From 49920bc66984a512f4bcc7735a61642cd0e4d6f2 Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Thu, 13 Oct 2011 15:15:27 +0530 Subject: dmaengine: add new enum dma_transfer_direction This new enum removes usage of dma_data_direction for dma direction. The new enum cleans tells the DMA direction and mode This further paves way for merging the dmaengine _prep operations and also for interleaved dma Suggested-by: Jassi Brar Reviewed-by: Barry Song Signed-off-by: Vinod Koul --- include/linux/dmaengine.h | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index ace51af4369f..d946ef7f5e67 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -23,7 +23,6 @@ #include #include -#include #include /** @@ -75,6 +74,19 @@ enum dma_transaction_type { /* last transaction type for creation of the capabilities mask */ #define DMA_TX_TYPE_END (DMA_CYCLIC + 1) +/** + * enum dma_transfer_direction - dma transfer mode and direction indicator + * @DMA_MEM_TO_MEM: Async/Memcpy mode + * @DMA_MEM_TO_DEV: Slave mode & From Memory to Device + * @DMA_DEV_TO_MEM: Slave mode & From Device to Memory + * @DMA_DEV_TO_DEV: Slave mode & From Device to Device + */ +enum dma_transfer_direction { + DMA_MEM_TO_MEM, + DMA_MEM_TO_DEV, + DMA_DEV_TO_MEM, + DMA_DEV_TO_DEV, +}; /** * enum dma_ctrl_flags - DMA flags to augment operation preparation, @@ -267,7 +279,7 @@ enum dma_slave_buswidth { * struct, if applicable. */ struct dma_slave_config { - enum dma_data_direction direction; + enum dma_transfer_direction direction; dma_addr_t src_addr; dma_addr_t dst_addr; enum dma_slave_buswidth src_addr_width; @@ -490,11 +502,11 @@ struct dma_device { struct dma_async_tx_descriptor *(*device_prep_slave_sg)( struct dma_chan *chan, struct scatterlist *sgl, - unsigned int sg_len, enum dma_data_direction direction, + unsigned int sg_len, enum dma_transfer_direction direction, unsigned long flags); struct dma_async_tx_descriptor *(*device_prep_dma_cyclic)( struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len, - size_t period_len, enum dma_data_direction direction); + size_t period_len, enum dma_transfer_direction direction); int (*device_control)(struct dma_chan *chan, enum dma_ctrl_cmd cmd, unsigned long arg); @@ -520,7 +532,7 @@ static inline int dmaengine_slave_config(struct dma_chan *chan, static inline struct dma_async_tx_descriptor *dmaengine_prep_slave_single( struct dma_chan *chan, void *buf, size_t len, - enum dma_data_direction dir, unsigned long flags) + enum dma_transfer_direction dir, unsigned long flags) { struct scatterlist sg; sg_init_one(&sg, buf, len); -- cgit v1.2.3 From db8196df4bb6f117caa163aa73b0f16fd62290bd Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Thu, 13 Oct 2011 22:34:23 +0530 Subject: dmaengine: move drivers to dma_transfer_direction fixup usage of dma direction by introducing dma_transfer_direction, this patch moves dma/drivers/* to use new enum Cc: Jassi Brar Cc: Russell King Cc: Viresh Kumar Cc: Linus Walleij Cc: Nicolas Ferre Cc: Mika Westerberg Cc: H Hartley Sweeten Cc: Li Yang Cc: Zhang Wei Cc: Sascha Hauer Cc: Guennadi Liakhovetski Cc: Shawn Guo Cc: Yong Wang Cc: Tomoya MORINAGA Cc: Boojin Kim Cc: Barry Song Acked-by: Mika Westerberg Acked-by: Linus Walleij Acked-by: Viresh Kumar Acked-by: Nicolas Ferre Signed-off-by: Vinod Koul --- include/linux/amba/pl08x.h | 4 ++-- include/linux/dw_dmac.h | 2 +- include/linux/sh_dma.h | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index 9eabffbc4e50..033f6aa670de 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -134,7 +134,7 @@ struct pl08x_txd { struct dma_async_tx_descriptor tx; struct list_head node; struct list_head dsg_list; - enum dma_data_direction direction; + enum dma_transfer_direction direction; dma_addr_t llis_bus; struct pl08x_lli *llis_va; /* Default cctl value for LLIs */ @@ -197,7 +197,7 @@ struct pl08x_dma_chan { dma_addr_t dst_addr; u32 src_cctl; u32 dst_cctl; - enum dma_data_direction runtime_direction; + enum dma_transfer_direction runtime_direction; dma_cookie_t lc; struct list_head pend_list; struct pl08x_txd *at; diff --git a/include/linux/dw_dmac.h b/include/linux/dw_dmac.h index 4bfe0a2f7d50..f2c64f92c4a0 100644 --- a/include/linux/dw_dmac.h +++ b/include/linux/dw_dmac.h @@ -127,7 +127,7 @@ struct dw_cyclic_desc { struct dw_cyclic_desc *dw_dma_cyclic_prep(struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len, size_t period_len, - enum dma_data_direction direction); + enum dma_transfer_direction direction); void dw_dma_cyclic_free(struct dma_chan *chan); int dw_dma_cyclic_start(struct dma_chan *chan); void dw_dma_cyclic_stop(struct dma_chan *chan); diff --git a/include/linux/sh_dma.h b/include/linux/sh_dma.h index cb2dd118cc0f..62ef6938da10 100644 --- a/include/linux/sh_dma.h +++ b/include/linux/sh_dma.h @@ -30,7 +30,7 @@ struct sh_desc { struct sh_dmae_regs hw; struct list_head node; struct dma_async_tx_descriptor async_tx; - enum dma_data_direction direction; + enum dma_transfer_direction direction; dma_cookie_t cookie; size_t partial; int chunks; -- cgit v1.2.3 From b60503ba432b16fc84442a84e29a7aad2c0c363d Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Thu, 20 Jan 2011 12:50:14 -0500 Subject: NVMe: New driver This driver is for devices that follow the NVM Express standard Signed-off-by: Matthew Wilcox --- include/linux/nvme.h | 343 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 343 insertions(+) create mode 100644 include/linux/nvme.h (limited to 'include/linux') diff --git a/include/linux/nvme.h b/include/linux/nvme.h new file mode 100644 index 000000000000..9ba53584f722 --- /dev/null +++ b/include/linux/nvme.h @@ -0,0 +1,343 @@ +/* + * Definitions for the NVM Express interface + * Copyright (c) 2011, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef _LINUX_NVME_H +#define _LINUX_NVME_H + +#include + +struct nvme_bar { + __u64 cap; /* Controller Capabilities */ + __u32 vs; /* Version */ + __u32 ims; /* Interrupt Mask Set */ + __u32 imc; /* Interrupt Mask Clear */ + __u32 cc; /* Controller Configuration */ + __u32 csts; /* Controller Status */ + __u32 aqa; /* Admin Queue Attributes */ + __u64 asq; /* Admin SQ Base Address */ + __u64 acq; /* Admin CQ Base Address */ +}; + +enum { + NVME_CC_ENABLE = 1 << 0, + NVME_CC_CSS_NVM = 0 << 4, + NVME_CC_MPS_SHIFT = 7, + NVME_CC_ARB_RR = 0 << 11, + NVME_CC_ARB_WRRU = 1 << 11, + NVME_CC_ARB_VS = 3 << 11, + NVME_CC_SHN_NONE = 0 << 13, + NVME_CC_SHN_NORMAL = 1 << 13, + NVME_CC_SHN_ABRUPT = 2 << 13, + NVME_CSTS_RDY = 1 << 0, + NVME_CSTS_CFS = 1 << 1, + NVME_CSTS_SHST_NORMAL = 0 << 2, + NVME_CSTS_SHST_OCCUR = 1 << 2, + NVME_CSTS_SHST_CMPLT = 2 << 2, +}; + +#define NVME_VS(major, minor) (major << 16 | minor) + +struct nvme_id_ctrl { + __le16 vid; + __le16 ssvid; + char sn[20]; + char mn[40]; + char fr[8]; + __le32 nn; + __u8 rab; + __u8 rsvd77[178]; + __le16 oacs; + __u8 acl; + __u8 aerl; + __u8 frmw; + __u8 lpa; + __u8 elpe; + __u8 npss; + __u8 rsvd264[248]; + __le64 psd[32]; + __le16 oncs; + __le16 fuses; + __u8 fna; + __u8 vwc; + __le16 awun; + __le16 awupf; + __u8 rsvd778[246]; + __u8 cmdset[2048]; + __u8 vs[1024]; +}; + +struct nvme_lbaf { + __le16 ms; + __u8 ds; + __u8 rp; +}; + +struct nvme_id_ns { + __le64 nsze; + __le64 ncap; + __le64 nuse; + __u8 nsfeat; + __u8 nlbaf; + __u8 flbas; + __u8 mc; + __u8 dpc; + __u8 dps; + __u8 rsvd30[98]; + struct nvme_lbaf lbaf[16]; + __u8 rsvd192[192]; + __u8 vs[3712]; +}; + +enum { + NVME_NS_FEAT_THIN = 1 << 0, + NVME_LBAF_RP_BEST = 0, + NVME_LBAF_RP_BETTER = 1, + NVME_LBAF_RP_GOOD = 2, + NVME_LBAF_RP_DEGRADED = 3, +}; + +struct nvme_lba_range_type { + __u8 type; + __u8 attributes; + __u8 rsvd2[14]; + __u64 slba; + __u64 nlb; + __u8 guid[16]; + __u8 rsvd48[16]; +}; + +enum { + NVME_LBART_TYPE_FS = 0x01, + NVME_LBART_TYPE_RAID = 0x02, + NVME_LBART_TYPE_CACHE = 0x03, + NVME_LBART_TYPE_SWAP = 0x04, + + NVME_LBART_ATTRIB_TEMP = 1 << 0, + NVME_LBART_ATTRIB_HIDE = 1 << 1, +}; + +/* I/O commands */ + +enum nvme_opcode { + nvme_cmd_flush = 0x00, + nvme_cmd_write = 0x01, + nvme_cmd_read = 0x02, + nvme_cmd_write_uncor = 0x04, + nvme_cmd_compare = 0x05, + nvme_cmd_dsm = 0x09, +}; + +struct nvme_rw_command { + __u8 opcode; + __u8 flags; + __u16 command_id; + __le32 nsid; + __u64 rsvd2; + __le64 metadata; + __le64 prp1; + __le64 prp2; + __le64 slba; + __le16 length; + __le16 control; + __le32 dsmgmt; + __le32 reftag; + __le16 apptag; + __le16 appmask; +}; + +enum { + NVME_RW_LR = 1 << 15, + NVME_RW_FUA = 1 << 14, + NVME_RW_DSM_FREQ_UNSPEC = 0, + NVME_RW_DSM_FREQ_TYPICAL = 1, + NVME_RW_DSM_FREQ_RARE = 2, + NVME_RW_DSM_FREQ_READS = 3, + NVME_RW_DSM_FREQ_WRITES = 4, + NVME_RW_DSM_FREQ_RW = 5, + NVME_RW_DSM_FREQ_ONCE = 6, + NVME_RW_DSM_FREQ_PREFETCH = 7, + NVME_RW_DSM_FREQ_TEMP = 8, + NVME_RW_DSM_LATENCY_NONE = 0 << 4, + NVME_RW_DSM_LATENCY_IDLE = 1 << 4, + NVME_RW_DSM_LATENCY_NORM = 2 << 4, + NVME_RW_DSM_LATENCY_LOW = 3 << 4, + NVME_RW_DSM_SEQ_REQ = 1 << 6, + NVME_RW_DSM_COMPRESSED = 1 << 7, +}; + +/* Admin commands */ + +enum nvme_admin_opcode { + nvme_admin_delete_sq = 0x00, + nvme_admin_create_sq = 0x01, + nvme_admin_get_features = 0x02, + nvme_admin_delete_cq = 0x04, + nvme_admin_create_cq = 0x05, + nvme_admin_identify = 0x06, + nvme_admin_abort_cmd = 0x08, + nvme_admin_set_features = 0x09, + nvme_admin_get_log_page = 0x0a, + nvme_admin_async_event = 0x0c, + nvme_admin_download_fw = 0x0d, + nvme_admin_security_recv = 0x0e, + nvme_admin_format_nvm = 0x10, + nvme_admin_security_send = 0x11, + nvme_admin_activate_fw = 0x14, +}; + +enum { + NVME_QUEUE_PHYS_CONTIG = (1 << 0), + NVME_CQ_IRQ_ENABLED = (1 << 1), + NVME_SQ_PRIO_URGENT = (0 << 1), + NVME_SQ_PRIO_HIGH = (1 << 1), + NVME_SQ_PRIO_MEDIUM = (2 << 1), + NVME_SQ_PRIO_LOW = (3 << 1), + NVME_FEAT_ARBITRATION = 0x01, + NVME_FEAT_POWER_MGMT = 0x02, + NVME_FEAT_LBA_RANGE = 0x03, + NVME_FEAT_TEMP_THRESH = 0x04, + NVME_FEAT_ERR_RECOVERY = 0x05, + NVME_FEAT_VOLATILE_WC = 0x06, + NVME_FEAT_NUM_QUEUES = 0x07, + NVME_FEAT_IRQ_COALESCE = 0x08, + NVME_FEAT_IRQ_CONFIG = 0x09, + NVME_FEAT_WRITE_ATOMIC = 0x0a, + NVME_FEAT_ASYNC_EVENT = 0x0b, + NVME_FEAT_SW_PROGRESS = 0x0c, +}; + +struct nvme_identify { + __u8 opcode; + __u8 flags; + __u16 command_id; + __le32 nsid; + __u64 rsvd2[2]; + __le64 prp1; + __le64 prp2; + __le32 cns; + __u32 rsvd11[5]; +}; + +struct nvme_features { + __u8 opcode; + __u8 flags; + __u16 command_id; + __le32 nsid; + __u64 rsvd2[2]; + __le64 prp1; + __le64 prp2; + __le32 fid; + __le32 dword11; + __u32 rsvd12[4]; +}; + +struct nvme_create_cq { + __u8 opcode; + __u8 flags; + __u16 command_id; + __le32 rsvd1[5]; + __le64 prp1; + __u64 rsvd8; + __le16 cqid; + __le16 qsize; + __le16 cq_flags; + __le16 irq_vector; + __u32 rsvd12[4]; +}; + +struct nvme_create_sq { + __u8 opcode; + __u8 flags; + __u16 command_id; + __le32 rsvd1[5]; + __le64 prp1; + __u64 rsvd8; + __le16 sqid; + __le16 qsize; + __le16 sq_flags; + __le16 cqid; + __le32 rsvd12[4]; +}; + +struct nvme_delete_queue { + __u8 opcode; + __u8 flags; + __u16 command_id; + __u32 rsvd1[9]; + __le16 qid; + __le16 rsvd10; + __le32 rsvd11[5]; +}; + +struct nvme_common_command { + __u8 opcode; + __u8 flags; + __u16 command_id; + __le32 nsid; + __u32 rsvd2[14]; +}; + +struct nvme_command { + union { + struct nvme_common_command common; + struct nvme_rw_command rw; + struct nvme_identify identify; + struct nvme_features features; + struct nvme_create_cq create_cq; + struct nvme_create_sq create_sq; + struct nvme_delete_queue delete_queue; + }; +}; + +/* XXX: Sync with spec */ +enum { + NVME_SC_SUCCESS = 0x0, + NVME_SC_INVALID_OPCODE = 0x1, + NVME_SC_INVALID_FIELD = 0x2, + NVME_SC_CMDID_CONFLICT = 0x3, + NVME_SC_DATA_XFER_ERROR = 0x4, + NVME_SC_POWER_LOSS = 0x5, + NVME_SC_INTERNAL = 0x6, + NVME_SC_ABORT_REQ = 0x7, + NVME_SC_ABORT_QUEUE = 0x8, + NVME_SC_FUSED_FAIL = 0x9, + NVME_SC_FUSED_MISSING = 0xa, + NVME_SC_LBA_RANGE = 0x80, + NVME_SC_CAP_EXCEEDED = 0x81, + NVME_SC_NS_NOT_READY = 0x82, + NVME_SC_CQ_INVALID = 0x100, + NVME_SC_QID_INVALID = 0x101, + NVME_SC_QUEUE_SIZE = 0x102, + NVME_SC_WRITE_FAULT = 0x280, + NVME_SC_READ_ERROR = 0x281, +}; + +struct nvme_completion { + __le32 result; /* Used by admin commands to return data */ + __le32 rsvd; + __le16 sq_head; /* how much of this queue may be reclaimed */ + __le16 sq_id; /* submission queue that generated this entry */ + __u16 command_id; /* of the command which completed */ + __le16 status; /* did the command fail, and if so, why? */ +}; + +#define NVME_IOCTL_IDENTIFY_NS _IOW('N', 0x40, struct nvme_id_ns) +#define NVME_IOCTL_IDENTIFY_CTRL _IOW('N', 0x41, struct nvme_id_ctrl) +#define NVME_IOCTL_GET_RANGE_TYPE _IOW('N', 0x42, struct nvme_lba_range_type) + +#endif /* _LINUX_NVME_H */ -- cgit v1.2.3 From 7b4fe9b1cb4b9a6f4ae23a12ef96d08d96e2a5da Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Wed, 26 Jan 2011 10:01:21 -0500 Subject: NVMe: Make nvme_common_command more featureful Add prp1, prp2 and the metadata prp to the common command, since the fields are generally used this way. Signed-off-by: Matthew Wilcox --- include/linux/nvme.h | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nvme.h b/include/linux/nvme.h index 9ba53584f722..1c0b5ef08959 100644 --- a/include/linux/nvme.h +++ b/include/linux/nvme.h @@ -142,6 +142,18 @@ enum nvme_opcode { nvme_cmd_dsm = 0x09, }; +struct nvme_common_command { + __u8 opcode; + __u8 flags; + __u16 command_id; + __le32 nsid; + __u64 rsvd2; + __le64 metadata; + __le64 prp1; + __le64 prp2; + __u32 rsvd10[6]; +}; + struct nvme_rw_command { __u8 opcode; __u8 flags; @@ -284,14 +296,6 @@ struct nvme_delete_queue { __le32 rsvd11[5]; }; -struct nvme_common_command { - __u8 opcode; - __u8 flags; - __u16 command_id; - __le32 nsid; - __u32 rsvd2[14]; -}; - struct nvme_command { union { struct nvme_common_command common; -- cgit v1.2.3 From a53295b6998f62d961c29e54051c1cf1d738c2b3 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Tue, 1 Feb 2011 16:13:29 -0500 Subject: NVMe: Add NVME_IOCTL_SUBMIT_IO Allow userspace to submit synchronous I/O like the SCSI sg interface does. Signed-off-by: Matthew Wilcox --- include/linux/nvme.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nvme.h b/include/linux/nvme.h index 1c0b5ef08959..0aaecb059d14 100644 --- a/include/linux/nvme.h +++ b/include/linux/nvme.h @@ -340,8 +340,26 @@ struct nvme_completion { __le16 status; /* did the command fail, and if so, why? */ }; +struct nvme_user_io { + __u8 opcode; + __u8 flags; + __u16 control; + __u32 nsid; + __u64 metadata; + __u64 addr; + __u64 slba; + __u16 nblocks; + __u16 block_shift; + __u32 dsmgmt; + __u32 reftag; + __u16 apptag; + __u16 appmask; + __u32 result; +}; + #define NVME_IOCTL_IDENTIFY_NS _IOW('N', 0x40, struct nvme_id_ns) #define NVME_IOCTL_IDENTIFY_CTRL _IOW('N', 0x41, struct nvme_id_ctrl) #define NVME_IOCTL_GET_RANGE_TYPE _IOW('N', 0x42, struct nvme_lba_range_type) +#define NVME_IOCTL_SUBMIT_IO _IOWR('N', 0x43, struct nvme_rw_command) #endif /* _LINUX_NVME_H */ -- cgit v1.2.3 From 7a63e07b9a98b77dd075e06b93c1d8dc871ddad5 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Thu, 3 Feb 2011 09:20:57 -0500 Subject: NVMe: Add remaining status codes Signed-off-by: Matthew Wilcox --- include/linux/nvme.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nvme.h b/include/linux/nvme.h index 0aaecb059d14..dbbdc126401b 100644 --- a/include/linux/nvme.h +++ b/include/linux/nvme.h @@ -321,14 +321,29 @@ enum { NVME_SC_ABORT_QUEUE = 0x8, NVME_SC_FUSED_FAIL = 0x9, NVME_SC_FUSED_MISSING = 0xa, + NVME_SC_INVALID_NS = 0xb, NVME_SC_LBA_RANGE = 0x80, NVME_SC_CAP_EXCEEDED = 0x81, NVME_SC_NS_NOT_READY = 0x82, NVME_SC_CQ_INVALID = 0x100, NVME_SC_QID_INVALID = 0x101, NVME_SC_QUEUE_SIZE = 0x102, + NVME_SC_ABORT_LIMIT = 0x103, + NVME_SC_ABORT_MISSING = 0x104, + NVME_SC_ASYNC_LIMIT = 0x105, + NVME_SC_FIRMWARE_SLOT = 0x106, + NVME_SC_FIRMWARE_IMAGE = 0x107, + NVME_SC_INVALID_VECTOR = 0x108, + NVME_SC_INVALID_LOG_PAGE = 0x109, + NVME_SC_INVALID_FORMAT = 0x10a, + NVME_SC_BAD_ATTRIBUTES = 0x180, NVME_SC_WRITE_FAULT = 0x280, NVME_SC_READ_ERROR = 0x281, + NVME_SC_GUARD_CHECK = 0x282, + NVME_SC_APPTAG_CHECK = 0x283, + NVME_SC_REFTAG_CHECK = 0x284, + NVME_SC_COMPARE_FAILED = 0x285, + NVME_SC_ACCESS_DENIED = 0x286, }; struct nvme_completion { -- cgit v1.2.3 From 6ee44cdced04a53dc4f27eb97067e6cd33784726 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Thu, 3 Feb 2011 10:58:26 -0500 Subject: NVMe: Add download / activate firmware ioctls Signed-off-by: Matthew Wilcox --- include/linux/nvme.h | 33 +++++++++++++++++++++++++++------ 1 file changed, 27 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nvme.h b/include/linux/nvme.h index dbbdc126401b..8eed0e432eef 100644 --- a/include/linux/nvme.h +++ b/include/linux/nvme.h @@ -262,7 +262,7 @@ struct nvme_create_cq { __u8 opcode; __u8 flags; __u16 command_id; - __le32 rsvd1[5]; + __u32 rsvd1[5]; __le64 prp1; __u64 rsvd8; __le16 cqid; @@ -276,14 +276,14 @@ struct nvme_create_sq { __u8 opcode; __u8 flags; __u16 command_id; - __le32 rsvd1[5]; + __u32 rsvd1[5]; __le64 prp1; __u64 rsvd8; __le16 sqid; __le16 qsize; __le16 sq_flags; __le16 cqid; - __le32 rsvd12[4]; + __u32 rsvd12[4]; }; struct nvme_delete_queue { @@ -292,8 +292,20 @@ struct nvme_delete_queue { __u16 command_id; __u32 rsvd1[9]; __le16 qid; - __le16 rsvd10; - __le32 rsvd11[5]; + __u16 rsvd10; + __u32 rsvd11[5]; +}; + +struct nvme_download_firmware { + __u8 opcode; + __u8 flags; + __u16 command_id; + __u32 rsvd1[5]; + __le64 prp1; + __le64 prp2; + __le32 numd; + __le32 offset; + __u32 rsvd12[4]; }; struct nvme_command { @@ -305,6 +317,7 @@ struct nvme_command { struct nvme_create_cq create_cq; struct nvme_create_sq create_sq; struct nvme_delete_queue delete_queue; + struct nvme_download_firmware dlfw; }; }; @@ -348,7 +361,7 @@ enum { struct nvme_completion { __le32 result; /* Used by admin commands to return data */ - __le32 rsvd; + __u32 rsvd; __le16 sq_head; /* how much of this queue may be reclaimed */ __le16 sq_id; /* submission queue that generated this entry */ __u16 command_id; /* of the command which completed */ @@ -372,9 +385,17 @@ struct nvme_user_io { __u32 result; }; +struct nvme_dlfw { + __u64 addr; + __u32 length; /* In dwords */ + __u32 offset; /* In dwords */ +}; + #define NVME_IOCTL_IDENTIFY_NS _IOW('N', 0x40, struct nvme_id_ns) #define NVME_IOCTL_IDENTIFY_CTRL _IOW('N', 0x41, struct nvme_id_ctrl) #define NVME_IOCTL_GET_RANGE_TYPE _IOW('N', 0x42, struct nvme_lba_range_type) #define NVME_IOCTL_SUBMIT_IO _IOWR('N', 0x43, struct nvme_rw_command) +#define NVME_IOCTL_DOWNLOAD_FW _IOR('N', 0x44, struct nvme_dlfw) +#define NVME_IOCTL_ACTIVATE_FW _IO('N', 0x45) #endif /* _LINUX_NVME_H */ -- cgit v1.2.3 From 897cfe1ce7db152fa6dde576f4213a6160bf6502 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Mon, 14 Feb 2011 12:20:15 -0500 Subject: NVMe: Update BAR structure to match the current spec Add two reserved registers in the middle of the BAR to match the 1.0 spec plus ECN 0002. Also rename IMC and ISC to INTMC and INTSC to conform with the spec. We still don't need to use them :-) Signed-off-by: Matthew Wilcox --- include/linux/nvme.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nvme.h b/include/linux/nvme.h index 8eed0e432eef..757faa71666e 100644 --- a/include/linux/nvme.h +++ b/include/linux/nvme.h @@ -24,10 +24,12 @@ struct nvme_bar { __u64 cap; /* Controller Capabilities */ __u32 vs; /* Version */ - __u32 ims; /* Interrupt Mask Set */ - __u32 imc; /* Interrupt Mask Clear */ + __u32 intms; /* Interrupt Mask Set */ + __u32 intmc; /* Interrupt Mask Clear */ __u32 cc; /* Controller Configuration */ + __u32 rsvd1; /* Reserved */ __u32 csts; /* Controller Status */ + __u32 rsvd2; /* Reserved */ __u32 aqa; /* Admin Queue Attributes */ __u64 asq; /* Admin SQ Base Address */ __u64 acq; /* Admin CQ Base Address */ -- cgit v1.2.3 From 2ddc4f74d8adcf3e1cdec7f3e72d19b5c878597c Mon Sep 17 00:00:00 2001 From: Krzysztof Wierzbicki Date: Mon, 28 Feb 2011 08:27:13 +0100 Subject: NVMe: Update admin opcodes to match the 1.0RC spec Signed-off-by: Krzysztof Wierzbicki Signed-off-by: Matthew Wilcox Signed-off-by: Matthew Wilcox --- include/linux/nvme.h | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nvme.h b/include/linux/nvme.h index 757faa71666e..c46a9b7988fb 100644 --- a/include/linux/nvme.h +++ b/include/linux/nvme.h @@ -199,19 +199,19 @@ enum { enum nvme_admin_opcode { nvme_admin_delete_sq = 0x00, nvme_admin_create_sq = 0x01, - nvme_admin_get_features = 0x02, + nvme_admin_get_log_page = 0x02, nvme_admin_delete_cq = 0x04, nvme_admin_create_cq = 0x05, nvme_admin_identify = 0x06, nvme_admin_abort_cmd = 0x08, nvme_admin_set_features = 0x09, - nvme_admin_get_log_page = 0x0a, + nvme_admin_get_features = 0x0a, nvme_admin_async_event = 0x0c, - nvme_admin_download_fw = 0x0d, - nvme_admin_security_recv = 0x0e, - nvme_admin_format_nvm = 0x10, - nvme_admin_security_send = 0x11, - nvme_admin_activate_fw = 0x14, + nvme_admin_activate_fw = 0x10, + nvme_admin_download_fw = 0x11, + nvme_admin_format_nvm = 0x80, + nvme_admin_security_send = 0x81, + nvme_admin_security_recv = 0x82, }; enum { -- cgit v1.2.3 From 19e899b2f9f89f4a290dd5c9c24d15987a18ab21 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Wed, 16 Mar 2011 16:29:24 -0400 Subject: NVMe: Remove outdated comments The head can never overrun the tail since we won't allocate enough command IDs to let that happen. The status codes are in sync with the spec. Signed-off-by: Matthew Wilcox --- include/linux/nvme.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/nvme.h b/include/linux/nvme.h index c46a9b7988fb..6b5a8d19daf5 100644 --- a/include/linux/nvme.h +++ b/include/linux/nvme.h @@ -323,7 +323,6 @@ struct nvme_command { }; }; -/* XXX: Sync with spec */ enum { NVME_SC_SUCCESS = 0x0, NVME_SC_INVALID_OPCODE = 0x1, -- cgit v1.2.3 From 9d4af1b7796ba02b73a79a8694399e5a3cd1c55d Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Sun, 20 Mar 2011 07:27:10 -0400 Subject: NVMe: Correct the definitions of two ioctls NVME_IOCTL_SUBMIT_IO has a struct nvme_user_io, not a struct nvme_rw_command as a parameter, and NVME_IOCTL_DOWNLOAD_FW is a Write, not a Read. Reported-by: Arnd Bergmann Signed-off-by: Matthew Wilcox --- include/linux/nvme.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nvme.h b/include/linux/nvme.h index 6b5a8d19daf5..fd10d597cca7 100644 --- a/include/linux/nvme.h +++ b/include/linux/nvme.h @@ -395,8 +395,8 @@ struct nvme_dlfw { #define NVME_IOCTL_IDENTIFY_NS _IOW('N', 0x40, struct nvme_id_ns) #define NVME_IOCTL_IDENTIFY_CTRL _IOW('N', 0x41, struct nvme_id_ctrl) #define NVME_IOCTL_GET_RANGE_TYPE _IOW('N', 0x42, struct nvme_lba_range_type) -#define NVME_IOCTL_SUBMIT_IO _IOWR('N', 0x43, struct nvme_rw_command) -#define NVME_IOCTL_DOWNLOAD_FW _IOR('N', 0x44, struct nvme_dlfw) +#define NVME_IOCTL_SUBMIT_IO _IOWR('N', 0x43, struct nvme_user_io) +#define NVME_IOCTL_DOWNLOAD_FW _IOW('N', 0x44, struct nvme_dlfw) #define NVME_IOCTL_ACTIVATE_FW _IO('N', 0x45) #endif /* _LINUX_NVME_H */ -- cgit v1.2.3 From 6c7d49455ceb63064f992347d9185ff5bf43497a Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Mon, 21 Mar 2011 09:48:57 -0400 Subject: NVMe: Change the definition of nvme_user_io The read and write commands don't define a 'result', so there's no need to copy it back to userspace. Remove the ability of the ioctl to submit commands to a different namespace; it's just asking for trouble, and the use case I have in mind will be addressed througha different ioctl in the future. That removes the need for both the block_shift and nsid arguments. Check that the opcode is one of 'read' or 'write'. Future opcodes may be added in the future, but we will need a different structure definition for them. The nblocks field is redefined to be 0-based. This allows the user to request the full 65536 blocks. Don't byteswap the reftag, apptag and appmask. Martin Petersen tells me these are calculated in big-endian and are transmitted to the device in big-endian. Signed-off-by: Matthew Wilcox --- include/linux/nvme.h | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nvme.h b/include/linux/nvme.h index fd10d597cca7..347ad5f9a721 100644 --- a/include/linux/nvme.h +++ b/include/linux/nvme.h @@ -373,17 +373,15 @@ struct nvme_user_io { __u8 opcode; __u8 flags; __u16 control; - __u32 nsid; + __u16 nblocks; + __u16 rsvd; __u64 metadata; __u64 addr; __u64 slba; - __u16 nblocks; - __u16 block_shift; __u32 dsmgmt; __u32 reftag; __u16 apptag; __u16 appmask; - __u32 result; }; struct nvme_dlfw { @@ -395,7 +393,7 @@ struct nvme_dlfw { #define NVME_IOCTL_IDENTIFY_NS _IOW('N', 0x40, struct nvme_id_ns) #define NVME_IOCTL_IDENTIFY_CTRL _IOW('N', 0x41, struct nvme_id_ctrl) #define NVME_IOCTL_GET_RANGE_TYPE _IOW('N', 0x42, struct nvme_lba_range_type) -#define NVME_IOCTL_SUBMIT_IO _IOWR('N', 0x43, struct nvme_user_io) +#define NVME_IOCTL_SUBMIT_IO _IOW('N', 0x43, struct nvme_user_io) #define NVME_IOCTL_DOWNLOAD_FW _IOW('N', 0x44, struct nvme_dlfw) #define NVME_IOCTL_ACTIVATE_FW _IO('N', 0x45) -- cgit v1.2.3 From 7f53f9d2424533256ae86f7df5661a17de743de8 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Tue, 22 Mar 2011 15:55:45 -0400 Subject: NVMe: Correct the Controller Configuration settings The arbitration field was extended by one bit, shifting the shutdown notification bits by one. Also, the SQ/CQ entry size was made configurable for future extensions. Reported-by: Paul Luse Signed-off-by: Matthew Wilcox --- include/linux/nvme.h | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nvme.h b/include/linux/nvme.h index 347ad5f9a721..9d6febb91521 100644 --- a/include/linux/nvme.h +++ b/include/linux/nvme.h @@ -41,10 +41,12 @@ enum { NVME_CC_MPS_SHIFT = 7, NVME_CC_ARB_RR = 0 << 11, NVME_CC_ARB_WRRU = 1 << 11, - NVME_CC_ARB_VS = 3 << 11, - NVME_CC_SHN_NONE = 0 << 13, - NVME_CC_SHN_NORMAL = 1 << 13, - NVME_CC_SHN_ABRUPT = 2 << 13, + NVME_CC_ARB_VS = 7 << 11, + NVME_CC_SHN_NONE = 0 << 14, + NVME_CC_SHN_NORMAL = 1 << 14, + NVME_CC_SHN_ABRUPT = 2 << 14, + NVME_CC_IOSQES = 6 << 16, + NVME_CC_IOCQES = 4 << 20, NVME_CSTS_RDY = 1 << 0, NVME_CSTS_CFS = 1 << 1, NVME_CSTS_SHST_NORMAL = 0 << 2, -- cgit v1.2.3 From 22605f96810d073eb74051d0295b6577d6a6a563 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Tue, 19 Apr 2011 15:04:20 -0400 Subject: NVMe: Time out initialisation after a few seconds THe device reports (in its capability register) how long it will take to initialise. If that time elapses before the ready bit becomes set, conclude the device is broken and refuse to initialise it. Log a nice error message so the user knows why we did nothing. Signed-off-by: Matthew Wilcox --- include/linux/nvme.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nvme.h b/include/linux/nvme.h index 9d6febb91521..a19304fefa7d 100644 --- a/include/linux/nvme.h +++ b/include/linux/nvme.h @@ -35,6 +35,8 @@ struct nvme_bar { __u64 acq; /* Admin CQ Base Address */ }; +#define NVME_CAP_TIMEOUT(cap) (((cap) >> 24) & 0xff) + enum { NVME_CC_ENABLE = 1 << 0, NVME_CC_CSS_NVM = 0 << 4, -- cgit v1.2.3 From 6bbf1acddeed0bfb345a5578f9fcada16f1e514f Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 20 May 2011 13:03:42 -0400 Subject: NVMe: Rework ioctls Remove the special-purpose IDENTIFY, GET_RANGE_TYPE, DOWNLOAD_FIRMWARE and ACTIVATE_FIRMWARE commands. Replace them with a generic ADMIN_CMD ioctl that can submit any admin command. Add a new ID ioctl that returns the namespace ID of the queried device. It corresponds to the SCSI Idlun ioctl. Signed-off-by: Matthew Wilcox --- include/linux/nvme.h | 34 +++++++++++++++++++++++----------- 1 file changed, 23 insertions(+), 11 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nvme.h b/include/linux/nvme.h index a19304fefa7d..c96ab0f5ef6f 100644 --- a/include/linux/nvme.h +++ b/include/linux/nvme.h @@ -153,11 +153,11 @@ struct nvme_common_command { __u8 flags; __u16 command_id; __le32 nsid; - __u64 rsvd2; + __u32 cdw2[2]; __le64 metadata; __le64 prp1; __le64 prp2; - __u32 rsvd10[6]; + __u32 cdw10[6]; }; struct nvme_rw_command { @@ -388,17 +388,29 @@ struct nvme_user_io { __u16 appmask; }; -struct nvme_dlfw { +struct nvme_admin_cmd { + __u8 opcode; + __u8 flags; + __u16 rsvd1; + __u32 nsid; + __u32 cdw2; + __u32 cdw3; + __u64 metadata; __u64 addr; - __u32 length; /* In dwords */ - __u32 offset; /* In dwords */ + __u32 metadata_len; + __u32 data_len; + __u32 cdw10; + __u32 cdw11; + __u32 cdw12; + __u32 cdw13; + __u32 cdw14; + __u32 cdw15; + __u32 timeout_ms; + __u32 result; }; -#define NVME_IOCTL_IDENTIFY_NS _IOW('N', 0x40, struct nvme_id_ns) -#define NVME_IOCTL_IDENTIFY_CTRL _IOW('N', 0x41, struct nvme_id_ctrl) -#define NVME_IOCTL_GET_RANGE_TYPE _IOW('N', 0x42, struct nvme_lba_range_type) -#define NVME_IOCTL_SUBMIT_IO _IOW('N', 0x43, struct nvme_user_io) -#define NVME_IOCTL_DOWNLOAD_FW _IOW('N', 0x44, struct nvme_dlfw) -#define NVME_IOCTL_ACTIVATE_FW _IO('N', 0x45) +#define NVME_IOCTL_ID _IO('N', 0x40) +#define NVME_IOCTL_ADMIN_CMD _IOWR('N', 0x41, struct nvme_admin_cmd) +#define NVME_IOCTL_SUBMIT_IO _IOW('N', 0x42, struct nvme_user_io) #endif /* _LINUX_NVME_H */ -- cgit v1.2.3 From f1938f6e1ee1583c87ec74dc406fdd8694e99ac8 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Thu, 20 Oct 2011 17:00:41 -0400 Subject: NVMe: Implement doorbell stride capability The doorbell stride allows devices to spread out their doorbells instead of packing them tightly. This feature was added as part of ECN 003. This patch also enables support for more than 512 queues :-) Signed-off-by: Matthew Wilcox --- include/linux/nvme.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/nvme.h b/include/linux/nvme.h index c96ab0f5ef6f..2a2c535c8345 100644 --- a/include/linux/nvme.h +++ b/include/linux/nvme.h @@ -36,6 +36,7 @@ struct nvme_bar { }; #define NVME_CAP_TIMEOUT(cap) (((cap) >> 24) & 0xff) +#define NVME_CAP_STRIDE(cap) (((cap) >> 32) & 0xf) enum { NVME_CC_ENABLE = 1 << 0, -- cgit v1.2.3 From 010e646ba2fdfc558048a97da746381c35836280 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 4 Nov 2011 16:24:23 -0400 Subject: NVMe: Update Identify Controller data structure The driver was still using an old definition of Identify Controller which only came to light once we started using the 'number of namespaces' field properly. Reported-by: Nisheeth Bhat Reported-by: Khosrow Panah Signed-off-by: Matthew Wilcox --- include/linux/nvme.h | 27 ++++++++++++++++++++++----- 1 file changed, 22 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nvme.h b/include/linux/nvme.h index 2a2c535c8345..9490a00529f4 100644 --- a/include/linux/nvme.h +++ b/include/linux/nvme.h @@ -57,6 +57,18 @@ enum { NVME_CSTS_SHST_CMPLT = 2 << 2, }; +struct nvme_id_power_state { + __le16 max_power; /* centiwatts */ + __u16 rsvd2; + __le32 entry_lat; /* microseconds */ + __le32 exit_lat; /* microseconds */ + __u8 read_tput; + __u8 read_lat; + __u8 write_tput; + __u8 write_lat; + __u8 rsvd16[16]; +}; + #define NVME_VS(major, minor) (major << 16 | minor) struct nvme_id_ctrl { @@ -65,9 +77,11 @@ struct nvme_id_ctrl { char sn[20]; char mn[40]; char fr[8]; - __le32 nn; __u8 rab; - __u8 rsvd77[178]; + __u8 ieee[3]; + __u8 mic; + __u8 mdts; + __u8 rsvd78[178]; __le16 oacs; __u8 acl; __u8 aerl; @@ -76,15 +90,18 @@ struct nvme_id_ctrl { __u8 elpe; __u8 npss; __u8 rsvd264[248]; - __le64 psd[32]; + __u8 sqes; + __u8 cqes; + __u8 rsvd514[2]; + __le32 nn; __le16 oncs; __le16 fuses; __u8 fna; __u8 vwc; __le16 awun; __le16 awupf; - __u8 rsvd778[246]; - __u8 cmdset[2048]; + __u8 rsvd530[1518]; + struct nvme_id_power_state psd[32]; __u8 vs[1024]; }; -- cgit v1.2.3 From 39ce61a846c8e1fa00cb57ad5af021542e6e8403 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 11 Nov 2011 12:46:23 -0200 Subject: [media] dvb: Allow select between DVB-C Annex A and Annex C DVB-C, as defined by ITU-T J.83 has 3 annexes. The differences between Annex A and Annex C is that Annex C uses a subset of the modulation types, and uses a different rolloff factor. A different rolloff means that the bandwidth required is slicely different, and may affect the saw filter configuration at the tuners. Also, some demods have different configurations, depending on using Annex A or Annex C. So, allow userspace to specify it, by changing the rolloff factor. Signed-off-by: Mauro Carvalho Chehab --- include/linux/dvb/frontend.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h index 1b1094c35e4f..d9251df867b5 100644 --- a/include/linux/dvb/frontend.h +++ b/include/linux/dvb/frontend.h @@ -329,6 +329,8 @@ typedef enum fe_rolloff { ROLLOFF_20, ROLLOFF_25, ROLLOFF_AUTO, + ROLLOFF_15, /* DVB-C Annex A */ + ROLLOFF_13, /* DVB-C Annex C */ } fe_rolloff_t; typedef enum fe_delivery_system { -- cgit v1.2.3 From 5a6b5e02d673486c96003d4a6e3e2510f4c59f92 Mon Sep 17 00:00:00 2001 From: Florian Tobias Schandinat Date: Sat, 3 Sep 2011 01:36:08 +0000 Subject: fbdev: remove display subsystem This four year old subsystem does not have a single in-tree user not even in staging and as far as I know also none out-of-tree. I think that justifies removing it which cleans the config up. Signed-off-by: Florian Tobias Schandinat Acked-by: James Simmons Cc: Andrew Morton --- include/linux/display.h | 61 ------------------------------------------------- 1 file changed, 61 deletions(-) delete mode 100644 include/linux/display.h (limited to 'include/linux') diff --git a/include/linux/display.h b/include/linux/display.h deleted file mode 100644 index 3bf70d639728..000000000000 --- a/include/linux/display.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * Copyright (C) 2006 James Simmons - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - */ - -#ifndef _LINUX_DISPLAY_H -#define _LINUX_DISPLAY_H - -#include - -struct display_device; - -/* This structure defines all the properties of a Display. */ -struct display_driver { - int (*set_contrast)(struct display_device *, unsigned int); - int (*get_contrast)(struct display_device *); - void (*suspend)(struct display_device *, pm_message_t state); - void (*resume)(struct display_device *); - int (*probe)(struct display_device *, void *); - int (*remove)(struct display_device *); - int max_contrast; -}; - -struct display_device { - struct module *owner; /* Owner module */ - struct display_driver *driver; - struct device *parent; /* This is the parent */ - struct device *dev; /* This is this display device */ - struct mutex lock; - void *priv_data; - char type[16]; - char *name; - int idx; -}; - -extern struct display_device *display_device_register(struct display_driver *driver, - struct device *dev, void *devdata); -extern void display_device_unregister(struct display_device *dev); - -extern int probe_edid(struct display_device *dev, void *devdata); - -#define to_display_device(obj) container_of(obj, struct display_device, class_dev) - -#endif -- cgit v1.2.3 From 38eb6863ed21de9beab792f66cd282c21e0dc10b Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 20 Oct 2011 13:42:22 +0200 Subject: zorro: Rename Picasso IV Z2 "MEM" to "RAM" for consistency Signed-off-by: Geert Uytterhoeven Signed-off-by: Florian Tobias Schandinat --- include/linux/zorro_ids.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/zorro_ids.h b/include/linux/zorro_ids.h index 7e749088910d..74bc53bcfdcf 100644 --- a/include/linux/zorro_ids.h +++ b/include/linux/zorro_ids.h @@ -360,8 +360,8 @@ #define ZORRO_PROD_VILLAGE_TRONIC_PICASSO_II_II_PLUS_RAM ZORRO_ID(VILLAGE_TRONIC, 0x0B, 0) #define ZORRO_PROD_VILLAGE_TRONIC_PICASSO_II_II_PLUS_REG ZORRO_ID(VILLAGE_TRONIC, 0x0C, 0) #define ZORRO_PROD_VILLAGE_TRONIC_PICASSO_II_II_PLUS_SEGMENTED_MODE ZORRO_ID(VILLAGE_TRONIC, 0x0D, 0) -#define ZORRO_PROD_VILLAGE_TRONIC_PICASSO_IV_Z2_MEM1 ZORRO_ID(VILLAGE_TRONIC, 0x15, 0) -#define ZORRO_PROD_VILLAGE_TRONIC_PICASSO_IV_Z2_MEM2 ZORRO_ID(VILLAGE_TRONIC, 0x16, 0) +#define ZORRO_PROD_VILLAGE_TRONIC_PICASSO_IV_Z2_RAM1 ZORRO_ID(VILLAGE_TRONIC, 0x15, 0) +#define ZORRO_PROD_VILLAGE_TRONIC_PICASSO_IV_Z2_RAM2 ZORRO_ID(VILLAGE_TRONIC, 0x16, 0) #define ZORRO_PROD_VILLAGE_TRONIC_PICASSO_IV_Z2_REG ZORRO_ID(VILLAGE_TRONIC, 0x17, 0) #define ZORRO_PROD_VILLAGE_TRONIC_PICASSO_IV_Z3 ZORRO_ID(VILLAGE_TRONIC, 0x18, 0) #define ZORRO_PROD_VILLAGE_TRONIC_ARIADNE ZORRO_ID(VILLAGE_TRONIC, 0xC9, 0) -- cgit v1.2.3 From b14dab792dee3245b628e046d80a7fad5573fea6 Mon Sep 17 00:00:00 2001 From: Jassi Brar Date: Thu, 13 Oct 2011 12:33:30 +0530 Subject: DMAEngine: Define interleaved transfer request api Define a new api that could be used for doing fancy data transfers like interleaved to contiguous copy and vice-versa. Traditional SG_list based transfers tend to be very inefficient in such cases as where the interleave and chunk are only a few bytes, which call for a very condensed api to convey pattern of the transfer. This api supports all 4 variants of scatter-gather and contiguous transfer. Of course, neither can this api help transfers that don't lend to DMA by nature, i.e, scattered tiny read/writes with no periodic pattern. Also since now we support SLAVE channels that might not provide device_prep_slave_sg callback but device_prep_interleaved_dma, remove the BUG_ON check. Signed-off-by: Jassi Brar Acked-by: Barry Song [renamed dmaxfer_template to dma_interleaved_template did fixup after the enum dma_transfer_merge] Signed-off-by: Vinod Koul --- include/linux/dmaengine.h | 78 +++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 75 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index a865b3a354cd..5532bb8b500c 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -71,10 +71,10 @@ enum dma_transaction_type { DMA_ASYNC_TX, DMA_SLAVE, DMA_CYCLIC, -}; - + DMA_INTERLEAVE, /* last transaction type for creation of the capabilities mask */ -#define DMA_TX_TYPE_END (DMA_CYCLIC + 1) + DMA_TX_TYPE_END, +}; /** * enum dma_transfer_direction - dma transfer mode and direction indicator @@ -90,6 +90,74 @@ enum dma_transfer_direction { DMA_DEV_TO_DEV, }; +/** + * Interleaved Transfer Request + * ---------------------------- + * A chunk is collection of contiguous bytes to be transfered. + * The gap(in bytes) between two chunks is called inter-chunk-gap(ICG). + * ICGs may or maynot change between chunks. + * A FRAME is the smallest series of contiguous {chunk,icg} pairs, + * that when repeated an integral number of times, specifies the transfer. + * A transfer template is specification of a Frame, the number of times + * it is to be repeated and other per-transfer attributes. + * + * Practically, a client driver would have ready a template for each + * type of transfer it is going to need during its lifetime and + * set only 'src_start' and 'dst_start' before submitting the requests. + * + * + * | Frame-1 | Frame-2 | ~ | Frame-'numf' | + * |====....==.===...=...|====....==.===...=...| ~ |====....==.===...=...| + * + * == Chunk size + * ... ICG + */ + +/** + * struct data_chunk - Element of scatter-gather list that makes a frame. + * @size: Number of bytes to read from source. + * size_dst := fn(op, size_src), so doesn't mean much for destination. + * @icg: Number of bytes to jump after last src/dst address of this + * chunk and before first src/dst address for next chunk. + * Ignored for dst(assumed 0), if dst_inc is true and dst_sgl is false. + * Ignored for src(assumed 0), if src_inc is true and src_sgl is false. + */ +struct data_chunk { + size_t size; + size_t icg; +}; + +/** + * struct dma_interleaved_template - Template to convey DMAC the transfer pattern + * and attributes. + * @src_start: Bus address of source for the first chunk. + * @dst_start: Bus address of destination for the first chunk. + * @dir: Specifies the type of Source and Destination. + * @src_inc: If the source address increments after reading from it. + * @dst_inc: If the destination address increments after writing to it. + * @src_sgl: If the 'icg' of sgl[] applies to Source (scattered read). + * Otherwise, source is read contiguously (icg ignored). + * Ignored if src_inc is false. + * @dst_sgl: If the 'icg' of sgl[] applies to Destination (scattered write). + * Otherwise, destination is filled contiguously (icg ignored). + * Ignored if dst_inc is false. + * @numf: Number of frames in this template. + * @frame_size: Number of chunks in a frame i.e, size of sgl[]. + * @sgl: Array of {chunk,icg} pairs that make up a frame. + */ +struct dma_interleaved_template { + dma_addr_t src_start; + dma_addr_t dst_start; + enum dma_transfer_direction dir; + bool src_inc; + bool dst_inc; + bool src_sgl; + bool dst_sgl; + size_t numf; + size_t frame_size; + struct data_chunk sgl[0]; +}; + /** * enum dma_ctrl_flags - DMA flags to augment operation preparation, * control completion, and communicate status. @@ -445,6 +513,7 @@ struct dma_tx_state { * @device_prep_dma_cyclic: prepare a cyclic dma operation suitable for audio. * The function takes a buffer of size buf_len. The callback function will * be called after period_len bytes have been transferred. + * @device_prep_interleaved_dma: Transfer expression in a generic way. * @device_control: manipulate all pending operations on a channel, returns * zero or error code * @device_tx_status: poll for transaction completion, the optional @@ -509,6 +578,9 @@ struct dma_device { struct dma_async_tx_descriptor *(*device_prep_dma_cyclic)( struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len, size_t period_len, enum dma_transfer_direction direction); + struct dma_async_tx_descriptor *(*device_prep_interleaved_dma)( + struct dma_chan *chan, struct dma_interleaved_template *xt, + unsigned long flags); int (*device_control)(struct dma_chan *chan, enum dma_ctrl_cmd cmd, unsigned long arg); -- cgit v1.2.3 From ca21a146a45a179a2a7bc86d938a2fbf571a7510 Mon Sep 17 00:00:00 2001 From: Rongjun Ying Date: Thu, 27 Oct 2011 19:22:39 -0700 Subject: dmaengine: add CSR SiRFprimaII DMAC driver Cc: Jassi Brar Cc: Arnd Bergmann Cc: Linus Walleij Signed-off-by: Rongjun Ying Signed-off-by: Barry Song [fixed direction enums and cyclic api based on changes already merged] Signed-off-by: Vinod Koul --- include/linux/sirfsoc_dma.h | 6 ++++++ 1 file changed, 6 insertions(+) create mode 100644 include/linux/sirfsoc_dma.h (limited to 'include/linux') diff --git a/include/linux/sirfsoc_dma.h b/include/linux/sirfsoc_dma.h new file mode 100644 index 000000000000..29d959333d81 --- /dev/null +++ b/include/linux/sirfsoc_dma.h @@ -0,0 +1,6 @@ +#ifndef _SIRFSOC_DMA_H_ +#define _SIRFSOC_DMA_H_ + +bool sirfsoc_dma_filter_id(struct dma_chan *chan, void *chan_id); + +#endif -- cgit v1.2.3 From f528f0b8e53d73b18be71e96693cfab9322f33c7 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Mon, 26 Sep 2011 17:12:53 +0100 Subject: kmemleak: Handle percpu memory allocation This patch adds kmemleak callbacks from the percpu allocator, reducing a number of false positives caused by kmemleak not scanning such memory blocks. The percpu chunks are never reported as leaks because of current kmemleak limitations with the __percpu pointer not pointing directly to the actual chunks. Reported-by: Huajun Li Acked-by: Christoph Lameter Acked-by: Tejun Heo Signed-off-by: Catalin Marinas --- include/linux/kmemleak.