From e162b39a368f0401e41b558f430c354d12a85b37 Mon Sep 17 00:00:00 2001 From: Mandeep Singh Baines Date: Thu, 15 Jan 2009 11:08:40 -0800 Subject: softlockup: decouple hung tasks check from softlockup detection Decoupling allows: * hung tasks check to happen at very low priority * hung tasks check and softlockup to be enabled/disabled independently at compile and/or run-time * individual panic settings to be enabled disabled independently at compile and/or run-time * softlockup threshold to be reduced without increasing hung tasks poll frequency (hung task check is expensive relative to softlock watchdog) * hung task check to be zero over-head when disabled at run-time Signed-off-by: Mandeep Singh Baines Signed-off-by: Ingo Molnar --- include/linux/sched.h | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 54cbabf3b871..f2f94d532302 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -297,9 +297,6 @@ extern int proc_dosoftlockup_thresh(struct ctl_table *table, int write, struct file *filp, void __user *buffer, size_t *lenp, loff_t *ppos); extern unsigned int softlockup_panic; -extern unsigned long sysctl_hung_task_check_count; -extern unsigned long sysctl_hung_task_timeout_secs; -extern unsigned long sysctl_hung_task_warnings; extern int softlockup_thresh; #else static inline void softlockup_tick(void) @@ -316,6 +313,15 @@ static inline void touch_all_softlockup_watchdogs(void) } #endif +#ifdef CONFIG_DETECT_HUNG_TASK +extern unsigned int sysctl_hung_task_panic; +extern unsigned long sysctl_hung_task_check_count; +extern unsigned long sysctl_hung_task_timeout_secs; +extern unsigned long sysctl_hung_task_warnings; +extern int proc_dohung_task_timeout_secs(struct ctl_table *table, int write, + struct file *filp, void __user *buffer, + size_t *lenp, loff_t *ppos); +#endif /* Attach to any functions which should be ignored in wchan output. */ #define __sched __attribute__((__section__(".sched.text"))) @@ -1236,7 +1242,7 @@ struct task_struct { /* ipc stuff */ struct sysv_sem sysvsem; #endif -#ifdef CONFIG_DETECT_SOFTLOCKUP +#ifdef CONFIG_DETECT_HUNG_TASK /* hung task detection */ unsigned long last_switch_timestamp; unsigned long last_switch_count; -- cgit v1.2.3 From 5e54f5986a579b8445aa1d5ad3435c2cf7568bed Mon Sep 17 00:00:00 2001 From: Mandeep Singh Baines Date: Fri, 30 Jan 2009 15:29:54 -0800 Subject: softlockup: remove unused definition for spawn_softlockup_task The definition of spawn_softlockup_task in sched.h became unnecessary once it was converted to the early_initcall() interface. Signed-off-by: Mandeep Singh Baines Signed-off-by: Ingo Molnar --- include/linux/sched.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index f2f94d532302..2a2811c6239d 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -302,9 +302,6 @@ extern int softlockup_thresh; static inline void softlockup_tick(void) { } -static inline void spawn_softlockup_task(void) -{ -} static inline void touch_softlockup_watchdog(void) { } -- cgit v1.2.3 From 9705ecc5c1f8f34f756164a711b4cc61110c0283 Mon Sep 17 00:00:00 2001 From: Balaji Rao Date: Tue, 27 Jan 2009 19:23:12 +0530 Subject: pcf50633_charger: Enable periodic charging restart The battery charger state machine switches into charging mode when the battery voltage falls below 96% of a battery float voltage. But the voltage drop in Li-ion batteries is marginal(1~2 %) till about 80% of its capacity - which means, after a BATFULL, charging won't be restarted until 80%. This work_struct function restarts charging at regular intervals to make sure the battery doesn't discharge too much. Signed-off-by: Balaji Rao Cc: Andy Green Signed-off-by: Anton Vorontsov --- include/linux/mfd/pcf50633/core.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/pcf50633/core.h b/include/linux/mfd/pcf50633/core.h index 4455b212d75a..c8f51c3c0a72 100644 --- a/include/linux/mfd/pcf50633/core.h +++ b/include/linux/mfd/pcf50633/core.h @@ -29,6 +29,8 @@ struct pcf50633_platform_data { char **batteries; int num_batteries; + int charging_restart_interval; + /* Callbacks */ void (*probe_done)(struct pcf50633 *); void (*mbc_event_callback)(struct pcf50633 *, int); -- cgit v1.2.3 From cc52a29e6245acd9032fcfa0ffcab4cc612de986 Mon Sep 17 00:00:00 2001 From: Balaji Rao Date: Tue, 27 Jan 2009 19:22:55 +0530 Subject: pcf50633_charger: Remove unused mbc_set_status function The 'pcf50633_mbc_set_status' function is unused, so remove it. Signed-off-by: Balaji Rao Cc: Andy Green Signed-off-by: Anton Vorontsov --- include/linux/mfd/pcf50633/mbc.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mfd/pcf50633/mbc.h b/include/linux/mfd/pcf50633/mbc.h index 6e17619b773a..4119579acf2c 100644 --- a/include/linux/mfd/pcf50633/mbc.h +++ b/include/linux/mfd/pcf50633/mbc.h @@ -128,7 +128,6 @@ enum pcf50633_reg_mbcs3 { int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma); int pcf50633_mbc_get_status(struct pcf50633 *); -void pcf50633_mbc_set_status(struct pcf50633 *, int what, int status); #endif -- cgit v1.2.3 From 5bf2b994bfe11bfe86231050897b2d881ca544d9 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Sun, 18 Jan 2009 17:40:27 +0100 Subject: pda_power: Add optional OTG transceiver and voltage regulator support This patch allows machines to use an OTG transceiver driver instead of supplying a custom is_usb_online callback to check USB power. Also, in the case that the OTG transceiver handles charger control when connected to USB, a regulator named "ac_draw" can be supplied instead of the custom set_charge callback to control the charger when connected to AC. The check for (transceiver->state == OTG_STATE_B_PERIPHERAL) in otg_is_usb_online is probably too simple, I'm just using this with a peripheral only device and gpio_vbus + bq24022. I'm not sure which other OTG states can supply power. Signed-off-by: Philipp Zabel Signed-off-by: Anton Vorontsov --- include/linux/pda_power.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pda_power.h b/include/linux/pda_power.h index cb7d10f30763..d4cf7a2ceb3e 100644 --- a/include/linux/pda_power.h +++ b/include/linux/pda_power.h @@ -31,6 +31,8 @@ struct pda_power_pdata { unsigned int wait_for_status; /* msecs, default is 500 */ unsigned int wait_for_charger; /* msecs, default is 500 */ unsigned int polling_interval; /* msecs, default is 2000 */ + + unsigned long ac_max_uA; /* current to draw when on AC */ }; #endif /* __PDA_POWER_H__ */ -- cgit v1.2.3 From 17406b82d621930cca8ccc1272cdac9a7dae8e40 Mon Sep 17 00:00:00 2001 From: Mandeep Singh Baines Date: Fri, 6 Feb 2009 15:37:47 -0800 Subject: softlockup: remove timestamp checking from hung_task Impact: saves sizeof(long) bytes per task_struct By guaranteeing that sysctl_hung_task_timeout_secs have elapsed between tasklist scans we can avoid using timestamps. Signed-off-by: Mandeep Singh Baines Signed-off-by: Ingo Molnar --- include/linux/sched.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 2a2811c6239d..e0d723fea9f5 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1241,7 +1241,6 @@ struct task_struct { #endif #ifdef CONFIG_DETECT_HUNG_TASK /* hung task detection */ - unsigned long last_switch_timestamp; unsigned long last_switch_count; #endif /* CPU-specific state of this task */ -- cgit v1.2.3 From 73969ff0eda233f140bcbed1251431387b43f383 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 4 Mar 2009 23:27:14 -0800 Subject: Input: generic driver for rotary encoders on GPIOs This patch adds a generic driver for rotary encoders connected to GPIO pins of a system. It relies on gpiolib and generic hardware irqs. The documentation that also comes with this patch explains the concept and how to use the driver. Signed-off-by: Daniel Mack Tested-by: H Hartley Sweeten Signed-off-by: Dmitry Torokhov --- include/linux/rotary_encoder.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) create mode 100644 include/linux/rotary_encoder.h (limited to 'include/linux') diff --git a/include/linux/rotary_encoder.h b/include/linux/rotary_encoder.h new file mode 100644 index 000000000000..12d63a30c347 --- /dev/null +++ b/include/linux/rotary_encoder.h @@ -0,0 +1,13 @@ +#ifndef __ROTARY_ENCODER_H__ +#define __ROTARY_ENCODER_H__ + +struct rotary_encoder_platform_data { + unsigned int steps; + unsigned int axis; + unsigned int gpio_a; + unsigned int gpio_b; + unsigned int inverted_a; + unsigned int inverted_b; +}; + +#endif /* __ROTARY_ENCODER_H__ */ -- cgit v1.2.3 From b4be468cc1e65110d9144751bf7079dad6f142b7 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Mon, 9 Mar 2009 20:12:52 -0700 Subject: Input: add AD7879 Touchscreen driver [randy.dunlap@oracle.com: don't use bus_id] [dtor@mail.ru: locking and other fixups] Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu Signed-off-by: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Dmitry Torokhov --- include/linux/spi/ad7879.h | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) create mode 100644 include/linux/spi/ad7879.h (limited to 'include/linux') diff --git a/include/linux/spi/ad7879.h b/include/linux/spi/ad7879.h new file mode 100644 index 000000000000..4231104c9afa --- /dev/null +++ b/include/linux/spi/ad7879.h @@ -0,0 +1,35 @@ +/* linux/spi/ad7879.h */ + +/* Touchscreen characteristics vary between boards and models. The + * platform_data for the device's "struct device" holds this information. + * + * It's OK if the min/max values are zero. + */ +struct ad7879_platform_data { + u16 model; /* 7879 */ + u16 x_plate_ohms; + u16 x_min, x_max; + u16 y_min, y_max; + u16 pressure_min, pressure_max; + + /* [0..255] 0=OFF Starts at 1=550us and goes + * all the way to 9.440ms in steps of 35us. + */ + u8 pen_down_acc_interval; + /* [0..15] Starts at 0=128us and goes all the + * way to 4.096ms in steps of 128us. + */ + u8 first_conversion_delay; + /* [0..3] 0 = 2us, 1 = 4us, 2 = 8us, 3 = 16us */ + u8 acquisition_time; + /* [0..3] Average X middle samples 0 = 2, 1 = 4, 2 = 8, 3 = 16 */ + u8 averaging; + /* [0..3] Perform X measurements 0 = OFF, + * 1 = 4, 2 = 8, 3 = 16 (median > averaging) + */ + u8 median; + /* 1 = AUX/VBAT/GPIO set to GPIO Output */ + u8 gpio_output; + /* Initial GPIO pin state (valid if gpio_output = 1) */ + u8 gpio_default; +}; -- cgit v1.2.3 From 3aa551c9b4c40018f0e261a178e3d25478dc04a9 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 23 Mar 2009 18:28:15 +0100 Subject: genirq: add threaded interrupt handler support Add support for threaded interrupt handlers: A device driver can request that its main interrupt handler runs in a thread. To achive this the device driver requests the interrupt with request_threaded_irq() and provides additionally to the handler a thread function. The handler function is called in hard interrupt context and needs to check whether the interrupt originated from the device. If the interrupt originated from the device then the handler can either return IRQ_HANDLED or IRQ_WAKE_THREAD. IRQ_HANDLED is returned when no further action is required. IRQ_WAKE_THREAD causes the genirq code to invoke the threaded (main) handler. When IRQ_WAKE_THREAD is returned handler must have disabled the interrupt on the device level. This is mandatory for shared interrupt handlers, but we need to do it as well for obscure x86 hardware where disabling an interrupt on the IO_APIC level redirects the interrupt to the legacy PIC interrupt lines. Signed-off-by: Thomas Gleixner Reviewed-by: Ingo Molnar --- include/linux/hardirq.h | 2 +- include/linux/interrupt.h | 37 +++++++++++++++++++++++++++++++++++-- include/linux/irq.h | 5 +++++ include/linux/irqreturn.h | 2 ++ include/linux/sched.h | 5 +++++ 5 files changed, 48 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h index f83288347dda..2dfaadbdb2ac 100644 --- a/include/linux/hardirq.h +++ b/include/linux/hardirq.h @@ -105,7 +105,7 @@ # define IRQ_EXIT_OFFSET HARDIRQ_OFFSET #endif -#ifdef CONFIG_SMP +#if defined(CONFIG_SMP) || defined(CONFIG_GENERIC_HARDIRQS) extern void synchronize_irq(unsigned int irq); #else # define synchronize_irq(irq) barrier() diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index 0c9cb63e6895..6fc2b720c231 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -59,6 +59,16 @@ #define IRQF_NOBALANCING 0x00000800 #define IRQF_IRQPOLL 0x00001000 +/* + * Bits used by threaded handlers: + * IRQTF_RUNTHREAD - signals that the interrupt handler thread should run + * IRQTF_DIED - handler thread died + */ +enum { + IRQTF_RUNTHREAD, + IRQTF_DIED, +}; + typedef irqreturn_t (*irq_handler_t)(int, void *); /** @@ -71,6 +81,9 @@ typedef irqreturn_t (*irq_handler_t)(int, void *); * @next: pointer to the next irqaction for shared interrupts * @irq: interrupt number * @dir: pointer to the proc/irq/NN/name entry + * @thread_fn: interupt handler function for threaded interrupts + * @thread: thread pointer for threaded interrupts + * @thread_flags: flags related to @thread */ struct irqaction { irq_handler_t handler; @@ -81,11 +94,31 @@ struct irqaction { struct irqaction *next; int irq; struct proc_dir_entry *dir; + irq_handler_t thread_fn; + struct task_struct *thread; + unsigned long thread_flags; }; extern irqreturn_t no_action(int cpl, void *dev_id); -extern int __must_check request_irq(unsigned int, irq_handler_t handler, - unsigned long, const char *, void *); + +extern int __must_check +request_threaded_irq(unsigned int irq, irq_handler_t handler, + irq_handler_t thread_fn, + unsigned long flags, const char *name, void *dev); + +static inline int __must_check +request_irq(unsigned int irq, irq_handler_t handler, unsigned long flags, + const char *name, void *dev) +{ + return request_threaded_irq(irq, handler, NULL, flags, name, dev); +} + +#ifdef CONFIG_GENERIC_HARDIRQS +extern void exit_irq_thread(void); +#else +static inline void exit_irq_thread(void) { } +#endif + extern void free_irq(unsigned int, void *); struct device; diff --git a/include/linux/irq.h b/include/linux/irq.h index 873e4ac11b81..8b1cf0630210 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -20,6 +20,7 @@ #include #include #include +#include #include #include @@ -155,6 +156,8 @@ struct irq_2_iommu; * @affinity: IRQ affinity on SMP * @cpu: cpu index useful for balancing * @pending_mask: pending rebalanced interrupts + * @threads_active: number of irqaction threads currently running + * @wait_for_threads: wait queue for sync_irq to wait for threaded handlers * @dir: /proc/irq/ procfs entry * @name: flow handler name for /proc/interrupts output */ @@ -186,6 +189,8 @@ struct irq_desc { cpumask_var_t pending_mask; #endif #endif + atomic_t threads_active; + wait_queue_head_t wait_for_threads; #ifdef CONFIG_PROC_FS struct proc_dir_entry *dir; #endif diff --git a/include/linux/irqreturn.h b/include/linux/irqreturn.h index c5584ca5b8c9..819acaaac3f5 100644 --- a/include/linux/irqreturn.h +++ b/include/linux/irqreturn.h @@ -5,10 +5,12 @@ * enum irqreturn * @IRQ_NONE interrupt was not from this device * @IRQ_HANDLED interrupt was handled by this device + * @IRQ_WAKE_THREAD handler requests to wake the handler thread */ enum irqreturn { IRQ_NONE, IRQ_HANDLED, + IRQ_WAKE_THREAD, }; typedef enum irqreturn irqreturn_t; diff --git a/include/linux/sched.h b/include/linux/sched.h index 46d680643f89..38b77b0f56e5 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1292,6 +1292,11 @@ struct task_struct { /* Protection of (de-)allocation: mm, files, fs, tty, keyrings */ spinlock_t alloc_lock; +#ifdef CONFIG_GENERIC_HARDIRQS + /* IRQ handler threads */ + struct irqaction *irqaction; +#endif + /* Protection of the PI data structures: */ spinlock_t pi_lock; -- cgit v1.2.3 From 935bd5b971f0df7c06d214d022cf8392e2f37952 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Mon, 23 Mar 2009 18:28:16 +0100 Subject: genirq: add support for threaded interrupts to devres Some devices use devres_request_irq() for to install their interrupt handler. Add support for threaded interrupts to devres as well. [tglx - simplified and adapted to latest threadirq version] Signed-off-by: Arjan van de Ven Signed-off-by: Thomas Gleixner --- include/linux/interrupt.h | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index 6fc2b720c231..dbf6a6fd116c 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -123,9 +123,20 @@ extern void free_irq(unsigned int, void *); struct device; -extern int __must_check devm_request_irq(struct device *dev, unsigned int irq, - irq_handler_t handler, unsigned long irqflags, - const char *devname, void *dev_id); +extern int __must_check +devm_request_threaded_irq(struct device *dev, unsigned int irq, + irq_handler_t handler, irq_handler_t thread_fn, + unsigned long irqflags, const char *devname, + void *dev_id); + +static inline int __must_check +devm_request_irq(struct device *dev, unsigned int irq, irq_handler_t handler, + unsigned long irqflags, const char *devname, void *dev_id) +{ + return devm_request_threaded_irq(dev, irq, handler, NULL, irqflags, + devname, dev_id); +} + extern void devm_free_irq(struct device *dev, unsigned int irq, void *dev_id); /* -- cgit v1.2.3 From f48fe81e5b032914183e9a17052313720c2cac56 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 24 Mar 2009 11:46:22 +0100 Subject: genirq: threaded irq handlers review fixups Delta patch to address the review comments. - Implement warning when IRQ_WAKE_THREAD is requested and no thread handler installed - coding style fixes Pointed-out-by: Christoph Hellwig Signed-off-by: Thomas Gleixner --- include/linux/interrupt.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index dbf6a6fd116c..266a5f5f57cc 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -63,10 +63,12 @@ * Bits used by threaded handlers: * IRQTF_RUNTHREAD - signals that the interrupt handler thread should run * IRQTF_DIED - handler thread died + * IRQTF_WARNED - warning "IRQ_WAKE_THREAD w/o thread_fn" has been printed */ enum { IRQTF_RUNTHREAD, IRQTF_DIED, + IRQTF_WARNED, }; typedef irqreturn_t (*irq_handler_t)(int, void *); -- cgit v1.2.3 From 3a38148f0488069cadb75c4a6909954072d648bf Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 24 Mar 2009 20:27:39 +0100 Subject: genirq: provide old request_irq() for CONFIG_GENERIC_HARDIRQ=n Impact: Undo compile breakage for archs with CONFIG_GENERIC_HARDIRQ=n The threaded interrupt handler patches changed request_irq from extern to inline. Architectures which do not use the generic irq code still have request_irq() as a global function and therefor fail to compile. Keep the extern declaration for CONFIG_GENERIC_HARDIRQ=n Signed-off-by: Thomas Gleixner --- include/linux/interrupt.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index 266a5f5f57cc..7e63b824833f 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -103,6 +103,7 @@ struct irqaction { extern irqreturn_t no_action(int cpl, void *dev_id); +#ifdef CONFIG_GENERIC_HARDIRQS extern int __must_check request_threaded_irq(unsigned int irq, irq_handler_t handler, irq_handler_t thread_fn, @@ -115,9 +116,13 @@ request_irq(unsigned int irq, irq_handler_t handler, unsigned long flags, return request_threaded_irq(irq, handler, NULL, flags, name, dev); } -#ifdef CONFIG_GENERIC_HARDIRQS extern void exit_irq_thread(void); #else + +extern int __must_check +request_irq(unsigned int irq, irq_handler_t handler, unsigned long flags, + const char *name, void *dev); + static inline void exit_irq_thread(void) { } #endif -- cgit v1.2.3 From de18836e447c2dc30120c0919b8db8ddc0401cc4 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 25 Mar 2009 17:33:38 +0100 Subject: genirq: fix devres.o build for GENERIC_HARDIRQS=n kernel/irq/devres.c is built by sparc (32bit) and m68k via the obscure ../../../kernel/irq/devres.o reference in arch/[sparc/m68k]/kernel/Makefile To avoid ifdeffery in devres.c provide request_threaded_irq as an inline for these users. Signed-off-by: Thomas Gleixner --- include/linux/interrupt.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'include/linux') diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index 7e63b824833f..143192f48bf3 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -123,6 +123,20 @@ extern int __must_check request_irq(unsigned int irq, irq_handler_t handler, unsigned long flags, const char *name, void *dev); +/* + * Special function to avoid ifdeffery in kernel/irq/devres.c which + * gets magically built by GENERIC_HARDIRQS=n architectures (sparc, + * m68k). I really love these $@%#!* obvious Makefile references: + * ../../../kernel/irq/devres.o + */ +static inline int __must_check +request_threaded_irq(unsigned int irq, irq_handler_t handler, + irq_handler_t thread_fn, + unsigned long flags, const char *name, void *dev) +{ + return request_irq(irq, handler, flags, name, dev); +} + static inline void exit_irq_thread(void) { } #endif -- cgit v1.2.3 From 9310933c832719b095f82dab30c6bf4e75e937ee Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Sat, 28 Mar 2009 15:07:16 -0600 Subject: powerpc: Remove unused symbols from fsl_devices.h Remove old artifacts leftover from the platform driver gianfar and fsl_i2c drivers. These symbols became unused when the drivers were migrated over to use the of_platform bus. Signed-off-by: Grant Likely Signed-off-by: Kumar Gala --- include/linux/fsl_devices.h | 22 ---------------------- 1 file changed, 22 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h index d9051d717d27..4953709f687a 100644 --- a/include/linux/fsl_devices.h +++ b/include/linux/fsl_devices.h @@ -18,7 +18,6 @@ #define _FSL_DEVICE_H_ #include -#include /* * Some conventions on how we handle peripherals on Freescale chips @@ -44,27 +43,6 @@ * */ -struct gianfar_platform_data { - /* device specific information */ - u32 device_flags; - char bus_id[BUS_ID_SIZE]; - phy_interface_t interface; -}; - -struct gianfar_mdio_data { - /* board specific information */ - int irq[32]; -}; - -/* Flags in gianfar_platform_data */ -#define FSL_GIANFAR_BRD_HAS_PHY_INTR 0x00000001 /* set or use a timer */ -#define FSL_GIANFAR_BRD_IS_REDUCED 0x00000002 /* Set if RGMII, RMII */ - -struct fsl_i2c_platform_data { - /* device specific information */ - u32 device_flags; -}; - /* Flags related to I2C device features */ #define FSL_I2C_DEV_SEPARATE_DFSRR 0x00000001 #define FSL_I2C_DEV_CLOCK_5200 0x00000002 -- cgit v1.2.3 From 9756b15e1b58453a6fd54b85c1ad8515209e10bb Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 30 Mar 2009 20:37:20 -0700 Subject: irq: fix cpumask memory leak on offstack cpumask kernels Need to free the old cpumask for affinity and pending_mask. Signed-off-by: Yinghai Lu Acked-by: Rusty Russell LKML-Reference: <49D18FF0.50707@kernel.org> Signed-off-by: Ingo Molnar --- include/linux/irq.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'include/linux') diff --git a/include/linux/irq.h b/include/linux/irq.h index 974890b3c52f..99d147efe399 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -482,6 +482,16 @@ static inline void init_copy_desc_masks(struct irq_desc *old_desc, #endif } +static inline void free_desc_masks(struct irq_desc *old_desc, + struct irq_desc *new_desc) +{ + free_cpumask_var(old_desc->affinity); + +#ifdef CONFIG_GENERIC_PENDING_IRQ + free_cpumask_var(old_desc->pending_mask); +#endif +} + #else /* !CONFIG_SMP */ static inline bool init_alloc_desc_masks(struct irq_desc *desc, int cpu, @@ -495,6 +505,10 @@ static inline void init_copy_desc_masks(struct irq_desc *old_desc, { } +static inline void free_desc_masks(struct irq_desc *old_desc, + struct irq_desc *new_desc) +{ +} #endif /* CONFIG_SMP */ #endif /* _LINUX_IRQ_H */ -- cgit v1.2.3 From 296ccb086dfb89b5b8d73ef08c795ffdff12a597 Mon Sep 17 00:00:00 2001 From: Yuji Shimada Date: Fri, 3 Apr 2009 16:41:46 +0900 Subject: PCI: Setup disabled bridges even if buses are added This patch sets up disabled bridges even if buses have already been added. pci_assign_unassigned_resources is called after buses are added. pci_assign_unassigned_resources calls pci_bus_assign_resources. pci_bus_assign_resources calls pci_setup_bridge to configure BARs of bridges. Currently pci_setup_bridge returns immediately if the bus have already been added. So pci_assign_unassigned_resources can't configure BARs of bridges that were added in a disabled state; this patch fixes the issue. On logical hot-add, we need to prevent the kernel from re-initializing bridges that have already been initialized. To achieve this, pci_setup_bridge returns immediately if the bridge have already been enabled. We don't need to check whether the specified bus is a root bus or not. pci_setup_bridge is not called on a root bus, because a root bus does not have a bridge. The patch adds a new helper function, pci_is_enabled. I made the function name similar to pci_is_managed. The codes which use enable_cnt directly are changed to use pci_is_enabled. Acked-by: Alex Chiang Signed-off-by: Yuji Shimada Signed-off-by: Jesse Barnes --- include/linux/pci.