From e69f61862ab833e9b8d3c15b6ce07fd69f3bfecc Mon Sep 17 00:00:00 2001 From: Yacine Belkadi Date: Fri, 12 Jul 2013 20:45:47 +0200 Subject: sched: Fix some kernel-doc warnings When building the htmldocs (in verbose mode), scripts/kernel-doc reports the follwing type of warnings: Warning(kernel/sched/core.c:936): No description found for return value of 'task_curr' ... Fix those by: - adding the missing descriptions - using "Return" sections for the descriptions Signed-off-by: Yacine Belkadi Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1373654747-2389-1-git-send-email-yacine.belkadi.1@gmail.com [ While at it, fix the cpupri_set() explanation. ] Signed-off-by: Ingo Molnar --- include/linux/sched.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 50d04b92ceda..82300247974c 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1532,6 +1532,8 @@ static inline pid_t task_pgrp_nr(struct task_struct *tsk) * Test if a process is not yet dead (at most zombie state) * If pid_alive fails, then pointers within the task structure * can be stale and must not be dereferenced. + * + * Return: 1 if the process is alive. 0 otherwise. */ static inline int pid_alive(struct task_struct *p) { @@ -1543,6 +1545,8 @@ static inline int pid_alive(struct task_struct *p) * @tsk: Task structure to be checked. * * Check if a task structure is the first user space task the kernel created. + * + * Return: 1 if the task structure is init. 0 otherwise. */ static inline int is_global_init(struct task_struct *tsk) { @@ -1893,6 +1897,8 @@ extern struct task_struct *idle_task(int cpu); /** * is_idle_task - is the specified task an idle task? * @p: the task in question. + * + * Return: 1 if @p is an idle task. 0 otherwise. */ static inline bool is_idle_task(const struct task_struct *p) { -- cgit v1.2.3 From a1a8e1dc111d6f05e7164e851e58219d428359e1 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Tue, 16 Jul 2013 15:28:00 +0100 Subject: iio:trigger: Fix use_count race condition When using more than one trigger consumer it can happen that multiple threads perform a read-modify-update cycle on 'use_count' concurrently. This can cause updates to be lost and use_count can get stuck at non-zero value, in which case the IIO core assumes that at least one thread is still running and will wait for it to finish before running any trigger handlers again. This effectively renders the trigger disabled and a reboot is necessary before it can be used again. To fix this make use_count an atomic variable. Also set it to the number of consumers before starting the first consumer, otherwise it might happen that use_count drops to 0 even though not all consumers have been run yet. Signed-off-by: Lars-Peter Clausen Tested-by: Denis Ciocca Signed-off-by: Jonathan Cameron --- include/linux/iio/trigger.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/iio/trigger.h b/include/linux/iio/trigger.h index 3869c525b052..369cf2cd5144 100644 --- a/include/linux/iio/trigger.h +++ b/include/linux/iio/trigger.h @@ -8,6 +8,7 @@ */ #include #include +#include #ifndef _IIO_TRIGGER_H_ #define _IIO_TRIGGER_H_ @@ -61,7 +62,7 @@ struct iio_trigger { struct list_head list; struct list_head alloc_list; - int use_count; + atomic_t use_count; struct irq_chip subirq_chip; int subirq_base; -- cgit v1.2.3 From b1451e546899bc8f450773b2af02e0cd000cf1fa Mon Sep 17 00:00:00 2001 From: "Patil, Rachna" Date: Sat, 20 Jul 2013 17:27:00 +0100 Subject: iio: ti_am335x_adc: Fix wrong samples received on 1st read Previously we tried to read data form ADC even before ADC sequencer finished sampling. This led to wrong samples. We now wait on ADC status register idle bit to be set. Signed-off-by: Patil, Rachna Signed-off-by: Zubair Lutfullah Signed-off-by: Jonathan Cameron --- include/linux/mfd/ti_am335x_tscadc.