From af8a41271b56f6d79cb4d7c7f3ca688a2d97a801 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 15 Apr 2016 16:59:38 +0200 Subject: iio:adis: Add support for manual self-test flag clear Some variants of the devices from the ADIS family don't auto-clear the self-test bit after the self-test has completed. Instead we have to manually clear. Add support for this to the ADIS library. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- include/linux/iio/imu/adis.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/iio/imu/adis.h b/include/linux/iio/imu/adis.h index fa2d01ef8f55..360da7d18a3d 100644 --- a/include/linux/iio/imu/adis.h +++ b/include/linux/iio/imu/adis.h @@ -41,6 +41,7 @@ struct adis_data { unsigned int diag_stat_reg; unsigned int self_test_mask; + bool self_test_no_autoclear; unsigned int startup_delay; const char * const *status_error_msgs; -- cgit v1.2.3 From 97865fe41322d83dac4373fe0a0de5b1a1b318c5 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 24 Mar 2016 14:18:05 +0100 Subject: iio: st_sensors: verify interrupt event to status This makes all ST sensor drivers check that they actually have new data available for the requested channel(s) before claiming an IRQ, by reading the status register (which is conveniently the same for all ST sensors) and check that the channel has new data before proceeding to read it and fill the buffer. This way sensors can share an interrupt line: it can be flaged as shared and then the sensor that did not fire will return NO_IRQ, and the sensor that fired will handle the IRQ and return IRQ_HANDLED. Cc: Giuseppe Barba Cc: Denis Ciocca Signed-off-by: Linus Walleij Signed-off-by: Jonathan Cameron --- include/linux/iio/common/st_sensors.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h index 6670c3d25c58..d8da075bfda0 100644 --- a/include/linux/iio/common/st_sensors.h +++ b/include/linux/iio/common/st_sensors.h @@ -37,6 +37,7 @@ #define ST_SENSORS_DEFAULT_AXIS_ADDR 0x20 #define ST_SENSORS_DEFAULT_AXIS_MASK 0x07 #define ST_SENSORS_DEFAULT_AXIS_N_BIT 3 +#define ST_SENSORS_DEFAULT_STAT_ADDR 0x27 #define ST_SENSORS_MAX_NAME 17 #define ST_SENSORS_MAX_4WAI 7 @@ -121,6 +122,7 @@ struct st_sensor_bdu { * @mask_int2: mask to enable/disable IRQ on INT2 pin. * @addr_ihl: address to enable/disable active low on the INT lines. * @mask_ihl: mask to enable/disable active low on the INT lines. + * @addr_stat_drdy: address to read status of DRDY (data ready) interrupt * struct ig1 - represents the Interrupt Generator 1 of sensors. * @en_addr: address of the enable ig1 register. * @en_mask: mask to write the on/off value for enable. @@ -131,6 +133,7 @@ struct st_sensor_data_ready_irq { u8 mask_int2; u8 addr_ihl; u8 mask_ihl; + u8 addr_stat_drdy; struct { u8 en_addr; u8 en_mask; -- cgit v1.2.3 From 0e6f6871a1591f4bb0971809c45bc91a991f1967 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 14 Apr 2016 10:45:21 +0200 Subject: iio: st_sensors: support open drain mode Some types of ST Sensors can be connected to the same IRQ line as other peripherals using open drain. Add a device tree binding and a sensor data property to flip the right bit in the interrupt control register to enable open drain mode on the INT line. If the line is set to be open drain, also tag on IRQF_SHARED to the IRQ flags when requesting the interrupt, as the whole point of using open drain interrupt lines is to share them with more than one peripheral (wire-or). Cc: devicetree@vger.kernel.org Cc: Giuseppe Barba Cc: Denis Ciocca Acked-by: Rob Herring Signed-off-by: Linus Walleij Signed-off-by: Jonathan Cameron --- include/linux/iio/common/st_sensors.h | 6 ++++++ include/linux/platform_data/st_sensors_pdata.h | 2 ++ 2 files changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h index d8da075bfda0..d029ffac0d69 100644 --- a/include/linux/iio/common/st_sensors.h +++ b/include/linux/iio/common/st_sensors.h @@ -122,6 +122,8 @@ struct st_sensor_bdu { * @mask_int2: mask to enable/disable IRQ on INT2 