From 0140e6141e4f1d4b15fb469e6912b0e71b7d1cc2 Mon Sep 17 00:00:00 2001 From: Sonny Rao Date: Tue, 21 Apr 2015 12:33:11 -0700 Subject: perf/x86/intel/uncore: Move PCI IDs for IMC to uncore driver This keeps all the related PCI IDs together in the driver where they are used. Signed-off-by: Sonny Rao Acked-by: Bjorn Helgaas Cc: Arnaldo Carvalho de Melo Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/r/1429644791-25724-1-git-send-email-sonnyrao@chromium.org Signed-off-by: Ingo Molnar --- include/linux/pci_ids.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index e63c02a93f6b..a59385852233 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2539,10 +2539,6 @@ #define PCI_VENDOR_ID_INTEL 0x8086 #define PCI_DEVICE_ID_INTEL_EESSC 0x0008 -#define PCI_DEVICE_ID_INTEL_SNB_IMC 0x0100 -#define PCI_DEVICE_ID_INTEL_IVB_IMC 0x0154 -#define PCI_DEVICE_ID_INTEL_IVB_E3_IMC 0x0150 -#define PCI_DEVICE_ID_INTEL_HSW_IMC 0x0c00 #define PCI_DEVICE_ID_INTEL_PXHD_0 0x0320 #define PCI_DEVICE_ID_INTEL_PXHD_1 0x0321 #define PCI_DEVICE_ID_INTEL_PXH_0 0x0329 -- cgit v1.2.3 From 03c57747a7020a28a200e7e920fb48ecdc9b0fb8 Mon Sep 17 00:00:00 2001 From: Robert Shearman Date: Wed, 22 Apr 2015 11:14:37 +0100 Subject: mpls: Per-device MPLS state Add per-device MPLS state to supported interfaces. Use the presence of this state in mpls_route_add to determine that this is a supported interface. Use the presence of mpls_dev to drop packets that arrived on an unsupported interface - previously they were allowed through. Cc: "Eric W. Biederman" Signed-off-by: Robert Shearman Reviewed-by: "Eric W. Biederman" Signed-off-by: David S. Miller --- include/linux/netdevice.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index bcbde799ec69..dae106a3a998 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -60,6 +60,7 @@ struct phy_device; struct wireless_dev; /* 802.15.4 specific */ struct wpan_dev; +struct mpls_dev; void netdev_set_default_ethtool_ops(struct net_device *dev, const struct ethtool_ops *ops); @@ -1627,6 +1628,9 @@ struct net_device { void *ax25_ptr; struct wireless_dev *ieee80211_ptr; struct wpan_dev *ieee802154_ptr; +#if IS_ENABLED(CONFIG_MPLS_ROUTING) + struct mpls_dev __rcu *mpls_ptr; +#endif /* * Cache lines mostly used on receive path (including eth_type_trans()) -- cgit v1.2.3 From 7e01b5acd88b3f3108d8c4ce44e3205d67437202 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Thu, 16 Apr 2015 14:47:33 +0200 Subject: kexec: allocate the kexec control page with KEXEC_CONTROL_MEMORY_GFP Introduce KEXEC_CONTROL_MEMORY_GFP to allow the architecture code to override the gfp flags of the allocation for the kexec control page. The loop in kimage_alloc_normal_control_pages allocates pages with GFP_KERNEL until a page is found that happens to have an address smaller than the KEXEC_CONTROL_MEMORY_LIMIT. On systems with a large memory size but a small KEXEC_CONTROL_MEMORY_LIMIT the loop will keep allocating memory until the oom killer steps in. Signed-off-by: Martin Schwidefsky --- include/linux/kexec.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/kexec.h b/include/linux/kexec.h index e60a745ac198..e804306ef5e8 100644 --- a/include/linux/kexec.h +++ b/include/linux/kexec.h @@ -40,6 +40,10 @@ #error KEXEC_CONTROL_MEMORY_LIMIT not defined #endif +#ifndef KEXEC_CONTROL_MEMORY_GFP +#define KEXEC_CONTROL_MEMORY_GFP GFP_KERNEL +#endif + #ifndef KEXEC_CONTROL_PAGE_SIZE #error KEXEC_CONTROL_PAGE_SIZE not defined #endif -- cgit v1.2.3 From ec65aafb9e3f316ff9167289e288856a7d528773 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 23 Apr 2015 12:06:30 +0200 Subject: netdev_alloc_pcpu_stats: use less common iterator variable With the CPU iteration variable called 'i', it's relatively easy to have variable shadowing which sparse will warn about. Avoid that by renaming the variable to __cpu which is less likely to be used in the surrounding context. Signed-off-by: Johannes Berg Signed-off-by: David S. Miller --- include/linux/netdevice.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index dae106a3a998..dbad4d728b4b 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2025,10 +2025,10 @@ struct pcpu_sw_netstats { ({ \ typeof(type) __percpu *pcpu_stats = alloc_percpu(type); \ if (pcpu_stats) { \ - int i; \ - for_each_possible_cpu(i) { \ + int __cpu; \ + for_each_possible_cpu(__cpu) { \ typeof(type) *stat; \ - stat = per_cpu_ptr(pcpu_stats, i); \ + stat = per_cpu_ptr(pcpu_stats, __cpu); \ u64_stats_init(&stat->syncp); \ } \ } \ -- cgit v1.2.3 From 1d8dc3d3c8f1d8ee1da9d54c5d7c8694419ade42 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 23 Apr 2015 16:38:43 +0200 Subject: rhashtable: don't attempt to grow when at max_size The conversion of mac80211's station table to rhashtable had a bug that I found by accident in code review, that hadn't been found as rhashtable apparently managed to have a maximum hash chain length of one (!) in all our testing. In order to test the bug and verify the fix I set my rhashtable's max_size very low (4) in order to force getting hash collisions. At that point, rhashtable WARNed in rhashtable_insert_rehash() but didn't actually reject the hash table insertion. This caused it to lose insertions - my master list of stations would have 9 entries, but the rhashtable only had 5. This may warrant a deeper look, but that WARN_ON() just shouldn't happen. Fix this by not returning true from rht_grow_above_100() when the rhashtable's max_size has been reached - in this case the user is explicitly configuring it to be at most that big, so even if it's now above 100% it shouldn't attempt to resize. This fixes the "lost insertion" issue and consequently allows my code to display its error (and verify my fix for it.) Signed-off-by: Johannes Berg Acked-by: Thomas Graf Signed-off-by: David S. Miller --- include/linux/rhashtable.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/rhashtable.h b/include/linux/rhashtable.h index e23d242d1230..dbcbcc59aa92 100644 --- a/include/linux/rhashtable.h +++ b/include/linux/rhashtable.h @@ -282,7 +282,8 @@ static inline bool rht_shrink_below_30(const struct rhashtable *ht, static inline bool rht_grow_above_100(const struct rhashtable *ht, const struct bucket_table *tbl) { - return atomic_read(&ht->nelems) > tbl->size; + return atomic_read(&ht->nelems) > tbl->size && + (!ht->p.max_size || tbl->size < ht->p.max_size); } /* The bucket lock is selected based on the hash and protects mutations -- cgit v1.2.3 From 547c4b547e07dcc60874b6ef6252dd49ff74aec1 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Mon, 20 Apr 2015 12:35:47 +0200 Subject: netfilter: bridge: fix NULL deref in physin/out ifindex helpers Might not have an outdev yet. We'll oops when iface goes down while skbs are still nfqueue'd: RIP: 0010:[] [] dev_cmp+0x4f/0x80 nfqnl_rcv_dev_event+0xe2/0x150 notifier_call_chain+0x53/0xa0 Fixes: c737b7c4510026 ("netfilter: bridge: add helpers for fetching physin/outdev") Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter_bridge.h | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netfilter_bridge.h b/include/linux/netfilter_bridge.h index ab8f76dba668..f2fdb5a52070 100644 --- a/include/linux/netfilter_bridge.h +++ b/include/linux/netfilter_bridge.h @@ -39,12 +39,24 @@ static inline void br_drop_fake_rtable(struct sk_buff *skb) static inline int nf_bridge_get_physinif(const struct sk_buff *skb) { - return skb->nf_bridge ? skb->nf_bridge->physindev->ifindex : 0; + struct nf_bridge_info *nf_bridge; + + if (skb->nf_bridge == NULL) + return 0; + + nf_bridge = skb->nf_bridge; + return nf_bridge->physindev ? nf_bridge->physindev->ifindex : 0; } static inline int nf_bridge_get_physoutif(const struct sk_buff *skb) { - return skb->nf_bridge ? skb->nf_bridge->physoutdev->ifindex : 0; + struct nf_bridge_info *nf_bridge; + + if (skb->nf_bridge == NULL) + return 0; + + nf_bridge = skb->nf_bridge; + return nf_bridge->physoutdev ? nf_bridge->physoutdev->ifindex : 0; } static inline struct net_device * -- cgit v1.2.3 From 1dcc73d7bb0429994c54d33b40c5fb82b741a791 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Wed, 22 Apr 2015 18:20:04 +0100 Subject: irqchip: gic: Drop support for gic_arch_extn Now that the users of gic_arch_extn have been fixed, drop the "feature" for good. This leads to the removal of some now useless locking. Signed-off-by: Marc Zyngier Cc: linux-arm-kernel@lists.infradead.org Cc: Jason Cooper Signed-off-by: Thomas Gleixner --- include/linux/irqchip/arm-gic.