From 3310225dfc71a35a2cc9340c15c0e08b14b3c754 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Mon, 9 Jan 2012 11:53:50 -0600 Subject: lib: proportion: lower PROP_MAX_SHIFT to 32 on 64-bit kernel PROP_MAX_SHIFT should be set to <=32 on 64-bit box. This fixes two bugs in the below lines of bdi_dirty_limit(): bdi_dirty *= numerator; do_div(bdi_dirty, denominator); 1) divide error: do_div() only uses the lower 32 bit of the denominator, which may trimmed to be 0 when PROP_MAX_SHIFT > 32. 2) overflow: (bdi_dirty * numerator) could easily overflow if numerator used up to 48 bits, leaving only 16 bits to bdi_dirty Cc: Cc: Peter Zijlstra Reported-by: Ilya Tumaykin Tested-by: Ilya Tumaykin Signed-off-by: Wu Fengguang --- include/linux/proportions.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/proportions.h b/include/linux/proportions.h index ef35bb73f69b..26a8a4ed9b07 100644 --- a/include/linux/proportions.h +++ b/include/linux/proportions.h @@ -81,7 +81,11 @@ void prop_inc_percpu(struct prop_descriptor *pd, struct prop_local_percpu *pl) * Limit the time part in order to ensure there are some bits left for the * cycle counter and fraction multiply. */ +#if BITS_PER_LONG == 32 #define PROP_MAX_SHIFT (3*BITS_PER_LONG/4) +#else +#define PROP_MAX_SHIFT (BITS_PER_LONG/2) +#endif #define PROP_FRAC_SHIFT (BITS_PER_LONG - PROP_MAX_SHIFT - 1) #define PROP_FRAC_BASE (1UL << PROP_FRAC_SHIFT) -- cgit v1.2.3 From 504b61630ab65296b6c9113cce834574e8cc01de Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 31 Jan 2012 16:43:50 -0800 Subject: usb: ch9.h: usb_endpoint_maxp() uses __le16_to_cpu() The usb/ch9.h will be installed to /usr/include/linux, and be used from user space. But le16_to_cpu() is only defined for kernel code. Without this patch, user space compile will be broken. Special thanks to Stefan Becker Reported-by: Stefan Becker Signed-off-by: Kuninori Morimoto Cc: stable Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/ch9.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index 61b29057b054..3b6f628880f8 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -589,7 +589,7 @@ static inline int usb_endpoint_is_isoc_out( */ static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd) { - return le16_to_cpu(epd->wMaxPacketSize); + return __le16_to_cpu(epd->wMaxPacketSize); } /*-------------------------------------------------------------------------*/ -- cgit v1.2.3 From c31c151b1c4a29da4dc92212aa8648fb4f8557b9 Mon Sep 17 00:00:00 2001 From: Haiyang Zhang Date: Thu, 2 Feb 2012 07:18:00 +0000 Subject: net/hyperv: Fix the page buffer when an RNDIS message goes beyond page boundary There is a possible data corruption if an RNDIS message goes beyond page boundary in the sending code path. This patch fixes the problem. Signed-off-by: Haiyang Zhang Signed-off-by: K. Y. Srinivasan Signed-off-by: David S. Miller --- include/linux/hyperv.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index 62b908e0e591..0ae065a5fcb2 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -35,7 +35,7 @@ #include -#define MAX_PAGE_BUFFER_COUNT 18 +#define MAX_PAGE_BUFFER_COUNT 19 #define MAX_MULTIPAGE_BUFFER_COUNT 32 /* 128K */ #pragma pack(push, 1) -- cgit v1.2.3 From 331818f1c468a24e581aedcbe52af799366a9dfe Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Fri, 3 Feb 2012 18:30:53 -0500 Subject: NFSv4: Fix an Oops in the NFSv4 getacl code Commit bf118a342f10dafe44b14451a1392c3254629a1f (NFSv4: include bitmap in nfsv4 get acl data) introduces the 'acl_scratch' page for the case where we may need to decode multi-page data. However it fails to take into account the fact that the variable may be NULL (for the case where we're not doing multi-page decode), and it also attaches it to the encoding xdr_stream rather than the decoding one. The immediate result is an Oops in nfs4_xdr_enc_getacl due to the call to page_address() with a NULL page pointer. Signed-off-by: Trond Myklebust Cc: Andy Adamson Cc: stable@vger.kernel.org --- include/linux/nfs_xdr.