */ -- cgit v1.2.3 From 4955bb073f1be6dd884b5d10041ba4bade6495bf Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 5 May 2014 16:40:42 -0400 Subject: drm/radeon: fix register typo on si MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Probably a copy paste typo. Signed-off-by: Alex Deucher Signed-off-by: Christian König Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/sid.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/sid.h b/drivers/gpu/drm/radeon/sid.h index 683532f84931..7321283602ce 100644 --- a/drivers/gpu/drm/radeon/sid.h +++ b/drivers/gpu/drm/radeon/sid.h @@ -107,8 +107,8 @@ #define SPLL_CHG_STATUS (1 << 1) #define SPLL_CNTL_MODE 0x618 #define SPLL_SW_DIR_CONTROL (1 << 0) -# define SPLL_REFCLK_SEL(x) ((x) << 8) -# define SPLL_REFCLK_SEL_MASK 0xFF00 +# define SPLL_REFCLK_SEL(x) ((x) << 26) +# define SPLL_REFCLK_SEL_MASK (3 << 26) #define CG_SPLL_SPREAD_SPECTRUM 0x620 #define SSEN (1 << 0) -- cgit v1.2.3 From 74ad54f249de39bc040cce7237b1b854a9c6f0ad Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Tue, 13 May 2014 12:50:54 +0200 Subject: drm/radeon: fix typo in finding PLL params MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Otherwise the limit is raised to high. Signed-off-by: Christian König Tested-by: Ken Moffat --- drivers/gpu/drm/radeon/radeon_display.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 408b6ac53f0b..f00dbbf4d806 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -999,7 +999,7 @@ void radeon_compute_pll_avivo(struct radeon_pll *pll, /* avoid high jitter with small fractional dividers */ if (pll->flags & RADEON_PLL_USE_FRAC_FB_DIV && (fb_div % 10)) { - fb_div_min = max(fb_div_min, (9 - (fb_div % 10)) * 20 + 60); + fb_div_min = max(fb_div_min, (9 - (fb_div % 10)) * 20 + 50); if (fb_div < fb_div_min) { unsigned tmp = DIV_ROUND_UP(fb_div_min, fb_div); fb_div *= tmp; -- cgit v1.2.3 From 24f47acc78b0ab5e2201f859fe1f693ae90c7c83 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=A9r=C3=B4me=20Glisse?= Date: Wed, 7 May 2014 16:35:24 -0400 Subject: drm/radeon: avoid segfault on device open when accel is not working. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When accel is not working on device with virtual address space radeon segfault because the ib buffer is NULL and trying to map it inside the virtual address space trigger segfault. This patch only map the ib buffer if accel is working. Cc: Signed-off-by: Jérôme Glisse Reviewed-by: Alex Deucher Signed-off-by: Christian König --- drivers/gpu/drm/radeon/radeon_kms.c | 55 +++++++++++++++++++------------------ 1 file changed, 29 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c index 0cc47f12d995..eaaedba04675 100644 --- a/drivers/gpu/drm/radeon/radeon_kms.c +++ b/drivers/gpu/drm/radeon/radeon_kms.c @@ -577,28 +577,29 @@ int radeon_driver_open_kms(struct drm_device *dev, struct drm_file *file_priv) return r; } - r = radeon_bo_reserve(rdev->ring_tmp_bo.bo, false); - if (r) { - radeon_vm_fini(rdev, &fpriv->vm); - kfree(fpriv); - return r; - } + if (rdev->accel_working) { + r = radeon_bo_reserve(rdev->ring_tmp_bo.bo, false); + if (r) { + radeon_vm_fini(rdev, &fpriv->vm); + kfree(fpriv); + return r; + } - /* map the ib pool buffer read only into - * virtual address space */ - bo_va = radeon_vm_bo_add(rdev, &fpriv->vm, - rdev->ring_tmp_bo.bo); - r = radeon_vm_bo_set_addr(rdev, bo_va, RADEON_VA_IB_OFFSET, - RADEON_VM_PAGE_READABLE | - RADEON_VM_PAGE_SNOOPED); + /* map the ib pool buffer read only into + * virtual address space */ + bo_va = radeon_vm_bo_add(rdev, &fpriv->vm, + rdev->ring_tmp_bo.bo); + r = radeon_vm_bo_set_addr(rdev, bo_va, RADEON_VA_IB_OFFSET, + RADEON_VM_PAGE_READABLE | + RADEON_VM_PAGE_SNOOPED); - radeon_bo_unreserve(rdev->ring_tmp_bo.bo); - if (r) { - radeon_vm_fini(rdev, &fpriv->vm); - kfree(fpriv); - return r; + radeon_bo_unreserve(rdev->ring_tmp_bo.bo); + if (r) { + radeon_vm_fini(rdev, &fpriv->vm); + kfree(fpriv); + return r; + } } - file_priv->driver_priv = fpriv; } @@ -626,13 +627,15 @@ void radeon_driver_postclose_kms(struct