From e6c3092d43faf0aa095160cc552f8c05490d0962 Mon Sep 17 00:00:00 2001 From: Matti Vaittinen Date: Thu, 3 Jun 2021 08:41:21 +0300 Subject: regulator: add warning flags Add 'warning' level events and error flags to regulator core. Current regulator core notifications are used to inform consumers about errors where HW is misbehaving in such way it is assumed to be broken/unrecoverable. There are PMICs which are designed for system(s) that may have use for regulator indications sent before HW is damaged so that some board/consumer specific recovery-event can be performed while continuing most of the normal operations. Add new WARNING level events and notifications to be used for that purpose. Signed-off-by: Matti Vaittinen Link: https://lore.kernel.org/r/9b54aa5589ae4b5945d53d114bac3fae55fa4818.1622628333.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown --- include/linux/regulator/consumer.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'include/linux/regulator') diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index 20e84a84fb77..f72ca73631be 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -119,6 +119,16 @@ struct regulator_dev; #define REGULATOR_EVENT_PRE_DISABLE 0x400 #define REGULATOR_EVENT_ABORT_DISABLE 0x800 #define REGULATOR_EVENT_ENABLE 0x1000 +/* + * Following notifications should be emitted only if detected condition + * is such that the HW is likely to still be working but consumers should + * take a recovery action to prevent problems esacalating into errors. + */ +#define REGULATOR_EVENT_UNDER_VOLTAGE_WARN 0x2000 +#define REGULATOR_EVENT_OVER_CURRENT_WARN 0x4000 +#define REGULATOR_EVENT_OVER_VOLTAGE_WARN 0x8000 +#define REGULATOR_EVENT_OVER_TEMP_WARN 0x10000 +#define REGULATOR_EVENT_WARN_MASK 0x1E000 /* * Regulator errors that can be queried using regulator_get_error_flags @@ -138,6 +148,10 @@ struct regulator_dev; #define REGULATOR_ERROR_FAIL BIT(4) #define REGULATOR_ERROR_OVER_TEMP BIT(5) +#define REGULATOR_ERROR_UNDER_VOLTAGE_WARN BIT(6) +#define REGULATOR_ERROR_OVER_CURRENT_WARN BIT(7) +#define REGULATOR_ERROR_OVER_VOLTAGE_WARN BIT(8) +#define REGULATOR_ERROR_OVER_TEMP_WARN BIT(9) /** * struct pre_voltage_change_data - Data sent with PRE_VOLTAGE_CHANGE event -- cgit v1.2.3 From 157d2230193ae683fcffcc1cd0a2c3aa4479955f Mon Sep 17 00:00:00 2001 From: Matti Vaittinen Date: Thu, 3 Jun 2021 08:41:37 +0300 Subject: regulator: move rdev_print helpers to internal.h The rdev print helpers are a nice way to print messages related to a specific regulator device. Move them from core.c to internal.h As the rdev print helpers use rdev_get_name() export it from core.c. Also move the declaration from coupler.h to driver.h because the rdev name is not just a coupled regulator property. I guess the main audience for rdev_get_name() will be the regulator core and drivers. Signed-off-by: Matti Vaittinen Link: https://lore.kernel.org/r/dc7fd70dc31de4d0e820b7646bb78eeb04f80735.1622628333.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown --- include/linux/regulator/coupler.h | 5 ----- include/linux/regulator/driver.h | 10 ++++++++++ 2 files changed, 10 insertions(+), 5 deletions(-) (limited to 'include/linux/regulator') diff --git a/include/linux/regulator/coupler.h b/include/linux/regulator/coupler.h index 5f86824bd117..73291f280a23 100644 --- a/include/linux/regulator/coupler.h +++ b/include/linux/regulator/coupler.h @@ -52,7 +52,6 @@ struct regulator_coupler { #ifdef CONFIG_REGULATOR int regulator_coupler_register(struct regulator_coupler *coupler); -const char *rdev_get_name(struct regulator_dev *rdev); int regulator_check_consumers(struct regulator_dev *rdev, int *min_uV, int *max_uV, suspend_state_t state); @@ -69,10 +68,6 @@ static inline int regulator_coupler_register(struct regulator_coupler *coupler) { return 0; } -static inline const char *rdev_get_name(struct regulator_dev *rdev) -{ - return NULL; -} static inline int regulator_check_consumers(struct regulator_dev *rdev, int *min_uV, int *max_uV, suspend_state_t state) diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 4ea520c248e9..7ec0fa79d1a8 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -550,4 +550,14 @@ int regulator_desc_list_voltage_linear_range(const struct regulator_desc *desc, int regulator_desc_list_voltage_linear(const struct regulator_desc *desc, unsigned int selector); + +#ifdef CONFIG_REGULATOR +const char *rdev_get_name(struct regulator_dev *rdev); +#else +static inline const char *rdev_get_name(struct regulator_dev *rdev) +{ + return NULL; +} +#endif + #endif -- cgit v1.2.3 From 7111c6d1b31b42c8c758f6681e895a5116e3bad6 Mon Sep 17 00:00:00 2001 From: Matti Vaittinen Date: Thu, 3 Jun 2021 08:41:55 +0300 Subject: regulator: IRQ based event/error notification helpers Provide helper function for IC's implementing regulator notifications when an IRQ fires. The helper also works for IRQs which can not be acked. Helper can be set to disable the IRQ at handler and then re-enabling it on delayed work later. The helper also adds regulator_get_error_flags() errors in cache for the duration of IRQ disabling. Signed-off-by: Matti Vaittinen Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/ebdf86d8c22b924667ec2385330e30fcbfac0119.1622628334.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown --- include/linux/regulator/driver.h | 135 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 135 insertions(+) (limited to 'include/linux/regulator') diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 7ec0fa79d1a8..1d1a8951e740 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -413,6 +413,128 @@ struct regulator_config { struct gpio_desc *ena_gpiod; }; +/** + * struct regulator_err_state - regulator error/notification status + * + * @rdev: Regulator which status the struct indicates. + * @notifs: Events which have occurred on the regulator. + * @errors: Errors which are active on the regulator. + * @possible_errs: Errors which can be signaled (by given IRQ). + */ +struct regulator_err_state { + struct regulator_dev *rdev; + unsigned long notifs; + unsigned long errors; + int possible_errs; +}; + +/** + * struct regulator_irq_data - regulator error/notification status date + * + * @states: Status structs for each of the associated regulators. + * @num_states: Amount of associated regulators. + * @data: Driver data pointer given at regulator_irq_desc. + * @opaque: Value storage for IC driver. Core does not update this. ICs + * may want to store status register value here at map_event and + * compare contents at 'renable' callback to see if new problems + * have been added to status. If that is the case it may be + * desirable to return REGULATOR_ERROR_CLEARED and not + * REGULATOR_ERROR_ON to allow IRQ fire again and to generate + * notifications also for the new issues. + * + * This structure is passed to 'map_event' and 'renable' callbacks for + * reporting regulator status to core. + */ +struct regulator_irq_data { + struct regulator_err_state *states; + int num_states; + void *data; + long opaque; +}; + +/** + * struct regulator_irq_desc - notification sender for IRQ based events. + * + * @name: The visible name for the IRQ + * @fatal_cnt: If this IRQ is used to signal HW damaging condition it may be + * best to shut-down regulator(s) or reboot the SOC if error + * handling is repeatedly failing. If fatal_cnt is given the IRQ + * handling is aborted if it fails for fatal_cnt times and die() + * callback (if populated) or BUG() is called to try to prevent + * further damage. + * @reread_ms: The time which is waited before attempting to re-read status + * at the worker if IC reading fails. Immediate re-read is done + * if time is not specified. + * @irq_off_ms: The time which IRQ is kept disabled before re-evaluating the + * status for devices which keep IRQ disabled for duration of the + * error. If this is not given the IRQ is left enabled and renable + * is not called. + * @skip_off: If set to true the IRQ handler will attempt to check if any of + * the associated regulators are enabled prior to taking other + * actions. If no regulators are enabled and this is set to true + * a spurious IRQ is assumed and IRQ_NONE is returned. + * @high_prio: Boolean to indicate that high priority WQ should be used. + * @data: Driver private data pointer which will be passed as such to + * the renable, map_event and die callbacks in regulator_irq_data. + * @die: Protection callback. If IC status reading or recovery actions + * fail fatal_cnt times this callback or BUG() is called. This + * callback should implement a final protection attempt like + * disabling the regulator. If protection succeeded this may + * return 0. If anything else is returned the core assumes final + * protection failed and calls BUG() as a last resort. + * @map_event: Driver callback to map IRQ status into regulator devices with + * events / errors. NOTE: callback MUST initialize both the + * errors and notifs for all rdevs which it signals having + * active events as core does not clean the map data. + * REGULATOR_FAILED_RETRY can be returned