From 411fdaf846afb0be1b54383c184f58a42fa416ff Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 17 Feb 2015 01:46:49 +0000 Subject: dmaengine: shdma: use normal interface for passing slave id in dma_slave_config, which is incompatible with the way that the dmaengine API normally works. I've had a closer look at the existing code now and found that all slave drivers that pass a slave_id in dma_slave_config for SH do that right after passing the same ID into shdma_chan_filter, so we can just rely on that. However, the various shdma drivers currently do not remember the slave ID that was passed into the filter function when used in non-DT mode and only check the value to find a matching channel, unlike all other drivers. There might still be drivers that are not part of the kernel that rely on setting the slave_id to some other value, so to be on the safe side, this adds another 'real_slave_id' field to shdma_chan that remembers the ID and uses it when a driver passes a zero slave_id in dma_slave_config, like most drivers do. Eventually, the real_slave_id and slave_id fields should just get merged into one field, but that requires other changes. Signed-off-by: Arnd Bergmann Signed-off-by: Kuninori Morimoto Signed-off-by: Vinod Koul --- include/linux/shdma-base.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/shdma-base.h b/include/linux/shdma-base.h index abdf1f229dc3..dd0ba502ccb3 100644 --- a/include/linux/shdma-base.h +++ b/include/linux/shdma-base.h @@ -69,6 +69,7 @@ struct shdma_chan { int id; /* Raw id of this channel */ int irq; /* Channel IRQ */ int slave_id; /* Client ID for slave DMA */ + int real_slave_id; /* argument passed to filter function */ int hw_req; /* DMA request line for slave DMA - same * as MID/RID, used with DT */ enum shdma_pm_state pm_state; -- cgit v1.2.3 From 1b84f2a4cd4a6f517a313261f6f7c8caae5696c6 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Mon, 2 Feb 2015 12:26:22 +0100 Subject: mfd: cros_ec: Use fixed size arrays to transfer data with the EC The struct cros_ec_command will be used as an ioctl() argument for the API to control the ChromeOS EC from user-space. So the data structure has to be 64-bit safe to make it compatible between 32 and 64 avoiding the need for a compat ioctl interface. Since pointers are self-aligned to different byte boundaries, use fixed size arrays instead of pointers for transferring ingoing and outgoing data with the Embedded Controller. Also, re-arrange struct members by decreasing alignment requirements to reduce the needing padding size. Signed-off-by: Javier Martinez Canillas Acked-by: Lee Jones Tested-by: Gwendal Grignou Reviewed-by: Gwendal Grignou Signed-off-by: Olof Johansson --- include/linux/mfd/cros_ec.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h index 0e166b92f5b4..71675b14b5ca 100644 --- a/include/linux/mfd/cros_ec.h +++ b/include/linux/mfd/cros_ec.h @@ -38,20 +38,20 @@ enum { /* * @version: Command version number (often 0) * @command: Command to send (EC_CMD_...) - * @outdata: Outgoing data to EC * @outsize: Outgoing length in bytes - * @indata: Where to put the incoming data from EC * @insize: Max number of bytes to accept from EC * @result: EC's response to the command (separate from communication failure) + * @outdata: Outgoing data to EC + * @indata: Where to put the incoming data from EC */ struct cros_ec_command { uint32_t version; uint32_t command; - uint8_t *outdata; uint32_t outsize; - uint8_t *indata; uint32_t insize; uint32_t result; + uint8_t outdata[EC_PROTO2_MAX_PARAM_SIZE]; + uint8_t indata[EC_PROTO2_MAX_PARAM_SIZE]; }; /** -- cgit v1.2.3 From 05c11ac4e0712def44cccbff82ad980d9e1d1b80 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Mon, 2 Feb 2015 12:26:23 +0100 Subject: mfd: cros_ec: Add char dev and virtual dev pointers The ChromeOS Embedded Controller has to be accessed by applications. A virtual character device is used as an interface with user-space. Extend the struct cros_ec_device with the fields needed by the driver of this virtual character device. Signed-off-by: Javier Martinez Canillas Acked-by: Lee Jones Tested-by: Gwendal Grignou Reviewed-by: Gwendal Grignou Signed-off-by: Olof Johansson --- include/linux/mfd/cros_ec.h | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h index 71675b14b5ca..324a34683971 100644 --- a/include/linux/mfd/cros_ec.h +++ b/include/linux/mfd/cros_ec.h @@ -16,6 +16,7 @@ #ifndef __LINUX_MFD_CROS_EC_H #define __LINUX_MFD_CROS_EC_H +#include #include #include #include @@ -59,9 +60,17 @@ struct cros_ec_command { * * @ec_name: name of EC device (e.g. 'chromeos-ec') * @phys_name: name of physical comms layer (e.g. 'i2c-4') - * @dev: Device pointer + * @dev: Device pointer for physical comms device + * @vdev: Device pointer for virtual comms device + * @cdev: Character device structure for virtual comms device * @was_wake_device: true if this device was set to wake the system from * sleep at the last suspend + * @cmd_readmem: direct read of the EC memory-mapped region, if supported + * @offset is within EC_LPC_ADDR_MEMMAP region. + * @bytes: number of bytes to read. zero means "read a string" (including + * the trailing '\0'). At most only EC_MEMMAP_SIZE bytes can be read. + * Caller must ensure that the buffer is large enough for the result when + * reading a string. * * @priv: Private data * @irq: Interrupt to use @@ -90,8 +99,12 @@ struct cros_ec_device { const char *ec_name; const char *phys_name; struct device *dev; + struct device *vdev; + struct cdev cdev; bool was_wake_device; struct class *cros_class; + int (*cmd_readmem)(struct cros_ec_device *ec, unsigned int offset, + unsigned int bytes, void *dest); /* These are used to implement the platform-specific interface */ void *priv; -- cgit v1.2.3 From 6232c51cb370919b116e0aea38d12aa33aae2fa9 Mon Sep 17 00:00:00 2001 From: Ulrich Hecht Date: Thu, 26 Feb 2015 17:42:07 +0100 Subject: ARM: shmobile: r8a7778: common clock framework CPG driver Driver for the r8a7778's clocks that depend on the mode bits. Signed-off-by: Ulrich Hecht Acked-by: Laurent Pinchart Acked-by: Michael Turquette Signed-off-by: Simon Horman --- include/linux/clk/shmobile.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/clk/shmobile.h b/include/linux/clk/shmobile.h index 9f8a14041dd5..63a8159c4e64 100644 --- a/include/linux/clk/shmobile.h +++ b/include/linux/clk/shmobile.h @@ -16,6 +16,7 @@ #include +void r8a7778_clocks_init(u32 mode); void r8a7779_clocks_init(u32 mode); void rcar_gen2_clocks_init(u32 mode); -- cgit v1.2.3 From bc63b6f634d91a0b2a7f3ba4f266e55fec369de3 Mon Sep 17 00:00:00 2001 From: Vitaly Kuznetsov Date: Fri, 27 Feb 2015 11:25:52 -0800 Subject: Drivers: hv: vmbus: rename channel work queues All channel work queues are named 'hv_vmbus_ctl', this makes them indistinguishable in ps output and makes it hard to link to the corresponding vmbus device. Rename them to hv_vmbus_ctl/N and make vmbus device names match, e.g. now vmbus_1 device is served by hv_vmbus_ctl/1 work queue. Signed-off-by: Vitaly Kuznetsov Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- include/linux/hyperv.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index 5a2ba674795e..26a32b771ee5 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -646,6 +646,9 @@ struct hv_input_signal_event_buffer { }; struct vmbus_channel { + /* Unique channel id */ + int id; + struct list_head listentry; struct hv_device *device_obj; -- cgit v1.2.3 From 04653a009a63d6a91c60a5449ea97e3ed5e1dc29 Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Fri, 27 Feb 2015 11:26:05 -0800 Subject: Drivers: hv: vmbus: Add support for the NetworkDirect GUID NetworkDirect is a service that supports guest RDMA. Define the GUID for this service. Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- include/linux/hyperv.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux') diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index 26a32b771ee5..7d976ac01fac 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -1109,6 +1109,16 @@ void vmbus_driver_unregister(struct hv_driver *hv_driver); 0x9A, 0xE7, 0x6B, 0x17, 0x49, 0x77, 0xC1, 0x92 \ } +/* + * NetworkDirect. This is the guest RDMA service. + * {8c2eaf3d-32a7-4b09-ab99-bd1f1c86b501} + */ +#define HV_ND_GUID \ + .guid = { \ + 0x3d, 0xaf, 0x2e, 0x8c, 0xa7, 0x32, 0x09, 0x4b, \ + 0xab, 0x99, 0xbd, 0x1f, 0x1c, 0x86, 0xb5, 0x01 \ + } + /* * Common header for Hyper-V ICs */ -- cgit v1.2.3 From ed6cfcc5fdf2ebca320b6f74c836e555e18216e1 Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Sat, 28 Feb 2015 11:18:17 -0800 Subject: Drivers: hv: vmbus: Introduce a function to remove a rescinded offer In response to a rescind message, we need to remove the channel and the corresponding device. Cleanup this code path by factoring out the code to remove a channel. Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- include/linux/hyperv.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index 7d976ac01fac..dd92a854c700 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -1226,6 +1226,7 @@ void hv_kvp_onchannelcallback(void *); int hv_vss_init(struct hv_util_service *); void hv_vss_deinit(void); void hv_vss_onchannelcallback(void *); +void hv_process_channel_removal(struct vmbus_channel *channel, u32 relid); extern struct resource hyperv_mmio; -- cgit v1.2.3 From a13e8bbe851a96a0e78c2bd599bc34082fa697cd Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Sat, 28 Feb 2015 11:39:02 -0800 Subject: Drivers: hv: vmbus: Use a round-robin algorithm for picking the outgoing channel The current algorithm for picking an outgoing channel was not distributing the load well. Implement a simple round-robin scheme to ensure good distribution of the outgoing traffic. Signed-off-by: K. Y. Srinivasan Reviewed-by: Long Li Signed-off-by: Greg Kroah-Hartman --- include/linux/hyperv.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index dd92a854c700..1ca582457076 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -761,6 +761,9 @@ struct vmbus_channel { * link up channels based on their CPU affinity. */ struct list_head percpu_list; + + int num_sc; + int next_oc; }; static inline void set_channel_read_state(struct vmbus_channel *c, bool state) -- cgit v1.2.3 From 87e93d61708fe2c44875d1ecdb174aad070dbd08 Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Sat, 28 Feb 2015 11:39:03 -0800 Subject: Drivers: hv: vmbus: Suport an API to send pagebuffers with additional control Implement an API for sending pagebuffers that gives more control to the client in terms of setting the vmbus flags as well as deciding when to notify the host. This will be useful for enabling batch processing. Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- include/linux/hyperv.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/linux') diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index 1ca582457076..86e1a7a46af3 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -874,6 +874,15 @@ extern int vmbus_sendpacket_pagebuffer(struct vmbus_channel *channel, u32 bufferlen, u64 requestid); +extern int vmbus_sendpacket_pagebuffer_ctl(struct vmbus_channel *channel, + struct hv_page_buffer pagebuffers[], + u32 pagecount, + void *buffer, + u32 bufferlen, + u64 requestid, + u32 flags, + bool kick_q); + extern int vmbus_sendpacket_multipagebuffer(struct vmbus_channel *channel, struct hv_multipage_buffer *mpb, void *buffer, -- cgit v1.2.3 From e9395e3f8952110bda60b54ad03ec52c6e9c7dbd Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Sat, 28 Feb 2015 11:39:04 -0800 Subject: Drivers: hv: vmbus: Suport an API to send packet with additional control Implement an API that gives additional control on the what VMBUS flags will be set as well as if the host needs to be signalled. This API will be useful for clients that want to batch up requests to the host. Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- include/linux/hyperv.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index 86e1a7a46af3..80e444bfc9dc 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -867,6 +867,14 @@ extern int vmbus_sendpacket(struct vmbus_channel *channel, enum vmbus_packet_type type, u32 flags); +extern int vmbus_sendpacket_ctl(struct vmbus_channel *channel, + void *buffer, + u32 bufferLen, + u64 requestid, + enum vmbus_packet_type type, + u32 flags, + bool kick_q); + extern int vmbus_sendpacket_pagebuffer(struct vmbus_channel *channel, struct hv_page_buffer pagebuffers[], u32 pagecount, -- cgit v1.2.3 From 5f80e19081e233698c8ea77ed2dd84a66f49fc54 Mon Sep 17 00:00:00 2001 From: Liu Ying Date: Thu, 12 Feb 2015 14:01:25 +0800 Subject: ARM: imx6q: Add GPR3 MIPI muxing control register field shift bits definition This patch adds a macro to define the GPR3 MIPI muxing control register field shift bits. Signed-off-by: Liu Ying Signed-off-by: Shawn Guo --- include/linux/mfd/syscon/imx6q-iomuxc-gpr.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h index c877cad61a13..d16f4c82c568 100644 --- a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h +++ b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h @@ -207,6 +207,7 @@ #define IMX6Q_GPR3_LVDS0_MUX_CTL_IPU1_DI1 (0x1 << 6) #define IMX6Q_GPR3_LVDS0_MUX_CTL_IPU2_DI0 (0x2 << 6) #define IMX6Q_GPR3_LVDS0_MUX_CTL_IPU2_DI1 (0x3 << 6) +#define IMX6Q_GPR3_MIPI_MUX_CTL_SHIFT 4 #define IMX6Q_GPR3_MIPI_MUX_CTL_MASK (0x3 << 4) #define IMX6Q_GPR3_MIPI_MUX_CTL_IPU1_DI0 (0x0 << 4) #define IMX6Q_GPR3_MIPI_MUX_CTL_IPU1_DI1 (0x1 << 4) -- cgit v1.2.3 From 559addc25b00ff3a40eff03a0b3873c2b6d726f8 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 4 Feb 2015 06:07:30 -0300 Subject: [media] fixp-arith: replace sin/cos table by a better precision one The cos table used at fixp-arith.h has only 8 bits of precision. That causes problems if it is reused on other drivers. As some media drivers require a higher precision sin/cos implementation, replace the current implementation by one that will provide 32 bits precision. The values generated by the new implementation matches the 32 bit precision of glibc's sin for an angle measured in integer degrees. It also provides support for fractional angles via linear interpolation. On experimental calculus, when used a table with a 0.001 degree angle, the maximum error for sin is 0.000038, which is likely good enough for practical purposes. There are some logic there that seems to be specific to the usage inside ff-memless.c. Move those logic to there, as they're not needed elsewhere. Cc: Hans de Goede Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Prashant Laddha Signed-off-by: Hans Verkuil Acked-by: Dmitry Torokhov Signed-off-by: Mauro Carvalho Chehab --- include/linux/fixp-arith.h | 145 +++++++++++++++++++++++++++++++++------------ 1 file changed, 107 insertions(+), 38 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fixp-arith.h b/include/linux/fixp-arith.h index 3089d7382325..d4686fe1cac7 100644 --- a/include/linux/fixp-arith.h +++ b/include/linux/fixp-arith.h @@ -1,6 +1,8 @@ #ifndef _FIXP_ARITH_H #define _FIXP_ARITH_H +#include + /* * Simplistic fixed-point arithmetics. * Hmm, I'm probably duplicating some code :( @@ -29,59 +31,126 @@ #include -/* The type representing fixed-point values */ -typedef s16 fixp_t; +static const s32 sin_table[] = { + 0x00000000, 0x023be165, 0x04779632, 0x06b2f1d2, 0x08edc7b6, 0x0b27eb5c, + 0x0d61304d, 0x0f996a26, 0x11d06c96, 0x14060b67, 0x163a1a7d, 0x186c6ddd, + 0x1a9cd9ac, 0x1ccb3236, 0x1ef74bf2, 0x2120fb82, 0x234815ba, 0x256c6f9e, + 0x278dde6e, 0x29ac379f, 0x2bc750e8, 0x2ddf003f, 0x2ff31bdd, 0x32037a44, + 0x340ff241, 0x36185aee, 0x381c8bb5, 0x3a1c5c56, 0x3c17a4e7, 0x3e0e3ddb, + 0x3fffffff, 0x41ecc483, 0x43d464fa, 0x45b6bb5d, 0x4793a20f, 0x496af3e1, + 0x4b3c8c11, 0x4d084650, 0x4ecdfec6, 0x508d9210, 0x5246dd48, 0x53f9be04, + 0x55a6125a, 0x574bb8e5, 0x58ea90c2, 0x5a827999, 0x5c135399, 0x5d9cff82, + 0x5f1f5ea0, 0x609a52d1, 0x620dbe8a, 0x637984d3, 0x64dd894f, 0x6639b039, + 0x678dde6d, 0x68d9f963, 0x6a1de735, 0x6b598ea1, 0x6c8cd70a, 0x6db7a879, + 0x6ed9eba0, 0x6ff389de, 0x71046d3c, 0x720c8074, 0x730baeec, 0x7401e4bf, + 0x74ef0ebb, 0x75d31a5f, 0x76adf5e5, 0x777f903b, 0x7847d908, 0x7906c0af, + 0x79bc384c, 0x7a6831b8, 0x7b0a9f8c, 0x7ba3751c, 0x7c32a67c, 0x7cb82884, + 0x7d33f0c8, 0x7da5f5a3, 0x7e0e2e31, 0x7e6c924f, 0x7ec11aa3, 0x7f0bc095, + 0x7f4c7e52, 0x7f834ecf, 0x7fb02dc4, 0x7fd317b3, 0x7fec09e1, 0x7ffb025e, + 0x7fffffff +}; -#define FRAC_N 8 -#define FRAC_MASK ((1< 180) { + negative = true; + degrees -= 180; + } + if (degrees > 90) + degrees = 180 - degrees; + ret = sin_table[degrees]; -/* a: 123 -> 123.0 */ -static inline fixp_t fixp_new(s16 a) -{ - return a< -1.0 - 0x8000 -> 1.0 - 0x0000 -> 0.0 -*/ -static inline fixp_t fixp_new16(s16 a) +/** + * fixp_sin32() returns the sin of an angle in degrees + * + * @degrees: angle, in degrees. The angle can be positive or negative + * + * The returned value ranges from -0x7fffffff to +0x7fffffff. + */ +static inline s32 fixp_sin32(int degrees) { - return ((s32)a)>>(16-FRAC_N); + degrees = (degrees % 360 + 360) % 360; + + return __fixp_sin32(degrees); } -static inline fixp_t fixp_cos(unsigned int degrees) +/* cos(x) = sin(x + 90 degrees) */ +#define fixp_cos32(v) fixp_sin32((v) + 90) + +/* + * 16 bits variants + * + * The returned value ranges from -0x7fff to 0x7fff + */ + +#define fixp_sin16(v) (fixp_sin32(v) >> 16) +#define fixp_cos16(v) (fixp_cos32(v) >> 16) + +/** + * fixp_sin32_rad() - calculates the sin of an angle in radians + * + * @radians: angle, in radians + * @twopi: value to be used for 2*pi + * + * Provides a variant for the cases where just 360 + * values is not enough. This function uses linear + * interpolation to a wider range of values given by + * twopi var. + * + * Experimental tests gave a maximum difference of + * 0.000038 between the value calculated by sin() and + * the one produced by this function, when twopi is + * equal to 360000. That seems to be enough precision + * for practical purposes. + * + * Please notice that two high numbers for twopi could cause + * overflows, so the routine will not allow values of twopi + * bigger than 1^18. + */ +static inline s32 fixp_sin32_rad(u32 radians, u32 twopi) { - int quadrant = (degrees / 90) & 3; - unsigned int i = degrees % 90; + int degrees; + s32 v1, v2, dx, dy; + s64 tmp; - if (quadrant == 1 || quadrant == 3) - i = 90 - i; + /* + * Avoid too large values for twopi, as we don't want overflows. + */ + BUG_ON(twopi > 1 << 18); - i >>= 1; + degrees = (radians * 360) / twopi; + tmp = radians - (degrees * twopi) / 360; - return (quadrant == 1 || quadrant == 2)? -cos_table[i] : cos_table[i]; -} + degrees = (degrees % 360 + 360) % 360; + v1 = __fixp_sin32(degrees); -static inline fixp_t fixp_sin(unsigned int degrees) -{ - return -fixp_cos(degrees + 90); -} + v2 = fixp_sin32(degrees + 1); -static inline fixp_t fixp_mult(fixp_t a, fixp_t b) -{ - return ((s32)(a*b))>>FRAC_N; + dx = twopi / 360; + dy = v2 - v1; + + tmp *= dy; + + return v1 + div_s64(tmp, dx); } +/* cos(x) = sin(x + pi/2 radians) */ + +#define fixp_cos32_rad(rad, twopi) \ + fixp_sin32_rad(rad + twopi / 4, twopi) + #endif -- cgit v1.2.3 From 112bdfaa525fd5993e17885861342893f15290b0 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Mon, 16 Feb 2015 15:41:02 +0000 Subject: extcon: arizona: Deobfuscate arizona_extcon_do_magic arizona_extcon_do_magic does not lend a lot of clarity to the purpose of the function, and as all the registers used are described in the datasheet there is no need to obfuscate the code. This patch renames the function to arizona_extcon_hp_clamp, as it controls clamping on the headphone output. Signed-off-by: Charles Keepax Acked-by: Lee Jones Signed-off-by: Chanwoo Choi --- include/linux/mfd/arizona/core.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mfd/arizona/core.h b/include/linux/mfd/arizona/core.h index 910e3aa1e965..4863548faff7 100644 --- a/include/linux/mfd/arizona/core.h +++ b/include/linux/mfd/arizona/core.h @@ -126,7 +126,7 @@ struct arizona { struct regmap_irq_chip_data *aod_irq_chip; struct regmap_irq_chip_data *irq_chip; - bool hpdet_magic; + bool hpdet_clamp; unsigned int hp_ena; struct mutex clk_lock; -- cgit v1.2.3 From e921eea8e7d4457f424bc3f821cb836e35b91f88 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 3 Mar 2015 12:05:00 +0100 Subject: dmaengine: Remove memset leftovers Commit 48a9db462d99 ("drivers/dma: remove unused support for MEMSET operations") removed support for the memset operation in dmaengine, but left the fill_aligned field that was supposed to set the buffer alignment for the memset operations. Remove that field too. Signed-off-by: Maxime Ripard Signed-off-by: Vinod Koul --- include/linux/dmaengine.h | 8 -------- 1 file changed, 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index b6997a0cb528..db0104b0da4d 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -574,7 +574,6 @@ struct dma_tx_state { * @copy_align: alignment shift for memcpy operations * @xor_align: alignment shift for xor operations * @pq_align: alignment shift for pq operations - * @fill_align: alignment shift for memset operations * @dev_id: unique device ID * @dev: struct device reference for dma mapping api * @src_addr_widths: bit mask of src addr widths the device supports @@ -625,7 +624,6 @@ struct dma_device { u8 copy_align; u8 xor_align; u8 pq_align; - u8 fill_align; #define DMA_HAS_PQ_CONTINUE (1 << 15) int dev_id; @@ -826,12 +824,6 @@ static inline bool is_dma_pq_aligned(struct dma_device *dev, size_t off1, return dmaengine_check_align(dev->pq_align, off1, off2, len); } -static inline bool is_dma_fill_aligned(struct dma_device *dev, size_t off1, - size_t off2, size_t len) -{ - return dmaengine_check_align(dev->fill_align, off1, off2, len); -} - static inline void dma_set_maxpq(struct dma_device *dma, int maxpq, int has_pq_continue) { -- cgit v1.2.3 From 68c062eaa87b7b85b65f20f25c54524437715a95 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Thu, 5 Mar 2015 11:42:43 +0100 Subject: dmaengine: Remove net_dma leftovers Commit 7bce d397 510a ("net_dma: simple removal") removed the net_dma support entirely but left some functions and prototypes in the dmaengine header. Remove them. Signed-off-by: Maxime Ripard Signed-off-by: Vinod Koul --- include/linux/dmaengine.h | 23 ----------------------- 1 file changed, 23 deletions(-) (limited to 'include/linux') diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index db0104b0da4d..f5cc5d4f1ad5 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -1108,27 +1108,4 @@ static inline struct dma_chan return __dma_request_channel(mask, fn, fn_param); } - -/* --- Helper iov-locking functions --- */ - -struct dma_page_list { - char __user *base_address; - int nr_pages; - struct page **pages; -}; - -struct dma_pinned_list { - int nr_iovecs; - struct dma_page_list page_list[0]; -}; - -struct dma_pinned_list *dma_pin_iovec_pages(struct iovec *iov, size_t len); -void dma_unpin_iovec_pages(struct dma_pinned_list* pinned_list); - -dma_cookie_t dma_memcpy_to_iovec(struct dma_chan *chan, struct iovec *iov, - struct dma_pinned_list *pinned_list, unsigned char *kdata, size_t len); -dma_cookie_t dma_memcpy_pg_to_iovec(struct dma_chan *chan, struct iovec *iov, - struct dma_pinned_list *pinned_list, struct page *page, - unsigned int offset, size_t len); - #endif /* DMAENGINE_H */ -- cgit v1.2.3 From bfde98bd762346639f0a5a557e02c4828dd6273b Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Thu, 5 Mar 2015 11:48:50 +0100 Subject: dmaengine: Remove net_dma_find_channel Since commit 7bced397510a ("net_dma: simple removal") removed the net_dma support entirely, net_dma_find_channel has no users left. Remove the function entirely. Signed-off-by: Maxime Ripard Signed-off-by: Vinod Koul --- include/linux/dmaengine.