From 17132da70eb766785b9b4677bacce18cc11ea442 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 6 Aug 2020 20:20:33 +0200 Subject: ARM: samsung: move pm check code to drivers/soc This is the only part of plat-samsung that is really shared between the s3c and s5p ports. Moving it to drivers/soc/ lets us make them completely independent. Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20200806182059.2431-16-krzk@kernel.org Signed-off-by: Krzysztof Kozlowski --- include/linux/soc/samsung/s3c-pm.h | 84 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 84 insertions(+) create mode 100644 include/linux/soc/samsung/s3c-pm.h (limited to 'include/linux/soc') diff --git a/include/linux/soc/samsung/s3c-pm.h b/include/linux/soc/samsung/s3c-pm.h new file mode 100644 index 000000000000..730bd1d3d09a --- /dev/null +++ b/include/linux/soc/samsung/s3c-pm.h @@ -0,0 +1,84 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Tomasz Figa + * Copyright (c) 2004 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Written by Ben Dooks, + */ + +#ifndef __LINUX_SOC_SAMSUNG_S3C_PM_H +#define __LINUX_SOC_SAMSUNG_S3C_PM_H __FILE__ + +#include + +/* PM debug functions */ + +/** + * struct pm_uart_save - save block for core UART + * @ulcon: Save value for S3C2410_ULCON + * @ucon: Save value for S3C2410_UCON + * @ufcon: Save value for S3C2410_UFCON + * @umcon: Save value for S3C2410_UMCON + * @ubrdiv: Save value for S3C2410_UBRDIV + * + * Save block for UART registers to be held over sleep and restored if they + * are needed (say by debug). +*/ +struct pm_uart_save { + u32 ulcon; + u32 ucon; + u32 ufcon; + u32 umcon; + u32 ubrdiv; + u32 udivslot; +}; + +#ifdef CONFIG_SAMSUNG_PM_DEBUG +/** + * s3c_pm_dbg() - low level debug function for use in suspend/resume. + * @msg: The message to print. + * + * This function is used mainly to debug the resume process before the system + * can rely on printk/console output. It uses the low-level debugging output + * routine printascii() to do its work. + */ +extern void s3c_pm_dbg(const char *msg, ...); + +#define S3C_PMDBG(fmt...) s3c_pm_dbg(fmt) + +extern void s3c_pm_save_uarts(bool is_s3c24xx); +extern void s3c_pm_restore_uarts(bool is_s3c24xx); + +#ifdef CONFIG_ARCH_S3C64XX +extern void s3c_pm_arch_update_uart(void __iomem *regs, + struct pm_uart_save *save); +#else +static inline void +s3c_pm_arch_update_uart(void __iomem *regs, struct pm_uart_save *save) +{ +} +#endif + +#else +#define S3C_PMDBG(fmt...) pr_debug(fmt) + +static inline void s3c_pm_save_uarts(bool is_s3c24xx) { } +static inline void s3c_pm_restore_uarts(bool is_s3c24xx) { } +#endif + +/* suspend memory checking */ + +#ifdef CONFIG_SAMSUNG_PM_CHECK +extern void s3c_pm_check_prepare(void); +extern void s3c_pm_check_restore(void); +extern void s3c_pm_check_cleanup(void); +extern void s3c_pm_check_store(void); +#else +#define s3c_pm_check_prepare() do { } while (0) +#define s3c_pm_check_restore() do { } while (0) +#define s3c_pm_check_cleanup() do { } while (0) +#define s3c_pm_check_store() do { } while (0) +#endif + +#endif -- cgit v1.2.3 From 7dbad03ebcb924cde142f7477d65a54ffb1166a3 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 6 Aug 2020 20:20:39 +0200 Subject: ARM: s3c: adc: move header to linux/soc/samsung There are multiple drivers using the private adc interface. It seems unlikely that they would ever get converted to iio, so make the current state official by making the header file global. The s3c2410_ts driver needs a couple of register definitions as well. Signed-off-by: Arnd Bergmann Acked-by: Guenter Roeck Acked-by: Dmitry Torokhov Acked-by: Sebastian Reichel Link: https://lore.kernel.org/r/20200806182059.2431-22-krzk@kernel.org Signed-off-by: Krzysztof Kozlowski --- include/linux/soc/samsung/s3c-adc.h | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) create mode 100644 include/linux/soc/samsung/s3c-adc.h (limited to 'include/linux/soc') diff --git a/include/linux/soc/samsung/s3c-adc.h b/include/linux/soc/samsung/s3c-adc.h new file mode 100644 index 000000000000..591c94ef957d --- /dev/null +++ b/include/linux/soc/samsung/s3c-adc.h @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C ADC driver information + */ + +#ifndef __LINUX_SOC_SAMSUNG_S3C_ADC_H +#define __LINUX_SOC_SAMSUNG_S3C_ADC_H __FILE__ + +struct s3c_adc_client; +struct platform_device; + +extern int s3c_adc_start(struct s3c_adc_client *client, + unsigned int channel, unsigned int nr_samples); + +extern int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch); + +extern struct s3c_adc_client * + s3c_adc_register(struct platform_device *pdev, + void (*select)(struct s3c_adc_client *client, + unsigned selected), + void (*conv)(struct s3c_adc_client *client, + unsigned d0, unsigned d1, + unsigned *samples_left), + unsigned int is_ts); + +extern void s3c_adc_release(struct s3c_adc_client *client); + +#endif /* __LINUX_SOC_SAMSUNG_S3C_ADC_H */ -- cgit v1.2.3 From 81b11a6a09964cfea4c525d22548790a1d92d38f Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 6 Aug 2020 20:20:52 +0200 Subject: ARM: s3c: remove cpufreq header dependencies The cpufreq drivers are split between the machine directory and the drivers/cpufreq directory. In order to share header files after we convert s3c to multiplatform, those headers have to live in a different global location. Move them to linux/soc/samsung/ in lack of a better place. Signed-off-by: Arnd Bergmann Acked-by: Viresh Kumar Link: https://lore.kernel.org/r/20200806182059.2431-35-krzk@kernel.org Signed-off-by: Krzysztof Kozlowski --- include/linux/soc/samsung/s3c-cpu-freq.h | 145 +++++++++++++ include/linux/soc/samsung/s3c-cpufreq-core.h | 291 +++++++++++++++++++++++++++ include/linux/soc/samsung/s3c-pm.h | 10 + 3 files changed, 446 insertions(+) create mode 100644 include/linux/soc/samsung/s3c-cpu-freq.h create mode 100644 include/linux/soc/samsung/s3c-cpufreq-core.h (limited to 'include/linux/soc') diff --git a/include/linux/soc/samsung/s3c-cpu-freq.h b/include/linux/soc/samsung/s3c-cpu-freq.h new file mode 100644 index 000000000000..63e88fd5dea2 --- /dev/null +++ b/include/linux/soc/samsung/s3c-cpu-freq.h @@ -0,0 +1,145 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2006-2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C CPU frequency scaling support - driver and board + */ +#ifndef __LINUX_SOC_SAMSUNG_S3C_CPU_FREQ_H +#define __LINUX_SOC_SAMSUNG_S3C_CPU_FREQ_H + +#include + +struct s3c_cpufreq_info; +struct s3c_cpufreq_board; +struct s3c_iotimings; + +/** + * struct s3c_freq - frequency information (mainly for core drivers) + * @fclk: The FCLK frequency in Hz. + * @armclk: The ARMCLK frequency in Hz. + * @hclk_tns: HCLK cycle time in 10ths of nano-seconds. + * @hclk: The HCLK frequency in Hz. + * @pclk: The PCLK frequency in Hz. + * + * This contains the frequency information about the current configuration + * mainly for the core drivers to ensure we do not end up passing about + * a large number of parameters. + * + * The @hclk_tns field is a useful cache for the parts of the drivers that + * need to calculate IO timings and suchlike. + */ +struct s3c_freq { + unsigned long fclk; + unsigned long armclk; + unsigned long hclk_tns; /* in 10ths of ns */ + unsigned long hclk; + unsigned long pclk; +}; + +/** + * struct s3c_cpufreq_freqs - s3c cpufreq notification information. + * @freqs: The cpufreq setting information. + * @old: The old clock settings. + * @new: The new clock settings. + * @pll_changing: Set if the PLL is changing. + * + * Wrapper 'struct cpufreq_freqs' so that any drivers receiving the + * notification can use this information that is not provided by just + * having the core frequency alone. + * + * The pll_changing flag is used to indicate if the PLL