From 607ca46e97a1b6594b29647d98a32d545c24bdff Mon Sep 17 00:00:00 2001 From: David Howells Date: Sat, 13 Oct 2012 10:46:48 +0100 Subject: UAPI: (Scripted) Disintegrate include/linux Signed-off-by: David Howells Acked-by: Arnd Bergmann Acked-by: Thomas Gleixner Acked-by: Michael Kerrisk Acked-by: Paul E. McKenney Acked-by: Dave Jones --- include/linux/if.h | 235 ----------------------------------------------------- 1 file changed, 235 deletions(-) delete mode 100644 include/linux/if.h (limited to 'include/linux/if.h') diff --git a/include/linux/if.h b/include/linux/if.h deleted file mode 100644 index 1ec407b01e46..000000000000 --- a/include/linux/if.h +++ /dev/null @@ -1,235 +0,0 @@ -/* - * INET An implementation of the TCP/IP protocol suite for the LINUX - * operating system. INET is implemented using the BSD Socket - * interface as the means of communication with the user level. - * - * Global definitions for the INET interface module. - * - * Version: @(#)if.h 1.0.2 04/18/93 - * - * Authors: Original taken from Berkeley UNIX 4.3, (c) UCB 1982-1988 - * Ross Biro - * Fred N. van Kempen, - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _LINUX_IF_H -#define _LINUX_IF_H - -#include /* for "__kernel_caddr_t" et al */ -#include /* for "struct sockaddr" et al */ -#include /* for "__user" et al */ - -#define IFNAMSIZ 16 -#define IFALIASZ 256 -#include - -/* Standard interface flags (netdevice->flags). */ -#define IFF_UP 0x1 /* interface is up */ -#define IFF_BROADCAST 0x2 /* broadcast address valid */ -#define IFF_DEBUG 0x4 /* turn on debugging */ -#define IFF_LOOPBACK 0x8 /* is a loopback net */ -#define IFF_POINTOPOINT 0x10 /* interface is has p-p link */ -#define IFF_NOTRAILERS 0x20 /* avoid use of trailers */ -#define IFF_RUNNING 0x40 /* interface RFC2863 OPER_UP */ -#define IFF_NOARP 0x80 /* no ARP protocol */ -#define IFF_PROMISC 0x100 /* receive all packets */ -#define IFF_ALLMULTI 0x200 /* receive all multicast packets*/ - -#define IFF_MASTER 0x400 /* master of a load balancer */ -#define IFF_SLAVE 0x800 /* slave of a load balancer */ - -#define IFF_MULTICAST 0x1000 /* Supports multicast */ - -#define IFF_PORTSEL 0x2000 /* can set media type */ -#define IFF_AUTOMEDIA 0x4000 /* auto media select active */ -#define IFF_DYNAMIC 0x8000 /* dialup device with changing addresses*/ - -#define IFF_LOWER_UP 0x10000 /* driver signals L1 up */ -#define IFF_DORMANT 0x20000 /* driver signals dormant */ - -#define IFF_ECHO 0x40000 /* echo sent packets */ - -#define IFF_VOLATILE (IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|IFF_ECHO|\ - IFF_MASTER|IFF_SLAVE|IFF_RUNNING|IFF_LOWER_UP|IFF_DORMANT) - -/* Private (from user) interface flags (netdevice->priv_flags). */ -#define IFF_802_1Q_VLAN 0x1 /* 802.1Q VLAN device. */ -#define IFF_EBRIDGE 0x2 /* Ethernet bridging device. */ -#define IFF_SLAVE_INACTIVE 0x4 /* bonding slave not the curr. active */ -#define IFF_MASTER_8023AD 0x8 /* bonding master, 802.3ad. */ -#define IFF_MASTER_ALB 0x10 /* bonding master, balance-alb. */ -#define