From 8bcb6c7d48eb341b1f49f814cdcbe05eb6f15680 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Fri, 30 Mar 2012 12:33:28 +0200 Subject: block: use lockdep_assert_held for queue locking Instead of an ugly open coded variant. Cc: axboe@kernel.dk Signed-off-by: Andi Kleen Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 18 +++++++----------- 1 file changed, 7 insertions(+), 11 deletions(-) (limited to 'include/linux') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 606cf339bb56..2aa24664a5b5 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -426,14 +426,10 @@ struct request_queue { (1 << QUEUE_FLAG_SAME_COMP) | \ (1 << QUEUE_FLAG_ADD_RANDOM)) -static inline int queue_is_locked(struct request_queue *q) +static inline void queue_lockdep_assert_held(struct request_queue *q) { -#ifdef CONFIG_SMP - spinlock_t *lock = q->queue_lock; - return lock && spin_is_locked(lock); -#else - return 1; -#endif + if (q->queue_lock) + lockdep_assert_held(q->queue_lock); } static inline void queue_flag_set_unlocked(unsigned int flag, @@ -445,7 +441,7 @@ static inline void queue_flag_set_unlocked(unsigned int flag, static inline int queue_flag_test_and_clear(unsigned int flag, struct request_queue *q) { - WARN_ON_ONCE(!queue_is_locked(q)); + queue_lockdep_assert_held(q); if (test_bit(flag, &q->queue_flags)) { __clear_bit(flag, &q->queue_flags); @@ -458,7 +454,7 @@ static inline int queue_flag_test_and_clear(unsigned int flag, static inline int queue_flag_test_and_set(unsigned int flag, struct request_queue *q) { - WARN_ON_ONCE(!queue_is_locked(q)); + queue_lockdep_assert_held(q); if (!test_bit(flag, &q->queue_flags)) { __set_bit(flag, &q->queue_flags); @@ -470,7 +466,7 @@ static inline int queue_flag_test_and_set(unsigned int flag, static inline void queue_flag_set(unsigned int flag, struct request_queue *q) { - WARN_ON_ONCE(!queue_is_locked(q)); + queue_lockdep_assert_held(q); __set_bit(flag, &q->queue_flags); } @@ -487,7 +483,7 @@ static inline int queue_in_flight(struct request_queue *q) static inline void queue_flag_clear(unsigned int flag, struct request_queue *q) { - WARN_ON_ONCE(!queue_is_locked(q)); + queue_lockdep_assert_held(q); __clear_bit(flag, &q->queue_flags); } -- cgit v1.2.3 From 327ef2e9048a5e39bf84d7f17f78a87e7a068742 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 23 Mar 2012 13:05:48 +0530 Subject: spi/pL022: include types.h to remove compilation warnings linux/pl022.h uses definitions like, u8, u16, etc, which have dependency of types.h file, which isn't included in it. So, we get compilation warnings. This patch includes types.h there to fix these warnings. Signed-off-by: Viresh Kumar Acked-by: Linus Walleij Signed-off-by: Grant Likely --- include/linux/amba/pl022.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/amba/pl022.h b/include/linux/amba/pl022.h index b8c51124ed19..76dd1b199a1b 100644 --- a/include/linux/amba/pl022.h +++ b/include/linux/amba/pl022.h @@ -25,6 +25,8 @@ #ifndef _SSP_PL022_H #define _SSP_PL022_H +#include + /** * whether SSP is in loopback mode or not */ -- cgit v1.2.3 From a2bd1140a264b561e38d99e656cd843c2d840e86 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Wed, 4 Apr 2012 16:10:46 -0700 Subject: netdma: adding alignment check for NETDMA ops This is the fallout from adding memcpy alignment workaround for certain IOATDMA hardware. NetDMA will only use DMA engine that can handle byte align ops. Acked-by: David S. Miller Signed-off-by: Dave Jiang Signed-off-by: Dan Williams --- include/linux/dmaengine.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 679b349d9b66..a5bb3ad5c7a5 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -948,6 +948,7 @@ int dma_async_device_register(struct dma_device *device); void dma_async_device_unregister(struct dma_device *device); void dma_run_dependencies(struct dma_async_tx_descriptor *tx); struct dma_chan *dma_find_channel(enum dma_transaction_type tx_type); +struct dma_chan *net_dma_find_channel(void); #define dma_request_channel(mask, x, y) __dma_request_channel(&(mask), x, y) /* --- Helper iov-locking functions --- */ -- cgit v1.2.3 From 95ad2f873d5d404dc9ebc2377de0b762346346c0 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Fri, 6 Apr 2012 18:12:54 +0200 Subject: netfilter: ip6_tables: ip6t_ext_hdr is now static inline We may hit this in xt_LOG: net/built-in.o:xt_LOG.c:function dump_ipv6_packet: error: undefined reference to 'ip6t_ext_hdr' happens with these config options: CONFIG_NETFILTER_XT_TARGET_LOG=y CONFIG_IP6_NF_IPTABLES=m ip6t_ext_hdr is fairly small and it is called in the packet path. Make it static inline. Reported-by: Simon Kirby Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter_ipv6/ip6_tables.h | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/netfilter_ipv6/ip6_tables.h b/include/linux/netfilter_ipv6/ip6_tables.h index f549adccc94c..1bc898b14a80 100644 --- a/include/linux/netfilter_ipv6/ip6_tables.h +++ b/include/linux/netfilter_ipv6/ip6_tables.h @@ -287,7 +287,17 @@ extern unsigned int ip6t_do_table(struct sk_buff *skb, struct xt_table *table); /* Check for an extension */ -extern int ip6t_ext_hdr(u8 nexthdr); +static inline int +ip6t_ext_hdr(u8 nexthdr) +{ return (nexthdr == IPPROTO_HOPOPTS) || + (nexthdr == IPPROTO_ROUTING) || + (nexthdr == IPPROTO_FRAGMENT) || + (nexthdr == IPPROTO_ESP) || + (nexthdr == IPPROTO_AH) || + (nexthdr == IPPROTO_NONE) || + (nexthdr == IPPROTO_DSTOPTS); +} + /* find specified header and get offset to it */ extern int ipv6_find_hdr(const struct sk_buff *skb, unsigned int *offset, int target, unsigned short *fragoff); -- cgit v1.2.3 From 49b532f96fda23663f8be35593d1c1372c0f91e0 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 6 Apr 2012 11:49:44 -0700 Subject: Revert "serial/8250_pci: setup-quirk workaround for the kt serial controller" This reverts commit 448ac154c957c4580531fa0c8f2045816fe2f0e7. The semantic of UPF_IIR_ONCE is only guaranteed to workaround the race condition in the kt serial's iir register if the only source of interrupts is THRE (fifo-empty) events. An modem status event at the wrong time can again cause an iir read to drop the 'empty' status leading to a hang. So, revert this in preparation for using the existing "I don't trust my iir register" workaround in the 8250 core (UART_BUG_THRE). [stable: 3.3.x] Cc: stable Acked-by: Alan Cox Cc: Sudhakar Mamillapalli Reported-by: Nhan H Mai Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman --- include/linux/serial_core.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index f51bf2e70c69..882f1d61aa56 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -357,7 +357,6 @@ struct uart_port { #define UPF_CONS_FLOW ((__force upf_t) (1 << 23)) #define UPF_SHARE_IRQ ((__force upf_t) (1 << 24)) #define UPF_EXAR_EFR ((__force upf_t) (1 << 25)) -#define UPF_IIR_ONCE ((__force upf_t) (1 << 26)) /* The exact UART type is known and should not be probed. */ #define UPF_FIXED_TYPE ((__force upf_t) (1 << 27)) #define UPF_BOOT_AUTOCONF ((__force upf_t) (1 << 28)) -- cgit v1.2.3 From bc02d15a3452fdf9276e8fb89c5e504a88df888a Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 6 Apr 2012 11:49:50 -0700 Subject: serial/8250_pci: add a "force background timer" flag and use it for the "kt" serial port Workaround dropped notifications in the iir register. Register reads coincident with new interrupt notifications sometimes result in this device clearing the interrupt event without reporting it in the read data. The serial core already has a heuristic for determining when a device has an untrustworthy iir register. In this case when we apriori know that the iir is faulty use a flag (UPF_BUG_THRE) to bypass the test and force usage of the background timer. [stable: 3.3.x] Acked-by: Alan Cox Cc: stable Reported-by: Nhan H Mai Reported-by: Sudhakar Mamillapalli Tested-by: Nhan H Mai Tested-by: Sudhakar Mamillapalli Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman --- include/linux/serial_core.