From cf1c4a094f46ace5bf00078e2db73491ddf018fe Mon Sep 17 00:00:00 2001 From: Josh Hunt Date: Tue, 19 Feb 2013 11:35:59 -0800 Subject: netfilter: ipset: timeout values corrupted on set resize If a resize is triggered on a set with timeouts enabled, the timeout values will get corrupted when copying them to the new set. This occured b/c the wrong timeout value is supplied to type_pf_elem_tadd(). This also adds simple debug statement similar to the one in type_pf_resize(). Signed-off-by: Josh Hunt Signed-off-by: Jozsef Kadlecsik --- include/linux/netfilter/ipset/ip_set_ahash.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/netfilter/ipset/ip_set_ahash.h b/include/linux/netfilter/ipset/ip_set_ahash.h index ef9acd3c8450..01d25e6fc792 100644 --- a/include/linux/netfilter/ipset/ip_set_ahash.h +++ b/include/linux/netfilter/ipset/ip_set_ahash.h @@ -854,6 +854,8 @@ type_pf_tresize(struct ip_set *set, bool retried) retry: ret = 0; htable_bits++; + pr_debug("attempt to resize set %s from %u to %u, t %p\n", + set->name, orig->htable_bits, htable_bits, orig); if (!htable_bits) { /* In case we have plenty of memory :-) */ pr_warning("Cannot increase the hashsize of set %s further\n", @@ -873,7 +875,7 @@ retry: data = ahash_tdata(n, j); m = hbucket(t, HKEY(data, h->initval, htable_bits)); ret = type_pf_elem_tadd(m, data, AHASH_MAX(h), 0, - type_pf_data_timeout(data)); + ip_set_timeout_get(type_pf_data_timeout(data))); if (ret < 0) { read_unlock_bh(&set->lock); ahash_destroy(t); -- cgit v1.2.3 From 4d4c4e24cf48400a24d33feffc7cca4f4e8cabe1 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Fri, 22 Feb 2013 00:05:07 +0100 Subject: irq: Remove IRQ_EXIT_OFFSET workaround The IRQ_EXIT_OFFSET trick was used to make sure the irq doesn't get preempted after we substract the HARDIRQ_OFFSET until we are entirely done with any code in irq_exit(). This workaround was necessary because some archs may call irq_exit() with irqs enabled and there is still some code in the end of this function that is not covered by the HARDIRQ_OFFSET but want to stay non-preemptible. Now that irq are always disabled in irq_exit(), the whole code is guaranteed not to be preempted. We can thus remove this hack. Signed-off-by: Frederic Weisbecker Cc: Linus Torvalds Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Peter Zijlstra Cc: Paul E. McKenney --- include/linux/hardirq.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h index 29eb805ea4a6..c1d6555d2567 100644 --- a/include/linux/hardirq.h +++ b/include/linux/hardirq.h @@ -118,10 +118,8 @@ #ifdef CONFIG_PREEMPT_COUNT # define preemptible() (preempt_count() == 0 && !irqs_disabled()) -# define IRQ_EXIT_OFFSET (HARDIRQ_OFFSET-1) #else # define preemptible() 0 -# define IRQ_EXIT_OFFSET HARDIRQ_OFFSET #endif #if defined(CONFIG_SMP) || defined(CONFIG_GENERIC_HARDIRQS) -- cgit v1.2.3 From 46c498c2cdee5efe44f617bcd4f388179be36115 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 26 Feb 2013 18:44:33 +0100 Subject: stop_machine: Mark per cpu stopper enabled early commit 14e568e78 (stop_machine: Use smpboot threads) introduced the following regression: Before this commit the stopper enabled bit was set in the online notifier. CPU0 CPU1 cpu_up cpu online hotplug_notifier(ONLINE) stopper(CPU1)->enabled = true; ... stop_machine() The conversion to smpboot threads moved the enablement to the wakeup path of the parked thread. The majority of users seem to have the following working order: CPU0 CPU1 cpu_up cpu online unpark_threads() wakeup(stopper[CPU1]) .... stopper thread runs stopper(CPU1)->enabled = true; stop_machine() But Konrad and Sander have observed: CPU0 CPU1 cpu_up cpu online unpark_threads() wakeup(stopper[CPU1]) .... stop_machine() stopper thread runs stopper(CPU1)->enabled = true; Now the stop machinery kicks CPU0 into the stop loop, where it gets stuck forever because the queue code saw stopper(CPU1)->enabled == false, so CPU0 waits