From a288d648715bab6a1ab2b72cb1c1cc79cdc8cb43 Mon Sep 17 00:00:00 2001 From: Richard Fitzgerald Date: Fri, 23 May 2014 12:54:57 +0100 Subject: extcon: arizona: support inverted jack detect switch Add config option for inverted jack detect switch that opens when jack is inserted. Signed-off-by: Richard Fitzgerald [Acked by Lee Jones for MFD part] Acked-by: Lee Jones Signed-off-by: Chanwoo Choi --- include/linux/mfd/arizona/pdata.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/arizona/pdata.h b/include/linux/mfd/arizona/pdata.h index 12a5c135c746..4578c72c9b86 100644 --- a/include/linux/mfd/arizona/pdata.h +++ b/include/linux/mfd/arizona/pdata.h @@ -127,6 +127,9 @@ struct arizona_pdata { /** Internal pull on GPIO5 is disabled when used for jack detection */ bool jd_gpio5_nopull; + /** set to true if jackdet contact opens on insert */ + bool jd_invert; + /** Use the headphone detect circuit to identify the accessory */ bool hpdet_acc_id; -- cgit v1.2.3 From d0540f91cf74fab90e1143d8d40da8a5b5fabc8a Mon Sep 17 00:00:00 2001 From: Robert Baldyga Date: Wed, 21 May 2014 08:52:47 +0200 Subject: mfd: max77693: Remove unnecessary wrapper functions This patch removes wrapper functions used to access regmap, and make driver using regmap_*() functions instead. Signed-off-by: Robert Baldyga Reviewed-by: Krzysztof Kozlowski Acked-by: Mark Brown Acked-by: Chanwoo Choi Signed-off-by: Lee Jones --- include/linux/mfd/max77693-private.h | 8 -------- 1 file changed, 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/max77693-private.h b/include/linux/mfd/max77693-private.h index 3e050b933dd0..80ec31d561c4 100644 --- a/include/linux/mfd/max77693-private.h +++ b/include/linux/mfd/max77693-private.h @@ -332,14 +332,6 @@ enum max77693_types { TYPE_MAX77693, }; -extern int max77693_read_reg(struct regmap *map, u8 reg, u8 *dest); -extern int max77693_bulk_read(struct regmap *map, u8 reg, int count, - u8 *buf); -extern int max77693_write_reg(struct regmap *map, u8 reg, u8 value); -extern int max77693_bulk_write(struct regmap *map, u8 reg, int count, - u8 *buf); -extern int max77693_update_reg(struct regmap *map, u8 reg, u8 val, u8 mask); - extern int max77693_irq_init(struct max77693_dev *max77686); extern void max77693_irq_exit(struct max77693_dev *max77686); extern int max77693_irq_resume(struct max77693_dev *max77686); -- cgit v1.2.3 From 342d669c1ee421323f552a62729d3a3d0065093c Mon Sep 17 00:00:00 2001 From: Robert Baldyga Date: Wed, 21 May 2014 08:52:48 +0200 Subject: