From 5a0b8cb46624cc17fda676d6ae44fb72504f0ad9 Mon Sep 17 00:00:00 2001 From: Gwendal Grignou Date: Tue, 13 Mar 2018 14:23:28 -0700 Subject: iio: cros_ec: Move cros_ec_sensors_core.h in /include Similar to other common iio frameworks, move cros_ec_sensors_core.h from drivers/iio/common/cros_ec_sensors/ to include/linux/iio/common. Signed-off-by: Gwendal Grignou Signed-off-by: Jonathan Cameron --- include/linux/iio/common/cros_ec_sensors_core.h | 180 ++++++++++++++++++++++++ 1 file changed, 180 insertions(+) create mode 100644 include/linux/iio/common/cros_ec_sensors_core.h (limited to 'include/linux') diff --git a/include/linux/iio/common/cros_ec_sensors_core.h b/include/linux/iio/common/cros_ec_sensors_core.h new file mode 100644 index 000000000000..ce16445411ac --- /dev/null +++ b/include/linux/iio/common/cros_ec_sensors_core.h @@ -0,0 +1,180 @@ +/* + * ChromeOS EC sensor hub + * + * Copyright (C) 2016 Google, Inc + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __CROS_EC_SENSORS_CORE_H +#define __CROS_EC_SENSORS_CORE_H + +#include +#include +#include + +enum { + CROS_EC_SENSOR_X, + CROS_EC_SENSOR_Y, + CROS_EC_SENSOR_Z, + CROS_EC_SENSOR_MAX_AXIS, +}; + +/* EC returns sensor values using signed 16 bit registers */ +#define CROS_EC_SENSOR_BITS 16 + +/* + * 4 16 bit channels are allowed. + * Good enough for current sensors, they use up to 3 16 bit vectors. + */ +#define CROS_EC_SAMPLE_SIZE (sizeof(s64) * 2) + +/* Minimum sampling period to use when device is suspending */ +#define CROS_EC_MIN_SUSPEND_SAMPLING_FREQUENCY 1000 /* 1 second */ + +/** + * struct cros_ec_sensors_core_state - state data for EC sensors IIO driver + * @ec: cros EC device structure + * @cmd_lock: lock used to prevent simultaneous access to the + * commands. + * @msg: cros EC command structure + * @param: motion sensor parameters structure + * @resp: motion sensor response structure + * @type: type of motion sensor + * @loc: location where the motion sensor is placed + * @calib: calibration parameters. Note that trigger + * captured data will always provide the calibrated + * data + * @samples: static array to hold data from a single capture. + * For each channel we need 2 bytes, except for + * the timestamp. The timestamp is always last and + * is always 8-byte aligned. + * @read_ec_sensors_data: function used for accessing sensors values + * @cuur_sampl_freq: current sampling period + */ +struct cros_ec_sensors_core_state { + struct cros_ec_device *ec; + struct mutex cmd_lock; + + struct cros_ec_command *msg; + struct ec_params_motion_sense param; + struct ec_response_motion_sense *resp; + + enum motionsensor_type type; + enum motionsensor_location loc; + + s16 calib[CROS_EC_SENSOR_MAX_AXIS]; + + u8 samples[CROS_EC_SAMPLE_SIZE]; + + int (*read_ec_sensors_data)(struct iio_dev *indio_dev, + unsigned long scan_mask, s16 *data); + + int curr_sampl_freq; +}; + +/** + * cros_ec_sensors_read_lpc() - retrieve data from EC shared memory + * @indio_dev: pointer to IIO device + * @scan_mask: bitmap of the sensor indices to scan + * @data: location to store data + * + * This is the safe function for reading the EC data. It guarantees that the + * data sampled was not modified by the EC while being read. + * + * Return: 0 on success, -errno on failure. + */ +int cros_ec_sensors_read_lpc(struct iio_dev *indio_dev, unsigned long scan_mask, + s16 *data); + +/** + * cros_ec_sensors_read_cmd() - retrieve data using the EC command protocol + * @indio_dev: pointer to IIO device + * @scan_mask: bitmap of the sensor indices to scan + * @data: location to store data + * + * Return: 0 on success, -errno on failure. + */ +int cros_ec_sensors_read_cmd(struct iio_dev *indio_dev, unsigned long scan_mask, + s16 *data); + +struct platform_device; +/** + * cros_ec_sensors_core_init() - basic initialization of the core structure + * @pdev: platform device created for the sensors + * @indio_dev: iio device structure of the device + * @physical_device: true if the device refers to a physical device + * + * Return: 0 on success, -errno on failure. + */ +int cros_ec_sensors_core_init(struct platform_device *pdev, + struct iio_dev *indio_dev, bool physical_device); + +/** + * cros_ec_sensors_capture() - the trigger handler function + * @irq: the interrupt number. + * @p: a pointer to the poll function. + * + * On a trigger event occurring, if the pollfunc is attached then this + * handler is called as a threaded interrupt (and hence may sleep). It + * is responsible for grabbing data from the device and pushing it into + * the associated buffer. + * + * Return: IRQ_HANDLED + */ +irqreturn_t cros_ec_sensors_capture(int irq, void *p); + +/** + * cros_ec_motion_send_host_cmd() - send motion sense host command + * @st: pointer to state information for device + * @opt_length: optional length to reduce the response size, useful on the data + * path. Otherwise, the maximal allowed response size is used + * + * When called, the sub-command is assumed to be set in param->cmd. + * + * Return: 0 on success, -errno on failure. + */ +int cros_ec_motion_send_host_cmd(struct cros_ec_sensors_core_state *st, + u16 opt_length); + +/** + * cros_ec_sensors_core_read() - function to request a value from the sensor + * @st: pointer to state information for device + * @chan: channel specification structure table + * @val: will contain one element making up the returned value + * @val2: will contain another element making up the returned value + * @mask: specifies which values to be requested + * + * Return: the type of value returned by the device + */ +int cros_ec_sensors_core_read(struct cros_ec_sensors_core_state *st, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask); + +/** + * cros_ec_sensors_core_write() - function to write a value to the sensor + * @st: pointer to state information for device + * @chan: channel specification structure table + * @val: first part of value to write + * @val2: second part of value to write + * @mask: specifies which values to write + * + * Return: the type of value returned by the device + */ +int cros_ec_sensors_core_write(struct cros_ec_sensors_core_state *st, + struct iio_chan_spec const *chan, + int val, int val2, long mask); + +extern const struct dev_pm_ops cros_ec_sensors_pm_ops; + +/* List of extended channel specification for all sensors */ +extern const struct iio_chan_spec_ext_info cros_ec_sensors_ext_info[]; + +#endif /* __CROS_EC_SENSORS_CORE_H */ -- cgit v1.2.3 From 192af06a287bbfcae0de8fa456dca15767ecd056 Mon Sep 17 00:00:00 2001 From: Alexandru Ardelean Date: Mon, 12 Mar 2018 17:48:15 +0200 Subject: iio: adc: ad7780: remove IIO_CHAN_INFO_SAMP_FREQ support The `ad7780` driver does not implement setting/getting the sampling frequency. For the ad7780/ad7781 devices, the control is done via an external pin, and the ad7170/ad7171 devices have a fixed sampling rate (so, no control). For these devices, and similar other that may be added later on, a AD_SD_CHANNEL_NO_SAMPLE_FREQ() macro has been added, which doesn't set the IIO_CHAN_INFO_SAMP_FREQ flag. Signed-off-by: Alexandru Ardelean Signed-off-by: Jonathan Cameron --- include/linux/iio/adc/ad_sigma_delta.h | 24 +++++++++++++++++------- 1 file changed, 17 insertions(+), 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/iio/adc/ad_sigma_delta.h b/include/linux/iio/adc/ad_sigma_delta.h index 1fc7abd28b0b..730ead1a46df 100644 --- a/include/linux/iio/adc/ad_sigma_delta.h +++ b/include/linux/iio/adc/ad_sigma_delta.h @@ -127,7 +127,7 @@ void ad_sd_cleanup_buffer_and_trigger(struct iio_dev *indio_dev); int ad_sd_validate_trigger(struct iio_dev *indio_dev, struct iio_trigger *trig); #define __AD_SD_CHANNEL(_si, _channel1, _channel2, _address, _bits, \ - _storagebits, _shift, _extend_name, _type) \ + _storagebits, _shift, _extend_name, _type, _mask_all) \ { \ .type = (_type), \ .differential = (_channel2 == -1 ? 0 : 1), \ @@ -139,7 +139,7 @@ int ad_sd_validate_trigger(struct iio_dev *indio_dev, struct iio_trigger *trig); .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ BIT(IIO_CHAN_INFO_OFFSET), \ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ - .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .info_mask_shared_by_all = _mask_all, \ .scan_index = (_si), \ .scan_type = { \ .sign = 'u', \ @@ -153,25 +153,35 @@ int ad_sd_validate_trigger(struct iio_dev *indio_dev, struct iio_trigger *trig); #define AD_SD_DIFF_CHANNEL(_si, _channel1, _channel2, _address, _bits, \ _storagebits, _shift) \ __AD_SD_CHANNEL(_si, _channel1, _channel2, _address, _bits, \ - _storagebits, _shift, NULL, IIO_VOLTAGE) + _storagebits, _shift, NULL, IIO_VOLTAGE, \ + BIT(IIO_CHAN_INFO_SAMP_FREQ)) #define AD_SD_SHORTED_CHANNEL(_si, _channel, _address, _bits, \ _storagebits, _shift) \ __AD_SD_CHANNEL(_si, _channel, _channel, _address, _bits, \ - _storagebits, _shift, "shorted", IIO_VOLTAGE) + _storagebits, _shift, "shorted", IIO_VOLTAGE, \ + BIT(IIO_CHAN_INFO_SAMP_FREQ)) #define AD_SD_CHANNEL(_si, _channel, _address, _bits, \ _storagebits, _shift) \ __AD_SD_CHANNEL(_si, _channel, -1, _address, _bits, \ - _storagebits, _shift, NULL, IIO_VOLTAGE) + _storagebits, _shift, NULL, IIO_VOLTAGE, \ + BIT(IIO_CHAN_INFO_SAMP_FREQ)) + +#define AD_SD_CHANNEL_NO_SAMP_FREQ(_si, _channel, _address, _bits, \ + _storagebits, _shift) \ + __AD_SD_CHANNEL(_si, _channel, -1, _address, _bits, \ + _storagebits, _shift, NULL, IIO_VOLTAGE, 0) #define AD_SD_TEMP_CHANNEL(_si, _address, _bits, _storagebits, _shift) \ __AD_SD_CHANNEL(_si, 0, -1, _address, _bits, \ - _storagebits, _shift, NULL, IIO_TEMP) + _storagebits, _shift, NULL, IIO_TEMP, \ + BIT(IIO_CHAN_INFO_SAMP_FREQ)) #define AD_SD_SUPPLY_CHANNEL(_si, _channel, _address, _bits, _storagebits, \ _shift) \ __AD_SD_CHANNEL(_si, _channel, -1, _address, _bits, \ - _storagebits, _shift, "supply", IIO_VOLTAGE) + _storagebits, _shift, "supply", IIO_VOLTAGE, \ + BIT(IIO_CHAN_INFO_SAMP_FREQ)) #endif -- cgit v1.2.3 From ec1ba3e519c0f46523cf40b83dc71562171b7c08 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 22 Mar 2018 11:17:40 +0100 Subject: regulator: ab8500: Drop AB8540/9540 support The AB8540 was an evolved version of the AB8500, but it was never mass produced or put into products, only reference designs exist. The upstream support was never completed and it is unlikely that this will happen so drop the support for now to simplify maintenance of the AB8500. Cc: Loic Pallardy Signed-off-by: Linus Walleij Signed-off-by: Mark Brown --- include/linux/regulator/ab8500.h | 157 +-------------------------------------- 1 file changed, 1 insertion(+), 156 deletions(-) (limited to 'include/linux') diff --git a/include/linux/regulator/ab8500.h b/include/linux/regulator/ab8500.h index d8ecefaf63ca..6d46f962685d 100644 --- a/include/linux/regulator/ab8500.h +++ b/include/linux/regulator/ab8500.h @@ -49,47 +49,7 @@ enum ab8505_regulator_id { AB8505_NUM_REGULATORS, }; -/* AB9540 regulators */ -enum ab9540_regulator_id { - AB9540_LDO_AUX1, - AB9540_LDO_AUX2, - AB9540_LDO_AUX3, - AB9540_LDO_AUX4, - AB9540_LDO_INTCORE, - AB9540_LDO_TVOUT, - AB9540_LDO_USB, - AB9540_LDO_AUDIO, - AB9540_LDO_ANAMIC1, - AB9540_LDO_ANAMIC2, - AB9540_LDO_DMIC, - AB9540_LDO_ANA, - AB9540_SYSCLKREQ_2, - AB9540_SYSCLKREQ_4, - AB9540_NUM_REGULATORS, -}; - -/* AB8540 regulators */ -enum ab8540_regulator_id { - AB8540_LDO_AUX1, - AB8540_LDO_AUX2, - AB8540_LDO_AUX3, - AB8540_LDO_AUX4, - AB8540_LDO_AUX5, - AB8540_LDO_AUX6, - AB8540_LDO_INTCORE, - AB8540_LDO_TVOUT, - AB8540_LDO_AUDIO, - AB8540_LDO_ANAMIC1, - AB8540_LDO_ANAMIC2, - AB8540_LDO_DMIC, - AB8540_LDO_ANA, - AB8540_LDO_SDIO, - AB8540_SYSCLKREQ_2, - AB8540_SYSCLKREQ_4, - AB8540_NUM_REGULATORS, -}; - -/* AB8500, AB8505, and AB9540 register initialization */ +/* AB8500 and AB8505 register initialization */ struct ab8500_regulator_reg_init { int id; u8 mask; @@ -185,121 +145,6 @@ enum ab8505_regulator_reg { AB8505_NUM_REGULATOR_REGISTERS, }; -/* AB9540 registers */ -enum ab9540_regulator_reg { - AB9540_REGUREQUESTCTRL1, - AB9540_REGUREQUESTCTRL2, - AB9540_REGUREQUESTCTRL3, - AB9540_REGUREQUESTCTRL4, - AB9540_REGUSYSCLKREQ1HPVALID1, - AB9540_REGUSYSCLKREQ1HPVALID2, - AB9540_REGUHWHPREQ1VALID1, - AB9540_REGUHWHPREQ1VALID2, - AB9540_REGUHWHPREQ2VALID1, - AB9540_REGUHWHPREQ2VALID2, - AB9540_REGUSWHPREQVALID1, - AB9540_REGUSWHPREQVALID2, - AB9540_REGUSYSCLKREQVALID1, - AB9540_REGUSYSCLKREQVALID2, - AB9540_REGUVAUX4REQVALID, - AB9540_REGUMISC1, - AB9540_VAUDIOSUPPLY, - AB9540_REGUCTRL1VAMIC, - AB9540_VSMPS1REGU, - AB9540_VSMPS2REGU, - AB9540_VSMPS3REGU, /* NOTE! PRCMU register */ - AB9540_VPLLVANAREGU, - AB9540_EXTSUPPLYREGU, - AB9540_VAUX12REGU, - AB9540_VRF1VAUX3REGU, - AB9540_VSMPS1SEL1, - AB9540_VSMPS1SEL2, - AB9540_VSMPS1SEL3, - AB9540_VSMPS2SEL1, - AB9540_VSMPS2SEL2, - AB9540_VSMPS2SEL3, - AB9540_VSMPS3SEL1, /* NOTE! PRCMU register */ - AB9540_VSMPS3SEL2, /* NOTE! PRCMU register */ - AB9540_VAUX1SEL, - AB9540_VAUX2SEL, - AB9540_VRF1VAUX3SEL, - AB9540_REGUCTRL2SPARE, - AB9540_VAUX4REQCTRL, - AB9540_VAUX4REGU, - AB9540_VAUX4SEL, - AB9540_REGUCTRLDISCH, - AB9540_REGUCTRLDISCH2, - AB9540_REGUCTRLDISCH3, - AB9540_NUM_REGULATOR_REGISTERS, -}; - -/* AB8540 registers */ -enum ab8540_regulator_reg { - AB8540_REGUREQUESTCTRL1, - AB8540_REGUREQUESTCTRL2, - AB8540_REGUREQUESTCTRL3, - AB8540_REGUREQUESTCTRL4, - AB8540_REGUSYSCLKREQ1HPVALID1, - AB8540_REGUSYSCLKREQ1HPVALID2, - AB8540_REGUHWHPREQ1VALID1, - AB8540_REGUHWHPREQ1VALID2, - AB8540_REGUHWHPREQ2VALID1, - AB8540_REGUHWHPREQ2VALID2, - AB8540_REGUSWHPREQVALID1, - AB8540_REGUSWHPREQVALID2, - AB8540_REGUSYSCLKREQVALID1, - AB8540_REGUSYSCLKREQVALID2, - AB8540_REGUVAUX4REQVALID, - AB8540_REGUVAUX5REQVALID, - AB8540_REGUVAUX6REQVALID, - AB8540_REGUVCLKBREQVALID, - AB8540_REGUVRF1REQVALID, - AB8540_REGUMISC1, - AB8540_VAUDIOSUPPLY, - AB8540_REGUCTRL1VAMIC, - AB8540_VHSIC, - AB8540_VSDIO, - AB8540_VSMPS1REGU, - AB8540_VSMPS2REGU, - AB8540_VSMPS3REGU, - AB8540_VPLLVANAREGU, - AB8540_EXTSUPPLYREGU, - AB8540_VAUX12REGU, - AB8540_VRF1VAUX3REGU, - AB8540_VSMPS1SEL1, - AB8540_VSMPS1SEL2, - AB8540_VSMPS1SEL3, - AB8540_VSMPS2SEL1, - AB8540_VSMPS2SEL2, - AB8540_VSMPS2SEL3, - AB8540_VSMPS3SEL1, - AB8540_VSMPS3SEL2, - AB8540_VAUX1SEL, - AB8540_VAUX2SEL, - AB8540_VRF1VAUX3SEL, - AB8540_REGUCTRL2SPARE, - AB8540_VAUX4REQCTRL, - AB8540_VAUX4REGU, - AB8540_VAUX4SEL, - AB8540_VAUX5REQCTRL, - AB8540_VAUX5REGU, - AB8540_VAUX5SEL, - AB8540_VAUX6REQCTRL, - AB8540_VAUX6REGU, - AB8540_VAUX6SEL, - AB8540_VCLKBREQCTRL, - AB8540_VCLKBREGU, - AB8540_VCLKBSEL, - AB8540_VRF1REQCTRL, - AB8540_REGUCTRLDISCH, - AB8540_REGUCTRLDISCH2, - AB8540_REGUCTRLDISCH3, - AB8540_REGUCTRLDISCH4, - AB8540_VSIMSYSCLKCTRL, - AB8540_VANAVPLLSEL, - AB8540_NUM_REGULATOR_REGISTERS, -}; - /* AB8500 external regulators */ struct ab8500_ext_regulator_cfg { bool hwreq; /* requires hw mode or high power mode */ -- cgit v1.2.3 From 44773ba170a6f969620221a6d87d03feae5e464f Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 16 Apr 2018 10:22:01 -0700 Subject: ARM: OMAP2+: Drop unused pm-noop Looks like these functions don't do anything in the mainline kernel so we can just drop it. Note that we must now also remove ir-rx51 pdata as it relies on the dummy platform data that does not do anything. And ir-rx51 is calling a pdata callback that doesn't do anything without checking if it exists first. For configuring device specific minimal latencies, the interface to use is pm_qos_add_request(). For an example, see what was done in commit 9834ffd1ecc3 ("ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches"). I've added some comments to ir-rx51 so people using it can add pm_qos support and test it. Cc: Ivaylo Dimitrov Cc: Kevin Hilman Cc: Laurent Pinchart Cc: Tomi Valkeinen Acked-by: Mauro Carvalho Chehab Signed-off-by: Tony Lindgren --- include/linux/platform_data/media/ir-rx51.h | 9 --------- 1 file changed, 9 deletions(-) delete mode 100644 include/linux/platform_data/media/ir-rx51.h (limited to 'include/linux') diff --git a/include/linux/platform_data/media/ir-rx51.h b/include/linux/platform_data/media/ir-rx51.h deleted file mode 100644 index 9d127aa648e7..000000000000 --- a/include/linux/platform_data/media/ir-rx51.h +++ /dev/null @@ -1,9 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _IR_RX51_H -#define _IR_RX51_H - -struct ir_rx51_platform_data { - int(*set_max_mpu_wakeup_lat)(struct device *dev, long t); -}; - -#endif -- cgit v1.2.3 From 1e6c06a7e88c251d8a30271ad5206fbd967a4576 Mon Sep 17 00:00:00 2001 From: Baolin Wang Date: Sun, 8 Apr 2018 11:06:57 +0800 Subject: hwspinlock: Introduce one new mode for hwspinlock In some scenarios, user need do some time-consuming or sleepable operations under the hardware spinlock protection for synchronization between the multiple subsystems. For example, there is one PMIC efuse on Spreadtrum platform, which need to be accessed under one hardware lock. But during the hardware lock protection, the efuse operation is time-consuming to almost 5 ms, so we can not disable the interrupts or preemption so long in this case. Thus we can introduce one new mode to indicate that we just acquire the hardware lock and do not disable interrupts or preemption, meanwhile we should force user to protect the hardware lock with mutex or spinlock to avoid dead-lock. Signed-off-by: Baolin Wang Signed-off-by: Bjorn Andersson --- include/linux/hwspinlock.h | 58 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 58 insertions(+) (limited to 'include/linux') diff --git a/include/linux/hwspinlock.h b/include/linux/hwspinlock.h index 859d673d98c8..fe450ee58d55 100644 --- a/include/linux/hwspinlock.h +++ b/include/linux/hwspinlock.h @@ -24,6 +24,7 @@ /* hwspinlock mode argument */ #define HWLOCK_IRQSTATE 0x01 /* Disable interrupts, save state */ #define HWLOCK_IRQ 0x02 /* Disable interrupts, don't save state */ +#define HWLOCK_RAW 0x03 struct device; struct device_node; @@ -175,6 +176,25 @@ static inline int hwspin_trylock_irq(struct hwspinlock *hwlock) return __hwspin_trylock(hwlock, HWLOCK_IRQ, NULL); } +/** + * hwspin_trylock_raw() - attempt to lock a specific hwspinlock + * @hwlock: an hwspinlock which we want to trylock + * + * This function attempts to lock an hwspinlock, and will immediately fail + * if the hwspinlock is already taken. + * + * Caution: User must protect the routine of getting hardware lock with mutex + * or spinlock to avoid dead-lock, that will let user can do some time-consuming + * or sleepable operations under the hardware lock. + * + * Returns 0 if we successfully locked the hwspinlock, -EBUSY if + * the hwspinlock was already taken, and -EINVAL if @hwlock is invalid. + */ +static inline int hwspin_trylock_raw(struct hwspinlock *hwlock) +{ + return __hwspin_trylock(hwlock, HWLOCK_RAW, NULL); +} + /** * hwspin_trylock() - attempt to lock a specific hwspinlock * @hwlock: an hwspinlock which we want to trylock @@ -242,6 +262,29 @@ int hwspin_lock_timeout_irq(struct hwspinlock *hwlock, unsigned int to) return __hwspin_lock_timeout(hwlock, to, HWLOCK_IRQ, NULL); } +/** + * hwspin_lock_timeout_raw() - lock an hwspinlock with timeout limit + * @hwlock: the hwspinlock to be locked + * @to: timeout value in msecs + * + * This function locks the underlying @hwlock. If the @hwlock + * is already taken, the function will busy loop waiting for it to + * be released, but give up when @timeout msecs have elapsed. + * + * Caution: User must protect the routine of getting hardware lock with mutex + * or spinlock to avoid dead-lock, that will let user can do some time-consuming + * or sleepable operations under the hardware lock. + * + * Returns 0 when the @hwlock was successfully taken, and an appropriate + * error code otherwise (most notably an -ETIMEDOUT if the @hwlock is still + * busy after @timeout msecs). The function will never sleep. + */ +static inline +int hwspin_lock_timeout_raw(struct hwspinlock *hwlock, unsigned int to) +{ + return __hwspin_lock_timeout(hwlock, to, HWLOCK_RAW, NULL); +} + /** * hwspin_lock_timeout() - lock an hwspinlock with timeout limit * @hwlock: the hwspinlock to be locked @@ -301,6 +344,21 @@ static inline void hwspin_unlock_irq(struct hwspinlock *hwlock) __hwspin_unlock(hwlock, HWLOCK_IRQ, NULL); } +/** + * hwspin_unlock_raw() - unlock hwspinlock + * @hwlock: a previously-acquired hwspinlock which we want to unlock + * + * This function will unlock a specific hwspinlock. + * + * @hwlock must be already locked (e.g. by hwspin_trylock()) before calling + * this function: it is a bug to call unlock on a @hwlock that is already + * unlocked. + */ +static inline void hwspin_unlock_raw(struct hwspinlock *hwlock) +{ + __hwspin_unlock(hwlock, HWLOCK_RAW, NULL); +} + /** * hwspin_unlock() - unlock hwspinlock * @hwlock: a previously-acquired hwspinlock which we want to unlock -- cgit v1.2.3 From fe1bd78bf18a7cb3eb76fceea9193534fb6619e3 Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Mon, 2 Apr 2018 13:06:05 -0700 Subject: ARM: imx: Update spi_imx platform data to reflect current state The docs for the spi_imx platform data still refer to a -32 offset used to specify a native chip select. This was removed in commit 602c8f4485cd ("spi: imx: fix use of native chip-selects with devicetree") and no longer works as documented. Update documentation. The macro MXC_SPI_CS() is no longer is needed. If a board uses all native chip selects, then it's not necessary to specify a chip select array at all, as all native is the default (this is how device-tree configured SPI masters work too). Most of the spi-imx platform data users have their chip select arrays removed by this patch. This patch also fixes a bug in mx31moboard introduced in the '602 commit. When that board was updated in commit 901f26bce64a ("ARM: imx: set correct chip_select in platform setup") to reflect the SPI change, only SPI bus 2 was updated and SPI bus 1 was left with non-sequential chip selects. The mc13783 spi device on bus 1 had its chip select updated as if it were on bus 2. CC: Sascha Hauer CC: Fabio Estevam Acked-by: Greg Ungerer Reviewed-by: Oleksij Rempel Signed-off-by: Trent Piepho Signed-off-by: Shawn Guo --- include/linux/platform_data/spi-imx.h | 29 +++++++++++++++++------------ 1 file changed, 17 insertions(+), 12 deletions(-) (limited to 'include/linux') diff --git a/include/linux/platform_data/spi-imx.h b/include/linux/platform_data/spi-imx.h index 6f012fefa1a2..328f670d10bd 100644 --- a/include/linux/platform_data/spi-imx.h +++ b/include/linux/platform_data/spi-imx.h @@ -5,24 +5,29 @@ /* * struct spi_imx_master - device.platform_data for SPI controller devices. - * @chipselect: Array of chipselects for this master. Numbers >= 0 mean gpio - * pins, numbers < 0 mean internal CSPI chipselects according - * to MXC_SPI_CS(). Normally you want to use gpio based chip - * selects as the CSPI module tries to be intelligent about - * when to assert the chipselect: The CSPI module deasserts the - * chipselect once it runs out of input data. The other problem - * is that it is not possible to mix between high active and low - * active chipselects on one single bus using the internal - * chipselects. Unfortunately Freescale decided to put some + * @chipselect: Array of chipselects for this master or NULL. Numbers >= 0 + * mean GPIO pins, -ENOENT means internal CSPI chipselect + * matching the position in the array. E.g., if chipselect[1] = + * -ENOENT then a SPI slave using chip select 1 will use the + * native SS1 line of the CSPI. Omitting the array will use + * all native chip selects. + + * Normally you want to use gpio based chip selects as the CSPI + * module tries to be intelligent about when to assert the + * chipselect: The CSPI module deasserts the chipselect once it + * runs out of input data. The other problem is that it is not + * possible to mix between high active and low active chipselects + * on one single bus using the internal chipselects. + * Unfortunately, on some SoCs, Freescale decided to put some * chipselects on dedicated pins which are not usable as gpios, * so we have to support the internal chipselects. - * @num_chipselect: ARRAY_SIZE(chipselect) + * + * @num_chipselect: If @chipselect is specified, ARRAY_SIZE(chipselect), + * otherwise the number of native chip selects. */ struct spi_imx_master { int *chipselect; int num_chipselect; }; -#define MXC_SPI_CS(no) ((no) - 32) - #endif /* __MACH_SPI_H_*/ -- cgit v1.2.3 From b6240a4df0186c03e5ffff6f61570ed31a1a5172 Mon Sep 17 00:00:00 2001 From: Jason Yan Date: Mon, 26 Mar 2018 17:27:41 +0800 Subject: scsi: libsas: add transport class for ATA devices Now ata devices attached with sas controller do not have transport class, so that we can not see any information of these ata devices in /sys/class/ata_port(or ata_link or ata_device). Add transport class for the ata devices attached with sas controller. The /sys/class directory will show the infomation of the ata devices as follows: localhost:/sys/class # ls ata* ata_device: dev1.0 dev2.0 ata_link: link1 link2 ata_port: ata1 ata2 No functional change of the device scanning and io path. The ata transport class was deleted when destroying the sas devices. Signed-off-by: Jason Yan CC: Dan Williams CC: Tejun Heo Acked-by: Tejun Heo Signed-off-by: Martin K. Petersen --- include/linux/libata.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/libata.h b/include/linux/libata.h index 1795fecdea17..0619ebf4d475 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -1130,6 +1130,8 @@ extern void ata_sas_async_probe(struct ata_port *ap); extern int ata_sas_sync_probe(struct ata_port *ap); extern int ata_sas_port_init(struct ata_port *); extern int ata_sas_port_start(struct ata_port *ap); +extern int ata_sas_tport_add(struct device *parent, struct ata_port *ap); +extern void ata_sas_tport_delete(struct ata_port *ap); extern void ata_sas_port_stop(struct ata_port *ap); extern int ata_sas_slave_configure(struct scsi_device *, struct ata_port *); extern int ata_sas_queuecmd(struct scsi_cmnd *cmd, struct ata_port *ap); -- cgit v1.2.3 From 63273cb40101b6f303a5493f1bdf629d4ab3746b Mon Sep 17 00:00:00 2001 From: Long Li Date: Tue, 27 Mar 2018 17:48:38 -0700 Subject: scsi: vmbus: Add function to report available ring buffer to write in total ring size percentage Netvsc has a function to calculate how much ring buffer in percentage is available to write. This function is also useful for storvsc and other vmbus devices. Define a similar function in vmbus to be used by other vmbus devices. Signed-off-by: Long Li Acked-by: David S. Miller Signed-off-by: Martin K. Petersen --- include/linux/hyperv.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include/linux') diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index 192ed8fbc403..9ac954ee577e 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -35,6 +35,7 @@ #include #include #include +#include #define MAX_PAGE_BUFFER_COUNT 32 #define MAX_MULTIPAGE_BUFFER_COUNT 32 /* 128K */ @@ -120,6 +121,7 @@ struct hv_ring_buffer { struct hv_ring_buffer_info { struct hv_ring_buffer *ring_buffer; u32 ring_size; /* Include the shared header */ + struct reciprocal_value ring_size_div10_reciprocal; spinlock_t ring_lock; u32 ring_datasize; /* < ring_size */ @@ -154,6 +156,16 @@ static inline u32 hv_get_bytes_to_write(const struct hv_ring_buffer_info *rbi) return write; } +static inline u32 hv_get_avail_to_write_percent( + const struct hv_ring_buffer_info *rbi) +{ + u32 avail_write = hv_get_bytes_to_write(rbi); + + return reciprocal_divide( + (avail_write << 3) + (avail_write << 1), + rbi->ring_size_div10_reciprocal); +} + /* * VMBUS version is 32 bit entity broken up into * two 16 bit quantities: major_number. minor_number. -- cgit v1.2.3 From a597043304a13defc646bb1f16514e4903b36c3c Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 10 Apr 2018 15:06:05 +0200 Subject: clk: Remove clk_init_cb typedef Since commit c08ee14cc6634457 ("clk: ti: change clock init to use generic of_clk_init"), there is only a single (private) user left of the (public) clk_init_cb typedef. Hence expand its single user in the core clock code, and remove the typedef. Signed-off-by: Geert Uytterhoeven Signed-off-by: Michael Turquette Link: lkml.kernel.org/r/1523365565-17124-1-git-send-email-geert+renesas@glider.be --- include/linux/clk-provider.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 210a890008f9..410a8627b8c0 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -802,8 +802,6 @@ unsigned long clk_hw_round_rate(struct clk_hw *hw, unsigned long rate); struct of_device_id; -typedef void (*of_clk_init_cb_t)(struct device_node *); - struct clk_onecell_data { struct clk **clks; unsigned int clk_num; -- cgit v1.2.3 From 669ca0303ac93adba0e046d414165250861efdb7 Mon Sep 17 00:00:00 2001 From: ryang Date: Thu, 19 Apr 2018 12:18:50 -0400 Subject: regulator: tps6586x: Add support for TPS658624 This version is exists in the Samsung Galaxy Tab 10.1 which is based on the Nvidia Tegra 2 board. The TPS658624 has the same SM2 voltage table as TPS658623. Signed-off-by: ryang Acked-by: Lee Jones Signed-off-by: Mark Brown --- include/linux/mfd/tps6586x.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mfd/tps6586x.h b/include/linux/mfd/tps6586x.h index 2fe68e481230..b19c2801a30e 100644 --- a/include/linux/mfd/tps6586x.h +++ b/include/linux/mfd/tps6586x.h @@ -18,6 +18,7 @@ #define TPS658621A 0x15 #define TPS658621CD 0x2c #define TPS658623 0x1b +#define TPS658624 0x0a #define TPS658640 0x01 #define TPS658640v2 0x02 #define TPS658643 0x03 -- cgit v1.2.3 From 02f3703934a42417021405ef336fe45add13c3d1 Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Wed, 18 Apr 2018 08:54:18 -0700 Subject: regulator: Don't return or expect -errno from of_map_mode() In of_get_regulation_constraints() we were taking the result of of_map_mode() (an unsigned int) and assigning it to an int. We were then checking whether this value was -EINVAL. Some implementers of of_map_mode() were returning -EINVAL (even though the return type of their function needed to be unsigned int) because they needed to signal an error back to of_get_regulation_constraints(). In general in the regulator framework the mode is always referred to as an unsigned int. While we could fix this to be a signed int (the highest value we store in there right now is 0x8), it's actually pretty clean to just define the regulator mode 0x0 (the lack of any bits set) as an invalid mode. Let's do that. Fixes: 5e5e3a42c653 ("regulator: of: Add support for parsing initial and suspend modes") Suggested-by: Javier Martinez Canillas Signed-off-by: Douglas Anderson Reviewed-by: Javier Martinez Canillas Signed-off-by: Mark Brown --- include/linux/regulator/consumer.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index df176d7c2b87..25602afd4844 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -80,6 +80,7 @@ struct regmap; * These modes can be OR'ed together to make up a mask of valid register modes. */ +#define REGULATOR_MODE_INVALID 0x0 #define REGULATOR_MODE_FAST 0x1 #define REGULATOR_MODE_NORMAL 0x2 #define REGULATOR_MODE_IDLE 0x4 -- cgit v1.2.3 From 8af70cd2ca508061088d5059ba8a8218aca7ddf1 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Fri, 20 Apr 2018 10:14:27 -0700 Subject: memory: aemif: add support for board files Currently aemif is supported in two places separately. By the platform driver in drivers/memory and by a hand crafted driver in mach-davinci. We want to drop the latter but also keep the legacy mode. Add support for board files to the aemif driver. The new structure in platform data currently only contains the chip select number, since currently existing users don't require anything else, but it can be extended in the future. While extending the platform data struct, add kernel docs describing its members. Signed-off-by: Bartosz Golaszewski Signed-off-by: Santosh Shilimkar --- include/linux/platform_data/ti-aemif.h | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'include/linux') diff --git a/include/linux/platform_data/ti-aemif.h b/include/linux/platform_data/ti-aemif.h index ac72e115093c..e6407bafcbf8 100644 --- a/include/linux/platform_data/ti-aemif.h +++ b/include/linux/platform_data/ti-aemif.h @@ -16,8 +16,33 @@ #include +/** + * struct aemif_abus_data - Async bus configuration parameters. + * + * @cs - Chip-select number. + */ +struct aemif_abus_data { + u32 cs; +}; + +/** + * struct aemif_platform_data - Data to set up the TI aemif driver. + * + * @dev_lookup: of_dev_auxdata passed to of_platform_populate() for aemif + * subdevices. + * @cs_offset: Lowest allowed chip-select number. + * @abus_data: Array of async bus configuration entries. + * @num_abus_data: Number of abus entries. + * @sub_devices: Array of platform subdevices. + * @num_sub_devices: Number of subdevices. + */ struct aemif_platform_data { struct of_dev_auxdata *dev_lookup; + u32 cs_offset; + struct aemif_abus_data *abus_data; + size_t num_abus_data; + struct platform_device *sub_devices; + size_t num_sub_devices; }; #endif /* __TI_DAVINCI_AEMIF_DATA_H__ */ -- cgit v1.2.3 From dbef91ec5482239055dd2db8ec656fc13d382add Mon Sep 17 00:00:00 2001 From: Martin Wilck Date: Wed, 18 Apr 2018 01:35:06 +0200 Subject: scsi: ilog2: create truly constant version for sparse Sparse emits errors about ilog2() in array indices because of the use of __ilog2_32() and __ilog2_64(), rightly so (https://www.spinics.net/lists/linux-sparse/msg03471.html). Create a const_ilog2() variant that works with sparse for this scenario. (Note: checkpatch.pl complains about missing parentheses, but that appears to be a false positive. I can get rid of the warning simply by inserting whitespace, making checkpatch "see" the whole macro). Signed-off-by: Martin Wilck Signed-off-by: Martin K. Petersen --- include/linux/log2.h | 35 ++++++++++++++++++++++++----------- 1 file changed, 24 insertions(+), 11 deletions(-) (limited to 'include/linux') diff --git a/include/linux/log2.h b/include/linux/log2.h index 41a1ae010993..2af7f77866d0 100644 --- a/include/linux/log2.h +++ b/include/linux/log2.h @@ -72,16 +72,13 @@ unsigned long __rounddown_pow_of_two(unsigned long n) } /** - * ilog2 - log base 2 of 32-bit or a 64-bit unsigned value + * const_ilog2 - log base 2 of 32-bit or a 64-bit constant unsigned value * @n: parameter * - * constant-capable log of base 2 calculation - * - this can be used to initialise global variables from constant data, hence - * the massive ternary operator construction - * - * selects the appropriately-sized optimised version depending on sizeof(n) + * Use this where sparse expects a true constant expression, e.g. for array + * indices. */ -#define ilog2(n) \ +#define const_ilog2(n) \ ( \ __builtin_constant_p(n) ? ( \ (n) < 2 ? 0 : \ @@ -147,10 +144,26 @@ unsigned long __rounddown_pow_of_two(unsigned long n) (n) & (1ULL << 4) ? 4 : \ (n) & (1ULL << 3) ? 3 : \ (n) & (1ULL << 2) ? 2 : \ - 1 ) : \ - (sizeof(n) <= 4) ? \ - __ilog2_u32(n) : \ - __ilog2_u64(n) \ + 1) : \ + -1) + +/** + * ilog2 - log base 2 of 32-bit or a 64-bit unsigned value + * @n: parameter + * + * constant-capable log of base 2 calculation + * - this can be used to initialise global variables from constant data, hence + * the massive ternary operator construction + * + * selects the appropriately-sized optimised version depending on sizeof(n) + */ +#define ilog2(n) \ +( \ + __builtin_constant_p(n) ? \ + const_ilog2(n) : \ + (sizeof(n) <= 4) ? \ + __ilog2_u32(n) : \ + __ilog2_u64(n) \ ) /** -- cgit v1.2.3 From f134fbbb4ff813dd227c9ce40b5c0b2078a77b07 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Sat, 21 Apr 2018 08:54:40 +1000 Subject: mtd: spi-nor: clear Winbond Extended Address Reg on switch to 3-byte addressing. Winbond spi-nor flash 32MB and larger have an 'Extended Address Register' as one option for addressing beyond 16MB (Macronix has the same concept, Spansion has EXTADD bits in the Bank Address Register). According to section 8.2.7 Write Extended Address Register (C5h) of the Winbond W25Q256FV data sheet (256M-BIT SPI flash) The Extended Address Register is only effective when the device is in the 3-Byte Address Mode. When the device operates in the 4-Byte Address Mode (ADS=1), any command with address input of A31-A24 will replace the Extended Address Register values. It is recommended to check and update the Extended Address Register if necessary when the device is switched from 4-Byte to 3-Byte Address Mode. So the documentation suggests clearing the EAR after switching to 3-byte mode. Experimentation shows that the EAR is *always* one after the switch to 3-byte mode, so clearing the EAR is mandatory at shutdown for a subsequent 3-byte-addressed reboot to work. Note that some SOCs (e.g. MT7621) do not assert a reset line at normal reboot, so we cannot rely on hardware reset. The MT7621 does assert a reset line at watchdog-reset. Acked-by: Marek Vasut Signed-off-by: NeilBrown Signed-off-by: Boris Brezillon --- include/linux/mtd/spi-nor.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index de36969eb359..e60da0d34cc1 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -62,6 +62,8 @@ #define SPINOR_OP_RDCR 0x35 /* Read configuration register */ #define SPINOR_OP_RDFSR 0x70 /* Read flag status register */ #define SPINOR_OP_CLFSR 0x50 /* Clear flag status register */ +#define SPINOR_OP_RDEAR 0xc8 /* Read Extended Address Register */ +#define SPINOR_OP_WREAR 0xc5 /* Write Extended Address Register */ /* 4-byte address opcodes - used on Spansion and some Macronix flashes. */ #define SPINOR_OP_READ_4B 0x13 /* Read data bytes (low frequency) */ -- cgit v1.2.3 From 05e6557b8ed833546ee2b66ce6b58fecf09f439e Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 29 Mar 2018 15:26:48 +1100 Subject: staging: lustre: add container_of_safe() Luster has a container_of0() function which is similar to container_of() but passes an IS_ERR_OR_NULL() pointer through unchanged. This could be generally useful: bcache at last has a similar function. Naming is hard, but the precedent set by hlist_entry_safe() suggests a _safe suffix might be most consistent. So add container_of_safe() to kernel.h, and replace all occurrences of container_of0() with one of - list_first_entry, list_next_entry, when that is a better fit, - container_of(), when the pointer is used as a validpointer in surrounding code, - container_of_safe() when there is no obviously better alternative. Signed-off-by: NeilBrown Reviewed-by: James Simmons Signed-off-by: Greg Kroah-Hartman --- include/linux/kernel.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'include/linux') diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 6a1eb0b0aad9..58d6645b1425 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -964,6 +964,22 @@ static inline void ftrace_dump(enum ftrace_dump_mode oops_dump_mode) { } "pointer type mismatch in container_of()"); \ ((type *)(__mptr - offsetof(type, member))); }) +/** + * container_of_safe - cast a member of a structure out to the containing structure + * @ptr: the pointer to the member. + * @type: the type of the container struct this is embedded in. + * @member: the name of the member within the struct. + * + * If IS_ERR_OR_NULL(ptr), ptr is returned unchanged. + */ +#define container_of_safe(ptr, type, member) ({ \ + void *__mptr = (void *)(ptr); \ + BUILD_BUG_ON_MSG(!__same_type(*(ptr), ((type *)0)->member) && \ + !__same_type(*(ptr), void), \ + "pointer type mismatch in container_of()"); \ + IS_ERR_OR_NULL(ptr) ? ERR_CAST(ptr) : \ + ((type *)(__mptr - offsetof(type, member))); }) + /* Rebuild everything on CONFIG_FTRACE_MCOUNT_RECORD */ #ifdef CONFIG_FTRACE_MCOUNT_RECORD # define REBUILD_DUE_TO_FTRACE_MCOUNT_RECORD -- cgit v1.2.3 From 2ff0dab80a8999e99a93fd70f8d701ec3deab207 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 18 Apr 2018 15:18:02 +0200 Subject: mfd: bd9571mwv: Add DDR Backup Power register bit definitions Add definitions for the KEEPON_* bits in the "BKUP Mode Cnt" register, which control the DDR rails to be kept powered when backup mode is enabled. Signed-off-by: Geert Uytterhoeven Acked-by: Lee Jones Signed-off-by: Mark Brown --- include/linux/mfd/bd9571mwv.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/bd9571mwv.h b/include/linux/mfd/bd9571mwv.h index f0708ba4cbba..eb05569f752b 100644 --- a/include/linux/mfd/bd9571mwv.h +++ b/include/linux/mfd/bd9571mwv.h @@ -33,6 +33,11 @@ #define BD9571MWV_I2C_MD2_E1_BIT_2 0x12 #define BD9571MWV_BKUP_MODE_CNT 0x20 +#define BD9571MWV_BKUP_MODE_CNT_KEEPON_MASK GENMASK(3, 0) +#define BD9571MWV_BKUP_MODE_CNT_KEEPON_DDR0 BIT(0) +#define BD9571MWV_BKUP_MODE_CNT_KEEPON_DDR1 BIT(1) +#define BD9571MWV_BKUP_MODE_CNT_KEEPON_DDR0C BIT(2) +#define BD9571MWV_BKUP_MODE_CNT_KEEPON_DDR1C BIT(3) #define BD9571MWV_BKUP_MODE_STATUS 0x21 #define BD9571MWV_BKUP_RECOVERY_CNT 0x22 #define BD9571MWV_BKUP_CTRL_TIM_CNT 0x23 -- cgit v1.2.3 From eddac5af06546d2e7a0730e3dc02dde3dc91098a Mon Sep 17 00:00:00 2001 From: Karthikeyan Ramasubramanian Date: Fri, 30 Mar 2018 11:08:17 -0600 Subject: soc: qcom: Add GENI based QUP Wrapper driver This driver manages the Generic Interface (GENI) firmware based Qualcomm Universal Peripheral (QUP) Wrapper. GENI based QUP is the next generation programmable module composed of multiple Serial Engines (SE) and supports a wide range of serial interfaces like UART, SPI, I2C, I3C, etc. This driver also enables managing the serial interface independent aspects of Serial Engines. Signed-off-by: Karthikeyan Ramasubramanian Signed-off-by: Sagar Dharia Signed-off-by: Girish Mahadevan Reviewed-by: Evan Green Signed-off-by: Andy Gross --- include/linux/qcom-geni-se.h | 425 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 425 insertions(+) create mode 100644 include/linux/qcom-geni-se.h (limited to 'include/linux') diff --git a/include/linux/qcom-geni-se.h b/include/linux/qcom-geni-se.h new file mode 100644 index 000000000000..5d6144977828 --- /dev/null +++ b/include/linux/qcom-geni-se.h @@ -0,0 +1,425 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Copyright (c) 2017-2018, The Linux Foundation. All rights reserved. + */ + +#ifndef _LINUX_QCOM_GENI_SE +#define _LINUX_QCOM_GENI_SE + +/* Transfer mode supported by GENI Serial Engines */ +enum geni_se_xfer_mode { + GENI_SE_INVALID, + GENI_SE_FIFO, + GENI_SE_DMA, +}; + +/* Protocols supported by GENI Serial Engines */ +enum geni_se_protocol_type { + GENI_SE_NONE, + GENI_SE_SPI, + GENI_SE_UART, + GENI_SE_I2C, + GENI_SE_I3C, +}; + +struct geni_wrapper; +struct clk; + +/** + * struct geni_se - GENI Serial Engine + * @base: Base Address of the Serial Engine's register block + * @dev: Pointer to the Serial Engine device + * @wrapper: Pointer to the parent QUP Wrapper core + * @clk: Handle to the core serial engine clock + * @num_clk_levels: Number of valid clock levels in clk_perf_tbl + * @clk_perf_tbl: Table of clock frequency input to serial engine clock + */ +struct geni_se { + void __iomem *base; + struct device *dev; + struct geni_wrapper *wrapper; + struct clk *clk; + unsigned int num_clk_levels; + unsigned long *clk_perf_tbl; +}; + +/* Common SE registers */ +#define GENI_FORCE_DEFAULT_REG 0x20 +#define SE_GENI_STATUS 0x40 +#define GENI_SER_M_CLK_CFG 0x48 +#define GENI_SER_S_CLK_CFG 0x4c +#define GENI_FW_REVISION_RO 0x68 +#define SE_GENI_CLK_SEL 0x7c +#define SE_GENI_DMA_MODE_EN 0x258 +#define SE_GENI_M_CMD0 0x600 +#define SE_GENI_M_CMD_CTRL_REG 0x604 +#define SE_GENI_M_IRQ_STATUS 0x610 +#define SE_GENI_M_IRQ_EN 0x614 +#define SE_GENI_M_IRQ_CLEAR 0x618 +#define SE_GENI_S_CMD0 0x630 +#define SE_GENI_S_CMD_CTRL_REG 0x634 +#define SE_GENI_S_IRQ_STATUS 0x640 +#define SE_GENI_S_IRQ_EN 0x644 +#define SE_GENI_S_IRQ_CLEAR 0x648 +#define SE_GENI_TX_FIFOn 0x700 +#define SE_GENI_RX_FIFOn 0x780 +#define SE_GENI_TX_FIFO_STATUS 0x800 +#define SE_GENI_RX_FIFO_STATUS 0x804 +#define SE_GENI_TX_WATERMARK_REG 0x80c +#define SE_GENI_RX_WATERMARK_REG 0x810 +#define SE_GENI_RX_RFR_WATERMARK_REG 0x814 +#define SE_GENI_IOS 0x908 +#define SE_DMA_TX_IRQ_STAT 0xc40 +#define SE_DMA_TX_IRQ_CLR 0xc44 +#define SE_DMA_TX_FSM_RST 0xc58 +#define SE_DMA_RX_IRQ_STAT 0xd40 +#define SE_DMA_RX_IRQ_CLR 0xd44 +#define SE_DMA_RX_FSM_RST 0xd58 +#define SE_HW_PARAM_0 0xe24 +#define SE_HW_PARAM_1 0xe28 + +/* GENI_FORCE_DEFAULT_REG fields */ +#define FORCE_DEFAULT BIT(0) + +/* GENI_STATUS fields */ +#define M_GENI_CMD_ACTIVE BIT(0) +#define S_GENI_CMD_ACTIVE BIT(12) + +/* GENI_SER_M_CLK_CFG/GENI_SER_S_CLK_CFG */ +#define SER_CLK_EN BIT(0) +#define CLK_DIV_MSK GENMASK(15, 4) +#define CLK_DIV_SHFT 4 + +/* GENI_FW_REVISION_RO fields */ +#define FW_REV_PROTOCOL_MSK GENMASK(15, 8) +#define FW_REV_PROTOCOL_SHFT 8 + +/* GENI_CLK_SEL fields */ +#define CLK_SEL_MSK GENMASK(2, 0) + +/* SE_GENI_DMA_MODE_EN */ +#define GENI_DMA_MODE_EN BIT(0) + +/* GENI_M_CMD0 fields */ +#define M_OPCODE_MSK GENMASK(31, 27) +#define M_OPCODE_SHFT 27 +#define M_PARAMS_MSK GENMASK(26, 0) + +/* GENI_M_CMD_CTRL_REG */ +#define M_GENI_CMD_CANCEL BIT(2) +#define M_GENI_CMD_ABORT BIT(1) +#define M_GENI_DISABLE BIT(0) + +/* GENI_S_CMD0 fields */ +#define S_OPCODE_MSK GENMASK(31, 27) +#define S_OPCODE_SHFT 27 +#define S_PARAMS_MSK GENMASK(26, 0) + +/* GENI_S_CMD_CTRL_REG */ +#define S_GENI_CMD_CANCEL BIT(2) +#define S_GENI_CMD_ABORT BIT(1) +#define S_GENI_DISABLE BIT(0) + +/* GENI_M_IRQ_EN fields */ +#define M_CMD_DONE_EN BIT(0) +#define M_CMD_OVERRUN_EN BIT(1) +#define M_ILLEGAL_CMD_EN BIT(2) +#define M_CMD_FAILURE_EN BIT(3) +#define M_CMD_CANCEL_EN BIT(4) +#define M_CMD_ABORT_EN BIT(5) +#define M_TIMESTAMP_EN BIT(6) +#define M_RX_IRQ_EN BIT(7) +#define M_GP_SYNC_IRQ_0_EN BIT(8) +#define M_GP_IRQ_0_EN BIT(9) +#define M_GP_IRQ_1_EN BIT(10) +#define M_GP_IRQ_2_EN BIT(11) +#define M_GP_IRQ_3_EN BIT(12) +#define M_GP_IRQ_4_EN BIT(13) +#define M_GP_IRQ_5_EN BIT(14) +#define M_IO_DATA_DEASSERT_EN BIT(22) +#define M_IO_DATA_ASSERT_EN BIT(23) +#define M_RX_FIFO_RD_ERR_EN BIT(24) +#define M_RX_FIFO_WR_ERR_EN BIT(25) +#define M_RX_FIFO_WATERMARK_EN BIT(26) +#define M_RX_FIFO_LAST_EN BIT(27) +#define M_TX_FIFO_RD_ERR_EN BIT(28) +#define M_TX_FIFO_WR_ERR_EN BIT(29) +#define M_TX_FIFO_WATERMARK_EN BIT(30) +#define M_SEC_IRQ_EN BIT(31) +#define M_COMMON_GENI_M_IRQ_EN (GENMASK(6, 1) | \ + M_IO_DATA_DEASSERT_EN | \ + M_IO_DATA_ASSERT_EN | M_RX_FIFO_RD_ERR_EN | \ + M_RX_FIFO_WR_ERR_EN | M_TX_FIFO_RD_ERR_EN | \ + M_TX_FIFO_WR_ERR_EN) + +/* GENI_S_IRQ_EN fields */ +#define S_CMD_DONE_EN BIT(0) +#define S_CMD_OVERRUN_EN BIT(1) +#define S_ILLEGAL_CMD_EN BIT(2) +#define S_CMD_FAILURE_EN BIT(3) +#define S_CMD_CANCEL_EN BIT(4) +#define S_CMD_ABORT_EN BIT(5) +#define S_GP_SYNC_IRQ_0_EN BIT(8) +#define S_GP_IRQ_0_EN BIT(9) +#define S_GP_IRQ_1_EN BIT(10) +#define S_GP_IRQ_2_EN BIT(11) +#define S_GP_IRQ_3_EN BIT(12) +#define S_GP_IRQ_4_EN BIT(13) +#define S_GP_IRQ_5_EN BIT(14) +#define S_IO_DATA_DEASSERT_EN BIT(22) +#define S_IO_DATA_ASSERT_EN BIT(23) +#define S_RX_FIFO_RD_ERR_EN BIT(24) +#define S_RX_FIFO_WR_ERR_EN BIT(25) +#define S_RX_FIFO_WATERMARK_EN BIT(26) +#define S_RX_FIFO_LAST_EN BIT(27) +#define S_COMMON_GENI_S_IRQ_EN (GENMASK(5, 1) | GENMASK(13, 9) | \ + S_RX_FIFO_RD_ERR_EN | S_RX_FIFO_WR_ERR_EN) + +/* GENI_/TX/RX/RX_RFR/_WATERMARK_REG fields */ +#define WATERMARK_MSK GENMASK(5, 0) + +/* GENI_TX_FIFO_STATUS fields */ +#define TX_FIFO_WC GENMASK(27, 0) + +/* GENI_RX_FIFO_STATUS fields */ +#define RX_LAST BIT(31) +#define RX_LAST_BYTE_VALID_MSK GENMASK(30, 28) +#define RX_LAST_BYTE_VALID_SHFT 28 +#define RX_FIFO_WC_MSK GENMASK(24, 0) + +/* SE_GENI_IOS fields */ +#define IO2_DATA_IN BIT(1) +#define RX_DATA_IN BIT(0) + +/* SE_DMA_TX_IRQ_STAT Register fields */ +#define TX_DMA_DONE BIT(0) +#define TX_EOT BIT(1) +#define TX_SBE BIT(2) +#define TX_RESET_DONE BIT(3) + +/* SE_DMA_RX_IRQ_STAT Register fields */ +#define RX_DMA_DONE BIT(0) +#define RX_EOT BIT(1) +#define RX_SBE BIT(2) +#define RX_RESET_DONE BIT(3) +#define RX_FLUSH_DONE BIT(4) +#define RX_GENI_GP_IRQ GENMASK(10, 5) +#define RX_GENI_CANCEL_IRQ BIT(11) +#define RX_GENI_GP_IRQ_EXT GENMASK(13, 12) + +/* SE_HW_PARAM_0 fields */ +#define TX_FIFO_WIDTH_MSK GENMASK(29, 24) +#define TX_FIFO_WIDTH_SHFT 24 +#define TX_FIFO_DEPTH_MSK GENMASK(21, 16) +#define TX_FIFO_DEPTH_SHFT 16 + +/* SE_HW_PARAM_1 fields */ +#define RX_FIFO_WIDTH_MSK GENMASK(29, 24) +#define RX_FIFO_WIDTH_SHFT 24 +#define RX_FIFO_DEPTH_MSK GENMASK(21, 16) +#define RX_FIFO_DEPTH_SHFT 16 + +#define HW_VER_MAJOR_MASK GENMASK(31, 28) +#define HW_VER_MAJOR_SHFT 28 +#define HW_VER_MINOR_MASK GENMASK(27, 16) +#define HW_VER_MINOR_SHFT 16 +#define HW_VER_STEP_MASK GENMASK(15, 0) + +#if IS_ENABLED(CONFIG_QCOM_GENI_SE) + +u32 geni_se_get_qup_hw_version(struct geni_se *se); + +#define geni_se_get_wrapper_version(se, major, minor, step) do { \ + u32 ver; \ +\ + ver = geni_se_get_qup_hw_version(se); \ + major = (ver & HW_VER_MAJOR_MASK) >> HW_VER_MAJOR_SHFT; \ + minor = (ver & HW_VER_MINOR_MASK) >> HW_VER_MINOR_SHFT; \ + step = version & HW_VER_STEP_MASK; \ +} while (0) + +/** + * geni_se_read_proto() - Read the protocol configured for a serial engine + * @se: Pointer to the concerned serial engine. + * + * Return: Protocol value as configured in the serial engine. + */ +static inline u32 geni_se_read_proto(struct geni_se *se) +{ + u32 val; + + val = readl_relaxed(se->base + GENI_FW_REVISION_RO); + + return (val & FW_REV_PROTOCOL_MSK) >> FW_REV_PROTOCOL_SHFT; +} + +/** + * geni_se_setup_m_cmd() - Setup the primary sequencer + * @se: Pointer to the concerned serial engine. + * @cmd: Command/Operation to setup in the primary sequencer. + * @params: Parameter for the sequencer command. + * + * This function is used to configure the primary sequencer with the + * command and its associated parameters. + */ +static inline void geni_se_setup_m_cmd(struct geni_se *se, u32 cmd, u32 params) +{ + u32 m_cmd; + + m_cmd = (cmd << M_OPCODE_SHFT) | (params & M_PARAMS_MSK); + writel_relaxed(m_cmd, se->base + SE_GENI_M_CMD0); +} + +/** + * geni_se_setup_s_cmd() - Setup the secondary sequencer + * @se: Pointer to the concerned serial engine. + * @cmd: Command/Operation to setup in the secondary sequencer. + * @params: Parameter for the sequencer command. + * + * This function is used to configure the secondary sequencer with the + * command and its associated parameters. + */ +static inline void geni_se_setup_s_cmd(struct geni_se *se, u32 cmd, u32 params) +{ + u32 s_cmd; + + s_cmd = readl_relaxed(se->base + SE_GENI_S_CMD0); + s_cmd &= ~(S_OPCODE_MSK | S_PARAMS_MSK); + s_cmd |= (cmd << S_OPCODE_SHFT); + s_cmd |= (params & S_PARAMS_MSK); + writel_relaxed(s_cmd, se->base + SE_GENI_S_CMD0); +} + +/** + * geni_se_cancel_m_cmd() - Cancel the command configured in the primary + * sequencer + * @se: Pointer to the concerned serial engine. + * + * This function is used to cancel the currently configured command in the + * primary sequencer. + */ +static inline void geni_se_cancel_m_cmd(struct geni_se *se) +{ + writel_relaxed(M_GENI_CMD_CANCEL, se->base + SE_GENI_M_CMD_CTRL_REG); +} + +/** + * geni_se_cancel_s_cmd() - Cancel the command configured in the secondary + * sequencer + * @se: Pointer to the concerned serial engine. + * + * This function is used to cancel the currently configured command in the + * secondary sequencer. + */ +static inline void geni_se_cancel_s_cmd(struct geni_se *se) +{ + writel_relaxed(S_GENI_CMD_CANCEL, se->base + SE_GENI_S_CMD_CTRL_REG); +} + +/** + * geni_se_abort_m_cmd() - Abort the command configured in the primary sequencer + * @se: Pointer to the concerned serial engine. + * + * This function is used to force abort the currently configured command in the + * primary sequencer. + */ +static inline void geni_se_abort_m_cmd(struct geni_se *se) +{ + writel_relaxed(M_GENI_CMD_ABORT, se->base + SE_GENI_M_CMD_CTRL_REG); +} + +/** + * geni_se_abort_s_cmd() - Abort the command configured in the secondary + * sequencer + * @se: Pointer to the concerned serial engine. + * + * This function is used to force abort the currently configured command in the + * secondary sequencer. + */ +static inline void geni_se_abort_s_cmd(struct geni_se *se) +{ + writel_relaxed(S_GENI_CMD_ABORT, se->base + SE_GENI_S_CMD_CTRL_REG); +} + +/** + * geni_se_get_tx_fifo_depth() - Get the TX fifo depth of the serial engine + * @se: Pointer to the concerned serial engine. + * + * This function is used to get the depth i.e. number of elements in the + * TX fifo of the serial engine. + * + * Return: TX fifo depth in units of FIFO words. + */ +static inline u32 geni_se_get_tx_fifo_depth(struct geni_se *se) +{ + u32 val; + + val = readl_relaxed(se->base + SE_HW_PARAM_0); + + return (val & TX_FIFO_DEPTH_MSK) >> TX_FIFO_DEPTH_SHFT; +} + +/** + * geni_se_get_tx_fifo_width() - Get the TX fifo width of the serial engine + * @se: Pointer to the concerned serial engine. + * + * This function is used to get the width i.e. word size per element in the + * TX fifo of the serial engine. + * + * Return: TX fifo width in bits + */ +static inline u32 geni_se_get_tx_fifo_width(struct geni_se *se) +{ + u32 val; + + val = readl_relaxed(se->base + SE_HW_PARAM_0); + + return (val & TX_FIFO_WIDTH_MSK) >> TX_FIFO_WIDTH_SHFT; +} + +/** + * geni_se_get_rx_fifo_depth() - Get the RX fifo depth of the serial engine + * @se: Pointer to the concerned serial engine. + * + * This function is used to get the depth i.e. number of elements in the + * RX fifo of the serial engine. + * + * Return: RX fifo depth in units of FIFO words + */ +static inline u32 geni_se_get_rx_fifo_depth(struct geni_se *se) +{ + u32 val; + + val = readl_relaxed(se->base + SE_HW_PARAM_1); + + return (val & RX_FIFO_DEPTH_MSK) >> RX_FIFO_DEPTH_SHFT; +} + +void geni_se_init(struct geni_se *se, u32 rx_wm, u32 rx_rfr); + +void geni_se_select_mode(struct geni_se *se, enum geni_se_xfer_mode mode); + +void geni_se_config_packing(struct geni_se *se, int bpw, int pack_words, + bool msb_to_lsb, bool tx_cfg, bool rx_cfg); + +int geni_se_resources_off(struct geni_se *se); + +int geni_se_resources_on(struct geni_se *se); + +int geni_se_clk_tbl_get(struct geni_se *se, unsigned long **tbl); + +int geni_se_clk_freq_match(struct geni_se *se, unsigned long req_freq, + unsigned int *index, unsigned long *res_freq, + bool exact); + +int geni_se_tx_dma_prep(struct geni_se *se, void *buf, size_t len, + dma_addr_t *iova); + +int geni_se_rx_dma_prep(struct geni_se *se, void *buf, size_t len, + dma_addr_t *iova); + +void geni_se_tx_dma_unprep(struct geni_se *se, dma_addr_t iova, size_t len); + +void geni_se_rx_dma_unprep(struct geni_se *se, dma_addr_t iova, size_t len); +#endif +#endif -- cgit v1.2.3 From 5ef6a16033b47afbc578c7ef8754da5ae7b198d7 Mon Sep 17 00:00:00 2001 From: "Andrew F. Davis" Date: Sat, 21 Apr 2018 18:12:49 -0500 Subject: power: supply: bq27xxx: Add support for BQ27426 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This device is software similar to the BQ27426 except it has different data memory offsets. Add support here. Signed-off-by: Andrew F. Davis Acked-by: Pali Rohár Signed-off-by: Sebastian Reichel --- include/linux/power/bq27xxx_battery.