From e08e19c331fb249e6dc86365ee80d16045c4aeb1 Mon Sep 17 00:00:00 2001 From: "H. Nikolaus Schaller" Date: Fri, 16 Oct 2015 14:53:38 +0200 Subject: iio:adc: add iio driver for Palmas (twl6035/7) gpadc This driver code was found as: https://android.googlesource.com/kernel/tegra/+/aaabb2e045f31e5a970109ffdaae900dd403d17e/drivers/staging/iio/adc Fixed various compilation issues and test this driver on omap5 evm. Signed-off-by: Pradeep Goudagunta Signed-off-by: H. Nikolaus Schaller Signed-off-by: Marek Belisko Acked-by: Laxman Dewangan Reviewed-by: Jonathan Cameron Acked-by: Lee Jones Signed-off-by: Jonathan Cameron --- include/linux/mfd/palmas.h | 75 +++++++++++++++++++++++++++++++--------------- 1 file changed, 51 insertions(+), 24 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/palmas.h b/include/linux/mfd/palmas.h index 13e1d96935ed..c800dbc42079 100644 --- a/include/linux/mfd/palmas.h +++ b/include/linux/mfd/palmas.h @@ -134,21 +134,32 @@ struct palmas_pmic_driver_data { struct regulator_config config); }; +struct palmas_adc_wakeup_property { + int adc_channel_number; + int adc_high_threshold; + int adc_low_threshold; +}; + struct palmas_gpadc_platform_data { /* Channel 3 current source is only enabled during conversion */ - int ch3_current; + int ch3_current; /* 0: off; 1: 10uA; 2: 400uA; 3: 800 uA */ /* Channel 0 current source can be used for battery detection. * If used for battery detection this will cause a permanent current * consumption depending on current level set here. */ - int ch0_current; + int ch0_current; /* 0: off; 1: 5uA; 2: 15uA; 3: 20 uA */ + bool extended_delay; /* use extended delay for conversion */ /* default BAT_REMOVAL_DAT setting on device probe */ int bat_removal; /* Sets the START_POLARITY bit in the RT_CTRL register */ int start_polarity; + + int auto_conversion_period_ms; + struct palmas_adc_wakeup_property *adc_wakeup1_data; + struct palmas_adc_wakeup_property *adc_wakeup2_data; }; struct palmas_reg_init { @@ -405,28 +416,7 @@ struct palmas_gpadc_calibration { s32 offset_error; }; -struct palmas_gpadc { - struct device *dev; - struct palmas *palmas; - - int ch3_current; - int ch0_current; - - int gpadc_force; - - int bat_removal; - - struct mutex reading_lock; - struct completion irq_complete; - - int eoc_sw_irq; - - struct palmas_gpadc_calibration *palmas_cal_tbl; - - int conv0_channel; - int conv1_channel; - int rt_channel; -}; +#define PALMAS_DATASHEET_NAME(_name) "palmas-gpadc-chan-"#_name struct palmas_gpadc_result { s32 raw_code; @@ -520,6 +510,43 @@ enum palmas_irqs { PALMAS_NUM_IRQ, }; +/* Palmas GPADC Channels */ +enum { + PALMAS_ADC_CH_IN0, + PALMAS_ADC_CH_IN1, + PALMAS_ADC_CH_IN2, + PALMAS_ADC_CH_IN3, + PALMAS_ADC_CH_IN4, + PALMAS_ADC_CH_IN5, + PALMAS_ADC_CH_IN6, + PALMAS_ADC_CH_IN7, + PALMAS_ADC_CH_IN8, + PALMAS_ADC_CH_IN9, + PALMAS_ADC_CH_IN10, + PALMAS_ADC_CH_IN11, + PALMAS_ADC_CH_IN12, + PALMAS_ADC_CH_IN13, + PALMAS_ADC_CH_IN14, + PALMAS_ADC_CH_IN15, + PALMAS_ADC_CH_MAX, +}; + +/* Palmas GPADC Channel0 Current Source */ +enum { + PALMAS_ADC_CH0_CURRENT_SRC_0, + PALMAS_ADC_CH0_CURRENT_SRC_5, + PALMAS_ADC_CH0_CURRENT_SRC_15, + PALMAS_ADC_CH0_CURRENT_SRC_20, +}; + +/* Palmas GPADC Channel3 Current Source */ +enum { + PALMAS_ADC_CH3_CURRENT_SRC_0, + PALMAS_ADC_CH3_CURRENT_SRC_10, + PALMAS_ADC_CH3_CURRENT_SRC_400, + PALMAS_ADC_CH3_CURRENT_SRC_800, +}; + struct palmas_pmic { struct palmas *palmas; struct device *dev; -- cgit v1.2.3 From b440655b896b2d5a2fb5f918801fb0e281a537cd Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Tue, 13 Oct 2015 18:10:26 +0200 Subject: iio: Add support for indicating fixed watermarks For buffers which have a fixed wake-up watermark the watermark attribute should be read-only. Add a new FIXED_WATERMARK flag to the struct iio_buffer_access_funcs, which can be set by a buffer implementation. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- include/linux/iio/buffer.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/iio/buffer.h b/include/linux/iio/buffer.h index 1600c55828e0..4d99a53d1fe7 100644 --- a/include/linux/iio/buffer.h +++ b/include/linux/iio/buffer.h @@ -17,6 +17,12 @@ struct iio_buffer; +/** + * INDIO_BUFFER_FLAG_FIXED_WATERMARK - Watermark level of the buffer can not be + * configured. It has a fixed value which will be buffer specific. + */ +#define INDIO_BUFFER_FLAG_FIXED_WATERMARK BIT(0) + /** * struct iio_buffer_access_funcs - access functions for buffers. * @store_to: actually store stuff to the buffer @@ -30,6 +36,7 @@ struct iio_buffer; * @release: called when the last reference to the buffer is dropped, * should free all resources allocated by the buffer. * @modes: Supported operating modes by this buffer type + * @flags: A bitmask combination of INDIO_BUFFER_FLAG_* * * The purpose of this structure is to make the buffer element * modular as event for a given driver, different usecases may require @@ -54,6 +61,7 @@ struct iio_buffer_access_funcs { void (*release)(struct iio_buffer *buffer); unsigned int modes; + unsigned int flags; }; /** -- cgit v1.2.3 From e18a2ad45caeb11226e49c25068d0f2efe2adf6c Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Tue, 13 Oct 2015 18:10:27 +0200 Subject: iio: Add buffer enable/disable callbacks This patch adds a enable and disable callback that is called when the buffer is enabled/disabled. This can be used by buffer implementations that need to do some setup or teardown work. E.g. a DMA based buffer can use this to start/stop the DMA transfer. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- include/linux/iio/buffer.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/iio/buffer.h b/include/linux/iio/buffer.h index 4d99a53d1fe7..2ec3ad58e8a0 100644 --- a/include/linux/iio/buffer.h +++ b/include/linux/iio/buffer.h @@ -33,6 +33,11 @@ struct iio_buffer; * storage. * @set_bytes_per_datum:set number of bytes per datum * @set_length: set number of datums in buffer + * @enable: called if the buffer is attached to a device and the + * device starts sampling. Calls are balanced with + * @disable. + * @disable: called if the buffer is attached to a device and the + * device stops sampling. Calles are balanced with @enable. * @release: called when the last reference to the buffer is dropped, * should free all resources allocated by the buffer. * @modes: Supported operating modes by this buffer type @@ -58,6 +63,9 @@ struct iio_buffer_access_funcs { int (*set_bytes_per_datum)(struct iio_buffer *buffer, size_t bpd); int (*set_length)(struct iio_buffer *buffer, int length); + int (*enable)(struct iio_buffer *buffer, struct iio_dev *indio_dev); + int (*disable)(struct iio_buffer *buffer, struct iio_dev *indio_dev); + void (*release)(struct iio_buffer *buffer); unsigned int modes; -- cgit v1.2.3 From 670b19ae9bfdbcb4ce2c2ffb2ec1659a7f4a2074 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Tue, 13 Oct 2015 18:10:28 +0200 Subject: iio: Add generic DMA buffer infrastructure The traditional approach used in IIO to implement buffered capture requires the generation of at least one interrupt per sample. In the interrupt handler the driver reads the sample from the device and copies it to a software buffer. This approach has a rather large per sample overhead associated with it. And while it works fine for samplerates in the range of up to 1000 samples per second it starts to consume a rather large share of the available CPU processing time once we go beyond that, this is especially true on an embedded system with limited processing power. The regular interrupt also causes increased power consumption by not allowing the hardware into deeper sleep states, which is something that becomes more and more important on mobile battery powered devices. And while the recently added watermark support mitigates some of the issues by allowing the device to generate interrupts at a rate lower than the data output rate, this still requires a storage buffer inside the device and even if it exists it is only a few 100 samples deep at most. DMA support on the other hand allows to capture multiple millions or even more samples without any CPU interaction. This allows the CPU to either go to sleep for longer periods or focus on other tasks which increases overall system performance and power consumption. In addition to that some devices might not even offer a way to read the data other than using DMA, which makes DMA mandatory to use for them. The tasks involved in implementing a DMA buffer can be divided into two categories. The first category is memory buffer management (allocation, mapping, etc.) and hooking this up the IIO buffer callbacks like read(), enable(), disable(), etc. The second category of tasks is to setup the DMA hardware and manage the DMA transfers. Tasks from the first category will be very similar for all IIO drivers supporting DMA buffers, while the tasks from the second category will be hardware specific. This patch implements a generic infrastructure that take care of the former tasks. It provides a set of functions that implement the standard IIO buffer iio_buffer_access_funcs callbacks. These can either be used as is or be overloaded and augmented with driver specific code where necessary. For the DMA buffer support infrastructure that is introduced in this series sample data is grouped by so called blocks. A block is the basic unit at which data is exchanged between the application and the hardware. The application is responsible for allocating the memory associated with the block and then passes the block to the hardware. When the hardware has captured the amount of samples equal to size of a block it will notify the application, which can then read the data from the block and process it. The block size can freely chosen (within the constraints of the hardware). This allows to make a trade-off between latency and management overhead. The larger the block size the lower the per sample overhead but the latency between when the data was captured and when the application will be able to access it increases, in a similar way smaller block sizes have a larger per sample management overhead but a lower latency. The ideal block size thus depends on system and application requirements. For the time being the infrastructure only implements a simple double buffered scheme which allocates two blocks each with half the size of the configured buffer size. This provides basic support for capturing continuous uninterrupted data over the existing file-IO ABI. Future extensions to the DMA buffer infrastructure will give applications a more fine grained control over how many blocks are allocated and the size of each block. But this requires userspace ABI additions which are intentionally not part of this patch and will be added separately. Tasks of the second category need to be implemented by a device specific driver. They can be hooked up into the generic infrastructure using two simple callbacks, submit() and abort(). The submit() callback is used to schedule DMA transfers for blocks. Once a DMA transfer has been completed it is expected that the buffer driver calls iio_dma_buffer_block_done() to notify. The abort() callback is used for stopping all pending and active DMA transfers when the buffer is disabled. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- include/linux/iio/buffer-dma.h | 152 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 152 insertions(+) create mode 100644 include/linux/iio/buffer-dma.h (limited to 'include/linux') diff --git a/include/linux/iio/buffer-dma.h b/include/linux/iio/buffer-dma.h new file mode 100644 index 000000000000..767467d886de --- /dev/null +++ b/include/linux/iio/buffer-dma.h @@ -0,0 +1,152 @@ +/* + * Copyright 2013-2015 Analog Devices Inc. + * Author: Lars-Peter Clausen + * + * Licensed under the GPL-2. + */ + +#ifndef __INDUSTRIALIO_DMA_BUFFER_H__ +#define __INDUSTRIALIO_DMA_BUFFER_H__ + +#include +#include +#include +#include +#include + +struct iio_dma_buffer_queue; +struct iio_dma_buffer_ops; +struct device; + +struct iio_buffer_block { + u32 size; + u32 bytes_used; +}; + +/** + * enum iio_block_state - State of a struct iio_dma_buffer_block + * @IIO_BLOCK_STATE_DEQUEUED: Block is not queued + * @IIO_BLOCK_STATE_QUEUED: Block is on the incoming queue + * @IIO_BLOCK_STATE_ACTIVE: Block is currently being processed by the DMA + * @IIO_BLOCK_STATE_DONE: Block is on the outgoing queue + * @IIO_BLOCK_STATE_DEAD: Block has been marked as to be freed + */ +enum iio_block_state { + IIO_BLOCK_STATE_DEQUEUED, + IIO_BLOCK_STATE_QUEUED, + IIO_BLOCK_STATE_ACTIVE, + IIO_BLOCK_STATE_DONE, + IIO_BLOCK_STATE_DEAD, +}; + +/** + * struct iio_dma_buffer_block - IIO buffer block + * @head: List head + * @size: Total size of the block in bytes + * @bytes_used: Number of bytes that contain valid data + * @vaddr: Virutal address of the blocks memory + * @phys_addr: Physical address of the blocks memory + * @queue: Parent DMA buffer queue + * @kref: kref used to manage the lifetime of block + * @state: Current state of the block + */ +struct iio_dma_buffer_block { + /* May only be accessed by the owner of the block */ + struct list_head head; + size_t bytes_used; + + /* + * Set during allocation, constant thereafter. May be accessed read-only + * by anybody holding a reference to the block. + */ + void *vaddr; + dma_addr_t phys_addr; + size_t size; + struct iio_dma_buffer_queue *queue; + + /* Must not be accessed outside the core. */ + struct kref kref; + /* + * Must not be accessed outside the core. Access needs to hold + * queue->list_lock if the block is not owned by the core. + */ + enum iio_block_state state; +}; + +/** + * struct iio_dma_buffer_queue_fileio - FileIO state for the DMA buffer + * @blocks: Buffer blocks used for fileio + * @active_block: Block being used in read() + * @pos: Read offset in the active block + * @block_size: Size of each block + */ +struct iio_dma_buffer_queue_fileio { + struct iio_dma_buffer_block *blocks[2]; + struct iio_dma_buffer_block *active_block; + size_t pos; + size_t block_size; +}; + +/** + * struct iio_dma_buffer_queue - DMA buffer base structure + * @buffer: IIO buffer base structure + * @dev: Parent device + * @ops: DMA buffer callbacks + * @lock: Protects the incoming list, active and the fields in the fileio + * substruct + * @list_lock: Protects lists that contain blocks which can be modified in + * atomic context as well as blocks on those lists. This is the outgoing queue + * list and typically also a list of active blocks in the part that handles + * the DMA controller + * @incoming: List of buffers on the incoming queue + * @outgoing: List of buffers on the outgoing queue + * @active: Whether the buffer is currently active + * @fileio: FileIO state + */ +struct iio_dma_buffer_queue { + struct iio_buffer buffer; + struct device *dev; + const struct iio_dma_buffer_ops *ops; + + struct mutex lock; + spinlock_t list_lock; + struct list_head incoming; + struct list_head outgoing; + + bool active; + + struct iio_dma_buffer_queue_fileio fileio; +}; + +/** + * struct iio_dma_buffer_ops - DMA buffer callback operations + * @submit: Called when a block is submitted to the DMA controller + * @abort: Should abort all pending transfers + */ +struct iio_dma_buffer_ops { + int (*submit)(struct iio_dma_buffer_queue *queue, + struct iio_dma_buffer_block *block); + void (*abort)(struct iio_dma_buffer_queue *queue); +}; + +void iio_dma_buffer_block_done(struct iio_dma_buffer_block *block); +void iio_dma_buffer_block_list_abort(struct iio_dma_buffer_queue *queue, + struct list_head *list); + +int iio_dma_buffer_enable(struct iio_buffer *buffer, + struct iio_dev *indio_dev); +int iio_dma_buffer_disable(struct iio_buffer *buffer, + struct iio_dev *indio_dev); +int iio_dma_buffer_read(struct iio_buffer *buffer, size_t n, + char __user *user_buffer); +size_t iio_dma_buffer_data_available(struct iio_buffer *buffer); +int iio_dma_buffer_set_bytes_per_datum(struct iio_buffer *buffer, size_t bpd); +int iio_dma_buffer_set_length(struct iio_buffer *buffer, int length); +int iio_dma_buffer_request_update(struct iio_buffer *buffer); + +int iio_dma_buffer_init(struct iio_dma_buffer_queue *queue, + struct device *dma_dev, const struct iio_dma_buffer_ops *ops); +void iio_dma_buffer_exit(struct iio_dma_buffer_queue *queue); +void iio_dma_buffer_release(struct iio_dma_buffer_queue *queue); + +#endif -- cgit v1.2.3 From 2d6ca60f328450ff5c7802d0857d12e3711348ce Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Tue, 13 Oct 2015 18:10:29 +0200 Subject: iio: Add a DMAengine framework based buffer Add a generic fully device independent DMA buffer implementation that uses the DMAegnine framework to perform the DMA transfers. This can be used by converter drivers that whish to provide a DMA buffer for converters that are connected to a DMA core that implements the DMAengine API. Apart from allocating the buffer using iio_dmaengine_buffer_alloc() and freeing it using iio_dmaengine_buffer_free() no additional converter driver specific code is required when using this DMA buffer implementation. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- include/linux/iio/buffer-dmaengine.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 include/linux/iio/buffer-dmaengine.h (limited to 'include/linux') diff --git a/include/linux/iio/buffer-dmaengine.h b/include/linux/iio/buffer-dmaengine.h new file mode 100644 index 000000000000..5dcddf427bb0 --- /dev/null +++ b/include/linux/iio/buffer-dmaengine.h @@ -0,0 +1,18 @@ +/* + * Copyright 2014-2015 Analog Devices Inc. + * Author: Lars-Peter Clausen + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __IIO_DMAENGINE_H__ +#define __IIO_DMAENGINE_H__ + +struct iio_buffer; +struct device; + +struct iio_buffer *iio_dmaengine_buffer_alloc(struct device *dev, + const char *channel); +void iio_dmaengine_buffer_free(struct iio_buffer *buffer); + +#endif -- cgit v1.2.3 From 28b8b26b308e656edfa9467867d5f79212da2ec3 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Fri, 30 Oct 2015 20:33:20 -0700 Subject: mtd: add get/set of_node/flash_node helpers We are going to begin using the mtd->dev.of_node field for MTD device nodes, so let's add helpers for it. Also, we'll be making some conversions on spi_nor (and nand_chip eventually) too, so get that ready with their own helpers. Signed-off-by: Brian Norris Reviewed-by: Boris Brezillon --- include/linux/mtd/mtd.h | 11 +++++++++++ include/linux/mtd/nand.h | 11 +++++++++++ include/linux/mtd/spi-nor.h | 11 +++++++++++ 3 files changed, 33 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index f17fa75809aa..cc84923011c0 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -254,6 +254,17 @@ struct mtd_info { int usecount; }; +static inline void mtd_set_of_node(struct mtd_info *mtd, + struct device_node *np) +{ + mtd->dev.of_node = np; +} + +static inline struct device_node *mtd_get_of_node(struct mtd_info *mtd) +{ + return mtd->dev.of_node; +} + int mtd_erase(struct mtd_info *mtd, struct erase_info *instr); int mtd_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, void **virt, resource_size_t *phys); diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 5a9d1d4c2487..4f7c9b97982f 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -719,6 +719,17 @@ struct nand_chip { void *priv; }; +static inline void nand_set_flash_node(struct nand_chip *chip, + struct device_node *np) +{ + chip->flash_node = np; +} + +static inline struct device_node *nand_get_flash_node(struct nand_chip *chip) +{ + return chip->flash_node; +} + /* * NAND Flash Manufacturer ID Codes */ diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index c8723b62c4cd..6d991df8f986 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -185,6 +185,17 @@ struct spi_nor { void *priv; }; +static inline void spi_nor_set_flash_node(struct spi_nor *nor, + struct device_node *np) +{ + nor->flash_node = np; +} + +static inline struct device_node *spi_nor_get_flash_node(struct spi_nor *nor) +{ + return nor->flash_node; +} + /** * spi_nor_scan() - scan the SPI NOR * @nor: the spi_nor structure -- cgit v1.2.3 From 3b6521eab0386a4854d47b1a01947d7dc46ec98d Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Fri, 30 Oct 2015 20:33:21 -0700 Subject: mtd: ofpart: grab device tree node directly from master device node It seems more logical to use a device node directly associated with the MTD master device (i.e., mtd->dev.of_node field) rather than requiring auxiliary partition parser information to be passed in by the driver in a separate struct. This patch supports the mtd->dev.of_node field and deprecates the parser data 'of_node' field Driver conversions may now follow. Additional side benefit to assigning mtd->dev.of_node rather than using parser data: the driver core will automatically create a device -> node symlink for us. Signed-off-by: Brian Norris Reviewed-by: Boris Brezillon --- include/linux/mtd/partitions.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h index 6a35e6de5da1..e742f34b67eb 100644 --- a/include/linux/mtd/partitions.h +++ b/include/linux/mtd/partitions.h @@ -56,7 +56,9 @@ struct device_node; /** * struct mtd_part_parser_data - used to pass data to MTD partition parsers. * @origin: for RedBoot, start address of MTD device - * @of_node: for OF parsers, device node containing partitioning information + * @of_node: for OF parsers, device node containing partitioning information. + * This field is deprecated, as the device node should simply be + * assigned to the master struct device. */ struct mtd_part_parser_data { unsigned long origin; -- cgit v1.2.3 From 30069af7348b56eb8c5e1dda7788a531c5f24ca2 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Fri, 30 Oct 2015 20:33:27 -0700 Subject: mtd: spi-nor: drop flash_node field We can just alias to the MTD of_node. Signed-off-by: Brian Norris Reviewed-by: Boris Brezillon --- include/linux/mtd/spi-nor.h | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index 6d991df8f986..955f268d159a 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -124,7 +124,6 @@ struct mtd_info; * @mtd: point to a mtd_info structure * @lock: the lock for the read/write/erase/lock/unlock operations * @dev: point to a spi device, or a spi nor controller device. - * @flash_node: point to a device node describing this flash instance. * @page_size: the page size of the SPI NOR * @addr_width: number of address bytes * @erase_opcode: the opcode for erasing a sector @@ -155,7 +154,6 @@ struct spi_nor { struct mtd_info mtd; struct mutex lock; struct device *dev; - struct device_node *flash_node; u32 page_size; u8 addr_width; u8 erase_opcode; @@ -188,12 +186,12 @@ struct spi_nor { static inline void spi_nor_set_flash_node(struct spi_nor *nor, struct device_node *np) { - nor->flash_node = np; + mtd_set_of_node(&nor->mtd, np); } static inline struct device_node *spi_nor_get_flash_node(struct spi_nor *nor) { - return nor->flash_node; + return mtd_get_of_node(&nor->mtd); } /** -- cgit v1.2.3 From e270bca531b40cd0a143176eb093d173b9c6f418 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Fri, 30 Oct 2015 20:33:29 -0700 Subject: mtd: ofpart: drop 'of_node' partition parser data This field is no longer used anywhere, as it is superseded by mtd->dev.of_node. Signed-off-by: Brian Norris Reviewed-by: Boris Brezillon --- include/linux/mtd/partitions.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h index e742f34b67eb..773975a3c9e6 100644 --- a/include/linux/mtd/partitions.h +++ b/include/linux/mtd/partitions.h @@ -56,13 +56,9 @@ struct device_node; /** * struct mtd_part_parser_data - used to pass data to MTD partition parsers. * @origin: for RedBoot, start address of MTD device - * @of_node: for OF parsers, device node containing partitioning information. - * This field is deprecated, as the device node should simply be - * assigned to the master struct device. */ struct mtd_part_parser_data { unsigned long origin; - struct device_node *of_node; }; -- cgit v1.2.3 From 26add94cd535d1e000e7871fe69c7bb89e942d67 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Wed, 11 Nov 2015 17:05:56 -0800 Subject: mtd: partitions: kill unused ecclayout struct This field is not used. Reported here: http://lists.infradead.org/pipermail/linux-mtd/2015-October/062417.html Reported-by: Brian Foster Cc: Brian Foster Signed-off-by: Brian Norris Reviewed-by: Boris Brezillon --- include/linux/mtd/partitions.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h index 773975a3c9e6..8421520c10eb 100644 --- a/include/linux/mtd/partitions.h +++ b/include/linux/mtd/partitions.h @@ -41,7 +41,6 @@ struct mtd_partition { uint64_t size; /* partition size */ uint64_t offset; /* offset within the master MTD space */ uint32_t mask_flags; /* master MTD flags to mask out for this partition */ - struct nand_ecclayout *ecclayout; /* out of band layout for this partition (NAND only) */ }; #define MTDPART_OFS_RETAIN (-3) -- cgit v1.2.3 From b36f09c3c441a6e59eab9315032e7d546571de3f Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Tue, 20 Oct 2015 11:46:28 +0200 Subject: dmaengine: Add transfer termination synchronization support The DMAengine API has a long standing race condition that is inherent to the API itself. Calling dmaengine_terminate_all() is supposed to stop and abort any pending or active transfers that have previously been submitted. Unfortunately it is possible that this operation races against a currently running (or with some drivers also scheduled) completion callback. Since the API allows dmaengine_terminate_all() to be called from atomic context as well as from within a completion callback it is not possible to synchronize to the execution of the completion callback from within dmaengine_terminate_all() itself. This means that a user of the DMAengine API does not know when it is safe to free resources used in the completion callback, which can result in a use-after-free race condition. This patch addresses the issue by introducing an explicit synchronization primitive to the DMAengine API called dmaengine_synchronize(). The existing dmaengine_terminate_all() is deprecated in favor of dmaengine_terminate_sync() and dmaengine_terminate_async(). The former aborts all pending and active transfers and synchronizes to the current context, meaning it will wait until all running completion callbacks have finished. This means it is only possible to call this function from non-atomic context. The later function does not synchronize, but can still be used in atomic context or from within a complete callback. It has to be followed up by dmaengine_synchronize() before a client can free the resources used in a completion callback. In addition to this the semantics of the device_terminate_all() callback are slightly relaxed by this patch. It is now OK for a driver to only schedule the termination of the active transfer, but does not necessarily have to wait until the DMA controller has completely stopped. The driver must ensure though that the controller has stopped and no longer accesses any memory when the device_synchronize() callback returns. This was in part done since most drivers do not pay attention to this anyway at the moment and to emphasize that this needs to be done when the device_synchronize() callback is implemented. But it also helps with implementing support for devices where stopping the controller can require operations that may sleep. Signed-off-by: Lars-Peter Clausen Signed-off-by: Vinod Koul --- include/linux/dmaengine.h | 90 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 90 insertions(+) (limited to 'include/linux') diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index c47c68e535e8..4662d9aa6d5a 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -654,6 +654,8 @@ enum dmaengine_alignment { * paused. Returns 0 or an error code * @device_terminate_all: Aborts all transfers on a channel. Returns 0 * or an error code + * @device_synchronize: Synchronizes the termination of a transfers to the + * current context. * @device_tx_status: poll for transaction completion, the optional * txstate parameter can be supplied with a pointer to get a * struct with auxiliary transfer status information, otherwise the call @@ -737,6 +739,7 @@ struct dma_device { int (*device_pause)(struct dma_chan *chan); int (*device_resume)(struct dma_chan *chan); int (*device_terminate_all)(struct dma_chan *chan); + void (*device_synchronize)(struct dma_chan *chan); enum dma_status (*device_tx_status)(struct dma_chan *chan, dma_cookie_t cookie, @@ -828,6 +831,13 @@ static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_sg( src_sg, src_nents, flags); } +/** + * dmaengine_terminate_all() - Terminate all active DMA transfers + * @chan: The channel for which to terminate the transfers + * + * This function is DEPRECATED use either dmaengine_terminate_sync() or + * dmaengine_terminate_async() instead. + */ static inline int dmaengine_terminate_all(struct dma_chan *chan) { if (chan->device->device_terminate_all) @@ -836,6 +846,86 @@ static inline int dmaengine_terminate_all(struct dma_chan *chan) return -ENOSYS; } +/** + * dmaengine_terminate_async() - Terminate all active DMA transfers + * @chan: The channel for which to terminate the transfers + * + * Calling this function will terminate all active and pending descriptors + * that have previously been submitted to the channel. It is not guaranteed + * though that the transfer for the active descriptor has stopped when the + * function returns. Furthermore it is possible the complete callback of a + * submitted transfer is still running when this function returns. + * + * dmaengine_synchronize() needs to be called before it is safe to free + * any memory that is accessed by previously submitted descriptors or before + * freeing any resources accessed from within the completion callback of any + * perviously submitted descriptors. + * + * This function can be called from atomic context as well as from within a + * complete callback of a descriptor submitted on the same channel. + * + * If none of the two conditions above apply consider using + * dmaengine_terminate_sync() instead. + */ +static inline int dmaengine_terminate_async(struct dma_chan *chan) +{ + if (chan->device->device_terminate_all) + return chan->device->device_terminate_all(chan); + + return -EINVAL; +} + +/** + * dmaengine_synchronize() - Synchronize DMA channel termination + * @chan: The channel to synchronize + * + * Synchronizes to the DMA channel termination to the current context. When this + * function returns it is guaranteed that all transfers for previously issued + * descriptors have stopped and and it is safe to free the memory assoicated + * with them. Furthermore it is guaranteed that all complete callback functions + * for a previously submitted descriptor have finished running and it is safe to + * free resources accessed from within the complete callbacks. + * + * The behavior of this function is undefined if dma_async_issue_pending() has + * been called between dmaengine_terminate_async() and this function. + * + * This function must only be called from non-atomic context and must not be + * called from within a complete callback of a descriptor submitted on the same + * channel. + */ +static inline void dmaengine_synchronize(struct dma_chan *chan) +{ + if (chan->device->device_synchronize) + chan->device->device_synchronize(chan); +} + +/** + * dmaengine_terminate_sync() - Terminate all active DMA transfers + * @chan: The channel for which to terminate the transfers + * + * Calling this function will terminate all active and pending transfers + * that have previously been submitted to the channel. It is similar to + * dmaengine_terminate_async() but guarantees that the DMA transfer has actually + * stopped and that all complete callbacks have finished running when the + * function returns. + * + * This function must only be called from non-atomic context and must not be + * called from within a complete callback of a descriptor submitted on the same + * channel. + */ +static inline int dmaengine_terminate_sync(struct dma_chan *chan) +{ + int ret; + + ret = dmaengine_terminate_async(chan); + if (ret) + return ret; + + dmaengine_synchronize(chan); + + return 0; +} + static inline int dmaengine_pause(struct dma_chan *chan) { if (chan->device->device_pause) -- cgit v1.2.3 From 9eeacd3a2f17438d9d286ff2f78c4709a4148be7 Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Tue, 13 Oct 2015 21:54:29 +0200 Subject: dmaengine: enable DMA_CTRL_REUSE In the current state, the capability of transfer reuse can neither be set by a slave dmaengine driver, nor used by a client driver, because the capability is not available to dma_get_slave_caps(). Fix this by adding a way to declare the capability. Fixes: 272420214d26 ("dmaengine: Add DMA_CTRL_REUSE") Signed-off-by: Robert Jarzmik Signed-off-by: Vinod Koul --- include/linux/dmaengine.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index c47c68e535e8..6f94b5cbd97c 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -659,6 +659,7 @@ enum dmaengine_alignment { * struct with auxiliary transfer status information, otherwise the call * will just return a simple status code * @device_issue_pending: push pending transactions to hardware + * @descriptor_reuse: a submitted transfer can be resubmitted after completion */ struct dma_device { @@ -681,6 +682,7 @@ struct dma_device { u32 src_addr_widths; u32 dst_addr_widths; u32 directions; + bool descriptor_reuse; enum dma_residue_granularity residue_granularity; int (*device_alloc_chan_resources)(struct dma_chan *chan); -- cgit v1.2.3 From 2bb129ebb23d2dfec3cd9c22dc7defd681cfcd58 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Fri, 13 Nov 2015 12:46:00 +0100 Subject: dmaengine: ioatdma: constify dca_ops structures The dca_ops structure is never modified, so declare it as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall Acked-by: Dan Williams Signed-off-by: Vinod Koul --- include/linux/dca.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/dca.h b/include/linux/dca.h index d27a7a05718d..ad956c2e07a8 100644 --- a/include/linux/dca.h +++ b/include/linux/dca.h @@ -34,7 +34,7 @@ void dca_unregister_notify(struct notifier_block *nb); struct dca_provider { struct list_head node; - struct dca_ops *ops; + const struct dca_ops *ops; struct device *cd; int id; }; @@ -53,7 +53,8 @@ struct dca_ops { int (*dev_managed) (struct dca_provider *, struct device *); }; -struct dca_provider *alloc_dca_provider(struct dca_ops *ops, int priv_size); +struct dca_provider *alloc_dca_provider(const struct dca_ops *ops, + int priv_size); void free_dca_provider(struct dca_provider *dca); int register_dca_provider(struct dca_provider *dca, struct device *dev); void unregister_dca_provider(struct dca_provider *dca, struct device *dev); -- cgit v1.2.3 From 3ff3f518a135fa4592fe2817e9ac2cce1fa23dc2 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Mon, 9 Nov 2015 22:20:37 -0800 Subject: regulator: Make bulk API support optional supplies Make it possible to use the bulk API with optional supplies, by allowing the consumer to marking supplies as optional in the regulator_bulk_data. Signed-off-by: Bjorn Andersson Signed-off-by: Mark Brown --- include/linux/regulator/consumer.