From 0af36739af81f152cc24a0fdfa0754ef657afe3d Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 24 Jul 2008 17:27:57 -0700 Subject: usb: move ehci reg def prepare x86: usb debug port early console move ehci struct def to linux/usrb/ehci_def.h from host/ehci.h Signed-off-by: Yinghai Lu Acked-by: David Brownell Cc: Andrew Morton Cc: Andi Kleen Cc: "Arjan van de Ven" Cc: "Eric W. Biederman" Cc: "Greg KH" Signed-off-by: Ingo Molnar --- include/linux/usb/ehci_def.h | 160 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 160 insertions(+) create mode 100644 include/linux/usb/ehci_def.h (limited to 'include/linux/usb') diff --git a/include/linux/usb/ehci_def.h b/include/linux/usb/ehci_def.h new file mode 100644 index 000000000000..5b88e36c9103 --- /dev/null +++ b/include/linux/usb/ehci_def.h @@ -0,0 +1,160 @@ +/* + * Copyright (c) 2001-2002 by David Brownell + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __LINUX_USB_EHCI_DEF_H +#define __LINUX_USB_EHCI_DEF_H + +/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */ + +/* Section 2.2 Host Controller Capability Registers */ +struct ehci_caps { + /* these fields are specified as 8 and 16 bit registers, + * but some hosts can't perform 8 or 16 bit PCI accesses. + */ + u32 hc_capbase; +#define HC_LENGTH(p) (((p)>>00)&0x00ff) /* bits 7:0 */ +#define HC_VERSION(p) (((p)>>16)&0xffff) /* bits 31:16 */ + u32 hcs_params; /* HCSPARAMS - offset 0x4 */ +#define HCS_DEBUG_PORT(p) (((p)>>20)&0xf) /* bits 23:20, debug port? */ +#define HCS_INDICATOR(p) ((p)&(1 << 16)) /* true: has port indicators */ +#define HCS_N_CC(p) (((p)>>12)&0xf) /* bits 15:12, #companion HCs */ +#define HCS_N_PCC(p) (((p)>>8)&0xf) /* bits 11:8, ports per CC */ +#define HCS_PORTROUTED(p) ((p)&(1 << 7)) /* true: port routing */ +#define HCS_PPC(p) ((p)&(1 << 4)) /* true: port power control */ +#define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */ + + u32 hcc_params; /* HCCPARAMS - offset 0x8 */ +#define HCC_EXT_CAPS(p) (((p)>>8)&0xff) /* for pci extended caps */ +#define HCC_ISOC_CACHE(p) ((p)&(1 << 7)) /* true: can cache isoc frame */ +#define HCC_ISOC_THRES(p) (((p)>>4)&0x7) /* bits 6:4, uframes cached */ +#define HCC_CANPARK(p) ((p)&(1 << 2)) /* true: can park on async qh */ +#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1)) /* true: periodic_size changes*/ +#define HCC_64BIT_ADDR(p) ((p)&(1)) /* true: can use 64-bit addr */ + u8 portroute [8]; /* nibbles for routing - offset 0xC */ +} __attribute__ ((packed)); + + +/* Section 2.3 Host Controller Operational Registers */ +struct ehci_regs { + + /* USBCMD: offset 0x00 */ + u32 command; +/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */ +#define CMD_PARK (1<<11) /* enable "park" on async qh */ +#define CMD_PARK_CNT(c) (((c)>>8)&3) /* how many transfers to park for */ +#define CMD_LRESET (1<<7) /* partial reset (no ports, etc) */ +#define CMD_IAAD (1<<6) /* "doorbell" interrupt async advance */ +#define CMD_ASE (1<<5) /* async schedule enable */ +#define CMD_PSE (1<<4) /* periodic schedule enable */ +/* 3:2 is periodic frame list size */ +#define CMD_RESET (1<<1) /* reset HC not bus */ +#define CMD_RUN (1<<0) /* start/stop HC */ + + /* USBSTS: offset 0x04 */ + u32 status; +#define STS_ASS (1<<15) /* Async Schedule Status */ +#define STS_PSS (1<<14) /* Periodic Schedule Status */ +#define STS_RECL (1<<13) /* Reclamation */ +#define STS_HALT (1<<12) /* Not running (any reason) */ +/* some bits reserved */ + /* these STS_* flags are also intr_enable bits (USBINTR) */ +#define STS_IAA (1<<5) /* Interrupted on async advance */ +#define STS_FATAL (1<<4) /* such as some PCI access errors */ +#define STS_FLR (1<<3) /* frame list rolled over */ +#define STS_PCD (1<<2) /* port change detect */ +#define STS_ERR (1<<1) /* "error" completion (overflow, ...) */ +#define STS_INT (1<<0) /* "normal" completion (short, ...) */ + + /* USBINTR: offset 0x08 */ + u32 intr_enable; + + /* FRINDEX: offset 0x0C */ + u32 frame_index; /* current microframe number */ + /* CTRLDSSEGMENT: offset 0x10 */ + u32 segment; /* address bits 63:32 if needed */ + /* PERIODICLISTBASE: offset 0x14 */ + u32 frame_list; /* points to periodic list */ + /* ASYNCLISTADDR: offset 0x18 */ + u32 async_next; /* address of next async queue head */ + + u32 reserved [9]; + + /* CONFIGFLAG: offset 0x40 */ + u32 configured_flag; +#define FLAG_CF (1<<0) /* true: we'll support "high speed" */ + + /* PORTSC: offset 0x44 */ + u32 port_status [0]; /* up to N_PORTS */ +/* 31:23 reserved */ +#define PORT_WKOC_E (1<<22) /* wake on overcurrent (enable) */ +#define PORT_WKDISC_E (1<<21) /* wake on disconnect (enable) */ +#define PORT_WKCONN_E (1<<20) /* wake on connect (enable) */ +/* 19:16 for port testing */ +#define PORT_LED_OFF (0<<14) +#define PORT_LED_AMBER (1<<14) +#define PORT_LED_GREEN (2<<14) +#define PORT_LED_MASK (3<<14) +#define PORT_OWNER (1<<13) /* true: companion hc owns this port */ +#define PORT_POWER (1<<12) /* true: has power (see PPC) */ +#define PORT_USB11(x) (((x)&(3<<10)) == (1<<10)) /* USB 1.1 device */ +/* 11:10 for detecting lowspeed devices (reset vs release ownership) */ +/* 9 reserved */ +#define PORT_RESET (1<<8) /* reset port */ +#define PORT_SUSPEND (1<<7) /* suspend port */ +#define PORT_RESUME (1<<6) /* resume it */ +#define PORT_OCC (1<<5) /* over current change */ +#define PORT_OC (1<<4) /* over current active */ +#define PORT_PEC (1<<3) /* port enable change */ +#define PORT_PE (1<<2) /* port enable */ +#define PORT_CSC (1<<1) /* connect status change */ +#define PORT_CONNECT (1<<0) /* device connected */ +#define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC) +} __attribute__ ((packed)); + +#define USBMODE 0x68 /* USB Device mode */ +#define USBMODE_SDIS (1<<3) /* Stream disable */ +#define USBMODE_BE (1<<2) /* BE/LE endianness select */ +#define USBMODE_CM_HC (3<<0) /* host controller mode */ +#define USBMODE_CM_IDLE (0<<0) /* idle state */ + +/* Appendix C, Debug port ... intended for use with special "debug devices" + * that can help if there's no serial console. (nonstandard enumeration.) + */ +struct ehci_dbg_port { + u32 control; +#define DBGP_OWNER (1<<30) +#define DBGP_ENABLED (1<<28) +#define DBGP_DONE (1<<16) +#define DBGP_INUSE (1<<10) +#define DBGP_ERRCODE(x) (((x)>>7)&0x07) +# define DBGP_ERR_BAD 1 +# define DBGP_ERR_SIGNAL 2 +#define DBGP_ERROR (1<<6) +#define DBGP_GO (1<<5) +#define DBGP_OUT (1<<4) +#define DBGP_LEN(x) (((x)>>0)&0x0f) + u32 pids; +#define DBGP_PID_GET(x) (((x)>>16)&0xff) +#define DBGP_PID_SET(data, tok) (((data)<<8)|(tok)) + u32 data03; + u32 data47; + u32 address; +#define DBGP_EPADDR(dev, ep) (((dev)<<8)|(ep)) +} __attribute__ ((packed)); + +#endif /* __LINUX_USB_EHCI_DEF_H */ -- cgit v1.2.3 From 