From 12a1c9353c47c0fb3464eba2d78cdf649dee1cf7 Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Mon, 27 Oct 2025 09:27:32 +0900 Subject: block: fix op_is_zone_mgmt() to handle REQ_OP_ZONE_RESET_ALL REQ_OP_ZONE_RESET_ALL is a zone management request. Fix op_is_zone_mgmt() to return true for that operation, like it already does for REQ_OP_ZONE_RESET. While no problems were reported without this fix, this change allows strengthening checks in various block device drivers (scsi sd, virtioblk, DM) where op_is_zone_mgmt() is used to verify that a zone management command is not being issued to a regular block device. Fixes: 6c1b1da58f8c ("block: add zone open, close and finish operations") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Reviewed-by: Chaitanya Kulkarni Reviewed-by: Christoph Hellwig Reviewed-by: Johannes Thumshirn Signed-off-by: Jens Axboe --- include/linux/blk_types.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h index 8e8d1cc8b06c..d8ba743a89b7 100644 --- a/include/linux/blk_types.h +++ b/include/linux/blk_types.h @@ -478,6 +478,7 @@ static inline bool op_is_zone_mgmt(enum req_op op) { switch (op & REQ_OP_MASK) { case REQ_OP_ZONE_RESET: + case REQ_OP_ZONE_RESET_ALL: case REQ_OP_ZONE_OPEN: case REQ_OP_ZONE_CLOSE: case REQ_OP_ZONE_FINISH: -- cgit v1.2.3 From 19de03b312d69a7e9bacb51c806c6e3f4207376c Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Mon, 27 Oct 2025 09:27:33 +0900 Subject: block: make REQ_OP_ZONE_OPEN a write operation A REQ_OP_OPEN_ZONE request changes the condition of a sequential zone of a zoned block device to the explicitly open condition (BLK_ZONE_COND_EXP_OPEN). As such, it should be considered a write operation. Change this operation code to be an odd number to reflect this. The following operation numbers are changed to keep the numbering compact. No problems were reported without this change as this operation has no data. However, this unifies the zone operation to reflect that they modify the device state and also allows strengthening checks in the block layer, e.g. checking if this operation is not issued against a read-only device. Fixes: 6c1b1da58f8c ("block: add zone open, close and finish operations") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Reviewed-by: Chaitanya Kulkarni Reviewed-by: Christoph Hellwig Reviewed-by: Johannes Thumshirn Signed-off-by: Jens Axboe --- include/linux/blk_types.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h index d8ba743a89b7..44c30183ecc3 100644 --- a/include/linux/blk_types.h +++ b/include/linux/blk_types.h @@ -341,15 +341,15 @@ enum req_op { /* write the zero filled sector many times */ REQ_OP_WRITE_ZEROES = (__force blk_opf_t)9, /* Open a zone */ - REQ_OP_ZONE_OPEN = (__force blk_opf_t)10, + REQ_OP_ZONE_OPEN = (__force blk_opf_t)11, /* Close a zone */ - REQ_OP_ZONE_CLOSE = (__force blk_opf_t)11, + REQ_OP_ZONE_CLOSE = (__force blk_opf_t)13, /* Transition a zone to full */ - REQ_OP_ZONE_FINISH = (__force blk_opf_t)13, + REQ_OP_ZONE_FINISH = (__force blk_opf_t)15, /* reset a zone write pointer */ - REQ_OP_ZONE_RESET = (__force blk_opf_t)15, + REQ_OP_ZONE_RESET = (__force blk_opf_t)17, /* reset all the zone present on the device */ - REQ_OP_ZONE_RESET_ALL = (__force blk_opf_t)17, + REQ_OP_ZONE_RESET_ALL = (__force blk_opf_t)19, /* Driver private requests */ REQ_OP_DRV_IN = (__force blk_opf_t)34, -- cgit v1.2.3 From 48cbf50531d8eca15b8a811717afdebb8677de9b Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Fri, 24 Oct 2025 16:23:44 +0800 Subject: regmap: irq: Correct documentation of wake_invert flag Per commit 9442490a0286 ("regmap: irq: Support wake IRQ mask inversion") the wake_invert flag is to support enable register, so cleared bits are wake disabled. Fixes: 68622bdfefb9 ("regmap: irq: document mask/wake_invert flags") Cc: stable@vger.kernel.org Signed-off-by: Shawn Guo Link: https://patch.msgid.link/20251024082344.2188895-1-shawnguo2@yeah.net Signed-off-by: Mark Brown --- include/linux/regmap.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/regmap.h b/include/linux/regmap.h index 4e1ac1fbcec4..55343795644b 100644 --- a/include/linux/regmap.h +++ b/include/linux/regmap.h @@ -1643,7 +1643,7 @@ struct regmap_irq_chip_data; * @status_invert: Inverted status register: cleared bits are active interrupts. * @status_is_level: Status register is actuall signal level: Xor status * register with previous value to get active interrupts. - * @wake_invert: Inverted wake register: cleared bits are wake enabled. + * @wake_invert: Inverted wake register: cleared bits are wake disabled. * @type_in_mask: Use the mask registers for controlling irq type. Use this if * the hardware provides separate bits for rising/falling edge * or low/high level interrupts and they should be combined into -- cgit v1.2.3 From a1f3058930745d2b938b6b4f5bd9630dc74b26b7 Mon Sep 17 00:00:00 2001 From: Quanmin Yan Date: Fri, 10 Oct 