From d3d2176a0bc696b5365ce0e8f82a29a521d85fd0 Mon Sep 17 00:00:00 2001 From: David Gibson Date: Thu, 10 Nov 2005 15:26:20 +1100 Subject: [PATCH] powerpc: Move more ppc64 files with no ppc32 equivalent to powerpc This patch moves a bunch more files from arch/ppc64 and include/asm-ppc64 which have no equivalents in ppc32 code into arch/powerpc and include/asm-powerpc. The file affected are: hvcall.h proc_ppc64.c sysfs.c lparcfg.c rtas_pci.c The only changes apart from the move and corresponding Makefile changes are: - #ifndef/#define in includes updated to _ASM_POWERPC_ form - trailing whitespace removed - comments giving full paths removed Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64), built for 32-bit powermac (ARCH=powerpc). Signed-off-by: David Gibson Signed-off-by: Paul Mackerras --- include/asm-powerpc/hvcall.h | 173 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 173 insertions(+) create mode 100644 include/asm-powerpc/hvcall.h (limited to 'include/asm-powerpc/hvcall.h') diff --git a/include/asm-powerpc/hvcall.h b/include/asm-powerpc/hvcall.h new file mode 100644 index 000000000000..d36da61dbc53 --- /dev/null +++ b/include/asm-powerpc/hvcall.h @@ -0,0 +1,173 @@ +#ifndef _ASM_POWERPC_HVCALL_H +#define _ASM_POWERPC_HVCALL_H + +#define HVSC .long 0x44000022 + +#define H_Success 0 +#define H_Busy 1 /* Hardware busy -- retry later */ +#define H_Constrained 4 /* Resource request constrained to max allowed */ +#define H_LongBusyStartRange 9900 /* Start of long busy range */ +#define H_LongBusyOrder1msec 9900 /* Long busy, hint that 1msec is a good time to retry */ +#define H_LongBusyOrder10msec 9901 /* Long busy, hint that 10msec is a good time to retry */ +#define H_LongBusyOrder100msec 9902 /* Long busy, hint that 100msec is a good time to retry */ +#define H_LongBusyOrder1sec 9903 /* Long busy, hint that 1sec is a good time to retry */ +#define H_LongBusyOrder10sec 9904 /* Long busy, hint that 10sec is a good time to retry */ +#define H_LongBusyOrder100sec 9905 /* Long busy, hint that 100sec is a good time to retry */ +#define H_LongBusyEndRange 9905 /* End of long busy range */ +#define H_Hardware -1 /* Hardware error */ +#define H_Function -2 /* Function not supported */ +#define H_Privilege -3 /* Caller not privileged */ +#define H_Parameter -4 /* Parameter invalid, out-of-range or conflicting */ +#define H_Bad_Mode -5 /* Illegal msr value */ +#define H_PTEG_Full -6 /* PTEG is full */ +#define H_Not_Found -7 /* PTE was not found" */ +#define H_Reserved_DABR -8 /* DABR address is reserved by the hypervisor on this processor" */ +#define H_NoMem -9 +#define H_Authority -10 +#define H_Permission -11 +#define H_Dropped -12 +#define H_SourceParm -13 +#define H_DestParm -14 +#define H_RemoteParm -15 +#define H_Resource -16 + +/* Long Busy is a condition that can be returned by the firmware + * when a call cannot be completed now, but the identical call + * should be retried later. This prevents calls blocking in the + * firmware for long periods of time. Annoyingly the firmware can return + * a range of return codes, hinting at how long we should wait before + * retrying. If you don't care for the hint, the macro below is a good + * way to check for the long_busy return codes + */ +#define H_isLongBusy(x) ((x >= H_LongBusyStartRange) && (x <= H_LongBusyEndRange)) + +/* Flags */ +#define H_LARGE_PAGE (1UL<<(63-16)) +#define H_EXACT (1UL<<(63-24)) /* Use exact PTE or return H_PTEG_FULL */ +#define H_R_XLATE (1UL<<(63-25)) /* include a valid logical page num in the pte if the valid bit is set */ +#define H_READ_4 (1UL<<(63-26)) /* Return 