From 98a175b60f46a80dfa44fb0e0807f2e5a351f35f Mon Sep 17 00:00:00 2001 From: Yadwinder Singh Brar Date: Sat, 9 Jun 2012 16:40:38 +0530 Subject: regulator: core: Add regulator_set_voltage_time_sel to calculate ramp delay. This patch adds regulator_set_voltage_time_sel(), to move into core, the commonly used code by drivers to provide the .set_voltage_time_sel callback. It will also allow us to configure different ramp delay for different regulators easily. Signed-off-by: Yadwinder Singh Brar Signed-off-by: Mark Brown --- include/linux/regulator/driver.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux/regulator') diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 80226383e561..ae5c25379237 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -170,6 +170,7 @@ enum regulator_type { * * @min_uV: Voltage given by the lowest selector (if linear mapping) * @uV_step: Voltage increase with each selector (if linear mapping) + * @ramp_delay: Time to settle down after voltage change (unit: mV/us) * @volt_table: Voltage mapping table (if table based mapping) * * @vsel_reg: Register for selector when using regulator_regmap_X_voltage_ @@ -189,6 +190,7 @@ struct regulator_desc { unsigned int min_uV; unsigned int uV_step; + unsigned int ramp_delay; const unsigned int *volt_table; @@ -285,6 +287,9 @@ int regulator_set_voltage_sel_regmap(struct regulator_dev *rdev, unsigned sel); int regulator_is_enabled_regmap(struct regulator_dev *rdev); int regulator_enable_regmap(struct regulator_dev *rdev); int regulator_disable_regmap(struct regulator_dev *rdev); +int regulator_set_voltage_time_sel(struct regulator_dev *rdev, + unsigned int old_selector, + unsigned int new_selector); void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data); -- cgit v1.2.3 From 6f0b2c696ca340cc2da381fe693fda3f8fdb2149 Mon Sep 17 00:00:00 2001 From: Yadwinder Singh Brar Date: Mon, 11 Jun 2012 17:41:08 +0530 Subject: regulator: Add ramp_delay configuration to constraints For some hardwares ramp_delay for BUCKs is a configurable parameter which can be configured through DT or board file.This patch adds ramp_delay to regulator constraints and allow user to configure it for regulators which supports this feature, through DT or board file. It will provide two ways of setting the ramp_delay for a regulator: First, by setting it as constraints in board file(for configurable regulators) and set_machine_constraints() will take care of setting it on hardware by calling(the provided) .set_ramp_delay() operation(callback). Second, by setting it as data in regulator_desc(as fixed/default ramp_delay rate) for a regulator in driver. regulator_set_voltage_time_sel() will give preference to constraints->ramp_delay while reading ramp_delay rate for regulator. Similarly users should also take care accordingly while refering ramp_delay rate(in case of implementing their private .set_voltage_time_sel() callbacks for different regulators). [Rewrote subject for 80 columns -- broonie] Signed-off-by: Yadwinder Singh Brar Signed-off-by: Mark Brown --- include/linux/regulator/driver.h | 3 +++ include/linux/regulator/machine.h | 3 +++ 2 files changed, 6 insertions(+) (limited to 'include/linux/regulator') diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index ae5c25379237..ddc155d262da 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -67,6 +67,8 @@ enum regulator_status { * * @enable_time: Time taken for the regulator voltage output voltage to * stabilise after being enabled, in microseconds. + * @set_ramp_delay: Set the ramp delay for the regulator. The driver should + * select ramp delay equal to or less than(closest) ramp_delay. * @set_voltage_time_sel: Time taken for the regulator voltage output voltage * to stabilise after being set to a new value, in microseconds. * The function provides the from and to voltage selector, the @@ -113,6 +115,7 @@ struct regulator_ops { /* Time taken to enable or set voltage on the regulator */ int (*enable_time) (struct regulator_dev *); + int (*set_ramp_delay) (struct regulator_dev *, int ramp_delay); int (*set_voltage_time_sel) (struct regulator_dev *, unsigned int old_selector, unsigned int new_selector); diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index b02108446be7..5f37ad3cc172 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -92,6 +92,7 @@ struct regulator_state { * mode. * @initial_state: Suspend state to set by default. * @initial_mode: Mode to set at