pin. * @addr_ihl: address to enable/disable active low on the INT lines. * @mask_ihl: mask to enable/disable active low on the INT lines. + * @addr_od: address to enable/disable Open Drain on the INT lines. + * @mask_od: mask to enable/disable Open Drain on the INT lines. * @addr_stat_drdy: address to read status of DRDY (data ready) interrupt * struct ig1 - represents the Interrupt Generator 1 of sensors. * @en_addr: address of the enable ig1 register. @@ -133,6 +135,8 @@ struct st_sensor_data_ready_irq { u8 mask_int2; u8 addr_ihl; u8 mask_ihl; + u8 addr_od; + u8 mask_od; u8 addr_stat_drdy; struct { u8 en_addr; @@ -215,6 +219,7 @@ struct st_sensor_settings { * @odr: Output data rate of the sensor [Hz]. * num_data_channels: Number of data channels used in buffer. * @drdy_int_pin: Redirect DRDY on pin 1 (1) or pin 2 (2). + * @int_pin_open_drain: Set the interrupt/DRDY to open drain. * @get_irq_data_ready: Function to get the IRQ used for data ready signal. * @tf: Transfer function structure used by I/O operations. * @tb: Transfer buffers and mutex used by I/O operations. @@ -236,6 +241,7 @@ struct st_sensor_data { unsigned int num_data_channels; u8 drdy_int_pin; + bool int_pin_open_drain; unsigned int (*get_irq_data_ready) (struct iio_dev *indio_dev); diff --git a/include/linux/platform_data/st_sensors_pdata.h b/include/linux/platform_data/st_sensors_pdata.h index 753839187ba0..79b0e4cdb814 100644 --- a/include/linux/platform_data/st_sensors_pdata.h +++ b/include/linux/platform_data/st_sensors_pdata.h @@ -16,9 +16,11 @@ * @drdy_int_pin: Redirect DRDY on pin 1 (1) or pin 2 (2). * Available only for accelerometer and pressure sensors. * Accelerometer DRDY on LSM330 available only on pin 1 (see datasheet). + * @open_drain: set the interrupt line to be open drain if possible. */ struct st_sensors_platform_data { u8 drdy_int_pin; + bool open_drain; }; #endif /* ST_SENSORS_PDATA_H */ -- cgit v1.2.3 From 8bf872d8d261feefcdf67027522e3f717cad2bfe Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Wed, 6 Apr 2016 16:01:06 +0530 Subject: iio: core: Add devm_ APIs for iio_channel_{get,release} Some of kernel driver uses the IIO framework to get the sensor value via ADC or IIO HW driver. The client driver get iio channel by iio_channel_get() and release it by calling iio_channel_release(). Add resource managed version (devm_*) of these APIs so that if client calls the devm_iio_channel_get() then it need not to release it explicitly, it can be done by managed device framework when driver get un-binded. This reduces the code in error path and also need of .remove callback in some cases. Signed-off-by: Laxman Dewangan Signed-off-by: Jonathan Cameron --- include/linux/iio/consumer.h | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'include/linux') diff --git a/include/linux/iio/consumer.h b/include/linux/iio/consumer.h index fad58671c49e..e1e033d6a81f 100644 --- a/include/linux/iio/consumer.h +++ b/include/linux/iio/consumer.h @@ -48,6 +48,33 @@ struct iio_channel *iio_channel_get(struct device *dev, */ void iio_channel_release(struct iio_channel *chan); +/** + * devm_iio_channel_get() - Resource managed version of iio_channel_get(). + * @dev: Pointer to consumer device. Device name must match + * the name of the device as provided in the iio_map + * with which the desired provider to consumer mapping + * was registered. + * @consumer_channel: Unique name to identify the channel on the consumer + * side. This typically describes the channels use within + * the consumer. E.g. 