From c992219825823cad5e11fab3854eb93df2e9ffa1 Mon Sep 17 00:00:00 2001 From: Solomon Peachy Date: Sun, 2 Jun 2013 09:53:01 -0400 Subject: cw1200: move platform_data header to correct location. (As suggested by Arnd Bergmann) Signed-off-by: Solomon Peachy Signed-off-by: John W. Linville --- include/linux/platform_data/cw1200_platform.h | 46 +++++++++++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 include/linux/platform_data/cw1200_platform.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/cw1200_platform.h b/include/linux/platform_data/cw1200_platform.h new file mode 100644 index 000000000000..c168fa512347 --- /dev/null +++ b/include/linux/platform_data/cw1200_platform.h @@ -0,0 +1,46 @@ +/* + * Copyright (C) ST-Ericsson SA 2011 + * + * Author: Dmitry Tarnyagin + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef CW1200_PLAT_H_INCLUDED +#define CW1200_PLAT_H_INCLUDED + +struct cw1200_platform_data_spi { + u8 spi_bits_per_word; /* REQUIRED */ + u16 ref_clk; /* REQUIRED (in KHz) */ + + /* All others are optional */ + bool have_5ghz; + const struct resource *reset; /* GPIO to RSTn signal */ + const struct resource *powerup; /* GPIO to POWERUP signal */ + int (*power_ctrl)(const struct cw1200_platform_data_spi *pdata, + bool enable); /* Control 3v3 / 1v8 supply */ + int (*clk_ctrl)(const struct cw1200_platform_data_spi *pdata, + bool enable); /* Control CLK32K */ + const u8 *macaddr; /* if NULL, use cw1200_mac_template module parameter */ + const char *sdd_file; /* if NULL, will use default for detected hw type */ +}; + +struct cw1200_platform_data_sdio { + u16 ref_clk; /* REQUIRED (in KHz) */ + + /* All others are optional */ + const struct resource *irq; /* if using GPIO for IRQ */ + bool have_5ghz; + bool no_nptb; /* SDIO hardware does not support non-power-of-2-blocksizes */ + const struct resource *reset; /* GPIO to RSTn signal */ + const struct resource *powerup; /* GPIO to POWERUP signal */ + int (*power_ctrl)(const struct cw1200_platform_data_sdio *pdata, + bool enable); /* Control 3v3 / 1v8 supply */ + int (*clk_ctrl)(const struct cw1200_platform_data_sdio *pdata, + bool enable); /* Control CLK32K */ + const u8 *macaddr; /* if NULL, use cw1200_mac_template module parameter */ + const char *sdd_file; /* if NULL, will use default for detected hw type */ +}; + +const void *cw1200_get_platform_data(void); + +#endif /* CW1200_PLAT_H_INCLUDED */ -- cgit v1.2.3 From 6dd64a304eff76ca7dd41bf63df55efa965fa9ec Mon Sep 17 00:00:00 2001 From: Solomon Peachy Date: Sun, 2 Jun 2013 09:53:03 -0400 Subject: cw1200: Replace use of 'struct resource' with 'int' for GPIO fields. The only advantage of 'struct resource' is that it lets us assign names as part of the platform data. Unfortunately since we are using platform data, we are already limited to a single instance of each driver, rendering this moot. So, replace the struct resources with ints, resulting in cleaner code. This was based on a suggestion from Arnd Bergmann. Signed-off-by: Solomon Peachy Signed-off-by: John W. Linville --- include/linux/platform_data/cw1200_platform.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/cw1200_platform.h b/include/linux/platform_data/cw1200_platform.h index c168fa512347..4454c16ea3e5 100644 --- a/include/linux/platform_data/cw1200_platform.h +++ b/include/linux/platform_data/cw1200_platform.h @@ -14,8 +14,8 @@ struct cw1200_platform_data_spi { /* All others are optional */ bool have_5ghz; - const struct resource *reset; /* GPIO to RSTn signal */ - const struct resource *powerup; /* GPIO to POWERUP signal */ + int reset; /* GPIO to RSTn signal (0 disables) */ + int powerup; /* GPIO to POWERUP signal (0 disables) */ int (*power_ctrl)(const struct cw1200_platform_data_spi *pdata, bool enable); /* Control 3v3 / 1v8 supply */ int (*clk_ctrl)(const struct cw1200_platform_data_spi *pdata, @@ -28,11 +28,11 @@ struct cw1200_platform_data_sdio { u16 ref_clk; /* REQUIRED (in KHz) */ /* All others are optional */ - const struct resource *irq; /* if using GPIO for IRQ */ bool have_5ghz; - bool no_nptb; /* SDIO hardware does not support non-power-of-2-blocksizes */ - const struct resource *reset; /* GPIO to RSTn signal */ - const struct resource *powerup; /* GPIO to POWERUP signal */ + bool no_nptb; /* SDIO hardware does not support non-power-of-2-blocksizes */ + int reset; /* GPIO to RSTn signal (0 disables) */ + int powerup; /* GPIO to POWERUP signal (0 disables) */ + int irq; /* IRQ line or 0 to use SDIO IRQ */ int (*power_ctrl)(const struct cw1200_platform_data_sdio *pdata, bool enable); /* Control 3v3 / 1v8 supply */ int (*clk_ctrl)(const struct cw1200_platform_data_sdio *pdata, -- cgit v1.2.3 From 7c0b6f49dbea0b09b1de8aa5c942af9c2ad8b54c Mon Sep 17 00:00:00 2001 From: Solomon Peachy Date: Sun, 2 Jun 2013 11:35:31 -0400 Subject: cw1200: Rework SDIO platform support to prevent build problems. Based on discussions with And Bergmann, this patch changes the SDIO platform code to default to supporting the Sagrad devices, allowing for it to be overridden in board setup code. This renders the cw1200_sagrad module suplerflous, so it is now removed. It also moves the documentation that was in the cw1200_sagrad source to the platform header. Signed-off-by: Solomon Peachy Signed-off-by: John W. Linville --- include/linux/platform_data/cw1200_platform.h | 37 ++++++++++++++++++++++++++- 1 file changed, 36 insertions(+), 1 deletion(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/cw1200_platform.h b/include/linux/platform_data/cw1200_platform.h index 4454c16ea3e5..c6fbc3ce4ab0 100644 --- a/include/linux/platform_data/cw1200_platform.h +++ b/include/linux/platform_data/cw1200_platform.h @@ -41,6 +41,41 @@ struct cw1200_platform_data_sdio { const char *sdd_file; /* if NULL, will use default for detected hw type */ }; -const void *cw1200_get_platform_data(void); + +/* An example of SPI support in your board setup file: + + static struct cw1200_platform_data_spi cw1200_platform_data = { + .ref_clk = 38400, + .spi_bits_per_word = 16, + .reset = GPIO_RF_RESET, + .powerup = GPIO_RF_POWERUP, + .macaddr = wifi_mac_addr, + .sdd_file = "sdd_sagrad_1091_1098.bin", + }; + static struct spi_board_info myboard_spi_devices[] __initdata = { + { + .modalias = "cw1200_wlan_spi", + .max_speed_hz = 52000000, + .bus_num = 0, + .irq = WIFI_IRQ, + .platform_data = &cw1200_platform_data, + .chip_select = 0, + }, + }; + + */ + +/* An example of SDIO support in your board setup file: + + static struct cw1200_platform_data_sdio my_cw1200_platform_data = { + .ref_clk = 38400, + .have_5ghz = false, + .sdd_file = "sdd_myplatform.bin", + }; + cw1200_sdio_set_platform_data(&my_cw1200_platform_data); + + */ + +void __init cw1200_sdio_set_platform_data(struct cw1200_platform_data_sdio *pdata); #endif /* CW1200_PLAT_H_INCLUDED */ -- cgit v1.2.3 From 4da2a54a842db6921289e3e25b0739531a594dea Mon Sep 17 00:00:00 2001 From: Solomon Peachy Date: Sun, 2 Jun 2013 11:35:32 -0400 Subject: cw1200: rename the cw1200 platform definition header My previous patch just moved the file, but it also needed to be renamed to conform to proper conventions. Signed-off-by: Solomon Peachy Signed-off-by: John W. Linville --- include/linux/platform_data/cw1200_platform.h | 81 --------------------------- include/linux/platform_data/net-cw1200.h | 81 +++++++++++++++++++++++++++ 2 files changed, 81 insertions(+), 81 deletions(-) delete mode 100644 include/linux/platform_data/cw1200_platform.h create mode 100644 include/linux/platform_data/net-cw1200.