mfd: max77693: Handle IRQs using regmap This patch modifies mfd driver to use regmap for handling interrupts. It allows to simplify irq handling process. This modifications needed to make small changes in function drivers, which use interrupts. Signed-off-by: Robert Baldyga Reviewed-by: Krzysztof Kozlowski Acked-by: Chanwoo Choi Signed-off-by: Lee Jones --- include/linux/mfd/max77693-private.h | 46 ++++++++++++++++++++++++++++++++++-- 1 file changed, 44 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/max77693-private.h b/include/linux/mfd/max77693-private.h index 80ec31d561c4..c466ff3e16b8 100644 --- a/include/linux/mfd/max77693-private.h +++ b/include/linux/mfd/max77693-private.h @@ -262,6 +262,41 @@ enum max77693_irq_source { MAX77693_IRQ_GROUP_NR, }; +#define LED_IRQ_FLED2_OPEN BIT(0) +#define LED_IRQ_FLED2_SHORT BIT(1) +#define LED_IRQ_FLED1_OPEN BIT(2) +#define LED_IRQ_FLED1_SHORT BIT(3) +#define LED_IRQ_MAX_FLASH BIT(4) + +#define TOPSYS_IRQ_T120C_INT BIT(0) +#define TOPSYS_IRQ_T140C_INT BIT(1) +#define TOPSYS_IRQ_LOWSYS_INT BIT(3) + +#define CHG_IRQ_BYP_I BIT(0) +#define CHG_IRQ_THM_I BIT(2) +#define CHG_IRQ_BAT_I BIT(3) +#define CHG_IRQ_CHG_I BIT(4) +#define CHG_IRQ_CHGIN_I BIT(6) + +#define MUIC_IRQ_INT1_ADC BIT(0) +#define MUIC_IRQ_INT1_ADC_LOW BIT(1) +#define MUIC_IRQ_INT1_ADC_ERR BIT(2) +#define MUIC_IRQ_INT1_ADC1K BIT(3) + +#define MUIC_IRQ_INT2_CHGTYP BIT(0) +#define MUIC_IRQ_INT2_CHGDETREUN BIT(1) +#define MUIC_IRQ_INT2_DCDTMR BIT(2) +#define MUIC_IRQ_INT2_DXOVP BIT(3) +#define MUIC_IRQ_INT2_VBVOLT BIT(4) +#define MUIC_IRQ_INT2_VIDRM BIT(5) + +#define MUIC_IRQ_INT3_EOC BIT(0) +#define MUIC_IRQ_INT3_CGMBC BIT(1) +#define MUIC_IRQ_INT3_OVP BIT(2) +#define MUIC_IRQ_INT3_MBCCHG_ERR BIT(3) +#define MUIC_IRQ_INT3_CHG_ENABLED BIT(4) +#define MUIC_IRQ_INT3_BAT_DET BIT(5) + enum max77693_irq { /* PMIC - FLASH */ MAX77693_LED_IRQ_FLED2_OPEN, @@ -282,6 +317,10 @@ enum max77693_irq { MAX77693_CHG_IRQ_CHG_I, MAX77693_CHG_IRQ_CHGIN_I, + MAX77693_IRQ_NR, +}; + +enum max77693_irq_muic { /* MUIC INT1 */ MAX77693_MUIC_IRQ_INT1_ADC, MAX77693_MUIC_IRQ_INT1_ADC_LOW, @@ -304,7 +343,7 @@ enum max77693_irq { MAX77693_MUIC_IRQ_INT3_CHG_ENABLED, MAX77693_MUIC_IRQ_INT3_BAT_DET, - MAX77693_IRQ_NR, + MAX77693_MUIC_IRQ_NR, }; struct max77693_dev { @@ -319,7 +358,10 @@ struct max77693_dev { struct regmap *regmap_muic; struct regmap *regmap_haptic; - struct irq_domain *irq_domain; + struct regmap_irq_chip_data *irq_data_led; + struct regmap_irq_chip_data *irq_data_topsys; + struct regmap_irq_chip_data *irq_data_charger; + struct regmap_irq_chip_data *irq_data_muic; int irq; int irq_gpio; -- cgit v1.2.3 From 914b881f9452fd615cc597b434fd8c0e12a7dae2 Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Thu, 22 May 2014 14:06:33 +0900 Subject: extcon: sm5502: Add support new SM5502 extcon device driver This patch add new SM5502 MUIC(Micro-USB Interface Controller) device by using EXTCON subsystem. The extcon-sm5502 driver is capable of identifying the type of the external power source and attached accessory. An external power sources, such as Deticated Charger or a standard USB port, are able to charge the battery in the smart phone via the connector. Signed-off-by: Chanwoo Choi --- include/linux/extcon/sm5502.h | 264 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 264 insertions(+) create mode 100644 include/linux/extcon/sm5502.h (limited to 'include/linux') diff --git a/include/linux/extcon/sm5502.h b/include/linux/extcon/sm5502.h new file mode 100644 index 000000000000..17bd6550c485 --- /dev/null +++ b/include/linux/extcon/sm5502.h @@ -0,0 +1,264 @@ +/* + * sm5502.h + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_EXTCON_SM5502_H +#define __LINUX_EXTCON_SM5502_H + +enum sm5502_types { + TYPE_SM5502, +}; + +/* SM5502 registers */ +enum sm5502_reg { + SM5502_REG_DEVICE_ID = 0x01, + SM5502_REG_CONTROL, + SM5502_REG_INT1, + SM5502_REG_INT2, + SM5502_REG_INTMASK1, + SM5502_REG_INTMASK2, + SM5502_REG_ADC, + SM5502_REG_TIMING_SET1, + SM5502_REG_TIMING_SET2, + SM5502_REG_DEV_TYPE1, + SM5502_REG_DEV_TYPE2, + SM5502_REG_BUTTON1, + SM5502_REG_BUTTON2, + SM5502_REG_CAR_KIT_STATUS, + SM5502_REG_RSVD1, + SM5502_REG_RSVD2, + SM5502_REG_RSVD3, + SM5502_REG_RSVD4, + SM5502_REG_MANUAL_SW1, + SM5502_REG_MANUAL_SW2, + SM5502_REG_DEV_TYPE3, + SM5502_REG_RSVD5, + SM5502_REG_RSVD6, + SM5502_REG_RSVD7, + SM5502_REG_RSVD8, + SM5502_REG_RSVD9, + SM5502_REG_RESET, + SM5502_REG_RSVD10, + SM5502_REG_RESERVED_ID1, + SM5502_REG_RSVD11, + SM5502_REG_RSVD12, + SM5502_REG_RESERVED_ID2, + SM5502_REG_RSVD13, + SM5502_REG_OCP, + SM5502_REG_RSVD14, + SM5502_REG_RSVD15, + SM5502_REG_RSVD16, + SM5502_REG_RSVD17, + SM5502_REG_RSVD18, + SM5502_REG_RSVD19, + SM5502_REG_RSVD20, + SM5502_REG_RSVD21, + SM5502_REG_RSVD22, + SM5502_REG_RSVD23, + SM5502_REG_RSVD24, + SM5502_REG_RSVD25, + SM5502_REG_RSVD26, + SM5502_REG_RSVD27, + SM5502_REG_RSVD28, + SM5502_REG_RSVD29, + SM5502_REG_RSVD30, + SM5502_REG_RSVD31, + SM5502_REG_RSVD32, + SM5502_REG_RSVD33, + SM5502_REG_RSVD34, + SM5502_REG_RSVD35, + SM5502_REG_RSVD36, + SM5502_REG_RESERVED_ID3, + + SM5502_REG_END, +}; + +/* Define