From a9fd053b56c6bb14972ab7a19da0b575fe4c5d66 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 19 Nov 2015 10:15:17 +0100 Subject: iio: st_sensors: support active-low interrupts Most ST MEMS Sensors that support interrupts can also handle sending an active low interrupt, i.e. going from high to low on data ready (or other interrupt) and thus triggering on a falling edge to the interrupt controller. Set up logic to inspect the interrupt line we get for a sensor: if it is triggering on rising edge, leave everything alone, but if it triggers on falling edges, set up active low, and if unsupported configurations appear: warn with errors and reconfigure the interrupt to a rising edge, which all interrupt generating sensors support. Create a local header for st_sensors_core.h to share functions between the sensor core and the trigger setup code. Cc: Giuseppe Barba Cc: Denis Ciocca Signed-off-by: Linus Walleij Signed-off-by: Jonathan Cameron --- include/linux/iio/common/st_sensors.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h index 2fe939c73cd2..6670c3d25c58 100644 --- a/include/linux/iio/common/st_sensors.h +++ b/include/linux/iio/common/st_sensors.h @@ -119,6 +119,8 @@ struct st_sensor_bdu { * @addr: address of the register. * @mask_int1: mask to enable/disable IRQ on INT1 pin. * @mask_int2: mask to enable/disable IRQ on INT2 pin. + * @addr_ihl: address to enable/disable active low on the INT lines. + * @mask_ihl: mask to enable/disable active low on the INT lines. * struct ig1 - represents the Interrupt Generator 1 of sensors. * @en_addr: address of the enable ig1 register. * @en_mask: mask to write the on/off value for enable. @@ -127,6 +129,8 @@ struct st_sensor_data_ready_irq { u8 addr; u8 mask_int1; u8 mask_int2; + u8 addr_ihl; + u8 mask_ihl; struct { u8 en_addr; u8 en_mask; -- cgit v1.2.3 From 131497acd88a4456d99247cee457baefd2817835 Mon Sep 17 00:00:00 2001 From: Ricardo Ribalda Delgado Date: Sat, 16 Jan 2016 14:24:07 +0100 Subject: iio: add ad5761 DAC driver ad5761 is a 1-channel DAC with configurable output range. The driver uses the regulator interface for its voltage ref. It shares its register layout with ad5761r, ad5721 and ad5721r. Differences: ad5761* are 16 bit, ad5721* are 12 bits. ad57*1r have an internal reference. Signed-off-by: Ricardo Ribalda Delgado Signed-off-by: Jonathan Cameron --- include/linux/platform_data/ad5761.h | 44 ++++++++++++++++++++++++++++++++++++ 1 file changed, 44 insertions(+) create mode 100644 include/linux/platform_data/ad5761.h (limited to 'include/linux') diff --git a/include/linux/platform_data/ad5761.h b/include/linux/platform_data/ad5761.h new file mode 100644 index 000000000000..7bd8ed7d978e --- /dev/null +++ b/include/linux/platform_data/ad5761.h @@ -0,0 +1,44 @@ +/* + * AD5721, AD5721R, AD5761, AD5761R, Voltage Output Digital to Analog Converter + * + * Copyright 2016 Qtechnology A/S + * 2016 Ricardo Ribalda + * + * Licensed under the GPL-2. + */ +#ifndef __LINUX_PLATFORM_DATA_AD5761_H__ +#define __LINUX_PLATFORM_DATA_AD5761_H__ + +/** + * enum ad5761_voltage_range - Voltage range the AD5761 is configured for. + * @AD5761_VOLTAGE_RANGE_M10V_10V: -10V to 10V + * @AD5761_VOLTAGE_RANGE_0V_10V: 0V to 10V + * @AD5761_VOLTAGE_RANGE_M5V_5V: -5V to 5V + * @AD5761_VOLTAGE_RANGE_0V_5V: 0V to 5V + * @AD5761_VOLTAGE_RANGE_M2V5_7V5: -2.5V to 7.5V + * @AD5761_VOLTAGE_RANGE_M3V_3V: -3V to 3V + * @AD5761_VOLTAGE_RANGE_0V_16V: 0V to 16V + * @AD5761_VOLTAGE_RANGE_0V_20V: 0V to 20V + */ + +enum ad5761_voltage_range { + AD5761_VOLTAGE_RANGE_M10V_10V, + AD5761_VOLTAGE_RANGE_0V_10V, + AD5761_VOLTAGE_RANGE_M5V_5V, + AD5761_VOLTAGE_RANGE_0V_5V, + AD5761_VOLTAGE_RANGE_M2V5_7V5, + AD5761_VOLTAGE_RANGE_M3V_3V, + AD5761_VOLTAGE_RANGE_0V_16V, + AD5761_VOLTAGE_RANGE_0V_20V, +}; + +/** + * struct ad5761_platform_data - AD5761 DAC driver platform data + * @voltage_range: Voltage range the AD5761 is configured for + */ + +struct ad5761_platform_data { + enum ad5761_voltage_range voltage_range; +}; + +#endif -- cgit v1.2.3 From b55b54b5db330e36cd465adb3fbe274ffb1061d3 Mon Sep 17 00:00:00 2001 From: Gustavo Padovan Date: Thu, 21 Jan 2016 10:49:21 -0200 Subject: staging/android: remove struct sync_pt struct sync_pt was just wrapping around struct fence and creating an extra abstraction layer. The only two members of struct sync_pt, child_list and active_list, were moved to struct fence in an earlier commit. After removing those two members struct sync_pt is nothing more than struct fence, so remove it all and use struct fence directly. Signed-off-by: Gustavo Padovan Reviewed-by: Maarten Lankhorst Signed-off-by: Greg Kroah-Hartman --- include/linux/fence.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/fence.h b/include/linux/fence.h index bb522011383b..605bd88246a6 100644 --- a/include/linux/fence.h +++ b/include/linux/fence.h @@ -79,6 +79,8 @@ struct fence { unsigned long flags; ktime_t timestamp; int status; + struct list_head child_list; + struct list_head active_list; }; enum fence_flag_bits { -- cgit v1.2.3 From 9b1b282ccd8195e3264dbb3cd15b9d60b6345230 Mon Sep 17 00:00:00 2001 From: "J. German Rivera" Date: Wed, 6 Jan 2016 16:03:19 -0600 Subject: irqdomain: Added domain bus token DOMAIN_BUS_FSL_MC_MSI Since an FSL-MC bus is a new bus type that is neither PCI nor PLATFORM, we need a new domain bus token to disambiguate the IRQ domain for FSL-MC MSIs. Signed-off-by: J. German Rivera Signed-off-by: Greg Kroah-Hartman --- include/linux/irqdomain.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h index 04579d9fbce4..0934d06c8b00 100644 --- a/include/linux/irqdomain.h +++ b/include/linux/irqdomain.h @@ -74,6 +74,7 @@ enum irq_domain_bus_token { DOMAIN_BUS_PCI_MSI, DOMAIN_BUS_PLATFORM_MSI, DOMAIN_BUS_NEXUS, + DOMAIN_BUS_FSL_MC_MSI, }; /** -- cgit v1.2.3 From 550308e48cddbc2aa74f7236941b17b55b2e78e9 Mon Sep 17 00:00:00 2001 From: "J. German Rivera" Date: Wed, 6 Jan 2016 16:03:20 -0600 Subject: fsl-mc: msi: Added FSL-MC-specific member to the msi_desc's union FSL-MC is a bus type different from PCI and platform, so it needs its own member in the msi_desc's union. Signed-off-by: J. German Rivera Signed-off-by: Greg Kroah-Hartman --- include/linux/msi.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/linux') diff --git a/include/linux/msi.h b/include/linux/msi.h index a2a0068a8387..8b425c66305a 100644 --- a/include/linux/msi.h +++ b/include/linux/msi.h @@ -32,6 +32,14 @@ struct platform_msi_desc { u16 msi_index; }; +/** + * fsl_mc_msi_desc - FSL-MC device specific msi descriptor data + * @msi_index: The index of the MSI descriptor + */ +struct fsl_mc_msi_desc { + u16 msi_index; +}; + /** * struct msi_desc - Descriptor structure for MSI based interrupts * @list: List head for management @@ -87,6 +95,7 @@ struct msi_desc { * tree wide cleanup. */ struct platform_msi_desc platform; + struct fsl_mc_msi_desc fsl_mc; }; }; -- cgit v1.2.3 From 0118de7b4c04cba1b275d889ad14a39950f30021 Mon Sep 17 00:00:00 2001 From: Daniel Baluta Date: Mon, 8 Feb 2016 17:03:15 +0200 Subject: iio: Fix documentation for iio_dev mlock mlock *must* be used by core and drivers to protect access to devices state changes. Signed-off-by: Daniel Baluta Signed-off-by: Jonathan Cameron --- include/linux/iio/iio.