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/kmemleak.h b/include/linux/kmemleak.h index 99d9a6766f7e..2a5e5548a1d2 100644 --- a/include/linux/kmemleak.h +++ b/include/linux/kmemleak.h @@ -26,8 +26,10 @@ extern void kmemleak_init(void) __ref; extern void kmemleak_alloc(const void *ptr, size_t size, int min_count, gfp_t gfp) __ref; +extern void kmemleak_alloc_percpu(const void __percpu *ptr, size_t size) __ref; extern void kmemleak_free(const void *ptr) __ref; extern void kmemleak_free_part(const void *ptr, size_t size) __ref; +extern void kmemleak_free_percpu(const void __percpu *ptr) __ref; extern void kmemleak_padding(const void *ptr, unsigned long offset, size_t size) __ref; extern void kmemleak_not_leak(const void *ptr) __ref; @@ -68,6 +70,9 @@ static inline void kmemleak_alloc_recursive(const void *ptr, size_t size, gfp_t gfp) { } +static inline void kmemleak_alloc_percpu(const void __percpu *ptr, size_t size) +{ +} static inline void kmemleak_free(const void *ptr) { } @@ -77,6 +82,9 @@ static inline void kmemleak_free_part(const void *ptr, size_t size) static inline void kmemleak_free_recursive(const void *ptr, unsigned long flags) { } +static inline void kmemleak_free_percpu(const void __percpu *ptr) +{ +} static inline void kmemleak_not_leak(const void *ptr) { } -- cgit v1.2.3 From 7710ec36b6f516e026f9e29e50e67d2547c2a79b Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Fri, 25 Nov 2011 18:44:05 -0500 Subject: svcrpc: make svc_delete_xprt static Signed-off-by: J. Bruce Fields --- include/linux/sunrpc/svc_xprt.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/sunrpc/svc_xprt.h b/include/linux/sunrpc/svc_xprt.h index 8620f79658d4..5488e593160a 100644 --- a/include/linux/sunrpc/svc_xprt.h +++ b/include/linux/sunrpc/svc_xprt.h @@ -118,7 +118,6 @@ void svc_xprt_received(struct svc_xprt *); void svc_xprt_put(struct svc_xprt *xprt); void svc_xprt_copy_addrs(struct svc_rqst *rqstp, struct svc_xprt *xprt); void svc_close_xprt(struct svc_xprt *xprt); -void svc_delete_xprt(struct svc_xprt *xprt); int svc_port_is_privileged(struct sockaddr *sin); int svc_print_xprts(char *buf, int maxlen); struct svc_xprt *svc_find_xprt(struct svc_serv *serv, const char *xcl_name, -- cgit v1.2.3 From 2fefb8a09e7ed251ae8996e0c69066e74c5aa560 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Tue, 29 Nov 2011 11:35:35 -0500 Subject: svcrpc: destroy server sockets all at once There's no reason I can see that we need to call sv_shutdown between closing the two lists of sockets. Cc: stable@kernel.org Signed-off-by: J. Bruce Fields --- include/linux/sunrpc/svcsock.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/sunrpc/svcsock.h b/include/linux/sunrpc/svcsock.h index 85c50b40759d..c84e9741cb2a 100644 --- a/include/linux/sunrpc/svcsock.h +++ b/include/linux/sunrpc/svcsock.h @@ -34,7 +34,7 @@ struct svc_sock { /* * Function prototypes. */ -void svc_close_all(struct list_head *); +void svc_close_all(struct svc_serv *); int svc_recv(struct svc_rqst *, long); int svc_send(struct svc_rqst *); void svc_drop(struct svc_rqst *); -- cgit v1.2.3 From bd4620ddf6d6eb3d9e7d073ad601fa4299d46ba9 Mon Sep 17 00:00:00 2001 From: Stanislav Kinsbursky Date: Tue, 6 Dec 2011 14:19:10 +0300 Subject: SUNRPC: create svc_xprt in proper network namespace This patch makes svc_xprt inherit network namespace link from its socket. Signed-off-by: Stanislav Kinsbursky Signed-off-by: J. Bruce Fields --- include/linux/sunrpc/svc_xprt.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/sunrpc/svc_xprt.h b/include/linux/sunrpc/svc_xprt.h index 5488e593160a..dfa900948af7 100644 --- a/include/linux/sunrpc/svc_xprt.h +++ b/include/linux/sunrpc/svc_xprt.h @@ -109,7 +109,7 @@ static inline int register_xpt_user(struct svc_xprt *xpt, struct svc_xpt_user *u int svc_reg_xprt_class(struct svc_xprt_class *); void svc_unreg_xprt_class(struct svc_xprt_class *); -void svc_xprt_init(struct svc_xprt_class *, struct svc_xprt *, +void svc_xprt_init(struct net *, struct svc_xprt_class *, struct svc_xprt *, struct svc_serv *); int svc_create_xprt(struct svc_serv *, const char *, struct net *, const int, const unsigned short, int); -- cgit v1.2.3 From d57f341ba08c9f34ccd45a89729e73174d4a3325 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Mon, 20 Jun 2011 19:26:11 +0200 Subject: SERIAL: AR933X: Add driver for the built-in UART of the SoC This patch adds the driver for the built-in UART of the Atheros AR933X SoCs. Signed-off-by: Gabor Juhos Cc: linux-mips@linux-mips.org Cc: Kathy Giori Cc: "Luis R. Rodriguez" Cc: Alan Cox Cc: linux-serial@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/2526/ Signed-off-by: Alan Cox Signed-off-by: Ralf Baechle --- include/linux/serial_core.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index eadf33d0abba..3c35fb2f688f 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -207,6 +207,10 @@ /* Xilinx PSS UART */ #define PORT_XUARTPS 98 +/* Atheros AR933X SoC */ +#define PORT_AR933X 99 + + #ifdef __KERNEL__ #include -- cgit v1.2.3 From 267aed9dfeb2225960043f89db1f58d8ab522797 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 12 Dec 2011 13:54:36 +0000 Subject: UAPI: elf_read_implies_exec() is a kernel-only feature - so hide from userspace elf_read_implies_exec() is a kernel-only feature as the second parameter is a constant that isn't exported to userspace. Not only that, but the arch-specific overrides are not exported either. So hide the macro from userspace. Similarly, struct file should not be predeclared in userspace. Signed-off-by: David Howells --- include/linux/elf.h | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'include/linux') diff --git a/include/linux/elf.h b/include/linux/elf.h index 31f0508d7da7..999b4f52e8e5 100644 --- a/include/linux/elf.h +++ b/include/linux/elf.h @@ -7,15 +7,6 @@ #include #endif -struct file; - -#ifndef elf_read_implies_exec - /* Executables for which elf_read_implies_exec() returns TRUE will - have the READ_IMPLIES_EXEC personality flag set automatically. - Override in asm/elf.h as needed. */ -# define elf_read_implies_exec(ex, have_pt_gnu_stack) 0 -#endif - /* 32-bit ELF base types. */ typedef __u32 Elf32_Addr; typedef __u16 Elf32_Half; @@ -414,6 +405,13 @@ typedef struct elf64_note { } Elf64_Nhdr; #ifdef __KERNEL__ +#ifndef elf_read_implies_exec + /* Executables for which elf_read_implies_exec() returns TRUE will + have the READ_IMPLIES_EXEC personality flag set automatically. + Override in asm/elf.h as needed. */ +# define elf_read_implies_exec(ex, have_pt_gnu_stack) 0 +#endif + #if ELF_CLASS == ELFCLASS32 extern Elf32_Dyn _DYNAMIC []; @@ -437,6 +435,8 @@ extern Elf64_Dyn _DYNAMIC []; #endif /* Optional callbacks to write extra ELF notes. */ +struct file; + #ifndef ARCH_HAVE_EXTRA_ELF_NOTES static inline int elf_coredump_extra_notes_size(void) { return 0; } static inline int elf_coredump_extra_notes_write(struct file *file, -- cgit v1.2.3 From ba2780c796badfc3741c7cb499a575ca49f17e6d Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Sun, 13 Nov 2011 18:47:44 -0300 Subject: [media] DVB: Query DVB frontend delivery capabilities Currently, for any multi-standard frontend it is assumed that it just has a single standard capability. This is fine in some cases, but makes things hard when there are incompatible standards in conjuction. Eg: DVB-S can be seen as a subset of DVB-S2, but the same doesn't hold the same for DSS. This is not specific to any driver as it is, but a generic issue. This was handled correctly in the multiproto tree, while such functionality is missing from the v5 API update. http://www.linuxtv.org/pipermail/vdr/2008-November/018417.html Later on a FE_CAN_2G_MODULATION was added as a hack to workaround this issue in the v5 API, but that hack is incapable of addressing the issue, as it can be used to simply distinguish between DVB-S and DVB-S2 alone, or another X vs X2 modulation. If there are more systems, then you have a potential issue. An application needs to query the device capabilities before requesting any operation from the device. Signed-off-by: Manu Abraham Acked-by: Andreas Oberritter Acked-by: Oliver Endriss Signed-off-by: Mauro Carvalho Chehab --- include/linux/dvb/frontend.h | 4 +++- include/linux/dvb/version.h | 2 +- 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h index d9251df867b5..cb114f52ccf7 100644 --- a/include/linux/dvb/frontend.h +++ b/include/linux/dvb/frontend.h @@ -316,7 +316,9 @@ struct dvb_frontend_event { #define DTV_DVBT2_PLP_ID 43 -#define DTV_MAX_COMMAND DTV_DVBT2_PLP_ID +#define DTV_ENUM_DELSYS 44 + +#define DTV_MAX_COMMAND DTV_ENUM_DELSYS typedef enum fe_pilot { PILOT_ON, diff --git a/include/linux/dvb/version.h b/include/linux/dvb/version.h index 66594b1d5d7b..0559e2bd38f9 100644 --- a/include/linux/dvb/version.h +++ b/include/linux/dvb/version.h @@ -24,6 +24,6 @@ #define _DVBVERSION_H_ #define DVB_API_VERSION 5 -#define DVB_API_VERSION_MINOR 4 +#define DVB_API_VERSION_MINOR 5 #endif /*_DVBVERSION_H_*/ -- cgit v1.2.3 From 6682bb86fe1f3dba7e9cb1f0955775604599cea8 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 13 Dec 2011 09:26:45 +0000 Subject: UAPI: Guard linux/sound.h Place reinclusion guards on linux/sound.h otherwise the UAPI splitter script won't insert a #include to make the kernel header include the UAPI header. Signed-off-by: David Howells --- include/linux/sound.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/sound.h b/include/linux/sound.h index 44dcf0570432..fae20ba01fbf 100644 --- a/include/linux/sound.h +++ b/include/linux/sound.h @@ -1,3 +1,5 @@ +#ifndef _LINUX_SOUND_H +#define _LINUX_SOUND_H /* * Minor numbers for the sound driver. @@ -42,3 +44,5 @@ extern void unregister_sound_mixer(int unit); extern void unregister_sound_midi(int unit); extern void unregister_sound_dsp(int unit); #endif /* __KERNEL__ */ + +#endif /* _LINUX_SOUND_H */ -- cgit v1.2.3 From c15a48d60697f06a847c5862b94a6e24d1b48a7b Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 13 Dec 2011 09:26:45 +0000 Subject: UAPI: Guard linux/isdn_divertif.h Place reinclusion guards on linux/isdn_divertif.h otherwise the UAPI splitter script won't insert the #include to include the UAPI header from the kernel header. Signed-off-by: David Howells --- include/linux/isdn_divertif.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/isdn_divertif.h b/include/linux/isdn_divertif.h index 07821ca5955f..a5a50f523807 100644 --- a/include/linux/isdn_divertif.h +++ b/include/linux/isdn_divertif.h @@ -10,6 +10,8 @@ * */ +#ifndef _LINUX_ISDN_DIVERTIF_H +#define _LINUX_ISDN_DIVERTIF_H /***********************************************************/ /* magic value is also used to control version information */ @@ -45,3 +47,5 @@ typedef struct /*********************/ extern int DIVERT_REG_NAME(isdn_divert_if *); #endif + +#endif /* _LINUX_ISDN_DIVERTIF_H */ -- cgit v1.2.3 From 6c9f2ef9b5b3a84952ba2f99472f82e3398ac3e9 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 13 Dec 2011 09:26:45 +0000 Subject: UAPI: Guard linux/pmu.h Place reinclusion guards on linux/pmu.h otherwise the UAPI splitter won't insert the #include to include the UAPI header from the kernel header. Signed-off-by: David Howells --- include/linux/pmu.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pmu.h b/include/linux/pmu.h index cafe98d96948..84e6a55a1202 100644 --- a/include/linux/pmu.h +++ b/include/linux/pmu.h @@ -6,6 +6,8 @@ * Copyright (C) 1998 Paul Mackerras. */ +#ifndef _LINUX_PMU_H +#define _LINUX_PMU_H #define PMU_DRIVER_VERSION 2 @@ -207,3 +209,5 @@ extern int pmu_sys_suspended; #endif #endif /* __KERNEL__ */ + +#endif /* _LINUX_PMU_H */ -- cgit v1.2.3 From fde28451359b476ba065a9a16fa83aa44168fe59 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 13 Dec 2011 09:26:45 +0000 Subject: UAPI: Guard linux/cuda.h Place reinclusion guards on linux/cuda.h otherwise the UAPI splitter script won't insert a #include to make the kernel header include the UAPI header. Signed-off-by: David Howells --- include/linux/cuda.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/cuda.h b/include/linux/cuda.h index 6a3e6385d3f3..9f9865ff781e 100644 --- a/include/linux/cuda.h +++ b/include/linux/cuda.h @@ -5,6 +5,9 @@ * Copyright (C) 1996 Paul Mackerras. */ +#ifndef _LINUX_CUDA_H +#define _LINUX_CUDA_H + /* CUDA commands (2nd byte) */ #define CUDA_WARM_START 0 #define CUDA_AUTOPOLL 1 @@ -34,3 +37,5 @@ extern int cuda_request(struct adb_request *req, extern void cuda_poll(void); #endif /* __KERNEL */ + +#endif /* _LINUX_CUDA_H */ -- cgit v1.2.3 From a648bd0c9f613d8f9954eccff6009ecfb26e2722 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 13 Dec 2011 15:07:49 +0000 Subject: UAPI: Make linux/patchkey.h easier to parse Make linux/patchkey.h easier to parse by making the #elif case associated with the __KERNEL__ guard a nested #if in a #else of the __KERNEL__ guard. Signed-off-by: David Howells --- include/linux/patchkey.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/patchkey.h b/include/linux/patchkey.h index d974a6e92372..aefda0ec6e62 100644 --- a/include/linux/patchkey.h +++ b/include/linux/patchkey.h @@ -32,7 +32,8 @@ # else # error "could not determine byte order" # endif -#elif defined(__BYTE_ORDER) +#else +#if defined(__BYTE_ORDER) # if __BYTE_ORDER == __BIG_ENDIAN # define _PATCHKEY(id) (0xfd00|id) # elif __BYTE_ORDER == __LITTLE_ENDIAN @@ -41,5 +42,6 @@ # error "could not determine byte order" # endif #endif +#endif #endif /* _LINUX_PATCHKEY_H */ -- cgit v1.2.3 From 989e986f5b1748fe3ff714954dc0d23780c43a9c Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 13 Dec 2011 15:07:49 +0000 Subject: UAPI: Fix AHZ multiple inclusion when __KERNEL__ is removed Fix AHZ multiple inclusion when __KERNEL__ is removed as part of the separation of the userspace headers from the kernel headers. Signed-off-by: David Howells --- include/linux/acct.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/acct.h b/include/linux/acct.h index 3e4737fa6cce..d537aa0ec414 100644 --- a/include/linux/acct.h +++ b/include/linux/acct.h @@ -146,6 +146,9 @@ extern void acct_exit_ns(struct pid_namespace *); * */ +#undef ACCT_VERSION +#undef AHZ + #ifdef CONFIG_BSD_PROCESS_ACCT_V3 #define ACCT_VERSION 3 #define AHZ 100 -- cgit v1.2.3 From fdc29805bd7cae133303045fc0249d76f3827613 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 13 Dec 2011 15:07:49 +0000 Subject: UAPI: Don't have a #elif clause in a __KERNEL__ guard in linux/soundcard.h Don't have a #elif clause in a __KERNEL__ guard in linux/soundcard.h to make parsing easier. Signed-off-by: David Howells --- include/linux/soundcard.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/soundcard.h b/include/linux/soundcard.h index fe204fe39f7c..dfcf86f013a9 100644 --- a/include/linux/soundcard.h +++ b/include/linux/soundcard.h @@ -198,7 +198,8 @@ typedef struct seq_event_rec { # else # error "could not determine byte order" # endif -#elif defined(__BYTE_ORDER) +#else +# if defined(__BYTE_ORDER) # if __BYTE_ORDER == __BIG_ENDIAN # define AFMT_S16_NE AFMT_S16_BE # elif __BYTE_ORDER == __LITTLE_ENDIAN @@ -206,6 +207,7 @@ typedef struct seq_event_rec { # else # error "could not determine byte order" # endif +# endif #endif /* -- cgit v1.2.3 From 1632b9e2a14ce9f4e08faf6c4380431d63319bd3 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 13 Dec 2011 15:07:49 +0000 Subject: UAPI: Split trivial #if defined(__KERNEL__) && X conditionals Split trivial #if defined(__KERNEL__) && X conditionals to make automated disintegration easier. Signed-off-by: David Howells --- include/linux/mroute6.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mroute6.h b/include/linux/mroute6.h index a3759cb0ac10..6d8c7251eb8d 100644 --- a/include/linux/mroute6.h +++ b/include/linux/mroute6.h @@ -43,9 +43,11 @@ typedef unsigned short mifi_t; typedef __u32 if_mask; #define NIFBITS (sizeof(if_mask) * 8) /* bits per mask */ -#if !defined(__KERNEL__) && !defined(DIV_ROUND_UP) +#if !defined(__KERNEL__) +#if !defined(DIV_ROUND_UP) #define DIV_ROUND_UP(x,y) (((x) + ((y) - 1)) / (y)) #endif +#endif typedef struct if_set { if_mask ifs_bits[DIV_ROUND_UP(IF_SETSIZE, NIFBITS)]; -- cgit v1.2.3 From 1ba64edef6051d2ec79bb2fbd3a0c8f0df00ab55 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 14 Dec 2011 00:33:37 +0100 Subject: block, sx8: kill blk_insert_request() The only user left for blk_insert_request() is sx8 and it can be trivially switched to use blk_execute_rq_nowait() - special requests aren't included in io stat and sx8 doesn't use block layer tagging. Switch sx8 and kill blk_insert_requeset(). This patch doesn't introduce any functional difference. Only compile tested. Signed-off-by: Tejun Heo Acked-by: Jeff Garzik Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index c7a6d3b5bc7b..8a6b51b13a1c 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -660,7 +660,6 @@ extern void __blk_put_request(struct request_queue *, struct request *); extern struct request *blk_get_request(struct request_queue *, int, gfp_t); extern struct request *blk_make_request(struct request_queue *, struct bio *, gfp_t); -extern void blk_insert_request(struct request_queue *, struct request *, int, void *); extern void blk_requeue_request(struct request_queue *, struct request *); extern void blk_add_request_payload(struct request *rq, struct page *page, unsigned int len); -- cgit v1.2.3 From 34f6055c80285e4efb3f602a9119db75239744dc Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 14 Dec 2011 00:33:37 +0100 Subject: block: add blk_queue_dead() There are a number of QUEUE_FLAG_DEAD tests. Add blk_queue_dead() macro and use it. This patch doesn't introduce any functional difference. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 8a6b51b13a1c..783f97c14d0a 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -481,6 +481,7 @@ static inline void queue_flag_clear(unsigned int flag, struct request_queue *q) #define blk_queue_tagged(q) test_bit(QUEUE_FLAG_QUEUED, &(q)->queue_flags) #define blk_queue_stopped(q) test_bit(QUEUE_FLAG_STOPPED, &(q)->queue_flags) +#define blk_queue_dead(q) test_bit(QUEUE_FLAG_DEAD, &(q)->queue_flags) #define blk_queue_nomerges(q) test_bit(QUEUE_FLAG_NOMERGES, &(q)->queue_flags) #define blk_queue_noxmerges(q) \ test_bit(QUEUE_FLAG_NOXMERGES, &(q)->queue_flags) -- cgit v1.2.3 From a73f730d013ff2788389fd0c46ad3e5510f124e6 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 14 Dec 2011 00:33:37 +0100 Subject: block, cfq: move cfqd->cic_index to q->id cfq allocates per-queue id using ida and uses it to index cic radix tree from io_context. Move it to q->id and allocate on queue init and free on queue release. This simplifies cfq a bit and will allow for further improvements of io context life-cycle management. This patch doesn't introduce any functional difference. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 783f97c14d0a..8c8dbc4738ea 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -310,6 +310,12 @@ struct request_queue { */ unsigned long queue_flags; + /* + * ida allocated id for this queue. Used to index queues from + * ioctx. + */ + int id; + /* * queue needs bounce pages for pages above this limit */ -- cgit v1.2.3 From 42ec57a8f68311bbbf4ff96a5d33c8a2e90b9d05 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 14 Dec 2011 00:33:37 +0100 Subject: block: misc ioc cleanups * int return from put_io_context() wasn't used by anybody. Make it return void like other put functions and docbook-fy the function comment. * Reorder dummy declarations for !CONFIG_BLOCK case a bit. * Make alloc_ioc_context() use __GFP_ZERO allocation, take init out of if block and drop 0'ing. * Docbook-fy current_io_context() comment. This patch doesn't introduce any functional change. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- include/linux/iocontext.h | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) (limited to 'include/linux') diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h index 5037a0ad2312..8a6ecb66346f 100644 --- a/include/linux/iocontext.h +++ b/include/linux/iocontext.h @@ -76,20 +76,14 @@ static inline struct io_context *ioc_task_link(struct io_context *ioc) struct task_struct; #ifdef CONFIG_BLOCK -int put_io_context(struct io_context *ioc); +void put_io_context(struct io_context *ioc); void exit_io_context(struct task_struct *task); struct io_context *get_io_context(gfp_t gfp_flags, int node); struct io_context *alloc_io_context(gfp_t gfp_flags, int node); #else -static inline void exit_io_context(struct task_struct *task) -{ -} - struct io_context; -static inline int put_io_context(struct io_context *ioc) -{ - return 1; -} +static inline void put_io_context(struct io_context *ioc) { } +static inline void exit_io_context(struct task_struct *task) { } #endif #endif -- cgit v1.2.3 From 6e736be7f282fff705db7c34a15313281b372a76 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 14 Dec 2011 00:33:38 +0100 Subject: block: make ioc get/put interface more conventional and fix race on alloction Ignoring copy_io() during fork, io_context can be allocated from two places - current_io_context() and set_task_ioprio(). The former is always called from local task while the latter can be called from different task. The synchornization between them are peculiar and dubious. * current_io_context() doesn't grab task_lock() and assumes that if it saw %NULL ->io_context, it would stay that way until allocation and assignment is complete. It has smp_wmb() between alloc/init and assignment. * set_task_ioprio() grabs task_lock() for assignment and does smp_read_barrier_depends() between "ioc = task->io_context" and "if (ioc)". Unfortunately, this doesn't achieve anything - the latter is not a dependent load of the former. ie, if ioc itself were being dereferenced "ioc->xxx", it would mean something (not sure what tho) but as the code currently stands, the dependent read barrier is noop. As only one of the the two test-assignment sequences is task_lock() protected, the task_lock() can't do much about race between the two. Nothing prevents current_io_context() and set_task_ioprio() allocating its own ioc for the same task and overwriting the other's. Also, set_task_ioprio() can race with exiting task and create a new ioc after exit_io_context() is finished. ioc get/put doesn't have any reason to be complex. The only hot path is accessing the existing ioc of %current, which is simple to achieve given that ->io_context is never destroyed as long as the task is alive. All other paths can happily go through task_lock() like all other task sub structures without impacting anything. This patch updates ioc get/put so that it becomes more conventional. * alloc_io_context() is replaced with get_task_io_context(). This is the only interface which can acquire access to ioc of another task. On return, the caller has an explicit reference to the object which should be put using put_io_context() afterwards. * The functionality of current_io_context() remains the same but when creating a new ioc, it shares the code path with get_task_io_context() and always goes through task_lock(). * get_io_context() now means incrementing ref on an ioc which the caller already has access to (be that an explicit refcnt or implicit %current one). * PF_EXITING inhibits creation of new io_context and once exit_io_context() is finished, it's guaranteed that both ioc acquisition functions return %NULL. * All users are updated. Most are trivial but smp_read_barrier_depends() removal from cfq_get_io_context() needs a bit of explanation. I suppose the original intention was to ensure ioc->ioprio is visible when set_task_ioprio() allocates new io_context and installs it; however, this wouldn't have worked because set_task_ioprio() doesn't have wmb between init and install. There are other problems with this which will be fixed in another patch. * While at it, use NUMA_NO_NODE instead of -1 for wildcard node specification. -v2: Vivek spotted contamination from debug patch. Removed. Signed-off-by: Tejun Heo Cc: Vivek Goyal Signed-off-by: Jens Axboe --- include/linux/iocontext.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h index 8a6ecb66346f..28bb621ef5a2 100644 --- a/include/linux/iocontext.h +++ b/include/linux/iocontext.h @@ -78,8 +78,8 @@ struct task_struct; #ifdef CONFIG_BLOCK void put_io_context(struct io_context *ioc); void exit_io_context(struct task_struct *task); -struct io_context *get_io_context(gfp_t gfp_flags, int node); -struct io_context *alloc_io_context(gfp_t gfp_flags, int node); +struct io_context *get_task_io_context(struct task_struct *task, + gfp_t gfp_flags, int node); #else struct io_context; static inline void put_io_context(struct io_context *ioc) { } -- cgit v1.2.3 From 09ac46c429464c919d04bb737b27edd84d944f02 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 14 Dec 2011 00:33:38 +0100 Subject: block: misc updates to blk_get_queue() * blk_get_queue() is peculiar in that it returns 0 on success and 1 on failure instead of 0 / -errno or boolean. Update it such that it returns %true on success and %false on failure. * Make sure the caller checks for the return value. * Separate out __blk_get_queue() which doesn't check whether @q is dead and put it in blk.h. This will be used later. This patch doesn't introduce any functional changes. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 8c8dbc4738ea..d1b6f4ed1f96 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -865,7 +865,7 @@ extern int blk_rq_map_sg(struct request_queue *, struct request *, struct scatte extern void blk_dump_rq_flags(struct request *, char *); extern long nr_blockdev_pages(void); -int blk_get_queue(struct request_queue *); +bool __must_check blk_get_queue(struct request_queue *); struct request_queue *blk_alloc_queue(gfp_t); struct request_queue *blk_alloc_queue_node(gfp_t, int); extern void blk_put_queue(struct request_queue *); -- cgit v1.2.3 From 283287a52e3c3f7f8f9da747f4b8c5202740d776 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 14 Dec 2011 00:33:38 +0100 Subject: block, cfq: misc updates to cfq_io_context Make the following changes to prepare for ioc/cic management cleanup. * Add cic->q so that ioc can determine the associated queue without querying cfq. This will eventually replace ->key. * Factor out cfq_release_cic() from cic_free_func(). This function assumes that the caller handled locking. * Rename __cfq_exit_single_io_context() to cfq_exit_cic() and make it take only @cic. * Restructure cfq_cic_link() for future updates. This patch doesn't introduce any functional changes. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- include/linux/iocontext.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h index 28bb621ef5a2..079aea8fd8a8 100644 --- a/include/linux/iocontext.h +++ b/include/linux/iocontext.h @@ -15,6 +15,7 @@ struct cfq_ttime { struct cfq_io_context { void *key; + struct request_queue *q; struct cfq_queue *cfqq[2]; -- cgit v1.2.3 From dc86900e0a8f665122de6faadd27fb4c6d2b3e4d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 14 Dec 2011 00:33:38 +0100 Subject: block, cfq: move ioc ioprio/cgroup changed handling to cic ioprio/cgroup change was handled by marking the changed state in ioc and, on the following access to the ioc, performing RCU-protected iteration through all cic's grabbing the matching queue_lock. This patch moves the changed state to each cic. When ioprio or cgroup changes, the respective bit is set on all cic's of the ioc and when each of those cic (not ioc) is accessed, change is applied for that specific ioc-queue pair. This also fixes the following two race conditions between setting and clearing of changed states. * Missing barrier between assign/load of ioprio and ioprio_changed allowed applying old ioprio. * Change requests could happen between application of change and clearing of changed variables. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- include/linux/iocontext.h | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h index 079aea8fd8a8..2c2b6da96b3c 100644 --- a/include/linux/iocontext.h +++ b/include/linux/iocontext.h @@ -13,6 +13,11 @@ struct cfq_ttime { unsigned long ttime_mean; }; +enum { + CIC_IOPRIO_CHANGED, + CIC_CGROUP_CHANGED, +}; + struct cfq_io_context { void *key; struct request_queue *q; @@ -26,6 +31,8 @@ struct cfq_io_context { struct list_head queue_list; struct hlist_node cic_list; + unsigned long changed; + void (*dtor)(struct io_context *); /* destructor */ void (*exit)(struct io_context *); /* called on task exit */ @@ -44,11 +51,6 @@ struct io_context { spinlock_t lock; unsigned short ioprio; - unsigned short ioprio_changed; - -#if defined(CONFIG_BLK_CGROUP) || defined(CONFIG_BLK_CGROUP_MODULE) - unsigned short cgroup_changed; -#endif /* * For request batching @@ -81,6 +83,8 @@ void put_io_context(struct io_context *ioc); void exit_io_context(struct task_struct *task); struct io_context *get_task_io_context(struct task_struct *task, gfp_t gfp_flags, int node); +void ioc_ioprio_changed(struct io_context *ioc, int ioprio); +void ioc_cgroup_changed(struct io_context *ioc); #else struct io_context; static inline void put_io_context(struct io_context *ioc) { } -- cgit v1.2.3 From b2efa05265d62bc29f3a64400fad4b44340eedb8 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 14 Dec 2011 00:33:39 +0100 Subject: block, cfq: unlink cfq_io_context's immediately cic is association between io_context and request_queue. A cic is linked from both ioc and q and should be destroyed when either one goes away. As ioc and q both have their own locks, locking becomes a bit complex - both orders work for removal from one but not from the other. Currently, cfq tries to circumvent this locking order issue with RCU. ioc->lock nests inside queue_lock but the radix tree and cic's are also protected by RCU allowing either side to walk their lists without grabbing lock. This rather unconventional use of RCU quickly devolves into extremely fragile convolution. e.g. The following is from cfqd going away too soon after ioc and q exits raced. general protection fault: 0000 [#1] PREEMPT SMP CPU 2 Modules linked in: [ 88.503444] Pid: 599, comm: hexdump Not tainted 3.1.0-rc10-work+ #158 Bochs Bochs RIP: 0010:[] [] cfq_exit_single_io_context+0x58/0xf0 ... Call Trace: [] call_for_each_cic+0x5a/0x90 [] cfq_exit_io_context+0x15/0x20 [] exit_io_context+0x100/0x140 [] do_exit+0x579/0x850 [] do_group_exit+0x5b/0xd0 [] sys_exit_group+0x17/0x20 [] system_call_fastpath+0x16/0x1b The only real hot path here is cic lookup during request initialization and avoiding extra locking requires very confined use of RCU. This patch makes cic removal from both ioc and request_queue perform double-locking and unlink immediately. * From q side, the change is almost trivial as ioc->lock nests inside queue_lock. It just needs to grab each ioc->lock as it walks cic_list and unlink it. * From ioc side, it's a bit more difficult because of inversed lock order. ioc needs its lock to walk its cic_list but can't grab the matching queue_lock and needs to perform unlock-relock dancing. Unlinking is now wholly done from put_io_context() and fast path is optimized by using the queue_lock the caller already holds, which is by far the most common case. If the ioc accessed multiple devices, it tries with trylock. In unlikely cases of fast path failure, it falls back to full double-locking dance from workqueue. Double-locking isn't the prettiest thing in the world but it's *far* simpler and more understandable than RCU trick without adding any meaningful overhead. This still leaves a lot of now unnecessary RCU logics. Future patches will trim them. -v2: Vivek pointed out that cic->q was being dereferenced after cic->release() was called. Updated to use local variable @this_q instead. Signed-off-by: Tejun Heo Cc: Vivek Goyal Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 3 +++ include/linux/iocontext.h | 12 ++++++++---- 2 files changed, 11 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index d1b6f4ed1f96..65c2f8c70089 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -393,6 +393,9 @@ struct request_queue { /* Throttle data */ struct throtl_data *td; #endif +#ifdef CONFIG_LOCKDEP + int ioc_release_depth; +#endif }; #define QUEUE_FLAG_QUEUED 1 /* uses generic tag queueing */ diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h index 2c2b6da96b3c..01e863128780 100644 --- a/include/linux/iocontext.h +++ b/include/linux/iocontext.h @@ -3,6 +3,7 @@ #include #include +#include struct cfq_queue; struct cfq_ttime { @@ -33,8 +34,8 @@ struct cfq_io_context { unsigned long changed; - void (*dtor)(struct io_context *); /* destructor */ - void (*exit)(struct io_context *); /* called on task exit */ + void (*exit)(struct cfq_io_context *); + void (*release)(struct cfq_io_context *); struct rcu_head rcu_head; }; @@ -61,6 +62,8 @@ struct io_context { struct radix_tree_root radix_root; struct hlist_head cic_list; void __rcu *ioc_data; + + struct work_struct release_work; }; static inline struct io_context *ioc_task_link(struct io_context *ioc) @@ -79,7 +82,7 @@ static inline struct io_context *ioc_task_link(struct io_context *ioc) struct task_struct; #ifdef CONFIG_BLOCK -void put_io_context(struct io_context *ioc); +void put_io_context(struct io_context *ioc, struct request_queue *locked_q); void exit_io_context(struct task_struct *task); struct io_context *get_task_io_context(struct task_struct *task, gfp_t gfp_flags, int node); @@ -87,7 +90,8 @@ void ioc_ioprio_changed(struct io_context *ioc, int ioprio); void ioc_cgroup_changed(struct io_context *ioc); #else struct io_context; -static inline void put_io_context(struct io_context *ioc) { } +static inline void put_io_context(struct io_context *ioc, + struct request_queue *locked_q) { } static inline void exit_io_context(struct task_struct *task) { } #endif -- cgit v1.2.3 From b9a1920837bc53430d339380e393a6e4c372939f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 14 Dec 2011 00:33:39 +0100 Subject: block, cfq: remove delayed unlink Now that all cic's are immediately unlinked from both ioc and queue, lazy dropping from lookup path and trimming on elevator unregister are unnecessary. Kill them and remove now unused elevator_ops->trim(). This also leaves call_for_each_cic() without any user. Removed. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- include/linux/elevator.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/elevator.h b/include/linux/elevator.h index 1d0f7a2ff73b..581dd1bd3d3e 100644 --- a/include/linux/elevator.h +++ b/include/linux/elevator.h @@ -63,7 +63,6 @@ struct elevator_ops elevator_init_fn *elevator_init_fn; elevator_exit_fn *elevator_exit_fn; - void (*trim)(struct io_context *); }; #define ELV_NAME_MAX (16) -- cgit v1.2.3 From b50b636bce6293fa858cc7ff6c3ffe4920d90006 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 14 Dec 2011 00:33:39 +0100 Subject: block, cfq: kill ioc_gone Now that cic's are immediately unlinked under both locks, there's no need to count and drain cic's before module unload. RCU callback completion is waited with rcu_barrier(). While at it, remove residual RCU operations on cic_list. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- include/linux/elevator.h | 17 ----------------- 1 file changed, 17 deletions(-) (limited to 'include/linux') diff --git a/include/linux/elevator.h b/include/linux/elevator.h index 581dd1bd3d3e..02604c89ddde 100644 --- a/include/linux/elevator.h +++ b/include/linux/elevator.h @@ -196,22 +196,5 @@ enum { INIT_LIST_HEAD(&(rq)->csd.list); \ } while (0) -/* - * io context count accounting - */ -#define elv_ioc_count_mod(name, __val) this_cpu_add(name, __val) -#define elv_ioc_count_inc(name) this_cpu_inc(name) -#define elv_ioc_count_dec(name) this_cpu_dec(name) - -#define elv_ioc_count_read(name) \ -({ \ - unsigned long __val = 0; \ - int __cpu; \ - smp_wmb(); \ - for_each_possible_cpu(__cpu) \ - __val += per_cpu(name, __cpu); \ - __val; \ -}) - #endif /* CONFIG_BLOCK */ #endif -- cgit v1.2.3 From 1238033c79e92e5c315af12e45396f1a78c73dec Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 14 Dec 2011 00:33:40 +0100 Subject: block, cfq: kill cic->key Now that lazy paths are removed, cfqd_dead_key() is meaningless and cic->q can be used whereever cic->key is used. Kill cic->key. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- include/linux/iocontext.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h index 01e863128780..b2b75a54f252 100644 --- a/include/linux/iocontext.h +++ b/include/linux/iocontext.h @@ -20,7 +20,6 @@ enum { }; struct cfq_io_context { - void *key; struct request_queue *q; struct cfq_queue *cfqq[2]; -- cgit v1.2.3 From 22f746e235a5cbee2a6ca9887b1be2aa7d31fe71 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 14 Dec 2011 00:33:41 +0100 Subject: block: remove elevator_queue->ops elevator_queue->ops points to the same ops struct ->elevator_type.ops is pointing to. The only effect of caching it in elevator_queue is shorter notation - it doesn't save any indirect derefence. Relocate elevator_type->list which used only during module init/exit to the end of the structure, rename elevator_queue->elevator_type to ->type, and replace elevator_queue->ops with elevator_queue->type.ops. This doesn't introduce any functional difference. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- include/linux/elevator.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/elevator.h b/include/linux/elevator.h index 02604c89ddde..04958ef53e62 100644 --- a/include/linux/elevator.h +++ b/include/linux/elevator.h @@ -78,11 +78,11 @@ struct elv_fs_entry { */ struct elevator_type { - struct list_head list; struct elevator_ops ops; struct elv_fs_entry *elevator_attrs; char elevator_name[ELV_NAME_MAX]; struct module *elevator_owner; + struct list_head list; }; /* @@ -90,10 +90,9 @@ struct elevator_type */ struct elevator_queue { - struct elevator_ops *ops; + struct elevator_type *type; void *elevator_data; struct kobject kobj; - struct elevator_type *elevator_type; struct mutex sysfs_lock; struct hlist_head *hash; unsigned int registered:1; -- cgit v1.2.3 From c58698073218f2c8f2fc5982fa3938c2d3803b9f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 14 Dec 2011 00:33:41 +0100 Subject: block, cfq: reorganize cfq_io_context into generic and cfq specific parts Currently io_context and cfq logics are mixed without clear boundary. Most of io_context is independent from cfq but cfq_io_context handling logic is dispersed between generic ioc code and cfq. cfq_io_context represents association between an io_context and a request_queue, which is a concept useful outside of cfq, but it also contains fields which are useful only to cfq. This patch takes out generic part and put it into io_cq (io context-queue) and the rest into cfq_io_cq (cic moniker remains the same) which contains io_cq. The following changes are made together. * cfq_ttime and cfq_io_cq now live in cfq-iosched.c. * All related fields, functions and constants are renamed accordingly. * ioc->ioc_data is now "struct io_cq *" instead of "void *" and renamed to icq_hint. This prepares for io_context API cleanup. Documentation is currently sparse. It will be added later. Changes in this patch are mechanical and don't cause functional change. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- include/linux/iocontext.h | 43 ++++++++++++++----------------------------- 1 file changed, 14 insertions(+), 29 deletions(-) (limited to 'include/linux') diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h index b2b75a54f252..d15ca6591f96 100644 --- a/include/linux/iocontext.h +++ b/include/linux/iocontext.h @@ -5,38 +5,23 @@ #include #include -struct cfq_queue; -struct cfq_ttime { - unsigned long last_end_request; - - unsigned long ttime_total; - unsigned long ttime_samples; - unsigned long ttime_mean; -}; - enum { - CIC_IOPRIO_CHANGED, - CIC_CGROUP_CHANGED, + ICQ_IOPRIO_CHANGED, + ICQ_CGROUP_CHANGED, }; -struct cfq_io_context { - struct request_queue *q; - - struct cfq_queue *cfqq[2]; - - struct io_context *ioc; - - struct cfq_ttime ttime; - - struct list_head queue_list; - struct hlist_node cic_list; +struct io_cq { + struct request_queue *q; + struct io_context *ioc; - unsigned long changed; + struct list_head q_node; + struct hlist_node ioc_node; - void (*exit)(struct cfq_io_context *); - void (*release)(struct cfq_io_context *); + unsigned long changed; + struct rcu_head rcu_head; - struct rcu_head rcu_head; + void (*exit)(struct io_cq *); + void (*release)(struct io_cq *); }; /* @@ -58,9 +43,9 @@ struct io_context { int nr_batch_requests; /* Number of requests left in the batch */ unsigned long last_waited; /* Time last woken after wait for request */ - struct radix_tree_root radix_root; - struct hlist_head cic_list; - void __rcu *ioc_data; + struct radix_tree_root icq_tree; + struct io_cq __rcu *icq_hint; + struct hlist_head icq_list; struct work_struct release_work; }; -- cgit v1.2.3 From a612fddf0d8090f2877305c9168b6c1a34fb5d90 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 14 Dec 2011 00:33:41 +0100 Subject: block, cfq: move cfqd->icq_list to request_queue and add request->elv.icq Most of icq management is about to be moved out of cfq into blk-ioc. This patch prepares for it. * Move cfqd->icq_list to request_queue->icq_list * Make request explicitly point to icq instead of through elevator private data. ->elevator_private[3] is replaced with sub struct elv which contains icq pointer and priv[2]. cfq is updated accordingly. * Meaningless clearing of ->elevator_private[0] removed from elv_set_request(). At that point in code, the field was guaranteed to be %NULL anyway. This patch doesn't introduce any functional change. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 65c2f8c70089..8bca04873f53 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -111,10 +111,14 @@ struct request { * Three pointers are available for the IO schedulers, if they need * more they have to dynamically allocate it. Flush requests are * never put on the IO scheduler. So let the flush fields share - * space with the three elevator_private pointers. + * space with the elevator data. */ union { - void *elevator_private[3]; + struct { + struct io_cq *icq; + void *priv[2]; + } elv; + struct { unsigned int seq; struct list_head list; @@ -357,6 +361,8 @@ struct request_queue { struct timer_list timeout; struct list_head timeout_list; + struct list_head icq_list; + struct queue_limits limits; /* -- cgit v1.2.3 From 3d3c2379feb177a5fd55bb0ed76776dc9d4f3243 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 14 Dec 2011 00:33:42 +0100 Subject: block, cfq: move icq cache management to block core Let elevators set ->icq_size and ->icq_align in elevator_type and elv_register() and elv_unregister() respectively create and destroy kmem_cache for icq. * elv_register() now can return failure. All callers updated. * icq caches are automatically named "ELVNAME_io_cq". * cfq_slab_setup/kill() are collapsed into cfq_init/exit(). * While at it, minor indentation change for iosched_cfq.elevator_name for consistency. This will help moving icq management to block core. This doesn't introduce any functional change. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- include/linux/elevator.h | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/elevator.h b/include/linux/elevator.h index 04958ef53e62..d3d3e28cbfd4 100644 --- a/include/linux/elevator.h +++ b/include/linux/elevator.h @@ -78,10 +78,19 @@ struct elv_fs_entry { */ struct elevator_type { + /* managed by elevator core */ + struct kmem_cache *icq_cache; + + /* fields provided by elevator implementation */ struct elevator_ops ops; + size_t icq_size; + size_t icq_align; struct elv_fs_entry *elevator_attrs; char elevator_name[ELV_NAME_MAX]; struct module *elevator_owner; + + /* managed by elevator core */ + char icq_cache_name[ELV_NAME_MAX + 5]; /* elvname + "_io_cq" */ struct list_head list; }; @@ -127,7 +136,7 @@ extern void elv_drain_elevator(struct request_queue *); /* * io scheduler registration */ -extern void elv_register(struct elevator_type *); +extern int elv_register(struct elevator_type *); extern void elv_unregister(struct elevator_type *); /* -- cgit v1.2.3 From 7e5a8794492e43e9eebb68a98a23be055888ccd0 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 14 Dec 2011 00:33:42 +0100 Subject: block, cfq: move io_cq exit/release to blk-ioc.c With kmem_cache managed by blk-ioc, io_cq exit/release can be moved to blk-ioc too. The odd ->io_cq->exit/release() callbacks are replaced with elevator_ops->elevator_exit_icq_fn() with unlinking from both ioc and q, and freeing automatically handled by blk-ioc. The elevator operation only need to perform exit operation specific to the elevator - in cfq's case, exiting the cfqq's. Also, clearing of io_cq's on q detach is moved to block core and automatically performed on elevator switch and q release. Because the q io_cq points to might be freed before RCU callback for the io_cq runs, blk-ioc code should remember to which cache the io_cq needs to be freed when the io_cq is released. New field io_cq->__rcu_icq_cache is added for this purpose. As both the new field and rcu_head are used only after io_cq is released and the q/ioc_node fields aren't, they are put into unions. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- include/linux/elevator.h | 5 +++++ include/linux/iocontext.h | 20 ++++++++++++++------ 2 files changed, 19 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/elevator.h b/include/linux/elevator.h index d3d3e28cbfd4..06e4dd568717 100644 --- a/include/linux/elevator.h +++ b/include/linux/elevator.h @@ -5,6 +5,8 @@ #ifdef CONFIG_BLOCK +struct io_cq; + typedef int (elevator_merge_fn) (struct request_queue *, struct request **, struct bio *); @@ -24,6 +26,7 @@ typedef struct request *(elevator_request_list_fn) (struct request_queue *, stru typedef void (elevator_completed_req_fn) (struct request_queue *, struct request *); typedef int (elevator_may_queue_fn) (struct request_queue *, int); +typedef void (elevator_exit_icq_fn) (struct io_cq *); typedef int (elevator_set_req_fn) (struct request_queue *, struct request *, gfp_t); typedef void (elevator_put_req_fn) (struct request *); typedef void (elevator_activate_req_fn) (struct request_queue *, struct request *); @@ -56,6 +59,8 @@ struct elevator_ops elevator_request_list_fn *elevator_former_req_fn; elevator_request_list_fn *elevator_latter_req_fn; + elevator_exit_icq_fn *elevator_exit_icq_fn; + elevator_set_req_fn *elevator_set_req_fn; elevator_put_req_fn *elevator_put_req_fn; diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h index d15ca6591f96..ac390a34c0e7 100644 --- a/include/linux/iocontext.h +++ b/include/linux/iocontext.h @@ -14,14 +14,22 @@ struct io_cq { struct request_queue *q; struct io_context *ioc; - struct list_head q_node; - struct hlist_node ioc_node; + /* + * q_node and ioc_node link io_cq through icq_list of q and ioc + * respectively. Both fields are unused once ioc_exit_icq() is + * called and shared with __rcu_icq_cache and __rcu_head which are + * used for RCU free of io_cq. + */ + union { + struct list_head q_node; + struct kmem_cache *__rcu_icq_cache; + }; + union { + struct hlist_node ioc_node; + struct rcu_head __rcu_head; + }; unsigned long changed; - struct rcu_head rcu_head; - - void (*exit)(struct io_cq *); - void (*release)(struct io_cq *); }; /* -- cgit v1.2.3 From 9b84cacd013996f244d85b3d873287c2a8f88658 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 14 Dec 2011 00:33:42 +0100 Subject: block, cfq: restructure io_cq creation path for io_context interface cleanup Add elevator_ops->elevator_init_icq_fn() and restructure cfq_create_cic() and rename it to ioc_create_icq(). The new function expects its caller to pass in io_context, uses elevator_type->icq_cache, handles generic init, calls the new elevator operation for elevator specific initialization, and returns pointer to created or looked up icq. This leaves cfq_icq_pool variable without any user. Removed. This prepares for io_context interface cleanup and doesn't introduce any functional difference. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- include/linux/elevator.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/elevator.h b/include/linux/elevator.h index 06e4dd568717..c8f1e67a8ebe 100644 --- a/include/linux/elevator.h +++ b/include/linux/elevator.h @@ -26,6 +26,7 @@ typedef struct request *(elevator_request_list_fn) (struct request_queue *, stru typedef void (elevator_completed_req_fn) (struct request_queue *, struct request *); typedef int (elevator_may_queue_fn) (struct request_queue *, int); +typedef void (elevator_init_icq_fn) (struct io_cq *); typedef void (elevator_exit_icq_fn) (struct io_cq *); typedef int (elevator_set_req_fn) (struct request_queue *, struct request *, gfp_t); typedef void (elevator_put_req_fn) (struct request *); @@ -59,6 +60,7 @@ struct elevator_ops elevator_request_list_fn *elevator_former_req_fn; elevator_request_list_fn *elevator_latter_req_fn; + elevator_init_icq_fn *elevator_init_icq_fn; elevator_exit_icq_fn *elevator_exit_icq_fn; elevator_set_req_fn *elevator_set_req_fn; -- cgit v1.2.3 From f1f8cc94651738b418ba54c039df536303b91704 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 14 Dec 2011 00:33:42 +0100 Subject: block, cfq: move icq creation and rq->elv.icq association to block core Now block layer knows everything necessary to create and associate icq's with requests. Move ioc_create_icq() to blk-ioc.c and update get_request() such that, if elevator_type->icq_size is set, requests are automatically associated with their matching icq's before elv_set_request(). io_context reference is also managed by block core on request alloc/free. * Only ioprio/cgroup changed handling remains from cfq_get_cic(). Collapsed into cfq_set_request(). * This removes queue kicking on icq allocation failure (for now). As icq allocation failure is rare and the only effect of queue kicking achieved was possibily accelerating queue processing, this change shouldn't be noticeable. There is a larger underlying problem. Unlike request allocation, icq allocation is not guaranteed to succeed eventually after retries. The number of icq is unbound and thus mempool can't be the solution either. This effectively adds allocation dependency on memory free path and thus possibility of deadlock. This usually wouldn't happen because icq allocation is not a hot path and, even when the condition triggers, it's highly unlikely that none of the writeback workers already has icq. However, this is still possible especially if elevator is being switched under high memory pressure, so we better get it fixed. Probably the only solution is just bypassing elevator and appending to dispatch queue on any elevator allocation failure. * Comment added to explain how icq's are managed and synchronized. This completes cleanup of io_context interface. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- include/linux/elevator.h | 8 +++---- include/linux/iocontext.h | 59 +++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 63 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/elevator.h b/include/linux/elevator.h index c8f1e67a8ebe..c24f3d7fbf1e 100644 --- a/include/linux/elevator.h +++ b/include/linux/elevator.h @@ -60,8 +60,8 @@ struct elevator_ops elevator_request_list_fn *elevator_former_req_fn; elevator_request_list_fn *elevator_latter_req_fn; - elevator_init_icq_fn *elevator_init_icq_fn; - elevator_exit_icq_fn *elevator_exit_icq_fn; + elevator_init_icq_fn *elevator_init_icq_fn; /* see iocontext.h */ + elevator_exit_icq_fn *elevator_exit_icq_fn; /* ditto */ elevator_set_req_fn *elevator_set_req_fn; elevator_put_req_fn *elevator_put_req_fn; @@ -90,8 +90,8 @@ struct elevator_type /* fields provided by elevator implementation */ struct elevator_ops ops; - size_t icq_size; - size_t icq_align; + size_t icq_size; /* see iocontext.h */ + size_t icq_align; /* ditto */ struct elv_fs_entry *elevator_attrs; char elevator_name[ELV_NAME_MAX]; struct module *elevator_owner; diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h index ac390a34c0e7..7e1371c4bccf 100644 --- a/include/linux/iocontext.h +++ b/include/linux/iocontext.h @@ -10,6 +10,65 @@ enum { ICQ_CGROUP_CHANGED, }; +/* + * An io_cq (icq) is association between an io_context (ioc) and a + * request_queue (q). This is used by elevators which need to track + * information per ioc - q pair. + * + * Elevator can request use of icq by setting elevator_type->icq_size and + * ->icq_align. Both size and align must be larger than that of struct + * io_cq and elevator can use the tail area for private information. The + * recommended way to do this is defining a struct which contains io_cq as + * the first member followed by private members and using its size and + * align. For example, + * + * struct snail_io_cq { + * struct io_cq icq; + * int poke_snail; + * int feed_snail; + * }; + * + * struct elevator_type snail_elv_type { + * .ops = { ... }, + * .icq_size = sizeof(struct snail_io_cq), + * .icq_align = __alignof__(struct snail_io_cq), + * ... + * }; + * + * If icq_size is set, block core will manage icq's. All requests will + * have its ->elv.icq field set before elevator_ops->elevator_set_req_fn() + * is called and be holding a reference to the associated io_context. + * + * Whenever a new icq is created, elevator_ops->elevator_init_icq_fn() is + * called and, on destruction, ->elevator_exit_icq_fn(). Both functions + * are called with both the associated io_context and queue locks held. + * + * Elevator is allowed to lookup icq using ioc_lookup_icq() while holding + * queue lock but the returned icq is valid only until the queue lock is + * released. Elevators can not and should not try to create or destroy + * icq's. + * + * As icq's are linked from both ioc and q, the locking rules are a bit + * complex. + * + * - ioc lock nests inside q lock. + * + * - ioc->icq_list and icq->ioc_node are protected by ioc lock. + * q->icq_list and icq->q_node by q lock. + * + * - ioc->icq_tree and ioc->icq_hint are protected by ioc lock, while icq + * itself is protected by q lock. However, both the indexes and icq + * itself are also RCU managed and lookup can be performed holding only + * the q lock. + * + * - icq's are not reference counted. They are destroyed when either the + * ioc or q goes away. Each request with icq set holds an extra + * reference to ioc to ensure it stays until the request is completed. + * + * - Linking and unlinking icq's are performed while holding both ioc and q + * locks. Due to the lock ordering, q exit is simple but ioc exit + * requires reverse-order double lock dance. + */ struct io_cq { struct request_queue *q; struct io_context *ioc; -- cgit v1.2.3 From fb21c2f42879c05c76ea9e249b6905fc729f8529 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 13 Dec 2011 14:02:26 +0100 Subject: fbdev: Add FOURCC-based format configuration API This API will be used to support YUV frame buffer formats in a standard way. Last but not least, create a much needed fbdev API documentation and document the format setting APIs. Signed-off-by: Laurent Pinchart Signed-off-by: Florian Tobias Schandinat --- include/linux/fb.h | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fb.h b/include/linux/fb.h index 1d6836c498dd..c18122f40543 100644 --- a/include/linux/fb.h +++ b/include/linux/fb.h @@ -45,6 +45,7 @@ #define FB_TYPE_INTERLEAVED_PLANES 2 /* Interleaved planes */ #define FB_TYPE_TEXT 3 /* Text/attributes */ #define FB_TYPE_VGA_PLANES 4 /* EGA/VGA planes */ +#define FB_TYPE_FOURCC 5 /* Type identified by a V4L2 FOURCC */ #define FB_AUX_TEXT_MDA 0 /* Monochrome text */ #define FB_AUX_TEXT_CGA 1 /* CGA/EGA/VGA Color text */ @@ -69,6 +70,7 @@ #define FB_VISUAL_PSEUDOCOLOR 3 /* Pseudo color (like atari) */ #define FB_VISUAL_DIRECTCOLOR 4 /* Direct color */ #define FB_VISUAL_STATIC_PSEUDOCOLOR 5 /* Pseudo color readonly */ +#define FB_VISUAL_FOURCC 6 /* Visual identified by a V4L2 FOURCC */ #define FB_ACCEL_NONE 0 /* no hardware accelerator */ #define FB_ACCEL_ATARIBLITT 1 /* Atari Blitter */ @@ -154,6 +156,8 @@ #define FB_ACCEL_PUV3_UNIGFX 0xa0 /* PKUnity-v3 Unigfx */ +#define FB_CAP_FOURCC 1 /* Device supports FOURCC-based formats */ + struct fb_fix_screeninfo { char id[16]; /* identification string eg "TT Builtin" */ unsigned long smem_start; /* Start of frame buffer mem */ @@ -171,7 +175,8 @@ struct fb_fix_screeninfo { __u32 mmio_len; /* Length of Memory Mapped I/O */ __u32 accel; /* Indicate to driver which */ /* specific chip/card we have */ - __u16 reserved[3]; /* Reserved for future compatibility */ + __u16 capabilities; /* see FB_CAP_* */ + __u16 reserved[2]; /* Reserved for future compatibility */ }; /* Interpretation of offset for color fields: All offsets are from the right, @@ -246,8 +251,8 @@ struct fb_var_screeninfo { __u32 yoffset; /* resolution */ __u32 bits_per_pixel; /* guess what */ - __u32 grayscale; /* != 0 Graylevels instead of colors */ - + __u32 grayscale; /* 0 = color, 1 = grayscale, */ + /* >1 = FOURCC */ struct fb_bitfield red; /* bitfield in fb mem if true color, */ struct fb_bitfield green; /* else only length is significant */ struct fb_bitfield blue; @@ -273,7 +278,8 @@ struct fb_var_screeninfo { __u32 sync; /* see FB_SYNC_* */ __u32 vmode; /* see FB_VMODE_* */ __u32 rotate; /* angle we rotate counter clockwise */ - __u32 reserved[5]; /* Reserved for future compatibility */ + __u32 colorspace; /* colorspace for FOURCC-based modes */ + __u32 reserved[4]; /* Reserved for future compatibility */ }; struct fb_cmap { -- cgit v1.2.3 From 0b9eabd77f4867232a9ac6ca54fa39607b0c9bc7 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 13 Dec 2011 14:02:27 +0100 Subject: v4l: Add V4L2_PIX_FMT_NV24 and V4L2_PIX_FMT_NV42 formats NV24 and NV42 are planar YCbCr 4:4:4 and YCrCb 4:4:4 formats with a luma plane followed by an interleaved chroma plane. Signed-off-by: Laurent Pinchart Acked-by: Mauro Carvalho Chehab Signed-off-by: Florian Tobias Schandinat --- include/linux/videodev2.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 4b752d5ee80e..d2f74f8e3fe3 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -343,6 +343,8 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_NV21 v4l2_fourcc('N', 'V', '2', '1') /* 12 Y/CrCb 4:2:0 */ #define V4L2_PIX_FMT_NV16 v4l2_fourcc('N', 'V', '1', '6') /* 16 Y/CbCr 4:2:2 */ #define V4L2_PIX_FMT_NV61 v4l2_fourcc('N', 'V', '6', '1') /* 16 Y/CrCb 4:2:2 */ +#define V4L2_PIX_FMT_NV24 v4l2_fourcc('N', 'V', '2', '4') /* 24 Y/CbCr 4:4:4 */ +#define V4L2_PIX_FMT_NV42 v4l2_fourcc('N', 'V', '4', '2') /* 24 Y/CrCb 4:4:4 */ /* two non contiguous planes - one Y, one Cr + Cb interleaved */ #define V4L2_PIX_FMT_NV12M v4l2_fourcc('N', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 */ -- cgit v1.2.3 From a597fa78d374c57dcf9a9bac02472a530cd7e60a Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 10 Jun 2011 12:23:30 -0300 Subject: [media] v4l: Add over-current and indicator flash fault bits Flash controllers can report over-current and indicator fault conditions. Define flash fault control bits for them. Signed-off-by: Laurent Pinchart Acked-by: Andy Shevchenko Acked-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab --- include/linux/videodev2.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 4b752d5ee80e..3d62631839bc 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -1682,6 +1682,8 @@ enum v4l2_flash_strobe_source { #define V4L2_FLASH_FAULT_TIMEOUT (1 << 1) #define V4L2_FLASH_FAULT_OVER_TEMPERATURE (1 << 2) #define V4L2_FLASH_FAULT_SHORT_CIRCUIT (1 << 3) +#define V4L2_FLASH_FAULT_OVER_CURRENT (1 << 4) +#define V4L2_FLASH_FAULT_INDICATOR (1 << 5) #define V4L2_CID_FLASH_CHARGE (V4L2_CID_FLASH_CLASS_BASE + 11) #define V4L2_CID_FLASH_READY (V4L2_CID_FLASH_CLASS_BASE + 12) -- cgit v1.2.3 From bf3b84006e22ae241ec3d53dbe6c6d1f6ceddb56 Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Sat, 17 Dec 2011 20:36:55 -0300 Subject: [media] DVB: Use a unique delivery system identifier for DVBC_ANNEX_C Use a unique delivery system identifier for DVBC_ANNEX_C, just like any other. DVBC_ANNEX_A and DVBC_ANNEX_C have slightly different parameters and are used in 2 geographically different locations. Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- include/linux/dvb/frontend.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h index cb114f52ccf7..b2a939f8f1e2 100644 --- a/include/linux/dvb/frontend.h +++ b/include/linux/dvb/frontend.h @@ -337,7 +337,7 @@ typedef enum fe_rolloff { typedef enum fe_delivery_system { SYS_UNDEFINED, - SYS_DVBC_ANNEX_AC, + SYS_DVBC_ANNEX_A, SYS_DVBC_ANNEX_B, SYS_DVBT, SYS_DSS, @@ -354,8 +354,13 @@ typedef enum fe_delivery_system { SYS_DAB, SYS_DVBT2, SYS_TURBO, + SYS_DVBC_ANNEX_C, } fe_delivery_system_t; + +#define SYS_DVBC_ANNEX_AC SYS_DVBC_ANNEX_A + + struct dtv_cmds_h { char *name; /* A display name for debugging purposes */ -- cgit v1.2.3 From fd66c45dd51000ff444231a94ac15ccab8cffd3d Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 17 Dec 2011 20:36:57 -0300 Subject: [media] Remove Annex A/C selection via roll-off factor Instead of using a roll-off factor, change DRX-K & friends to select the bandwidth filter and the Nyquist half roll-off via delivery system. This provides a cleaner support for Annex A/C switch. Signed-off-by: Mauro Carvalho Chehab --- include/linux/dvb/frontend.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h index b2a939f8f1e2..a3c762383f88 100644 --- a/include/linux/dvb/frontend.h +++ b/include/linux/dvb/frontend.h @@ -331,8 +331,6 @@ typedef enum fe_rolloff { ROLLOFF_20, ROLLOFF_25, ROLLOFF_AUTO, - ROLLOFF_15, /* DVB-C Annex A */ - ROLLOFF_13, /* DVB-C Annex C */ } fe_rolloff_t; typedef enum fe_delivery_system { -- cgit v1.2.3 From 45959ee7aa645815a5ce303a0ea1e48a21e67c6a Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 Dec 2011 15:22:41 -0500 Subject: ftrace: Do not function trace inlined functions When gcc inlines a function, it does not mark it with the mcount prologue, which in turn means that inlined functions are not traced by the function tracer. But if CONFIG_OPTIMIZE_INLINING is set, then gcc is allowed not to inline a function that is marked inline. Depending on the options and the compiler, a function may or may not be traced by the function tracer, depending on whether gcc decides to inline a function or not. This has caused several problems in the pass becaues gcc is not always consistent with what it decides to inline between different gcc versions. Some places should not be traced (like paravirt native_* functions) and these are mostly marked as inline. When gcc decides not to inline the function, and if that function should not be traced, then the ftrace function tracer will suddenly break when it use to work fine. This becomes even harder to debug when different versions of gcc will not inline that function, making the same kernel and config work for some gcc versions and not work for others. By making all functions marked inline to not be traced will remove the ambiguity that gcc adds when it comes to tracing functions marked inline. All gcc versions will be consistent with what functions are traced and having volatile working code will be removed. Note, only the inline macro when CONFIG_OPTIMIZE_INLINING is set needs to have notrace added, as the attribute __always_inline will force the function to be inlined and then not traced. Signed-off-by: Steven Rostedt --- include/linux/compiler-gcc.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h index 59e4028e833d..3fd17c249221 100644 --- a/include/linux/compiler-gcc.h +++ b/include/linux/compiler-gcc.h @@ -50,6 +50,11 @@ # define inline inline __attribute__((always_inline)) # define __inline__ __inline__ __attribute__((always_inline)) # define __inline __inline __attribute__((always_inline)) +#else +/* A lot of inline functions can cause havoc with function tracing */ +# define inline inline notrace +# define __inline__ __inline__ notrace +# define __inline __inline notrace #endif #define __deprecated __attribute__((deprecated)) -- cgit v1.2.3 From c88fd8634ea68e74c7d19fd2621b4078fd22864c Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Tue, 16 Aug 2011 09:53:39 -0400 Subject: ftrace: Allow archs to modify code without stop machine The stop machine method to modify all functions in the kernel (some 20,000 of them) is the safest way to do so across all archs. But some archs may not need this big hammer approach to modify code on SMP machines, and can simply just update the code it needs. Adding a weak function arch_ftrace_update_code() that now does the stop machine, will also let any arch override this method. If the arch needs to check the system and then decide if it can avoid stop machine, it can still call ftrace_run_stop_machine() to use the old method. Signed-off-by: Steven Rostedt --- include/linux/ftrace.h | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index 26eafcef75be..4f0b6fec379d 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -133,6 +133,8 @@ struct ftrace_func_command { int ftrace_arch_code_modify_prepare(void); int ftrace_arch_code_modify_post_process(void); +void ftrace_bug(int err, unsigned long ip); + struct seq_file; struct ftrace_probe_ops { @@ -190,6 +192,35 @@ void ftrace_set_global_notrace(unsigned char *buf, int len, int reset); int register_ftrace_command(struct ftrace_func_command *cmd); int unregister_ftrace_command(struct ftrace_func_command *cmd); +enum { + FTRACE_UPDATE_CALLS = (1 << 0), + FTRACE_DISABLE_CALLS = (1 << 1), + FTRACE_UPDATE_TRACE_FUNC = (1 << 2), + FTRACE_START_FUNC_RET = (1 << 3), + FTRACE_STOP_FUNC_RET = (1 << 4), +}; + +enum { + FTRACE_UPDATE_IGNORE, + FTRACE_UPDATE_MAKE_CALL, + FTRACE_UPDATE_MAKE_NOP, +}; + +void arch_ftrace_update_code(int command); + +struct ftrace_rec_iter; + +struct ftrace_rec_iter *ftrace_rec_iter_start(void); +struct ftrace_rec_iter *ftrace_rec_iter_next(struct ftrace_rec_iter *iter); +struct dyn_ftrace *ftrace_rec_iter_record(struct ftrace_rec_iter *iter); + +int ftrace_update_record(struct dyn_ftrace *rec, int enable); +int ftrace_test_record(struct dyn_ftrace *rec, int enable); +void ftrace_run_stop_machine(int command); +int ftrace_location(unsigned long ip); + +extern ftrace_func_t ftrace_trace_function; + /* defined in arch */ extern int ftrace_ip_converted(unsigned long ip); extern int ftrace_dyn_arch_init(void *data); -- cgit v1.2.3 From 3208230983a0ee3d95be22d463257e530c684956 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 16 Dec 2011 14:42:37 -0500 Subject: ftrace: Remove usage of "freed" records Records that are added to the function trace table are permanently there, except for modules. By separating out the modules to their own pages that can be freed in one shot we can remove the "freed" flag and simplify some of the record management. Another benefit of doing this is that we can also move the records around; sort them. Signed-off-by: Steven Rostedt --- include/linux/ftrace.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index 4f0b6fec379d..3f79bc458bff 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -163,7 +163,6 @@ extern int ftrace_text_reserved(void *start, void *end); enum { FTRACE_FL_ENABLED = (1 << 30), - FTRACE_FL_FREE = (1 << 31), }; #define FTRACE_FL_MASK (0x3UL << 30) -- cgit v1.2.3 From 85ae32ae019bc1c2cc22e5f51fe0c9f2812ef68c Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 16 Dec 2011 16:30:31 -0500 Subject: ftrace: Replace record newlist with record page list As new functions come in to be initalized from mcount to nop, they are done by groups of pages. Whether it is the core kernel or a module. There's no need to keep track of these on a per record basis. At startup, and as any module is loaded, the functions to be traced are stored in a group of pages and added to the function list at the end. We just need to keep a pointer to the first page of the list that was added, and use that to know where to start on the list for initializing functions. Signed-off-by: Steven Rostedt --- include/linux/ftrace.h | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index 3f79bc458bff..31b9fd7aedcd 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -173,10 +173,7 @@ struct dyn_ftrace { unsigned long ip; /* address of mcount call-site */ struct dyn_ftrace *freelist; }; - union { - unsigned long flags; - struct dyn_ftrace *newlist; - }; + unsigned long flags; struct dyn_arch_ftrace arch; }; -- cgit v1.2.3 From fc13cb0ce45296f331263a6034aa1814203e1ac3 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 19 Dec 2011 14:41:25 -0500 Subject: ftrace: Allow other users of function tracing to use the output listing The function tracer is set up to allow any other subsystem (like perf) to use it. Ftrace already has a way to list what functions are enabled by the global_ops. It would be very helpful to let other users of the function tracer to be able to use the same code. Signed-off-by: Steven Rostedt --- include/linux/ftrace.h | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index 31b9fd7aedcd..aa7559f0a224 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -202,6 +202,14 @@ enum { FTRACE_UPDATE_MAKE_NOP, }; +enum { + FTRACE_ITER_FILTER = (1 << 0), + FTRACE_ITER_NOTRACE = (1 << 1), + FTRACE_ITER_PRINTALL = (1 << 2), + FTRACE_ITER_HASH = (1 << 3), + FTRACE_ITER_ENABLED = (1 << 4), +}; + void arch_ftrace_update_code(int command); struct ftrace_rec_iter; @@ -217,6 +225,15 @@ int ftrace_location(unsigned long ip); extern ftrace_func_t ftrace_trace_function; +int ftrace_regex_open(struct ftrace_ops *ops, int flag, + struct inode *inode, struct file *file); +ssize_t ftrace_filter_write(struct file *file, const char __user *ubuf, + size_t cnt, loff_t *ppos); +ssize_t ftrace_notrace_write(struct file *file, const char __user *ubuf, + size_t cnt, loff_t *ppos); +loff_t ftrace_regex_lseek(struct file *file, loff_t offset, int origin); +int ftrace_regex_release(struct inode *inode, struct file *file); + /* defined in arch */ extern int ftrace_ip_converted(unsigned long ip); extern int ftrace_dyn_arch_init(void *data); @@ -311,6 +328,24 @@ static inline int ftrace_text_reserved(void *start, void *end) { return 0; } + +/* + * Again users of functions that have ftrace_ops may not + * have them defined when ftrace is not enabled, but these + * functions may still be called. Use a macro instead of inline. + */ +#define ftrace_regex_open(ops, flag, inod, file) ({ -ENODEV; }) + +static inline ssize_t ftrace_filter_write(struct file *file, const char __user *ubuf, + size_t cnt, loff_t *ppos) { return -ENODEV; } +static inline ssize_t ftrace_notrace_write(struct file *file, const char __user *ubuf, + size_t cnt, loff_t *ppos) { return -ENODEV; } +static inline loff_t ftrace_regex_lseek(struct file *file, loff_t offset, int origin) +{ + return -ENODEV; +} +static inline int +ftrace_regex_release(struct inode *inode, struct file *file) { return -ENODEV; } #endif /* CONFIG_DYNAMIC_FTRACE */ /* totally disable ftrace - can not re-enable after this */ -- cgit v1.2.3 From 69a3083c4a7df0322d97bb2b43a33cb12af8131a Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 19 Dec 2011 15:21:16 -0500 Subject: ftrace: Decouple hash items from showing filtered functions The set_ftrace_filter shows "hashed" functions, which are functions that are added with operations to them (like traceon and traceoff). As other subsystems may be able to show what functions they are using for function tracing, the hash items should no longer be shown just because the FILTER flag is set. As they have nothing to do with other subsystems filters. Signed-off-by: Steven Rostedt --- include/linux/ftrace.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index aa7559f0a224..d1ff0de18970 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -206,8 +206,9 @@ enum { FTRACE_ITER_FILTER = (1 << 0), FTRACE_ITER_NOTRACE = (1 << 1), FTRACE_ITER_PRINTALL = (1 << 2), - FTRACE_ITER_HASH = (1 << 3), - FTRACE_ITER_ENABLED = (1 << 4), + FTRACE_ITER_DO_HASH = (1 << 3), + FTRACE_ITER_HASH = (1 << 4), + FTRACE_ITER_ENABLED = (1 << 5), }; void arch_ftrace_update_code(int command); -- cgit v1.2.3 From 2a85a37f168d2b4d74d493b578af4dc9032be92e Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 19 Dec 2011 21:57:44 -0500 Subject: ftrace: Allow access to the boot time function enabling Change set_ftrace_early_filter() to ftrace_set_early_filter() and make it a global function. This will allow other subsystems in the kernel to be able to enable function tracing at start up and reuse the ftrace function parsing code. Signed-off-by: Steven Rostedt --- include/linux/ftrace.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index d1ff0de18970..41df6f501656 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -235,6 +235,9 @@ ssize_t ftrace_notrace_write(struct file *file, const char __user *ubuf, loff_t ftrace_regex_lseek(struct file *file, loff_t offset, int origin); int ftrace_regex_release(struct inode *inode, struct file *file); +void __init +ftrace_set_early_filter(struct ftrace_ops *ops, char *buf, int enable); + /* defined in arch */ extern int ftrace_ip_converted(unsigned long ip); extern int ftrace_dyn_arch_init(void *data); -- cgit v1.2.3 From 62268ce9170c5466332c046ff6ddafcb67751502 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Tue, 13 Dec 2011 23:48:03 +0800 Subject: dmaengine: add DMA_TRANS_NONE to dma_transfer_direction MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Before dma_transfer_direction was introduced to replace dma_data_direction, some dmaengine device uses DMA_NONE of dma_data_direction for some talk with its client drivers. The mxs-dma and its clients mxs-mmc and gpmi-nand are such case. This patch adds DMA_TRANS_NONE to dma_transfer_direction and migrate the DMA_NONE use in mxs-dma to it. It also fixes the compile warning below. CC drivers/dma/mxs-dma.o drivers/dma/mxs-dma.c: In function ‘mxs_dma_prep_slave_sg’: drivers/dma/mxs-dma.c:420:16: warning: comparison between ‘enum dma_transfer_direction’ and ‘enum dma_data_direction’ Signed-off-by: Shawn Guo Signed-off-by: Vinod Koul --- include/linux/dmaengine.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 5532bb8b500c..679b349d9b66 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -88,6 +88,7 @@ enum dma_transfer_direction { DMA_MEM_TO_DEV, DMA_DEV_TO_MEM, DMA_DEV_TO_DEV, + DMA_TRANS_NONE, }; /** -- cgit v1.2.3 From 4e82786f7039cb707c031dcf0dc84c025e149487 Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Tue, 13 Dec 2011 23:48:05 +0800 Subject: mtd: fix compile error for gpmi-nand The driver gpmi-nand should compile at least. This patch adds the missing gpmi-nand.h to fix the compile error below. CC drivers/mtd/nand/gpmi-nand/gpmi-nand.o CC drivers/mtd/nand/gpmi-nand/gpmi-lib.o drivers/mtd/nand/gpmi-nand/gpmi-nand.c:25:33: fatal error: linux/mtd/gpmi-nand.h: No such file or directory drivers/mtd/nand/gpmi-nand/gpmi-lib.c:21:33: fatal error: linux/mtd/gpmi-nand.h: No such file or directory This header is grabbed from patch below, which has not been postponed for merging. [PATCH v8 1/4] ARM: mxs: add GPMI-NAND support for imx23/imx28 http://permalink.gmane.org/gmane.linux.drivers.mtd/37338 Signed-off-by: Huang Shijie Signed-off-by: Shawn Guo Signed-off-by: Vinod Koul --- include/linux/mtd/gpmi-nand.h | 68 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 68 insertions(+) create mode 100644 include/linux/mtd/gpmi-nand.h (limited to 'include/linux') diff --git a/include/linux/mtd/gpmi-nand.h b/include/linux/mtd/gpmi-nand.h new file mode 100644 index 000000000000..69b6dbf46b5e --- /dev/null +++ b/include/linux/mtd/gpmi-nand.h @@ -0,0 +1,68 @@ +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef __MACH_MXS_GPMI_NAND_H__ +#define __MACH_MXS_GPMI_NAND_H__ + +/* The size of the resources is fixed. */ +#define GPMI_NAND_RES_SIZE 6 + +/* Resource names for the GPMI NAND driver. */ +#define GPMI_NAND_GPMI_REGS_ADDR_RES_NAME "GPMI NAND GPMI Registers" +#define GPMI_NAND_GPMI_INTERRUPT_RES_NAME "GPMI NAND GPMI Interrupt" +#define GPMI_NAND_BCH_REGS_ADDR_RES_NAME "GPMI NAND BCH Registers" +#define GPMI_NAND_BCH_INTERRUPT_RES_NAME "GPMI NAND BCH Interrupt" +#define GPMI_NAND_DMA_CHANNELS_RES_NAME "GPMI NAND DMA Channels" +#define GPMI_NAND_DMA_INTERRUPT_RES_NAME "GPMI NAND DMA Interrupt" + +/** + * struct gpmi_nand_platform_data - GPMI NAND driver platform data. + * + * This structure communicates platform-specific information to the GPMI NAND + * driver that can't be expressed as resources. + * + * @platform_init: A pointer to a function the driver will call to + * initialize the platform (e.g., set up the pin mux). + * @min_prop_delay_in_ns: Minimum propagation delay of GPMI signals to and + * from the NAND Flash device, in nanoseconds. + * @max_prop_delay_in_ns: Maximum propagation delay of GPMI signals to and + * from the NAND Flash device, in nanoseconds. + * @max_chip_count: The maximum number of chips for which the driver + * should configure the hardware. This value most + * likely reflects the number of pins that are + * connected to a NAND Flash device. If this is + * greater than the SoC hardware can support, the + * driver will print a message and fail to initialize. + * @partitions: An optional pointer to an array of partition + * descriptions. + * @partition_count: The number of elements in the partitions array. + */ +struct gpmi_nand_platform_data { + /* SoC hardware information. */ + int (*platform_init)(void); + + /* NAND Flash information. */ + unsigned int min_prop_delay_in_ns; + unsigned int max_prop_delay_in_ns; + unsigned int max_chip_count; + + /* Medium information. */ + struct mtd_partition *partitions; + unsigned partition_count; +}; +#endif -- cgit v1.2.3 From cc1d327232759647ea56725eab1c6b16c92d52fa Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Mon, 14 Nov 2011 08:48:18 -0300 Subject: [media] v4l: Add new alpha component control The V4L2_CID_ALPHA_COMPONENT control is intended for the video capture or memory-to-memory devices that are capable of setting up the per-pixel alpha component to some arbitrary value. It allows to set the alpha component for all pixels to an arbitrary value. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Acked-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- include/linux/videodev2.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 3d62631839bc..2965906a02c9 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -1204,10 +1204,10 @@ enum v4l2_colorfx { #define V4L2_CID_MIN_BUFFERS_FOR_CAPTURE (V4L2_CID_BASE+39) #define V4L2_CID_MIN_BUFFERS_FOR_OUTPUT (V4L2_CID_BASE+40) -/* last CID + 1 */ -#define V4L2_CID_LASTP1 (V4L2_CID_BASE+41) +#define V4L2_CID_ALPHA_COMPONENT (V4L2_CID_BASE+41) -/* Minimum number of buffer neede by the device */ +/* last CID + 1 */ +#define V4L2_CID_LASTP1 (V4L2_CID_BASE+42) /* MPEG-class control IDs defined by V4L2 */ #define V4L2_CID_MPEG_BASE (V4L2_CTRL_CLASS_MPEG | 0x900) -- cgit v1.2.3 From 8de8594a79ae43b08d115c94f09373f6c673f202 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 26 Dec 2011 20:22:50 -0300 Subject: [media] dvb-core: be sure that drivers won't use DVBv3 internally Now that all frontends are implementing DVBv5, don't export the DVBv3 specific stuff to the drivers. Only the core should be aware of that, as it will keep providing DVBv3 backward compatibility. Signed-off-by: Mauro Carvalho Chehab --- include/linux/dvb/frontend.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h index a3c762383f88..7e7cb64f56d8 100644 --- a/include/linux/dvb/frontend.h +++ b/include/linux/dvb/frontend.h @@ -181,6 +181,7 @@ typedef enum fe_transmit_mode { TRANSMISSION_MODE_32K, } fe_transmit_mode_t; +#if defined(__DVB_CORE__) || !defined (__KERNEL__) typedef enum fe_bandwidth { BANDWIDTH_8_MHZ, BANDWIDTH_7_MHZ, @@ -190,7 +191,7 @@ typedef enum fe_bandwidth { BANDWIDTH_10_MHZ, BANDWIDTH_1_712_MHZ, } fe_bandwidth_t; - +#endif typedef enum fe_guard_interval { GUARD_INTERVAL_1_32, @@ -213,6 +214,7 @@ typedef enum fe_hierarchy { } fe_hierarchy_t; +#if defined(__DVB_CORE__) || !defined (__KERNEL__) struct dvb_qpsk_parameters { __u32 symbol_rate; /* symbol rate in Symbols per second */ fe_code_rate_t fec_inner; /* forward error correction (see above) */ @@ -251,11 +253,11 @@ struct dvb_frontend_parameters { } u; }; - struct dvb_frontend_event { fe_status_t status; struct dvb_frontend_parameters parameters; }; +#endif /* S2API Commands */ #define DTV_UNDEFINED 0 -- cgit v1.2.3 From f2ab2ba09e081fbce068c0adc205ad3f25a3b626 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Fri, 9 Dec 2011 14:11:41 -0600 Subject: gpio: pl061: convert to use 0 for no irq We don't want drivers using NO_IRQ, so remove its use. For now, 0 or -1 means no irq until platforms are converted to use 0. Signed-off-by: Rob Herring Acked-by: Grant Likely Cc: Linus Walleij --- include/linux/amba/pl061.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/amba/pl061.h b/include/linux/amba/pl061.h index 2412af944f1f..fb83c0453489 100644 --- a/include/linux/amba/pl061.h +++ b/include/linux/amba/pl061.h @@ -7,7 +7,7 @@ struct pl061_platform_data { unsigned gpio_base; /* number of the first IRQ. - * If the IRQ functionality in not desired this must be set to NO_IRQ. + * If the IRQ functionality in not desired this must be set to 0. */ unsigned irq_base; -- cgit v1.2.3 From cd7d494d0b23673215330963c28138dd0c3fd405 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 1 Jan 2012 16:11:17 -0300 Subject: [media] dvb: deprecate the usage of ops->info.type Mark info.type as deprecated inside the header, recommending the usage of DTV_ENUM_DELSYS DVBv5 command instead. Signed-off-by: Mauro Carvalho Chehab --- include/linux/dvb/frontend.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h index 7e7cb64f56d8..cb4428ab81ed 100644 --- a/include/linux/dvb/frontend.h +++ b/include/linux/dvb/frontend.h @@ -72,7 +72,7 @@ typedef enum fe_caps { struct dvb_frontend_info { char name[128]; - fe_type_t type; + fe_type_t type; /* DEPRECATED. Use DTV_ENUM_DELSYS instead */ __u32 frequency_min; __u32 frequency_max; __u32 frequency_stepsize; -- cgit v1.2.3 From 6a9de49115d5ff9871d953af1a5c8249e1585731 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Tue, 3 Jan 2012 12:25:14 -0500 Subject: capabilities: remove the task from capable LSM hook entirely The capabilities framework is based around credentials, not necessarily the current task. Yet we still passed the current task down into LSMs from the security_capable() LSM hook as if it was a meaningful portion of the security decision. This patch removes the 'generic' passing of current and instead forces individual LSMs to use current explicitly if they think it is appropriate. In our case those LSMs are SELinux and AppArmor. I believe the AppArmor use of current is incorrect, but that is wholely unrelated to this patch. This patch does not change what AppArmor does, it just makes it clear in the AppArmor code that it is doing it. The SELinux code still uses current in it's audit message, which may also be wrong and needs further investigation. Again this is NOT a change, it may have always been wrong, this patch just makes it clear what is happening. Signed-off-by: Eric Paris --- include/linux/security.h | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) (limited to 'include/linux') diff --git a/include/linux/security.h b/include/linux/security.h index ebd2a53a3d07..4921163b2752 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -53,8 +53,8 @@ struct user_namespace; * These functions are in security/capability.c and are used * as the default capabilities functions */ -extern int cap_capable(struct task_struct *tsk, const struct cred *cred, - struct user_namespace *ns, int cap, int audit); +extern int cap_capable(const struct cred *cred, struct user_namespace *ns, + int cap, int audit); extern int cap_settime(const struct timespec *ts, const struct timezone *tz); extern int cap_ptrace_access_check(struct task_struct *child, unsigned int mode); extern int cap_ptrace_traceme(struct task_struct *parent); @@ -1261,7 +1261,6 @@ static inline void security_free_mnt_opts(struct security_mnt_opts *opts) * @capable: * Check whether the @tsk process has the @cap capability in the indicated * credentials. - * @tsk contains the task_struct for the process. * @cred contains the credentials to use. * @ns contains the user namespace we want the capability in * @cap contains the capability . @@ -1385,8 +1384,8 @@ struct security_operations { const kernel_cap_t *effective, const kernel_cap_t *inheritable, const kernel_cap_t *permitted); - int (*capable) (struct task_struct *tsk, const struct cred *cred, - struct user_namespace *ns, int cap, int audit); + int (*capable) (const struct cred *cred, struct user_namespace *ns, + int cap, int audit); int (*quotactl) (int cmds, int type, int id, struct super_block *sb); int (*quota_on) (struct dentry *dentry); int (*syslog) (int type); @@ -1867,7 +1866,7 @@ static inline int security_capset(struct cred *new, static inline int security_capable(struct user_namespace *ns, const struct cred *cred, int cap) { - return cap_capable(current, cred, ns, cap, SECURITY_CAP_AUDIT); + return cap_capable(cred, ns, cap, SECURITY_CAP_AUDIT); } static inline int security_real_capable(struct task_struct *tsk, struct user_namespace *ns, int cap) @@ -1875,7 +1874,7 @@ static inline int security_real_capable(struct task_struct *tsk, struct user_nam int ret; rcu_read_lock(); - ret = cap_capable(tsk, __task_cred(tsk), ns, cap, SECURITY_CAP_AUDIT); + ret = cap_capable(__task_cred(tsk), ns, cap, SECURITY_CAP_AUDIT); rcu_read_unlock(); return ret; } @@ -1886,8 +1885,7 @@ int security_real_capable_noaudit(struct task_struct *tsk, struct user_namespace int ret; rcu_read_lock(); - ret = cap_capable(tsk, __task_cred(tsk), ns, cap, - SECURITY_CAP_NOAUDIT); + ret = cap_capable(__task_cred(tsk), ns, cap, SECURITY_CAP_NOAUDIT); rcu_read_unlock(); return ret; } -- cgit v1.2.3 From b7e724d303b684655e4ca3dabd5a6840ad19012d Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Tue, 3 Jan 2012 12:25:15 -0500 Subject: capabilities: reverse arguments to security_capable security_capable takes ns, cred, cap. But the LSM capable() hook takes cred, ns, cap. The capability helper functions also take cred, ns, cap. Rather than flip argument order just to flip it back, leave them alone. Heck, this should be a little faster since argument will be in the right place! Signed-off-by: Eric Paris --- include/linux/security.