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index 9e0e76992be0..48603506f8de 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -140,6 +140,8 @@ struct regulator; * * @supply: The name of the supply. Initialised by the user before * using the bulk regulator APIs. + * @optional: The supply should be considered optional. Initialised by the user + * before using the bulk regulator APIs. * @consumer: The regulator consumer for the supply. This will be managed * by the bulk API. * @@ -149,6 +151,7 @@ struct regulator; */ struct regulator_bulk_data { const char *supply; + bool optional; struct regulator *consumer; /* private: Internal use */ -- cgit v1.2.3 From a0067db36a2f9733a2e956a44ef8145e6a809bdb Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 18 Nov 2015 15:21:32 +0100 Subject: spi: s3c64xx: pass DMA arguments in platform data The s3c64xx platform data already contains a pointer to the DMA filter function, but not to the associated data. This simplifies the code and makes it more generic by passing the data along with the filter function like we do for other drivers. Signed-off-by: Arnd Bergmann Signed-off-by: Mark Brown --- include/linux/platform_data/spi-s3c64xx.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/platform_data/spi-s3c64xx.h b/include/linux/platform_data/spi-s3c64xx.h index d3889b98a1a1..fb5625bcca9a 100644 --- a/include/linux/platform_data/spi-s3c64xx.h +++ b/include/linux/platform_data/spi-s3c64xx.h @@ -40,6 +40,8 @@ struct s3c64xx_spi_info { int num_cs; int (*cfg_gpio)(void); dma_filter_fn filter; + void *dma_tx; + void *dma_rx; }; /** -- cgit v1.2.3 From 9eba47ddd8fee8a21f45e6e1d707103f040d90c7 Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Mon, 16 Nov 2015 14:37:35 +0100 Subject: mtd: nand: add an mtd_to_nand() helper Some drivers are retrieving the nand_chip pointer using the container_of macro on a struct wrapping both the nand_chip and the mtd_info struct while the standard way of retrieving this pointer is through mtd->priv. Provide an helper to do that. Signed-off-by: Boris Brezillon Signed-off-by: Brian Norris --- include/linux/mtd/nand.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 5a9d1d4c2487..a4839b3f27da 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -719,6 +719,11 @@ struct nand_chip { void *priv; }; +static inline struct nand_chip *mtd_to_nand(struct mtd_info *mtd) +{ + return mtd->priv; +} + /* * NAND Flash Manufacturer ID Codes */ -- cgit v1.2.3 From c67cbb839da9cc2757eabfa128556db6a2baf160 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Tue, 10 Nov 2015 12:15:27 -0800 Subject: mtd: spi-nor: provide default erase_sector implementation Some spi-nor drivers perform sector erase by duplicating their write_reg() command. Let's not require that the driver fill this out, and provide a default instead. Tested on m25p80.c and Medatek's MT8173 SPI NOR flash driver. Signed-off-by: Brian Norris --- include/linux/mtd/spi-nor.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index 955f268d159a..7bed97471e53 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -143,7 +143,8 @@ struct mtd_info; * @read: [DRIVER-SPECIFIC] read data from the SPI NOR * @write: [DRIVER-SPECIFIC] write data to the SPI NOR * @erase: [DRIVER-SPECIFIC] erase a sector of the SPI NOR - * at the offset @offs + * at the offset @offs; if not provided by the driver, + * spi-nor will send the erase opcode via write_reg() * @flash_lock: [FLASH-SPECIFIC] lock a region of the SPI NOR * @flash_unlock: [FLASH-SPECIFIC] unlock a region of the SPI NOR * @flash_is_locked: [FLASH-SPECIFIC] check if a region of the SPI NOR is -- cgit v1.2.3 From b9eab01125bf3cb6f5fbab1811402d16c9fcf4ec Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Wed, 11 Nov 2015 19:13:29 -0800 Subject: mtd: partitions: add module_mtd_part_parser() helper This can help eliminate some boilerplate by generating the module_init() and module_exit() functions, and by automatically assigning the module owner. Signed-off-by: Brian Norris --- include/linux/mtd/partitions.h | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h index 8421520c10eb..d002d9b5d797 100644 --- a/include/linux/mtd/partitions.h +++ b/include/linux/mtd/partitions.h @@ -73,9 +73,21 @@ struct mtd_part_parser { struct mtd_part_parser_data *); }; -extern void register_mtd_parser(struct mtd_part_parser *parser); +extern int __register_mtd_parser(struct mtd_part_parser *parser, + struct module *owner); +#define register_mtd_parser(parser) __register_mtd_parser(parser, THIS_MODULE) + extern void deregister_mtd_parser(struct mtd_part_parser *parser); +/* + * module_mtd_part_parser() - Helper macro for MTD partition parsers that don't + * do anything special in module init/exit. Each driver may only use this macro + * once, and calling it replaces module_init() and module_exit(). + */ +#define module_mtd_part_parser(__mtd_part_parser) \ + module_driver(__mtd_part_parser, register_mtd_parser, \ + deregister_mtd_parser) + int mtd_is_partition(const struct mtd_info *mtd); int mtd_add_partition(struct mtd_info *master, const char *name, long long offset, long long length); -- cgit v1.2.3 From b466c1dd73d5303a313fb0c962e4eb5879bc1336 Mon Sep 17 00:00:00 2001 From: Simon Wood Date: Thu, 19 Nov 2015 16:42:14 -0700 Subject: HID: Add vendor specific usage pages for Logitech G920 The Logitech G920 uses a couple of vendor specific usage pages, which results in incorrect number of axis/buttons being detected. This patch adds these pages to the 'ignore' list. Reported-by: Elias Vanderstuyft Signed-off-by: Simon Wood Reviewed-by: Benjamin Tissoires Signed-off-by: Jiri Kosina --- include/linux/hid.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/hid.h b/include/linux/hid.h index 251a1d382e23..a6d7a3fc2cb3 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -168,6 +168,8 @@ struct hid_item { #define HID_UP_MSVENDOR 0xff000000 #define HID_UP_CUSTOM 0x00ff0000 #define HID_UP_LOGIVENDOR 0xffbc0000 +#define HID_UP_LOGIVENDOR2 0xff090000 +#define HID_UP_LOGIVENDOR3 0xff430000 #define HID_UP_LNVENDOR 0xffa00000 #define HID_UP_SENSOR 0x00200000 -- cgit v1.2.3 From 403c5c0650816375527a6feecfb255d9b494dda3 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Thu, 8 Oct 2015 09:11:48 +0200 Subject: HSI: Remove struct hsi_client private fields from kernel-doc The kernel-doc how to says that structure fields that are inside a "private:" area shouldn't be listed in the generated documentation but the private fields for struct hsi_client private are listed. This also fixes the following make htmldocs warnings: .//include/linux/hsi/hsi.h:150: warning: Excess struct/union/enum/typedef member 'e_handler' description in 'hsi_client' .//include/linux/hsi/hsi.h:150: warning: Excess struct/union/enum/typedef member 'pclaimed' description in 'hsi_client' .//include/linux/hsi/hsi.h:150: warning: Excess struct/union/enum/typedef member 'nb' description in 'hsi_client' Signed-off-by: Javier Martinez Canillas Signed-off-by: Sebastian Reichel --- include/linux/hsi/hsi.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/hsi/hsi.h b/include/linux/hsi/hsi.h index 5dd60c2e120f..2790591c77cf 100644 --- a/include/linux/hsi/hsi.h +++ b/include/linux/hsi/hsi.h @@ -135,9 +135,6 @@ static inline int hsi_register_board_info(struct hsi_board_info const *info, * @device: Driver model representation of the device * @tx_cfg: HSI TX configuration * @rx_cfg: HSI RX configuration - * @e_handler: Callback for handling port events (RX Wake High/Low) - * @pclaimed: Keeps tracks if the clients claimed its associated HSI port - * @nb: Notifier block for port events */ struct hsi_client { struct device device; -- cgit v1.2.3 From 9e4808d2c6a6660d5d2cd572e689570df14a8472 Mon Sep 17 00:00:00 2001 From: Thomas Abraham Date: Fri, 20 Nov 2015 16:07:51 +0530 Subject: mfd: sec: Add support for S2MPS15 PMIC Add support for S2MPS15 PMIC which is similar to S2MPS11 PMIC. The S2MPS15 PMIC supports 27 LDO regulators, 10 buck regulators, RTC, three 32.768KHz clock outputs and battery charger. This patch adds initial support for LDO and buck regulators of S2MPS15 device. Signed-off-by: Thomas Abraham Signed-off-by: Alim Akhtar Reviewed-by: Krzysztof Kozlowski [Alim: Added s2mps15_devs like rtc and clk and related changes] Signed-off-by: Lee Jones --- include/linux/mfd/samsung/core.h | 1 + include/linux/mfd/samsung/s2mps15.h | 158 ++++++++++++++++++++++++++++++++++++ 2 files changed, 159 insertions(+) create mode 100644 include/linux/mfd/samsung/s2mps15.h (limited to 'include/linux') diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h index a06098639399..6bc4bcd488ac 100644 --- a/include/linux/mfd/samsung/core.h +++ b/include/linux/mfd/samsung/core.h @@ -44,6 +44,7 @@ enum sec_device_type { S2MPS11X, S2MPS13X, S2MPS14X, + S2MPS15X, S2MPU02, }; diff --git a/include/linux/mfd/samsung/s2mps15.h b/include/linux/mfd/samsung/s2mps15.h new file mode 100644 index 000000000000..36d35287c3c0 --- /dev/null +++ b/include/linux/mfd/samsung/s2mps15.h @@ -0,0 +1,158 @@ +/* + * Copyright (c) 2015 Samsung Electronics Co., Ltd + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_MFD_S2MPS15_H +#define __LINUX_MFD_S2MPS15_H + +/* S2MPS15 registers */ +enum s2mps15_reg { + S2MPS15_REG_ID, + S2MPS15_REG_INT1, + S2MPS15_REG_INT2, + S2MPS15_REG_INT3, + S2MPS15_REG_INT1M, + S2MPS15_REG_INT2M, + S2MPS15_REG_INT3M, + S2MPS15_REG_ST1, + S2MPS15_REG_ST2, + S2MPS15_REG_PWRONSRC, + S2MPS15_REG_OFFSRC, + S2MPS15_REG_BU_CHG, + S2MPS15_REG_RTC_BUF, + S2MPS15_REG_CTRL1, + S2MPS15_REG_CTRL2, + S2MPS15_REG_RSVD1, + S2MPS15_REG_RSVD2, + S2MPS15_REG_RSVD3, + S2MPS15_REG_RSVD4, + S2MPS15_REG_RSVD5, + S2MPS15_REG_RSVD6, + S2MPS15_REG_CTRL3, + S2MPS15_REG_RSVD7, + S2MPS15_REG_RSVD8, + S2MPS15_REG_RSVD9, + S2MPS15_REG_B1CTRL1, + S2MPS15_REG_B1CTRL2, + S2MPS15_REG_B2CTRL1, + S2MPS15_REG_B2CTRL2, + S2MPS15_REG_B3CTRL1, + S2MPS15_REG_B3CTRL2, + S2MPS15_REG_B4CTRL1, + S2MPS15_REG_B4CTRL2, + S2MPS15_REG_B5CTRL1, + S2MPS15_REG_B5CTRL2, + S2MPS15_REG_B6CTRL1, + S2MPS15_REG_B6CTRL2, + S2MPS15_REG_B7CTRL1, + S2MPS15_REG_B7CTRL2, + S2MPS15_REG_B8CTRL1, + S2MPS15_REG_B8CTRL2, + S2MPS15_REG_B9CTRL1, + S2MPS15_REG_B9CTRL2, + S2MPS15_REG_B10CTRL1, + S2MPS15_REG_B10CTRL2, + S2MPS15_REG_BBCTRL1, + S2MPS15_REG_BBCTRL2, + S2MPS15_REG_BRAMP, + S2MPS15_REG_LDODVS1, + S2MPS15_REG_LDODVS2, + S2MPS15_REG_LDODVS3, + S2MPS15_REG_LDODVS4, + S2MPS15_REG_L1CTRL, + S2MPS15_REG_L2CTRL, + S2MPS15_REG_L3CTRL, + S2MPS15_REG_L4CTRL, + S2MPS15_REG_L5CTRL, + S2MPS15_REG_L6CTRL, + S2MPS15_REG_L7CTRL, + S2MPS15_REG_L8CTRL, + S2MPS15_REG_L9CTRL, + S2MPS15_REG_L10CTRL, + S2MPS15_REG_L11CTRL, + S2MPS15_REG_L12CTRL, + S2MPS15_REG_L13CTRL, + S2MPS15_REG_L14CTRL, + S2MPS15_REG_L15CTRL, + S2MPS15_REG_L16CTRL, + S2MPS15_REG_L17CTRL, + S2MPS15_REG_L18CTRL, + S2MPS15_REG_L19CTRL, + S2MPS15_REG_L20CTRL, + S2MPS15_REG_L21CTRL, + S2MPS15_REG_L22CTRL, + S2MPS15_REG_L23CTRL, + S2MPS15_REG_L24CTRL, + S2MPS15_REG_L25CTRL, + S2MPS15_REG_L26CTRL, + S2MPS15_REG_L27CTRL, + S2MPS15_REG_LDODSCH1, + S2MPS15_REG_LDODSCH2, + S2MPS15_REG_LDODSCH3, + S2MPS15_REG_LDODSCH4, +}; + +/* S2MPS15 regulator ids */ +enum s2mps15_regulators { + S2MPS15_LDO1, + S2MPS15_LDO2, + S2MPS15_LDO3, + S2MPS15_LDO4, + S2MPS15_LDO5, + S2MPS15_LDO6, + S2MPS15_LDO7, + S2MPS15_LDO8, + S2MPS15_LDO9, + S2MPS15_LDO10, + S2MPS15_LDO11, + S2MPS15_LDO12, + S2MPS15_LDO13, + S2MPS15_LDO14, + S2MPS15_LDO15, + S2MPS15_LDO16, + S2MPS15_LDO17, + S2MPS15_LDO18, + S2MPS15_LDO19, + S2MPS15_LDO20, + S2MPS15_LDO21, + S2MPS15_LDO22, + S2MPS15_LDO23, + S2MPS15_LDO24, + S2MPS15_LDO25, + S2MPS15_LDO26, + S2MPS15_LDO27, + S2MPS15_BUCK1, + S2MPS15_BUCK2, + S2MPS15_BUCK3, + S2MPS15_BUCK4, + S2MPS15_BUCK5, + S2MPS15_BUCK6, + S2MPS15_BUCK7, + S2MPS15_BUCK8, + S2MPS15_BUCK9, + S2MPS15_BUCK10, + S2MPS15_BUCK11, + S2MPS15_REGULATOR_MAX, +}; + +#define S2MPS15_LDO_VSEL_MASK (0x3F) +#define S2MPS15_BUCK_VSEL_MASK (0xFF) + +#define S2MPS15_ENABLE_SHIFT (0x06) +#define S2MPS15_ENABLE_MASK (0x03 << S2MPS15_ENABLE_SHIFT) + +#define S2MPS15_LDO_N_VOLTAGES (S2MPS15_LDO_VSEL_MASK + 1) +#define S2MPS15_BUCK_N_VOLTAGES (S2MPS15_BUCK_VSEL_MASK + 1) + +#endif /* __LINUX_MFD_S2MPS15_H */ -- cgit v1.2.3 From a65e5efa7c5faa8c320fe56cc351d47fcd006749 Mon Sep 17 00:00:00 2001 From: Alim Akhtar Date: Fri, 20 Nov 2015 16:07:53 +0530 Subject: rtc: s5m.c: Add support for S2MPS15 RTC RTC found in s2mps15 is almost same as one found on s2mps13 with few differences in RTC_UPDATE register fields, like: 1> Bit[4] and Bit[1] are reversed - On s2mps13 WUDR -> bit[4], AUDR -> bit[1] - On s2mps15 WUDR -> bit[1], AUDR -> bit[4] 2> In case of s2mps13, for alarm register, need to set both WDUR and ADUR high, whereas for s2mps15 only set AUDR to high. 3> On s2mps15, WUDR, RUDR and AUDR functions should never be used at the same time. This patch add required changes to enable s2mps15 rtc timer. Signed-off-by: Alim Akhtar Reviewed-by: Krzysztof Kozlowski Acked-by: Alexandre Belloni Signed-off-by: Lee Jones --- include/linux/mfd/samsung/rtc.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/samsung/rtc.h b/include/linux/mfd/samsung/rtc.h index 29c30ac36020..a65e4655d470 100644 --- a/include/linux/mfd/samsung/rtc.h +++ b/include/linux/mfd/samsung/rtc.h @@ -107,6 +107,8 @@ enum s2mps_rtc_reg { #define S2MPS_RTC_WUDR_MASK (1 << S2MPS_RTC_WUDR_SHIFT) #define S2MPS13_RTC_AUDR_SHIFT 1 #define S2MPS13_RTC_AUDR_MASK (1 << S2MPS13_RTC_AUDR_SHIFT) +#define S2MPS15_RTC_WUDR_SHIFT 1 +#define S2MPS15_RTC_WUDR_MASK (1 << S2MPS15_RTC_WUDR_SHIFT) #define S2MPS_RTC_RUDR_SHIFT 0 #define S2MPS_RTC_RUDR_MASK (1 << S2MPS_RTC_RUDR_SHIFT) #define RTC_TCON_SHIFT 1 -- cgit v1.2.3 From 414ca017a54d26c3a58ed1504884e51448d22ae1 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Fri, 20 Nov 2015 10:48:02 -0500 Subject: nfsd4: fix gss-proxy 4.1 mounts for some AD principals The principal name on a gss cred is used to setup the NFSv4.0 callback, which has to have a client principal name to authenticate to. That code wants the name to be in the form servicetype@hostname. rpc.svcgssd passes down such names (and passes down no principal name at all in the case the principal isn't a service principal). gss-proxy always passes down the principal name, and passes it down in the form servicetype/hostname@REALM. So we've been munging the name gss-proxy passes down into the format the NFSv4.0 callback code expects, or throwing away the name if we can't. Since the introduction of the MACH_CRED enforcement in NFSv4.1, we've also been using the principal name to verify that certain operations are done as the same principal as was used on the original EXCHANGE_ID call. For that application, the original name passed down by gss-proxy is also useful. Lack of that name in some cases was causing some kerberized NFSv4.1 mount failures in an Active Directory environment. This fix only works in the gss-proxy case. The fix for legacy rpc.svcgssd would be more involved, and rpc.svcgssd already has other problems in the AD case. Reported-and-tested-by: James Ralston Acked-by: Simo Sorce Signed-off-by: J. Bruce Fields --- include/linux/sunrpc/svcauth.h | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/sunrpc/svcauth.h b/include/linux/sunrpc/svcauth.h index 8d71d6577459..c00f53a4ccdd 100644 --- a/include/linux/sunrpc/svcauth.h +++ b/include/linux/sunrpc/svcauth.h @@ -23,13 +23,19 @@ struct svc_cred { kgid_t cr_gid; struct group_info *cr_group_info; u32 cr_flavor; /* pseudoflavor */ - char *cr_principal; /* for gss */ + /* name of form servicetype/hostname@REALM, passed down by + * gss-proxy: */ + char *cr_raw_principal; + /* name of form servicetype@hostname, passed down by + * rpc.svcgssd, or computed from the above: */ + char *cr_principal; struct gss_api_mech *cr_gss_mech; }; static inline void init_svc_cred(struct svc_cred *cred) { cred->cr_group_info = NULL; + cred->cr_raw_principal = NULL; cred->cr_principal = NULL; cred->cr_gss_mech = NULL; } @@ -38,6 +44,7 @@ static inline void free_svc_cred(struct svc_cred *cred) { if (cred->cr_group_info) put_group_info(cred->cr_group_info); + kfree(cred->cr_raw_principal); kfree(cred->cr_principal); gss_mech_put(cred->cr_gss_mech); init_svc_cred(cred); -- cgit v1.2.3 From c0ea88b890d67cff2667188f14189d8346e89a0f Mon Sep 17 00:00:00 2001 From: Nikita Kiryanov Date: Wed, 25 Nov 2015 13:59:04 +0200 Subject: regulator: tps65218: add support for LS3 current regulator Add support for TPS65218 LS3 current regulator, which is capable of 4 current input limit modes: 100, 200, 500, and 1000 uA. Signed-off-by: Nikita Kiryanov Signed-off-by: Mark Brown --- include/linux/mfd/tps65218.h | 7 ++++++- include/linux/regulator/driver.h | 2 ++ 2 files changed, 8 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mfd/tps65218.h b/include/linux/mfd/tps65218.h index 2f9b593246ee..d58f3b5f585a 100644 --- a/include/linux/mfd/tps65218.h +++ b/include/linux/mfd/tps65218.h @@ -200,6 +200,8 @@ enum tps65218_regulator_id { TPS65218_DCDC_4, TPS65218_DCDC_5, TPS65218_DCDC_6, + /* LS's */ + TPS65218_LS_3, /* LDOs */ TPS65218_LDO_1, }; @@ -210,8 +212,11 @@ enum tps65218_regulator_id { #define TPS65218_NUM_DCDC 6 /* Number of LDO voltage regulators available */ #define TPS65218_NUM_LDO 1 +/* Number of total LS current regulators available */ +#define TPS65218_NUM_LS 1 /* Number of total regulators available */ -#define TPS65218_NUM_REGULATOR (TPS65218_NUM_DCDC + TPS65218_NUM_LDO) +#define TPS65218_NUM_REGULATOR (TPS65218_NUM_DCDC + TPS65218_NUM_LDO \ + + TPS65218_NUM_LS) /* Define the TPS65218 IRQ numbers */ enum tps65218_irqs { diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 9c2903e58adb..16ac9e108806 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -302,6 +302,8 @@ struct regulator_desc { unsigned int vsel_reg; unsigned int vsel_mask; + unsigned int csel_reg; + unsigned int csel_mask; unsigned int apply_reg; unsigned int apply_bit; unsigned int enable_reg; -- cgit v1.2.3 From 749de3dac5e4d65cbed3b58f89c56883e31d1a5a Mon Sep 17 00:00:00 2001 From: Nicola Corna Date: Thu, 29 Oct 2015 12:34:23 +0100 Subject: i2c: add i2c quirk flag for unsupported clock stretching Add I2C_AQ_NO_CLK_STRETCH quirk flag, to be used when clock stretching is not supported. Signed-off-by: Nicola Corna Signed-off-by: Wolfram Sang --- include/linux/i2c.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 768063baafbf..96970024883f 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -493,6 +493,8 @@ struct i2c_adapter_quirks { /* convenience macro for typical write-then read case */ #define I2C_AQ_COMB_WRITE_THEN_READ (I2C_AQ_COMB | I2C_AQ_COMB_WRITE_FIRST | \ I2C_AQ_COMB_READ_SECOND | I2C_AQ_COMB_SAME_ADDR) +/* clock stretching is not supported */ +#define I2C_AQ_NO_CLK_STRETCH BIT(4) /* * i2c_adapter is the structure used to identify a physical i2c bus along -- cgit v1.2.3 From cfa576db834cacc1bb01bc41b2f61a8b578e67c5 Mon Sep 17 00:00:00 2001 From: Nicola Corna Date: Thu, 29 Oct 2015 12:34:26 +0100 Subject: i2c: add i2c_check_quirks helper function This patch adds a i2c_check_quirks helper function to check the quirk flags of an i2c adapter, in a similar way to i2c_check_functionality. Signed-off-by: Nicola Corna Signed-off-by: Wolfram Sang --- include/linux/i2c.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'include/linux') diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 96970024883f..51028f351d13 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -617,6 +617,20 @@ static inline int i2c_check_functionality(struct i2c_adapter *adap, u32 func) return (func & i2c_get_functionality(adap)) == func; } +/** + * i2c_check_quirks() - Function for checking the quirk flags in an i2c adapter + * @adap: i2c adapter + * @quirks: quirk flags + * + * Return: true if the adapter has all the specified quirk flags, false if not + */ +static inline bool i2c_check_quirks(struct i2c_adapter *adap, u64 quirks) +{ + if (!adap->quirks) + return false; + return (adap->quirks->flags & quirks) == quirks; +} + /* Return the adapter number for a specific adapter */ static inline int i2c_adapter_id(struct i2c_adapter *adap) { -- cgit v1.2.3 From 2c81de771f38e54324ede3f24118f4852570b384 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Thu, 26 Nov 2015 09:05:04 +0100 Subject: mtd: spi-nor: include mtd.h header for struct mtd_info definition MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit So far struct spi_nor was using just a pointer to struct mtd_info so it wasn't needed to have it fully defined there. After recent change we embed whole struct so we need to include a proper header. Fixes: 1976367173a4 ("mtd: spi-nor: embed struct mtd_info within struct spi_nor") Signed-off-by: Rafał Miłecki Signed-off-by: Brian Norris --- include/linux/mtd/spi-nor.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index 7bed97471e53..fac3f6f53981 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -12,6 +12,7 @@ #include #include +#include /* * Manufacturer IDs @@ -117,8 +118,6 @@ enum spi_nor_option_flags { SNOR_F_USE_FSR = BIT(0), }; -struct mtd_info; - /** * struct spi_nor - Structure for defining a the SPI NOR layer * @mtd: point to a mtd_info structure -- cgit v1.2.3 From fe7579d6122f2869d00b55842bca9e2a9be51607 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 24 Nov 2015 23:09:02 +0100 Subject: mtd: cfi: don't warn about broken geometry for !CONFIG_MTD The linux/mtd/map.h header file is included by a couple of platform specific files that are built even when CONFIG_MTD is disabled, and we always get warning "No CONFIG_MTD_MAP_BANK_WIDTH_xx selected. No NOR chip support can work" in that case. This adds an #ifdef around the pointless warning, as everything is really fine when we don't build the drivers anyway. Signed-off-by: Arnd Bergmann Signed-off-by: Brian Norris --- include/linux/mtd/map.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mtd/map.h b/include/linux/mtd/map.h index 366cf77953b5..58f3ba709ade 100644 --- a/include/linux/mtd/map.h +++ b/include/linux/mtd/map.h @@ -142,7 +142,9 @@ #endif #ifndef map_bankwidth +#ifdef CONFIG_MTD #warning "No CONFIG_MTD_MAP_BANK_WIDTH_xx selected. No NOR chip support can work" +#endif static inline int map_bankwidth(void *map) { BUG(); -- cgit v1.2.3 From 3b1884c24c98dada51fc4b05735773f0078711d2 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 30 Nov 2015 15:28:06 +0100 Subject: spi: Uninline spi_unregister_device() Uninline spi_unregister_device() in preparation of adding more code to it. Add kerneldoc documentation while we're at it. Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown --- include/linux/spi/spi.h | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index cce80e6dc7d1..075bede66521 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -1115,12 +1115,7 @@ spi_add_device(struct spi_device *spi); extern struct spi_device * spi_new_device(struct spi_master *, struct spi_board_info *); -static inline void -spi_unregister_device(struct spi_device *spi) -{ - if (spi) - device_unregister(&spi->dev); -} +extern void spi_unregister_device(struct spi_device *spi); extern const struct spi_device_id * spi_get_device_id(const struct spi_device *sdev); -- cgit v1.2.3 From de64aa9ec129ba627634088f662a4d09e356ddb6 Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Mon, 23 Nov 2015 11:23:07 +0100 Subject: mtd: nand: fix ONFI parameter page layout src_ssync_features field is only 1 byte large, and the 4th reserved area is actually 8 bytes large. Fixes: d1e1f4e42b5 ("mtd: nand: add support for reading ONFI parameters from NAND device") Signed-off-by: Boris Brezillon Signed-off-by: Brian Norris --- include/linux/mtd/nand.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 056d1650eb89..eaf48b5a95dd 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -276,7 +276,7 @@ struct nand_onfi_params { __le16 t_r; __le16 t_ccs; __le16 src_sync_timing_mode; - __le16 src_ssync_features; + u8 src_ssync_features; __le16 clk_pin_capacitance_typ; __le16 io_pin_capacitance_typ; __le16 input_pin_capacitance_typ; @@ -284,7 +284,7 @@ struct nand_onfi_params { u8 driver_strength_support; __le16 t_int_r; __le16 t_ald; - u8 reserved4[7]; + u8 reserved4[8]; /* vendor */ __le16 vendor_revision; -- cgit v1.2.3 From 74e98be45fe069fcdb00f35eccbb179309ab65cd Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Tue, 1 Dec 2015 11:08:32 -0800 Subject: mtd: nand: fix typo (t_ald -> t_adl) It's "ADL" ("ALE to data loading" time) not "ALD". Signed-off-by: Brian Norris Reviewed-by: Boris Brezillon --- include/linux/mtd/nand.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index eaf48b5a95dd..fad634ea1685 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -283,7 +283,7 @@ struct nand_onfi_params { u8 input_pin_capacitance_max; u8 driver_strength_support; __le16 t_int_r; - __le16 t_ald; + __le16 t_adl; u8 reserved4[8]; /* vendor */ @@ -407,7 +407,7 @@ struct nand_jedec_params { __le16 input_pin_capacitance_typ; __le16 clk_pin_capacitance_typ; u8 driver_strength_support; - __le16 t_ald; + __le16 t_adl; u8 reserved4[36]; /* ECC and endurance block */ -- cgit v1.2.3 From 6fb8ac81cb3125aafc7136f2ef0145da792bab94 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 28 Nov 2015 16:07:10 +0100 Subject: USB: constify usb_mon_operations structure The usb_mon_operations structure is never modified, so declare it as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/hcd.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index f89c24bd53a4..4dcf8446dbcd 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -660,7 +660,7 @@ struct usb_mon_operations { /* void (*urb_unlink)(struct usb_bus *bus, struct urb *urb); */ }; -extern struct usb_mon_operations *mon_ops; +extern const struct usb_mon_operations *mon_ops; static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb) { @@ -682,7 +682,7 @@ static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb, (*mon_ops->urb_complete)(bus, urb, status); } -int usb_mon_register(struct usb_mon_operations *ops); +int usb_mon_register(const struct usb_mon_operations *ops); void usb_mon_deregister(void); #else -- cgit v1.2.3 From bf5ce5bf3cc7136fd7fe5e8999a580bc93a9c8f6 Mon Sep 17 00:00:00 2001 From: Lu Baolu Date: Sat, 14 Nov 2015 16:26:32 +0800 Subject: usb: core: lpm: fix usb3_hardware_lpm sysfs node Commit 655fe4effe0f ("usbcore: add sysfs support to xHCI usb3 hardware LPM") introduced usb3_hardware_lpm sysfs node. This doesn't show the correct status of USB3 U1 and U2 LPM status. This patch fixes this by replacing usb3_hardware_lpm with two nodes, usb3_hardware_lpm_u1 (for U1) and usb3_hardware_lpm_u2 (for U2), and recording the U1/U2 LPM status in right places. This patch should be back-ported to kernels as old as 4.3, that contains Commit 655fe4effe0f ("usbcore: add sysfs support to xHCI usb3 hardware LPM"). Cc: stable@vger.kernel.org Signed-off-by: Lu Baolu Signed-off-by: Greg Kroah-Hartman --- include/linux/usb.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb.h b/include/linux/usb.h index b9a28074210f..b79925dd2b41 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -511,6 +511,8 @@ struct usb3_lpm_parameters { * @usb2_hw_lpm_enabled: USB2 hardware LPM is enabled * @usb2_hw_lpm_allowed: Userspace allows USB 2.0 LPM to be enabled * @usb3_lpm_enabled: USB3 hardware LPM enabled + * @usb3_lpm_u1_enabled: USB3 hardware U1 LPM enabled + * @usb3_lpm_u2_enabled: USB3 hardware U2 LPM enabled * @string_langid: language ID for strings * @product: iProduct string, if present (static) * @manufacturer: iManufacturer string, if present (static) @@ -584,6 +586,8 @@ struct usb_device { unsigned usb2_hw_lpm_enabled:1; unsigned usb2_hw_lpm_allowed:1; unsigned usb3_lpm_enabled:1; + unsigned usb3_lpm_u1_enabled:1; + unsigned usb3_lpm_u2_enabled:1; int string_langid; /* static strings from the device */ -- cgit v1.2.3 From 498378d9d2c12d97318028f1a648d98ee7568430 Mon Sep 17 00:00:00 2001 From: Lu Baolu Date: Sat, 14 Nov 2015 16:26:34 +0800 Subject: usb: core: lpm: remove usb3_lpm_enabled in usb_device Commit 8306095fd2c1 ("USB: Disable USB 3.0 LPM in critical sections.") adds usb3_lpm_enabled member to struct usb_device. There is no reference to this member now. Hence, it could be removed. Signed-off-by: Lu Baolu Signed-off-by: Greg Kroah-Hartman --- include/linux/usb.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb.h b/include/linux/usb.h index b79925dd2b41..89533ba38691 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -510,7 +510,6 @@ struct usb3_lpm_parameters { * @usb2_hw_lpm_besl_capable: device can perform USB2 hardware BESL LPM * @usb2_hw_lpm_enabled: USB2 hardware LPM is enabled * @usb2_hw_lpm_allowed: Userspace allows USB 2.0 LPM to be enabled - * @usb3_lpm_enabled: USB3 hardware LPM enabled * @usb3_lpm_u1_enabled: USB3 hardware U1 LPM enabled * @usb3_lpm_u2_enabled: USB3 hardware U2 LPM enabled * @string_langid: language ID for strings @@ -585,7 +584,6 @@ struct usb_device { unsigned usb2_hw_lpm_besl_capable:1; unsigned usb2_hw_lpm_enabled:1; unsigned usb2_hw_lpm_allowed:1; - unsigned usb3_lpm_enabled:1; unsigned usb3_lpm_u1_enabled:1; unsigned usb3_lpm_u2_enabled:1; int string_langid; -- cgit v1.2.3 From b662f809d41009749a9ee6f9a4db3d9af579e171 Mon Sep 17 00:00:00 2001 From: Daniel Baluta Date: Mon, 9 Nov 2015 09:14:00 +0200 Subject: iio: core: Introduce IIO software triggers A software trigger associates an IIO device trigger with a software interrupt source (e.g: timer, sysfs). This patch adds the generic infrastructure for handling software triggers. Software interrupts sources are kept in a iio_trigger_types_list and registered separately when the associated kernel module is loaded. Software triggers can be created directly from drivers or from user space via configfs interface. To sum up, this dynamically creates "triggers" group to be found under /config/iio/triggers and offers the possibility of dynamically creating trigger types groups. The first supported trigger type is "hrtimer" found under /config/iio/triggers/hrtimer. Signed-off-by: Daniel Baluta Signed-off-by: Jonathan Cameron --- include/linux/iio/sw_trigger.h | 71 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 71 insertions(+) create mode 100644 include/linux/iio/sw_trigger.h (limited to 'include/linux') diff --git a/include/linux/iio/sw_trigger.h b/include/linux/iio/sw_trigger.h new file mode 100644 index 000000000000..c2f33b2b35a5 --- /dev/null +++ b/include/linux/iio/sw_trigger.h @@ -0,0 +1,71 @@ +/* + * Industrial I/O software trigger interface + * + * Copyright (c) 2015 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#ifndef __IIO_SW_TRIGGER +#define __IIO_SW_TRIGGER + +#include +#include +#include +#include + +#define module_iio_sw_trigger_driver(__iio_sw_trigger_type) \ + module_driver(__iio_sw_trigger_type, iio_register_sw_trigger_type, \ + iio_unregister_sw_trigger_type) + +extern struct configfs_subsystem iio_configfs_subsys; +struct iio_sw_trigger_ops; + +struct iio_sw_trigger_type { + const char *name; + struct module *owner; + const struct iio_sw_trigger_ops *ops; + struct list_head list; + struct config_group *group; +}; + +struct iio_sw_trigger { + struct iio_trigger *trigger; + struct iio_sw_trigger_type *trigger_type; + struct config_group group; +}; + +struct iio_sw_trigger_ops { + struct iio_sw_trigger* (*probe)(const char *); + int (*remove)(struct iio_sw_trigger *); +}; + +static inline +struct iio_sw_trigger *to_iio_sw_trigger(struct config_item *item) +{ + return container_of(to_config_group(item), struct iio_sw_trigger, + group); +} + +int iio_register_sw_trigger_type(struct iio_sw_trigger_type *tt); +void iio_unregister_sw_trigger_type(struct iio_sw_trigger_type *tt); + +struct iio_sw_trigger *iio_sw_trigger_create(const char *, const char *); +void iio_sw_trigger_destroy(struct iio_sw_trigger *); + +int iio_sw_trigger_type_configfs_register(struct iio_sw_trigger_type *tt); +void iio_sw_trigger_type_configfs_unregister(struct iio_sw_trigger_type *tt); + +static inline +void iio_swt_group_init_type_name(struct iio_sw_trigger *t, + const char *name, + struct config_item_type *type) +{ +#ifdef CONFIG_CONFIGFS_FS + config_group_init_type_name(&t->group, name, type); +#endif +} + +#endif /* __IIO_SW_TRIGGER */ -- cgit v1.2.3 From b2b018ef48675a9a524fa9791ea7d67fdac405f7 Mon Sep 17 00:00:00 2001 From: Chris J Arges Date: Tue, 1 Dec 2015 20:40:54 -0600 Subject: livepatch: add old_sympos as disambiguator field to klp_func Currently, patching objects with duplicate symbol names fail because the creation of the sysfs function directory collides with the previous attempt. Appending old_addr to the function name is problematic as it reveals the address of the function being patch to a normal user. Using the symbol's occurrence in kallsyms to postfix the function name in the sysfs directory solves the issue of having consistent unique names and ensuring that the address is not exposed to a normal user. In addition, using the symbol position as the user's method to disambiguate symbols instead of addr allows for disambiguating symbols in modules as well for both function addresses and for relocs. This also simplifies much of the code. Special handling for kASLR is no longer needed and can be removed. The klp_find_verify_func_addr function can be replaced by klp_find_object_symbol, and klp_verify_vmlinux_symbol and its callback can be removed completely. In cases of duplicate symbols, old_sympos will be used to disambiguate instead of old_addr. By default old_sympos will be 0, and patching will only succeed if the symbol is unique. Specifying a positive value will ensure that occurrence of the symbol in kallsyms for the patched object will be used for patching if it is valid. In addition, make old_addr an internal structure field not to be specified by the user. Finally, remove klp_find_verify_func_addr as it can be replaced by klp_find_object_symbol directly. Support for symbol position disambiguation for relocations is added in the next patch in this series. Signed-off-by: Chris J Arges Reviewed-by: Petr Mladek Acked-by: Josh Poimboeuf Signed-off-by: Jiri Kosina --- include/linux/livepatch.h | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) (limited to 'include/linux') diff --git a/include/linux/livepatch.h b/include/linux/livepatch.h index 31db7a05dd36..b60e8abab0ab 100644 --- a/include/linux/livepatch.h +++ b/include/linux/livepatch.h @@ -37,8 +37,9 @@ enum klp_state { * struct klp_func - function structure for live patching * @old_name: name of the function to be patched * @new_func: pointer to the patched function code - * @old_addr: a hint conveying at what address the old function - * can be found (optional, vmlinux patches only) + * @old_sympos: a hint indicating which symbol position the old function + * can be found (optional) + * @old_addr: the address of the function being patched * @kobj: kobject for sysfs resources * @state: tracks function-level patch application state * @stack_node: list node for klp_ops func_stack list @@ -48,16 +49,16 @@ struct klp_func { const char *old_name; void *new_func; /* - * The old_addr field is optional and can be used to resolve - * duplicate symbol names in the vmlinux object. If this - * information is not present, the symbol is located by name - * with kallsyms. If the name is not unique and old_addr is - * not provided, the patch application fails as there is no - * way to resolve the ambiguity. + * The old_sympos field is optional and can be used to resolve + * duplicate symbol names in livepatch objects. If this field is zero, + * it is expected the symbol is unique, otherwise patching fails. If + * this value is greater than zero then that occurrence of the symbol + * in kallsyms for the given object is used. */ - unsigned long old_addr; + unsigned long old_sympos; /* internal */ + unsigned long old_addr; struct kobject kobj; enum klp_state state; struct list_head stack_node; -- cgit v1.2.3 From 064c89df6247cd829a7880cc8a87b7ed2cdfccd8 Mon Sep 17 00:00:00 2001 From: Chris J Arges Date: Tue, 1 Dec 2015 20:40:55 -0600 Subject: livepatch: add sympos as disambiguator field to klp_reloc In cases of duplicate symbols, sympos will be used to disambiguate instead of val. By default sympos will be 0, and patching will only succeed if the symbol is unique. Specifying a positive value will ensure that occurrence of the symbol in kallsyms for the patched object will be used for patching if it is valid. For external relocations sympos is not supported. Remove klp_verify_callback, klp_verify_args and klp_verify_vmlinux_symbol as they are no longer used. From the klp_reloc structure remove val, as it can be refactored as a local variable in klp_write_object_relocations. Signed-off-by: Chris J Arges Reviewed-by: Petr Mladek Acked-by: Josh Poimboeuf Signed-off-by: Jiri Kosina --- include/linux/livepatch.