2025 16:16:59 +0800 Subject: fbcon: Set fb_display[i]->mode to NULL when the mode is released Recently, we discovered the following issue through syzkaller: BUG: KASAN: slab-use-after-free in fb_mode_is_equal+0x285/0x2f0 Read of size 4 at addr ff11000001b3c69c by task syz.xxx ... Call Trace: dump_stack_lvl+0xab/0xe0 print_address_description.constprop.0+0x2c/0x390 print_report+0xb9/0x280 kasan_report+0xb8/0xf0 fb_mode_is_equal+0x285/0x2f0 fbcon_mode_deleted+0x129/0x180 fb_set_var+0xe7f/0x11d0 do_fb_ioctl+0x6a0/0x750 fb_ioctl+0xe0/0x140 __x64_sys_ioctl+0x193/0x210 do_syscall_64+0x5f/0x9c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Based on experimentation and analysis, during framebuffer unregistration, only the memory of fb_info->modelist is freed, without setting the corresponding fb_display[i]->mode to NULL for the freed modes. This leads to UAF issues during subsequent accesses. Here's an example of reproduction steps: 1. With /dev/fb0 already registered in the system, load a kernel module to register a new device /dev/fb1; 2. Set fb1's mode to the global fb_display[] array (via FBIOPUT_CON2FBMAP); 3. Switch console from fb to VGA (to allow normal rmmod of the ko); 4. Unload the kernel module, at this point fb1's modelist is freed, leaving a wild pointer in fb_display[]; 5. Trigger the bug via system calls through fb0 attempting to delete a mode from fb0. Add a check in do_unregister_framebuffer(): if the mode to be freed exists in fb_display[], set the corresponding mode pointer to NULL. Signed-off-by: Quanmin Yan Reviewed-by: Thomas Zimmermann Signed-off-by: Helge Deller Cc: stable@vger.kernel.org --- include/linux/fbcon.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/fbcon.h b/include/linux/fbcon.h index 81f0e698acbf..f206370060e1 100644 --- a/include/linux/fbcon.h +++ b/include/linux/fbcon.h @@ -18,6 +18,7 @@ void fbcon_suspended(struct fb_info *info); void fbcon_resumed(struct fb_info *info); int fbcon_mode_deleted(struct fb_info *info, struct fb_videomode *mode); +void fbcon_delete_modelist(struct list_head *head); void fbcon_new_modelist(struct fb_info *info); void fbcon_get_requirement(struct fb_info *info, struct fb_blit_caps *caps); @@ -38,6 +39,7 @@ static inline void fbcon_suspended(struct fb_info *info) {} static inline void fbcon_resumed(struct fb_info *info) {} static inline int fbcon_mode_deleted(struct fb_info *info, struct fb_videomode *mode) { return 0; } +static inline void fbcon_delete_modelist(struct list_head *head) {} static inline void fbcon_new_modelist(struct fb_info *info) {} static inline void fbcon_get_requirement(struct fb_info *info, struct fb_blit_caps *caps) {} -- cgit v1.2.3 From 14a7f2392f42bbb71c1a5ea68930006221fcd80a Mon Sep 17 00:00:00 2001 From: Yonghong Song Date: Wed, 29 Oct 2025 11:36:46 -0700 Subject: bpf: Make migrate_disable always inline to avoid partial inlining The build fails with llvm 21/22: $ make LLVM=1 -j ... LD vmlinux.o GEN .vmlinux.objs ... BTF .tmp_vmlinux1.btf.o ... AS .tmp_vmlinux2.kallsyms.o LD vmlinux.unstripped BTFIDS vmlinux.unstripped WARN: resolve_btfids: unresolved symbol migrate_enable WARN: resolve_btfids: unresolved symbol migrate_disable make[2]: *** [vmlinux.unstripped] Error 255 make[2]: *** Deleting file 'vmlinux.unstripped' make[1]: *** [Makefile:1242: vmlinux] Error 2 make: *** [Makefile:248: __sub-make] Error 2 Two functions with identical names but different addresses are considered ambiguous and removed by "pahole" from vmlinux BTF. Later resolve_btfids warns since it cannot find them. Commit 378b7708194f ("sched: Make migrate_{en,dis}able() inline") made them inlineable in most places, but in vmlinux built with llvm 21 and 22 there are four symbols for migrate_{enable,disable}: three static functions and one global function. Fix the issue by marking migrate_{enable,disable} as always inline. The alternative is to mark them as notrace/nokprobe which is more drastic. Only bpf programs are prevented from attaching to these functions. The rest of the tracing shouldn't be affected. [note: Peter ok-ed the patch, Alexei rewrote commit log] Fixes: 378b7708194f ("sched: Make migrate_{en,dis}able() inline") Signed-off-by: Yonghong Song Acked-by: Menglong Dong Link: https://lore.kernel.org/r/20251029183646.3811774-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov --- include/linux/sched.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index cbb7340c5866..b469878de25c 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -2407,12 +2407,12 @@ static inline void __migrate_enable(void) { } * be defined in kernel/sched/core.c. */ #ifndef INSTANTIATE_EXPORTED_MIGRATE_DISABLE -static inline void migrate_disable(void) +static __always_inline void migrate_disable(void) { __migrate_disable(); } -static inline void migrate_enable(void) +static __always_inline void migrate_enable(void) { __migrate_enable(); } -- cgit v1.2.3