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index a764cef06b73..d6ba9a12591e 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -614,7 +614,6 @@ struct nfs_getaclargs { size_t acl_len; unsigned int acl_pgbase; struct page ** acl_pages; - struct page * acl_scratch; struct nfs4_sequence_args seq_args; }; @@ -624,6 +623,7 @@ struct nfs_getaclres { size_t acl_len; size_t acl_data_offset; int acl_flags; + struct page * acl_scratch; struct nfs4_sequence_res seq_res; }; -- cgit v1.2.3 From 17711dbf4788ded84470941ff63a7029f73ca654 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sun, 16 Oct 2011 16:54:51 -0700 Subject: ARM: tegra: emc: convert tegra2_emc to a platform driver This is the first step in making it device-tree aware and get rid of the in-kernel EMC tables (of which there are none in mainline, thankfully). Changes since v3: * moved to devm_request_and_ioremap() in probe() Changes since v2: * D'oh -- missed a couple of variables that were added, never used and then later removed in a later patch. Changes since v1: * Fixed messed up indentation * Removed code that should be gone (was added here and removed later in series) Signed-off-by: Olof Johansson Acked-by: Stephen Warren --- include/linux/platform_data/tegra_emc.h | 34 +++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) create mode 100644 include/linux/platform_data/tegra_emc.h (limited to 'include/linux') diff --git a/include/linux/platform_data/tegra_emc.h b/include/linux/platform_data/tegra_emc.h new file mode 100644 index 000000000000..df67505e98f8 --- /dev/null +++ b/include/linux/platform_data/tegra_emc.h @@ -0,0 +1,34 @@ +/* + * Copyright (C) 2011 Google, Inc. + * + * Author: + * Colin Cross + * Olof Johansson + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __TEGRA_EMC_H_ +#define __TEGRA_EMC_H_ + +#define TEGRA_EMC_NUM_REGS 46 + +struct tegra_emc_table { + unsigned long rate; + u32 regs[TEGRA_EMC_NUM_REGS]; +}; + +struct tegra_emc_pdata { + int num_tables; + struct tegra_emc_table *tables; +}; + +#endif -- cgit v1.2.3 From 11a3122f6cf2d988a77eb8883d0fc49cd013a6d5 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 7 Feb 2012 07:51:30 +0100 Subject: block: strip out locking optimization in put_io_context() put_io_context() performed a complex trylock dancing to avoid deferring ioc release to workqueue. It was also broken on UP because trylock was always assumed to succeed which resulted in unbalanced preemption count. While there are ways to fix the UP breakage, even the most pathological microbench (forced ioc allocation and tight fork/exit loop) fails to show any appreciable performance benefit of the optimization. Strip it out. If there turns out to be workloads which are affected by this change, simpler optimization from the discussion thread can be applied later. Signed-off-by: Tejun Heo LKML-Reference: <1328514611.21268.66.camel@sli10-conroe> Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 3 --- include/linux/iocontext.h | 5 ++--- 2 files changed, 2 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 6c6a1f008065..606cf339bb56 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -399,9 +399,6 @@ struct request_queue { /* Throttle data */ struct throtl_data *td; #endif -#ifdef CONFIG_LOCKDEP - int ioc_release_depth; -#endif }; #define QUEUE_FLAG_QUEUED 1 /* uses generic tag queueing */ diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h index 7e1371c4bccf..119773eebe31 100644 --- a/include/linux/iocontext.h +++ b/include/linux/iocontext.h @@ -133,7 +133,7 @@ static inline struct io_context *ioc_task_link(struct io_context *ioc) struct task_struct; #ifdef CONFIG_BLOCK -void put_io_context(struct io_context *ioc, struct request_queue *locked_q); +void put_io_context(struct io_context *ioc); void exit_io_context(struct task_struct *task); struct io_context *get_task_io_context(struct task_struct *task, gfp_t gfp_flags, int node); @@ -141,8 +141,7 @@ void ioc_ioprio_changed(struct io_context *ioc, int ioprio); void ioc_cgroup_changed(struct io_context *ioc); #else struct io_context; -static inline void put_io_context(struct io_context *ioc, - struct request_queue *locked_q) { } +static inline void put_io_context(struct io_context *ioc) { } static inline void exit_io_context(struct task_struct *task) { } #endif -- cgit v1.2.3 From 050c8ea80e3e90019d9e981c6a117ef614e882ed Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 8 Feb 2012 09:19:38 +0100 Subject: block: separate out blk_rq_merge_ok() and blk_try_merge() from elevator functions blk_rq_merge_ok() is the elevator-neutral part of merge eligibility test. blk_try_merge() determines merge direction and expects the caller to have tested elv_rq_merge_ok() previously. elv_rq_merge_ok() now wraps blk_rq_merge_ok() and then calls elv_iosched_allow_merge(). elv_try_merge() is removed and the two callers are updated to call elv_rq_merge_ok() explicitly followed by blk_try_merge(). While at it, make rq_merge_ok() functions return bool. This is to prepare for plug merge update and doesn't introduce any behavior change. This is based on Jens' patch to skip elevator_allow_merge_fn() from plug merge. Signed-off-by: Tejun Heo LKML-Reference: <4F16F3CA.90904@kernel.dk> Original-patch-by: Jens Axboe Signed-off-by: Jens Axboe --- include/linux/elevator.