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index f5cc5d4f1ad5..2bff9abc162a 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -1090,7 +1090,6 @@ void dma_async_device_unregister(struct dma_device *device); void dma_run_dependencies(struct dma_async_tx_descriptor *tx); struct dma_chan *dma_get_slave_channel(struct dma_chan *chan); struct dma_chan *dma_get_any_slave_channel(struct dma_device *device); -struct dma_chan *net_dma_find_channel(void); #define dma_request_channel(mask, x, y) __dma_request_channel(&(mask), x, y) #define dma_request_slave_channel_compat(mask, x, y, dev, name) \ __dma_request_slave_channel_compat(&(mask), x, y, dev, name) -- cgit v1.2.3 From f33c9d655893d8632460696bbbdee737cb315711 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 24 Feb 2015 02:06:43 +0000 Subject: mmc: tmio: mmc: tmio: tmio_mmc_data has .chan_priv_?x dma_request_slave_channel_compat() in tmio_mmc_dma needs .chan_priv_tx/.chan_priv_rx. But these are copied from sh_mobile_sdhi only, and sh_mobile_sdhi_info is now almost same as tmio_mmc_data except .chan_priv_?x. sh_mobile_sdhi_info can be replaced to tmio_mmc_data, but it is used from ${LINUX}/arch/arm/mach-shmobile, ${LINUX}/arch/sh. So, this patch adds .chan_priv_?x into tmio_mmc_data as 1st step, and sh_mobile_sdhi driver has dummy operation for now. It will be replaced/removed together with platform data replace. Signed-off-by: Kuninori Morimoto Acked-by: Arnd Bergmann Acked-by: Ulf Hansson Acked-by: Lee Jones Signed-off-by: Vinod Koul --- include/linux/mfd/tmio.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index 605812820e48..24b86d538e88 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -111,6 +111,8 @@ struct dma_chan; * data for the MMC controller */ struct tmio_mmc_data { + void *chan_priv_tx; + void *chan_priv_rx; unsigned int hclk; unsigned long capabilities; unsigned long capabilities2; -- cgit v1.2.3 From 84f11d5b1f2abc0e22895b7e12e037f0ec03caeb Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 24 Feb 2015 02:07:07 +0000 Subject: mmc: sh_mobile_sdhi: remove sh_mobile_sdhi_info Current sh_mobile_sdhi's platform data is set via sh_mobile_sdhi_info and it is just copied to tmio_mmc_data. Now, tmio mmc platform data is specified via tmio_mmc_data. This patch replace sh_mobile_sdhi_info to tmio_mmc_data struct sh_mobile_sdhi_info { -> struct tmio_mmc_data { int dma_slave_tx; -> void *chan_priv_tx; int dma_slave_rx; -> void *chan_priv_rx; unsigned long tmio_flags; -> unsigned long flags; unsigned long tmio_caps; -> unsigned long capabilities; unsigned long tmio_caps2; -> unsigned long capabilities2; u32 tmio_ocr_mask; -> u32 ocr_mask; unsigned int cd_gpio; -> unsigned int cd_gpio; }; unsigned int hclk; void (*set_pwr)(...); void (*set_clk_div)(...); }; Signed-off-by: Kuninori Morimoto Acked-by: Arnd Bergmann Acked-by: Ulf Hansson Signed-off-by: Vinod Koul --- include/linux/mmc/sh_mobile_sdhi.h | 10 ---------- 1 file changed, 10 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mmc/sh_mobile_sdhi.h b/include/linux/mmc/sh_mobile_sdhi.h index da77e5e2041d..95d6f0314a7d 100644 --- a/include/linux/mmc/sh_mobile_sdhi.h +++ b/include/linux/mmc/sh_mobile_sdhi.h @@ -7,14 +7,4 @@ #define SH_MOBILE_SDHI_IRQ_SDCARD "sdcard" #define SH_MOBILE_SDHI_IRQ_SDIO "sdio" -struct sh_mobile_sdhi_info { - int dma_slave_tx; - int dma_slave_rx; - unsigned long tmio_flags; - unsigned long tmio_caps; - unsigned long tmio_caps2; - u32 tmio_ocr_mask; /* available MMC voltages */ - unsigned int cd_gpio; -}; - #endif /* LINUX_MMC_SH_MOBILE_SDHI_H */ -- cgit v1.2.3 From 2e67690137f3a7bac660edd548f8846709c55381 Mon Sep 17 00:00:00 2001 From: Robert ABEL Date: Fri, 27 Feb 2015 16:56:53 +0100 Subject: ARM OMAP2+ GPMC: calculate GPMCFCLKDIVIDER based on WAITMONITORINGTIME The WAITMONITORINGTIME is expressed as a number of GPMC_CLK clock cycles, even though the access is defined as asynchronous, and no GPMC_CLK clock is provided to the external device. Still, GPMCFCLKDIVIDER is used as a divider for the GPMC clock, so it must be programmed to define the correct WAITMONITORINGTIME delay. Calculate GPMCFCLKDIVIDER independent of gpmc,sync-clk-ps in DT for pure asynchronous accesses, i.e. both read and write asynchronous. Signed-off-by: Robert ABEL Acked-by: Tony Lindgren Signed-off-by: Roger Quadros --- include/linux/omap-gpmc.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/omap-gpmc.h b/include/linux/omap-gpmc.h index c2080eebbb47..7dee00143afd 100644 --- a/include/linux/omap-gpmc.h +++ b/include/linux/omap-gpmc.h @@ -163,7 +163,8 @@ extern unsigned int gpmc_ticks_to_ns(unsigned int ticks); extern void gpmc_cs_write_reg(int cs, int idx, u32 val); extern int gpmc_calc_divider(unsigned int sync_clk); -extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t); +extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t, + const struct gpmc_settings *s); extern int gpmc_cs_program_settings(int cs, struct gpmc_settings *p); extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base); extern void gpmc_cs_free(int cs); -- cgit v1.2.3 From 2b49e0c56741fca538176f66ed3c8d16ce4fccd8 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 23 Feb 2015 16:24:42 +0200 Subject: dmaengine: append hsu DMA driver The HSU DMA is developed to support High Speed UART controllers found in particular on Intel MID platforms such as Intel Medfield. The existing implementation is tighten to the drivers/tty/serial/mfd.c driver and has a lot of disadvantages. Besides that we would like to get rid of the old HS UART driver in regarding to extending the 8250 which supports generic DMAEngine API. That's why the current driver has been developed. Signed-off-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman --- include/linux/dma/hsu.h | 48 +++++++++++++++++++++++++++++++++++ include/linux/platform_data/dma-hsu.h | 25 ++++++++++++++++++ 2 files changed, 73 insertions(+) create mode 100644 include/linux/dma/hsu.h create mode 100644 include/linux/platform_data/dma-hsu.h (limited to 'include/linux') diff --git a/include/linux/dma/hsu.h b/include/linux/dma/hsu.h new file mode 100644 index 000000000000..234393a6997b --- /dev/null +++ b/include/linux/dma/hsu.h @@ -0,0 +1,48 @@ +/* + * Driver for the High Speed UART DMA + * + * Copyright (C) 2015 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _DMA_HSU_H +#define _DMA_HSU_H + +#include +#include + +#include + +struct hsu_dma; + +/** + * struct hsu_dma_chip - representation of HSU DMA hardware + * @dev: struct device of the DMA controller + * @irq: irq line + * @regs: memory mapped I/O space + * @length: I/O space length + * @offset: offset of the I/O space where registers are located + * @hsu: struct hsu_dma that is filed by ->probe() + * @pdata: platform data for the DMA controller if provided + */ +struct hsu_dma_chip { + struct device *dev; + int irq; + void __iomem *regs; + unsigned int length; + unsigned int offset; + struct hsu_dma *hsu; + struct hsu_dma_platform_data *pdata; +}; + +/* Export to the internal users */ +irqreturn_t hsu_dma_irq(struct hsu_dma_chip *chip, unsigned short nr); + +/* Export to the platform drivers */ +int hsu_dma_probe(struct hsu_dma_chip *chip); +int hsu_dma_remove(struct hsu_dma_chip *chip); + +#endif /* _DMA_HSU_H */ diff --git a/include/linux/platform_data/dma-hsu.h b/include/linux/platform_data/dma-hsu.h new file mode 100644 index 000000000000..8a1f6a4920b2 --- /dev/null +++ b/include/linux/platform_data/dma-hsu.h @@ -0,0 +1,25 @@ +/* + * Driver for the High Speed UART DMA + * + * Copyright (C) 2015 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _PLATFORM_DATA_DMA_HSU_H +#define _PLATFORM_DATA_DMA_HSU_H + +#include + +struct hsu_dma_slave { + struct device *dma_dev; + int chan_id; +}; + +struct hsu_dma_platform_data { + unsigned short nr_channels; +}; + +#endif /* _PLATFORM_DATA_DMA_HSU_H */ -- cgit v1.2.3 From 1bd187de536494a27925902b9653e9ef0ace4774 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 23 Feb 2015 16:24:44 +0200 Subject: x86, intel-mid: remove Intel MID specific serial support Since we have a native 8250 driver carrying the Intel MID serial devices the specific support is not needed anymore. This patch removes it for Intel MID. Note that the console device name is changed from ttyMFDx to ttySx. Signed-off-by: Andy Shevchenko Acked-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman --- include/linux/serial_mfd.h | 47 ---------------------------------------------- 1 file changed, 47 deletions(-) delete mode 100644 include/linux/serial_mfd.h (limited to 'include/linux') diff --git a/include/linux/serial_mfd.h b/include/linux/serial_mfd.h deleted file mode 100644 index 2b071e0b034d..000000000000 --- a/include/linux/serial_mfd.h +++ /dev/null @@ -1,47 +0,0 @@ -#ifndef _SERIAL_MFD_H_ -#define _SERIAL_MFD_H_ - -/* HW register offset definition */ -#define UART_FOR 0x08 -#define UART_PS 0x0C -#define UART_MUL 0x0D -#define UART_DIV 0x0E - -#define HSU_GBL_IEN 0x0 -#define HSU_GBL_IST 0x4 - -#define HSU_GBL_INT_BIT_PORT0 0x0 -#define HSU_GBL_INT_BIT_PORT1 0x1 -#define HSU_GBL_INT_BIT_PORT2 0x2 -#define HSU_GBL_INT_BIT_IRI 0x3 -#define HSU_GBL_INT_BIT_HDLC 0x4 -#define HSU_GBL_INT_BIT_DMA 0x5 - -#define HSU_GBL_ISR 0x8 -#define HSU_GBL_DMASR 0x400 -#define HSU_GBL_DMAISR 0x404 - -#define HSU_PORT_REG_OFFSET 0x80 -#define HSU_PORT0_REG_OFFSET 0x80 -#define HSU_PORT1_REG_OFFSET 0x100 -#define HSU_PORT2_REG_OFFSET 0x180 -#define HSU_PORT_REG_LENGTH 0x80 - -#define HSU_DMA_CHANS_REG_OFFSET 0x500 -#define HSU_DMA_CHANS_REG_LENGTH 0x40 - -#define HSU_CH_SR 0x0 /* channel status reg */ -#define HSU_CH_CR 0x4 /* control reg */ -#define HSU_CH_DCR 0x8 /* descriptor control reg */ -#define HSU_CH_BSR 0x10 /* max fifo buffer size reg */ -#define HSU_CH_MOTSR 0x14 /* minimum ocp transfer size */ -#define HSU_CH_D0SAR 0x20 /* desc 0 start addr */ -#define HSU_CH_D0TSR 0x24 /* desc 0 transfer size */ -#define HSU_CH_D1SAR 0x28 -#define HSU_CH_D1TSR 0x2C -#define HSU_CH_D2SAR 0x30 -#define HSU_CH_D2TSR 0x34 -#define HSU_CH_D3SAR 0x38 -#define HSU_CH_D3TSR 0x3C - -#endif -- cgit v1.2.3 From afe9cbb1a6adf6da5fa6d4747d102b95b4bb52c1 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Tue, 24 Feb 2015 11:17:10 +0100 Subject: serial: imx: drop support for IRDA MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Support for IRDA was added in 2009 in commit v2.6.31-rc1~399^2~2. There are no in-tree users. Signed-off-by: Uwe Kleine-König Signed-off-by: Greg Kroah-Hartman --- include/linux/platform_data/serial-imx.h | 5 ----- 1 file changed, 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/platform_data/serial-imx.h b/include/linux/platform_data/serial-imx.h index 3cc2e3c40914..a938eba2f18e 100644 --- a/include/linux/platform_data/serial-imx.h +++ b/include/linux/platform_data/serial-imx.h @@ -20,14 +20,9 @@ #define ASMARM_ARCH_UART_H #define IMXUART_HAVE_RTSCTS (1<<0) -#define IMXUART_IRDA (1<<1) struct imxuart_platform_data { unsigned int flags; - void (*irda_enable)(int enable); - unsigned int irda_inv_rx:1; - unsigned int irda_inv_tx:1; - unsigned short transceiver_delay; }; #endif -- cgit v1.2.3 From 73abaf87f01be6fa6da3c0aa9c138a1b6b281068 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sun, 1 Mar 2015 11:05:46 -0500 Subject: serial: earlycon: Refactor parse_options into serial core Prepare to support console-defined matching; refactor the command line parameter string processing from parse_options() into a new core function, uart_parse_earlycon(), which decodes command line parameters of the form: earlycon=,io|mmio|mmio32,, console=,io|mmio|mmio32,, earlycon=,0x, console=,0x, Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- include/linux/serial_core.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index baf3e1d08416..cc5c506f07dd 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -354,6 +354,8 @@ early_param("earlycon", name ## _setup_earlycon); struct uart_port *uart_get_console(struct uart_port *ports, int nr, struct console *c); +int uart_parse_earlycon(char *p, unsigned char *iotype, unsigned long *addr, + char **options); void uart_parse_options(char *options, int *baud, int *parity, int *bits, int *flow); int uart_set_options(struct uart_port *port, struct console *co, int baud, -- cgit v1.2.3 From 916f743da3546c28a2f350d197e3bea95d97ba15 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 26 Feb 2015 15:49:09 -0600 Subject: firmware: qcom: scm: Move the scm driver to drivers/firmware Architectural changes in the ARM Linux kernel tree mandate the eventual removal of the mach-* directories. Move the scm driver to drivers/firmware and the scm header to include/linux to support that removal. Signed-off-by: Kumar Gala --- include/linux/qcom_scm.h | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 include/linux/qcom_scm.h (limited to 'include/linux') diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h new file mode 100644 index 000000000000..6bb84cffb396 --- /dev/null +++ b/include/linux/qcom_scm.h @@ -0,0 +1,29 @@ +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef __QCOM_SCM_H +#define __QCOM_SCM_H + +#define QCOM_SCM_FLAG_COLDBOOT_CPU1 0x01 +#define QCOM_SCM_FLAG_COLDBOOT_CPU2 0x08 +#define QCOM_SCM_FLAG_COLDBOOT_CPU3 0x20 +#define QCOM_SCM_FLAG_WARMBOOT_CPU0 0x04 +#define QCOM_SCM_FLAG_WARMBOOT_CPU1 0x02 +#define QCOM_SCM_FLAG_WARMBOOT_CPU2 0x10 +#define QCOM_SCM_FLAG_WARMBOOT_CPU3 0x40 + +extern int qcom_scm_set_boot_addr(u32 addr, int flags); + +#define QCOM_SCM_VERSION(major, minor) (((major) << 16) | ((minor) & 0xFF)) + +extern u32 qcom_scm_get_version(void); + +#endif -- cgit v1.2.3 From a353e4a06f24235138d483a2625726a5fc472949 Mon Sep 17 00:00:00 2001 From: Lina Iyer Date: Mon, 2 Mar 2015 16:30:28 -0700 Subject: firmware: qcom: scm: Clean cold boot entry to export only the API We dont need to export the SCM specific cold boot flags to the platform code. Export only a function to set the cold boot address. Signed-off-by: Lina Iyer Signed-off-by: Kumar Gala --- include/linux/qcom_scm.h | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h index 6bb84cffb396..68a1d8801c6f 100644 --- a/include/linux/qcom_scm.h +++ b/include/linux/qcom_scm.h @@ -12,15 +12,12 @@ #ifndef __QCOM_SCM_H #define __QCOM_SCM_H -#define QCOM_SCM_FLAG_COLDBOOT_CPU1 0x01 -#define QCOM_SCM_FLAG_COLDBOOT_CPU2 0x08 -#define QCOM_SCM_FLAG_COLDBOOT_CPU3 0x20 #define QCOM_SCM_FLAG_WARMBOOT_CPU0 0x04 #define QCOM_SCM_FLAG_WARMBOOT_CPU1 0x02 #define QCOM_SCM_FLAG_WARMBOOT_CPU2 0x10 #define QCOM_SCM_FLAG_WARMBOOT_CPU3 0x40 -extern int qcom_scm_set_boot_addr(u32 addr, int flags); +extern int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus); #define QCOM_SCM_VERSION(major, minor) (((major) << 16) | ((minor) & 0xFF)) -- cgit v1.2.3 From 2ce76a6ad32fa076a2bb5561e859c97fceec8bb1 Mon Sep 17 00:00:00 2001 From: Lina Iyer Date: Mon, 2 Mar 2015 16:30:29 -0700 Subject: firmware: qcom: scm: Add qcom_scm_set_warm_boot_addr function A core can be powered down for cpuidle or when it is hotplugged off. In either case, the warmboot return address would be different. Allow setting the warmboot address for a specific cpu, optimize and write to the firmware, if the address is different than the previously set address. Export qcom_scm_set_warm_boot_addr function move the warm boot flags to implementation. Signed-off-by: Lina Iyer Signed-off-by: Kumar Gala --- include/linux/qcom_scm.h | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h index 68a1d8801c6f..95ef72a47b0f 100644 --- a/include/linux/qcom_scm.h +++ b/include/linux/qcom_scm.h @@ -1,4 +1,5 @@ /* Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * Copyright (C) 2015 Linaro Ltd. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and @@ -12,12 +13,8 @@ #ifndef __QCOM_SCM_H #define __QCOM_SCM_H -#define QCOM_SCM_FLAG_WARMBOOT_CPU0 0x04 -#define QCOM_SCM_FLAG_WARMBOOT_CPU1 0x02 -#define QCOM_SCM_FLAG_WARMBOOT_CPU2 0x10 -#define QCOM_SCM_FLAG_WARMBOOT_CPU3 0x40 - extern int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus); +extern int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus); #define QCOM_SCM_VERSION(major, minor) (((major) << 16) | ((minor) & 0xFF)) -- cgit v1.2.3 From 767b0235dd476596c0d4154839ae6880bec71b3c Mon Sep 17 00:00:00 2001 From: Lina Iyer Date: Mon, 2 Mar 2015 16:30:30 -0700 Subject: firmware: qcom: scm: Support cpu power down through SCM Support powering down the calling cpu, by trapping into SCM. This termination function triggers the ARM cpu to execute WFI instruction, causing the power controller to safely power the cpu down. Caches may be flushed before powering down the cpu. If cache controller is set to turn off when the cpu is powered down, then the flags argument indicates to the secure mode to flush its cache lines before executing WFI.The warm boot reset address for the cpu should be set before the calling into this function for the cpu to resume. The original code for the qcom_scm_call_atomic1() comes from a patch by Stephen Boyd [1]. The function scm_call_atomic1() has been cherry picked and renamed to match the convention used in this file. Since there are no users of scm_call_atomic2(), the function is not included. [1]. https://lkml.org/lkml/2014/8/4/765 Signed-off-by: Stephen Boyd Signed-off-by: Lina Iyer Signed-off-by: Kumar Gala --- include/linux/qcom_scm.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h index 95ef72a47b0f..d7a974d5f57c 100644 --- a/include/linux/qcom_scm.h +++ b/include/linux/qcom_scm.h @@ -1,4 +1,4 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. +/* Copyright (c) 2010-2014, The Linux Foundation. All rights reserved. * Copyright (C) 2015 Linaro Ltd. * * This program is free software; you can redistribute it and/or modify @@ -16,6 +16,11 @@ extern int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus); extern int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus); +#define QCOM_SCM_CPU_PWR_DOWN_L2_ON 0x0 +#define QCOM_SCM_CPU_PWR_DOWN_L2_OFF 0x1 + +extern void qcom_scm_cpu_power_down(u32 flags); + #define QCOM_SCM_VERSION(major, minor) (((major) << 16) | ((minor) & 0xFF)) extern u32 qcom_scm_get_version(void); -- cgit v1.2.3 From d09957fbb4d0b059b3176b510540df69048ad170 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 10 Mar 2015 17:48:37 +0100 Subject: mtd: cfi: reduce stack size The cfi_staa_write_buffers function uses a large amount of kernel stack whenever CONFIG_MTD_MAP_BANK_WIDTH_32 is set, and that results in a warning on ARM allmodconfig builds: drivers/mtd/chips/cfi_cmdset_0020.c: In function 'cfi_staa_write_buffers': drivers/mtd/chips/cfi_cmdset_0020.c:651:1: warning: the frame size of 1208 bytes is larger than 1024 bytes [-Wframe-larger-than=] It turns out that this is largely a result of a suboptimal implementation of map_word_andequal(). Replacing this function with a straightforward one reduces the stack size in this function by exactly 200 bytes, shrinks the .text segment for this file from 27648 bytes to 26608 bytes, and makes the warning go away. Signed-off-by: Arnd Bergmann Signed-off-by: Brian Norris --- include/linux/mtd/map.h | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mtd/map.h b/include/linux/mtd/map.h index 5f487d776411..a872157a0700 100644 --- a/include/linux/mtd/map.h +++ b/include/linux/mtd/map.h @@ -314,7 +314,17 @@ static inline map_word map_word_or(struct map_info *map, map_word val1, map_word return r; } -#define map_word_andequal(m, a, b, z) map_word_equal(m, z, map_word_and(m, a, b)) +static inline int map_word_andequal(struct map_info *map, map_word val1, map_word val2, map_word val3) +{ + int i; + + for (i = 0; i < map_words(map); i++) { + if ((val1.x[i] & val2.x[i]) != val3.x[i]) + return 0; + } + + return 1; +} static inline int map_word_bitsset(struct map_info *map, map_word val1, map_word val2) { -- cgit v1.2.3 From 7234bea69de200e2060d099685c4c674b556edc0 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 10 Mar 2015 17:51:55 +0100 Subject: mtd: clean up whitespace in linux/mtd/map.h As the only comments I got for the "mtd: cfi: reduce stack size" patch were about whitespace changes, it appears necessary to fix up the rest of the file as well, which contains the exact same mistakes. Signed-off-by: Arnd Bergmann Signed-off-by: Brian Norris --- include/linux/mtd/map.h | 42 ++++++++++++++++++++++++------------------ 1 file changed, 24 insertions(+), 18 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mtd/map.h b/include/linux/mtd/map.h index a872157a0700..29975c73a953 100644 --- a/include/linux/mtd/map.h +++ b/include/linux/mtd/map.h @@ -77,7 +77,7 @@ /* ensure we never evaluate anything shorted than an unsigned long * to zero, and ensure we'll never miss the end of an comparison (bjd) */ -#define map_calc_words(map) ((map_bankwidth(map) + (sizeof(unsigned long)-1))/ sizeof(unsigned long)) +#define map_calc_words(map) ((map_bankwidth(map) + (sizeof(unsigned long)-1)) / sizeof(unsigned long)) #ifdef CONFIG_MTD_MAP_BANK_WIDTH_8 # ifdef map_bankwidth @@ -181,7 +181,7 @@ static inline int map_bankwidth_supported(int w) } } -#define MAX_MAP_LONGS ( ((MAX_MAP_BANKWIDTH*8) + BITS_PER_LONG - 1) / BITS_PER_LONG ) +#define MAX_MAP_LONGS (((MAX_MAP_BANKWIDTH * 8) + BITS_PER_LONG - 1) / BITS_PER_LONG) typedef union { unsigned long x[MAX_MAP_LONGS]; @@ -264,20 +264,22 @@ void unregister_mtd_chip_driver(struct mtd_chip_driver *); struct mtd_info *do_map_probe(const char *name, struct map_info *map); void map_destroy(struct mtd_info *mtd); -#define ENABLE_VPP(map) do { if(map->set_vpp) map->set_vpp(map, 