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h index 8d73fe29796a..db1791bb997a 100644 --- a/include/linux/mfd/ti_am335x_tscadc.h +++ b/include/linux/mfd/ti_am335x_tscadc.h @@ -113,11 +113,27 @@ #define CNTRLREG_8WIRE CNTRLREG_AFE_CTRL(3) #define CNTRLREG_TSCENB BIT(7) +/* FIFO READ Register */ +#define FIFOREAD_DATA_MASK (0xfff << 0) +#define FIFOREAD_CHNLID_MASK (0xf << 16) + +/* Sequencer Status */ +#define SEQ_STATUS BIT(5) + #define ADC_CLK 3000000 #define MAX_CLK_DIV 7 #define TOTAL_STEPS 16 #define TOTAL_CHANNELS 8 +/* +* ADC runs at 3MHz, and it takes +* 15 cycles to latch one data output. +* Hence the idle time for ADC to +* process one sample data would be +* around 5 micro seconds. +*/ +#define IDLE_TIMEOUT 5 /* microsec */ + #define TSCADC_CELLS 2 struct ti_tscadc_dev { -- cgit v1.2.3 From 2816c551c796ec14620325b2c9ed75b9979d3125 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Mon, 29 Jul 2013 19:50:33 +0200 Subject: tracing: trace_remove_event_call() should fail if call/file is in use Change trace_remove_event_call(call) to return the error if this call is active. This is what the callers assume but can't verify outside of the tracing locks. Both trace_kprobe.c/trace_uprobe.c need the additional changes, unregister_trace_probe() should abort if trace_remove_event_call() fails. The caller is going to free this call/file so we must ensure that nobody can use them after trace_remove_event_call() succeeds. debugfs should be fine after the previous changes and event_remove() does TRACE_REG_UNREGISTER, but still there are 2 reasons why we need the additional checks: - There could be a perf_event(s) attached to this tp_event, so the patch checks ->perf_refcount. - TRACE_REG_UNREGISTER can be suppressed by FTRACE_EVENT_FL_SOFT_MODE, so we simply check FTRACE_EVENT_FL_ENABLED protected by event_mutex. Link: http://lkml.kernel.org/r/20130729175033.GB26284@redhat.com Reviewed-by: Masami Hiramatsu Signed-off-by: Oleg Nesterov Signed-off-by: Steven Rostedt --- include/linux/ftrace_event.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h index 4372658c73ae..f98ab063e95e 100644 --- a/include/linux/ftrace_event.h +++ b/include/linux/ftrace_event.h @@ -332,7 +332,7 @@ extern int trace_define_field(struct ftrace_event_call *call, const char *type, const char *name, int offset, int size, int is_signed, int filter_type); extern int trace_add_event_call(struct ftrace_event_call *call); -extern void trace_remove_event_call(struct ftrace_event_call *call); +extern int trace_remove_event_call(struct ftrace_event_call *call); #define is_signed_type(type) (((type)(-1)) < (type)1) -- cgit v1.2.3 From ed5467da0e369e65b247b99eb6403cb79172bcda Mon Sep 17 00:00:00 2001 From: Andrew Vagin Date: Fri, 2 Aug 2013 21:16:43 +0400 Subject: tracing: Fix fields of struct trace_iterator that are zeroed by mistake tracing_read_pipe zeros all fields bellow "seq". The declaration contains a comment about that, but it doesn't help. The first field is "snapshot", it's true when current open file is snapshot. Looks obvious, that it should not be zeroed. The second field is "started". It was converted from cpumask_t to cpumask_var_t (v2.6.28-4983-g4462344), in other words it was converted from cpumask to pointer on cpumask. Currently the reference on "started" memory is lost after the first read from tracing_read_pipe and a proper object will never be freed. The "started" is never dereferenced for trace_pipe, because trace_pipe can't have the TRACE_FILE_ANNOTATE options. Link: http://lkml.kernel.org/r/1375463803-3085183-1-git-send-email-avagin@openvz.org Cc: stable@vger.kernel.org # 2.6.30 Signed-off-by: Andrew Vagin Signed-off-by: Steven Rostedt --- include/linux/ftrace_event.h | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h index f98ab063e95e..120d57a1c3a5 100644 --- a/include/linux/ftrace_event.h +++ b/include/linux/ftrace_event.h @@ -78,6 +78,11 @@ struct trace_iterator { /* trace_seq