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/elevator.h b/include/linux/elevator.h index c24f3d7fbf1e..d6dfb65c8885 100644 --- a/include/linux/elevator.h +++ b/include/linux/elevator.h @@ -122,7 +122,6 @@ extern void elv_dispatch_add_tail(struct request_queue *, struct request *); extern void elv_add_request(struct request_queue *, struct request *, int); extern void __elv_add_request(struct request_queue *, struct request *, int); extern int elv_merge(struct request_queue *, struct request **, struct bio *); -extern int elv_try_merge(struct request *, struct bio *); extern void elv_merge_requests(struct request_queue *, struct request *, struct request *); extern void elv_merged_request(struct request_queue *, struct request *, int); @@ -155,7 +154,7 @@ extern ssize_t elv_iosched_store(struct request_queue *, const char *, size_t); extern int elevator_init(struct request_queue *, char *); extern void elevator_exit(struct elevator_queue *); extern int elevator_change(struct request_queue *, const char *); -extern int elv_rq_merge_ok(struct request *, struct bio *); +extern bool elv_rq_merge_ok(struct request *, struct bio *); /* * Helper functions. -- cgit v1.2.3 From 07c2bd37350c9b1af71b35d05f16e300a6602948 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 8 Feb 2012 09:19:42 +0100 Subject: block: don't call elevator callbacks for plug merges Plug merge calls two elevator callbacks outside queue lock - elevator_allow_merge_fn() and elevator_bio_merged_fn(). Although attempt_plug_merge() suggests that elevator is guaranteed to be there through the existing request on the plug list, nothing prevents plug merge from calling into dying or initializing elevator. For regular merges, bypass ensures elvpriv count to reach zero, which in turn prevents merges as all !ELVPRIV requests get REQ_SOFTBARRIER from forced back insertion. Plug merge doesn't check ELVPRIV, and, as the requests haven't gone through elevator insertion yet, it doesn't have SOFTBARRIER set allowing merges on a bypassed queue. This, for example, leads to the following crash during elevator switch. BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [] cfq_allow_merge+0x49/0xa0 PGD 112cbc067 PUD 115d5c067 PMD 0 Oops: 0000 [#1] PREEMPT SMP CPU 1 Modules linked in: deadline_iosched Pid: 819, comm: dd Not tainted 3.3.0-rc2-work+ #76 Bochs Bochs RIP: 0010:[] [] cfq_allow_merge+0x49/0xa0 RSP: 0018:ffff8801143a38f8 EFLAGS: 00010297 RAX: 0000000000000000 RBX: ffff88011817ce28 RCX: ffff880116eb6cc0 RDX: 0000000000000000 RSI: ffff880118056e20 RDI: ffff8801199512f8 RBP: ffff8801143a3908 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: ffff880118195708 R13: ffff880118052aa0 R14: ffff8801143a3d50 R15: ffff880118195708 FS: 00007f19f82cb700(0000) GS:ffff88011fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000008 CR3: 0000000112c6a000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process dd (pid: 819, threadinfo ffff8801143a2000, task ffff880116eb6cc0) Stack: ffff88011817ce28 ffff880118195708 ffff8801143a3928 ffffffff81391bba ffff88011817ce28 ffff880118195708 ffff8801143a3948 ffffffff81391bf1 ffff88011817ce28 0000000000000000 ffff8801143a39a8 ffffffff81398e3e Call Trace: [] elv_rq_merge_ok+0x4a/0x60 [] elv_try_merge+0x21/0x40 [] blk_queue_bio+0x8e/0x390 [] generic_make_request+0xca/0x100 [] submit_bio+0x74/0x100 [] __blockdev_direct_IO+0x1ce2/0x3450 [] blkdev_direct_IO+0x57/0x60 [] generic_file_aio_read+0x6d5/0x760 [] do_sync_read+0xe2/0x120 [] vfs_read+0xc5/0x180 [] sys_read+0x51/0x90 [] system_call_fastpath+0x16/0x1b There are multiple ways to fix this including making plug merge check ELVPRIV; however, * Calling into elevator outside queue lock is confusing and error-prone. * Requests on plug list aren't known to the elevator. They aren't on the elevator yet, so there's no elevator specific state to update. * Given the nature of plug merges - collecting bio's for the same purpose from the same issuer - elevator specific restrictions aren't applicable. So, simply don't call into elevator methods from plug merge by moving elv_bio_merged() from bio_attempt_*_merge() to blk_queue_bio(), and using blk_try_merge() in attempt_plug_merge(). This is based on Jens' patch to skip elevator_allow_merge_fn() from plug merge. Note that this makes per-cgroup merged stats skip plug merging. Signed-off-by: Tejun Heo LKML-Reference: <4F16F3CA.90904@kernel.dk> Original-patch-by: Jens Axboe Signed-off-by: Jens Axboe --- include/linux/elevator.h | 6 ------ 1 file changed, 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/elevator.h