From 0a848d638a25b4f2767b260ed83c271854e93cce Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 21 May 2017 23:57:25 +0200 Subject: gpio: max732x: move header file out of I2C realm include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang Signed-off-by: Linus Walleij --- include/linux/i2c/max732x.h | 22 ---------------------- 1 file changed, 22 deletions(-) delete mode 100644 include/linux/i2c/max732x.h (limited to 'include/linux/i2c') diff --git a/include/linux/i2c/max732x.h b/include/linux/i2c/max732x.h deleted file mode 100644 index c04bac8bf2fe..000000000000 --- a/include/linux/i2c/max732x.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef __LINUX_I2C_MAX732X_H -#define __LINUX_I2C_MAX732X_H - -/* platform data for the MAX732x 8/16-bit I/O expander driver */ - -struct max732x_platform_data { - /* number of the first GPIO */ - unsigned gpio_base; - - /* interrupt base */ - int irq_base; - - void *context; /* param to setup/teardown */ - - int (*setup)(struct i2c_client *client, - unsigned gpio, unsigned ngpio, - void *context); - int (*teardown)(struct i2c_client *client, - unsigned gpio, unsigned ngpio, - void *context); -}; -#endif /* __LINUX_I2C_MAX732X_H */ -- cgit v1.2.3 From b6480faeee234829b315168aebcb281ecf95f178 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 21 May 2017 23:57:26 +0200 Subject: gpio: pcf857x: move header file out of I2C realm include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang Signed-off-by: Linus Walleij --- include/linux/i2c/pcf857x.h | 44 -------------------------------------------- 1 file changed, 44 deletions(-) delete mode 100644 include/linux/i2c/pcf857x.h (limited to 'include/linux/i2c') diff --git a/include/linux/i2c/pcf857x.h b/include/linux/i2c/pcf857x.h deleted file mode 100644 index 0767a2a6b2f1..000000000000 --- a/include/linux/i2c/pcf857x.h +++ /dev/null @@ -1,44 +0,0 @@ -#ifndef __LINUX_PCF857X_H -#define __LINUX_PCF857X_H - -/** - * struct pcf857x_platform_data - data to set up pcf857x driver - * @gpio_base: number of the chip's first GPIO - * @n_latch: optional bit-inverse of initial register value; if - * you leave this initialized to zero the driver will act - * like the chip was just reset - * @setup: optional callback issued once the GPIOs are valid - * @teardown: optional callback issued before the GPIOs are invalidated - * @context: optional parameter passed to setup() and teardown() - * - * In addition to the I2C_BOARD_INFO() state appropriate to each chip, - * the i2c_board_info used with the pcf875x driver must provide its - * platform_data (pointer to one of these structures) with at least - * the gpio_base value initialized. - * - * The @setup callback may be used with the kind of board-specific glue - * which hands the (now-valid) GPIOs to other drivers, or which puts - * devices in their initial states using these GPIOs. - * - * These GPIO chips are only "quasi-bidirectional"; read the chip specs - * to understand the behavior. They don't have separate registers to - * record which pins are used for input or output, record which output - * values are driven, or provide access to input values. That must be - * inferred by reading the chip's value and knowing the last value written - * to it. If you leave n_latch initialized to zero, that last written - * value is presumed to be all ones (as if the chip were just reset). - */ -struct pcf857x_platform_data { - unsigned gpio_base; - unsigned n_latch; - - int (*setup)(struct i2c_client *client, - int gpio, unsigned ngpio, - void *context); - int (*teardown)(struct i2c_client *client, - int gpio, unsigned ngpio, - void *context); - void *context; -}; - -#endif /* __LINUX_PCF857X_H */ -- cgit v1.2.3 From c1a4634013141b96324c647b45356e16f1fff781 