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/security.h b/include/linux/security.h index 4921163b2752..ee969ff40a26 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -1666,7 +1666,7 @@ int security_capset(struct cred *new, const struct cred *old, const kernel_cap_t *effective, const kernel_cap_t *inheritable, const kernel_cap_t *permitted); -int security_capable(struct user_namespace *ns, const struct cred *cred, +int security_capable(const struct cred *cred, struct user_namespace *ns, int cap); int security_real_capable(struct task_struct *tsk, struct user_namespace *ns, int cap); @@ -1863,8 +1863,8 @@ static inline int security_capset(struct cred *new, return cap_capset(new, old, effective, inheritable, permitted); } -static inline int security_capable(struct user_namespace *ns, - const struct cred *cred, int cap) +static inline int security_capable(const struct cred *cred, + struct user_namespace *ns, int cap) { return cap_capable(cred, ns, cap, SECURITY_CAP_AUDIT); } -- cgit v1.2.3 From c7eba4a97563fd8b431787f7ad623444f2da80c6 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Tue, 3 Jan 2012 12:25:15 -0500 Subject: capabilities: introduce security_capable_noaudit Exactly like security_capable except don't audit any denials. This is for places where the kernel may make decisions about what to do if a task has a given capability, but which failing that capability is not a sign of a security policy violation. An example is checking if a task has CAP_SYS_ADMIN to lower it's likelyhood of being killed by the oom killer. This check is not a security violation if it is denied. Signed-off-by: Eric Paris Acked-by: Serge E. Hallyn --- include/linux/security.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/security.h b/include/linux/security.h index ee969ff40a26..caff54eee686 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -1668,6 +1668,8 @@ int security_capset(struct cred *new, const struct cred *old, const kernel_cap_t *permitted); int security_capable(const struct cred *cred, struct user_namespace *ns, int cap); +int security_capable_noaudit(const struct cred *cred, struct user_namespace *ns, + int cap); int security_real_capable(struct task_struct *tsk, struct user_namespace *ns, int cap); int security_real_capable_noaudit(struct task_struct *tsk, @@ -1869,6 +1871,11 @@ static inline int security_capable(const struct cred *cred, return cap_capable(cred, ns, cap, SECURITY_CAP_AUDIT); } +static inline int security_capable_noaudit(const struct cred *cred, + struct user_namespace *ns, int cap) { + return cap_capable(cred, ns, cap, SECURITY_CAP_NOAUDIT); +} + static inline int security_real_capable(struct task_struct *tsk, struct user_namespace *ns, int cap) { int ret; -- cgit v1.2.3 From 2920a8409de5a51575d03deca07e5bb2be6fc98d Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Tue, 3 Jan 2012 12:25:15 -0500 Subject: capabilities: remove all _real_ interfaces The name security_real_capable and security_real_capable_noaudit just don't make much sense to me. Convert them to use security_capable and security_capable_noaudit. Signed-off-by: Eric Paris Acked-by: Serge E. Hallyn --- include/linux/security.h | 25 ------------------------- 1 file changed, 25 deletions(-) (limited to 'include/linux') diff --git a/include/linux/security.h b/include/linux/security.h index caff54eee686..e345a9313a60 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -1670,10 +1670,6 @@ int security_capable(const struct cred *cred, struct user_namespace *ns, int cap); int security_capable_noaudit(const struct cred *cred, struct user_namespace *ns, int cap); -int security_real_capable(struct task_struct *tsk, struct user_namespace *ns, - int cap); -int security_real_capable_noaudit(struct task_struct *tsk, - struct user_namespace *ns, int cap); int security_quotactl(int cmds, int type, int id, struct super_block *sb); int security_quota_on(struct dentry *dentry); int security_syslog(int type); @@ -1876,27 +1872,6 @@ static inline int security_capable_noaudit(const struct cred *cred, return cap_capable(cred, ns, cap, SECURITY_CAP_NOAUDIT); } -static inline int security_real_capable(struct task_struct *tsk, struct user_namespace *ns, int cap) -{ - int ret; - - rcu_read_lock(); - ret = cap_capable(__task_cred(tsk), ns, cap, SECURITY_CAP_AUDIT); - rcu_read_unlock(); - return ret; -} - -static inline -int security_real_capable_noaudit(struct task_struct *tsk, struct user_namespace *ns, int cap) -{ - int ret; - - rcu_read_lock(); - ret = cap_capable(__task_cred(tsk), ns, cap, SECURITY_CAP_NOAUDIT); - rcu_read_unlock(); - return ret; -} - static inline int security_quotactl(int cmds, int type, int id, struct super_block *sb) { -- cgit v1.2.3 From 7b61d648499e74dbec3d4ce645675e0ae040ae78 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Tue, 3 Jan 2012 12:25:15 -0500 Subject: capabilites: introduce new has_ns_capabilities_noaudit For consistency in interfaces, introduce a new interface called has_ns_capabilities_noaudit. It checks if the given task has the given capability in the given namespace. Use this new function by has_capabilities_noaudit. Signed-off-by: Eric Paris Acked-by: Serge E. Hallyn --- include/linux/capability.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/capability.h b/include/linux/capability.h index c42112350003..63f59fa8769d 100644 --- a/include/linux/capability.h +++ b/include/linux/capability.h @@ -543,6 +543,8 @@ extern bool has_capability(struct task_struct *t, int cap); extern bool has_ns_capability(struct task_struct *t, struct user_namespace *ns, int cap); extern bool has_capability_noaudit(struct task_struct *t, int cap); +extern bool has_ns_capability_noaudit(struct task_struct *t, + struct user_namespace *ns, int cap); extern bool capable(int cap); extern bool ns_capable(struct user_namespace *ns, int cap); extern bool task_ns_capable(struct task_struct *t, int cap); -- cgit v1.2.3 From f1c84dae0ecc51aa35c81f19a0ebcd6c0921ddcb Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Tue, 3 Jan 2012 12:25:15 -0500 Subject: capabilities: remove task_ns_* functions task_ in the front of a function, in the security subsystem anyway, means to me at least, that we are operating with that task as the subject of the security decision. In this case what it means is that we are using current as the subject but we use the task to get the right namespace. Who in the world would ever realize that's what task_ns_capability means just by the name? This patch eliminates the task_ns functions entirely and uses the has_ns_capability function instead. This means we explicitly open code the ns in question in the caller. I think it makes the caller a LOT more clear what is going on. Signed-off-by: Eric Paris Acked-by: Serge E. Hallyn --- include/linux/capability.h | 1 - include/linux/cred.h | 6 ++++-- 2 files changed, 4 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/capability.h b/include/linux/capability.h index 63f59fa8769d..e3e8d9cb9b08 100644 --- a/include/linux/capability.h +++ b/include/linux/capability.h @@ -547,7 +547,6 @@ extern bool has_ns_capability_noaudit(struct task_struct *t, struct user_namespace *ns, int cap); extern bool capable(int cap); extern bool ns_capable(struct user_namespace *ns, int cap); -extern bool task_ns_capable(struct task_struct *t, int cap); extern bool nsown_capable(int cap); /* audit system wants to get cap info from files as well */ diff --git a/include/linux/cred.h b/include/linux/cred.h index 40308969ed00..adadf71a7327 100644 --- a/include/linux/cred.h +++ b/include/linux/cred.h @@ -358,10 +358,12 @@ static inline void put_cred(const struct cred *_cred) #define current_security() (current_cred_xxx(security)) #ifdef CONFIG_USER_NS -#define current_user_ns() (current_cred_xxx(user_ns)) +#define current_user_ns() (current_cred_xxx(user_ns)) +#define task_user_ns(task) (task_cred_xxx((task), user_ns)) #else extern struct user_namespace init_user_ns; -#define current_user_ns() (&init_user_ns) +#define current_user_ns() (&init_user_ns) +#define task_user_ns(task) (&init_user_ns) #endif -- cgit v1.2.3 From 69f594a38967f4540ce7a29b3fd214e68a8330bd Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Tue, 3 Jan 2012 12:25:15 -0500 Subject: ptrace: do not audit capability check when outputing /proc/pid/stat Reading /proc/pid/stat of another process checks if one has ptrace permissions on that process. If one does have permissions it outputs some data about the process which might have security and attack implications. If the current task does not have ptrace permissions the read still works, but those fields are filled with inocuous (0) values. Since this check and a subsequent denial is not a violation of the security policy we should not audit such denials. This can be quite useful to removing ptrace broadly across a system without flooding the logs when ps is run or something which harmlessly walks proc. Signed-off-by: Eric Paris Acked-by: Serge E. Hallyn --- include/linux/ptrace.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h index 800f113bea66..a27e56ca41a4 100644 --- a/include/linux/ptrace.h +++ b/include/linux/ptrace.h @@ -127,8 +127,9 @@ extern void __ptrace_link(struct task_struct *child, struct task_struct *new_parent); extern void __ptrace_unlink(struct task_struct *child); extern void exit_ptrace(struct task_struct *tracer); -#define PTRACE_MODE_READ 1 -#define PTRACE_MODE_ATTACH 2 +#define PTRACE_MODE_READ 0x01 +#define PTRACE_MODE_ATTACH 0x02 +#define PTRACE_MODE_NOAUDIT 0x04 /* Returns 0 on success, -errno on denial. */ extern int __ptrace_may_access(struct task_struct *task, unsigned int mode); /* Returns true on success, false on denial. */ -- cgit v1.2.3 From fd778461524849afd035679030ae8e8873c72b81 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Tue, 3 Jan 2012 12:25:16 -0500 Subject: security: remove the security_netlink_recv hook as it is equivalent to capable() Once upon a time netlink was not sync and we had to get the effective capabilities from the skb that was being received. Today we instead get the capabilities from the current task. This has rendered the entire purpose of the hook moot as it is now functionally equivalent to the capable() call. Signed-off-by: Eric Paris --- include/linux/security.h | 14 -------------- 1 file changed, 14 deletions(-) (limited to 'include/linux') diff --git a/include/linux/security.h b/include/linux/security.h index e345a9313a60..ba2d531c123f 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -95,7 +95,6 @@ struct xfrm_user_sec_ctx; struct seq_file; extern int cap_netlink_send(struct sock *sk, struct sk_buff *skb); -extern int cap_netlink_recv(struct sk_buff *skb, int cap); void reset_security_ops(void); @@ -792,12 +791,6 @@ static inline void security_free_mnt_opts(struct security_mnt_opts *opts) * @skb contains the sk_buff structure for the netlink message. * Return 0 if the information was successfully saved and message * is allowed to be transmitted. - * @netlink_recv: - * Check permission before processing the received netlink message in - * @skb. - * @skb contains the sk_buff structure for the netlink message. - * @cap indicates the capability required - * Return 0 if permission is granted. * * Security hooks for Unix domain networking. * @@ -1556,7 +1549,6 @@ struct security_operations { struct sembuf *sops, unsigned nsops, int alter); int (*netlink_send) (struct sock *sk, struct sk_buff *skb); - int (*netlink_recv) (struct sk_buff *skb, int cap); void (*d_instantiate) (struct dentry *dentry, struct inode *inode); @@ -1803,7 +1795,6 @@ void security_d_instantiate(struct dentry *dentry, struct inode *inode); int security_getprocattr(struct task_struct *p, char *name, char **value); int security_setprocattr(struct task_struct *p, char *name, void *value, size_t size); int security_netlink_send(struct sock *sk, struct sk_buff *skb); -int security_netlink_recv(struct sk_buff *skb, int cap); int security_secid_to_secctx(u32 secid, char **secdata, u32 *seclen); int security_secctx_to_secid(const char *secdata, u32 seclen, u32 *secid); void security_release_secctx(char *secdata, u32 seclen); @@ -2478,11 +2469,6 @@ static inline int security_netlink_send(struct sock *sk, struct sk_buff *skb) return cap_netlink_send(sk, skb); } -static inline int security_netlink_recv(struct sk_buff *skb, int cap) -{ - return cap_netlink_recv(skb, cap); -} - static inline int security_secid_to_secctx(u32 secid, char **secdata, u32 *seclen) { return -EOPNOTSUPP; -- cgit v1.2.3 From f423e5ba76e7e4a6fcb4836b4f072d1fdebba8b5 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Tue, 3 Jan 2012 12:25:16 -0500 Subject: capabilities: remove __cap_full_set definition In 5163b583a036b103c3cec7171d6731c125773ed6 I removed __cap_full_set but forgot to remove it from a header. Do that. Reported-by: Kornilios Kourtis Signed-off-by: Eric Paris --- include/linux/capability.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/capability.h b/include/linux/capability.h index e3e8d9cb9b08..d527b2880331 100644 --- a/include/linux/capability.h +++ b/include/linux/capability.h @@ -379,7 +379,6 @@ struct user_namespace; struct user_namespace *current_user_ns(void); extern const kernel_cap_t __cap_empty_set; -extern const kernel_cap_t __cap_full_set; extern const kernel_cap_t __cap_init_eff_set; /* -- cgit v1.2.3 From c11b46c32c8a9bf05fdb76d70d8dc74fcbfd02d1 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 4 Jan 2012 15:34:17 +0100 Subject: dma: shdma: fix runtime PM: clear channel buffers on reset On platforms, supporting power domains, if the domain, containing a DMAC instance is powered down, the driver fails to resume correctly. On those platforms DMAC channels have an additional CHCLR register for clearing channel buffers. Using this register during runtime resume fixes the problem. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Vinod Koul --- include/linux/sh_dma.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/sh_dma.h b/include/linux/sh_dma.h index 62ef6938da10..8cd7fe59cf1a 100644 --- a/include/linux/sh_dma.h +++ b/include/linux/sh_dma.h @@ -48,6 +48,7 @@ struct sh_dmae_channel { unsigned int offset; unsigned int dmars; unsigned int dmars_bit; + unsigned int chclr_offset; }; struct sh_dmae_pdata { @@ -68,6 +69,7 @@ struct sh_dmae_pdata { unsigned int dmaor_is_32bit:1; unsigned int needs_tend_set:1; unsigned int no_dmars:1; + unsigned int chclr_present:1; }; /* DMA register */ -- cgit v1.2.3 From fe3449a4aa4e62404cc1c57c945fd56152b2f877 Mon Sep 17 00:00:00 2001 From: Theodore Kilgore Date: Tue, 13 Dec 2011 18:09:15 -0300 Subject: [media] gspca: Add jl2005bcd sub driver Written by Theodore Kilgore With minor changes by Hans de Goede: -Code style fixes -Correct the verbose level on various PDEBUG messages -Make error messages use pr_err instead of PDEBUG -Document the jl20 pixel format Signed-off-by: Theodore Kilgore Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- include/linux/videodev2.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 2965906a02c9..6bfaa767a817 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -401,6 +401,7 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_SPCA561 v4l2_fourcc('S', '5', '6', '1') /* compressed GBRG bayer */ #define V4L2_PIX_FMT_PAC207 v4l2_fourcc('P', '2', '0', '7') /* compressed BGGR bayer */ #define V4L2_PIX_FMT_MR97310A v4l2_fourcc('M', '3', '1', '0') /* compressed BGGR bayer */ +#define V4L2_PIX_FMT_JL2005BCD v4l2_fourcc('J', 'L', '2', '0') /* compressed RGGB bayer */ #define V4L2_PIX_FMT_SN9C2028 v4l2_fourcc('S', 'O', 'N', 'X') /* compressed GBRG bayer */ #define V4L2_PIX_FMT_SQ905C v4l2_fourcc('9', '0', '5', 'C') /* compressed RGGB bayer */ #define V4L2_PIX_FMT_PJPG v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */ -- cgit v1.2.3 From 6c06108be53ca5e94d8b0e93883d534dd9079646 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 5 Jan 2012 02:27:57 -0300 Subject: [media] V4L/DVB: v4l2-ioctl: integer overflow in video_usercopy() If ctrls->count is too high the multiplication could overflow and array_size would be lower than expected. Mauro and Hans Verkuil suggested that we cap it at 1024. That comes from the maximum number of controls with lots of room for expantion. $ grep V4L2_CID include/linux/videodev2.h | wc -l 211 Cc: stable Signed-off-by: Dan Carpenter Signed-off-by: Mauro Carvalho Chehab --- include/linux/videodev2.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 6bfaa767a817..b2e1331ca76b 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -1132,6 +1132,7 @@ struct v4l2_querymenu { #define V4L2_CTRL_FLAG_NEXT_CTRL 0x80000000 /* User-class control IDs defined by V4L2 */ +#define V4L2_CID_MAX_CTRLS 1024 #define V4L2_CID_BASE (V4L2_CTRL_CLASS_USER | 0x900) #define V4L2_CID_USER_BASE V4L2_CID_BASE /* IDs reserved for driver specific controls */ -- cgit v1.2.3 From 96de37b62ca525cd77d2e85aea1472846ee31c4d Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Sat, 7 Jan 2012 17:26:49 -0500 Subject: tracing: Fix compile error when static ftrace is enabled The stack tracer uses the call ftrace_set_early_filter() function to allow the stack tracer to pick its own functions on boot. But this function is not defined if dynamic ftrace is not set. This causes a compiler error when stack tracer is enabled and dynamic ftrace is not. Reported-by: Ingo Molnar Signed-off-by: Steven Rostedt --- include/linux/ftrace.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index 41df6f501656..028e26f0bf08 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -339,6 +339,7 @@ static inline int ftrace_text_reserved(void *start, void *end) * functions may still be called. Use a macro instead of inline. */ #define ftrace_regex_open(ops, flag, inod, file) ({ -ENODEV; }) +#define ftrace_set_early_filter(ops, buf, enable) do { } while (0) static inline ssize_t ftrace_filter_write(struct file *file, const char __user *ubuf, size_t cnt, loff_t *ppos) { return -ENODEV; } -- cgit v1.2.3 From 73de16db43f8dcb833ab032ed274b60b23676680 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Tue, 8 Nov 2011 09:44:06 +0530 Subject: mfd: Add support for irq over gpio pin to stmpe On many boards, stmpe is present as an separate device (not as part of SoC). Here gpio lines are mostly used for getting interrupts. This patch adds in support to handle irq over gpio pin. Signed-off-by: Viresh Kumar Acked-by: Linus Walleij Signed-off-by: Samuel Ortiz --- include/linux/mfd/stmpe.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h index be1af7c42e57..270d6613aadf 100644 --- a/include/linux/mfd/stmpe.h +++ b/include/linux/mfd/stmpe.h @@ -61,6 +61,7 @@ struct stmpe_variant_info; * @variant: the detected STMPE model number * @regs: list of addresses of registers which are at different addresses on * different variants. Indexed by one of STMPE_IDX_*. + * @irq: irq number for stmpe * @irq_base: starting IRQ number for internal IRQs * @num_gpios: number of gpios, differs for variants * @ier: cache of IER registers for bus_lock @@ -76,6 +77,7 @@ struct stmpe { struct stmpe_variant_info *variant; const u8 *regs; + int irq; int irq_base; int num_gpios; u8 ier[2]; @@ -183,6 +185,9 @@ struct stmpe_ts_platform_data { * @autosleep_timeout: inactivity timeout in milliseconds for autosleep * @irq_base: base IRQ number. %STMPE_NR_IRQS irqs will be used, or * %STMPE_NR_INTERNAL_IRQS if the GPIO driver is not used. + * @irq_over_gpio: true if gpio is used to get irq + * @irq_gpio: gpio number over which irq will be requested (significant only if + * irq_over_gpio is true) * @gpio: GPIO-specific platform data * @keypad: keypad-specific platform data * @ts: touchscreen-specific platform data @@ -194,6 +199,8 @@ struct stmpe_platform_data { unsigned int irq_trigger; bool irq_invert_polarity; bool autosleep; + bool irq_over_gpio; + int irq_gpio; int autosleep_timeout; struct stmpe_gpio_platform_data *gpio; -- cgit v1.2.3 From 289aabdaf943f3676a16908e2c3cc1a1f9877ccb Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 3 Nov 2011 13:41:14 +0000 Subject: mfd: Disable more pulls on WM8994 Disable more pulls by default on WM8994 for a small current saving. Since some designs do leave SPKMODE floating provide platform data to allow that to be left enabled. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- include/linux/mfd/wm8994/pdata.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h index ea32f306dca6..54e2fef587d5 100644 --- a/include/linux/mfd/wm8994/pdata.h +++ b/include/linux/mfd/wm8994/pdata.h @@ -174,6 +174,12 @@ struct wm8994_pdata { * consumption will rise. */ bool ldo_ena_always_driven; + + /* + * SPKMODE must be pulled internally by the device on this + * system. + */ + bool spkmode_pu; }; #endif -- cgit v1.2.3 From b46a36c0e0adc92c8be2c8a6fa68d979f6eee124 Mon Sep 17 00:00:00 2001 From: "Jett.Zhou" Date: Fri, 11 Nov 2011 15:38:27 +0800 Subject: mfd: Convert 88pm860x to use regmap api Convert the 88pm860x normal bank register read/write to use the register map API. Signed-off-by: Jett.Zhou Reviewed-by: Mark Brown Signed-off-by: Samuel Ortiz --- include/linux/mfd/88pm860x.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mfd/88pm860x.h b/include/linux/mfd/88pm860x.h index 63b4fb8e3b6f..92be3476c9f5 100644 --- a/include/linux/mfd/88pm860x.h +++ b/include/linux/mfd/88pm860x.h @@ -297,10 +297,11 @@ enum { struct pm860x_chip { struct device *dev; - struct mutex io_lock; struct mutex irq_lock; struct i2c_client *client; struct i2c_client *companion; /* companion chip client */ + struct regmap *regmap; + struct regmap *regmap_companion; int buck3_double; /* DVC ramp slope double */ unsigned short companion_addr; -- cgit v1.2.3 From 2439d9714e8f4f106c8965e093f9892cfb347d76 Mon Sep 17 00:00:00 2001 From: Donggeun Kim Date: Thu, 24 Nov 2011 18:12:17 +0900 Subject: mfd: Add platform data for MAX8997 MUIC driver Currently, MAX8997 device does not support MUIC function of it. To add MAX8997 MUIC driver, header file should be updated. Signed-off-by: Donggeun Kim Signed-off-by: MyungJoo Ham Signed-off-by: Kyungmin Park Signed-off-by: Samuel Ortiz --- include/linux/mfd/max8997.h | 58 ++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 57 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mfd/max8997.h b/include/linux/mfd/max8997.h index 0bbd13dbe336..49d2a0bfd7fe 100644 --- a/include/linux/mfd/max8997.h +++ b/include/linux/mfd/max8997.h @@ -77,6 +77,60 @@ struct max8997_regulator_data { struct regulator_init_data *initdata; }; +enum max8997_muic_usb_type { + MAX8997_USB_HOST, + MAX8997_USB_DEVICE, +}; + +enum max8997_muic_charger_type { + MAX8997_CHARGER_TYPE_NONE = 0, + MAX8997_CHARGER_TYPE_USB, + MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT, + MAX8997_CHARGER_TYPE_DEDICATED_CHG, + MAX8997_CHARGER_TYPE_500MA, + MAX8997_CHARGER_TYPE_1A, + MAX8997_CHARGER_TYPE_DEAD_BATTERY = 7, +}; + +struct max8997_muic_reg_data { + u8 addr; + u8 data; +}; + +/** + * struct max8997_muic_platform_data + * @usb_callback: callback function for USB + * inform callee of USB type (HOST or DEVICE) + * and attached state(true or false) + * @charger_callback: callback function for charger + * inform callee of charger_type + * and attached state(true or false) + * @deskdock_callback: callback function for desk dock + * inform callee of attached state(true or false) + * @cardock_callback: callback function for car dock + * inform callee of attached state(true or false) + * @mhl_callback: callback function for MHL (Mobile High-definition Link) + * inform callee of attached state(true or false) + * @uart_callback: callback function for JIG UART + * inform callee of attached state(true or false) + * @init_data: array of max8997_muic_reg_data + * used for initializing registers of MAX8997 MUIC device + * @num_init_data: array size of init_data + */ +struct max8997_muic_platform_data { + void (*usb_callback)(enum max8997_muic_usb_type usb_type, + bool attached); + void (*charger_callback)(bool attached, + enum max8997_muic_charger_type charger_type); + void (*deskdock_callback) (bool attached); + void (*cardock_callback) (bool attached); + void (*mhl_callback) (bool attached); + void (*uart_callback) (bool attached); + + struct max8997_muic_reg_data *init_data; + int num_init_data; +}; + struct max8997_platform_data { /* IRQ */ int irq_base; @@ -113,7 +167,9 @@ struct max8997_platform_data { /* charge Full Timeout */ int timeout; /* 0 (no timeout), 5, 6, 7 hours */ - /* MUIC: Not implemented */ + /* ---- MUIC ---- */ + struct max8997_muic_platform_data *muic_pdata; + /* HAPTIC: Not implemented */ /* RTC: Not implemented */ /* Flash: Not implemented */ -- cgit v1.2.3 From 2161891a0a7bcad6ee8819bb324ee4a031bc8a95 Mon Sep 17 00:00:00 2001 From: Robin van der Gracht Date: Tue, 29 Nov 2011 12:09:03 +0100 Subject: mfd: Fixed unconditional reset of the mc13xxx ADC reading enable bits When the ADC is being prepared for a single or multiple channel reading, the adc0 register is reconfigured without taking the lithium cell, charge current and battery current reading enable bits into account. Which results in clearing the bits. Signed-off-by: Robin van der Gracht Signed-off-by: Samuel Ortiz --- include/linux/mfd/mc13xxx.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/mc13xxx.h b/include/linux/mfd/mc13xxx.h index 3816c2fac0ad..261fc117b40a 100644 --- a/include/linux/mfd/mc13xxx.h +++ b/include/linux/mfd/mc13xxx.h @@ -173,6 +173,9 @@ struct mc13xxx_platform_data { #define MC13XXX_ADC_MODE_MULT_CHAN 3 #define MC13XXX_ADC0 43 +#define MC13XXX_ADC0_LICELLCON (1 << 0) +#define MC13XXX_ADC0_CHRGICON (1 << 1) +#define MC13XXX_ADC0_BATICON (1 << 2) #define MC13XXX_ADC0_ADREFEN (1 << 10) #define MC13XXX_ADC0_TSMOD0 (1 << 12) #define MC13XXX_ADC0_TSMOD1 (1 << 13) @@ -184,4 +187,9 @@ struct mc13xxx_platform_data { MC13XXX_ADC0_TSMOD1 | \ MC13XXX_ADC0_TSMOD2) +#define MC13XXX_ADC0_CONFIG_MASK (MC13XXX_ADC0_TSMOD_MASK | \ + MC13XXX_ADC0_LICELLCON | \ + MC13XXX_ADC0_CHRGICON | \ + MC13XXX_ADC0_BATICON) + #endif /* ifndef __LINUX_MFD_MC13XXX_H */ -- cgit v1.2.3 From 5dd7bf59e0e8563265b3e5b33276099ef628fcc7 Mon Sep 17 00:00:00 2001 From: Jochen Friedrich Date: Sun, 27 Nov 2011 22:00:54 +0100 Subject: ARM: sa11x0: Implement autoloading of codec and codec pdata for mcp bus. Signed-off-by: Jochen Friedrich Signed-off-by: Samuel Ortiz --- include/linux/mfd/mcp.h | 7 +++++-- include/linux/mfd/ucb1x00.h | 5 ++++- include/linux/mod_devicetable.h | 11 +++++++++++ 3 files changed, 20 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/mcp.h b/include/linux/mfd/mcp.h index ee496708e38b..1515e64e3663 100644 --- a/include/linux/mfd/mcp.h +++ b/include/linux/mfd/mcp.h @@ -10,6 +10,7 @@ #ifndef MCP_H #define MCP_H +#include #include struct mcp_ops; @@ -26,7 +27,7 @@ struct mcp { dma_device_t dma_telco_rd; dma_device_t dma_telco_wr; struct device attached_device; - int gpio_base; + const char *codec; }; struct mcp_ops { @@ -44,10 +45,11 @@ void mcp_reg_write(struct mcp *, unsigned int, unsigned int); unsigned int mcp_reg_read(struct mcp *, unsigned int); void mcp_enable(struct mcp *); void mcp_disable(struct mcp *); +const struct mcp_device_id *mcp_get_device_id(const struct mcp *mcp); #define mcp_get_sclk_rate(mcp) ((mcp)->sclk_rate) struct mcp *mcp_host_alloc(struct device *, size_t); -int mcp_host_register(struct mcp *); +int mcp_host_register(struct mcp *, void *); void mcp_host_unregister(struct mcp *); struct mcp_driver { @@ -56,6 +58,7 @@ struct mcp_driver { void (*remove)(struct mcp *); int (*suspend)(struct mcp *, pm_message_t); int (*resume)(struct mcp *); + const struct mcp_device_id *id_table; }; int mcp_driver_register(struct mcp_driver *); diff --git a/include/linux/mfd/ucb1x00.h b/include/linux/mfd/ucb1x00.h index 4321f044d1e4..bc19e5fb7ea8 100644 --- a/include/linux/mfd/ucb1x00.h +++ b/include/linux/mfd/ucb1x00.h @@ -104,6 +104,9 @@ #define UCB_MODE_DYN_VFLAG_ENA (1 << 12) #define UCB_MODE_AUD_OFF_CAN (1 << 13) +struct ucb1x00_plat_data { + int gpio_base; +}; struct ucb1x00_irq { void *devid; @@ -116,7 +119,7 @@ struct ucb1x00 { unsigned int irq; struct semaphore adc_sem; spinlock_t io_lock; - u16 id; + const struct mcp_device_id *id; u16 io_dir; u16 io_out; u16 adc_cr; diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index 468819cdde87..bc50d9a80d89 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -436,6 +436,17 @@ struct spi_device_id { __attribute__((aligned(sizeof(kernel_ulong_t)))); }; +/* mcp */ + +#define MCP_NAME_SIZE 20 +#define MCP_MODULE_PREFIX "mcp:" + +struct mcp_device_id { + char name[MCP_NAME_SIZE]; + kernel_ulong_t driver_data /* Data private to the driver */ + __attribute__((aligned(sizeof(kernel_ulong_t)))); +}; + /* dmi */ enum dmi_field { DMI_NONE, -- cgit v1.2.3 From bdd6a67a3936f4da5ef382ec640b8d1eb1f209fa Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 28 Nov 2011 23:26:47 +0000 Subject: mfd: Constify WM8994 regulator_init_data The driver has no need to modify the regulator_init_data so declare it const to allow machine code to do so. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- include/linux/mfd/wm8994/pdata.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h index 54e2fef587d5..b00897a6c461 100644 --- a/include/linux/mfd/wm8994/pdata.h +++ b/include/linux/mfd/wm8994/pdata.h @@ -23,7 +23,7 @@ struct wm8994_ldo_pdata { int enable; const char *supply; - struct regulator_init_data *init_data; + const struct regulator_init_data *init_data; }; #define WM8994_CONFIGURE_GPIO 0x10000 -- cgit v1.2.3 From 83051b7287e43241ccb6adaaa92615a87274898b Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 1 Dec 2011 13:56:53 +0000 Subject: mfd: Add missing mutex.h inclusion to WM8994 core.h struct wm8994 includes a mutex so we need to include mutex.h before we declare it. All current users rely on this being done implicitly. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- include/linux/mfd/wm8994/core.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mfd/wm8994/core.h b/include/linux/mfd/wm8994/core.h index f44bdb7273bd..8eb1b75cb755 100644 --- a/include/linux/mfd/wm8994/core.h +++ b/include/linux/mfd/wm8994/core.h @@ -15,6 +15,7 @@ #ifndef __MFD_WM8994_CORE_H__ #define __MFD_WM8994_CORE_H__ +#include #include enum wm8994_type { -- cgit v1.2.3 From ee66e653ca7425bc8ffca4e00f19a8057cd14e4d Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 2 Dec 2011 14:16:33 +0100 Subject: mfd: Unify abx500 headers in mfd/abx500 This moves all the header files related to the abx500 family into a common include directory below mfd. From now on we place any subchip header in that directory. Headers previously in e.g. get prefixed and are now e.g. . The top-level abstract interface remains in . Signed-off-by: Linus Walleij Signed-off-by: Samuel Ortiz --- include/linux/mfd/ab5500/ab5500.h | 140 ---------------- include/linux/mfd/ab8500.h | 201 ----------------------- include/linux/mfd/ab8500/gpadc.h | 35 ---- include/linux/mfd/ab8500/gpio.h | 21 --- include/linux/mfd/ab8500/sysctrl.h | 254 ------------------------------ include/linux/mfd/abx500/ab5500.h | 140 ++++++++++++++++ include/linux/mfd/abx500/ab8500-gpadc.h | 35 ++++ include/linux/mfd/abx500/ab8500-gpio.h | 21 +++ include/linux/mfd/abx500/ab8500-sysctrl.h | 254 ++++++++++++++++++++++++++++++ include/linux/mfd/abx500/ab8500.h | 201 +++++++++++++++++++++++ 10 files changed, 651 insertions(+), 651 deletions(-) delete mode 100644 include/linux/mfd/ab5500/ab5500.h delete mode 100644 include/linux/mfd/ab8500.h delete mode 100644 include/linux/mfd/ab8500/gpadc.h delete mode 100644 include/linux/mfd/ab8500/gpio.h delete mode 100644 include/linux/mfd/ab8500/sysctrl.h create mode 100644 include/linux/mfd/abx500/ab5500.h create mode 100644 include/linux/mfd/abx500/ab8500-gpadc.h create mode 100644 include/linux/mfd/abx500/ab8500-gpio.h create mode 100644 include/linux/mfd/abx500/ab8500-sysctrl.h create mode 100644 include/linux/mfd/abx500/ab8500.h (limited to 'include/linux') diff --git a/include/linux/mfd/ab5500/ab5500.h b/include/linux/mfd/ab5500/ab5500.h deleted file mode 100644 index a720051ae933..000000000000 --- a/include/linux/mfd/ab5500/ab5500.h +++ /dev/null @@ -1,140 +0,0 @@ -/* - * Copyright (C) ST-Ericsson 2011 - * - * License Terms: GNU General Public License v2 - */ -#ifndef MFD_AB5500_H -#define MFD_AB5500_H - -#include - -enum ab5500_devid { - AB5500_DEVID_ADC, - AB5500_DEVID_LEDS, - AB5500_DEVID_POWER, - AB5500_DEVID_REGULATORS, - AB5500_DEVID_SIM, - AB5500_DEVID_RTC, - AB5500_DEVID_CHARGER, - AB5500_DEVID_FUELGAUGE, - AB5500_DEVID_VIBRATOR, - AB5500_DEVID_CODEC, - AB5500_DEVID_USB, - AB5500_DEVID_OTP, - AB5500_DEVID_VIDEO, - AB5500_DEVID_DBIECI, - AB5500_DEVID_ONSWA, - AB5500_NUM_DEVICES, -}; - -enum ab5500_banks { - AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP = 0, - AB5500_BANK_VDDDIG_IO_I2C_CLK_TST = 1, - AB5500_BANK_VDENC = 2, - AB5500_BANK_SIM_USBSIM = 3, - AB5500_BANK_LED = 4, - AB5500_BANK_ADC = 5, - AB5500_BANK_RTC = 6, - AB5500_BANK_STARTUP = 7, - AB5500_BANK_DBI_ECI = 8, - AB5500_BANK_CHG = 9, - AB5500_BANK_FG_BATTCOM_ACC = 10, - AB5500_BANK_USB = 11, - AB5500_BANK_IT = 12, - AB5500_BANK_VIBRA = 13, - AB5500_BANK_AUDIO_HEADSETUSB = 14, - AB5500_NUM_BANKS = 15, -}; - -enum ab5500_banks_addr { - AB5500_ADDR_VIT_IO_I2C_CLK_TST_OTP = 0x4A, - AB5500_ADDR_VDDDIG_IO_I2C_CLK_TST = 0x4B, - AB5500_ADDR_VDENC = 0x06, - AB5500_ADDR_SIM_USBSIM = 0x04, - AB5500_ADDR_LED = 0x10, - AB5500_ADDR_ADC = 0x0A, - AB5500_ADDR_RTC = 0x0F, - AB5500_ADDR_STARTUP = 0x03, - AB5500_ADDR_DBI_ECI = 0x07, - AB5500_ADDR_CHG = 0x0B, - AB5500_ADDR_FG_BATTCOM_ACC = 0x0C, - AB5500_ADDR_USB = 0x05, - AB5500_ADDR_IT = 0x0E, - AB5500_ADDR_VIBRA = 0x02, - AB5500_ADDR_AUDIO_HEADSETUSB = 0x0D, -}; - -/* - * Interrupt register offsets - * Bank : 0x0E - */ -#define AB5500_IT_SOURCE0_REG 0x20 -#define AB5500_IT_SOURCE1_REG 0x21 -#define AB5500_IT_SOURCE2_REG 0x22 -#define AB5500_IT_SOURCE3_REG 0x23 -#define AB5500_IT_SOURCE4_REG 0x24 -#define AB5500_IT_SOURCE5_REG 0x25 -#define AB5500_IT_SOURCE6_REG 0x26 -#define AB5500_IT_SOURCE7_REG 0x27 -#define AB5500_IT_SOURCE8_REG 0x28 -#define AB5500_IT_SOURCE9_REG 0x29 -#define AB5500_IT_SOURCE10_REG 0x2A -#define AB5500_IT_SOURCE11_REG 0x2B -#define AB5500_IT_SOURCE12_REG 0x2C -#define AB5500_IT_SOURCE13_REG 0x2D -#define AB5500_IT_SOURCE14_REG 0x2E -#define AB5500_IT_SOURCE15_REG 0x2F -#define AB5500_IT_SOURCE16_REG 0x30 -#define AB5500_IT_SOURCE17_REG 0x31 -#define AB5500_IT_SOURCE18_REG 0x32 -#define AB5500_IT_SOURCE19_REG 0x33 -#define AB5500_IT_SOURCE20_REG 0x34 -#define AB5500_IT_SOURCE21_REG 0x35 -#define AB5500_IT_SOURCE22_REG 0x36 -#define AB5500_IT_SOURCE23_REG 0x37 - -#define AB5500_NUM_IRQ_REGS 23 - -/** - * struct ab5500 - * @access_mutex: lock out concurrent accesses to the AB registers - * @dev: a pointer to the device struct for this chip driver - * @ab5500_irq: the analog baseband irq - * @irq_base: the platform configuration irq base for subdevices - * @chip_name: name of this chip variant - * @chip_id: 8 bit chip ID for this chip variant - * @irq_lock: a lock to protect the mask - * @abb_events: a local bit mask of the prcmu wakeup events - * @event_mask: a local copy of the mask event registers - * @last_event_mask: a copy of the last event_mask written to hardware - * @startup_events: a copy of the first reading of the event registers - * @startup_events_read: whether the first events have been read - */ -struct ab5500 { - struct mutex access_mutex; - struct device *dev; - unsigned int ab5500_irq; - unsigned int irq_base; - char chip_name[32]; - u8 chip_id; - struct mutex irq_lock; - u32 abb_events; - u8 mask[AB5500_NUM_IRQ_REGS]; - u8 oldmask[AB5500_NUM_IRQ_REGS]; - u8 startup_events[AB5500_NUM_IRQ_REGS]; - bool startup_events_read; -#ifdef CONFIG_DEBUG_FS - unsigned int debug_bank; - unsigned int debug_address; -#endif -}; - -struct ab5500_platform_data { - struct {unsigned int base; unsigned int count; } irq; - void *dev_data[AB5500_NUM_DEVICES]; - struct abx500_init_settings *init_settings; - unsigned int init_settings_sz; - bool pm_power_off; -}; - -#endif /* MFD_AB5500_H */ diff --git a/include/linux/mfd/ab8500.h b/include/linux/mfd/ab8500.h deleted file mode 100644 index 838c6b487cc5..000000000000 --- a/include/linux/mfd/ab8500.h +++ /dev/null @@ -1,201 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License Terms: GNU General Public License v2 - * Author: Srinidhi Kasagar - */ -#ifndef MFD_AB8500_H -#define MFD_AB8500_H - -#include - -/* - * AB8500 bank addresses - */ -#define AB8500_SYS_CTRL1_BLOCK 0x1 -#define AB8500_SYS_CTRL2_BLOCK 0x2 -#define AB8500_REGU_CTRL1 0x3 -#define AB8500_REGU_CTRL2 0x4 -#define AB8500_USB 0x5 -#define AB8500_TVOUT 0x6 -#define AB8500_DBI 0x7 -#define AB8500_ECI_AV_ACC 0x8 -#define AB8500_RESERVED 0x9 -#define AB8500_GPADC 0xA -#define AB8500_CHARGER 0xB -#define AB8500_GAS_GAUGE 0xC -#define AB8500_AUDIO 0xD -#define AB8500_INTERRUPT 0xE -#define AB8500_RTC 0xF -#define AB8500_MISC 0x10 -#define AB8500_DEVELOPMENT 0x11 -#define AB8500_DEBUG 0x12 -#define AB8500_PROD_TEST 0x13 -#define AB8500_OTP_EMUL 0x15 - -/* - * Interrupts - */ - -#define AB8500_INT_MAIN_EXT_CH_NOT_OK 0 -#define AB8500_INT_UN_PLUG_TV_DET 1 -#define AB8500_INT_PLUG_TV_DET 2 -#define AB8500_INT_TEMP_WARM 3 -#define AB8500_INT_PON_KEY2DB_F 4 -#define AB8500_INT_PON_KEY2DB_R 5 -#define AB8500_INT_PON_KEY1DB_F 6 -#define AB8500_INT_PON_KEY1DB_R 7 -#define AB8500_INT_BATT_OVV 8 -#define AB8500_INT_MAIN_CH_UNPLUG_DET 10 -#define AB8500_INT_MAIN_CH_PLUG_DET 11 -#define AB8500_INT_USB_ID_DET_F 12 -#define AB8500_INT_USB_ID_DET_R 13 -#define AB8500_INT_VBUS_DET_F 14 -#define AB8500_INT_VBUS_DET_R 15 -#define AB8500_INT_VBUS_CH_DROP_END 16 -#define AB8500_INT_RTC_60S 17 -#define AB8500_INT_RTC_ALARM 18 -#define AB8500_INT_BAT_CTRL_INDB 20 -#define AB8500_INT_CH_WD_EXP 21 -#define AB8500_INT_VBUS_OVV 22 -#define AB8500_INT_MAIN_CH_DROP_END 23 -#define AB8500_INT_CCN_CONV_ACC 24 -#define AB8500_INT_INT_AUD 25 -#define AB8500_INT_CCEOC 26 -#define AB8500_INT_CC_INT_CALIB 27 -#define AB8500_INT_LOW_BAT_F 28 -#define AB8500_INT_LOW_BAT_R 29 -#define AB8500_INT_BUP_CHG_NOT_OK 30 -#define AB8500_INT_BUP_CHG_OK 31 -#define AB8500_INT_GP_HW_ADC_CONV_END 32 -#define AB8500_INT_ACC_DETECT_1DB_F 33 -#define AB8500_INT_ACC_DETECT_1DB_R 34 -#define AB8500_INT_ACC_DETECT_22DB_F 35 -#define AB8500_INT_ACC_DETECT_22DB_R 36 -#define AB8500_INT_ACC_DETECT_21DB_F 37 -#define AB8500_INT_ACC_DETECT_21DB_R 38 -#define AB8500_INT_GP_SW_ADC_CONV_END 39 -#define AB8500_INT_GPIO6R 40 -#define AB8500_INT_GPIO7R 41 -#define AB8500_INT_GPIO8R 42 -#define AB8500_INT_GPIO9R 43 -#define AB8500_INT_GPIO10R 44 -#define AB8500_INT_GPIO11R 45 -#define AB8500_INT_GPIO12R 46 -#define AB8500_INT_GPIO13R 47 -#define AB8500_INT_GPIO24R 48 -#define AB8500_INT_GPIO25R 49 -#define AB8500_INT_GPIO36R 50 -#define AB8500_INT_GPIO37R 51 -#define AB8500_INT_GPIO38R 52 -#define AB8500_INT_GPIO39R 53 -#define AB8500_INT_GPIO40R 54 -#define AB8500_INT_GPIO41R 55 -#define AB8500_INT_GPIO6F 56 -#define AB8500_INT_GPIO7F 57 -#define AB8500_INT_GPIO8F 58 -#define AB8500_INT_GPIO9F 59 -#define AB8500_INT_GPIO10F 60 -#define AB8500_INT_GPIO11F 61 -#define AB8500_INT_GPIO12F 62 -#define AB8500_INT_GPIO13F 63 -#define AB8500_INT_GPIO24F 64 -#define AB8500_INT_GPIO25F 65 -#define AB8500_INT_GPIO36F 66 -#define AB8500_INT_GPIO37F 67 -#define AB8500_INT_GPIO38F 68 -#define AB8500_INT_GPIO39F 69 -#define AB8500_INT_GPIO40F 70 -#define AB8500_INT_GPIO41F 71 -#define AB8500_INT_ADP_SOURCE_ERROR 72 -#define AB8500_INT_ADP_SINK_ERROR 73 -#define AB8500_INT_ADP_PROBE_PLUG 74 -#define AB8500_INT_ADP_PROBE_UNPLUG 75 -#define AB8500_INT_ADP_SENSE_OFF 76 -#define AB8500_INT_USB_PHY_POWER_ERR 78 -#define AB8500_INT_USB_LINK_STATUS 79 -#define AB8500_INT_BTEMP_LOW 80 -#define AB8500_INT_BTEMP_LOW_MEDIUM 81 -#define AB8500_INT_BTEMP_MEDIUM_HIGH 82 -#define AB8500_INT_BTEMP_HIGH 83 -#define AB8500_INT_USB_CHARGER_NOT_OK 89 -#define AB8500_INT_ID_WAKEUP_R 90 -#define AB8500_INT_ID_DET_R1R 92 -#define AB8500_INT_ID_DET_R2R 93 -#define AB8500_INT_ID_DET_R3R 94 -#define AB8500_INT_ID_DET_R4R 95 -#define AB8500_INT_ID_WAKEUP_F 96 -#define AB8500_INT_ID_DET_R1F 98 -#define AB8500_INT_ID_DET_R2F 99 -#define AB8500_INT_ID_DET_R3F 100 -#define AB8500_INT_ID_DET_R4F 101 -#define AB8500_INT_USB_CHG_DET_DONE 102 -#define AB8500_INT_USB_CH_TH_PROT_F 104 -#define AB8500_INT_USB_CH_TH_PROT_R 105 -#define AB8500_INT_MAIN_CH_TH_PROT_F 106 -#define AB8500_INT_MAIN_CH_TH_PROT_R 107 -#define AB8500_INT_USB_CHARGER_NOT_OKF 111 - -#define AB8500_NR_IRQS 112 -#define AB8500_NUM_IRQ_REGS 14 - -/** - * struct ab8500 - ab8500 internal structure - * @dev: parent device - * @lock: read/write operations lock - * @irq_lock: genirq bus lock - * @irq: irq line - * @chip_id: chip revision id - * @write: register write - * @read: register read - * @rx_buf: rx buf for SPI - * @tx_buf: tx buf for SPI - * @mask: cache of IRQ regs for bus lock - * @oldmask: cache of previous IRQ regs for bus lock - */ -struct ab8500 { - struct device *dev; - struct mutex lock; - struct mutex irq_lock; - - int irq_base; - int irq; - u8 chip_id; - - int (*write) (struct ab8500 *a8500, u16 addr, u8 data); - int (*read) (struct ab8500 *a8500, u16 addr); - - unsigned long tx_buf[4]; - unsigned long rx_buf[4]; - - u8 mask[AB8500_NUM_IRQ_REGS]; - u8 oldmask[AB8500_NUM_IRQ_REGS]; -}; - -struct regulator_reg_init; -struct regulator_init_data; -struct ab8500_gpio_platform_data; - -/** - * struct ab8500_platform_data - AB8500 platform data - * @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used - * @init: board-specific initialization after detection of ab8500 - * @num_regulator_reg_init: number of regulator init registers - * @regulator_reg_init: regulator init registers - * @num_regulator: number of regulators - * @regulator: machine-specific constraints for regulators - */ -struct ab8500_platform_data { - int irq_base; - void (*init) (struct ab8500 *); - int num_regulator_reg_init; - struct ab8500_regulator_reg_init *regulator_reg_init; - int num_regulator; - struct regulator_init_data *regulator; - struct ab8500_gpio_platform_data *gpio; -}; - -extern int __devinit ab8500_init(struct ab8500 *ab8500); -extern int __devexit ab8500_exit(struct ab8500 *ab8500); - -#endif /* MFD_AB8500_H */ diff --git a/include/linux/mfd/ab8500/gpadc.h b/include/linux/mfd/ab8500/gpadc.h deleted file mode 100644 index 252966769d93..000000000000 --- a/include/linux/mfd/ab8500/gpadc.