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/irqchip/arm-gic.h b/include/linux/irqchip/arm-gic.h index 36ec4ae74634..9de976b4f9a7 100644 --- a/include/linux/irqchip/arm-gic.h +++ b/include/linux/irqchip/arm-gic.h @@ -95,8 +95,6 @@ struct device_node; -extern struct irq_chip gic_arch_extn; - void gic_set_irqchip_flags(unsigned long flags); void gic_init_bases(unsigned int, int, void __iomem *, void __iomem *, u32 offset, struct device_node *); -- cgit v1.2.3 From 2ea2f62c8bda242433809c7f4e9eae1c52c40bbe Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 24 Apr 2015 16:05:01 -0700 Subject: net: fix crash in build_skb() When I added pfmemalloc support in build_skb(), I forgot netlink was using build_skb() with a vmalloc() area. In this patch I introduce __build_skb() for netlink use, and build_skb() is a wrapper handling both skb->head_frag and skb->pfmemalloc This means netlink no longer has to hack skb->head_frag [ 1567.700067] kernel BUG at arch/x86/mm/physaddr.c:26! [ 1567.700067] invalid opcode: 0000 [#1] PREEMPT SMP KASAN [ 1567.700067] Dumping ftrace buffer: [ 1567.700067] (ftrace buffer empty) [ 1567.700067] Modules linked in: [ 1567.700067] CPU: 9 PID: 16186 Comm: trinity-c182 Not tainted 4.0.0-next-20150424-sasha-00037-g4796e21 #2167 [ 1567.700067] task: ffff880127efb000 ti: ffff880246770000 task.ti: ffff880246770000 [ 1567.700067] RIP: __phys_addr (arch/x86/mm/physaddr.c:26 (discriminator 3)) [ 1567.700067] RSP: 0018:ffff8802467779d8 EFLAGS: 00010202 [ 1567.700067] RAX: 000041000ed8e000 RBX: ffffc9008ed8e000 RCX: 000000000000002c [ 1567.700067] RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffffffffb3fd6049 [ 1567.700067] RBP: ffff8802467779f8 R08: 0000000000000019 R09: ffff8801d0168000 [ 1567.700067] R10: ffff8801d01680c7 R11: ffffed003a02d019 R12: ffffc9000ed8e000 [ 1567.700067] R13: 0000000000000f40 R14: 0000000000001180 R15: ffffc9000ed8e000 [ 1567.700067] FS: 00007f2a7da3f700(0000) GS:ffff8801d1000000(0000) knlGS:0000000000000000 [ 1567.700067] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1567.700067] CR2: 0000000000738308 CR3: 000000022e329000 CR4: 00000000000007e0 [ 1567.700067] Stack: [ 1567.700067] ffffc9000ed8e000 ffff8801d0168000 ffffc9000ed8e000 ffff8801d0168000 [ 1567.700067] ffff880246777a28 ffffffffad7c0a21 0000000000001080 ffff880246777c08 [ 1567.700067] ffff88060d302e68 ffff880246777b58 ffff880246777b88 ffffffffad9a6821 [ 1567.700067] Call Trace: [ 1567.700067] build_skb (include/linux/mm.h:508 net/core/skbuff.c:316) [ 1567.700067] netlink_sendmsg (net/netlink/af_netlink.c:1633 net/netlink/af_netlink.c:2329) [ 1567.774369] ? sched_clock_cpu (kernel/sched/clock.c:311) [ 1567.774369] ? netlink_unicast (net/netlink/af_netlink.c:2273) [ 1567.774369] ? netlink_unicast (net/netlink/af_netlink.c:2273) [ 1567.774369] sock_sendmsg (net/socket.c:614 net/socket.c:623) [ 1567.774369] sock_write_iter (net/socket.c:823) [ 1567.774369] ? sock_sendmsg (net/socket.c:806) [ 1567.774369] __vfs_write (fs/read_write.c:479 fs/read_write.c:491) [ 1567.774369] ? get_lock_stats (kernel/locking/lockdep.c:249) [ 1567.774369] ? default_llseek (fs/read_write.c:487) [ 1567.774369] ? vtime_account_user (kernel/sched/cputime.c:701) [ 1567.774369] ? rw_verify_area (fs/read_write.c:406 (discriminator 4)) [ 1567.774369] vfs_write (fs/read_write.c:539) [ 1567.774369] SyS_write (fs/read_write.c:586 fs/read_write.c:577) [ 1567.774369] ? SyS_read (fs/read_write.c:577) [ 1567.774369] ? __this_cpu_preempt_check (lib/smp_processor_id.c:63) [ 1567.774369] ? trace_hardirqs_on_caller (kernel/locking/lockdep.c:2594 kernel/locking/lockdep.c:2636) [ 1567.774369] ? trace_hardirqs_on_thunk (arch/x86/lib/thunk_64.S:42) [ 1567.774369] system_call_fastpath (arch/x86/kernel/entry_64.S:261) Fixes: 79930f5892e ("net: do not deplete pfmemalloc reserve") Signed-off-by: Eric Dumazet Reported-by: Sasha Levin Signed-off-by: David S. Miller --- include/linux/skbuff.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 06793b598f44..66e374d62f64 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -773,6 +773,7 @@ bool skb_try_coalesce(struct sk_buff *to, struct sk_buff *from, struct sk_buff *__alloc_skb(unsigned int size, gfp_t priority, int flags, int node); +struct sk_buff *__build_skb(void *data, unsigned int frag_size); struct sk_buff *build_skb(void *data, unsigned int frag_size); static inline struct sk_buff *alloc_skb(unsigned int size, gfp_t priority) -- cgit v1.2.3 From 8393b811f38acdf7fd8da2028708edad3e68ce1f Mon Sep 17 00:00:00 2001 From: Gabriele Mazzotta Date: Sat, 25 Apr 2015 19:52:36 +0200 Subject: libata: Add helper to determine when PHY events should be ignored This is a preparation commit that will allow to add other criteria according to which PHY events should be dropped. Signed-off-by: Gabriele Mazzotta Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org --- include/linux/libata.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/libata.h b/include/linux/libata.h index 8dad4a307bb8..6138d87277af 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -1201,6 +1201,7 @@ extern struct ata_device *ata_dev_pair(struct ata_device *adev); extern int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev); extern void ata_scsi_port_error_handler(struct Scsi_Host *host, struct ata_port *ap); extern void ata_scsi_cmd_error_handler(struct Scsi_Host *host, struct ata_port *ap, struct list_head *eh_q); +extern bool sata_lpm_ignore_phy_events(struct ata_link *link); extern int ata_cable_40wire(struct ata_port *ap); extern int ata_cable_80wire(struct ata_port *ap); -- cgit v1.2.3 From 09c5b4803a80a5451d950d6a539d2eb311dc0fb1 Mon Sep 17 00:00:00 2001 From: Gabriele Mazzotta Date: Sat, 25 Apr 2015 19:52:37 +0200 Subject: libata: Ignore spurious PHY event on LPM policy change When the LPM policy is set to ATA_LPM_MAX_POWER, the device might generate a spurious PHY event that cuases errors on the link. Ignore this event if it occured within 10s after the policy change. The timeout was chosen observing that on a Dell XPS13 9333 these spurious events can occur up to roughly 6s after the policy change. Link: http://lkml.kernel.org/g/3352987.ugV1Ipy7Z5@xps13 Signed-off-by: Gabriele Mazzotta Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org --- include/linux/libata.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/linux') diff --git a/include/linux/libata.h b/include/linux/libata.h index 6138d87277af..28aeae46f355 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -205,6 +205,7 @@ enum { ATA_LFLAG_SW_ACTIVITY = (1 << 7), /* keep activity stats */ ATA_LFLAG_NO_LPM = (1 << 8), /* disable LPM on this link */ ATA_LFLAG_RST_ONCE = (1 << 9), /* limit recovery to one reset */ + ATA_LFLAG_CHANGED = (1 << 10), /* LPM state changed on this link */ /* struct ata_port flags */ ATA_FLAG_SLAVE_POSS = (1 << 0), /* host supports slave dev */ @@ -309,6 +310,12 @@ enum { */ ATA_TMOUT_PMP_SRST_WAIT = 5000, + /* When the LPM policy is set to ATA_LPM_MAX_POWER, there might + * be a spurious PHY event, so ignore the first PHY event that + * occurs within 10s after the policy change. + */ + ATA_TMOUT_SPURIOUS_PHY = 10000, + /* ATA bus states */ BUS_UNKNOWN = 0, BUS_DMA = 1, @@ -788,6 +795,8 @@ struct ata_link { struct ata_eh_context eh_context; struct ata_device device[ATA_MAX_DEVICES]; + + unsigned long last_lpm_change; /* when last LPM change happened */ }; #define ATA_LINK_CLEAR_BEGIN offsetof(struct ata_link, active_tag) #define ATA_LINK_CLEAR_END offsetof(struct ata_link, device[0]) -- cgit v1.2.3 From 73459e2a1ada09a68c02cc5b73f3116fc8194b3d Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Thu, 23 Apr 2015 13:20:18 +0200 Subject: x86: pvclock: Really remove the sched notifier for cross-cpu migrations This reverts commits 0a4e6be9ca17c54817cf814b4b5aa60478c6df27 and 80f7fdb1c7f0f9266421f823964fd1962681f6ce. The task migration notifier was originally introduced in order to support the pvclock vsyscall with non-synchronized