From cd1678f963298a9e777f3edb72d28bc18a3a32c2 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Tue, 29 May 2012 12:41:19 +0200 Subject: iio: frequency: New driver for AD9523 SPI Low Jitter Clock Generator Changes since V1: Apply Jonathan's review feedback: Revise device status attribute names, and split documentation into two sections. Add additional comments, and fix indention issues. Remove pointless zero initializations. Revise return value handling. Simplify some code sections. Split store_eeprom and sync handling into separate functions. Use strtobool where applicable. Document platform data structures using kernel-doc style. Use dev_to_iio_dev write_raw IIO_CHAN_INFO_FREQUENCY: Reject values <= 0 Make patch target drivers/iio Changes since V2: Use for_each_clear_bit() and __set_bit() where applicable. Add descriptive comment. Avoid temporary for struct regulator. spi_device_id name use ad9523-1, ad9523 will be added later. Signed-off-by: Michael Hennerich Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- include/linux/iio/frequency/ad9523.h | 195 +++++++++++++++++++++++++++++++++++ 1 file changed, 195 insertions(+) create mode 100644 include/linux/iio/frequency/ad9523.h (limited to 'include/linux/iio') diff --git a/include/linux/iio/frequency/ad9523.h b/include/linux/iio/frequency/ad9523.h new file mode 100644 index 000000000000..12ce3ee427fd --- /dev/null +++ b/include/linux/iio/frequency/ad9523.h @@ -0,0 +1,195 @@ +/* + * AD9523 SPI Low Jitter Clock Generator + * + * Copyright 2012 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#ifndef IIO_FREQUENCY_AD9523_H_ +#define IIO_FREQUENCY_AD9523_H_ + +enum outp_drv_mode { + TRISTATE, + LVPECL_8mA, + LVDS_4mA, + LVDS_7mA, + HSTL0_16mA, + HSTL1_8mA, + CMOS_CONF1, + CMOS_CONF2, + CMOS_CONF3, + CMOS_CONF4, + CMOS_CONF5, + CMOS_CONF6, + CMOS_CONF7, + CMOS_CONF8, + CMOS_CONF9 +}; + +enum ref_sel_mode { + NONEREVERTIVE_STAY_ON_REFB, + REVERT_TO_REFA, + SELECT_REFA, + SELECT_REFB, + EXT_REF_SEL +}; + +/** + * struct ad9523_channel_spec - Output channel configuration + * + * @channel_num: Output channel number. + * @divider_output_invert_en: Invert the polarity of the output clock. + * @sync_ignore_en: Ignore chip-level SYNC signal. + * @low_power_mode_en: Reduce power used in the differential output modes. + * @use_alt_clock_src: Channel divider uses alternative clk source. + * @output_dis: Disables, powers down the entire channel. + * @driver_mode: Output driver mode (logic level family). + * @divider_phase: Divider initial phase after a SYNC. Range 0..63 + LSB = 1/2 of a period of the divider input clock. + * @channel_divider: 10-bit channel divider. + * @extended_name: Optional descriptive channel name. + */ + +struct ad9523_channel_spec { + unsigned channel_num; + bool divider_output_invert_en; + bool sync_ignore_en; + bool low_power_mode_en; + /* CH0..CH3 VCXO, CH4..CH9 VCO2 */ + bool use_alt_clock_src; + bool output_dis; + enum outp_drv_mode driver_mode; + unsigned char divider_phase; + unsigned short channel_divider; + char extended_name[16]; +}; + +enum pll1_rzero_resistor { + RZERO_883_OHM, + RZERO_677_OHM, + RZERO_341_OHM, + RZERO_135_OHM, + RZERO_10_OHM, + RZERO_USE_EXT_RES = 8, +}; + +enum rpole2_resistor { + RPOLE2_900_OHM, + RPOLE2_450_OHM, + RPOLE2_300_OHM, + RPOLE2_225_OHM, +}; + +enum rzero_resistor { + RZERO_3250_OHM, + RZERO_2750_OHM, + RZERO_2250_OHM, + RZERO_2100_OHM, + RZERO_3000_OHM, + RZERO_2500_OHM, + RZERO_2000_OHM, + RZERO_1850_OHM, +}; + +enum cpole1_capacitor { + CPOLE1_0_PF, + CPOLE1_8_PF, + CPOLE1_16_PF, + CPOLE1_24_PF, + _CPOLE1_24_PF, /* place holder */ + CPOLE1_32_PF, + CPOLE1_40_PF, + CPOLE1_48_PF, +}; + +/** + * struct ad9523_platform_data - platform specific information + * + * @vcxo_freq: External VCXO frequency in Hz + * @refa_diff_rcv_en: REFA differential/single-ended input selection. + * @refb_diff_rcv_en: REFB differential/single-ended input selection. + * @zd_in_diff_en: Zero Delay differential/single-ended input selection. + * @osc_in_diff_en: OSC differential/ single-ended input selection. + * @refa_cmos_neg_inp_en: REFA single-ended neg./pos. input enable. + * @refb_cmos_neg_inp_en: REFB single-ended neg./pos. input enable. + * @zd_in_cmos_neg_inp_en: Zero Delay single-ended neg./pos. input enable. + * @osc_in_cmos_neg_inp_en: OSC single-ended neg./pos. input enable. + * @refa_r_div: PLL1 10-bit REFA R divider. + * @refb_r_div: PLL1 10-bit REFB R divider. + * @pll1_feedback_div: PLL1 10-bit Feedback N divider. + * @pll1_charge_pump_current_nA: Magnitude of PLL1 charge pump current (nA). + * @zero_delay_mode_internal_en: Internal, external Zero Delay mode selection. + * @osc_in_feedback_en: PLL1 feedback path, local feedback from + * the OSC_IN receiver or zero delay mode + * @pll1_loop_filter_rzero: PLL1 Loop Filter Zero Resistor selection. + * @ref_mode: Reference selection mode. + * @pll2_charge_pump_current_nA: Magnitude of PLL2 charge pump current (nA). + * @pll2_ndiv_a_cnt: PLL2 Feedback N-divider, A Counter, range 0..4. + * @pll2_ndiv_b_cnt: PLL2 Feedback N-divider, B Counter, range 0..63. + * @pll2_freq_doubler_en: PLL2 frequency doubler enable. + * @pll2_r2_div: PLL2 R2 divider, range 0..31. + * @pll2_vco_diff_m1: VCO1 divider, range 3..5. + * @pll2_vco_diff_m2: VCO2 divider, range 3..5. + * @rpole2: PLL2 loop filter Rpole resistor value. + * @rzero: PLL2 loop filter Rzero resistor value. + * @cpole1: PLL2 loop filter Cpole capacitor value. + * @rzero_bypass_en: PLL2 loop filter Rzero bypass enable. + * @num_channels: Array size of struct ad9523_channel_spec. + * @channels: Pointer to channel array. + * @name: Optional alternative iio device name. + */ + +struct ad9523_platform_data { + unsigned long vcxo_freq; + + /* Differential/ Single-Ended Input Configuration */ + bool refa_diff_rcv_en; + bool refb_diff_rcv_en; + bool zd_in_diff_en; + bool osc_in_diff_en; + + /* + * Valid if differential input disabled + * if false defaults to pos input + */ + bool refa_cmos_neg_inp_en; + bool refb_cmos_neg_inp_en; + bool zd_in_cmos_neg_inp_en; + bool osc_in_cmos_neg_inp_en; + + /* PLL1 Setting */ + unsigned short refa_r_div; + unsigned short refb_r_div; + unsigned short pll1_feedback_div; + unsigned short pll1_charge_pump_current_nA; + bool zero_delay_mode_internal_en; + bool osc_in_feedback_en; + enum pll1_rzero_resistor pll1_loop_filter_rzero; + + /* Reference */ + enum ref_sel_mode ref_mode; + + /* PLL2 Setting */ + unsigned int