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Copyright (C) 2010 ST-Ericsson SA - * Licensed under GPLv2. - * - * Author: Arun R Murthy - * Author: Daniel Willerud - */ - -#ifndef _AB8500_GPADC_H -#define _AB8500_GPADC_H - -/* GPADC source: From datasheet(ADCSwSel[4:0] in GPADCCtrl2) */ -#define BAT_CTRL 0x01 -#define BTEMP_BALL 0x02 -#define MAIN_CHARGER_V 0x03 -#define ACC_DETECT1 0x04 -#define ACC_DETECT2 0x05 -#define ADC_AUX1 0x06 -#define ADC_AUX2 0x07 -#define MAIN_BAT_V 0x08 -#define VBUS_V 0x09 -#define MAIN_CHARGER_C 0x0A -#define USB_CHARGER_C 0x0B -#define BK_BAT_V 0x0C -#define DIE_TEMP 0x0D - -struct ab8500_gpadc; - -struct ab8500_gpadc *ab8500_gpadc_get(char *name); -int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 channel); -int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel); -int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, - u8 channel, int ad_value); - -#endif /* _AB8500_GPADC_H */ diff --git a/include/linux/mfd/ab8500/gpio.h b/include/linux/mfd/ab8500/gpio.h deleted file mode 100644 index 488a8c920a29..000000000000 --- a/include/linux/mfd/ab8500/gpio.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Copyright ST-Ericsson 2010. - * - * Author: Bibek Basu - * Licensed under GPLv2. - */ - -#ifndef _AB8500_GPIO_H -#define _AB8500_GPIO_H - -/* - * Platform data to register a block: only the initial gpio/irq number. - */ - -struct ab8500_gpio_platform_data { - int gpio_base; - u32 irq_base; - u8 config_reg[7]; -}; - -#endif /* _AB8500_GPIO_H */ diff --git a/include/linux/mfd/ab8500/sysctrl.h b/include/linux/mfd/ab8500/sysctrl.h deleted file mode 100644 index 10da0291f8f8..000000000000 --- a/include/linux/mfd/ab8500/sysctrl.h +++ /dev/null @@ -1,254 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * Author: Mattias Nilsson for ST Ericsson. - * License terms: GNU General Public License (GPL) version 2 - */ -#ifndef __AB8500_SYSCTRL_H -#define __AB8500_SYSCTRL_H - -#include - -#ifdef CONFIG_AB8500_CORE - -int ab8500_sysctrl_read(u16 reg, u8 *value); -int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value); - -#else - -static inline int ab8500_sysctrl_read(u16 reg, u8 *value) -{ - return 0; -} - -static inline int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value) -{ - return 0; -} - -#endif /* CONFIG_AB8500_CORE */ - -static inline int ab8500_sysctrl_set(u16 reg, u8 bits) -{ - return ab8500_sysctrl_write(reg, bits, bits); -} - -static inline int ab8500_sysctrl_clear(u16 reg, u8 bits) -{ - return ab8500_sysctrl_write(reg, bits, 0); -} - -/* Registers */ -#define AB8500_TURNONSTATUS 0x100 -#define AB8500_RESETSTATUS 0x101 -#define AB8500_PONKEY1PRESSSTATUS 0x102 -#define AB8500_SYSCLKREQSTATUS 0x142 -#define AB8500_STW4500CTRL1 0x180 -#define AB8500_STW4500CTRL2 0x181 -#define AB8500_STW4500CTRL3 0x200 -#define AB8500_MAINWDOGCTRL 0x201 -#define AB8500_MAINWDOGTIMER 0x202 -#define AB8500_LOWBAT 0x203 -#define AB8500_BATTOK 0x204 -#define AB8500_SYSCLKTIMER 0x205 -#define AB8500_SMPSCLKCTRL 0x206 -#define AB8500_SMPSCLKSEL1 0x207 -#define AB8500_SMPSCLKSEL2 0x208 -#define AB8500_SMPSCLKSEL3 0x209 -#define AB8500_SYSULPCLKCONF 0x20A -#define AB8500_SYSULPCLKCTRL1 0x20B -#define AB8500_SYSCLKCTRL 0x20C -#define AB8500_SYSCLKREQ1VALID 0x20D -#define AB8500_SYSTEMCTRLSUP 0x20F -#define AB8500_SYSCLKREQ1RFCLKBUF 0x210 -#define AB8500_SYSCLKREQ2RFCLKBUF 0x211 -#define AB8500_SYSCLKREQ3RFCLKBUF 0x212 -#define AB8500_SYSCLKREQ4RFCLKBUF 0x213 -#define AB8500_SYSCLKREQ5RFCLKBUF 0x214 -#define AB8500_SYSCLKREQ6RFCLKBUF 0x215 -#define AB8500_SYSCLKREQ7RFCLKBUF 0x216 -#define AB8500_SYSCLKREQ8RFCLKBUF 0x217 -#define AB8500_DITHERCLKCTRL 0x220 -#define AB8500_SWATCTRL 0x230 -#define AB8500_HIQCLKCTRL 0x232 -#define AB8500_VSIMSYSCLKCTRL 0x233 - -/* Bits */ -#define AB8500_TURNONSTATUS_PORNVBAT BIT(0) -#define AB8500_TURNONSTATUS_PONKEY1DBF BIT(1) -#define AB8500_TURNONSTATUS_PONKEY2DBF BIT(2) -#define AB8500_TURNONSTATUS_RTCALARM BIT(3) -#define AB8500_TURNONSTATUS_MAINCHDET BIT(4) -#define AB8500_TURNONSTATUS_VBUSDET BIT(5) -#define AB8500_TURNONSTATUS_USBIDDETECT BIT(6) - -#define AB8500_RESETSTATUS_RESETN4500NSTATUS BIT(0) -#define AB8500_RESETSTATUS_SWRESETN4500NSTATUS BIT(2) - -#define AB8500_PONKEY1PRESSSTATUS_PONKEY1PRESSTIME_MASK 0x7F -#define AB8500_PONKEY1PRESSSTATUS_PONKEY1PRESSTIME_SHIFT 0 - -#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ1STATUS BIT(0) -#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ2STATUS BIT(1) -#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ3STATUS BIT(2) -#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ4STATUS BIT(3) -#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ5STATUS BIT(4) -#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ6STATUS BIT(5) -#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ7STATUS BIT(6) -#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ8STATUS BIT(7) - -#define AB8500_STW4500CTRL1_SWOFF BIT(0) -#define AB8500_STW4500CTRL1_SWRESET4500N BIT(1) -#define AB8500_STW4500CTRL1_THDB8500SWOFF BIT(2) - -#define AB8500_STW4500CTRL2_RESETNVAUX1VALID BIT(0) -#define AB8500_STW4500CTRL2_RESETNVAUX2VALID BIT(1) -#define AB8500_STW4500CTRL2_RESETNVAUX3VALID BIT(2) -#define AB8500_STW4500CTRL2_RESETNVMODVALID BIT(3) -#define AB8500_STW4500CTRL2_RESETNVEXTSUPPLY1VALID BIT(4) -#define AB8500_STW4500CTRL2_RESETNVEXTSUPPLY2VALID BIT(5) -#define AB8500_STW4500CTRL2_RESETNVEXTSUPPLY3VALID BIT(6) -#define AB8500_STW4500CTRL2_RESETNVSMPS1VALID BIT(7) - -#define AB8500_STW4500CTRL3_CLK32KOUT2DIS BIT(0) -#define AB8500_STW4500CTRL3_RESETAUDN BIT(1) -#define AB8500_STW4500CTRL3_RESETDENCN BIT(2) -#define AB8500_STW4500CTRL3_THSDENA BIT(3) - -#define AB8500_MAINWDOGCTRL_MAINWDOGENA BIT(0) -#define AB8500_MAINWDOGCTRL_MAINWDOGKICK BIT(1) -#define AB8500_MAINWDOGCTRL_WDEXPTURNONVALID BIT(4) - -#define AB8500_MAINWDOGTIMER_MAINWDOGTIMER_MASK 0x7F -#define AB8500_MAINWDOGTIMER_MAINWDOGTIMER_SHIFT 0 - -#define AB8500_LOWBAT_LOWBATENA BIT(0) -#define AB8500_LOWBAT_LOWBAT_MASK 0x7E -#define AB8500_LOWBAT_LOWBAT_SHIFT 1 - -#define AB8500_BATTOK_BATTOKSEL0THF_MASK 0x0F -#define AB8500_BATTOK_BATTOKSEL0THF_SHIFT 0 -#define AB8500_BATTOK_BATTOKSEL1THF_MASK 0xF0 -#define AB8500_BATTOK_BATTOKSEL1THF_SHIFT 4 - -#define AB8500_SYSCLKTIMER_SYSCLKTIMER_MASK 0x0F -#define AB8500_SYSCLKTIMER_SYSCLKTIMER_SHIFT 0 -#define AB8500_SYSCLKTIMER_SYSCLKTIMERADJ_MASK 0xF0 -#define AB8500_SYSCLKTIMER_SYSCLKTIMERADJ_SHIFT 4 - -#define AB8500_SMPSCLKCTRL_SMPSCLKINTSEL_MASK 0x03 -#define AB8500_SMPSCLKCTRL_SMPSCLKINTSEL_SHIFT 0 -#define AB8500_SMPSCLKCTRL_3M2CLKINTENA BIT(2) - -#define AB8500_SMPSCLKSEL1_VARMCLKSEL_MASK 0x07 -#define AB8500_SMPSCLKSEL1_VARMCLKSEL_SHIFT 0 -#define AB8500_SMPSCLKSEL1_VAPECLKSEL_MASK 0x38 -#define AB8500_SMPSCLKSEL1_VAPECLKSEL_SHIFT 3 - -#define AB8500_SMPSCLKSEL2_VMODCLKSEL_MASK 0x07 -#define AB8500_SMPSCLKSEL2_VMODCLKSEL_SHIFT 0 -#define AB8500_SMPSCLKSEL2_VSMPS1CLKSEL_MASK 0x38 -#define AB8500_SMPSCLKSEL2_VSMPS1CLKSEL_SHIFT 3 - -#define AB8500_SMPSCLKSEL3_VSMPS2CLKSEL_MASK 0x07 -#define AB8500_SMPSCLKSEL3_VSMPS2CLKSEL_SHIFT 0 -#define AB8500_SMPSCLKSEL3_VSMPS3CLKSEL_MASK 0x38 -#define AB8500_SMPSCLKSEL3_VSMPS3CLKSEL_SHIFT 3 - -#define AB8500_SYSULPCLKCONF_ULPCLKCONF_MASK 0x03 -#define AB8500_SYSULPCLKCONF_ULPCLKCONF_SHIFT 0 -#define AB8500_SYSULPCLKCONF_CLK27MHZSTRE BIT(2) -#define AB8500_SYSULPCLKCONF_TVOUTCLKDELN BIT(3) -#define AB8500_SYSULPCLKCONF_TVOUTCLKINV BIT(4) -#define AB8500_SYSULPCLKCONF_ULPCLKSTRE BIT(5) -#define AB8500_SYSULPCLKCONF_CLK27MHZBUFENA BIT(6) -#define AB8500_SYSULPCLKCONF_CLK27MHZPDENA BIT(7) - -#define AB8500_SYSULPCLKCTRL1_SYSULPCLKINTSEL_MASK 0x03 -#define AB8500_SYSULPCLKCTRL1_SYSULPCLKINTSEL_SHIFT 0 -#define AB8500_SYSULPCLKCTRL1_ULPCLKREQ BIT(2) -#define AB8500_SYSULPCLKCTRL1_4500SYSCLKREQ BIT(3) -#define AB8500_SYSULPCLKCTRL1_AUDIOCLKENA BIT(4) -#define AB8500_SYSULPCLKCTRL1_SYSCLKBUF2REQ BIT(5) -#define AB8500_SYSULPCLKCTRL1_SYSCLKBUF3REQ BIT(6) -#define AB8500_SYSULPCLKCTRL1_SYSCLKBUF4REQ BIT(7) - -#define AB8500_SYSCLKCTRL_TVOUTPLLENA BIT(0) -#define AB8500_SYSCLKCTRL_TVOUTCLKENA BIT(1) -#define AB8500_SYSCLKCTRL_USBCLKENA BIT(2) - -#define AB8500_SYSCLKREQ1VALID_SYSCLKREQ1VALID BIT(0) -#define AB8500_SYSCLKREQ1VALID_ULPCLKREQ1VALID BIT(1) -#define AB8500_SYSCLKREQ1VALID_USBSYSCLKREQ1VALID BIT(2) - -#define AB8500_SYSTEMCTRLSUP_EXTSUP12LPNCLKSEL_MASK 0x03 -#define AB8500_SYSTEMCTRLSUP_EXTSUP12LPNCLKSEL_SHIFT 0 -#define AB8500_SYSTEMCTRLSUP_EXTSUP3LPNCLKSEL_MASK 0x0C -#define AB8500_SYSTEMCTRLSUP_EXTSUP3LPNCLKSEL_SHIFT 2 -#define AB8500_SYSTEMCTRLSUP_INTDB8500NOD BIT(4) - -#define AB8500_SYSCLKREQ1RFCLKBUF_SYSCLKREQ1RFCLKBUF2 BIT(2) -#define AB8500_SYSCLKREQ1RFCLKBUF_SYSCLKREQ1RFCLKBUF3 BIT(3) -#define AB8500_SYSCLKREQ1RFCLKBUF_SYSCLKREQ1RFCLKBUF4 BIT(4) - -#define AB8500_SYSCLKREQ2RFCLKBUF_SYSCLKREQ2RFCLKBUF2 BIT(2) -#define AB8500_SYSCLKREQ2RFCLKBUF_SYSCLKREQ2RFCLKBUF3 BIT(3) -#define AB8500_SYSCLKREQ2RFCLKBUF_SYSCLKREQ2RFCLKBUF4 BIT(4) - -#define AB8500_SYSCLKREQ3RFCLKBUF_SYSCLKREQ3RFCLKBUF2 BIT(2) -#define AB8500_SYSCLKREQ3RFCLKBUF_SYSCLKREQ3RFCLKBUF3 BIT(3) -#define AB8500_SYSCLKREQ3RFCLKBUF_SYSCLKREQ3RFCLKBUF4 BIT(4) - -#define AB8500_SYSCLKREQ4RFCLKBUF_SYSCLKREQ4RFCLKBUF2 BIT(2) -#define AB8500_SYSCLKREQ4RFCLKBUF_SYSCLKREQ4RFCLKBUF3 BIT(3) -#define AB8500_SYSCLKREQ4RFCLKBUF_SYSCLKREQ4RFCLKBUF4 BIT(4) - -#define AB8500_SYSCLKREQ5RFCLKBUF_SYSCLKREQ5RFCLKBUF2 BIT(2) -#define AB8500_SYSCLKREQ5RFCLKBUF_SYSCLKREQ5RFCLKBUF3 BIT(3) -#define AB8500_SYSCLKREQ5RFCLKBUF_SYSCLKREQ5RFCLKBUF4 BIT(4) - -#define AB8500_SYSCLKREQ6RFCLKBUF_SYSCLKREQ6RFCLKBUF2 BIT(2) -#define AB8500_SYSCLKREQ6RFCLKBUF_SYSCLKREQ6RFCLKBUF3 BIT(3) -#define AB8500_SYSCLKREQ6RFCLKBUF_SYSCLKREQ6RFCLKBUF4 BIT(4) - -#define AB8500_SYSCLKREQ7RFCLKBUF_SYSCLKREQ7RFCLKBUF2 BIT(2) -#define AB8500_SYSCLKREQ7RFCLKBUF_SYSCLKREQ7RFCLKBUF3 BIT(3) -#define AB8500_SYSCLKREQ7RFCLKBUF_SYSCLKREQ7RFCLKBUF4 BIT(4) - -#define AB8500_SYSCLKREQ8RFCLKBUF_SYSCLKREQ8RFCLKBUF2 BIT(2) -#define AB8500_SYSCLKREQ8RFCLKBUF_SYSCLKREQ8RFCLKBUF3 BIT(3) -#define AB8500_SYSCLKREQ8RFCLKBUF_SYSCLKREQ8RFCLKBUF4 BIT(4) - -#define AB8500_DITHERCLKCTRL_VARMDITHERENA BIT(0) -#define AB8500_DITHERCLKCTRL_VSMPS3DITHERENA BIT(1) -#define AB8500_DITHERCLKCTRL_VSMPS1DITHERENA BIT(2) -#define AB8500_DITHERCLKCTRL_VSMPS2DITHERENA BIT(3) -#define AB8500_DITHERCLKCTRL_VMODDITHERENA BIT(4) -#define AB8500_DITHERCLKCTRL_VAPEDITHERENA BIT(5) -#define AB8500_DITHERCLKCTRL_DITHERDEL_MASK 0xC0 -#define AB8500_DITHERCLKCTRL_DITHERDEL_SHIFT 6 - -#define AB8500_SWATCTRL_UPDATERF BIT(0) -#define AB8500_SWATCTRL_SWATENABLE BIT(1) -#define AB8500_SWATCTRL_RFOFFTIMER_MASK 0x1C -#define AB8500_SWATCTRL_RFOFFTIMER_SHIFT 2 -#define AB8500_SWATCTRL_SWATBIT5 BIT(6) - -#define AB8500_HIQCLKCTRL_SYSCLKREQ1HIQENAVALID BIT(0) -#define AB8500_HIQCLKCTRL_SYSCLKREQ2HIQENAVALID BIT(1) -#define AB8500_HIQCLKCTRL_SYSCLKREQ3HIQENAVALID BIT(2) -#define AB8500_HIQCLKCTRL_SYSCLKREQ4HIQENAVALID BIT(3) -#define AB8500_HIQCLKCTRL_SYSCLKREQ5HIQENAVALID BIT(4) -#define AB8500_HIQCLKCTRL_SYSCLKREQ6HIQENAVALID BIT(5) -#define AB8500_HIQCLKCTRL_SYSCLKREQ7HIQENAVALID BIT(6) -#define AB8500_HIQCLKCTRL_SYSCLKREQ8HIQENAVALID BIT(7) - -#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ1VALID BIT(0) -#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ2VALID BIT(1) -#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ3VALID BIT(2) -#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ4VALID BIT(3) -#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ5VALID BIT(4) -#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ6VALID BIT(5) -#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ7VALID BIT(6) -#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ8VALID BIT(7) - -#endif /* __AB8500_SYSCTRL_H */ diff --git a/include/linux/mfd/abx500/ab5500.h b/include/linux/mfd/abx500/ab5500.h new file mode 100644 index 000000000000..a720051ae933 --- /dev/null +++ b/include/linux/mfd/abx500/ab5500.h @@ -0,0 +1,140 @@ +/* + * Copyright (C) ST-Ericsson 2011 + * + * License Terms: GNU General Public License v2 + */ +#ifndef MFD_AB5500_H +#define MFD_AB5500_H + +#include + +enum ab5500_devid { + AB5500_DEVID_ADC, + AB5500_DEVID_LEDS, + AB5500_DEVID_POWER, + AB5500_DEVID_REGULATORS, + AB5500_DEVID_SIM, + AB5500_DEVID_RTC, + AB5500_DEVID_CHARGER, + AB5500_DEVID_FUELGAUGE, + AB5500_DEVID_VIBRATOR, + AB5500_DEVID_CODEC, + AB5500_DEVID_USB, + AB5500_DEVID_OTP, + AB5500_DEVID_VIDEO, + AB5500_DEVID_DBIECI, + AB5500_DEVID_ONSWA, + AB5500_NUM_DEVICES, +}; + +enum ab5500_banks { + AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP = 0, + AB5500_BANK_VDDDIG_IO_I2C_CLK_TST = 1, + AB5500_BANK_VDENC = 2, + AB5500_BANK_SIM_USBSIM = 3, + AB5500_BANK_LED = 4, + AB5500_BANK_ADC = 5, + AB5500_BANK_RTC = 6, + AB5500_BANK_STARTUP = 7, + AB5500_BANK_DBI_ECI = 8, + AB5500_BANK_CHG = 9, + AB5500_BANK_FG_BATTCOM_ACC = 10, + AB5500_BANK_USB = 11, + AB5500_BANK_IT = 12, + AB5500_BANK_VIBRA = 13, + AB5500_BANK_AUDIO_HEADSETUSB = 14, + AB5500_NUM_BANKS = 15, +}; + +enum ab5500_banks_addr { + AB5500_ADDR_VIT_IO_I2C_CLK_TST_OTP = 0x4A, + AB5500_ADDR_VDDDIG_IO_I2C_CLK_TST = 0x4B, + AB5500_ADDR_VDENC = 0x06, + AB5500_ADDR_SIM_USBSIM = 0x04, + AB5500_ADDR_LED = 0x10, + AB5500_ADDR_ADC = 0x0A, + AB5500_ADDR_RTC = 0x0F, + AB5500_ADDR_STARTUP = 0x03, + AB5500_ADDR_DBI_ECI = 0x07, + AB5500_ADDR_CHG = 0x0B, + AB5500_ADDR_FG_BATTCOM_ACC = 0x0C, + AB5500_ADDR_USB = 0x05, + AB5500_ADDR_IT = 0x0E, + AB5500_ADDR_VIBRA = 0x02, + AB5500_ADDR_AUDIO_HEADSETUSB = 0x0D, +}; + +/* + * Interrupt register offsets + * Bank : 0x0E + */ +#define AB5500_IT_SOURCE0_REG 0x20 +#define AB5500_IT_SOURCE1_REG 0x21 +#define AB5500_IT_SOURCE2_REG 0x22 +#define AB5500_IT_SOURCE3_REG 0x23 +#define AB5500_IT_SOURCE4_REG 0x24 +#define AB5500_IT_SOURCE5_REG 0x25 +#define AB5500_IT_SOURCE6_REG 0x26 +#define AB5500_IT_SOURCE7_REG 0x27 +#define AB5500_IT_SOURCE8_REG 0x28 +#define AB5500_IT_SOURCE9_REG 0x29 +#define AB5500_IT_SOURCE10_REG 0x2A +#define AB5500_IT_SOURCE11_REG 0x2B +#define AB5500_IT_SOURCE12_REG 0x2C +#define AB5500_IT_SOURCE13_REG 0x2D +#define AB5500_IT_SOURCE14_REG 0x2E +#define AB5500_IT_SOURCE15_REG 0x2F +#define AB5500_IT_SOURCE16_REG 0x30 +#define AB5500_IT_SOURCE17_REG 0x31 +#define AB5500_IT_SOURCE18_REG 0x32 +#define AB5500_IT_SOURCE19_REG 0x33 +#define AB5500_IT_SOURCE20_REG 0x34 +#define AB5500_IT_SOURCE21_REG 0x35 +#define AB5500_IT_SOURCE22_REG 0x36 +#define AB5500_IT_SOURCE23_REG 0x37 + +#define AB5500_NUM_IRQ_REGS 23 + +/** + * struct ab5500 + * @access_mutex: lock out concurrent accesses to the AB registers + * @dev: a pointer to the device struct for this chip driver + * @ab5500_irq: the analog baseband irq + * @irq_base: the platform configuration irq base for subdevices + * @chip_name: name of this chip variant + * @chip_id: 8 bit chip ID for this chip variant + * @irq_lock: a lock to protect the mask + * @abb_events: a local bit mask of the prcmu wakeup events + * @event_mask: a local copy of the mask event registers + * @last_event_mask: a copy of the last event_mask written to hardware + * @startup_events: a copy of the first reading of the event registers + * @startup_events_read: whether the first events have been read + */ +struct ab5500 { + struct mutex access_mutex; + struct device *dev; + unsigned int ab5500_irq; + unsigned int irq_base; + char chip_name[32]; + u8 chip_id; + struct mutex irq_lock; + u32 abb_events; + u8 mask[AB5500_NUM_IRQ_REGS]; + u8 oldmask[AB5500_NUM_IRQ_REGS]; + u8 startup_events[AB5500_NUM_IRQ_REGS]; + bool startup_events_read; +#ifdef CONFIG_DEBUG_FS + unsigned int debug_bank; + unsigned int debug_address; +#endif +}; + +struct ab5500_platform_data { + struct {unsigned int base; unsigned int count; } irq; + void *dev_data[AB5500_NUM_DEVICES]; + struct abx500_init_settings *init_settings; + unsigned int init_settings_sz; + bool pm_power_off; +}; + +#endif /* MFD_AB5500_H */ diff --git a/include/linux/mfd/abx500/ab8500-gpadc.h b/include/linux/mfd/abx500/ab8500-gpadc.h new file mode 100644 index 000000000000..252966769d93 --- /dev/null +++ b/include/linux/mfd/abx500/ab8500-gpadc.h @@ -0,0 +1,35 @@ +/* + * Copyright (C) 2010 ST-Ericsson SA + * Licensed under GPLv2. + * + * Author: Arun R Murthy + * Author: Daniel Willerud + */ + +#ifndef _AB8500_GPADC_H +#define _AB8500_GPADC_H + +/* GPADC source: From datasheet(ADCSwSel[4:0] in GPADCCtrl2) */ +#define BAT_CTRL 0x01 +#define BTEMP_BALL 0x02 +#define MAIN_CHARGER_V 0x03 +#define ACC_DETECT1 0x04 +#define ACC_DETECT2 0x05 +#define ADC_AUX1 0x06 +#define ADC_AUX2 0x07 +#define MAIN_BAT_V 0x08 +#define VBUS_V 0x09 +#define MAIN_CHARGER_C 0x0A +#define USB_CHARGER_C 0x0B +#define BK_BAT_V 0x0C +#define DIE_TEMP 0x0D + +struct ab8500_gpadc; + +struct ab8500_gpadc *ab8500_gpadc_get(char *name); +int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 channel); +int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel); +int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, + u8 channel, int ad_value); + +#endif /* _AB8500_GPADC_H */ diff --git a/include/linux/mfd/abx500/ab8500-gpio.h b/include/linux/mfd/abx500/ab8500-gpio.h new file mode 100644 index 000000000000..488a8c920a29 --- /dev/null +++ b/include/linux/mfd/abx500/ab8500-gpio.h @@ -0,0 +1,21 @@ +/* + * Copyright ST-Ericsson 2010. + * + * Author: Bibek Basu + * Licensed under GPLv2. + */ + +#ifndef _AB8500_GPIO_H +#define _AB8500_GPIO_H + +/* + * Platform data to register a block: only the initial gpio/irq number. + */ + +struct ab8500_gpio_platform_data { + int gpio_base; + u32 irq_base; + u8 config_reg[7]; +}; + +#endif /* _AB8500_GPIO_H */ diff --git a/include/linux/mfd/abx500/ab8500-sysctrl.h b/include/linux/mfd/abx500/ab8500-sysctrl.h new file mode 100644 index 000000000000..10da0291f8f8 --- /dev/null +++ b/include/linux/mfd/abx500/ab8500-sysctrl.h @@ -0,0 +1,254 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * Author: Mattias Nilsson for ST Ericsson. + * License terms: GNU General Public License (GPL) version 2 + */ +#ifndef __AB8500_SYSCTRL_H +#define __AB8500_SYSCTRL_H + +#include + +#ifdef CONFIG_AB8500_CORE + +int ab8500_sysctrl_read(u16 reg, u8 *value); +int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value); + +#else + +static inline int ab8500_sysctrl_read(u16 reg, u8 *value) +{ + return 0; +} + +static inline int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value) +{ + return 0; +} + +#endif /* CONFIG_AB8500_CORE */ + +static inline int ab8500_sysctrl_set(u16 reg, u8 bits) +{ + return ab8500_sysctrl_write(reg, bits, bits); +} + +static inline int ab8500_sysctrl_clear(u16 reg, u8 bits) +{ + return ab8500_sysctrl_write(reg, bits, 0); +} + +/* Registers */ +#define AB8500_TURNONSTATUS 0x100 +#define AB8500_RESETSTATUS 0x101 +#define AB8500_PONKEY1PRESSSTATUS 0x102 +#define AB8500_SYSCLKREQSTATUS 0x142 +#define AB8500_STW4500CTRL1 0x180 +#define AB8500_STW4500CTRL2 0x181 +#define AB8500_STW4500CTRL3 0x200 +#define AB8500_MAINWDOGCTRL 0x201 +#define AB8500_MAINWDOGTIMER 0x202 +#define AB8500_LOWBAT 0x203 +#define AB8500_BATTOK 0x204 +#define AB8500_SYSCLKTIMER 0x205 +#define AB8500_SMPSCLKCTRL 0x206 +#define AB8500_SMPSCLKSEL1 0x207 +#define AB8500_SMPSCLKSEL2 0x208 +#define AB8500_SMPSCLKSEL3 0x209 +#define AB8500_SYSULPCLKCONF 0x20A +#define AB8500_SYSULPCLKCTRL1 0x20B +#define AB8500_SYSCLKCTRL 0x20C +#define AB8500_SYSCLKREQ1VALID 0x20D +#define AB8500_SYSTEMCTRLSUP 0x20F +#define AB8500_SYSCLKREQ1RFCLKBUF 0x210 +#define AB8500_SYSCLKREQ2RFCLKBUF 0x211 +#define AB8500_SYSCLKREQ3RFCLKBUF 0x212 +#define AB8500_SYSCLKREQ4RFCLKBUF 0x213 +#define AB8500_SYSCLKREQ5RFCLKBUF 0x214 +#define AB8500_SYSCLKREQ6RFCLKBUF 0x215 +#define AB8500_SYSCLKREQ7RFCLKBUF 0x216 +#define AB8500_SYSCLKREQ8RFCLKBUF 0x217 +#define AB8500_DITHERCLKCTRL 0x220 +#define AB8500_SWATCTRL 0x230 +#define AB8500_HIQCLKCTRL 0x232 +#define AB8500_VSIMSYSCLKCTRL 0x233 + +/* Bits */ +#define AB8500_TURNONSTATUS_PORNVBAT BIT(0) +#define AB8500_TURNONSTATUS_PONKEY1DBF BIT(1) +#define AB8500_TURNONSTATUS_PONKEY2DBF BIT(2) +#define AB8500_TURNONSTATUS_RTCALARM BIT(3) +#define AB8500_TURNONSTATUS_MAINCHDET BIT(4) +#define AB8500_TURNONSTATUS_VBUSDET BIT(5) +#define AB8500_TURNONSTATUS_USBIDDETECT BIT(6) + +#define AB8500_RESETSTATUS_RESETN4500NSTATUS BIT(0) +#define AB8500_RESETSTATUS_SWRESETN4500NSTATUS BIT(2) + +#define AB8500_PONKEY1PRESSSTATUS_PONKEY1PRESSTIME_MASK 0x7F +#define AB8500_PONKEY1PRESSSTATUS_PONKEY1PRESSTIME_SHIFT 0 + +#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ1STATUS BIT(0) +#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ2STATUS BIT(1) +#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ3STATUS BIT(2) +#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ4STATUS BIT(3) +#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ5STATUS BIT(4) +#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ6STATUS BIT(5) +#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ7STATUS BIT(6) +#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ8STATUS BIT(7) + +#define AB8500_STW4500CTRL1_SWOFF BIT(0) +#define AB8500_STW4500CTRL1_SWRESET4500N BIT(1) +#define AB8500_STW4500CTRL1_THDB8500SWOFF BIT(2) + +#define AB8500_STW4500CTRL2_RESETNVAUX1VALID BIT(0) +#define AB8500_STW4500CTRL2_RESETNVAUX2VALID BIT(1) +#define AB8500_STW4500CTRL2_RESETNVAUX3VALID BIT(2) +#define AB8500_STW4500CTRL2_RESETNVMODVALID BIT(3) +#define AB8500_STW4500CTRL2_RESETNVEXTSUPPLY1VALID BIT(4) +#define AB8500_STW4500CTRL2_RESETNVEXTSUPPLY2VALID BIT(5) +#define AB8500_STW4500CTRL2_RESETNVEXTSUPPLY3VALID BIT(6) +#define AB8500_STW4500CTRL2_RESETNVSMPS1VALID BIT(7) + +#define AB8500_STW4500CTRL3_CLK32KOUT2DIS BIT(0) +#define AB8500_STW4500CTRL3_RESETAUDN BIT(1) +#define AB8500_STW4500CTRL3_RESETDENCN BIT(2) +#define AB8500_STW4500CTRL3_THSDENA BIT(3) + +#define AB8500_MAINWDOGCTRL_MAINWDOGENA BIT(0) +#define AB8500_MAINWDOGCTRL_MAINWDOGKICK BIT(1) +#define AB8500_MAINWDOGCTRL_WDEXPTURNONVALID BIT(4) + +#define AB8500_MAINWDOGTIMER_MAINWDOGTIMER_MASK 0x7F +#define AB8500_MAINWDOGTIMER_MAINWDOGTIMER_SHIFT 0 + +#define AB8500_LOWBAT_LOWBATENA BIT(0) +#define AB8500_LOWBAT_LOWBAT_MASK 0x7E +#define AB8500_LOWBAT_LOWBAT_SHIFT 1 + +#define AB8500_BATTOK_BATTOKSEL0THF_MASK 0x0F +#define AB8500_BATTOK_BATTOKSEL0THF_SHIFT 0 +#define AB8500_BATTOK_BATTOKSEL1THF_MASK 0xF0 +#define AB8500_BATTOK_BATTOKSEL1THF_SHIFT 4 + +#define AB8500_SYSCLKTIMER_SYSCLKTIMER_MASK 0x0F +#define AB8500_SYSCLKTIMER_SYSCLKTIMER_SHIFT 0 +#define AB8500_SYSCLKTIMER_SYSCLKTIMERADJ_MASK 0xF0 +#define AB8500_SYSCLKTIMER_SYSCLKTIMERADJ_SHIFT 4 + +#define AB8500_SMPSCLKCTRL_SMPSCLKINTSEL_MASK 0x03 +#define AB8500_SMPSCLKCTRL_SMPSCLKINTSEL_SHIFT 0 +#define AB8500_SMPSCLKCTRL_3M2CLKINTENA BIT(2) + +#define AB8500_SMPSCLKSEL1_VARMCLKSEL_MASK 0x07 +#define AB8500_SMPSCLKSEL1_VARMCLKSEL_SHIFT 0 +#define AB8500_SMPSCLKSEL1_VAPECLKSEL_MASK 0x38 +#define AB8500_SMPSCLKSEL1_VAPECLKSEL_SHIFT 3 + +#define AB8500_SMPSCLKSEL2_VMODCLKSEL_MASK 0x07 +#define AB8500_SMPSCLKSEL2_VMODCLKSEL_SHIFT 0 +#define AB8500_SMPSCLKSEL2_VSMPS1CLKSEL_MASK 0x38 +#define AB8500_SMPSCLKSEL2_VSMPS1CLKSEL_SHIFT 3 + +#define AB8500_SMPSCLKSEL3_VSMPS2CLKSEL_MASK 0x07 +#define AB8500_SMPSCLKSEL3_VSMPS2CLKSEL_SHIFT 0 +#define AB8500_SMPSCLKSEL3_VSMPS3CLKSEL_MASK 0x38 +#define AB8500_SMPSCLKSEL3_VSMPS3CLKSEL_SHIFT 3 + +#define AB8500_SYSULPCLKCONF_ULPCLKCONF_MASK 0x03 +#define AB8500_SYSULPCLKCONF_ULPCLKCONF_SHIFT 0 +#define AB8500_SYSULPCLKCONF_CLK27MHZSTRE BIT(2) +#define AB8500_SYSULPCLKCONF_TVOUTCLKDELN BIT(3) +#define AB8500_SYSULPCLKCONF_TVOUTCLKINV BIT(4) +#define AB8500_SYSULPCLKCONF_ULPCLKSTRE BIT(5) +#define AB8500_SYSULPCLKCONF_CLK27MHZBUFENA BIT(6) +#define AB8500_SYSULPCLKCONF_CLK27MHZPDENA BIT(7) + +#define AB8500_SYSULPCLKCTRL1_SYSULPCLKINTSEL_MASK 0x03 +#define AB8500_SYSULPCLKCTRL1_SYSULPCLKINTSEL_SHIFT 0 +#define AB8500_SYSULPCLKCTRL1_ULPCLKREQ BIT(2) +#define AB8500_SYSULPCLKCTRL1_4500SYSCLKREQ BIT(3) +#define AB8500_SYSULPCLKCTRL1_AUDIOCLKENA BIT(4) +#define AB8500_SYSULPCLKCTRL1_SYSCLKBUF2REQ BIT(5) +#define AB8500_SYSULPCLKCTRL1_SYSCLKBUF3REQ BIT(6) +#define AB8500_SYSULPCLKCTRL1_SYSCLKBUF4REQ BIT(7) + +#define AB8500_SYSCLKCTRL_TVOUTPLLENA BIT(0) +#define AB8500_SYSCLKCTRL_TVOUTCLKENA BIT(1) +#define AB8500_SYSCLKCTRL_USBCLKENA BIT(2) + +#define AB8500_SYSCLKREQ1VALID_SYSCLKREQ1VALID BIT(0) +#define AB8500_SYSCLKREQ1VALID_ULPCLKREQ1VALID BIT(1) +#define AB8500_SYSCLKREQ1VALID_USBSYSCLKREQ1VALID BIT(2) + +#define AB8500_SYSTEMCTRLSUP_EXTSUP12LPNCLKSEL_MASK 0x03 +#define AB8500_SYSTEMCTRLSUP_EXTSUP12LPNCLKSEL_SHIFT 0 +#define AB8500_SYSTEMCTRLSUP_EXTSUP3LPNCLKSEL_MASK 0x0C +#define AB8500_SYSTEMCTRLSUP_EXTSUP3LPNCLKSEL_SHIFT 2 +#define AB8500_SYSTEMCTRLSUP_INTDB8500NOD BIT(4) + +#define AB8500_SYSCLKREQ1RFCLKBUF_SYSCLKREQ1RFCLKBUF2 BIT(2) +#define AB8500_SYSCLKREQ1RFCLKBUF_SYSCLKREQ1RFCLKBUF3 BIT(3) +#define AB8500_SYSCLKREQ1RFCLKBUF_SYSCLKREQ1RFCLKBUF4 BIT(4) + +#define AB8500_SYSCLKREQ2RFCLKBUF_SYSCLKREQ2RFCLKBUF2 BIT(2) +#define AB8500_SYSCLKREQ2RFCLKBUF_SYSCLKREQ2RFCLKBUF3 BIT(3) +#define AB8500_SYSCLKREQ2RFCLKBUF_SYSCLKREQ2RFCLKBUF4 BIT(4) + +#define AB8500_SYSCLKREQ3RFCLKBUF_SYSCLKREQ3RFCLKBUF2 BIT(2) +#define AB8500_SYSCLKREQ3RFCLKBUF_SYSCLKREQ3RFCLKBUF3 BIT(3) +#define AB8500_SYSCLKREQ3RFCLKBUF_SYSCLKREQ3RFCLKBUF4 BIT(4) + +#define AB8500_SYSCLKREQ4RFCLKBUF_SYSCLKREQ4RFCLKBUF2 BIT(2) +#define AB8500_SYSCLKREQ4RFCLKBUF_SYSCLKREQ4RFCLKBUF3 BIT(3) +#define AB8500_SYSCLKREQ4RFCLKBUF_SYSCLKREQ4RFCLKBUF4 BIT(4) + +#define AB8500_SYSCLKREQ5RFCLKBUF_SYSCLKREQ5RFCLKBUF2 BIT(2) +#define AB8500_SYSCLKREQ5RFCLKBUF_SYSCLKREQ5RFCLKBUF3 BIT(3) +#define AB8500_SYSCLKREQ5RFCLKBUF_SYSCLKREQ5RFCLKBUF4 BIT(4) + +#define AB8500_SYSCLKREQ6RFCLKBUF_SYSCLKREQ6RFCLKBUF2 BIT(2) +#define AB8500_SYSCLKREQ6RFCLKBUF_SYSCLKREQ6RFCLKBUF3 BIT(3) +#define AB8500_SYSCLKREQ6RFCLKBUF_SYSCLKREQ6RFCLKBUF4 BIT(4) + +#define AB8500_SYSCLKREQ7RFCLKBUF_SYSCLKREQ7RFCLKBUF2 BIT(2) +#define AB8500_SYSCLKREQ7RFCLKBUF_SYSCLKREQ7RFCLKBUF3 BIT(3) +#define AB8500_SYSCLKREQ7RFCLKBUF_SYSCLKREQ7RFCLKBUF4 BIT(4) + +#define AB8500_SYSCLKREQ8RFCLKBUF_SYSCLKREQ8RFCLKBUF2 BIT(2) +#define AB8500_SYSCLKREQ8RFCLKBUF_SYSCLKREQ8RFCLKBUF3 BIT(3) +#define AB8500_SYSCLKREQ8RFCLKBUF_SYSCLKREQ8RFCLKBUF4 BIT(4) + +#define AB8500_DITHERCLKCTRL_VARMDITHERENA BIT(0) +#define AB8500_DITHERCLKCTRL_VSMPS3DITHERENA BIT(1) +#define AB8500_DITHERCLKCTRL_VSMPS1DITHERENA BIT(2) +#define AB8500_DITHERCLKCTRL_VSMPS2DITHERENA BIT(3) +#define AB8500_DITHERCLKCTRL_VMODDITHERENA BIT(4) +#define AB8500_DITHERCLKCTRL_VAPEDITHERENA BIT(5) +#define AB8500_DITHERCLKCTRL_DITHERDEL_MASK 0xC0 +#define AB8500_DITHERCLKCTRL_DITHERDEL_SHIFT 6 + +#define AB8500_SWATCTRL_UPDATERF BIT(0) +#define AB8500_SWATCTRL_SWATENABLE BIT(1) +#define AB8500_SWATCTRL_RFOFFTIMER_MASK 0x1C +#define AB8500_SWATCTRL_RFOFFTIMER_SHIFT 2 +#define AB8500_SWATCTRL_SWATBIT5 BIT(6) + +#define AB8500_HIQCLKCTRL_SYSCLKREQ1HIQENAVALID BIT(0) +#define AB8500_HIQCLKCTRL_SYSCLKREQ2HIQENAVALID BIT(1) +#define AB8500_HIQCLKCTRL_SYSCLKREQ3HIQENAVALID BIT(2) +#define AB8500_HIQCLKCTRL_SYSCLKREQ4HIQENAVALID BIT(3) +#define AB8500_HIQCLKCTRL_SYSCLKREQ5HIQENAVALID BIT(4) +#define AB8500_HIQCLKCTRL_SYSCLKREQ6HIQENAVALID BIT(5) +#define AB8500_HIQCLKCTRL_SYSCLKREQ7HIQENAVALID BIT(6) +#define AB8500_HIQCLKCTRL_SYSCLKREQ8HIQENAVALID BIT(7) + +#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ1VALID BIT(0) +#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ2VALID BIT(1) +#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ3VALID BIT(2) +#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ4VALID BIT(3) +#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ5VALID BIT(4) +#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ6VALID BIT(5) +#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ7VALID BIT(6) +#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ8VALID BIT(7) + +#endif /* __AB8500_SYSCTRL_H */ diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h new file mode 100644 index 000000000000..838c6b487cc5 --- /dev/null +++ b/include/linux/mfd/abx500/ab8500.h @@ -0,0 +1,201 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License v2 + * Author: Srinidhi Kasagar + */ +#ifndef MFD_AB8500_H +#define MFD_AB8500_H + +#include + +/* + * AB8500 bank addresses + */ +#define AB8500_SYS_CTRL1_BLOCK 0x1 +#define AB8500_SYS_CTRL2_BLOCK 0x2 +#define AB8500_REGU_CTRL1 0x3 +#define AB8500_REGU_CTRL2 0x4 +#define AB8500_USB 0x5 +#define AB8500_TVOUT 0x6 +#define AB8500_DBI 0x7 +#define AB8500_ECI_AV_ACC 0x8 +#define AB8500_RESERVED 0x9 +#define AB8500_GPADC 0xA +#define AB8500_CHARGER 0xB +#define AB8500_GAS_GAUGE 0xC +#define AB8500_AUDIO 0xD +#define AB8500_INTERRUPT 0xE +#define AB8500_RTC 0xF +#define AB8500_MISC 0x10 +#define AB8500_DEVELOPMENT 0x11 +#define AB8500_DEBUG 0x12 +#define AB8500_PROD_TEST 0x13 +#define AB8500_OTP_EMUL 0x15 + +/* + * Interrupts + */ + +#define AB8500_INT_MAIN_EXT_CH_NOT_OK 0 +#define AB8500_INT_UN_PLUG_TV_DET 1 +#define AB8500_INT_PLUG_TV_DET 2 +#define AB8500_INT_TEMP_WARM 3 +#define AB8500_INT_PON_KEY2DB_F 4 +#define AB8500_INT_PON_KEY2DB_R 5 +#define AB8500_INT_PON_KEY1DB_F 6 +#define AB8500_INT_PON_KEY1DB_R 7 +#define AB8500_INT_BATT_OVV 8 +#define AB8500_INT_MAIN_CH_UNPLUG_DET 10 +#define AB8500_INT_MAIN_CH_PLUG_DET 11 +#define AB8500_INT_USB_ID_DET_F 12 +#define AB8500_INT_USB_ID_DET_R 13 +#define AB8500_INT_VBUS_DET_F 14 +#define AB8500_INT_VBUS_DET_R 15 +#define AB8500_INT_VBUS_CH_DROP_END 16 +#define AB8500_INT_RTC_60S 17 +#define AB8500_INT_RTC_ALARM 18 +#define AB8500_INT_BAT_CTRL_INDB 20 +#define AB8500_INT_CH_WD_EXP 21 +#define AB8500_INT_VBUS_OVV 22 +#define AB8500_INT_MAIN_CH_DROP_END 23 +#define AB8500_INT_CCN_CONV_ACC 24 +#define AB8500_INT_INT_AUD 25 +#define AB8500_INT_CCEOC 26 +#define AB8500_INT_CC_INT_CALIB 27 +#define AB8500_INT_LOW_BAT_F 28 +#define AB8500_INT_LOW_BAT_R 29 +#define AB8500_INT_BUP_CHG_NOT_OK 30 +#define AB8500_INT_BUP_CHG_OK 31 +#define AB8500_INT_GP_HW_ADC_CONV_END 32 +#define AB8500_INT_ACC_DETECT_1DB_F 33 +#define AB8500_INT_ACC_DETECT_1DB_R 34 +#define AB8500_INT_ACC_DETECT_22DB_F 35 +#define AB8500_INT_ACC_DETECT_22DB_R 36 +#define AB8500_INT_ACC_DETECT_21DB_F 37 +#define AB8500_INT_ACC_DETECT_21DB_R 38 +#define AB8500_INT_GP_SW_ADC_CONV_END 39 +#define AB8500_INT_GPIO6R 40 +#define AB8500_INT_GPIO7R 41 +#define AB8500_INT_GPIO8R 42 +#define AB8500_INT_GPIO9R 43 +#define AB8500_INT_GPIO10R 44 +#define AB8500_INT_GPIO11R 45 +#define AB8500_INT_GPIO12R 46 +#define AB8500_INT_GPIO13R 47 +#define AB8500_INT_GPIO24R 48 +#define AB8500_INT_GPIO25R 49 +#define AB8500_INT_GPIO36R 50 +#define AB8500_INT_GPIO37R 51 +#define AB8500_INT_GPIO38R 52 +#define AB8500_INT_GPIO39R 53 +#define AB8500_INT_GPIO40R 54 +#define AB8500_INT_GPIO41R 55 +#define AB8500_INT_GPIO6F 56 +#define AB8500_INT_GPIO7F 57 +#define AB8500_INT_GPIO8F 58 +#define AB8500_INT_GPIO9F 59 +#define AB8500_INT_GPIO10F 60 +#define AB8500_INT_GPIO11F 61 +#define AB8500_INT_GPIO12F 62 +#define AB8500_INT_GPIO13F 63 +#define AB8500_INT_GPIO24F 64 +#define AB8500_INT_GPIO25F 65 +#define AB8500_INT_GPIO36F 66 +#define AB8500_INT_GPIO37F 67 +#define AB8500_INT_GPIO38F 68 +#define AB8500_INT_GPIO39F 69 +#define AB8500_INT_GPIO40F 70 +#define AB8500_INT_GPIO41F 71 +#define AB8500_INT_ADP_SOURCE_ERROR 72 +#define AB8500_INT_ADP_SINK_ERROR 73 +#define AB8500_INT_ADP_PROBE_PLUG 74 +#define AB8500_INT_ADP_PROBE_UNPLUG 75 +#define AB8500_INT_ADP_SENSE_OFF 76 +#define AB8500_INT_USB_PHY_POWER_ERR 78 +#define AB8500_INT_USB_LINK_STATUS 79 +#define AB8500_INT_BTEMP_LOW 80 +#define AB8500_INT_BTEMP_LOW_MEDIUM 81 +#define AB8500_INT_BTEMP_MEDIUM_HIGH 82 +#define AB8500_INT_BTEMP_HIGH 83 +#define AB8500_INT_USB_CHARGER_NOT_OK 89 +#define AB8500_INT_ID_WAKEUP_R 90 +#define AB8500_INT_ID_DET_R1R 92 +#define AB8500_INT_ID_DET_R2R 93 +#define AB8500_INT_ID_DET_R3R 94 +#define AB8500_INT_ID_DET_R4R 95 +#define AB8500_INT_ID_WAKEUP_F 96 +#define AB8500_INT_ID_DET_R1F 98 +#define AB8500_INT_ID_DET_R2F 99 +#define AB8500_INT_ID_DET_R3F 100 +#define AB8500_INT_ID_DET_R4F 101 +#define AB8500_INT_USB_CHG_DET_DONE 102 +#define AB8500_INT_USB_CH_TH_PROT_F 104 +#define AB8500_INT_USB_CH_TH_PROT_R 105 +#define AB8500_INT_MAIN_CH_TH_PROT_F 106 +#define AB8500_INT_MAIN_CH_TH_PROT_R 107 +#define AB8500_INT_USB_CHARGER_NOT_OKF 111 + +#define AB8500_NR_IRQS 112 +#define AB8500_NUM_IRQ_REGS 14 + +/** + * struct ab8500 - ab8500 internal structure + * @dev: parent device + * @lock: read/write operations lock + * @irq_lock: genirq bus lock + * @irq: irq line + * @chip_id: chip revision id + * @write: register write + * @read: register read + * @rx_buf: rx buf for SPI + * @tx_buf: tx buf for SPI + * @mask: cache of IRQ regs for bus lock + * @oldmask: cache of previous IRQ regs for bus lock + */ +struct ab8500 { + struct device *dev; + struct mutex lock; + struct mutex irq_lock; + + int irq_base; + int irq; + u8 chip_id; + + int (*write) (struct ab8500 *a8500, u16 addr, u8 data); + int (*read) (struct ab8500 *a8500, u16 addr); + + unsigned long tx_buf[4]; + unsigned long rx_buf[4]; + + u8 mask[AB8500_NUM_IRQ_REGS]; + u8 oldmask[AB8500_NUM_IRQ_REGS]; +}; + +struct regulator_reg_init; +struct regulator_init_data; +struct ab8500_gpio_platform_data; + +/** + * struct ab8500_platform_data - AB8500 platform data + * @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used + * @init: board-specific initialization after detection of ab8500 + * @num_regulator_reg_init: number of regulator init registers + * @regulator_reg_init: regulator init registers + * @num_regulator: number of regulators + * @regulator: machine-specific constraints for regulators + */ +struct ab8500_platform_data { + int irq_base; + void (*init) (struct ab8500 *); + int num_regulator_reg_init; + struct ab8500_regulator_reg_init *regulator_reg_init; + int num_regulator; + struct regulator_init_data *regulator; + struct ab8500_gpio_platform_data *gpio; +}; + +extern int __devinit ab8500_init(struct ab8500 *ab8500); +extern int __devexit ab8500_exit(struct ab8500 *ab8500); + +#endif /* MFD_AB8500_H */ -- cgit v1.2.3 From 26cc3ab984cd00e95cb58ba5aaea4238ea56c700 Mon Sep 17 00:00:00 2001 From: Igor Grinberg Date: Sun, 13 Nov 2011 11:49:50 +0200 Subject: mfd: Add power off functionality to TWL TWL family of PMICs, used in master mode, have a power off functionality. The resulting power off sequence shuts down all the SoC supplies, LDOs, etc. The sequence is described in the datasheets chapter "Power-Off Sequence". Note, that board must be wired correctly for the power off to work as expected. Signed-off-by: Igor Grinberg Signed-off-by: Samuel Ortiz --- include/linux/i2c/twl.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h index 114c0f6fc63d..78d3465251d6 100644 --- a/include/linux/i2c/twl.h +++ b/include/linux/i2c/twl.h @@ -652,10 +652,12 @@ struct twl4030_power_data { unsigned num; struct twl4030_resconfig *resource_config; #define TWL4030_RESCONFIG_UNDEF ((u8)-1) + bool use_poweroff; /* Board is wired for TWL poweroff */ }; extern void twl4030_power_init(struct twl4030_power_data *triton2_scripts); extern int twl4030_remove_script(u8 flags); +extern void twl4030_power_off(void); struct twl4030_codec_data { unsigned int digimic_delay; /* in ms */ -- cgit v1.2.3 From f6dd2db940a1a0c6b9f7112109115c8243ba752b Mon Sep 17 00:00:00 2001 From: Donggeun Kim Date: Wed, 14 Dec 2011 18:23:55 +0900 Subject: mfd: Add platform data and devices for MAX8997 LED control MAX8997 device does not support LED control function of it. To enable MAX8997-LED driver, platform data and devices for LED are updated. Signed-off-by: Donggeun Kim Signed-off-by: MyungJoo Ham Signed-off-by: Kyungmin Park Signed-off-by: Samuel Ortiz --- include/linux/mfd/max8997.h | 25 ++++++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mfd/max8997.h b/include/linux/mfd/max8997.h index 49d2a0bfd7fe..fff590521e50 100644 --- a/include/linux/mfd/max8997.h +++ b/include/linux/mfd/max8997.h @@ -131,6 +131,28 @@ struct max8997_muic_platform_data { int num_init_data; }; +enum max8997_led_mode { + MAX8997_NONE, + MAX8997_FLASH_MODE, + MAX8997_MOVIE_MODE, + MAX8997_FLASH_PIN_CONTROL_MODE, + MAX8997_MOVIE_PIN_CONTROL_MODE, +}; + +/** + * struct max8997_led_platform_data + * The number of LED devices for MAX8997 is two + * @mode: LED mode for each LED device + * @brightness: initial brightness for each LED device + * range: + * [0 - 31]: MAX8997_FLASH_MODE and MAX8997_FLASH_PIN_CONTROL_MODE + * [0 - 15]: MAX8997_MOVIE_MODE and MAX8997_MOVIE_PIN_CONTROL_MODE + */ +struct max8997_led_platform_data { + enum max8997_led_mode mode[2]; + u8 brightness[2]; +}; + struct max8997_platform_data { /* IRQ */ int irq_base; @@ -172,7 +194,8 @@ struct max8997_platform_data { /* HAPTIC: Not implemented */ /* RTC: Not implemented */ - /* Flash: Not implemented */ + /* ---- LED ---- */ + struct max8997_led_platform_data *led_pdata; }; #endif /* __LINUX_MFD_MAX8998_H */ -- cgit v1.2.3 From 1a6e4b7415339e3b11a87cff0d701b8a2e55f062 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 17 Nov 2011 11:02:20 +0530 Subject: mfd: Separate out STMPE controller and interface specific code Few STMPE controller can have register interface over SPI or I2C. Current implementation only supports I2C and all code is present in a single file stmpe.c. It would be better to separate out I2C interface specific code from controller specific code. Later SPI specific code can be added in a separate file. This patch separates out I2C and controller specific code into separate files, making stmpe.c independent of I2C. Signed-off-by: Viresh Kumar Acked-by: Linus Walleij Signed-off-by: Samuel Ortiz --- include/linux/mfd/stmpe.h | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h index 270d6613aadf..babc6b2857d3 100644 --- a/include/linux/mfd/stmpe.h +++ b/include/linux/mfd/stmpe.h @@ -50,13 +50,15 @@ enum { struct stmpe_variant_info; +struct stmpe_client_info; /** * struct stmpe - STMPE MFD structure * @lock: lock protecting I/O operations * @irq_lock: IRQ bus lock * @dev: device, mostly for dev_dbg() - * @i2c: i2c client + * @client: client - i2c or spi + * @ci: client specific information * @partnum: part number * @variant: the detected STMPE model number * @regs: list of addresses of registers which are at different addresses on @@ -72,7 +74,8 @@ struct stmpe { struct mutex lock; struct mutex irq_lock; struct device *dev; - struct i2c_client *i2c; + void *client; + struct stmpe_client_info *ci; enum stmpe_partnum partnum; struct stmpe_variant_info *variant; const u8 *regs; -- cgit v1.2.3 From 1cda2394e95415f1469ab8eaffd081395e112551 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 17 Nov 2011 11:02:22 +0530 Subject: mfd: Add support for stmpe variant 610 STMPE610 is very much like STMPE811, except the number of gpio pins, which is 8 in 811 and 6 in 610. This patch adds support for variant 610. STMPE610 will share most of the code with STMPE811. Signed-off-by: Viresh Kumar Signed-off-by: Samuel Ortiz --- include/linux/mfd/stmpe.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h index babc6b2857d3..342005afd347 100644 --- a/include/linux/mfd/stmpe.h +++ b/include/linux/mfd/stmpe.h @@ -20,6 +20,7 @@ enum stmpe_block { }; enum stmpe_partnum { + STMPE610, STMPE811, STMPE1601, STMPE2401, -- cgit v1.2.3 From 7f7f4ea15ef4645f3888310a7a761fc2c4f689c9 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 17 Nov 2011 11:02:23 +0530 Subject: mfd: Add support for stmpe variant 801 STMPE801 is a GPIO expander. Registers for 801 are much different from other variants. This patch adds support for STMPE801 in stmpe mfd driver. Signed-off-by: Bhupesh Sharma Signed-off-by: Pratyush Anand Signed-off-by: Viresh Kumar Signed-off-by: Samuel Ortiz --- include/linux/mfd/stmpe.