From 55f4fa4e33e90c6b25b4c8ed038392a73b654fef Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Thu, 23 Apr 2009 20:10:43 +0200 Subject: Maxim 1586 regulator driver The Maxim 1586 regulator is a voltage regulator with 2 voltage outputs, specially suitable for Marvell PXA chips. One output is in the range of required VCC_CORE by the PXA27x chips, the other in the VCC_USIM required as well by PXA27x chips. The chip is controlled through the I2C bus. Signed-off-by: Robert Jarzmik Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- include/linux/regulator/max1586.h | 52 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) create mode 100644 include/linux/regulator/max1586.h (limited to 'include/linux/regulator') diff --git a/include/linux/regulator/max1586.h b/include/linux/regulator/max1586.h new file mode 100644 index 000000000000..2056973396b6 --- /dev/null +++ b/include/linux/regulator/max1586.h @@ -0,0 +1,52 @@ +/* + * max1586.h -- Voltage regulation for the Maxim 1586 + * + * Copyright (C) 2008 Robert Jarzmik + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef REGULATOR_MAX1586 +#define REGULATOR_MAX1586 + +#include + +#define MAX1586_V3 0 +#define MAX1586_V6 1 + +/** + * max1586_subdev_data - regulator data + * @id: regulator Id (either MAX1586_V3 or MAX1586_V6) + * @name: regulator cute name (example for V3: "vcc_core") + * @platform_data: regulator init data (contraints, supplies, ...) + */ +struct max1586_subdev_data { + int id; + char *name; + struct regulator_init_data *platform_data; +}; + +/** + * max1586_platform_data - platform data for max1586 + * @num_subdevs: number of regultors used (may be 1 or 2) + * @subdevs: regulator used + * At most, there will be a regulator for V3 and one for V6 voltages. + */ +struct max1586_platform_data { + int num_subdevs; + struct max1586_subdev_data *subdevs; +}; + +#endif -- cgit v1.2.3 From 1d98cccf7f8b944ba4ea56d14bbb7c2eeee59bfe Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Sun, 26 Apr 2009 16:49:39 +0300 Subject: regulator: add userspace-consumer driver The userspace-consumer driver allows control of voltage and current regulator state from userspace. This is required for fine-grained power management of devices that are completely controller by userspace applications, e.g. a GPS transciever connected to a serial port. Signed-off-by: Mike Rapoport Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- include/linux/regulator/userspace-consumer.h | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 include/linux/regulator/userspace-consumer.h (limited to 'include/linux/regulator') diff --git a/include/linux/regulator/userspace-consumer.h b/include/linux/regulator/userspace-consumer.h new file mode 100644 index 000000000000..b4554ce9d4bb --- /dev/null +++ b/include/linux/regulator/userspace-consumer.h @@ -0,0 +1,25 @@ +#ifndef __REGULATOR_PLATFORM_CONSUMER_H_ +#define __REGULATOR_PLATFORM_CONSUMER_H_ + +struct regulator_consumer_supply; + +/** + * struct regulator_userspace_consumer_data - line consumer + * initialisation data. + * + * @name: Name for the consumer line + * @num_supplies: Number of supplies feeding the line + * @supplies: Supplies configuration. + * @init_on: Set if the regulators supplying the line should be + * enabled during initialisation + */ +struct regulator_userspace_consumer_data { + const char *name; + + int num_supplies; + struct regulator_bulk_data *supplies; + + bool init_on; +}; + +#endif /* __REGULATOR_PLATFORM_CONSUMER_H_ */ -- cgit v1.2.3 From 0cbdf7bce5b98807b946d1a96956f30dcae24a50 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Tue, 19 May 2009 07:33:55 +0200 Subject: LP3971 PMIC regulator driver (updated and combined version) This patch adds regulator drivers for National Semiconductors LP3971 PMIC. This LP3971 PMIC controller has 3 DC/DC voltage converters and 5 low drop-out (LDO) regulators. LP3971 PMIC controller uses I2C interface. Reviewed-by: Kyungmin Park Signed-off-by: Marek Szyprowski Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- include/linux/regulator/lp3971.h | 51 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+) create mode 100644 include/linux/regulator/lp3971.h (limited to 'include/linux/regulator') diff --git a/include/linux/regulator/lp3971.h b/include/linux/regulator/lp3971.h new file mode 100644 index 000000000000..61401649fe7d --- /dev/null +++ b/include/linux/regulator/lp3971.h @@ -0,0 +1,51 @@ +/* + * National Semiconductors LP3971 PMIC chip client interface + * + * Copyright (C) 2009 Samsung Electronics + * Author: Marek Szyprowski + * + * Based on wm8400.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __LINUX_REGULATOR_LP3971_H +#define __LINUX_REGULATOR_LP3971_H + +#include + +#define LP3971_LDO1 0 +#define LP3971_LDO2 1 +#define LP3971_LDO3 2 +#define LP3971_LDO4 3 +#define LP3971_LDO5 4 + +#define LP3971_DCDC1 5 +#define LP3971_DCDC2 6 +#define LP3971_DCDC3 7 + +#define LP3971_NUM_REGULATORS 8 + +struct lp3971_regulator_subdev { + int id; + struct regulator_init_data *initdata; +}; + +struct lp3971_platform_data { + int num_regulators; + struct lp3971_regulator_subdev *regulators; +}; + +#endif -- cgit v1.2.3 From b110a8fb242bc34e4b7686252899ce0fca956e2c Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Thu, 28 May 2009 07:15:16 +0200 Subject: regulator/max1586: support increased V3 voltage range The V3 regulator can be configured with an external resistor connected to the feedback pin (R24 in the data sheet) to increase the voltage range. For example, hx4700 has R24 = 3.32 kOhm to achieve a maximum V3 voltage of 1.55 V which is needed for 624 MHz CPU frequency. Signed-off-by: Philipp Zabel Acked-by: Mark Brown Acked-by: Robert Jarzmik Signed-off-by: Liam Girdwood --- include/linux/regulator/max1586.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include/linux/regulator') diff --git a/include/linux/regulator/max1586.h b/include/linux/regulator/max1586.h index 2056973396b6..44563192bf16 100644 --- a/include/linux/regulator/max1586.h +++ b/include/linux/regulator/max1586.h @@ -26,6 +26,12 @@ #define MAX1586_V3 0 #define MAX1586_V6 1 +/* precalculated values for v3_gain */ +#define MAX1586_GAIN_NO_R24 1000000 /* 700000 .. 1475000 mV */ +#define MAX1586_GAIN_R24_3k32 1051098 /* 735768 .. 1550369 mV */ +#define MAX1586_GAIN_R24_5k11 1078648 /* 755053 .. 1591005 mV */ +#define MAX1586_GAIN_R24_7k5 1115432 /* 780802 .. 1645262 mV */ + /** * max1586_subdev_data - regulator data * @id: regulator Id (either MAX1586_V3 or MAX1586_V6) @@ -43,10 +49,15 @@ struct max1586_subdev_data { * @num_subdevs: number of regultors used (may be 1 or 2) * @subdevs: regulator used * At most, there will be a regulator for V3 and one for V6 voltages. + * @v3_gain: gain on the V3 voltage output multiplied by 1e6. + * This can be calculated as ((1 + R24/R25 + R24/185.5kOhm) * 1e6) + * for an external resistor configuration as described in the + * data sheet (R25=100kOhm). */ struct max1586_platform_data { int num_subdevs; struct max1586_subdev_data *subdevs; + int v3_gain; }; #endif -- cgit v1.2.3