for __print_flags() and __print_symbolic() etc. */ struct trace_seq tmp_seq; + cpumask_var_t started; + + /* it's true when current open file is snapshot */ + bool snapshot; + /* The below is zeroed out in pipe_read */ struct trace_seq seq; struct trace_entry *ent; @@ -90,10 +95,7 @@ struct trace_iterator { loff_t pos; long idx; - cpumask_var_t started; - - /* it's true when current open file is snapshot */ - bool snapshot; + /* All new field here will be zeroed out in pipe_read */ }; enum trace_iter_flags { -- cgit v1.2.3 From e67bc51e574ffe3c4bc1e09cab7658b1e780b4ce Mon Sep 17 00:00:00 2001 From: Dhaval Giani Date: Fri, 2 Aug 2013 14:47:29 -0400 Subject: tracing: Fix trace_dump_stack() proto when CONFIG_TRACING is not set When CONFIG_TRACING is not enabled, the stub prototype for trace_dump_stack() is incorrect. It has (void) when it should be (int). Link: http://lkml.kernel.org/r/CAPhKKr_H=ukFnBL4WgDOVT5ay2xeF-Ho+CA0DWZX0E2JW-=vSQ@mail.gmail.com Signed-off-by: Dhaval Giani Signed-off-by: Steven Rostedt --- include/linux/kernel.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 3bef14c6586b..482ad2d84a32 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -629,7 +629,7 @@ extern void ftrace_dump(enum ftrace_dump_mode oops_dump_mode); static inline void tracing_start(void) { } static inline void tracing_stop(void) { } static inline void ftrace_off_permanent(void) { } -static inline void trace_dump_stack(void) { } +static inline void trace_dump_stack(int skip) { } static inline void tracing_on(void) { } static inline void tracing_off(void) { } -- cgit v1.2.3 From 7d46daba8dd5df1aa45724518a041ef7163d3ad5 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Mon, 5 Aug 2013 16:05:32 +0300 Subject: mlx5: remove health handler plugin Remove this code, per Dave Miller's request, since it is not being used anywhere in the kernel. Signed-off-by: Eli Cohen Signed-off-by: David S. Miller --- include/linux/mlx5/driver.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h index 2aa258b0ced1..611e65e76b00 100644 --- a/include/linux/mlx5/driver.h +++ b/include/linux/mlx5/driver.h @@ -731,9 +731,6 @@ void mlx5_cq_debugfs_cleanup(struct mlx5_core_dev *dev); int mlx5_db_alloc(struct mlx5_core_dev *dev, struct mlx5_db *db); void mlx5_db_free(struct mlx5_core_dev *dev, struct mlx5_db *db); -typedef void (*health_handler_t)(struct pci_dev *pdev, struct health_buffer __iomem *buf, int size); -int mlx5_register_health_report_handler(health_handler_t handler); -void mlx5_unregister_health_report_handler(void); const char *mlx5_command_str(int command); int mlx5_cmdif_debugfs_init(struct mlx5_core_dev *dev); void mlx5_cmdif_debugfs_cleanup(struct mlx5_core_dev *dev); -- cgit v1.2.3 From 49ccc142f9cbc33fdda18e8fa90c1c5b4a79c0ad Mon Sep 17 00:00:00 2001 From: Mateusz Krawczuk Date: Tue, 6 Aug 2013 18:34:40 +0200 Subject: regmap: Add missing header for !CONFIG_REGMAP stubs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit regmap.h requires linux/err.h if CONFIG_REGMAP is not defined. Without it I get error. CC drivers/media/platform/exynos4-is/fimc-reg.o In file included from drivers/media/platform/exynos4-is/fimc-reg.c:14:0: include/linux/regmap.h: In function ‘regmap_write’: include/linux/regmap.h:525:10: error: ‘EINVAL’ undeclared (first use in this function) include/linux/regmap.h:525:10: note: each undeclared identifier is reported only once for each function it appears in Signed-off-by: Mateusz Krawczuk Signed-off-by: Kyungmin Park Signed-off-by: Mark Brown Cc: stable@kernel.org --- include/linux/regmap.