From 2971944582ff43b7dedbb460777052243ac9915a Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Mon, 9 Aug 2010 12:54:43 +0100 Subject: ARM: 6307/1: mmci: allow the card detect GPIO value not to be inverted On some platforms, the GPIO value from the gpio_cd pin doesn't need to be inverted to get it active high. Add a cd_invert platform data parameter and change existing platforms using GPIO for CD (only Realview) to enable it. Acked-by: Linus Walleij Signed-off-by: Rabin Vincent Signed-off-by: Russell King --- include/linux/amba/mmci.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux/amba') diff --git a/include/linux/amba/mmci.h b/include/linux/amba/mmci.h index ca84ce70d5d5..f4ee9acc9721 100644 --- a/include/linux/amba/mmci.h +++ b/include/linux/amba/mmci.h @@ -24,6 +24,7 @@ * whether a card is present in the MMC slot or not * @gpio_wp: read this GPIO pin to see if the card is write protected * @gpio_cd: read this GPIO pin to detect card insertion + * @cd_invert: true if the gpio_cd pin value is active low * @capabilities: the capabilities of the block as implemented in * this platform, signify anything MMC_CAP_* from mmc/host.h */ @@ -35,6 +36,7 @@ struct mmci_platform_data { unsigned int (*status)(struct device *); int gpio_wp; int gpio_cd; + bool cd_invert; unsigned long capabilities; }; -- cgit v1.2.3 From e8689e63d4d2046079f2db9d494ac05c6885ac0c Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 28 Sep 2010 15:57:37 +0200 Subject: dmaengine: driver for the ARM PL080/PL081 PrimeCells v5 This creates a DMAengine driver for the ARM PL080/PL081 PrimeCells based on the implementation earlier submitted by Peter Pearse. This is working like a charm for memcpy and slave DMA to the PL011 PrimeCell on the PB11MPCore. This DMA controller is used in mostly unmodified form in the ARM RealView and Versatile platforms, in the ST-Ericsson Nomadik, and in the ST SPEAr platform. It has been converted to use the header from the Samsung PL080 derivate instead of its own defintions. The Samsungs have a custom driver in their mach-* folders though, atleast we can share the register definitions. Cc: Peter Pearse Cc: Ben Dooks Cc: Kukjin Kim Cc: Alessandro Rubini Acked-by: Viresh Kumar Signed-off-by: Linus Walleij [GFP_KERNEL to GFP_NOWAIT in pl08x_prep_dma_memcpy] Signed-off-by: Dan Williams --- include/linux/amba/pl08x.h | 222 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 222 insertions(+) create mode 100644 include/linux/amba/pl08x.h (limited to 'include/linux/amba') diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h new file mode 100644 index 000000000000..521a0f8974ac --- /dev/null +++ b/include/linux/amba/pl08x.h @@ -0,0 +1,222 @@ +/* + * linux/amba/pl08x.h - ARM PrimeCell DMA Controller driver + * + * Copyright (C) 2005 ARM Ltd + * Copyright (C) 2010 ST-Ericsson SA + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * pl08x information required by platform code + * + * Please credit ARM.com + * Documentation: ARM DDI 0196D + * + */ + +#ifndef AMBA_PL08X_H +#define AMBA_PL08X_H + +/* We need sizes of structs from this header */ +#include +#include + +/** + * struct pl08x_channel_data - data structure to pass info between + * platform and PL08x driver regarding channel configuration + * @bus_id: name of this device channel, not just a device name since + * devices may have more than one channel e.g. "foo_tx" + * @min_signal: the minimum DMA signal number to be muxed in for this + * channel (for platforms supporting muxed signals). If you have + * static assignments, make sure this is set to the assigned signal + * number, PL08x have 16 possible signals in number 0 thru 15 so + * when these are not enough they often get muxed (in hardware) + * disabling simultaneous use of the same channel for two devices. + * @max_signal: the maximum DMA signal number to be muxed in for + * the channel. Set to the same as min_signal for + * devices with static assignments + * @muxval: a number usually used to poke into some mux regiser to + * mux in the signal to this channel + * @cctl_opt: default options for the channel control register + * @addr: source/target address in physical memory for this DMA channel, + * can be the address of a FIFO register for burst requests for example. + * This can be left undefined if the PrimeCell API is used for configuring + * this. + * @circular_buffer: whether the buffer passed in is circular and + * shall simply be looped round round (like a record baby round + * round round round) + * @single: the device connected to this channel will request single + * DMA transfers, not bursts. (Bursts are default.) + */ +struct pl08x_channel_data { + char *bus_id; + int min_signal; + int max_signal; + u32 muxval; + u32 cctl; + u32 ccfg; + dma_addr_t addr; + bool circular_buffer; + bool single; +}; + +/** + * Struct pl08x_bus_data - information of source or destination + * busses for a transfer + * @addr: current address + * @maxwidth: the maximum width of a transfer on this bus + * @buswidth: the width of this bus in bytes: 1, 2 or 4 + * @fill_bytes: bytes required to fill to the next bus memory + * boundary + */ +struct pl08x_bus_data { + dma_addr_t addr; + u8 maxwidth; + u8 buswidth; + u32 fill_bytes; +}; + +/** + * struct pl08x_phy_chan - holder for the physical channels + * @id: physical index to this channel + * @lock: a lock to use when altering an instance of this struct + * @signal: the physical signal (aka channel) serving this + * physical channel right now + * @serving: the virtual channel currently being served by this + * physical channel + */ +struct pl08x_phy_chan { + unsigned int id; + void __iomem *base; + spinlock_t lock; + int signal; + struct pl08x_dma_chan *serving; + u32 csrc; + u32 cdst; + u32 clli; + u32 cctl; + u32 ccfg; +}; + +/** + * struct pl08x_txd - wrapper for struct dma_async_tx_descriptor + * @llis_bus: DMA memory address (physical) start for the LLIs + * @llis_va: virtual memory address start for the LLIs + */ +struct pl08x_txd { + struct dma_async_tx_descriptor tx; + struct list_head node; + enum dma_data_direction direction; + struct pl08x_bus_data srcbus; + struct pl08x_bus_data dstbus; + int len; + dma_addr_t llis_bus; + void *llis_va; + struct pl08x_channel_data *cd; + bool active; + /* + * Settings to be put into the physical channel when we + * trigger this txd + */ + u32 csrc; + u32 cdst; + u32 clli; + u32 cctl; +}; + +/** + * struct pl08x_dma_chan_state - holds the PL08x specific virtual + * channel states + * @PL08X_CHAN_IDLE: the channel is idle + * @PL08X_CHAN_RUNNING: the channel has allocated a physical transport + * channel and is running a transfer on it + * @PL08X_CHAN_PAUSED: the channel has allocated a physical transport + * channel, but the transfer is currently paused + * @PL08X_CHAN_WAITING: the channel is waiting for a physical transport + * channel to become available (only pertains to memcpy channels) + */ +enum pl08x_dma_chan_state { + PL08X_CHAN_IDLE, + PL08X_CHAN_RUNNING, + PL08X_CHAN_PAUSED, + PL08X_CHAN_WAITING, +}; + +/** + * struct pl08x_dma_chan - this structure wraps a DMA ENGINE channel + * @chan: wrappped abstract channel + * @phychan: the physical channel utilized by this channel, if there is one + * @tasklet: tasklet scheduled by the IRQ to handle actual work etc + * @name: name of channel + * @cd: channel platform data + * @runtime_addr: address for RX/TX according to the runtime config + * @runtime_direction: current direction of this channel according to + * runtime config + * @lc: last completed transaction on this channel + * @desc_list: queued transactions pending on this channel + * @at: active transaction on this channel + * @lockflags: sometimes we let a lock last between two function calls, + * especially prep/submit, and then we need to store the IRQ flags + * in the channel state, here + * @lock: a lock for this channel data + * @host: a pointer to the host (internal use) + * @state: whether the channel is idle, paused, running etc + * @slave: whether this channel is a device (slave) or for memcpy + * @waiting: a TX descriptor on this channel which is waiting for + * a physical channel to become available + */ +struct pl08x_dma_chan { + struct dma_chan chan; + struct pl08x_phy_chan *phychan; + struct tasklet_struct tasklet; + char *name; + struct pl08x_channel_data *cd; + dma_addr_t runtime_addr; + enum dma_data_direction runtime_direction; + atomic_t last_issued; + dma_cookie_t lc; + struct list_head desc_list; + struct pl08x_txd *at; + unsigned long lockflags; + spinlock_t lock; + void *host; + enum pl08x_dma_chan_state state; + bool slave; + struct pl08x_txd *waiting; +}; + +/** + * struct pl08x_platform_data - the platform configuration for the + * PL08x PrimeCells. + * @slave_channels: the channels defined for the different devices on the + * platform, all inclusive, including multiplexed channels. The available + * physical