pll2_charge_pump_current_nA; + unsigned char pll2_ndiv_a_cnt; + unsigned char pll2_ndiv_b_cnt; + bool pll2_freq_doubler_en; + unsigned char pll2_r2_div; + unsigned char pll2_vco_diff_m1; /* 3..5 */ + unsigned char pll2_vco_diff_m2; /* 3..5 */ + + /* Loop Filter PLL2 */ + enum rpole2_resistor rpole2; + enum rzero_resistor rzero; + enum cpole1_capacitor cpole1; + bool rzero_bypass_en; + + /* Output Channel Configuration */ + int num_channels; + struct ad9523_channel_spec *channels; + + char name[SPI_NAME_SIZE]; +}; + +#endif /* IIO_FREQUENCY_AD9523_H_ */ -- cgit v1.2.3 From e31166f0fd48478866ee9661c36789126435ebe8 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Tue, 29 May 2012 12:41:20 +0200 Subject: iio: frequency: New driver for Analog Devices ADF4350/ADF4351 Wideband Synthesizers Changes since V1: Apply Jonathan's review feedback: Introduce and use IIO_ALTVOLTAGE. Fix up comments and documentation. Remove dead code. Reorder some code fragments. Add missing iio_device_free. Convert to new API. Fix-up out of staging includes. Removed pll_locked attribute. Changes since V2: Use module_spi_driver. adf4350_remove: move gpio_free after regulator. target patch to drivers/iio Signed-off-by: Michael Hennerich Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- include/linux/iio/frequency/adf4350.h | 126 ++++++++++++++++++++++++++++++++++ 1 file changed, 126 insertions(+) create mode 100644 include/linux/iio/frequency/adf4350.h (limited to 'include/linux/iio') diff --git a/include/linux/iio/frequency/adf4350.h b/include/linux/iio/frequency/adf4350.h new file mode 100644 index 000000000000..b76b4a87065e --- /dev/null +++ b/include/linux/iio/frequency/adf4350.h @@ -0,0 +1,126 @@ +/* + * ADF4350/ADF4351 SPI PLL driver + * + * Copyright 2012 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#ifndef IIO_PLL_ADF4350_H_ +#define IIO_PLL_ADF4350_H_ + +/* Registers */ +#define ADF4350_REG0 0 +#define ADF4350_REG1 1 +#define ADF4350_REG2 2 +#define ADF4350_REG3 3 +#define ADF4350_REG4 4 +#define ADF4350_REG5 5 + +/* REG0 Bit Definitions */ +#define ADF4350_REG0_FRACT(x) (((x) & 0xFFF) << 3) +#define ADF4350_REG0_INT(x) (((x) & 0xFFFF) << 15) + +/* REG1 Bit Definitions */ +#define ADF4350_REG1_MOD(x) (((x) & 0xFFF) << 3) +#define ADF4350_REG1_PHASE(x) (((x) & 0xFFF) << 15) +#define ADF4350_REG1_PRESCALER (1 << 27) + +/* REG2 Bit Definitions */ +#define ADF4350_REG2_COUNTER_RESET_EN (1 << 3) +#define ADF4350_REG2_CP_THREESTATE_EN (1 << 4) +#define ADF4350_REG2_POWER_DOWN_EN (1 << 5) +#define ADF4350_REG2_PD_POLARITY_POS (1 << 6) +#define ADF4350_REG2_LDP_6ns (1 << 7) +#define ADF4350_REG2_LDP_10ns (0 << 7) +#define ADF4350_REG2_LDF_FRACT_N (0 << 8) +#define ADF4350_REG2_LDF_INT_N (1 << 8) +#define ADF4350_REG2_CHARGE_PUMP_CURR_uA(x) (((((x)-312) / 312) & 0xF) << 9) +#define ADF4350_REG2_DOUBLE_BUFF_EN (1 << 13) +#define ADF4350_REG2_10BIT_R_CNT(x) ((x) << 14) +#define ADF4350_REG2_RDIV2_EN (1 << 24) +#define ADF4350_REG2_RMULT2_EN (1 << 25) +#define ADF4350_REG2_MUXOUT(x) ((x) << 26) +#define ADF4350_REG2_NOISE_MODE(x) ((x) << 29) +#define ADF4350_MUXOUT_THREESTATE 0 +#define ADF4350_MUXOUT_DVDD 1 +#define ADF4350_MUXOUT_GND 2 +#define ADF4350_MUXOUT_R_DIV_OUT 3 +#define ADF4350_MUXOUT_N_DIV_OUT 4 +#define ADF4350_MUXOUT_ANALOG_LOCK_DETECT 5 +#define ADF4350_MUXOUT_DIGITAL_LOCK_DETECT 6 + +/* REG3 Bit Definitions */ +#define ADF4350_REG3_12BIT_CLKDIV(x) ((x) << 3) +#define ADF4350_REG3_12BIT_CLKDIV_MODE(x) ((x) << 16) +#define ADF4350_REG3_12BIT_CSR_EN (1 << 18) +#define ADF4351_REG3_CHARGE_CANCELLATION_EN (1 << 21) +#define ADF4351_REG3_ANTI_BACKLASH_3ns_EN (1 << 22) +#define ADF4351_REG3_BAND_SEL_CLOCK_MODE_HIGH (1 << 23) + +/* REG4 Bit Definitions */ +#define ADF4350_REG4_OUTPUT_PWR(x) ((x) << 3) +#define ADF4350_REG4_RF_OUT_EN (1 << 5) +#define ADF4350_REG4_AUX_OUTPUT_PWR(x) ((x) << 6) +#define ADF4350_REG4_AUX_OUTPUT_EN (1 << 8) +#define ADF4350_REG4_AUX_OUTPUT_FUND (1 << 9) +#define ADF4350_REG4_AUX_OUTPUT_DIV (0 << 9) +#define ADF4350_REG4_MUTE_TILL_LOCK_EN (1 << 10) +#define ADF4350_REG4_VCO_PWRDOWN_EN (1 << 11) +#define ADF4350_REG4_8BIT_BAND_SEL_CLKDIV(x) ((x) << 12) +#define ADF4350_REG4_RF_DIV_SEL(x) ((x) << 20) +#define ADF4350_REG4_FEEDBACK_DIVIDED (0 << 23) +#define ADF4350_REG4_FEEDBACK_FUND (1 << 23) + +/* REG5 Bit Definitions */ +#define ADF4350_REG5_LD_PIN_MODE_LOW (0 << 22) +#define ADF4350_REG5_LD_PIN_MODE_DIGITAL (1 << 22) +#define ADF4350_REG5_LD_PIN_MODE_HIGH (3 << 22) + +/* Specifications */ +#define ADF4350_MAX_OUT_FREQ 4400000000ULL /* Hz */ +#define ADF4350_MIN_OUT_FREQ 137500000 /* Hz */ +#define ADF4351_MIN_OUT_FREQ 34375000 /* Hz */ +#define ADF4350_MIN_VCO_FREQ 2200000000ULL /* Hz */ +#define ADF4350_MAX_FREQ_45_PRESC 3000000000ULL /* Hz */ +#define ADF4350_MAX_FREQ_PFD 32000000 /* Hz */ +#define ADF4350_MAX_BANDSEL_CLK 125000 /* Hz */ +#define ADF4350_MAX_FREQ_REFIN 250000000 /* Hz */ +#define ADF4350_MAX_MODULUS 4095 + +/** + * struct adf4350_platform_data - platform specific information + * @name: Optional device name. + * @clkin: REFin frequency in Hz. + * @channel_spacing: Channel spacing in Hz (influences MODULUS). + * @power_up_frequency: Optional, If set in Hz the PLL tunes to the desired + * frequency on probe. + * @ref_div_factor: Optional, if set the driver skips dynamic calculation + * and uses this default value instead. + * @ref_doubler_en: Enables reference doubler. + * @ref_div2_en: Enables reference divider. + * @r2_user_settings: User defined settings for ADF4350/1 REGISTER_2. + * @r3_user_settings: User defined settings for ADF4350/1 REGISTER_3. + * @r4_user_settings: User defined settings for ADF4350/1 REGISTER_4. + * @gpio_lock_detect: Optional, if set with a valid GPIO number, + * pll lock state is tested upon read. + * If not used - set to -1. + */ + +struct adf4350_platform_data { + char name[32]; + unsigned long clkin; + unsigned long channel_spacing; + unsigned long long power_up_frequency; + + unsigned short ref_div_factor; /* 10-bit R counter */ + bool ref_doubler_en; + bool ref_div2_en; + + unsigned r2_user_settings; + unsigned r3_user_settings; + unsigned r4_user_settings; + int gpio_lock_detect; +}; + +#endif /* IIO_PLL_ADF4350_H_ */ -- cgit v1.2.3 From e4e8b7765867e8f4705bcc18b8930edbe0e4ef3c Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 4 Jun 2012 10:50:02 +0200 Subject: iio: Add iio_device_get() This patch add the iio_device_get() function, which increases the reference count of a iio device. The matching function to decrease the reference count - iio_device_put() - already exists. Signed-off-by: Lars-Peter Clausen Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- include/linux/iio/iio.