From 386cb76681ca6248878c7b76d3d5aa0e8b8a07bb Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 22 Mar 2019 07:49:30 -0700 Subject: bus: ti-sysc: Handle missed no-idle property in addition to no-idle-on-init We have ti,no-idle in use in addition to ti,no-idle-on-init but we're missing handling for it in the ti-sysc interconnect target module driver. Let's also group the idle defines together and update the binding documentation for it. Cc: devicetree@vger.kernel.org Reviewed-by: Rob Herring Signed-off-by: Tony Lindgren --- include/linux/platform_data/ti-sysc.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h index 1ea3aab972b4..fa97b8c5d26d 100644 --- a/include/linux/platform_data/ti-sysc.h +++ b/include/linux/platform_data/ti-sysc.h @@ -46,8 +46,9 @@ struct sysc_regbits { s8 emufree_shift; }; -#define SYSC_QUIRK_LEGACY_IDLE BIT(8) -#define SYSC_QUIRK_RESET_STATUS BIT(7) +#define SYSC_QUIRK_LEGACY_IDLE BIT(9) +#define SYSC_QUIRK_RESET_STATUS BIT(8) +#define SYSC_QUIRK_NO_IDLE BIT(7) #define SYSC_QUIRK_NO_IDLE_ON_INIT BIT(6) #define SYSC_QUIRK_NO_RESET_ON_INIT BIT(5) #define SYSC_QUIRK_OPT_CLKS_NEEDED BIT(4) -- cgit v1.2.3 From a54275f4ab204137c9995c686c7f1cd2682cc0a4 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 21 Mar 2019 11:00:21 -0700 Subject: bus: ti-sysc: Add quirk handling for external optional functional clock We cannot access mcpdm registers at all unless there is an optional pdmclk configured. As this is currently only needed for mcpdm, let's check for mcpdm in sysc_get_clocks(). If it turns out to be needed for other modules too, we can add more flags to the quirks table for this. Signed-off-by: Tony Lindgren --- include/linux/platform_data/ti-sysc.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h index fa97b8c5d26d..1384e5cdd310 100644 --- a/include/linux/platform_data/ti-sysc.h +++ b/include/linux/platform_data/ti-sysc.h @@ -46,6 +46,7 @@ struct sysc_regbits { s8 emufree_shift; }; +#define SYSC_QUIRK_EXT_OPT_CLOCK BIT(10) #define SYSC_QUIRK_LEGACY_IDLE BIT(9) #define SYSC_QUIRK_RESET_STATUS BIT(8) #define SYSC_QUIRK_NO_IDLE BIT(7) -- cgit v1.2.3 From b4a9a7a38917e9f947b5e69f7e8d4138d4c82845 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 21 Mar 2019 13:27:08 -0700 Subject: bus: ti-sysc: Handle swsup idle mode quirks In preparation of dropping interconnect target module platform data in favor of devicetree based data, we must pass swsup idle quirks to the platform data functions. For now, let's only tag the UART modules with the SWSUP_SIDLE_ACT quirk. The other modules will get tagged with swsup quirks as we drop the platform data and test the changes. Signed-off-by: Tony Lindgren --- include/linux/platform_data/ti-sysc.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h index 1384e5cdd310..9256c0305968 100644 --- a/include/linux/platform_data/ti-sysc.h +++ b/include/linux/platform_data/ti-sysc.h @@ -46,6 +46,9 @@ struct sysc_regbits { s8 emufree_shift; }; +#define SYSC_QUIRK_SWSUP_MSTANDBY BIT(13) +#define SYSC_QUIRK_SWSUP_SIDLE_ACT BIT(12) +#define SYSC_QUIRK_SWSUP_SIDLE BIT(11) #define SYSC_QUIRK_EXT_OPT_CLOCK BIT(10) #define SYSC_QUIRK_LEGACY_IDLE BIT(9) #define SYSC_QUIRK_RESET_STATUS BIT(8) -- cgit v1.2.3 From e90a619fb7e1acb5e18f1ab618c6d10b08f0fc70 Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Thu, 7 Feb 2019 15:28:24 +0100 Subject: mtd: nand: omap: Fix comment in platform data using wrong Kconfig symbol The symbol that is being used in the #if/#endif block is not the one which is mentioned at the bottom. Fixes: 93af53b8633c ("nand: omap2: Remove horrible ifdefs to fix module probe") Signed-off-by: Miquel Raynal --- include/linux/platform_data/elm.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/elm.h b/include/linux/platform_data/elm.h index b8686c00f15f..fef4b081b736 100644 --- a/include/linux/platform_data/elm.h +++ b/include/linux/platform_data/elm.h @@ -60,6 +60,6 @@ static inline int elm_config(struct device *dev, enum bch_ecc bch_type, { return -ENOSYS; } -#endif /* CONFIG_MTD_NAND_ECC_BCH */ +#endif /* CONFIG_MTD_NAND_OMAP_BCH */ #endif /* __ELM_H */ -- cgit v1.2.3 From 44c22a2d12a5c04da56e746819a5d2cc4cf4a5d7 Mon Sep 17 00:00:00 2001 From: Keerthy Date: Wed, 3 Apr 2019 10:27:40 +0530 Subject: ARM: OMAP2+: pm33xx: Add support for rtc+ddr in self refresh mode Add support for rtc+ddr in self refresh mode. Add addtional pm hooks for save/restore and rtc suspend/resume. Signed-off-by: Keerthy Signed-off-by: Tony Lindgren --- include/linux/platform_data/pm33xx.