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/livepatch.h b/include/linux/livepatch.h index b60e8abab0ab..a8828652f794 100644 --- a/include/linux/livepatch.h +++ b/include/linux/livepatch.h @@ -67,8 +67,7 @@ struct klp_func { /** * struct klp_reloc - relocation structure for live patching * @loc: address where the relocation will be written - * @val: address of the referenced symbol (optional, - * vmlinux patches only) + * @sympos: position in kallsyms to disambiguate symbols (optional) * @type: ELF relocation type * @name: name of the referenced symbol (for lookup/verification) * @addend: offset from the referenced symbol @@ -76,7 +75,7 @@ struct klp_func { */ struct klp_reloc { unsigned long loc; - unsigned long val; + unsigned long sympos; unsigned long type; const char *name; int addend; -- cgit v1.2.3 From ea1f3339909d8973b41f09ef7275d7e49974b910 Mon Sep 17 00:00:00 2001 From: Richard Fitzgerald Date: Tue, 3 Nov 2015 15:08:32 +0000 Subject: mfd: arizona: Support Cirrus Logic CS47L24 and WM1831 This patch adds the regmap configuration tables and core MFD handling for the CS47L24 and WM1831 codecs. Note that compared to the other Arizona codecs, these devices do not have an LDO1 or micsupp regulators, extcon driver, or the DCVDD isolation control. Signed-off-by: Richard Fitzgerald Signed-off-by: Lee Jones --- include/linux/mfd/arizona/core.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/arizona/core.h b/include/linux/mfd/arizona/core.h index 79e607e2f081..d55a42297d49 100644 --- a/include/linux/mfd/arizona/core.h +++ b/include/linux/mfd/arizona/core.h @@ -27,6 +27,8 @@ enum arizona_type { WM8280 = 4, WM8998 = 5, WM1814 = 6, + WM1831 = 7, + CS47L24 = 8, }; #define ARIZONA_IRQ_GP1 0 @@ -166,6 +168,7 @@ static inline int wm5102_patch(struct arizona *arizona) #endif int wm5110_patch(struct arizona *arizona); +int cs47l24_patch(struct arizona *arizona); int wm8997_patch(struct arizona *arizona); int wm8998_patch(struct arizona *arizona); -- cgit v1.2.3 From 7523e4dc5057e157212b4741abd6256e03404cf1 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Thu, 26 Nov 2015 09:44:08 +1030 Subject: module: use a structure to encapsulate layout. Makes it easier to handle init vs core cleanly, though the change is fairly invasive across random architectures. It simplifies the rbtree code immediately, however, while keeping the core data together in the same cachline (now iff the rbtree code is enabled). Acked-by: Peter Zijlstra Reviewed-by: Josh Poimboeuf Signed-off-by: Rusty Russell Signed-off-by: Jiri Kosina --- include/linux/module.h | 64 +++++++++++++++++++++++--------------------------- 1 file changed, 29 insertions(+), 35 deletions(-) (limited to 'include/linux') diff --git a/include/linux/module.h b/include/linux/module.h index 3a19c79918e0..6e68e8cf4d0d 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -302,6 +302,28 @@ struct mod_tree_node { struct latch_tree_node node; }; +struct module_layout { + /* The actual code + data. */ + void *base; + /* Total size. */ + unsigned int size; + /* The size of the executable code. */ + unsigned int text_size; + /* Size of RO section of the module (text+rodata) */ + unsigned int ro_size; + +#ifdef CONFIG_MODULES_TREE_LOOKUP + struct mod_tree_node mtn; +#endif +}; + +#ifdef CONFIG_MODULES_TREE_LOOKUP +/* Only touch one cacheline for common rbtree-for-core-layout case. */ +#define __module_layout_align ____cacheline_aligned +#else +#define __module_layout_align +#endif + struct module { enum module_state state; @@ -366,37 +388,9 @@ struct module { /* Startup function. */ int (*init)(void); - /* - * If this is non-NULL, vfree() after init() returns. - * - * Cacheline align here, such that: - * module_init, module_core, init_size, core_size, - * init_text_size, core_text_size and mtn_core::{mod,node[0]} - * are on the same cacheline. - */ - void *module_init ____cacheline_aligned; - - /* Here is the actual code + data, vfree'd on unload. */ - void *module_core; - - /* Here are the sizes of the init and core sections */ - unsigned int init_size, core_size; - - /* The size of the executable code in each section. */ - unsigned int init_text_size, core_text_size; - -#ifdef CONFIG_MODULES_TREE_LOOKUP - /* - * We want mtn_core::{mod,node[0]} to be in the same cacheline as the - * above entries such that a regular lookup will only touch one - * cacheline. - */ - struct mod_tree_node mtn_core; - struct mod_tree_node mtn_init; -#endif - - /* Size of RO sections of the module (text+rodata) */ - unsigned int init_ro_size, core_ro_size; + /* Core layout: rbtree is accessed frequently, so keep together. */ + struct module_layout core_layout __module_layout_align; + struct module_layout init_layout; /* Arch-specific module values */ struct mod_arch_specific arch; @@ -505,15 +499,15 @@ bool is_module_text_address(unsigned long addr); static inline bool within_module_core(unsigned long addr, const struct module *mod) { - return (unsigned long)mod->module_core <= addr && - addr < (unsigned long)mod->module_core + mod->core_size; + return (unsigned long)mod->core_layout.base <= addr && + addr < (unsigned long)mod->core_layout.base + mod->core_layout.size; } static inline bool within_module_init(unsigned long addr, const struct module *mod) { - return (unsigned long)mod->module_init <= addr && - addr < (unsigned long)mod->module_init + mod->init_size; + return (unsigned long)mod->init_layout.base <= addr && + addr < (unsigned long)mod->init_layout.base + mod->init_layout.size; } static inline bool within_module(unsigned long addr, const struct module *mod) -- cgit v1.2.3 From 85c898db6327353d38f3dd428457384cf81f83f8 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Thu, 26 Nov 2015 09:45:08 +1030 Subject: module: clean up RO/NX handling. Modules have three sections: text, rodata and writable data. The code handled the case where these overlapped, however they never can: debug_align() ensures they are always page-aligned. This is why we got away with manually traversing the pages in set_all_modules_text_rw() without rounding. We create three helper functions: frob_text(), frob_rodata() and frob_writable_data(). We then call these explicitly at every point, so it's clear what we're doing. We also expose module_enable_ro() and module_disable_ro() for livepatch to use. Reviewed-by: Josh Poimboeuf Signed-off-by: Rusty Russell Signed-off-by: Jiri Kosina --- include/linux/module.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/module.h b/include/linux/module.h index 6e68e8cf4d0d..4560d8f1545d 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -762,9 +762,13 @@ extern int module_sysfs_initialized; #ifdef CONFIG_DEBUG_SET_MODULE_RONX extern void set_all_modules_text_rw(void); extern void set_all_modules_text_ro(void); +extern void module_enable_ro(const struct module *mod); +extern void module_disable_ro(const struct module *mod); #else static inline void set_all_modules_text_rw(void) { } static inline void set_all_modules_text_ro(void) { } +static inline void module_enable_ro(const struct module *mod) { } +static inline void module_disable_ro(const struct module *mod) { } #endif #ifdef CONFIG_GENERIC_BUG -- cgit v1.2.3 From 703df6c097956d17a818e63961c82e8e9eef9fef Mon Sep 17 00:00:00 2001 From: "Andrew F. Davis" Date: Mon, 23 Nov 2015 10:53:51 -0600 Subject: power: bq27xxx_battery: Reorganize I2C into a module Separate out I2C functionality into a module. This fixes several small issues and simplifies the driver initialization. Signed-off-by: Andrew F. Davis Signed-off-by: Sebastian Reichel --- include/linux/power/bq27xxx_battery.h | 57 +++++++++++++++++++++++++++++------ 1 file changed, 47 insertions(+), 10 deletions(-) (limited to 'include/linux') diff --git a/include/linux/power/bq27xxx_battery.h b/include/linux/power/bq27xxx_battery.h index 45f6a7b5b3cb..998d8f1c3c91 100644 --- a/include/linux/power/bq27xxx_battery.h +++ b/include/linux/power/bq27xxx_battery.h @@ -1,6 +1,16 @@ #ifndef __LINUX_BQ27X00_BATTERY_H__ #define __LINUX_BQ27X00_BATTERY_H__ +enum bq27xxx_chip { + BQ27000 = 1, /* bq27000, bq27200 */ + BQ27010, /* bq27010, bq27210 */ + BQ27500, /* bq27500, bq27510, bq27520 */ + BQ27530, /* bq27530, bq27531 */ + BQ27541, /* bq27541, bq27542, bq27546, bq27742 */ + BQ27545, /* bq27545 */ + BQ27421, /* bq27421, bq27425, bq27441, bq27621 */ +}; + /** * struct bq27xxx_plaform_data - Platform data for bq27xxx devices * @name: Name of the battery. @@ -12,20 +22,47 @@ * register to be read. The return value should either be the content of * the passed register or an error value. */ -enum bq27xxx_chip { - BQ27000 = 1, /* bq27000, bq27200 */ - BQ27010, /* bq27010, bq27210 */ - BQ27500, /* bq27500, bq27510, bq27520 */ - BQ27530, /* bq27530, bq27531 */ - BQ27541, /* bq27541, bq27542, bq27546, bq27742 */ - BQ27545, /* bq27545 */ - BQ27421, /* bq27421, bq27425, bq27441, bq27621 */ -}; - struct bq27xxx_platform_data { const char *name; enum bq27xxx_chip chip; int (*read)(struct device *dev, unsigned int); }; +struct bq27xxx_device_info; +struct bq27xxx_access_methods { + int (*read)(struct bq27xxx_device_info *di, u8 reg, bool single); +}; + +struct bq27xxx_reg_cache { + int temperature; + int time_to_empty; + int time_to_empty_avg; + int time_to_full; + int charge_full; + int cycle_count; + int capacity; + int energy; + int flags; + int power_avg; + int health; +}; + +struct bq27xxx_device_info { + struct device *dev; + enum bq27xxx_chip chip; + const char *name; + struct bq27xxx_access_methods bus; + struct bq27xxx_reg_cache cache; + int charge_design_full; + unsigned long last_update; + struct delayed_work work; + struct power_supply *bat; + struct mutex lock; + u8 *regs; +}; + +void bq27xxx_battery_update(struct bq27xxx_device_info *di); +int bq27xxx_battery_setup(struct bq27xxx_device_info *di); +void bq27xxx_battery_teardown(struct bq27xxx_device_info *di); + #endif -- cgit v1.2.3 From b1d6ab1aa8cdc23b89bcd578ea8d5e3c501a13d9 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 23 Nov 2015 11:06:43 +0100 Subject: dmaengine: Add might_sleep() to dmaengine_synchronize() Implementations of dmaengine_synchronize() are allowed to sleep, hence the function must not be called to from atomic context. Add might_sleep() to dmaengine_synchronize() to make it easier to detect non-compliant callers. Suggested-by: Andy Shevchenko Signed-off-by: Lars-Peter Clausen Signed-off-by: Vinod Koul --- include/linux/dmaengine.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 4662d9aa6d5a..2f69e1d93f92 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -895,6 +895,8 @@ static inline int dmaengine_terminate_async(struct dma_chan *chan) */ static inline void dmaengine_synchronize(struct dma_chan *chan) { + might_sleep(); + if (chan->device->device_synchronize) chan->device->device_synchronize(chan); } -- cgit v1.2.3 From 8d6c16dd7213fa43702416e3dd1059e9e36bc758 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sat, 5 Dec 2015 16:23:26 +0000 Subject: iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem This exported element needs to be accesible to all drivers using configfs within IIO. Previously it was in the sw_trig.h file which only convered one such usecase. This also fixes a sparse warning as it is now in a header that makes sense to include from industrialio-configfs.c Signed-off-by: Jonathan Cameron < jic23@kernel.org> --- include/linux/iio/configfs.h | 15 +++++++++++++++ include/linux/iio/sw_trigger.h | 1 - 2 files changed, 15 insertions(+), 1 deletion(-) create mode 100644 include/linux/iio/configfs.h (limited to 'include/linux') diff --git a/include/linux/iio/configfs.h b/include/linux/iio/configfs.h new file mode 100644 index 000000000000..93befd67c15c --- /dev/null +++ b/include/linux/iio/configfs.h @@ -0,0 +1,15 @@ +/* + * Industrial I/O configfs support + * + * Copyright (c) 2015 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#ifndef __IIO_CONFIGFS +#define __IIO_CONFIGFS + +extern struct configfs_subsystem iio_configfs_subsys; + +#endif /* __IIO_CONFIGFS */ diff --git a/include/linux/iio/sw_trigger.h b/include/linux/iio/sw_trigger.h index c2f33b2b35a5..5198f8ed08a4 100644 --- a/include/linux/iio/sw_trigger.h +++ b/include/linux/iio/sw_trigger.h @@ -20,7 +20,6 @@ module_driver(__iio_sw_trigger_type, iio_register_sw_trigger_type, \ iio_unregister_sw_trigger_type) -extern struct configfs_subsystem iio_configfs_subsys; struct iio_sw_trigger_ops; struct iio_sw_trigger_type { -- cgit v1.2.3 From ed4f85c03cc7460a2f76afb73c22b8894b44ee20 Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Tue, 1 Dec 2015 12:03:06 +0100 Subject: mtd: nand: embed an mtd_info structure into nand_chip Currently all NAND controller drivers are providing both the mtd_info and nand_chip struct and then let the NAND subsystem to initialize a few things before registering the mtd instance to the MTD layer. Embed an mtd_info field into nand_chip to add some consistency to all NAND controller drivers. This change will also help factorizing boilerplate code copied in all NAND drivers. Signed-off-by: Boris Brezillon Signed-off-by: Brian Norris --- include/linux/mtd/nand.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index fad634ea1685..d6710575ddb6 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -540,6 +540,7 @@ struct nand_buffers { /** * struct nand_chip - NAND Private Flash Chip Data + * @mtd: MTD device registered to the MTD framework * @IO_ADDR_R: [BOARDSPECIFIC] address to read the 8 I/O lines of the * flash device * @IO_ADDR_W: [BOARDSPECIFIC] address to write the 8 I/O lines of the @@ -640,6 +641,7 @@ struct nand_buffers { */ struct nand_chip { + struct mtd_info mtd; void __iomem *IO_ADDR_R; void __iomem *IO_ADDR_W; -- cgit v1.2.3 From ffd014f43fdcb6edb5a7f302de1e717e8c0673d5 Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Tue, 1 Dec 2015 12:03:07 +0100 Subject: mtd: nand: add nand_to_mtd() helper Add a new helper to retrieve the MTD device attached to a NAND chip. Signed-off-by: Boris Brezillon Signed-off-by: Brian Norris --- include/linux/mtd/nand.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index d6710575ddb6..b614ed2105ac 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -737,6 +737,11 @@ static inline struct nand_chip *mtd_to_nand(struct mtd_info *mtd) return mtd->priv; } +static inline struct mtd_info *nand_to_mtd(struct nand_chip *chip) +{ + return &chip->mtd; +} + /* * NAND Flash Manufacturer ID Codes */ -- cgit v1.2.3 From b9adf469f8abb8a66f5795bbd8fe50fe201a14a1 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Fri, 4 Dec 2015 15:25:14 -0800 Subject: mtd: partitions: make parsers return 'const' partition arrays We only want to modify these arrays inside the parser "drivers", so the drivers should construct them however they like, then return them as immutable arrays. This will make other refactorings easier. Signed-off-by: Brian Norris Reviewed-by: Boris Brezillon --- include/linux/mtd/partitions.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h index d002d9b5d797..6185536daacc 100644 --- a/include/linux/mtd/partitions.h +++ b/include/linux/mtd/partitions.h @@ -69,7 +69,7 @@ struct mtd_part_parser { struct list_head list; struct module *owner; const char *name; - int (*parse_fn)(struct mtd_info *, struct mtd_partition **, + int (*parse_fn)(struct mtd_info *, const struct mtd_partition **, struct mtd_part_parser_data *); }; -- cgit v1.2.3 From 07fd2f871c5e3dfb8ff5eb9c4b44fdb4cf1aeff5 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Fri, 4 Dec 2015 15:25:17 -0800 Subject: mtd: partitions: pass around 'mtd_partitions' wrapper struct For some of the core partitioning code, it helps to keep info about the parsed partition (and who parsed them) together in one place. Signed-off-by: Brian Norris --- include/linux/mtd/partitions.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h index 6185536daacc..cceaf7bd1537 100644 --- a/include/linux/mtd/partitions.h +++ b/include/linux/mtd/partitions.h @@ -73,6 +73,13 @@ struct mtd_part_parser { struct mtd_part_parser_data *); }; +/* Container for passing around a set of parsed partitions */ +struct mtd_partitions { + const struct mtd_partition *parts; + int nr_parts; + const struct mtd_part_parser *parser; +}; + extern int __register_mtd_parser(struct mtd_part_parser *parser, struct module *owner); #define register_mtd_parser(parser) __register_mtd_parser(parser, THIS_MODULE) -- cgit v1.2.3 From adc83bf8896353603213754353dd66dae69e3d7f Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Wed, 9 Dec 2015 10:24:03 -0800 Subject: mtd: partitions: support a cleanup callback for parsers If partition parsers need to clean up their resources, we shouldn't assume that all memory will fit in a single kmalloc() that the caller can kfree(). We should allow the parser to provide a proper cleanup routine. Note that this means we need to keep a hold on the parser's module for a bit longer, and release it later with mtd_part_parser_put(). Alongside this, define a default callback that we'll automatically use if the parser doesn't provide one, so we can still retain the old behavior. Signed-off-by: Brian Norris Reviewed-by: Boris Brezillon --- include/linux/mtd/partitions.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h index cceaf7bd1537..70736e1e6c8f 100644 --- a/include/linux/mtd/partitions.h +++ b/include/linux/mtd/partitions.h @@ -71,6 +71,7 @@ struct mtd_part_parser { const char *name; int (*parse_fn)(struct mtd_info *, const struct mtd_partition **, struct mtd_part_parser_data *); + void (*cleanup)(const struct mtd_partition *pparts, int nr_parts); }; /* Container for passing around a set of parsed partitions */ -- cgit v1.2.3 From 4d42e95fc789393d267bbab8b4684936c1529378 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 4 Dec 2015 16:56:29 +0100 Subject: dmaengine: sh: Remove unused R-Car HPB-DMAC driver As of commit 4baadb9e05c68962 ("ARM: shmobile: r8a7778: remove obsolete setup code"), the Renesas R-Car HPB-DMAC driver is no longer used. In theory it could still be used on R-Car Gen1 SoCs, but that requires adding DT support to the driver, which is not planned. Remove the driver, it can be resurrected from git history when needed. Signed-off-by: Geert Uytterhoeven Acked-by: Simon Horman Signed-off-by: Vinod Koul --- include/linux/platform_data/dma-rcar-hpbdma.h | 103 -------------------------- 1 file changed, 103 deletions(-) delete mode 100644 include/linux/platform_data/dma-rcar-hpbdma.h (limited to 'include/linux') diff --git a/include/linux/platform_data/dma-rcar-hpbdma.h b/include/linux/platform_data/dma-rcar-hpbdma.h deleted file mode 100644 index 648b8ea61a22..000000000000 --- a/include/linux/platform_data/dma-rcar-hpbdma.h +++ /dev/null @@ -1,103 +0,0 @@ -/* - * Copyright (C) 2011-2013 Renesas Electronics Corporation - * Copyright (C) 2013 Cogent Embedded, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - */ - -#ifndef __DMA_RCAR_HPBDMA_H -#define __DMA_RCAR_HPBDMA_H - -#include -#include - -/* Transmit sizes and respective register values */ -enum { - XMIT_SZ_8BIT = 0, - XMIT_SZ_16BIT = 1, - XMIT_SZ_32BIT = 2, - XMIT_SZ_MAX -}; - -/* DMA control register (DCR) bits */ -#define HPB_DMAE_DCR_DTAMD (1u << 26) -#define HPB_DMAE_DCR_DTAC (1u << 25) -#define HPB_DMAE_DCR_DTAU (1u << 24) -#define HPB_DMAE_DCR_DTAU1 (1u << 23) -#define HPB_DMAE_DCR_SWMD (1u << 22) -#define HPB_DMAE_DCR_BTMD (1u << 21) -#define HPB_DMAE_DCR_PKMD (1u << 20) -#define HPB_DMAE_DCR_CT (1u << 18) -#define HPB_DMAE_DCR_ACMD (1u << 17) -#define HPB_DMAE_DCR_DIP (1u << 16) -#define HPB_DMAE_DCR_SMDL (1u << 13) -#define HPB_DMAE_DCR_SPDAM (1u << 12) -#define HPB_DMAE_DCR_SDRMD_MASK (3u << 10) -#define HPB_DMAE_DCR_SDRMD_MOD (0u << 10) -#define HPB_DMAE_DCR_SDRMD_AUTO (1u << 10) -#define HPB_DMAE_DCR_SDRMD_TIMER (2u << 10) -#define HPB_DMAE_DCR_SPDS_MASK (3u << 8) -#define HPB_DMAE_DCR_SPDS_8BIT (0u << 8) -#define HPB_DMAE_DCR_SPDS_16BIT (1u << 8) -#define HPB_DMAE_DCR_SPDS_32BIT (2u << 8) -#define HPB_DMAE_DCR_DMDL (1u << 5) -#define HPB_DMAE_DCR_DPDAM (1u << 4) -#define HPB_DMAE_DCR_DDRMD_MASK (3u << 2) -#define HPB_DMAE_DCR_DDRMD_MOD (0u << 2) -#define HPB_DMAE_DCR_DDRMD_AUTO (1u << 2) -#define HPB_DMAE_DCR_DDRMD_TIMER (2u << 2) -#define HPB_DMAE_DCR_DPDS_MASK (3u << 0) -#define HPB_DMAE_DCR_DPDS_8BIT (0u << 0) -#define HPB_DMAE_DCR_DPDS_16BIT (1u << 0) -#define HPB_DMAE_DCR_DPDS_32BIT (2u << 0) - -/* Asynchronous reset register (ASYNCRSTR) bits */ -#define HPB_DMAE_ASYNCRSTR_ASRST41 BIT(10) -#define HPB_DMAE_ASYNCRSTR_ASRST40 BIT(9) -#define HPB_DMAE_ASYNCRSTR_ASRST39 BIT(8) -#define HPB_DMAE_ASYNCRSTR_ASRST27 BIT(7) -#define HPB_DMAE_ASYNCRSTR_ASRST26 BIT(6) -#define HPB_DMAE_ASYNCRSTR_ASRST25 BIT(5) -#define HPB_DMAE_ASYNCRSTR_ASRST24 BIT(4) -#define HPB_DMAE_ASYNCRSTR_ASRST23 BIT(3) -#define HPB_DMAE_ASYNCRSTR_ASRST22 BIT(2) -#define HPB_DMAE_ASYNCRSTR_ASRST21 BIT(1) -#define HPB_DMAE_ASYNCRSTR_ASRST20 BIT(0) - -struct hpb_dmae_slave_config { - unsigned int id; - dma_addr_t addr; - u32 dcr; - u32 port; - u32 rstr; - u32 mdr; - u32 mdm; - u32 flags; -#define HPB_DMAE_SET_ASYNC_RESET BIT(0) -#define HPB_DMAE_SET_ASYNC_MODE BIT(1) - u32 dma_ch; -}; - -#define HPB_DMAE_CHANNEL(_irq, _s_id) \ -{ \ - .ch_irq = _irq, \ - .s_id = _s_id, \ -} - -struct hpb_dmae_channel { - unsigned int ch_irq; - unsigned int s_id; -}; - -struct hpb_dmae_pdata { - const struct hpb_dmae_slave_config *slaves; - int num_slaves; - const struct hpb_dmae_channel *channels; - int num_channels; - const unsigned int ts_shift[XMIT_SZ_MAX]; - int num_hw_channels; -}; - -#endif -- cgit v1.2.3 From 49ddedf3bfcb59a562c7db0e50aecd1422e9cdc9 Mon Sep 17 00:00:00 2001 From: Martin Sperl Date: Fri, 27 Nov 2015 13:56:03 +0000 Subject: spi: add spi_message_init_no_memset to avoid zeroing the spi_message In the spi_loopback_test driver there is the need to initialize a spi_message that is filled with values from a static structure. Applying spi_message_init to such a prefilled structure results in all the settings getting reset to zero, which is not what we want. Copying each field of spi_message separately instead always includes the risk that some new fields have not been implemented in the copying code. So here we introduce a version of spi_message_init called spi_message_init_no_memset that does not fill the structure with zero first, but only initializes the relevant list_heads. Signed-off-by: Martin Sperl Signed-off-by: Mark Brown --- include/linux/spi/spi.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index cce80e6dc7d1..4c54d4744107 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -762,10 +762,15 @@ struct spi_message { void *state; }; +static inline void spi_message_init_no_memset(struct spi_message *m) +{ + INIT_LIST_HEAD(&m->transfers); +} + static inline void spi_message_init(struct spi_message *m) { memset(m, 0, sizeof *m); - INIT_LIST_HEAD(&m->transfers); + spi_message_init_no_memset(m); } static inline void -- cgit v1.2.3 From bd94c4077a0b2ecc35562c294f80f3659ecd8499 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Wed, 28 Oct 2015 12:46:05 +0900 Subject: serial: support 16-bit register interface for console Currently, 8-bit (MMIO) and 32-bit (MMIO32) register interfaces are supported for the 8250 console, but the 16-bit (MMIO16) is not. The 8250 UART device on my board is connected to a 16-bit bus and my main motivation is to use earlycon with it. (Refer to arch/arm/boot/dts/uniphier-support-card.dtsi) Signed-off-by: Masahiro Yamada Reviewed-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- include/linux/serial_core.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 297d4fa1cfe5..35aa87b96b71 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -150,6 +150,7 @@ struct uart_port { #define UPIO_AU (SERIAL_IO_AU) /* Au1x00 and RT288x type IO */ #define UPIO_TSI (SERIAL_IO_TSI) /* Tsi108/109 type IO */ #define UPIO_MEM32BE (SERIAL_IO_MEM32BE) /* 32b big endian */ +#define UPIO_MEM16 (SERIAL_IO_MEM16) /* 16b little endian */ unsigned int read_status_mask; /* driver specific */ unsigned int ignore_status_mask; /* driver specific */ -- cgit v1.2.3 From 998b4a4571b87eb6795863e07683fa5d4e0398ba Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sun, 8 Nov 2015 13:01:08 -0500 Subject: tty: Improve tty_debug() macro Incorporate suggestions for tty core debug macro improvements - printk(KERN_DEBUG) => pr_debug() - ##args => ##__VA_ARGS__ - remove do {} while() - output tty_name() first cc: Joe Perches Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- include/linux/tty.h | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/tty.h b/include/linux/tty.h index 5e31f1b99037..3695c884258a 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -667,10 +667,7 @@ static inline void proc_tty_register_driver(struct tty_driver *d) {} static inline void proc_tty_unregister_driver(struct tty_driver *d) {} #endif -#define tty_debug(tty, f, args...) \ - do { \ - printk(KERN_DEBUG "%s: %s: " f, __func__, \ - tty_name(tty), ##args); \ - } while (0) +#define tty_debug(tty, f, ...) \ + pr_debug("%s: %s: " f, tty_name(tty), __func__, ##__VA_ARGS__) #endif -- cgit v1.2.3 From 82b8f888e99c81c609710901d8defbc8eff13f79 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sun, 8 Nov 2015 13:01:09 -0500 Subject: tty: Make tty_paranoia_check() file scope tty_paranoia_check() is only used within drivers/tty/tty_io.c; remove extern declaration in header and limit symbol to file scope. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- include/linux/tty.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/tty.h b/include/linux/tty.h index 3695c884258a..0532465ea142 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -419,8 +419,6 @@ static inline struct tty_struct *tty_kref_get(struct tty_struct *tty) return tty; } -extern int tty_paranoia_check(struct tty_struct *tty, struct inode *inode, - const char *routine); extern const char *tty_name(const struct tty_struct *tty); extern void tty_wait_until_sent(struct tty_struct *tty, long timeout); extern int __tty_check_change(struct tty_struct *tty, int sig); -- cgit v1.2.3 From 0a083eddae33b6e20234d05a9cf54f87b0095511 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sun, 8 Nov 2015 13:01:12 -0500 Subject: tty: core: Add helper fn to deref tty driver name Similar to tty_name(), add tty_driver_name() helper to safely dereference tty->driver->name (otherwise return empty string). Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- include/linux/tty.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/tty.h b/include/linux/tty.h index 0532465ea142..a9c1af990da9 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -420,6 +420,7 @@ static inline struct tty_struct *tty_kref_get(struct tty_struct *tty) } extern const char *tty_name(const struct tty_struct *tty); +extern const char *tty_driver_name(const struct tty_struct *tty); extern void tty_wait_until_sent(struct tty_struct *tty, long timeout); extern int __tty_check_change(struct tty_struct *tty, int sig); extern int tty_check_change(struct tty_struct *tty); -- cgit v1.2.3 From 339f36ba14cf9f8fcf6e6b78385bd6811ec59fbe Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sun, 8 Nov 2015 13:01:13 -0500 Subject: tty: Define tty_*() printk macros Since not all ttys are devices (eg., SysV ptys), dev_*() printk macros cannot be used. Define tty_*() printk macros that output in similar format to dev_*() macros (ie., : .....). Transform the most-trivial printk( LEVEL ...) usage to tty_*() usage. NB: The function name has been eliminated from messages with unique context, or prefixed to the format when given. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- include/linux/tty.h | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/tty.h b/include/linux/tty.h index a9c1af990da9..f578e8405ff0 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -666,7 +666,17 @@ static inline void proc_tty_register_driver(struct tty_driver *d) {} static inline void proc_tty_unregister_driver(struct tty_driver *d) {} #endif +#define tty_msg(fn, tty, f, ...) \ + fn("%s %s: " f, tty_driver_name(tty), tty_name(tty), ##__VA_ARGS__) + #define tty_debug(tty, f, ...) \ - pr_debug("%s: %s: " f, tty_name(tty), __func__, ##__VA_ARGS__) + tty_msg(pr_debug, tty, "%s:" f, __func__, ##__VA_ARGS__) +#define tty_info(tty, f, ...) tty_msg(pr_info, tty, f, ##__VA_ARGS__) +#define tty_notice(tty, f, ...) tty_msg(pr_notice, tty, f, ##__VA_ARGS__) +#define tty_warn(tty, f, ...) tty_msg(pr_warn, tty, f, ##__VA_ARGS__) +#define tty_err(tty, f, ...) tty_msg(pr_err, tty, f, ##__VA_ARGS__) + +#define tty_info_ratelimited(tty, f, ...) \ + tty_msg(pr_info_ratelimited, tty, f, ##__VA_ARGS__) #endif -- cgit v1.2.3 From d435cefe9cbc9308cac8d4b19069a572e2bd1558 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sun, 8 Nov 2015 13:01:19 -0500 Subject: tty: Remove __func__ from tty_debug() macro Now that tty_debug() macro uses pr_debug(), the function name can be printed when using dynamic debug; printing the function name within the format string is redundant. Remove the __func__ parameter and print specifier from the format string. Add context to messages for when the function name is not printed by dynamic debug, or when dynamic debug is not enabled. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- include/linux/tty.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/tty.h b/include/linux/tty.h index f578e8405ff0..f06dd7a41a03 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -669,8 +669,7 @@ static inline void proc_tty_unregister_driver(struct tty_driver *d) {} #define tty_msg(fn, tty, f, ...) \ fn("%s %s: " f, tty_driver_name(tty), tty_name(tty), ##__VA_ARGS__) -#define tty_debug(tty, f, ...) \ - tty_msg(pr_debug, tty, "%s:" f, __func__, ##__VA_ARGS__) +#define tty_debug(tty, f, ...) tty_msg(pr_debug, tty, f, ##__VA_ARGS__) #define tty_info(tty, f, ...) tty_msg(pr_info, tty, f, ##__VA_ARGS__) #define tty_notice(tty, f, ...) tty_msg(pr_notice, tty, f, ##__VA_ARGS__) #define tty_warn(tty, f, ...) tty_msg(pr_warn, tty, f, ##__VA_ARGS__) -- cgit v1.2.3 From 4de91ebcc788f81d2a974d91208f5560ddf36378 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sun, 8 Nov 2015 09:18:31 -0500 Subject: tty: Remove dead tty_write_flush() declaration and macro tty_write_flush() has no definition and the TTY_WRITE_FLUSH() macro is never invoked; remove. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- include/linux/tty.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/tty.h b/include/linux/tty.h index f06dd7a41a03..2fd8708ea888 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -345,8 +345,6 @@ struct tty_file_private { #define TTY_HUPPED 18 /* Post driver->hangup() */ #define TTY_LDISC_HALTED 22 /* Line discipline is halted */ -#define TTY_WRITE_FLUSH(tty) tty_write_flush((tty)) - /* Values for tty->flow_change */ #define TTY_THROTTLE_SAFE 1 #define TTY_UNTHROTTLE_SAFE 2 @@ -395,8 +393,6 @@ static inline int __init tty_init(void) { return 0; } #endif -extern void tty_write_flush(struct tty_struct *); - extern struct ktermios tty_std_termios; extern int vcs_init(void); -- cgit v1.2.3 From d1b5c87fa8058a3f477ae05555916dd1cea934ad Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 16 Nov 2015 16:48:12 +0100 Subject: serial: remove NWP serial support The NWP serial driver is no longer needed, as the two users of this hardware have migrated to a much faster generation hardware, see https://en.wikipedia.org/wiki/QPACE2 for the replacement. Signed-off-by: Arnd Bergmann Cc: Benjamin Krill Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Greg Kroah-Hartman --- include/linux/nwpserial.h | 18 ------------------ 1 file changed, 18 deletions(-) delete mode 100644 include/linux/nwpserial.h (limited to 'include/linux') diff --git a/include/linux/nwpserial.h b/include/linux/nwpserial.h deleted file mode 100644 index 9acb21572eaf..000000000000 --- a/include/linux/nwpserial.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Serial Port driver for a NWP uart device - * - * Copyright (C) 2008 IBM Corp., Benjamin Krill - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ -#ifndef _NWPSERIAL_H -#define _NWPSERIAL_H - -int nwpserial_register_port(struct uart_port *port); -void nwpserial_unregister_port(int line); - -#endif /* _NWPSERIAL_H */ -- cgit v1.2.3 From 7ec758718920e5e5876d0d02ece6855128c8eb1e Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 16 Nov 2015 17:40:57 +0000 Subject: tty: amba-pl011: add support for ZTE UART (EXPERIMENTAL) Add (incomplete) support for the ZTE UART to the AMBA PL011 driver. This is similar to the ARM and ST variants, except it has a different register address layout, and requires 32-bit accesses to the registers. Use the newly introduced register tables and access size support to cope with these differences. Signed-off-by: Russell King Reviewed-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- include/linux/amba/serial.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'include/linux') diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h index 0ddb5c02ad8b..d76a19ba2cff 100644 --- a/include/linux/amba/serial.h +++ b/include/linux/amba/serial.h @@ -65,6 +65,24 @@ #define ST_UART011_ABCR 0x100 /* Autobaud control register. */ #define ST_UART011_ABIMSC 0x15C /* Autobaud interrupt mask/clear register. */ +/* + * ZTE UART register offsets. This UART has a radically different address + * allocation from the ARM and ST variants, so we list all registers here. + * We assume unlisted registers do not exist. + */ +#define ZX_UART011_DR 0x04 +#define ZX_UART011_FR 0x14 +#define ZX_UART011_IBRD 0x24 +#define ZX_UART011_FBRD 0x28 +#define ZX_UART011_LCRH 0x30 +#define ZX_UART011_CR 0x34 +#define ZX_UART011_IFLS 0x38 +#define ZX_UART011_IMSC 0x40 +#define ZX_UART011_RIS 0x44 +#define ZX_UART011_MIS 0x48 +#define ZX_UART011_ICR 0x4c +#define ZX_UART011_DMACR 0x50 + #define UART011_DR_OE (1 << 11) #define UART011_DR_BE (1 << 10) #define UART011_DR_PE (1 << 9) -- cgit v1.2.3 From 858965d909db32fb567a06916bbebdb8951cd39e Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Fri, 27 Nov 2015 21:29:24 -0500 Subject: serial: Fix UPIO_MEM comment The original semantics of UPIO_MEM did not include the notion of bitness and endianness; different drivers used UPIO_MEM to refer to their original mmio bitness/endianness. For example, for the 8250 driver this is 8-bit LE but for the amba-pl011 driver this is 16-bit LE. Since UPIO_* values are userspace ABI via TIOCGSERIAL/TIOCSSERIAL ioctls, the original meaning of UPIIO_MEM must remain as it was: the original mmio stride/width/endianness of the driver. Signed-off-by: Peter Hurley Acked-by: Timur Tabi Signed-off-by: Greg Kroah-Hartman --- include/linux/serial_core.