b/include/linux/elevator.h index d6dfb65c8885..7d4e0356f329 100644 --- a/include/linux/elevator.h +++ b/include/linux/elevator.h @@ -42,12 +42,6 @@ struct elevator_ops elevator_merged_fn *elevator_merged_fn; elevator_merge_req_fn *elevator_merge_req_fn; elevator_allow_merge_fn *elevator_allow_merge_fn; - - /* - * Used for both plugged list and elevator merging and in the - * former case called without queue_lock. Read comment on top of - * attempt_plug_merge() for details. - */ elevator_bio_merged_fn *elevator_bio_merged_fn; elevator_dispatch_fn *elevator_dispatch_fn; -- cgit v1.2.3 From cdccaa9467b982d57b139818d15e1e994feca372 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Wed, 8 Feb 2012 20:03:14 +0100 Subject: cdrom: move shared static to cdrom_device_info The keeplocked variable in the cdrom driver is shared across multiple drives, but set in per-device ioctls. Move it to the per-device struct, avoiding that the setting on one drive affects the driver's behavior when closing another. [ Impact: limit udev's confusion to one drive when a CD burning program unlocks the CD door at the end of burning. ] Signed-off-by: Paolo Bonzini Signed-off-by: Jens Axboe --- include/linux/cdrom.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/cdrom.h b/include/linux/cdrom.h index 35eae4b67503..7c48029dffe6 100644 --- a/include/linux/cdrom.h +++ b/include/linux/cdrom.h @@ -952,7 +952,8 @@ struct cdrom_device_info { char name[20]; /* name of the device type */ /* per-device flags */ __u8 sanyo_slot : 2; /* Sanyo 3 CD changer support */ - __u8 reserved : 6; /* not used yet */ + __u8 keeplocked : 1; /* CDROM_LOCKDOOR status */ + __u8 reserved : 5; /* not used yet */ int cdda_method; /* see flags */ __u8 last_sense; __u8 media_written; /* dirty flag, DVD+RW bookkeeping */ -- cgit v1.2.3 From d9f5343e35d9138432657202afa8e3ddb2ade360 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Thu, 5 Jan 2012 16:28:54 -0800 Subject: USB: Remove duplicate USB 3.0 hub feature #defines. Somehow we ended up with duplicate hub feature #defines in ch11.h. Tatyana Brokhman first created the USB 3.0 hub feature macros in 2.6.38 with commit 0eadcc09203349b11ca477ec367079b23d32ab91 "usb: USB3.0 ch11 definitions". In 2.6.39, I modified a patch from John Youn that added similar macros in a different place in the same file, and committed dbe79bbe9dcb22cb3651c46f18943477141ca452 "USB 3.0 Hub Changes". Some of the #defines used different names for the same values. Others used exactly the same names with the same values, like these gems: #define USB_PORT_FEAT_BH_PORT_RESET 28 ... #define USB_PORT_FEAT_BH_PORT_RESET 28 According to my very geeky husband (who looked it up in the C99 spec), it is allowed to have object-like macros with duplicate names as long as the replacement list is exactly the same. However, he recalled that some compilers will give warnings when they find duplicate macros. It's probably best to remove the duplicates in the stable tree, so that the code compiles for everyone. The macros are now fixed to move the feature requests that are specific to USB 3.0 hubs into a new section (out of the USB 2.0 hub feature section), and use the most common macro name. This patch should be backported to 2.6.39. Signed-off-by: Sarah Sharp Cc: Tatyana Brokhman Cc: John Youn Cc: Jamey Sharp Cc: stable@vger.kernel.org --- include/linux/usb/ch11.h | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb/ch11.h b/include/linux/usb/ch11.h index 31fdb4c6ee3d..0b83acd3360a 100644 --- a/include/linux/usb/ch11.h +++ b/include/linux/usb/ch11.h @@ -61,12 +61,6 @@ #define USB_PORT_FEAT_TEST 21 #define USB_PORT_FEAT_INDICATOR 22 #define USB_PORT_FEAT_C_PORT_L1 23 -#define USB_PORT_FEAT_C_PORT_LINK_STATE 25 -#define USB_PORT_FEAT_C_PORT_CONFIG_ERROR 26 -#define USB_PORT_FEAT_PORT_REMOTE_WAKE_MASK 27 -#define USB_PORT_FEAT_BH_PORT_RESET 28 -#define USB_PORT_FEAT_C_BH_PORT_RESET 29 -#define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT 30 /* * Port feature selectors added by USB 3.0 spec. @@ -75,8 +69,8 @@ #define USB_PORT_FEAT_LINK_STATE 5 #define USB_PORT_FEAT_U1_TIMEOUT 23 #define USB_PORT_FEAT_U2_TIMEOUT 24 -#define USB_PORT_FEAT_C_LINK_STATE 25 -#define USB_PORT_FEAT_C_CONFIG_ERR 26 +#define USB_PORT_FEAT_C_PORT_LINK_STATE 25 +#define USB_PORT_FEAT_C_PORT_CONFIG_ERROR 26 #define USB_PORT_FEAT_REMOTE_WAKE_MASK 27 #define USB_PORT_FEAT_BH_PORT_RESET 28 #define USB_PORT_FEAT_C_BH_PORT_RESET 29 -- cgit v1.2.3 From 2c4967f741e87cdd63de7271b97807041dccbf3b Mon Sep 17 00:00:00 2001 From: Sujit Reddy Thumma Date: Sat, 4 Feb 2012 16:14:50 -0500 Subject: mmc: core: Ensure clocks are always enabled before host interaction Ensure clocks are always enabled before any interaction with the host controller driver. This makes sure that there is no race between host execution and the core layer turning off clocks in different context with clock gating framework. Signed-off-by: Sujit Reddy Thumma Acked-by: Linus Walleij Acked-by: Per Forlin Signed-off-by: Chris Ball --- include/linux/mmc/host.