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/pm33xx.h b/include/linux/platform_data/pm33xx.h index fbf5ed73c7cc..dd5971937a64 100644 --- a/include/linux/platform_data/pm33xx.h +++ b/include/linux/platform_data/pm33xx.h @@ -51,6 +51,11 @@ struct am33xx_pm_platform_data { unsigned long args); struct am33xx_pm_sram_addr *(*get_sram_addrs)(void); void __iomem *(*get_rtc_base_addr)(void); + void (*save_context)(void); + void (*restore_context)(void); + void (*prepare_rtc_suspend)(void); + void (*prepare_rtc_resume)(void); + int (*check_off_mode_enable)(void); }; struct am33xx_pm_sram_data { -- cgit v1.2.3 From e6818d29ea1591b3e37d9cf635dc9dbca1a398ae Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 8 Apr 2019 12:46:53 -0700 Subject: gpio: gpio-omap: configure edge detection for level IRQs for idle wakeup The GPIO block can enter idle independently of the CPU power management calls via smart-idle. When the GPIO block enters idle, level detection stops working due to clocks being shut off, and an alternative form of edge detection is used. However, this needs the edge detection registers set to mark the appropriate edges. Arrange to configure the edge detection enables along with the level detection to ensure that any transition to active interrupt state that occurs while the block is idle is detected as a wake-up event. Since we enable the edge detection when configuring the IRQ, both omap2_gpio_enable_level_quirk() nor omap2_gpio_disable_level_quirk() become redundant, which also means OMAP_GPIO_QUIRK_IDLE_REMOVE_TRIGGER can be removed. This can be now done without regressions as patch "gpio: gpio-omap: fix level interrupt idling" allows level interrupts to idle on omap4 without a workaround. Cc: Aaro Koskinen Cc: Grygorii Strashko Cc: Keerthy Cc: Peter Ujfalusi Cc: Tero Kristo Signed-off-by: Russell King [tony@atomide.com: update description for the fix dependency] Signed-off-by: Tony Lindgren Signed-off-by: Linus Walleij --- include/linux/platform_data/gpio-omap.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/gpio-omap.h b/include/linux/platform_data/gpio-omap.h index 6d07eebb3f75..7c36370c062e 100644 --- a/include/linux/platform_data/gpio-omap.h +++ b/include/linux/platform_data/gpio-omap.h @@ -200,8 +200,6 @@ struct omap_gpio_platform_data { bool is_mpuio; /* whether the bank is of type MPUIO */ u32 non_wakeup_gpios; - u32 quirks; /* Version specific quirks mask */ - struct omap_gpio_reg_offs *regs; /* Return context loss count due to PM states changing */ -- cgit v1.2.3 From 14e14aaf61321ba30d0bbdf4c4668f260ca1141c Mon Sep 17 00:00:00 2001 From: Nick Crews Date: Thu, 4 Apr 2019 16:54:15 -0600 Subject: platform/chrome: wilco_ec: Standardize mailbox interface The current API for the wilco EC mailbox interface is bad. It assumes that most messages sent to the EC follow a similar structure, with a command byte in MBOX[0], followed by a junk byte, followed by actual data. This doesn't happen in several cases, such as setting the RTC time, using the raw debugfs interface, and reading or writing properties such as the Peak Shift policy (this last to be submitted soon). Similarly for the response message from the EC, the current interface assumes that the first byte of data is always 0, and the second byte is unused. However, in both setting and getting the RTC time, in the debugfs interface, and for reading and writing properties, this isn't true. The current way to resolve this is to use WILCO_EC_FLAG_RAW* flags to specify when and when not to skip these initial bytes in the sent and received message. They are confusing and used so much that they are normal, and not exceptions. In addition, the first byte of response in the debugfs interface is still always skipped, which is weird, since this raw interface should be giving the entire result. Additionally, sent messages assume the first byte is a command, and so struct wilco_ec_message contains the "command" field. In setting or getting properties however, the first byte is not a command, and so this field has to be filled with a byte that isn't actually a command. This is again inconsistent. wilco_ec_message contains a result field as well, copied from wilco_ec_response->result. The message result field should be removed: if the message fails, the cause is already logged, and the callers are alerted. They will never care about the actual state of the result flag. These flags and different cases make the wilco_ec_transfer() function, used in wilco_ec_mailbox(), really gross, dealing with a bunch of different cases. It's difficult to figure out what it is doing. Finally, making these assumptions about the structure of a message make it so that the messages do not correspond well with the specification for the EC's mailbox interface. For