drm_device *dev, struct radeon_bo_va *bo_va; int r; - r = radeon_bo_reserve(rdev->ring_tmp_bo.bo, false); - if (!r) { - bo_va = radeon_vm_bo_find(&fpriv->vm, - rdev->ring_tmp_bo.bo); - if (bo_va) - radeon_vm_bo_rmv(rdev, bo_va); - radeon_bo_unreserve(rdev->ring_tmp_bo.bo); + if (rdev->accel_working) { + r = radeon_bo_reserve(rdev->ring_tmp_bo.bo, false); + if (!r) { + bo_va = radeon_vm_bo_find(&fpriv->vm, + rdev->ring_tmp_bo.bo); + if (bo_va) + radeon_vm_bo_rmv(rdev, bo_va); + radeon_bo_unreserve(rdev->ring_tmp_bo.bo); + } } radeon_vm_fini(rdev, &fpriv->vm); -- cgit v1.2.3 From 4f2f203976964e267dc477de6648bdb3acd2b74b Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 19 May 2014 19:21:29 -0400 Subject: drm/radeon/pm: don't allow debugfs/sysfs access when PX card is off (v2) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When the PX card is off don't try and access it. Avoid hw access to the card while it's off (e.g., reading back invalid temperature). v2: be less strict bug: https://bugzilla.kernel.org/show_bug.cgi?id=76321 Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Christian König --- drivers/gpu/drm/radeon/radeon_pm.c | 42 +++++++++++++++++++++++++++++++++++++- 1 file changed, 41 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c index f30b8426eee2..53d6e1bb48dc 100644 --- a/drivers/gpu/drm/radeon/radeon_pm.c +++ b/drivers/gpu/drm/radeon/radeon_pm.c @@ -361,6 +361,11 @@ static ssize_t radeon_set_pm_profile(struct device *dev, struct drm_device *ddev = dev_get_drvdata(dev); struct radeon_device *rdev = ddev->dev_private; + /* Can't set profile when the card is off */ + if ((rdev->flags & RADEON_IS_PX) && + (ddev->switch_power_state != DRM_SWITCH_POWER_ON)) + return -EINVAL; + mutex_lock(&rdev->pm.mutex); if (rdev->pm.pm_method == PM_METHOD_PROFILE) { if (strncmp("default", buf, strlen("default")) == 0) @@ -409,6 +414,13 @@ static ssize_t radeon_set_pm_method(struct device *dev, struct drm_device *ddev = dev_get_drvdata(dev); struct radeon_device *rdev = ddev->dev_private; + /* Can't set method when the card is off */ + if ((rdev->flags & RADEON_IS_PX) && + (ddev->switch_power_state != DRM_SWITCH_POWER_ON)) { + count = -EINVAL; + goto fail; + } + /* we don't support the legacy modes with dpm */ if (rdev->pm.pm_method == PM_METHOD_DPM) { count = -EINVAL; @@ -446,6 +458,10 @@ static ssize_t radeon_get_dpm_state(struct device *dev, struct radeon_device *rdev = ddev->dev_private; enum radeon_pm_state_type pm = rdev->pm.dpm.user_state; + if ((rdev->flags & RADEON_IS_PX) && + (ddev->switch_power_state != DRM_SWITCH_POWER_ON)) + return snprintf(buf, PAGE_SIZE, "off\n"); + return snprintf(buf, PAGE_SIZE, "%s\n", (pm == POWER_STATE_TYPE_BATTERY) ? "battery" : (pm == POWER_STATE_TYPE_BALANCED) ? "balanced" : "performance"); @@ -459,6 +475,11 @@ static ssize_t radeon_set_dpm_state(struct device *dev, struct drm_device *ddev = dev_get_drvdata(dev); struct radeon_device *rdev = ddev->dev_private; + /* Can't set dpm state when the card is off */ + if ((rdev->flags & RADEON_IS_PX) && + (ddev->switch_power_state != DRM_SWITCH_POWER_ON)) + return -EINVAL; + mutex_lock(&rdev->pm.mutex); if (strncmp("battery", buf, strlen("battery")) == 0) rdev->pm.dpm.user_state = POWER_STATE_TYPE_BATTERY; @@ -485,6 +506,10 @@ static ssize_t radeon_get_dpm_forced_performance_level(struct device *dev, struct radeon_device *rdev = ddev->dev_private; enum radeon_dpm_forced_level level = rdev->pm.dpm.forced_level; + if ((rdev->flags & RADEON_IS_PX) && + (ddev->switch_power_state != DRM_SWITCH_POWER_ON)) + return snprintf(buf, PAGE_SIZE, "off\n"); + return snprintf(buf, PAGE_SIZE, "%s\n", (level == RADEON_DPM_FORCED_LEVEL_AUTO) ? "auto" : (level == RADEON_DPM_FORCED_LEVEL_LOW) ? "low" : "high"); @@ -500,6 +525,11 @@ static ssize_t radeon_set_dpm_forced_performance_level(struct device *dev, enum radeon_dpm_forced_level level; int ret = 0; + /* Can't force performance level when the card is off */ + if ((rdev->flags & RADEON_IS_PX) && + (ddev->switch_power_state != DRM_SWITCH_POWER_ON)) + return -EINVAL; + mutex_lock(&rdev->pm.mutex); if (strncmp("low", buf, strlen("low")) == 0) { level = RADEON_DPM_FORCED_LEVEL_LOW; @@ -538,8 +568,14 @@ static ssize_t radeon_hwmon_show_temp(struct device *dev, char *buf) { struct radeon_device *rdev = dev_get_drvdata(dev); + struct drm_device *ddev = rdev->ddev; int temp; + /* Can't get temperature when the card is off */ + if ((rdev->flags & RADEON_IS_PX) && + (ddev->switch_power_state != DRM_SWITCH_POWER_ON)) + return -EINVAL; + if (rdev->asic->pm.get_temperature) temp = radeon_get_temperature(rdev); else @@ -1614,8 +1650,12 @@ static int radeon_debugfs_pm_info(struct seq_file *m, void *data) struct drm_info_node *node = (struct drm_info_node *) m->private; struct drm_device *dev = node->minor->dev; struct radeon_device *rdev = dev->dev_private; + struct drm_device *ddev = rdev->ddev; - if (rdev->pm.dpm_enabled) { + if ((rdev->flags & RADEON_IS_PX) && + (ddev->switch_power_state != DRM_SWITCH_POWER_ON)) { + seq_printf(m, "PX asic powered off\n"); + } else if (rdev->pm.dpm_enabled) { mutex_lock(&rdev->pm.mutex); if (rdev->asic->dpm.debugfs_print_current_performance_level) radeon_dpm_debugfs_print_current_performance_level(rdev, m); -- cgit v1.2.3 From 0b5a958cf4df3a5cd578b861471e62138f55c85e Mon Sep 17 00:00:00 2001 From: Stephane Grosjean Date: Tue, 20 May 2014 11:38:56 +0200 Subject: can: peak_pci: prevent use after free at netdev removal As remarked by Christopher R. Baker in his post at http://marc.info/?l=linux-can&m=139707295706465&w=2 there's a possibility for an use after free condition at device removal. This simplified patch introduces an additional variable to prevent the issue. Thanks for catching this. Cc: linux-stable Reported-by: Christopher R. Baker Signed-off-by: Stephane Grosjean Signed-off-by: Marc Kleine-Budde --- drivers/net/can/sja1000/peak_pci.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/sja1000/peak_pci.c b/drivers/net/can/sja1000/peak_pci.c index c540e3d12e3d..564933ae218c 100644 --- a/drivers/net/can/sja1000/peak_pci.c +++ b/drivers/net/can/sja1000/peak_pci.c @@ -551,7 +551,7 @@ static int peak_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { struct sja1000_priv *priv; struct peak_pci_chan *chan; - struct net_device *dev; + struct net_device *dev, *prev_dev; void __iomem *cfg_base, *reg_base; u16 sub_sys_id, icr; int i, err, channels; @@ -688,11 +688,13 @@ failure_remove_channels: writew(0x0, cfg_base + PITA_ICR + 2); chan = NULL; - for (dev = pci_get_drvdata(pdev); dev; dev = chan->prev_dev) { - unregister_sja1000dev(dev); - free_sja1000dev(dev); + for (dev = pci_get_drvdata(pdev); dev; dev = prev_dev) { priv = netdev_priv(dev); chan = priv->priv; + prev_dev = chan->prev_dev; + + unregister_sja1000dev(dev); + free_sja1000dev(dev); } /* free any PCIeC resources too */ @@ -726,10 +728,12 @@ static void peak_pci_remove(struct pci_dev *pdev) /* Loop over all registered devices */ while (1) { + struct net_device *prev_dev = chan->prev_dev; + dev_info(&pdev->dev, "removing device %s\n", dev->name); unregister_sja1000dev(dev); free_sja1000dev(dev); - dev = chan->prev_dev; + dev = prev_dev; if (!dev) { /* do that only for first channel */ -- cgit v1.2.3 From 5a9a55bf9157d3490b0c8c4c81d4708602c26e07 Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Wed, 21 May 2014 14:02:35 -0700 Subject: dma: mv_xor: Flush descriptors before activating a channel We need to use writel() instead of writel_relaxed() when starting a channel, to ensure all the descriptors have been flushed before the activation. While at it, remove the unneeded read-modify-write and make the code simpler. Cc: Signed-off-by: Lior Amsalem Signed-off-by: Ezequiel Garcia Signed-off-by: Dan Williams --- drivers/dma/mv_xor.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c index 766b68ed505c..394cbc5c93e3 100644 --- a/drivers/dma/mv_xor.c +++ b/drivers/dma/mv_xor.c @@ -191,12 +191,10 @@ static void mv_set_mode(struct mv_xor_chan *chan, static void mv_chan_activate(struct mv_xor_chan *chan) { - u32 activation; - dev_dbg(mv_chan_to_devp(chan), " activate chan.