5b775f672cc993ba9dba5626811ab1f2ac42883b Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 26 Aug 2008 16:22:06 -0700 Subject: USB: add USB test and measurement class driver This driver was originaly written by Stefan Kopp, but massively reworked by Greg for submission. Thanks to Felipe Balbi for lots of work in cleaning up this driver. Thanks to Oliver Neukum for reviewing previous versions and pointing out problems. Cc: Stefan Kopp Cc: Marcel Janssen Cc: Felipe Balbi Cc: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/Kbuild | 2 +- include/linux/usb/tmc.h | 43 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 44 insertions(+), 1 deletion(-) create mode 100644 include/linux/usb/tmc.h (limited to 'include/linux/usb') diff --git a/include/linux/usb/Kbuild b/include/linux/usb/Kbuild index 42e84fc315e3..29fd73b0bffc 100644 --- a/include/linux/usb/Kbuild +++ b/include/linux/usb/Kbuild @@ -4,4 +4,4 @@ header-y += ch9.h header-y += gadgetfs.h header-y += midi.h header-y += g_printer.h - +header-y += tmc.h diff --git a/include/linux/usb/tmc.h b/include/linux/usb/tmc.h new file mode 100644 index 000000000000..c045ae12556c --- /dev/null +++ b/include/linux/usb/tmc.h @@ -0,0 +1,43 @@ +/* + * Copyright (C) 2007 Stefan Kopp, Gechingen, Germany + * Copyright (C) 2008 Novell, Inc. + * Copyright (C) 2008 Greg Kroah-Hartman + * + * This file holds USB constants defined by the USB Device Class + * Definition for Test and Measurement devices published by the USB-IF. + * + * It also has the ioctl definitions for the usbtmc kernel driver that + * userspace needs to know about. + */ + +#ifndef __LINUX_USB_TMC_H +#define __LINUX_USB_TMC_H + +/* USB TMC status values */ +#define USBTMC_STATUS_SUCCESS 0x01 +#define USBTMC_STATUS_PENDING 0x02 +#define USBTMC_STATUS_FAILED 0x80 +#define USBTMC_STATUS_TRANSFER_NOT_IN_PROGRESS 0x81 +#define USBTMC_STATUS_SPLIT_NOT_IN_PROGRESS 0x82 +#define USBTMC_STATUS_SPLIT_IN_PROGRESS 0x83 + +/* USB TMC requests values */ +#define USBTMC_REQUEST_INITIATE_ABORT_BULK_OUT 1 +#define USBTMC_REQUEST_CHECK_ABORT_BULK_OUT_STATUS 2 +#define USBTMC_REQUEST_INITIATE_ABORT_BULK_IN 3 +#define USBTMC_REQUEST_CHECK_ABORT_BULK_IN_STATUS 4 +#define USBTMC_REQUEST_INITIATE_CLEAR 5 +#define USBTMC_REQUEST_CHECK_CLEAR_STATUS 6 +#define USBTMC_REQUEST_GET_CAPABILITIES 7 +#define USBTMC_REQUEST_INDICATOR_PULSE 64 + +/* Request values for USBTMC driver's ioctl entry point */ +#define USBTMC_IOC_NR 91 +#define USBTMC_IOCTL_INDICATOR_PULSE _IO(USBTMC_IOC_NR, 1) +#define USBTMC_IOCTL_CLEAR _IO(USBTMC_IOC_NR, 2) +#define USBTMC_IOCTL_ABORT_BULK_OUT _IO(USBTMC_IOC_NR, 3) +#define USBTMC_IOCTL_ABORT_BULK_IN _IO(USBTMC_IOC_NR, 4) +#define USBTMC_IOCTL_CLEAR_OUT_HALT _IO(USBTMC_IOC_NR, 6) +#define USBTMC_IOCTL_CLEAR_IN_HALT _IO(USBTMC_IOC_NR, 7) + +#endif -- cgit v1.2.3 From 60beed95e38793c0baff7f94433c1f639d8d5efd Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 18 Aug 2008 17:38:22 -0700 Subject: usb gadget: function activation/deactivation Add a new mechanism to the composite gadget framework, letting functions deactivate (and reactivate) themselves. Think of it as a refcounted wrapper for the software pullup control. A key example of why to use this mechanism involves functions that require a userspace daemon. Those functions shuld use this new mechanism to prevent the gadget from enumerating until those daemons are activated. Without this mechanism, hosts would see devices that malfunction until the relevant daemons start. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/composite.h | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'include/linux/usb') diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index c932390c6da0..935c380ffe47 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -130,6 +130,9 @@ struct usb_function { int usb_add_function(struct usb_configuration *, struct usb_function *); +int usb_function_deactivate(struct usb_function *); +int usb_function_activate(struct usb_function *); + int usb_interface_id(struct usb_configuration *, struct usb_function *); /** @@ -316,9 +319,13 @@ struct usb_composite_dev { struct usb_composite_driver *driver; u8 next_string_id; - spinlock_t lock; + /* the gadget driver won't enable the data pullup + * while the deactivation count is nonzero. + */ + unsigned deactivations; - /* REVISIT use and existence of lock ... */ + /* protects at least deactivation count */ + spinlock_t lock; }; extern int usb_string_id(struct usb_composite_dev *c); -- cgit v1.2.3 From 3086775a4916b0fe128d924d83f4e7d7c39e4d0e Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Mon, 18 Aug 2008 17:39:30 -0700 Subject: usb gadget: cdc obex glue The following patch introduces a new f_obex.c function driver. It allows userspace obex servers to use usb as transport layer for their messages. [ dbrownell@users.sourceforge.net: various fixes and cleanups ] Signed-off-by: Felipe Balbi Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/cdc.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/linux/usb') diff --git a/include/linux/usb/cdc.h b/include/linux/usb/cdc.h index ca228bb94218..18a729343ffa 100644 --- a/include/linux/usb/cdc.h +++ b/include/linux/usb/cdc.h @@ -160,6 +160,15 @@ struct usb_cdc_mdlm_detail_desc { __u8 bDetailData[0]; } __attribute__ ((packed)); +/* "OBEX Control Model Functional Descriptor" */ +struct usb_cdc_obex_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __le16 bcdVersion; +} __attribute__ ((packed)); + /*-------------------------------------------------------------------------*/ /* -- cgit v1.2.3 From 0b14c3881d4b91272b779f4037e263d392de058f Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Sat, 20 Sep 2008 14:41:47 -0700 Subject: USB: Fix spelling in usb/serial.h Fixes a minor typo in the comments for usb_set_serial_data. Signed-off-by: Geoff Levand Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/serial.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux/usb') diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index 655341d0f534..0b8617a9176d 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -192,7 +192,7 @@ static inline void usb_set_serial_data(struct usb_serial *serial, void *data) * The driver.owner field should be set to the module owner of this driver. * The driver.name field should be set to the name of this driver (remember * it will show up in sysfs, so it needs to be short and to the point. - * Useing the module name is a good idea.) + * Using the module name is a good idea.) */ struct usb_serial_driver { const char *description; -- cgit v1.2.3 From cbc30118d7a376dab4113f299c0c8f035737a5c3 Mon Sep 17 00:00:00 2001 From: Stephen Ware Date: Tue, 30 Sep 2008 11:39:38 -0700 Subject: usb: vstusb.c : new driver for spectrometers used by Vernier Software & Technology, Inc. This patch adds the vstusb