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/regmap.h b/include/linux/regmap.h index 75981d0b57dc..580a5320cc96 100644 --- a/include/linux/regmap.h +++ b/include/linux/regmap.h @@ -15,6 +15,7 @@ #include #include +#include struct module; struct device; -- cgit v1.2.3 From 786615bc1ce84150ded80daea6bd9f6297f48e73 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 5 Aug 2013 16:04:47 -0400 Subject: SUNRPC: If the rpcbind channel is disconnected, fail the call to unregister If rpcbind causes our connection to the AF_LOCAL socket to close after we've registered a service, then we want to be careful about reconnecting since the mount namespace may have changed. By simply refusing to reconnect the AF_LOCAL socket in the case of unregister, we avoid the need to somehow save the mount namespace. While this may lead to some services not unregistering properly, it should be safe. Signed-off-by: Trond Myklebust Cc: Nix Cc: Jeff Layton Cc: stable@vger.kernel.org # 3.9.x --- include/linux/sunrpc/sched.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/sunrpc/sched.h b/include/linux/sunrpc/sched.h index 6d870353674a..1821445708d6 100644 --- a/include/linux/sunrpc/sched.h +++ b/include/linux/sunrpc/sched.h @@ -121,6 +121,7 @@ struct rpc_task_setup { #define RPC_TASK_SOFTCONN 0x0400 /* Fail if can't connect */ #define RPC_TASK_SENT 0x0800 /* message was sent */ #define RPC_TASK_TIMEOUT 0x1000 /* fail with ETIMEDOUT on timeout */ +#define RPC_TASK_NOCONNECT 0x2000 /* return ENOTCONN if not connected */ #define RPC_IS_ASYNC(t) ((t)->tk_flags & RPC_TASK_ASYNC) #define RPC_IS_SWAPPER(t) ((t)->tk_flags & RPC_TASK_SWAPPER) -- cgit v1.2.3 From 8742f229b635bf1c1c84a3dfe5e47c814c20b5c8 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Thu, 8 Aug 2013 18:55:32 +0200 Subject: userns: limit the maximum depth of user_namespace->parent chain Ensure that user_namespace->parent chain can't grow too much. Currently we use the hardroded 32 as limit. Reported-by: Andy Lutomirski Signed-off-by: Oleg Nesterov Signed-off-by: Linus Torvalds --- include/linux/user_namespace.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/user_namespace.h b/include/linux/user_namespace.h index b6b215f13b45..14105c26a836 100644 --- a/include/linux/user_namespace.h +++ b/include/linux/user_namespace.h @@ -23,6 +23,7 @@ struct user_namespace { struct uid_gid_map projid_map; atomic_t count; struct user_namespace *parent; + int level; kuid_t owner; kgid_t group; unsigned int proc_inum; -- cgit v1.2.3 From e0acd0a68ec7dbf6b7a81a87a867ebd7ac9b76c4 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Mon, 12 Aug 2013 18:14:00 +0200 Subject: sched: fix the theoretical signal_wake_up() vs schedule() race This is only theoretical, but after try_to_wake_up(p) was changed to check p->state under p->pi_lock the code like __set_current_state(TASK_INTERRUPTIBLE); schedule(); can miss a signal. This is the special case of wait-for-condition, it relies on try_to_wake_up/schedule interaction and thus it does not need mb() between __set_current_state() and if(signal_pending). However, this __set_current_state() can move into the critical section protected by rq->lock, now that try_to_wake_up() takes another lock we need to ensure that it can't be reordered with "if (signal_pending(current))" check inside that section. The patch is actually one-liner, it simply adds smp_wmb() before spin_lock_irq(rq->lock). This is what try_to_wake_up() already does by the same reason. We turn this wmb() into the new helper, smp_mb__before_spinlock(), for better documentation and to allow the architectures to change the default implementation. While at it, kill smp_mb__after_lock(), it has no callers. Perhaps we can also add smp_mb__before/after_spinunlock() for prepare_to_wait(). Signed-off-by: Oleg Nesterov Acked-by: Peter Zijlstra Signed-off-by: Linus Torvalds --- include/linux/spinlock.h | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/spinlock.h b/include/linux/spinlock.h index 7d537ced949a..75f34949d9ab 100644 --- a/include/linux/spinlock.h +++ b/include/linux/spinlock.h @@ -117,9 +117,17 @@ do { \ #endif /*arch_spin_is_contended*/ #endif -/* The lock does not imply