\n"); - activation = readl_relaxed(XOR_ACTIVATION(chan)); - activation |= 0x1; - writel_relaxed(activation, XOR_ACTIVATION(chan)); + + /* writel ensures all descriptors are flushed before activation */ + writel(BIT(0), XOR_ACTIVATION(chan)); } static char mv_chan_is_busy(struct mv_xor_chan *chan) -- cgit v1.2.3 From c1f43dd9c20d85e66c4d77e284f64ac114abe3f8 Mon Sep 17 00:00:00 2001 From: Xuelin Shi Date: Wed, 21 May 2014 14:02:37 -0700 Subject: dmaengine: fix dmaengine_unmap failure The count which is used to get_unmap_data maybe not the same as the count computed in dmaengine_unmap which causes to free data in a wrong pool. This patch fixes this issue by keeping the map count with unmap_data structure and use this count to get the pool. Cc: Signed-off-by: Xuelin Shi Signed-off-by: Dan Williams --- drivers/dma/dmaengine.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index a886713937fd..d5d30ed863ce 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -1009,6 +1009,7 @@ static void dmaengine_unmap(struct kref *kref) dma_unmap_page(dev, unmap->addr[i], unmap->len, DMA_BIDIRECTIONAL); } + cnt = unmap->map_cnt; mempool_free(unmap, __get_unmap_pool(cnt)->pool); } @@ -1074,6 +1075,7 @@ dmaengine_get_unmap_data(struct device *dev, int nr, gfp_t flags) memset(unmap, 0, sizeof(*unmap)); kref_init(&unmap->kref); unmap->dev = dev; + unmap->map_cnt = nr; return unmap; } -- cgit v1.2.3 From 89df20d951b310f3e33422554054ae6e58a3c7a9 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 20 May 2014 11:38:18 +0200 Subject: stmmac: Remove unbalanced clk_disable call The stmmac_open call was calling clk_disable_unprepare on phy init failure, but it never calls clk_prepare_enable, this causes a WARN_ON in the clk framework to trigger if for some reason phy init fails. Signed-off-by: Hans de Goede Acked-by: Giuseppe Cavallaro Acked-by: Chen-Yu Tsai Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index d940034acdd4..0f4841d2e8dc 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -1704,7 +1704,7 @@ static int stmmac_open(struct net_device *dev) if (ret) { pr_err("%s: Cannot attach to PHY (error: %d)\n", __func__, ret); - goto phy_error; + return ret; } } @@ -1779,8 +1779,6 @@ init_error: dma_desc_error: if (priv->phydev) phy_disconnect(priv->phydev); -phy_error: - clk_disable_unprepare(priv->stmmac_clk); return ret; } -- cgit v1.2.3 From d6b694c0b3f20c3ee54d29d4109fa1978d11a033 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Wed, 21 May 2014 11:24:39 -0400 Subject: bonding: Don't assume 802.1Q when sending alb learning packets. TLB/ALB learning packets always assume 802.1Q vlan protocol, but that is no longer the case since we now have support for Q-in-Q on top of bonding. Pass the vlan protocol to alb_send_lp_vid() so that the packets are properly tagged. CC: Jay Vosburgh CC: Veaceslav Falico CC: Andy Gospodarek Signed-off-by: Vlad Yasevich Acked-by: Veaceslav Falico Signed-off-by: David S. Miller --- drivers/net/bonding/bond_alb.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c index e53847884319..2ec945c3b9ba 100644 --- a/drivers/net/bonding/bond_alb.c +++ b/drivers/net/bonding/bond_alb.c @@ -995,7 +995,7 @@ static void rlb_clear_vlan(struct bonding *bond, unsigned short vlan_id) /*********************** tlb/rlb shared functions *********************/ static void alb_send_lp_vid(struct slave *slave, u8 mac_addr[], - u16 vid) + __be16 vlan_proto, u16 vid) { struct learning_pkt pkt; struct sk_buff *skb; @@ -1021,7 +1021,7 @@ static void alb_send_lp_vid(struct slave *slave, u8 mac_addr[], skb->dev = slave->dev; if (vid) { - skb = vlan_put_tag(skb, htons(ETH_P_8021Q), vid); + skb = vlan_put_tag(skb, vlan_proto, vid); if (!skb) { pr_err("%s: Error: failed to insert VLAN tag\n", slave->bond->dev->name); @@ -1040,13 +1040,14 @@ static void alb_send_learning_packets(struct slave *slave, u8 mac_addr[]) struct list_head *iter; /* send untagged */ - alb_send_lp_vid(slave, mac_addr, 0); + alb_send_lp_vid(slave, mac_addr, 0, 