driver to the drivers/usb/misc directory. This driver provides support for Vernier Software & Technology spectrometers, all made by Ocean Optics. The driver provides both IOCTL and read()/write() methods for sending raw data to spectrometers across the bulk channel. Each method allows for a configured timeout. From: Stephen Ware Signed-off-by: Dennis O'Brien Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/Kbuild | 1 + include/linux/usb/vstusb.h | 71 ++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 72 insertions(+) create mode 100644 include/linux/usb/vstusb.h (limited to 'include/linux/usb') diff --git a/include/linux/usb/Kbuild b/include/linux/usb/Kbuild index 29fd73b0bffc..54c446309a2a 100644 --- a/include/linux/usb/Kbuild +++ b/include/linux/usb/Kbuild @@ -5,3 +5,4 @@ header-y += gadgetfs.h header-y += midi.h header-y += g_printer.h header-y += tmc.h +header-y += vstusb.h diff --git a/include/linux/usb/vstusb.h b/include/linux/usb/vstusb.h new file mode 100644 index 000000000000..1cfac67191ff --- /dev/null +++ b/include/linux/usb/vstusb.h @@ -0,0 +1,71 @@ +/***************************************************************************** + * File: drivers/usb/misc/vstusb.h + * + * Purpose: Support for the bulk USB Vernier Spectrophotometers + * + * Author: EQware Engineering, Inc. + * Oregon City, OR, USA 97045 + * + * Copyright: 2007, 2008 + * Vernier Software & Technology + * Beaverton, OR, USA 97005 + * + * Web: www.vernier.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + *****************************************************************************/ +/***************************************************************************** + * + * The vstusb module is a standard usb 'client' driver running on top of the + * standard usb host controller stack. + * + * In general, vstusb supports standard bulk usb pipes. It supports multiple + * devices and multiple pipes per device. + * + * The vstusb driver supports two interfaces: + * 1 - ioctl SEND_PIPE/RECV_PIPE - a general bulk write/read msg + * interface to any pipe with timeout support; + * 2 - standard read/write with ioctl config - offers standard read/write + * interface with ioctl configured pipes and timeouts. + * + * Both interfaces can be signal from other process and will abort its i/o + * operation. + * + * A timeout of 0 means NO timeout. The user can still terminate the read via + * signal. + * + * If using multiple threads with this driver, the user should ensure that + * any reads, writes, or ioctls are complete before closing the device. + * Changing read/write timeouts or pipes takes effect on next read/write. + * + *****************************************************************************/ + +struct vstusb_args { + union { + /* this struct is used for IOCTL_VSTUSB_SEND_PIPE, * + * IOCTL_VSTUSB_RECV_PIPE, and read()/write() fops */ + struct { + void __user *buffer; + size_t count; + unsigned int timeout_ms; + int pipe; + }; + + /* this one is used for IOCTL_VSTUSB_CONFIG_RW */ + struct { + int rd_pipe; + int rd_timeout_ms; + int wr_pipe; + int wr_timeout_ms; + }; + }; +}; + +#define VST_IOC_MAGIC 'L' +#define VST_IOC_FIRST 0x20 +#define IOCTL_VSTUSB_SEND_PIPE _IO(VST_IOC_MAGIC, VST_IOC_FIRST) +#define IOCTL_VSTUSB_RECV_PIPE _IO(VST_IOC_MAGIC, VST_IOC_FIRST + 1) +#define IOCTL_VSTUSB_CONFIG_RW _IO(VST_IOC_MAGIC, VST_IOC_FIRST + 2) -- cgit v1.2.3