From b6b5e76bb8bb22ecff90a7840dc4845d63328289 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Thu, 23 May 2013 20:14:50 +0200 Subject: ASoC: Add ssm2518 support This patch adds a ASoC CODEC driver for the SSM2516. The SSM2516 is a stereo Class-D audio amplifier with an I2S interface for audio in and a built-in dynamic range control processor. Signed-off-by: Lars-Peter Clausen Signed-off-by: Mark Brown --- include/linux/platform_data/ssm2518.h | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 include/linux/platform_data/ssm2518.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/ssm2518.h b/include/linux/platform_data/ssm2518.h new file mode 100644 index 000000000000..9a8e3ea287e3 --- /dev/null +++ b/include/linux/platform_data/ssm2518.h @@ -0,0 +1,22 @@ +/* + * SSM2518 amplifier audio driver + * + * Copyright 2013 Analog Devices Inc. + * Author: Lars-Peter Clausen + * + * Licensed under the GPL-2. + */ + +#ifndef __LINUX_PLATFORM_DATA_SSM2518_H__ +#define __LINUX_PLATFORM_DATA_SSM2518_H__ + +/** + * struct ssm2518_platform_data - Platform data for the ssm2518 driver + * @enable_gpio: GPIO connected to the nSD pin. Set to -1 if the nSD pin is + * hardwired. + */ +struct ssm2518_platform_data { + int enable_gpio; +}; + +#endif -- cgit v1.2.3 From 1a0483d2a4c2c5e218d415c90d1a62b3b917d34e Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Fri, 3 May 2013 07:33:27 +0200 Subject: clk: si5351: Allow user to define disabled state for every clock output This patch adds platform data and DT bindings to allow to overwrite the stored disabled state for each clock output. Signed-off-by: Marek Belisko Signed-off-by: Sebastian Hesselbarth Signed-off-by: Mike Turquette --- include/linux/platform_data/si5351.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/si5351.h b/include/linux/platform_data/si5351.h index 92dabcaf6499..54334393ab92 100644 --- a/include/linux/platform_data/si5351.h +++ b/include/linux/platform_data/si5351.h @@ -78,6 +78,23 @@ enum si5351_drive_strength { SI5351_DRIVE_8MA = 8, }; +/** + * enum si5351_disable_state - Si5351 clock output disable state + * @SI5351_DISABLE_DEFAULT: default, do not change eeprom config + * @SI5351_DISABLE_LOW: CLKx is set to a LOW state when disabled + * @SI5351_DISABLE_HIGH: CLKx is set to a HIGH state when disabled + * @SI5351_DISABLE_FLOATING: CLKx is set to a FLOATING state when + * disabled + * @SI5351_DISABLE_NEVER: CLKx is NEVER disabled + */ +enum si5351_disable_state { + SI5351_DISABLE_DEFAULT = 0, + SI5351_DISABLE_LOW, + SI5351_DISABLE_HIGH, + SI5351_DISABLE_FLOATING, + SI5351_DISABLE_NEVER, +}; + /** * struct si5351_clkout_config - Si5351 clock output configuration * @clkout: clkout number @@ -91,6 +108,7 @@ struct si5351_clkout_config { enum si5351_multisynth_src multisynth_src; enum si5351_clkout_src clkout_src; enum si5351_drive_strength drive; + enum si5351_disable_state disable_state; bool pll_master; unsigned long rate; }; -- cgit v1.2.3 From c992219825823cad5e11fab3854eb93df2e9ffa1 Mon Sep 17 00:00:00 2001 From: Solomon Peachy Date: Sun, 2 Jun 2013 09:53:01 -0400 Subject: cw1200: move platform_data header to correct location. (As suggested by Arnd Bergmann) Signed-off-by: Solomon Peachy Signed-off-by: John W. Linville --- include/linux/platform_data/cw1200_platform.h | 46 +++++++++++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 include/linux/platform_data/cw1200_platform.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/cw1200_platform.h b/include/linux/platform_data/cw1200_platform.h new file mode 100644 index 000000000000..c168fa512347 --- /dev/null +++ b/include/linux/platform_data/cw1200_platform.h @@ -0,0 +1,46 @@ +/* + * Copyright (C) ST-Ericsson SA 2011 + * + * Author: Dmitry Tarnyagin + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef CW1200_PLAT_H_INCLUDED +#define CW1200_PLAT_H_INCLUDED + +struct cw1200_platform_data_spi { + u8 spi_bits_per_word; /* REQUIRED */ + u16 ref_clk; /* REQUIRED (in KHz) */ + + /* All others are optional */ + bool have_5ghz; + const struct resource *reset; /* GPIO to RSTn signal */ + const struct resource *powerup; /* GPIO to POWERUP signal */ + int (*power_ctrl)(const struct cw1200_platform_data_spi *pdata, + bool enable); /* Control 3v3 / 