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 0beba1e5e1ed..73e5ee8e9ca2 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -444,4 +444,23 @@ static inline int mmc_boot_partition_access(struct mmc_host *host) return !(host->caps2 & MMC_CAP2_BOOTPART_NOACC); } +#ifdef CONFIG_MMC_CLKGATE +void mmc_host_clk_hold(struct mmc_host *host); +void mmc_host_clk_release(struct mmc_host *host); +unsigned int mmc_host_clk_rate(struct mmc_host *host); + +#else +static inline void mmc_host_clk_hold(struct mmc_host *host) +{ +} + +static inline void mmc_host_clk_release(struct mmc_host *host) +{ +} + +static inline unsigned int mmc_host_clk_rate(struct mmc_host *host) +{ + return host->ios.clock; +} +#endif #endif /* LINUX_MMC_HOST_H */ -- cgit v1.2.3 From 6e8201f57c9359c9c5dc8f9805c15a4392492a10 Mon Sep 17 00:00:00 2001 From: Jaehoon Chung Date: Mon, 16 Jan 2012 17:49:01 +0900 Subject: mmc: core: add the capability for broken voltage There is an understood mismatch between the voltage the host controller is set to and the voltage supplied to the card by a fixed voltage regulator. Teaching the driver to accept the mismatch is overly complicated. Instead just accept the regulator's voltage. This patch adds MMC_CAP2_BROKEN_VOLTAGE. If the voltage didn't satisfy between min_uV and max_uV, try to change the voltage in core.c. When changing the voltage, maybe use regulator_set_voltage(). In regulator_set_voltage(), check the below condition. /* sanity check */ if (!rdev->desc->ops->set_voltage && !rdev->desc->ops->set_voltage_sel) { ret = -EINVAL; goto out; } If some board should use the fixed-regulator, always return -EINVAL. Then, eMMC didn't initialize always. So if use a fixed-regulator, we need to add the MMC_CAP2_BROKEN_VOLTAGE. Signed-off-by: Jaehoon Chung Signed-off-by: Kyungmin Park Acked-by: Adrian Hunter Signed-off-by: Chris Ball --- include/linux/mmc/host.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 73e5ee8e9ca2..ee2b0363c040 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -257,6 +257,7 @@ struct mmc_host { #define MMC_CAP2_HS200_1_2V_SDR (1 << 6) /* can support */ #define MMC_CAP2_HS200 (MMC_CAP2_HS200_1_8V_SDR | \ MMC_CAP2_HS200_1_2V_SDR) +#define MMC_CAP2_BROKEN_VOLTAGE (1 << 7) /* Use the broken voltage */ mmc_pm_flag_t pm_caps; /* supported pm features */ unsigned int power_notify_type; -- cgit v1.2.3 From 3e73c36b4dc224529d0b0c0d5d69c0dacd793c42 Mon Sep 17 00:00:00 2001 From: Girish K S Date: Tue, 31 Jan 2012 15:44:03 +0530 Subject: mmc: core: Fix PowerOff Notify suspend/resume Modified the mmc_poweroff to resume before sending the poweroff notification command. In sleep mode only AWAKE and RESET commands are allowed, so before sending the poweroff notification command resume from sleep mode and then send the notification command. PowerOff Notify is tested on a Synopsis Designware Host Controller (eMMC 4.5). The suspend to RAM and resume works fine. Signed-off-by: Girish K S Tested-by: Girish K S Reviewed-by: Saugata Das Signed-off-by: Chris Ball --- include/linux/mmc/card.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 9f22ba572de0..19a41d1737af 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -217,6 +217,7 @@ struct mmc_card { #define MMC_CARD_SDXC (1<<6) /* card is SDXC */ #define MMC_CARD_REMOVED (1<<7) /* card has been removed */ #define MMC_STATE_HIGHSPEED_200 (1<<8) /* card is in HS200 mode */ +#define MMC_STATE_SLEEP (1<<9) /* card is in sleep state */ unsigned int quirks; /* card quirks */ #define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0 writes outside of the VS CCCR range */ #define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1) /* use func->cur_blksize */ @@ -382,6 +383,7 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data) #define mmc_sd_card_uhs(c) ((c)->state & MMC_STATE_ULTRAHIGHSPEED) #define mmc_card_ext_capacity(c) ((c)->state & MMC_CARD_SDXC) #define mmc_card_removed(c) ((c) && ((c)->state & MMC_CARD_REMOVED)) +#define mmc_card_is_sleep(c) ((c)->state & MMC_STATE_SLEEP) #define mmc_card_set_present(c) ((c)->state |= MMC_STATE_PRESENT) #define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY) @@ -393,7 +395,9 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data) #define