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h index 342005afd347..ca1d7a347600 100644 --- a/include/linux/mfd/stmpe.h +++ b/include/linux/mfd/stmpe.h @@ -21,6 +21,7 @@ enum stmpe_block { enum stmpe_partnum { STMPE610, + STMPE801, STMPE811, STMPE1601, STMPE2401, -- cgit v1.2.3 From 0f5f70783eddde2bd277ae521fa04226cb1e249d Mon Sep 17 00:00:00 2001 From: Sangbeom Kim Date: Fri, 23 Dec 2011 17:28:08 +0900 Subject: mfd: Add S5M core driver S5M series are pmic including mutiple functional devices. It can support PMIC, RTC, Battery charger, codec. This patch implement core driver for s5m series. Signed-off-by: Sangbeom Kim Reviewed-by: Mark Brown Signed-off-by: Samuel Ortiz --- include/linux/mfd/s5m87xx/s5m-core.h | 373 +++++++++++++++++++++++++++++++++++ include/linux/mfd/s5m87xx/s5m-pmic.h | 100 ++++++++++ include/linux/mfd/s5m87xx/s5m-rtc.h | 84 ++++++++ 3 files changed, 557 insertions(+) create mode 100644 include/linux/mfd/s5m87xx/s5m-core.h create mode 100644 include/linux/mfd/s5m87xx/s5m-pmic.h create mode 100644 include/linux/mfd/s5m87xx/s5m-rtc.h (limited to 'include/linux') diff --git a/include/linux/mfd/s5m87xx/s5m-core.h b/include/linux/mfd/s5m87xx/s5m-core.h new file mode 100644 index 000000000000..a7480b57f92d --- /dev/null +++ b/include/linux/mfd/s5m87xx/s5m-core.h @@ -0,0 +1,373 @@ +/* + * s5m-core.h + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __LINUX_MFD_S5M_CORE_H +#define __LINUX_MFD_S5M_CORE_H + +#define NUM_IRQ_REGS 4 + +enum s5m_device_type { + S5M8751X, + S5M8763X, + S5M8767X, +}; + +/* S5M8767 registers */ +enum s5m8767_reg { + S5M8767_REG_ID, + S5M8767_REG_INT1, + S5M8767_REG_INT2, + S5M8767_REG_INT3, + S5M8767_REG_INT1M, + S5M8767_REG_INT2M, + S5M8767_REG_INT3M, + S5M8767_REG_STATUS1, + S5M8767_REG_STATUS2, + S5M8767_REG_STATUS3, + S5M8767_REG_CTRL1, + S5M8767_REG_CTRL2, + S5M8767_REG_LOWBAT1, + S5M8767_REG_LOWBAT2, + S5M8767_REG_BUCHG, + S5M8767_REG_DVSRAMP, + S5M8767_REG_DVSTIMER2 = 0x10, + S5M8767_REG_DVSTIMER3, + S5M8767_REG_DVSTIMER4, + S5M8767_REG_LDO1, + S5M8767_REG_LDO2, + S5M8767_REG_LDO3, + S5M8767_REG_LDO4, + S5M8767_REG_LDO5, + S5M8767_REG_LDO6, + S5M8767_REG_LDO7, + S5M8767_REG_LDO8, + S5M8767_REG_LDO9, + S5M8767_REG_LDO10, + S5M8767_REG_LDO11, + S5M8767_REG_LDO12, + S5M8767_REG_LDO13, + S5M8767_REG_LDO14 = 0x20, + S5M8767_REG_LDO15, + S5M8767_REG_LDO16, + S5M8767_REG_LDO17, + S5M8767_REG_LDO18, + S5M8767_REG_LDO19, + S5M8767_REG_LDO20, + S5M8767_REG_LDO21, + S5M8767_REG_LDO22, + S5M8767_REG_LDO23, + S5M8767_REG_LDO24, + S5M8767_REG_LDO25, + S5M8767_REG_LDO26, + S5M8767_REG_LDO27, + S5M8767_REG_LDO28, + S5M8767_REG_UVLO = 0x31, + S5M8767_REG_BUCK1CTRL1, + S5M8767_REG_BUCK1CTRL2, + S5M8767_REG_BUCK2CTRL, + S5M8767_REG_BUCK2DVS1, + S5M8767_REG_BUCK2DVS2, + S5M8767_REG_BUCK2DVS3, + S5M8767_REG_BUCK2DVS4, + S5M8767_REG_BUCK2DVS5, + S5M8767_REG_BUCK2DVS6, + S5M8767_REG_BUCK2DVS7, + S5M8767_REG_BUCK2DVS8, + S5M8767_REG_BUCK3CTRL, + S5M8767_REG_BUCK3DVS1, + S5M8767_REG_BUCK3DVS2, + S5M8767_REG_BUCK3DVS3, + S5M8767_REG_BUCK3DVS4, + S5M8767_REG_BUCK3DVS5, + S5M8767_REG_BUCK3DVS6, + S5M8767_REG_BUCK3DVS7, + S5M8767_REG_BUCK3DVS8, + S5M8767_REG_BUCK4CTRL, + S5M8767_REG_BUCK4DVS1, + S5M8767_REG_BUCK4DVS2, + S5M8767_REG_BUCK4DVS3, + S5M8767_REG_BUCK4DVS4, + S5M8767_REG_BUCK4DVS5, + S5M8767_REG_BUCK4DVS6, + S5M8767_REG_BUCK4DVS7, + S5M8767_REG_BUCK4DVS8, + S5M8767_REG_BUCK5CTRL1, + S5M8767_REG_BUCK5CTRL2, + S5M8767_REG_BUCK5CTRL3, + S5M8767_REG_BUCK5CTRL4, + S5M8767_REG_BUCK5CTRL5, + S5M8767_REG_BUCK6CTRL1, + S5M8767_REG_BUCK6CTRL2, + S5M8767_REG_BUCK7CTRL1, + S5M8767_REG_BUCK7CTRL2, + S5M8767_REG_BUCK8CTRL1, + S5M8767_REG_BUCK8CTRL2, + S5M8767_REG_BUCK9CTRL1, + S5M8767_REG_BUCK9CTRL2, + S5M8767_REG_LDO1CTRL, + S5M8767_REG_LDO2_1CTRL, + S5M8767_REG_LDO2_2CTRL, + S5M8767_REG_LDO2_3CTRL, + S5M8767_REG_LDO2_4CTRL, + S5M8767_REG_LDO3CTRL, + S5M8767_REG_LDO4CTRL, + S5M8767_REG_LDO5CTRL, + S5M8767_REG_LDO6CTRL, + S5M8767_REG_LDO7CTRL, + S5M8767_REG_LDO8CTRL, + S5M8767_REG_LDO9CTRL, + S5M8767_REG_LDO10CTRL, + S5M8767_REG_LDO11CTRL, + S5M8767_REG_LDO12CTRL, + S5M8767_REG_LDO13CTRL, + S5M8767_REG_LDO14CTRL, + S5M8767_REG_LDO15CTRL, + S5M8767_REG_LDO16CTRL, + S5M8767_REG_LDO17CTRL, + S5M8767_REG_LDO18CTRL, + S5M8767_REG_LDO19CTRL, + S5M8767_REG_LDO20CTRL, + S5M8767_REG_LDO21CTRL, + S5M8767_REG_LDO22CTRL, + S5M8767_REG_LDO23CTRL, + S5M8767_REG_LDO24CTRL, + S5M8767_REG_LDO25CTRL, + S5M8767_REG_LDO26CTRL, + S5M8767_REG_LDO27CTRL, + S5M8767_REG_LDO28CTRL, +}; + +/* S5M8763 registers */ +enum s5m8763_reg { + S5M8763_REG_IRQ1, + S5M8763_REG_IRQ2, + S5M8763_REG_IRQ3, + S5M8763_REG_IRQ4, + S5M8763_REG_IRQM1, + S5M8763_REG_IRQM2, + S5M8763_REG_IRQM3, + S5M8763_REG_IRQM4, + S5M8763_REG_STATUS1, + S5M8763_REG_STATUS2, + S5M8763_REG_STATUSM1, + S5M8763_REG_STATUSM2, + S5M8763_REG_CHGR1, + S5M8763_REG_CHGR2, + S5M8763_REG_LDO_ACTIVE_DISCHARGE1, + S5M8763_REG_LDO_ACTIVE_DISCHARGE2, + S5M8763_REG_BUCK_ACTIVE_DISCHARGE3, + S5M8763_REG_ONOFF1, + S5M8763_REG_ONOFF2, + S5M8763_REG_ONOFF3, + S5M8763_REG_ONOFF4, + S5M8763_REG_BUCK1_VOLTAGE1, + S5M8763_REG_BUCK1_VOLTAGE2, + S5M8763_REG_BUCK1_VOLTAGE3, + S5M8763_REG_BUCK1_VOLTAGE4, + S5M8763_REG_BUCK2_VOLTAGE1, + S5M8763_REG_BUCK2_VOLTAGE2, + S5M8763_REG_BUCK3, + S5M8763_REG_BUCK4, + S5M8763_REG_LDO1_LDO2, + S5M8763_REG_LDO3, + S5M8763_REG_LDO4, + S5M8763_REG_LDO5, + S5M8763_REG_LDO6, + S5M8763_REG_LDO7, + S5M8763_REG_LDO7_LDO8, + S5M8763_REG_LDO9_LDO10, + S5M8763_REG_LDO11, + S5M8763_REG_LDO12, + S5M8763_REG_LDO13, + S5M8763_REG_LDO14, + S5M8763_REG_LDO15, + S5M8763_REG_LDO16, + S5M8763_REG_BKCHR, + S5M8763_REG_LBCNFG1, + S5M8763_REG_LBCNFG2, +}; + +enum s5m8767_irq { + S5M8767_IRQ_PWRR, + S5M8767_IRQ_PWRF, + S5M8767_IRQ_PWR1S, + S5M8767_IRQ_JIGR, + S5M8767_IRQ_JIGF, + S5M8767_IRQ_LOWBAT2, + S5M8767_IRQ_LOWBAT1, + + S5M8767_IRQ_MRB, + S5M8767_IRQ_DVSOK2, + S5M8767_IRQ_DVSOK3, + S5M8767_IRQ_DVSOK4, + + S5M8767_IRQ_RTC60S, + S5M8767_IRQ_RTCA1, + S5M8767_IRQ_RTCA2, + S5M8767_IRQ_SMPL, + S5M8767_IRQ_RTC1S, + S5M8767_IRQ_WTSR, + + S5M8767_IRQ_NR, +}; + +#define S5M8767_IRQ_PWRR_MASK (1 << 0) +#define S5M8767_IRQ_PWRF_MASK (1 << 1) +#define S5M8767_IRQ_PWR1S_MASK (1 << 3) +#define S5M8767_IRQ_JIGR_MASK (1 << 4) +#define S5M8767_IRQ_JIGF_MASK (1 << 5) +#define S5M8767_IRQ_LOWBAT2_MASK (1 << 6) +#define S5M8767_IRQ_LOWBAT1_MASK (1 << 7) + +#define S5M8767_IRQ_MRB_MASK (1 << 2) +#define S5M8767_IRQ_DVSOK2_MASK (1 << 3) +#define S5M8767_IRQ_DVSOK3_MASK (1 << 4) +#define S5M8767_IRQ_DVSOK4_MASK (1 << 5) + +#define S5M8767_IRQ_RTC60S_MASK (1 << 0) +#define S5M8767_IRQ_RTCA1_MASK (1 << 1) +#define S5M8767_IRQ_RTCA2_MASK (1 << 2) +#define S5M8767_IRQ_SMPL_MASK (1 << 3) +#define S5M8767_IRQ_RTC1S_MASK (1 << 4) +#define S5M8767_IRQ_WTSR_MASK (1 << 5) + +enum s5m8763_irq { + S5M8763_IRQ_DCINF, + S5M8763_IRQ_DCINR, + S5M8763_IRQ_JIGF, + S5M8763_IRQ_JIGR, + S5M8763_IRQ_PWRONF, + S5M8763_IRQ_PWRONR, + + S5M8763_IRQ_WTSREVNT, + S5M8763_IRQ_SMPLEVNT, + S5M8763_IRQ_ALARM1, + S5M8763_IRQ_ALARM0, + + S5M8763_IRQ_ONKEY1S, + S5M8763_IRQ_TOPOFFR, + S5M8763_IRQ_DCINOVPR, + S5M8763_IRQ_CHGRSTF, + S5M8763_IRQ_DONER, + S5M8763_IRQ_CHGFAULT, + + S5M8763_IRQ_LOBAT1, + S5M8763_IRQ_LOBAT2, + + S5M8763_IRQ_NR, +}; + +#define S5M8763_IRQ_DCINF_MASK (1 << 2) +#define S5M8763_IRQ_DCINR_MASK (1 << 3) +#define S5M8763_IRQ_JIGF_MASK (1 << 4) +#define S5M8763_IRQ_JIGR_MASK (1 << 5) +#define S5M8763_IRQ_PWRONF_MASK (1 << 6) +#define S5M8763_IRQ_PWRONR_MASK (1 << 7) + +#define S5M8763_IRQ_WTSREVNT_MASK (1 << 0) +#define S5M8763_IRQ_SMPLEVNT_MASK (1 << 1) +#define S5M8763_IRQ_ALARM1_MASK (1 << 2) +#define S5M8763_IRQ_ALARM0_MASK (1 << 3) + +#define S5M8763_IRQ_ONKEY1S_MASK (1 << 0) +#define S5M8763_IRQ_TOPOFFR_MASK (1 << 2) +#define S5M8763_IRQ_DCINOVPR_MASK (1 << 3) +#define S5M8763_IRQ_CHGRSTF_MASK (1 << 4) +#define S5M8763_IRQ_DONER_MASK (1 << 5) +#define S5M8763_IRQ_CHGFAULT_MASK (1 << 7) + +#define S5M8763_IRQ_LOBAT1_MASK (1 << 0) +#define S5M8763_IRQ_LOBAT2_MASK (1 << 1) + +#define S5M8763_ENRAMP (1 << 4) + +/** + * struct s5m87xx_dev - s5m87xx master device for sub-drivers + * @dev: master device of the chip (can be used to access platform data) + * @i2c: i2c client private data for regulator + * @rtc: i2c client private data for rtc + * @iolock: mutex for serializing io access + * @irqlock: mutex for buslock + * @irq_base: base IRQ number for s5m87xx, required for IRQs + * @irq: generic IRQ number for s5m87xx + * @ono: power onoff IRQ number for s5m87xx + * @irq_masks_cur: currently active value + * @irq_masks_cache: cached hardware value + * @type: indicate which s5m87xx "variant" is used + */ +struct s5m87xx_dev { + struct device *dev; + struct regmap *regmap; + struct i2c_client *i2c; + struct i2c_client *rtc; + struct mutex iolock; + struct mutex irqlock; + + int device_type; + int irq_base; + int irq; + int ono; + u8 irq_masks_cur[NUM_IRQ_REGS]; + u8 irq_masks_cache[NUM_IRQ_REGS]; + int type; + bool wakeup; +}; + +int s5m_irq_init(struct s5m87xx_dev *s5m87xx); +void s5m_irq_exit(struct s5m87xx_dev *s5m87xx); +int s5m_irq_resume(struct s5m87xx_dev *s5m87xx); + +extern int s5m_reg_read(struct s5m87xx_dev *s5m87xx, u8 reg, void *dest); +extern int s5m_bulk_read(struct s5m87xx_dev *s5m87xx, u8 reg, int count, u8 *buf); +extern int s5m_reg_write(struct s5m87xx_dev *s5m87xx, u8 reg, u8 value); +extern int s5m_bulk_write(struct s5m87xx_dev *s5m87xx, u8 reg, int count, u8 *buf); +extern int s5m_reg_update(struct s5m87xx_dev *s5m87xx, u8 reg, u8 val, u8 mask); + +struct s5m_platform_data { + struct s5m_regulator_data *regulators; + int device_type; + int num_regulators; + + int irq_base; + int (*cfg_pmic_irq)(void); + + int ono; + bool wakeup; + bool buck_voltage_lock; + + int buck_gpios[3]; + int buck2_voltage[8]; + bool buck2_gpiodvs; + int buck3_voltage[8]; + bool buck3_gpiodvs; + int buck4_voltage[8]; + bool buck4_gpiodvs; + + int buck_set1; + int buck_set2; + int buck_set3; + int buck2_enable; + int buck3_enable; + int buck4_enable; + int buck_default_idx; + int buck2_default_idx; + int buck3_default_idx; + int buck4_default_idx; + + int buck_ramp_delay; + bool buck2_ramp_enable; + bool buck3_ramp_enable; + bool buck4_ramp_enable; +}; + +#endif /* __LINUX_MFD_S5M_CORE_H */ diff --git a/include/linux/mfd/s5m87xx/s5m-pmic.h b/include/linux/mfd/s5m87xx/s5m-pmic.h new file mode 100644 index 000000000000..a72a5d27e62e --- /dev/null +++ b/include/linux/mfd/s5m87xx/s5m-pmic.h @@ -0,0 +1,100 @@ +/* s5m87xx.h + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __LINUX_MFD_S5M_PMIC_H +#define __LINUX_MFD_S5M_PMIC_H + +#include + +/* S5M8767 regulator ids */ +enum s5m8767_regulators { + S5M8767_LDO1, + S5M8767_LDO2, + S5M8767_LDO3, + S5M8767_LDO4, + S5M8767_LDO5, + S5M8767_LDO6, + S5M8767_LDO7, + S5M8767_LDO8, + S5M8767_LDO9, + S5M8767_LDO10, + S5M8767_LDO11, + S5M8767_LDO12, + S5M8767_LDO13, + S5M8767_LDO14, + S5M8767_LDO15, + S5M8767_LDO16, + S5M8767_LDO17, + S5M8767_LDO18, + S5M8767_LDO19, + S5M8767_LDO20, + S5M8767_LDO21, + S5M8767_LDO22, + S5M8767_LDO23, + S5M8767_LDO24, + S5M8767_LDO25, + S5M8767_LDO26, + S5M8767_LDO27, + S5M8767_LDO28, + S5M8767_BUCK1, + S5M8767_BUCK2, + S5M8767_BUCK3, + S5M8767_BUCK4, + S5M8767_BUCK5, + S5M8767_BUCK6, + S5M8767_BUCK7, + S5M8767_BUCK8, + S5M8767_BUCK9, + S5M8767_AP_EN32KHZ, + S5M8767_CP_EN32KHZ, + + S5M8767_REG_MAX, +}; + +/* S5M8763 regulator ids */ +enum s5m8763_regulators { + S5M8763_LDO1, + S5M8763_LDO2, + S5M8763_LDO3, + S5M8763_LDO4, + S5M8763_LDO5, + S5M8763_LDO6, + S5M8763_LDO7, + S5M8763_LDO8, + S5M8763_LDO9, + S5M8763_LDO10, + S5M8763_LDO11, + S5M8763_LDO12, + S5M8763_LDO13, + S5M8763_LDO14, + S5M8763_LDO15, + S5M8763_LDO16, + S5M8763_BUCK1, + S5M8763_BUCK2, + S5M8763_BUCK3, + S5M8763_BUCK4, + S5M8763_AP_EN32KHZ, + S5M8763_CP_EN32KHZ, + S5M8763_ENCHGVI, + S5M8763_ESAFEUSB1, + S5M8763_ESAFEUSB2, +}; + +/** + * s5m87xx_regulator_data - regulator data + * @id: regulator id + * @initdata: regulator init data (contraints, supplies, ...) + */ +struct s5m_regulator_data { + int id; + struct regulator_init_data *initdata; +}; + +#endif /* __LINUX_MFD_S5M_PMIC_H */ diff --git a/include/linux/mfd/s5m87xx/s5m-rtc.h b/include/linux/mfd/s5m87xx/s5m-rtc.h new file mode 100644 index 000000000000..6ce8da264cec --- /dev/null +++ b/include/linux/mfd/s5m87xx/s5m-rtc.h @@ -0,0 +1,84 @@ +/* + * s5m-rtc.h + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __LINUX_MFD_S5M_RTC_H +#define __LINUX_MFD_S5M_RTC_H + +enum s5m87xx_rtc_reg { + S5M87XX_RTC_SEC, + S5M87XX_RTC_MIN, + S5M87XX_RTC_HOUR, + S5M87XX_RTC_WEEKDAY, + S5M87XX_RTC_DATE, + S5M87XX_RTC_MONTH, + S5M87XX_RTC_YEAR1, + S5M87XX_RTC_YEAR2, + S5M87XX_ALARM0_SEC, + S5M87XX_ALARM0_MIN, + S5M87XX_ALARM0_HOUR, + S5M87XX_ALARM0_WEEKDAY, + S5M87XX_ALARM0_DATE, + S5M87XX_ALARM0_MONTH, + S5M87XX_ALARM0_YEAR1, + S5M87XX_ALARM0_YEAR2, + S5M87XX_ALARM1_SEC, + S5M87XX_ALARM1_MIN, + S5M87XX_ALARM1_HOUR, + S5M87XX_ALARM1_WEEKDAY, + S5M87XX_ALARM1_DATE, + S5M87XX_ALARM1_MONTH, + S5M87XX_ALARM1_YEAR1, + S5M87XX_ALARM1_YEAR2, + S5M87XX_ALARM0_CONF, + S5M87XX_ALARM1_CONF, + S5M87XX_RTC_STATUS, + S5M87XX_WTSR_SMPL_CNTL, + S5M87XX_RTC_UDR_CON, +}; + +#define RTC_I2C_ADDR (0x0C >> 1) + +#define HOUR_12 (1 << 7) +#define HOUR_AMPM (1 << 6) +#define HOUR_PM (1 << 5) +#define ALARM0_STATUS (1 << 1) +#define ALARM1_STATUS (1 << 2) +#define UPDATE_AD (1 << 0) + +/* RTC Control Register */ +#define BCD_EN_SHIFT 0 +#define BCD_EN_MASK (1 << BCD_EN_SHIFT) +#define MODEL24_SHIFT 1 +#define MODEL24_MASK (1 << MODEL24_SHIFT) +/* RTC Update Register1 */ +#define RTC_UDR_SHIFT 0 +#define RTC_UDR_MASK (1 << RTC_UDR_SHIFT) +/* RTC Hour register */ +#define HOUR_PM_SHIFT 6 +#define HOUR_PM_MASK (1 << HOUR_PM_SHIFT) +/* RTC Alarm Enable */ +#define ALARM_ENABLE_SHIFT 7 +#define ALARM_ENABLE_MASK (1 << ALARM_ENABLE_SHIFT) + +enum { + RTC_SEC = 0, + RTC_MIN, + RTC_HOUR, + RTC_WEEKDAY, + RTC_DATE, + RTC_MONTH, + RTC_YEAR1, + RTC_YEAR2, +}; + +#endif /* __LINUX_MFD_S5M_RTC_H */ -- cgit v1.2.3 From ba74e80ebaf8209cb553eb2195b26302270cfa42 Mon Sep 17 00:00:00 2001 From: Kevin Liu Date: Wed, 4 Jan 2012 15:14:24 +0800 Subject: mfd: Add pm ops to max8925 Signed-off-by: Kevin Liu Signed-off-by: Haojian Zhuang Signed-off-by: Samuel Ortiz --- include/linux/mfd/max8925.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/max8925.h b/include/linux/mfd/max8925.h index 5259dfe8c585..daaba00f0bc5 100644 --- a/include/linux/mfd/max8925.h +++ b/include/linux/mfd/max8925.h @@ -206,6 +206,8 @@ struct max8925_chip { int irq_base; int core_irq; int tsc_irq; + + unsigned int wakeup_flag; }; struct max8925_backlight_pdata { -- cgit v1.2.3 From 0e8caaceff160ad821c83d798fc03812cb810560 Mon Sep 17 00:00:00 2001 From: Tomasz Stanislawski Date: Wed, 10 Aug 2011 10:37:47 -0300 Subject: [media] v4l: add support for selection api This patch introduces new api for a precise control of cropping and composing features for video devices. The new ioctls are VIDIOC_S_SELECTION and VIDIOC_G_SELECTION. Signed-off-by: Tomasz Stanislawski Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab --- include/linux/videodev2.h | 46 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 46 insertions(+) (limited to 'include/linux') diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index b2e1331ca76b..012a29604522 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -743,6 +743,48 @@ struct v4l2_crop { struct v4l2_rect c; }; +/* Hints for adjustments of selection rectangle */ +#define V4L2_SEL_FLAG_GE 0x00000001 +#define V4L2_SEL_FLAG_LE 0x00000002 + +/* Selection targets */ + +/* current cropping area */ +#define V4L2_SEL_TGT_CROP_ACTIVE 0 +/* default cropping area */ +#define V4L2_SEL_TGT_CROP_DEFAULT 1 +/* cropping bounds */ +#define V4L2_SEL_TGT_CROP_BOUNDS 2 +/* current composing area */ +#define V4L2_SEL_TGT_COMPOSE_ACTIVE 256 +/* default composing area */ +#define V4L2_SEL_TGT_COMPOSE_DEFAULT 257 +/* composing bounds */ +#define V4L2_SEL_TGT_COMPOSE_BOUNDS 258 +/* current composing area plus all padding pixels */ +#define V4L2_SEL_TGT_COMPOSE_PADDED 259 + +/** + * struct v4l2_selection - selection info + * @type: buffer type (do not use *_MPLANE types) + * @target: selection target, used to choose one of possible rectangles + * @flags: constraints flags + * @r: coordinates of selection window + * @reserved: for future use, rounds structure size to 64 bytes, set to zero + * + * Hardware may use multiple helper window to process a video stream. + * The structure is used to exchange this selection areas between + * an application and a driver. + */ +struct v4l2_selection { + __u32 type; + __u32 target; + __u32 flags; + struct v4l2_rect r; + __u32 reserved[9]; +}; + + /* * A N A L O G V I D E O S T A N D A R D */ @@ -2259,6 +2301,10 @@ struct v4l2_create_buffers { #define VIDIOC_CREATE_BUFS _IOWR('V', 92, struct v4l2_create_buffers) #define VIDIOC_PREPARE_BUF _IOWR('V', 93, struct v4l2_buffer) +/* Experimental selection API */ +#define VIDIOC_G_SELECTION _IOWR('V', 94, struct v4l2_selection) +#define VIDIOC_S_SELECTION _IOWR('V', 95, struct v4l2_selection) + /* Reminder: when adding new ioctls please add support for them to drivers/media/video/v4l2-compat-ioctl32.c as well! */ -- cgit v1.2.3 From e0c2a9aa1e68455dc3439e95d85cabcaff073666 Mon Sep 17 00:00:00 2001 From: David Teigland Date: Mon, 9 Jan 2012 17:18:05 -0500 Subject: GFS2: dlm based recovery coordination This new method of managing recovery is an alternative to the previous approach of using the userland gfs_controld. - use dlm slot numbers to assign journal id's - use dlm recovery callbacks to initiate journal recovery - use a dlm lock to determine the first node to mount fs - use a dlm lock to track journals that need recovery Signed-off-by: David Teigland Signed-off-by: Steven Whitehouse --- include/linux/gfs2_ondisk.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/gfs2_ondisk.h b/include/linux/gfs2_ondisk.h index 4f4462974c14..b148087f49a6 100644 --- a/include/linux/gfs2_ondisk.h +++ b/include/linux/gfs2_ondisk.h @@ -22,6 +22,8 @@ #define GFS2_LIVE_LOCK 1 #define GFS2_TRANS_LOCK 2 #define GFS2_RENAME_LOCK 3 +#define GFS2_CONTROL_LOCK 4 +#define GFS2_MOUNTED_LOCK 5 /* Format numbers for various metadata types */ -- cgit v1.2.3 From b1bd055d397e09f99dcef9b138ed104ff1812fcb Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Wed, 11 Jan 2012 16:27:11 +0100 Subject: block: Introduce blk_set_stacking_limits function Stacking driver queue limits are typically bounded exclusively by the capabilities of the low level devices, not by the stacking driver itself. This patch introduces blk_set_stacking_limits() which has more liberal metrics than the default queue limits function. This allows us to inherit topology parameters from bottom devices without manually tweaking the default limits in each driver prior to calling the stacking function. Since there is now a clear distinction between stacking and low-level devices, blk_set_default_limits() has been modified to carry the more conservative values that we used to manually set in blk_queue_make_request(). Signed-off-by: Martin K. Petersen Acked-by: Mike Snitzer Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 8bca04873f53..adc34133a56a 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -844,6 +844,7 @@ extern void blk_queue_io_min(struct request_queue *q, unsigned int min); extern void blk_limits_io_opt(struct queue_limits *limits, unsigned int opt); extern void blk_queue_io_opt(struct request_queue *q, unsigned int opt); extern void blk_set_default_limits(struct queue_limits *lim); +extern void blk_set_stacking_limits(struct queue_limits *lim); extern int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, sector_t offset); extern int bdev_stack_limits(struct queue_limits *t, struct block_device *bdev, -- cgit v1.2.3 From ef00f59c95fe6e002e7c6e3663cdea65e253f4cc Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Wed, 11 Jan 2012 16:29:31 +0100 Subject: block: Add BLKROTATIONAL ioctl Introduce an ioctl which permits applications to query whether a block device is rotational. Signed-off-by: Martin K. Petersen Signed-off-by: Jens Axboe --- include/linux/fs.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index e0bc4ffb8e7f..95dd911506f1 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -319,6 +319,7 @@ struct inodes_stat_t { #define BLKPBSZGET _IO(0x12,123) #define BLKDISCARDZEROES _IO(0x12,124) #define BLKSECDISCARD _IO(0x12,125) +#define BLKROTATIONAL _IO(0x12,126) #define BMAP_IOCTL 1 /* obsolete - kept for compatibility */ #define FIBMAP _IO(0x00,1) /* bmap access */ -- cgit v1.2.3 From fffe5d5aa05b4e69f79bc75a51c5ee0fc6203fa5 Mon Sep 17 00:00:00 2001 From: Qiang Liu Date: Tue, 8 Nov 2011 08:43:08 -0500 Subject: mmc: sd: Macro name cleanup for high speed dtr Add new macros for the high speed 50MHz case, rather than having a confusing reuse of the value for UHS SDR50, which is 100MHz. Reported-by: Aaron Lu Signed-off-by: Chris Ball --- include/linux/mmc/card.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index c8ef9bc54d50..2c9be29684cf 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -110,6 +110,7 @@ struct sd_ssr { struct sd_switch_caps { unsigned int hs_max_dtr; unsigned int uhs_max_dtr; +#define HIGH_SPEED_MAX_DTR 50000000 #define UHS_SDR104_MAX_DTR 208000000 #define UHS_SDR50_MAX_DTR 100000000 #define UHS_DDR50_MAX_DTR 50000000 @@ -117,11 +118,13 @@ struct sd_switch_caps { #define UHS_SDR12_MAX_DTR 25000000 unsigned int sd3_bus_mode; #define UHS_SDR12_BUS_SPEED 0 +#define HIGH_SPEED_BUS_SPEED 1 #define UHS_SDR25_BUS_SPEED 1 #define UHS_SDR50_BUS_SPEED 2 #define UHS_SDR104_BUS_SPEED 3 #define UHS_DDR50_BUS_SPEED 4 +#define SD_MODE_HIGH_SPEED (1 << HIGH_SPEED_BUS_SPEED) #define SD_MODE_UHS_SDR12 (1 << UHS_SDR12_BUS_SPEED) #define SD_MODE_UHS_SDR25 (1 << UHS_SDR25_BUS_SPEED) #define SD_MODE_UHS_SDR50 (1 << UHS_SDR50_BUS_SPEED) -- cgit v1.2.3 From df16219f365f7f5a2d88a6e123251d57255cca3f Mon Sep 17 00:00:00 2001 From: Giuseppe CAVALLARO Date: Fri, 4 Nov 2011 13:53:19 +0100 Subject: mmc: debugfs: expose the SDCLK frq in sys ios This patch is to expose the actual SDCLK frequency in /sys/kernel/debug/mmcX/ios entry. For example, if the max clk for a normal speed card is 20MHz this is reported in /sys/kernel/debug/mmcX/ios. Unfortunately the actual SDCLK frequency (i.e. Baseclock / divisor) is not reported at all: for example, in that case, on Arasan HC, it should be 48/4=12 (MHz). Signed-off-by: Giuseppe Cavallaro Acked-by: Adrian Hunter Signed-off-by: Chris Ball --- include/linux/mmc/host.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index a3ac9c48e5de..cea064f73514 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -323,6 +323,8 @@ struct mmc_host { struct fault_attr fail_mmc_request; #endif + unsigned int actual_clock; /* Actual HC clock rate */ + unsigned long private[0] ____cacheline_aligned; }; -- cgit v1.2.3 From 597dd9d79cfbbb1636d00a7fd0880355d9b20c41 Mon Sep 17 00:00:00 2001 From: Sujit Reddy Thumma Date: Mon, 14 Nov 2011 13:53:29 +0530 Subject: mmc: core: Use delayed work in clock gating framework Current clock gating framework disables the MCI clock as soon as the request is completed and enables it when a request arrives. This aggressive clock gating framework, when enabled, cause following issues: When there are back-to-back requests from the Queue layer, we unnecessarily end up disabling and enabling the clocks between these requests since 8MCLK clock cycles is a very short duration compared to the time delay between back to back requests reaching the MMC layer. This overhead can effect the overall performance depending on how long the clock enable and disable calls take which is platform dependent. For example on some platforms we can have clock control not on the local processor, but on a different subsystem and the time taken to perform the clock enable/disable can add significant overhead. Also if the host controller driver decides to disable the host clock too when mmc_set_ios function is called with ios.clock=0, it adds additional delay and it is highly possible that the next request had already arrived and unnecessarily blocked in enabling the clocks. This is seen frequently when the processor is executing at high speeds and in multi-core platforms thus reduces the overall throughput compared to if clock gating is disabled. Fix this by delaying turning off the clocks by posting request on delayed workqueue. Also cancel the unscheduled pending work, if any, when there is access to card. sysfs entry is provided to tune the delay as needed, default value set to 200ms. Signed-off-by: Sujit Reddy Thumma Acked-by: Linus Walleij Signed-off-by: Chris Ball --- include/linux/mmc/host.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index cea064f73514..706f72279a17 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -253,10 +253,12 @@ struct mmc_host { int clk_requests; /* internal reference counter */ unsigned int clk_delay; /* number of MCI clk hold cycles */ bool clk_gated; /* clock gated */ - struct work_struct clk_gate_work; /* delayed clock gate */ + struct delayed_work clk_gate_work; /* delayed clock gate */ unsigned int clk_old; /* old clock value cache */ spinlock_t clk_lock; /* lock for clk fields */ struct mutex clk_gate_mutex; /* mutex for clock gating */ + struct device_attribute clkgate_delay_attr; + unsigned long clkgate_delay; #endif /* host specific block data */ -- cgit v1.2.3 From a303c5319c8e6ab0e744ebca118da8420043b2c3 Mon Sep 17 00:00:00 2001 From: Philip Rakity Date: Mon, 14 Nov 2011 19:14:38 -0800 Subject: mmc: sdio: support SDIO UHS cards This patch adds support for sdio UHS cards per the version 3.0 spec. UHS mode is only enabled for version 3.0 cards when both the host and the controller support UHS modes. 1.8v signaling support is removed if both the card and the host do not support UHS. This is done to maintain compatibility and some system/card combinations break when 1.8v signaling is enabled when the host does not support UHS. Signed-off-by: Philip Rakity Signed-off-by: Aaron Lu Reviewed-by: Arindam Nath Tested-by: Bing Zhao Signed-off-by: Chris Ball --- include/linux/mmc/card.h | 4 +++- include/linux/mmc/sdio.h | 29 +++++++++++++++++++++++++++-- 2 files changed, 30 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 2c9be29684cf..534974c3ef0c 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -367,7 +367,8 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data) #define mmc_card_highspeed(c) ((c)->state & MMC_STATE_HIGHSPEED) #define mmc_card_blockaddr(c) ((c)->state & MMC_STATE_BLOCKADDR) #define mmc_card_ddr_mode(c) ((c)->state & MMC_STATE_HIGHSPEED_DDR) -#define mmc_sd_card_uhs(c) ((c)->state & MMC_STATE_ULTRAHIGHSPEED) +#define mmc_card_uhs(c) ((c)->state & MMC_STATE_ULTRAHIGHSPEED) +#define mmc_sd_card_uhs(c) ((c)->state & MMC_STATE_ULTRAHIGHSPEED) #define mmc_card_ext_capacity(c) ((c)->state & MMC_CARD_SDXC) #define mmc_card_set_present(c) ((c)->state |= MMC_STATE_PRESENT) @@ -375,6 +376,7 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data) #define mmc_card_set_highspeed(c) ((c)->state |= MMC_STATE_HIGHSPEED) #define mmc_card_set_blockaddr(c) ((c)->state |= MMC_STATE_BLOCKADDR) #define mmc_card_set_ddr_mode(c) ((c)->state |= MMC_STATE_HIGHSPEED_DDR) +#define mmc_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED) #define mmc_sd_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED) #define mmc_card_set_ext_capacity(c) ((c)->state |= MMC_CARD_SDXC) diff --git a/include/linux/mmc/sdio.h b/include/linux/mmc/sdio.h index e0b1123497b9..c9fe66c58f8f 100644 --- a/include/linux/mmc/sdio.h +++ b/include/linux/mmc/sdio.h @@ -38,6 +38,7 @@ * [8:0] Byte/block count */ +#define R4_18V_PRESENT (1<<24) #define R4_MEMORY_PRESENT (1 << 27) /* @@ -85,6 +86,7 @@ #define SDIO_SD_REV_1_01 0 /* SD Physical Spec Version 1.01 */ #define SDIO_SD_REV_1_10 1 /* SD Physical Spec Version 1.10 */ #define SDIO_SD_REV_2_00 2 /* SD Physical Spec Version 2.00 */ +#define SDIO_SD_REV_3_00 3 /* SD Physical Spev Version 3.00 */ #define SDIO_CCCR_IOEx 0x02 #define SDIO_CCCR_IORx 0x03 @@ -134,8 +136,31 @@ #define SDIO_CCCR_SPEED 0x13 #define SDIO_SPEED_SHS 0x01 /* Supports High-Speed mode */ -#define SDIO_SPEED_EHS 0x02 /* Enable High-Speed mode */ - +#define SDIO_SPEED_BSS_SHIFT 1 +#define SDIO_SPEED_BSS_MASK (7< Date: Mon, 14 Nov 2011 12:02:28 +0100 Subject: mmc: mmci: add capabilities2 for MMC_CAP2 Signed-off-by: Per Forlin Signed-off-by: Chris Ball --- include/linux/amba/mmci.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/amba/mmci.h b/include/linux/amba/mmci.h index 21114810c7c0..0101e9c17fa1 100644 --- a/include/linux/amba/mmci.h +++ b/include/linux/amba/mmci.h @@ -30,6 +30,7 @@ struct dma_chan; * @cd_invert: true if the gpio_cd pin value is active low * @capabilities: the capabilities of the block as implemented in * this platform, signify anything MMC_CAP_* from mmc/host.h + * @capabilities2: more capabilities, MMC_CAP2_* from mmc/host.h * @dma_filter: function used to select an appropriate RX and TX * DMA channel to be used for DMA, if and only if you're deploying the * generic DMA engine @@ -52,6 +53,7 @@ struct mmci_platform_data { int gpio_cd; bool cd_invert; unsigned long capabilities; + unsigned long capabilities2; bool (*dma_filter)(struct dma_chan *chan, void *filter_param); void *dma_rx_param; void *dma_tx_param; -- cgit v1.2.3 From d30495048892980e5d453328d1cc9343b3f7e917 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Mon, 28 Nov 2011 16:22:00 +0200 Subject: mmc: allow upper layers to know immediately if card has been removed Add a function mmc_detect_card_removed() which upper layers can use to determine immediately if a card has been removed. This function should be called after an I/O request fails so that all queued I/O requests can be errored out immediately instead of waiting for the card device to be removed. Signed-off-by: Adrian Hunter Acked-by: Sujit Reddy Thumma Signed-off-by: Chris Ball --- include/linux/mmc/card.h | 3 +++ include/linux/mmc/core.h | 2 ++ include/linux/mmc/host.h | 1 + 3 files changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 534974c3ef0c..6402d9224d6a 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -209,6 +209,7 @@ struct mmc_card { #define MMC_STATE_HIGHSPEED_DDR (1<<4) /* card is in high speed mode */ #define MMC_STATE_ULTRAHIGHSPEED (1<<5) /* card is in ultra high speed mode */ #define MMC_CARD_SDXC (1<<6) /* card is SDXC */ +#define MMC_CARD_REMOVED (1<<7) /* card has been removed */ unsigned int quirks; /* card quirks */ #define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0 writes outside of the VS CCCR range */ #define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1) /* use func->cur_blksize */ @@ -370,6 +371,7 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data) #define mmc_card_uhs(c) ((c)->state & MMC_STATE_ULTRAHIGHSPEED) #define mmc_sd_card_uhs(c) ((c)->state & MMC_STATE_ULTRAHIGHSPEED) #define mmc_card_ext_capacity(c) ((c)->state & MMC_CARD_SDXC) +#define mmc_card_removed(c) ((c) && ((c)->state & MMC_CARD_REMOVED)) #define mmc_card_set_present(c) ((c)->state |= MMC_STATE_PRESENT) #define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY) @@ -379,6 +381,7 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data) #define mmc_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED) #define mmc_sd_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED) #define mmc_card_set_ext_capacity(c) ((c)->state |= MMC_CARD_SDXC) +#define mmc_card_set_removed(c) ((c)->state |= MMC_CARD_REMOVED) /* * Quirk add/remove for MMC products. diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h index 174a844a5dda..87a976cc5654 100644 --- a/include/linux/mmc/core.h +++ b/include/linux/mmc/core.h @@ -180,6 +180,8 @@ extern int mmc_try_claim_host(struct mmc_host *host); extern int mmc_flush_cache(struct mmc_card *); +extern int mmc_detect_card_removed(struct mmc_host *host); + /** * mmc_claim_host - exclusively claim a host * @host: mmc host to claim diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 706f72279a17..9a03d0335745 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -299,6 +299,7 @@ struct mmc_host { int claim_cnt; /* "claim" nesting count */ struct delayed_work detect; + int detect_change; /* card detect flag */ const struct mmc_bus_ops *bus_ops; /* current bus driver */ unsigned int bus_refs; /* reference counter */ -- cgit v1.2.3 From add710eaa88606de8ba98a014d37178579e6dbaf Mon Sep 17 00:00:00 2001 From: Johan Rudholm Date: Fri, 2 Dec 2011 08:51:06 +0100 Subject: mmc: boot partition ro lock support Enable boot partitions to be read-only locked until next power on via a sysfs entry. There will be one sysfs entry for each boot partition: /sys/block/mmcblkXbootY/ro_lock_until_next_power_on Each boot partition is locked by writing 1 to its file. Signed-off-by: Johan Rudholm Signed-off-by: John Beckett Signed-off-by: Chris Ball --- include/linux/mmc/card.h | 10 +++++++++- include/linux/mmc/mmc.h | 6 ++++++ 2 files changed, 15 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 6402d9224d6a..9478a6bf1bb1 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -71,6 +71,8 @@ struct mmc_ext_csd { bool hpi_en; /* HPI enablebit */ bool hpi; /* HPI support bit */ unsigned int hpi_cmd; /* cmd used as HPI */ + unsigned int boot_ro_lock; /* ro lock support */ + bool boot_ro_lockable; u8 raw_partition_support; /* 160 */ u8 raw_erased_mem_count; /* 181 */ u8 raw_ext_csd_structure; /* 194 */ @@ -187,6 +189,10 @@ struct mmc_part { unsigned int part_cfg; /* partition type */ char name[MAX_MMC_PART_NAME_LEN]; bool force_ro; /* to make boot parts RO by default */ + unsigned int area_type; +#define MMC_BLK_DATA_AREA_MAIN (1<<0) +#define MMC_BLK_DATA_AREA_BOOT (1<<1) +#define MMC_BLK_DATA_AREA_GP (1<<2) }; /* @@ -265,12 +271,14 @@ struct mmc_card { * This function fill contents in mmc_part. */ static inline void mmc_part_add(struct mmc_card *card, unsigned int size, - unsigned int part_cfg, char *name, int idx, bool ro) + unsigned int part_cfg, char *name, int idx, bool ro, + int area_type) { card->part[card->nr_parts].size = size; card->part[card->nr_parts].part_cfg = part_cfg; sprintf(card->part[card->nr_parts].name, name, idx); card->part[card->nr_parts].force_ro = ro; + card->part[card->nr_parts].area_type = area_type; card->nr_parts++; } diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index 0e7135697d11..665548e639e8 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -280,6 +280,7 @@ struct _mmc_csd { #define EXT_CSD_RST_N_FUNCTION 162 /* R/W */ #define EXT_CSD_SANITIZE_START 165 /* W */ #define EXT_CSD_WR_REL_PARAM 166 /* RO */ +#define EXT_CSD_BOOT_WP 173 /* R/W */ #define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */ #define EXT_CSD_PART_CONFIG 179 /* R/W */ #define EXT_CSD_ERASED_MEM_CONT 181 /* RO */ @@ -321,6 +322,11 @@ struct _mmc_csd { #define EXT_CSD_WR_REL_PARAM_EN (1<<2) +#define EXT_CSD_BOOT_WP_B_PWR_WP_DIS (0x40) +#define EXT_CSD_BOOT_WP_B_PERM_WP_DIS (0x10) +#define EXT_CSD_BOOT_WP_B_PERM_WP_EN (0x04) +#define EXT_CSD_BOOT_WP_B_PWR_WP_EN (0x01) + #define EXT_CSD_PART_CONFIG_ACC_MASK (0x7) #define EXT_CSD_PART_CONFIG_ACC_BOOT0 (0x1) #define EXT_CSD_PART_CONFIG_ACC_GP0 (0x4) -- cgit v1.2.3 From 4f408cc67a0613f969d1e02fff6de74d31a29fb3 Mon Sep 17 00:00:00 2001 From: Seungwon Jeon Date: Fri, 9 Dec 2011 14:55:52 +0900 Subject: mmc: dw_mmc: Add more capabilities field This patch adds another capabilities field for MMC_CAPS2_XXX. Signed-off-by: Seungwon Jeon Signed-off-by: Chris Ball --- include/linux/mmc/dw_mmc.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h index 6dc9b80568a0..e8779c6d1759 100644 --- a/include/linux/mmc/dw_mmc.h +++ b/include/linux/mmc/dw_mmc.h @@ -214,6 +214,7 @@ struct dw_mci_board { unsigned int bus_hz; /* Bus speed */ unsigned int caps; /* Capabilities */ + unsigned int caps2; /* More capabilities */ /* * Override fifo depth. If 0, autodetect it from the FIFOTH register, * but note that this may not be reliable after a bootloader has used -- cgit v1.2.3 From b67e198073b2d2f16572f5fa77553fec14775f69 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Sun, 25 Dec 2011 20:40:03 -0500 Subject: mmc: add a card hotplug handler context SD/MMC controllers provide different card insertion and removal detection methods. On some of them the controller itself issues an interrupt, on others polling is used, on yet others auxiliary means are used for this purpose, e.g., a GPIO IRQ. Further, on some systems one of those methods can be chosen at driver probing time and configured in software. E.g., on some systems the SD/MMC controller card hot-plug detection pin can be configured either as a respective controller functions, or an IRQ-capable GPIO. To support such flexible configurations a card hot-plug context is added by this patch. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Chris Ball --- include/linux/mmc/host.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 9a03d0335745..742f0e102e1e 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -167,6 +167,11 @@ struct mmc_async_req { int (*err_check) (struct mmc_card *, struct mmc_async_req *); }; +struct mmc_hotplug { + unsigned int irq; + void *handler_priv; +}; + struct mmc_host { struct device *parent; struct device class_dev; @@ -300,6 +305,7 @@ struct mmc_host { struct delayed_work detect; int detect_change; /* card detect flag */ + struct mmc_hotplug hotplug; const struct mmc_bus_ops *bus_ops; /* current bus driver */ unsigned int bus_refs; /* reference counter */ -- cgit v1.2.3 From 349ab52446772a359bc7e7699cae3880d48fa5c9 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Sun, 25 Dec 2011 21:36:02 +0100 Subject: mmc: add a generic GPIO card-detect helper This patch adds a primitive helper to support card hotplug detection on platforms, where a GPIO, capable of producing interrupts, is used for detection of card-insertion and -removal events. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Chris Ball --- include/linux/mmc/cd-gpio.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) create mode 100644 include/linux/mmc/cd-gpio.h (limited to 'include/linux') diff --git a/include/linux/mmc/cd-gpio.h b/include/linux/mmc/cd-gpio.h new file mode 100644 index 000000000000..a8e469783318 --- /dev/null +++ b/include/linux/mmc/cd-gpio.h @@ -0,0 +1,19 @@ +/* + * Generic GPIO card-detect helper header + * + * Copyright (C) 2011, Guennadi Liakhovetski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef MMC_CD_GPIO_H +#define MMC_CD_GPIO_H + +struct mmc_host; +int mmc_cd_gpio_request(struct mmc_host *host, unsigned int gpio, + unsigned int irq, unsigned long flags); +void mmc_cd_gpio_free(struct mmc_host *host); + +#endif -- cgit v1.2.3 From 52c506f0bc72530fb786838e7ffd4f158a2e5c3a Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Tue, 27 Dec 2011 15:48:43 +0200 Subject: mmc: sdhci-pci: add platform data Add a means of getting platform data for the SDHCI PCI devices. The data is stored against the slot not the device in order to support multi-slot devices. The data allows platform-specific setup (such as getting GPIO numbers from firmware or setting up wl12xx for SDIO) to be done in platform support files instead of the sdhci-pci driver. Signed-off-by: Adrian Hunter Signed-off-by: Chris Ball --- include/linux/mmc/sdhci-pci-data.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 include/linux/mmc/sdhci-pci-data.h (limited to 'include/linux') diff --git a/include/linux/mmc/sdhci-pci-data.h b/include/linux/mmc/sdhci-pci-data.h new file mode 100644 index 000000000000..8959604a13d3 --- /dev/null +++ b/include/linux/mmc/sdhci-pci-data.h @@ -0,0 +1,18 @@ +#ifndef LINUX_MMC_SDHCI_PCI_DATA_H +#define LINUX_MMC_SDHCI_PCI_DATA_H + +struct pci_dev; + +struct sdhci_pci_data { + struct pci_dev *pdev; + int slotno; + int rst_n_gpio; /* Set to -EINVAL if unused */ + int cd_gpio; /* Set to -EINVAL if unused */ + int (*setup)(struct sdhci_pci_data *data); + void (*cleanup)(struct sdhci_pci_data *data); +}; + +extern struct sdhci_pci_data *(*sdhci_pci_get_data)(struct pci_dev *pdev, + int slotno); + +#endif -- cgit v1.2.3 From e2a0a5829c4069ee4a0f28c7301187ffaba91a46 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Tue, 27 Dec 2011 15:48:45 +0200 Subject: mmc: sdhci-pci: remove SDHCI_QUIRK2_OWN_CARD_DETECTION Even if a driver provides separate card detection, an interrupt is still needed to abort mmc requests that are in progress. SDHCI_QUIRK2_OWN_CARD_DETECTION prevents that, so remove it. Signed-off-by: Adrian Hunter Signed-off-by: Chris Ball --- include/linux/mmc/sdhci.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h index e4b69353678d..dad7a469f09c 100644 --- a/include/linux/mmc/sdhci.h +++ b/include/linux/mmc/sdhci.h @@ -90,8 +90,6 @@ struct sdhci_host { unsigned int quirks2; /* More deviations from spec. */ -#define SDHCI_QUIRK2_OWN_CARD_DETECTION (1<<0) - int irq; /* Device IRQ */ void __iomem *ioaddr; /* Mapped address */ -- cgit v1.2.3 From aa9df4fb2adcc73d36fa41e23059519be770aaa5 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Mon, 19 Dec 2011 16:24:19 +0100 Subject: mmc: core: Add option to prevent eMMC sleep command Host may now use MMC_CAP2_NO_SLEEP_CMD to disable the use of eMMC sleep/awake command. This option can be used when your platform has a buggy kernel crash dump software, which is supposed to store the dump on the eMMC, but is not able to wake up the eMMC from sleep state. In particular, failures have been seen with u-boot; even if it is fixed there, platforms will be slow to update their bootloader binaries. Signed-off-by: Ulf Hansson Reviewed-by: Hanumath Prasad Reviewed-by: Srinidhi Kasagar Acked-by: Subhash Jadavani Signed-off-by: Chris Ball --- include/linux/mmc/host.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 742f0e102e1e..031d865167a2 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -247,6 +247,7 @@ struct mmc_host { #define MMC_CAP2_CACHE_CTRL (1 << 1) /* Allow cache control */ #define MMC_CAP2_POWEROFF_NOTIFY (1 << 2) /* Notify poweroff supported */ #define MMC_CAP2_NO_MULTI_READ (1 << 3) /* Multiblock reads don't work */ +#define MMC_CAP2_NO_SLEEP_CMD (1 << 4) /* Don't allow sleep command */ mmc_pm_flag_t pm_caps; /* supported pm features */ unsigned int power_notify_type; -- cgit v1.2.3 From fd83240a60ecc59849420df3393e9e6d35c77683 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Thu, 12 Jan 2012 09:17:30 +0100 Subject: blockdev: convert some macros to static inlines We prefer to program in C rather than preprocessor and it fixes this warning when CONFIG_BLK_DEV_INTEGRITY is not set: drivers/md/dm-table.c: In function 'dm_table_set_integrity': drivers/md/dm-table.c:1285:3: warning: statement with no effect [-Wunused-value] Signed-off-by: Stephen Rothwell Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 77 +++++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 64 insertions(+), 13 deletions(-) (limited to 'include/linux') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index adc34133a56a..5cfb9b22627f 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -1298,19 +1298,70 @@ queue_max_integrity_segments(struct request_queue *q) #else /* CONFIG_BLK_DEV_INTEGRITY */ -#define blk_integrity_rq(rq) (0) -#define blk_rq_count_integrity_sg(a, b) (0) -#define blk_rq_map_integrity_sg(a, b, c) (0) -#define bdev_get_integrity(a) (0) -#define blk_get_integrity(a) (0) -#define blk_integrity_compare(a, b) (0) -#define blk_integrity_register(a, b) (0) -#define blk_integrity_unregister(a) do { } while (0) -#define blk_queue_max_integrity_segments(a, b) do { } while (0) -#define queue_max_integrity_segments(a) (0) -#define blk_integrity_merge_rq(a, b, c) (0) -#define blk_integrity_merge_bio(a, b, c) (0) -#define blk_integrity_is_initialized(a) (0) +struct bio; +struct block_device; +struct gendisk; +struct blk_integrity; + +static inline int blk_integrity_rq(struct request *rq) +{ + return 0; +} +static inline int blk_rq_count_integrity_sg(struct request_queue *q, + struct bio *b) +{ + return 0; +} +static inline int blk_rq_map_integrity_sg(struct request_queue *q, + struct bio *b, + struct scatterlist *s) +{ + return 0; +} +static inline struct blk_integrity *bdev_get_integrity(struct block_device *b) +{ + return 0; +} +static inline struct blk_integrity *blk_get_integrity(struct gendisk *disk) +{ + return NULL; +} +static inline int blk_integrity_compare(struct gendisk *a, struct gendisk *b) +{ + return 0; +} +static inline int blk_integrity_register(struct gendisk *d, + struct blk_integrity *b) +{ + return 0; +} +static inline void blk_integrity_unregister(struct gendisk *d) +{ +} +static inline void blk_queue_max_integrity_segments(struct request_queue *q, + unsigned int segs) +{ +} +static inline unsigned short queue_max_integrity_segments(struct request_queue *q) +{ + return 0; +} +static inline int blk_integrity_merge_rq(struct request_queue *rq, + struct request *r1, + struct request *r2) +{ + return 0; +} +static inline int blk_integrity_merge_bio(struct request_queue *rq, + struct request *r, + struct bio *b) +{ + return 0; +} +static inline bool blk_integrity_is_initialized(struct gendisk *g) +{ + return 0; +} #endif /* CONFIG_BLK_DEV_INTEGRITY */ -- cgit v1.2.3 From 46fe44ce8777f087aa8ad4a2605fdcfb9c2d63af Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Wed, 16 Nov 2011 15:03:59 +0100 Subject: quota: Pass information that quota is stored in system file to userspace Quota tools need to know whether quota is stored in a system file or in classical aquota.