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 35aa87b96b71..e03d6ba5e5b4 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -145,7 +145,7 @@ struct uart_port { #define UPIO_PORT (SERIAL_IO_PORT) /* 8b I/O port access */ #define UPIO_HUB6 (SERIAL_IO_HUB6) /* Hub6 ISA card */ -#define UPIO_MEM (SERIAL_IO_MEM) /* 8b MMIO access */ +#define UPIO_MEM (SERIAL_IO_MEM) /* driver-specific */ #define UPIO_MEM32 (SERIAL_IO_MEM32) /* 32b little endian */ #define UPIO_AU (SERIAL_IO_AU) /* Au1x00 and RT288x type IO */ #define UPIO_TSI (SERIAL_IO_TSI) /* Tsi108/109 type IO */ -- cgit v1.2.3 From e1dba01ca620bb0b3864d5237c1c597d9e012ebf Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 8 Dec 2015 10:37:46 +0100 Subject: i2c: add generic routine to parse DT for timing information Inspired from the i2c-rk3x driver (thanks guys!) but refactored and extended. See built-in docs for further information. Signed-off-by: Wolfram Sang Reviewed-by: Mika Westerberg Signed-off-by: Wolfram Sang --- include/linux/i2c.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'include/linux') diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 51028f351d13..bc2b19ad9357 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -413,6 +413,22 @@ struct i2c_algorithm { #endif }; +/** + * struct i2c_timings - I2C timing information + * @bus_freq_hz: the bus frequency in Hz + * @scl_rise_ns: time SCL signal takes to rise in ns; t(r) in the I2C specification + * @scl_fall_ns: time SCL signal takes to fall in ns; t(f) in the I2C specification + * @scl_int_delay_ns: time IP core additionally needs to setup SCL in ns + * @sda_fall_ns: time SDA signal takes to fall in ns; t(f) in the I2C specification + */ +struct i2c_timings { + u32 bus_freq_hz; + u32 scl_rise_ns; + u32 scl_fall_ns; + u32 scl_int_delay_ns; + u32 sda_fall_ns; +}; + /** * struct i2c_bus_recovery_info - I2C bus recovery information * @recover_bus: Recover routine. Either pass driver's recover_bus() routine, or @@ -604,6 +620,7 @@ extern void i2c_clients_command(struct i2c_adapter *adap, extern struct i2c_adapter *i2c_get_adapter(int nr); extern void i2c_put_adapter(struct i2c_adapter *adap); +void i2c_parse_fw_timings(struct device *dev, struct i2c_timings *t, bool use_defaults); /* Return the functionality mask */ static inline u32 i2c_get_functionality(struct i2c_adapter *adap) @@ -660,6 +677,7 @@ extern struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node *node) /* must call i2c_put_adapter() when done with returned i2c_adapter device */ struct i2c_adapter *of_get_i2c_adapter_by_node(struct device_node *node); + #else static inline struct i2c_client *of_find_i2c_device_by_node(struct device_node *node) -- cgit v1.2.3 From 665d2c2848f14c0c2a2e89192bde9073c4d352f7 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Tue, 8 Dec 2015 17:04:59 -0800 Subject: mtd: bcm47xxnflash: really unregister NAND on device removal MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The field bcma_nflash::mtd is never set to be non-zero anywhere, but we test for it in the removal path. So the MTD is never unregistered. Also, we should use nand_release(), not mtd_device_unregister(). Finally, we don't need to use the 'platdata' for stashing/retrieving our *driver* data -- that's what *_{get,set}_drvdata() are for. So, kill off bcm_nflash::mtd, and stash the struct bcm47xxnflash in drvdata instead. Also move the forward declaration of mtd_info up a bit, since struct bcma_sflash should be using it. Caught while inspecting other changes being made to this driver. Compile tested only. Signed-off-by: Brian Norris Cc: "Rafał Miłecki" Cc: linux-wireless@vger.kernel.org Acked-by: Boris Brezillon --- include/linux/bcma/bcma_driver_chipcommon.h | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index cf038431a5cc..db51a6ffb7d6 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -579,6 +579,8 @@ struct bcma_pflash { }; #ifdef CONFIG_BCMA_SFLASH +struct mtd_info; + struct bcma_sflash { bool present; u32 window; @@ -592,13 +594,9 @@ struct bcma_sflash { #endif #ifdef CONFIG_BCMA_NFLASH -struct mtd_info; - struct bcma_nflash { bool present; bool boot; /* This is the flash the SoC boots from */ - - struct mtd_info *mtd; }; #endif -- cgit v1.2.3 From a11fac3776fc4db6a9fa1104b1d0477809c677e0 Mon Sep 17 00:00:00 2001 From: Jaegeuk Kim Date: Mon, 14 Dec 2015 18:58:42 -0800 Subject: f2fs: add symbol to avoid any confusion with tools This patch adds MAX_VOLUME_NAME to sync with f2fs-tools. Signed-off-by: Jaegeuk Kim --- include/linux/f2fs_fs.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/f2fs_fs.h b/include/linux/f2fs_fs.h index 25c6324a0dd0..e59c3be92106 100644 --- a/include/linux/f2fs_fs.h +++ b/include/linux/f2fs_fs.h @@ -51,6 +51,7 @@ #define MAX_ACTIVE_DATA_LOGS 8 #define VERSION_LEN 256 +#define MAX_VOLUME_NAME 512 /* * For superblock @@ -84,7 +85,7 @@ struct f2fs_super_block { __le32 node_ino; /* node inode number */ __le32 meta_ino; /* meta inode number */ __u8 uuid[16]; /* 128-bit uuid for volume */ - __le16 volume_name[512]; /* volume name */ + __le16 volume_name[MAX_VOLUME_NAME]; /* volume name */ __le32 extension_count; /* # of extensions below */ __u8 extension_list[F2FS_MAX_EXTENSION][8]; /* extension array */ __le32 cp_payload; -- cgit v1.2.3 From 619848bd074343ff2bdeeafca0be39748f6da372 Mon Sep 17 00:00:00 2001 From: Jake Oshins Date: Mon, 14 Dec 2015 16:01:39 -0800 Subject: drivers:hv: Export a function that maps Linux CPU num onto Hyper-V proc num This patch exposes the mapping between Linux CPU number and Hyper-V virtual processor number. This is necessary because the hypervisor needs to know which virtual processors to target when making a mapping in the Interrupt Redirection Table in the I/O MMU. Signed-off-by: Jake Oshins Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- include/linux/hyperv.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index 8fdc17b84739..fddb3e0e8feb 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -983,6 +983,8 @@ int vmbus_allocate_mmio(struct resource **new, struct hv_device *device_obj, resource_size_t size, resource_size_t align, bool fb_overlap_ok); +int vmbus_cpu_number_to_vp_number(int cpu_number); + /** * VMBUS_DEVICE - macro used to describe a specific hyperv vmbus device * -- cgit v1.2.3 From a108393dbf764efb2405f21ca759806c65b8bc16 Mon Sep 17 00:00:00 2001 From: Jake Oshins Date: Mon, 14 Dec 2015 16:01:40 -0800 Subject: drivers:hv: Export the API to invoke a hypercall on Hyper-V This patch exposes the function that hv_vmbus.ko uses to make hypercalls. This is necessary for retargeting an interrupt when it is given a new affinity. Since we are exporting this API, rename the API as it will be visible outside the hv.c file. Signed-off-by: Jake Oshins Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- include/linux/hyperv.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index fddb3e0e8feb..24d0b656e6e7 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -984,6 +984,7 @@ int vmbus_allocate_mmio(struct resource **new, struct hv_device *device_obj, bool fb_overlap_ok); int vmbus_cpu_number_to_vp_number(int cpu_number); +u64 hv_do_hypercall(u64 control, void *input, void *output); /** * VMBUS_DEVICE - macro used to describe a specific hyperv vmbus device -- cgit v1.2.3 From 3053c762444a83ec6a8777f9476668b23b8ab180 Mon Sep 17 00:00:00 2001 From: Jake Oshins Date: Mon, 14 Dec 2015 16:01:41 -0800 Subject: drivers:hv: Define the channel type for Hyper-V PCI Express pass-through This defines the channel type for PCI front-ends in Hyper-V VMs. Signed-off-by: Jake Oshins Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- include/linux/hyperv.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include/linux') diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index 24d0b656e6e7..c9a9eed89af2 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -1140,6 +1140,17 @@ u64 hv_do_hypercall(u64 control, void *input, void *output); 0xab, 0x99, 0xbd, 0x1f, 0x1c, 0x86, 0xb5, 0x01 \ } +/* + * PCI Express Pass Through + * {44C4F61D-4444-4400-9D52-802E27EDE19F} + */ + +#define HV_PCIE_GUID \ + .guid = { \ + 0x1D, 0xF6, 0xC4, 0x44, 0x44, 0x44, 0x00, 0x44, \ + 0x9D, 0x52, 0x80, 0x2E, 0x27, 0xED, 0xE1, 0x9F \ + } + /* * Common header for Hyper-V ICs */ -- cgit v1.2.3 From af3ff643ea91ba64dd8d0b1cbed54d44512f96cd Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Mon, 14 Dec 2015 16:01:43 -0800 Subject: Drivers: hv: vmbus: Use uuid_le type consistently Consistently use uuid_le type in the Hyper-V driver code. Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- include/linux/hyperv.h | 92 ++++++++++++++--------------------------- include/linux/mod_devicetable.h | 2 +- 2 files changed, 33 insertions(+), 61 deletions(-) (limited to 'include/linux') diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index c9a9eed89af2..b9f3bb25d8b4 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -997,6 +997,8 @@ u64 hv_do_hypercall(u64 control, void *input, void *output); .guid = { g0, g1, g2, g3, g4, g5, g6, g7, \ g8, g9, ga, gb, gc, gd, ge, gf }, + + /* * GUID definitions of various offer types - services offered to the guest. */ @@ -1006,118 +1008,94 @@ u64 hv_do_hypercall(u64 control, void *input, void *output); * {f8615163-df3e-46c5-913f-f2d2f965ed0e} */ #define HV_NIC_GUID \ - .guid = { \ - 0x63, 0x51, 0x61, 0xf8, 0x3e, 0xdf, 0xc5, 0x46, \ - 0x91, 0x3f, 0xf2, 0xd2, 0xf9, 0x65, 0xed, 0x0e \ - } + .guid = UUID_LE(0xf8615163, 0xdf3e, 0x46c5, 0x91, 0x3f, \ + 0xf2, 0xd2, 0xf9, 0x65, 0xed, 0x0e) /* * IDE GUID * {32412632-86cb-44a2-9b5c-50d1417354f5} */ #define HV_IDE_GUID \ - .guid = { \ - 0x32, 0x26, 0x41, 0x32, 0xcb, 0x86, 0xa2, 0x44, \ - 0x9b, 0x5c, 0x50, 0xd1, 0x41, 0x73, 0x54, 0xf5 \ - } + .guid = UUID_LE(0x32412632, 0x86cb, 0x44a2, 0x9b, 0x5c, \ + 0x50, 0xd1, 0x41, 0x73, 0x54, 0xf5) /* * SCSI GUID * {ba6163d9-04a1-4d29-b605-72e2ffb1dc7f} */ #define HV_SCSI_GUID \ - .guid = { \ - 0xd9, 0x63, 0x61, 0xba, 0xa1, 0x04, 0x29, 0x4d, \ - 0xb6, 0x05, 0x72, 0xe2, 0xff, 0xb1, 0xdc, 0x7f \ - } + .guid = UUID_LE(0xba6163d9, 0x04a1, 0x4d29, 0xb6, 0x05, \ + 0x72, 0xe2, 0xff, 0xb1, 0xdc, 0x7f) /* * Shutdown GUID * {0e0b6031-5213-4934-818b-38d90ced39db} */ #define HV_SHUTDOWN_GUID \ - .guid = { \ - 0x31, 0x60, 0x0b, 0x0e, 0x13, 0x52, 0x34, 0x49, \ - 0x81, 0x8b, 0x38, 0xd9, 0x0c, 0xed, 0x39, 0xdb \ - } + .guid = UUID_LE(0x0e0b6031, 0x5213, 0x4934, 0x81, 0x8b, \ + 0x38, 0xd9, 0x0c, 0xed, 0x39, 0xdb) /* * Time Synch GUID * {9527E630-D0AE-497b-ADCE-E80AB0175CAF} */ #define HV_TS_GUID \ - .guid = { \ - 0x30, 0xe6, 0x27, 0x95, 0xae, 0xd0, 0x7b, 0x49, \ - 0xad, 0xce, 0xe8, 0x0a, 0xb0, 0x17, 0x5c, 0xaf \ - } + .guid = UUID_LE(0x9527e630, 0xd0ae, 0x497b, 0xad, 0xce, \ + 0xe8, 0x0a, 0xb0, 0x17, 0x5c, 0xaf) /* * Heartbeat GUID * {57164f39-9115-4e78-ab55-382f3bd5422d} */ #define HV_HEART_BEAT_GUID \ - .guid = { \ - 0x39, 0x4f, 0x16, 0x57, 0x15, 0x91, 0x78, 0x4e, \ - 0xab, 0x55, 0x38, 0x2f, 0x3b, 0xd5, 0x42, 0x2d \ - } + .guid = UUID_LE(0x57164f39, 0x9115, 0x4e78, 0xab, 0x55, \ + 0x38, 0x2f, 0x3b, 0xd5, 0x42, 0x2d) /* * KVP GUID * {a9a0f4e7-5a45-4d96-b827-8a841e8c03e6} */ #define HV_KVP_GUID \ - .guid = { \ - 0xe7, 0xf4, 0xa0, 0xa9, 0x45, 0x5a, 0x96, 0x4d, \ - 0xb8, 0x27, 0x8a, 0x84, 0x1e, 0x8c, 0x3, 0xe6 \ - } + .guid = UUID_LE(0xa9a0f4e7, 0x5a45, 0x4d96, 0xb8, 0x27, \ + 0x8a, 0x84, 0x1e, 0x8c, 0x03, 0xe6) /* * Dynamic memory GUID * {525074dc-8985-46e2-8057-a307dc18a502} */ #define HV_DM_GUID \ - .guid = { \ - 0xdc, 0x74, 0x50, 0X52, 0x85, 0x89, 0xe2, 0x46, \ - 0x80, 0x57, 0xa3, 0x07, 0xdc, 0x18, 0xa5, 0x02 \ - } + .guid = UUID_LE(0x525074dc, 0x8985, 0x46e2, 0x80, 0x57, \ + 0xa3, 0x07, 0xdc, 0x18, 0xa5, 0x02) /* * Mouse GUID * {cfa8b69e-5b4a-4cc0-b98b-8ba1a1f3f95a} */ #define HV_MOUSE_GUID \ - .guid = { \ - 0x9e, 0xb6, 0xa8, 0xcf, 0x4a, 0x5b, 0xc0, 0x4c, \ - 0xb9, 0x8b, 0x8b, 0xa1, 0xa1, 0xf3, 0xf9, 0x5a \ - } + .guid = UUID_LE(0xcfa8b69e, 0x5b4a, 0x4cc0, 0xb9, 0x8b, \ + 0x8b, 0xa1, 0xa1, 0xf3, 0xf9, 0x5a) /* * VSS (Backup/Restore) GUID */ #define HV_VSS_GUID \ - .guid = { \ - 0x29, 0x2e, 0xfa, 0x35, 0x23, 0xea, 0x36, 0x42, \ - 0x96, 0xae, 0x3a, 0x6e, 0xba, 0xcb, 0xa4, 0x40 \ - } + .guid = UUID_LE(0x35fa2e29, 0xea23, 0x4236, 0x96, 0xae, \ + 0x3a, 0x6e, 0xba, 0xcb, 0xa4, 0x40) /* * Synthetic Video GUID * {DA0A7802-E377-4aac-8E77-0558EB1073F8} */ #define HV_SYNTHVID_GUID \ - .guid = { \ - 0x02, 0x78, 0x0a, 0xda, 0x77, 0xe3, 0xac, 0x4a, \ - 0x8e, 0x77, 0x05, 0x58, 0xeb, 0x10, 0x73, 0xf8 \ - } + .guid = UUID_LE(0xda0a7802, 0xe377, 0x4aac, 0x8e, 0x77, \ + 0x05, 0x58, 0xeb, 0x10, 0x73, 0xf8) /* * Synthetic FC GUID * {2f9bcc4a-0069-4af3-b76b-6fd0be528cda} */ #define HV_SYNTHFC_GUID \ - .guid = { \ - 0x4A, 0xCC, 0x9B, 0x2F, 0x69, 0x00, 0xF3, 0x4A, \ - 0xB7, 0x6B, 0x6F, 0xD0, 0xBE, 0x52, 0x8C, 0xDA \ - } + .guid = UUID_LE(0x2f9bcc4a, 0x0069, 0x4af3, 0xb7, 0x6b, \ + 0x6f, 0xd0, 0xbe, 0x52, 0x8c, 0xda) /* * Guest File Copy Service @@ -1125,20 +1103,16 @@ u64 hv_do_hypercall(u64 control, void *input, void *output); */ #define HV_FCOPY_GUID \ - .guid = { \ - 0xE3, 0x4B, 0xD1, 0x34, 0xE4, 0xDE, 0xC8, 0x41, \ - 0x9A, 0xE7, 0x6B, 0x17, 0x49, 0x77, 0xC1, 0x92 \ - } + .guid = UUID_LE(0x34d14be3, 0xdee4, 0x41c8, 0x9a, 0xe7, \ + 0x6b, 0x17, 0x49, 0x77, 0xc1, 0x92) /* * NetworkDirect. This is the guest RDMA service. * {8c2eaf3d-32a7-4b09-ab99-bd1f1c86b501} */ #define HV_ND_GUID \ - .guid = { \ - 0x3d, 0xaf, 0x2e, 0x8c, 0xa7, 0x32, 0x09, 0x4b, \ - 0xab, 0x99, 0xbd, 0x1f, 0x1c, 0x86, 0xb5, 0x01 \ - } + .guid = UUID_LE(0x8c2eaf3d, 0x32a7, 0x4b09, 0xab, 0x99, \ + 0xbd, 0x1f, 0x1c, 0x86, 0xb5, 0x01) /* * PCI Express Pass Through @@ -1146,10 +1120,8 @@ u64 hv_do_hypercall(u64 control, void *input, void *output); */ #define HV_PCIE_GUID \ - .guid = { \ - 0x1D, 0xF6, 0xC4, 0x44, 0x44, 0x44, 0x00, 0x44, \ - 0x9D, 0x52, 0x80, 0x2E, 0x27, 0xED, 0xE1, 0x9F \ - } + .guid = UUID_LE(0x44c4f61d, 0x4444, 0x4400, 0x9d, 0x52, \ + 0x80, 0x2e, 0x27, 0xed, 0xe1, 0x9f) /* * Common header for Hyper-V ICs diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index 64f36e09a790..6e4c645e1c0d 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -404,7 +404,7 @@ struct virtio_device_id { * For Hyper-V devices we use the device guid as the id. */ struct hv_vmbus_device_id { - __u8 guid[16]; + uuid_le guid; kernel_ulong_t driver_data; /* Data private to the driver */ }; -- cgit v1.2.3 From 90e031fa06ad6b660a8e9bebbb80bd30e555a2a5 Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Mon, 14 Dec 2015 16:01:45 -0800 Subject: Drivers: hv: vmbus: Get rid of the unused macro The macro VMBUS_DEVICE() is unused; get rid of it. Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- include/linux/hyperv.h | 13 ------------- 1 file changed, 13 deletions(-) (limited to 'include/linux') diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index b9f3bb25d8b4..f773a6871f4c 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -986,19 +986,6 @@ int vmbus_allocate_mmio(struct resource **new, struct hv_device *device_obj, int vmbus_cpu_number_to_vp_number(int cpu_number); u64 hv_do_hypercall(u64 control, void *input, void *output); -/** - * VMBUS_DEVICE - macro used to describe a specific hyperv vmbus device - * - * This macro is used to create a struct hv_vmbus_device_id that matches a - * specific device. - */ -#define VMBUS_DEVICE(g0, g1, g2, g3, g4, g5, g6, g7, \ - g8, g9, ga, gb, gc, gd, ge, gf) \ - .guid = { g0, g1, g2, g3, g4, g5, g6, g7, \ - g8, g9, ga, gb, gc, gd, ge, gf }, - - - /* * GUID definitions of various offer types - services offered to the guest. */ -- cgit v1.2.3 From 8599846d73997cdbccf63f23394d871cfad1e5e6 Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Mon, 14 Dec 2015 16:01:54 -0800 Subject: Drivers: hv: vmbus: Fix a Host signaling bug Currently we have two policies for deciding when to signal the host: One based on the ring buffer state and the other based on what the VMBUS client driver wants to do. Consider the case when the client wants to explicitly control when to signal the host. In this case, if the client were to defer signaling, we will not be able to signal the host subsequently when the client does want to signal since the ring buffer state will prevent the signaling. Implement logic to have only one signaling policy in force for a given channel. Signed-off-by: K. Y. Srinivasan Reviewed-by: Haiyang Zhang Tested-by: Haiyang Zhang Cc: # v4.2+ Signed-off-by: Greg Kroah-Hartman --- include/linux/hyperv.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'include/linux') diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index f773a6871f4c..acd995b81c6b 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -630,6 +630,11 @@ struct hv_input_signal_event_buffer { struct hv_input_signal_event event; }; +enum hv_signal_policy { + HV_SIGNAL_POLICY_DEFAULT = 0, + HV_SIGNAL_POLICY_EXPLICIT, +}; + struct vmbus_channel { /* Unique channel id */ int id; @@ -757,8 +762,21 @@ struct vmbus_channel { * link up channels based on their CPU affinity. */ struct list_head percpu_list; + /* + * Host signaling policy: The default policy will be + * based on the ring buffer state. We will also support + * a policy where the client driver can have explicit + * signaling control. + */ + enum hv_signal_policy signal_policy; }; +static inline void set_channel_signal_state(struct vmbus_channel *c, + enum hv_signal_policy policy) +{ + c->signal_policy = policy; +} + static inline void set_channel_read_state(struct vmbus_channel *c, bool state) { c->batched_reading = state; -- cgit v1.2.3 From 45870a441361d1c05a5f767c4ece2f6e30e0da9c Mon Sep 17 00:00:00 2001 From: Vitaly Kuznetsov Date: Mon, 14 Dec 2015 19:01:58 -0800 Subject: Drivers: hv: ring_buffer: remove stray smp_read_barrier_depends() smp_read_barrier_depends() does nothing on almost all arcitectures including x86 and having it in the beginning of hv_get_ringbuffer_availbytes() does not provide any guarantees anyway. Signed-off-by: Vitaly Kuznetsov Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- include/linux/hyperv.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index acd995b81c6b..179ff330af59 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -141,8 +141,6 @@ hv_get_ringbuffer_availbytes(struct hv_ring_buffer_info *rbi, { u32 read_loc, write_loc, dsize; - smp_read_barrier_depends(); - /* Capture the read/write indices before they changed */ read_loc = rbi->ring_buffer->read_index; write_loc = rbi->ring_buffer->write_index; -- cgit v1.2.3 From 51f141a97a1406bb0b59d490e837a39ccb7c3999 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Wed, 18 Nov 2015 14:34:09 +0900 Subject: usb: renesas_usbhs: Modify pipe configuration The current code has info->bufnmb_last to calculate the BUFNMB bits of PIPEBUF register. However, since the bufnmb_last is initialized in the usbhs_pipe_init() only, this driver is possible to set unexpected value to the register if usb_ep_{enable,disable}() are called many times. So, this patch modifies the pipe configuration via struct renesas_usbhs_driver_param to simplify the code. Also this patch changes: - a double buffer configuration - isochronous buffer size from 512 to 1024 Signed-off-by: Yoshihiro Shimoda Signed-off-by: Felipe Balbi --- include/linux/usb/renesas_usbhs.h | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb/renesas_usbhs.h b/include/linux/usb/renesas_usbhs.h index bfb74723f151..4db191fe8c2c 100644 --- a/include/linux/usb/renesas_usbhs.h +++ b/include/linux/usb/renesas_usbhs.h @@ -105,12 +105,26 @@ struct renesas_usbhs_platform_callback { * some register needs USB chip specific parameters. * This struct show it to driver */ + +struct renesas_usbhs_driver_pipe_config { + u8 type; /* USB_ENDPOINT_XFER_xxx */ + u16 bufsize; + u8 bufnum; + bool double_buf; +}; +#define RENESAS_USBHS_PIPE(_type, _size, _num, _double_buf) { \ + .type = (_type), \ + .bufsize = (_size), \ + .bufnum = (_num), \ + .double_buf = (_double_buf), \ + } + struct renesas_usbhs_driver_param { /* * pipe settings */ - u32 *pipe_type; /* array of USB_ENDPOINT_XFER_xxx (from ep0) */ - int pipe_size; /* pipe_type array size */ + struct renesas_usbhs_driver_pipe_config *pipe_configs; + int pipe_size; /* pipe_configs array size */ /* * option: -- cgit v1.2.3 From 98bfb39466954c69d2a448e6ddcab6d91cd48e25 Mon Sep 17 00:00:00 2001 From: Bin Liu Date: Tue, 3 Nov 2015 11:51:15 -0600 Subject: usb: of: add an api to get dr_mode by the phy node Some USB phy drivers have different handling for the controller in each dr_mode. But the phy driver does not have visibility to the dr_mode of the controller. This adds an api to return the dr_mode of the controller which associates the given phy node. Signed-off-by: Bin Liu Signed-off-by: Felipe Balbi --- include/linux/usb/of.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb/of.h b/include/linux/usb/of.h index c3fe9e48ce27..3805757dcdc2 100644 --- a/include/linux/usb/of.h +++ b/include/linux/usb/of.h @@ -12,10 +12,15 @@ #include #if IS_ENABLED(CONFIG_OF) +enum usb_dr_mode of_usb_get_dr_mode_by_phy(struct device_node *phy_np); bool of_usb_host_tpl_support(struct device_node *np); int of_usb_update_otg_caps(struct device_node *np, struct usb_otg_caps *otg_caps); #else +enum usb_dr_mode of_usb_get_dr_mode_by_phy(struct device_node *phy_np) +{ + return USB_DR_MODE_UNKNOWN; +} static inline bool of_usb_host_tpl_support(struct device_node *np) { return false; -- cgit v1.2.3 From 375da6271b685e97d2d936fffa6e405b93674c26 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 4 Dec 2015 17:04:25 +0100 Subject: usb: phy: Remove unused Renesas R-Car (Gen1) USB PHY driver As of commit 3d7608e4c169af03 ("ARM: shmobile: bockw: remove legacy board file and config"), the Renesas R-Car (Gen1) USB PHY driver is no longer used. In theory it could still be used on R-Car Gen1 SoCs, but that would require adding DT support to the driver. Instead, a new driver using the generic PHY framework should be written, as was done for R-Car Gen2. Remove the driver for good. Acked-by: Simon Horman Signed-off-by: Geert Uytterhoeven Signed-off-by: Felipe Balbi --- include/linux/platform_data/usb-rcar-phy.h | 28 ---------------------------- 1 file changed, 28 deletions(-) delete mode 100644 include/linux/platform_data/usb-rcar-phy.h (limited to 'include/linux') diff --git a/include/linux/platform_data/usb-rcar-phy.h b/include/linux/platform_data/usb-rcar-phy.h deleted file mode 100644 index 8ec6964a32a5..000000000000 --- a/include/linux/platform_data/usb-rcar-phy.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Copyright (C) 2013 Renesas Solutions Corp. - * Copyright (C) 2013 Cogent Embedded, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __USB_RCAR_PHY_H -#define __USB_RCAR_PHY_H - -#include - -struct rcar_phy_platform_data { - bool ferrite_bead:1; /* (R8A7778 only) */ - - bool port1_func:1; /* true: port 1 used by function, false: host */ - unsigned penc1:1; /* Output of the PENC1 pin in function mode */ - struct { /* Overcurrent pin control for ports 0..2 */ - bool select_3_3v:1; /* true: USB_OVCn pin, false: OVCn pin */ - /* Set to false on port 1 in function mode */ - bool active_high:1; /* true: active high, false: active low */ - /* Set to true on port 1 in function mode */ - } ovc_pin[3]; /* (R8A7778 only has 2 ports) */ -}; - -#endif /* __USB_RCAR_PHY_H */ -- cgit v1.2.3 From 2284b29d3d9dd16490909962574d7f3fef83fd97 Mon Sep 17 00:00:00 2001 From: Ruslan Bilovol Date: Mon, 23 Nov 2015 09:56:35 +0100 Subject: usb: gadget: bind UDC by name passed via usb_gadget_driver structure Introduce new 'udc_name' member to usb_gadget_driver structure. The 'udc_name' is a name of UDC that usb_gadget_driver should be bound to. If udc_name is NULL, it will be bound to any available UDC. Tested-by: Maxime Ripard Signed-off-by: Ruslan Bilovol Signed-off-by: Marek Szyprowski Tested-by: Peter Chen Signed-off-by: Felipe Balbi --- include/linux/usb/gadget.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 3d583a10b926..63963c21866d 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -1012,6 +1012,8 @@ static inline int usb_gadget_activate(struct usb_gadget *gadget) * @reset: Invoked on USB bus reset. It is mandatory for all gadget drivers * and should be called in_interrupt. * @driver: Driver model state for this driver. + * @udc_name: A name of UDC this driver should be bound to. If udc_name is NULL, + * this driver will be bound to any available UDC. * * Devices are disabled till a gadget driver successfully bind()s, which * means the driver will handle setup() requests needed to enumerate (and @@ -1072,6 +1074,8 @@ struct usb_gadget_driver { /* FIXME support safe rmmod */ struct device_driver driver; + + char *udc_name; }; -- cgit v1.2.3 From 88f73ebdfa75602af18e070a4d5d6d9091bcfada Mon Sep 17 00:00:00 2001 From: Ruslan Bilovol Date: Mon, 23 Nov 2015 09:56:37 +0100 Subject: usb: gadget: udc-core: remove unused usb_udc_attach_driver() Now when last user of usb_udc_attach_driver() is switched to passing UDC name via usb_gadget_driver struct, it's safe to remove this function Tested-by: Maxime Ripard Signed-off-by: Ruslan Bilovol Signed-off-by: Marek Szyprowski Tested-by: Peter Chen Signed-off-by: Felipe Balbi --- include/linux/usb/gadget.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 63963c21866d..ce2188d338e6 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -1121,8 +1121,6 @@ extern int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget, void (*release)(struct device *dev)); extern int usb_add_gadget_udc(struct device *parent, struct usb_gadget *gadget); extern void usb_del_gadget_udc(struct usb_gadget *gadget); -extern int usb_udc_attach_driver(const char *name, - struct usb_gadget_driver *driver); /*-------------------------------------------------------------------------*/ -- cgit v1.2.3 From 855ed04a3758b205e84b269f92d26ab36ed8e2f7 Mon Sep 17 00:00:00 2001 From: Ruslan Bilovol Date: Mon, 23 Nov 2015 09:56:38 +0100 Subject: usb: gadget: udc-core: independent registration of gadgets and gadget drivers Change behavior during registration of gadgets and gadget drivers in udc-core. Instead of previous approach when for successful probe of usb gadget driver at least one usb gadget should be already registered use another one where gadget drivers and gadgets can be registered in udc-core independently. Independent registration of gadgets and gadget drivers is useful for built-in into kernel gadget and gadget driver case - because it's possible that gadget is really probed only on late_init stage (due to deferred probe) whereas gadget driver's probe is silently failed on module_init stage due to no any UDC added. Also it is useful for modules case - now there is no difference what module to insert first: gadget module or gadget driver one. Tested-by: Maxime Ripard Signed-off-by: Ruslan Bilovol [simplified code as requested by Alan Stern and Felipe Balbi, fixed checkpatch issues] Signed-off-by: Marek Szyprowski Tested-by: Peter Chen Signed-off-by: Felipe Balbi --- include/linux/usb/gadget.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index ce2188d338e6..92467eea76de 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -1014,6 +1014,7 @@ static inline int usb_gadget_activate(struct usb_gadget *gadget) * @driver: Driver model state for this driver. * @udc_name: A name of UDC this driver should be bound to. If udc_name is NULL, * this driver will be bound to any available UDC. + * @pending: UDC core private data used for deferred probe of this driver. * * Devices are disabled till a gadget driver successfully bind()s, which * means the driver will handle setup() requests needed to enumerate (and @@ -1076,6 +1077,7 @@ struct usb_gadget_driver { struct device_driver driver; char *udc_name; + struct list_head pending; }; -- cgit v1.2.3 From 8055555fc4590fbda32d4bbf7888bdb2cd4b2b74 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 30 Nov 2015 21:37:12 -0800 Subject: usb: musb: core: Fix handling of the phy notifications We currently can't unload omap2430 MUSB platform glue driver module and this cause issues for fixing the MUSB code further. The reason we can't remove omap2430 is because it uses the PHY functions and also exports the omap_musb_mailbox function that some PHY drivers are using. Let's fix the issue by exporting a more generic musb_mailbox function from the MUSB core and allow platform glue layers to register phy_callback function as needed. And now we can now also get rid of the include/linux/musb-omap.h. Cc: Bin Liu Cc: Felipe Balbi Cc: Kishon Vijay Abraham I Cc: NeilBrown Reviewed-by: Kishon Vijay Abraham I Signed-off-by: Tony Lindgren Signed-off-by: Felipe Balbi --- include/linux/usb/musb-omap.h | 30 ------------------------------ include/linux/usb/musb.h | 15 +++++++++++++++ 2 files changed, 15 insertions(+), 30 deletions(-) delete mode 100644 include/linux/usb/musb-omap.h (limited to 'include/linux') diff --git a/include/linux/usb/musb-omap.h b/include/linux/usb/musb-omap.h deleted file mode 100644 index 7774c5986f07..000000000000 --- a/include/linux/usb/musb-omap.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Copyright (C) 2011-2012 by Texas Instruments - * - * The Inventra Controller Driver for Linux is free software; you - * can redistribute it and/or modify it under the terms of the GNU - * General Public License version 2 as published by the Free Software - * Foundation. - */ - -#ifndef __MUSB_OMAP_H__ -#define __MUSB_OMAP_H__ - -enum omap_musb_vbus_id_status { - OMAP_MUSB_UNKNOWN = 0, - OMAP_MUSB_ID_GROUND, - OMAP_MUSB_ID_FLOAT, - OMAP_MUSB_VBUS_VALID, - OMAP_MUSB_VBUS_OFF, -}; - -#if (defined(CONFIG_USB_MUSB_OMAP2PLUS) || \ - defined(CONFIG_USB_MUSB_OMAP2PLUS_MODULE)) -void omap_musb_mailbox(enum omap_musb_vbus_id_status status); -#else -static inline void omap_musb_mailbox(enum omap_musb_vbus_id_status status) -{ -} -#endif - -#endif /* __MUSB_OMAP_H__ */ diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h index fa6dc132bd1b..96ddfb7ab018 100644 --- a/include/linux/usb/musb.h +++ b/include/linux/usb/musb.h @@ -133,6 +133,21 @@ struct musb_hdrc_platform_data { const void *platform_ops; }; +enum musb_vbus_id_status { + MUSB_UNKNOWN = 0, + MUSB_ID_GROUND, + MUSB_ID_FLOAT, + MUSB_VBUS_VALID, + MUSB_VBUS_OFF, +}; + +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) +void musb_mailbox(enum musb_vbus_id_status status); +#else +static inline void musb_mailbox(enum musb_vbus_id_status status) +{ +} +#endif /* TUSB 6010 support */ -- cgit v1.2.3 From b8bbd6b2923279f1c9c74d59638b38a1eace78e8 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 12 Nov 2015 13:36:06 +0100 Subject: serial: sh-sci: Add BRG register definitions Add register definitions for the Baud Rate Generator for External Clock (BRG), as found in some SCIF and in HSCIF, including a new regtype for the "SH-4(A)"-derived SCIF variant with BRG. Signed-off-by: Geert Uytterhoeven Acked-by: Greg Kroah-Hartman --- include/linux/serial_sci.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h index 7c536ac5be05..9f2bfd055742 100644 --- a/include/linux/serial_sci.h +++ b/include/linux/serial_sci.h @@ -32,6 +32,7 @@ enum { SCIx_SH2_SCIF_FIFODATA_REGTYPE, SCIx_SH3_SCIF_REGTYPE, SCIx_SH4_SCIF_REGTYPE, + SCIx_SH4_SCIF_BRG_REGTYPE, SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE, SCIx_SH4_SCIF_FIFODATA_REGTYPE, SCIx_SH7705_SCIF_REGTYPE, -- cgit v1.2.3 From be99c84300950e876074916b215b511f69f83d3b Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 17 Dec 2015 09:55:41 -0600 Subject: usb: of: fix build breakage on !OF If OF is disabled, we will try to define a stub for of_usb_get_dr_mode_by_phy(), however that missed a static inline annotation which made us redefine the stub over and over again. Fix that. Fixes: 98bfb3946695 ("usb: of: add an api to get dr_mode by the phy node") Signed-off-by: Felipe Balbi --- include/linux/usb/of.