0); /* loop through vlans and send one packet for each */ rcu_read_lock(); netdev_for_each_all_upper_dev_rcu(bond->dev, upper, iter) { if (is_vlan_dev(upper) && vlan_get_encap_level(upper) == 0) alb_send_lp_vid(slave, mac_addr, + vlan_dev_vlan_proto(upper), vlan_dev_vlan_id(upper)); } rcu_read_unlock(); -- cgit v1.2.3 From d0c21d43a5a12aaebb1e42e10cf78e6491fc9e5a Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Wed, 21 May 2014 13:19:48 -0400 Subject: bonding: Send ALB learning packets using the right source ALB learning packets are currentlyalways sent using the slave mac address for all vlans configured on top of bond. This is not always correct, as vlans may change their mac address. This patch introduced a concept of strict matching where the source of learning packets can either strictly match the address passed in, or it can determine a more correct address to use. There are 3 casese to consider: 1) Switchover. In this case, we have a new active slave and we need tell the switch about all addresses available on the slave. 2) Monitor. We'll periodically refresh learning info for all slaves. In this case, we refresh all addresses for current active, and just the slave address for other slaves. 3) Teaching of disabled adddress. This happens as part of the failover and in this case, we alwyas to use just the address provided. CC: Jay Vosburgh CC: Veaceslav Falico CC: Andy Gospodarek Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller --- drivers/net/bonding/bond_alb.c | 49 ++++++++++++++++++++++++++++++------------ 1 file changed, 35 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c index 2ec945c3b9ba..93580a47cc54 100644 --- a/drivers/net/bonding/bond_alb.c +++ b/drivers/net/bonding/bond_alb.c @@ -82,7 +82,8 @@ static inline struct arp_pkt *arp_pkt(const struct sk_buff *skb) } /* Forward declaration */ -static void alb_send_learning_packets(struct slave *slave, u8 mac_addr[]); +static void alb_send_learning_packets(struct slave *slave, u8 mac_addr[], + bool strict_match); static void rlb_purge_src_ip(struct bonding *bond, struct arp_pkt *arp); static void rlb_src_unlink(struct bonding *bond, u32 index); static void rlb_src_link(struct bonding *bond, u32 ip_src_hash, @@ -459,7 +460,7 @@ static void rlb_teach_disabled_mac_on_primary(struct bonding *bond, u8 addr[]) bond->alb_info.rlb_promisc_timeout_counter = 0; - alb_send_learning_packets(bond->curr_active_slave, addr); + alb_send_learning_packets(bond->curr_active_slave, addr, true); } /* slave being removed should not be active at this point @@ -1032,8 +1033,8 @@ static void alb_send_lp_vid(struct slave *slave, u8 mac_addr[], dev_queue_xmit(skb); } - -static void alb_send_learning_packets(struct slave *slave, u8 mac_addr[]) +static void alb_send_learning_packets(struct slave *slave, u8 mac_addr[], + bool strict_match) { struct bonding *bond = bond_get_bond_by_slave(slave); struct net_device *upper; @@ -1045,10 +1046,19 @@ static void alb_send_learning_packets(struct slave *slave, u8 mac_addr[]) /* loop through vlans and send one packet for each */ rcu_read_lock(); netdev_for_each_all_upper_dev_rcu(bond->dev, upper, iter) { - if (is_vlan_dev(upper) && vlan_get_encap_level(upper) == 0) - alb_send_lp_vid(slave, mac_addr, - vlan_dev_vlan_proto(upper), - vlan_dev_vlan_id(upper)); + if (is_vlan_dev(upper) && vlan_get_encap_level(upper) == 0) { + if (strict_match && + ether_addr_equal_64bits(mac_addr, + upper->dev_addr)) { + alb_send_lp_vid(slave, mac_addr, + vlan_dev_vlan_proto(upper), + vlan_dev_vlan_id(upper)); + } else if (!strict_match) { + alb_send_lp_vid(slave, upper->dev_addr, + vlan_dev_vlan_proto(upper), + vlan_dev_vlan_id(upper)); + } + } } rcu_read_unlock(); } @@ -1108,7 +1118,7 @@ static void alb_fasten_mac_swap(struct bonding *bond, struct slave *slave1, /* fasten the change in the switch */ if (SLAVE_IS_OK(slave1)) { - alb_send_learning_packets(slave1, slave1->dev->dev_addr); + alb_send_learning_packets(slave1, slave1->dev->dev_addr, false); if (bond->alb_info.rlb_enabled) { /* inform the