instance, this interface specification may say that MBOX[9] in the received message contains some information, but the calling code needs to remember that the first byte of response is always skipped, and because it didn't set the RESPONSE_RAW flag, the next byte is also skipped, so this information is actually contained within wilco_ec_message->response_data[7]. This makes it difficult to maintain this code in the future. To fix these problems this patch standardizes the mailbox interface by: - Removing the WILCO_EC_FLAG_RAW* flags - Removing the command and reserved_raw bytes from wilco_ec_request - Removing the mbox0 byte from wilco_ec_response - Simplifying wilco_ec_transfer() because of these changes - Gives the callers of wilco_ec_mailbox() the responsibility of exactly and consistently defining the structure of the mailbox request and response - Removing command and result from wilco_ec_message. This results in the reduction of total code, and makes it much more maintainable and understandable. Signed-off-by: Nick Crews Acked-by: Alexandre Belloni Signed-off-by: Enric Balletbo i Serra --- include/linux/platform_data/wilco-ec.h | 22 ++-------------------- 1 file changed, 2 insertions(+), 20 deletions(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/wilco-ec.h b/include/linux/platform_data/wilco-ec.h index 446473a46b88..1ff224793c99 100644 --- a/include/linux/platform_data/wilco-ec.h +++ b/include/linux/platform_data/wilco-ec.h @@ -14,10 +14,6 @@ /* Message flags for using the mailbox() interface */ #define WILCO_EC_FLAG_NO_RESPONSE BIT(0) /* EC does not respond */ #define WILCO_EC_FLAG_EXTENDED_DATA BIT(1) /* EC returns 256 data bytes */ -#define WILCO_EC_FLAG_RAW_REQUEST BIT(2) /* Do not trim request data */ -#define WILCO_EC_FLAG_RAW_RESPONSE BIT(3) /* Do not trim response data */ -#define WILCO_EC_FLAG_RAW (WILCO_EC_FLAG_RAW_REQUEST | \ - WILCO_EC_FLAG_RAW_RESPONSE) /* Normal commands have a maximum 32 bytes of data */ #define EC_MAILBOX_DATA_SIZE 32 @@ -56,10 +52,7 @@ struct wilco_ec_device { * @mailbox_id: Mailbox identifier, specifies the command set. * @mailbox_version: Mailbox interface version %EC_MAILBOX_VERSION * @reserved: Set to zero. - * @data_size: Length of request, data + last 2 bytes of the header. - * @command: Mailbox command code, unique for each mailbox_id set. - * @reserved_raw: Set to zero for most commands, but is used by - * some command types and for raw commands. + * @data_size: Length of following data. */ struct wilco_ec_request { u8 struct_version; @@ -68,8 +61,6 @@ struct wilco_ec_request { u8 mailbox_version; u8 reserved; u16 data_size; - u8 command; - u8 reserved_raw; } __packed; /** @@ -79,8 +70,6 @@ struct wilco_ec_request { * @result: Result code from the EC. Non-zero indicates an error. * @data_size: Length of the response data buffer. * @reserved: Set to zero. - * @mbox0: EC returned data at offset 0 is unused (always 0) so this byte - * is treated as part of the header instead of the data. * @data: Response data buffer. Max size is %EC_MAILBOX_DATA_SIZE_EXTENDED. */ struct wilco_ec_response { @@ -89,7 +78,6 @@ struct wilco_ec_response { u16 result; u16 data_size; u8 reserved[2]; - u8 mbox0; u8 data[0]; } __packed; @@ -111,21 +99,15 @@ enum wilco_ec_msg_type { * struct wilco_ec_message - Request and response message. * @type: Mailbox message type. * @flags: Message flags, e.g. %WILCO_EC_FLAG_NO_RESPONSE. - * @command: Mailbox command code. - * @result: Result code from the EC. Non-zero indicates an error. * @request_size: Number of bytes to send to the EC. * @request_data: Buffer containing the request data. - * @response_size: Number of bytes expected from the EC. - * This is 32 by default and 256 if the flag - * is set for %WILCO_EC_FLAG_EXTENDED_DATA + * @response_size: Number of bytes to read from EC. * @response_data: Buffer containing the response data, should be * response_size bytes and allocated by caller. */ struct wilco_ec_message { enum wilco_ec_msg_type type; u8 flags; - u8 command; - u8 result; size_t request_size; void *request_data; size_t response_size; -- cgit v1.2.3 From 7ebd8b66dd9e5a0b65e5ee5e2b8e7ca382ec97b7 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 17 Apr 2019 06:46:29 -0300 Subject: docs: hwmon: Add an index file and rename docs to *.rst Now that all files were converted to ReST format, rename them and add an index. