From 4d1a3a0dc551cfa7304ca46e014231500f3b81a6 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Tue, 13 Dec 2011 16:57:07 +0100 Subject: ARM: 7218/1: mmc: mmci: Provide option to configure bus signal direction The ST Micro variant supports bus signal direction indication. A new member in the variant struct is added for this. Moreover the actual signal direction configuration is board specific, thus the amba mmci platform data is extended with a new member to be able provide mmci with these specific board configurations. This patch is based upon a patch from Sebastian Rasmussen. Tested-by: Linus Walleij Signed-off-by: Sebastian Rasmussen Signed-off-by: Ulf Hansson Signed-off-by: Russell King --- include/linux/amba/mmci.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'include/linux/amba') diff --git a/include/linux/amba/mmci.h b/include/linux/amba/mmci.h index 0101e9c17fa1..b51bf5fa85f8 100644 --- a/include/linux/amba/mmci.h +++ b/include/linux/amba/mmci.h @@ -6,6 +6,19 @@ #include + +/* + * These defines is places here due to access is needed from machine + * configuration files. The ST Micro version does not have ROD and + * reuse the voltage registers for direction settings. + */ +#define MCI_ST_DATA2DIREN (1 << 2) +#define MCI_ST_CMDDIREN (1 << 3) +#define MCI_ST_DATA0DIREN (1 << 4) +#define MCI_ST_DATA31DIREN (1 << 5) +#define MCI_ST_FBCLKEN (1 << 7) +#define MCI_ST_DATA74DIREN (1 << 8) + /* Just some dummy forwarding */ struct dma_chan; @@ -31,6 +44,8 @@ struct dma_chan; * @capabilities: the capabilities of the block as implemented in * this platform, signify anything MMC_CAP_* from mmc/host.h * @capabilities2: more capabilities, MMC_CAP2_* from mmc/host.h + * @sigdir: a bit field indicating for what bits in the MMC bus the host + * should enable signal direction indication. * @dma_filter: function used to select an appropriate RX and TX * DMA channel to be used for DMA, if and only if you're deploying the * generic DMA engine @@ -54,6 +69,7 @@ struct mmci_platform_data { bool cd_invert; unsigned long capabilities; unsigned long capabilities2; + u32 sigdir; bool (*dma_filter)(struct dma_chan *chan, void *filter_param); void *dma_rx_param; void *dma_tx_param; -- cgit v1.2.3 From bc521818e28042bb6018d91c353d24fb01ccb162 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Tue, 13 Dec 2011 16:57:55 +0100 Subject: ARM: 7219/1: mmc: mmci: Change vdd_handler to a generic ios_handler The purpose of the vdd_handler does not make sense. We remove it and use a generic approach instead. A new ios_handler is added, the purpose of which e.g. can be to control GPIO pins to a levelshifter. Previously the vdd_handler was also used for making additional changes to the power register bits. This option is superfluous and is therefore removed. Adaptaptions from the old vdd_handler to the new ios_handler is done for mach-ux500 board, which was the only one using the vdd_handler. This patch is based upon a patch from Sebastian Rasmussen. Tested-by: Linus Walleij Signed-off-by: Sebastian Rasmussen Signed-off-by: Ulf Hansson Signed-off-by: Russell King --- include/linux/amba/mmci.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux/amba') diff --git a/include/linux/amba/mmci.h b/include/linux/amba/mmci.h index b51bf5fa85f8..32a89cf5ec45 100644 --- a/include/linux/amba/mmci.h +++ b/include/linux/amba/mmci.h @@ -31,7 +31,8 @@ struct dma_chan; * @ocr_mask: available voltages on the 4 pins from the block, this * is ignored if a regulator is used, see the MMC_VDD_* masks in * mmc/host.h - * @vdd_handler: a callback function to translate a MMC_VDD_* + * @ios_handler: a callback function to act on specfic ios changes, + * used for example to control a levelshifter * mask into a value to be binary (or set some other custom bits * in MMCIPWR) or:ed and written into the MMCIPWR register of the * block. May also control external power based on the power_mode. @@ -61,8 +62,7 @@ struct dma_chan; struct mmci_platform_data { unsigned int f_max; unsigned int ocr_mask; - u32 (*vdd_handler)(struct device *, unsigned int vdd, - unsigned char power_mode); + int (*ios_handler)(struct device *, struct mmc_ios *); unsigned int (*status)(struct device *); int gpio_wp; int gpio_cd; -- cgit v1.2.3 From 9e5ed094c89e55fbf11d2e81d60be98eb12346c0 Mon Sep 17 00:00:00 2001 From: viresh kumar Date: Thu, 15 Mar 2012 10:40:38 +0100 Subject: ARM: 7362/1: AMBA: Add module_amba_driver() helper macro for amba_driver For simple modules that contain a single amba_driver without any additional setup code then ends up being a block of duplicated boilerplate. This patch adds a new macro, module_amba_driver(), which replaces the module_init()/module_exit() registrations with template functions. Signed-off-by: Viresh Kumar Signed-off-by: Russell King --- include/linux/amba/bus.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/linux/amba') diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h index a9fab831caf8..7847e197730a 100644 --- a/include/linux/amba/bus.h +++ b/include/linux/amba/bus.h @@ -125,4 +125,13 @@ struct amba_device name##_device = { \ .periphid = id, \ } +/* + * module_amba_driver() - Helper macro for drivers that don't do anything + * special in module init/exit. This eliminates a lot of boilerplate. Each + * module may only use this macro once, and calling it replaces module_init() + * and module_exit() + */ +#define module_amba_driver(__amba_drv) \ + module_driver(__amba_drv, amba_driver_register, amba_driver_unregister) + #endif -- cgit v1.2.3