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/usb/of.h b/include/linux/usb/of.h index 3805757dcdc2..974bce93aa28 100644 --- a/include/linux/usb/of.h +++ b/include/linux/usb/of.h @@ -17,7 +17,8 @@ bool of_usb_host_tpl_support(struct device_node *np); int of_usb_update_otg_caps(struct device_node *np, struct usb_otg_caps *otg_caps); #else -enum usb_dr_mode of_usb_get_dr_mode_by_phy(struct device_node *phy_np) +static inline enum usb_dr_mode +of_usb_get_dr_mode_by_phy(struct device_node *phy_np) { return USB_DR_MODE_UNKNOWN; } -- cgit v1.2.3 From fcd71d9cc6e301bdbd71829b79e80168473ca609 Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Tue, 8 Dec 2015 14:17:55 +0530 Subject: of: fix declaration of of_io_request_and_map We are having build failure with linux-next for sparc allmodconfig with the error messages: drivers/built-in.o: In function `meson6_timer_init': meson6_timer.c:(.init.text+0x5fe8): undefined reference to `of_io_request_and_map' drivers/built-in.o: In function `mtk_timer_init': mtk_timer.c:(.init.text+0x6af0): undefined reference to `of_io_request_and_map' drivers/built-in.o: In function `asm9260_timer_init': asm9260_timer.c:(.init.text+0x6c48): undefined reference to `of_io_request_and_map' CONFIG_OF is defined for sparc so it is expected that we have a definition of of_io_request_and_map() but of/address.c is only compiled if it is !SPARC. In other words, CONFIG_OF_ADDRESS is not defined for sparc so we get the build failure. Fixes: e572f844ca66 ("clocksource/drivers/meson6: Add the COMPILE_TEST option") Fixes: bec8c4617611 ("clocksource/drivers/mediatek: Add the COMPILE_TEST option") Fixes: 4a373b45f94a ("clocksource/drivers/asm9260: Add the COMPILE_TEST option") Acked-by: Daniel Lezcano Signed-off-by: Sudip Mukherjee [robh: move include of io.h out of ifdef's] Signed-off-by: Rob Herring --- include/linux/of_address.h | 19 ++++++++----------- 1 file changed, 8 insertions(+), 11 deletions(-) (limited to 'include/linux') diff --git a/include/linux/of_address.h b/include/linux/of_address.h index 507daad0bc8d..01c0a556448b 100644 --- a/include/linux/of_address.h +++ b/include/linux/of_address.h @@ -3,6 +3,7 @@ #include #include #include +#include struct of_pci_range_parser { struct device_node *node; @@ -36,6 +37,8 @@ extern struct device_node *of_find_matching_node_by_address( const struct of_device_id *matches, u64 base_address); extern void __iomem *of_iomap(struct device_node *device, int index); +void __iomem *of_io_request_and_map(struct device_node *device, + int index, const char *name); /* Extract an address from a device, returns the region size and * the address space flags too. The PCI version uses a BAR number @@ -57,6 +60,11 @@ extern int of_dma_get_range(struct device_node *np, u64 *dma_addr, u64 *paddr, u64 *size); extern bool of_dma_is_coherent(struct device_node *np); #else /* CONFIG_OF_ADDRESS */ +static inline void __iomem *of_io_request_and_map(struct device_node *device, + int index, const char *name) +{ + return IOMEM_ERR_PTR(-EINVAL); +} static inline u64 of_translate_address(struct device_node *np, const __be32 *addr) @@ -112,12 +120,7 @@ static inline bool of_dma_is_coherent(struct device_node *np) extern int of_address_to_resource(struct device_node *dev, int index, struct resource *r); void __iomem *of_iomap(struct device_node *node, int index); -void __iomem *of_io_request_and_map(struct device_node *device, - int index, const char *name); #else - -#include - static inline int of_address_to_resource(struct device_node *dev, int index, struct resource *r) { @@ -128,12 +131,6 @@ static inline void __iomem *of_iomap(struct device_node *device, int index) { return NULL; } - -static inline void __iomem *of_io_request_and_map(struct device_node *device, - int index, const char *name) -{ - return IOMEM_ERR_PTR(-EINVAL); -} #endif #if defined(CONFIG_OF_ADDRESS) && defined(CONFIG_PCI) -- cgit v1.2.3 From a8135d0d79e9d0ad3a4ff494fceeaae838becf38 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Mon, 14 Dec 2015 22:47:40 +0200 Subject: dmaengine: core: Introduce new, universal API to request a channel The two API function can cover most, if not all current APIs used to request a channel. With minimal effort dmaengine drivers, platforms and dmaengine user drivers can be converted to use the two function. struct dma_chan *dma_request_chan_by_mask(const dma_cap_mask_t *mask); To request any channel matching with the requested capabilities, can be used to request channel for memcpy, memset, xor, etc where no hardware synchronization is needed. struct dma_chan *dma_request_chan(struct device *dev, const char *name); To request a slave channel. The dma_request_chan() will try to find the channel via DT, ACPI or in case if the kernel booted in non DT/ACPI mode it will use a filter lookup table and retrieves the needed information from the dma_slave_map provided by the DMA drivers. This legacy mode needs changes in platform code, in dmaengine drivers and finally the dmaengine user drivers can be converted: For each dmaengine driver an array of DMA device, slave and the parameter for the filter function needs to be added: static const struct dma_slave_map da830_edma_map[] = { { "davinci-mcasp.0", "rx", EDMA_FILTER_PARAM(0, 0) }, { "davinci-mcasp.0", "tx", EDMA_FILTER_PARAM(0, 1) }, { "davinci-mcasp.1", "rx", EDMA_FILTER_PARAM(0, 2) }, { "davinci-mcasp.1", "tx", EDMA_FILTER_PARAM(0, 3) }, { "davinci-mcasp.2", "rx", EDMA_FILTER_PARAM(0, 4) }, { "davinci-mcasp.2", "tx", EDMA_FILTER_PARAM(0, 5) }, { "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 14) }, { "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 15) }, { "da830-mmc.0", "rx", EDMA_FILTER_PARAM(0, 16) }, { "da830-mmc.0", "tx", EDMA_FILTER_PARAM(0, 17) }, { "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 18) }, { "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 19) }, }; This information is going to be needed by the dmaengine driver, so modification to the platform_data is needed, and the driver map should be added to the pdata of the DMA driver: da8xx_edma0_pdata.slave_map = da830_edma_map; da8xx_edma0_pdata.slavecnt = ARRAY_SIZE(da830_edma_map); The DMA driver then needs to configure the needed device -> filter_fn mapping before it registers with dma_async_device_register() : ecc->dma_slave.filter_map.map = info->slave_map; ecc->dma_slave.filter_map.mapcnt = info->slavecnt; ecc->dma_slave.filter_map.fn = edma_filter_fn; When neither DT or ACPI lookup is available the dma_request_chan() will try to match the requester's device name with the filter_map's list of device names, when a match found it will use the information from the dma_slave_map to get the channel with the dma_get_channel() internal function. Signed-off-by: Peter Ujfalusi Reviewed-by: Arnd Bergmann Signed-off-by: Vinod Koul --- include/linux/dmaengine.h | 51 ++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 44 insertions(+), 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index c47c68e535e8..d50a6b51a73d 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -606,12 +606,39 @@ enum dmaengine_alignment { DMAENGINE_ALIGN_64_BYTES = 6, }; +/** + * struct dma_slave_map - associates slave device and it's slave channel with + * parameter to be used by a filter function + * @devname: name of the device + * @slave: slave channel name + * @param: opaque parameter to pass to struct dma_filter.fn + */ +struct dma_slave_map { + const char *devname; + const char *slave; + void *param; +}; + +/** + * struct dma_filter - information for slave device/channel to filter_fn/param + * mapping + * @fn: filter function callback + * @mapcnt: number of slave device/channel in the map + * @map: array of channel to filter mapping data + */ +struct dma_filter { + dma_filter_fn fn; + int mapcnt; + const struct dma_slave_map *map; +}; + /** * struct dma_device - info on the entity supplying DMA services * @chancnt: how many DMA channels are supported * @privatecnt: how many DMA channels are requested by dma_request_channel * @channels: the list of struct dma_chan * @global_node: list_head for global dma_device_list + * @filter: information for device/slave to filter function/param mapping * @cap_mask: one or more dma_capability flags * @max_xor: maximum number of xor sources, 0 if no capability * @max_pq: maximum number of PQ sources and PQ-continue capability @@ -666,6 +693,7 @@ struct dma_device { unsigned int privatecnt; struct list_head channels; struct list_head global_node; + struct dma_filter filter; dma_cap_mask_t cap_mask; unsigned short max_xor; unsigned short max_pq; @@ -1140,9 +1168,11 @@ enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx); void dma_issue_pending_all(void); struct dma_chan *__dma_request_channel(const dma_cap_mask_t *mask, dma_filter_fn fn, void *fn_param); -struct dma_chan *dma_request_slave_channel_reason(struct device *dev, - const char *name); struct dma_chan *dma_request_slave_channel(struct device *dev, const char *name); + +struct dma_chan *dma_request_chan(struct device *dev, const char *name); +struct dma_chan *dma_request_chan_by_mask(const dma_cap_mask_t *mask); + void dma_release_channel(struct dma_chan *chan); int dma_get_slave_caps(struct dma_chan *chan, struct dma_slave_caps *caps); #else @@ -1166,16 +1196,21 @@ static inline struct dma_chan *__dma_request_channel(const dma_cap_mask_t *mask, { return NULL; } -static inline struct dma_chan *dma_request_slave_channel_reason( - struct device *dev, const char *name) -{ - return ERR_PTR(-ENODEV); -} static inline struct dma_chan *dma_request_slave_channel(struct device *dev, const char *name) { return NULL; } +static inline struct dma_chan *dma_request_chan(struct device *dev, + const char *name) +{ + return ERR_PTR(-ENODEV); +} +static inline struct dma_chan *dma_request_chan_by_mask( + const dma_cap_mask_t *mask) +{ + return ERR_PTR(-ENODEV); +} static inline void dma_release_channel(struct dma_chan *chan) { } @@ -1186,6 +1221,8 @@ static inline int dma_get_slave_caps(struct dma_chan *chan, } #endif +#define dma_request_slave_channel_reason(dev, name) dma_request_chan(dev, name) + static inline int dmaengine_desc_set_reuse(struct dma_async_tx_descriptor *tx) { struct dma_slave_caps caps; -- cgit v1.2.3 From 23e6723c060faf5a0fc8d7bfbec440d29943fa99 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Mon, 14 Dec 2015 22:47:41 +0200 Subject: dmaengine: edma: Add support for DMA filter mapping to slave devices Add support for providing device to filter_fn mapping so client drivers can switch to use the dma_request_chan() API. Signed-off-by: Peter Ujfalusi Reviewed-by: Arnd Bergmann Signed-off-by: Vinod Koul --- include/linux/platform_data/edma.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/platform_data/edma.h b/include/linux/platform_data/edma.h index e2878baeb90e..105700e62ea1 100644 --- a/include/linux/platform_data/edma.h +++ b/include/linux/platform_data/edma.h @@ -53,12 +53,16 @@ enum dma_event_q { #define EDMA_CTLR(i) ((i) >> 16) #define EDMA_CHAN_SLOT(i) ((i) & 0xffff) +#define EDMA_FILTER_PARAM(ctlr, chan) ((int[]) { EDMA_CTLR_CHAN(ctlr, chan) }) + struct edma_rsv_info { const s16 (*rsv_chans)[2]; const s16 (*rsv_slots)[2]; }; +struct dma_slave_map; + /* platform_data for EDMA driver */ struct edma_soc_info { /* @@ -76,6 +80,9 @@ struct edma_soc_info { s8 (*queue_priority_mapping)[2]; const s16 (*xbar_chans)[2]; + + const struct dma_slave_map *slave_map; + int slavecnt; }; #endif -- cgit v1.2.3 From 020c62ae38946cae01571a0b4e6f445dfdb7ec1c Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Mon, 14 Dec 2015 22:47:42 +0200 Subject: dmaengine: omap-dma: Add support for DMA filter mapping to slave devices Add support for providing device to filter_fn mapping so client drivers can switch to use the dma_request_chan() API. Signed-off-by: Peter Ujfalusi Reviewed-by: Arnd Bergmann Signed-off-by: Vinod Koul --- include/linux/omap-dma.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/omap-dma.h b/include/linux/omap-dma.h index 88fa8af2b937..1d99b61adc65 100644 --- a/include/linux/omap-dma.h +++ b/include/linux/omap-dma.h @@ -267,6 +267,9 @@ struct omap_dma_reg { u8 type; }; +#define SDMA_FILTER_PARAM(hw_req) ((int[]) { (hw_req) }) +struct dma_slave_map; + /* System DMA platform data structure */ struct omap_system_dma_plat_info { const struct omap_dma_reg *reg_map; @@ -278,6 +281,9 @@ struct omap_system_dma_plat_info { void (*clear_dma)(int lch); void (*dma_write)(u32 val, int reg, int lch); u32 (*dma_read)(int reg, int lch); + + const struct dma_slave_map *slave_map; + int slavecnt; }; #ifdef CONFIG_ARCH_OMAP2PLUS -- cgit v1.2.3 From 9c9eef89ec74433f00593938f8af5113383d898a Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Thu, 10 Dec 2015 09:00:23 +0100 Subject: mtd: nand: sh_flctl: use the mtd instance embedded in struct nand_chip struct nand_chip now embeds an mtd device. Make use of this mtd instance. Signed-off-by: Boris Brezillon Signed-off-by: Brian Norris --- include/linux/mtd/sh_flctl.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mtd/sh_flctl.h b/include/linux/mtd/sh_flctl.h index 1c28f8879b1c..76e3e88bedfe 100644 --- a/include/linux/mtd/sh_flctl.h +++ b/include/linux/mtd/sh_flctl.h @@ -143,7 +143,6 @@ enum flctl_ecc_res_t { struct dma_chan; struct sh_flctl { - struct mtd_info mtd; struct nand_chip chip; struct platform_device *pdev; struct dev_pm_qos_request pm_qos; @@ -186,7 +185,7 @@ struct sh_flctl_platform_data { static inline struct sh_flctl *mtd_to_flctl(struct mtd_info *mtdinfo) { - return container_of(mtdinfo, struct sh_flctl, mtd); + return container_of(mtd_to_nand(mtdinfo), struct sh_flctl, chip); } #endif /* __SH_FLCTL_H__ */ -- cgit v1.2.3 From 2d3b77bac34bf99d7fdfd712ec2dc4317b3e850b Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Thu, 10 Dec 2015 09:00:33 +0100 Subject: mtd: nand: update mtd_to_nand() Now that all drivers are using the mtd instance embedded in the nand_chip struct we can safely update the mtd_to_nand() implementation to use the container_of macro instead of returning the content of mtd->priv. This will allow us to remove mtd->priv = chip assignments done in all NAND controller drivers. Signed-off-by: Boris Brezillon Signed-off-by: Brian Norris --- include/linux/mtd/nand.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index b614ed2105ac..9cb7ace6fb1f 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -734,7 +734,7 @@ static inline struct device_node *nand_get_flash_node(struct nand_chip *chip) static inline struct nand_chip *mtd_to_nand(struct mtd_info *mtd) { - return mtd->priv; + return container_of(mtd, struct nand_chip, mtd); } static inline struct mtd_info *nand_to_mtd(struct nand_chip *chip) -- cgit v1.2.3 From 29574ede097438c560e8115caff9b6b8668730be Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Thu, 10 Dec 2015 09:00:38 +0100 Subject: mtd: nand: kill the chip->flash_node field Now that the nand_chip struct directly embeds an mtd_info struct we can get rid of the ->flash_node field and forward set/get_flash_node requests to the MTD layer. As a side effect, we no longer need the mtd_set_of_node() call done in nand_dt_init(). Signed-off-by: Boris Brezillon Signed-off-by: Brian Norris --- include/linux/mtd/nand.h | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 9cb7ace6fb1f..2bee2e42ae2f 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -545,7 +545,6 @@ struct nand_buffers { * flash device * @IO_ADDR_W: [BOARDSPECIFIC] address to write the 8 I/O lines of the * flash device. - * @flash_node: [BOARDSPECIFIC] device node describing this instance * @read_byte: [REPLACEABLE] read one byte from the chip * @read_word: [REPLACEABLE] read one word from the chip * @write_byte: [REPLACEABLE] write a single byte to the chip on the @@ -645,8 +644,6 @@ struct nand_chip { void __iomem *IO_ADDR_R; void __iomem *IO_ADDR_W; - struct device_node *flash_node; - uint8_t (*read_byte)(struct mtd_info *mtd); u16 (*read_word)(struct mtd_info *mtd); void (*write_byte)(struct mtd_info *mtd, uint8_t byte); @@ -724,12 +721,12 @@ struct nand_chip { static inline void nand_set_flash_node(struct nand_chip *chip, struct device_node *np) { - chip->flash_node = np; + mtd_set_of_node(&chip->mtd, np); } static inline struct device_node *nand_get_flash_node(struct nand_chip *chip) { - return chip->flash_node; + return mtd_get_of_node(&chip->mtd); } static inline struct nand_chip *mtd_to_nand(struct mtd_info *mtd) -- cgit v1.2.3 From 8142b47ef33c655a34e08efd46b65732fe190675 Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Mon, 14 Dec 2015 16:13:31 +0100 Subject: mtd: nand: remove unused and buggy get_platform_nandchip() helper function Nobody uses the get_platform_nandchip() helper function which is supposed to return a pointer to a platform_nand_chip struct from an mtd_info pointer. Moreover, this function is buggy since the introduction of the plat_nand layer (chip->priv is now storing a pointer to an intermediate plat_nand_data structure allocated in plat_nand_probe(), and we have no way to retrieve a pointer to the provided platform_nand_chip struct from this plat_nand_data pointer). While we are at it, remove the useless (and buggy, since it's pointing to something stored on the stack) data->chip.priv assignment. Signed-off-by: Boris Brezillon Fixes: 711fdf627ce1 ("[MTD] [NAND] platform NAND driver: add driver") Cc: Vitaly Wool Signed-off-by: Brian Norris --- include/linux/mtd/nand.h | 9 --------- 1 file changed, 9 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 2bee2e42ae2f..3e92be1d2d43 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -927,15 +927,6 @@ struct platform_nand_data { struct platform_nand_ctrl ctrl; }; -/* Some helpers to access the data structures */ -static inline -struct platform_nand_chip *get_platform_nandchip(struct mtd_info *mtd) -{ - struct nand_chip *chip = mtd->priv; - - return chip->priv; -} - /* return the supported features. */ static inline int onfi_feature(struct nand_chip *chip) { -- cgit v1.2.3 From 052876f8e5aec887d22c4d06e54aa5531ffcec75 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Fri, 18 Dec 2015 17:20:09 -0800 Subject: Input: uinput - add new UINPUT_DEV_SETUP and UI_ABS_SETUP ioctl This adds two new ioctls, UINPUT_DEV_SETUP and UI_ABS_SETUP, that replaces the old device setup method (by write()'ing "struct uinput_user_dev" to the node). The old method is not easily extendable and requires huge payloads. Furthermore, overloading write() without properly versioned objects is error-prone. Therefore, we introduce two new ioctls to replace the old method. These ioctls support all features of the old method, plus a "resolution" field for absinfo. Furthermore, it's properly forward-compatible to new ABS codes and a growing "struct input_absinfo" structure. UI_ABS_SETUP also allows user-space to skip unknown axes if not set. There is no need to copy the whole array temporarily into the kernel, but instead the caller issues several ioctl where we copy each value manually. Signed-off-by: David Herrmann Signed-off-by: Benjamin Tissoires Reviewed-by: David Herrmann Signed-off-by: Dmitry Torokhov --- include/linux/uinput.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/uinput.h b/include/linux/uinput.h index 0994c0d01a09..75de43da2301 100644 --- a/include/linux/uinput.h +++ b/include/linux/uinput.h @@ -20,6 +20,11 @@ * Author: Aristeu Sergio Rozanski Filho * * Changes/Revisions: + * 0.5 08/13/2015 (David Herrmann & + * Benjamin Tissoires ) + * - add UI_DEV_SETUP ioctl + * - add UI_ABS_SETUP ioctl + * - add UI_GET_VERSION ioctl * 0.4 01/09/2014 (Benjamin Tissoires ) * - add UI_GET_SYSNAME ioctl * 0.3 24/05/2006 (Anssi Hannula ) -- cgit v1.2.3 From 1873315fb156cbc8e46f28e8b128f17ff6c31728 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 8 Dec 2015 16:38:12 +0100 Subject: mtd: sh_flctl: pass FIFO as physical address By convention, the FIFO address we pass using dmaengine_slave_config is a physical address in the form that is understood by the DMA engine, as a dma_addr_t, phys_addr_t or resource_size_t. The sh_flctl driver however passes a virtual __iomem address that gets cast to dma_addr_t in the slave driver. This happens to work on shmobile because that platform sets up an identity mapping for its MMIO regions, but such code is not portable to other platforms, and prevents us from ever changing the platform mapping or reusing the driver on other architectures like ARM64 that might not have the mapping. We also get a warning about a type mismatch for the case that dma_addr_t is wider than a pointer, i.e. when CONFIG_LPAE is set: drivers/mtd/nand/sh_flctl.c: In function 'flctl_setup_dma': drivers/mtd/nand/sh_flctl.c:163:17: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] cfg.dst_addr = (dma_addr_t)FLDTFIFO(flctl); This changes the driver to instead pass the physical address of the FIFO that is extracted from the MMIO resource, making the code more portable and avoiding the warning. Signed-off-by: Arnd Bergmann Signed-off-by: Brian Norris --- include/linux/mtd/sh_flctl.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mtd/sh_flctl.h b/include/linux/mtd/sh_flctl.h index 76e3e88bedfe..2251add65fa7 100644 --- a/include/linux/mtd/sh_flctl.h +++ b/include/linux/mtd/sh_flctl.h @@ -147,6 +147,7 @@ struct sh_flctl { struct platform_device *pdev; struct dev_pm_qos_request pm_qos; void __iomem *reg; + resource_size_t fifo; uint8_t done_buff[2048 + 64]; /* max size 2048 + 64 */ int read_bytes; -- cgit v1.2.3 From 9955a7835bf376e12482583958b2661f501b868b Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Mon, 21 Dec 2015 14:24:13 +0530 Subject: phy: omap-usb2: use *syscon* framework API to power on/off the PHY Deprecate using phy-omap-control driver to power on/off the PHY, and use *syscon* framework to do the same. This handles powering on/off the PHY for the USB2 PHYs used in various TI SoCs. Signed-off-by: Kishon Vijay Abraham I --- include/linux/phy/omap_usb.h | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'include/linux') diff --git a/include/linux/phy/omap_usb.h b/include/linux/phy/omap_usb.h index dc2c541a619b..2e5fb870efa9 100644 --- a/include/linux/phy/omap_usb.h +++ b/include/linux/phy/omap_usb.h @@ -30,6 +30,12 @@ struct usb_dpll_params { u32 mf; }; +enum omap_usb_phy_type { + TYPE_USB2, /* USB2_PHY, power down in CONTROL_DEV_CONF */ + TYPE_DRA7USB2, /* USB2 PHY, power and power_aux e.g. DRA7 */ + TYPE_AM437USB2, /* USB2 PHY, power e.g. AM437x */ +}; + struct omap_usb { struct usb_phy phy; struct phy_companion *comparator; @@ -40,11 +46,20 @@ struct omap_usb { struct clk *wkupclk; struct clk *optclk; u8 flags; + enum omap_usb_phy_type type; + struct regmap *syscon_phy_power; /* ctrl. reg. acces */ + unsigned int power_reg; /* power reg. index within syscon */ + u32 mask; + u32 power_on; + u32 power_off; }; struct usb_phy_data { const char *label; u8 flags; + u32 mask; + u32 power_on; + u32 power_off; }; /* Driver Flags */ @@ -52,6 +67,14 @@ struct usb_phy_data { #define OMAP_USB2_HAS_SET_VBUS (1 << 1) #define OMAP_USB2_CALIBRATE_FALSE_DISCONNECT (1 << 2) +#define OMAP_DEV_PHY_PD BIT(0) +#define OMAP_USB2_PHY_PD BIT(28) + +#define AM437X_USB2_PHY_PD BIT(0) +#define AM437X_USB2_OTG_PD BIT(1) +#define AM437X_USB2_OTGVDET_EN BIT(19) +#define AM437X_USB2_OTGSESSEND_EN BIT(20) + #define phy_to_omapusb(x) container_of((x), struct omap_usb, phy) #if defined(CONFIG_OMAP_USB2) || defined(CONFIG_OMAP_USB2_MODULE) -- cgit v1.2.3 From 2048157ad02e65f6327118dd4a7b9c9f1fd12f77 Mon Sep 17 00:00:00 2001 From: Dexuan Cui Date: Mon, 21 Dec 2015 12:21:22 -0800 Subject: Drivers: hv: vmbus: fix the building warning with hyperv-keyboard With the recent change af3ff643ea91ba64dd8d0b1cbed54d44512f96cd (Drivers: hv: vmbus: Use uuid_le type consistently), we always get this warning: CC [M] drivers/input/serio/hyperv-keyboard.o drivers/input/serio/hyperv-keyboard.c:427:2: warning: missing braces around initializer [-Wmissing-braces] { HV_KBD_GUID, }, ^ drivers/input/serio/hyperv-keyboard.c:427:2: warning: (near initialization for .id_table[0].guid.b.) [-Wmissing-braces] The patch fixes the warning. Signed-off-by: Dexuan Cui Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- include/linux/hyperv.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index 179ff330af59..753dbad0bf94 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -1078,6 +1078,14 @@ u64 hv_do_hypercall(u64 control, void *input, void *output); .guid = UUID_LE(0xcfa8b69e, 0x5b4a, 0x4cc0, 0xb9, 0x8b, \ 0x8b, 0xa1, 0xa1, 0xf3, 0xf9, 0x5a) +/* + * Keyboard GUID + * {f912ad6d-2b17-48ea-bd65-f927a61c7684} + */ +#define HV_KBD_GUID \ + .guid = UUID_LE(0xf912ad6d, 0x2b17, 0x48ea, 0xbd, 0x65, \ + 0xf9, 0x27, 0xa6, 0x1c, 0x76, 0x84) + /* * VSS (Backup/Restore) GUID */ -- cgit v1.2.3 From 03a76b60f8ba27974e2d252bc555d2c103420e15 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Mon, 21 Dec 2015 15:13:33 -0700 Subject: vfio: Include No-IOMMU mode There is really no way to safely give a user full access to a DMA capable device without an IOMMU to protect the host system. There is also no way to provide DMA translation, for use cases such as device assignment to virtual machines. However, there are still those users that want userspace drivers even under those conditions. The UIO driver exists for this use case, but does not provide the degree of device access and programming that VFIO has. In an effort to avoid code duplication, this introduces a No-IOMMU mode for VFIO. This mode requires building VFIO with CONFIG_VFIO_NOIOMMU and enabling the "enable_unsafe_noiommu_mode" option on the vfio driver. This should make it very clear that this mode is not safe. Additionally, CAP_SYS_RAWIO privileges are necessary to work with groups and containers using this mode. Groups making use of this support are named /dev/vfio/noiommu-$GROUP and can only make use of the special VFIO_NOIOMMU_IOMMU for the container. Use of this mode, specifically binding a device without a native IOMMU group to a VFIO bus driver will taint the kernel and should therefore not be considered supported. This patch includes no-iommu support for the vfio-pci bus driver only. Signed-off-by: Alex Williamson Acked-by: Michael S. Tsirkin --- include/linux/vfio.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/vfio.h b/include/linux/vfio.h index ddb440975382..610a86a892b8 100644 --- a/include/linux/vfio.h +++ b/include/linux/vfio.h @@ -44,6 +44,9 @@ struct vfio_device_ops { void (*request)(void *device_data, unsigned int count); }; +extern struct iommu_group *vfio_iommu_group_get(struct device *dev); +extern void vfio_iommu_group_put(struct iommu_group *group, struct device *dev); + extern int vfio_add_group_dev(struct device *dev, const struct vfio_device_ops *ops, void *device_data); -- cgit v1.2.3 From 7d2c2acac577959dbbddefefa91d1ba1b80460b3 Mon Sep 17 00:00:00 2001 From: "Andrew F. Davis" Date: Mon, 14 Dec 2015 16:35:57 -0600 Subject: iio: Make IIO value formating function globally available. Make IIO value formating function globally available to allow IIO drivers to output values as the core does. Signed-off-by: Andrew F. Davis Signed-off-by: Jonathan Cameron --- include/linux/iio/iio.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index 19c94c9acc81..b5894118755f 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -636,6 +636,8 @@ static inline struct dentry *iio_get_debugfs_dentry(struct iio_dev *indio_dev) } #endif +ssize_t iio_format_value(char *buf, unsigned int type, int size, int *vals); + int iio_str_to_fixpoint(const char *str, int fract_mult, int *integer, int *fract); -- cgit v1.2.3 From 8a0859b65b06ea07461271ce4f1fe25b48d1ec55 Mon Sep 17 00:00:00 2001 From: "Du, Changbin" Date: Fri, 18 Dec 2015 15:36:40 +0800 Subject: usb: gadget: forbid queuing request to a disabled ep Queue a request to disabled ep doesn't make sense, and induce caller make mistakes. Here is a example for the android mtp gadget function driver. A mem corruption can happen on below senario. 1) On disconnect, mtp driver disable its EPs, 2) During send_file_work and receive_file_work, mtp queues a request to ep. (The mtp driver need improve its synchronization logic!) 3) mtp_function_unbind is invoked and all mtp requests are freed. 4) when udc process the request queued on step 2, will cause kernel NULL pointer dereference exception. Signed-off-by: Du, Changbin Signed-off-by: Felipe Balbi --- include/linux/usb/gadget.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 92467eea76de..d82d0068872b 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -402,6 +402,9 @@ static inline void usb_ep_free_request(struct usb_ep *ep, static inline int usb_ep_queue(struct usb_ep *ep, struct usb_request *req, gfp_t gfp_flags) { + if (WARN_ON_ONCE(!ep->enabled && ep->address)) + return -ESHUTDOWN; + return ep->ops->queue(ep, req, gfp_flags); } -- cgit v1.2.3 From de2dd0eb30af55d3893979d5641c50c7a8969c99 Mon Sep 17 00:00:00 2001 From: Zhao Qiang Date: Mon, 30 Nov 2015 10:48:52 +0800 Subject: genalloc:support memory-allocation with bytes-alignment to genalloc Bytes alignment is required to manage some special RAM, so add gen_pool_first_fit_align to genalloc, meanwhile add gen_pool_alloc_algo to pass algo in case user layer using more than one algo, and pass data to gen_pool_first_fit_align(modify gen_pool_alloc as a wrapper) Signed-off-by: Zhao Qiang Signed-off-by: Scott Wood --- include/linux/genalloc.h | 27 +++++++++++++++++++++++---- 1 file changed, 23 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/genalloc.h b/include/linux/genalloc.h index 7ff168d06967..3c676ce46ee0 100644 --- a/include/linux/genalloc.h +++ b/include/linux/genalloc.h @@ -30,10 +30,12 @@ #ifndef __GENALLOC_H__ #define __GENALLOC_H__ +#include #include struct device; struct device_node; +struct gen_pool; /** * Allocation callback function type definition @@ -47,7 +49,7 @@ typedef unsigned long (*genpool_algo_t)(unsigned long *map, unsigned long size, unsigned long start, unsigned int nr, - void *data); + void *data, struct gen_pool *pool); /* * General purpose special memory pool descriptor. @@ -75,6 +77,13 @@ struct gen_pool_chunk { unsigned long bits[0]; /* bitmap for allocating memory chunk */ }; +/* + * gen_pool data descriptor for gen_pool_first_fit_align. + */ +struct genpool_data_align { + int align; /* alignment by bytes for starting address */ +}; + extern struct gen_pool *gen_pool_create(int, int); extern phys_addr_t gen_pool_virt_to_phys(struct gen_pool *pool, unsigned long); extern int gen_pool_add_virt(struct gen_pool *, unsigned long, phys_addr_t, @@ -98,6 +107,8 @@ static inline int gen_pool_add(struct gen_pool *pool, unsigned long addr, } extern void gen_pool_destroy(struct gen_pool *); extern unsigned long gen_pool_alloc(struct gen_pool *, size_t); +extern unsigned long gen_pool_alloc_algo(struct gen_pool *, size_t, + genpool_algo_t algo, void *data); extern void *gen_pool_dma_alloc(struct gen_pool *pool, size_t size, dma_addr_t *dma); extern void gen_pool_free(struct gen_pool *, unsigned long, size_t); @@ -110,14 +121,22 @@ extern void gen_pool_set_algo(struct gen_pool *pool, genpool_algo_t algo, void *data); extern unsigned long gen_pool_first_fit(unsigned long *map, unsigned long size, - unsigned long start, unsigned int nr, void *data); + unsigned long start, unsigned int nr, void *data, + struct gen_pool *pool); + +extern unsigned long gen_pool_first_fit_align(unsigned long *map, + unsigned long size, unsigned long start, unsigned int nr, + void *data, struct gen_pool *pool); + extern unsigned long gen_pool_first_fit_order_align(unsigned long *map, unsigned long size, unsigned long start, unsigned int nr, - void *data); + void *data, struct gen_pool *pool); extern unsigned long gen_pool_best_fit(unsigned long *map, unsigned long size, - unsigned long start, unsigned int nr, void *data); + unsigned long start, unsigned int nr, void *data, + struct gen_pool *pool); + extern struct gen_pool *devm_gen_pool_create(struct device *dev, int min_alloc_order, int nid, const char *name); -- cgit v1.2.3 From b26981c8f743d3cb64a6907eb1f5c6c4ba6ca672 Mon Sep 17 00:00:00 2001 From: Zhao Qiang Date: Mon, 30 Nov 2015 10:48:53 +0800 Subject: genalloc:support allocating specific region Add new algo for genalloc, it reserve a specific region of memory Signed-off-by: Zhao Qiang Signed-off-by: Scott Wood --- include/linux/genalloc.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include/linux') diff --git a/include/linux/genalloc.h b/include/linux/genalloc.h index 3c676ce46ee0..29d4385903d4 100644 --- a/include/linux/genalloc.h +++ b/include/linux/genalloc.h @@ -84,6 +84,13 @@ struct genpool_data_align { int align; /* alignment by bytes for starting address */ }; +/* + * gen_pool data descriptor for gen_pool_fixed_alloc. + */ +struct genpool_data_fixed { + unsigned long offset; /* The offset of the specific region */ +}; + extern struct gen_pool *gen_pool_create(int, int); extern phys_addr_t gen_pool_virt_to_phys(struct gen_pool *pool, unsigned long); extern int gen_pool_add_virt(struct gen_pool *, unsigned long, phys_addr_t, @@ -124,6 +131,10 @@ extern unsigned long gen_pool_first_fit(unsigned long *map, unsigned long size, unsigned long start, unsigned int nr, void *data, struct gen_pool *pool); +extern unsigned long gen_pool_fixed_alloc(unsigned long *map, + unsigned long size, unsigned long start, unsigned int nr, + void *data, struct gen_pool *pool); + extern unsigned long gen_pool_first_fit_align(unsigned long *map, unsigned long size, unsigned long start, unsigned int nr, void *data, struct gen_pool *pool); -- cgit v1.2.3 From c3d4879e01bec484f50a78c108341f039d470e96 Mon Sep 17 00:00:00 2001 From: Scott Mayhew Date: Fri, 11 Dec 2015 16:45:58 -0500 Subject: sunrpc: Add a function to close temporary transports immediately Add a function svc_age_temp_xprts_now() to close temporary transports whose xpt_local matches the address passed in server_addr immediately instead of waiting for them to be closed by the timer function. The function is intended to be used by notifier_blocks that will be added to nfsd and lockd that will run when an ip address is deleted. This will eliminate the ACK storms and client hangs that occur in HA-NFS configurations where nfsd & lockd is left running on the cluster nodes all the time and the NFS 'service' is migrated back and forth within a short timeframe. Signed-off-by: Scott Mayhew Signed-off-by: J. Bruce Fields --- include/linux/sunrpc/svc_xprt.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/sunrpc/svc_xprt.h b/include/linux/sunrpc/svc_xprt.h index 78512cfe1fe6..b7dabc4baafd 100644 --- a/include/linux/sunrpc/svc_xprt.h +++ b/include/linux/sunrpc/svc_xprt.h @@ -128,6 +128,7 @@ struct svc_xprt *svc_find_xprt(struct svc_serv *serv, const char *xcl_name, const unsigned short port); int svc_xprt_names(struct svc_serv *serv, char *buf, const int buflen); void svc_add_new_perm_xprt(struct svc_serv *serv, struct svc_xprt *xprt); +void svc_age_temp_xprts_now(struct svc_serv *, struct sockaddr *); static inline void svc_xprt_get(struct svc_xprt *xprt) { -- cgit v1.2.3 From d8ce9bf5551bfea431893bdd0a943f24a5170828 Mon Sep 17 00:00:00 2001 From: Geliang Tang Date: Sun, 27 Dec 2015 17:25:20 +0800 Subject: HID: move to_hid_device() to hid.h to_hid_device() macro is defined in both hid-lg4ff.c and hid-logitech-hidpp.c. So I move it to include/linux/hid.h. Signed-off-by: Geliang Tang Signed-off-by: Jiri Kosina --- include/linux/hid.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/hid.h b/include/linux/hid.h index a6d7a3fc2cb3..1472026367ed 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -565,6 +565,9 @@ struct hid_device { /* device report descriptor */ wait_queue_head_t debug_wait; }; +#define to_hid_device(pdev) \ + container_of(pdev, struct hid_device, dev) + static inline void *hid_get_drvdata(struct hid_device *hdev) { return dev_get_drvdata(&hdev->dev); -- cgit v1.2.3 From ba91a96718d17160890e161f702db6e60747248a Mon Sep 17 00:00:00 2001 From: Geliang Tang Date: Sun, 27 Dec 2015 17:25:22 +0800 Subject: HID: add a new helper to_hid_driver() Add a new helper to_hid_driver() and use it in hid-core.c. Signed-off-by: Geliang Tang Signed-off-by: Jiri Kosina --- include/linux/hid.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/hid.h b/include/linux/hid.h index 1472026367ed..75b66eccc692 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -717,6 +717,9 @@ struct hid_driver { struct device_driver driver; }; +#define to_hid_driver(pdrv) \ + container_of(pdrv, struct hid_driver, driver) + /** * hid_ll_driver - low level driver callbacks * @start: called on probe to start the device -- cgit v1.2.3 From 9a4bf31d05a801e2358d96f69b39fb8ce2c69dd8 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 10 Dec 2015 10:41:58 -0500 Subject: nfs: add new tracepoint for pnfs_update_layout pnfs_update_layout is really the "nexus" of layout handling. If it returns NULL then we end up going through the MDS. This patch adds some tracepoints to that function that allow us to determine the cause when we end up going through the MDS unexpectedly. Signed-off-by: Jeff Layton Signed-off-by: Trond Myklebust --- include/linux/nfs4.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nfs4.h b/include/linux/nfs4.h index e7e78537aea2..0e30f2c5ff49 100644 --- a/include/linux/nfs4.h +++ b/include/linux/nfs4.h @@ -592,4 +592,18 @@ enum data_content4 { NFS4_CONTENT_HOLE = 1, }; +enum pnfs_update_layout_reason { + PNFS_UPDATE_LAYOUT_UNKNOWN = 0, + PNFS_UPDATE_LAYOUT_NO_PNFS, + PNFS_UPDATE_LAYOUT_RD_ZEROLEN, + PNFS_UPDATE_LAYOUT_MDSTHRESH, + PNFS_UPDATE_LAYOUT_NOMEM, + PNFS_UPDATE_LAYOUT_BULK_RECALL, + PNFS_UPDATE_LAYOUT_IO_TEST_FAIL, + PNFS_UPDATE_LAYOUT_FOUND_CACHED, + PNFS_UPDATE_LAYOUT_RETURN, + PNFS_UPDATE_LAYOUT_BLOCKED, + PNFS_UPDATE_LAYOUT_SEND_LAYOUTGET, +}; + #endif -- cgit v1.2.3 From 99ade3c71b1e40e7174d6527709399a87f3d05e0 Mon Sep 17 00:00:00 2001 From: Andrew Elble Date: Wed, 2 Dec 2015 09:39:51 -0500 Subject: nfs: machine credential support for additional operations Allow LAYOUTRETURN and DELEGRETURN to use machine credentials if the server supports it. Add request for OPEN_DOWNGRADE as the close path also uses that. Signed-off-by: Andrew Elble Signed-off-by: Trond Myklebust --- include/linux/nfs_fs_sb.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/nfs_fs_sb.h b/include/linux/nfs_fs_sb.h index 2469ab0bb3a1..7fcc13c8cf1f 100644 --- a/include/linux/nfs_fs_sb.h +++ b/include/linux/nfs_fs_sb.h @@ -102,6 +102,7 @@ struct nfs_client { #define NFS_SP4_MACH_CRED_STATEID 4 /* TEST_STATEID and FREE_STATEID */ #define NFS_SP4_MACH_CRED_WRITE 5 /* WRITE */ #define NFS_SP4_MACH_CRED_COMMIT 6 /* COMMIT */ +#define NFS_SP4_MACH_CRED_PNFS_CLEANUP 7 /* LAYOUTRETURN */ #endif /* CONFIG_NFS_V4 */ /* Our own IP address, as a null-terminated string. -- cgit v1.2.3 From d6c843b96e1cb5199147e3281a724e3c0b69a9ab Mon Sep 17 00:00:00 2001 From: Peng Tao Date: Sat, 5 Dec 2015 16:20:43 +0800 Subject: nfs: only remove page from mapping if launder_page fails Instead of dropping pages when write fails, only do it when we get fatal failure in launder_page write back. Signed-off-by: Peng Tao Signed-off-by: Trond Myklebust --- include/linux/nfs_fs.h | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index c0e961474a52..b88fc46cfbb8 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -517,12 +517,24 @@ extern int nfs_updatepage(struct file *, struct page *, unsigned int, unsigned */ extern int nfs_sync_inode(struct inode *inode); extern int nfs_wb_all(struct inode *inode); -extern int nfs_wb_page(struct inode *inode, struct page* page); +extern int nfs_wb_single_page(struct inode *inode, struct page *page, bool launder); extern int nfs_wb_page_cancel(struct inode *inode, struct page* page); extern int nfs_commit_inode(struct inode *, int); extern struct nfs_commit_data *nfs_commitdata_alloc(void); extern void nfs_commit_free(struct nfs_commit_data *data); +static inline int +nfs_wb_launder_page(struct inode *inode, struct page *page) +{ + return nfs_wb_single_page(inode, page, true); +} + +static inline int +nfs_wb_page(struct inode *inode, struct page *page) +{ + return nfs_wb_single_page(inode, page, false); +} + static inline int nfs_have_writebacks(struct inode *inode) { -- cgit v1.2.3 From 37e9ed22b1552fa94ee7db2901a5e7d8bdf60b15 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 22 Dec 2015 12:30:24 -0500 Subject: pNFS: Add flag to track if we've called nfs4_ff_layout_stat_io_start_read/write Signed-off-by: Trond Myklebust --- include/linux/nfs_xdr.