1v8 supply */ + int (*clk_ctrl)(const struct cw1200_platform_data_spi *pdata, + bool enable); /* Control CLK32K */ + const u8 *macaddr; /* if NULL, use cw1200_mac_template module parameter */ + const char *sdd_file; /* if NULL, will use default for detected hw type */ +}; + +struct cw1200_platform_data_sdio { + u16 ref_clk; /* REQUIRED (in KHz) */ + + /* All others are optional */ + const struct resource *irq; /* if using GPIO for IRQ */ + bool have_5ghz; + bool no_nptb; /* SDIO hardware does not support non-power-of-2-blocksizes */ + const struct resource *reset; /* GPIO to RSTn signal */ + const struct resource *powerup; /* GPIO to POWERUP signal */ + int (*power_ctrl)(const struct cw1200_platform_data_sdio *pdata, + bool enable); /* Control 3v3 / 1v8 supply */ + int (*clk_ctrl)(const struct cw1200_platform_data_sdio *pdata, + bool enable); /* Control CLK32K */ + const u8 *macaddr; /* if NULL, use cw1200_mac_template module parameter */ + const char *sdd_file; /* if NULL, will use default for detected hw type */ +}; + +const void *cw1200_get_platform_data(void); + +#endif /* CW1200_PLAT_H_INCLUDED */ -- cgit v1.2.3 From 6dd64a304eff76ca7dd41bf63df55efa965fa9ec Mon Sep 17 00:00:00 2001 From: Solomon Peachy Date: Sun, 2 Jun 2013 09:53:03 -0400 Subject: cw1200: Replace use of 'struct resource' with 'int' for GPIO fields. The only advantage of 'struct resource' is that it lets us assign names as part of the platform data. Unfortunately since we are using platform data, we are already limited to a single instance of each driver, rendering this moot. So, replace the struct resources with ints, resulting in cleaner code. This was based on a suggestion from Arnd Bergmann. Signed-off-by: Solomon Peachy Signed-off-by: John W. Linville --- include/linux/platform_data/cw1200_platform.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/cw1200_platform.h b/include/linux/platform_data/cw1200_platform.h index c168fa512347..4454c16ea3e5 100644 --- a/include/linux/platform_data/cw1200_platform.h +++ b/include/linux/platform_data/cw1200_platform.h @@ -14,8 +14,8 @@ struct cw1200_platform_data_spi { /* All others are optional */ bool have_5ghz; - const struct resource *reset; /* GPIO to RSTn signal */ - const struct resource *powerup; /* GPIO to POWERUP signal */ + int reset; /* GPIO to RSTn signal (0 disables) */ + int powerup; /* GPIO to POWERUP signal (0 disables) */ int (*power_ctrl)(const struct cw1200_platform_data_spi *pdata, bool enable); /* Control 3v3 / 1v8 supply */ int (*clk_ctrl)(const struct cw1200_platform_data_spi *pdata, @@ -28,11 +28,11 @@ struct cw1200_platform_data_sdio { u16 ref_clk; /* REQUIRED (in KHz) */ /* All others are optional */ - const struct resource *irq; /* if using GPIO for IRQ */ bool have_5ghz; - bool no_nptb; /* SDIO hardware does not support non-power-of-2-blocksizes */ - const struct resource *reset; /* GPIO to RSTn signal */ - const struct resource *powerup; /* GPIO to POWERUP signal */ + bool no_nptb; /* SDIO hardware does not support non-power-of-2-blocksizes */ + int reset; /* GPIO to RSTn signal (0 disables) */ + int powerup; /* GPIO to POWERUP signal (0 disables) */ + int irq; /* IRQ line or 0 to use SDIO IRQ */ int (*power_ctrl)(const struct cw1200_platform_data_sdio *pdata, bool enable); /* Control 3v3 / 1v8 supply */ int (*clk_ctrl)(const struct cw1200_platform_data_sdio *pdata, -- cgit v1.2.3 From 7c0b6f49dbea0b09b1de8aa5c942af9c2ad8b54c Mon Sep 17 00:00:00 2001 From: Solomon Peachy Date: Sun, 2 Jun 2013 11:35:31 -0400 Subject: cw1200: Rework SDIO platform support to prevent build problems. Based on discussions with And Bergmann, this patch changes the SDIO platform code to default to supporting the Sagrad devices, allowing for it to be overridden in board setup code. This renders the cw1200_sagrad module suplerflous, so it is now removed. It also moves the documentation that was in the cw1200_sagrad source to the platform header. Signed-off-by: Solomon Peachy Signed-off-by: John W. Linville --- include/linux/platform_data/cw1200_platform.h | 37 ++++++++++++++++++++++++++- 1 file changed, 36 insertions(+), 1 deletion(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/cw1200_platform.h b/include/linux/platform_data/cw1200_platform.h