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 882f1d61aa56..2db407a40051 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -357,6 +357,7 @@ struct uart_port { #define UPF_CONS_FLOW ((__force upf_t) (1 << 23)) #define UPF_SHARE_IRQ ((__force upf_t) (1 << 24)) #define UPF_EXAR_EFR ((__force upf_t) (1 << 25)) +#define UPF_BUG_THRE ((__force upf_t) (1 << 26)) /* The exact UART type is known and should not be probed. */ #define UPF_FIXED_TYPE ((__force upf_t) (1 << 27)) #define UPF_BOOT_AUTOCONF ((__force upf_t) (1 << 28)) -- cgit v1.2.3 From 891a3b1fddb24b4b53426685bd0390bb74c9b5b3 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 28 Mar 2012 16:10:49 -0400 Subject: USB: fix bug in serial driver unregistration This patch (as1536) fixes a bug in the USB serial core. Unloading and reloading a serial driver while a serial device is plugged in causes errors because of the code in usb_serial_disconnect() that tries to make sure the port_remove method is called. With the new order of driver registration introduced in the 3.4 kernel, this is definitely not the right thing to do (if indeed it ever was). The patch removes that whole section code, along with the mechanism for keeping track of each port's registration state, which is no longer needed. The driver core can handle all that stuff for us. Note: This has been tested only with one or two USB serial drivers. In theory, other drivers might still run into trouble. But if they do, it will be the fault of the drivers, not of this patch -- that is, the drivers will need to be fixed. Signed-off-by: Alan Stern Reported-and-tested-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/serial.h | 8 -------- 1 file changed, 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index fbb666b1b670..474283888233 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -28,13 +28,6 @@ /* parity check flag */ #define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) -enum port_dev_state { - PORT_UNREGISTERED, - PORT_REGISTERING, - PORT_REGISTERED, - PORT_UNREGISTERING, -}; - /* USB serial flags */ #define USB_SERIAL_WRITE_BUSY 0 @@ -124,7 +117,6 @@ struct usb_serial_port { char throttle_req; unsigned long sysrq; /* sysrq timeout */ struct device dev; - enum port_dev_state dev_state; }; #define to_usb_serial_port(d) container_of(d, struct usb_serial_port, dev) -- cgit v1.2.3 From bf070bc14178f1458e7eccd76316ac24f76f1890 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Wed, 21 Mar 2012 16:35:52 +0200 Subject: usb: musb: wake the device before ulpi transfers musb can be suspended at the time some other driver wants to do ulpi transfers using usb_phy_io_* functions, and that can cause data abort, as it happened with isp1704_charger: http://article.gmane.org/gmane.linux.kernel/1226122 Add pm_runtime to ulpi functions to rectify this. This also adds io_dev to usb_phy so that pm_runtime_* functions can be used. Cc: Felipe Contreras Signed-off-by: Grazvydas Ignotas Signed-off-by: Felipe Balbi --- include/linux/usb/otg.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h index f67810f8f21b..38ab3f46346f 100644 --- a/include/linux/usb/otg.h +++ b/include/linux/usb/otg.h @@ -94,6 +94,7 @@ struct usb_phy { struct usb_otg *otg; + struct device *io_dev; struct usb_phy_io_ops *io_ops; void __iomem *io_priv; -- cgit v1.2.3 From a699e4e49ec3fb62c4a44394357d14081df10bef Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Tue, 3 Apr 2012 07:11:04 -0600 Subject: irq: Kill pointless irqd_to_hw export It makes no sense to export this trivial function. Make it a static inline instead. This patch also drops virq_to_hw from arch/c6x since it is unused by that architecture. v2: Move irq_hw_number_t into types.h to fix ARM build failure Signed-off-by: Grant Likely Acked-by: Thomas Gleixner Cc: Benjamin Herrenschmidt --- include/linux/irq.h | 5 +++++ include/linux/irqdomain.h | 6 ------ include/linux/types.h | 6 ++++++ 3 files changed, 11 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/irq.h b/include/linux/irq.h index bff29c58da23..7810406f3d80 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -263,6 +263,11 @@ static inline void irqd_clr_chained_irq_inprogress(struct irq_data *d) d->state_use_accessors &= ~IRQD_IRQ_INPROGRESS; } +static inline irq_hw_number_t irqd_to_hwirq(struct irq_data *d) +{ + return d->hwirq; +} + /** * struct irq_chip - hardware interrupt chip descriptor * diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h index ead4a4215797..ac17b9b2e7be 100644 --- a/include/linux/irqdomain.h +++ b/include/linux/irqdomain.h @@ -42,12 +42,6 @@ struct of_device_id; /* Number of irqs reserved for a legacy isa controller */ #define NUM_ISA_INTERRUPTS 16 -/* This type is the placeholder for a hardware interrupt number. It has to - * be big enough to enclose whatever representation is used by a given - * platform. - */ -typedef unsigned long irq_hw_number_t; - /** * struct irq_domain_ops - Methods for irq_domain objects * @match: Match an interrupt controller device node to a host, returns diff --git a/include/linux/types.h b/include/linux/types.h index e5fa50345516..7f480db60231 100644 --- a/include/linux/types.h +++ b/include/linux/types.h @@ -210,6 +210,12 @@ typedef u32 phys_addr_t; typedef phys_addr_t resource_size_t; +/* + * This type is the placeholder for a hardware interrupt number. It has to be + * big enough to enclose whatever representation is used by a given platform. + */ +typedef unsigned long irq_hw_number_t; + typedef struct { int counter; } atomic_t; -- cgit v1.2.3 From 89e004e78ff6317520d35bdb0d0174893ab49f17 Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Thu, 5 Apr 2012 17:07:23 +0800 Subject: pinctrl: fix compile error if not select PINMUX support The pinctrl_register_mappings is defined in core.c, so change the dependent macro from CONFIG_MUX to CONFIG_PINCTRL. The compile error message is: drivers/pinctrl/core.c:886: error: redefinition of 'pinctrl_register_mappings' include/linux/pinctrl/machine.h:160: note: previous definition of 'pinctrl_register_mappings' was here make[2]: *** [drivers/pinctrl/core.o] Error 1 make[1]: *** [drivers/pinctrl] Error 2 make: *** [drivers] Error 2 Acked-by: Stephen Warren Signed-off-by: Dong Aisheng Signed-off-by: Linus Walleij --- include/linux/pinctrl/machine.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/pinctrl/machine.h b/include/linux/pinctrl/machine.h index fee4349364f7..d32eb8ccba84 100644 --- a/include/linux/pinctrl/machine.h +++ b/include/linux/pinctrl/machine.h @@ -148,7 +148,7 @@ struct pinctrl_map { #define PIN_MAP_CONFIGS_GROUP_HOG_DEFAULT(dev, grp, cfgs) \ PIN_MAP_CONFIGS_GROUP(dev, PINCTRL_STATE_DEFAULT, dev, grp, cfgs) -#ifdef CONFIG_PINMUX +#ifdef CONFIG_PINCTRL extern int pinctrl_register_mappings(struct pinctrl_map const *map, unsigned num_maps); -- cgit v1.2.3 From 6f11f6f1a0a717eb8bd0dadd101c4522b945c501 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Fri, 16 Mar 2012 14:54:23 -0600 Subject: pinctrl: include to prevent compile errors Macros in call ARRAY_SIZE(), the definition of which eventually calls BUILD_BUG_ON_ZERO(), which is defined in . Include that so that every .c file using the pinctrl macros doesn't have to do that itself. Signed-off-by: Stephen Warren Signed-off-by: Linus Walleij --- include/linux/pinctrl/machine.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pinctrl/machine.h b/include/linux/pinctrl/machine.h index d32eb8ccba84..e4d1de742502 100644 --- a/include/linux/pinctrl/machine.h +++ b/include/linux/pinctrl/machine.h @@ -12,6 +12,8 @@ #ifndef __LINUX_PINCTRL_MACHINE_H #define __LINUX_PINCTRL_MACHINE_H +#include + #include "pinctrl-state.h" enum pinctrl_map_type { -- cgit v1.2.3 From 6069a4c988d75c0fb309fa7da0909df2a222a65e Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 30 Jan 2012 11:43:52 -0800 Subject: vgaarb.h: fix build warnings Fix build warnings by providing a struct stub since no fields of the struct are used: include/linux/vgaarb.h:66:9: warning: 'struct pci_dev' declared inside parameter list include/linux/vgaarb.h:66:9: warning: its scope is only this definition or declaration, which is probably not what you want include/linux/vgaarb.h:99:34: warning: 'struct pci_dev' declared inside parameter list include/linux/vgaarb.h:109:6: warning: 'struct pci_dev' declared inside parameter list include/linux/vgaarb.h:121:8: warning: 'struct pci_dev' declared inside parameter list include/linux/vgaarb.h:140:37: warning: 'struct pci_dev' declared inside parameter list Signed-off-by: Randy Dunlap Signed-off-by: Dave Airlie --- include/linux/vgaarb.