1); } while(0) -#define DISABLE_VPP(map) do { if(map->set_vpp) map->set_vpp(map, 0); } while(0) +#define ENABLE_VPP(map) do { if (map->set_vpp) map->set_vpp(map, 1); } while (0) +#define DISABLE_VPP(map) do { if (map->set_vpp) map->set_vpp(map, 0); } while (0) #define INVALIDATE_CACHED_RANGE(map, from, size) \ - do { if(map->inval_cache) map->inval_cache(map, from, size); } while(0) + do { if (map->inval_cache) map->inval_cache(map, from, size); } while (0) static inline int map_word_equal(struct map_info *map, map_word val1, map_word val2) { int i; - for (i=0; ivirt + ofs); #endif else if (map_bankwidth_is_large(map)) - memcpy_fromio(r.x, map->virt+ofs, map->bankwidth); + memcpy_fromio(r.x, map->virt + ofs, map->bankwidth); else BUG(); -- cgit v1.2.3 From 1aa15f4e00c9be2c7e4c3bd36886ed65d25cc075 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Thu, 12 Mar 2015 13:07:26 +0100 Subject: mfd: syscon: Add atmel system timer registers definition AT91RM920 has a memory range reserved for timer and watchdog configuration. Expose those registers so that drivers can make use of the system timer syscon declared in at91 DTs. Signed-off-by: Alexandre Belloni Acked-by: Lee Jones Signed-off-by: Nicolas Ferre --- include/linux/mfd/syscon/atmel-st.h | 49 +++++++++++++++++++++++++++++++++++++ 1 file changed, 49 insertions(+) create mode 100644 include/linux/mfd/syscon/atmel-st.h (limited to 'include/linux') diff --git a/include/linux/mfd/syscon/atmel-st.h b/include/linux/mfd/syscon/atmel-st.h new file mode 100644 index 000000000000..8acf1ec1fa32 --- /dev/null +++ b/include/linux/mfd/syscon/atmel-st.h @@ -0,0 +1,49 @@ +/* + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * System Timer (ST) - System peripherals registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _LINUX_MFD_SYSCON_ATMEL_ST_H +#define _LINUX_MFD_SYSCON_ATMEL_ST_H + +#include + +#define AT91_ST_CR 0x00 /* Control Register */ +#define AT91_ST_WDRST BIT(0) /* Watchdog Timer Restart */ + +#define AT91_ST_PIMR 0x04 /* Period Interval Mode Register */ +#define AT91_ST_PIV 0xffff /* Period Interval Value */ + +#define AT91_ST_WDMR 0x08 /* Watchdog Mode Register */ +#define AT91_ST_WDV 0xffff /* Watchdog Counter Value */ +#define AT91_ST_RSTEN BIT(16) /* Reset Enable */ +#define AT91_ST_EXTEN BIT(17) /* External Signal Assertion Enable */ + +#define AT91_ST_RTMR 0x0c /* Real-time Mode Register */ +#define AT91_ST_RTPRES 0xffff /* Real-time Prescalar Value */ + +#define AT91_ST_SR 0x10 /* Status Register */ +#define AT91_ST_PITS BIT(0) /* Period Interval Timer Status */ +#define AT91_ST_WDOVF BIT(1) /* Watchdog Overflow */ +#define AT91_ST_RTTINC BIT(2) /* Real-time Timer Increment */ +#define AT91_ST_ALMS BIT(3) /* Alarm Status */ + +#define AT91_ST_IER 0x14 /* Interrupt Enable Register */ +#define AT91_ST_IDR 0x18 /* Interrupt Disable Register */ +#define AT91_ST_IMR 0x1c /* Interrupt Mask Register */ + +#define AT91_ST_RTAR 0x20 /* Real-time Alarm Register */ +#define AT91_ST_ALMV 0xfffff /* Alarm Value */ + +#define AT91_ST_CRTR 0x24 /* Current Real-time Register */ +#define AT91_ST_CRTV 0xfffff /* Current Real-Time Value */ + +#endif /* _LINUX_MFD_SYSCON_ATMEL_ST_H */ -- cgit v1.2.3 From 3b62286d0ef785815994e2558e8cfb686597b0cd Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Mon, 16 Mar 2015 09:37:24 +0200 Subject: dmaengine: Remove FSF mailing addresses Free Software Foundation mailing address has been moved in the past and some of the addresses here are outdated. Remove them from file headers since the COPYING file in the kernel sources includes it. Signed-off-by: Jarkko Nikula Signed-off-by: Vinod Koul --- include/linux/dmaengine.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 2bff9abc162a..ad419757241f 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -11,10 +11,6 @@ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * * The full GNU General Public License is included in this distribution in the * file called COPYING. */ -- cgit v1.2.3 From 34644524bce91883d5051a7eaf3ec5464ed149bf Mon Sep 17 00:00:00 2001 From: Abhilash Kesavan Date: Fri, 6 Feb 2015 19:15:27 +0530 Subject: lib: devres: add a helper function for ioremap_wc Implement a resource managed writecombine ioremap function. Signed-off-by: Abhilash Kesavan Acked-by: Catalin Marinas Signed-off-by: Greg Kroah-Hartman --- include/linux/io.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/io.h b/include/linux/io.h index fa02e55e5a2e..42b33f03d1df 100644 --- a/include/linux/io.h +++ b/include/linux/io.h @@ -64,6 +64,8 @@ void __iomem *devm_ioremap(struct device *dev, resource_size_t offset, resource_size_t size); void __iomem *devm_ioremap_nocache(struct device *dev, resource_size_t offset, resource_size_t size); +void __iomem *devm_ioremap_wc(struct device *dev, resource_size_t offset, + resource_size_t size); void devm_iounmap(struct device *dev, void __iomem *addr); int check_signature(const volatile void __iomem *io_addr, const unsigned char *signature, int length); -- cgit v1.2.3 From 937abe88aea3161cd3a563e577fc9cf4522c7aad Mon Sep 17 00:00:00 2001 From: Kedareswara rao Appana Date: Mon, 2 Mar 2015 23:24:24 +0530 Subject: dmaengine: xilinx-dma: move header file to common location This patch moves the xilinx_dma.h header file to the include/linux/dma. Signed-off-by: Kedareswara rao Appana Signed-off-by: Vinod Koul --- include/linux/amba/xilinx_dma.h | 47 ----------------------------------------- include/linux/dma/xilinx_dma.h | 47 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 47 insertions(+), 47 deletions(-) delete mode 100644 include/linux/amba/xilinx_dma.h create mode 100644 include/linux/dma/xilinx_dma.h (limited to 'include/linux') diff --git a/include/linux/amba/xilinx_dma.h b/include/linux/amba/xilinx_dma.h deleted file mode 100644 index 34b98f276ed0..000000000000 --- a/include/linux/amba/xilinx_dma.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * Xilinx DMA Engine drivers support header file - * - * Copyright (C) 2010-2014 Xilinx, Inc. All rights reserved. - * - * This is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef __DMA_XILINX_DMA_H -#define __DMA_XILINX_DMA_H - -#include -#include - -/** - * struct xilinx_vdma_config - VDMA Configuration structure - * @frm_dly: Frame delay - * @gen_lock: Whether in gen-lock mode - * @master: Master that it syncs to - * @frm_cnt_en: Enable frame count enable - * @park: Whether wants to park - * @park_frm: Frame to park on - * @coalesc: Interrupt coalescing threshold - * @delay: Delay counter - * @reset: Reset Channel - * @ext_fsync: External Frame Sync source - */ -struct xilinx_vdma_config { - int frm_dly; - int gen_lock; - int master; - int frm_cnt_en; - int park; - int park_frm; - int coalesc; - int delay; - int reset; - int ext_fsync; -}; - -int xilinx_vdma_channel_set_config(struct dma_chan *dchan, - struct xilinx_vdma_config *cfg); - -#endif diff --git a/include/linux/dma/xilinx_dma.h b/include/linux/dma/xilinx_dma.h new file mode 100644 index 000000000000..34b98f276ed0 --- /dev/null +++ b/include/linux/dma/xilinx_dma.h @@ -0,0 +1,47 @@ +/* + * Xilinx DMA Engine drivers support header file + * + * Copyright (C) 2010-2014 Xilinx, Inc. All rights reserved. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __DMA_XILINX_DMA_H +#define __DMA_XILINX_DMA_H + +#include +#include + +/** + * struct xilinx_vdma_config - VDMA Configuration structure + * @frm_dly: Frame delay + * @gen_lock: Whether in gen-lock mode + * @master: Master that it syncs to + * @frm_cnt_en: Enable frame count enable + * @park: Whether wants to park + * @park_frm: Frame to park on + * @coalesc: Interrupt coalescing threshold + * @delay: Delay counter + * @reset: Reset Channel + * @ext_fsync: External Frame Sync source + */ +struct xilinx_vdma_config { + int frm_dly; + int gen_lock; + int master; + int frm_cnt_en; + int park; + int park_frm; + int coalesc; + int delay; + int reset; + int ext_fsync; +}; + +int xilinx_vdma_channel_set_config(struct dma_chan *dchan, + struct xilinx_vdma_config *cfg); + +#endif -- cgit v1.2.3 From a572460be9cfb423c60275943f7921003b8cd372 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 11 Mar 2015 12:30:58 -0300 Subject: dmaengine: imx-sdma: Add support for version 3 firmware Currently when version 3.1 of the mx6q SDMA firmware is used we get: [ 0.392169] imx-sdma 20ec000.sdma: unknown firmware version [ 0.399281] imx-sdma 20ec000.sdma: initialized Add support for it. Based on a patch from Shengjiu Wang from the internal FSL kernel. Signed-off-by: Fabio Estevam Signed-off-by: Vinod Koul --- include/linux/platform_data/dma-imx-sdma.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/platform_data/dma-imx-sdma.h b/include/linux/platform_data/dma-imx-sdma.h index eabac4e2fc99..2d08816720f6 100644 --- a/include/linux/platform_data/dma-imx-sdma.h +++ b/include/linux/platform_data/dma-imx-sdma.h @@ -48,6 +48,9 @@ struct sdma_script_start_addrs { s32 ssish_2_mcu_addr; s32 hdmi_dma_addr; /* End of v2 array */ + s32 zcanfd_2_mcu_addr; + s32 zqspi_2_mcu_addr; + /* End of v3 array */ }; /** -- cgit v1.2.3 From 6f921fab5844941f7605b7f1a265f5fc7fe969a7 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Wed, 18 Mar 2015 18:38:25 +0200 Subject: wlcore: set irq_trigger in board files instead of hiding behind a quirk The platform_quirk element in the platform data was used to change the way the IRQ is triggered. When set, the EDGE_IRQ quirk would change the irqflags used and treat edge trigger differently from the rest. Instead of hiding this irq flag setting behind the quirk, have the board files set the irq_trigger explicitly. This will allow us to use standard irq DT definitions later on. Signed-off-by: Luciano Coelho [Eliad - rebase, add irq_trigger field and pass it, update board file changes] Signed-off-by: Eliad Peller Tested-by: Nikita Kiryanov Acked-by: Kalle Valo Acked-by: Sekhar Nori Signed-off-by: Tony Lindgren --- include/linux/wl12xx.h | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/wl12xx.h b/include/linux/wl12xx.h index a9c723be1acf..3876b67dbcbc 100644 --- a/include/linux/wl12xx.h +++ b/include/linux/wl12xx.h @@ -57,15 +57,12 @@ struct wl1251_platform_data { struct wl12xx_platform_data { int irq; + u32 irq_trigger; int board_ref_clock; int board_tcxo_clock; - unsigned long platform_quirks; bool pwr_in_suspend; }; -/* Platform does not support level trigger interrupts */ -#define WL12XX_PLATFORM_QUIRK_EDGE_IRQ BIT(0) - #ifdef CONFIG_WILINK_PLATFORM_DATA int wl12xx_set_platform_data(const struct wl12xx_platform_data *data); -- cgit v1.2.3 From 2f921b5bb0511fb698681d8ef35c48be7a9116bf Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Tue, 24 Mar 2015 11:51:39 +1030 Subject: lguest: suppress interrupts for single insn, not range. The last patch reduced our interrupt-suppression region to one address, so simplify the code somewhat. Also, remove the obsolete undefined instruction ranges and the comment which refers to lguest_guest.S instead of head_32.S. Signed-off-by: Rusty Russell --- include/linux/lguest.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/lguest.h b/include/linux/lguest.h index 9962c6bb1311..6db19f35f7c5 100644 --- a/include/linux/lguest.h +++ b/include/linux/lguest.h @@ -61,8 +61,8 @@ struct lguest_data { u32 tsc_khz; /* Fields initialized by the Guest at boot: */ - /* Instruction range to suppress interrupts even if enabled */ - unsigned long noirq_start, noirq_end; + /* Instruction to suppress interrupts even if enabled */ + unsigned long noirq_iret; /* Address above which page tables are all identical. */ unsigned long kernel_address; /* The vector to try to use for system calls (0x40 or 0x80). */ -- cgit v1.2.3 From 44486b48b066330e0ed0a66478cc49f5975ec6c1 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Wed, 18 Mar 2015 18:38:26 +0200 Subject: wl12xx: use frequency instead of enumerations for pdata clocks Instead of defining an enumeration with the FW specific values for the different clock rates, use the actual frequency instead. Also add a boolean to specify whether the clock is XTAL or not. Change all board files to reflect this. Signed-off-by: Luciano Coelho [Eliad - small fixes, update board file changes] Signed-off-by: Eliad Peller Tested-by: Nikita Kiryanov Acked-by: Kalle Valo Acked-by: Sekhar Nori Signed-off-by: Tony Lindgren --- include/linux/wl12xx.h | 27 +++------------------------ 1 file changed, 3 insertions(+), 24 deletions(-) (limited to 'include/linux') diff --git a/include/linux/wl12xx.h b/include/linux/wl12xx.h index 3876b67dbcbc..eea1e6dac4be 100644 --- a/include/linux/wl12xx.h +++ b/include/linux/wl12xx.h @@ -26,28 +26,6 @@ #include -/* Reference clock values */ -enum { - WL12XX_REFCLOCK_19 = 0, /* 19.2 MHz */ - WL12XX_REFCLOCK_26 = 1, /* 26 MHz */ - WL12XX_REFCLOCK_38 = 2, /* 38.4 MHz */ - WL12XX_REFCLOCK_52 = 3, /* 52 MHz */ - WL12XX_REFCLOCK_38_XTAL = 4, /* 38.4 MHz, XTAL */ - WL12XX_REFCLOCK_26_XTAL = 5, /* 26 MHz, XTAL */ -}; - -/* TCXO clock values */ -enum { - WL12XX_TCXOCLOCK_19_2 = 0, /* 19.2MHz */ - WL12XX_TCXOCLOCK_26 = 1, /* 26 MHz */ - WL12XX_TCXOCLOCK_38_4 = 2, /* 38.4MHz */ - WL12XX_TCXOCLOCK_52 = 3, /* 52 MHz */ - WL12XX_TCXOCLOCK_16_368 = 4, /* 16.368 MHz */ - WL12XX_TCXOCLOCK_32_736 = 5, /* 32.736 MHz */ - WL12XX_TCXOCLOCK_16_8 = 6, /* 16.8 MHz */ - WL12XX_TCXOCLOCK_33_6 = 7, /* 33.6 MHz */ -}; - struct wl1251_platform_data { int power_gpio; /* SDIO only: IRQ number if WLAN_IRQ line is used, 0 for SDIO IRQs */ @@ -58,8 +36,9 @@ struct wl1251_platform_data { struct wl12xx_platform_data { int irq; u32 irq_trigger; - int board_ref_clock; - int board_tcxo_clock; + bool ref_clock_xtal; /* specify whether the clock is XTAL or not */ + u32 ref_clock_freq; /* in Hertz */ + u32 tcxo_clock_freq; /* in Hertz, tcxo is always XTAL */ bool pwr_in_suspend; }; -- cgit v1.2.3 From 83c3a7d4ac7fdc29a64bf9a5467a36b4c72a1eed Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Wed, 18 Mar 2015 18:38:30 +0200 Subject: wlcore: remove wl12xx_platform_data Now that we have wlcore device-tree bindings in place (for both wl12xx and wl18xx), remove the legacy wl12xx_platform_data struct, and move its members into the platform device data (that is passed to wlcore) Davinci 850 is the only platform that still set the platform data in the legacy way (and doesn't have DT bindings), so remove the relevant code/Kconfig option from the board file (as suggested by Sekhar Nori) Since no one currently uses wlcore_spi, simply remove its platform data support (DT bindings will have to be added if someone actually needs it) Signed-off-by: Luciano Coelho Signed-off-by: Eliad Peller Tested-by: Nikita Kiryanov Acked-by: Kalle Valo Acked-by: Sekhar Nori Signed-off-by: Tony Lindgren --- include/linux/wl12xx.h | 25 ------------------------- 1 file changed, 25 deletions(-) (limited to 'include/linux') diff --git a/include/linux/wl12xx.h b/include/linux/wl12xx.h index eea1e6dac4be..95704cd4cfab 100644 --- a/include/linux/wl12xx.h +++ b/include/linux/wl12xx.h @@ -33,39 +33,14 @@ struct wl1251_platform_data { bool use_eeprom; }; -struct wl12xx_platform_data { - int irq; - u32 irq_trigger; - bool ref_clock_xtal; /* specify whether the clock is XTAL or not */ - u32 ref_clock_freq; /* in Hertz */ - u32 tcxo_clock_freq; /* in Hertz, tcxo is always XTAL */ - bool pwr_in_suspend; -}; - #ifdef CONFIG_WILINK_PLATFORM_DATA -int wl12xx_set_platform_data(const struct wl12xx_platform_data *data); - -struct wl12xx_platform_data *wl12xx_get_platform_data(void); - int wl1251_set_platform_data(const struct wl1251_platform_data *data); struct wl1251_platform_data *wl1251_get_platform_data(void); #else -static inline -int wl12xx_set_platform_data(const struct wl12xx_platform_data *data) -{ - return -ENOSYS; -} - -static inline -struct wl12xx_platform_data *wl12xx_get_platform_data(void) -{ - return ERR_PTR(-ENODATA); -} - static inline int wl1251_set_platform_data(const struct wl1251_platform_data *data) { -- cgit v1.2.3 From dd46c787788d5bf5b974729d43e4c405814a4c7d Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Wed, 25 Mar 2015 15:07:05 +1100 Subject: fs: Add support FALLOC_FL_INSERT_RANGE for fallocate FALLOC_FL_INSERT_RANGE command is the opposite command of FALLOC_FL_COLLAPSE_RANGE that is needed for someone who wants to add some data in the middle of file. FALLOC_FL_INSERT_RANGE will create space for writing new data within a file after shifting extents to right as given length. This command also has same limitations as FALLOC_FL_COLLAPSE_RANGE in that operations need to be filesystem block boundary aligned and cannot cross the current EOF. Signed-off-by: Namjae Jeon Signed-off-by: Ashish Sangwan Reviewed-by: Dave Chinner Signed-off-by: Dave Chinner --- include/linux/falloc.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/falloc.h b/include/linux/falloc.h index 31591686ac2d..996111000a8c 100644 --- a/include/linux/falloc.h +++ b/include/linux/falloc.h @@ -21,4 +21,10 @@ struct space_resv { #define FS_IOC_RESVSP _IOW('X', 40, struct space_resv) #define FS_IOC_RESVSP64 _IOW('X', 42, struct space_resv) +#define FALLOC_FL_SUPPORTED_MASK (FALLOC_FL_KEEP_SIZE | \ + FALLOC_FL_PUNCH_HOLE | \ + FALLOC_FL_COLLAPSE_RANGE | \ + FALLOC_FL_ZERO_RANGE | \ + FALLOC_FL_INSERT_RANGE) + #endif /* _FALLOC_H_ */ -- cgit v1.2.3 From 3a3e1c88362429ca3a6ef84d232e56b197294ce0 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Mon, 23 Feb 2015 15:57:32 +0200 Subject: ARM: OMAP2+: PRCM: add support for static clock memmap indices All clock provider related drivers will now register their iomaps with a static index. This makes it easier to split up the individual drivers to their own files in subsequent patches. Signed-off-by: Tero Kristo --- include/linux/clk/ti.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h index 67844003493d..19895a3f48b7 100644 --- a/include/linux/clk/ti.h +++ b/include/linux/clk/ti.h @@ -221,6 +221,7 @@ struct ti_dt_clk { /* Static memmap indices */ enum { TI_CLKM_CM = 0, + TI_CLKM_CM2, TI_CLKM_PRM, TI_CLKM_SCRM, }; -- cgit v1.2.3 From bd735995308b553cc3c7f6a975aa284b270c7e2c Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 2 Feb 2015 15:44:54 +0100 Subject: misc: Add attribute groups Add groups field to struct miscdevice for passing the attribute groups at device creation. In this way, the driver can avoid the manual call of device_create_file() after the device registration, which is basically a racy operation, in addition to the reduction of manual device_remove_file() calls. Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- include/linux/miscdevice.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/miscdevice.h b/include/linux/miscdevice.h index ee80dd7d9f60..819077c32690 100644 --- a/include/linux/miscdevice.h +++ b/include/linux/miscdevice.h @@ -52,6 +52,7 @@ #define MISC_DYNAMIC_MINOR 255 struct device; +struct attribute_group; struct miscdevice { int minor; @@ -60,6 +61,7 @@ struct miscdevice { struct list_head list; struct device *parent; struct device *this_device; + const struct attribute_group **groups; const char *nodename; umode_t mode; }; -- cgit v1.2.3 From 44caf2f37f009b2affa743073fa935826b6ab2fd Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Fri, 13 Feb 2015 14:25:24 +0000 Subject: iommu/vt-d: kill bogus ecap_niotlb_iunits() As far back as I can see (which right now is a draft of the v1.2 spec dating from September 2008), bits 24-31 of the Extended Capability Register have already been reserved. I have no idea why anyone ever thought there would be multiple sets of IOTLB registers, but we've never supported them and all we do is make sure we map enough MMIO space for them. Kill it dead. Those bits do actually have a different meaning now. Signed-off-by: David Woodhouse --- include/linux/intel-iommu.h | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h index a65208a8fe18..ee24ada20428 100644 --- a/include/linux/intel-iommu.h +++ b/include/linux/intel-iommu.h @@ -115,10 +115,8 @@ static inline void dmar_writeq(void __iomem *addr, u64 val) * Extended Capability Register */ -#define ecap_niotlb_iunits(e) ((((e) >> 24) & 0xff) + 1) #define ecap_iotlb_offset(e) ((((e) >> 8) & 0x3ff) * 16) -#define ecap_max_iotlb_offset(e) \ - (ecap_iotlb_offset(e) + ecap_niotlb_iunits(e) * 16) +#define ecap_max_iotlb_offset(e) (ecap_iotlb_offset(e) + 16) #define ecap_coherent(e) ((e) & 0x1) #define ecap_qis(e) ((e) & 0x2) #define ecap_pass_through(e) ((e >> 6) & 0x1) -- cgit v1.2.3 From 4423f5e7d28c26af31df711c5c21eeacfac737b4 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Wed, 25 Mar 2015 15:43:39 +0000 Subject: iommu/vt-d: Add new extended capabilities from v2.3 VT-d specification Signed-off-by: David Woodhouse --- include/linux/intel-iommu.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'include/linux') diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h index ee24ada20428..796ef9645827 100644 --- a/include/linux/intel-iommu.h +++ b/include/linux/intel-iommu.h @@ -115,6 +115,17 @@ static inline void dmar_writeq(void __iomem *addr, u64 val) * Extended Capability Register */ +#define ecap_pss(e) ((e >> 35) & 0x1f) +#define ecap_eafs(e) ((e >> 34) & 0x1) +#define ecap_nwfs(e) ((e >> 33) & 0x1) +#define ecap_srs(e) ((e >> 31) & 0x1) +#define ecap_ers(e) ((e >> 30) & 0x1) +#define ecap_prs(e) ((e >> 29) & 0x1) +#define ecap_pasid(e) ((e >> 28) & 0x1) +#define ecap_dis(e) ((e >> 27) & 0x1) +#define ecap_nest(e) ((e >> 26) & 0x1) +#define ecap_mts(e) ((e >> 25) & 0x1) +#define ecap_ecs(e) ((e >> 24) & 0x1) #define ecap_iotlb_offset(e) ((((e) >> 8) & 0x3ff) * 16) #define ecap_max_iotlb_offset(e) (ecap_iotlb_offset(e) + 16) #define ecap_coherent(e) ((e) & 0x1) @@ -178,6 +189,9 @@ static inline void dmar_writeq(void __iomem *addr, u64 val) #define DMA_GSTS_IRES (((u32)1) << 25) #define DMA_GSTS_CFIS (((u32)1) << 23) +/* DMA_RTADDR_REG */ +#define DMA_RTADDR_RTT (((u64)1) << 11) + /* CCMD_REG */ #define DMA_CCMD_ICC (((u64)1) << 63) #define DMA_CCMD_GLOBAL_INVL (((u64)1) << 61) -- cgit v1.2.3 From 959801fef94b7ee66ea2c713229637a7e1770890 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Tue, 24 Feb 2015 14:25:00 -0500 Subject: serial: core: Add minor field to uart_port UART drivers that share ttyS namespace cannot trivially compute the ttyS index from the port->line value since the minor_start may be offset from minor 64. Further, to do so requires a pointer to the uart driver since there is no back pointer from uart_port to uart_driver. Rather than have UART drivers computing the minor value by themselves, encapsulate within the serial core at port registration time. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- include/linux/serial_core.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index b0148e7bcbfa..980170e5a982 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -235,6 +235,7 @@ struct uart_port { const struct uart_ops *ops; unsigned int custom_divisor; unsigned int line; /* port index */ + unsigned int minor; resource_size_t mapbase; /* for ioremap */ struct device *dev; /* parent device */ unsigned char hub6; /* this should be in the 8250 driver */ -- cgit v1.2.3 From 828aef376d7a129547bc4ebb949965040177e3da Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 24 Mar 2015 14:02:46 +0000 Subject: ACPI / processor: Introduce phys_cpuid_t for CPU hardware ID CPU hardware ID (phys_id) is defined as u32 in structure acpi_processor, but phys_id is used as int in acpi processor driver, so it will lead to some inconsistence for the drivers. Furthermore, to cater for ACPI arch ports that implement 64 bits CPU ids a generic CPU physical id type is required. So introduce typedef u32 phys_cpuid_t in a common file, and introduce a macro PHYS_CPUID_INVALID as (phys_cpuid_t)(-1) if it's not defined by other archs, this will solve the inconsistence in acpi processor driver, and will prepare for the ACPI on ARM64 for the 64 bit CPU hardware ID in the following patch. CC: Rafael J Wysocki Suggested-by: Lorenzo Pieralisi Reviewed-by: Grant Likely Acked-by: Sudeep Holla Acked-by: Lorenzo Pieralisi Acked-by: Rafael J. Wysocki Signed-off-by: Catalin Marinas [hj: reworked cpu physid map return codes] Signed-off-by: Hanjun Guo Signed-off-by: Will Deacon --- include/linux/acpi.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 24c7aa8b1d20..6ec33c595aea 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -146,9 +146,14 @@ void acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa); int acpi_numa_memory_affinity_init (struct acpi_srat_mem_affinity *ma); void acpi_numa_arch_fixup(void); +#ifndef PHYS_CPUID_INVALID +typedef u32 phys_cpuid_t; +#define PHYS_CPUID_INVALID (phys_cpuid_t)(-1) +#endif + #ifdef CONFIG_ACPI_HOTPLUG_CPU /* Arch dependent functions for cpu hotplug support */ -int acpi_map_cpu(acpi_handle handle, int physid, int *pcpu); +int acpi_map_cpu(acpi_handle handle, phys_cpuid_t physid, int *pcpu); int acpi_unmap_cpu(int cpu); #endif /* CONFIG_ACPI_HOTPLUG_CPU */ -- cgit v1.2.3 From fbe61ec71ac975279cd47b6c299d5e33f63aac4e Mon Sep 17 00:00:00 2001 From: Hanjun Guo Date: Tue, 24 Mar 2015 14:02:48 +0000 Subject: ARM64 / ACPI: Introduce ACPI_IRQ_MODEL_GIC and register device's gsi Introduce ACPI_IRQ_MODEL_GIC which is needed for ARM64 as GIC is used, and then register device's gsi with the core IRQ subsystem. acpi_register_gsi() is similar to DT based irq_of_parse_and_map(), since gsi is unique in the system, so use hwirq number directly for the mapping. We are going to implement stacked domains when GICv2m, GICv3, ITS support are added. CC: Marc Zyngier Originally-by: Amit Daniel Kachhap Tested-by: Suravee Suthikulpanit Tested-by: Yijing Wang Tested-by: Mark Langsdorf Tested-by: Jon Masters Tested-by: Timur Tabi Tested-by: Robert Richter Acked-by: Robert Richter Acked-by: Rafael J. Wysocki Reviewed-by: Grant Likely Signed-off-by: Hanjun Guo Signed-off-by: Will Deacon --- include/linux/acpi.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 6ec33c595aea..de4e86f89c83 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -73,6 +73,7 @@ enum acpi_irq_model_id { ACPI_IRQ_MODEL_IOAPIC, ACPI_IRQ_MODEL_IOSAPIC, ACPI_IRQ_MODEL_PLATFORM, + ACPI_IRQ_MODEL_GIC, ACPI_IRQ_MODEL_COUNT }; -- cgit v1.2.3 From d60fc3892c4de4a25658786f941690462c5a5bab Mon Sep 17 00:00:00 2001 From: Tomasz Nowicki Date: Tue, 24 Mar 2015 14:02:49 +0000 Subject: irqchip: Add GICv2 specific ACPI boot support ACPI kernel uses MADT table for proper GIC initialization. It needs to parse GIC related subtables, collect CPU interface and distributor addresses and call driver initialization function (which is hardware abstraction agnostic). In a similar way, FDT initialize GICv1/2. NOTE: This commit allow to initialize GICv1/2 basic functionality. While now simple GICv2 init call is used, any further GIC features require generic infrastructure for proper ACPI irqchip initialization. That mechanism and stacked irqdomains to support GICv2 MSI/virtualization extension, GICv3/4 and its ITS are considered as next steps. CC: Jason Cooper CC: Marc Zyngier CC: Thomas Gleixner Tested-by: Suravee Suthikulpanit Tested-by: Yijing Wang Tested-by: Mark Langsdorf Tested-by: Jon Masters Tested-by: Timur Tabi Tested-by: Robert Richter Acked-by: Robert Richter Acked-by: Marc Zyngier Acked-by: Jason Cooper Reviewed-by: Grant Likely Signed-off-by: Tomasz Nowicki Signed-off-by: Hanjun Guo Signed-off-by: Will Deacon --- include/linux/acpi_irq.h | 10 ++++++++++ include/linux/irqchip/arm-gic-acpi.h | 31 +++++++++++++++++++++++++++++++ 2 files changed, 41 insertions(+) create mode 100644 include/linux/acpi_irq.h create mode 100644 include/linux/irqchip/arm-gic-acpi.h (limited to 'include/linux') diff --git a/include/linux/acpi_irq.h b/include/linux/acpi_irq.h new file mode 100644 index 000000000000..f10c87265855 --- /dev/null +++ b/include/linux/acpi_irq.h @@ -0,0 +1,10 @@ +#ifndef _LINUX_ACPI_IRQ_H +#define _LINUX_ACPI_IRQ_H + +#include + +#ifndef acpi_irq_init +static inline void acpi_irq_init(void) { } +#endif + +#endif /* _LINUX_ACPI_IRQ_H */ diff --git a/include/linux/irqchip/arm-gic-acpi.h b/include/linux/irqchip/arm-gic-acpi.h new file mode 100644 index 000000000000..de3419ed3937 --- /dev/null +++ b/include/linux/irqchip/arm-gic-acpi.h @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2014, Linaro Ltd. + * Author: Tomasz Nowicki + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef ARM_GIC_ACPI_H_ +#define ARM_GIC_ACPI_H_ + +#ifdef CONFIG_ACPI + +/* + * Hard code here, we can not get memory size from MADT (but FDT does), + * Actually no need to do that, because this size can be inferred + * from GIC spec. + */ +#define ACPI_GICV2_DIST_MEM_SIZE (SZ_4K) +#define ACPI_GIC_CPU_IF_MEM_SIZE (SZ_8K) + +struct acpi_table_header; + +int gic_v2_acpi_init(struct acpi_table_header *table); +void acpi_gic_init(void); +#else +static inline void acpi_gic_init(void) { } +#endif + +#endif /* ARM_GIC_ACPI_H_ */ -- cgit v1.2.3 From b09ca1ecf6d499d5a33f978c905d2fbcc79b55d9 Mon Sep 17 00:00:00 2001 From: Hanjun Guo Date: Tue, 24 Mar 2015 14:02:50 +0000 Subject: clocksource / arch_timer: Parse GTDT to initialize arch timer Using the information presented by GTDT (Generic Timer Description Table) to initialize the arch timer (not memory-mapped). CC: Daniel Lezcano CC: Thomas Gleixner Originally-by: Amit Daniel Kachhap Tested-by: Suravee Suthikulpanit Tested-by: Yijing Wang Tested-by: Mark Langsdorf Tested-by: Jon Masters Tested-by: Timur Tabi Tested-by: Robert Richter Acked-by: Robert Richter Acked-by: Daniel Lezcano Reviewed-by: Grant Likely Signed-off-by: Hanjun Guo Signed-off-by: Will Deacon --- include/linux/clocksource.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index 9c78d15d33e4..2b2e1f80c519 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -244,4 +244,10 @@ extern void clocksource_of_init(void); static inline void clocksource_of_init(void) {} #endif +#ifdef CONFIG_ACPI +void acpi_generic_timer_init(void); +#else +static inline void acpi_generic_timer_init(void) { } +#endif + #endif /* _LINUX_CLOCKSOURCE_H */ -- cgit v1.2.3 From c7cef0a84912cab3c9df8949b034e4aa62982ec9 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Mon, 9 Mar 2015 16:27:12 -0400 Subject: console: Add extensible console matching Add match() method to struct console which allows the console to perform console command line matching instead of (or in addition to) default console matching (ie., by fixed name and index). The match() method returns 0 to indicate a successful match; normal console matching occurs if no match() method is defined or the match() method returns non-zero. The match() method is expected to set the console index if required. Re-implement earlycon-to-console-handoff with direct matching of "console=uart|uart8250,..." to the 8250 ttyS console. Acked-by: Rob Herring Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- include/linux/console.h | 3 +-- include/linux/serial_8250.h | 2 -- 2 files changed, 1 insertion(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/console.h b/include/linux/console.h index 7571a16bd653..9f50fb413c11 100644 --- a/include/linux/console.h +++ b/include/linux/console.h @@ -123,7 +123,7 @@ struct console { struct tty_driver *(*device)(struct console *, int *); void (*unblank)(void); int (*setup)(struct console *, char *); - int (*early_setup)(void); + int (*match)(struct console *, char *name, int idx, char *options); short flags; short index; int cflag; @@ -141,7 +141,6 @@ extern int console_set_on_cmdline; extern struct console *early_console; extern int add_preferred_console(char *name, int idx, char *options); -extern int update_console_cmdline(char *name, int idx, char *name_new, int idx_new, char *options); extern void register_console(struct console *); extern int unregister_console(struct console *); extern struct console *console_drivers; diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h index a8efa235b7c1..f26ae7fa30ae 100644 --- a/include/linux/serial_8250.h +++ b/include/linux/serial_8250.h @@ -118,8 +118,6 @@ void serial8250_resume_port(int line); extern int early_serial_setup(struct uart_port *port); -extern int serial8250_find_port(struct uart_port *p); -extern int serial8250_find_port_for_earlycon(void); extern unsigned int serial8250_early_in(struct uart_port *port, int offset); extern void serial8250_early_out(struct uart_port *port, int offset, int value); extern int setup_early_serial8250_console(char *cmdline); -- cgit v1.2.3 From 470ca0de69feaba5df215ad804cec1859883a5ed Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Mon, 9 Mar 2015 16:27:21 -0400 Subject: serial: earlycon: Enable earlycon without command line param Earlycon matching can only be triggered if 'earlycon=...' has been specified on the kernel command line. To workaround this limitation requires tight coupling between arches and specific serial drivers in order to start an earlycon. Devicetree avoids this limitation with a link table that contains the required data to match earlycons. Mirror this approach for earlycon match by name. Re-purpose EARLYCON_DECLARE to generate a table entry which associates name with setup() function. Re-purpose setup_earlycon() to scan this table for an earlycon match, which is registered if found. Declare one "earlycon" early_param, which calls setup_earlycon(). This design allows setup_earlycon() to be called directly with a param string (as if 'earlycon=...' had been set on the command line). Re-registration (either directly or by early_param) is prevented. Acked-by: Rob Herring Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- include/linux/serial_core.h | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 980170e5a982..8aeec4913a9c 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -337,18 +337,21 @@ struct earlycon_device { char options[16]; /* e.g., 115200n8 */ unsigned int baud; }; -int setup_earlycon(char *buf, const char *match, - int (*setup)(struct earlycon_device *, const char *)); +struct earlycon_id { + char name[16]; + int (*setup)(struct earlycon_device *, const char *options); +}; + +extern int setup_earlycon(char *buf); extern int of_setup_earlycon(unsigned long addr, int (*setup)(struct earlycon_device *, const char *)); -#define EARLYCON_DECLARE(name, func) \ -static int __init name ## _setup_earlycon(char *buf) \ -{ \ - return setup_earlycon(buf, __stringify(name), func); \ -} \ -early_param("earlycon", name ## _setup_earlycon); +#define EARLYCON_DECLARE(_name, func) \ + static const struct earlycon_id __earlycon_##_name \ + __used __section(__earlycon_table) \ + = { .name = __stringify(_name), \ + .setup = func } #define OF_EARLYCON_DECLARE(name, compat, fn) \ _OF_DECLARE(earlycon, name, compat, fn, void *) -- cgit v1.2.3 From df519e7bd33cf56d8a5ce357dfb94248d427b688 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Mon, 9 Mar 2015 16:27:22 -0400 Subject: serial: 8250_early: Remove setup_early_serial8250_console() setup_earlycon() will now match and register the desired earlycon from the param string (as if 'earlycon=...' had been set on the command line). Use setup_earlycon() from existing arch call sites which start an earlycon directly. Acked-by: Rob Herring Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- include/linux/serial_8250.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h index f26ae7fa30ae..ca9f87beac63 100644 --- a/include/linux/serial_8250.h +++ b/include/linux/serial_8250.h @@ -120,7 +120,6 @@ extern int early_serial_setup(struct uart_port *port); extern unsigned int serial8250_early_in(struct uart_port *port, int offset); extern void serial8250_early_out(struct uart_port *port, int offset, int value); -extern int setup_early_serial8250_console(char *cmdline); extern void serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old); extern int serial8250_do_startup(struct uart_port *port); -- cgit v1.2.3 From a4416cd1ac7b48988f0f41a17769d65c71ffc504 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Tue, 24 Feb 2015 14:25:07 -0500 Subject: serial: 8250: Separate legacy irq handling from core port operations Prepare for 8250 split; decouple irq setup/teardown and handler from core port operations. Introduce setup_irq() and release_irq() 8250 driver methods; the 8250 core will use these methods to install and remove irq handling for the given 8250 port. Refactor irq chain linking/unlinking from 8250 core into univ8250_setup_irq()/univ8250_release_irq() for the universal 8250 driver. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- include/linux/serial_8250.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'include/linux') diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h index ca9f87beac63..50735a9ad598 100644 --- a/include/linux/serial_8250.h +++ b/include/linux/serial_8250.h @@ -60,6 +60,20 @@ enum { }; struct uart_8250_dma; +struct uart_8250_port; + +/** + * 8250 core driver operations + * + * @setup_irq() Setup irq handling. The universal 8250 driver links this + * port to the irq chain. Other drivers may @request_irq(). + * @release_irq() Undo irq handling. The universal 8250 driver unlinks + * the port from the irq chain. + */ +struct uart_8250_ops { + int (*setup_irq)(struct uart_8250_port *); + void (*release_irq)(struct uart_8250_port *); +}; /* * This should be used by drivers which want to register @@ -100,6 +114,7 @@ struct uart_8250_port { unsigned char msr_saved_flags; struct uart_8250_dma *dma; + const struct uart_8250_ops *ops; /* 8250 specific callbacks */ int (*dl_read)(struct uart_8250_port *); -- cgit v1.2.3 From 403753937020549e4bb0d8ef6e915f00a338a096 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Tue, 24 Feb 2015 14:25:14 -0500 Subject: serial: 8250: Decouple RSA probe Prepare for 8250 split; separate RSA probe and resource management from base port operations. Override base port operations for the config_port(), request_port() and release_port() methods to implement the optional RSA probe and resource management only in the universal/legacy 8250 driver. Introduce 'probe' flags for 8250 ports, which allows drivers higher up the driver stack to enable optional probes. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- include/linux/serial_8250.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h index 50735a9ad598..78097e7a330a 100644 --- a/include/linux/serial_8250.h +++ b/include/linux/serial_8250.h @@ -102,6 +102,8 @@ struct uart_8250_port { unsigned char canary; /* non-zero during system sleep * if no_console_suspend */ + unsigned char probe; +#define UART_PROBE_RSA (1 << 0) /* * Some bits in registers are cleared on a read, so they must -- cgit v1.2.3 From 0fea53e255eaa889fb6cf8e10d11fbea2921eac8 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Fri, 13 Mar 2015 11:09:36 -0700 Subject: tty: serial: Remove orphaned serial driver This driver is orphaned now that mach-msm has been removed. Delete it. Cc: Greg Kroah-Hartman Cc: David Brown Cc: Bryan Huntsman Cc: Daniel Walker Signed-off-by: Stephen Boyd Signed-off-by: Greg Kroah-Hartman --- include/linux/platform_data/msm_serial_hs.h | 49 ----------------------------- 1 file changed, 49 deletions(-) delete mode 100644 include/linux/platform_data/msm_serial_hs.h (limited to 'include/linux') diff --git a/include/linux/platform_data/msm_serial_hs.h b/include/linux/platform_data/msm_serial_hs.h deleted file mode 100644 index 98a2046f8b31..000000000000 --- a/include/linux/platform_data/msm_serial_hs.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Copyright (C) 2008 Google, Inc. - * Author: Nick Pelly - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_MSM_SERIAL_HS_H -#define __ASM_ARCH_MSM_SERIAL_HS_H - -#include - -/* API to request the uart clock off or on for low power management - * Clients should call request_clock_off() when no uart data is expected, - * and must call request_clock_on() before any further uart data can be - * received. */ -extern void msm_hs_request_clock_off(struct uart_port *uport); -extern void msm_hs_request_clock_on(struct uart_port *uport); - -/** - * struct msm_serial_hs_platform_data - * @rx_wakeup_irq: Rx activity irq - * @rx_to_inject: extra character to be inserted to Rx tty on wakeup - * @inject_rx: 1 = insert rx_to_inject. 0 = do not insert extra character - * @exit_lpm_cb: function called before every Tx transaction - * - * This is an optional structure required for UART Rx GPIO IRQ based - * wakeup from low power state. UART wakeup can be triggered by RX activity - * (using a wakeup GPIO on the UART RX pin). This should only be used if - * there is not a wakeup GPIO on the UART CTS, and the first RX byte is - * known (eg., with the Bluetooth Texas Instruments HCILL protocol), - * since the first RX byte will always be lost. RTS will be asserted even - * while the UART is clocked off in this mode of operation. - */ -struct msm_serial_hs_platform_data { - int rx_wakeup_irq; - unsigned char inject_rx_on_wakeup; - char rx_to_inject; - void (*exit_lpm_cb)(struct uart_port *); -}; - -#endif -- cgit v1.2.3 From ee97d0e3f06498487671c23cad4230bf9aa5fd88 Mon Sep 17 00:00:00 2001 From: Mans Rullgard Date: Sun, 8 Mar 2015 14:30:04 +0000 Subject: serial: 8250: allow specifying iomem size in addition to address This adds a mapsize field to struct uart_port to be used in conjunction with mapbase. If set, it overrides whatever value serial8250_port_size() would otherwise report. Signed-off-by: Mans Rullgard Signed-off-by: Greg Kroah-Hartman --- include/linux/serial_core.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 8aeec4913a9c..34de16840152 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -237,6 +237,7 @@ struct uart_port { unsigned int line; /* port index */ unsigned int minor; resource_size_t mapbase; /* for ioremap */ + resource_size_t mapsize; struct device *dev; /* parent device */ unsigned char hub6; /* this should be in the 8250 driver */ unsigned char suspended; -- cgit v1.2.3 From 911a88829725572820dad9a168e735c606a2fdcb Mon Sep 17 00:00:00 2001 From: Alex Smith Date: Mon, 9 Mar 2015 14:29:04 +0000 Subject: memory: jz4780-nemc: driver for the NEMC on JZ4780 SoCs Add a driver for the NAND/External Memory Controller (NEMC) on JZ4780 and later SoCs. The primary function of this driver is to configure parameters, such as timings, for external memory devices using data supplied in the device tree. Devices connected to the NEMC are represented in the DT as children of the NEMC node, the driver uses optional properties specified in these child nodes to configure the parameters of each bank. Signed-off-by: Alex Smith Signed-off-by: Zubair Lutfullah Kakakhel Signed-off-by: Greg Kroah-Hartman --- include/linux/jz4780-nemc.h | 43 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) create mode 100644 include/linux/jz4780-nemc.h (limited to 'include/linux') diff --git a/include/linux/jz4780-nemc.h b/include/linux/jz4780-nemc.h new file mode 100644 index 000000000000..e7f1cc7a2284 --- /dev/null +++ b/include/linux/jz4780-nemc.h @@ -0,0 +1,43 @@ +/* + * JZ4780 NAND/external memory controller (NEMC) + * + * Copyright (c) 2015 Imagination Technologies + * Author: Alex Smith + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __LINUX_JZ4780_NEMC_H__ +#define __LINUX_JZ4780_NEMC_H__ + +#include + +struct device; + +/* + * Number of NEMC banks. Note that there are actually 6, but they are numbered + * from 1. + */ +#define JZ4780_NEMC_NUM_BANKS 7 + +/** + * enum jz4780_nemc_bank_type - device types which can be connected to a bank + * @JZ4780_NEMC_BANK_SRAM: SRAM + * @JZ4780_NEMC_BANK_NAND: NAND + */ +enum jz4780_nemc_bank_type { + JZ4780_NEMC_BANK_SRAM, + JZ4780_NEMC_BANK_NAND, +}; + +extern unsigned int jz4780_nemc_num_banks(struct device *dev); + +extern void jz4780_nemc_set_type(struct device *dev, unsigned int bank, + enum jz4780_nemc_bank_type type); +extern void jz4780_nemc_assert(struct device *dev, unsigned int bank, + bool assert); + +#endif /* __LINUX_JZ4780_NEMC_H__ */ -- cgit v1.2.3 From fe87414f71d0035756cf91a80ac256557d16b488 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Wed, 12 Mar 2014 18:33:45 +0200 Subject: ARM: OMAP2+: PRCM: split PRCM module init to their own driver files Splits the clock related provider module inits under their own driver files. Previously this was done for all modules under the common PRM driver. Signed-off-by: Tero Kristo --- include/linux/clk/ti.