for CPU1 to enter stomp_machine, but the CPU1 stopper work got discarded due to enabled == false. Add a pre_unpark function to the smpboot thread descriptor and call it before waking the thread. This fixes the problem at hand, but the stop_machine code should be more robust. The stopper->enabled flag smells fishy at best. Thanks to Konrad for going through a loop of debug patches and providing the information to decode this issue. Reported-and-tested-by: Konrad Rzeszutek Wilk Reported-and-tested-by: Sander Eikelenboom Cc: Srivatsa S. Bhat Cc: Rusty Russell Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1302261843240.22263@ionos Signed-off-by: Thomas Gleixner --- include/linux/smpboot.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/smpboot.h b/include/linux/smpboot.h index c65dee059913..13e929679550 100644 --- a/include/linux/smpboot.h +++ b/include/linux/smpboot.h @@ -24,6 +24,9 @@ struct smpboot_thread_data; * parked (cpu offline) * @unpark: Optional unpark function, called when the thread is * unparked (cpu online) + * @pre_unpark: Optional unpark function, called before the thread is + * unparked (cpu online). This is not guaranteed to be + * called on the target cpu of the thread. Careful! * @selfparking: Thread is not parked by the park function. * @thread_comm: The base name of the thread */ @@ -37,6 +40,7 @@ struct smp_hotplug_thread { void (*cleanup)(unsigned int cpu, bool online); void (*park)(unsigned int cpu); void (*unpark)(unsigned int cpu); + void (*pre_unpark)(unsigned int cpu); bool selfparking; const char *thread_comm; }; -- cgit v1.2.3 From 5838b032fd69ae47565ddc50062decf9055e1628 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Thu, 28 Feb 2013 18:12:47 -0600 Subject: regulator: core: update kernel documentation for regulator_desc commit df367931 (regulator: core: Provide regmap get/set bypass operations) introduced regulator_[gs]et_bypass_regmap However structure documentation for regulator_desc needs an update. ./scripts/kernel-doc include/linux/regulator/driver.h >/dev/null generates: Warning(include/linux/regulator/driver.h:233): No description found for parameter 'bypass_reg' Warning(include/linux/regulator/driver.h:233): No description found for parameter 'bypass_mask' Cc: Liam Girdwood Cc: Mark Brown Cc: linux-kernel@vger.kernel.org Signed-off-by: Nishanth Menon Signed-off-by: Mark Brown --- include/linux/regulator/driver.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 23070fd83872..7df93f52db08 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -199,6 +199,8 @@ enum regulator_type { * output when using regulator_set_voltage_sel_regmap * @enable_reg: Register for control when using regmap enable/disable ops * @enable_mask: Mask for control when using regmap enable/disable ops + * @bypass_reg: Register for control when using regmap set_bypass + * @bypass_mask: Mask for control when using regmap set_bypass * * @enable_time: Time taken for initial enable of regulator (in uS). */ -- cgit v1.2.3 From 7f78e0351394052e1a6293e175825eb5c7869507 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Sat, 2 Mar 2013 19:39:14 -0800 Subject: fs: Limit sys_mount to only request filesystem modules. Modify the request_module to prefix the file system type with "fs-" and add aliases to all of the filesystems that can be built as modules to match. A common practice is to build all of the kernel code and leave code that is not commonly needed as modules, with the result that many users are exposed to any bug anywhere in the kernel. Looking for filesystems with a fs- prefix limits the pool of possible modules that can be loaded by mount to just filesystems trivially making things safer with no real cost. Using aliases means user space can control the policy of which filesystem modules are auto-loaded by editing /etc/modprobe.d/*.conf with blacklist and alias directives. Allowing simple, safe, well understood work-arounds