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/vgaarb.h b/include/linux/vgaarb.h index 9c3120dca294..b572f80bdfd5 100644 --- a/include/linux/vgaarb.h +++ b/include/linux/vgaarb.h @@ -47,6 +47,8 @@ */ #define VGA_DEFAULT_DEVICE (NULL) +struct pci_dev; + /* For use by clients */ /** -- cgit v1.2.3 From a21d45726acacc963d8baddf74607d9b74e2b723 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 10 Apr 2012 20:30:48 +0000 Subject: tcp: avoid order-1 allocations on wifi and tx path Marc Merlin reported many order-1 allocations failures in TX path on its wireless setup, that dont make any sense with MTU=1500 network, and non SG capable hardware. After investigation, it turns out TCP uses sk_stream_alloc_skb() and used as a convention skb_tailroom(skb) to know how many bytes of data payload could be put in this skb (for non SG capable devices) Note : these skb used kmalloc-4096 (MTU=1500 + MAX_HEADER + sizeof(struct skb_shared_info) being above 2048) Later, mac80211 layer need to add some bytes at the tail of skb (IEEE80211_ENCRYPT_TAILROOM = 18 bytes) and since no more tailroom is available has to call pskb_expand_head() and request order-1 allocations. This patch changes sk_stream_alloc_skb() so that only sk->sk_prot->max_header bytes of headroom are reserved, and use a new skb field, avail_size to hold the data payload limit. This way, order-0 allocations done by TCP stack can leave more than 2 KB of tailroom and no more allocation is performed in mac80211 layer (or any layer needing some tailroom) avail_size is unioned with mark/dropcount, since mark will be set later in IP stack for output packets. Therefore, skb size is unchanged. Reported-by: Marc MERLIN Tested-by: Marc MERLIN Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/skbuff.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'include/linux') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 33370271b8b2..70a3f8d49118 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -481,6 +481,7 @@ struct sk_buff { union { __u32 mark; __u32 dropcount; + __u32 avail_size; }; sk_buff_data_t transport_header; @@ -1365,6 +1366,18 @@ static inline int skb_tailroom(const struct sk_buff *skb) return skb_is_nonlinear(skb) ? 0 : skb->end - skb->tail; } +/** + * skb_availroom - bytes at buffer end + * @skb: buffer to check + * + * Return the number of bytes of free space at the tail of an sk_buff + * allocated by sk_stream_alloc() + */ +static inline int skb_availroom(const struct sk_buff *skb) +{ + return skb_is_nonlinear(skb) ? 0 : skb->avail_size - skb->len; +} + /** * skb_reserve - adjust headroom * @skb: buffer to alter -- cgit v1.2.3 From 32f6daad4651a748a58a3ab6da0611862175722f Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Wed, 11 Apr 2012 09:51:49 -0600 Subject: KVM: unmap pages from the iommu when slots are removed We've been adding new mappings, but not destroying old mappings. This can lead to a page leak as pages are pinned using get_user_pages, but only unpinned with put_page if they still exist in the memslots list on vm shutdown. A memslot that is destroyed while an iommu domain is enabled for the guest will therefore result in an elevated page reference count that is never cleared. Additionally, without this fix, the iommu is only programmed with the first translation for a gpa. This can result in peer-to-peer errors if a mapping is destroyed and replaced by a new mapping at the same gpa as the iommu will still be pointing to the original, pinned memory address. Signed-off-by: Alex Williamson Signed-off-by: Marcelo Tosatti --- include/linux/kvm_host.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 665a260c7e09..72cbf08d45fb 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -596,6 +596,7 @@ void kvm_free_irq_source_id(struct kvm *kvm, int irq_source_id); #ifdef CONFIG_IOMMU_API int kvm_iommu_map_pages(struct kvm *kvm, struct kvm_memory_slot *slot); +void kvm_iommu_unmap_pages(struct kvm *kvm, struct kvm_memory_slot *slot); int kvm_iommu_map_guest(struct kvm *kvm); int kvm_iommu_unmap_guest(struct kvm *kvm); int kvm_assign_device(struct kvm *kvm, @@ -609,6 +610,11 @@ static inline int kvm_iommu_map_pages(struct kvm *kvm, return 0; } +static inline void kvm_iommu_unmap_pages(struct kvm *kvm, + struct kvm_memory_slot *slot) +{ +} + static inline int kvm_iommu_map_guest(struct kvm *kvm) { return -ENODEV; -- cgit v1.2.3 From 6fa6c8e25e95bdc73e92e4c96b8e3299169b616e Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Wed, 15 Feb 2012 15:06:08 -0700 Subject: irq_domain: Move irq_virq_count into NOMAP revmap This patch replaces the old global setting of irq_virq_count that is only used by the NOMAP mapping and instead uses a revmap_data property so that the maximum NOMAP allocation can be set per NOMAP irq_domain. There is exactly one user of irq_virq_count in-tree right now: PS3. Also, irq_virq_count is only useful for the NOMAP mapping. So, instead of having a single global irq_virq_count values, this change drops it entirely and added a max_irq argument to irq_domain_add_nomap(). That makes it a property of an individual nomap irq domain instead of a global system settting. Signed-off-by: Grant Likely Tested-by: Benjamin Herrenschmidt Cc: Thomas Gleixner Cc: Milton Miller --- include/linux/irqdomain.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h index ac17b9b2e7be..c65740d76e66 100644 --- a/include/linux/irqdomain.h +++ b/include/linux/irqdomain.h @@ -98,6 +98,9 @@ struct irq_domain { unsigned int size; unsigned int *revmap; } linear; + struct { + unsigned int max_irq; + } nomap; struct radix_tree_root tree; } revmap_data; const struct irq_domain_ops *ops; @@ -120,6 +123,7 @@ struct irq_domain *irq_domain_add_linear(struct device_node *of_node, const struct irq_domain_ops *ops, void *host_data); struct irq_domain *irq_domain_add_nomap(struct device_node *of_node, + unsigned int max_irq, const struct irq_domain_ops *ops, void *host_data); struct irq_domain *irq_domain_add_tree(struct device_node *of_node, @@ -128,7 +132,6 @@ struct irq_domain *irq_domain_add_tree(struct device_node *of_node, extern struct irq_domain *irq_find_host(struct device_node *node); extern void irq_set_default_host(struct irq_domain *host); -extern void irq_set_virq_count(unsigned int count); static inline struct irq_domain *irq_domain_add_legacy_isa( struct device_node *of_node, @@ -140,7 +143,6 @@ static inline struct irq_domain *irq_domain_add_legacy_isa( } extern struct irq_domain *irq_find_host(struct device_node *node); extern void irq_set_default_host(struct irq_domain *host); -extern void irq_set_virq_count(unsigned int count); extern unsigned int irq_create_mapping(struct irq_domain *host, -- cgit v1.2.3 From c628ee67fb15a0d8d48351aa2e487c5f14779785 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Thu, 12 Apr 2012 12:57:08 +0200 Subject: fuse: use flexible array in fuse.h Use the ISO C standard compliant form instead of the gcc extension in the interface definition. Reported-by: Shachar Sharon Signed-off-by: Miklos Szeredi --- include/linux/fuse.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/fuse.h b/include/linux/fuse.h index 8ba2c9460b28..8f2ab8fef929 100644 --- a/include/linux/fuse.h +++ b/include/linux/fuse.h @@ -593,7 +593,7 @@ struct fuse_dirent { __u64 off; __u32 namelen; __u32 type; - char name[0]; + char name[]; }; #define FUSE_NAME_OFFSET offsetof(struct fuse_dirent, name) -- cgit v1.2.3 From 69349c2dc01c489eccaa4c472542c08e370c6d7e Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Thu, 12 Apr 2012 19:46:32 -0400 Subject: kconfig: fix IS_ENABLED to not require all options to be defined Using IS_ENABLED() within C (vs. within CPP #if statements) in its current form requires us to actually define every possible bool/tristate Kconfig option twice (__enabled_* and __enabled_*_MODULE variants). This results in a huge autoconf.h file, on the order of 16k lines for a x86_64 defconfig. Fixing IS_ENABLED to be able to work on the smaller subset of just things that we really have defined is step one to fixing this. Which means it has to not choke when fed non-enabled options, such as: include/linux/netdevice.h:964:1: warning: "__enabled_CONFIG_FCOE_MODULE" is not defined [-Wundef] The original prototype of how to implement a C and preprocessor compatible way of doing this came from the Google+ user "comex ." in response to Linus' crowdsourcing challenge for a possible improvement on his earlier C specific solution: #define config_enabled(x) (__stringify(x)[0] == '1') In this implementation, I've chosen variable names that hopefully make how it works more understandable. Signed-off-by: Paul Gortmaker Signed-off-by: Linus Torvalds --- include/linux/kconfig.h | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/kconfig.h b/include/linux/kconfig.h index 067eda0e4b32..be342b94c640 100644 --- a/include/linux/kconfig.h +++ b/include/linux/kconfig.h @@ -4,29 +4,43 @@ #include /* - * Helper macros to use CONFIG_ options in C expressions. Note that + * Helper macros to use CONFIG_ options in C/CPP expressions. Note that * these only work with boolean and tristate options. */ +/* + * Getting something that works in C and CPP for an arg that may or may + * not be defined is tricky. Here, if we have "#define CONFIG_BOOGER 1" + * we match on the placeholder define, insert the "0," for arg1 and generate + * the triplet (0, 1, 0). Then the last step cherry picks the 2nd arg (a one). + * When CONFIG_BOOGER is not defined, we generate a (... 