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h index 19895a3f48b7..79b76e13d904 100644 --- a/include/linux/clk/ti.h +++ b/include/linux/clk/ti.h @@ -215,15 +215,14 @@ struct ti_dt_clk { .node_name = name, \ } -/* Maximum number of clock memmaps */ -#define CLK_MAX_MEMMAPS 4 - /* Static memmap indices */ enum { TI_CLKM_CM = 0, TI_CLKM_CM2, TI_CLKM_PRM, TI_CLKM_SCRM, + TI_CLKM_CTRL, + CLK_MAX_MEMMAPS }; typedef void (*ti_of_clk_init_cb_t)(struct clk_hw *, struct device_node *); -- cgit v1.2.3 From 772742a6c7ea4612fe043353531e6435ed33e719 Mon Sep 17 00:00:00 2001 From: "Suzuki K. Poulose" Date: Wed, 18 Mar 2015 12:24:40 +0000 Subject: arm-cci: Get rid of secure transactions for PMU driver Avoid secure transactions while probing the CCI PMU. The existing code makes use of the Peripheral ID2 (PID2) register to determine the revision of the CCI400, which requires a secure transaction. This puts a limitation on the usage of the driver on systems running non-secure Linux(e.g, ARM64). Updated the device-tree binding for cci pmu node to add the explicit revision number for the compatible field. The supported strings are : arm,cci-400-pmu,r0 arm,cci-400-pmu,r1 arm,cci-400-pmu - DEPRECATED. See NOTE below NOTE: If the revision is not mentioned, we need to probe the cci revision, which could be fatal on a platform running non-secure. We need a reliable way to know if we can poke the CCI registers at runtime on ARM32. We depend on 'mcpm_is_available()' when it is available. mcpm_is_available() returns true only when there is a registered driver for mcpm. Otherwise, we assume that we don't have secure access, and skips probing the revision number(ARM64 case). The MCPM should figure out if it is safe to access the CCI. Unfortunately there isn't a reliable way to indicate the same via dtb. This patch doesn't address/change the current situation. It only deals with the CCI-PMU, leaving the assumptions about the secure access as it has been, prior to this patch. Cc: devicetree@vger.kernel.org Cc: Punit Agrawal Tested-by: Sudeep Holla Acked-by: Nicolas Pitre Acked-by: Mark Rutland Signed-off-by: Suzuki K. Poulose Signed-off-by: Will Deacon --- include/linux/arm-cci.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/arm-cci.h b/include/linux/arm-cci.h index 79d6edf446d5..aede5c765eec 100644 --- a/include/linux/arm-cci.h +++ b/include/linux/arm-cci.h @@ -24,6 +24,8 @@ #include #include +#include + struct device_node; #ifdef CONFIG_ARM_CCI -- cgit v1.2.3 From ee8e5d5fbec0e880b18bbdbfe12de53ab1dec21f Mon Sep 17 00:00:00 2001 From: "Suzuki K. Poulose" Date: Wed, 18 Mar 2015 12:24:41 +0000 Subject: arm-cci: Split the code for PMU vs driver support This patch separates the PMU driver code from the low level CCI driver code and enables the PMU driver for ARM64. Introduces config options for both. ARM_CCI400_PORT_CTRL - controls the low level driver code for CCI400 ports. ARM_CCI400_PMU - controls the PMU driver code ARM_CCI400_COMMON - Common defintions for CCI400 This patch also changes: ARM_CCI - common code for probing the CCI devices. This can be used for adding support for newer CCI versions(e.g, CCI-500). Cc: Bartlomiej Zolnierkiewicz Cc: Kukjin Kim Cc: Abhilash Kesavan Cc: Liviu Dudau Cc: Lorenzo Pieralisi Cc: Sudeep Holla Cc: Nicolas Pitre Cc: Punit Agrawal Acked-by: Sudeep Holla Acked-by: Nicolas Pitre Acked-by: Punit Agrawal Signed-off-by: Suzuki K. Poulose Signed-off-by: Will Deacon --- include/linux/arm-cci.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/arm-cci.h b/include/linux/arm-cci.h index aede5c765eec..521ec1f2e6bc 100644 --- a/include/linux/arm-cci.h +++ b/include/linux/arm-cci.h @@ -30,12 +30,16 @@ struct device_node; #ifdef CONFIG_ARM_CCI extern bool cci_probed(void); +#else +static inline bool cci_probed(void) { return false; } +#endif + +#ifdef CONFIG_ARM_CCI400_PORT_CTRL extern int cci_ace_get_port(struct device_node *dn); extern int cci_disable_port_by_cpu(u64 mpidr); extern int __cci_control_port_by_device(struct device_node *dn, bool enable); extern int __cci_control_port_by_index(u32 port, bool enable); #else -static inline bool cci_probed(void) { return false; } static inline int cci_ace_get_port(struct device_node *dn) { return -ENODEV; @@ -51,6 +55,7 @@ static inline int __cci_control_port_by_index(u32 port, bool enable) return -ENODEV; } #endif + #define cci_disable_port_by_device(dev) \ __cci_control_port_by_device(dev, false) #define cci_enable_port_by_device(dev) \ -- cgit v1.2.3 From 27842bb18b004a2802f4b3221c79ce638c4bf6ee Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Fri, 13 Mar 2015 11:09:39 -0700 Subject: mmc: Remove msm_sdcc driver This driver is orphaned now that mach-msm has been removed. Delete it. Cc: Chris Ball Cc: David Brown Cc: Bryan Huntsman Cc: Daniel Walker Signed-off-by: Stephen Boyd Acked-by: Ulf Hansson Signed-off-by: Kumar Gala --- include/linux/platform_data/mmc-msm_sdcc.h | 27 --------------------------- 1 file changed, 27 deletions(-) delete mode 100644 include/linux/platform_data/mmc-msm_sdcc.h (limited to 'include/linux') diff --git a/include/linux/platform_data/mmc-msm_sdcc.h b/include/linux/platform_data/mmc-msm_sdcc.h deleted file mode 100644 index 55aa873c9396..000000000000 --- a/include/linux/platform_data/mmc-msm_sdcc.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef __MMC_MSM_SDCC_H -#define __MMC_MSM_SDCC_H - -#include -#include -#include - -struct msm_mmc_gpio { - unsigned no; - const char *name; -}; - -struct msm_mmc_gpio_data { - struct msm_mmc_gpio *gpio; - u8 size; -}; - -struct msm_mmc_platform_data { - unsigned int ocr_mask; /* available voltages */ - u32 (*translate_vdd)(struct device *, unsigned int); - unsigned int (*status)(struct device *); - int (*register_status_notify)(void (*callback)(int card_present, void *dev_id), void *dev_id); - struct msm_mmc_gpio_data *gpio_data; - void (*init_card)(struct mmc_card *card); -}; - -#endif -- cgit v1.2.3 From 4e59080397faadee59d39ffa2116dc8607adc9c9 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 9 Mar 2015 14:01:25 -0400 Subject: NFSv4.1: Allow getdeviceinfo to return notification info back to caller We are only allowed to cache deviceinfo if the server supports notifications and actually promises to call us back when changes occur. Right now, we request those notifications, but then we don't check the server's reply. Signed-off-by: Trond Myklebust --- include/linux/nfs_xdr.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index 4cb3eaa89cf7..3d88908fd140 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -255,11 +255,13 @@ struct nfs4_layoutget { struct nfs4_getdeviceinfo_args { struct nfs4_sequence_args seq_args; struct pnfs_device *pdev; + __u32 notify_types; }; struct nfs4_getdeviceinfo_res { struct nfs4_sequence_res seq_res; struct pnfs_device *pdev; + __u32 notification; }; struct nfs4_layoutcommit_args { -- cgit v1.2.3 From 9e1681c2e74bdd84bad6f74b47a4d88ad2f433df Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 25 Mar 2015 17:23:31 -0400 Subject: NFSv4: Truncating file opens should also sync O_DIRECT writes We don't just want to sync out buffered writes, but also O_DIRECT ones. Signed-off-by: Trond Myklebust --- include/linux/nfs_fs.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index b01ccf371fdc..b638eb6727c6 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -512,6 +512,7 @@ extern int nfs_updatepage(struct file *, struct page *, unsigned int, unsigned * Try to write back everything synchronously (but check the * return value!) */ +extern int nfs_sync_inode(struct inode *inode); extern int nfs_wb_all(struct inode *inode); extern int nfs_wb_page(struct inode *inode, struct page* page); extern int nfs_wb_page_cancel(struct inode *inode, struct page* page); -- cgit v1.2.3 From 8cc7f33aadc8fb37b5a3f4c46f5fa83748a92a01 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Fri, 13 Mar 2015 00:38:39 -0700 Subject: mtd: spi-nor: factor out replace-able flash_{lock,unlock} Flash lock/unlock is a flash-specific operations. Factor out a callback for it to more readily support other vendors. Signed-off-by: Brian Norris Tested-by: VIET NGA DAO --- include/linux/mtd/spi-nor.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index 4720b86ee73d..e5409524bb0a 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -155,6 +155,8 @@ enum spi_nor_option_flags { * @write: [DRIVER-SPECIFIC] write data to the SPI NOR * @erase: [DRIVER-SPECIFIC] erase a sector of the SPI NOR * at the offset @offs + * @lock: [FLASH-SPECIFIC] lock a region of the SPI NOR + * @unlock: [FLASH-SPECIFIC] unlock a region of the SPI NOR * @priv: the private data */ struct spi_nor { @@ -189,6 +191,9 @@ struct spi_nor { size_t len, size_t *retlen, const u_char *write_buf); int (*erase)(struct spi_nor *nor, loff_t offs); + int (*flash_lock)(struct spi_nor *nor, loff_t ofs, uint64_t len); + int (*flash_unlock)(struct spi_nor *nor, loff_t ofs, uint64_t len); + void *priv; }; -- cgit v1.2.3 From dbbc14775ae395a50d91f22904670ca4c9297542 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Mon, 30 Mar 2015 14:33:33 -0400 Subject: SUNRPC: Introduce missing well-known netids Signed-off-by: Chuck Lever Signed-off-by: Anna Schumaker --- include/linux/sunrpc/msg_prot.h | 8 +++++++- include/linux/sunrpc/xprtrdma.h | 5 ----- 2 files changed, 7 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sunrpc/msg_prot.h b/include/linux/sunrpc/msg_prot.h index aadc6a04e1ac..807371357160 100644 --- a/include/linux/sunrpc/msg_prot.h +++ b/include/linux/sunrpc/msg_prot.h @@ -142,12 +142,18 @@ typedef __be32 rpc_fraghdr; (RPC_REPHDRSIZE + (2 + RPC_MAX_AUTH_SIZE/4)) /* - * RFC1833/RFC3530 rpcbind (v3+) well-known netid's. + * Well-known netids. See: + * + * http://www.iana.org/assignments/rpc-netids/rpc-netids.xhtml */ #define RPCBIND_NETID_UDP "udp" #define RPCBIND_NETID_TCP "tcp" +#define RPCBIND_NETID_RDMA "rdma" +#define RPCBIND_NETID_SCTP "sctp" #define RPCBIND_NETID_UDP6 "udp6" #define RPCBIND_NETID_TCP6 "tcp6" +#define RPCBIND_NETID_RDMA6 "rdma6" +#define RPCBIND_NETID_SCTP6 "sctp6" #define RPCBIND_NETID_LOCAL "local" /* diff --git a/include/linux/sunrpc/xprtrdma.h b/include/linux/sunrpc/xprtrdma.h index 64a0a0a97b23..c984c85981ea 100644 --- a/include/linux/sunrpc/xprtrdma.h +++ b/include/linux/sunrpc/xprtrdma.h @@ -40,11 +40,6 @@ #ifndef _LINUX_SUNRPC_XPRTRDMA_H #define _LINUX_SUNRPC_XPRTRDMA_H -/* - * rpcbind (v3+) RDMA netid. - */ -#define RPCBIND_NETID_RDMA "rdma" - /* * Constants. Max RPC/NFS header is big enough to account for * additional marshaling buffers passed down by Linux client. -- cgit v1.2.3 From caa0e2d0e331a04cbc1cb9bca3169c1d94b80838 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Wed, 1 Apr 2015 08:21:51 +1030 Subject: virtio_config: reorder functions This simply reorders functions in virtio_config so width access wrapper helpers are all together. Drops an extra empty line while we are at it. Signed-off-by: Michael S. Tsirkin Signed-off-by: Rusty Russell --- include/linux/virtio_config.h | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h index ca3ed78e5ec7..22d33034b578 100644 --- a/include/linux/virtio_config.h +++ b/include/linux/virtio_config.h @@ -298,13 +298,6 @@ static inline __virtio64 cpu_to_virtio64(struct virtio_device *vdev, u64 val) } \ } while(0) -static inline u8 virtio_cread8(struct virtio_device *vdev, unsigned int offset) -{ - u8 ret; - vdev->config->get(vdev, offset, &ret, sizeof(ret)); - return ret; -} - /* Read @count fields, @bytes each. */ static inline void __virtio_cread_many(struct virtio_device *vdev, unsigned int offset, @@ -326,7 +319,6 @@ static inline void __virtio_cread_many(struct virtio_device *vdev, } while (gen != old); } - static inline void virtio_cread_bytes(struct virtio_device *vdev, unsigned int offset, void *buf, size_t len) @@ -334,6 +326,13 @@ static inline void virtio_cread_bytes(struct virtio_device *vdev, __virtio_cread_many(vdev, offset, buf, len, 1); } +static inline u8 virtio_cread8(struct virtio_device *vdev, unsigned int offset) +{ + u8 ret; + vdev->config->get(vdev, offset, &ret, sizeof(ret)); + return ret; +} + static inline void virtio_cwrite8(struct virtio_device *vdev, unsigned int offset, u8 val) { -- cgit v1.2.3 From 012665391dfe12bf8a88d1000e627be012c39dbf Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Wed, 1 Apr 2015 13:31:20 +1030 Subject: virtio: drop a useless config read "virtio: core support for config generation" fixed reading up 64 bit values, adding generation checks for such reads. By mistake, it left an explicit get call in place as well. the result is that the value is read twice, the first result is discarded. Not a big deal since this only happens with virtio blk and only on boot ATM, so performance isn't affected, but let's clean it up. Signed-off-by: Michael S. Tsirkin Reviewed-by: Cornelia Huck Signed-off-by: Rusty Russell --- include/linux/virtio_config.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h index 22d33034b578..1e306f727edc 100644 --- a/include/linux/virtio_config.h +++ b/include/linux/virtio_config.h @@ -373,7 +373,6 @@ static inline u64 virtio_cread64(struct virtio_device *vdev, unsigned int offset) { u64 ret; - vdev->config->get(vdev, offset, &ret, sizeof(ret)); __virtio_cread_many(vdev, offset, &ret, 1, sizeof(ret)); return virtio64_to_cpu(vdev, (__force __virtio64)ret); } -- cgit v1.2.3 From aadc3780f31865edc84c587ab718a33a8eeeb09d Mon Sep 17 00:00:00 2001 From: Dexuan Cui Date: Fri, 27 Mar 2015 09:10:10 -0700 Subject: hv: remove the per-channel workqueue It's not necessary any longer, since we can safely run the blocking message handlers in vmbus_connection.work_queue now. Signed-off-by: Dexuan Cui Cc: K. Y. Srinivasan Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- include/linux/hyperv.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index 80e444bfc9dc..902c37aef67e 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -653,8 +653,6 @@ struct vmbus_channel { struct hv_device *device_obj; - struct work_struct work; - enum vmbus_channel_state state; struct vmbus_channel_offer_channel offermsg; @@ -675,7 +673,6 @@ struct vmbus_channel { struct hv_ring_buffer_info outbound; /* send to parent */ struct hv_ring_buffer_info inbound; /* receive from parent */ spinlock_t inbound_lock; - struct workqueue_struct *controlwq; struct vmbus_close_msg close_msg; -- cgit v1.2.3 From 9b174527e7b756cda9f5d9e541f87b7fec9cfdf0 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 18 Feb 2015 14:12:42 -0300 Subject: [media] Add and use IS_REACHABLE macro In the media drivers, the v4l2 core knows about all submodules and calls into them from a common function. However this cannot work if the modules that get called are loadable and the core is built-in. In that case we get drivers/built-in.o: In function `set_type': drivers/media/v4l2-core/tuner-core.c:301: undefined reference to `tea5767_attach' drivers/media/v4l2-core/tuner-core.c:307: undefined reference to `tea5761_attach' drivers/media/v4l2-core/tuner-core.c:349: undefined reference to `tda9887_attach' drivers/media/v4l2-core/tuner-core.c:405: undefined reference to `xc4000_attach' This was working previously, until the IS_ENABLED() macro was used to replace the construct like #if defined(CONFIG_DVB_CX24110) || (defined(CONFIG_DVB_CX24110_MODULE) && defined(MODULE)) with the difference that the new code no longer checks whether it is being built as a loadable module itself. To fix this, this new patch adds an 'IS_REACHABLE' macro, which evaluates true in exactly the condition that was used previously. The downside of this is that this trades an obvious link error for a more subtle runtime failure, but it is clear that the change that introduced the link error was unintentional and it seems better to revert it for now. Also, a similar change was originally created by Trent Piepho and then reverted by teh change to the IS_ENABLED macro. Ideally Kconfig would be used to avoid the case of a broken dependency, or the code restructured in a way to turn around the dependency, but either way would require much larger changes here. Fixes: 7b34be71db53 ("[media] use IS_ENABLED() macro") See-also: c5dec9fb248e ("V4L/DVB (4751): Fix DBV_FE_CUSTOMISE for card drivers compiled into kernel") Signed-off-by: Arnd Bergmann Signed-off-by: Mauro Carvalho Chehab --- include/linux/kconfig.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/linux') diff --git a/include/linux/kconfig.h b/include/linux/kconfig.h index be342b94c640..16cfb3448568 100644 --- a/include/linux/kconfig.h +++ b/include/linux/kconfig.h @@ -43,4 +43,13 @@ */ #define IS_MODULE(option) config_enabled(option##_MODULE) +/* + * IS_REACHABLE(CONFIG_FOO) evaluates to 1 if the currently compiled + * code can call a function defined in code compiled based on CONFIG_FOO. + * This is similar to IS_ENABLED(), but returns false when invoked from + * built-in code when CONFIG_FOO is set to 'm'. + */ +#define IS_REACHABLE(option) (config_enabled(option) || \ + (config_enabled(option##_MODULE) && config_enabled(MODULE))) + #endif /* __LINUX_KCONFIG_H */ -- cgit v1.2.3 From 99492c39f39fc2d8c4ae36ecfb88d7de5d8106b5 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Fri, 3 Apr 2015 08:57:51 -0400 Subject: earlycon: Fix __earlycon_table stride The compiler and the linker must agree on the alignment of struct earlycon_id; empirical testing and commit 07fca0e57fca92 ("tracing: Properly align linker defined symbols") suggests 32-byte alignment is the LCD. Reported-by: Yinghai Lu Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- include/linux/serial_core.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 34de16840152..025dad9dcde4 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -342,7 +342,7 @@ struct earlycon_device { struct earlycon_id { char name[16]; int (*setup)(struct earlycon_device *, const char *options); -}; +} __aligned(32); extern int setup_earlycon(char *buf); extern int of_setup_earlycon(unsigned long addr, -- cgit v1.2.3 From 820ad9752c232239d3278eafe71c2c251ae233d3 Mon Sep 17 00:00:00 2001 From: Martin Fuzzey Date: Wed, 18 Mar 2015 14:53:17 +0100 Subject: clk: clk-gpio-gate: Fix active low The active low flag in the DT cell is currently ignored. This occurs because of_get_named_gpio_flags() does not apply the flags to the underlying struct gpio_desc so the test in clk_register_gpio_gate() was bogus. Note that this patch changes the internal kernel API for clk_register_gpio_gate() but there are currently no other users. Signed-off-by: Martin Fuzzey Acked-by: Jyri Sarha Signed-off-by: Michael Turquette --- include/linux/clk-provider.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 5591ea71a8d1..df695313f975 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -541,7 +541,7 @@ struct clk_gpio { extern const struct clk_ops clk_gpio_gate_ops; struct clk *clk_register_gpio_gate(struct device *dev, const char *name, - const char *parent_name, struct gpio_desc *gpio, + const char *parent_name, unsigned gpio, bool active_low, unsigned long flags); void of_gpio_clk_gate_setup(struct device_node *node); -- cgit v1.2.3 From f6194213cbe871341cd5dfcfe31b4de78ef9503f Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 26 Mar 2015 13:07:29 +0000 Subject: clk: at91: change to using endian agnositc IO Change to using endian agnostic _relaxed IO accessors instead of __raw Signed-off-by: Ben Dooks -- CC: Andrew Victor CC: Nicolas Ferre CC: Jean-Christophe Plagniol-Villard CC: Mike Turquette (maintainer:COMMON CLK FRAMEWORK) CC: Stephen Boyd (maintainer:COMMON CLK FRAMEWORK) CC: linux-kernel@vger.kernel.org (open list:COMMON CLK FRAMEWORK) Signed-off-by: Michael Turquette --- include/linux/clk/at91_pmc.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/clk/at91_pmc.h b/include/linux/clk/at91_pmc.h index c8e3b3d1eded..7669f7618f39 100644 --- a/include/linux/clk/at91_pmc.h +++ b/include/linux/clk/at91_pmc.h @@ -20,10 +20,10 @@ extern void __iomem *at91_pmc_base; #define at91_pmc_read(field) \ - __raw_readl(at91_pmc_base + field) + readl_relaxed(at91_pmc_base + field) #define at91_pmc_write(field, value) \ - __raw_writel(value, at91_pmc_base + field) + writel_relaxed(value, at91_pmc_base + field) #else .extern at91_pmc_base #endif -- cgit v1.2.3 From 9e1a27ea42691429e31f158cce6fc61bc79bb2e9 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Mon, 13 Apr 2015 21:03:49 +0930 Subject: virtio_ring: Update weak barriers to use dma_wmb/rmb This change makes it so that instead of using smp_wmb/rmb which varies depending on the kernel configuration we can can use dma_wmb/rmb which for most architectures should be equal to or slightly more strict than smp_wmb/rmb. The advantage to this is that these barriers are available to uniprocessor builds as well so the performance should improve under such a configuration. Signed-off-by: Alexander Duyck Signed-off-by: Rusty Russell --- include/linux/virtio_ring.h | 23 ++++------------------- 1 file changed, 4 insertions(+), 19 deletions(-) (limited to 'include/linux') diff --git a/include/linux/virtio_ring.h b/include/linux/virtio_ring.h index 67e06fe18c03..8e50888a6d59 100644 --- a/include/linux/virtio_ring.h +++ b/include/linux/virtio_ring.h @@ -21,19 +21,20 @@ * actually quite cheap. */ -#ifdef CONFIG_SMP static inline void virtio_mb(bool weak_barriers) { +#ifdef CONFIG_SMP if (weak_barriers) smp_mb(); else +#endif mb(); } static inline void virtio_rmb(bool weak_barriers) { if (weak_barriers) - smp_rmb(); + dma_rmb(); else rmb(); } @@ -41,26 +42,10 @@ static inline void virtio_rmb(bool weak_barriers) static inline void virtio_wmb(bool weak_barriers) { if (weak_barriers) - smp_wmb(); + dma_wmb(); else wmb(); } -#else -static inline void virtio_mb(bool weak_barriers) -{ - mb(); -} - -static inline void virtio_rmb(bool weak_barriers) -{ - rmb(); -} - -static inline void virtio_wmb(bool weak_barriers) -{ - wmb(); -} -#endif struct virtio_device; struct virtqueue; -- cgit v1.2.3 From d616a703a52cf972425cddd43fc01cd4ef867faf Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 5 Apr 2015 16:59:25 +0200 Subject: of: Add dummy of_irq_to_resource_table() for IRQ_OF=n If CONFIG_IRQ_OF=n: drivers/built-in.o: In function `of_device_alloc': (.text+0x72bce): undefined reference to `of_irq_to_resource_table' make: *** [vmlinux] Error 1 of_device_alloc() calls of_irq_to_resource_table() with nr_irqs = 0 due to of_irq_count() already being a dummy, so just add a dummy for of_irq_to_resource_table(), too. Signed-off-by: Geert Uytterhoeven Signed-off-by: Rob Herring --- include/linux/of_irq.h | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/of_irq.h b/include/linux/of_irq.h index bfec136a6d1e..d884929a7747 100644 --- a/include/linux/of_irq.h +++ b/include/linux/of_irq.h @@ -37,8 +37,6 @@ extern int of_irq_parse_one(struct device_node *device, int index, extern unsigned int irq_create_of_mapping(struct of_phandle_args *irq_data); extern int of_irq_to_resource(struct device_node *dev, int index, struct resource *r); -extern int of_irq_to_resource_table(struct device_node *dev, - struct resource *res, int nr_irqs); extern void of_irq_init(const struct of_device_id *matches); @@ -46,6 +44,8 @@ extern void of_irq_init(const struct of_device_id *matches); extern int of_irq_count(struct device_node *dev); extern int of_irq_get(struct device_node *dev, int index); extern int of_irq_get_byname(struct device_node *dev, const char *name); +extern int of_irq_to_resource_table(struct device_node *dev, + struct resource *res, int nr_irqs); #else static inline int of_irq_count(struct device_node *dev) { @@ -59,6 +59,11 @@ static inline int of_irq_get_byname(struct device_node *dev, const char *name) { return 0; } +static inline int of_irq_to_resource_table(struct device_node *dev, + struct resource *res, int nr_irqs) +{ + return 0; +} #endif #if defined(CONFIG_OF) -- cgit v1.2.3 From 37786c7fee40771d13901de129af7e084ed48b55 Mon Sep 17 00:00:00 2001 From: Kevin Cernekee Date: Thu, 9 Apr 2015 13:05:14 -0700 Subject: of: Add helper function to check MMIO register endianness SoC peripherals can come in several different flavors: - little-endian: registers always need to be accessed in LE mode (so the kernel should perform a swap if the CPU is running BE) - big-endian: registers always need to be accessed in BE mode (so the kernel should perform a swap if the CPU is running LE) - native-endian: the bus will automatically swap accesses, so the kernel should never swap Introduce a function that checks an OF device node to see whether it contains a "big-endian" or "native-endian" property. For the former case, always return true. For the latter case, return true iff the kernel was built for BE (implying that the BE MMIO accessors do not perform a swap). Otherwise return false, assuming LE registers. LE registers are assumed by default because most existing drivers (libahci, serial8250, usb) always use readl/writel in the absence of instructions to the contrary, so that will be our fallback. Signed-off-by: Kevin Cernekee Reviewed-by: Peter Hurley Acked-by: Greg Kroah-Hartman Signed-off-by: Rob Herring --- include/linux/of.