to known problematic software. This also addresses a rare but unfortunate problem where the filesystem name is not the same as it's module name and module auto-loading would not work. While writing this patch I saw a handful of such cases. The most significant being autofs that lives in the module autofs4. This is relevant to user namespaces because we can reach the request module in get_fs_type() without having any special permissions, and people get uncomfortable when a user specified string (in this case the filesystem type) goes all of the way to request_module. After having looked at this issue I don't think there is any particular reason to perform any filtering or permission checks beyond making it clear in the module request that we want a filesystem module. The common pattern in the kernel is to call request_module() without regards to the users permissions. In general all a filesystem module does once loaded is call register_filesystem() and go to sleep. Which means there is not much attack surface exposed by loading a filesytem module unless the filesystem is mounted. In a user namespace filesystems are not mounted unless .fs_flags = FS_USERNS_MOUNT, which most filesystems do not set today. Acked-by: Serge Hallyn Acked-by: Kees Cook Reported-by: Kees Cook Signed-off-by: "Eric W. Biederman" --- include/linux/fs.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 74a907b8b950..2c28271ab9d4 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1825,6 +1825,8 @@ struct file_system_type { struct lock_class_key i_mutex_dir_key; }; +#define MODULE_ALIAS_FS(NAME) MODULE_ALIAS("fs-" NAME) + extern struct dentry *mount_ns(struct file_system_type *fs_type, int flags, void *data, int (*fill_super)(struct super_block *, void *, int)); extern struct dentry *mount_bdev(struct file_system_type *fs_type, -- cgit v1.2.3 From 290502bee239062499297916bb7d21d205e99d62 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Thu, 28 Feb 2013 00:39:37 -0800 Subject: eCryptfs: allow userspace messaging to be disabled When the userspace messaging (for the less common case of userspace key wrap/unwrap via ecryptfsd) is not needed, allow eCryptfs to build with it removed. This saves on kernel code size and reduces potential attack surface by removing the /dev/ecryptfs node. Signed-off-by: Kees Cook Signed-off-by: Tyler Hicks --- include/linux/ecryptfs.h | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ecryptfs.h b/include/linux/ecryptfs.h index 2224a8c0cb64..8d5ab998a222 100644 --- a/include/linux/ecryptfs.h +++ b/include/linux/ecryptfs.h @@ -6,9 +6,8 @@ #define ECRYPTFS_VERSION_MINOR 0x04 #define ECRYPTFS_SUPPORTED_FILE_VERSION 0x03 /* These flags indicate which features are supported by the kernel - * module; userspace tools such as the mount helper read - * ECRYPTFS_VERSIONING_MASK from a sysfs handle in order to determine - * how to behave. */ + * module; userspace tools such as the mount helper read the feature + * bits from a sysfs handle in order to determine how to behave. */ #define ECRYPTFS_VERSIONING_PASSPHRASE 0x00000001 #define ECRYPTFS_VERSIONING_PUBKEY 0x00000002 #define ECRYPTFS_VERSIONING_PLAINTEXT_PASSTHROUGH 0x00000004 @@ -19,13 +18,6 @@ #define ECRYPTFS_VERSIONING_HMAC 0x00000080 #define ECRYPTFS_VERSIONING_FILENAME_ENCRYPTION 0x00000100 #define ECRYPTFS_VERSIONING_GCM 0x00000200 -#define ECRYPTFS_VERSIONING_MASK (ECRYPTFS_VERSIONING_PASSPHRASE \ - | ECRYPTFS_VERSIONING_PLAINTEXT_PASSTHROUGH \ - | ECRYPTFS_VERSIONING_PUBKEY \ - | ECRYPTFS_VERSIONING_XATTR \ - | ECRYPTFS_VERSIONING_MULTKEY \ - | ECRYPTFS_VERSIONING_DEVMISC \ - | ECRYPTFS_VERSIONING_FILENAME_ENCRYPTION) #define ECRYPTFS_MAX_PASSWORD_LENGTH 64 #define ECRYPTFS_MAX_PASSPHRASE_BYTES ECRYPTFS_MAX_PASSWORD_LENGTH #define ECRYPTFS_SALT_SIZE 8 -- cgit v1.2.3 From 22dfab7fd7fd5a8a2c5556ca0a8fd35fc959abc8 Mon Sep 17 00:00:00 2001 From: Daniel Kurtz Date: Thu, 7 Mar 2013 19:43:33 -0800 