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 21 May 2017 23:57:27 +0200 Subject: gpio: adp5588: move header file out of I2C realm include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang Acked-by: Dmitry Torokhov Signed-off-by: Linus Walleij --- include/linux/i2c/adp5588.h | 172 -------------------------------------------- 1 file changed, 172 deletions(-) delete mode 100644 include/linux/i2c/adp5588.h (limited to 'include/linux/i2c') diff --git a/include/linux/i2c/adp5588.h b/include/linux/i2c/adp5588.h deleted file mode 100644 index c2153049cfbd..000000000000 --- a/include/linux/i2c/adp5588.h +++ /dev/null @@ -1,172 +0,0 @@ -/* - * Analog Devices ADP5588 I/O Expander and QWERTY Keypad Controller - * - * Copyright 2009-2010 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#ifndef _ADP5588_H -#define _ADP5588_H - -#define DEV_ID 0x00 /* Device ID */ -#define CFG 0x01 /* Configuration Register1 */ -#define INT_STAT 0x02 /* Interrupt Status Register */ -#define KEY_LCK_EC_STAT 0x03 /* Key Lock and Event Counter Register */ -#define Key_EVENTA 0x04 /* Key Event Register A */ -#define Key_EVENTB 0x05 /* Key Event Register B */ -#define Key_EVENTC 0x06 /* Key Event Register C */ -#define Key_EVENTD 0x07 /* Key Event Register D */ -#define Key_EVENTE 0x08 /* Key Event Register E */ -#define Key_EVENTF 0x09 /* Key Event Register F */ -#define Key_EVENTG 0x0A /* Key Event Register G */ -#define Key_EVENTH 0x0B /* Key Event Register H */ -#define Key_EVENTI 0x0C /* Key Event Register I */ -#define Key_EVENTJ 0x0D /* Key Event Register J */ -#define KP_LCK_TMR 0x0E /* Keypad Lock1 to Lock2 Timer */ -#define UNLOCK1 0x0F /* Unlock Key1 */ -#define UNLOCK2 0x10 /* Unlock Key2 */ -#define GPIO_INT_STAT1 0x11 /* GPIO Interrupt Status */ -#define GPIO_INT_STAT2 0x12 /* GPIO Interrupt Status */ -#define GPIO_INT_STAT3 0x13 /* GPIO Interrupt Status */ -#define GPIO_DAT_STAT1 0x14 /* GPIO Data Status, Read twice to clear */ -#define GPIO_DAT_STAT2 0x15 /* GPIO Data Status, Read twice to clear */ -#define GPIO_DAT_STAT3 0x16 /* GPIO Data Status, Read twice to clear */ -#define GPIO_DAT_OUT1 0x17 /* GPIO DATA OUT */ -#define GPIO_DAT_OUT2 0x18 /* GPIO DATA OUT */ -#define GPIO_DAT_OUT3 0x19 /* GPIO DATA OUT */ -#define GPIO_INT_EN1 0x1A /* GPIO Interrupt Enable */ -#define GPIO_INT_EN2 0x1B /* GPIO Interrupt Enable */ -#define GPIO_INT_EN3 0x1C /* GPIO Interrupt Enable */ -#define KP_GPIO1 0x1D /* Keypad or GPIO Selection */ -#define KP_GPIO2 0x1E /* Keypad or GPIO Selection */ -#define KP_GPIO3 0x1F /* Keypad or GPIO Selection */ -#define GPI_EM1 0x20 /* GPI Event Mode 1 */ -#define GPI_EM2 0x21 /* GPI Event Mode 2 */ -#define GPI_EM3 0x22 /* GPI Event Mode 3 */ -#define GPIO_DIR1 0x23 /* GPIO Data Direction */ -#define GPIO_DIR2 0x24 /* GPIO Data Direction */ -#define GPIO_DIR3 0x25 /* GPIO Data Direction */ -#define GPIO_INT_LVL1 0x26 /* GPIO Edge/Level Detect */ -#define GPIO_INT_LVL2 0x27 /* GPIO Edge/Level Detect */ -#define GPIO_INT_LVL3 0x28 /* GPIO Edge/Level Detect */ -#define Debounce_DIS1 0x29 /* Debounce Disable */ -#define Debounce_DIS2 0x2A /* Debounce Disable */ -#define Debounce_DIS3 0x2B /* Debounce Disable */ -#define GPIO_PULL1 0x2C /* GPIO Pull Disable */ -#define GPIO_PULL2 0x2D /* GPIO Pull Disable */ -#define GPIO_PULL3 0x2E /* GPIO Pull Disable */ -#define CMP_CFG_STAT 0x30 /* Comparator Configuration and Status Register */ -#define CMP_CONFG_SENS1 0x31 /* Sensor1 Comparator Configuration Register */ -#define CMP_CONFG_SENS2 0x32 /* L2 Light Sensor Reference Level, Output Falling for Sensor 1 */ -#define CMP1_LVL2_TRIP 0x33 /* L2 Light Sensor Hysteresis (Active when Output Rising) for Sensor 1 */ -#define CMP1_LVL2_HYS 0x34 /* L3 Light