From 3de56099591a4042556a2d05d4703387ad950c6f Mon Sep 17 00:00:00 2001 From: Russ Dill Date: Fri, 24 Jun 2016 13:58:07 +0530 Subject: regulator: tps65217: Enable suspend configuration The TPS65217 has a pre-defined power-up / power-down sequence which in a typical application does not need to be changed. However, it is possible to define custom sequences under I2C control. The power-up sequence is defined by strobes and delay times. Each output rail is assigned to a strobe to determine the order in which the rails are enabled. Every regulator of tps65217 PMIC has sequence registers and every regulator has a default strobe value and gets disabled when a particular power down sequence occurs. To keep a regulator on during suspend we write value 0 to strobe so that the regulator is out of all sequencers and is not impacted by any power down sequence. Hence saving the default strobe value during probe so that when we want to regulator to be enabled during suspend we write 0 to strobe and when we want it to get disabled during suspend we write the default saved strobe value. This allows platform data to specify which power rails should be on or off during RTC only suspend. This is necessary to keep DDR state while in RTC only suspend. Signed-off-by: Russ Dill [Enhanced commit log and added dynamic allocation for strobes] Signed-off-by: Keerthy Signed-off-by: Mark Brown --- include/linux/mfd/tps65217.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mfd/tps65217.h b/include/linux/mfd/tps65217.h index ac7fba44d7e4..1c88231496d3 100644 --- a/include/linux/mfd/tps65217.h +++ b/include/linux/mfd/tps65217.h @@ -257,6 +257,7 @@ struct tps65217 { unsigned long id; struct regulator_desc desc[TPS65217_NUM_REGULATOR]; struct regmap *regmap; + u8 *strobes; }; static inline struct tps65217 *dev_to_tps65217(struct device *dev) -- cgit v1.2.3 From b9a0d359413d7f4e078d81cd59f9d851a6febb7a Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Fri, 24 Jun 2016 13:58:08 +0530 Subject: regulator: tps65218: Enable suspend configuration TPS65218 has a pre-defined power-up / power-down sequence which in a typical application does not need to be changed. However, it is possible to define custom sequences under I2C control. The power-up sequence is defined by strobes and delay times. Each output rail is assigned to a strobe to determine the order in which the rails are enabled. Every regulator has sequence registers and every regulator has a default strobe value and gets disabled when a particular power down sequence occurs. To keep a regulator on during suspend we write value 0 to strobe so that the regulator is out of all sequencers and is not impacted by any power down sequence. Hence saving the default strobe value during probe so that when we want to regulator to be enabled during suspend we write 0 to strobe and when we want it to get disabled during suspend we write the default saved strobe value. This allows platform data to specify which power rails should be on or off during RTC only suspend. This is necessary to keep DDR state while in RTC only suspend. Signed-off-by: Tero Kristo Signed-off-by: Keerthy Signed-off-by: Mark Brown --- include/linux/mfd/tps65218.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/tps65218.h b/include/linux/mfd/tps65218.h index d58f3b5f585a..7fdf5326f34e 100644 --- a/include/linux/mfd/tps65218.h +++ b/include/linux/mfd/tps65218.h @@ -246,6 +246,7 @@ enum tps65218_irqs { * @name: Voltage regulator name * @min_uV: minimum micro volts * @max_uV: minimum micro volts + * @strobe: sequencing strobe value for the regulator * * This data is used to check the regualtor voltage limits while setting. */ @@ -254,6 +255,7 @@ struct tps_info { const char *name; int min_uV; int max_uV; + int strobe; }; /** -- cgit v1.2.3 From a99ab50dbbb1f982d076d19e0a9959fe2efa3126 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Tue, 28 Jun 2016 22:53:19 -0700 Subject: mfd: rn5t618: Add Ricoh RN5T567 PMIC support The Ricoh RN5T567 is from the same family as the Ricoh RN5T618 is, the differences are: + DCDC4 + Slightly different output voltage/currents + 32kHz Output - ADC/Charger capabilities Signed-off-by: Stefan Agner Reviewed-by: Marcel Ziswiler Acked-by: Rob Herring Signed-off-by: Lee Jones --- include/linux/mfd/rn5t618.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/rn5t618.h b/include/linux/mfd/rn5t618.h index c72d5344f3b3..54179c2577ae 100644 --- a/include/linux/mfd/rn5t618.h +++ b/include/linux/mfd/rn5t618.h @@ -20,6 +20,7 @@ #define RN5T618_OTPVER 0x01 #define RN5T618_IODAC 0x02 #define RN5T618_VINDAC 0x03 +#define RN5T618_OUT32KEN 0x05 #define RN5T618_CPUCNT 0x06 #define RN5T618_PSWR 0x07 #define RN5T618_PONHIS 0x09 @@ -38,6 +39,7 @@ #define RN5T618_DC1_SLOT 0x16 #define RN5T618_DC2_SLOT 0x17 #define RN5T618_DC3_SLOT 0x18 +#define RN5T618_DC4_SLOT 0x19 #define RN5T618_LDO1_SLOT 0x1b #define RN5T618_LDO2_SLOT 0x1c #define RN5T618_LDO3_SLOT 0x1d @@ -54,12 +56,16 @@ #define RN5T618_DC2CTL2 0x2f #define RN5T618_DC3CTL 0x30 #define RN5T618_DC3CTL2 0x31 +#define RN5T618_DC4CTL 0x32 +#define RN5T618_DC4CTL2 0x33 #define RN5T618_DC1DAC 0x36 #define RN5T618_DC2DAC 0x37 #define RN5T618_DC3DAC 0x38 +#define RN5T618_DC4DAC 0x39 #define RN5T618_DC1DAC_SLP 0x3b #define RN5T618_DC2DAC_SLP 0x3c #define RN5T618_DC3DAC_SLP 0x3d +#define RN5T618_DC4DAC_SLP 0x3e #define RN5T618_DCIREN 0x40 #define RN5T618_DCIRQ 0x41 #define RN5T618_DCIRMON 0x42 @@ -221,8 +227,14 @@ enum { RN5T618_REG_NUM, }; +enum { + RN5T567 = 0, + RN5T618, +}; + struct rn5t618 { struct regmap *regmap; + long variant; }; #endif /* __LINUX_MFD_RN5T618_H */ -- cgit v1.2.3 From ed6d362d8dbc3494cd98cd771737ea8b1407ed61 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Tue, 28 Jun 2016 22:53:20 -0700 Subject: regulator: rn5t618: Add RN5T567 PMIC support Extend the driver to support Ricoh RN5T567. Support the additional DCDC and slightly different voltage range of LDORTC1. Signed-off-by: Stefan Agner Reviewed-by: Marcel Ziswiler Acked-by: Mark Brown Signed-off-by: Lee Jones --- include/linux/mfd/rn5t618.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mfd/rn5t618.h b/include/linux/mfd/rn5t618.h index 54179c2577ae..cadc6543909d 100644 --- a/include/linux/mfd/rn5t618.h +++ b/include/linux/mfd/rn5t618.h @@ -217,6 +217,7 @@ enum { RN5T618_DCDC1, RN5T618_DCDC2, RN5T618_DCDC3, + RN5T618_DCDC4, RN5T618_LDO1, RN5T618_LDO2, RN5T618_LDO3, -- cgit v1.2.3