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include/linux/iio') diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index 3a4f6a3ab80d..3238fa3374f7 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -438,6 +438,17 @@ static inline struct iio_dev *dev_to_iio_dev(struct device *dev) return container_of(dev, struct iio_dev, dev); } +/** + * iio_device_get() - increment reference count for the device + * @indio_dev: IIO device structure + * + * Returns: The passed IIO device + **/ +static inline struct iio_dev *iio_device_get(struct iio_dev *indio_dev) +{ + return indio_dev ? dev_to_iio_dev(get_device(&indio_dev->dev)) : NULL; +} + /* Can we make this smaller? */ #define IIO_ALIGN L1_CACHE_BYTES /** -- cgit v1.2.3 From 5212cc8a9d833791a7aec566db136e78951f203d Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 4 Jun 2012 11:36:11 +0200 Subject: iio: Add helper functions for enum style channel attributes We often have the case were we do have a enum style channel attribute. These attributes have in common that they are a list of string values which usually map in a 1-to-1 fashion to integer values. This patch implements some common helper code for implementing enum style channel attributes using extended channel attributes. The helper functions take care of converting between the string and integer values, as well providing a function for "_available" attributes which list all available enum items. Signed-off-by: Lars-Peter Clausen Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- include/linux/iio/iio.h | 64 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 64 insertions(+) (limited to 'include/linux/iio') diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index 3238fa3374f7..944c63511731 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -129,6 +129,70 @@ struct iio_chan_spec_ext_info { uintptr_t private; }; +/** + * struct iio_enum - Enum channel info attribute + * items: A array of strings. + * num_items: Length of the item array. + * set: Set callback function, may be NULL. + * get: Get callback function, may be NULL. + * + * The iio_enum struct can be used to implement enum style channel attributes. + * Enum style attributes are those which have a set of strings which map to + * unsigned integer values. The IIO enum helper code takes care of mapping + * between value and string as well as generating a "_available" file which + * contains a list of all available items. The set callback will be called when + * the attribute is updated. The last parameter is the index to the newly + * activated item. The get callback will be used to query the currently active + * item and is supposed to return the index for it. + */ +struct iio_enum { + const char * const *items; + unsigned int num_items; + int (*set)(struct iio_dev *, const struct iio_chan_spec *, unsigned int); + int (*get)(struct iio_dev *, const struct iio_chan_spec *); +}; + +ssize_t iio_enum_available_read(struct iio_dev *indio_dev, + uintptr_t priv, const struct iio_chan_spec *chan, char *buf); +ssize_t iio_enum_read(struct iio_dev *indio_dev, + uintptr_t priv, const struct iio_chan_spec *chan, char *buf); +ssize_t iio_enum_write(struct iio_dev *indio_dev, + uintptr_t priv, const struct iio_chan_spec *chan, const char *buf, + size_t len); + +/** + * IIO_ENUM() - Initialize enum extended channel attribute + * @_name: Attribute name + * @_shared: Whether the attribute is shared between all channels + * @_e: Pointer to a iio_enum struct + * + * This should usually be used together with IIO_ENUM_AVAILABLE() + */ +#define IIO_ENUM(_name, _shared, _e) \ +{ \ + .name = (_name), \ + .shared = (_shared), \ + .read = iio_enum_read, \ + .write = iio_enum_write, \ + .private = (uintptr_t)(_e), \ +} + +/** + * IIO_ENUM_AVAILABLE() - Initialize enum available extended channel attribute + * @_name: Attribute name ("_available" will be appended to the name) + * @_e: Pointer to a iio_enum struct + * + * Creates a read only attribute which list all the available enum items in a + * space separated list. This should usually be used together with IIO_ENUM() + */ +#define IIO_ENUM_AVAILABLE(_name, _e) \ +{ \ + .name = (_name "_available"), \ + .shared = true, \ + .read = iio_enum_available_read, \ + .private = (uintptr_t)(_e), \ +} + /** * struct iio_chan_spec - specification of a single channel * @type: What type of measurement is the channel making. -- cgit v1.2.3 From dbdc025bb239ce62c9b4d28c459a98f22ce9ec0a Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 4 Jun 2012 11:36:28 +0200 Subject: staging:iio: Move DAC drivers out of staging The IIO DAC drivers are in a reasonably good shape. They all make use of channel spec and non of them provides non-documented sysfs attributes. Code style should be OK as well, both checkpatch and coccicheck only report trivial issues. So lets move the whole folder out of staging. Signed-off-by: Lars-Peter Clausen Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- include/linux/iio/dac/ad5421.h | 28 ++++++++++++++++++++++++++++ include/linux/iio/dac/ad5504.h | 16 ++++++++++++++++ include/linux/iio/dac/ad5791.h | 25 +++++++++++++++++++++++++ include/linux/iio/dac/max517.h | 15 +++++++++++++++ 4 files changed, 84 insertions(+) create mode 100644 include/linux/iio/dac/ad5421.h create mode 100644 include/linux/iio/dac/ad5504.h create mode 100644 include/linux/iio/dac/ad5791.h create mode 100644 include/linux/iio/dac/max517.h (limited to 'include/linux/iio') diff --git a/include/linux/iio/dac/ad5421.h b/include/linux/iio/dac/ad5421.h new file mode 100644 index 000000000000..8fd8f057a890 --- /dev/null +++ b/include/linux/iio/dac/ad5421.h @@ -0,0 +1,28 @@ +#ifndef __IIO_DAC_AD5421_H__ +#define __IIO_DAC_AD5421_H__ + +/** + * enum ad5421_current_range - Current range the AD5421 is configured for. + * @AD5421_CURRENT_RANGE_4mA_20mA: 4 mA to 20 mA (RANGE1,0 pins = 00) + * @AD5421_CURRENT_RANGE_3mA8_21mA: 3.8 mA to 21 mA (RANGE1,0 pins = x1) + * @AD5421_CURRENT_RANGE_3mA2_24mA: 3.2 mA to 24 mA (RANGE1,0 pins = 10) + */ + +enum ad5421_current_range { + AD5421_CURRENT_RANGE_4mA_20mA, + AD5421_CURRENT_RANGE_3mA8_21mA, + AD5421_CURRENT_RANGE_3mA2_24mA, +}; + +/** + * struct ad5421_platform_data - AD5421 DAC driver platform data + * @external_vref: whether