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index 11bbae44f4cb..7b30ac0c7def 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -1375,6 +1375,7 @@ enum { NFS_IOHDR_ERROR = 0, NFS_IOHDR_EOF, NFS_IOHDR_REDO, + NFS_IOHDR_STAT, }; struct nfs_pgio_header { @@ -1454,6 +1455,7 @@ struct nfs_commit_data { const struct rpc_call_ops *mds_ops; const struct nfs_commit_completion_ops *completion_ops; int (*commit_done_cb) (struct rpc_task *task, struct nfs_commit_data *data); + unsigned long flags; }; struct nfs_pgio_completion_ops { -- cgit v1.2.3 From dc602dd706cb64036132a7903ead1c67d9a7bcb9 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 31 Dec 2015 11:44:06 -0500 Subject: NFS/pNFS: Fix up pNFS write reschedule layering violations and bugs The flexfiles layout in particular, seems to want to poke around in the O_DIRECT flags when retransmitting. This patch sets up an interface to allow it to call back into O_DIRECT to handle retransmission correctly. It also fixes a potential bug whereby we could change the behaviour of O_DIRECT if an error is already pending. Signed-off-by: Trond Myklebust --- include/linux/nfs_xdr.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index 11bbae44f4cb..e89dbb14138c 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -1460,6 +1460,7 @@ struct nfs_pgio_completion_ops { void (*error_cleanup)(struct list_head *head); void (*init_hdr)(struct nfs_pgio_header *hdr); void (*completion)(struct nfs_pgio_header *hdr); + void (*reschedule_io)(struct nfs_pgio_header *hdr); }; struct nfs_unlinkdata { -- cgit v1.2.3 From af7cf057933f01dc7f33ddfb5e436ad598ed17ad Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 29 Sep 2015 20:34:05 -0400 Subject: NFS: Allow multiple commit requests in flight per file Allow synchronous RPC calls to wait for pending RPC calls to finish, but also allow asynchronous ones to just fire off another commit. With this patch, the xfstests generic/074 test completes in 226s instead of 242s Signed-off-by: Trond Myklebust --- include/linux/nfs_fs.h | 1 - include/linux/nfs_xdr.h | 1 - 2 files changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index c0e961474a52..ebf0bd72a42b 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -216,7 +216,6 @@ struct nfs_inode { #define NFS_INO_FLUSHING (4) /* inode is flushing out data */ #define NFS_INO_FSCACHE (5) /* inode can be cached by FS-Cache */ #define NFS_INO_FSCACHE_LOCK (6) /* FS-Cache cookie management lock */ -#define NFS_INO_COMMIT (7) /* inode is committing unstable writes */ #define NFS_INO_LAYOUTCOMMIT (9) /* layoutcommit required */ #define NFS_INO_LAYOUTCOMMITTING (10) /* layoutcommit inflight */ #define NFS_INO_LAYOUTSTATS (11) /* layoutstats inflight */ diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index e89dbb14138c..a8905b7d4d7f 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -1423,7 +1423,6 @@ struct nfs_mds_commit_info { struct nfs_commit_data; struct nfs_inode; struct nfs_commit_completion_ops { - void (*error_cleanup) (struct nfs_inode *nfsi); void (*completion) (struct nfs_commit_data *data); }; -- cgit v1.2.3 From b20135d0b2431900a3a5395970ffb7e4f3767c8b Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 31 Dec 2015 09:28:06 -0500 Subject: NFSv4.1/pNFS: Don't queue up a new commit if the layout segment is invalid If the layout segment is invalid, then we should not be adding more write requests to the commit list. Instead, those writes should be replayed after requesting a new layout. Signed-off-by: Trond Myklebust --- include/linux/nfs_xdr.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index a8905b7d4d7f..bee3e60a7006 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -1420,10 +1420,12 @@ struct nfs_mds_commit_info { struct list_head list; }; +struct nfs_commit_info; struct nfs_commit_data; struct nfs_inode; struct nfs_commit_completion_ops { void (*completion) (struct nfs_commit_data *data); + void (*resched_write) (struct nfs_commit_info *, struct nfs_page *); }; struct nfs_commit_info { -- cgit v1.2.3 From d1b98c23f7547cc37c8f230acbedb26f0d47e9e1 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Fri, 1 Jan 2016 08:53:37 +0100 Subject: quota: constify qtree_fmt_operations structures The qtree_fmt_operations structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall Signed-off-by: Jan Kara --- include/linux/dqblk_qtree.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/dqblk_qtree.h b/include/linux/dqblk_qtree.h index 82a16527b367..ff8b55359648 100644 --- a/include/linux/dqblk_qtree.h +++ b/include/linux/dqblk_qtree.h @@ -34,7 +34,7 @@ struct qtree_mem_dqinfo { unsigned int dqi_entry_size; /* Size of quota entry in quota file */ unsigned int dqi_usable_bs; /* Space usable in block for quota data */ unsigned int dqi_qtree_depth; /* Precomputed depth of quota tree */ - struct qtree_fmt_operations *dqi_ops; /* Operations for entry manipulation */ + const struct qtree_fmt_operations *dqi_ops; /* Operations for entry manipulation */ }; int qtree_write_dquot(struct qtree_mem_dqinfo *info, struct dquot *dquot); -- cgit v1.2.3 From 4acad4aae10d1fa79a075b38b5c73772c44f576c Mon Sep 17 00:00:00 2001 From: Michal Suchanek Date: Wed, 2 Dec 2015 10:38:21 +0000 Subject: spi: expose master transfer size limitation. On some SPI controllers it is not feasible to transfer arbitrary amount of data at once. When the limit on transfer size is a few kilobytes at least it makes sense to use the SPI hardware rather than reverting to gpio driver. The protocol drivers need a way to check that they do not sent overly long messages, though. Signed-off-by: Michal Suchanek Signed-off-by: Mark Brown --- include/linux/spi/spi.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'include/linux') diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index cce80e6dc7d1..3eebc6c235fb 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -425,6 +425,12 @@ struct spi_master { #define SPI_MASTER_MUST_RX BIT(3) /* requires rx */ #define SPI_MASTER_MUST_TX BIT(4) /* requires tx */ + /* + * on some hardware transfer size may be constrained + * the limit may depend on device transfer settings + */ + size_t (*max_transfer_size)(struct spi_device *spi); + /* lock and mutex for SPI bus locking */ spinlock_t bus_lock_spinlock; struct mutex bus_lock_mutex; @@ -832,6 +838,15 @@ extern int spi_async(struct spi_device *spi, struct spi_message *message); extern int spi_async_locked(struct spi_device *spi, struct spi_message *message); +static inline size_t +spi_max_transfer_size(struct spi_device *spi) +{ + struct spi_master *master = spi->master; + if (!master->max_transfer_size) + return SIZE_MAX; + return master->max_transfer_size(spi); +} + /*---------------------------------------------------------------------------*/ /* All these synchronous SPI transfer routines are utilities layered -- cgit v1.2.3 From 6e9411923b8f4c0e568cbae0f35b7ee4eb989914 Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Wed, 30 Dec 2015 20:32:03 +0100 Subject: mtd: nand: return consistent error codes in ecc.correct() implementations The error code returned by the ecc.correct() are not consistent over the all implementations. Document the expected behavior in include/linux/mtd/nand.h and fix offending implementations. [Brian: this looks like a bugfix for the ECC reporting in the bf5xx_nand driver, but we haven't seen any testing results for it] Signed-off-by: Boris Brezillon Tested-by: Franklin S Cooper Jr. Signed-off-by: Brian Norris --- include/linux/mtd/nand.h | 8 +++++++- include/linux/mtd/nand_bch.h | 2 +- 2 files changed, 8 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 3e92be1d2d43..518958115182 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -456,7 +456,13 @@ struct nand_hw_control { * @hwctl: function to control hardware ECC generator. Must only * be provided if an hardware ECC is available * @calculate: function for ECC calculation or readback from ECC hardware - * @correct: function for ECC correction, matching to ECC generator (sw/hw) + * @correct: function for ECC correction, matching to ECC generator (sw/hw). + * Should return a positive number representing the number of + * corrected bitflips, -EBADMSG if the number of bitflips exceed + * ECC strength, or any other error code if the error is not + * directly related to correction. + * If -EBADMSG is returned the input buffers should be left + * untouched. * @read_page_raw: function to read a raw page without ECC. This function * should hide the specific layout used by the ECC * controller and always return contiguous in-band and diff --git a/include/linux/mtd/nand_bch.h b/include/linux/mtd/nand_bch.h index 74acf5367556..fb0bc3420a10 100644 --- a/include/linux/mtd/nand_bch.h +++ b/include/linux/mtd/nand_bch.h @@ -55,7 +55,7 @@ static inline int nand_bch_correct_data(struct mtd_info *mtd, unsigned char *buf, unsigned char *read_ecc, unsigned char *calc_ecc) { - return -1; + return -ENOTSUPP; } static inline struct nand_bch_control * -- cgit v1.2.3 From 40cbe6eee97b706f27bcc4c6aa1018bbe4f1e577 Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Wed, 30 Dec 2015 20:32:04 +0100 Subject: mtd: nand: use nand_check_erased_ecc_chunk in default ECC read functions The default NAND read functions are relying on the underlying controller driver to correct bitflips, but some of those controllers cannot properly fix bitflips in erased pages. Check for bitflips in erased pages in default core functions if the driver delegated the this check by setting the NAND_ECC_GENERIC_ERASED_CHECK flag. Signed-off-by: Boris Brezillon Tested-by: Franklin S Cooper Jr. Signed-off-by: Brian Norris --- include/linux/mtd/nand.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 518958115182..86487dbe7358 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -129,6 +129,14 @@ typedef enum { /* Enable Hardware ECC before syndrome is read back from flash */ #define NAND_ECC_READSYN 2 +/* + * Enable generic NAND 'page erased' check. This check is only done when + * ecc.correct() returns -EBADMSG. + * Set this flag if your implementation does not fix bitflips in erased + * pages and you want to rely on the default implementation. + */ +#define NAND_ECC_GENERIC_ERASED_CHECK BIT(0) + /* Bit mask for flags passed to do_nand_read_ecc */ #define NAND_GET_DEVICE 0x80 @@ -451,6 +459,7 @@ struct nand_hw_control { * @total: total number of ECC bytes per page * @prepad: padding information for syndrome based ECC generators * @postpad: padding information for syndrome based ECC generators + * @options: ECC specific options (see NAND_ECC_XXX flags defined above) * @layout: ECC layout control struct pointer * @priv: pointer to private ECC control data * @hwctl: function to control hardware ECC generator. Must only @@ -500,6 +509,7 @@ struct nand_ecc_ctrl { int strength; int prepad; int postpad; + unsigned int options; struct nand_ecclayout *layout; void *priv; void (*hwctl)(struct mtd_info *mtd, int mode); -- cgit v1.2.3 From 2a297450dd188a5d4e5e428c189b2de54f9073ba Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Wed, 23 Dec 2015 22:25:13 +0100 Subject: lockd: constify nlmsvc_binding structure The nlmsvc_binding structure is never modified, so declare it as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall Signed-off-by: J. Bruce Fields --- include/linux/lockd/bind.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/lockd/bind.h b/include/linux/lockd/bind.h index 4d24d64578c4..140edab64446 100644 --- a/include/linux/lockd/bind.h +++ b/include/linux/lockd/bind.h @@ -29,7 +29,7 @@ struct nlmsvc_binding { void (*fclose)(struct file *); }; -extern struct nlmsvc_binding * nlmsvc_ops; +extern const struct nlmsvc_binding *nlmsvc_ops; /* * Similar to nfs_client_initdata, but without the NFS-specific -- cgit v1.2.3 From d39ddbd9ef70949bb78283a067e1b3366111dd90 Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Thu, 10 Dec 2015 09:00:39 +0100 Subject: mtd: nand: add helpers to access ->priv Add two helpers to access the field reserved for private controller data. This makes it clearer what this field is reserved for and ease future refactoring. Signed-off-by: Boris Brezillon Signed-off-by: Brian Norris --- include/linux/mtd/nand.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 86487dbe7358..bdd68e22b5a5 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -755,6 +755,16 @@ static inline struct mtd_info *nand_to_mtd(struct nand_chip *chip) return &chip->mtd; } +static inline void *nand_get_controller_data(struct nand_chip *chip) +{ + return chip->priv; +} + +static inline void nand_set_controller_data(struct nand_chip *chip, void *priv) +{ + chip->priv = priv; +} + /* * NAND Flash Manufacturer ID Codes */ -- cgit v1.2.3 From 210c7c1750fdf769647d1d526c9ea34c412c9eee Mon Sep 17 00:00:00 2001 From: Benjamin Coddington Date: Wed, 6 Jan 2016 10:40:18 -0500 Subject: NFS: Use wait_on_atomic_t() for unlock after readahead The use of wait_on_atomic_t() for waiting on I/O to complete before unlocking allows us to git rid of the NFS_IO_INPROGRESS flag, and thus the nfs_iocounter's flags member, and finally the nfs_iocounter altogether. The count of I/O is moved to the lock context, and the counter increment/decrement functions become simple enough to open-code. Signed-off-by: Benjamin Coddington [Trond: Fix up conflict with existing function nfs_wait_atomic_killable()] Signed-off-by: Trond Myklebust --- include/linux/nfs_fs.h | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index 9eee972863a7..196aaceafda7 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -60,18 +60,12 @@ struct nfs_lockowner { pid_t l_pid; }; -#define NFS_IO_INPROGRESS 0 -struct nfs_io_counter { - unsigned long flags; - atomic_t io_count; -}; - struct nfs_lock_context { atomic_t count; struct list_head list; struct nfs_open_context *open_context; struct nfs_lockowner lockowner; - struct nfs_io_counter io_count; + atomic_t io_count; }; struct nfs4_state; -- cgit v1.2.3 From 5a023cdba50c5f5f2bc351783b3131699deb3937 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 30 Nov 2015 10:20:29 -0800 Subject: block: enable dax for raw block devices If an application wants exclusive access to all of the persistent memory provided by an NVDIMM namespace it can use this raw-block-dax facility to forgo establishing a filesystem. This capability is targeted primarily to hypervisors wanting to provision persistent memory for guests. It can be disabled / enabled dynamically via the new BLKDAXSET ioctl. Cc: Jeff Moyer Cc: Christoph Hellwig Cc: Dave Chinner Cc: Andrew Morton Cc: Ross Zwisler Reported-by: kbuild test robot Reviewed-by: Jan Kara Signed-off-by: Dan Williams --- include/linux/fs.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 3aa514254161..96fabc93b583 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -482,6 +482,9 @@ struct block_device { int bd_fsfreeze_count; /* Mutex for freeze */ struct mutex bd_fsfreeze_mutex; +#ifdef CONFIG_FS_DAX + int bd_map_count; +#endif }; /* @@ -2264,6 +2267,14 @@ extern struct super_block *freeze_bdev(struct block_device *); extern void emergency_thaw_all(void); extern int thaw_bdev(struct block_device *bdev, struct super_block *sb); extern int fsync_bdev(struct block_device *); +#ifdef CONFIG_FS_DAX +extern bool blkdev_dax_capable(struct block_device *bdev); +#else +static inline bool blkdev_dax_capable(struct block_device *bdev) +{ + return false; +} +#endif extern struct super_block *blockdev_superblock; -- cgit v1.2.3 From 9e0e252a048b0ba5066f0dc15c3b2468ffe5c422 Mon Sep 17 00:00:00 2001 From: Vishal Verma Date: Thu, 24 Dec 2015 19:20:32 -0700 Subject: badblocks: Add core badblock management code Take the core badblocks implementation from md, and make it generally available. This follows the same style as kernel implementations of linked lists, rb-trees etc, where you can have a structure that can be embedded anywhere, and accessor functions to manipulate the data. The only changes in this copy of the code are ones to generalize function/variable names from md-specific ones. Also add init and free functions. Signed-off-by: Vishal Verma Signed-off-by: Dan Williams --- include/linux/badblocks.h | 53 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 53 insertions(+) create mode 100644 include/linux/badblocks.h (limited to 'include/linux') diff --git a/include/linux/badblocks.h b/include/linux/badblocks.h new file mode 100644 index 000000000000..929344630b51 --- /dev/null +++ b/include/linux/badblocks.h @@ -0,0 +1,53 @@ +#ifndef _LINUX_BADBLOCKS_H +#define _LINUX_BADBLOCKS_H + +#include +#include +#include +#include + +#define BB_LEN_MASK (0x00000000000001FFULL) +#define BB_OFFSET_MASK (0x7FFFFFFFFFFFFE00ULL) +#define BB_ACK_MASK (0x8000000000000000ULL) +#define BB_MAX_LEN 512 +#define BB_OFFSET(x) (((x) & BB_OFFSET_MASK) >> 9) +#define BB_LEN(x) (((x) & BB_LEN_MASK) + 1) +#define BB_ACK(x) (!!((x) & BB_ACK_MASK)) +#define BB_MAKE(a, l, ack) (((a)<<9) | ((l)-1) | ((u64)(!!(ack)) << 63)) + +/* Bad block numbers are stored sorted in a single page. + * 64bits is used for each block or extent. + * 54 bits are sector number, 9 bits are extent size, + * 1 bit is an 'acknowledged' flag. + */ +#define MAX_BADBLOCKS (PAGE_SIZE/8) + +struct badblocks { + int count; /* count of bad blocks */ + int unacked_exist; /* there probably are unacknowledged + * bad blocks. This is only cleared + * when a read discovers none + */ + int shift; /* shift from sectors to block size + * a -ve shift means badblocks are + * disabled.*/ + u64 *page; /* badblock list */ + int changed; + seqlock_t lock; + sector_t sector; + sector_t size; /* in sectors */ +}; + +int badblocks_check(struct badblocks *bb, sector_t s, int sectors, + sector_t *first_bad, int *bad_sectors); +int badblocks_set(struct badblocks *bb, sector_t s, int sectors, + int acknowledged); +int badblocks_clear(struct badblocks *bb, sector_t s, int sectors); +void ack_all_badblocks(struct badblocks *bb); +ssize_t badblocks_show(struct badblocks *bb, char *page, int unack); +ssize_t badblocks_store(struct badblocks *bb, const char *page, size_t len, + int unack); +int badblocks_init(struct badblocks *bb, int enable); +void badblocks_free(struct badblocks *bb); + +#endif -- cgit v1.2.3 From 99e6608c9e7414ae4f2168df8bf8fae3eb49e41f Mon Sep 17 00:00:00 2001 From: Vishal Verma Date: Sat, 9 Jan 2016 08:36:51 -0800 Subject: block: Add badblock management for gendisks NVDIMM devices, which can behave more like DRAM rather than block devices, may develop bad cache lines, or 'poison'. A block device exposed by the pmem driver can then consume poison via a read (or write), and cause a machine check. On platforms without machine check recovery features, this would mean a crash. The block device maintaining a runtime list of all known sectors that have poison can directly avoid this, and also provide a path forward to enable proper handling/recovery for DAX faults on such a device. Use the new badblock management interfaces to add a badblocks list to gendisks. Signed-off-by: Vishal Verma Signed-off-by: Dan Williams --- include/linux/genhd.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/genhd.h b/include/linux/genhd.h index 847cc1d91634..0bbec6880051 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -162,6 +162,7 @@ struct disk_part_tbl { }; struct disk_events; +struct badblocks; #if defined(CONFIG_BLK_DEV_INTEGRITY) @@ -213,6 +214,7 @@ struct gendisk { struct kobject integrity_kobj; #endif /* CONFIG_BLK_DEV_INTEGRITY */ int node_id; + struct badblocks *bb; }; static inline struct gendisk *part_to_disk(struct hd_struct *part) @@ -433,6 +435,11 @@ extern void add_disk(struct gendisk *disk); extern void del_gendisk(struct gendisk *gp); extern struct gendisk *get_gendisk(dev_t dev, int *partno); extern struct block_device *bdget_disk(struct gendisk *disk, int partno); +int disk_alloc_badblocks(struct gendisk *disk); +extern int disk_check_badblocks(struct gendisk *disk, sector_t s, int sectors, + sector_t *first_bad, int *bad_sectors); +extern int disk_set_badblocks(struct gendisk *disk, sector_t s, int sectors); +extern int disk_clear_badblocks(struct gendisk *disk, sector_t s, int sectors); extern void set_device_ro(struct block_device *bdev, int flag); extern void set_disk_ro(struct gendisk *disk, int flag); -- cgit v1.2.3 From 0caeef63e6d2f866d85bb507bf63e0ce8ec91cef Mon Sep 17 00:00:00 2001 From: Vishal Verma Date: Thu, 24 Dec 2015 19:21:43 -0700 Subject: libnvdimm: Add a poison list and export badblocks During region creation, perform Address Range Scrubs (ARS) for the SPA (System Physical Address) ranges to retrieve known poison locations from firmware. Add a new data structure 'nd_poison' which is used as a list in nvdimm_bus to store these poison locations. When creating a pmem namespace, if there is any known poison associated with its physical address space, convert the poison ranges to bad sectors that are exposed using the badblocks interface. Signed-off-by: Vishal Verma Signed-off-by: Dan Williams --- include/linux/libnvdimm.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/libnvdimm.h b/include/linux/libnvdimm.h index 3f021dc5da8c..bed40dff0e86 100644 --- a/include/linux/libnvdimm.h +++ b/include/linux/libnvdimm.h @@ -116,6 +116,7 @@ static inline struct nd_blk_region_desc *to_blk_region_desc( } +int nvdimm_bus_add_poison(struct nvdimm_bus *nvdimm_bus, u64 addr, u64 length); struct nvdimm_bus *__nvdimm_bus_register(struct device *parent, struct nvdimm_bus_descriptor *nfit_desc, struct module *module); #define nvdimm_bus_register(parent, desc) \ -- cgit v1.2.3 From d3b407fb3f782bd915db64e266010ea30a2d381e Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 6 Jan 2016 12:19:22 -0800 Subject: badblocks: rename badblocks_free to badblocks_exit For symmetry with badblocks_init() make it clear that this path only destroys incremental allocations of a badblocks instance, and does not free the badblocks instance itself. Signed-off-by: Dan Williams --- include/linux/badblocks.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/badblocks.h b/include/linux/badblocks.h index 929344630b51..2d98c026c57f 100644 --- a/include/linux/badblocks.h +++ b/include/linux/badblocks.h @@ -48,6 +48,6 @@ ssize_t badblocks_show(struct badblocks *bb, char *page, int unack); ssize_t badblocks_store(struct badblocks *bb, const char *page, size_t len, int unack); int badblocks_init(struct badblocks *bb, int enable); -void badblocks_free(struct badblocks *bb); +void badblocks_exit(struct badblocks *bb); #endif -- cgit v1.2.3 From 16263ff6c72eb4cc00aa287230144dda12ccad12 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 4 Jan 2016 23:50:23 -0800 Subject: block, badblocks: introduce devm_init_badblocks Provide a devres interface for initializing a badblocks instance. The pmem driver has several scenarios where it will be beneficial to have this structure automatically freed when the device is disabled / fails probe. Signed-off-by: Dan Williams --- include/linux/badblocks.h | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/badblocks.h b/include/linux/badblocks.h index 2d98c026c57f..c3bdf8c59480 100644 --- a/include/linux/badblocks.h +++ b/include/linux/badblocks.h @@ -2,6 +2,7 @@ #define _LINUX_BADBLOCKS_H #include +#include #include #include #include @@ -23,6 +24,7 @@ #define MAX_BADBLOCKS (PAGE_SIZE/8) struct badblocks { + struct device *dev; /* set by devm_init_badblocks */ int count; /* count of bad blocks */ int unacked_exist; /* there probably are unacknowledged * bad blocks. This is only cleared @@ -49,5 +51,15 @@ ssize_t badblocks_store(struct badblocks *bb, const char *page, size_t len, int unack); int badblocks_init(struct badblocks *bb, int enable); void badblocks_exit(struct badblocks *bb); - +struct device; +int devm_init_badblocks(struct device *dev, struct badblocks *bb); +static inline void devm_exit_badblocks(struct device *dev, struct badblocks *bb) +{ + if (bb->dev != dev) { + dev_WARN_ONCE(dev, 1, "%s: badblocks instance not associated\n", + __func__); + return; + } + badblocks_exit(bb); +} #endif -- cgit v1.2.3 From 55f5560d8c18fe33fc169f8d244a9247dcac7612 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 5 Jan 2016 00:28:18 -0800 Subject: block: kill disk_{check|set|clear|alloc}_badblocks These actions are completely managed by a block driver or can use the badblocks api directly. Signed-off-by: Dan Williams --- include/linux/genhd.h | 5 ----- 1 file changed, 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/genhd.h b/include/linux/genhd.h index 0bbec6880051..5c706765404a 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -435,11 +435,6 @@ extern void add_disk(struct gendisk *disk); extern void del_gendisk(struct gendisk *gp); extern struct gendisk *get_gendisk(dev_t dev, int *partno); extern struct block_device *bdget_disk(struct gendisk *disk, int partno); -int disk_alloc_badblocks(struct gendisk *disk); -extern int disk_check_badblocks(struct gendisk *disk, sector_t s, int sectors, - sector_t *first_bad, int *bad_sectors); -extern int disk_set_badblocks(struct gendisk *disk, sector_t s, int sectors); -extern int disk_clear_badblocks(struct gendisk *disk, sector_t s, int sectors); extern void set_device_ro(struct block_device *bdev, int flag); extern void set_disk_ro(struct gendisk *disk, int flag); -- cgit v1.2.3 From f199d39349beabcb1a374cb02e0845a0ae84f3fd Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Mon, 14 Dec 2015 10:19:11 +0000 Subject: mfd: arizona: Add device tree binding to specify mono outputs Add device tree bindings to support specifying outputs from the chip as mono outputs. Whilst we are doing it change the out_mono pdata from a bool to an int, because Sparse gets upset about using ARRAY_SIZE on bools. Signed-off-by: Charles Keepax Signed-off-by: Lee Jones --- include/linux/mfd/arizona/pdata.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mfd/arizona/pdata.h b/include/linux/mfd/arizona/pdata.h index 57b45caaea80..64faeeff698c 100644 --- a/include/linux/mfd/arizona/pdata.h +++ b/include/linux/mfd/arizona/pdata.h @@ -171,7 +171,7 @@ struct arizona_pdata { int inmode[ARIZONA_MAX_INPUT]; /** Mode for outputs */ - bool out_mono[ARIZONA_MAX_OUTPUT]; + int out_mono[ARIZONA_MAX_OUTPUT]; /** PDM speaker mute setting */ unsigned int spk_mute[ARIZONA_MAX_PDM_SPK]; -- cgit v1.2.3 From c698d639f72b55686ec3518d2bc8dc5f2eca9354 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Sun, 13 Dec 2015 15:33:19 -0500 Subject: i2c: create builtin_i2c_driver to avoid registration boilerplate In commit f309d4443130bf814e991f836e919dca22df37ae ("platform_device: better support builtin boilerplate avoidance") we introduced the builtin_driver macro. Here we use that support and extend it to I2C driver registration, so where a driver is clearly non-modular and builtin-only, we can register it in a similar fashion. And existing code that is clearly non-modular can be updated with the simple mapping of module_i2c_driver(...) ---> builtin_i2c_driver(...) We've essentially cloned the former to make the latter, and taken out the remove/module_exit parts since those never get used in a non-modular build of the code. A similar thing was done in commit b4eb6cdbbd13698704863f680c643c569909e1c2 ("PCI: Add builtin_pci_driver() to avoid registration boilerplate"). Signed-off-by: Paul Gortmaker Signed-off-by: Wolfram Sang --- include/linux/i2c.h | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/i2c.h b/include/linux/i2c.h index bc2b19ad9357..200cf13b00f6 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -655,7 +655,7 @@ static inline int i2c_adapter_id(struct i2c_adapter *adap) } /** - * module_i2c_driver() - Helper macro for registering a I2C driver + * module_i2c_driver() - Helper macro for registering a modular I2C driver * @__i2c_driver: i2c_driver struct * * Helper macro for I2C drivers which do not do anything special in module @@ -666,6 +666,17 @@ static inline int i2c_adapter_id(struct i2c_adapter *adap) module_driver(__i2c_driver, i2c_add_driver, \ i2c_del_driver) +/** + * builtin_i2c_driver() - Helper macro for registering a builtin I2C driver + * @__i2c_driver: i2c_driver struct + * + * Helper macro for I2C drivers which do not do anything special in their + * init. This eliminates a lot of boilerplate. Each driver may only + * use this macro once, and calling it replaces device_initcall(). + */ +#define builtin_i2c_driver(__i2c_driver) \ + builtin_driver(__i2c_driver, i2c_add_driver) + #endif /* I2C */ #if IS_ENABLED(CONFIG_OF) -- cgit v1.2.3 From c510eff6bebaa244e577b8f499e86606b5e5d4c7 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 14 Jan 2016 15:16:59 -0800 Subject: fsnotify: destroy marks with call_srcu instead of dedicated thread At the time that this code was originally written, call_srcu didn't exist, so this thread was required to ensure that we waited for that SRCU grace period to settle before finally freeing the object. It does exist now however and we can much more efficiently use call_srcu to handle this. That also allows us to potentially use srcu_barrier to ensure that they are all of the callbacks have run before proceeding. In order to conserve space, we union the rcu_head with the g_list. This will be necessary for nfsd which will allocate marks from a dedicated slabcache. We have to be able to ensure that all of the objects are destroyed before destroying the cache. That's fairly Signed-off-by: Jeff Layton Cc: Eric Paris Reviewed-by: Jan Kara Cc: "Paul E. McKenney" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/fsnotify_backend.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h index 533c4408529a..6b7e89f45aa4 100644 --- a/include/linux/fsnotify_backend.h +++ b/include/linux/fsnotify_backend.h @@ -220,7 +220,10 @@ struct fsnotify_mark { /* List of marks by group->i_fsnotify_marks. Also reused for queueing * mark into destroy_list when it's waiting for the end of SRCU period * before it can be freed. [group->mark_mutex] */ - struct list_head g_list; + union { + struct list_head g_list; + struct rcu_head g_rcu; + }; /* Protects inode / mnt pointers, flags, masks */ spinlock_t lock; /* List of marks for inode / vfsmount [obj_lock] */ -- cgit v1.2.3 From 2bd03e49d66775da8cebdcc8d5bec7d68512ae87 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 14 Jan 2016 15:17:53 -0800 Subject: include/linux/dcache.h: remove semicolons from HASH_LEN_DECLARE A little cleanup - the invocation site provdes the semicolon. Cc: Rasmus Villemoes Cc: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/dcache.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/dcache.h b/include/linux/dcache.h index d67ae119cf4e..7781ce110503 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -27,10 +27,10 @@ struct vfsmount; /* The hash is always the low bits of hash_len */ #ifdef __LITTLE_ENDIAN - #define HASH_LEN_DECLARE u32 hash; u32 len; + #define HASH_LEN_DECLARE u32 hash; u32 len #define bytemask_from_count(cnt) (~(~0ul << (cnt)*8)) #else - #define HASH_LEN_DECLARE u32 len; u32 hash; + #define HASH_LEN_DECLARE u32 len; u32 hash #define bytemask_from_count(cnt) (~(~0ul >> (cnt)*8)) #endif -- cgit v1.2.3 From 20b5c30398639b458371c228abfda829854b61c5 Mon Sep 17 00:00:00 2001 From: Vladimir Davydov Date: Thu, 14 Jan 2016 15:18:08 -0800 Subject: Revert "gfp: add __GFP_NOACCOUNT" This reverts commit 8f4fc071b192 ("gfp: add __GFP_NOACCOUNT"). Black-list kmem accounting policy (aka __GFP_NOACCOUNT) turned out to be fragile and difficult to maintain, because there seem to be many more allocations that should not be accounted than those that should be. Besides, false accounting an allocation might result in much worse consequences than not accounting at all, namely increased memory consumption due to pinned dead kmem caches. So it was decided to switch to the white-list policy. This patch reverts bits introducing the black-list policy. The white-list policy will be introduced later in the series. Signed-off-by: Vladimir Davydov Acked-by: Johannes Weiner Cc: Michal Hocko Cc: Tejun Heo Cc: Greg Thelen Cc: Christoph Lameter Cc: Pekka Enberg Cc: David Rientjes Cc: Joonsoo Kim Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/gfp.h | 2 -- include/linux/memcontrol.h | 2 -- 2 files changed, 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/gfp.h b/include/linux/gfp.h index 8942af0813e3..075b014448f5 100644 --- a/include/linux/gfp.h +++ b/include/linux/gfp.h @@ -30,7 +30,6 @@ struct vm_area_struct; #define ___GFP_HARDWALL 0x20000u #define ___GFP_THISNODE 0x40000u #define ___GFP_ATOMIC 0x80000u -#define ___GFP_NOACCOUNT 0x100000u #define ___GFP_NOTRACK 0x200000u #define ___GFP_DIRECT_RECLAIM 0x400000u #define ___GFP_OTHER_NODE 0x800000u @@ -104,7 +103,6 @@ struct vm_area_struct; #define __GFP_HIGH ((__force gfp_t)___GFP_HIGH) #define __GFP_MEMALLOC ((__force gfp_t)___GFP_MEMALLOC) #define __GFP_NOMEMALLOC ((__force gfp_t)___GFP_NOMEMALLOC) -#define __GFP_NOACCOUNT ((__force gfp_t)___GFP_NOACCOUNT) /* * Reclaim modifiers diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index cd0e2413c358..2103f36b3bd3 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -773,8 +773,6 @@ static inline bool __memcg_kmem_bypass(gfp_t gfp) { if (!memcg_kmem_enabled()) return true; - if (gfp & __GFP_NOACCOUNT) - return true; if (in_interrupt() || (!current->mm) || (current->flags & PF_KTHREAD)) return true; return false; -- cgit v1.2.3 From a9bb7e620efdfd29b6d1c238041173e411670996 Mon Sep 17 00:00:00 2001 From: Vladimir Davydov Date: Thu, 14 Jan 2016 15:18:12 -0800 Subject: memcg: only account kmem allocations marked as __GFP_ACCOUNT Black-list kmem accounting policy (aka __GFP_NOACCOUNT) turned out to be fragile and difficult to maintain, because there seem to be many more allocations that should not be accounted than those that should be. Besides, false accounting an allocation might result in much worse consequences than not accounting at all, namely increased memory consumption due to pinned dead kmem caches. So this patch switches kmem accounting to the white-policy: now only those kmem allocations that are marked as __GFP_ACCOUNT are accounted to memcg. Currently, no kmem allocations are marked like this. The following patches will mark several kmem allocations that are known to be easily triggered from userspace and therefore should be accounted to memcg. Signed-off-by: Vladimir Davydov Acked-by: Johannes Weiner Acked-by: Michal Hocko Cc: Tejun Heo Cc: Greg Thelen Cc: Christoph Lameter Cc: Pekka Enberg Cc: David Rientjes Cc: Joonsoo Kim Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/gfp.h | 9 +++++++++ include/linux/memcontrol.h | 2 ++ 2 files changed, 11 insertions(+) (limited to 'include/linux') diff --git a/include/linux/gfp.h b/include/linux/gfp.h index 075b014448f5..1dd59abe541d 100644 --- a/include/linux/gfp.h +++ b/include/linux/gfp.h @@ -30,6 +30,7 @@ struct vm_area_struct; #define ___GFP_HARDWALL 0x20000u #define ___GFP_THISNODE 0x40000u #define ___GFP_ATOMIC 0x80000u +#define ___GFP_ACCOUNT 0x100000u #define ___GFP_NOTRACK 0x200000u #define ___GFP_DIRECT_RECLAIM 0x400000u #define ___GFP_OTHER_NODE 0x800000u @@ -72,11 +73,15 @@ struct vm_area_struct; * * __GFP_THISNODE forces the allocation to be satisified from the requested * node with no fallbacks or placement policy enforcements. + * + * __GFP_ACCOUNT causes the allocation to be accounted to kmemcg (only relevant + * to kmem allocations). */ #define __GFP_RECLAIMABLE ((__force gfp_t)___GFP_RECLAIMABLE) #define __GFP_WRITE ((__force gfp_t)___GFP_WRITE) #define __GFP_HARDWALL ((__force gfp_t)___GFP_HARDWALL) #define __GFP_THISNODE ((__force gfp_t)___GFP_THISNODE) +#define __GFP_ACCOUNT ((__force gfp_t)___GFP_ACCOUNT) /* * Watermark modifiers -- controls access to emergency reserves @@ -195,6 +200,9 @@ struct vm_area_struct; * GFP_KERNEL is typical for kernel-internal allocations. The caller requires * ZONE_NORMAL or a lower zone for direct access but can direct reclaim. * + * GFP_KERNEL_ACCOUNT is the same as GFP_KERNEL, except the allocation is + * accounted to kmemcg. + * * GFP_NOWAIT is for kernel allocations that should not stall for direct * reclaim, start physical IO or use any filesystem callback. * @@ -234,6 +242,7 @@ struct vm_area_struct; */ #define GFP_ATOMIC (__GFP_HIGH|__GFP_ATOMIC|__GFP_KSWAPD_RECLAIM) #define GFP_KERNEL (__GFP_RECLAIM | __GFP_IO | __GFP_FS) +#define GFP_KERNEL_ACCOUNT (GFP_KERNEL | __GFP_ACCOUNT) #define GFP_NOWAIT (__GFP_KSWAPD_RECLAIM) #define GFP_NOIO (__GFP_RECLAIM) #define GFP_NOFS (__GFP_RECLAIM | __GFP_IO) diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index 2103f36b3bd3..c9d9a8e7b45f 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -773,6 +773,8 @@ static inline bool __memcg_kmem_bypass(gfp_t gfp) { if (!memcg_kmem_enabled()) return true; + if (!