TSC, but KVM only supports it with synchronized TSC. Hence, on KVM the race condition is only needed due to a bad implementation on the host side, and even then it's so rare that it's mostly theoretical. As far as KVM is concerned it's possible to fix the host, avoiding the additional complexity in the vDSO and the (re)introduction of the task migration notifier. Xen, on the other hand, hasn't yet implemented vsyscall support at all, so we do not care about its plans for non-synchronized TSC. Reported-by: Peter Zijlstra Suggested-by: Marcelo Tosatti Signed-off-by: Paolo Bonzini --- include/linux/sched.h | 8 -------- 1 file changed, 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 8222ae40ecb0..26a2e6122734 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -175,14 +175,6 @@ extern void get_iowait_load(unsigned long *nr_waiters, unsigned long *load); extern void calc_global_load(unsigned long ticks); extern void update_cpu_load_nohz(void); -/* Notifier for when a task gets migrated to a new CPU */ -struct task_migration_notifier { - struct task_struct *task; - int from_cpu; - int to_cpu; -}; -extern void register_task_migration_notifier(struct notifier_block *n); - extern unsigned long get_parent_ip(unsigned long addr); extern void dump_cpu_task(int cpu); -- cgit v1.2.3 From ee136af4a064c2f61e2025873584d2c7ec93f4ae Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 21 Apr 2015 11:20:31 +0200 Subject: uas: Add US_FL_MAX_SECTORS_240 flag The usb-storage driver sets max_sectors = 240 in its scsi-host template, for uas we do not want to do that for all devices, but testing has shown that some devices need it. This commit adds a US_FL_MAX_SECTORS_240 flag for such devices, and implements support for it in uas.c, while at it it also adds support for US_FL_MAX_SECTORS_64 to uas.c. Cc: stable@vger.kernel.org # 3.16 Signed-off-by: Hans de Goede Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- include/linux/usb_usual.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h index a7f2604c5f25..7f5f78bd15ad 100644 --- a/include/linux/usb_usual.h +++ b/include/linux/usb_usual.h @@ -77,6 +77,8 @@ /* Cannot handle ATA_12 or ATA_16 CDBs */ \ US_FLAG(NO_REPORT_OPCODES, 0x04000000) \ /* Cannot handle MI_REPORT_SUPPORTED_OPERATION_CODES */ \ + US_FLAG(MAX_SECTORS_240, 0x08000000) \ + /* Sets max_sectors to 240 */ \ #define US_FLAG(name, value) US_FL_##name = value , enum { US_DO_ALL_FLAGS }; -- cgit v1.2.3 From b00f5c2dc01450bed9fed1a41a637fa917e03c5c Mon Sep 17 00:00:00 2001 From: Frederic Danis Date: Fri, 10 Apr 2015 15:13:05 +0200 Subject: tty: Re-add external interface for tty_set_termios() This is needed by Bluetooth hci_uart module to be able to change speed of Bluetooth controller and local UART. Signed-off-by: Frederic Danis Reviewed-by: Peter Hurley Cc: Marcel Holtmann Signed-off-by: Greg Kroah-Hartman --- include/linux/tty.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/tty.h b/include/linux/tty.h index 358a337af598..fe5623c9af71 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -491,6 +491,7 @@ static inline speed_t tty_get_baud_rate(struct tty_struct *tty) extern void tty_termios_copy_hw(struct ktermios *new, struct ktermios *old); extern int tty_termios_hw_change(struct ktermios *a, struct ktermios *b); +extern int tty_set_termios(struct tty_struct *tty, struct ktermios *kt); extern struct tty_ldisc *tty_ldisc_ref(struct tty_struct *); extern void tty_ldisc_deref(struct tty_ldisc *); -- cgit v1.2.3 From 46c264daaaa569e24f8aba877d0fd8167c42a9a4 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Tue, 28 Apr 2015 18:33:49 +0200 Subject: bridge/nl: remove wrong use of NLM_F_MULTI NLM_F_MULTI must be used only when a NLMSG_DONE message is sent. In fact, it is sent only at the end of a dump. Libraries like libnl will wait forever for NLMSG_DONE. Fixes: e5a55a898720 ("net: create generic bridge ops") Fixes: 815cccbf10b2 ("ixgbe: add setlink, getlink support to ixgbe and ixgbevf") CC: John Fastabend CC: Sathya Perla CC: Subbu Seetharaman CC: Ajit Khaparde CC: Jeff Kirsher CC: intel-wired-lan@lists.osuosl.org CC: Jiri Pirko CC: Scott Feldman CC: Stephen Hemminger CC: bridge@lists.linux-foundation.org Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller --- include/linux/netdevice.h | 6 ++++-- include/linux/rtnetlink.h | 2 +- 2 files changed, 5 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index dbad4d728b4b..1899c74a7127 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -977,7 +977,8 @@ typedef u16 (*select_queue_fallback_t)(struct net_device *dev, * int (*ndo_bridge_setlink)(struct net_device *dev, struct nlmsghdr *nlh, * u16 flags) * int (*ndo_bridge_getlink)(struct sk_buff *skb, u32 pid, u32 seq, - * struct net_device *dev, u32 filter_mask) + * struct net_device *dev, u32 filter_mask, + * int nlflags) * int (*ndo_bridge_dellink)(struct net_device *dev, struct nlmsghdr *nlh, * u16 flags); * @@ -1173,7 +1174,8 @@ struct net_device_ops { int (*ndo_bridge_getlink)(struct sk_buff *skb, u32 pid, u32 seq, struct net_device *dev, - u32 filter_mask); + u32 filter_mask, + int nlflags); int (*ndo_bridge_dellink)(struct net_device *dev, struct nlmsghdr *nlh, u16 flags); diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h index 2da5d1081ad9..7b8e260c4a27 100644 --- a/include/linux/rtnetlink.h +++ b/include/linux/rtnetlink.h @@ -122,5 +122,5 @@ extern int ndo_dflt_fdb_del(struct ndmsg *ndm, extern int ndo_dflt_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq, struct net_device *dev, u16 mode, - u32 flags, u32 mask); + u32 flags, u32 mask, int nlflags); #endif /* __LINUX_RTNETLINK_H */ -- cgit v1.2.3 From 0df48c26d8418c5c9fba63fac15b660d70ca2f1c Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 28 Apr 2015 15:28:17 -0700 Subject: tcp: add tcpi_bytes_acked to tcp_info This patch tracks total number of bytes acked for a TCP socket. This is the sum of all changes done to tp->snd_una, and allows for precise tracking of delivered data. RFC4898 named this : tcpEStatsAppHCThruOctetsAcked This is a 64bit field, and can be fetched both from TCP_INFO getsockopt() if one has a handle on a TCP socket, or from inet_diag netlink facility (iproute2/ss patch will follow) Note that tp->bytes_acked was placed near tp->snd_una for best data locality and minimal performance impact. Signed-off-by: Eric Dumazet Acked-by: Yuchung Cheng Cc: Matt Mathis Cc: Eric Salo Cc: Martin Lau Cc: Chris Rapier Signed-off-by: David S. Miller --- include/linux/tcp.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/tcp.h b/include/linux/tcp.h index 0caa3a2d4106..0f73b43171da 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -150,6 +150,10 @@ struct tcp_sock { u32 rcv_wup; /* rcv_nxt on last window update sent */ u32 snd_nxt; /* Next sequence we send */ + u64 bytes_acked; /* RFC4898 tcpEStatsAppHCThruOctetsAcked + * sum(delta(snd_una)), or how many bytes + * were acked. + */ u32 snd_una; /* First byte we want an ack for */ u32 snd_sml; /* Last byte of the most recently transmitted small packet */ u32 rcv_tstamp; /* timestamp of last received ACK (for keepalives) */ -- cgit v1.2.3 From bdd1f9edacb5f5835d1e6276571bbbe5b88ded48 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 28 Apr 2015 15:28:18 -0700 Subject: tcp: add tcpi_bytes_received to tcp_info This patch tracks total number of payload bytes received on a TCP socket. This is the sum of all changes done to tp->rcv_nxt RFC4898 named this : tcpEStatsAppHCThruOctetsReceived This is a 64bit field, and can be fetched both from TCP_INFO getsockopt() if one has a handle on a TCP socket, or from inet_diag netlink facility (iproute2/ss patch will follow) Note that tp->bytes_received was placed near tp->rcv_nxt for best data locality and minimal performance impact. Signed-off-by: Eric Dumazet Cc: Yuchung Cheng Cc: Matt Mathis Cc: Eric Salo Cc: Martin Lau Cc: Chris Rapier Acked-by: Yuchung Cheng Signed-off-by: David S. Miller --- include/linux/tcp.