an external reference voltage is used or not + * @current_range: Current range the AD5421 is configured for + */ + +struct ad5421_platform_data { + bool external_vref; + enum ad5421_current_range current_range; +}; + +#endif diff --git a/include/linux/iio/dac/ad5504.h b/include/linux/iio/dac/ad5504.h new file mode 100644 index 000000000000..43895376a9ca --- /dev/null +++ b/include/linux/iio/dac/ad5504.h @@ -0,0 +1,16 @@ +/* + * AD5504 SPI DAC driver + * + * Copyright 2011 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#ifndef SPI_AD5504_H_ +#define SPI_AD5504_H_ + +struct ad5504_platform_data { + u16 vref_mv; +}; + +#endif /* SPI_AD5504_H_ */ diff --git a/include/linux/iio/dac/ad5791.h b/include/linux/iio/dac/ad5791.h new file mode 100644 index 000000000000..45ee281c6660 --- /dev/null +++ b/include/linux/iio/dac/ad5791.h @@ -0,0 +1,25 @@ +/* + * AD5791 SPI DAC driver + * + * Copyright 2011 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#ifndef SPI_AD5791_H_ +#define SPI_AD5791_H_ + +/** + * struct ad5791_platform_data - platform specific information + * @vref_pos_mv: Vdd Positive Analog Supply Volatge (mV) + * @vref_neg_mv: Vdd Negative Analog Supply Volatge (mV) + * @use_rbuf_gain2: ext. amplifier connected in gain of two configuration + */ + +struct ad5791_platform_data { + u16 vref_pos_mv; + u16 vref_neg_mv; + bool use_rbuf_gain2; +}; + +#endif /* SPI_AD5791_H_ */ diff --git a/include/linux/iio/dac/max517.h b/include/linux/iio/dac/max517.h new file mode 100644 index 000000000000..f6d1d252f08d --- /dev/null +++ b/include/linux/iio/dac/max517.h @@ -0,0 +1,15 @@ +/* + * MAX517 DAC driver + * + * Copyright 2011 Roland Stigge + * + * Licensed under the GPL-2 or later. + */ +#ifndef IIO_DAC_MAX517_H_ +#define IIO_DAC_MAX517_H_ + +struct max517_platform_data { + u16 vref_mv[2]; +}; + +#endif /* IIO_DAC_MAX517_H_ */ -- cgit v1.2.3 From cf35ad61aca2c0c8983fa1e140c901f6588aba7e Mon Sep 17 00:00:00 2001 From: Peter Meerwald Date: Fri, 8 Jun 2012 18:06:45 +0200 Subject: iio: add mcp4725 I2C DAC driver v5: * fix warnings (Jonathan Cameron) v4: * remove unused indio_dev pointer in mcp4725_data (Jonathan Cameron) * use u16 instead of unsigned short in mcp4725_data (Jonathan Cameron) * #include mcp4725.h from linux/iio/dac/ v3: * move from staging to drivers/iio * switch to chan_spec * dev_get_drvdata() -> dev_to_iio_dev() * annotate probe() and remove() with __devinit and __devexit v2 (based on comments from Jonathan Cameron and Lars-Peter Clausen): * did NOT switch to chan_spec yet * rebase to staging-next tree, update iio header locations * dropped dac.h #include, not needed * strict_strtol() -> kstrtol() * call iio_device_unregister() in remove() * everything in one patch Signed-off-by: Peter Meerwald Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- include/linux/iio/dac/mcp4725.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) create mode 100644 include/linux/iio/dac/mcp4725.h (limited to 'include/linux/iio') diff --git a/include/linux/iio/dac/mcp4725.h b/include/linux/iio/dac/mcp4725.h new file mode 100644 index 000000000000..91530e6611e9 --- /dev/null +++ b/include/linux/iio/dac/mcp4725.h @@ -0,0 +1,16 @@ +/* + * MCP4725 DAC driver + * + * Copyright (C) 2012 Peter Meerwald + * + * Licensed under the GPL-2 or later. + */ + +#ifndef IIO_DAC_MCP4725_H_ +#define IIO_DAC_MCP4725_H_ + +struct mcp4725_platform_data { + u16 vref_mv; +}; + +#endif /* IIO_DAC_MCP4725_H_ */ -- cgit v1.2.3 From 988bb033d703c8b2e0e71c63f3f55616a0220ced Mon Sep 17 00:00:00 2001 From: Peter Meerwald Date: Tue, 12 Jun 2012 14:39:37 +0200 Subject: iio: drop comment about 'real' channels Signed-off-by: Peter Meerwald Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- include/linux/iio/types.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux/iio') diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h index 1b073b1cc7c2..d086736a9033 100644 --- a/include/linux/iio/types.h +++ b/include/linux/iio/types.h @@ -11,7 +11,6 @@ #define _IIO_TYPES_H_ enum iio_chan_type { - /* real channel types */ IIO_VOLTAGE, IIO_CURRENT, IIO_POWER, -- cgit v1.2.3 From 1787948873fd2ca730fb5891b6a2ade510367ace Mon Sep 17 00:00:00 2001 From: Peter Meerwald Date: Tue, 12 Jun 2012 15:38:45 +0200 Subject: iio: fix typos in iio.h v2: * "used in in-kernel" (Jonathan Cameron) Signed-off-by: Peter Meerwald Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- include/linux/iio/iio.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux/iio') diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index 944c63511731..01afaa08ff21 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -131,7 +131,7 @@ struct iio_chan_spec_ext_info { /** * struct iio_enum - Enum channel info attribute - * items: A array of strings. + * items: An array of strings. * num_items: Length of the item array. * set: Set callback function, may be NULL. * get: Get callback function, may be NULL. @@ -218,7 +218,7 @@ ssize_t iio_enum_write(struct iio_dev *indio_dev, * @extend_name: Allows labeling of channel attributes with an * informative name. Note this has no effect codes etc, * unlike modifiers. - * @datasheet_name: A name used in in kernel mapping of channels. It should + * @datasheet_name: A name used in in-kernel mapping of channels. It should * correspond to the first name that the channel is referred * to by in the datasheet (e.g. IND), or the nearest * possible compound name (e.g. IND-INC). @@ -393,7 +393,7 @@ struct iio_buffer_setup_ops { * @trig: [INTERN] current device trigger (buffer modes) * @pollfunc: [DRIVER] function run on trigger being received * @channels: [DRIVER] channel specification structure table - * @num_channels: [DRIVER] number of chanels specified in @channels. + * @num_channels: [DRIVER] number of channels specified in @channels. * @channel_attr_list: [INTERN] keep track of automatically created channel * attributes * @chan_attr_group: [INTERN] group for all attrs in base directory -- cgit v1.2.3 From a16561c6f713630270b905297f3eedf02db7fa98 Mon Sep 17 00:00:00 2001 From: Peter Meerwald Date: Tue, 12 Jun 2012 15:38:46 +0200 Subject: iio: clarify channel and indexed in struct iio_chan_spec Signed-off-by: Peter Meerwald Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- include/linux/iio/iio.h | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'include/linux/iio') diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index 01afaa08ff21..9a9e6d52a6de 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -196,7 +196,7 @@ ssize_t iio_enum_write(struct iio_dev *indio_dev, /** * struct iio_chan_spec - specification of a single channel * @type: What type of measurement is the channel making. - * @channel: What number or name do we wish to assign the channel. + * @channel: What number do we wish to assign the channel. * @channel2: If there is a second number for a differential * channel then this is it. If modified is set then the * value here specifies the modifier. @@ -227,9 +227,8 @@ ssize_t iio_enum_write(struct iio_dev *indio_dev, * channel2. Examples are IIO_MOD_X for axial sensors about * the 'x' axis. * @indexed: Specify the channel has a numerical index. If not, - * the value in channel will be suppressed for attribute - * but not for event codes. Typically set it to 0 when - * the index is false. + * the channel index number will be suppressed for sysfs + * attributes but not for event codes. * @differential: Channel is differential. */ struct iio_chan_spec { -- cgit v1.2.3 From f4c349395e8ad4fe07f1222502568f0d9d5d1dfc Mon Sep 17 00:00:00 2001 From: Peter Meerwald Date: Tue, 12 Jun 2012 15:38:47 +0200 Subject: iio: mark struct iio_enum elements with @ in comment Signed-off-by: Peter Meerwald Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- include/linux/iio/iio.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'include/linux/iio') diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index 9a9e6d52a6de..bd3e7217ceee 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -131,10 +131,10 @@ struct iio_chan_spec_ext_info { /** * struct iio_enum - Enum channel info attribute - * items: An array of strings. - * num_items: Length of the item array. - * set: Set callback function, may be NULL. - * get: Get callback function, may be NULL. + * @items: An array of strings. + * @num_items: Length of the item array. + * @set: Set callback function, may be NULL. + * @get: Get callback function, may be NULL. * * The iio_enum struct can be used to implement enum style channel attributes. * Enum style attributes are those which have a set of strings which map to -- cgit v1.2.3 From 7dcd7b60724cab551deba54f31752fa8959efab4 Mon Sep 17 00:00:00 2001 From: Peter Meerwald Date: Tue, 12 Jun 2012 15:38:48 +0200 Subject: iio: cleanup iio/iio.h indentation of parameter description, fix parameter name (@dev -> @indio_dev) in comments, IIO device info structure -> IIO device structure Signed-off-by: Peter Meerwald Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- include/linux/iio/iio.h | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) (limited to 'include/linux/iio') diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index bd3e7217ceee..ae0cad908182 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -131,10 +131,10 @@ struct iio_chan_spec_ext_info { /** * struct iio_enum - Enum channel info attribute - * @items: An array of strings. - * @num_items: Length of the item array. - * @set: Set callback function, may be NULL. - * @get: Get callback function, may be NULL. + * @items: An array of strings. + * @num_items: Length of the item array. + * @set: Set callback function, may be NULL. + * @get: Get callback function, may be NULL. * * The iio_enum struct can be used to implement enum style channel attributes. * Enum style attributes are those which have a set of strings which map to @@ -162,9 +162,9 @@ ssize_t iio_enum_write(struct iio_dev *indio_dev, /** * IIO_ENUM() - Initialize enum extended channel attribute - * @_name: Attribute name - * @_shared: Whether the attribute is shared between all channels - * @_e: Pointer to a iio_enum struct + * @_name: Attribute name + * @_shared: Whether the attribute is shared between all channels + * @_e: Pointer to a iio_enum struct * * This should usually be used together with IIO_ENUM_AVAILABLE() */ @@ -179,8 +179,8 @@ ssize_t iio_enum_write(struct iio_dev *indio_dev, /** * IIO_ENUM_AVAILABLE() - Initialize enum available extended channel attribute - * @_name: Attribute name ("_available" will be appended to the name) - * @_e: Pointer to a iio_enum struct + * @_name: Attribute name ("_available" will be appended to the name) + * @_e: Pointer to a iio_enum struct * * Creates a read only attribute which list all the available enum items in a * space separated list. This should usually be used together with IIO_ENUM() @@ -201,7 +201,7 @@ ssize_t iio_enum_write(struct iio_dev *indio_dev, * channel then this is it. If modified is set then the * value here specifies the modifier. * @address: Driver specific identifier. - * @scan_index: Monotonic index to give ordering in scans when read + * @scan_index: Monotonic index to give ordering in scans when read * from a buffer. * @scan_type: Sign: 's' or 'u' to specify signed or unsigned * realbits: Number of valid bits of data @@ -211,7 +211,7 @@ ssize_t iio_enum_write(struct iio_dev *indio_dev, * endianness: little or big endian * @info_mask: What information is to be exported about this channel. * This includes calibbias, scale etc. - * @event_mask: What events can this channel produce. + * @event_mask: What events can this channel produce. * @ext_info: Array of extended info attributes for this channel. * The array is NULL terminated, the last element should * have it's name field set to NULL. @@ -482,7 +482,7 @@ extern struct bus_type iio_bus_type; /** * iio_device_put() - reference counted deallocation of struct device - * @dev: the iio_device containing the device + * @indio_dev: IIO device structure containing the device **/ static inline void iio_device_put(struct iio_dev *indio_dev) { @@ -492,7 +492,7 @@ static inline void iio_device_put(struct iio_dev *indio_dev) /** * dev_to_iio_dev() - Get IIO device struct from a device struct - * @dev: The device embedded in the IIO device + * @dev: The device embedded in the IIO device * * Note: The device must be a IIO device, otherwise the result is undefined. */ @@ -503,7 +503,7 @@ static inline struct iio_dev *dev_to_iio_dev(struct device *dev) /** * iio_device_get() - increment reference count for the device - * @indio_dev: IIO device structure + * @indio_dev: IIO device structure * * Returns: The passed IIO device **/ @@ -516,7 +516,7 @@ static inline struct iio_dev *iio_device_get(struct iio_dev *indio_dev) #define IIO_ALIGN L1_CACHE_BYTES /** * iio_device_alloc() - allocate an iio_dev from a driver - * @sizeof_priv: Space to allocate for private structure. + * @sizeof_priv: Space to allocate