From 384b2cbd56a02efb16358ed7c0c039e4afca5ed0 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Sun, 24 Aug 2014 19:58:48 -0700 Subject: mmc: tmio: care about DMA tx/rx addr offset Basically, SD_BUF0 Tx/Rx addresses are same in normal TMIO controller, but, it is different on Renesas R-Car SDHI controller if it uses DMAC (Rx address needs to add 0x2000 to Tx address) This patch adds new .dma_rx_offset and cares it Tested-by: Nguyen Xuan Nui Tested-by: Hiep Cao Minh Acked-by: Laurent Pinchart Acked-by: Ben Dooks Signed-off-by: Kuninori Morimoto Signed-off-by: Ulf Hansson --- include/linux/mfd/tmio.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index 8f6f2e91e7ae..777e29b1ad0f 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -96,6 +96,7 @@ struct tmio_mmc_dma { int slave_id_tx; int slave_id_rx; int alignment_shift; + dma_addr_t dma_rx_offset; bool (*filter)(struct dma_chan *chan, void *arg); }; -- cgit v1.2.3 From b8d11962c2d83c984d5afd091e5b725ad2fd5607 Mon Sep 17 00:00:00 2001 From: Shinobu Uehara Date: Sun, 24 Aug 2014 20:00:25 -0700 Subject: mmc: tmio: control multiple block transfer mode Renesas SDHI has "Multiple Block Transfer Mode" settings on SD_CMD register which controls CMD12 automatically. This patch cares it, because CMD12 is not needed when CMD53 (= SD_IO_RW_EXTENDED) [Kuninori Morimoto: tidyuped for upstreaming enabled this flags for all SH-Mobile/R-Car] Tested-by: Nguyen Xuan Nui Tested-by: Hiep Cao Minh Signed-off-by: Shinobu Uehara Signed-off-by: Kuninori Morimoto Signed-off-by: Ulf Hansson --- include/linux/mfd/tmio.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index 777e29b1ad0f..7432d95b08e2 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -83,6 +83,12 @@ */ #define TMIO_MMC_HAVE_HIGH_REG (1 << 6) +/* + * Some controllers have CMD12 automatically + * issue/non-issue register + */ +#define TMIO_MMC_HAVE_CMD12_CTRL (1 << 7) + int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base); int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base); void tmio_core_mmc_pwr(void __iomem *cnf, int shift, int state); -- cgit v1.2.3 From 6b98757e53cb0e93b02db4067c14afcb32c90615 Mon Sep 17 00:00:00 2001 From: Shinobu Uehara Date: Sun, 24 Aug 2014 20:00:52 -0700 Subject: mmc: tmio: add TMIO_MMC_SDIO_STATUS_QUIRK Renesas R-Car SDHI should set reserved bits on CTL_SDIO_STATUS register when writing. This patch adds new TMIO_MMC_SDIO_STATUS_QUIRK flags for this purpose [Kuninori Morimoto: tidyuped for upstreaming enabled this flags for all SH-Mobile/R-Car] Tested-by: Nguyen Xuan Nui Tested-by: Hiep Cao Minh Signed-off-by: Shinobu Uehara Signed-off-by: Kuninori Morimoto Signed-off-by: Ulf Hansson --- include/linux/mfd/tmio.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index 7432d95b08e2..a7493ae01b58 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -89,6 +89,11 @@ */ #define TMIO_MMC_HAVE_CMD12_CTRL (1 << 7) +/* + * Some controllers needs to set 1 on SDIO status reserved bits + */ +#define TMIO_MMC_SDIO_STATUS_QUIRK (1 << 8) + int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base); int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base); void tmio_core_mmc_pwr(void __iomem *cnf, int shift, int state); -- cgit v1.2.3 From e85dd04ea8c8d32ba8eae278959d28df34338e9d Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Sun, 24 Aug 2014 20:01:54 -0700 Subject: mmc: tmio: remove Renesas specific #ifdef This patch adds new TMIO_MMC_HAVE_CTL_DMA_REG flag, and remove Renesas specific #ifdef from tmio driver Tested-by: Nguyen Xuan Nui Tested-by: Hiep Cao Minh Signed-off-by: Kuninori Morimoto Signed-off-by: Ulf Hansson --- include/linux/mfd/tmio.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index a7493ae01b58..adcb0cdb2fdb 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -94,6 +94,11 @@ */ #define TMIO_MMC_SDIO_STATUS_QUIRK (1 << 8) +/* + * Some controllers have DMA enable/disable register + */ +#define TMIO_MMC_HAVE_CTL_DMA_REG (1 << 9) + int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base); int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base); void tmio_core_mmc_pwr(void __iomem *cnf, int shift, int state); -- cgit v1.2.3 From da29fe2bf573f0ae56fdc2e790387cb73fc8c6f8 Mon Sep 17 00:00:00 2001 From: Shinobu Uehara Date: Sun, 24 Aug 2014 20:03:00 -0700 Subject: mmc: tmio: add actual clock support as option Some controller is supporting actual clock on SD_CLK_CTRL :: DIV[7:0]. Renesas SH-Mobile SDHI doesn't support, but, Renesas R-Car SDHI supports it. This patch adds new TMIO_MMC_CLK_ACTUAL flag for it. [Kuninori Morimoto: tidyuped for upstreaming] Tested-by: Nguyen Xuan Nui Tested-by: Hiep Cao Minh Signed-off-by: Shinobu Uehara Signed-off-by: Kuninori Morimoto Signed-off-by: Ulf Hansson --- include/linux/mfd/tmio.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index adcb0cdb2fdb..90436d523e5e 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -99,6 +99,11 @@ */ #define TMIO_MMC_HAVE_CTL_DMA_REG (1 << 9) +/* + * Some controllers allows to set SDx actual clock + */ +#define TMIO_MMC_CLK_ACTUAL (1 << 10) + int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base); int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base); void tmio_core_mmc_pwr(void __iomem *cnf, int shift, int state); -- cgit v1.2.3 From bbf0208d39121bd8873b032459cb2b5f35e14593 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 8 Sep 2014 23:45:25 -0700 Subject: mmc: use .multi_io_quirk on tmio_mmc Now, tmio_mmc can use .multi_io_quirk callback instead of MMC_CAP2_NO_MULTI_READ flags. let's use it. Signed-off-by: Kuninori Morimoto Acked-by: Lee Jones Signed-off-by: Ulf Hansson --- include/linux/mfd/tmio.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index 90436d523e5e..57388171610d 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -5,6 +5,7 @@ #include #include #include +#include #include #include @@ -142,6 +143,8 @@ struct tmio_mmc_data { /* clock management callbacks */ int (*clk_enable)(struct platform_device *pdev, unsigned int *f); void (*clk_disable)(struct platform_device *pdev); + int (*multi_io_quirk)(struct mmc_card *card, + unsigned int direction, int blk_size); }; /* -- cgit v1.2.3