SM5502 MASK/SHIFT constant */ +#define SM5502_REG_DEVICE_ID_VENDOR_SHIFT 0 +#define SM5502_REG_DEVICE_ID_VERSION_SHIFT 3 +#define SM5502_REG_DEVICE_ID_VENDOR_MASK (0x3 << SM5502_REG_DEVICE_ID_VENDOR_SHIFT) +#define SM5502_REG_DEVICE_ID_VERSION_MASK (0x1f << SM5502_REG_DEVICE_ID_VERSION_SHIFT) + +#define SM5502_REG_CONTROL_MASK_INT_SHIFT 0 +#define SM5502_REG_CONTROL_WAIT_SHIFT 1 +#define SM5502_REG_CONTROL_MANUAL_SW_SHIFT 2 +#define SM5502_REG_CONTROL_RAW_DATA_SHIFT 3 +#define SM5502_REG_CONTROL_SW_OPEN_SHIFT 4 +#define SM5502_REG_CONTROL_MASK_INT_MASK (0x1 << SM5502_REG_CONTROL_MASK_INT_SHIFT) +#define SM5502_REG_CONTROL_WAIT_MASK (0x1 << SM5502_REG_CONTROL_WAIT_SHIFT) +#define SM5502_REG_CONTROL_MANUAL_SW_MASK (0x1 << SM5502_REG_CONTROL_MANUAL_SW_SHIFT) +#define SM5502_REG_CONTROL_RAW_DATA_MASK (0x1 << SM5502_REG_CONTROL_RAW_DATA_SHIFT) +#define SM5502_REG_CONTROL_SW_OPEN_MASK (0x1 << SM5502_REG_CONTROL_SW_OPEN_SHIFT) + +#define SM5502_REG_INTM1_ATTACH_SHIFT 0 +#define SM5502_REG_INTM1_DETACH_SHIFT 1 +#define SM5502_REG_INTM1_KP_SHIFT 2 +#define SM5502_REG_INTM1_LKP_SHIFT 3 +#define SM5502_REG_INTM1_LKR_SHIFT 4 +#define SM5502_REG_INTM1_OVP_EVENT_SHIFT 5 +#define SM5502_REG_INTM1_OCP_EVENT_SHIFT 6 +#define SM5502_REG_INTM1_OVP_OCP_DIS_SHIFT 7 +#define SM5502_REG_INTM1_ATTACH_MASK (0x1 << SM5502_REG_INTM1_ATTACH_SHIFT) +#define SM5502_REG_INTM1_DETACH_MASK (0x1 << SM5502_REG_INTM1_DETACH_SHIFT) +#define SM5502_REG_INTM1_KP_MASK (0x1 << SM5502_REG_INTM1_KP_SHIFT) +#define SM5502_REG_INTM1_LKP_MASK (0x1 << SM5502_REG_INTM1_LKP_SHIFT) +#define SM5502_REG_INTM1_LKR_MASK (0x1 << SM5502_REG_INTM1_LKR_SHIFT) +#define SM5502_REG_INTM1_OVP_EVENT_MASK (0x1 << SM5502_REG_INTM1_OVP_EVENT_SHIFT) +#define SM5502_REG_INTM1_OCP_EVENT_MASK (0x1 << SM5502_REG_INTM1_OCP_EVENT_SHIFT) +#define SM5502_REG_INTM1_OVP_OCP_DIS_MASK (0x1 << SM5502_REG_INTM1_OVP_OCP_DIS_SHIFT) + +#define SM5502_REG_INTM2_VBUS_DET_SHIFT 0 +#define SM5502_REG_INTM2_REV_ACCE_SHIFT 1 +#define SM5502_REG_INTM2_ADC_CHG_SHIFT 2 +#define SM5502_REG_INTM2_STUCK_KEY_SHIFT 3 +#define SM5502_REG_INTM2_STUCK_KEY_RCV_SHIFT 4 +#define SM5502_REG_INTM2_MHL_SHIFT 5 +#define SM5502_REG_INTM2_VBUS_DET_MASK (0x1 << SM5502_REG_INTM2_VBUS_DET_SHIFT) +#define SM5502_REG_INTM2_REV_ACCE_MASK (0x1 << SM5502_REG_INTM2_REV_ACCE_SHIFT) +#define SM5502_REG_INTM2_ADC_CHG_MASK (0x1 << SM5502_REG_INTM2_ADC_CHG_SHIFT) +#define SM5502_REG_INTM2_STUCK_KEY_MASK (0x1 << SM5502_REG_INTM2_STUCK_KEY_SHIFT) +#define SM5502_REG_INTM2_STUCK_KEY_RCV_MASK (0x1 << SM5502_REG_INTM2_STUCK_KEY_RCV_SHIFT) +#define SM5502_REG_INTM2_MHL_MASK (0x1 << SM5502_REG_INTM2_MHL_SHIFT) + +#define SM5502_REG_ADC_SHIFT 0 +#define SM5502_REG_ADC_MASK (0x1f << SM5502_REG_ADC_SHIFT) + +#define SM5502_REG_TIMING_SET1_KEY_PRESS_SHIFT 4 +#define SM5502_REG_TIMING_SET1_KEY_PRESS_MASK (0xf << SM5502_REG_TIMING_SET1_KEY_PRESS_SHIFT) +#define TIMING_KEY_PRESS_100MS 0x0 +#define TIMING_KEY_PRESS_200MS 0x1 +#define TIMING_KEY_PRESS_300MS 0x2 +#define TIMING_KEY_PRESS_400MS 0x3 +#define TIMING_KEY_PRESS_500MS 0x4 +#define TIMING_KEY_PRESS_600MS 0x5 +#define TIMING_KEY_PRESS_700MS 0x6 +#define TIMING_KEY_PRESS_800MS 0x7 +#define TIMING_KEY_PRESS_900MS 0x8 +#define TIMING_KEY_PRESS_1000MS 0x9 +#define SM5502_REG_TIMING_SET1_ADC_DET_SHIFT 0 +#define SM5502_REG_TIMING_SET1_ADC_DET_MASK (0xf << SM5502_REG_TIMING_SET1_ADC_DET_SHIFT) +#define TIMING_ADC_DET_50MS 0x0 +#define TIMING_ADC_DET_100MS 0x1 +#define TIMING_ADC_DET_150MS 0x2 +#define TIMING_ADC_DET_200MS 0x3 +#define TIMING_ADC_DET_300MS 0x4 +#define TIMING_ADC_DET_400MS 0x5 +#define TIMING_ADC_DET_500MS 0x6 +#define TIMING_ADC_DET_600MS 0x7 +#define TIMING_ADC_DET_700MS 0x8 +#define TIMING_ADC_DET_800MS 0x9 +#define TIMING_ADC_DET_900MS 0xA +#define TIMING_ADC_DET_1000MS 0xB + +#define SM5502_REG_TIMING_SET2_SW_WAIT_SHIFT 4 +#define SM5502_REG_TIMING_SET2_SW_WAIT_MASK (0xf << SM5502_REG_TIMING_SET2_SW_WAIT_SHIFT) +#define TIMING_SW_WAIT_10MS 0x0 +#define TIMING_SW_WAIT_30MS 0x1 +#define TIMING_SW_WAIT_50MS 0x2 +#define TIMING_SW_WAIT_70MS 0x3 +#define TIMING_SW_WAIT_90MS 0x4 +#define TIMING_SW_WAIT_110MS 0x5 +#define TIMING_SW_WAIT_130MS 0x6 +#define TIMING_SW_WAIT_150MS 0x7 +#define TIMING_SW_WAIT_170MS 0x8 +#define TIMING_SW_WAIT_190MS 0x9 +#define TIMING_SW_WAIT_210MS 0xA +#define SM5502_REG_TIMING_SET2_LONG_KEY_SHIFT 0 +#define SM5502_REG_TIMING_SET2_LONG_KEY_MASK (0xf << SM5502_REG_TIMING_SET2_LONG_KEY_SHIFT) +#define TIMING_LONG_KEY_300MS 0x0 +#define TIMING_LONG_KEY_400MS 0x1 +#define TIMING_LONG_KEY_500MS 0x2 +#define TIMING_LONG_KEY_600MS 0x3 +#define TIMING_LONG_KEY_700MS 0x4 +#define TIMING_LONG_KEY_800MS 0x5 +#define TIMING_LONG_KEY_900MS 0x6 +#define TIMING_LONG_KEY_1000MS 0x7 +#define TIMING_LONG_KEY_1100MS 0x8 +#define TIMING_LONG_KEY_1200MS 0x9 +#define TIMING_LONG_KEY_1300MS 0xA +#define TIMING_LONG_KEY_1400MS 