From ead49373d2916080509f51fc6a4ee8f9bc021b9b Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Thu, 29 Oct 2020 09:57:16 +0800 Subject: mmc: core: Initial support for SD express card/host In the SD specification v7.10 the SD express card has been added. This new type of removable SD card, can be managed via a PCIe/NVMe based interface, while also allowing backwards compatibility towards the legacy SD interface. To keep the backwards compatibility, it's required to start the initialization through the legacy SD interface. If it turns out that the mmc host and the SD card, both supports the PCIe/NVMe interface, then a switch should be allowed. Therefore, let's introduce some basic support for this type of SD cards to the mmc core. The mmc host, should set MMC_CAP2_SD_EXP if it supports this interface and MMC_CAP2_SD_EXP_1_2V, if also 1.2V is supported, as to inform the core about it. To deal with the switch to the PCIe/NVMe interface, the mmc host is required to implement a new host ops, ->init_sd_express(). Based on the initial communication between the host and the card, host->ios.timing is set to either MMC_TIMING_SD_EXP or MMC_TIMING_SD_EXP_1_2V, depending on if 1.2V is supported or not. In this way, the mmc host can check these values in its ->init_sd_express() ops, to know how to proceed with the handover. Note that, to manage card insert/removal, the mmc core sticks with using the ->get_cd() callback, which means it's the host's responsibility to make sure it provides valid data, even if the card may be managed by PCIe/NVMe at the moment. As long as the card seems to be present, the mmc core keeps the card powered on. Cc: Greg Kroah-Hartman Cc: Arnd Bergmann Cc: Christoph Hellwig Cc: Rui Feng Signed-off-by: Ulf Hansson Reviewed-by: Greg Kroah-Hartman Link: https://lore.kernel.org/r/1603936636-3126-1-git-send-email-rui_feng@realsil.com.cn --- include/linux/mmc/host.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index c079b932330f..01bba36545c5 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -60,6 +60,8 @@ struct mmc_ios { #define MMC_TIMING_MMC_DDR52 8 #define MMC_TIMING_MMC_HS200 9 #define MMC_TIMING_MMC_HS400 10 +#define MMC_TIMING_SD_EXP 11 +#define MMC_TIMING_SD_EXP_1_2V 12 unsigned char signal_voltage; /* signalling voltage (1.8V or 3.3V) */ @@ -173,6 +175,9 @@ struct mmc_host_ops { */ int (*multi_io_quirk)(struct mmc_card *card, unsigned int direction, int blk_size); + + /* Initialize an SD express card, mandatory for MMC_CAP2_SD_EXP. */ + int (*init_sd_express)(struct mmc_host *host, struct mmc_ios *ios); }; struct mmc_cqe_ops { @@ -358,6 +363,8 @@ struct mmc_host { #define MMC_CAP2_HS200_1_2V_SDR (1 << 6) /* can support */ #define MMC_CAP2_HS200 (MMC_CAP2_HS200_1_8V_SDR | \ MMC_CAP2_HS200_1_2V_SDR) +#define MMC_CAP2_SD_EXP (1 << 7) /* SD express via PCIe */ +#define MMC_CAP2_SD_EXP_1_2V (1 << 8) /* SD express 1.2V */ #define MMC_CAP2_CD_ACTIVE_HIGH (1 << 10) /* Card-detect signal active high */ #define MMC_CAP2_RO_ACTIVE_HIGH (1 << 11) /* Write-protect signal active high */ #define MMC_CAP2_NO_PRESCAN_POWERUP (1 << 14) /* Don't power up before scan */ -- cgit v1.2.3 From 5afe802132f242f5520d2acac09ea05d31e3c7cf Mon Sep 17 00:00:00 2001 From: Rui Feng Date: Thu, 29 Oct 2020 09:57:48 +0800 Subject: misc: rtsx: Add SD Express mode support for RTS5261 RTS5261 support SD mode and PCIe/NVMe mode. The workflow is as follows. 