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/power/bq27xxx_battery.h b/include/linux/power/bq27xxx_battery.h index 01fbf1b16258..d6355f49fbae 100644 --- a/include/linux/power/bq27xxx_battery.h +++ b/include/linux/power/bq27xxx_battery.h @@ -24,8 +24,9 @@ enum bq27xxx_chip { BQ27546, BQ27742, BQ27545, /* bq27545 */ - BQ27421, /* bq27421, bq27425, bq27441, bq27621 */ + BQ27421, /* bq27421, bq27441, bq27621 */ BQ27425, + BQ27426, BQ27441, BQ27621, }; -- cgit v1.2.3 From 4c4268dc97c424cf6786c4ccc9acf345ba911987 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 22 Mar 2018 11:24:35 +0100 Subject: power: supply: ab8500: Drop AB8540/9540 support The AB8540 was an evolved version of the AB8500, but it was never mass produced or put into products, only reference designs exist. The upstream support was never completed and it is unlikely that this will happen so drop the support for now to simplify maintenance of the AB8500. Cc: Loic Pallardy Signed-off-by: Linus Walleij Acked-by: Lee Jones Signed-off-by: Sebastian Reichel --- include/linux/mfd/abx500.h | 1 - include/linux/mfd/abx500/ab8500-bm.h | 2 -- include/linux/mfd/abx500/ux500_chargalg.h | 4 ---- 3 files changed, 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h index 44412c9d26e1..aa09414756db 100644 --- a/include/linux/mfd/abx500.h +++ b/include/linux/mfd/abx500.h @@ -271,7 +271,6 @@ struct abx500_bm_data { bool autopower_cfg; bool ac_enabled; bool usb_enabled; - bool usb_power_path; bool no_maintenance; bool capacity_scaling; bool chg_unknown_bat; diff --git a/include/linux/mfd/abx500/ab8500-bm.h b/include/linux/mfd/abx500/ab8500-bm.h index e63681eb6c62..c06daf3d490a 100644 --- a/include/linux/mfd/abx500/ab8500-bm.h +++ b/include/linux/mfd/abx500/ab8500-bm.h @@ -248,8 +248,6 @@ enum bup_vch_sel { #define BAT_CTRL_20U_ENA 0x02 #define BAT_CTRL_18U_ENA 0x01 #define BAT_CTRL_16U_ENA 0x02 -#define BAT_CTRL_60U_ENA 0x01 -#define BAT_CTRL_120U_ENA 0x02 #define BAT_CTRL_CMP_ENA 0x04 #define FORCE_BAT_CTRL_CMP_HIGH 0x08 #define BAT_CTRL_PULL_UP_ENA 0x10 diff --git a/include/linux/mfd/abx500/ux500_chargalg.h b/include/linux/mfd/abx500/ux500_chargalg.h index 67703f23e7ba..669894f434f5 100644 --- a/include/linux/mfd/abx500/ux500_chargalg.h +++ b/include/linux/mfd/abx500/ux500_chargalg.h @@ -25,8 +25,6 @@ struct ux500_charger_ops { int (*check_enable) (struct ux500_charger *, int, int); int (*kick_wd) (struct ux500_charger *); int (*update_curr) (struct ux500_charger *, int); - int (*pp_enable) (struct ux500_charger *, bool); - int (*pre_chg_enable) (struct ux500_charger *, bool); }; /** @@ -37,7 +35,6 @@ struct ux500_charger_ops { * @max_out_curr maximum output charger current in mA * @enabled indicates if this charger is used or not * @external external charger unit (pm2xxx) - * @power_path USB power path support */ struct ux500_charger { struct power_supply *psy; @@ -47,7 +44,6 @@ struct ux500_charger { int wdt_refresh; bool enabled; bool external; - bool power_path; }; extern struct blocking_notifier_head charger_notifier_list; -- cgit v1.2.3 From 227abcc6da7b803e380f034d6772ea0861612340 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 26 Apr 2018 08:58:27 +0300 Subject: staging: kernel.h: Prevent macro expantion bug in container_of_safe() There aren't many users of this so it doesn't cause a problem, but we obviously want to use "__mptr" here instead of "ptr" to prevent the parameter from being executed twice. Signed-off-by: Dan Carpenter Acked-by: NeilBrown Signed-off-by: Greg Kroah-Hartman --- include/linux/kernel.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 58d6645b1425..3dfa3f260fc4 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -977,7 +977,7 @@ static inline void ftrace_dump(enum ftrace_dump_mode oops_dump_mode) { } BUILD_BUG_ON_MSG(!__same_type(*(ptr), ((type *)0)->member) && \ !__same_type(*(ptr), void), \ "pointer type mismatch in container_of()"); \ - IS_ERR_OR_NULL(ptr) ? ERR_CAST(ptr) : \ + IS_ERR_OR_NULL(__mptr) ? ERR_CAST(__mptr) : \ ((type *)(__mptr - offsetof(type, member))); }) /* Rebuild everything on CONFIG_FTRACE_MCOUNT_RECORD */ -- cgit v1.2.3 From ab42ddb9eb71b580349b03e4fc5bfcf230422eb8 Mon Sep 17 00:00:00 2001 From: Eric Long Date: Thu, 19 Apr 2018 10:00:48 +0800 Subject: dmaengine: sprd: Move DMA request mode and interrupt type into head file This patch will move the Spreadtrum DMA request mode and interrupt type into one head file for user to configure. Signed-off-by: Eric Long Signed-off-by: Baolin Wang Signed-off-by: Vinod Koul --- include/linux/dma/sprd-dma.h | 57 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 57 insertions(+) create mode 100644 include/linux/dma/sprd-dma.h (limited to 'include/linux') diff --git a/include/linux/dma/sprd-dma.h b/include/linux/dma/sprd-dma.h new file mode 100644 index 000000000000..c545162e725b --- /dev/null +++ b/include/linux/dma/sprd-dma.h @@ -0,0 +1,57 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef _SPRD_DMA_H_ +#define _SPRD_DMA_H_ + +/* + * enum sprd_dma_req_mode: define the DMA request mode + * @SPRD_DMA_FRAG_REQ: fragment request mode + * @SPRD_DMA_BLK_REQ: block request mode + * @SPRD_DMA_TRANS_REQ: transaction request mode + * @SPRD_DMA_LIST_REQ: link-list request mode + * + * We have 4 types request mode: fragment mode, block mode, transaction mode + * and linklist mode. One transaction can contain several blocks, one block can + * contain several fragments. Link-list mode means we can save several DMA + * configuration into one reserved memory, then DMA can fetch each DMA + * configuration automatically to start transfer. + */ +enum sprd_dma_req_mode { + SPRD_DMA_FRAG_REQ, + SPRD_DMA_BLK_REQ, + SPRD_DMA_TRANS_REQ, + SPRD_DMA_LIST_REQ, +}; + +/* + * enum sprd_dma_int_type: define the DMA interrupt type + * @SPRD_DMA_NO_INT: do not need generate DMA interrupts. + * @SPRD_DMA_FRAG_INT: fragment done interrupt when one fragment request + * is done. + * @SPRD_DMA_BLK_INT: block done interrupt when one block request is done. + * @SPRD_DMA_BLK_FRAG_INT: block and fragment interrupt when one fragment + * or one block request is done. + * @SPRD_DMA_TRANS_INT: tansaction done interrupt when one transaction + * request is done. + * @SPRD_DMA_TRANS_FRAG_INT: transaction and fragment interrupt when one + * transaction request or fragment request is done. + * @SPRD_DMA_TRANS_BLK_INT: transaction and block interrupt when one + * transaction request or block request is done. + * @SPRD_DMA_LIST_INT: link-list done interrupt when one link-list request + * is done. + * @SPRD_DMA_CFGERR_INT: configure error interrupt when configuration is + * incorrect. + */ +enum sprd_dma_int_type { + SPRD_DMA_NO_INT, + SPRD_DMA_FRAG_INT, + SPRD_DMA_BLK_INT, + SPRD_DMA_BLK_FRAG_INT, + SPRD_DMA_TRANS_INT, + SPRD_DMA_TRANS_FRAG_INT, + SPRD_DMA_TRANS_BLK_INT, + SPRD_DMA_LIST_INT, + SPRD_DMA_CFGERR_INT, +}; + +#endif -- cgit v1.2.3 From 256c4fc76a80a69a5108069d8a09b3836bbf6542 Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Sun, 22 Apr 2018 18:02:30 +0200 Subject: mtd: rawnand: add a way to pass an ID table with nand_scan() As part of the work of migrating all the drivers to nand_scan(), and because nand_scan() does not provide a way to pass an ID table, rename the function nand_scan_with_ids() and add a third parameter to give a flash ID table (like what was done with nand_scan_ident()). Create a nand_scan() helper that is just a wrapper of nand_scan_with_ids(), passing NULL as the ID table. This way a controller drivers can continue using nand_scan() transparently. Signed-off-by: Miquel Raynal Signed-off-by: Boris Brezillon --- include/linux/mtd/rawnand.h | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h index 5dad59b31244..ba8d908f5cc7 100644 --- a/include/linux/mtd/rawnand.h +++ b/include/linux/mtd/rawnand.h @@ -28,7 +28,14 @@ struct nand_flash_dev; struct device_node; /* Scan and identify a NAND device */ -int nand_scan(struct mtd_info *mtd, int max_chips); +int nand_scan_with_ids(struct mtd_info *mtd, int max_chips, + struct nand_flash_dev *ids); + +static inline int nand_scan(struct mtd_info *mtd, int max_chips) +{ + return nand_scan_with_ids(mtd, max_chips, NULL); +} + /* * Separate phases of nand_scan(), allowing board driver to intervene * and override command or ECC setup according to flash type. -- cgit v1.2.3 From 6552d3141064f09736580dc2dc527019762cbf71 Mon Sep 17 00:00:00 2001 From: Andrey Smirnov Date: Thu, 8 Mar 2018 11:20:45 -0800 Subject: backlight: Add RAVE SP backlight driver This driver provides access to RAVE SP backlight control functionality. Signed-off-by: Andrey Smirnov Acked-by: Daniel Thompson Signed-off-by: Lee Jones --- include/linux/mfd/rave-sp.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mfd/rave-sp.h b/include/linux/mfd/rave-sp.h index 796fb9794c9e..fe0ce7bc59cf 100644 --- a/include/linux/mfd/rave-sp.h +++ b/include/linux/mfd/rave-sp.h @@ -21,6 +21,7 @@ enum rave_sp_command { RAVE_SP_CMD_STATUS = 0xA0, RAVE_SP_CMD_SW_WDT = 0xA1, RAVE_SP_CMD_PET_WDT = 0xA2, + RAVE_SP_CMD_SET_BACKLIGHT = 0xA6, RAVE_SP_CMD_RESET = 0xA7, RAVE_SP_CMD_RESET_REASON = 0xA8, -- cgit v1.2.3 From 3157694d8c7fed9046dece8b63434cafef21cbf6 Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Wed, 28 Mar 2018 19:03:25 +0200 Subject: pwm-backlight: Add support for PWM delays proprieties. Some panels (i.e. N116BGE-L41), in their power sequence specifications, request a delay between set the PWM signal and enable the backlight and between clear the PWM signal and disable the backlight. Add support for the new post-pwm-on-delay-ms and pwm-off-delay-ms proprieties to meet the timings. Signed-off-by: Enric Balletbo i Serra Acked-by: Pavel Machek Acked-by: Daniel Thompson Acked-by: Jingoo Han Acked-by: Thierry Reding Signed-off-by: Lee Jones --- include/linux/pwm_backlight.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pwm_backlight.h b/include/linux/pwm_backlight.h index e8afbd71a140..8ea265a022fd 100644 --- a/include/linux/pwm_backlight.h +++ b/include/linux/pwm_backlight.h @@ -14,6 +14,8 @@ struct platform_pwm_backlight_data { unsigned int lth_brightness; unsigned int pwm_period_ns; unsigned int *levels; + unsigned int post_pwm_on_delay; + unsigned int pwm_off_delay; /* TODO remove once all users are switched to gpiod_* API */ int enable_gpio; int (*init)(struct device *dev); -- cgit v1.2.3 From 3a0c991fe3b48be02373102b1d06cb99934f0bee Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Wed, 25 Apr 2018 19:42:48 +0200 Subject: backlight: Nuke unused backlight.props.state states The backlight power state handling is supremely confusing. We have: - props.power, using FB_BLANK_* defines - props.fb_blank, using the same, but deprecated int favour of props.state - props.state, using the BL_CORE_* defines - and finally a bunch of backlight drivers treat brightness == 0 as off. But of course not all of them. This is way too much confusion to fix in a simple patch, but at least prevent more hilarity from spreading by removing the unused BL_CORE_* defines. I have no idea why exactly anyone would need that. Wrt the ideal state, we really just want a boolean state. The 4 power saving states that the fbdev subsystem uses are overkill in todays hw (this was only relevant for VGA and similar analog circuits like TV-out), the new drm atomic modeset api simplified even the uapi to a simple bool. And there was never a valid technical reason to have the intermediate fbdev power states for backlights (those really only can be either off or on). Cleanup motivated by Meghana's questions about all this. Signed-off-by: Daniel Vetter Acked-by: Daniel Thompson Acked-by: Jingoo Han Reviewed-by: Jani Nikula Signed-off-by: Lee Jones --- include/linux/backlight.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/backlight.h b/include/linux/backlight.h index 2baab6f3861d..1db67662bfcb 100644 --- a/include/linux/backlight.h +++ b/include/linux/backlight.h @@ -84,9 +84,6 @@ struct backlight_properties { #define BL_CORE_SUSPENDED (1 << 0) /* backlight is suspended */ #define BL_CORE_FBBLANK (1 << 1) /* backlight is under an fb blank event */ -#define BL_CORE_DRIVER4 (1 << 28) /* reserved for driver specific use */ -#define BL_CORE_DRIVER3 (1 << 29) /* reserved for driver specific use */ -#define BL_CORE_DRIVER2 (1 << 30) /* reserved for driver specific use */ #define BL_CORE_DRIVER1 (1 << 31) /* reserved for driver specific use */ }; -- cgit v1.2.3 From 3cf91adaa594e8933af1727942ac560e5c7bc70e Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Wed, 25 Apr 2018 19:42:52 +0200 Subject: backlight: Nuke BL_CORE_DRIVER1 Now that the 3 drivers using this are cleaned up we can also remove this final bit of confusion of leaking driver internals into the backlight power interface. The backlight power interface itself is still a massive mess. Signed-off-by: Daniel Vetter Acked-by: Daniel Thompson Reviewed-by: Jani Nikula Signed-off-by: Lee Jones --- include/linux/backlight.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/backlight.h b/include/linux/backlight.h index 1db67662bfcb..7fbf0539e14a 100644 --- a/include/linux/backlight.h +++ b/include/linux/backlight.h @@ -84,7 +84,6 @@ struct backlight_properties { #define BL_CORE_SUSPENDED (1 << 0) /* backlight is suspended */ #define BL_CORE_FBBLANK (1 << 1) /* backlight is under an fb blank event */ -#define BL_CORE_DRIVER1 (1 << 31) /* reserved for driver specific use */ }; -- cgit v1.2.3 From e7420c2d4495cbb9c14dd8bf8b3b4e5bdded6e20 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 16 Apr 2018 10:26:46 -0700 Subject: bus: ti-sysc: Tag some modules resource providers for noirq suspend Modules that provide resources for other modules need to be suspended and resumed in the noirq calls. Tag the resource providing modules. Signed-off-by: Tony Lindgren --- include/linux/platform_data/ti-sysc.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h index 80ce28d40832..990aad477458 100644 --- a/include/linux/platform_data/ti-sysc.h +++ b/include/linux/platform_data/ti-sysc.h @@ -45,6 +45,7 @@ struct sysc_regbits { s8 emufree_shift; }; +#define SYSC_QUIRK_RESOURCE_PROVIDER BIT(9) #define SYSC_QUIRK_LEGACY_IDLE BIT(8) #define SYSC_QUIRK_RESET_STATUS BIT(7) #define SYSC_QUIRK_NO_IDLE_ON_INIT BIT(6) -- cgit v1.2.3 From bde1a3d84634f98151e3f748ab90865e9f544b10 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Mon, 30 Apr 2018 10:24:42 +0200 Subject: mtd: rawnand: davinci: store the core chipselect number in platform data We have the 'ti,davinci-chipselect' property in the device tree, but when using platform data the driver silently uses the id field of struct platform_device as the chipselect. This is confusing and we almost broke the nand support again recently after converting the platform to common clock framework (which changed the device id in the clock lookup - the problem is gone now that we no longer acquire the clock in the nand driver. This patch adds a new field - core_chipsel - to the platform_data. Subsequent patches will convert the platforms to using this new field. Acked-by: Boris Brezillon Signed-off-by: Bartosz Golaszewski Signed-off-by: Sekhar Nori --- include/linux/platform_data/mtd-davinci.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux') diff --git a/include/linux/platform_data/mtd-davinci.h b/include/linux/platform_data/mtd-davinci.h index f1a2cf655bdb..1bbfa27cccb4 100644 --- a/include/linux/platform_data/mtd-davinci.h +++ b/include/linux/platform_data/mtd-davinci.h @@ -56,6 +56,16 @@ struct davinci_nand_pdata { /* platform_data */ uint32_t mask_ale; uint32_t mask_cle; + /* + * 0-indexed chip-select number of the asynchronous + * interface to which the NAND device has been connected. + * + * So, if you have NAND connected to CS3 of DA850, you + * will pass '1' here. Since the asynchronous interface + * on DA850 starts from CS2. + */ + uint32_t core_chipsel; + /* for packages using two chipselects */ uint32_t mask_chipsel; -- cgit v1.2.3 From eb06d6bbc45a7561de78a00fb17bfbb75893ee26 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 18 Apr 2018 16:50:01 +0200 Subject: clk: Extract OF clock helpers in The use of of_clk_get_parent_{count,name}() and of_clk_init() is not limited to clock providers. Hence move these helpers into their own header file, so callers that are not clock providers no longer have to include . Suggested-by: Stephen Boyd Signed-off-by: Geert Uytterhoeven Reviewed-by: Heiko Stuebner Signed-off-by: Stephen Boyd --- include/linux/clk-provider.h | 14 +------------- include/linux/of_clk.h | 30 ++++++++++++++++++++++++++++++ 2 files changed, 31 insertions(+), 13 deletions(-) create mode 100644 include/linux/of_clk.h (limited to 'include/linux') diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 210a890008f9..61cb4729f22a 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -13,6 +13,7 @@ #include #include +#include #ifdef CONFIG_COMMON_CLK @@ -890,13 +891,10 @@ struct clk_hw *of_clk_hw_simple_get(struct of_phandle_args *clkspec, struct clk *of_clk_src_onecell_get(struct of_phandle_args *clkspec, void *data); struct clk_hw *of_clk_hw_onecell_get(struct of_phandle_args *clkspec, void *data); -unsigned int of_clk_get_parent_count(struct device_node *np); int of_clk_parent_fill(struct device_node *np, const char **parents, unsigned int size); -const char *of_clk_get_parent_name(struct device_node *np, int index); int of_clk_detect_critical(struct device_node *np, int index, unsigned long *flags); -void of_clk_init(const struct of_device_id *matches); #else /* !CONFIG_OF */ @@ -943,26 +941,16 @@ of_clk_hw_onecell_get(struct of_phandle_args *clkspec, void *data) { return ERR_PTR(-ENOENT); } -static inline unsigned int of_clk_get_parent_count(struct device_node *np) -{ - return 0; -} static inline int of_clk_parent_fill(struct device_node *np, const char **parents, unsigned int size) { return 0; } -static inline const char *of_clk_get_parent_name(struct device_node *np, - int index) -{ - return NULL; -} static inline int of_clk_detect_critical(struct device_node *np, int index, unsigned long *flags) { return 0; } -static inline void of_clk_init(const struct of_device_id *matches) {} #endif /* CONFIG_OF */ /* diff --git a/include/linux/of_clk.h b/include/linux/of_clk.h new file mode 100644 index 000000000000..b27da9f164cb --- /dev/null +++ b/include/linux/of_clk.h @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * OF clock helpers + */ + +#ifndef __LINUX_OF_CLK_H +#define __LINUX_OF_CLK_H + +#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_OF) + +unsigned int of_clk_get_parent_count(struct device_node *np); +const char *of_clk_get_parent_name(struct device_node *np, int index); +void of_clk_init(const struct of_device_id *matches); + +#else /* !CONFIG_COMMON_CLK || !CONFIG_OF */ + +static inline unsigned int of_clk_get_parent_count(struct device_node *np) +{ + return 0; +} +static inline const char *of_clk_get_parent_name(struct device_node *np, + int index) +{ + return NULL; +} +static inline void of_clk_init(const struct of_device_id *matches) {} + +#endif /* !CONFIG_COMMON_CLK || !CONFIG_OF */ + +#endif /* __LINUX_OF_CLK_H */ -- cgit v1.2.3 From 0cb8dae4a0df2a977847c2dc6766a7783ce50f9d Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Wed, 18 Apr 2018 11:09:47 -0700 Subject: fscrypt: allow synchronous bio decryption Currently, fscrypt provides fscrypt_decrypt_bio_pages() which decrypts a bio's pages asynchronously, then unlocks them afterwards. But, this assumes that decryption is the last "postprocessing step" for the bio, so it's incompatible with additional postprocessing steps such as authenticity verification after decryption. Therefore, rename the existing fscrypt_decrypt_bio_pages() to fscrypt_enqueue_decrypt_bio(). Then, add fscrypt_decrypt_bio() which decrypts the pages in the bio synchronously without unlocking the pages, nor setting them Uptodate; and add fscrypt_enqueue_decrypt_work(), which enqueues work on the fscrypt_read_workqueue. The new functions will be used by filesystems that support both fscrypt and fs-verity. Signed-off-by: Eric Biggers Signed-off-by: Jaegeuk Kim --- include/linux/fscrypt_notsupp.h | 13 ++++++++++--- include/linux/fscrypt_supp.h | 5 ++++- 2 files changed, 14 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fscrypt_notsupp.h b/include/linux/fscrypt_notsupp.h index 44b50c04bae9..9770be37c9d4 100644 --- a/include/linux/fscrypt_notsupp.h +++ b/include/linux/fscrypt_notsupp.h @@ -25,6 +25,10 @@ static inline bool fscrypt_dummy_context_enabled(struct inode *inode) } /* crypto.c */ +static inline void fscrypt_enqueue_decrypt_work(struct work_struct *work) +{ +} + static inline struct fscrypt_ctx *fscrypt_get_ctx(const struct inode *inode, gfp_t gfp_flags) { @@ -160,10 +164,13 @@ static inline bool fscrypt_match_name(const struct fscrypt_name *fname, } /* bio.c */ -static inline void fscrypt_decrypt_bio_pages(struct fscrypt_ctx *ctx, - struct bio *bio) +static inline void fscrypt_decrypt_bio(struct bio *bio) +{ +} + +static inline void fscrypt_enqueue_decrypt_bio(struct fscrypt_ctx *ctx, + struct bio *bio) { - return; } static inline void fscrypt_pullback_bio_page(struct page **page, bool restore) diff --git a/include/linux/fscrypt_supp.h b/include/linux/fscrypt_supp.h index 477a7a6504d2..2c9a86ac5e83 100644 --- a/include/linux/fscrypt_supp.h +++ b/include/linux/fscrypt_supp.h @@ -59,6 +59,7 @@ static inline bool fscrypt_dummy_context_enabled(struct inode *inode) } /* crypto.c */ +extern void fscrypt_enqueue_decrypt_work(struct work_struct *); extern struct fscrypt_ctx *fscrypt_get_ctx(const struct inode *, gfp_t); extern void fscrypt_release_ctx(struct fscrypt_ctx *); extern struct page *fscrypt_encrypt_page(const struct inode *, struct page *, @@ -188,7 +189,9 @@ static inline bool fscrypt_match_name(const struct fscrypt_name *fname, } /* bio.c */ -extern void fscrypt_decrypt_bio_pages(struct fscrypt_ctx *, struct bio *); +extern void fscrypt_decrypt_bio(struct bio *); +extern void fscrypt_enqueue_decrypt_bio(struct fscrypt_ctx *ctx, + struct bio *bio); extern void fscrypt_pullback_bio_page(struct page **, bool); extern int fscrypt_zeroout_range(const struct inode *, pgoff_t, sector_t, unsigned int); -- cgit v1.2.3 From 1e0a601437a6111ecf384df010812c53cada6497 Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Fri, 4 May 2018 23:10:23 -0700 Subject: firmware: ti_sci: Switch to SPDX Licensing Switch to SPDX licensing and drop the GPL text which comes redundant. Acked-by: Nishanth Menon Signed-off-by: Lokesh Vutla Signed-off-by: Santosh Shilimkar --- include/linux/soc/ti/ti_sci_protocol.h | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) (limited to 'include/linux') diff --git a/include/linux/soc/ti/ti_sci_protocol.h b/include/linux/soc/ti/ti_sci_protocol.h index 0ccbc138c26a..18435e5c6364 100644 --- a/include/linux/soc/ti/ti_sci_protocol.h +++ b/include/linux/soc/ti/ti_sci_protocol.h @@ -1,17 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Texas Instruments System Control Interface Protocol * * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/ * Nishanth Menon - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #ifndef __TISCI_PROTOCOL_H -- cgit v1.2.3 From a2268cfbf599e7f55d4ee68193f08b4f44535fac Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Fri, 4 May 2018 15:34:32 -0400 Subject: xprtrdma: Add proper SPDX tags for NetApp-contributed source Signed-off-by: Chuck Lever Signed-off-by: Anna Schumaker --- include/linux/sunrpc/rpc_rdma.h | 1 + include/linux/sunrpc/xprtrdma.h | 1 + 2 files changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/sunrpc/rpc_rdma.h b/include/linux/sunrpc/rpc_rdma.h index 8f144db73e38..92d182fd8e3b 100644 --- a/include/linux/sunrpc/rpc_rdma.h +++ b/include/linux/sunrpc/rpc_rdma.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ /* * Copyright (c) 2015-2017 Oracle. All rights reserved. * Copyright (c) 2003-2007 Network Appliance, Inc. All rights reserved. diff --git a/include/linux/sunrpc/xprtrdma.h b/include/linux/sunrpc/xprtrdma.h index 5859563e3c1f..86fc38ff0355 100644 --- a/include/linux/sunrpc/xprtrdma.h +++ b/include/linux/sunrpc/xprtrdma.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ /* * Copyright (c) 2003-2007 Network Appliance, Inc. All rights reserved. * -- cgit v1.2.3 From 37ac86c3a76c113619b7d9afe0251bbfc04cb80a Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Fri, 4 May 2018 15:34:53 -0400 Subject: SUNRPC: Initialize rpc_rqst outside of xprt->reserve_lock alloc_slot is a transport-specific op, but initializing an rpc_rqst is common to all transports. In addition, the only part of initial- izing an rpc_rqst that needs serialization is getting a fresh XID. Move rpc_rqst initialization to common code in preparation for adding a transport-specific alloc_slot to xprtrdma. Signed-off-by: Chuck Lever Signed-off-by: Anna Schumaker --- include/linux/sunrpc/xprt.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index 5fea0fb420df..9784e2875e7e 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -324,6 +324,7 @@ struct xprt_class { struct rpc_xprt *xprt_create_transport(struct xprt_create *args); void xprt_connect(struct rpc_task *task); void xprt_reserve(struct rpc_task *task); +void xprt_request_init(struct rpc_task *task); void xprt_retry_reserve(struct rpc_task *task); int xprt_reserve_xprt(struct rpc_xprt *xprt, struct rpc_task *task); int xprt_reserve_xprt_cong(struct rpc_xprt *xprt, struct rpc_task *task); -- cgit v1.2.3 From a9cde23ab7cdf5e4e93432dffd0e734267f2b745 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Fri, 4 May 2018 15:34:59 -0400 Subject: SUNRPC: Add a ->free_slot transport callout Refactor: xprtrdma needs to have better control over when RPCs are awoken from the backlog queue, so replace xprt_free_slot with a transport op callout. Signed-off-by: Chuck Lever Signed-off-by: Anna Schumaker --- include/linux/sunrpc/xprt.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index 9784e2875e7e..706eef12bbc0 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -127,6 +127,8 @@ struct rpc_xprt_ops { int (*reserve_xprt)(struct rpc_xprt *xprt, struct rpc_task *task); void (*release_xprt)(struct rpc_xprt *xprt, struct rpc_task *task); void (*alloc_slot)(struct rpc_xprt *xprt, struct rpc_task *task); + void (*free_slot)(struct rpc_xprt *xprt, + struct rpc_rqst *req); void (*rpcbind)(struct rpc_task *task); void (*set_port)(struct rpc_xprt *xprt, unsigned short port); void (*connect)(struct rpc_xprt *xprt, struct rpc_task *task); @@ -329,6 +331,8 @@ void xprt_retry_reserve(struct rpc_task *task); int xprt_reserve_xprt(struct rpc_xprt *xprt, struct rpc_task *task); int xprt_reserve_xprt_cong(struct rpc_xprt *xprt, struct rpc_task *task); void xprt_alloc_slot(struct rpc_xprt *xprt, struct rpc_task *task); +void xprt_free_slot(struct rpc_xprt *xprt, + struct rpc_rqst *req); void xprt_lock_and_alloc_slot(struct rpc_xprt *xprt, struct rpc_task *task); bool xprt_prepare_transmit(struct rpc_task *task); void xprt_transmit(struct rpc_task *task); -- cgit v1.2.3 From edb41e61a54ee75fae31302775e0301fdcb0caaa Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Fri, 4 May 2018 15:35:09 -0400 Subject: xprtrdma: Make rpc_rqst part of rpcrdma_req This simplifies allocation of the generic RPC slot and xprtrdma specific per-RPC resources. It also makes xprtrdma more like the socket-based transports: ->buf_alloc and ->buf_free are now responsible only for send and receive buffers. Signed-off-by: Chuck Lever Signed-off-by: Anna Schumaker --- include/linux/sunrpc/xprt.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index 706eef12bbc0..336fd1a19cca 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -84,7 +84,6 @@ struct rpc_rqst { void (*rq_release_snd_buf)(struct rpc_rqst *); /* release rq_enc_pages */ struct list_head rq_list; - void *rq_xprtdata; /* Per-xprt private data */ void *rq_buffer; /* Call XDR encode buffer */ size_t rq_callsize; void *rq_rbuffer; /* Reply XDR decode buffer */ -- cgit v1.2.3 From 04e7b3d7eabefa0807b398233f019f274945ee79 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 7 May 2018 06:35:51 -0300 Subject: iio: iio.h: use nested struct support on kernel-doc markup Solve those Sphinx warnings: ./include/linux/iio/iio.h:270: warning: Function parameter or member 'scan_type.sign' not described in 'iio_chan_spec' ./include/linux/iio/iio.h:270: warning: Function parameter or member 'scan_type.realbits' not described in 'iio_chan_spec' ./include/linux/iio/iio.h:270: warning: Function parameter or member 'scan_type.storagebits' not described in 'iio_chan_spec' ./include/linux/iio/iio.h:270: warning: Function parameter or member 'scan_type.shift' not described in 'iio_chan_spec' ./include/linux/iio/iio.h:270: warning: Function parameter or member 'scan_type.repeat' not described in 'iio_chan_spec' ./include/linux/iio/iio.h:270: warning: Function parameter or member 'scan_type.endianness' not described in 'iio_chan_spec' ./include/linux/iio/iio.h:191: WARNING: Unexpected indentation. ./include/linux/iio/iio.h:192: WARNING: Block quote ends without a blank line; unexpected unindent. ./include/linux/iio/iio.h:198: WARNING: Definition list ends without a blank line; unexpected unindent. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Jonathan Cameron --- include/linux/iio/iio.h | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'include/linux') diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index 11579fd4126e..a74cb177dc6f 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -183,18 +183,18 @@ struct iio_event_spec { * @address: Driver specific identifier. * @scan_index: Monotonic index to give ordering in scans when read * from a buffer. - * @scan_type: sign: 's' or 'u' to specify signed or unsigned - * realbits: Number of valid bits of data - * storagebits: Realbits + padding - * shift: Shift right by this before masking out - * realbits. - * repeat: Number of times real/storage bits - * repeats. When the repeat element is - * more than 1, then the type element in - * sysfs will show a repeat value. - * Otherwise, the number of repetitions is - * omitted. - * endianness: little or big endian + * @scan_type: struct describing the scan type + * @scan_type.sign: 's' or 'u' to specify signed or unsigned + * @scan_type.realbits: Number of valid bits of data + * @scan_type.storagebits: Realbits + padding + * @scan_type.shift: Shift right by this before masking out + * realbits. + * @scan_type.repeat: Number of times real/storage bits repeats. + * When the repeat element is more than 1, then + * the type element in sysfs will show a repeat + * value. Otherwise, the number of repetitions + * is omitted. + * @scan_type.endianness: little or big endian * @info_mask_separate: What information is to be exported that is specific to * this channel. * @info_mask_separate_available: What availability information is to be -- cgit v1.2.3 From a676688032e819c4bb1999a422553a1a1f52ce45 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 7 May 2018 06:35:52 -0300 Subject: mtd: rawnand.h: use nested union kernel-doc markups Gets rid of those warnings and better document the parameters. ./include/linux/mtd/rawnand.h:752: warning: Function parameter or member 'timings.sdr' not described in 'nand_data_interface' ./include/linux/mtd/rawnand.h:817: warning: Function parameter or member 'buf' not described in 'nand_op_data_instr' ./include/linux/mtd/rawnand.h:817: warning: Function parameter or member 'buf.in' not described in 'nand_op_data_instr' ./include/linux/mtd/rawnand.h:817: warning: Function parameter or member 'buf.out' not described in 'nand_op_data_instr' ./include/linux/mtd/rawnand.h:863: warning: Function parameter or member 'ctx' not described in 'nand_op_instr' ./include/linux/mtd/rawnand.h:863: warning: Function parameter or member 'ctx.cmd' not described in 'nand_op_instr' ./include/linux/mtd/rawnand.h:863: warning: Function parameter or member 'ctx.addr' not described in 'nand_op_instr' ./include/linux/mtd/rawnand.h:863: warning: Function parameter or member 'ctx.data' not described in 'nand_op_instr' ./include/linux/mtd/rawnand.h:863: warning: Function parameter or member 'ctx.waitrdy' not described in 'nand_op_instr' ./include/linux/mtd/rawnand.h:1010: warning: Function parameter or member 'ctx' not described in 'nand_op_parser_pattern_elem' ./include/linux/mtd/rawnand.h:1010: warning: Function parameter or member 'ctx.addr' not described in 'nand_op_parser_pattern_elem' ./include/linux/mtd/rawnand.h:1010: warning: Function parameter or member 'ctx.data' not described in 'nand_op_parser_pattern_elem' ./include/linux/mtd/rawnand.h:1313: warning: Function parameter or member 'manufacturer.desc' not described in 'nand_chip' ./include/linux/mtd/rawnand.h:1313: warning: Function parameter or member 'manufacturer.priv' not described in 'nand_chip' ./include/linux/mtd/rawnand.h:848: WARNING: Unexpected indentation. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Boris Brezillon --- include/linux/mtd/rawnand.h | 26 ++++++++++++++++++-------- 1 file changed, 18 insertions(+), 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h index ba8d908f5cc7..a206172ec23b 100644 --- a/include/linux/mtd/rawnand.h +++ b/include/linux/mtd/rawnand.h @@ -747,8 +747,9 @@ enum nand_data_interface_type { /** * struct nand_data_interface - NAND interface timing - * @type: type of the timing - * @timings: The timing, type according to @type + * @type: type of the timing + * @timings: The timing, type according to @type + * @timings.sdr: Use it when @type is %NAND_SDR_IFACE. */ struct nand_data_interface { enum nand_data_interface_type type; @@ -805,8 +806,9 @@ struct nand_op_addr_instr { /** * struct nand_op_data_instr - Definition of a data instruction * @len: number of data bytes to move - * @in: buffer to fill when reading from the NAND chip - * @out: buffer to read from when writing to the NAND chip + * @buf: buffer to fill + * @buf.in: buffer to fill when reading from the NAND chip + * @buf.out: buffer to read from when writing to the NAND chip * @force_8bit: force 8-bit access * * Please note that "in" and "out" are inverted from the ONFI specification @@ -849,9 +851,13 @@ enum nand_op_instr_type { /** * struct nand_op_instr - Instruction object * @type: the instruction type - * @cmd/@addr/@data/@waitrdy: extra data associated to the instruction. - * You'll have to use the appropriate element - * depending on @type + * @ctx: extra data associated to the instruction. You'll have to use the + * appropriate element depending on @type + * @ctx.cmd: use it if @type is %NAND_OP_CMD_INSTR + * @ctx.addr: use it if @type is %NAND_OP_ADDR_INSTR + * @ctx.data: use it if @type is %NAND_OP_DATA_IN_INSTR + * or %NAND_OP_DATA_OUT_INSTR + * @ctx.waitrdy: use it if @type is %NAND_OP_WAITRDY_INSTR * @delay_ns: delay the controller should apply after the instruction has been * issued on the bus. Most modern controllers have internal timings * control logic, and in this case, the controller driver can ignore @@ -1004,7 +1010,9 @@ struct nand_op_parser_data_constraints { * struct nand_op_parser_pattern_elem - One element of a pattern * @type: the instructuction type * @optional: whether this element of the pattern is optional or mandatory - * @addr/@data: address or data constraint (number of cycles or data length) + * @ctx: address or data constraint + * @ctx.addr: address constraint (number of cycles) + * @ctx.data: data constraint (data length) */ struct nand_op_parser_pattern_elem { enum nand_op_instr_type type; @@ -1231,6 +1239,8 @@ int nand_op_parser_exec_op(struct nand_chip *chip, * devices. * @priv: [OPTIONAL] pointer to private chip data * @manufacturer: [INTERN] Contains manufacturer information + * @manufacturer.desc: [INTERN] Contains manufacturer's description + * @manufacturer.priv: [INTERN] Contains manufacturer private information */ struct nand_chip { -- cgit v1.2.3 From 1baf47c2e5c946fd17ef07597b9d25722d13ff14 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Wed, 9 May 2018 17:52:06 +0100 Subject: firmware: arm_scmi: fix kernel-docs documentation There are few missing descriptions for function parameters and structure members along with certain instances where excessive function parameters or structure members are described. This patch fixes all of those warnings. Reported-by: Jonathan Cameron Signed-off-by: Sudeep Holla --- include/linux/scmi_protocol.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h index b458c87b866c..a171c1e293e8 100644 --- a/include/linux/scmi_protocol.h +++ b/include/linux/scmi_protocol.h @@ -189,6 +189,14 @@ struct scmi_sensor_ops { * @perf_ops: pointer to set of performance protocol operations * @clk_ops: pointer to set of clock protocol operations * @sensor_ops: pointer to set of sensor protocol operations + * @perf_priv: pointer to private data structure specific to performance + * protocol(for internal use only) + * @clk_priv: pointer to private data structure specific to clock + * protocol(for internal use only) + * @power_priv: pointer to private data structure specific to power + * protocol(for internal use only) + * @sensor_priv: pointer to private data structure specific to sensors + * protocol(for internal use only) */ struct scmi_handle { struct device *dev; -- cgit v1.2.3 From 826950868cd81268913a91b69f00fb6c3f0b6f5b Mon Sep 17 00:00:00 2001 From: Andrzej Hajda Date: Fri, 27 Apr 2018 14:16:38 +0200 Subject: remoteproc/ste: remove abandoned include file STE modem driver has been removed in 2016. This include has no users since then. Signed-off-by: Andrzej Hajda Cc: Jean Delvare Cc: Linus Walleij Cc: Ohad Ben-Cohen Cc: Bjorn Andersson Cc: Suman Anna Acked-by: Jean Delvare Acked-by: Linus Walleij Signed-off-by: Bjorn Andersson --- include/linux/ste_modem_shm.h | 56 ------------------------------------------- 1 file changed, 56 deletions(-) delete mode 100644 include/linux/ste_modem_shm.h (limited to 'include/linux') diff --git a/include/linux/ste_modem_shm.h b/include/linux/ste_modem_shm.h deleted file mode 100644 index 8444a4eff1bb..000000000000 --- a/include/linux/ste_modem_shm.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * Copyright (C) ST-Ericsson AB 2012 - * Author: Sjur Brendeland / sjur.brandeland@stericsson.com - * - * License terms: GNU General Public License (GPL) version 2 - */ - -#ifndef __INC_MODEM_DEV_H -#define __INC_MODEM_DEV_H -#include -#include - -struct ste_modem_device; - -/** - * struct ste_modem_dev_cb - Callbacks for modem initiated events. - * @kick: Called when the modem kicks the host. - * - * This structure contains callbacks for actions triggered by the modem. - */ -struct ste_modem_dev_cb { - void (*kick)(struct ste_modem_device *mdev, int notify_id); -}; - -/** - * struct ste_modem_dev_ops - Functions to control modem and modem interface. - * - * @power: Main power switch, used for cold-start or complete power off. - * @kick: Kick the modem. - * @kick_subscribe: Subscribe for notifications from the modem. - * @setup: Provide callback functions to modem device. - * - * This structure contains functions used by the ste remoteproc driver - * to manage the modem. - */ -struct ste_modem_dev_ops { - int (*power)(struct ste_modem_device *mdev, bool on); - int (*kick)(struct ste_modem_device *mdev, int notify_id); - int (*kick_subscribe)(struct ste_modem_device *mdev, int notify_id); - int (*setup)(struct ste_modem_device *mdev, - struct ste_modem_dev_cb *cfg); -}; - -/** - * struct ste_modem_device - represent the STE modem device - * @pdev: Reference to platform device - * @ops: Operations used to manage the modem. - * @drv_data: Driver private data. - */ -struct ste_modem_device { - struct platform_device pdev; - struct ste_modem_dev_ops ops; - void *drv_data; -}; - -#endif /*INC_MODEM_DEV_H*/ -- cgit v1.2.3 From 7859e08c1bdef00841d29e8ff320264fd6f9257b Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Wed, 9 May 2018 17:52:06 +0100 Subject: firmware: arm_scmi: rename get_transition_latency and add_opps_to_device Most of the scmi code follows the suggestion from Greg KH on a totally different thread[0] to have the subsystem name first, followed by the noun and finally the verb with couple of these exceptions. This patch fixes them so that all the functions names are aligned to that practice. [0] https://www.spinics.net/lists/arm-kernel/msg583673.html Acked-by: Rafael J. Wysocki Signed-off-by: Sudeep Holla --- include/linux/scmi_protocol.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h index a171c1e293e8..f4c9fc0fc755 100644 --- a/include/linux/scmi_protocol.h +++ b/include/linux/scmi_protocol.h @@ -85,8 +85,8 @@ struct scmi_clk_ops { * @level_set: sets the performance level of a domain * @level_get: gets the performance level of a domain * @device_domain_id: gets the scmi domain id for a given device - * @get_transition_latency: gets the DVFS transition latency for a given device - * @add_opps_to_device: adds all the OPPs for a given device + * @transition_latency_get: gets the DVFS transition latency for a given device + * @device_opps_add: adds all the OPPs for a given device * @freq_set: sets the frequency for a given device using sustained frequency * to sustained performance level mapping * @freq_get: gets the frequency for a given device using sustained frequency @@ -102,10 +102,10 @@ struct scmi_perf_ops { int (*level_get)(const struct scmi_handle *handle, u32 domain, u32 *level, bool poll); int (*device_domain_id)(struct device *dev); - int (*get_transition_latency)(const struct scmi_handle *handle, + int (*transition_latency_get)(const struct scmi_handle *handle, struct device *dev); - int (*add_opps_to_device)(const struct scmi_handle *handle, - struct device *dev); + int (*device_opps_add)(const struct scmi_handle *handle, + struct device *dev); int (*freq_set)(const struct scmi_handle *handle, u32 domain, unsigned long rate, bool poll); int (*freq_get)(const struct scmi_handle *handle, u32 domain, -- cgit v1.2.3 From bcf3ffd405df6998914b248d2f22625544a4dd56 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Mon, 7 May 2018 15:26:55 -0400 Subject: svcrdma: Add proper SPDX tags for NetApp-contributed source Signed-off-by: Chuck Lever Signed-off-by: J. Bruce Fields --- include/linux/sunrpc/svc_rdma.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/sunrpc/svc_rdma.h b/include/linux/sunrpc/svc_rdma.h index 7337e1221590..88da0c9bd7b1 100644 --- a/include/linux/sunrpc/svc_rdma.h +++ b/include/linux/sunrpc/svc_rdma.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ /* * Copyright (c) 2005-2006 Network Appliance, Inc. All rights reserved. * -- cgit v1.2.3 From ecf85b2384ea5f7cb0577bf6143bc46d9ecfe4d3 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Mon, 7 May 2018 15:27:21 -0400 Subject: svcrdma: Introduce svc_rdma_recv_ctxt svc_rdma_op_ctxt's are pre-allocated and maintained on a per-xprt free list. This eliminates the overhead of calling kmalloc / kfree, both of which grab a globally shared lock that disables interrupts. To reduce contention further, separate the use of these objects in the Receive and Send paths in svcrdma. Subsequent patches will take advantage of this separation by allocating real resources which are then cached in these objects. The allocations are freed when the transport is torn down. I've renamed the structure so that static type checking can be used to ensure that uses of op_ctxt and recv_ctxt are not confused. As an additional clean up, structure fields are renamed to conform with kernel coding conventions. As a final clean up, helpers related to recv_ctxt are moved closer to the functions that use them. Signed-off-by: Chuck Lever Signed-off-by: J. Bruce Fields --- include/linux/sunrpc/svc_rdma.h | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/sunrpc/svc_rdma.h b/include/linux/sunrpc/svc_rdma.h index 88da0c9bd7b1..37f759d65348 100644 --- a/include/linux/sunrpc/svc_rdma.h +++ b/include/linux/sunrpc/svc_rdma.h @@ -128,6 +128,9 @@ struct svcxprt_rdma { unsigned long sc_flags; struct list_head sc_read_complete_q; struct work_struct sc_work; + + spinlock_t sc_recv_lock; + struct list_head sc_recv_ctxts; }; /* sc_flags */ #define RDMAXPRT_CONN_PENDING 3 @@ -142,6 +145,19 @@ struct svcxprt_rdma { #define RPCSVC_MAXPAYLOAD_RDMA RPCSVC_MAXPAYLOAD +struct svc_rdma_recv_ctxt { + struct list_head rc_list; + struct ib_recv_wr rc_recv_wr; + struct ib_cqe rc_cqe; + struct xdr_buf rc_arg; + u32 rc_byte_len; + unsigned int rc_page_count; + unsigned int rc_hdr_count; + struct ib_sge rc_sges[1 + + RPCRDMA_MAX_INLINE_THRESH / PAGE_SIZE]; + struct page *rc_pages[RPCSVC_MAXPAGES]; +}; + /* Track DMA maps for this transport and context */ static inline void svc_rdma_count_mappings(struct svcxprt_rdma *rdma, struct svc_rdma_op_ctxt *ctxt) @@ -155,13 +171,19 @@ extern int svc_rdma_handle_bc_reply(struct rpc_xprt *xprt, struct xdr_buf *rcvbuf); /* svc_rdma_recvfrom.c */ +extern void svc_rdma_recv_ctxts_destroy(struct svcxprt_rdma *rdma); +extern bool svc_rdma_post_recvs(struct svcxprt_rdma *rdma); +extern void svc_rdma_recv_ctxt_put(struct svcxprt_rdma *rdma, + struct svc_rdma_recv_ctxt *ctxt, + int free_pages); +extern void svc_rdma_flush_recv_queues(struct svcxprt_rdma *rdma); extern int svc_rdma_recvfrom(struct svc_rqst *); /* svc_rdma_rw.c */ extern void svc_rdma_destroy_rw_ctxts(struct svcxprt_rdma *rdma); extern int svc_rdma_recv_read_chunk(struct svcxprt_rdma *rdma, struct svc_rqst *rqstp, - struct svc_rdma_op_ctxt *head, __be32 *p); + struct svc_rdma_recv_ctxt *head, __be32 *p); extern int svc_rdma_send_write_chunk(struct svcxprt_rdma *rdma, __be32 *wr_ch, struct xdr_buf *xdr); extern int svc_rdma_send_reply_chunk(struct svcxprt_rdma *rdma, -- cgit v1.2.3 From 2c577bfea85e421bfa91df16ccf5156361aa8d4b Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Mon, 7 May 2018 15:27:27 -0400 Subject: svcrdma: Remove sc_rq_depth Clean up: No need to retain rq_depth in struct svcrdma_xprt, it is used only in svc_rdma_accept(). Signed-off-by: Chuck Lever Signed-off-by: J. Bruce Fields --- include/linux/sunrpc/svc_rdma.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/sunrpc/svc_rdma.h b/include/linux/sunrpc/svc_rdma.h index 37f759d65348..3cb66319a814 100644 --- a/include/linux/sunrpc/svc_rdma.h +++ b/include/linux/sunrpc/svc_rdma.h @@ -101,7 +101,6 @@ struct svcxprt_rdma { atomic_t sc_sq_avail; /* SQEs ready to be consumed */ unsigned int sc_sq_depth; /* Depth of SQ */ - unsigned int sc_rq_depth; /* Depth of RQ */ __be32 sc_fc_credits; /* Forward credits */ u32 sc_max_requests; /* Max requests */ u32 sc_max_bc_requests;/* Backward credits */ -- cgit v1.2.3 From 1e5f4160745690a0476929d128a336cae95c1df9 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Mon, 7 May 2018 15:27:32 -0400 Subject: svcrdma: Simplify svc_rdma_recv_ctxt_put Currently svc_rdma_recv_ctxt_put's callers have to know whether they want to free the ctxt's pages or not. This means the human developers have to know when and why to set that free_pages argument. Instead, the ctxt should carry that information with it so that svc_rdma_recv_ctxt_put does the right thing no matter who is calling. We want to keep track of the number of pages in the Receive buffer separately from the number of pages pulled over by RDMA Read. This is so that the correct number of pages can be freed properly and that number is well-documented. So now, rc_hdr_count is the number of pages consumed by head[0] (ie., the page index where the Read chunk should start); and rc_page_count is always the number of pages that need to be released when the ctxt is put. The @free_pages argument is no longer needed. Signed-off-by: Chuck Lever Signed-off-by: J. Bruce Fields --- include/linux/sunrpc/svc_rdma.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sunrpc/svc_rdma.h b/include/linux/sunrpc/svc_rdma.h index 3cb66319a814..f0bd0b6d8931 100644 --- a/include/linux/sunrpc/svc_rdma.h +++ b/include/linux/sunrpc/svc_rdma.h @@ -173,8 +173,7 @@ extern int svc_rdma_handle_bc_reply(struct rpc_xprt *xprt, extern void svc_rdma_recv_ctxts_destroy(struct svcxprt_rdma *rdma); extern bool svc_rdma_post_recvs(struct svcxprt_rdma *rdma); extern void svc_rdma_recv_ctxt_put(struct svcxprt_rdma *rdma, - struct svc_rdma_recv_ctxt *ctxt, - int free_pages); + struct svc_rdma_recv_ctxt *ctxt); extern void svc_rdma_flush_recv_queues(struct svcxprt_rdma *rdma); extern int svc_rdma_recvfrom(struct svc_rqst *); -- cgit v1.2.3 From 3316f0631139c87631f2652c118da1a0354bd40d Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Mon, 7 May 2018 15:27:43 -0400 Subject: svcrdma: Persistently allocate and DMA-map Receive buffers The current Receive path uses an array of pages which are allocated and DMA mapped when each Receive WR is posted, and then handed off to the upper layer in rqstp::rq_arg. The page flip releases unused pages in the rq_pages pagelist. This mechanism introduces a significant amount of overhead. So instead, kmalloc the Receive buffer, and leave it DMA-mapped while the transport remains connected. This confers a number of benefits: * Each Receive WR requires only one receive SGE, no matter how large the inline threshold is. This helps the server-side NFS/RDMA transport operate on less capable RDMA devices. * The Receive buffer is left allocated and mapped all the time. This relieves svc_rdma_post_recv from the overhead of allocating and DMA-mapping a fresh buffer. * svc_rdma_wc_receive no longer has to DMA unmap the Receive buffer. It has to DMA sync only the number of bytes that were received. * svc_rdma_build_arg_xdr no longer has to free a page in rq_pages for each page in the Receive buffer, making it a constant-time function. * The Receive buffer is now plugged directly into the rq_arg's head[0].iov_vec, and can be larger than a page without spilling over into rq_arg's page list. This enables simplification of the RDMA Read path in subsequent patches. Signed-off-by: Chuck Lever Signed-off-by: J. Bruce Fields --- include/linux/sunrpc/svc_rdma.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sunrpc/svc_rdma.h b/include/linux/sunrpc/svc_rdma.h index f0bd0b6d8931..01baabfb863b 100644 --- a/include/linux/sunrpc/svc_rdma.h +++ b/include/linux/sunrpc/svc_rdma.h @@ -148,12 +148,12 @@ struct svc_rdma_recv_ctxt { struct list_head rc_list; struct ib_recv_wr rc_recv_wr; struct ib_cqe rc_cqe; + struct ib_sge rc_recv_sge; + void *rc_recv_buf; struct xdr_buf rc_arg; u32 rc_byte_len; unsigned int rc_page_count; unsigned int rc_hdr_count; - struct ib_sge rc_sges[1 + - RPCRDMA_MAX_INLINE_THRESH / PAGE_SIZE]; struct page *rc_pages[RPCSVC_MAXPAGES]; }; -- cgit v1.2.3 From eb5d7a622e0bbe3fd316b2325d3840a0e030a3c4 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Mon, 7 May 2018 15:27:48 -0400 Subject: svcrdma: Allocate recv_ctxt's on CPU handling Receives There is a significant latency penalty when processing an ingress Receive if the Receive buffer resides in memory that is not on the same NUMA node as the the CPU handling completions for a CQ. The system administrator and the device driver determine which CPU handles completions. This CPU does not change during life of the CQ. Further the Upper Layer does not have any visibility of which CPU it is. Allocating Receive buffers in the Receive completion handler guarantees that Receive buffers are allocated on the preferred NUMA node for that CQ. Signed-off-by: Chuck Lever Signed-off-by: J. Bruce Fields --- include/linux/sunrpc/svc_rdma.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/sunrpc/svc_rdma.h b/include/linux/sunrpc/svc_rdma.h index 01baabfb863b..27cf59c7085f 100644 --- a/include/linux/sunrpc/svc_rdma.h +++ b/include/linux/sunrpc/svc_rdma.h @@ -151,6 +151,7 @@ struct svc_rdma_recv_ctxt { struct ib_sge rc_recv_sge; void *rc_recv_buf; struct xdr_buf rc_arg; + bool rc_temp; u32 rc_byte_len; unsigned int rc_page_count; unsigned int rc_hdr_count; -- cgit v1.2.3 From f016f305f98159a9131ce200ed3b4ed92133012c Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Mon, 7 May 2018 15:27:53 -0400 Subject: svcrdma: Refactor svc_rdma_dma_map_buf Clean up: svc_rdma_dma_map_buf does mostly the same thing as svc_rdma_dma_map_page, so let's fold these together. Signed-off-by: Chuck Lever Signed-off-by: J. Bruce Fields --- include/linux/sunrpc/svc_rdma.h | 7 ------- 1 file changed, 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sunrpc/svc_rdma.h b/include/linux/sunrpc/svc_rdma.h index 27cf59c7085f..95530bc7bfab 100644 --- a/include/linux/sunrpc/svc_rdma.h +++ b/include/linux/sunrpc/svc_rdma.h @@ -158,13 +158,6 @@ struct svc_rdma_recv_ctxt { struct page *rc_pages[RPCSVC_MAXPAGES]; }; -/* Track DMA maps for this transport and context */ -static inline void svc_rdma_count_mappings(struct svcxprt_rdma *rdma, - struct svc_rdma_op_ctxt *ctxt) -{ - ctxt->mapped_sges++; -} - /* svc_rdma_backchannel.c */ extern int svc_rdma_handle_bc_reply(struct rpc_xprt *xprt, __be32 *rdma_resp, -- cgit v1.2.3 From 232627905f12a05df75853c62451ce0886803cee Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Mon, 7 May 2018 15:27:59 -0400 Subject: svcrdma: Clean up Send SGE accounting Clean up: Since there's already a svc_rdma_op_ctxt being passed around with the running count of mapped SGEs, drop unneeded parameters to svc_rdma_post_send_wr(). Signed-off-by: Chuck Lever Signed-off-by: J. Bruce Fields --- include/linux/sunrpc/svc_rdma.