for private structure. **/ struct iio_dev *iio_device_alloc(int sizeof_priv); @@ -533,13 +533,13 @@ static inline struct iio_dev *iio_priv_to_dev(void *priv) /** * iio_device_free() - free an iio_dev from a driver - * @dev: the iio_dev associated with the device + * @indio_dev: the iio_dev associated with the device **/ void iio_device_free(struct iio_dev *indio_dev); /** * iio_buffer_enabled() - helper function to test if the buffer is enabled - * @indio_dev: IIO device info structure for device + * @indio_dev: IIO device structure for device **/ static inline bool iio_buffer_enabled(struct iio_dev *indio_dev) { @@ -549,7 +549,7 @@ static inline bool iio_buffer_enabled(struct iio_dev *indio_dev) /** * iio_get_debugfs_dentry() - helper function to get the debugfs_dentry - * @indio_dev: IIO device info structure for device + * @indio_dev: IIO device structure for device **/ #if defined(CONFIG_DEBUG_FS) static inline struct dentry *iio_get_debugfs_dentry(struct iio_dev *indio_dev) -- cgit v1.2.3 From 33e0c249801c6913b2bd102683ab65ab61e12952 Mon Sep 17 00:00:00 2001 From: Peter Meerwald Date: Fri, 15 Jun 2012 19:25:25 +0200 Subject: iio: iio/machine.h typo Signed-off-by: Peter Meerwald Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- include/linux/iio/machine.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux/iio') diff --git a/include/linux/iio/machine.h b/include/linux/iio/machine.h index 0b1f19bfdc44..400a453ff67b 100644 --- a/include/linux/iio/machine.h +++ b/include/linux/iio/machine.h @@ -14,7 +14,7 @@ * This is matched against the datasheet_name element * of struct iio_chan_spec. * @consumer_dev_name: Name to uniquely identify the consumer device. - * @consumer_channel: Unique name used to idenitify the channel on the + * @consumer_channel: Unique name used to identify the channel on the * consumer side. */ struct iio_map { -- cgit v1.2.3 From fb1c4bcd721fcc30d6e43f60a244483dc0d07056 Mon Sep 17 00:00:00 2001 From: Peter Meerwald Date: Fri, 15 Jun 2012 19:25:28 +0200 Subject: iio: iio/events.h typos Signed-off-by: Peter Meerwald Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- include/linux/iio/events.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux/iio') diff --git a/include/linux/iio/events.h b/include/linux/iio/events.h index b5acbf93c5da..13ce220c7003 100644 --- a/include/linux/iio/events.h +++ b/include/linux/iio/events.h @@ -46,7 +46,7 @@ enum iio_event_direction { * @diff: Whether the event is for an differential channel or not. * @modifier: Modifier for the channel. Should be one of enum iio_modifier. * @direction: Direction of the event. One of enum iio_event_direction. - * @type: Type of the event. Should be one enum iio_event_type. + * @type: Type of the event. Should be one of enum iio_event_type. * @chan: Channel number for non-differential channels. * @chan1: First channel number for differential channels. * @chan2: Second channel number for differential channels. @@ -69,7 +69,7 @@ enum iio_event_direction { * @chan_type: Type of the channel. Should be one of enum iio_chan_type. * @number: Channel number. * @modifier: Modifier for the channel. Should be one of enum iio_modifier. - * @type: Type of the event. Should be one enum iio_event_type. + * @type: Type of the event. Should be one of enum iio_event_type. * @direction: Direction of the event. One of enum iio_event_direction. */ @@ -81,7 +81,7 @@ enum iio_event_direction { * IIO_UNMOD_EVENT_CODE() - create event identifier for unmodified channels * @chan_type: Type of the channel. Should be one of enum iio_chan_type. * @number: Channel number. - * @type: Type of the event. Should be one enum iio_event_type. + * @type: Type of the event. Should be one of enum iio_event_type. * @direction: Direction of the event. One of enum iio_event_direction. */ -- cgit v1.2.3 From 23f2d735a932c7833d2d00da5e3ecdf4a6836210 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 18 Jun 2012 18:33:48 +0200 Subject: iio: Add helper function for initializing triggered buffers Add a helper function for executing the common tasks which are usually involved in setting up a simple software ringbuffer. It will allocate the buffer, allocate the pollfunc and register the buffer. Signed-off-by: Lars-Peter Clausen Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- include/linux/iio/triggered_buffer.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) create mode 100644 include/linux/iio/triggered_buffer.h (limited to 'include/linux/iio') diff --git a/include/linux/iio/triggered_buffer.h b/include/linux/iio/triggered_buffer.h new file mode 100644 index 000000000000..c378ebec605e --- /dev/null +++ b/include/linux/iio/triggered_buffer.h @@ -0,0 +1,15 @@ +#ifndef _LINUX_IIO_TRIGGERED_BUFFER_H_ +#define _LINUX_IIO_TRIGGERED_BUFFER_H_ + +#include + +struct iio_dev; +struct iio_buffer_setup_ops; + +int iio_triggered_buffer_setup(struct iio_dev *indio_dev, + irqreturn_t (*pollfunc_bh)(int irq, void *p), + irqreturn_t (*pollfunc_th)(int irq, void *p), + const struct iio_buffer_setup_ops *setup_ops); +void iio_triggered_buffer_cleanup(struct iio_dev *indio_dev); + +#endif -- cgit v1.2.3 From 9cc113bc84e683435c110268712d25aea05b8198 Mon Sep 17 00:00:00 2001 From: Peter Meerwald Date: Mon, 18 Jun 2012 20:33:01 +0200 Subject: iio: typo in iio_chan_spec.ext_info comment Signed-off-by: Peter Meerwald Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- include/linux/iio/iio.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux/iio') diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index ae0cad908182..2afbb6f01afc 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -214,7 +214,7 @@ ssize_t iio_enum_write(struct iio_dev *indio_dev, * @event_mask: What events can this channel produce. * @ext_info: Array of extended info attributes for this channel. * The array is NULL terminated, the last element should - * have it's name field set to NULL. + * have its name field set to NULL. * @extend_name: Allows labeling of channel attributes with an * informative name. Note this has no effect codes etc, * unlike modifiers. -- cgit v1.2.3 From b90406f1e5f4cb673e331ce6d435f4bdbf2136a2 Mon Sep 17 00:00:00 2001 From: Peter Meerwald Date: Mon, 18 Jun 2012 20:33:02 +0200 Subject: iio: correct documentation for IIO_CONST_ATTR_SAMP_FREQ_AVAIL, match name of #define Signed-off-by: Peter Meerwald Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- include/linux/iio/sysfs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux/iio') diff --git a/include/linux/iio/sysfs.h b/include/linux/iio/sysfs.h index bfedb73b850e..b7a934b9431b 100644 --- a/include/linux/iio/sysfs.h +++ b/include/linux/iio/sysfs.h @@ -97,7 +97,7 @@ struct iio_const_attr { #define IIO_DEV_ATTR_SAMP_FREQ_AVAIL(_show) \ IIO_DEVICE_ATTR(sampling_frequency_available, S_IRUGO, _show, NULL, 0) /** - * IIO_CONST_ATTR_AVAIL_SAMP_FREQ - list available sampling frequencies + * IIO_CONST_ATTR_SAMP_FREQ_AVAIL - list available sampling frequencies * @_string: frequency string for the attribute * * Constant version -- cgit v1.2.3 From 19ea4752fc1f45c778ae66443c1023aced14ba05 Mon Sep 17 00:00:00 2001 From: Peter Meerwald Date: Mon, 18 Jun 2012 20:33:03 +0200 Subject: iio: remove extra ; after function definition Signed-off-by: Peter Meerwald Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- include/linux/iio/buffer.