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/of.h b/include/linux/of.h index dfde07e77a63..a0cd62ef22db 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -305,6 +305,7 @@ extern int of_property_read_string_helper(struct device_node *np, extern int of_device_is_compatible(const struct device_node *device, const char *); extern bool of_device_is_available(const struct device_node *device); +extern bool of_device_is_big_endian(const struct device_node *device); extern const void *of_get_property(const struct device_node *node, const char *name, int *lenp); @@ -466,6 +467,11 @@ static inline bool of_device_is_available(const struct device_node *device) return false; } +static inline bool of_device_is_big_endian(const struct device_node *device) +{ + return false; +} + static inline struct property *of_find_property(const struct device_node *np, const char *name, int *lenp) -- cgit v1.2.3 From cc7837867a559feba70fdf68eb53c24a84e3712f Mon Sep 17 00:00:00 2001 From: Kevin Cernekee Date: Thu, 9 Apr 2015 13:05:15 -0700 Subject: of/fdt: Add endianness helper function for early init code Provide a libfdt-based equivalent for of_device_is_big_endian(), suitable for use in the early_init_* functions. Signed-off-by: Kevin Cernekee Reviewed-by: Peter Hurley Acked-by: Greg Kroah-Hartman Signed-off-by: Rob Herring --- include/linux/of_fdt.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/of_fdt.h b/include/linux/of_fdt.h index 0ff360d5b3b3..587ee507965d 100644 --- a/include/linux/of_fdt.h +++ b/include/linux/of_fdt.h @@ -33,6 +33,8 @@ extern void *of_fdt_get_property(const void *blob, extern int of_fdt_is_compatible(const void *blob, unsigned long node, const char *compat); +extern bool of_fdt_is_big_endian(const void *blob, + unsigned long node); extern int of_fdt_match(const void *blob, unsigned long node, const char *const *compat); extern void of_fdt_unflatten_tree(unsigned long *blob, -- cgit v1.2.3 From 9abbfb486f5c254805bb6a3f263bc14d989eb90b Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Wed, 15 Apr 2015 10:17:45 +0930 Subject: virtio: drop virtio_device_is_legacy_only virtio_device_is_legacy_only is now unused, drop it from core. Signed-off-by: Michael S. Tsirkin Reviewed-by: Cornelia Huck Signed-off-by: Rusty Russell --- include/linux/virtio.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/virtio.h b/include/linux/virtio.h index 28f0e65b9a11..8f4d4bfa6d46 100644 --- a/include/linux/virtio.h +++ b/include/linux/virtio.h @@ -108,8 +108,6 @@ struct virtio_device { void *priv; }; -bool virtio_device_is_legacy_only(struct virtio_device_id id); - static inline struct virtio_device *dev_to_virtio(struct device *_dev) { return container_of(_dev, struct virtio_device, dev); -- cgit v1.2.3 From 773af94e4e3984d4055c332602de5d0d2ee3d840 Mon Sep 17 00:00:00 2001 From: Yishai Hadas Date: Tue, 3 Mar 2015 10:54:48 +0200 Subject: net/mlx4_core: Manage alias GUID per VF Manages alias GUIDs per VF per port in the core layer. This is a pre-step for managing alias GUIDs in a mode that the admin GUID is returned via ib_query_gid() regardless of whether the SM has approved it or not. Signed-off-by: Yishai Hadas Signed-off-by: Jack Morgenstein Signed-off-by: Or Gerlitz Signed-off-by: Doug Ledford --- include/linux/mlx4/device.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index f9ce34bec45b..39a91b0c5d5c 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -1345,6 +1345,9 @@ int mlx4_wol_write(struct mlx4_dev *dev, u64 config, int port); int mlx4_counter_alloc(struct mlx4_dev *dev, u32 *idx); void mlx4_counter_free(struct mlx4_dev *dev, u32 idx); +void mlx4_set_admin_guid(struct mlx4_dev *dev, __be64 guid, int entry, + int port); +__be64 mlx4_get_admin_guid(struct mlx4_dev *dev, int entry, int port); int mlx4_flow_attach(struct mlx4_dev *dev, struct mlx4_net_trans_rule *rule, u64 *reg_id); int mlx4_flow_detach(struct mlx4_dev *dev, u64 reg_id); -- cgit v1.2.3 From fb517a4f03041c5eaed394bd57ee518b44301f1a Mon Sep 17 00:00:00 2001 From: Yishai Hadas Date: Tue, 3 Mar 2015 11:23:32 +0200 Subject: net/mlx4_core: Set initial admin GUIDs for VFs To have out of the box experience, the PF generates random GUIDs who serve as the initial admin values. Signed-off-by: Yishai Hadas Signed-off-by: Jack Morgenstein Signed-off-by: Or Gerlitz Signed-off-by: Doug Ledford --- include/linux/mlx4/device.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index 39a91b0c5d5c..83e80ab94500 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -1348,6 +1348,7 @@ void mlx4_counter_free(struct mlx4_dev *dev, u32 idx); void mlx4_set_admin_guid(struct mlx4_dev *dev, __be64 guid, int entry, int port); __be64 mlx4_get_admin_guid(struct mlx4_dev *dev, int entry, int port); +void mlx4_set_random_admin_guid(struct mlx4_dev *dev, int entry, int port); int mlx4_flow_attach(struct mlx4_dev *dev, struct mlx4_net_trans_rule *rule, u64 *reg_id); int mlx4_flow_detach(struct mlx4_dev *dev, u64 reg_id); -- cgit v1.2.3 From 96541bac0b4e62efa42e7900d9b32e6baa9a214c Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Tue, 14 Apr 2015 13:06:12 +0200 Subject: Revert "mmc: core: Convert mmc_driver to device_driver" This reverts commit 6685ac62b2f0 ("mmc: core: Convert mmc_driver to device_driver") The reverted commit went too far in simplifing the device driver parts for mmc. Let's restore the old mmc_driver to enable driver core to sooner or later to remove the ->probe(), ->remove() and ->shutdown() callbacks from the struct device_driver. Note that, the old ->suspend|resume() callbacks in the struct mmc_driver don't need to be restored, since the mmc block layer has converted to the modern system PM ops. Fixes: 6685ac62b2f0 ("mmc: core: Convert mmc_driver to device_driver") Signed-off-by: Ulf Hansson Acked-by: Jaehoon Chung --- include/linux/mmc/card.h | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index a6cf4c063e4e..19f0175c0afa 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -512,8 +512,18 @@ static inline int mmc_card_broken_irq_polling(const struct mmc_card *c) #define mmc_dev_to_card(d) container_of(d, struct mmc_card, dev) -extern int mmc_register_driver(struct device_driver *); -extern void mmc_unregister_driver(struct device_driver *); +/* + * MMC device driver (e.g., Flash card, I/O card...) + */ +struct mmc_driver { + struct device_driver drv; + int (*probe)(struct mmc_card *); + void (*remove)(struct mmc_card *); + void (*shutdown)(struct mmc_card *); +}; + +extern int mmc_register_driver(struct mmc_driver *); +extern void mmc_unregister_driver(struct mmc_driver *); extern void mmc_fixup_device(struct mmc_card *card, const struct mmc_fixup *table); -- cgit v1.2.3 From e60841b441e1b3d176f235f36c79158dd2ed3ed8 Mon Sep 17 00:00:00 2001 From: Kedareswara rao Appana Date: Mon, 30 Mar 2015 18:48:29 +0530 Subject: dmaengine: vdma: Fix compilation warnings This patch fixes the following compilation warnings. In file included from drivers/dma/xilinx/xilinx_vdma.c:26:0: include/linux/dmapool.h:18:4: warning: 'struct device' declared inside parameter list size_t size, size_t align, size_t allocation); ^ include/linux/dmapool.h:18:4: warning: its scope is only this definition or declaration, which is probably not what you want include/linux/dmapool.h:31:7: warning: 'struct device' declared inside parameter list size_t size, size_t align, size_t allocation); ^ drivers/dma/xilinx/xilinx_vdma.c: In function 'xilinx_vdma_alloc_chan_resources': drivers/dma/xilinx/xilinx_vdma.c:501:20: warning: passing argument 2 of 'dma_pool_create' from incompatible pointer type chan->desc_pool = dma_pool_create("xilinx_vdma_desc_pool", ^ In file included from drivers/dma/xilinx/xilinx_vdma.c:26:0: include/linux/dmapool.h:17:18: note: expected 'struct device *' but argument is of type 'struct device *' struct dma_pool *dma_pool_create(const char *name, struct device *dev, . Signed-off-by: Kedareswara rao Appana Signed-off-by: Vinod Koul --- include/linux/dmapool.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/dmapool.h b/include/linux/dmapool.h index 022e34fcbd1b..52456aa566a0 100644 --- a/include/linux/dmapool.h +++ b/include/linux/dmapool.h @@ -14,6 +14,8 @@ #include #include +struct device; + struct dma_pool *dma_pool_create(const char *name, struct device *dev, size_t size, size_t align, size_t allocation); -- cgit v1.2.3 From 3ef650d3989677bd460497f9c3b0d58caaba0116 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 23 Mar 2015 13:35:03 -0700 Subject: libceph: osdmap.h: Add missing format newlines To avoid possible interleaving, add missing '\n' to formats. Convert pr_warning to pr_warn while there. Signed-off-by: Joe Perches Signed-off-by: Ilya Dryomov --- include/linux/ceph/osdmap.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ceph/osdmap.h b/include/linux/ceph/osdmap.h index 561ea896c657..e55c08bc3a96 100644 --- a/include/linux/ceph/osdmap.h +++ b/include/linux/ceph/osdmap.h @@ -175,13 +175,12 @@ static inline int ceph_decode_pgid(void **p, void *end, struct ceph_pg *pgid) __u8 version; if (!ceph_has_room(p, end, 1 + 8 + 4 + 4)) { - pr_warning("incomplete pg encoding"); - + pr_warn("incomplete pg encoding\n"); return -EINVAL; } version = ceph_decode_8(p); if (version > 1) { - pr_warning("do not understand pg encoding %d > 1", + pr_warn("do not understand pg encoding %d > 1\n", (int)version); return -EINVAL; } -- cgit v1.2.3 From ff40f9ae95917b72b6acb6057471c99054b6ee24 Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Wed, 25 Mar 2015 21:02:16 +0300 Subject: libceph, ceph: split ceph_show_options() Split ceph_show_options() into two pieces and move the piece responsible for printing client (libceph) options into net/ceph. This way people adding a libceph option wouldn't have to remember to update code in fs/ceph. Signed-off-by: Ilya Dryomov --- include/linux/ceph/libceph.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/ceph/libceph.h b/include/linux/ceph/libceph.h index 16fff9608848..303be6ef7f94 100644 --- a/include/linux/ceph/libceph.h +++ b/include/linux/ceph/libceph.h @@ -191,6 +191,7 @@ extern struct ceph_options *ceph_parse_options(char *options, const char *dev_name, const char *dev_name_end, int (*parse_extra_token)(char *c, void *private), void *private); +int ceph_print_client_options(struct seq_file *m, struct ceph_client *client); extern void ceph_destroy_options(struct ceph_options *opt); extern int ceph_compare_options(struct ceph_options *new_opt, struct ceph_client *client); -- cgit v1.2.3 From 5cf7bd30120ead3db43ef9074be38018d9acf22f Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Wed, 25 Mar 2015 21:07:41 +0300 Subject: libceph: expose client options through debugfs Add a client_options attribute for showing libceph options. Signed-off-by: Ilya Dryomov --- include/linux/ceph/libceph.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/ceph/libceph.h b/include/linux/ceph/libceph.h index 303be6ef7f94..30f92cefaa72 100644 --- a/include/linux/ceph/libceph.h +++ b/include/linux/ceph/libceph.h @@ -135,6 +135,7 @@ struct ceph_client { struct dentry *debugfs_dir; struct dentry *debugfs_monmap; struct dentry *debugfs_osdmap; + struct dentry *debugfs_options; #endif }; -- cgit v1.2.3 From 9571eb4f9617e89b3f979a3856b1296eba277bb1 Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Wed, 25 Mar 2015 21:15:17 +0300 Subject: libceph: simplify our debugfs attr macro No need to do single_open()'s job ourselves. Signed-off-by: Ilya Dryomov --- include/linux/ceph/debugfs.h | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ceph/debugfs.h b/include/linux/ceph/debugfs.h index 1df086d7882d..29cf897cc5cd 100644 --- a/include/linux/ceph/debugfs.h +++ b/include/linux/ceph/debugfs.h @@ -7,13 +7,7 @@ #define CEPH_DEFINE_SHOW_FUNC(name) \ static int name##_open(struct inode *inode, struct file *file) \ { \ - struct seq_file *sf; \ - int ret; \ - \ - ret = single_open(file, name, NULL); \ - sf = file->private_data; \ - sf->private = inode->i_private; \ - return ret; \ + return single_open(file, name, inode->i_private); \ } \ \ static const struct file_operations name##_fops = { \ -- cgit v1.2.3 From 4e18b9adf2f910ec4d30b811a74a5b626e6c6125 Mon Sep 17 00:00:00 2001 From: Tom Herbert Date: Mon, 20 Apr 2015 14:10:04 -0700 Subject: net: add skb_checksum_complete_unset This function changes ip_summed to CHECKSUM_NONE if CHECKSUM_COMPLETE is set. This is called to discard checksum-complete when packet is being modified and checksum is not pulled for headers in a layer. Signed-off-by: Tom Herbert Signed-off-by: David S. Miller --- include/linux/skbuff.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include/linux') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 0991259643d6..06793b598f44 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -3016,6 +3016,18 @@ static inline bool __skb_checksum_validate_needed(struct sk_buff *skb, */ #define CHECKSUM_BREAK 76 +/* Unset checksum-complete + * + * Unset checksum complete can be done when packet is being modified + * (uncompressed for instance) and checksum-complete value is + * invalidated. + */ +static inline void skb_checksum_complete_unset(struct sk_buff *skb) +{ + if (skb->ip_summed == CHECKSUM_COMPLETE) + skb->ip_summed = CHECKSUM_NONE; +} + /* Validate (init) checksum based on checksum complete. * * Return values: -- cgit v1.2.3 From d8fbe341beb617ebb22b98fb893e4aa32ae2d864 Mon Sep 17 00:00:00 2001 From: Sumit Semwal Date: Fri, 23 Jan 2015 12:53:43 +0530 Subject: dma-buf: cleanup dma_buf_export() to make it easily extensible At present, dma_buf_export() takes a series of parameters, which makes it difficult to add any new parameters for exporters, if required. Make it simpler by moving all these parameters into a struct, and pass the struct * as parameter to dma_buf_export(). While at it, unite dma_buf_export_named() with dma_buf_export(), and change all callers accordingly. Reviewed-by: Maarten Lankhorst Reviewed-by: Daniel Thompson Acked-by: Mauro Carvalho Chehab Acked-by: Dave Airlie Signed-off-by: Sumit Semwal --- include/linux/dma-buf.h | 34 ++++++++++++++++++++++++++++------ 1 file changed, 28 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/dma-buf.h b/include/linux/dma-buf.h index 694e1fe1c4b4..2f0b431b73e0 100644 --- a/include/linux/dma-buf.h +++ b/include/linux/dma-buf.h @@ -162,6 +162,33 @@ struct dma_buf_attachment { void *priv; }; +/** + * struct dma_buf_export_info - holds information needed to export a dma_buf + * @exp_name: name of the exporting module - useful for debugging. + * @ops: Attach allocator-defined dma buf ops to the new buffer + * @size: Size of the buffer + * @flags: mode flags for the file + * @resv: reservation-object, NULL to allocate default one + * @priv: Attach private data of allocator to this buffer + * + * This structure holds the information required to export the buffer. Used + * with dma_buf_export() only. + */ +struct dma_buf_export_info { + const char *exp_name; + const struct dma_buf_ops *ops; + size_t size; + int flags; + struct reservation_object *resv; + void *priv; +}; + +/** + * helper macro for exporters; zeros and fills in most common values + */ +#define DEFINE_DMA_BUF_EXPORT_INFO(a) \ + struct dma_buf_export_info a = { .exp_name = KBUILD_MODNAME } + /** * get_dma_buf - convenience wrapper for get_file. * @dmabuf: [in] pointer to dma_buf @@ -181,12 +208,7 @@ struct dma_buf_attachment *dma_buf_attach(struct dma_buf *dmabuf, void dma_buf_detach(struct dma_buf *dmabuf, struct dma_buf_attachment *dmabuf_attach); -struct dma_buf *dma_buf_export_named(void *priv, const struct dma_buf_ops *ops, - size_t size, int flags, const char *, - struct reservation_object *); - -#define dma_buf_export(priv, ops, size, flags, resv) \ - dma_buf_export_named(priv, ops, size, flags, KBUILD_MODNAME, resv) +struct dma_buf *dma_buf_export(const struct dma_buf_export_info *exp_info); int dma_buf_fd(struct dma_buf *dmabuf, int flags); struct dma_buf *dma_buf_get(int fd); -- cgit v1.2.3 From bff175238a2416110e2258989c462234baeb5f46 Mon Sep 17 00:00:00 2001 From: Andreas Gruenbacher Date: Fri, 27 Mar 2015 17:50:00 +0100 Subject: uapi: Remove kernel internal declaration The enum nfs4_acl_whotype is only used in nfs4d's internal nfs4 acl representation. No longer expose it to user space. Signed-off-by: Andreas Gruenbacher Signed-off-by: J. Bruce Fields --- include/linux/nfs4.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nfs4.h b/include/linux/nfs4.h index ed43cb74b11d..32201c269890 100644 --- a/include/linux/nfs4.h +++ b/include/linux/nfs4.h @@ -16,6 +16,13 @@ #include #include +enum nfs4_acl_whotype { + NFS4_ACL_WHO_NAMED = 0, + NFS4_ACL_WHO_OWNER, + NFS4_ACL_WHO_GROUP, + NFS4_ACL_WHO_EVERYONE, +}; + struct nfs4_ace { uint32_t type; uint32_t flag; -- cgit v1.2.3 From fe5cbc6e06c7d8b3a86f6f5491d74766bb5c2827 Mon Sep 17 00:00:00 2001 From: Markus Stockhausen Date: Mon, 15 Dec 2014 12:57:04 +1100 Subject: md/raid6 algorithms: delta syndrome functions v3: s-o-b comment, explanation of performance and descision for the start/stop implementation Implementing rmw functionality for RAID6 requires optimized syndrome calculation. Up to now we can only generate a complete syndrome. The target P/Q pages are always overwritten. With this patch we provide a framework for inplace P/Q modification. In the first place simply fill those functions with NULL values. xor_syndrome() has two additional parameters: start & stop. These will indicate the first and last page that are changing during a rmw run. That makes it possible to avoid several unneccessary loops and speed up calculation. The caller needs to implement the following logic to make the functions work. 1) xor_syndrome(disks, start, stop, ...): "Remove" all data of source blocks inside P/Q between (and including) start and end. 2) modify any block with start <= block <= stop 3) xor_syndrome(disks, start, stop, ...): "Reinsert" all data of source blocks into P/Q between (and including) start and end. Pages between start and stop that won't be changed should be filled with a pointer to the kernel zero page. The reasons for not taking NULL pages are: 1) Algorithms cross the whole source data line by line. Thus avoid additional branches. 2) Having a NULL page avoids calculating the XOR P parity but still need calulation steps for the Q parity. Depending on the algorithm unrolling that might be only a difference of 2 instructions per loop. The benchmark numbers of the gen_syndrome() functions are displayed in the kernel log. Do the same for the xor_syndrome() functions. This will help to analyze performance problems and give an rough estimate how well the algorithm works. The choice of the fastest algorithm will still depend on the gen_syndrome() performance. With the start/stop page implementation the speed can vary a lot in real life. E.g. a change of page 0 & page 15 on a stripe will be harder to compute than the case where page 0 & page 1 are XOR candidates. To be not to enthusiatic about the expected speeds we will run a worse case test that simulates a change on the upper half of the stripe. So we do: 1) calculation of P/Q for the upper pages 2) continuation of Q for the lower (empty) pages Signed-off-by: Markus Stockhausen Signed-off-by: NeilBrown --- include/linux/raid/pq.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/raid/pq.h b/include/linux/raid/pq.h index 73069cb6c54a..a7a06d1dcf9c 100644 --- a/include/linux/raid/pq.h +++ b/include/linux/raid/pq.h @@ -72,6 +72,7 @@ extern const char raid6_empty_zero_page[PAGE_SIZE]; /* Routine choices */ struct raid6_calls { void (*gen_syndrome)(int, size_t, void **); + void (*xor_syndrome)(int, int, int, size_t, void **); int (*valid)(void); /* Returns 1 if this routine set is usable */ const char *name; /* Name of this routine set */ int prefer; /* Has special performance attribute */ -- cgit v1.2.3 From 584acdd49cd2472ca0f5a06adbe979db82d0b4af Mon Sep 17 00:00:00 2001 From: Markus Stockhausen Date: Mon, 15 Dec 2014 12:57:05 +1100 Subject: md/raid5: activate raid6 rmw feature Glue it altogehter. The raid6 rmw path should work the same as the already existing raid5 logic. So emulate the prexor handling/flags and split functions as needed. 1) Enable xor_syndrome() in the async layer. 2) Split ops_run_prexor() into RAID4/5 and RAID6 logic. Xor the syndrome at the start of a rmw run as we did it before for the single parity. 3) Take care of rmw run in ops_run_reconstruct6(). Again process only the changed pages to get syndrome back into sync. 4) Enhance set_syndrome_sources() to fill NULL pages if we are in a rmw run. The lower layers will calculate start & end pages from that and call the xor_syndrome() correspondingly. 5) Adapt the several places where we ignored Q handling up to now. Performance numbers for a single E5630 system with a mix of 10 7200k desktop/server disks. 