itself is + * being set during this change. This is important as the clocks + * will temporarily be set to the XTAL clock during this time, so + * drivers may want to close down their output during this time. + * + * Note, this is not being used by any current drivers and therefore + * may be removed in the future. + */ +struct s3c_cpufreq_freqs { + struct cpufreq_freqs freqs; + struct s3c_freq old; + struct s3c_freq new; + + unsigned int pll_changing:1; +}; + +#define to_s3c_cpufreq(_cf) container_of(_cf, struct s3c_cpufreq_freqs, freqs) + +/** + * struct s3c_clkdivs - clock divisor information + * @p_divisor: Divisor from FCLK to PCLK. + * @h_divisor: Divisor from FCLK to HCLK. + * @arm_divisor: Divisor from FCLK to ARMCLK (not all CPUs). + * @dvs: Non-zero if using DVS mode for ARMCLK. + * + * Divisor settings for the core clocks. + */ +struct s3c_clkdivs { + int p_divisor; + int h_divisor; + int arm_divisor; + unsigned char dvs; +}; + +#define PLLVAL(_m, _p, _s) (((_m) << 12) | ((_p) << 4) | (_s)) + +/** + * struct s3c_pllval - PLL value entry. + * @freq: The frequency for this entry in Hz. + * @pll_reg: The PLL register setting for this PLL value. + */ +struct s3c_pllval { + unsigned long freq; + unsigned long pll_reg; +}; + +/** + * struct s3c_cpufreq_board - per-board cpu frequency informatin + * @refresh: The SDRAM refresh period in nanoseconds. + * @auto_io: Set if the IO timing settings should be generated from the + * initialisation time hardware registers. + * @need_io: Set if the board has external IO on any of the chipselect + * lines that will require the hardware timing registers to be + * updated on a clock change. + * @max: The maxium frequency limits for the system. Any field that + * is left at zero will use the CPU's settings. + * + * This contains the board specific settings that affect how the CPU + * drivers chose settings. These include the memory refresh and IO + * timing information. + * + * Registration depends on the driver being used, the ARMCLK only + * implementation does not currently need this but the older style + * driver requires this to be available. + */ +struct s3c_cpufreq_board { + unsigned int refresh; + unsigned int auto_io:1; /* automatically init io timings. */ + unsigned int need_io:1; /* set if needs io timing support. */ + + /* any non-zero field in here is taken as an upper limit. */ + struct s3c_freq max; /* frequency limits */ +}; + +/* Things depending on frequency scaling. */ +#ifdef CONFIG_ARM_S3C_CPUFREQ +#define __init_or_cpufreq +#else +#define __init_or_cpufreq __init +#endif + +/* Board functions */ + +#ifdef CONFIG_ARM_S3C_CPUFREQ +extern int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board); +#else + +static inline int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board) +{ + return 0; +} +#endif /* CONFIG_ARM_S3C_CPUFREQ */ + +#endif diff --git a/include/linux/soc/samsung/s3c-cpufreq-core.h b/include/linux/soc/samsung/s3c-cpufreq-core.h new file mode 100644 index 000000000000..c578b07ccd5d --- /dev/null +++ b/include/linux/soc/samsung/s3c-cpufreq-core.h @@ -0,0 +1,291 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2006-2009 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C CPU frequency scaling support - core support + */ +#ifndef __LINUX_SOC_SAMSUNG_S3C_CPUFREQ_CORE_H +#define __LINUX_SOC_SAMSUNG_S3C_CPUFREQ_CORE_H + +#include + +struct seq_file; + +#define MAX_BANKS (8) +#define S3C2412_MAX_IO (8) + +/** + * struct s3c2410_iobank_timing - IO bank timings for S3C2410 style timings + * @bankcon: The cached version of settings in this structure. + * @tacp: + * @tacs: Time from address valid to nCS asserted. + * @tcos: Time from nCS asserted to nOE or nWE asserted. + * @tacc: Time that nOE or nWE is asserted. + * @tcoh: Time nCS is held after nOE or nWE are released. + * @tcah: Time address is held for after + * @nwait_en: Whether nWAIT is enabled for this bank. + * + * This structure represents the IO timings for a S3C2410 style IO bank + * used by the CPU frequency support if it needs to change the settings + * of the IO. + */ +struct s3c2410_iobank_timing { + unsigned long bankcon; + unsigned int tacp; + unsigned int tacs; + unsigned int tcos; + unsigned int tacc; + unsigned int tcoh; /* nCS hold after nOE/nWE */ + unsigned int tcah; /* Address hold after nCS */ + unsigned char nwait_en; /* nWait enabled for bank. */ +}; + +/** + * struct s3c2412_iobank_timing - io timings for PL092 (S3C2412) style IO + * @idcy: The idle cycle time between transactions. + * @wstrd: nCS release to end of read cycle. + * @wstwr: nCS release to end of write cycle. + * @wstoen: nCS assertion to nOE assertion time. + * @wstwen: nCS assertion to nWE assertion time. + * @wstbrd: Burst ready delay. + * @smbidcyr: Register cache for smbidcyr value. + * @smbwstrd: Register cache for smbwstrd value. + * @smbwstwr: Register cache for smbwstwr value. + * @smbwstoen: Register cache for smbwstoen value. + * @smbwstwen: Register cache for smbwstwen value. + * @smbwstbrd: Register cache for smbwstbrd value. + * + * Timing information for a IO bank on an S3C2412 or similar system which + * uses a PL093 block. + */ +struct s3c2412_iobank_timing { + unsigned int idcy; + unsigned int wstrd; + unsigned int wstwr; + unsigned int wstoen; + unsigned int wstwen; + unsigned int wstbrd; + + /* register cache */ + unsigned char smbidcyr; + unsigned char smbwstrd; + unsigned char smbwstwr; + unsigned char smbwstoen; + unsigned char smbwstwen; + unsigned char smbwstbrd; +}; + +union s3c_iobank { + struct s3c2410_iobank_timing *io_2410; + struct s3c2412_iobank_timing *io_2412; +}; + +/** + * struct s3c_iotimings - Chip IO timings holder + * @bank: The timings for each IO bank. + */ +struct s3c_iotimings { + union s3c_iobank bank[MAX_BANKS]; +}; + +/** + * struct s3c_plltab - PLL table information. + * @vals: List of PLL values. + * @size: Size of the PLL table @vals. + */ +struct s3c_plltab { + struct s3c_pllval *vals; + int size; +}; + +/** + * struct s3c_cpufreq_config - current cpu frequency configuration + * @freq: The current settings for the core clocks. + * @max: Maxium settings, derived from core, board and user settings. + * @pll: The PLL table entry for the current PLL settings. + * @divs: The divisor settings for the core clocks. + * @info: The current core driver information. + * @board: The information for the board we are running on. + * @lock_pll: Set if the PLL settings cannot be changed. + * + * This is for the core drivers that need to know information about + * the current settings and values. It should not be needed by any + * device drivers. +*/ +struct s3c_cpufreq_config { + struct s3c_freq freq; + struct s3c_freq max; + struct clk *mpll; + struct cpufreq_frequency_table pll; + struct s3c_clkdivs divs; + struct s3c_cpufreq_info *info; /* for core, not drivers */ + struct s3c_cpufreq_board *board; + + unsigned int lock_pll:1; +}; + +/** + * struct s3c_cpufreq_info - Information for the CPU frequency driver. + * @name: The name of this implementation. + * @max: The maximum frequencies for the system. + * @latency: Transition latency to give to cpufreq. + * @locktime_m: The lock-time in uS for the MPLL. + * @locktime_u: The lock-time in uS for the UPLL. + * @locttime_bits: The number of bits each LOCKTIME field. + * @need_pll: Set if this driver needs to change the PLL values to achieve + * any frequency changes. This is really only need by devices like the + * S3C2410 where there is no or limited divider between the PLL and the + * ARMCLK. + * @get_iotiming: Get the current IO timing data, mainly for use at start. + * @set_iotiming: Update the IO timings from the cached copies calculated + * from the @calc_iotiming entry when changing