{user|group} files. So pass this information as a flag in GETINFO quotactl. Signed-off-by: Jan Kara --- include/linux/quota.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/quota.h b/include/linux/quota.h index cb7855699037..c09fa042b5ea 100644 --- a/include/linux/quota.h +++ b/include/linux/quota.h @@ -230,7 +230,11 @@ struct mem_dqinfo { struct super_block; #define DQF_MASK 0xffff /* Mask for format specific flags */ -#define DQF_INFO_DIRTY_B 16 +#define DQF_GETINFO_MASK 0x1ffff /* Mask for flags passed to userspace */ +#define DQF_SETINFO_MASK 0xffff /* Mask for flags modifiable from userspace */ +#define DQF_SYS_FILE_B 16 +#define DQF_SYS_FILE (1 << DQF_SYS_FILE_B) /* Quota file stored as system file */ +#define DQF_INFO_DIRTY_B 31 #define DQF_INFO_DIRTY (1 << DQF_INFO_DIRTY_B) /* Is info dirty? */ extern void mark_info_dirty(struct super_block *sb, int type); -- cgit v1.2.3 From 46f72b349290d2bd7aecea38f02609d814332df6 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Tue, 10 Jan 2012 09:04:37 -0800 Subject: vfs: export symbol d_find_any_alias() Ceph needs this. Reviewed-by: Christoph Hellwig Signed-off-by: Sage Weil --- include/linux/dcache.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/dcache.h b/include/linux/dcache.h index ed9f74f6c519..3871ba743b4c 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -241,6 +241,7 @@ extern struct dentry * d_alloc(struct dentry *, const struct qstr *); extern struct dentry * d_alloc_pseudo(struct super_block *, const struct qstr *); extern struct dentry * d_splice_alias(struct inode *, struct dentry *); extern struct dentry * d_add_ci(struct dentry *, struct inode *, struct qstr *); +extern struct dentry *d_find_any_alias(struct inode *inode); extern struct dentry * d_obtain_alias(struct inode *); extern void shrink_dcache_sb(struct super_block *); extern void shrink_dcache_parent(struct dentry *); -- cgit v1.2.3 From a4924c71aa43d4f8a3f342b1f71788349472e684 Mon Sep 17 00:00:00 2001 From: Girish K S Date: Wed, 11 Jan 2012 14:04:52 -0500 Subject: mmc: core: HS200 mode support for eMMC 4.5 This patch adds the support of the HS200 bus speed for eMMC 4.5 devices. The eMMC 4.5 devices have support for 200MHz bus speed. The function prototype of the tuning function is modified to handle the tuning command number which is different in sd and mmc case. Signed-off-by: Girish K S Signed-off-by: Philip Rakity Signed-off-by: Chris Ball --- include/linux/mmc/card.h | 3 +++ include/linux/mmc/host.h | 11 +++++++- include/linux/mmc/mmc.h | 66 +++++++++++++++++++++++++++++++++++++++++++++++- 3 files changed, 78 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 9478a6bf1bb1..9f22ba572de0 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -216,6 +216,7 @@ struct mmc_card { #define MMC_STATE_ULTRAHIGHSPEED (1<<5) /* card is in ultra high speed mode */ #define MMC_CARD_SDXC (1<<6) /* card is SDXC */ #define MMC_CARD_REMOVED (1<<7) /* card has been removed */ +#define MMC_STATE_HIGHSPEED_200 (1<<8) /* card is in HS200 mode */ unsigned int quirks; /* card quirks */ #define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0 writes outside of the VS CCCR range */ #define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1) /* use func->cur_blksize */ @@ -374,6 +375,7 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data) #define mmc_card_present(c) ((c)->state & MMC_STATE_PRESENT) #define mmc_card_readonly(c) ((c)->state & MMC_STATE_READONLY) #define mmc_card_highspeed(c) ((c)->state & MMC_STATE_HIGHSPEED) +#define mmc_card_hs200(c) ((c)->state & MMC_STATE_HIGHSPEED_200) #define mmc_card_blockaddr(c) ((c)->state & MMC_STATE_BLOCKADDR) #define mmc_card_ddr_mode(c) ((c)->state & MMC_STATE_HIGHSPEED_DDR) #define mmc_card_uhs(c) ((c)->state & MMC_STATE_ULTRAHIGHSPEED) @@ -384,6 +386,7 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data) #define mmc_card_set_present(c) ((c)->state |= MMC_STATE_PRESENT) #define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY) #define mmc_card_set_highspeed(c) ((c)->state |= MMC_STATE_HIGHSPEED) +#define mmc_card_set_hs200(c) ((c)->state |= MMC_STATE_HIGHSPEED_200) #define mmc_card_set_blockaddr(c) ((c)->state |= MMC_STATE_BLOCKADDR) #define mmc_card_set_ddr_mode(c) ((c)->state |= MMC_STATE_HIGHSPEED_DDR) #define mmc_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED) diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 031d865167a2..dd13e0539092 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -56,10 +56,13 @@ struct mmc_ios { #define MMC_TIMING_UHS_SDR50 3 #define MMC_TIMING_UHS_SDR104 4 #define MMC_TIMING_UHS_DDR50 5 +#define MMC_TIMING_MMC_HS200 6 #define MMC_SDR_MODE 0 #define MMC_1_2V_DDR_MODE 1 #define MMC_1_8V_DDR_MODE 2 +#define MMC_1_2V_SDR_MODE 3 +#define MMC_1_8V_SDR_MODE 4 unsigned char signal_voltage; /* signalling voltage (1.8V or 3.3V) */ @@ -148,7 +151,9 @@ struct mmc_host_ops { void (*init_card)(struct mmc_host *host, struct mmc_card *card); int (*start_signal_voltage_switch)(struct mmc_host *host, struct mmc_ios *ios); - int (*execute_tuning)(struct mmc_host *host); + + /* The tuning command opcode value is different for SD and eMMC cards */ + int (*execute_tuning)(struct mmc_host *host, u32 opcode); void (*enable_preset_value)(struct mmc_host *host, bool enable); int (*select_drive_strength)(unsigned int max_dtr, int host_drv, int card_drv); void (*hw_reset)(struct mmc_host *host); @@ -248,6 +253,10 @@ struct mmc_host { #define MMC_CAP2_POWEROFF_NOTIFY (1 << 2) /* Notify poweroff supported */ #define MMC_CAP2_NO_MULTI_READ (1 << 3) /* Multiblock reads don't work */ #define MMC_CAP2_NO_SLEEP_CMD (1 << 4) /* Don't allow sleep command */ +#define MMC_CAP2_HS200_1_8V_SDR (1 << 5) /* can support */ +#define MMC_CAP2_HS200_1_2V_SDR (1 << 6) /* can support */ +#define MMC_CAP2_HS200 (MMC_CAP2_HS200_1_8V_SDR | \ + MMC_CAP2_HS200_1_2V_SDR) mmc_pm_flag_t pm_caps; /* supported pm features */ unsigned int power_notify_type; diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index 665548e639e8..fb9f6e116e1c 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -51,6 +51,7 @@ #define MMC_READ_SINGLE_BLOCK 17 /* adtc [31:0] data addr R1 */ #define MMC_READ_MULTIPLE_BLOCK 18 /* adtc [31:0] data addr R1 */ #define MMC_SEND_TUNING_BLOCK 19 /* adtc R1 */ +#define MMC_SEND_TUNING_BLOCK_HS200 21 /* adtc R1 */ /* class 3 */ #define MMC_WRITE_DAT_UNTIL_STOP 20 /* adtc [31:0] data addr R1 */ @@ -339,13 +340,76 @@ struct _mmc_csd { #define EXT_CSD_CARD_TYPE_26 (1<<0) /* Card can run at 26MHz */ #define EXT_CSD_CARD_TYPE_52 (1<<1) /* Card can run at 52MHz */ -#define EXT_CSD_CARD_TYPE_MASK 0xF /* Mask out reserved bits */ +#define EXT_CSD_CARD_TYPE_MASK 0x3F /* Mask out reserved bits */ #define EXT_CSD_CARD_TYPE_DDR_1_8V (1<<2) /* Card can run at 52MHz */ /* DDR mode @1.8V or 3V I/O */ #define EXT_CSD_CARD_TYPE_DDR_1_2V (1<<3) /* Card can run at 52MHz */ /* DDR mode @1.2V I/O */ #define EXT_CSD_CARD_TYPE_DDR_52 (EXT_CSD_CARD_TYPE_DDR_1_8V \ | EXT_CSD_CARD_TYPE_DDR_1_2V) +#define EXT_CSD_CARD_TYPE_SDR_1_8V (1<<4) /* Card can run at 200MHz */ +#define EXT_CSD_CARD_TYPE_SDR_1_2V (1<<5) /* Card can run at 200MHz */ + /* SDR mode @1.2V I/O */ + +#define EXT_CSD_CARD_TYPE_SDR_200 (EXT_CSD_CARD_TYPE_SDR_1_8V | \ + EXT_CSD_CARD_TYPE_SDR_1_2V) + +#define EXT_CSD_CARD_TYPE_SDR_ALL (EXT_CSD_CARD_TYPE_SDR_200 | \ + EXT_CSD_CARD_TYPE_52 | \ + EXT_CSD_CARD_TYPE_26) + +#define EXT_CSD_CARD_TYPE_SDR_1_2V_ALL (EXT_CSD_CARD_TYPE_SDR_1_2V | \ + EXT_CSD_CARD_TYPE_52 | \ + EXT_CSD_CARD_TYPE_26) + +#define EXT_CSD_CARD_TYPE_SDR_1_8V_ALL (EXT_CSD_CARD_TYPE_SDR_1_8V | \ + EXT_CSD_CARD_TYPE_52 | \ + EXT_CSD_CARD_TYPE_26) + +#define EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_8V (EXT_CSD_CARD_TYPE_SDR_1_2V | \ + EXT_CSD_CARD_TYPE_DDR_1_8V | \ + EXT_CSD_CARD_TYPE_52 | \ + EXT_CSD_CARD_TYPE_26) + +#define EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_8V (EXT_CSD_CARD_TYPE_SDR_1_8V | \ + EXT_CSD_CARD_TYPE_DDR_1_8V | \ + EXT_CSD_CARD_TYPE_52 | \ + EXT_CSD_CARD_TYPE_26) + +#define EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_2V (EXT_CSD_CARD_TYPE_SDR_1_2V | \ + EXT_CSD_CARD_TYPE_DDR_1_2V | \ + EXT_CSD_CARD_TYPE_52 | \ + EXT_CSD_CARD_TYPE_26) + +#define EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_2V (EXT_CSD_CARD_TYPE_SDR_1_8V | \ + EXT_CSD_CARD_TYPE_DDR_1_2V | \ + EXT_CSD_CARD_TYPE_52 | \ + EXT_CSD_CARD_TYPE_26) + +#define EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_52 (EXT_CSD_CARD_TYPE_SDR_1_2V | \ + EXT_CSD_CARD_TYPE_DDR_52 | \ + EXT_CSD_CARD_TYPE_52 | \ + EXT_CSD_CARD_TYPE_26) + +#define EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_52 (EXT_CSD_CARD_TYPE_SDR_1_8V | \ + EXT_CSD_CARD_TYPE_DDR_52 | \ + EXT_CSD_CARD_TYPE_52 | \ + EXT_CSD_CARD_TYPE_26) + +#define EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_8V (EXT_CSD_CARD_TYPE_SDR_200 | \ + EXT_CSD_CARD_TYPE_DDR_1_8V | \ + EXT_CSD_CARD_TYPE_52 | \ + EXT_CSD_CARD_TYPE_26) + +#define EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_2V (EXT_CSD_CARD_TYPE_SDR_200 | \ + EXT_CSD_CARD_TYPE_DDR_1_2V | \ + EXT_CSD_CARD_TYPE_52 | \ + EXT_CSD_CARD_TYPE_26) + +#define EXT_CSD_CARD_TYPE_SDR_ALL_DDR_52 (EXT_CSD_CARD_TYPE_SDR_200 | \ + EXT_CSD_CARD_TYPE_DDR_52 | \ + EXT_CSD_CARD_TYPE_52 | \ + EXT_CSD_CARD_TYPE_26) #define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */ #define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */ -- cgit v1.2.3 From 069c9f142822d552ec885572945d8bce9eff0519 Mon Sep 17 00:00:00 2001 From: Girish K S Date: Fri, 6 Jan 2012 09:56:39 +0530 Subject: mmc: host: Adds support for eMMC 4.5 HS200 mode This patch adds support for the HS200 mode on the host side. Also enables the tuning feature required when the HS200 mode is selected. Signed-off-by: Girish K S Signed-off-by: Chris Ball --- include/linux/mmc/sdhci.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h index dad7a469f09c..c750f85177d9 100644 --- a/include/linux/mmc/sdhci.h +++ b/include/linux/mmc/sdhci.h @@ -119,6 +119,7 @@ struct sdhci_host { #define SDHCI_AUTO_CMD23 (1<<7) /* Auto CMD23 support */ #define SDHCI_PV_ENABLED (1<<8) /* Preset value enabled */ #define SDHCI_SDIO_IRQ_ENABLED (1<<9) /* SDIO irq enabled */ +#define SDHCI_HS200_NEEDS_TUNING (1<<10) /* HS200 needs tuning */ unsigned int version; /* SDHCI spec. version */ -- cgit v1.2.3 From bd77c04772da38fca510c81f78e51f727123b919 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 13 Jan 2012 09:32:14 +1030 Subject: module: struct module_ref should contains long fields module_ref contains two "unsigned int" fields. Thats now too small, since some machines can open more than 2^32 files. Check commit 518de9b39e8 (fs: allow for more than 2^31 files) for reference. We can add an aligned(2 * sizeof(unsigned long)) attribute to force alloc_percpu() allocating module_ref areas in single cache lines. Signed-off-by: Eric Dumazet CC: Rusty Russell CC: Tejun Heo CC: Robin Holt CC: David Miller Signed-off-by: Rusty Russell --- include/linux/module.h | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/module.h b/include/linux/module.h index 3cb7839a60b9..4598bf03e98b 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -205,6 +205,20 @@ enum module_state MODULE_STATE_GOING, }; +/** + * struct module_ref - per cpu module reference counts + * @incs: number of module get on this cpu + * @decs: number of module put on this cpu + * + * We force an alignment on 8 or 16 bytes, so that alloc_percpu() + * put @incs/@decs in same cache line, with no extra memory cost, + * since alloc_percpu() is fine grained. + */ +struct module_ref { + unsigned long incs; + unsigned long decs; +} __attribute((aligned(2 * sizeof(unsigned long)))); + struct module { enum module_state state; @@ -347,10 +361,7 @@ struct module /* Destruction function. */ void (*exit)(void); - struct module_ref { - unsigned int incs; - unsigned int decs; - } __percpu *refptr; + struct module_ref __percpu *refptr; #endif #ifdef CONFIG_CONSTRUCTORS @@ -434,7 +445,7 @@ extern void __module_put_and_exit(struct module *mod, long code) #define module_put_and_exit(code) __module_put_and_exit(THIS_MODULE, code); #ifdef CONFIG_MODULE_UNLOAD -unsigned int module_refcount(struct module *mod); +unsigned long module_refcount(struct module *mod); void __symbol_put(const char *symbol); #define symbol_put(x) __symbol_put(MODULE_SYMBOL_PREFIX #x) void symbol_put_addr(void *addr); -- cgit v1.2.3 From bafeafeab94b8d3019aac15c2df2ce47b08a6363 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 13 Jan 2012 09:32:16 +1030 Subject: module_param: check type correctness for module_param_array module_param_array(), unlike its non-array cousins, didn't check the type of the variable. Fixing this found two bugs. Cc: Luca Risolia Cc: Mauro Carvalho Chehab Cc: Eric Piel Cc: linux-media@vger.kernel.org Signed-off-by: Rusty Russell --- include/linux/moduleparam.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h index 7939f636c8ba..794d4b0f1215 100644 --- a/include/linux/moduleparam.h +++ b/include/linux/moduleparam.h @@ -395,6 +395,7 @@ extern int param_get_invbool(char *buffer, const struct kernel_param *kp); * module_param_named() for why this might be necessary. */ #define module_param_array_named(name, array, type, nump, perm) \ + param_check_##type(name, &(array)[0]); \ static const struct kparam_array __param_arr_##name \ = { .max = ARRAY_SIZE(array), .num = nump, \ .ops = ¶m_ops_##type, \ -- cgit v1.2.3 From 69116f279a9eaf4c540934269342d9149538fc79 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 13 Jan 2012 09:32:17 +1030 Subject: module_param: avoid bool abuse, add bint for special cases. For historical reasons, we allow module_param(bool) to take an int (or an unsigned int). That's going away. A few drivers really want an int: they set it to -1 and a parameter will set it to 0 or 1. This sucks: reading them from sysfs will give 'Y' for both -1 and 1, but if we change it to an int, then the users might be broken (if they did "param" instead of "param=1"). Use a new 'bint' parser for them. (ntfs has a different problem: it needs an int for debug_msgs because it's also exposed via sysctl.) Cc: Steve Glendinning Cc: Jean Delvare Cc: Guenter Roeck Cc: Hoang-Nam Nguyen Cc: Christoph Raisch Cc: Roland Dreier Cc: Sean Hefty Cc: Hal Rosenstock Cc: linux390@de.ibm.com Cc: Anton Altaparmakov Cc: Jaroslav Kysela Cc: Takashi Iwai Cc: lm-sensors@lm-sensors.org Cc: linux-rdma@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: linux-ntfs-dev@lists.sourceforge.net Cc: alsa-devel@alsa-project.org Acked-by: Takashi Iwai (For the sound part) Acked-by: Guenter Roeck (For the hwmon driver) Signed-off-by: Rusty Russell --- include/linux/moduleparam.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h index 794d4b0f1215..6bdde0c3bcca 100644 --- a/include/linux/moduleparam.h +++ b/include/linux/moduleparam.h @@ -367,6 +367,12 @@ extern int param_set_invbool(const char *val, const struct kernel_param *kp); extern int param_get_invbool(char *buffer, const struct kernel_param *kp); #define param_check_invbool(name, p) __param_check(name, p, bool) +/* An int, which can only be set like a bool (though it shows as an int). */ +extern struct kernel_param_ops param_ops_bint; +extern int param_set_bint(const char *val, const struct kernel_param *kp); +#define param_get_bint param_get_int +#define param_check_bint param_check_int + /** * module_param_array - a parameter which is an array of some type * @name: the name of the array variable -- cgit v1.2.3 From 2329abfa344a9a824bc4c71f2415528777265510 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 13 Jan 2012 09:32:18 +1030 Subject: module_param: make bool parameters really bool (core code) module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Signed-off-by: Rusty Russell --- include/linux/init.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/init.h b/include/linux/init.h index 9146f39cdddf..6b951095a42f 100644 --- a/include/linux/init.h +++ b/include/linux/init.h @@ -2,6 +2,7 @@ #define _LINUX_INIT_H #include +#include /* These macros are used to mark some functions or * initialized data (doesn't apply to uninitialized data) @@ -156,7 +157,7 @@ void prepare_namespace(void); extern void (*late_time_init)(void); -extern int initcall_debug; +extern bool initcall_debug; #endif -- cgit v1.2.3 From 90ab5ee94171b3e28de6bb42ee30b527014e0be7 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 13 Jan 2012 09:32:20 +1030 Subject: module_param: make bool parameters really bool (drivers & misc) module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab Signed-off-by: Rusty Russell --- include/linux/console.h | 2 +- include/linux/lockd/lockd.h | 2 +- include/linux/mmc/host.h | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/console.h b/include/linux/console.h index 7453cfd593c8..7201ce4280ca 100644 --- a/include/linux/console.h +++ b/include/linux/console.h @@ -152,7 +152,7 @@ extern int braille_register_console(struct console *, int index, char *console_options, char *braille_options); extern int braille_unregister_console(struct console *); extern void console_sysfs_notify(void); -extern int console_suspend_enabled; +extern bool console_suspend_enabled; /* Suspend and resume console messages over PM events */ extern void suspend_console(void); diff --git a/include/linux/lockd/lockd.h b/include/linux/lockd/lockd.h index 90b0656a869e..88a114fce477 100644 --- a/include/linux/lockd/lockd.h +++ b/include/linux/lockd/lockd.h @@ -195,7 +195,7 @@ extern struct svc_procedure nlmsvc_procedures4[]; #endif extern int nlmsvc_grace_period; extern unsigned long nlmsvc_timeout; -extern int nsm_use_hostnames; +extern bool nsm_use_hostnames; extern u32 nsm_local_state; /* diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index a3ac9c48e5de..8ef7894a48d0 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -396,7 +396,7 @@ static inline void mmc_set_disable_delay(struct mmc_host *host, } /* Module parameter */ -extern int mmc_assume_removable; +extern bool mmc_assume_removable; static inline int mmc_card_is_removable(struct mmc_host *host) { -- cgit v1.2.3 From 72db395ffadb1d33233fd123c2bf87ba0198c6c1 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 13 Jan 2012 09:32:28 +1030 Subject: module_param: check that bool parameters really are bool. module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. This tightens the check (you'll get a warning about incompatible return type) but still allows it. Next kernel version, we'll remove it. Signed-off-by: Rusty Russell --- include/linux/moduleparam.h | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h index 6bdde0c3bcca..c47f4d60db0b 100644 --- a/include/linux/moduleparam.h +++ b/include/linux/moduleparam.h @@ -350,17 +350,11 @@ extern int param_set_charp(const char *val, const struct kernel_param *kp); extern int param_get_charp(char *buffer, const struct kernel_param *kp); #define param_check_charp(name, p) __param_check(name, p, char *) -/* For historical reasons "bool" parameters can be (unsigned) "int". */ +/* We used to allow int as well as bool. We're taking that away! */ extern struct kernel_param_ops param_ops_bool; extern int param_set_bool(const char *val, const struct kernel_param *kp); extern int param_get_bool(char *buffer, const struct kernel_param *kp); -#define param_check_bool(name, p) \ - static inline void __check_##name(void) \ - { \ - BUILD_BUG_ON(!__same_type((p), bool *) && \ - !__same_type((p), unsigned int *) && \ - !__same_type((p), int *)); \ - } +#define param_check_bool(name, p) __param_check(name, p, bool) extern struct kernel_param_ops param_ops_invbool; extern int param_set_invbool(const char *val, const struct kernel_param *kp); -- cgit v1.2.3 From 6898e3bd11cc9a931ef115eee9000ac9d8f8c3cf Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Fri, 13 Jan 2012 08:15:33 +0100 Subject: block: Stop using macro stubs for the bio data integrity calls Replace preprocessor macro stubs with real function declarations to prevent warnings when CONFIG_BLK_DEV_INTEGRITY is disabled. Signed-off-by: Martin K. Petersen Signed-off-by: Jens Axboe --- include/linux/bio.h | 66 ++++++++++++++++++++++++++++++++++++++++++----------- 1 file changed, 53 insertions(+), 13 deletions(-) (limited to 'include/linux') diff --git a/include/linux/bio.h b/include/linux/bio.h index 847994aef0e9..129a9c097958 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -515,24 +515,64 @@ extern void bio_integrity_init(void); #else /* CONFIG_BLK_DEV_INTEGRITY */ -#define bio_integrity(a) (0) -#define bioset_integrity_create(a, b) (0) -#define bio_integrity_prep(a) (0) -#define bio_integrity_enabled(a) (0) +static inline int bio_integrity(struct bio *bio) +{ + return 0; +} + +static inline int bio_integrity_enabled(struct bio *bio) +{ + return 0; +} + +static inline int bioset_integrity_create(struct bio_set *bs, int pool_size) +{ + return 0; +} + +static inline void bioset_integrity_free (struct bio_set *bs) +{ + return; +} + +static inline int bio_integrity_prep(struct bio *bio) +{ + return 0; +} + +static inline void bio_integrity_free(struct bio *bio, struct bio_set *bs) +{ + return; +} + static inline int bio_integrity_clone(struct bio *bio, struct bio *bio_src, gfp_t gfp_mask, struct bio_set *bs) { return 0; } -#define bioset_integrity_free(a) do { } while (0) -#define bio_integrity_free(a, b) do { } while (0) -#define bio_integrity_endio(a, b) do { } while (0) -#define bio_integrity_advance(a, b) do { } while (0) -#define bio_integrity_trim(a, b, c) do { } while (0) -#define bio_integrity_split(a, b, c) do { } while (0) -#define bio_integrity_set_tag(a, b, c) do { } while (0) -#define bio_integrity_get_tag(a, b, c) do { } while (0) -#define bio_integrity_init(a) do { } while (0) + +static inline void bio_integrity_split(struct bio *bio, struct bio_pair *bp, + int sectors) +{ + return; +} + +static inline void bio_integrity_advance(struct bio *bio, + unsigned int bytes_done) +{ + return; +} + +static inline void bio_integrity_trim(struct bio *bio, unsigned int offset, + unsigned int sectors) +{ + return; +} + +static inline void bio_integrity_init(void) +{ + return; +} #endif /* CONFIG_BLK_DEV_INTEGRITY */ -- cgit v1.2.3 From 577ebb374c78314ac4617242f509e2f5e7156649 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Thu, 12 Jan 2012 16:01:27 +0100 Subject: block: add and use scsi_blk_cmd_ioctl Introduce a wrapper around scsi_cmd_ioctl that takes a block device. The function will then be enhanced to detect partition block devices and, in that case, subject the ioctls to whitelisting. Cc: linux-scsi@vger.kernel.org Cc: Jens Axboe Cc: James Bottomley Signed-off-by: Paolo Bonzini Signed-off-by: Linus Torvalds --- include/linux/blkdev.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 94acd8172b5b..ca7b869508c7 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -675,6 +675,8 @@ extern int blk_insert_cloned_request(struct request_queue *q, struct request *rq); extern void blk_delay_queue(struct request_queue *, unsigned long); extern void blk_recount_segments(struct request_queue *, struct bio *); +extern int scsi_cmd_blk_ioctl(struct block_device *, fmode_t, + unsigned int, void __user *); extern int scsi_cmd_ioctl(struct request_queue *, struct gendisk *, fmode_t, unsigned int, void __user *); extern int sg_scsi_ioctl(struct request_queue *, struct gendisk *, fmode_t, -- cgit v1.2.3 From 0bfc96cb77224736dfa35c3c555d37b3646ef35e Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Thu, 12 Jan 2012 16:01:28 +0100 Subject: block: fail SCSI passthrough ioctls on partition devices Linux allows executing the SG_IO ioctl on a partition or LVM volume, and will pass the command to the underlying block device. This is well-known, but it is also a large security problem when (via Unix permissions, ACLs, SELinux or a combination thereof) a program or user needs to be granted access only to part of the disk. This patch lets partitions forward a small set of harmless ioctls; others are logged with printk so that we can see which ioctls are actually sent. In my tests only CDROM_GET_CAPABILITY actually occurred. Of course it was being sent to a (partition on a) hard disk, so it would have failed with ENOTTY and the patch isn't changing anything in practice. Still, I'm treating it specially to avoid spamming the logs. In principle, this restriction should include programs running with CAP_SYS_RAWIO. If for example I let a program access /dev/sda2 and /dev/sdb, it still should not be able to read/write outside the boundaries of /dev/sda2 independent of the capabilities. However, for now programs with CAP_SYS_RAWIO will still be allowed to send the ioctls. Their actions will still be logged. This patch does not affect the non-libata IDE driver. That driver however already tests for bd != bd->bd_contains before issuing some ioctl; it could be restricted further to forbid these ioctls even for programs running with CAP_SYS_ADMIN/CAP_SYS_RAWIO. Cc: linux-scsi@vger.kernel.org Cc: Jens Axboe Cc: James Bottomley Signed-off-by: Paolo Bonzini [ Make it also print the command name when warning - Linus ] Signed-off-by: Linus Torvalds --- include/linux/blkdev.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index ca7b869508c7..0ed1eb062313 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -675,6 +675,7 @@ extern int blk_insert_cloned_request(struct request_queue *q, struct request *rq); extern void blk_delay_queue(struct request_queue *, unsigned long); extern void blk_recount_segments(struct request_queue *, struct bio *); +extern int scsi_verify_blk_ioctl(struct block_device *, unsigned int); extern int scsi_cmd_blk_ioctl(struct block_device *, fmode_t, unsigned int, void __user *); extern int scsi_cmd_ioctl(struct request_queue *, struct gendisk *, fmode_t, -- cgit v1.2.3 From b54ac6d2a25084667da781c7ca2cebef52a2bcdd Mon Sep 17 00:00:00 2001 From: Huang Ying Date: Thu, 8 Dec 2011 11:25:49 +0800 Subject: ACPI, Record ACPI NVS regions Some firmware will access memory in ACPI NVS region via APEI. That is, instructions in APEI ERST/EINJ table will read/write ACPI NVS region. The original resource conflict checking in APEI code will check memory/ioport accessed by APEI via general resource management mechanism. But ACPI NVS region is marked as busy already, so that the false resource conflict will prevent APEI ERST/EINJ to work. To fix this, this patch record ACPI NVS regions, so that we can avoid request resources for memory region inside it. Signed-off-by: Huang Ying Signed-off-by: Len Brown --- include/linux/acpi.h | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 6001b4da39dd..26b75442ff7a 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -306,6 +306,11 @@ extern acpi_status acpi_pci_osc_control_set(acpi_handle handle, u32 *mask, u32 req); extern void acpi_early_init(void); +extern int acpi_nvs_register(__u64 start, __u64 size); + +extern int acpi_nvs_for_each_region(int (*func)(__u64, __u64, void *), + void *data); + #else /* !CONFIG_ACPI */ #define acpi_disabled 1 @@ -348,15 +353,18 @@ static inline int acpi_table_parse(char *id, { return -1; } -#endif /* !CONFIG_ACPI */ -#ifdef CONFIG_ACPI_SLEEP -int suspend_nvs_register(unsigned long start, unsigned long size); -#else -static inline int suspend_nvs_register(unsigned long a, unsigned long b) +static inline int acpi_nvs_register(__u64 start, __u64 size) { return 0; } -#endif + +static inline int acpi_nvs_for_each_region(int (*func)(__u64, __u64, void *), + void *data) +{ + return 0; +} + +#endif /* !CONFIG_ACPI */ #endif /*_LINUX_ACPI_H*/ -- cgit v1.2.3 From 6f68c91c55ea3576d366797fa8d45e31c4aa79f8 Mon Sep 17 00:00:00 2001 From: Myron Stowe Date: Mon, 7 Nov 2011 16:23:34 -0700 Subject: ACPI: Export interfaces for ioremapping/iounmapping ACPI registers Export remapping and unmapping interfaces - acpi_os_map_generic_address() and acpi_os_unmap_generic_address() - for ACPI generic registers that are backed by memory mapped I/O (MMIO). The acpi_os_map_generic_address() and acpi_os_unmap_generic_address() declarations may more properly belong in include/acpi/acpiosxf.h next to acpi_os_read_memory() but I believe that would require the ACPI CA making them an official part of the ACPI CA - OS interface. ACPI Generic Address Structure (GAS) reference (ACPI's fixed/generic hardware registers use the GAS format): ACPI Specification, Revision 4.0, Section 5.2.3.1, "Generic Address Structure" Signed-off-by: Myron Stowe Acked-by: Rafael J. Wysocki Signed-off-by: Len Brown --- include/linux/acpi_io.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/acpi_io.h b/include/linux/acpi_io.h index 4afd7102459d..b0ffa219993e 100644 --- a/include/linux/acpi_io.h +++ b/include/linux/acpi_io.h @@ -12,4 +12,7 @@ static inline void __iomem *acpi_os_ioremap(acpi_physical_address phys, void __iomem *acpi_os_get_iomem(acpi_physical_address phys, unsigned int size); +int acpi_os_map_generic_address(struct acpi_generic_address *addr); +void acpi_os_unmap_generic_address(struct acpi_generic_address *addr); + #endif -- cgit v1.2.3 From 20c300b10c358daa507be335aec6aa3987ef425a Mon Sep 17 00:00:00 2001 From: Konstantin Khlebnikov Date: Tue, 17 Jan 2012 12:54:01 +0400 Subject: tty: remove unused tty_driver->termios_locked This field is unused since 2.6.28 (commit fe6e29fdb1a7: "tty: simplify ktermios allocation", to be exact) Signed-off-by: Konstantin Khlebnikov Signed-off-by: Linus Torvalds --- include/linux/tty_driver.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h index ecdaeb98b293..5cf685086dd3 100644 --- a/include/linux/tty_driver.h +++ b/include/linux/tty_driver.h @@ -312,7 +312,6 @@ struct tty_driver { */ struct tty_struct **ttys; struct ktermios **termios; - struct ktermios **termios_locked; void *driver_state; /* -- cgit v1.2.3 From 85e7bac33b8d5edafc4e219c7dfdb3d48e0b4e31 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Tue, 3 Jan 2012 14:23:05 -0500 Subject: seccomp: audit abnormal end to a process due to seccomp The audit system likes to collect information about processes that end abnormally (SIGSEGV) as this may me useful intrusion detection information. This patch adds audit support to collect information when seccomp forces a task to exit because of misbehavior in a similar way. Signed-off-by: Eric Paris --- include/linux/audit.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/audit.h b/include/linux/audit.h index 426ab9f4dd85..6e1c533f9b46 100644 --- a/include/linux/audit.h +++ b/include/linux/audit.h @@ -430,6 +430,7 @@ extern void audit_putname(const char *name); extern void __audit_inode(const char *name, const struct dentry *dentry); extern void __audit_inode_child(const struct dentry *dentry, const struct inode *parent); +extern void __audit_seccomp(unsigned long syscall); extern void __audit_ptrace(struct task_struct *t); static inline int audit_dummy_context(void) @@ -453,6 +454,12 @@ static inline void audit_inode_child(const struct dentry *dentry, } void audit_core_dumps(long signr); +static inline void audit_seccomp(unsigned long syscall) +{ + if (unlikely(!audit_dummy_context())) + __audit_seccomp(syscall); +} + static inline void audit_ptrace(struct task_struct *t) { if (unlikely(!audit_dummy_context())) @@ -558,6 +565,7 @@ extern int audit_signals; #define audit_inode(n,d) do { (void)(d); } while (0) #define audit_inode_child(i,p) do { ; } while (0) #define audit_core_dumps(i) do { ; } while (0) +#define audit_seccomp(i) do { ; } while (0) #define auditsc_get_stamp(c,t,s) (0) #define audit_get_loginuid(t) (-1) #define audit_get_sessionid(t) (-1) -- cgit v1.2.3 From d7e7528bcd456f5c36ad4a202ccfb43c5aa98bc4 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Tue, 3 Jan 2012 14:23:06 -0500 Subject: Audit: push audit success and retcode into arch ptrace.h The audit system previously expected arches calling to audit_syscall_exit to supply as arguments if the syscall was a success and what the return code was. Audit also provides a helper AUDITSC_RESULT which was supposed to simplify things by converting from negative retcodes to an audit internal magic value stating success or failure. This helper was wrong and could indicate that a valid pointer returned to userspace was a failed syscall. The fix is to fix the layering foolishness. We now pass audit_syscall_exit a struct pt_reg and it in turns calls back into arch code to collect the return value and to determine if the syscall was a success or failure. We also define a generic is_syscall_success() macro which determines success/failure based on if the value is < -MAX_ERRNO. This works for arches like x86 which do not use a separate mechanism to indicate syscall failure. We make both the is_syscall_success() and regs_return_value() static inlines instead of macros. The reason is because the audit function must take a void* for the regs. (uml calls theirs struct uml_pt_regs instead of just struct pt_regs so audit_syscall_exit can't take a struct pt_regs). Since the audit function takes a void* we need to use static inlines to cast it back to the arch correct structure to dereference it. The other major change is that on some arches, like ia64, MIPS and ppc, we change regs_return_value() to give us the negative value on syscall failure. THE only other user of this macro, kretprobe_example.c, won't notice and it makes the value signed consistently for the audit functions across all archs. In arch/sh/kernel/ptrace_64.c I see that we were using regs[9] in the old audit code as the return value. But the ptrace_64.h code defined the macro regs_return_value() as regs[3]. I have no idea which one is correct, but this patch now uses the regs_return_value() function, so it now uses regs[3]. For powerpc we previously used regs->result but now use the regs_return_value() function which uses regs->gprs[3]. regs->gprs[3] is always positive so the regs_return_value(), much like ia64 makes it negative before calling the audit code when appropriate. Signed-off-by: Eric Paris Acked-by: H. Peter Anvin [for x86 portion] Acked-by: Tony Luck [for ia64] Acked-by: Richard Weinberger [for uml] Acked-by: David S. Miller [for sparc] Acked-by: Ralf Baechle [for mips] Acked-by: Benjamin Herrenschmidt [for ppc] --- include/linux/audit.h | 22 ++++++++++++++-------- include/linux/ptrace.h | 10 ++++++++++ 2 files changed, 24 insertions(+), 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/audit.h b/include/linux/audit.h index 6e1c533f9b46..3d65e4b3ba06 100644 --- a/include/linux/audit.h +++ b/include/linux/audit.h @@ -26,6 +26,7 @@ #include #include +#include /* The netlink messages for the audit system is divided into blocks: * 1000 - 1099 are for commanding the audit system @@ -408,10 +409,6 @@ struct audit_field { void *lsm_rule; }; -#define AUDITSC_INVALID 0 -#define AUDITSC_SUCCESS 1 -#define AUDITSC_FAILURE 2 -#define AUDITSC_RESULT(x) ( ((long)(x))<0?AUDITSC_FAILURE:AUDITSC_SUCCESS ) extern int __init audit_register_class(int class, unsigned *list); extern int audit_classify_syscall(int abi, unsigned syscall); extern int audit_classify_arch(int arch); @@ -424,7 +421,7 @@ extern void audit_free(struct task_struct *task); extern void audit_syscall_entry(int arch, int major, unsigned long a0, unsigned long a1, unsigned long a2, unsigned long a3); -extern void audit_syscall_exit(int failed, long return_code); +extern void __audit_syscall_exit(int ret_success, long ret_value); extern void __audit_getname(const char *name); extern void audit_putname(const char *name); extern void __audit_inode(const char *name, const struct dentry *dentry); @@ -438,6 +435,15 @@ static inline int audit_dummy_context(void) void *p = current->audit_context; return !p || *(int *)p; } +static inline void audit_syscall_exit(void *pt_regs) +{ + if (unlikely(current->audit_context)) { + int success = is_syscall_success(pt_regs); + int return_code = regs_return_value(pt_regs); + + __audit_syscall_exit(success, return_code); + } +} static inline void audit_getname(const char *name) { if (unlikely(!audit_dummy_context())) @@ -551,12 +557,12 @@ static inline void audit_mmap_fd(int fd, int flags) extern int audit_n_rules; extern int audit_signals; -#else +#else /* CONFIG_AUDITSYSCALL */ #define audit_finish_fork(t) #define audit_alloc(t) ({ 0; }) #define audit_free(t) do { ; } while (0) #define audit_syscall_entry(ta,a,b,c,d,e) do { ; } while (0) -#define audit_syscall_exit(f,r) do { ; } while (0) +#define audit_syscall_exit(r) do { ; } while (0) #define audit_dummy_context() 1 #define audit_getname(n) do { ; } while (0) #define audit_putname(n) do { ; } while (0) @@ -587,7 +593,7 @@ extern int audit_signals; #define audit_ptrace(t) ((void)0) #define audit_n_rules 0 #define audit_signals 0 -#endif +#endif /* CONFIG_AUDITSYSCALL */ #ifdef CONFIG_AUDIT /* These are defined in audit.c */ diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h index 800f113bea66..dd4cefa6519d 100644 --- a/include/linux/ptrace.h +++ b/include/linux/ptrace.h @@ -112,6 +112,7 @@ #include /* For unlikely. */ #include /* For struct task_struct. */ +#include /* for IS_ERR_VALUE */ extern long arch_ptrace(struct task_struct *child, long request, @@ -265,6 +266,15 @@ static inline void ptrace_release_task(struct task_struct *task) #define force_successful_syscall_return() do { } while (0) #endif +#ifndef is_syscall_success +/* + * On most systems we can tell if a syscall is a success based on if the retval + * is an error value. On some systems like ia64 and powerpc they have different + * indicators of success/failure and must define their own. + */ +#define is_syscall_success(regs) (!IS_ERR_VALUE((unsigned long)(regs_return_value(regs)))) +#endif + /* * should define the following things inside #ifdef __KERNEL__. * -- cgit v1.2.3 From b05d8447e7821695bc2fa3359431f7a664232743 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Tue, 3 Jan 2012 14:23:06 -0500 Subject: audit: inline audit_syscall_entry to reduce burden on archs Every arch calls: if (unlikely(current->audit_context)) audit_syscall_entry() which requires knowledge about audit (the existance of audit_context) in the arch code. Just do it all in static inline in audit.h so that arch's can remain blissfully ignorant. Signed-off-by: Eric Paris --- include/linux/audit.h | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/audit.h b/include/linux/audit.h index 3d65e4b3ba06..f56ce2669b83 100644 --- a/include/linux/audit.h +++ b/include/linux/audit.h @@ -418,9 +418,9 @@ extern int audit_classify_arch(int arch); extern void audit_finish_fork(struct task_struct *child); extern int audit_alloc(struct task_struct *task); extern void audit_free(struct task_struct *task); -extern void audit_syscall_entry(int arch, - int major, unsigned long a0, unsigned long a1, - unsigned long a2, unsigned long a3); +extern void __audit_syscall_entry(int arch, + int major, unsigned long a0, unsigned long a1, + unsigned long a2, unsigned long a3); extern void __audit_syscall_exit(int ret_success, long ret_value); extern void __audit_getname(const char *name); extern void audit_putname(const char *name); @@ -435,6 +435,13 @@ static inline int audit_dummy_context(void) void *p = current->audit_context; return !p || *(int *)p; } +static inline void audit_syscall_entry(int arch, int major, unsigned long a0, + unsigned long a1, unsigned long a2, + unsigned long a3) +{ + if (unlikely(!audit_dummy_context())) + __audit_syscall_entry(arch, major, a0, a1, a2, a3); +} static inline void audit_syscall_exit(void *pt_regs) { if (unlikely(current->audit_context)) { -- cgit v1.2.3 From 07c49417877f8658a6aa0ad9b4e21e4fd4df11b6 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Tue, 3 Jan 2012 14:23:07 -0500 Subject: audit: inline checks for not needing to collect aux records A number of audit hooks make function calls before they determine that auxilary records do not need to be collected. Do those checks as static inlines since the most common case is going to be that records are not needed and we can skip the function call overhead. Signed-off-by: Eric Paris --- include/linux/audit.h | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/audit.h b/include/linux/audit.h index f56ce2669b83..cf16faff6b8a 100644 --- a/include/linux/audit.h +++ b/include/linux/audit.h @@ -489,9 +489,9 @@ extern int audit_set_loginuid(struct task_struct *task, uid_t loginuid); extern void audit_log_task_context(struct audit_buffer *ab); extern void __audit_ipc_obj(struct kern_ipc_perm *ipcp); extern void __audit_ipc_set_perm(unsigned long qbytes, uid_t uid, gid_t gid, umode_t mode); -extern int audit_bprm(struct linux_binprm *bprm); -extern void audit_socketcall(int nargs, unsigned long *args); -extern int audit_sockaddr(int len, void *addr); +extern int __audit_bprm(struct linux_binprm *bprm); +extern void __audit_socketcall(int nargs, unsigned long *args); +extern int __audit_sockaddr(int len, void *addr); extern void __audit_fd_pair(int fd1, int fd2); extern int audit_set_macxattr(const char *name); extern void __audit_mq_open(int oflag, umode_t mode, struct mq_attr *attr); @@ -519,6 +519,23 @@ static inline void audit_ipc_set_perm(unsigned long qbytes, uid_t uid, gid_t gid if (unlikely(!audit_dummy_context())) __audit_ipc_set_perm(qbytes, uid, gid, mode); } +static inline int audit_bprm(struct linux_binprm *bprm) +{ + if (unlikely(!audit_dummy_context())) + return __audit_bprm(bprm); + return 0; +} +static inline void audit_socketcall(int nargs, unsigned long *args) +{ + if (unlikely(!audit_dummy_context())) + __audit_socketcall(nargs, args); +} +static inline int audit_sockaddr(int len, void *addr) +{ + if (unlikely(!audit_dummy_context())) + return __audit_sockaddr(len, addr); + return 0; +} static inline void audit_mq_open(int oflag, umode_t mode, struct mq_attr *attr) { if (unlikely(!audit_dummy_context())) -- cgit v1.2.3 From 38cdce53daa0408a61fe6d86fe48f31515c9b840 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Tue, 3 Jan 2012 14:23:07 -0500 Subject: audit: drop audit_set_macxattr as it doesn't do anything unused. deleted. Signed-off-by: Eric Paris --- include/linux/audit.