From a769154c7cac037914ba375ae88aae55b2c853e0 Mon Sep 17 00:00:00 2001 From: Hardik Gajjar Date: Fri, 27 Oct 2023 17:20:28 +0200 Subject: usb: xhci: Add timeout argument in address_device USB HCD callback - The HCD address_device callback now accepts a user-defined timeout value in milliseconds, providing better control over command execution times. - The default timeout value for the address_device command has been set to 5000 ms, aligning with the USB 3.2 specification. However, this timeout can be adjusted as needed. - The xhci_setup_device function has been updated to accept the timeout value, allowing it to specify the maximum wait time for the command operation to complete. - The hub driver has also been updated to accommodate the newly added timeout parameter during the SET_ADDRESS request. Signed-off-by: Hardik Gajjar Reviewed-by: Mathias Nyman Link: https://lore.kernel.org/r/20231027152029.104363-1-hgajjar@de.adit-jv.com Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/hcd.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include/linux/usb') diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index 00724b4f6e12..cd77fc6095a1 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -372,8 +372,9 @@ struct hc_driver { * or bandwidth constraints. */ void (*reset_bandwidth)(struct usb_hcd *, struct usb_device *); - /* Returns the hardware-chosen device address */ - int (*address_device)(struct usb_hcd *, struct usb_device *udev); + /* Set the hardware-chosen device address */ + int (*address_device)(struct usb_hcd *, struct usb_device *udev, + unsigned int timeout_ms); /* prepares the hardware to send commands to the device */ int (*enable_device)(struct usb_hcd *, struct usb_device *udev); /* Notifies the HCD after a hub descriptor is fetched. -- cgit v1.2.3 From 5a1ccf0c72cf917ff3ccc131d1bb8d19338ffe52 Mon Sep 17 00:00:00 2001 From: Hardik Gajjar Date: Fri, 27 Oct 2023 17:20:29 +0200 Subject: usb: new quirk to reduce the SET_ADDRESS request timeout This patch introduces a new USB quirk, USB_QUIRK_SHORT_SET_ADDRESS_REQ_TIMEOUT, which modifies the timeout value for the SET_ADDRESS request. The standard timeout for USB request/command is 5000 ms, as recommended in the USB 3.2 specification (section 9.2.6.1). However, certain scenarios, such as connecting devices through an APTIV hub, can lead to timeout errors when the device enumerates as full speed initially and later switches to high speed during chirp negotiation. In such cases, USB analyzer logs reveal that the bus suspends for 5 seconds due to incorrect chirp parsing and resumes only after two consecutive timeout errors trigger a hub driver reset. Packet(54) Dir(?) Full Speed J(997.100 us) Idle( 2.850 us) _______| Time Stamp(28 . 105 910 682) _______|_____________________________________________________________Ch0 Packet(55) Dir(?) Full Speed J(997.118 us) Idle( 2.850 us) _______| Time Stamp(28 . 106 910 632) _______|_____________________________________________________________Ch0 Packet(56) Dir(?) Full Speed J(399.650 us) Idle(222.582 us) _______| Time Stamp(28 . 107 910 600) _______|_____________________________________________________________Ch0 Packet(57) Dir Chirp J( 23.955 ms) Idle(115.169 ms) _______| Time Stamp(28 . 108 532 832) _______|_____________________________________________________________Ch0 Packet(58) Dir(?) Full Speed J (Suspend)( 5.347 sec) Idle( 5.366 us) _______| Time Stamp(28 . 247 657 600) _______|_____________________________________________________________Ch0 This 5-second delay in device enumeration is undesirable, particularly in automotive applications where quick enumeration is crucial (ideally within 3 seconds). The newly introduced quirks provide the flexibility to align with a 3-second time limit, as required in specific contexts like automotive applications. By reducing the SET_ADDRESS request timeout to 500 ms, the system can respond more swiftly to errors, initiate rapid recovery, and ensure efficient device enumeration. This change is vital for scenarios where rapid smartphone enumeration and screen projection are essential. To use the quirk, please write "vendor_id:product_id:p" to /sys/bus/usb/drivers/hub/module/parameter/quirks For example, echo "0x2c48:0x0132:p" > /sys/bus/usb/drivers/hub/module/parameters/quirks" Signed-off-by: Hardik Gajjar Reviewed-by: Alan Stern Link: https://lore.kernel.org/r/20231027152029.104363-2-hgajjar@de.adit-jv.com Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/quirks.