From f15fc9b12286f64c2b9a8b90f2bcb94915b2c18b Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 13 Nov 2017 18:27:39 +0100 Subject: ARM: pxa: move header file out of I2C realm include/linux/i2c is to be deprecated. Move this platform_data to the proper platform_data dir. Signed-off-by: Wolfram Sang Signed-off-by: Robert Jarzmik --- include/linux/platform_data/i2c-pxa.h | 74 +++++++++++++++++++++++++++++++++++ 1 file changed, 74 insertions(+) create mode 100644 include/linux/platform_data/i2c-pxa.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/i2c-pxa.h b/include/linux/platform_data/i2c-pxa.h new file mode 100644 index 000000000000..5236f216dfae --- /dev/null +++ b/include/linux/platform_data/i2c-pxa.h @@ -0,0 +1,74 @@ +/* + * i2c_pxa.h + * + * Copyright (C) 2002 Intrinsyc Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#ifndef _I2C_PXA_H_ +#define _I2C_PXA_H_ + +#if 0 +#define DEF_TIMEOUT 3 +#else +/* need a longer timeout if we're dealing with the fact we may well be + * looking at a multi-master environment +*/ +#define DEF_TIMEOUT 32 +#endif + +#define BUS_ERROR (-EREMOTEIO) +#define XFER_NAKED (-ECONNREFUSED) +#define I2C_RETRY (-2000) /* an error has occurred retry transmit */ + +/* ICR initialize bit values +* +* 15. FM 0 (100 Khz operation) +* 14. UR 0 (No unit reset) +* 13. SADIE 0 (Disables the unit from interrupting on slave addresses +* matching its slave address) +* 12. ALDIE 0 (Disables the unit from interrupt when it loses arbitration +* in master mode) +* 11. SSDIE 0 (Disables interrupts from a slave stop detected, in slave mode) +* 10. BEIE 1 (Enable interrupts from detected bus errors, no ACK sent) +* 9. IRFIE 1 (Enable interrupts from full buffer received) +* 8. ITEIE 1 (Enables the I2C unit to interrupt when transmit buffer empty) +* 7. GCD 1 (Disables i2c unit response to general call messages as a slave) +* 6. IUE 0 (Disable unit until we change settings) +* 5. SCLE 1 (Enables the i2c clock output for master mode (drives SCL) +* 4. MA 0 (Only send stop with the ICR stop bit) +* 3. TB 0 (We are not transmitting a byte initially) +* 2. ACKNAK 0 (Send an ACK after the unit receives a byte) +* 1. STOP 0 (Do not send a STOP) +* 0. START 0 (Do not send a START) +* +*/ +#define I2C_ICR_INIT (ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE) + +/* I2C status register init values + * + * 10. BED 1 (Clear bus error detected) + * 9. SAD 1 (Clear slave address detected) + * 7. IRF 1 (Clear IDBR Receive Full) + * 6. ITE 1 (Clear IDBR Transmit Empty) + * 5. ALD 1 (Clear Arbitration Loss Detected) + * 4. SSD 1 (Clear Slave Stop Detected) + */ +#define I2C_ISR_INIT 0x7FF /* status register init */ + +struct i2c_slave_client; + +struct i2c_pxa_platform_data { + unsigned int slave_addr; + struct i2c_slave_client *slave; + unsigned int class; + unsigned int use_pio :1; + unsigned int fast_mode :1; + unsigned int high_mode:1; + unsigned char master_code; + unsigned long rate; +}; +#endif -- cgit v1.2.3 From 49a0a3d805df3b7b4f8a04db6dbf55aa36fd762c Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 15 Dec 2017 09:41:05 -0800 Subject: bus: ti-sysc: Make omap_hwmod_sysc_fields into sysc_regbits platform data We want to be able to configure hwmod sysc data from ti-sysc driver using platform data callbacks. So let's make struct omap_hwmod_sysc_fields into struct sysc_data and have it available for both ti-sysc driver and hwmod code. Note that we can make it use s8 instead of u8 as the hwmod code uses the feature flags to check for this field. However, for ti-sysc we can use -ENODEV to indicate a feature is not supported in the hardware and can simplify the code that way. And let's add also emufree_shift as the dts files will be describing the hardware for the SYSCONFIG register capbilities mask. Cc: Paul Walmsley Signed-off-by: Tony Lindgren --- include/linux/platform_data/ti-sysc.h | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 include/linux/platform_data/ti-sysc.