(gfp & __GFP_ACCOUNT)) + return true; if (in_interrupt() || (!current->mm) || (current->flags & PF_KTHREAD)) return true; return false; -- cgit v1.2.3 From 230e9fc2860450fbb1f33bdcf9093d92d7d91f5b Mon Sep 17 00:00:00 2001 From: Vladimir Davydov Date: Thu, 14 Jan 2016 15:18:15 -0800 Subject: slab: add SLAB_ACCOUNT flag Currently, if we want to account all objects of a particular kmem cache, we have to pass __GFP_ACCOUNT to each kmem_cache_alloc call, which is inconvenient. This patch introduces SLAB_ACCOUNT flag which if passed to kmem_cache_create will force accounting for every allocation from this cache even if __GFP_ACCOUNT is not passed. This patch does not make any of the existing caches use this flag - it will be done later in the series. Note, a cache with SLAB_ACCOUNT cannot be merged with a cache w/o SLAB_ACCOUNT, because merged caches share the same kmem_cache struct and hence cannot have different sets of SLAB_* flags. Thus using this flag will probably reduce the number of merged slabs even if kmem accounting is not used (only compiled in). Signed-off-by: Vladimir Davydov Suggested-by: Tejun Heo Acked-by: Johannes Weiner Acked-by: Michal Hocko Cc: Greg Thelen Cc: Christoph Lameter Cc: Pekka Enberg Cc: David Rientjes Cc: Joonsoo Kim Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/memcontrol.h | 15 +++++++-------- include/linux/slab.h | 5 +++++ 2 files changed, 12 insertions(+), 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index c9d9a8e7b45f..5c97265c1c6e 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -766,15 +766,13 @@ static inline int memcg_cache_id(struct mem_cgroup *memcg) return memcg ? memcg->kmemcg_id : -1; } -struct kmem_cache *__memcg_kmem_get_cache(struct kmem_cache *cachep); +struct kmem_cache *__memcg_kmem_get_cache(struct kmem_cache *cachep, gfp_t gfp); void __memcg_kmem_put_cache(struct kmem_cache *cachep); -static inline bool __memcg_kmem_bypass(gfp_t gfp) +static inline bool __memcg_kmem_bypass(void) { if (!memcg_kmem_enabled()) return true; - if (!(gfp & __GFP_ACCOUNT)) - return true; if (in_interrupt() || (!current->mm) || (current->flags & PF_KTHREAD)) return true; return false; @@ -791,7 +789,9 @@ static inline bool __memcg_kmem_bypass(gfp_t gfp) static __always_inline int memcg_kmem_charge(struct page *page, gfp_t gfp, int order) { - if (__memcg_kmem_bypass(gfp)) + if (__memcg_kmem_bypass()) + return 0; + if (!(gfp & __GFP_ACCOUNT)) return 0; return __memcg_kmem_charge(page, gfp, order); } @@ -810,16 +810,15 @@ static __always_inline void memcg_kmem_uncharge(struct page *page, int order) /** * memcg_kmem_get_cache: selects the correct per-memcg cache for allocation * @cachep: the original global kmem cache - * @gfp: allocation flags. * * All memory allocated from a per-memcg cache is charged to the owner memcg. */ static __always_inline struct kmem_cache * memcg_kmem_get_cache(struct kmem_cache *cachep, gfp_t gfp) { - if (__memcg_kmem_bypass(gfp)) + if (__memcg_kmem_bypass()) return cachep; - return __memcg_kmem_get_cache(cachep); + return __memcg_kmem_get_cache(cachep, gfp); } static __always_inline void memcg_kmem_put_cache(struct kmem_cache *cachep) diff --git a/include/linux/slab.h b/include/linux/slab.h index 2037a861e367..3ffee7422012 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -86,6 +86,11 @@ #else # define SLAB_FAILSLAB 0x00000000UL #endif +#ifdef CONFIG_MEMCG_KMEM +# define SLAB_ACCOUNT 0x04000000UL /* Account to memcg */ +#else +# define SLAB_ACCOUNT 0x00000000UL +#endif /* The following flags affect the page allocator grouping pages by mobility */ #define SLAB_RECLAIM_ACCOUNT 0x00020000UL /* Objects are reclaimable */ -- cgit v1.2.3 From 5d097056c9a017a3b720849efb5432f37acabbac Mon Sep 17 00:00:00 2001 From: Vladimir Davydov Date: Thu, 14 Jan 2016 15:18:21 -0800 Subject: kmemcg: account certain kmem allocations to memcg Mark those kmem allocations that are known to be easily triggered from userspace as __GFP_ACCOUNT/SLAB_ACCOUNT, which makes them accounted to memcg. For the list, see below: - threadinfo - task_struct - task_delay_info - pid - cred - mm_struct - vm_area_struct and vm_region (nommu) - anon_vma and anon_vma_chain - signal_struct - sighand_struct - fs_struct - files_struct - fdtable and fdtable->full_fds_bits - dentry and external_name - inode for all filesystems. This is the most tedious part, because most filesystems overwrite the alloc_inode method. The list is far from complete, so feel free to add more objects. Nevertheless, it should be close to "account everything" approach and keep most workloads within bounds. Malevolent users will be able to breach the limit, but this was possible even with the former "account everything" approach (simply because it did not account everything in fact). [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Vladimir Davydov Acked-by: Johannes Weiner Acked-by: Michal Hocko Cc: Tejun Heo Cc: Greg Thelen Cc: Christoph Lameter Cc: Pekka Enberg Cc: David Rientjes Cc: Joonsoo Kim Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/thread_info.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/thread_info.h b/include/linux/thread_info.h index ff307b548ed3..b4c2a485b28a 100644 --- a/include/linux/thread_info.h +++ b/include/linux/thread_info.h @@ -56,9 +56,10 @@ extern long do_no_restart_syscall(struct restart_block *parm); #ifdef __KERNEL__ #ifdef CONFIG_DEBUG_STACK_USAGE -# define THREADINFO_GFP (GFP_KERNEL | __GFP_NOTRACK | __GFP_ZERO) +# define THREADINFO_GFP (GFP_KERNEL_ACCOUNT | __GFP_NOTRACK | \ + __GFP_ZERO) #else -# define THREADINFO_GFP (GFP_KERNEL | __GFP_NOTRACK) +# define THREADINFO_GFP (GFP_KERNEL_ACCOUNT | __GFP_NOTRACK) #endif /* -- cgit v1.2.3 From 8f235d1a3eb7198affe7cadf676a10afb8a46a1a Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Thu, 14 Jan 2016 15:18:33 -0800 Subject: mm: add PHYS_PFN, use it in __phys_to_pfn() __phys_to_pfn and __pfn_to_phys are symmetric, PHYS_PFN and PFN_PHYS are semmetric: - y = (phys_addr_t)x << PAGE_SHIFT - y >> PAGE_SHIFT = (phys_add_t)x - (unsigned long)(y >> PAGE_SHIFT) = x [akpm@linux-foundation.org: use macro arg name `x'] [arnd@arndb.de: include linux/pfn.h for PHYS_PFN definition] Signed-off-by: Chen Gang Cc: Oleg Nesterov Signed-off-by: Arnd Bergmann Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/pfn.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/pfn.h b/include/linux/pfn.h index 7646637221f3..97f3e88aead4 100644 --- a/include/linux/pfn.h +++ b/include/linux/pfn.h @@ -9,5 +9,6 @@ #define PFN_UP(x) (((x) + PAGE_SIZE-1) >> PAGE_SHIFT) #define PFN_DOWN(x) ((x) >> PAGE_SHIFT) #define PFN_PHYS(x) ((phys_addr_t)(x) << PAGE_SHIFT) +#define PHYS_PFN(x) ((unsigned long)((x) >> PAGE_SHIFT)) #endif -- cgit v1.2.3 From 4a8c7bb59ac85b038c29adf6d32ff56e11fbb267 Mon Sep 17 00:00:00 2001 From: Nathan Zimmer Date: Thu, 14 Jan 2016 15:18:36 -0800 Subject: mm/mempolicy.c: convert the shared_policy lock to a rwlock When running the SPECint_rate gcc on some very large boxes it was noticed that the system was spending lots of time in mpol_shared_policy_lookup(). The gamess benchmark can also show it and is what I mostly used to chase down the issue since the setup for that I found to be easier. To be clear the binaries were on tmpfs because of disk I/O requirements. We then used text replication to avoid icache misses and having all the copies banging on the memory where the instruction code resides. This results in us hitting a bottleneck in mpol_shared_policy_lookup() since lookup is serialised by the shared_policy lock. I have only reproduced this on very large (3k+ cores) boxes. The problem starts showing up at just a few hundred ranks getting worse until it threatens to livelock once it gets large enough. For example on the gamess benchmark at 128 ranks this area consumes only ~1% of time, at 512 ranks it consumes nearly 13%, and at 2k ranks it is over 90%. To alleviate the contention in this area I converted the spinlock to an rwlock. This allows a large number of lookups to happen simultaneously. The results were quite good reducing this consumtion at max ranks to around 2%. [akpm@linux-foundation.org: tidy up code comments] Signed-off-by: Nathan Zimmer Acked-by: David Rientjes Acked-by: Vlastimil Babka Cc: Nadia Yvette Chambers Cc: Naoya Horiguchi Cc: Mel Gorman Cc: "Aneesh Kumar K.V" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mempolicy.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mempolicy.h b/include/linux/mempolicy.h index 3d385c81c153..2696c1f05ed1 100644 --- a/include/linux/mempolicy.h +++ b/include/linux/mempolicy.h @@ -122,7 +122,7 @@ struct sp_node { struct shared_policy { struct rb_root root; - spinlock_t lock; + rwlock_t lock; }; int vma_dup_policy(struct vm_area_struct *src, struct vm_area_struct *dst); -- cgit v1.2.3 From 719ff32162865522273d8fa975bf99b32875738b Mon Sep 17 00:00:00 2001 From: Yaowei Bai Date: Thu, 14 Jan 2016 15:18:51 -0800 Subject: include/linux/hugetlb.h: is_file_hugepages() can be boolean Make is_file_hugepages() return bool to improve readability due to this particular function only using either one or zero as its return value. This patch also removed the if condition to make is_file_hugepages return directly. No functional change. Signed-off-by: Yaowei Bai Acked-by: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/hugetlb.h | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h index b0eb06423d5e..e76574d8f9b5 100644 --- a/include/linux/hugetlb.h +++ b/include/linux/hugetlb.h @@ -263,20 +263,18 @@ struct file *hugetlb_file_setup(const char *name, size_t size, vm_flags_t acct, struct user_struct **user, int creat_flags, int page_size_log); -static inline int is_file_hugepages(struct file *file) +static inline bool is_file_hugepages(struct file *file) { if (file->f_op == &hugetlbfs_file_operations) - return 1; - if (is_file_shm_hugepages(file)) - return 1; + return true; - return 0; + return is_file_shm_hugepages(file); } #else /* !CONFIG_HUGETLBFS */ -#define is_file_hugepages(file) 0 +#define is_file_hugepages(file) false static inline struct file * hugetlb_file_setup(const char *name, size_t size, vm_flags_t acctflag, struct user_struct **user, int creat_flags, -- cgit v1.2.3 From b4ad0c7e004a2cc0e52790eff72f5176b59ca386 Mon Sep 17 00:00:00 2001 From: Yaowei Bai Date: Thu, 14 Jan 2016 15:18:54 -0800 Subject: mm/memblock.c: memblock_is_memory()/reserved() can be boolean Make memblock_is_memory() and memblock_is_reserved return bool to improve readability due to these particular functions only using either one or zero as their return value. No functional change. Signed-off-by: Yaowei Bai Acked-by: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/memblock.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/memblock.h b/include/linux/memblock.h index fec66f86eeff..3a092fba2eb2 100644 --- a/include/linux/memblock.h +++ b/include/linux/memblock.h @@ -325,10 +325,10 @@ phys_addr_t memblock_mem_size(unsigned long limit_pfn); phys_addr_t memblock_start_of_DRAM(void); phys_addr_t memblock_end_of_DRAM(void); void memblock_enforce_memory_limit(phys_addr_t memory_limit); -int memblock_is_memory(phys_addr_t addr); +bool memblock_is_memory(phys_addr_t addr); int memblock_is_map_memory(phys_addr_t addr); int memblock_is_region_memory(phys_addr_t base, phys_addr_t size); -int memblock_is_reserved(phys_addr_t addr); +bool memblock_is_reserved(phys_addr_t addr); bool memblock_is_region_reserved(phys_addr_t base, phys_addr_t size); extern void __memblock_dump_all(void); -- cgit v1.2.3 From 06640290bfc6688062387f915c5df094e9872133 Mon Sep 17 00:00:00 2001 From: Yaowei Bai Date: Thu, 14 Jan 2016 15:18:57 -0800 Subject: include/linux/mmzone.h: remove unused is_unevictable_lru() Since commit a0b8cab3b9b2 ("mm: remove lru parameter from __pagevec_lru_add and remove parts of pagevec API") there's no user of this function anymore, so remove it. Signed-off-by: Yaowei Bai Acked-by: Michal Hocko Acked-by: Hillf Danton Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mmzone.h | 5 ----- 1 file changed, 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index e23a9e704536..996384672c73 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -195,11 +195,6 @@ static inline int is_active_lru(enum lru_list lru) return (lru == LRU_ACTIVE_ANON || lru == LRU_ACTIVE_FILE); } -static inline int is_unevictable_lru(enum lru_list lru) -{ - return (lru == LRU_UNEVICTABLE); -} - struct zone_reclaim_stat { /* * The pageout code in vmscan.c keeps track of how many of the -- cgit v1.2.3 From c00eb15a8914b8ba84032a36044a5aaf7f71709d Mon Sep 17 00:00:00 2001 From: Yaowei Bai Date: Thu, 14 Jan 2016 15:19:00 -0800 Subject: mm/zonelist: enumerate zonelists array index Hardcoding index to zonelists array in gfp_zonelist() is not a good idea, let's enumerate it to improve readability. No functional change. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix CONFIG_NUMA=n build] [n-horiguchi@ah.jp.nec.com: fix warning in comparing enumerator] Signed-off-by: Yaowei Bai Cc: Michal Hocko Cc: David Rientjes Signed-off-by: Naoya Horiguchi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/gfp.h | 9 +++++---- include/linux/mmzone.h | 20 +++++++++----------- 2 files changed, 14 insertions(+), 15 deletions(-) (limited to 'include/linux') diff --git a/include/linux/gfp.h b/include/linux/gfp.h index 1dd59abe541d..91f74e741aa2 100644 --- a/include/linux/gfp.h +++ b/include/linux/gfp.h @@ -384,10 +384,11 @@ static inline enum zone_type gfp_zone(gfp_t flags) static inline int gfp_zonelist(gfp_t flags) { - if (IS_ENABLED(CONFIG_NUMA) && unlikely(flags & __GFP_THISNODE)) - return 1; - - return 0; +#ifdef CONFIG_NUMA + if (unlikely(flags & __GFP_THISNODE)) + return ZONELIST_NOFALLBACK; +#endif + return ZONELIST_FALLBACK; } /* diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index 996384672c73..12c98dfc31b1 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -571,19 +571,17 @@ static inline bool zone_is_empty(struct zone *zone) /* Maximum number of zones on a zonelist */ #define MAX_ZONES_PER_ZONELIST (MAX_NUMNODES * MAX_NR_ZONES) +enum { + ZONELIST_FALLBACK, /* zonelist with fallback */ #ifdef CONFIG_NUMA - -/* - * The NUMA zonelists are doubled because we need zonelists that restrict the - * allocations to a single node for __GFP_THISNODE. - * - * [0] : Zonelist with fallback - * [1] : No fallback (__GFP_THISNODE) - */ -#define MAX_ZONELISTS 2 -#else -#define MAX_ZONELISTS 1 + /* + * The NUMA zonelists are doubled because we need zonelists that + * restrict the allocations to a single node for __GFP_THISNODE. + */ + ZONELIST_NOFALLBACK, /* zonelist without fallback (__GFP_THISNODE) */ #endif + MAX_ZONELISTS +}; /* * This struct contains information about a zone in a zonelist. It is stored -- cgit v1.2.3 From 5b80287a65da927742c6d43b1369bd5ed133aad1 Mon Sep 17 00:00:00 2001 From: Yaowei Bai Date: Thu, 14 Jan 2016 15:19:11 -0800 Subject: mm/mmzone.c: memmap_valid_within() can be boolean Make memmap_valid_within return bool due to this particular function only using either one or zero as its return value. No functional change. Signed-off-by: Yaowei Bai Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mmzone.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index 12c98dfc31b1..3b6fb71bbeb3 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -1200,13 +1200,13 @@ unsigned long __init node_memmap_size_bytes(int, unsigned long, unsigned long); * the zone and PFN linkages are still valid. This is expensive, but walkers * of the full memmap are extremely rare. */ -int memmap_valid_within(unsigned long pfn, +bool memmap_valid_within(unsigned long pfn, struct page *page, struct zone *zone); #else -static inline int memmap_valid_within(unsigned long pfn, +static inline bool memmap_valid_within(unsigned long pfn, struct page *page, struct zone *zone) { - return 1; + return true; } #endif /* CONFIG_ARCH_HAS_HOLES_MEMORYMODEL */ -- cgit v1.2.3 From 6a15a37097c7e02390bb08d83dac433c9f10144f Mon Sep 17 00:00:00 2001 From: Vlastimil Babka Date: Thu, 14 Jan 2016 15:19:20 -0800 Subject: mm, proc: reduce cost of /proc/pid/smaps for shmem mappings The previous patch has improved swap accounting for shmem mapping, which however made /proc/pid/smaps more expensive for shmem mappings, as we consult the radix tree for each pte_none entry, so the overal complexity is O(n*log(n)). We can reduce this significantly for mappings that cannot contain COWed pages, because then we can either use the statistics tha shmem object itself tracks (if the mapping contains the whole object, or the swap usage of the whole object is zero), or use the radix tree iterator, which is much more effective than repeated find_get_entry() calls. This patch therefore introduces a function shmem_swap_usage(vma) and makes /proc/pid/smaps use it when possible. Only for writable private mappings of shmem objects (i.e. tmpfs files) with the shmem object itself (partially) swapped outwe have to resort to the find_get_entry() approach. Hopefully such mappings are relatively uncommon. To demonstrate the diference, I have measured this on a process that creates a 2GB mapping and dirties single pages with a stride of 2MB, and time how long does it take to cat /proc/pid/smaps of this process 100 times. Private writable mapping of a /dev/shm/file (the most complex case): real 0m3.831s user 0m0.180s sys 0m3.212s Shared mapping of an almost full mapping of a partially swapped /dev/shm/file (which needs to employ the radix tree iterator). real 0m1.351s user 0m0.096s sys 0m0.768s Same, but with /dev/shm/file not swapped (so no radix tree walk needed) real 0m0.935s user 0m0.128s sys 0m0.344s Private anonymous mapping: real 0m0.949s user 0m0.116s sys 0m0.348s The cost is now much closer to the private anonymous mapping case, unless the shmem mapping is private and writable. Signed-off-by: Vlastimil Babka Cc: Hugh Dickins Cc: Jerome Marchand Cc: Konstantin Khlebnikov Acked-by: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/shmem_fs.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/shmem_fs.h b/include/linux/shmem_fs.h index 50777b5b1e4c..bd58be5e7a2a 100644 --- a/include/linux/shmem_fs.h +++ b/include/linux/shmem_fs.h @@ -60,6 +60,8 @@ extern struct page *shmem_read_mapping_page_gfp(struct address_space *mapping, extern void shmem_truncate_range(struct inode *inode, loff_t start, loff_t end); extern int shmem_unuse(swp_entry_t entry, struct page *page); +extern unsigned long shmem_swap_usage(struct vm_area_struct *vma); + static inline struct page *shmem_read_mapping_page( struct address_space *mapping, pgoff_t index) { -- cgit v1.2.3 From 48131e03ca4ed71d73fbe55c311a258c6fa2a090 Mon Sep 17 00:00:00 2001 From: Vlastimil Babka Date: Thu, 14 Jan 2016 15:19:23 -0800 Subject: mm, proc: reduce cost of /proc/pid/smaps for unpopulated shmem mappings Following the previous patch, further reduction of /proc/pid/smaps cost is possible for private writable shmem mappings with unpopulated areas where the page walk invokes the .pte_hole function. We can use radix tree iterator for each such area instead of calling find_get_entry() in a loop. This is possible at the extra maintenance cost of introducing another shmem function shmem_partial_swap_usage(). To demonstrate the diference, I have measured this on a process that creates a private writable 2GB mapping of a partially swapped out /dev/shm/file (which cannot employ the optimizations from the prvious patch) and doesn't populate it at all. I time how long does it take to cat /proc/pid/smaps of this process 100 times. Before this patch: real 0m3.831s user 0m0.180s sys 0m3.212s After this patch: real 0m1.176s user 0m0.180s sys 0m0.684s The time is similar to the case where a radix tree iterator is employed on the whole mapping. Signed-off-by: Vlastimil Babka Cc: Hugh Dickins Cc: Jerome Marchand Cc: Konstantin Khlebnikov Acked-by: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/shmem_fs.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/shmem_fs.h b/include/linux/shmem_fs.h index bd58be5e7a2a..a43f41cb3c43 100644 --- a/include/linux/shmem_fs.h +++ b/include/linux/shmem_fs.h @@ -61,6 +61,8 @@ extern void shmem_truncate_range(struct inode *inode, loff_t start, loff_t end); extern int shmem_unuse(swp_entry_t entry, struct page *page); extern unsigned long shmem_swap_usage(struct vm_area_struct *vma); +extern unsigned long shmem_partial_swap_usage(struct address_space *mapping, + pgoff_t start, pgoff_t end); static inline struct page *shmem_read_mapping_page( struct address_space *mapping, pgoff_t index) -- cgit v1.2.3 From eca56ff906bdd0239485e8b47154a6e73dd9a2f3 Mon Sep 17 00:00:00 2001 From: Jerome Marchand Date: Thu, 14 Jan 2016 15:19:26 -0800 Subject: mm, shmem: add internal shmem resident memory accounting Currently looking at /proc//status or statm, there is no way to distinguish shmem pages from pages mapped to a regular file (shmem pages are mapped to /dev/zero), even though their implication in actual memory use is quite different. The internal accounting currently counts shmem pages together with regular files. As a preparation to extend the userspace interfaces, this patch adds MM_SHMEMPAGES counter to mm_rss_stat to account for shmem pages separately from MM_FILEPAGES. The next patch will expose it to userspace - this patch doesn't change the exported values yet, by adding up MM_SHMEMPAGES to MM_FILEPAGES at places where MM_FILEPAGES was used before. The only user-visible change after this patch is the OOM killer message that separates the reported "shmem-rss" from "file-rss". [vbabka@suse.cz: forward-porting, tweak changelog] Signed-off-by: Jerome Marchand Signed-off-by: Vlastimil Babka Acked-by: Konstantin Khlebnikov Acked-by: Michal Hocko Acked-by: Hugh Dickins Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mm.h | 18 +++++++++++++++++- include/linux/mm_types.h | 7 ++++--- 2 files changed, 21 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mm.h b/include/linux/mm.h index 00bad7793788..a8ab1fc0e9bc 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1361,10 +1361,26 @@ static inline void dec_mm_counter(struct mm_struct *mm, int member) atomic_long_dec(&mm->rss_stat.count[member]); } +/* Optimized variant when page is already known not to be PageAnon */ +static inline int mm_counter_file(struct page *page) +{ + if (PageSwapBacked(page)) + return MM_SHMEMPAGES; + return MM_FILEPAGES; +} + +static inline int mm_counter(struct page *page) +{ + if (PageAnon(page)) + return MM_ANONPAGES; + return mm_counter_file(page); +} + static inline unsigned long get_mm_rss(struct mm_struct *mm) { return get_mm_counter(mm, MM_FILEPAGES) + - get_mm_counter(mm, MM_ANONPAGES); + get_mm_counter(mm, MM_ANONPAGES) + + get_mm_counter(mm, MM_SHMEMPAGES); } static inline unsigned long get_mm_hiwater_rss(struct mm_struct *mm) diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index f8d1492a114f..207890be93c8 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -369,9 +369,10 @@ struct core_state { }; enum { - MM_FILEPAGES, - MM_ANONPAGES, - MM_SWAPENTS, + MM_FILEPAGES, /* Resident file mapping pages */ + MM_ANONPAGES, /* Resident anonymous pages */ + MM_SWAPENTS, /* Anonymous swap entries */ + MM_SHMEMPAGES, /* Resident shared memory pages */ NR_MM_COUNTERS }; -- cgit v1.2.3 From 244d63ee345bd9d45c87f665ef5e3f7bcd5db45b Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Thu, 14 Jan 2016 15:19:35 -0800 Subject: mm, vmalloc: remove VM_VPAGES VM_VPAGES is unnecessary, it's easier to check is_vmalloc_addr() when reading /proc/vmallocinfo. [akpm@linux-foundation.org: remove VM_VPAGES reference via kvfree()] Signed-off-by: David Rientjes Cc: Tetsuo Handa Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/vmalloc.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h index 3bff87a25a42..d1f1d338af20 100644 --- a/include/linux/vmalloc.h +++ b/include/linux/vmalloc.h @@ -14,7 +14,6 @@ struct vm_area_struct; /* vma defining user mapping in mm_types.h */ #define VM_ALLOC 0x00000002 /* vmalloc() */ #define VM_MAP 0x00000004 /* vmap()ed pages */ #define VM_USERMAP 0x00000008 /* suitable for remap_vmalloc_range */ -#define VM_VPAGES 0x00000010 /* buffer for pages was vmalloc'ed */ #define VM_UNINITIALIZED 0x00000020 /* vm_struct is not fully initialized */ #define VM_NO_GUARD 0x00000040 /* don't add guard page */ #define VM_KASAN 0x00000080 /* has allocated kasan shadow memory */ -- cgit v1.2.3 From 9ee11ba4251dddf1b0e507d184b25b1bd7820773 Mon Sep 17 00:00:00 2001 From: Vladimir Davydov Date: Thu, 14 Jan 2016 15:19:41 -0800 Subject: memcg: do not allow to disable tcp accounting after limit is set There are two bits defined for cg_proto->flags - MEMCG_SOCK_ACTIVATED and MEMCG_SOCK_ACTIVE - both are set in tcp_update_limit, but the former is never cleared while the latter can be cleared by unsetting the limit. This allows to disable tcp socket accounting for new sockets after it was enabled by writing -1 to memory.kmem.tcp.limit_in_bytes while still guaranteeing that memcg_socket_limit_enabled static key will be decremented on memcg destruction. This functionality looks dubious, because it is not clear what a use case would be. By enabling tcp accounting a user accepts the price. If they then find the performance degradation unacceptable, they can always restart their workload with tcp accounting disabled. It does not seem there is any need to flip it while the workload is running. Besides, it contradicts to how kmem accounting API works: writing whatever to memory.kmem.limit_in_bytes enables kmem accounting for the cgroup in question, after which it cannot be disabled. Therefore one might expect that writing -1 to memory.kmem.tcp.limit_in_bytes just enables socket accounting w/o limiting it, which might be useful by itself, but it isn't true. Since this API peculiarity is not documented anywhere, I propose to drop it. This will allow to simplify the code by dropping cg_proto->flags. Signed-off-by: Vladimir Davydov Cc: Johannes Weiner Cc: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/memcontrol.h | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) (limited to 'include/linux') diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index 5c97265c1c6e..78a1ec2e23fc 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -85,22 +85,12 @@ enum mem_cgroup_events_target { MEM_CGROUP_NTARGETS, }; -/* - * Bits in struct cg_proto.flags - */ -enum cg_proto_flags { - /* Currently active and new sockets should be assigned to cgroups */ - MEMCG_SOCK_ACTIVE, - /* It was ever activated; we must disarm static keys on destruction */ - MEMCG_SOCK_ACTIVATED, -}; - struct cg_proto { struct page_counter memory_allocated; /* Current allocated memory. */ struct percpu_counter sockets_allocated; /* Current number of sockets. */ int memory_pressure; + bool active; long sysctl_mem[3]; - unsigned long flags; /* * memcg field is used to find which memcg we belong directly * Each memcg struct can hold more than one cg_proto, so container_of -- cgit v1.2.3 From d07e22597d1d355829b7b18ac19afa912cf758d1 Mon Sep 17 00:00:00 2001 From: Daniel Cashman Date: Thu, 14 Jan 2016 15:19:53 -0800 Subject: mm: mmap: add new /proc tunable for mmap_base ASLR Address Space Layout Randomization (ASLR) provides a barrier to exploitation of user-space processes in the presence of security vulnerabilities by making it more difficult to find desired code/data which could help an attack. This is done by adding a random offset to the location of regions in the process address space, with a greater range of potential offset values corresponding to better protection/a larger search-space for brute force, but also to greater potential for fragmentation. The offset added to the mmap_base address, which provides the basis for the majority of the mappings for a process, is set once on process exec in arch_pick_mmap_layout() and is done via hard-coded per-arch values, which reflect, hopefully, the best compromise for all systems. The trade-off between increased entropy in the offset value generation and the corresponding increased variability in address space fragmentation is not absolute, however, and some platforms may tolerate higher amounts of entropy. This patch introduces both new Kconfig values and a sysctl interface which may be used to change the amount of entropy used for offset generation on a system. The direct motivation for this change was in response to the libstagefright vulnerabilities that affected Android, specifically to information provided by Google's project zero at: http://googleprojectzero.blogspot.com/2015/09/stagefrightened.html The attack presented therein, by Google's project zero, specifically targeted the limited randomness used to generate the offset added to the mmap_base address in order to craft a brute-force-based attack. Concretely, the attack was against the mediaserver process, which was limited to respawning every 5 seconds, on an arm device. The hard-coded 8 bits used resulted in an average expected success rate of defeating the mmap ASLR after just over 10 minutes (128 tries at 5 seconds a piece). With this patch, and an accompanying increase in the entropy value to 16 bits, the same attack would take an average expected time of over 45 hours (32768 tries), which makes it both less feasible and more likely to be noticed. The introduced Kconfig and sysctl options are limited by per-arch minimum and maximum values, the minimum of which was chosen to match the current hard-coded value and the maximum of which was chosen so as to give the greatest flexibility without generating an invalid mmap_base address, generally a 3-4 bits less than the number of bits in the user-space accessible virtual address space. When decided whether or not to change the default value, a system developer should consider that mmap_base address could be placed anywhere up to 2^(value) bits away from the non-randomized location, which would introduce variable-sized areas above and below the mmap_base address such that the maximum vm_area_struct size may be reduced, preventing very large allocations. This patch (of 4): ASLR only uses as few as 8 bits to generate the random offset for the mmap base address on 32 bit architectures. This value was chosen to prevent a poorly chosen value from dividing the address space in such a way as to prevent large allocations. This may not be an issue on all platforms. Allow the specification of a minimum number of bits so that platforms desiring greater ASLR protection may determine where to place the trade-off. Signed-off-by: Daniel Cashman Cc: Russell King Acked-by: Kees Cook Cc: Ingo Molnar Cc: Jonathan Corbet Cc: Don Zickus Cc: Eric W. Biederman Cc: Heinrich Schuchardt Cc: Josh Poimboeuf Cc: Kirill A. Shutemov Cc: Naoya Horiguchi Cc: Andrea Arcangeli Cc: Mel Gorman Cc: Thomas Gleixner Cc: David Rientjes Cc: Mark Salyzyn Cc: Jeff Vander Stoep Cc: Nick Kralevich Cc: Catalin Marinas Cc: Will Deacon Cc: "H. Peter Anvin" Cc: Hector Marco-Gisbert Cc: Borislav Petkov Cc: Ralf Baechle Cc: Heiko Carstens Cc: Martin Schwidefsky Cc: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mm.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mm.h b/include/linux/mm.h index a8ab1fc0e9bc..d396753c0577 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -51,6 +51,17 @@ extern int sysctl_legacy_va_layout; #define sysctl_legacy_va_layout 0 #endif +#ifdef CONFIG_HAVE_ARCH_MMAP_RND_BITS +extern const int mmap_rnd_bits_min; +extern const int mmap_rnd_bits_max; +extern int mmap_rnd_bits __read_mostly; +#endif +#ifdef CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS +extern const int mmap_rnd_compat_bits_min; +extern const int mmap_rnd_compat_bits_max; +extern int mmap_rnd_compat_bits __read_mostly; +#endif + #include #include #include -- cgit v1.2.3 From c20cd45eb01748f0fba77a504f956b000df4ea73 Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Thu, 14 Jan 2016 15:20:12 -0800 Subject: mm: allow GFP_{FS,IO} for page_cache_read page cache allocation page_cache_read has been historically using page_cache_alloc_cold to allocate a new page. This means that mapping_gfp_mask is used as the base for the gfp_mask. Many filesystems are setting this mask to GFP_NOFS to prevent from fs recursion issues. page_cache_read is called from the vm_operations_struct::fault() context during the page fault. This context doesn't need the reclaim protection normally. ceph and ocfs2 which call filemap_fault from their fault handlers seem to be OK because they are not taking any fs lock before invoking generic implementation. xfs which takes XFS_MMAPLOCK_SHARED is safe from the reclaim recursion POV because this lock serializes truncate and punch hole with the page faults and it doesn't get involved in the reclaim. There is simply no reason to deliberately use a weaker allocation context when a __GFP_FS | __GFP_IO can be used. The GFP_NOFS protection might be even harmful. There is a push to fail GFP_NOFS allocations rather than loop within allocator indefinitely with a very limited reclaim ability. Once we start failing those requests the OOM killer might be triggered prematurely because the page cache allocation failure is propagated up the page fault path and end up in pagefault_out_of_memory. We cannot play with mapping_gfp_mask directly because that would be racy wrt. parallel page faults and it might interfere with other users who really rely on NOFS semantic from the stored gfp_mask. The mask is also inode proper so it would even be a layering violation. What we can do instead is to push the gfp_mask into struct vm_fault and allow fs layer to overwrite it should the callback need to be called with a different allocation context. Initialize the default to (mapping_gfp_mask | __GFP_FS | __GFP_IO) because this should be safe from the page fault path normally. Why do we care about mapping_gfp_mask at all then? Because this doesn't hold only reclaim protection flags but it also might contain zone and movability restrictions (GFP_DMA32, __GFP_MOVABLE and others) so we have to respect those. Signed-off-by: Michal Hocko Reported-by: Tetsuo Handa Acked-by: Jan Kara Acked-by: Vlastimil Babka Cc: Tetsuo Handa Cc: Mel Gorman Cc: Dave Chinner Cc: Mark Fasheh Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mm.