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/sunrpc/svc_rdma.h b/include/linux/sunrpc/svc_rdma.h index 95530bc7bfab..8827b4e36c3c 100644 --- a/include/linux/sunrpc/svc_rdma.h +++ b/include/linux/sunrpc/svc_rdma.h @@ -188,7 +188,7 @@ extern int svc_rdma_map_reply_hdr(struct svcxprt_rdma *rdma, __be32 *rdma_resp, unsigned int len); extern int svc_rdma_post_send_wr(struct svcxprt_rdma *rdma, struct svc_rdma_op_ctxt *ctxt, - int num_sge, u32 inv_rkey); + u32 inv_rkey); extern int svc_rdma_sendto(struct svc_rqst *); /* svc_rdma_transport.c */ -- cgit v1.2.3 From 4201c7464753827803366b40e82eb050c04ebdef Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Mon, 7 May 2018 15:28:04 -0400 Subject: svcrdma: Introduce svc_rdma_send_ctxt svc_rdma_op_ctxt's are pre-allocated and maintained on a per-xprt free list. This eliminates the overhead of calling kmalloc / kfree, both of which grab a globally shared lock that disables interrupts. Introduce a replacement to svc_rdma_op_ctxt's that is built especially for the svcrdma Send path. Subsequent patches will take advantage of this new structure by allocating real resources which are then cached in these objects. The allocations are freed when the transport is torn down. I've renamed the structure so that static type checking can be used to ensure that uses of op_ctxt and send_ctxt are not confused. As an additional clean up, structure fields are renamed to conform with kernel coding conventions. Additional clean ups: - Handle svc_rdma_send_ctxt_get allocation failure at each call site, rather than pre-allocating and hoping we guessed correctly - All send_ctxt_put call-sites request page freeing, so remove the @free_pages argument - All send_ctxt_put call-sites unmap SGEs, so fold that into svc_rdma_send_ctxt_put Signed-off-by: Chuck Lever Signed-off-by: J. Bruce Fields --- include/linux/sunrpc/svc_rdma.h | 35 +++++++++++++++++++++++------------ 1 file changed, 23 insertions(+), 12 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sunrpc/svc_rdma.h b/include/linux/sunrpc/svc_rdma.h index 8827b4e36c3c..d3e2bb331264 100644 --- a/include/linux/sunrpc/svc_rdma.h +++ b/include/linux/sunrpc/svc_rdma.h @@ -109,8 +109,8 @@ struct svcxprt_rdma { struct ib_pd *sc_pd; - spinlock_t sc_ctxt_lock; - struct list_head sc_ctxts; + spinlock_t sc_send_lock; + struct list_head sc_send_ctxts; int sc_ctxt_used; spinlock_t sc_rw_ctxt_lock; struct list_head sc_rw_ctxts; @@ -158,6 +158,19 @@ struct svc_rdma_recv_ctxt { struct page *rc_pages[RPCSVC_MAXPAGES]; }; +enum { + RPCRDMA_MAX_SGES = 1 + (RPCRDMA_MAX_INLINE_THRESH / PAGE_SIZE), +}; + +struct svc_rdma_send_ctxt { + struct list_head sc_list; + struct ib_send_wr sc_send_wr; + struct ib_cqe sc_cqe; + int sc_page_count; + struct page *sc_pages[RPCSVC_MAXPAGES]; + struct ib_sge sc_sges[RPCRDMA_MAX_SGES]; +}; + /* svc_rdma_backchannel.c */ extern int svc_rdma_handle_bc_reply(struct rpc_xprt *xprt, __be32 *rdma_resp, @@ -183,24 +196,22 @@ extern int svc_rdma_send_reply_chunk(struct svcxprt_rdma *rdma, struct xdr_buf *xdr); /* svc_rdma_sendto.c */ +extern void svc_rdma_send_ctxts_destroy(struct svcxprt_rdma *rdma); +extern struct svc_rdma_send_ctxt * + svc_rdma_send_ctxt_get(struct svcxprt_rdma *rdma); +extern void svc_rdma_send_ctxt_put(struct svcxprt_rdma *rdma, + struct svc_rdma_send_ctxt *ctxt); +extern int svc_rdma_send(struct svcxprt_rdma *rdma, struct ib_send_wr *wr); extern int svc_rdma_map_reply_hdr(struct svcxprt_rdma *rdma, - struct svc_rdma_op_ctxt *ctxt, + struct svc_rdma_send_ctxt *ctxt, __be32 *rdma_resp, unsigned int len); extern int svc_rdma_post_send_wr(struct svcxprt_rdma *rdma, - struct svc_rdma_op_ctxt *ctxt, + struct svc_rdma_send_ctxt *ctxt, u32 inv_rkey); extern int svc_rdma_sendto(struct svc_rqst *); /* svc_rdma_transport.c */ -extern void svc_rdma_wc_send(struct ib_cq *, struct ib_wc *); -extern void svc_rdma_wc_reg(struct ib_cq *, struct ib_wc *); -extern void svc_rdma_wc_read(struct ib_cq *, struct ib_wc *); -extern void svc_rdma_wc_inv(struct ib_cq *, struct ib_wc *); -extern int svc_rdma_send(struct svcxprt_rdma *, struct ib_send_wr *); extern int svc_rdma_create_listen(struct svc_serv *, int, struct sockaddr *); -extern struct svc_rdma_op_ctxt *svc_rdma_get_context(struct svcxprt_rdma *); -extern void svc_rdma_put_context(struct svc_rdma_op_ctxt *, int); -extern void svc_rdma_unmap_dma(struct svc_rdma_op_ctxt *ctxt); extern void svc_sq_reap(struct svcxprt_rdma *); extern void svc_rq_reap(struct svcxprt_rdma *); extern void svc_rdma_prep_reply_hdr(struct svc_rqst *); -- cgit v1.2.3 From 25fd86eca11c26bad2aede6dd4709ff58f89c7cb Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Mon, 7 May 2018 15:28:09 -0400 Subject: svcrdma: Don't overrun the SGE array in svc_rdma_send_ctxt Receive buffers are always the same size, but each Send WR has a variable number of SGEs, based on the contents of the xdr_buf being sent. While assembling a Send WR, keep track of the number of SGEs so that we don't exceed the device's maximum, or walk off the end of the Send SGE array. For now the Send path just fails if it exceeds the maximum. The current logic in svc_rdma_accept bases the maximum number of Send SGEs on the largest NFS request that can be sent or received. In the transport layer, the limit is actually based on the capabilities of the underlying device, not on properties of the Upper Layer Protocol. Signed-off-by: Chuck Lever Signed-off-by: J. Bruce Fields --- include/linux/sunrpc/svc_rdma.h | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sunrpc/svc_rdma.h b/include/linux/sunrpc/svc_rdma.h index d3e2bb331264..bfb8824e31e1 100644 --- a/include/linux/sunrpc/svc_rdma.h +++ b/include/linux/sunrpc/svc_rdma.h @@ -96,7 +96,7 @@ struct svcxprt_rdma { struct rdma_cm_id *sc_cm_id; /* RDMA connection id */ struct list_head sc_accept_q; /* Conn. waiting accept */ int sc_ord; /* RDMA read limit */ - int sc_max_sge; + int sc_max_send_sges; bool sc_snd_w_inv; /* OK to use Send With Invalidate */ atomic_t sc_sq_avail; /* SQEs ready to be consumed */ @@ -158,17 +158,14 @@ struct svc_rdma_recv_ctxt { struct page *rc_pages[RPCSVC_MAXPAGES]; }; -enum { - RPCRDMA_MAX_SGES = 1 + (RPCRDMA_MAX_INLINE_THRESH / PAGE_SIZE), -}; - struct svc_rdma_send_ctxt { struct list_head sc_list; struct ib_send_wr sc_send_wr; struct ib_cqe sc_cqe; int sc_page_count; + int sc_cur_sge_no; struct page *sc_pages[RPCSVC_MAXPAGES]; - struct ib_sge sc_sges[RPCRDMA_MAX_SGES]; + struct ib_sge sc_sges[]; }; /* svc_rdma_backchannel.c */ -- cgit v1.2.3 From 986b78894b268f605e9ea055b99959bdce0e5945 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Mon, 7 May 2018 15:28:15 -0400 Subject: svcrdma: Remove post_send_wr Clean up: Now that the send_wr is part of the svc_rdma_send_ctxt, svc_rdma_post_send_wr is nearly empty. Signed-off-by: Chuck Lever Signed-off-by: J. Bruce Fields --- include/linux/sunrpc/svc_rdma.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sunrpc/svc_rdma.h b/include/linux/sunrpc/svc_rdma.h index bfb8824e31e1..a8bfc214614b 100644 --- a/include/linux/sunrpc/svc_rdma.h +++ b/include/linux/sunrpc/svc_rdma.h @@ -202,9 +202,6 @@ extern int svc_rdma_send(struct svcxprt_rdma *rdma, struct ib_send_wr *wr); extern int svc_rdma_map_reply_hdr(struct svcxprt_rdma *rdma, struct svc_rdma_send_ctxt *ctxt, __be32 *rdma_resp, unsigned int len); -extern int svc_rdma_post_send_wr(struct svcxprt_rdma *rdma, - struct svc_rdma_send_ctxt *ctxt, - u32 inv_rkey); extern int svc_rdma_sendto(struct svc_rqst *); /* svc_rdma_transport.c */ -- cgit v1.2.3 From 99722fe4d5a634707ced8d8f42b883b87a86b3c5 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Mon, 7 May 2018 15:28:25 -0400 Subject: svcrdma: Persistently allocate and DMA-map Send buffers While sending each RPC Reply, svc_rdma_sendto allocates and DMA- maps a separate buffer where the RPC/RDMA transport header is constructed. The buffer is unmapped and released in the Send completion handler. This is significant per-RPC overhead, especially for small RPCs. Instead, allocate and DMA-map a buffer, and cache it in each svc_rdma_send_ctxt. This buffer and its mapping can be re-used for each RPC, saving the cost of memory allocation and DMA mapping. Signed-off-by: Chuck Lever Signed-off-by: J. Bruce Fields --- include/linux/sunrpc/svc_rdma.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sunrpc/svc_rdma.h b/include/linux/sunrpc/svc_rdma.h index a8bfc214614b..96b14a72d359 100644 --- a/include/linux/sunrpc/svc_rdma.h +++ b/include/linux/sunrpc/svc_rdma.h @@ -162,6 +162,7 @@ struct svc_rdma_send_ctxt { struct list_head sc_list; struct ib_send_wr sc_send_wr; struct ib_cqe sc_cqe; + void *sc_xprt_buf; int sc_page_count; int sc_cur_sge_no; struct page *sc_pages[RPCSVC_MAXPAGES]; @@ -199,9 +200,12 @@ extern struct svc_rdma_send_ctxt * extern void svc_rdma_send_ctxt_put(struct svcxprt_rdma *rdma, struct svc_rdma_send_ctxt *ctxt); extern int svc_rdma_send(struct svcxprt_rdma *rdma, struct ib_send_wr *wr); -extern int svc_rdma_map_reply_hdr(struct svcxprt_rdma *rdma, +extern void svc_rdma_sync_reply_hdr(struct svcxprt_rdma *rdma, + struct svc_rdma_send_ctxt *ctxt, + unsigned int len); +extern int svc_rdma_map_reply_msg(struct svcxprt_rdma *rdma, struct svc_rdma_send_ctxt *ctxt, - __be32 *rdma_resp, unsigned int len); + struct xdr_buf *xdr, __be32 *wr_lst); extern int svc_rdma_sendto(struct svc_rqst *); /* svc_rdma_transport.c */ -- cgit v1.2.3 From 51cc257a1186f69dbb6faec1bd48cc7e1fc31079 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Mon, 7 May 2018 15:28:31 -0400 Subject: svcrdma: Remove unused svc_rdma_op_ctxt Clean up: Eliminate a structure that is no longer used. Signed-off-by: Chuck Lever Signed-off-by: J. Bruce Fields --- include/linux/sunrpc/svc_rdma.h | 21 --------------------- 1 file changed, 21 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sunrpc/svc_rdma.h b/include/linux/sunrpc/svc_rdma.h index 96b14a72d359..fd78f78df5c6 100644 --- a/include/linux/sunrpc/svc_rdma.h +++ b/include/linux/sunrpc/svc_rdma.h @@ -71,26 +71,6 @@ extern atomic_t rdma_stat_rq_prod; extern atomic_t rdma_stat_sq_poll; extern atomic_t rdma_stat_sq_prod; -/* - * Contexts are built when an RDMA request is created and are a - * record of the resources that can be recovered when the request - * completes. - */ -struct svc_rdma_op_ctxt { - struct list_head list; - struct xdr_buf arg; - struct ib_cqe cqe; - u32 byte_len; - struct svcxprt_rdma *xprt; - enum dma_data_direction direction; - int count; - unsigned int mapped_sges; - int hdr_count; - struct ib_send_wr send_wr; - struct ib_sge sge[1 + RPCRDMA_MAX_INLINE_THRESH / PAGE_SIZE]; - struct page *pages[RPCSVC_MAXPAGES]; -}; - struct svcxprt_rdma { struct svc_xprt sc_xprt; /* SVC transport structure */ struct rdma_cm_id *sc_cm_id; /* RDMA connection id */ @@ -111,7 +91,6 @@ struct svcxprt_rdma { spinlock_t sc_send_lock; struct list_head sc_send_ctxts; - int sc_ctxt_used; spinlock_t sc_rw_ctxt_lock; struct list_head sc_rw_ctxts; -- cgit v1.2.3 From c06c4d793584b965bf5fa3fb107f6279643574e2 Mon Sep 17 00:00:00 2001 From: Brian Masney Date: Thu, 10 May 2018 20:12:23 -0400 Subject: staging: iio: tsl2x7x/tsl2772: move out of staging Move the tsl2772 driver out of staging and into mainline. Signed-off-by: Brian Masney Signed-off-by: Jonathan Cameron --- include/linux/platform_data/tsl2772.h | 101 ++++++++++++++++++++++++++++++++++ 1 file changed, 101 insertions(+) create mode 100644 include/linux/platform_data/tsl2772.h (limited to 'include/linux') diff --git a/include/linux/platform_data/tsl2772.h b/include/linux/platform_data/tsl2772.h new file mode 100644 index 000000000000..f8ade15a35e2 --- /dev/null +++ b/include/linux/platform_data/tsl2772.h @@ -0,0 +1,101 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Device driver for monitoring ambient light intensity (lux) + * and proximity (prox) within the TAOS TSL2772 family of devices. + * + * Copyright (c) 2012, TAOS Corporation. + * Copyright (c) 2017-2018 Brian Masney + */ + +#ifndef __TSL2772_H +#define __TSL2772_H + +struct tsl2772_lux { + unsigned int ch0; + unsigned int ch1; +}; + +/* Max number of segments allowable in LUX table */ +#define TSL2772_MAX_LUX_TABLE_SIZE 6 +/* The default LUX tables all have 3 elements. */ +#define TSL2772_DEF_LUX_TABLE_SZ 3 +#define TSL2772_DEFAULT_TABLE_BYTES (sizeof(struct tsl2772_lux) * \ + TSL2772_DEF_LUX_TABLE_SZ) + +/* Proximity diode to use */ +#define TSL2772_DIODE0 0x01 +#define TSL2772_DIODE1 0x02 +#define TSL2772_DIODE_BOTH 0x03 + +/* LED Power */ +#define TSL2772_100_mA 0x00 +#define TSL2772_50_mA 0x01 +#define TSL2772_25_mA 0x02 +#define TSL2772_13_mA 0x03 + +/** + * struct tsl2772_settings - Settings for the tsl2772 driver + * @als_time: Integration time of the ALS channel ADCs in 2.73 ms + * increments. Total integration time is + * (256 - als_time) * 2.73. + * @als_gain: Index into the tsl2772_als_gain array. + * @als_gain_trim: Default gain trim to account for aperture effects. + * @wait_time: Time between proximity and ALS cycles in 2.73 + * periods. + * @prox_time: Integration time of the proximity ADC in 2.73 ms + * increments. Total integration time is + * (256 - prx_time) * 2.73. + * @prox_gain: Index into the tsl2772_prx_gain array. + * @als_prox_config: The value of the ALS / Proximity configuration + * register. + * @als_cal_target: Known external ALS reading for calibration. + * @als_persistence: H/W Filters, Number of 'out of limits' ALS readings. + * @als_interrupt_en: Enable/Disable ALS interrupts + * @als_thresh_low: CH0 'low' count to trigger interrupt. + * @als_thresh_high: CH0 'high' count to trigger interrupt. + * @prox_persistence: H/W Filters, Number of 'out of limits' proximity + * readings. + * @prox_interrupt_en: Enable/Disable proximity interrupts. + * @prox_thres_low: Low threshold proximity detection. + * @prox_thres_high: High threshold proximity detection. + * @prox_pulse_count: Number if proximity emitter pulses. + * @prox_max_samples_cal: The number of samples that are taken when performing + * a proximity calibration. + * @prox_diode Which diode(s) to use for driving the external + * LED(s) for proximity sensing. + * @prox_power The amount of power to use for the external LED(s). + */ +struct tsl2772_settings { + int als_time; + int als_gain; + int als_gain_trim; + int wait_time; + int prox_time; + int prox_gain; + int als_prox_config; + int als_cal_target; + u8 als_persistence; + bool als_interrupt_en; + int als_thresh_low; + int als_thresh_high; + u8 prox_persistence; + bool prox_interrupt_en; + int prox_thres_low; + int prox_thres_high; + int prox_pulse_count; + int prox_max_samples_cal; + int prox_diode; + int prox_power; +}; + +/** + * struct tsl2772_platform_data - Platform callback, glass and defaults + * @platform_lux_table: Device specific glass coefficents + * @platform_default_settings: Device specific power on defaults + */ +struct tsl2772_platform_data { + struct tsl2772_lux platform_lux_table[TSL2772_MAX_LUX_TABLE_SIZE]; + struct tsl2772_settings *platform_default_settings; +}; + +#endif /* __TSL2772_H */ -- cgit v1.2.3 From 98004a78bb6cf18c260cecb49cb01e36cf6a72be Mon Sep 17 00:00:00 2001 From: Vadim Pasternak Date: Tue, 27 Mar 2018 10:02:01 +0000 Subject: platform_data/mlxreg: Document fixes for hotplug device Remove redunadant description of label in struct mlxreg_hotplug_device. Change location of access_mode in struct mlxreg_hotplug_device. Signed-off-by: Vadim Pasternak Signed-off-by: Darren Hart (VMware) --- include/linux/platform_data/mlxreg.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/platform_data/mlxreg.h b/include/linux/platform_data/mlxreg.h index 2744cff1b297..19f5cb618c55 100644 --- a/include/linux/platform_data/mlxreg.h +++ b/include/linux/platform_data/mlxreg.h @@ -58,11 +58,10 @@ struct mlxreg_hotplug_device { * struct mlxreg_core_data - attributes control data: * * @label: attribute label; - * @label: attribute register offset; * @reg: attribute register; * @mask: attribute access mask; - * @mode: access mode; * @bit: attribute effective bit; + * @mode: access mode; * @np - pointer to node platform associated with attribute; * @hpdev - hotplug device data; * @health_cntr: dynamic device health indication counter; -- cgit v1.2.3 From e7deb3c7741eaa558458696e55f57141886fcc5c Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 14 May 2018 15:47:30 +0200 Subject: drm: shmobile: remove unused MERAM support Since commit a521422ea4ae ("ARM: shmobile: mackerel: Remove Legacy C board code") MERAM functionality is unused. Remove it. Reviewed-by: Simon Horman Cc: Geert Uytterhoeven Acked-by: Laurent Pinchart Acked-by: Daniel Vetter Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/platform_data/shmob_drm.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/platform_data/shmob_drm.h b/include/linux/platform_data/shmob_drm.h index 7c686d335c12..ee495d707f17 100644 --- a/include/linux/platform_data/shmob_drm.h +++ b/include/linux/platform_data/shmob_drm.h @@ -18,9 +18,6 @@ #include -struct sh_mobile_meram_cfg; -struct sh_mobile_meram_info; - enum shmob_drm_clk_source { SHMOB_DRM_CLK_BUS, SHMOB_DRM_CLK_PERIPHERAL, @@ -93,7 +90,6 @@ struct shmob_drm_platform_data { struct shmob_drm_interface_data iface; struct shmob_drm_panel_data panel; struct shmob_drm_backlight_data backlight; - const struct sh_mobile_meram_cfg *meram; }; #endif /* __SHMOB_DRM_H__ */ -- cgit v1.2.3 From 4fad8868afe7b168c34fab3d959d875f4f8b3624 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Sun, 25 Mar 2018 14:49:01 +0200 Subject: i2c: Get rid of i2c_board_info->archdata The only user of i2c_board_info->archdata is the OF parsing code and it just pass a zero-initialized object which has the same effect as leaving ->archdata to NULL since the client object is allocated with kzalloc(). Get rid of this useless field. Signed-off-by: Boris Brezillon Signed-off-by: Wolfram Sang --- include/linux/i2c.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 44ad14e016b5..aeb655772ef8 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -394,7 +394,6 @@ static inline bool i2c_detect_slave_mode(struct device *dev) { return false; } * @addr: stored in i2c_client.addr * @dev_name: Overrides the default - dev_name if set * @platform_data: stored in i2c_client.dev.platform_data - * @archdata: copied into i2c_client.dev.archdata * @of_node: pointer to OpenFirmware device node * @fwnode: device node supplied by the platform firmware * @properties: additional device properties for the device @@ -419,7 +418,6 @@ struct i2c_board_info { unsigned short addr; const char *dev_name; void *platform_data; - struct dev_archdata *archdata; struct device_node *of_node; struct fwnode_handle *fwnode; const struct property_entry *properties; -- cgit v1.2.3 From ab96746aaa344fb720a198245a837e266fad3b62 Mon Sep 17 00:00:00 2001 From: Lu Baolu Date: Fri, 4 May 2018 13:08:18 +0800 Subject: iommu/vt-d: Clean up pasid quirk for pre-production devices The pasid28 quirk is needed only for some pre-production devices. Remove it to make the code concise. Signed-off-by: Ashok Raj Signed-off-by: Lu Baolu Signed-off-by: Joerg Roedel --- include/linux/intel-iommu.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h index ef169d67df92..1df940196ab2 100644 --- a/include/linux/intel-iommu.h +++ b/include/linux/intel-iommu.h @@ -121,7 +121,6 @@ #define ecap_srs(e) ((e >> 31) & 0x1) #define ecap_ers(e) ((e >> 30) & 0x1) #define ecap_prs(e) ((e >> 29) & 0x1) -#define ecap_broken_pasid(e) ((e >> 28) & 0x1) #define ecap_dis(e) ((e >> 27) & 0x1) #define ecap_nest(e) ((e >> 26) & 0x1) #define ecap_mts(e) ((e >> 25) & 0x1) -- cgit v1.2.3 From c6d24c324e78a71e55af4e00de014cf0e0524dcb Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 4 May 2018 04:13:45 +0300 Subject: lib/string_helpers: Add missed declaration of struct task_struct Starting from the commit 0d0443288f22 the new function has been introduced which takes struct task_struct as a parameter. Though, compiler doesn't know where to get information about it at this stage. Add missed declaration of struct task_struct to satisfy compiler. Fixes: 0d0443288f22 ("string_helpers: add kstrdup_quotable_cmdline") Cc: Kees Cook Cc: James Morris Signed-off-by: Andy Shevchenko Acked-by: Kees Cook --- include/linux/string_helpers.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/string_helpers.h b/include/linux/string_helpers.h index 4397c52ec4a4..d23c5030901a 100644 --- a/include/linux/string_helpers.h +++ b/include/linux/string_helpers.h @@ -5,6 +5,7 @@ #include struct file; +struct task_struct; /* Descriptions of the types of units to * print in */ -- cgit v1.2.3 From 0c6609805b638debcb7d9d44556546b043ded2e9 Mon Sep 17 00:00:00 2001 From: Fabrice Gasnier Date: Wed, 16 May 2018 09:35:57 +0200 Subject: mfd: stm32-timers: Add support for DMAs STM32 Timers can support up to 7 DMA requests: - 4 channels, update, compare and trigger. Optionally request part, or all DMAs from stm32-timers MFD core. Also add routine to implement burst reads using DMA from timer registers. This is exported. So, it can be used by child drivers, PWM capture for instance (but not limited to). Signed-off-by: Fabrice Gasnier Reviewed-by: Benjamin Gaignard Signed-off-by: Lee Jones --- include/linux/mfd/stm32-timers.h | 46 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 46 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/stm32-timers.h b/include/linux/mfd/stm32-timers.h index 2aadab6f34a1..9596d5c58859 100644 --- a/include/linux/mfd/stm32-timers.h +++ b/include/linux/mfd/stm32-timers.h @@ -8,6 +8,8 @@ #define _LINUX_STM32_GPTIMER_H_ #include +#include +#include #include #define TIM_CR1 0x00 /* Control Register 1 */ @@ -27,6 +29,8 @@ #define TIM_CCR3 0x3C /* Capt/Comp Register 3 */ #define TIM_CCR4 0x40 /* Capt/Comp Register 4 */ #define TIM_BDTR 0x44 /* Break and Dead-Time Reg */ +#define TIM_DCR 0x48 /* DMA control register */ +#define TIM_DMAR 0x4C /* DMA register for transfer */ #define TIM_CR1_CEN BIT(0) /* Counter Enable */ #define TIM_CR1_DIR BIT(4) /* Counter Direction */ @@ -36,6 +40,13 @@ #define TIM_SMCR_SMS (BIT(0) | BIT(1) | BIT(2)) /* Slave mode selection */ #define TIM_SMCR_TS (BIT(4) | BIT(5) | BIT(6)) /* Trigger selection */ #define TIM_DIER_UIE BIT(0) /* Update interrupt */ +#define TIM_DIER_UDE BIT(8) /* Update DMA request Enable */ +#define TIM_DIER_CC1DE BIT(9) /* CC1 DMA request Enable */ +#define TIM_DIER_CC2DE BIT(10) /* CC2 DMA request Enable */ +#define TIM_DIER_CC3DE BIT(11) /* CC3 DMA request Enable */ +#define TIM_DIER_CC4DE BIT(12) /* CC4 DMA request Enable */ +#define TIM_DIER_COMDE BIT(13) /* COM DMA request Enable */ +#define TIM_DIER_TDE BIT(14) /* Trigger DMA request Enable */ #define TIM_SR_UIF BIT(0) /* Update interrupt flag */ #define TIM_EGR_UG BIT(0) /* Update Generation */ #define TIM_CCMR_PE BIT(3) /* Channel Preload Enable */ @@ -56,6 +67,8 @@ #define TIM_BDTR_BK2F (BIT(20) | BIT(21) | BIT(22) | BIT(23)) #define TIM_BDTR_BK2E BIT(24) /* Break 2 input enable */ #define TIM_BDTR_BK2P BIT(25) /* Break 2 input polarity */ +#define TIM_DCR_DBA GENMASK(4, 0) /* DMA base addr */ +#define TIM_DCR_DBL GENMASK(12, 8) /* DMA burst len */ #define MAX_TIM_PSC 0xFFFF #define TIM_CR2_MMS_SHIFT 4 @@ -65,9 +78,42 @@ #define TIM_BDTR_BKF_SHIFT 16 #define TIM_BDTR_BK2F_SHIFT 20 +enum stm32_timers_dmas { + STM32_TIMERS_DMA_CH1, + STM32_TIMERS_DMA_CH2, + STM32_TIMERS_DMA_CH3, + STM32_TIMERS_DMA_CH4, + STM32_TIMERS_DMA_UP, + STM32_TIMERS_DMA_TRIG, + STM32_TIMERS_DMA_COM, + STM32_TIMERS_MAX_DMAS, +}; + +/** + * struct stm32_timers_dma - STM32 timer DMA handling. + * @completion: end of DMA transfer completion + * @phys_base: control registers physical base address + * @lock: protect DMA access + * @chan: DMA channel in use + * @chans: DMA channels available for this timer instance + */ +struct stm32_timers_dma { + struct completion completion; + phys_addr_t phys_base; + struct mutex lock; + struct dma_chan *chan; + struct dma_chan *chans[STM32_TIMERS_MAX_DMAS]; +}; + struct stm32_timers { struct clk *clk; struct regmap *regmap; u32 max_arr; + struct stm32_timers_dma dma; /* Only to be used by the parent */ }; + +int stm32_timers_dma_burst_read(struct device *dev, u32 *buf, + enum stm32_timers_dmas id, u32 reg, + unsigned int num_reg, unsigned int bursts, + unsigned long tmo_ms); #endif -- cgit v1.2.3 From 53e38fe73f941291fd20794c15c3bb7b104a4a17 Mon Sep 17 00:00:00 2001 From: Fabrice Gasnier Date: Wed, 16 May 2018 09:35:58 +0200 Subject: pwm: stm32: Add capture support Add support for PMW input mode on pwm-stm32. STM32 timers support period and duty cycle capture as long as they have at least two PWM channels. One capture channel is used for period (rising-edge), one for duty-cycle (falling-edge). When there's only one channel available, only period can be captured. Duty-cycle is simply zero'ed in such a case. Capture requires exclusive access (e.g. no pwm output running at the same time, to protect common prescaler). Timer DMA burst mode (from MFD core) is being used, to take two snapshots of capture registers (upon each period rising edge). Signed-off-by: Fabrice Gasnier Reviewed-by: Benjamin Gaignard Acked-by: Thierry Reding Signed-off-by: Lee Jones --- include/linux/mfd/stm32-timers.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/stm32-timers.h b/include/linux/mfd/stm32-timers.h index 9596d5c58859..d46f5500928e 100644 --- a/include/linux/mfd/stm32-timers.h +++ b/include/linux/mfd/stm32-timers.h @@ -51,13 +51,24 @@ #define TIM_EGR_UG BIT(0) /* Update Generation */ #define TIM_CCMR_PE BIT(3) /* Channel Preload Enable */ #define TIM_CCMR_M1 (BIT(6) | BIT(5)) /* Channel PWM Mode 1 */ +#define TIM_CCMR_CC1S (BIT(0) | BIT(1)) /* Capture/compare 1 sel */ +#define TIM_CCMR_IC1PSC GENMASK(3, 2) /* Input capture 1 prescaler */ +#define TIM_CCMR_CC2S (BIT(8) | BIT(9)) /* Capture/compare 2 sel */ +#define TIM_CCMR_IC2PSC GENMASK(11, 10) /* Input capture 2 prescaler */ +#define TIM_CCMR_CC1S_TI1 BIT(0) /* IC1/IC3 selects TI1/TI3 */ +#define TIM_CCMR_CC1S_TI2 BIT(1) /* IC1/IC3 selects TI2/TI4 */ +#define TIM_CCMR_CC2S_TI2 BIT(8) /* IC2/IC4 selects TI2/TI4 */ +#define TIM_CCMR_CC2S_TI1 BIT(9) /* IC2/IC4 selects TI1/TI3 */ #define TIM_CCER_CC1E BIT(0) /* Capt/Comp 1 out Ena */ #define TIM_CCER_CC1P BIT(1) /* Capt/Comp 1 Polarity */ #define TIM_CCER_CC1NE BIT(2) /* Capt/Comp 1N out Ena */ #define TIM_CCER_CC1NP BIT(3) /* Capt/Comp 1N Polarity */ #define TIM_CCER_CC2E BIT(4) /* Capt/Comp 2 out Ena */ +#define TIM_CCER_CC2P BIT(5) /* Capt/Comp 2 Polarity */ #define TIM_CCER_CC3E BIT(8) /* Capt/Comp 3 out Ena */ +#define TIM_CCER_CC3P BIT(9) /* Capt/Comp 3 Polarity */ #define TIM_CCER_CC4E BIT(12) /* Capt/Comp 4 out Ena */ +#define TIM_CCER_CC4P BIT(13) /* Capt/Comp 4 Polarity */ #define TIM_CCER_CCXE (BIT(0) | BIT(4) | BIT(8) | BIT(12)) #define TIM_BDTR_BKE BIT(12) /* Break input enable */ #define TIM_BDTR_BKP BIT(13) /* Break input polarity */ -- cgit v1.2.3 From ab3a897847834bf3e864fb07b733c444895a24ba Mon Sep 17 00:00:00 2001 From: Fabrice Gasnier Date: Wed, 16 May 2018 09:36:00 +0200 Subject: pwm: stm32: Use input prescaler to improve period capture Using input prescaler, capture unit will trigger DMA once every configurable /2, /4 or /8 events (rising edge). This helps improve period (only) capture accuracy at high rates. Signed-off-by: Fabrice Gasnier Reviewed-by: Benjamin Gaignard Acked-by: Thierry Reding Signed-off-by: Lee Jones --- include/linux/mfd/stm32-timers.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mfd/stm32-timers.h b/include/linux/mfd/stm32-timers.h index d46f5500928e..9da1d7ece079 100644 --- a/include/linux/mfd/stm32-timers.h +++ b/include/linux/mfd/stm32-timers.h @@ -82,6 +82,7 @@ #define TIM_DCR_DBL GENMASK(12, 8) /* DMA burst len */ #define MAX_TIM_PSC 0xFFFF +#define MAX_TIM_ICPSC 0x3 #define TIM_CR2_MMS_SHIFT 4 #define TIM_CR2_MMS2_SHIFT 20 #define TIM_SMCR_TS_SHIFT 4 -- cgit v1.2.3 From 30feec093021ef665233a3c78a99f444673389a2 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 9 Jan 2018 19:59:21 +0100 Subject: mfd: syscon: Remove unused Exynos PMU headers Since commit 5812f0106c44 ("phy: exynos4: Remove duplicated defines of PHY register defines") and commit 7a66647b25b6 ("phy: exynos: Use one define for enable bit") all users of syscon Exynos PMU headers (for PHY drivers) are converted to use different headers so these can be removed. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Lee Jones --- include/linux/mfd/syscon/exynos4-pmu.h | 21 --------------------- include/linux/mfd/syscon/exynos5-pmu.h | 19 ------------------- 2 files changed, 40 deletions(-) delete mode 100644 include/linux/mfd/syscon/exynos4-pmu.h delete mode 100644 include/linux/mfd/syscon/exynos5-pmu.h (limited to 'include/linux') diff --git a/include/linux/mfd/syscon/exynos4-pmu.h b/include/linux/mfd/syscon/exynos4-pmu.h deleted file mode 100644 index 278b1b1549e9..000000000000 --- a/include/linux/mfd/syscon/exynos4-pmu.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Copyright (C) 2015 Samsung Electronics Co., Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef _LINUX_MFD_SYSCON_PMU_EXYNOS4_H_ -#define _LINUX_MFD_SYSCON_PMU_EXYNOS4_H_ - -/* Exynos4 PMU register definitions */ - -/* MIPI_PHYn_CONTROL register offset: n = 0..1 */ -#define EXYNOS4_MIPI_PHY_CONTROL(n) (0x710 + (n) * 4) -#define EXYNOS4_MIPI_PHY_ENABLE (1 << 0) -#define EXYNOS4_MIPI_PHY_SRESETN (1 << 1) -#define EXYNOS4_MIPI_PHY_MRESETN (1 << 2) -#define EXYNOS4_MIPI_PHY_RESET_MASK (3 << 1) - -#endif /* _LINUX_MFD_SYSCON_PMU_EXYNOS4_H_ */ diff --git a/include/linux/mfd/syscon/exynos5-pmu.h b/include/linux/mfd/syscon/exynos5-pmu.h deleted file mode 100644 index b4942a32b81d..000000000000 --- a/include/linux/mfd/syscon/exynos5-pmu.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Exynos5 SoC series Power Management Unit (PMU) register offsets - * and bit definitions. - * - * Copyright (C) 2014 Samsung Electronics Co., Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef _LINUX_MFD_SYSCON_PMU_EXYNOS5_H_ -#define _LINUX_MFD_SYSCON_PMU_EXYNOS5_H_ - -#define EXYNOS5_PHY_ENABLE BIT(0) -#define EXYNOS5_MIPI_PHY_S_RESETN BIT(1) -#define EXYNOS5_MIPI_PHY_M_RESETN BIT(2) - -#endif /* _LINUX_MFD_SYSCON_PMU_EXYNOS5_H_ */ -- cgit v1.2.3 From efc9b2048c7f6bb52f70cc84b8b8b8dcc685a0d6 Mon Sep 17 00:00:00 2001 From: Dave Gerlach Date: Thu, 15 Feb 2018 22:17:05 -0600 Subject: mfd: tps65218: Reorder tps65218_regulator_id enum Commit 2dc4940360d4 ("regulator: tps65218: Remove all the compatibles") changes the probe function of drivers/regulator/tps65218-regulator.c so that it iterates through all available regulators and assumes that the regulator IDs are sequential and match the order present in the enum tps65218_regulator_id. However, for some reason the much older commit c0ea88b890d6 ("regulator: tps65218: add support for LS3 current regulator") updated all arrays with LS3 at the end but added it second to last for the enum. Because of this long standing mismatch in order between the tps65218_regulator_id enum and the regulator_desc array in the tps65218 regulator driver, the new probe function causes the strobe values to be associated with the wrong regulator ID. This causes LDO1 to fail to suspend in tps65218_pmic_set_suspend_disable due to not having anything probes for its strobe value. Fix the order in the enum so the probe function works as the update intended. Fixes: 2dc4940360d4 ("regulator: tps65218: Remove all the compatibles") Signed-off-by: Dave Gerlach Signed-off-by: Lee Jones --- include/linux/mfd/tps65218.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/tps65218.h b/include/linux/mfd/tps65218.h index f069c518c0ed..c204d9a79436 100644 --- a/include/linux/mfd/tps65218.h +++ b/include/linux/mfd/tps65218.h @@ -205,10 +205,10 @@ enum tps65218_regulator_id { TPS65218_DCDC_4, TPS65218_DCDC_5, TPS65218_DCDC_6, - /* LS's */ - TPS65218_LS_3, /* LDOs */ TPS65218_LDO_1, + /* LS's */ + TPS65218_LS_3, }; #define TPS65218_MAX_REG_ID TPS65218_LDO_1 -- cgit v1.2.3 From 37c089d1facaf03969f66a5469c169a2c73429f6 Mon Sep 17 00:00:00 2001 From: Rajmohan Mani Date: Tue, 20 Feb 2018 15:54:07 -0800 Subject: mfd: Update to SPDX license identifier Remove the GPL v2 license boilerplate and update with the SPDX license identifier. Signed-off-by: Rajmohan Mani Signed-off-by: Lee Jones --- include/linux/mfd/tps68470.h | 17 +++-------------- 1 file changed, 3 insertions(+), 14 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/tps68470.h b/include/linux/mfd/tps68470.h index 44f9d9f647ed..ffe81127d91c 100644 --- a/include/linux/mfd/tps68470.h +++ b/include/linux/mfd/tps68470.h @@ -1,17 +1,6 @@ -/* - * Copyright (c) 2017 Intel Corporation - * - * Functions to access TPS68470 power management chip. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (C) 2017 Intel Corporation */ +/* Functions to access TPS68470 power management chip. */ #ifndef __LINUX_MFD_TPS68470_H #define __LINUX_MFD_TPS68470_H -- cgit v1.2.3 From 99fb0f25c448ab72481bd700b66e0e48c583ef5a Mon Sep 17 00:00:00 2001 From: Wenkai Du Date: Thu, 22 Feb 2018 13:30:52 -0800 Subject: Revert "mfd: cros_ec: Add ACPI GPE handler for LID0 devices" This reverts commit e04653a9dcf4d98defe2149c885382e5cc72082f. It is no longer needed to install Chrome EC GPE handler to have GPE enabled in suspend to idle path. It is found that with this handler installed, EC wake up doesn't work because default EC event handler that can wake up system is not getting called. Signed-off-by: Wenkai Du Acked-by: Benson Leung Signed-off-by: Lee Jones --- include/linux/mfd/cros_ec.h | 18 ------------------ 1 file changed, 18 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h index 2d4e23c9ea0a..4ff0cec979b0 100644 --- a/include/linux/mfd/cros_ec.h +++ b/include/linux/mfd/cros_ec.h @@ -328,22 +328,4 @@ extern struct attribute_group cros_ec_vbc_attr_group; int cros_ec_debugfs_init(struct cros_ec_dev *ec); void cros_ec_debugfs_remove(struct cros_ec_dev *ec); -/* ACPI GPE handler */ -#ifdef CONFIG_ACPI - -int cros_ec_acpi_install_gpe_handler(struct device *dev); -void cros_ec_acpi_remove_gpe_handler(void); -void cros_ec_acpi_clear_gpe(void); - -#else /* CONFIG_ACPI */ - -static inline int cros_ec_acpi_install_gpe_handler(struct device *dev) -{ - return -ENODEV; -} -static inline void cros_ec_acpi_remove_gpe_handler(void) {} -static inline void cros_ec_acpi_clear_gpe(void) {} - -#endif /* CONFIG_ACPI */ - #endif /* __LINUX_MFD_CROS_EC_H */ -- cgit v1.2.3 From c18604660ad02324dfc21de5dfd0c8d15e9070a5 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Mon, 12 Mar 2018 15:52:00 +0000 Subject: mfd: arizona: Update reset pin to use GPIOD Now GPIOD has support for both pdata systems and for non-standard DT bindings the Arizona reset GPIO can be converted to use it. Worth noting gpiod_set_raw_value_cansleep is used to match the behaviour of the old GPIOs. This is because the part is fairly widely used and it is unknown how many DTs are correctly setting active low through device tree, so to avoid breaking any existing users it is best to match the previous behaviour. Signed-off-by: Charles Keepax Reviewed-by: Linus Walleij Signed-off-by: Lee Jones --- include/linux/mfd/arizona/pdata.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mfd/arizona/pdata.h b/include/linux/mfd/arizona/pdata.h index f72dc53848d7..0013075d4cda 100644 --- a/include/linux/mfd/arizona/pdata.h +++ b/include/linux/mfd/arizona/pdata.h @@ -56,6 +56,7 @@ #define ARIZONA_MAX_PDM_SPK 2 struct regulator_init_data; +struct gpio_desc; struct arizona_micbias { int mV; /** Regulated voltage */ @@ -77,7 +78,7 @@ struct arizona_micd_range { }; struct arizona_pdata { - int reset; /** GPIO controlling /RESET, if any */ + struct gpio_desc *reset; /** GPIO controlling /RESET, if any */ /** Regulator configuration for MICVDD */ struct arizona_micsupp_pdata micvdd; -- cgit v1.2.3 From 531a469ead6ad1e79e8c84ffd4787c0747336e5a Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Thu, 29 Mar 2018 12:31:13 +0800 Subject: mfd: axp20x: Constify struct mfd_cell and struct resource The axp20x driver has lots of mfd_cell and resource structs. These can all be const-ified. Signed-off-by: Chen-Yu Tsai Signed-off-by: Lee Jones --- include/linux/mfd/axp20x.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h index 82bf7747b312..a2489363a998 100644 --- a/include/linux/mfd/axp20x.h +++ b/include/linux/mfd/axp20x.h @@ -642,7 +642,7 @@ struct axp20x_dev { struct regmap_irq_chip_data *regmap_irqc; long variant; int nr_cells; - struct mfd_cell *cells; + const struct mfd_cell *cells; const struct regmap_config *regmap_cfg; const struct regmap_irq_chip *regmap_irq_chip; }; -- cgit v1.2.3 From eef2b53a3ec6b1919d32bd722d2f5d33769a1f48 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Thu, 29 Mar 2018 12:31:15 +0800 Subject: mfd: axp20x: Correct AXP806 POK interrupt prefix When AXP806 support was added, POK was incorrectly expanded to PWROK. However, the datasheet lists them as POK[LSNP], which is the same as on the AXP288. Furthermore, the registers associated with POK functions are the same as the PEK on the other AXP PMICs. This suggests that "POK" means "Power On Key", much like "PEK" means "Power Enable Key", instead of "Power OK". This patch changes the "PWROK" prefix to "POK" for these interrupts. Signed-off-by: Chen-Yu Tsai Signed-off-by: Lee Jones --- include/linux/mfd/axp20x.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h index a2489363a998..517e60eecbcb 100644 --- a/include/linux/mfd/axp20x.h +++ b/include/linux/mfd/axp20x.h @@ -592,11 +592,11 @@ enum axp806_irqs { AXP806_IRQ_DCDCC_V_LOW, AXP806_IRQ_DCDCD_V_LOW, AXP806_IRQ_DCDCE_V_LOW, - AXP806_IRQ_PWROK_LONG, - AXP806_IRQ_PWROK_SHORT, + AXP806_IRQ_POK_LONG, + AXP806_IRQ_POK_SHORT, AXP806_IRQ_WAKEUP, - AXP806_IRQ_PWROK_FALL, - AXP806_IRQ_PWROK_RISE, + AXP806_IRQ_POK_FALL, + AXP806_IRQ_POK_RISE, }; enum axp809_irqs { -- cgit v1.2.3 From a411e81e61df24023f40255145d8f023402002c9 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Tue, 10 Apr 2018 22:30:28 +0200 Subject: gpiolib: add hogs support for machine code Board files constitute a significant part of the users of the legacy GPIO framework. In many cases they only export a line and set its desired value. We could use GPIO hogs for that like we do for DT and ACPI but there's no support for that in machine code. This patch proposes to extend the machine.h API with support for registering hog tables in board files. Signed-off-by: Bartosz Golaszewski Signed-off-by: Linus Walleij --- include/linux/gpio/machine.h | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) (limited to 'include/linux') diff --git a/include/linux/gpio/machine.h b/include/linux/gpio/machine.h index b2f2dc638463..daa44eac9241 100644 --- a/include/linux/gpio/machine.h +++ b/include/linux/gpio/machine.h @@ -39,6 +39,23 @@ struct gpiod_lookup_table { struct gpiod_lookup table[]; }; +/** + * struct gpiod_hog - GPIO line hog table + * @chip_label: name of the chip the GPIO belongs to + * @chip_hwnum: hardware number (i.e. relative to the chip) of the GPIO + * @line_name: consumer name for the hogged line + * @lflags: mask of GPIO lookup flags + * @dflags: GPIO flags used to specify the direction and value + */ +struct gpiod_hog { + struct list_head list; + const char *chip_label; + u16 chip_hwnum; + const char *line_name; + enum gpio_lookup_flags lflags; + int dflags; +}; + /* * Simple definition of a single GPIO under a con_id */ @@ -59,10 +76,23 @@ struct gpiod_lookup_table { .flags = _flags, \ } +/* + * Simple definition of a single GPIO hog in an array. + */ +#define GPIO_HOG(_chip_label, _chip_hwnum, _line_name, _lflags, _dflags) \ +{ \ + .chip_label = _chip_label, \ + .chip_hwnum = _chip_hwnum, \ + .line_name = _line_name, \ + .lflags = _lflags, \ + .dflags = _dflags, \ +} + #ifdef CONFIG_GPIOLIB void gpiod_add_lookup_table(struct gpiod_lookup_table *table); void gpiod_add_lookup_tables(struct gpiod_lookup_table **tables, size_t n); void gpiod_remove_lookup_table(struct gpiod_lookup_table *table); +void gpiod_add_hogs(struct gpiod_hog *hogs); #else static inline void gpiod_add_lookup_table(struct gpiod_lookup_table *table) {} @@ -70,6 +100,7 @@ static inline void gpiod_add_lookup_tables(struct gpiod_lookup_table **tables, size_t n) {} static inline void gpiod_remove_lookup_table(struct gpiod_lookup_table *table) {} +static inline void gpiod_add_hogs(struct gpiod_hog *hogs) {} #endif #endif /* __LINUX_GPIO_MACHINE_H */ -- cgit v1.2.3 From e6ca26abd37606ba4864f20c85d3fe4a2173b93f Mon Sep 17 00:00:00 2001 From: Phil Edworthy Date: Thu, 26 Apr 2018 17:19:47 +0100 Subject: gpio: dwapb: Add support for 1 interrupt per port A GPIO The DesignWare GPIO IP can be configured for either 1 interrupt or 1 per GPIO in port A, but the driver currently only supports 1 interrupt. See the DesignWare DW_apb_gpio Databook description of the 'GPIO_INTR_IO' parameter. This change allows the driver to work with up to 32 interrupts, it will get as many interrupts as specified in the DT 'interrupts' property. It doesn't do anything clever with the different interrupts, it just calls the same handler used for single interrupt hardware. ACPI companion code provided by Hoan Tran . This was tested on X-Gene by Hoan. Signed-off-by: Phil Edworthy Reviewed-by: Rob Herring Acked-by: Lee Jones Acked-by: Hoan Tran Signed-off-by: Linus Walleij --- include/linux/platform_data/gpio-dwapb.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/platform_data/gpio-dwapb.h b/include/linux/platform_data/gpio-dwapb.h index 2dc7f4a8ab09..5a52d69c13f3 100644 --- a/include/linux/platform_data/gpio-dwapb.h +++ b/include/linux/platform_data/gpio-dwapb.h @@ -19,7 +19,8 @@ struct dwapb_port_property { unsigned int idx; unsigned int ngpio; unsigned int gpio_base; - unsigned int irq; + unsigned int irq[32]; + bool has_irq; bool irq_shared; }; -- cgit v1.2.3 From c59b3715ac16544f8f68ab7af03f108e339b36aa Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Wed, 16 May 2018 21:08:42 +0200 Subject: rtc: nvmem: don't return an error when not enabled Avoid reporting an error when RTC_NVMEM is not selected. Reported-by: kernel test robot Signed-off-by: Alexandre Belloni --- include/linux/rtc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/rtc.h b/include/linux/rtc.h index 4c007f69082f..6268208760e9 100644 --- a/include/linux/rtc.h +++ b/include/linux/rtc.h @@ -285,7 +285,7 @@ void rtc_nvmem_unregister(struct rtc_device *rtc); static inline int rtc_nvmem_register(struct rtc_device *rtc, struct nvmem_config *nvmem_config) { - return -ENODEV; + return 0; } static inline void rtc_nvmem_unregister(struct rtc_device *rtc) {} #endif -- cgit v1.2.3 From 84b3a7c9c6befe5ab4d49070fe7bcab2da22637e Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Tue, 15 May 2018 15:07:17 -0700 Subject: regulator: core: Allow for regulators that can't be read at bootup Regulators attached via RPMh on Qualcomm sdm845 apparently are write-only. Specifically you can send a request for a certain voltage but you can't read back to see what voltage you've requested. What this means is that at bootup we have absolutely no idea what voltage we could be at. As discussed in the patches to try to support the RPMh regulators [1], the fact that regulators are write-only means that its driver's get_voltage_sel() should return an error code if it's called before any calls to set_voltage_sel(). This causes problems in machine_constraints_voltage() when trying to apply the constraints. A proposed fix was to come up with an error code that could be returned by get_voltage_sel() which would cause the regulator framework to simply try setting the voltage with the current constraints. In this patch I propose the error code -ENOTRECOVERABLE. In errno.h this error is described as "State not recoverable". Though the error code was originally intended "for robust mutexes", the description of the error code seems to apply here because we can't read the state of the regulator. Also note that the only existing user of this error code in the regulator framework is tps65090-regulator.c which returns this error code from the enable() call (not get_voltage() or get_voltage_sel()), so there should be no existing regulators that might accidentally get the new behavior. (Side note is that tps65090 seems to interpret this error code to mean an error that you can't recover from rather than some data that can't be recovered). [1] https://patchwork.kernel.org/patch/10340897/ Signed-off-by: Douglas Anderson Signed-off-by: Mark Brown --- include/linux/regulator/driver.h | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 4fc96cb8e5d7..14e512ad6d4f 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -81,9 +81,12 @@ struct regulator_linear_range { * @set_voltage_sel: Set the voltage for the regulator using the specified * selector. * @map_voltage: Convert a voltage into a selector - * @get_voltage: Return the currently configured voltage for the regulator. + * @get_voltage: Return the currently configured voltage for the regulator; + * return -ENOTRECOVERABLE if regulator can't be read at + * bootup and hasn't been set yet. * @get_voltage_sel: Return the currently configured voltage selector for the - * regulator. + * regulator; return -ENOTRECOVERABLE if regulator can't + * be read at bootup and hasn't been set yet. * @list_voltage: Return one of the supported voltages, in microvolts; zero * if the selector indicates a voltage that is unusable on this system; * or negative errno. Selectors range from zero to one less than -- cgit v1.2.3 From e1739e86f0cb9c48e8745a610e6981a4e24cadad Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 14 May 2018 10:06:24 +0200 Subject: regulator: arizona-ldo1: Look up a descriptor and pass to the core Instead of passing a global GPIO number, pass a descriptor looked up with the standard devm_gpiod_get_optional() call. We have augmented the GPIO core to look up the regulator special GPIO "wlf,ldoena" in commit 6a537d48461d "gpio: of: Support regulator nonstandard GPIO properties". Signed-off-by: Linus Walleij Acked-by: Charles Keepax Signed-off-by: Mark Brown --- include/linux/regulator/arizona-ldo1.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/regulator/arizona-ldo1.h b/include/linux/regulator/arizona-ldo1.h index c685f1277c63..fe74ab9990e6 100644 --- a/include/linux/regulator/arizona-ldo1.h +++ b/include/linux/regulator/arizona-ldo1.h @@ -14,9 +14,6 @@ struct regulator_init_data; struct arizona_ldo1_pdata { - /** GPIO controlling LDOENA, if any */ - int ldoena; - /** Regulator configuration for LDO1 */ const struct regulator_init_data *init_data; }; -- cgit v1.2.3 From 66cf9a7e0192734c1c94751e628bd075be62cff4 Mon Sep 17 00:00:00 2001 From: Maciej Purski Date: Mon, 23 Apr 2018 16:33:37 +0200 Subject: regulator: core: Make locks re-entrant Setting voltage, enabling/disabling regulators requires operations on all regulators related with the regulator being changed. Therefore, all of them should be locked for the whole operation. With the current locking implementation, adding additional dependency (regulators coupling) causes deadlocks in some cases. Introduce a possibility to attempt to lock a mutex multiple times by the same task without waiting on a mutex. This should handle all reasonable coupling-supplying combinations, especially when two coupled regulators share common supplies. The only situation that should be forbidden is simultaneous coupling and supplying between a pair of regulators. The idea is based on clk core. Signed-off-by: Maciej Purski Signed-off-by: Mark Brown --- include/linux/regulator/driver.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 14e512ad6d4f..c2a181fa7287 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -434,6 +434,8 @@ struct regulator_dev { struct blocking_notifier_head notifier; struct mutex mutex; /* consumer lock */ + struct task_struct *mutex_owner; + int ref_cnt; struct module *owner; struct device dev; struct regulation_constraints *constraints; -- cgit v1.2.3 From a085a31af566254fb8f7721911c828c8fa797894 Mon Sep 17 00:00:00 2001 From: Maciej Purski Date: Mon, 23 Apr 2018 16:33:39 +0200 Subject: regulator: core: Parse coupled regulators properties On Odroid XU3/4 and other Exynos5422 based boards there is a case, that different devices on the board are supplied by different regulators with non-fixed voltages. If one of these devices temporarily requires higher voltage, there might occur a situation that the spread between devices' voltages is so high, that there is a risk of changing 'high' and 'low' states on the interconnection between devices powered by those regulators. Add new structure "coupling_desc" to regulator_dev, which contains pointers to all coupled regulators including the owner of the structure, number of coupled regulators and counter of currently resolved regulators. Add of_functions to parse all data needed in regulator coupling. Provide method to check DTS data consistency. Check if each coupled regulator's max_spread is equal and if their lists of regulators match. Signed-off-by: Maciej Purski Signed-off-by: Mark Brown --- include/linux/regulator/driver.h | 18 ++++++++++++++++++ include/linux/regulator/machine.h | 4 ++++ 2 files changed, 22 insertions(+) (limited to 'include/linux') diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index c2a181fa7287..fc2dc8df476f 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -15,6 +15,8 @@ #ifndef __LINUX_REGULATOR_DRIVER_H_ #define __LINUX_REGULATOR_DRIVER_H_ +#define MAX_COUPLED 4 + #include #include #include @@ -409,6 +411,20 @@ struct regulator_config { unsigned int ena_gpio_flags; }; +/* + * struct coupling_desc + * + * Describes coupling of regulators. Each regulator should have + * at least a pointer to itself in coupled_rdevs array. + * When a new coupled regulator is resolved, n_resolved is + * incremented. + */ +struct coupling_desc { + struct regulator_dev *coupled_rdevs[MAX_COUPLED]; + int n_resolved; + int n_coupled; +}; + /* * struct regulator_dev * @@ -432,6 +448,8 @@ struct regulator_dev { /* lists we own */ struct list_head consumer_list; /* consumers we supply */ + struct coupling_desc coupling_desc; + struct blocking_notifier_head notifier; struct mutex mutex; /* consumer lock */ struct task_struct *mutex_owner; diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index 93a04893c739..3468703d663a 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -103,6 +103,7 @@ struct regulator_state { * @ilim_uA: Maximum input current. * @system_load: Load that isn't captured by any consumer requests. * + * @max_spread: Max possible spread between coupled regulators * @valid_modes_mask: Mask of modes which may be configured by consumers. * @valid_ops_mask: Operations which may be performed by consumers. * @@ -154,6 +155,9 @@ struct regulation_constraints { int system_load; + /* used for coupled regulators */ + int max_spread; + /* valid regulator operating modes for this machine */ unsigned int valid_modes_mask; -- cgit v1.2.3 From 3c6b38d45fa51c7c51c5e2347fc1a6bef6a46525 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 14 May 2018 10:06:34 +0200 Subject: regulator: wm8994: Pass descriptor instead of GPIO number Instead of passing a global GPIO number for the enable GPIO, pass a descriptor looked up from the device tree node or the board file decriptor table for the regulator. There is a single board file passing the GPIOs for LDO1 and LDO2 through platform data, so augment this to pass descriptors associated with the i2c device as well. The special GPIO enable DT property for the enable GPIO is nonstandard but this was accomodated in commit 6a537d48461deacc57c07ed86d9915e5aa4b3539 "gpio: of: Support regulator nonstandard GPIO properties". Signed-off-by: Linus Walleij Acked-by: Charles Keepax Acked-by: Lee Jones Signed-off-by: Mark Brown --- include/linux/mfd/wm8994/pdata.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h index 90c60524a496..fca67bd194e2 100644 --- a/include/linux/mfd/wm8994/pdata.h +++ b/include/linux/mfd/wm8994/pdata.h @@ -20,9 +20,6 @@ #define WM8994_NUM_AIF 3 struct wm8994_ldo_pdata { - /** GPIOs to enable regulator, 0 or less if not available */ - int enable; - const struct regulator_init_data *init_data; }; -- cgit v1.2.3 From 1e9d42194e4c8f0ba3f9d4f72b5f54050ddf7a39 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 19 Apr 2018 22:00:07 +0200 Subject: i2c: gpio: move header to platform_data This header only contains platform_data. Move it to the proper directory. Signed-off-by: Wolfram Sang Acked-by: Tony Lindgren Acked-by: Lee Jones Acked-by: Robert Jarzmik Acked-by: Mauro Carvalho Chehab Acked-by: James Hogan Acked-by: Greg Ungerer --- include/linux/i2c-gpio.h | 34 ---------------------------------- include/linux/platform_data/i2c-gpio.h | 34 ++++++++++++++++++++++++++++++++++ 2 files changed, 34 insertions(+), 34 deletions(-) delete mode 100644 include/linux/i2c-gpio.h create mode 100644 include/linux/platform_data/i2c-gpio.h (limited to 'include/linux') diff --git a/include/linux/i2c-gpio.h b/include/linux/i2c-gpio.h deleted file mode 100644 index 352c1426fd4d..000000000000 --- a/include/linux/i2c-gpio.