startup. + * @ramp_delay: Time to settle down after voltage change (unit: mV/us) */ struct regulation_constraints { @@ -125,6 +126,8 @@ struct regulation_constraints { /* mode to set on startup */ unsigned int initial_mode; + unsigned int ramp_delay; + /* constraint flags */ unsigned always_on:1; /* regulator never off when system is on */ unsigned boot_on:1; /* bootloader/firmware enabled regulator */ -- cgit v1.2.3 From ea38d13fd1666bc030cb1c0feec5b0da2f89f9b2 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 18 Jun 2012 14:03:16 +0800 Subject: regulator: core: Change the unit of ramp_delay from mV/uS to uV/uS This change makes it possible to set ramp_delay with 0.xxx mV/uS without truncation issue. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- include/linux/regulator/driver.h | 2 +- include/linux/regulator/machine.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux/regulator') diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index ddc155d262da..84f999ed394b 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -173,7 +173,7 @@ enum regulator_type { * * @min_uV: Voltage given by the lowest selector (if linear mapping) * @uV_step: Voltage increase with each selector (if linear mapping) - * @ramp_delay: Time to settle down after voltage change (unit: mV/us) + * @ramp_delay: Time to settle down after voltage change (unit: uV/us) * @volt_table: Voltage mapping table (if table based mapping) * * @vsel_reg: Register for selector when using regulator_regmap_X_voltage_ diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index 5f37ad3cc172..40dd0a394cfa 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -92,7 +92,7 @@ struct regulator_state { * mode. * @initial_state: Suspend state to set by default. * @initial_mode: Mode to set at startup. - * @ramp_delay: Time to settle down after voltage change (unit: mV/us) + * @ramp_delay: Time to settle down after voltage change (unit: uV/us) */ struct regulation_constraints { -- cgit v1.2.3 From af8b5fc31099abd7f3b297332c9e280ec0b30a71 Mon Sep 17 00:00:00 2001 From: "Kim, Milo" Date: Tue, 19 Jun 2012 07:08:22 +0000 Subject: regulator: add new regulator driver for lp872x This driver supports TI/National LP8720, LP8725 PMIC. Signed-off-by: Milo(Woogyom) Kim Reviewed-by: Axel Lin Signed-off-by: Mark Brown --- include/linux/regulator/lp872x.h | 90 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 90 insertions(+) create mode 100644 include/linux/regulator/lp872x.h (limited to 'include/linux/regulator') diff --git a/include/linux/regulator/lp872x.h b/include/linux/regulator/lp872x.h new file mode 100644 index 000000000000..132e05c46661 --- /dev/null +++ b/include/linux/regulator/lp872x.h @@ -0,0 +1,90 @@ +/* + * Copyright 2012 Texas Instruments + * + * Author: Milo(Woogyom) Kim + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __LP872X_REGULATOR_H__ +#define __LP872X_REGULATOR_H__ + +#include +#include +#include + +#define LP872X_MAX_REGULATORS 9 + +enum lp872x_regulator_id { + LP8720_ID_BASE, + LP8720_ID_LDO1 = LP8720_ID_BASE, + LP8720_ID_LDO2, + LP8720_ID_LDO3, + LP8720_ID_LDO4, + LP8720_ID_LDO5, + LP8720_ID_BUCK, + + LP8725_ID_BASE, + LP8725_ID_LDO1 = LP8725_ID_BASE, + LP8725_ID_LDO2, + LP8725_ID_LDO3, + LP8725_ID_LDO4, + LP8725_ID_LDO5, + LP8725_ID_LILO1, + LP8725_ID_LILO2, + LP8725_ID_BUCK1, + LP8725_ID_BUCK2, + + LP872X_ID_MAX, +}; + +enum lp872x_dvs_state { + DVS_LOW = GPIOF_OUT_INIT_LOW, + DVS_HIGH = GPIOF_OUT_INIT_HIGH, +}; + +enum lp872x_dvs_sel { + SEL_V1, + SEL_V2, +}; + +/** + * lp872x_dvs + * @gpio : gpio pin number for dvs control + * @vsel : dvs selector for buck v1 or buck v2 register + * @init_state : initial dvs pin state + */ +struct lp872x_dvs { + int gpio; + enum lp872x_dvs_sel vsel; + enum lp872x_dvs_state init_state; +}; + +/** + * lp872x_regdata + * @id : regulator id + * @init_data : init data for each regulator + */ +struct lp872x_regulator_data { + enum lp872x_regulator_id id; + struct regulator_init_data *init_data; +}; + +/** + * lp872x_platform_data + * @general_config : the value of LP872X_GENERAL_CFG register + * @update_config : if LP872X_GENERAL_CFG register is updated, set true + * @regulator_data : platform regulator id and init data + * @dvs : dvs data for buck voltage control + */ +struct lp872x_platform_data { + u8 general_config; + bool update_config; + struct lp872x_regulator_data regulator_data[LP872X_MAX_REGULATORS]; + struct lp872x_dvs *dvs; +}; + +#endif -- cgit v1.2.3 From 79511ed3225a64f6b7fc749f4f9c1ed82f24f729 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 27 Jun 2012 14:23:10 +0100 Subject: regulator: core: Allow fixed enable_time to be set in the regulator_desc Many regulators have a fixed specification for their enable time. Allow this to be set in the regulator_desc as a number to save them having to implement an explicit operation. Signed-off-by: Mark Brown --- include/linux/regulator/driver.