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/audit.h b/include/linux/audit.h index cf16faff6b8a..4f1efe3e8616 100644 --- a/include/linux/audit.h +++ b/include/linux/audit.h @@ -493,7 +493,6 @@ extern int __audit_bprm(struct linux_binprm *bprm); extern void __audit_socketcall(int nargs, unsigned long *args); extern int __audit_sockaddr(int len, void *addr); extern void __audit_fd_pair(int fd1, int fd2); -extern int audit_set_macxattr(const char *name); extern void __audit_mq_open(int oflag, umode_t mode, struct mq_attr *attr); extern void __audit_mq_sendrecv(mqd_t mqdes, size_t msg_len, unsigned int msg_prio, const struct timespec *abs_timeout); extern void __audit_mq_notify(mqd_t mqdes, const struct sigevent *notification); @@ -606,7 +605,6 @@ extern int audit_signals; #define audit_socketcall(n,a) ((void)0) #define audit_fd_pair(n,a) ((void)0) #define audit_sockaddr(len, addr) ({ 0; }) -#define audit_set_macxattr(n) do { ; } while (0) #define audit_mq_open(o,m,a) ((void)0) #define audit_mq_sendrecv(d,l,p,t) ((void)0) #define audit_mq_notify(d,n) ((void)0) -- cgit v1.2.3 From a4ff8dba7d8ce5ceb43fb27df66292251cc73bdc Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Tue, 3 Jan 2012 14:23:07 -0500 Subject: audit: inline audit_free to simplify the look of generic code make the conditional a static inline instead of doing it in generic code. Signed-off-by: Eric Paris --- include/linux/audit.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/audit.h b/include/linux/audit.h index 4f1efe3e8616..8eb8bda749b3 100644 --- a/include/linux/audit.h +++ b/include/linux/audit.h @@ -417,7 +417,7 @@ extern int audit_classify_arch(int arch); /* Public API */ extern void audit_finish_fork(struct task_struct *child); extern int audit_alloc(struct task_struct *task); -extern void audit_free(struct task_struct *task); +extern void __audit_free(struct task_struct *task); extern void __audit_syscall_entry(int arch, int major, unsigned long a0, unsigned long a1, unsigned long a2, unsigned long a3); @@ -435,6 +435,11 @@ static inline int audit_dummy_context(void) void *p = current->audit_context; return !p || *(int *)p; } +static inline void audit_free(struct task_struct *task) +{ + if (unlikely(task->audit_context)) + __audit_free(task); +} static inline void audit_syscall_entry(int arch, int major, unsigned long a0, unsigned long a1, unsigned long a2, unsigned long a3) -- cgit v1.2.3 From 6422e78de6880c66a82af512d9bd0c85eb62e661 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Tue, 3 Jan 2012 14:23:07 -0500 Subject: audit: remove audit_finish_fork as it can't be called Audit entry,always rules are not allowed and are automatically changed in exit,always rules in userspace. The kernel refuses to load such rules. Thus a task in the middle of a syscall (and thus in audit_finish_fork()) can only be in one of two states: AUDIT_BUILD_CONTEXT or AUDIT_DISABLED. Since the current task cannot be in AUDIT_RECORD_CONTEXT we aren't every going to actually use the code in audit_finish_fork() since it will return without doing anything. Thus drop the code. Signed-off-by: Eric Paris --- include/linux/audit.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/audit.h b/include/linux/audit.h index 8eb8bda749b3..67b66c37a254 100644 --- a/include/linux/audit.h +++ b/include/linux/audit.h @@ -415,7 +415,6 @@ extern int audit_classify_arch(int arch); #ifdef CONFIG_AUDITSYSCALL /* These are defined in auditsc.c */ /* Public API */ -extern void audit_finish_fork(struct task_struct *child); extern int audit_alloc(struct task_struct *task); extern void __audit_free(struct task_struct *task); extern void __audit_syscall_entry(int arch, @@ -586,7 +585,6 @@ static inline void audit_mmap_fd(int fd, int flags) extern int audit_n_rules; extern int audit_signals; #else /* CONFIG_AUDITSYSCALL */ -#define audit_finish_fork(t) #define audit_alloc(t) ({ 0; }) #define audit_free(t) do { ; } while (0) #define audit_syscall_entry(ta,a,b,c,d,e) do { ; } while (0) -- cgit v1.2.3 From efaffd6e4417860c67576ac760dd6e8bbd15f006 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Tue, 3 Jan 2012 14:23:07 -0500 Subject: audit: allow matching on obj_uid Allow syscall exit filter matching based on the uid of the owner of an inode used in a syscall. aka: auditctl -a always,exit -S open -F obj_uid=0 -F perm=wa Signed-off-by: Eric Paris --- include/linux/audit.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/audit.h b/include/linux/audit.h index 67b66c37a254..55cb3daaf474 100644 --- a/include/linux/audit.h +++ b/include/linux/audit.h @@ -223,6 +223,7 @@ #define AUDIT_PERM 106 #define AUDIT_DIR 107 #define AUDIT_FILETYPE 108 +#define AUDIT_OBJ_UID 109 #define AUDIT_ARG0 200 #define AUDIT_ARG1 (AUDIT_ARG0+1) -- cgit v1.2.3 From 54d3218b31aee5bc9c859ae60fbde933d922448b Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Tue, 3 Jan 2012 14:23:07 -0500 Subject: audit: allow audit matching on inode gid Much like the ability to filter audit on the uid of an inode collected, we should be able to filter on the gid of the inode. Signed-off-by: Eric Paris --- include/linux/audit.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/audit.h b/include/linux/audit.h index 55cb3daaf474..e36aa37c88af 100644 --- a/include/linux/audit.h +++ b/include/linux/audit.h @@ -224,6 +224,7 @@ #define AUDIT_DIR 107 #define AUDIT_FILETYPE 108 #define AUDIT_OBJ_UID 109 +#define AUDIT_OBJ_GID 110 #define AUDIT_ARG0 200 #define AUDIT_ARG1 (AUDIT_ARG0+1) -- cgit v1.2.3 From 0a300be6d5be8f66cd96609334710c268d0bfdce Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Tue, 3 Jan 2012 14:23:08 -0500 Subject: audit: remove task argument to audit_set_loginuid The function always deals with current. Don't expose an option pretending one can use it for something. You can't. Signed-off-by: Eric Paris --- include/linux/audit.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/audit.h b/include/linux/audit.h index e36aa37c88af..7cbd6fe41573 100644 --- a/include/linux/audit.h +++ b/include/linux/audit.h @@ -489,7 +489,7 @@ static inline void audit_ptrace(struct task_struct *t) extern unsigned int audit_serial(void); extern int auditsc_get_stamp(struct audit_context *ctx, struct timespec *t, unsigned int *serial); -extern int audit_set_loginuid(struct task_struct *task, uid_t loginuid); +extern int audit_set_loginuid(uid_t loginuid); #define audit_get_loginuid(t) ((t)->loginuid) #define audit_get_sessionid(t) ((t)->sessionid) extern void audit_log_task_context(struct audit_buffer *ab); -- cgit v1.2.3 From 02d86a568c6d2d335256864451ac8ce781bc5652 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Tue, 3 Jan 2012 14:23:08 -0500 Subject: audit: allow interfield comparison in audit rules We wish to be able to audit when a uid=500 task accesses a file which is uid=0. Or vice versa. This patch introduces a new audit filter type AUDIT_FIELD_COMPARE which takes as an 'enum' which indicates which fields should be compared. At this point we only define the task->uid vs inode->uid, but other comparisons can be added. Signed-off-by: Eric Paris --- include/linux/audit.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/audit.h b/include/linux/audit.h index 7cbd6fe41573..838e05fc0582 100644 --- a/include/linux/audit.h +++ b/include/linux/audit.h @@ -182,7 +182,10 @@ * AUDIT_UNUSED_BITS is updated if need be. */ #define AUDIT_UNUSED_BITS 0x07FFFC00 +/* AUDIT_FIELD_COMPARE rule list */ +#define AUDIT_COMPARE_UID_TO_OBJ_UID 1 +#define AUDIT_MAX_FIELD_COMPARE AUDIT_COMPARE_UID_TO_OBJ_UID /* Rule fields */ /* These are useful when checking the * task structure at task creation time @@ -225,6 +228,7 @@ #define AUDIT_FILETYPE 108 #define AUDIT_OBJ_UID 109 #define AUDIT_OBJ_GID 110 +#define AUDIT_FIELD_COMPARE 111 #define AUDIT_ARG0 200 #define AUDIT_ARG1 (AUDIT_ARG0+1) -- cgit v1.2.3 From c9fe685f7a17a0ee8bf3fbe51e40b1c8b8e65896 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Tue, 3 Jan 2012 14:23:08 -0500 Subject: audit: allow interfield comparison between gid and ogid Allow audit rules to compare the gid of the running task to the gid of the inode in question. Signed-off-by: Eric Paris --- include/linux/audit.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/audit.h b/include/linux/audit.h index 838e05fc0582..fffbc2176ee1 100644 --- a/include/linux/audit.h +++ b/include/linux/audit.h @@ -184,8 +184,9 @@ /* AUDIT_FIELD_COMPARE rule list */ #define AUDIT_COMPARE_UID_TO_OBJ_UID 1 +#define AUDIT_COMPARE_GID_TO_OBJ_GID 2 -#define AUDIT_MAX_FIELD_COMPARE AUDIT_COMPARE_UID_TO_OBJ_UID +#define AUDIT_MAX_FIELD_COMPARE AUDIT_COMPARE_GID_TO_OBJ_GID /* Rule fields */ /* These are useful when checking the * task structure at task creation time -- cgit v1.2.3 From 4a6633ed08af5ba67790b4d1adcdeb8ceb55677e Mon Sep 17 00:00:00 2001 From: Peter Moody Date: Tue, 13 Dec 2011 16:17:51 -0800 Subject: audit: implement all object interfield comparisons This completes the matrix of interfield comparisons between uid/gid information for the current task and the uid/gid information for inodes. aka I can audit based on differences between the euid of the process and the uid of fs objects. Signed-off-by: Peter Moody Signed-off-by: Eric Paris --- include/linux/audit.h | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/audit.h b/include/linux/audit.h index fffbc2176ee1..67113cb4bc15 100644 --- a/include/linux/audit.h +++ b/include/linux/audit.h @@ -185,8 +185,16 @@ /* AUDIT_FIELD_COMPARE rule list */ #define AUDIT_COMPARE_UID_TO_OBJ_UID 1 #define AUDIT_COMPARE_GID_TO_OBJ_GID 2 +#define AUDIT_COMPARE_EUID_TO_OBJ_UID 3 +#define AUDIT_COMPARE_EGID_TO_OBJ_GID 4 +#define AUDIT_COMPARE_AUID_TO_OBJ_UID 5 +#define AUDIT_COMPARE_SUID_TO_OBJ_UID 6 +#define AUDIT_COMPARE_SGID_TO_OBJ_GID 7 +#define AUDIT_COMPARE_FSUID_TO_OBJ_UID 8 +#define AUDIT_COMPARE_FSGID_TO_OBJ_GID 9 + +#define AUDIT_MAX_FIELD_COMPARE AUDIT_COMPARE_FSGID_TO_OBJ_GID -#define AUDIT_MAX_FIELD_COMPARE AUDIT_COMPARE_GID_TO_OBJ_GID /* Rule fields */ /* These are useful when checking the * task structure at task creation time -- cgit v1.2.3 From 10d68360871657204885371cdf2594412675d2f9 Mon Sep 17 00:00:00 2001 From: Peter Moody Date: Wed, 4 Jan 2012 15:24:31 -0500 Subject: audit: comparison on interprocess fields This allows audit to specify rules in which we compare two fields of a process. Such as is the running process uid != to the running process euid? Signed-off-by: Peter Moody Signed-off-by: Eric Paris --- include/linux/audit.h | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/audit.h b/include/linux/audit.h index 67113cb4bc15..9ff7a2c48b50 100644 --- a/include/linux/audit.h +++ b/include/linux/audit.h @@ -193,7 +193,29 @@ #define AUDIT_COMPARE_FSUID_TO_OBJ_UID 8 #define AUDIT_COMPARE_FSGID_TO_OBJ_GID 9 -#define AUDIT_MAX_FIELD_COMPARE AUDIT_COMPARE_FSGID_TO_OBJ_GID +#define AUDIT_COMPARE_UID_TO_AUID 10 +#define AUDIT_COMPARE_UID_TO_EUID 11 +#define AUDIT_COMPARE_UID_TO_FSUID 12 +#define AUDIT_COMPARE_UID_TO_SUID 13 + +#define AUDIT_COMPARE_AUID_TO_FSUID 14 +#define AUDIT_COMPARE_AUID_TO_SUID 15 +#define AUDIT_COMPARE_AUID_TO_EUID 16 + +#define AUDIT_COMPARE_EUID_TO_SUID 17 +#define AUDIT_COMPARE_EUID_TO_FSUID 18 + +#define AUDIT_COMPARE_SUID_TO_FSUID 19 + +#define AUDIT_COMPARE_GID_TO_EGID 20 +#define AUDIT_COMPARE_GID_TO_FSGID 21 +#define AUDIT_COMPARE_GID_TO_SGID 22 + +#define AUDIT_COMPARE_EGID_TO_FSGID 23 +#define AUDIT_COMPARE_EGID_TO_SGID 24 +#define AUDIT_COMPARE_SGID_TO_FSGID 25 + +#define AUDIT_MAX_FIELD_COMPARE AUDIT_COMPARE_SGID_TO_FSGID /* Rule fields */ /* These are useful when checking the -- cgit v1.2.3 From 67175b855bfd6ed95ffeff95532173c07de6432d Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Tue, 17 Jan 2012 21:14:05 +0000 Subject: Fix compile breakage with kref.h This set of build failures just started appearing on parisc: In file included from drivers/input/serio/serio_raw.c:12: include/linux/kref.h: In function 'kref_get': include/linux/kref.h:40: error: 'TAINT_WARN' undeclared (first use in this function) include/linux/kref.h:40: error: (Each undeclared identifier is reported only once include/linux/kref.h:40: error: for each function it appears in.) include/linux/kref.h: In function 'kref_sub': include/linux/kref.h:65: error: 'TAINT_WARN' undeclared (first use in this function) It happens because TAINT_WARN is defined in kernel.h and this particular compile doesn't seem to include it (no idea why it's just manifesting .. probably some #include file untangling exposed it). Fix by adding #include to linux/kref.h Signed-off-by: James Bottomley Acked-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- include/linux/kref.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/kref.h b/include/linux/kref.h index abc0120b09b7..9c07dcebded7 100644 --- a/include/linux/kref.h +++ b/include/linux/kref.h @@ -17,6 +17,7 @@ #include #include +#include struct kref { atomic_t refcount; -- cgit v1.2.3 From ee0b31a25a010116f44fca6c96f4516d417793dd Mon Sep 17 00:00:00 2001 From: Mimi Zohar Date: Tue, 17 Jan 2012 20:39:51 +0000 Subject: keys: fix trusted/encrypted keys sparse rcu_assign_pointer messages Define rcu_assign_keypointer(), which uses the key payload.rcudata instead of payload.data, to resolve the CONFIG_SPARSE_RCU_POINTER message: "incompatible types in comparison expression (different address spaces)" Replace the rcu_assign_pointer() calls in encrypted/trusted keys with rcu_assign_keypointer(). Signed-off-by: Mimi Zohar Signed-off-by: David Howells Signed-off-by: James Morris --- include/linux/key.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/key.h b/include/linux/key.h index 183a6af7715d..bfc014c57351 100644 --- a/include/linux/key.h +++ b/include/linux/key.h @@ -293,6 +293,9 @@ static inline bool key_is_instantiated(const struct key *key) (rcu_dereference_protected((KEY)->payload.rcudata, \ rwsem_is_locked(&((struct key *)(KEY))->sem))) +#define rcu_assign_keypointer(KEY, PAYLOAD) \ + (rcu_assign_pointer((KEY)->payload.rcudata, PAYLOAD)) + #ifdef CONFIG_SYSCTL extern ctl_table key_sysctls[]; #endif -- cgit v1.2.3 From 5e8898e97a5db4125d944070922164d1d09a2689 Mon Sep 17 00:00:00 2001 From: Dmitry Kasatkin Date: Tue, 17 Jan 2012 17:12:03 +0200 Subject: lib: digital signature config option name change It was reported that DIGSIG is confusing name for digital signature module. It was suggested to rename DIGSIG to SIGNATURE. Requested-by: Linus Torvalds Suggested-by: Pavel Machek Signed-off-by: Dmitry Kasatkin Signed-off-by: James Morris --- include/linux/digsig.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/digsig.h b/include/linux/digsig.h index efae755017d7..b01558b15814 100644 --- a/include/linux/digsig.h +++ b/include/linux/digsig.h @@ -46,7 +46,7 @@ struct signature_hdr { char mpi[0]; } __packed; -#if defined(CONFIG_DIGSIG) || defined(CONFIG_DIGSIG_MODULE) +#if defined(CONFIG_SIGNATURE) || defined(CONFIG_SIGNATURE_MODULE) int digsig_verify(struct key *keyring, const char *sig, int siglen, const char *digest, int digestlen); @@ -59,6 +59,6 @@ static inline int digsig_verify(struct key *keyring, const char *sig, return -EOPNOTSUPP; } -#endif /* CONFIG_DIGSIG */ +#endif /* CONFIG_SIGNATURE */ #endif /* _DIGSIG_H */ -- cgit v1.2.3 From 65b7f839ceecc0a36c7969c0c9151d5748cd4242 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Tue, 17 Jan 2012 22:40:08 +0100 Subject: intel_idle: Split up and provide per CPU initialization func Function split up, should have no functional change. Provides entry point for physically hotplugged CPUs to initialize and activate cpuidle. Signed-off-by: Thomas Renninger CC: Deepthi Dharwar CC: Shaohua Li CC: Andrew Morton Signed-off-by: Len Brown --- include/linux/cpuidle.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index 7408af843b8a..93df66ea794a 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -188,7 +188,14 @@ struct cpuidle_governor { extern int cpuidle_register_governor(struct cpuidle_governor *gov); extern void cpuidle_unregister_governor(struct cpuidle_governor *gov); +#ifdef CONFIG_INTEL_IDLE +extern int intel_idle_cpu_init(int cpu); #else +static inline int intel_idle_cpu_init(int cpu) { return -1; } +#endif + +#else +static inline int intel_idle_cpu_init(int cpu) { return -1; } static inline int cpuidle_register_governor(struct cpuidle_governor *gov) {return 0;} -- cgit v1.2.3 From 456a8167e94b66f406c27400a46a707b870452b0 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 18 Jan 2012 10:04:29 +0000 Subject: KEYS: Permit key_serial() to be called with a const key pointer Permit key_serial() to be called with a const key pointer. Signed-off-by: David Howells Signed-off-by: James Morris --- include/linux/key.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/key.h b/include/linux/key.h index bfc014c57351..5253471cd2ea 100644 --- a/include/linux/key.h +++ b/include/linux/key.h @@ -271,7 +271,7 @@ extern int keyring_add_key(struct key *keyring, extern struct key *key_lookup(key_serial_t id); -static inline key_serial_t key_serial(struct key *key) +static inline key_serial_t key_serial(const struct key *key) { return key ? key->serial : 0; } -- cgit v1.2.3 From 72081624d5ad3cf56deb6e727b78c4e7a55e4eec Mon Sep 17 00:00:00 2001 From: "Srivatsa S. Bhat" Date: Thu, 19 Jan 2012 23:25:33 +0100 Subject: PM / Hibernate: Rewrite unlock_system_sleep() to fix s2disk regression Commit 33e638b, "PM / Sleep: Use the freezer_count() functions in [un]lock_system_sleep() APIs" introduced an undesirable change in the behaviour of unlock_system_sleep() since freezer_count() internally calls try_to_freeze() - which we don't need in unlock_system_sleep(). And commit bcda53f, "PM / Sleep: Replace mutex_[un]lock(&pm_mutex) with [un]lock_system_sleep()" made these APIs wide-spread. This caused a regression in suspend-to-disk where snapshot_read() and snapshot_write() were getting frozen due to the try_to_freeze embedded in unlock_system_sleep(), since these functions were invoked when the freezing condition was still in effect. Fix this by rewriting unlock_system_sleep() by open-coding freezer_count() and dropping the try_to_freeze() part. Not only will this fix the regression but this will also ensure that the API only does what it is intended to do, and nothing more, under the hood. While at it, make the code more correct and robust by ensuring that the PF_FREEZER_SKIP flag gets cleared with pm_mutex held, to avoid a race with the freezer. Also, to be on the safer side, open-code freezer_do_not_count() as well (inside lock_system_sleep()), to ensure that any unrelated modification to freezer[_do_not]_count() does not break things again! Reported-and-tested-by: Rafael J. Wysocki Signed-off-by: Srivatsa S. Bhat Acked-by: Tejun Heo Signed-off-by: Rafael J. Wysocki --- include/linux/suspend.h | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/suspend.h b/include/linux/suspend.h index 95040cc33107..91784a4f8608 100644 --- a/include/linux/suspend.h +++ b/include/linux/suspend.h @@ -357,14 +357,29 @@ extern bool pm_save_wakeup_count(unsigned int count); static inline void lock_system_sleep(void) { - freezer_do_not_count(); + current->flags |= PF_FREEZER_SKIP; mutex_lock(&pm_mutex); } static inline void unlock_system_sleep(void) { + /* + * Don't use freezer_count() because we don't want the call to + * try_to_freeze() here. + * + * Reason: + * Fundamentally, we just don't need it, because freezing condition + * doesn't come into effect until we release the pm_mutex lock, + * since the freezer always works with pm_mutex held. + * + * More importantly, in the case of hibernation, + * unlock_system_sleep() gets called in snapshot_read() and + * snapshot_write() when the freezing condition is still in effect. + * Which means, if we use try_to_freeze() here, it would make them + * enter the refrigerator, thus causing hibernation to lockup. + */ + current->flags &= ~PF_FREEZER_SKIP; mutex_unlock(&pm_mutex); - freezer_count(); } #else /* !CONFIG_PM_SLEEP */ -- cgit v1.2.3 From 93ece0c1a7ace88f10411dbb5643d2aa2fe00ebf Mon Sep 17 00:00:00 2001 From: Eugenia Emantayev Date: Thu, 19 Jan 2012 09:45:05 +0000 Subject: mlx4_en: eth statistics modification In native mode display all available staticstics. In SRIOV mode on VF display only SW counters statistics, in SRIOV mode on hypervisor display SW counters and errors (got from FW) statistics. Signed-off-by: Eugenia Emantayev Reviewed-by: Yevgeny Petrilin Signed-off-by: David S. Miller --- include/linux/mlx4/device.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index 5c4fe8e5bfe5..aea61905499b 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -621,6 +621,7 @@ void mlx4_unregister_mac(struct mlx4_dev *dev, u8 port, u64 mac); int mlx4_replace_mac(struct mlx4_dev *dev, u8 port, int qpn, u64 new_mac); int mlx4_get_eth_qp(struct mlx4_dev *dev, u8 port, u64 mac, int *qpn); void mlx4_put_eth_qp(struct mlx4_dev *dev, u8 port, u64 mac, int qpn); +void mlx4_set_stats_bitmap(struct mlx4_dev *dev, u64 *stats_bitmap); int mlx4_find_cached_vlan(struct mlx4_dev *dev, u8 port, u16 vid, int *idx); int mlx4_register_vlan(struct mlx4_dev *dev, u8 port, u16 vlan, int *index); -- cgit v1.2.3 From 974c12360dfe6ab01201fe9e708e7755c413f8b6 Mon Sep 17 00:00:00 2001 From: Yuchung Cheng Date: Thu, 19 Jan 2012 14:42:21 +0000 Subject: tcp: detect loss above high_seq in recovery Correctly implement a loss detection heuristic: New sequences (above high_seq) sent during the fast recovery are deemed lost when higher sequences are SACKed. Current code does not catch these losses, because tcp_mark_head_lost() does not check packets beyond high_seq. The fix is straight-forward by checking packets until the highest sacked packet. In addition, all the FLAG_DATA_LOST logic are in-effective and redundant and can be removed. Update the loss heuristic comments. The algorithm above is documented as heuristic B, but it is redundant too because heuristic A already covers B. Note that this change only marks some forward-retransmitted packets LOST. It does NOT forbid TCP performing further CWR on new losses. A potential follow-up patch under preparation is to perform another CWR on "new" losses such as 1) sequence above high_seq is lost (by resetting high_seq to snd_nxt) 2) retransmission is lost. Signed-off-by: Yuchung Cheng Signed-off-by: David S. Miller --- include/linux/snmp.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/snmp.h b/include/linux/snmp.h index e16557a357e5..c1241c428179 100644 --- a/include/linux/snmp.h +++ b/include/linux/snmp.h @@ -192,7 +192,6 @@ enum LINUX_MIB_TCPPARTIALUNDO, /* TCPPartialUndo */ LINUX_MIB_TCPDSACKUNDO, /* TCPDSACKUndo */ LINUX_MIB_TCPLOSSUNDO, /* TCPLossUndo */ - LINUX_MIB_TCPLOSS, /* TCPLoss */ LINUX_MIB_TCPLOSTRETRANSMIT, /* TCPLostRetransmit */ LINUX_MIB_TCPRENOFAILURES, /* TCPRenoFailures */ LINUX_MIB_TCPSACKFAILURES, /* TCPSackFailures */ -- cgit v1.2.3 From 8cfd14ad1eb52e44cb1fe7b47a68126e45e04026 Mon Sep 17 00:00:00 2001 From: Glauber Costa Date: Fri, 20 Jan 2012 04:57:15 +0000 Subject: cgroup: make sure memcg margin is 0 when over limit For the memcg sock code, we'll need to register allocations that are temporarily over limit. Let's make sure that margin is 0 in this case. I am keeping this as a separate patch, so that if any weirdness interaction appears in the future, we can now exactly what caused it. Suggested by Johannes Weiner Signed-off-by: Glauber Costa CC: KAMEZAWA Hiroyuki CC: Johannes Weiner CC: Michal Hocko CC: Tejun Heo CC: Li Zefan Acked-by: Tejun Heo Signed-off-by: David S. Miller --- include/linux/res_counter.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/res_counter.h b/include/linux/res_counter.h index c9d625ca659e..d06d014afda6 100644 --- a/include/linux/res_counter.h +++ b/include/linux/res_counter.h @@ -142,7 +142,10 @@ static inline unsigned long long res_counter_margin(struct res_counter *cnt) unsigned long flags; spin_lock_irqsave(&cnt->lock, flags); - margin = cnt->limit - cnt->usage; + if (cnt->limit > cnt->usage) + margin = cnt->limit - cnt->usage; + else + margin = 0; spin_unlock_irqrestore(&cnt->lock, flags); return margin; } -- cgit v1.2.3 From 0e90b31f4ba77027a7c21cbfc66404df0851ca21 Mon Sep 17 00:00:00 2001 From: Glauber Costa Date: Fri, 20 Jan 2012 04:57:16 +0000 Subject: net: introduce res_counter_charge_nofail() for socket allocations There is a case in __sk_mem_schedule(), where an allocation is beyond the maximum, but yet we are allowed to proceed. It happens under the following condition: sk->sk_wmem_queued + size >= sk->sk_sndbuf The network code won't revert the allocation in this case, meaning that at some point later it'll try to do it. Since this is never communicated to the underlying res_counter code, there is an inbalance in res_counter uncharge operation. I see two ways of fixing this: 1) storing the information about those allocations somewhere in memcg, and then deducting from that first, before we start draining the res_counter, 2) providing a slightly different allocation function for the res_counter, that matches the original behavior of the network code more closely. I decided to go for #2 here, believing it to be more elegant, since #1 would require us to do basically that, but in a more obscure way. Signed-off-by: Glauber Costa Cc: KAMEZAWA Hiroyuki Cc: Johannes Weiner Cc: Michal Hocko CC: Tejun Heo CC: Li Zefan CC: Laurent Chavey Acked-by: Tejun Heo Signed-off-by: David S. Miller --- include/linux/res_counter.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/res_counter.h b/include/linux/res_counter.h index d06d014afda6..da81af086eaf 100644 --- a/include/linux/res_counter.h +++ b/include/linux/res_counter.h @@ -109,12 +109,18 @@ void res_counter_init(struct res_counter *counter, struct res_counter *parent); * * returns 0 on success and <0 if the counter->usage will exceed the * counter->limit _locked call expects the counter->lock to be taken + * + * charge_nofail works the same, except that it charges the resource + * counter unconditionally, and returns < 0 if the after the current + * charge we are over limit. */ int __must_check res_counter_charge_locked(struct res_counter *counter, unsigned long val); int __must_check res_counter_charge(struct res_counter *counter, unsigned long val, struct res_counter **limit_fail_at); +int __must_check res_counter_charge_nofail(struct res_counter *counter, + unsigned long val, struct res_counter **limit_fail_at); /* * uncharge - tell that some portion of the resource is released -- cgit v1.2.3 From 6536e3123e5d3371a6f52e32a3d0694bcc987702 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Fri, 20 Jan 2012 14:33:53 -0800 Subject: mm: fix warnings regarding enum migrate_mode sparc64 allmodconfig: In file included from include/linux/compat.h:15, from /usr/src/25/arch/sparc/include/asm/siginfo.h:19, from include/linux/signal.h:5, from include/linux/sched.h:73, from arch/sparc/kernel/asm-offsets.c:13: include/linux/fs.h:618: warning: parameter has incomplete type It seems that my sparc64 compiler (gcc-3.4.5) doesn't like the forward declaration of enums. Fix this by moving the "enum migrate_mode" definition into its own header file. Acked-by: Mel Gorman Cc: Rik van Riel Cc: Andrea Arcangeli Cc: Minchan Kim Cc: Dave Jones Cc: Jan Kara Cc: Andy Isaacson Cc: Nai Xia Cc: Johannes Weiner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/fs.h | 2 +- include/linux/migrate.h | 14 +------------- include/linux/migrate_mode.h | 16 ++++++++++++++++ 3 files changed, 18 insertions(+), 14 deletions(-) create mode 100644 include/linux/migrate_mode.h (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 0244082d42c5..4b3a41fe22bf 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -10,6 +10,7 @@ #include #include #include +#include /* * It's silly to have NR_OPEN bigger than NR_FILE, but you can change @@ -526,7 +527,6 @@ enum positive_aop_returns { struct page; struct address_space; struct writeback_control; -enum migrate_mode; struct iov_iter { const struct iovec *iov; diff --git a/include/linux/migrate.h b/include/linux/migrate.h index eaf867412f7a..05ed2828a553 100644 --- a/include/linux/migrate.h +++ b/include/linux/migrate.h @@ -3,22 +3,10 @@ #include #include +#include typedef struct page *new_page_t(struct page *, unsigned long private, int **); -/* - * MIGRATE_ASYNC means never block - * MIGRATE_SYNC_LIGHT in the current implementation means to allow blocking - * on most operations but not ->writepage as the potential stall time - * is too significant - * MIGRATE_SYNC will block when migrating pages - */ -enum migrate_mode { - MIGRATE_ASYNC, - MIGRATE_SYNC_LIGHT, - MIGRATE_SYNC, -}; - #ifdef CONFIG_MIGRATION #define PAGE_MIGRATION 1 diff --git a/include/linux/migrate_mode.h b/include/linux/migrate_mode.h new file mode 100644 index 000000000000..ebf3d89a3919 --- /dev/null +++ b/include/linux/migrate_mode.h @@ -0,0 +1,16 @@ +#ifndef MIGRATE_MODE_H_INCLUDED +#define MIGRATE_MODE_H_INCLUDED +/* + * MIGRATE_ASYNC means never block + * MIGRATE_SYNC_LIGHT in the current implementation means to allow blocking + * on most operations but not ->writepage as the potential stall time + * is too significant + * MIGRATE_SYNC will block when migrating pages + */ +enum migrate_mode { + MIGRATE_ASYNC, + MIGRATE_SYNC_LIGHT, + MIGRATE_SYNC, +}; + +#endif /* MIGRATE_MODE_H_INCLUDED */ -- cgit v1.2.3 From cb78edfdcef5259ac9e9088bd63810d21299928d Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Fri, 20 Jan 2012 14:34:16 -0800 Subject: kdump: define KEXEC_NOTE_BYTES arch specific for s390x kdump only allocates memory for the prstatus ELF note. For s390x, besides of prstatus multiple ELF notes for various different register types are stored. Therefore the currently allocated memory is not sufficient. With this patch the KEXEC_NOTE_BYTES macro can be defined by architecture code and for s390x it is set to the correct size now. Signed-off-by: Michael Holzheu Cc: "Eric W. Biederman" Cc: Vivek Goyal Cc: Martin Schwidefsky Cc: Heiko Carstens Reviewed-by: Simon Horman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kexec.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/kexec.h b/include/linux/kexec.h index 2fa0901219d4..0d7d6a1b172f 100644 --- a/include/linux/kexec.h +++ b/include/linux/kexec.h @@ -50,9 +50,11 @@ * note header. For kdump, the code in vmcore.c runs in the context * of the second kernel to combine them into one note. */ +#ifndef KEXEC_NOTE_BYTES #define KEXEC_NOTE_BYTES ( (KEXEC_NOTE_HEAD_BYTES * 2) + \ KEXEC_CORE_NOTE_NAME_BYTES + \ KEXEC_CORE_NOTE_DESC_BYTES ) +#endif /* * This structure is used to hold the arguments that are used when loading -- cgit v1.2.3 From 245132643e1cfcd145bbc86a716c1818371fcb93 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Fri, 20 Jan 2012 14:34:21 -0800 Subject: SHM_UNLOCK: fix Unevictable pages stranded after swap Commit cc39c6a9bbde ("mm: account skipped entries to avoid looping in find_get_pages") correctly fixed an infinite loop; but left a problem that find_get_pages() on shmem would return 0 (appearing to callers to mean end of tree) when it meets a run of nr_pages swap entries. The only uses of find_get_pages() on shmem are via pagevec_lookup(), called from invalidate_mapping_pages(), and from shmctl SHM_UNLOCK's scan_mapping_unevictable_pages(). The first is already commented, and not worth worrying about; but the second can leave pages on the Unevictable list after an unusual sequence of swapping and locking. Fix that by using shmem_find_get_pages_and_swap() (then ignoring the swap) instead of pagevec_lookup(). But I don't want to contaminate vmscan.c with shmem internals, nor shmem.c with LRU locking. So move scan_mapping_unevictable_pages() into shmem.c, renaming it shmem_unlock_mapping(); and rename check_move_unevictable_page() to check_move_unevictable_pages(), looping down an array of pages, oftentimes under the same lock. Leave out the "rotate unevictable list" block: that's a leftover from when this was used for /proc/sys/vm/scan_unevictable_pages, whose flawed handling involved looking at pages at tail of LRU. Was there significance to the sequence first ClearPageUnevictable, then test page_evictable, then SetPageUnevictable here? I think not, we're under LRU lock, and have no barriers between those. Signed-off-by: Hugh Dickins Reviewed-by: KOSAKI Motohiro Cc: Minchan Kim Cc: Rik van Riel Cc: Shaohua Li Cc: Eric Dumazet Cc: Johannes Weiner Cc: Michel Lespinasse Cc: [back to 3.1 but will need respins] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/shmem_fs.h | 1 + include/linux/swap.h | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/shmem_fs.h b/include/linux/shmem_fs.h index e4c711c6f321..79ab2555b3b0 100644 --- a/include/linux/shmem_fs.h +++ b/include/linux/shmem_fs.h @@ -48,6 +48,7 @@ extern struct file *shmem_file_setup(const char *name, loff_t size, unsigned long flags); extern int shmem_zero_setup(struct vm_area_struct *); extern int shmem_lock(struct file *file, int lock, struct user_struct *user); +extern void shmem_unlock_mapping(struct address_space *mapping); extern struct page *shmem_read_mapping_page_gfp(struct address_space *mapping, pgoff_t index, gfp_t gfp_mask); extern void shmem_truncate_range(struct inode *inode, loff_t start, loff_t end); diff --git a/include/linux/swap.h b/include/linux/swap.h index 06061a7f8e69..3e60228e7299 100644 --- a/include/linux/swap.h +++ b/include/linux/swap.h @@ -273,7 +273,7 @@ static inline int zone_reclaim(struct zone *z, gfp_t mask, unsigned int order) #endif extern int page_evictable(struct page *page, struct vm_area_struct *vma); -extern void scan_mapping_unevictable_pages(struct address_space *); +extern void check_move_unevictable_pages(struct page **, int nr_pages); extern unsigned long scan_unevictable_pages; extern int scan_unevictable_handler(struct ctl_table *, int, -- cgit v1.2.3 From 2eda013f4894bc200124f791a56c4defb613a0cc Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 21 Jan 2012 11:02:51 -0800 Subject: kernel-doc: fix new warnings in device.h Fix new kernel-doc warnings: Warning(include/linux/device.h:299): No description found for parameter 'name' Warning(include/linux/device.h:299): No description found for parameter 'subsys' Warning(include/linux/device.h:299): No description found for parameter 'node' Warning(include/linux/device.h:299): No description found for parameter 'add_dev' Warning(include/linux/device.h:299): No description found for parameter 'remove_dev' Warning(include/linux/device.h:685): No description found for parameter 'id' Warning(include/linux/device.h:1009): No description found for parameter '__driver' Warning(include/linux/device.h:1009): No description found for parameter '__register' Warning(include/linux/device.h:1009): No description found for parameter '__unregister' Signed-off-by: Randy Dunlap Cc: Lars-Peter Clausen Cc: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- include/linux/device.h | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/device.h b/include/linux/device.h index 5b3adb8f9588..b63fb393aa58 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -279,11 +279,11 @@ struct device *driver_find_device(struct device_driver *drv, /** * struct subsys_interface - interfaces to device functions - * @name name of the device function - * @subsystem subsytem of the devices to attach to - * @node the list of functions registered at the subsystem - * @add device hookup to device function handler - * @remove device hookup to device function handler + * @name: name of the device function + * @subsys: subsytem of the devices to attach to + * @node: the list of functions registered at the subsystem + * @add_dev: device hookup to device function handler + * @remove_dev: device hookup to device function handler * * Simple interfaces attached to a subsystem. Multiple interfaces can * attach to a subsystem and its devices. Unlike drivers, they do not @@ -612,6 +612,7 @@ struct device_dma_parameters { * @archdata: For arch-specific additions. * @of_node: Associated device tree node. * @devt: For creating the sysfs "dev". + * @id: device instance * @devres_lock: Spinlock to protect the resource of the device. * @devres_head: The resources list of the device. * @knode_class: The node used to add the device to the class list. @@ -1003,6 +1004,10 @@ extern long sysfs_deprecated; * Each module may only use this macro once, and calling it replaces * module_init() and module_exit(). * + * @__driver: driver name + * @__register: register function for this driver type + * @__unregister: unregister function for this driver type + * * Use this macro to construct bus specific macros for registering * drivers, and do not use it on its own. */ -- cgit v1.2.3 From 4d922612df8bd1202a1f51d95b78aca3d67302cd Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 21 Jan 2012 11:02:56 -0800 Subject: kernel-doc: fix new warning in usb.h Fix new kernel-doc warning: Warning(include/linux/usb.h:1251): No description found for parameter 'num_mapped_sgs' Signed-off-by: Randy Dunlap Cc: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- include/linux/usb.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/usb.h b/include/linux/usb.h index 27a4e16d2bf1..69d845739bc2 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -1073,6 +1073,7 @@ typedef void (*usb_complete_t)(struct urb *); * which the host controller driver should use in preference to the * transfer_buffer. * @sg: scatter gather buffer list + * @num_mapped_sgs: (internal) number of mapped sg entries * @num_sgs: number of entries in the sg list * @transfer_buffer_length: How big is transfer_buffer. The transfer may * be broken up into chunks according to the current maximum packet -- cgit v1.2.3 From fa757281a08799fd6c0f7ec6f111d1cd66afc97b Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 21 Jan 2012 11:03:13 -0800 Subject: kernel-doc: fix kernel-doc warnings in sched Fix new kernel-doc notation warnings: Warning(include/linux/sched.h:2094): No description found for parameter 'p' Warning(include/linux/sched.h:2094): Excess function parameter 'tsk' description in 'is_idle_task' Warning(kernel/sched/cpupri.c:139): No description found for parameter 'newpri' Warning(kernel/sched/cpupri.c:139): Excess function parameter 'pri' description in 'cpupri_set' Warning(kernel/sched/cpupri.c:208): Excess function parameter 'bootmem' description in 'cpupri_init' Signed-off-by: Randy Dunlap Cc: Ingo Molnar Cc: Peter Zijlstra Signed-off-by: Linus Torvalds --- include/linux/sched.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 4032ec1cf836..513f52459872 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -2088,7 +2088,7 @@ extern int sched_setscheduler_nocheck(struct task_struct *, int, extern struct task_struct *idle_task(int cpu); /** * is_idle_task - is the specified task an idle task? - * @tsk: the task in question. + * @p: the task in question. */ static inline bool is_idle_task(struct task_struct *p) { -- cgit v1.2.3 From c1aab02dac690af7ff634d8e1cb3be6a04387eef Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Tue, 24 Jan 2012 11:41:32 +1100 Subject: migrate_mode.h is not exported to user mode so move its include into fs.h inside the __KERNEL__ protection. Signed-off-by: Stephen Rothwell Signed-off-by: Linus Torvalds --- include/linux/fs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 4b3a41fe22bf..386da09f229d 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -10,7 +10,6 @@ #include #include #include -#include /* * It's silly to have NR_OPEN bigger than NR_FILE, but you can change @@ -397,6 +396,7 @@ struct inodes_stat_t { #include #include #include +#include #include -- cgit v1.2.3 From b82b9183d4f18f9b8c4bb31f223eb6c79b734eb0 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Tue, 24 Jan 2012 05:16:00 +0000 Subject: team: send only changed options/ports via netlink This patch changes event message behaviour to send only updated records instead of whole list. This fixes bug on which userspace receives non-actual data in case multiple events occur in row. Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- include/linux/if_team.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux') diff --git a/include/linux/if_team.h b/include/linux/if_team.h index 828181fbad5d..58404b0c5010 100644 --- a/include/linux/if_team.h +++ b/include/linux/if_team.h @@ -46,6 +46,10 @@ struct team_port { u32 speed; u8 duplex; + /* Custom gennetlink interface related flags */ + bool changed; + bool removed; + struct rcu_head rcu; }; @@ -72,6 +76,10 @@ struct team_option { enum team_option_type type; int (*getter)(struct team *team, void *arg); int (*setter)(struct team *team, void *arg); + + /* Custom gennetlink interface related flags */ + bool changed; + bool removed; }; struct team_mode { @@ -207,6 +215,7 @@ enum { TEAM_ATTR_OPTION_CHANGED, /* flag */ TEAM_ATTR_OPTION_TYPE, /* u8 */ TEAM_ATTR_OPTION_DATA, /* dynamic */ + TEAM_ATTR_OPTION_REMOVED, /* flag */ __TEAM_ATTR_OPTION_MAX, TEAM_ATTR_OPTION_MAX = __TEAM_ATTR_OPTION_MAX - 1, @@ -227,6 +236,7 @@ enum { TEAM_ATTR_PORT_LINKUP, /* flag */ TEAM_ATTR_PORT_SPEED, /* u32 */ TEAM_ATTR_PORT_DUPLEX, /* u8 */ + TEAM_ATTR_PORT_REMOVED, /* flag */ __TEAM_ATTR_PORT_MAX, TEAM_ATTR_PORT_MAX = __TEAM_ATTR_PORT_MAX - 1, -- cgit v1.2.3