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index a7fe4bbd7ff1..72698d89e767 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -674,6 +674,11 @@ int __must_check pci_reenable_device(struct pci_dev *); int __must_check pcim_enable_device(struct pci_dev *pdev); void pcim_pin_device(struct pci_dev *pdev); +static inline int pci_is_enabled(struct pci_dev *pdev) +{ + return (atomic_read(&pdev->enable_cnt) > 0); +} + static inline int pci_is_managed(struct pci_dev *pdev) { return pdev->is_managed; -- cgit v1.2.3 From 0c659b82d11eaf5e1bee1f2bcb9994b9d09d175c Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Thu, 2 Apr 2009 10:37:25 -0400 Subject: ata: Add TRIM infrastructure This is common code shared between the IDE and libata implementations Signed-off-by: David Woodhouse Signed-off-by: Matthew Wilcox Signed-off-by: Jeff Garzik --- include/linux/ata.h | 41 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ata.h b/include/linux/ata.h index 6617c9f8f2ca..cb79b7a208e1 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -29,6 +29,8 @@ #ifndef __LINUX_ATA_H__ #define __LINUX_ATA_H__ +#include +#include #include #include @@ -91,6 +93,7 @@ enum { ATA_ID_CFA_POWER = 160, ATA_ID_CFA_KEY_MGMT = 162, ATA_ID_CFA_MODES = 163, + ATA_ID_DATA_SET_MGMT = 169, ATA_ID_ROT_SPEED = 217, ATA_ID_PIO4 = (1 << 1), @@ -248,6 +251,7 @@ enum { ATA_CMD_SMART = 0xB0, ATA_CMD_MEDIA_LOCK = 0xDE, ATA_CMD_MEDIA_UNLOCK = 0xDF, + ATA_CMD_DSM = 0x06, /* marked obsolete in the ATA/ATAPI-7 spec */ ATA_CMD_RESTORE = 0x10, @@ -321,6 +325,9 @@ enum { ATA_SMART_READ_VALUES = 0xD0, ATA_SMART_READ_THRESHOLDS = 0xD1, + /* feature values for Data Set Management */ + ATA_DSM_TRIM = 0x01, + /* password used in LBA Mid / LBA High for executing SMART commands */ ATA_SMART_LBAM_PASS = 0x4F, ATA_SMART_LBAH_PASS = 0xC2, @@ -723,6 +730,14 @@ static inline int ata_id_has_unload(const u16 *id) return 0; } +static inline int ata_id_has_trim(const u16 *id) +{ + if (ata_id_major_version(id) >= 7 && + (id[ATA_ID_DATA_SET_MGMT] & 1)) + return 1; + return 0; +} + static inline int ata_id_current_chs_valid(const u16 *id) { /* For ATA-1 devices, if the INITIALIZE DEVICE PARAMETERS command @@ -863,6 +878,32 @@ static inline void ata_id_to_hd_driveid(u16 *id) #endif } +/* + * Write up to 'max' LBA Range Entries to the buffer that will cover the + * extent from sector to sector + count. This is used for TRIM and for + * ADD LBA(S) TO NV CACHE PINNED SET. + */ +static inline unsigned ata_set_lba_range_entries(void *_buffer, unsigned max, + u64 sector, unsigned long count) +{ + __le64 *buffer = _buffer; + unsigned i = 0; + + while (i < max) { + u64 entry = sector | + ((u64)(count > 0xffff ? 0xffff : count) << 48); + buffer[i++] = __cpu_to_le64(entry); + if (count <= 0xffff) + break; + count -= 0xffff; + sector += 0xffff; + } + + max = ALIGN(i * 8, 512); + memset(buffer + i, 0, max - i * 8); + return max; +} + static inline int is_multi_taskfile(struct ata_taskfile *tf) { return (tf->command == ATA_CMD_READ_MULTI) || -- cgit v1.2.3 From e0d3bafd02586cfde286c320f56906fd9fa8d256 Mon Sep 17 00:00:00 2001 From: Sri Deevi Date: Tue, 3 Mar 2009 14:37:50 -0300 Subject: V4L/DVB (10954): Add cx231xx USB driver Signed-off-by: Srinivasa Deevi [mchehab@redhat.com: Remove the Kconfig changes, to avoid git breakages] Signed-off-by: Mauro Carvalho Chehab --- include/linux/i2c-id.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h index f27604af8378..f9d48c9ad5d0 100644 --- a/include/linux/i2c-id.h +++ b/include/linux/i2c-id.h @@ -88,6 +88,7 @@ #define I2C_HW_B_CX2341X 0x010020 /* Conexant CX2341X MPEG encoder cards */ #define I2C_HW_B_CX23885 0x010022 /* conexant 23885 based tv cards (bus1) */ #define I2C_HW_B_AU0828 0x010023 /* auvitek au0828 usb bridge */ +#define I2C_HW_B_CX231XX 0x010024 /* Conexant CX231XX USB based cards */ #define I2C_HW_B_HDPVR 0x010025 /* Hauppauge HD PVR */ /* --- SGI adapters */ -- cgit v1.2.3 From dfa76fa2824967c0ec196fbcba36d3e74b66d3aa Mon Sep 17 00:00:00 2001 From: Adam Baker Date: Sun, 29 Mar 2009 19:17:10 -0300 Subject: V4L/DVB (11387): Sensor orientation reporting Add support to the SQ-905 driver to pass back to user space the sensor orientation information obtained from the camera during init. Modifies gspca and the videodev2.h header to create the necessary API. [mchehab@redhat.com: Changed "Output is" to "Frames are" at the comments, as suggested at LMML] Signed-off-by: Adam Baker Signed-off-by: Mauro Carvalho Chehab --- include/linux/videodev2.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 139d234923cd..ebb2ea6b4995 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -737,6 +737,11 @@ struct v4l2_input { #define V4L2_IN_ST_NO_SIGNAL 0x00000002 #define V4L2_IN_ST_NO_COLOR 0x00000004 +/* field 'status' - sensor orientation */ +/* If sensor is mounted upside down set both bits */ +#define V4L2_IN_ST_HFLIP 0x00000010 /* Frames are flipped horizontally */ +#define V4L2_IN_ST_VFLIP 0x00000020 /* Frames are flipped vertically */ + /* field 'status' - analog */ #define V4L2_IN_ST_NO_H_LOCK 0x00000100 /* No horizontal sync lock */ #define V4L2_IN_ST_COLOR_KILL 0x00000200 /* Color killer is active */ -- cgit v1.2.3 From 26308eab69aa193f7b3fb50764a64ae14544a39b Mon Sep 17 00:00:00 2001 From: Jerome Marchand Date: Fri, 27 Mar 2009 10:31:51 +0100 Subject: block: fix inconsistency in I/O stat accounting code This forces in_flight to be zero when turning off or on the I/O stat accounting and stops updating I/O stats in attempt_merge() when accounting is turned off. Signed-off-by: Jerome Marchand Signed-off-by: Jens Axboe --- include/linux/elevator.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/elevator.h b/include/linux/elevator.h index 7a204256b155..c59b769f62b0 100644 --- a/include/linux/elevator.h +++ b/include/linux/elevator.h @@ -116,6 +116,7 @@ extern void elv_abort_queue(struct request_queue *); extern void elv_completed_request(struct request_queue *, struct request *); extern int elv_set_request(struct request_queue *, struct request *, gfp_t); extern void elv_put_request(struct request_queue *, struct request *); +extern void elv_drain_elevator(struct request_queue *); /* * io scheduler registration -- cgit v1.2.3 From 3fbed4c61abd8458896e38633d10110cb5a589d4 Mon Sep 17 00:00:00 2001 From: unsik Kim Date: Thu, 2 Apr 2009 12:50:58 -0700 Subject: mflash: initial support This driver supports mflash IO mode for linux. Mflash is embedded flash drive and mainly targeted mobile and consumer electronic devices. Internally, mflash has nand flash and other hardware logics and supports 2 different operation (ATA, IO) modes. ATA mode doesn't need any new driver and currently works well under standard IDE subsystem. Actually it's one chip SSD. IO mode is ATA-like custom mode for the host that doesn't have IDE interface. Followings are brief descriptions about IO mode. A. IO mode based on ATA protocol and uses some custom command. (read confirm, write confirm) B. IO mode uses SRAM bus interface. C. IO mode supports 4kB boot area, so host can boot from mflash. This driver is quitely similar to a standard ATA driver, but because of following reasons it is currently seperated with ATA layer. 1. ATA layer deals standard ATA protocol. ATA layer have many low- level device specific interface, but data transfer keeps ATA rule. But, mflash IO mode doesn't. 2. Even though currently not used in mflash driver code, mflash has some custom command and modes. (nand fusing, firmware patch, etc) If this feature supported in linux kernel, ATA layer more altered. 3. Currently PATA platform device driver doesn't support interrupt. (I'm not sure) But, mflash uses interrupt (polling mode is just for debug). 4. mflash is somewhat under-develop product. Even though some company already using mflash their own product, I think more time is needed for standardization of custom command and mode. That time (maybe October) I will talk to with ATA people. If they accept integration, I will integrate. Signed-off-by: unsik Kim Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- include/linux/mg_disk.h | 206 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 206 insertions(+) create mode 100644 include/linux/mg_disk.h (limited to 'include/linux') diff --git a/include/linux/mg_disk.h b/include/linux/mg_disk.h new file mode 100644 index 000000000000..1f76b1ebf627 --- /dev/null +++ b/include/linux/mg_disk.h @@ -0,0 +1,206 @@ +/* + * include/linux/mg_disk.c + * + * Support for the mGine m[g]flash IO mode. + * Based on legacy hd.c + * + * (c) 2008 mGine Co.,LTD + * (c) 2008 unsik Kim + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __MG_DISK_H__ +#define __MG_DISK_H__ + +#include +#include + +/* name for block device */ +#define MG_DISK_NAME "mgd" +/* name for platform device */ +#define MG_DEV_NAME "mg_disk" + +#define MG_DISK_MAJ 0 +#define MG_DISK_MAX_PART 16 +#define MG_SECTOR_SIZE 512 +#define MG_MAX_SECTS 256 + +/* Register offsets */ +#define MG_BUFF_OFFSET 0x8000 +#define MG_STORAGE_BUFFER_SIZE 0x200 +#define MG_REG_OFFSET 0xC000 +#define MG_REG_FEATURE (MG_REG_OFFSET + 2) /* write case */ +#define MG_REG_ERROR (MG_REG_OFFSET + 2) /* read case */ +#define MG_REG_SECT_CNT (MG_REG_OFFSET + 4) +#define MG_REG_SECT_NUM (MG_REG_OFFSET + 6) +#define MG_REG_CYL_LOW (MG_REG_OFFSET + 8) +#define MG_REG_CYL_HIGH (MG_REG_OFFSET + 0xA) +#define MG_REG_DRV_HEAD (MG_REG_OFFSET + 0xC) +#define MG_REG_COMMAND (MG_REG_OFFSET + 0xE) /* write case */ +#define MG_REG_STATUS (MG_REG_OFFSET + 0xE) /* read case */ +#define MG_REG_DRV_CTRL (MG_REG_OFFSET + 0x10) +#define MG_REG_BURST_CTRL (MG_REG_OFFSET + 0x12) + +/* "Drive Select/Head Register" bit values */ +#define MG_REG_HEAD_MUST_BE_ON 0xA0 /* These 2 bits are always on */ +#define MG_REG_HEAD_DRIVE_MASTER (0x00 | MG_REG_HEAD_MUST_BE_ON) +#define MG_REG_HEAD_DRIVE_SLAVE (0x10 | MG_REG_HEAD_MUST_BE_ON) +#define MG_REG_HEAD_LBA_MODE (0x40 | MG_REG_HEAD_MUST_BE_ON) + + +/* "Device Control Register" bit values */ +#define MG_REG_CTRL_INTR_ENABLE 0x0 +#define MG_REG_CTRL_INTR_DISABLE (0x1<<1) +#define MG_REG_CTRL_RESET (0x1<<2) +#define MG_REG_CTRL_INTR_POLA_ACTIVE_HIGH 0x0 +#define MG_REG_CTRL_INTR_POLA_ACTIVE_LOW (0x1<<4) +#define MG_REG_CTRL_DPD_POLA_ACTIVE_LOW 0x0 +#define MG_REG_CTRL_DPD_POLA_ACTIVE_HIGH (0x1<<5) +#define MG_REG_CTRL_DPD_DISABLE 0x0 +#define MG_REG_CTRL_DPD_ENABLE (0x1<<6) + +/* Status register bit */ +/* error bit in status register */ +#define MG_REG_STATUS_BIT_ERROR 0x01 +/* corrected error in status register */ +#define MG_REG_STATUS_BIT_CORRECTED_ERROR 0x04 +/* data request bit in status register */ +#define MG_REG_STATUS_BIT_DATA_REQ 0x08 +/* DSC - Drive Seek Complete */ +#define MG_REG_STATUS_BIT_SEEK_DONE 0x10 +/* DWF - Drive Write Fault */ +#define MG_REG_STATUS_BIT_WRITE_FAULT 0x20 +#define MG_REG_STATUS_BIT_READY 0x40 +#define MG_REG_STATUS_BIT_BUSY 0x80 + +/* handy status */ +#define MG_STAT_READY (MG_REG_STATUS_BIT_READY | MG_REG_STATUS_BIT_SEEK_DONE) +#define MG_READY_OK(s) (((s) & (MG_STAT_READY | \ + (MG_REG_STATUS_BIT_BUSY | \ + MG_REG_STATUS_BIT_WRITE_FAULT | \ + MG_REG_STATUS_BIT_ERROR))) == MG_STAT_READY) + +/* Error register */ +#define MG_REG_ERR_AMNF 0x01 +#define MG_REG_ERR_ABRT 0x04 +#define MG_REG_ERR_IDNF 0x10 +#define MG_REG_ERR_UNC 0x40 +#define MG_REG_ERR_BBK 0x80 + +/* error code for others */ +#define MG_ERR_NONE 0 +#define MG_ERR_TIMEOUT 0x100 +#define MG_ERR_INIT_STAT 0x101 +#define MG_ERR_TRANSLATION 0x102 +#define MG_ERR_CTRL_RST 0x103 +#define MG_ERR_INV_STAT 0x104 +#define MG_ERR_RSTOUT 0x105 + +#define MG_MAX_ERRORS 6 /* Max read/write errors */ + +/* command */ +#define MG_CMD_RD 0x20 +#define MG_CMD_WR 0x30 +#define MG_CMD_SLEEP 0x99 +#define MG_CMD_WAKEUP 0xC3 +#define MG_CMD_ID 0xEC +#define MG_CMD_WR_CONF 0x3C +#define MG_CMD_RD_CONF 0x40 + +/* operation mode */ +#define MG_OP_CASCADE (1 << 0) +#define MG_OP_CASCADE_SYNC_RD (1 << 1) +#define MG_OP_CASCADE_SYNC_WR (1 << 2) +#define MG_OP_INTERLEAVE (1 << 3) + +/* synchronous */ +#define MG_BURST_LAT_4 (3 << 4) +#define MG_BURST_LAT_5 (4 << 4) +#define MG_BURST_LAT_6 (5 << 4) +#define MG_BURST_LAT_7 (6 << 4) +#define MG_BURST_LAT_8 (7 << 4) +#define MG_BURST_LEN_4 (1 << 1) +#define MG_BURST_LEN_8 (2 << 1) +#define MG_BURST_LEN_16 (3 << 1) +#define MG_BURST_LEN_32 (4 << 1) +#define MG_BURST_LEN_CONT (0 << 1) + +/* timeout value (unit: ms) */ +#define MG_TMAX_CONF_TO_CMD 1 +#define MG_TMAX_WAIT_RD_DRQ 10 +#define MG_TMAX_WAIT_WR_DRQ 500 +#define MG_TMAX_RST_TO_BUSY 10 +#define MG_TMAX_HDRST_TO_RDY 500 +#define MG_TMAX_SWRST_TO_RDY 500 +#define MG_TMAX_RSTOUT 3000 + +/* device attribution */ +/* use mflash as boot device */ +#define MG_BOOT_DEV (1 << 0) +/* use mflash as storage device */ +#define MG_STORAGE_DEV (1 << 1) +/* same as MG_STORAGE_DEV, but bootloader already done reset sequence */ +#define MG_STORAGE_DEV_SKIP_RST (1 << 2) + +#define MG_DEV_MASK (MG_BOOT_DEV | MG_STORAGE_DEV | MG_STORAGE_DEV_SKIP_RST) + +/* names of GPIO resource */ +#define MG_RST_PIN "mg_rst" +/* except MG_BOOT_DEV, reset-out pin should be assigned */ +#define MG_RSTOUT_PIN "mg_rstout" + +/* private driver data */ +struct mg_drv_data { + /* disk resource */ + u32 use_polling; + + /* device attribution */ + u32 dev_attr; + + /* internally used */ + struct mg_host *host; +}; + +/* main structure for mflash driver */ +struct mg_host { + struct device *dev; + + struct request_queue *breq; + spinlock_t lock; + struct gendisk *gd; + + struct timer_list timer; + void (*mg_do_intr) (struct mg_host *); + + u16 id[ATA_ID_WORDS]; + + u16 cyls; + u16 heads; + u16 sectors; + u32 n_sectors; + u32 nres_sectors; + + void __iomem *dev_base; + unsigned int irq; + unsigned int rst; + unsigned int rstout; + + u32 major; + u32 error; +}; + +/* + * Debugging macro and defines + */ +#undef DO_MG_DEBUG +#ifdef DO_MG_DEBUG +# define MG_DBG(fmt, args...) \ + printk(KERN_DEBUG "%s:%d "fmt, __func__, __LINE__, ##args) +#else /* CONFIG_MG_DEBUG */ +# define MG_DBG(fmt, args...) do { } while (0) +#endif /* CONFIG_MG_DEBUG */ + +#endif -- cgit v1.2.3 From 2385327725419a76cfbca7258abd95908b8ba9eb Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 7 Apr 2009 08:59:11 +0200 Subject: block: remove unused REQ_UNPLUG The request inherits the unplug flag from the bio, but it isn't actually used. The bio flag stops at __make_request(), which tells it to unplug after submission. Passing it on to the request doesn't make any sense. Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index e03660964e02..ba54c834a590 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -117,7 +117,6 @@ enum rq_flag_bits { __REQ_RW_META, /* metadata io request */ __REQ_COPY_USER, /* contains copies of user pages */ __REQ_INTEGRITY, /* integrity metadata has been remapped */ - __REQ_UNPLUG, /* unplug queue on submission */ __REQ_NOIDLE, /* Don't anticipate more IO after this one */ __REQ_NR_BITS, /* stops here */ }; @@ -145,7 +144,6 @@ enum rq_flag_bits { #define REQ_RW_META (1 << __REQ_RW_META) #define REQ_COPY_USER (1 << __REQ_COPY_USER) #define REQ_INTEGRITY (1 << __REQ_INTEGRITY) -#define REQ_UNPLUG (1 << __REQ_UNPLUG) #define REQ_NOIDLE (1 << __REQ_NOIDLE) #define BLK_MAX_CDB 16 -- cgit v1.2.3 From b486ddbc0fb8127ccf2c820cfbf0b98e6f8a4e97 Mon Sep 17 00:00:00 2001 From: Oskar Schirmer Date: Thu, 2 Apr 2009 13:19:07 +0200 Subject: i2c: xtensa s6000 i2c driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Support for the s6000 on-chip i2c controller. Signed-off-by: Oskar Schirmer Signed-off-by: Daniel Glöckner Signed-off-by: Ben Dooks --- include/linux/i2c/s6000.h | 10 ++++++++++ 1 file changed, 10 insertions(+) create mode 100644 include/linux/i2c/s6000.h (limited to 'include/linux') diff --git a/include/linux/i2c/s6000.h b/include/linux/i2c/s6000.h new file mode 100644 index 000000000000..d9b34bfdae76 --- /dev/null +++ b/include/linux/i2c/s6000.h @@ -0,0 +1,10 @@ +#ifndef __LINUX_I2C_S6000_H +#define __LINUX_I2C_S6000_H + +struct s6_i2c_platform_data { + const char *clock; /* the clock to use */ + int bus_num; /* the bus number to register */ +}; + +#endif + -- cgit v1.2.3 From 5ac9f62267dc92c7735c642a5942d9e6c1190308 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 25 Mar 2009 20:55:00 -0400 Subject: function-graph: add proper initialization for init task Impact: fix to crash going to kexec The init task did not properly initialize the function graph pointers. Altough these pointers are NULL, they can not be assumed to be NULL for the init task, and must still be properly initialize. This usually is not an issue since a problem only arises when a task exits, and the init tasks do not usually exit. But when doing tests with kexec, the init tasks do exit, and the bug appears. This patch properly initializes the init tasks function graph data structures. Reported-and-Tested-by: Yinghai Lu LKML-Reference: Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar --- include/linux/ftrace.h | 8 ++++++-- include/linux/init_task.h | 2 ++ 2 files changed, 8 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index 015a3d22cf74..da5405dce347 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -356,6 +356,9 @@ struct ftrace_graph_ret { #ifdef CONFIG_FUNCTION_GRAPH_TRACER +/* for init task */ +#define INIT_FTRACE_GRAPH .ret_stack = NULL + /* * Stack of return addresses for functions * of a thread. @@ -430,10 +433,11 @@ static inline void unpause_graph_tracing(void) { atomic_dec(¤t->tracing_graph_pause); } -#else +#else /* !CONFIG_FUNCTION_GRAPH_TRACER */ #define __notrace_funcgraph #define __irq_entry +#define INIT_FTRACE_GRAPH static inline void ftrace_graph_init_task(struct task_struct *t) { } static inline void ftrace_graph_exit_task(struct task_struct *t) { } @@ -445,7 +449,7 @@ static inline int task_curr_ret_stack(struct task_struct *tsk) static inline void pause_graph_tracing(void) { } static inline void unpause_graph_tracing(void) { } -#endif +#endif /* CONFIG_FUNCTION_GRAPH_TRACER */ #ifdef CONFIG_TRACING #include diff --git a/include/linux/init_task.h b/include/linux/init_task.h index e752d973fa21..cada05447bc8 100644 --- a/include/linux/init_task.h +++ b/include/linux/init_task.h @@ -5,6 +5,7 @@ #include #include #include +#include #include #include #include @@ -184,6 +185,7 @@ extern struct cred init_cred; INIT_IDS \ INIT_TRACE_IRQFLAGS \ INIT_LOCKDEP \ + INIT_FTRACE_GRAPH \ } -- cgit v1.2.3 From d9ad8bc0ca823705413f75b50c442a88cc518b35 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Sun, 5 Apr 2009 16:20:02 +0200 Subject: branch tracer: Fix for enabling branch profiling makes sparse unusable One of the changes between kernels 2.6.28 and 2.6.29 is that a branch profiler has been added for if() statements. Unfortunately this patch makes the sparse output unusable with CONFIG_TRACE_BRANCH_PROFILING=y: when branch profiling is enabled, sparse prints so much false positives that the real issues are no longer visible. This behavior can be reproduced as follows: * enable CONFIG_TRACE_BRANCH_PROFILING, e.g. by running make allyesconfig or make allmodconfig. * run make C=2 Result: a huge number of the following sparse warnings. ... include/linux/cpumask.h:547:2: warning: symbol '______r' shadows an earlier one include/linux/cpumask.h:547:2: originally declared here ... The patch below fixes this by disabling branch profiling while analyzing the kernel code with sparse. See also: * http://lkml.org/lkml/2008/11/21/18 * http://bugzilla.kernel.org/show_bug.cgi?id=12925 Signed-off-by: Bart Van Assche Cc: Andrew Morton Cc: Steven Rostedt LKML-Reference: <200904051620.02311.bart.vanassche@gmail.com> Signed-off-by: Ingo Molnar --- include/linux/compiler.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/compiler.h b/include/linux/compiler.h index 6faa7e549de4..8872ad6dd89b 100644 --- a/include/linux/compiler.h +++ b/include/linux/compiler.h @@ -76,7 +76,8 @@ struct ftrace_branch_data { * Note: DISABLE_BRANCH_PROFILING can be used by special lowlevel code * to disable branch tracing on a per file basis. */ -#if defined(CONFIG_TRACE_BRANCH_PROFILING) && !defined(DISABLE_BRANCH_PROFILING) +#if defined(CONFIG_TRACE_BRANCH_PROFILING) \ + && !defined(DISABLE_BRANCH_PROFILING) && !defined(__CHECKER__) void ftrace_likely_update(struct ftrace_branch_data *f, int val, int expect); #define likely_notrace(x) __builtin_expect(!!(x), 1) -- cgit v1.2.3 From ab3c9c686e22ab264269337ce7b75d9760211198 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 7 Apr 2009 07:59:41 -0700 Subject: branch tracer, intel-iommu: fix build with CONFIG_BRANCH_TRACER=y Fix the branch tracer barfing on comma statements within if () statements. Signed-off-by: Ingo Molnar --- include/linux/compiler.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/compiler.h b/include/linux/compiler.h index 8872ad6dd89b..37bcb50a4d7c 100644 --- a/include/linux/compiler.h +++ b/include/linux/compiler.h @@ -115,7 +115,9 @@ void ftrace_likely_update(struct ftrace_branch_data *f, int val, int expect); * "Define 'is'", Bill Clinton * "Define 'if'", Steven Rostedt */ -#define if(cond) if (__builtin_constant_p((cond)) ? !!(cond) : \ +#define if(cond, ...) __trace_if( (cond , ## __VA_ARGS__) ) +#define __trace_if(cond) \ + if (__builtin_constant_p((cond)) ? !!(cond) : \ ({ \ int ______r; \ static struct ftrace_branch_data \ -- cgit v1.2.3 From fafd688e4c0c34da0f3de909881117d374e4c7af Mon Sep 17 00:00:00 2001 From: Peter W Morreale Date: Mon, 6 Apr 2009 19:00:29 -0700 Subject: mm: add /proc controls for pdflush threads Add /proc entries to give the admin the ability to control the minimum and maximum number of pdflush threads. This allows finer control of pdflush on both large and small machines. The rationale is simply one size does not fit all. Admins on large and/or small systems may want to tune the min/max pdflush thread count to best suit their needs. Right now the min/max is hardcoded to 2/8. While probably a fair estimate for smaller machines, large machines with large numbers of CPUs and large numbers of filesystems/block devices may benefit from larger numbers of threads working on different block devices. Even if the background flushing algorithm is radically changed, it is still likely that multiple threads will be involved and admins would still desire finer control on the min/max other than to have to recompile the kernel. The patch adds '/proc/sys/vm/nr_pdflush_threads_min' and '/proc/sys/vm/nr_pdflush_threads_max' with r/w permissions. The minimum value for nr_pdflush_threads_min is 1 and the maximum value is the current value of nr_pdflush_threads_max. This minimum is required since additional thread creation is performed in a pdflush thread itself. The minimum value for nr_pdflush_threads_max is the current value of nr_pdflush_threads_min and the maximum value can be 1000. Documentation/sysctl/vm.txt is also updated. [akpm@linux-foundation.org: fix comment, fix whitespace, use __read_mostly] Signed-off-by: Peter W Morreale Reviewed-by: Rik van Riel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/writeback.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/writeback.h b/include/linux/writeback.h index 93445477f86a..9c1ed1fb6ddb 100644 --- a/include/linux/writeback.h +++ b/include/linux/writeback.h @@ -168,6 +168,8 @@ void writeback_set_ratelimit(void); /* pdflush.c */ extern int nr_pdflush_threads; /* Global so it can be exported to sysctl read-only. */ +extern int nr_pdflush_threads_max; /* Global so it can be exported to sysctl */ +extern int nr_pdflush_threads_min; /* Global so it can be exported to sysctl */ #endif /* WRITEBACK_H */ -- cgit v1.2.3 From fd5e191e7610eb7ecb5e35b2045ceb6554bea15a Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Mon, 6 Apr 2009 19:00:56 -0700 Subject: SPI: add dma_alignment field to spi_master Some SPI controllers have restrictions on DMAable buffers alignemt. Currently if the buffer supplied by protocol driver is not properly aligned, the controller silently performs transfer in PIO mode. Addition of dma_alignment field to spi_master allows protocol drivers to perform proper alignment. Signed-off-by: Mike Rapoport Cc: Bryan Wu Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/spi/spi.