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Guenter Roeck --- include/linux/platform_data/ads7828.h | 2 +- include/linux/platform_data/ds620.h | 2 +- include/linux/platform_data/ina2xx.h | 2 +- include/linux/platform_data/max197.h | 2 +- include/linux/platform_data/ntc_thermistor.h | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/ads7828.h b/include/linux/platform_data/ads7828.h index 3245f45f9d77..a3370a007702 100644 --- a/include/linux/platform_data/ads7828.h +++ b/include/linux/platform_data/ads7828.h @@ -4,7 +4,7 @@ * Copyright (c) 2012 Savoir-faire Linux Inc. * Vivien Didelot * - * For further information, see the Documentation/hwmon/ads7828 file. + * For further information, see the Documentation/hwmon/ads7828.rst file. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/include/linux/platform_data/ds620.h b/include/linux/platform_data/ds620.h index 6ef58bb77e46..f0ce22a78bb8 100644 --- a/include/linux/platform_data/ds620.h +++ b/include/linux/platform_data/ds620.h @@ -14,7 +14,7 @@ struct ds620_platform_data { * 1 = PO_LOW * 2 = PO_HIGH * - * (see Documentation/hwmon/ds620) + * (see Documentation/hwmon/ds620.rst) */ int pomode; }; diff --git a/include/linux/platform_data/ina2xx.h b/include/linux/platform_data/ina2xx.h index 9f0aa1b48c78..dde59fd3590f 100644 --- a/include/linux/platform_data/ina2xx.h +++ b/include/linux/platform_data/ina2xx.h @@ -7,7 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * For further information, see the Documentation/hwmon/ina2xx file. + * For further information, see the Documentation/hwmon/ina2xx.rst file. */ /** diff --git a/include/linux/platform_data/max197.h b/include/linux/platform_data/max197.h index 8da8f94ee15c..2bbd0919bc89 100644 --- a/include/linux/platform_data/max197.h +++ b/include/linux/platform_data/max197.h @@ -8,7 +8,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * For further information, see the Documentation/hwmon/max197 file. + * For further information, see the Documentation/hwmon/max197.rst file. */ #ifndef _PDATA_MAX197_H diff --git a/include/linux/platform_data/ntc_thermistor.h b/include/linux/platform_data/ntc_thermistor.h index ee03d429742b..5fa115d3ea4b 100644 --- a/include/linux/platform_data/ntc_thermistor.h +++ b/include/linux/platform_data/ntc_thermistor.h @@ -42,7 +42,7 @@ struct ntc_thermistor_platform_data { * read_uV() * * How to setup pullup_ohm, pulldown_ohm, and connect is - * described at Documentation/hwmon/ntc_thermistor + * described at Documentation/hwmon/ntc_thermistor.rst * * pullup/down_ohm: 0 for infinite / not-connected * -- cgit v1.2.3 From 590085f0f25a169772180f57f56deb92b18ea302 Mon Sep 17 00:00:00 2001 From: Robert Shearman Date: Thu, 28 Feb 2019 11:43:42 +0000 Subject: i2c: mux: pca9541: remove support for unused platform data There are no in-tree users of the platform data, so remove it to simplify the code slightly. Remove the now unused pca954x.h platform data header. Signed-off-by: Robert Shearman Signed-off-by: Peter Rosin --- include/linux/platform_data/pca954x.h | 48 ----------------------------------- 1 file changed, 48 deletions(-) delete mode 100644 include/linux/platform_data/pca954x.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/pca954x.h b/include/linux/platform_data/pca954x.h deleted file mode 100644 index 1712677d5904..000000000000 --- a/include/linux/platform_data/pca954x.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * - * pca954x.h - I2C multiplexer/switch support - * - * Copyright (c) 2008-2009 Rodolfo Giometti - * Copyright (c) 2008-2009 Eurotech S.p.A. - * Michael Lawnick - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - - -#ifndef _LINUX_I2C_PCA954X_H -#define _LINUX_I2C_PCA954X_H - -/* Platform data for the PCA954x I2C multiplexers */ - -/* Per channel initialisation data: - * @adap_id: bus number for the adapter. 0 = don't care - * @deselect_on_exit: set this entry to 1, if your H/W needs deselection - * of this channel after transaction. - * - */ -struct pca954x_platform_mode { - int adap_id; - unsigned int deselect_on_exit:1; - unsigned int class; -}; - -/* Per mux/switch data, used with i2c_register_board_info */ -struct pca954x_platform_data { - struct pca954x_platform_mode *modes; - int num_modes; -}; - -#endif /* _LINUX_I2C_PCA954X_H */ -- cgit v1.2.3 From 13e0b4059b984a1c63cae5604e1f665472751ea1 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sat, 26 Jan 2019 00:49:19 +0100 Subject: clocksource/drivers/ixp4xx: Add driver This adds a new slightly rewritten timer driver for the Intel IXP4xx clocksource, clockevent and delay timer. Cc: Daniel Lezcano Cc: Thomas Gleixner Signed-off-by: Linus Walleij --- include/linux/platform_data/timer-ixp4xx.h | 11 +++++++++++ 1 file changed, 11 insertions(+) create mode 100644 include/linux/platform_data/timer-ixp4xx.