Sensor Reference Level, Output Falling For Sensor 1 */ -#define CMP1_LVL3_TRIP 0x35 /* L3 Light Sensor Hysteresis (Active when Output Rising) For Sensor 1 */ -#define CMP1_LVL3_HYS 0x36 /* Sensor 2 Comparator Configuration Register */ -#define CMP2_LVL2_TRIP 0x37 /* L2 Light Sensor Reference Level, Output Falling for Sensor 2 */ -#define CMP2_LVL2_HYS 0x38 /* L2 Light Sensor Hysteresis (Active when Output Rising) for Sensor 2 */ -#define CMP2_LVL3_TRIP 0x39 /* L3 Light Sensor Reference Level, Output Falling For Sensor 2 */ -#define CMP2_LVL3_HYS 0x3A /* L3 Light Sensor Hysteresis (Active when Output Rising) For Sensor 2 */ -#define CMP1_ADC_DAT_R1 0x3B /* Comparator 1 ADC data Register1 */ -#define CMP1_ADC_DAT_R2 0x3C /* Comparator 1 ADC data Register2 */ -#define CMP2_ADC_DAT_R1 0x3D /* Comparator 2 ADC data Register1 */ -#define CMP2_ADC_DAT_R2 0x3E /* Comparator 2 ADC data Register2 */ - -#define ADP5588_DEVICE_ID_MASK 0xF - - /* Configuration Register1 */ -#define ADP5588_AUTO_INC (1 << 7) -#define ADP5588_GPIEM_CFG (1 << 6) -#define ADP5588_OVR_FLOW_M (1 << 5) -#define ADP5588_INT_CFG (1 << 4) -#define ADP5588_OVR_FLOW_IEN (1 << 3) -#define ADP5588_K_LCK_IM (1 << 2) -#define ADP5588_GPI_IEN (1 << 1) -#define ADP5588_KE_IEN (1 << 0) - -/* Interrupt Status Register */ -#define ADP5588_CMP2_INT (1 << 5) -#define ADP5588_CMP1_INT (1 << 4) -#define ADP5588_OVR_FLOW_INT (1 << 3) -#define ADP5588_K_LCK_INT (1 << 2) -#define ADP5588_GPI_INT (1 << 1) -#define ADP5588_KE_INT (1 << 0) - -/* Key Lock and Event Counter Register */ -#define ADP5588_K_LCK_EN (1 << 6) -#define ADP5588_LCK21 0x30 -#define ADP5588_KEC 0xF - -#define ADP5588_MAXGPIO 18 -#define ADP5588_BANK(offs) ((offs) >> 3) -#define ADP5588_BIT(offs) (1u << ((offs) & 0x7)) - -/* Put one of these structures in i2c_board_info platform_data */ - -#define ADP5588_KEYMAPSIZE 80 - -#define GPI_PIN_ROW0 97 -#define GPI_PIN_ROW1 98 -#define GPI_PIN_ROW2 99 -#define GPI_PIN_ROW3 100 -#define GPI_PIN_ROW4 101 -#define GPI_PIN_ROW5 102 -#define GPI_PIN_ROW6 103 -#define GPI_PIN_ROW7 104 -#define GPI_PIN_COL0 105 -#define GPI_PIN_COL1 106 -#define GPI_PIN_COL2 107 -#define GPI_PIN_COL3 108 -#define GPI_PIN_COL4 109 -#define GPI_PIN_COL5 110 -#define GPI_PIN_COL6 111 -#define GPI_PIN_COL7 112 -#define GPI_PIN_COL8 113 -#define GPI_PIN_COL9 114 - -#define GPI_PIN_ROW_BASE GPI_PIN_ROW0 -#define GPI_PIN_ROW_END GPI_PIN_ROW7 -#define GPI_PIN_COL_BASE GPI_PIN_COL0 -#define GPI_PIN_COL_END GPI_PIN_COL9 - -#define GPI_PIN_BASE GPI_PIN_ROW_BASE -#define GPI_PIN_END GPI_PIN_COL_END - -#define ADP5588_GPIMAPSIZE_MAX (GPI_PIN_END - GPI_PIN_BASE + 1) - -struct adp5588_gpi_map { - unsigned short pin; - unsigned short sw_evt; -}; - -struct adp5588_kpad_platform_data { - int rows; /* Number of rows */ - int cols; /* Number of columns */ - const unsigned short *keymap; /* Pointer to keymap */ - unsigned short keymapsize; /* Keymap size */ - unsigned repeat:1; /* Enable key repeat */ - unsigned en_keylock:1; /* Enable Key Lock feature */ - unsigned short unlock_key1; /* Unlock Key 1 */ - unsigned short unlock_key2; /* Unlock Key 2 */ - const struct adp5588_gpi_map *gpimap; - unsigned short gpimapsize; - const struct adp5588_gpio_platform_data *gpio_data; -}; - -struct i2c_client; /* forward declaration */ - -struct adp5588_gpio_platform_data { - int gpio_start; /* GPIO Chip base # */ - const char *const *names; - unsigned irq_base; /* interrupt base # */ - unsigned pullup_dis_mask; /* Pull-Up Disable Mask */ - int (*setup)(struct i2c_client *client, - unsigned gpio, unsigned ngpio, - void *context); - int (*teardown)(struct i2c_client *client, - unsigned gpio, unsigned ngpio, - void *context); - void *context; -}; - -#endif -- cgit v1.2.3