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 68bb1c501d0d..2cc43fa380cb 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -204,6 +204,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * SPI slaves, and are numbered from zero to num_chipselects. * each slave has a chipselect signal, but it's common that not * every chipselect is connected to a slave. + * @dma_alignment: SPI controller constraint on DMA buffers alignment. * @setup: updates the device mode and clocking records used by a * device's SPI controller; protocol code may call this. This * must fail if an unrecognized or unsupported mode is requested. @@ -239,6 +240,11 @@ struct spi_master { */ u16 num_chipselect; + /* some SPI controllers pose alignment requirements on DMAable + * buffers; let protocol drivers know about these requirements. + */ + u16 dma_alignment; + /* setup mode and clock, etc (spi driver may call many times) */ int (*setup)(struct spi_device *spi); -- cgit v1.2.3 From cc00e9cfe0e5c4c31057c722e49fdf2c76dd5953 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Mon, 6 Apr 2009 19:01:00 -0700 Subject: kprobes: cleanup comment style in kprobes.h Fix comment style in kprobes.h. Signed-off-by: Masami Hiramatsu Acked-by: Ananth N Mavinakayanahalli Cc: Anil S Keshavamurthy Cc: David S. Miller Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kprobes.h | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/kprobes.h b/include/linux/kprobes.h index 2ec6cc14a114..39826a678364 100644 --- a/include/linux/kprobes.h +++ b/include/linux/kprobes.h @@ -94,12 +94,16 @@ struct kprobe { /* Called after addr is executed, unless... */ kprobe_post_handler_t post_handler; - /* ... called if executing addr causes a fault (eg. page fault). - * Return 1 if it handled fault, otherwise kernel will see it. */ + /* + * ... called if executing addr causes a fault (eg. page fault). + * Return 1 if it handled fault, otherwise kernel will see it. + */ kprobe_fault_handler_t fault_handler; - /* ... called if breakpoint trap occurs in probe handler. - * Return 1 if it handled break, otherwise kernel will see it. */ + /* + * ... called if breakpoint trap occurs in probe handler. + * Return 1 if it handled break, otherwise kernel will see it. + */ kprobe_break_handler_t break_handler; /* Saved opcode (which has been replaced with breakpoint) */ -- cgit v1.2.3 From de5bd88d5a5cce3cacea904d3503e5ebdb3852a2 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Mon, 6 Apr 2009 19:01:02 -0700 Subject: kprobes: support per-kprobe disabling Add disable_kprobe() and enable_kprobe() to disable/enable kprobes temporarily. disable_kprobe() asynchronously disables probe handlers of specified kprobe. So, after calling it, some handlers can be called at a while. enable_kprobe() enables specified kprobe. aggr_pre_handler and aggr_post_handler check disabled probes. On the other hand aggr_break_handler and aggr_fault_handler don't check it because these handlers will be called while executing pre or post handlers and usually those help error handling. Signed-off-by: Masami Hiramatsu Acked-by: Ananth N Mavinakayanahalli Cc: Anil S Keshavamurthy Cc: David S. Miller Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kprobes.h | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/kprobes.h b/include/linux/kprobes.h index 39826a678364..1071cfddddc9 100644 --- a/include/linux/kprobes.h +++ b/include/linux/kprobes.h @@ -112,18 +112,28 @@ struct kprobe { /* copy of the original instruction */ struct arch_specific_insn ainsn; - /* Indicates various status flags. Protected by kprobe_mutex. */ + /* + * Indicates various status flags. + * Protected by kprobe_mutex after this kprobe is registered. + */ u32 flags; }; /* Kprobe status flags */ #define KPROBE_FLAG_GONE 1 /* breakpoint has already gone */ +#define KPROBE_FLAG_DISABLED 2 /* probe is temporarily disabled */ +/* Has this kprobe gone ? */ static inline int kprobe_gone(struct kprobe *p) { return p->flags & KPROBE_FLAG_GONE; } +/* Is this kprobe disabled ? */ +static inline int kprobe_disabled(struct kprobe *p) +{ + return p->flags & (KPROBE_FLAG_DISABLED | KPROBE_FLAG_GONE); +} /* * Special probe type that uses setjmp-longjmp type tricks to resume * execution at a specified entry with a matching prototype corresponding @@ -283,6 +293,9 @@ void unregister_kretprobes(struct kretprobe **rps, int num); void kprobe_flush_task(struct task_struct *tk); void recycle_rp_inst(struct kretprobe_instance *ri, struct hlist_head *head); +int disable_kprobe(struct kprobe *kp); +int enable_kprobe(struct kprobe *kp); + #else /* !CONFIG_KPROBES: */ static inline int kprobes_built_in(void) @@ -349,5 +362,13 @@ static inline void unregister_kretprobes(struct kretprobe **rps, int num) static inline void kprobe_flush_task(struct task_struct *tk) { } +static inline int disable_kprobe(struct kprobe *kp) +{ + return -ENOSYS; +} +static inline int enable_kprobe(struct kprobe *kp) +{ + return -ENOSYS; +} #endif /* CONFIG_KPROBES */ #endif /* _LINUX_KPROBES_H */ -- cgit v1.2.3 From 8f9b15286a8ea49e997e845d02d357ed33ebd090 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Mon, 6 Apr 2009 19:01:02 -0700 Subject: kprobes: support kretprobe and jprobe per-probe disabling Add disable/enable_kretprobe() and disable/enable_jprobe(). Signed-off-by: Masami Hiramatsu Acked-by: Ananth N Mavinakayanahalli Cc: Anil S Keshavamurthy Cc: David S. Miller Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kprobes.h | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'include/linux') diff --git a/include/linux/kprobes.h b/include/linux/kprobes.h index 1071cfddddc9..bcd9c07848be 100644 --- a/include/linux/kprobes.h +++ b/include/linux/kprobes.h @@ -371,4 +371,21 @@ static inline int enable_kprobe(struct kprobe *kp) return -ENOSYS; } #endif /* CONFIG_KPROBES */ +static inline int disable_kretprobe(struct kretprobe *rp) +{ + return disable_kprobe(&rp->kp); +} +static inline int enable_kretprobe(struct kretprobe *rp) +{ + return enable_kprobe(&rp->kp); +} +static inline int disable_jprobe(struct jprobe *jp) +{ + return disable_kprobe(&jp->kp); +} +static inline int enable_jprobe(struct jprobe *jp) +{ + return enable_kprobe(&jp->kp); +} + #endif /* _LINUX_KPROBES_H */ -- cgit v1.2.3 From 909e6d94795654040ed416ac69858d5d2ce66dd3 Mon Sep 17 00:00:00 2001 From: "Serge E. Hallyn" Date: Mon, 6 Apr 2009 19:01:07 -0700 Subject: namespaces: move proc_net_get_sb to a generic fs/super.c helper The mqueuefs filesystem will use this helper as well. Proc's main get_sb could also be made to use it, but that will require a bit more rework. Signed-off-by: Serge E. Hallyn Cc: Cedric Le Goater Cc: Alexey Dobriyan Cc: "David S. Miller" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/fs.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index bce40a2207ee..562d2855cf30 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1699,6 +1699,9 @@ struct file_system_type { struct lock_class_key i_alloc_sem_key; }; +extern int get_sb_ns(struct file_system_type *fs_type, int flags, void *data, + int (*fill_super)(struct super_block *, void *, int), + struct vfsmount *mnt); extern int get_sb_bdev(struct file_system_type *fs_type, int flags, const char *dev_name, void *data, int (*fill_super)(struct super_block *, void *, int), -- cgit v1.2.3 From 614b84cf4e4a920d2af32b8f147ea1e3b8c27ea6 Mon Sep 17 00:00:00 2001 From: "Serge E. Hallyn" Date: Mon, 6 Apr 2009 19:01:08 -0700 Subject: namespaces: mqueue ns: move mqueue_mnt into struct ipc_namespace Move mqueue vfsmount plus a few tunables into the ipc_namespace struct. The CONFIG_IPC_NS boolean and the ipc_namespace struct will serve both the posix message queue namespaces and the SYSV ipc namespaces. The sysctl code will be fixed separately in patch 3. After just this patch, making a change to posix mqueue tunables always changes the values in the initial ipc namespace. Signed-off-by: Cedric Le Goater Signed-off-by: Serge E. Hallyn Cc: Alexey Dobriyan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/ipc_namespace.h | 39 +++++++++++++++++++++++++++++++++++---- 1 file changed, 35 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ipc_namespace.h b/include/linux/ipc_namespace.h index ea330f9e7100..3e6fcacebe8a 100644 --- a/include/linux/ipc_namespace.h +++ b/include/linux/ipc_namespace.h @@ -44,24 +44,55 @@ struct ipc_namespace { int shm_tot; struct notifier_block ipcns_nb; + + /* The kern_mount of the mqueuefs sb. We take a ref on it */ + struct vfsmount *mq_mnt; + + /* # queues in this ns, protected by mq_lock */ + unsigned int mq_queues_count; + + /* next fields are set through sysctl */ + unsigned int mq_queues_max; /* initialized to DFLT_QUEUESMAX */ + unsigned int mq_msg_max; /* initialized to DFLT_MSGMAX */ + unsigned int mq_msgsize_max; /* initialized to DFLT_MSGSIZEMAX */ + }; extern struct ipc_namespace init_ipc_ns; extern atomic_t nr_ipc_ns; -#ifdef CONFIG_SYSVIPC +#if defined(CONFIG_POSIX_MQUEUE) || defined(CONFIG_SYSVIPC) #define INIT_IPC_NS(ns) .ns = &init_ipc_ns, +#else +#define INIT_IPC_NS(ns) +#endif +#ifdef CONFIG_SYSVIPC extern int register_ipcns_notifier(struct ipc_namespace *); extern int cond_register_ipcns_notifier(struct ipc_namespace *); extern void unregister_ipcns_notifier(struct ipc_namespace *); extern int ipcns_notify(unsigned long); - #else /* CONFIG_SYSVIPC */ -#define INIT_IPC_NS(ns) +static inline int register_ipcns_notifier(struct ipc_namespace *ns) +{ return 0; } +static inline int cond_register_ipcns_notifier(struct ipc_namespace *ns) +{ return 0; } +static inline void unregister_ipcns_notifier(struct ipc_namespace *ns) { } +static inline int ipcns_notify(unsigned long l) { return 0; } #endif /* CONFIG_SYSVIPC */ -#if defined(CONFIG_SYSVIPC) && defined(CONFIG_IPC_NS) +#ifdef CONFIG_POSIX_MQUEUE +extern void mq_init_ns(struct ipc_namespace *ns); +/* default values */ +#define DFLT_QUEUESMAX 256 /* max number of message queues */ +#define DFLT_MSGMAX 10 /* max number of messages in each queue */ +#define HARD_MSGMAX (131072/sizeof(void *)) +#define DFLT_MSGSIZEMAX 8192 /* max message size */ +#else +#define mq_init_ns(ns) ((void) 0) +#endif + +#if defined(CONFIG_IPC_NS) extern void free_ipc_ns(struct kref *kref); extern struct ipc_namespace *copy_ipcs(unsigned long flags, struct ipc_namespace *ns); -- cgit v1.2.3 From 7eafd7c74c3f2e67c27621b987b28397110d643f Mon Sep 17 00:00:00 2001 From: "Serge E. Hallyn" Date: Mon, 6 Apr 2009 19:01:10 -0700 Subject: namespaces: ipc namespaces: implement support for posix msqueues Implement multiple mounts of the mqueue file system, and link it to usage of CLONE_NEWIPC. Each ipc ns has a corresponding mqueuefs superblock. When a user does clone(CLONE_NEWIPC) or unshare(CLONE_NEWIPC), the unshare will cause an internal mount of a new mqueuefs sb linked to the new ipc ns. When a user does 'mount -t mqueue mqueue /dev/mqueue', he mounts the mqueuefs superblock. Posix message queues can be worked with both through the mq_* system calls (see mq_overview(7)), and through the VFS through the mqueue mount. Any usage of mq_open() and friends will work with the acting task's ipc namespace. Any actions through the VFS will work with the mqueuefs in which the file was created. So if a user doesn't remount mqueuefs after unshare(CLONE_NEWIPC), mq_open("/ab") will not be reflected in "ls /dev/mqueue". If task a mounts mqueue for ipc_ns:1, then clones task b with a new ipcns, ipcns:2, and then task a is the last task in ipc_ns:1 to exit, then (1) ipc_ns:1 will be freed, (2) it's superblock will live on until task b umounts the corresponding mqueuefs, and vfs actions will continue to succeed, but (3) sb->s_fs_info will be NULL for the sb corresponding to the deceased ipc_ns:1. To make this happen, we must protect the ipc reference count when a) a task exits and drops its ipcns->count, since it might be dropping it to 0 and freeing the ipcns b) a task accesses the ipcns through its mqueuefs interface, since it bumps the ipcns refcount and might race with the last task in the ipcns exiting. So the kref is changed to an atomic_t so we can use atomic_dec_and_lock(&ns->count,mq_lock), and every access to the ipcns through ns = mqueuefs_sb->s_fs_info is protected by the same lock. Signed-off-by: Cedric Le Goater Signed-off-by: Serge E. Hallyn Cc: Alexey Dobriyan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/ipc_namespace.h | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ipc_namespace.h b/include/linux/ipc_namespace.h index 3e6fcacebe8a..3392d50de351 100644 --- a/include/linux/ipc_namespace.h +++ b/include/linux/ipc_namespace.h @@ -25,7 +25,7 @@ struct ipc_ids { }; struct ipc_namespace { - struct kref kref; + atomic_t count; struct ipc_ids ids[3]; int sem_ctls[4]; @@ -61,6 +61,7 @@ struct ipc_namespace { extern struct ipc_namespace init_ipc_ns; extern atomic_t nr_ipc_ns; +extern spinlock_t mq_lock; #if defined(CONFIG_POSIX_MQUEUE) || defined(CONFIG_SYSVIPC) #define INIT_IPC_NS(ns) .ns = &init_ipc_ns, #else @@ -82,18 +83,18 @@ static inline int ipcns_notify(unsigned long l) { return 0; } #endif /* CONFIG_SYSVIPC */ #ifdef CONFIG_POSIX_MQUEUE -extern void mq_init_ns(struct ipc_namespace *ns); +extern int mq_init_ns(struct ipc_namespace *ns); /* default values */ #define DFLT_QUEUESMAX 256 /* max number of message queues */ #define DFLT_MSGMAX 10 /* max number of messages in each queue */ #define HARD_MSGMAX (131072/sizeof(void *)) #define DFLT_MSGSIZEMAX 8192 /* max message size */ #else -#define mq_init_ns(ns) ((void) 0) +static inline int mq_init_ns(struct ipc_namespace *ns) { return 0; } #endif #if defined(CONFIG_IPC_NS) -extern void free_ipc_ns(struct kref *kref); +extern void free_ipc_ns(struct ipc_namespace *ns); extern struct ipc_namespace *copy_ipcs(unsigned long flags, struct ipc_namespace *ns); extern void free_ipcs(struct ipc_namespace *ns, struct ipc_ids *ids, @@ -103,14 +104,11 @@ extern void free_ipcs(struct ipc_namespace *ns, struct ipc_ids *ids, static inline struct ipc_namespace *get_ipc_ns(struct ipc_namespace *ns) { if (ns) - kref_get(&ns->kref); + atomic_inc(&ns->count); return ns; } -static inline void put_ipc_ns(struct ipc_namespace *ns) -{ - kref_put(&ns->kref, free_ipc_ns); -} +extern void put_ipc_ns(struct ipc_namespace *ns); #else static inline struct ipc_namespace *copy_ipcs(unsigned long flags, struct ipc_namespace *ns) -- cgit v1.2.3 From bdc8e5f85f9abe2e7c78dcf39d81f9a97178788b Mon Sep 17 00:00:00 2001 From: "Serge E. Hallyn" Date: Mon, 6 Apr 2009 19:01:11 -0700 Subject: namespaces: mqueue namespace: adapt sysctl Largely inspired from ipc/ipc_sysctl.c. This patch isolates the mqueue sysctl stuff in its own file. [akpm@linux-foundation.org: build fix] Signed-off-by: Cedric Le Goater Signed-off-by: Nadia Derbey Signed-off-by: Serge E. Hallyn Cc: Alexey Dobriyan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/ipc_namespace.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ipc_namespace.h b/include/linux/ipc_namespace.h index 3392d50de351..3bf40e246a80 100644 --- a/include/linux/ipc_namespace.h +++ b/include/linux/ipc_namespace.h @@ -128,4 +128,18 @@ static inline void put_ipc_ns(struct ipc_namespace *ns) { } #endif + +#ifdef CONFIG_POSIX_MQUEUE_SYSCTL + +struct ctl_table_header; +extern struct ctl_table_header *mq_register_sysctl_table(void); + +#else /* CONFIG_POSIX_MQUEUE_SYSCTL */ + +static inline struct ctl_table_header *mq_register_sysctl_table(void) +{ + return NULL; +} + +#endif /* CONFIG_POSIX_MQUEUE_SYSCTL */ #endif -- cgit v1.2.3 From 284901a90a9e0b812ca3f5f852cbbfb60d10249d Mon Sep 17 00:00:00 2001 From: Yang Hongyang Date: Mon, 6 Apr 2009 19:01:15 -0700 Subject: dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/dma-mapping.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h index d7d090d21031..8083b6a36a38 100644 --- a/include/linux/dma-mapping.h +++ b/include/linux/dma-mapping.h @@ -115,7 +115,7 @@ static inline u64 dma_get_mask(struct device *dev) { if (dev && dev->dma_mask && *dev->dma_mask) return *dev->dma_mask; - return DMA_32BIT_MASK; + return DMA_BIT_MASK(32); } extern u64 dma_get_required_mask(struct device *dev); -- cgit v1.2.3 From eed10e39b142eb4d284c8e4c751c0eaaa0bcd707 Mon Sep 17 00:00:00 2001 From: Koji Sato Date: Mon, 6 Apr 2009 19:01:21 -0700 Subject: nilfs2: disk format and userland interface This adds a header file which specifies the on-disk format and ioctl interface of the nilfs2 file system. Signed-off-by: Koji Sato Signed-off-by: Ryusuke Konishi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/nilfs2_fs.h | 854 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 854 insertions(+) create mode 100644 include/linux/nilfs2_fs.h (limited to 'include/linux') diff --git a/include/linux/nilfs2_fs.h b/include/linux/nilfs2_fs.h new file mode 100644 index 000000000000..e38fad2f7c0b --- /dev/null +++ b/include/linux/nilfs2_fs.h @@ -0,0 +1,854 @@ +/* + * nilfs2_fs.h - NILFS2 on-disk structures and common declarations. + * + * Copyright (C) 2005-2008 Nippon Telegraph and Telephone Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Written by Koji Sato + * Ryusuke Konishi + */ +/* + * linux/include/linux/ext2_fs.h + * + * Copyright (C) 1992, 1993, 1994, 1995 + * Remy Card (card@masi.ibp.fr) + * Laboratoire MASI - Institut Blaise Pascal + * Universite Pierre et Marie Curie (Paris VI) + * + * from + * + * linux/include/linux/minix_fs.h + * + * Copyright (C) 1991, 1992 Linus Torvalds + */ + +#ifndef _LINUX_NILFS_FS_H +#define _LINUX_NILFS_FS_H + +#include +#include + +/* + * Inode flags stored in nilfs_inode and on-memory nilfs inode + * + * We define these flags based on ext2-fs because of the + * compatibility reason; to avoid problems in chattr(1) + */ +#define NILFS_SECRM_FL 0x00000001 /* Secure deletion */ +#define NILFS_UNRM_FL 0x00000002 /* Undelete */ +#define NILFS_SYNC_FL 0x00000008 /* Synchronous updates */ +#define NILFS_IMMUTABLE_FL 0x00000010 /* Immutable file */ +#define NILFS_APPEND_FL 0x00000020 /* writes to file may only append */ +#define NILFS_NODUMP_FL 0x00000040 /* do not dump file */ +#define NILFS_NOATIME_FL 0x00000080 /* do not update atime */ +/* Reserved for compression usage... */ +#define NILFS_NOTAIL_FL 0x00008000 /* file tail should not be merged */ +#define NILFS_DIRSYNC_FL 0x00010000 /* dirsync behaviour */ + +#define NILFS_FL_USER_VISIBLE 0x0003DFFF /* User visible flags */ +#define NILFS_FL_USER_MODIFIABLE 0x000380FF /* User modifiable flags */ + + +#define NILFS_INODE_BMAP_SIZE 7 +/** + * struct nilfs_inode - structure of an inode on disk + * @i_blocks: blocks count + * @i_size: size in bytes + * @i_ctime: creation time + * @i_mtime: modification time + * @i_dtime: deletion time + * @i_uid: user id + * @i_gid: group id + * @i_mode: file mode + * @i_links_count: links count + * @i_flags: file flags + * @i_bmap: block mapping + * @i_xattr: extended attributes + * @i_generation: file generation (for NFS) + * @i_pad: padding + */ +struct nilfs_inode { + __le64 i_blocks; + __le64 i_size; + __le64 i_ctime; + __le64 i_mtime; + __le64 i_dtime; + __le32 i_uid; + __le32 i_gid; + __le16 i_mode; + __le16 i_links_count; + __le32 i_flags; + __le64 i_bmap[NILFS_INODE_BMAP_SIZE]; +#define i_device_code i_bmap[0] + __le64 i_xattr; + __le32 i_generation; + __le32 i_pad; +}; + +/** + * struct nilfs_super_root - structure of super root + * @sr_sum: check sum + * @sr_bytes: byte count of the structure + * @sr_flags: flags (reserved) + * @sr_nongc_ctime: write time of the last segment not for cleaner operation + * @sr_dat: DAT file inode + * @sr_cpfile: checkpoint file inode + * @sr_sufile: segment usage file inode + */ +struct nilfs_super_root { + __le32 sr_sum; + __le16 sr_bytes; + __le16 sr_flags; + __le64 sr_nongc_ctime; + struct nilfs_inode sr_dat; + struct nilfs_inode sr_cpfile; + struct nilfs_inode sr_sufile; +}; + +#define NILFS_SR_MDT_OFFSET(inode_size, i) \ + ((unsigned long)&((struct nilfs_super_root *)0)->sr_dat + \ + (inode_size) * (i)) +#define NILFS_SR_DAT_OFFSET(inode_size) NILFS_SR_MDT_OFFSET(inode_size, 0) +#define NILFS_SR_CPFILE_OFFSET(inode_size) NILFS_SR_MDT_OFFSET(inode_size, 1) +#define NILFS_SR_SUFILE_OFFSET(inode_size) NILFS_SR_MDT_OFFSET(inode_size, 2) +#define NILFS_SR_BYTES (sizeof(struct nilfs_super_root)) + +/* + * Maximal mount counts + */ +#define NILFS_DFL_MAX_MNT_COUNT 50 /* 50 mounts */ + +/* + * File system states (sbp->s_state, nilfs->ns_mount_state) + */ +#define NILFS_VALID_FS 0x0001 /* Unmounted cleanly */ +#define NILFS_ERROR_FS 0x0002 /* Errors detected */ +#define NILFS_RESIZE_FS 0x0004 /* Resize required */ + +/* + * Mount flags (sbi->s_mount_opt) + */ +#define NILFS_MOUNT_ERROR_MODE 0x0070 /* Error mode mask */ +#define NILFS_MOUNT_ERRORS_CONT 0x0010 /* Continue on errors */ +#define NILFS_MOUNT_ERRORS_RO 0x0020 /* Remount fs ro on errors */ +#define NILFS_MOUNT_ERRORS_PANIC 0x0040 /* Panic on errors */ +#define NILFS_MOUNT_SNAPSHOT 0x0080 /* Snapshot flag */ +#define NILFS_MOUNT_BARRIER 0x1000 /* Use block barriers */ +#define NILFS_MOUNT_STRICT_ORDER 0x2000 /* Apply strict in-order + semantics also for data */ + + +/** + * struct nilfs_super_block - structure of super block on disk + */ +struct nilfs_super_block { + __le32 s_rev_level; /* Revision level */ + __le16 s_minor_rev_level; /* minor revision level */ + __le16 s_magic; /* Magic signature */ + + __le16 s_bytes; /* Bytes count of CRC calculation + for this structure. s_reserved + is excluded. */ + __le16 s_flags; /* flags */ + __le32 s_crc_seed; /* Seed value of CRC calculation */ + __le32 s_sum; /* Check sum of super block */ + + __le32 s_log_block_size; /* Block size represented as follows + blocksize = + 1 << (s_log_block_size + 10) */ + __le64 s_nsegments; /* Number of segments in filesystem */ + __le64 s_dev_size; /* block device size in bytes */ + __le64 s_first_data_block; /* 1st seg disk block number */ + __le32 s_blocks_per_segment; /* number of blocks per full segment */ + __le32 s_r_segments_percentage; /* Reserved segments percentage */ + + __le64 s_last_cno; /* Last checkpoint number */ + __le64 s_last_pseg; /* disk block addr pseg written last */ + __le64 s_last_seq; /* seq. number of seg written last */ + __le64 s_free_blocks_count; /* Free blocks count */ + + __le64 s_ctime; /* Creation time (execution time of + newfs) */ + __le64 s_mtime; /* Mount time */ + __le64 s_wtime; /* Write time */ + __le16 s_mnt_count; /* Mount count */ + __le16 s_max_mnt_count; /* Maximal mount count */ + __le16 s_state; /* File system state */ + __le16 s_errors; /* Behaviour when detecting errors */ + __le64 s_lastcheck; /* time of last check */ + + __le32 s_checkinterval; /* max. time between checks */ + __le32 s_creator_os; /* OS */ + __le16 s_def_resuid; /* Default uid for reserved blocks */ + __le16 s_def_resgid; /* Default gid for reserved blocks */ + __le32 s_first_ino; /* First non-reserved inode */ + + __le16 s_inode_size; /* Size of an inode */ + __le16 s_dat_entry_size; /* Size of a dat entry */ + __le16 s_checkpoint_size; /* Size of a checkpoint */ + __le16 s_segment_usage_size; /* Size of a segment usage */ + + __u8 s_uuid[16]; /* 128-bit uuid for volume */ + char s_volume_name[16]; /* volume name */ + char s_last_mounted[64]; /* directory where last mounted */ + + __le32 s_c_interval; /* Commit interval of segment */ + __le32 s_c_block_max; /* Threshold of data amount for + the segment construction */ + __u32 s_reserved[192]; /* padding to the end of the block */ +}; + +/* + * Codes for operating systems + */ +#define NILFS_OS_LINUX 0 +/* Codes from 1 to 4 are reserved to keep compatibility with ext2 creator-OS */ + +/* + * Revision levels + */ +#define NILFS_CURRENT_REV 2 /* current major revision */ +#define NILFS_MINOR_REV 0 /* minor revision */ + +/* + * Bytes count of super_block for CRC-calculation + */ +#define NILFS_SB_BYTES \ + ((long)&((struct nilfs_super_block *)0)->s_reserved) + +/* + * Special inode number + */ +#define NILFS_ROOT_INO 2 /* Root file inode */ +#define NILFS_DAT_INO 3 /* DAT file */ +#define NILFS_CPFILE_INO 4 /* checkpoint file */ +#define NILFS_SUFILE_INO 5 /* segment usage file */ +#define NILFS_IFILE_INO 6 /* ifile */ +#define NILFS_ATIME_INO 7 /* Atime file (reserved) */ +#define NILFS_XATTR_INO 8 /* Xattribute file (reserved) */ +#define NILFS_SKETCH_INO 10 /* Sketch file */ +#define NILFS_USER_INO 11 /* Fisrt user's file inode number */ + +#define NILFS_SB_OFFSET_BYTES 1024 /* byte offset of nilfs superblock */ +#define NILFS_SUPER_MAGIC 0x3434 /* NILFS filesystem magic number */ + +#define NILFS_SEG_MIN_BLOCKS 16 /* Minimum number of blocks in + a full segment */ +#define NILFS_PSEG_MIN_BLOCKS 2 /* Minimum number of blocks in + a partial segment */ +#define NILFS_MIN_NRSVSEGS 8 /* Minimum number of reserved + segments */ + + +/* + * Maximal count of links to a file + */ +#define NILFS_LINK_MAX 32000 + +/* + * Structure of a directory entry + * (Same as ext2) + */ + +#define NILFS_NAME_LEN 255 + +/* + * The new version of the directory entry. Since V0 structures are + * stored in intel byte order, and the name_len field could never be + * bigger than 255 chars, it's safe to reclaim the extra byte for the + * file_type field. + */ +struct nilfs_dir_entry { + __le64 inode; /* Inode number */ + __le16 rec_len; /* Directory entry length */ + __u8 name_len; /* Name length */ + __u8 file_type; + char name[NILFS_NAME_LEN]; /* File name */ + char pad; +}; + +/* + * NILFS directory file types. Only the low 3 bits are used. The + * other bits are reserved for now. + */ +enum { + NILFS_FT_UNKNOWN, + NILFS_FT_REG_FILE, + NILFS_FT_DIR, + NILFS_FT_CHRDEV, + NILFS_FT_BLKDEV, + NILFS_FT_FIFO, + NILFS_FT_SOCK, + NILFS_FT_SYMLINK, + NILFS_FT_MAX +}; + +/* + * NILFS_DIR_PAD defines the directory entries boundaries + * + * NOTE: It must be a multiple of 8 + */ +#define NILFS_DIR_PAD 8 +#define NILFS_DIR_ROUND (NILFS_DIR_PAD - 1) +#define NILFS_DIR_REC_LEN(name_len) (((name_len) + 12 + NILFS_DIR_ROUND) & \ + ~NILFS_DIR_ROUND) + + +/** + * struct nilfs_finfo - file information + * @fi_ino: inode number + * @fi_cno: checkpoint number + * @fi_nblocks: number of blocks (including intermediate blocks) + * @fi_ndatablk: number of file data blocks + */ +struct nilfs_finfo { + __le64 fi_ino; + __le64 fi_cno; + __le32 fi_nblocks; + __le32 fi_ndatablk; + /* array of virtual block numbers */ +}; + +/** + * struct nilfs_binfo_v - information for the block to which a virtual block number is assigned + * @bi_vblocknr: virtual block number + * @bi_blkoff: block offset + */ +struct nilfs_binfo_v { + __le64 bi_vblocknr; + __le64 bi_blkoff; +}; + +/** + * struct nilfs_binfo_dat - information for the block which belongs to the DAT file + * @bi_blkoff: block offset + * @bi_level: level + * @bi_pad: padding + */ +struct nilfs_binfo_dat { + __le64 bi_blkoff; + __u8 bi_level; + __u8 bi_pad[7]; +}; + +/** + * union nilfs_binfo: block information + * @bi_v: nilfs_binfo_v structure + * @bi_dat: nilfs_binfo_dat structure + */ +union nilfs_binfo { + struct nilfs_binfo_v bi_v; + struct nilfs_binfo_dat bi_dat; +}; + +/** + * struct nilfs_segment_summary - segment summary + * @ss_datasum: checksum of data + * @ss_sumsum: checksum of segment summary + * @ss_magic: magic number + * @ss_bytes: size of this structure in bytes + * @ss_flags: flags + * @ss_seq: sequence number + * @ss_create: creation timestamp + * @ss_next: next segment + * @ss_nblocks: number of blocks + * @ss_nfinfo: number of finfo structures + * @ss_sumbytes: total size of segment summary in bytes + * @ss_pad: padding + */ +struct nilfs_segment_summary { + __le32 ss_datasum; + __le32 ss_sumsum; + __le32 ss_magic; + __le16 ss_bytes; + __le16 ss_flags; + __le64 ss_seq; + __le64 ss_create; + __le64 ss_next; + __le32 ss_nblocks; + __le32 ss_nfinfo; + __le32 ss_sumbytes; + __le32 ss_pad; + /* array of finfo structures */ +}; + +#define NILFS_SEGSUM_MAGIC 0x1eaffa11 /* segment summary magic number */ + +/* + * Segment summary flags + */ +#define NILFS_SS_LOGBGN 0x0001 /* begins a logical segment */ +#define NILFS_SS_LOGEND 0x0002 /* ends a logical segment */ +#define NILFS_SS_SR 0x0004 /* has super root */ +#define NILFS_SS_SYNDT 0x0008 /* includes data only updates */ +#define NILFS_SS_GC 0x0010 /* segment written for cleaner operation */ + +/** + * struct nilfs_palloc_group_desc - block group descriptor + * @pg_nfrees: number of free entries in block group + */ +struct nilfs_palloc_group_desc { + __le32 pg_nfrees; +}; + +/** + * struct nilfs_dat_entry - disk address translation entry + * @dt_blocknr: block number + * @dt_start: start checkpoint number + * @dt_end: end checkpoint number + * @dt_rsv: reserved for future use + */ +struct nilfs_dat_entry { + __le64 de_blocknr; + __le64 de_start; + __le64 de_end; + __le64 de_rsv; +}; + +/** + * struct nilfs_dat_group_desc - block group descriptor + * @dg_nfrees: number of free virtual block numbers in block group + */ +struct nilfs_dat_group_desc { + __le32 dg_nfrees; +}; + + +/** + * struct nilfs_snapshot_list - snapshot list + * @ssl_next: next checkpoint number on snapshot list + * @ssl_prev: previous checkpoint number on snapshot list + */ +struct nilfs_snapshot_list { + __le64 ssl_next; + __le64 ssl_prev; +}; + +/** + * struct nilfs_checkpoint - checkpoint structure + * @cp_flags: flags + * @cp_checkpoints_count: checkpoints count in a block + * @cp_snapshot_list: snapshot list + * @cp_cno: checkpoint number + * @cp_create: creation timestamp + * @cp_nblk_inc: number of blocks incremented by this checkpoint + * @cp_inodes_count: inodes count + * @cp_blocks_count: blocks count + * @cp_ifile_inode: inode of ifile + */ +struct nilfs_checkpoint { + __le32 cp_flags; + __le32 cp_checkpoints_count; + struct nilfs_snapshot_list cp_snapshot_list; + __le64 cp_cno; + __le64 cp_create; + __le64 cp_nblk_inc; + __le64 cp_inodes_count; + __le64 cp_blocks_count; /* Reserved (might be deleted) */ + + /* Do not change the byte offset of ifile inode. + To keep the compatibility of the disk format, + additional fields should be added behind cp_ifile_inode. */ + struct nilfs_inode cp_ifile_inode; +}; + +/* checkpoint flags */ +enum { + NILFS_CHECKPOINT_SNAPSHOT, + NILFS_CHECKPOINT_INVALID, + NILFS_CHECKPOINT_SKETCH, +}; + +#define NILFS_CHECKPOINT_FNS(flag, name) \ +static inline void \ +nilfs_checkpoint_set_##name(struct nilfs_checkpoint *cp) \ +{ \ + cp->cp_flags = cpu_to_le32(le32_to_cpu(cp->cp_flags) | \ + (1UL << NILFS_CHECKPOINT_##flag)); \ +} \ +static inline void \ +nilfs_checkpoint_clear_##name(struct nilfs_checkpoint *cp) \ +{ \ + cp->cp_flags = cpu_to_le32(le32_to_cpu(cp->cp_flags) & \ + ~(1UL << NILFS_CHECKPOINT_##flag)); \ +} \ +static inline int \ +nilfs_checkpoint_##name(const struct nilfs_checkpoint *cp) \ +{ \ + return !!