300 seconds random write with 8 threads onto a 3,2TB (10*400GB) RAID6 64K chunk without spare (group_thread_cnt=4) bsize rmw_level=1 rmw_level=0 rmw_level=1 rmw_level=0 skip_copy=1 skip_copy=1 skip_copy=0 skip_copy=0 4K 115 KB/s 141 KB/s 165 KB/s 140 KB/s 8K 225 KB/s 275 KB/s 324 KB/s 274 KB/s 16K 434 KB/s 536 KB/s 640 KB/s 534 KB/s 32K 751 KB/s 1,051 KB/s 1,234 KB/s 1,045 KB/s 64K 1,339 KB/s 1,958 KB/s 2,282 KB/s 1,962 KB/s 128K 2,673 KB/s 3,862 KB/s 4,113 KB/s 3,898 KB/s 256K 7,685 KB/s 7,539 KB/s 7,557 KB/s 7,638 KB/s 512K 19,556 KB/s 19,558 KB/s 19,652 KB/s 19,688 Kb/s Signed-off-by: Markus Stockhausen Signed-off-by: NeilBrown --- include/linux/async_tx.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/async_tx.h b/include/linux/async_tx.h index 179b38ffd351..388574ea38ed 100644 --- a/include/linux/async_tx.h +++ b/include/linux/async_tx.h @@ -60,12 +60,15 @@ struct dma_chan_ref { * dependency chain * @ASYNC_TX_FENCE: specify that the next operation in the dependency * chain uses this operation's result as an input + * @ASYNC_TX_PQ_XOR_DST: do not overwrite the syndrome but XOR it with the + * input data. Required for rmw case. */ enum async_tx_flags { ASYNC_TX_XOR_ZERO_DST = (1 << 0), ASYNC_TX_XOR_DROP_DST = (1 << 1), ASYNC_TX_ACK = (1 << 2), ASYNC_TX_FENCE = (1 << 3), + ASYNC_TX_PQ_XOR_DST = (1 << 4), }; /** -- cgit v1.2.3 From 0140e6141e4f1d4b15fb469e6912b0e71b7d1cc2 Mon Sep 17 00:00:00 2001 From: Sonny Rao Date: Tue, 21 Apr 2015 12:33:11 -0700 Subject: perf/x86/intel/uncore: Move PCI IDs for IMC to uncore driver This keeps all the related PCI IDs together in the driver where they are used. Signed-off-by: Sonny Rao Acked-by: Bjorn Helgaas Cc: Arnaldo Carvalho de Melo Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/r/1429644791-25724-1-git-send-email-sonnyrao@chromium.org Signed-off-by: Ingo Molnar --- include/linux/pci_ids.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index e63c02a93f6b..a59385852233 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2539,10 +2539,6 @@ #define PCI_VENDOR_ID_INTEL 0x8086 #define PCI_DEVICE_ID_INTEL_EESSC 0x0008 -#define PCI_DEVICE_ID_INTEL_SNB_IMC 0x0100 -#define PCI_DEVICE_ID_INTEL_IVB_IMC 0x0154 -#define PCI_DEVICE_ID_INTEL_IVB_E3_IMC 0x0150 -#define PCI_DEVICE_ID_INTEL_HSW_IMC 0x0c00 #define PCI_DEVICE_ID_INTEL_PXHD_0 0x0320 #define PCI_DEVICE_ID_INTEL_PXHD_1 0x0321 #define PCI_DEVICE_ID_INTEL_PXH_0 0x0329 -- cgit v1.2.3 From 0ea611a3bc5fb8f6a0bb1a76fe2dbf8ebe4bdf77 Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Tue, 7 Apr 2015 15:36:32 +0800 Subject: ceph: rename snapshot support Signed-off-by: Yan, Zheng --- include/linux/ceph/ceph_fs.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/ceph/ceph_fs.h b/include/linux/ceph/ceph_fs.h index 31eb03d0c766..d7d072a25c27 100644 --- a/include/linux/ceph/ceph_fs.h +++ b/include/linux/ceph/ceph_fs.h @@ -323,6 +323,7 @@ enum { CEPH_MDS_OP_MKSNAP = 0x01400, CEPH_MDS_OP_RMSNAP = 0x01401, CEPH_MDS_OP_LSSNAP = 0x00402, + CEPH_MDS_OP_RENAMESNAP = 0x01403, }; extern const char *ceph_mds_op_name(int op); -- cgit v1.2.3 From 958a27658d94cf212caeb0ffb04ee0b0bc89cc40 Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Tue, 14 Apr 2015 16:54:52 +0300 Subject: crush: straw2 bucket type with an efficient 64-bit crush_ln() This is an improved straw bucket that correctly avoids any data movement between items A and B when neither A nor B's weights are changed. Said differently, if we adjust the weight of item C (including adding it anew or removing it completely), we will only see inputs move to or from C, never between other items in the bucket. Notably, there is not intermediate scaling factor that needs to be calculated. The mapping function is a simple function of the item weights. The below commits were squashed together into this one (mostly to avoid adding and then yanking a ~6000 lines worth of crush_ln_table): - crush: add a straw2 bucket type - crush: add crush_ln to calculate nature log efficently - crush: improve straw2 adjustment slightly - crush: change crush_ln to provide 32 more digits - crush: fix crush_get_bucket_item_weight and bucket destroy for straw2 - crush/mapper: fix divide-by-0 in straw2 (with div64_s64() for draw = ln / w and INT64_MIN -> S64_MIN - need to create a proper compat.h in ceph.git) Reflects ceph.git commits 242293c908e923d474910f2b8203fa3b41eb5a53, 32a1ead92efcd351822d22a5fc37d159c65c1338, 6289912418c4a3597a11778bcf29ed5415117ad9, 35fcb04e2945717cf5cfe150b9fa89cb3d2303a1, 6445d9ee7290938de1e4ee9563912a6ab6d8ee5f, b5921d55d16796e12d66ad2c4add7305f9ce2353. Signed-off-by: Ilya Dryomov --- include/linux/crush/crush.h | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/crush/crush.h b/include/linux/crush/crush.h index 4fad5f8ee01d..48a1a7d100f1 100644 --- a/include/linux/crush/crush.h +++ b/include/linux/crush/crush.h @@ -96,13 +96,15 @@ struct crush_rule { * uniform O(1) poor poor * list O(n) optimal poor * tree O(log n) good good - * straw O(n) optimal optimal + * straw O(n) better better + * straw2 O(n) optimal optimal */ enum { CRUSH_BUCKET_UNIFORM = 1, CRUSH_BUCKET_LIST = 2, CRUSH_BUCKET_TREE = 3, - CRUSH_BUCKET_STRAW = 4 + CRUSH_BUCKET_STRAW = 4, + CRUSH_BUCKET_STRAW2 = 5, }; extern const char *crush_bucket_alg_name(int alg); @@ -149,6 +151,11 @@ struct crush_bucket_straw { __u32 *straws; /* 16-bit fixed point */ }; +struct crush_bucket_straw2 { + struct crush_bucket h; + __u32 *item_weights; /* 16-bit fixed point */ +}; + /* @@ -189,6 +196,7 @@ extern void crush_destroy_bucket_uniform(struct crush_bucket_uniform *b); extern void crush_destroy_bucket_list(struct crush_bucket_list *b); extern void crush_destroy_bucket_tree(struct crush_bucket_tree *b); extern void crush_destroy_bucket_straw(struct crush_bucket_straw *b); +extern void crush_destroy_bucket_straw2(struct crush_bucket_straw2 *b); extern void crush_destroy_bucket(struct crush_bucket *b); extern void crush_destroy_rule(struct crush_rule *r); extern void crush_destroy(struct crush_map *map); -- cgit v1.2.3 From 7c1c4747f28f59f2939687168203863f7e095d10 Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Tue, 14 Apr 2015 23:13:31 +0300 Subject: libceph: announce support for straw2 buckets Sync up feature bits and enable CEPH_FEATURE_CRUSH_V4. Signed-off-by: Ilya Dryomov --- include/linux/ceph/ceph_features.h | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ceph/ceph_features.h b/include/linux/ceph/ceph_features.h index 71e05bbf8ceb..4763ad64e832 100644 --- a/include/linux/ceph/ceph_features.h +++ b/include/linux/ceph/ceph_features.h @@ -50,6 +50,19 @@ #define CEPH_FEATURE_MDS_INLINE_DATA (1ULL<<40) #define CEPH_FEATURE_CRUSH_TUNABLES3 (1ULL<<41) #define CEPH_FEATURE_OSD_PRIMARY_AFFINITY (1ULL<<41) /* overlap w/ tunables3 */ +#define CEPH_FEATURE_MSGR_KEEPALIVE2 (1ULL<<42) +#define CEPH_FEATURE_OSD_POOLRESEND (1ULL<<43) +#define CEPH_FEATURE_ERASURE_CODE_PLUGINS_V2 (1ULL<<44) +#define CEPH_FEATURE_OSD_SET_ALLOC_HINT (1ULL<<45) +#define CEPH_FEATURE_OSD_FADVISE_FLAGS (1ULL<<46) +#define CEPH_FEATURE_OSD_REPOP (1ULL<<46) /* overlap with fadvise */ +#define CEPH_FEATURE_OSD_OBJECT_DIGEST (1ULL<<46) /* overlap with fadvise */ +#define CEPH_FEATURE_OSD_TRANSACTION_MAY_LAYOUT (1ULL<<46) /* overlap w/ fadvise */ +#define CEPH_FEATURE_MDS_QUOTA (1ULL<<47) +#define CEPH_FEATURE_CRUSH_V4 (1ULL<<48) /* straw2 buckets */ +#define CEPH_FEATURE_OSD_MIN_SIZE_RECOVERY (1ULL<<49) +// duplicated since it was introduced at the same time as MIN_SIZE_RECOVERY +#define CEPH_FEATURE_OSD_PROXY_FEATURES (1ULL<<49) /* overlap w/ above */ /* * The introduction of CEPH_FEATURE_OSD_SNAPMAPPER caused the feature @@ -93,7 +106,8 @@ static inline u64 ceph_sanitize_features(u64 features) CEPH_FEATURE_EXPORT_PEER | \ CEPH_FEATURE_OSDMAP_ENC | \ CEPH_FEATURE_CRUSH_TUNABLES3 | \ - CEPH_FEATURE_OSD_PRIMARY_AFFINITY) + CEPH_FEATURE_OSD_PRIMARY_AFFINITY | \ + CEPH_FEATURE_CRUSH_V4) #define CEPH_FEATURES_REQUIRED_DEFAULT \ (CEPH_FEATURE_NOSRCADDR | \ -- cgit v1.2.3 From f3ca10dde49043fbbb055854278b26954b549b36 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 22 Apr 2015 09:44:36 -0700 Subject: Revert "mm: avoid tail page refcounting on non-THP compound pages" This reverts commit 8d63d99a5dfbdb997d12dd3c07b2070ca723db3b. It causes in VM mapping refcount errors: page:ffffea0010a15040 count:0 mapcount:1 mapping: (null) index:0x0 flags: 0x8000000000008014(referenced|dirty|tail) page dumped because: VM_BUG_ON_PAGE(page_mapcount(page) != 0) ------------[ cut here ]------------ kernel BUG at mm/swap.c:134! as reported by Borislav Petkov Reported-and-tested-by: Borislav Petkov Cc: Kirill A. Shutemov Cc: Hugh Dickins Cc: Andrea Arcangeli Cc: Andrew Morton Cc: linux-mm@kvack.org Signed-off-by: Linus Torvalds --- include/linux/mm.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mm.h b/include/linux/mm.h index 8b086070c3a5..0755b9fd03a7 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -499,7 +499,7 @@ static inline int page_count(struct page *page) static inline bool __compound_tail_refcounted(struct page *page) { - return PageAnon(page) && !PageSlab(page) && !PageHeadHuge(page); + return !PageSlab(page) && !PageHeadHuge(page); } /* -- cgit v1.2.3 From 03c57747a7020a28a200e7e920fb48ecdc9b0fb8 Mon Sep 17 00:00:00 2001 From: Robert Shearman Date: Wed, 22 Apr 2015 11:14:37 +0100 Subject: mpls: Per-device MPLS state Add per-device MPLS state to supported interfaces. Use the presence of this state in mpls_route_add to determine that this is a supported interface. Use the presence of mpls_dev to drop packets that arrived on an unsupported interface - previously they were allowed through. Cc: "Eric W. Biederman" Signed-off-by: Robert Shearman Reviewed-by: "Eric W. Biederman" Signed-off-by: David S. Miller --- include/linux/netdevice.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index bcbde799ec69..dae106a3a998 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -60,6 +60,7 @@ struct phy_device; struct wireless_dev; /* 802.15.4 specific */ struct wpan_dev; +struct mpls_dev; void netdev_set_default_ethtool_ops(struct net_device *dev, const struct ethtool_ops *ops); @@ -1627,6 +1628,9 @@ struct net_device { void *ax25_ptr; struct wireless_dev *ieee80211_ptr; struct wpan_dev *ieee802154_ptr; +#if IS_ENABLED(CONFIG_MPLS_ROUTING) + struct mpls_dev __rcu *mpls_ptr; +#endif /* * Cache lines mostly used on receive path (including eth_type_trans()) -- cgit v1.2.3 From 7e01b5acd88b3f3108d8c4ce44e3205d67437202 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Thu, 16 Apr 2015 14:47:33 +0200 Subject: kexec: allocate the kexec control page with KEXEC_CONTROL_MEMORY_GFP Introduce KEXEC_CONTROL_MEMORY_GFP to allow the architecture code to override the gfp flags of the allocation for the kexec control page. The loop in kimage_alloc_normal_control_pages allocates pages with GFP_KERNEL until a page is found that happens to have an address smaller than the KEXEC_CONTROL_MEMORY_LIMIT. On systems with a large memory size but a small KEXEC_CONTROL_MEMORY_LIMIT the loop will keep allocating memory until the oom killer steps in. Signed-off-by: Martin Schwidefsky --- include/linux/kexec.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/kexec.h b/include/linux/kexec.h index e60a745ac198..e804306ef5e8 100644 --- a/include/linux/kexec.h +++ b/include/linux/kexec.h @@ -40,6 +40,10 @@ #error KEXEC_CONTROL_MEMORY_LIMIT not defined #endif +#ifndef KEXEC_CONTROL_MEMORY_GFP +#define KEXEC_CONTROL_MEMORY_GFP GFP_KERNEL +#endif + #ifndef KEXEC_CONTROL_PAGE_SIZE #error KEXEC_CONTROL_PAGE_SIZE not defined #endif -- cgit v1.2.3 From ec65aafb9e3f316ff9167289e288856a7d528773 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 23 Apr 2015 12:06:30 +0200 Subject: netdev_alloc_pcpu_stats: use less common iterator variable With the CPU iteration variable called 'i', it's relatively easy to have variable shadowing which sparse will warn about. Avoid that by renaming the variable to __cpu which is less likely to be used in the surrounding context. Signed-off-by: Johannes Berg Signed-off-by: David S. Miller --- include/linux/netdevice.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index dae106a3a998..dbad4d728b4b 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2025,10 +2025,10 @@ struct pcpu_sw_netstats { ({ \ typeof(type) __percpu *pcpu_stats = alloc_percpu(type); \ if (pcpu_stats) { \ - int i; \ - for_each_possible_cpu(i) { \ + int __cpu; \ + for_each_possible_cpu(__cpu) { \ typeof(type) *stat; \ - stat = per_cpu_ptr(pcpu_stats, i); \ + stat = per_cpu_ptr(pcpu_stats, __cpu); \ u64_stats_init(&stat->syncp); \ } \ } \ -- cgit v1.2.3 From 9a51940bf65bf9fdc93027d70bdecdfc403c5b24 Mon Sep 17 00:00:00 2001 From: Anna Schumaker Date: Mon, 16 Mar 2015 14:06:23 -0400 Subject: NFS: Don't zap caches on fallocate() This patch adds a GETATTR to the end of ALLOCATE and DEALLOCATE operations so we can set the updated inode size and change attribute directly. DEALLOCATE will still need to release pagecache pages, so nfs42_proc_deallocate() now calls truncate_pagecache_range() before contacting the server. Signed-off-by: Anna Schumaker Signed-off-by: Trond Myklebust --- include/linux/nfs_xdr.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index 3d88908fd140..93ab6071bbe9 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -1273,11 +1273,15 @@ struct nfs42_falloc_args { nfs4_stateid falloc_stateid; u64 falloc_offset; u64 falloc_length; + const u32 *falloc_bitmask; }; struct nfs42_falloc_res { struct nfs4_sequence_res seq_res; unsigned int status; + + struct nfs_fattr *falloc_fattr; + const struct nfs_server *falloc_server; }; struct nfs42_seek_args { -- cgit v1.2.3 From 3f9400981691f6845e5c22b962500742b80a5484 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Tue, 31 Mar 2015 12:03:28 -0400 Subject: sunrpc: make debugfs file creation failure non-fatal v2: gracefully handle the case where some dentry pointers end up NULL and be more dilligent about zeroing out dentry pointers We currently have a problem that SELinux policy is being enforced when creating debugfs files. If a debugfs file is created as a side effect of doing some syscall, then that creation can fail if the SELinux policy for that process prevents it. This seems wrong. We don't do that for files under /proc, for instance, so Bruce has proposed a patch to fix that. While discussing that patch however, Greg K.H. stated: "No kernel code should care / fail if a debugfs function fails, so please fix up the sunrpc code first." This patch converts all of the sunrpc debugfs setup code to be void return functins, and the callers to not look for errors from those functions. This should allow rpc_clnt and rpc_xprt creation to work, even if the kernel fails to create debugfs files for some reason. Cc: Greg Kroah-Hartman Acked-by: "J. Bruce Fields" Signed-off-by: Jeff Layton Signed-off-by: Trond Myklebust --- include/linux/sunrpc/debug.h | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sunrpc/debug.h b/include/linux/sunrpc/debug.h index c57d8ea0716c..59a7889e15db 100644 --- a/include/linux/sunrpc/debug.h +++ b/include/linux/sunrpc/debug.h @@ -60,17 +60,17 @@ struct rpc_xprt; #if IS_ENABLED(CONFIG_SUNRPC_DEBUG) void rpc_register_sysctl(void); void rpc_unregister_sysctl(void); -int sunrpc_debugfs_init(void); +void sunrpc_debugfs_init(void); void sunrpc_debugfs_exit(void); -int rpc_clnt_debugfs_register(struct rpc_clnt *); +void rpc_clnt_debugfs_register(struct rpc_clnt *); void rpc_clnt_debugfs_unregister(struct rpc_clnt *); -int rpc_xprt_debugfs_register(struct rpc_xprt *); +void rpc_xprt_debugfs_register(struct rpc_xprt *); void rpc_xprt_debugfs_unregister(struct rpc_xprt *); #else -static inline int +static inline void sunrpc_debugfs_init(void) { - return 0; + return; } static inline void @@ -79,10 +79,10 @@ sunrpc_debugfs_exit(void) return; } -static inline int +static inline void rpc_clnt_debugfs_register(struct rpc_clnt *clnt) { - return 0; + return; } static inline void @@ -91,10 +91,10 @@ rpc_clnt_debugfs_unregister(struct rpc_clnt *clnt) return; } -static inline int +static inline void rpc_xprt_debugfs_register(struct rpc_xprt *xprt) { - return 0; + return; } static inline void -- cgit v1.2.3 From f9ebd61855253078fe8b07bacaf516337f8078e8 Mon Sep 17 00:00:00 2001 From: Anna Schumaker Date: Wed, 15 Apr 2015 13:00:04 -0400 Subject: NFS: Remove CONFIG_NFS_V4 checks from nfs_idmap.h The idmapper is completely internal to the NFS v4 module, so this macro will always evaluate to true. This patch also removes unnecessary includes of this file from the generic NFS client. Signed-off-by: Anna Schumaker Signed-off-by: Trond Myklebust --- include/linux/nfs_idmap.h | 11 ----------- 1 file changed, 11 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nfs_idmap.h b/include/linux/nfs_idmap.h index 333844e38f66..daaf3ea5e9d8 100644 --- a/include/linux/nfs_idmap.h +++ b/include/linux/nfs_idmap.h @@ -46,19 +46,8 @@ struct nfs_server; struct nfs_fattr; struct nfs4_string; -#if IS_ENABLED(CONFIG_NFS_V4) int nfs_idmap_init(void); void nfs_idmap_quit(void); -#else -static inline int nfs_idmap_init(void) -{ - return 0; -} - -static inline void nfs_idmap_quit(void) -{} -#endif - int nfs_idmap_new(struct nfs_client *); void nfs_idmap_delete(struct nfs_client *); -- cgit v1.2.3 From 40c64c26a43494ba9982fd1b87dc54e3819566fc Mon Sep 17 00:00:00 2001 From: Anna Schumaker Date: Wed, 15 Apr 2015 13:00:05 -0400 Subject: NFS: Move nfs_idmap.h into fs/nfs/ This file is only used internally to the NFS v4 module, so it doesn't need to be in the global include path. I also renamed it from nfs_idmap.h to nfs4idmap.h to emphasize that it's an NFSv4-only include file. Signed-off-by: Anna Schumaker Signed-off-by: Trond Myklebust --- include/linux/nfs_idmap.h | 68 ----------------------------------------------- 1 file changed, 68 deletions(-) delete mode 100644 include/linux/nfs_idmap.h (limited to 'include/linux') diff --git a/include/linux/nfs_idmap.h b/include/linux/nfs_idmap.h deleted file mode 100644 index daaf3ea5e9d8..000000000000 --- a/include/linux/nfs_idmap.h +++ /dev/null @@ -1,68 +0,0 @@ -/* - * include/linux/nfs_idmap.h - * - * UID and GID to name mapping for clients. - * - * Copyright (c) 2002 The Regents of the University of Michigan. - * All rights reserved. - * - * Marius Aamodt Eriksen - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR - * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ -#ifndef NFS_IDMAP_H -#define NFS_IDMAP_H - -#include -#include - - -/* Forward declaration to make this header independent of others */ -struct nfs_client; -struct nfs_server; -struct nfs_fattr; -struct nfs4_string; - -int nfs_idmap_init(void); -void nfs_idmap_quit(void); -int nfs_idmap_new(struct nfs_client *); -void nfs_idmap_delete(struct nfs_client *); - -void nfs_fattr_init_names(struct nfs_fattr *fattr, - struct nfs4_string *owner_name, - struct nfs4_string *group_name); -void nfs_fattr_free_names(struct nfs_fattr *); -void nfs_fattr_map_and_free_names(struct nfs_server *, struct nfs_fattr *); - -int nfs_map_name_to_uid(const struct nfs_server *, const char *, size_t, kuid_t *); -int nfs_map_group_to_gid(const struct nfs_server *, const char *, size_t, kgid_t *); -int nfs_map_uid_to_name(const struct nfs_server *, kuid_t, char *, size_t); -int nfs_map_gid_to_group(const struct nfs_server *, kgid_t, char *, size_t); - -int nfs_map_string_to_numeric(const char *name, size_t namelen, __u32 *res); - -extern unsigned int nfs_idmap_cache_timeout; -#endif /* NFS_IDMAP_H */ -- cgit v1.2.3 From 1d8dc3d3c8f1d8ee1da9d54c5d7c8694419ade42 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 23 Apr 2015 16:38:43 +0200 Subject: rhashtable: don't attempt to grow when at max_size The conversion of mac80211's station table to rhashtable had a bug that I found by accident in code review, that hadn't been found as rhashtable apparently managed to have a maximum hash chain length of one (!) in all our testing. In order to test the bug and verify the fix I set my rhashtable's max_size very low (4) in order to force getting hash collisions. At that point, rhashtable WARNed in rhashtable_insert_rehash() but didn't actually reject the hash table insertion. This caused it to lose insertions - my master list of stations would have 9 entries, but the rhashtable only had 5. This may warrant a deeper look, but that WARN_ON() just shouldn't happen. Fix this by not returning true from rht_grow_above_100() when the rhashtable's max_size has been reached - in this case the user is explicitly configuring it to be at most that big, so even if it's now above 100% it shouldn't attempt to resize. This fixes the "lost insertion" issue and consequently allows my code to display its error (and verify my fix for it.) Signed-off-by: Johannes Berg Acked-by: Thomas Graf Signed-off-by: David S. Miller --- include/linux/rhashtable.