From 823f18f8b860526fc099c222619a126d57d2ad8c Mon Sep 17 00:00:00 2001 From: Matti Vaittinen Date: Wed, 29 Aug 2018 15:36:10 +0300 Subject: regulator: bd71837: Disable voltage monitoring for LDO3/4 There is a HW quirk in BD71837. The shutdown sequence timings for bucks/LDOs which are enabled via register interface are changed. At PMIC poweroff the voltage for BUCK6/7 is cut immediately at the beginning of shut-down sequence. This causes LDO5/6 voltage monitoring to detect under voltage and force PMIC to emergency state instead of poweroff. Disable voltage monitoring for LDO5 and LDO6 at probe to avoid this. Signed-off-by: Matti Vaittinen Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- include/linux/mfd/rohm-bd718x7.h | 33 ++++++++++++++++++++++++++++++--- 1 file changed, 30 insertions(+), 3 deletions(-) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/rohm-bd718x7.h b/include/linux/mfd/rohm-bd718x7.h index a528747f8aed..e8338e5dc10b 100644 --- a/include/linux/mfd/rohm-bd718x7.h +++ b/include/linux/mfd/rohm-bd718x7.h @@ -78,9 +78,9 @@ enum { BD71837_REG_TRANS_COND0 = 0x1F, BD71837_REG_TRANS_COND1 = 0x20, BD71837_REG_VRFAULTEN = 0x21, - BD71837_REG_MVRFLTMASK0 = 0x22, - BD71837_REG_MVRFLTMASK1 = 0x23, - BD71837_REG_MVRFLTMASK2 = 0x24, + BD718XX_REG_MVRFLTMASK0 = 0x22, + BD718XX_REG_MVRFLTMASK1 = 0x23, + BD718XX_REG_MVRFLTMASK2 = 0x24, BD71837_REG_RCVCFG = 0x25, BD71837_REG_RCVNUM = 0x26, BD71837_REG_PWRONCONFIG0 = 0x27, @@ -159,6 +159,33 @@ enum { #define BUCK8_MASK 0x3F #define BUCK8_DEFAULT 0x1E +/* BD718XX Voltage monitoring masks */ +#define BD718XX_BUCK1_VRMON80 0x1 +#define BD718XX_BUCK1_VRMON130 0x2 +#define BD718XX_BUCK2_VRMON80 0x4 +#define BD718XX_BUCK2_VRMON130 0x8 +#define BD718XX_1ST_NODVS_BUCK_VRMON80 0x1 +#define BD718XX_1ST_NODVS_BUCK_VRMON130 0x2 +#define BD718XX_2ND_NODVS_BUCK_VRMON80 0x4 +#define BD718XX_2ND_NODVS_BUCK_VRMON130 0x8 +#define BD718XX_3RD_NODVS_BUCK_VRMON80 0x10 +#define BD718XX_3RD_NODVS_BUCK_VRMON130 0x20 +#define BD718XX_4TH_NODVS_BUCK_VRMON80 0x40 +#define BD718XX_4TH_NODVS_BUCK_VRMON130 0x80 +#define BD718XX_LDO1_VRMON80 0x1 +#define BD718XX_LDO2_VRMON80 0x2 +#define BD718XX_LDO3_VRMON80 0x4 +#define BD718XX_LDO4_VRMON80 0x8 +#define BD718XX_LDO5_VRMON80 0x10 +#define BD718XX_LDO6_VRMON80 0x20 + +/* BD71837 specific voltage monitoring masks */ +#define BD71837_BUCK3_VRMON80 0x10 +#define BD71837_BUCK3_VRMON130 0x20 +#define BD71837_BUCK4_VRMON80 0x40 +#define BD71837_BUCK4_VRMON130 0x80 +#define BD71837_LDO7_VRMON80 0x40 + /* BD71837_REG_IRQ bits */ #define IRQ_SWRST 0x40 #define IRQ_PWRON_S 0x20 -- cgit v1.2.3 From ef394f3fbecbe61d69450ad8cf0fa8f713c8ce8f Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Fri, 31 Aug 2018 14:34:02 +0200 Subject: regulator: da9063: fix DT probing with constraints Commit 1c892e38ce59 ("regulator: da9063: Handle less