'battery_voltage' + * + * Returns a pointer to negative errno if it is not able to get the iio channel + * otherwise returns valid pointer for iio channel. + * + * The allocated iio channel is automatically released when the device is + * unbound. + */ +struct iio_channel *devm_iio_channel_get(struct device *dev, + const char *consumer_channel); +/** + * devm_iio_channel_release() - Resource managed version of + * iio_channel_release(). + * @dev: Pointer to consumer device for which resource + * is allocared. + * @chan: The channel to be released. + */ +void devm_iio_channel_release(struct device *dev, struct iio_channel *chan); + /** * iio_channel_get_all() - get all channels associated with a client * @dev: Pointer to consumer device. -- cgit v1.2.3 From efc2c0133f198bc65593a67015af358919b0c48f Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Wed, 6 Apr 2016 16:01:07 +0530 Subject: iio: core: Add devm_ APIs for iio_channel_{get,release}_all Some of kernel driver uses the IIO framework to get the sensor value via ADC or IIO HW driver. The client driver get iio channel by iio_channel_get_all() and release it by calling iio_channel_release_all(). Add resource managed version (devm_*) of these APIs so that if client calls the devm_iio_channel_get_all() then it need not to release it explicitly, it can be done by managed device framework when driver get un-binded. This reduces the code in error path and also need of .remove callback in some cases. Signed-off-by: Laxman Dewangan Signed-off-by: Jonathan Cameron --- include/linux/iio/consumer.h | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'include/linux') diff --git a/include/linux/iio/consumer.h b/include/linux/iio/consumer.h index e1e033d6a81f..3d672f72e7ec 100644 --- a/include/linux/iio/consumer.h +++ b/include/linux/iio/consumer.h @@ -92,6 +92,32 @@ struct iio_channel *iio_channel_get_all(struct device *dev); */ void iio_channel_release_all(struct iio_channel *chan); +/** + * devm_iio_channel_get_all() - Resource managed version of + * iio_channel_get_all(). + * @dev: Pointer to consumer device. + * + * Returns a pointer to negative errno if it is not able to get the iio channel + * otherwise returns an array of iio_channel structures terminated with one with + * null iio_dev pointer. + * + * This function is used by fairly generic consumers to get all the + * channels registered as having this consumer. + * + * The allocated iio channels are automatically released when the device is + * unbounded. + */ +struct iio_channel *devm_iio_channel_get_all(struct device *dev); + +/** + * devm_iio_channel_release_all() - Resource managed version of + * iio_channel_release_all(). + * @dev: Pointer to consumer device for which resource + * is allocared. + * @chan: Array channel to be released. + */ +void devm_iio_channel_release_all(struct device *dev, struct iio_channel *chan); + struct iio_cb_buffer; /** * iio_channel_get_all_cb() - register callback for triggered capture -- cgit v1.2.3 From dfc57732ad38f93ae6232a3b4e64fd077383a0f1 Mon Sep 17 00:00:00 2001 From: Gregor Boirie Date: Wed, 20 Apr 2016 19:23:43 +0200 Subject: iio:core: mounting matrix support Expose a rotation matrix to indicate userspace the chip placement with respect to the overall hardware system. This is needed to adjust coordinates sampled from a sensor chip when its position deviates from the main hardware system. Final coordinates computation is delegated to userspace since: * computation may involve floating point arithmetics ; * it allows an application to combine adjustments with arbitrary transformations. This 3 dimentional space rotation matrix is expressed as 3x3 array of strings to support floating point numbers. It may be retrieved from a "[_][_]mount_matrix" sysfs attribute file. It is declared into a device / driver specific DTS property or platform data. Signed-off-by: Gregor Boirie Signed-off-by: Jonathan Cameron --- include/linux/iio/iio.h | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) (limited to 'include/linux') diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index 0b2773ada0ba..7c29cb0124ae 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -147,6 +147,37 @@ ssize_t iio_enum_write(struct iio_dev *indio_dev, .private = (uintptr_t)(_e), \ } +/** + * struct iio_mount_matrix - iio mounting matrix + * @rotation: 3 dimensional space rotation matrix defining sensor alignment with + * main hardware + */ +struct iio_mount_matrix { + const char *rotation[9]; +}; + +ssize_t iio_show_mount_matrix(struct iio_dev *indio_dev, uintptr_t priv, + const struct iio_chan_spec *chan, char *buf); +int of_iio_read_mount_matrix(const struct device *dev, const char *propname, + struct iio_mount_matrix *matrix); + +typedef const struct iio_mount_matrix * + (iio_get_mount_matrix_t)(const struct iio_dev *indio_dev, + const struct iio_chan_spec *chan); + +/** + * IIO_MOUNT_MATRIX() - Initialize mount matrix extended channel attribute + * @_shared: Whether the attribute is shared between all channels + * @_get: Pointer to an iio_get_mount_matrix_t accessor + */ +#define IIO_MOUNT_MATRIX(_shared, _get) \ +{ \ + .name = "mount_matrix", \ + .shared = (_shared), \ + .read = iio_show_mount_matrix, \ + .private = (uintptr_t)(_get), \ +} + /** * struct iio_event_spec - specification for a channel event * @type: Type of the event -- cgit v1.2.3 From 97eacb9166f4810368e180073dcbceeff0de34df Mon Sep 17 00:00:00 2001 From: Gregor Boirie Date: Wed, 20 Apr 2016 19:23:44 +0200 Subject: iio:ak8975: add mounting matrix support Expose a rotation matrix to indicate userspace the chip orientation with respect to the overall hardware system. Matrix is retrieved from "in_mount_matrix". It is declared into ak8975 DTS entry as a "mount-matrix" property. Signed-off-by: Gregor Boirie Acked-by: Rob Herring Signed-off-by: Jonathan Cameron --- include/linux/iio/magnetometer/ak8975.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) create mode 100644 include/linux/iio/magnetometer/ak8975.h (limited to 'include/linux') diff --git a/include/linux/iio/magnetometer/ak8975.h b/include/linux/iio/magnetometer/ak8975.h new file mode 100644 index 000000000000..c8400959d197 --- /dev/null +++ b/include/linux/iio/magnetometer/ak8975.h @@ -0,0 +1,16 @@ +#ifndef __IIO_MAGNETOMETER_AK8975_H__ +#define __IIO_MAGNETOMETER_AK8975_H__ + +#include + +/** + * struct ak8975_platform_data - AK8975 magnetometer driver platform data + * @eoc_gpio: data ready event gpio + * @orientation: mounting matrix relative to main hardware + */ +struct ak8975_platform_data { + int eoc_gpio; + struct iio_mount_matrix orientation; +}; + +#endif -- cgit v1.2.3 From eb3798463f71afc77abd25b2f62708be06f7173b Mon Sep 17 00:00:00 2001 From: Gregor Boirie Date: Wed, 20 Apr 2016 19:23:45 +0200 Subject: iio:imu:mpu6050: enhance mounting matrix support Add a new rotation matrix sysfs attribute compliant with IIO core mounting matrix API. Matrix is retrieved from "in_anglvel_mount_matrix" and "in_accel_mount_matrix" sysfs attributes. It is declared into mpu6050 DTS entry as a "mount-matrix" property. Old interface is kept for backward userspace compatibility and may be retrieved from legacy platform_data mechanism only. Signed-off-by: Gregor Boirie Acked-by: Rob Herring Signed-off-by: Jonathan Cameron --- include/linux/platform_data/invensense_mpu6050.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/platform_data/invensense_mpu6050.h b/include/linux/platform_data/invensense_mpu6050.h index ad3aa7b95f35..554b59801aa8 100644 --- a/include/linux/platform_data/invensense_mpu6050.h +++ b/include/linux/platform_data/invensense_mpu6050.h @@ -16,13 +16,16 @@ /** * struct inv_mpu6050_platform_data - Platform data for the mpu driver - * @orientation: Orientation matrix of the chip + * @orientation: Orientation matrix of the chip (deprecated in favor of + * mounting matrix retrieved from device-tree) * * Contains platform specific information on how to configure the MPU6050 to * work on this platform. The orientation matricies are 3x3 rotation matricies * that are applied to the data to rotate from the mounting orientation to the * platform orientation. The values must be one of 0, 1, or -1 and each row and * column should have exactly 1 non-zero value. + * + * Deprecated in favor of mounting matrix retrieved from device-tree. */ struct inv_mpu6050_platform_data { __s8 orientation[9]; -- cgit v1.2.3