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/tcp.h b/include/linux/tcp.h index 0f73b43171da..3b2911502a8c 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -145,6 +145,10 @@ struct tcp_sock { * read the code and the spec side by side (and laugh ...) * See RFC793 and RFC1122. The RFC writes these in capitals. */ + u64 bytes_received; /* RFC4898 tcpEStatsAppHCThruOctetsReceived + * sum(delta(rcv_nxt)), or how many bytes + * were acked. + */ u32 rcv_nxt; /* What we want to receive next */ u32 copied_seq; /* Head of yet unread data */ u32 rcv_wup; /* rcv_nxt on last window update sent */ -- cgit v1.2.3 From 7829fb09a2b4268b30dd9bc782fa5ebee278b137 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Thu, 30 Apr 2015 04:13:52 +0200 Subject: lib: make memzero_explicit more robust against dead store elimination In commit 0b053c951829 ("lib: memzero_explicit: use barrier instead of OPTIMIZER_HIDE_VAR"), we made memzero_explicit() more robust in case LTO would decide to inline memzero_explicit() and eventually find out it could be elimiated as dead store. While using barrier() works well for the case of gcc, recent efforts from LLVMLinux people suggest to use llvm as an alternative to gcc, and there, Stephan found in a simple stand-alone user space example that llvm could nevertheless optimize and thus elimitate the memset(). A similar issue has been observed in the referenced llvm bug report, which is regarded as not-a-bug. Based on some experiments, icc is a bit special on its own, while it doesn't seem to eliminate the memset(), it could do so with an own implementation, and then result in similar findings as with llvm. The fix in this patch now works for all three compilers (also tested with more aggressive optimization levels). Arguably, in the current kernel tree it's more of a theoretical issue, but imho, it's better to be pedantic about it. It's clearly visible with gcc/llvm though, with the below code: if we would have used barrier() only here, llvm would have omitted clearing, not so with barrier_data() variant: static inline void memzero_explicit(void *s, size_t count) { memset(s, 0, count); barrier_data(s); } int main(void) { char buff[20]; memzero_explicit(buff, sizeof(buff)); return 0; } $ gcc -O2 test.c $ gdb a.out (gdb) disassemble main Dump of assembler code for function main: 0x0000000000400400 <+0>: lea -0x28(%rsp),%rax 0x0000000000400405 <+5>: movq $0x0,-0x28(%rsp) 0x000000000040040e <+14>: movq $0x0,-0x20(%rsp) 0x0000000000400417 <+23>: movl $0x0,-0x18(%rsp) 0x000000000040041f <+31>: xor %eax,%eax 0x0000000000400421 <+33>: retq End of assembler dump. $ clang -O2 test.c $ gdb a.out (gdb) disassemble main Dump of assembler code for function main: 0x00000000004004f0 <+0>: xorps %xmm0,%xmm0 0x00000000004004f3 <+3>: movaps %xmm0,-0x18(%rsp) 0x00000000004004f8 <+8>: movl $0x0,-0x8(%rsp) 0x0000000000400500 <+16>: lea -0x18(%rsp),%rax 0x0000000000400505 <+21>: xor %eax,%eax 0x0000000000400507 <+23>: retq End of assembler dump. As gcc, clang, but also icc defines __GNUC__, it's sufficient to define this in compiler-gcc.h only to be picked up. For a fallback or otherwise unsupported compiler, we define it as a barrier. Similarly, for ecc which does not support gcc inline asm. Reference: https://llvm.org/bugs/show_bug.cgi?id=15495 Reported-by: Stephan Mueller Tested-by: Stephan Mueller Signed-off-by: Daniel Borkmann Cc: Theodore Ts'o Cc: Stephan Mueller Cc: Hannes Frederic Sowa Cc: mancha security Cc: Mark Charlebois Cc: Behan Webster Signed-off-by: Herbert Xu --- include/linux/compiler-gcc.h | 16 +++++++++++++++- include/linux/compiler-intel.h | 3 +++ include/linux/compiler.h | 4 ++++ 3 files changed, 22 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h index cdf13ca7cac3..371e560d13cf 100644 --- a/include/linux/compiler-gcc.h +++ b/include/linux/compiler-gcc.h @@ -9,10 +9,24 @@ + __GNUC_MINOR__ * 100 \ + __GNUC_PATCHLEVEL__) - /* Optimization barrier */ + /* The "volatile" is due to gcc bugs */ #define barrier() __asm__ __volatile__("": : :"memory") +/* + * This version is i.e. to prevent dead stores elimination on @ptr + * where gcc and llvm may behave differently when otherwise using + * normal barrier(): while gcc behavior gets along with a normal + * barrier(), llvm needs an explicit input variable to be assumed + * clobbered. The issue is as follows: while the inline asm might + * access any memory it wants, the compiler could have fit all of + * @ptr into memory registers instead, and since @ptr never escaped + * from that, it proofed that the inline asm wasn't touching any of + * it. This version works well with both compilers, i.e. we're telling + * the compiler that the inline asm absolutely may see the contents + * of @ptr. See also: https://llvm.org/bugs/show_bug.cgi?id=15495 + */ +#define barrier_data(ptr) __asm__ __volatile__("": :"r"(ptr) :"memory") /* * This macro obfuscates arithmetic on a variable address so that gcc diff --git a/include/linux/compiler-intel.h b/include/linux/compiler-intel.h index ba147a1727e6..0c9a2f2c2802 100644 --- a/include/linux/compiler-intel.h +++ b/include/linux/compiler-intel.h @@ -13,9 +13,12 @@ /* Intel ECC compiler doesn't support gcc specific asm stmts. * It uses intrinsics to do the equivalent things. */ +#undef barrier_data #undef RELOC_HIDE #undef OPTIMIZER_HIDE_VAR +#define barrier_data(ptr) barrier() + #define RELOC_HIDE(ptr, off) \ ({ unsigned long __ptr; \ __ptr = (unsigned long) (ptr); \ diff --git a/include/linux/compiler.h b/include/linux/compiler.h index 0e41ca0e5927..867722591be2 100644 --- a/include/linux/compiler.h +++ b/include/linux/compiler.h @@ -169,6 +169,10 @@ void ftrace_likely_update(struct ftrace_branch_data *f, int val, int expect); # define barrier() __memory_barrier() #endif +#ifndef barrier_data +# define barrier_data(ptr) barrier() +#endif + /* Unreachable code */ #ifndef unreachable # define unreachable() do { } while (1) -- cgit v1.2.3 From b2387ddcced8de3e6471a2fb16a409577063016f Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Fri, 1 May 2015 09:59:44 -0700 Subject: blk-mq: fix FUA request hang When a FUA request enters its DATA stage of flush pipeline, the request is added to mq requeue list, the request will then be added to ctx->rq_list. blk_mq_attempt_merge() might merge the request with a bio. Later when the request is finished the flush pipeline, the request->__data_len is 0. Then I only saw the bio gets endio called, the original request never finish. Adding REQ_FLUSH_SEQ into REQ_NOMERGE_FLAGS looks an easy fix. stable: 3.15+ Signed-off-by: Shaohua Li Signed-off-by: Jens Axboe --- include/linux/blk_types.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h index a1b25e35ea5f..b7299febc4b4 100644 --- a/include/linux/blk_types.h +++ b/include/linux/blk_types.h @@ -220,7 +220,7 @@ enum rq_flag_bits { /* This mask is used for both bio and request merge checking */ #define REQ_NOMERGE_FLAGS \ - (REQ_NOMERGE | REQ_STARTED | REQ_SOFTBARRIER | REQ_FLUSH | REQ_FUA) + (REQ_NOMERGE | REQ_STARTED | REQ_SOFTBARRIER | REQ_FLUSH | REQ_FUA | REQ_FLUSH_SEQ) #define REQ_RAHEAD (1ULL << __REQ_RAHEAD) #define REQ_THROTTLED (1ULL << __REQ_THROTTLED) -- cgit v1.2.3 From 6cd9e9f629f11b9412d4e9aa294c029dbb36b3cf Mon Sep 17 00:00:00 2001 From: Kapileshwar Singh Date: Wed, 18 Feb 2015 16:04:21 +0000 Subject: thermal: of: fix cooling device weights in device tree Currently you can specify the weight of the cooling device in the device tree but that information is not populated to the thermal_bind_params where the fair share governor expects it to be. The of thermal zone device doesn't have a thermal_bind_params structure and arguably it's better to pass the weight inside the thermal_instance as it is specific to the bind of a cooling device to a thermal zone parameter. Core thermal code is fixed to populate the weight in the instance from the thermal_bind_params, so platform code that was passing the weight inside the thermal_bind_params continue to work seamlessly. While we are at it, create a default value for the weight parameter for those thermal zones that currently don't define it and remove the hardcoded default in of-thermal. Cc: Zhang Rui Cc: "Rafael J. Wysocki" Cc: Len Brown Cc: Peter Feuerer Cc: Darren Hart Cc: Eduardo Valentin Cc: Kukjin Kim Cc: Durgadoss R Signed-off-by: Kapileshwar Singh Signed-off-by: Eduardo Valentin --- include/linux/thermal.