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h new file mode 100644 index 000000000000..280466099b76 --- /dev/null +++ b/include/linux/platform_data/ti-sysc.h @@ -0,0 +1,29 @@ +#ifndef __TI_SYSC_DATA_H__ +#define __TI_SYSC_DATA_H__ + +/** + * struct sysc_regbits - TI OCP_SYSCONFIG register field offsets + * @midle_shift: Offset of the midle bit + * @clkact_shift: Offset of the clockactivity bit + * @sidle_shift: Offset of the sidle bit + * @enwkup_shift: Offset of the enawakeup bit + * @srst_shift: Offset of the softreset bit + * @autoidle_shift: Offset of the autoidle bit + * @dmadisable_shift: Offset of the dmadisable bit + * @emufree_shift; Offset of the emufree bit + * + * Note that 0 is a valid shift, and for ti-sysc.c -ENODEV can be used if a + * feature is not available. + */ +struct sysc_regbits { + s8 midle_shift; + s8 clkact_shift; + s8 sidle_shift; + s8 enwkup_shift; + s8 srst_shift; + s8 autoidle_shift; + s8 dmadisable_shift; + s8 emufree_shift; +}; + +#endif /* __TI_SYSC_DATA_H__ */ -- cgit v1.2.3 From 70a65240efb1116f4f580c2f8235ba58000889b0 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 15 Dec 2017 09:41:09 -0800 Subject: bus: ti-sysc: Add register bits for interconnect target modules Let's add data for the known interconnect target module types by mapping their register bits. Note that we can handle many quirks for the older omap2 type1 modules directly in the driver without a need for adding custom properties. Signed-off-by: Tony Lindgren --- include/linux/platform_data/ti-sysc.h | 40 +++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h index 280466099b76..b76ace0135b3 100644 --- a/include/linux/platform_data/ti-sysc.h +++ b/include/linux/platform_data/ti-sysc.h @@ -1,6 +1,21 @@ #ifndef __TI_SYSC_DATA_H__ #define __TI_SYSC_DATA_H__ +enum ti_sysc_module_type { + TI_SYSC_OMAP2, + TI_SYSC_OMAP2_TIMER, + TI_SYSC_OMAP3_SHAM, + TI_SYSC_OMAP3_AES, + TI_SYSC_OMAP4, + TI_SYSC_OMAP4_TIMER, + TI_SYSC_OMAP4_SIMPLE, + TI_SYSC_OMAP34XX_SR, + TI_SYSC_OMAP36XX_SR, + TI_SYSC_OMAP4_SR, + TI_SYSC_OMAP4_MCASP, + TI_SYSC_OMAP4_USB_HOST_FS, +}; + /** * struct sysc_regbits - TI OCP_SYSCONFIG register field offsets * @midle_shift: Offset of the midle bit @@ -26,4 +41,29 @@ struct sysc_regbits { s8 emufree_shift; }; +#define SYSC_QUIRK_UNCACHED BIT(1) +#define SYSC_QUIRK_USE_CLOCKACT BIT(0) + +/** + * struct sysc_capabilities - capabilities for an interconnect target module + * + * @sysc_mask: bitmask of supported SYSCONFIG register bits + * @regbits: bitmask of SYSCONFIG register bits + * @mod_quirks: bitmask of module specific quirks + */ +struct sysc_capabilities { + const enum ti_sysc_module_type type; + const u32 sysc_mask; + const struct sysc_regbits *regbits; + const u32 mod_quirks; +}; + +/** + * struct sysc_config - configuration for an interconnect target module + * @quirks: bitmask of enabled quirks + */ +struct sysc_config { + u32 quirks; +}; + #endif /* __TI_SYSC_DATA_H__ */ -- cgit v1.2.3 From a7199e2b91ded41adbb6fd384a85e358d25f48c8 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 15 Dec 2017 09:41:14 -0800 Subject: bus: ti-sysc: Detect i2c interconnect target module based on register layout We can easily detect i2c based on it's non-standard module registers that consist of two 32-bit registers accessed in 16-bit mode. So far we don't have other 16-bit modules, so there's currently no need to add a custom property for 16-bit register access. Signed-off-by: Tony Lindgren --- include/linux/platform_data/ti-sysc.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h index b76ace0135b3..059be6f6fa94 100644 --- a/include/linux/platform_data/ti-sysc.h +++ b/include/linux/platform_data/ti-sysc.h @@ -41,6 +41,7 @@ struct sysc_regbits { s8 emufree_shift; }; +#define SYSC_QUIRK_16BIT BIT(2) #define SYSC_QUIRK_UNCACHED BIT(1) #define SYSC_QUIRK_USE_CLOCKACT BIT(0) -- cgit v1.2.3 From 566a9b05e1fa47dcfb93a4459145d0fdc06d3046 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 15 Dec 2017 09:41:19 -0800 Subject: bus: ti-sysc: Handle module quirks based dts configuration Let's configure few module quirks via device tree using the properties for "ti,no-idle-on-init", "ti,no-reset-on-init" and "ti,sysc-delay-us". Let's also reorder the probe a bit so we have pdata available earlier, and move the PM runtime calls to sysc_init_module() from sysc_read_revision(). Signed-off-by: Tony Lindgren --- include/linux/platform_data/ti-sysc.