full memory barrier. */ -#ifndef ARCH_HAS_SMP_MB_AFTER_LOCK -static inline void smp_mb__after_lock(void) { smp_mb(); } +/* + * Despite its name it doesn't necessarily has to be a full barrier. + * It should only guarantee that a STORE before the critical section + * can not be reordered with a LOAD inside this section. + * spin_lock() is the one-way barrier, this LOAD can not escape out + * of the region. So the default implementation simply ensures that + * a STORE can not move into the critical section, smp_wmb() should + * serialize it with another STORE done by spin_lock(). + */ +#ifndef smp_mb__before_spinlock +#define smp_mb__before_spinlock() smp_wmb() #endif /** -- cgit v1.2.3 From 179ef71cbc085252e3fe6b8159263a7ed1d88ea4 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Tue, 13 Aug 2013 16:00:49 -0700 Subject: mm: save soft-dirty bits on swapped pages Andy Lutomirski reported that if a page with _PAGE_SOFT_DIRTY bit set get swapped out, the bit is getting lost and no longer available when pte read back. To resolve this we introduce _PTE_SWP_SOFT_DIRTY bit which is saved in pte entry for the page being swapped out. When such page is to be read back from a swap cache we check for bit presence and if it's there we clear it and restore the former _PAGE_SOFT_DIRTY bit back. One of the problem was to find a place in pte entry where we can save the _PTE_SWP_SOFT_DIRTY bit while page is in swap. The _PAGE_PSE was chosen for that, it doesn't intersect with swap entry format stored in pte. Reported-by: Andy Lutomirski Signed-off-by: Cyrill Gorcunov Acked-by: Pavel Emelyanov Cc: Matt Mackall Cc: Xiao Guangrong Cc: Marcelo Tosatti Cc: KOSAKI Motohiro Cc: Stephen Rothwell Cc: Peter Zijlstra Cc: "Aneesh Kumar K.V" Reviewed-by: Minchan Kim Reviewed-by: Wanpeng Li Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/swapops.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/swapops.h b/include/linux/swapops.h index c5fd30d2a415..8d4fa82bfb91 100644 --- a/include/linux/swapops.h +++ b/include/linux/swapops.h @@ -67,6 +67,8 @@ static inline swp_entry_t pte_to_swp_entry(pte_t pte) swp_entry_t arch_entry; BUG_ON(pte_file(pte)); + if (pte_swp_soft_dirty(pte)) + pte = pte_swp_clear_soft_dirty(pte); arch_entry = __pte_to_swp_entry(pte); return swp_entry(__swp_type(arch_entry), __swp_offset(arch_entry)); } -- cgit v1.2.3 From dfa9771a7c4784bafd0673bc7abcee3813088b77 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 13 Aug 2013 16:00:53 -0700 Subject: microblaze: fix clone syscall Fix inadvertent breakage in the clone syscall ABI for Microblaze that was introduced in commit f3268edbe6fe ("microblaze: switch to generic fork/vfork/clone"). The Microblaze syscall ABI for clone takes the parent tid address in the 4th argument; the third argument slot is used for the stack size. The incorrectly-used CLONE_BACKWARDS type assigned parent tid to the 3rd slot. This commit restores the original ABI so that existing userspace libc code will work correctly. All kernel versions from v3.8-rc1 were affected. Signed-off-by: Michal Simek Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/syscalls.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index 4147d700a293..84662ecc7b51 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -802,9 +802,14 @@ asmlinkage long sys_vfork(void); asmlinkage long sys_clone(unsigned long, unsigned long, int __user *, int, int __user *); #else +#ifdef CONFIG_CLONE_BACKWARDS3 +asmlinkage long sys_clone(unsigned long, unsigned long, int, int __user *, + int __user *, int); +#else asmlinkage long sys_clone(unsigned long, unsigned long, int __user *, int __user *, int); #endif +#endif asmlinkage long sys_execve(const char __user *filename, const char __user *const __user *argv, -- cgit v1.2.3 From df54d6fa54275ce59660453e29d1228c2b45a826 Mon Sep 17 00:00:00 2001 From: Radu Caragea Date: Tue, 13 Aug 2013 16:00:59 -0700 Subject: x86 get_unmapped_area(): use proper mmap base for bottom-up direction When the stack is set to unlimited, the bottomup direction is used for mmap-ings but the mmap_base is not used and thus effectively renders ASLR for mmapings along with PIE useless. Cc: Michel Lespinasse Cc: Oleg Nesterov Reviewed-by: Rik van Riel Acked-by: Ingo Molnar Cc: Adrian Sendroiu Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/sched.