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 5eac316490ea..00dacd4dfdce 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -40,6 +40,9 @@ /* No upper/lower limit requirement */ #define THERMAL_NO_LIMIT ((u32)~0) +/* Default weight of a bound cooling device */ +#define THERMAL_WEIGHT_DEFAULT 0 + /* Unit conversion macros */ #define KELVIN_TO_CELSIUS(t) (long)(((long)t-2732 >= 0) ? \ ((long)t-2732+5)/10 : ((long)t-2732-5)/10) @@ -323,7 +326,8 @@ void thermal_zone_device_unregister(struct thermal_zone_device *); int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int, struct thermal_cooling_device *, - unsigned long, unsigned long); + unsigned long, unsigned long, + unsigned int); int thermal_zone_unbind_cooling_device(struct thermal_zone_device *, int, struct thermal_cooling_device *); void thermal_zone_device_update(struct thermal_zone_device *); -- cgit v1.2.3 From bcdcbbc71125c37195f97314f453ca9a3a4eb758 Mon Sep 17 00:00:00 2001 From: Javi Merino Date: Wed, 18 Feb 2015 16:04:25 +0000 Subject: thermal: fair_share: generalize the weight concept The fair share governor has the concept of weights, which is the influence of each cooling device in a thermal zone. The current implementation forces the weights of all cooling devices in a thermal zone to add up to a 100. This complicates setups, as you need to know in advance how many cooling devices you are going to have. If you bind a new cooling device, you have to modify all the other cooling devices weights, which is error prone. Furthermore, you can't specify a "default" weight for platforms since that default value depends on the number of cooling devices in the platform. This patch generalizes the concept of weight by allowing any number to be a "weight". Weights are now relative to each other. Platforms that don't specify weights get the same default value for all their cooling devices, so all their cdevs are considered to be equally influential. It's important to note that previous users of the weights don't need to alter the code: percentages continue to work as they used to. This patch just removes the constraint of all the weights in a thermal zone having to add up to a 100. If they do, you get the same behavior as before. If they don't, fair share now works for that platform. Cc: Zhang Rui Cc: Eduardo Valentin Cc: Durgadoss R Acked-by: Durgadoss R Signed-off-by: Javi Merino Signed-off-by: Eduardo Valentin --- include/linux/thermal.h | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 00dacd4dfdce..bac0f52c7a1e 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -217,9 +217,12 @@ struct thermal_bind_params { /* * This is a measure of 'how effectively these devices can - * cool 'this' thermal zone. The shall be determined by platform - * characterization. This is on a 'percentage' scale. - * See Documentation/thermal/sysfs-api.txt for more information. + * cool 'this' thermal zone. It shall be determined by + * platform characterization. This value is relative to the + * rest of the weights so a cooling device whose weight is + * double that of another cooling device is twice as + * effective. See Documentation/thermal/sysfs-api.txt for more + * information. */ int weight; -- cgit v1.2.3 From e33df1d2f3a0141cd79e770f31999ba0dd7ebfa8 Mon Sep 17 00:00:00 2001 From: Javi Merino Date: Thu, 26 Feb 2015 19:00:27 +0000 Subject: thermal: let governors have private data for each thermal zone A governor may need to store its current state between calls to throttle(). That state depends on the thermal zone, so store it as private data in struct thermal_zone_device. The governors may have two new ops: bind_to_tz() and unbind_from_tz(). When provided, these functions let governors do some initialization and teardown when they are bound/unbound to a tz and possibly store that information in the governor_data field of the struct thermal_zone_device. Cc: Zhang Rui Cc: Eduardo Valentin Signed-off-by: Javi Merino Signed-off-by: Eduardo Valentin --- include/linux/thermal.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/linux') diff --git a/include/linux/thermal.h b/include/linux/thermal.h index bac0f52c7a1e..edf9d53c67e6 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -165,6 +165,7 @@ struct thermal_attr { * @ops: operations this &thermal_zone_device supports * @tzp: thermal zone parameters * @governor: pointer to the governor for this thermal zone + * @governor_data: private pointer for governor data * @thermal_instances: list of &struct thermal_instance of this thermal zone * @idr: &struct idr to generate unique id for this zone's cooling * devices @@ -191,6 +192,7 @@ struct thermal_zone_device { struct thermal_zone_device_ops *ops; const struct thermal_zone_params *tzp; struct thermal_governor *governor; + void *governor_data; struct list_head thermal_instances; struct idr idr; struct mutex lock; @@ -201,12 +203,19 @@ struct thermal_zone_device { /** * struct thermal_governor - structure that holds thermal governor information * @name: name of the governor + * @bind_to_tz: callback called when binding to a thermal zone. If it + * returns 0, the governor is bound to the thermal zone, + * otherwise it fails. + * @unbind_from_tz: callback called when a governor is unbound from a + * thermal zone. * @throttle: callback called for every trip point even if temperature is * below the trip point temperature * @governor_list: node in thermal_governor_list (in thermal_core.c) */ struct thermal_governor { char name[THERMAL_NAME_LENGTH]; + int (*bind_to_tz)(struct thermal_zone_device *tz); + void (*unbind_from_tz)(struct thermal_zone_device *tz); int (*throttle)(struct thermal_zone_device *tz, int trip); struct list_head governor_list; }; -- cgit v1.2.3 From 35b11d2e3a66279a477e36cefb2603806295b8ce Mon Sep 17 00:00:00 2001 From: Javi Merino Date: Thu, 26 Feb 2015 19:00:28 +0000 Subject: thermal: extend the cooling device API to include power information Add three optional callbacks to the cooling device interface to allow them to express power. In addition to the callbacks, add helpers to identify cooling devices that implement the power cooling device API. Cc: Zhang Rui Cc: Eduardo Valentin Signed-off-by: Javi Merino Signed-off-by: Eduardo Valentin --- include/linux/thermal.h | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'include/linux') diff --git a/include/linux/thermal.h b/include/linux/thermal.h index edf9d53c67e6..bf3c55f405c2 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -63,6 +63,7 @@ struct thermal_zone_device; struct thermal_cooling_device; +struct thermal_instance; enum thermal_device_mode { THERMAL_DEVICE_DISABLED = 0, @@ -116,6 +117,12 @@ struct thermal_cooling_device_ops { int (*get_max_state) (struct thermal_cooling_device *, unsigned long *); int (*get_cur_state) (struct thermal_cooling_device *, unsigned long *); int (*set_cur_state) (struct thermal_cooling_device *, unsigned long); + int (*get_requested_power)(struct thermal_cooling_device *, + struct thermal_zone_device *, u32 *); + int (*state2power)(struct thermal_cooling_device *, + struct thermal_zone_device *, unsigned long, u32 *); + int (*power2state)(struct thermal_cooling_device *, + struct thermal_zone_device *, u32, unsigned long *); }; struct thermal_cooling_device { @@ -331,6 +338,16 @@ void thermal_zone_of_sensor_unregister(struct device *dev, #endif #if IS_ENABLED(CONFIG_THERMAL) +static inline bool cdev_is_power_actor(struct thermal_cooling_device *cdev) +{ + return cdev->ops->get_requested_power && cdev->ops->state2power && + cdev->ops->power2state; +} + +int power_actor_get_max_power(struct thermal_cooling_device *, + struct thermal_zone_device *tz, u32 *max_power); +int power_actor_set_power(struct thermal_cooling_device *, + struct thermal_instance *, u32); struct thermal_zone_device *thermal_zone_device_register(const char *, int, int, void *, struct thermal_zone_device_ops *, const struct thermal_zone_params *, int, int); @@ -359,6 +376,14 @@ struct thermal_instance *get_thermal_instance(struct thermal_zone_device *, void thermal_cdev_update(struct thermal_cooling_device *); void thermal_notify_framework(struct thermal_zone_device *, int); #else +static inline bool cdev_is_power_actor(struct thermal_cooling_device *cdev) +{ return false; } +static inline int