0xB +#define TIMING_LONG_KEY_1500MS 0xC + +#define SM5502_REG_DEV_TYPE1_AUDIO_TYPE1_SHIFT 0 +#define SM5502_REG_DEV_TYPE1_AUDIO_TYPE2_SHIFT 1 +#define SM5502_REG_DEV_TYPE1_USB_SDP_SHIFT 2 +#define SM5502_REG_DEV_TYPE1_UART_SHIFT 3 +#define SM5502_REG_DEV_TYPE1_CAR_KIT_CHARGER_SHIFT 4 +#define SM5502_REG_DEV_TYPE1_USB_CHG_SHIFT 5 +#define SM5502_REG_DEV_TYPE1_DEDICATED_CHG_SHIFT 6 +#define SM5502_REG_DEV_TYPE1_USB_OTG_SHIFT 7 +#define SM5502_REG_DEV_TYPE1_AUDIO_TYPE1_MASK (0x1 << SM5502_REG_DEV_TYPE1_AUDIO_TYPE1_SHIFT) +#define SM5502_REG_DEV_TYPE1_AUDIO_TYPE1__MASK (0x1 << SM5502_REG_DEV_TYPE1_AUDIO_TYPE2_SHIFT) +#define SM5502_REG_DEV_TYPE1_USB_SDP_MASK (0x1 << SM5502_REG_DEV_TYPE1_USB_SDP_SHIFT) +#define SM5502_REG_DEV_TYPE1_UART_MASK (0x1 << SM5502_REG_DEV_TYPE1_UART_SHIFT) +#define SM5502_REG_DEV_TYPE1_CAR_KIT_CHARGER_MASK (0x1 << SM5502_REG_DEV_TYPE1_CAR_KIT_CHARGER_SHIFT) +#define SM5502_REG_DEV_TYPE1_USB_CHG_MASK (0x1 << SM5502_REG_DEV_TYPE1_USB_CHG_SHIFT) +#define SM5502_REG_DEV_TYPE1_DEDICATED_CHG_MASK (0x1 << SM5502_REG_DEV_TYPE1_DEDICATED_CHG_SHIFT) +#define SM5502_REG_DEV_TYPE1_USB_OTG_MASK (0x1 << SM5502_REG_DEV_TYPE1_USB_OTG_SHIFT) + +#define SM5502_REG_DEV_TYPE2_JIG_USB_ON_SHIFT 0 +#define SM5502_REG_DEV_TYPE2_JIG_USB_OFF_SHIFT 1 +#define SM5502_REG_DEV_TYPE2_JIG_UART_ON_SHIFT 2 +#define SM5502_REG_DEV_TYPE2_JIG_UART_OFF_SHIFT 3 +#define SM5502_REG_DEV_TYPE2_PPD_SHIFT 4 +#define SM5502_REG_DEV_TYPE2_TTY_SHIFT 5 +#define SM5502_REG_DEV_TYPE2_AV_CABLE_SHIFT 6 +#define SM5502_REG_DEV_TYPE2_JIG_USB_ON_MASK (0x1 << SM5502_REG_DEV_TYPE2_JIG_USB_ON_SHIFT) +#define SM5502_REG_DEV_TYPE2_JIG_USB_OFF_MASK (0x1 << SM5502_REG_DEV_TYPE2_JIG_USB_OFF_SHIFT) +#define SM5502_REG_DEV_TYPE2_JIG_UART_ON_MASK (0x1 << SM5502_REG_DEV_TYPE2_JIG_UART_ON_SHIFT) +#define SM5502_REG_DEV_TYPE2_JIG_UART_OFF_MASK (0x1 << SM5502_REG_DEV_TYPE2_JIG_UART_OFF_SHIFT) +#define SM5502_REG_DEV_TYPE2_PPD_MASK (0x1 << SM5502_REG_DEV_TYPE2_PPD_SHIFT) +#define SM5502_REG_DEV_TYPE2_TTY_MASK (0x1 << SM5502_REG_DEV_TYPE2_TTY_SHIFT) +#define SM5502_REG_DEV_TYPE2_AV_CABLE_MASK (0x1 << SM5502_REG_DEV_TYPE2_AV_CABLE_SHIFT) + +/* SM5502 Interrupts */ +enum sm5502_irq { + /* INT1 */ + SM5502_IRQ_INT1_ATTACH, + SM5502_IRQ_INT1_DETACH, + SM5502_IRQ_INT1_KP, + SM5502_IRQ_INT1_LKP, + SM5502_IRQ_INT1_LKR, + SM5502_IRQ_INT1_OVP_EVENT, + SM5502_IRQ_INT1_OCP_EVENT, + SM5502_IRQ_INT1_OVP_OCP_DIS, + + /* INT2 */ + SM5502_IRQ_INT2_VBUS_DET, + SM5502_IRQ_INT2_REV_ACCE, + SM5502_IRQ_INT2_ADC_CHG, + SM5502_IRQ_INT2_STUCK_KEY, + SM5502_IRQ_INT2_STUCK_KEY_RCV, + SM5502_IRQ_INT2_MHL, + + SM5502_IRQ_NUM, +}; + +#define SM5502_IRQ_INT1_ATTACH_MASK BIT(0) +#define SM5502_IRQ_INT1_DETACH_MASK BIT(1) +#define SM5502_IRQ_INT1_KP_MASK BIT(2) +#define SM5502_IRQ_INT1_LKP_MASK BIT(3) +#define SM5502_IRQ_INT1_LKR_MASK BIT(4) +#define SM5502_IRQ_INT1_OVP_EVENT_MASK BIT(5) +#define SM5502_IRQ_INT1_OCP_EVENT_MASK BIT(6) +#define SM5502_IRQ_INT1_OVP_OCP_DIS_MASK BIT(7) +#define SM5502_IRQ_INT2_VBUS_DET_MASK BIT(0) +#define SM5502_IRQ_INT2_REV_ACCE_MASK BIT(1) +#define SM5502_IRQ_INT2_ADC_CHG_MASK BIT(2) +#define SM5502_IRQ_INT2_STUCK_KEY_MASK BIT(3) +#define SM5502_IRQ_INT2_STUCK_KEY_RCV_MASK BIT(4) +#define SM5502_IRQ_INT2_MHL_MASK BIT(5) + +#endif /* __LINUX_EXTCON_SM5502_H */ -- cgit v1.2.3 From a75fed2ee6c187ab32b1cb01882c1032c4c9e4a8 Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Wed, 28 May 2014 15:35:29 +0900 Subject: extcon: sm5502: Change internal hardware switch according to cable type This patch changes internal hardware DP_CON/DM_CON switch according to cable type. The SM5502 MUIC device can set hardware switch as following: - OPEN (not connected state) / USB / UART / AUDIO Also, this patch set VBUSIN switch according to cable type. Signed-off-by: Chanwoo Choi --- include/linux/extcon/sm5502.h | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'include/linux') diff --git a/include/linux/extcon/sm5502.h b/include/linux/extcon/sm5502.h index 17bd6550c485..030526bf8d79 100644 --- a/include/linux/extcon/sm5502.h +++ b/include/linux/extcon/sm5502.h @@ -223,6 +223,29 @@ enum sm5502_reg { #define SM5502_REG_DEV_TYPE2_TTY_MASK (0x1 << SM5502_REG_DEV_TYPE2_TTY_SHIFT) #define SM5502_REG_DEV_TYPE2_AV_CABLE_MASK (0x1 << SM5502_REG_DEV_TYPE2_AV_CABLE_SHIFT) +#define SM5502_REG_MANUAL_SW1_VBUSIN_SHIFT 0 +#define SM5502_REG_MANUAL_SW1_DP_SHIFT 2 +#define SM5502_REG_MANUAL_SW1_DM_SHIFT 5 +#define SM5502_REG_MANUAL_SW1_VBUSIN_MASK (0x3 << SM5502_REG_MANUAL_SW1_VBUSIN_SHIFT) +#define SM5502_REG_MANUAL_SW1_DP_MASK (0x7 << SM5502_REG_MANUAL_SW1_DP_SHIFT) +#define SM5502_REG_MANUAL_SW1_DM_MASK (0x7 << SM5502_REG_MANUAL_SW1_DM_SHIFT) +#define VBUSIN_SWITCH_OPEN 0x0 +#define VBUSIN_SWITCH_VBUSOUT 0x1 +#define VBUSIN_SWITCH_MIC 0x2 +#define VBUSIN_SWITCH_VBUSOUT_WITH_USB 0x3 +#define DM_DP_CON_SWITCH_OPEN 0x0 +#define DM_DP_CON_SWITCH_USB 0x1 +#define DM_DP_CON_SWITCH_AUDIO 0x2 +#define DM_DP_CON_SWITCH_UART 0x3 +#define DM_DP_SWITCH_OPEN ((DM_DP_CON_SWITCH_OPEN <