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index d722490da030..923dd6ea4a0e 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -314,6 +314,7 @@ struct nsproxy; struct user_namespace; #ifdef CONFIG_MMU +extern unsigned long mmap_legacy_base(void); extern void arch_pick_mmap_layout(struct mm_struct *mm); extern unsigned long arch_get_unmapped_area(struct file *, unsigned long, unsigned long, -- cgit v1.2.3 From 0a324f3189ed9c78b1aaf48d88e93cb18643c655 Mon Sep 17 00:00:00 2001 From: Moshe Lazer Date: Wed, 14 Aug 2013 17:46:48 +0300 Subject: net/mlx5_core: Support MANAGE_PAGES and QUERY_PAGES firmware command changes In the previous QUERY_PAGES command version we used one command to get the required amount of boot, init and post init pages. The new version uses the op_mod field to specify whether the query is for the required amount of boot, init or post init pages. In addition the output field size for the required amount of pages increased from 16 to 32 bits. In MANAGE_PAGES command the input_num_entries and output_num_entries fields sizes changed from 16 to 32 bits and the PAS tables offset changed to 0x10. In the pages request event the num_pages field also changed to 32 bits. In the HCA-capabilities-layout the size and location of max_qp_mcg field has been changed to support 24 bits. This patch isn't compatible with firmware versions < 5; however, it turns out that the first GA firmware we will publish will not support previous versions so this should be OK. Signed-off-by: Moshe Lazer Signed-off-by: Eli Cohen Signed-off-by: David S. Miller --- include/linux/mlx5/device.h | 22 ++++++++++------------ include/linux/mlx5/driver.h | 4 ++-- 2 files changed, 12 insertions(+), 14 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mlx5/device.h b/include/linux/mlx5/device.h index 737685e9e852..68029b30c3dc 100644 --- a/include/linux/mlx5/device.h +++ b/include/linux/mlx5/device.h @@ -309,21 +309,20 @@ struct mlx5_hca_cap { __be16 max_desc_sz_rq; u8 rsvd21[2]; __be16 max_desc_sz_sq_dc; - u8 rsvd22[4]; - __be16 max_qp_mcg; - u8 rsvd23; + __be32 max_qp_mcg; + u8 rsvd22[3]; u8 log_max_mcg; - u8 rsvd24; + u8 rsvd23; u8 log_max_pd; - u8 rsvd25; + u8 rsvd24; u8 log_max_xrcd; - u8 rsvd26[42]; + u8 rsvd25[42]; __be16 log_uar_page_sz; - u8 rsvd27[28]; + u8 rsvd26[28]; u8 log_msx_atomic_size_qp; - u8 rsvd28[2]; + u8 rsvd27[2]; u8 log_msx_atomic_size_dc; - u8 rsvd29[76]; + u8 rsvd28[76]; }; @@ -472,9 +471,8 @@ struct mlx5_eqe_cmd { struct mlx5_eqe_page_req { u8 rsvd0[2]; __be16 func_id; - u8 rsvd1[2]; - __be16 num_pages; - __be32 rsvd2[5]; + __be32 num_pages; + __be32 rsvd1[5]; }; union ev_data { diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h index 611e65e76b00..8888381fc150 100644 --- a/include/linux/mlx5/driver.h +++ b/include/linux/mlx5/driver.h @@ -358,7 +358,7 @@ struct mlx5_caps { u32 reserved_lkey; u8 local_ca_ack_delay; u8 log_max_mcg; - u16 max_qp_mcg; + u32 max_qp_mcg; int min_page_sz; }; @@ -691,7 +691,7 @@ void mlx5_pagealloc_cleanup(struct mlx5_core_dev *dev); int mlx5_pagealloc_start(struct mlx5_core_dev *dev); void mlx5_pagealloc_stop(struct mlx5_core_dev *dev); void mlx5_core_req_pages_handler(struct mlx5_core_dev *dev, u16 func_id, - s16 npages); + s32 npages); int mlx5_satisfy_startup_pages(struct mlx5_core_dev *dev, int boot); int mlx5_reclaim_startup_pages(struct mlx5_core_dev *dev); void mlx5_register_debugfs(void); -- cgit v1.2.3