From bafbdd527d569c8200521f2f7579f65a044271be Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Mon, 4 Dec 2017 13:35:05 +0100 Subject: phylib: Add device reset GPIO support The PHY devices sometimes do have their reset signal (maybe even power supply?) tied to some GPIO and sometimes it also does happen that a boot loader does not leave it deasserted. So far this issue has been attacked from (as I believe) a wrong angle: by teaching the MAC driver to manipulate the GPIO in question; that solution, when applied to the device trees, led to adding the PHY reset GPIO properties to the MAC device node, with one exception: Cadence MACB driver which could handle the "reset-gpios" prop in a PHY device subnode. I believe that the correct approach is to teach the 'phylib' to get the MDIO device reset GPIO from the device tree node corresponding to this device -- which this patch is doing... Note that I had to modify the AT803x PHY driver as it would stop working otherwise -- it made use of the reset GPIO for its own purposes... Signed-off-by: Sergei Shtylyov Acked-by: Rob Herring [geert: Propagate actual errors from fwnode_get_named_gpiod()] [geert: Avoid destroying initial setup] [geert: Consolidate GPIO descriptor acquiring code] Signed-off-by: Geert Uytterhoeven Tested-by: Richard Leitner Signed-off-by: David S. Miller --- include/linux/mdio.h | 3 +++ include/linux/phy.h | 5 +++++ 2 files changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mdio.h b/include/linux/mdio.h index ca08ab16ecdc..92d4e55ffe67 100644 --- a/include/linux/mdio.h +++ b/include/linux/mdio.h @@ -12,6 +12,7 @@ #include #include +struct gpio_desc; struct mii_bus; /* Multiple levels of nesting are possible. However typically this is @@ -39,6 +40,7 @@ struct mdio_device { /* Bus address of the MDIO device (0-31) */ int addr; int flags; + struct gpio_desc *reset; }; #define to_mdio_device(d) container_of(d, struct mdio_device, dev) @@ -71,6 +73,7 @@ void mdio_device_free(struct mdio_device *mdiodev); struct mdio_device *mdio_device_create(struct mii_bus *bus, int addr); int mdio_device_register(struct mdio_device *mdiodev); void mdio_device_remove(struct mdio_device *mdiodev); +void mdio_device_reset(struct mdio_device *mdiodev, int value); int mdio_driver_register(struct mdio_driver *drv); void mdio_driver_unregister(struct mdio_driver *drv); int mdio_device_bus_match(struct device *dev, struct device_driver *drv); diff --git a/include/linux/phy.h b/include/linux/phy.h index 7570cb838410..d3037e2ffbc4 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -854,6 +854,11 @@ int phy_aneg_done(struct phy_device *phydev); int phy_stop_interrupts(struct phy_device *phydev); int phy_restart_aneg(struct phy_device *phydev); +static inline void phy_device_reset(struct phy_device *phydev, int value) +{ + mdio_device_reset(&phydev->mdio, value); +} + #define phydev_err(_phydev, format, args...) \ dev_err(&_phydev->mdio.dev, format, ##args) -- cgit v1.2.3