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h index 059be6f6fa94..28e5a61d4abc 100644 --- a/include/linux/platform_data/ti-sysc.h +++ b/include/linux/platform_data/ti-sysc.h @@ -41,6 +41,10 @@ struct sysc_regbits { s8 emufree_shift; }; +#define SYSC_QUIRK_NO_IDLE_ON_INIT BIT(6) +#define SYSC_QUIRK_NO_RESET_ON_INIT BIT(5) +#define SYSC_QUIRK_OPT_CLKS_NEEDED BIT(4) +#define SYSC_QUIRK_OPT_CLKS_IN_RESET BIT(3) #define SYSC_QUIRK_16BIT BIT(2) #define SYSC_QUIRK_UNCACHED BIT(1) #define SYSC_QUIRK_USE_CLOCKACT BIT(0) @@ -61,9 +65,11 @@ struct sysc_capabilities { /** * struct sysc_config - configuration for an interconnect target module + * @srst_udelay: optional delay needed after OCP soft reset * @quirks: bitmask of enabled quirks */ struct sysc_config { + u8 srst_udelay; u32 quirks; }; -- cgit v1.2.3 From c5a2de97fbd2979fab291fb048084d3fddd322dd Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 15 Dec 2017 09:41:23 -0800 Subject: bus: ti-sysc: Add parsing of module capabilities We need to configure the interconnect target module based on the device three configuration. Let's also add a new quirk for SYSC_QUIRK_RESET_STATUS to indicate that the SYSCONFIG reset bit changes after the reset is done. Signed-off-by: Tony Lindgren --- include/linux/platform_data/ti-sysc.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h index 28e5a61d4abc..1be356330b96 100644 --- a/include/linux/platform_data/ti-sysc.h +++ b/include/linux/platform_data/ti-sysc.h @@ -41,6 +41,7 @@ struct sysc_regbits { s8 emufree_shift; }; +#define SYSC_QUIRK_RESET_STATUS BIT(7) #define SYSC_QUIRK_NO_IDLE_ON_INIT BIT(6) #define SYSC_QUIRK_NO_RESET_ON_INIT BIT(5) #define SYSC_QUIRK_OPT_CLKS_NEEDED BIT(4) @@ -49,6 +50,8 @@ struct sysc_regbits { #define SYSC_QUIRK_UNCACHED BIT(1) #define SYSC_QUIRK_USE_CLOCKACT BIT(0) +#define SYSC_NR_IDLEMODES 4 + /** * struct sysc_capabilities - capabilities for an interconnect target module * @@ -65,10 +68,17 @@ struct sysc_capabilities { /** * struct sysc_config - configuration for an interconnect target module + * @sysc_val: configured value for sysc register + * @midlemodes: bitmask of supported master idle modes + * @sidlemodes: bitmask of supported master idle modes * @srst_udelay: optional delay needed after OCP soft reset * @quirks: bitmask of enabled quirks */ struct sysc_config { + u32 sysc_val; + u32 syss_mask; + u8 midlemodes; + u8 sidlemodes; u8 srst_udelay; u32 quirks; }; -- cgit v1.2.3 From 51279ef9f64cf7eb8b3f891a2b60fa1aa4938afc Mon Sep 17 00:00:00 2001 From: Sergej Sawazki Date: Sat, 16 Sep 2017 13:44:41 +0200 Subject: clk: si5351: Add DT property to enable PLL reset Add optional output clock DT property to enable PLL reset when a clock output is enabled. Cc: Sebastian Hesselbarth Cc: Rabeeh Khoury Cc: Russell King Signed-off-by: Sergej Sawazki Signed-off-by: Stephen Boyd --- include/linux/platform_data/si5351.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/si5351.h b/include/linux/platform_data/si5351.h index 818c5c6e203f..c71a2dd66143 100644 --- a/include/linux/platform_data/si5351.h +++ b/include/linux/platform_data/si5351.h @@ -86,6 +86,7 @@ enum si5351_disable_state { * @multisynth_src: multisynth source clock * @clkout_src: clkout source clock * @pll_master: if true, clkout can also change pll rate + * @pll_reset: if true, clkout can reset its pll * @drive: output drive strength * @rate: initial clkout rate, or default if 0 */ @@ -95,6 +96,7 @@ struct si5351_clkout_config { enum si5351_drive_strength drive; enum si5351_disable_state disable_state; bool pll_master; + bool pll_reset; unsigned long rate; }; -- cgit v1.2.3 From e53537653791b4aaa9ec88a9eb5fd187d44ff6ac Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 20 Dec 2017 13:17:49 +0100 Subject: i2c/ARM: davinci: Deep refactoring of I2C recovery Alter the DaVinci GPIO recovery fetch to use descriptors all the way down into the board files. Signed-off-by: Linus Walleij Acked-by: Sekhar Nori Tested-by: Sekhar Nori Acked-by: Arnd Bergmann Signed-off-by: Wolfram Sang --- include/linux/platform_data/i2c-davinci.