1, 0) pair, and when + * the last step cherry picks the 2nd arg, we get a zero. + */ +#define __ARG_PLACEHOLDER_1 0, +#define config_enabled(cfg) _config_enabled(cfg) +#define _config_enabled(value) __config_enabled(__ARG_PLACEHOLDER_##value) +#define __config_enabled(arg1_or_junk) ___config_enabled(arg1_or_junk 1, 0) +#define ___config_enabled(__ignored, val, ...) val + /* * IS_ENABLED(CONFIG_FOO) evaluates to 1 if CONFIG_FOO is set to 'y' or 'm', * 0 otherwise. * */ #define IS_ENABLED(option) \ - (__enabled_ ## option || __enabled_ ## option ## _MODULE) + (config_enabled(option) || config_enabled(option##_MODULE)) /* * IS_BUILTIN(CONFIG_FOO) evaluates to 1 if CONFIG_FOO is set to 'y', 0 * otherwise. For boolean options, this is equivalent to * IS_ENABLED(CONFIG_FOO). */ -#define IS_BUILTIN(option) __enabled_ ## option +#define IS_BUILTIN(option) config_enabled(option) /* * IS_MODULE(CONFIG_FOO) evaluates to 1 if CONFIG_FOO is set to 'm', 0 * otherwise. */ -#define IS_MODULE(option) __enabled_ ## option ## _MODULE +#define IS_MODULE(option) config_enabled(option##_MODULE) #endif /* __LINUX_KCONFIG_H */ -- cgit v1.2.3 From 1e45860f541497d73162305d48b638d9b87e1ae3 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 13 Apr 2012 13:11:50 +0100 Subject: ARM: 7366/3: amba: Remove AMBA level regulator support The AMBA bus regulator support is being used to model on/off switches for power domains which isn't terribly idiomatic for modern kernels with the generic power domain code and creates integration problems on platforms which don't use regulators for their power domains as it's hard to tell the difference between a regulator that is needed but failed to be provided and one that isn't supposed to be there (though DT does make that easier). Platforms that wish to use the regulator API to manage their power domains can indirect via the power domain interface. This feature is only used with the vape supply of the db8500 PRCMU driver which supplies the UARTs and MMC controllers, none of which have support for managing vcore at runtime in mainline (only pl022 SPI controller does). Update that supply to have an always_on constraint until the power domain support for the system is updated so that it is enabled for these users, this is likely to have no impact on practical systems as probably at least one of these devices will be active and cause AMBA to hold the supply on anyway. Signed-off-by: Mark Brown Acked-by: Linus Walleij Tested-by: Shawn Guo Signed-off-by: Russell King --- include/linux/amba/bus.h | 7 ------- 1 file changed, 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h index 7847e197730a..8d54f79457ba 100644 --- a/include/linux/amba/bus.h +++ b/include/linux/amba/bus.h @@ -30,7 +30,6 @@ struct amba_device { struct device dev; struct resource res; struct clk *pclk; - struct regulator *vcore; u64 dma_mask; unsigned int periphid; unsigned int irq[AMBA_NR_IRQS]; @@ -75,12 +74,6 @@ void amba_release_regions(struct amba_device *); #define amba_pclk_disable(d) \ do { if (!IS_ERR((d)->pclk)) clk_disable((d)->pclk); } while (0) -#define amba_vcore_enable(d) \ - (IS_ERR((d)->vcore) ? 0 : regulator_enable((d)->vcore)) - -#define amba_vcore_disable(d) \ - do { if (!IS_ERR((d)->vcore)) regulator_disable((d)->vcore); } while (0) - /* Some drivers don't use the struct amba_device */ #define AMBA_CONFIG_BITS(a) (((a) >> 24) & 0xff) #define AMBA_REV_BITS(a) (((a) >> 20) & 0x0f) -- cgit v1.2.3 From ca8f4fb21d08747013cce9cf1840aa5bfc31f2d8 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Mon, 9 Apr 2012 00:24:02 +0000 Subject: skbuff: struct ubuf_info callback type safety The skb struct ubuf_info callback gets passed struct ubuf_info itself, not the arg value as the field name and the function signature seem to imply. Rename the arg field to ctx to match usage, add documentation and change the callback argument type to make usage clear and to have compiler check correctness. Signed-off-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- include/linux/skbuff.h | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 70a3f8d49118..775292a66fa4 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -238,11 +238,12 @@ enum { /* * The callback notifies userspace to release buffers when skb DMA is done in * lower device, the skb last reference should be 0 when calling this. - * The desc is used to track userspace buffer index. + * The ctx field is used to track device context. + * The desc field is used to track userspace buffer index. */ struct ubuf_info { - void (*callback)(void *); - void *arg; + void (*callback)(struct ubuf_info *); + void *ctx; unsigned long desc; }; -- cgit v1.2.3 From 2084c24a81413b75bc97e4bee56b32ffece70460 Mon Sep 17 00:00:00 2001 From: Lubos Lunak Date: Wed, 21 Mar 2012 14:08:24 +0100 Subject: do not export kernel's NULL #define to userspace MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit GCC's NULL is actually __null, which allows detecting some questionable NULL usage and warn about it. Moreover each platform/compiler should have its own stddef.h anyway (which is different from linux/stddef.h). So there's no good reason to leak kernel's NULL to userspace and override what the compiler provides. Signed-off-by: Luboš Luňák Acked-by: Arnd Bergmann Signed-off-by: Linus Torvalds --- include/linux/stddef.h | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/stddef.h b/include/linux/stddef.h index 6a40c76bdcf1..1747b6787b9e 100644 --- a/include/linux/stddef.h +++ b/include/linux/stddef.h @@ -3,14 +3,10 @@ #include +#ifdef __KERNEL__ + #undef NULL -#if defined(__cplusplus) -#define NULL 0 -#else #define NULL ((void *)0) -#endif - -#ifdef __KERNEL__ enum { false = 0, -- cgit v1.2.3 From 4accdff7a3e397b43e50f605ee561ba7994745c7 Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Mon, 2 Apr 2012 17:55:48 +0200 Subject: mfd : Fix dbx500 compilation error The ux500 default config enables the db5500 and the db8500. The incoming cpuidle driver uses the 'prcmu_enable_wakeups' and the 'prcmu_set_power_state' functions but these ones are defined but not implemented for the db5500, leading to an unresolved symbol error at link time. In order to compile, we have to disable the db5500 support which is not acceptable for the default config. I noticed there are also some other functions which are defined but not implemented. This patch fix this by removing the functions definitions and move out of the config section the empty functions which are normally used when the DB550 config is disabled. Only the functions which are not implemented are concerned by this modification. Signed-off-by: Daniel Lezcano Acked-by: Linus Walleij Signed-off-by: Samuel Ortiz --- include/linux/mfd/db5500-prcmu.h | 88 +++++++++++++++++----------------------- 1 file changed, 37 insertions(+), 51 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/db5500-prcmu.h b/include/linux/mfd/db5500-prcmu.h index 9890687f582d..5a049dfaf153 100644 --- a/include/linux/mfd/db5500-prcmu.h +++ b/include/linux/mfd/db5500-prcmu.h @@ -8,41 +8,14 @@ #ifndef __MFD_DB5500_PRCMU_H #define __MFD_DB5500_PRCMU_H -#ifdef CONFIG_MFD_DB5500_PRCMU - -void db5500_prcmu_early_init(void); -int db5500_prcmu_set_epod(u16 epod_id, u8 epod_state); -int db5500_prcmu_set_display_clocks(void); -int db5500_prcmu_disable_dsipll(void); -int db5500_prcmu_enable_dsipll(void); -int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); -int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size); -void db5500_prcmu_enable_wakeups(u32 wakeups); -int db5500_prcmu_request_clock(u8 clock, bool enable); -void db5500_prcmu_config_abb_event_readout(u32 abb_events); -void db5500_prcmu_get_abb_event_buffer(void __iomem **buf); -int prcmu_resetout(u8 resoutn, u8 state); -int db5500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, - bool keep_ap_pll); -int db5500_prcmu_config_esram0_deep_sleep(u8 state); -void db5500_prcmu_system_reset(u16 reset_code); -u16 db5500_prcmu_get_reset_code(void); -bool db5500_prcmu_is_ac_wake_requested(void); -int db5500_prcmu_set_arm_opp(u8 opp); -int db5500_prcmu_get_arm_opp(void); - -#else /* !CONFIG_UX500_SOC_DB5500 */ - -static inline void db5500_prcmu_early_init(void) {} - -static inline int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size) +static inline int prcmu_resetout(u8 resoutn, u8 state) { - return -ENOSYS; + return 0; } -static inline int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) +static inline int db5500_prcmu_set_epod(u16 epod_id, u8 epod_state) { - return -ENOSYS; + return 0; } static inline int db5500_prcmu_request_clock(u8 clock, bool enable) @@ -50,69 +23,82 @@ static inline int db5500_prcmu_request_clock(u8 clock, bool enable) return 0; } -static inline int db5500_prcmu_set_display_clocks(void) +static inline int db5500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, + bool keep_ap_pll) { return 0; } -static inline int db5500_prcmu_disable_dsipll(void) +static inline int db5500_prcmu_config_esram0_deep_sleep(u8 state) { return 0; } -static inline int db5500_prcmu_enable_dsipll(void) +static inline u16 db5500_prcmu_get_reset_code(void) { return 0; } -static inline int db5500_prcmu_config_esram0_deep_sleep(u8 state) +static inline bool db5500_prcmu_is_ac_wake_requested(void) { return 0; } -static inline void db5500_prcmu_enable_wakeups(u32 wakeups) {} - -static inline int prcmu_resetout(u8 resoutn, u8 state) +static inline int db5500_prcmu_set_arm_opp(u8 opp) { return 0; } -static inline int db5500_prcmu_set_epod(u16 epod_id, u8 epod_state) +static inline int db5500_prcmu_get_arm_opp(void) { return 0; } -static inline void db5500_prcmu_get_abb_event_buffer(void __iomem **buf) {} static inline void db5500_prcmu_config_abb_event_readout(u32 abb_events) {} -static inline int db5500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, - bool keep_ap_pll) -{ - return 0; -} +static inline void db5500_prcmu_get_abb_event_buffer(void __iomem **buf) {} static inline void db5500_prcmu_system_reset(u16 reset_code) {} -static inline u16 db5500_prcmu_get_reset_code(void) +static inline void db5500_prcmu_enable_wakeups(u32 wakeups) {} + +#ifdef CONFIG_MFD_DB5500_PRCMU + +void db5500_prcmu_early_init(void); +int db5500_prcmu_set_display_clocks(void); +int db5500_prcmu_disable_dsipll(void); +int db5500_prcmu_enable_dsipll(void); +int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); +int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size); + +#else /* !CONFIG_UX500_SOC_DB5500 */ + +static inline void db5500_prcmu_early_init(void) {} + +static inline int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size) { - return 0; + return -ENOSYS; } -static inline bool db5500_prcmu_is_ac_wake_requested(void) +static inline int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) { - return 0; + return -ENOSYS; } -static inline int db5500_prcmu_set_arm_opp(u8 opp) +static inline int db5500_prcmu_set_display_clocks(void) { return 0; } -static inline int db5500_prcmu_get_arm_opp(void) +static inline int db5500_prcmu_disable_dsipll(void) { return 0; } +static inline int db5500_prcmu_enable_dsipll(void) +{ + return 0; +} #endif /* CONFIG_MFD_DB5500_PRCMU */ -- cgit v1.2.3 From 8eaeb9393397be8eb700ab38a69c450975463b77 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Tue, 3 Apr 2012 11:56:51 +0300 Subject: mfd: Convert twl6040 to i2c driver, and separate it from twl core Complete the separation of the twl6040 from the twl core since it is a separate chip, not part of the twl6030 PMIC. Make the needed Kconfig changes for the depending drivers at the same time to avoid breaking the kernel build (vibra, ASoC components). Signed-off-by: Peter Ujfalusi Reviewed-by: Mark Brown Acked-by: Tony Lindgren Acked-by: Dmitry Torokhov Signed-off-by: Samuel Ortiz --- include/linux/i2c/twl.h | 12 ------------ include/linux/mfd/twl6040.h | 27 +++++++++++++++++++++++++++ 2 files changed, 27 insertions(+), 12 deletions(-) (limited to 'include/linux') diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h index 2463b6100333..1f90de0cfdbe 100644 --- a/include/linux/i2c/twl.h +++ b/include/linux/i2c/twl.h @@ -666,23 +666,11 @@ struct twl4030_codec_data { unsigned int check_defaults:1; unsigned int reset_registers:1; unsigned int hs_extmute:1; - u16 hs_left_step; - u16 hs_right_step; - u16 hf_left_step; - u16 hf_right_step; void (*set_hs_extmute)(int mute); }; struct twl4030_vibra_data { unsigned int coexist; - - /* twl6040 */ - unsigned int vibldrv_res; /* left driver resistance */ - unsigned int vibrdrv_res; /* right driver resistance */ - unsigned int viblmotor_res; /* left motor resistance */ - unsigned int vibrmotor_res; /* right motor resistance */ - int vddvibl_uV; /* VDDVIBL volt, set 0 for fixed reg */ - int vddvibr_uV; /* VDDVIBR volt, set 0 for fixed reg */ }; struct twl4030_audio_data { diff --git a/include/linux/mfd/twl6040.h b/include/linux/mfd/twl6040.h index 9bc9ac651dad..b15b5f03f5c4 100644 --- a/include/linux/mfd/twl6040.h +++ b/include/linux/mfd/twl6040.h @@ -174,8 +174,35 @@ #define TWL6040_SYSCLK_SEL_LPPLL 0 #define TWL6040_SYSCLK_SEL_HPPLL 1 +struct twl6040_codec_data { + u16 hs_left_step; + u16 hs_right_step; + u16 hf_left_step; + u16 hf_right_step; +}; + +struct twl6040_vibra_data { + unsigned int vibldrv_res; /* left driver resistance */ + unsigned int vibrdrv_res; /* right driver resistance */ + unsigned int viblmotor_res; /* left motor resistance */ + unsigned int vibrmotor_res; /* right motor resistance */ + int vddvibl_uV; /* VDDVIBL volt, set 0 for fixed reg */ + int vddvibr_uV; /* VDDVIBR volt, set 0 for fixed reg */ +}; + +struct twl6040_platform_data { + int audpwron_gpio; /* audio power-on gpio */ + unsigned int irq_base; + + struct twl6040_codec_data *codec; + struct twl6040_vibra_data *vibra; +}; + +struct regmap; + struct twl6040 { struct device *dev; + struct regmap *regmap; struct mutex mutex; struct mutex io_mutex; struct mutex irq_mutex; -- cgit v1.2.3 From d22053cdbd914a6c97ea101adf411a8fd7e282ad Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Mon, 16 Apr 2012 12:07:02 -0400 Subject: nfsd: include cld.h in the headers_install target The cld.h file contains the definition of the upcall format to talk with nfsdcld. When I added the file though, I neglected to add it to the headers-y target, so make headers_install wasn't installing it. Signed-off-by: Jeff Layton Signed-off-by: J. Bruce Fields --- include/linux/nfsd/Kbuild | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/nfsd/Kbuild b/include/linux/nfsd/Kbuild index b8d4001212b3..5b7d84ac954a 100644 --- a/include/linux/nfsd/Kbuild +++ b/include/linux/nfsd/Kbuild @@ -1,3 +1,4 @@ +header-y += cld.h header-y += debug.h header-y += export.h header-y += nfsfh.h -- cgit v1.2.3 From 82ea267f7dc853a5e6a724916a70a10656efdfc2 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Mon, 16 Apr 2012 21:24:32 +0200 Subject: mfd: Fix modular builds of rc5t583 regulator support The combination of commit 1b1247dd75aa5cf5fae54a3bec7280046e9c7957 "mfd: Add support for RICOH PMIC RC5T583" and commit 6ffc3270210efa2bea526953a142ffc908f5bd86 "regulator: Add support for RICOH PMIC RC5T583 regulator" are causing the i386 allmodconfig builds to fail with this: ERROR: "rc5t583_update" [drivers/regulator/rc5t583-regulator.ko] undefined! ERROR: "rc5t583_set_bits" [drivers/regulator/rc5t583-regulator.ko] undefined! ERROR: "rc5t583_clear_bits" [drivers/regulator/rc5t583-regulator.ko] undefined! ERROR: "rc5t583_read" [drivers/regulator/rc5t583-regulator.ko] undefined! and this: ERROR: "rc5t583_ext_power_req_config" [drivers/regulator/rc5t583-regulator.ko] undefined! For the 1st four, make the simple ops static inline, instead of polluting the namespace with trivial exports. For the last one, add an EXPORT_SYMBOL. Signed-off-by: Paul Gortmaker Signed-off-by: Samuel Ortiz --- include/linux/mfd/rc5t583.h | 47 +++++++++++++++++++++++++++++++++++++-------- 1 file changed, 39 insertions(+), 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/rc5t583.h b/include/linux/mfd/rc5t583.h index a2c61609d21d..0b64b19d81ab 100644 --- a/include/linux/mfd/rc5t583.h +++ b/include/linux/mfd/rc5t583.h @@ -26,6 +26,7 @@ #include #include +#include #define RC5T583_MAX_REGS 0xF8 @@ -279,14 +280,44 @@ struct rc5t583_platform_data { bool enable_shutdown; }; -int rc5t583_write(struct device *dev, u8 reg, uint8_t val); -int rc5t583_read(struct device *dev, uint8_t reg, uint8_t *val); -int rc5t583_set_bits(struct device *dev, unsigned int reg, - unsigned int bit_mask); -int rc5t583_clear_bits(struct device *dev, unsigned int reg, - unsigned int bit_mask); -int rc5t583_update(struct device *dev, unsigned int reg, - unsigned int val, unsigned int mask); +static inline int rc5t583_write(struct device *dev, uint8_t reg, uint8_t val) +{ + struct rc5t583 *rc5t583 = dev_get_drvdata(dev); + return regmap_write(rc5t583->regmap, reg, val); +} + +static inline int rc5t583_read(struct device *dev, uint8_t reg, uint8_t *val) +{ + struct rc5t583 *rc5t583 = dev_get_drvdata(dev); + unsigned int ival; + int ret; + ret = regmap_read(rc5t583->regmap, reg, &ival); + if (!ret) + *val = (uint8_t)ival; + return ret; +} + +static inline int rc5t583_set_bits(struct device *dev, unsigned int reg, + unsigned int bit_mask) +{ + struct rc5t583 *rc5t583 = dev_get_drvdata(dev); + return regmap_update_bits(rc5t583->regmap, reg, bit_mask, bit_mask); +} + +static inline int rc5t583_clear_bits(struct device *dev, unsigned int reg, + unsigned int bit_mask) +{ + struct rc5t583 *rc5t583 = dev_get_drvdata(dev); + return regmap_update_bits(rc5t583->regmap, reg, bit_mask, 0); +} + +static inline int rc5t583_update(struct device *dev, unsigned int reg, + unsigned int val, unsigned int mask) +{ + struct rc5t583 *rc5t583 = dev_get_drvdata(dev); + return regmap_update_bits(rc5t583->regmap, reg, mask, val); +} + int rc5t583_ext_power_req_config(struct device *dev, int deepsleep_id, int ext_pwr_req, int deepsleep_slot_nr); int rc5t583_irq_init(struct rc5t583 *rc5t583, int irq, int irq_base); -- cgit v1.2.3 From e4eb1ff61b323d6141614e5458a1f53c7046ff8e Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 20 Apr 2012 15:35:40 -0700 Subject: VM: add "vm_brk()" helper function It does the same thing as "do_brk()", except it handles the VM locking too. It turns out that all external callers want that anyway, so we can make do_brk() static to just mm/mmap.c while at it. Signed-off-by: Linus Torvalds --- include/linux/mm.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mm.h b/include/linux/mm.h index d8738a464b94..bfee4ad6680b 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1415,7 +1415,8 @@ out: extern int do_munmap(struct mm_struct *, unsigned long, size_t); -extern unsigned long do_brk(unsigned long, unsigned long); +/* These take the mm semaphore themselves */ +extern unsigned long vm_brk(unsigned long, unsigned long); /* truncate.c */ extern void truncate_inode_pages(struct address_space *, loff_t); -- cgit v1.2.3 From a46ef99d80817a167477ed1c8b4d90ee0c2e726f Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 20 Apr 2012 16:20:01 -0700 Subject: VM: add "vm_munmap()" helper function Like the vm_brk() function, this is the same as "do_munmap()", except it does the VM locking for the caller. Signed-off-by: Linus Torvalds --- include/linux/mm.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mm.h b/include/linux/mm.h index bfee4ad6680b..cb61950a3aa1 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1417,6 +1417,7 @@ extern int do_munmap(struct mm_struct *, unsigned long, size_t); /* These take the mm semaphore themselves */ extern unsigned long vm_brk(unsigned long, unsigned long); +extern int vm_munmap(struct mm_struct *, unsigned long, size_t); /* truncate.c */ extern void truncate_inode_pages(struct address_space *, loff_t); -- cgit v1.2.3 From 6be5ceb02e98eaf6cfc4f8b12a896d04023f340d Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 20 Apr 2012 17:13:58 -0700 Subject: VM: add "vm_mmap()" helper function This continues the theme started with vm_brk() and vm_munmap(): vm_mmap() does the same thing as do_mmap(), but additionally does the required VM locking. This uninlines (and rewrites it to be clearer) do_mmap(), which sadly duplicates it in mm/mmap.c and mm/nommu.c. But that way we don't have to export our internal do_mmap_pgoff() function. Some day we hopefully don't have to export do_mmap() either, if all modular users can become the simpler vm_mmap() instead. We're actually very close to that already, with the notable exception of the (broken) use in i810, and a couple of stragglers in binfmt_elf. Signed-off-by: Linus Torvalds --- include/linux/mm.h | 23 ++++++----------------- 1 file changed, 6 insertions(+), 17 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mm.h b/include/linux/mm.h index cb61950a3aa1..86a692c3b238 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1393,31 +1393,20 @@ extern int install_special_mapping(struct mm_struct *mm, extern unsigned long get_unmapped_area(struct file *, unsigned long, unsigned long, unsigned long, unsigned long); -extern unsigned long do_mmap_pgoff(struct file *file, unsigned long addr, - unsigned long len, unsigned long prot, - unsigned long flag, unsigned long pgoff); extern unsigned long mmap_region(struct file *file, unsigned long addr, unsigned long len, unsigned long flags, vm_flags_t vm_flags, unsigned long pgoff); - -static inline unsigned long do_mmap(struct file *file, unsigned long addr, - unsigned long len, unsigned long prot, - unsigned long flag, unsigned long offset) -{ - unsigned long ret = -EINVAL; - if ((offset + PAGE_ALIGN(len)) < offset) - goto out; - if (!(offset & ~PAGE_MASK)) - ret = do_mmap_pgoff(file, addr, len, prot, flag, offset >> PAGE_SHIFT); -out: - return ret; -} - +extern unsigned long do_mmap(struct file *, unsigned long, + unsigned long, unsigned long, + unsigned long, unsigned long); extern int do_munmap(struct mm_struct *, unsigned long, size_t); /* These take the mm semaphore themselves */ extern unsigned long vm_brk(unsigned long, unsigned long); extern int vm_munmap(struct mm_struct *, unsigned long, size_t); +extern unsigned long vm_mmap(struct file *, unsigned long, + unsigned long, unsigned long, + unsigned long, unsigned long); /* truncate.c */ extern void truncate_inode_pages(struct address_space *, loff_t); -- cgit v1.2.3 From 32d317c60e56c2a34463b51fc0336cc96b3e1735 Mon Sep 17 00:00:00 2001 From: Chuanxiao Dong Date: Wed, 11 Apr 2012 19:54:38 +0800 Subject: mmc: remove MMC bus legacy suspend/resume method MMC bus is using legacy suspend/resume method, which is not compatible if runtime pm callbacks are used. In this scenario, MMC bus suspend/resume callbacks cannot be called when system entering S3. So change to use the new defined dev_pm_ops for system sleeping mode. Tested on AM335x Platform. Solves major issue/crash reported at http://www.mail-archive.com/linux-omap@vger.kernel.org/msg65425.html Signed-off-by: Chuanxiao Dong Tested-by: Hebbar, Gururaja Acked-by: Linus Walleij Acked-by: Ulf Hansson Signed-off-by: Chris Ball --- include/linux/mmc/card.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 01beae78f079..629b823f8836 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -481,7 +481,7 @@ struct mmc_driver { struct device_driver drv; int (*probe)(struct mmc_card *); void (*remove)(struct mmc_card *); - int (*suspend)(struct mmc_card *, pm_message_t); + int (*suspend)(struct mmc_card *); int (*resume)(struct mmc_card *); }; -- cgit v1.2.3 From 95b72eb0bdef6476b7e73061f0382adf46c5495a Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Fri, 20 Apr 2012 19:24:51 -0400 Subject: NFSv4: Ensure we do not reuse open owner names The NFSv4 spec is ambiguous about whether or not it is permissible to reuse open owner names, so play it safe. This patch adds a timestamp to the state_owner structure, and combines that with the IDA based uniquifier. Fixes a regression whereby the Linux server returns NFS4ERR_BAD_SEQID. Signed-off-by: Trond Myklebust --- include/linux/nfs_xdr.