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/timer-ixp4xx.h b/include/linux/platform_data/timer-ixp4xx.h new file mode 100644 index 000000000000..ee92ae7edaed --- /dev/null +++ b/include/linux/platform_data/timer-ixp4xx.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __TIMER_IXP4XX_H +#define __TIMER_IXP4XX_H + +#include + +void __init ixp4xx_timer_setup(resource_size_t timerbase, + int timer_irq, + unsigned int timer_freq); + +#endif -- cgit v1.2.3 From 1b8c813695dcff87b58ad1916bff2299dcf01c7f Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 15 Apr 2019 22:17:09 +0200 Subject: ARM: ep93xx: move network platform data to separate header The header file is the only thing preventing us from building the driver in a cross-platform configuration, so move the structure we are interested in to the global platform_data location and enable compile testing. Acked-by: Alexander Sverdlin Acked-by: H Hartley Sweeten Signed-off-by: Arnd Bergmann Signed-off-by: Olof Johansson --- include/linux/platform_data/eth-ep93xx.h | 10 ++++++++++ 1 file changed, 10 insertions(+) create mode 100644 include/linux/platform_data/eth-ep93xx.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/eth-ep93xx.h b/include/linux/platform_data/eth-ep93xx.h new file mode 100644 index 000000000000..8eef637a804d --- /dev/null +++ b/include/linux/platform_data/eth-ep93xx.h @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _LINUX_PLATFORM_DATA_ETH_EP93XX +#define _LINUX_PLATFORM_DATA_ETH_EP93XX + +struct ep93xx_eth_data { + unsigned char dev_addr[6]; + unsigned char phy_id; +}; + +#endif -- cgit v1.2.3 From dfb6db007a56998e53e5ba5fb798b2e830b7feca Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 15 Apr 2019 22:17:10 +0200 Subject: ARM: ep93xx: keypad: stop using mach/platform.h We can communicate the clock rate using platform data rather than setting a flag to use a particular value in the driver, which is cleaner and avoids the dependency. No platform in the kernel currently defines the ep93xx keypad device structure, so this is a rather pointless excercise. Any out of tree users are probably dead now, but if not, they have to change their platform code to match the new platform_data structure. Acked-by: H Hartley Sweeten Signed-off-by: Arnd Bergmann Signed-off-by: Olof Johansson --- include/linux/platform_data/keypad-ep93xx.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/keypad-ep93xx.h b/include/linux/platform_data/keypad-ep93xx.h index 0e36818e3680..3054fced8509 100644 --- a/include/linux/platform_data/keypad-ep93xx.h +++ b/include/linux/platform_data/keypad-ep93xx.h @@ -9,8 +9,7 @@ struct matrix_keymap_data; #define EP93XX_KEYPAD_DIAG_MODE (1<<1) /* diagnostic mode */ #define EP93XX_KEYPAD_BACK_DRIVE (1<<2) /* back driving mode */ #define EP93XX_KEYPAD_TEST_MODE (1<<3) /* scan only column 0 */ -#define EP93XX_KEYPAD_KDIV (1<<4) /* 1/4 clock or 1/16 clock */ -#define EP93XX_KEYPAD_AUTOREPEAT (1<<5) /* enable key autorepeat */ +#define EP93XX_KEYPAD_AUTOREPEAT (1<<4) /* enable key autorepeat */ /** * struct ep93xx_keypad_platform_data - platform specific device structure @@ -24,6 +23,7 @@ struct ep93xx_keypad_platform_data { unsigned int debounce; unsigned int prescale; unsigned int flags; + unsigned int clk_rate; }; #define EP93XX_MATRIX_ROWS (8) -- cgit v1.2.3 From 8425c41d1ef762cc15d9501d7117f009a79f3fe9 Mon Sep 17 00:00:00 2001 From: Esben Haabendal Date: Tue, 30 Apr 2019 09:17:49 +0200 Subject: net: ll_temac: Extend support to non-device-tree platforms Support initialization with platdata, so the driver can be used on non-device-tree platforms. For currently supported device-tree platforms, the driver should behave as before. Signed-off-by: Esben Haabendal Signed-off-by: David S. Miller --- include/linux/platform_data/xilinx-ll-temac.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) create mode 100644 include/linux/platform_data/xilinx-ll-temac.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/xilinx-ll-temac.h b/include/linux/platform_data/xilinx-ll-temac.h new file mode 100644 index 000000000000..82e2f80648b0 --- /dev/null +++ b/include/linux/platform_data/xilinx-ll-temac.