(le32_to_cpu(cp->cp_flags) & \ + (1UL << NILFS_CHECKPOINT_##flag)); \ +} + +NILFS_CHECKPOINT_FNS(SNAPSHOT, snapshot) +NILFS_CHECKPOINT_FNS(INVALID, invalid) +NILFS_CHECKPOINT_FNS(SKETCH, sketch) + +/** + * struct nilfs_cpinfo - checkpoint information + * @ci_flags: flags + * @ci_cno: checkpoint number + * @ci_create: creation timestamp + * @ci_nblk_inc: number of blocks incremented by this checkpoint + * @ci_inodes_count: inodes count + * @ci_blocks_count: blocks count + * @ci_next: next checkpoint number in snapshot list + */ +struct nilfs_cpinfo { + __u32 ci_flags; + __u64 ci_cno; + __u64 ci_create; + __u64 ci_nblk_inc; + __u64 ci_inodes_count; + __u64 ci_blocks_count; + __u64 ci_next; +}; + +#define NILFS_CPINFO_FNS(flag, name) \ +static inline int \ +nilfs_cpinfo_##name(const struct nilfs_cpinfo *cpinfo) \ +{ \ + return !!(cpinfo->ci_flags & (1UL << NILFS_CHECKPOINT_##flag)); \ +} + +NILFS_CPINFO_FNS(SNAPSHOT, snapshot) +NILFS_CPINFO_FNS(INVALID, invalid) +NILFS_CPINFO_FNS(SKETCH, sketch) + + +/** + * struct nilfs_cpfile_header - checkpoint file header + * @ch_ncheckpoints: number of checkpoints + * @ch_nsnapshots: number of snapshots + * @ch_snapshot_list: snapshot list + */ +struct nilfs_cpfile_header { + __le64 ch_ncheckpoints; + __le64 ch_nsnapshots; + struct nilfs_snapshot_list ch_snapshot_list; +}; + +#define NILFS_CPFILE_FIRST_CHECKPOINT_OFFSET \ + ((sizeof(struct nilfs_cpfile_header) + \ + sizeof(struct nilfs_checkpoint) - 1) / \ + sizeof(struct nilfs_checkpoint)) + +/** + * struct nilfs_segment_usage - segment usage + * @su_lastmod: last modified timestamp + * @su_nblocks: number of blocks in segment + * @su_flags: flags + */ +struct nilfs_segment_usage { + __le64 su_lastmod; + __le32 su_nblocks; + __le32 su_flags; +}; + +/* segment usage flag */ +enum { + NILFS_SEGMENT_USAGE_ACTIVE, + NILFS_SEGMENT_USAGE_DIRTY, + NILFS_SEGMENT_USAGE_ERROR, + + /* on-memory only */ + NILFS_SEGMENT_USAGE_VOLATILE_ACTIVE, + /* ... */ +}; + +#define NILFS_SEGMENT_USAGE_FNS(flag, name) \ +static inline void \ +nilfs_segment_usage_set_##name(struct nilfs_segment_usage *su) \ +{ \ + su->su_flags = cpu_to_le32(le32_to_cpu(su->su_flags) | \ + (1UL << NILFS_SEGMENT_USAGE_##flag));\ +} \ +static inline void \ +nilfs_segment_usage_clear_##name(struct nilfs_segment_usage *su) \ +{ \ + su->su_flags = \ + cpu_to_le32(le32_to_cpu(su->su_flags) & \ + ~(1UL << NILFS_SEGMENT_USAGE_##flag)); \ +} \ +static inline int \ +nilfs_segment_usage_##name(const struct nilfs_segment_usage *su) \ +{ \ + return !!(le32_to_cpu(su->su_flags) & \ + (1UL << NILFS_SEGMENT_USAGE_##flag)); \ +} + +NILFS_SEGMENT_USAGE_FNS(ACTIVE, active) +NILFS_SEGMENT_USAGE_FNS(DIRTY, dirty) +NILFS_SEGMENT_USAGE_FNS(ERROR, error) +NILFS_SEGMENT_USAGE_FNS(VOLATILE_ACTIVE, volatile_active) + +static inline void +nilfs_segment_usage_set_clean(struct nilfs_segment_usage *su) +{ + su->su_lastmod = cpu_to_le64(0); + su->su_nblocks = cpu_to_le32(0); + su->su_flags = cpu_to_le32(0); +} + +static inline int +nilfs_segment_usage_clean(const struct nilfs_segment_usage *su) +{ + return !le32_to_cpu(su->su_flags); +} + +/** + * struct nilfs_sufile_header - segment usage file header + * @sh_ncleansegs: number of clean segments + * @sh_ndirtysegs: number of dirty segments + * @sh_last_alloc: last allocated segment number + */ +struct nilfs_sufile_header { + __le64 sh_ncleansegs; + __le64 sh_ndirtysegs; + __le64 sh_last_alloc; + /* ... */ +}; + +#define NILFS_SUFILE_FIRST_SEGMENT_USAGE_OFFSET \ + ((sizeof(struct nilfs_sufile_header) + \ + sizeof(struct nilfs_segment_usage) - 1) / \ + sizeof(struct nilfs_segment_usage)) + +/** + * nilfs_suinfo - segment usage information + * @sui_lastmod: + * @sui_nblocks: + * @sui_flags: + */ +struct nilfs_suinfo { + __u64 sui_lastmod; + __u32 sui_nblocks; + __u32 sui_flags; +}; + +#define NILFS_SUINFO_FNS(flag, name) \ +static inline int \ +nilfs_suinfo_##name(const struct nilfs_suinfo *si) \ +{ \ + return si->sui_flags & (1UL << NILFS_SEGMENT_USAGE_##flag); \ +} + +NILFS_SUINFO_FNS(ACTIVE, active) +NILFS_SUINFO_FNS(DIRTY, dirty) +NILFS_SUINFO_FNS(ERROR, error) +NILFS_SUINFO_FNS(VOLATILE_ACTIVE, volatile_active) + +static inline int nilfs_suinfo_clean(const struct nilfs_suinfo *si) +{ + return !si->sui_flags; +} + +/* ioctl */ +enum { + NILFS_CHECKPOINT, + NILFS_SNAPSHOT, +}; + +/** + * struct nilfs_cpmode - + * @cc_cno: + * @cc_mode: + */ +struct nilfs_cpmode { + __u64 cm_cno; + int cm_mode; +}; + +/** + * struct nilfs_argv - argument vector + * @v_base: + * @v_nmembs: + * @v_size: + * @v_index: + * @v_flags: + */ +struct nilfs_argv { + void *v_base; + size_t v_nmembs; /* number of members */ + size_t v_size; /* size of members */ + int v_index; + int v_flags; +}; + +/** + * struct nilfs_period - + * @p_start: + * @p_end: + */ +struct nilfs_period { + __u64 p_start; + __u64 p_end; +}; + +/** + * struct nilfs_cpstat - + * @cs_cno: checkpoint number + * @cs_ncps: number of checkpoints + * @cs_nsss: number of snapshots + */ +struct nilfs_cpstat { + __u64 cs_cno; + __u64 cs_ncps; + __u64 cs_nsss; +}; + +/** + * struct nilfs_sustat - + * @ss_nsegs: number of segments + * @ss_ncleansegs: number of clean segments + * @ss_ndirtysegs: number of dirty segments + * @ss_ctime: + * @ss_nongc_ctime: + */ +struct nilfs_sustat { + __u64 ss_nsegs; + __u64 ss_ncleansegs; + __u64 ss_ndirtysegs; + time_t ss_ctime; + time_t ss_nongc_ctime; +}; + +/** + * struct nilfs_vinfo - virtual block number information + * @vi_vblocknr: + * @vi_start: + * @vi_end: + * @vi_blocknr: + */ +struct nilfs_vinfo { + __u64 vi_vblocknr; + __u64 vi_start; + __u64 vi_end; + __u64 vi_blocknr; +}; + +/** + * struct nilfs_vdesc - + */ +struct nilfs_vdesc { + __u64 vd_ino; + __u64 vd_cno; + __u64 vd_vblocknr; + struct nilfs_period vd_period; + __u64 vd_blocknr; + __u64 vd_offset; + __u32 vd_flags; +}; + +/** + * struct nilfs_bdesc - + */ +struct nilfs_bdesc { + __u64 bd_ino; + __u64 bd_oblocknr; + __u64 bd_blocknr; + __u64 bd_offset; + __u32 bd_level; +}; + +#define NILFS_TIMEDWAIT_WRITE_LOCKED 0x1 +#define NILFS_TIMEDWAIT_SEG_WRITE 0x2 + +/** + * struct nilfs_wait_cond - + */ +struct nilfs_wait_cond { + int wc_cond; + int wc_flags; + struct timespec wc_timeout; +}; + +#define NILFS_IOCTL_IDENT 'n' + +#define NILFS_IOCTL_CHANGE_CPMODE \ + _IOW(NILFS_IOCTL_IDENT, 0x80, struct nilfs_cpmode) +#define NILFS_IOCTL_DELETE_CHECKPOINT \ + _IOW(NILFS_IOCTL_IDENT, 0x81, __u64) +#define NILFS_IOCTL_GET_CPINFO \ + _IOR(NILFS_IOCTL_IDENT, 0x82, struct nilfs_argv) +#define NILFS_IOCTL_GET_CPSTAT \ + _IOR(NILFS_IOCTL_IDENT, 0x83, struct nilfs_cpstat) +#define NILFS_IOCTL_GET_SUINFO \ + _IOR(NILFS_IOCTL_IDENT, 0x84, struct nilfs_argv) +#define NILFS_IOCTL_GET_SUSTAT \ + _IOR(NILFS_IOCTL_IDENT, 0x85, struct nilfs_sustat) +#define NILFS_IOCTL_GET_VINFO \ + _IOWR(NILFS_IOCTL_IDENT, 0x86, struct nilfs_argv) +#define NILFS_IOCTL_GET_BDESCS \ + _IOWR(NILFS_IOCTL_IDENT, 0x87, struct nilfs_argv) +#define NILFS_IOCTL_CLEAN_SEGMENTS \ + _IOW(NILFS_IOCTL_IDENT, 0x88, struct nilfs_argv[5]) +#define NILFS_IOCTL_TIMEDWAIT \ + _IOWR(NILFS_IOCTL_IDENT, 0x89, struct nilfs_wait_cond) +#define NILFS_IOCTL_SYNC \ + _IOR(NILFS_IOCTL_IDENT, 0x8A, __u64) +#define NILFS_IOCTL_RESIZE \ + _IOW(NILFS_IOCTL_IDENT, 0x8B, __u64) + +/* compat_ioctl */ +#ifdef CONFIG_COMPAT +#include + +struct nilfs_cpmode32 { + __u64 cm_cno; + compat_int_t cm_mode; +}; + +struct nilfs_argv32 { + compat_caddr_t v_base; + compat_size_t v_nmembs; + compat_size_t v_size; + compat_int_t v_index; + compat_int_t v_flags; +}; + +struct nilfs_sustat32 { + __u64 ss_nsegs; + __u64 ss_ncleansegs; + __u64 ss_ndirtysegs; + compat_time_t ss_ctime; + compat_time_t ss_nongc_ctime; +}; + +struct nilfs_wait_cond32 { + compat_int_t wc_cond; + compat_int_t wc_flags; + struct compat_timespec wc_timeout; +}; + +#define NILFS_IOCTL32_CHANGE_CPMODE \ + _IOW(NILFS_IOCTL_IDENT, 0x80, struct nilfs_cpmode32) +#define NILFS_IOCTL32_GET_CPINFO \ + _IOR(NILFS_IOCTL_IDENT, 0x82, struct nilfs_argv32) +#define NILFS_IOCTL32_GET_SUINFO \ + _IOR(NILFS_IOCTL_IDENT, 0x84, struct nilfs_argv32) +#define NILFS_IOCTL32_GET_SUSTAT \ + _IOR(NILFS_IOCTL_IDENT, 0x85, struct nilfs_sustat32) +#define NILFS_IOCTL32_GET_VINFO \ + _IOWR(NILFS_IOCTL_IDENT, 0x86, struct nilfs_argv32) +#define NILFS_IOCTL32_GET_BDESCS \ + _IOWR(NILFS_IOCTL_IDENT, 0x87, struct nilfs_argv32) +#define NILFS_IOCTL32_CLEAN_SEGMENTS \ + _IOW(NILFS_IOCTL_IDENT, 0x88, struct nilfs_argv32[5]) +#define NILFS_IOCTL32_TIMEDWAIT \ + _IOWR(NILFS_IOCTL_IDENT, 0x89, struct nilfs_wait_cond32) +#endif /* CONFIG_COMPAT */ + +#endif /* _LINUX_NILFS_FS_H */ -- cgit v1.2.3 From 1088dcf4c3a0a27fdad5214781d5084b11405238 Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Mon, 6 Apr 2009 19:01:51 -0700 Subject: nilfs2: remove timedwait ioctl command This removes NILFS_IOCTL_TIMEDWAIT command from ioctl interface along with the related flags and wait queue. The command is terrible because it just sleeps in the ioctl. I prefer to avoid this by devising means of event polling in userland program. By reconsidering the userland GC daemon, I found this is possible without changing behaviour of the daemon and sacrificing efficiency. Signed-off-by: Ryusuke Konishi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/nilfs2_fs.h | 22 ---------------------- 1 file changed, 22 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nilfs2_fs.h b/include/linux/nilfs2_fs.h index e38fad2f7c0b..b0a6b39eedbc 100644 --- a/include/linux/nilfs2_fs.h +++ b/include/linux/nilfs2_fs.h @@ -763,18 +763,6 @@ struct nilfs_bdesc { __u32 bd_level; }; -#define NILFS_TIMEDWAIT_WRITE_LOCKED 0x1 -#define NILFS_TIMEDWAIT_SEG_WRITE 0x2 - -/** - * struct nilfs_wait_cond - - */ -struct nilfs_wait_cond { - int wc_cond; - int wc_flags; - struct timespec wc_timeout; -}; - #define NILFS_IOCTL_IDENT 'n' #define NILFS_IOCTL_CHANGE_CPMODE \ @@ -795,8 +783,6 @@ struct nilfs_wait_cond { _IOWR(NILFS_IOCTL_IDENT, 0x87, struct nilfs_argv) #define NILFS_IOCTL_CLEAN_SEGMENTS \ _IOW(NILFS_IOCTL_IDENT, 0x88, struct nilfs_argv[5]) -#define NILFS_IOCTL_TIMEDWAIT \ - _IOWR(NILFS_IOCTL_IDENT, 0x89, struct nilfs_wait_cond) #define NILFS_IOCTL_SYNC \ _IOR(NILFS_IOCTL_IDENT, 0x8A, __u64) #define NILFS_IOCTL_RESIZE \ @@ -827,12 +813,6 @@ struct nilfs_sustat32 { compat_time_t ss_nongc_ctime; }; -struct nilfs_wait_cond32 { - compat_int_t wc_cond; - compat_int_t wc_flags; - struct compat_timespec wc_timeout; -}; - #define NILFS_IOCTL32_CHANGE_CPMODE \ _IOW(NILFS_IOCTL_IDENT, 0x80, struct nilfs_cpmode32) #define NILFS_IOCTL32_GET_CPINFO \ @@ -847,8 +827,6 @@ struct nilfs_wait_cond32 { _IOWR(NILFS_IOCTL_IDENT, 0x87, struct nilfs_argv32) #define NILFS_IOCTL32_CLEAN_SEGMENTS \ _IOW(NILFS_IOCTL_IDENT, 0x88, struct nilfs_argv32[5]) -#define NILFS_IOCTL32_TIMEDWAIT \ - _IOWR(NILFS_IOCTL_IDENT, 0x89, struct nilfs_wait_cond32) #endif /* CONFIG_COMPAT */ #endif /* _LINUX_NILFS_FS_H */ -- cgit v1.2.3 From dc498d09be28172846cacded35ca2378222a8c7b Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Mon, 6 Apr 2009 19:01:52 -0700 Subject: nilfs2: use fixed sized types for ioctl structures Nilfs ioctl had structures not having fixed sized types such as: struct nilfs_argv { void *v_base; size_t v_nmembs; size_t v_size; int v_index; int v_flags; }; Further, some of them are wrongly aligned: e.g. struct nilfs_cpmode { __u64 cm_cno; int cm_mode; }; The size of wrongly aligned structures varies depending on architectures, and it breaks the identity of ioctl commands, which leads to arch dependent errors. Previously, these are compensated by using compat_ioctl. This fixes these problems and allows removal of compat ioctl. Since this will change sizes of those structures, binary compatibility for the past utilities will once break; new utilities have to be used instead. However, it would be helpful to avoid platform dependent problems in the long term. Signed-off-by: Ryusuke Konishi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/nilfs2_fs.h | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nilfs2_fs.h b/include/linux/nilfs2_fs.h index b0a6b39eedbc..8fb64ce285fd 100644 --- a/include/linux/nilfs2_fs.h +++ b/include/linux/nilfs2_fs.h @@ -499,6 +499,7 @@ NILFS_CHECKPOINT_FNS(SKETCH, sketch) /** * struct nilfs_cpinfo - checkpoint information * @ci_flags: flags + * @ci_pad: padding * @ci_cno: checkpoint number * @ci_create: creation timestamp * @ci_nblk_inc: number of blocks incremented by this checkpoint @@ -508,6 +509,7 @@ NILFS_CHECKPOINT_FNS(SKETCH, sketch) */ struct nilfs_cpinfo { __u32 ci_flags; + __u32 ci_pad; __u64 ci_cno; __u64 ci_create; __u64 ci_nblk_inc; @@ -668,7 +670,8 @@ enum { */ struct nilfs_cpmode { __u64 cm_cno; - int cm_mode; + __u32 cm_mode; + __u32 cm_pad; }; /** @@ -676,15 +679,15 @@ struct nilfs_cpmode { * @v_base: * @v_nmembs: * @v_size: - * @v_index: * @v_flags: + * @v_index: */ struct nilfs_argv { - void *v_base; - size_t v_nmembs; /* number of members */ - size_t v_size; /* size of members */ - int v_index; - int v_flags; + __u64 v_base; + __u32 v_nmembs; /* number of members */ + __u16 v_size; /* size of members */ + __u16 v_flags; + __u64 v_index; }; /** @@ -721,8 +724,8 @@ struct nilfs_sustat { __u64 ss_nsegs; __u64 ss_ncleansegs; __u64 ss_ndirtysegs; - time_t ss_ctime; - time_t ss_nongc_ctime; + __u64 ss_ctime; + __u64 ss_nongc_ctime; }; /** @@ -750,6 +753,7 @@ struct nilfs_vdesc { __u64 vd_blocknr; __u64 vd_offset; __u32 vd_flags; + __u32 vd_pad; }; /** @@ -761,6 +765,7 @@ struct nilfs_bdesc { __u64 bd_blocknr; __u64 bd_offset; __u32 bd_level; + __u32 bd_pad; }; #define NILFS_IOCTL_IDENT 'n' -- cgit v1.2.3 From 8082d36aed26c4fb6ed43e4008303682eabf839e Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Mon, 6 Apr 2009 19:01:53 -0700 Subject: nilfs2: remove compat ioctl code This removes compat code from the nilfs ioctls and applies the same function for both .ioctl and .compat_ioctl file operations. Signed-off-by: Ryusuke Konishi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/nilfs2_fs.h | 41 ----------------------------------------- 1 file changed, 41 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nilfs2_fs.h b/include/linux/nilfs2_fs.h index 8fb64ce285fd..306c446e694e 100644 --- a/include/linux/nilfs2_fs.h +++ b/include/linux/nilfs2_fs.h @@ -793,45 +793,4 @@ struct nilfs_bdesc { #define NILFS_IOCTL_RESIZE \ _IOW(NILFS_IOCTL_IDENT, 0x8B, __u64) -/* compat_ioctl */ -#ifdef CONFIG_COMPAT -#include - -struct nilfs_cpmode32 { - __u64 cm_cno; - compat_int_t cm_mode; -}; - -struct nilfs_argv32 { - compat_caddr_t v_base; - compat_size_t v_nmembs; - compat_size_t v_size; - compat_int_t v_index; - compat_int_t v_flags; -}; - -struct nilfs_sustat32 { - __u64 ss_nsegs; - __u64 ss_ncleansegs; - __u64 ss_ndirtysegs; - compat_time_t ss_ctime; - compat_time_t ss_nongc_ctime; -}; - -#define NILFS_IOCTL32_CHANGE_CPMODE \ - _IOW(NILFS_IOCTL_IDENT, 0x80, struct nilfs_cpmode32) -#define NILFS_IOCTL32_GET_CPINFO \ - _IOR(NILFS_IOCTL_IDENT, 0x82, struct nilfs_argv32) -#define NILFS_IOCTL32_GET_SUINFO \ - _IOR(NILFS_IOCTL_IDENT, 0x84, struct nilfs_argv32) -#define NILFS_IOCTL32_GET_SUSTAT \ - _IOR(NILFS_IOCTL_IDENT, 0x85, struct nilfs_sustat32) -#define NILFS_IOCTL32_GET_VINFO \ - _IOWR(NILFS_IOCTL_IDENT, 0x86, struct nilfs_argv32) -#define NILFS_IOCTL32_GET_BDESCS \ - _IOWR(NILFS_IOCTL_IDENT, 0x87, struct nilfs_argv32) -#define NILFS_IOCTL32_CLEAN_SEGMENTS \ - _IOW(NILFS_IOCTL_IDENT, 0x88, struct nilfs_argv32[5]) -#endif /* CONFIG_COMPAT */ - #endif /* _LINUX_NILFS_FS_H */ -- cgit v1.2.3 From 2c2e52fc4fca251e68f90821c9ff5cb18be4df58 Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Mon, 6 Apr 2009 19:01:54 -0700 Subject: nilfs2: extend nilfs_sustat ioctl struct This adds a new argument to the nilfs_sustat structure. The extended field allows to delete volatile active state of segments, which was needed to protect freshly-created segments from garbage collection but has confused code dealing with segments. This extension alleviates the mess and gives room for further simplifications. The volatile active flag is not persistent, so it's eliminable on this occasion without affecting compatibility other than the ioctl change. Signed-off-by: Ryusuke Konishi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/nilfs2_fs.h | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nilfs2_fs.h b/include/linux/nilfs2_fs.h index 306c446e694e..aa93f0ee29d4 100644 --- a/include/linux/nilfs2_fs.h +++ b/include/linux/nilfs2_fs.h @@ -565,8 +565,6 @@ enum { NILFS_SEGMENT_USAGE_DIRTY, NILFS_SEGMENT_USAGE_ERROR, - /* on-memory only */ - NILFS_SEGMENT_USAGE_VOLATILE_ACTIVE, /* ... */ }; @@ -594,7 +592,6 @@ nilfs_segment_usage_##name(const struct nilfs_segment_usage *su) \ NILFS_SEGMENT_USAGE_FNS(ACTIVE, active) NILFS_SEGMENT_USAGE_FNS(DIRTY, dirty) NILFS_SEGMENT_USAGE_FNS(ERROR, error) -NILFS_SEGMENT_USAGE_FNS(VOLATILE_ACTIVE, volatile_active) static inline void nilfs_segment_usage_set_clean(struct nilfs_segment_usage *su) @@ -650,7 +647,6 @@ nilfs_suinfo_##name(const struct nilfs_suinfo *si) \ NILFS_SUINFO_FNS(ACTIVE, active) NILFS_SUINFO_FNS(DIRTY, dirty) NILFS_SUINFO_FNS(ERROR, error) -NILFS_SUINFO_FNS(VOLATILE_ACTIVE, volatile_active) static inline int nilfs_suinfo_clean(const struct nilfs_suinfo *si) { @@ -717,8 +713,9 @@ struct nilfs_cpstat { * @ss_nsegs: number of segments * @ss_ncleansegs: number of clean segments * @ss_ndirtysegs: number of dirty segments - * @ss_ctime: - * @ss_nongc_ctime: + * @ss_ctime: creation time of the last segment + * @ss_nongc_ctime: creation time of the last segment not for GC + * @ss_prot_seq: least sequence number of segments which must not be reclaimed */ struct nilfs_sustat { __u64 ss_nsegs; @@ -726,6 +723,7 @@ struct nilfs_sustat { __u64 ss_ndirtysegs; __u64 ss_ctime; __u64 ss_nongc_ctime; + __u64 ss_prot_seq; }; /** -- cgit v1.2.3 From 458c5b0822a669d170fdb7bb16c9145f652ebe06 Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Mon, 6 Apr 2009 19:01:56 -0700 Subject: nilfs2: clean up sketch file The sketch file is a file to mark checkpoints with user data. It was experimentally introduced in the original implementation, and now obsolete. The file was handled differently with regular files; the file size got truncated when a checkpoint was created. This stops the special treatment and will treat it as a regular file. Most users are not affected because mkfs.nilfs2 no longer makes this file. Signed-off-by: Ryusuke Konishi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/nilfs2_fs.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nilfs2_fs.h b/include/linux/nilfs2_fs.h index aa93f0ee29d4..e9c84aa4a8e1 100644 --- a/include/linux/nilfs2_fs.h +++ b/include/linux/nilfs2_fs.h @@ -494,7 +494,6 @@ nilfs_checkpoint_##name(const struct nilfs_checkpoint *cp) \ NILFS_CHECKPOINT_FNS(SNAPSHOT, snapshot) NILFS_CHECKPOINT_FNS(INVALID, invalid) -NILFS_CHECKPOINT_FNS(SKETCH, sketch) /** * struct nilfs_cpinfo - checkpoint information @@ -527,7 +526,6 @@ nilfs_cpinfo_##name(const struct nilfs_cpinfo *cpinfo) \ NILFS_CPINFO_FNS(SNAPSHOT, snapshot) NILFS_CPINFO_FNS(INVALID, invalid) -NILFS_CPINFO_FNS(SKETCH, sketch) /** -- cgit v1.2.3 From c96fa464a567a2a8796009af0e79bc68af73f485 Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Mon, 6 Apr 2009 19:01:57 -0700 Subject: nilfs2: mark minor flag for checkpoint created by internal operation Nilfs creates checkpoints even for garbage collection or metadata updates such as checkpoint mode change. So, user often sees checkpoints created only by such internal operations. This is inconvenient in some situations. For example, application that monitors checkpoints and changes them to snapshots, will fall into an infinite loop because it cannot distinguish internally created checkpoints. This patch solves this sort of problem by adding a flag to checkpoint for identification. Signed-off-by: Ryusuke Konishi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/nilfs2_fs.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nilfs2_fs.h b/include/linux/nilfs2_fs.h index e9c84aa4a8e1..cbce6647f7fd 100644 --- a/include/linux/nilfs2_fs.h +++ b/include/linux/nilfs2_fs.h @@ -470,6 +470,7 @@ enum { NILFS_CHECKPOINT_SNAPSHOT, NILFS_CHECKPOINT_INVALID, NILFS_CHECKPOINT_SKETCH, + NILFS_CHECKPOINT_MINOR, }; #define NILFS_CHECKPOINT_FNS(flag, name) \ @@ -494,6 +495,7 @@ nilfs_checkpoint_##name(const struct nilfs_checkpoint *cp) \ NILFS_CHECKPOINT_FNS(SNAPSHOT, snapshot) NILFS_CHECKPOINT_FNS(INVALID, invalid) +NILFS_CHECKPOINT_FNS(MINOR, minor) /** * struct nilfs_cpinfo - checkpoint information @@ -526,6 +528,7 @@ nilfs_cpinfo_##name(const struct nilfs_cpinfo *cpinfo) \ NILFS_CPINFO_FNS(SNAPSHOT, snapshot) NILFS_CPINFO_FNS(INVALID, invalid) +NILFS_CPINFO_FNS(MINOR, minor) /** -- cgit v1.2.3 From e339ad31f59925b48a92ee3947692fdf9758b8c7 Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Mon, 6 Apr 2009 19:01:59 -0700 Subject: nilfs2: introduce secondary super block The former versions didn't have extra super blocks. This improves the weak point by introducing another super block at unused region in tail of the partition. This doesn't break disk format compatibility; older versions just ingore the secondary super block, and new versions just recover it if it doesn't exist. The partition created by an old mkfs may not have unused region, but in that case, the secondary super block will not be added. This doesn't make more redundant copies of the super block; it is a future work. Signed-off-by: Ryusuke Konishi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/nilfs2_fs.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nilfs2_fs.h b/include/linux/nilfs2_fs.h index cbce6647f7fd..1275b3099535 100644 --- a/include/linux/nilfs2_fs.h +++ b/include/linux/nilfs2_fs.h @@ -252,6 +252,10 @@ struct nilfs_super_block { #define NILFS_MIN_NRSVSEGS 8 /* Minimum number of reserved segments */ +/* + * bytes offset of secondary super block + */ +#define NILFS_SB2_OFFSET_BYTES(devsize) ((((devsize) >> 12) - 1) << 12) /* * Maximal count of links to a file -- cgit v1.2.3 From 612392307cb09e49051225092cbbd7049bd8db93 Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Mon, 6 Apr 2009 19:02:00 -0700 Subject: nilfs2: support nanosecond timestamp After a review of user's feedback for finding out other compatibility issues, I found nilfs improperly initializes timestamps in inode; CURRENT_TIME was used there instead of CURRENT_TIME_SEC even though nilfs didn't have nanosecond timestamps on disk. A few users gave us the report that the tar program sometimes failed to expand symbolic links on nilfs, and it turned out to be the cause. Instead of applying the above displacement, I've decided to support nanosecond timestamps on this occation. Fortunetaly, a needless 64-bit field was in the nilfs_inode struct, and I found it's available for this purpose without impact for the users. So, this will do the enhancement and resolve the tar problem. Signed-off-by: Ryusuke Konishi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/nilfs2_fs.h | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nilfs2_fs.h b/include/linux/nilfs2_fs.h index 1275b3099535..79fec6af3f9f 100644 --- a/include/linux/nilfs2_fs.h +++ b/include/linux/nilfs2_fs.h @@ -67,9 +67,10 @@ * struct nilfs_inode - structure of an inode on disk * @i_blocks: blocks count * @i_size: size in bytes - * @i_ctime: creation time - * @i_mtime: modification time - * @i_dtime: deletion time + * @i_ctime: creation time (seconds) + * @i_mtime: modification time (seconds) + * @i_ctime_nsec: creation time (nano seconds) + * @i_mtime_nsec: modification time (nano seconds) * @i_uid: user id * @i_gid: group id * @i_mode: file mode @@ -85,7 +86,8 @@ struct nilfs_inode { __le64 i_size; __le64 i_ctime; __le64 i_mtime; - __le64 i_dtime; + __le32 i_ctime_nsec; + __le32 i_mtime_nsec; __le32 i_uid; __le32 i_gid; __le16 i_mode; -- cgit v1.2.3 From f786ddd285b4100909a013041d3eee1be9fac4db Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 7 Apr 2009 16:48:07 +0100 Subject: tty: Correct inline types for tty_driver_kref_get() tty_driver_kref_get() should be static inline and not extern inline (the latter even changed it's semantics in gcc >= 4.3). Signed-off-by: Adrian Bunk Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- include/linux/tty_driver.