From 202f4f53e503ae09b431459131b5b3a99fa6d839 Mon Sep 17 00:00:00 2001 From: MyungJoo Ham Date: Fri, 20 Aug 2010 14:43:56 +0900 Subject: MAX8952 PMIC Driver Initial Release MAX8952 PMIC is used to provide voltage output between 770mV - 1400mV with DVS support. In this initial release, users can set voltages for four DVS modes, RAMP delay values, and SYNC frequency. Controlling FPWM/SYNC_MODE/Pull-Down/Ramp Modes and reading CHIP_ID is not supported in this release. If GPIO of EN is not valid in platform data, the driver assumes that it is always-on. If GPIO of VID0 or VID1 is invalid, the driver pulls down VID0 and VID1 to fix DVS mode as 0 and disables DVS support. We assume that V_OUT is capable to provide every voltage from 770mV to 1.40V in 10mV steps although the data sheet has some ambiguity on it. Signed-off-by: MyungJoo Ham Signed-off-by: Kyungmin Park Acked-by: Mark Brown -- v2: - Style correction - Can accept platform_data with invalid GPIOs - Removed unnecessary features - Improved error handling Signed-off-by: Liam Girdwood --- include/linux/regulator/max8952.h | 135 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 135 insertions(+) create mode 100644 include/linux/regulator/max8952.h (limited to 'include/linux') diff --git a/include/linux/regulator/max8952.h b/include/linux/regulator/max8952.h new file mode 100644 index 000000000000..45e42855ad05 --- /dev/null +++ b/include/linux/regulator/max8952.h @@ -0,0 +1,135 @@ +/* + * max8952.h - Voltage regulation for the Maxim 8952 + * + * Copyright (C) 2010 Samsung Electrnoics + * MyungJoo Ham + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef REGULATOR_MAX8952 +#define REGULATOR_MAX8952 + +#include + +enum { + MAX8952_DVS_MODE0, + MAX8952_DVS_MODE1, + MAX8952_DVS_MODE2, + MAX8952_DVS_MODE3, +}; + +enum { + MAX8952_DVS_770mV = 0, + MAX8952_DVS_780mV, + MAX8952_DVS_790mV, + MAX8952_DVS_800mV, + MAX8952_DVS_810mV, + MAX8952_DVS_820mV, + MAX8952_DVS_830mV, + MAX8952_DVS_840mV, + MAX8952_DVS_850mV, + MAX8952_DVS_860mV, + MAX8952_DVS_870mV, + MAX8952_DVS_880mV, + MAX8952_DVS_890mV, + MAX8952_DVS_900mV, + MAX8952_DVS_910mV, + MAX8952_DVS_920mV, + MAX8952_DVS_930mV, + MAX8952_DVS_940mV, + MAX8952_DVS_950mV, + MAX8952_DVS_960mV, + MAX8952_DVS_970mV, + MAX8952_DVS_980mV, + MAX8952_DVS_990mV, + MAX8952_DVS_1000mV, + MAX8952_DVS_1010mV, + MAX8952_DVS_1020mV, + MAX8952_DVS_1030mV, + MAX8952_DVS_1040mV, + MAX8952_DVS_1050mV, + MAX8952_DVS_1060mV, + MAX8952_DVS_1070mV, + MAX8952_DVS_1080mV, + MAX8952_DVS_1090mV, + MAX8952_DVS_1100mV, + MAX8952_DVS_1110mV, + MAX8952_DVS_1120mV, + MAX8952_DVS_1130mV, + MAX8952_DVS_1140mV, + MAX8952_DVS_1150mV, + MAX8952_DVS_1160mV, + MAX8952_DVS_1170mV, + MAX8952_DVS_1180mV, + MAX8952_DVS_1190mV, + MAX8952_DVS_1200mV, + MAX8952_DVS_1210mV, + MAX8952_DVS_1220mV, + MAX8952_DVS_1230mV, + MAX8952_DVS_1240mV, + MAX8952_DVS_1250mV, + MAX8952_DVS_1260mV, + MAX8952_DVS_1270mV, + MAX8952_DVS_1280mV, + MAX8952_DVS_1290mV, + MAX8952_DVS_1300mV, + MAX8952_DVS_1310mV, + MAX8952_DVS_1320mV, + MAX8952_DVS_1330mV, + MAX8952_DVS_1340mV, + MAX8952_DVS_1350mV, + MAX8952_DVS_1360mV, + MAX8952_DVS_1370mV, + MAX8952_DVS_1380mV, + MAX8952_DVS_1390mV, + MAX8952_DVS_1400mV, +}; + +enum { + MAX8952_SYNC_FREQ_26MHZ, /* Default */ + MAX8952_SYNC_FREQ_13MHZ, + MAX8952_SYNC_FREQ_19_2MHZ, +}; + +enum { + MAX8952_RAMP_32mV_us = 0, /* Default */ + MAX8952_RAMP_16mV_us, + MAX8952_RAMP_8mV_us, + MAX8952_RAMP_4mV_us, + MAX8952_RAMP_2mV_us, + MAX8952_RAMP_1mV_us, + MAX8952_RAMP_0_5mV_us, + MAX8952_RAMP_0_25mV_us, +}; + +#define MAX8952_NUM_DVS_MODE 4 + +struct max8952_platform_data { + int gpio_vid0; + int gpio_vid1; + int gpio_en; + + u8 default_mode; + u8 dvs_mode[MAX8952_NUM_DVS_MODE]; /* MAX8952_DVS_MODEx_XXXXmV */ + + u8 sync_freq; + u8 ramp_speed; + + struct regulator_init_data reg_data; +}; + + +#endif /* REGULATOR_MAX8952 */ -- cgit v1.2.3 From 5976f0959d5251ae5b4db848eaa2f42a19e98652 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 16 Sep 2010 16:48:49 +0800 Subject: Regulator: LP3972 PMIC regulator driver This patch adds regulator drivers for National Semiconductors LP3972 PMIC. This LP3972 PMIC controller has 3 DC/DC voltage converters and 5 low drop-out (LDO) regulators. LP3972 PMIC controller uses I2C interface. Signed-off-by: Axel Lin Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- include/linux/regulator/lp3972.h | 48 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) create mode 100644 include/linux/regulator/lp3972.h (limited to 'include/linux') diff --git a/include/linux/regulator/lp3972.h b/include/linux/regulator/lp3972.h new file mode 100644 index 000000000000..9bb7389b7a1e --- /dev/null +++ b/include/linux/regulator/lp3972.h @@ -0,0 +1,48 @@ +/* + * National Semiconductors LP3972 PMIC chip client interface + * + * Based on lp3971.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __LINUX_REGULATOR_LP3972_H +#define __LINUX_REGULATOR_LP3972_H + +#include + +#define LP3972_LDO1 0 +#define LP3972_LDO2 1 +#define LP3972_LDO3 2 +#define LP3972_LDO4 3 +#define LP3972_LDO5 4 + +#define LP3972_DCDC1 5 +#define LP3972_DCDC2 6 +#define LP3972_DCDC3 7 + +#define LP3972_NUM_REGULATORS 8 + +struct lp3972_regulator_subdev { + int id; + struct regulator_init_data *initdata; +}; + +struct lp3972_platform_data { + int num_regulators; + struct lp3972_regulator_subdev *regulators; +}; + +#endif -- cgit v1.2.3 From 688fe99a439f7c9dfcc52fbf7cb347f140a2dc8b Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 5 Oct 2010 19:18:32 -0700 Subject: regulator: Add option for machine drivers to enable the dummy regulator Allow machine drivers to explicitly enable the use of the dummy regulator, enabling simpler support for systems with only a few specific supplies visible to software. It is strongly recommended that this is not used on systems with substantial software control over their PMICs, for maximum functionality constrints should be as fully specified as possible. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- include/linux/regulator/machine.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index e2980287245e..761c745b9c24 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -189,10 +189,15 @@ int regulator_suspend_prepare(suspend_state_t state); #ifdef CONFIG_REGULATOR void regulator_has_full_constraints(void); +void regulator_use_dummy_regulator(void); #else static inline void regulator_has_full_constraints(void) { } + +static inline void regulator_use_dummy_regulator(void) +{ +} #endif #endif -- cgit v1.2.3