the frequency. + * @calc_iotiming: Calculate and update the cached copies of the IO timings + * from the newly calculated frequencies. + * @calc_freqtable: Calculate (fill in) the given frequency table from the + * current frequency configuration. If the table passed in is NULL, + * then the return is the number of elements to be filled for allocation + * of the table. + * @set_refresh: Set the memory refresh configuration. + * @set_fvco: Set the PLL frequencies. + * @set_divs: Update the clock divisors. + * @calc_divs: Calculate the clock divisors. + */ +struct s3c_cpufreq_info { + const char *name; + struct s3c_freq max; + + unsigned int latency; + + unsigned int locktime_m; + unsigned int locktime_u; + unsigned char locktime_bits; + + unsigned int need_pll:1; + + /* driver routines */ + + int (*get_iotiming)(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *timings); + + void (*set_iotiming)(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *timings); + + int (*calc_iotiming)(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *timings); + + int (*calc_freqtable)(struct s3c_cpufreq_config *cfg, + struct cpufreq_frequency_table *t, + size_t table_size); + + void (*debug_io_show)(struct seq_file *seq, + struct s3c_cpufreq_config *cfg, + union s3c_iobank *iob); + + void (*set_refresh)(struct s3c_cpufreq_config *cfg); + void (*set_fvco)(struct s3c_cpufreq_config *cfg); + void (*set_divs)(struct s3c_cpufreq_config *cfg); + int (*calc_divs)(struct s3c_cpufreq_config *cfg); +}; + +extern int s3c_cpufreq_register(struct s3c_cpufreq_info *info); + +extern int s3c_plltab_register(struct cpufreq_frequency_table *plls, + unsigned int plls_no); + +/* exports and utilities for debugfs */ +extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void); +extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void); + +#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS +#define s3c_cpufreq_debugfs_call(x) x +#else +#define s3c_cpufreq_debugfs_call(x) NULL +#endif + +/* Useful utility functions. */ + +extern struct clk *s3c_cpufreq_clk_get(struct device *, const char *); + +/* S3C2410 and compatible exported functions */ + +extern void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg); +extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg); + +#ifdef CONFIG_S3C2410_IOTIMING +extern void s3c2410_iotiming_debugfs(struct seq_file *seq, + struct s3c_cpufreq_config *cfg, + union s3c_iobank *iob); + +extern int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *iot); + +extern int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *timings); + +extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *iot); +#else +#define s3c2410_iotiming_debugfs NULL +#define s3c2410_iotiming_calc NULL +#define s3c2410_iotiming_get NULL +#define s3c2410_iotiming_set NULL +#endif /* CONFIG_S3C2410_IOTIMING */ + +/* S3C2412 compatible routines */ + +#ifdef CONFIG_S3C2412_IOTIMING +extern void s3c2412_iotiming_debugfs(struct seq_file *seq, + struct s3c_cpufreq_config *cfg, + union s3c_iobank *iob); + +extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *timings); + +extern int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *iot); + +extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *iot); +#else +#define s3c2412_iotiming_debugfs NULL +#define s3c2412_iotiming_calc NULL +#define s3c2412_iotiming_get NULL +#define s3c2412_iotiming_set NULL +#endif /* CONFIG_S3C2412_IOTIMING */ + +#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_DEBUG +#define s3c_freq_dbg(x...) printk(KERN_INFO x) +#else +#define s3c_freq_dbg(x...) do { if (0) printk(x); } while (0) +#endif /* CONFIG_ARM_S3C24XX_CPUFREQ_DEBUG */ + +#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_IODEBUG +#define s3c_freq_iodbg(x...) printk(KERN_INFO x) +#else +#define s3c_freq_iodbg(x...) do { if (0) printk(x); } while (0) +#endif /* CONFIG_ARM_S3C24XX_CPUFREQ_IODEBUG */ + +static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table, + int index, size_t table_size, + unsigned int freq) +{ + if (index < 0) + return index; + + if (table) { + if (index >= table_size) + return -ENOMEM; + + s3c_freq_dbg("%s: { %d = %u kHz }\n", + __func__, index, freq); + + table[index].driver_data = index; + table[index].frequency = freq; + } + + return index + 1; +} + +#endif diff --git a/include/linux/soc/samsung/s3c-pm.h b/include/linux/soc/samsung/s3c-pm.h index 730bd1d3d09a..f9164559c99f 100644 --- a/include/linux/soc/samsung/s3c-pm.h +++ b/include/linux/soc/samsung/s3c-pm.h @@ -81,4 +81,14 @@ extern void s3c_pm_check_store(void); #define s3c_pm_check_store() do { } while (0) #endif +/* system device subsystems */ + +extern struct bus_type s3c2410_subsys; +extern struct bus_type s3c2410a_subsys; +extern struct bus_type s3c2412_subsys; +extern struct bus_type s3c2416_subsys; +extern struct bus_type s3c2440_subsys; +extern struct bus_type s3c2442_subsys; +extern struct bus_type s3c2443_subsys; + #endif -- cgit v1.2.3 From 44c01f5ce1c7518886a87d5522528e30e0b4d9f8 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 6 Aug 2020 20:20:53 +0200 Subject: cpufreq: s3c2412: use global s3c2412_cpufreq_setrefresh There are two identical copies of the s3c2412_cpufreq_setrefresh function: a static one in the cpufreq driver and a global version in iotiming-s3c2412.c. As the function requires the use of a hardcoded register address from a header that we want to not be visible to drivers, just move the existing global function and add a declaration in one of the cpufreq header files. Signed-off-by: Arnd Bergmann Acked-by: Viresh Kumar Link: https://lore.kernel.org/r/20200806182059.2431-36-krzk@kernel.org Signed-off-by: Krzysztof Kozlowski --- include/linux/soc/samsung/s3c-cpufreq-core.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/soc') diff --git a/include/linux/soc/samsung/s3c-cpufreq-core.h b/include/linux/soc/samsung/s3c-cpufreq-core.h index c578b07ccd5d..e0c7217a0f53 100644 --- a/include/linux/soc/samsung/s3c-cpufreq-core.h +++ b/include/linux/soc/samsung/s3c-cpufreq-core.h @@ -248,6 +248,7 @@ extern int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg, extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg, struct s3c_iotimings *iot); +extern void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg); #else #define s3c2412_iotiming_debugfs NULL #define s3c2412_iotiming_calc NULL -- cgit v1.2.3 From c38758e3d574380ccfa583793be14c1cc8a322ff Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 6 Aug 2020 20:20:54 +0200 Subject: cpufreq: s3c24xx: move low-level clk reg access into platform code Rather than have the cpufreq drivers touch include the common headers to get the constants, add a small indirection. This is still not the proper way that would do this through the common clk API, but it lets us kill off the header file usage. Signed-off-by: Arnd Bergmann Acked-by: Viresh Kumar Link: https://lore.kernel.org/r/20200806182059.2431-37-krzk@kernel.org [krzk: Rebase and fix -Wold-style-definition] Signed-off-by: Krzysztof Kozlowski --- include/linux/soc/samsung/s3c-cpufreq-core.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux/soc') diff --git a/include/linux/soc/samsung/s3c-cpufreq-core.h b/include/linux/soc/samsung/s3c-cpufreq-core.h index e0c7217a0f53..3b278afb769b 100644 --- a/include/linux/soc/samsung/s3c-cpufreq-core.h +++ b/include/linux/soc/samsung/s3c-cpufreq-core.h @@ -289,4 +289,11 @@ static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table, return index + 1; } +u32 s3c2440_read_camdivn(void); +void s3c2440_write_camdivn(u32 camdiv); +u32 s3c24xx_read_clkdivn(void); +void s3c24xx_write_clkdivn(u32 clkdiv); +u32 s3c24xx_read_mpllcon(void); +void s3c24xx_write_locktime(u32 locktime); + #endif -- cgit v1.2.3