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * i2c-gpio interface to platform code - * - * Copyright (C) 2007 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef _LINUX_I2C_GPIO_H -#define _LINUX_I2C_GPIO_H - -/** - * struct i2c_gpio_platform_data - Platform-dependent data for i2c-gpio - * @udelay: signal toggle delay. SCL frequency is (500 / udelay) kHz - * @timeout: clock stretching timeout in jiffies. If the slave keeps - * SCL low for longer than this, the transfer will time out. - * @sda_is_open_drain: SDA is configured as open drain, i.e. the pin - * isn't actively driven high when setting the output value high. - * gpio_get_value() must return the actual pin state even if the - * pin is configured as an output. - * @scl_is_open_drain: SCL is set up as open drain. Same requirements - * as for sda_is_open_drain apply. - * @scl_is_output_only: SCL output drivers cannot be turned off. - */ -struct i2c_gpio_platform_data { - int udelay; - int timeout; - unsigned int sda_is_open_drain:1; - unsigned int scl_is_open_drain:1; - unsigned int scl_is_output_only:1; -}; - -#endif /* _LINUX_I2C_GPIO_H */ diff --git a/include/linux/platform_data/i2c-gpio.h b/include/linux/platform_data/i2c-gpio.h new file mode 100644 index 000000000000..352c1426fd4d --- /dev/null +++ b/include/linux/platform_data/i2c-gpio.h @@ -0,0 +1,34 @@ +/* + * i2c-gpio interface to platform code + * + * Copyright (C) 2007 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _LINUX_I2C_GPIO_H +#define _LINUX_I2C_GPIO_H + +/** + * struct i2c_gpio_platform_data - Platform-dependent data for i2c-gpio + * @udelay: signal toggle delay. SCL frequency is (500 / udelay) kHz + * @timeout: clock stretching timeout in jiffies. If the slave keeps + * SCL low for longer than this, the transfer will time out. + * @sda_is_open_drain: SDA is configured as open drain, i.e. the pin + * isn't actively driven high when setting the output value high. + * gpio_get_value() must return the actual pin state even if the + * pin is configured as an output. + * @scl_is_open_drain: SCL is set up as open drain. Same requirements + * as for sda_is_open_drain apply. + * @scl_is_output_only: SCL output drivers cannot be turned off. + */ +struct i2c_gpio_platform_data { + int udelay; + int timeout; + unsigned int sda_is_open_drain:1; + unsigned int scl_is_open_drain:1; + unsigned int scl_is_output_only:1; +}; + +#endif /* _LINUX_I2C_GPIO_H */ -- cgit v1.2.3 From 62ea22c4954f5b147488eefa644d668e843be6f7 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 19 Apr 2018 22:00:08 +0200 Subject: i2c: mux: gpio: move header to platform_data This header only contains platform_data. Move it to the proper directory. Signed-off-by: Wolfram Sang Acked-by: Peter Korsgaard --- include/linux/i2c-mux-gpio.h | 43 ------------------------------ include/linux/platform_data/i2c-mux-gpio.h | 43 ++++++++++++++++++++++++++++++ 2 files changed, 43 insertions(+), 43 deletions(-) delete mode 100644 include/linux/i2c-mux-gpio.h create mode 100644 include/linux/platform_data/i2c-mux-gpio.h (limited to 'include/linux') diff --git a/include/linux/i2c-mux-gpio.h b/include/linux/i2c-mux-gpio.h deleted file mode 100644 index 4406108201fe..000000000000 --- a/include/linux/i2c-mux-gpio.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * i2c-mux-gpio interface to platform code - * - * Peter Korsgaard - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef _LINUX_I2C_MUX_GPIO_H -#define _LINUX_I2C_MUX_GPIO_H - -/* MUX has no specific idle mode */ -#define I2C_MUX_GPIO_NO_IDLE ((unsigned)-1) - -/** - * struct i2c_mux_gpio_platform_data - Platform-dependent data for i2c-mux-gpio - * @parent: Parent I2C bus adapter number - * @base_nr: Base I2C bus number to number adapters from or zero for dynamic - * @values: Array of bitmasks of GPIO settings (low/high) for each - * position - * @n_values: Number of multiplexer positions (busses to instantiate) - * @classes: Optional I2C auto-detection classes - * @gpio_chip: Optional GPIO chip name; if set, GPIO pin numbers are given - * relative to the base GPIO number of that chip - * @gpios: Array of GPIO numbers used to control MUX - * @n_gpios: Number of GPIOs used to control MUX - * @idle: Bitmask to write to MUX when idle or GPIO_I2CMUX_NO_IDLE if not used - */ -struct i2c_mux_gpio_platform_data { - int parent; - int base_nr; - const unsigned *values; - int n_values; - const unsigned *classes; - char *gpio_chip; - const unsigned *gpios; - int n_gpios; - unsigned idle; -}; - -#endif /* _LINUX_I2C_MUX_GPIO_H */ diff --git a/include/linux/platform_data/i2c-mux-gpio.h b/include/linux/platform_data/i2c-mux-gpio.h new file mode 100644 index 000000000000..4406108201fe --- /dev/null +++ b/include/linux/platform_data/i2c-mux-gpio.h @@ -0,0 +1,43 @@ +/* + * i2c-mux-gpio interface to platform code + * + * Peter Korsgaard + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _LINUX_I2C_MUX_GPIO_H +#define _LINUX_I2C_MUX_GPIO_H + +/* MUX has no specific idle mode */ +#define I2C_MUX_GPIO_NO_IDLE ((unsigned)-1) + +/** + * struct i2c_mux_gpio_platform_data - Platform-dependent data for i2c-mux-gpio + * @parent: Parent I2C bus adapter number + * @base_nr: Base I2C bus number to number adapters from or zero for dynamic + * @values: Array of bitmasks of GPIO settings (low/high) for each + * position + * @n_values: Number of multiplexer positions (busses to instantiate) + * @classes: Optional I2C auto-detection classes + * @gpio_chip: Optional GPIO chip name; if set, GPIO pin numbers are given + * relative to the base GPIO number of that chip + * @gpios: Array of GPIO numbers used to control MUX + * @n_gpios: Number of GPIOs used to control MUX + * @idle: Bitmask to write to MUX when idle or GPIO_I2CMUX_NO_IDLE if not used + */ +struct i2c_mux_gpio_platform_data { + int parent; + int base_nr; + const unsigned *values; + int n_values; + const unsigned *classes; + char *gpio_chip; + const unsigned *gpios; + int n_gpios; + unsigned idle; +}; + +#endif /* _LINUX_I2C_MUX_GPIO_H */ -- cgit v1.2.3 From 985ecf00375bde7d80be03a749f5b94d5ba77ac8 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 19 Apr 2018 22:00:09 +0200 Subject: i2c: ocores: move header to platform_data This header only contains platform_data. Move it to the proper directory. Signed-off-by: Wolfram Sang Acked-by: Lee Jones --- include/linux/i2c-ocores.h | 23 ----------------------- include/linux/platform_data/i2c-ocores.h | 23 +++++++++++++++++++++++ 2 files changed, 23 insertions(+), 23 deletions(-) delete mode 100644 include/linux/i2c-ocores.h create mode 100644 include/linux/platform_data/i2c-ocores.h (limited to 'include/linux') diff --git a/include/linux/i2c-ocores.h b/include/linux/i2c-ocores.h deleted file mode 100644 index 01edd96fe1f7..000000000000 --- a/include/linux/i2c-ocores.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * i2c-ocores.h - definitions for the i2c-ocores interface - * - * Peter Korsgaard - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#ifndef _LINUX_I2C_OCORES_H -#define _LINUX_I2C_OCORES_H - -struct ocores_i2c_platform_data { - u32 reg_shift; /* register offset shift value */ - u32 reg_io_width; /* register io read/write width */ - u32 clock_khz; /* input clock in kHz */ - bool big_endian; /* registers are big endian */ - u8 num_devices; /* number of devices in the devices list */ - struct i2c_board_info const *devices; /* devices connected to the bus */ -}; - -#endif /* _LINUX_I2C_OCORES_H */ diff --git a/include/linux/platform_data/i2c-ocores.h b/include/linux/platform_data/i2c-ocores.h new file mode 100644 index 000000000000..01edd96fe1f7 --- /dev/null +++ b/include/linux/platform_data/i2c-ocores.h @@ -0,0 +1,23 @@ +/* + * i2c-ocores.h - definitions for the i2c-ocores interface + * + * Peter Korsgaard + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef _LINUX_I2C_OCORES_H +#define _LINUX_I2C_OCORES_H + +struct ocores_i2c_platform_data { + u32 reg_shift; /* register offset shift value */ + u32 reg_io_width; /* register io read/write width */ + u32 clock_khz; /* input clock in kHz */ + bool big_endian; /* registers are big endian */ + u8 num_devices; /* number of devices in the devices list */ + struct i2c_board_info const *devices; /* devices connected to the bus */ +}; + +#endif /* _LINUX_I2C_OCORES_H */ -- cgit v1.2.3 From 79fc540fd543f47e77e1c7d407f2c082872a4625 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 19 Apr 2018 22:00:10 +0200 Subject: i2c: omap: move header to platform_data This header only contains platform_data. Move it to the proper directory. Signed-off-by: Wolfram Sang Acked-by: Tony Lindgren --- include/linux/i2c-omap.h | 39 ---------------------------------- include/linux/platform_data/i2c-omap.h | 39 ++++++++++++++++++++++++++++++++++ 2 files changed, 39 insertions(+), 39 deletions(-) delete mode 100644 include/linux/i2c-omap.h create mode 100644 include/linux/platform_data/i2c-omap.h (limited to 'include/linux') diff --git a/include/linux/i2c-omap.h b/include/linux/i2c-omap.h deleted file mode 100644 index 3444265ee8ee..000000000000 --- a/include/linux/i2c-omap.h +++ /dev/null @@ -1,39 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __I2C_OMAP_H__ -#define __I2C_OMAP_H__ - -#include - -/* - * Version 2 of the I2C peripheral unit has a different register - * layout and extra registers. The ID register in the V2 peripheral - * unit on the OMAP4430 reports the same ID as the V1 peripheral - * unit on the OMAP3530, so we must inform the driver which IP - * version we know it is running on from platform / cpu-specific - * code using these constants in the hwmod class definition. - */ - -#define OMAP_I2C_IP_VERSION_1 1 -#define OMAP_I2C_IP_VERSION_2 2 - -/* struct omap_i2c_bus_platform_data .flags meanings */ - -#define OMAP_I2C_FLAG_NO_FIFO BIT(0) -#define OMAP_I2C_FLAG_SIMPLE_CLOCK BIT(1) -#define OMAP_I2C_FLAG_16BIT_DATA_REG BIT(2) -#define OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK BIT(5) -#define OMAP_I2C_FLAG_FORCE_19200_INT_CLK BIT(6) -/* how the CPU address bus must be translated for I2C unit access */ -#define OMAP_I2C_FLAG_BUS_SHIFT_NONE 0 -#define OMAP_I2C_FLAG_BUS_SHIFT_1 BIT(7) -#define OMAP_I2C_FLAG_BUS_SHIFT_2 BIT(8) -#define OMAP_I2C_FLAG_BUS_SHIFT__SHIFT 7 - -struct omap_i2c_bus_platform_data { - u32 clkrate; - u32 rev; - u32 flags; - void (*set_mpu_wkup_lat)(struct device *dev, long set); -}; - -#endif diff --git a/include/linux/platform_data/i2c-omap.h b/include/linux/platform_data/i2c-omap.h new file mode 100644 index 000000000000..3444265ee8ee --- /dev/null +++ b/include/linux/platform_data/i2c-omap.h @@ -0,0 +1,39 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __I2C_OMAP_H__ +#define __I2C_OMAP_H__ + +#include + +/* + * Version 2 of the I2C peripheral unit has a different register + * layout and extra registers. The ID register in the V2 peripheral + * unit on the OMAP4430 reports the same ID as the V1 peripheral + * unit on the OMAP3530, so we must inform the driver which IP + * version we know it is running on from platform / cpu-specific + * code using these constants in the hwmod class definition. + */ + +#define OMAP_I2C_IP_VERSION_1 1 +#define OMAP_I2C_IP_VERSION_2 2 + +/* struct omap_i2c_bus_platform_data .flags meanings */ + +#define OMAP_I2C_FLAG_NO_FIFO BIT(0) +#define OMAP_I2C_FLAG_SIMPLE_CLOCK BIT(1) +#define OMAP_I2C_FLAG_16BIT_DATA_REG BIT(2) +#define OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK BIT(5) +#define OMAP_I2C_FLAG_FORCE_19200_INT_CLK BIT(6) +/* how the CPU address bus must be translated for I2C unit access */ +#define OMAP_I2C_FLAG_BUS_SHIFT_NONE 0 +#define OMAP_I2C_FLAG_BUS_SHIFT_1 BIT(7) +#define OMAP_I2C_FLAG_BUS_SHIFT_2 BIT(8) +#define OMAP_I2C_FLAG_BUS_SHIFT__SHIFT 7 + +struct omap_i2c_bus_platform_data { + u32 clkrate; + u32 rev; + u32 flags; + void (*set_mpu_wkup_lat)(struct device *dev, long set); +}; + +#endif -- cgit v1.2.3 From e5c7137793a754500e65ffd7477e88ff7a06ac53 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 19 Apr 2018 22:00:11 +0200 Subject: i2c: pca-platform: move header to platform_data This header only contains platform_data. Move it to the proper directory. Signed-off-by: Wolfram Sang --- include/linux/i2c-pca-platform.h | 10 ---------- include/linux/platform_data/i2c-pca-platform.h | 10 ++++++++++ 2 files changed, 10 insertions(+), 10 deletions(-) delete mode 100644 include/linux/i2c-pca-platform.h create mode 100644 include/linux/platform_data/i2c-pca-platform.h (limited to 'include/linux') diff --git a/include/linux/i2c-pca-platform.h b/include/linux/i2c-pca-platform.h deleted file mode 100644 index c37329432a8e..000000000000 --- a/include/linux/i2c-pca-platform.h +++ /dev/null @@ -1,10 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef I2C_PCA9564_PLATFORM_H -#define I2C_PCA9564_PLATFORM_H - -struct i2c_pca9564_pf_platform_data { - int i2c_clock_speed; /* values are defined in linux/i2c-algo-pca.h */ - int timeout; /* timeout in jiffies */ -}; - -#endif /* I2C_PCA9564_PLATFORM_H */ diff --git a/include/linux/platform_data/i2c-pca-platform.h b/include/linux/platform_data/i2c-pca-platform.h new file mode 100644 index 000000000000..c37329432a8e --- /dev/null +++ b/include/linux/platform_data/i2c-pca-platform.h @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef I2C_PCA9564_PLATFORM_H +#define I2C_PCA9564_PLATFORM_H + +struct i2c_pca9564_pf_platform_data { + int i2c_clock_speed; /* values are defined in linux/i2c-algo-pca.h */ + int timeout; /* timeout in jiffies */ +}; + +#endif /* I2C_PCA9564_PLATFORM_H */ -- cgit v1.2.3 From 7072b75c15271cef07792f659eaf0cc7160f6442 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 19 Apr 2018 22:00:12 +0200 Subject: i2c: xiic: move header to platform_data This header only contains platform_data. Move it to the proper directory. Signed-off-by: Wolfram Sang Acked-by: Lee Jones --- include/linux/i2c-xiic.h | 43 ---------------------------------- include/linux/platform_data/i2c-xiic.h | 43 ++++++++++++++++++++++++++++++++++ 2 files changed, 43 insertions(+), 43 deletions(-) delete mode 100644 include/linux/i2c-xiic.h create mode 100644 include/linux/platform_data/i2c-xiic.h (limited to 'include/linux') diff --git a/include/linux/i2c-xiic.h b/include/linux/i2c-xiic.h deleted file mode 100644 index 4f9f2256a97e..000000000000 --- a/include/linux/i2c-xiic.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * i2c-xiic.h - * Copyright (c) 2009 Intel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -/* Supports: - * Xilinx IIC - */ - -#ifndef _LINUX_I2C_XIIC_H -#define _LINUX_I2C_XIIC_H - -/** - * struct xiic_i2c_platform_data - Platform data of the Xilinx I2C driver - * @num_devices: Number of devices that shall be added when the driver - * is probed. - * @devices: The actuall devices to add. - * - * This purpose of this platform data struct is to be able to provide a number - * of devices that should be added to the I2C bus. The reason is that sometimes - * the I2C board info is not enough, a new PCI board can for instance be - * plugged into a standard PC, and the bus number might be unknown at - * early init time. - */ -struct xiic_i2c_platform_data { - u8 num_devices; - struct i2c_board_info const *devices; -}; - -#endif /* _LINUX_I2C_XIIC_H */ diff --git a/include/linux/platform_data/i2c-xiic.h b/include/linux/platform_data/i2c-xiic.h new file mode 100644 index 000000000000..4f9f2256a97e --- /dev/null +++ b/include/linux/platform_data/i2c-xiic.h @@ -0,0 +1,43 @@ +/* + * i2c-xiic.h + * Copyright (c) 2009 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* Supports: + * Xilinx IIC + */ + +#ifndef _LINUX_I2C_XIIC_H +#define _LINUX_I2C_XIIC_H + +/** + * struct xiic_i2c_platform_data - Platform data of the Xilinx I2C driver + * @num_devices: Number of devices that shall be added when the driver + * is probed. + * @devices: The actuall devices to add. + * + * This purpose of this platform data struct is to be able to provide a number + * of devices that should be added to the I2C bus. The reason is that sometimes + * the I2C board info is not enough, a new PCI board can for instance be + * plugged into a standard PC, and the bus number might be unknown at + * early init time. + */ +struct xiic_i2c_platform_data { + u8 num_devices; + struct i2c_board_info const *devices; +}; + +#endif /* _LINUX_I2C_XIIC_H */ -- cgit v1.2.3 From caaccda136ae3fa1c5f6563aae22ca3c199f563a Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 19 Apr 2018 22:00:13 +0200 Subject: i2c: pnx: move header into the driver There are no platform_data users anymore. Move the structs into the driver. Signed-off-by: Wolfram Sang Acked-by: Vladimir Zapolskiy --- include/linux/i2c-pnx.h | 38 -------------------------------------- 1 file changed, 38 deletions(-) delete mode 100644 include/linux/i2c-pnx.h (limited to 'include/linux') diff --git a/include/linux/i2c-pnx.h b/include/linux/i2c-pnx.h deleted file mode 100644 index 5388326fbbff..000000000000 --- a/include/linux/i2c-pnx.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * Header file for I2C support on PNX010x/4008. - * - * Author: Dennis Kovalev - * - * 2004-2006 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef __I2C_PNX_H__ -#define __I2C_PNX_H__ - -struct platform_device; -struct clk; - -struct i2c_pnx_mif { - int ret; /* Return value */ - int mode; /* Interface mode */ - struct completion complete; /* I/O completion */ - struct timer_list timer; /* Timeout */ - u8 * buf; /* Data buffer */ - int len; /* Length of data buffer */ - int order; /* RX Bytes to order via TX */ -}; - -struct i2c_pnx_algo_data { - void __iomem *ioaddr; - struct i2c_pnx_mif mif; - int last; - struct clk *clk; - struct i2c_adapter adapter; - int irq; - u32 timeout; -}; - -#endif /* __I2C_PNX_H__ */ -- cgit v1.2.3 From 9b97387c5c4260ffcdf3b913bdef0d98cb2d4a74 Mon Sep 17 00:00:00 2001 From: Jeremy Linton Date: Fri, 11 May 2018 18:57:58 -0500 Subject: cacheinfo: rename of_node to fw_token Rename and change the type of of_node to indicate it is a generic pointer which is generally only used for comparison purposes. In a later patch we will put an ACPI/PPTT token pointer in fw_token so that the code which builds the shared cpu masks can be reused. Tested-by: Ard Biesheuvel Tested-by: Vijaya Kumar K Tested-by: Xiongfeng Wang Tested-by: Tomasz Nowicki Acked-by: Sudeep Holla Acked-by: Ard Biesheuvel Acked-by: Greg Kroah-Hartman Signed-off-by: Jeremy Linton Signed-off-by: Catalin Marinas --- include/linux/cacheinfo.h | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/cacheinfo.h b/include/linux/cacheinfo.h index 3d9805297cda..0c6f658054d2 100644 --- a/include/linux/cacheinfo.h +++ b/include/linux/cacheinfo.h @@ -34,9 +34,8 @@ enum cache_type { * @shared_cpu_map: logical cpumask representing all the cpus sharing * this cache node * @attributes: bitfield representing various cache attributes - * @of_node: if devicetree is used, this represents either the cpu node in - * case there's no explicit cache node or the cache node itself in the - * device tree + * @fw_token: Unique value used to determine if different cacheinfo + * structures represent a single hardware cache instance. * @disable_sysfs: indicates whether this node is visible to the user via * sysfs or not * @priv: pointer to any private data structure specific to particular @@ -65,8 +64,7 @@ struct cacheinfo { #define CACHE_ALLOCATE_POLICY_MASK \ (CACHE_READ_ALLOCATE | CACHE_WRITE_ALLOCATE) #define CACHE_ID BIT(4) - - struct device_node *of_node; + void *fw_token; bool disable_sysfs; void *priv; }; -- cgit v1.2.3 From 2bd00bcd73e5edd5769e2a5f24c59a517582d862 Mon Sep 17 00:00:00 2001 From: Jeremy Linton Date: Fri, 11 May 2018 18:58:00 -0500 Subject: ACPI/PPTT: Add Processor Properties Topology Table parsing ACPI 6.2 adds a new table, which describes how processing units are related to each other in tree like fashion. Caches are also sprinkled throughout the tree and describe the properties of the caches in relation to other caches and processing units. Add the code to parse the cache hierarchy and report the total number of levels of cache for a given core using acpi_find_last_cache_level() as well as fill out the individual cores cache information with cache_setup_acpi() once the cpu_cacheinfo structure has been populated by the arch specific code. An additional patch later in the set adds the ability to report peers in the topology using find_acpi_cpu_topology() to report a unique ID for each processing unit at a given level in the tree. These unique id's can then be used to match related processing units which exist as threads, within a given package, etc. Tested-by: Ard Biesheuvel Tested-by: Vijaya Kumar K Tested-by: Xiongfeng Wang Tested-by: Tomasz Nowicki Acked-by: Sudeep Holla Acked-by: Ard Biesheuvel Acked-by: Rafael J. Wysocki Signed-off-by: Jeremy Linton Signed-off-by: Catalin Marinas --- include/linux/acpi.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 15bfb15c2fa5..032e12a2fdc2 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -1297,4 +1297,8 @@ static inline int lpit_read_residency_count_address(u64 *address) } #endif +int find_acpi_cpu_topology(unsigned int cpu, int level); +int find_acpi_cpu_topology_package(unsigned int cpu); +int find_acpi_cpu_cache_topology(unsigned int cpu, int level); + #endif /*_LINUX_ACPI_H*/ -- cgit v1.2.3 From 582b468bdc6d9c287a432a63225cf7922e985e15 Mon Sep 17 00:00:00 2001 From: Jeremy Linton Date: Fri, 11 May 2018 18:58:02 -0500 Subject: drivers: base cacheinfo: Add support for ACPI based firmware tables Call ACPI cache parsing routines from base cacheinfo code if ACPI is enabled. Also stub out cache_setup_acpi and acpi_find_last_cache_level so that individual architectures can enable ACPI topology parsing. Tested-by: Ard Biesheuvel Tested-by: Vijaya Kumar K Tested-by: Xiongfeng Wang Tested-by: Tomasz Nowicki Acked-by: Sudeep Holla Acked-by: Ard Biesheuvel Acked-by: Greg Kroah-Hartman Signed-off-by: Jeremy Linton Signed-off-by: Catalin Marinas --- include/linux/cacheinfo.h | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'include/linux') diff --git a/include/linux/cacheinfo.h b/include/linux/cacheinfo.h index 0c6f658054d2..89397e30e269 100644 --- a/include/linux/cacheinfo.h +++ b/include/linux/cacheinfo.h @@ -97,6 +97,23 @@ int func(unsigned int cpu) \ struct cpu_cacheinfo *get_cpu_cacheinfo(unsigned int cpu); int init_cache_level(unsigned int cpu); int populate_cache_leaves(unsigned int cpu); +int cache_setup_acpi(unsigned int cpu); +#ifndef CONFIG_ACPI +/* + * acpi_find_last_cache_level is only called on ACPI enabled + * platforms using the PPTT for topology. This means that if + * the platform supports other firmware configuration methods + * we need to stub out the call when ACPI is disabled. + * ACPI enabled platforms not using PPTT won't be making calls + * to this function so we need not worry about them. + */ +static inline int acpi_find_last_cache_level(unsigned int cpu) +{ + return 0; +} +#else +int acpi_find_last_cache_level(unsigned int cpu); +#endif const struct attribute_group *cache_get_priv_group(struct cacheinfo *this_leaf); -- cgit v1.2.3 From 564def71765caf65040f926c0783b9c27cc6c087 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 18 May 2018 11:46:15 +0100 Subject: proc: Add a way to make network proc files writable Provide two extra functions, proc_create_net_data_write() and proc_create_net_single_write() that act like their non-write versions but also set a write method in the proc_dir_entry struct. An internal simple write function is provided that will copy its buffer and hand it to the pde->write() method if available (or give an error if not). The buffer may be modified by the write method. Signed-off-by: David Howells --- include/linux/proc_fs.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include/linux') diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h index e518352137e7..626fc65c4336 100644 --- a/include/linux/proc_fs.h +++ b/include/linux/proc_fs.h @@ -14,6 +14,8 @@ struct seq_operations; #ifdef CONFIG_PROC_FS +typedef int (*proc_write_t)(struct file *, char *, size_t); + extern void proc_root_init(void); extern void proc_flush_task(struct task_struct *); @@ -61,6 +63,16 @@ struct proc_dir_entry *proc_create_net_data(const char *name, umode_t mode, struct proc_dir_entry *proc_create_net_single(const char *name, umode_t mode, struct proc_dir_entry *parent, int (*show)(struct seq_file *, void *), void *data); +struct proc_dir_entry *proc_create_net_data_write(const char *name, umode_t mode, + struct proc_dir_entry *parent, + const struct seq_operations *ops, + proc_write_t write, + unsigned int state_size, void *data); +struct proc_dir_entry *proc_create_net_single_write(const char *name, umode_t mode, + struct proc_dir_entry *parent, + int (*show)(struct seq_file *, void *), + proc_write_t write, + void *data); #else /* CONFIG_PROC_FS */ -- cgit v1.2.3 From d6f7b98bc8147abd290ead82922f8d83c525fb42 Mon Sep 17 00:00:00 2001 From: Amir Goldstein Date: Fri, 20 Apr 2018 16:10:49 -0700 Subject: fsnotify: use type id to identify connector object type An fsnotify_mark_connector is referencing a single type of object (either inode or vfsmount). Instead of storing a type mask in connector->flags, store a single type id in connector->type to identify the type of object. When a connector object is detached from the object, its type is set to FSNOTIFY_OBJ_TYPE_DETACHED and this object is not going to be reused. The function fsnotify_clear_marks_by_group() is the only place where type mask was used, so use type flags instead of type id to this function. This change is going to be more convenient when adding a new object type (super block). Signed-off-by: Amir Goldstein Signed-off-by: Jan Kara --- include/linux/fsnotify_backend.h | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h index e64c0294f50b..435c94a31c8c 100644 --- a/include/linux/fsnotify_backend.h +++ b/include/linux/fsnotify_backend.h @@ -201,6 +201,17 @@ struct fsnotify_group { #define FSNOTIFY_EVENT_PATH 1 #define FSNOTIFY_EVENT_INODE 2 +enum fsnotify_obj_type { + FSNOTIFY_OBJ_TYPE_INODE, + FSNOTIFY_OBJ_TYPE_VFSMOUNT, + FSNOTIFY_OBJ_TYPE_COUNT, + FSNOTIFY_OBJ_TYPE_DETACHED = FSNOTIFY_OBJ_TYPE_COUNT +}; + +#define FSNOTIFY_OBJ_TYPE_INODE_FL (1U << FSNOTIFY_OBJ_TYPE_INODE) +#define FSNOTIFY_OBJ_TYPE_VFSMOUNT_FL (1U << FSNOTIFY_OBJ_TYPE_VFSMOUNT) +#define FSNOTIFY_OBJ_ALL_TYPES_MASK ((1U << FSNOTIFY_OBJ_TYPE_COUNT) - 1) + /* * Inode / vfsmount point to this structure which tracks all marks attached to * the inode / vfsmount. The reference to inode / vfsmount is held by this @@ -209,11 +220,7 @@ struct fsnotify_group { */ struct fsnotify_mark_connector { spinlock_t lock; -#define FSNOTIFY_OBJ_TYPE_INODE 0x01 -#define FSNOTIFY_OBJ_TYPE_VFSMOUNT 0x02 -#define FSNOTIFY_OBJ_ALL_TYPES (FSNOTIFY_OBJ_TYPE_INODE | \ - FSNOTIFY_OBJ_TYPE_VFSMOUNT) - unsigned int flags; /* Type of object [lock] */ + unsigned int type; /* Type of object [lock] */ union { /* Object pointer [lock] */ struct inode *inode; struct vfsmount *mnt; @@ -369,12 +376,12 @@ extern void fsnotify_clear_marks_by_group(struct fsnotify_group *group, unsigned /* run all the marks in a group, and clear all of the vfsmount marks */ static inline void fsnotify_clear_vfsmount_marks_by_group(struct fsnotify_group *group) { - fsnotify_clear_marks_by_group(group, FSNOTIFY_OBJ_TYPE_VFSMOUNT); + fsnotify_clear_marks_by_group(group, FSNOTIFY_OBJ_TYPE_VFSMOUNT_FL); } /* run all the marks in a group, and clear all of the inode marks */ static inline void fsnotify_clear_inode_marks_by_group(struct fsnotify_group *group) { - fsnotify_clear_marks_by_group(group, FSNOTIFY_OBJ_TYPE_INODE); + fsnotify_clear_marks_by_group(group, FSNOTIFY_OBJ_TYPE_INODE_FL); } extern void fsnotify_get_mark(struct fsnotify_mark *mark); extern void fsnotify_put_mark(struct fsnotify_mark *mark); -- cgit v1.2.3 From 5b0457ad021f3f7e3d9f4b84e7c3080748f383f8 Mon Sep 17 00:00:00 2001 From: Amir Goldstein Date: Fri, 20 Apr 2018 16:10:50 -0700 Subject: fsnotify: remove redundant arguments to handle_event() inode_mark and vfsmount_mark arguments are passed to handle_event() operation as function arguments as well as on iter_info struct. The difference is that iter_info struct may contain marks that should not be handled and are represented as NULL arguments to inode_mark or vfsmount_mark. Instead of passing the inode_mark and vfsmount_mark arguments, add a report_mask member to iter_info struct to indicate which marks should be handled, versus marks that should only be kept alive during user wait. This change is going to be used for passing more mark types with handle_event() (i.e. super block marks). Signed-off-by: Amir Goldstein Signed-off-by: Jan Kara --- include/linux/fsnotify_backend.h | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h index 435c94a31c8c..9da5edf4ac0f 100644 --- a/include/linux/fsnotify_backend.h +++ b/include/linux/fsnotify_backend.h @@ -98,8 +98,6 @@ struct fsnotify_iter_info; struct fsnotify_ops { int (*handle_event)(struct fsnotify_group *group, struct inode *inode, - struct fsnotify_mark *inode_mark, - struct fsnotify_mark *vfsmount_mark, u32 mask, const void *data, int data_type, const unsigned char *file_name, u32 cookie, struct fsnotify_iter_info *iter_info); @@ -212,6 +210,24 @@ enum fsnotify_obj_type { #define FSNOTIFY_OBJ_TYPE_VFSMOUNT_FL (1U << FSNOTIFY_OBJ_TYPE_VFSMOUNT) #define FSNOTIFY_OBJ_ALL_TYPES_MASK ((1U << FSNOTIFY_OBJ_TYPE_COUNT) - 1) +struct fsnotify_iter_info { + struct fsnotify_mark *inode_mark; + struct fsnotify_mark *vfsmount_mark; + unsigned int report_mask; + int srcu_idx; +}; + +#define FSNOTIFY_ITER_FUNCS(name, NAME) \ +static inline struct fsnotify_mark *fsnotify_iter_##name##_mark( \ + struct fsnotify_iter_info *iter_info) \ +{ \ + return (iter_info->report_mask & FSNOTIFY_OBJ_TYPE_##NAME##_FL) ? \ + iter_info->name##_mark : NULL; \ +} + +FSNOTIFY_ITER_FUNCS(inode, INODE) +FSNOTIFY_ITER_FUNCS(vfsmount, VFSMOUNT) + /* * Inode / vfsmount point to this structure which tracks all marks attached to * the inode / vfsmount. The reference to inode / vfsmount is held by this -- cgit v1.2.3 From 47d9c7cc457adc5d6d8ca966482a51459f81e852 Mon Sep 17 00:00:00 2001 From: Amir Goldstein Date: Fri, 20 Apr 2018 16:10:52 -0700 Subject: fsnotify: generalize iteration of marks by object type Make some code that handles marks of object types inode and vfsmount generic, so it can handle other object types. Introduce fsnotify_foreach_obj_type macro to iterate marks by object type and fsnotify_iter_{should|set}_report_type macros to set/test report_mask. This is going to be used for adding mark of another object type (super block mark). Signed-off-by: Amir Goldstein Signed-off-by: Jan Kara --- include/linux/fsnotify_backend.h | 28 +++++++++++++++++++++++++--- 1 file changed, 25 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h index 9da5edf4ac0f..763423bfa3d6 100644 --- a/include/linux/fsnotify_backend.h +++ b/include/linux/fsnotify_backend.h @@ -211,23 +211,45 @@ enum fsnotify_obj_type { #define FSNOTIFY_OBJ_ALL_TYPES_MASK ((1U << FSNOTIFY_OBJ_TYPE_COUNT) - 1) struct fsnotify_iter_info { - struct fsnotify_mark *inode_mark; - struct fsnotify_mark *vfsmount_mark; + struct fsnotify_mark *marks[FSNOTIFY_OBJ_TYPE_COUNT]; unsigned int report_mask; int srcu_idx; }; +static inline bool fsnotify_iter_should_report_type( + struct fsnotify_iter_info *iter_info, int type) +{ + return (iter_info->report_mask & (1U << type)); +} + +static inline void fsnotify_iter_set_report_type( + struct fsnotify_iter_info *iter_info, int type) +{ + iter_info->report_mask |= (1U << type); +} + +static inline void fsnotify_iter_set_report_type_mark( + struct fsnotify_iter_info *iter_info, int type, + struct fsnotify_mark *mark) +{ + iter_info->marks[type] = mark; + iter_info->report_mask |= (1U << type); +} + #define FSNOTIFY_ITER_FUNCS(name, NAME) \ static inline struct fsnotify_mark *fsnotify_iter_##name##_mark( \ struct fsnotify_iter_info *iter_info) \ { \ return (iter_info->report_mask & FSNOTIFY_OBJ_TYPE_##NAME##_FL) ? \ - iter_info->name##_mark : NULL; \ + iter_info->marks[FSNOTIFY_OBJ_TYPE_##NAME] : NULL; \ } FSNOTIFY_ITER_FUNCS(inode, INODE) FSNOTIFY_ITER_FUNCS(vfsmount, VFSMOUNT) +#define fsnotify_foreach_obj_type(type) \ + for (type = 0; type < FSNOTIFY_OBJ_TYPE_COUNT; type++) + /* * Inode / vfsmount point to this structure which tracks all marks attached to * the inode / vfsmount. The reference to inode / vfsmount is held by this -- cgit v1.2.3 From b249f5be6165811749b04a927806056c198222b1 Mon Sep 17 00:00:00 2001 From: Amir Goldstein Date: Fri, 20 Apr 2018 16:10:55 -0700 Subject: fsnotify: add fsnotify_add_inode_mark() wrappers Before changing the arguments of the functions fsnotify_add_mark() and fsnotify_add_mark_locked(), convert most callers to use a wrapper. Signed-off-by: Amir Goldstein Signed-off-by: Jan Kara --- include/linux/fsnotify_backend.h | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h index 763423bfa3d6..b38964a7a521 100644 --- a/include/linux/fsnotify_backend.h +++ b/include/linux/fsnotify_backend.h @@ -401,7 +401,21 @@ extern struct fsnotify_mark *fsnotify_find_mark( extern int fsnotify_add_mark(struct fsnotify_mark *mark, struct inode *inode, struct vfsmount *mnt, int allow_dups); extern int fsnotify_add_mark_locked(struct fsnotify_mark *mark, - struct inode *inode, struct vfsmount *mnt, int allow_dups); + struct inode *inode, struct vfsmount *mnt, + int allow_dups); +/* attach the mark to the inode */ +static inline int fsnotify_add_inode_mark(struct fsnotify_mark *mark, + struct inode *inode, + int allow_dups) +{ + return fsnotify_add_mark(mark, inode, NULL, allow_dups); +} +static inline int fsnotify_add_inode_mark_locked(struct fsnotify_mark *mark, + struct inode *inode, + int allow_dups) +{ + return fsnotify_add_mark_locked(mark, inode, NULL, allow_dups); +} /* given a group and a mark, flag mark to be freed when all references are dropped */ extern void fsnotify_destroy_mark(struct fsnotify_mark *mark, struct fsnotify_group *group); -- cgit v1.2.3 From ed582db639cfe65e2d901fca1be8fd813a18fec4 Mon Sep 17 00:00:00 2001 From: Fabrice Gasnier Date: Tue, 15 May 2018 17:19:17 +0200 Subject: iio: adc: stm32-dfsdm: include stm32-dfsdm-adc.h Fix the following sparse warnings: CHECK drivers/iio/adc/stm32-dfsdm-adc.c symbol 'stm32_dfsdm_get_buff_cb' was not declared. Should it be static? symbol 'stm32_dfsdm_release_buff_cb' was not declared. Should it be static? BTW, move interrupt.h to sort headers alphabetically. Signed-off-by: Fabrice Gasnier Signed-off-by: Jonathan Cameron --- include/linux/iio/adc/stm32-dfsdm-adc.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/iio/adc/stm32-dfsdm-adc.h b/include/linux/iio/adc/stm32-dfsdm-adc.h index e7dc7a542a4e..0da298b41737 100644 --- a/include/linux/iio/adc/stm32-dfsdm-adc.h +++ b/include/linux/iio/adc/stm32-dfsdm-adc.h @@ -9,6 +9,8 @@ #ifndef STM32_DFSDM_ADC_H #define STM32_DFSDM_ADC_H +#include + int stm32_dfsdm_get_buff_cb(struct iio_dev *iio_dev, int (*cb)(const void *data, size_t size, void *private), -- cgit v1.2.3 From 0788f1e97324d8378e860dc2560699ddc6f3aef9 Mon Sep 17 00:00:00 2001 From: Mark Rutland Date: Thu, 10 May 2018 11:35:15 +0100 Subject: arm_pmu: simplify arm_pmu::handle_irq The arm_pmu::handle_irq() callback has the same prototype as a generic IRQ handler, taking the IRQ number and a void pointer argument which it must convert to an arm_pmu pointer. This means that all arm_pmu::handle_irq() take an IRQ number they never use, and all must explicitly cast the void pointer to an arm_pmu pointer. Instead, let's change arm_pmu::handle_irq to take an arm_pmu pointer, allowing these casts to be removed. The redundant IRQ number parameter is also removed. Suggested-by: Hoeun Ryu Signed-off-by: Mark Rutland Cc: Will Deacon Signed-off-by: Will Deacon --- include/linux/perf/arm_pmu.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/perf/arm_pmu.h b/include/linux/perf/arm_pmu.h index 40036a57d072..ad5444491975 100644 --- a/include/linux/perf/arm_pmu.h +++ b/include/linux/perf/arm_pmu.h @@ -78,7 +78,7 @@ struct arm_pmu { struct pmu pmu; cpumask_t supported_cpus; char *name; - irqreturn_t (*handle_irq)(int irq_num, void *dev); + irqreturn_t (*handle_irq)(struct arm_pmu *pmu); void (*enable)(struct perf_event *event); void (*disable)(struct perf_event *event); int (*get_event_idx)(struct pmu_hw_events *hw_events, -- cgit v1.2.3 From da0086d018223529c686ef46db039533572418d8 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Sun, 25 Mar 2018 14:49:03 +0200 Subject: i2c: Export of_i2c_get_board_info() I3C busses have to know about all I2C devices connected on the I3C bus to properly initialize the I3C master, and I2C frames can't be sent on the bus until this initialization is done. We can't let the I2C core parse the DT and instantiate I2C devices as part of its i2c_add_adapter() procedure because, when done this way, I2C devices are directly registered to the device-model and might be attached to drivers which could in turn start sending frames on the bus, which won't work since, as said above, the bus is not yet initialized. Export of_i2c_register_device() in order to let the I3C core parse the I2C device nodes by itself and initialize the bus. Signed-off-by: Boris Brezillon Signed-off-by: Wolfram Sang --- include/linux/i2c.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux') diff --git a/include/linux/i2c.h b/include/linux/i2c.h index aeb655772ef8..254cd34eeae2 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -901,6 +901,9 @@ extern const struct of_device_id *i2c_of_match_device(const struct of_device_id *matches, struct i2c_client *client); +int of_i2c_get_board_info(struct device *dev, struct device_node *node, + struct i2c_board_info *info); + #else static inline struct i2c_client *of_find_i2c_device_by_node(struct device_node *node) @@ -925,6 +928,13 @@ static inline const struct of_device_id return NULL; } +static inline int of_i2c_get_board_info(struct device *dev, + struct device_node *node, + struct i2c_board_info *info) +{ + return -ENOTSUPP; +} + #endif /* CONFIG_OF */ #if IS_ENABLED(CONFIG_ACPI) -- cgit v1.2.3 From e7638488434415aa478e78435cac8f0365737638 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 16 May 2018 11:46:08 -0700 Subject: mm: introduce MEMORY_DEVICE_FS_DAX and CONFIG_DEV_PAGEMAP_OPS MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In preparation for fixing dax-dma-vs-unmap issues, filesystems need to be able to rely on the fact that they will get wakeups on dev_pagemap page-idle events. Introduce MEMORY_DEVICE_FS_DAX and generic_dax_page_free() as common indicator / infrastructure for dax filesytems to require. With this change there are no users of the MEMORY_DEVICE_HOST designation, so remove it. The HMM sub-system extended dev_pagemap to arrange a callback when a dev_pagemap managed page is freed. Since a dev_pagemap page is free / idle when its reference count is 1 it requires an additional branch to check the page-type at put_page() time. Given put_page() is a hot-path we do not want to incur that check if HMM is not in use, so a static branch is used to avoid that overhead when not necessary. Now, the FS_DAX implementation wants to reuse this mechanism for receiving dev_pagemap ->page_free() callbacks. Rework the HMM-specific static-key into a generic mechanism that either HMM or FS_DAX code paths can enable. For ARCH=um builds, and any other arch that lacks ZONE_DEVICE support, care must be taken to compile out the DEV_PAGEMAP_OPS infrastructure. However, we still need to support FS_DAX in the FS_DAX_LIMITED case implemented by the s390/dcssblk driver. Cc: Martin Schwidefsky Cc: Heiko Carstens Cc: Michal Hocko Reported-by: kbuild test robot Reported-by: Thomas Meyer Reported-by: Dave Jiang Cc: "Jérôme Glisse" Reviewed-by: Jan Kara Reviewed-by: Christoph Hellwig Signed-off-by: Dan Williams --- include/linux/memremap.h | 36 +++++++----------------- include/linux/mm.h | 71 ++++++++++++++++++++++++++++++++++++------------ 2 files changed, 63 insertions(+), 44 deletions(-) (limited to 'include/linux') diff --git a/include/linux/memremap.h b/include/linux/memremap.h index 7b4899c06f49..5ebfff65da4d 100644 --- a/include/linux/memremap.h +++ b/include/linux/memremap.h @@ -1,7 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0 */ #ifndef _LINUX_MEMREMAP_H_ #define _LINUX_MEMREMAP_H_ -#include #include #include @@ -30,13 +29,6 @@ struct vmem_altmap { * Specialize ZONE_DEVICE memory into multiple types each having differents * usage. * - * MEMORY_DEVICE_HOST: - * Persistent device memory (pmem): struct page might be allocated in different - * memory and architecture might want to perform special actions. It is similar - * to regular memory, in that the CPU can access it transparently. However, - * it is likely to have different bandwidth and latency than regular memory. - * See Documentation/nvdimm/nvdimm.txt for more information. - * * MEMORY_DEVICE_PRIVATE: * Device memory that is not directly addressable by the CPU: CPU can neither * read nor write private memory. In this case, we do still have struct pages @@ -53,11 +45,19 @@ struct vmem_altmap { * driver can hotplug the device memory using ZONE_DEVICE and with that memory * type. Any page of a process can be migrated to such memory. However no one * should be allow to pin such memory so that it can always be evicted. + * + * MEMORY_DEVICE_FS_DAX: + * Host memory that has similar access semantics as System RAM i.e. DMA + * coherent and supports page pinning. In support of coordinating page + * pinning vs other operations MEMORY_DEVICE_FS_DAX arranges for a + * wakeup event whenever a page is unpinned and becomes idle. This + * wakeup is used to coordinate physical address space management (ex: + * fs truncate/hole punch) vs pinned pages (ex: device dma). */ enum memory_type { - MEMORY_DEVICE_HOST = 0, - MEMORY_DEVICE_PRIVATE, + MEMORY_DEVICE_PRIVATE = 1, MEMORY_DEVICE_PUBLIC, + MEMORY_DEVICE_FS_DAX, }; /* @@ -129,8 +129,6 @@ struct dev_pagemap *get_dev_pagemap(unsigned long pfn, unsigned long vmem_altmap_offset(struct vmem_altmap *altmap); void vmem_altmap_free(struct vmem_altmap *altmap, unsigned long nr_pfns); - -static inline bool is_zone_device_page(const struct page *page); #else static inline void *devm_memremap_pages(struct device *dev, struct dev_pagemap *pgmap) @@ -161,20 +159,6 @@ static inline void vmem_altmap_free(struct vmem_altmap *altmap, } #endif /* CONFIG_ZONE_DEVICE */ -#if defined(CONFIG_DEVICE_PRIVATE) || defined(CONFIG_DEVICE_PUBLIC) -static inline bool is_device_private_page(const struct page *page) -{ - return is_zone_device_page(page) && - page->pgmap->type == MEMORY_DEVICE_PRIVATE; -} - -static inline bool is_device_public_page(const struct page *page) -{ - return is_zone_device_page(page) && - page->pgmap->type == MEMORY_DEVICE_PUBLIC; -} -#endif /* CONFIG_DEVICE_PRIVATE || CONFIG_DEVICE_PUBLIC */ - static inline void put_dev_pagemap(struct dev_pagemap *pgmap) { if (pgmap) diff --git a/include/linux/mm.h b/include/linux/mm.h index 1ac1f06a4be6..6e19265ee8f8 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -821,27 +821,65 @@ static inline bool is_zone_device_page(const struct page *page) } #endif -#if defined(CONFIG_DEVICE_PRIVATE) || defined(CONFIG_DEVICE_PUBLIC) -void put_zone_device_private_or_public_page(struct page *page); -DECLARE_STATIC_KEY_FALSE(device_private_key); -#define IS_HMM_ENABLED static_branch_unlikely(&device_private_key) -static inline bool is_device_private_page(const struct page *page); -static inline bool is_device_public_page(const struct page *page); -#else /* CONFIG_DEVICE_PRIVATE || CONFIG_DEVICE_PUBLIC */ -static inline void put_zone_device_private_or_public_page(struct page *page) +#ifdef CONFIG_DEV_PAGEMAP_OPS +void dev_pagemap_get_ops(void); +void dev_pagemap_put_ops(void); +void __put_devmap_managed_page(struct page *page); +DECLARE_STATIC_KEY_FALSE(devmap_managed_key); +static inline bool put_devmap_managed_page(struct page *page) +{ + if (!static_branch_unlikely(&devmap_managed_key)) + return false; + if (!is_zone_device_page(page)) + return false; + switch (page->pgmap->type) { + case MEMORY_DEVICE_PRIVATE: + case MEMORY_DEVICE_PUBLIC: + case MEMORY_DEVICE_FS_DAX: + __put_devmap_managed_page(page); + return true; + default: + break; + } + return false; +} + +static inline bool is_device_private_page(const struct page *page) { + return is_zone_device_page(page) && + page->pgmap->type == MEMORY_DEVICE_PRIVATE; } -#define IS_HMM_ENABLED 0 + +static inline bool is_device_public_page(const struct page *page) +{ + return is_zone_device_page(page) && + page->pgmap->type == MEMORY_DEVICE_PUBLIC; +} + +#else /* CONFIG_DEV_PAGEMAP_OPS */ +static inline void dev_pagemap_get_ops(void) +{ +} + +static inline void dev_pagemap_put_ops(void) +{ +} + +static inline bool put_devmap_managed_page(struct page *page) +{ + return false; +} + static inline bool is_device_private_page(const struct page *page) { return false; } + static inline bool is_device_public_page(const struct page *page) { return false; } -#endif /* CONFIG_DEVICE_PRIVATE || CONFIG_DEVICE_PUBLIC */ - +#endif /* CONFIG_DEV_PAGEMAP_OPS */ static inline void get_page(struct page *page) { @@ -859,16 +897,13 @@ static inline void put_page(struct page *page) page = compound_head(page); /* - * For private device pages we need to catch refcount transition from - * 2 to 1, when refcount reach one it means the private device page is - * free and we need to inform the device driver through callback. See + * For devmap managed pages we need to catch refcount transition from + * 2 to 1, when refcount reach one it means the page is free and we + * need to inform the device driver through callback. See * include/linux/memremap.h and HMM for details. */ - if (IS_HMM_ENABLED && unlikely(is_device_private_page(page) || - unlikely(is_device_public_page(page)))) { - put_zone_device_private_or_public_page(page); + if (put_devmap_managed_page(page)) return; - } if (put_page_testzero(page)) __put_page(page); -- cgit v1.2.3 From 5fac7408d828719db6d3fdba63e3c3726a6d1ee5 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 9 Mar 2018 17:44:31 -0800 Subject: mm, fs, dax: handle layout changes to pinned dax mappings Background: get_user_pages() in the filesystem pins file backed memory pages for access by devices performing dma. However, it only pins the memory pages not the page-to-file offset association. If a file is truncated the pages are mapped out of the file and dma may continue indefinitely into a page that is owned by a device driver. This breaks coherency of the file vs dma, but the assumption is that if userspace wants the file-space truncated it does not matter what data is inbound from the device, it is not relevant anymore. The only expectation is that dma can safely continue while the filesystem reallocates the block(s). Problem: This expectation that dma can safely continue while the filesystem changes the block map is broken by dax. With dax the target dma page *is* the filesystem block. The model of leaving the page pinned for dma, but truncating the file block out of the file, means that the filesytem is free to reallocate a block under active dma to another file and now the expected data-incoherency situation has turned into active data-corruption. Solution: Defer all filesystem operations (fallocate(), truncate()) on a dax mode file while any page/block in the file is under active dma. This solution assumes that dma is transient. Cases where dma operations are known to not be transient, like RDMA, have been explicitly disabled via commits like 5f1d43de5416 "IB/core: disable memory registration of filesystem-dax vmas". The dax_layout_busy_page() routine is called by filesystems with a lock held against mm faults (i_mmap_lock) to find pinned / busy dax pages. The process of looking up a busy page invalidates all mappings to trigger any subsequent get_user_pages() to block on i_mmap_lock. The filesystem continues to call dax_layout_busy_page() until it finally returns no more active pages. This approach assumes that the page pinning is transient, if that assumption is violated the system would have likely hung from the uncompleted I/O. Cc: Jeff Moyer Cc: Dave Chinner Cc: Matthew Wilcox Cc: Alexander Viro Cc: "Darrick J. Wong" Cc: Ross Zwisler Cc: Dave Hansen Cc: Andrew Morton Reported-by: Christoph Hellwig Reviewed-by: Christoph Hellwig Reviewed-by: Jan Kara Signed-off-by: Dan Williams --- include/linux/dax.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/dax.h b/include/linux/dax.h index f9eb22ad341e..25bab6abb695 100644 --- a/include/linux/dax.h +++ b/include/linux/dax.h @@ -83,6 +83,8 @@ static inline void fs_put_dax(struct dax_device *dax_dev) struct dax_device *fs_dax_get_by_bdev(struct block_device *bdev); int dax_writeback_mapping_range(struct address_space *mapping, struct block_device *bdev, struct writeback_control *wbc); + +struct page *dax_layout_busy_page(struct address_space *mapping); #else static inline int bdev_dax_supported(struct super_block *sb, int blocksize) { @@ -103,6 +105,11 @@ static inline struct dax_device *fs_dax_get_by_bdev(struct block_device *bdev) return NULL; } +static inline struct page *dax_layout_busy_page(struct address_space *mapping) +{ + return NULL; +} + static inline int dax_writeback_mapping_range(struct address_space *mapping, struct block_device *bdev, struct writeback_control *wbc) { -- cgit v1.2.3 From 522239b445a2de988edb81672963708a6aaf9046 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 22 May 2018 23:17:03 -0700 Subject: uio, lib: Fix CONFIG_ARCH_HAS_UACCESS_MCSAFE compilation Add a common Kconfig CONFIG_ARCH_HAS_UACCESS_MCSAFE that archs can optionally select, and fixup the declaration of _copy_to_iter_mcsafe(). Fixes: 8780356ef630 ("x86/asm/memcpy_mcsafe: Define copy_to_iter_mcsafe()") Signed-off-by: Dan Williams --- include/linux/uio.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/uio.h b/include/linux/uio.h index f5766e853a77..409c845d4cd3 100644 --- a/include/linux/uio.h +++ b/include/linux/uio.h @@ -155,7 +155,7 @@ size_t _copy_from_iter_flushcache(void *addr, size_t bytes, struct iov_iter *i); #endif #ifdef CONFIG_ARCH_HAS_UACCESS_MCSAFE -size_t _copy_to_iter_mcsafe(void *addr, size_t bytes, struct iov_iter *i); +size_t _copy_to_iter_mcsafe(const void *addr, size_t bytes, struct iov_iter *i); #else #define _copy_to_iter_mcsafe _copy_to_iter #endif -- cgit v1.2.3 From b3a9a0c36e1f7b9e2e6cf965c2bb973624f2b3b9 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 2 May 2018 06:46:33 -0700 Subject: dax: Introduce a ->copy_to_iter dax operation Similar to the ->copy_from_iter() operation, a platform may want to deploy an architecture or device specific routine for handling reads from a dax_device like /dev/pmemX. On x86 this routine will point to a machine check safe version of copy_to_iter(). For now, add the plumbing to device-mapper and the dax core. Cc: Ross Zwisler Cc: Mike Snitzer Cc: Christoph Hellwig Signed-off-by: Dan Williams --- include/linux/dax.h | 5 +++++ include/linux/device-mapper.h | 5 +++-- 2 files changed, 8 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/dax.h b/include/linux/dax.h index f9eb22ad341e..a43b396fb336 100644 --- a/include/linux/dax.h +++ b/include/linux/dax.h @@ -20,6 +20,9 @@ struct dax_operations { /* copy_from_iter: required operation for fs-dax direct-i/o */ size_t (*copy_from_iter)(struct dax_device *, pgoff_t, void *, size_t, struct iov_iter *); + /* copy_to_iter: required operation for fs-dax direct-i/o */ + size_t (*copy_to_iter)(struct dax_device *, pgoff_t, void *, size_t, + struct iov_iter *); }; extern struct attribute_group dax_attribute_group; @@ -118,6 +121,8 @@ long dax_direct_access(struct dax_device *dax_dev, pgoff_t pgoff, long nr_pages, void **kaddr, pfn_t *pfn); size_t dax_copy_from_iter(struct dax_device *dax_dev, pgoff_t pgoff, void *addr, size_t bytes, struct iov_iter *i); +size_t dax_copy_to_iter(struct dax_device *dax_dev, pgoff_t pgoff, void *addr, + size_t bytes, struct iov_iter *i); void dax_flush(struct dax_device *dax_dev, void *addr, size_t size); ssize_t dax_iomap_rw(struct kiocb *iocb, struct iov_iter *iter, diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h index 31fef7c34185..6fb0808e87c8 100644 --- a/include/linux/device-mapper.h +++ b/include/linux/device-mapper.h @@ -133,7 +133,7 @@ typedef int (*dm_busy_fn) (struct dm_target *ti); */ typedef long (*dm_dax_direct_access_fn) (struct dm_target *ti, pgoff_t pgoff, long nr_pages, void **kaddr, pfn_t *pfn); -typedef size_t (*dm_dax_copy_from_iter_fn)(struct dm_target *ti, pgoff_t pgoff, +typedef size_t (*dm_dax_copy_iter_fn)(struct dm_target *ti, pgoff_t pgoff, void *addr, size_t bytes, struct iov_iter *i); #define PAGE_SECTORS (PAGE_SIZE / 512) @@ -184,7 +184,8 @@ struct target_type { dm_iterate_devices_fn iterate_devices; dm_io_hints_fn io_hints; dm_dax_direct_access_fn direct_access; - dm_dax_copy_from_iter_fn dax_copy_from_iter; + dm_dax_copy_iter_fn dax_copy_from_iter; + dm_dax_copy_iter_fn dax_copy_to_iter; /* For internal device-mapper use. */ struct list_head list; -- cgit v1.2.3 From 3027743f83f867d85662f5134e835c2e199cb9be Mon Sep 17 00:00:00 2001 From: Laura Abbott Date: Mon, 21 May 2018 10:57:07 -0700 Subject: gpio: Remove VLA from gpiolib The new challenge is to remove VLAs from the kernel (see https://lkml.org/lkml/2018/3/7/621) to eventually turn on -Wvla. Using a kmalloc array is the easy way to fix this but kmalloc is still more expensive than stack allocation. Introduce a fast path with a fixed size stack array to cover most chip with gpios below some fixed amount. The slow path dynamically allocates an array to cover those chips with a large number of gpios. Reviewed-by: Geert Uytterhoeven Reviewed-by: Phil Reid Reviewed-and-tested-by: Lukas Wunner Signed-off-by: Lukas Wunner Signed-off-by: Laura Abbott Reviewed-by: Andy Shevchenko Signed-off-by: Linus Walleij --- include/linux/gpio/consumer.h | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/gpio/consumer.h b/include/linux/gpio/consumer.h index dbd065963296..243112c7fa7d 100644 --- a/include/linux/gpio/consumer.h +++ b/include/linux/gpio/consumer.h @@ -116,7 +116,7 @@ int gpiod_get_raw_array_value(unsigned int array_size, struct gpio_desc **desc_array, int *value_array); void gpiod_set_raw_value(struct gpio_desc *desc, int value); -void gpiod_set_raw_array_value(unsigned int array_size, +int gpiod_set_raw_array_value(unsigned int array_size, struct gpio_desc **desc_array, int *value_array); @@ -134,7 +134,7 @@ int gpiod_get_raw_array_value_cansleep(unsigned int array_size, struct gpio_desc **desc_array, int *value_array); void gpiod_set_raw_value_cansleep(struct gpio_desc *desc, int value); -void gpiod_set_raw_array_value_cansleep(unsigned int array_size, +int gpiod_set_raw_array_value_cansleep(unsigned int array_size, struct gpio_desc **desc_array, int *value_array); @@ -369,12 +369,13 @@ static inline void gpiod_set_raw_value(struct gpio_desc *desc, int value) /* GPIO can never have been requested */ WARN_ON(1); } -static inline void gpiod_set_raw_array_value(unsigned int array_size, +static inline int gpiod_set_raw_array_value(unsigned int array_size, struct gpio_desc **desc_array, int *value_array) { /* GPIO can never have been requested */ WARN_ON(1); + return 0; } static inline int gpiod_get_value_cansleep(const struct gpio_desc *desc) @@ -423,12 +424,13 @@ static inline void gpiod_set_raw_value_cansleep(struct gpio_desc *desc, /* GPIO can never have been requested */ WARN_ON(1); } -static inline void gpiod_set_raw_array_value_cansleep(unsigned int array_size, +static inline int gpiod_set_raw_array_value_cansleep(unsigned int array_size, struct gpio_desc **desc_array, int *value_array) { /* GPIO can never have been requested */ WARN_ON(1); + return 0; } static inline int gpiod_set_debounce(struct gpio_desc *desc, unsigned debounce) -- cgit v1.2.3 From 2468f0d51548b23507ceb3bba5f4e3acaea117ba Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 14 May 2018 10:06:28 +0200 Subject: regulator: lp8788-ldo: Pass descriptor instead of GPIO number Instead of passing a global GPIO number, pass a descriptor looked up with the standard devm_gpiod_get_index_optional() call. This driver has supported passing a LDO enable GPIO for years, yet this facility has never been put to use in the upstream kernel. If someone desires to put in place GPIO control for the LDOs, this can be done by adding a GPIO descriptor table in the MFD nexus in drivers/mfd/lp8788.c for the LDO device when spawning the MFD children, or using a board file. Signed-off-by: Linus Walleij Acked-by: Lee Jones Signed-off-by: Mark Brown --- include/linux/mfd/lp8788.h | 16 ---------------- 1 file changed, 16 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/lp8788.h b/include/linux/mfd/lp8788.h index 786bf6679a28..2010e0de3e34 100644 --- a/include/linux/mfd/lp8788.h +++ b/include/linux/mfd/lp8788.h @@ -181,20 +181,6 @@ struct lp8788_buck2_dvs { enum lp8788_dvs_sel vsel; }; -/* - * struct lp8788_ldo_enable_pin - * - * Basically, all LDOs are enabled through the I2C commands. - * But ALDO 1 ~ 5, 7, DLDO 7, 9, 11 can be enabled by external gpio pins. - * - * @gpio : gpio number which is used for enabling ldos - * @init_state : initial gpio state (ex. GPIOF_OUT_INIT_LOW) - */ -struct lp8788_ldo_enable_pin { - int gpio; - int init_state; -}; - /* * struct lp8788_chg_param * @addr : charging control register address (range : 0x11 ~ 0x1C) @@ -288,7 +274,6 @@ struct lp8788_vib_platform_data { * @aldo_data : regulator initial data for analog ldo * @buck1_dvs : gpio configurations for buck1 dvs * @buck2_dvs : gpio configurations for buck2 dvs - * @ldo_pin : gpio configurations for enabling LDOs * @chg_pdata : platform data for charger driver * @alarm_sel : rtc alarm selection (1 or 2) * @bl_pdata : configurable data for backlight driver @@ -306,7 +291,6 @@ struct lp8788_platform_data { struct regulator_init_data *aldo_data[LP8788_NUM_ALDOS]; struct lp8788_buck1_dvs *buck1_dvs; struct lp8788_buck2_dvs *buck2_dvs; - struct lp8788_ldo_enable_pin *ldo_pin[EN_LDOS_MAX]; /* charger */ struct lp8788_charger_platform_data *chg_pdata; -- cgit v1.2.3 From d7a261c2d1f233260c48651b4e68987ce1206139 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 14 May 2018 10:06:29 +0200 Subject: regulator: max8952: Pass descriptor instead of GPIO number Instead of passing a global GPIO number for the enable GPIO, pass a descriptor looked up with the standard devm_gpiod_get_optional() call. All users of this regulator use device tree so the transition is pretty smooth. Signed-off-by: Linus Walleij Signed-off-by: Mark Brown --- include/linux/regulator/max8952.