IFF_BONDING 0x20 /* bonding master or slave */ -#define IFF_SLAVE_NEEDARP 0x40 /* need ARPs for validation */ -#define IFF_ISATAP 0x80 /* ISATAP interface (RFC4214) */ -#define IFF_MASTER_ARPMON 0x100 /* bonding master, ARP mon in use */ -#define IFF_WAN_HDLC 0x200 /* WAN HDLC device */ -#define IFF_XMIT_DST_RELEASE 0x400 /* dev_hard_start_xmit() is allowed to - * release skb->dst - */ -#define IFF_DONT_BRIDGE 0x800 /* disallow bridging this ether dev */ -#define IFF_DISABLE_NETPOLL 0x1000 /* disable netpoll at run-time */ -#define IFF_MACVLAN_PORT 0x2000 /* device used as macvlan port */ -#define IFF_BRIDGE_PORT 0x4000 /* device used as bridge port */ -#define IFF_OVS_DATAPATH 0x8000 /* device used as Open vSwitch - * datapath port */ -#define IFF_TX_SKB_SHARING 0x10000 /* The interface supports sharing - * skbs on transmit */ -#define IFF_UNICAST_FLT 0x20000 /* Supports unicast filtering */ -#define IFF_TEAM_PORT 0x40000 /* device used as team port */ -#define IFF_SUPP_NOFCS 0x80000 /* device supports sending custom FCS */ -#define IFF_LIVE_ADDR_CHANGE 0x100000 /* device supports hardware address - * change when it's running */ - - -#define IF_GET_IFACE 0x0001 /* for querying only */ -#define IF_GET_PROTO 0x0002 - -/* For definitions see hdlc.h */ -#define IF_IFACE_V35 0x1000 /* V.35 serial interface */ -#define IF_IFACE_V24 0x1001 /* V.24 serial interface */ -#define IF_IFACE_X21 0x1002 /* X.21 serial interface */ -#define IF_IFACE_T1 0x1003 /* T1 telco serial interface */ -#define IF_IFACE_E1 0x1004 /* E1 telco serial interface */ -#define IF_IFACE_SYNC_SERIAL 0x1005 /* can't be set by software */ -#define IF_IFACE_X21D 0x1006 /* X.21 Dual Clocking (FarSite) */ - -/* For definitions see hdlc.h */ -#define IF_PROTO_HDLC 0x2000 /* raw HDLC protocol */ -#define IF_PROTO_PPP 0x2001 /* PPP protocol */ -#define IF_PROTO_CISCO 0x2002 /* Cisco HDLC protocol */ -#define IF_PROTO_FR 0x2003 /* Frame Relay protocol */ -#define IF_PROTO_FR_ADD_PVC 0x2004 /* Create FR PVC */ -#define IF_PROTO_FR_DEL_PVC 0x2005 /* Delete FR PVC */ -#define IF_PROTO_X25 0x2006 /* X.25 */ -#define IF_PROTO_HDLC_ETH 0x2007 /* raw HDLC, Ethernet emulation */ -#define IF_PROTO_FR_ADD_ETH_PVC 0x2008 /* Create FR Ethernet-bridged PVC */ -#define IF_PROTO_FR_DEL_ETH_PVC 0x2009 /* Delete FR Ethernet-bridged PVC */ -#define IF_PROTO_FR_PVC 0x200A /* for reading PVC status */ -#define IF_PROTO_FR_ETH_PVC 0x200B -#define IF_PROTO_RAW 0x200C /* RAW Socket */ - -/* RFC 2863 operational status */ -enum { - IF_OPER_UNKNOWN, - IF_OPER_NOTPRESENT, - IF_OPER_DOWN, - IF_OPER_LOWERLAYERDOWN, - IF_OPER_TESTING, - IF_OPER_DORMANT, - IF_OPER_UP, -}; - -/* link modes */ -enum { - IF_LINK_MODE_DEFAULT, - IF_LINK_MODE_DORMANT, /* limit upward transition to dormant */ -}; - -/* - * Device mapping structure. I'd just gone off and designed a - * beautiful scheme using only loadable modules with arguments - * for driver options and along come the PCMCIA people 8) - * - * Ah well. The get() side of this is good for WDSETUP, and it'll - * be handy