to indicate that the + * status reading from IC failed. If this is repeated for + * fatal_cnt times the core will call die() callback or BUG() + * as a last resort to protect the HW. + * @renable: Optional callback to check status (if HW supports that) before + * re-enabling IRQ. If implemented this should clear the error + * flags so that errors fetched by regulator_get_error_flags() + * are updated. If callback is not implemented then errors are + * assumed to be cleared and IRQ is re-enabled. + * REGULATOR_FAILED_RETRY can be returned to + * indicate that the status reading from IC failed. If this is + * repeated for 'fatal_cnt' times the core will call die() + * callback or BUG() as a last resort to protect the HW. + * Returning zero indicates that the problem in HW has been solved + * and IRQ will be re-enabled. Returning REGULATOR_ERROR_ON + * indicates the error condition is still active and keeps IRQ + * disabled. Please note that returning REGULATOR_ERROR_ON does + * not retrigger evaluating what events are active or resending + * notifications. If this is needed you probably want to return + * zero and allow IRQ to retrigger causing events to be + * re-evaluated and re-sent. + * + * This structure is used for registering regulator IRQ notification helper. + */ +struct regulator_irq_desc { + const char *name; + int irq_flags; + int fatal_cnt; + int reread_ms; + int irq_off_ms; + bool skip_off; + bool high_prio; + void *data; + + int (*die)(struct regulator_irq_data *rid); + int (*map_event)(int irq, struct regulator_irq_data *rid, + unsigned long *dev_mask); + int (*renable)(struct regulator_irq_data *rid); +}; + +/* + * Return values for regulator IRQ helpers. + */ +enum { + REGULATOR_ERROR_CLEARED, + REGULATOR_FAILED_RETRY, + REGULATOR_ERROR_ON, +}; + /* * struct coupling_desc * @@ -477,6 +599,9 @@ struct regulator_dev { /* time when this regulator was disabled last time */ ktime_t last_off; + int cached_err; + bool use_cached_err; + spinlock_t err_lock; }; struct regulator_dev * @@ -491,6 +616,16 @@ void devm_regulator_unregister(struct device *dev, struct regulator_dev *rdev); int regulator_notifier_call_chain(struct regulator_dev *rdev, unsigned long event, void *data); +void *devm_regulator_irq_helper(struct device *dev, + const struct regulator_irq_desc *d, int irq, + int irq_flags, int common_errs, + int *per_rdev_errs, struct regulator_dev **rdev, + int rdev_amount); +void *regulator_irq_helper(struct device *dev, + const struct regulator_irq_desc *d, int irq, + int irq_flags, int common_errs, int *per_rdev_errs, + struct regulator_dev **rdev, int rdev_amount); +void regulator_irq_helper_cancel(void **handle); void *rdev_get_drvdata(struct regulator_dev *rdev); struct device *rdev_get_dev(struct regulator_dev *rdev); -- cgit v1.2.3 From 89a6a5e56c8248a077d12424a1383a6b18ea840b Mon Sep 17 00:00:00 2001 From: Matti Vaittinen Date: Thu, 3 Jun 2021 08:42:12 +0300 Subject: regulator: add property parsing and callbacks to set protection limits Add DT property parsing code and setting callback for regulator over/under voltage, over-current and temperature error limits. Signed-off-by: Matti Vaittinen Link: https://lore.kernel.org/r/e7b8007ba9eae7076178bf3363fb942ccb1cc9a5.1622628334.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown --- include/linux/regulator/driver.h | 41 +++++++++++++++++++++++++++++++++++---- include/linux/regulator/machine.h | 26 +++++++++++++++++++++++++ 2 files changed, 63 insertions(+), 4 deletions(-) (limited to 'include/linux/regulator') diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 1d1a8951e740..4ebfaacf42b7 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -40,6 +40,15 @@ enum regulator_status { REGULATOR_STATUS_UNDEFINED, }; +enum regulator_detection_severity { + /* Hardware shut down voltage outputs if condition is detected */ + REGULATOR_SEVERITY_PROT, + /* Hardware is probably damaged/inoperable */ + REGULATOR_SEVERITY_ERR, + /* Hardware is still recoverable but recovery action must be taken */ + REGULATOR_SEVERITY_WARN, +}; + /* Initialize struct linear_range for regulators */ #define REGULATOR_LINEAR_RANGE(_min_uV, _min_sel, _max_sel, _step_uV) \ { \ @@ -78,8 +87,25 @@ enum regulator_status { * @get_current_limit: Get the configured limit for a current-limited regulator. * @set_input_current_limit: Configure an input limit. * - * @set_over_current_protection: Support capability of automatically shutting - * down when detecting an over current event. + * @set_over_current_protection: Support