4 PTEs */ +#define H_AVPN (1UL<<(63-32)) /* An avpn is provided as a sanity test */ +#define H_ANDCOND (1UL<<(63-33)) +#define H_ICACHE_INVALIDATE (1UL<<(63-40)) /* icbi, etc. (ignored for IO pages) */ +#define H_ICACHE_SYNCHRONIZE (1UL<<(63-41)) /* dcbst, icbi, etc (ignored for IO pages */ +#define H_ZERO_PAGE (1UL<<(63-48)) /* zero the page before mapping (ignored for IO pages) */ +#define H_COPY_PAGE (1UL<<(63-49)) +#define H_N (1UL<<(63-61)) +#define H_PP1 (1UL<<(63-62)) +#define H_PP2 (1UL<<(63-63)) + +/* DABRX flags */ +#define H_DABRX_HYPERVISOR (1UL<<(63-61)) +#define H_DABRX_KERNEL (1UL<<(63-62)) +#define H_DABRX_USER (1UL<<(63-63)) + +/* pSeries hypervisor opcodes */ +#define H_REMOVE 0x04 +#define H_ENTER 0x08 +#define H_READ 0x0c +#define H_CLEAR_MOD 0x10 +#define H_CLEAR_REF 0x14 +#define H_PROTECT 0x18 +#define H_GET_TCE 0x1c +#define H_PUT_TCE 0x20 +#define H_SET_SPRG0 0x24 +#define H_SET_DABR 0x28 +#define H_PAGE_INIT 0x2c +#define H_SET_ASR 0x30 +#define H_ASR_ON 0x34 +#define H_ASR_OFF 0x38 +#define H_LOGICAL_CI_LOAD 0x3c +#define H_LOGICAL_CI_STORE 0x40 +#define H_LOGICAL_CACHE_LOAD 0x44 +#define H_LOGICAL_CACHE_STORE 0x48 +#define H_LOGICAL_ICBI 0x4c +#define H_LOGICAL_DCBF 0x50 +#define H_GET_TERM_CHAR 0x54 +#define H_PUT_TERM_CHAR 0x58 +#define H_REAL_TO_LOGICAL 0x5c +#define H_HYPERVISOR_DATA 0x60 +#define H_EOI 0x64 +#define H_CPPR 0x68 +#define H_IPI 0x6c +#define H_IPOLL 0x70 +#define H_XIRR 0x74 +#define H_PERFMON 0x7c +#define H_MIGRATE_DMA 0x78 +#define H_REGISTER_VPA 0xDC +#define H_CEDE 0xE0 +#define H_CONFER 0xE4 +#define H_PROD 0xE8 +#define H_GET_PPP 0xEC +#define H_SET_PPP 0xF0 +#define H_PURR 0xF4 +#define H_PIC 0xF8 +#define H_REG_CRQ 0xFC +#define H_FREE_CRQ 0x100 +#define H_VIO_SIGNAL 0x104 +#define H_SEND_CRQ 0x108 +#define H_COPY_RDMA 0x110 +#define H_SET_XDABR 0x134 +#define H_STUFF_TCE 0x138 +#define H_PUT_TCE_INDIRECT 0x13C +#define H_VTERM_PARTNER_INFO 0x150 +#define H_REGISTER_VTERM 0x154 +#define H_FREE_VTERM 0x158 +#define H_POLL_PENDING 0x1D8 + +#ifndef __ASSEMBLY__ + +/* plpar_hcall() -- Generic call interface using above opcodes + * + * The actual call interface is a hypervisor call instruction with + * the opcode in R3 and input args in R4-R7. + * Status is returned in R3 with variable output values in R4-R11. + * Only H_PTE_READ with H_READ_4 uses R6-R11 so we ignore it for now + * and return only two out args which MUST ALWAYS BE PROVIDED. + */ +long plpar_hcall(unsigned long opcode, + unsigned long arg1, + unsigned long arg2, + unsigned long arg3, + unsigned long arg4, + unsigned long *out1, + unsigned long *out2, + unsigned long *out3); + +/* Same as plpar_hcall but for those opcodes that return no values + * other than status. Slightly more efficient. + */ +long plpar_hcall_norets(unsigned long opcode, ...); + +/* + * Special hcall interface for ibmveth support. + * Takes 8 input parms. Returns a rc and stores the + * R4 return value in *out1. + */ +long plpar_hcall_8arg_2ret(unsigned long opcode, + unsigned long arg1, + unsigned long arg2, + unsigned long arg3, + unsigned long arg4, + unsigned long arg5, + unsigned long arg6, + unsigned long arg7, + unsigned long arg8, + unsigned long *out1); + +/* plpar_hcall_4out() + * + * same as plpar_hcall except with 4 output arguments. + * + */ +long plpar_hcall_4out(unsigned long opcode, + unsigned long arg1, + unsigned long arg2, + unsigned long arg3, + unsigned long arg4, + unsigned long *out1, + unsigned long *out2, + unsigned long *out3, + unsigned long *out4); + +#endif /* __ASSEMBLY__ */ +#endif /* _ASM_POWERPC_HVCALL_H */ -- cgit v1.2.3