power_actor_get_max_power(struct thermal_cooling_device *cdev, + struct thermal_zone_device *tz, u32 *max_power) +{ return 0; } +static inline int power_actor_set_power(struct thermal_cooling_device *cdev, + struct thermal_instance *tz, u32 power) +{ return 0; } static inline struct thermal_zone_device *thermal_zone_device_register( const char *type, int trips, int mask, void *devdata, struct thermal_zone_device_ops *ops, -- cgit v1.2.3 From c36cf07176316fbe6a4bdbc23afcb0cbf7822bf2 Mon Sep 17 00:00:00 2001 From: Javi Merino Date: Thu, 26 Feb 2015 19:00:29 +0000 Subject: thermal: cpu_cooling: implement the power cooling device API Add a basic power model to the cpu cooling device to implement the power cooling device API. The power model uses the current frequency, current load and OPPs for the power calculations. The cpus must have registered their OPPs using the OPP library. Cc: Zhang Rui Cc: Eduardo Valentin Signed-off-by: Kapileshwar Singh Signed-off-by: Punit Agrawal Signed-off-by: Javi Merino Signed-off-by: Eduardo Valentin --- include/linux/cpu_cooling.h | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) (limited to 'include/linux') diff --git a/include/linux/cpu_cooling.h b/include/linux/cpu_cooling.h index bd955270d5aa..c156f5082758 100644 --- a/include/linux/cpu_cooling.h +++ b/include/linux/cpu_cooling.h @@ -28,6 +28,9 @@ #include #include +typedef int (*get_static_t)(cpumask_t *cpumask, int interval, + unsigned long voltage, u32 *power); + #ifdef CONFIG_CPU_THERMAL /** * cpufreq_cooling_register - function to create cpufreq cooling device. @@ -36,6 +39,10 @@ struct thermal_cooling_device * cpufreq_cooling_register(const struct cpumask *clip_cpus); +struct thermal_cooling_device * +cpufreq_power_cooling_register(const struct cpumask *clip_cpus, + u32 capacitance, get_static_t plat_static_func); + /** * of_cpufreq_cooling_register - create cpufreq cooling device based on DT. * @np: a valid struct device_node to the cooling device device tree node. @@ -45,6 +52,12 @@ cpufreq_cooling_register(const struct cpumask *clip_cpus); struct thermal_cooling_device * of_cpufreq_cooling_register(struct device_node *np, const struct cpumask *clip_cpus); + +struct thermal_cooling_device * +of_cpufreq_power_cooling_register(struct device_node *np, + const struct cpumask *clip_cpus, + u32 capacitance, + get_static_t plat_static_func); #else static inline struct thermal_cooling_device * of_cpufreq_cooling_register(struct device_node *np, @@ -52,6 +65,15 @@ of_cpufreq_cooling_register(struct device_node *np, { return ERR_PTR(-ENOSYS); } + +static inline struct thermal_cooling_device * +of_cpufreq_power_cooling_register(struct device_node *np, + const struct cpumask *clip_cpus, + u32 capacitance, + get_static_t plat_static_func) +{ + return NULL; +} #endif /** @@ -67,12 +89,29 @@ cpufreq_cooling_register(const struct cpumask *clip_cpus) { return ERR_PTR(-ENOSYS); } +static inline struct thermal_cooling_device * +cpufreq_power_cooling_register(const struct cpumask *clip_cpus, + u32 capacitance, get_static_t plat_static_func) +{ + return NULL; +} + static inline struct thermal_cooling_device * of_cpufreq_cooling_register(struct device_node *np, const struct cpumask *clip_cpus) { return ERR_PTR(-ENOSYS); } + +static inline struct thermal_cooling_device * +of_cpufreq_power_cooling_register(struct device_node *np, + const struct cpumask *clip_cpus, + u32 capacitance, + get_static_t plat_static_func) +{ + return NULL; +} + static inline void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev) { -- cgit v1.2.3 From 6b775e870c56c59c3e16531ea2307b797395f9f7 Mon Sep 17 00:00:00 2001 From: Javi Merino Date: Mon, 2 Mar 2015 17:17:19 +0000 Subject: thermal: introduce the Power Allocator governor The power allocator governor is a thermal governor that controls system and device power allocation to control temperature. Conceptually, the implementation divides the sustainable power of a thermal zone among all the heat sources in that zone. This governor relies on "power actors", entities that represent heat sources. They can report current and maximum power consumption and can set a given maximum power consumption, usually via a cooling device. The governor uses a Proportional Integral Derivative (PID) controller driven by the temperature of the thermal zone. The output of the controller is a power budget that is then allocated to each power actor that can have bearing on the temperature we are trying to control. It decides how much power to give each cooling device based on the performance they are requesting. The PID controller ensures that the total power budget does not exceed the control temperature. Cc: Zhang Rui Cc: Eduardo Valentin Signed-off-by: Punit Agrawal Signed-off-by: Javi Merino Signed-off-by: Eduardo Valentin --- include/linux/thermal.h | 37 ++++++++++++++++++++++++++++++++----- 1 file changed, 32 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/thermal.h b/include/linux/thermal.h index bf3c55f405c2..6bbe11c97cea 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -59,6 +59,8 @@ #define DEFAULT_THERMAL_GOVERNOR "fair_share" #elif defined(CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE) #define DEFAULT_THERMAL_GOVERNOR "user_space" +#elif defined(CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR) +#define DEFAULT_THERMAL_GOVERNOR "power_allocator" #endif struct thermal_zone_device; @@ -154,8 +156,7 @@ struct thermal_attr { * @devdata: private pointer for device private data * @trips: number of trip points the thermal zone supports * @passive_delay: number of milliseconds to wait between polls when - * performing passive cooling. Currenty only used by the - * step-wise governor + * performing passive cooling. * @polling_delay: number of milliseconds to wait between polls when * checking whether trip points have been crossed (0 for * interrupt driven systems) @@ -165,7 +166,6 @@ struct thermal_attr { * @last_temperature: previous temperature read * @emul_temperature: emulated temperature when using CONFIG_THERMAL_EMULATION * @passive: 1 if you've crossed a passive trip point, 0 otherwise. - * Currenty only used by the step-wise governor. * @forced_passive: If > 0, temperature at which to switch on all ACPI * processor cooling devices. Currently only used by the * step-wise governor. @@ -197,7 +197,7 @@ struct thermal_zone_device { int passive; unsigned int forced_passive; struct thermal_zone_device_ops *ops; - const struct thermal_zone_params *tzp; + struct thermal_zone_params *tzp; struct thermal_governor *governor; void *governor_data; struct list_head thermal_instances; @@ -275,6 +275,33 @@ struct thermal_zone_params { int num_tbps; /* Number of tbp entries */ struct thermal_bind_params *tbp; + + /* + * Sustainable power (heat) that this thermal zone can dissipate in + * mW + */ + u32 sustainable_power; + + /* + * Proportional parameter of the PID controller when + * overshooting (i.e., when temperature is below the target) + */ + s32 k_po; + + /* + * Proportional parameter of the PID controller when + * undershooting + */ + s32 k_pu; + + /* Integral parameter of the PID controller */ + s32 k_i; + + /* Derivative parameter of the PID controller */ + s32 k_d; + + /* threshold below which the error is no longer accumulated */ + s32 integral_cutoff; }; struct thermal_genl_event { @@ -350,7 +377,7 @@ int power_actor_set_power(struct thermal_cooling_device *, struct thermal_instance *, u32); struct thermal_zone_device *thermal_zone_device_register(const char *, int, int, void *, struct thermal_zone_device_ops *, - const struct thermal_zone_params *, int, int); + struct thermal_zone_params *, int, int); void thermal_zone_device_unregister(struct thermal_zone_device *); int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int, -- cgit v1.2.3 From 05836c378c7af9527b98a83746f32c7289a5f3c8 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 5 May 2015 16:23:57 -0700 Subject: util_macros.h: have array pointer point to array of constants Using the new find_closest() macro can result in the following sparse warnings. drivers/hwmon/lm85.c:194:16: warning: incorrect type in initializer (different modifiers) drivers/hwmon/lm85.c:194:16: expected int *__fc_a drivers/hwmon/lm85.c:194:16: got int static const [toplevel] * drivers/hwmon/lm85.c:210:16: warning: incorrect type in initializer (different modifiers) drivers/hwmon/lm85.c:210:16: expected int *__fc_a drivers/hwmon/lm85.c:210:16: got int const *map This is because the array passed to find_closest() will typically be declared as array of constants, but the macro declares a non-constant pointer to it. Signed-off-by: Guenter Roeck Cc: Bartosz Golaszewski Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/util_macros.