1.RTS5261 work in SD mode and set MMC_CAPS2_SD_EXP flag. 2.If card is plugged in, Host send CMD8 to ask card's PCIe availability. 3.If the card has PCIe availability and WP is not set, init_sd_express() will be invoked, RTS5261 switch to PCIe/NVMe mode. 4.Mmc driver handover it to NVMe driver. 5.If card is unplugged, RTS5261 will switch to SD mode. Signed-off-by: Rui Feng Acked-by: Greg Kroah-Hartman Link: https://lore.kernel.org/r/1603936668-3363-1-git-send-email-rui_feng@realsil.com.cn Signed-off-by: Ulf Hansson --- include/linux/rtsx_pci.h | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'include/linux') diff --git a/include/linux/rtsx_pci.h b/include/linux/rtsx_pci.h index 745f5e73f99a..b47959f48ccd 100644 --- a/include/linux/rtsx_pci.h +++ b/include/linux/rtsx_pci.h @@ -658,6 +658,19 @@ #define PM_WAKE_EN 0x01 #define PM_CTRL4 0xFF47 +#define RTS5261_FW_CFG0 0xFF54 +#define RTS5261_FW_ENTER_EXPRESS (0x01 << 0) + +#define RTS5261_FW_CFG1 0xFF55 +#define RTS5261_SYS_CLK_SEL_MCU_CLK (0x01 << 7) +#define RTS5261_CRC_CLK_SEL_MCU_CLK (0x01 << 6) +#define RTS5261_FAKE_MCU_CLOCK_GATING (0x01 << 5) +#define RTS5261_MCU_BUS_SEL_MASK (0x01 << 4) +#define RTS5261_MCU_CLOCK_SEL_MASK (0x03 << 2) +#define RTS5261_MCU_CLOCK_SEL_16M (0x01 << 2) +#define RTS5261_MCU_CLOCK_GATING (0x01 << 1) +#define RTS5261_DRIVER_ENABLE_FW (0x01 << 0) + #define REG_CFG_OOBS_OFF_TIMER 0xFEA6 #define REG_CFG_OOBS_ON_TIMER 0xFEA7 #define REG_CFG_VCM_ON_TIMER 0xFEA8 @@ -701,6 +714,13 @@ #define RTS5260_DVCC_TUNE_MASK 0x70 #define RTS5260_DVCC_33 0x70 +/*RTS5261*/ +#define RTS5261_LDO1_CFG0 0xFF72 +#define RTS5261_LDO1_OCP_THD_MASK (0x07 << 5) +#define RTS5261_LDO1_OCP_EN (0x01 << 4) +#define RTS5261_LDO1_OCP_LMT_THD_MASK (0x03 << 2) +#define RTS5261_LDO1_OCP_LMT_EN (0x01 << 1) + #define LDO_VCC_CFG1 0xFF73 #define LDO_VCC_REF_TUNE_MASK 0x30 #define LDO_VCC_REF_1V2 0x20 @@ -741,6 +761,8 @@ #define RTS5260_AUTOLOAD_CFG4 0xFF7F #define RTS5260_MIMO_DISABLE 0x8A +/*RTS5261*/ +#define RTS5261_AUX_CLK_16M_EN (1 << 5) #define RTS5260_REG_GPIO_CTL0 0xFC1A #define RTS5260_REG_GPIO_MASK 0x01 @@ -1191,6 +1213,7 @@ struct rtsx_pcr { #define EXTRA_CAPS_MMC_HS200 (1 << 4) #define EXTRA_CAPS_MMC_8BIT (1 << 5) #define EXTRA_CAPS_NO_MMC (1 << 7) +#define EXTRA_CAPS_SD_EXPRESS (1 << 8) u32 extra_caps; #define IC_VER_A 0 -- cgit v1.2.3 From 6b7b58f425c3359787483479d73c0bb98ffc65b8 Mon Sep 17 00:00:00 2001 From: Rui Feng Date: Tue, 3 Nov 2020 17:54:29 +0800 Subject: mmc: rtsx: Add test mode for RTS5261 This patch add test mode for RTS5261. If test mode is set, reader will switch to SD Express mode mandatorily, and this mode is used by factory testing only. Signed-off-by: Rui Feng Acked-by: Greg Kroah-Hartman Link: https://lore.kernel.org/r/1604397269-2780-1-git-send-email-rui_feng@realsil.com.cn Signed-off-by: Ulf Hansson --- include/linux/rtsx_pci.