index 4454c16ea3e5..c6fbc3ce4ab0 100644 --- a/include/linux/platform_data/cw1200_platform.h +++ b/include/linux/platform_data/cw1200_platform.h @@ -41,6 +41,41 @@ struct cw1200_platform_data_sdio { const char *sdd_file; /* if NULL, will use default for detected hw type */ }; -const void *cw1200_get_platform_data(void); + +/* An example of SPI support in your board setup file: + + static struct cw1200_platform_data_spi cw1200_platform_data = { + .ref_clk = 38400, + .spi_bits_per_word = 16, + .reset = GPIO_RF_RESET, + .powerup = GPIO_RF_POWERUP, + .macaddr = wifi_mac_addr, + .sdd_file = "sdd_sagrad_1091_1098.bin", + }; + static struct spi_board_info myboard_spi_devices[] __initdata = { + { + .modalias = "cw1200_wlan_spi", + .max_speed_hz = 52000000, + .bus_num = 0, + .irq = WIFI_IRQ, + .platform_data = &cw1200_platform_data, + .chip_select = 0, + }, + }; + + */ + +/* An example of SDIO support in your board setup file: + + static struct cw1200_platform_data_sdio my_cw1200_platform_data = { + .ref_clk = 38400, + .have_5ghz = false, + .sdd_file = "sdd_myplatform.bin", + }; + cw1200_sdio_set_platform_data(&my_cw1200_platform_data); + + */ + +void __init cw1200_sdio_set_platform_data(struct cw1200_platform_data_sdio *pdata); #endif /* CW1200_PLAT_H_INCLUDED */ -- cgit v1.2.3 From 4da2a54a842db6921289e3e25b0739531a594dea Mon Sep 17 00:00:00 2001 From: Solomon Peachy Date: Sun, 2 Jun 2013 11:35:32 -0400 Subject: cw1200: rename the cw1200 platform definition header My previous patch just moved the file, but it also needed to be renamed to conform to proper conventions. Signed-off-by: Solomon Peachy Signed-off-by: John W. Linville --- include/linux/platform_data/cw1200_platform.h | 81 --------------------------- include/linux/platform_data/net-cw1200.h | 81 +++++++++++++++++++++++++++ 2 files changed, 81 insertions(+), 81 deletions(-) delete mode 100644 include/linux/platform_data/cw1200_platform.h create mode 100644 include/linux/platform_data/net-cw1200.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/cw1200_platform.h b/include/linux/platform_data/cw1200_platform.h deleted file mode 100644 index c6fbc3ce4ab0..000000000000 --- a/include/linux/platform_data/cw1200_platform.h +++ /dev/null @@ -1,81 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2011 - * - * Author: Dmitry Tarnyagin - * License terms: GNU General Public License (GPL) version 2 - */ - -#ifndef CW1200_PLAT_H_INCLUDED -#define CW1200_PLAT_H_INCLUDED - -struct cw1200_platform_data_spi { - u8 spi_bits_per_word; /* REQUIRED */ - u16 ref_clk; /* REQUIRED (in KHz) */ - - /* All others are optional */ - bool have_5ghz; - int reset; /* GPIO to RSTn signal (0 disables) */ - int powerup; /* GPIO to POWERUP signal (0 disables) */ - int (*power_ctrl)(const struct cw1200_platform_data_spi *pdata, - bool enable); /* Control 3v3 / 1v8 supply */ - int (*clk_ctrl)(const struct cw1200_platform_data_spi *pdata, - bool enable); /* Control CLK32K */ - const u8 *macaddr; /* if NULL, use cw1200_mac_template module parameter */ - const char *sdd_file; /* if NULL, will use default for detected hw type */ -}; - -struct cw1200_platform_data_sdio { - u16 ref_clk; /* REQUIRED (in KHz) */ - - /* All others are optional */ - bool have_5ghz; - bool no_nptb; /* SDIO hardware does not support non-power-of-2-blocksizes */ - int reset; /* GPIO to RSTn signal (0 disables) */ - int powerup; /* GPIO to POWERUP signal (0 disables) */ - int irq; /* IRQ line or 0 to use SDIO IRQ */ - int (*power_ctrl)(const struct cw1200_platform_data_sdio *pdata, - bool enable); /* Control 3v3 / 1v8 supply */ - int (*clk_ctrl)(const struct cw1200_platform_data_sdio *pdata, - bool enable); /* Control CLK32K */ - const u8 *macaddr; /* if NULL, use cw1200_mac_template module parameter */ - const char *sdd_file; /* if NULL, will use default for detected hw type */ -}; - - -/* An example of SPI support in your board setup file: - - static struct cw1200_platform_data_spi cw1200_platform_data = { - .ref_clk = 38400, - .spi_bits_per_word = 16, - .reset = GPIO_RF_RESET, - .powerup = GPIO_RF_POWERUP, - .macaddr = wifi_mac_addr, - .sdd_file = "sdd_sagrad_1091_1098.bin", - }; - static struct spi_board_info myboard_spi_devices[] __initdata = { - { - .modalias = "cw1200_wlan_spi", - .max_speed_hz = 52000000, - .bus_num = 0, - .irq = WIFI_IRQ, - .platform_data = &cw1200_platform_data, - .chip_select = 0, - }, - }; - - */ - -/* An example of SDIO support in your board setup file: - - static struct cw1200_platform_data_sdio my_cw1200_platform_data = { - .ref_clk = 38400, - .have_5ghz = false, - .sdd_file = "sdd_myplatform.bin", - }; - cw1200_sdio_set_platform_data(&my_cw1200_platform_data); - - */ - -void __init cw1200_sdio_set_platform_data(struct cw1200_platform_data_sdio *pdata); - -#endif /* CW1200_PLAT_H_INCLUDED */ diff --git a/include/linux/platform_data/net-cw1200.h b/include/linux/platform_data/net-cw1200.h new file mode 100644 index 000000000000..c6fbc3ce4ab0 --- /dev/null +++ b/include/linux/platform_data/net-cw1200.h @@ -0,0 +1,81 @@ +/* + * Copyright (C) ST-Ericsson SA 2011 + * + * Author: Dmitry Tarnyagin + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef CW1200_PLAT_H_INCLUDED +#define CW1200_PLAT_H_INCLUDED + +struct cw1200_platform_data_spi { + u8 spi_bits_per_word; /* REQUIRED */ + u16 ref_clk; /* REQUIRED (in KHz) */ + + /* All others are optional */ + bool have_5ghz; + int reset; /* GPIO to RSTn signal (0 disables) */ + int powerup; /* GPIO to POWERUP signal (0 disables) */ + int (*power_ctrl)(const struct cw1200_platform_data_spi *pdata, + bool enable); /* Control 3v3 / 1v8 supply */ + int (*clk_ctrl)(const struct cw1200_platform_data_spi *pdata, + bool enable); /* Control CLK32K */ + const u8 *macaddr; /* if NULL, use cw1200_mac_template module parameter */ + const char *sdd_file; /* if NULL, will use default for detected hw type */ +}; + +struct cw1200_platform_data_sdio { + u16 ref_clk; /* REQUIRED (in KHz) */ + + /* All others are optional */ + bool have_5ghz; + bool no_nptb; /* SDIO hardware does not support non-power-of-2-blocksizes */ + int reset; /* GPIO to RSTn signal (0 disables) */ + int powerup; /* GPIO to POWERUP signal (0 disables) */ + int irq; /* IRQ line or 0 to use SDIO IRQ */ + int (*power_ctrl)(const struct cw1200_platform_data_sdio *pdata, + bool enable); /* Control 3v3 / 1v8 supply */ + int (*clk_ctrl)(const struct cw1200_platform_data_sdio *pdata, + bool enable); /* Control CLK32K */ + const u8 *macaddr; /* if NULL, use cw1200_mac_template module parameter */ + const char *sdd_file; /* if NULL, will use default for detected hw type */ +}; + + +/* An example of SPI support in your board setup file: + + static struct cw1200_platform_data_spi cw1200_platform_data = { + .ref_clk = 38400, + .spi_bits_per_word = 16, + .reset = GPIO_RF_RESET, + .powerup = GPIO_RF_POWERUP, + .macaddr = wifi_mac_addr, + .sdd_file = "sdd_sagrad_1091_1098.bin", + }; + static struct spi_board_info myboard_spi_devices[] __initdata = { + { + .modalias = "cw1200_wlan_spi", + .max_speed_hz = 52000000, + .bus_num = 0, + .irq = WIFI_IRQ, + .platform_data = &cw1200_platform_data, + .chip_select = 0, + }, + }; + + */ + +/* An example of SDIO support in your board setup file: + + static struct cw1200_platform_data_sdio my_cw1200_platform_data = { + .ref_clk = 38400, + .have_5ghz = false, + .sdd_file = "sdd_myplatform.bin", + }; + cw1200_sdio_set_platform_data(&my_cw1200_platform_data); + + */ + +void __init cw1200_sdio_set_platform_data(struct cw1200_platform_data_sdio *pdata); + +#endif /* CW1200_PLAT_H_INCLUDED */ -- cgit v1.2.3 From 1237e598a94b5a44a0162a4f4534d18ef8a81a7d Mon Sep 17 00:00:00 2001 From: Philippe Begnic Date: Mon, 27 May 2013 14:41:29 +0200 Subject: clk: ux500: Pass clock base adresses in initcall for u8540 and u9540 Align on u8500 version, pass clock base address in clk_init functions for u8540 and u9540. Signed-off-by: Linus Walleij Signed-off-by: Philippe Begnic Reviewed-by: Ulf Hansson Signed-off-by: Mike Turquette --- include/linux/platform_data/clk-ux500.