enabling of and setting limits for over + * current situation detection. Detection can be configured for three + * levels of severity. + * REGULATOR_SEVERITY_PROT should automatically shut down the regulator(s). + * REGULATOR_SEVERITY_ERR should indicate that over-current situation is + * caused by an unrecoverable error but HW does not perform + * automatic shut down. + * REGULATOR_SEVERITY_WARN should indicate situation where hardware is + * still believed to not be damaged but that a board sepcific + * recovery action is needed. If lim_uA is 0 the limit should not + * be changed but the detection should just be enabled/disabled as + * is requested. + * @set_over_voltage_protection: Support enabling of and setting limits for over + * voltage situation detection. Detection can be configured for same + * severities as over current protection. + * @set_under_voltage_protection: Support enabling of and setting limits for + * under situation detection. + * @set_thermal_protection: Support enabling of and setting limits for over + * temperature situation detection. * * @set_active_discharge: Set active discharge enable/disable of regulators. * @@ -143,8 +169,15 @@ struct regulator_ops { int (*get_current_limit) (struct regulator_dev *); int (*set_input_current_limit) (struct regulator_dev *, int lim_uA); - int (*set_over_current_protection) (struct regulator_dev *); - int (*set_active_discharge) (struct regulator_dev *, bool enable); + int (*set_over_current_protection)(struct regulator_dev *, int lim_uA, + int severity, bool enable); + int (*set_over_voltage_protection)(struct regulator_dev *, int lim_uV, + int severity, bool enable); + int (*set_under_voltage_protection)(struct regulator_dev *, int lim_uV, + int severity, bool enable); + int (*set_thermal_protection)(struct regulator_dev *, int lim, + int severity, bool enable); + int (*set_active_discharge)(struct regulator_dev *, bool enable); /* enable/disable regulator */ int (*enable) (struct regulator_dev *); diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index 8a56f033b6cd..68b4a514a410 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -83,6 +83,14 @@ struct regulator_state { bool changeable; }; +#define REGULATOR_NOTIF_LIMIT_DISABLE -1 +#define REGULATOR_NOTIF_LIMIT_ENABLE -2 +struct notification_limit { + int prot; + int err; + int warn; +}; + /** * struct regulation_constraints - regulator operating constraints. * @@ -100,6 +108,11 @@ struct regulator_state { * @ilim_uA: Maximum input current. * @system_load: Load that isn't captured by any consumer requests. * + * @over_curr_limits: Limits for acting on over current. + * @over_voltage_limits: Limits for acting on over voltage. + * @under_voltage_limits: Limits for acting on under voltage. + * @temp_limits: Limits for acting on over temperature. + * @max_spread: Max possible spread between coupled regulators * @max_uV_step: Max possible step change in voltage * @valid_modes_mask: Mask of modes which may be configured by consumers. @@ -116,6 +129,11 @@ struct regulator_state { * @pull_down: Enable pull down when regulator is disabled. * @over_current_protection: Auto disable on over current event. * + * @over_current_detection: Configure over current limits. + * @over_voltage_detection: Configure over voltage limits. + * @under_voltage_detection: Configure under voltage limits. + * @over_temp_detection: Configure over temperature limits. + * * @input_uV: Input voltage for regulator when supplied by another regulator. * * @state_disk: State for regulator when system is suspended in disk mode. @@ -172,6 +190,10 @@ struct regulation_constraints { struct regulator_state state_disk; struct regulator_state state_mem; struct regulator_state state_standby; + struct notification_limit over_curr_limits; + struct notification_limit over_voltage_limits; + struct notification_limit under_voltage_limits; + struct notification_limit temp_limits; suspend_state_t initial_state; /* suspend state to set at init */ /* mode to set on startup */ @@ -193,6 +215,10 @@ struct regulation_constraints { unsigned soft_start:1; /* ramp voltage slowly */ unsigned pull_down:1; /* pull down resistor when regulator off */ unsigned over_current_protection:1; /* auto disable on over current */ + unsigned over_current_detection:1; /* notify on over current */ + unsigned over_voltage_detection:1; /* notify on over voltage */ + unsigned under_voltage_detection:1; /* notify on under voltage */ + unsigned over_temp_detection:1; /* notify on over temperature */ }; /** -- cgit v1.2.3