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __LINUX_XILINX_LL_TEMAC_H +#define __LINUX_XILINX_LL_TEMAC_H + +#include +#include + +struct ll_temac_platform_data { + bool txcsum; /* Enable/disable TX checksum */ + bool rxcsum; /* Enable/disable RX checksum */ + u8 mac_addr[ETH_ALEN]; /* MAC address (6 bytes) */ + /* Clock frequency for input to MDIO clock generator */ + u32 mdio_clk_freq; + unsigned long long mdio_bus_id; /* Unique id for MDIO bus */ + int phy_addr; /* Address of the PHY to connect to */ + phy_interface_t phy_interface; /* PHY interface mode */ +}; + +#endif /* __LINUX_XILINX_LL_TEMAC_H */ -- cgit v1.2.3 From a3246dc41aa3c9d799478ccc8dac5d19c509a923 Mon Sep 17 00:00:00 2001 From: Esben Haabendal Date: Tue, 30 Apr 2019 09:17:51 +0200 Subject: net: ll_temac: Add support for non-native register endianness Replace the powerpc specific MMIO register access functions with the generic big-endian mmio access functions, and add support for little-endian access depending on configuration. Big-endian access is maintained as the default, but little-endian can be configured in device-tree binding or in platform data. The temac_ior()/temac_iow() functions are replaced with macro wrappers to avoid modifying existing code more than necessary. Signed-off-by: Esben Haabendal Signed-off-by: David S. Miller --- include/linux/platform_data/xilinx-ll-temac.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/xilinx-ll-temac.h b/include/linux/platform_data/xilinx-ll-temac.h index 82e2f80648b0..af87927abab3 100644 --- a/include/linux/platform_data/xilinx-ll-temac.h +++ b/include/linux/platform_data/xilinx-ll-temac.h @@ -14,6 +14,8 @@ struct ll_temac_platform_data { unsigned long long mdio_bus_id; /* Unique id for MDIO bus */ int phy_addr; /* Address of the PHY to connect to */ phy_interface_t phy_interface; /* PHY interface mode */ + bool reg_little_endian; /* Little endian TEMAC register access */ + bool dma_little_endian; /* Little endian DMA register access */ }; #endif /* __LINUX_XILINX_LL_TEMAC_H */ -- cgit v1.2.3 From f14f5c11f051ca4a41e65017d94408e5e702ba9d Mon Sep 17 00:00:00 2001 From: Esben Haabendal Date: Tue, 30 Apr 2019 09:17:54 +0200 Subject: net: ll_temac: Support indirect_mutex share within TEMAC IP Indirect register access goes through a DCR bus bridge, which allows only one outstanding transaction. And to make matters worse, each TEMAC IP block contains two Ethernet interfaces, and although they seem to have separate registers for indirect access, they actually share the registers. Or to be more specific, MSW, LSW and CTL registers are physically shared between Ethernet interfaces in same TEMAC IP, with RDY register being (almost) specificic to the Ethernet interface. The 0x10000 bit in RDY reflects combined bus ready state though. So we need to take care to synchronize not only within a single device, but also between devices in same TEMAC IP. This commit allows to do that with legacy platform devices. For OF devices, the xlnx,compound parent of the temac node should be used to find siblings, and setup a shared indirect_mutex between them. I will leave this work to somebody else, as I don't have hardware to test that. No regression is introduced by that, as before this commit using two Ethernet interfaces in same TEMAC block is simply broken. Signed-off-by: Esben Haabendal Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- include/linux/platform_data/xilinx-ll-temac.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/xilinx-ll-temac.h b/include/linux/platform_data/xilinx-ll-temac.h index af87927abab3..b0b8238a9b7d 100644 --- a/include/linux/platform_data/xilinx-ll-temac.h +++ b/include/linux/platform_data/xilinx-ll-temac.h @@ -16,6 +16,12 @@ struct ll_temac_platform_data { phy_interface_t phy_interface; /* PHY interface mode */ bool reg_little_endian; /* Little endian TEMAC register access */ bool dma_little_endian; /* Little endian DMA register access */ + /* Pre-initialized mutex to use for synchronizing indirect + * register access. When using both interfaces of a single + * TEMAC IP block, the same mutex should be passed here, as + * they share the same DCR bus bridge. + */ + struct mutex *indirect_mutex; }; #endif /* __LINUX_XILINX_LL_TEMAC_H */ -- cgit v1.2.3 From 7e97a194aca03c6ff86f84e46e196f5c9ed5c32c Mon Sep 17 00:00:00 2001 From: Esben Haabendal Date: Tue, 30 Apr 2019 09:17:58 +0200 Subject: net: ll_temac: Allow configuration of IRQ coalescing This allows custom setup of IRQ coalescing for platforms using legacy platform_device. The irq timeout and count parameters can be used for tuning cpu load vs. latency. I have maintained the 0x00000400 bit in TX_CHNL_CTRL. It is specified as unused in the documentation I have available. It does not make any difference in the hardware I have available, so it is left in to not risk breaking other platforms where it might be used. Signed-off-by: Esben Haabendal Signed-off-by: David S. Miller --- include/linux/platform_data/xilinx-ll-temac.