channels will be multiplexed around these signals as they + * are requested, just enumerate all possible channels. + * @get_signal: request a physical signal to be used for a DMA + * transfer immediately: if there is some multiplexing or similar blocking + * the use of the channel the transfer can be denied by returning + * less than zero, else it returns the allocated signal number + * @put_signal: indicate to the platform that this physical signal is not + * running any DMA transfer and multiplexing can be recycled + * @bus_bit_lli: Bit[0] of the address indicated which AHB bus master the + * LLI addresses are on 0/1 Master 1/2. + */ +struct pl08x_platform_data { + struct pl08x_channel_data *slave_channels; + unsigned int num_slave_channels; + struct pl08x_channel_data memcpy_channel; + int (*get_signal)(struct pl08x_dma_chan *); + void (*put_signal)(struct pl08x_dma_chan *); +}; + +#ifdef CONFIG_AMBA_PL08X +bool pl08x_filter_id(struct dma_chan *chan, void *chan_id); +#else +static inline bool pl08x_filter_id(struct dma_chan *chan, void *chan_id) +{ + return false; +} +#endif + +#endif /* AMBA_PL08X_H */ -- cgit v1.2.3 From 01723a9566f9e9ce4c75e5c4c9f6dc20600871a7 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 7 Sep 2010 22:43:19 +0100 Subject: ARM: 6368/1: move the PrimeCell IDs to use macros This make four macros for the PrimeCell ID register available to drivers that use them witout using the PrimeCell/AMBA bus abstraction and struct amba_device. It also moves the magic PrimeCell CID "B105F00D" to the bus.h header file. Signed-off-by: Linus Walleij Signed-off-by: Russell King --- include/linux/amba/bus.h | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) (limited to 'include/linux/amba') diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h index b0c174012436..c6454cca0447 100644 --- a/include/linux/amba/bus.h +++ b/include/linux/amba/bus.h @@ -20,6 +20,7 @@ #include #define AMBA_NR_IRQS 2 +#define AMBA_CID 0xb105f00d struct clk; @@ -70,9 +71,15 @@ void amba_release_regions(struct amba_device *); #define amba_pclk_disable(d) \ do { if (!IS_ERR((d)->pclk)) clk_disable((d)->pclk); } while (0) -#define amba_config(d) (((d)->periphid >> 24) & 0xff) -#define amba_rev(d) (((d)->periphid >> 20) & 0x0f) -#define amba_manf(d) (((d)->periphid >> 12) & 0xff) -#define amba_part(d) ((d)->periphid & 0xfff) +/* Some drivers don't use the struct amba_device */ +#define AMBA_CONFIG_BITS(a) (((a) >> 24) & 0xff) +#define AMBA_REV_BITS(a) (((a) >> 20) & 0x0f) +#define AMBA_MANF_BITS(a) (((a) >> 12) & 0xff) +#define AMBA_PART_BITS(a) ((a) & 0xfff) + +#define amba_config(d) AMBA_CONFIG_BITS((d)->periphid) +#define amba_rev(d) AMBA_REV_BITS((d)->periphid) +#define amba_manf(d) AMBA_MANF_BITS((d)->periphid) +#define amba_part(d) AMBA_PART_BITS((d)->periphid) #endif -- cgit v1.2.3 From 29e29f27486ed7074df259b3eda8656bb014e9b5 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 1 Oct 2010 09:15:41 +0100 Subject: ARM: 6421/1: amba-pl011: add missing ST specific registers The ST Micro derivates have several extra interesting registers that we may soon use for something interesting so may just as well define them in the header. Signed-off-by: Jonas Aaberg Signed-off-by: Linus Walleij Signed-off-by: Russell King --- include/linux/amba/serial.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include/linux/amba') diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h index e1b634b635f2..6021588ba0a8 100644 --- a/include/linux/amba/serial.h +++ b/include/linux/amba/serial.h @@ -32,7 +32,9 @@ #define UART01x_RSR 0x04 /* Receive status register (Read). */ #define UART01x_ECR 0x04 /* Error clear register (Write). */ #define UART010_LCRH 0x08 /* Line control register, high byte. */ +#define ST_UART011_DMAWM 0x08 /* DMA watermark configure register. */ #define UART010_LCRM 0x0C /* Line control register, middle byte. */ +#define ST_UART011_TIMEOUT 0x0C /* Timeout period register. */ #define UART010_LCRL 0x10 /* Line control register, low byte. */ #define UART010_CR 0x14 /* Control register. */ #define UART01x_FR 0x18 /* Flag register (Read only). */ @@ -51,6 +53,15 @@ #define UART011_MIS 0x40 /* Masked interrupt status. */ #define UART011_ICR 0x44 /* Interrupt clear register. */ #define UART011_DMACR 0x48 /* DMA control register. */ +#define ST_UART011_XFCR 0x50 /* XON/XOFF control register. */ +#define ST_UART011_XON1 0x54 /* XON1 register. */ +#define ST_UART011_XON2 0x58 /* XON2 register. */ +#define ST_UART011_XOFF1 0x5C /* XON1 register. */ +#define ST_UART011_XOFF2 0x60 /* XON2 register. */ +#define ST_UART011_ITCR 0x80 /* Integration test control register. */ +#define ST_UART011_ITIP 0x84 /* Integration test input register. */ +#define ST_UART011_ABCR 0x100 /* Autobaud control register. */ +#define ST_UART011_ABIMSC 0x15C /* Autobaud interrupt mask/clear register. */ #define UART011_DR_OE (1 << 11) #define UART011_DR_BE (1 << 10) -- cgit v1.2.3 From b1b6b9aa6fd32db97469e65d301ebc32dcd67992 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 29 Sep 2010 17:31:35 +0900 Subject: spi/pl022: add PrimeCell generic DMA support This extends the PL022 SSP/SPI driver with generic DMA engine support using the PrimeCell DMA engine interface. Also fix up the test code for the U300 platform. Signed-off-by: Linus Walleij Signed-off-by: Grant Likely --- include/linux/amba/pl022.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux/amba') diff --git a/include/linux/amba/pl022.h b/include/linux/amba/pl022.h index abf26cc47a2b..db6a191ddcf7 100644 --- a/include/linux/amba/pl022.h +++ b/include/linux/amba/pl022.h @@ -228,6 +228,7 @@ enum ssp_chip_select { }; +struct dma_chan; /** * struct pl022_ssp_master - device.platform_data for SPI controller devices. * @num_chipselect: chipselects are used to distinguish individual @@ -235,11 +236,16 @@ enum ssp_chip_select { * each slave has a chipselect signal, but it's common that not * every chipselect is connected to a slave. * @enable_dma: if true enables DMA driven transfers. + * @dma_rx_param: parameter to locate an RX DMA channel. + * @dma_tx_param: parameter to locate a TX DMA channel. */ struct pl022_ssp_controller { u16 bus_id; u8 num_chipselect; u8 enable_dma:1; + bool (*dma_filter)(struct dma_chan *chan, void *filter_param); + void *dma_rx_param; + void *dma_tx_param; }; /** -- cgit v1.2.3 From bde435a9ca376d0b7809768ca803dbf14416b9c1 Mon Sep 17 00:00:00 2001 From: Kevin Wells Date: Thu, 16 Sep 2010 06:18:50 -0700 Subject: spi/pl022: Add spi->mode support to AMBA SPI driver This patch adds spi->mode support for the AMBA pl022 driver and allows spidev to correctly alter SPI modes. Unused fields used in the pl022 header file for the pl022_config_chip have been removed. The ab8500 client driver selects the data transfer size instead of the platform data. For platforms that use the amba pl022 driver, the unused fields in the controller data structure have been removed and the .mode field in the SPI board info structure is used instead. Signed-off-by: Kevin Wells Tested-by: Linus Walleij Acked-by: Linus Walleij Signed-off-by: Grant Likely --- include/linux/amba/pl022.h | 6 ------ 1 file changed, 6 deletions(-) (limited to 'include/linux/amba') diff --git a/include/linux/amba/pl022.h b/include/linux/amba/pl022.h index db6a191ddcf7..bf143663df81 100644 --- a/include/linux/amba/pl022.h +++ b/include/linux/amba/pl022.h @@ -277,19 +277,13 @@ struct pl022_ssp_controller { */ struct pl022_config_chip { struct device *dev; - enum ssp_loopback lbm; enum ssp_interface iface; enum ssp_hierarchy hierarchy; bool slave_tx_disable; struct ssp_clock_params clk_freq; - enum ssp_rx_endian endian_rx; - enum ssp_tx_endian endian_tx; - enum ssp_data_size data_size; enum ssp_mode com_mode; enum ssp_rx_level_trig rx_lev_trig; enum ssp_tx_level_trig tx_lev_trig; - enum ssp_spi_clk_phase clk_phase; - enum ssp_spi_clk_pol clk_pol; enum ssp_microwire_ctrl_len ctrl_len; enum ssp_microwire_wait_state wait_state; enum ssp_duplex duplex; -- cgit v1.2.3 From 5a1c98be1de165c8ad1bd5343a5d779230669489 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 1 Oct 2010 11:47:32 +0200 Subject: spi/pl022: get rid of chipinfo dev pointer What is the dev pointer doing inside the platform data anyway. We have another pointer to the actual device at hand, use that. Signed-off-by: Linus Walleij Signed-off-by: Grant Likely --- include/linux/amba/pl022.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux/amba') diff --git a/include/linux/amba/pl022.h b/include/linux/amba/pl022.h index bf143663df81..4ce98f54186b 100644 --- a/include/linux/amba/pl022.h +++ b/include/linux/amba/pl022.h @@ -276,7 +276,6 @@ struct pl022_ssp_controller { * @dma_config: DMA configuration for SSP controller and peripheral */ struct pl022_config_chip { - struct device *dev; enum ssp_interface iface; enum ssp_hierarchy hierarchy; bool slave_tx_disable; -- cgit v1.2.3