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/rtsx_pci.h b/include/linux/rtsx_pci.h index b47959f48ccd..db249e8707f3 100644 --- a/include/linux/rtsx_pci.h +++ b/include/linux/rtsx_pci.h @@ -658,6 +658,10 @@ #define PM_WAKE_EN 0x01 #define PM_CTRL4 0xFF47 +/* FW config info register */ +#define RTS5261_FW_CFG_INFO0 0xFF50 +#define RTS5261_FW_EXPRESS_TEST_MASK (0x01 << 0) +#define RTS5261_FW_EA_MODE_MASK (0x01 << 5) #define RTS5261_FW_CFG0 0xFF54 #define RTS5261_FW_ENTER_EXPRESS (0x01 << 0) -- cgit v1.2.3 From 1672617d512880f31d1d43ca0eb0d13d50b8c680 Mon Sep 17 00:00:00 2001 From: Rui Feng Date: Tue, 3 Nov 2020 17:55:12 +0800 Subject: misc: rtsx: Add hardware auto power off for RTS5261 This patch enable hardware auto power off when card is removed. Signed-off-by: Rui Feng Acked-by: Greg Kroah-Hartman Link: https://lore.kernel.org/r/1604397312-2991-1-git-send-email-rui_feng@realsil.com.cn Signed-off-by: Ulf Hansson --- include/linux/rtsx_pci.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/rtsx_pci.h b/include/linux/rtsx_pci.h index db249e8707f3..fcaadc7c9df1 100644 --- a/include/linux/rtsx_pci.h +++ b/include/linux/rtsx_pci.h @@ -82,6 +82,7 @@ #define MS_OC_INT_EN (1 << 23) #define SD_OC_INT_EN (1 << 22) +#define RTSX_DUM_REG 0x1C /* * macros for easy use @@ -1272,6 +1273,8 @@ struct rtsx_pcr { #define PCI_PID(pcr) ((pcr)->pci->device) #define is_version(pcr, pid, ver) \ (CHK_PCI_PID(pcr, pid) && (pcr)->ic_version == (ver)) +#define is_version_higher_than(pcr, pid, ver) \ + (CHK_PCI_PID(pcr, pid) && (pcr)->ic_version > (ver)) #define pcr_dbg(pcr, fmt, arg...) \ dev_dbg(&(pcr)->pci->dev, fmt, ##arg) -- cgit v1.2.3 From 30ae3e13caeaa47884c222ebf5711ce27ed25f19 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Wed, 25 Nov 2020 22:29:59 +0100 Subject: mmc: tmio: set max_busy_timeout Set max_busy_timeouts for variants known to support the TOPxx bits in the SD_OPTION register. The timeout mechanism was running in the background but not yet properly handled in the driver. So, let the MMC core know when to not use R1B to avoid unhandled timeouts. My datasheets for older variants (tmio_mmc.c) suggest that they support it, too. However, actual bit descriptions are lacking, so I chose an opt-in approach. Signed-off-by: Wolfram Sang Reviewed-by: Yoshihiro Shimoda Tested-by: Yoshihiro Shimoda Link: https://lore.kernel.org/r/20201125213001.15003-2-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson --- include/linux/mfd/tmio.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index 8ba042430d8e..27264fe4b3b9 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -55,7 +55,12 @@ */ #define TMIO_MMC_HAS_IDLE_WAIT BIT(4) -/* BIT(5) is unused */ +/* + * Use the busy timeout feature. Probably all TMIO versions support it. Yet, + * we don't have documentation for old variants, so we enable only known good + * variants with this flag. Can be removed once all variants are known good. + */ +#define TMIO_MMC_USE_BUSY_TIMEOUT BIT(5) /* * Some controllers have CMD12 automatically -- cgit v1.2.3