clients that the mac address * has changed @@ -1120,7 +1130,7 @@ static void alb_fasten_mac_swap(struct bonding *bond, struct slave *slave1, } if (SLAVE_IS_OK(slave2)) { - alb_send_learning_packets(slave2, slave2->dev->dev_addr); + alb_send_learning_packets(slave2, slave2->dev->dev_addr, false); if (bond->alb_info.rlb_enabled) { /* inform the clients that the mac address * has changed @@ -1491,6 +1501,8 @@ void bond_alb_monitor(struct work_struct *work) /* send learning packets */ if (bond_info->lp_counter >= BOND_ALB_LP_TICKS(bond)) { + bool strict_match; + /* change of curr_active_slave involves swapping of mac addresses. * in order to avoid this swapping from happening while * sending the learning packets, the curr_slave_lock must be held for @@ -1498,8 +1510,15 @@ void bond_alb_monitor(struct work_struct *work) */ read_lock(&bond->curr_slave_lock); - bond_for_each_slave_rcu(bond, slave, iter) - alb_send_learning_packets(slave, slave->dev->dev_addr); + bond_for_each_slave_rcu(bond, slave, iter) { + /* If updating current_active, use all currently + * user mac addreses (!strict_match). Otherwise, only + * use mac of the slave device. + */ + strict_match = (slave != bond->curr_active_slave); + alb_send_learning_packets(slave, slave->dev->dev_addr, + strict_match); + } read_unlock(&bond->curr_slave_lock); @@ -1722,7 +1741,8 @@ void bond_alb_handle_active_change(struct bonding *bond, struct slave *new_slave } else { /* set the new_slave to the bond mac address */ alb_set_slave_mac_addr(new_slave, bond->dev->dev_addr); - alb_send_learning_packets(new_slave, bond->dev->dev_addr); + alb_send_learning_packets(new_slave, bond->dev->dev_addr, + false); } write_lock_bh(&bond->curr_slave_lock); @@ -1765,7 +1785,8 @@ int bond_alb_set_mac_address(struct net_device *bond_dev, void *addr) alb_set_slave_mac_addr(bond->curr_active_slave, bond_dev->dev_addr); read_lock(&bond->lock); - alb_send_learning_packets(bond->curr_active_slave, bond_dev->dev_addr); + alb_send_learning_packets(bond->curr_active_slave, + bond_dev->dev_addr, false); if (bond->alb_info.rlb_enabled) { /* inform clients mac address has changed */ rlb_req_update_slave_clients(bond, bond->curr_active_slave); -- cgit v1.2.3 From 6aa6caff30f5dcb9e55b03b9710c30b83750cae5 Mon Sep 17 00:00:00 2001 From: Joe Lawrence Date: Thu, 22 May 2014 17:30:54 -0400 Subject: [SCSI] scsi_transport_sas: move bsg destructor into sas_rphy_remove The recent change in sysfs, bcdde7e221a8750f9b62b6d0bd31b72ea4ad9309 "sysfs: make __sysfs_remove_dir() recursive" revealed an asymmetric rphy device creation/deletion sequence in scsi_transport_sas: modprobe mpt2sas sas_rphy_add device_add A rphy->dev device_add B sas_device transport class device_add C sas_end_device transport class device_add D bsg class rmmod mpt2sas sas_rphy_delete sas_rphy_remove device_del B device_del C device_del A sysfs_remove_group recursive sysfs dir removal sas_rphy_free device_del D warning where device A is the parent of B, C, and D. When sas_rphy_free tries to unregister the bsg request queue (device D above), the ensuing sysfs cleanup discovers that its sysfs group has already been removed and emits a warning, "sysfs group... not found for kobject 'end_device-X:0'". Since bsg creation is a side effect of sas_rphy_add, move its complementary removal call into sas_rphy_remove. This imposes the following tear-down order for the devices above: D, B, C, A. Note the sas_device and sas_end_device transport class devices (B and C above) are created and destroyed both via the list match traversal in attribute_container_device_trigger, so the order in which they are handled is fixed. This is fine as long as they are deleted before their parent device. Signed-off-by: Joe Lawrence Acked-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/scsi_transport_sas.