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/i2c-davinci.h b/include/linux/platform_data/i2c-davinci.h index 89fd34727a24..98967df07468 100644 --- a/include/linux/platform_data/i2c-davinci.h +++ b/include/linux/platform_data/i2c-davinci.h @@ -16,9 +16,8 @@ struct davinci_i2c_platform_data { unsigned int bus_freq; /* standard bus frequency (kHz) */ unsigned int bus_delay; /* post-transaction delay (usec) */ - unsigned int sda_pin; /* GPIO pin ID to use for SDA */ - unsigned int scl_pin; /* GPIO pin ID to use for SCL */ - bool has_pfunc; /*chip has a ICPFUNC register */ + bool gpio_recovery; /* Use GPIO recovery method */ + bool has_pfunc; /* Chip has a ICPFUNC register */ }; /* for board setup code */ -- cgit v1.2.3 From e32213fbc5432c28268dced0dc8735dcf8532d36 Mon Sep 17 00:00:00 2001 From: Sven Van Asbroeck Date: Fri, 8 Dec 2017 11:28:30 -0500 Subject: eeprom: at24: support eeproms that do not auto-rollover reads Some multi-address eeproms in the at24 family may not automatically roll-over reads to the next slave address. On those eeproms, reads that straddle slave boundaries will not work correctly. Solution: Mark such eeproms with a flag that prevents reads straddling slave boundaries. Add the AT24_FLAG_NO_RDROL flag to the eeprom entry in the device_id table, or add 'no-read-rollover' to the eeprom devicetree entry. Note that I have not personally enountered an at24 chip that does not support read rollovers. They may or may not exist. However, my hardware requires this functionality because of a quirk. Signed-off-by: Sven Van Asbroeck Signed-off-by: Bartosz Golaszewski --- include/linux/platform_data/at24.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/at24.h b/include/linux/platform_data/at24.h index 271a4e25af67..841bb2815a41 100644 --- a/include/linux/platform_data/at24.h +++ b/include/linux/platform_data/at24.h @@ -50,6 +50,8 @@ struct at24_platform_data { #define AT24_FLAG_TAKE8ADDR BIT(4) /* take always 8 addresses (24c00) */ #define AT24_FLAG_SERIAL BIT(3) /* factory-programmed serial number */ #define AT24_FLAG_MAC BIT(2) /* factory-programmed mac address */ +#define AT24_FLAG_NO_RDROL BIT(1) /* does not auto-rollover reads to */ + /* the next slave address */ void (*setup)(struct nvmem_device *nvmem, void *context); void *context; -- cgit v1.2.3 From 98fb3a34736dec1e14e43382c0df30f815560e5f Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Thu, 21 Dec 2017 17:53:09 +0100 Subject: eeprom: at24: fix a whitespace error in platform data Replace spaces with tabs in the definition of AT24_FLAG_NO_RDROL. Fixes: 9d404411091c ("eeprom: at24: support eeproms that do not auto-rollover reads") Signed-off-by: Bartosz Golaszewski --- include/linux/platform_data/at24.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/at24.h b/include/linux/platform_data/at24.h index 841bb2815a41..63507ff464ee 100644 --- a/include/linux/platform_data/at24.h +++ b/include/linux/platform_data/at24.h @@ -50,7 +50,7 @@ struct at24_platform_data { #define AT24_FLAG_TAKE8ADDR BIT(4) /* take always 8 addresses (24c00) */ #define AT24_FLAG_SERIAL BIT(3) /* factory-programmed serial number */ #define AT24_FLAG_MAC BIT(2) /* factory-programmed mac address */ -#define AT24_FLAG_NO_RDROL BIT(1) /* does not auto-rollover reads to */ +#define AT24_FLAG_NO_RDROL BIT(1) /* does not auto-rollover reads to */ /* the next slave address */ void (*setup)(struct nvmem_device *nvmem, void *context); -- cgit v1.2.3 From 78b5d705b51bc175fb67e4f5209f55e5ec581eec Mon Sep 17 00:00:00 2001 From: Andi Shyti Date: Thu, 14 Dec 2017 15:28:27 +0900 Subject: spi: s3c64xx: add SPDX identifier Replace the original license statement with the SPDX identifier. Signed-off-by: Andi Shyti Reviewed-by: Krzysztof Kozlowski Acked-by: Philippe Ombredanne Signed-off-by: Mark Brown --- include/linux/platform_data/spi-s3c64xx.h | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/spi-s3c64xx.h b/include/linux/platform_data/spi-s3c64xx.h index da79774078a7..773daf7915a3 100644 --- a/include/linux/platform_data/spi-s3c64xx.h +++ b/include/linux/platform_data/spi-s3c64xx.h @@ -1,10 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + /* * Copyright (C) 2009 Samsung Electronics Ltd. * Jaswinder Singh - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __SPI_S3C64XX_H -- cgit v1.2.3 From 2514830b8b8ca966fae35103070984c2e847b2b9 Mon Sep 17 00:00:00 2001 From: Ladislav Michl Date: Fri, 12 Jan 2018 14:18:00 +0100 Subject: ARM: OMAP2+: Remove gpmc-onenand As OneNAND driver is now using devicetree gpmc-onenand and its platform data is unused and can be removed. Signed-off-by: Ladislav Michl Reviewed-by: Peter Ujfalusi Acked-by: Roger Quadros Acked-by: Tony Lindgren Tested-by: Tony Lindgren Tested-by: Aaro Koskinen Signed-off-by: Boris Brezillon --- include/linux/platform_data/mtd-onenand-omap2.h | 34 ------------------------- 1 file changed, 34 deletions(-) delete mode 100644 include/linux/platform_data/mtd-onenand-omap2.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/mtd-onenand-omap2.h b/include/linux/platform_data/mtd-onenand-omap2.h deleted file mode 100644 index 56ff0e6f5ad1..000000000000 --- a/include/linux/platform_data/mtd-onenand-omap2.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright (C) 2006 Nokia Corporation - * Author: Juha Yrjola - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __MTD_ONENAND_OMAP2_H -#define __MTD_ONENAND_OMAP2_H - -#include -#include - -#define ONENAND_SYNC_READ (1 << 0) -#define ONENAND_SYNC_READWRITE (1 << 1) -#define ONENAND_IN_OMAP34XX (1 << 2) - -struct omap_onenand_platform_data { - int cs; - int gpio_irq; - struct mtd_partition *parts; - int nr_parts; - int (*onenand_setup)(void __iomem *, int *freq_ptr); - int dma_channel; - u8 flags; - u8 regulator_can_sleep; - u8 skip_initial_unlocking; - - /* for passing the partitions */ - struct device_node *of_node; -}; -#endif -- cgit v1.2.3 From 5b0d0033f3f3a3d09178ef0dcdd0d4e1a08666b8 Mon Sep 17 00:00:00 2001 From: Simon Shields Date: Mon, 22 Jan 2018 17:45:09 -0800 Subject: Input: mms114 - drop platform data and use generic APIs The MMS114 platform data has no in-tree users, so drop it. Switch to using the standard touchscreen properties via touchscreen_parse_properties(), and move the old DT parsing code to use device_property_*() APIs. Finally, use touchscreen_report_pos to report x/y coordinates and drop the custom x/y inversion code. Signed-off-by: Simon Shields Reviewed-by: Rob Herring Reviewed-by: Andi Shyti Tested-by: Andi Shyti Signed-off-by: Dmitry Torokhov --- include/linux/platform_data/mms114.h | 24 ------------------------ 1 file changed, 24 deletions(-) delete mode 100644 include/linux/platform_data/mms114.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/mms114.h b/include/linux/platform_data/mms114.h deleted file mode 100644 index 5722ebfb2738..000000000000 --- a/include/linux/platform_data/mms114.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Copyright (C) 2012 Samsung Electronics Co.Ltd - * Author: Joonyoung Shim - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundationr - */ - -#ifndef __LINUX_MMS114_H -#define __LINUX_MMS114_H - -struct mms114_platform_data { - unsigned int x_size; - unsigned int y_size; - unsigned int contact_threshold; - unsigned int moving_threshold; - bool x_invert; - bool y_invert; - - void (*cfg_pin)(bool); -}; - -#endif /* __LINUX_MMS114_H */ -- cgit v1.2.3 From 1f976f6978bf6156ce822eb279ac86c519b10329 Mon Sep 17 00:00:00 2001 From: Vadim Pasternak Date: Wed, 17 Jan 2018 18:21:53 +0000 Subject: platform/x86: Move Mellanox platform hotplug driver to platform/mellanox In preparation for making the hotplug driver build for different architectures, move mlxcpld-hotplug.c to platform/mellanox and the header to include/linux/platform_data as mlxreg.h to reflect the new interface changes to come. Replace references to CPLD with REG throughout the files, consistent with the new name. Signed-off-by: Vadim Pasternak Acked-by: Andy Shevchenko [dvhart: update copyright, rewrite commit message] Signed-off-by: Darren Hart (VMware) --- include/linux/platform_data/mlxcpld-hotplug.h | 99 --------------------------- include/linux/platform_data/mlxreg.h | 98 ++++++++++++++++++++++++++ 2 files changed, 98 insertions(+), 99 deletions(-) delete mode 100644 include/linux/platform_data/mlxcpld-hotplug.h create mode 100644 include/linux/platform_data/mlxreg.