LDOs on DA9063L") reordered the da9063_regulator_info[] array, but not the DA9063_ID_* regulator ids and not the da9063_matches[] array, because ids are used as indices in the array initializer. This mismatch between regulator id and da9063_regulator_info[] array index causes the driver probe to fail because constraints from DT are not applied to the correct regulator: da9063 0-0058: Device detected (chip-ID: 0x61, var-ID: 0x50) DA9063_BMEM: Bringing 900000uV into 3300000-3300000uV DA9063_LDO9: Bringing 3300000uV into 2500000-2500000uV DA9063_LDO1: Bringing 900000uV into 3300000-3300000uV DA9063_LDO1: failed to apply 3300000-3300000uV constraint(-22) This patch reorders the DA9063_ID_* as apparently intended, and with them the entries in the da90630_matches[] array. Fixes: 1c892e38ce59 ("regulator: da9063: Handle less LDOs on DA9063L") Signed-off-by: Philipp Zabel Reviewed-by: Geert Uytterhoeven Reviewed-by: Marek Vasut Signed-off-by: Mark Brown --- include/linux/mfd/da9063/pdata.h | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/da9063/pdata.h b/include/linux/mfd/da9063/pdata.h index 8a125701ef7b..50bed4f89c1a 100644 --- a/include/linux/mfd/da9063/pdata.h +++ b/include/linux/mfd/da9063/pdata.h @@ -21,7 +21,7 @@ /* * Regulator configuration */ -/* DA9063 regulator IDs */ +/* DA9063 and DA9063L regulator IDs */ enum { /* BUCKs */ DA9063_ID_BCORE1, @@ -37,18 +37,20 @@ enum { DA9063_ID_BMEM_BIO_MERGED, /* When two BUCKs are merged, they cannot be reused separately */ - /* LDOs */ + /* LDOs on both DA9063 and DA9063L */ + DA9063_ID_LDO3, + DA9063_ID_LDO7, + DA9063_ID_LDO8, + DA9063_ID_LDO9, + DA9063_ID_LDO11, + + /* DA9063-only LDOs */ DA9063_ID_LDO1, DA9063_ID_LDO2, - DA9063_ID_LDO3, DA9063_ID_LDO4, DA9063_ID_LDO5, DA9063_ID_LDO6, - DA9063_ID_LDO7, - DA9063_ID_LDO8, - DA9063_ID_LDO9, DA9063_ID_LDO10, - DA9063_ID_LDO11, }; /* Regulators platform data */ -- cgit v1.2.3 From 78d8f8f1a1800cf6068ffcac7a14cda19ae693d8 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Fri, 5 Oct 2018 11:41:13 -0700 Subject: mfd: cros: add "base attached" MKBP switch definition This adds a "base attached" switch definition to the MKBP protocol that is used by Whiskers driver to properly determine device state (clamshell vs tablet mode). Signed-off-by: Dmitry Torokhov Acked-by: Lee Jones Signed-off-by: Jiri Kosina --- include/linux/mfd/cros_ec_commands.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h index 6e1ab9bead28..7690f0793965 100644 --- a/include/linux/mfd/cros_ec_commands.h +++ b/include/linux/mfd/cros_ec_commands.h @@ -2132,6 +2132,7 @@ struct ec_response_get_next_event_v1 { /* Switches */ #define EC_MKBP_LID_OPEN 0 #define EC_MKBP_TABLET_MODE 1 +#define EC_MKBP_BASE_ATTACHED 2 /*****************************************************************************/ /* Temperature sensor commands */ -- cgit v1.2.3