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index b5894118755f..ce9e9c1adf34 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -448,7 +448,7 @@ struct iio_buffer_setup_ops { * @buffer: [DRIVER] any buffer present * @buffer_list: [INTERN] list of all buffers currently attached * @scan_bytes: [INTERN] num bytes captured to be fed to buffer demux - * @mlock: [INTERN] lock used to prevent simultaneous device state + * @mlock: [DRIVER] lock used to prevent simultaneous device state * changes * @available_scan_masks: [DRIVER] optional array of allowed bitmasks * @masklength: [INTERN] the length of the mask established from -- cgit v1.2.3 From 3347a0656e7a83b959b1d0ad5396fb4f9c9b2a0e Mon Sep 17 00:00:00 2001 From: William Breathitt Gray Date: Mon, 15 Feb 2016 12:47:42 -0500 Subject: iio: Fix typos in the struct iio_event_spec documentation comments This patch fixes a few minor typos in the documentation comments for the scan_type member of the iio_event_spec structure. The sign member name was improperly capitalized as "Sign" in the comments. The storagebits member name was improperly listed as "storage_bits" in the comments. The endianness member entry in the comments was moved after the repeat member entry in order to maintain consistency with the actual struct iio_event_spec layout. Signed-off-by: William Breathitt Gray Signed-off-by: Jonathan Cameron --- include/linux/iio/iio.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index ce9e9c1adf34..b2b16772c651 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -180,18 +180,18 @@ struct iio_event_spec { * @address: Driver specific identifier. * @scan_index: Monotonic index to give ordering in scans when read * from a buffer. - * @scan_type: Sign: 's' or 'u' to specify signed or unsigned + * @scan_type: sign: 's' or 'u' to specify signed or unsigned * realbits: Number of valid bits of data - * storage_bits: Realbits + padding + * storagebits: Realbits + padding * shift: Shift right by this before masking out * realbits. - * endianness: little or big endian * repeat: Number of times real/storage bits * repeats. When the repeat element is * more than 1, then the type element in * sysfs will show a repeat value. * Otherwise, the number of repetitions is * omitted. + * endianness: little or big endian * @info_mask_separate: What information is to be exported that is specific to * this channel. * @info_mask_shared_by_type: What information is to be exported that is shared -- cgit v1.2.3 From cb77659272af51e80099c93b0e65abbf43bdaad5 Mon Sep 17 00:00:00 2001 From: Dmitry Eremin Date: Sun, 14 Feb 2016 19:13:52 -0500 Subject: staging/lustre: proper support of NFS anonymous dentries NFS can ask to encode dentries that are not connected to the root. The fix check for parent is NULL and encode a file handle accordingly. Reviewed-on: http://review.whamcloud.com/8347 Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4231 Reviewed-by: Fan Yong Reviewed-by: James Simmons Reviewed-by: Jian Yu Signed-off-by: Dmitry Eremin Signed-off-by: Oleg Drokin Acked-by: Jeff Layton Signed-off-by: Greg Kroah-Hartman --- include/linux/exportfs.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/exportfs.h b/include/linux/exportfs.h index fa05e04c5531..d8414502edb4 100644 --- a/include/linux/exportfs.h +++ b/include/linux/exportfs.h @@ -96,6 +96,12 @@ enum fid_type { */ FILEID_FAT_WITH_PARENT = 0x72, + /* + * 128 bit child FID (struct lu_fid) + * 128 bit parent FID (struct lu_fid) + */ + FILEID_LUSTRE = 0x97, + /* * Filesystems must not use 0xff file ID. */ -- cgit v1.2.3