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/regulator/max8952.h b/include/linux/regulator/max8952.h index 4dbb63a1d4ab..686c42c041b5 100644 --- a/include/linux/regulator/max8952.h +++ b/include/linux/regulator/max8952.h @@ -120,7 +120,6 @@ enum { struct max8952_platform_data { int gpio_vid0; int gpio_vid1; - int gpio_en; u32 default_mode; u32 dvs_mode[MAX8952_NUM_DVS_MODE]; /* MAX8952_DVS_MODEx_XXXXmV */ -- cgit v1.2.3 From 9ae5cc75ceaacf69cc50b9fd4713276c2aa62eb9 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 14 May 2018 10:06:32 +0200 Subject: regulator: s5m8767: Pass descriptor instead of GPIO number Instead of passing a global GPIO number for the enable GPIO, pass a descriptor looked up from the device tree node for the regulator. This regulator supports passing platform data, but enable/sleep regulators are looked up from the device tree exclusively, so we can need not touch other files. Signed-off-by: Linus Walleij Acked-by: Lee Jones Signed-off-by: Mark Brown --- include/linux/mfd/samsung/core.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h index 5a23dd4df432..28f4ae76271d 100644 --- a/include/linux/mfd/samsung/core.h +++ b/include/linux/mfd/samsung/core.h @@ -39,6 +39,8 @@ #define STEP_12_5_MV 12500 #define STEP_6_25_MV 6250 +struct gpio_desc; + enum sec_device_type { S5M8751X, S5M8763X, @@ -151,7 +153,7 @@ struct sec_regulator_data { int id; struct regulator_init_data *initdata; struct device_node *reg_node; - int ext_control_gpio; + struct gpio_desc *ext_control_gpiod; }; /* -- cgit v1.2.3 From 3012e81446d011c1bd99812e562e2292f21060fb Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 14 May 2018 10:06:33 +0200 Subject: regulator: tps65090: Pass descriptor instead of GPIO number Instead of passing a global GPIO number for the enable GPIO, pass a descriptor looked up from the device tree node for the regulator. This regulator supports passing platform data, but enable/sleep regulators are looked up from the device tree exclusively, so we can need not touch other files. Signed-off-by: Linus Walleij Acked-by: Lee Jones Signed-off-by: Mark Brown --- include/linux/mfd/tps65090.h | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/tps65090.h b/include/linux/mfd/tps65090.h index 67d144b3b8f9..f05bf4a146e2 100644 --- a/include/linux/mfd/tps65090.h +++ b/include/linux/mfd/tps65090.h @@ -83,6 +83,8 @@ enum { #define TPS65090_MAX_REG TPS65090_REG_AD_OUT2 #define TPS65090_NUM_REGS (TPS65090_MAX_REG + 1) +struct gpio_desc; + struct tps65090 { struct device *dev; struct regmap *rmap; @@ -95,8 +97,8 @@ struct tps65090 { * @reg_init_data: The regulator init data. * @enable_ext_control: Enable extrenal control or not. Only available for * DCDC1, DCDC2 and DCDC3. - * @gpio: Gpio number if external control is enabled and controlled through - * gpio. + * @gpiod: Gpio descriptor if external control is enabled and controlled through + * gpio * @overcurrent_wait_valid: True if the overcurrent_wait should be applied. * @overcurrent_wait: Value to set as the overcurrent wait time. This is the * actual bitfield value, not a time in ms (valid value are 0 - 3). @@ -104,7 +106,7 @@ struct tps65090 { struct tps65090_regulator_plat_data { struct regulator_init_data *reg_init_data; bool enable_ext_control; - int gpio; + struct gpio_desc *gpiod; bool overcurrent_wait_valid; int overcurrent_wait; }; -- cgit v1.2.3 From eebba71e1cb4f3464645c4b106f8ccc31bc5cd11 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Fri, 11 May 2018 12:03:16 -0500 Subject: hwspinlock/core: Switch to SPDX license identifier Use the appropriate SPDX license identifier in the Hwspinlock core driver source files and drop the previous boilerplate license text. Signed-off-by: Suman Anna Signed-off-by: Bjorn Andersson --- include/linux/hwspinlock.h | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) (limited to 'include/linux') diff --git a/include/linux/hwspinlock.h b/include/linux/hwspinlock.h index fe450ee58d55..57537e67b468 100644 --- a/include/linux/hwspinlock.h +++ b/include/linux/hwspinlock.h @@ -1,18 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Hardware spinlock public header * * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com * * Contact: Ohad Ben-Cohen - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #ifndef __LINUX_HWSPINLOCK_H -- cgit v1.2.3 From 93ee37c2a6a97e5d358af2d8f0510817b6e75679 Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Wed, 11 Apr 2018 17:54:20 +0100 Subject: thread_info: Add update_thread_flag() helpers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There are a number of bits of code sprinkled around the kernel to set a thread flag if a certain condition is true, and clear it otherwise. To help make those call sites terser and less cumbersome, this patch adds a new family of thread flag manipulators update*_thread_flag([...,] flag, cond) which do the equivalent of: if (cond) set*_thread_flag([...,] flag); else clear*_thread_flag([...,] flag); Signed-off-by: Dave Martin Reviewed-by: Alex Bennée Acked-by: Steven Rostedt (VMware) Acked-by: Marc Zyngier Acked-by: Catalin Marinas Acked-by: Peter Zijlstra (Intel) Cc: Ingo Molnar Cc: Oleg Nesterov Signed-off-by: Marc Zyngier --- include/linux/sched.h | 6 ++++++ include/linux/thread_info.h | 11 +++++++++++ 2 files changed, 17 insertions(+) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index b3d697f3b573..c2c305199721 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1578,6 +1578,12 @@ static inline void clear_tsk_thread_flag(struct task_struct *tsk, int flag) clear_ti_thread_flag(task_thread_info(tsk), flag); } +static inline void update_tsk_thread_flag(struct task_struct *tsk, int flag, + bool value) +{ + update_ti_thread_flag(task_thread_info(tsk), flag, value); +} + static inline int test_and_set_tsk_thread_flag(struct task_struct *tsk, int flag) { return test_and_set_ti_thread_flag(task_thread_info(tsk), flag); diff --git a/include/linux/thread_info.h b/include/linux/thread_info.h index cf2862bd134a..8d8821b3689a 100644 --- a/include/linux/thread_info.h +++ b/include/linux/thread_info.h @@ -60,6 +60,15 @@ static inline void clear_ti_thread_flag(struct thread_info *ti, int flag) clear_bit(flag, (unsigned long *)&ti->flags); } +static inline void update_ti_thread_flag(struct thread_info *ti, int flag, + bool value) +{ + if (value) + set_ti_thread_flag(ti, flag); + else + clear_ti_thread_flag(ti, flag); +} + static inline int test_and_set_ti_thread_flag(struct thread_info *ti, int flag) { return test_and_set_bit(flag, (unsigned long *)&ti->flags); @@ -79,6 +88,8 @@ static inline int test_ti_thread_flag(struct thread_info *ti, int flag) set_ti_thread_flag(current_thread_info(), flag) #define clear_thread_flag(flag) \ clear_ti_thread_flag(current_thread_info(), flag) +#define update_thread_flag(flag, value) \ + update_ti_thread_flag(current_thread_info(), flag, value) #define test_and_set_thread_flag(flag) \ test_and_set_ti_thread_flag(current_thread_info(), flag) #define test_and_clear_thread_flag(flag) \ -- cgit v1.2.3 From bd2a6394fd2d3ea528d4b9c67f829e35f1f5d5dd Mon Sep 17 00:00:00 2001 From: Christoffer Dall Date: Fri, 23 Feb 2018 17:23:57 +0100 Subject: KVM: arm/arm64: Introduce kvm_arch_vcpu_run_pid_change MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit KVM/ARM differs from other architectures in having to maintain an additional virtual address space from that of the host and the guest, because we split the execution of KVM across both EL1 and EL2. This results in a need to explicitly map data structures into EL2 (hyp) which are accessed from the hyp code. As we are about to be more clever with our FPSIMD handling on arm64, which stores data in the task struct and uses thread_info flags, we will have to map parts of the currently executing task struct into the EL2 virtual address space. However, we don't want to do this on every KVM_RUN, because it is a fairly expensive operation to walk the page tables, and the common execution mode is to map a single thread to a VCPU. By introducing a hook that architectures can select with HAVE_KVM_VCPU_RUN_PID_CHANGE, we do not introduce overhead for other architectures, but have a simple way to only map the data we need when required for arm64. This patch introduces the framework only, and wires it up in the arm/arm64 KVM common code. No functional change. Signed-off-by: Christoffer Dall Signed-off-by: Dave Martin Reviewed-by: Marc Zyngier Reviewed-by: Alex Bennée Signed-off-by: Marc Zyngier --- include/linux/kvm_host.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/linux') diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 6930c63126c7..4268ace60bf1 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -1276,4 +1276,13 @@ static inline long kvm_arch_vcpu_async_ioctl(struct file *filp, void kvm_arch_mmu_notifier_invalidate_range(struct kvm *kvm, unsigned long start, unsigned long end); +#ifdef CONFIG_HAVE_KVM_VCPU_RUN_PID_CHANGE +int kvm_arch_vcpu_run_pid_change(struct kvm_vcpu *vcpu); +#else +static inline int kvm_arch_vcpu_run_pid_change(struct kvm_vcpu *vcpu) +{ + return 0; +} +#endif /* CONFIG_HAVE_KVM_VCPU_RUN_PID_CHANGE */ + #endif -- cgit v1.2.3 From 6d361c1db7b69fddf5748cf212169ab57bb13a6e Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Wed, 25 Apr 2018 10:18:20 -0500 Subject: soc: qcom: smem: introduce qcom_smem_virt_to_phys() Create function qcom_smem_virt_to_phys(), which returns the physical address corresponding to a given SMEM item's virtual address. This feature is required for a driver that will soon be out for review. Signed-off-by: Alex Elder Reviewed-by: Bjorn Andersson Signed-off-by: Andy Gross --- include/linux/soc/qcom/smem.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/soc/qcom/smem.h b/include/linux/soc/qcom/smem.h index c1657ed27b30..86e1b358688a 100644 --- a/include/linux/soc/qcom/smem.h +++ b/include/linux/soc/qcom/smem.h @@ -9,4 +9,6 @@ void *qcom_smem_get(unsigned host, unsigned item, size_t *size); int qcom_smem_get_free_space(unsigned host); +phys_addr_t qcom_smem_virt_to_phys(void *p); + #endif -- cgit v1.2.3 From 8efd6894ff089adeeac7cb9f32125b85d963d1bc Mon Sep 17 00:00:00 2001 From: Deepa Dinamani Date: Sun, 22 Apr 2018 20:18:46 -0700 Subject: fs: add timespec64_truncate() As vfs moves to using struct timespec64 to represent times, update the argument to timespec_truncate() to use struct timespec64. Also change the name of the function. The rest of the implementation logic is the same. Move this to fs/inode.c instead of kernel/time/time.c as all the users of this api are filesystems. Signed-off-by: Deepa Dinamani Cc: --- include/linux/fs.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 760d8da1b6c7..7f6997e0dabf 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1476,6 +1476,7 @@ static inline void i_gid_write(struct inode *inode, gid_t gid) inode->i_gid = make_kgid(inode->i_sb->s_user_ns, gid); } +extern struct timespec64 timespec64_trunc(struct timespec64 t, unsigned gran); extern struct timespec current_time(struct inode *inode); /* -- cgit v1.2.3 From 7053df4edb3ae3ae15c316fe49122c0b3936e9dd Mon Sep 17 00:00:00 2001 From: Vitaly Kuznetsov Date: Wed, 16 May 2018 17:21:28 +0200 Subject: KVM: introduce kvm_make_vcpus_request_mask() API MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Hyper-V style PV TLB flush hypercalls inmplementation will use this API. To avoid memory allocation in CONFIG_CPUMASK_OFFSTACK case add cpumask_var_t argument. Signed-off-by: Vitaly Kuznetsov Signed-off-by: Radim Krčmář --- include/linux/kvm_host.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 6d6e79c59e68..14e710d639c7 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -730,6 +730,9 @@ void kvm_put_guest_fpu(struct kvm_vcpu *vcpu); void kvm_flush_remote_tlbs(struct kvm *kvm); void kvm_reload_remote_mmus(struct kvm *kvm); + +bool kvm_make_vcpus_request_mask(struct kvm *kvm, unsigned int req, + unsigned long *vcpu_bitmap, cpumask_var_t tmp); bool kvm_make_all_cpus_request(struct kvm *kvm, unsigned int req); long kvm_arch_dev_ioctl(struct file *filp, -- cgit v1.2.3 From 02f6bf8717a359cabe042c632f3d03fc772450bf Mon Sep 17 00:00:00 2001 From: Phil Edworthy Date: Fri, 25 May 2018 16:11:34 +0100 Subject: gpio: dwapb: Fix rework support for 1 interrupt per port A GPIO Commit da069d5d2b814d9887989dcdb29fb0202eac8b38 ("gpio: dwapb: Rework support for 1 interrupt per port A GPIO"), was an incremental patch that was supposed to provide the delta between v5 and v6 patch set for adding support for 1 interupt per port A GPIO. v5 was applied, then some other feedback came afterwards. However, in my haste I managed to drop the changes made to dwapb_port_property struct. This patch includes those missing changes. Signed-off-by: Phil Edworthy Signed-off-by: Linus Walleij --- include/linux/platform_data/gpio-dwapb.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/platform_data/gpio-dwapb.h b/include/linux/platform_data/gpio-dwapb.h index 5a52d69c13f3..419cfacb4b42 100644 --- a/include/linux/platform_data/gpio-dwapb.h +++ b/include/linux/platform_data/gpio-dwapb.h @@ -19,7 +19,7 @@ struct dwapb_port_property { unsigned int idx; unsigned int ngpio; unsigned int gpio_base; - unsigned int irq[32]; + int irq[32]; bool has_irq; bool irq_shared; }; -- cgit v1.2.3 From ca1b7d3daff43a269fb7a0479055ac5b741638d8 Mon Sep 17 00:00:00 2001 From: Eric Long Date: Wed, 23 May 2018 17:31:11 +0800 Subject: dmaengine: sprd: Add Spreadtrum DMA configuration This patch adds the 'device_config' and 'device_prep_slave_sg' interfaces for users to configure DMA, as well as adding one 'struct sprd_dma_config' structure to save Spreadtrum DMA configuration for each DMA channel. Signed-off-by: Eric Long Signed-off-by: Baolin Wang Signed-off-by: Vinod Koul --- include/linux/dma/sprd-dma.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/dma/sprd-dma.h b/include/linux/dma/sprd-dma.h index c545162e725b..b0115e340fbc 100644 --- a/include/linux/dma/sprd-dma.h +++ b/include/linux/dma/sprd-dma.h @@ -3,6 +3,10 @@ #ifndef _SPRD_DMA_H_ #define _SPRD_DMA_H_ +#define SPRD_DMA_REQ_SHIFT 16 +#define SPRD_DMA_FLAGS(req_mode, int_type) \ + ((req_mode) << SPRD_DMA_REQ_SHIFT | (int_type)) + /* * enum sprd_dma_req_mode: define the DMA request mode * @SPRD_DMA_FRAG_REQ: fragment request mode -- cgit v1.2.3 From 44d99d737279eb2021b2c66df3cee6f8a21ff4e4 Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Wed, 18 Apr 2018 12:24:00 +0200 Subject: mfd: cros_ec: Don't try to grab log when suspended We should stop our worker thread while we're suspended. If we don't then we'll get messages like: cros-ec-spi spi5.0: spi transfer failed: -108 cros-ec-spi spi5.0: cs-deassert spi transfer failed: -108 cros-ec-ctl cros-ec-ctl.0.auto: EC communication failed Signed-off-by: Douglas Anderson Signed-off-by: Enric Balletbo i Serra Reviewed-by: Andy Shevchenko Signed-off-by: Lee Jones --- include/linux/mfd/cros_ec.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h index 4ff0cec979b0..b8e750d91200 100644 --- a/include/linux/mfd/cros_ec.h +++ b/include/linux/mfd/cros_ec.h @@ -327,5 +327,7 @@ extern struct attribute_group cros_ec_vbc_attr_group; /* debugfs stuff */ int cros_ec_debugfs_init(struct cros_ec_dev *ec); void cros_ec_debugfs_remove(struct cros_ec_dev *ec); +void cros_ec_debugfs_suspend(struct cros_ec_dev *ec); +void cros_ec_debugfs_resume(struct cros_ec_dev *ec); #endif /* __LINUX_MFD_CROS_EC_H */ -- cgit v1.2.3 From 6059577cb28d8b15d2b7dad51eb90d885f1ed9ab Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 14 May 2018 10:06:22 +0200 Subject: regulator: fixed: Convert to use GPIO descriptor only As we augmented the regulator core to accept a GPIO descriptor instead of a GPIO number, we can augment the fixed GPIO regulator to look up and pass that descriptor directly from device tree or board GPIO descriptor look up tables. Some boards just auto-enumerate their fixed regulator platform devices and I have assumed they get names like "fixed-regulator.0" but it's pretty hard to guess this. I need some testing from board maintainers to be sure. Other boards are straight forward, using just plain "fixed-regulator" (ID -1) or "fixed-regulator.1" hammering down the device ID. The OMAP didn't have proper label names on its GPIO chips so I have fixed this with a separate patch to the GPIO tree, see commit 088413bc0bd5f5fb66ca22a19d66a49d7154ba4c "gpio: omap: Give unique labels to each GPIO bank/chip" It seems the da9055 and da9211 has never got around to actually passing any enable gpio into its platform data (not the in-tree code anyway) so we can just decide to simply pass a descriptor instead. The fixed GPIO-controlled regulator in mach-pxa/ezx.c was confusingly named "*_dummy_supply_device" while it is a very real device backed by a GPIO line. There is nothing dummy about it at all, so I renamed it with the infix *_regulator_* as part of this patch set. For the patch hunk hitting arch/blackfin I would say I do not expect testing, review or ACKs anymore so if it works, it works. The hunk hitting the x86 BCM43xx driver is especially tricky as the number comes out of SFI which is a mystery to me. I definately need someone to look at this. (Hi Andy.) Cc: Andy Shevchenko # Check the x86 BCM stuff Cc: Alexander Shiyan # i.MX boards user Cc: Haojian Zhuang # MMP2 maintainer Cc: Aaro Koskinen # OMAP1 maintainer Cc: Tony Lindgren # OMAP1,2,3 maintainer Cc: Mike Rapoport # EM-X270 maintainer Cc: Robert Jarzmik # EZX maintainer Cc: Philipp Zabel # Magician maintainer Cc: Daniel Mack # Raumfeld maintainer Cc: Marc Zyngier # Zeus maintainer Cc: Geert Uytterhoeven # SuperH pinctrl/GPIO maintainer Cc: Russell King # SA1100 Signed-off-by: Linus Walleij Acked-by: Andy Shevchenko Acked-by: Tony Lindgren Signed-off-by: Mark Brown --- include/linux/regulator/fixed.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/regulator/fixed.h b/include/linux/regulator/fixed.h index 48918be649d4..1a4340ed8e2b 100644 --- a/include/linux/regulator/fixed.h +++ b/include/linux/regulator/fixed.h @@ -24,8 +24,6 @@ struct regulator_init_data; * @supply_name: Name of the regulator supply * @input_supply: Name of the input regulator supply * @microvolts: Output voltage of regulator - * @gpio: GPIO to use for enable control - * set to -EINVAL if not used * @startup_delay: Start-up time in microseconds * @gpio_is_open_drain: Gpio pin is open drain or normal type. * If it is open drain type then HIGH will be set @@ -49,7 +47,6 @@ struct fixed_voltage_config { const char *supply_name; const char *input_supply; int microvolts; - int gpio; unsigned startup_delay; unsigned gpio_is_open_drain:1; unsigned enable_high:1; -- cgit v1.2.3 From 37bed97f00734ce329495823d9682181028b51e4 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 14 May 2018 10:06:23 +0200 Subject: regulator: gpio: Get enable GPIO using GPIO descriptor We augment the GPIO regulator to get the *enable* regulator GPIO line (not the other lines) using a descriptor rather than a global number. We then pass this into the regulator core which has been prepared to hande enable descriptors in a separate patch. Switch over the two boardfiles using this facility and clean up so we only pass descriptors around. Cc: Philipp Zabel # HX4700/Magician maintainer Signed-off-by: Linus Walleij Signed-off-by: Mark Brown --- include/linux/regulator/gpio-regulator.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/regulator/gpio-regulator.h b/include/linux/regulator/gpio-regulator.h index 19fbd267406d..536cab86f2d5 100644 --- a/include/linux/regulator/gpio-regulator.h +++ b/include/linux/regulator/gpio-regulator.h @@ -44,8 +44,6 @@ struct gpio_regulator_state { /** * struct gpio_regulator_config - config structure * @supply_name: Name of the regulator supply - * @enable_gpio: GPIO to use for enable control - * set to -EINVAL if not used * @enable_high: Polarity of enable GPIO * 1 = Active high, 0 = Active low * @enabled_at_boot: Whether regulator has been enabled at @@ -69,7 +67,6 @@ struct gpio_regulator_state { struct gpio_regulator_config { const char *supply_name; - int enable_gpio; unsigned enable_high:1; unsigned enabled_at_boot:1; unsigned startup_delay; -- cgit v1.2.3 From 7e3c03817feccdf2b26722993825dc09377908b4 Mon Sep 17 00:00:00 2001 From: Lina Iyer Date: Mon, 7 May 2018 11:52:29 -0600 Subject: drivers: thermal: Update license to SPDX format Update licences format for core thermal files. Signed-off-by: Lina Iyer Acked-by: Daniel Lezcano Signed-off-by: Zhang Rui --- include/linux/thermal.h | 17 +---------------- 1 file changed, 1 insertion(+), 16 deletions(-) (limited to 'include/linux') diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 7834be668d80..5f4705f46c2f 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -1,25 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * thermal.h ($Revision: 0 $) * * Copyright (C) 2008 Intel Corp * Copyright (C) 2008 Zhang Rui * Copyright (C) 2008 Sujith Thomas - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */ #ifndef __THERMAL_H__ -- cgit v1.2.3 From ab4d11e2c2329cf7cb7be31ff22489aae4dee5dc Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 30 May 2018 15:15:20 +0100 Subject: regulator: wm8994: Fix shared GPIOs This reverts commit 3c6b38d45fa51c7c51 "regulator: wm8994: Pass descriptor instead of GPIO number" as it has problems with shared GPIOs similar to that on s2mps11. Reported-by: Marek Szyprowski Signed-off-by: Mark Brown --- include/linux/mfd/wm8994/pdata.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h index fca67bd194e2..90c60524a496 100644 --- a/include/linux/mfd/wm8994/pdata.h +++ b/include/linux/mfd/wm8994/pdata.h @@ -20,6 +20,9 @@ #define WM8994_NUM_AIF 3 struct wm8994_ldo_pdata { + /** GPIOs to enable regulator, 0 or less if not available */ + int enable; + const struct regulator_init_data *init_data; }; -- cgit v1.2.3 From 76c9dd9dbd6459f1faf2b10351eb3d3f90255fa1 Mon Sep 17 00:00:00 2001 From: David Lechner Date: Fri, 25 May 2018 13:11:47 -0500 Subject: clk: davinci: pll: allow dev == NULL This modifies the TI Davinci PLL clock driver to allow for the case when dev == NULL. On some (most) SoCs that use this driver, the PLL clock needs to be registered during early boot because it is used for clocksource/clkevent and there will be no platform device available. Signed-off-by: David Lechner Reviewed-by: Sekhar Nori Signed-off-by: Michael Turquette Link: lkml.kernel.org/r/20180525181150.17873-7-david@lechnology.com --- include/linux/clk/davinci.h | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 include/linux/clk/davinci.h (limited to 'include/linux') diff --git a/include/linux/clk/davinci.h b/include/linux/clk/davinci.h new file mode 100644 index 000000000000..ebdd9df1c0ef --- /dev/null +++ b/include/linux/clk/davinci.h @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Clock drivers for TI DaVinci PLL and PSC controllers + * + * Copyright (C) 2018 David Lechner + */ + +#ifndef __LINUX_CLK_DAVINCI_PLL_H___ +#define __LINUX_CLK_DAVINCI_PLL_H___ + +#include +#include + +/* function for registering clocks in early boot */ + +int da830_pll_init(struct device *dev, void __iomem *base, struct regmap *cfgchip); +int da850_pll0_init(struct device *dev, void __iomem *base, struct regmap *cfgchip); +int dm355_pll1_init(struct device *dev, void __iomem *base, struct regmap *cfgchip); +int dm365_pll1_init(struct device *dev, void __iomem *base, struct regmap *cfgchip); +int dm365_pll2_init(struct device *dev, void __iomem *base, struct regmap *cfgchip); +int dm644x_pll1_init(struct device *dev, void __iomem *base, struct regmap *cfgchip); +int dm646x_pll1_init(struct device *dev, void __iomem *base, struct regmap *cfgchip); + +#endif /* __LINUX_CLK_DAVINCI_PLL_H___ */ -- cgit v1.2.3 From 043eaa70ad736380a631e820e32ad9176b020887 Mon Sep 17 00:00:00 2001 From: David Lechner Date: Fri, 25 May 2018 13:11:49 -0500 Subject: clk: davinci: psc: allow for dev == NULL On some davinci SoCs, we need to register the PSC clocks during early boot because they are needed for clocksource/clockevent. These changes allow for dev == NULL because in this case, we won't have a platform device for the clocks. Signed-off-by: David Lechner Reviewed-by: Sekhar Nori Signed-off-by: Michael Turquette Link: lkml.kernel.org/r/20180525181150.17873-9-david@lechnology.com --- include/linux/clk/davinci.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/clk/davinci.h b/include/linux/clk/davinci.h index ebdd9df1c0ef..62764c5cc86e 100644 --- a/include/linux/clk/davinci.h +++ b/include/linux/clk/davinci.h @@ -21,4 +21,9 @@ int dm365_pll2_init(struct device *dev, void __iomem *base, struct regmap *cfgch int dm644x_pll1_init(struct device *dev, void __iomem *base, struct regmap *cfgchip); int dm646x_pll1_init(struct device *dev, void __iomem *base, struct regmap *cfgchip); +int dm355_psc_init(struct device *dev, void __iomem *base); +int dm365_psc_init(struct device *dev, void __iomem *base); +int dm644x_psc_init(struct device *dev, void __iomem *base); +int dm646x_psc_init(struct device *dev, void __iomem *base); + #endif /* __LINUX_CLK_DAVINCI_PLL_H___ */ -- cgit v1.2.3 From 4eff0bebf4ed5ed6d1a4dffe7dfd420b270c229a Mon Sep 17 00:00:00 2001 From: David Lechner Date: Fri, 25 May 2018 13:11:50 -0500 Subject: clk: davinci: Fix link errors when not all SoCs are enabled This fixes linker errors due to undefined symbols when one or more of the TI DaVinci SoCs is not enabled in the kernel config. Signed-off-by: David Lechner Signed-off-by: Michael Turquette Link: lkml.kernel.org/r/20180525181150.17873-10-david@lechnology.com --- include/linux/clk/davinci.h | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/clk/davinci.h b/include/linux/clk/davinci.h index 62764c5cc86e..8a7b5cd7eac0 100644 --- a/include/linux/clk/davinci.h +++ b/include/linux/clk/davinci.h @@ -13,17 +13,28 @@ /* function for registering clocks in early boot */ +#ifdef CONFIG_ARCH_DAVINCI_DA830 int da830_pll_init(struct device *dev, void __iomem *base, struct regmap *cfgchip); +#endif +#ifdef CONFIG_ARCH_DAVINCI_DA850 int da850_pll0_init(struct device *dev, void __iomem *base, struct regmap *cfgchip); +#endif +#ifdef CONFIG_ARCH_DAVINCI_DM355 int dm355_pll1_init(struct device *dev, void __iomem *base, struct regmap *cfgchip); +int dm355_psc_init(struct device *dev, void __iomem *base); +#endif +#ifdef CONFIG_ARCH_DAVINCI_DM365 int dm365_pll1_init(struct device *dev, void __iomem *base, struct regmap *cfgchip); int dm365_pll2_init(struct device *dev, void __iomem *base, struct regmap *cfgchip); -int dm644x_pll1_init(struct device *dev, void __iomem *base, struct regmap *cfgchip); -int dm646x_pll1_init(struct device *dev, void __iomem *base, struct regmap *cfgchip); - -int dm355_psc_init(struct device *dev, void __iomem *base); int dm365_psc_init(struct device *dev, void __iomem *base); +#endif +#ifdef CONFIG_ARCH_DAVINCI_DM644x +int dm644x_pll1_init(struct device *dev, void __iomem *base, struct regmap *cfgchip); int dm644x_psc_init(struct device *dev, void __iomem *base); +#endif +#ifdef CONFIG_ARCH_DAVINCI_DM646x +int dm646x_pll1_init(struct device *dev, void __iomem *base, struct regmap *cfgchip); int dm646x_psc_init(struct device *dev, void __iomem *base); +#endif #endif /* __LINUX_CLK_DAVINCI_PLL_H___ */ -- cgit v1.2.3 From eff0e9e1078ea7dc1d794dc50e31baef984c46d7 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Tue, 29 May 2018 13:11:05 +0100 Subject: arm/arm64: smccc: Add SMCCC-specific return codes We've so far used the PSCI return codes for SMCCC because they were extremely similar. But with the new ARM DEN 0070A specification, "NOT_REQUIRED" (-2) is clashing with PSCI's "PSCI_RET_INVALID_PARAMS". Let's bite the bullet and add SMCCC specific return codes. Users can be repainted as and when required. Acked-by: Will Deacon Reviewed-by: Mark Rutland Signed-off-by: Marc Zyngier Signed-off-by: Catalin Marinas --- include/linux/arm-smccc.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/arm-smccc.h b/include/linux/arm-smccc.h index a031897fca76..c89da86de99f 100644 --- a/include/linux/arm-smccc.h +++ b/include/linux/arm-smccc.h @@ -291,5 +291,10 @@ asmlinkage void __arm_smccc_hvc(unsigned long a0, unsigned long a1, */ #define arm_smccc_1_1_hvc(...) __arm_smccc_1_1(SMCCC_HVC_INST, __VA_ARGS__) +/* Return codes defined in ARM DEN 0070A */ +#define SMCCC_RET_SUCCESS 0 +#define SMCCC_RET_NOT_SUPPORTED -1 +#define SMCCC_RET_NOT_REQUIRED -2 + #endif /*__ASSEMBLY__*/ #endif /*__LINUX_ARM_SMCCC_H*/ -- cgit v1.2.3 From 8e2906245f1e3b0d027169d9f2e55ce0548cb96e Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Tue, 29 May 2018 13:11:06 +0100 Subject: arm64: Call ARCH_WORKAROUND_2 on transitions between EL0 and EL1 In order for the kernel to protect itself, let's call the SSBD mitigation implemented by the higher exception level (either hypervisor or firmware) on each transition between userspace and kernel. We must take the PSCI conduit into account in order to target the right exception level, hence the introduction of a runtime patching callback. Reviewed-by: Mark Rutland Reviewed-by: Julien Grall Acked-by: Will Deacon Signed-off-by: Marc Zyngier Signed-off-by: Catalin Marinas --- include/linux/arm-smccc.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/arm-smccc.h b/include/linux/arm-smccc.h index c89da86de99f..ca1d2cc2cdfa 100644 --- a/include/linux/arm-smccc.h +++ b/include/linux/arm-smccc.h @@ -80,6 +80,11 @@ ARM_SMCCC_SMC_32, \ 0, 0x8000) +#define ARM_SMCCC_ARCH_WORKAROUND_2 \ + ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, \ + ARM_SMCCC_SMC_32, \ + 0, 0x7fff) + #ifndef __ASSEMBLY__ #include -- cgit v1.2.3 From ead9ad7253f4296ba8cd3eb930f06a74924700a9 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Mon, 30 Apr 2018 14:31:30 +1000 Subject: rculist: add list_for_each_entry_from_rcu() list_for_each_entry_from_rcu() is an RCU version of list_for_each_entry_from(). It walks a linked list under rcu protection, from a given start point. It is similar to list_for_each_entry_continue_rcu() but starts *at* the given position rather than *after* it. Naturally, the start point must be known to be in the list. Signed-off-by: NeilBrown Signed-off-by: Trond Myklebust --- include/linux/rculist.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'include/linux') diff --git a/include/linux/rculist.h b/include/linux/rculist.h index 127f534fec94..36df6ccbc874 100644 --- a/include/linux/rculist.h +++ b/include/linux/rculist.h @@ -403,6 +403,19 @@ static inline void list_splice_tail_init_rcu(struct list_head *list, &pos->member != (head); \ pos = list_entry_rcu(pos->member.next, typeof(*pos), member)) +/** + * list_for_each_entry_from_rcu - iterate over a list from current point + * @pos: the type * to use as a loop cursor. + * @head: the head for your list. + * @member: the name of the list_node within the struct. + * + * Iterate over the tail of a list starting from a given position, + * which must have been in the list when the RCU read lock was taken. + */ +#define list_for_each_entry_from_rcu(pos, head, member) \ + for (; &(pos)->member != (head); \ + pos = list_entry_rcu(pos->member.next, typeof(*(pos)), member)) + /** * hlist_del_rcu - deletes entry from hash list without re-initialization * @n: the element to delete from the hash list. -- cgit v1.2.3 From fb91fb0ee7b266ed0344515c048f57ac65cdb4b4 Mon Sep 17 00:00:00 2001 From: Anna Schumaker Date: Fri, 4 May 2018 16:22:48 -0400 Subject: NFS: Move call to nfs4_state_protect_write() to nfs4_write_setup() This doesn't really need to be in the generic NFS client code, and I think it makes more sense to keep the v4 code in one place. Signed-off-by: Anna Schumaker Signed-off-by: Trond Myklebust --- include/linux/nfs_xdr.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index 34d28564ecf3..1009269e1a49 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -1620,7 +1620,8 @@ struct nfs_rpc_ops { struct nfs_pgio_header *); void (*read_setup)(struct nfs_pgio_header *, struct rpc_message *); int (*read_done)(struct rpc_task *, struct nfs_pgio_header *); - void (*write_setup)(struct nfs_pgio_header *, struct rpc_message *); + void (*write_setup)(struct nfs_pgio_header *, struct rpc_message *, + struct rpc_clnt **); int (*write_done)(struct rpc_task *, struct nfs_pgio_header *); void (*commit_setup) (struct nfs_commit_data *, struct rpc_message *); void (*commit_rpc_prepare)(struct rpc_task *, struct nfs_commit_data *); -- cgit v1.2.3 From e9ae1ee2b2ace7dcc37bc4e486b4410e7702ae57 Mon Sep 17 00:00:00 2001 From: Anna Schumaker Date: Fri, 4 May 2018 16:22:49 -0400 Subject: NFS: Move call to nfs4_state_protect() to nfs4_commit_setup() Rather than doing this in the generic NFS client code. Let's put this with the other v4 stuff so it's all in one place. Signed-off-by: Anna Schumaker Signed-off-by: Trond Myklebust --- include/linux/nfs_xdr.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index 1009269e1a49..52b481dfd61e 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -1623,7 +1623,8 @@ struct nfs_rpc_ops { void (*write_setup)(struct nfs_pgio_header *, struct rpc_message *, struct rpc_clnt **); int (*write_done)(struct rpc_task *, struct nfs_pgio_header *); - void (*commit_setup) (struct nfs_commit_data *, struct rpc_message *); + void (*commit_setup) (struct nfs_commit_data *, struct rpc_message *, + struct rpc_clnt **); void (*commit_rpc_prepare)(struct rpc_task *, struct nfs_commit_data *); int (*commit_done) (struct rpc_task *, struct nfs_commit_data *); int (*lock)(struct file *, int, struct file_lock *); -- cgit v1.2.3 From ed7e9ad0908a8c2a502f49ceed940d0ce122fe8b Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 30 May 2018 16:11:52 -0400 Subject: NFSv4: Fix sillyrename to return the delegation when appropriate Ensure that we pass down the inode of the file being deleted so that we can return any delegation being held. Signed-off-by: Trond Myklebust --- include/linux/nfs_xdr.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index 52b481dfd61e..d3cefe57c2a3 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -1591,7 +1591,7 @@ struct nfs_rpc_ops { int (*create) (struct inode *, struct dentry *, struct iattr *, int); int (*remove) (struct inode *, struct dentry *); - void (*unlink_setup) (struct rpc_message *, struct dentry *); + void (*unlink_setup) (struct rpc_message *, struct dentry *, struct inode *); void (*unlink_rpc_prepare) (struct rpc_task *, struct nfs_unlinkdata *); int (*unlink_done) (struct rpc_task *, struct inode *); void (*rename_setup) (struct rpc_message *msg, -- cgit v1.2.3 From 808ba32abe84b74abef5eb7507b8031f65b8221d Mon Sep 17 00:00:00 2001 From: Fred Isaman Date: Tue, 4 Oct 2016 15:02:21 -0400 Subject: pnfs: Store return value of decode_layoutget for later processing This will be needed to seperate return value of OPEN and LAYOUTGET when they are combined into a single RPC. Signed-off-by: Fred Isaman Signed-off-by: Trond Myklebust --- include/linux/nfs_xdr.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index d3cefe57c2a3..d3aa5eaf99a7 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -259,6 +259,7 @@ struct nfs4_layoutget_args { struct nfs4_layoutget_res { struct nfs4_sequence_res seq_res; + int status; __u32 return_on_close; struct pnfs_layout_range range; __u32 type; -- cgit v1.2.3 From 56f487f8c8fc5d6e582b79a86fc132d050129e15 Mon Sep 17 00:00:00 2001 From: Fred Isaman Date: Wed, 21 Sep 2016 11:43:41 -0400 Subject: pnfs: Add conditional encode/decode of LAYOUTGET within OPEN compound Signed-off-by: Fred Isaman Signed-off-by: Trond Myklebust --- include/linux/nfs_xdr.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index d3aa5eaf99a7..bc235e50415f 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -436,6 +436,7 @@ struct nfs_openargs { enum createmode4 createmode; const struct nfs4_label *label; umode_t umask; + struct nfs4_layoutget_args *lg_args; }; struct nfs_openres { @@ -458,6 +459,7 @@ struct nfs_openres { __u32 access_request; __u32 access_supported; __u32 access_result; + struct nfs4_layoutget_res *lg_res; }; /* -- cgit v1.2.3 From 6e01260ceeca299b82d466660935534c5c909d54 Mon Sep 17 00:00:00 2001 From: Fred Isaman Date: Tue, 4 Oct 2016 15:26:41 -0400 Subject: pnfs: Stop attempting LAYOUTGET on OPEN on failure Signed-off-by: Fred Isaman Signed-off-by: Trond Myklebust --- include/linux/nfs_fs_sb.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/nfs_fs_sb.h b/include/linux/nfs_fs_sb.h index 4e735be53e70..2c18d618604e 100644 --- a/include/linux/nfs_fs_sb.h +++ b/include/linux/nfs_fs_sb.h @@ -235,6 +235,7 @@ struct nfs_server { #define NFS_CAP_ACLS (1U << 3) #define NFS_CAP_ATOMIC_OPEN (1U << 4) /* #define NFS_CAP_CHANGE_ATTR (1U << 5) */ +#define NFS_CAP_LGOPEN (1U << 5) #define NFS_CAP_FILEID (1U << 6) #define NFS_CAP_MODE (1U << 7) #define NFS_CAP_NLINK (1U << 8) -- cgit v1.2.3 From c49b5209f99abe082d3d4cd94f0ad924baea34ed Mon Sep 17 00:00:00 2001 From: Fred Isaman Date: Wed, 5 Oct 2016 09:37:12 -0400 Subject: pnfs: Add barrier to prevent lgopen using LAYOUTGET during recall Since the LAYOUTGET on OPEN can be sent without prior inode information, existing methods to prevent LAYOUTGET from being sent while processing CB_LAYOUTRECALL don't work. Track if a recall occurred while LAYOUTGET was being sent, and if so ignore the results. Signed-off-by: Fred Isaman Signed-off-by: Trond Myklebust --- include/linux/nfs_fs_sb.h | 1 + include/linux/nfs_xdr.h | 1 + 2 files changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nfs_fs_sb.h b/include/linux/nfs_fs_sb.h index 2c18d618604e..74ae3e1d19a0 100644 --- a/include/linux/nfs_fs_sb.h +++ b/include/linux/nfs_fs_sb.h @@ -28,6 +28,7 @@ struct nfs41_impl_id; struct nfs_client { refcount_t cl_count; atomic_t cl_mds_count; + seqcount_t cl_callback_count; int cl_cons_state; /* current construction state (-ve: init error) */ #define NFS_CS_READY 0 /* ready to be used */ #define NFS_CS_INITING 1 /* busy initialising */ diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index bc235e50415f..09dc14ac5804 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -271,6 +271,7 @@ struct nfs4_layoutget { struct nfs4_layoutget_args args; struct nfs4_layoutget_res res; struct rpc_cred *cred; + unsigned callback_count; gfp_t gfp_flags; }; -- cgit v1.2.3 From f567c71f4f91d173795a2f46d6fc493387ce084d Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Tue, 15 May 2018 17:08:21 +0200 Subject: mtd: nand: Pass mode information to nand_page_io_req The NAND sub-layers are likely to need the MTD_OPS_XXX mode information in order to decide if they should enable/disable ECC or how they should place the OOB bytes in the provided OOB buffer. Add a field to nand_page_io_req to pass this information. Signed-off-by: Boris Brezillon Reviewed-by: Miquel Raynal Tested-by: Frieder Schrempf Reviewed-by: Frieder Schrempf --- include/linux/mtd/nand.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 792ea5c26329..abe975c87b90 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -86,6 +86,7 @@ struct nand_pos { * @ooboffs: the OOB offset within the page * @ooblen: the number of OOB bytes to read from/write to this page * @oobbuf: buffer to store OOB data in or get OOB data from + * @mode: one of the %MTD_OPS_XXX mode * * This object is used to pass per-page I/O requests to NAND sub-layers. This * way all useful information are already formatted in a useful way and @@ -106,6 +107,7 @@ struct nand_page_io_req { const void *out; void *in; } oobbuf; + int mode; }; /** @@ -599,6 +601,7 @@ static inline void nanddev_io_iter_init(struct nand_device *nand, { struct mtd_info *mtd = nanddev_to_mtd(nand); + iter->req.mode = req->mode; iter->req.dataoffs = nanddev_offs_to_pos(nand, offs, &iter->req.pos); iter->req.ooboffs = req->ooboffs; iter->oobbytes_per_page = mtd_oobavail(mtd, req); -- cgit v1.2.3 From 1499fa809e9e6713952ef84a7e9d51606881681f Mon Sep 17 00:00:00 2001 From: Souptick Joarder Date: Thu, 19 Apr 2018 00:49:58 +0530 Subject: kvm: Change return type to vm_fault_t Use new return type vm_fault_t for fault handler. For now, this is just documenting that the function returns a VM_FAULT value rather than an errno. Once all instances are converted, vm_fault_t will become a distinct type. commit 1c8f422059ae ("mm: change return type to vm_fault_t") Signed-off-by: Souptick Joarder Reviewed-by: Matthew Wilcox Signed-off-by: Paolo Bonzini --- include/linux/kvm_host.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index b81769a5a2b7..bca28637bcd4 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -739,7 +739,7 @@ long kvm_arch_dev_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg); long kvm_arch_vcpu_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg); -int kvm_arch_vcpu_fault(struct kvm_vcpu *vcpu, struct vm_fault *vmf); +vm_fault_t kvm_arch_vcpu_fault(struct kvm_vcpu *vcpu, struct vm_fault *vmf); int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext); -- cgit v1.2.3 From d1e5b0e98ea27b4f17871dc4e8ea4b0447e35221 Mon Sep 17 00:00:00 2001 From: Marc Orr Date: Tue, 15 May 2018 04:37:37 -0700 Subject: kvm: Make VM ioctl do valloc for some archs The kvm struct has been bloating. For example, it's tens of kilo-bytes for x86, which turns out to be a large amount of memory to allocate contiguously via kzalloc. Thus, this patch does the following: 1. Uses architecture-specific routines to allocate the kvm struct via vzalloc for x86. 2. Switches arm to __KVM_HAVE_ARCH_VM_ALLOC so that it can use vzalloc when has_vhe() is true. Other architectures continue to default to kalloc, as they have a dependency on kalloc or have a small-enough struct kvm. Signed-off-by: Marc Orr Reviewed-by: Marc Zyngier Signed-off-by: Paolo Bonzini --- include/linux/kvm_host.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index bca28637bcd4..4ee7bc548a83 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include @@ -811,6 +812,10 @@ bool kvm_arch_vcpu_in_kernel(struct kvm_vcpu *vcpu); int kvm_arch_vcpu_should_kick(struct kvm_vcpu *vcpu); #ifndef __KVM_HAVE_ARCH_VM_ALLOC +/* + * All architectures that want to use vzalloc currently also + * need their own kvm_arch_alloc_vm implementation. + */ static inline struct kvm *kvm_arch_alloc_vm(void) { return kzalloc(sizeof(struct kvm), GFP_KERNEL); -- cgit v1.2.3 From c1c2873df06372a108976599583eba7e47483379 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 29 May 2018 18:08:04 +0200 Subject: clk: remove clk_debugfs_add_file() No one was using this api call, so remove it. If it is ever needed in the future, a "raw" debugfs call can be used. Cc: Michael Turquette Cc: Stephen Boyd Signed-off-by: Greg Kroah-Hartman Signed-off-by: Stephen Boyd --- include/linux/clk-provider.h | 5 ----- 1 file changed, 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 210a890008f9..00e55d4d07f1 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -996,10 +996,5 @@ static inline void clk_writel(u32 val, u32 __iomem *reg) #endif /* platform dependent I/O accessors */ -#ifdef CONFIG_DEBUG_FS -struct dentry *clk_debugfs_add_file(struct clk_hw *hw, char *name, umode_t mode, - void *data, const struct file_operations *fops); -#endif - #endif /* CONFIG_COMMON_CLK */ #endif /* CLK_PROVIDER_H */ -- cgit v1.2.3 From d75d50c016a4eff96e004921402128dc2bc3d65b Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Fri, 1 Jun 2018 21:42:07 -0700 Subject: clk: Return void from debug_init op We only have two users of the debug_init hook, and we recently stopped caring about the return value from that op. Finish that off by changing the clk_op to return void instead of int because it doesn't matter if debugfs fails or not. Cc: Eric Anholt Cc: David Lechner Cc: Sekhar Nori Cc: Greg Kroah-Hartman Signed-off-by: Stephen Boyd --- include/linux/clk-provider.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 00e55d4d07f1..a4dc15afbdaf 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -218,7 +218,7 @@ struct clk_ops { int (*get_phase)(struct clk_hw *hw); int (*set_phase)(struct clk_hw *hw, int degrees); void (*init)(struct clk_hw *hw); - int (*debug_init)(struct clk_hw *hw, struct dentry *dentry); + void (*debug_init)(struct clk_hw *hw, struct dentry *dentry); }; /** -- cgit v1.2.3 From 3e79bfd61cbba28ffa54ff15475495f18bcf3c7f Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Thu, 31 May 2018 12:10:59 -0500 Subject: rpmsg: Switch to SPDX license identifier Use the appropriate SPDX license identifier in the rpmsg core source files and drop the previous boilerplate license text. Signed-off-by: Suman Anna Signed-off-by: Bjorn Andersson --- include/linux/rpmsg.h | 27 +-------------------------- 1 file changed, 1 insertion(+), 26 deletions(-) (limited to 'include/linux') diff --git a/include/linux/rpmsg.h b/include/linux/rpmsg.h index ca07366c4c33..9fe156d1c018 100644 --- a/include/linux/rpmsg.h +++ b/include/linux/rpmsg.h @@ -1,35 +1,10 @@ +/* SPDX-License-Identifier: BSD-3-Clause */ /* * Remote processor messaging * * Copyright (C) 2011 Texas Instruments, Inc. * Copyright (C) 2011 Google, Inc. * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Texas Instruments nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef _LINUX_RPMSG_H -- cgit v1.2.3 From 84369fbe62a286711de27a0949f808726f810392 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Thu, 31 May 2018 12:11:02 -0500 Subject: rpmsg: glink: Switch to SPDX license identifier Use the appropriate SPDX license identifier in various rpmsg glink driver source files and drop the previous boilerplate license text. Signed-off-by: Suman Anna Signed-off-by: Bjorn Andersson --- include/linux/rpmsg/qcom_glink.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/rpmsg/qcom_glink.h b/include/linux/rpmsg/qcom_glink.h index a622f029836e..96e26d94719f 100644 --- a/include/linux/rpmsg/qcom_glink.h +++ b/include/linux/rpmsg/qcom_glink.h @@ -1,3 +1,5 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + #ifndef _LINUX_RPMSG_QCOM_GLINK_H #define _LINUX_RPMSG_QCOM_GLINK_H -- cgit v1.2.3 From d95c9760d9c8e046b09b54a3bb6dd0c9aa7a0eff Mon Sep 17 00:00:00 2001 From: Fabrice Gasnier Date: Fri, 18 May 2018 17:24:03 +0200 Subject: mfd: stm32-timers: Fix pwm-stm32 linker issue with COMPILE_TEST This is seen when COMPILE_TEST=y and MFD_STM32_TIMERS=n. drivers/pwm/pwm-stm32.o: In function 'stm32_pwm_raw_capture': pwm-stm32.c:... undefined reference to 'stm32_timers_dma_burst_read' Fixes: 0c6609805b63 ("mfd: stm32-timers: Add support for DMAs") Signed-off-by: Fabrice Gasnier Reported-by: Randy Dunlap Tested-by: Randy Dunlap Signed-off-by: Lee Jones --- include/linux/mfd/stm32-timers.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/stm32-timers.h b/include/linux/mfd/stm32-timers.h index 9da1d7ece079..067d14655c28 100644 --- a/include/linux/mfd/stm32-timers.h +++ b/include/linux/mfd/stm32-timers.h @@ -124,8 +124,20 @@ struct stm32_timers { struct stm32_timers_dma dma; /* Only to be used by the parent */ }; +#if IS_REACHABLE(CONFIG_MFD_STM32_TIMERS) int stm32_timers_dma_burst_read(struct device *dev, u32 *buf, enum stm32_timers_dmas id, u32 reg, unsigned int num_reg, unsigned int bursts, unsigned long tmo_ms); +#else +static inline int stm32_timers_dma_burst_read(struct device *dev, u32 *buf, + enum stm32_timers_dmas id, + u32 reg, + unsigned int num_reg, + unsigned int bursts, + unsigned long tmo_ms) +{ + return -ENODEV; +} +#endif #endif -- cgit v1.2.3 From a841b54dbd65421726caf7129f8951910c7a8ea6 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Sat, 7 Apr 2018 13:50:59 -0400 Subject: NFS: Pass the inode down to the getattr() callback Allow the getattr() callback to check things like whether or not we hold a delegation so that it can adjust the attributes that it is asking for. Signed-off-by: Trond Myklebust --- include/linux/nfs_xdr.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index 09dc14ac5804..9dee3c23895d 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -1581,7 +1581,8 @@ struct nfs_rpc_ops { struct dentry *(*try_mount) (int, const char *, struct nfs_mount_info *, struct nfs_subversion *); int (*getattr) (struct nfs_server *, struct nfs_fh *, - struct nfs_fattr *, struct nfs4_label *); + struct nfs_fattr *, struct nfs4_label *, + struct inode *); int (*setattr) (struct dentry *, struct nfs_fattr *, struct iattr *); int (*lookup) (struct inode *, const struct qstr *, -- cgit v1.2.3 From fe943d50425b6646606f8ef1ef8b8d4975fdbee2 Mon Sep 17 00:00:00 2001 From: Chengguang Xu Date: Thu, 12 Apr 2018 12:04:55 +0800 Subject: libceph, rbd: add error handling for osd_req_op_cls_init() Add proper error handling for osd_req_op_cls_init() to replace BUG_ON statement when failing from memory allocation. Signed-off-by: Chengguang Xu Reviewed-by: Ilya Dryomov Signed-off-by: Ilya Dryomov --- include/linux/ceph/osd_client.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ceph/osd_client.h b/include/linux/ceph/osd_client.h index 96bb32285989..b73dd7ebe585 100644 --- a/include/linux/ceph/osd_client.h +++ b/include/linux/ceph/osd_client.h @@ -440,7 +440,7 @@ extern void osd_req_op_cls_response_data_pages(struct ceph_osd_request *, struct page **pages, u64 length, u32 alignment, bool pages_from_pool, bool own_pages); -extern void osd_req_op_cls_init(struct ceph_osd_request *osd_req, +extern int osd_req_op_cls_init(struct ceph_osd_request *osd_req, unsigned int which, u16 opcode, const char *class, const char *method); extern int osd_req_op_xattr_init(struct ceph_osd_request *osd_req, unsigned int which, -- cgit v1.2.3 From 49a9f4f6714ec0ca2c6ada2ce764fbdd694962ee Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Wed, 25 Apr 2018 17:30:23 +0800 Subject: ceph: always get rstat from auth mds rstat is not tracked by capability. client can't know if rstat from non-auth mds is uptodate or not. Link: http://tracker.ceph.com/issues/23538 Signed-off-by: "Yan, Zheng" Signed-off-by: Ilya Dryomov --- include/linux/ceph/ceph_fs.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/ceph/ceph_fs.h b/include/linux/ceph/ceph_fs.h index 7ecfc88314d8..4903deb0777a 100644 --- a/include/linux/ceph/ceph_fs.h +++ b/include/linux/ceph/ceph_fs.h @@ -628,6 +628,7 @@ int ceph_flags_to_mode(int flags); CEPH_CAP_XATTR_SHARED) #define CEPH_STAT_CAP_INLINE_DATA (CEPH_CAP_FILE_SHARED | \ CEPH_CAP_FILE_RD) +#define CEPH_STAT_RSTAT CEPH_CAP_FILE_WREXTEND #define CEPH_CAP_ANY_SHARED (CEPH_CAP_AUTH_SHARED | \ CEPH_CAP_LINK_SHARED | \ -- cgit v1.2.3 From 66850df58529eefc61cb96b895991508547503bf Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Tue, 15 May 2018 15:47:58 +0200 Subject: libceph: introduce ceph_osdc_abort_requests() This will be used by the filesystem for "umount -f". Signed-off-by: Ilya Dryomov --- include/linux/ceph/osd_client.