mmc_sd_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED) #define mmc_card_set_ext_capacity(c) ((c)->state |= MMC_CARD_SDXC) #define mmc_card_set_removed(c) ((c)->state |= MMC_CARD_REMOVED) +#define mmc_card_set_sleep(c) ((c)->state |= MMC_STATE_SLEEP) +#define mmc_card_clr_sleep(c) ((c)->state &= ~MMC_STATE_SLEEP) /* * Quirk add/remove for MMC products. */ -- cgit v1.2.3 From f9c2a0dc42a6938ff2a80e55ca2bbd1d5581c72e Mon Sep 17 00:00:00 2001 From: Seungwon Jeon Date: Thu, 9 Feb 2012 14:32:43 +0900 Subject: mmc: dw_mmc: Fix PIO mode with support of highmem Current PIO mode makes a kernel crash with CONFIG_HIGHMEM. Highmem pages have a NULL from sg_virt(sg). This patch fixes the following problem. Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 817 [#1] PREEMPT SMP Modules linked in: CPU: 0 Not tainted (3.0.15-01423-gdbf465f #589) PC is at dw_mci_pull_data32+0x4c/0x9c LR is at dw_mci_read_data_pio+0x54/0x1f0 pc : [] lr : [] psr: 20000193 sp : c0619d48 ip : c0619d70 fp : c0619d6c r10: 00000000 r9 : 00000002 r8 : 00001000 r7 : 00000200 r6 : 00000000 r5 : e1dd3100 r4 : 00000000 r3 : 65622023 r2 : 0000007f r1 : eeb96000 r0 : e1dd3100 Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment xkernel Control: 10c5387d Table: 61e2004a DAC: 00000015 Process swapper (pid: 0, stack limit = 0xc06182f0) Stack: (0xc0619d48 to 0xc061a000) 9d40: e1dd3100 e1a4f000 00000000 e1dd3100 e1a4f000 00000200 9d60: c0619da4 c0619d70 c035988c c03587e4 c0619d9c e18158f4 e1dd3100 e1dd3100 9d80: 00000020 00000000 00000000 00000020 c06e8a84 00000000 c0619e04 c0619da8 9da0: c0359b24 c0359844 e18158f4 e1dd3164 e1dd3168 e1dd3150 3d02fc79 e1dd3154 9dc0: e1dd3178 00000000 00000020 00000000 e1dd3150 00000000 c10dd7e8 e1a84900 9de0: c061e7cc 00000000 00000000 0000008d c06e8a84 c061e780 c0619e4c c0619e08 9e00: c00c4738 c0359a34 3d02fc79 00000000 c0619e4c c05a1698 c05a1670 c05a165c 9e20: c04de8b0 c061e780 c061e7cc e1a84900 ffffed68 0000008d c0618000 00000000 9e40: c0619e6c c0619e50 c00c48b4 c00c46c8 c061e780 c00423ac c061e7cc ffffed68 9e60: c0619e8c c0619e70 c00c7358 c00c487c 0000008d ffffee38 c0618000 ffffed68 9e80: c0619ea4 c0619e90 c00c4258 c00c72b0 c00423ac ffffee38 c0619ecc c0619ea8 9ea0: c004241c c00c4234 ffffffff f8810000 0000006d 00000002 00000001 7fffffff 9ec0: c0619f44 c0619ed0 c0048bc0 c00423c4 220ae7a9 00000000 386f0d30 0005d3a4 9ee0: c00423ac c10dd0b8 c06f2cd8 c0618000 c0594778 c003a674 7fffffff c0619f44 9f00: 386f0d30 c0619f18 c00a6f94 c005be3c 80000013 ffffffff 386f0d30 0005d3a4 9f20: 386f0d30 0005d2d1 c10dd0a8 c10dd0b8 c06f2cd8 c0618000 c0619f74 c0619f48 9f40: c0345858 c005be00 c00a2440 c0618000 c0618000 c00410d8 c06c1944 c00410fc 9f60: c0594778 c003a674 c0619f9c c0619f78 c004a7e8 c03457b4 c0618000 c06c18f8 9f80: 00000000 c0039c70 c06c18d4 c003a674 c0619fb4 c0619fa0 c04ceafc c004a714 9fa0: c06287b4 c06c18f8 c0619ff4 c0619fb8 c0008b68 c04cea68 c0008578 00000000 9fc0: 00000000 c003a674 00000000 10c5387d c0628658 c003aa78 c062f1c4 4000406a 9fe0: 413fc090 00000000 00000000 c0619ff8 40008044 c0008858 00000000 00000000 Backtrace: [] (dw_mci_pull_data32+0x0/0x9c) from [] (dw_mci_read_data_pio+0x54/0x1f0) r6:00000200 r5:e1a4f000 r4:e1dd3100 [] (dw_mci_read_data_pio+0x0/0x1f0) from [] (dw_mci_interrupt+0xfc/0x4a4) [] (dw_mci_interrupt+0x0/0x4a4) from [] (handle_irq_event_percpu+0x7c/0x1b4) [] (handle_irq_event_percpu+0x0/0x1b4) from [] (handle_irq_event+0x44/0x64) [] (handle_irq_event+0x0/0x64) from [] (handle_fasteoi_irq+0xb4/0x124) r7:ffffed68 r6:c061e7cc r5:c00423ac r4:c061e780 [] (handle_fasteoi_irq+0x0/0x124) from [] (generic_handle_irq+0x30/0x38) r7:ffffed68 r6:c0618000 r5:ffffee38 r4:0000008d [] (generic_handle_irq+0x0/0x38) from [] (asm_do_IRQ+0x64/0xe0) r5:ffffee38 r4:c00423ac [] (asm_do_IRQ+0x0/0xe0) from [] (__irq_svc+0x80/0x14c) Exception stack(0xc0619ed0 to 0xc0619f18) Signed-off-by: Seungwon Jeon Acked-by: Will Newton Cc: stable Signed-off-by: Chris Ball --- include/linux/mmc/dw_mmc.