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index bfd0d1bf6707..7ba3551a0414 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -312,6 +312,11 @@ struct nfs4_layoutreturn { int rpc_status; }; +struct stateowner_id { + __u64 create_time; + __u32 uniquifier; +}; + /* * Arguments to the open call. */ @@ -321,7 +326,7 @@ struct nfs_openargs { int open_flags; fmode_t fmode; __u64 clientid; - __u64 id; + struct stateowner_id id; union { struct { struct iattr * attrs; /* UNCHECKED, GUARDED */ -- cgit v1.2.3 From bfce281c287a427d0841fadf5d59242757b4e620 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 20 Apr 2012 21:57:04 -0400 Subject: kill mm argument of vm_munmap() it's always current->mm Signed-off-by: Al Viro --- include/linux/mm.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mm.h b/include/linux/mm.h index 86a692c3b238..74aa71bea1e4 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1403,7 +1403,7 @@ extern int do_munmap(struct mm_struct *, unsigned long, size_t); /* These take the mm semaphore themselves */ extern unsigned long vm_brk(unsigned long, unsigned long); -extern int vm_munmap(struct mm_struct *, unsigned long, size_t); +extern int vm_munmap(unsigned long, size_t); extern unsigned long vm_mmap(struct file *, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long); -- cgit v1.2.3 From 3fca40c704dd013797f2c0c518f37cd2cc8e19fe Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 19 Apr 2012 17:29:42 +0000 Subject: irq: Add IRQ_TYPE_DEFAULT for use by PIC drivers This is meant typically to allow a PIC driver's irq domain map() callback to establish sane defaults for the interrupt (and make sure that the HW and the irq_desc are in sync as far as the trigger is concerned). The irq core may not call the set_trigger callback if it thinks the trigger is already set to the right setting, so we need to ensure new descriptors are properly synchronized with the hardware. Signed-off-by: Benjamin Herrenschmidt --- include/linux/irq.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/irq.h b/include/linux/irq.h index 7810406f3d80..b27cfcfd3a59 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -49,6 +49,12 @@ typedef void (*irq_preflow_handler_t)(struct irq_data *data); * IRQ_TYPE_LEVEL_LOW - low level triggered * IRQ_TYPE_LEVEL_MASK - Mask to filter out the level bits * IRQ_TYPE_SENSE_MASK - Mask for all the above bits + * IRQ_TYPE_DEFAULT - For use by some PICs to ask irq_set_type + * to setup the HW to a sane default (used + * by irqdomain map() callbacks to synchronize + * the HW state and SW flags for a newly + * allocated descriptor). + * * IRQ_TYPE_PROBE - Special flag for probing in progress * * Bits which can be modified via irq_set/clear/modify_status_flags() @@ -77,6 +83,7 @@ enum { IRQ_TYPE_LEVEL_LOW = 0x00000008, IRQ_TYPE_LEVEL_MASK = (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH), IRQ_TYPE_SENSE_MASK = 0x0000000f, + IRQ_TYPE_DEFAULT = IRQ_TYPE_SENSE_MASK, IRQ_TYPE_PROBE = 0x00000010, -- cgit v1.2.3 From 5a218ceba7b64f506bf4f004b04bb457c1805a62 Mon Sep 17 00:00:00 2001 From: Carlos Chinea Date: Wed, 4 Apr 2012 14:11:45 +0300 Subject: HSI: hsi: Rework hsi_controller release Use the proper release mechanism for hsi_controller and hsi_ports structures. Free the structures through their associated device release callbacks. Signed-off-by: Carlos Chinea Acked-by: Greg Kroah-Hartman Acked-by: Linus Walleij --- include/linux/hsi/hsi.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/hsi/hsi.h b/include/linux/hsi/hsi.h index 4b178067f405..7f3b7262a2b6 100644 --- a/include/linux/hsi/hsi.h +++ b/include/linux/hsi/hsi.h @@ -270,13 +270,13 @@ struct hsi_controller { struct module *owner; unsigned int id; unsigned int num_ports; - struct hsi_port *port; + struct hsi_port **port; }; #define to_hsi_controller(dev) container_of(dev, struct hsi_controller, device) struct hsi_controller *hsi_alloc_controller(unsigned int n_ports, gfp_t flags); -void hsi_free_controller(struct hsi_controller *hsi); +void hsi_put_controller(struct hsi_controller *hsi); int hsi_register_controller(struct hsi_controller *hsi); void hsi_unregister_controller(struct hsi_controller *hsi); @@ -294,7 +294,7 @@ static inline void *hsi_controller_drvdata(struct hsi_controller *hsi) static inline struct hsi_port *hsi_find_port_num(struct hsi_controller *hsi, unsigned int num) { - return (num < hsi->num_ports) ? &hsi->port[num] : NULL; + return (num < hsi->num_ports) ? hsi->port[num] : NULL; } /* -- cgit v1.2.3 From ec1c56ff813a198d656d4aa42e5de03e45751bf8 Mon Sep 17 00:00:00 2001 From: Carlos Chinea Date: Wed, 11 Apr 2012 10:55:53 +0300 Subject: HSI: hsi: Rework hsi_event interface Remove custom hack and make use of the notifier chain interfaces for delivering events from the ports to their associated clients. Clients that want to receive port events need to register their callbacks using hsi_register_port_event(). The callbacks can be called in interrupt context. Use hsi_unregestier_port_event() to undo the registration. Signed-off-by: Carlos Chinea Acked-by: Greg Kroah-Hartman Acked-by: Linus Walleij --- include/linux/hsi/hsi.h | 25 ++++++++++++++----------- 1 file changed, 14 insertions(+), 11 deletions(-) (limited to 'include/linux') diff --git a/include/linux/hsi/hsi.h b/include/linux/hsi/hsi.h index 7f3b7262a2b6..56fae865e272 100644 --- a/include/linux/hsi/hsi.h +++ b/include/linux/hsi/hsi.h @@ -26,9 +26,9 @@ #include #include #include -#include #include #include +#include /* HSI message ttype */ #define HSI_MSG_READ 0 @@ -121,18 +121,18 @@ static inline int hsi_register_board_info(struct hsi_board_info const *info, * @device: Driver model representation of the device * @tx_cfg: HSI TX configuration * @rx_cfg: HSI RX configuration - * @hsi_start_rx: Called after incoming wake line goes high - * @hsi_stop_rx: Called after incoming wake line goes low + * @e_handler: Callback for handling port events (RX Wake High/Low) + * @pclaimed: Keeps tracks if the clients claimed its associated HSI port + * @nb: Notifier block for port events */ struct hsi_client { struct device device; struct hsi_config tx_cfg; struct hsi_config rx_cfg; - void (*hsi_start_rx)(struct hsi_client *cl); - void (*hsi_stop_rx)(struct hsi_client *cl); /* private: */ + void (*ehandler)(struct hsi_client *, unsigned long); unsigned int pclaimed:1; - struct list_head link; + struct notifier_block nb; }; #define to_hsi_client(dev) container_of(dev, struct hsi_client, device) @@ -147,6 +147,10 @@ static inline void *hsi_client_drvdata(struct hsi_client *cl) return dev_get_drvdata(&cl->device); } +int hsi_register_port_event(struct hsi_client *cl, + void (*handler)(struct hsi_client *, unsigned long)); +int hsi_unregister_port_event(struct hsi_client *cl); + /** * struct hsi_client_driver - Driver associated to an HSI client * @driver: Driver model representation of the driver @@ -214,8 +218,7 @@ void hsi_free_msg(struct hsi_msg *msg); * @start_tx: Callback to inform that a client wants to TX data * @stop_tx: Callback to inform that a client no longer wishes to TX data * @release: Callback to inform that a client no longer uses the port - * @clients: List of hsi_clients using the port. - * @clock: Lock to serialize access to the clients list. + * @n_head: Notifier chain for signaling port events to the clients. */ struct hsi_port { struct device device; @@ -231,14 +234,14 @@ struct hsi_port { int (*start_tx)(struct hsi_client *cl); int (*stop_tx)(struct hsi_client *cl); int (*release)(struct hsi_client *cl); - struct list_head clients; - spinlock_t clock; + /* private */ + struct atomic_notifier_head n_head; }; #define to_hsi_port(dev) container_of(dev, struct hsi_port, device) #define hsi_get_port(cl) to_hsi_port((cl)->device.parent) -void hsi_event(struct hsi_port *port, unsigned int event); +int hsi_event(struct hsi_port *port, unsigned long event); int hsi_claim_port(struct hsi_client *cl, unsigned int share); void hsi_release_port(struct hsi_client *cl); -- cgit v1.2.3 From 151b61284776be2d6f02d48c23c3625678960b97 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 24 Apr 2012 14:07:22 -0400 Subject: USB: EHCI: fix crash during suspend on ASUS computers This patch (as1545) fixes a problem affecting several ASUS computers: The machine crashes or corrupts memory when going into suspend if the ehci-hcd driver is bound to any controllers. Users have been forced to unbind or unload ehci-hcd before putting their systems to sleep. After extensive testing, it was determined that the machines don't like going into suspend when any EHCI controllers are in the PCI D3 power state. Presumably this is a firmware bug, but there's nothing we can do about it except to avoid putting the controllers in D3 during system sleep. The patch adds a new flag to indicate whether the problem is present, and avoids changing the controller's power state if the flag is set. Runtime suspend is unaffected; this matters only for system suspend. However as a side effect, the controller will not respond to remote wakeup requests while the system is asleep. Hence USB wakeup is not functional -- but of course, this is already true in the current state of affairs. This fixes Bugzilla #42728. Signed-off-by: Alan Stern Tested-by: Steven Rostedt Tested-by: Andrey Rahmatullin Tested-by: Oleksij Rempel (fishor) Cc: stable Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/hcd.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index 5de415707c23..d28cc78a38e4 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -126,6 +126,8 @@ struct usb_hcd { unsigned wireless:1; /* Wireless USB HCD */ unsigned authorized_default:1; unsigned has_tt:1; /* Integrated TT in root hub */ + unsigned broken_pci_sleep:1; /* Don't put the + controller in PCI-D3 for system sleep */ unsigned int irq; /* irq allocated */ void __iomem *regs; /* device memory/io */ -- cgit v1.2.3 From 904249aa68010c8e223263c922fcbb840a3f42e4 Mon Sep 17 00:00:00 2001 From: Ying Han Date: Wed, 25 Apr 2012 16:01:48 -0700 Subject: mm: fix up the vmscan stat in vmstat The "pgsteal" stat is confusing because it counts both direct reclaim as well as background reclaim. However, we have "kswapd_steal" which also counts background reclaim value. This patch fixes it and also makes it match the existng "pgscan_" stats. Test: pgsteal_kswapd_dma32 447623 pgsteal_kswapd_normal 42272677 pgsteal_kswapd_movable 0 pgsteal_direct_dma32 2801 pgsteal_direct_normal 44353270 pgsteal_direct_movable 0 Signed-off-by: Ying Han Reviewed-by: Rik van Riel Acked-by: Christoph Lameter Cc: Johannes Weiner Cc: Michal Hocko Cc: Mel Gorman Acked-by: KAMEZAWA Hiroyuki Cc: Hillf Danton Cc: Hugh Dickins Cc: Dan Magenheimer Reviewed-by: Minchan Kim Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/vm_event_item.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/vm_event_item.h b/include/linux/vm_event_item.h index 03b90cdc1921..06f8e3858251 100644 --- a/include/linux/vm_event_item.h +++ b/include/linux/vm_event_item.h @@ -26,13 +26,14 @@ enum vm_event_item { PGPGIN, PGPGOUT, PSWPIN, PSWPOUT, PGFREE, PGACTIVATE, PGDEACTIVATE, PGFAULT, PGMAJFAULT, FOR_ALL_ZONES(PGREFILL), - FOR_ALL_ZONES(PGSTEAL), + FOR_ALL_ZONES(PGSTEAL_KSWAPD), + FOR_ALL_ZONES(PGSTEAL_DIRECT), FOR_ALL_ZONES(PGSCAN_KSWAPD), FOR_ALL_ZONES(PGSCAN_DIRECT), #ifdef CONFIG_NUMA PGSCAN_ZONE_RECLAIM_FAILED, #endif - PGINODESTEAL, SLABS_SCANNED, KSWAPD_STEAL, KSWAPD_INODESTEAL, + PGINODESTEAL, SLABS_SCANNED, KSWAPD_INODESTEAL, KSWAPD_LOW_WMARK_HIT_QUICKLY, KSWAPD_HIGH_WMARK_HIT_QUICKLY, KSWAPD_SKIP_CONGESTION_WAIT, PAGEOUTRUN, ALLOCSTALL, PGROTATED, -- cgit v1.2.3 From b95ace54a23e2f8ebb032744cebb17c9f43bf651 Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Sun, 22 Apr 2012 13:37:24 +0200 Subject: ARM: pxa: fix gpio wakeup setting In 3.3, gpio wakeup setting was broken. The call enable_irq_wake() didn't set up the PXA gpio registers (PWER, ...) anymore. Fix it at least for pxa27x. The driver doesn't seem to be used in pxa25x (weird ...), and the fix doesn't extend to pxa3xx and pxa95x (which don't have a gpio_set_wake() available). Signed-off-by: Robert Jarzmik Signed-off-by: Haojian Zhuang --- include/linux/gpio-pxa.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/gpio-pxa.h b/include/linux/gpio-pxa.h index 05071ee34c3f..d755b28ba635 100644 --- a/include/linux/gpio-pxa.h +++ b/include/linux/gpio-pxa.h @@ -13,4 +13,8 @@ extern int pxa_last_gpio; extern int pxa_irq_to_gpio(int irq); +struct pxa_gpio_platform_data { + int (*gpio_set_wake)(unsigned int gpio, unsigned int on); +}; + #endif /* __GPIO_PXA_H */ -- cgit v1.2.3 From dbabe0d659d3cfe42830a779909ab3cd42f7b027 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 17 Apr 2012 17:03:50 -0700 Subject: spi: fix spi.h kernel-doc warning Fix kernel-doc warning in spi.h (copy/paste): Warning(include/linux/spi/spi.h:365): No description found for parameter 'unprepare_transfer_hardware' Signed-off-by: Randy Dunlap Signed-off-by: Grant Likely --- include/linux/spi/spi.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 98679b061b63..fa702aeb5038 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -254,7 +254,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * driver is finished with this message, it must call * spi_finalize_current_message() so the subsystem can issue the next * transfer - * @prepare_transfer_hardware: there are currently no more messages on the + * @unprepare_transfer_hardware: there are currently no more messages on the * queue so the subsystem notifies the driver that it may relax the * hardware by issuing this call * -- cgit v1.2.3 From 9883035ae7edef3ec62ad215611cb8e17d6a1a5d Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 29 Apr 2012 13:12:42 -0700 Subject: pipes: add a "packetized pipe" mode for writing The actual internal pipe implementation is already really about individual packets (called "pipe buffers"), and this simply exposes that as a special packetized mode. When we are in the packetized mode (marked by O_DIRECT as suggested by Alan Cox), a write() on a pipe will not merge the new data with previous writes, so each write will get a pipe buffer of its own. The pipe buffer is then marked with the PIPE_BUF_FLAG_PACKET flag, which in turn will tell the reader side to break the read at that boundary (and throw away any partial packet contents that do not fit in the read buffer). End result: as long as you do writes less than PIPE_BUF in size (so that the pipe doesn't have to split them up), you can now treat the pipe as a packet interface, where each read() system call will read one packet at a time. You can just use a sufficiently big read buffer (PIPE_BUF is sufficient, since bigger than that doesn't guarantee atomicity anyway), and the return value of the read() will naturally give you the size of the packet. NOTE! We do not support zero-sized packets, and zero-sized reads and writes to a pipe continue to be no-ops. Also note that big packets will currently be split at write time, but that the size at which that happens is not really specified (except that it's bigger than PIPE_BUF). Currently that limit is the system page size, but we might want to explicitly support bigger packets some day. The main user for this is going to be the autofs packet interface, allowing us to stop having to care so deeply about exact packet sizes (which have had bugs with 32/64-bit compatibility modes). But user space can create packetized pipes with "pipe2(fd, O_DIRECT)", which will fail with an EINVAL on kernels that do not support this interface. Tested-by: Michael Tokarev Cc: Alan Cox Cc: David Miller Cc: Ian Kent Cc: Thomas Meyer Cc: stable@kernel.org # needed for systemd/autofs interaction fix Signed-off-by: Linus Torvalds --- include/linux/pipe_fs_i.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/pipe_fs_i.h b/include/linux/pipe_fs_i.h index 6d626ff0cfd0..e1ac1ce16fb0 100644 --- a/include/linux/pipe_fs_i.h +++ b/include/linux/pipe_fs_i.h @@ -6,6 +6,7 @@ #define PIPE_BUF_FLAG_LRU 0x01 /* page is on the LRU */ #define PIPE_BUF_FLAG_ATOMIC 0x02 /* was atomically mapped */ #define PIPE_BUF_FLAG_GIFT 0x04 /* page is a gift */ +#define PIPE_BUF_FLAG_PACKET 0x08 /* read() as a packet */ /** * struct pipe_buffer - a linux kernel pipe buffer -- cgit v1.2.3