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h index 8615d661ab60..bcba84ea2d86 100644 --- a/include/linux/tty_driver.h +++ b/include/linux/tty_driver.h @@ -309,7 +309,8 @@ extern void tty_set_operations(struct tty_driver *driver, extern struct tty_driver *tty_find_polling_driver(char *name, int *line); extern void tty_driver_kref_put(struct tty_driver *driver); -extern inline struct tty_driver *tty_driver_kref_get(struct tty_driver *d) + +static inline struct tty_driver *tty_driver_kref_get(struct tty_driver *d) { kref_get(&d->kref); return d; -- cgit v1.2.3 From 1dcb884ca8048efb4ce2999d367c26369ab2227c Mon Sep 17 00:00:00 2001 From: Christian Pellegrin Date: Tue, 7 Apr 2009 16:48:51 +0100 Subject: Add support for the MAX3100 SPI UART. (akpm: queued pending confirmation of the new major number) [randy.dunlap@oracle.com: select SERIAL_CORE] Signed-off-by: Christian Pellegrin Signed-off-by: Andrew Morton Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- include/linux/serial_core.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 83e4b3ff9cda..57a97e52e58d 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -164,6 +164,9 @@ /* NWPSERIAL */ #define PORT_NWPSERIAL 85 +/* MAX3100 */ +#define PORT_MAX3100 86 + #ifdef __KERNEL__ #include -- cgit v1.2.3 From 51dcdfec6a274afc1c6fce180d582add9ff512c0 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 7 Apr 2009 15:30:57 +0100 Subject: parport: Use the PCI IRQ if offered PCI parallel port devices can IRQ share so we should stop them hogging the line and making a mess on modern PC systems. We know the sharing side works as the PCMCIA driver has shared the parallel port IRQ for some time. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- include/linux/parport_pc.h | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/parport_pc.h b/include/linux/parport_pc.h index ea8c6d84996d..cc1767f5cca8 100644 --- a/include/linux/parport_pc.h +++ b/include/linux/parport_pc.h @@ -228,10 +228,11 @@ extern void parport_pc_release_resources(struct parport *p); extern int parport_pc_claim_resources(struct parport *p); /* PCMCIA code will want to get us to look at a port. Provide a mechanism. */ -extern struct parport *parport_pc_probe_port (unsigned long base, - unsigned long base_hi, - int irq, int dma, - struct device *dev); -extern void parport_pc_unregister_port (struct parport *p); +extern struct parport *parport_pc_probe_port(unsigned long base, + unsigned long base_hi, + int irq, int dma, + struct device *dev, + int irqflags); +extern void parport_pc_unregister_port(struct parport *p); #endif -- cgit v1.2.3 From aeeae86859f4319de0a4946b44771d9926eeed54 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 7 Apr 2009 07:59:41 -0700 Subject: Fix build errors due to CONFIG_BRANCH_TRACER=y The code that enables branch tracing for all (non-constant) branches plays games with the preprocessor and #define's the C 'if ()' construct to do tracing. That's all fine, but it fails for some unusual but valid C code that is sometimes used in macros, notably by the intel-iommu code: if (i=drhd->iommu, drhd->ignored) .. because now the preprocessor complains about multiple arguments to the 'if' macro. So make the macro expansion of this particularly horrid trick use varargs, and handle the case of comma-expressions in if-statements. Use another macro to do it cleanly in just one place. This replaces a patch by David (and acked by Steven) that did this all inside that one already-too-horrid macro. Tested-by: Ingo Molnar Cc: David Woodhouse Cc: Steven Rostedt Signed-off-by: Linus Torvalds --- include/linux/compiler.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/compiler.h b/include/linux/compiler.h index 6faa7e549de4..cebfdcd3dbdd 100644 --- a/include/linux/compiler.h +++ b/include/linux/compiler.h @@ -114,7 +114,9 @@ void ftrace_likely_update(struct ftrace_branch_data *f, int val, int expect); * "Define 'is'", Bill Clinton * "Define 'if'", Steven Rostedt */ -#define if(cond) if (__builtin_constant_p((cond)) ? !!(cond) : \ +#define if(cond, ...) __trace_if( (cond , ## __VA_ARGS__) ) +#define __trace_if(cond) \ + if (__builtin_constant_p((cond)) ? !!(cond) : \ ({ \ int ______r; \ static struct ftrace_branch_data \ -- cgit v1.2.3 From 8d82ffd15e59febf2c597067a777526958b7f769 Mon Sep 17 00:00:00 2001 From: Wolfgang Grandegger Date: Tue, 7 Apr 2009 10:20:56 +0200 Subject: powerpc: Document new FSL I2C bindings and cleanup This patch documents the new bindings for the MPC I2C bus driver. Furthermore, it removes obsolete FSL device related definitions for I2C. Signed-off-by: Wolfgang Grandegger Signed-off-by: Kumar Gala --- include/linux/fsl_devices.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h index f2a78b5e8b55..43fc95d822d5 100644 --- a/include/linux/fsl_devices.h +++ b/include/linux/fsl_devices.h @@ -43,10 +43,6 @@ * */ -/* Flags related to I2C device features */ -#define FSL_I2C_DEV_SEPARATE_DFSRR 0x00000001 -#define FSL_I2C_DEV_CLOCK_5200 0x00000002 - enum fsl_usb2_operating_modes { FSL_USB2_MPH_HOST, FSL_USB2_DR_HOST, -- cgit v1.2.3 From f876d346e3807647b1de411de6a86c44821896ca Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Wed, 8 Apr 2009 14:05:43 +0900 Subject: tracing: append a comma to INIT_FTRACE_GRAPH Impact: dont break future extensions of INIT_TASK While not a problem right now, due to lack of a comma, build fails if elements are appended to INIT_TASK() macro in development code: arch/x86/kernel/init_task.c:33: error: request for member `XXXXXXXXXX' in something not a structure or union arch/x86/kernel/init_task.c:33: error: initializer element is not constant arch/x86/kernel/init_task.c:33: error: (near initialization for `init_task.ret_stack') make[1]: *** [arch/x86/kernel/init_task.o] Error 1 make: *** [arch/x86/kernel] Error 2 Signed-off-by: Tetsuo Handa Cc: srostedt@redhat.com LKML-Reference: <200904080505.n3855hcn017109@www262.sakura.ne.jp> Signed-off-by: Ingo Molnar --- include/linux/ftrace.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index da5405dce347..ff112a872d75 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -357,7 +357,7 @@ struct ftrace_graph_ret { #ifdef CONFIG_FUNCTION_GRAPH_TRACER /* for init task */ -#define INIT_FTRACE_GRAPH .ret_stack = NULL +#define INIT_FTRACE_GRAPH .ret_stack = NULL, /* * Stack of return addresses for functions -- cgit v1.2.3 From 60f85019c6c8c1aebf3485a313e0da094bc95d07 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 8 Apr 2009 14:13:01 +0200 Subject: ide: replace IDE_TFLAG_* flags by IDE_VALID_* Replace IDE_TFLAG_{IN|OUT}_* flags meaning to the taskfile register validity on input/output by the IDE_VALID_* flags and introduce 4 symmetric 8-bit register validity indicator subfields, 'valid.{input/output}.{tf|hob}', into the 'struct ide_cmd' instead of using the 'tf_flags' field for that purpose (this field can then be turned from 32-bit into 8-bit one). Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/ide.h | 95 +++++++++++++++++++++-------------------------------- 1 file changed, 38 insertions(+), 57 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ide.h b/include/linux/ide.h index a5d26f66ef78..58951f5540bf 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -239,66 +239,39 @@ typedef enum { ide_started, /* a drive operation was started, handler was set */ } ide_startstop_t; +enum { + IDE_VALID_ERROR = (1 << 1), + IDE_VALID_FEATURE = IDE_VALID_ERROR, + IDE_VALID_NSECT = (1 << 2), + IDE_VALID_LBAL = (1 << 3), + IDE_VALID_LBAM = (1 << 4), + IDE_VALID_LBAH = (1 << 5), + IDE_VALID_DEVICE = (1 << 6), + IDE_VALID_LBA = IDE_VALID_LBAL | + IDE_VALID_LBAM | + IDE_VALID_LBAH, + IDE_VALID_OUT_TF = IDE_VALID_FEATURE | + IDE_VALID_NSECT | + IDE_VALID_LBA, + IDE_VALID_IN_TF = IDE_VALID_NSECT | + IDE_VALID_LBA, + IDE_VALID_OUT_HOB = IDE_VALID_OUT_TF, + IDE_VALID_IN_HOB = IDE_VALID_ERROR | + IDE_VALID_NSECT | + IDE_VALID_LBA, +}; + enum { IDE_TFLAG_LBA48 = (1 << 0), - IDE_TFLAG_OUT_HOB_FEATURE = (1 << 1), - IDE_TFLAG_OUT_HOB_NSECT = (1 << 2), - IDE_TFLAG_OUT_HOB_LBAL = (1 << 3), - IDE_TFLAG_OUT_HOB_LBAM = (1 << 4), - IDE_TFLAG_OUT_HOB_LBAH = (1 << 5), - IDE_TFLAG_OUT_HOB = IDE_TFLAG_OUT_HOB_FEATURE | - IDE_TFLAG_OUT_HOB_NSECT | - IDE_TFLAG_OUT_HOB_LBAL | - IDE_TFLAG_OUT_HOB_LBAM | - IDE_TFLAG_OUT_HOB_LBAH, - IDE_TFLAG_OUT_FEATURE = (1 << 6), - IDE_TFLAG_OUT_NSECT = (1 << 7), - IDE_TFLAG_OUT_LBAL = (1 << 8), - IDE_TFLAG_OUT_LBAM = (1 << 9), - IDE_TFLAG_OUT_LBAH = (1 << 10), - IDE_TFLAG_OUT_TF = IDE_TFLAG_OUT_FEATURE | - IDE_TFLAG_OUT_NSECT | - IDE_TFLAG_OUT_LBAL | - IDE_TFLAG_OUT_LBAM | - IDE_TFLAG_OUT_LBAH, - IDE_TFLAG_OUT_DEVICE = (1 << 11), - IDE_TFLAG_WRITE = (1 << 12), - IDE_TFLAG_CUSTOM_HANDLER = (1 << 13), - IDE_TFLAG_DMA_PIO_FALLBACK = (1 << 14), - IDE_TFLAG_IN_HOB_ERROR = (1 << 15), - IDE_TFLAG_IN_HOB_NSECT = (1 << 16), - IDE_TFLAG_IN_HOB_LBAL = (1 << 17), - IDE_TFLAG_IN_HOB_LBAM = (1 << 18), - IDE_TFLAG_IN_HOB_LBAH = (1 << 19), - IDE_TFLAG_IN_HOB_LBA = IDE_TFLAG_IN_HOB_LBAL | - IDE_TFLAG_IN_HOB_LBAM | - IDE_TFLAG_IN_HOB_LBAH, - IDE_TFLAG_IN_HOB = IDE_TFLAG_IN_HOB_ERROR | - IDE_TFLAG_IN_HOB_NSECT | - IDE_TFLAG_IN_HOB_LBA, - IDE_TFLAG_IN_ERROR = (1 << 20), - IDE_TFLAG_IN_NSECT = (1 << 21), - IDE_TFLAG_IN_LBAL = (1 << 22), - IDE_TFLAG_IN_LBAM = (1 << 23), - IDE_TFLAG_IN_LBAH = (1 << 24), - IDE_TFLAG_IN_LBA = IDE_TFLAG_IN_LBAL | - IDE_TFLAG_IN_LBAM | - IDE_TFLAG_IN_LBAH, - IDE_TFLAG_IN_TF = IDE_TFLAG_IN_NSECT | - IDE_TFLAG_IN_LBA, - IDE_TFLAG_IN_DEVICE = (1 << 25), - IDE_TFLAG_HOB = IDE_TFLAG_OUT_HOB | - IDE_TFLAG_IN_HOB, - IDE_TFLAG_TF = IDE_TFLAG_OUT_TF | - IDE_TFLAG_IN_TF, - IDE_TFLAG_DEVICE = IDE_TFLAG_OUT_DEVICE | - IDE_TFLAG_IN_DEVICE, + IDE_TFLAG_WRITE = (1 << 1), + IDE_TFLAG_CUSTOM_HANDLER = (1 << 2), + IDE_TFLAG_DMA_PIO_FALLBACK = (1 << 3), /* force 16-bit I/O operations */ - IDE_TFLAG_IO_16BIT = (1 << 26), + IDE_TFLAG_IO_16BIT = (1 << 4), /* struct ide_cmd was allocated using kmalloc() */ - IDE_TFLAG_DYN = (1 << 27), - IDE_TFLAG_FS = (1 << 28), - IDE_TFLAG_MULTI_PIO = (1 << 29), + IDE_TFLAG_DYN = (1 << 5), + IDE_TFLAG_FS = (1 << 6), + IDE_TFLAG_MULTI_PIO = (1 << 7), }; enum { @@ -346,8 +319,16 @@ struct ide_cmd { struct ide_taskfile tf; u8 tf_array[14]; }; + + struct { + struct { + u8 tf; + u8 hob; + } out, in; + } valid; + + u8 tf_flags; u8 ftf_flags; /* for TASKFILE ioctl */ - u32 tf_flags; int protocol; int sg_nents; /* number of sg entries */ -- cgit v1.2.3 From 745483f10c6cefb303007c6873e2bfce54efa8ed Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 8 Apr 2009 14:13:02 +0200 Subject: ide: simplify 'struct ide_taskfile' Make 'struct ide_taskfile' cover only 8 register values and thus put two such fields ('tf' and 'hob') into 'struct ide_cmd', dropping unnecessary 'tf_array' field from it. This required changing the prototype of ide_get_lba_addr() and ide_tf_dump(). Signed-off-by: Sergei Shtylyov [bart: fix setting of ATA_LBA bit for LBA48 commands in __ide_do_rw_disk()] Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/ide.h | 49 +++++++++++++++---------------------------------- 1 file changed, 15 insertions(+), 34 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ide.h b/include/linux/ide.h index 58951f5540bf..e2ea38df26bc 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -282,44 +282,25 @@ enum { }; struct ide_taskfile { - u8 hob_data; /* 0: high data byte (for TASKFILE IOCTL) */ - /* 1-5: additional data to support LBA48 */ - union { - u8 hob_error; /* read: error */ - u8 hob_feature; /* write: feature */ - }; - - u8 hob_nsect; - u8 hob_lbal; - u8 hob_lbam; - u8 hob_lbah; - - u8 data; /* 6: low data byte (for TASKFILE IOCTL) */ - - union { /*  7: */ - u8 error; /* read: error */ - u8 feature; /* write: feature */ + u8 data; /* 0: data byte (for TASKFILE ioctl) */ + union { /* 1: */ + u8 error; /* read: error */ + u8 feature; /* write: feature */ }; - - u8 nsect; /* 8: number of sectors */ - u8 lbal; /* 9: LBA low */ - u8 lbam; /* 10: LBA mid */ - u8 lbah; /* 11: LBA high */ - - u8 device; /* 12: device select */ - - union { /* 13: */ - u8 status; /*  read: status  */ + u8 nsect; /* 2: number of sectors */ + u8 lbal; /* 3: LBA low */ + u8 lbam; /* 4: LBA mid */ + u8 lbah; /* 5: LBA high */ + u8 device; /* 6: device select */ + union { /* 7: */ + u8 status; /* read: status */ u8 command; /* write: command */ }; }; struct ide_cmd { - union { - struct ide_taskfile tf; - u8 tf_array[14]; - }; - + struct ide_taskfile tf; + struct ide_taskfile hob; struct { struct { u8 tf; @@ -1143,7 +1124,7 @@ extern int ide_devset_execute(ide_drive_t *drive, void ide_complete_cmd(ide_drive_t *, struct ide_cmd *, u8, u8); int ide_complete_rq(ide_drive_t *, int, unsigned int); -void ide_tf_dump(const char *, struct ide_taskfile *); +void ide_tf_dump(const char *, struct ide_cmd *); void ide_exec_command(ide_hwif_t *, u8); u8 ide_read_status(ide_hwif_t *); @@ -1510,7 +1491,7 @@ static inline void ide_set_hwifdata (ide_hwif_t * hwif, void *data) extern void ide_toggle_bounce(ide_drive_t *drive, int on); -u64 ide_get_lba_addr(struct ide_taskfile *, int); +u64 ide_get_lba_addr(struct ide_cmd *, int); u8 ide_dump_status(ide_drive_t *, const char *, u8); struct ide_timing { -- cgit v1.2.3 From c9ff9e7b64138d87023b733e618f29a1d58543f7 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 8 Apr 2009 14:13:03 +0200 Subject: ide: refactor tf_load() method Simplify tf_load() method, making it deal only with 'struct ide_taskfile' and the validity flags that the upper layer passes, and moving the code that deals with the high order bytes into the only function interested, do_rw_taskfile(). This should stop the needless code duplication in this method and so make it about twice smaller than it was; along with simplifying the setup for the method call, this should save both time and space... Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/ide.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ide.h b/include/linux/ide.h index e2ea38df26bc..0ba1c6ab97f8 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -624,7 +624,7 @@ struct ide_tp_ops { void (*write_devctl)(struct hwif_s *, u8); void (*dev_select)(ide_drive_t *); - void (*tf_load)(ide_drive_t *, struct ide_cmd *); + void (*tf_load)(ide_drive_t *, struct ide_taskfile *, u8); void (*tf_read)(ide_drive_t *, struct ide_cmd *); void (*input_data)(ide_drive_t *, struct ide_cmd *, @@ -1132,7 +1132,7 @@ u8 ide_read_altstatus(ide_hwif_t *); void ide_write_devctl(ide_hwif_t *, u8); void ide_dev_select(ide_drive_t *); -void ide_tf_load(ide_drive_t *, struct ide_cmd *); +void ide_tf_load(ide_drive_t *, struct ide_taskfile *, u8); void ide_tf_read(ide_drive_t *, struct ide_cmd *); void ide_input_data(ide_drive_t *, struct ide_cmd *, void *, unsigned int); -- cgit v1.2.3 From 3153c26b54230d025c6d536e8d3015def4524906 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 8 Apr 2009 14:13:03 +0200 Subject: ide: refactor tf_read() method Simplify tf_read() method, making it deal only with 'struct ide_taskfile' and the validity flags that the upper layer passes, and factoring out the code that deals with the high order bytes into ide_tf_readback() to be called from the only two functions interested, ide_complete_cmd() and ide_dump_sector(). This should stop the needless code duplication in this method and so make it about twice smaller than it was; along with simplifying the setup for the method call, this should save both time and space... Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/ide.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ide.h b/include/linux/ide.h index 0ba1c6ab97f8..ff65fffb078f 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -625,7 +625,7 @@ struct ide_tp_ops { void (*dev_select)(ide_drive_t *); void (*tf_load)(ide_drive_t *, struct ide_taskfile *, u8); - void (*tf_read)(ide_drive_t *, struct ide_cmd *); + void (*tf_read)(ide_drive_t *, struct ide_taskfile *, u8); void (*input_data)(ide_drive_t *, struct ide_cmd *, void *, unsigned int); @@ -1124,6 +1124,7 @@ extern int ide_devset_execute(ide_drive_t *drive, void ide_complete_cmd(ide_drive_t *, struct ide_cmd *, u8, u8); int ide_complete_rq(ide_drive_t *, int, unsigned int); +void ide_tf_readback(ide_drive_t *drive, struct ide_cmd *cmd); void ide_tf_dump(const char *, struct ide_cmd *); void ide_exec_command(ide_hwif_t *, u8); @@ -1133,7 +1134,7 @@ void ide_write_devctl(ide_hwif_t *, u8); void ide_dev_select(ide_drive_t *); void ide_tf_load(ide_drive_t *, struct ide_taskfile *, u8); -void ide_tf_read(ide_drive_t *, struct ide_cmd *); +void ide_tf_read(ide_drive_t *, struct ide_taskfile *, u8); void ide_input_data(ide_drive_t *, struct ide_cmd *, void *, unsigned int); void ide_output_data(ide_drive_t *, struct ide_cmd *, void *, unsigned int); -- cgit v1.2.3 From 7831d56b0a3544cbb6f82f76c34ca95e24d5b676 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 8 Apr 2009 20:13:16 +0100 Subject: tty: MAX3100 Thou shalt remember to use 'git add' or errors shall be visited on your downloads and there shall be wrath from on list and much gnashing of teeth. Thou shalt remember to use git status or there shall be catcalls and much embarrasment shall come to pass. Signed-off-by: Alan "I'm hiding" Cox Signed-off-by: Linus Torvalds --- include/linux/serial_max3100.h | 52 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) create mode 100644 include/linux/serial_max3100.h (limited to 'include/linux') diff --git a/include/linux/serial_max3100.h b/include/linux/serial_max3100.h new file mode 100644 index 000000000000..4976befb6aeb --- /dev/null +++ b/include/linux/serial_max3100.h @@ -0,0 +1,52 @@ +/* + * + * Copyright (C) 2007 Christian Pellegrin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + + +#ifndef _LINUX_SERIAL_MAX3100_H +#define _LINUX_SERIAL_MAX3100_H 1 + + +/** + * struct plat_max3100 - MAX3100 SPI UART platform data + * @loopback: force MAX3100 in loopback + * @crystal: 1 for 3.6864 Mhz, 0 for 1.8432 + * @max3100_hw_suspend: MAX3100 has a shutdown pin. This is a hook + * called on suspend and resume to activate it. + * @poll_time: poll time for CTS signal in ms, 0 disables (so no hw + * flow ctrl is possible but you have less CPU usage) + * + * You should use this structure in your machine description to specify + * how the MAX3100 is connected. Example: + * + * static struct plat_max3100 max3100_plat_data = { + * .loopback = 0, + * .crystal = 0, + * .poll_time = 100, + * }; + * + * static struct spi_board_info spi_board_info[] = { + * { + * .modalias = "max3100", + * .platform_data = &max3100_plat_data, + * .irq = IRQ_EINT12, + * .max_speed_hz = 5*1000*1000, + * .chip_select = 0, + * }, + * }; + * + **/ +struct plat_max3100 { + int loopback; + int crystal; + void (*max3100_hw_suspend) (int suspend); + int poll_time; +}; + +#endif -- cgit v1.2.3 From 692d0eb9e02cf81fb387ff891f53840db2f3110a Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Thu, 9 Apr 2009 00:27:13 +0100 Subject: dm: remove limited barrier support Prepare for full barrier implementation: first remove the restricted support. Signed-off-by: Mikulas Patocka Signed-off-by: Alasdair G Kergon --- include/linux/device-mapper.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h index 66ec05a57955..ded2d7c42668 100644 --- a/include/linux/device-mapper.h +++ b/include/linux/device-mapper.h @@ -116,7 +116,6 @@ void dm_put_device(struct dm_target *ti, struct dm_dev *d); /* * Target features */ -#define DM_TARGET_SUPPORTS_BARRIERS 0x00000001 struct target_type { uint64_t features; -- cgit v1.2.3 From 47788c58e66c050982241d9a05eb690daceb05a9 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Wed, 8 Apr 2009 20:40:59 +0200 Subject: tracing/syscalls: use a dedicated file header Impact: fix build warnings and possibe compat misbehavior on IA64 Building a kernel on ia64 might trigger these ugly build warnings: CC arch/ia64/ia32/sys_ia32.o In file included from arch/ia64/ia32/sys_ia32.c:55: arch/ia64/ia32/ia32priv.h:290:1: warning: "elf_check_arch" redefined In file included from include/linux/elf.h:7, from include/linux/module.h:14, from include/linux/ftrace.h:8, from include/linux/syscalls.h:68, from arch/ia64/ia32/sys_ia32.c:18: arch/ia64/include/asm/elf.h:19:1: warning: this is the location of the previous definition [...] sys_ia32.c includes linux/syscalls.h which in turn includes linux/ftrace.h to import the syscalls tracing prototypes. But including ftrace.h can pull too much things for a low level file, especially on ia64 where the ia32 private headers conflict with higher level headers. Now we isolate the syscall tracing headers in their own lightweight file. Reported-by: Tony Luck Tested-by: Tony Luck Signed-off-by: Frederic Weisbecker Acked-by: Tony Luck Signed-off-by: Steven Rostedt Cc: Peter Zijlstra Cc: Jason Baron Cc: "Frank Ch. Eigler" Cc: Mathieu Desnoyers Cc: KOSAKI Motohiro Cc: Lai Jiangshan Cc: Jiaying Zhang Cc: Michael Rubin Cc: Martin Bligh Cc: Michael Davidson LKML-Reference: <20090408184058.GB6017@nowhere> Signed-off-by: Ingo Molnar --- include/linux/ftrace.h | 29 ----------------------------- include/linux/syscalls.h | 2 +- 2 files changed, 1 insertion(+), 30 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index ff112a872d75..8a0c2f221e6b 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -511,33 +511,4 @@ static inline void trace_hw_branch_oops(void) {} #endif /* CONFIG_HW_BRANCH_TRACER */ -/* - * A syscall entry in the ftrace syscalls array. - * - * @name: name of the syscall - * @nb_args: number of parameters it takes - * @types: list of types as strings - * @args: list of args as strings (args[i] matches types[i]) - */ -struct syscall_metadata { - const char *name; - int nb_args; - const char **types; - const char **args; -}; - -#ifdef CONFIG_FTRACE_SYSCALLS -extern void arch_init_ftrace_syscalls(void); -extern struct syscall_metadata *syscall_nr_to_meta(int nr); -extern void start_ftrace_syscalls(void); -extern void stop_ftrace_syscalls(void); -extern void ftrace_syscall_enter(struct pt_regs *regs); -extern void ftrace_syscall_exit(struct pt_regs *regs); -#else -static inline void start_ftrace_syscalls(void) { } -static inline void stop_ftrace_syscalls(void) { } -static inline void ftrace_syscall_enter(struct pt_regs *regs) { } -static inline void ftrace_syscall_exit(struct pt_regs *regs) { } -#endif - #endif /* _LINUX_FTRACE_H */ diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index 6470f74074af..dabe4ad89141 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -65,7 +65,7 @@ struct old_linux_dirent; #include #include #include -#include +#include #define __SC_DECL1(t1, a1) t1 a1 #define __SC_DECL2(t2, a2, ...) t2 a2, __SC_DECL1(__VA_ARGS__) -- cgit v1.2.3 From e3c8ca8336707062f3f7cb1cd7e6b3c753baccdd Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Wed, 8 Apr 2009 19:45:12 -0500 Subject: sched: do not count frozen tasks toward load Freezing tasks via the cgroup freezer causes the load average to climb because the freezer's current implementation puts frozen tasks in uninterruptible sleep (D state). Some applications which perform job-scheduling functions consult the load average when making decisions. If a cgroup is frozen, the load average does not provide a useful measure of the system's utilization to such applications. This is especially inconvenient if the job scheduler employs the cgroup freezer as a mechanism for preempting low priority jobs. Contrast this with using SIGSTOP for the same purpose: the stopped tasks do not count toward system load. Change task_contributes_to_load() to return false if the task is frozen. This results in /proc/loadavg behavior that better meets users' expectations. Signed-off-by: Nathan Lynch Acked-by: Andrew Morton Acked-by: Nigel Cunningham Tested-by: Nigel Cunningham Cc: Cc: containers@lists.linux-foundation.org Cc: linux-pm@lists.linux-foundation.org Cc: Matt Helsley LKML-Reference: <20090408194512.47a99b95@manatee.lan> Signed-off-by: Ingo Molnar --- include/linux/sched.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 98e1fe51601d..b4c38bc8049c 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -205,7 +205,8 @@ extern unsigned long long time_sync_thresh; #define task_is_stopped_or_traced(task) \ ((task->state & (__TASK_STOPPED | __TASK_TRACED)) != 0) #define task_contributes_to_load(task) \ - ((task->state & TASK_UNINTERRUPTIBLE) != 0) + ((task->state & TASK_UNINTERRUPTIBLE) != 0 && \ + (task->flags & PF_FROZEN) == 0) #define __set_task_state(tsk, state_value) \ do { (tsk)->state = (state_value); } while (0) -- cgit v1.2.3 From 97c18e2c7a8e36d2d83d50ee070314aadac73a11 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Thu, 9 Apr 2009 10:35:47 +0800 Subject: module: try_then_request_module must wait Since the whole point of try_then_request_module is to retry the operation after a module has been loaded, we must wait for the module to fully load. Otherwise all sort of things start breaking, e.g., you won't be able to read your encrypted disks on the first attempt. Signed-off-by: Herbert Xu Tested-by: Maciej Rutecki Tested-by: Patrick McHardy Signed-off-by: Linus Torvalds --- include/linux/kmod.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/kmod.h b/include/linux/kmod.h index d5fa565086d1..384ca8bbf1ac 100644 --- a/include/linux/kmod.h +++ b/include/linux/kmod.h @@ -34,7 +34,7 @@ extern int __request_module(bool wait, const char *name, ...) \ #define request_module(mod...) __request_module(true, mod) #define request_module_nowait(mod...) __request_module(false, mod) #define try_then_request_module(x, mod...) \ - ((x) ?: (__request_module(false, mod), (x))) + ((x) ?: (__request_module(true, mod), (x))) #else static inline int request_module(const char *name, ...) { return -ENOSYS; } static inline int request_module_nowait(const char *name, ...) { return -ENOSYS; } -- cgit v1.2.3 From 8f7c2c37319a81ef4c2bfdec67b1ccd5744d97e4 Mon Sep 17 00:00:00 2001 From: Zhaolei Date: Wed, 8 Apr 2009 16:58:57 +0800 Subject: Make __stringify support variable argument macros too For example: __stringify(__entry->irq, __entry->ret) will now convert it to: "REC->irq, REC->ret" It also still supports single arguments as the old macro did. Signed-off-by: Zhao Lei Acked-by: Frederic Weisbecker Cc: Steven Rostedt LKML-Reference: <49DC6751.30308@cn.fujitsu.com> Signed-off-by: Ingo Molnar --- include/linux/stringify.