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mm.h b/include/linux/mm.h index d396753c0577..ec9d4559514d 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -236,10 +236,14 @@ extern pgprot_t protection_map[16]; * ->fault function. The vma's ->fault is responsible for returning a bitmask * of VM_FAULT_xxx flags that give details about how the fault was handled. * + * MM layer fills up gfp_mask for page allocations but fault handler might + * alter it if its implementation requires a different allocation context. + * * pgoff should be used in favour of virtual_address, if possible. */ struct vm_fault { unsigned int flags; /* FAULT_FLAG_xxx flags */ + gfp_t gfp_mask; /* gfp mask to be used for allocations */ pgoff_t pgoff; /* Logical page offset based on vma */ void __user *virtual_address; /* Faulting virtual address */ -- cgit v1.2.3 From a8d0143730d7b42c9fe6d1435d92ecce6863a62a Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Thu, 14 Jan 2016 15:20:15 -0800 Subject: mm: page_alloc: generalize the dirty balance reserve The dirty balance reserve that dirty throttling has to consider is merely memory not available to userspace allocations. There is nothing writeback-specific about it. Generalize the name so that it's reusable outside of that context. Signed-off-by: Johannes Weiner Cc: Rik van Riel Cc: Mel Gorman Acked-by: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mmzone.h | 6 +++--- include/linux/swap.h | 1 - 2 files changed, 3 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index 3b6fb71bbeb3..33bb1b19273e 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -356,10 +356,10 @@ struct zone { struct per_cpu_pageset __percpu *pageset; /* - * This is a per-zone reserve of pages that should not be - * considered dirtyable memory. + * This is a per-zone reserve of pages that are not available + * to userspace allocations. */ - unsigned long dirty_balance_reserve; + unsigned long totalreserve_pages; #ifndef CONFIG_SPARSEMEM /* diff --git a/include/linux/swap.h b/include/linux/swap.h index 7ba7dccaf0e7..066bd21765ad 100644 --- a/include/linux/swap.h +++ b/include/linux/swap.h @@ -287,7 +287,6 @@ static inline void workingset_node_shadows_dec(struct radix_tree_node *node) /* linux/mm/page_alloc.c */ extern unsigned long totalram_pages; extern unsigned long totalreserve_pages; -extern unsigned long dirty_balance_reserve; extern unsigned long nr_free_buffer_pages(void); extern unsigned long nr_free_pagecache_pages(void); -- cgit v1.2.3 From 8c9c1701c7c23a57ebfd1a0b27b87053ae43cfb5 Mon Sep 17 00:00:00 2001 From: Alexander Kuleshov Date: Thu, 14 Jan 2016 15:20:42 -0800 Subject: mm/memblock: introduce for_each_memblock_type() We already have the for_each_memblock() macro in which provides ability to iterate over memblock regions of a known type. The for_each_memblock() macro allows us to pass the pointer to the struct memblock_type, instead we need to pass name of the type. This patch introduces a new macro for_each_memblock_type() which allows us iterate over memblock regions with the given type when the type is unknown. Signed-off-by: Alexander Kuleshov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/memblock.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/memblock.h b/include/linux/memblock.h index 3a092fba2eb2..c0c4208a286f 100644 --- a/include/linux/memblock.h +++ b/include/linux/memblock.h @@ -399,6 +399,11 @@ static inline unsigned long memblock_region_reserved_end_pfn(const struct memblo region < (memblock.memblock_type.regions + memblock.memblock_type.cnt); \ region++) +#define for_each_memblock_type(memblock_type, rgn) \ + idx = 0; \ + rgn = &memblock_type->regions[idx]; \ + for (idx = 0; idx < memblock_type->cnt; \ + idx++,rgn = &memblock_type->regions[idx]) #ifdef CONFIG_ARCH_DISCARD_MEMBLOCK #define __init_memblock __meminit -- cgit v1.2.3 From 7d828602e5ef3297a69392a2d31264e4ab9c8bb7 Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Thu, 14 Jan 2016 15:20:56 -0800 Subject: mm: memcontrol: export root_mem_cgroup A later patch will need this symbol in files other than memcontrol.c, so export it now and replace mem_cgroup_root_css at the same time. Signed-off-by: Johannes Weiner Acked-by: Michal Hocko Acked-by: David S. Miller Reviewed-by: Vladimir Davydov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/memcontrol.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index 78a1ec2e23fc..d0c724f53691 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -265,7 +265,8 @@ struct mem_cgroup { struct mem_cgroup_per_node *nodeinfo[0]; /* WARNING: nodeinfo must be the last member here */ }; -extern struct cgroup_subsys_state *mem_cgroup_root_css; + +extern struct mem_cgroup *root_mem_cgroup; /** * mem_cgroup_events - count memory events against a cgroup -- cgit v1.2.3 From 3d596f7b907b0281b997cf30c92994a71ad0a1a9 Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Thu, 14 Jan 2016 15:21:05 -0800 Subject: net: tcp_memcontrol: protect all tcp_memcontrol calls by jump-label Move the jump-label from sock_update_memcg() and sock_release_memcg() to the callsite, and so eliminate those function calls when socket accounting is not enabled. This also eliminates the need for dummy functions because the calls will be optimized away if the Kconfig options are not enabled. Signed-off-by: Johannes Weiner Acked-by: David S. Miller Reviewed-by: Vladimir Davydov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/memcontrol.h | 9 --------- 1 file changed, 9 deletions(-) (limited to 'include/linux') diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index d0c724f53691..85c437b0cbc0 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -694,17 +694,8 @@ static inline void mem_cgroup_wb_stats(struct bdi_writeback *wb, #endif /* CONFIG_CGROUP_WRITEBACK */ struct sock; -#if defined(CONFIG_INET) && defined(CONFIG_MEMCG_KMEM) void sock_update_memcg(struct sock *sk); void sock_release_memcg(struct sock *sk); -#else -static inline void sock_update_memcg(struct sock *sk) -{ -} -static inline void sock_release_memcg(struct sock *sk) -{ -} -#endif /* CONFIG_INET && CONFIG_MEMCG_KMEM */ #ifdef CONFIG_MEMCG_KMEM extern struct static_key memcg_kmem_enabled_key; -- cgit v1.2.3 From af95d7df4059cfeab7e7c244f3564214aada7dad Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Thu, 14 Jan 2016 15:21:08 -0800 Subject: net: tcp_memcontrol: remove dead per-memcg count of allocated sockets The number of allocated sockets is used for calculations in the soft limit phase, where packets are accepted but the socket is under memory pressure. Since there is no soft limit phase in tcp_memcontrol, and memory pressure is only entered when packets are already dropped, this is actually dead code. Remove it. As this is the last user of parent_cg_proto(), remove that too. Signed-off-by: Johannes Weiner Acked-by: David S. Miller Reviewed-by: Vladimir Davydov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/memcontrol.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index 85c437b0cbc0..15acc04ebdd3 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -87,7 +87,6 @@ enum mem_cgroup_events_target { struct cg_proto { struct page_counter memory_allocated; /* Current allocated memory. */ - struct percpu_counter sockets_allocated; /* Current number of sockets. */ int memory_pressure; bool active; long sysctl_mem[3]; -- cgit v1.2.3 From 80f23124f57c77915a7b4201d8dcba38a38b23f0 Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Thu, 14 Jan 2016 15:21:11 -0800 Subject: net: tcp_memcontrol: simplify the per-memcg limit access tcp_memcontrol replicates the global sysctl_mem limit array per cgroup, but it only ever sets these entries to the value of the memory_allocated page_counter limit. Use the latter directly. Signed-off-by: Johannes Weiner Reviewed-by: Vladimir Davydov Acked-by: David S. Miller Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/memcontrol.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index 15acc04ebdd3..6c91c1b73951 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -89,7 +89,6 @@ struct cg_proto { struct page_counter memory_allocated; /* Current allocated memory. */ int memory_pressure; bool active; - long sysctl_mem[3]; /* * memcg field is used to find which memcg we belong directly * Each memcg struct can hold more than one cg_proto, so container_of -- cgit v1.2.3 From e805605c721021879a1469bdae45c6f80bc985f4 Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Thu, 14 Jan 2016 15:21:14 -0800 Subject: net: tcp_memcontrol: sanitize tcp memory accounting callbacks There won't be a tcp control soft limit, so integrating the memcg code into the global skmem limiting scheme complicates things unnecessarily. Replace this with simple and clear charge and uncharge calls--hidden behind a jump label--to account skb memory. Note that this is not purely aesthetic: as a result of shoehorning the per-memcg code into the same memory accounting functions that handle the global level, the old code would compare the per-memcg consumption against the smaller of the per-memcg limit and the global limit. This allowed the total consumption of multiple sockets to exceed the global limit, as long as the individual sockets stayed within bounds. After this change, the code will always compare the per-memcg consumption to the per-memcg limit, and the global consumption to the global limit, and thus close this loophole. Without a soft limit, the per-memcg memory pressure state in sockets is generally questionable. However, we did it until now, so we continue to enter it when the hard limit is hit, and packets are dropped, to let other sockets in the cgroup know that they shouldn't grow their transmit windows, either. However, keep it simple in the new callback model and leave memory pressure lazily when the next packet is accepted (as opposed to doing it synchroneously when packets are processed). When packets are dropped, network performance will already be in the toilet, so that should be a reasonable trade-off. As described above, consumption is now checked on the per-memcg level and the global level separately. Likewise, memory pressure states are maintained on both the per-memcg level and the global level, and a socket is considered under pressure when either level asserts as much. Signed-off-by: Johannes Weiner Reviewed-by: Vladimir Davydov Acked-by: David S. Miller Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/memcontrol.h | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index 6c91c1b73951..e4e77bd1dd39 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -660,12 +660,6 @@ void mem_cgroup_count_vm_event(struct mm_struct *mm, enum vm_event_item idx) } #endif /* CONFIG_MEMCG */ -enum { - UNDER_LIMIT, - SOFT_LIMIT, - OVER_LIMIT, -}; - #ifdef CONFIG_CGROUP_WRITEBACK struct list_head *mem_cgroup_cgwb_list(struct mem_cgroup *memcg); @@ -694,6 +688,19 @@ static inline void mem_cgroup_wb_stats(struct bdi_writeback *wb, struct sock; void sock_update_memcg(struct sock *sk); void sock_release_memcg(struct sock *sk); +bool mem_cgroup_charge_skmem(struct cg_proto *proto, unsigned int nr_pages); +void mem_cgroup_uncharge_skmem(struct cg_proto *proto, unsigned int nr_pages); +#if defined(CONFIG_MEMCG_KMEM) && defined(CONFIG_INET) +static inline bool mem_cgroup_under_socket_pressure(struct cg_proto *proto) +{ + return proto->memory_pressure; +} +#else +static inline bool mem_cgroup_under_pressure(struct cg_proto *proto) +{ + return false; +} +#endif #ifdef CONFIG_MEMCG_KMEM extern struct static_key memcg_kmem_enabled_key; -- cgit v1.2.3 From baac50bbc3cdfd184ebf586b1704edbfcee866df Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Thu, 14 Jan 2016 15:21:17 -0800 Subject: net: tcp_memcontrol: simplify linkage between socket and page counter There won't be any separate counters for socket memory consumed by protocols other than TCP in the future. Remove the indirection and link sockets directly to their owning memory cgroup. Signed-off-by: Johannes Weiner Reviewed-by: Vladimir Davydov Acked-by: David S. Miller Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/memcontrol.h | 20 +++++--------------- 1 file changed, 5 insertions(+), 15 deletions(-) (limited to 'include/linux') diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index e4e77bd1dd39..7c085e4636ba 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -89,16 +89,6 @@ struct cg_proto { struct page_counter memory_allocated; /* Current allocated memory. */ int memory_pressure; bool active; - /* - * memcg field is used to find which memcg we belong directly - * Each memcg struct can hold more than one cg_proto, so container_of - * won't really cut. - * - * The elegant solution would be having an inverse function to - * proto_cgroup in struct proto, but that means polluting the structure - * for everybody, instead of just for memcg users. - */ - struct mem_cgroup *memcg; }; #ifdef CONFIG_MEMCG @@ -688,15 +678,15 @@ static inline void mem_cgroup_wb_stats(struct bdi_writeback *wb, struct sock; void sock_update_memcg(struct sock *sk); void sock_release_memcg(struct sock *sk); -bool mem_cgroup_charge_skmem(struct cg_proto *proto, unsigned int nr_pages); -void mem_cgroup_uncharge_skmem(struct cg_proto *proto, unsigned int nr_pages); +bool mem_cgroup_charge_skmem(struct mem_cgroup *memcg, unsigned int nr_pages); +void mem_cgroup_uncharge_skmem(struct mem_cgroup *memcg, unsigned int nr_pages); #if defined(CONFIG_MEMCG_KMEM) && defined(CONFIG_INET) -static inline bool mem_cgroup_under_socket_pressure(struct cg_proto *proto) +static inline bool mem_cgroup_under_socket_pressure(struct mem_cgroup *memcg) { - return proto->memory_pressure; + return memcg->tcp_mem.memory_pressure; } #else -static inline bool mem_cgroup_under_pressure(struct cg_proto *proto) +static inline bool mem_cgroup_under_socket_pressure(struct mem_cgroup *memcg) { return false; } -- cgit v1.2.3 From 80e95fe0fdcde2812c341ad4209d62dc1a7af53b Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Thu, 14 Jan 2016 15:21:20 -0800 Subject: mm: memcontrol: generalize the socket accounting jump label The unified hierarchy memory controller is going to use this jump label as well to control the networking callbacks. Move it to the memory controller code and give it a more generic name. Signed-off-by: Johannes Weiner Acked-by: Michal Hocko Reviewed-by: Vladimir Davydov Acked-by: David S. Miller Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/memcontrol.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index 7c085e4636ba..03090e8e7fff 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -681,11 +681,14 @@ void sock_release_memcg(struct sock *sk); bool mem_cgroup_charge_skmem(struct mem_cgroup *memcg, unsigned int nr_pages); void mem_cgroup_uncharge_skmem(struct mem_cgroup *memcg, unsigned int nr_pages); #if defined(CONFIG_MEMCG_KMEM) && defined(CONFIG_INET) +extern struct static_key memcg_sockets_enabled_key; +#define mem_cgroup_sockets_enabled static_key_false(&memcg_sockets_enabled_key) static inline bool mem_cgroup_under_socket_pressure(struct mem_cgroup *memcg) { return memcg->tcp_mem.memory_pressure; } #else +#define mem_cgroup_sockets_enabled 0 static inline bool mem_cgroup_under_socket_pressure(struct mem_cgroup *memcg) { return false; -- cgit v1.2.3 From f7e1cb6ec51b041335b5ad4dd7aefb37a56d79a6 Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Thu, 14 Jan 2016 15:21:29 -0800 Subject: mm: memcontrol: account socket memory in unified hierarchy memory controller Socket memory can be a significant share of overall memory consumed by common workloads. In order to provide reasonable resource isolation in the unified hierarchy, this type of memory needs to be included in the tracking/accounting of a cgroup under active memory resource control. Overhead is only incurred when a non-root control group is created AND the memory controller is instructed to track and account the memory footprint of that group. cgroup.memory=nosocket can be specified on the boot commandline to override any runtime configuration and forcibly exclude socket memory from active memory resource control. Signed-off-by: Johannes Weiner Acked-by: David S. Miller Reviewed-by: Vladimir Davydov Acked-by: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/memcontrol.h | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index 03090e8e7fff..a355f61a2ed3 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -170,6 +170,9 @@ struct mem_cgroup { unsigned long low; unsigned long high; + /* Range enforcement for interrupt charges */ + struct work_struct high_work; + unsigned long soft_limit; /* vmpressure notifications */ @@ -680,12 +683,16 @@ void sock_update_memcg(struct sock *sk); void sock_release_memcg(struct sock *sk); bool mem_cgroup_charge_skmem(struct mem_cgroup *memcg, unsigned int nr_pages); void mem_cgroup_uncharge_skmem(struct mem_cgroup *memcg, unsigned int nr_pages); -#if defined(CONFIG_MEMCG_KMEM) && defined(CONFIG_INET) +#if defined(CONFIG_MEMCG) && defined(CONFIG_INET) extern struct static_key memcg_sockets_enabled_key; #define mem_cgroup_sockets_enabled static_key_false(&memcg_sockets_enabled_key) static inline bool mem_cgroup_under_socket_pressure(struct mem_cgroup *memcg) { +#ifdef CONFIG_MEMCG_KMEM return memcg->tcp_mem.memory_pressure; +#else + return false; +#endif } #else #define mem_cgroup_sockets_enabled 0 -- cgit v1.2.3 From 8e8ae645249b85c8ed6c178557f8db8613a6bcc7 Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Thu, 14 Jan 2016 15:21:32 -0800 Subject: mm: memcontrol: hook up vmpressure to socket pressure Let the networking stack know when a memcg is under reclaim pressure so that it can clamp its transmit windows accordingly. Whenever the reclaim efficiency of a cgroup's LRU lists drops low enough for a MEDIUM or HIGH vmpressure event to occur, assert a pressure state in the socket and tcp memory code that tells it to curb consumption growth from sockets associated with said control group. Traditionally, vmpressure reports for the entire subtree of a memcg under pressure, which drops useful information on the individual groups reclaimed. However, it's too late to change the userinterface, so add a second reporting mode that reports on the level of reclaim instead of at the level of pressure, and use that report for sockets. vmpressure events are naturally edge triggered, so for hysteresis assert socket pressure for a second to allow for subsequent vmpressure events to occur before letting the socket code return to normal. This will likely need finetuning for a wider variety of workloads, but for now stick to the vmpressure presets and keep hysteresis simple. Signed-off-by: Johannes Weiner Acked-by: David S. Miller Reviewed-by: Vladimir Davydov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/memcontrol.h | 32 ++++++++++++++++++++++++++++---- include/linux/vmpressure.h | 7 +++++-- 2 files changed, 33 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index a355f61a2ed3..c5a51039df57 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -249,6 +249,10 @@ struct mem_cgroup { struct wb_domain cgwb_domain; #endif +#ifdef CONFIG_INET + unsigned long socket_pressure; +#endif + /* List of events which userspace want to receive */ struct list_head event_list; spinlock_t event_list_lock; @@ -290,18 +294,34 @@ struct lruvec *mem_cgroup_page_lruvec(struct page *, struct zone *); bool task_in_mem_cgroup(struct task_struct *task, struct mem_cgroup *memcg); struct mem_cgroup *mem_cgroup_from_task(struct task_struct *p); -struct mem_cgroup *parent_mem_cgroup(struct mem_cgroup *memcg); static inline struct mem_cgroup *mem_cgroup_from_css(struct cgroup_subsys_state *css){ return css ? container_of(css, struct mem_cgroup, css) : NULL; } +#define mem_cgroup_from_counter(counter, member) \ + container_of(counter, struct mem_cgroup, member) + struct mem_cgroup *mem_cgroup_iter(struct mem_cgroup *, struct mem_cgroup *, struct mem_cgroup_reclaim_cookie *); void mem_cgroup_iter_break(struct mem_cgroup *, struct mem_cgroup *); +/** + * parent_mem_cgroup - find the accounting parent of a memcg + * @memcg: memcg whose parent to find + * + * Returns the parent memcg, or NULL if this is the root or the memory + * controller is in legacy no-hierarchy mode. + */ +static inline struct mem_cgroup *parent_mem_cgroup(struct mem_cgroup *memcg) +{ + if (!memcg->memory.parent) + return NULL; + return mem_cgroup_from_counter(memcg->memory.parent, memory); +} + static inline bool mem_cgroup_is_descendant(struct mem_cgroup *memcg, struct mem_cgroup *root) { @@ -689,10 +709,14 @@ extern struct static_key memcg_sockets_enabled_key; static inline bool mem_cgroup_under_socket_pressure(struct mem_cgroup *memcg) { #ifdef CONFIG_MEMCG_KMEM - return memcg->tcp_mem.memory_pressure; -#else - return false; + if (memcg->tcp_mem.memory_pressure) + return true; #endif + do { + if (time_before(jiffies, memcg->socket_pressure)) + return true; + } while ((memcg = parent_mem_cgroup(memcg))); + return false; } #else #define mem_cgroup_sockets_enabled 0 diff --git a/include/linux/vmpressure.h b/include/linux/vmpressure.h index 3e4535876d37..3347cc3ec0ab 100644 --- a/include/linux/vmpressure.h +++ b/include/linux/vmpressure.h @@ -12,6 +12,9 @@ struct vmpressure { unsigned long scanned; unsigned long reclaimed; + + unsigned long tree_scanned; + unsigned long tree_reclaimed; /* The lock is used to keep the scanned/reclaimed above in sync. */ struct spinlock sr_lock; @@ -26,7 +29,7 @@ struct vmpressure { struct mem_cgroup; #ifdef CONFIG_MEMCG -extern void vmpressure(gfp_t gfp, struct mem_cgroup *memcg, +extern void vmpressure(gfp_t gfp, struct mem_cgroup *memcg, bool tree, unsigned long scanned, unsigned long reclaimed); extern void vmpressure_prio(gfp_t gfp, struct mem_cgroup *memcg, int prio); @@ -40,7 +43,7 @@ extern int vmpressure_register_event(struct mem_cgroup *memcg, extern void vmpressure_unregister_event(struct mem_cgroup *memcg, struct eventfd_ctx *eventfd); #else -static inline void vmpressure(gfp_t gfp, struct mem_cgroup *memcg, +static inline void vmpressure(gfp_t gfp, struct mem_cgroup *memcg, bool tree, unsigned long scanned, unsigned long reclaimed) {} static inline void vmpressure_prio(gfp_t gfp, struct mem_cgroup *memcg, int prio) {} -- cgit v1.2.3 From ef12947c9c5a96af549c49f10e5503f0612a397c Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Thu, 14 Jan 2016 15:21:34 -0800 Subject: mm: memcontrol: switch to the updated jump-label API According to the direct use of struct static_key is deprecated. Update the socket and slab accounting code accordingly. Signed-off-by: Johannes Weiner Acked-by: David S. Miller Reported-by: Jason Baron Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/memcontrol.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index c5a51039df57..2292468f2a30 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -704,8 +704,8 @@ void sock_release_memcg(struct sock *sk); bool mem_cgroup_charge_skmem(struct mem_cgroup *memcg, unsigned int nr_pages); void mem_cgroup_uncharge_skmem(struct mem_cgroup *memcg, unsigned int nr_pages); #if defined(CONFIG_MEMCG) && defined(CONFIG_INET) -extern struct static_key memcg_sockets_enabled_key; -#define mem_cgroup_sockets_enabled static_key_false(&memcg_sockets_enabled_key) +extern struct static_key_false memcg_sockets_enabled_key; +#define mem_cgroup_sockets_enabled static_branch_unlikely(&memcg_sockets_enabled_key) static inline bool mem_cgroup_under_socket_pressure(struct mem_cgroup *memcg) { #ifdef CONFIG_MEMCG_KMEM @@ -727,7 +727,7 @@ static inline bool mem_cgroup_under_socket_pressure(struct mem_cgroup *memcg) #endif #ifdef CONFIG_MEMCG_KMEM -extern struct static_key memcg_kmem_enabled_key; +extern struct static_key_false memcg_kmem_enabled_key; extern int memcg_nr_cache_ids; void memcg_get_cache_ids(void); @@ -743,7 +743,7 @@ void memcg_put_cache_ids(void); static inline bool memcg_kmem_enabled(void) { - return static_key_false(&memcg_kmem_enabled_key); + return static_branch_unlikely(&memcg_kmem_enabled_key); } static inline bool memcg_kmem_is_active(struct mem_cgroup *memcg) -- cgit v1.2.3 From 0eb77e9880321915322d42913c3b53241739c8aa Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Thu, 14 Jan 2016 15:21:40 -0800 Subject: vmstat: make vmstat_updater deferrable again and shut down on idle Currently the vmstat updater is not deferrable as a result of commit ba4877b9ca51 ("vmstat: do not use deferrable delayed work for vmstat_update"). This in turn can cause multiple interruptions of the applications because the vmstat updater may run at Make vmstate_update deferrable again and provide a function that folds the differentials when the processor is going to idle mode thus addressing the issue of the above commit in a clean way. Note that the shepherd thread will continue scanning the differentials from another processor and will reenable the vmstat workers if it detects any changes. Fixes: ba4877b9ca51 ("vmstat: do not use deferrable delayed work for vmstat_update") Signed-off-by: Christoph Lameter Cc: Michal Hocko Cc: Johannes Weiner Cc: Tetsuo Handa Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/vmstat.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/vmstat.h b/include/linux/vmstat.h index 3e5d9075960f..73fae8c4a5fb 100644 --- a/include/linux/vmstat.h +++ b/include/linux/vmstat.h @@ -189,6 +189,7 @@ extern void __inc_zone_state(struct zone *, enum zone_stat_item); extern void dec_zone_state(struct zone *, enum zone_stat_item); extern void __dec_zone_state(struct zone *, enum zone_stat_item); +void quiet_vmstat(void); void cpu_vm_stats_fold(int cpu); void refresh_zone_stat_thresholds(void); @@ -249,6 +250,7 @@ static inline void __dec_zone_page_state(struct page *page, static inline void refresh_zone_stat_thresholds(void) { } static inline void cpu_vm_stats_fold(int cpu) { } +static inline void quiet_vmstat(void) { } static inline void drain_zonestat(struct zone *zone, struct per_cpu_pageset *pset) { } -- cgit v1.2.3 From d72ee911130631b50a8ccc615a7d4622c2062194 Mon Sep 17 00:00:00 2001 From: Geliang Tang Date: Thu, 14 Jan 2016 15:22:01 -0800 Subject: mm: move lru_to_page to mm_inline.h Move lru_to_page() from internal.h to mm_inline.h. Signed-off-by: Geliang Tang Acked-by: Vlastimil Babka Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mm_inline.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mm_inline.h b/include/linux/mm_inline.h index cf55945c83fb..712e8c37a200 100644 --- a/include/linux/mm_inline.h +++ b/include/linux/mm_inline.h @@ -100,4 +100,6 @@ static __always_inline enum lru_list page_lru(struct page *page) return lru; } +#define lru_to_page(head) (list_entry((head)->prev, struct page, lru)) + #endif -- cgit v1.2.3 From d30b5545bdcf802ffc24ec7dbc6dc4036f6e3820 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 14 Jan 2016 15:22:04 -0800 Subject: include/linux/memblock.h: fix ordering of 'flags' argument in comments for_each_free_mem_range() and for_each_free_mem_range_reverse() both accept a 'flags' argument, the comment surrounding the macro placed the 'flags' documentation at the very end, while 'flags' is in fact the 3rd argument to the macro, so let's preserve natural ordering here. Fixes: fc6daaf931518 ("mm/memblock: add extra "flags" to memblock to allow selection of memory based on attribute") Signed-off-by: Florian Fainelli Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/memblock.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/memblock.h b/include/linux/memblock.h index c0c4208a286f..173fb44e22f1 100644 --- a/include/linux/memblock.h +++ b/include/linux/memblock.h @@ -216,10 +216,10 @@ void __next_mem_pfn_range(int *idx, int nid, unsigned long *out_start_pfn, * for_each_free_mem_range - iterate through free memblock areas * @i: u64 used as loop variable * @nid: node selector, %NUMA_NO_NODE for all nodes + * @flags: pick from blocks based on memory attributes * @p_start: ptr to phys_addr_t for start address of the range, can be %NULL * @p_end: ptr to phys_addr_t for end address of the range, can be %NULL * @p_nid: ptr to int for nid of the range, can be %NULL - * @flags: pick from blocks based on memory attributes * * Walks over free (memory && !reserved) areas of memblock. Available as * soon as memblock is initialized. @@ -232,10 +232,10 @@ void __next_mem_pfn_range(int *idx, int nid, unsigned long *out_start_pfn, * for_each_free_mem_range_reverse - rev-iterate through free memblock areas * @i: u64 used as loop variable * @nid: node selector, %NUMA_NO_NODE for all nodes + * @flags: pick from blocks based on memory attributes * @p_start: ptr to phys_addr_t for start address of the range, can be %NULL * @p_end: ptr to phys_addr_t for end address of the range, can be %NULL * @p_nid: ptr to int for nid of the range, can be %NULL - * @flags: pick from blocks based on memory attributes * * Walks over free (memory && !reserved) areas of memblock in reverse * order. Available as soon as memblock is initialized. -- cgit v1.2.3 From 84638335900f1995495838fe1bd4870c43ec1f67 Mon Sep 17 00:00:00 2001 From: Konstantin Khlebnikov Date: Thu, 14 Jan 2016 15:22:07 -0800 Subject: mm: rework virtual memory accounting When inspecting a vague code inside prctl(PR_SET_MM_MEM) call (which testing the RLIMIT_DATA value to figure out if we're allowed to assign new @start_brk, @brk, @start_data, @end_data from mm_struct) it's been commited that RLIMIT_DATA in a form it's implemented now doesn't do anything useful because most of user-space libraries use mmap() syscall for dynamic memory allocations. Linus suggested to convert RLIMIT_DATA rlimit into something suitable for anonymous memory accounting. But in this patch we go further, and the changes are bundled together as: * keep vma counting if CONFIG_PROC_FS=n, will be used for limits * replace mm->shared_vm with better defined mm->data_vm * account anonymous executable areas as executable * account file-backed growsdown/up areas as stack * drop struct file* argument from vm_stat_account * enforce RLIMIT_DATA for size of data areas This way code looks cleaner: now code/stack/data classification depends only on vm_flags state: VM_EXEC & ~VM_WRITE -> code (VmExe + VmLib in proc) VM_GROWSUP | VM_GROWSDOWN -> stack (VmStk) VM_WRITE & ~VM_SHARED & !stack -> data (VmData) The rest (VmSize - VmData - VmStk - VmExe - VmLib) could be called "shared", but that might be strange beast like readonly-private or VM_IO area. - RLIMIT_AS limits whole address space "VmSize" - RLIMIT_STACK limits stack "VmStk" (but each vma individually) - RLIMIT_DATA now limits "VmData" Signed-off-by: Konstantin Khlebnikov Signed-off-by: Cyrill Gorcunov Cc: Quentin Casasnovas Cc: Vegard Nossum Acked-by: Linus Torvalds Cc: Willy Tarreau Cc: Andy Lutomirski Cc: Kees Cook Cc: Vladimir Davydov Cc: Pavel Emelyanov Cc: Peter Zijlstra Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mm.h | 13 +++---------- include/linux/mm_types.h | 2 +- 2 files changed, 4 insertions(+), 11 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mm.h b/include/linux/mm.h index ec9d4559514d..839d9e9a1c38 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1929,7 +1929,9 @@ extern void mm_drop_all_locks(struct mm_struct *mm); extern void set_mm_exe_file(struct mm_struct *mm, struct file *new_exe_file); extern struct file *get_mm_exe_file(struct mm_struct *mm); -extern int may_expand_vm(struct mm_struct *mm, unsigned long npages); +extern bool may_expand_vm(struct mm_struct *, vm_flags_t, unsigned long npages); +extern void vm_stat_account(struct mm_struct *, vm_flags_t, long npages); + extern struct vm_area_struct *_install_special_mapping(struct mm_struct *mm, unsigned long addr, unsigned long len, unsigned long flags, @@ -2147,15 +2149,6 @@ typedef int (*pte_fn_t)(pte_t *pte, pgtable_t token, unsigned long addr, extern int apply_to_page_range(struct mm_struct *mm, unsigned long address, unsigned long size, pte_fn_t fn, void *data); -#ifdef CONFIG_PROC_FS -void vm_stat_account(struct mm_struct *, unsigned long, struct file *, long); -#else -static inline void vm_stat_account(struct mm_struct *mm, - unsigned long flags, struct file *file, long pages) -{ - mm->total_vm += pages; -} -#endif /* CONFIG_PROC_FS */ #ifdef CONFIG_DEBUG_PAGEALLOC extern bool _debug_pagealloc_enabled; diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index 207890be93c8..6bc9a0ce2253 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -427,7 +427,7 @@ struct mm_struct { unsigned long total_vm; /* Total pages mapped */ unsigned long locked_vm; /* Pages that have PG_mlocked set */ unsigned long pinned_vm; /* Refcount permanently increased */ - unsigned long shared_vm; /* Shared pages (files) */ + unsigned long data_vm; /* VM_WRITE & ~VM_SHARED/GROWSDOWN */ unsigned long exec_vm; /* VM_EXEC & ~VM_WRITE */ unsigned long stack_vm; /* VM_GROWSUP/DOWN */ unsigned long def_flags; -- cgit v1.2.3 From 543dfb2df8ebb3eb0b499eae1d63de1701a99b40 Mon Sep 17 00:00:00 2001 From: Joshua Clayton Date: Thu, 14 Jan 2016 15:22:10 -0800 Subject: mm: fix noisy sparse warning in LIBCFS_ALLOC_PRE() Running sparse on drivers/staging/lustre results in dozens of warnings: include/linux/gfp.h:281:41: warning: odd constant _Bool cast (400000 becomes 1) Use "!!" to explicitly convert to bool and get rid of the warning. Signed-off-by: Joshua Clayton Cc: Mel Gorman Cc: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/gfp.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/gfp.h b/include/linux/gfp.h index 91f74e741aa2..28ad5f6494b0 100644 --- a/include/linux/gfp.h +++ b/include/linux/gfp.h @@ -278,7 +278,7 @@ static inline int gfpflags_to_migratetype(const gfp_t gfp_flags) static inline bool gfpflags_allow_blocking(const gfp_t gfp_flags) { - return (bool __force)(gfp_flags & __GFP_DIRECT_RECLAIM); + return !!(gfp_flags & __GFP_DIRECT_RECLAIM); } #ifdef CONFIG_HIGHMEM -- cgit v1.2.3 From 9207f9d45b0ad071baa128e846d7e7ed85016df3 Mon Sep 17 00:00:00 2001 From: Konstantin Khlebnikov Date: Fri, 8 Jan 2016 15:21:46 +0300 Subject: net: preserve IP control block during GSO segmentation Skb_gso_segment() uses skb control block during segmentation. This patch adds 32-bytes room for previous control block which will be copied into all resulting segments. This patch fixes kernel crash during fragmenting forwarded packets. Fragmentation requires valid IP CB in skb for clearing ip options. Also patch removes custom save/restore in ovs code, now it's redundant. Signed-off-by: Konstantin Khlebnikov Link: http://lkml.kernel.org/r/CALYGNiP-0MZ-FExV2HutTvE9U-QQtkKSoE--KN=JQE5STYsjAA@mail.gmail.com Signed-off-by: David S. Miller --- include/linux/skbuff.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 07f9ccd28654..11f935c1a090 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -3551,7 +3551,8 @@ struct skb_gso_cb { int encap_level; __u16 csum_start; }; -#define SKB_GSO_CB(skb) ((struct skb_gso_cb *)(skb)->cb) +#define SKB_SGO_CB_OFFSET 32 +#define SKB_GSO_CB(skb) ((struct skb_gso_cb *)((skb)->cb + SKB_SGO_CB_OFFSET)) static inline int skb_tnl_header_len(const struct sk_buff *inner_skb) { -- cgit v1.2.3