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux/iio') diff --git a/include/linux/iio/buffer.h b/include/linux/iio/buffer.h index fb0fe46fd659..ad4fb1af0f7d 100644 --- a/include/linux/iio/buffer.h +++ b/include/linux/iio/buffer.h @@ -184,7 +184,7 @@ static inline int iio_buffer_register(struct iio_dev *indio_dev, } static inline void iio_buffer_unregister(struct iio_dev *indio_dev) -{}; +{} #endif /* CONFIG_IIO_BUFFER */ -- cgit v1.2.3 From 314be14bb89369b2164125b0ec3b24d85b407b62 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Tue, 1 May 2012 21:04:24 +0100 Subject: iio: Rename _st_ functions to loose the bit that meant the staging version. These were originally introduced when the plan was to have parallel IIO cores in and out of staging with a slow move between them. Now we have reached the point where the whole core has moved, they need clearing up! Signed-off-by: Jonathan Cameron --- include/linux/iio/consumer.h | 34 +++++++++++++++++----------------- 1 file changed, 17 insertions(+), 17 deletions(-) (limited to 'include/linux/iio') diff --git a/include/linux/iio/consumer.h b/include/linux/iio/consumer.h index 1a15e560a5a1..e2657e6d4d26 100644 --- a/include/linux/iio/consumer.h +++ b/include/linux/iio/consumer.h @@ -33,17 +33,17 @@ struct iio_channel { * side. This typically describes the channels use within * the consumer. E.g. 'battery_voltage' */ -struct iio_channel *iio_st_channel_get(const char *name, - const char *consumer_channel); +struct iio_channel *iio_channel_get(const char *name, + const char *consumer_channel); /** - * iio_st_channel_release() - release channels obtained via iio_st_channel_get + * iio_channel_release() - release channels obtained via iio_channel_get * @chan: The channel to be released. */ -void iio_st_channel_release(struct iio_channel *chan); +void iio_channel_release(struct iio_channel *chan); /** - * iio_st_channel_get_all() - get all channels associated with a client + * iio_channel_get_all() - get all channels associated with a client * @name: name of consumer device. * * Returns an array of iio_channel structures terminated with one with @@ -51,37 +51,37 @@ void iio_st_channel_release(struct iio_channel *chan); * This function is used by fairly generic consumers to get all the * channels registered as having this consumer. */ -struct iio_channel *iio_st_channel_get_all(const char *name); +struct iio_channel *iio_channel_get_all(const char *name); /** - * iio_st_channel_release_all() - reverse iio_st_get_all + * iio_channel_release_all() - reverse iio_channel_get_all * @chan: Array of channels to be released. */ -void iio_st_channel_release_all(struct iio_channel *chan); +void iio_channel_release_all(struct iio_channel *chan); /** - * iio_st_read_channel_raw() - read from a given channel + * iio_read_channel_raw() - read from a given channel * @channel: The channel being queried. * @val: Value read back. * * Note raw reads from iio channels are in adc counts and hence * scale will need to be applied if standard units required. */ -int iio_st_read_channel_raw(struct iio_channel *chan, - int *val); +int iio_read_channel_raw(struct iio_channel *chan, + int *val); /** - * iio_st_get_channel_type() - get the type of a channel + * iio_get_channel_type() - get the type of a channel * @channel: The channel being queried. * @type: The type of the channel. * * returns the enum iio_chan_type of the channel */ -int iio_st_get_channel_type(struct iio_channel *channel, - enum iio_chan_type *type); +int iio_get_channel_type(struct iio_channel *channel, + enum iio_chan_type *type); /** - * iio_st_read_channel_scale() - read the scale value for a channel + * iio_read_channel_scale() - read the scale value for a channel * @channel: The channel being queried. * @val: First part of value read back. * @val2: Second part of value read back. @@ -90,7 +90,7 @@ int iio_st_get_channel_type(struct iio_channel *channel, * as IIO_VAL_INT_PLUS_MICRO telling us we have a value of val * + val2/1e6 */ -int iio_st_read_channel_scale(struct iio_channel *chan, int *val, - int *val2); +int iio_read_channel_scale(struct iio_channel *chan, int *val, + int *val2); #endif -- cgit v1.2.3 From 8f5879b20be7f918cdc4b3d831cfd8f3dc02c74c Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sat, 5 May 2012 10:39:22 +0100 Subject: IIO: Add a modifier for sqrt(x^2+y^2) There will probably be a number of such modifiers eventually but this one is used in the adis16204 accelerometer driver. Signed-off-by: Jonathan Cameron --- include/linux/iio/types.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/iio') diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h index d086736a9033..210559ddf8a3 100644 --- a/include/linux/iio/types.h +++ b/include/linux/iio/types.h @@ -44,6 +44,7 @@ enum iio_modifier { IIO_MOD_X_OR_Y_OR_Z, IIO_MOD_LIGHT_BOTH, IIO_MOD_LIGHT_IR, + IIO_MOD_ROOT_SUM_SQUARED_X_Y, }; #define IIO_VAL_INT 1 -- cgit v1.2.3 From cf82cb8128496955a38fa62e1819ceb1d596e2eb Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sat, 5 May 2012 10:56:41 +0100 Subject: IIO: Add a modifier for x^2+y^2+z^2 There will probably be a number of such modifiers eventually but this one is used in the adis16240 accelerometer driver. Signed-off-by: Jonathan Cameron --- include/linux/iio/types.