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/stringify.h b/include/linux/stringify.h index 0b4388356c87..841cec8ed525 100644 --- a/include/linux/stringify.h +++ b/include/linux/stringify.h @@ -6,7 +6,7 @@ * converts to "bar". */ -#define __stringify_1(x) #x -#define __stringify(x) __stringify_1(x) +#define __stringify_1(x...) #x +#define __stringify(x...) __stringify_1(x) #endif /* !__LINUX_STRINGIFY_H */ -- cgit v1.2.3 From 066123a535927b3f17cac2305258cc71abdb0d92 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 10 Apr 2009 12:02:40 -0700 Subject: percpu: unbreak alpha percpu For the time being, move the generic percpu_*() accessors to linux/percpu.h. asm-generic/percpu.h is meant to carry generic stuff for low level stuff - declarations, definitions and pointer offset calculation and so on but not for generic interface. Signed-off-by: Ingo Molnar --- include/linux/percpu.h | 52 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) (limited to 'include/linux') diff --git a/include/linux/percpu.h b/include/linux/percpu.h index ee5615d65211..cfda2d5ad319 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -168,4 +168,56 @@ static inline void free_percpu(void *p) #define alloc_percpu(type) (type *)__alloc_percpu(sizeof(type), \ __alignof__(type)) +/* + * Optional methods for optimized non-lvalue per-cpu variable access. + * + * @var can be a percpu variable or a field of it and its size should + * equal char, int or long. percpu_read() evaluates to a lvalue and + * all others to void. + * + * These operations are guaranteed to be atomic w.r.t. preemption. + * The generic versions use plain get/put_cpu_var(). Archs are + * encouraged to implement single-instruction alternatives which don't + * require preemption protection. + */ +#ifndef percpu_read +# define percpu_read(var) \ + ({ \ + typeof(per_cpu_var(var)) __tmp_var__; \ + __tmp_var__ = get_cpu_var(var); \ + put_cpu_var(var); \ + __tmp_var__; \ + }) +#endif + +#define __percpu_generic_to_op(var, val, op) \ +do { \ + get_cpu_var(var) op val; \ + put_cpu_var(var); \ +} while (0) + +#ifndef percpu_write +# define percpu_write(var, val) __percpu_generic_to_op(var, (val), =) +#endif + +#ifndef percpu_add +# define percpu_add(var, val) __percpu_generic_to_op(var, (val), +=) +#endif + +#ifndef percpu_sub +# define percpu_sub(var, val) __percpu_generic_to_op(var, (val), -=) +#endif + +#ifndef percpu_and +# define percpu_and(var, val) __percpu_generic_to_op(var, (val), &=) +#endif + +#ifndef percpu_or +# define percpu_or(var, val) __percpu_generic_to_op(var, (val), |=) +#endif + +#ifndef percpu_xor +# define percpu_xor(var, val) __percpu_generic_to_op(var, (val), ^=) +#endif + #endif /* __LINUX_PERCPU_H */ -- cgit v1.2.3 From fd746d540abf8c686f5f868ae62112692e684088 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Sat, 11 Apr 2009 16:54:59 -0700 Subject: Input: ads7846 - introduce platform specific way to synchronize sampling Noises can be introduced when LCD signals are being driven, some platforms provide a signal to assist the synchronization of this sampling procedure. Signed-off-by: Eric Miao Signed-off-by: Andrew Morton Signed-off-by: Dmitry Torokhov --- include/linux/spi/ads7846.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h index 05eab2f11e63..2ea20320c093 100644 --- a/include/linux/spi/ads7846.h +++ b/include/linux/spi/ads7846.h @@ -51,5 +51,6 @@ struct ads7846_platform_data { void **filter_data); int (*filter) (void *filter_data, int data_idx, int *val); void (*filter_cleanup)(void *filter_data); + void (*wait_for_sync)(void); }; -- cgit v1.2.3 From 9eeba6138cefc0435695463ddadb0d95e0a6bcd2 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Sat, 11 Apr 2009 03:17:17 +0200 Subject: lockdep: warn about lockdep disabling after kernel taint Impact: provide useful missing info for developers Kernel taint can occur in several situations such as warnings, load of prorietary or staging modules, bad page, etc... But when such taint happens, a developer might still be working on the kernel, expecting that lockdep is still enabled. But a taint disables lockdep without ever warning about it. Such a kernel behaviour doesn't really help for kernel development. This patch adds this missing warning. Since the taint is done most of the time after the main message that explain the real source issue, it seems safe to warn about it inside add_taint() so that it appears at last, without hurting the main information. v2: Use a generic helper to disable lockdep instead of an open coded xchg(). Signed-off-by: Frederic Weisbecker Cc: Peter Zijlstra LKML-Reference: <1239412638-6739-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar --- include/linux/debug_locks.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/debug_locks.h b/include/linux/debug_locks.h index 096476f1fb35..493dedb7a67b 100644 --- a/include/linux/debug_locks.h +++ b/include/linux/debug_locks.h @@ -2,12 +2,19 @@ #define __LINUX_DEBUG_LOCKING_H #include +#include struct task_struct; extern int debug_locks; extern int debug_locks_silent; + +static inline int __debug_locks_off(void) +{ + return xchg(&debug_locks, 0); +} + /* * Generic 'turn off all lock debugging' function: */ -- cgit v1.2.3 From c758e8cffe3b1bc7970d579371db01b19ff440bf Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 13 Apr 2009 17:02:14 +0200 Subject: i2c: Fix sparse warnings for I2C_BOARD_INFO() Since the first argument to I2C_BOARD_INFO() must be a string constant, there is no need to parenthesise it, and adding parentheses results in an invalid initialiser for char[]. gcc obviously accepts this syntax as an extension, but sparse complains, e.g.: drivers/net/sfc/boards.c:173:2: warning: array initialized from parenthesized string constant Therefore, remove the parentheses. Signed-off-by: Ben Hutchings Signed-off-by: Jean Delvare --- include/linux/i2c.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 00ee11eb9092..ad2580596033 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -274,7 +274,7 @@ struct i2c_board_info { * are provided using conventional syntax. */ #define I2C_BOARD_INFO(dev_type, dev_addr) \ - .type = (dev_type), .addr = (dev_addr) + .type = dev_type, .addr = (dev_addr) /* Add-on boards should register/unregister their devices; e.g. a board -- cgit v1.2.3 From 0ad30b8fd5fe798aae80df6344b415d8309342cc Mon Sep 17 00:00:00 2001 From: "Serge E. Hallyn" Date: Mon, 13 Apr 2009 09:56:14 -0500 Subject: add some long-missing capabilities to fs_mask When POSIX capabilities were introduced during the 2.1 Linux cycle, the fs mask, which represents the capabilities which having fsuid==0 is supposed to grant, did not include CAP_MKNOD and CAP_LINUX_IMMUTABLE. However, before capabilities the privilege to call these did in fact depend upon fsuid==0. This patch introduces those capabilities into the fsmask, restoring the old behavior. See the thread starting at http://lkml.org/lkml/2009/3/11/157 for reference. Note that if this fix is deemed valid, then earlier kernel versions (2.4 and 2.2) ought to be fixed too. Changelog: [Mar 23] Actually delete old CAP_FS_SET definition... [Mar 20] Updated against J. Bruce Fields's patch Reported-by: Igor Zhbanov Signed-off-by: Serge E. Hallyn Cc: stable@kernel.org Cc: J. Bruce Fields Signed-off-by: Linus Torvalds --- include/linux/capability.h | 23 +++++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/capability.h b/include/linux/capability.h index 4864a43b2b45..c3021105edc0 100644 --- a/include/linux/capability.h +++ b/include/linux/capability.h @@ -377,7 +377,21 @@ struct cpu_vfs_cap_data { #define CAP_FOR_EACH_U32(__capi) \ for (__capi = 0; __capi < _KERNEL_CAPABILITY_U32S; ++__capi) +/* + * CAP_FS_MASK and CAP_NFSD_MASKS: + * + * The fs mask is all the privileges that fsuid==0 historically meant. + * At one time in the past, that included CAP_MKNOD and CAP_LINUX_IMMUTABLE. + * + * It has never meant setting security.* and trusted.* xattrs. + * + * We could also define fsmask as follows: + * 1. CAP_FS_MASK is the privilege to bypass all fs-related DAC permissions + * 2. The security.* and trusted.* xattrs are fs-related MAC permissions + */ + # define CAP_FS_MASK_B0 (CAP_TO_MASK(CAP_CHOWN) \ + | CAP_TO_MASK(CAP_MKNOD) \ | CAP_TO_MASK(CAP_DAC_OVERRIDE) \ | CAP_TO_MASK(CAP_DAC_READ_SEARCH) \ | CAP_TO_MASK(CAP_FOWNER) \ @@ -392,11 +406,12 @@ struct cpu_vfs_cap_data { # define CAP_EMPTY_SET ((kernel_cap_t){{ 0, 0 }}) # define CAP_FULL_SET ((kernel_cap_t){{ ~0, ~0 }}) # define CAP_INIT_EFF_SET ((kernel_cap_t){{ ~CAP_TO_MASK(CAP_SETPCAP), ~0 }}) -# define CAP_FS_SET ((kernel_cap_t){{ CAP_FS_MASK_B0, CAP_FS_MASK_B1 } }) +# define CAP_FS_SET ((kernel_cap_t){{ CAP_FS_MASK_B0 \ + | CAP_TO_MASK(CAP_LINUX_IMMUTABLE), \ + CAP_FS_MASK_B1 } }) # define CAP_NFSD_SET ((kernel_cap_t){{ CAP_FS_MASK_B0 \ - | CAP_TO_MASK(CAP_SYS_RESOURCE) \ - | CAP_TO_MASK(CAP_MKNOD), \ - CAP_FS_MASK_B1 } }) + | CAP_TO_MASK(CAP_SYS_RESOURCE), \ + CAP_FS_MASK_B1 } }) #endif /* _KERNEL_CAPABILITY_U32S != 2 */ -- cgit v1.2.3 From a8729eb302a5b5da8b0b4d29582c42648a2e0f12 Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Tue, 7 Apr 2009 02:01:42 +0000 Subject: phylib: Allow early-out in phy_change Marvell 88E1121R Dual PHY device can be hardware-configured to use shared interrupt pin for both PHY ports. For such PHY configurations using shared PHY interrupt phy_interrupt() handler will also schedule a work for PHY port which didn't cause an interrupt. This patch adds a possibility for PHY drivers to provide did_interrupt() function which reports if the PHY (or a PHY port in a multi-PHY device) generated an interrupt. This function is called in phy_change() as phy_change() shouldn't proceed if it is invoked for a PHY which didn't cause an interrupt. So check for interrupt originator in phy_change() to allow early-out. Signed-off-by: Anatolij Gustschin Signed-off-by: David S. Miller --- include/linux/phy.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/phy.h b/include/linux/phy.h index 32cf14a4b034..97e40cb6b588 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -388,6 +388,12 @@ struct phy_driver { /* Enables or disables interrupts */ int (*config_intr)(struct phy_device *phydev); + /* + * Checks if the PHY generated an interrupt. + * For multi-PHY devices with shared PHY interrupt pin + */ + int (*did_interrupt)(struct phy_device *phydev); + /* Clears up any memory if needed */ void (*remove)(struct phy_device *phydev); -- cgit v1.2.3 From ebde441177da3bad156701d351509f34295282ab Mon Sep 17 00:00:00 2001 From: Michal Januszewski Date: Mon, 13 Apr 2009 14:39:41 -0700 Subject: fbdev: fix color component field length documentation The documentation about the meaning of the color component bitfield lengths in pseudocolor modes is inconsistent. Fix it, so that it indicates the correct interpretation everywhere, i.e. that 1 << length is the number of palette entries. Signed-off-by: Michal Januszewski Acked-by: Krzysztof Helt Cc: Acked-by: Geert Uytterhoeven Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/fb.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fb.h b/include/linux/fb.h index f563c5013932..330c4b1bfcaa 100644 --- a/include/linux/fb.h +++ b/include/linux/fb.h @@ -173,8 +173,12 @@ struct fb_fix_screeninfo { /* Interpretation of offset for color fields: All offsets are from the right, * inside a "pixel" value, which is exactly 'bits_per_pixel' wide (means: you * can use the offset as right argument to <<). A pixel afterwards is a bit - * stream and is written to video memory as that unmodified. This implies - * big-endian byte order if bits_per_pixel is greater than 8. + * stream and is written to video memory as that unmodified. + * + * For pseudocolor: offset and length should be the same for all color + * components. Offset specifies the position of the least significant bit + * of the pallette index in a pixel value. Length indicates the number + * of available palette entries (i.e. # of entries = 1 << length). */ struct fb_bitfield { __u32 offset; /* beginning of bitfield */ -- cgit v1.2.3 From 251eb40f5ccd07a905633a816fbf8f2b6b25cced Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Mon, 13 Apr 2009 14:39:45 -0700 Subject: hwmon: sht15 humidity sensor driver Data sheet at: http://www.sensirion.ch/en/pdf/product_information/Datasheet-humidity-sensor-SHT1x.pdf These sensors communicate over a 2 wire bus running a device specific protocol. The complexity of the driver is mainly due to handling the substantial delays between requesting a reading and the device pulling the data line low to indicate that the data is available. This is handled by an interrupt that is disabled under all other conditions. I wasn't terribly clear on the best way to handle this, so comments on that aspect would be particularly welcome! Interpretation of the temperature depends on knowing the supply voltage. If configured in a board config as a regulator consumer this is obtained from the regulator subsystem. If not it should be provided in the platform data. I've placed this driver in the hwmon subsystem as it is definitely a device that may be used for hardware monitoring and with it's relatively slow response times (up to 120 millisecs to get a reading) a caching strategy certainly seems to make sense! Signed-off-by: Jonathan Cameron Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/sht15.h | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 include/linux/sht15.h (limited to 'include/linux') diff --git a/include/linux/sht15.h b/include/linux/sht15.h new file mode 100644 index 000000000000..046bce05ecab --- /dev/null +++ b/include/linux/sht15.h @@ -0,0 +1,24 @@ +/* + * sht15.h - support for the SHT15 Temperature and Humidity Sensor + * + * Copyright (c) 2009 Jonathan Cameron + * + * Copyright (c) 2007 Wouter Horre + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/** + * struct sht15_platform_data - sht15 connectivity info + * @gpio_data: no. of gpio to which bidirectional data line is connected + * @gpio_sck: no. of gpio to which the data clock is connected. + * @supply_mv: supply voltage in mv. Overridden by regulator if available. + **/ +struct sht15_platform_data { + int gpio_data; + int gpio_sck; + int supply_mv; +}; + -- cgit v1.2.3 From 17a5138d204014b00cb9c1d6e8ff311993041b5c Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Mon, 13 Apr 2009 14:39:47 -0700 Subject: aio: remove INIT_KIOCTX Unused after 20dcae32439384b6863c626bb3b2a09bed65b33e aka "[PATCH] aio: remove kioctx from mm_struct". Signed-off-by: Alexey Dobriyan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/init_task.h | 13 ------------- 1 file changed, 13 deletions(-) (limited to 'include/linux') diff --git a/include/linux/init_task.h b/include/linux/init_task.h index dcfb93337e9a..d87247d2641f 100644 --- a/include/linux/init_task.h +++ b/include/linux/init_task.h @@ -15,19 +15,6 @@ extern struct files_struct init_files; extern struct fs_struct init_fs; -#define INIT_KIOCTX(name, which_mm) \ -{ \ - .users = ATOMIC_INIT(1), \ - .dead = 0, \ - .mm = &which_mm, \ - .user_id = 0, \ - .next = NULL, \ - .wait = __WAIT_QUEUE_HEAD_INITIALIZER(name.wait), \ - .ctx_lock = __SPIN_LOCK_UNLOCKED(name.ctx_lock), \ - .reqs_active = 0U, \ - .max_reqs = ~0U, \ -} - #define INIT_MM(name) \ { \ .mm_rb = RB_ROOT, \ -- cgit v1.2.3 From 5dec8bfbdd4921522565a7b0e0c8760ae042ef6d Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Mon, 13 Apr 2009 14:39:54 -0700 Subject: include/linux/fiemap.h: include types.h now that it's exported Include in fiemap.h. Sam Ravnborg pointed out that this was missing in this newly-exported header which uses the __u32 and __u64 types. Signed-off-by: Eric Sandeen Cc: Sam Ravnborg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/fiemap.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/fiemap.h b/include/linux/fiemap.h index 671decbd2aeb..934e22d65801 100644 --- a/include/linux/fiemap.h +++ b/include/linux/fiemap.h @@ -11,6 +11,8 @@ #ifndef _LINUX_FIEMAP_H #define _LINUX_FIEMAP_H +#include + struct fiemap_extent { __u64 fe_logical; /* logical offset in bytes for the start of * the extent from the beginning of the file */ -- cgit v1.2.3 From 347486bb108fa6e0fd2753c1be3519d6be2516ed Mon Sep 17 00:00:00 2001 From: Stefan Husemann Date: Mon, 13 Apr 2009 14:40:10 -0700 Subject: intelfb: support i854 Support the Intel 854 Chipset in fbdev. We test and use the patch on a Thomson IP1101 IPTV-Box. On the VGA-Port we get a normal signal. Here is the link to the Mambux-Project: http://www.mambux.de Cc: Keith Packard Cc: Dave Airlie Cc: Krzysztof Helt Signed-off-by: Stefan Husemann Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/pci_ids.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index ee98cd570885..06ba90c211a5 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2514,6 +2514,8 @@ #define PCI_DEVICE_ID_INTEL_IOAT_TBG3 0x3433 #define PCI_DEVICE_ID_INTEL_82830_HB 0x3575 #define PCI_DEVICE_ID_INTEL_82830_CGC 0x3577 +#define PCI_DEVICE_ID_INTEL_82854_HB 0x358c +#define PCI_DEVICE_ID_INTEL_82854_IG 0x358e #define PCI_DEVICE_ID_INTEL_82855GM_HB 0x3580 #define PCI_DEVICE_ID_INTEL_82855GM_IG 0x3582 #define PCI_DEVICE_ID_INTEL_E7520_MCH 0x3590 -- cgit v1.2.3 From 27b19565fe4ca5b0e9d2ae98ce4b81ca728bf445 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 14 Apr 2009 11:03:12 +0200 Subject: lockdep: warn about lockdep disabling after kernel taint, fix Impact: build fix for Sparc and s390 Stephen Rothwell reported that the Sparc build broke: In file included from kernel/panic.c:12: include/linux/debug_locks.h: In function '__debug_locks_off': include/linux/debug_locks.h:15: error: implicit declaration of function 'xchg' due to: 9eeba61: lockdep: warn about lockdep disabling after kernel taint There is some inconsistency between architectures about where exactly xchg() is defined. The traditional place is in system.h but the more logical point for it is in atomic.h - where most architectures (especially new ones) have it defined. These architecture also still offer it via system.h. Some, such as Sparc or s390 only have it in asm/system.h and not available via asm/atomic.h at all. Use the widest set of headers in debug_locks.h and also include asm/system.h. Reported-by: Stephen Rothwell Cc: Frederic Weisbecker Cc: "David S. Miller" Cc: Linus Torvalds LKML-Reference: <20090414144317.026498df.sfr@canb.auug.org.au> Signed-off-by: Ingo Molnar --- include/linux/debug_locks.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/debug_locks.h b/include/linux/debug_locks.h index 493dedb7a67b..29b3ce3f2a1d 100644 --- a/include/linux/debug_locks.h +++ b/include/linux/debug_locks.h @@ -3,6 +3,7 @@ #include #include +#include struct task_struct; -- cgit v1.2.3 From ef631b0ca01655d24e9ca7e199262c4a46416a26 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Mon, 13 Apr 2009 21:31:16 -0700 Subject: rcu: Make hierarchical RCU less IPI-happy This patch fixes a hierarchical-RCU performance bug located by Anton Blanchard. The problem stems from a misguided attempt to provide a work-around for jiffies-counter failure. This work-around uses a per-CPU n_rcu_pending counter, which is incremented on each call to rcu_pending(), which in turn is called from each scheduling-clock interrupt. Each CPU then treats this counter as a surrogate for the jiffies counter, so that if the jiffies counter fails to advance, the per-CPU n_rcu_pending counter will cause RCU to invoke force_quiescent_state(), which in turn will (among other things) send resched IPIs to CPUs that have thus far failed to pass through an RCU quiescent state. Unfortunately, each CPU resets only its own counter after sending a batch of IPIs. This means that the other CPUs will also (needlessly) send -another- round of IPIs, for a full N-squared set of IPIs in the worst case every three scheduler-clock ticks until the grace period finally ends. It is not reasonable for a given CPU to reset each and every n_rcu_pending for all the other CPUs, so this patch instead simply disables the jiffies-counter "training wheels", thus eliminating the excessive IPIs. Note that the jiffies-counter IPIs do not have this problem due to the fact that the jiffies counter is global, so that the CPU sending the IPIs can easily reset things, thus preventing the other CPUs from sending redundant IPIs. Note also that the n_rcu_pending counter remains, as it will continue to be used for tracing. It may also see use to update the jiffies counter, should an appropriate kick-the-jiffies-counter API appear. Located-by: Anton Blanchard Tested-by: Anton Blanchard Signed-off-by: Paul E. McKenney Cc: anton@samba.org Cc: akpm@linux-foundation.org Cc: dipankar@in.ibm.com Cc: manfred@colorfullife.com Cc: cl@linux-foundation.org Cc: josht@linux.vnet.ibm.com Cc: schamp@sgi.com Cc: niv@us.ibm.com Cc: dvhltc@us.ibm.com Cc: ego@in.ibm.com Cc: laijs@cn.fujitsu.com Cc: rostedt@goodmis.org Cc: peterz@infradead.org Cc: penberg@cs.helsinki.fi Cc: andi@firstfloor.org Cc: "Paul E. McKenney" LKML-Reference: <12396834793575-git-send-email-> Signed-off-by: Ingo Molnar --- include/linux/rcutree.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h index 0cdda00f2b2a..58b2aa5312b9 100644 --- a/include/linux/rcutree.h +++ b/include/linux/rcutree.h @@ -161,9 +161,8 @@ struct rcu_data { unsigned long offline_fqs; /* Kicked due to being offline. */ unsigned long resched_ipi; /* Sent a resched IPI. */ - /* 5) state to allow this CPU to force_quiescent_state on others */ + /* 5) For future __rcu_pending statistics. */ long n_rcu_pending; /* rcu_pending() calls since boot. */ - long n_rcu_pending_force_qs; /* when to force quiescent states. */ int cpu; }; -- cgit v1.2.3 From 78c5b82ee68207a176ad5ca5eabdb2dbe5cfbfd3 Mon Sep 17 00:00:00 2001 From: Leandro Dorileo Date: Tue, 14 Apr 2009 14:59:51 +0100 Subject: tty: Update some of the USB kernel doc Updates some usb_serial_port members documentation. Signed-off-by: Leandro Dorileo Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- include/linux/usb/serial.h | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index b95842542590..625e9e4639c6 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -29,7 +29,7 @@ /** * usb_serial_port: structure for the specific ports of a device. * @serial: pointer back to the struct usb_serial owner of this port. - * @tty: pointer to the corresponding tty for this port. + * @port: pointer to the corresponding tty_port for this port. * @lock: spinlock to grab when updating portions of this structure. * @mutex: mutex used to synchronize serial_open() and serial_close() * access for this port. @@ -44,19 +44,22 @@ * @interrupt_out_endpointAddress: endpoint address for the interrupt out pipe * for this port. * @bulk_in_buffer: pointer to the bulk in buffer for this port. + * @bulk_in_size: the size of the bulk_in_buffer, in bytes. * @read_urb: pointer to the bulk in struct urb for this port. * @bulk_in_endpointAddress: endpoint address for the bulk in pipe for this * port. * @bulk_out_buffer: pointer to the bulk out buffer for this port. * @bulk_out_size: the size of the bulk_out_buffer, in bytes. * @write_urb: pointer to the bulk out struct urb for this port. + * @write_urb_busy: port`s writing status * @bulk_out_endpointAddress: endpoint address for the bulk out pipe for this * port. * @write_wait: a wait_queue_head_t used by the port. * @work: work queue entry for the line discipline waking up. - * @open_count: number of times this port has been opened. * @throttled: nonzero if the read urb is inactive to throttle the device * @throttle_req: nonzero if the tty wants to throttle us + * @console: attached usb serial console + * @dev: pointer to the serial device * * This structure is used by the usb-serial core and drivers for the specific * ports of a device. -- cgit v1.2.3 From 8f3d8ba20e67991b531e9c0227dcd1f99271a32c Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 7 Apr 2009 19:55:13 +0200 Subject: block: move bio list helpers into bio.h It's used by DM and MD and generally useful, so move the bio list helpers into bio.h. Signed-off-by: Christoph Hellwig Acked-by: Alasdair G Kergon Signed-off-by: Jens Axboe --- include/linux/bio.h | 109 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 109 insertions(+) (limited to 'include/linux') diff --git a/include/linux/bio.h b/include/linux/bio.h index b900d2c67d29..b89cf2d82898 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -504,6 +504,115 @@ static inline int bio_has_data(struct bio *bio) return bio && bio->bi_io_vec != NULL; } +/* + * BIO list managment for use by remapping drivers (e.g. DM or MD). + * + * A bio_list anchors a singly-linked list of bios chained through the bi_next + * member of the bio. The bio_list also caches the last list member to allow + * fast access to the tail. + */ +struct bio_list { + struct bio *head; + struct bio *tail; +}; + +static inline int bio_list_empty(const struct bio_list *bl) +{ + return bl->head == NULL; +} + +static inline void bio_list_init(struct bio_list *bl) +{ + bl->head = bl->tail = NULL; +} + +#define bio_list_for_each(bio, bl) \ + for (bio = (bl)->head; bio; bio = bio->bi_next) + +static inline unsigned bio_list_size(const struct bio_list *bl) +{ + unsigned sz = 0; + struct bio *bio; + + bio_list_for_each(bio, bl) + sz++; + + return sz; +} + +static inline void bio_list_add(struct bio_list *bl, struct bio *bio) +{ + bio->bi_next = NULL; + + if (bl->tail) + bl->tail->bi_next = bio; + else + bl->head = bio; + + bl->tail = bio; +} + +static inline void bio_list_add_head(struct bio_list *bl, struct bio *bio) +{ + bio->bi_next = bl->head; + + bl->head = bio; + + if (!bl->tail) + bl->tail = bio; +} + +static inline void bio_list_merge(struct bio_list *bl, struct bio_list *bl2) +{ + if (!bl2->head) + return; + + if (bl->tail) + bl->tail->bi_next = bl2->head; + else + bl->head = bl2->head; + + bl->tail = bl2->tail; +} + +static inline void bio_list_merge_head(struct bio_list *bl, + struct bio_list *bl2) +{ + if (!bl2->head) + return; + + if (bl->head) + bl2->tail->bi_next = bl->head; + else + bl->tail = bl2->tail; + + bl->head = bl2->head; +} + +static inline struct bio *bio_list_pop(struct bio_list *bl) +{ + struct bio *bio = bl->head; + + if (bio) { + bl->head = bl->head->bi_next; + if (!bl->head) + bl->tail = NULL; + + bio->bi_next = NULL; + } + + return bio; +} + +static inline struct bio *bio_list_get(struct bio_list *bl) +{ + struct bio *bio = bl->head; + + bl->head = bl->tail = NULL; + + return bio; +} + #if defined(CONFIG_BLK_DEV_INTEGRITY) #define bip_vec_idx(bip, idx) (&(bip->bip_vec[(idx)])) -- cgit v1.2.3 From 48e70bc18ac81881dedd3aa327c55b924fc41ecf Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 14 Apr 2009 08:19:27 +0200 Subject: Document and move the various READ/WRITE types It's a somewhat twisty maze of hints and behavioural modifiers, try and clear it up a bit with some documentation. Signed-off-by: Jens Axboe --- include/linux/fs.h | 59 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 562d2855cf30..b535aec4406b 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -87,6 +87,60 @@ struct inodes_stat_t { */ #define FMODE_NOCMTIME ((__force fmode_t)2048) +/* + * The below are the various read and write types that we support. Some of + * them include behavioral modifiers that send information down to the + * block layer and IO scheduler. Terminology: + * + * The block layer uses device plugging to defer IO a little bit, in + * the hope that we will see more IO very shortly. This increases + * coalescing of adjacent IO and thus reduces the number of IOs we + * have to send to the device. It also allows for better queuing, + * if the IO isn't mergeable. If the caller is going to be waiting + * for the IO, then he must ensure that the device is unplugged so + * that the IO is dispatched to the driver. + * + * All IO is handled async in Linux. This is fine for background + * writes, but for reads or writes that someone waits for completion + * on, we want to notify the block layer and IO scheduler so that they + * know about it. That allows them to make better scheduling + * decisions. So when the below references 'sync' and 'async', it + * is referencing this priority hint. + * + * With that in mind, the available types are: + * + * READ A normal read operation. Device will be plugged. + * READ_SYNC A synchronous read. Device is not plugged, caller can + * immediately wait on this read without caring about + * unplugging. + * READA Used for read-ahead operations. Lower priority, and the + * block layer could (in theory) choose to ignore this + * request if it runs into resource problems. + * WRITE A normal async write. Device will be plugged. + * SWRITE Like WRITE, but a special case for ll_rw_block() that + * tells it to lock the buffer first. Normally a buffer + * must be locked before doing IO. + * WRITE_SYNC_PLUG Synchronous write. Identical to WRITE, but passes down + * the hint that someone will be waiting on this IO + * shortly. The device must still be unplugged explicitly, + * WRITE_SYNC_PLUG does not do this as we could be + * submitting more writes before we actually wait on any + * of them. + * WRITE_SYNC Like WRITE_SYNC_PLUG, but also unplugs the device + * immediately after submission. The write equivalent + * of READ_SYNC. + * WRITE_ODIRECT Special case write for O_DIRECT only. + * SWRITE_SYNC + * SWRITE_SYNC_PLUG Like WRITE_SYNC/WRITE_SYNC_PLUG, but locks the buffer. + * See SWRITE. + * WRITE_BARRIER Like WRITE, but tells the block layer that all + * previously submitted writes must be safely on storage + * before this one is started. Also guarantees that when + * this write is complete, it itself is also safely on + * storage. Prevents reordering of writes on both sides + * of this IO. + * + */ #define RW_MASK 1 #define RWA_MASK 2 #define READ 0 @@ -102,6 +156,11 @@ struct inodes_stat_t { (SWRITE | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_NOIDLE)) #define SWRITE_SYNC (SWRITE_SYNC_PLUG | (1 << BIO_RW_UNPLUG)) #define WRITE_BARRIER (WRITE | (1 << BIO_RW_BARRIER)) + +/* + * These aren't really reads or writes, they pass down information about + * parts of device that are now unused by the file system. + */ #define DISCARD_NOBARRIER (1 << BIO_RW_DISCARD) #define DISCARD_BARRIER ((1 << BIO_RW_DISCARD) | (1 << BIO_RW_BARRIER)) -- cgit v1.2.3 From b3c2d2ddd63944ef2a1e4a43077b602288107e01 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 14 Apr 2009 19:48:36 +0200 Subject: splice: split up __splice_from_pipe() Split up __splice_from_pipe() into four helper functions: splice_from_pipe_begin() splice_from_pipe_next() splice_from_pipe_feed() splice_from_pipe_end() splice_from_pipe_next() will wait (if necessary) for more buffers to be added to the pipe. splice_from_pipe_feed() will feed the buffers to the supplied actor and return when there's no more data available (or if all of the requested data has been copied). This is necessary so that implementations can do locking around the non-waiting splice_from_pipe_feed(). This patch should not cause any change in behavior. Signed-off-by: Miklos Szeredi Signed-off-by: Jens Axboe --- include/linux/splice.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux') diff --git a/include/linux/splice.h b/include/linux/splice.h index 528dcb93c2f2..8fc2a635586e 100644 --- a/include/linux/splice.h +++ b/include/linux/splice.h @@ -36,6 +36,8 @@ struct splice_desc { void *data; /* cookie */ } u; loff_t pos; /* file position */ + size_t num_spliced; /* number of bytes already spliced */ + bool need_wakeup; /* need to wake up writer */ }; struct partial_page { @@ -66,6 +68,14 @@ extern ssize_t splice_from_pipe(struct pipe_inode_info *, struct file *, splice_actor *); extern ssize_t __splice_from_pipe(struct pipe_inode_info *, struct splice_desc *, splice_actor *); +extern int splice_from_pipe_feed(struct pipe_inode_info *, struct splice_desc *, + splice_actor *); +extern int splice_from_pipe_next(struct pipe_inode_info *, + struct splice_desc *); +extern void splice_from_pipe_begin(struct splice_desc *); +extern void splice_from_pipe_end(struct pipe_inode_info *, + struct splice_desc *); + extern ssize_t splice_to_pipe(struct pipe_inode_info *, struct splice_pipe_desc *); extern ssize_t splice_direct_to_actor(struct file *, struct splice_desc *, -- cgit v1.2.3 From 328eaaba4e41a04c1dc4679d65bea3fee4349d86 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 14 Apr 2009 19:48:39 +0200 Subject: ocfs2: fix i_mutex locking in ocfs2_splice_to_file() Rearrange locking of i_mutex on destination and call to ocfs2_rw_lock() so locks are only held while buffers are copied with the pipe_to_file() actor, and not while waiting for more data on the pipe. Signed-off-by: Miklos Szeredi Signed-off-by: Jens Axboe --- include/linux/splice.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/splice.h b/include/linux/splice.h index 8fc2a635586e..5f3faa9d15ae 100644 --- a/include/linux/splice.h +++ b/include/linux/splice.h @@ -75,6 +75,8 @@ extern int splice_from_pipe_next(struct pipe_inode_info *, extern void splice_from_pipe_begin(struct splice_desc *); extern void splice_from_pipe_end(struct pipe_inode_info *, struct splice_desc *); +extern int pipe_to_file(struct pipe_inode_info *, struct pipe_buffer *, + struct splice_desc *); extern ssize_t splice_to_pipe(struct pipe_inode_info *, struct splice_pipe_desc *); -- cgit v1.2.3 From f8cc774ce4844811a55e2352f1443055e3994e28 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 14 Apr 2009 19:48:40 +0200 Subject: splice: remove generic_file_splice_write_nolock() Remove the now unused generic_file_splice_write_nolock() function. It's conceptually broken anyway, because splice may need to wait for pipe events so holding locks across the whole operation is wrong. Signed-off-by: Miklos Szeredi Signed-off-by: Jens Axboe --- include/linux/fs.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index b535aec4406b..907d8f56c6fa 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2209,8 +2209,6 @@ extern ssize_t generic_file_splice_read(struct file *, loff_t *, struct pipe_inode_info *, size_t, unsigned int); extern ssize_t generic_file_splice_write(struct pipe_inode_info *, struct file *, loff_t *, size_t, unsigned int); -extern ssize_t generic_file_splice_write_nolock(struct pipe_inode_info *, - struct file *, loff_t *, size_t, unsigned int); extern ssize_t generic_splice_sendpage(struct pipe_inode_info *pipe, struct file *out, loff_t *, size_t len, unsigned int flags); extern long do_splice_direct(struct file *in, loff_t *ppos, struct file *out, -- cgit v1.2.3 From 61e0d47c33cc371f725bcda4a47ae0efe652dba8 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 14 Apr 2009 19:48:41 +0200 Subject: splice: add helpers for locking pipe inode There are lots of sequences like this, especially in splice code: if (pipe->inode) mutex_lock(&pipe->inode->i_mutex); /* do something */ if (pipe->inode) mutex_unlock(&pipe->inode->i_mutex); so introduce helpers which do the conditional locking and unlocking. Also replace the inode_double_lock() call with a pipe_double_lock() helper to avoid spreading the use of this functionality beyond the pipe code. This patch is just a cleanup, and should cause no behavioral changes. Signed-off-by: Miklos Szeredi Signed-off-by: Jens Axboe --- include/linux/fs.h | 3 --- include/linux/pipe_fs_i.h | 5 +++++ 2 files changed, 5 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 907d8f56c6fa..e766be0d4329 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -797,9 +797,6 @@ enum inode_i_mutex_lock_class I_MUTEX_QUOTA }; -extern void inode_double_lock(struct inode *inode1, struct inode *inode2); -extern void inode_double_unlock(struct inode *inode1, struct inode *inode2); - /* * NOTE: in a 32bit arch with a preemptable kernel and * an UP compile the i_size_read/write must be atomic diff --git a/include/linux/pipe_fs_i.h b/include/linux/pipe_fs_i.h index 8e4120285f72..c8f038554e80 100644 --- a/include/linux/pipe_fs_i.h +++ b/include/linux/pipe_fs_i.h @@ -134,6 +134,11 @@ struct pipe_buf_operations { memory allocation, whereas PIPE_BUF makes atomicity guarantees. */ #define PIPE_SIZE PAGE_SIZE +/* Pipe lock and unlock operations */ +void pipe_lock(struct pipe_inode_info *); +void pipe_unlock(struct pipe_inode_info *); +void pipe_double_lock(struct pipe_inode_info *, struct pipe_inode_info *); + /* Drop the inode semaphore and wait for a pipe event, atomically */ void pipe_wait(struct pipe_inode_info *pipe); -- cgit v1.2.3 From 35c80d5f400f68f2eccf3069d1c068e154bde9c9 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Wed, 15 Apr 2009 13:22:38 -0400 Subject: Add block_write_full_page_endio for passing endio handler block_write_full_page doesn't allow the caller to control what happens when the IO is over. This adds a new call named block_write_full_page_endio so the buffer head end_io handler can be provided by the caller. This will be used by the ext3 data=guarded mode to do i_size updates in a workqueue based end_io handler. end_buffer_async_write is also exported so it can be called to do the dirty work of managing page writeback for the higher level end_io handler. Signed-off-by: Chris Mason Acked-by: Theodore Tso Acked-by: Jan Kara Signed-off-by: Linus Torvalds --- include/linux/buffer_head.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/buffer_head.h b/include/linux/buffer_head.h index 7b73bb8f1970..16ed0284d780 100644 --- a/include/linux/buffer_head.h +++ b/include/linux/buffer_head.h @@ -155,6 +155,7 @@ void create_empty_buffers(struct page *, unsigned long, unsigned long b_state); void end_buffer_read_sync(struct buffer_head *bh, int uptodate); void end_buffer_write_sync(struct buffer_head *bh, int uptodate); +void end_buffer_async_write(struct buffer_head *bh, int uptodate); /* Things to do with buffers at mapping->private_list */ void mark_buffer_dirty_inode(struct buffer_head *bh, struct inode *inode); @@ -197,6 +198,8 @@ extern int buffer_heads_over_limit; void block_invalidatepage(struct page *page, unsigned long offset); int block_write_full_page(struct page *page, get_block_t *get_block, struct writeback_control *wbc); +int block_write_full_page_endio(struct page *page, get_block_t *get_block, + struct writeback_control *wbc, bh_end_io_t *handler); int block_read_full_page(struct page*, get_block_t*); int block_is_partially_uptodate(struct page *page, read_descriptor_t *desc, unsigned long from); -- cgit v1.2.3 From e3cf95dd6d352954b663d2934110d6e30af2406d Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 9 Apr 2009 17:31:17 +0100 Subject: ata: Report 16/32bit PIO as best we can The legacy old IDE ioctl API for this is a bit primitive so we try and map stuff sensibly onto it. - Set PIO over DMA devices to report 32bit - Add ability to change the PIO32 settings if the controller permits it - Add that functionality into the sff drivers - Add that functionality into the VLB legacy driver - Turn on the 32bit PIO on the ninja32 and add support there Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- include/linux/libata.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/libata.h b/include/linux/libata.h index b450a2628855..3d501db36a26 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -209,6 +209,7 @@ enum { /* bits 24:31 of ap->flags are reserved for LLD specific flags */ + /* struct ata_port pflags */ ATA_PFLAG_EH_PENDING = (1 << 0), /* EH pending */ ATA_PFLAG_EH_IN_PROGRESS = (1 << 1), /* EH in progress */ @@ -225,6 +226,9 @@ enum { ATA_PFLAG_PM_PENDING = (1 << 18), /* PM operation pending */ ATA_PFLAG_INIT_GTM_VALID = (1 << 19), /* initial gtm data valid */ + ATA_PFLAG_PIO32 = (1 << 20), /* 32bit PIO */ + ATA_PFLAG_PIO32CHANGE = (1 << 21), /* 32bit PIO can be turned on/off */ + /* struct ata_queued_cmd flags */ ATA_QCFLAG_ACTIVE = (1 << 0), /* cmd not yet ack'd to scsi lyer */ ATA_QCFLAG_DMAMAP = (1 << 1), /* SG table is DMA mapped */ @@ -689,7 +693,10 @@ struct ata_port { struct Scsi_Host *scsi_host; /* our co-allocated scsi host */ struct ata_port_operations *ops; spinlock_t *lock; + /* Flags owned by the EH context. Only EH should touch these once the + port is active */ unsigned long flags; /* ATA_FLAG_xxx */ + /* Flags that change dynamically, protected by ap->lock */ unsigned int pflags; /* ATA_PFLAG_xxx */ unsigned int print_id; /* user visible unique port ID */ unsigned int port_no; /* 0 based port no. inside the host */ @@ -1595,6 +1602,7 @@ extern void ata_sff_drain_fifo(struct ata_queued_cmd *qc); extern void ata_sff_error_handler(struct ata_port *ap); extern void ata_sff_post_internal_cmd(struct ata_queued_cmd *qc); extern int ata_sff_port_start(struct ata_port *ap); +extern int ata_sff_port_start32(struct ata_port *ap); extern void ata_sff_std_ports(struct ata_ioports *ioaddr); extern unsigned long ata_bmdma_mode_filter(struct ata_device *dev, unsigned long xfer_mask); -- cgit v1.2.3 From 13977091a988fb0d21821c2221ddc920eba36b79 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 30 Mar 2009 14:37:25 -0700 Subject: Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm Cc: Paul Mundt Cc: Kay Sievers Cc: David Brownell Cc: Tejun Heo Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- include/linux/init.h | 1 + include/linux/platform_device.h | 42 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 43 insertions(+) (limited to 'include/linux') diff --git a/include/linux/init.h b/include/linux/init.h index 68cb0265d009..f121a7a10c3d 100644 --- a/include/linux/init.h +++ b/include/linux/init.h @@ -247,6 +247,7 @@ struct obs_kernel_param { /* Relies on boot_command_line being set */ void __init parse_early_param(void); +void __init parse_early_options(char *cmdline); #endif /* __ASSEMBLY__ */ /** diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h index 76e470a299bf..72736fd8223c 100644 --- a/include/linux/platform_device.h +++ b/include/linux/platform_device.h @@ -77,4 +77,46 @@ extern int platform_driver_probe(struct platform_driver *driver, #define platform_get_drvdata(_dev) dev_get_drvdata(&(_dev)->dev) #define platform_set_drvdata(_dev,data) dev_set_drvdata(&(_dev)->dev, (data)) +/* early platform driver interface */ +struct early_platform_driver { + const char *class_str; + struct platform_driver *pdrv; + struct list_head list; + int requested_id; +}; + +#define EARLY_PLATFORM_ID_UNSET -2 +#define EARLY_PLATFORM_ID_ERROR -3 + +extern int early_platform_driver_register(struct early_platform_driver *epdrv, + char *buf); +extern void early_platform_add_devices(struct platform_device **devs, int num); + +static inline int is_early_platform_device(struct platform_device *pdev) +{ + return !pdev->dev.driver; +} + +extern void early_platform_driver_register_all(char *class_str); +extern int early_platform_driver_probe(char *class_str, + int nr_probe, int user_only); +extern void early_platform_cleanup(void); + + +#ifndef MODULE +#define early_platform_init(class_string, platform_driver) \ +static __initdata struct early_platform_driver early_driver = { \ + .class_str = class_string, \ + .pdrv = platform_driver, \ + .requested_id = EARLY_PLATFORM_ID_UNSET, \ +}; \ +static int __init early_platform_driver_setup_func(char *buf) \ +{ \ + return early_platform_driver_register(&early_driver, buf); \ +} \ +early_param(class_string, early_platform_driver_setup_func) +#else /* MODULE */ +#define early_platform_init(class_string, platform_driver) +#endif /* MODULE */ + #endif /* _PLATFORM_DEVICE_H_ */ -- cgit v1.2.3 From 4ccb457966391295bd9b3644f6bdc9ddd97b6051 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 9 Apr 2009 14:48:24 -0700 Subject: dynamic debug: resurrect old pr_debug() semantics as pr_devel() pr_debug() used to produce zero code unless DEBUG was #defined. This is now no longer the case in practice[1]. There are places where it's useful to have debugging printks, but we don't want them to generate any code in production kernels. So add a new macro, pr_devel(), for _devel_opment, to provide the old semantics, ie. if the programmer doesn't explicitly enable debugging, no code is produced. [1]: You can turn CONFIG_DYNAMIC_DEBUG off, but it's enabled in at least one distro kernel, so it's not really a solution. Signed-off-by: Michael Ellerman Cc: Jason Baron Cc: Greg Banks Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- include/linux/kernel.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/linux') diff --git a/include/linux/kernel.h b/include/linux/kernel.h index d9e75ec7def5..883cd44ff765 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -377,6 +377,15 @@ static inline char *pack_hex_byte(char *buf, u8 byte) #define pr_cont(fmt, ...) \ printk(KERN_CONT fmt, ##__VA_ARGS__) +/* pr_devel() should produce zero code unless DEBUG is defined */ +#ifdef DEBUG +#define pr_devel(fmt, ...) \ + printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__) +#else +#define pr_devel(fmt, ...) \ + ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; }) +#endif + /* If you are writing a driver, please use dev_dbg instead */ #if defined(DEBUG) #define pr_debug(fmt, ...) \ -- cgit v1.2.3 From 7607b1d673469d5b5dce4c9b6779d165e03c8ff5 Mon Sep 17 00:00:00 2001 From: Jason Baron Date: Wed, 8 Apr 2009 12:12:52 -0400 Subject: Driver core: remove pr_fmt() from dynamic_dev_dbg() printk When pr_fmt() was added to the pr_debug() code, we added it not only to the dynamic_pr_debug() function, but also to the dynamic_dev_dbg() funciton. However, dev_dbg() doesn't make use of pr_fmt(), so neither should dynamic_dev_dbg(). Signed-off-by: Jason Baron Signed-off-by: Greg Kroah-Hartman --- include/linux/dynamic_debug.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/dynamic_debug.h b/include/linux/dynamic_debug.h index baabf33be244..a0d9422a1569 100644 --- a/include/linux/dynamic_debug.h +++ b/include/linux/dynamic_debug.h @@ -70,7 +70,7 @@ extern int ddebug_remove_module(char *mod_name); DEBUG_HASH2, __LINE__, _DPRINTK_FLAGS_DEFAULT }; \ if (__dynamic_dbg_enabled(descriptor)) \ dev_printk(KERN_DEBUG, dev, \ - KBUILD_MODNAME ": " pr_fmt(fmt),\ + KBUILD_MODNAME ": " fmt, \ ##__VA_ARGS__); \ } while (0) -- cgit v1.2.3 From 3444b26afa145148951112534f298bdc554ec789 Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Wed, 8 Apr 2009 17:36:28 +0000 Subject: USB: add reset endpoint operations Wireless USB endpoint state has a sequence number and a current window and not just a single toggle bit. So allow HCDs to provide a endpoint_reset method and call this or clear the software toggles as required (after a clear halt, set configuration etc.). usb_settoggle() and friends are then HCD internal and are moved into core/hcd.h and all device drivers call usb_reset_endpoint() instead. If the device endpoint state has been reset (with a clear halt) but the host endpoint state has not then subsequent data transfers will not complete. The device will only work again after it is reset or disconnected. Signed-off-by: David Vrabel Signed-off-by: Greg Kroah-Hartman --- include/linux/usb.h | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb.h b/include/linux/usb.h index c6b2ab41b908..3aa2cd1f8d08 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -1387,6 +1387,7 @@ extern int usb_string(struct usb_device *dev, int index, extern int usb_clear_halt(struct usb_device *dev, int pipe); extern int usb_reset_configuration(struct usb_device *dev); extern int usb_set_interface(struct usb_device *dev, int ifnum, int alternate); +extern void usb_reset_endpoint(struct usb_device *dev, unsigned int epaddr); /* this request isn't really synchronous, but it belongs with the others */ extern int usb_driver_set_configuration(struct usb_device *udev, int config); @@ -1491,14 +1492,6 @@ void usb_sg_wait(struct usb_sg_request *io); #define usb_pipecontrol(pipe) (usb_pipetype((pipe)) == PIPE_CONTROL) #define usb_pipebulk(pipe) (usb_pipetype((pipe)) == PIPE_BULK) -/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */ -#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1) -#define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << (ep))) -#define usb_settoggle(dev, ep, out, bit) \ - ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \ - ((bit) << (ep))) - - static inline unsigned int __create_pipe(struct usb_device *dev, unsigned int endpoint) { -- cgit v1.2.3 From 42a17ad2762f465d291c3bc0b6ed2b3738f65481 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 18 Apr 2009 11:30:56 +0200 Subject: needs to include . uses EINVAL so should include . This fixes a build error on 64-bit MIPS if CONFIG_SECCOMP is disabled. Signed-off-by: Ralf Baechle Signed-off-by: Linus Torvalds --- include/linux/seccomp.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/seccomp.h b/include/linux/seccomp.h index 262a8dccfa81..167c33361d9c 100644 --- a/include/linux/seccomp.h +++ b/include/linux/seccomp.h @@ -21,6 +21,8 @@ extern long prctl_set_seccomp(unsigned long); #else /* CONFIG_SECCOMP */ +#include + typedef struct { } seccomp_t; #define secure_computing(x) do { } while (0) -- cgit v1.2.3 From 6a7c7eaf71b636f197d73b381a2ab729ebdcfb2e Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 19 Apr 2009 20:08:42 +0200 Subject: PM/Suspend: Introduce two new platform callbacks to avoid breakage Commit 900af0d973856d6feb6fc088c2d0d3fde57707d3 (PM: Change suspend code ordering) changed the ordering of suspend code in such a way that the platform .prepare() callback is now executed after the device drivers' late suspend callbacks have run. Unfortunately, this turns out to break ARM platforms that need to talk via I2C to power control devices during the .prepare() callback. For this reason introduce two new platform suspend callbacks, .prepare_late() and .wake(), that will be called just prior to disabling non-boot CPUs and right after bringing them back on line, respectively, and use them instead of .prepare() and .finish() for ACPI suspend. Make the PM core execute the .prepare() and .finish() platform suspend callbacks where they were executed previously (that is, right after calling the regular suspend methods provided by device drivers and right before executing their regular resume methods, respectively). It is not necessary to make analogous changes to the hibernation code and data structures at the moment, because they are only used by ACPI platforms. Signed-off-by: Rafael J. Wysocki Reported-by: Russell King Acked-by: Len Brown --- include/linux/suspend.h | 36 ++++++++++++++++++++++++++---------- 1 file changed, 26 insertions(+), 10 deletions(-) (limited to 'include/linux') diff --git a/include/linux/suspend.h b/include/linux/suspend.h index 3e3a4364cbff..795032edfc46 100644 --- a/include/linux/suspend.h +++ b/include/linux/suspend.h @@ -58,10 +58,17 @@ typedef int __bitwise suspend_state_t; * by @begin(). * @prepare() is called right after devices have been suspended (ie. the * appropriate .suspend() method has been executed for each device) and - * before the nonboot CPUs are disabled (it is executed with IRQs enabled). - * This callback is optional. It returns 0 on success or a negative - * error code otherwise, in which case the system cannot enter the desired - * sleep state (@enter() and @finish() will not be called in that case). + * before device drivers' late suspend callbacks are executed. It returns + * 0 on success or a negative error code otherwise, in which case the + * system cannot enter the desired sleep state (@prepare_late(), @enter(), + * @wake(), and @finish() will not be called in that case). + * + * @prepare_late: Finish preparing the platform for entering the system sleep + * state indicated by @begin(). + * @prepare_late is called before disabling nonboot CPUs and after + * device drivers' late suspend callbacks have been executed. It returns + * 0 on success or a negative error code otherwise, in which case the + * system cannot enter the desired sleep state (@enter() and @wake()). * * @enter: Enter the system sleep state indicated by @begin() or represented by * the argument if @begin() is not implemented. @@ -69,19 +76,26 @@ typedef int __bitwise suspend_state_t; * error code otherwise, in which case the system cannot enter the desired * sleep state. * - * @finish: Called when the system has just left a sleep state, right after - * the nonboot CPUs have been enabled and before devices are resumed (it is - * executed with IRQs enabled). + * @wake: Called when the system has just left a sleep state, right after + * the nonboot CPUs have been enabled and before device drivers' early + * resume callbacks are executed. + * This callback is optional, but should be implemented by the platforms + * that implement @prepare_late(). If implemented, it is always called + * after @enter(), even if @enter() fails. + * + * @finish: Finish wake-up of the platform. + * @finish is called right prior to calling device drivers' regular suspend + * callbacks. * This callback is optional, but should be implemented by the platforms * that implement @prepare(). If implemented, it is always called after - * @enter() (even if @enter() fails). + * @enter() and @wake(), if implemented, even if any of them fails. * * @end: Called by the PM core right after resuming devices, to indicate to * the platform that the system has returned to the working state or * the transition to the sleep state has been aborted. * This callback is optional, but should be implemented by the platforms - * that implement @begin(), but platforms implementing @begin() should - * also provide a @end() which cleans up transitions aborted before + * that implement @begin(). Accordingly, platforms implementing @begin() + * should also provide a @end() which cleans up transitions aborted before * @enter(). * * @recover: Recover the platform from a suspend failure. @@ -93,7 +107,9 @@ struct platform_suspend_ops { int (*valid)(suspend_state_t state); int (*begin)(suspend_state_t state); int (*prepare)(void); + int (*prepare_late)(void); int (*enter)(suspend_state_t state); + void (*wake)(void); void (*finish)(void); void (*end)(void); void (*recover)(void); -- cgit v1.2.3 From 0112fc2229847feb6c4eb011e6833d8f1742a375 Mon Sep 17 00:00:00 2001 From: Oleg Drokin Date: Wed, 8 Apr 2009 20:05:42 +0400 Subject: Separate out common fstatat code into vfs_fstatat This is a version incorporating Christoph's suggestion. Separate out common *fstatat functionality into a single function instead of duplicating it all over the code. Signed-off-by: Oleg Drokin Signed-off-by: Al Viro --- include/linux/fs.