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/clk-ux500.h b/include/linux/platform_data/clk-ux500.h index 320d9c39ea0a..9d98f3aaa16c 100644 --- a/include/linux/platform_data/clk-ux500.h +++ b/include/linux/platform_data/clk-ux500.h @@ -12,7 +12,9 @@ void u8500_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base, u32 clkrst5_base, u32 clkrst6_base); -void u9540_clk_init(void); -void u8540_clk_init(void); +void u9540_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base, + u32 clkrst5_base, u32 clkrst6_base); +void u8540_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base, + u32 clkrst5_base, u32 clkrst6_base); #endif /* __CLK_UX500_H */ -- cgit v1.2.3 From a3e509bb328287beba05017037e505bc53b62724 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 21 May 2013 18:49:58 +0200 Subject: input: mfd: ti_am335x_tsc remove remaining platform data pieces The two header files removed here are unused and have no users as this platform was never used with platform devices. Signed-off-by: Sebastian Andrzej Siewior --- include/linux/platform_data/ti_am335x_adc.h | 14 -------------- 1 file changed, 14 deletions(-) delete mode 100644 include/linux/platform_data/ti_am335x_adc.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/ti_am335x_adc.h b/include/linux/platform_data/ti_am335x_adc.h deleted file mode 100644 index e41d5834cb84..000000000000 --- a/include/linux/platform_data/ti_am335x_adc.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef __LINUX_TI_AM335X_ADC_H -#define __LINUX_TI_AM335X_ADC_H - -/** - * struct adc_data ADC Input information - * @adc_channels: Number of analog inputs - * available for ADC. - */ - -struct adc_data { - unsigned int adc_channels; -}; - -#endif -- cgit v1.2.3 From 0a085a9482fa51efb58c9d351ea98e83c5df93fc Mon Sep 17 00:00:00 2001 From: Chao Xie Date: Sun, 5 May 2013 20:24:58 -0700 Subject: Input: pxa27x-keypad - use matrix_keymap for matrix keys pxa27x-keypad includes matrix keys. Make use of matrix_keymap for the matrix keys. Signed-off-by: Chao Xie Signed-off-by: Dmitry Torokhov --- include/linux/platform_data/keypad-pxa27x.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/keypad-pxa27x.h b/include/linux/platform_data/keypad-pxa27x.h index 5ce8d5e6ea51..24625569d16d 100644 --- a/include/linux/platform_data/keypad-pxa27x.h +++ b/include/linux/platform_data/keypad-pxa27x.h @@ -36,10 +36,9 @@ struct pxa27x_keypad_platform_data { /* code map for the matrix keys */ + const struct matrix_keymap_data *matrix_keymap_data; unsigned int matrix_key_rows; unsigned int matrix_key_cols; - unsigned int *matrix_key_map; - int matrix_key_map_size; /* direct keys */ int direct_key_num; -- cgit v1.2.3 From 99b82abb0a35b07310ea6334257829af168c8e08 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Thu, 13 Jun 2013 18:54:44 +0200 Subject: pwm: Add Renesas TPU PWM driver The Timer Pulse Unit (TPU) is a 4-channels 16-bit timer used to generate waveforms. This driver exposes PWM functions through the PWM API for other drivers to use. The code is loosely based on the leds-renesas-tpu driver by Magnus Damm and the TPU PWM driver shipped in the Armadillo EVA 800 kernel sources. Signed-off-by: Laurent Pinchart Signed-off-by: Axel Lin Tested-by: Simon Horman Signed-off-by: Thierry Reding --- include/linux/platform_data/pwm-renesas-tpu.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) create mode 100644 include/linux/platform_data/pwm-renesas-tpu.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/pwm-renesas-tpu.h b/include/linux/platform_data/pwm-renesas-tpu.h new file mode 100644 index 000000000000..a7220b10ddab --- /dev/null +++ b/include/linux/platform_data/pwm-renesas-tpu.h @@ -0,0 +1,16 @@ +#ifndef __PWM_RENESAS_TPU_H__ +#define __PWM_RENESAS_TPU_H__ + +#include + +#define TPU_CHANNEL_MAX 4 + +struct tpu_pwm_channel_data { + enum pwm_polarity polarity; +}; + +struct tpu_pwm_platform_data { + struct tpu_pwm_channel_data channels[TPU_CHANNEL_MAX]; +}; + +#endif /* __PWM_RENESAS_TPU_H__ */ -- cgit v1.2.3 From 4bf8e1962f91eed5dbee168d2348983dda0a518f Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 19 Jun 2013 13:54:11 +0200 Subject: drm: Renesas R-Car Display Unit DRM driver The R-Car Display Unit (DU) DRM driver supports both superposition processors and all eight planes in RGB and YUV formats with alpha blending. Only VGA and LVDS encoders and connectors are currently supported. Signed-off-by: Laurent Pinchart Signed-off-by: Dave Airlie --- include/linux/platform_data/rcar-du.h | 54 +++++++++++++++++++++++++++++++++++ 1 file changed, 54 insertions(+) create mode 100644 include/linux/platform_data/rcar-du.