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h index e8779c6d1759..aae5d1f1bb39 100644 --- a/include/linux/mmc/dw_mmc.h +++ b/include/linux/mmc/dw_mmc.h @@ -14,6 +14,8 @@ #ifndef LINUX_MMC_DW_MMC_H #define LINUX_MMC_DW_MMC_H +#include + #define MAX_MCI_SLOTS 2 enum dw_mci_state { @@ -40,7 +42,7 @@ struct mmc_data; * @lock: Spinlock protecting the queue and associated data. * @regs: Pointer to MMIO registers. * @sg: Scatterlist entry currently being processed by PIO code, if any. - * @pio_offset: Offset into the current scatterlist entry. + * @sg_miter: PIO mapping scatterlist iterator. * @cur_slot: The slot which is currently using the controller. * @mrq: The request currently being processed on @cur_slot, * or NULL if the controller is idle. @@ -115,7 +117,7 @@ struct dw_mci { void __iomem *regs; struct scatterlist *sg; - unsigned int pio_offset; + struct sg_mapping_iter sg_miter; struct dw_mci_slot *cur_slot; struct mmc_request *mrq; -- cgit v1.2.3 From 6b6dc836a195e077e76977b6c020a73de411b46d Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Fri, 10 Feb 2012 11:03:00 +0100 Subject: vfs: Provide function to get superblock and wait for it to thaw In quota code we need to find a superblock corresponding to a device and wait for superblock to be unfrozen. However this waiting has to happen without s_umount semaphore because that is required for superblock to thaw. So provide a function in VFS for this to keep dances with s_umount where they belong. [AV: implementation switched to saner variant] Signed-off-by: Jan Kara Signed-off-by: Al Viro --- include/linux/fs.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 386da09f229d..69cd5bb640f5 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2496,6 +2496,7 @@ extern void get_filesystem(struct file_system_type *fs); extern void put_filesystem(struct file_system_type *fs); extern struct file_system_type *get_fs_type(const char *name); extern struct super_block *get_super(struct block_device *); +extern struct super_block *get_super_thawed(struct block_device *); extern struct super_block *get_active_super(struct block_device *bdev); extern void drop_super(struct super_block *sb); extern void iterate_supers(void (*)(struct super_block *, void *), void *); -- cgit v1.2.3 From f2ea0f5f04c97b48c88edccba52b0682fbe45087 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Sat, 14 Jan 2012 21:44:49 +0300 Subject: crypto: sha512 - use standard ror64() Use standard ror64() instead of hand-written. There is no standard ror64, so create it. The difference is shift value being "unsigned int" instead of uint64_t (for which there is no reason). gcc starts to emit native ROR instructions which it doesn't do for some reason currently. This should make the code faster. Patch survives in-tree crypto test and ping flood with hmac(sha512) on. Signed-off-by: Alexey Dobriyan Signed-off-by: Herbert Xu --- include/linux/bitops.h | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'include/linux') diff --git a/include/linux/bitops.h b/include/linux/bitops.h index a3ef66a2a083..fc8a3ffce320 100644 --- a/include/linux/bitops.h +++ b/include/linux/bitops.h @@ -49,6 +49,26 @@ static inline unsigned long hweight_long(unsigned long w) return sizeof(w) == 4 ? hweight32(w) : hweight64(w); } +/** + * rol64 - rotate a 64-bit value left + * @word: value to rotate + * @shift: bits to roll + */ +static inline __u64 rol64(__u64 word, unsigned int shift) +{ + return (word << shift) | (word >> (64 - shift)); +} + +/** + * ror64 - rotate a 64-bit value right + * @word: value to rotate + * @shift: bits to roll + */ +static inline __u64 ror64(__u64 word, unsigned int shift) +{ + return (word >> shift) | (word << (64 - shift)); +} + /** * rol32 - rotate a 32-bit value left * @word: value to rotate -- cgit v1.2.3 From 59cca653a601372e9b4a430d867377a3e4a36d76 Mon Sep 17 00:00:00 2001 From: Dmitry Kasatkin Date: Thu, 2 Feb 2012 10:46:49 +0200 Subject: digsig: changed type of the timestamp time_t was used in the signature and key packet headers, which is typedef of long and is different on 32 and 64 bit architectures. Signature and key format should be independent of architecture. Similar to GPG, I have changed the type to uint32_t. Signed-off-by: Dmitry Kasatkin Signed-off-by: James Morris --- include/linux/digsig.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/digsig.h b/include/linux/digsig.h index b01558b15814..6f85a070bb45 100644 --- a/include/linux/digsig.h +++ b/include/linux/digsig.h @@ -30,7 +30,7 @@ enum digest_algo { struct pubkey_hdr { uint8_t version; /* key format version */ - time_t timestamp; /* key made, always 0 for now */ + uint32_t timestamp; /* key made, always 0 for now */ uint8_t algo; uint8_t nmpi; char mpi[0]; @@ -38,7 +38,7 @@ struct pubkey_hdr { struct signature_hdr { uint8_t version; /* signature format version */ - time_t timestamp; /* signature made */ + uint32_t timestamp; /* signature made */ uint8_t algo; uint8_t hash; uint8_t keyid[8]; -- cgit v1.2.3 From faf309009e2e18d30c032b7d9479f29b91677c37 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2012 17:24:20 -0800 Subject: sys_poll: fix incorrect type for 'timeout' parameter The 'poll()' system call timeout parameter is supposed to be 'int', not 'long'. Now, the