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index e766be0d4329..257f4d37ad23 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2302,6 +2302,7 @@ extern int vfs_lstat(char __user *, struct kstat *); extern int vfs_stat_fd(int dfd, char __user *, struct kstat *); extern int vfs_lstat_fd(int dfd, char __user *, struct kstat *); extern int vfs_fstat(unsigned int, struct kstat *); +extern int vfs_fstatat(int , char __user *, struct kstat *, int); extern int do_vfs_ioctl(struct file *filp, unsigned int fd, unsigned int cmd, unsigned long arg); -- cgit v1.2.3 From 2eae7a1874ca5be3232765d89e0250a449f1bc90 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 8 Apr 2009 16:34:03 -0400 Subject: kill vfs_stat_fd / vfs_lstat_fd There's really no reason to keep vfs_stat_fd and vfs_lstat_fd with Oleg's vfs_fstatat. Use vfs_fstatat for the few cases having the directory fd, and switch all others to vfs_stat / vfs_lstat. Reviewed-by: Christoph Hellwig Signed-off-by: Al Viro --- include/linux/fs.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 257f4d37ad23..8f42b35a7565 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2299,8 +2299,6 @@ extern int vfs_readdir(struct file *, filldir_t, void *); extern int vfs_stat(char __user *, struct kstat *); extern int vfs_lstat(char __user *, struct kstat *); -extern int vfs_stat_fd(int dfd, char __user *, struct kstat *); -extern int vfs_lstat_fd(int dfd, char __user *, struct kstat *); extern int vfs_fstat(unsigned int, struct kstat *); extern int vfs_fstatat(int , char __user *, struct kstat *, int); -- cgit v1.2.3 From 38e23c95f92a84fb8505a9f572b8a209c9c372c1 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Thu, 9 Apr 2009 20:17:52 +0900 Subject: fs: Mark get_filesystem_list() as __init function. "int get_filesystem_list(char * buf)" is called by only "static void __init get_fs_names(char *page)". We can mark get_filesystem_list() as "__init". Signed-off-by: Tetsuo Handa Signed-off-by: Al Viro --- include/linux/fs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 8f42b35a7565..5bed436f4353 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2448,7 +2448,7 @@ struct ctl_table; int proc_nr_files(struct ctl_table *table, int write, struct file *filp, void __user *buffer, size_t *lenp, loff_t *ppos); -int get_filesystem_list(char * buf); +int __init get_filesystem_list(char *buf); #endif /* __KERNEL__ */ #endif /* _LINUX_FS_H */ -- cgit v1.2.3 From be9208dff23af904655807672dd8235abf6ac039 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 20 Apr 2009 23:29:41 -0400 Subject: reiserfs: fix j_last_flush_trans_id type Conversion in commit 600ed41675d8c384519d8f0b3c76afed39ef2f4b had missed that one, but converted format from %lu to %u. As the result, /proc/..../journal got buggered on 64bit boxen. Signed-off-by: Al Viro --- include/linux/reiserfs_fs_sb.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/reiserfs_fs_sb.h b/include/linux/reiserfs_fs_sb.h index 5621d87c4479..6b361d23a499 100644 --- a/include/linux/reiserfs_fs_sb.h +++ b/include/linux/reiserfs_fs_sb.h @@ -193,7 +193,7 @@ struct reiserfs_journal { atomic_t j_wcount; /* count of writers for current commit */ unsigned long j_bcount; /* batch count. allows turning X transactions into 1 */ unsigned long j_first_unflushed_offset; /* first unflushed transactions offset */ - unsigned long j_last_flush_trans_id; /* last fully flushed journal timestamp */ + unsigned j_last_flush_trans_id; /* last fully flushed journal timestamp */ struct buffer_head *j_header_bh; time_t j_trans_start_time; /* time this transaction started */ -- cgit v1.2.3 From 8b9cf76d0fa6cd98fe42dd2f86460d6ede55fed8 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Tue, 21 Apr 2009 13:44:13 +0200 Subject: Fix SYSCALL_ALIAS for older MIPS assembler Older MIPS assembler don't support .set for defining aliases. Using = works for old and new assembers. Signed-off-by: Thomas Bogendoerfer Acked-by: Ralf Baechle Signed-off-by: Linus Torvalds --- include/linux/syscalls.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index dabe4ad89141..40617c1d8976 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -148,7 +148,7 @@ struct old_linux_dirent; asm ("\t.globl " #alias "\n\t.set " #alias ", " #name "\n" \ "\t.globl ." #alias "\n\t.set ." #alias ", ." #name) #else -#ifdef CONFIG_ALPHA +#if defined(CONFIG_ALPHA) || defined(CONFIG_MIPS) #define SYSCALL_ALIAS(alias, name) \ asm ( #alias " = " #name "\n\t.globl " #alias) #else -- cgit v1.2.3 From 8e19608e8b5c001e4a66ce482edc474f05fb7355 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 21 Apr 2009 12:24:00 -0700 Subject: clocksource: pass clocksource to read() callback Pass clocksource pointer to the read() callback for clocksources. This allows us to share the callback between multiple instances. [hugh@veritas.com: fix powerpc build of clocksource pass clocksource mods] [akpm@linux-foundation.org: cleanup] Signed-off-by: Magnus Damm Acked-by: John Stultz Cc: Thomas Gleixner Signed-off-by: Hugh Dickins Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/clocksource.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index 573819ef4cc0..0d96cde9ee5d 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -143,7 +143,7 @@ extern u64 timecounter_cyc2time(struct timecounter *tc, * 400-499: Perfect * The ideal clocksource. A must-use where * available. - * @read: returns a cycle value + * @read: returns a cycle value, passes clocksource as argument * @mask: bitmask for two's complement * subtraction of non 64 bit counters * @mult: cycle to nanosecond multiplier (adjusted by NTP) @@ -162,7 +162,7 @@ struct clocksource { char *name; struct list_head list; int rating; - cycle_t (*read)(void); + cycle_t (*read)(struct clocksource *cs); cycle_t mask; u32 mult; u32 mult_orig; @@ -271,7 +271,7 @@ static inline u32 clocksource_hz2mult(u32 hz, u32 shift_constant) */ static inline cycle_t clocksource_read(struct clocksource *cs) { - return cs->read(); + return cs->read(cs); } /** -- cgit v1.2.3 From 4614e6adafa2c5e6c3a9c245af2807fa7bc5117a Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 21 Apr 2009 12:24:02 -0700 Subject: clocksource: add enable() and disable() callbacks Add enable() and disable() callbacks for clocksources. This allows us to put unused clocksources in power save mode. The functions clocksource_enable() and clocksource_disable() wrap the callbacks and are inserted in the timekeeping code to enable before use and disable after switching to a new clocksource. Signed-off-by: Magnus Damm Acked-by: John Stultz Cc: Thomas Gleixner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/clocksource.h | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) (limited to 'include/linux') diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index 0d96cde9ee5d..5a40d14daa9f 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -144,6 +144,8 @@ extern u64 timecounter_cyc2time(struct timecounter *tc, * The ideal clocksource. A must-use where * available. * @read: returns a cycle value, passes clocksource as argument + * @enable: optional function to enable the clocksource + * @disable: optional function to disable the clocksource * @mask: bitmask for two's complement * subtraction of non 64 bit counters * @mult: cycle to nanosecond multiplier (adjusted by NTP) @@ -163,6 +165,8 @@ struct clocksource { struct list_head list; int rating; cycle_t (*read)(struct clocksource *cs); + int (*enable)(struct clocksource *cs); + void (*disable)(struct clocksource *cs); cycle_t mask; u32 mult; u32 mult_orig; @@ -274,6 +278,33 @@ static inline cycle_t clocksource_read(struct clocksource *cs) return cs->read(cs); } +/** + * clocksource_enable: - enable clocksource + * @cs: pointer to clocksource + * + * Enables the specified clocksource. The clocksource callback + * function should start up the hardware and setup mult and field + * members of struct clocksource to reflect hardware capabilities. + */ +static inline int clocksource_enable(struct clocksource *cs) +{ + return cs->enable ? cs->enable(cs) : 0; +} + +/** + * clocksource_disable: - disable clocksource + * @cs: pointer to clocksource + * + * Disables the specified clocksource. The clocksource callback + * function should power down the now unused hardware block to + * save power. + */ +static inline void clocksource_disable(struct clocksource *cs) +{ + if (cs->disable) + cs->disable(cs); +} + /** * cyc2ns - converts clocksource cycles to nanoseconds * @cs: Pointer to clocksource -- cgit v1.2.3 From 40112ae7504745799e75ef418057f0d2cb745050 Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Tue, 21 Apr 2009 12:24:03 -0700 Subject: ipmi: test for event buffer before using The IPMI driver would attempt to use the event buffer even if that didn't exist on the BMC. This patch modified the IPMI driver to check for the event buffer's existence before trying to use it. Signed-off-by: Corey Minyard Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/ipmi_msgdefs.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ipmi_msgdefs.h b/include/linux/ipmi_msgdefs.h index b56a158d587a..a079f586e907 100644 --- a/include/linux/ipmi_msgdefs.h +++ b/include/linux/ipmi_msgdefs.h @@ -58,6 +58,12 @@ #define IPMI_READ_EVENT_MSG_BUFFER_CMD 0x35 #define IPMI_GET_CHANNEL_INFO_CMD 0x42 +/* Bit for BMC global enables. */ +#define IPMI_BMC_RCV_MSG_INTR 0x01 +#define IPMI_BMC_EVT_MSG_INTR 0x02 +#define IPMI_BMC_EVT_MSG_BUFF 0x04 +#define IPMI_BMC_SYS_LOG 0x08 + #define IPMI_NETFN_STORAGE_REQUEST 0x0a #define IPMI_NETFN_STORAGE_RESPONSE 0x0b #define IPMI_ADD_SEL_ENTRY_CMD 0x44 -- cgit v1.2.3 From 4dec302ff71ebf48f5784a2d2fc5e3745e6d4d52 Mon Sep 17 00:00:00 2001 From: dann frazier Date: Tue, 21 Apr 2009 12:24:05 -0700 Subject: ipmi: add oem message handling Enable userspace to receive messages that a BMC transmits using an OEM medium. This is used by the HP iLO2. Based on code originally written by Patrick Schoeller. Signed-off-by: dann frazier Signed-off-by: Corey Minyard Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/ipmi.h | 2 ++ include/linux/ipmi_msgdefs.h | 2 ++ 2 files changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ipmi.h b/include/linux/ipmi.h index 7ebdb4fb4e54..65aae34759de 100644 --- a/include/linux/ipmi.h +++ b/include/linux/ipmi.h @@ -198,6 +198,8 @@ struct kernel_ipmi_msg { response. When you send a response message, this will be returned. */ +#define IPMI_OEM_RECV_TYPE 5 /* The response for OEM Channels */ + /* Note that async events and received commands do not have a completion code as the first byte of the incoming data, unlike a response. */ diff --git a/include/linux/ipmi_msgdefs.h b/include/linux/ipmi_msgdefs.h index a079f586e907..df97e6e31e87 100644 --- a/include/linux/ipmi_msgdefs.h +++ b/include/linux/ipmi_msgdefs.h @@ -115,5 +115,7 @@ #define IPMI_CHANNEL_MEDIUM_USB1 10 #define IPMI_CHANNEL_MEDIUM_USB2 11 #define IPMI_CHANNEL_MEDIUM_SYSINTF 12 +#define IPMI_CHANNEL_MEDIUM_OEM_MIN 0x60 +#define IPMI_CHANNEL_MEDIUM_OEM_MAX 0x7f #endif /* __LINUX_IPMI_MSGDEFS_H */ -- cgit v1.2.3 From e638c1394010859a015a3b533ee452d768e62cea Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Tue, 21 Apr 2009 12:24:41 -0700 Subject: memcg: use rcu_dereference to access mm->owner mm->owner should be accessed with rcu_dereference(). Reported-by: KOSAKI Motohiro Signed-off-by: KAMEZAWA Hiroyuki Acked-by: Balbir Singh Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/memcontrol.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index 18146c980b68..a9e3b76aa884 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -75,7 +75,7 @@ int mm_match_cgroup(const struct mm_struct *mm, const struct mem_cgroup *cgroup) { struct mem_cgroup *mem; rcu_read_lock(); - mem = mem_cgroup_from_task((mm)->owner); + mem = mem_cgroup_from_task(rcu_dereference((mm)->owner)); rcu_read_unlock(); return cgroup == mem; } -- cgit v1.2.3 From 6e538aaf50ae782a890cbc02c27950448d8193e1 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 21 Apr 2009 12:24:49 -0700 Subject: spi: documentation: emphasise spi_master.setup() semantics This is a doc-only patch which I hope will reduce the number of spi_master controller driver patches starting out with a common implementation bug. (As in: almost every spi_master driver I see starts out with its version of this bug. Sigh.) It just re-emphasizes that the setup() method may be called for one device while a transfer is active on another ... which means that most driver implementations shouldn't touch any registers. Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/spi/spi.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 2cc43fa380cb..a0faa18f7b1b 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -245,7 +245,12 @@ struct spi_master { */ u16 dma_alignment; - /* setup mode and clock, etc (spi driver may call many times) */ + /* Setup mode and clock, etc (spi driver may call many times). + * + * IMPORTANT: this may be called when transfers to another + * device are active. DO NOT UPDATE SHARED REGISTERS in ways + * which could break those transfers. + */ int (*setup)(struct spi_device *spi); /* bidirectional bulk transfers -- cgit v1.2.3 From 9b8de7479d0dbab1ed98b5b015d44232c9d3d08e Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 21 Apr 2009 23:00:24 +0100 Subject: FRV: Fix the section attribute on UP DECLARE_PER_CPU() In non-SMP mode, the variable section attribute specified by DECLARE_PER_CPU() does not agree with that specified by DEFINE_PER_CPU(). This means that architectures that have a small data section references relative to a base register may throw up linkage errors due to too great a displacement between where the base register points and the per-CPU variable. On FRV, the .h declaration says that the variable is in the .sdata section, but the .c definition says it's actually in the .data section. The linker throws up the following errors: kernel/built-in.o: In function `release_task': kernel/exit.c:78: relocation truncated to fit: R_FRV_GPREL12 against symbol `per_cpu__process_counts' defined in .data section in kernel/built-in.o kernel/exit.c:78: relocation truncated to fit: R_FRV_GPREL12 against symbol `per_cpu__process_counts' defined in .data section in kernel/built-in.o To fix this, DECLARE_PER_CPU() should simply apply the same section attribute as does DEFINE_PER_CPU(). However, this is made slightly more complex by virtue of the fact that there are several variants on DEFINE, so these need to be matched by variants on DECLARE. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- include/linux/percpu.h | 24 ------------------------ 1 file changed, 24 deletions(-) (limited to 'include/linux') diff --git a/include/linux/percpu.h b/include/linux/percpu.h index cfda2d5ad319..f052d8184993 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -9,30 +9,6 @@ #include -#ifndef PER_CPU_BASE_SECTION -#ifdef CONFIG_SMP -#define PER_CPU_BASE_SECTION ".data.percpu" -#else -#define PER_CPU_BASE_SECTION ".data" -#endif -#endif - -#ifdef CONFIG_SMP - -#ifdef MODULE -#define PER_CPU_SHARED_ALIGNED_SECTION "" -#else -#define PER_CPU_SHARED_ALIGNED_SECTION ".shared_aligned" -#endif -#define PER_CPU_FIRST_SECTION ".first" - -#else - -#define PER_CPU_SHARED_ALIGNED_SECTION "" -#define PER_CPU_FIRST_SECTION "" - -#endif - #define DEFINE_PER_CPU_SECTION(type, name, section) \ __attribute__((__section__(PER_CPU_BASE_SECTION section))) \ PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name -- cgit v1.2.3 From 5028eaa97dd1dab9cd7c30c4d38f71c708ca64bc Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 21 Apr 2009 23:00:29 +0100 Subject: PERCPU: Collect the DECLARE/DEFINE declarations together Collect the DECLARE/DEFINE declarations together in linux/percpu-defs.h so that they're in one place, and give them descriptive comments, particularly the SHARED_ALIGNED variant. It would be nice to collect these in linux/percpu.h, but that's not possible without sorting out the severe #include recursion between the x86 arch headers and the general headers (and possibly other arches too). Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- include/linux/percpu-defs.h | 84 +++++++++++++++++++++++++++++++++++++++++++++ include/linux/percpu.h | 20 ----------- 2 files changed, 84 insertions(+), 20 deletions(-) create mode 100644 include/linux/percpu-defs.h (limited to 'include/linux') diff --git a/include/linux/percpu-defs.h b/include/linux/percpu-defs.h new file mode 100644 index 000000000000..8f921d74f49f --- /dev/null +++ b/include/linux/percpu-defs.h @@ -0,0 +1,84 @@ +#ifndef _LINUX_PERCPU_DEFS_H +#define _LINUX_PERCPU_DEFS_H + +/* + * Determine the real variable name from the name visible in the + * kernel sources. + */ +#define per_cpu_var(var) per_cpu__##var + +/* + * Base implementations of per-CPU variable declarations and definitions, where + * the section in which the variable is to be placed is provided by the + * 'section' argument. This may be used to affect the parameters governing the + * variable's storage. + * + * NOTE! The sections for the DECLARE and for the DEFINE must match, lest + * linkage errors occur due the compiler generating the wrong code to access + * that section. + */ +#define DECLARE_PER_CPU_SECTION(type, name, section) \ + extern \ + __attribute__((__section__(PER_CPU_BASE_SECTION section))) \ + PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name + +#define DEFINE_PER_CPU_SECTION(type, name, section) \ + __attribute__((__section__(PER_CPU_BASE_SECTION section))) \ + PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name + +/* + * Variant on the per-CPU variable declaration/definition theme used for + * ordinary per-CPU variables. + */ +#define DECLARE_PER_CPU(type, name) \ + DECLARE_PER_CPU_SECTION(type, name, "") + +#define DEFINE_PER_CPU(type, name) \ + DEFINE_PER_CPU_SECTION(type, name, "") + +/* + * Declaration/definition used for per-CPU variables that must come first in + * the set of variables. + */ +#define DECLARE_PER_CPU_FIRST(type, name) \ + DECLARE_PER_CPU_SECTION(type, name, PER_CPU_FIRST_SECTION) + +#define DEFINE_PER_CPU_FIRST(type, name) \ + DEFINE_PER_CPU_SECTION(type, name, PER_CPU_FIRST_SECTION) + +/* + * Declaration/definition used for per-CPU variables that must be cacheline + * aligned under SMP conditions so that, whilst a particular instance of the + * data corresponds to a particular CPU, inefficiencies due to direct access by + * other CPUs are reduced by preventing the data from unnecessarily spanning + * cachelines. + * + * An example of this would be statistical data, where each CPU's set of data + * is updated by that CPU alone, but the data from across all CPUs is collated + * by a CPU processing a read from a proc file. + */ +#define DECLARE_PER_CPU_SHARED_ALIGNED(type, name) \ + DECLARE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \ + ____cacheline_aligned_in_smp + +#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name) \ + DEFINE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \ + ____cacheline_aligned_in_smp + +/* + * Declaration/definition used for per-CPU variables that must be page aligned. + */ +#define DECLARE_PER_CPU_PAGE_ALIGNED(type, name) \ + DECLARE_PER_CPU_SECTION(type, name, ".page_aligned") + +#define DEFINE_PER_CPU_PAGE_ALIGNED(type, name) \ + DEFINE_PER_CPU_SECTION(type, name, ".page_aligned") + +/* + * Intermodule exports for per-CPU variables. + */ +#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var) +#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var) + + +#endif /* _LINUX_PERCPU_DEFS_H */ diff --git a/include/linux/percpu.h b/include/linux/percpu.h index f052d8184993..1581ff235c7e 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -9,26 +9,6 @@ #include -#define DEFINE_PER_CPU_SECTION(type, name, section) \ - __attribute__((__section__(PER_CPU_BASE_SECTION section))) \ - PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name - -#define DEFINE_PER_CPU(type, name) \ - DEFINE_PER_CPU_SECTION(type, name, "") - -#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name) \ - DEFINE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \ - ____cacheline_aligned_in_smp - -#define DEFINE_PER_CPU_PAGE_ALIGNED(type, name) \ - DEFINE_PER_CPU_SECTION(type, name, ".page_aligned") - -#define DEFINE_PER_CPU_FIRST(type, name) \ - DEFINE_PER_CPU_SECTION(type, name, PER_CPU_FIRST_SECTION) - -#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var) -#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var) - /* enough to cover all DEFINE_PER_CPUs in modules */ #ifdef CONFIG_MODULES #define PERCPU_MODULE_RESERVE (8 << 10) -- cgit v1.2.3 From 5dd559f020c98a2a4b3e063f09c0e4bc771ed838 Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Tue, 21 Apr 2009 16:30:32 -0600 Subject: Trivial: fix a typo in slow-work.h Fix a comment typo in slow-work.h ...a trivial mistake, but it will mess up kerneldoc if nothing else. Signed-off-by: Jonathan Corbet Signed-off-by: Linus Torvalds --- include/linux/slow-work.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/slow-work.h b/include/linux/slow-work.h index 85958277f83d..b65c8881f07a 100644 --- a/include/linux/slow-work.h +++ b/include/linux/slow-work.h @@ -67,7 +67,7 @@ static inline void slow_work_init(struct slow_work *work, } /** - * slow_work_init - Initialise a very slow work item + * vslow_work_init - Initialise a very slow work item * @work: The work item to initialise * @ops: The operations to use to handle the slow work item * -- cgit v1.2.3 From d4d5291c8cd499b1b590336059d5cc3e24c1ced6 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Tue, 21 Apr 2009 13:32:54 -0700 Subject: driver synchronization: make scsi_wait_scan more advanced There is currently only one way for userspace to say "wait for my storage device to get ready for the modules I just loaded": to load the scsi_wait_scan module. Expectations of userspace are that once this module is loaded, all the (storage) devices for which the drivers were loaded before the module load are present. Now, there are some issues with the implementation, and the async stuff got caught in the middle of this: The existing code only waits for the scsy async probing to finish, but it did not take into account at all that probing might not have begun yet. (Russell ran into this problem on his computer and the fix works for him) This patch fixes this more thoroughly than the previous "fix", which had some bad side effects (namely, for kernel code that wanted to wait for the scsi scan it would also do an async sync, which would deadlock if you did it from async context already.. there's a report about that on lkml): The patch makes the module first wait for all device driver probes, and then it will wait for the scsi parallel scan to finish. Signed-off-by: Arjan van de Ven Tested-by: Russell King Signed-off-by: Linus Torvalds --- include/linux/device.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/device.h b/include/linux/device.h index 2918c0e8fdfd..6a69caaac18a 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -551,6 +551,7 @@ extern int (*platform_notify_remove)(struct device *dev); extern struct device *get_device(struct device *dev); extern void put_device(struct device *dev); +extern void wait_for_device_probe(void); /* drivers/base/power/shutdown.c */ extern void device_shutdown(void); -- cgit v1.2.3