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/cw1200_platform.h b/include/linux/platform_data/cw1200_platform.h deleted file mode 100644 index c6fbc3ce4ab0..000000000000 --- a/include/linux/platform_data/cw1200_platform.h +++ /dev/null @@ -1,81 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2011 - * - * Author: Dmitry Tarnyagin - * License terms: GNU General Public License (GPL) version 2 - */ - -#ifndef CW1200_PLAT_H_INCLUDED -#define CW1200_PLAT_H_INCLUDED - -struct cw1200_platform_data_spi { - u8 spi_bits_per_word; /* REQUIRED */ - u16 ref_clk; /* REQUIRED (in KHz) */ - - /* All others are optional */ - bool have_5ghz; - int reset; /* GPIO to RSTn signal (0 disables) */ - int powerup; /* GPIO to POWERUP signal (0 disables) */ - int (*power_ctrl)(const struct cw1200_platform_data_spi *pdata, - bool enable); /* Control 3v3 / 1v8 supply */ - int (*clk_ctrl)(const struct cw1200_platform_data_spi *pdata, - bool enable); /* Control CLK32K */ - const u8 *macaddr; /* if NULL, use cw1200_mac_template module parameter */ - const char *sdd_file; /* if NULL, will use default for detected hw type */ -}; - -struct cw1200_platform_data_sdio { - u16 ref_clk; /* REQUIRED (in KHz) */ - - /* All others are optional */ - bool have_5ghz; - bool no_nptb; /* SDIO hardware does not support non-power-of-2-blocksizes */ - int reset; /* GPIO to RSTn signal (0 disables) */ - int powerup; /* GPIO to POWERUP signal (0 disables) */ - int irq; /* IRQ line or 0 to use SDIO IRQ */ - int (*power_ctrl)(const struct cw1200_platform_data_sdio *pdata, - bool enable); /* Control 3v3 / 1v8 supply */ - int (*clk_ctrl)(const struct cw1200_platform_data_sdio *pdata, - bool enable); /* Control CLK32K */ - const u8 *macaddr; /* if NULL, use cw1200_mac_template module parameter */ - const char *sdd_file; /* if NULL, will use default for detected hw type */ -}; - - -/* An example of SPI support in your board setup file: - - static struct cw1200_platform_data_spi cw1200_platform_data = { - .ref_clk = 38400, - .spi_bits_per_word = 16, - .reset = GPIO_RF_RESET, - .powerup = GPIO_RF_POWERUP, - .macaddr = wifi_mac_addr, - .sdd_file = "sdd_sagrad_1091_1098.bin", - }; - static struct spi_board_info myboard_spi_devices[] __initdata = { - { - .modalias = "cw1200_wlan_spi", - .max_speed_hz = 52000000, - .bus_num = 0, - .irq = WIFI_IRQ, - .platform_data = &cw1200_platform_data, - .chip_select = 0, - }, - }; - - */ - -/* An example of SDIO support in your board setup file: - - static struct cw1200_platform_data_sdio my_cw1200_platform_data = { - .ref_clk = 38400, - .have_5ghz = false, - .sdd_file = "sdd_myplatform.bin", - }; - cw1200_sdio_set_platform_data(&my_cw1200_platform_data); - - */ - -void __init cw1200_sdio_set_platform_data(struct cw1200_platform_data_sdio *pdata); - -#endif /* CW1200_PLAT_H_INCLUDED */ diff --git a/include/linux/platform_data/net-cw1200.h b/include/linux/platform_data/net-cw1200.h new file mode 100644 index 000000000000..c6fbc3ce4ab0 --- /dev/null +++ b/include/linux/platform_data/net-cw1200.h @@ -0,0 +1,81 @@ +/* + * Copyright (C) ST-Ericsson SA 2011 + * + * Author: Dmitry Tarnyagin + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef CW1200_PLAT_H_INCLUDED +#define CW1200_PLAT_H_INCLUDED + +struct cw1200_platform_data_spi { + u8 spi_bits_per_word; /* REQUIRED */ + u16 ref_clk; /* REQUIRED (in KHz) */ + + /* All others are optional */ + bool have_5ghz; + int reset; /* GPIO to RSTn signal (0 disables) */ + int powerup; /* GPIO to POWERUP signal (0 disables) */ + int (*power_ctrl)(const struct cw1200_platform_data_spi *pdata, + bool enable); /* Control 3v3 / 1v8 supply */ + int (*clk_ctrl)(const struct cw1200_platform_data_spi *pdata, + bool enable); /* Control CLK32K */ + const u8 *macaddr; /* if NULL, use cw1200_mac_template module parameter */ + const char *sdd_file; /* if NULL, will use default for detected hw type */ +}; + +struct cw1200_platform_data_sdio { + u16 ref_clk; /* REQUIRED (in KHz) */ + + /* All others are optional */ + bool have_5ghz; + bool no_nptb; /* SDIO hardware does not support non-power-of-2-blocksizes */ + int reset; /* GPIO to RSTn signal (0 disables) */ + int powerup; /* GPIO to POWERUP signal (0 disables) */ + int irq; /* IRQ line or 0 to use SDIO IRQ */ + int (*power_ctrl)(const struct cw1200_platform_data_sdio *pdata, + bool enable); /* Control 3v3 / 1v8 supply */ + int (*clk_ctrl)(const struct cw1200_platform_data_sdio *pdata, + bool enable); /* Control CLK32K */ + const u8 *macaddr; /* if NULL, use cw1200_mac_template module parameter */ + const char *sdd_file; /* if NULL, will use default for detected hw type */ +}; + + +/* An example of SPI support in your board setup file: + + static struct cw1200_platform_data_spi cw1200_platform_data = { + .ref_clk = 38400, + .spi_bits_per_word = 16, + .reset = GPIO_RF_RESET, + .powerup = GPIO_RF_POWERUP, + .macaddr = wifi_mac_addr, + .sdd_file = "sdd_sagrad_1091_1098.bin", + }; + static struct spi_board_info myboard_spi_devices[] __initdata = { + { + .modalias = "cw1200_wlan_spi", + .max_speed_hz = 52000000, + .bus_num = 0, + .irq = WIFI_IRQ, + .platform_data = &cw1200_platform_data, + .chip_select = 0, + }, + }; + + */ + +/* An example of SDIO support in your board setup file: + + static struct cw1200_platform_data_sdio my_cw1200_platform_data = { + .ref_clk = 38400, + .have_5ghz = false, + .sdd_file = "sdd_myplatform.bin", + }; + cw1200_sdio_set_platform_data(&my_cw1200_platform_data); + + */ + +void __init cw1200_sdio_set_platform_data(struct cw1200_platform_data_sdio *pdata); + +#endif /* CW1200_PLAT_H_INCLUDED */ -- cgit v1.2.3 From 3b81a6809480f3fc7d9d06562704c8df18ecec00 Mon Sep 17 00:00:00 2001 From: Franky Lin Date: Wed, 26 Jun 2013 14:20:18 +0200 Subject: brcmfmac: add broken scatter-gather DMA support DMA engine of some old SDIO host controllers require block size alignment for data length of each scatterlist item. This patch introduces an intermediate buffer list to support this kind of platform. It decreases the throughput because of an extra memcpy in critical data path. So don't turn this on unless it's necessary. Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Arend van Spriel Signed-off-by: Franky Lin Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- include/linux/platform_data/brcmfmac-sdio.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/brcmfmac-sdio.h b/include/linux/platform_data/brcmfmac-sdio.h index 1ade657d5fc1..b7174998c24a 100644 --- a/include/linux/platform_data/brcmfmac-sdio.h +++ b/include/linux/platform_data/brcmfmac-sdio.h @@ -90,6 +90,10 @@ void __init brcmfmac_init_pdata(void) * oob_irq_nr, oob_irq_flags: the OOB interrupt information. The values are * used for registering the irq using request_irq function. * + * broken_sg_support: flag for broken sg list support of SDIO host controller. + * Set this to true if the SDIO host controller has higher align requirement + * than 32 bytes for each scatterlist item. + * * power_on: This function is called by the brcmfmac when the module gets * loaded. This can be particularly useful for low power devices. The platform * spcific routine may for example decide to power up the complete device. @@ -116,6 +120,7 @@ struct brcmfmac_sdio_platform_data { bool oob_irq_supported; unsigned int oob_irq_nr; unsigned long oob_irq_flags; + bool broken_sg_support; void (*power_on)(void); void (*power_off)(void); void (*reset)(void); -- cgit v1.2.3