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/rcar-du.h b/include/linux/platform_data/rcar-du.h new file mode 100644 index 000000000000..80587fdbba3e --- /dev/null +++ b/include/linux/platform_data/rcar-du.h @@ -0,0 +1,54 @@ +/* + * rcar_du.h -- R-Car Display Unit DRM driver + * + * Copyright (C) 2013 Renesas Corporation + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __RCAR_DU_H__ +#define __RCAR_DU_H__ + +#include + +enum rcar_du_encoder_type { + RCAR_DU_ENCODER_UNUSED = 0, + RCAR_DU_ENCODER_VGA, + RCAR_DU_ENCODER_LVDS, +}; + +struct rcar_du_panel_data { + unsigned int width_mm; /* Panel width in mm */ + unsigned int height_mm; /* Panel height in mm */ + struct drm_mode_modeinfo mode; +}; + +struct rcar_du_encoder_lvds_data { + struct rcar_du_panel_data panel; +}; + +struct rcar_du_encoder_vga_data { + /* TODO: Add DDC information for EDID retrieval */ +}; + +struct rcar_du_encoder_data { + enum rcar_du_encoder_type encoder; + unsigned int output; + + union { + struct rcar_du_encoder_lvds_data lvds; + struct rcar_du_encoder_vga_data vga; + } u; +}; + +struct rcar_du_platform_data { + struct rcar_du_encoder_data *encoders; + unsigned int num_encoders; +}; + +#endif /* __RCAR_DU_H__ */ -- cgit v1.2.3 From 0ddf03c95bbb4f4ed57281fa7b781472950df749 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Wed, 5 Jun 2013 15:13:26 +0200 Subject: mmc: esdhc-imx: parse max-frequency from devicetree In order to make it possible to reduce the SD bus frequency, parse the optional "max-frequency" attribute as documented in devicetree/bindings/mmc/mmc.txt Signed-off-by: Lucas Stach Acked-by: Shawn Guo Signed-off-by: Chris Ball --- include/linux/platform_data/mmc-esdhc-imx.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/mmc-esdhc-imx.h b/include/linux/platform_data/mmc-esdhc-imx.h index b4a0521ce411..d44912d81578 100644 --- a/include/linux/platform_data/mmc-esdhc-imx.h +++ b/include/linux/platform_data/mmc-esdhc-imx.h @@ -40,5 +40,6 @@ struct esdhc_platform_data { enum wp_types wp_type; enum cd_types cd_type; int max_bus_width; + unsigned int f_max; }; #endif /* __ASM_ARCH_IMX_ESDHC_H */ -- cgit v1.2.3 From 594fbe713bf60073ed884dc317a74dd5b327aba7 Mon Sep 17 00:00:00 2001 From: Arnaud Ebalard Date: Thu, 20 Jun 2013 22:21:04 +0200 Subject: Add support for GMT G762/G763 PWM fan controllers GMT G762/763 fan speed PWM controller is connected directly to a fan and performs closed-loop or open-loop control of the fan speed. Two modes - PWM or DC - are supported by the chip. Introduced driver provides various knobs to control the operations of the chip (via sysfs interface). Specific characteristics of the system can be passed either using board init code or via DT. Documentation for both the driver and DT bindings are also provided. Signed-off-by: Arnaud Ebalard Tested-by: Simon Guinot Signed-off-by: Guenter Roeck --- include/linux/platform_data/g762.h | 37 +++++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) create mode 100644 include/linux/platform_data/g762.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/g762.h b/include/linux/platform_data/g762.h new file mode 100644 index 000000000000..d3c51283764d --- /dev/null +++ b/include/linux/platform_data/g762.h @@ -0,0 +1,37 @@ +/* + * Platform data structure for g762 fan controller driver + * + * Copyright (C) 2013, Arnaud EBALARD + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __LINUX_PLATFORM_DATA_G762_H__ +#define __LINUX_PLATFORM_DATA_G762_H__ + +/* + * Following structure can be used to set g762 driver platform specific data + * during board init. Note that passing a sparse structure is possible but + * will result in non-specified attributes to be set to default value, hence + * overloading those installed during boot (e.g. by u-boot). + */ + +struct g762_platform_data { + u32 fan_startv; + u32 fan_gear_mode; + u32 pwm_polarity; + u32 clk_freq; +}; + +#endif /* __LINUX_PLATFORM_DATA_G762_H__ */ -- cgit v1.2.3 From 3b81a6809480f3fc7d9d06562704c8df18ecec00 Mon Sep 17 00:00:00 2001 From: Franky Lin Date: Wed, 26 Jun 2013 14:20:18 +0200 Subject: brcmfmac: add broken scatter-gather DMA support DMA engine of some old SDIO host controllers require block size alignment for data length of each scatterlist item. This patch introduces an intermediate buffer list to support this kind of platform. It decreases the throughput because of an extra memcpy in critical data path. So don't turn this on unless it's necessary. Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Arend van Spriel Signed-off-by: Franky Lin Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- include/linux/platform_data/brcmfmac-sdio.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/brcmfmac-sdio.h b/include/linux/platform_data/brcmfmac-sdio.h index 1ade657d5fc1..b7174998c24a 100644 --- a/include/linux/platform_data/brcmfmac-sdio.h +++ b/include/linux/platform_data/brcmfmac-sdio.h @@ -90,6 +90,10 @@ void __init brcmfmac_init_pdata(void) * oob_irq_nr, oob_irq_flags: the OOB interrupt information. The values are * used for registering the irq using request_irq function. * + * broken_sg_support: flag for broken sg list support of SDIO host controller. + * Set this to true if the SDIO host controller has higher align requirement + * than 32 bytes for each scatterlist item. + * * power_on: This function is called by the brcmfmac when the module gets * loaded. This can be particularly useful for low power devices. The platform * spcific routine may for example decide to power up the complete device. @@ -116,6 +120,7 @@ struct brcmfmac_sdio_platform_data { bool oob_irq_supported; unsigned int oob_irq_nr; unsigned long oob_irq_flags; + bool broken_sg_support; void (*power_on)(void); void (*power_off)(void); void (*reset)(void); -- cgit v1.2.3 From 17fb1563d69b63fe7a79570fe870cf7e530cd2cd Mon Sep 17 00:00:00 2001 From: Ferruh Yigit Date: Sun, 30 Jun 2013 18:49:02 -0700 Subject: Input: cyttsp4 - add core driver for Cypress TMA4XX touchscreen devices Cypress TrueTouch(tm) Standard Product controllers, Generetion4 devices, Core driver. Core driver is interface between host and TTSP controller and processes data sent by controller. Responsibilities of module are IRQ handling, reading system information registers and sending multi-touch protocol type B events. Signed-off-by: Ferruh Yigit Acked-by: Greg Kroah-Hartman Acked-by: Javier Martinez Canillas Signed-off-by: Dmitry Torokhov --- include/linux/platform_data/cyttsp4.h | 76 +++++++++++++++++++++++++++++++++++ 1 file changed, 76 insertions(+) create mode 100644 include/linux/platform_data/cyttsp4.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/cyttsp4.h b/include/linux/platform_data/cyttsp4.h new file mode 100644 index 000000000000..6eba54aff1dc --- /dev/null +++ b/include/linux/platform_data/cyttsp4.h @@ -0,0 +1,76 @@ +/* + * Header file for: + * Cypress TrueTouch(TM) Standard Product (TTSP) touchscreen drivers. + * For use with Cypress Txx3xx parts. + * Supported parts include: + * CY8CTST341 + * CY8CTMA340 + * + * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc. + * Copyright (C) 2012 Javier Martinez Canillas + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2, and only version 2, as published by the + * Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Contact Cypress Semiconductor at www.cypress.com (kev@cypress.com) + * + */ +#ifndef _CYTTSP4_H_ +#define _CYTTSP4_H_ + +#define CYTTSP4_MT_NAME "cyttsp4_mt" +#define CYTTSP4_I2C_NAME "cyttsp4_i2c_adapter" +#define CYTTSP4_SPI_NAME "cyttsp4_spi_adapter" + +#define CY_TOUCH_SETTINGS_MAX 32 + +struct touch_framework { + const uint16_t *abs; + uint8_t size; + uint8_t enable_vkeys; +} __packed; + +struct cyttsp4_mt_platform_data { + struct touch_framework *frmwrk; + unsigned short flags; + char const *inp_dev_name; +}; + +struct touch_settings { + const uint8_t *data; + uint32_t size; + uint8_t tag; +} __packed; + +struct cyttsp4_core_platform_data { + int irq_gpio; + int rst_gpio; + int level_irq_udelay; + int (*xres)(struct cyttsp4_core_platform_data *pdata, + struct device *dev); + int (*init)(struct cyttsp4_core_platform_data *pdata, + int on, struct device *dev); + int (*power)(struct cyttsp4_core_platform_data *pdata, + int on, struct device *dev, atomic_t *ignore_irq); + int (*irq_stat)(struct cyttsp4_core_platform_data *pdata, + struct device *dev); + struct touch_settings *sett[CY_TOUCH_SETTINGS_MAX]; +}; + +struct cyttsp4_platform_data { + struct cyttsp4_core_platform_data *core_pdata; + struct cyttsp4_mt_platform_data *mt_pdata; +}; + +#endif /* _CYTTSP4_H_ */ -- cgit v1.2.3 From e4760363ea14b7b707ba68ab780c8ecf98a84c15 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Mon, 1 Jul 2013 15:30:51 +0300 Subject: remoteproc/omap: fix a sparse warning This patch fixes a sparse warning in the omap remoteproc code when OMAP_REMOTEPROC is disabled. include/linux/platform_data/remoteproc-omap.h:76:13: warning: symbol 'omap_rproc_reserve_cma' was not declared. Should it be static? Signed-off-by: Suman Anna Signed-off-by: Ohad Ben-Cohen --- include/linux/platform_data/remoteproc-omap.