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux/regulator') diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 84f999ed394b..176bd4335581 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -180,6 +180,8 @@ enum regulator_type { * @vsel_mask: Mask for register bitfield used for selector * @enable_reg: Register for control when using regmap enable/disable ops * @enable_mask: Mask for control when using regmap enable/disable ops + * + * @enable_time: Time taken for initial enable of regulator (in uS). */ struct regulator_desc { const char *name; @@ -201,6 +203,8 @@ struct regulator_desc { unsigned int vsel_mask; unsigned int enable_reg; unsigned int enable_mask; + + unsigned int enable_time; }; /** -- cgit v1.2.3 From 65f735082de35aa4d44e8d0afe862798d0e09e29 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 27 Jun 2012 14:14:38 +0100 Subject: regulator: core: Add core support for GPIO controlled enable lines It is very common for regulators to support having their enable signal controlled by a GPIO. Since there are a bunch of fiddly things to get right like handling the operations when the enable signal is tied to a rail and it's just replicated code add support for this to the core. Drivers should set ena_gpio in their config if they have a GPIO control, using ena_gpio_flags to specify any flags (including GPIOF_OUT_INIT_ for the initial state) and ena_gpio_invert if the GPIO is active low. The core will then override any enable and disable operations the driver has and instead control the specified GPIO. This will in the future also allow us to further extend the core by identifying when several enable signals have been tied together and handling this properly. Signed-off-by: Mark Brown --- include/linux/regulator/driver.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include/linux/regulator') diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 176bd4335581..b1b7b8b43ece 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -220,6 +220,9 @@ struct regulator_desc { * @of_node: OpenFirmware node to parse for device tree bindings (may be * NULL). * @regmap: regmap to use for core regmap helpers + * @ena_gpio: GPIO controlling regulator enable. + * @ena_gpio_invert: Sense for GPIO enable control. + * @ena_gpio_flags: Flags to use when calling gpio_request_one() */ struct regulator_config { struct device *dev; @@ -227,6 +230,10 @@ struct regulator_config { void *driver_data; struct device_node *of_node; struct regmap *regmap; + + int ena_gpio; + unsigned int ena_gpio_invert:1; + unsigned int ena_gpio_flags; }; /* @@ -265,6 +272,10 @@ struct regulator_dev { void *reg_data; /* regulator_dev data */ struct dentry *debugfs; + + int ena_gpio; + unsigned int ena_gpio_invert:1; + unsigned int ena_gpio_state:1; }; struct regulator_dev * -- cgit v1.2.3 From 6be5bfc3bf0d31a70745a52e69f7f46de974193f Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Thu, 5 Jul 2012 18:12:01 +0530 Subject: regulator: fixed: dt: support for input supply Add support for input supply in DT parsing of node. The input supply will be provided by the property "vin-supply" in the regulator node. Signed-off-by: Laxman Dewangan Signed-off-by: Mark Brown --- include/linux/regulator/fixed.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux/regulator') diff --git a/include/linux/regulator/fixed.h b/include/linux/regulator/fixed.h index f83f7440b488..d6c24c53adf4 100644 --- a/include/linux/regulator/fixed.h +++ b/include/linux/regulator/fixed.h @@ -22,6 +22,7 @@ struct regulator_init_data; /** * struct fixed_voltage_config - fixed_voltage_config structure * @supply_name: Name of the regulator supply + * @input_supply: Name of the input regulator supply * @microvolts: Output voltage of regulator * @gpio: GPIO to use for enable control * set to -EINVAL if not used @@ -46,6 +47,7 @@ struct regulator_init_data; */ struct fixed_voltage_config { const char *supply_name; + const char *input_supply; int microvolts; int gpio; unsigned startup_delay; -- cgit v1.2.3