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/iio') diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h index 210559ddf8a3..e25040173346 100644 --- a/include/linux/iio/types.h +++ b/include/linux/iio/types.h @@ -45,6 +45,7 @@ enum iio_modifier { IIO_MOD_LIGHT_BOTH, IIO_MOD_LIGHT_IR, IIO_MOD_ROOT_SUM_SQUARED_X_Y, + IIO_MOD_SUM_SQUARED_X_Y_Z, }; #define IIO_VAL_INT 1 -- cgit v1.2.3 From 3bdff937827da04b487f0a0ac6e1f3a9a1296878 Mon Sep 17 00:00:00 2001 From: Peter Meerwald Date: Sun, 1 Jul 2012 00:47:43 +0200 Subject: iio: cleanup buffer.h comments Signed-off-by: Peter Meerwald Signed-off-by: Jonathan Cameron --- include/linux/iio/buffer.h | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) (limited to 'include/linux/iio') diff --git a/include/linux/iio/buffer.h b/include/linux/iio/buffer.h index ad4fb1af0f7d..2a2b6b4d8d05 100644 --- a/include/linux/iio/buffer.h +++ b/include/linux/iio/buffer.h @@ -85,7 +85,7 @@ struct iio_buffer { /** * iio_buffer_init() - Initialize the buffer structure - * @buffer: buffer to be initialized + * @buffer: buffer to be initialized **/ void iio_buffer_init(struct iio_buffer *buffer); @@ -107,8 +107,9 @@ int iio_scan_mask_query(struct iio_dev *indio_dev, /** * iio_scan_mask_set() - set particular bit in the scan mask - * @buffer: the buffer whose scan mask we are interested in - * @bit: the bit to be set. + * @indio_dev IIO device structure + * @buffer: the buffer whose scan mask we are interested in + * @bit: the bit to be set. **/ int iio_scan_mask_set(struct iio_dev *indio_dev, struct iio_buffer *buffer, int bit); @@ -116,8 +117,8 @@ int iio_scan_mask_set(struct iio_dev *indio_dev, /** * iio_push_to_buffer() - push to a registered buffer. * @buffer: IIO buffer structure for device - * @scan: Full scan. - * @timestamp: + * @data: the data to push to the buffer + * @timestamp: timestamp to associate with the data */ int iio_push_to_buffer(struct iio_buffer *buffer, unsigned char *data, s64 timestamp); @@ -126,7 +127,9 @@ int iio_update_demux(struct iio_dev *indio_dev); /** * iio_buffer_register() - register the buffer with IIO core - * @indio_dev: device with the buffer to be registered + * @indio_dev: device with the buffer to be registered + * @channels: the channel descriptions used to construct buffer + * @num_channels: the number of channels **/ int iio_buffer_register(struct iio_dev *indio_dev, const struct iio_chan_spec *channels, @@ -134,7 +137,7 @@ int iio_buffer_register(struct iio_dev *indio_dev, /** * iio_buffer_unregister() - unregister the buffer from IIO core - * @indio_dev: the device with the buffer to be unregistered + * @indio_dev: the device with the buffer to be unregistered **/ void iio_buffer_unregister(struct iio_dev *indio_dev); -- cgit v1.2.3 From 939546d1a9f47ed169554c711e1e05965b84ffe1 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 9 Jul 2012 10:00:00 +0100 Subject: iio: Add callback to check whether a scan mask is valid This is useful for cases where the number of valid scan masks grows exponentially, but it is rather easy to check whether a mask is valid or not programmatically. An example of such a case is a device with multiple ADCs where each ADC has a upstream MUX, which allows to select from a number of physical channels. +-------+ +-------+ | | | | --- Channel 1 | ADC 1 |---| MUX 1 | --- ... | | | | --- Channel M +-------+ +-------+ . . . . . . . . . +-------+ +-------+ | | | | --- Channel M * N + 1 | ADC N |---| MUX N | --- ... | | | | --- Channel M * N + M +-------+ +-------+ The number of necessary scan masks for this case is (M+1)**N - 1, on the other hand it is easy to check whether subsets for each ADC of the scanmask have only one bit set. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- include/linux/iio/iio.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux/iio') diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index 2afbb6f01afc..be82936c4089 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -363,12 +363,16 @@ struct iio_info { * @predisable: [DRIVER] function to run prior to marking buffer * disabled * @postdisable: [DRIVER] function to run after marking buffer disabled + * @validate_scan_mask: [DRIVER] function callback to check whether a given + * scan mask is valid for the device. */ struct iio_buffer_setup_ops { int (*preenable)(struct iio_dev *); int (*postenable)(struct iio_dev *); int (*predisable)(struct iio_dev *); int (*postdisable)(struct iio_dev *); + bool (*validate_scan_mask)(struct iio_dev *indio_dev, + const unsigned long *scan_mask); }; /** -- cgit v1.2.3 From 81636632057cc1bece2531220dd5803036f95ea9 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 9 Jul 2012 10:00:00 +0100 Subject: iio: Introduce iio_validate_scan_mask_onehot Add a helper function for validating a scan mask for devices where exactly one channel must be selected during sampling. This is a common case among devices which have scan mask restrictions so it makes sense to provide this function in the core. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- include/linux/iio/buffer.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux/iio') diff --git a/include/linux/iio/buffer.h b/include/linux/iio/buffer.h index 2a2b6b4d8d05..8ba516fc2ec6 100644 --- a/include/linux/iio/buffer.h +++ b/include/linux/iio/buffer.h @@ -177,6 +177,9 @@ ssize_t iio_buffer_show_enable(struct device *dev, int iio_sw_buffer_preenable(struct iio_dev *indio_dev); +bool iio_validate_scan_mask_onehot(struct iio_dev *indio_dev, + const unsigned long *mask); + #else /* CONFIG_IIO_BUFFER */ static inline int iio_buffer_register(struct iio_dev *indio_dev, -- cgit v1.2.3 From 21cd1fab058671313f7c178b640999fcd0d8de21 Mon Sep 17 00:00:00 2001 From: Jon Brenner Date: Wed, 16 May 2012 10:46:42 -0500 Subject: IIO channel type and modifiers for CCT and RGBC data Add iio channel type and modifiers for Correlated Color Temperature (CCT) and RGBC (red/green/blue/clear) data. Add CCT and RGBC descriptions to documentation. Changes: Revised/condensed RGBC descriptions. Merge and trivial fix done by Jonathan Cameron. Signed-off-by: Jon Brenner Signed-off-by: Jonathan Cameron --- include/linux/iio/types.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux/iio') diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h index e25040173346..44e397705d7f 100644 --- a/include/linux/iio/types.h +++ b/include/linux/iio/types.h @@ -27,6 +27,7 @@ enum iio_chan_type { IIO_TIMESTAMP, IIO_CAPACITANCE, IIO_ALTVOLTAGE, + IIO_CCT, }; enum iio_modifier { @@ -46,6 +47,10 @@ enum iio_modifier { IIO_MOD_LIGHT_IR, IIO_MOD_ROOT_SUM_SQUARED_X_Y, IIO_MOD_SUM_SQUARED_X_Y_Z, + IIO_MOD_LIGHT_CLEAR, + IIO_MOD_LIGHT_RED, + IIO_MOD_LIGHT_GREEN, + IIO_MOD_LIGHT_BLUE, }; #define IIO_VAL_INT 1 -- cgit v1.2.3