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/xilinx-ll-temac.h b/include/linux/platform_data/xilinx-ll-temac.h index b0b8238a9b7d..368530f98176 100644 --- a/include/linux/platform_data/xilinx-ll-temac.h +++ b/include/linux/platform_data/xilinx-ll-temac.h @@ -22,6 +22,11 @@ struct ll_temac_platform_data { * they share the same DCR bus bridge. */ struct mutex *indirect_mutex; + /* DMA channel control setup */ + u8 tx_irq_timeout; /* TX Interrupt Delay Time-out */ + u8 tx_irq_count; /* TX Interrupt Coalescing Threshold Count */ + u8 rx_irq_timeout; /* RX Interrupt Delay Time-out */ + u8 rx_irq_count; /* RX Interrupt Coalescing Threshold Count */ }; #endif /* __LINUX_XILINX_LL_TEMAC_H */ -- cgit v1.2.3 From 1dfbf334f12361ebe6269c5918328b755ee960c7 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sat, 20 Apr 2019 13:05:59 +0200 Subject: spi: ep93xx: Convert to use CS GPIO descriptors This converts the EP93xx SPI master driver to use GPIO descriptors for chip select handling. EP93xx was using platform data to pass in GPIO lines, by converting all board files to use GPIO descriptor tables the core will look up the GPIO lines from the SPI device in the same manner as for device tree. Signed-off-by: Linus Walleij Signed-off-by: Mark Brown --- include/linux/platform_data/spi-ep93xx.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/spi-ep93xx.h b/include/linux/platform_data/spi-ep93xx.h index eb16c6739ac2..b439f2a896e0 100644 --- a/include/linux/platform_data/spi-ep93xx.h +++ b/include/linux/platform_data/spi-ep93xx.h @@ -6,13 +6,9 @@ struct spi_device; /** * struct ep93xx_spi_info - EP93xx specific SPI descriptor - * @chipselect: array of gpio numbers to use as chip selects - * @num_chipselect: ARRAY_SIZE(chipselect) * @use_dma: use DMA for the transfers */ struct ep93xx_spi_info { - int *chipselect; - int num_chipselect; bool use_dma; }; -- cgit v1.2.3 From 8b952747844526cef50fa2e0ae903f586e3cb2e4 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Fri, 3 May 2019 12:36:58 +0200 Subject: net: macb: shrink macb_platform_data structure This structure was used intensively for machine specific values when DT was not used. Since the removal of AVR32 from the kernel, this structure is only used for passing clocks from PCI macb wrapper, all other fields being 0. All other known platforms use DT. Remove the leftovers but make sure that PCI macb still works as expected by using default values: - phydev->irq is set to PHY_POLL by mdiobus_alloc() - mii_bus->phy_mask is cleared while allocating it - bp->phy_interface is set to PHY_INTERFACE_MODE_MII if mode not found in DT. This simplifies driver probe path and particularly phy handling. Signed-off-by: Nicolas Ferre Signed-off-by: David S. Miller --- include/linux/platform_data/macb.h | 9 --------- 1 file changed, 9 deletions(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/macb.h b/include/linux/platform_data/macb.h index 7815d50c26ff..2bc51b822956 100644 --- a/include/linux/platform_data/macb.h +++ b/include/linux/platform_data/macb.h @@ -12,19 +12,10 @@ /** * struct macb_platform_data - platform data for MACB Ethernet - * @phy_mask: phy mask passed when register the MDIO bus - * within the driver - * @phy_irq_pin: PHY IRQ - * @is_rmii: using RMII interface? - * @rev_eth_addr: reverse Ethernet address byte order * @pclk: platform clock * @hclk: AHB clock */ struct macb_platform_data { - u32 phy_mask; - int phy_irq_pin; - u8 is_rmii; - u8 rev_eth_addr; struct clk *pclk; struct clk *hclk; }; -- cgit v1.2.3 From a27415decd84dac124c6185f1184b6c779d0a5ab Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Wed, 1 May 2019 00:10:50 +0200 Subject: net: dsa: mv88e6xxx: Pass interrupt number in platform data Allow an interrupt number to be passed in the platform data. The driver will then use it if not zero, otherwise it will poll for interrupts. Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller --- include/linux/platform_data/mv88e6xxx.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/mv88e6xxx.h b/include/linux/platform_data/mv88e6xxx.h index 963730b44aea..21452a9365e1 100644 --- a/include/linux/platform_data/mv88e6xxx.h +++ b/include/linux/platform_data/mv88e6xxx.h @@ -13,6 +13,7 @@ struct dsa_mv88e6xxx_pdata { unsigned int enabled_ports; struct net_device *netdev; u32 eeprom_len; + int irq; }; #endif -- cgit v1.2.3 From 487579bab867e739be3d2c0064ad3af1221482c8 Mon Sep 17 00:00:00 2001 From: Chris Chiu Date: Thu, 18 Apr 2019 14:46:48 +0800 Subject: platform/x86: asus-wmi: Add fn-lock mode switch support Some of latest ASUS laptops support new fn-lock mode switching. This commit detect whether if the fn-lock option is enabled in BIOS setting, and toggle the fn-lock mode via a new WMI DEVID 0x00100023 when the corresponding notify code captured. The ASUS fn-lock mode switch is activated by pressing Fn+Esc. When on, keys F1 to F12 behave as applicable, with meanings defined by the application being used at the time. When off, F1 to F12 directly triggers hardware features, well known audio volume up/down, brightness up/down...etc, which were triggered by holding down Fn key and F-keys. Because there's no way to retrieve the fn-lock mode via existing WMI methods per ASUS spec, driver need to initialize and keep the fn-lock mode by itself. Signed-off-by: Chris Chiu Reviewed-by: Daniel Drake Signed-off-by: Andy Shevchenko --- include/linux/platform_data/x86/asus-wmi.