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/remoteproc-omap.h b/include/linux/platform_data/remoteproc-omap.h index 3c1c6444ec4b..bfbd12b41162 100644 --- a/include/linux/platform_data/remoteproc-omap.h +++ b/include/linux/platform_data/remoteproc-omap.h @@ -50,7 +50,7 @@ void __init omap_rproc_reserve_cma(void); #else -void __init omap_rproc_reserve_cma(void) +static inline void __init omap_rproc_reserve_cma(void) { } -- cgit v1.2.3 From 290ad0f9d954b445788bf26652b239c59cec2060 Mon Sep 17 00:00:00 2001 From: Markus Pargmann Date: Sun, 26 May 2013 11:53:20 +0200 Subject: dma: imx-dma: Add oftree support Adding devicetree support for imx-dma driver. Use driver name for function 'imx_dma_is_general_purpose' because the devicename for devicetree initialized devices is different. Signed-off-by: Markus Pargmann Reviewed-by: Arnd Bergmann Reviewed-by: Shawn Guo Acked-by: Sascha Hauer Signed-off-by: Vinod Koul --- include/linux/platform_data/dma-imx.h | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/dma-imx.h b/include/linux/platform_data/dma-imx.h index f6d30cc1cb77..beac6b8b6a7b 100644 --- a/include/linux/platform_data/dma-imx.h +++ b/include/linux/platform_data/dma-imx.h @@ -60,10 +60,8 @@ static inline int imx_dma_is_ipu(struct dma_chan *chan) static inline int imx_dma_is_general_purpose(struct dma_chan *chan) { - return strstr(dev_name(chan->device->dev), "sdma") || - !strcmp(dev_name(chan->device->dev), "imx1-dma") || - !strcmp(dev_name(chan->device->dev), "imx21-dma") || - !strcmp(dev_name(chan->device->dev), "imx27-dma"); + return !strcmp(chan->device->dev->driver->name, "imx-sdma") || + !strcmp(chan->device->dev->driver->name, "imx-dma"); } #endif -- cgit v1.2.3 From 72ae6e4b31e40397eaa81007b39a1074638a6798 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Fri, 10 May 2013 15:19:14 +0200 Subject: dmaengine: at_hdmac: extend hardware handshaking interface identification Peripheral handshaking identification numbers can be bigger than 15, so new fields have been created in the CFG register. Add macros to take this modification into account and use them in at_dma_xlate() function. Signed-off-by: Nicolas Ferre Acked-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Vinod Koul --- include/linux/platform_data/dma-atmel.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/dma-atmel.h b/include/linux/platform_data/dma-atmel.h index cab0997be3de..e95f19c65873 100644 --- a/include/linux/platform_data/dma-atmel.h +++ b/include/linux/platform_data/dma-atmel.h @@ -35,16 +35,20 @@ struct at_dma_slave { /* Platform-configurable bits in CFG */ +#define ATC_PER_MSB(h) ((0x30U & (h)) >> 4) /* Extract most significant bits of a handshaking identifier */ + #define ATC_SRC_PER(h) (0xFU & (h)) /* Channel src rq associated with periph handshaking ifc h */ #define ATC_DST_PER(h) ((0xFU & (h)) << 4) /* Channel dst rq associated with periph handshaking ifc h */ #define ATC_SRC_REP (0x1 << 8) /* Source Replay Mod */ #define ATC_SRC_H2SEL (0x1 << 9) /* Source Handshaking Mod */ #define ATC_SRC_H2SEL_SW (0x0 << 9) #define ATC_SRC_H2SEL_HW (0x1 << 9) +#define ATC_SRC_PER_MSB(h) (ATC_PER_MSB(h) << 10) /* Channel src rq (most significant bits) */ #define ATC_DST_REP (0x1 << 12) /* Destination Replay Mod */ #define ATC_DST_H2SEL (0x1 << 13) /* Destination Handshaking Mod */ #define ATC_DST_H2SEL_SW (0x0 << 13) #define ATC_DST_H2SEL_HW (0x1 << 13) +#define ATC_DST_PER_MSB(h) (ATC_PER_MSB(h) << 14) /* Channel dst rq (most significant bits) */ #define ATC_SOD (0x1 << 16) /* Stop On Done */ #define ATC_LOCK_IF (0x1 << 20) /* Interface Lock */ #define ATC_LOCK_B (0x1 << 21) /* AHB Bus Lock */ -- cgit v1.2.3