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ceph/osd_client.h b/include/linux/ceph/osd_client.h index b73dd7ebe585..874c31c01f80 100644 --- a/include/linux/ceph/osd_client.h +++ b/include/linux/ceph/osd_client.h @@ -347,6 +347,7 @@ struct ceph_osd_client { struct rb_root linger_map_checks; atomic_t num_requests; atomic_t num_homeless; + int abort_err; struct delayed_work timeout_work; struct delayed_work osds_timeout_work; #ifdef CONFIG_DEBUG_FS @@ -378,6 +379,7 @@ extern void ceph_osdc_handle_reply(struct ceph_osd_client *osdc, extern void ceph_osdc_handle_map(struct ceph_osd_client *osdc, struct ceph_msg *msg); void ceph_osdc_update_epoch_barrier(struct ceph_osd_client *osdc, u32 eb); +void ceph_osdc_abort_requests(struct ceph_osd_client *osdc, int err); extern void osd_req_op_init(struct ceph_osd_request *osd_req, unsigned int which, u16 opcode, u32 flags); -- cgit v1.2.3 From 88bc1922c273c95e84a8955e657401f9bc63a80b Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Mon, 21 May 2018 16:00:29 +0200 Subject: libceph: defer __complete_request() to a workqueue In the common case, req->r_callback is called by handle_reply() on the ceph-msgr worker thread without any locks. If handle_reply() fails, it is called with both osd->lock and osdc->lock. In the map check case, it is called with just osdc->lock but held for write. Finally, if the request is aborted because of -ENOSPC or by ceph_osdc_abort_requests(), it is called directly on the submitter's thread, again with both locks. req->r_callback on the submitter's thread is relatively new (introduced in 4.12) and ripe for deadlocks -- e.g. writeback worker thread waiting on itself: inode_wait_for_writeback+0x26/0x40 evict+0xb5/0x1a0 iput+0x1d2/0x220 ceph_put_wrbuffer_cap_refs+0xe0/0x2c0 [ceph] writepages_finish+0x2d3/0x410 [ceph] __complete_request+0x26/0x60 [libceph] complete_request+0x2e/0x70 [libceph] __submit_request+0x256/0x330 [libceph] submit_request+0x2b/0x30 [libceph] ceph_osdc_start_request+0x25/0x40 [libceph] ceph_writepages_start+0xdfe/0x1320 [ceph] do_writepages+0x1f/0x70 __writeback_single_inode+0x45/0x330 writeback_sb_inodes+0x26a/0x600 __writeback_inodes_wb+0x92/0xc0 wb_writeback+0x274/0x330 wb_workfn+0x2d5/0x3b0 Defer __complete_request() to a workqueue in all failure cases so it's never on the same thread as ceph_osdc_start_request() and always called with no locks held. Link: http://tracker.ceph.com/issues/23978 Signed-off-by: Ilya Dryomov Acked-by: Jeff Layton Reviewed-by: "Yan, Zheng" --- include/linux/ceph/osd_client.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ceph/osd_client.h b/include/linux/ceph/osd_client.h index 874c31c01f80..d4191bde95a4 100644 --- a/include/linux/ceph/osd_client.h +++ b/include/linux/ceph/osd_client.h @@ -170,6 +170,7 @@ struct ceph_osd_request { u64 r_tid; /* unique for this client */ struct rb_node r_node; struct rb_node r_mc_node; /* map check */ + struct work_struct r_complete_work; struct ceph_osd *r_osd; struct ceph_osd_request_target r_t; @@ -360,6 +361,7 @@ struct ceph_osd_client { struct ceph_msgpool msgpool_op_reply; struct workqueue_struct *notify_wq; + struct workqueue_struct *completion_wq; }; static inline bool ceph_osdmap_flag(struct ceph_osd_client *osdc, int flag) -- cgit v1.2.3 From c843d13caefad9f2f182f38d6bfe492c9f00e086 Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Wed, 30 May 2018 16:29:14 +0200 Subject: libceph: make abort_on_full a per-osdc setting The intent behind making it a per-request setting was that it would be set for writes, but not for reads. As it is, the flag is set for all fs/ceph requests except for pool perm check stat request (technically a read). ceph_osdc_abort_on_full() skips reads since the previous commit and I don't see a use case for marking individual requests. Signed-off-by: Ilya Dryomov Acked-by: Jeff Layton Reviewed-by: "Yan, Zheng" --- include/linux/ceph/osd_client.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ceph/osd_client.h b/include/linux/ceph/osd_client.h index d4191bde95a4..0d6ee04b4c41 100644 --- a/include/linux/ceph/osd_client.h +++ b/include/linux/ceph/osd_client.h @@ -202,7 +202,6 @@ struct ceph_osd_request { struct timespec r_mtime; /* ditto */ u64 r_data_offset; /* ditto */ bool r_linger; /* don't resend on failure */ - bool r_abort_on_full; /* return ENOSPC when full */ /* internal */ unsigned long r_stamp; /* jiffies, send or check time */ @@ -348,6 +347,7 @@ struct ceph_osd_client { struct rb_root linger_map_checks; atomic_t num_requests; atomic_t num_homeless; + bool abort_on_full; /* abort w/ ENOSPC when full */ int abort_err; struct delayed_work timeout_work; struct delayed_work osds_timeout_work; -- cgit v1.2.3 From a86f009f106cba322c608785e09c8b5be8ffe8bb Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Wed, 23 May 2018 14:46:53 +0200 Subject: libceph: allocate the locator string with GFP_NOFAIL calc_target() isn't supposed to fail with anything but POOL_DNE, in which case we report that the pool doesn't exist and fail the request with -ENOENT. Doing this for -ENOMEM is at the very least confusing and also harmful -- as the preceding requests complete, a short-lived locator string allocation is likely to succeed after a wait. (We used to call ceph_object_locator_to_pg() for a pi lookup. In theory that could fail with -ENOENT, hence the "ret != -ENOENT" warning being removed.) Signed-off-by: Ilya Dryomov --- include/linux/ceph/osdmap.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ceph/osdmap.h b/include/linux/ceph/osdmap.h index e71fb222c7c3..5675b1f09bc5 100644 --- a/include/linux/ceph/osdmap.h +++ b/include/linux/ceph/osdmap.h @@ -279,10 +279,10 @@ bool ceph_osds_changed(const struct ceph_osds *old_acting, const struct ceph_osds *new_acting, bool any_change); -int __ceph_object_locator_to_pg(struct ceph_pg_pool_info *pi, - const struct ceph_object_id *oid, - const struct ceph_object_locator *oloc, - struct ceph_pg *raw_pgid); +void __ceph_object_locator_to_pg(struct ceph_pg_pool_info *pi, + const struct ceph_object_id *oid, + const struct ceph_object_locator *oloc, + struct ceph_pg *raw_pgid); int ceph_object_locator_to_pg(struct ceph_osdmap *osdmap, const struct ceph_object_id *oid, const struct ceph_object_locator *oloc, -- cgit v1.2.3 From 2520e627dbeecf7ccccc50c969504b59e1a3294b Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Tue, 5 Jun 2018 15:35:03 +0100 Subject: ACPI / PPTT: fix build when CONFIG_ACPI_PPTT is not enabled Though CONFIG_ACPI_PPTT is selected by platforms and nor user visible, it may be useful to support the build with CONFIG_ACPI_PPTT disabled. This patch adds the missing dummy/boiler plate implementation to fix the build. Acked-by: "Rafael J. Wysocki" Signed-off-by: Sudeep Holla Signed-off-by: Catalin Marinas --- include/linux/acpi.h | 15 +++++++++++++++ include/linux/cacheinfo.h | 2 +- 2 files changed, 16 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 032e12a2fdc2..d2639cd2eafc 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -1297,8 +1297,23 @@ static inline int lpit_read_residency_count_address(u64 *address) } #endif +#ifdef CONFIG_ACPI_PPTT int find_acpi_cpu_topology(unsigned int cpu, int level); int find_acpi_cpu_topology_package(unsigned int cpu); int find_acpi_cpu_cache_topology(unsigned int cpu, int level); +#else +static inline int find_acpi_cpu_topology(unsigned int cpu, int level) +{ + return -EINVAL; +} +static inline int find_acpi_cpu_topology_package(unsigned int cpu) +{ + return -EINVAL; +} +static inline int find_acpi_cpu_cache_topology(unsigned int cpu, int level) +{ + return -EINVAL; +} +#endif #endif /*_LINUX_ACPI_H*/ diff --git a/include/linux/cacheinfo.h b/include/linux/cacheinfo.h index 89397e30e269..70e19bc6cc9f 100644 --- a/include/linux/cacheinfo.h +++ b/include/linux/cacheinfo.h @@ -98,7 +98,7 @@ struct cpu_cacheinfo *get_cpu_cacheinfo(unsigned int cpu); int init_cache_level(unsigned int cpu); int populate_cache_leaves(unsigned int cpu); int cache_setup_acpi(unsigned int cpu); -#ifndef CONFIG_ACPI +#ifndef CONFIG_ACPI_PPTT /* * acpi_find_last_cache_level is only called on ACPI enabled * platforms using the PPTT for topology. This means that if -- cgit v1.2.3 From 24d28e4f1271cb2f91613dada8f2acccd00eff56 Mon Sep 17 00:00:00 2001 From: Nick Dyer Date: Tue, 5 Jun 2018 10:17:51 -0700 Subject: Input: synaptics-rmi4 - convert irq distribution to irq_domain Convert the RMI driver to use the standard mechanism for distributing IRQs to the various functions. Tested on: * S7300 (F11, F34, F54) * S7817 (F12, F34, F54) Signed-off-by: Nick Dyer Acked-by: Christopher Heiny Signed-off-by: Dmitry Torokhov --- include/linux/rmi.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/rmi.h b/include/linux/rmi.h index 64125443f8a6..5ef5c7c412a7 100644 --- a/include/linux/rmi.h +++ b/include/linux/rmi.h @@ -354,6 +354,8 @@ struct rmi_driver_data { struct mutex irq_mutex; struct input_dev *input; + struct irq_domain *irqdomain; + u8 pdt_props; u8 num_rx_electrodes; -- cgit v1.2.3 From 7aaa822ed060719bd4ea012609883b6bc6950508 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Mon, 14 May 2018 15:50:52 -0700 Subject: pstore: Convert internal records to timespec64 This prepares pstore for converting the VFS layer to timespec64. Signed-off-by: Kees Cook Signed-off-by: Deepa Dinamani --- include/linux/pstore.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/pstore.h b/include/linux/pstore.h index 61f806a7fe29..a15bc4d48752 100644 --- a/include/linux/pstore.h +++ b/include/linux/pstore.h @@ -71,7 +71,7 @@ struct pstore_record { struct pstore_info *psi; enum pstore_type_id type; u64 id; - struct timespec time; + struct timespec64 time; char *buf; ssize_t size; ssize_t ecc_notice_size; -- cgit v1.2.3 From 95582b00838837fc07e042979320caf917ce3fe6 Mon Sep 17 00:00:00 2001 From: Deepa Dinamani Date: Tue, 8 May 2018 19:36:02 -0700 Subject: vfs: change inode times to use struct timespec64 struct timespec is not y2038 safe. Transition vfs to use y2038 safe struct timespec64 instead. The change was made with the help of the following cocinelle script. This catches about 80% of the changes. All the header file and logic changes are included in the first 5 rules. The rest are trivial substitutions. I avoid changing any of the function signatures or any other filesystem specific data structures to keep the patch simple for review. The script can be a little shorter by combining different cases. But, this version was sufficient for my usecase. virtual patch @ depends on patch @ identifier now; @@ - struct timespec + struct timespec64 current_time ( ... ) { - struct timespec now = current_kernel_time(); + struct timespec64 now = current_kernel_time64(); ... - return timespec_trunc( + return timespec64_trunc( ... ); } @ depends on patch @ identifier xtime; @@ struct \( iattr \| inode \| kstat \) { ... - struct timespec xtime; + struct timespec64 xtime; ... } @ depends on patch @ identifier t; @@ struct inode_operations { ... int (*update_time) (..., - struct timespec t, + struct timespec64 t, ...); ... } @ depends on patch @ identifier t; identifier fn_update_time =~ "update_time$"; @@ fn_update_time (..., - struct timespec *t, + struct timespec64 *t, ...) { ... } @ depends on patch @ identifier t; @@ lease_get_mtime( ... , - struct timespec *t + struct timespec64 *t ) { ... } @te depends on patch forall@ identifier ts; local idexpression struct inode *inode_node; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn_update_time =~ "update_time$"; identifier fn; expression e, E3; local idexpression struct inode *node1; local idexpression struct inode *node2; local idexpression struct iattr *attr1; local idexpression struct iattr *attr2; local idexpression struct iattr attr; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; @@ ( ( - struct timespec ts; + struct timespec64 ts; | - struct timespec ts = current_time(inode_node); + struct timespec64 ts = current_time(inode_node); ) <+... when != ts ( - timespec_equal(&inode_node->i_xtime, &ts) + timespec64_equal(&inode_node->i_xtime, &ts) | - timespec_equal(&ts, &inode_node->i_xtime) + timespec64_equal(&ts, &inode_node->i_xtime) | - timespec_compare(&inode_node->i_xtime, &ts) + timespec64_compare(&inode_node->i_xtime, &ts) | - timespec_compare(&ts, &inode_node->i_xtime) + timespec64_compare(&ts, &inode_node->i_xtime) | ts = current_time(e) | fn_update_time(..., &ts,...) | inode_node->i_xtime = ts | node1->i_xtime = ts | ts = inode_node->i_xtime | <+... attr1->ia_xtime ...+> = ts | ts = attr1->ia_xtime | ts.tv_sec | ts.tv_nsec | btrfs_set_stack_timespec_sec(..., ts.tv_sec) | btrfs_set_stack_timespec_nsec(..., ts.tv_nsec) | - ts = timespec64_to_timespec( + ts = ... -) | - ts = ktime_to_timespec( + ts = ktime_to_timespec64( ...) | - ts = E3 + ts = timespec_to_timespec64(E3) | - ktime_get_real_ts(&ts) + ktime_get_real_ts64(&ts) | fn(..., - ts + timespec64_to_timespec(ts) ,...) ) ...+> ( <... when != ts - return ts; + return timespec64_to_timespec(ts); ...> ) | - timespec_equal(&node1->i_xtime1, &node2->i_xtime2) + timespec64_equal(&node1->i_xtime2, &node2->i_xtime2) | - timespec_equal(&node1->i_xtime1, &attr2->ia_xtime2) + timespec64_equal(&node1->i_xtime2, &attr2->ia_xtime2) | - timespec_compare(&node1->i_xtime1, &node2->i_xtime2) + timespec64_compare(&node1->i_xtime1, &node2->i_xtime2) | node1->i_xtime1 = - timespec_trunc(attr1->ia_xtime1, + timespec64_trunc(attr1->ia_xtime1, ...) | - attr1->ia_xtime1 = timespec_trunc(attr2->ia_xtime2, + attr1->ia_xtime1 = timespec64_trunc(attr2->ia_xtime2, ...) | - ktime_get_real_ts(&attr1->ia_xtime1) + ktime_get_real_ts64(&attr1->ia_xtime1) | - ktime_get_real_ts(&attr.ia_xtime1) + ktime_get_real_ts64(&attr.ia_xtime1) ) @ depends on patch @ struct inode *node; struct iattr *attr; identifier fn; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; expression e; @@ ( - fn(node->i_xtime); + fn(timespec64_to_timespec(node->i_xtime)); | fn(..., - node->i_xtime); + timespec64_to_timespec(node->i_xtime)); | - e = fn(attr->ia_xtime); + e = fn(timespec64_to_timespec(attr->ia_xtime)); ) @ depends on patch forall @ struct inode *node; struct iattr *attr; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); fn (..., - &attr->ia_xtime, + &ts, ...); ) ...+> } @ depends on patch forall @ struct inode *node; struct iattr *attr; struct kstat *stat; identifier ia_xtime =~ "^ia_[acm]time$"; identifier i_xtime =~ "^i_[acm]time$"; identifier xtime =~ "^[acm]time$"; identifier fn, ret; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime); + &ts); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime); + &ts); | + ts = timespec64_to_timespec(stat->xtime); ret = fn (..., - &stat->xtime); + &ts); ) ...+> } @ depends on patch @ struct inode *node; struct inode *node2; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier i_xtime3 =~ "^i_[acm]time$"; struct iattr *attrp; struct iattr *attrp2; struct iattr attr ; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; struct kstat *stat; struct kstat stat1; struct timespec64 ts; identifier xtime =~ "^[acmb]time$"; expression e; @@ ( ( node->i_xtime2 \| attrp->ia_xtime2 \| attr.ia_xtime2 \) = node->i_xtime1 ; | node->i_xtime2 = \( node2->i_xtime1 \| timespec64_trunc(...) \); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | stat->xtime = node2->i_xtime1; | stat1.xtime = node2->i_xtime1; | ( node->i_xtime2 \| attrp->ia_xtime2 \) = attrp->ia_xtime1 ; | ( attrp->ia_xtime1 \| attr.ia_xtime1 \) = attrp2->ia_xtime2; | - e = node->i_xtime1; + e = timespec64_to_timespec( node->i_xtime1 ); | - e = attrp->ia_xtime1; + e = timespec64_to_timespec( attrp->ia_xtime1 ); | node->i_xtime1 = current_time(...); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | - node->i_xtime1 = e; + node->i_xtime1 = timespec_to_timespec64(e); ) Signed-off-by: Deepa Dinamani Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: --- include/linux/fs.h | 23 ++++++++++++----------- include/linux/stat.h | 8 ++++---- 2 files changed, 16 insertions(+), 15 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 7f6997e0dabf..f15329aa9cad 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -206,9 +206,9 @@ struct iattr { kuid_t ia_uid; kgid_t ia_gid; loff_t ia_size; - struct timespec ia_atime; - struct timespec ia_mtime; - struct timespec ia_ctime; + struct timespec64 ia_atime; + struct timespec64 ia_mtime; + struct timespec64 ia_ctime; /* * Not an attribute, but an auxiliary info for filesystems wanting to @@ -602,9 +602,9 @@ struct inode { }; dev_t i_rdev; loff_t i_size; - struct timespec i_atime; - struct timespec i_mtime; - struct timespec i_ctime; + struct timespec64 i_atime; + struct timespec64 i_mtime; + struct timespec64 i_ctime; spinlock_t i_lock; /* i_blocks, i_bytes, maybe i_size */ unsigned short i_bytes; unsigned int i_blkbits; @@ -1091,7 +1091,7 @@ extern int vfs_lock_file(struct file *, unsigned int, struct file_lock *, struct extern int vfs_cancel_lock(struct file *filp, struct file_lock *fl); extern int locks_lock_inode_wait(struct inode *inode, struct file_lock *fl); extern int __break_lease(struct inode *inode, unsigned int flags, unsigned int type); -extern void lease_get_mtime(struct inode *, struct timespec *time); +extern void lease_get_mtime(struct inode *, struct timespec64 *time); extern int generic_setlease(struct file *, long, struct file_lock **, void **priv); extern int vfs_setlease(struct file *, long, struct file_lock **, void **); extern int lease_modify(struct file_lock *, int, struct list_head *); @@ -1206,7 +1206,8 @@ static inline int __break_lease(struct inode *inode, unsigned int mode, unsigned return 0; } -static inline void lease_get_mtime(struct inode *inode, struct timespec *time) +static inline void lease_get_mtime(struct inode *inode, + struct timespec64 *time) { return; } @@ -1477,7 +1478,7 @@ static inline void i_gid_write(struct inode *inode, gid_t gid) } extern struct timespec64 timespec64_trunc(struct timespec64 t, unsigned gran); -extern struct timespec current_time(struct inode *inode); +extern struct timespec64 current_time(struct inode *inode); /* * Snapshotting support. @@ -1765,7 +1766,7 @@ struct inode_operations { ssize_t (*listxattr) (struct dentry *, char *, size_t); int (*fiemap)(struct inode *, struct fiemap_extent_info *, u64 start, u64 len); - int (*update_time)(struct inode *, struct timespec *, int); + int (*update_time)(struct inode *, struct timespec64 *, int); int (*atomic_open)(struct inode *, struct dentry *, struct file *, unsigned open_flag, umode_t create_mode, int *opened); @@ -2199,7 +2200,7 @@ extern int current_umask(void); extern void ihold(struct inode * inode); extern void iput(struct inode *); -extern int generic_update_time(struct inode *, struct timespec *, int); +extern int generic_update_time(struct inode *, struct timespec64 *, int); /* /sys/fs */ extern struct kobject *fs_kobj; diff --git a/include/linux/stat.h b/include/linux/stat.h index 22484e44544d..765573dc17d6 100644 --- a/include/linux/stat.h +++ b/include/linux/stat.h @@ -41,10 +41,10 @@ struct kstat { kuid_t uid; kgid_t gid; loff_t size; - struct timespec atime; - struct timespec mtime; - struct timespec ctime; - struct timespec btime; /* File creation time */ + struct timespec64 atime; + struct timespec64 mtime; + struct timespec64 ctime; + struct timespec64 btime; /* File creation time */ u64 blocks; }; -- cgit v1.2.3 From 3c095f32a92be4d07f3172a777dab1aacdb6a728 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Thu, 31 May 2018 12:59:58 +0200 Subject: PM / Domains: Add support for multi PM domains per device to genpd To support devices being partitioned across multiple PM domains, let's begin with extending genpd to cope with these kind of configurations. Therefore, add a new exported function genpd_dev_pm_attach_by_id(), which is similar to the existing genpd_dev_pm_attach(), but with the difference that it allows its callers to provide an index to the PM domain that it wants to attach. Note that, genpd_dev_pm_attach_by_id() shall only be called by the driver core / PM core, similar to how the existing dev_pm_domain_attach() makes use of genpd_dev_pm_attach(). However, this is implemented by following changes on top. Because, only one PM domain can be attached per device, genpd needs to create a virtual device that it can attach/detach instead. More precisely, let the new function genpd_dev_pm_attach_by_id() register a virtual struct device via calling device_register(). Then let it attach this device to the corresponding PM domain, rather than the one that is provided by the caller. The actual attaching is done via re-using the existing genpd OF functions. At successful attachment, genpd_dev_pm_attach_by_id() returns the created virtual device, which allows the caller to operate on it to deal with power management. Following changes on top, provides more details in this regards. To deal with detaching of a PM domain for the multiple PM domains case, let's also extend the existing genpd_dev_pm_detach() function, to cover the cleanup of the created virtual device, via make it call device_unregister() on it. In this way, there is no need to introduce a new function to deal with detach for the multiple PM domain case, but instead the existing one is re-used. Signed-off-by: Ulf Hansson Acked-by: Jon Hunter Tested-by: Jon Hunter Reviewed-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- include/linux/pm_domain.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h index 42e0d649e653..82458e8e2e01 100644 --- a/include/linux/pm_domain.h +++ b/include/linux/pm_domain.h @@ -237,6 +237,8 @@ unsigned int of_genpd_opp_to_performance_state(struct device *dev, struct device_node *opp_node); int genpd_dev_pm_attach(struct device *dev); +struct device *genpd_dev_pm_attach_by_id(struct device *dev, + unsigned int index); #else /* !CONFIG_PM_GENERIC_DOMAINS_OF */ static inline int of_genpd_add_provider_simple(struct device_node *np, struct generic_pm_domain *genpd) @@ -282,6 +284,12 @@ static inline int genpd_dev_pm_attach(struct device *dev) return 0; } +static inline struct device *genpd_dev_pm_attach_by_id(struct device *dev, + unsigned int index) +{ + return NULL; +} + static inline struct generic_pm_domain *of_genpd_remove_last(struct device_node *np) { -- cgit v1.2.3 From 82e12d9e0bd59f3d24be9c735258e2e98e4f54f6 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Thu, 31 May 2018 12:59:59 +0200 Subject: PM / Domains: Add dev_pm_domain_attach_by_id() to manage multi PM domains The existing dev_pm_domain_attach() function, allows a single PM domain to be attached per device. To be able to support devices that are partitioned across multiple PM domains, let's introduce a new interface, dev_pm_domain_attach_by_id(). The dev_pm_domain_attach_by_id() returns a new allocated struct device with the corresponding attached PM domain. This enables for example a driver to operate on the new device from a power management point of view. The driver may then also benefit from using the received device, to set up so called device-links towards its original device. Depending on the situation, these links may then be dynamically changed. The new interface is typically called by drivers during their probe phase, in case they manages devices which uses multiple PM domains. If that is the case, the driver also becomes responsible of managing the detaching of the PM domains, which typically should be done at the remove phase. Detaching is done by calling the existing dev_pm_domain_detach() function and for each of the received devices from dev_pm_domain_attach_by_id(). Note, currently its only genpd that supports multiple PM domains per device, but dev_pm_domain_attach_by_id() can easily by extended to cover other PM domain types, if/when needed. Signed-off-by: Ulf Hansson Acked-by: Jon Hunter Tested-by: Jon Hunter Reviewed-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- include/linux/pm_domain.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h index 82458e8e2e01..9206a4fef9ac 100644 --- a/include/linux/pm_domain.h +++ b/include/linux/pm_domain.h @@ -299,6 +299,8 @@ struct generic_pm_domain *of_genpd_remove_last(struct device_node *np) #ifdef CONFIG_PM int dev_pm_domain_attach(struct device *dev, bool power_on); +struct device *dev_pm_domain_attach_by_id(struct device *dev, + unsigned int index); void dev_pm_domain_detach(struct device *dev, bool power_off); void dev_pm_domain_set(struct device *dev, struct dev_pm_domain *pd); #else @@ -306,6 +308,11 @@ static inline int dev_pm_domain_attach(struct device *dev, bool power_on) { return 0; } +static inline struct device *dev_pm_domain_attach_by_id(struct device *dev, + unsigned int index) +{ + return NULL; +} static inline void dev_pm_domain_detach(struct device *dev, bool power_off) {} static inline void dev_pm_domain_set(struct device *dev, struct dev_pm_domain *pd) {} -- cgit v1.2.3 From d7822b1e24f2df5df98c76f0e94a5416349ff759 Mon Sep 17 00:00:00 2001 From: Mathieu Desnoyers Date: Sat, 2 Jun 2018 08:43:54 -0400 Subject: rseq: Introduce restartable sequences system call Expose a new system call allowing each thread to register one userspace memory area to be used as an ABI between kernel and user-space for two purposes: user-space restartable sequences and quick access to read the current CPU number value from user-space. * Restartable sequences (per-cpu atomics) Restartables sequences allow user-space to perform update operations on per-cpu data without requiring heavy-weight atomic operations. The restartable critical sections (percpu atomics) work has been started by Paul Turner and Andrew Hunter. It lets the kernel handle restart of critical sections. [1] [2] The re-implementation proposed here brings a few simplifications to the ABI which facilitates porting to other architectures and speeds up the user-space fast path. Here are benchmarks of various rseq use-cases. Test hardware: arm32: ARMv7 Processor rev 4 (v7l) "Cubietruck", 2-core x86-64: Intel E5-2630 v3@2.40GHz, 16-core, hyperthreading The following benchmarks were all performed on a single thread. * Per-CPU statistic counter increment getcpu+atomic (ns/op) rseq (ns/op) speedup arm32: 344.0 31.4 11.0 x86-64: 15.3 2.0 7.7 * LTTng-UST: write event 32-bit header, 32-bit payload into tracer per-cpu buffer getcpu+atomic (ns/op) rseq (ns/op) speedup arm32: 2502.0 2250.0 1.1 x86-64: 117.4 98.0 1.2 * liburcu percpu: lock-unlock pair, dereference, read/compare word getcpu+atomic (ns/op) rseq (ns/op) speedup arm32: 751.0 128.5 5.8 x86-64: 53.4 28.6 1.9 * jemalloc memory allocator adapted to use rseq Using rseq with per-cpu memory pools in jemalloc at Facebook (based on rseq 2016 implementation): The production workload response-time has 1-2% gain avg. latency, and the P99 overall latency drops by 2-3%. * Reading the current CPU number Speeding up reading the current CPU number on which the caller thread is running is done by keeping the current CPU number up do date within the cpu_id field of the memory area registered by the thread. This is done by making scheduler preemption set the TIF_NOTIFY_RESUME flag on the current thread. Upon return to user-space, a notify-resume handler updates the current CPU value within the registered user-space memory area. User-space can then read the current CPU number directly from memory. Keeping the current cpu id in a memory area shared between kernel and user-space is an improvement over current mechanisms available to read the current CPU number, which has the following benefits over alternative approaches: - 35x speedup on ARM vs system call through glibc - 20x speedup on x86 compared to calling glibc, which calls vdso executing a "lsl" instruction, - 14x speedup on x86 compared to inlined "lsl" instruction, - Unlike vdso approaches, this cpu_id value can be read from an inline assembly, which makes it a useful building block for restartable sequences. - The approach of reading the cpu id through memory mapping shared between kernel and user-space is portable (e.g. ARM), which is not the case for the lsl-based x86 vdso. On x86, yet another possible approach would be to use the gs segment selector to point to user-space per-cpu data. This approach performs similarly to the cpu id cache, but it has two disadvantages: it is not portable, and it is incompatible with existing applications already using the gs segment selector for other purposes. Benchmarking various approaches for reading the current CPU number: ARMv7 Processor rev 4 (v7l) Machine model: Cubietruck - Baseline (empty loop): 8.4 ns - Read CPU from rseq cpu_id: 16.7 ns - Read CPU from rseq cpu_id (lazy register): 19.8 ns - glibc 2.19-0ubuntu6.6 getcpu: 301.8 ns - getcpu system call: 234.9 ns x86-64 Intel(R) Xeon(R) CPU E5-2630 v3 @ 2.40GHz: - Baseline (empty loop): 0.8 ns - Read CPU from rseq cpu_id: 0.8 ns - Read CPU from rseq cpu_id (lazy register): 0.8 ns - Read using gs segment selector: 0.8 ns - "lsl" inline assembly: 13.0 ns - glibc 2.19-0ubuntu6 getcpu: 16.6 ns - getcpu system call: 53.9 ns - Speed (benchmark taken on v8 of patchset) Running 10 runs of hackbench -l 100000 seems to indicate, contrary to expectations, that enabling CONFIG_RSEQ slightly accelerates the scheduler: Configuration: 2 sockets * 8-core Intel(R) Xeon(R) CPU E5-2630 v3 @ 2.40GHz (directly on hardware, hyperthreading disabled in BIOS, energy saving disabled in BIOS, turboboost disabled in BIOS, cpuidle.off=1 kernel parameter), with a Linux v4.6 defconfig+localyesconfig, restartable sequences series applied. * CONFIG_RSEQ=n avg.: 41.37 s std.dev.: 0.36 s * CONFIG_RSEQ=y avg.: 40.46 s std.dev.: 0.33 s - Size On x86-64, between CONFIG_RSEQ=n/y, the text size increase of vmlinux is 567 bytes, and the data size increase of vmlinux is 5696 bytes. [1] https://lwn.net/Articles/650333/ [2] http://www.linuxplumbersconf.org/2013/ocw/system/presentations/1695/original/LPC%20-%20PerCpu%20Atomics.pdf Signed-off-by: Mathieu Desnoyers Signed-off-by: Thomas Gleixner Acked-by: Peter Zijlstra (Intel) Cc: Joel Fernandes Cc: Catalin Marinas Cc: Dave Watson Cc: Will Deacon Cc: Andi Kleen Cc: "H . Peter Anvin" Cc: Chris Lameter Cc: Russell King Cc: Andrew Hunter Cc: Michael Kerrisk Cc: "Paul E . McKenney" Cc: Paul Turner Cc: Boqun Feng Cc: Josh Triplett Cc: Steven Rostedt Cc: Ben Maurer Cc: Alexander Viro Cc: linux-api@vger.kernel.org Cc: Andy Lutomirski Cc: Andrew Morton Cc: Linus Torvalds Link: http://lkml.kernel.org/r/20151027235635.16059.11630.stgit@pjt-glaptop.roam.corp.google.com Link: http://lkml.kernel.org/r/20150624222609.6116.86035.stgit@kitami.mtv.corp.google.com Link: https://lkml.kernel.org/r/20180602124408.8430-3-mathieu.desnoyers@efficios.com --- include/linux/sched.h | 134 +++++++++++++++++++++++++++++++++++++++++++++++ include/linux/syscalls.h | 4 +- 2 files changed, 137 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 14e4f9c12337..3aa4fcb74e76 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -27,6 +27,7 @@ #include #include #include +#include /* task_struct member predeclarations (sorted alphabetically): */ struct audit_context; @@ -1047,6 +1048,17 @@ struct task_struct { unsigned long numa_pages_migrated; #endif /* CONFIG_NUMA_BALANCING */ +#ifdef CONFIG_RSEQ + struct rseq __user *rseq; + u32 rseq_len; + u32 rseq_sig; + /* + * RmW on rseq_event_mask must be performed atomically + * with respect to preemption. + */ + unsigned long rseq_event_mask; +#endif + struct tlbflush_unmap_batch tlb_ubc; struct rcu_head rcu; @@ -1757,4 +1769,126 @@ extern long sched_getaffinity(pid_t pid, struct cpumask *mask); #define TASK_SIZE_OF(tsk) TASK_SIZE #endif +#ifdef CONFIG_RSEQ + +/* + * Map the event mask on the user-space ABI enum rseq_cs_flags + * for direct mask checks. + */ +enum rseq_event_mask_bits { + RSEQ_EVENT_PREEMPT_BIT = RSEQ_CS_FLAG_NO_RESTART_ON_PREEMPT_BIT, + RSEQ_EVENT_SIGNAL_BIT = RSEQ_CS_FLAG_NO_RESTART_ON_SIGNAL_BIT, + RSEQ_EVENT_MIGRATE_BIT = RSEQ_CS_FLAG_NO_RESTART_ON_MIGRATE_BIT, +}; + +enum rseq_event_mask { + RSEQ_EVENT_PREEMPT = (1U << RSEQ_EVENT_PREEMPT_BIT), + RSEQ_EVENT_SIGNAL = (1U << RSEQ_EVENT_SIGNAL_BIT), + RSEQ_EVENT_MIGRATE = (1U << RSEQ_EVENT_MIGRATE_BIT), +}; + +static inline void rseq_set_notify_resume(struct task_struct *t) +{ + if (t->rseq) + set_tsk_thread_flag(t, TIF_NOTIFY_RESUME); +} + +void __rseq_handle_notify_resume(struct pt_regs *regs); + +static inline void rseq_handle_notify_resume(struct pt_regs *regs) +{ + if (current->rseq) + __rseq_handle_notify_resume(regs); +} + +static inline void rseq_signal_deliver(struct pt_regs *regs) +{ + preempt_disable(); + __set_bit(RSEQ_EVENT_SIGNAL_BIT, ¤t->rseq_event_mask); + preempt_enable(); + rseq_handle_notify_resume(regs); +} + +/* rseq_preempt() requires preemption to be disabled. */ +static inline void rseq_preempt(struct task_struct *t) +{ + __set_bit(RSEQ_EVENT_PREEMPT_BIT, &t->rseq_event_mask); + rseq_set_notify_resume(t); +} + +/* rseq_migrate() requires preemption to be disabled. */ +static inline void rseq_migrate(struct task_struct *t) +{ + __set_bit(RSEQ_EVENT_MIGRATE_BIT, &t->rseq_event_mask); + rseq_set_notify_resume(t); +} + +/* + * If parent process has a registered restartable sequences area, the + * child inherits. Only applies when forking a process, not a thread. In + * case a parent fork() in the middle of a restartable sequence, set the + * resume notifier to force the child to retry. + */ +static inline void rseq_fork(struct task_struct *t, unsigned long clone_flags) +{ + if (clone_flags & CLONE_THREAD) { + t->rseq = NULL; + t->rseq_len = 0; + t->rseq_sig = 0; + t->rseq_event_mask = 0; + } else { + t->rseq = current->rseq; + t->rseq_len = current->rseq_len; + t->rseq_sig = current->rseq_sig; + t->rseq_event_mask = current->rseq_event_mask; + rseq_preempt(t); + } +} + +static inline void rseq_execve(struct task_struct *t) +{ + t->rseq = NULL; + t->rseq_len = 0; + t->rseq_sig = 0; + t->rseq_event_mask = 0; +} + +#else + +static inline void rseq_set_notify_resume(struct task_struct *t) +{ +} +static inline void rseq_handle_notify_resume(struct pt_regs *regs) +{ +} +static inline void rseq_signal_deliver(struct pt_regs *regs) +{ +} +static inline void rseq_preempt(struct task_struct *t) +{ +} +static inline void rseq_migrate(struct task_struct *t) +{ +} +static inline void rseq_fork(struct task_struct *t, unsigned long clone_flags) +{ +} +static inline void rseq_execve(struct task_struct *t) +{ +} + +#endif + +#ifdef CONFIG_DEBUG_RSEQ + +void rseq_syscall(struct pt_regs *regs); + +#else + +static inline void rseq_syscall(struct pt_regs *regs) +{ +} + +#endif + #endif diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index 390e814fdc8d..73810808cdf2 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -66,6 +66,7 @@ struct old_linux_dirent; struct perf_event_attr; struct file_handle; struct sigaltstack; +struct rseq; union bpf_attr; #include @@ -897,7 +898,8 @@ asmlinkage long sys_pkey_alloc(unsigned long flags, unsigned long init_val); asmlinkage long sys_pkey_free(int pkey); asmlinkage long sys_statx(int dfd, const char __user *path, unsigned flags, unsigned mask, struct statx __user *buffer); - +asmlinkage long sys_rseq(struct rseq __user *rseq, uint32_t rseq_len, + int flags, uint32_t sig); /* * Architecture-specific system calls -- cgit v1.2.3 From bd975e691486ba52790ba23cc9b4fecab7bc0d31 Mon Sep 17 00:00:00 2001 From: Jozsef Kadlecsik Date: Thu, 31 May 2018 18:45:21 +0200 Subject: netfilter: ipset: List timing out entries with "timeout 1" instead of zero When listing sets with timeout support, there's a probability that just timing out entries with "0" timeout value is listed/saved. However when restoring the saved list, the zero timeout value means permanent elelements. The new behaviour is that timing out entries are listed with "timeout 1" instead of zero. Fixes netfilter bugzilla #1258. Signed-off-by: Jozsef Kadlecsik --- include/linux/netfilter/ipset/ip_set_timeout.h | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netfilter/ipset/ip_set_timeout.h b/include/linux/netfilter/ipset/ip_set_timeout.h index bfb3531fd88a..7ad8ddf9ca8a 100644 --- a/include/linux/netfilter/ipset/ip_set_timeout.h +++ b/include/linux/netfilter/ipset/ip_set_timeout.h @@ -65,8 +65,14 @@ ip_set_timeout_set(unsigned long *timeout, u32 value) static inline u32 ip_set_timeout_get(const unsigned long *timeout) { - return *timeout == IPSET_ELEM_PERMANENT ? 0 : - jiffies_to_msecs(*timeout - jiffies)/MSEC_PER_SEC; + u32 t; + + if (*timeout == IPSET_ELEM_PERMANENT) + return 0; + + t = jiffies_to_msecs(*timeout - jiffies)/MSEC_PER_SEC; + /* Zero value in userspace means no timeout */ + return t == 0 ? 1 : t; } #endif /* __KERNEL__ */ -- cgit v1.2.3 From 30a2e107108c66cbcb7776b58cbcd7db223a1cc9 Mon Sep 17 00:00:00 2001 From: Jozsef Kadlecsik Date: Tue, 5 Jun 2018 11:53:35 +0200 Subject: netfilter: ipset: Limit max timeout value Due to the negative value condition in msecs_to_jiffies(), the real max possible timeout value must be set to (UINT_MAX >> 1)/MSEC_PER_SEC. Neutron Soutmun proposed the proper fix, but an insufficient one was applied, see https://patchwork.ozlabs.org/patch/400405/. Signed-off-by: Jozsef Kadlecsik --- include/linux/netfilter/ipset/ip_set_timeout.h | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netfilter/ipset/ip_set_timeout.h b/include/linux/netfilter/ipset/ip_set_timeout.h index 7ad8ddf9ca8a..8ce271e187b6 100644 --- a/include/linux/netfilter/ipset/ip_set_timeout.h +++ b/include/linux/netfilter/ipset/ip_set_timeout.h @@ -23,6 +23,9 @@ /* Set is defined with timeout support: timeout value may be 0 */ #define IPSET_NO_TIMEOUT UINT_MAX +/* Max timeout value, see msecs_to_jiffies() in jiffies.h */ +#define IPSET_MAX_TIMEOUT (UINT_MAX >> 1)/MSEC_PER_SEC + #define ip_set_adt_opt_timeout(opt, set) \ ((opt)->ext.timeout != IPSET_NO_TIMEOUT ? (opt)->ext.timeout : (set)->timeout) @@ -32,11 +35,10 @@ ip_set_timeout_uget(struct nlattr *tb) unsigned int timeout = ip_set_get_h32(tb); /* Normalize to fit into jiffies */ - if (timeout > UINT_MAX/MSEC_PER_SEC) - timeout = UINT_MAX/MSEC_PER_SEC; + if (timeout > IPSET_MAX_TIMEOUT) + timeout = IPSET_MAX_TIMEOUT; - /* Userspace supplied TIMEOUT parameter: adjust crazy size */ - return timeout == IPSET_NO_TIMEOUT ? IPSET_NO_TIMEOUT - 1 : timeout; + return timeout; } static inline bool -- cgit v1.2.3 From d340ebd696f921d3ad01b8c0c29dd38f2ad2bf3e Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 6 Jun 2018 14:46:59 +0200 Subject: genirq/migration: Avoid out of line call if pending is not set The upcoming fix for the -EBUSY return from affinity settings requires to use the irq_move_irq() functionality even on irq remapped interrupts. To avoid the out of line call, move the check for the pending bit into an inline helper. Preparatory change for the real fix. No functional change. Fixes: dccfe3147b42 ("x86/vector: Simplify vector move cleanup") Signed-off-by: Thomas Gleixner Cc: Joerg Roedel Cc: Peter Zijlstra Cc: Song Liu Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: stable@vger.kernel.org Cc: Mike Travis Cc: Borislav Petkov Cc: Tariq Toukan Cc: Dou Liyang Link: https://lkml.kernel.org/r/20180604162224.471925894@linutronix.de --- include/linux/irq.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/irq.h b/include/linux/irq.h index 65916a305f3d..4e66378f290b 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -551,7 +551,12 @@ extern int irq_affinity_online_cpu(unsigned int cpu); #endif #if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_PENDING_IRQ) -void irq_move_irq(struct irq_data *data); +void __irq_move_irq(struct irq_data *data); +static inline void irq_move_irq(struct irq_data *data) +{ + if (unlikely(irqd_is_setaffinity_pending(data))) + __irq_move_irq(data); +} void irq_move_masked_irq(struct irq_data *data); void irq_force_complete_move(struct irq_desc *desc); #else -- cgit v1.2.3 From e536700ef5bf9788af185bf890a52f296d055ed7 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 7 Jun 2018 14:10:56 +0100 Subject: regulator: gpio: Revert regulator: fixed/gpio: Revert GPIO descriptor changes due to platform breakage Commit 6059577cb28 "regulator: fixed: Convert to use GPIO descriptor only" broke at least the ams-delta platform since the lookup tables added to the board files use the function name "enable" while the driver uses NULL causing the regulator to not acquire and control the enable GPIOs. Revert that and a couple of other commits that are caught up with it to fix the issue: 2b6c00c157c5bf80 "ARM: pxa, regulator: fix building ezx e680" 6059577cb28d8b15 "regulator: fixed: Convert to use GPIO descriptor only" 37bed97f00734ce3 "regulator: gpio: Get enable GPIO using GPIO descriptor" Reported-by: Janusz Krzysztofik Signed-off-by: Mark Brown --- include/linux/regulator/fixed.h | 3 +++ include/linux/regulator/gpio-regulator.h | 3 +++ 2 files changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/regulator/fixed.h b/include/linux/regulator/fixed.h index 1a4340ed8e2b..48918be649d4 100644 --- a/include/linux/regulator/fixed.h +++ b/include/linux/regulator/fixed.h @@ -24,6 +24,8 @@ struct regulator_init_data; * @supply_name: Name of the regulator supply * @input_supply: Name of the input regulator supply * @microvolts: Output voltage of regulator + * @gpio: GPIO to use for enable control + * set to -EINVAL if not used * @startup_delay: Start-up time in microseconds * @gpio_is_open_drain: Gpio pin is open drain or normal type. * If it is open drain type then HIGH will be set @@ -47,6 +49,7 @@ struct fixed_voltage_config { const char *supply_name; const char *input_supply; int microvolts; + int gpio; unsigned startup_delay; unsigned gpio_is_open_drain:1; unsigned enable_high:1; diff --git a/include/linux/regulator/gpio-regulator.h b/include/linux/regulator/gpio-regulator.h index 536cab86f2d5..19fbd267406d 100644 --- a/include/linux/regulator/gpio-regulator.h +++ b/include/linux/regulator/gpio-regulator.h @@ -44,6 +44,8 @@ struct gpio_regulator_state { /** * struct gpio_regulator_config - config structure * @supply_name: Name of the regulator supply + * @enable_gpio: GPIO to use for enable control + * set to -EINVAL if not used * @enable_high: Polarity of enable GPIO * 1 = Active high, 0 = Active low * @enabled_at_boot: Whether regulator has been enabled at @@ -67,6 +69,7 @@ struct gpio_regulator_state { struct gpio_regulator_config { const char *supply_name; + int enable_gpio; unsigned enable_high:1; unsigned enabled_at_boot:1; unsigned startup_delay; -- cgit v1.2.3 From 55e49dc43a835b19567e62142cb1c87dc7db7b3c Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Thu, 19 Apr 2018 20:29:41 +0300 Subject: virtio_ring: switch to dma_XX barriers for rpmsg virtio is using barriers to order memory accesses, thus dma_wmb/rmb is a good match. Before [mst@tuck linux]$ size drivers/virtio/virtio_ring.o text data bss dec hex filename 11392 820 0 12212 2fb4 drivers/virtio/virtio_ring.o After mst@tuck linux]$ size drivers/virtio/virtio_ring.o text data bss dec hex filename 11284 820 0 12104 2f48 drivers/virtio/virtio_ring.o Cc: Ohad Ben-Cohen Cc: Bjorn Andersson Cc: linux-remoteproc@vger.kernel.org Signed-off-by: Michael S. Tsirkin --- include/linux/virtio_ring.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/virtio_ring.h b/include/linux/virtio_ring.h index bbf32524ab27..fab02133a919 100644 --- a/include/linux/virtio_ring.h +++ b/include/linux/virtio_ring.h @@ -35,7 +35,7 @@ static inline void virtio_rmb(bool weak_barriers) if (weak_barriers) virt_rmb(); else - rmb(); + dma_rmb(); } static inline void virtio_wmb(bool weak_barriers) @@ -43,7 +43,7 @@ static inline void virtio_wmb(bool weak_barriers) if (weak_barriers) virt_wmb(); else - wmb(); + dma_wmb(); } static inline void virtio_store_mb(bool weak_barriers, -- cgit v1.2.3 From fd3a88625844907151737fc3b4201676effa6d27 Mon Sep 17 00:00:00 2001 From: Willem de Bruijn Date: Wed, 6 Jun 2018 11:23:01 -0400 Subject: net: in virtio_net_hdr only add VLAN_HLEN to csum_start if payload holds vlan Tun, tap, virtio, packet and uml vector all use struct virtio_net_hdr to communicate packet metadata to userspace. For skbuffs with vlan, the first two return the packet as it may have existed on the wire, inserting the VLAN tag in the user buffer. Then virtio_net_hdr.csum_start needs to be adjusted by VLAN_HLEN bytes. Commit f09e2249c4f5 ("macvtap: restore vlan header on user read") added this feature to macvtap. Commit 3ce9b20f1971 ("macvtap: Fix csum_start when VLAN tags are present") then fixed up csum_start. Virtio, packet and uml do not insert the vlan header in the user buffer. When introducing virtio_net_hdr_from_skb to deduplicate filling in the virtio_net_hdr, the variant from macvtap which adds VLAN_HLEN was applied uniformly, breaking csum offset for packets with vlan on virtio and packet. Make insertion of VLAN_HLEN optional. Convert the callers to pass it when needed. Fixes: e858fae2b0b8f4 ("virtio_net: use common code for virtio_net_hdr and skb GSO conversion") Fixes: 1276f24eeef2 ("packet: use common code for virtio_net_hdr and skb GSO conversion") Signed-off-by: Willem de Bruijn Signed-off-by: David S. Miller --- include/linux/virtio_net.h | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h index f144216febc6..9397628a1967 100644 --- a/include/linux/virtio_net.h +++ b/include/linux/virtio_net.h @@ -58,7 +58,8 @@ static inline int virtio_net_hdr_to_skb(struct sk_buff *skb, static inline int virtio_net_hdr_from_skb(const struct sk_buff *skb, struct virtio_net_hdr *hdr, bool little_endian, - bool has_data_valid) + bool has_data_valid, + int vlan_hlen) { memset(hdr, 0, sizeof(*hdr)); /* no info leak */ @@ -83,12 +84,8 @@ static inline int virtio_net_hdr_from_skb(const struct sk_buff *skb, if (skb->ip_summed == CHECKSUM_PARTIAL) { hdr->flags = VIRTIO_NET_HDR_F_NEEDS_CSUM; - if (skb_vlan_tag_present(skb)) - hdr->csum_start = __cpu_to_virtio16(little_endian, - skb_checksum_start_offset(skb) + VLAN_HLEN); - else - hdr->csum_start = __cpu_to_virtio16(little_endian, - skb_checksum_start_offset(skb)); + hdr->csum_start = __cpu_to_virtio16(little_endian, + skb_checksum_start_offset(skb) + vlan_hlen); hdr->csum_offset = __cpu_to_virtio16(little_endian, skb->csum_offset); } else if (has_data_valid && -- cgit v1.2.3 From 28e89fd914a22e8a64f05ae2f0048b06165f371b Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 7 Jun 2018 14:42:05 -0600 Subject: block: add bioset_init_from_src() helper Add a helper that allows a caller to initialize a new bio_set, using the settings from an existing bio_set. Reported-by: Venkat R.B Tested-by: Venkat R.B Tested-by: Li Wang Reviewed-by: Mike Snitzer Signed-off-by: Jens Axboe --- include/linux/bio.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/bio.h b/include/linux/bio.h index 810a8bee8f85..84abd1706dcb 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -417,6 +417,7 @@ enum { extern int bioset_init(struct bio_set *, unsigned int, unsigned int, int flags); extern void bioset_exit(struct bio_set *); extern int biovec_init_pool(mempool_t *pool, int pool_entries); +extern int bioset_init_from_src(struct bio_set *bs, struct bio_set *src); extern struct bio *bio_alloc_bioset(gfp_t, unsigned int, struct bio_set *); extern void bio_put(struct bio *); -- cgit v1.2.3 From ec84b27f9b3b569f9235413d1945a2006b97b0aa Mon Sep 17 00:00:00 2001 From: Anna-Maria Gleixner Date: Fri, 25 May 2018 11:05:06 +0200 Subject: rcu: Update documentation of rcu_read_unlock() Since commit b4abf91047cf ("rtmutex: Make wait_lock irq safe") the explanation in rcu_read_unlock() documentation about irq unsafe rtmutex wait_lock is no longer valid. Remove it to prevent kernel developers reading the documentation to rely on it. Suggested-by: Eric W. Biederman Signed-off-by: Anna-Maria Gleixner Signed-off-by: Thomas Gleixner Reviewed-by: Paul E. McKenney Acked-by: "Eric W. Biederman" Cc: bigeasy@linutronix.de Link: https://lkml.kernel.org/r/20180525090507.22248-2-anna-maria@linutronix.de --- include/linux/rcupdate.h | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index e679b175b411..65163aa0bb04 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -652,9 +652,7 @@ static inline void rcu_read_lock(void) * Unfortunately, this function acquires the scheduler's runqueue and * priority-inheritance spinlocks. This means that deadlock could result * if the caller of rcu_read_unlock() already holds one of these locks or - * any lock that is ever acquired while holding them; or any lock which - * can be taken from interrupt context because rcu_boost()->rt_mutex_lock() - * does not disable irqs while taking ->wait_lock. + * any lock that is ever acquired while holding them. * * That said, RCU readers are never priority boosted unless they were * preempted. Therefore, one way to avoid deadlock is to make sure -- cgit v1.2.3 From d5318d302e7cf6583ec85a2a8bfbb3a3910ae372 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 20 Nov 2017 11:45:47 +0100 Subject: backlight: as3711_bl: Fix Device Tree node leaks Two framebuffer device-node names were looked up during probe, but were only used as flags to indicate the presence of two framebuffer device. Drop the unused framebuffer name along with a likewise unused device pointer from the driver data, and update the platform data to pass in booleans instead of the framebuffer strings. This allows us do drop the node references acquired during probe, which would otherwise leak. Note that there are no other in-kernel users of the modified platform-data fields. Fixes: 59eb2b5e57ea ("drivers/video/backlight/as3711_bl.c: add OF support") Signed-off-by: Johan Hovold Acked-by: Daniel Thompson Signed-off-by: Lee Jones --- include/linux/mfd/as3711.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/as3711.h b/include/linux/mfd/as3711.h index 34cc85864be5..ddd0b953323b 100644 --- a/include/linux/mfd/as3711.h +++ b/include/linux/mfd/as3711.h @@ -108,9 +108,9 @@ struct as3711_regulator_pdata { }; struct as3711_bl_pdata { - const char *su1_fb; + bool su1_fb; int su1_max_uA; - const char *su2_fb; + bool su2_fb; int su2_max_uA; enum as3711_su2_feedback su2_feedback; enum as3711_su2_fbprot su2_fbprot; -- cgit v1.2.3 From bf6247a70f2b7569180304041b63b59ab14217bc Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 5 Jun 2018 10:08:44 -0700 Subject: Input: make input_report_slot_state() return boolean Let's make input_report_slot_state() return boolean representing whether the contact is active or not. This will allow writing code like: if (input_mt_report_slot_state(input, obj->mt_tool, obj->type != RMI_2D_OBJECT_NONE) { input_event(sensor->input, EV_ABS, ABS_MT_POSITION_X, obj->x); input_event(sensor->input, EV_ABS, ABS_MT_POSITION_Y, obj->y); ... } instead of: input_mt_report_slot_state(input, obj->mt_tool, obj->type != RMI_2D_OBJECT_NONE); if (obj->type != RMI_2D_OBJECT_NONE) { input_event(sensor->input, EV_ABS, ABS_MT_POSITION_X, obj->x); input_event(sensor->input, EV_ABS, ABS_MT_POSITION_Y, obj->y); ... } Reviewed-by: Henrik Rydberg Acked-by: Benjamin Tissoires Signed-off-by: Dmitry Torokhov --- include/linux/input/mt.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/input/mt.h b/include/linux/input/mt.h index d7188de4db96..3f4bf60b0bb5 100644 --- a/include/linux/input/mt.h +++ b/include/linux/input/mt.h @@ -100,7 +100,7 @@ static inline bool input_is_mt_axis(int axis) return axis == ABS_MT_SLOT || input_is_mt_value(axis); } -void input_mt_report_slot_state(struct input_dev *dev, +bool input_mt_report_slot_state(struct input_dev *dev, unsigned int tool_type, bool active); void input_mt_report_finger_count(struct input_dev *dev, int count); -- cgit v1.2.3 From b06c0b2f087ab498d51d50f5ae353133b602f614 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 12 Jun 2018 10:24:13 +0200 Subject: Revert "PM / runtime: Fixup reference counting of device link suppliers at probe" Revert commit 1e8378619841 (PM / runtime: Fixup reference counting of device link suppliers at probe), as it has introduced a regression and the condition it was designed to address should be covered by the existing code. Reported-by: Marek Szyprowski Signed-off-by: Rafael J. Wysocki --- include/linux/pm_runtime.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h index db5dbbf7a48d..f0fc4700b6ff 100644 --- a/include/linux/pm_runtime.h +++ b/include/linux/pm_runtime.h @@ -56,7 +56,8 @@ extern void pm_runtime_update_max_time_suspended(struct device *dev, s64 delta_ns); extern void pm_runtime_set_memalloc_noio(struct device *dev, bool enable); extern void pm_runtime_clean_up_links(struct device *dev); -extern void pm_runtime_resume_suppliers(struct device *dev); +extern void pm_runtime_get_suppliers(struct device *dev); +extern void pm_runtime_put_suppliers(struct device *dev); extern void pm_runtime_new_link(struct device *dev); extern void pm_runtime_drop_link(struct device *dev); @@ -172,7 +173,8 @@ static inline unsigned long pm_runtime_autosuspend_expiration( static inline void pm_runtime_set_memalloc_noio(struct device *dev, bool enable){} static inline void pm_runtime_clean_up_links(struct device *dev) {} -static inline void pm_runtime_resume_suppliers(struct device *dev) {} +static inline void pm_runtime_get_suppliers(struct device *dev) {} +static inline void pm_runtime_put_suppliers(struct device *dev) {} static inline void pm_runtime_new_link(struct device *dev) {} static inline void pm_runtime_drop_link(struct device *dev) {} -- cgit v1.2.3 From 00979ce4fcc90d488c7f27f750097adc6b11bd07 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Mon, 11 Jun 2018 11:35:26 +0900 Subject: linux/linkage.h: replace VMLINUX_SYMBOL_STR() with __stringify() With the special case handling for Blackfin and Metag was removed by commit 94e58e0ac312 ("export.h: remove code for prefixing symbols with underscore"), VMLINUX_SYMBOL_STR() is now equivalent to __stringify(). Replace the remaining usages in to prepare for the entire removal of VMLINUX_SYMBOL_STR(). Signed-off-by: Masahiro Yamada --- include/linux/linkage.