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/x86/asus-wmi.h b/include/linux/platform_data/x86/asus-wmi.h index 53dfc2541960..bfba245636a7 100644 --- a/include/linux/platform_data/x86/asus-wmi.h +++ b/include/linux/platform_data/x86/asus-wmi.h @@ -67,6 +67,7 @@ /* Input */ #define ASUS_WMI_DEVID_TOUCHPAD 0x00100011 #define ASUS_WMI_DEVID_TOUCHPAD_LED 0x00100012 +#define ASUS_WMI_DEVID_FNLOCK 0x00100023 /* Fan, Thermal */ #define ASUS_WMI_DEVID_THERMAL_CTRL 0x00110011 -- cgit v1.2.3 From a57140e9a850582ddafdd8f115b78713baaf0d00 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Tue, 7 May 2019 23:09:13 +0200 Subject: MIPS: SGI-IP27: use generic PCI driver Converted bridge code to a platform driver using the PCI generic driver framework and use adding platform devices during xtalk scan. This allows easier sharing bridge driver for other SGI platforms like IP30 (Octane) and IP35 (Origin 3k, Fuel, Tezro). Signed-off-by: Thomas Bogendoerfer [paul.burton@mips.com: - Leave __phys_to_dma(), __dma_to_phys() & pcibus_to_node() in arch/mips/pci/pci-ip27.c since the motivation for moving them disappeared when the driver stopped being moved to drivers/pci.] Signed-off-by: Paul Burton Cc: Ralf Baechle Cc: James Hogan Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org --- include/linux/platform_data/xtalk-bridge.h | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 include/linux/platform_data/xtalk-bridge.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/xtalk-bridge.h b/include/linux/platform_data/xtalk-bridge.h new file mode 100644 index 000000000000..51e5001f2c05 --- /dev/null +++ b/include/linux/platform_data/xtalk-bridge.h @@ -0,0 +1,22 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * SGI PCI Xtalk Bridge + */ + +#ifndef PLATFORM_DATA_XTALK_BRIDGE_H +#define PLATFORM_DATA_XTALK_BRIDGE_H + +#include + +struct xtalk_bridge_platform_data { + struct resource mem; + struct resource io; + unsigned long bridge_addr; + unsigned long intr_addr; + unsigned long mem_offset; + unsigned long io_offset; + nasid_t nasid; + int masterwid; +}; + +#endif /* PLATFORM_DATA_XTALK_BRIDGE_H */ -- cgit v1.2.3 From 8fbce8efe15cd2ca7a4947bc814f890dbe4e43d7 Mon Sep 17 00:00:00 2001 From: Brian Masney Date: Wed, 24 Apr 2019 05:25:05 -0400 Subject: backlight: lm3630a: Add firmware node support Add fwnode support to the lm3630a driver and optionally allow configuring the label, default brightness level, and maximum brightness level. The two outputs can be controlled by bank A and B independently or bank A can control both outputs. If the platform data was not configured, then the driver defaults to enabling both banks. This patch changes the default value to disable both banks before parsing the firmware node so that just a single bank can be enabled if desired. There are no in-tree users of this driver. Driver was tested on a LG Nexus 5 (hammerhead) phone. Signed-off-by: Brian Masney Reviewed-by: Dan Murphy Acked-by: Daniel Thompson Acked-by: Pavel Machek Signed-off-by: Lee Jones --- include/linux/platform_data/lm3630a_bl.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/lm3630a_bl.h b/include/linux/platform_data/lm3630a_bl.h index 7538e38e270b..762e68956f31 100644 --- a/include/linux/platform_data/lm3630a_bl.h +++ b/include/linux/platform_data/lm3630a_bl.h @@ -38,9 +38,11 @@ enum lm3630a_ledb_ctrl { #define LM3630A_MAX_BRIGHTNESS 255 /* + *@leda_label : optional led a label. *@leda_init_brt : led a init brightness. 4~255 *@leda_max_brt : led a max brightness. 4~255 *@leda_ctrl : led a disable, enable linear, enable exponential + *@ledb_label : optional led b label. *@ledb_init_brt : led b init brightness. 4~255 *@ledb_max_brt : led b max brightness. 4~255 *@ledb_ctrl : led b disable, enable linear, enable exponential @@ -50,10 +52,12 @@ enum lm3630a_ledb_ctrl { struct lm3630a_platform_data { /* led a config. */ + const char *leda_label; int leda_init_brt; int leda_max_brt; enum lm3630a_leda_ctrl leda_ctrl; /* led b config. */ + const char *ledb_label; int ledb_init_brt; int ledb_max_brt; enum lm3630a_ledb_ctrl ledb_ctrl; -- cgit v1.2.3