for debugging things. The set side is fine for now and - * being very small might be worth keeping for clean configuration. - */ - -struct ifmap { - unsigned long mem_start; - unsigned long mem_end; - unsigned short base_addr; - unsigned char irq; - unsigned char dma; - unsigned char port; - /* 3 bytes spare */ -}; - -struct if_settings { - unsigned int type; /* Type of physical device or protocol */ - unsigned int size; /* Size of the data allocated by the caller */ - union { - /* {atm/eth/dsl}_settings anyone ? */ - raw_hdlc_proto __user *raw_hdlc; - cisco_proto __user *cisco; - fr_proto __user *fr; - fr_proto_pvc __user *fr_pvc; - fr_proto_pvc_info __user *fr_pvc_info; - - /* interface settings */ - sync_serial_settings __user *sync; - te1_settings __user *te1; - } ifs_ifsu; -}; - -/* - * Interface request structure used for socket - * ioctl's. All interface ioctl's must have parameter - * definitions which begin with ifr_name. The - * remainder may be interface specific. - */ - -struct ifreq { -#define IFHWADDRLEN 6 - union - { - char ifrn_name[IFNAMSIZ]; /* if name, e.g. "en0" */ - } ifr_ifrn; - - union { - struct sockaddr ifru_addr; - struct sockaddr ifru_dstaddr; - struct sockaddr ifru_broadaddr; - struct sockaddr ifru_netmask; - struct sockaddr ifru_hwaddr; - short ifru_flags; - int ifru_ivalue; - int ifru_mtu; - struct ifmap ifru_map; - char ifru_slave[IFNAMSIZ]; /* Just fits the size */ - char ifru_newname[IFNAMSIZ]; - void __user * ifru_data; - struct if_settings ifru_settings; - } ifr_ifru; -}; - -#define ifr_name ifr_ifrn.ifrn_name /* interface name */ -#define ifr_hwaddr ifr_ifru.ifru_hwaddr /* MAC address */ -#define ifr_addr ifr_ifru.ifru_addr /* address */ -#define ifr_dstaddr ifr_ifru.ifru_dstaddr /* other end of p-p lnk */ -#define ifr_broadaddr ifr_ifru.ifru_broadaddr /* broadcast address */ -#define ifr_netmask ifr_ifru.ifru_netmask /* interface net mask */ -#define ifr_flags ifr_ifru.ifru_flags /* flags */ -#define ifr_metric ifr_ifru.ifru_ivalue /* metric */ -#define ifr_mtu ifr_ifru.ifru_mtu /* mtu */ -#define ifr_map ifr_ifru.ifru_map /* device map */ -#define ifr_slave ifr_ifru.ifru_slave /* slave device */ -#define ifr_data ifr_ifru.ifru_data /* for use by interface */ -#define ifr_ifindex ifr_ifru.ifru_ivalue /* interface index */ -#define ifr_bandwidth ifr_ifru.ifru_ivalue /* link bandwidth */ -#define ifr_qlen ifr_ifru.ifru_ivalue /* Queue length */ -#define ifr_newname ifr_ifru.ifru_newname /* New name */ -#define ifr_settings ifr_ifru.ifru_settings /* Device/proto settings*/ - -/* - * Structure used in SIOCGIFCONF request. - * Used to retrieve interface configuration - * for machine (useful for programs which - * must know all networks accessible). - */ - -struct ifconf { - int ifc_len; /* size of buffer */ - union { - char __user *ifcu_buf; - struct ifreq __user *ifcu_req; - } ifc_ifcu; -}; -#define ifc_buf ifc_ifcu.ifcu_buf /* buffer address */ -#define ifc_req ifc_ifcu.ifcu_req /* array of structures */ - -#endif /* _LINUX_IF_H */ -- cgit v1.2.3