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/linkage.h b/include/linux/linkage.h index f68db9e450eb..d7618c41f74c 100644 --- a/include/linux/linkage.h +++ b/include/linux/linkage.h @@ -24,16 +24,16 @@ #ifndef cond_syscall #define cond_syscall(x) asm( \ - ".weak " VMLINUX_SYMBOL_STR(x) "\n\t" \ - ".set " VMLINUX_SYMBOL_STR(x) "," \ - VMLINUX_SYMBOL_STR(sys_ni_syscall)) + ".weak " __stringify(x) "\n\t" \ + ".set " __stringify(x) "," \ + __stringify(sys_ni_syscall)) #endif #ifndef SYSCALL_ALIAS #define SYSCALL_ALIAS(alias, name) asm( \ - ".globl " VMLINUX_SYMBOL_STR(alias) "\n\t" \ - ".set " VMLINUX_SYMBOL_STR(alias) "," \ - VMLINUX_SYMBOL_STR(name)) + ".globl " __stringify(alias) "\n\t" \ + ".set " __stringify(alias) "," \ + __stringify(name)) #endif #define __page_aligned_data __section(.data..page_aligned) __aligned(PAGE_SIZE) -- cgit v1.2.3 From 155fb5c5fae72d1faa2067d6fa0a5be12279c689 Mon Sep 17 00:00:00 2001 From: Prashant Bhole Date: Mon, 28 May 2018 18:14:49 +0900 Subject: netfilter: fix null-ptr-deref in nf_nat_decode_session Add null check for nat_hook in nf_nat_decode_session() [ 195.648098] UBSAN: Undefined behaviour in ./include/linux/netfilter.h:348:14 [ 195.651366] BUG: KASAN: null-ptr-deref in __xfrm_policy_check+0x208/0x1d70 [ 195.653888] member access within null pointer of type 'struct nf_nat_hook' [ 195.653896] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.17.0-rc6+ #5 [ 195.656320] Read of size 8 at addr 0000000000000008 by task ping/2469 [ 195.658715] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 195.658721] Call Trace: [ 195.661087] [ 195.669341] [ 195.670574] dump_stack+0xc6/0x150 [ 195.672156] ? dump_stack_print_info.cold.0+0x1b/0x1b [ 195.674121] ? ubsan_prologue+0x31/0x92 [ 195.676546] ubsan_epilogue+0x9/0x49 [ 195.678159] handle_null_ptr_deref+0x11a/0x130 [ 195.679800] ? sprint_OID+0x1a0/0x1a0 [ 195.681322] __ubsan_handle_type_mismatch_v1+0xd5/0x11d [ 195.683146] ? ubsan_prologue+0x92/0x92 [ 195.684642] __xfrm_policy_check+0x18ef/0x1d70 [ 195.686294] ? rt_cache_valid+0x118/0x180 [ 195.687804] ? __xfrm_route_forward+0x410/0x410 [ 195.689463] ? fib_multipath_hash+0x700/0x700 [ 195.691109] ? kvm_sched_clock_read+0x23/0x40 [ 195.692805] ? pvclock_clocksource_read+0xf6/0x280 [ 195.694409] ? graph_lock+0xa0/0xa0 [ 195.695824] ? pvclock_clocksource_read+0xf6/0x280 [ 195.697508] ? pvclock_read_flags+0x80/0x80 [ 195.698981] ? kvm_sched_clock_read+0x23/0x40 [ 195.700347] ? sched_clock+0x5/0x10 [ 195.701525] ? sched_clock_cpu+0x18/0x1a0 [ 195.702846] tcp_v4_rcv+0x1d32/0x1de0 [ 195.704115] ? lock_repin_lock+0x70/0x270 [ 195.707072] ? pvclock_read_flags+0x80/0x80 [ 195.709302] ? tcp_v4_early_demux+0x4b0/0x4b0 [ 195.711833] ? lock_acquire+0x195/0x380 [ 195.714222] ? ip_local_deliver_finish+0xfc/0x770 [ 195.716967] ? raw_rcv+0x2b0/0x2b0 [ 195.718856] ? lock_release+0xa00/0xa00 [ 195.720938] ip_local_deliver_finish+0x1b9/0x770 [...] Fixes: 2c205dd3981f ("netfilter: add struct nf_nat_hook and use it") Signed-off-by: Prashant Bhole Acked-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h index 04551af2ff23..dd2052f0efb7 100644 --- a/include/linux/netfilter.h +++ b/include/linux/netfilter.h @@ -345,7 +345,7 @@ nf_nat_decode_session(struct sk_buff *skb, struct flowi *fl, u_int8_t family) rcu_read_lock(); nat_hook = rcu_dereference(nf_nat_hook); - if (nat_hook->decode_session) + if (nat_hook && nat_hook->decode_session) nat_hook->decode_session(skb, fl); rcu_read_unlock(); #endif -- cgit v1.2.3 From ccfbb5bed407053b27492a9adc06064d949a9aa6 Mon Sep 17 00:00:00 2001 From: Anna-Maria Gleixner Date: Tue, 12 Jun 2018 18:16:20 +0200 Subject: atomic: Add irqsave variant of atomic_dec_and_lock() There are in-tree users of atomic_dec_and_lock() which must acquire the spin lock with interrupts disabled. To workaround the lack of an irqsave variant of atomic_dec_and_lock() they use local_irq_save() at the call site. This causes extra code and creates in some places unneeded long interrupt disabled times. These places need also extra treatment for PREEMPT_RT due to the disconnect of the irq disabling and the lock function. Implement the missing irqsave variant of the function. Signed-off-by: Anna-Maria Gleixner Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Thomas Gleixner Acked-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r20180612161621.22645-3-bigeasy@linutronix.de --- include/linux/spinlock.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/spinlock.h b/include/linux/spinlock.h index 1e8a46435838..fd57888d4942 100644 --- a/include/linux/spinlock.h +++ b/include/linux/spinlock.h @@ -427,6 +427,11 @@ extern int _atomic_dec_and_lock(atomic_t *atomic, spinlock_t *lock); #define atomic_dec_and_lock(atomic, lock) \ __cond_lock(lock, _atomic_dec_and_lock(atomic, lock)) +extern int _atomic_dec_and_lock_irqsave(atomic_t *atomic, spinlock_t *lock, + unsigned long *flags); +#define atomic_dec_and_lock_irqsave(atomic, lock, flags) \ + __cond_lock(lock, _atomic_dec_and_lock_irqsave(atomic, lock, &(flags))) + int alloc_bucket_spinlocks(spinlock_t **locks, unsigned int *lock_mask, size_t max_size, unsigned int cpu_mult, gfp_t gfp); -- cgit v1.2.3 From 7ea959c45769612aa92557fb6464679f5fec7d9e Mon Sep 17 00:00:00 2001 From: Anna-Maria Gleixner Date: Tue, 12 Jun 2018 18:16:21 +0200 Subject: locking/refcounts: Implement refcount_dec_and_lock_irqsave() There are in-tree users of refcount_dec_and_lock() which must acquire the spin lock with interrupts disabled. To workaround the lack of an irqsave variant of refcount_dec_and_lock() they use local_irq_save() at the call site. This causes extra code and creates in some places unneeded long interrupt disabled times. These places need also extra treatment for PREEMPT_RT due to the disconnect of the irq disabling and the lock function. Implement the missing irqsave variant of the function. Signed-off-by: Anna-Maria Gleixner Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Thomas Gleixner Acked-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r20180612161621.22645-4-bigeasy@linutronix.de [bigeasy: s@atomic_dec_and_lock@refcount_dec_and_lock@g] --- include/linux/refcount.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/refcount.h b/include/linux/refcount.h index 4193c41e383a..a685da2c4522 100644 --- a/include/linux/refcount.h +++ b/include/linux/refcount.h @@ -98,5 +98,7 @@ extern __must_check bool refcount_dec_if_one(refcount_t *r); extern __must_check bool refcount_dec_not_one(refcount_t *r); extern __must_check bool refcount_dec_and_mutex_lock(refcount_t *r, struct mutex *lock); extern __must_check bool refcount_dec_and_lock(refcount_t *r, spinlock_t *lock); - +extern __must_check bool refcount_dec_and_lock_irqsave(refcount_t *r, + spinlock_t *lock, + unsigned long *flags); #endif /* _LINUX_REFCOUNT_H */ -- cgit v1.2.3 From 1c542f38ab8d30d9c852a16d49ac5a15267bbf1f Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Mon, 11 Jun 2018 14:35:55 -0700 Subject: mm: Introduce kvcalloc() The kv*alloc()-family was missing kvcalloc(). Adding this allows for 2-argument multiplication conversions of kvzalloc(a * b, ...) into kvcalloc(a, b, ...). Signed-off-by: Kees Cook --- include/linux/mm.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mm.h b/include/linux/mm.h index 0e493884e6e1..a0fbb9ffe380 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -575,6 +575,11 @@ static inline void *kvmalloc_array(size_t n, size_t size, gfp_t flags) return kvmalloc(bytes, flags); } +static inline void *kvcalloc(size_t n, size_t size, gfp_t flags) +{ + return kvmalloc_array(n, size, flags | __GFP_ZERO); +} + extern void kvfree(const void *addr); static inline atomic_t *compound_mapcount_ptr(struct page *page) -- cgit v1.2.3 From 050e9baa9dc9fbd9ce2b27f0056990fc9e0a08a0 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 14 Jun 2018 12:21:18 +0900 Subject: Kbuild: rename CC_STACKPROTECTOR[_STRONG] config variables The changes to automatically test for working stack protector compiler support in the Kconfig files removed the special STACKPROTECTOR_AUTO option that picked the strongest stack protector that the compiler supported. That was all a nice cleanup - it makes no sense to have the AUTO case now that the Kconfig phase can just determine the compiler support directly. HOWEVER. It also meant that doing "make oldconfig" would now _disable_ the strong stackprotector if you had AUTO enabled, because in a legacy config file, the sane stack protector configuration would look like CONFIG_HAVE_CC_STACKPROTECTOR=y # CONFIG_CC_STACKPROTECTOR_NONE is not set # CONFIG_CC_STACKPROTECTOR_REGULAR is not set # CONFIG_CC_STACKPROTECTOR_STRONG is not set CONFIG_CC_STACKPROTECTOR_AUTO=y and when you ran this through "make oldconfig" with the Kbuild changes, it would ask you about the regular CONFIG_CC_STACKPROTECTOR (that had been renamed from CONFIG_CC_STACKPROTECTOR_REGULAR to just CONFIG_CC_STACKPROTECTOR), but it would think that the STRONG version used to be disabled (because it was really enabled by AUTO), and would disable it in the new config, resulting in: CONFIG_HAVE_CC_STACKPROTECTOR=y CONFIG_CC_HAS_STACKPROTECTOR_NONE=y CONFIG_CC_STACKPROTECTOR=y # CONFIG_CC_STACKPROTECTOR_STRONG is not set CONFIG_CC_HAS_SANE_STACKPROTECTOR=y That's dangerously subtle - people could suddenly find themselves with the weaker stack protector setup without even realizing. The solution here is to just rename not just the old RECULAR stack protector option, but also the strong one. This does that by just removing the CC_ prefix entirely for the user choices, because it really is not about the compiler support (the compiler support now instead automatially impacts _visibility_ of the options to users). This results in "make oldconfig" actually asking the user for their choice, so that we don't have any silent subtle security model changes. The end result would generally look like this: CONFIG_HAVE_CC_STACKPROTECTOR=y CONFIG_CC_HAS_STACKPROTECTOR_NONE=y CONFIG_STACKPROTECTOR=y CONFIG_STACKPROTECTOR_STRONG=y CONFIG_CC_HAS_SANE_STACKPROTECTOR=y where the "CC_" versions really are about internal compiler infrastructure, not the user selections. Acked-by: Masahiro Yamada Signed-off-by: Linus Torvalds --- include/linux/sched.h | 2 +- include/linux/stackprotector.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 16e4d984fe51..cfb7da88c217 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -742,7 +742,7 @@ struct task_struct { pid_t pid; pid_t tgid; -#ifdef CONFIG_CC_STACKPROTECTOR +#ifdef CONFIG_STACKPROTECTOR /* Canary value for the -fstack-protector GCC feature: */ unsigned long stack_canary; #endif diff --git a/include/linux/stackprotector.h b/include/linux/stackprotector.h index 03696c729fb4..6b792d080eee 100644 --- a/include/linux/stackprotector.h +++ b/include/linux/stackprotector.h @@ -6,7 +6,7 @@ #include #include -#ifdef CONFIG_CC_STACKPROTECTOR +#ifdef CONFIG_STACKPROTECTOR # include #else static inline void boot_init_stack_canary(void) -- cgit v1.2.3 From cf65a0f6f6ff7631ba0ac0513a14ca5b65320d80 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 12 Jun 2018 19:01:45 +0200 Subject: dma-mapping: move all DMA mapping code to kernel/dma Currently the code is split over various files with dma- prefixes in the lib/ and drives/base directories, and the number of files keeps growing. Move them into a single directory to keep the code together and remove the file name prefixes. To match the irq infrastructure this directory is placed under the kernel/ directory. Signed-off-by: Christoph Hellwig --- include/linux/dma-contiguous.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/dma-contiguous.h b/include/linux/dma-contiguous.h index b67bf6ac907d..3c5a4cb3eb95 100644 --- a/include/linux/dma-contiguous.h +++ b/include/linux/dma-contiguous.h @@ -48,7 +48,7 @@ * CMA should not be used by the device drivers directly. It is * only a helper framework for dma-mapping subsystem. * - * For more information, see kernel-docs in drivers/base/dma-contiguous.c + * For more information, see kernel-docs in kernel/dma/contiguous.c */ #ifdef __KERNEL__ -- cgit v1.2.3 From da661267398869a553b7f67d739d360aaa1361b6 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 14 Jun 2018 13:58:45 +0200 Subject: blk-mq: don't time out requests again that are in the timeout handler We can currently call the timeout handler again on a request that has already been handed over to the timeout handler. Prevent that with a new flag. Fixes: 12f5b931 ("blk-mq: Remove generation seqeunce") Reported-by: Andrew Randrianasulu Tested-by: Andrew Randrianasulu Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index bca3a92eb55f..fa6f11751430 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -127,6 +127,8 @@ typedef __u32 __bitwise req_flags_t; #define RQF_ZONE_WRITE_LOCKED ((__force req_flags_t)(1 << 19)) /* already slept for hybrid poll */ #define RQF_MQ_POLL_SLEPT ((__force req_flags_t)(1 << 20)) +/* ->timeout has been called, don't expire again */ +#define RQF_TIMED_OUT ((__force req_flags_t)(1 << 21)) /* flags that prevent us from merging requests: */ #define RQF_NOMERGE_FLAGS \ -- cgit v1.2.3 From e6c3456aa897c9799de5423b28550efad14a51b0 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 14 Jun 2018 14:26:47 +0200 Subject: blk-mq: remove blk_mq_tagset_iter Unused now that nvme stopped using it. Signed-off-by: Christoph Hellwig Reviewed-by: Jens Axboe --- include/linux/blk-mq.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/blk-mq.h b/include/linux/blk-mq.h index fb355173f3c7..e3147eb74222 100644 --- a/include/linux/blk-mq.h +++ b/include/linux/blk-mq.h @@ -281,8 +281,6 @@ void blk_freeze_queue_start(struct request_queue *q); void blk_mq_freeze_queue_wait(struct request_queue *q); int blk_mq_freeze_queue_wait_timeout(struct request_queue *q, unsigned long timeout); -int blk_mq_tagset_iter(struct blk_mq_tag_set *set, void *data, - int (reinit_request)(void *, struct request *)); int blk_mq_map_queues(struct blk_mq_tag_set *set); void blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, int nr_hw_queues); -- cgit v1.2.3 From 92ee383f6daab4da5471b86f6fdaba775e6928f6 Mon Sep 17 00:00:00 2001 From: Shakeel Butt Date: Thu, 14 Jun 2018 15:26:27 -0700 Subject: mm: fix race between kmem_cache destroy, create and deactivate The memcg kmem cache creation and deactivation (SLUB only) is asynchronous. If a root kmem cache is destroyed whose memcg cache is in the process of creation or deactivation, the kernel may crash. Example of one such crash: general protection fault: 0000 [#1] SMP PTI CPU: 1 PID: 1721 Comm: kworker/14:1 Not tainted 4.17.0-smp ... Workqueue: memcg_kmem_cache kmemcg_deactivate_workfn RIP: 0010:has_cpu_slab ... Call Trace: ? on_each_cpu_cond __kmem_cache_shrink kmemcg_cache_deact_after_rcu kmemcg_deactivate_workfn process_one_work worker_thread kthread ret_from_fork+0x35/0x40 To fix this race, on root kmem cache destruction, mark the cache as dying and flush the workqueue used for memcg kmem cache creation and deactivation. SLUB's memcg kmem cache deactivation also includes RCU callback and thus make sure all previous registered RCU callbacks have completed as well. [shakeelb@google.com: handle the RCU callbacks for SLUB deactivation] Link: http://lkml.kernel.org/r/20180611192951.195727-1-shakeelb@google.com [shakeelb@google.com: add more documentation, rename fields for readability] Link: http://lkml.kernel.org/r/20180522201336.196994-1-shakeelb@google.com [akpm@linux-foundation.org: fix build, per Shakeel] [shakeelb@google.com: v3. Instead of refcount, flush the workqueue] Link: http://lkml.kernel.org/r/20180530001204.183758-1-shakeelb@google.com Link: http://lkml.kernel.org/r/20180521174116.171846-1-shakeelb@google.com Signed-off-by: Shakeel Butt Acked-by: Vladimir Davydov Cc: Michal Hocko Cc: Greg Thelen Cc: Christoph Lameter Cc: Pekka Enberg Cc: David Rientjes Cc: Joonsoo Kim Cc: Johannes Weiner Cc: Tejun Heo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/slab.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/slab.h b/include/linux/slab.h index 4d759e1ddc33..14e3fe4bd6a1 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -600,6 +600,7 @@ struct memcg_cache_params { struct memcg_cache_array __rcu *memcg_caches; struct list_head __root_caches_node; struct list_head children; + bool dying; }; struct { struct mem_cgroup *memcg; -- cgit v1.2.3 From 0ed557aa813922f6f32adec69e266532091c895b Mon Sep 17 00:00:00 2001 From: Mark Rutland Date: Thu, 14 Jun 2018 15:27:41 -0700 Subject: sched/core / kcov: avoid kcov_area during task switch During a context switch, we first switch_mm() to the next task's mm, then switch_to() that new task. This means that vmalloc'd regions which had previously been faulted in can transiently disappear in the context of the prev task. Functions instrumented by KCOV may try to access a vmalloc'd kcov_area during this window, and as the fault handling code is instrumented, this results in a recursive fault. We must avoid accessing any kcov_area during this window. We can do so with a new flag in kcov_mode, set prior to switching the mm, and cleared once the new task is live. Since task_struct::kcov_mode isn't always a specific enum kcov_mode value, this is made an unsigned int. The manipulation is hidden behind kcov_{prepare,finish}_switch() helpers, which are empty for !CONFIG_KCOV kernels. The code uses macros because I can't use static inline functions without a circular include dependency between and , since the definition of task_struct uses things defined in Link: http://lkml.kernel.org/r/20180504135535.53744-4-mark.rutland@arm.com Signed-off-by: Mark Rutland Acked-by: Andrey Ryabinin Cc: Dmitry Vyukov Cc: Ingo Molnar Cc: Peter Zijlstra Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kcov.h | 14 ++++++++++++++ include/linux/sched.h | 2 +- 2 files changed, 15 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/kcov.h b/include/linux/kcov.h index 3ecf6f5e3a5f..b76a1807028d 100644 --- a/include/linux/kcov.h +++ b/include/linux/kcov.h @@ -22,13 +22,27 @@ enum kcov_mode { KCOV_MODE_TRACE_CMP = 3, }; +#define KCOV_IN_CTXSW (1 << 30) + void kcov_task_init(struct task_struct *t); void kcov_task_exit(struct task_struct *t); +#define kcov_prepare_switch(t) \ +do { \ + (t)->kcov_mode |= KCOV_IN_CTXSW; \ +} while (0) + +#define kcov_finish_switch(t) \ +do { \ + (t)->kcov_mode &= ~KCOV_IN_CTXSW; \ +} while (0) + #else static inline void kcov_task_init(struct task_struct *t) {} static inline void kcov_task_exit(struct task_struct *t) {} +static inline void kcov_prepare_switch(struct task_struct *t) {} +static inline void kcov_finish_switch(struct task_struct *t) {} #endif /* CONFIG_KCOV */ #endif /* _LINUX_KCOV_H */ diff --git a/include/linux/sched.h b/include/linux/sched.h index cfb7da88c217..87bf02d93a27 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1130,7 +1130,7 @@ struct task_struct { #ifdef CONFIG_KCOV /* Coverage collection mode enabled for this task (0 if disabled): */ - enum kcov_mode kcov_mode; + unsigned int kcov_mode; /* Size of the kcov_area: */ unsigned int kcov_size; -- cgit v1.2.3 From fe6bdfc8e1e131720abbe77a2eb990c94c9024cb Mon Sep 17 00:00:00 2001 From: Roman Gushchin Date: Thu, 14 Jun 2018 15:28:05 -0700 Subject: mm: fix oom_kill event handling Commit e27be240df53 ("mm: memcg: make sure memory.events is uptodate when waking pollers") converted most of memcg event counters to per-memcg atomics, which made them less confusing for a user. The "oom_kill" counter remained untouched, so now it behaves differently than other counters (including "oom"). This adds nothing but confusion. Let's fix this by adding the MEMCG_OOM_KILL event, and follow the MEMCG_OOM approach. This also removes a hack from count_memcg_event_mm(), introduced earlier specially for the OOM_KILL counter. [akpm@linux-foundation.org: fix for droppage of memcg-replace-mm-owner-with-mm-memcg.patch] Link: http://lkml.kernel.org/r/20180508124637.29984-1-guro@fb.com Signed-off-by: Roman Gushchin Acked-by: Konstantin Khlebnikov Acked-by: Johannes Weiner Acked-by: Michal Hocko Cc: Vladimir Davydov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/memcontrol.h | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index 4f52ec755725..6c6fb116e925 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -53,6 +53,7 @@ enum memcg_memory_event { MEMCG_HIGH, MEMCG_MAX, MEMCG_OOM, + MEMCG_OOM_KILL, MEMCG_SWAP_MAX, MEMCG_SWAP_FAIL, MEMCG_NR_MEMORY_EVENTS, @@ -720,11 +721,8 @@ static inline void count_memcg_event_mm(struct mm_struct *mm, rcu_read_lock(); memcg = mem_cgroup_from_task(rcu_dereference(mm->owner)); - if (likely(memcg)) { + if (likely(memcg)) count_memcg_events(memcg, idx, 1); - if (idx == OOM_KILL) - cgroup_file_notify(&memcg->events_file); - } rcu_read_unlock(); } @@ -735,6 +733,21 @@ static inline void memcg_memory_event(struct mem_cgroup *memcg, cgroup_file_notify(&memcg->events_file); } +static inline void memcg_memory_event_mm(struct mm_struct *mm, + enum memcg_memory_event event) +{ + struct mem_cgroup *memcg; + + if (mem_cgroup_disabled()) + return; + + rcu_read_lock(); + memcg = mem_cgroup_from_task(rcu_dereference(mm->owner)); + if (likely(memcg)) + memcg_memory_event(memcg, event); + rcu_read_unlock(); +} + #ifdef CONFIG_TRANSPARENT_HUGEPAGE void mem_cgroup_split_huge_fixup(struct page *head); #endif @@ -756,6 +769,11 @@ static inline void memcg_memory_event(struct mem_cgroup *memcg, { } +static inline void memcg_memory_event_mm(struct mm_struct *mm, + enum memcg_memory_event event) +{ +} + static inline enum mem_cgroup_protection mem_cgroup_protected( struct mem_cgroup *root, struct mem_cgroup *memcg) { -- cgit v1.2.3 From be7f99c536c5aeebad29082b7d8dce32077fea14 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 15 Jun 2018 13:55:07 +0200 Subject: block: remov blk_queue_invalidate_tags This function is entirely unused, so remove it and the tag_queue_busy member of struct request_queue. Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index fa6f11751430..9154570edf29 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -562,7 +562,6 @@ struct request_queue { unsigned int dma_alignment; struct blk_queue_tag *queue_tags; - struct list_head tag_busy_list; unsigned int nr_sorted; unsigned int in_flight[2]; @@ -1375,7 +1374,6 @@ extern void blk_queue_end_tag(struct request_queue *, struct request *); extern int blk_queue_init_tags(struct request_queue *, int, struct blk_queue_tag *, int); extern void blk_queue_free_tags(struct request_queue *); extern int blk_queue_resize_tags(struct request_queue *, int); -extern void blk_queue_invalidate_tags(struct request_queue *); extern struct blk_queue_tag *blk_init_tags(int, int); extern void blk_free_tags(struct blk_queue_tag *); -- cgit v1.2.3 From 0da0b7fd73e4f20e1a987dfade0b36bb4813cf10 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 15 Jun 2018 15:19:22 +0100 Subject: afs: Display manually added cells in dynamic root mount Alter the dynroot mount so that cells created by manipulation of /proc/fs/afs/cells and /proc/fs/afs/rootcell and by specification of a root cell as a module parameter will cause directories for those cells to be created in the dynamic root superblock for the network namespace[*]. To this end: (1) Only one dynamic root superblock is now created per network namespace and this is shared between all attempts to mount it. This makes it easier to find the superblock to modify. (2) When a dynamic root superblock is created, the list of cells is walked and directories created for each cell already defined. (3) When a new cell is added, if a dynamic root superblock exists, a directory is created for it. (4) When a cell is destroyed, the directory is removed. (5) These directories are created by calling lookup_one_len() on the root dir which automatically creates them if they don't exist. [*] Inasmuch as network namespaces are currently supported here. Signed-off-by: David Howells --- include/linux/namei.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/namei.h b/include/linux/namei.h index a982bb7cd480..a78606e8e3df 100644 --- a/include/linux/namei.h +++ b/include/linux/namei.h @@ -81,6 +81,7 @@ extern void done_path_create(struct path *, struct dentry *); extern struct dentry *kern_path_locked(const char *, struct path *); extern int kern_path_mountpoint(int, const char *, struct path *, unsigned int); +extern struct dentry *try_lookup_one_len(const char *, struct dentry *, int); extern struct dentry *lookup_one_len(const char *, struct dentry *, int); extern struct dentry *lookup_one_len_unlocked(const char *, struct dentry *, int); -- cgit v1.2.3 From 7d1982b4e335c1b184406b7566f6041bfe313c35 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Fri, 15 Jun 2018 02:30:47 +0200 Subject: bpf: fix panic in prog load calls cleanup While testing I found that when hitting error path in bpf_prog_load() where we jump to free_used_maps and prog contained BPF to BPF calls that were JITed earlier, then we never clean up the bpf_prog_kallsyms_add() done under jit_subprogs(). Add proper API to make BPF kallsyms deletion more clear and fix that. Fixes: 1c2a088a6626 ("bpf: x64: add JIT support for multi-function programs") Signed-off-by: Daniel Borkmann Acked-by: Martin KaFai Lau Signed-off-by: Alexei Starovoitov --- include/linux/filter.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/filter.h b/include/linux/filter.h index 45fc0f5000d8..297c56fa9cee 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -961,6 +961,9 @@ static inline void bpf_prog_kallsyms_del(struct bpf_prog *fp) } #endif /* CONFIG_BPF_JIT */ +void bpf_prog_kallsyms_del_subprogs(struct bpf_prog *fp); +void bpf_prog_kallsyms_del_all(struct bpf_prog *fp); + #define BPF_ANC BIT(15) static inline bool bpf_needs_clear_a(const struct sock_filter *first) -- cgit v1.2.3 From 9facc336876f7ecf9edba4c67b90426fde4ec898 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Fri, 15 Jun 2018 02:30:48 +0200 Subject: bpf: reject any prog that failed read-only lock We currently lock any JITed image as read-only via bpf_jit_binary_lock_ro() as well as the BPF image as read-only through bpf_prog_lock_ro(). In the case any of these would fail we throw a WARN_ON_ONCE() in order to yell loudly to the log. Perhaps, to some extend, this may be comparable to an allocation where __GFP_NOWARN is explicitly not set. Added via 65869a47f348 ("bpf: improve read-only handling"), this behavior is slightly different compared to any of the other in-kernel set_memory_ro() users who do not check the return code of set_memory_ro() and friends /at all/ (e.g. in the case of module_enable_ro() / module_disable_ro()). Given in BPF this is mandatory hardening step, we want to know whether there are any issues that would leave both BPF data writable. So it happens that syzkaller enabled fault injection and it triggered memory allocation failure deep inside x86's change_page_attr_set_clr() which was triggered from set_memory_ro(). Now, there are two options: i) leaving everything as is, and ii) reworking the image locking code in order to have a final checkpoint out of the central bpf_prog_select_runtime() which probes whether any of the calls during prog setup weren't successful, and then bailing out with an error. Option ii) is a better approach since this additional paranoia avoids altogether leaving any potential W+X pages from BPF side in the system. Therefore, lets be strict about it, and reject programs in such unlikely occasion. While testing I noticed also that one bpf_prog_lock_ro() call was missing on the outer dummy prog in case of calls, e.g. in the destructor we call bpf_prog_free_deferred() on the main prog where we try to bpf_prog_unlock_free() the program, and since we go via bpf_prog_select_runtime() do that as well. Reported-by: syzbot+3b889862e65a98317058@syzkaller.appspotmail.com Reported-by: syzbot+9e762b52dd17e616a7a5@syzkaller.appspotmail.com Signed-off-by: Daniel Borkmann Acked-by: Martin KaFai Lau Signed-off-by: Alexei Starovoitov --- include/linux/filter.h | 60 ++++++++++++++++++++++++++++++++------------------ 1 file changed, 38 insertions(+), 22 deletions(-) (limited to 'include/linux') diff --git a/include/linux/filter.h b/include/linux/filter.h index 297c56fa9cee..108f9812e196 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -469,7 +469,8 @@ struct sock_fprog_kern { }; struct bpf_binary_header { - unsigned int pages; + u16 pages; + u16 locked:1; u8 image[]; }; @@ -671,15 +672,18 @@ bpf_ctx_narrow_access_ok(u32 off, u32 size, u32 size_default) #define bpf_classic_proglen(fprog) (fprog->len * sizeof(fprog->filter[0])) -#ifdef CONFIG_ARCH_HAS_SET_MEMORY static inline void bpf_prog_lock_ro(struct bpf_prog *fp) { +#ifdef CONFIG_ARCH_HAS_SET_MEMORY fp->locked = 1; - WARN_ON_ONCE(set_memory_ro((unsigned long)fp, fp->pages)); + if (set_memory_ro((unsigned long)fp, fp->pages)) + fp->locked = 0; +#endif } static inline void bpf_prog_unlock_ro(struct bpf_prog *fp) { +#ifdef CONFIG_ARCH_HAS_SET_MEMORY if (fp->locked) { WARN_ON_ONCE(set_memory_rw((unsigned long)fp, fp->pages)); /* In case set_memory_rw() fails, we want to be the first @@ -687,34 +691,30 @@ static inline void bpf_prog_unlock_ro(struct bpf_prog *fp) */ fp->locked = 0; } +#endif } static inline void bpf_jit_binary_lock_ro(struct bpf_binary_header *hdr) { - WARN_ON_ONCE(set_memory_ro((unsigned long)hdr, hdr->pages)); -} - -static inline void bpf_jit_binary_unlock_ro(struct bpf_binary_header *hdr) -{ - WARN_ON_ONCE(set_memory_rw((unsigned long)hdr, hdr->pages)); -} -#else -static inline void bpf_prog_lock_ro(struct bpf_prog *fp) -{ -} - -static inline void bpf_prog_unlock_ro(struct bpf_prog *fp) -{ -} - -static inline void bpf_jit_binary_lock_ro(struct bpf_binary_header *hdr) -{ +#ifdef CONFIG_ARCH_HAS_SET_MEMORY + hdr->locked = 1; + if (set_memory_ro((unsigned long)hdr, hdr->pages)) + hdr->locked = 0; +#endif } static inline void bpf_jit_binary_unlock_ro(struct bpf_binary_header *hdr) { +#ifdef CONFIG_ARCH_HAS_SET_MEMORY + if (hdr->locked) { + WARN_ON_ONCE(set_memory_rw((unsigned long)hdr, hdr->pages)); + /* In case set_memory_rw() fails, we want to be the first + * to crash here instead of some random place later on. + */ + hdr->locked = 0; + } +#endif } -#endif /* CONFIG_ARCH_HAS_SET_MEMORY */ static inline struct bpf_binary_header * bpf_jit_binary_hdr(const struct bpf_prog *fp) @@ -725,6 +725,22 @@ bpf_jit_binary_hdr(const struct bpf_prog *fp) return (void *)addr; } +#ifdef CONFIG_ARCH_HAS_SET_MEMORY +static inline int bpf_prog_check_pages_ro_single(const struct bpf_prog *fp) +{ + if (!fp->locked) + return -ENOLCK; + if (fp->jited) { + const struct bpf_binary_header *hdr = bpf_jit_binary_hdr(fp); + + if (!hdr->locked) + return -ENOLCK; + } + + return 0; +} +#endif + int sk_filter_trim_cap(struct sock *sk, struct sk_buff *skb, unsigned int cap); static inline int sk_filter(struct sock *sk, struct sk_buff *skb) { -- cgit v1.2.3 From ec15872daa0ac3f5cbe7cb6f1734c493d74301ac Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 8 May 2018 18:54:36 -0300 Subject: docs: fix broken references with multiple hints The script: ./scripts/documentation-file-ref-check --fix Gives multiple hints for broken references on some files. Manually use the one that applies for some files. Acked-by: Steven Rostedt (VMware) Acked-by: James Morris Signed-off-by: Mauro Carvalho Chehab Acked-by: Jonathan Corbet --- include/linux/tracepoint.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h index c94f466d57ef..19a690b559ca 100644 --- a/include/linux/tracepoint.h +++ b/include/linux/tracepoint.h @@ -4,7 +4,7 @@ /* * Kernel Tracepoint API. * - * See Documentation/trace/tracepoints.txt. + * See Documentation/trace/tracepoints.rst. * * Copyright (C) 2008-2014 Mathieu Desnoyers * -- cgit v1.2.3 From 5fb94e9ca333f0fe1d96de06704a79942b3832c3 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 8 May 2018 15:14:57 -0300 Subject: docs: Fix some broken references As we move stuff around, some doc references are broken. Fix some of them via this script: ./scripts/documentation-file-ref-check --fix Manually checked if the produced result is valid, removing a few false-positives. Acked-by: Takashi Iwai Acked-by: Masami Hiramatsu Acked-by: Stephen Boyd Acked-by: Charles Keepax Acked-by: Mathieu Poirier Reviewed-by: Coly Li Signed-off-by: Mauro Carvalho Chehab Acked-by: Jonathan Corbet --- include/linux/assoc_array.h | 2 +- include/linux/assoc_array_priv.h | 2 +- include/linux/circ_buf.h | 2 +- include/linux/ftrace.h | 2 +- include/linux/rculist_nulls.h | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/assoc_array.h b/include/linux/assoc_array.h index a89df3be1686..65e3832f96b2 100644 --- a/include/linux/assoc_array.h +++ b/include/linux/assoc_array.h @@ -1,6 +1,6 @@ /* Generic associative array implementation. * - * See Documentation/assoc_array.txt for information. + * See Documentation/core-api/assoc_array.rst for information. * * Copyright (C) 2013 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) diff --git a/include/linux/assoc_array_priv.h b/include/linux/assoc_array_priv.h index 711275e6681c..a00a06550c10 100644 --- a/include/linux/assoc_array_priv.h +++ b/include/linux/assoc_array_priv.h @@ -1,6 +1,6 @@ /* Private definitions for the generic associative array implementation. * - * See Documentation/assoc_array.txt for information. + * See Documentation/core-api/assoc_array.rst for information. * * Copyright (C) 2013 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) diff --git a/include/linux/circ_buf.h b/include/linux/circ_buf.h index 7cf262a421c3..b3233e8202f9 100644 --- a/include/linux/circ_buf.h +++ b/include/linux/circ_buf.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* - * See Documentation/circular-buffers.txt for more information. + * See Documentation/core-api/circular-buffers.rst for more information. */ #ifndef _LINUX_CIRC_BUF_H diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index 9c3c9a319e48..8154f4920fcb 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -1,7 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* * Ftrace header. For implementation details beyond the random comments - * scattered below, see: Documentation/trace/ftrace-design.txt + * scattered below, see: Documentation/trace/ftrace-design.rst */ #ifndef _LINUX_FTRACE_H diff --git a/include/linux/rculist_nulls.h b/include/linux/rculist_nulls.h index e4b257ff881b..bc8206a8f30e 100644 --- a/include/linux/rculist_nulls.h +++ b/include/linux/rculist_nulls.h @@ -109,7 +109,7 @@ static inline void hlist_nulls_add_head_rcu(struct hlist_nulls_node *n, * * The barrier() is needed to make sure compiler doesn't cache first element [1], * as this loop can be restarted [2] - * [1] Documentation/atomic_ops.txt around line 114 + * [1] Documentation/core-api/atomic_ops.rst around line 114 * [2] Documentation/RCU/rculist_nulls.txt around line 146 */ #define hlist_nulls_for_each_entry_rcu(tpos, pos, head, member) \ -- cgit v1.2.3 From 44348e8ac145d78171c5a6f4a8bdb01b70969fc2 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 14 Jun 2018 12:34:32 -0300 Subject: fix a series of Documentation/ broken file name references As files move around, their previous links break. Fix the references for them. Acked-by: Andy Shevchenko Signed-off-by: Mauro Carvalho Chehab Acked-by: Jonathan Corbet --- include/linux/platform_data/sc18is602.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/platform_data/sc18is602.h b/include/linux/platform_data/sc18is602.h index 997b06634152..18602cab7799 100644 --- a/include/linux/platform_data/sc18is602.h +++ b/include/linux/platform_data/sc18is602.h @@ -7,7 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * For further information, see the Documentation/spi/sc18is602 file. + * For further information, see the Documentation/spi/spi-sc18is602 file. */ /** -- cgit v1.2.3 From 6d5fc1957989266006db6ef3dfb9159b42cf0189 Mon Sep 17 00:00:00 2001 From: Toshiaki Makita Date: Thu, 14 Jun 2018 11:07:42 +0900 Subject: xdp: Fix handling of devmap in generic XDP Commit 67f29e07e131 ("bpf: devmap introduce dev_map_enqueue") changed the return value type of __devmap_lookup_elem() from struct net_device * to struct bpf_dtab_netdev * but forgot to modify generic XDP code accordingly. Thus generic XDP incorrectly used struct bpf_dtab_netdev where struct net_device is expected, then skb->dev was set to invalid value. v2: - Fix compiler warning without CONFIG_BPF_SYSCALL. Fixes: 67f29e07e131 ("bpf: devmap introduce dev_map_enqueue") Signed-off-by: Toshiaki Makita Acked-by: Yonghong Song Acked-by: Jesper Dangaard Brouer Signed-off-by: Daniel Borkmann --- include/linux/bpf.h | 12 ++++++++++++ include/linux/filter.h | 16 ++++++++++++++++ 2 files changed, 28 insertions(+) (limited to 'include/linux') diff --git a/include/linux/bpf.h b/include/linux/bpf.h index 995c3b1e59bf..7df32a3200f7 100644 --- a/include/linux/bpf.h +++ b/include/linux/bpf.h @@ -488,12 +488,15 @@ void bpf_patch_call_args(struct bpf_insn *insn, u32 stack_depth); /* Map specifics */ struct xdp_buff; +struct sk_buff; struct bpf_dtab_netdev *__dev_map_lookup_elem(struct bpf_map *map, u32 key); void __dev_map_insert_ctx(struct bpf_map *map, u32 index); void __dev_map_flush(struct bpf_map *map); int dev_map_enqueue(struct bpf_dtab_netdev *dst, struct xdp_buff *xdp, struct net_device *dev_rx); +int dev_map_generic_redirect(struct bpf_dtab_netdev *dst, struct sk_buff *skb, + struct bpf_prog *xdp_prog); struct bpf_cpu_map_entry *__cpu_map_lookup_elem(struct bpf_map *map, u32 key); void __cpu_map_insert_ctx(struct bpf_map *map, u32 index); @@ -586,6 +589,15 @@ int dev_map_enqueue(struct bpf_dtab_netdev *dst, struct xdp_buff *xdp, return 0; } +struct sk_buff; + +static inline int dev_map_generic_redirect(struct bpf_dtab_netdev *dst, + struct sk_buff *skb, + struct bpf_prog *xdp_prog) +{ + return 0; +} + static inline struct bpf_cpu_map_entry *__cpu_map_lookup_elem(struct bpf_map *map, u32 key) { diff --git a/include/linux/filter.h b/include/linux/filter.h index 108f9812e196..b615df57b7d5 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -19,6 +19,7 @@ #include #include #include +#include #include @@ -802,6 +803,21 @@ static inline bool bpf_dump_raw_ok(void) struct bpf_prog *bpf_patch_insn_single(struct bpf_prog *prog, u32 off, const struct bpf_insn *patch, u32 len); +static inline int __xdp_generic_ok_fwd_dev(struct sk_buff *skb, + struct net_device *fwd) +{ + unsigned int len; + + if (unlikely(!(fwd->flags & IFF_UP))) + return -ENETDOWN; + + len = fwd->mtu + fwd->hard_header_len + VLAN_HLEN; + if (skb->len > len) + return -EMSGSIZE; + + return 0; +} + /* The pair of xdp_do_redirect and xdp_do_flush_map MUST be called in the * same cpu context. Further for best results no more than a single map * for the do_redirect/do_flush pair should be used. This limitation is -- cgit v1.2.3 From 9bbe60a67be5a1c6f79b3c9be5003481a50529ff Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sat, 16 Jun 2018 11:55:44 +0100 Subject: atm: Preserve value of skb->truesize when accounting to vcc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit ATM accounts for in-flight TX packets in sk_wmem_alloc of the VCC on which they are to be sent. But it doesn't take ownership of those packets from the sock (if any) which originally owned them. They should remain owned by their actual sender until they've left the box. There's a hack in pskb_expand_head() to avoid adjusting skb->truesize for certain skbs, precisely to avoid messing up sk_wmem_alloc accounting. Ideally that hack would cover the ATM use case too, but it doesn't — skbs which aren't owned by any sock, for example PPP control frames, still get their truesize adjusted when the low-level ATM driver adds headroom. This has always been an issue, it seems. The truesize of a packet increases, and sk_wmem_alloc on the VCC goes negative. But this wasn't for normal traffic, only for control frames. So I think we just got away with it, and we probably needed to send 2GiB of LCP echo frames before the misaccounting would ever have caused a problem and caused atm_may_send() to start refusing packets. Commit 14afee4b609 ("net: convert sock.sk_wmem_alloc from atomic_t to refcount_t") did exactly what it was intended to do, and turned this mostly-theoretical problem into a real one, causing PPPoATM to fail immediately as sk_wmem_alloc underflows and atm_may_send() *immediately* starts refusing to allow new packets. The least intrusive solution to this problem is to stash the value of skb->truesize that was accounted to the VCC, in a new member of the ATM_SKB(skb) structure. Then in atm_pop_raw() subtract precisely that value instead of the then-current value of skb->truesize. Fixes: 158f323b9868 ("net: adjust skb->truesize in pskb_expand_head()") Signed-off-by: David Woodhouse Tested-by: Kevin Darbyshire-Bryant Signed-off-by: David S. Miller --- include/linux/atmdev.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'include/linux') diff --git a/include/linux/atmdev.h b/include/linux/atmdev.h index 0c27515d2cf6..8124815eb121 100644 --- a/include/linux/atmdev.h +++ b/include/linux/atmdev.h @@ -214,6 +214,7 @@ struct atmphy_ops { struct atm_skb_data { struct atm_vcc *vcc; /* ATM VCC */ unsigned long atm_options; /* ATM layer options */ + unsigned int acct_truesize; /* truesize accounted to vcc */ }; #define VCC_HTABLE_SIZE 32 @@ -241,6 +242,20 @@ void vcc_insert_socket(struct sock *sk); void atm_dev_release_vccs(struct atm_dev *dev); +static inline void atm_account_tx(struct atm_vcc *vcc, struct sk_buff *skb) +{ + /* + * Because ATM skbs may not belong to a sock (and we don't + * necessarily want to), skb->truesize may be adjusted, + * escaping the hack in pskb_expand_head() which avoids + * doing so for some cases. So stash the value of truesize + * at the time we accounted it, and atm_pop_raw() can use + * that value later, in case it changes. + */ + refcount_add(skb->truesize, &sk_atm(vcc)->sk_wmem_alloc); + ATM_SKB(skb)->acct_truesize = skb->truesize; + ATM_SKB(skb)->atm_options = vcc->atm_options; +} static inline void atm_force_charge(struct atm_vcc *vcc,int truesize) { -- cgit v1.2.3 From b23908d3c48a37c46c6a26df2cdeab1610b360ba Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Sun, 17 Jun 2018 14:09:42 +0200 Subject: firmware: dmi: Add access to the SKU ID string This is used in some systems from user space for determining the identity of the device. Expose this as a file so that that user-space tools don't need to read from /sys/firmware/dmi/tables/DMI Signed-off-by: Simon Glass Signed-off-by: Jean Delvare --- include/linux/mod_devicetable.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index 7d361be2e24f..61fbfbc03e5b 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -490,6 +490,7 @@ enum dmi_field { DMI_PRODUCT_VERSION, DMI_PRODUCT_SERIAL, DMI_PRODUCT_UUID, + DMI_PRODUCT_SKU, DMI_PRODUCT_FAMILY, DMI_BOARD_VENDOR, DMI_BOARD_NAME, -- cgit v1.2.3 From 42f86b44a4d356edba626171dfe0be061fc695af Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 18 Jun 2018 19:07:24 -0400 Subject: pNFS/flexfiles: Don't tie up all the rpciod threads in resends We do not want to have rpciod threads perform recursive calls into the RPC layer since that can deadlock. In particular, having to wait for a layoutget can be nasty... We want rather to defer scheduling those retries until we're in the rpc_release() callback, since that is called from the nfsiod workqueue. Signed-off-by: Trond Myklebust --- include/linux/nfs_xdr.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index 9dee3c23895d..712eed156d09 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -1438,6 +1438,8 @@ enum { NFS_IOHDR_EOF, NFS_IOHDR_REDO, NFS_IOHDR_STAT, + NFS_IOHDR_RESEND_PNFS, + NFS_IOHDR_RESEND_MDS, }; struct nfs_io_completion; -- cgit v1.2.3 From 9262478220eac908ae6e168c3df2c453c87e2da3 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 20 Jun 2018 17:24:09 -0700 Subject: bpf: enforce correct alignment for instructions After commit 9facc336876f ("bpf: reject any prog that failed read-only lock") offsetof(struct bpf_binary_header, image) became 3 instead of 4, breaking powerpc BPF badly, since instructions need to be word aligned. Fixes: 9facc336876f ("bpf: reject any prog that failed read-only lock") Signed-off-by: Eric Dumazet Cc: Daniel Borkmann Cc: Martin KaFai Lau Cc: Alexei Starovoitov Signed-off-by: David S. Miller --- include/linux/filter.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/filter.h b/include/linux/filter.h index b615df57b7d5..20f2659dd829 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -472,7 +472,9 @@ struct sock_fprog_kern { struct bpf_binary_header { u16 pages; u16 locked:1; - u8 image[]; + + /* Some arches need word alignment for their instructions */ + u8 image[] __aligned(4); }; struct bpf_prog { -- cgit v1.2.3 From 9a789fcfe8605417f7a1a970355f5efa4fe88c64 Mon Sep 17 00:00:00 2001 From: Mathieu Desnoyers Date: Tue, 19 Jun 2018 09:32:30 -0400 Subject: rseq/cleanup: Do not abort rseq c.s. in child on fork() Considering that we explicitly forbid system calls in rseq critical sections, it is not valid to issue a fork or clone system call within a rseq critical section, so rseq_fork() is not required to restart an active rseq c.s. in the child process. Signed-off-by: Mathieu Desnoyers Cc: Andrew Morton Cc: Andy Lutomirski Cc: Ben Maurer Cc: Boqun Feng Cc: Catalin Marinas Cc: Chris Lameter Cc: Dave Watson Cc: Joel Fernandes Cc: Josh Triplett Cc: Linus Torvalds Cc: Michael Kerrisk Cc: Paul E . McKenney Cc: Paul Turner Cc: Peter Zijlstra Cc: Russell King Cc: Shuah Khan Cc: Steven Rostedt Cc: Thomas Gleixner Cc: Will Deacon Cc: linux-api@vger.kernel.org Cc: linux-kselftest@vger.kernel.org Link: https://lore.kernel.org/lkml/20180619133230.4087-4-mathieu.desnoyers@efficios.com Signed-off-by: Ingo Molnar --- include/linux/sched.h | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 87bf02d93a27..c1882643d455 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1831,9 +1831,7 @@ static inline void rseq_migrate(struct task_struct *t) /* * If parent process has a registered restartable sequences area, the - * child inherits. Only applies when forking a process, not a thread. In - * case a parent fork() in the middle of a restartable sequence, set the - * resume notifier to force the child to retry. + * child inherits. Only applies when forking a process, not a thread. */ static inline void rseq_fork(struct task_struct *t, unsigned long clone_flags) { @@ -1847,7 +1845,6 @@ static inline void rseq_fork(struct task_struct *t, unsigned long clone_flags) t->rseq_len = current->rseq_len; t->rseq_sig = current->rseq_sig; t->rseq_event_mask = current->rseq_event_mask; - rseq_preempt(t); } } -- cgit v1.2.3 From f642fb5864a6e3645edce6f85ffe7b44d5e9b990 Mon Sep 17 00:00:00 2001 From: "mike.travis@hpe.com" Date: Thu, 24 May 2018 15:17:12 -0500 Subject: x86/platform/UV: Add adjustable set memory block size function Add a new function to "adjust" the current fixed UV memory block size of 2GB so it can be changed to a different physical boundary. This is out of necessity so arch dependent code can accommodate specific BIOS requirements which can align these new PMEM modules at less than the default boundaries. A "set order" type of function was used to insure that the memory block size will be a power of two value without requiring a validity check. 64GB was chosen as the upper limit for memory block size values to accommodate upcoming 4PB systems which have 6 more bits of physical address space (46 becoming 52). Signed-off-by: Mike Travis Reviewed-by: Andrew Banman Cc: Andrew Morton Cc: Dimitri Sivanich Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Russ Anderson Cc: Thomas Gleixner Cc: dan.j.williams@intel.com Cc: jgross@suse.com Cc: kirill.shutemov@linux.intel.com Cc: mhocko@suse.com Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/lkml/20180524201711.609546602@stormcage.americas.sgi.com Signed-off-by: Ingo Molnar --- include/linux/memory.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/memory.h b/include/linux/memory.h index 31ca3e28b0eb..a6ddefc60517 100644 --- a/include/linux/memory.h +++ b/include/linux/memory.h @@ -38,6 +38,7 @@ struct memory_block { int arch_get_memory_phys_device(unsigned long start_pfn); unsigned long memory_block_size_bytes(void); +int set_memory_block_size_order(unsigned int order); /* These states are exposed to userspace as text strings in sysfs */ #define MEM_ONLINE (1<<0) /* exposed to userspace */ -- cgit v1.2.3 From 8730662d7b2582f65dd6c59ab1e0b7fa461c79b0 Mon Sep 17 00:00:00 2001 From: Wei Wang Date: Tue, 24 Apr 2018 14:22:38 -0700 Subject: kernel.h: Fix a typo in comment Signed-off-by: Wei Wang Cc: Andrew Morton Cc: Borislav Petkov Cc: Crt Mori Cc: Josh Poimboeuf Cc: Kees Cook Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Randy Dunlap Cc: Steven Rostedt Cc: Thomas Gleixner Cc: gregkh@linuxfoundation.org Cc: wei.vince.wang@gmail.com Link: https://lkml.kernel.org/lkml/20180424212241.16013-1-wvw@google.com Signed-off-by: Ingo Molnar --- include/linux/kernel.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/kernel.h b/include/linux/kernel.h index d23123238534..941dc0a5a877 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -666,7 +666,7 @@ do { \ * your code. (Extra memory is used for special buffers that are * allocated when trace_printk() is used.) * - * A little optization trick is done here. If there's only one + * A little optimization trick is done here. If there's only one * argument, there's no need to scan the string for printf formats. * The trace_puts() will suffice. But how can we take advantage of * using trace_puts() when trace_printk() has only one argument? -- cgit v1.2.3 From 72a8edc2d9134c2895eac2fec5eecf8230a05c96 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Fri, 22 Jun 2018 10:52:48 +0100 Subject: genirq/debugfs: Add missing IRQCHIP_SUPPORTS_LEVEL_MSI debug Debug is missing the IRQCHIP_SUPPORTS_LEVEL_MSI debug entry, making debugfs slightly less useful. Take this opportunity to also add a missing comment in the definition of IRQCHIP_SUPPORTS_LEVEL_MSI. Fixes: 6988e0e0d283 ("genirq/msi: Limit level-triggered MSI to platform devices") Signed-off-by: Marc Zyngier Signed-off-by: Thomas Gleixner Cc: Jason Cooper Cc: Alexandre Belloni Cc: Yang Yingliang Cc: Sumit Garg Link: https://lkml.kernel.org/r/20180622095254.5906-2-marc.zyngier@arm.com --- include/linux/irq.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/irq.h b/include/linux/irq.h index 4bd2f34947f4..201de12a9957 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -503,6 +503,7 @@ struct irq_chip { * IRQCHIP_SKIP_SET_WAKE: Skip chip.irq_set_wake(), for this irq chip * IRQCHIP_ONESHOT_SAFE: One shot does not require mask/unmask * IRQCHIP_EOI_THREADED: Chip requires eoi() on unmask in threaded mode + * IRQCHIP_SUPPORTS_LEVEL_MSI Chip can provide two doorbells for Level MSIs */ enum { IRQCHIP_SET_TYPE_MASKED = (1 << 0), -- cgit v1.2.3 From bed9df97b39e73a4607189f2c4b9fb89cc3f7f59 Mon Sep 17 00:00:00 2001 From: John Garry Date: Fri, 22 Jun 2018 19:35:33 +0800 Subject: irqdesc: Delete irq_desc_get_msi_desc() Function irq_desc_get_msi_desc() is not referenced in the kernel (and does not seem to have been referenced since e39758e0ea76, 3 years ago), so delete it. Signed-off-by: John Garry Signed-off-by: Thomas Gleixner Cc: Cc: Cc: Cc: Cc: Cc: Link: https://lkml.kernel.org/r/1529667333-92959-1-git-send-email-john.garry@huawei.com --- include/linux/irqdesc.h | 5 ----- 1 file changed, 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/irqdesc.h b/include/linux/irqdesc.h index 25b33b664537..dd1e40ddac7d 100644 --- a/include/linux/irqdesc.h +++ b/include/linux/irqdesc.h @@ -145,11 +145,6 @@ static inline void *irq_desc_get_handler_data(struct irq_desc *desc) return desc->irq_common_data.handler_data; } -static inline struct msi_desc *irq_desc_get_msi_desc(struct irq_desc *desc) -{ - return desc->irq_common_data.msi_desc; -} - /* * Architectures call this to let the generic IRQ layer * handle an interrupt. -- cgit v1.2.3 From 784e0300fe9fe4aa81bd7df9d59e138f56bb605b Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 22 Jun 2018 11:45:07 +0100 Subject: rseq: Avoid infinite recursion when delivering SIGSEGV When delivering a signal to a task that is using rseq, we call into __rseq_handle_notify_resume() so that the registers pushed in the sigframe are updated to reflect the state of the restartable sequence (for example, ensuring that the signal returns to the abort handler if necessary). However, if the rseq management fails due to an unrecoverable fault when accessing userspace or certain combinations of RSEQ_CS_* flags, then we will attempt to deliver a SIGSEGV. This has the potential for infinite recursion if the rseq code continuously fails on signal delivery. Avoid this problem by using force_sigsegv() instead of force_sig(), which is explicitly designed to reset the SEGV handler to SIG_DFL in the case of a recursive fault. In doing so, remove rseq_signal_deliver() from the internal rseq API and have an optional struct ksignal * parameter to rseq_handle_notify_resume() instead. Signed-off-by: Will Deacon Signed-off-by: Thomas Gleixner Acked-by: Mathieu Desnoyers Cc: peterz@infradead.org Cc: paulmck@linux.vnet.ibm.com Cc: boqun.feng@gmail.com Link: https://lkml.kernel.org/r/1529664307-983-1-git-send-email-will.deacon@arm.com --- include/linux/sched.h | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index c1882643d455..9256118bd40c 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1799,20 +1799,22 @@ static inline void rseq_set_notify_resume(struct task_struct *t) set_tsk_thread_flag(t, TIF_NOTIFY_RESUME); } -void __rseq_handle_notify_resume(struct pt_regs *regs); +void __rseq_handle_notify_resume(struct ksignal *sig, struct pt_regs *regs); -static inline void rseq_handle_notify_resume(struct pt_regs *regs) +static inline void rseq_handle_notify_resume(struct ksignal *ksig, + struct pt_regs *regs) { if (current->rseq) - __rseq_handle_notify_resume(regs); + __rseq_handle_notify_resume(ksig, regs); } -static inline void rseq_signal_deliver(struct pt_regs *regs) +static inline void rseq_signal_deliver(struct ksignal *ksig, + struct pt_regs *regs) { preempt_disable(); __set_bit(RSEQ_EVENT_SIGNAL_BIT, ¤t->rseq_event_mask); preempt_enable(); - rseq_handle_notify_resume(regs); + rseq_handle_notify_resume(ksig, regs); } /* rseq_preempt() requires preemption to be disabled. */ @@ -1861,10 +1863,12 @@ static inline void rseq_execve(struct task_struct *t) static inline void rseq_set_notify_resume(struct task_struct *t) { } -static inline void rseq_handle_notify_resume(struct pt_regs *regs) +static inline void rseq_handle_notify_resume(struct ksignal *ksig, + struct pt_regs *regs) { } -static inline void rseq_signal_deliver(struct pt_regs *regs) +static inline void rseq_signal_deliver(struct ksignal *ksig, + struct pt_regs *regs) { } static inline void rseq_preempt(struct task_struct *t) -- cgit v1.2.3 From 3ee7e8697d5860b173132606d80a9cd35e7113ee Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 18 Jun 2018 15:46:58 +0200 Subject: bdi: Fix another oops in wb_workfn() syzbot is reporting NULL pointer dereference at wb_workfn() [1] due to wb->bdi->dev being NULL. And Dmitry confirmed that wb->state was WB_shutting_down after wb->bdi->dev became NULL. This indicates that unregister_bdi() failed to call wb_shutdown() on one of wb objects. The problem is in cgwb_bdi_unregister() which does cgwb_kill() and thus drops bdi's reference to wb structures before going through the list of wbs again and calling wb_shutdown() on each of them. This way the loop iterating through all wbs can easily miss a wb if that wb has already passed through cgwb_remove_from_bdi_list() called from wb_shutdown() from cgwb_release_workfn() and as a result fully shutdown bdi although wb_workfn() for this wb structure is still running. In fact there are also other ways cgwb_bdi_unregister() can race with cgwb_release_workfn() leading e.g. to use-after-free issues: CPU1 CPU2 cgwb_bdi_unregister() cgwb_kill(*slot); cgwb_release() queue_work(cgwb_release_wq, &wb->release_work); cgwb_release_workfn() wb = list_first_entry(&bdi->wb_list, ...) spin_unlock_irq(&cgwb_lock); wb_shutdown(wb); ... kfree_rcu(wb, rcu); wb_shutdown(wb); -> oops use-after-free We solve these issues by synchronizing writeback structure shutdown from cgwb_bdi_unregister() with cgwb_release_workfn() using a new mutex. That way we also no longer need synchronization using WB_shutting_down as the mutex provides it for CONFIG_CGROUP_WRITEBACK case and without CONFIG_CGROUP_WRITEBACK wb_shutdown() can be called only once from bdi_unregister(). Reported-by: syzbot Acked-by: Tejun Heo Signed-off-by: Jan Kara Signed-off-by: Jens Axboe --- include/linux/backing-dev-defs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/backing-dev-defs.h b/include/linux/backing-dev-defs.h index 0bd432a4d7bd..24251762c20c 100644 --- a/include/linux/backing-dev-defs.h +++ b/include/linux/backing-dev-defs.h @@ -22,7 +22,6 @@ struct dentry; */ enum wb_state { WB_registered, /* bdi_register() was done */ - WB_shutting_down, /* wb_shutdown() in progress */ WB_writeback_running, /* Writeback is in progress */ WB_has_dirty_io, /* Dirty inodes on ->b_{dirty|io|more_io} */ WB_start_all, /* nr_pages == 0 (all) work pending */ @@ -189,6 +188,7 @@ struct backing_dev_info { #ifdef CONFIG_CGROUP_WRITEBACK struct radix_tree_root cgwb_tree; /* radix tree of active cgroup wbs */ struct rb_root cgwb_congested_tree; /* their congested states */ + struct mutex cgwb_release_mutex; /* protect shutdown of wb structs */ #else struct bdi_writeback_congested *wb_congested; #endif -- cgit v1.2.3 From 92397a6c38d139d50fabbe9e2dc09b61d53b2377 Mon Sep 17 00:00:00 2001 From: Phil Reid Date: Tue, 5 Jun 2018 14:15:10 +0800 Subject: iio: buffer: fix the function signature to match implementation linux/iio/buffer-dma.h was not updated to when length was changed to unsigned int. Fixes: c043ec1ca5ba ("iio:buffer: make length types match kfifo types") Signed-off-by: Phil Reid Signed-off-by: Jonathan Cameron --- include/linux/iio/buffer-dma.