Subject: Input: atmel_mxt_ts - Support for touchpad variant This same driver can be used by atmel based touchscreens and touchpads (buttonpads). Platform data may specify a device is a touchpad using the is_tp flag. This will cause the driver to perform some touchpad specific initializations, such as: * register input device name "Atmel maXTouch Touchpad" instead of Touchscreen. * register BTN_LEFT & BTN_TOOL_* event types. * register axis resolution (as a fixed constant, for now) * register BUTTONPAD property * process GPIO buttons using reportid T19 Input event GPIO mapping is done by the platform data key_map array. key_map[x] should contain the KEY or BTN code to send when processing GPIOx from T19. To specify a GPIO as not an input source, populate with KEY_RESERVED, or 0. Signed-off-by: Daniel Kurtz Signed-off-by: Benson Leung Signed-off-by: Nick Dyer Tested-by: Olof Johansson Signed-off-by: Linus Torvalds --- include/linux/i2c/atmel_mxt_ts.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/i2c/atmel_mxt_ts.h b/include/linux/i2c/atmel_mxt_ts.h index f027f7a63511..99e379b74398 100644 --- a/include/linux/i2c/atmel_mxt_ts.h +++ b/include/linux/i2c/atmel_mxt_ts.h @@ -15,6 +15,9 @@ #include +/* For key_map array */ +#define MXT_NUM_GPIO 4 + /* Orient */ #define MXT_NORMAL 0x0 #define MXT_DIAGONAL 0x1 @@ -39,6 +42,8 @@ struct mxt_platform_data { unsigned int voltage; unsigned char orient; unsigned long irqflags; + bool is_tp; + const unsigned int key_map[MXT_NUM_GPIO]; }; #endif /* __LINUX_ATMEL_MXT_TS_H */ -- cgit v1.2.3 From e0c25362384f4be9c755c98560cd4b1cdb2ec79c Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Sun, 10 Mar 2013 21:52:53 -0500 Subject: clocksource: add empty version of clocksource_of_init Add an empty clocksource_of_init when !CLKSRC_OF. This is needed for builds where no timer has selected CLKSRC_OF. Signed-off-by: Rob Herring Cc: John Stultz Cc: Thomas Gleixner --- include/linux/clocksource.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index 27cfda427dd9..08ed5e19d8c6 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -340,6 +340,7 @@ extern void clocksource_of_init(void); __used __section(__clksrc_of_table) \ = { .compatible = compat, .data = fn }; #else +static inline void clocksource_of_init(void) {} #define CLOCKSOURCE_OF_DECLARE(name, compat, fn) #endif -- cgit v1.2.3 From 3d5a96582303e28c48699f3faaf920ef7d43e6f2 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 19 Mar 2013 15:38:50 +0100 Subject: clocksource: make CLOCKSOURCE_OF_DECLARE type safe This ensures that a function pointer passed into CLOCKSOURCE_OF_DECLARE takes the same arguments that we use for calling that function later. Also fix the extraneous semicolon at end of the CLOCKSOURCE_OF_DECLARE definition. Signed-off-by: Arnd Bergmann Acked-by: Rob Herring --- include/linux/clocksource.h | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index 08ed5e19d8c6..192d6d1771ee 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -332,16 +332,23 @@ extern int clocksource_mmio_init(void __iomem *, const char *, extern int clocksource_i8253_init(void); +struct device_node; +typedef void(*clocksource_of_init_fn)(struct device_node *); #ifdef CONFIG_CLKSRC_OF extern void clocksource_of_init(void); #define CLOCKSOURCE_OF_DECLARE(name, compat, fn) \ static const struct of_device_id __clksrc_of_table_##name \ __used __section(__clksrc_of_table) \ - = { .compatible = compat, .data = fn }; + = { .compatible = compat, \ + .data = (fn == (clocksource_of_init_fn)NULL) ? fn : fn } #else static inline void clocksource_of_init(void) {} -#define CLOCKSOURCE_OF_DECLARE(name, compat, fn) +#define CLOCKSOURCE_OF_DECLARE(name, compat, fn) \ + static const struct of_device_id __clksrc_of_table_##name \ + __attribute__((unused)) \ + = { .compatible = compat, \ + .data = (fn == (clocksource_of_init_fn)NULL) ? fn : fn } #endif #endif /* _LINUX_CLOCKSOURCE_H */ -- cgit v1.2.3