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/util_macros.h b/include/linux/util_macros.h index d5f4fb69dba3..f9b2ce58039b 100644 --- a/include/linux/util_macros.h +++ b/include/linux/util_macros.h @@ -5,7 +5,7 @@ ({ \ typeof(as) __fc_i, __fc_as = (as) - 1; \ typeof(x) __fc_x = (x); \ - typeof(*a) *__fc_a = (a); \ + typeof(*a) const *__fc_a = (a); \ for (__fc_i = 0; __fc_i < __fc_as; __fc_i++) { \ if (__fc_x op DIV_ROUND_CLOSEST(__fc_a[__fc_i] + \ __fc_a[__fc_i + 1], 2)) \ -- cgit v1.2.3 From d8fd150fe3935e1692bf57c66691e17409ebb9c1 Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Tue, 5 May 2015 16:24:00 -0700 Subject: nilfs2: fix sanity check of btree level in nilfs_btree_root_broken() The range check for b-tree level parameter in nilfs_btree_root_broken() is wrong; it accepts the case of "level == NILFS_BTREE_LEVEL_MAX" even though the level is limited to values in the range of 0 to (NILFS_BTREE_LEVEL_MAX - 1). Since the level parameter is read from storage device and used to index nilfs_btree_path array whose element count is NILFS_BTREE_LEVEL_MAX, it can cause memory overrun during btree operations if the boundary value is set to the level parameter on device. This fixes the broken sanity check and adds a comment to clarify that the upper bound NILFS_BTREE_LEVEL_MAX is exclusive. Signed-off-by: Ryusuke Konishi Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/nilfs2_fs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/nilfs2_fs.h b/include/linux/nilfs2_fs.h index ff3fea3194c6..9abb763e4b86 100644 --- a/include/linux/nilfs2_fs.h +++ b/include/linux/nilfs2_fs.h @@ -460,7 +460,7 @@ struct nilfs_btree_node { /* level */ #define NILFS_BTREE_LEVEL_DATA 0 #define NILFS_BTREE_LEVEL_NODE_MIN (NILFS_BTREE_LEVEL_DATA + 1) -#define NILFS_BTREE_LEVEL_MAX 14 +#define NILFS_BTREE_LEVEL_MAX 14 /* Max level (exclusive) */ /** * struct nilfs_palloc_group_desc - block group descriptor -- cgit v1.2.3 From ac01ce1410fc2c7b5f3af5e9c972e6a412eee54f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Alex=20Benn=C3=A9e?= Date: Wed, 29 Apr 2015 16:18:46 +0100 Subject: tracing: Make ftrace_print_array_seq compute buf_len MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The only caller to this function (__print_array) was getting it wrong by passing the array length instead of buffer length. As the element size was already being passed for other reasons it seems reasonable to push the calculation of buffer length into the function. Link: http://lkml.kernel.org/r/1430320727-14582-1-git-send-email-alex.bennee@linaro.org Signed-off-by: Alex Bennée Signed-off-by: Steven Rostedt --- include/linux/ftrace_event.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h index 46e83c2156c6..f9ecf63d47f1 100644 --- a/include/linux/ftrace_event.h +++ b/include/linux/ftrace_event.h @@ -46,7 +46,7 @@ const char *ftrace_print_hex_seq(struct trace_seq *p, const unsigned char *buf, int len); const char *ftrace_print_array_seq(struct trace_seq *p, - const void *buf, int buf_len, + const void *buf, int count, size_t el_size); struct trace_iterator; -- cgit v1.2.3 From 0782e63bc6fe7e2d3408d250df11d388b7799c6b Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 5 May 2015 19:49:49 +0200 Subject: sched: Handle priority boosted tasks proper in setscheduler() Ronny reported that the following scenario is not handled correctly: T1 (prio = 10) lock(rtmutex); T2 (prio = 20) lock(rtmutex) boost T1 T1 (prio = 20) sys_set_scheduler(prio = 30) T1 prio = 30 .... sys_set_scheduler(prio = 10) T1 prio = 30 The last step is wrong as T1 should now be back at prio 20. Commit c365c292d059 ("sched: Consider pi boosting in setscheduler()") only handles the case where a boosted tasks tries to lower its priority. Fix it by taking the new effective priority into account for the decision whether a change of the priority is required. Reported-by: Ronny Meeus Tested-by: Steven Rostedt Signed-off-by: Thomas Gleixner Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Steven Rostedt Cc: Cc: Borislav Petkov Cc: H. Peter Anvin Cc: Mike Galbraith Fixes: c365c292d059 ("sched: Consider pi boosting in setscheduler()") Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1505051806060.4225@nanos Signed-off-by: Ingo Molnar --- include/linux/sched/rt.h | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sched/rt.h b/include/linux/sched/rt.h index 6341f5be6e24..a30b172df6e1 100644 --- a/include/linux/sched/rt.h +++ b/include/linux/sched/rt.h @@ -18,7 +18,7 @@ static inline int rt_task(struct task_struct *p) #ifdef CONFIG_RT_MUTEXES extern int rt_mutex_getprio(struct task_struct *p); extern void rt_mutex_setprio(struct task_struct *p, int prio); -extern int rt_mutex_check_prio(struct task_struct *task, int newprio); +extern int rt_mutex_get_effective_prio(struct task_struct *task, int newprio); extern struct task_struct *rt_mutex_get_top_task(struct task_struct *task); extern void rt_mutex_adjust_pi(struct task_struct *p); static inline bool tsk_is_pi_blocked(struct task_struct *tsk) @@ -31,9 +31,10 @@ static inline int rt_mutex_getprio(struct task_struct *p) return p->normal_prio; } -static inline int rt_mutex_check_prio(struct task_struct *task, int newprio) +static inline int rt_mutex_get_effective_prio(struct task_struct *task, + int newprio) { - return 0; + return newprio; } static inline struct task_struct *rt_mutex_get_top_task(struct task_struct *task) -- cgit v1.2.3 From 1a48632ffed61352a7810ce089dc5a8bcd505a60 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Mon, 13 Apr 2015 13:24:34 -0400 Subject: pty: Fix input race when closing A read() from a pty master may mistakenly indicate EOF (errno == -EIO) after the pty slave has closed, even though input data remains to be read. For example, pty slave | input worker | pty master | | | | n_tty_read() pty_write() | | input avail? no add data | | sleep schedule worker --->| | . |---> flush_to_ldisc() | . pty_close() | fill read buffer | . wait for worker | wakeup reader --->| . | read buffer full? |---> input avail ? yes |<--- yes - exit worker | copy 4096 bytes to user TTY_OTHER_CLOSED <---| |<--- kick worker | | **** New read() before worker starts **** | | n_tty_read() | | input avail? no | | TTY_OTHER_CLOSED? yes | | return -EIO Several conditions are required to trigger this race: 1. the ldisc read buffer must become full so the input worker exits 2. the read() count parameter must be >= 4096 so the ldisc read buffer is empty 3. the subsequent read() occurs before the kicked worker has processed more input However, the underlying cause of the race is that data is pipelined, while tty state is not; ie., data already written by the pty slave end is not yet visible to the pty master end, but state changes by the pty slave end are visible to the pty master end immediately. Pipeline the TTY_OTHER_CLOSED state through input worker to the reader. 1. Introduce TTY_OTHER_DONE which is set by the input worker when TTY_OTHER_CLOSED is set and either the input buffers are flushed or input processing has completed. Readers/polls are woken when TTY_OTHER_DONE is set. 2. Reader/poll checks TTY_OTHER_DONE instead of TTY_OTHER_CLOSED. 3. A new input worker is started from pty_close() after setting TTY_OTHER_CLOSED, which ensures the TTY_OTHER_DONE state will be set if the last input worker is already finished (or just about to exit). Remove tty_flush_to_ldisc(); no in-tree callers. Fixes: 52bce7f8d4fc ("pty, n_tty: Simplify input processing on final close") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96311 BugLink: http://bugs.launchpad.net/bugs/1429756 Cc: # 3.19+ Reported-by: Andy Whitcroft Reported-by: H.J. Lu Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- include/linux/tty.