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/mlxcpld-hotplug.h b/include/linux/platform_data/mlxcpld-hotplug.h deleted file mode 100644 index e4cfcffaa6f4..000000000000 --- a/include/linux/platform_data/mlxcpld-hotplug.h +++ /dev/null @@ -1,99 +0,0 @@ -/* - * include/linux/platform_data/mlxcpld-hotplug.h - * Copyright (c) 2016 Mellanox Technologies. All rights reserved. - * Copyright (c) 2016 Vadim Pasternak - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the names of the copyright holders nor the names of its - * contributors may be used to endorse or promote products derived from - * this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef __LINUX_PLATFORM_DATA_MLXCPLD_HOTPLUG_H -#define __LINUX_PLATFORM_DATA_MLXCPLD_HOTPLUG_H - -/** - * struct mlxcpld_hotplug_device - I2C device data: - * @adapter: I2C device adapter; - * @client: I2C device client; - * @brdinfo: device board information; - * @bus: I2C bus, where device is attached; - * - * Structure represents I2C hotplug device static data (board topology) and - * dynamic data (related kernel objects handles). - */ -struct mlxcpld_hotplug_device { - struct i2c_adapter *adapter; - struct i2c_client *client; - struct i2c_board_info brdinfo; - u16 bus; -}; - -/** - * struct mlxcpld_hotplug_platform_data - device platform data: - * @top_aggr_offset: offset of top aggregation interrupt register; - * @top_aggr_mask: top aggregation interrupt common mask; - * @top_aggr_psu_mask: top aggregation interrupt PSU mask; - * @psu_reg_offset: offset of PSU interrupt register; - * @psu_mask: PSU interrupt mask; - * @psu_count: number of equipped replaceable PSUs; - * @psu: pointer to PSU devices data array; - * @top_aggr_pwr_mask: top aggregation interrupt power mask; - * @pwr_reg_offset: offset of power interrupt register - * @pwr_mask: power interrupt mask; - * @pwr_count: number of power sources; - * @pwr: pointer to power devices data array; - * @top_aggr_fan_mask: top aggregation interrupt FAN mask; - * @fan_reg_offset: offset of FAN interrupt register; - * @fan_mask: FAN interrupt mask; - * @fan_count: number of equipped replaceable FANs; - * @fan: pointer to FAN devices data array; - * - * Structure represents board platform data, related to system hotplug events, - * like FAN, PSU, power cable insertion and removing. This data provides the - * number of hot-pluggable devices and hardware description for event handling. - */ -struct mlxcpld_hotplug_platform_data { - u16 top_aggr_offset; - u8 top_aggr_mask; - u8 top_aggr_psu_mask; - u16 psu_reg_offset; - u8 psu_mask; - u8 psu_count; - struct mlxcpld_hotplug_device *psu; - u8 top_aggr_pwr_mask; - u16 pwr_reg_offset; - u8 pwr_mask; - u8 pwr_count; - struct mlxcpld_hotplug_device *pwr; - u8 top_aggr_fan_mask; - u16 fan_reg_offset; - u8 fan_mask; - u8 fan_count; - struct mlxcpld_hotplug_device *fan; -}; - -#endif /* __LINUX_PLATFORM_DATA_MLXCPLD_HOTPLUG_H */ diff --git a/include/linux/platform_data/mlxreg.h b/include/linux/platform_data/mlxreg.h new file mode 100644 index 000000000000..8dcbb8e21ee2 --- /dev/null +++ b/include/linux/platform_data/mlxreg.h @@ -0,0 +1,98 @@ +/* + * Copyright (c) 2017 Mellanox Technologies. All rights reserved. + * Copyright (c) 2017 Vadim Pasternak + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the names of the copyright holders nor the names of its + * contributors may be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __LINUX_PLATFORM_DATA_MLXREG_H +#define __LINUX_PLATFORM_DATA_MLXREG_H + +/** + * struct mlxreg_hotplug_device - I2C device data: + * @adapter: I2C device adapter; + * @client: I2C device client; + * @brdinfo: device board information; + * @bus: I2C bus, where device is attached; + * + * Structure represents I2C hotplug device static data (board topology) and + * dynamic data (related kernel objects handles). + */ +struct mlxreg_hotplug_device { + struct i2c_adapter *adapter; + struct i2c_client *client; + struct i2c_board_info brdinfo; + u16 bus; +}; + +/** + * struct mlxreg_hotplug_platform_data - device platform data: + * @top_aggr_offset: offset of top aggregation interrupt register; + * @top_aggr_mask: top aggregation interrupt common