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c index 1b681427dde0..c341f855fadc 100644 --- a/drivers/scsi/scsi_transport_sas.c +++ b/drivers/scsi/scsi_transport_sas.c @@ -1621,8 +1621,6 @@ void sas_rphy_free(struct sas_rphy *rphy) list_del(&rphy->list); mutex_unlock(&sas_host->lock); - sas_bsg_remove(shost, rphy); - transport_destroy_device(dev); put_device(dev); @@ -1681,6 +1679,7 @@ sas_rphy_remove(struct sas_rphy *rphy) } sas_rphy_unlink(rphy); + sas_bsg_remove(NULL, rphy); transport_remove_device(dev); device_del(dev); } -- cgit v1.2.3 From 59cf4243e557aa64ab2ef51280454aa1f3828e14 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 25 May 2014 17:23:08 +0200 Subject: hwmon: (ntc_thermistor) Fix dependencies In commit 9e8269de, support was added for ntc_thermistor devices being declared in the device tree and implemented on top of IIO. With that change, a dependency was added to the ntc_thermistor driver: depends on (!OF && !IIO) || (OF && IIO) This construct has the drawback that the driver can no longer be selected when OF is set and IIO isn't, nor when IIO is set and OF is not. This is a regression for the original users of the driver. As the new code depends on IIO and is useless without OF, include it only if both are enabled, and set the dependencies accordingly. This is clearer, more simple and more correct. Signed-off-by: Jean Delvare Fixes: 9e8269de hwmon: (ntc_thermistor) Add DT with IIO support to NTC thermistor driver Reviewed-by: Guenter Roeck Cc: Naveen Krishna Chatradhi Cc: Doug Anderson --- drivers/hwmon/Kconfig | 2 +- drivers/hwmon/ntc_thermistor.c | 4 +++- 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index bc196f49ec53..4af0da96c2e2 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -1053,7 +1053,7 @@ config SENSORS_PC87427 config SENSORS_NTC_THERMISTOR tristate "NTC thermistor support" - depends on (!OF && !IIO) || (OF && IIO) + depends on !OF || IIO=n || IIO help This driver supports NTC thermistors sensor reading and its interpretation. The driver can also monitor the temperature and diff --git a/drivers/hwmon/ntc_thermistor.c b/drivers/hwmon/ntc_thermistor.c index 8a17f01e8672..6b4413ce4d39 100644 --- a/drivers/hwmon/ntc_thermistor.c +++ b/drivers/hwmon/ntc_thermistor.c @@ -141,7 +141,7 @@ struct ntc_data { char name[PLATFORM_NAME_SIZE]; }; -#ifdef CONFIG_OF +#if defined(CONFIG_OF) && IS_ENABLED(CONFIG_IIO) static int ntc_adc_iio_read(struct ntc_thermistor_platform_data *pdata) { struct iio_channel *channel = pdata->chan; @@ -223,6 +223,8 @@ ntc_thermistor_parse_dt(struct platform_device *pdev) return NULL; } +#define ntc_match NULL + static void ntc_iio_channel_release(struct ntc_thermistor_platform_data *pdata) { } #endif -- cgit v1.2.3 From ead82d6792ef5c600d535bca6ec50a4da14ff7c7 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 25 May 2014 17:23:08 +0200 Subject: hwmon: (ntc_thermistor) Fix OF device ID mapping The mapping from OF device IDs to platform device IDs is wrong. TYPE_NCPXXWB473 is 0, TYPE_NCPXXWL333 is 1, so ntc_thermistor_id[TYPE_NCPXXWB473] is { "ncp15wb473", TYPE_NCPXXWB473 } while ntc_thermistor_id[TYPE_NCPXXWL333] is { "ncp18wb473", TYPE_NCPXXWB473 }. So the name is wrong for all but the "ntc,ncp15wb473" entry, and the type is wrong for the "ntc,ncp15wl333" entry. So map the entries by index, it is neither elegant nor robust but at least it is correct. Signed-off-by: Jean Delvare Fixes: 9e8269de hwmon: (ntc_thermistor) Add DT with IIO support to NTC thermistor driver Reviewed-by: Guenter Roeck Cc: Naveen Krishna Chatradhi Cc: Doug Anderson --- drivers/hwmon/ntc_thermistor.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/ntc_thermistor.c b/drivers/hwmon/ntc_thermistor.c index 6b4413ce4d39..e76feb86a1d4 100644 --- a/drivers/hwmon/ntc_thermistor.c +++ b/drivers/hwmon/ntc_thermistor.c @@ -44,6 +44,7 @@ struct ntc_compensation { unsigned int ohm; }; +/* Order matters, ntc_match references the entries by index */ static const struct platform_device_id ntc_thermistor_id[] = { { "ncp15wb473", TYPE_NCPXXWB473 }, { "ncp18wb473", TYPE_NCPXXWB473 }, @@ -163,15 +164,15 @@ static int ntc_adc_iio_read(struct ntc_thermistor_platform_data *pdata) static const struct of_device_id ntc_match[] = { { .compatible = "ntc,ncp15wb473", - .data = &ntc_thermistor_id[TYPE_NCPXXWB473] }, + .data = &ntc_thermistor_id[0] }, { .compatible = "ntc,ncp18wb473", - .data = &ntc_thermistor_id[TYPE_NCPXXWB473] }, + .data = &ntc_thermistor_id[1] }, { .compatible = "ntc,ncp21wb473", - .data = &ntc_thermistor_id[TYPE_NCPXXWB473] }, + .data = &ntc_thermistor_id[2] }, { .compatible = "ntc,ncp03wb473", - .data = &ntc_thermistor_id[TYPE_NCPXXWB473] }, + .data = &ntc_thermistor_id[3] }, { .compatible = "ntc,ncp15wl333", - .data = &ntc_thermistor_id[TYPE_NCPXXWL333] }, + .data = &ntc_thermistor_id[4] }, { }, }; MODULE_DEVICE_TABLE(of, ntc_match); -- cgit v1.2.3 From 72013795a73f8536d3346fa90379c987bcad0cc8 Mon Sep 17 00:00:00 2001 From: Lan Tianyu Date: Tue, 20 May 2014 20:59:21 +0800 Subject: ACPI: Add acpi_bus_attach_private_data() to attach data to ACPI handle There is already acpi_bus_get_private_data() to get ACPI handle data which is associated with acpi_bus_private_data_handler(). This patch is to add acpi_bus_attach_private_data() to make a pair and facilitate to attach and get data to/from ACPI handle. Reviewed-by: Mika Westerberg Signed-off-by: Lan Tianyu Signed-off-by: Rafael J. Wysocki --- drivers/acpi/bus.c | 28 ++++++++++++++++++++++++---- 1 file changed, 24 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index cf925c4f36b7..8445d570f60a 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -132,6 +132,21 @@ void acpi_bus_private_data_handler(acpi_handle handle, } EXPORT_SYMBOL(acpi_bus_private_data_handler); +int acpi_bus_attach_private_data(acpi_handle handle, void *data) +{ + acpi_status status; + + status = acpi_attach_data(handle, + acpi_bus_private_data_handler, data); + if (ACPI_FAILURE(status)) { + acpi_handle_debug(handle, "Error attaching device data\n"); + return -ENODEV; + } + + return 0; +} +EXPORT_SYMBOL_GPL(acpi_bus_attach_private_data); + int acpi_bus_get_private_data(acpi_handle handle, void **data) { acpi_status status; @@ -140,15 +155,20 @@ int acpi_bus_get_private_data(acpi_handle handle, void **data) return -EINVAL; status = acpi_get_data(handle, acpi_bus_private_data_handler, data); - if (ACPI_FAILURE(status) || !*data) { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No context for object [%p]\n", - handle)); + if (ACPI_FAILURE(status)) { + acpi_handle_debug(handle, "No context for object\n"); return -ENODEV; } return 0; } -EXPORT_SYMBOL(acpi_bus_get_private_data); +EXPORT_SYMBOL_GPL(acpi_bus_get_private_data); + +void acpi_bus_detach_private_data(acpi_handle handle) +{ + acpi_detach_data(handle, acpi_bus_private_data_handler); +} +EXPORT_SYMBOL_GPL(acpi_bus_detach_private_data); void acpi_bus_no_hotplug(acpi_handle handle) { -- cgit v1.2.3 From e6f8a4d60b905eae1a20cbb0c72c67b26b2f02fd Mon Sep 17 00:00:00 2001 From: Lan Tianyu Date: Tue, 20 May 2014 20:59:22 +0800 Subject: ACPI / thermal: Use acpi_bus_attach_private_data() to attach private data Use acpi_bus_attach_private_data() to attach private data instead of acpi_attach_data(). Reviewed-by: Mika Westerberg Signed-off-by: Lan Tianyu Signed-off-by: Rafael J. Wysocki --- drivers/acpi/thermal.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index c1e31a41f949..ae195fde858d 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -925,13 +925,10 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz) if (result) return result; - status = acpi_attach_data(tz->device->handle, - acpi_bus_private_data_handler, - tz->thermal_zone); - if (ACPI_FAILURE(status)) { - pr_err(PREFIX "Error attaching device data\n"); + status = acpi_bus_attach_private_data(tz->device->handle, + tz->thermal_zone); + if (ACPI_FAILURE(status)) return -ENODEV; - } tz->tz_enabled = 1; @@ -946,7 +943,7 @@ static void acpi_thermal_unregister_thermal_zone(struct acpi_thermal *tz) sysfs_remove_link(&tz->thermal_zone->device.kobj, "device"); thermal_zone_device_unregister(tz->thermal_zone); tz->thermal_zone = NULL; - acpi_detach_data(tz->device->handle, acpi_bus_private_data_handler); + acpi_bus_detach_private_data(tz->device->handle); } -- cgit v1.2.3