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/tty.h b/include/linux/tty.h index fe5623c9af71..d76631f615c2 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -339,6 +339,7 @@ struct tty_file_private { #define TTY_EXCLUSIVE 3 /* Exclusive open mode */ #define TTY_DEBUG 4 /* Debugging */ #define TTY_DO_WRITE_WAKEUP 5 /* Call write_wakeup after queuing new */ +#define TTY_OTHER_DONE 6 /* Closed pty has completed input processing */ #define TTY_LDISC_OPEN 11 /* Line discipline is open */ #define TTY_PTY_LOCK 16 /* pty private */ #define TTY_NO_WRITE_SPLIT 17 /* Preserve write boundaries to driver */ @@ -462,7 +463,6 @@ extern int tty_hung_up_p(struct file *filp); extern void do_SAK(struct tty_struct *tty); extern void __do_SAK(struct tty_struct *tty); extern void no_tty(void); -extern void tty_flush_to_ldisc(struct tty_struct *tty); extern void tty_buffer_free_all(struct tty_port *port); extern void tty_buffer_flush(struct tty_struct *tty, struct tty_ldisc *ld); extern void tty_buffer_init(struct tty_port *port); -- cgit v1.2.3 From 9d0be7f4810257a9b0fc78fff641f14409f14ab3 Mon Sep 17 00:00:00 2001 From: Eduardo Valentin Date: Mon, 11 May 2015 19:34:23 -0700 Subject: thermal: support slope and offset coefficients It is common to have a linear extrapolation from the current sensor readings and the actual temperature value. This is specially the case when the sensor is in use to extrapolate hotspots. This patch adds slope and offset constants for single sensor linear extrapolation equation. Because the same sensor can be use in different locations, from board to board, these constants are added as part of thermal_zone_params. The constants are available through sysfs. It is up to the device driver to determine the usage of these values. Signed-off-by: Eduardo Valentin --- include/linux/thermal.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include/linux') diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 6bbe11c97cea..037e9df2f610 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -302,6 +302,17 @@ struct thermal_zone_params { /* threshold below which the error is no longer accumulated */ s32 integral_cutoff; + + /* + * @slope: slope of a linear temperature adjustment curve. + * Used by thermal zone drivers. + */ + int slope; + /* + * @offset: offset of a linear temperature adjustment curve. + * Used by thermal zone drivers (default 0). + */ + int offset; }; struct thermal_genl_event { -- cgit v1.2.3 From 01d460dd70adc858e15307332832183c622bee50 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Tue, 12 May 2015 09:37:00 -0600 Subject: net: Remove remaining remnants of pm_qos from netdevice.h Commit e2c6544829f removed pm_qos from struct net_device but left the comment and header file. Remove those. Signed-off-by: David Ahern Cc: Thomas Graf Signed-off-by: David S. Miller --- include/linux/netdevice.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 1899c74a7127..05b9a694e213 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -25,7 +25,6 @@ #ifndef _LINUX_NETDEVICE_H #define _LINUX_NETDEVICE_H -#include #include #include #include @@ -1499,8 +1498,6 @@ enum netdev_priv_flags { * * @qdisc_tx_busylock: XXX: need comments on this one * - * @pm_qos_req: Power Management QoS object - * * FIXME: cleanup struct net_device such that network protocol info * moves out. */ -- cgit v1.2.3 From 8f4fc071b1926d0b20336e2b3f8ab85c94c734c5 Mon Sep 17 00:00:00 2001 From: Vladimir Davydov Date: Thu, 14 May 2015 15:16:55 -0700 Subject: gfp: add __GFP_NOACCOUNT Not all kmem allocations should be accounted to memcg. The following patch gives an example when accounting of a certain type of allocations to memcg can effectively result in a memory leak. This patch adds the __GFP_NOACCOUNT flag which if passed to kmalloc and friends will force the allocation to go through the root cgroup. It will be used by the next patch. Note, since in case of kmemleak enabled each kmalloc implies yet another allocation from the kmemleak_object cache, we add __GFP_NOACCOUNT to gfp_kmemleak_mask. Alternatively, we could introduce a per kmem cache flag disabling accounting for all allocations of a particular kind, but (a) we would not be able to bypass accounting for kmalloc then and (b) a kmem cache with this flag set could not be merged with a kmem cache without this flag, which would increase the number of global caches and therefore fragmentation even if the memory cgroup controller is not used. Despite its generic name, currently __GFP_NOACCOUNT disables accounting only for kmem allocations while user page allocations are always charged. To catch abusing of this flag, a warning is issued on an attempt of passing it to mem_cgroup_try_charge. Signed-off-by: Vladimir Davydov Cc: Tejun Heo Cc: Johannes Weiner Cc: Michal Hocko Cc: Christoph Lameter Cc: Pekka Enberg Cc: David Rientjes Cc: Joonsoo Kim Cc: Greg Thelen Cc: Greg Kroah-Hartman Cc: [4.0.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/gfp.h | 2 ++ include/linux/memcontrol.h | 4 ++++ 2 files changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/gfp.h b/include/linux/gfp.h index 97a9373e61e8..15928f0647e4 100644 --- a/include/linux/gfp.h +++ b/include/linux/gfp.h @@ -30,6 +30,7 @@ struct vm_area_struct; #define ___GFP_HARDWALL 0x20000u #define ___GFP_THISNODE 0x40000u #define ___GFP_RECLAIMABLE 0x80000u +#define ___GFP_NOACCOUNT 0x100000u #define ___GFP_NOTRACK 0x200000u #define ___GFP_NO_KSWAPD 0x400000u #define ___GFP_OTHER_NODE 0x800000u @@ -87,6 +88,7 @@ struct vm_area_struct; #define __GFP_HARDWALL ((__force gfp_t)___GFP_HARDWALL) /* Enforce hardwall cpuset memory allocs */ #define __GFP_THISNODE ((__force gfp_t)___GFP_THISNODE)/* No fallback, no policies */ #define __GFP_RECLAIMABLE ((__force gfp_t)___GFP_RECLAIMABLE) /* Page is reclaimable */ +#define __GFP_NOACCOUNT ((__force gfp_t)___GFP_NOACCOUNT) /* Don't account to kmemcg */ #define __GFP_NOTRACK ((__force gfp_t)___GFP_NOTRACK) /* Don't track with kmemcheck */ #define __GFP_NO_KSWAPD ((__force gfp_t)___GFP_NO_KSWAPD) diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index 72dff5fb0d0c..6c8918114804 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -463,6 +463,8 @@ memcg_kmem_newpage_charge(gfp_t gfp, struct mem_cgroup **memcg, int order) if (!memcg_kmem_enabled()) return true; + if (gfp & __GFP_NOACCOUNT) + return true; /* * __GFP_NOFAIL allocations will move on even if charging is not * possible. Therefore we don't even try, and have this allocation @@ -522,6 +524,8 @@ memcg_kmem_get_cache(struct kmem_cache *cachep, gfp_t gfp) { if (!memcg_kmem_enabled()) return cachep; + if (gfp & __GFP_NOACCOUNT) + return cachep; if (gfp & __GFP_NOFAIL) return cachep; if (in_interrupt() || (!current->mm) || (current->flags & PF_KTHREAD)) -- cgit v1.2.3 From 929aa5b250bfc59aca492d3213c7f3a53e2a5247 Mon Sep 17 00:00:00 2001 From: Josh Triplett Date: Thu, 14 May 2015 15:17:01 -0700 Subject: uidgid: make uid_valid and gid_valid work with !CONFIG_MULTIUSER {u,g}id_valid call {u,g}id_eq, which calls __k{u,g}id_val on both arguments and compares. With !CONFIG_MULTIUSER, __k{u,g}id_val return a constant 0, which makes {u,g}id_valid always return false. Change {u,g}id_valid to compare their argument against -1 instead. That produces identical results in the normal CONFIG_MULTIUSER=y case, but with !CONFIG_MULTIUSER will make {u,g}id_valid constant-fold into "return true;" rather than "return false;". This fixes uses of devpts without CONFIG_MULTIUSER. Signed-off-by: Josh Triplett Reported-by: Fengguang Wu , Cc: Peter Hurley Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/uidgid.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/uidgid.h b/include/linux/uidgid.h index 0ee05da38899..03835522dfcb 100644 --- a/include/linux/uidgid.h +++ b/include/linux/uidgid.h @@ -109,12 +109,12 @@ static inline bool gid_lte(kgid_t left, kgid_t right) static inline bool uid_valid(kuid_t uid) { - return !uid_eq(uid, INVALID_UID); + return __kuid_val(uid) != (uid_t) -1; } static inline bool gid_valid(kgid_t gid) { - return !gid_eq(gid, INVALID_GID); + return __kgid_val(gid) != (gid_t) -1; } #ifdef CONFIG_USER_NS -- cgit v1.2.3