From 1394f03221790a988afc3e4b3cb79f2e477246a9 Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Sun, 6 May 2007 14:50:22 -0700 Subject: blackfin architecture This adds support for the Analog Devices Blackfin processor architecture, and currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561 (Dual Core) devices, with a variety of development platforms including those avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP, BF561-EZKIT), and Bluetechnix! Tinyboards. The Blackfin architecture was jointly developed by Intel and Analog Devices Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in December of 2000. Since then ADI has put this core into its Blackfin processor family of devices. The Blackfin core has the advantages of a clean, orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC (Multiply/Accumulate), state-of-the-art signal processing engine and single-instruction, multiple-data (SIMD) multimedia capabilities into a single instruction-set architecture. The Blackfin architecture, including the instruction set, is described by the ADSP-BF53x/BF56x Blackfin Processor Programming Reference http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf The Blackfin processor is already supported by major releases of gcc, and there are binary and source rpms/tarballs for many architectures at: http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete documentation, including "getting started" guides available at: http://docs.blackfin.uclinux.org/ which provides links to the sources and patches you will need in order to set up a cross-compiling environment for bfin-linux-uclibc This patch, as well as the other patches (toolchain, distribution, uClibc) are actively supported by Analog Devices Inc, at: http://blackfin.uclinux.org/ We have tested this on LTP, and our test plan (including pass/fails) can be found at: http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel [m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files] Signed-off-by: Bryan Wu Signed-off-by: Mariusz Kozlowski Signed-off-by: Aubrey Li Signed-off-by: Jie Zhang Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-blackfin/io.h | 207 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 207 insertions(+) create mode 100644 include/asm-blackfin/io.h (limited to 'include/asm-blackfin/io.h') diff --git a/include/asm-blackfin/io.h b/include/asm-blackfin/io.h new file mode 100644 index 000000000000..7e6995e80d97 --- /dev/null +++ b/include/asm-blackfin/io.h @@ -0,0 +1,207 @@ +#ifndef _BFIN_IO_H +#define _BFIN_IO_H + +#ifdef __KERNEL__ + +#ifndef __ASSEMBLY__ +#include +#endif +#include + +/* + * These are for ISA/PCI shared memory _only_ and should never be used + * on any other type of memory, including Zorro memory. They are meant to + * access the bus in the bus byte order which is little-endian!. + * + * readX/writeX() are used to access memory mapped devices. On some + * architectures the memory mapped IO stuff needs to be accessed + * differently. On the bfin architecture, we just read/write the + * memory location directly. + */ +#ifndef __ASSEMBLY__ + +static inline unsigned char readb(void __iomem *addr) +{ + unsigned int val; + int tmp; + + __asm__ __volatile__ ("cli %1;\n\t" + "NOP; NOP; SSYNC;\n\t" + "%0 = b [%2] (z);\n\t" + "sti %1;\n\t" + : "=d"(val), "=d"(tmp): "a"(addr) + ); + + return (unsigned char) val; +} + +static inline unsigned short readw(void __iomem *addr) +{ + unsigned int val; + int tmp; + + __asm__ __volatile__ ("cli %1;\n\t" + "NOP; NOP; SSYNC;\n\t" + "%0 = w [%2] (z);\n\t" + "sti %1;\n\t" + : "=d"(val), "=d"(tmp): "a"(addr) + ); + + return (unsigned short) val; +} + +static inline unsigned int readl(void __iomem *addr) +{ + unsigned int val; + int tmp; + + __asm__ __volatile__ ("cli %1;\n\t" + "NOP; NOP; SSYNC;\n\t" + "%0 = [%2];\n\t" + "sti %1;\n\t" + : "=d"(val), "=d"(tmp): "a"(addr) + ); + return val; +} + +#endif /* __ASSEMBLY__ */ + +#define writeb(b,addr) (void)((*(volatile unsigned char *) (addr)) = (b)) +#define writew(b,addr) (void)((*(volatile unsigned short *) (addr)) = (b)) +#define writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b)) + +#define __raw_readb readb +#define __raw_readw readw +#define __raw_readl readl +#define __raw_writeb writeb +#define __raw_writew writew +#define __raw_writel writel +#define memset_io(a,b,c) memset((void *)(a),(b),(c)) +#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c)) +#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c)) + +#define inb(addr) readb(addr) +#define inw(addr) readw(addr) +#define inl(addr) readl(addr) +#define outb(x,addr) ((void) writeb(x,addr)) +#define outw(x,addr) ((void) writew(x,addr)) +#define outl(x,addr) ((void) writel(x,addr)) + +#define inb_p(addr) inb(addr) +#define inw_p(addr) inw(addr) +#define inl_p(addr) inl(addr) +#define outb_p(x,addr) outb(x,addr) +#define outw_p(x,addr) outw(x,addr) +#define outl_p(x,addr) outl(x,addr) + +#define ioread8_rep(a,d,c) insb(a,d,c) +#define ioread16_rep(a,d,c) insw(a,d,c) +#define ioread32_rep(a,d,c) insl(a,d,c) +#define iowrite8_rep(a,s,c) outsb(a,s,c) +#define iowrite16_rep(a,s,c) outsw(a,s,c) +#define iowrite32_rep(a,s,c) outsl(a,s,c) + +#define ioread8(X) readb(X) +#define ioread16(X) readw(X) +#define ioread32(X) readl(X) +#define iowrite8(val,X) writeb(val,X) +#define iowrite16(val,X) writew(val,X) +#define iowrite32(val,X) writel(val,X) + +#define IO_SPACE_LIMIT 0xffffffff + +/* Values for nocacheflag and cmode */ +#define IOMAP_NOCACHE_SER 1 + +#ifndef __ASSEMBLY__ + +extern void outsb(void __iomem *port, const void *addr, unsigned long count); +extern void outsw(void __iomem *port, const void *addr, unsigned long count); +extern void outsl(void __iomem *port, const void *addr, unsigned long count); + +extern void insb(const void __iomem *port, void *addr, unsigned long count); +extern void insw(const void __iomem *port, void *addr, unsigned long count); +extern void insl(const void __iomem *port, void *addr, unsigned long count); + +/* + * Map some physical address range into the kernel address space. + */ +static inline void __iomem *__ioremap(unsigned long physaddr, unsigned long size, + int cacheflag) +{ + return (void __iomem *)physaddr; +} + +/* + * Unmap a ioremap()ed region again + */ +static inline void iounmap(void *addr) +{ +} + +/* + * __iounmap unmaps nearly everything, so be careful + * it doesn't free currently pointer/page tables anymore but it + * wans't used anyway and might be added later. + */ +static inline void __iounmap(void *addr, unsigned long size) +{ +} + +/* + * Set new cache mode for some kernel address space. + * The caller must push data for that range itself, if such data may already + * be in the cache. + */ +static inline void kernel_set_cachemode(void *addr, unsigned long size, + int cmode) +{ +} + +static inline void __iomem *ioremap(unsigned long physaddr, unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); +} +static inline void __iomem *ioremap_nocache(unsigned long physaddr, + unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); +} + +extern void blkfin_inv_cache_all(void); + +#endif + +#define ioport_map(port, nr) ((void __iomem*)(port)) +#define ioport_unmap(addr) + +#define dma_cache_inv(_start,_size) do { blkfin_inv_cache_all();} while (0) +#define dma_cache_wback(_start,_size) do { } while (0) +#define dma_cache_wback_inv(_start,_size) do { blkfin_inv_cache_all();} while (0) + +/* Pages to physical address... */ +#define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT) +#define page_to_bus(page) ((page - mem_map) << PAGE_SHIFT) + +#define mm_ptov(vaddr) ((void *) (vaddr)) +#define mm_vtop(vaddr) ((unsigned long) (vaddr)) +#define phys_to_virt(vaddr) ((void *) (vaddr)) +#define virt_to_phys(vaddr) ((unsigned long) (vaddr)) + +#define virt_to_bus virt_to_phys +#define bus_to_virt phys_to_virt + +/* + * Convert a physical pointer to a virtual kernel pointer for /dev/mem + * access + */ +#define xlate_dev_mem_ptr(p) __va(p) + +/* + * Convert a virtual cached pointer to an uncached pointer + */ +#define xlate_dev_kmem_ptr(p) p + +#endif /* __KERNEL__ */ + +#endif /* _BFIN_IO_H */ -- cgit v1.2.3