mask; + * @top_aggr_psu_mask: top aggregation interrupt PSU mask; + * @psu_reg_offset: offset of PSU interrupt register; + * @psu_mask: PSU interrupt mask; + * @psu_count: number of equipped replaceable PSUs; + * @psu: pointer to PSU devices data array; + * @top_aggr_pwr_mask: top aggregation interrupt power mask; + * @pwr_reg_offset: offset of power interrupt register + * @pwr_mask: power interrupt mask; + * @pwr_count: number of power sources; + * @pwr: pointer to power devices data array; + * @top_aggr_fan_mask: top aggregation interrupt FAN mask; + * @fan_reg_offset: offset of FAN interrupt register; + * @fan_mask: FAN interrupt mask; + * @fan_count: number of equipped replaceable FANs; + * @fan: pointer to FAN devices data array; + * + * Structure represents board platform data, related to system hotplug events, + * like FAN, PSU, power cable insertion and removing. This data provides the + * number of hot-pluggable devices and hardware description for event handling. + */ +struct mlxreg_hotplug_platform_data { + u16 top_aggr_offset; + u8 top_aggr_mask; + u8 top_aggr_psu_mask; + u16 psu_reg_offset; + u8 psu_mask; + u8 psu_count; + struct mlxreg_hotplug_device *psu; + u8 top_aggr_pwr_mask; + u16 pwr_reg_offset; + u8 pwr_mask; + u8 pwr_count; + struct mlxreg_hotplug_device *pwr; + u8 top_aggr_fan_mask; + u16 fan_reg_offset; + u8 fan_mask; + u8 fan_count; + struct mlxreg_hotplug_device *fan; +}; + +#endif /* __LINUX_PLATFORM_DATA_MLXREG_H */ -- cgit v1.2.3 From 3d838f5514ca5318f46bdb5b3f997cee66091695 Mon Sep 17 00:00:00 2001 From: Vadim Pasternak Date: Mon, 22 Jan 2018 18:43:27 -0800 Subject: platform/mellanox: Rename i2c bus to nr Use Linux convention of nr instead of bus for i2c adapter number. Signed-off-by: Vadim Pasternak Acked-by: Andy Shevchenko [dvhart: refactored commit into smaller functional changes] Signed-off-by: Darren Hart (VMware) --- include/linux/platform_data/mlxreg.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/mlxreg.h b/include/linux/platform_data/mlxreg.h index 8dcbb8e21ee2..ffbcb7886c62 100644 --- a/include/linux/platform_data/mlxreg.h +++ b/include/linux/platform_data/mlxreg.h @@ -39,7 +39,7 @@ * @adapter: I2C device adapter; * @client: I2C device client; * @brdinfo: device board information; - * @bus: I2C bus, where device is attached; + * @nr: I2C device adapter number, to which device is to be attached; * * Structure represents I2C hotplug device static data (board topology) and * dynamic data (related kernel objects handles). @@ -48,7 +48,7 @@ struct mlxreg_hotplug_device { struct i2c_adapter *adapter; struct i2c_client *client; struct i2c_board_info brdinfo; - u16 bus; + int nr; }; /** -- cgit v1.2.3 From c6acad68eb2dbffd0497f91b206de5c362f59ee4 Mon Sep 17 00:00:00 2001 From: Vadim Pasternak Date: Mon, 22 Jan 2018 19:55:11 -0800 Subject: platform/mellanox: mlxreg-hotplug: Modify to use a regmap interface Restructure mlxreg header for unification of hotplug item definitions. Unify hotplug items to allow any kind of item (power controller, fan eeprom, psu eeprom, asic health) in common way. Use a hardware independent regmap interface, enabling the support of hotplug events over programmable devices attached to different bus types, such as I2C, LPC, or SPI. Add a device node to the mlxreg_core_data structure. Signed-off-by: Vadim Pasternak Acked-by: Andy Shevchenko [dvhart: spelling corrections, refactor device node introduction] Signed-off-by: Darren Hart (VMware) --- include/linux/platform_data/mlxreg.h | 126 ++++++++++++++++++++++++----------- 1 file changed, 86 insertions(+), 40 deletions(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/mlxreg.h b/include/linux/platform_data/mlxreg.h index ffbcb7886c62..fcdc707eab99 100644 --- a/include/linux/platform_data/mlxreg.h +++ b/include/linux/platform_data/mlxreg.h @@ -34,8 +34,11 @@ #ifndef __LINUX_PLATFORM_DATA_MLXREG_H #define __LINUX_PLATFORM_DATA_MLXREG_H +#define MLXREG_CORE_LABEL_MAX_SIZE 32 + /** * struct mlxreg_hotplug_device - I2C device data: + * * @adapter: I2C device adapter; * @client: I2C device client; * @brdinfo: device board information; @@ -47,52 +50,95 @@ struct mlxreg_hotplug_device { struct i2c_adapter *adapter; struct i2c_client *client; - struct i2c_board_info brdinfo; + struct i2c_board_info *brdinfo; int nr; }; /** - * struct mlxreg_hotplug_platform_data - device platform data: - * @top_aggr_offset: offset of top aggregation interrupt register; - * @top_aggr_mask: top aggregation interrupt common mask; - * @top_aggr_psu_mask: top aggregation interrupt PSU mask; - * @psu_reg_offset: offset of PSU interrupt register; - * @psu_mask: PSU interrupt mask; - * @psu_count: number of equipped replaceable PSUs; - * @psu: pointer to PSU devices data array; - * @top_aggr_pwr_mask: top aggregation interrupt power mask; - * @pwr_reg_offset: offset of power interrupt register - * @pwr_mask: power interrupt mask; - * @pwr_count: number of power sources; - * @pwr: pointer to power devices data array; - * @top_aggr_fan_mask: top aggregation interrupt FAN mask; - * @fan_reg_offset: offset of FAN interrupt register; - * @fan_mask: FAN interrupt mask; - * @fan_count: number of equipped replaceable FANs; - * @fan: pointer to FAN devices data array; + * struct mlxreg_core_data - attributes control data: + * + * @label: attribute label; + * @label: attribute register offset; + * @reg: attribute register; + * @mask: attribute access mask; + * @mode: access mode; + * @bit: attribute effective bit; + * @np - pointer to node platform associated with attribute; + * @hpdev - hotplug device data; + * @health_cntr: dynamic device health indication counter; + * @attached: true if device has been attached after good health indication; + */ +struct mlxreg_core_data { + char label[MLXREG_CORE_LABEL_MAX_SIZE]; + u32 reg; + u32 mask; + u32 bit; + umode_t mode; + struct device_node *np; + struct mlxreg_hotplug_device hpdev; + u8 health_cntr; + bool attached; +}; + +/** + * struct mlxreg_core_item - same type components controlled by the driver: + * + * @data: component data; + * @aggr_mask: group aggregation mask; + * @reg: group interrupt status register; + * @mask: group interrupt mask; + * @cache: last status value for elements fro the same group; + * @count: number of available elements in the group; + * @ind: element's index inside the group; + * @inversed: if 0: 0 for signal status is OK, if 1 - 1 is OK; + * @health: true if device has health indication, false in other case; + */ +struct mlxreg_core_item { + struct mlxreg_core_data *data; + u32 aggr_mask; + u32 reg; + u32 mask; + u32 cache; + u8 count; + u8 ind; + u8 inversed; + u8 health; +}; + +/** + * struct mlxreg_core_platform_data - platform data: + * + * @led_data: led private data; + * @regmap: register map of parent device; + * @counter: number of led instances; + */ +struct mlxreg_core_platform_data { + struct mlxreg_core_data *data; + void *regmap; + int counter; +}; + +/** + * struct mlxreg_core_hotplug_platform_data - hotplug platform data: * - * Structure represents board platform data, related to system hotplug events, - * like FAN, PSU, power cable insertion and removing. This data provides the - * number of hot-pluggable devices and hardware description for event handling. + * @items: same type components with the hotplug capability; + * @irq: platform interrupt number; + * @regmap: register map of parent device; + * @counter: number of the components with the hotplug capability; + * @cell: location of top aggregation interrupt register; + * @mask: top aggregation interrupt common mask; + * @cell_low: location of low aggregation interrupt register; + * @mask_low: low aggregation interrupt common mask; */ -struct mlxreg_hotplug_platform_data { - u16 top_aggr_offset; - u8 top_aggr_mask; - u8 top_aggr_psu_mask; - u16 psu_reg_offset; - u8 psu_mask; - u8 psu_count; - struct mlxreg_hotplug_device *psu; - u8 top_aggr_pwr_mask; - u16 pwr_reg_offset; - u8 pwr_mask; - u8 pwr_count; - struct mlxreg_hotplug_device *pwr; - u8 top_aggr_fan_mask; - u16 fan_reg_offset; - u8 fan_mask; - u8 fan_count; - struct mlxreg_hotplug_device *fan; +struct mlxreg_core_hotplug_platform_data { + struct mlxreg_core_item *items; + int irq; + void *regmap; + int counter; + u32 cell; + u32 mask; + u32 cell_low; + u32 mask_low; }; #endif /* __LINUX_PLATFORM_DATA_MLXREG_H */ -- cgit v1.2.3