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/iio/buffer-dma.h b/include/linux/iio/buffer-dma.h index 767467d886de..67c75372b691 100644 --- a/include/linux/iio/buffer-dma.h +++ b/include/linux/iio/buffer-dma.h @@ -141,7 +141,7 @@ int iio_dma_buffer_read(struct iio_buffer *buffer, size_t n, char __user *user_buffer); size_t iio_dma_buffer_data_available(struct iio_buffer *buffer); int iio_dma_buffer_set_bytes_per_datum(struct iio_buffer *buffer, size_t bpd); -int iio_dma_buffer_set_length(struct iio_buffer *buffer, int length); +int iio_dma_buffer_set_length(struct iio_buffer *buffer, unsigned int length); int iio_dma_buffer_request_update(struct iio_buffer *buffer); int iio_dma_buffer_init(struct iio_dma_buffer_queue *queue, -- cgit v1.2.3 From 5e03aa61a7f3cb99852bc3ad6925f5fa3c0dcc93 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 14 Jun 2018 10:53:34 +0530 Subject: PM / Domains: Fix return value of of_genpd_opp_to_performance_state() of_genpd_opp_to_performance_state() should return 0 for errors, but the dummy routine isn't doing that. Fix it. Signed-off-by: Viresh Kumar Acked-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki --- include/linux/pm_domain.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h index 9206a4fef9ac..139f79c8477a 100644 --- a/include/linux/pm_domain.h +++ b/include/linux/pm_domain.h @@ -276,7 +276,7 @@ static inline unsigned int of_genpd_opp_to_performance_state(struct device *dev, struct device_node *opp_node) { - return -ENODEV; + return 0; } static inline int genpd_dev_pm_attach(struct device *dev) -- cgit v1.2.3 From ad6384ba3ac98ad524194e37de379c1fe503870b Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 20 Jun 2018 11:45:37 +0530 Subject: PM / Domains: Rename opp_node to np The DT node passed here isn't necessarily an OPP node, as this routine can also be used for cases where the "required-opps" property is present directly in the device's node. Rename it. This also removes a stale comment. Acked-by: Ulf Hansson Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- include/linux/pm_domain.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h index 139f79c8477a..cb8d84090cfb 100644 --- a/include/linux/pm_domain.h +++ b/include/linux/pm_domain.h @@ -234,7 +234,7 @@ struct generic_pm_domain *of_genpd_remove_last(struct device_node *np); int of_genpd_parse_idle_states(struct device_node *dn, struct genpd_power_state **states, int *n); unsigned int of_genpd_opp_to_performance_state(struct device *dev, - struct device_node *opp_node); + struct device_node *np); int genpd_dev_pm_attach(struct device *dev); struct device *genpd_dev_pm_attach_by_id(struct device *dev, @@ -274,7 +274,7 @@ static inline int of_genpd_parse_idle_states(struct device_node *dn, static inline unsigned int of_genpd_opp_to_performance_state(struct device *dev, - struct device_node *opp_node) + struct device_node *np) { return 0; } -- cgit v1.2.3 From d2d2e3c46be5d6dd8001d0eebdf7cafb9bc7006b Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Thu, 21 Jun 2018 16:43:17 +0300 Subject: acpi: Add helper for deactivating memory region Sometimes memory resource may be overlapping with SystemMemory Operation Region by design, for example if the memory region is used as a mailbox for communication with a firmware in the system. One occasion of such mailboxes is USB Type-C Connector System Software Interface (UCSI). With regions like that, it is important that the driver is able to map the memory with the requirements it has. For example, the driver should be allowed to map the memory as non-cached memory. However, if the operation region has been accessed before the driver has mapped the memory, the memory has been marked as write-back by the time the driver is loaded. That means the driver will fail to map the memory if it expects non-cached memory. To work around the problem, introducing helper that the drivers can use to temporarily deactivate (unmap) SystemMemory Operation Regions that overlap with their IO memory. Fixes: 8243edf44152 ("usb: typec: ucsi: Add ACPI driver") Cc: stable@vger.kernel.org Reviewed-by: Rafael J. Wysocki Signed-off-by: Heikki Krogerus Signed-off-by: Greg Kroah-Hartman --- include/linux/acpi.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 4b35a66383f9..e54f40974eb0 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -443,6 +443,9 @@ int acpi_check_resource_conflict(const struct resource *res); int acpi_check_region(resource_size_t start, resource_size_t n, const char *name); +acpi_status acpi_release_memory(acpi_handle handle, struct resource *res, + u32 level); + int acpi_resources_are_enforced(void); #ifdef CONFIG_HIBERNATION -- cgit v1.2.3 From 8793bb7f4a9dd1396575d2e9337d331662cb7555 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 19 Jun 2018 13:14:56 -0700 Subject: kbuild: add macro for controlling warnings to linux/compiler.h I have occasionally run into a situation where it would make sense to control a compiler warning from a source file rather than doing so from a Makefile using the $(cc-disable-warning, ...) or $(cc-option, ...) helpers. The approach here is similar to what glibc uses, using __diag() and related macros to encapsulate a _Pragma("GCC diagnostic ...") statement that gets turned into the respective "#pragma GCC diagnostic ..." by the preprocessor when the macro gets expanded. Like glibc, I also have an argument to pass the affected compiler version, but decided to actually evaluate that one. For now, this supports GCC_4_6, GCC_4_7, GCC_4_8, GCC_4_9, GCC_5, GCC_6, GCC_7, GCC_8 and GCC_9. Adding support for CLANG_5 and other interesting versions is straightforward here. GNU compilers starting with gcc-4.2 could support it in principle, but "#pragma GCC diagnostic push" was only added in gcc-4.6, so it seems simpler to not deal with those at all. The same versions show a large number of warnings already, so it seems easier to just leave it at that and not do a more fine-grained control for them. The use cases I found so far include: - turning off the gcc-8 -Wattribute-alias warning inside of the SYSCALL_DEFINEx() macro without having to do it globally. - Reducing the build time for a simple re-make after a change, once we move the warnings from ./Makefile and ./scripts/Makefile.extrawarn into linux/compiler.h - More control over the warnings based on other configurations, using preprocessor syntax instead of Makefile syntax. This should make it easier for the average developer to understand and change things. - Adding an easy way to turn the W=1 option on unconditionally for a subdirectory or a specific file. This has been requested by several developers in the past that want to have their subsystems W=1 clean. - Integrating clang better into the build systems. Clang supports more warnings than GCC, and we probably want to classify them as default, W=1, W=2 etc, but there are cases in which the warnings should be classified differently due to excessive false positives from one or the other compiler. - Adding a way to turn the default warnings into errors (e.g. using a new "make E=0" tag) while not also turning the W=1 warnings into errors. This patch for now just adds the minimal infrastructure in order to do the first of the list above. As the #pragma GCC diagnostic takes precedence over command line options, the next step would be to convert a lot of the individual Makefiles that set nonstandard options to use __diag() instead. [paul.burton@mips.com: - Rebase atop current master. - Add __diag_GCC, or more generally __diag_, abstraction to avoid code outside of linux/compiler-gcc.h needing to duplicate knowledge about different GCC versions. - Add a comment argument to __diag_{ignore,warn,error} which isn't used in the expansion of the macros but serves to push people to document the reason for using them - per feedback from Kees Cook. - Translate severity to GCC-specific pragmas in linux/compiler-gcc.h rather than using GCC-specific in linux/compiler_types.h. - Drop all but GCC 8 macros, since we only need to define macros for versions that we need to introduce pragmas for, and as of this series that's just GCC 8. - Capitalize comments in linux/compiler-gcc.h to match the style of the rest of the file. - Line up macro definitions with tabs in linux/compiler-gcc.h.] Signed-off-by: Arnd Bergmann Signed-off-by: Paul Burton Tested-by: Christophe Leroy Tested-by: Stafford Horne Signed-off-by: Masahiro Yamada --- include/linux/compiler-gcc.h | 25 +++++++++++++++++++++++++ include/linux/compiler_types.h | 18 ++++++++++++++++++ 2 files changed, 43 insertions(+) (limited to 'include/linux') diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h index f1a7492a5cc8..fd282c7d3e5e 100644 --- a/include/linux/compiler-gcc.h +++ b/include/linux/compiler-gcc.h @@ -347,3 +347,28 @@ #if GCC_VERSION >= 50100 #define COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW 1 #endif + +/* + * Turn individual warnings and errors on and off locally, depending + * on version. + */ +#define __diag_GCC(version, severity, s) \ + __diag_GCC_ ## version(__diag_GCC_ ## severity s) + +/* Severity used in pragma directives */ +#define __diag_GCC_ignore ignored +#define __diag_GCC_warn warning +#define __diag_GCC_error error + +/* Compilers before gcc-4.6 do not understand "#pragma GCC diagnostic push" */ +#if GCC_VERSION >= 40600 +#define __diag_str1(s) #s +#define __diag_str(s) __diag_str1(s) +#define __diag(s) _Pragma(__diag_str(GCC diagnostic s)) +#endif + +#if GCC_VERSION >= 80000 +#define __diag_GCC_8(s) __diag(s) +#else +#define __diag_GCC_8(s) +#endif diff --git a/include/linux/compiler_types.h b/include/linux/compiler_types.h index 6b79a9bba9a7..a8ba6b04152c 100644 --- a/include/linux/compiler_types.h +++ b/include/linux/compiler_types.h @@ -271,4 +271,22 @@ struct ftrace_likely_data { # define __native_word(t) (sizeof(t) == sizeof(char) || sizeof(t) == sizeof(short) || sizeof(t) == sizeof(int) || sizeof(t) == sizeof(long)) #endif +#ifndef __diag +#define __diag(string) +#endif + +#ifndef __diag_GCC +#define __diag_GCC(version, severity, string) +#endif + +#define __diag_push() __diag(push) +#define __diag_pop() __diag(pop) + +#define __diag_ignore(compiler, version, option, comment) \ + __diag_ ## compiler(version, ignore, option) +#define __diag_warn(compiler, version, option, comment) \ + __diag_ ## compiler(version, warn, option) +#define __diag_error(compiler, version, option, comment) \ + __diag_ ## compiler(version, error, option) + #endif /* __LINUX_COMPILER_TYPES_H */ -- cgit v1.2.3 From bee20031772af3debe8cbaa234528f24c7892e8f Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 19 Jun 2018 13:14:57 -0700 Subject: disable -Wattribute-alias warning for SYSCALL_DEFINEx() gcc-8 warns for every single definition of a system call entry point, e.g.: include/linux/compat.h:56:18: error: 'compat_sys_rt_sigprocmask' alias between functions of incompatible types 'long int(int, compat_sigset_t *, compat_sigset_t *, compat_size_t)' {aka 'long int(int, struct *, struct *, unsigned int)'} and 'long int(long int, long int, long int, long int)' [-Werror=attribute-alias] asmlinkage long compat_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__))\ ^~~~~~~~~~ include/linux/compat.h:45:2: note: in expansion of macro 'COMPAT_SYSCALL_DEFINEx' COMPAT_SYSCALL_DEFINEx(4, _##name, __VA_ARGS__) ^~~~~~~~~~~~~~~~~~~~~~ kernel/signal.c:2601:1: note: in expansion of macro 'COMPAT_SYSCALL_DEFINE4' COMPAT_SYSCALL_DEFINE4(rt_sigprocmask, int, how, compat_sigset_t __user *, nset, ^~~~~~~~~~~~~~~~~~~~~~ include/linux/compat.h:60:18: note: aliased declaration here asmlinkage long compat_SyS##name(__MAP(x,__SC_LONG,__VA_ARGS__))\ ^~~~~~~~~~ The new warning seems reasonable in principle, but it doesn't help us here, since we rely on the type mismatch to sanitize the system call arguments. After I reported this as GCC PR82435, a new -Wno-attribute-alias option was added that could be used to turn the warning off globally on the command line, but I'd prefer to do it a little more fine-grained. Interestingly, turning a warning off and on again inside of a single macro doesn't always work, in this case I had to add an extra statement inbetween and decided to copy the __SC_TEST one from the native syscall to the compat syscall macro. See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83256 for more details about this. [paul.burton@mips.com: - Rebase atop current master. - Split GCC & version arguments to __diag_ignore() in order to match changes to the preceding patch. - Add the comment argument to match the preceding patch.] Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82435 Signed-off-by: Arnd Bergmann Signed-off-by: Paul Burton Tested-by: Christophe Leroy Tested-by: Stafford Horne Signed-off-by: Masahiro Yamada --- include/linux/compat.h | 8 +++++++- include/linux/syscalls.h | 4 ++++ 2 files changed, 11 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/compat.h b/include/linux/compat.h index b1a5562b3215..c68acc47da57 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -72,6 +72,9 @@ */ #ifndef COMPAT_SYSCALL_DEFINEx #define COMPAT_SYSCALL_DEFINEx(x, name, ...) \ + __diag_push(); \ + __diag_ignore(GCC, 8, "-Wattribute-alias", \ + "Type aliasing is used to sanitize syscall arguments");\ asmlinkage long compat_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__)); \ asmlinkage long compat_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__)) \ __attribute__((alias(__stringify(__se_compat_sys##name)))); \ @@ -80,8 +83,11 @@ asmlinkage long __se_compat_sys##name(__MAP(x,__SC_LONG,__VA_ARGS__)); \ asmlinkage long __se_compat_sys##name(__MAP(x,__SC_LONG,__VA_ARGS__)) \ { \ - return __do_compat_sys##name(__MAP(x,__SC_DELOUSE,__VA_ARGS__));\ + long ret = __do_compat_sys##name(__MAP(x,__SC_DELOUSE,__VA_ARGS__));\ + __MAP(x,__SC_TEST,__VA_ARGS__); \ + return ret; \ } \ + __diag_pop(); \ static inline long __do_compat_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__)) #endif /* COMPAT_SYSCALL_DEFINEx */ diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index 73810808cdf2..a368a68cb667 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -231,6 +231,9 @@ static inline int is_syscall_trace_event(struct trace_event_call *tp_event) */ #ifndef __SYSCALL_DEFINEx #define __SYSCALL_DEFINEx(x, name, ...) \ + __diag_push(); \ + __diag_ignore(GCC, 8, "-Wattribute-alias", \ + "Type aliasing is used to sanitize syscall arguments");\ asmlinkage long sys##name(__MAP(x,__SC_DECL,__VA_ARGS__)) \ __attribute__((alias(__stringify(__se_sys##name)))); \ ALLOW_ERROR_INJECTION(sys##name, ERRNO); \ @@ -243,6 +246,7 @@ static inline int is_syscall_trace_event(struct trace_event_call *tp_event) __PROTECT(x, ret,__MAP(x,__SC_ARGS,__VA_ARGS__)); \ return ret; \ } \ + __diag_pop(); \ static inline long __do_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__)) #endif /* __SYSCALL_DEFINEx */ -- cgit v1.2.3 From fdb5c4531c1e0e50e609df83f736b6f3a02896e2 Mon Sep 17 00:00:00 2001 From: Sean Young Date: Tue, 19 Jun 2018 00:04:24 +0100 Subject: bpf: fix attach type BPF_LIRC_MODE2 dependency wrt CONFIG_CGROUP_BPF If the kernel is compiled with CONFIG_CGROUP_BPF not enabled, it is not possible to attach, detach or query IR BPF programs to /dev/lircN devices, making them impossible to use. For embedded devices, it should be possible to use IR decoding without cgroups or CONFIG_CGROUP_BPF enabled. This change requires some refactoring, since bpf_prog_{attach,detach,query} functions are now always compiled, but their code paths for cgroups need moving out. Rather than a #ifdef CONFIG_CGROUP_BPF in kernel/bpf/syscall.c, moving them to kernel/bpf/cgroup.c and kernel/bpf/sockmap.c does not require #ifdefs since that is already conditionally compiled. Fixes: f4364dcfc86d ("media: rc: introduce BPF_PROG_LIRC_MODE2") Signed-off-by: Sean Young Signed-off-by: Daniel Borkmann --- include/linux/bpf-cgroup.h | 26 ++++++++++++++++++++++++++ include/linux/bpf.h | 8 ++++++++ include/linux/bpf_lirc.h | 5 +++-- 3 files changed, 37 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/bpf-cgroup.h b/include/linux/bpf-cgroup.h index 975fb4cf1bb7..79795c5fa7c3 100644 --- a/include/linux/bpf-cgroup.h +++ b/include/linux/bpf-cgroup.h @@ -188,12 +188,38 @@ int __cgroup_bpf_check_dev_permission(short dev_type, u32 major, u32 minor, \ __ret; \ }) +int cgroup_bpf_prog_attach(const union bpf_attr *attr, + enum bpf_prog_type ptype, struct bpf_prog *prog); +int cgroup_bpf_prog_detach(const union bpf_attr *attr, + enum bpf_prog_type ptype); +int cgroup_bpf_prog_query(const union bpf_attr *attr, + union bpf_attr __user *uattr); #else +struct bpf_prog; struct cgroup_bpf {}; static inline void cgroup_bpf_put(struct cgroup *cgrp) {} static inline int cgroup_bpf_inherit(struct cgroup *cgrp) { return 0; } +static inline int cgroup_bpf_prog_attach(const union bpf_attr *attr, + enum bpf_prog_type ptype, + struct bpf_prog *prog) +{ + return -EINVAL; +} + +static inline int cgroup_bpf_prog_detach(const union bpf_attr *attr, + enum bpf_prog_type ptype) +{ + return -EINVAL; +} + +static inline int cgroup_bpf_prog_query(const union bpf_attr *attr, + union bpf_attr __user *uattr) +{ + return -EINVAL; +} + #define cgroup_bpf_enabled (0) #define BPF_CGROUP_PRE_CONNECT_ENABLED(sk) (0) #define BPF_CGROUP_RUN_PROG_INET_INGRESS(sk,skb) ({ 0; }) diff --git a/include/linux/bpf.h b/include/linux/bpf.h index 7df32a3200f7..8827e797ff97 100644 --- a/include/linux/bpf.h +++ b/include/linux/bpf.h @@ -696,6 +696,8 @@ static inline void bpf_map_offload_map_free(struct bpf_map *map) struct sock *__sock_map_lookup_elem(struct bpf_map *map, u32 key); struct sock *__sock_hash_lookup_elem(struct bpf_map *map, void *key); int sock_map_prog(struct bpf_map *map, struct bpf_prog *prog, u32 type); +int sockmap_get_from_fd(const union bpf_attr *attr, int type, + struct bpf_prog *prog); #else static inline struct sock *__sock_map_lookup_elem(struct bpf_map *map, u32 key) { @@ -714,6 +716,12 @@ static inline int sock_map_prog(struct bpf_map *map, { return -EOPNOTSUPP; } + +static inline int sockmap_get_from_fd(const union bpf_attr *attr, int type, + struct bpf_prog *prog) +{ + return -EINVAL; +} #endif #if defined(CONFIG_XDP_SOCKETS) diff --git a/include/linux/bpf_lirc.h b/include/linux/bpf_lirc.h index 5f8a4283092d..9d9ff755ec29 100644 --- a/include/linux/bpf_lirc.h +++ b/include/linux/bpf_lirc.h @@ -5,11 +5,12 @@ #include #ifdef CONFIG_BPF_LIRC_MODE2 -int lirc_prog_attach(const union bpf_attr *attr); +int lirc_prog_attach(const union bpf_attr *attr, struct bpf_prog *prog); int lirc_prog_detach(const union bpf_attr *attr); int lirc_prog_query(const union bpf_attr *attr, union bpf_attr __user *uattr); #else -static inline int lirc_prog_attach(const union bpf_attr *attr) +static inline int lirc_prog_attach(const union bpf_attr *attr, + struct bpf_prog *prog) { return -EINVAL; } -- cgit v1.2.3 From 15bfd21fbc5d35834b9ea383dc458a1f0c9e3434 Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Tue, 26 Jun 2018 09:14:58 -0600 Subject: block: Fix transfer when chunk sectors exceeds max A device may have boundary restrictions where the number of sectors between boundaries exceeds its max transfer size. In this case, we need to cap the max size to the smaller of the two limits. Reported-by: Jitendra Bhivare Tested-by: Jitendra Bhivare Cc: Reviewed-by: Martin K. Petersen Signed-off-by: Keith Busch Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 9154570edf29..79226ca8f80f 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -1119,8 +1119,8 @@ static inline unsigned int blk_max_size_offset(struct request_queue *q, if (!q->limits.chunk_sectors) return q->limits.max_sectors; - return q->limits.chunk_sectors - - (offset & (q->limits.chunk_sectors - 1)); + return min(q->limits.max_sectors, (unsigned int)(q->limits.chunk_sectors - + (offset & (q->limits.chunk_sectors - 1)))); } static inline unsigned int blk_rq_get_max_sectors(struct request *rq, -- cgit v1.2.3 From 0efc8562491b7d36f6bbc4fbc8f3348cb6641e9c Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Thu, 31 May 2018 11:16:18 +0300 Subject: net/mlx5: E-Switch, Avoid setup attempt if not being e-switch manager In smartnic env, the host (PF) driver might not be an e-switch manager, hence the FW will err on driver attempts to deal with setting/unsetting the eswitch and as a result the overall setup of sriov will fail. Fix that by avoiding the operation if e-switch management is not allowed for this driver instance. While here, move to use the correct name for the esw manager capability name. Fixes: 81848731ff40 ('net/mlx5: E-Switch, Add SR-IOV (FDB) support') Signed-off-by: Or Gerlitz Reported-by: Guy Kushnir Reviewed-by: Eli Cohen Tested-by: Eli Cohen Signed-off-by: Saeed Mahameed --- include/linux/mlx5/eswitch.h | 2 ++ include/linux/mlx5/mlx5_ifc.h | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mlx5/eswitch.h b/include/linux/mlx5/eswitch.h index d3c9db492b30..fab5121ffb8f 100644 --- a/include/linux/mlx5/eswitch.h +++ b/include/linux/mlx5/eswitch.h @@ -8,6 +8,8 @@ #include +#define MLX5_ESWITCH_MANAGER(mdev) MLX5_CAP_GEN(mdev, eswitch_manager) + enum { SRIOV_NONE, SRIOV_LEGACY, diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h index 27134c4fcb76..ac281f5ec9b8 100644 --- a/include/linux/mlx5/mlx5_ifc.h +++ b/include/linux/mlx5/mlx5_ifc.h @@ -922,7 +922,7 @@ struct mlx5_ifc_cmd_hca_cap_bits { u8 vnic_env_queue_counters[0x1]; u8 ets[0x1]; u8 nic_flow_table[0x1]; - u8 eswitch_flow_table[0x1]; + u8 eswitch_manager[0x1]; u8 device_memory[0x1]; u8 mcam_reg[0x1]; u8 pcam_reg[0x1]; -- cgit v1.2.3 From a11e1d432b51f63ba698d044441284a661f01144 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 28 Jun 2018 09:43:44 -0700 Subject: Revert changes to convert to ->poll_mask() and aio IOCB_CMD_POLL The poll() changes were not well thought out, and completely unexplained. They also caused a huge performance regression, because "->poll()" was no longer a trivial file operation that just called down to the underlying file operations, but instead did at least two indirect calls. Indirect calls are sadly slow now with the Spectre mitigation, but the performance problem could at least be largely mitigated by changing the "->get_poll_head()" operation to just have a per-file-descriptor pointer to the poll head instead. That gets rid of one of the new indirections. But that doesn't fix the new complexity that is completely unwarranted for the regular case. The (undocumented) reason for the poll() changes was some alleged AIO poll race fixing, but we don't make the common case slower and more complex for some uncommon special case, so this all really needs way more explanations and most likely a fundamental redesign. [ This revert is a revert of about 30 different commits, not reverted individually because that would just be unnecessarily messy - Linus ] Cc: Al Viro Cc: Christoph Hellwig Signed-off-by: Linus Torvalds --- include/linux/fs.h | 2 -- include/linux/net.h | 1 - include/linux/poll.h | 12 ++++++------ include/linux/skbuff.h | 3 ++- 4 files changed, 8 insertions(+), 10 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 5c91108846db..d78d146a98da 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1720,8 +1720,6 @@ struct file_operations { int (*iterate) (struct file *, struct dir_context *); int (*iterate_shared) (struct file *, struct dir_context *); __poll_t (*poll) (struct file *, struct poll_table_struct *); - struct wait_queue_head * (*get_poll_head)(struct file *, __poll_t); - __poll_t (*poll_mask) (struct file *, __poll_t); long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long); long (*compat_ioctl) (struct file *, unsigned int, unsigned long); int (*mmap) (struct file *, struct vm_area_struct *); diff --git a/include/linux/net.h b/include/linux/net.h index 08b6eb964dd6..6554d3ba4396 100644 --- a/include/linux/net.h +++ b/include/linux/net.h @@ -147,7 +147,6 @@ struct proto_ops { int (*getname) (struct socket *sock, struct sockaddr *addr, int peer); - __poll_t (*poll_mask) (struct socket *sock, __poll_t events); __poll_t (*poll) (struct file *file, struct socket *sock, struct poll_table_struct *wait); int (*ioctl) (struct socket *sock, unsigned int cmd, diff --git a/include/linux/poll.h b/include/linux/poll.h index fdf86b4cbc71..7e0fdcf905d2 100644 --- a/include/linux/poll.h +++ b/include/linux/poll.h @@ -74,18 +74,18 @@ static inline void init_poll_funcptr(poll_table *pt, poll_queue_proc qproc) pt->_key = ~(__poll_t)0; /* all events enabled */ } -static inline bool file_has_poll_mask(struct file *file) +static inline bool file_can_poll(struct file *file) { - return file->f_op->get_poll_head && file->f_op->poll_mask; + return file->f_op->poll; } -static inline bool file_can_poll(struct file *file) +static inline __poll_t vfs_poll(struct file *file, struct poll_table_struct *pt) { - return file->f_op->poll || file_has_poll_mask(file); + if (unlikely(!file->f_op->poll)) + return DEFAULT_POLLMASK; + return file->f_op->poll(file, pt); } -__poll_t vfs_poll(struct file *file, struct poll_table_struct *pt); - struct poll_table_entry { struct file *filp; __poll_t key; diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index c86885954994..164cdedf6012 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -3252,7 +3252,8 @@ struct sk_buff *__skb_recv_datagram(struct sock *sk, unsigned flags, int *peeked, int *off, int *err); struct sk_buff *skb_recv_datagram(struct sock *sk, unsigned flags, int noblock, int *err); -__poll_t datagram_poll_mask(struct socket *sock, __poll_t events); +__poll_t datagram_poll(struct file *file, struct socket *sock, + struct poll_table_struct *wait); int skb_copy_datagram_iter(const struct sk_buff *from, int offset, struct iov_iter *to, int size); static inline int skb_copy_datagram_msg(const struct sk_buff *from, int offset, -- cgit v1.2.3 From d50d82faa0c964e31f7a946ba8aba7c715ca7ab0 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Wed, 27 Jun 2018 23:26:09 -0700 Subject: slub: fix failure when we delete and create a slab cache In kernel 4.17 I removed some code from dm-bufio that did slab cache merging (commit 21bb13276768: "dm bufio: remove code that merges slab caches") - both slab and slub support merging caches with identical attributes, so dm-bufio now just calls kmem_cache_create and relies on implicit merging. This uncovered a bug in the slub subsystem - if we delete a cache and immediatelly create another cache with the same attributes, it fails because of duplicate filename in /sys/kernel/slab/. The slub subsystem offloads freeing the cache to a workqueue - and if we create the new cache before the workqueue runs, it complains because of duplicate filename in sysfs. This patch fixes the bug by moving the call of kobject_del from sysfs_slab_remove_workfn to shutdown_cache. kobject_del must be called while we hold slab_mutex - so that the sysfs entry is deleted before a cache with the same attributes could be created. Running device-mapper-test-suite with: dmtest run --suite thin-provisioning -n /commit_failure_causes_fallback/ triggered: Buffer I/O error on dev dm-0, logical block 1572848, async page read device-mapper: thin: 253:1: metadata operation 'dm_pool_alloc_data_block' failed: error = -5 device-mapper: thin: 253:1: aborting current metadata transaction sysfs: cannot create duplicate filename '/kernel/slab/:a-0000144' CPU: 2 PID: 1037 Comm: kworker/u48:1 Not tainted 4.17.0.snitm+ #25 Hardware name: Supermicro SYS-1029P-WTR/X11DDW-L, BIOS 2.0a 12/06/2017 Workqueue: dm-thin do_worker [dm_thin_pool] Call Trace: dump_stack+0x5a/0x73 sysfs_warn_dup+0x58/0x70 sysfs_create_dir_ns+0x77/0x80 kobject_add_internal+0xba/0x2e0 kobject_init_and_add+0x70/0xb0 sysfs_slab_add+0xb1/0x250 __kmem_cache_create+0x116/0x150 create_cache+0xd9/0x1f0 kmem_cache_create_usercopy+0x1c1/0x250 kmem_cache_create+0x18/0x20 dm_bufio_client_create+0x1ae/0x410 [dm_bufio] dm_block_manager_create+0x5e/0x90 [dm_persistent_data] __create_persistent_data_objects+0x38/0x940 [dm_thin_pool] dm_pool_abort_metadata+0x64/0x90 [dm_thin_pool] metadata_operation_failed+0x59/0x100 [dm_thin_pool] alloc_data_block.isra.53+0x86/0x180 [dm_thin_pool] process_cell+0x2a3/0x550 [dm_thin_pool] do_worker+0x28d/0x8f0 [dm_thin_pool] process_one_work+0x171/0x370 worker_thread+0x49/0x3f0 kthread+0xf8/0x130 ret_from_fork+0x35/0x40 kobject_add_internal failed for :a-0000144 with -EEXIST, don't try to register things with the same name in the same directory. kmem_cache_create(dm_bufio_buffer-16) failed with error -17 Link: http://lkml.kernel.org/r/alpine.LRH.2.02.1806151817130.6333@file01.intranet.prod.int.rdu2.redhat.com Signed-off-by: Mikulas Patocka Reported-by: Mike Snitzer Tested-by: Mike Snitzer Cc: Christoph Lameter Cc: Pekka Enberg Cc: David Rientjes Cc: Joonsoo Kim Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/slub_def.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h index 09fa2c6f0e68..3a1a1dbc6f49 100644 --- a/include/linux/slub_def.h +++ b/include/linux/slub_def.h @@ -155,8 +155,12 @@ struct kmem_cache { #ifdef CONFIG_SYSFS #define SLAB_SUPPORTS_SYSFS +void sysfs_slab_unlink(struct kmem_cache *); void sysfs_slab_release(struct kmem_cache *); #else +static inline void sysfs_slab_unlink(struct kmem_cache *s) +{ +} static inline void sysfs_slab_release(struct kmem_cache *s) { } -- cgit v1.2.3 From f77bc3a82ce58fe7977a11f28e0b6cac8a9e087c Mon Sep 17 00:00:00 2001 From: Souptick Joarder Date: Wed, 27 Jun 2018 23:26:17 -0700 Subject: include/linux/dax.h: dax_iomap_fault() returns vm_fault_t Commit 1c8f422059ae ("mm: change return type to vm_fault_t") missed a conversion. It's not a big problem at present because mainline is still using typedef int vm_fault_t; Fixes: 1c8f422059ae ("mm: change return type to vm_fault_t") Link: http://lkml.kernel.org/r/20180620172046.GA27894@jordon-HP-15-Notebook-PC Signed-off-by: Souptick Joarder Reviewed-by: Andrew Morton Cc: Matthew Wilcox Cc: Dan Williams Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/dax.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/dax.h b/include/linux/dax.h index 3855e3800f48..deb0f663252f 100644 --- a/include/linux/dax.h +++ b/include/linux/dax.h @@ -135,7 +135,7 @@ void dax_flush(struct dax_device *dax_dev, void *addr, size_t size); ssize_t dax_iomap_rw(struct kiocb *iocb, struct iov_iter *iter, const struct iomap_ops *ops); -int dax_iomap_fault(struct vm_fault *vmf, enum page_entry_size pe_size, +vm_fault_t dax_iomap_fault(struct vm_fault *vmf, enum page_entry_size pe_size, pfn_t *pfnp, int *errp, const struct iomap_ops *ops); vm_fault_t dax_finish_sync_fault(struct vm_fault *vmf, enum page_entry_size pe_size, pfn_t pfn); -- cgit v1.2.3 From 9544bc5347207a68eb308cc8aaaed6c3a687cabd Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 29 Jun 2018 08:48:06 -0600 Subject: sg: remove ->sg_magic member This was introduced more than a decade ago when sg chaining was added, but we never really caught anything with it. The scatterlist entry size can be critical, since drivers allocate it, so remove the magic member. Recently it's been triggering allocation stalls and failures in NVMe. Tested-by: Jordan Glover Acked-by: Christoph Hellwig Signed-off-by: Jens Axboe --- include/linux/scatterlist.h | 18 ------------------ 1 file changed, 18 deletions(-) (limited to 'include/linux') diff --git a/include/linux/scatterlist.h b/include/linux/scatterlist.h index 51f52020ad5f..093aa57120b0 100644 --- a/include/linux/scatterlist.h +++ b/include/linux/scatterlist.h @@ -9,9 +9,6 @@ #include struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif unsigned long page_link; unsigned int offset; unsigned int length; @@ -64,7 +61,6 @@ struct sg_table { * */ -#define SG_MAGIC 0x87654321 #define SG_CHAIN 0x01UL #define SG_END 0x02UL @@ -98,7 +94,6 @@ static inline void sg_assign_page(struct scatterlist *sg, struct page *page) */ BUG_ON((unsigned long) page & (SG_CHAIN | SG_END)); #ifdef CONFIG_DEBUG_SG - BUG_ON(sg->sg_magic != SG_MAGIC); BUG_ON(sg_is_chain(sg)); #endif sg->page_link = page_link | (unsigned long) page; @@ -129,7 +124,6 @@ static inline void sg_set_page(struct scatterlist *sg, struct page *page, static inline struct page *sg_page(struct scatterlist *sg) { #ifdef CONFIG_DEBUG_SG - BUG_ON(sg->sg_magic != SG_MAGIC); BUG_ON(sg_is_chain(sg)); #endif return (struct page *)((sg)->page_link & ~(SG_CHAIN | SG_END)); @@ -195,9 +189,6 @@ static inline void sg_chain(struct scatterlist *prv, unsigned int prv_nents, **/ static inline void sg_mark_end(struct scatterlist *sg) { -#ifdef CONFIG_DEBUG_SG - BUG_ON(sg->sg_magic != SG_MAGIC); -#endif /* * Set termination bit, clear potential chain bit */ @@ -215,9 +206,6 @@ static inline void sg_mark_end(struct scatterlist *sg) **/ static inline void sg_unmark_end(struct scatterlist *sg) { -#ifdef CONFIG_DEBUG_SG - BUG_ON(sg->sg_magic != SG_MAGIC); -#endif sg->page_link &= ~SG_END; } @@ -260,12 +248,6 @@ static inline void *sg_virt(struct scatterlist *sg) static inline void sg_init_marker(struct scatterlist *sgl, unsigned int nents) { -#ifdef CONFIG_DEBUG_SG - unsigned int i; - - for (i = 0; i < nents; i++) - sgl[i].sg_magic = SG_MAGIC; -#endif sg_mark_end(&sgl[nents - 1]); } -- cgit v1.2.3 From 85782e037f8aba8922dadb24a1523ca0b82ab8bc Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Thu, 28 Jun 2018 23:34:59 +0200 Subject: bpf: undo prog rejection on read-only lock failure Partially undo commit 9facc336876f ("bpf: reject any prog that failed read-only lock") since it caused a regression, that is, syzkaller was able to manage to cause a panic via fault injection deep in set_memory_ro() path by letting an allocation fail: In x86's __change_page_attr_set_clr() it was able to change the attributes of the primary mapping but not in the alias mapping via cpa_process_alias(), so the second, inner call to the __change_page_attr() via __change_page_attr_set_clr() had to split a larger page and failed in the alloc_pages() with the artifically triggered allocation error which is then propagated down to the call site. Thus, for set_memory_ro() this means that it returned with an error, but from debugging a probe_kernel_write() revealed EFAULT on that memory since the primary mapping succeeded to get changed. Therefore the subsequent hdr->locked = 0 reset triggered the panic as it was performed on read-only memory, so call-site assumptions were infact wrong to assume that it would either succeed /or/ not succeed at all since there's no such rollback in set_memory_*() calls from partial change of mappings, in other words, we're left in a state that is "half done". A later undo via set_memory_rw() is succeeding though due to matching permissions on that part (aka due to the try_preserve_large_page() succeeding). While reproducing locally with explicitly triggering this error, the initial splitting only happens on rare occasions and in real world it would additionally need oom conditions, but that said, it could partially fail. Therefore, it is definitely wrong to bail out on set_memory_ro() error and reject the program with the set_memory_*() semantics we have today. Shouldn't have gone the extra mile since no other user in tree today infact checks for any set_memory_*() errors, e.g. neither module_enable_ro() / module_disable_ro() for module RO/NX handling which is mostly default these days nor kprobes core with alloc_insn_page() / free_insn_page() as examples that could be invoked long after bootup and original 314beb9bcabf ("x86: bpf_jit_comp: secure bpf jit against spraying attacks") did neither when it got first introduced to BPF so "improving" with bailing out was clearly not right when set_memory_*() cannot handle it today. Kees suggested that if set_memory_*() can fail, we should annotate it with __must_check, and all callers need to deal with it gracefully given those set_memory_*() markings aren't "advisory", but they're expected to actually do what they say. This might be an option worth to move forward in future but would at the same time require that set_memory_*() calls from supporting archs are guaranteed to be "atomic" in that they provide rollback if part of the range fails, once that happened, the transition from RW -> RO could be made more robust that way, while subsequent RO -> RW transition /must/ continue guaranteeing to always succeed the undo part. Reported-by: syzbot+a4eb8c7766952a1ca872@syzkaller.appspotmail.com Reported-by: syzbot+d866d1925855328eac3b@syzkaller.appspotmail.com Fixes: 9facc336876f ("bpf: reject any prog that failed read-only lock") Cc: Laura Abbott Cc: Kees Cook Signed-off-by: Daniel Borkmann Acked-by: Alexei Starovoitov Signed-off-by: Alexei Starovoitov --- include/linux/filter.h | 56 ++++++++------------------------------------------ 1 file changed, 8 insertions(+), 48 deletions(-) (limited to 'include/linux') diff --git a/include/linux/filter.h b/include/linux/filter.h index 20f2659dd829..300baad62c88 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -470,9 +470,7 @@ struct sock_fprog_kern { }; struct bpf_binary_header { - u16 pages; - u16 locked:1; - + u32 pages; /* Some arches need word alignment for their instructions */ u8 image[] __aligned(4); }; @@ -481,7 +479,7 @@ struct bpf_prog { u16 pages; /* Number of allocated pages */ u16 jited:1, /* Is our filter JIT'ed? */ jit_requested:1,/* archs need to JIT the prog */ - locked:1, /* Program image locked? */ + undo_set_mem:1, /* Passed set_memory_ro() checkpoint */ gpl_compatible:1, /* Is filter GPL compatible? */ cb_access:1, /* Is control block accessed? */ dst_needed:1, /* Do we need dst entry? */ @@ -677,46 +675,24 @@ bpf_ctx_narrow_access_ok(u32 off, u32 size, u32 size_default) static inline void bpf_prog_lock_ro(struct bpf_prog *fp) { -#ifdef CONFIG_ARCH_HAS_SET_MEMORY - fp->locked = 1; - if (set_memory_ro((unsigned long)fp, fp->pages)) - fp->locked = 0; -#endif + fp->undo_set_mem = 1; + set_memory_ro((unsigned long)fp, fp->pages); } static inline void bpf_prog_unlock_ro(struct bpf_prog *fp) { -#ifdef CONFIG_ARCH_HAS_SET_MEMORY - if (fp->locked) { - WARN_ON_ONCE(set_memory_rw((unsigned long)fp, fp->pages)); - /* In case set_memory_rw() fails, we want to be the first - * to crash here instead of some random place later on. - */ - fp->locked = 0; - } -#endif + if (fp->undo_set_mem) + set_memory_rw((unsigned long)fp, fp->pages); } static inline void bpf_jit_binary_lock_ro(struct bpf_binary_header *hdr) { -#ifdef CONFIG_ARCH_HAS_SET_MEMORY - hdr->locked = 1; - if (set_memory_ro((unsigned long)hdr, hdr->pages)) - hdr->locked = 0; -#endif + set_memory_ro((unsigned long)hdr, hdr->pages); } static inline void bpf_jit_binary_unlock_ro(struct bpf_binary_header *hdr) { -#ifdef CONFIG_ARCH_HAS_SET_MEMORY - if (hdr->locked) { - WARN_ON_ONCE(set_memory_rw((unsigned long)hdr, hdr->pages)); - /* In case set_memory_rw() fails, we want to be the first - * to crash here instead of some random place later on. - */ - hdr->locked = 0; - } -#endif + set_memory_rw((unsigned long)hdr, hdr->pages); } static inline struct bpf_binary_header * @@ -728,22 +704,6 @@ bpf_jit_binary_hdr(const struct bpf_prog *fp) return (void *)addr; } -#ifdef CONFIG_ARCH_HAS_SET_MEMORY -static inline int bpf_prog_check_pages_ro_single(const struct bpf_prog *fp) -{ - if (!fp->locked) - return -ENOLCK; - if (fp->jited) { - const struct bpf_binary_header *hdr = bpf_jit_binary_hdr(fp); - - if (!hdr->locked) - return -ENOLCK; - } - - return 0; -} -#endif - int sk_filter_trim_cap(struct sock *sk, struct sk_buff *skb, unsigned int cap); static inline int sk_filter(struct sock *sk, struct sk_buff *skb) { -- cgit v1.2.3 From 603d4cf8fe095b1ee78f423d514427be507fb513 Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Sat, 30 Jun 2018 17:38:55 +0200 Subject: net: fix use-after-free in GRO with ESP Since the addition of GRO for ESP, gro_receive can consume the skb and return -EINPROGRESS. In that case, the lower layer GRO handler cannot touch the skb anymore. Commit 5f114163f2f5 ("net: Add a skb_gro_flush_final helper.") converted some of the gro_receive handlers that can lead to ESP's gro_receive so that they wouldn't access the skb when -EINPROGRESS is returned, but missed other spots, mainly in tunneling protocols. This patch finishes the conversion to using skb_gro_flush_final(), and adds a new helper, skb_gro_flush_final_remcsum(), used in VXLAN and GUE. Fixes: 5f114163f2f5 ("net: Add a skb_gro_flush_final helper.") Signed-off-by: Sabrina Dubroca Reviewed-by: Stefano Brivio Signed-off-by: David S. Miller --- include/linux/netdevice.h | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 3ec9850c7936..3d0cc0b5cec2 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2789,11 +2789,31 @@ static inline void skb_gro_flush_final(struct sk_buff *skb, struct sk_buff **pp, if (PTR_ERR(pp) != -EINPROGRESS) NAPI_GRO_CB(skb)->flush |= flush; } +static inline void skb_gro_flush_final_remcsum(struct sk_buff *skb, + struct sk_buff **pp, + int flush, + struct gro_remcsum *grc) +{ + if (PTR_ERR(pp) != -EINPROGRESS) { + NAPI_GRO_CB(skb)->flush |= flush; + skb_gro_remcsum_cleanup(skb, grc); + skb->remcsum_offload = 0; + } +} #else static inline void skb_gro_flush_final(struct sk_buff *skb, struct sk_buff **pp, int flush) { NAPI_GRO_CB(skb)->flush |= flush; } +static inline void skb_gro_flush_final_remcsum(struct sk_buff *skb, + struct sk_buff **pp, + int flush, + struct gro_remcsum *grc) +{ + NAPI_GRO_CB(skb)->flush |= flush; + skb_gro_remcsum_cleanup(skb, grc); + skb->remcsum_offload = 0; +} #endif static inline int dev_hard_header(struct sk_buff *skb, struct net_device *dev, -- cgit v1.2.3 From 1cef1150ef40ec52f507436a14230cbc2623299c Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 7 Jun 2018 11:45:49 +0200 Subject: kthread, sched/core: Fix kthread_parkme() (again...) Gaurav reports that commit: 85f1abe0019f ("kthread, sched/wait: Fix kthread_parkme() completion issue") isn't working for him. Because of the following race: > controller Thread CPUHP Thread > takedown_cpu > kthread_park > kthread_parkme > Set KTHREAD_SHOULD_PARK > smpboot_thread_fn > set Task interruptible > > > wake_up_process > if (!(p->state & state)) > goto out; > > Kthread_parkme > SET TASK_PARKED > schedule > raw_spin_lock(&rq->lock) > ttwu_remote > waiting for __task_rq_lock > context_switch > > finish_lock_switch > > > > Case TASK_PARKED > kthread_park_complete > > > SET Running Furthermore, Oleg noticed that the whole scheduler TASK_PARKED handling is buggered because the TASK_DEAD thing is done with preemption disabled, the current code can still complete early on preemption :/ So basically revert that earlier fix and go with a variant of the alternative mentioned in the commit. Promote TASK_PARKED to special state to avoid the store-store issue on task->state leading to the WARN in kthread_unpark() -> __kthread_bind(). But in addition, add wait_task_inactive() to kthread_park() to ensure the task really is PARKED when we return from kthread_park(). This avoids the whole kthread still gets migrated nonsense -- although it would be really good to get this done differently. Reported-by: Gaurav Kohli Signed-off-by: Peter Zijlstra (Intel) Cc: Linus Torvalds Cc: Oleg Nesterov Cc: Peter Zijlstra Cc: Thomas Gleixner Fixes: 85f1abe0019f ("kthread, sched/wait: Fix kthread_parkme() completion issue") Signed-off-by: Ingo Molnar --- include/linux/kthread.h | 1 - include/linux/sched.h | 2 +- 2 files changed, 1 insertion(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/kthread.h b/include/linux/kthread.h index 2803264c512f..c1961761311d 100644 --- a/include/linux/kthread.h +++ b/include/linux/kthread.h @@ -62,7 +62,6 @@ void *kthread_probe_data(struct task_struct *k); int kthread_park(struct task_struct *k); void kthread_unpark(struct task_struct *k); void kthread_parkme(void); -void kthread_park_complete(struct task_struct *k); int kthreadd(void *unused); extern struct task_struct *kthreadd_task; diff --git a/include/linux/sched.h b/include/linux/sched.h index 9256118bd40c..43731fe51c97 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -118,7 +118,7 @@ struct task_group; * the comment with set_special_state(). */ #define is_special_task_state(state) \ - ((state) & (__TASK_STOPPED | __TASK_TRACED | TASK_DEAD)) + ((state) & (__TASK_STOPPED | __TASK_TRACED | TASK_PARKED | TASK_DEAD)) #define __set_current_state(state_value) \ do { \ -- cgit v1.2.3 From d03db2bc26f0e4a6849ad649a09c9c73fccdc656 Mon Sep 17 00:00:00 2001 From: Nick Desaulniers Date: Thu, 21 Jun 2018 09:23:22 -0700 Subject: compiler-gcc.h: Add __attribute__((gnu_inline)) to all inline declarations Functions marked extern inline do not emit an externally visible function when the gnu89 C standard is used. Some KBUILD Makefiles overwrite KBUILD_CFLAGS. This is an issue for GCC 5.1+ users as without an explicit C standard specified, the default is gnu11. Since c99, the semantics of extern inline have changed such that an externally visible function is always emitted. This can lead to multiple definition errors of extern inline functions at link time of compilation units whose build files have removed an explicit C standard compiler flag for users of GCC 5.1+ or Clang. Suggested-by: Arnd Bergmann Suggested-by: H. Peter Anvin Suggested-by: Joe Perches Signed-off-by: Nick Desaulniers Acked-by: Juergen Gross Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: acme@redhat.com Cc: akataria@vmware.com Cc: akpm@linux-foundation.org Cc: andrea.parri@amarulasolutions.com Cc: ard.biesheuvel@linaro.org Cc: aryabinin@virtuozzo.com Cc: astrachan@google.com Cc: boris.ostrovsky@oracle.com Cc: brijesh.singh@amd.com Cc: caoj.fnst@cn.fujitsu.com Cc: geert@linux-m68k.org Cc: ghackmann@google.com Cc: gregkh@linuxfoundation.org Cc: jan.kiszka@siemens.com Cc: jarkko.sakkinen@linux.intel.com Cc: jpoimboe@redhat.com Cc: keescook@google.com Cc: kirill.shutemov@linux.intel.com Cc: kstewart@linuxfoundation.org Cc: linux-efi@vger.kernel.org Cc: linux-kbuild@vger.kernel.org Cc: manojgupta@google.com Cc: mawilcox@microsoft.com Cc: michal.lkml@markovi.net Cc: mjg59@google.com Cc: mka@chromium.org Cc: pombredanne@nexb.com Cc: rientjes@google.com Cc: rostedt@goodmis.org Cc: sedat.dilek@gmail.com Cc: thomas.lendacky@amd.com Cc: tstellar@redhat.com Cc: tweek@google.com Cc: virtualization@lists.linux-foundation.org Cc: will.deacon@arm.com Cc: yamada.masahiro@socionext.com Link: http://lkml.kernel.org/r/20180621162324.36656-2-ndesaulniers@google.com Signed-off-by: Ingo Molnar --- include/linux/compiler-gcc.h | 29 ++++++++++++++++++++++------- 1 file changed, 22 insertions(+), 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h index fd282c7d3e5e..573f5a7d42d4 100644 --- a/include/linux/compiler-gcc.h +++ b/include/linux/compiler-gcc.h @@ -65,6 +65,18 @@ #define __must_be_array(a) BUILD_BUG_ON_ZERO(__same_type((a), &(a)[0])) #endif +/* + * Feature detection for gnu_inline (gnu89 extern inline semantics). Either + * __GNUC_STDC_INLINE__ is defined (not using gnu89 extern inline semantics, + * and we opt in to the gnu89 semantics), or __GNUC_STDC_INLINE__ is not + * defined so the gnu89 semantics are the default. + */ +#ifdef __GNUC_STDC_INLINE__ +# define __gnu_inline __attribute__((gnu_inline)) +#else +# define __gnu_inline +#endif + /* * Force always-inline if the user requests it so via the .config, * or if gcc is too old. @@ -72,19 +84,22 @@ * -Wunused-function. This turns out to avoid the need for complex #ifdef * directives. Suppress the warning in clang as well by using "unused" * function attribute, which is redundant but not harmful for gcc. + * Prefer gnu_inline, so that extern inline functions do not emit an + * externally visible function. This makes extern inline behave as per gnu89 + * semantics rather than c99. This prevents multiple symbol definition errors + * of extern inline functions at link time. + * A lot of inline functions can cause havoc with function tracing. */ #if !defined(CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING) || \ !defined(CONFIG_OPTIMIZE_INLINING) || (__GNUC__ < 4) -#define inline inline __attribute__((always_inline,unused)) notrace -#define __inline__ __inline__ __attribute__((always_inline,unused)) notrace -#define __inline __inline __attribute__((always_inline,unused)) notrace +#define inline \ + inline __attribute__((always_inline, unused)) notrace __gnu_inline #else -/* A lot of inline functions can cause havoc with function tracing */ -#define inline inline __attribute__((unused)) notrace -#define __inline__ __inline__ __attribute__((unused)) notrace -#define __inline __inline __attribute__((unused)) notrace +#define inline inline __attribute__((unused)) notrace __gnu_inline #endif +#define __inline__ inline +#define __inline inline #define __always_inline inline __attribute__((always_inline)) #define noinline __attribute__((noinline)) -- cgit v1.2.3 From 5ccba64a560fa6ca06008d4001f5d46ebeb34b41 Mon Sep 17 00:00:00 2001 From: Yisheng Xie Date: Fri, 2 Feb 2018 10:14:49 +0800 Subject: ftrace: Nuke clear_ftrace_function clear_ftrace_function is not used outside of ftrace.c and is not help to use a function, so nuke it per Steve's suggestion. Link: http://lkml.kernel.org/r/1517537689-34947-1-git-send-email-xieyisheng1@huawei.com Suggested-by: Steven Rostedt Signed-off-by: Yisheng Xie Signed-off-by: Steven Rostedt (VMware) --- include/linux/ftrace.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index 8154f4920fcb..ebb77674be90 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -223,7 +223,6 @@ extern enum ftrace_tracing_type_t ftrace_tracing_type; */ int register_ftrace_function(struct ftrace_ops *ops); int unregister_ftrace_function(struct ftrace_ops *ops); -void clear_ftrace_function(void); extern void ftrace_stub(unsigned long a0, unsigned long a1, struct ftrace_ops *op, struct pt_regs *regs); @@ -239,7 +238,6 @@ static inline int ftrace_nr_registered_ops(void) { return 0; } -static inline void clear_ftrace_function(void) { } static inline void ftrace_kill(void) { } static inline void ftrace_free_init_mem(void) { } static inline void ftrace_free_mem(struct module *mod, void *start, void *end) { } -- cgit v1.2.3 From 1a8861f117608e269647fb09658ce77bd5899d42 Mon Sep 17 00:00:00 2001 From: "Daniel M. Lambea" Date: Tue, 17 Jul 2018 22:35:36 +0100 Subject: HID: cougar: make compare_device_paths reusable The function compare_device_paths from wacom_sys.c is generic and useful for other drivers. Move the function to hid-core and rename it as hid_compare_device_paths. Signed-off-by: Daniel M. Lambea Reviewed-by: Benjamin Tissoires Signed-off-by: Jiri Kosina --- include/linux/hid.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/hid.h b/include/linux/hid.h index 773bcb1d4044..938d9ba6d7cd 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -894,6 +894,8 @@ const struct hid_device_id *hid_match_id(const struct hid_device *hdev, const struct hid_device_id *id); const struct hid_device_id *hid_match_device(struct hid_device *hdev, struct hid_driver *hdrv); +bool hid_compare_device_paths(struct hid_device *hdev_a, + struct hid_device *hdev_b, char separator); s32 hid_snto32(__u32 value, unsigned n); __u32 hid_field_extract(const struct hid_device *hid, __u8 *report, unsigned offset, unsigned n); -- cgit v1.2.3