reason this matters is that right now 32-bit compat mode is broken on at least x86-64, because the 32-bit code just calls 'sys_poll()' directly on x86-64, and the 32-bit argument will have been zero-extended, turning a signed 'int' into a large unsigned 'long' value. We could just introduce a 'compat_sys_poll()' function for this, and that may eventually be what we have to do, but since the actual standard poll() semantics is *supposed* to be 'int', and since at least on x86-64 glibc sign-extends the argument before invocing the system call (so nobody can actually use a 64-bit timeout value in user space _anyway_, even in 64-bit binaries), the simpler solution would seem to be to just fix the definition of the system call to match what it should have been from the very start. If it turns out that somebody somehow circumvents the user-level libc 64-bit sign extension and actually uses a large unsigned 64-bit timeout despite that not being how poll() is supposed to work, we will need to do the compat_sys_poll() approach. Reported-by: Thomas Meyer Acked-by: Eric Dumazet Signed-off-by: Linus Torvalds --- include/linux/syscalls.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index 515669fa3c1d..8ec1153ff57b 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -624,7 +624,7 @@ asmlinkage long sys_socketpair(int, int, int, int __user *); asmlinkage long sys_socketcall(int call, unsigned long __user *args); asmlinkage long sys_listen(int, int); asmlinkage long sys_poll(struct pollfd __user *ufds, unsigned int nfds, - long timeout); + int timeout); asmlinkage long sys_select(int n, fd_set __user *inp, fd_set __user *outp, fd_set __user *exp, struct timeval __user *tvp); asmlinkage long sys_old_select(struct sel_arg_struct __user *arg); -- cgit v1.2.3 From d80e731ecab420ddcb79ee9d0ac427acbc187b4b Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Fri, 24 Feb 2012 20:07:11 +0100 Subject: epoll: introduce POLLFREE to flush ->signalfd_wqh before kfree() This patch is intentionally incomplete to simplify the review. It ignores ep_unregister_pollwait() which plays with the same wqh. See the next change. epoll assumes that the EPOLL_CTL_ADD'ed file controls everything f_op->poll() needs. In particular it assumes that the wait queue can't go away until eventpoll_release(). This is not true in case of signalfd, the task which does EPOLL_CTL_ADD uses its ->sighand which is not connected to the file. This patch adds the special event, POLLFREE, currently only for epoll. It expects that init_poll_funcptr()'ed hook should do the necessary cleanup. Perhaps it should be defined as EPOLLFREE in eventpoll. __cleanup_sighand() is changed to do wake_up_poll(POLLFREE) if ->signalfd_wqh is not empty, we add the new signalfd_cleanup() helper. ep_poll_callback(POLLFREE) simply does list_del_init(task_list). This make this poll entry inconsistent, but we don't care. If you share epoll fd which contains our sigfd with another process you should blame yourself. signalfd is "really special". I simply do not know how we can define the "right" semantics if it used with epoll. The main problem is, epoll calls signalfd_poll() once to establish the connection with the wait queue, after that signalfd_poll(NULL) returns the different/inconsistent results depending on who does EPOLL_CTL_MOD/signalfd_read/etc. IOW: apart from sigmask, signalfd has nothing to do with the file, it works with the current thread. In short: this patch is the hack which tries to fix the symptoms. It also assumes that nobody can take tasklist_lock under epoll locks, this seems to be true. Note: - we do not have wake_up_all_poll() but wake_up_poll() is fine, poll/epoll doesn't use WQ_FLAG_EXCLUSIVE. - signalfd_cleanup() uses POLLHUP along with POLLFREE, we need a couple of simple changes in eventpoll.c to make sure it can't be "lost". Reported-by: Maxime Bizon Cc: Signed-off-by: Oleg Nesterov Signed-off-by: Linus Torvalds --- include/linux/signalfd.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/signalfd.h b/include/linux/signalfd.h index 3ff4961da9b5..247399b2979a 100644 --- a/include/linux/signalfd.h +++ b/include/linux/signalfd.h @@ -61,13 +61,16 @@ static inline void signalfd_notify(struct task_struct *tsk, int sig) wake_up(&tsk->sighand->signalfd_wqh); } +extern void signalfd_cleanup(struct sighand_struct *sighand); + #else /* CONFIG_SIGNALFD */ static inline void signalfd_notify(struct task_struct *tsk, int sig) { } +static inline void signalfd_cleanup(struct sighand_struct *sighand) { } + #endif /* CONFIG_SIGNALFD */ #endif /* __KERNEL__ */ #endif /* _LINUX_SIGNALFD_H */ - -- cgit v1.2.3