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/rhashtable.h b/include/linux/rhashtable.h index e23d242d1230..dbcbcc59aa92 100644 --- a/include/linux/rhashtable.h +++ b/include/linux/rhashtable.h @@ -282,7 +282,8 @@ static inline bool rht_shrink_below_30(const struct rhashtable *ht, static inline bool rht_grow_above_100(const struct rhashtable *ht, const struct bucket_table *tbl) { - return atomic_read(&ht->nelems) > tbl->size; + return atomic_read(&ht->nelems) > tbl->size && + (!ht->p.max_size || tbl->size < ht->p.max_size); } /* The bucket lock is selected based on the hash and protects mutations -- cgit v1.2.3 From 547c4b547e07dcc60874b6ef6252dd49ff74aec1 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Mon, 20 Apr 2015 12:35:47 +0200 Subject: netfilter: bridge: fix NULL deref in physin/out ifindex helpers Might not have an outdev yet. We'll oops when iface goes down while skbs are still nfqueue'd: RIP: 0010:[] [] dev_cmp+0x4f/0x80 nfqnl_rcv_dev_event+0xe2/0x150 notifier_call_chain+0x53/0xa0 Fixes: c737b7c4510026 ("netfilter: bridge: add helpers for fetching physin/outdev") Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter_bridge.h | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netfilter_bridge.h b/include/linux/netfilter_bridge.h index ab8f76dba668..f2fdb5a52070 100644 --- a/include/linux/netfilter_bridge.h +++ b/include/linux/netfilter_bridge.h @@ -39,12 +39,24 @@ static inline void br_drop_fake_rtable(struct sk_buff *skb) static inline int nf_bridge_get_physinif(const struct sk_buff *skb) { - return skb->nf_bridge ? skb->nf_bridge->physindev->ifindex : 0; + struct nf_bridge_info *nf_bridge; + + if (skb->nf_bridge == NULL) + return 0; + + nf_bridge = skb->nf_bridge; + return nf_bridge->physindev ? nf_bridge->physindev->ifindex : 0; } static inline int nf_bridge_get_physoutif(const struct sk_buff *skb) { - return skb->nf_bridge ? skb->nf_bridge->physoutdev->ifindex : 0; + struct nf_bridge_info *nf_bridge; + + if (skb->nf_bridge == NULL) + return 0; + + nf_bridge = skb->nf_bridge; + return nf_bridge->physoutdev ? nf_bridge->physoutdev->ifindex : 0; } static inline struct net_device * -- cgit v1.2.3 From fe0f07d08ee35fb13d2cb048970072fe4f71ad14 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 15 Apr 2015 17:05:48 -0600 Subject: direct-io: only inc/dec inode->i_dio_count for file systems do_blockdev_direct_IO() increments and decrements the inode ->i_dio_count for each IO operation. It does this to protect against truncate of a file. Block devices don't need this sort of protection. For a capable multiqueue setup, this atomic int is the only shared state between applications accessing the device for O_DIRECT, and it presents a scaling wall for that. In my testing, as much as 30% of system time is spent incrementing and decrementing this value. A mixed read/write workload improved from ~2.5M IOPS to ~9.6M IOPS, with better latencies too. Before: clat percentiles (usec): | 1.00th=[ 33], 5.00th=[ 34], 10.00th=[ 34], 20.00th=[ 34], | 30.00th=[ 34], 40.00th=[ 34], 50.00th=[ 35], 60.00th=[ 35], | 70.00th=[ 35], 80.00th=[ 35], 90.00th=[ 37], 95.00th=[ 80], | 99.00th=[ 98], 99.50th=[ 151], 99.90th=[ 155], 99.95th=[ 155], | 99.99th=[ 165] After: clat percentiles (usec): | 1.00th=[ 95], 5.00th=[ 108], 10.00th=[ 129], 20.00th=[ 149], | 30.00th=[ 155], 40.00th=[ 161], 50.00th=[ 167], 60.00th=[ 171], | 70.00th=[ 177], 80.00th=[ 185], 90.00th=[ 201], 95.00th=[ 270], | 99.00th=[ 390], 99.50th=[ 398], 99.90th=[ 418], 99.95th=[ 422], | 99.99th=[ 438] In other setups, Robert Elliott reported seeing good performance improvements: https://lkml.org/lkml/2015/4/3/557 The more applications accessing the device, the worse it gets. Add a new direct-io flags, DIO_SKIP_DIO_COUNT, which tells do_blockdev_direct_IO() that it need not worry about incrementing or decrementing the inode i_dio_count for this caller. Cc: Andrew Morton Cc: Christoph Hellwig Cc: Theodore Ts'o Cc: Elliott, Robert (Server Storage) Cc: Al Viro Signed-off-by: Jens Axboe Signed-off-by: Al Viro --- include/linux/fs.h | 29 ++++++++++++++++++++++++++++- 1 file changed, 28 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index b1d7db28c13c..9055eefa92c7 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2635,6 +2635,9 @@ enum { /* filesystem can handle aio writes beyond i_size */ DIO_ASYNC_EXTEND = 0x04, + + /* inode/fs/bdev does not need truncate protection */ + DIO_SKIP_DIO_COUNT = 0x08, }; void dio_end_io(struct bio *bio, int error); @@ -2657,7 +2660,31 @@ static inline ssize_t blockdev_direct_IO(struct kiocb *iocb, #endif void inode_dio_wait(struct inode *inode); -void inode_dio_done(struct inode *inode); + +/* + * inode_dio_begin - signal start of a direct I/O requests + * @inode: inode the direct I/O happens on + * + * This is called once we've finished processing a direct I/O request, + * and is used to wake up callers waiting for direct I/O to be quiesced. + */ +static inline void inode_dio_begin(struct inode *inode) +{ + atomic_inc(&inode->i_dio_count); +} + +/* + * inode_dio_end - signal finish of a direct I/O requests + * @inode: inode the direct I/O happens on + * + * This is called once we've finished processing a direct I/O request, + * and is used to wake up callers waiting for direct I/O to be quiesced. + */ +static inline void inode_dio_end(struct inode *inode) +{ + if (atomic_dec_and_test(&inode->i_dio_count)) + wake_up_bit(&inode->i_state, __I_DIO_WAKEUP); +} extern void inode_set_flags(struct inode *inode, unsigned int flags, unsigned int mask); -- cgit v1.2.3 From ac74d8d65c83d8061034d0908e1eab6a0c24f923 Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Thu, 16 Apr 2015 15:04:56 -0500 Subject: fix I_DIO_WAKEUP definition I_DIO_WAKEUP is never directly used, but fix it up anyway. Signed-off-by: Eric Sandeen Signed-off-by: Al Viro --- include/linux/fs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 9055eefa92c7..43565607088e 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1812,7 +1812,7 @@ struct super_operations { #define I_SYNC (1 << __I_SYNC) #define I_REFERENCED (1 << 8) #define __I_DIO_WAKEUP 9 -#define I_DIO_WAKEUP (1 << I_DIO_WAKEUP) +#define I_DIO_WAKEUP (1 << __I_DIO_WAKEUP) #define I_LINKABLE (1 << 10) #define I_DIRTY_TIME (1 << 11) #define __I_DIRTY_TIME_EXPIRED 12 -- cgit v1.2.3 From 2ea2f62c8bda242433809c7f4e9eae1c52c40bbe Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 24 Apr 2015 16:05:01 -0700 Subject: net: fix crash in build_skb() When I added pfmemalloc support in build_skb(), I forgot netlink was using build_skb() with a vmalloc() area. In this patch I introduce __build_skb() for netlink use, and build_skb() is a wrapper handling both skb->head_frag and skb->pfmemalloc This means netlink no longer has to hack skb->head_frag [ 1567.700067] kernel BUG at arch/x86/mm/physaddr.c:26! [ 1567.700067] invalid opcode: 0000 [#1] PREEMPT SMP KASAN [ 1567.700067] Dumping ftrace buffer: [ 1567.700067] (ftrace buffer empty) [ 1567.700067] Modules linked in: [ 1567.700067] CPU: 9 PID: 16186 Comm: trinity-c182 Not tainted 4.0.0-next-20150424-sasha-00037-g4796e21 #2167 [ 1567.700067] task: ffff880127efb000 ti: ffff880246770000 task.ti: ffff880246770000 [ 1567.700067] RIP: __phys_addr (arch/x86/mm/physaddr.c:26 (discriminator 3)) [ 1567.700067] RSP: 0018:ffff8802467779d8 EFLAGS: 00010202 [ 1567.700067] RAX: 000041000ed8e000 RBX: ffffc9008ed8e000 RCX: 000000000000002c [ 1567.700067] RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffffffffb3fd6049 [ 1567.700067] RBP: ffff8802467779f8 R08: 0000000000000019 R09: ffff8801d0168000 [ 1567.700067] R10: ffff8801d01680c7 R11: ffffed003a02d019 R12: ffffc9000ed8e000 [ 1567.700067] R13: 0000000000000f40 R14: 0000000000001180 R15: ffffc9000ed8e000 [ 1567.700067] FS: 00007f2a7da3f700(0000) GS:ffff8801d1000000(0000) knlGS:0000000000000000 [ 1567.700067] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1567.700067] CR2: 0000000000738308 CR3: 000000022e329000 CR4: 00000000000007e0 [ 1567.700067] Stack: [ 1567.700067] ffffc9000ed8e000 ffff8801d0168000 ffffc9000ed8e000 ffff8801d0168000 [ 1567.700067] ffff880246777a28 ffffffffad7c0a21 0000000000001080 ffff880246777c08 [ 1567.700067] ffff88060d302e68 ffff880246777b58 ffff880246777b88 ffffffffad9a6821 [ 1567.700067] Call Trace: [ 1567.700067] build_skb (include/linux/mm.h:508 net/core/skbuff.c:316) [ 1567.700067] netlink_sendmsg (net/netlink/af_netlink.c:1633 net/netlink/af_netlink.c:2329) [ 1567.774369] ? sched_clock_cpu (kernel/sched/clock.c:311) [ 1567.774369] ? netlink_unicast (net/netlink/af_netlink.c:2273) [ 1567.774369] ? netlink_unicast (net/netlink/af_netlink.c:2273) [ 1567.774369] sock_sendmsg (net/socket.c:614 net/socket.c:623) [ 1567.774369] sock_write_iter (net/socket.c:823) [ 1567.774369] ? sock_sendmsg (net/socket.c:806) [ 1567.774369] __vfs_write (fs/read_write.c:479 fs/read_write.c:491) [ 1567.774369] ? get_lock_stats (kernel/locking/lockdep.c:249) [ 1567.774369] ? default_llseek (fs/read_write.c:487) [ 1567.774369] ? vtime_account_user (kernel/sched/cputime.c:701) [ 1567.774369] ? rw_verify_area (fs/read_write.c:406 (discriminator 4)) [ 1567.774369] vfs_write (fs/read_write.c:539) [ 1567.774369] SyS_write (fs/read_write.c:586 fs/read_write.c:577) [ 1567.774369] ? SyS_read (fs/read_write.c:577) [ 1567.774369] ? __this_cpu_preempt_check (lib/smp_processor_id.c:63) [ 1567.774369] ? trace_hardirqs_on_caller (kernel/locking/lockdep.c:2594 kernel/locking/lockdep.c:2636) [ 1567.774369] ? trace_hardirqs_on_thunk (arch/x86/lib/thunk_64.S:42) [ 1567.774369] system_call_fastpath (arch/x86/kernel/entry_64.S:261) Fixes: 79930f5892e ("net: do not deplete pfmemalloc reserve") Signed-off-by: Eric Dumazet Reported-by: Sasha Levin Signed-off-by: David S. Miller --- include/linux/skbuff.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 06793b598f44..66e374d62f64 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -773,6 +773,7 @@ bool skb_try_coalesce(struct sk_buff *to, struct sk_buff *from, struct sk_buff *__alloc_skb(unsigned int size, gfp_t priority, int flags, int node); +struct sk_buff *__build_skb(void *data, unsigned int frag_size); struct sk_buff *build_skb(void *data, unsigned int frag_size); static inline struct sk_buff *alloc_skb(unsigned int size, gfp_t priority) -- cgit v1.2.3 From 73459e2a1ada09a68c02cc5b73f3116fc8194b3d Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Thu, 23 Apr 2015 13:20:18 +0200 Subject: x86: pvclock: Really remove the sched notifier for cross-cpu migrations This reverts commits 0a4e6be9ca17c54817cf814b4b5aa60478c6df27 and 80f7fdb1c7f0f9266421f823964fd1962681f6ce. The task migration notifier was originally introduced in order to support the pvclock vsyscall with non-synchronized TSC, but KVM only supports it with synchronized TSC. Hence, on KVM the race condition is only needed due to a bad implementation on the host side, and even then it's so rare that it's mostly theoretical. As far as KVM is concerned it's possible to fix the host, avoiding the additional complexity in the vDSO and the (re)introduction of the task migration notifier. Xen, on the other hand, hasn't yet implemented vsyscall support at all, so we do not care about its plans for non-synchronized TSC. Reported-by: Peter Zijlstra Suggested-by: Marcelo Tosatti Signed-off-by: Paolo Bonzini --- include/linux/sched.h | 8 -------- 1 file changed, 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 8222ae40ecb0..26a2e6122734 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -175,14 +175,6 @@ extern void get_iowait_load(unsigned long *nr_waiters, unsigned long *load); extern void calc_global_load(unsigned long ticks); extern void update_cpu_load_nohz(void); -/* Notifier for when a task gets migrated to a new CPU */ -struct task_migration_notifier { - struct task_struct *task; - int from_cpu; - int to_cpu; -}; -extern void register_task_migration_notifier(struct notifier_block *n); - extern unsigned long get_parent_ip(unsigned long addr); extern void dump_cpu_task(int cpu); -- cgit v1.2.3 From ee136af4a064c2f61e2025873584d2c7ec93f4ae Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 21 Apr 2015 11:20:31 +0200 Subject: uas: Add US_FL_MAX_SECTORS_240 flag The usb-storage driver sets max_sectors = 240 in its scsi-host template, for uas we do not want to do that for all devices, but testing has shown that some devices need it. This commit adds a US_FL_MAX_SECTORS_240 flag for such devices, and implements support for it in uas.c, while at it it also adds support for US_FL_MAX_SECTORS_64 to uas.c. Cc: stable@vger.kernel.org # 3.16 Signed-off-by: Hans de Goede Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- include/linux/usb_usual.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h index a7f2604c5f25..7f5f78bd15ad 100644 --- a/include/linux/usb_usual.h +++ b/include/linux/usb_usual.h @@ -77,6 +77,8 @@ /* Cannot handle ATA_12 or ATA_16 CDBs */ \ US_FLAG(NO_REPORT_OPCODES, 0x04000000) \ /* Cannot handle MI_REPORT_SUPPORTED_OPERATION_CODES */ \ + US_FLAG(MAX_SECTORS_240, 0x08000000) \ + /* Sets max_sectors to 240 */ \ #define US_FLAG(name, value) US_FL_##name = value , enum { US_DO_ALL_FLAGS }; -- cgit v1.2.3 From b00f5c2dc01450bed9fed1a41a637fa917e03c5c Mon Sep 17 00:00:00 2001 From: Frederic Danis Date: Fri, 10 Apr 2015 15:13:05 +0200 Subject: tty: Re-add external interface for tty_set_termios() This is needed by Bluetooth hci_uart module to be able to change speed of Bluetooth controller and local UART. Signed-off-by: Frederic Danis Reviewed-by: Peter Hurley Cc: Marcel Holtmann Signed-off-by: Greg Kroah-Hartman --- include/linux/tty.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/tty.h b/include/linux/tty.h index 358a337af598..fe5623c9af71 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -491,6 +491,7 @@ static inline speed_t tty_get_baud_rate(struct tty_struct *tty) extern void tty_termios_copy_hw(struct ktermios *new, struct ktermios *old); extern int tty_termios_hw_change(struct ktermios *a, struct ktermios *b); +extern int tty_set_termios(struct tty_struct *tty, struct ktermios *kt); extern struct tty_ldisc *tty_ldisc_ref(struct tty_struct *); extern void tty_ldisc_deref(struct tty_ldisc *); -- cgit v1.2.3 From 46c264daaaa569e24f8aba877d0fd8167c42a9a4 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Tue, 28 Apr 2015 18:33:49 +0200 Subject: bridge/nl: remove wrong use of NLM_F_MULTI NLM_F_MULTI must be used only when a NLMSG_DONE message is sent. In fact, it is sent only at the end of a dump. Libraries like libnl will wait forever for NLMSG_DONE. Fixes: e5a55a898720 ("net: create generic bridge ops") Fixes: 815cccbf10b2 ("ixgbe: add setlink, getlink support to ixgbe and ixgbevf") CC: John Fastabend CC: Sathya Perla CC: Subbu Seetharaman CC: Ajit Khaparde CC: Jeff Kirsher CC: intel-wired-lan@lists.osuosl.org CC: Jiri Pirko CC: Scott Feldman CC: Stephen Hemminger CC: bridge@lists.linux-foundation.org Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller --- include/linux/netdevice.h | 6 ++++-- include/linux/rtnetlink.h | 2 +- 2 files changed, 5 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index dbad4d728b4b..1899c74a7127 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -977,7 +977,8 @@ typedef u16 (*select_queue_fallback_t)(struct net_device *dev, * int (*ndo_bridge_setlink)(struct net_device *dev, struct nlmsghdr *nlh, * u16 flags) * int (*ndo_bridge_getlink)(struct sk_buff *skb, u32 pid, u32 seq, - * struct net_device *dev, u32 filter_mask) + * struct net_device *dev, u32 filter_mask, + * int nlflags) * int (*ndo_bridge_dellink)(struct net_device *dev, struct nlmsghdr *nlh, * u16 flags); * @@ -1173,7 +1174,8 @@ struct net_device_ops { int (*ndo_bridge_getlink)(struct sk_buff *skb, u32 pid, u32 seq, struct net_device *dev, - u32 filter_mask); + u32 filter_mask, + int nlflags); int (*ndo_bridge_dellink)(struct net_device *dev, struct nlmsghdr *nlh, u16 flags); diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h index 2da5d1081ad9..7b8e260c4a27 100644 --- a/include/linux/rtnetlink.h +++ b/include/linux/rtnetlink.h @@ -122,5 +122,5 @@ extern int ndo_dflt_fdb_del(struct ndmsg *ndm, extern int ndo_dflt_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq, struct net_device *dev, u16 mode, - u32 flags, u32 mask); + u32 flags, u32 mask, int nlflags); #endif /* __LINUX_RTNETLINK_H */ -- cgit v1.2.3 From 7829fb09a2b4268b30dd9bc782fa5ebee278b137 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Thu, 30 Apr 2015 04:13:52 +0200 Subject: lib: make memzero_explicit more robust against dead store elimination In commit 0b053c951829 ("lib: memzero_explicit: use barrier instead of OPTIMIZER_HIDE_VAR"), we made memzero_explicit() more robust in case LTO would decide to inline memzero_explicit() and eventually find out it could be elimiated as dead store. While using barrier() works well for the case of gcc, recent efforts from LLVMLinux people suggest to use llvm as an alternative to gcc, and there, Stephan found in a simple stand-alone user space example that llvm could nevertheless optimize and thus elimitate the memset(). A similar issue has been observed in the referenced llvm bug report, which is regarded as not-a-bug. Based on some experiments, icc is a bit special on its own, while it doesn't seem to eliminate the memset(), it could do so with an own implementation, and then result in similar findings as with llvm. The fix in this patch now works for all three compilers (also tested with more aggressive optimization levels). Arguably, in the current kernel tree it's more of a theoretical issue, but imho, it's better to be pedantic about it. It's clearly visible with gcc/llvm though, with the below code: if we would have used barrier() only here, llvm would have omitted clearing, not so with barrier_data() variant: static inline void memzero_explicit(void *s, size_t count) { memset(s, 0, count); barrier_data(s); } int main(void) { char buff[20]; memzero_explicit(buff, sizeof(buff)); return 0; } $ gcc -O2 test.c $ gdb a.out (gdb) disassemble main Dump of assembler code for function main: 0x0000000000400400 <+0>: lea -0x28(%rsp),%rax 0x0000000000400405 <+5>: movq $0x0,-0x28(%rsp) 0x000000000040040e <+14>: movq $0x0,-0x20(%rsp) 0x0000000000400417 <+23>: movl $0x0,-0x18(%rsp) 0x000000000040041f <+31>: xor %eax,%eax 0x0000000000400421 <+33>: retq End of assembler dump. $ clang -O2 test.c $ gdb a.out (gdb) disassemble main Dump of assembler code for function main: 0x00000000004004f0 <+0>: xorps %xmm0,%xmm0 0x00000000004004f3 <+3>: movaps %xmm0,-0x18(%rsp) 0x00000000004004f8 <+8>: movl $0x0,-0x8(%rsp) 0x0000000000400500 <+16>: lea -0x18(%rsp),%rax 0x0000000000400505 <+21>: xor %eax,%eax 0x0000000000400507 <+23>: retq End of assembler dump. As gcc, clang, but also icc defines __GNUC__, it's sufficient to define this in compiler-gcc.h only to be picked up. For a fallback or otherwise unsupported compiler, we define it as a barrier. Similarly, for ecc which does not support gcc inline asm. Reference: https://llvm.org/bugs/show_bug.cgi?id=15495 Reported-by: Stephan Mueller Tested-by: Stephan Mueller Signed-off-by: Daniel Borkmann Cc: Theodore Ts'o Cc: Stephan Mueller Cc: Hannes Frederic Sowa Cc: mancha security Cc: Mark Charlebois Cc: Behan Webster Signed-off-by: Herbert Xu --- include/linux/compiler-gcc.h | 16 +++++++++++++++- include/linux/compiler-intel.h | 3 +++ include/linux/compiler.h | 4 ++++ 3 files changed, 22 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h index cdf13ca7cac3..371e560d13cf 100644 --- a/include/linux/compiler-gcc.h +++ b/include/linux/compiler-gcc.h @@ -9,10 +9,24 @@ + __GNUC_MINOR__ * 100 \ + __GNUC_PATCHLEVEL__) - /* Optimization barrier */ + /* The "volatile" is due to gcc bugs */ #define barrier() __asm__ __volatile__("": : :"memory") +/* + * This version is i.e. to prevent dead stores elimination on @ptr + * where gcc and llvm may behave differently when otherwise using + * normal barrier(): while gcc behavior gets along with a normal + * barrier(), llvm needs an explicit input variable to be assumed + * clobbered. The issue is as follows: while the inline asm might + * access any memory it wants, the compiler could have fit all of + * @ptr into memory registers instead, and since @ptr never escaped + * from that, it proofed that the inline asm wasn't touching any of + * it. This version works well with both compilers, i.e. we're telling + * the compiler that the inline asm absolutely may see the contents + * of @ptr. See also: https://llvm.org/bugs/show_bug.cgi?id=15495 + */ +#define barrier_data(ptr) __asm__ __volatile__("": :"r"(ptr) :"memory") /* * This macro obfuscates arithmetic on a variable address so that gcc diff --git a/include/linux/compiler-intel.h b/include/linux/compiler-intel.h index ba147a1727e6..0c9a2f2c2802 100644 --- a/include/linux/compiler-intel.h +++ b/include/linux/compiler-intel.h @@ -13,9 +13,12 @@ /* Intel ECC compiler doesn't support gcc specific asm stmts. * It uses intrinsics to do the equivalent things. */ +#undef barrier_data #undef RELOC_HIDE #undef OPTIMIZER_HIDE_VAR +#define barrier_data(ptr) barrier() + #define RELOC_HIDE(ptr, off) \ ({ unsigned long __ptr; \ __ptr = (unsigned long) (ptr); \ diff --git a/include/linux/compiler.h b/include/linux/compiler.h index 0e41ca0e5927..867722591be2 100644 --- a/include/linux/compiler.h +++ b/include/linux/compiler.h @@ -169,6 +169,10 @@ void ftrace_likely_update(struct ftrace_branch_data *f, int val, int expect); # define barrier() __memory_barrier() #endif +#ifndef barrier_data +# define barrier_data(ptr) barrier() +#endif + /* Unreachable code */ #ifndef unreachable # define unreachable() do { } while (1) -- cgit v1.2.3 From 05836c378c7af9527b98a83746f32c7289a5f3c8 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 5 May 2015 16:23:57 -0700 Subject: util_macros.h: have array pointer point to array of constants Using the new find_closest() macro can result in the following sparse warnings. drivers/hwmon/lm85.c:194:16: warning: incorrect type in initializer (different modifiers) drivers/hwmon/lm85.c:194:16: expected int *__fc_a drivers/hwmon/lm85.c:194:16: got int static const [toplevel] * drivers/hwmon/lm85.c:210:16: warning: incorrect type in initializer (different modifiers) drivers/hwmon/lm85.c:210:16: expected int *__fc_a drivers/hwmon/lm85.c:210:16: got int const *map This is because the array passed to find_closest() will typically be declared as array of constants, but the macro declares a non-constant pointer to it. Signed-off-by: Guenter Roeck Cc: Bartosz Golaszewski Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/util_macros.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/util_macros.h b/include/linux/util_macros.h index d5f4fb69dba3..f9b2ce58039b 100644 --- a/include/linux/util_macros.h +++ b/include/linux/util_macros.h @@ -5,7 +5,7 @@ ({ \ typeof(as) __fc_i, __fc_as = (as) - 1; \ typeof(x) __fc_x = (x); \ - typeof(*a) *__fc_a = (a); \ + typeof(*a) const *__fc_a = (a); \ for (__fc_i = 0; __fc_i < __fc_as; __fc_i++) { \ if (__fc_x op DIV_ROUND_CLOSEST(__fc_a[__fc_i] + \ __fc_a[__fc_i + 1], 2)) \ -- cgit v1.2.3 From d8fd150fe3935e1692bf57c66691e17409ebb9c1 Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Tue, 5 May 2015 16:24:00 -0700 Subject: nilfs2: fix sanity check of btree level in nilfs_btree_root_broken() The range check for b-tree level parameter in nilfs_btree_root_broken() is wrong; it accepts the case of "level == NILFS_BTREE_LEVEL_MAX" even though the level is limited to values in the range of 0 to (NILFS_BTREE_LEVEL_MAX - 1). Since the level parameter is read from storage device and used to index nilfs_btree_path array whose element count is NILFS_BTREE_LEVEL_MAX, it can cause memory overrun during btree operations if the boundary value is set to the level parameter on device. This fixes the broken sanity check and adds a comment to clarify that the upper bound NILFS_BTREE_LEVEL_MAX is exclusive. Signed-off-by: Ryusuke Konishi Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/nilfs2_fs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/nilfs2_fs.h b/include/linux/nilfs2_fs.h index ff3fea3194c6..9abb763e4b86 100644 --- a/include/linux/nilfs2_fs.h +++ b/include/linux/nilfs2_fs.h @@ -460,7 +460,7 @@ struct nilfs_btree_node { /* level */ #define NILFS_BTREE_LEVEL_DATA 0 #define NILFS_BTREE_LEVEL_NODE_MIN (NILFS_BTREE_LEVEL_DATA + 1) -#define NILFS_BTREE_LEVEL_MAX 14 +#define NILFS_BTREE_LEVEL_MAX 14 /* Max level (exclusive) */ /** * struct nilfs_palloc_group_desc - block group descriptor -- cgit v1.2.3