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux/usb') diff --git a/include/linux/usb/quirks.h b/include/linux/usb/quirks.h index eeb7c2157c72..59409c1fc3de 100644 --- a/include/linux/usb/quirks.h +++ b/include/linux/usb/quirks.h @@ -72,4 +72,7 @@ /* device has endpoints that should be ignored */ #define USB_QUIRK_ENDPOINT_IGNORE BIT(15) +/* short SET_ADDRESS request timeout */ +#define USB_QUIRK_SHORT_SET_ADDRESS_REQ_TIMEOUT BIT(16) + #endif /* __LINUX_USB_QUIRKS_H */ -- cgit v1.2.3 From db9e54709895241dda23f9347f619afb15291353 Mon Sep 17 00:00:00 2001 From: RD Babiera Date: Tue, 21 Nov 2023 20:38:47 +0000 Subject: usb: typec: tcpm: add tcpm_port_error_recovery symbol Add tcpm_port_error_recovery symbol and corresponding event that runs in tcpm_pd_event handler to set the port to the ERROR_RECOVERY state. tcpci drivers can use the symbol to reset the port when tcpc faults affect port functionality. Signed-off-by: RD Babiera Reviewed-by: Heikki Krogerus Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20231121203845.170234-5-rdbabiera@google.com Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/tcpm.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/usb') diff --git a/include/linux/usb/tcpm.h b/include/linux/usb/tcpm.h index ab7ca872950b..65fac5e1f317 100644 --- a/include/linux/usb/tcpm.h +++ b/include/linux/usb/tcpm.h @@ -173,5 +173,6 @@ void tcpm_pd_hard_reset(struct tcpm_port *port); void tcpm_tcpc_reset(struct tcpm_port *port); void tcpm_port_clean(struct tcpm_port *port); bool tcpm_port_is_toggling(struct tcpm_port *port); +void tcpm_port_error_recovery(struct tcpm_port *port); #endif /* __LINUX_USB_TCPM_H */ -- cgit v1.2.3 From 5e4c8814a431d21bfaf20b464134f40f2f81e152 Mon Sep 17 00:00:00 2001 From: RD Babiera Date: Tue, 21 Nov 2023 20:38:48 +0000 Subject: usb: typec: tcpci: add vconn over current fault handling to maxim_core Add TCPC_FAULT_STATUS_VCONN_OC constant and corresponding mask definition. Maxim TCPC is capable of detecting VConn over current faults, so add fault to alert mask. When a Vconn over current fault is triggered, put the port in an error recovery state via tcpm_port_error_recovery. Signed-off-by: RD Babiera Reviewed-by: Guenter Roeck Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20231121203845.170234-6-rdbabiera@google.com Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/tcpci.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include/linux/usb') diff --git a/include/linux/usb/tcpci.h b/include/linux/usb/tcpci.h index 83376473ac76..467e8045e9f8 100644 --- a/include/linux/usb/tcpci.h +++ b/include/linux/usb/tcpci.h @@ -36,7 +36,9 @@ #define TCPC_ALERT_MASK 0x12 #define TCPC_POWER_STATUS_MASK 0x14 -#define TCPC_FAULT_STATUS_MASK 0x15 + +#define TCPC_FAULT_STATUS_MASK 0x15 +#define TCPC_FAULT_STATUS_MASK_VCONN_OC BIT(1) #define TCPC_EXTENDED_STATUS_MASK 0x16 #define TCPC_EXTENDED_STATUS_MASK_VSAFE0V BIT(0) @@ -104,6 +106,7 @@ #define TCPC_FAULT_STATUS 0x1f #define TCPC_FAULT_STATUS_ALL_REG_RST_TO_DEFAULT BIT(7) +#define TCPC_FAULT_STATUS_VCONN_OC BIT(1) #define TCPC_ALERT_EXTENDED 0x21 -- cgit v1.2.3 From 7037d95a047cd89b1f680eed253c6ab586bef1ed Mon Sep 17 00:00:00 2001 From: Kelly Kane Date: Sat, 2 Dec 2023 17:17:12 -0800 Subject: r8152: add vendor/device ID pair for ASUS USB-C2500 The ASUS USB-C2500 is an RTL8156 based 2.5G Ethernet controller. Add the vendor and product ID values to the driver. This makes Ethernet work with the adapter. Signed-off-by: Kelly Kane Link: https://lore.kernel.org/r/20231203011712.6314-1-kelly@hawknetworks.com Signed-off-by: Paolo Abeni --- include/linux/usb/r8152.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/usb') diff --git a/include/linux/usb/r8152.h b/include/linux/usb/r8152.h index 287e9d83fb8b..33a4c146dc19 100644 --- a/include/linux/usb/r8152.h +++ b/include/linux/usb/r8152.h @@ -30,6 +30,7 @@ #define VENDOR_ID_NVIDIA 0x0955 #define VENDOR_ID_TPLINK 0x2357 #define VENDOR_ID_DLINK 0x2001 +#define VENDOR_ID_ASUS 0x0b05 #if IS_REACHABLE(CONFIG_USB_RTL8152) extern u8 rtl8152_get_version(struct usb_interface *intf); -- cgit v1.2.3 From 398aa9a7e77cf23c2a6f882ddd3dcd96f21771dc Mon Sep 17 00:00:00 2001 From: Manan Aurora Date: Tue, 31 Oct 2023 03:46:41 +0000 Subject: usb: dwc3: Support EBC feature of DWC_usb31 Support configuration and use of bulk endpoints in the so-called EBC mode described in the DBC_usb31 databook (appendix E) Added a bit fifo_mode to usb_ep to indicate to the UDC driver that a specific endpoint is to operate in the EBC (or equivalent) mode when enabled Added macros for bits 15 and 14 of DEPCFG parameter 1 to indicate EBC mode and write back behaviour. These bits will be set to 1 when configuring an EBC endpoint as described in the programming guide Signed-off-by: Manan Aurora Link: https://lore.kernel.org/r/20231031034641.660606-1-maurora@google.com Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/gadget.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/usb') diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 6532beb587b1..a771ccc038ac 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -236,6 +236,7 @@ struct usb_ep { unsigned max_streams:16; unsigned mult:2; unsigned maxburst:5; + unsigned fifo_mode:1; u8 address; const struct usb_endpoint_descriptor *desc; const struct usb_ss_ep_comp_descriptor *comp_desc; -- cgit v1.2.3